diff options
author | Miquel Raynal <miquel.raynal@bootlin.com> | 2019-01-29 10:36:30 +0100 |
---|---|---|
committer | Kishon Vijay Abraham I <kishon@ti.com> | 2019-02-07 11:11:03 +0530 |
commit | cc8b7a0ae866bb2ac8e4d089173a5e676105c8cb (patch) | |
tree | a15213a246e0a81c26646bcb7629f7fcc364af77 | |
parent | e25909f9b7feb58e6ba976d404e9bb53349b67bf (diff) | |
download | linux-cc8b7a0ae866bb2ac8e4d089173a5e676105c8cb.tar.bz2 |
phy: add A3700 UTMI PHY driver
Marvell Armada 3700 SoC has two USB controllers, each of them being
wired to an internal UTMI PHY. Add a driver to control them.
Igal Liberman worked on supporting the PHY, I took the while 'register
configuration' from his work and rewrote almost entirely the
driver/bindings around it.
Co-developed-by: Igal Liberman <igall@marvell.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Igal Liberman <igall@marvell.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
-rw-r--r-- | drivers/phy/marvell/Kconfig | 9 | ||||
-rw-r--r-- | drivers/phy/marvell/Makefile | 1 | ||||
-rw-r--r-- | drivers/phy/marvell/phy-mvebu-a3700-utmi.c | 278 |
3 files changed, 288 insertions, 0 deletions
diff --git a/drivers/phy/marvell/Kconfig b/drivers/phy/marvell/Kconfig index 9c90c0408ea3..b8e9dd38ad0d 100644 --- a/drivers/phy/marvell/Kconfig +++ b/drivers/phy/marvell/Kconfig @@ -33,6 +33,15 @@ config PHY_MVEBU_A3700_COMPHY shared serdes PHYs on Marvell Armada 3700. Its serdes lanes can be used by various controllers: Ethernet, SATA, USB3, PCIe. +config PHY_MVEBU_A3700_UTMI + tristate "Marvell A3700 UTMI driver" + depends on ARCH_MVEBU || COMPILE_TEST + depends on OF + default y + select GENERIC_PHY + help + Enable this to support Marvell A3700 UTMI PHY driver. + config PHY_MVEBU_CP110_COMPHY tristate "Marvell CP110 comphy driver" depends on ARCH_MVEBU || COMPILE_TEST diff --git a/drivers/phy/marvell/Makefile b/drivers/phy/marvell/Makefile index c13a0c8ab6f0..82f291cf59ee 100644 --- a/drivers/phy/marvell/Makefile +++ b/drivers/phy/marvell/Makefile @@ -3,6 +3,7 @@ obj-$(CONFIG_ARMADA375_USBCLUSTER_PHY) += phy-armada375-usb2.o obj-$(CONFIG_PHY_BERLIN_SATA) += phy-berlin-sata.o obj-$(CONFIG_PHY_BERLIN_USB) += phy-berlin-usb.o obj-$(CONFIG_PHY_MVEBU_A3700_COMPHY) += phy-mvebu-a3700-comphy.o +obj-$(CONFIG_PHY_MVEBU_A3700_UTMI) += phy-mvebu-a3700-utmi.o obj-$(CONFIG_PHY_MVEBU_CP110_COMPHY) += phy-mvebu-cp110-comphy.o obj-$(CONFIG_PHY_MVEBU_SATA) += phy-mvebu-sata.o obj-$(CONFIG_PHY_PXA_28NM_HSIC) += phy-pxa-28nm-hsic.o diff --git a/drivers/phy/marvell/phy-mvebu-a3700-utmi.c b/drivers/phy/marvell/phy-mvebu-a3700-utmi.c new file mode 100644 index 000000000000..94a29dea57af --- /dev/null +++ b/drivers/phy/marvell/phy-mvebu-a3700-utmi.c @@ -0,0 +1,278 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2018 Marvell + * + * Authors: + * Igal Liberman <igall@marvell.com> + * Miquèl Raynal <miquel.raynal@bootlin.com> + * + * Marvell A3700 UTMI PHY driver + */ + +#include <linux/io.h> +#include <linux/iopoll.h> +#include <linux/mfd/syscon.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/phy/phy.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> + +/* Armada 3700 UTMI PHY registers */ +#define USB2_PHY_PLL_CTRL_REG0 0x0 +#define PLL_REF_DIV_OFF 0 +#define PLL_REF_DIV_MASK GENMASK(6, 0) +#define PLL_REF_DIV_5 5 +#define PLL_FB_DIV_OFF 16 +#define PLL_FB_DIV_MASK GENMASK(24, 16) +#define PLL_FB_DIV_96 96 +#define PLL_SEL_LPFR_OFF 28 +#define PLL_SEL_LPFR_MASK GENMASK(29, 28) +#define PLL_READY BIT(31) +#define USB2_PHY_CAL_CTRL 0x8 +#define PHY_PLLCAL_DONE BIT(31) +#define PHY_IMPCAL_DONE BIT(23) +#define USB2_RX_CHAN_CTRL1 0x18 +#define USB2PHY_SQCAL_DONE BIT(31) +#define USB2_PHY_OTG_CTRL 0x34 +#define PHY_PU_OTG BIT(4) +#define USB2_PHY_CHRGR_DETECT 0x38 +#define PHY_CDP_EN BIT(2) +#define PHY_DCP_EN BIT(3) +#define PHY_PD_EN BIT(4) +#define PHY_PU_CHRG_DTC BIT(5) +#define PHY_CDP_DM_AUTO BIT(7) +#define PHY_ENSWITCH_DP BIT(12) +#define PHY_ENSWITCH_DM BIT(13) + +/* Armada 3700 USB miscellaneous registers */ +#define USB2_PHY_CTRL(usb32) (usb32 ? 0x20 : 0x4) +#define RB_USB2PHY_PU BIT(0) +#define USB2_DP_PULLDN_DEV_MODE BIT(5) +#define USB2_DM_PULLDN_DEV_MODE BIT(6) +#define RB_USB2PHY_SUSPM(usb32) (usb32 ? BIT(14) : BIT(7)) + +#define PLL_LOCK_DELAY_US 10000 +#define PLL_LOCK_TIMEOUT_US 1000000 + +/** + * struct mvebu_a3700_utmi_caps - PHY capabilities + * + * @usb32: Flag indicating which PHY is in use (impacts the register map): + * - The UTMI PHY wired to the USB3/USB2 controller (otg) + * - The UTMI PHY wired to the USB2 controller (host only) + * @ops: PHY operations + */ +struct mvebu_a3700_utmi_caps { + int usb32; + const struct phy_ops *ops; +}; + +/** + * struct mvebu_a3700_utmi - PHY driver data + * + * @regs: PHY registers + * @usb_mis: Regmap with USB miscellaneous registers including PHY ones + * @caps: PHY capabilities + * @phy: PHY handle + */ +struct mvebu_a3700_utmi { + void __iomem *regs; + struct regmap *usb_misc; + const struct mvebu_a3700_utmi_caps *caps; + struct phy *phy; +}; + +static int mvebu_a3700_utmi_phy_power_on(struct phy *phy) +{ + struct mvebu_a3700_utmi *utmi = phy_get_drvdata(phy); + struct device *dev = &phy->dev; + int usb32 = utmi->caps->usb32; + int ret = 0; + u32 reg; + + /* + * Setup PLL. 40MHz clock used to be the default, being 25MHz now. + * See "PLL Settings for Typical REFCLK" table. + */ + reg = readl(utmi->regs + USB2_PHY_PLL_CTRL_REG0); + reg &= ~(PLL_REF_DIV_MASK | PLL_FB_DIV_MASK | PLL_SEL_LPFR_MASK); + reg |= (PLL_REF_DIV_5 << PLL_REF_DIV_OFF) | + (PLL_FB_DIV_96 << PLL_FB_DIV_OFF); + writel(reg, utmi->regs + USB2_PHY_PLL_CTRL_REG0); + + /* Enable PHY pull up and disable USB2 suspend */ + regmap_update_bits(utmi->usb_misc, USB2_PHY_CTRL(usb32), + RB_USB2PHY_SUSPM(usb32) | RB_USB2PHY_PU, + RB_USB2PHY_SUSPM(usb32) | RB_USB2PHY_PU); + + if (usb32) { + /* Power up OTG module */ + reg = readl(utmi->regs + USB2_PHY_OTG_CTRL); + reg |= PHY_PU_OTG; + writel(reg, utmi->regs + USB2_PHY_OTG_CTRL); + + /* Disable PHY charger detection */ + reg = readl(utmi->regs + USB2_PHY_CHRGR_DETECT); + reg &= ~(PHY_CDP_EN | PHY_DCP_EN | PHY_PD_EN | PHY_PU_CHRG_DTC | + PHY_CDP_DM_AUTO | PHY_ENSWITCH_DP | PHY_ENSWITCH_DM); + writel(reg, utmi->regs + USB2_PHY_CHRGR_DETECT); + + /* Disable PHY DP/DM pull-down (used for device mode) */ + regmap_update_bits(utmi->usb_misc, USB2_PHY_CTRL(usb32), + USB2_DP_PULLDN_DEV_MODE | + USB2_DM_PULLDN_DEV_MODE, 0); + } + + /* Wait for PLL calibration */ + ret = readl_poll_timeout(utmi->regs + USB2_PHY_CAL_CTRL, reg, + reg & PHY_PLLCAL_DONE, + PLL_LOCK_DELAY_US, PLL_LOCK_TIMEOUT_US); + if (ret) { + dev_err(dev, "Failed to end USB2 PLL calibration\n"); + return ret; + } + + /* Wait for impedance calibration */ + ret = readl_poll_timeout(utmi->regs + USB2_PHY_CAL_CTRL, reg, + reg & PHY_IMPCAL_DONE, + PLL_LOCK_DELAY_US, PLL_LOCK_TIMEOUT_US); + if (ret) { + dev_err(dev, "Failed to end USB2 impedance calibration\n"); + return ret; + } + + /* Wait for squelch calibration */ + ret = readl_poll_timeout(utmi->regs + USB2_RX_CHAN_CTRL1, reg, + reg & USB2PHY_SQCAL_DONE, + PLL_LOCK_DELAY_US, PLL_LOCK_TIMEOUT_US); + if (ret) { + dev_err(dev, "Failed to end USB2 unknown calibration\n"); + return ret; + } + + /* Wait for PLL to be locked */ + ret = readl_poll_timeout(utmi->regs + USB2_PHY_PLL_CTRL_REG0, reg, + reg & PLL_READY, + PLL_LOCK_DELAY_US, PLL_LOCK_TIMEOUT_US); + if (ret) + dev_err(dev, "Failed to lock USB2 PLL\n"); + + return ret; +} + +static int mvebu_a3700_utmi_phy_power_off(struct phy *phy) +{ + struct mvebu_a3700_utmi *utmi = phy_get_drvdata(phy); + int usb32 = utmi->caps->usb32; + u32 reg; + + /* Disable PHY pull-up and enable USB2 suspend */ + reg = readl(utmi->regs + USB2_PHY_CTRL(usb32)); + reg &= ~(RB_USB2PHY_PU | RB_USB2PHY_SUSPM(usb32)); + writel(reg, utmi->regs + USB2_PHY_CTRL(usb32)); + + /* Power down OTG module */ + if (usb32) { + reg = readl(utmi->regs + USB2_PHY_OTG_CTRL); + reg &= ~PHY_PU_OTG; + writel(reg, utmi->regs + USB2_PHY_OTG_CTRL); + } + + return 0; +} + +static const struct phy_ops mvebu_a3700_utmi_phy_ops = { + .power_on = mvebu_a3700_utmi_phy_power_on, + .power_off = mvebu_a3700_utmi_phy_power_off, + .owner = THIS_MODULE, +}; + +static const struct mvebu_a3700_utmi_caps mvebu_a3700_utmi_otg_phy_caps = { + .usb32 = true, + .ops = &mvebu_a3700_utmi_phy_ops, +}; + +static const struct mvebu_a3700_utmi_caps mvebu_a3700_utmi_host_phy_caps = { + .usb32 = false, + .ops = &mvebu_a3700_utmi_phy_ops, +}; + +static const struct of_device_id mvebu_a3700_utmi_of_match[] = { + { + .compatible = "marvell,a3700-utmi-otg-phy", + .data = &mvebu_a3700_utmi_otg_phy_caps, + }, + { + .compatible = "marvell,a3700-utmi-host-phy", + .data = &mvebu_a3700_utmi_host_phy_caps, + }, + {}, +}; +MODULE_DEVICE_TABLE(of, mvebu_a3700_utmi_of_match); + +static int mvebu_a3700_utmi_phy_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct mvebu_a3700_utmi *utmi; + struct phy_provider *provider; + struct resource *res; + + utmi = devm_kzalloc(dev, sizeof(*utmi), GFP_KERNEL); + if (!utmi) + return -ENOMEM; + + /* Get UTMI memory region */ + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(dev, "Missing UTMI PHY memory resource\n"); + return -ENODEV; + } + + utmi->regs = devm_ioremap_resource(dev, res); + if (IS_ERR(utmi->regs)) + return PTR_ERR(utmi->regs); + + /* Get miscellaneous Host/PHY region */ + utmi->usb_misc = syscon_regmap_lookup_by_phandle(dev->of_node, + "marvell,usb-misc-reg"); + if (IS_ERR(utmi->usb_misc)) { + dev_err(dev, + "Missing USB misc purpose system controller\n"); + return PTR_ERR(utmi->usb_misc); + } + + /* Retrieve PHY capabilities */ + utmi->caps = of_device_get_match_data(dev); + + /* Instantiate the PHY */ + utmi->phy = devm_phy_create(dev, NULL, utmi->caps->ops); + if (IS_ERR(utmi->phy)) { + dev_err(dev, "Failed to create the UTMI PHY\n"); + return PTR_ERR(utmi->phy); + } + + phy_set_drvdata(utmi->phy, utmi); + + /* Ensure the PHY is powered off */ + utmi->caps->ops->power_off(utmi->phy); + + provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + + return PTR_ERR_OR_ZERO(provider); +} + +static struct platform_driver mvebu_a3700_utmi_driver = { + .probe = mvebu_a3700_utmi_phy_probe, + .driver = { + .name = "mvebu-a3700-utmi-phy", + .owner = THIS_MODULE, + .of_match_table = mvebu_a3700_utmi_of_match, + }, +}; +module_platform_driver(mvebu_a3700_utmi_driver); + +MODULE_AUTHOR("Igal Liberman <igall@marvell.com>"); +MODULE_AUTHOR("Miquel Raynal <miquel.raynal@bootlin.com>"); +MODULE_DESCRIPTION("Marvell EBU A3700 UTMI PHY driver"); +MODULE_LICENSE("GPL v2"); |