media: s5k4ecgx: Switch to GPIO descriptors

The driver has an option to pass in GPIO numbers from platform
data but this is not used in the kernel so delete this and the
whole platform data mechanism.

Get GPIO descriptors using the standard API and simplify the code,
gpiolib will handle any inversions.

Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Alim Akhtar <alim.akhtar@samsung.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Tommaso Merciai <tommaso.merciai@amarulasolutions.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

2 files changed, 25 insertions, 135 deletions

diff --git a/drivers/media/i2c/s5k4ecgx.c b/drivers/media/i2c/s5k4ecgx.c
index f266e848f52b..3caf14dcb6fa 100644
--- a/drivers/media/i2c/s5k4ecgx.c
+++ b/drivers/media/i2c/s5k4ecgx.c
@@ -15,7 +15,7 @@
 #include <linux/ctype.h>
 #include <linux/delay.h>
 #include <linux/firmware.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/i2c.h>
 #include <linux/module.h>
 #include <linux/regulator/consumer.h>
@@ -23,7 +23,6 @@
 #include <asm/unaligned.h>
 
 #include <media/media-entity.h>
-#include <media/i2c/s5k4ecgx.h>
 #include <media/v4l2-ctrls.h>
 #include <media/v4l2-device.h>
 #include <media/v4l2-mediabus.h>
@@ -171,12 +170,6 @@ static const char * const s5k4ecgx_supply_names[] = {
 
 #define S5K4ECGX_NUM_SUPPLIES ARRAY_SIZE(s5k4ecgx_supply_names)
 
-enum s5k4ecgx_gpio_id {
-	STBY,
-	RSET,
-	GPIO_NUM,
-};
-
 struct s5k4ecgx {
 	struct v4l2_subdev sd;
 	struct media_pad pad;
@@ -190,7 +183,8 @@ struct s5k4ecgx {
 	u8 set_params;
 
 	struct regulator_bulk_data supplies[S5K4ECGX_NUM_SUPPLIES];
-	struct s5k4ecgx_gpio gpio[GPIO_NUM];
+	struct gpio_desc *stby;
+	struct gpio_desc *reset;
 };
 
 static inline struct s5k4ecgx *to_s5k4ecgx(struct v4l2_subdev *sd)
@@ -454,15 +448,6 @@ static int s5k4ecgx_init_sensor(struct v4l2_subdev *sd)
 	return ret;
 }
 
-static int s5k4ecgx_gpio_set_value(struct s5k4ecgx *priv, int id, u32 val)
-{
-	if (!gpio_is_valid(priv->gpio[id].gpio))
-		return 0;
-	gpio_set_value(priv->gpio[id].gpio, val);
-
-	return 1;
-}
-
 static int __s5k4ecgx_power_on(struct s5k4ecgx *priv)
 {
 	int ret;
@@ -472,23 +457,20 @@ static int __s5k4ecgx_power_on(struct s5k4ecgx *priv)
 		return ret;
 	usleep_range(30, 50);
 
-	/* The polarity of STBY is controlled by TSP */
-	if (s5k4ecgx_gpio_set_value(priv, STBY, priv->gpio[STBY].level))
-		usleep_range(30, 50);
-
-	if (s5k4ecgx_gpio_set_value(priv, RSET, priv->gpio[RSET].level))
-		usleep_range(30, 50);
+	gpiod_set_value(priv->stby, 0);
+	usleep_range(30, 50);
+	gpiod_set_value(priv->reset, 0);
+	usleep_range(30, 50);
 
 	return 0;
 }
 
 static int __s5k4ecgx_power_off(struct s5k4ecgx *priv)
 {
-	if (s5k4ecgx_gpio_set_value(priv, RSET, !priv->gpio[RSET].level))
-		usleep_range(30, 50);
-
-	if (s5k4ecgx_gpio_set_value(priv, STBY, !priv->gpio[STBY].level))
-		usleep_range(30, 50);
+	gpiod_set_value(priv->reset, 1);
+	usleep_range(30, 50);
+	gpiod_set_value(priv->stby, 1);
+	usleep_range(30, 50);
 
 	priv->streaming = 0;
 
@@ -840,68 +822,6 @@ static const struct v4l2_subdev_ops s5k4ecgx_ops = {
 	.video = &s5k4ecgx_video_ops,
 };
 
-/*
- * GPIO setup
- */
-static int s5k4ecgx_config_gpio(int nr, int val, const char *name)
-{
-	unsigned long flags = val ? GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW;
-	int ret;
-
-	if (!gpio_is_valid(nr))
-		return 0;
-	ret = gpio_request_one(nr, flags, name);
-	if (!ret)
-		gpio_export(nr, 0);
-
-	return ret;
-}
-
-static void s5k4ecgx_free_gpios(struct s5k4ecgx *priv)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(priv->gpio); i++) {
-		if (!gpio_is_valid(priv->gpio[i].gpio))
-			continue;
-		gpio_free(priv->gpio[i].gpio);
-		priv->gpio[i].gpio = -EINVAL;
-	}
-}
-
-static int s5k4ecgx_config_gpios(struct s5k4ecgx *priv,
-				  const struct s5k4ecgx_platform_data *pdata)
-{
-	const struct s5k4ecgx_gpio *gpio = &pdata->gpio_stby;
-	int ret;
-
-	priv->gpio[STBY].gpio = -EINVAL;
-	priv->gpio[RSET].gpio  = -EINVAL;
-
-	ret = s5k4ecgx_config_gpio(gpio->gpio, gpio->level, "S5K4ECGX_STBY");
-
-	if (ret) {
-		s5k4ecgx_free_gpios(priv);
-		return ret;
-	}
-	priv->gpio[STBY] = *gpio;
-	if (gpio_is_valid(gpio->gpio))
-		gpio_set_value(gpio->gpio, 0);
-
-	gpio = &pdata->gpio_reset;
-
-	ret = s5k4ecgx_config_gpio(gpio->gpio, gpio->level, "S5K4ECGX_RST");
-	if (ret) {
-		s5k4ecgx_free_gpios(priv);
-		return ret;
-	}
-	priv->gpio[RSET] = *gpio;
-	if (gpio_is_valid(gpio->gpio))
-		gpio_set_value(gpio->gpio, 0);
-
-	return 0;
-}
-
 static int s5k4ecgx_init_v4l2_ctrls(struct s5k4ecgx *priv)
 {
 	const struct v4l2_ctrl_ops *ops = &s5k4ecgx_ctrl_ops;
@@ -964,11 +884,17 @@ static int s5k4ecgx_probe(struct i2c_client *client)
 	if (ret)
 		return ret;
 
-	ret = s5k4ecgx_config_gpios(priv, pdata);
-	if (ret) {
-		dev_err(&client->dev, "Failed to set gpios\n");
-		goto out_err1;
-	}
+	priv->stby = devm_gpiod_get(&client->dev, "standby", GPIOD_OUT_HIGH);
+	if (IS_ERR(priv->stby))
+		dev_err_probe(&client->dev, PTR_ERR(priv->stby),
+			      "failed to request gpio S5K4ECGX_STBY\n");
+	gpiod_set_consumer_name(priv->stby, "S5K4ECGX_STBY");
+	priv->reset = devm_gpiod_get(&client->dev, "reset", GPIOD_OUT_HIGH);
+	if (IS_ERR(priv->reset))
+		dev_err_probe(&client->dev, PTR_ERR(priv->reset),
+			      "failed to request gpio S5K4ECGX_RST\n");
+	gpiod_set_consumer_name(priv->reset, "S5K4ECGX_RST");
+
 	for (i = 0; i < S5K4ECGX_NUM_SUPPLIES; i++)
 		priv->supplies[i].supply = s5k4ecgx_supply_names[i];
 
@@ -976,20 +902,18 @@ static int s5k4ecgx_probe(struct i2c_client *client)
 				 priv->supplies);
 	if (ret) {
 		dev_err(&client->dev, "Failed to get regulators\n");
-		goto out_err2;
+		goto out_err;
 	}
 	ret = s5k4ecgx_init_v4l2_ctrls(priv);
 	if (ret)
-		goto out_err2;
+		goto out_err;
 
 	priv->curr_pixfmt = &s5k4ecgx_formats[0];
 	priv->curr_frmsize = &s5k4ecgx_prev_sizes[0];
 
 	return 0;
 
-out_err2:
-	s5k4ecgx_free_gpios(priv);
-out_err1:
+out_err:
 	media_entity_cleanup(&priv->sd.entity);
 
 	return ret;
@@ -1001,7 +925,6 @@ static void s5k4ecgx_remove(struct i2c_client *client)
 	struct s5k4ecgx *priv = to_s5k4ecgx(sd);
 
 	mutex_destroy(&priv->lock);
-	s5k4ecgx_free_gpios(priv);
 	v4l2_device_unregister_subdev(sd);
 	v4l2_ctrl_handler_free(&priv->handler);
 	media_entity_cleanup(&sd->entity);
diff --git a/include/media/i2c/s5k4ecgx.h b/include/media/i2c/s5k4ecgx.h
deleted file mode 100644
index 92202eb35249..000000000000
--- a/include/media/i2c/s5k4ecgx.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * S5K4ECGX image sensor header file
- *
- * Copyright (C) 2012, Linaro
- * Copyright (C) 2012, Samsung Electronics Co., Ltd.
- */
-
-#ifndef S5K4ECGX_H
-#define S5K4ECGX_H
-
-/**
- * struct s5k4ecgx_gpio - data structure describing a GPIO
- * @gpio: GPIO number
- * @level: indicates active state of the @gpio
- */
-struct s5k4ecgx_gpio {
-	int gpio;
-	int level;
-};
-
-/**
- * struct s5k4ecgx_platform_data - s5k4ecgx driver platform data
- * @gpio_reset:	 GPIO driving RESET pin
- * @gpio_stby:	 GPIO driving STBY pin
- */
-
-struct s5k4ecgx_platform_data {
-	struct s5k4ecgx_gpio gpio_reset;
-	struct s5k4ecgx_gpio gpio_stby;
-};
-
-#endif /* S5K4ECGX_H */