Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next

Johan Hedberg says:

====================
pull request: bluetooth-next 2016-12-03

Here's a set of Bluetooth & 802.15.4 patches for net-next (i.e. 4.10
kernel):

 - Fix for a potential NULL deref in the ieee802154 netlink code
 - Fix for the ED values of the at86rf2xx driver
 - Documentation updates to ieee802154
 - Cleanups to u8 vs __u8 usage
 - Timer API usage cleanups in HCI drivers

Please let me know if there are any issues pulling. Thanks.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

9 files changed, 47 insertions, 46 deletions

diff --git a/Documentation/networking/ieee802154.txt b/Documentation/networking/ieee802154.txt
index aa69ccc481db..c4114346f054 100644
--- a/Documentation/networking/ieee802154.txt
+++ b/Documentation/networking/ieee802154.txt
@@ -4,20 +4,20 @@
 
 Introduction
 ============
-The IEEE 802.15.4 working group focuses on standardization of bottom
-two layers: Medium Access Control (MAC) and Physical (PHY). And there
+The IEEE 802.15.4 working group focuses on standardization of the bottom
+two layers: Medium Access Control (MAC) and Physical access (PHY). And there
 are mainly two options available for upper layers:
  - ZigBee - proprietary protocol from the ZigBee Alliance
  - 6LoWPAN - IPv6 networking over low rate personal area networks
 
-The linux-wpan project goal is to provide a complete implementation
+The goal of the Linux-wpan is to provide a complete implementation
 of the IEEE 802.15.4 and 6LoWPAN protocols. IEEE 802.15.4 is a stack
 of protocols for organizing Low-Rate Wireless Personal Area Networks.
 
 The stack is composed of three main parts:
  - IEEE 802.15.4 layer;  We have chosen to use plain Berkeley socket API,
-   the generic Linux networking stack to transfer IEEE 802.15.4 messages
-   and a special protocol over genetlink for configuration/management
+   the generic Linux networking stack to transfer IEEE 802.15.4 data
+   messages and a special protocol over netlink for configuration/management
  - MAC - provides access to shared channel and reliable data delivery
  - PHY - represents device drivers
 
@@ -33,15 +33,13 @@ include/net/af_ieee802154.h header or in the special header
 in the userspace package (see either http://wpan.cakelab.org/ or the
 git tree at https://github.com/linux-wpan/wpan-tools).
 
-One can use SOCK_RAW for passing raw data towards device xmit function. YMMV.
-
 
 Kernel side
 =============
 
 Like with WiFi, there are several types of devices implementing IEEE 802.15.4.
 1) 'HardMAC'. The MAC layer is implemented in the device itself, the device
-   exports MLME and data API.
+   exports a management (e.g. MLME) and data API.
 2) 'SoftMAC' or just radio. These types of devices are just radio transceivers
    possibly with some kinds of acceleration like automatic CRC computation and
    comparation, automagic ACK handling, address matching, etc.
@@ -106,7 +104,7 @@ Fake drivers
 
 In addition there is a driver available which simulates a real device with
 SoftMAC (fakelb - IEEE 802.15.4 loopback driver) interface. This option
-provides possibility to test and debug stack without usage of real hardware.
+provides a possibility to test and debug the stack without usage of real hardware.
 
 See sources in drivers/net/ieee802154 folder for more details.
 
@@ -125,17 +123,15 @@ to support the IPv6 minimum MTU requirement [RFC2460], and stateless header
 compression for IPv6 datagrams (LOWPAN_HC1 and LOWPAN_HC2) to reduce the
 relatively large IPv6 and UDP headers down to (in the best case) several bytes.
 
-In Semptember 2011 the standard update was published - [RFC6282].
+In September 2011 the standard update was published - [RFC6282].
 It deprecates HC1 and HC2 compression and defines IPHC encoding format which is
 used in this Linux implementation.
 
 All the code related to 6lowpan you may find in files: net/6lowpan/*
 and net/ieee802154/6lowpan/*
 
-To setup 6lowpan interface you need (busybox release > 1.17.0):
-1. Add IEEE802.15.4 interface and initialize PANid;
+To setup a 6LoWPAN interface you need:
+1. Add IEEE802.15.4 interface and set channel and PAN ID;
 2. Add 6lowpan interface by command like:
    # ip link add link wpan0 name lowpan0 type lowpan
-3. Set MAC (if needs):
-   # ip link set lowpan0 address de:ad:be:ef:ca:fe:ba:be
-4. Bring up 'lowpan0' interface
+3. Bring up 'lowpan0' interface
diff --git a/MAINTAINERS b/MAINTAINERS
index e773ad5446e3..c04f619c3532 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6105,6 +6105,7 @@ F:	drivers/idle/i7300_idle.c
 
 IEEE 802.15.4 SUBSYSTEM
 M:	Alexander Aring <aar@pengutronix.de>
+M:	Stefan Schmidt <stefan@osg.samsung.com>
 L:	linux-wpan@vger.kernel.org
 W:	http://wpan.cakelab.org/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth.git
diff --git a/drivers/bluetooth/hci_bcsp.c b/drivers/bluetooth/hci_bcsp.c
index a2c921faaa12..910ec968f022 100644
--- a/drivers/bluetooth/hci_bcsp.c
+++ b/drivers/bluetooth/hci_bcsp.c
@@ -733,9 +733,7 @@ static int bcsp_open(struct hci_uart *hu)
 	skb_queue_head_init(&bcsp->rel);
 	skb_queue_head_init(&bcsp->unrel);
 
-	init_timer(&bcsp->tbcsp);
-	bcsp->tbcsp.function = bcsp_timed_event;
-	bcsp->tbcsp.data     = (u_long)hu;
+	setup_timer(&bcsp->tbcsp, bcsp_timed_event, (u_long)hu);
 
 	bcsp->rx_state = BCSP_W4_PKT_DELIMITER;
 
diff --git a/drivers/bluetooth/hci_h5.c b/drivers/bluetooth/hci_h5.c
index 0879d64b1caf..90d0456b6744 100644
--- a/drivers/bluetooth/hci_h5.c
+++ b/drivers/bluetooth/hci_h5.c
@@ -204,9 +204,7 @@ static int h5_open(struct hci_uart *hu)
 
 	h5_reset_rx(h5);
 
-	init_timer(&h5->timer);
-	h5->timer.function = h5_timed_event;
-	h5->timer.data = (unsigned long)hu;
+	setup_timer(&h5->timer, h5_timed_event, (unsigned long)hu);
 
 	h5->tx_win = H5_TX_WIN_MAX;
 
diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index 6c867fbc56a7..05c230719a47 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -438,14 +438,11 @@ static int qca_open(struct hci_uart *hu)
 
 	hu->priv = qca;
 
-	init_timer(&qca->wake_retrans_timer);
-	qca->wake_retrans_timer.function = hci_ibs_wake_retrans_timeout;
-	qca->wake_retrans_timer.data = (u_long)hu;
+	setup_timer(&qca->wake_retrans_timer, hci_ibs_wake_retrans_timeout,
+		    (u_long)hu);
 	qca->wake_retrans = IBS_WAKE_RETRANS_TIMEOUT_MS;
 
-	init_timer(&qca->tx_idle_timer);
-	qca->tx_idle_timer.function = hci_ibs_tx_idle_timeout;
-	qca->tx_idle_timer.data = (u_long)hu;
+	setup_timer(&qca->tx_idle_timer, hci_ibs_tx_idle_timeout, (u_long)hu);
 	qca->tx_idle_delay = IBS_TX_IDLE_TIMEOUT_MS;
 
 	BT_DBG("HCI_UART_QCA open, tx_idle_delay=%u, wake_retrans=%u",
diff --git a/drivers/net/ieee802154/at86rf230.c b/drivers/net/ieee802154/at86rf230.c
index 9f10da60e02d..057025722e3d 100644
--- a/drivers/net/ieee802154/at86rf230.c
+++ b/drivers/net/ieee802154/at86rf230.c
@@ -990,7 +990,12 @@ at86rf23x_set_channel(struct at86rf230_local *lp, u8 page, u8 channel)
 }
 
 #define AT86RF2XX_MAX_ED_LEVELS 0xF
-static const s32 at86rf23x_ed_levels[AT86RF2XX_MAX_ED_LEVELS + 1] = {
+static const s32 at86rf233_ed_levels[AT86RF2XX_MAX_ED_LEVELS + 1] = {
+	-9400, -9200, -9000, -8800, -8600, -8400, -8200, -8000, -7800, -7600,
+	-7400, -7200, -7000, -6800, -6600, -6400,
+};
+
+static const s32 at86rf231_ed_levels[AT86RF2XX_MAX_ED_LEVELS + 1] = {
 	-9100, -8900, -8700, -8500, -8300, -8100, -7900, -7700, -7500, -7300,
 	-7100, -6900, -6700, -6500, -6300, -6100,
 };
@@ -1343,7 +1348,7 @@ static struct at86rf2xx_chip_data at86rf233_data = {
 	.t_sleep_to_off = 1000,
 	.t_frame = 4096,
 	.t_p_ack = 545,
-	.rssi_base_val = -91,
+	.rssi_base_val = -94,
 	.set_channel = at86rf23x_set_channel,
 	.set_txpower = at86rf23x_set_txpower,
 };
@@ -1557,9 +1562,6 @@ at86rf230_detect_device(struct at86rf230_local *lp)
 	lp->hw->phy->supported.cca_opts = BIT(NL802154_CCA_OPT_ENERGY_CARRIER_AND) |
 		BIT(NL802154_CCA_OPT_ENERGY_CARRIER_OR);
 
-	lp->hw->phy->supported.cca_ed_levels = at86rf23x_ed_levels;
-	lp->hw->phy->supported.cca_ed_levels_size = ARRAY_SIZE(at86rf23x_ed_levels);
-
 	lp->hw->phy->cca.mode = NL802154_CCA_ENERGY;
 
 	switch (part) {
@@ -1575,6 +1577,8 @@ at86rf230_detect_device(struct at86rf230_local *lp)
 		lp->hw->phy->symbol_duration = 16;
 		lp->hw->phy->supported.tx_powers = at86rf231_powers;
 		lp->hw->phy->supported.tx_powers_size = ARRAY_SIZE(at86rf231_powers);
+		lp->hw->phy->supported.cca_ed_levels = at86rf231_ed_levels;
+		lp->hw->phy->supported.cca_ed_levels_size = ARRAY_SIZE(at86rf231_ed_levels);
 		break;
 	case 7:
 		chip = "at86rf212";
@@ -1598,6 +1602,8 @@ at86rf230_detect_device(struct at86rf230_local *lp)
 		lp->hw->phy->symbol_duration = 16;
 		lp->hw->phy->supported.tx_powers = at86rf233_powers;
 		lp->hw->phy->supported.tx_powers_size = ARRAY_SIZE(at86rf233_powers);
+		lp->hw->phy->supported.cca_ed_levels = at86rf233_ed_levels;
+		lp->hw->phy->supported.cca_ed_levels_size = ARRAY_SIZE(at86rf233_ed_levels);
 		break;
 	default:
 		chip = "unknown";
diff --git a/drivers/net/ieee802154/fakelb.c b/drivers/net/ieee802154/fakelb.c
index ec387efb61d0..0d673f7682ee 100644
--- a/drivers/net/ieee802154/fakelb.c
+++ b/drivers/net/ieee802154/fakelb.c
@@ -218,7 +218,7 @@ static int fakelb_probe(struct platform_device *pdev)
 			goto err_slave;
 	}
 
-	dev_info(&pdev->dev, "added ieee802154 hardware\n");
+	dev_info(&pdev->dev, "added %i fake ieee802154 hardware devices\n", numlbs);
 	return 0;
 
 err_slave:
diff --git a/include/net/bluetooth/bluetooth.h b/include/net/bluetooth/bluetooth.h
index 0a1e21d7bce1..01487192f628 100644
--- a/include/net/bluetooth/bluetooth.h
+++ b/include/net/bluetooth/bluetooth.h
@@ -197,7 +197,7 @@ typedef struct {
 #define BDADDR_LE_PUBLIC	0x01
 #define BDADDR_LE_RANDOM	0x02
 
-static inline bool bdaddr_type_is_valid(__u8 type)
+static inline bool bdaddr_type_is_valid(u8 type)
 {
 	switch (type) {
 	case BDADDR_BREDR:
@@ -209,7 +209,7 @@ static inline bool bdaddr_type_is_valid(__u8 type)
 	return false;
 }
 
-static inline bool bdaddr_type_is_le(__u8 type)
+static inline bool bdaddr_type_is_le(u8 type)
 {
 	switch (type) {
 	case BDADDR_LE_PUBLIC:
@@ -279,15 +279,16 @@ struct sock *bt_accept_dequeue(struct sock *parent, struct socket *newsock);
 
 /* Skb helpers */
 struct l2cap_ctrl {
-	__u8	sframe:1,
+	u8	sframe:1,
 		poll:1,
 		final:1,
 		fcs:1,
 		sar:2,
 		super:2;
-	__u16	reqseq;
-	__u16	txseq;
-	__u8	retries;
+
+	u16	reqseq;
+	u16	txseq;
+	u8	retries;
 	__le16  psm;
 	bdaddr_t bdaddr;
 	struct l2cap_chan *chan;
@@ -303,7 +304,7 @@ typedef void (*hci_req_complete_skb_t)(struct hci_dev *hdev, u8 status,
 #define HCI_REQ_SKB	BIT(1)
 
 struct hci_ctrl {
-	__u16 opcode;
+	u16 opcode;
 	u8 req_flags;
 	u8 req_event;
 	union {
@@ -313,10 +314,10 @@ struct hci_ctrl {
 };
 
 struct bt_skb_cb {
-	__u8 pkt_type;
-	__u8 force_active;
-	__u16 expect;
-	__u8 incoming:1;
+	u8 pkt_type;
+	u8 force_active;
+	u16 expect;
+	u8 incoming:1;
 	union {
 		struct l2cap_ctrl l2cap;
 		struct hci_ctrl hci;
@@ -366,7 +367,7 @@ out:
 	return NULL;
 }
 
-int bt_to_errno(__u16 code);
+int bt_to_errno(u16 code);
 
 void hci_sock_set_flag(struct sock *sk, int nr);
 void hci_sock_clear_flag(struct sock *sk, int nr);
diff --git a/net/ieee802154/nl-phy.c b/net/ieee802154/nl-phy.c
index 77d73014bde3..dc2960be51e0 100644
--- a/net/ieee802154/nl-phy.c
+++ b/net/ieee802154/nl-phy.c
@@ -286,9 +286,12 @@ int ieee802154_del_iface(struct sk_buff *skb, struct genl_info *info)
 	if (name[nla_len(info->attrs[IEEE802154_ATTR_DEV_NAME]) - 1] != '\0')
 		return -EINVAL; /* name should be null-terminated */
 
+	rc = -ENODEV;
 	dev = dev_get_by_name(genl_info_net(info), name);
 	if (!dev)
-		return -ENODEV;
+		return rc;
+	if (dev->type != ARPHRD_IEEE802154)
+		goto out;
 
 	phy = dev->ieee802154_ptr->wpan_phy;
 	BUG_ON(!phy);
@@ -342,6 +345,7 @@ nla_put_failure:
 	nlmsg_free(msg);
 out_dev:
 	wpan_phy_put(phy);
+out:
 	if (dev)
 		dev_put(dev);