Merge tag 'staging-4.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging/iio fixes from Greg KH:
 "Here are few small staging driver fixes, and some more IIO driver
  fixes for 4.13-rc7. Nothing major, just resolutions for some reported
  problems.

  All of these have been in linux-next with no reported problems"

* tag 'staging-4.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  iio: magnetometer: st_magn: remove ihl property for LSM303AGR
  iio: magnetometer: st_magn: fix status register address for LSM303AGR
  iio: hid-sensor-trigger: Fix the race with user space powering up sensors
  iio: trigger: stm32-timer: fix get trigger mode
  iio: imu: adis16480: Fix acceleration scale factor for adis16480
  PATCH] iio: Fix some documentation warnings
  staging: rtl8188eu: add RNX-N150NUB support
  Revert "staging: fsl-mc: be consistent when checking strcmp() return"
  iio: adc: stm32: fix common clock rate
  iio: adc: ina219: Avoid underflow for sleeping time
  iio: trigger: stm32-timer: add enable attribute
  iio: trigger: stm32-timer: fix get/set down count direction
  iio: trigger: stm32-timer: fix write_raw return value
  iio: trigger: stm32-timer: fix quadrature mode get routine
  iio: bmp280: properly initialize device for humidity reading

12 files changed, 107 insertions, 46 deletions

diff --git a/drivers/iio/adc/ina2xx-adc.c b/drivers/iio/adc/ina2xx-adc.c
index 232c0b80d658..c3f86138cb55 100644
--- a/drivers/iio/adc/ina2xx-adc.c
+++ b/drivers/iio/adc/ina2xx-adc.c
@@ -644,7 +644,7 @@ static int ina2xx_capture_thread(void *data)
 {
 	struct iio_dev *indio_dev = data;
 	struct ina2xx_chip_info *chip = iio_priv(indio_dev);
-	unsigned int sampling_us = SAMPLING_PERIOD(chip);
+	int sampling_us = SAMPLING_PERIOD(chip);
 	int buffer_us;
 
 	/*
diff --git a/drivers/iio/adc/stm32-adc-core.c b/drivers/iio/adc/stm32-adc-core.c
index e09233b03c05..609676384f5e 100644
--- a/drivers/iio/adc/stm32-adc-core.c
+++ b/drivers/iio/adc/stm32-adc-core.c
@@ -64,7 +64,7 @@
 #define STM32H7_CKMODE_MASK		GENMASK(17, 16)
 
 /* STM32 H7 maximum analog clock rate (from datasheet) */
-#define STM32H7_ADC_MAX_CLK_RATE	72000000
+#define STM32H7_ADC_MAX_CLK_RATE	36000000
 
 /**
  * stm32_adc_common_regs - stm32 common registers, compatible dependent data
@@ -148,14 +148,14 @@ static int stm32f4_adc_clk_sel(struct platform_device *pdev,
 		return -EINVAL;
 	}
 
-	priv->common.rate = rate;
+	priv->common.rate = rate / stm32f4_pclk_div[i];
 	val = readl_relaxed(priv->common.base + STM32F4_ADC_CCR);
 	val &= ~STM32F4_ADC_ADCPRE_MASK;
 	val |= i << STM32F4_ADC_ADCPRE_SHIFT;
 	writel_relaxed(val, priv->common.base + STM32F4_ADC_CCR);
 
 	dev_dbg(&pdev->dev, "Using analog clock source at %ld kHz\n",
-		rate / (stm32f4_pclk_div[i] * 1000));
+		priv->common.rate / 1000);
 
 	return 0;
 }
@@ -250,7 +250,7 @@ static int stm32h7_adc_clk_sel(struct platform_device *pdev,
 
 out:
 	/* rate used later by each ADC instance to control BOOST mode */
-	priv->common.rate = rate;
+	priv->common.rate = rate / div;
 
 	/* Set common clock mode and prescaler */
 	val = readl_relaxed(priv->common.base + STM32H7_ADC_CCR);
@@ -260,7 +260,7 @@ out:
 	writel_relaxed(val, priv->common.base + STM32H7_ADC_CCR);
 
 	dev_dbg(&pdev->dev, "Using %s clock/%d source at %ld kHz\n",
-		ckmode ? "bus" : "adc", div, rate / (div * 1000));
+		ckmode ? "bus" : "adc", div, priv->common.rate / 1000);
 
 	return 0;
 }
diff --git a/drivers/iio/common/hid-sensors/hid-sensor-trigger.c b/drivers/iio/common/hid-sensors/hid-sensor-trigger.c
index 16ade0a0327b..0e4b379ada45 100644
--- a/drivers/iio/common/hid-sensors/hid-sensor-trigger.c
+++ b/drivers/iio/common/hid-sensors/hid-sensor-trigger.c
@@ -111,8 +111,6 @@ static int _hid_sensor_power_state(struct hid_sensor_common *st, bool state)
 	s32 poll_value = 0;
 
 	if (state) {
-		if (!atomic_read(&st->user_requested_state))
-			return 0;
 		if (sensor_hub_device_open(st->hsdev))
 			return -EIO;
 
@@ -161,6 +159,9 @@ static int _hid_sensor_power_state(struct hid_sensor_common *st, bool state)
 				       &report_val);
 	}
 
+	pr_debug("HID_SENSOR %s set power_state %d report_state %d\n",
+		 st->pdev->name, state_val, report_val);
+
 	sensor_hub_get_feature(st->hsdev, st->power_state.report_id,
 			       st->power_state.index,
 			       sizeof(state_val), &state_val);
@@ -182,6 +183,7 @@ int hid_sensor_power_state(struct hid_sensor_common *st, bool state)
 		ret = pm_runtime_get_sync(&st->pdev->dev);
 	else {
 		pm_runtime_mark_last_busy(&st->pdev->dev);
+		pm_runtime_use_autosuspend(&st->pdev->dev);
 		ret = pm_runtime_put_autosuspend(&st->pdev->dev);
 	}
 	if (ret < 0) {
@@ -285,8 +287,6 @@ int hid_sensor_setup_trigger(struct iio_dev *indio_dev, const char *name,
 	/* Default to 3 seconds, but can be changed from sysfs */
 	pm_runtime_set_autosuspend_delay(&attrb->pdev->dev,
 					 3000);
-	pm_runtime_use_autosuspend(&attrb->pdev->dev);
-
 	return ret;
 error_unreg_trigger:
 	iio_trigger_unregister(trig);
diff --git a/drivers/iio/imu/adis16480.c b/drivers/iio/imu/adis16480.c
index 8cf84d3488b2..12898424d838 100644
--- a/drivers/iio/imu/adis16480.c
+++ b/drivers/iio/imu/adis16480.c
@@ -696,7 +696,7 @@ static const struct adis16480_chip_info adis16480_chip_info[] = {
 		.gyro_max_val = IIO_RAD_TO_DEGREE(22500),
 		.gyro_max_scale = 450,
 		.accel_max_val = IIO_M_S_2_TO_G(12500),
-		.accel_max_scale = 5,
+		.accel_max_scale = 10,
 	},
 	[ADIS16485] = {
 		.channels = adis16485_channels,
diff --git a/drivers/iio/magnetometer/st_magn_core.c b/drivers/iio/magnetometer/st_magn_core.c
index 8e1b0861fbe4..c38563699984 100644
--- a/drivers/iio/magnetometer/st_magn_core.c
+++ b/drivers/iio/magnetometer/st_magn_core.c
@@ -356,9 +356,7 @@ static const struct st_sensor_settings st_magn_sensors_settings[] = {
 		.drdy_irq = {
 			.addr = 0x62,
 			.mask_int1 = 0x01,
-			.addr_ihl = 0x63,
-			.mask_ihl = 0x04,
-			.addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR,
+			.addr_stat_drdy = 0x67,
 		},
 		.multi_read_bit = false,
 		.bootime = 2,
diff --git a/drivers/iio/pressure/bmp280-core.c b/drivers/iio/pressure/bmp280-core.c
index d82b788374b6..0d2ea3ee371b 100644
--- a/drivers/iio/pressure/bmp280-core.c
+++ b/drivers/iio/pressure/bmp280-core.c
@@ -282,6 +282,11 @@ static int bmp280_read_temp(struct bmp280_data *data,
 	}
 
 	adc_temp = be32_to_cpu(tmp) >> 12;
+	if (adc_temp == BMP280_TEMP_SKIPPED) {
+		/* reading was skipped */
+		dev_err(data->dev, "reading temperature skipped\n");
+		return -EIO;
+	}
 	comp_temp = bmp280_compensate_temp(data, adc_temp);
 
 	/*
@@ -317,6 +322,11 @@ static int bmp280_read_press(struct bmp280_data *data,
 	}
 
 	adc_press = be32_to_cpu(tmp) >> 12;
+	if (adc_press == BMP280_PRESS_SKIPPED) {
+		/* reading was skipped */
+		dev_err(data->dev, "reading pressure skipped\n");
+		return -EIO;
+	}
 	comp_press = bmp280_compensate_press(data, adc_press);
 
 	*val = comp_press;
@@ -345,6 +355,11 @@ static int bmp280_read_humid(struct bmp280_data *data, int *val, int *val2)
 	}
 
 	adc_humidity = be16_to_cpu(tmp);
+	if (adc_humidity == BMP280_HUMIDITY_SKIPPED) {
+		/* reading was skipped */
+		dev_err(data->dev, "reading humidity skipped\n");
+		return -EIO;
+	}
 	comp_humidity = bmp280_compensate_humidity(data, adc_humidity);
 
 	*val = comp_humidity;
@@ -597,14 +612,20 @@ static const struct bmp280_chip_info bmp280_chip_info = {
 
 static int bme280_chip_config(struct bmp280_data *data)
 {
-	int ret = bmp280_chip_config(data);
+	int ret;
 	u8 osrs = BMP280_OSRS_HUMIDITIY_X(data->oversampling_humid + 1);
 
+	/*
+	 * Oversampling of humidity must be set before oversampling of
+	 * temperature/pressure is set to become effective.
+	 */
+	ret = regmap_update_bits(data->regmap, BMP280_REG_CTRL_HUMIDITY,
+				  BMP280_OSRS_HUMIDITY_MASK, osrs);
+
 	if (ret < 0)
 		return ret;
 
-	return regmap_update_bits(data->regmap, BMP280_REG_CTRL_HUMIDITY,
-				  BMP280_OSRS_HUMIDITY_MASK, osrs);
+	return bmp280_chip_config(data);
 }
 
 static const struct bmp280_chip_info bme280_chip_info = {
diff --git a/drivers/iio/pressure/bmp280.h b/drivers/iio/pressure/bmp280.h
index 2c770e13be0e..61347438b779 100644
--- a/drivers/iio/pressure/bmp280.h
+++ b/drivers/iio/pressure/bmp280.h
@@ -96,6 +96,11 @@
 #define BME280_CHIP_ID			0x60
 #define BMP280_SOFT_RESET_VAL		0xB6
 
+/* BMP280 register skipped special values */
+#define BMP280_TEMP_SKIPPED		0x80000
+#define BMP280_PRESS_SKIPPED		0x80000
+#define BMP280_HUMIDITY_SKIPPED		0x8000
+
 /* Regmap configurations */
 extern const struct regmap_config bmp180_regmap_config;
 extern const struct regmap_config bmp280_regmap_config;
diff --git a/drivers/iio/trigger/stm32-timer-trigger.c b/drivers/iio/trigger/stm32-timer-trigger.c
index d22bc56dd9fc..25ad6abfee22 100644
--- a/drivers/iio/trigger/stm32-timer-trigger.c
+++ b/drivers/iio/trigger/stm32-timer-trigger.c
@@ -366,34 +366,32 @@ static int stm32_counter_read_raw(struct iio_dev *indio_dev,
 				  int *val, int *val2, long mask)
 {
 	struct stm32_timer_trigger *priv = iio_priv(indio_dev);
+	u32 dat;
 
 	switch (mask) {
 	case IIO_CHAN_INFO_RAW:
-	{
-		u32 cnt;
-
-		regmap_read(priv->regmap, TIM_CNT, &cnt);
-		*val = cnt;
+		regmap_read(priv->regmap, TIM_CNT, &dat);
+		*val = dat;
+		return IIO_VAL_INT;
 
+	case IIO_CHAN_INFO_ENABLE:
+		regmap_read(priv->regmap, TIM_CR1, &dat);
+		*val = (dat & TIM_CR1_CEN) ? 1 : 0;
 		return IIO_VAL_INT;
-	}
-	case IIO_CHAN_INFO_SCALE:
-	{
-		u32 smcr;
 
-		regmap_read(priv->regmap, TIM_SMCR, &smcr);
-		smcr &= TIM_SMCR_SMS;
+	case IIO_CHAN_INFO_SCALE:
+		regmap_read(priv->regmap, TIM_SMCR, &dat);
+		dat &= TIM_SMCR_SMS;
 
 		*val = 1;
 		*val2 = 0;
 
 		/* in quadrature case scale = 0.25 */
-		if (smcr == 3)
+		if (dat == 3)
 			*val2 = 2;
 
 		return IIO_VAL_FRACTIONAL_LOG2;
 	}
-	}
 
 	return -EINVAL;
 }
@@ -403,15 +401,31 @@ static int stm32_counter_write_raw(struct iio_dev *indio_dev,
 				   int val, int val2, long mask)
 {
 	struct stm32_timer_trigger *priv = iio_priv(indio_dev);
+	u32 dat;
 
 	switch (mask) {
 	case IIO_CHAN_INFO_RAW:
-		regmap_write(priv->regmap, TIM_CNT, val);
+		return regmap_write(priv->regmap, TIM_CNT, val);
 
-		return IIO_VAL_INT;
 	case IIO_CHAN_INFO_SCALE:
 		/* fixed scale */
 		return -EINVAL;
+
+	case IIO_CHAN_INFO_ENABLE:
+		if (val) {
+			regmap_read(priv->regmap, TIM_CR1, &dat);
+			if (!(dat & TIM_CR1_CEN))
+				clk_enable(priv->clk);
+			regmap_update_bits(priv->regmap, TIM_CR1, TIM_CR1_CEN,
+					   TIM_CR1_CEN);
+		} else {
+			regmap_read(priv->regmap, TIM_CR1, &dat);
+			regmap_update_bits(priv->regmap, TIM_CR1, TIM_CR1_CEN,
+					   0);
+			if (dat & TIM_CR1_CEN)
+				clk_disable(priv->clk);
+		}
+		return 0;
 	}
 
 	return -EINVAL;
@@ -471,7 +485,7 @@ static int stm32_get_trigger_mode(struct iio_dev *indio_dev,
 
 	regmap_read(priv->regmap, TIM_SMCR, &smcr);
 
-	return smcr == TIM_SMCR_SMS ? 0 : -EINVAL;
+	return (smcr & TIM_SMCR_SMS) == TIM_SMCR_SMS ? 0 : -EINVAL;
 }
 
 static const struct iio_enum stm32_trigger_mode_enum = {
@@ -507,9 +521,19 @@ static int stm32_set_enable_mode(struct iio_dev *indio_dev,
 {
 	struct stm32_timer_trigger *priv = iio_priv(indio_dev);
 	int sms = stm32_enable_mode2sms(mode);
+	u32 val;
 
 	if (sms < 0)
 		return sms;
+	/*
+	 * Triggered mode sets CEN bit automatically by hardware. So, first
+	 * enable counter clock, so it can use it. Keeps it in sync with CEN.
+	 */
+	if (sms == 6) {
+		regmap_read(priv->regmap, TIM_CR1, &val);
+		if (!(val & TIM_CR1_CEN))
+			clk_enable(priv->clk);
+	}
 
 	regmap_update_bits(priv->regmap, TIM_SMCR, TIM_SMCR_SMS, sms);
 
@@ -571,11 +595,14 @@ static int stm32_get_quadrature_mode(struct iio_dev *indio_dev,
 {
 	struct stm32_timer_trigger *priv = iio_priv(indio_dev);
 	u32 smcr;
+	int mode;
 
 	regmap_read(priv->regmap, TIM_SMCR, &smcr);
-	smcr &= TIM_SMCR_SMS;
+	mode = (smcr & TIM_SMCR_SMS) - 1;
+	if ((mode < 0) || (mode > ARRAY_SIZE(stm32_quadrature_modes)))
+		return -EINVAL;
 
-	return smcr - 1;
+	return mode;
 }
 
 static const struct iio_enum stm32_quadrature_mode_enum = {
@@ -592,13 +619,20 @@ static const char *const stm32_count_direction_states[] = {
 
 static int stm32_set_count_direction(struct iio_dev *indio_dev,
 				     const struct iio_chan_spec *chan,
-				     unsigned int mode)
+				     unsigned int dir)
 {
 	struct stm32_timer_trigger *priv = iio_priv(indio_dev);
+	u32 val;
+	int mode;
 
-	regmap_update_bits(priv->regmap, TIM_CR1, TIM_CR1_DIR, mode);
+	/* In encoder mode, direction is RO (given by TI1/TI2 signals) */
+	regmap_read(priv->regmap, TIM_SMCR, &val);
+	mode = (val & TIM_SMCR_SMS) - 1;
+	if ((mode >= 0) || (mode < ARRAY_SIZE(stm32_quadrature_modes)))
+		return -EBUSY;
 
-	return 0;
+	return regmap_update_bits(priv->regmap, TIM_CR1, TIM_CR1_DIR,
+				  dir ? TIM_CR1_DIR : 0);
 }
 
 static int stm32_get_count_direction(struct iio_dev *indio_dev,
@@ -609,7 +643,7 @@ static int stm32_get_count_direction(struct iio_dev *indio_dev,
 
 	regmap_read(priv->regmap, TIM_CR1, &cr1);
 
-	return (cr1 & TIM_CR1_DIR);
+	return ((cr1 & TIM_CR1_DIR) ? 1 : 0);
 }
 
 static const struct iio_enum stm32_count_direction_enum = {
@@ -672,7 +706,9 @@ static const struct iio_chan_spec_ext_info stm32_trigger_count_info[] = {
 static const struct iio_chan_spec stm32_trigger_channel = {
 	.type = IIO_COUNT,
 	.channel = 0,
-	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+			      BIT(IIO_CHAN_INFO_ENABLE) |
+			      BIT(IIO_CHAN_INFO_SCALE),
 	.ext_info = stm32_trigger_count_info,
 	.indexed = 1
 };
diff --git a/drivers/staging/fsl-mc/bus/fsl-mc-allocator.c b/drivers/staging/fsl-mc/bus/fsl-mc-allocator.c
index b37a6f48225f..8ea3920400a0 100644
--- a/drivers/staging/fsl-mc/bus/fsl-mc-allocator.c
+++ b/drivers/staging/fsl-mc/bus/fsl-mc-allocator.c
@@ -16,9 +16,9 @@
 
 static bool __must_check fsl_mc_is_allocatable(const char *obj_type)
 {
-	return strcmp(obj_type, "dpbp") ||
-	       strcmp(obj_type, "dpmcp") ||
-	       strcmp(obj_type, "dpcon");
+	return strcmp(obj_type, "dpbp") == 0 ||
+	       strcmp(obj_type, "dpmcp") == 0 ||
+	       strcmp(obj_type, "dpcon") == 0;
 }
 
 /**
diff --git a/drivers/staging/rtl8188eu/os_dep/usb_intf.c b/drivers/staging/rtl8188eu/os_dep/usb_intf.c
index d283341cfe43..56cd4e5e51b2 100644
--- a/drivers/staging/rtl8188eu/os_dep/usb_intf.c
+++ b/drivers/staging/rtl8188eu/os_dep/usb_intf.c
@@ -45,6 +45,7 @@ static struct usb_device_id rtw_usb_id_tbl[] = {
 	{USB_DEVICE(0x2001, 0x3311)}, /* DLink GO-USB-N150 REV B1 */
 	{USB_DEVICE(0x2357, 0x010c)}, /* TP-Link TL-WN722N v2 */
 	{USB_DEVICE(0x0df6, 0x0076)}, /* Sitecom N150 v2 */
+	{USB_DEVICE(USB_VENDER_ID_REALTEK, 0xffef)}, /* Rosewill RNX-N150NUB */
 	{}	/* Terminating entry */
 };
 
diff --git a/include/linux/iio/iio.h b/include/linux/iio/iio.h
index d68bec297a45..c380daa40c0e 100644
--- a/include/linux/iio/iio.h
+++ b/include/linux/iio/iio.h
@@ -535,7 +535,7 @@ struct iio_buffer_setup_ops {
  * @scan_timestamp:	[INTERN] set if any buffers have requested timestamp
  * @scan_index_timestamp:[INTERN] cache of the index to the timestamp
  * @trig:		[INTERN] current device trigger (buffer modes)
- * @trig_readonly	[INTERN] mark the current trigger immutable
+ * @trig_readonly:	[INTERN] mark the current trigger immutable
  * @pollfunc:		[DRIVER] function run on trigger being received
  * @pollfunc_event:	[DRIVER] function run on events trigger being received
  * @channels:		[DRIVER] channel specification structure table
diff --git a/include/linux/iio/trigger.h b/include/linux/iio/trigger.h
index ea08302f2d7b..7142d8d6e470 100644
--- a/include/linux/iio/trigger.h
+++ b/include/linux/iio/trigger.h
@@ -144,8 +144,8 @@ void devm_iio_trigger_unregister(struct device *dev,
 /**
  * iio_trigger_set_immutable() - set an immutable trigger on destination
  *
- * @indio_dev - IIO device structure containing the device
- * @trig - trigger to assign to device
+ * @indio_dev: IIO device structure containing the device
+ * @trig: trigger to assign to device
  *
  **/
 int iio_trigger_set_immutable(struct iio_dev *indio_dev, struct iio_trigger *trig);