Merge tag 'at24-5.1-updates-for-wolfram' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into i2c/for-5.1

at24 updates for v5.1

- finally remove legacy platform data as all users have been switched
  to using device properties and nvmem notifier chain
- add support for the 'num-addresses' property

13 files changed, 130 insertions, 250 deletions

diff --git a/Documentation/devicetree/bindings/eeprom/at24.txt b/Documentation/devicetree/bindings/eeprom/at24.txt
index f9a7c984274c..0e456bbc1213 100644
--- a/Documentation/devicetree/bindings/eeprom/at24.txt
+++ b/Documentation/devicetree/bindings/eeprom/at24.txt
@@ -75,6 +75,8 @@ Optional properties:
 
   - address-width: number of address bits (one of 8, 16).
 
+  - num-addresses: total number of i2c slave addresses this device takes
+
 Example:
 
 eeprom@52 {
@@ -82,4 +84,5 @@ eeprom@52 {
 	reg = <0x52>;
 	pagesize = <32>;
 	wp-gpios = <&gpio1 3 0>;
+	num-addresses = <8>;
 };
diff --git a/MAINTAINERS b/MAINTAINERS
index 9919840d54cd..d901919dd475 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2503,7 +2503,6 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux.git
 S:	Maintained
 F:	Documentation/devicetree/bindings/eeprom/at24.txt
 F:	drivers/misc/eeprom/at24.c
-F:	include/linux/platform_data/at24.h
 
 ATA OVER ETHERNET (AOE) DRIVER
 M:	"Ed L. Cashin" <ed.cashin@acm.org>
diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c
index c4da635ee4ce..669b4ca3b9c2 100644
--- a/arch/arm/mach-davinci/board-da830-evm.c
+++ b/arch/arm/mach-davinci/board-da830-evm.c
@@ -18,7 +18,7 @@
 #include <linux/platform_device.h>
 #include <linux/i2c.h>
 #include <linux/platform_data/pcf857x.h>
-#include <linux/platform_data/at24.h>
+#include <linux/property.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/spi/spi.h>
@@ -457,12 +457,9 @@ static struct nvmem_cell_lookup da830_evm_nvmem_cell_lookup = {
 	.con_id		= "mac-address",
 };
 
-static struct at24_platform_data da830_evm_i2c_eeprom_info = {
-	.byte_len	= SZ_256K / 8,
-	.page_size	= 64,
-	.flags		= AT24_FLAG_ADDR16,
-	.setup		= davinci_get_mac_addr,
-	.context	= (void *)0x7f00,
+static const struct property_entry da830_evm_i2c_eeprom_properties[] = {
+	PROPERTY_ENTRY_U32("pagesize", 64),
+	{ }
 };
 
 static int __init da830_evm_ui_expander_setup(struct i2c_client *client,
@@ -496,7 +493,7 @@ static struct pcf857x_platform_data __initdata da830_evm_ui_expander_info = {
 static struct i2c_board_info __initdata da830_evm_i2c_devices[] = {
 	{
 		I2C_BOARD_INFO("24c256", 0x50),
-		.platform_data	= &da830_evm_i2c_eeprom_info,
+		.properties = da830_evm_i2c_eeprom_properties,
 	},
 	{
 		I2C_BOARD_INFO("tlv320aic3x", 0x18),
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index 44bca048dfd0..3490ed382716 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -150,32 +150,6 @@ static struct spi_board_info da850evm_spi_info[] = {
 	},
 };
 
-#ifdef CONFIG_MTD
-static void da850_evm_m25p80_notify_add(struct mtd_info *mtd)
-{
-	char *mac_addr = davinci_soc_info.emac_pdata->mac_addr;
-	size_t retlen;
-
-	if (!strcmp(mtd->name, "MAC-Address")) {
-		mtd_read(mtd, 0, ETH_ALEN, &retlen, mac_addr);
-		if (retlen == ETH_ALEN)
-			pr_info("Read MAC addr from SPI Flash: %pM\n",
-				mac_addr);
-	}
-}
-
-static struct mtd_notifier da850evm_spi_notifier = {
-	.add	= da850_evm_m25p80_notify_add,
-};
-
-static void da850_evm_setup_mac_addr(void)
-{
-	register_mtd_user(&da850evm_spi_notifier);
-}
-#else
-static void da850_evm_setup_mac_addr(void) { }
-#endif
-
 static struct mtd_partition da850_evm_norflash_partition[] = {
 	{
 		.name           = "bootloaders + env",
@@ -1494,8 +1468,6 @@ static __init void da850_evm_init(void)
 	if (ret)
 		pr_warn("%s: SATA registration failed: %d\n", __func__, ret);
 
-	da850_evm_setup_mac_addr();
-
 	ret = da8xx_register_rproc();
 	if (ret)
 		pr_warn("%s: dsp/rproc registration failed: %d\n",
diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
index e3b0b701e395..f21dc8d3b28c 100644
--- a/arch/arm/mach-davinci/board-dm365-evm.c
+++ b/arch/arm/mach-davinci/board-dm365-evm.c
@@ -18,7 +18,7 @@
 #include <linux/i2c.h>
 #include <linux/io.h>
 #include <linux/clk.h>
-#include <linux/platform_data/at24.h>
+#include <linux/property.h>
 #include <linux/leds.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
@@ -225,18 +225,15 @@ static struct nvmem_cell_lookup davinci_nvmem_cell_lookup = {
 	.con_id		= "mac-address",
 };
 
-static struct at24_platform_data eeprom_info = {
-	.byte_len       = (256*1024) / 8,
-	.page_size      = 64,
-	.flags          = AT24_FLAG_ADDR16,
-	.setup          = davinci_get_mac_addr,
-	.context	= (void *)0x7f00,
+static const struct property_entry eeprom_properties[] = {
+	PROPERTY_ENTRY_U32("pagesize", 64),
+	{ }
 };
 
 static struct i2c_board_info i2c_info[] = {
 	{
 		I2C_BOARD_INFO("24c256", 0x50),
-		.platform_data	= &eeprom_info,
+		.properties = eeprom_properties,
 	},
 	{
 		I2C_BOARD_INFO("tlv320aic3x", 0x18),
diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index b80c4ee76217..ecd30643c2c4 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -16,8 +16,8 @@
 #include <linux/gpio/machine.h>
 #include <linux/i2c.h>
 #include <linux/platform_data/pcf857x.h>
-#include <linux/platform_data/at24.h>
 #include <linux/platform_data/gpio-davinci.h>
+#include <linux/property.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/rawnand.h>
 #include <linux/mtd/partitions.h>
@@ -532,12 +532,9 @@ static struct nvmem_cell_lookup dm644evm_nvmem_cell_lookup = {
 	.con_id		= "mac-address",
 };
 
-static struct at24_platform_data eeprom_info = {
-	.byte_len	= (256*1024) / 8,
-	.page_size	= 64,
-	.flags		= AT24_FLAG_ADDR16,
-	.setup          = davinci_get_mac_addr,
-	.context	= (void *)0x7f00,
+static const struct property_entry eeprom_properties[] = {
+	PROPERTY_ENTRY_U32("pagesize", 64),
+	{ }
 };
 
 /*
@@ -647,7 +644,7 @@ static struct i2c_board_info __initdata i2c_info[] =  {
 	},
 	{
 		I2C_BOARD_INFO("24c256", 0x50),
-		.platform_data	= &eeprom_info,
+		.properties = eeprom_properties,
 	},
 	{
 		I2C_BOARD_INFO("tlv320aic33", 0x1b),
diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
index 8d5be6dd2019..02b57face113 100644
--- a/arch/arm/mach-davinci/board-dm646x-evm.c
+++ b/arch/arm/mach-davinci/board-dm646x-evm.c
@@ -22,7 +22,7 @@
 #include <linux/gpio.h>
 #include <linux/platform_device.h>
 #include <linux/i2c.h>
-#include <linux/platform_data/at24.h>
+#include <linux/property.h>
 #include <linux/platform_data/pcf857x.h>
 #include <linux/platform_data/ti-aemif.h>
 
@@ -364,12 +364,9 @@ static struct nvmem_cell_lookup dm646x_evm_nvmem_cell_lookup = {
 	.con_id		= "mac-address",
 };
 
-static struct at24_platform_data eeprom_info = {
-	.byte_len       = (256*1024) / 8,
-	.page_size      = 64,
-	.flags          = AT24_FLAG_ADDR16,
-	.setup          = davinci_get_mac_addr,
-	.context	= (void *)0x7f00,
+static const struct property_entry eeprom_properties[] = {
+	PROPERTY_ENTRY_U32("pagesize", 64),
+	{ }
 };
 #endif
 
@@ -440,7 +437,7 @@ static void evm_init_cpld(void)
 static struct i2c_board_info __initdata i2c_info[] =  {
 	{
 		I2C_BOARD_INFO("24c256", 0x50),
-		.platform_data  = &eeprom_info,
+		.properties  = eeprom_properties,
 	},
 	{
 		I2C_BOARD_INFO("pcf8574a", 0x38),
diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c
index 8df16e81b69e..a381b26328d8 100644
--- a/arch/arm/mach-davinci/board-mityomapl138.c
+++ b/arch/arm/mach-davinci/board-mityomapl138.c
@@ -14,11 +14,13 @@
 #include <linux/init.h>
 #include <linux/console.h>
 #include <linux/platform_device.h>
+#include <linux/property.h>
 #include <linux/mtd/partitions.h>
+#include <linux/notifier.h>
+#include <linux/nvmem-consumer.h>
 #include <linux/nvmem-provider.h>
 #include <linux/regulator/machine.h>
 #include <linux/i2c.h>
-#include <linux/platform_data/at24.h>
 #include <linux/etherdevice.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
@@ -117,11 +119,15 @@ static void mityomapl138_cpufreq_init(const char *partnum)
 static void mityomapl138_cpufreq_init(const char *partnum) { }
 #endif
 
-static void read_factory_config(struct nvmem_device *nvmem, void *context)
+static int read_factory_config(struct notifier_block *nb,
+			       unsigned long event, void *data)
 {
 	int ret;
 	const char *partnum = NULL;
-	struct davinci_soc_info *soc_info = &davinci_soc_info;
+	struct nvmem_device *nvmem = data;
+
+	if (strcmp(nvmem_dev_name(nvmem), "1-00500") != 0)
+		return NOTIFY_DONE;
 
 	if (!IS_BUILTIN(CONFIG_NVMEM)) {
 		pr_warn("Factory Config not available without CONFIG_NVMEM\n");
@@ -147,21 +153,20 @@ static void read_factory_config(struct nvmem_device *nvmem, void *context)
 		goto bad_config;
 	}
 
-	pr_info("Found MAC = %pM\n", factory_config.mac);
-	if (is_valid_ether_addr(factory_config.mac))
-		memcpy(soc_info->emac_pdata->mac_addr,
-			factory_config.mac, ETH_ALEN);
-	else
-		pr_warn("Invalid MAC found in factory config block\n");
-
 	partnum = factory_config.partnum;
 	pr_info("Part Number = %s\n", partnum);
 
 bad_config:
 	/* default maximum speed is valid for all platforms */
 	mityomapl138_cpufreq_init(partnum);
+
+	return NOTIFY_STOP;
 }
 
+static struct notifier_block mityomapl138_nvmem_notifier = {
+	.notifier_call = read_factory_config,
+};
+
 /*
  * We don't define a cell for factory config as it will be accessed from the
  * board file using the nvmem notifier chain.
@@ -187,12 +192,10 @@ static struct nvmem_cell_lookup mityomapl138_nvmem_cell_lookup = {
 	.con_id		= "mac-address",
 };
 
-static struct at24_platform_data mityomapl138_fd_chip = {
-	.byte_len	= 256,
-	.page_size	= 8,
-	.flags		= AT24_FLAG_READONLY | AT24_FLAG_IRUGO,
-	.setup		= read_factory_config,
-	.context	= NULL,
+static const struct property_entry mityomapl138_fd_chip_properties[] = {
+	PROPERTY_ENTRY_U32("pagesize", 8),
+	PROPERTY_ENTRY_BOOL("read-only"),
+	{ }
 };
 
 static struct davinci_i2c_platform_data mityomap_i2c_0_pdata = {
@@ -321,7 +324,7 @@ static struct i2c_board_info __initdata mityomap_tps65023_info[] = {
 	},
 	{
 		I2C_BOARD_INFO("24c02", 0x50),
-		.platform_data = &mityomapl138_fd_chip,
+		.properties = mityomapl138_fd_chip_properties,
 	},
 };
 
@@ -569,6 +572,7 @@ static void __init mityomapl138_init(void)
 
 	davinci_serial_init(da8xx_serial_device);
 
+	nvmem_register_notifier(&mityomapl138_nvmem_notifier);
 	nvmem_add_cell_table(&mityomapl138_nvmem_cell_table);
 	nvmem_add_cell_lookups(&mityomapl138_nvmem_cell_lookup, 1);
 
diff --git a/arch/arm/mach-davinci/board-sffsdr.c b/arch/arm/mach-davinci/board-sffsdr.c
index 792bb84d5011..ff14de1396c8 100644
--- a/arch/arm/mach-davinci/board-sffsdr.c
+++ b/arch/arm/mach-davinci/board-sffsdr.c
@@ -26,7 +26,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/i2c.h>
-#include <linux/platform_data/at24.h>
+#include <linux/property.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/rawnand.h>
 #include <linux/mtd/partitions.h>
@@ -92,16 +92,15 @@ static struct platform_device davinci_sffsdr_nandflash_device = {
 	.resource	= davinci_sffsdr_nandflash_resource,
 };
 
-static struct at24_platform_data eeprom_info = {
-	.byte_len	= (64*1024) / 8,
-	.page_size	= 32,
-	.flags		= AT24_FLAG_ADDR16,
+static const struct property_entry eeprom_properties[] = {
+	PROPERTY_ENTRY_U32("pagesize", 32),
+	{ }
 };
 
 static struct i2c_board_info __initdata i2c_info[] =  {
 	{
-		I2C_BOARD_INFO("24lc64", 0x50),
-		.platform_data	= &eeprom_info,
+		I2C_BOARD_INFO("24c64", 0x50),
+		.properties = eeprom_properties,
 	},
 	/* Other I2C devices:
 	 * MSP430,  addr 0x23 (not used)
diff --git a/arch/arm/mach-davinci/common.c b/arch/arm/mach-davinci/common.c
index e1d0f0d841ff..0c638fe15dcb 100644
--- a/arch/arm/mach-davinci/common.c
+++ b/arch/arm/mach-davinci/common.c
@@ -26,21 +26,6 @@ EXPORT_SYMBOL(davinci_soc_info);
 void __iomem *davinci_intc_base;
 int davinci_intc_type;
 
-void davinci_get_mac_addr(struct nvmem_device *nvmem, void *context)
-{
-	char *mac_addr = davinci_soc_info.emac_pdata->mac_addr;
-	off_t offset = (off_t)context;
-
-	if (!IS_BUILTIN(CONFIG_NVMEM)) {
-		pr_warn("Cannot read MAC addr from EEPROM without CONFIG_NVMEM\n");
-		return;
-	}
-
-	/* Read MAC addr from EEPROM */
-	if (nvmem_device_read(nvmem, offset, ETH_ALEN, mac_addr) == ETH_ALEN)
-		pr_info("Read MAC addr from EEPROM: %pM\n", mac_addr);
-}
-
 static int __init davinci_init_id(struct davinci_soc_info *soc_info)
 {
 	int			i;
diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c
index ddfcf4ade7bf..63aa541c9608 100644
--- a/drivers/misc/eeprom/at24.c
+++ b/drivers/misc/eeprom/at24.c
@@ -22,10 +22,24 @@
 #include <linux/i2c.h>
 #include <linux/nvmem-provider.h>
 #include <linux/regmap.h>
-#include <linux/platform_data/at24.h>
 #include <linux/pm_runtime.h>
 #include <linux/gpio/consumer.h>
 
+/* Address pointer is 16 bit. */
+#define AT24_FLAG_ADDR16	BIT(7)
+/* sysfs-entry will be read-only. */
+#define AT24_FLAG_READONLY	BIT(6)
+/* sysfs-entry will be world-readable. */
+#define AT24_FLAG_IRUGO		BIT(5)
+/* Take always 8 addresses (24c00). */
+#define AT24_FLAG_TAKE8ADDR	BIT(4)
+/* Factory-programmed serial number. */
+#define AT24_FLAG_SERIAL	BIT(3)
+/* Factory-programmed mac address. */
+#define AT24_FLAG_MAC		BIT(2)
+/* Does not auto-rollover reads to the next slave address. */
+#define AT24_FLAG_NO_RDROL	BIT(1)
+
 /*
  * I2C EEPROMs from most vendors are inexpensive and mostly interchangeable.
  * Differences between different vendor product lines (like Atmel AT24C or
@@ -107,10 +121,6 @@ module_param_named(write_timeout, at24_write_timeout, uint, 0);
 MODULE_PARM_DESC(at24_write_timeout, "Time (in ms) to try writes (default 25)");
 
 struct at24_chip_data {
-	/*
-	 * these fields mirror their equivalents in
-	 * struct at24_platform_data
-	 */
 	u32 byte_len;
 	u8 flags;
 };
@@ -471,63 +481,11 @@ static int at24_write(void *priv, unsigned int off, void *val, size_t count)
 	return 0;
 }
 
-static void at24_properties_to_pdata(struct device *dev,
-				     struct at24_platform_data *chip)
-{
-	int err;
-	u32 val;
-
-	if (device_property_present(dev, "read-only"))
-		chip->flags |= AT24_FLAG_READONLY;
-	if (device_property_present(dev, "no-read-rollover"))
-		chip->flags |= AT24_FLAG_NO_RDROL;
-
-	err = device_property_read_u32(dev, "address-width", &val);
-	if (!err) {
-		switch (val) {
-		case 8:
-			if (chip->flags & AT24_FLAG_ADDR16)
-				dev_warn(dev, "Override address width to be 8, while default is 16\n");
-			chip->flags &= ~AT24_FLAG_ADDR16;
-			break;
-		case 16:
-			chip->flags |= AT24_FLAG_ADDR16;
-			break;
-		default:
-			dev_warn(dev, "Bad \"address-width\" property: %u\n",
-				 val);
-		}
-	}
-
-	err = device_property_read_u32(dev, "size", &val);
-	if (!err)
-		chip->byte_len = val;
-
-	err = device_property_read_u32(dev, "pagesize", &val);
-	if (!err) {
-		chip->page_size = val;
-	} else {
-		/*
-		 * This is slow, but we can't know all eeproms, so we better
-		 * play safe. Specifying custom eeprom-types via platform_data
-		 * is recommended anyhow.
-		 */
-		chip->page_size = 1;
-	}
-}
-
-static int at24_get_pdata(struct device *dev, struct at24_platform_data *pdata)
+static const struct at24_chip_data *at24_get_chip_data(struct device *dev)
 {
 	struct device_node *of_node = dev->of_node;
 	const struct at24_chip_data *cdata;
 	const struct i2c_device_id *id;
-	struct at24_platform_data *pd;
-
-	pd = dev_get_platdata(dev);
-	if (pd) {
-		memcpy(pdata, pd, sizeof(*pdata));
-		return 0;
-	}
 
 	id = i2c_match_id(at24_ids, to_i2c_client(dev));
 
@@ -544,13 +502,9 @@ static int at24_get_pdata(struct device *dev, struct at24_platform_data *pdata)
 		cdata = acpi_device_get_match_data(dev);
 
 	if (!cdata)
-		return -ENODEV;
+		return ERR_PTR(-ENODEV);
 
-	pdata->byte_len = cdata->byte_len;
-	pdata->flags = cdata->flags;
-	at24_properties_to_pdata(dev, pdata);
-
-	return 0;
+	return cdata;
 }
 
 static void at24_remove_dummy_clients(struct at24_data *at24)
@@ -619,7 +573,8 @@ static int at24_probe(struct i2c_client *client)
 {
 	struct regmap_config regmap_config = { };
 	struct nvmem_config nvmem_config = { };
-	struct at24_platform_data pdata = { };
+	u32 byte_len, page_size, flags, addrw;
+	const struct at24_chip_data *cdata;
 	struct device *dev = &client->dev;
 	bool i2c_fn_i2c, i2c_fn_block;
 	unsigned int i, num_addresses;
@@ -634,35 +589,75 @@ static int at24_probe(struct i2c_client *client)
 	i2c_fn_block = i2c_check_functionality(client->adapter,
 					       I2C_FUNC_SMBUS_WRITE_I2C_BLOCK);
 
-	err = at24_get_pdata(dev, &pdata);
+	cdata = at24_get_chip_data(dev);
+	if (IS_ERR(cdata))
+		return PTR_ERR(cdata);
+
+	err = device_property_read_u32(dev, "pagesize", &page_size);
+	if (err)
+		/*
+		 * This is slow, but we can't know all eeproms, so we better
+		 * play safe. Specifying custom eeprom-types via platform_data
+		 * is recommended anyhow.
+		 */
+		page_size = 1;
+
+	flags = cdata->flags;
+	if (device_property_present(dev, "read-only"))
+		flags |= AT24_FLAG_READONLY;
+	if (device_property_present(dev, "no-read-rollover"))
+		flags |= AT24_FLAG_NO_RDROL;
+
+	err = device_property_read_u32(dev, "address-width", &addrw);
+	if (!err) {
+		switch (addrw) {
+		case 8:
+			if (flags & AT24_FLAG_ADDR16)
+				dev_warn(dev,
+					 "Override address width to be 8, while default is 16\n");
+			flags &= ~AT24_FLAG_ADDR16;
+			break;
+		case 16:
+			flags |= AT24_FLAG_ADDR16;
+			break;
+		default:
+			dev_warn(dev, "Bad \"address-width\" property: %u\n",
+				 addrw);
+		}
+	}
+
+	err = device_property_read_u32(dev, "size", &byte_len);
 	if (err)
-		return err;
+		byte_len = cdata->byte_len;
 
 	if (!i2c_fn_i2c && !i2c_fn_block)
-		pdata.page_size = 1;
+		page_size = 1;
 
-	if (!pdata.page_size) {
+	if (!page_size) {
 		dev_err(dev, "page_size must not be 0!\n");
 		return -EINVAL;
 	}
 
-	if (!is_power_of_2(pdata.page_size))
+	if (!is_power_of_2(page_size))
 		dev_warn(dev, "page_size looks suspicious (no power of 2)!\n");
 
-	if (pdata.flags & AT24_FLAG_TAKE8ADDR)
-		num_addresses = 8;
-	else
-		num_addresses =	DIV_ROUND_UP(pdata.byte_len,
-			(pdata.flags & AT24_FLAG_ADDR16) ? 65536 : 256);
+	err = device_property_read_u32(dev, "num-addresses", &num_addresses);
+	if (err) {
+		if (flags & AT24_FLAG_TAKE8ADDR)
+			num_addresses = 8;
+		else
+			num_addresses =	DIV_ROUND_UP(byte_len,
+				(flags & AT24_FLAG_ADDR16) ? 65536 : 256);
+	}
 
-	if ((pdata.flags & AT24_FLAG_SERIAL) && (pdata.flags & AT24_FLAG_MAC)) {
+	if ((flags & AT24_FLAG_SERIAL) && (flags & AT24_FLAG_MAC)) {
 		dev_err(dev,
 			"invalid device data - cannot have both AT24_FLAG_SERIAL & AT24_FLAG_MAC.");
 		return -EINVAL;
 	}
 
 	regmap_config.val_bits = 8;
-	regmap_config.reg_bits = (pdata.flags & AT24_FLAG_ADDR16) ? 16 : 8;
+	regmap_config.reg_bits = (flags & AT24_FLAG_ADDR16) ? 16 : 8;
 	regmap_config.disable_locking = true;
 
 	regmap = devm_regmap_init_i2c(client, &regmap_config);
@@ -675,11 +670,11 @@ static int at24_probe(struct i2c_client *client)
 		return -ENOMEM;
 
 	mutex_init(&at24->lock);
-	at24->byte_len = pdata.byte_len;
-	at24->page_size = pdata.page_size;
-	at24->flags = pdata.flags;
+	at24->byte_len = byte_len;
+	at24->page_size = page_size;
+	at24->flags = flags;
 	at24->num_addresses = num_addresses;
-	at24->offset_adj = at24_get_offset_adj(pdata.flags, pdata.byte_len);
+	at24->offset_adj = at24_get_offset_adj(flags, byte_len);
 	at24->client[0].client = client;
 	at24->client[0].regmap = regmap;
 
@@ -687,10 +682,10 @@ static int at24_probe(struct i2c_client *client)
 	if (IS_ERR(at24->wp_gpio))
 		return PTR_ERR(at24->wp_gpio);
 
-	writable = !(pdata.flags & AT24_FLAG_READONLY);
+	writable = !(flags & AT24_FLAG_READONLY);
 	if (writable) {
 		at24->write_max = min_t(unsigned int,
-					pdata.page_size, at24_io_limit);
+					page_size, at24_io_limit);
 		if (!i2c_fn_i2c && at24->write_max > I2C_SMBUS_BLOCK_MAX)
 			at24->write_max = I2C_SMBUS_BLOCK_MAX;
 	}
@@ -733,7 +728,7 @@ static int at24_probe(struct i2c_client *client)
 	nvmem_config.priv = at24;
 	nvmem_config.stride = 1;
 	nvmem_config.word_size = 1;
-	nvmem_config.size = pdata.byte_len;
+	nvmem_config.size = byte_len;
 
 	at24->nvmem = devm_nvmem_register(dev, &nvmem_config);
 	if (IS_ERR(at24->nvmem)) {
@@ -742,13 +737,9 @@ static int at24_probe(struct i2c_client *client)
 	}
 
 	dev_info(dev, "%u byte %s EEPROM, %s, %u bytes/write\n",
-		 pdata.byte_len, client->name,
+		 byte_len, client->name,
 		 writable ? "writable" : "read-only", at24->write_max);
 
-	/* export data to kernel code */
-	if (pdata.setup)
-		pdata.setup(at24->nvmem, pdata.context);
-
 	return 0;
 
 err_clients:
diff --git a/include/linux/davinci_emac.h b/include/linux/davinci_emac.h
index 05b97144d342..28e6cf1356da 100644
--- a/include/linux/davinci_emac.h
+++ b/include/linux/davinci_emac.h
@@ -46,5 +46,4 @@ enum {
 	EMAC_VERSION_2,	/* DM646x */
 };
 
-void davinci_get_mac_addr(struct nvmem_device *nvmem, void *context);
 #endif
diff --git a/include/linux/platform_data/at24.h b/include/linux/platform_data/at24.h
deleted file mode 100644
index 63507ff464ee..000000000000
--- a/include/linux/platform_data/at24.h
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * at24.h - platform_data for the at24 (generic eeprom) driver
- * (C) Copyright 2008 by Pengutronix
- * (C) Copyright 2012 by Wolfram Sang
- * same license as the driver
- */
-
-#ifndef _LINUX_AT24_H
-#define _LINUX_AT24_H
-
-#include <linux/types.h>
-#include <linux/nvmem-consumer.h>
-#include <linux/bitops.h>
-
-/**
- * struct at24_platform_data - data to set up at24 (generic eeprom) driver
- * @byte_len: size of eeprom in byte
- * @page_size: number of byte which can be written in one go
- * @flags: tunable options, check AT24_FLAG_* defines
- * @setup: an optional callback invoked after eeprom is probed; enables kernel
-	code to access eeprom via nvmem, see example
- * @context: optional parameter passed to setup()
- *
- * If you set up a custom eeprom type, please double-check the parameters.
- * Especially page_size needs extra care, as you risk data loss if your value
- * is bigger than what the chip actually supports!
- *
- * An example in pseudo code for a setup() callback:
- *
- * void get_mac_addr(struct nvmem_device *nvmem, void *context)
- * {
- *	u8 *mac_addr = ethernet_pdata->mac_addr;
- *	off_t offset = context;
- *
- *	// Read MAC addr from EEPROM
- *	if (nvmem_device_read(nvmem, offset, ETH_ALEN, mac_addr) == ETH_ALEN)
- *		pr_info("Read MAC addr from EEPROM: %pM\n", mac_addr);
- * }
- *
- * This function pointer and context can now be set up in at24_platform_data.
- */
-
-struct at24_platform_data {
-	u32		byte_len;		/* size (sum of all addr) */
-	u16		page_size;		/* for writes */
-	u8		flags;
-#define AT24_FLAG_ADDR16	BIT(7)	/* address pointer is 16 bit */
-#define AT24_FLAG_READONLY	BIT(6)	/* sysfs-entry will be read-only */
-#define AT24_FLAG_IRUGO		BIT(5)	/* sysfs-entry will be world-readable */
-#define AT24_FLAG_TAKE8ADDR	BIT(4)	/* take always 8 addresses (24c00) */
-#define AT24_FLAG_SERIAL	BIT(3)	/* factory-programmed serial number */
-#define AT24_FLAG_MAC		BIT(2)	/* factory-programmed mac address */
-#define AT24_FLAG_NO_RDROL	BIT(1)	/* does not auto-rollover reads to */
-					/* the next slave address */
-
-	void		(*setup)(struct nvmem_device *nvmem, void *context);
-	void		*context;
-};
-
-#endif /* _LINUX_AT24_H */