diff options
| author | Arnd Bergmann <arnd@arndb.de> | 2022-11-29 21:16:46 +0100 |
|---|---|---|
| committer | Arnd Bergmann <arnd@arndb.de> | 2022-11-30 15:01:31 +0100 |
| commit | bcbc46852835a64d002093424faf5111bce8864a (patch) | |
| tree | db4ee4cf1f99abf3047ee19ead7d9e5679338f79 | |
| parent | 0c5f21291c1ed0d57c868d16bcd32acf1a5fea93 (diff) | |
| parent | afcd946be11c937ed400b1d4727e2b5fe04ba693 (diff) | |
| download | linux-bcbc46852835a64d002093424faf5111bce8864a.tar.bz2 | |
Merge tag 'qcom-arm64-for-6.2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm ARM64 DTS updates for 6.2
This introduces support for SM4250, SM6115, SM6375 and SDM670 platforms
and Sony Xperia 10 IV, Google Pixel 3a, OnePlus 3, OnePlus 3T, Google
Pazquel and OnePlus Nord N100.
A wide variety of updates to align with DeviceTree bindings across
many/most platforms is introduced, and incorrectly styled comments are
adjusted across the tree.
Apps RSC is added to the cluster-idle power-domain across SM8150,
SM8250, SM8350 and SM8450, to ensure sleep and wake votes are flushed as
the last core is being powered down.
Remoteproc firmware patches are aligned with agreed upon structure used
in linux-firmware across Inforce 6560, Lenovo Miix 630, various Sony
Xperia devices and Samsung Galaxy Book2 (although these are not
available in linux-firmware today).
On IPQ8074 CPU clocks are added, thermal zones are introduced and vqmmc
supply is specified for the HK01 board.
Alcatel OneTouch Idol 3 gains LED nodes and Samsung Galaxy A3U gained
vibrator support.
The application subsystem's IOMMU and the display subsystem is enabled
for MSM8953.
A new CPU frequency table is introduced for MSM8996Pro, to properly
describe it separate of MSM8996. The GPU opp-table is extended as well.
On SC7180 USB is marked as a wakeup source, USB gains required-opps to
ensure that the core voltage rail is voted for as needed. The
description of the fingerprint sensor in Trogdor is corrected.
On SC7280 Wake-on-WLAN is introduced, and PHY parameters for the SNPS
USB PHY is defined across SC7280.
The memory map across Google Herobrine is adjusted, to regain unused
memory on the WiFi SKUs. A LTE SKU of the Evoker board is introduced
and the bard gains touchscreen.
NVME support is disabled on Villager boards, as it's not used.
PCIe support is introduced on SC8280XP, with NVMe, SDX55 (5G) and WiFi
enabled on the Lenovo Thinkpad X13s and Compute Reference Device. ADCs
and thermal zones are intrduced for the same. Lenovo Thinkpad X13s
gains LID switch support.
Fairphone FP3 gains touchscreen support.
Support for Xiaomi Poco F1 variant with EBBG panel.
The round-robin ADC is enabled across DB845c, OnePlus devices and
Pocophone F1 devices.
The displayport controller on SDM845 is introduced.
SM6350 gains SDHCI support and on Sony Xperia 10 III sd-card,
touchscreen and GPI DMA is enabled.
Fairphone FP4 got SD-card support.
UFS PHY register ranges are corrected across SM8150, SM8250, SM8350 and
SM8450.
Sony Xperia 1 II got NFC support and Sony Xperia 5 III got PMIC
regulators defined and USB definition corrected, to enable USB3.
The SDHCI controller is described for SM8450 and microSD support is
enabled for the HDK and QRD devices.
SM8450 also gains camera CCI interface and display clock controller.
* tag 'qcom-arm64-for-6.2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (261 commits)
arm64: dts: qcom: sdm845-polaris: Don't duplicate DMA assignment
arm64: dts: qcom: sm8350-sagami: Wire up USB regulators and fix USB3
arm64: dts: qcom: sm8350-sagami: Add most RPMh regulators
arm64: dts: qcom: sc7280: Make herobrine-audio-rt5682 mic dtsi's match more
arm64: dts: qcom: trim addresses to 8 digits
arm64: dts: msm8998: unify PCIe clock order withMSM8996
arm64: dts: msm8998: add MSM8998 specific compatible
arm64: dts: qcom: sc8280xp-x13s: enable WiFi controller
arm64: dts: qcom: sc8280xp-x13s: enable modem
arm64: dts: qcom: sc8280xp-x13s: enable NVMe SSD
arm64: dts: qcom: sc8280xp-crd: enable WiFi controller
arm64: dts: qcom: sc8280xp-crd: enable SDX55 modem
arm64: dts: qcom: sc8280xp-crd: enable NVMe SSD
arm64: dts: qcom: sc8280xp-crd: rename backlight and misc regulators
arm64: dts: qcom: sa8295p-adp: enable PCIe
arm64: dts: qcom: sc8280xp/sa8540p: add PCIe2-4 nodes
arm64: dts: qcom: add sdm670 and pixel 3a device trees
arm64: dts: qcom: sc7280: Add Google Herobrine WIFI SKU dts fragment
arm64: dts: qcom: sc7280: Mark all Qualcomm reference boards as LTE
arm64: dts: qcom: sm7225-fairphone-fp4: Enable SD card
...
Link: https://lore.kernel.org/r/20221124100650.1982448-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
175 files changed, 12538 insertions, 3719 deletions
diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml index 5c13b73e4d57..b2058345bb8e 100644 --- a/Documentation/devicetree/bindings/arm/cpus.yaml +++ b/Documentation/devicetree/bindings/arm/cpus.yaml @@ -183,6 +183,7 @@ properties: - qcom,kryo485 - qcom,kryo560 - qcom,kryo570 + - qcom,kryo660 - qcom,kryo685 - qcom,kryo780 - qcom,scorpion diff --git a/Documentation/devicetree/bindings/arm/qcom-soc.yaml b/Documentation/devicetree/bindings/arm/qcom-soc.yaml new file mode 100644 index 000000000000..e333ec4a9c5f --- /dev/null +++ b/Documentation/devicetree/bindings/arm/qcom-soc.yaml @@ -0,0 +1,66 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/qcom-soc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SoC compatibles naming convention + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + +description: | + Guidelines for new compatibles for SoC blocks/components. + When adding new compatibles in new bindings, use the format:: + qcom,SoC-IP + + For example:: + qcom,sdm845-llcc-bwmon + + When adding new compatibles to existing bindings, use the format in the + existing binding, even if it contradicts the above. + +select: + properties: + compatible: + pattern: "^qcom,.*(apq|ipq|mdm|msm|qcm|qcs|sa|sc|sdm|sdx|sm)[0-9]+.*$" + required: + - compatible + +properties: + compatible: + oneOf: + # Preferred naming style for compatibles of SoC components: + - pattern: "^qcom,(apq|ipq|mdm|msm|qcm|qcs|sa|sc|sdm|sdx|sm)[0-9]+-.*$" + - pattern: "^qcom,(sa|sc)8[0-9]+[a-z][a-z]?-.*$" + + # Legacy namings - variations of existing patterns/compatibles are OK, + # but do not add completely new entries to these: + - pattern: "^qcom,[ak]pss-wdt-(apq|ipq|mdm|msm|qcm|qcs|sa|sc|sdm|sdx|sm)[0-9]+.*$" + - pattern: "^qcom,gcc-(apq|ipq|mdm|msm|qcm|qcs|sa|sc|sdm|sdx|sm)[0-9]+.*$" + - pattern: "^qcom,mmcc-(apq|ipq|mdm|msm|qcm|qcs|sa|sc|sdm|sdx|sm)[0-9]+.*$" + - pattern: "^qcom,pcie-(apq|ipq|mdm|msm|qcm|qcs|sa|sc|sdm|sdx|sm)[0-9]+.*$" + - pattern: "^qcom,rpm-(apq|ipq|mdm|msm|qcm|qcs|sa|sc|sdm|sdx|sm)[0-9]+.*$" + - pattern: "^qcom,scm-(apq|ipq|mdm|msm|qcm|qcs|sa|sc|sdm|sdx|sm)[0-9]+.*$" + - enum: + - qcom,dsi-ctrl-6g-qcm2290 + - qcom,gpucc-sdm630 + - qcom,gpucc-sdm660 + - qcom,lcc-apq8064 + - qcom,lcc-ipq8064 + - qcom,lcc-mdm9615 + - qcom,lcc-msm8960 + - qcom,lpass-cpu-apq8016 + - qcom,usb-ss-ipq4019-phy + - qcom,usb-hs-ipq4019-phy + - qcom,vqmmc-ipq4019-regulator + + # Legacy compatibles with wild-cards - list cannot grow with new bindings: + - enum: + - qcom,ipq806x-gmac + - qcom,ipq806x-nand + - qcom,ipq806x-sata-phy + - qcom,ipq806x-usb-phy-ss + - qcom,ipq806x-usb-phy-hs + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml index 1b5ac6b02bc5..5facc588f7a6 100644 --- a/Documentation/devicetree/bindings/arm/qcom.yaml +++ b/Documentation/devicetree/bindings/arm/qcom.yaml @@ -54,6 +54,8 @@ description: | sdm845 sdx55 sdx65 + sm4250 + sm6115 sm6125 sm6350 sm7225 @@ -221,13 +223,20 @@ properties: - items: - enum: + - oneplus,oneplus3 + - oneplus,oneplus3t - qcom,msm8996-mtp - sony,dora-row - sony,kagura-row - sony,keyaki-row - xiaomi,gemini + - const: qcom,msm8996 + + - items: + - enum: - xiaomi,natrium - xiaomi,scorpio + - const: qcom,msm8996pro - const: qcom,msm8996 - items: @@ -463,6 +472,17 @@ properties: - const: google,pazquel-sku2 - const: qcom,sc7180 + - description: Google Pazquel360 with LTE (newest rev) + items: + - const: google,pazquel-sku22 + - const: google,pazquel-sku20 + - const: qcom,sc7180 + + - description: Google Pazquel360 with WiFi (newest rev) + items: + - const: google,pazquel-sku21 + - const: qcom,sc7180 + - description: Sharp Dynabook Chromebook C1 (rev1) items: - const: google,pompom-rev1 @@ -674,6 +694,9 @@ properties: - items: - enum: + - google,cheza + - google,cheza-rev1 + - google,cheza-rev2 - lenovo,yoga-c630 - lg,judyln - lg,judyp @@ -681,17 +704,24 @@ properties: - oneplus,fajita - qcom,sdm845-mtp - shift,axolotl + - samsung,starqltechn - samsung,w737 - sony,akari-row - sony,akatsuki-row - sony,apollo-row - thundercomm,db845c - xiaomi,beryllium + - xiaomi,beryllium-ebbg - xiaomi,polaris - const: qcom,sdm845 - items: - enum: + - oneplus,billie2 + - const: qcom,sm4250 + + - items: + - enum: - sony,pdx201 - const: qcom,sm6125 diff --git a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml index 6a3e3ede1ede..a5edab6f2e40 100644 --- a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml +++ b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml @@ -33,6 +33,7 @@ properties: compatible: items: - enum: + - qcom,pm6125 - qcom,pm6150 - qcom,pm6150l - qcom,pm6350 diff --git a/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml b/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml index feb390d50696..d20569b9b763 100644 --- a/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml +++ b/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml @@ -222,8 +222,8 @@ examples: qcom,hw-settle-time = <200>; }; - conn-therm@47 { - reg = <PM8350_ADC7_AMUX_THM4_100K_PU>; + conn-therm@147 { + reg = <PM8350_ADC7_AMUX_THM4_100K_PU(1)>; qcom,ratiometric; qcom,hw-settle-time = <200>; }; @@ -247,7 +247,7 @@ examples: conn-therm@1 { reg = <1>; - io-channels = <&pmk8350_vadc PM8350_ADC7_AMUX_THM4_100K_PU>; + io-channels = <&pmk8350_vadc PM8350_ADC7_AMUX_THM4_100K_PU(1)>; qcom,avg-samples = <2>; qcom,ratiometric; qcom,hw-settle-time-us = <200>; diff --git a/MAINTAINERS b/MAINTAINERS index beed24d3ff2d..0d981f006222 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2623,7 +2623,7 @@ W: http://www.armlinux.org.uk/ ARM/QUALCOMM SUPPORT M: Andy Gross <agross@kernel.org> M: Bjorn Andersson <andersson@kernel.org> -R: Konrad Dybcio <konrad.dybcio@somainline.org> +R: Konrad Dybcio <konrad.dybcio@linaro.org> L: linux-arm-msm@vger.kernel.org S: Maintained T: git git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux.git diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index d7669a7cee9f..afe496a93f94 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -33,12 +33,14 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8994-sony-xperia-kitakami-satsuki.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8994-sony-xperia-kitakami-sumire.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8994-sony-xperia-kitakami-suzuran.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8996-mtp.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8996-oneplus3.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8996-oneplus3t.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8996-sony-xperia-tone-dora.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8996-sony-xperia-tone-kagura.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8996-sony-xperia-tone-keyaki.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8996-xiaomi-gemini.dtb -dtb-$(CONFIG_ARCH_QCOM) += msm8996-xiaomi-natrium.dtb -dtb-$(CONFIG_ARCH_QCOM) += msm8996-xiaomi-scorpio.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8996pro-xiaomi-natrium.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8996pro-xiaomi-scorpio.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8998-asus-novago-tp370ql.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8998-fxtec-pro1.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8998-hp-envy-x2.dtb @@ -87,6 +89,8 @@ dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pazquel-lte-parade.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pazquel-lte-ti.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pazquel-parade.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pazquel-ti.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pazquel360-lte.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pazquel360-wifi.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r1.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r1-lte.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r2.dtb @@ -104,7 +108,8 @@ dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-wormdingler-rev1-boe-rt5682s.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-r1.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-r1-lte.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-crd.dtb -dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-evoker-r0.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-evoker.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-evoker-lte.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-herobrine-r1.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-villager-r0.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-villager-r1.dtb @@ -122,6 +127,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-nile-voyager.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm632-fairphone-fp3.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm636-sony-xperia-ganges-mermaid.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm660-xiaomi-lavender.dtb +dtb-$(CONFIG_ARCH_QCOM) += sdm670-google-sargo.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r1.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r2.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r3.dtb @@ -131,16 +137,20 @@ dtb-$(CONFIG_ARCH_QCOM) += sdm845-lg-judyp.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-oneplus-enchilada.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-oneplus-fajita.dtb +dtb-$(CONFIG_ARCH_QCOM) += sdm845-samsung-starqltechn.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-sony-xperia-tama-akari.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-sony-xperia-tama-akatsuki.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-sony-xperia-tama-apollo.dtb -dtb-$(CONFIG_ARCH_QCOM) += sdm845-xiaomi-beryllium.dtb +dtb-$(CONFIG_ARCH_QCOM) += sdm845-xiaomi-beryllium-ebbg.dtb +dtb-$(CONFIG_ARCH_QCOM) += sdm845-xiaomi-beryllium-tianma.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-xiaomi-polaris.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-shift-axolotl.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm850-lenovo-yoga-c630.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm850-samsung-w737.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm4250-oneplus-billie2.dtb dtb-$(CONFIG_ARCH_QCOM) += sm6125-sony-xperia-seine-pdx201.dtb dtb-$(CONFIG_ARCH_QCOM) += sm6350-sony-xperia-lena-pdx213.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm6375-sony-xperia-murray-pdx225.dtb dtb-$(CONFIG_ARCH_QCOM) += sm7225-fairphone-fp4.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8150-hdk.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8150-microsoft-surface-duo.dtb diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts index 1b613098fb4a..ef5b39ba1238 100644 --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts @@ -718,14 +718,14 @@ "USR_LED_2_CTRL", /* GPIO 120 */ "SB_HS_ID"; - msmgpio_leds: msmgpio-leds { + msmgpio_leds: msmgpio-leds-state { pins = "gpio21", "gpio120"; function = "gpio"; output-low; }; - usb_id_default: usb-id-default { + usb_id_default: usb-id-default-state { pins = "gpio121"; function = "gpio"; @@ -734,7 +734,7 @@ bias-pull-up; }; - adv7533_int_active: adv533-int-active { + adv7533_int_active: adv533-int-active-state { pins = "gpio31"; function = "gpio"; @@ -742,7 +742,7 @@ bias-disable; }; - adv7533_int_suspend: adv7533-int-suspend { + adv7533_int_suspend: adv7533-int-suspend-state { pins = "gpio31"; function = "gpio"; @@ -750,7 +750,7 @@ bias-disable; }; - adv7533_switch_active: adv7533-switch-active { + adv7533_switch_active: adv7533-switch-active-state { pins = "gpio32"; function = "gpio"; @@ -758,7 +758,7 @@ bias-disable; }; - adv7533_switch_suspend: adv7533-switch-suspend { + adv7533_switch_suspend: adv7533-switch-suspend-state { pins = "gpio32"; function = "gpio"; @@ -766,7 +766,7 @@ bias-disable; }; - msm_key_volp_n_default: msm-key-volp-n-default { + msm_key_volp_n_default: msm-key-volp-n-default-state { pins = "gpio107"; function = "gpio"; @@ -839,7 +839,7 @@ function = "digital"; output-low; - power-source = <PM8916_MPP_L5>; // 1.8V + power-source = <PM8916_MPP_L5>; /* 1.8V */ }; pm8916_mpps_leds: pm8916-mpps-state { diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts index 5cdc7ac1a9c0..fe6c415e8229 100644 --- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts +++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts @@ -422,82 +422,46 @@ "NC", /* GPIO_148 */ "NC"; /* GPIO_149 */ - sdc2_cd_on: sdc2_cd_on { - mux { - pins = "gpio38"; - function = "gpio"; - }; - - config { - pins = "gpio38"; - bias-pull-up; /* pull up */ - drive-strength = <16>; /* 16 MA */ - }; + sdc2_cd_on: sdc2-cd-on-state { + pins = "gpio38"; + function = "gpio"; + bias-pull-up; + drive-strength = <16>; }; - sdc2_cd_off: sdc2_cd_off { - mux { - pins = "gpio38"; - function = "gpio"; - }; - - config { - pins = "gpio38"; - bias-pull-up; /* pull up */ - drive-strength = <2>; /* 2 MA */ - }; + sdc2_cd_off: sdc2-cd-off-state { + pins = "gpio38"; + function = "gpio"; + bias-pull-up; + drive-strength = <2>; }; - hdmi_hpd_active: hdmi_hpd_active { - mux { - pins = "gpio34"; - function = "hdmi_hot"; - }; - - config { - pins = "gpio34"; - bias-pull-down; - drive-strength = <16>; - }; + hdmi_hpd_active: hdmi-hpd-active-state { + pins = "gpio34"; + function = "hdmi_hot"; + bias-pull-down; + drive-strength = <16>; }; - hdmi_hpd_suspend: hdmi_hpd_suspend { - mux { - pins = "gpio34"; - function = "hdmi_hot"; - }; - - config { - pins = "gpio34"; - bias-pull-down; - drive-strength = <2>; - }; + hdmi_hpd_suspend: hdmi-hpd-suspend-state { + pins = "gpio34"; + function = "hdmi_hot"; + bias-pull-down; + drive-strength = <2>; }; - hdmi_ddc_active: hdmi_ddc_active { - mux { - pins = "gpio32", "gpio33"; - function = "hdmi_ddc"; - }; - - config { - pins = "gpio32", "gpio33"; - drive-strength = <2>; - bias-pull-up; - }; + hdmi_ddc_active: hdmi-ddc-active-state { + pins = "gpio32", "gpio33"; + function = "hdmi_ddc"; + drive-strength = <2>; + bias-pull-up; }; - hdmi_ddc_suspend: hdmi_ddc_suspend { - mux { - pins = "gpio32", "gpio33"; - function = "hdmi_ddc"; - }; - - config { - pins = "gpio32", "gpio33"; - drive-strength = <2>; - bias-pull-down; - }; + hdmi_ddc_suspend: hdmi-ddc-suspend-state { + pins = "gpio32", "gpio33"; + function = "hdmi_ddc"; + drive-strength = <2>; + bias-pull-down; }; }; @@ -560,7 +524,7 @@ pins = "gpio5"; function = PMIC_GPIO_FUNC_NORMAL; output-low; - power-source = <2>; // PM8994_GPIO_S4, 1.8V + power-source = <PM8994_GPIO_S4>; /* 1.8V */ }; }; @@ -569,7 +533,7 @@ pins = "gpio19"; function = PMIC_GPIO_FUNC_NORMAL; output-low; - power-source = <PM8994_GPIO_S4>; // 1.8V + power-source = <PM8994_GPIO_S4>; /* 1.8V */ qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; bias-pull-down; }; @@ -580,7 +544,7 @@ pins = "gpio8"; function = PMIC_GPIO_FUNC_NORMAL; output-low; - power-source = <PM8994_GPIO_S4>; // 1.8V + power-source = <PM8994_GPIO_S4>; /* 1.8V */ qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; bias-pull-down; }; @@ -590,7 +554,7 @@ pinconf { pins = "gpio15"; function = "func1"; - power-source = <PM8994_GPIO_S4>; // 1.8V + power-source = <PM8994_GPIO_S4>; /* 1.8V */ }; }; @@ -602,7 +566,7 @@ drive-push-pull; bias-pull-up; qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; - power-source = <PM8994_GPIO_S4>; // 1.8V + power-source = <PM8994_GPIO_S4>; /* 1.8V */ }; }; @@ -623,7 +587,7 @@ input-enable; bias-pull-down; qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; - power-source = <PM8994_GPIO_S4>; // 1.8V + power-source = <PM8994_GPIO_S4>; /* 1.8V */ }; }; }; @@ -679,7 +643,7 @@ input-enable; bias-pull-down; qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; - power-source = <PM8994_GPIO_S4>; // 1.8V + power-source = <PM8994_GPIO_S4>; /* 1.8V */ }; }; }; @@ -751,7 +715,7 @@ }; &rpm_requests { - pm8994-regulators { + regulators-0 { compatible = "qcom,rpm-pm8994-regulators"; vdd_s1-supply = <&vph_pwr>; @@ -963,7 +927,7 @@ }; }; - pmi8994-regulators { + regulators-1 { compatible = "qcom,rpm-pmi8994-regulators"; vdd_s1-supply = <&vph_pwr>; diff --git a/arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts b/arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts index 92f264891d84..71e0a500599c 100644 --- a/arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts +++ b/arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts @@ -104,65 +104,27 @@ status = "okay"; }; -&tlmm { - sdc2_pins_default: sdc2-pins-default { - clk { - pins = "sdc2_clk"; - bias-disable; - drive-strength = <16>; - }; - - cmd { - pins = "sdc2_cmd"; - bias-pull-up; - drive-strength = <10>; - }; - - data { - pins = "sdc2_data"; - bias-pull-up; - drive-strength = <10>; - }; +&sdc2_state_on { + cd-pins { + pins = "gpio38"; + function = "gpio"; - cd { - pins = "gpio38"; - function = "gpio"; - - bias-pull-up; - drive-strength = <16>; - }; + bias-pull-up; + drive-strength = <16>; }; +}; - sdc2_pins_sleep: sdc2-pins-sleep { - clk { - pins = "sdc2_clk"; - bias-disable; - drive-strength = <2>; - }; - - cmd { - pins = "sdc2_cmd"; - bias-pull-up; - drive-strength = <2>; - }; - - data { - pins = "sdc2_data"; - bias-pull-up; - drive-strength = <2>; - }; - - cd { - pins = "gpio38"; - function = "gpio"; - bias-pull-up; - drive-strength = <2>; - }; +&sdc2_state_off { + cd-pins { + pins = "gpio38"; + function = "gpio"; + bias-pull-up; + drive-strength = <2>; }; }; &rpm_requests { - pm8994-regulators { + regulators-0 { compatible = "qcom,rpm-pm8994-regulators"; vdd_s1-supply = <&vph_pwr>; @@ -372,10 +334,6 @@ vmmc-supply = <&vreg_l21a_2p95>; vqmmc-supply = <&vreg_l13a_2p95>; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc2_pins_default>; - pinctrl-1 = <&sdc2_pins_sleep>; }; &ufshc { diff --git a/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts b/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts index 1ba2eca33c7b..2aee8594b280 100644 --- a/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts +++ b/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts @@ -19,7 +19,6 @@ chosen { stdout-path = "serial0:115200n8"; - bootargs-append = " swiotlb=1"; }; }; @@ -37,6 +36,8 @@ &blsp1_spi1 { cs-select = <0>; + pinctrl-0 = <&spi_0_pins>; + pinctrl-names = "default"; status = "okay"; flash@0 { @@ -49,13 +50,13 @@ }; &tlmm { - i2c_1_pins: i2c-1-pins { + i2c_1_pins: i2c-1-state { pins = "gpio42", "gpio43"; function = "blsp2_i2c"; drive-strength = <8>; }; - spi_0_pins: spi-0-pins { + spi_0_pins: spi-0-state { pins = "gpio38", "gpio39", "gpio40", "gpio41"; function = "blsp0_spi"; drive-strength = <8>; @@ -80,9 +81,9 @@ }; &qusb_phy_1 { - status = "ok"; + status = "okay"; }; &usb2 { - status = "ok"; + status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi index a7c7ca980a71..9ebb9e2371b1 100644 --- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi @@ -218,14 +218,14 @@ interrupt-controller; #interrupt-cells = <2>; - serial_3_pins: serial3-pinmux { + serial_3_pins: serial3-state { pins = "gpio44", "gpio45"; function = "blsp2_uart"; drive-strength = <8>; bias-pull-down; }; - qpic_pins: qpic-pins { + qpic_pins: qpic-state { pins = "gpio1", "gpio3", "gpio4", "gpio5", "gpio6", "gpio7", "gpio8", "gpio10", "gpio11", @@ -348,7 +348,7 @@ status = "disabled"; }; - qpic_nand: nand@79b0000 { + qpic_nand: nand-controller@79b0000 { compatible = "qcom,ipq6018-nand"; reg = <0x0 0x079b0000 0x0 0x10000>; #address-cells = <1>; @@ -511,14 +511,6 @@ clock-names = "xo"; }; - timer { - compatible = "arm,armv8-timer"; - interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; - }; - timer@b120000 { #address-cells = <1>; #size-cells = <1>; @@ -770,6 +762,14 @@ }; }; + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + }; + wcss: wcss-smp2p { compatible = "qcom,smp2p"; qcom,smem = <435>, <428>; diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts index 7143c936de61..ca3f96646b90 100644 --- a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts +++ b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts @@ -1,8 +1,11 @@ // SPDX-License-Identifier: GPL-2.0-only /dts-v1/; -/* Copyright (c) 2017, The Linux Foundation. All rights reserved. +/* + * Copyright (c) 2017, The Linux Foundation. All rights reserved. */ #include "ipq8074.dtsi" +#include "pmp8074.dtsi" +#include <dt-bindings/gpio/gpio.h> / { model = "Qualcomm Technologies, Inc. IPQ8074-HK01"; @@ -51,12 +54,12 @@ &pcie0 { status = "okay"; - perst-gpios = <&tlmm 61 0x1>; + perst-gpios = <&tlmm 61 GPIO_ACTIVE_LOW>; }; &pcie1 { status = "okay"; - perst-gpios = <&tlmm 58 0x1>; + perst-gpios = <&tlmm 58 GPIO_ACTIVE_LOW>; }; &pcie_phy0 { @@ -84,6 +87,7 @@ &sdhc_1 { status = "okay"; + vqmmc-supply = <&l11>; }; &qusb_phy_0 { diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk10-c1.dts b/arch/arm64/boot/dts/qcom/ipq8074-hk10-c1.dts index 2bfcf42aeabc..cc1992ca0519 100644 --- a/arch/arm64/boot/dts/qcom/ipq8074-hk10-c1.dts +++ b/arch/arm64/boot/dts/qcom/ipq8074-hk10-c1.dts @@ -1,5 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only -/* Copyright (c) 2020 The Linux Foundation. All rights reserved. +/* + * Copyright (c) 2020 The Linux Foundation. All rights reserved. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk10-c2.dts b/arch/arm64/boot/dts/qcom/ipq8074-hk10-c2.dts index 7da39f1d979b..d7f0efda6b8e 100644 --- a/arch/arm64/boot/dts/qcom/ipq8074-hk10-c2.dts +++ b/arch/arm64/boot/dts/qcom/ipq8074-hk10-c2.dts @@ -1,6 +1,7 @@ // SPDX-License-Identifier: GPL-2.0-only /dts-v1/; -/* Copyright (c) 2020 The Linux Foundation. All rights reserved. +/* + * Copyright (c) 2020 The Linux Foundation. All rights reserved. */ #include "ipq8074-hk10.dtsi" diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi b/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi index db4b87944cdf..651a231554e0 100644 --- a/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi @@ -5,6 +5,7 @@ /dts-v1/; #include "ipq8074.dtsi" +#include <dt-bindings/gpio/gpio.h> / { aliases { @@ -22,7 +23,7 @@ }; &blsp1_spi1 { - status = "ok"; + status = "okay"; flash@0 { #address-cells = <1>; @@ -34,33 +35,33 @@ }; &blsp1_uart5 { - status = "ok"; + status = "okay"; }; &pcie0 { - status = "ok"; - perst-gpios = <&tlmm 58 0x1>; + status = "okay"; + perst-gpios = <&tlmm 58 GPIO_ACTIVE_LOW>; }; &pcie1 { - status = "ok"; - perst-gpios = <&tlmm 61 0x1>; + status = "okay"; + perst-gpios = <&tlmm 61 GPIO_ACTIVE_LOW>; }; &pcie_phy0 { - status = "ok"; + status = "okay"; }; &pcie_phy1 { - status = "ok"; + status = "okay"; }; &qpic_bam { - status = "ok"; + status = "okay"; }; &qpic_nand { - status = "ok"; + status = "okay"; nand@0 { reg = <0>; diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi index a47acf9bdf24..4e51d8e3df04 100644 --- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi @@ -129,10 +129,10 @@ status = "disabled"; usb1_ssphy: phy@58200 { - reg = <0x00058200 0x130>, /* Tx */ + reg = <0x00058200 0x130>, /* Tx */ <0x00058400 0x200>, /* Rx */ - <0x00058800 0x1f8>, /* PCS */ - <0x00058600 0x044>; /* PCS misc*/ + <0x00058800 0x1f8>, /* PCS */ + <0x00058600 0x044>; /* PCS misc */ #phy-cells = <0>; #clock-cells = <0>; clocks = <&gcc GCC_USB1_PIPE_CLK>; @@ -172,10 +172,10 @@ status = "disabled"; usb0_ssphy: phy@78200 { - reg = <0x00078200 0x130>, /* Tx */ + reg = <0x00078200 0x130>, /* Tx */ <0x00078400 0x200>, /* Rx */ - <0x00078800 0x1f8>, /* PCS */ - <0x00078600 0x044>; /* PCS misc*/ + <0x00078800 0x1f8>, /* PCS */ + <0x00078600 0x044>; /* PCS misc */ #phy-cells = <0>; #clock-cells = <0>; clocks = <&gcc GCC_USB0_PIPE_CLK>; @@ -273,6 +273,16 @@ status = "disabled"; }; + tsens: thermal-sensor@4a9000 { + compatible = "qcom,ipq8074-tsens"; + reg = <0x4a9000 0x1000>, /* TM */ + <0x4a8000 0x1000>; /* SROT */ + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "combined"; + #qcom,sensors = <16>; + #thermal-sensor-cells = <1>; + }; + cryptobam: dma-controller@704000 { compatible = "qcom,bam-v1.7.0"; reg = <0x00704000 0x20000>; @@ -307,35 +317,35 @@ interrupt-controller; #interrupt-cells = <0x2>; - serial_4_pins: serial4-pinmux { + serial_4_pins: serial4-state { pins = "gpio23", "gpio24"; function = "blsp4_uart1"; drive-strength = <8>; bias-disable; }; - i2c_0_pins: i2c-0-pinmux { + i2c_0_pins: i2c-0-state { pins = "gpio42", "gpio43"; function = "blsp1_i2c"; drive-strength = <8>; bias-disable; }; - spi_0_pins: spi-0-pins { + spi_0_pins: spi-0-state { pins = "gpio38", "gpio39", "gpio40", "gpio41"; function = "blsp0_spi"; drive-strength = <8>; bias-disable; }; - hsuart_pins: hsuart-pins { + hsuart_pins: hsuart-state { pins = "gpio46", "gpio47", "gpio48", "gpio49"; function = "blsp2_uart"; drive-strength = <8>; bias-disable; }; - qpic_pins: qpic-pins { + qpic_pins: qpic-state { pins = "gpio1", "gpio3", "gpio4", "gpio5", "gpio6", "gpio7", "gpio8", "gpio10", "gpio11", @@ -350,9 +360,11 @@ gcc: gcc@1800000 { compatible = "qcom,gcc-ipq8074"; reg = <0x01800000 0x80000>; - #clock-cells = <0x1>; + clocks = <&xo>, <&sleep_clk>; + clock-names = "xo", "sleep_clk"; + #clock-cells = <1>; #power-domain-cells = <1>; - #reset-cells = <0x1>; + #reset-cells = <1>; }; tcsr_mutex: hwlock@1905000 { @@ -668,12 +680,22 @@ apcs_glb: mailbox@b111000 { compatible = "qcom,ipq8074-apcs-apps-global"; - reg = <0x0b111000 0x6000>; + reg = <0x0b111000 0x1000>; + clocks = <&a53pll>, <&xo>; + clock-names = "pll", "xo"; #clock-cells = <1>; #mbox-cells = <1>; }; + a53pll: clock@b116000 { + compatible = "qcom,ipq8074-a53pll"; + reg = <0x0b116000 0x40>; + #clock-cells = <0>; + clocks = <&xo>; + clock-names = "xo"; + }; + timer@b120000 { #address-cells = <1>; #size-cells = <1>; @@ -865,4 +887,90 @@ <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; }; + + thermal-zones { + nss-top-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 4>; + }; + + nss0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 5>; + }; + + nss1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 6>; + }; + + wcss-phya0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 7>; + }; + + wcss-phya1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 8>; + }; + + cpu0_thermal: cpu0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 9>; + }; + + cpu1_thermal: cpu1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 10>; + }; + + cpu2_thermal: cpu2-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 11>; + }; + + cpu3_thermal: cpu3-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 12>; + }; + + cluster_thermal: cluster-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 13>; + }; + + wcss-phyb0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 14>; + }; + + wcss-phyb1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 15>; + }; + }; }; diff --git a/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts b/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts index 3dc9619fde6e..701a5585d77e 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts @@ -5,6 +5,7 @@ #include "msm8916-pm8916.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> / { model = "Alcatel OneTouch Idol 3 (4.7)"; @@ -34,6 +35,19 @@ }; }; + gpio-leds { + compatible = "gpio-leds"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_leds_default>; + + led-0 { + gpios = <&msmgpio 32 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "torch"; + function = LED_FUNCTION_TORCH; + }; + }; + usb_id: usb-id { compatible = "linux,extcon-usb-gpio"; id-gpio = <&msmgpio 69 GPIO_ACTIVE_HIGH>; @@ -116,6 +130,27 @@ }; }; +&blsp_i2c6 { + status = "okay"; + + led-controller@68 { + compatible = "si-en,sn3190"; + reg = <0x68>; + shutdown-gpios = <&msmgpio 89 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&led_enable_default &led_shutdown_default>; + #address-cells = <1>; + #size-cells = <0>; + + led@1 { + reg = <1>; + led-max-microamp = <5000>; + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_WHITE>; + }; + }; +}; + &pm8916_resin { status = "okay"; linux,code = <KEY_VOLUMEDOWN>; @@ -260,7 +295,7 @@ }; &msmgpio { - accel_int_default: accel-int-default { + accel_int_default: accel-int-default-state { pins = "gpio31"; function = "gpio"; @@ -268,7 +303,7 @@ bias-disable; }; - gpio_keys_default: gpio-keys-default { + gpio_keys_default: gpio-keys-default-state { pins = "gpio107"; function = "gpio"; @@ -276,7 +311,15 @@ bias-pull-up; }; - gyro_int_default: gyro-int-default { + gpio_leds_default: gpio-leds-default-state { + pins = "gpio32"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + gyro_int_default: gyro-int-default-state { pins = "gpio97", "gpio98"; function = "gpio"; @@ -284,7 +327,30 @@ bias-disable; }; - mag_reset_default: mag-reset-default { + /* + * The OEM wired an additional GPIO to be asserted so that + * the si-en,sn3190 LED IC works. Since this GPIO is not + * part of the IC datasheet nor supported by the driver, + * force it asserted here. + */ + led_enable_default: led-enable-default-state { + pins = "gpio102"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + output-high; + }; + + led_shutdown_default: led-shutdown-default-state { + pins = "gpio89"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + mag_reset_default: mag-reset-default-state { pins = "gpio8"; function = "gpio"; @@ -292,7 +358,7 @@ bias-disable; }; - proximity_int_default: proximity-int-default { + proximity_int_default: proximity-int-default-state { pins = "gpio12"; function = "gpio"; @@ -300,7 +366,7 @@ bias-pull-up; }; - ts_int_reset_default: ts-int-reset-default { + ts_int_reset_default: ts-int-reset-default-state { pins = "gpio13", "gpio100"; function = "gpio"; @@ -308,7 +374,7 @@ bias-disable; }; - usb_id_default: usb-id-default { + usb_id_default: usb-id-default-state { pins = "gpio69"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts b/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts index dd92070a1211..3618704a5330 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts @@ -263,7 +263,7 @@ }; &msmgpio { - gpio_keys_default: gpio-keys-default { + gpio_keys_default: gpio-keys-default-state { pins = "gpio107", "gpio117"; function = "gpio"; @@ -271,7 +271,7 @@ bias-pull-up; }; - imu_default: imu-default { + imu_default: imu-default-state { pins = "gpio36"; function = "gpio"; @@ -279,7 +279,7 @@ bias-disable; }; - mag_reset_default: mag-reset-default { + mag_reset_default: mag-reset-default-state { pins = "gpio112"; function = "gpio"; @@ -287,7 +287,7 @@ bias-disable; }; - sd_vmmc_en_default: sd-vmmc-en-default { + sd_vmmc_en_default: sd-vmmc-en-default-state { pins = "gpio87"; function = "gpio"; @@ -295,14 +295,16 @@ bias-disable; }; - touchscreen_default: touchscreen-default { - pins = "gpio13"; - function = "gpio"; + touchscreen_default: touchscreen-default-state { + touch-pins { + pins = "gpio13"; + function = "gpio"; - drive-strength = <2>; - bias-pull-up; + drive-strength = <2>; + bias-pull-up; + }; - reset { + reset-pins { pins = "gpio12"; function = "gpio"; @@ -311,7 +313,7 @@ }; }; - usb_id_default: usb-id-default { + usb_id_default: usb-id-default-state { pins = "gpio110"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts b/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts index 9e470c67274e..8c07eca900d3 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts @@ -1,5 +1,7 @@ // SPDX-License-Identifier: GPL-2.0-only -// Copyright (C) 2021 Stephan Gerhold +/* + * Copyright (C) 2021 Stephan Gerhold + */ /dts-v1/; @@ -414,7 +416,7 @@ }; &msmgpio { - accel_irq_default: accel-irq-default { + accel_irq_default: accel-irq-default-state { pins = "gpio115"; function = "gpio"; @@ -422,7 +424,7 @@ bias-disable; }; - gpio_keys_default: gpio-keys-default { + gpio_keys_default: gpio-keys-default-state { pins = "gpio107"; function = "gpio"; @@ -430,7 +432,7 @@ bias-pull-up; }; - gpio_leds_default: gpio-leds-default { + gpio_leds_default: gpio-leds-default-state { pins = "gpio8", "gpio9", "gpio10"; function = "gpio"; @@ -438,7 +440,7 @@ bias-disable; }; - nfc_default: nfc-default { + nfc_default: nfc-default-state { pins = "gpio2", "gpio20", "gpio21"; function = "gpio"; @@ -446,7 +448,7 @@ bias-disable; }; - mag_reset_default: mag-reset-default { + mag_reset_default: mag-reset-default-state { pins = "gpio36"; function = "gpio"; @@ -454,7 +456,7 @@ bias-disable; }; - prox_irq_default: prox-irq-default { + prox_irq_default: prox-irq-default-state { pins = "gpio113"; function = "gpio"; @@ -462,7 +464,7 @@ bias-disable; }; - reg_lcd_en_default: reg-lcd-en-default { + reg_lcd_en_default: reg-lcd-en-default-state { pins = "gpio32", "gpio97"; function = "gpio"; @@ -470,7 +472,7 @@ bias-disable; }; - sdhc2_cd_default: sdhc2-cd-default { + sdhc2_cd_default: sdhc2-cd-default-state { pins = "gpio56"; function = "gpio"; @@ -478,7 +480,7 @@ bias-disable; }; - ts_irq_default: ts-irq-default { + ts_irq_default: ts-irq-default-state { pins = "gpio13"; function = "gpio"; @@ -486,7 +488,7 @@ bias-disable; }; - usb_id_default: usb-id-default { + usb_id_default: usb-id-default-state { pins = "gpio117"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts index d85e7f7c0835..d1e8cf2f50c0 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts @@ -22,7 +22,7 @@ }; reserved-memory { - // wcnss.mdt is not relocatable, so it must be loaded at 0x8b600000 + /* wcnss.mdt is not relocatable, so it must be loaded at 0x8b600000 */ /delete-node/ wcnss@89300000; wcnss_mem: wcnss@8b600000 { @@ -204,12 +204,12 @@ rmi4-f01@1 { reg = <0x1>; - syna,nosleep-mode = <1>; // Allow sleeping + syna,nosleep-mode = <1>; /* Allow sleeping */ }; rmi4-f12@12 { reg = <0x12>; - syna,sensor-type = <1>; // Touchscreen + syna,sensor-type = <1>; /* Touchscreen */ }; }; }; @@ -367,7 +367,7 @@ }; &msmgpio { - accel_int_default: accel-int-default { + accel_int_default: accel-int-default-state { pins = "gpio116"; function = "gpio"; @@ -375,7 +375,7 @@ bias-disable; }; - camera_flash_default: camera-flash-default { + camera_flash_default: camera-flash-default-state { pins = "gpio31", "gpio32"; function = "gpio"; @@ -383,7 +383,7 @@ bias-disable; }; - ctp_pwr_en_default: ctp-pwr-en-default { + ctp_pwr_en_default: ctp-pwr-en-default-state { pins = "gpio17"; function = "gpio"; @@ -391,7 +391,7 @@ bias-disable; }; - gpio_keys_default: gpio-keys-default { + gpio_keys_default: gpio-keys-default-state { pins = "gpio107"; function = "gpio"; @@ -399,7 +399,7 @@ bias-pull-up; }; - gyro_int_default: gyro-int-default { + gyro_int_default: gyro-int-default-state { pins = "gpio22", "gpio23"; function = "gpio"; @@ -407,7 +407,7 @@ bias-disable; }; - light_int_default: light-int-default { + light_int_default: light-int-default-state { pins = "gpio115"; function = "gpio"; @@ -415,7 +415,7 @@ bias-disable; }; - magn_int_default: magn-int-default { + magn_int_default: magn-int-default-state { pins = "gpio113"; function = "gpio"; @@ -423,7 +423,7 @@ bias-disable; }; - tp_int_default: tp-int-default { + tp_int_default: tp-int-default-state { pins = "gpio13"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts index b4812f093b17..3899e11b9843 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts @@ -234,7 +234,7 @@ }; &msmgpio { - button_backlight_default: button-backlight-default { + button_backlight_default: button-backlight-default-state { pins = "gpio17"; function = "gpio"; @@ -242,7 +242,7 @@ bias-disable; }; - gpio_keys_default: gpio-keys-default { + gpio_keys_default: gpio-keys-default-state { pins = "gpio107"; function = "gpio"; @@ -250,7 +250,7 @@ bias-pull-up; }; - mag_reset_default: mag-reset-default { + mag_reset_default: mag-reset-default-state { pins = "gpio111"; function = "gpio"; @@ -258,7 +258,7 @@ bias-disable; }; - usb_id_default: usb-id-default { + usb_id_default: usb-id-default-state { pins = "gpio110"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi b/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi index 7dedb91b9930..33dfcf318a81 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi @@ -5,8 +5,8 @@ &msmgpio { - blsp1_uart1_default: blsp1-uart1-default { - // TX, RX, CTS_N, RTS_N + blsp1_uart1_default: blsp1-uart1-default-state { + /* TX, RX, CTS_N, RTS_N */ pins = "gpio0", "gpio1", "gpio2", "gpio3"; function = "blsp_uart1"; @@ -14,7 +14,7 @@ bias-disable; }; - blsp1_uart1_sleep: blsp1-uart1-sleep { + blsp1_uart1_sleep: blsp1-uart1-sleep-state { pins = "gpio0", "gpio1", "gpio2", "gpio3"; function = "gpio"; @@ -22,7 +22,7 @@ bias-pull-down; }; - blsp1_uart2_default: blsp1-uart2-default { + blsp1_uart2_default: blsp1-uart2-default-state { pins = "gpio4", "gpio5"; function = "blsp_uart2"; @@ -30,7 +30,7 @@ bias-disable; }; - blsp1_uart2_sleep: blsp1-uart2-sleep { + blsp1_uart2_sleep: blsp1-uart2-sleep-state { pins = "gpio4", "gpio5"; function = "gpio"; @@ -38,14 +38,15 @@ bias-pull-down; }; - spi1_default: spi1-default { - pins = "gpio0", "gpio1", "gpio3"; - function = "blsp_spi1"; + spi1_default: spi1-default-state { + spi-pins { + pins = "gpio0", "gpio1", "gpio3"; + function = "blsp_spi1"; - drive-strength = <12>; - bias-disable; - - cs { + drive-strength = <12>; + bias-disable; + }; + cs-pins { pins = "gpio2"; function = "gpio"; @@ -55,7 +56,7 @@ }; }; - spi1_sleep: spi1-sleep { + spi1_sleep: spi1-sleep-state { pins = "gpio0", "gpio1", "gpio2", "gpio3"; function = "gpio"; @@ -63,14 +64,15 @@ bias-pull-down; }; - spi2_default: spi2-default { - pins = "gpio4", "gpio5", "gpio7"; - function = "blsp_spi2"; + spi2_default: spi2-default-state { + spi-pins { + pins = "gpio4", "gpio5", "gpio7"; + function = "blsp_spi2"; - drive-strength = <12>; - bias-disable; - - cs { + drive-strength = <12>; + bias-disable; + }; + cs-pins { pins = "gpio6"; function = "gpio"; @@ -80,7 +82,7 @@ }; }; - spi2_sleep: spi2-sleep { + spi2_sleep: spi2-sleep-state { pins = "gpio4", "gpio5", "gpio6", "gpio7"; function = "gpio"; @@ -88,14 +90,15 @@ bias-pull-down; }; - spi3_default: spi3-default { - pins = "gpio8", "gpio9", "gpio11"; - function = "blsp_spi3"; + spi3_default: spi3-default-state { + spi-pins { + pins = "gpio8", "gpio9", "gpio11"; + function = "blsp_spi3"; - drive-strength = <12>; - bias-disable; - - cs { + drive-strength = <12>; + bias-disable; + }; + cs-pins { pins = "gpio10"; function = "gpio"; @@ -105,7 +108,7 @@ }; }; - spi3_sleep: spi3-sleep { + spi3_sleep: spi3-sleep-state { pins = "gpio8", "gpio9", "gpio10", "gpio11"; function = "gpio"; @@ -113,14 +116,15 @@ bias-pull-down; }; - spi4_default: spi4-default { - pins = "gpio12", "gpio13", "gpio15"; - function = "blsp_spi4"; - - drive-strength = <12>; - bias-disable; + spi4_default: spi4-default-state { + spi-pins { + pins = "gpio12", "gpio13", "gpio15"; + function = "blsp_spi4"; - cs { + drive-strength = <12>; + bias-disable; + }; + cs-pins { pins = "gpio14"; function = "gpio"; @@ -130,7 +134,7 @@ }; }; - spi4_sleep: spi4-sleep { + spi4_sleep: spi4-sleep-state { pins = "gpio12", "gpio13", "gpio14", "gpio15"; function = "gpio"; @@ -138,14 +142,15 @@ bias-pull-down; }; - spi5_default: spi5-default { - pins = "gpio16", "gpio17", "gpio19"; - function = "blsp_spi5"; + spi5_default: spi5-default-state { + spi-pins { + pins = "gpio16", "gpio17", "gpio19"; + function = "blsp_spi5"; - drive-strength = <12>; - bias-disable; - - cs { + drive-strength = <12>; + bias-disable; + }; + cs-pins { pins = "gpio18"; function = "gpio"; @@ -155,7 +160,7 @@ }; }; - spi5_sleep: spi5-sleep { + spi5_sleep: spi5-sleep-state { pins = "gpio16", "gpio17", "gpio18", "gpio19"; function = "gpio"; @@ -163,14 +168,15 @@ bias-pull-down; }; - spi6_default: spi6-default { - pins = "gpio20", "gpio21", "gpio23"; - function = "blsp_spi6"; - - drive-strength = <12>; - bias-disable; + spi6_default: spi6-default-state { + spi-pins { + pins = "gpio20", "gpio21", "gpio23"; + function = "blsp_spi6"; - cs { + drive-strength = <12>; + bias-disable; + }; + cs-pins { pins = "gpio22"; function = "gpio"; @@ -180,7 +186,7 @@ }; }; - spi6_sleep: spi6-sleep { + spi6_sleep: spi6-sleep-state { pins = "gpio20", "gpio21", "gpio22", "gpio23"; function = "gpio"; @@ -188,7 +194,7 @@ bias-pull-down; }; - i2c1_default: i2c1-default { + i2c1_default: i2c1-default-state { pins = "gpio2", "gpio3"; function = "blsp_i2c1"; @@ -196,7 +202,7 @@ bias-disable; }; - i2c1_sleep: i2c1-sleep { + i2c1_sleep: i2c1-sleep-state { pins = "gpio2", "gpio3"; function = "gpio"; @@ -204,7 +210,7 @@ bias-disable; }; - i2c2_default: i2c2-default { + i2c2_default: i2c2-default-state { pins = "gpio6", "gpio7"; function = "blsp_i2c2"; @@ -212,7 +218,7 @@ bias-disable; }; - i2c2_sleep: i2c2-sleep { + i2c2_sleep: i2c2-sleep-state { pins = "gpio6", "gpio7"; function = "gpio"; @@ -220,7 +226,7 @@ bias-disable; }; - i2c3_default: i2c3-default { + i2c3_default: i2c3-default-state { pins = "gpio10", "gpio11"; function = "blsp_i2c3"; @@ -228,7 +234,7 @@ bias-disable; }; - i2c3_sleep: i2c3-sleep { + i2c3_sleep: i2c3-sleep-state { pins = "gpio10", "gpio11"; function = "gpio"; @@ -236,7 +242,7 @@ bias-disable; }; - i2c4_default: i2c4-default { + i2c4_default: i2c4-default-state { pins = "gpio14", "gpio15"; function = "blsp_i2c4"; @@ -244,7 +250,7 @@ bias-disable; }; - i2c4_sleep: i2c4-sleep { + i2c4_sleep: i2c4-sleep-state { pins = "gpio14", "gpio15"; function = "gpio"; @@ -252,7 +258,7 @@ bias-disable; }; - i2c5_default: i2c5-default { + i2c5_default: i2c5-default-state { pins = "gpio18", "gpio19"; function = "blsp_i2c5"; @@ -260,7 +266,7 @@ bias-disable; }; - i2c5_sleep: i2c5-sleep { + i2c5_sleep: i2c5-sleep-state { pins = "gpio18", "gpio19"; function = "gpio"; @@ -268,7 +274,7 @@ bias-disable; }; - i2c6_default: i2c6-default { + i2c6_default: i2c6-default-state { pins = "gpio22", "gpio23"; function = "blsp_i2c6"; @@ -276,7 +282,7 @@ bias-disable; }; - i2c6_sleep: i2c6-sleep { + i2c6_sleep: i2c6-sleep-state { pins = "gpio22", "gpio23"; function = "gpio"; @@ -284,14 +290,14 @@ bias-disable; }; - pmx-sdc1-clk { - sdc1_clk_on: clk-on { + pmx-sdc1-clk-state { + sdc1_clk_on: clk-on-pins { pins = "sdc1_clk"; bias-disable; drive-strength = <16>; }; - sdc1_clk_off: clk-off { + sdc1_clk_off: clk-off-pins { pins = "sdc1_clk"; bias-disable; @@ -299,14 +305,14 @@ }; }; - pmx-sdc1-cmd { - sdc1_cmd_on: cmd-on { + pmx-sdc1-cmd-state { + sdc1_cmd_on: cmd-on-pins { pins = "sdc1_cmd"; bias-pull-up; drive-strength = <10>; }; - sdc1_cmd_off: cmd-off { + sdc1_cmd_off: cmd-off-pins { pins = "sdc1_cmd"; bias-pull-up; @@ -314,14 +320,14 @@ }; }; - pmx-sdc1-data { - sdc1_data_on: data-on { + pmx-sdc1-data-state { + sdc1_data_on: data-on-pins { pins = "sdc1_data"; bias-pull-up; drive-strength = <10>; }; - sdc1_data_off: data-off { + sdc1_data_off: data-off-pins { pins = "sdc1_data"; bias-pull-up; @@ -329,14 +335,14 @@ }; }; - pmx-sdc2-clk { - sdc2_clk_on: clk-on { + pmx-sdc2-clk-state { + sdc2_clk_on: clk-on-pins { pins = "sdc2_clk"; bias-disable; drive-strength = <16>; }; - sdc2_clk_off: clk-off { + sdc2_clk_off: clk-off-pins { pins = "sdc2_clk"; bias-disable; @@ -344,14 +350,14 @@ }; }; - pmx-sdc2-cmd { - sdc2_cmd_on: cmd-on { + pmx-sdc2-cmd-state { + sdc2_cmd_on: cmd-on-pins { pins = "sdc2_cmd"; bias-pull-up; drive-strength = <10>; }; - sdc2_cmd_off: cmd-off { + sdc2_cmd_off: cmd-off-pins { pins = "sdc2_cmd"; bias-pull-up; @@ -359,14 +365,14 @@ }; }; - pmx-sdc2-data { - sdc2_data_on: data-on { + pmx-sdc2-data-state { + sdc2_data_on: data-on-pins { pins = "sdc2_data"; bias-pull-up; drive-strength = <10>; }; - sdc2_data_off: data-off { + sdc2_data_off: data-off-pins { pins = "sdc2_data"; bias-pull-up; @@ -374,15 +380,15 @@ }; }; - pmx-sdc2-cd-pin { - sdc2_cd_on: cd-on { + pmx-sdc2-cd-pin-state { + sdc2_cd_on: cd-on-pins { pins = "gpio38"; function = "gpio"; drive-strength = <2>; bias-pull-up; }; - sdc2_cd_off: cd-off { + sdc2_cd_off: cd-off-pins { pins = "gpio38"; function = "gpio"; @@ -391,8 +397,8 @@ }; }; - cdc-pdm-lines { - cdc_pdm_lines_act: pdm-lines-on { + cdc-pdm-lines-state { + cdc_pdm_lines_act: pdm-lines-on-pins { pins = "gpio63", "gpio64", "gpio65", "gpio66", "gpio67", "gpio68"; function = "cdc_pdm0"; @@ -400,7 +406,7 @@ drive-strength = <8>; bias-disable; }; - cdc_pdm_lines_sus: pdm-lines-off { + cdc_pdm_lines_sus: pdm-lines-off-pins { pins = "gpio63", "gpio64", "gpio65", "gpio66", "gpio67", "gpio68"; function = "cdc_pdm0"; @@ -410,15 +416,15 @@ }; }; - ext-pri-tlmm-lines { - ext_pri_tlmm_lines_act: ext-pa-on { + ext-pri-tlmm-lines-state { + ext_pri_tlmm_lines_act: ext-pa-on-pins { pins = "gpio113", "gpio114", "gpio115", "gpio116"; function = "pri_mi2s"; drive-strength = <8>; bias-disable; }; - ext_pri_tlmm_lines_sus: ext-pa-off { + ext_pri_tlmm_lines_sus: ext-pa-off-pins { pins = "gpio113", "gpio114", "gpio115", "gpio116"; function = "pri_mi2s"; @@ -427,15 +433,15 @@ }; }; - ext-pri-ws-line { - ext_pri_ws_act: ext-pa-on { + ext-pri-ws-line-state { + ext_pri_ws_act: ext-pa-on-pins { pins = "gpio110"; function = "pri_mi2s_ws"; drive-strength = <8>; bias-disable; }; - ext_pri_ws_sus: ext-pa-off { + ext_pri_ws_sus: ext-pa-off-pins { pins = "gpio110"; function = "pri_mi2s_ws"; @@ -444,15 +450,15 @@ }; }; - ext-mclk-tlmm-lines { - ext_mclk_tlmm_lines_act: mclk-lines-on { + ext-mclk-tlmm-lines-state { + ext_mclk_tlmm_lines_act: mclk-lines-on-pins { pins = "gpio116"; function = "pri_mi2s"; drive-strength = <8>; bias-disable; }; - ext_mclk_tlmm_lines_sus: mclk-lines-off { + ext_mclk_tlmm_lines_sus: mclk-lines-off-pins { pins = "gpio116"; function = "pri_mi2s"; @@ -462,15 +468,15 @@ }; /* secondary Mi2S */ - ext-sec-tlmm-lines { - ext_sec_tlmm_lines_act: tlmm-lines-on { + ext-sec-tlmm-lines-state { + ext_sec_tlmm_lines_act: tlmm-lines-on-pins { pins = "gpio112", "gpio117", "gpio118", "gpio119"; function = "sec_mi2s"; drive-strength = <8>; bias-disable; }; - ext_sec_tlmm_lines_sus: tlmm-lines-off { + ext_sec_tlmm_lines_sus: tlmm-lines-off-pins { pins = "gpio112", "gpio117", "gpio118", "gpio119"; function = "sec_mi2s"; @@ -479,40 +485,38 @@ }; }; - cdc-dmic-lines { - cdc_dmic_lines_act: dmic-lines-on { - clk { - pins = "gpio0"; - function = "dmic0_clk"; + cdc_dmic_lines_act: cdc-dmic-lines-on-state { + clk-pins { + pins = "gpio0"; + function = "dmic0_clk"; - drive-strength = <8>; - }; - data { - pins = "gpio1"; - function = "dmic0_data"; + drive-strength = <8>; + }; + data-pins { + pins = "gpio1"; + function = "dmic0_data"; - drive-strength = <8>; - }; + drive-strength = <8>; }; - cdc_dmic_lines_sus: dmic-lines-off { - clk { - pins = "gpio0"; - function = "dmic0_clk"; + }; + cdc_dmic_lines_sus: cdc-dmic-lines-off-state { + clk-pins { + pins = "gpio0"; + function = "dmic0_clk"; - drive-strength = <2>; - bias-disable; - }; - data { - pins = "gpio1"; - function = "dmic0_data"; + drive-strength = <2>; + bias-disable; + }; + data-pins { + pins = "gpio1"; + function = "dmic0_data"; - drive-strength = <2>; - bias-disable; - }; + drive-strength = <2>; + bias-disable; }; }; - wcnss_pin_a: wcnss-active { + wcnss_pin_a: wcnss-active-state { pins = "gpio40", "gpio41", "gpio42", "gpio43", "gpio44"; function = "wcss_wlan"; @@ -520,7 +524,7 @@ bias-pull-up; }; - cci0_default: cci0-default { + cci0_default: cci0-default-state { pins = "gpio29", "gpio30"; function = "cci_i2c"; @@ -528,22 +532,22 @@ bias-disable; }; - camera_front_default: camera-front-default { - pwdn { + camera_front_default: camera-front-default-state { + pwdn-pins { pins = "gpio33"; function = "gpio"; drive-strength = <16>; bias-disable; }; - rst { + rst-pins { pins = "gpio28"; function = "gpio"; drive-strength = <16>; bias-disable; }; - mclk1 { + mclk1-pins { pins = "gpio27"; function = "cam_mclk1"; @@ -552,22 +556,22 @@ }; }; - camera_rear_default: camera-rear-default { - pwdn { + camera_rear_default: camera-rear-default-state { + pwdn-pins { pins = "gpio34"; function = "gpio"; drive-strength = <16>; bias-disable; }; - rst { + rst-pins { pins = "gpio35"; function = "gpio"; drive-strength = <16>; bias-disable; }; - mclk0 { + mclk0-pins { pins = "gpio26"; function = "cam_mclk0"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-pm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916-pm8916.dtsi index 539823b2c36e..8cac23b5240c 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-pm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-pm8916.dtsi @@ -47,7 +47,7 @@ }; &rpm_requests { - smd_rpm_regulators: pm8916-regulators { + smd_rpm_regulators: regulators { compatible = "qcom,rpm-pm8916-regulators"; /* pm8916_s1 is managed by rpmpd (MSM8916_VDDCX) */ diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi index 3255bd3fcb55..d600916a0e55 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi @@ -23,6 +23,17 @@ }; }; + clk_pwm: pwm { + compatible = "clk-pwm"; + #pwm-cells = <2>; + + clocks = <&gcc GCC_GP2_CLK>; + + pinctrl-names = "default"; + pinctrl-0 = <&motor_pwm_default>; + status = "disabled"; + }; + gpio-keys { compatible = "gpio-keys"; @@ -61,6 +72,24 @@ }; }; + /* + * NOTE: A5 connects GPIO 76 to a reglator powering the motor + * driver IC but A3 connects the same signal to an ENABLE pin of + * the driver. + */ + reg_motor_vdd: regulator-motor-vdd { + compatible = "regulator-fixed"; + regulator-name = "motor_vdd"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + + gpio = <&msmgpio 76 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&motor_en_default>; + }; + reg_vdd_tsp_a: regulator-vdd-tsp-a { compatible = "regulator-fixed"; regulator-name = "vdd_tsp_a"; @@ -144,7 +173,7 @@ interrupt-parent = <&msmgpio>; interrupts = <21 IRQ_TYPE_EDGE_RISING>; - en-gpios = <&msmgpio 20 GPIO_ACTIVE_HIGH>; + en-gpios = <&msmgpio 20 GPIO_ACTIVE_LOW>; wake-gpios = <&msmgpio 49 GPIO_ACTIVE_HIGH>; clocks = <&rpmcc RPM_SMD_BB_CLK2_PIN>; @@ -153,6 +182,16 @@ pinctrl-0 = <&nfc_default &nfc_clk_req>; }; }; + + vibrator: vibrator { + compatible = "pwm-vibrator"; + + pwms = <&clk_pwm 0 100000>; + pwm-names = "enable"; + + vcc-supply = <®_motor_vdd>; + status = "disabled"; + }; }; &blsp_i2c2 { @@ -348,7 +387,7 @@ }; &msmgpio { - accel_int_default: accel-int-default { + accel_int_default: accel-int-default-state { pins = "gpio115"; function = "gpio"; @@ -356,7 +395,7 @@ bias-disable; }; - fg_alert_default: fg-alert-default { + fg_alert_default: fg-alert-default-state { pins = "gpio121"; function = "gpio"; @@ -364,7 +403,7 @@ bias-disable; }; - gpio_keys_default: gpio-keys-default { + gpio_keys_default: gpio-keys-default-state { pins = "gpio107", "gpio109"; function = "gpio"; @@ -372,7 +411,7 @@ bias-pull-up; }; - gpio_hall_sensor_default: gpio-hall-sensor-default { + gpio_hall_sensor_default: gpio-hall-sensor-default-state { pins = "gpio52"; function = "gpio"; @@ -380,47 +419,60 @@ bias-disable; }; - mdss { - mdss_default: mdss-default { - pins = "gpio25"; - function = "gpio"; + mdss_default: mdss-default-state { + pins = "gpio25"; + function = "gpio"; - drive-strength = <8>; - bias-disable; - }; - mdss_sleep: mdss-sleep { - pins = "gpio25"; - function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + mdss_sleep: mdss-sleep-state { + pins = "gpio25"; + function = "gpio"; - drive-strength = <2>; - bias-pull-down; - }; + drive-strength = <2>; + bias-pull-down; }; - muic_i2c_default: muic-i2c-default { - pins = "gpio105", "gpio106"; + motor_en_default: motor-en-default-stae { + pins = "gpio76"; function = "gpio"; drive-strength = <2>; bias-disable; }; - muic_int_default: muic-int-default { - pins = "gpio12"; + motor_pwm_default: motor-pwm-default-state { + pins = "gpio50"; + function = "gcc_gp2_clk_a"; + }; + + muic_i2c_default: muic-i2c-default-state { + pins = "gpio105", "gpio106"; function = "gpio"; drive-strength = <2>; bias-disable; }; - nfc_default: nfc-default { - pins = "gpio20", "gpio49"; + muic_int_default: muic-int-default-state { + pins = "gpio12"; function = "gpio"; drive-strength = <2>; bias-disable; + }; + + nfc_default: nfc-default-state { + nfc-pins { + pins = "gpio20", "gpio49"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; - irq { + irq-pins { pins = "gpio21"; function = "gpio"; @@ -429,7 +481,7 @@ }; }; - nfc_i2c_default: nfc-i2c-default { + nfc_i2c_default: nfc-i2c-default-state { pins = "gpio0", "gpio1"; function = "gpio"; @@ -437,7 +489,7 @@ bias-disable; }; - tkey_default: tkey-default { + tkey_default: tkey-default-state { pins = "gpio98"; function = "gpio"; @@ -445,7 +497,7 @@ bias-disable; }; - tkey_i2c_default: tkey-i2c-default { + tkey_i2c_default: tkey-i2c-default-state { pins = "gpio16", "gpio17"; function = "gpio"; @@ -453,7 +505,7 @@ bias-disable; }; - tsp_en_default: tsp-en-default { + tsp_en_default: tsp-en-default-state { pins = "gpio73"; function = "gpio"; @@ -461,7 +513,7 @@ bias-disable; }; - ts_int_default: ts-int-default { + ts_int_default: ts-int-default-state { pins = "gpio13"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts index 6db5f78ca286..c691cca2eb45 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts @@ -81,6 +81,10 @@ }; }; +&clk_pwm { + status = "okay"; +}; + &dsi0 { panel@0 { reg = <0>; @@ -104,8 +108,12 @@ remote-endpoint = <&panel_in>; }; +&vibrator { + status = "okay"; +}; + &msmgpio { - panel_vdd3_default: panel-vdd3-default { + panel_vdd3_default: panel-vdd3-default-state { pins = "gpio9"; function = "gpio"; @@ -113,7 +121,7 @@ bias-disable; }; - tkey_en_default: tkey-en-default { + tkey_en_default: tkey-en-default-state { pins = "gpio86"; function = "gpio"; @@ -121,7 +129,7 @@ bias-disable; }; - tkey_led_en_default: tkey-led-en-default { + tkey_led_en_default: tkey-led-en-default-state { pins = "gpio60"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts index 5fb8ecd0c9ca..3dd819458785 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts @@ -50,6 +50,10 @@ }; }; +&clk_pwm { + status = "okay"; +}; + &pronto { iris { compatible = "qcom,wcn3660b"; @@ -61,8 +65,12 @@ vdd-supply = <®_touch_key>; }; +&vibrator { + status = "okay"; +}; + &msmgpio { - tkey_en_default: tkey-en-default { + tkey_en_default: tkey-en-default-state { pins = "gpio97"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi index 542010fdfb8a..c95f0b4bc61f 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi @@ -26,19 +26,6 @@ }; }; - reg_motor_vdd: regulator-motor-vdd { - compatible = "regulator-fixed"; - regulator-name = "motor_vdd"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - gpio = <&msmgpio 76 GPIO_ACTIVE_HIGH>; - enable-active-high; - - pinctrl-names = "default"; - pinctrl-0 = <&motor_en_default>; - }; - reg_touch_key: regulator-touch-key { compatible = "regulator-fixed"; regulator-name = "touch_key"; @@ -61,21 +48,18 @@ /delete-node/ magnetometer@12; }; +®_motor_vdd { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; +}; + &touchkey { vcc-supply = <®_touch_key>; vdd-supply = <®_touch_key>; }; &msmgpio { - motor_en_default: motor-en-default { - pins = "gpio76"; - function = "gpio"; - - drive-strength = <2>; - bias-disable; - }; - - tkey_en_default: tkey-en-default { + tkey_en_default: tkey-en-default-state { pins = "gpio97"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-grandmax.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-grandmax.dts index bc7134698978..a3d572d851ef 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-grandmax.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-grandmax.dts @@ -46,7 +46,7 @@ }; &msmgpio { - gpio_leds_default: gpio-led-default { + gpio_leds_default: gpio-led-default-state { pins = "gpio60"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-j5.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-j5.dts index eabeed18cfaa..7ac49a021563 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-j5.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-j5.dts @@ -199,7 +199,7 @@ }; &msmgpio { - gpio_keys_default: gpio-keys-default { + gpio_keys_default: gpio-keys-default-state { pins = "gpio107", "gpio109"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts index bbd6bb3f4fd7..d4984b3af802 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts @@ -1,5 +1,7 @@ // SPDX-License-Identifier: GPL-2.0-only -// Copyright (C) 2019 Stephan Gerhold +/* + * Copyright (C) 2019 Stephan Gerhold + */ /dts-v1/; @@ -422,7 +424,7 @@ }; &msmgpio { - fg_alert_default: fg-alert-default { + fg_alert_default: fg-alert-default-state { pins = "gpio121"; function = "gpio"; @@ -430,7 +432,7 @@ bias-disable; }; - gpio_keys_default: gpio-keys-default { + gpio_keys_default: gpio-keys-default-state { pins = "gpio107", "gpio109"; function = "gpio"; @@ -438,7 +440,7 @@ bias-pull-up; }; - gpio_hall_sensor_default: gpio-hall-sensor-default { + gpio_hall_sensor_default: gpio-hall-sensor-default-state { pins = "gpio52"; function = "gpio"; @@ -446,7 +448,7 @@ bias-disable; }; - imu_irq_default: imu-irq-default { + imu_irq_default: imu-irq-default-state { pins = "gpio115"; function = "gpio"; @@ -454,7 +456,7 @@ bias-disable; }; - muic_i2c_default: muic-i2c-default { + muic_i2c_default: muic-i2c-default-state { pins = "gpio105", "gpio106"; function = "gpio"; @@ -462,7 +464,7 @@ bias-disable; }; - muic_irq_default: muic-irq-default { + muic_irq_default: muic-irq-default-state { pins = "gpio12"; function = "gpio"; @@ -470,14 +472,15 @@ bias-disable; }; - nfc_default: nfc-default { - pins = "gpio20", "gpio49"; - function = "gpio"; - - drive-strength = <2>; - bias-disable; + nfc_default: nfc-default-state { + nfc-pins { + pins = "gpio20", "gpio49"; + function = "gpio"; - irq { + drive-strength = <2>; + bias-disable; + }; + irq-pins { pins = "gpio21"; function = "gpio"; @@ -486,7 +489,7 @@ }; }; - nfc_i2c_default: nfc-i2c-default { + nfc_i2c_default: nfc-i2c-default-state { pins = "gpio0", "gpio1"; function = "gpio"; @@ -494,7 +497,7 @@ bias-disable; }; - tkey_default: tkey-default { + tkey_default: tkey-default-state { pins = "gpio98"; function = "gpio"; @@ -502,7 +505,7 @@ bias-disable; }; - tkey_en_default: tkey-en-default { + tkey_en_default: tkey-en-default-state { pins = "gpio86"; function = "gpio"; @@ -510,7 +513,7 @@ bias-disable; }; - tkey_i2c_default: tkey-i2c-default { + tkey_i2c_default: tkey-i2c-default-state { pins = "gpio16", "gpio17"; function = "gpio"; @@ -518,7 +521,7 @@ bias-disable; }; - tkey_led_en_default: tkey-led-en-default { + tkey_led_en_default: tkey-led-en-default-state { pins = "gpio60"; function = "gpio"; @@ -526,7 +529,7 @@ bias-disable; }; - tsp_en_default: tsp-en-default { + tsp_en_default: tsp-en-default-state { pins = "gpio73"; function = "gpio"; @@ -534,7 +537,7 @@ bias-disable; }; - tsp_irq_default: tsp-irq-default { + tsp_irq_default: tsp-irq-default-state { pins = "gpio13"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts b/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts index 84a352dcf9a2..166bed05996f 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts @@ -1,5 +1,7 @@ // SPDX-License-Identifier: GPL-2.0-only -// Copyright (C) 2020 Stephan Gerhold +/* + * Copyright (C) 2020 Stephan Gerhold + */ /dts-v1/; @@ -272,7 +274,7 @@ }; &msmgpio { - gpio_keys_default: gpio-keys-default { + gpio_keys_default: gpio-keys-default-state { pins = "gpio107"; function = "gpio"; @@ -280,7 +282,7 @@ bias-pull-up; }; - imu_default: imu-default { + imu_default: imu-default-state { pins = "gpio115"; function = "gpio"; @@ -288,14 +290,15 @@ bias-disable; }; - touchscreen_default: touchscreen-default { - pins = "gpio13"; - function = "gpio"; - - drive-strength = <2>; - bias-pull-up; + touchscreen_default: touchscreen-default-state { + touchscreen-pins { + pins = "gpio13"; + function = "gpio"; - reset { + drive-strength = <2>; + bias-pull-up; + }; + reset-pins { pins = "gpio12"; function = "gpio"; @@ -304,7 +307,7 @@ }; }; - usb_id_default: usb-id-default { + usb_id_default: usb-id-default-state { pins = "gpio110"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi index a831064700ee..2ca8e977fc2a 100644 --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi @@ -1046,7 +1046,6 @@ "pixel", "core"; phys = <&dsi_phy0>; - phy-names = "dsi-phy"; #address-cells = <1>; #size-cells = <0>; @@ -1070,7 +1069,7 @@ }; }; - dsi_phy0: dsi-phy@1a98300 { + dsi_phy0: phy@1a98300 { compatible = "qcom,dsi-phy-28nm-lp"; reg = <0x01a98300 0xd4>, <0x01a98500 0x280>, @@ -1264,21 +1263,21 @@ clock-names = "iface", "bus"; qcom,iommu-secure-id = <17>; - // vfe: + /* VFE */ iommu-ctx@3000 { compatible = "qcom,msm-iommu-v1-sec"; reg = <0x3000 0x1000>; interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; }; - // mdp_0: + /* MDP_0 */ iommu-ctx@4000 { compatible = "qcom,msm-iommu-v1-ns"; reg = <0x4000 0x1000>; interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; }; - // venus_ns: + /* VENUS_NS */ iommu-ctx@5000 { compatible = "qcom,msm-iommu-v1-sec"; reg = <0x5000 0x1000>; @@ -1297,14 +1296,14 @@ clock-names = "iface", "bus"; qcom,iommu-secure-id = <18>; - // gfx3d_user: + /* GFX3D_USER */ iommu-ctx@1000 { compatible = "qcom,msm-iommu-v1-ns"; reg = <0x1000 0x1000>; interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>; }; - // gfx3d_priv: + /* GFX3D_PRIV */ iommu-ctx@2000 { compatible = "qcom,msm-iommu-v1-ns"; reg = <0x2000 0x1000>; @@ -1345,7 +1344,7 @@ }; mpss: remoteproc@4080000 { - compatible = "qcom,msm8916-mss-pil", "qcom,q6v5-pil"; + compatible = "qcom,msm8916-mss-pil"; reg = <0x04080000 0x100>, <0x04020000 0x040>; @@ -1438,7 +1437,7 @@ lpass: audio-controller@7708000 { status = "disabled"; - compatible = "qcom,lpass-cpu-apq8016"; + compatible = "qcom,apq8016-lpass-cpu"; /* * Note: Unlike the name would suggest, the SEC_I2S_CLK diff --git a/arch/arm64/boot/dts/qcom/msm8953.dtsi b/arch/arm64/boot/dts/qcom/msm8953.dtsi index 6b992a6d56c1..32349174c4bd 100644 --- a/arch/arm64/boot/dts/qcom/msm8953.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8953.dtsi @@ -460,229 +460,229 @@ interrupt-controller; #interrupt-cells = <2>; - uart_console_active: uart-console-active-pins { + uart_console_active: uart-console-active-state { pins = "gpio4", "gpio5"; function = "blsp_uart2"; drive-strength = <2>; bias-disable; }; - uart_console_sleep: uart-console-sleep-pins { + uart_console_sleep: uart-console-sleep-state { pins = "gpio4", "gpio5"; function = "blsp_uart2"; drive-strength = <2>; bias-pull-down; }; - sdc1_clk_on: sdc1-clk-on-pins { + sdc1_clk_on: sdc1-clk-on-state { pins = "sdc1_clk"; bias-disable; drive-strength = <16>; }; - sdc1_clk_off: sdc1-clk-off-pins { + sdc1_clk_off: sdc1-clk-off-state { pins = "sdc1_clk"; bias-disable; drive-strength = <2>; }; - sdc1_cmd_on: sdc1-cmd-on-pins { + sdc1_cmd_on: sdc1-cmd-on-state { pins = "sdc1_cmd"; bias-disable; drive-strength = <10>; }; - sdc1_cmd_off: sdc1-cmd-off-pins { + sdc1_cmd_off: sdc1-cmd-off-state { pins = "sdc1_cmd"; bias-disable; drive-strength = <2>; }; - sdc1_data_on: sdc1-data-on-pins { + sdc1_data_on: sdc1-data-on-state { pins = "sdc1_data"; bias-pull-up; drive-strength = <10>; }; - sdc1_data_off: sdc1-data-off-pins { + sdc1_data_off: sdc1-data-off-state { pins = "sdc1_data"; bias-pull-up; drive-strength = <2>; }; - sdc1_rclk_on: sdc1-rclk-on-pins { + sdc1_rclk_on: sdc1-rclk-on-state { pins = "sdc1_rclk"; bias-pull-down; }; - sdc1_rclk_off: sdc1-rclk-off-pins { + sdc1_rclk_off: sdc1-rclk-off-state { pins = "sdc1_rclk"; bias-pull-down; }; - sdc2_clk_on: sdc2-clk-on-pins { + sdc2_clk_on: sdc2-clk-on-state { pins = "sdc2_clk"; drive-strength = <16>; bias-disable; }; - sdc2_clk_off: sdc2-clk-off-pins { + sdc2_clk_off: sdc2-clk-off-state { pins = "sdc2_clk"; bias-disable; drive-strength = <2>; }; - sdc2_cmd_on: sdc2-cmd-on-pins { + sdc2_cmd_on: sdc2-cmd-on-state { pins = "sdc2_cmd"; bias-pull-up; drive-strength = <10>; }; - sdc2_cmd_off: sdc2-cmd-off-pins { + sdc2_cmd_off: sdc2-cmd-off-state { pins = "sdc2_cmd"; bias-pull-up; drive-strength = <2>; }; - sdc2_data_on: sdc2-data-on-pins { + sdc2_data_on: sdc2-data-on-state { pins = "sdc2_data"; bias-pull-up; drive-strength = <10>; }; - sdc2_data_off: sdc2-data-off-pins { + sdc2_data_off: sdc2-data-off-state { pins = "sdc2_data"; bias-pull-up; drive-strength = <2>; }; - sdc2_cd_on: cd-on-pins { + sdc2_cd_on: cd-on-state { pins = "gpio133"; function = "gpio"; drive-strength = <2>; bias-pull-up; }; - sdc2_cd_off: cd-off-pins { + sdc2_cd_off: cd-off-state { pins = "gpio133"; function = "gpio"; drive-strength = <2>; bias-disable; }; - gpio_key_default: gpio-key-default-pins { + gpio_key_default: gpio-key-default-state { pins = "gpio85"; function = "gpio"; drive-strength = <2>; bias-pull-up; }; - i2c_1_default: i2c-1-default-pins { + i2c_1_default: i2c-1-default-state { pins = "gpio2", "gpio3"; function = "blsp_i2c1"; drive-strength = <2>; bias-disable; }; - i2c_1_sleep: i2c-1-sleep-pins { + i2c_1_sleep: i2c-1-sleep-state { pins = "gpio2", "gpio3"; function = "gpio"; drive-strength = <2>; bias-disable; }; - i2c_2_default: i2c-2-default-pins { + i2c_2_default: i2c-2-default-state { pins = "gpio6", "gpio7"; function = "blsp_i2c2"; drive-strength = <2>; bias-disable; }; - i2c_2_sleep: i2c-2-sleep-pins { + i2c_2_sleep: i2c-2-sleep-state { pins = "gpio6", "gpio7"; function = "gpio"; drive-strength = <2>; bias-disable; }; - i2c_3_default: i2c-3-default-pins { + i2c_3_default: i2c-3-default-state { pins = "gpio10", "gpio11"; function = "blsp_i2c3"; drive-strength = <2>; bias-disable; }; - i2c_3_sleep: i2c-3-sleep-pins { + i2c_3_sleep: i2c-3-sleep-state { pins = "gpio10", "gpio11"; function = "gpio"; drive-strength = <2>; bias-disable; }; - i2c_4_default: i2c-4-default-pins { + i2c_4_default: i2c-4-default-state { pins = "gpio14", "gpio15"; function = "blsp_i2c4"; drive-strength = <2>; bias-disable; }; - i2c_4_sleep: i2c-4-sleep-pins { + i2c_4_sleep: i2c-4-sleep-state { pins = "gpio14", "gpio15"; function = "gpio"; drive-strength = <2>; bias-disable; }; - i2c_5_default: i2c-5-default-pins { + i2c_5_default: i2c-5-default-state { pins = "gpio18", "gpio19"; function = "blsp_i2c5"; drive-strength = <2>; bias-disable; }; - i2c_5_sleep: i2c-5-sleep-pins { + i2c_5_sleep: i2c-5-sleep-state { pins = "gpio18", "gpio19"; function = "gpio"; drive-strength = <2>; bias-disable; }; - i2c_6_default: i2c-6-default-pins { + i2c_6_default: i2c-6-default-state { pins = "gpio22", "gpio23"; function = "blsp_i2c6"; drive-strength = <2>; bias-disable; }; - i2c_6_sleep: i2c-6-sleep-pins { + i2c_6_sleep: i2c-6-sleep-state { pins = "gpio22", "gpio23"; function = "gpio"; drive-strength = <2>; bias-disable; }; - i2c_7_default: i2c-7-default-pins { + i2c_7_default: i2c-7-default-state { pins = "gpio135", "gpio136"; function = "blsp_i2c7"; drive-strength = <2>; bias-disable; }; - i2c_7_sleep: i2c-7-sleep-pins { + i2c_7_sleep: i2c-7-sleep-state { pins = "gpio135", "gpio136"; function = "gpio"; drive-strength = <2>; bias-disable; }; - i2c_8_default: i2c-8-default-pins { + i2c_8_default: i2c-8-default-state { pins = "gpio98", "gpio99"; function = "blsp_i2c8"; drive-strength = <2>; bias-disable; }; - i2c_8_sleep: i2c-8-sleep-pins { + i2c_8_sleep: i2c-8-sleep-state { pins = "gpio98", "gpio99"; function = "gpio"; drive-strength = <2>; @@ -726,6 +726,250 @@ reg = <0x193f044 0x4>; }; + mdss: mdss@1a00000 { + compatible = "qcom,mdss"; + + reg = <0x1a00000 0x1000>, + <0x1ab0000 0x1040>; + reg-names = "mdss_phys", + "vbif_phys"; + + power-domains = <&gcc MDSS_GDSC>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + + interrupt-controller; + #interrupt-cells = <1>; + + clocks = <&gcc GCC_MDSS_AHB_CLK>, + <&gcc GCC_MDSS_AXI_CLK>, + <&gcc GCC_MDSS_VSYNC_CLK>, + <&gcc GCC_MDSS_MDP_CLK>; + clock-names = "iface", + "bus", + "vsync", + "core"; + + #address-cells = <1>; + #size-cells = <1>; + ranges; + + status = "disabled"; + + mdp: mdp@1a01000 { + compatible = "qcom,msm8953-mdp5", "qcom,mdp5"; + reg = <0x1a01000 0x89000>; + reg-names = "mdp_phys"; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + power-domains = <&gcc MDSS_GDSC>; + + clocks = <&gcc GCC_MDSS_AHB_CLK>, + <&gcc GCC_MDSS_AXI_CLK>, + <&gcc GCC_MDSS_MDP_CLK>, + <&gcc GCC_MDSS_VSYNC_CLK>; + clock-names = "iface", + "bus", + "core", + "vsync"; + + iommus = <&apps_iommu 0x15>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdp5_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + mdp5_intf2_out: endpoint { + remote-endpoint = <&dsi1_in>; + }; + }; + }; + }; + + dsi0: dsi@1a94000 { + compatible = "qcom,mdss-dsi-ctrl"; + reg = <0x1a94000 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + assigned-clocks = <&gcc BYTE0_CLK_SRC>, + <&gcc PCLK0_CLK_SRC>; + assigned-clock-parents = <&dsi0_phy 0>, + <&dsi0_phy 1>; + + clocks = <&gcc GCC_MDSS_MDP_CLK>, + <&gcc GCC_MDSS_AHB_CLK>, + <&gcc GCC_MDSS_AXI_CLK>, + <&gcc GCC_MDSS_BYTE0_CLK>, + <&gcc GCC_MDSS_PCLK0_CLK>, + <&gcc GCC_MDSS_ESC0_CLK>; + clock-names = "mdp_core", + "iface", + "bus", + "byte", + "pixel", + "core"; + + phys = <&dsi0_phy>; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi0_in: endpoint { + remote-endpoint = <&mdp5_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + dsi0_out: endpoint { + }; + }; + }; + }; + + dsi0_phy: phy@1a94400 { + compatible = "qcom,dsi-phy-14nm-8953"; + reg = <0x1a94400 0x100>, + <0x1a94500 0x300>, + <0x1a94800 0x188>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&gcc GCC_MDSS_AHB_CLK>, <&xo_board>; + clock-names = "iface", "ref"; + + status = "disabled"; + }; + + dsi1: dsi@1a96000 { + compatible = "qcom,mdss-dsi-ctrl"; + reg = <0x1a96000 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <5>; + + assigned-clocks = <&gcc BYTE1_CLK_SRC>, + <&gcc PCLK1_CLK_SRC>; + assigned-clock-parents = <&dsi1_phy 0>, + <&dsi1_phy 1>; + + clocks = <&gcc GCC_MDSS_MDP_CLK>, + <&gcc GCC_MDSS_AHB_CLK>, + <&gcc GCC_MDSS_AXI_CLK>, + <&gcc GCC_MDSS_BYTE1_CLK>, + <&gcc GCC_MDSS_PCLK1_CLK>, + <&gcc GCC_MDSS_ESC1_CLK>; + clock-names = "mdp_core", + "iface", + "bus", + "byte", + "pixel", + "core"; + + phys = <&dsi1_phy>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi1_in: endpoint { + remote-endpoint = <&mdp5_intf2_out>; + }; + }; + + port@1 { + reg = <1>; + dsi1_out: endpoint { + }; + }; + }; + }; + + dsi1_phy: phy@1a96400 { + compatible = "qcom,dsi-phy-14nm-8953"; + reg = <0x1a96400 0x100>, + <0x1a96500 0x300>, + <0x1a96800 0x188>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&gcc GCC_MDSS_AHB_CLK>, <&xo_board>; + clock-names = "iface", "ref"; + + status = "disabled"; + }; + }; + + apps_iommu: iommu@1e00000 { + compatible = "qcom,msm8953-iommu", "qcom,msm-iommu-v1"; + ranges = <0 0x1e20000 0x20000>; + + clocks = <&gcc GCC_SMMU_CFG_CLK>, + <&gcc GCC_APSS_TCU_ASYNC_CLK>; + clock-names = "iface", "bus"; + + qcom,iommu-secure-id = <17>; + + #address-cells = <1>; + #iommu-cells = <1>; + #size-cells = <1>; + + /* VFE */ + iommu-ctx@14000 { + compatible = "qcom,msm-iommu-v1-ns"; + reg = <0x14000 0x1000>; + interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; + }; + + /* MDP_0 */ + iommu-ctx@15000 { + compatible = "qcom,msm-iommu-v1-ns"; + reg = <0x15000 0x1000>; + interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; + }; + + /* VENUS_NS */ + iommu-ctx@16000 { + compatible = "qcom,msm-iommu-v1-ns"; + reg = <0x16000 0x1000>; + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + spmi_bus: spmi@200f000 { compatible = "qcom,spmi-pmic-arb"; reg = <0x200f000 0x1000>, diff --git a/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead-rev-10.dts b/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead-rev-10.dts index 7e6bce4af441..4159fc35571a 100644 --- a/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead-rev-10.dts +++ b/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead-rev-10.dts @@ -1,5 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only -/* Copyright (c) Jean Thomas <virgule@jeanthomas.me> +/* + * Copyright (c) Jean Thomas <virgule@jeanthomas.me> */ /dts-v1/; diff --git a/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead-rev-101.dts b/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead-rev-101.dts index e6a5ebd30e2f..ad9702dd171b 100644 --- a/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead-rev-101.dts +++ b/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead-rev-101.dts @@ -1,5 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only -/* Copyright (c) Jean Thomas <virgule@jeanthomas.me> +/* + * Copyright (c) Jean Thomas <virgule@jeanthomas.me> */ /dts-v1/; diff --git a/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead.dtsi b/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead.dtsi index 71e373b11de9..87c90e93667f 100644 --- a/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead.dtsi @@ -1,5 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only -/* Copyright (c) 2015, LGE Inc. All rights reserved. +/* + * Copyright (c) 2015, LGE Inc. All rights reserved. * Copyright (c) 2016, The Linux Foundation. All rights reserved. * Copyright (c) 2021, Petr Vorel <petr.vorel@gmail.com> */ @@ -58,7 +59,7 @@ }; &rpm_requests { - pm8994_regulators: pm8994-regulators { + pm8994_regulators: regulators-0 { compatible = "qcom,rpm-pm8994-regulators"; vdd_l1-supply = <&pm8994_s1>; @@ -236,9 +237,11 @@ }; pm8994_l26: l26 { - /* TODO: value from downstream - regulator-min-microvolt = <987500>; - fails to apply */ + /* + * TODO: value from downstream + * regulator-min-microvolt = <987500>; + * fails to apply + */ }; pm8994_l27: l27 { @@ -252,19 +255,19 @@ }; pm8994_l29: l29 { - /* TODO: Unsupported voltage range. - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - qcom,init-voltage = <2800000>; - */ + /* + * TODO: Unsupported voltage range. + * regulator-min-microvolt = <2800000>; + * regulator-max-microvolt = <2800000>; + */ }; pm8994_l30: l30 { - /* TODO: get this verified - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - qcom,init-voltage = <1800000>; - */ + /* + * TODO: get this verified + * regulator-min-microvolt = <1800000>; + * regulator-max-microvolt = <1800000>; + */ }; pm8994_l31: l31 { @@ -273,15 +276,15 @@ }; pm8994_l32: l32 { - /* TODO: get this verified - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - qcom,init-voltage = <1800000>; - */ + /* + * TODO: get this verified + * regulator-min-microvolt = <1800000>; + * regulator-max-microvolt = <1800000>; + */ }; }; - pmi8994_regulators: pmi8994-regulators { + pmi8994_regulators: regulators-1 { compatible = "qcom,rpm-pmi8994-regulators"; vdd_s1-supply = <&vph_pwr>; diff --git a/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts b/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts index c4e87d0aec42..b242c272d2af 100644 --- a/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts +++ b/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts @@ -153,7 +153,7 @@ }; &rpm_requests { - pm8994-regulators { + regulators-0 { compatible = "qcom,rpm-pm8994-regulators"; vdd_l1-supply = <&pm8994_s7>; @@ -363,7 +363,7 @@ pm8994_lvs2: lvs2 {}; }; - pmi8994_regulators: pmi8994-regulators { + pmi8994_regulators: regulators-1 { compatible = "qcom,rpm-pmi8994-regulators"; vdd_s1-supply = <&vph_pwr>; vdd_bst_byp-supply = <&vph_pwr>; diff --git a/arch/arm64/boot/dts/qcom/msm8992.dtsi b/arch/arm64/boot/dts/qcom/msm8992.dtsi index 750643763a76..10adb4986ef1 100644 --- a/arch/arm64/boot/dts/qcom/msm8992.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8992.dtsi @@ -1,5 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only -/* Copyright (c) 2013-2016, The Linux Foundation. All rights reserved. +/* + * Copyright (c) 2013-2016, The Linux Foundation. All rights reserved. */ #include "msm8994.dtsi" diff --git a/arch/arm64/boot/dts/qcom/msm8994-huawei-angler-rev-101.dts b/arch/arm64/boot/dts/qcom/msm8994-huawei-angler-rev-101.dts index dbfbb77e9ff5..85abff0e9b3f 100644 --- a/arch/arm64/boot/dts/qcom/msm8994-huawei-angler-rev-101.dts +++ b/arch/arm64/boot/dts/qcom/msm8994-huawei-angler-rev-101.dts @@ -1,5 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only -/* Copyright (c) 2015, Huawei Inc. All rights reserved. +/* + * Copyright (c) 2015, Huawei Inc. All rights reserved. * Copyright (c) 2016, The Linux Foundation. All rights reserved. * Copyright (c) 2021-2022, Petr Vorel <petr.vorel@gmail.com> */ diff --git a/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi b/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi index f9d8bd09e074..9b67f0d3820c 100644 --- a/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi @@ -551,7 +551,7 @@ &rpm_requests { /* These values were taken from the original firmware ACPI tables */ - pm8994_regulators: pm8994-regulators { + pm8994_regulators: regulators-0 { compatible = "qcom,rpm-pm8994-regulators"; vdd_s1-supply = <&vph_pwr>; @@ -835,7 +835,7 @@ vreg_lvs2a_1p8: lvs2 { }; }; - pmi8994_regulators: pmi8994-regulators { + pmi8994_regulators: regulators-1 { compatible = "qcom,rpm-pmi8994-regulators"; vdd_s1-supply = <&vph_pwr>; @@ -881,28 +881,28 @@ }; &tlmm { - grip_default: grip-default { + grip_default: grip-default-state { pins = "gpio39"; function = "gpio"; drive-strength = <6>; bias-pull-down; }; - grip_sleep: grip-sleep { + grip_sleep: grip-sleep-state { pins = "gpio39"; function = "gpio"; drive-strength = <2>; bias-pull-down; }; - hall_front_default: hall-front-default { + hall_front_default: hall-front-default-state { pins = "gpio42"; function = "gpio"; drive-strength = <2>; bias-disable; }; - hall_back_default: hall-back-default { + hall_back_default: hall-back-default-state { pins = "gpio75"; function = "gpio"; drive-strength = <2>; diff --git a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi index ff60b7004d26..f3d153c34918 100644 --- a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi @@ -186,7 +186,7 @@ &rpm_requests { /* PMI8994 should probe first, because pmi8994_bby supplies some of PM8994's regulators */ - pmi8994_regulators: pmi8994-regulators { + pmi8994_regulators: regulators-0 { compatible = "qcom,rpm-pmi8994-regulators"; vdd_s1-supply = <&vph_pwr>; @@ -205,7 +205,7 @@ }; }; - pm8994_regulators: pm8994-regulators { + pm8994_regulators: regulators-1 { compatible = "qcom,rpm-pm8994-regulators"; vdd_s3-supply = <&vph_pwr>; @@ -477,15 +477,17 @@ }; &tlmm { - ts_int_active: ts-int-active { + ts_int_active: ts-int-active-state { pins = "gpio42"; + function = "gpio"; drive-strength = <2>; bias-disable; input-enable; }; - ts_reset_active: ts-reset-active { + ts_reset_active: ts-reset-active-state { pins = "gpio109"; + function = "gpio"; drive-strength = <2>; bias-disable; output-low; diff --git a/arch/arm64/boot/dts/qcom/msm8994.dtsi b/arch/arm64/boot/dts/qcom/msm8994.dtsi index ded5b7ceeaf9..adcea31a0c68 100644 --- a/arch/arm64/boot/dts/qcom/msm8994.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8994.dtsi @@ -1,5 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only -/* Copyright (c) 2013-2016, The Linux Foundation. All rights reserved. +/* + * Copyright (c) 2013-2016, The Linux Foundation. All rights reserved. */ #include <dt-bindings/interrupt-controller/arm-gic.h> @@ -773,254 +774,256 @@ interrupt-controller; #interrupt-cells = <2>; - blsp1_uart2_default: blsp1-uart2-default { - function = "blsp_uart2"; + blsp1_uart2_default: blsp1-uart2-default-state { pins = "gpio4", "gpio5"; + function = "blsp_uart2"; drive-strength = <16>; bias-disable; }; - blsp1_uart2_sleep: blsp1-uart2-sleep { - function = "gpio"; + blsp1_uart2_sleep: blsp1-uart2-sleep-state { pins = "gpio4", "gpio5"; + function = "gpio"; drive-strength = <2>; bias-pull-down; }; - blsp2_uart2_default: blsp2-uart2-default { + blsp2_uart2_default: blsp2-uart2-default-state { + pins = "gpio45", "gpio46", "gpio47", "gpio48"; function = "blsp_uart8"; - pins = "gpio45", "gpio46", - "gpio47", "gpio48"; drive-strength = <16>; bias-disable; }; - blsp2_uart2_sleep: blsp2-uart2-sleep { + blsp2_uart2_sleep: blsp2-uart2-sleep-state { + pins = "gpio45", "gpio46", "gpio47", "gpio48"; function = "gpio"; - pins = "gpio45", "gpio46", - "gpio47", "gpio48"; drive-strength = <2>; bias-disable; }; - i2c1_default: i2c1-default { - function = "blsp_i2c1"; + i2c1_default: i2c1-default-state { pins = "gpio2", "gpio3"; + function = "blsp_i2c1"; drive-strength = <2>; bias-disable; }; - i2c1_sleep: i2c1-sleep { - function = "gpio"; + i2c1_sleep: i2c1-sleep-state { pins = "gpio2", "gpio3"; + function = "gpio"; drive-strength = <2>; bias-disable; }; - i2c2_default: i2c2-default { - function = "blsp_i2c2"; + i2c2_default: i2c2-default-state { pins = "gpio6", "gpio7"; + function = "blsp_i2c2"; drive-strength = <2>; bias-disable; }; - i2c2_sleep: i2c2-sleep { - function = "gpio"; + i2c2_sleep: i2c2-sleep-state { pins = "gpio6", "gpio7"; + function = "gpio"; drive-strength = <2>; bias-disable; }; - i2c4_default: i2c4-default { - function = "blsp_i2c4"; + i2c4_default: i2c4-default-state { pins = "gpio19", "gpio20"; + function = "blsp_i2c4"; drive-strength = <2>; bias-disable; }; - i2c4_sleep: i2c4-sleep { - function = "gpio"; + i2c4_sleep: i2c4-sleep-state { pins = "gpio19", "gpio20"; + function = "gpio"; drive-strength = <2>; bias-pull-down; input-enable; }; - i2c5_default: i2c5-default { - function = "blsp_i2c5"; + i2c5_default: i2c5-default-state { pins = "gpio23", "gpio24"; + function = "blsp_i2c5"; drive-strength = <2>; bias-disable; }; - i2c5_sleep: i2c5-sleep { - function = "gpio"; + i2c5_sleep: i2c5-sleep-state { pins = "gpio23", "gpio24"; + function = "gpio"; drive-strength = <2>; bias-disable; }; - i2c6_default: i2c6-default { - function = "blsp_i2c6"; + i2c6_default: i2c6-default-state { pins = "gpio28", "gpio27"; + function = "blsp_i2c6"; drive-strength = <2>; bias-disable; }; - i2c6_sleep: i2c6-sleep { - function = "gpio"; + i2c6_sleep: i2c6-sleep-state { pins = "gpio28", "gpio27"; + function = "gpio"; drive-strength = <2>; bias-disable; }; - i2c7_default: i2c7-default { - function = "blsp_i2c7"; + i2c7_default: i2c7-default-state { pins = "gpio44", "gpio43"; + function = "blsp_i2c7"; drive-strength = <2>; bias-disable; }; - i2c7_sleep: i2c7-sleep { - function = "gpio"; + i2c7_sleep: i2c7-sleep-state { pins = "gpio44", "gpio43"; + function = "gpio"; drive-strength = <2>; bias-disable; }; - blsp2_spi10_default: blsp2-spi10-default { - default { - function = "blsp_spi10"; + blsp2_spi10_default: blsp2-spi10-default-state { + default-pins { pins = "gpio53", "gpio54", "gpio55"; + function = "blsp_spi10"; drive-strength = <10>; bias-pull-down; }; - cs { + + cs-pins { + pins = "gpio67"; function = "gpio"; - pins = "gpio55"; drive-strength = <2>; bias-disable; }; }; - blsp2_spi10_sleep: blsp2-spi10-sleep { + blsp2_spi10_sleep: blsp2-spi10-sleep-state { pins = "gpio53", "gpio54", "gpio55"; + function = "gpio"; drive-strength = <2>; bias-disable; }; - i2c11_default: i2c11-default { - function = "blsp_i2c11"; + i2c11_default: i2c11-default-state { pins = "gpio83", "gpio84"; + function = "blsp_i2c11"; drive-strength = <2>; bias-disable; }; - i2c11_sleep: i2c11-sleep { - function = "gpio"; + i2c11_sleep: i2c11-sleep-state { pins = "gpio83", "gpio84"; + function = "gpio"; drive-strength = <2>; bias-disable; }; - blsp1_spi1_default: blsp1-spi1-default { - default { - function = "blsp_spi1"; + blsp1_spi1_default: blsp1-spi1-default-state { + default-pins { pins = "gpio0", "gpio1", "gpio3"; + function = "blsp_spi1"; drive-strength = <10>; bias-pull-down; }; - cs { - function = "gpio"; + + cs-pins { pins = "gpio8"; + function = "gpio"; drive-strength = <2>; bias-disable; }; }; - blsp1_spi1_sleep: blsp1-spi1-sleep { + blsp1_spi1_sleep: blsp1-spi1-sleep-state { pins = "gpio0", "gpio1", "gpio3"; + function = "gpio"; drive-strength = <2>; bias-disable; }; - sdc1_clk_on: clk-on { + sdc1_clk_on: clk-on-state { pins = "sdc1_clk"; bias-disable; drive-strength = <16>; }; - sdc1_clk_off: clk-off { + sdc1_clk_off: clk-off-state { pins = "sdc1_clk"; bias-disable; drive-strength = <2>; }; - sdc1_cmd_on: cmd-on { + sdc1_cmd_on: cmd-on-state { pins = "sdc1_cmd"; bias-pull-up; drive-strength = <8>; }; - sdc1_cmd_off: cmd-off { + sdc1_cmd_off: cmd-off-state { pins = "sdc1_cmd"; bias-pull-up; drive-strength = <2>; }; - sdc1_data_on: data-on { + sdc1_data_on: data-on-state { pins = "sdc1_data"; bias-pull-up; drive-strength = <8>; }; - sdc1_data_off: data-off { + sdc1_data_off: data-off-state { pins = "sdc1_data"; bias-pull-up; drive-strength = <2>; }; - sdc1_rclk_on: rclk-on { + sdc1_rclk_on: rclk-on-state { pins = "sdc1_rclk"; bias-pull-down; }; - sdc1_rclk_off: rclk-off { + sdc1_rclk_off: rclk-off-state { pins = "sdc1_rclk"; bias-pull-down; }; - sdc2_clk_on: sdc2-clk-on { + sdc2_clk_on: sdc2-clk-on-state { pins = "sdc2_clk"; bias-disable; drive-strength = <10>; }; - sdc2_clk_off: sdc2-clk-off { + sdc2_clk_off: sdc2-clk-off-state { pins = "sdc2_clk"; bias-disable; drive-strength = <2>; }; - sdc2_cmd_on: sdc2-cmd-on { + sdc2_cmd_on: sdc2-cmd-on-state { pins = "sdc2_cmd"; bias-pull-up; drive-strength = <10>; }; - sdc2_cmd_off: sdc2-cmd-off { + sdc2_cmd_off: sdc2-cmd-off-state { pins = "sdc2_cmd"; bias-pull-up; drive-strength = <2>; }; - sdc2_data_on: sdc2-data-on { + sdc2_data_on: sdc2-data-on-state { pins = "sdc2_data"; bias-pull-up; drive-strength = <10>; }; - sdc2_data_off: sdc2-data-off { + sdc2_data_off: sdc2-data-off-state { pins = "sdc2_data"; bias-pull-up; drive-strength = <2>; diff --git a/arch/arm64/boot/dts/qcom/msm8996-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/msm8996-oneplus-common.dtsi new file mode 100644 index 000000000000..20f5c103c63b --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8996-oneplus-common.dtsi @@ -0,0 +1,787 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2022, Harry Austen <hpausten@protonmail.com> + */ + +#include "msm8996.dtsi" +#include "pm8994.dtsi" +#include "pmi8994.dtsi" +#include "pmi8996.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include <dt-bindings/sound/qcom,q6afe.h> +#include <dt-bindings/sound/qcom,q6asm.h> +#include <dt-bindings/sound/qcom,wcd9335.h> + +/ { + aliases { + serial0 = &blsp1_uart2; + serial1 = &blsp2_uart2; + }; + + battery: battery { + compatible = "simple-battery"; + + constant-charge-current-max-microamp = <3000000>; + voltage-min-design-microvolt = <3400000>; + }; + + chosen { + stdout-path = "serial1:115200n8"; + }; + + clocks { + div1_mclk: div1-clk { + compatible = "gpio-gate-clock"; + pinctrl-names = "default"; + pinctrl-0 = <&audio_mclk>; + #clock-cells = <0>; + clocks = <&rpmcc RPM_SMD_DIV_CLK1>; + enable-gpios = <&pm8994_gpios 15 GPIO_ACTIVE_HIGH>; + }; + + divclk4: div4-clk { + compatible = "fixed-clock"; + pinctrl-names = "default"; + pinctrl-0 = <&divclk4_pin_a>; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "divclk4"; + }; + }; + + reserved-memory { + ramoops@ac000000 { + compatible = "ramoops"; + reg = <0 0xac000000 0 0x200000>; + record-size = <0x20000>; + console-size = <0x100000>; + pmsg-size = <0x80000>; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + regulator-always-on; + regulator-boot-on; + }; + + wlan_en: wlan-en-regulator { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&wlan_en_gpios>; + regulator-name = "wlan-en-regulator"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&pm8994_gpios 8 GPIO_ACTIVE_HIGH>; + + /* WLAN card specific delay */ + startup-delay-us = <70000>; + enable-active-high; + }; +}; + +&adsp_pil { + status = "okay"; +}; + +&blsp1_i2c3 { + status = "okay"; + + tfa9890_amp: audio-codec@36 { + compatible = "nxp,tfa9890"; + reg = <0x36>; + #sound-dai-cells = <0>; + }; +}; + +&blsp1_i2c6 { + status = "okay"; + + bq27541: fuel-gauge@55 { + compatible = "ti,bq27541"; + reg = <0x55>; + }; +}; + +&blsp1_uart2 { + label = "BT-UART"; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "qcom,qca6174-bt"; + pinctrl-names = "default"; + pinctrl-0 = <&bt_en_gpios>; + enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>; + clocks = <&divclk4>; + }; +}; + +&blsp2_i2c1 { + status = "okay"; +}; + +&blsp2_i2c6 { + status = "okay"; + + synaptics_rmi4_i2c: touchscreen@20 { + compatible = "syna,rmi4-i2c"; + reg = <0x20>; + #address-cells = <1>; + #size-cells = <0>; + interrupts-extended = <&tlmm 125 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&touch_default>; + pinctrl-1 = <&touch_suspend>; + vdd-supply = <&vreg_l22a_3p0>; + vio-supply = <&vreg_s4a_1p8>; + syna,reset-delay-ms = <200>; + syna,startup-delay-ms = <200>; + + rmi4-f01@1 { + reg = <0x1>; + syna,nosleep-mode = <1>; + }; + + rmi4-f12@12 { + reg = <0x12>; + syna,sensor-type = <1>; + touchscreen-x-mm = <68>; + touchscreen-y-mm = <122>; + }; + }; +}; + +&blsp2_uart2 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_uart2_2pins_default>; + pinctrl-1 = <&blsp2_uart2_2pins_sleep>; + status = "okay"; +}; + +&camss { + vdda-supply = <&vreg_l2a_1p25>; +}; + +&dsi0 { + vdda-supply = <&vreg_l2a_1p25>; + vcca-supply = <&vreg_l22a_3p0>; + status = "okay"; +}; + +&dsi0_out { + data-lanes = <0 1 2 3>; +}; + +&dsi0_phy { + vdda-supply = <&vreg_l2a_1p25>; + vcca-supply = <&vreg_l28a_0p925>; + status = "okay"; +}; + +&gpu { + status = "okay"; +}; + +&hsusb_phy1 { + vdd-supply = <&vreg_l28a_0p925>; + vdda-pll-supply = <&vreg_l12a_1p8>; + vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; + status = "okay"; +}; + +&hsusb_phy2 { + vdd-supply = <&vreg_l28a_0p925>; + vdda-pll-supply = <&vreg_l12a_1p8>; + vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; + status = "okay"; +}; + +&mdp { + status = "okay"; +}; + +&mdss { + status = "okay"; +}; + +&mmcc { + vdd-gfx-supply = <&vdd_gfx>; +}; + +&mss_pil { + pll-supply = <&vreg_l12a_1p8>; + status = "okay"; +}; + +&pcie0 { + perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>; + vddpe-3v3-supply = <&wlan_en>; + vdda-supply = <&vreg_l28a_0p925>; + status = "okay"; +}; + +&pcie_phy { + vdda-phy-supply = <&vreg_l28a_0p925>; + vdda-pll-supply = <&vreg_l12a_1p8>; + status = "okay"; +}; + +&pm8994_gpios { + bt_en_gpios: bt-en-gpios-state { + pins = "gpio19"; + function = PMIC_GPIO_FUNC_NORMAL; + output-low; + power-source = <PM8994_GPIO_S4>; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; + bias-pull-down; + }; + + wlan_en_gpios: wlan-en-gpios-state { + pins = "gpio8"; + function = PMIC_GPIO_FUNC_NORMAL; + output-low; + power-source = <PM8994_GPIO_S4>; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; + bias-pull-down; + }; + + audio_mclk: divclk1-state { + pins = "gpio15"; + function = PMIC_GPIO_FUNC_FUNC1; + power-source = <PM8994_GPIO_S4>; + }; + + divclk4_pin_a: divclk4-state { + pins = "gpio18"; + function = PMIC_GPIO_FUNC_FUNC2; + bias-disable; + power-source = <PM8994_GPIO_S4>; + }; +}; + +&pm8994_spmi_regulators { + qcom,saw-reg = <&saw3>; + + s9 { + qcom,saw-slave; + }; + + s10 { + qcom,saw-slave; + }; + + s11 { + qcom,saw-leader; + regulator-min-microvolt = <1140000>; + regulator-max-microvolt = <1140000>; + regulator-max-step-microvolt = <150000>; + regulator-always-on; + }; +}; + +&pmi8994_spmi_regulators { + vdd_gfx: s2 { + regulator-name = "vdd-gfx"; + regulator-min-microvolt = <980000>; + regulator-max-microvolt = <1230000>; + }; +}; + +&q6asmdai { + #address-cells = <1>; + #size-cells = <0>; + + dai@0 { + reg = <0>; + }; + + dai@1 { + reg = <1>; + }; + + dai@2 { + reg = <2>; + }; +}; + +&rpm_requests { + regulators { + compatible = "qcom,rpm-pm8994-regulators"; + + vreg_s3a_1p3: s3 { + regulator-name = "vreg_s3a_1p3"; + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + }; + + vreg_s4a_1p8: s4 { + regulator-name = "vreg_s4a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vreg_s5a_2p15: s5 { + regulator-name = "vreg_s5a_2p15"; + regulator-min-microvolt = <2150000>; + regulator-max-microvolt = <2150000>; + }; + + vreg_s7a_0p8: s7 { + regulator-name = "vreg_s7a_0p8"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + }; + + vreg_l1a_1p0: l1 { + regulator-name = "vreg_l1a_1p0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + vreg_l2a_1p25: l2 { + regulator-name = "vreg_l2a_1p25"; + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + regulator-allow-set-load; + }; + + vreg_l3a_1p1: l3 { + regulator-name = "vreg_l3a_1p1"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + }; + + vreg_l4a_1p225: l4 { + regulator-name = "vreg_l4a_1p225"; + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + vreg_l6a_1p2: l6 { + regulator-name = "vreg_l6a_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + vreg_l7a_1p8: l7 { + regulator-name = "vreg_l7a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_l9a_1p8: l9 { + regulator-name = "vreg_l9a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_l10a_1p8: l10 { + regulator-name = "vreg_l10a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_l11a_1p15: l11 { + regulator-name = "vreg_l11a_1p15"; + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + }; + + vreg_l12a_1p8: l12 { + regulator-name = "vreg_l12a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-allow-set-load; + }; + + vreg_l13a_2p95: l13 { + regulator-name = "vreg_l13a_2p95"; + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + }; + + vreg_l16a_2p7: l16 { + regulator-name = "vreg_l16a_2p7"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + vreg_l17a_2p6: l17 { + regulator-name = "vreg_l17a_2p6"; + regulator-min-microvolt = <2600000>; + regulator-max-microvolt = <2600000>; + }; + + vreg_l18a_3p3: l18 { + regulator-name = "vreg_l18a_3p3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vreg_l19a_3p0: l19 { + regulator-name = "vreg_l19a_3p0"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + vreg_l20a_2p95: l20 { + regulator-name = "vreg_l20a_2p95"; + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + }; + + vreg_l21a_2p95: l21 { + regulator-name = "vreg_l21a_2p95"; + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + regulator-system-load = <200000>; + }; + + vreg_l22a_3p0: l22 { + regulator-name = "vreg_l22a_3p0"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + }; + + vreg_l23a_2p8: l23 { + regulator-name = "vreg_l23a_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + vreg_l24a_3p075: l24 { + regulator-name = "vreg_l24a_3p075"; + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + vreg_l25a_1p2: l25 { + regulator-name = "vreg_l25a_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-allow-set-load; + regulator-always-on; + }; + + vreg_l27a_1p2: l27 { + regulator-name = "vreg_l27a_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + vreg_l28a_0p925: l28 { + regulator-name = "vreg_l28a_0p925"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <925000>; + regulator-allow-set-load; + }; + + vreg_l29a_2p8: l29 { + regulator-name = "vreg_l29a_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + vreg_l30a_1p8: l30 { + regulator-name = "vreg_l30a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_l32a_1p8: l32 { + regulator-name = "vreg_l32a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + }; +}; + +&slpi_pil { + status = "okay"; +}; + +&sound { + compatible = "qcom,apq8096-sndcard"; + model = "OnePlus3"; + audio-routing = "RX_BIAS", "MCLK", + "AMIC2", "MIC BIAS2", + "MIC BIAS2", "Headset Mic", + "AMIC4", "MIC BIAS1", + "MIC BIAS1", "Primary Mic", + "AMIC5", "MIC BIAS3", + "MIC BIAS3", "Noise Mic"; + + mm1-dai-link { + link-name = "MultiMedia1"; + + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>; + }; + }; + + mm2-dai-link { + link-name = "MultiMedia2"; + + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>; + }; + }; + + mm3-dai-link { + link-name = "MultiMedia3"; + + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>; + }; + }; + + mm4-dai-link { + link-name = "MultiMedia4"; + + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA4>; + }; + }; + + mm5-dai-link { + link-name = "MultiMedia5"; + + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA5>; + }; + }; + + mm6-dai-link { + link-name = "MultiMedia6"; + + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA6>; + }; + }; + + mm7-dai-link { + link-name = "MultiMedia7"; + + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA7>; + }; + }; + + mm8-dai-link { + link-name = "MultiMedia8"; + + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA8>; + }; + }; + + mm9-dai-link { + link-name = "MultiMedia9"; + + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA9>; + }; + }; + + mm10-dai-link { + link-name = "MultiMedia10"; + + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA10>; + }; + }; + + mm11-dai-link { + link-name = "MultiMedia11"; + + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA11>; + }; + }; + + mm12-dai-link { + link-name = "MultiMedia12"; + + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA12>; + }; + }; + + mm13-dai-link { + link-name = "MultiMedia13"; + + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA13>; + }; + }; + + mm14-dai-link { + link-name = "MultiMedia14"; + + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA14>; + }; + }; + + mm15-dai-link { + link-name = "MultiMedia15"; + + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA15>; + }; + }; + + mm16-dai-link { + link-name = "MultiMedia16"; + + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA16>; + }; + }; + + slim-dai-link { + link-name = "SLIM Playback"; + + cpu { + sound-dai = <&q6afedai SLIMBUS_6_RX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&wcd9335 AIF4_PB>; + }; + }; + + slimcap-dai-link { + link-name = "SLIM Capture"; + + cpu { + sound-dai = <&q6afedai SLIMBUS_0_TX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&wcd9335 AIF1_CAP>; + }; + }; + + speaker-dai-link { + link-name = "Speaker"; + + cpu { + sound-dai = <&q6afedai QUATERNARY_MI2S_RX>; + }; + + codec { + sound-dai = <&tfa9890_amp>; + }; + }; +}; + +&tlmm { + gpio-reserved-ranges = <81 4>; + + mdss_dsi_active: mdss-dsi-active-state { + pins = "gpio8"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + + mdss_dsi_suspend: mdss-dsi-suspend-state { + pins = "gpio8"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + mdss_te_active: mdss-te-active-state { + pins = "gpio10"; + function = "mdp_vsync"; + drive-strength = <2>; + bias-pull-down; + }; + + mdss_te_suspend: mdss-te-suspend-state { + pins = "gpio10"; + function = "mdp_vsync"; + drive-strength = <2>; + bias-pull-down; + }; + + touch_default: touch-default-state { + pins = "gpio89", "gpio125", "gpio49"; + function = "gpio"; + drive-strength = <16>; + bias-pull-up; + }; + + touch_suspend: touch-suspend-state { + pins = "gpio89", "gpio125", "gpio49"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; +}; + +&ufsphy { + vdda-phy-supply = <&vreg_l28a_0p925>; + vdda-pll-supply = <&vreg_l12a_1p8>; + vddp-ref-clk-supply = <&vreg_l25a_1p2>; + + status = "okay"; +}; + +&ufshc { + vcc-supply = <&vreg_l20a_2p95>; + vccq-supply = <&vreg_l25a_1p2>; + vccq2-supply = <&vreg_s4a_1p8>; + + vcc-max-microamp = <600000>; + vccq-max-microamp = <450000>; + vccq2-max-microamp = <450000>; + + status = "okay"; +}; + +&usb3 { + status = "okay"; +}; + +&usb3_dwc3 { + phys = <&hsusb_phy1>; + phy-names = "usb2-phy"; + + maximum-speed = "high-speed"; +}; + +&venus { + status = "okay"; +}; + +&wcd9335 { + clock-names = "mclk", "slimbus"; + clocks = <&div1_mclk>, + <&rpmcc RPM_SMD_BB_CLK1>; + + vdd-buck-supply = <&vreg_s4a_1p8>; + vdd-buck-sido-supply = <&vreg_s4a_1p8>; + vdd-tx-supply = <&vreg_s4a_1p8>; + vdd-rx-supply = <&vreg_s4a_1p8>; + vdd-io-supply = <&vreg_s4a_1p8>; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8996-oneplus3.dts b/arch/arm64/boot/dts/qcom/msm8996-oneplus3.dts new file mode 100644 index 000000000000..1bdc1b134305 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8996-oneplus3.dts @@ -0,0 +1,44 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2022, Harry Austen <hpausten@protonmail.com> + */ + +/dts-v1/; + +#include "msm8996-oneplus-common.dtsi" + +/ { + model = "OnePlus 3"; + compatible = "oneplus,oneplus3", "qcom,msm8996"; + chassis-type = "handset"; + qcom,board-id = <8 0 15801 15>, <8 0 15801 16>; + qcom,msm-id = <246 0x30001>; +}; + +&adsp_pil { + firmware-name = "qcom/msm8996/oneplus3/adsp.mbn"; +}; + +&battery { + charge-full-design-microamp-hours = <3000000>; + voltage-max-design-microvolt = <4350000>; +}; + +&gpu { + zap-shader { + firmware-name = "qcom/msm8996/oneplus3/a530_zap.mbn"; + }; +}; + +&mss_pil { + firmware-name = "qcom/msm8996/oneplus3/mba.mbn", + "qcom/msm8996/oneplus3/modem.mbn"; +}; + +&slpi_pil { + firmware-name = "qcom/msm8996/oneplus3/slpi.mbn"; +}; + +&venus { + firmware-name = "qcom/msm8996/oneplus3/venus.mbn"; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8996-oneplus3t.dts b/arch/arm64/boot/dts/qcom/msm8996-oneplus3t.dts new file mode 100644 index 000000000000..34f837dd0c12 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8996-oneplus3t.dts @@ -0,0 +1,45 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2022, Harry Austen <hpausten@protonmail.com> + */ + +/dts-v1/; + +#include "msm8996-oneplus-common.dtsi" + +/ { + model = "OnePlus 3T"; + compatible = "oneplus,oneplus3t", "qcom,msm8996"; + chassis-type = "handset"; + qcom,board-id = <8 0 15811 26>, + <8 0 15811 27>, + <8 0 15811 28>; +}; + +&adsp_pil { + firmware-name = "qcom/msm8996/oneplus3t/adsp.mbn"; +}; + +&battery { + charge-full-design-microamp-hours = <3400000>; + voltage-max-design-microvolt = <4400000>; +}; + +&gpu { + zap-shader { + firmware-name = "qcom/msm8996/oneplus3t/a530_zap.mbn"; + }; +}; + +&mss_pil { + firmware-name = "qcom/msm8996/oneplus3t/mba.mbn", + "qcom/msm8996/oneplus3t/modem.mbn"; +}; + +&slpi_pil { + firmware-name = "qcom/msm8996/oneplus3t/slpi.mbn"; +}; + +&venus { + firmware-name = "qcom/msm8996/oneplus3t/venus.mbn"; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi index ca7c8d2e1d3d..dec361b93cce 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi @@ -629,7 +629,7 @@ }; &rpm_requests { - pm8994-regulators { + regulators-0 { compatible = "qcom,rpm-pm8994-regulators"; vdd_s1-supply = <&vph_pwr>; @@ -847,28 +847,28 @@ pinctrl-0 = <&sw_service_gpio>; pinctrl-names = "default"; - disp_reset_n_gpio: disp-reset-n { + disp_reset_n_gpio: disp-reset-n-state { pins = "gpio8"; function = "gpio"; drive-strength = <2>; bias-disable; }; - mdp_vsync_p_gpio: mdp-vsync-p { + mdp_vsync_p_gpio: mdp-vsync-p-state { pins = "gpio10"; function = "mdp_vsync"; drive-strength = <2>; bias-disable; }; - sw_service_gpio: sw-service-gpio { + sw_service_gpio: sw-service-gpio-state { pins = "gpio16"; function = "gpio"; drive-strength = <2>; bias-pull-up; }; - usb_detect: usb-detect { + usb_detect: usb-detect-state { pins = "gpio25"; function = "gpio"; drive-strength = <2>; @@ -876,7 +876,7 @@ output-high; }; - uim_detect_en: uim-detect-en { + uim_detect_en: uim-detect-en-state { pins = "gpio29"; function = "gpio"; drive-strength = <2>; @@ -884,14 +884,14 @@ output-high; }; - tray_det_pin: tray-det { + tray_det_pin: tray-det-state { pins = "gpio40"; function = "gpio"; drive-strength = <2>; bias-disable; }; - tp_vddio_en: tp-vddio-en { + tp_vddio_en: tp-vddio-en-state { pins = "gpio50"; function = "gpio"; drive-strength = <2>; @@ -899,7 +899,7 @@ output-high; }; - lcd_vddio_en: lcd-vddio-en { + lcd_vddio_en: lcd-vddio-en-state { pins = "gpio51"; function = "gpio"; drive-strength = <2>; @@ -907,15 +907,14 @@ output-low; }; - wl_host_wake: wl-host-wake { + wl_host_wake: wl-host-wake-state { pins = "gpio79"; function = "gpio"; drive-strength = <2>; bias-pull-down; - input-high; }; - wl_reg_on: wl-reg-on { + wl_reg_on: wl-reg-on-state { pins = "gpio84"; function = "gpio"; drive-strength = <2>; @@ -923,20 +922,20 @@ output-low; }; - ts_reset_n: ts-rst-n { + ts_reset_n: ts-rst-n-state { pins = "gpio89"; function = "gpio"; drive-strength = <2>; }; - touch_int_n: touch-int-n { + touch_int_n: touch-int-n-state { pins = "gpio125"; function = "gpio"; drive-strength = <2>; bias-pull-up; }; - touch_int_sleep: touch-int-sleep { + touch_int_sleep: touch-int-sleep-state { pins = "gpio125"; function = "gpio"; drive-strength = <2>; diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi index 77819186086a..5b47b8de69da 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi @@ -3,9 +3,6 @@ * Copyright (c) 2020, Yassine Oudjana <y.oudjana@protonmail.com> */ -/dts-v1/; - -#include "msm8996.dtsi" #include "pm8994.dtsi" #include "pmi8994.dtsi" #include <dt-bindings/input/input.h> @@ -413,7 +410,7 @@ }; &rpm_requests { - pm8994-regulators { + regulators-0 { compatible = "qcom,rpm-pm8994-regulators"; vdd_s1-supply = <&vph_pwr>; @@ -598,7 +595,7 @@ }; }; - pmi8994-regulators { + regulators-1 { compatible = "qcom,rpm-pmi8994-regulators"; vdd_s1-supply = <&vph_pwr>; @@ -694,35 +691,35 @@ }; &tlmm { - mdss_dsi_default: mdss_dsi_default { + mdss_dsi_default: mdss-dsi-default-state { pins = "gpio8"; function = "gpio"; drive-strength = <8>; bias-disable; }; - mdss_dsi_sleep: mdss_dsi_sleep { + mdss_dsi_sleep: mdss-dsi-sleep-state { pins = "gpio8"; function = "gpio"; drive-strength = <2>; bias-pull-down; }; - mdss_te_default: mdss_te_default { + mdss_te_default: mdss-te-default-state { pins = "gpio10"; function = "mdp_vsync"; drive-strength = <2>; bias-pull-down; }; - mdss_te_sleep: mdss_te_sleep { + mdss_te_sleep: mdss-te-sleep-state { pins = "gpio10"; function = "mdp_vsync"; drive-strength = <2>; bias-pull-down; }; - nfc_default: nfc_default { + nfc_default: nfc-default-state { pins = "gpio12", "gpio21"; function = "gpio"; drive-strength = <16>; diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts index 4e5264f4116a..d8734913482f 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts +++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts @@ -5,6 +5,7 @@ /dts-v1/; +#include "msm8996.dtsi" #include "msm8996-xiaomi-common.dtsi" #include <dt-bindings/sound/qcom,q6afe.h> #include <dt-bindings/sound/qcom,q6asm.h> @@ -219,7 +220,7 @@ }; &rpm_requests { - pm8994-regulators { + regulators-0 { vreg_l17a_2p8: l17 { regulator-name = "vreg_l17a_2p8"; regulator-min-microvolt = <2500000>; @@ -445,28 +446,28 @@ "RFFE1_DATA", /* GPIO_148 */ "RFFE1_CLK"; /* GPIO_149 */ - touchscreen_default: touchscreen_default { + touchscreen_default: touchscreen-default-state { pins = "gpio89", "gpio125"; function = "gpio"; drive-strength = <10>; bias-pull-up; }; - touchscreen_sleep: touchscreen_sleep { + touchscreen_sleep: touchscreen-sleep-state { pins = "gpio89", "gpio125"; function = "gpio"; drive-strength = <2>; bias-disable; }; - vibrator_default: vibrator_default { + vibrator_default: vibrator-default-state { pins = "gpio93"; function = "gpio"; drive-strength = <8>; bias-pull-up; }; - vibrator_sleep: vibrator_sleep { + vibrator_sleep: vibrator-sleep-state { pins = "gpio93"; function = "gpio"; drive-strength = <2>; diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index c0a2baffa49d..1e976dcb416d 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -1,5 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only -/* Copyright (c) 2014-2015, The Linux Foundation. All rights reserved. +/* + * Copyright (c) 2014-2015, The Linux Foundation. All rights reserved. */ #include <dt-bindings/interrupt-controller/arm-gic.h> @@ -144,82 +145,92 @@ /* Nominal fmax for now */ opp-307200000 { opp-hz = /bits/ 64 <307200000>; - opp-supported-hw = <0x77>; + opp-supported-hw = <0xf>; clock-latency-ns = <200000>; }; opp-422400000 { opp-hz = /bits/ 64 <422400000>; - opp-supported-hw = <0x77>; + opp-supported-hw = <0xf>; clock-latency-ns = <200000>; }; opp-480000000 { opp-hz = /bits/ 64 <480000000>; - opp-supported-hw = <0x77>; + opp-supported-hw = <0xf>; clock-latency-ns = <200000>; }; opp-556800000 { opp-hz = /bits/ 64 <556800000>; - opp-supported-hw = <0x77>; + opp-supported-hw = <0xf>; clock-latency-ns = <200000>; }; opp-652800000 { opp-hz = /bits/ 64 <652800000>; - opp-supported-hw = <0x77>; + opp-supported-hw = <0xf>; clock-latency-ns = <200000>; }; opp-729600000 { opp-hz = /bits/ 64 <729600000>; - opp-supported-hw = <0x77>; + opp-supported-hw = <0xf>; clock-latency-ns = <200000>; }; opp-844800000 { opp-hz = /bits/ 64 <844800000>; - opp-supported-hw = <0x77>; + opp-supported-hw = <0xf>; clock-latency-ns = <200000>; }; opp-960000000 { opp-hz = /bits/ 64 <960000000>; - opp-supported-hw = <0x77>; + opp-supported-hw = <0xf>; clock-latency-ns = <200000>; }; opp-1036800000 { opp-hz = /bits/ 64 <1036800000>; - opp-supported-hw = <0x77>; + opp-supported-hw = <0xf>; clock-latency-ns = <200000>; }; opp-1113600000 { opp-hz = /bits/ 64 <1113600000>; - opp-supported-hw = <0x77>; + opp-supported-hw = <0xf>; clock-latency-ns = <200000>; }; opp-1190400000 { opp-hz = /bits/ 64 <1190400000>; - opp-supported-hw = <0x77>; + opp-supported-hw = <0xf>; clock-latency-ns = <200000>; }; opp-1228800000 { opp-hz = /bits/ 64 <1228800000>; - opp-supported-hw = <0x77>; + opp-supported-hw = <0xf>; clock-latency-ns = <200000>; }; opp-1324800000 { opp-hz = /bits/ 64 <1324800000>; - opp-supported-hw = <0x77>; + opp-supported-hw = <0xd>; + clock-latency-ns = <200000>; + }; + opp-1363200000 { + opp-hz = /bits/ 64 <1363200000>; + opp-supported-hw = <0x2>; clock-latency-ns = <200000>; }; opp-1401600000 { opp-hz = /bits/ 64 <1401600000>; - opp-supported-hw = <0x77>; + opp-supported-hw = <0xd>; clock-latency-ns = <200000>; }; opp-1478400000 { opp-hz = /bits/ 64 <1478400000>; - opp-supported-hw = <0x77>; + opp-supported-hw = <0x9>; + clock-latency-ns = <200000>; + }; + opp-1497600000 { + opp-hz = /bits/ 64 <1497600000>; + opp-supported-hw = <0x04>; clock-latency-ns = <200000>; }; opp-1593600000 { opp-hz = /bits/ 64 <1593600000>; - opp-supported-hw = <0x77>; + opp-supported-hw = <0x9>; clock-latency-ns = <200000>; }; }; @@ -232,127 +243,137 @@ /* Nominal fmax for now */ opp-307200000 { opp-hz = /bits/ 64 <307200000>; - opp-supported-hw = <0x77>; + opp-supported-hw = <0xf>; clock-latency-ns = <200000>; }; opp-403200000 { opp-hz = /bits/ 64 <403200000>; - opp-supported-hw = <0x77>; + opp-supported-hw = <0xf>; clock-latency-ns = <200000>; }; opp-480000000 { opp-hz = /bits/ 64 <480000000>; - opp-supported-hw = <0x77>; + opp-supported-hw = <0xf>; clock-latency-ns = <200000>; }; opp-556800000 { opp-hz = /bits/ 64 <556800000>; - opp-supported-hw = <0x77>; + opp-supported-hw = <0xf>; clock-latency-ns = <200000>; }; opp-652800000 { opp-hz = /bits/ 64 <652800000>; - opp-supported-hw = <0x77>; + opp-supported-hw = <0xf>; clock-latency-ns = <200000>; }; opp-729600000 { opp-hz = /bits/ 64 <729600000>; - opp-supported-hw = <0x77>; + opp-supported-hw = <0xf>; clock-latency-ns = <200000>; }; opp-806400000 { opp-hz = /bits/ 64 <806400000>; - opp-supported-hw = <0x77>; + opp-supported-hw = <0xf>; clock-latency-ns = <200000>; }; opp-883200000 { opp-hz = /bits/ 64 <883200000>; - opp-supported-hw = <0x77>; + opp-supported-hw = <0xf>; clock-latency-ns = <200000>; }; opp-940800000 { opp-hz = /bits/ 64 <940800000>; - opp-supported-hw = <0x77>; + opp-supported-hw = <0xf>; clock-latency-ns = <200000>; }; opp-1036800000 { opp-hz = /bits/ 64 <1036800000>; - opp-supported-hw = <0x77>; + opp-supported-hw = <0xf>; clock-latency-ns = <200000>; }; opp-1113600000 { opp-hz = /bits/ 64 <1113600000>; - opp-supported-hw = <0x77>; + opp-supported-hw = <0xf>; clock-latency-ns = <200000>; }; opp-1190400000 { opp-hz = /bits/ 64 <1190400000>; - opp-supported-hw = <0x77>; + opp-supported-hw = <0xf>; clock-latency-ns = <200000>; }; opp-1248000000 { opp-hz = /bits/ 64 <1248000000>; - opp-supported-hw = <0x77>; + opp-supported-hw = <0xf>; clock-latency-ns = <200000>; }; opp-1324800000 { opp-hz = /bits/ 64 <1324800000>; - opp-supported-hw = <0x77>; + opp-supported-hw = <0xf>; clock-latency-ns = <200000>; }; opp-1401600000 { opp-hz = /bits/ 64 <1401600000>; - opp-supported-hw = <0x77>; + opp-supported-hw = <0xf>; clock-latency-ns = <200000>; }; opp-1478400000 { opp-hz = /bits/ 64 <1478400000>; - opp-supported-hw = <0x77>; + opp-supported-hw = <0xf>; clock-latency-ns = <200000>; }; opp-1555200000 { opp-hz = /bits/ 64 <1555200000>; - opp-supported-hw = <0x77>; + opp-supported-hw = <0xf>; clock-latency-ns = <200000>; }; opp-1632000000 { opp-hz = /bits/ 64 <1632000000>; - opp-supported-hw = <0x77>; + opp-supported-hw = <0xf>; clock-latency-ns = <200000>; }; opp-1708800000 { opp-hz = /bits/ 64 <1708800000>; - opp-supported-hw = <0x77>; + opp-supported-hw = <0xf>; clock-latency-ns = <200000>; }; opp-1785600000 { opp-hz = /bits/ 64 <1785600000>; - opp-supported-hw = <0x77>; + opp-supported-hw = <0xf>; + clock-latency-ns = <200000>; + }; + opp-1804800000 { + opp-hz = /bits/ 64 <1804800000>; + opp-supported-hw = <0xe>; clock-latency-ns = <200000>; }; opp-1824000000 { opp-hz = /bits/ 64 <1824000000>; - opp-supported-hw = <0x77>; + opp-supported-hw = <0x1>; + clock-latency-ns = <200000>; + }; + opp-1900800000 { + opp-hz = /bits/ 64 <1900800000>; + opp-supported-hw = <0x4>; clock-latency-ns = <200000>; }; opp-1920000000 { opp-hz = /bits/ 64 <1920000000>; - opp-supported-hw = <0x77>; + opp-supported-hw = <0x1>; clock-latency-ns = <200000>; }; opp-1996800000 { opp-hz = /bits/ 64 <1996800000>; - opp-supported-hw = <0x77>; + opp-supported-hw = <0x1>; clock-latency-ns = <200000>; }; opp-2073600000 { opp-hz = /bits/ 64 <2073600000>; - opp-supported-hw = <0x77>; + opp-supported-hw = <0x1>; clock-latency-ns = <200000>; }; opp-2150400000 { opp-hz = /bits/ 64 <2150400000>; - opp-supported-hw = <0x77>; + opp-supported-hw = <0x1>; clock-latency-ns = <200000>; }; }; @@ -860,9 +881,9 @@ <&gcc GPLL0>, <&dsi0_phy 1>, <&dsi0_phy 0>, - <0>, - <0>, - <0>; + <&dsi1_phy 1>, + <&dsi1_phy 0>, + <&hdmi_phy>; clock-names = "xo", "gcc_mmss_noc_cfg_ahb_clk", "gpll0", @@ -993,7 +1014,6 @@ assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>; phys = <&dsi0_phy>; - phy-names = "dsi"; status = "disabled"; #address-cells = <1>; @@ -1018,7 +1038,7 @@ }; }; - dsi0_phy: dsi-phy@994400 { + dsi0_phy: phy@994400 { compatible = "qcom,dsi-phy-14nm"; reg = <0x00994400 0x100>, <0x00994500 0x300>, @@ -1061,7 +1081,6 @@ assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>; phys = <&dsi1_phy>; - phy-names = "dsi"; status = "disabled"; #address-cells = <1>; @@ -1086,7 +1105,7 @@ }; }; - dsi1_phy: dsi-phy@996400 { + dsi1_phy: phy@996400 { compatible = "qcom,dsi-phy-14nm"; reg = <0x00996400 0x100>, <0x00996500 0x300>, @@ -1145,7 +1164,7 @@ }; }; - hdmi_phy: hdmi-phy@9a0600 { + hdmi_phy: phy@9a0600 { #phy-cells = <0>; compatible = "qcom,hdmi-phy-8996"; reg = <0x009a0600 0x1c4>, @@ -1213,17 +1232,17 @@ compatible = "operating-points-v2"; /* - * 624Mhz and 560Mhz are only available on speed - * bin (1 << 0). All the rest are available on - * all bins of the hardware + * 624Mhz is only available on speed bins 0 and 3. + * 560Mhz is only available on speed bins 0, 2 and 3. + * All the rest are available on all bins of the hardware. */ opp-624000000 { opp-hz = /bits/ 64 <624000000>; - opp-supported-hw = <0x01>; + opp-supported-hw = <0x09>; }; opp-560000000 { opp-hz = /bits/ 64 <560000000>; - opp-supported-hw = <0x01>; + opp-supported-hw = <0x0d>; }; opp-510000000 { opp-hz = /bits/ 64 <510000000>; @@ -1262,15 +1281,15 @@ interrupt-controller; #interrupt-cells = <2>; - blsp1_spi1_default: blsp1-spi1-default { - spi { + blsp1_spi1_default: blsp1-spi1-default-state { + spi-pins { pins = "gpio0", "gpio1", "gpio3"; function = "blsp_spi1"; drive-strength = <12>; bias-disable; }; - cs { + cs-pins { pins = "gpio2"; function = "gpio"; drive-strength = <16>; @@ -1279,42 +1298,56 @@ }; }; - blsp1_spi1_sleep: blsp1-spi1-sleep { + blsp1_spi1_sleep: blsp1-spi1-sleep-state { pins = "gpio0", "gpio1", "gpio2", "gpio3"; function = "gpio"; drive-strength = <2>; bias-pull-down; }; - blsp2_uart2_2pins_default: blsp2-uart1-2pins { + blsp2_uart2_2pins_default: blsp2-uart2-2pins-state { pins = "gpio4", "gpio5"; function = "blsp_uart8"; drive-strength = <16>; bias-disable; }; - blsp2_uart2_2pins_sleep: blsp2-uart1-2pins-sleep { + blsp2_uart2_2pins_sleep: blsp2-uart2-2pins-sleep-state { pins = "gpio4", "gpio5"; function = "gpio"; drive-strength = <2>; bias-disable; }; - blsp2_i2c2_default: blsp2-i2c2 { + blsp2_i2c2_default: blsp2-i2c2-state { pins = "gpio6", "gpio7"; function = "blsp_i2c8"; drive-strength = <16>; bias-disable; }; - blsp2_i2c2_sleep: blsp2-i2c2-sleep { + blsp2_i2c2_sleep: blsp2-i2c2-sleep-state { pins = "gpio6", "gpio7"; function = "gpio"; drive-strength = <2>; bias-disable; }; - cci0_default: cci0-default { + blsp1_i2c6_default: blsp1-i2c6-state { + pins = "gpio27", "gpio28"; + function = "blsp_i2c6"; + drive-strength = <16>; + bias-disable; + }; + + blsp1_i2c6_sleep: blsp1-i2c6-sleep-state { + pins = "gpio27", "gpio28"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + cci0_default: cci0-default-state { pins = "gpio17", "gpio18"; function = "cci_i2c"; drive-strength = <16>; @@ -1322,22 +1355,22 @@ }; camera0_state_on: - camera_rear_default: camera-rear-default { - camera0_mclk: mclk0 { + camera_rear_default: camera-rear-default-state { + camera0_mclk: mclk0-pins { pins = "gpio13"; function = "cam_mclk"; drive-strength = <16>; bias-disable; }; - camera0_rst: rst { + camera0_rst: rst-pins { pins = "gpio25"; function = "gpio"; drive-strength = <16>; bias-disable; }; - camera0_pwdn: pwdn { + camera0_pwdn: pwdn-pins { pins = "gpio26"; function = "gpio"; drive-strength = <16>; @@ -1345,7 +1378,7 @@ }; }; - cci1_default: cci1-default { + cci1_default: cci1-default-state { pins = "gpio19", "gpio20"; function = "cci_i2c"; drive-strength = <16>; @@ -1353,22 +1386,22 @@ }; camera1_state_on: - camera_board_default: camera-board-default { - mclk1 { + camera_board_default: camera-board-default-state { + mclk1-pins { pins = "gpio14"; function = "cam_mclk"; drive-strength = <16>; bias-disable; }; - pwdn { + pwdn-pins { pins = "gpio98"; function = "gpio"; drive-strength = <16>; bias-disable; }; - rst { + rst-pins { pins = "gpio104"; function = "gpio"; drive-strength = <16>; @@ -1377,22 +1410,22 @@ }; camera2_state_on: - camera_front_default: camera-front-default { - camera2_mclk: mclk2 { + camera_front_default: camera-front-default-state { + camera2_mclk: mclk2-pins { pins = "gpio15"; function = "cam_mclk"; drive-strength = <16>; bias-disable; }; - camera2_rst: rst { + camera2_rst: rst-pins { pins = "gpio23"; function = "gpio"; drive-strength = <16>; bias-disable; }; - pwdn { + pwdn-pins { pins = "gpio133"; function = "gpio"; drive-strength = <16>; @@ -1400,22 +1433,22 @@ }; }; - pcie0_state_on: pcie0-state-on { - perst { + pcie0_state_on: pcie0-state-on-state { + perst-pins { pins = "gpio35"; function = "gpio"; drive-strength = <2>; bias-pull-down; }; - clkreq { + clkreq-pins { pins = "gpio36"; function = "pci_e0"; drive-strength = <2>; bias-pull-up; }; - wake { + wake-pins { pins = "gpio37"; function = "gpio"; drive-strength = <2>; @@ -1423,22 +1456,22 @@ }; }; - pcie0_state_off: pcie0-state-off { - perst { + pcie0_state_off: pcie0-state-off-state { + perst-pins { pins = "gpio35"; function = "gpio"; drive-strength = <2>; bias-pull-down; }; - clkreq { + clkreq-pins { pins = "gpio36"; function = "gpio"; drive-strength = <2>; bias-disable; }; - wake { + wake-pins { pins = "gpio37"; function = "gpio"; drive-strength = <2>; @@ -1446,63 +1479,63 @@ }; }; - blsp1_uart2_default: blsp1-uart2-default { + blsp1_uart2_default: blsp1-uart2-default-state { pins = "gpio41", "gpio42", "gpio43", "gpio44"; function = "blsp_uart2"; drive-strength = <16>; bias-disable; }; - blsp1_uart2_sleep: blsp1-uart2-sleep { + blsp1_uart2_sleep: blsp1-uart2-sleep-state { pins = "gpio41", "gpio42", "gpio43", "gpio44"; function = "gpio"; drive-strength = <2>; bias-disable; }; - blsp1_i2c3_default: blsp1-i2c2-default { + blsp1_i2c3_default: blsp1-i2c3-default-state { pins = "gpio47", "gpio48"; function = "blsp_i2c3"; drive-strength = <16>; bias-disable; }; - blsp1_i2c3_sleep: blsp1-i2c2-sleep { + blsp1_i2c3_sleep: blsp1-i2c3-sleep-state { pins = "gpio47", "gpio48"; function = "gpio"; drive-strength = <2>; bias-disable; }; - blsp2_uart3_4pins_default: blsp2-uart2-4pins { + blsp2_uart3_4pins_default: blsp2-uart3-4pins-state { pins = "gpio49", "gpio50", "gpio51", "gpio52"; function = "blsp_uart9"; drive-strength = <16>; bias-disable; }; - blsp2_uart3_4pins_sleep: blsp2-uart2-4pins-sleep { + blsp2_uart3_4pins_sleep: blsp2-uart3-4pins-sleep-state { pins = "gpio49", "gpio50", "gpio51", "gpio52"; function = "blsp_uart9"; drive-strength = <2>; bias-disable; }; - blsp2_i2c3_default: blsp2-i2c3 { + blsp2_i2c3_default: blsp2-i2c3-state-state { pins = "gpio51", "gpio52"; function = "blsp_i2c9"; drive-strength = <16>; bias-disable; }; - blsp2_i2c3_sleep: blsp2-i2c3-sleep { + blsp2_i2c3_sleep: blsp2-i2c3-sleep-state { pins = "gpio51", "gpio52"; function = "gpio"; drive-strength = <2>; bias-disable; }; - wcd_intr_default: wcd-intr-default{ + wcd_intr_default: wcd-intr-default-state { pins = "gpio54"; function = "gpio"; drive-strength = <2>; @@ -1510,21 +1543,21 @@ input-enable; }; - blsp2_i2c1_default: blsp2-i2c1 { + blsp2_i2c1_default: blsp2-i2c1-state { pins = "gpio55", "gpio56"; function = "blsp_i2c7"; drive-strength = <16>; bias-disable; }; - blsp2_i2c1_sleep: blsp2-i2c0-sleep { + blsp2_i2c1_sleep: blsp2-i2c1-sleep-state { pins = "gpio55", "gpio56"; function = "gpio"; drive-strength = <2>; bias-disable; }; - blsp2_i2c5_default: blsp2-i2c5 { + blsp2_i2c5_default: blsp2-i2c5-state { pins = "gpio60", "gpio61"; function = "blsp_i2c11"; drive-strength = <2>; @@ -1533,7 +1566,7 @@ /* Sleep state for BLSP2_I2C5 is missing.. */ - cdc_reset_active: cdc-reset-active { + cdc_reset_active: cdc-reset-active-state { pins = "gpio64"; function = "gpio"; drive-strength = <16>; @@ -1541,7 +1574,7 @@ output-high; }; - cdc_reset_sleep: cdc-reset-sleep { + cdc_reset_sleep: cdc-reset-sleep-state { pins = "gpio64"; function = "gpio"; drive-strength = <16>; @@ -1549,15 +1582,15 @@ output-low; }; - blsp2_spi6_default: blsp2-spi5-default { - spi { + blsp2_spi6_default: blsp2-spi6-default-state { + spi-pins { pins = "gpio85", "gpio86", "gpio88"; function = "blsp_spi12"; drive-strength = <12>; bias-disable; }; - cs { + cs-pins { pins = "gpio87"; function = "gpio"; drive-strength = <16>; @@ -1566,43 +1599,43 @@ }; }; - blsp2_spi6_sleep: blsp2-spi5-sleep { + blsp2_spi6_sleep: blsp2-spi6-sleep-state { pins = "gpio85", "gpio86", "gpio87", "gpio88"; function = "gpio"; drive-strength = <2>; bias-pull-down; }; - blsp2_i2c6_default: blsp2-i2c6 { + blsp2_i2c6_default: blsp2-i2c6-state { pins = "gpio87", "gpio88"; function = "blsp_i2c12"; drive-strength = <16>; bias-disable; }; - blsp2_i2c6_sleep: blsp2-i2c6-sleep { + blsp2_i2c6_sleep: blsp2-i2c6-sleep-state { pins = "gpio87", "gpio88"; function = "gpio"; drive-strength = <2>; bias-disable; }; - pcie1_state_on: pcie1-state-on { - perst { + pcie1_state_on: pcie1-on-state { + perst-pins { pins = "gpio130"; function = "gpio"; drive-strength = <2>; bias-pull-down; }; - clkreq { + clkreq-pins { pins = "gpio131"; function = "pci_e1"; drive-strength = <2>; bias-pull-up; }; - wake { + wake-pins { pins = "gpio132"; function = "gpio"; drive-strength = <2>; @@ -1610,16 +1643,16 @@ }; }; - pcie1_state_off: pcie1-state-off { + pcie1_state_off: pcie1-off-state { /* Perst is missing? */ - clkreq { + clkreq-pins { pins = "gpio131"; function = "gpio"; drive-strength = <2>; bias-disable; }; - wake { + wake-pins { pins = "gpio132"; function = "gpio"; drive-strength = <2>; @@ -1627,22 +1660,22 @@ }; }; - pcie2_state_on: pcie2-state-on { - perst { + pcie2_state_on: pcie2-on-state { + perst-pins { pins = "gpio114"; function = "gpio"; drive-strength = <2>; bias-pull-down; }; - clkreq { + clkreq-pins { pins = "gpio115"; function = "pci_e2"; drive-strength = <2>; bias-pull-up; }; - wake { + wake-pins { pins = "gpio116"; function = "gpio"; drive-strength = <2>; @@ -1650,16 +1683,16 @@ }; }; - pcie2_state_off: pcie2-state-off { + pcie2_state_off: pcie2-off-state { /* Perst is missing? */ - clkreq { + clkreq-pins { pins = "gpio115"; function = "gpio"; drive-strength = <2>; bias-disable; }; - wake { + wake-pins { pins = "gpio116"; function = "gpio"; drive-strength = <2>; @@ -1667,90 +1700,90 @@ }; }; - sdc1_state_on: sdc1-state-on { - clk { + sdc1_state_on: sdc1-on-state { + clk-pins { pins = "sdc1_clk"; bias-disable; drive-strength = <16>; }; - cmd { + cmd-pins { pins = "sdc1_cmd"; bias-pull-up; drive-strength = <10>; }; - data { + data-pins { pins = "sdc1_data"; bias-pull-up; drive-strength = <10>; }; - rclk { + rclk-pins { pins = "sdc1_rclk"; bias-pull-down; }; }; - sdc1_state_off: sdc1-state-off { - clk { + sdc1_state_off: sdc1-off-state { + clk-pins { pins = "sdc1_clk"; bias-disable; drive-strength = <2>; }; - cmd { + cmd-pins { pins = "sdc1_cmd"; bias-pull-up; drive-strength = <2>; }; - data { + data-pins { pins = "sdc1_data"; bias-pull-up; drive-strength = <2>; }; - rclk { + rclk-pins { pins = "sdc1_rclk"; bias-pull-down; }; }; - sdc2_state_on: sdc2-clk-on { - clk { + sdc2_state_on: sdc2-on-state { + clk-pins { pins = "sdc2_clk"; bias-disable; drive-strength = <16>; }; - cmd { + cmd-pins { pins = "sdc2_cmd"; bias-pull-up; drive-strength = <10>; }; - data { + data-pins { pins = "sdc2_data"; bias-pull-up; drive-strength = <10>; }; }; - sdc2_state_off: sdc2-clk-off { - clk { + sdc2_state_off: sdc2-off-state { + clk-pins { pins = "sdc2_clk"; bias-disable; drive-strength = <2>; }; - cmd { + cmd-pins { pins = "sdc2_cmd"; bias-pull-up; drive-strength = <2>; }; - data { + data-pins { pins = "sdc2_data"; bias-pull-up; drive-strength = <2>; @@ -1995,10 +2028,6 @@ lanes-per-direction = <1>; #reset-cells = <1>; status = "disabled"; - - ufs_variant { - compatible = "qcom,ufs_variant"; - }; }; ufsphy: phy@627000 { @@ -2205,9 +2234,9 @@ <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>; #iommu-cells = <1>; - clocks = <&mmcc GPU_AHB_CLK>, - <&gcc GCC_MMSS_BIMC_GFX_CLK>; - clock-names = "iface", "bus"; + clocks = <&gcc GCC_MMSS_BIMC_GFX_CLK>, + <&mmcc GPU_AHB_CLK>; + clock-names = "bus", "iface"; power-domains = <&mmcc GPU_GDSC>; }; @@ -2272,9 +2301,9 @@ <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>; #iommu-cells = <1>; - clocks = <&mmcc SMMU_MDP_AHB_CLK>, - <&mmcc SMMU_MDP_AXI_CLK>; - clock-names = "iface", "bus"; + clocks = <&mmcc SMMU_MDP_AXI_CLK>, + <&mmcc SMMU_MDP_AHB_CLK>; + clock-names = "bus", "iface"; power-domains = <&mmcc MDSS_GDSC>; }; @@ -2292,9 +2321,9 @@ <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&mmcc MMAGIC_VIDEO_GDSC>; - clocks = <&mmcc SMMU_VIDEO_AHB_CLK>, - <&mmcc SMMU_VIDEO_AXI_CLK>; - clock-names = "iface", "bus"; + clocks = <&mmcc SMMU_VIDEO_AXI_CLK>, + <&mmcc SMMU_VIDEO_AHB_CLK>; + clock-names = "bus", "iface"; #iommu-cells = <1>; status = "okay"; }; @@ -2308,10 +2337,9 @@ <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&mmcc MMAGIC_CAMSS_GDSC>; - clocks = <&mmcc SMMU_VFE_AHB_CLK>, - <&mmcc SMMU_VFE_AXI_CLK>; - clock-names = "iface", - "bus"; + clocks = <&mmcc SMMU_VFE_AXI_CLK>, + <&mmcc SMMU_VFE_AHB_CLK>; + clock-names = "bus", "iface"; #iommu-cells = <1>; }; @@ -2336,9 +2364,9 @@ <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_HLOS1_VOTE_LPASS_CORE_SMMU_CLK>, - <&gcc GCC_HLOS1_VOTE_LPASS_ADSP_SMMU_CLK>; - clock-names = "iface", "bus"; + clocks = <&gcc GCC_HLOS1_VOTE_LPASS_ADSP_SMMU_CLK>, + <&gcc GCC_HLOS1_VOTE_LPASS_CORE_SMMU_CLK>; + clock-names = "bus", "iface"; }; slpi_pil: remoteproc@1c00000 { @@ -3127,6 +3155,23 @@ status = "disabled"; }; + blsp1_i2c6: i2c@757a000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x757a000 0x1000>; + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_i2c6_default>; + pinctrl-1 = <&blsp1_i2c6_sleep>; + dmas = <&blsp1_dma 22>, <&blsp1_dma 23>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + blsp2_dma: dma-controller@7584000 { compatible = "qcom,bam-v1.7.0"; reg = <0x07584000 0x2b000>; @@ -3309,27 +3354,25 @@ qcom,num-ees = <2>; }; - slim_msm: slim@91c0000 { + slim_msm: slim-ngd@91c0000 { compatible = "qcom,slim-ngd-v1.5.0"; reg = <0x091c0000 0x2C000>; - reg-names = "ctrl"; interrupts = <0 163 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&slimbam 3>, <&slimbam 4>, - <&slimbam 5>, <&slimbam 6>; - dma-names = "rx", "tx", "tx2", "rx2"; + dmas = <&slimbam 3>, <&slimbam 4>; + dma-names = "rx", "tx"; #address-cells = <1>; #size-cells = <0>; - ngd@1 { + slim@1 { reg = <1>; - #address-cells = <1>; - #size-cells = <1>; + #address-cells = <2>; + #size-cells = <0>; - tasha_ifd: tas-ifd { + tasha_ifd: tas-ifd@0,0 { compatible = "slim217,1a0"; reg = <0 0>; }; - wcd9335: codec@1{ + wcd9335: codec@1,0 { pinctrl-0 = <&cdc_reset_active &wcd_intr_default>; pinctrl-names = "default"; @@ -3342,7 +3385,7 @@ interrupt-names = "intr1", "intr2"; interrupt-controller; #interrupt-cells = <1>; - reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>; + reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>; slim-ifc-dev = <&tasha_ifd>; @@ -3393,12 +3436,12 @@ #address-cells = <1>; #size-cells = <0>; - q6core { + service@3 { reg = <APR_SVC_ADSP_CORE>; compatible = "qcom,q6core"; }; - q6afe: q6afe { + q6afe: service@4 { compatible = "qcom,q6afe"; reg = <APR_SVC_AFE>; q6afedai: dais { @@ -3406,13 +3449,13 @@ #address-cells = <1>; #size-cells = <0>; #sound-dai-cells = <1>; - hdmi@1 { + dai@1 { reg = <1>; }; }; }; - q6asm: q6asm { + q6asm: service@7 { compatible = "qcom,q6asm"; reg = <APR_SVC_ASM>; q6asmdai: dais { @@ -3424,7 +3467,7 @@ }; }; - q6adm: q6adm { + q6adm: service@8 { compatible = "qcom,q6adm"; reg = <APR_SVC_ADM>; q6routing: routing { diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-natrium.dts b/arch/arm64/boot/dts/qcom/msm8996pro-xiaomi-natrium.dts index ff4673ee9e81..d18d0b0eda95 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-natrium.dts +++ b/arch/arm64/boot/dts/qcom/msm8996pro-xiaomi-natrium.dts @@ -5,6 +5,7 @@ /dts-v1/; +#include "msm8996pro.dtsi" #include "msm8996-xiaomi-common.dtsi" #include "pmi8996.dtsi" #include <dt-bindings/sound/qcom,q6afe.h> @@ -12,7 +13,7 @@ / { model = "Xiaomi Mi 5s Plus"; - compatible = "xiaomi,natrium", "qcom,msm8996"; + compatible = "xiaomi,natrium", "qcom,msm8996pro", "qcom,msm8996"; chassis-type = "handset"; qcom,msm-id = <305 0x10000>; qcom,board-id = <47 0>; @@ -164,7 +165,7 @@ }; &rpm_requests { - pm8994-regulators { + regulators-0 { vreg_l3a_0p875: l3 { regulator-name = "vreg_l3a_0p875"; regulator-min-microvolt = <850000>; @@ -398,14 +399,14 @@ "RFFE1_DATA", /* GPIO_148 */ "RFFE1_CLK"; /* GPIO_149 */ - touchscreen_default: touchscreen-default { + touchscreen_default: touchscreen-default-state { pins = "gpio89", "gpio125"; function = "gpio"; drive-strength = <10>; bias-pull-up; }; - touchscreen_sleep: touchscreen-sleep { + touchscreen_sleep: touchscreen-sleep-state { pins = "gpio89", "gpio125"; function = "gpio"; drive-strength = <2>; diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-scorpio.dts b/arch/arm64/boot/dts/qcom/msm8996pro-xiaomi-scorpio.dts index 79be5fb1295b..5e3b9130e9c2 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-scorpio.dts +++ b/arch/arm64/boot/dts/qcom/msm8996pro-xiaomi-scorpio.dts @@ -5,6 +5,7 @@ /dts-v1/; +#include "msm8996pro.dtsi" #include "msm8996-xiaomi-common.dtsi" #include "pmi8996.dtsi" #include <dt-bindings/sound/qcom,q6afe.h> @@ -13,7 +14,7 @@ / { model = "Xiaomi Mi Note 2"; - compatible = "xiaomi,scorpio", "qcom,msm8996"; + compatible = "xiaomi,scorpio", "qcom,msm8996pro", "qcom,msm8996"; chassis-type = "handset"; qcom,msm-id = <305 0x10000>; qcom,board-id = <34 0>; @@ -216,7 +217,7 @@ }; &rpm_requests { - pm8994-regulators { + regulators-0 { vreg_l3a_0p875: l3 { regulator-name = "vreg_l3a_0p875"; regulator-min-microvolt = <850000>; @@ -468,28 +469,28 @@ "RFFE1_DATA", /* GPIO_148 */ "RFFE1_CLK"; /* GPIO_149 */ - touchkey_default: touchkey_default { + touchkey_default: touchkey-default-state { pins = "gpio77"; function = "gpio"; drive-strength = <16>; bias-pull-up; }; - touchkey_sleep: touchkey_sleep { + touchkey_sleep: touchkey-sleep-state { pins = "gpio77"; function = "gpio"; drive-strength = <2>; bias-disable; }; - touchscreen_default: touchscreen_default { + touchscreen_default: touchscreen-default-state { pins = "gpio75", "gpio125"; function = "gpio"; drive-strength = <10>; bias-pull-up; }; - touchscreen_sleep: touchscreen_sleep { + touchscreen_sleep: touchscreen-sleep-state { pins = "gpio75", "gpio125"; function = "gpio"; drive-strength = <2>; diff --git a/arch/arm64/boot/dts/qcom/msm8996pro.dtsi b/arch/arm64/boot/dts/qcom/msm8996pro.dtsi new file mode 100644 index 000000000000..a679a9c0cf99 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8996pro.dtsi @@ -0,0 +1,291 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022, Linaro Limited + */ + +#include "msm8996.dtsi" + +/ { + /delete-node/ opp-table-cluster0; + /delete-node/ opp-table-cluster1; + + /* + * On MSM8996 Pro the cpufreq driver shifts speed bins into the high + * nibble of supported hw, so speed bin 0 becomes 0x10, speed bin 1 + * becomes 0x20, speed 2 becomes 0x40. + */ + + cluster0_opp: opp-table-cluster0 { + compatible = "operating-points-v2-kryo-cpu"; + nvmem-cells = <&speedbin_efuse>; + opp-shared; + + opp-307200000 { + opp-hz = /bits/ 64 <307200000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-384000000 { + opp-hz = /bits/ 64 <384000000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-460800000 { + opp-hz = /bits/ 64 <460800000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-537600000 { + opp-hz = /bits/ 64 <537600000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-614400000 { + opp-hz = /bits/ 64 <614400000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-691200000 { + opp-hz = /bits/ 64 <691200000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-768000000 { + opp-hz = /bits/ 64 <768000000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-844800000 { + opp-hz = /bits/ 64 <844800000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-902400000 { + opp-hz = /bits/ 64 <902400000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-979200000 { + opp-hz = /bits/ 64 <979200000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-1056000000 { + opp-hz = /bits/ 64 <1056000000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-1132800000 { + opp-hz = /bits/ 64 <1132800000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-1209600000 { + opp-hz = /bits/ 64 <1209600000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-1286400000 { + opp-hz = /bits/ 64 <1286400000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-1363200000 { + opp-hz = /bits/ 64 <1363200000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-1440000000 { + opp-hz = /bits/ 64 <1440000000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-1516800000 { + opp-hz = /bits/ 64 <1516800000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-1593600000 { + opp-hz = /bits/ 64 <1593600000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-1996800000 { + opp-hz = /bits/ 64 <1996800000>; + opp-supported-hw = <0x20>; + clock-latency-ns = <200000>; + }; + opp-2188800000 { + opp-hz = /bits/ 64 <2188800000>; + opp-supported-hw = <0x10>; + clock-latency-ns = <200000>; + }; + }; + + cluster1_opp: opp-table-cluster1 { + compatible = "operating-points-v2-kryo-cpu"; + nvmem-cells = <&speedbin_efuse>; + opp-shared; + + opp-307200000 { + opp-hz = /bits/ 64 <307200000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-384000000 { + opp-hz = /bits/ 64 <384000000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-460800000 { + opp-hz = /bits/ 64 <460800000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-537600000 { + opp-hz = /bits/ 64 <537600000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-614400000 { + opp-hz = /bits/ 64 <614400000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-691200000 { + opp-hz = /bits/ 64 <691200000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-748800000 { + opp-hz = /bits/ 64 <748800000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-825600000 { + opp-hz = /bits/ 64 <825600000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-902400000 { + opp-hz = /bits/ 64 <902400000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-979200000 { + opp-hz = /bits/ 64 <979200000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-1056000000 { + opp-hz = /bits/ 64 <1056000000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-1132800000 { + opp-hz = /bits/ 64 <1132800000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-1209600000 { + opp-hz = /bits/ 64 <1209600000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-1286400000 { + opp-hz = /bits/ 64 <1286400000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-1363200000 { + opp-hz = /bits/ 64 <1363200000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-1440000000 { + opp-hz = /bits/ 64 <1440000000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-1516800000 { + opp-hz = /bits/ 64 <1516800000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-1593600000 { + opp-hz = /bits/ 64 <1593600000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-1670400000 { + opp-hz = /bits/ 64 <1670400000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-1747200000 { + opp-hz = /bits/ 64 <1747200000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-1824000000 { + opp-hz = /bits/ 64 <1824000000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-1900800000 { + opp-hz = /bits/ 64 <1900800000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-1977600000 { + opp-hz = /bits/ 64 <1977600000>; + opp-supported-hw = <0x30>; + clock-latency-ns = <200000>; + }; + opp-2054400000 { + opp-hz = /bits/ 64 <2054400000>; + opp-supported-hw = <0x30>; + clock-latency-ns = <200000>; + }; + opp-2150400000 { + opp-hz = /bits/ 64 <2150400000>; + opp-supported-hw = <0x30>; + clock-latency-ns = <200000>; + }; + opp-2246400000 { + opp-hz = /bits/ 64 <2246400000>; + opp-supported-hw = <0x10>; + clock-latency-ns = <200000>; + }; + opp-2342400000 { + opp-hz = /bits/ 64 <2342400000>; + opp-supported-hw = <0x10>; + clock-latency-ns = <200000>; + }; + }; +}; + +&gpu_opp_table { + /* + * Unlike CPU opp tables, the GPU driver does not shift speed bins. + * + * 652.8 Mhz is available on speed bin 0 only. + * 624 Mhz and 560 Mhz are available on speed bins 0 and 1. + * All the rest are available on all bins of the hardware (like on + * plain 8996). + */ + + opp-652800000 { + opp-hz = /bits/ 64 <652800000>; + opp-supported-hw = <0x01>; + }; + opp-624000000 { + opp-hz = /bits/ 64 <624000000>; + opp-supported-hw = <0x03>; + }; + opp-560000000 { + opp-hz = /bits/ 64 <560000000>; + opp-supported-hw = <0x03>; + }; + /* The rest is inherited from msm8996 */ +}; diff --git a/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi b/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi index 7928b8197474..3b7172aa4037 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi @@ -35,7 +35,7 @@ }; &blsp1_uart3_on { - rx { + rx-pins { /delete-property/ bias-disable; /* * Configure a pull-up on 45 (RX). This is needed to @@ -46,7 +46,7 @@ bias-pull-up; }; - cts { + cts-pins { /delete-property/ bias-disable; /* * Configure a pull-down on 47 (CTS) to match the pull @@ -137,7 +137,7 @@ }; &rpm_requests { - pm8998-regulators { + regulators-0 { compatible = "qcom,rpm-pm8998-regulators"; vdd_s1-supply = <&vph_pwr>; @@ -357,8 +357,9 @@ &tlmm { gpio-reserved-ranges = <0 4>, <81 4>; - touchpad: touchpad-pin { + touchpad: touchpad-pin-state { pins = "gpio123"; + function = "gpio"; bias-pull-up; }; }; diff --git a/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts b/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts index 429ba57e20f7..310f7a2df1e8 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts +++ b/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts @@ -216,7 +216,7 @@ }; &blsp1_uart3_on { - rx { + rx-pins { /delete-property/ bias-disable; /* * Configure a pull-up on 45 (RX). This is needed to @@ -227,7 +227,7 @@ bias-pull-up; }; - cts { + cts-pins { /delete-property/ bias-disable; /* * Configure a pull-down on 47 (CTS) to match the pull @@ -310,15 +310,11 @@ }; &funnel4 { - // FIXME: Figure out why clock late_initcall crashes the board with - // this enabled. - // status = "okay"; + /* FIXME: Figure out why clock late_initcall crashes the board with this enabled. */ }; &funnel5 { - // FIXME: Figure out why clock late_initcall crashes the board with - // this enabled. - // status = "okay"; + /* FIXME: Figure out why clock late_initcall crashes the board with this enabled. */ }; &pcie0 { @@ -390,7 +386,7 @@ }; &rpm_requests { - pm8998-regulators { + regulators-0 { compatible = "qcom,rpm-pm8998-regulators"; vdd_s1-supply = <&vph_pwr>; @@ -588,7 +584,7 @@ }; - pmi8998-regulators { + regulators-1 { compatible = "qcom,rpm-pmi8998-regulators"; vdd_bob-supply = <&vph_pwr>; @@ -615,14 +611,14 @@ &tlmm { gpio-reserved-ranges = <0 4>; - mdp_vsync_n: mdp-vsync-n { + mdp_vsync_n: mdp-vsync-n-state { pins = "gpio10"; function = "mdp_vsync_a"; bias-pull-down; drive-strength = <2>; }; - gpio_kb_pins_extra: gpio-kb-pins-extra { + gpio_kb_pins_extra: gpio-kb-pins-extra-state { pins = "gpio21", "gpio32", "gpio33", "gpio114", "gpio128", "gpio129"; function = "gpio"; @@ -630,21 +626,21 @@ bias-pull-up; }; - ts_vio_default: ts-vio-def { + ts_vio_default: ts-vio-def-state { pins = "gpio81"; function = "gpio"; bias-disable; drive-strength = <2>; }; - ts_rst_n: ts-rst-n { + ts_rst_n: ts-rst-n-state { pins = "gpio89"; function = "gpio"; bias-pull-up; drive-strength = <8>; }; - hall_sensor1_default: hall-sensor1-def { + hall_sensor1_default: hall-sensor1-def-state { pins = "gpio124"; function = "gpio"; bias-disable; @@ -652,7 +648,7 @@ input-enable; }; - ts_int_n: ts-int-n { + ts_int_n: ts-int-n-state { pins = "gpio125"; function = "gpio"; bias-disable; diff --git a/arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts b/arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts index cf81c33a9d7e..a105143bee4a 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts +++ b/arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts @@ -28,8 +28,8 @@ }; &remoteproc_mss { - firmware-name = "qcom/LENOVO/81F1/qcdsp1v28998.mbn", - "qcom/LENOVO/81F1/qcdsp28998.mbn"; + firmware-name = "qcom/msm8998/LENOVO/81F1/qcdsp1v28998.mbn", + "qcom/msm8998/LENOVO/81F1/qcdsp28998.mbn"; }; &sdhc2 { diff --git a/arch/arm64/boot/dts/qcom/msm8998-mtp.dts b/arch/arm64/boot/dts/qcom/msm8998-mtp.dts index a3ca58100aee..453a1c9e9808 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-mtp.dts +++ b/arch/arm64/boot/dts/qcom/msm8998-mtp.dts @@ -46,7 +46,7 @@ }; &blsp1_uart3_on { - rx { + rx-pins { /delete-property/ bias-disable; /* * Configure a pull-up on 45 (RX). This is needed to @@ -57,7 +57,7 @@ bias-pull-up; }; - cts { + cts-pins { /delete-property/ bias-disable; /* * Configure a pull-down on 47 (CTS) to match the pull @@ -124,15 +124,11 @@ }; &funnel4 { - // FIXME: Figure out why clock late_initcall crashes the board with - // this enabled. - // status = "okay"; + /* FIXME: Figure out why clock late_initcall crashes the board with this enabled. */ }; &funnel5 { - // FIXME: Figure out why clock late_initcall crashes the board with - // this enabled. - // status = "okay"; + /* FIXME: Figure out why clock late_initcall crashes the board with this enabled. */ }; &pcie0 { @@ -168,7 +164,7 @@ }; &rpm_requests { - pm8998-regulators { + regulators-0 { compatible = "qcom,rpm-pm8998-regulators"; vdd_s1-supply = <&vph_pwr>; @@ -366,7 +362,7 @@ }; - pmi8998-regulators { + regulators-1 { compatible = "qcom,rpm-pmi8998-regulators"; vdd_bob-supply = <&vph_pwr>; diff --git a/arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dts b/arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dts index ef2a88a64d32..b951f98d1b7b 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dts +++ b/arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dts @@ -33,11 +33,9 @@ &pmi8998_gpio { button_backlight_default: button-backlight-state { - pinconf { - pins = "gpio5"; - function = "normal"; - bias-pull-down; - qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; - }; + pins = "gpio5"; + function = "gpio"; + bias-pull-down; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; }; }; diff --git a/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi index 62bda23791bb..7d4a67d07501 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi @@ -233,7 +233,7 @@ }; &blsp1_uart3_on { - rx { + rx-pins { /delete-property/ bias-disable; /* * Configure a pull-up on 46 (RX). This is needed to @@ -244,7 +244,7 @@ bias-pull-up; }; - cts { + cts-pins { /delete-property/ bias-disable; /* * Configure a pull-down on 47 (CTS) to match the pull @@ -279,6 +279,10 @@ }; }; +&pmi8998_rradc { + status = "okay"; +}; + &qusb2phy { status = "okay"; @@ -288,7 +292,7 @@ }; &rpm_requests { - pm8998-regulators { + regulators-0 { compatible = "qcom,rpm-pm8998-regulators"; vdd_s1-supply = <&vph_pwr>; @@ -477,7 +481,7 @@ vreg_lvs2a_1p8: lvs2 { }; }; - pmi8998-regulators { + regulators-1 { compatible = "qcom,rpm-pmi8998-regulators"; vdd_bob-supply = <&vph_pwr>; @@ -492,7 +496,7 @@ &tlmm { gpio-reserved-ranges = <0 4>, <81 4>; - hall_sensor_default: hall-sensor-default { + hall_sensor_default: hall-sensor-default-state { pins = "gpio124"; function = "gpio"; drive-strength = <2>; @@ -500,28 +504,28 @@ input-enable; }; - ts_int_active: ts-int-active { + ts_int_active: ts-int-active-state { pins = "gpio125"; function = "gpio"; drive-strength = <8>; bias-pull-up; }; - ts_reset_active: ts-reset-active { + ts_reset_active: ts-reset-active-state { pins = "gpio89"; function = "gpio"; drive-strength = <8>; bias-pull-up; }; - nfc_int_active: nfc-int-active { + nfc_int_active: nfc-int-active-state { pins = "gpio92"; function = "gpio"; drive-strength = <6>; bias-pull-up; }; - nfc_enable_active: nfc-enable-active { + nfc_enable_active: nfc-enable-active-state { pins = "gpio12", "gpio116"; function = "gpio"; drive-strength = <6>; diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi index d08639082247..5da87baa2b23 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi @@ -375,7 +375,7 @@ }; &rpm_requests { - pm8998-regulators { + regulators-0 { compatible = "qcom,rpm-pm8998-regulators"; vdd_s1-supply = <&vph_pwr>; @@ -410,135 +410,166 @@ regulator-min-microvolt = <1352000>; regulator-max-microvolt = <1352000>; }; + vreg_s4a_1p8: s4 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-system-load = <100000>; regulator-allow-set-load; }; + vreg_s5a_2p04: s5 { regulator-min-microvolt = <1904000>; regulator-max-microvolt = <2032000>; }; + vreg_s7a_1p025: s7 { regulator-min-microvolt = <900000>; regulator-max-microvolt = <1028000>; }; + vreg_l1a_0p875: l1 { regulator-min-microvolt = <880000>; regulator-max-microvolt = <880000>; regulator-system-load = <73400>; regulator-allow-set-load; }; + vreg_l2a_1p2: l2 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-system-load = <12560>; regulator-allow-set-load; }; + vreg_l3a_1p0: l3 { regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; }; + vreg_l5a_0p8: l5 { regulator-min-microvolt = <800000>; regulator-max-microvolt = <800000>; }; + vreg_l6a_1p8: l6 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; + vreg_l7a_1p8: l7 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; + vreg_l8a_1p2: l8 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; }; + vreg_l9a_1p8: l9 { regulator-min-microvolt = <1808000>; regulator-max-microvolt = <2960000>; }; + vreg_l10a_1p8: l10 { regulator-min-microvolt = <1808000>; regulator-max-microvolt = <2960000>; }; + vreg_l11a_1p0: l11 { regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; }; + vreg_l12a_1p8: l12 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; + vreg_l13a_2p95: l13 { regulator-min-microvolt = <1808000>; regulator-max-microvolt = <2960000>; regulator-allow-set-load; }; + vreg_l14a_1p85: l14 { regulator-min-microvolt = <1848000>; regulator-max-microvolt = <1856000>; regulator-system-load = <32000>; regulator-allow-set-load; }; + vreg_l15a_1p8: l15 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; + vreg_l16a_2p7: l16 { regulator-min-microvolt = <2704000>; regulator-max-microvolt = <2704000>; }; + vreg_l17a_1p3: l17 { regulator-min-microvolt = <1304000>; regulator-max-microvolt = <1304000>; }; - vreg_l18a_2p85: l18 {}; + + vreg_l18a_2p85: l18 { }; + vreg_l19a_2p7: l19 { regulator-min-microvolt = <2696000>; regulator-max-microvolt = <2704000>; }; + vreg_l20a_2p95: l20 { regulator-min-microvolt = <2960000>; regulator-max-microvolt = <2960000>; regulator-system-load = <10000>; regulator-allow-set-load; }; + vreg_l21a_2p95: l21 { regulator-min-microvolt = <2960000>; regulator-max-microvolt = <2960000>; regulator-system-load = <800000>; regulator-allow-set-load; }; + vreg_l22a_2p85: l22 { }; + vreg_l23a_3p3: l23 { regulator-min-microvolt = <3312000>; regulator-max-microvolt = <3312000>; }; + vreg_l24a_3p075: l24 { regulator-min-microvolt = <3088000>; regulator-max-microvolt = <3088000>; }; + vreg_l25a_3p3: l25 { regulator-min-microvolt = <3104000>; regulator-max-microvolt = <3312000>; }; + vreg_l26a_1p2: l26 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-allow-set-load; }; + vreg_l28_3p0: l28 { regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; }; + vreg_lvs1a_1p8: lvs1 { }; + vreg_lvs2a_1p8: lvs2 { }; }; - pmi8998-regulators { + regulators-1 { compatible = "qcom,rpm-pmi8998-regulators"; vdd_bob-supply = <&vph_pwr>; @@ -565,14 +596,14 @@ &tlmm { gpio-reserved-ranges = <0 4>, <81 4>; - mdp_vsync_n: mdp-vsync-n { + mdp_vsync_n: mdp-vsync-n-state { pins = "gpio10"; function = "mdp_vsync_a"; drive-strength = <2>; bias-pull-down; }; - nfc_ven: nfc-ven { + nfc_ven: nfc-ven-state { pins = "gpio12"; function = "gpio"; bias-disable; @@ -580,42 +611,42 @@ output-low; }; - msm_mclk0_default: msm-mclk0-active { + msm_mclk0_default: msm-mclk0-active-state { pins = "gpio13"; function = "cam_mclk"; drive-strength = <2>; bias-disable; }; - msm_mclk1_default: msm-mclk1-active { + msm_mclk1_default: msm-mclk1-active-state { pins = "gpio14"; function = "cam_mclk"; drive-strength = <2>; bias-disable; }; - cci0_default: cci0-default { + cci0_default: cci0-default-state { pins = "gpio18", "gpio19"; function = "cci_i2c"; bias-disable; drive-strength = <2>; }; - cci1_default: cci1-default { + cci1_default: cci1-default-state { pins = "gpio19", "gpio20"; function = "cci_i2c"; bias-disable; drive-strength = <2>; }; - cam0_vdig_default: cam0-vdig-default { + cam0_vdig_default: cam0-vdig-default-state { pins = "gpio21"; function = "gpio"; bias-disable; drive-strength = <2>; }; - tof_int: tof-int { + tof_int: tof-int-state { pins = "gpio22"; function = "gpio"; bias-pull-up; @@ -623,28 +654,28 @@ input-enable; }; - cam1_vdig_default: cam1-vdig-default { + cam1_vdig_default: cam1-vdig-default-state { pins = "gpio25"; function = "gpio"; bias-disable; drive-strength = <2>; }; - usb_extcon_active: usb-extcon-active { + usb_extcon_active: usb-extcon-active-state { pins = "gpio38"; function = "gpio"; bias-disable; drive-strength = <16>; }; - tof_reset: tof-reset { + tof_reset: tof-reset-state { pins = "gpio27"; function = "gpio"; bias-disable; drive-strength = <2>; }; - hall_sensor0_default: acc-cover-open { + hall_sensor0_default: acc-cover-open-state { pins = "gpio124"; function = "gpio"; bias-disable; @@ -652,14 +683,14 @@ input-enable; }; - ts_int_n: ts-int-n { + ts_int_n: ts-int-n-state { pins = "gpio125"; function = "gpio"; drive-strength = <8>; bias-pull-up; }; - usb_vbus_active: usb-vbus-active { + usb_vbus_active: usb-vbus-active-state { pins = "gpio128"; function = "gpio"; bias-disable; @@ -667,7 +698,7 @@ output-low; }; - ts_vddio_en: ts-vddio-en-default { + ts_vddio_en: ts-vddio-en-default-state { pins = "gpio133"; function = "gpio"; bias-disable; diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi index f05f16ac5cc1..539382dab0ad 100644 --- a/arch/arm64/boot/dts/qcom/msm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi @@ -900,7 +900,7 @@ }; pcie0: pci@1c00000 { - compatible = "qcom,pcie-msm8996"; + compatible = "qcom,pcie-msm8998", "qcom,pcie-msm8996"; reg = <0x01c00000 0x2000>, <0x1b000000 0xf1d>, <0x1b000f20 0xa8>, @@ -929,11 +929,11 @@ <0 0 0 4 &intc 0 0 139 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_PCIE_0_PIPE_CLK>, - <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, - <&gcc GCC_PCIE_0_SLV_AXI_CLK>, + <&gcc GCC_PCIE_0_AUX_CLK>, <&gcc GCC_PCIE_0_CFG_AHB_CLK>, - <&gcc GCC_PCIE_0_AUX_CLK>; - clock-names = "pipe", "bus_master", "bus_slave", "cfg", "aux"; + <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_AXI_CLK>; + clock-names = "pipe", "aux", "cfg", "bus_master", "bus_slave"; power-domains = <&gcc PCIE_0_GDSC>; iommu-map = <0x100 &anoc1_smmu 0x1480 1>; @@ -1056,81 +1056,82 @@ compatible = "qcom,msm8998-pinctrl"; reg = <0x03400000 0xc00000>; interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-ranges = <&tlmm 0 0 150>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; - sdc2_on: sdc2-on { - clk { + sdc2_on: sdc2-on-state { + clk-pins { pins = "sdc2_clk"; drive-strength = <16>; bias-disable; }; - cmd { + cmd-pins { pins = "sdc2_cmd"; drive-strength = <10>; bias-pull-up; }; - data { + data-pins { pins = "sdc2_data"; drive-strength = <10>; bias-pull-up; }; }; - sdc2_off: sdc2-off { - clk { + sdc2_off: sdc2-off-state { + clk-pins { pins = "sdc2_clk"; drive-strength = <2>; bias-disable; }; - cmd { + cmd-pins { pins = "sdc2_cmd"; drive-strength = <2>; bias-pull-up; }; - data { + data-pins { pins = "sdc2_data"; drive-strength = <2>; bias-pull-up; }; }; - sdc2_cd: sdc2-cd { + sdc2_cd: sdc2-cd-state { pins = "gpio95"; function = "gpio"; bias-pull-up; drive-strength = <2>; }; - blsp1_uart3_on: blsp1-uart3-on { - tx { + blsp1_uart3_on: blsp1-uart3-on-state { + tx-pins { pins = "gpio45"; function = "blsp_uart3_a"; drive-strength = <2>; bias-disable; }; - rx { + rx-pins { pins = "gpio46"; function = "blsp_uart3_a"; drive-strength = <2>; bias-disable; }; - cts { + cts-pins { pins = "gpio47"; function = "blsp_uart3_a"; drive-strength = <2>; bias-disable; }; - rfr { + rfr-pins { pins = "gpio48"; function = "blsp_uart3_a"; drive-strength = <2>; @@ -1138,168 +1139,168 @@ }; }; - blsp1_i2c1_default: blsp1-i2c1-default { + blsp1_i2c1_default: blsp1-i2c1-default-state { pins = "gpio2", "gpio3"; function = "blsp_i2c1"; drive-strength = <2>; bias-disable; }; - blsp1_i2c1_sleep: blsp1-i2c1-sleep { + blsp1_i2c1_sleep: blsp1-i2c1-sleep-state-state { pins = "gpio2", "gpio3"; function = "blsp_i2c1"; drive-strength = <2>; bias-pull-up; }; - blsp1_i2c2_default: blsp1-i2c2-default { + blsp1_i2c2_default: blsp1-i2c2-default-state { pins = "gpio32", "gpio33"; function = "blsp_i2c2"; drive-strength = <2>; bias-disable; }; - blsp1_i2c2_sleep: blsp1-i2c2-sleep { + blsp1_i2c2_sleep: blsp1-i2c2-sleep-state-state { pins = "gpio32", "gpio33"; function = "blsp_i2c2"; drive-strength = <2>; bias-pull-up; }; - blsp1_i2c3_default: blsp1-i2c3-default { + blsp1_i2c3_default: blsp1-i2c3-default-state { pins = "gpio47", "gpio48"; function = "blsp_i2c3"; drive-strength = <2>; bias-disable; }; - blsp1_i2c3_sleep: blsp1-i2c3-sleep { + blsp1_i2c3_sleep: blsp1-i2c3-sleep-state { pins = "gpio47", "gpio48"; function = "blsp_i2c3"; drive-strength = <2>; bias-pull-up; }; - blsp1_i2c4_default: blsp1-i2c4-default { + blsp1_i2c4_default: blsp1-i2c4-default-state { pins = "gpio10", "gpio11"; function = "blsp_i2c4"; drive-strength = <2>; bias-disable; }; - blsp1_i2c4_sleep: blsp1-i2c4-sleep { + blsp1_i2c4_sleep: blsp1-i2c4-sleep-state { pins = "gpio10", "gpio11"; function = "blsp_i2c4"; drive-strength = <2>; bias-pull-up; }; - blsp1_i2c5_default: blsp1-i2c5-default { + blsp1_i2c5_default: blsp1-i2c5-default-state { pins = "gpio87", "gpio88"; function = "blsp_i2c5"; drive-strength = <2>; bias-disable; }; - blsp1_i2c5_sleep: blsp1-i2c5-sleep { + blsp1_i2c5_sleep: blsp1-i2c5-sleep-state { pins = "gpio87", "gpio88"; function = "blsp_i2c5"; drive-strength = <2>; bias-pull-up; }; - blsp1_i2c6_default: blsp1-i2c6-default { + blsp1_i2c6_default: blsp1-i2c6-default-state { pins = "gpio43", "gpio44"; function = "blsp_i2c6"; drive-strength = <2>; bias-disable; }; - blsp1_i2c6_sleep: blsp1-i2c6-sleep { + blsp1_i2c6_sleep: blsp1-i2c6-sleep-state { pins = "gpio43", "gpio44"; function = "blsp_i2c6"; drive-strength = <2>; bias-pull-up; }; /* 6 interfaces per QUP, BLSP2 indexes are numbered (n)+6 */ - blsp2_i2c1_default: blsp2-i2c1-default { + blsp2_i2c1_default: blsp2-i2c1-default-state { pins = "gpio55", "gpio56"; function = "blsp_i2c7"; drive-strength = <2>; bias-disable; }; - blsp2_i2c1_sleep: blsp2-i2c1-sleep { + blsp2_i2c1_sleep: blsp2-i2c1-sleep-state { pins = "gpio55", "gpio56"; function = "blsp_i2c7"; drive-strength = <2>; bias-pull-up; }; - blsp2_i2c2_default: blsp2-i2c2-default { + blsp2_i2c2_default: blsp2-i2c2-default-state { pins = "gpio6", "gpio7"; function = "blsp_i2c8"; drive-strength = <2>; bias-disable; }; - blsp2_i2c2_sleep: blsp2-i2c2-sleep { + blsp2_i2c2_sleep: blsp2-i2c2-sleep-state { pins = "gpio6", "gpio7"; function = "blsp_i2c8"; drive-strength = <2>; bias-pull-up; }; - blsp2_i2c3_default: blsp2-i2c3-default { + blsp2_i2c3_default: blsp2-i2c3-default-state { pins = "gpio51", "gpio52"; function = "blsp_i2c9"; drive-strength = <2>; bias-disable; }; - blsp2_i2c3_sleep: blsp2-i2c3-sleep { + blsp2_i2c3_sleep: blsp2-i2c3-sleep-state { pins = "gpio51", "gpio52"; function = "blsp_i2c9"; drive-strength = <2>; bias-pull-up; }; - blsp2_i2c4_default: blsp2-i2c4-default { + blsp2_i2c4_default: blsp2-i2c4-default-state { pins = "gpio67", "gpio68"; function = "blsp_i2c10"; drive-strength = <2>; bias-disable; }; - blsp2_i2c4_sleep: blsp2-i2c4-sleep { + blsp2_i2c4_sleep: blsp2-i2c4-sleep-state { pins = "gpio67", "gpio68"; function = "blsp_i2c10"; drive-strength = <2>; bias-pull-up; }; - blsp2_i2c5_default: blsp2-i2c5-default { + blsp2_i2c5_default: blsp2-i2c5-default-state { pins = "gpio60", "gpio61"; function = "blsp_i2c11"; drive-strength = <2>; bias-disable; }; - blsp2_i2c5_sleep: blsp2-i2c5-sleep { + blsp2_i2c5_sleep: blsp2-i2c5-sleep-state { pins = "gpio60", "gpio61"; function = "blsp_i2c11"; drive-strength = <2>; bias-pull-up; }; - blsp2_i2c6_default: blsp2-i2c6-default { + blsp2_i2c6_default: blsp2-i2c6-default-state { pins = "gpio83", "gpio84"; function = "blsp_i2c12"; drive-strength = <2>; bias-disable; }; - blsp2_i2c6_sleep: blsp2-i2c6-sleep { + blsp2_i2c6_sleep: blsp2-i2c6-sleep-state { pins = "gpio83", "gpio84"; function = "blsp_i2c12"; drive-strength = <2>; @@ -1903,7 +1904,7 @@ cpu = <&CPU4>; - port{ + port { etm4_out: endpoint { remote-endpoint = <&apss_funnel_in4>; }; @@ -1920,7 +1921,7 @@ cpu = <&CPU5>; - port{ + port { etm5_out: endpoint { remote-endpoint = <&apss_funnel_in5>; }; @@ -1937,7 +1938,7 @@ cpu = <&CPU6>; - port{ + port { etm6_out: endpoint { remote-endpoint = <&apss_funnel_in6>; }; @@ -1954,7 +1955,7 @@ cpu = <&CPU7>; - port{ + port { etm7_out: endpoint { remote-endpoint = <&apss_funnel_in7>; }; diff --git a/arch/arm64/boot/dts/qcom/pm6125.dtsi b/arch/arm64/boot/dts/qcom/pm6125.dtsi new file mode 100644 index 000000000000..1c8ccda26ffb --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pm6125.dtsi @@ -0,0 +1,154 @@ +// SPDX-License-Identifier: BSD-3-Clause + +#include <dt-bindings/iio/qcom,spmi-vadc.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> + +/ { + thermal-zones { + pm6125-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + + thermal-sensors = <&pm6125_temp>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "hot"; + }; + + trip2 { + temperature = <145000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; +}; + +&spmi_bus { + pmic@0 { + compatible = "qcom,pm6125", "qcom,spmi-pmic"; + reg = <0x0 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm6125_pon: pon@800 { + compatible = "qcom,pm8998-pon"; + reg = <0x800>; + mode-bootloader = <0x2>; + mode-recovery = <0x1>; + + pon_pwrkey: pwrkey { + compatible = "qcom,pm8941-pwrkey"; + interrupts = <0x0 0x8 0x0 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + linux,code = <KEY_POWER>; + bias-pull-up; + status = "disabled"; + }; + + pon_resin: resin { + compatible = "qcom,pm8941-resin"; + interrupts = <0x0 0x8 0x1 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + status = "disabled"; + }; + }; + + pm6125_temp: temp-alarm@2400 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0x2400>; + interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>; + io-channels = <&pm6125_adc ADC5_DIE_TEMP>; + io-channel-names = "thermal"; + #thermal-sensor-cells = <0>; + }; + + pm6125_adc: adc@3100 { + compatible = "qcom,spmi-adc5"; + reg = <0x3100>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + #io-channel-cells = <1>; + + ref-gnd@0 { + reg = <ADC5_REF_GND>; + qcom,pre-scaling = <1 1>; + }; + + vref-1p25@1 { + reg = <ADC5_1P25VREF>; + qcom,pre-scaling = <1 1>; + }; + + die-temp@6 { + reg = <ADC5_DIE_TEMP>; + qcom,pre-scaling = <1 1>; + }; + + vph-pwr@83 { + reg = <ADC5_VPH_PWR>; + qcom,pre-scaling = <1 3>; + }; + + vcoin@85 { + reg = <ADC5_VCOIN>; + qcom,pre-scaling = <1 3>; + }; + + xo-therm@4c { + reg = <ADC5_XO_THERM_100K_PU>; + qcom,pre-scaling = <1 1>; + qcom,hw-settle-time = <200>; + qcom,ratiometric; + }; + }; + + pm6125_adc_tm: adc-tm@3500 { + compatible = "qcom,spmi-adc-tm5"; + reg = <0x3500>; + interrupts = <0x0 0x35 0x0 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + #thermal-sensor-cells = <1>; + status = "disabled"; + }; + + pm6125_rtc: rtc@6000 { + compatible = "qcom,pm8941-rtc"; + reg = <0x6000>, <0x6100>; + reg-names = "rtc", "alarm"; + interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + }; + + pm6125_gpio: gpio@c000 { + compatible = "qcom,pm6125-gpio", "qcom,spmi-gpio"; + reg = <0xc000>; + gpio-controller; + gpio-ranges = <&pm6125_gpio 0 0 9>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pmic@1 { + compatible = "qcom,pm6125", "qcom,spmi-pmic"; + reg = <0x1 SPMI_USID>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/pm6150.dtsi b/arch/arm64/boot/dts/qcom/pm6150.dtsi index 8a4972e6a24c..3d91fb405ca2 100644 --- a/arch/arm64/boot/dts/qcom/pm6150.dtsi +++ b/arch/arm64/boot/dts/qcom/pm6150.dtsi @@ -1,5 +1,7 @@ // SPDX-License-Identifier: BSD-3-Clause -// Copyright (c) 2019, The Linux Foundation. All rights reserved. +/* + * Copyright (c) 2019, The Linux Foundation. All rights reserved. + */ #include <dt-bindings/iio/qcom,spmi-vadc.h> #include <dt-bindings/input/linux-event-codes.h> @@ -86,7 +88,7 @@ status = "disabled"; }; - pm6150_gpio: gpios@c000 { + pm6150_gpio: gpio@c000 { compatible = "qcom,pm6150-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; diff --git a/arch/arm64/boot/dts/qcom/pm6150l.dtsi b/arch/arm64/boot/dts/qcom/pm6150l.dtsi index f02c223ef448..90aac61ad264 100644 --- a/arch/arm64/boot/dts/qcom/pm6150l.dtsi +++ b/arch/arm64/boot/dts/qcom/pm6150l.dtsi @@ -1,10 +1,43 @@ // SPDX-License-Identifier: BSD-3-Clause -// Copyright (c) 2019, The Linux Foundation. All rights reserved. +/* + * Copyright (c) 2019, The Linux Foundation. All rights reserved. + */ #include <dt-bindings/iio/qcom,spmi-vadc.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/spmi/spmi.h> +/ { + thermal-zones { + pm6150l-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&pm6150l_temp>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "hot"; + }; + + trip2 { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; +}; + &spmi_bus { pm6150l_lsid4: pmic@4 { compatible = "qcom,pm6150l", "qcom,spmi-pmic"; @@ -12,6 +45,13 @@ #address-cells = <1>; #size-cells = <0>; + pm6150l_temp: temp-alarm@2400 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0x2400>; + interrupts = <0x4 0x24 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + pm6150l_adc: adc@3100 { compatible = "qcom,spmi-adc5"; reg = <0x3100>; @@ -55,7 +95,7 @@ status = "disabled"; }; - pm6150l_gpio: gpios@c000 { + pm6150l_gpio: gpio@c000 { compatible = "qcom,pm6150l-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; diff --git a/arch/arm64/boot/dts/qcom/pm6350.dtsi b/arch/arm64/boot/dts/qcom/pm6350.dtsi index ecf9b9919182..3a2a841e83f1 100644 --- a/arch/arm64/boot/dts/qcom/pm6350.dtsi +++ b/arch/arm64/boot/dts/qcom/pm6350.dtsi @@ -3,8 +3,40 @@ * Copyright (c) 2021, Luca Weiss <luca@z3ntu.xyz> */ +#include <dt-bindings/input/input.h> #include <dt-bindings/spmi/spmi.h> +/ { + thermal-zones { + pm6350-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + + thermal-sensors = <&pm6350_temp>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "hot"; + }; + + trip2 { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; +}; + &spmi_bus { pmic@0 { compatible = "qcom,pm6350", "qcom,spmi-pmic"; @@ -35,7 +67,14 @@ }; }; - pm6350_gpios: gpios@c000 { + pm6350_temp: temp-alarm@2400 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0x2400>; + interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + + pm6350_gpios: gpio@c000 { compatible = "qcom,pm6350-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; diff --git a/arch/arm64/boot/dts/qcom/pm660.dtsi b/arch/arm64/boot/dts/qcom/pm660.dtsi index e1622b16c08b..fc0eccaccdf6 100644 --- a/arch/arm64/boot/dts/qcom/pm660.dtsi +++ b/arch/arm64/boot/dts/qcom/pm660.dtsi @@ -163,14 +163,14 @@ qcom,pre-scaling = <1 3>; }; - vcoin: vcoin@83 { + vcoin: vcoin@85 { reg = <ADC5_VCOIN>; qcom,decimation = <1024>; qcom,pre-scaling = <1 3>; }; }; - pm660_gpios: gpios@c000 { + pm660_gpios: gpio@c000 { compatible = "qcom,pm660-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; diff --git a/arch/arm64/boot/dts/qcom/pm660l.dtsi b/arch/arm64/boot/dts/qcom/pm660l.dtsi index 8aa0a5078772..f9b3864bd3b9 100644 --- a/arch/arm64/boot/dts/qcom/pm660l.dtsi +++ b/arch/arm64/boot/dts/qcom/pm660l.dtsi @@ -48,7 +48,7 @@ #thermal-sensor-cells = <0>; }; - pm660l_gpios: gpios@c000 { + pm660l_gpios: gpio@c000 { compatible = "qcom,pm660l-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; diff --git a/arch/arm64/boot/dts/qcom/pm7325.dtsi b/arch/arm64/boot/dts/qcom/pm7325.dtsi index e7f64a9ddc9c..d1c5476af5ee 100644 --- a/arch/arm64/boot/dts/qcom/pm7325.dtsi +++ b/arch/arm64/boot/dts/qcom/pm7325.dtsi @@ -1,5 +1,7 @@ // SPDX-License-Identifier: BSD-3-Clause -// Copyright (c) 2021, The Linux Foundation. All rights reserved. +/* + * Copyright (c) 2021, The Linux Foundation. All rights reserved. + */ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/spmi/spmi.h> @@ -18,7 +20,7 @@ #thermal-sensor-cells = <0>; }; - pm7325_gpios: gpios@8800 { + pm7325_gpios: gpio@8800 { compatible = "qcom,pm7325-gpio", "qcom,spmi-gpio"; reg = <0x8800>; gpio-controller; diff --git a/arch/arm64/boot/dts/qcom/pm8005.dtsi b/arch/arm64/boot/dts/qcom/pm8005.dtsi index 50fb6c753bf8..8d4b081b4e9d 100644 --- a/arch/arm64/boot/dts/qcom/pm8005.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8005.dtsi @@ -11,7 +11,7 @@ #address-cells = <1>; #size-cells = <0>; - pm8005_gpio: gpios@c000 { + pm8005_gpio: gpio@c000 { compatible = "qcom,pm8005-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; diff --git a/arch/arm64/boot/dts/qcom/pm8150b.dtsi b/arch/arm64/boot/dts/qcom/pm8150b.dtsi index cdded791d96e..66752cc063d6 100644 --- a/arch/arm64/boot/dts/qcom/pm8150b.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8150b.dtsi @@ -53,7 +53,7 @@ status = "disabled"; }; - pm8150b_vbus: dcdc@1100 { + pm8150b_vbus: usb-vbus-regulator@1100 { compatible = "qcom,pm8150b-vbus-reg"; status = "disabled"; reg = <0x1100>; diff --git a/arch/arm64/boot/dts/qcom/pm8916.dtsi b/arch/arm64/boot/dts/qcom/pm8916.dtsi index 606c2a6d1f0f..08f9ca006e72 100644 --- a/arch/arm64/boot/dts/qcom/pm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8916.dtsi @@ -107,7 +107,7 @@ #interrupt-cells = <2>; }; - pm8916_gpios: gpios@c000 { + pm8916_gpios: gpio@c000 { compatible = "qcom,pm8916-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; diff --git a/arch/arm64/boot/dts/qcom/pm8994.dtsi b/arch/arm64/boot/dts/qcom/pm8994.dtsi index e92e5ac414d3..672094c8ca58 100644 --- a/arch/arm64/boot/dts/qcom/pm8994.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8994.dtsi @@ -108,7 +108,7 @@ }; }; - pm8994_gpios: gpios@c000 { + pm8994_gpios: gpio@c000 { compatible = "qcom,pm8994-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; diff --git a/arch/arm64/boot/dts/qcom/pm8998.dtsi b/arch/arm64/boot/dts/qcom/pm8998.dtsi index d09f2954b6f9..6a0e14382be8 100644 --- a/arch/arm64/boot/dts/qcom/pm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8998.dtsi @@ -63,7 +63,7 @@ #thermal-sensor-cells = <0>; }; - pm8998_coincell: coincell@2800 { + pm8998_coincell: charger@2800 { compatible = "qcom,pm8941-coincell"; reg = <0x2800>; @@ -101,7 +101,7 @@ interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; }; - pm8998_gpio: gpios@c000 { + pm8998_gpio: gpio@c000 { compatible = "qcom,pm8998-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; diff --git a/arch/arm64/boot/dts/qcom/pmi8994.dtsi b/arch/arm64/boot/dts/qcom/pmi8994.dtsi index 542c215dde10..a0af91698d49 100644 --- a/arch/arm64/boot/dts/qcom/pmi8994.dtsi +++ b/arch/arm64/boot/dts/qcom/pmi8994.dtsi @@ -10,7 +10,7 @@ #address-cells = <1>; #size-cells = <0>; - pmi8994_gpios: gpios@c000 { + pmi8994_gpios: gpio@c000 { compatible = "qcom,pmi8994-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; diff --git a/arch/arm64/boot/dts/qcom/pmi8998.dtsi b/arch/arm64/boot/dts/qcom/pmi8998.dtsi index 3852a012bb0f..cd1caeae8281 100644 --- a/arch/arm64/boot/dts/qcom/pmi8998.dtsi +++ b/arch/arm64/boot/dts/qcom/pmi8998.dtsi @@ -9,7 +9,7 @@ #address-cells = <1>; #size-cells = <0>; - pmi8998_gpio: gpios@c000 { + pmi8998_gpio: gpio@c000 { compatible = "qcom,pmi8998-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; @@ -18,6 +18,14 @@ interrupt-controller; #interrupt-cells = <2>; }; + + pmi8998_rradc: adc@4500 { + compatible = "qcom,pmi8998-rradc"; + reg = <0x4500>; + #io-channel-cells = <1>; + + status = "disabled"; + }; }; pmi8998_lsid1: pmic@3 { diff --git a/arch/arm64/boot/dts/qcom/pmp8074.dtsi b/arch/arm64/boot/dts/qcom/pmp8074.dtsi new file mode 100644 index 000000000000..ceb2e6358b3d --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pmp8074.dtsi @@ -0,0 +1,125 @@ +// SPDX-License-Identifier: GPL-2.0-only OR BSD-3-Clause + +#include <dt-bindings/spmi/spmi.h> +#include <dt-bindings/iio/qcom,spmi-vadc.h> + +&spmi_bus { + pmic@0 { + compatible = "qcom,pmp8074", "qcom,spmi-pmic"; + reg = <0x0 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmp8074_adc: adc@3100 { + compatible = "qcom,spmi-adc-rev2"; + reg = <0x3100>; + interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + + ref-gnd@0 { + reg = <ADC5_REF_GND>; + qcom,pre-scaling = <1 1>; + }; + + vref-1p25@1 { + reg = <ADC5_1P25VREF>; + qcom,pre-scaling = <1 1>; + }; + + vref-vadc@2 { + reg = <ADC5_VREF_VADC>; + qcom,pre-scaling = <1 1>; + }; + + pmic_die: die-temp@6 { + reg = <ADC5_DIE_TEMP>; + qcom,pre-scaling = <1 1>; + }; + + xo_therm: xo-temp@76 { + reg = <ADC5_XO_THERM_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + }; + + pa_therm1: thermistor1@77 { + reg = <ADC5_AMUX_THM1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + }; + + pa_therm2: thermistor2@78 { + reg = <ADC5_AMUX_THM2_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + }; + + pa_therm3: thermistor3@79 { + reg = <ADC5_AMUX_THM3_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + }; + + vph-pwr@131 { + reg = <ADC5_VPH_PWR>; + qcom,pre-scaling = <1 3>; + }; + }; + + pmp8074_rtc: rtc@6000 { + compatible = "qcom,pm8941-rtc"; + reg = <0x6000>; + reg-names = "rtc", "alarm"; + interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>; + allow-set-time; + status = "disabled"; + }; + + pmp8074_gpios: gpio@c000 { + compatible = "qcom,pmp8074-gpio", "qcom,spmi-gpio"; + reg = <0xc000>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmp8074_gpios 0 0 12>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pmic@1 { + compatible = "qcom,pmp8074", "qcom,spmi-pmic"; + reg = <0x1 SPMI_USID>; + + regulators { + compatible = "qcom,pmp8074-regulators"; + + s3: s3 { + regulator-name = "vdd_s3"; + regulator-min-microvolt = <592000>; + regulator-max-microvolt = <1064000>; + regulator-always-on; + regulator-boot-on; + }; + + s4: s4 { + regulator-name = "vdd_s4"; + regulator-min-microvolt = <712000>; + regulator-max-microvolt = <992000>; + regulator-always-on; + regulator-boot-on; + }; + + l11: l11 { + regulator-name = "l11"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/pms405.dtsi b/arch/arm64/boot/dts/qcom/pms405.dtsi index 634b0681d04c..ffe9e33808d0 100644 --- a/arch/arm64/boot/dts/qcom/pms405.dtsi +++ b/arch/arm64/boot/dts/qcom/pms405.dtsi @@ -1,5 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 -// Copyright (c) 2018, Linaro Limited +/* + * Copyright (c) 2018, Linaro Limited + */ #include <dt-bindings/spmi/spmi.h> #include <dt-bindings/input/linux-event-codes.h> diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb-1000.dts b/arch/arm64/boot/dts/qcom/qcs404-evb-1000.dts index 937eb4555ffe..fc29b194cd34 100644 --- a/arch/arm64/boot/dts/qcom/qcs404-evb-1000.dts +++ b/arch/arm64/boot/dts/qcom/qcs404-evb-1000.dts @@ -1,5 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 -// Copyright (c) 2018, Linaro Limited +/* + * Copyright (c) 2018, Linaro Limited + */ /dts-v1/; diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts b/arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts index 08d5d51221cf..59702ba24f35 100644 --- a/arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts +++ b/arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts @@ -1,5 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 -// Copyright (c) 2018, Linaro Limited +/* + * Copyright (c) 2018, Linaro Limited + */ /dts-v1/; @@ -37,54 +39,54 @@ }; &tlmm { - ethernet_defaults: ethernet-defaults { - int { + ethernet_defaults: ethernet-defaults-state { + int-pins { pins = "gpio61"; function = "rgmii_int"; bias-disable; drive-strength = <2>; }; - mdc { + mdc-pins { pins = "gpio76"; function = "rgmii_mdc"; bias-pull-up; }; - mdio { + mdio-pins { pins = "gpio75"; function = "rgmii_mdio"; bias-pull-up; }; - tx { + tx-pins { pins = "gpio67", "gpio66", "gpio65", "gpio64"; function = "rgmii_tx"; bias-pull-up; drive-strength = <16>; }; - rx { + rx-pins { pins = "gpio73", "gpio72", "gpio71", "gpio70"; function = "rgmii_rx"; bias-disable; drive-strength = <2>; }; - tx-ctl { + tx-ctl-pins { pins = "gpio68"; function = "rgmii_ctl"; bias-pull-up; drive-strength = <16>; }; - rx-ctl { + rx-ctl-pins { pins = "gpio74"; function = "rgmii_ctl"; bias-disable; drive-strength = <2>; }; - tx-ck { + tx-ck-pins { pins = "gpio63"; function = "rgmii_ck"; bias-pull-up; drive-strength = <16>; }; - rx-ck { + rx-ck-pins { pins = "gpio69"; function = "rgmii_ck"; bias-disable; diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi index 1678ef0f8684..04c82d1624eb 100644 --- a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi +++ b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi @@ -1,5 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 -// Copyright (c) 2018, Linaro Limited +/* + * Copyright (c) 2018, Linaro Limited + */ #include <dt-bindings/gpio/gpio.h> #include "qcs404.dtsi" @@ -125,7 +127,7 @@ }; &rpm_requests { - pms405-regulators { + regulators { compatible = "qcom,rpm-pms405-regulators"; vdd_s1-supply = <&vph_pwr>; @@ -229,7 +231,7 @@ }; &tlmm { - perst_state: perst { + perst_state: perst-state { pins = "gpio43"; function = "gpio"; @@ -238,68 +240,63 @@ output-low; }; - sdc1_on: sdc1-on { - clk { + sdc1_on: sdc1-on-state { + clk-pins { pins = "sdc1_clk"; bias-disable; drive-strength = <16>; }; - cmd { + cmd-pins { pins = "sdc1_cmd"; bias-pull-up; drive-strength = <10>; }; - data { + data-pins { pins = "sdc1_data"; bias-pull-up; drive-strength = <10>; }; - rclk { + rclk-pins { pins = "sdc1_rclk"; bias-pull-down; }; }; - sdc1_off: sdc1-off { - clk { + sdc1_off: sdc1-off-state { + clk-pins { pins = "sdc1_clk"; bias-disable; drive-strength = <2>; }; - cmd { + cmd-pins { pins = "sdc1_cmd"; bias-pull-up; drive-strength = <2>; }; - data { + data-pins { pins = "sdc1_data"; bias-pull-up; drive-strength = <2>; }; - rclk { + rclk-pins { pins = "sdc1_rclk"; bias-pull-down; }; }; - usb3_id_pin: usb3-id-pin { - pinmux { - pins = "gpio116"; - function = "gpio"; - }; + usb3_id_pin: usb3-id-state { + pins = "gpio116"; + function = "gpio"; - pinconf { - pins = "gpio116"; - drive-strength = <2>; - bias-pull-up; - input-enable; - }; + drive-strength = <2>; + bias-pull-up; + input-enable; }; }; @@ -366,31 +363,28 @@ /* PINCTRL - additions to nodes defined in qcs404.dtsi */ &blsp1_uart2_default { - rx { + rx-pins { drive-strength = <2>; bias-disable; }; - tx { + tx-pins { drive-strength = <2>; bias-disable; }; }; &blsp1_uart3_default { - cts { - pins = "gpio84"; + cts-pins { bias-disable; }; - rts-tx { - pins = "gpio85", "gpio82"; + rts-tx-pins { drive-strength = <2>; bias-disable; }; - rx { - pins = "gpio83"; + rx-pins { bias-pull-up; }; }; diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi index 80f2d05595fa..a5324eecb50a 100644 --- a/arch/arm64/boot/dts/qcom/qcs404.dtsi +++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi @@ -1,5 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 -// Copyright (c) 2018, Linaro Limited +/* + * Copyright (c) 2018, Linaro Limited + */ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,gcc-qcs404.h> @@ -593,118 +595,130 @@ interrupt-controller; #interrupt-cells = <2>; - blsp1_i2c0_default: blsp1-i2c0-default { + blsp1_i2c0_default: blsp1-i2c0-default-state { pins = "gpio32", "gpio33"; function = "blsp_i2c0"; }; - blsp1_i2c1_default: blsp1-i2c1-default { + blsp1_i2c1_default: blsp1-i2c1-default-state { pins = "gpio24", "gpio25"; function = "blsp_i2c1"; }; - blsp1_i2c2_default: blsp1-i2c2-default { - sda { + blsp1_i2c2_default: blsp1-i2c2-default-state { + sda-pins { pins = "gpio19"; function = "blsp_i2c_sda_a2"; }; - scl { + scl-pins { pins = "gpio20"; function = "blsp_i2c_scl_a2"; }; }; - blsp1_i2c3_default: blsp1-i2c3-default { + blsp1_i2c3_default: blsp1-i2c3-default-state { pins = "gpio84", "gpio85"; function = "blsp_i2c3"; }; - blsp1_i2c4_default: blsp1-i2c4-default { + blsp1_i2c4_default: blsp1-i2c4-default-state { pins = "gpio117", "gpio118"; function = "blsp_i2c4"; }; - blsp1_uart0_default: blsp1-uart0-default { + blsp1_uart0_default: blsp1-uart0-default-state { pins = "gpio30", "gpio31", "gpio32", "gpio33"; function = "blsp_uart0"; }; - blsp1_uart1_default: blsp1-uart1-default { + blsp1_uart1_default: blsp1-uart1-default-state { pins = "gpio22", "gpio23"; function = "blsp_uart1"; }; - blsp1_uart2_default: blsp1-uart2-default { - rx { + blsp1_uart2_default: blsp1-uart2-default-state { + rx-pins { pins = "gpio18"; function = "blsp_uart_rx_a2"; }; - tx { + tx-pins { pins = "gpio17"; function = "blsp_uart_tx_a2"; }; }; - blsp1_uart3_default: blsp1-uart3-default { - pins = "gpio82", "gpio83", "gpio84", "gpio85"; - function = "blsp_uart3"; + blsp1_uart3_default: blsp1-uart3-default-state { + cts-pins { + pins = "gpio84"; + function = "blsp_uart3"; + }; + + rts-tx-pins { + pins = "gpio85", "gpio82"; + function = "blsp_uart3"; + }; + + rx-pins { + pins = "gpio83"; + function = "blsp_uart3"; + }; }; - blsp2_i2c0_default: blsp2-i2c0-default { + blsp2_i2c0_default: blsp2-i2c0-default-state { pins = "gpio28", "gpio29"; function = "blsp_i2c5"; }; - blsp1_spi0_default: blsp1-spi0-default { + blsp1_spi0_default: blsp1-spi0-default-state { pins = "gpio30", "gpio31", "gpio32", "gpio33"; function = "blsp_spi0"; }; - blsp1_spi1_default: blsp1-spi1-default { - mosi { + blsp1_spi1_default: blsp1-spi1-default-state { + mosi-pins { pins = "gpio22"; function = "blsp_spi_mosi_a1"; }; - miso { + miso-pins { pins = "gpio23"; function = "blsp_spi_miso_a1"; }; - cs_n { + cs-n-pins { pins = "gpio24"; function = "blsp_spi_cs_n_a1"; }; - clk { + clk-pins { pins = "gpio25"; function = "blsp_spi_clk_a1"; }; }; - blsp1_spi2_default: blsp1-spi2-default { + blsp1_spi2_default: blsp1-spi2-default-state { pins = "gpio17", "gpio18", "gpio19", "gpio20"; function = "blsp_spi2"; }; - blsp1_spi3_default: blsp1-spi3-default { + blsp1_spi3_default: blsp1-spi3-default-state { pins = "gpio82", "gpio83", "gpio84", "gpio85"; function = "blsp_spi3"; }; - blsp1_spi4_default: blsp1-spi4-default { + blsp1_spi4_default: blsp1-spi4-default-state { pins = "gpio37", "gpio38", "gpio117", "gpio118"; function = "blsp_spi4"; }; - blsp2_spi0_default: blsp2-spi0-default { + blsp2_spi0_default: blsp2-spi0-default-state { pins = "gpio26", "gpio27", "gpio28", "gpio29"; function = "blsp_spi5"; }; - blsp2_uart0_default: blsp2-uart0-default { + blsp2_uart0_default: blsp2-uart0-default-state { pins = "gpio26", "gpio27", "gpio28", "gpio29"; function = "blsp_uart5"; }; diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts index bf8077a1cf9a..4c39cec0b13e 100644 --- a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts +++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts @@ -867,7 +867,7 @@ }; &q6afedai { - qi2s@16 { + dai@16 { reg = <PRIMARY_MI2S_RX>; qcom,sd-lines = <0 1 2 3>; }; @@ -875,7 +875,7 @@ /* TERT I2S Uses 1 I2S SD Lines for audio on LT9611 HDMI Bridge */ &q6afedai { - qi2s@20 { + dai@20 { reg = <TERTIARY_MI2S_RX>; qcom,sd-lines = <0>; }; @@ -1007,7 +1007,7 @@ }; &swr0 { - left_spkr: wsa8810-left{ + left_spkr: speaker@0,3 { compatible = "sdw10217211000"; reg = <0 3>; powerdown-gpios = <&tlmm 130 GPIO_ACTIVE_HIGH>; @@ -1016,7 +1016,7 @@ #sound-dai-cells = <0>; }; - right_spkr: wsa8810-right{ + right_spkr: speaker@0,4 { compatible = "sdw10217211000"; reg = <0 4>; powerdown-gpios = <&tlmm 130 GPIO_ACTIVE_HIGH>; @@ -1210,33 +1210,33 @@ "HST_WLAN_UART_TX", "HST_WLAN_UART_RX"; - lt9611_irq_pin: lt9611-irq { + lt9611_irq_pin: lt9611-irq-state { pins = "gpio63"; function = "gpio"; bias-disable; }; - sdc2_default_state: sdc2-default { - clk { + sdc2_default_state: sdc2-default-state { + clk-pins { pins = "sdc2_clk"; bias-disable; drive-strength = <16>; }; - cmd { + cmd-pins { pins = "sdc2_cmd"; bias-pull-up; drive-strength = <10>; }; - data { + data-pins { pins = "sdc2_data"; bias-pull-up; drive-strength = <10>; }; }; - sdc2_card_det_n: sd-card-det-n { + sdc2_card_det_n: sd-card-det-n-state { pins = "gpio77"; function = "gpio"; bias-pull-up; diff --git a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts index 87ab0e1ecd16..06d0b6edd48a 100644 --- a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts +++ b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts @@ -477,26 +477,26 @@ &tlmm { gpio-reserved-ranges = <0 4>; - sdc2_on: sdc2_on { - clk { + sdc2_on: sdc2-on-state { + clk-pins { pins = "sdc2_clk"; bias-disable; /* No pull */ drive-strength = <16>; /* 16 MA */ }; - cmd { + cmd-pins { pins = "sdc2_cmd"; bias-pull-up; /* pull up */ drive-strength = <16>; /* 16 MA */ }; - data { + data-pins { pins = "sdc2_data"; bias-pull-up; /* pull up */ drive-strength = <16>; /* 16 MA */ }; - sd-cd { + sd-cd-pins { pins = "gpio96"; function = "gpio"; bias-pull-up; /* pull up */ @@ -504,26 +504,26 @@ }; }; - sdc2_off: sdc2_off { - clk { + sdc2_off: sdc2-off-state { + clk-pins { pins = "sdc2_clk"; bias-disable; /* No pull */ drive-strength = <2>; /* 2 MA */ }; - cmd { + cmd-pins { pins = "sdc2_cmd"; bias-pull-up; /* pull up */ drive-strength = <2>; /* 2 MA */ }; - data { + data-pins { pins = "sdc2_data"; bias-pull-up; /* pull up */ drive-strength = <2>; /* 2 MA */ }; - sd-cd { + sd-cd-pins { pins = "gpio96"; function = "gpio"; bias-pull-up; /* pull up */ @@ -531,66 +531,62 @@ }; }; - usb2phy_ac_en1_default: usb2phy_ac_en1_default { - mux { - pins = "gpio113"; - function = "usb2phy_ac"; - bias-disable; - drive-strength = <2>; - }; + usb2phy_ac_en1_default: usb2phy-ac-en1-default-state { + pins = "gpio113"; + function = "usb2phy_ac"; + bias-disable; + drive-strength = <2>; }; - usb2phy_ac_en2_default: usb2phy_ac_en2_default { - mux { - pins = "gpio123"; - function = "usb2phy_ac"; - bias-disable; - drive-strength = <2>; - }; + usb2phy_ac_en2_default: usb2phy-ac-en2-default-state { + pins = "gpio123"; + function = "usb2phy_ac"; + bias-disable; + drive-strength = <2>; }; - ethernet_defaults: ethernet-defaults { - mdc { + ethernet_defaults: ethernet-defaults-state { + mdc-pins { pins = "gpio7"; function = "rgmii"; bias-pull-up; }; - mdio { + mdio-pins { pins = "gpio59"; function = "rgmii"; bias-pull-up; }; - rgmii-rx { + rgmii-rx-pins { pins = "gpio117", "gpio118", "gpio119", "gpio120", "gpio115", "gpio116"; function = "rgmii"; bias-disable; drive-strength = <2>; }; - rgmii-tx { + rgmii-tx-pins { pins = "gpio122", "gpio4", "gpio5", "gpio6", "gpio114", "gpio121"; function = "rgmii"; bias-pull-up; drive-strength = <16>; }; - phy-intr { + phy-intr-pins { pins = "gpio124"; function = "emac_phy"; bias-disable; drive-strength = <8>; }; - pps { + pps-pins { pins = "gpio81"; function = "emac_pps"; bias-disable; drive-strength = <8>; }; - phy-reset { + phy-reset-pins { pins = "gpio79"; function = "gpio"; bias-pull-up; diff --git a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts index b608b82dff03..ff1e6a674913 100644 --- a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts +++ b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts @@ -57,6 +57,13 @@ regulator-max-microvolt = <3072000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; + + vreg_l11a: ldo11 { + regulator-name = "vreg_l11a"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; }; pmm8540-c-regulators { @@ -151,6 +158,76 @@ }; }; +&pcie2a { + perst-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie2a_default>; + + status = "okay"; +}; + +&pcie2a_phy { + vdda-phy-supply = <&vreg_l11a>; + vdda-pll-supply = <&vreg_l3a>; + + status = "okay"; +}; + +&pcie3a { + num-lanes = <2>; + + perst-gpios = <&tlmm 151 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 56 GPIO_ACTIVE_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie3a_default>; + + status = "okay"; +}; + +&pcie3a_phy { + vdda-phy-supply = <&vreg_l11a>; + vdda-pll-supply = <&vreg_l3a>; + + status = "okay"; +}; + +&pcie3b { + perst-gpios = <&tlmm 153 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 130 GPIO_ACTIVE_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie3b_default>; + + status = "okay"; +}; + +&pcie3b_phy { + vdda-phy-supply = <&vreg_l11a>; + vdda-pll-supply = <&vreg_l3a>; + + status = "okay"; +}; + +&pcie4 { + perst-gpios = <&tlmm 141 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 139 GPIO_ACTIVE_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie4_default>; + + status = "okay"; +}; + +&pcie4_phy { + vdda-phy-supply = <&vreg_l11a>; + vdda-pll-supply = <&vreg_l3a>; + + status = "okay"; +}; + &qup2 { status = "okay"; }; @@ -380,3 +457,97 @@ }; /* PINCTRL */ + +&tlmm { + pcie2a_default: pcie2a-default-state { + clkreq-n-pins { + pins = "gpio142"; + function = "pcie2a_clkreq"; + drive-strength = <2>; + bias-pull-up; + }; + + perst-n-pins { + pins = "gpio143"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + wake-n-pins { + pins = "gpio145"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + pcie3a_default: pcie3a-default-state { + clkreq-n-pins { + pins = "gpio150"; + function = "pcie3a_clkreq"; + drive-strength = <2>; + bias-pull-up; + }; + + perst-n-pins { + pins = "gpio151"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + wake-n-pins { + pins = "gpio56"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + pcie3b_default: pcie3b-default-state { + clkreq-n-pins { + pins = "gpio152"; + function = "pcie3b_clkreq"; + drive-strength = <2>; + bias-pull-up; + }; + + perst-n-pins { + pins = "gpio153"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + wake-n-pins { + pins = "gpio130"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + pcie4_default: pcie4-default-state { + clkreq-n-pins { + pins = "gpio140"; + function = "pcie4_clkreq"; + drive-strength = <2>; + bias-pull-up; + }; + + perst-n-pins { + pins = "gpio141"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + wake-n-pins { + pins = "gpio139"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sa8540p.dtsi b/arch/arm64/boot/dts/qcom/sa8540p.dtsi index 8ea2886fbab2..01a24b6a5e6d 100644 --- a/arch/arm64/boot/dts/qcom/sa8540p.dtsi +++ b/arch/arm64/boot/dts/qcom/sa8540p.dtsi @@ -128,6 +128,65 @@ }; }; +&pcie2a { + compatible = "qcom,pcie-sa8540p"; + + linux,pci-domain = <0>; + + interrupts = <GIC_SPI 440 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; +}; + +&pcie2b { + compatible = "qcom,pcie-sa8540p"; + + linux,pci-domain = <1>; + + interrupts = <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; +}; + +&pcie3a { + compatible = "qcom,pcie-sa8540p"; + reg = <0x0 0x01c10000 0x0 0x3000>, + <0x0 0x40000000 0x0 0xf1d>, + <0x0 0x40000f20 0x0 0xa8>, + <0x0 0x40001000 0x0 0x1000>, + <0x0 0x40100000 0x0 0x100000>; + reg-names = "parf", "dbi", "elbi", "atu", "config"; + + ranges = <0x01000000 0x0 0x40200000 0x0 0x40200000 0x0 0x100000>, + <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1d00000>; + + linux,pci-domain = <2>; + + interrupts = <GIC_SPI 567 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + + interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 541 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc 0 0 GIC_SPI 542 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc 0 0 GIC_SPI 543 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc 0 0 GIC_SPI 544 IRQ_TYPE_LEVEL_HIGH>; +}; + +&pcie3b { + compatible = "qcom,pcie-sa8540p"; + + linux,pci-domain = <3>; + + interrupts = <GIC_SPI 565 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; +}; + +&pcie4 { + compatible = "qcom,pcie-sa8540p"; + + linux,pci-domain = <4>; + + interrupts = <GIC_SPI 518 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; +}; + &rpmhpd { compatible = "qcom,sa8540p-rpmhpd"; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts b/arch/arm64/boot/dts/qcom/sc7180-idp.dts index 9dee131b1e24..70fd9ff8dfa2 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-idp.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts @@ -481,287 +481,261 @@ }; &qspi_clk { - pinconf { - pins = "gpio63"; - bias-disable; - }; + bias-disable; }; &qspi_cs0 { - pinconf { - pins = "gpio68"; - bias-disable; - }; + bias-disable; }; &qspi_data01 { - pinconf { - pins = "gpio64", "gpio65"; - - /* High-Z when no transfers; nice to park the lines */ - bias-pull-up; - }; + /* High-Z when no transfers; nice to park the lines */ + bias-pull-up; }; &qup_i2c2_default { - pinconf { - pins = "gpio15", "gpio16"; - drive-strength = <2>; + drive-strength = <2>; - /* Has external pullup */ - bias-disable; - }; + /* Has external pullup */ + bias-disable; }; &qup_i2c4_default { - pinconf { - pins = "gpio115", "gpio116"; - drive-strength = <2>; + drive-strength = <2>; - /* Has external pullup */ - bias-disable; - }; + /* Has external pullup */ + bias-disable; }; &qup_i2c7_default { - pinconf { - pins = "gpio6", "gpio7"; - drive-strength = <2>; + drive-strength = <2>; - /* Has external pullup */ - bias-disable; - }; + /* Has external pullup */ + bias-disable; }; &qup_i2c9_default { - pinconf { - pins = "gpio46", "gpio47"; - drive-strength = <2>; + drive-strength = <2>; - /* Has external pullup */ - bias-disable; - }; + /* Has external pullup */ + bias-disable; }; -&qup_uart3_default { - pinconf-cts { - /* - * Configure a pull-down on CTS to match the pull of - * the Bluetooth module. - */ - pins = "gpio38"; - bias-pull-down; - }; +&qup_uart3_cts { + /* + * Configure a pull-down on CTS to match the pull of + * the Bluetooth module. + */ + bias-pull-down; +}; - pinconf-rts { - /* We'll drive RTS, so no pull */ - pins = "gpio39"; - drive-strength = <2>; - bias-disable; - }; +&qup_uart3_rts { + /* We'll drive RTS, so no pull */ + drive-strength = <2>; + bias-disable; +}; - pinconf-tx { - /* We'll drive TX, so no pull */ - pins = "gpio40"; - drive-strength = <2>; - bias-disable; - }; +&qup_uart3_tx { + /* We'll drive TX, so no pull */ + drive-strength = <2>; + bias-disable; +}; - pinconf-rx { - /* - * Configure a pull-up on RX. This is needed to avoid - * garbage data when the TX pin of the Bluetooth module is - * in tri-state (module powered off or not driving the - * signal yet). - */ - pins = "gpio41"; - bias-pull-up; - }; +&qup_uart3_rx { + /* + * Configure a pull-up on RX. This is needed to avoid + * garbage data when the TX pin of the Bluetooth module is + * in tri-state (module powered off or not driving the + * signal yet). + */ + bias-pull-up; }; -&qup_uart8_default { - pinconf-tx { - pins = "gpio44"; - drive-strength = <2>; - bias-disable; - }; +&qup_uart8_tx { + drive-strength = <2>; + bias-disable; +}; - pinconf-rx { - pins = "gpio45"; - drive-strength = <2>; - bias-pull-up; - }; +&qup_uart8_rx { + drive-strength = <2>; + bias-pull-up; }; -&qup_spi0_default { - pinconf { - pins = "gpio34", "gpio35", "gpio36", "gpio37"; - drive-strength = <2>; - bias-disable; - }; +&qup_spi0_spi { + drive-strength = <2>; + bias-disable; }; -&qup_spi6_default { - pinconf { - pins = "gpio59", "gpio60", "gpio61", "gpio62"; - drive-strength = <2>; - bias-disable; - }; +&qup_spi0_cs { + drive-strength = <2>; + bias-disable; }; -&qup_spi10_default { - pinconf { - pins = "gpio86", "gpio87", "gpio88", "gpio89"; - drive-strength = <2>; - bias-disable; - }; +&qup_spi6_spi { + drive-strength = <2>; + bias-disable; }; -&tlmm { - qup_uart3_sleep: qup-uart3-sleep { - pinmux { - pins = "gpio38", "gpio39", - "gpio40", "gpio41"; - function = "gpio"; - }; +&qup_spi6_cs { + drive-strength = <2>; + bias-disable; +}; + +&qup_spi10_spi { + drive-strength = <2>; + bias-disable; +}; + +&qup_spi10_cs { + drive-strength = <2>; + bias-disable; +}; - pinconf-cts { +&tlmm { + qup_uart3_sleep: qup-uart3-sleep-state { + cts-pins { /* * Configure a pull-down on CTS to match the pull of * the Bluetooth module. */ pins = "gpio38"; + function = "gpio"; bias-pull-down; }; - pinconf-rts { + rts-pins { /* * Configure pull-down on RTS. As RTS is active low * signal, pull it low to indicate the BT SoC that it * can wakeup the system anytime from suspend state by * pulling RX low (by sending wakeup bytes). */ - pins = "gpio39"; - bias-pull-down; + pins = "gpio39"; + function = "gpio"; + bias-pull-down; }; - pinconf-tx { + tx-pins { /* * Configure pull-up on TX when it isn't actively driven * to prevent BT SoC from receiving garbage during sleep. */ pins = "gpio40"; + function = "gpio"; bias-pull-up; }; - pinconf-rx { + rx-pins { /* * Configure a pull-up on RX. This is needed to avoid * garbage data when the TX pin of the Bluetooth module * is floating which may cause spurious wakeups. */ pins = "gpio41"; + function = "gpio"; bias-pull-up; }; }; - sdc1_on: sdc1-on { - pinconf-clk { + sdc1_on: sdc1-on-state { + clk-pins { pins = "sdc1_clk"; bias-disable; drive-strength = <16>; }; - pinconf-cmd { + cmd-pins { pins = "sdc1_cmd"; bias-pull-up; drive-strength = <10>; }; - pinconf-data { + data-pins { pins = "sdc1_data"; bias-pull-up; drive-strength = <10>; }; - pinconf-rclk { + rclk-pins { pins = "sdc1_rclk"; bias-pull-down; }; }; - sdc1_off: sdc1-off { - pinconf-clk { + sdc1_off: sdc1-off-state { + clk-pins { pins = "sdc1_clk"; bias-disable; drive-strength = <2>; }; - pinconf-cmd { + cmd-pins { pins = "sdc1_cmd"; bias-pull-up; drive-strength = <2>; }; - pinconf-data { + data-pins { pins = "sdc1_data"; bias-pull-up; drive-strength = <2>; }; - pinconf-rclk { + rclk-pins { pins = "sdc1_rclk"; bias-pull-down; }; }; - sdc2_on: sdc2-on { - pinconf-clk { + sdc2_on: sdc2-on-state { + clk-pins { pins = "sdc2_clk"; bias-disable; drive-strength = <16>; }; - pinconf-cmd { + cmd-pins { pins = "sdc2_cmd"; bias-pull-up; drive-strength = <10>; }; - pinconf-data { + data-pins { pins = "sdc2_data"; bias-pull-up; drive-strength = <10>; }; - pinconf-sd-cd { + sd-cd-pins { pins = "gpio69"; + function = "gpio"; bias-pull-up; drive-strength = <2>; }; }; - sdc2_off: sdc2-off { - pinconf-clk { + sdc2_off: sdc2-off-state { + clk-pins { pins = "sdc2_clk"; bias-disable; drive-strength = <2>; }; - pinconf-cmd { + cmd-pins { pins = "sdc2_cmd"; bias-pull-up; drive-strength = <2>; }; - pinconf-data { + data-pins { pins = "sdc2_data"; bias-pull-up; drive-strength = <2>; }; - pinconf-sd-cd { + sd-cd-pins { pins = "gpio69"; + function = "gpio"; bias-pull-up; drive-strength = <2>; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi index 7ee407f7b6bb..8b8ea8af165d 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi @@ -181,23 +181,15 @@ ap_ts_pen_1v8: &i2c4 { /* PINCTRL - modifications to sc7180-trogdor.dtsi */ &en_pp3300_dx_edp { - pinmux { - pins = "gpio67"; - }; - - pinconf { - pins = "gpio67"; - }; + pins = "gpio67"; }; &ts_reset_l { - pinconf { - /* - * We want reset state by default and it will be up to the - * driver to disable this when it's ready. - */ - output-low; - }; + /* + * We want reset state by default and it will be up to the + * driver to disable this when it's ready. + */ + output-low; }; /* PINCTRL - board-specific pinctrl */ @@ -327,16 +319,10 @@ ap_ts_pen_1v8: &i2c4 { "DP_HOT_PLUG_DET", "EC_IN_RW_ODL"; - dmic_clk_en: dmic_clk_en { - pinmux { - pins = "gpio83"; - function = "gpio"; - }; - - pinconf { - pins = "gpio83"; - drive-strength = <8>; - bias-pull-up; - }; + dmic_clk_en: dmic-clk-en-state { + pins = "gpio83"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; }; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi index 1bd6c7dcd9e9..70e52fdb606a 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi @@ -180,30 +180,19 @@ ap_ts_pen_1v8: &i2c4 { /* PINCTRL - modifications to sc7180-trogdor.dtsi */ &en_pp3300_dx_edp { - pinmux { - pins = "gpio67"; - }; - - pinconf { - pins = "gpio67"; - }; + pins = "gpio67"; }; -&sec_mi2s_active{ - pinmux { - pins = "gpio49", "gpio50", "gpio51", "gpio52"; - function = "mi2s_1"; - }; +&sec_mi2s_active { + pins = "gpio49", "gpio50", "gpio51", "gpio52"; }; &ts_reset_l { - pinconf { - /* - * We want reset state by default and it will be up to the - * driver to disable this when it's ready. - */ - output-low; - }; + /* + * We want reset state by default and it will be up to the + * driver to disable this when it's ready. + */ + output-low; }; /* PINCTRL - board-specific pinctrl */ @@ -333,16 +322,10 @@ ap_ts_pen_1v8: &i2c4 { "DP_HOT_PLUG_DET", "EC_IN_RW_ODL"; - en_pp3300_touch: en-pp3300-touch { - pinmux { - pins = "gpio87"; - function = "gpio"; - }; - - pinconf { - pins = "gpio87"; - drive-strength = <2>; - bias-disable; - }; + en_pp3300_touch: en-pp3300-touch-state { + pins = "gpio87"; + function = "gpio"; + drive-strength = <2>; + bias-disable; }; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown-r0.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown-r0.dts index 1a62e8d435ab..3abd6222fe46 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown-r0.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown-r0.dts @@ -29,16 +29,10 @@ }; &tlmm { - en_fp_rails: en-fp-rails { - pinmux { - pins = "gpio74"; - function = "gpio"; - }; - - pinconf { - pins = "gpio74"; - drive-strength = <2>; - bias-disable; - }; + en_fp_rails: en-fp-rails-state { + pins = "gpio74"; + function = "gpio"; + drive-strength = <2>; + bias-disable; }; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown.dtsi index 74f0e07ea5cf..4156ad6dbd96 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown.dtsi @@ -87,13 +87,7 @@ ap_ts_pen_1v8: &i2c4 { /* PINCTRL - modifications to sc7180-trogdor.dtsi */ &en_pp3300_dx_edp { - pinmux { - pins = "gpio67"; - }; - - pinconf { - pins = "gpio67"; - }; + pins = "gpio67"; }; /* PINCTRL - board-specific pinctrl */ diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi index 002663d752da..269007d73162 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi @@ -75,21 +75,13 @@ ap_ts_pen_1v8: &i2c4 { /* PINCTRL - modifications to sc7180-trogdor.dtsi */ &trackpad_int_1v8_odl { - pinmux { - pins = "gpio58"; - }; - - pinconf { - pins = "gpio58"; - }; + pins = "gpio58"; }; &ts_reset_l { - pinconf { - /* This pin is not connected on -rev0, pull up to park. */ - /delete-property/bias-disable; - bias-pull-up; - }; + /* This pin is not connected on -rev0, pull up to park. */ + /delete-property/bias-disable; + bias-pull-up; }; /* PINCTRL - board-specific pinctrl */ diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev0.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev0.dtsi index 7bc8402c018e..f4c1f3813664 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev0.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev0.dtsi @@ -24,30 +24,13 @@ /* PINCTRL - modifications to sc7180-trogdor-mrbland.dtsi */ &avdd_lcd_en { - pinmux { - pins = "gpio80"; - }; - - pinconf { - pins = "gpio80"; - }; + pins = "gpio80"; }; &mipi_1800_en { - pinmux { - pins = "gpio81"; - }; - - pinconf { - pins = "gpio81"; - }; + pins = "gpio81"; }; -&vdd_reset_1800 { - pinmux { - pins = "gpio76"; - }; - pinconf { - pins = "gpio76"; - }; +&vdd_reset_1800 { + pins = "gpio76"; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland.dtsi index 97cba7f8064f..5e563655baec 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland.dtsi @@ -160,13 +160,7 @@ pp3300_disp_on: &pp3300_dx_edp { */ tp_en: &en_pp3300_dx_edp { - pinmux { - pins = "gpio85"; - }; - - pinconf { - pins = "gpio85"; - }; + pins = "gpio85"; }; /* PINCTRL - board-specific pinctrl */ @@ -296,55 +290,31 @@ tp_en: &en_pp3300_dx_edp { "DP_HOT_PLUG_DET", "EC_IN_RW_ODL"; - avdd_lcd_en: avdd-lcd-en { - pinmux { - pins = "gpio88"; - function = "gpio"; - }; - - pinconf { - pins = "gpio88"; - drive-strength = <2>; - bias-disable; - }; + avdd_lcd_en: avdd-lcd-en-state { + pins = "gpio88"; + function = "gpio"; + drive-strength = <2>; + bias-disable; }; - avee_lcd_en: avee-lcd-en { - pinmux { - pins = "gpio21"; - function = "gpio"; - }; - - pinconf { - pins = "gpio21"; - drive-strength = <2>; - bias-disable; - }; + avee_lcd_en: avee-lcd-en-state { + pins = "gpio21"; + function = "gpio"; + drive-strength = <2>; + bias-disable; }; - mipi_1800_en: mipi-1800-en { - pinmux { - pins = "gpio86"; - function = "gpio"; - }; - - pinconf { - pins = "gpio86"; - drive-strength = <2>; - bias-disable; - }; + mipi_1800_en: mipi-1800-en-state { + pins = "gpio86"; + function = "gpio"; + drive-strength = <2>; + bias-disable; }; - vdd_reset_1800: vdd-reset-1800 { - pinmux { - pins = "gpio87"; - function = "gpio"; - }; - - pinconf { - pins = "gpio87"; - drive-strength = <2>; - bias-disable; - }; + vdd_reset_1800: vdd-reset-1800-state { + pins = "gpio87"; + function = "gpio"; + drive-strength = <2>; + bias-disable; }; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-parade-ps8640.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-parade-ps8640.dtsi index 6a84fba178d6..070b3acb7baa 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-parade-ps8640.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-parade-ps8640.dtsi @@ -83,29 +83,17 @@ edp_brij_i2c: &i2c2 { }; &tlmm { - edp_brij_ps8640_rst: edp-brij-ps8640-rst { - pinmux { - pins = "gpio11"; - function = "gpio"; - }; - - pinconf { - pins = "gpio11"; - drive-strength = <2>; - bias-disable; - }; + edp_brij_ps8640_rst: edp-brij-ps8640-rst-state { + pins = "gpio11"; + function = "gpio"; + drive-strength = <2>; + bias-disable; }; - en_pp3300_edp_brij_ps8640: en-pp3300-edp-brij-ps8640 { - pinmux { - pins = "gpio32"; - function = "gpio"; - }; - - pinconf { - pins = "gpio32"; - drive-strength = <2>; - bias-disable; - }; + en_pp3300_edp_brij_ps8640: en-pp3300-edp-brij-ps8640-state { + pins = "gpio32"; + function = "gpio"; + drive-strength = <2>; + bias-disable; }; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel.dtsi index 56d787785fd5..d06cc4ea3375 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel.dtsi @@ -84,13 +84,7 @@ }; &en_pp3300_dx_edp { - pinmux { - pins = "gpio67"; - }; - - pinconf { - pins = "gpio67"; - }; + pins = "gpio67"; }; /* PINCTRL - board-specific pinctrl */ diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel360-lte.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel360-lte.dts new file mode 100644 index 000000000000..021bcafcf815 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel360-lte.dts @@ -0,0 +1,22 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Pazquel board device tree source + * + * Copyright 2021 Google LLC. + */ + +/dts-v1/; + +#include "sc7180-trogdor.dtsi" +#include "sc7180-trogdor-parade-ps8640.dtsi" +#include "sc7180-trogdor-pazquel360.dtsi" +#include "sc7180-trogdor-lte-sku.dtsi" + +/ { + model = "Google Pazquel (Parade,LTE)"; + compatible = "google,pazquel-sku22", "google,pazquel-sku20", "qcom,sc7180"; +}; + +&ap_sar_sensor_i2c { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel360-wifi.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel360-wifi.dts new file mode 100644 index 000000000000..defd84c5354a --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel360-wifi.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Pazquel board device tree source + * + * Copyright 2022 Google LLC. + */ + +/dts-v1/; + +#include "sc7180-trogdor.dtsi" +#include "sc7180-trogdor-parade-ps8640.dtsi" +#include "sc7180-trogdor-pazquel360.dtsi" + +/ { + model = "Google Pazquel (Parade,WIFI-only)"; + compatible = "google,pazquel-sku21", "qcom,sc7180"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel360.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel360.dtsi new file mode 100644 index 000000000000..5702325d0c7b --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel360.dtsi @@ -0,0 +1,50 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Pazquel board device tree source + * + * Copyright 2021 Google LLC. + */ + +/* This file must be included after sc7180-trogdor.dtsi */ +#include "sc7180-trogdor-pazquel.dtsi" + +&alc5682 { + compatible = "realtek,rt5682s"; + realtek,dmic1-clk-pin = <2>; + realtek,dmic-clk-rate-hz = <2048000>; +}; + +&keyboard_controller { + function-row-physmap = < + MATRIX_KEY(0x00, 0x02, 0) /* T1 */ + MATRIX_KEY(0x03, 0x02, 0) /* T2 */ + MATRIX_KEY(0x02, 0x02, 0) /* T3 */ + MATRIX_KEY(0x01, 0x02, 0) /* T4 */ + MATRIX_KEY(0x03, 0x04, 0) /* T5 */ + MATRIX_KEY(0x02, 0x04, 0) /* T6 */ + MATRIX_KEY(0x01, 0x04, 0) /* T7 */ + MATRIX_KEY(0x02, 0x09, 0) /* T8 */ + MATRIX_KEY(0x01, 0x09, 0) /* T9 */ + MATRIX_KEY(0x00, 0x04, 0) /* T10 */ + MATRIX_KEY(0x03, 0x09, 0) /* T11 */ + >; + linux,keymap = < + MATRIX_KEY(0x00, 0x02, KEY_BACK) + MATRIX_KEY(0x03, 0x02, KEY_REFRESH) + MATRIX_KEY(0x02, 0x02, KEY_ZOOM) + MATRIX_KEY(0x01, 0x02, KEY_SCALE) + MATRIX_KEY(0x03, 0x04, KEY_SYSRQ) + MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN) + MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP) + MATRIX_KEY(0x02, 0x09, KEY_MUTE) + MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN) + MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP) + MATRIX_KEY(0x03, 0x09, KEY_SLEEP) + CROS_STD_MAIN_KEYMAP + >; +}; + +&sound { + compatible = "google,sc7180-trogdor"; + model = "sc7180-rt5682s-max98357a-1mic"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi index a7582fb547ee..6c5287bd27d6 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi @@ -312,15 +312,9 @@ ap_ts_pen_1v8: &i2c4 { "DP_HOT_PLUG_DET", "EC_IN_RW_ODL"; - dmic_sel: dmic-sel { - pinmux { - pins = "gpio86"; - function = "gpio"; - }; - - pinconf { - pins = "gpio86"; - bias-pull-down; - }; + dmic_sel: dmic-sel-state { + pins = "gpio86"; + function = "gpio"; + bias-pull-down; }; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi index 695b04fe7221..c1367999eafb 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi @@ -147,13 +147,7 @@ pp3300_disp_on: &pp3300_dx_edp { */ tp_en: &en_pp3300_dx_edp { - pinmux { - pins = "gpio67"; - }; - - pinconf { - pins = "gpio67"; - }; + pins = "gpio67"; }; /* PINCTRL - board-specific pinctrl */ @@ -283,42 +277,24 @@ tp_en: &en_pp3300_dx_edp { "DP_HOT_PLUG_DET", "EC_IN_RW_ODL"; - lcd_rst: lcd-rst { - pinmux { - pins = "gpio87"; - function = "gpio"; - }; - - pinconf { - pins = "gpio87"; - drive-strength = <2>; - bias-disable; - }; + lcd_rst: lcd-rst-state { + pins = "gpio87"; + function = "gpio"; + drive-strength = <2>; + bias-disable; }; - ppvar_lcd_en: ppvar-lcd-en { - pinmux { - pins = "gpio88"; - function = "gpio"; - }; - - pinconf { - pins = "gpio88"; - drive-strength = <2>; - bias-disable; - }; + ppvar_lcd_en: ppvar-lcd-en-state { + pins = "gpio88"; + function = "gpio"; + drive-strength = <2>; + bias-disable; }; - pp1800_disp_on: pp1800-disp-on { - pinmux { - pins = "gpio86"; - function = "gpio"; - }; - - pinconf { - pins = "gpio86"; - drive-strength = <2>; - bias-disable; - }; + pp1800_disp_on: pp1800-disp-on-state { + pins = "gpio86"; + function = "gpio"; + drive-strength = <2>; + bias-disable; }; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts index bc097d1b1b23..671b3691f1bb 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts @@ -63,13 +63,7 @@ ap_ts_pen_1v8: &i2c4 { /* PINCTRL - modifications to sc7180-trogdor.dtsi */ &trackpad_int_1v8_odl { - pinmux { - pins = "gpio58"; - }; - - pinconf { - pins = "gpio58"; - }; + pins = "gpio58"; }; /* PINCTRL - board-specific pinctrl */ diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi index f869e6a343c1..65333709e529 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi @@ -76,16 +76,10 @@ edp_brij_i2c: &i2c2 { }; &tlmm { - edp_brij_irq: edp-brij-irq { - pinmux { - pins = "gpio11"; - function = "gpio"; - }; - - pinconf { - pins = "gpio11"; - drive-strength = <2>; - bias-pull-down; - }; + edp_brij_irq: edp-brij-irq-state { + pins = "gpio11"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; }; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev0.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev0.dtsi index db29e0cba29d..7f272c6e95f6 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev0.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev0.dtsi @@ -24,30 +24,13 @@ /* PINCTRL - modifications to sc7180-trogdor-wormdingler.dtsi */ &avdd_lcd_en { - pinmux { - pins = "gpio80"; - }; - - pinconf { - pins = "gpio80"; - }; + pins = "gpio80"; }; &mipi_1800_en { - pinmux { - pins = "gpio81"; - }; - - pinconf { - pins = "gpio81"; - }; + pins = "gpio81"; }; -&vdd_reset_1800 { - pinmux { - pins = "gpio76"; - }; - pinconf { - pins = "gpio76"; - }; +&vdd_reset_1800 { + pins = "gpio76"; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi index 6312108e8b3e..123989ba97e1 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi @@ -222,13 +222,7 @@ pp3300_disp_on: &pp3300_dx_edp { */ tp_en: &en_pp3300_dx_edp { - pinmux { - pins = "gpio85"; - }; - - pinconf { - pins = "gpio85"; - }; + pins = "gpio85"; }; /* PINCTRL - board-specific pinctrl */ @@ -358,55 +352,31 @@ tp_en: &en_pp3300_dx_edp { "DP_HOT_PLUG_DET", "EC_IN_RW_ODL"; - avdd_lcd_en: avdd-lcd-en { - pinmux { - pins = "gpio88"; - function = "gpio"; - }; - - pinconf { - pins = "gpio88"; - drive-strength = <2>; - bias-disable; - }; + avdd_lcd_en: avdd-lcd-en-state { + pins = "gpio88"; + function = "gpio"; + drive-strength = <2>; + bias-disable; }; - avee_lcd_en: avee-lcd-en { - pinmux { - pins = "gpio21"; - function = "gpio"; - }; - - pinconf { - pins = "gpio21"; - drive-strength = <2>; - bias-disable; - }; + avee_lcd_en: avee-lcd-en-state { + pins = "gpio21"; + function = "gpio"; + drive-strength = <2>; + bias-disable; }; - mipi_1800_en: mipi-1800-en { - pinmux { - pins = "gpio86"; - function = "gpio"; - }; - - pinconf { - pins = "gpio86"; - drive-strength = <2>; - bias-disable; - }; + mipi_1800_en: mipi-1800-en-state { + pins = "gpio86"; + function = "gpio"; + drive-strength = <2>; + bias-disable; }; - vdd_reset_1800: vdd-reset-1800 { - pinmux { - pins = "gpio87"; - function = "gpio"; - }; - - pinconf { - pins = "gpio87"; - drive-strength = <2>; - bias-disable; - }; + vdd_reset_1800: vdd-reset-1800-state { + pins = "gpio87"; + function = "gpio"; + drive-strength = <2>; + bias-disable; }; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi index eae22e6e97c1..65601bea0797 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi @@ -880,27 +880,30 @@ hp_i2c: &i2c9 { }; &spi0 { - pinctrl-0 = <&qup_spi0_cs_gpio_init_high>, <&qup_spi0_cs_gpio>; + pinctrl-0 = <&qup_spi0_spi>, <&qup_spi0_cs_gpio>; cs-gpios = <&tlmm 37 GPIO_ACTIVE_LOW>; }; &spi6 { - pinctrl-0 = <&qup_spi6_cs_gpio_init_high>, <&qup_spi6_cs_gpio>; + pinctrl-0 = <&qup_spi6_spi>, <&qup_spi6_cs_gpio>; cs-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>; }; ap_spi_fp: &spi10 { - pinctrl-0 = <&qup_spi10_cs_gpio_init_high>, <&qup_spi10_cs_gpio>; + pinctrl-0 = <&qup_spi10_spi>, <&qup_spi10_cs_gpio>; cs-gpios = <&tlmm 89 GPIO_ACTIVE_LOW>; cros_ec_fp: ec@0 { - compatible = "google,cros-ec-spi"; + compatible = "google,cros-ec-fp", "google,cros-ec-spi"; reg = <0>; interrupt-parent = <&tlmm>; interrupts = <4 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; - pinctrl-0 = <&fp_to_ap_irq_l>; + pinctrl-0 = <&fp_to_ap_irq_l>, <&fp_rst_l>, <&fpmcu_boot0>; + boot0-gpios = <&tlmm 10 GPIO_ACTIVE_HIGH>; + reset-gpios = <&tlmm 22 GPIO_ACTIVE_LOW>; spi-max-frequency = <3000000>; + vdd-supply = <&pp3300_fp_tp>; }; }; @@ -997,175 +1000,141 @@ ap_spi_fp: &spi10 { /* PINCTRL - additions to nodes defined in sc7180.dtsi */ &dp_hot_plug_det { - pinconf { - pins = "gpio117"; - bias-disable; - }; + bias-disable; }; &pri_mi2s_active { - pinconf { - pins = "gpio53", "gpio54", "gpio55", "gpio56"; - drive-strength = <2>; - bias-pull-down; - }; + drive-strength = <2>; + bias-pull-down; }; &pri_mi2s_mclk_active { - pinconf { - pins = "gpio57"; - drive-strength = <2>; - bias-pull-down; - }; + drive-strength = <2>; + bias-pull-down; }; &qspi_cs0 { - pinconf { - pins = "gpio68"; - bias-disable; - }; + bias-disable; }; &qspi_clk { - pinconf { - pins = "gpio63"; - drive-strength = <8>; - bias-disable; - }; + drive-strength = <8>; + bias-disable; }; &qspi_data01 { - pinconf { - pins = "gpio64", "gpio65"; - - /* High-Z when no transfers; nice to park the lines */ - bias-pull-up; - }; + /* High-Z when no transfers; nice to park the lines */ + bias-pull-up; }; &qup_i2c2_default { - pinconf { - pins = "gpio15", "gpio16"; - drive-strength = <2>; + drive-strength = <2>; - /* Has external pullup */ - bias-disable; - }; + /* Has external pullup */ + bias-disable; }; &qup_i2c4_default { - pinconf { - pins = "gpio115", "gpio116"; - drive-strength = <2>; + drive-strength = <2>; - /* Has external pullup */ - bias-disable; - }; + /* Has external pullup */ + bias-disable; }; &qup_i2c5_default { - pinconf { - pins = "gpio25", "gpio26"; - drive-strength = <2>; + drive-strength = <2>; - /* Has external pullup */ - bias-disable; - }; + /* Has external pullup */ + bias-disable; }; &qup_i2c7_default { - pinconf { - pins = "gpio6", "gpio7"; - drive-strength = <2>; + drive-strength = <2>; - /* Has external pullup */ - bias-disable; - }; + /* Has external pullup */ + bias-disable; }; &qup_i2c9_default { - pinconf { - pins = "gpio46", "gpio47"; - drive-strength = <2>; + drive-strength = <2>; - /* Has external pullup */ - bias-disable; - }; + /* Has external pullup */ + bias-disable; +}; + +&qup_spi0_spi { + drive-strength = <2>; + bias-disable; }; &qup_spi0_cs_gpio { - pinconf { - pins = "gpio34", "gpio35", "gpio36", "gpio37"; - drive-strength = <2>; - bias-disable; - }; + drive-strength = <2>; + bias-disable; +}; + +&qup_spi6_spi { + drive-strength = <2>; + bias-disable; }; &qup_spi6_cs_gpio { - pinconf { - pins = "gpio59", "gpio60", "gpio61", "gpio62"; - drive-strength = <2>; - bias-disable; - }; + drive-strength = <2>; + bias-disable; +}; + +&qup_spi10_spi { + drive-strength = <2>; + bias-disable; }; &qup_spi10_cs_gpio { - pinconf { - pins = "gpio86", "gpio87", "gpio88", "gpio89"; - drive-strength = <2>; - bias-disable; - }; + drive-strength = <2>; + bias-disable; }; -&qup_uart3_default { - pinconf-cts { - /* - * Configure a pull-down on CTS to match the pull of - * the Bluetooth module. - */ - pins = "gpio38"; - bias-pull-down; - }; +&qup_uart3_cts { + /* + * Configure a pull-down on CTS to match the pull of + * the Bluetooth module. + */ + bias-pull-down; +}; - pinconf-rts-tx { - /* We'll drive RTS and TX, so no pull */ - pins = "gpio39", "gpio40"; - drive-strength = <2>; - bias-disable; - }; +&qup_uart3_rts { + /* We'll drive RTS, so no pull */ + drive-strength = <2>; + bias-disable; +}; - pinconf-rx { - /* - * Configure a pull-up on RX. This is needed to avoid - * garbage data when the TX pin of the Bluetooth module is - * in tri-state (module powered off or not driving the - * signal yet). - */ - pins = "gpio41"; - bias-pull-up; - }; +&qup_uart3_tx { + /* We'll drive TX, so no pull */ + drive-strength = <2>; + bias-disable; }; -&qup_uart8_default { - pinconf-tx { - pins = "gpio44"; - drive-strength = <2>; - bias-disable; - }; +&qup_uart3_rx { + /* + * Configure a pull-up on RX. This is needed to avoid + * garbage data when the TX pin of the Bluetooth module is + * in tri-state (module powered off or not driving the + * signal yet). + */ + bias-pull-up; +}; - pinconf-rx { - pins = "gpio45"; - drive-strength = <2>; - bias-pull-up; - }; +&qup_uart8_tx { + drive-strength = <2>; + bias-disable; +}; + +&qup_uart8_rx { + drive-strength = <2>; + bias-pull-up; }; &sec_mi2s_active { - pinconf { - pins = "gpio49", "gpio50", "gpio51"; - drive-strength = <2>; - bias-pull-down; - }; + drive-strength = <2>; + bias-pull-down; }; /* PINCTRL - board-specific pinctrl */ @@ -1196,468 +1165,337 @@ ap_spi_fp: &spi10 { pinctrl-names = "default"; pinctrl-0 = <&bios_flash_wp_l>, <&ap_suspend_l_neuter>; - amp_en: amp-en { - pinmux { - pins = "gpio23"; - function = "gpio"; - }; - - pinconf { - pins = "gpio23"; - bias-pull-down; - }; + amp_en: amp-en-state { + pins = "gpio23"; + function = "gpio"; + bias-pull-down; }; - ap_ec_int_l: ap-ec-int-l { - pinmux { - pins = "gpio94"; - function = "gpio"; - input-enable; - }; - - pinconf { - pins = "gpio94"; - bias-pull-up; - }; + ap_ec_int_l: ap-ec-int-l-state { + pins = "gpio94"; + function = "gpio"; + input-enable; + bias-pull-up; }; - ap_edp_bklten: ap-edp-bklten { - pinmux { - pins = "gpio12"; - function = "gpio"; - }; - - pinconf { - pins = "gpio12"; - drive-strength = <2>; - bias-disable; + ap_edp_bklten: ap-edp-bklten-state { + pins = "gpio12"; + function = "gpio"; + drive-strength = <2>; + bias-disable; - /* Force backlight to be disabled to match state at boot. */ - output-low; - }; + /* Force backlight to be disabled to match state at boot. */ + output-low; }; - ap_suspend_l_neuter: ap-suspend-l-neuter { - pinmux { - pins = "gpio27"; - function = "gpio"; - }; - - pinconf { - pins = "gpio27"; - bias-disable; - }; + ap_suspend_l_neuter: ap-suspend-l-neuter-state { + pins = "gpio27"; + function = "gpio"; + bias-disable; }; - bios_flash_wp_l: bios-flash-wp-l { - pinmux { - pins = "gpio66"; - function = "gpio"; - input-enable; - }; - - pinconf { - pins = "gpio66"; - bias-disable; - }; + bios_flash_wp_l: bios-flash-wp-l-state { + pins = "gpio66"; + function = "gpio"; + input-enable; + bias-disable; }; - edp_brij_en: edp-brij-en { - pinmux { - pins = "gpio104"; - function = "gpio"; - }; - - pinconf { - pins = "gpio104"; - drive-strength = <2>; - bias-disable; - }; + edp_brij_en: edp-brij-en-state { + pins = "gpio104"; + function = "gpio"; + drive-strength = <2>; + bias-disable; }; - en_pp3300_codec: en-pp3300-codec { - pinmux { - pins = "gpio83"; - function = "gpio"; - }; - - pinconf { - pins = "gpio83"; - drive-strength = <2>; - bias-disable; - }; + en_pp3300_codec: en-pp3300-codec-state { + pins = "gpio83"; + function = "gpio"; + drive-strength = <2>; + bias-disable; }; - en_pp3300_dx_edp: en-pp3300-dx-edp { - pinmux { - pins = "gpio30"; - function = "gpio"; - }; - - pinconf { - pins = "gpio30"; - drive-strength = <2>; - bias-disable; - }; + en_pp3300_dx_edp: en-pp3300-dx-edp-state { + pins = "gpio30"; + function = "gpio"; + drive-strength = <2>; + bias-disable; }; - en_pp3300_hub: en-pp3300-hub { - pinmux { - pins = "gpio84"; - function = "gpio"; - }; - - pinconf { - pins = "gpio84"; - drive-strength = <2>; - bias-disable; - }; + en_pp3300_hub: en-pp3300-hub-state { + pins = "gpio84"; + function = "gpio"; + drive-strength = <2>; + bias-disable; }; - fp_to_ap_irq_l: fp-to-ap-irq-l { - pinmux { - pins = "gpio4"; - function = "gpio"; - input-enable; - }; - - pinconf { - pins = "gpio4"; - - /* Has external pullup */ - bias-disable; - }; + fp_rst_l: fp-rst-l-state { + pins = "gpio22"; + function = "gpio"; + bias-disable; + drive-strength = <2>; }; - h1_ap_int_odl: h1-ap-int-odl { - pinmux { - pins = "gpio42"; - function = "gpio"; - input-enable; - }; + fp_to_ap_irq_l: fp-to-ap-irq-l-state { + pins = "gpio4"; + function = "gpio"; + input-enable; - pinconf { - pins = "gpio42"; - bias-pull-up; - }; + /* Has external pullup */ + bias-disable; }; - hp_irq: hp-irq { - pinmux { - pins = "gpio28"; - function = "gpio"; - }; - - pinconf { - pins = "gpio28"; - bias-pull-up; - }; + fpmcu_boot0: fpmcu-boot0-state { + pins = "gpio10"; + function = "gpio"; + bias-disable; }; - pen_irq_l: pen-irq-l { - pinmux { - pins = "gpio21"; - function = "gpio"; - }; - - pinconf { - pins = "gpio21"; - - /* Has external pullup */ - bias-disable; - }; + h1_ap_int_odl: h1-ap-int-odl-state { + pins = "gpio42"; + function = "gpio"; + input-enable; + bias-pull-up; }; - pen_pdct_l: pen-pdct-l { - pinmux { - pins = "gpio52"; - function = "gpio"; - }; - - pinconf { - pins = "gpio52"; - - /* Has external pullup */ - bias-disable; - }; + hp_irq: hp-irq-state { + pins = "gpio28"; + function = "gpio"; + bias-pull-up; }; - pen_rst_odl: pen-rst-odl { - pinmux { - pins = "gpio18"; - function = "gpio"; - }; + pen_irq_l: pen-irq-l-state { + pins = "gpio21"; + function = "gpio"; - pinconf { - pins = "gpio18"; - bias-disable; - drive-strength = <2>; - - /* - * The pen driver doesn't currently support - * driving this reset line. By specifying - * output-high here we're relying on the fact - * that this pin has a default pulldown at boot - * (which makes sure the pen was in reset if it - * was powered) and then we set it high here to - * take it out of reset. Better would be if the - * pen driver could control this and we could - * remove "output-high" here. - */ - output-high; /* TODO: Remove this? */ - }; + /* Has external pullup */ + bias-disable; }; - p_sensor_int_l: p-sensor-int-l { - pinmux { - pins = "gpio24"; - function = "gpio"; - input-enable; - }; + pen_pdct_l: pen-pdct-l-state-state { + pins = "gpio52"; + function = "gpio"; - pinconf { - pins = "gpio24"; - /* Has external pullup */ - bias-disable; - }; + /* Has external pullup */ + bias-disable; }; - qup_spi0_cs_gpio_init_high: qup-spi0-cs-gpio-init-high { - pinconf { - pins = "gpio37"; - output-high; - }; - }; + pen_rst_odl: pen-rst-odl-state { + pins = "gpio18"; + function = "gpio"; + bias-disable; + drive-strength = <2>; - qup_spi6_cs_gpio_init_high: qup-spi6-cs-gpio-init-high { - pinconf { - pins = "gpio62"; - output-high; - }; + /* + * The pen driver doesn't currently support + * driving this reset line. By specifying + * output-high here we're relying on the fact + * that this pin has a default pulldown at boot + * (which makes sure the pen was in reset if it + * was powered) and then we set it high here to + * take it out of reset. Better would be if the + * pen driver could control this and we could + * remove "output-high" here. + */ + output-high; /* TODO: Remove this? */ }; - qup_spi10_cs_gpio_init_high: qup-spi10-cs-gpio-init-high { - pinconf { - pins = "gpio89"; - output-high; - }; - }; + p_sensor_int_l: p-sensor-int-l-state { + pins = "gpio24"; + function = "gpio"; + input-enable; - qup_uart3_sleep: qup-uart3-sleep { - pinmux { - pins = "gpio38", "gpio39", - "gpio40", "gpio41"; - function = "gpio"; - }; + /* Has external pullup */ + bias-disable; + }; - pinconf-cts { + qup_uart3_sleep: qup-uart3-sleep-state { + cts-pins { /* * Configure a pull-down on CTS to match the pull of * the Bluetooth module. */ pins = "gpio38"; + function = "gpio"; bias-pull-down; }; - pinconf-rts { + rts-pins { /* * Configure pull-down on RTS. As RTS is active low * signal, pull it low to indicate the BT SoC that it * can wakeup the system anytime from suspend state by * pulling RX low (by sending wakeup bytes). */ - pins = "gpio39"; - bias-pull-down; + pins = "gpio39"; + function = "gpio"; + bias-pull-down; }; - pinconf-tx { + tx-pins { /* * Configure pull-up on TX when it isn't actively driven * to prevent BT SoC from receiving garbage during sleep. */ pins = "gpio40"; + function = "gpio"; bias-pull-up; }; - pinconf-rx { + rx-pins { /* * Configure a pull-up on RX. This is needed to avoid * garbage data when the TX pin of the Bluetooth module * is floating which may cause spurious wakeups. */ pins = "gpio41"; + function = "gpio"; bias-pull-up; }; }; /* Named trackpad_int_1v8_odl on earlier revision schematics */ trackpad_int_1v8_odl: - tp_int_odl: tp-int-odl { - pinmux { - pins = "gpio0"; - function = "gpio"; - }; - - pinconf { - pins = "gpio0"; + tp_int_odl: tp-int-odl-state { + pins = "gpio0"; + function = "gpio"; - /* Has external pullup */ - bias-disable; - }; + /* Has external pullup */ + bias-disable; }; - ts_int_l: ts-int-l { - pinmux { - pins = "gpio9"; - function = "gpio"; - }; - - pinconf { - pins = "gpio9"; - bias-pull-up; - }; + ts_int_l: ts-int-l-state { + pins = "gpio9"; + function = "gpio"; + bias-pull-up; }; - ts_reset_l: ts-reset-l { - pinmux { - pins = "gpio8"; - function = "gpio"; - }; - - pinconf { - pins = "gpio8"; - bias-disable; - drive-strength = <2>; - }; + ts_reset_l: ts-reset-l-state { + pins = "gpio8"; + function = "gpio"; + bias-disable; + drive-strength = <2>; }; - sdc1_on: sdc1-on { - pinconf-clk { + sdc1_on: sdc1-on-state { + clk-pins { pins = "sdc1_clk"; bias-disable; drive-strength = <16>; }; - pinconf-cmd { + cmd-pins { pins = "sdc1_cmd"; bias-pull-up; drive-strength = <16>; }; - pinconf-data { + data-pins { pins = "sdc1_data"; bias-pull-up; drive-strength = <16>; }; - pinconf-rclk { + rclk-pins { pins = "sdc1_rclk"; bias-pull-down; }; }; - sdc1_off: sdc1-off { - pinconf-clk { + sdc1_off: sdc1-off-state { + clk-pins { pins = "sdc1_clk"; bias-disable; drive-strength = <2>; }; - pinconf-cmd { + cmd-pins { pins = "sdc1_cmd"; bias-pull-up; drive-strength = <2>; }; - pinconf-data { + data-pins { pins = "sdc1_data"; bias-pull-up; drive-strength = <2>; }; - pinconf-rclk { + rclk-pins { pins = "sdc1_rclk"; bias-pull-down; }; }; - sdc2_on: sdc2-on { - pinconf-clk { + sdc2_on: sdc2-on-state { + clk-pins { pins = "sdc2_clk"; bias-disable; drive-strength = <16>; }; - pinconf-cmd { + cmd-pins { pins = "sdc2_cmd"; bias-pull-up; drive-strength = <10>; }; - pinconf-data { + data-pins { pins = "sdc2_data"; bias-pull-up; drive-strength = <10>; }; - pinconf-sd-cd { + sd-cd-pins { pins = "gpio69"; + function = "gpio"; bias-pull-up; drive-strength = <2>; }; }; - sdc2_off: sdc2-off { - pinconf-clk { + sdc2_off: sdc2-off-state { + clk-pins { pins = "sdc2_clk"; bias-disable; drive-strength = <2>; }; - pinconf-cmd { + cmd-pins { pins = "sdc2_cmd"; bias-pull-up; drive-strength = <2>; }; - pinconf-data { + data-pins { pins = "sdc2_data"; bias-pull-up; drive-strength = <2>; }; - pinconf-sd-cd { + sd-cd-pins { pins = "gpio69"; + function = "gpio"; bias-pull-up; drive-strength = <2>; }; }; - uf_cam_en: uf-cam-en { - pinmux { - pins = "gpio6"; - function = "gpio"; - }; + uf_cam_en: uf-cam-en-state { + pins = "gpio6"; + function = "gpio"; + drive-strength = <2>; - pinconf { - pins = "gpio6"; - drive-strength = <2>; - /* External pull down */ - bias-disable; - }; + /* External pull down */ + bias-disable; }; - wf_cam_en: wf-cam-en { - pinmux { - pins = "gpio7"; - function = "gpio"; - }; + wf_cam_en: wf-cam-en-state { + pins = "gpio7"; + function = "gpio"; + drive-strength = <2>; - pinconf { - pins = "gpio7"; - drive-strength = <2>; - /* External pull down */ - bias-disable; - }; + /* External pull down */ + bias-disable; }; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi index 58976a1ba06b..ea886cf08b4d 100644 --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi @@ -662,6 +662,7 @@ #clock-cells = <1>; #reset-cells = <1>; #power-domain-cells = <1>; + power-domains = <&rpmhpd SC7180_CX>; }; qfprom: efuse@784000 { @@ -795,7 +796,7 @@ clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; pinctrl-names = "default"; - pinctrl-0 = <&qup_spi0_default>; + pinctrl-0 = <&qup_spi0_spi>, <&qup_spi0_cs>; interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; @@ -849,7 +850,7 @@ clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; pinctrl-names = "default"; - pinctrl-0 = <&qup_spi1_default>; + pinctrl-0 = <&qup_spi1_spi>, <&qup_spi1_cs>; interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; @@ -939,7 +940,7 @@ clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; pinctrl-names = "default"; - pinctrl-0 = <&qup_spi3_default>; + pinctrl-0 = <&qup_spi3_spi>, <&qup_spi3_cs>; interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; @@ -1029,7 +1030,7 @@ clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; pinctrl-names = "default"; - pinctrl-0 = <&qup_spi5_default>; + pinctrl-0 = <&qup_spi5_spi>, <&qup_spi5_cs>; interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; @@ -1096,7 +1097,7 @@ clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; pinctrl-names = "default"; - pinctrl-0 = <&qup_spi6_default>; + pinctrl-0 = <&qup_spi6_spi>, <&qup_spi6_cs>; interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; @@ -1186,7 +1187,7 @@ clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; pinctrl-names = "default"; - pinctrl-0 = <&qup_spi8_default>; + pinctrl-0 = <&qup_spi8_spi>, <&qup_spi8_cs>; interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; @@ -1276,7 +1277,7 @@ clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; pinctrl-names = "default"; - pinctrl-0 = <&qup_spi10_default>; + pinctrl-0 = <&qup_spi10_spi>, <&qup_spi10_cs>; interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; @@ -1330,7 +1331,7 @@ clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; pinctrl-names = "default"; - pinctrl-0 = <&qup_spi11_default>; + pinctrl-0 = <&qup_spi11_spi>, <&qup_spi11_cs>; interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; @@ -1486,410 +1487,443 @@ gpio-ranges = <&tlmm 0 0 120>; wakeup-parent = <&pdc>; - dp_hot_plug_det: dp-hot-plug-det { - pinmux { - pins = "gpio117"; - function = "dp_hot"; - }; + dp_hot_plug_det: dp-hot-plug-det-state { + pins = "gpio117"; + function = "dp_hot"; }; - qspi_clk: qspi-clk { - pinmux { - pins = "gpio63"; - function = "qspi_clk"; - }; + qspi_clk: qspi-clk-state { + pins = "gpio63"; + function = "qspi_clk"; }; - qspi_cs0: qspi-cs0 { - pinmux { - pins = "gpio68"; - function = "qspi_cs"; - }; + qspi_cs0: qspi-cs0-state { + pins = "gpio68"; + function = "qspi_cs"; }; - qspi_cs1: qspi-cs1 { - pinmux { - pins = "gpio72"; - function = "qspi_cs"; - }; + qspi_cs1: qspi-cs1-state { + pins = "gpio72"; + function = "qspi_cs"; }; - qspi_data01: qspi-data01 { - pinmux-data { - pins = "gpio64", "gpio65"; - function = "qspi_data"; - }; + qspi_data01: qspi-data01-state { + pins = "gpio64", "gpio65"; + function = "qspi_data"; }; - qspi_data12: qspi-data12 { - pinmux-data { - pins = "gpio66", "gpio67"; - function = "qspi_data"; - }; + qspi_data12: qspi-data12-state { + pins = "gpio66", "gpio67"; + function = "qspi_data"; }; - qup_i2c0_default: qup-i2c0-default { - pinmux { - pins = "gpio34", "gpio35"; - function = "qup00"; - }; + qup_i2c0_default: qup-i2c0-default-state { + pins = "gpio34", "gpio35"; + function = "qup00"; }; - qup_i2c1_default: qup-i2c1-default { - pinmux { - pins = "gpio0", "gpio1"; - function = "qup01"; - }; + qup_i2c1_default: qup-i2c1-default-state { + pins = "gpio0", "gpio1"; + function = "qup01"; }; - qup_i2c2_default: qup-i2c2-default { - pinmux { - pins = "gpio15", "gpio16"; - function = "qup02_i2c"; - }; + qup_i2c2_default: qup-i2c2-default-state { + pins = "gpio15", "gpio16"; + function = "qup02_i2c"; }; - qup_i2c3_default: qup-i2c3-default { - pinmux { - pins = "gpio38", "gpio39"; - function = "qup03"; - }; + qup_i2c3_default: qup-i2c3-default-state { + pins = "gpio38", "gpio39"; + function = "qup03"; }; - qup_i2c4_default: qup-i2c4-default { - pinmux { - pins = "gpio115", "gpio116"; - function = "qup04_i2c"; - }; + qup_i2c4_default: qup-i2c4-default-state { + pins = "gpio115", "gpio116"; + function = "qup04_i2c"; }; - qup_i2c5_default: qup-i2c5-default { - pinmux { - pins = "gpio25", "gpio26"; - function = "qup05"; - }; + qup_i2c5_default: qup-i2c5-default-state { + pins = "gpio25", "gpio26"; + function = "qup05"; }; - qup_i2c6_default: qup-i2c6-default { - pinmux { - pins = "gpio59", "gpio60"; - function = "qup10"; - }; + qup_i2c6_default: qup-i2c6-default-state { + pins = "gpio59", "gpio60"; + function = "qup10"; }; - qup_i2c7_default: qup-i2c7-default { - pinmux { - pins = "gpio6", "gpio7"; - function = "qup11_i2c"; - }; + qup_i2c7_default: qup-i2c7-default-state { + pins = "gpio6", "gpio7"; + function = "qup11_i2c"; }; - qup_i2c8_default: qup-i2c8-default { - pinmux { - pins = "gpio42", "gpio43"; - function = "qup12"; - }; + qup_i2c8_default: qup-i2c8-default-state { + pins = "gpio42", "gpio43"; + function = "qup12"; }; - qup_i2c9_default: qup-i2c9-default { - pinmux { - pins = "gpio46", "gpio47"; - function = "qup13_i2c"; - }; + qup_i2c9_default: qup-i2c9-default-state { + pins = "gpio46", "gpio47"; + function = "qup13_i2c"; }; - qup_i2c10_default: qup-i2c10-default { - pinmux { - pins = "gpio86", "gpio87"; - function = "qup14"; - }; + qup_i2c10_default: qup-i2c10-default-state { + pins = "gpio86", "gpio87"; + function = "qup14"; }; - qup_i2c11_default: qup-i2c11-default { - pinmux { - pins = "gpio53", "gpio54"; - function = "qup15"; - }; + qup_i2c11_default: qup-i2c11-default-state { + pins = "gpio53", "gpio54"; + function = "qup15"; + }; + + qup_spi0_spi: qup-spi0-spi-state { + pins = "gpio34", "gpio35", "gpio36"; + function = "qup00"; + }; + + qup_spi0_cs: qup-spi0-cs-state { + pins = "gpio37"; + function = "qup00"; + }; + + qup_spi0_cs_gpio: qup-spi0-cs-gpio-state { + pins = "gpio37"; + function = "gpio"; + }; + + qup_spi1_spi: qup-spi1-spi-state { + pins = "gpio0", "gpio1", "gpio2"; + function = "qup01"; + }; + + qup_spi1_cs: qup-spi1-cs-state { + pins = "gpio3"; + function = "qup01"; + }; + + qup_spi1_cs_gpio: qup-spi1-cs-gpio-state { + pins = "gpio3"; + function = "gpio"; + }; + + qup_spi3_spi: qup-spi3-spi-state { + pins = "gpio38", "gpio39", "gpio40"; + function = "qup03"; + }; + + qup_spi3_cs: qup-spi3-cs-state { + pins = "gpio41"; + function = "qup03"; }; - qup_spi0_default: qup-spi0-default { - pinmux { - pins = "gpio34", "gpio35", - "gpio36", "gpio37"; + qup_spi3_cs_gpio: qup-spi3-cs-gpio-state { + pins = "gpio41"; + function = "gpio"; + }; + + qup_spi5_spi: qup-spi5-spi-state { + pins = "gpio25", "gpio26", "gpio27"; + function = "qup05"; + }; + + qup_spi5_cs: qup-spi5-cs-state { + pins = "gpio28"; + function = "qup05"; + }; + + qup_spi5_cs_gpio: qup-spi5-cs-gpio-state { + pins = "gpio28"; + function = "gpio"; + }; + + qup_spi6_spi: qup-spi6-spi-state { + pins = "gpio59", "gpio60", "gpio61"; + function = "qup10"; + }; + + qup_spi6_cs: qup-spi6-cs-state { + pins = "gpio62"; + function = "qup10"; + }; + + qup_spi6_cs_gpio: qup-spi6-cs-gpio-state { + pins = "gpio62"; + function = "gpio"; + }; + + qup_spi8_spi: qup-spi8-spi-state { + pins = "gpio42", "gpio43", "gpio44"; + function = "qup12"; + }; + + qup_spi8_cs: qup-spi8-cs-state { + pins = "gpio45"; + function = "qup12"; + }; + + qup_spi8_cs_gpio: qup-spi8-cs-gpio-state { + pins = "gpio45"; + function = "gpio"; + }; + + qup_spi10_spi: qup-spi10-spi-state { + pins = "gpio86", "gpio87", "gpio88"; + function = "qup14"; + }; + + qup_spi10_cs: qup-spi10-cs-state { + pins = "gpio89"; + function = "qup14"; + }; + + qup_spi10_cs_gpio: qup-spi10-cs-gpio-state { + pins = "gpio89"; + function = "gpio"; + }; + + qup_spi11_spi: qup-spi11-spi-state { + pins = "gpio53", "gpio54", "gpio55"; + function = "qup15"; + }; + + qup_spi11_cs: qup-spi11-cs-state { + pins = "gpio56"; + function = "qup15"; + }; + + qup_spi11_cs_gpio: qup-spi11-cs-gpio-state { + pins = "gpio56"; + function = "gpio"; + }; + + qup_uart0_default: qup-uart0-default-state { + qup_uart0_cts: cts-pins { + pins = "gpio34"; function = "qup00"; }; - }; - qup_spi0_cs_gpio: qup-spi0-cs-gpio { - pinmux { - pins = "gpio34", "gpio35", - "gpio36"; + qup_uart0_rts: rts-pins { + pins = "gpio35"; function = "qup00"; }; - pinmux-cs { + qup_uart0_tx: tx-pins { + pins = "gpio36"; + function = "qup00"; + }; + + qup_uart0_rx: rx-pins { pins = "gpio37"; - function = "gpio"; + function = "qup00"; }; }; - qup_spi1_default: qup-spi1-default { - pinmux { - pins = "gpio0", "gpio1", - "gpio2", "gpio3"; + qup_uart1_default: qup-uart1-default-state { + qup_uart1_cts: cts-pins { + pins = "gpio0"; function = "qup01"; }; - }; - qup_spi1_cs_gpio: qup-spi1-cs-gpio { - pinmux { - pins = "gpio0", "gpio1", - "gpio2"; + qup_uart1_rts: rts-pins { + pins = "gpio1"; function = "qup01"; }; - pinmux-cs { - pins = "gpio3"; - function = "gpio"; + qup_uart1_tx: tx-pins { + pins = "gpio2"; + function = "qup01"; }; - }; - qup_spi3_default: qup-spi3-default { - pinmux { - pins = "gpio38", "gpio39", - "gpio40", "gpio41"; - function = "qup03"; + qup_uart1_rx: rx-pins { + pins = "gpio3"; + function = "qup01"; }; }; - qup_spi3_cs_gpio: qup-spi3-cs-gpio { - pinmux { - pins = "gpio38", "gpio39", - "gpio40"; - function = "qup03"; + qup_uart2_default: qup-uart2-default-state { + qup_uart2_tx: tx-pins { + pins = "gpio15"; + function = "qup02_uart"; }; - pinmux-cs { - pins = "gpio41"; - function = "gpio"; + qup_uart2_rx: rx-pins { + pins = "gpio16"; + function = "qup02_uart"; }; }; - qup_spi5_default: qup-spi5-default { - pinmux { - pins = "gpio25", "gpio26", - "gpio27", "gpio28"; - function = "qup05"; + qup_uart3_default: qup-uart3-default-state { + qup_uart3_cts: cts-pins { + pins = "gpio38"; + function = "qup03"; }; - }; - qup_spi5_cs_gpio: qup-spi5-cs-gpio { - pinmux { - pins = "gpio25", "gpio26", - "gpio27"; - function = "qup05"; + qup_uart3_rts: rts-pins { + pins = "gpio39"; + function = "qup03"; }; - pinmux-cs { - pins = "gpio28"; - function = "gpio"; + qup_uart3_tx: tx-pins { + pins = "gpio40"; + function = "qup03"; }; - }; - qup_spi6_default: qup-spi6-default { - pinmux { - pins = "gpio59", "gpio60", - "gpio61", "gpio62"; - function = "qup10"; + qup_uart3_rx: rx-pins { + pins = "gpio41"; + function = "qup03"; }; }; - qup_spi6_cs_gpio: qup-spi6-cs-gpio { - pinmux { - pins = "gpio59", "gpio60", - "gpio61"; - function = "qup10"; + qup_uart4_default: qup-uart4-default-state { + qup_uart4_tx: tx-pins { + pins = "gpio115"; + function = "qup04_uart"; }; - pinmux-cs { - pins = "gpio62"; - function = "gpio"; + qup_uart4_rx: rx-pins { + pins = "gpio116"; + function = "qup04_uart"; }; }; - qup_spi8_default: qup-spi8-default { - pinmux { - pins = "gpio42", "gpio43", - "gpio44", "gpio45"; - function = "qup12"; + qup_uart5_default: qup-uart5-default-state { + qup_uart5_cts: cts-pins { + pins = "gpio25"; + function = "qup05"; }; - }; - qup_spi8_cs_gpio: qup-spi8-cs-gpio { - pinmux { - pins = "gpio42", "gpio43", - "gpio44"; - function = "qup12"; + qup_uart5_rts: rts-pins { + pins = "gpio26"; + function = "qup05"; }; - pinmux-cs { - pins = "gpio45"; - function = "gpio"; + qup_uart5_tx: tx-pins { + pins = "gpio27"; + function = "qup05"; }; - }; - qup_spi10_default: qup-spi10-default { - pinmux { - pins = "gpio86", "gpio87", - "gpio88", "gpio89"; - function = "qup14"; + qup_uart5_rx: rx-pins { + pins = "gpio28"; + function = "qup05"; }; }; - qup_spi10_cs_gpio: qup-spi10-cs-gpio { - pinmux { - pins = "gpio86", "gpio87", - "gpio88"; - function = "qup14"; + qup_uart6_default: qup-uart6-default-state { + qup_uart6_cts: cts-pins { + pins = "gpio59"; + function = "qup10"; }; - pinmux-cs { - pins = "gpio89"; - function = "gpio"; + qup_uart6_rts: rts-pins { + pins = "gpio60"; + function = "qup10"; }; - }; - qup_spi11_default: qup-spi11-default { - pinmux { - pins = "gpio53", "gpio54", - "gpio55", "gpio56"; - function = "qup15"; + qup_uart6_tx: tx-pins { + pins = "gpio61"; + function = "qup10"; + }; + + qup_uart6_rx: rx-pins { + pins = "gpio62"; + function = "qup10"; }; }; - qup_spi11_cs_gpio: qup-spi11-cs-gpio { - pinmux { - pins = "gpio53", "gpio54", - "gpio55"; - function = "qup15"; + qup_uart7_default: qup-uart7-default-state { + qup_uart7_tx: tx-pins { + pins = "gpio6"; + function = "qup11_uart"; }; - pinmux-cs { - pins = "gpio56"; - function = "gpio"; + qup_uart7_rx: rx-pins { + pins = "gpio7"; + function = "qup11_uart"; }; }; - qup_uart0_default: qup-uart0-default { - pinmux { - pins = "gpio34", "gpio35", - "gpio36", "gpio37"; - function = "qup00"; + qup_uart8_default: qup-uart8-default-state { + qup_uart8_tx: tx-pins { + pins = "gpio44"; + function = "qup12"; }; - }; - qup_uart1_default: qup-uart1-default { - pinmux { - pins = "gpio0", "gpio1", - "gpio2", "gpio3"; - function = "qup01"; + qup_uart8_rx: rx-pins { + pins = "gpio45"; + function = "qup12"; }; }; - qup_uart2_default: qup-uart2-default { - pinmux { - pins = "gpio15", "gpio16"; - function = "qup02_uart"; + qup_uart9_default: qup-uart9-default-state { + qup_uart9_tx: tx-pins { + pins = "gpio46"; + function = "qup13_uart"; }; - }; - qup_uart3_default: qup-uart3-default { - pinmux { - pins = "gpio38", "gpio39", - "gpio40", "gpio41"; - function = "qup03"; + qup_uart9_rx: rx-pins { + pins = "gpio47"; + function = "qup13_uart"; }; }; - qup_uart4_default: qup-uart4-default { - pinmux { - pins = "gpio115", "gpio116"; - function = "qup04_uart"; + qup_uart10_default: qup-uart10-default-state { + qup_uart10_cts: cts-pins { + pins = "gpio86"; + function = "qup14"; }; - }; - qup_uart5_default: qup-uart5-default { - pinmux { - pins = "gpio25", "gpio26", - "gpio27", "gpio28"; - function = "qup05"; + qup_uart10_rts: rts-pins { + pins = "gpio87"; + function = "qup14"; }; - }; - qup_uart6_default: qup-uart6-default { - pinmux { - pins = "gpio59", "gpio60", - "gpio61", "gpio62"; - function = "qup10"; + qup_uart10_tx: tx-pins { + pins = "gpio88"; + function = "qup14"; }; - }; - qup_uart7_default: qup-uart7-default { - pinmux { - pins = "gpio6", "gpio7"; - function = "qup11_uart"; + qup_uart10_rx: rx-pins { + pins = "gpio89"; + function = "qup14"; }; }; - qup_uart8_default: qup-uart8-default { - pinmux { - pins = "gpio44", "gpio45"; - function = "qup12"; + qup_uart11_default: qup-uart11-default-state { + qup_uart11_cts: cts-pins { + pins = "gpio53"; + function = "qup15"; }; - }; - qup_uart9_default: qup-uart9-default { - pinmux { - pins = "gpio46", "gpio47"; - function = "qup13_uart"; + qup_uart11_rts: rts-pins { + pins = "gpio54"; + function = "qup15"; }; - }; - qup_uart10_default: qup-uart10-default { - pinmux { - pins = "gpio86", "gpio87", - "gpio88", "gpio89"; - function = "qup14"; + qup_uart11_tx: tx-pins { + pins = "gpio55"; + function = "qup15"; }; - }; - qup_uart11_default: qup-uart11-default { - pinmux { - pins = "gpio53", "gpio54", - "gpio55", "gpio56"; + qup_uart11_rx: rx-pins { + pins = "gpio56"; function = "qup15"; }; }; - sec_mi2s_active: sec-mi2s-active { - pinmux { - pins = "gpio49", "gpio50", "gpio51"; - function = "mi2s_1"; - }; + sec_mi2s_active: sec-mi2s-active-state { + pins = "gpio49", "gpio50", "gpio51"; + function = "mi2s_1"; }; - pri_mi2s_active: pri-mi2s-active { - pinmux { - pins = "gpio53", "gpio54", "gpio55", "gpio56"; - function = "mi2s_0"; - }; + pri_mi2s_active: pri-mi2s-active-state { + pins = "gpio53", "gpio54", "gpio55", "gpio56"; + function = "mi2s_0"; }; - pri_mi2s_mclk_active: pri-mi2s-mclk-active { - pinmux { - pins = "gpio57"; - function = "lpass_ext"; - }; + pri_mi2s_mclk_active: pri-mi2s-mclk-active-state { + pins = "gpio57"; + function = "lpass_ext"; }; }; @@ -2775,6 +2809,7 @@ "dm_hs_phy_irq", "dp_hs_phy_irq"; power-domains = <&gcc USB30_PRIM_GDSC>; + required-opps = <&rpmhpd_opp_nom>; resets = <&gcc GCC_USB30_PRIM_BCR>; @@ -2782,6 +2817,8 @@ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3 0>; interconnect-names = "usb-ddr", "apps-usb"; + wakeup-source; + usb_1_dwc3: usb@a600000 { compatible = "snps,dwc3"; reg = <0 0x0a600000 0 0xe000>; @@ -3012,7 +3049,6 @@ power-domains = <&rpmhpd SC7180_CX>; phys = <&dsi_phy>; - phy-names = "dsi"; #address-cells = <1>; #size-cells = <0>; @@ -3057,7 +3093,7 @@ }; }; - dsi_phy: dsi-phy@ae94400 { + dsi_phy: phy@ae94400 { compatible = "qcom,dsi-phy-10nm"; reg = <0 0x0ae94400 0 0x200>, <0 0x0ae94600 0 0x280>, diff --git a/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi b/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi index 25f31c81b2b7..16fb20369c01 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi @@ -39,20 +39,10 @@ no-map; }; - mpss_mem: memory@8b800000 { - reg = <0x0 0x8b800000 0x0 0xf600000>; - no-map; - }; - wpss_mem: memory@9ae00000 { reg = <0x0 0x9ae00000 0x0 0x1900000>; no-map; }; - - mba_mem: memory@9c700000 { - reg = <0x0 0x9c700000 0x0 0x200000>; - no-map; - }; }; }; @@ -88,11 +78,6 @@ firmware-name = "ath11k/WCN6750/hw1.0/wpss.mdt"; }; -/* Increase the size from 2.5MB to 8MB */ -&rmtfs_mem { - reg = <0x0 0x9c900000 0x0 0x800000>; -}; - &wifi { status = "okay"; diff --git a/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts b/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts index dddb505e220b..1185141f348e 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts +++ b/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts @@ -118,25 +118,25 @@ ap_ts_pen_1v8: &i2c13 { }; &tlmm { - tp_int_odl: tp-int-odl { + tp_int_odl: tp-int-odl-state { pins = "gpio7"; function = "gpio"; bias-disable; }; - ts_int_l: ts-int-l { + ts_int_l: ts-int-l-state { pins = "gpio55"; function = "gpio"; bias-pull-up; }; - ts_reset_l: ts-reset-l { + ts_reset_l: ts-reset-l-state { pins = "gpio54"; function = "gpio"; bias-disable; }; - us_euro_hs_sel: us-euro-hs-sel { + us_euro_hs_sel: us-euro-hs-sel-state { pins = "gpio81"; function = "gpio"; bias-pull-down; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682-3mic.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682-3mic.dtsi new file mode 100644 index 000000000000..cf34334451d6 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682-3mic.dtsi @@ -0,0 +1,195 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * + * This file defines the common audio settings for the child boards + * using rt5682 codec and having 3 dmics connected to sc7280. + * + * Copyright 2022 Google LLC. + */ + +/ { + /* BOARD-SPECIFIC TOP LEVEL NODES */ + sound: sound { + compatible = "google,sc7280-herobrine"; + model = "sc7280-rt5682-max98360a-3mic"; + + audio-routing = "VA DMIC0", "vdd-micb", + "VA DMIC1", "vdd-micb", + "VA DMIC2", "vdd-micb", + "VA DMIC3", "vdd-micb", + + "Headphone Jack", "HPOL", + "Headphone Jack", "HPOR"; + + #address-cells = <1>; + #size-cells = <0>; + + dai-link@0 { + link-name = "MAX98360"; + reg = <0>; + + cpu { + sound-dai = <&lpass_cpu MI2S_SECONDARY>; + }; + + codec { + sound-dai = <&max98360a>; + }; + }; + + dai-link@1 { + link-name = "DisplayPort"; + reg = <1>; + + cpu { + sound-dai = <&lpass_cpu LPASS_DP_RX>; + }; + + codec { + sound-dai = <&mdss_dp>; + }; + }; + + dai-link@2 { + link-name = "ALC5682"; + reg = <2>; + + cpu { + sound-dai = <&lpass_cpu MI2S_PRIMARY>; + }; + + codec { + sound-dai = <&alc5682 0 /* aif1 */>; + }; + }; + + dai-link@4 { + link-name = "DMIC"; + reg = <4>; + + cpu { + sound-dai = <&lpass_cpu LPASS_CDC_DMA_VA_TX0>; + }; + + codec { + sound-dai = <&lpass_va_macro 0>; + }; + }; + }; +}; + +hp_i2c: &i2c2 { + clock-frequency = <400000>; + status = "okay"; + + alc5682: codec@1a { + compatible = "realtek,rt5682s"; + reg = <0x1a>; + pinctrl-names = "default"; + pinctrl-0 = <&hp_irq>; + + #sound-dai-cells = <1>; + + interrupt-parent = <&tlmm>; + interrupts = <101 IRQ_TYPE_EDGE_BOTH>; + + AVDD-supply = <&pp1800_alc5682>; + MICVDD-supply = <&pp3300_codec>; + + realtek,dmic1-data-pin = <1>; + realtek,dmic1-clk-pin = <2>; + realtek,jd-src = <1>; + realtek,dmic-clk-rate-hz = <2048000>; + }; +}; + +&lpass_cpu { + pinctrl-names = "default"; + pinctrl-0 = <&mi2s0_data0>, <&mi2s0_data1>, <&mi2s0_mclk>, <&mi2s0_sclk>, <&mi2s0_ws>, + <&mi2s1_data0>, <&mi2s1_sclk>, <&mi2s1_ws>; + + #address-cells = <1>; + #size-cells = <0>; + + status = "okay"; + + dai-link@0 { + reg = <MI2S_PRIMARY>; + qcom,playback-sd-lines = <1>; + qcom,capture-sd-lines = <0>; + }; + + dai-link@1 { + reg = <MI2S_SECONDARY>; + qcom,playback-sd-lines = <0>; + }; + + dai-link@5 { + reg = <LPASS_DP_RX>; + }; + + dai-link@25 { + reg = <LPASS_CDC_DMA_VA_TX0>; + }; +}; + +&lpass_va_macro { + vdd-micb-supply = <&pp1800_l2c>; + pinctrl-0 = <&lpass_dmic01_clk>, <&lpass_dmic01_data>, <&lpass_dmic23_clk>, + <&lpass_dmic23_data>; + + status = "okay"; +}; + +/* PINCTRL - ADDITIONS TO NODES IN PARENT DEVICE TREE FILES */ + +&lpass_dmic01_clk { + drive-strength = <8>; + bias-disable; +}; + +&lpass_dmic01_clk_sleep { + drive-strength = <2>; +}; + +&lpass_dmic01_data { + bias-pull-down; +}; + +&lpass_dmic23_clk { + drive-strength = <8>; + bias-disable; +}; + +&lpass_dmic23_clk_sleep { + drive-strength = <2>; +}; + +&lpass_dmic23_data { + bias-pull-down; +}; + +&mi2s0_data0 { + drive-strength = <6>; + bias-disable; +}; + +&mi2s0_data1 { + drive-strength = <6>; + bias-disable; +}; + +&mi2s0_mclk { + drive-strength = <6>; + bias-disable; +}; + +&mi2s0_sclk { + drive-strength = <6>; + bias-disable; +}; + +&mi2s0_ws { + drive-strength = <6>; + bias-disable; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682.dtsi new file mode 100644 index 000000000000..af685bc35e10 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682.dtsi @@ -0,0 +1,122 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * + * This file defines the common audio settings for the child boards + * using rt5682 codec. + * + * Copyright 2022 Google LLC. + */ + +/ { + /* BOARD-SPECIFIC TOP LEVEL NODES */ + sound: sound { + compatible = "google,sc7280-herobrine"; + model = "sc7280-rt5682-max98360a-1mic"; + + audio-routing = "Headphone Jack", "HPOL", + "Headphone Jack", "HPOR"; + + #address-cells = <1>; + #size-cells = <0>; + + dai-link@0 { + link-name = "MAX98360"; + reg = <0>; + + cpu { + sound-dai = <&lpass_cpu MI2S_SECONDARY>; + }; + + codec { + sound-dai = <&max98360a>; + }; + }; + + dai-link@1 { + link-name = "ALC5682"; + reg = <1>; + + cpu { + sound-dai = <&lpass_cpu MI2S_PRIMARY>; + }; + + codec { + sound-dai = <&alc5682 0 /* aif1 */>; + }; + }; + }; +}; + +hp_i2c: &i2c2 { + clock-frequency = <400000>; + status = "okay"; + + alc5682: codec@1a { + compatible = "realtek,rt5682s"; + reg = <0x1a>; + pinctrl-names = "default"; + pinctrl-0 = <&hp_irq>; + + #sound-dai-cells = <1>; + + interrupt-parent = <&tlmm>; + interrupts = <101 IRQ_TYPE_EDGE_BOTH>; + + AVDD-supply = <&pp1800_alc5682>; + MICVDD-supply = <&pp3300_codec>; + + realtek,dmic1-data-pin = <1>; + realtek,dmic1-clk-pin = <2>; + realtek,jd-src = <1>; + realtek,dmic-clk-rate-hz = <2048000>; + }; +}; + +&lpass_cpu { + pinctrl-names = "default"; + pinctrl-0 = <&mi2s0_data0>, <&mi2s0_data1>, <&mi2s0_mclk>, <&mi2s0_sclk>, <&mi2s0_ws>, + <&mi2s1_data0>, <&mi2s1_sclk>, <&mi2s1_ws>; + + #address-cells = <1>; + #size-cells = <0>; + + status = "okay"; + + dai-link@0 { + reg = <MI2S_PRIMARY>; + qcom,playback-sd-lines = <1>; + qcom,capture-sd-lines = <0>; + }; + + dai-link@1 { + reg = <MI2S_SECONDARY>; + qcom,playback-sd-lines = <0>; + }; +}; + +/* PINCTRL - ADDITIONS TO NODES IN PARENT DEVICE TREE FILES */ + +&mi2s0_data0 { + drive-strength = <6>; + bias-disable; +}; + +&mi2s0_data1 { + drive-strength = <6>; + bias-disable; +}; + +&mi2s0_mclk { + drive-strength = <6>; + bias-disable; +}; + +&mi2s0_sclk { + drive-strength = <6>; + bias-disable; +}; + +&mi2s0_ws { + drive-strength = <6>; + bias-disable; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts index f0f26af1e421..4e0b013e25f4 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts @@ -372,5 +372,6 @@ ap_ts_pen_1v8: &i2c13 { "", /* 170 */ "MOS_BLE_UART_TX", "MOS_BLE_UART_RX", + "", ""; }; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker-lte.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker-lte.dts new file mode 100644 index 000000000000..14f20e705869 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker-lte.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Evoker board device tree source + * + * Copyright 2022 Google LLC. + */ + +/dts-v1/; + +#include "sc7280-herobrine-evoker.dtsi" +#include "sc7280-herobrine-lte-sku.dtsi" + +/ { + model = "Google Evoker with LTE"; + compatible = "google,evoker-sku512", "qcom,sc7280"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker.dts new file mode 100644 index 000000000000..4f781fe25c9c --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Evoker board device tree source + * + * Copyright 2022 Google LLC. + */ + +/dts-v1/; + +#include "sc7280-herobrine-evoker.dtsi" +#include "sc7280-herobrine-wifi-sku.dtsi" + +/ { + model = "Google Evoker"; + compatible = "google,evoker", "qcom,sc7280"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker-r0.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker.dtsi index ccbe50b6249a..3d639c70a06e 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker-r0.dts +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker.dtsi @@ -5,14 +5,8 @@ * Copyright 2022 Google LLC. */ -/dts-v1/; - #include "sc7280-herobrine.dtsi" - -/ { - model = "Google Evoker"; - compatible = "google,evoker", "qcom,sc7280"; -}; +#include "sc7280-herobrine-audio-rt5682-3mic.dtsi" /* * ADDITIONS TO FIXED REGULATORS DEFINED IN PARENT DEVICE TREE FILES @@ -30,16 +24,15 @@ ap_tp_i2c: &i2c0 { status = "okay"; clock-frequency = <400000>; - trackpad: trackpad@2c { - compatible = "hid-over-i2c"; - reg = <0x2c>; + trackpad: trackpad@15 { + compatible = "elan,ekth3000"; + reg = <0x15>; pinctrl-names = "default"; pinctrl-0 = <&tp_int_odl>; interrupt-parent = <&tlmm>; interrupts = <7 IRQ_TYPE_EDGE_FALLING>; - hid-descr-addr = <0x20>; vcc-supply = <&pp3300_z1>; wakeup-source; @@ -50,9 +43,9 @@ ts_i2c: &i2c13 { status = "okay"; clock-frequency = <400000>; - ap_ts: touchscreen@10 { - compatible = "elan,ekth6915"; - reg = <0x10>; + ap_ts: touchscreen@5d { + compatible = "goodix,gt7986u", "goodix,gt7375p"; + reg = <0x5d>; pinctrl-names = "default"; pinctrl-0 = <&ts_int_conn>, <&ts_rst_conn>; @@ -61,7 +54,7 @@ ts_i2c: &i2c13 { reset-gpios = <&tlmm 54 GPIO_ACTIVE_LOW>; - vcc33-supply = <&ts_avdd>; + vdd-supply = <&ts_avdd>; }; }; @@ -328,6 +321,5 @@ ts_i2c: &i2c13 { "MOS_BLE_UART_TX", "MOS_BLE_UART_RX", "", - "", ""; }; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts index c1a671968725..b04888a98203 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts @@ -8,6 +8,7 @@ /dts-v1/; #include "sc7280-herobrine.dtsi" +#include "sc7280-herobrine-audio-rt5682.dtsi" #include "sc7280-herobrine-lte-sku.dtsi" / { @@ -47,10 +48,6 @@ /* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */ -&ap_spi_fp { - status = "okay"; -}; - /* * Although the trackpad is really part of the herobrine baseboard, we'll * put the actual definition in the board device tree since different boards @@ -358,6 +355,5 @@ ts_i2c: &i2c13 { "MOS_BLE_UART_TX", "MOS_BLE_UART_RX", "", - "", ""; }; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi index a92eeccd2b2a..ad66e5e9db4e 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi @@ -6,6 +6,20 @@ */ /* Modem setup is different on Chrome setups than typical Qualcomm setup */ +/ { + reserved-memory { + mpss_mem: memory@8b800000 { + reg = <0x0 0x8b800000 0x0 0xf600000>; + no-map; + }; + + mba_mem: memory@9c700000 { + reg = <0x0 0x9c700000 0x0 0x200000>; + no-map; + }; + }; +}; + &remoteproc_mpss { compatible = "qcom,sc7280-mss-pil"; iommus = <&apps_smmu 0x124 0x0>, <&apps_smmu 0x488 0x7>; @@ -15,3 +29,8 @@ "qcom/sc7280-herobrine/modem/qdsp6sw.mbn"; status = "okay"; }; + +/* Increase the size from 2.5MB to 8MB */ +&rmtfs_mem { + reg = <0x0 0x9c900000 0x0 0x800000>; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1-lte.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1-lte.dts index f1017809e5da..d71cc4bbc4b3 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1-lte.dts +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1-lte.dts @@ -5,7 +5,9 @@ * Copyright 2022 Google LLC. */ -#include "sc7280-herobrine-villager-r1.dts" +/dts-v1/; + +#include "sc7280-herobrine-villager-r1.dtsi" #include "sc7280-herobrine-lte-sku.dtsi" / { diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1.dts index cfc648726930..edb52f12f0ea 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1.dts +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1.dts @@ -7,37 +7,10 @@ /dts-v1/; -#include "sc7280-herobrine-villager.dtsi" -#include "sc7280-herobrine-audio-wcd9385.dtsi" +#include "sc7280-herobrine-villager-r1.dtsi" +#include "sc7280-herobrine-wifi-sku.dtsi" / { model = "Google Villager (rev1+)"; compatible = "google,villager", "qcom,sc7280"; }; - -&lpass_va_macro { - vdd-micb-supply = <&pp1800_l2c>; -}; - -&sound { - audio-routing = - "IN1_HPHL", "HPHL_OUT", - "IN2_HPHR", "HPHR_OUT", - "AMIC1", "MIC BIAS1", - "AMIC2", "MIC BIAS2", - "VA DMIC0", "vdd-micb", - "VA DMIC1", "vdd-micb", - "VA DMIC2", "vdd-micb", - "VA DMIC3", "vdd-micb", - "TX SWR_ADC0", "ADC1_OUTPUT", - "TX SWR_ADC1", "ADC2_OUTPUT", - "TX SWR_ADC2", "ADC3_OUTPUT", - "TX SWR_DMIC0", "DMIC1_OUTPUT", - "TX SWR_DMIC1", "DMIC2_OUTPUT", - "TX SWR_DMIC2", "DMIC3_OUTPUT", - "TX SWR_DMIC3", "DMIC4_OUTPUT", - "TX SWR_DMIC4", "DMIC5_OUTPUT", - "TX SWR_DMIC5", "DMIC6_OUTPUT", - "TX SWR_DMIC6", "DMIC7_OUTPUT", - "TX SWR_DMIC7", "DMIC8_OUTPUT"; -}; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1.dtsi new file mode 100644 index 000000000000..b25df5a99161 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1.dtsi @@ -0,0 +1,37 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Villager board device tree source + * + * Copyright 2022 Google LLC. + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +#include "sc7280-herobrine-villager.dtsi" +#include "sc7280-herobrine-audio-wcd9385.dtsi" + +&lpass_va_macro { + vdd-micb-supply = <&pp1800_l2c>; +}; + +&sound { + audio-routing = + "IN1_HPHL", "HPHL_OUT", + "IN2_HPHR", "HPHR_OUT", + "AMIC1", "MIC BIAS1", + "AMIC2", "MIC BIAS2", + "VA DMIC0", "vdd-micb", + "VA DMIC1", "vdd-micb", + "VA DMIC2", "vdd-micb", + "VA DMIC3", "vdd-micb", + "TX SWR_ADC0", "ADC1_OUTPUT", + "TX SWR_ADC1", "ADC2_OUTPUT", + "TX SWR_ADC2", "ADC3_OUTPUT", + "TX SWR_DMIC0", "DMIC1_OUTPUT", + "TX SWR_DMIC1", "DMIC2_OUTPUT", + "TX SWR_DMIC2", "DMIC3_OUTPUT", + "TX SWR_DMIC3", "DMIC4_OUTPUT", + "TX SWR_DMIC4", "DMIC5_OUTPUT", + "TX SWR_DMIC5", "DMIC6_OUTPUT", + "TX SWR_DMIC6", "DMIC7_OUTPUT", + "TX SWR_DMIC7", "DMIC8_OUTPUT"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager.dtsi index 4566722bf4dd..17553e0fd6fd 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager.dtsi @@ -78,16 +78,6 @@ ts_i2c: &i2c13 { status = "okay"; }; -/* For nvme */ -&pcie1 { - status = "okay"; -}; - -/* For nvme */ -&pcie1_phy { - status = "okay"; -}; - &pwmleds { status = "okay"; }; @@ -321,6 +311,5 @@ ts_i2c: &i2c13 { "MOS_BLE_UART_TX", "MOS_BLE_UART_RX", "", - "", ""; }; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-wifi-sku.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-wifi-sku.dtsi new file mode 100644 index 000000000000..2febd6126d4c --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-wifi-sku.dtsi @@ -0,0 +1,11 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Google Herobrine dts fragment for WIFI SKUs + * + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +/* WIFI SKUs save 256M by not having modem/mba/rmtfs memory regions defined. */ + +/delete-node/ &remoteproc_mpss; +/delete-node/ &rmtfs_mem; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi index c11e37160f34..448da9794722 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi @@ -503,13 +503,16 @@ ap_spi_fp: &spi9 { cs-gpios = <&tlmm 39 GPIO_ACTIVE_LOW>; cros_ec_fp: ec@0 { - compatible = "google,cros-ec-spi"; + compatible = "google,cros-ec-fp", "google,cros-ec-spi"; reg = <0>; interrupt-parent = <&tlmm>; interrupts = <61 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; pinctrl-0 = <&fp_to_ap_irq_l>, <&fp_rst_l>, <&fpmcu_boot0>; + boot0-gpios = <&tlmm 68 GPIO_ACTIVE_HIGH>; + reset-gpios = <&tlmm 78 GPIO_ACTIVE_LOW>; spi-max-frequency = <3000000>; + vdd-supply = <&pp3300_fp_mcu>; }; }; @@ -627,6 +630,13 @@ ap_ec_spi: &spi10 { &usb_1_hsphy { status = "okay"; + + qcom,hs-rise-fall-time-bp = <0>; + qcom,squelch-detector-bp = <(-2090)>; + qcom,hs-disconnect-bp = <1743>; + qcom,hs-amplitude-bp = <1780>; + qcom,hs-crossover-voltage-microvolt = <(-31000)>; + qcom,hs-output-impedance-micro-ohms = <2600000>; }; &usb_1_qmpphy { @@ -639,6 +649,21 @@ ap_ec_spi: &spi10 { bias-disable; }; +&mi2s1_data0 { + drive-strength = <6>; + bias-disable; +}; + +&mi2s1_sclk { + drive-strength = <6>; + bias-disable; +}; + +&mi2s1_ws { + drive-strength = <6>; + bias-disable; +}; + &pcie1_clkreq_n { bias-pull-up; drive-strength = <2>; @@ -744,27 +769,27 @@ ap_ec_spi: &spi10 { pinctrl-names = "default"; pinctrl-0 = <&bios_flash_wp_od>; - amp_en: amp-en-pins { + amp_en: amp-en-state { pins = "gpio63"; function = "gpio"; bias-disable; drive-strength = <2>; }; - ap_ec_int_l: ap-ec-int-l-pins { + ap_ec_int_l: ap-ec-int-l-state { pins = "gpio18"; function = "gpio"; bias-pull-up; }; - bios_flash_wp_od: bios-flash-wp-od-pins { + bios_flash_wp_od: bios-flash-wp-od-state { pins = "gpio16"; function = "gpio"; /* Has external pull */ bias-disable; }; - en_fp_rails: en-fp-rails-pins { + en_fp_rails: en-fp-rails-state { pins = "gpio77"; function = "gpio"; bias-disable; @@ -772,60 +797,60 @@ ap_ec_spi: &spi10 { output-high; }; - en_pp3300_codec: en-pp3300-codec-pins { + en_pp3300_codec: en-pp3300-codec-state { pins = "gpio105"; function = "gpio"; bias-disable; drive-strength = <2>; }; - en_pp3300_dx_edp: en-pp3300-dx-edp-pins { + en_pp3300_dx_edp: en-pp3300-dx-edp-state { pins = "gpio80"; function = "gpio"; bias-disable; drive-strength = <2>; }; - fp_rst_l: fp-rst-l-pins { + fp_rst_l: fp-rst-l-state { pins = "gpio78"; function = "gpio"; bias-disable; drive-strength = <2>; }; - fp_to_ap_irq_l: fp-to-ap-irq-l-pins { + fp_to_ap_irq_l: fp-to-ap-irq-l-state { pins = "gpio61"; function = "gpio"; /* Has external pullup */ bias-disable; }; - fpmcu_boot0: fpmcu-boot0-pins { + fpmcu_boot0: fpmcu-boot0-state { pins = "gpio68"; function = "gpio"; bias-disable; }; - gsc_ap_int_odl: gsc-ap-int-odl-pins { + gsc_ap_int_odl: gsc-ap-int-odl-state { pins = "gpio104"; function = "gpio"; bias-pull-up; }; - hp_irq: hp-irq-pins { + hp_irq: hp-irq-state { pins = "gpio101"; function = "gpio"; bias-pull-up; }; - hub_en: hub-en-pins { + hub_en: hub-en-state { pins = "gpio157"; function = "gpio"; bias-disable; drive-strength = <2>; }; - pe_wake_odl: pe-wake-odl-pins { + pe_wake_odl: pe-wake-odl-state { pins = "gpio3"; function = "gpio"; /* Has external pull */ @@ -834,45 +859,45 @@ ap_ec_spi: &spi10 { }; /* For ap_spi_fp */ - qup_spi9_cs_gpio_init_high: qup-spi9-cs-gpio-init-high-pins { + qup_spi9_cs_gpio_init_high: qup-spi9-cs-gpio-init-high-state { pins = "gpio39"; function = "gpio"; output-high; }; /* For ap_ec_spi */ - qup_spi10_cs_gpio_init_high: qup-spi10-cs-gpio-init-high-pins { + qup_spi10_cs_gpio_init_high: qup-spi10-cs-gpio-init-high-state { pins = "gpio43"; function = "gpio"; output-high; }; - sar0_irq_odl: sar0-irq-odl-pins { + sar0_irq_odl: sar0-irq-odl-state { pins = "gpio141"; function = "gpio"; bias-pull-up; }; - sar1_irq_odl: sar1-irq-odl-pins { + sar1_irq_odl: sar1-irq-odl-state { pins = "gpio140"; function = "gpio"; bias-pull-up; }; - sd_cd_odl: sd-cd-odl-pins { + sd_cd_odl: sd-cd-odl-state { pins = "gpio91"; function = "gpio"; bias-pull-up; }; - ssd_en: ssd-en-pins { + ssd_en: ssd-en-state { pins = "gpio51"; function = "gpio"; bias-disable; drive-strength = <2>; }; - ssd_rst_l: ssd-rst-l-pins { + ssd_rst_l: ssd-rst-l-state { pins = "gpio2"; function = "gpio"; bias-disable; @@ -880,14 +905,14 @@ ap_ec_spi: &spi10 { output-low; }; - tp_int_odl: tp-int-odl-pins { + tp_int_odl: tp-int-odl-state { pins = "gpio7"; function = "gpio"; /* Has external pullup */ bias-disable; }; - wf_cam_en: wf-cam-en-pins { + wf_cam_en: wf-cam-en-state { pins = "gpio119"; function = "gpio"; /* Has external pulldown */ diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp-ec-h1.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp-ec-h1.dtsi index 7f5143e9bb80..3cfeb118d379 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-idp-ec-h1.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-idp-ec-h1.dtsi @@ -79,27 +79,29 @@ ap_h1_spi: &spi14 { }; &tlmm { - ap_ec_int_l: ap-ec-int-l-pins { + ap_ec_int_l: ap-ec-int-l-state { pins = "gpio18"; function = "gpio"; input-enable; bias-pull-up; }; - h1_ap_int_odl: h1-ap-int-odl-pins { + h1_ap_int_odl: h1-ap-int-odl-state { pins = "gpio104"; function = "gpio"; input-enable; bias-pull-up; }; - qup_spi10_cs_gpio_init_high: qup-spi10-cs-gpio-init-high-pins { + qup_spi10_cs_gpio_init_high: qup-spi10-cs-gpio-init-high-state { pins = "gpio43"; + function = "gpio"; output-high; }; - qup_spi14_cs_gpio_init_high: qup-spi14-cs-gpio-init-high-pins { + qup_spi14_cs_gpio_init_high: qup-spi14-cs-gpio-init-high-state { pins = "gpio59"; + function = "gpio"; output-high; }; }; diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dts b/arch/arm64/boot/dts/qcom/sc7280-idp.dts index 7559164cdda0..ba64316b4427 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dts +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dts @@ -10,7 +10,6 @@ #include <dt-bindings/iio/qcom,spmi-adc7-pmr735a.h> #include "sc7280-idp.dtsi" #include "pmr735a.dtsi" -#include "sc7280-herobrine-lte-sku.dtsi" / { model = "Qualcomm Technologies, Inc. sc7280 IDP SKU1 platform"; @@ -61,11 +60,6 @@ vddio-supply = <&vreg_l19b_1p8>; }; -&ipa { - status = "okay"; - modem-init; -}; - &pmk8350_rtc { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi index cd432a2856a7..8ca228111681 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi @@ -13,6 +13,7 @@ #include "pmk8350.dtsi" #include "sc7280-chrome-common.dtsi" +#include "sc7280-herobrine-lte-sku.dtsi" / { aliases { @@ -34,7 +35,7 @@ pinctrl-0 = <&wcd_reset_n>; pinctrl-1 = <&wcd_reset_n_sleep>; - reset-gpios = <&tlmm 83 GPIO_ACTIVE_HIGH>; + reset-gpios = <&tlmm 83 GPIO_ACTIVE_LOW>; qcom,rx-device = <&wcd_rx>; qcom,tx-device = <&wcd_tx>; @@ -522,6 +523,12 @@ vdda-pll-supply = <&vreg_l10c_0p8>; vdda33-supply = <&vreg_l2b_3p0>; vdda18-supply = <&vreg_l1c_1p8>; + qcom,hs-rise-fall-time-bp = <0>; + qcom,squelch-detector-bp = <(-2090)>; + qcom,hs-disconnect-bp = <1743>; + qcom,hs-amplitude-bp = <1780>; + qcom,hs-crossover-voltage-microvolt = <(-31000)>; + qcom,hs-output-impedance-micro-ohms = <2600000>; }; &usb_1_qmpphy { @@ -747,24 +754,24 @@ }; &tlmm { - amp_en: amp-en { + amp_en: amp-en-state { pins = "gpio63"; bias-pull-down; drive-strength = <2>; }; - bt_en: bt-en-pins { + bt_en: bt-en-state { pins = "gpio85"; function = "gpio"; output-low; bias-disable; }; - nvme_pwren: nvme-pwren-pins { + nvme_pwren: nvme-pwren-state { function = "gpio"; }; - pcie1_reset_n: pcie1-reset-n-pins { + pcie1_reset_n: pcie1-reset-n-state { pins = "gpio2"; function = "gpio"; @@ -773,7 +780,7 @@ bias-disable; }; - pcie1_wake_n: pcie1-wake-n-pins { + pcie1_wake_n: pcie1-wake-n-state { pins = "gpio3"; function = "gpio"; @@ -781,7 +788,7 @@ bias-pull-up; }; - qup_uart7_sleep_cts: qup-uart7-sleep-cts-pins { + qup_uart7_sleep_cts: qup-uart7-sleep-cts-state { pins = "gpio28"; function = "gpio"; /* @@ -794,7 +801,7 @@ bias-bus-hold; }; - qup_uart7_sleep_rts: qup-uart7-sleep-rts-pins { + qup_uart7_sleep_rts: qup-uart7-sleep-rts-state { pins = "gpio29"; function = "gpio"; /* @@ -806,7 +813,7 @@ bias-pull-down; }; - qup_uart7_sleep_tx: qup-uart7-sleep-tx-pins { + qup_uart7_sleep_tx: qup-uart7-sleep-tx-state { pins = "gpio30"; function = "gpio"; /* @@ -816,7 +823,7 @@ bias-pull-up; }; - qup_uart7_sleep_rx: qup-uart7-sleep-rx-pins { + qup_uart7_sleep_rx: qup-uart7-sleep-rx-state { pins = "gpio31"; function = "gpio"; /* @@ -827,25 +834,25 @@ bias-pull-up; }; - sd_cd: sd-cd-pins { + sd_cd: sd-cd-state { pins = "gpio91"; function = "gpio"; bias-pull-up; }; - sw_ctrl: sw-ctrl-pins { + sw_ctrl: sw-ctrl-state { pins = "gpio86"; function = "gpio"; bias-pull-down; }; - wcd_reset_n: wcd-reset-n { + wcd_reset_n: wcd-reset-n-state { pins = "gpio83"; function = "gpio"; drive-strength = <8>; }; - wcd_reset_n_sleep: wcd-reset-n-sleep { + wcd_reset_n_sleep: wcd-reset-n-sleep-state { pins = "gpio83"; function = "gpio"; drive-strength = <8>; diff --git a/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi b/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi index 4b8c676b0bb1..df49564ae6dc 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi @@ -37,7 +37,7 @@ pinctrl-0 = <&wcd_reset_n>, <&us_euro_hs_sel>; pinctrl-1 = <&wcd_reset_n_sleep>, <&us_euro_hs_sel>; - reset-gpios = <&tlmm 83 GPIO_ACTIVE_HIGH>; + reset-gpios = <&tlmm 83 GPIO_ACTIVE_LOW>; us-euro-gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>; qcom,rx-device = <&wcd_rx>; @@ -595,7 +595,7 @@ mos_bt_uart: &uart7 { }; &tlmm { - mos_bt_en: mos-bt-en-pins { + mos_bt_en: mos-bt-en-state { pins = "gpio85"; function = "gpio"; drive-strength = <2>; @@ -603,7 +603,7 @@ mos_bt_uart: &uart7 { }; /* For mos_bt_uart */ - qup_uart7_sleep_cts: qup-uart7-sleep-cts-pins { + qup_uart7_sleep_cts: qup-uart7-sleep-cts-state { pins = "gpio28"; function = "gpio"; /* @@ -617,7 +617,7 @@ mos_bt_uart: &uart7 { }; /* For mos_bt_uart */ - qup_uart7_sleep_rts: qup-uart7-sleep-rts-pins { + qup_uart7_sleep_rts: qup-uart7-sleep-rts-state { pins = "gpio29"; function = "gpio"; /* @@ -630,7 +630,7 @@ mos_bt_uart: &uart7 { }; /* For mos_bt_uart */ - qup_uart7_sleep_rx: qup-uart7-sleep-rx-pins { + qup_uart7_sleep_rx: qup-uart7-sleep-rx-state { pins = "gpio31"; function = "gpio"; /* @@ -642,7 +642,7 @@ mos_bt_uart: &uart7 { }; /* For mos_bt_uart */ - qup_uart7_sleep_tx: qup-uart7-sleep-tx-pins { + qup_uart7_sleep_tx: qup-uart7-sleep-tx-state { pins = "gpio30"; function = "gpio"; /* @@ -652,32 +652,32 @@ mos_bt_uart: &uart7 { bias-pull-up; }; - ts_int_conn: ts-int-conn-pins { + ts_int_conn: ts-int-conn-state { pins = "gpio55"; function = "gpio"; bias-pull-up; }; - ts_rst_conn: ts-rst-conn-pins { + ts_rst_conn: ts-rst-conn-state { pins = "gpio54"; function = "gpio"; drive-strength = <2>; }; - us_euro_hs_sel: us-euro-hs-sel { + us_euro_hs_sel: us-euro-hs-sel-state { pins = "gpio81"; function = "gpio"; bias-pull-down; drive-strength = <2>; }; - wcd_reset_n: wcd-reset-n { + wcd_reset_n: wcd-reset-n-state { pins = "gpio83"; function = "gpio"; drive-strength = <8>; }; - wcd_reset_n_sleep: wcd-reset-n-sleep { + wcd_reset_n_sleep: wcd-reset-n-sleep-state { pins = "gpio83"; function = "gpio"; drive-strength = <8>; diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi index 212580316d3e..5a886513940b 100644 --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi @@ -752,6 +752,17 @@ interrupt-controller; #interrupt-cells = <2>; }; + + wlan_smp2p_out: wlan-ap-to-wpss { + qcom,entry-name = "wlan"; + #qcom,smem-state-cells = <1>; + }; + + wlan_smp2p_in: wlan-wpss-to-ap { + qcom,entry-name = "wlan"; + interrupt-controller; + #interrupt-cells = <2>; + }; }; pmu { @@ -920,7 +931,7 @@ gpi_dma0: dma-controller@900000 { #dma-cells = <3>; - compatible = "qcom,sc7280-gpi-dma"; + compatible = "qcom,sc7280-gpi-dma", "qcom,sm6350-gpi-dma"; reg = <0 0x00900000 0 0x60000>; interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>, @@ -967,6 +978,8 @@ <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + power-domains = <&rpmhpd SC7280_CX>; + required-opps = <&rpmhpd_opp_low_svs>; dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>, <&gpi_dma0 1 0 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -1025,6 +1038,8 @@ <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + power-domains = <&rpmhpd SC7280_CX>; + required-opps = <&rpmhpd_opp_low_svs>; dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>, <&gpi_dma0 1 1 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -1083,6 +1098,8 @@ <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + power-domains = <&rpmhpd SC7280_CX>; + required-opps = <&rpmhpd_opp_low_svs>; dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>, <&gpi_dma0 1 2 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -1141,6 +1158,8 @@ <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + power-domains = <&rpmhpd SC7280_CX>; + required-opps = <&rpmhpd_opp_low_svs>; dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>, <&gpi_dma0 1 3 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -1199,6 +1218,8 @@ <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + power-domains = <&rpmhpd SC7280_CX>; + required-opps = <&rpmhpd_opp_low_svs>; dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>, <&gpi_dma0 1 4 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -1257,6 +1278,8 @@ <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + power-domains = <&rpmhpd SC7280_CX>; + required-opps = <&rpmhpd_opp_low_svs>; dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>, <&gpi_dma0 1 5 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -1315,6 +1338,8 @@ <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + power-domains = <&rpmhpd SC7280_CX>; + required-opps = <&rpmhpd_opp_low_svs>; dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>, <&gpi_dma0 1 6 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -1373,6 +1398,8 @@ <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + power-domains = <&rpmhpd SC7280_CX>; + required-opps = <&rpmhpd_opp_low_svs>; dmas = <&gpi_dma0 0 7 QCOM_GPI_I2C>, <&gpi_dma0 1 7 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -1419,7 +1446,7 @@ gpi_dma1: dma-controller@a00000 { #dma-cells = <3>; - compatible = "qcom,sc7280-gpi-dma"; + compatible = "qcom,sc7280-gpi-dma", "qcom,sm6350-gpi-dma"; reg = <0 0x00a00000 0 0x60000>; interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>, @@ -1466,6 +1493,8 @@ <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + power-domains = <&rpmhpd SC7280_CX>; + required-opps = <&rpmhpd_opp_low_svs>; dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>, <&gpi_dma1 1 0 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -1524,6 +1553,8 @@ <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + power-domains = <&rpmhpd SC7280_CX>; + required-opps = <&rpmhpd_opp_low_svs>; dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>, <&gpi_dma1 1 1 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -1582,6 +1613,8 @@ <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + power-domains = <&rpmhpd SC7280_CX>; + required-opps = <&rpmhpd_opp_low_svs>; dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>, <&gpi_dma1 1 2 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -1640,6 +1673,8 @@ <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + power-domains = <&rpmhpd SC7280_CX>; + required-opps = <&rpmhpd_opp_low_svs>; dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>, <&gpi_dma1 1 3 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -1698,6 +1733,8 @@ <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + power-domains = <&rpmhpd SC7280_CX>; + required-opps = <&rpmhpd_opp_low_svs>; dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>, <&gpi_dma1 1 4 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -1756,6 +1793,8 @@ <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + power-domains = <&rpmhpd SC7280_CX>; + required-opps = <&rpmhpd_opp_low_svs>; dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>, <&gpi_dma1 1 5 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -1814,6 +1853,8 @@ <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + power-domains = <&rpmhpd SC7280_CX>; + required-opps = <&rpmhpd_opp_low_svs>; dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>, <&gpi_dma1 1 6 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -1872,6 +1913,8 @@ <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + power-domains = <&rpmhpd SC7280_CX>; + required-opps = <&rpmhpd_opp_low_svs>; dmas = <&gpi_dma1 0 7 QCOM_GPI_I2C>, <&gpi_dma1 1 7 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -2004,6 +2047,8 @@ qcom,rproc = <&remoteproc_wpss>; memory-region = <&wlan_fw_mem>, <&wlan_ce_mem>; status = "disabled"; + qcom,smem-states = <&wlan_smp2p_out 0>; + qcom,smem-state-names = "wlan-smp2p-out"; }; pcie1: pci@1c08000 { @@ -2285,7 +2330,6 @@ qcom,ports-block-pack-mode = /bits/ 8 <0xff 0xff 0xff>; qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff>; qcom,ports-lane-control = /bits/ 8 <0x00 0x01 0x00>; - qcom,port-offset = <1>; #sound-dai-cells = <1>; #address-cells = <2>; @@ -2433,84 +2477,82 @@ #gpio-cells = <2>; gpio-ranges = <&lpass_tlmm 0 0 15>; - #clock-cells = <1>; - - lpass_dmic01_clk: dmic01-clk { + lpass_dmic01_clk: dmic01-clk-state { pins = "gpio6"; function = "dmic1_clk"; }; - lpass_dmic01_clk_sleep: dmic01-clk-sleep { + lpass_dmic01_clk_sleep: dmic01-clk-sleep-state { pins = "gpio6"; function = "dmic1_clk"; }; - lpass_dmic01_data: dmic01-data { + lpass_dmic01_data: dmic01-data-state { pins = "gpio7"; function = "dmic1_data"; }; - lpass_dmic01_data_sleep: dmic01-data-sleep { + lpass_dmic01_data_sleep: dmic01-data-sleep-state { pins = "gpio7"; function = "dmic1_data"; }; - lpass_dmic23_clk: dmic23-clk { + lpass_dmic23_clk: dmic23-clk-state { pins = "gpio8"; function = "dmic2_clk"; }; - lpass_dmic23_clk_sleep: dmic23-clk-sleep { + lpass_dmic23_clk_sleep: dmic23-clk-sleep-state { pins = "gpio8"; function = "dmic2_clk"; }; - lpass_dmic23_data: dmic23-data { + lpass_dmic23_data: dmic23-data-state { pins = "gpio9"; function = "dmic2_data"; }; - lpass_dmic23_data_sleep: dmic23-data-sleep { + lpass_dmic23_data_sleep: dmic23-data-sleep-state { pins = "gpio9"; function = "dmic2_data"; }; - lpass_rx_swr_clk: rx-swr-clk { + lpass_rx_swr_clk: rx-swr-clk-state { pins = "gpio3"; function = "swr_rx_clk"; }; - lpass_rx_swr_clk_sleep: rx-swr-clk-sleep { + lpass_rx_swr_clk_sleep: rx-swr-clk-sleep-state { pins = "gpio3"; function = "swr_rx_clk"; }; - lpass_rx_swr_data: rx-swr-data { + lpass_rx_swr_data: rx-swr-data-state { pins = "gpio4", "gpio5"; function = "swr_rx_data"; }; - lpass_rx_swr_data_sleep: rx-swr-data-sleep { + lpass_rx_swr_data_sleep: rx-swr-data-sleep-state { pins = "gpio4", "gpio5"; function = "swr_rx_data"; }; - lpass_tx_swr_clk: tx-swr-clk { + lpass_tx_swr_clk: tx-swr-clk-state { pins = "gpio0"; function = "swr_tx_clk"; }; - lpass_tx_swr_clk_sleep: tx-swr-clk-sleep { + lpass_tx_swr_clk_sleep: tx-swr-clk-sleep-state { pins = "gpio0"; function = "swr_tx_clk"; }; - lpass_tx_swr_data: tx-swr-data { + lpass_tx_swr_data: tx-swr-data-state { pins = "gpio1", "gpio2", "gpio14"; function = "swr_tx_data"; }; - lpass_tx_swr_data_sleep: tx-swr-data-sleep { + lpass_tx_swr_data_sleep: tx-swr-data-sleep-state { pins = "gpio1", "gpio2", "gpio14"; function = "swr_tx_data"; }; @@ -3923,11 +3965,13 @@ "iface", "bus"; + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; + assigned-clock-parents = <&mdss_dsi_phy 0>, <&mdss_dsi_phy 1>; + operating-points-v2 = <&dsi_opp_table>; power-domains = <&rpmhpd SC7280_CX>; phys = <&mdss_dsi_phy>; - phy-names = "dsi"; #address-cells = <1>; #size-cells = <0>; @@ -4258,791 +4302,791 @@ gpio-ranges = <&tlmm 0 0 175>; wakeup-parent = <&pdc>; - dp_hot_plug_det: dp-hot-plug-det-pins { + dp_hot_plug_det: dp-hot-plug-det-state { pins = "gpio47"; function = "dp_hot"; }; - edp_hot_plug_det: edp-hot-plug-det-pins { + edp_hot_plug_det: edp-hot-plug-det-state { pins = "gpio60"; function = "edp_hot"; }; - mi2s0_data0: mi2s0-data0-pins { + mi2s0_data0: mi2s0-data0-state { pins = "gpio98"; function = "mi2s0_data0"; }; - mi2s0_data1: mi2s0-data1-pins { + mi2s0_data1: mi2s0-data1-state { pins = "gpio99"; function = "mi2s0_data1"; }; - mi2s0_mclk: mi2s0-mclk-pins { + mi2s0_mclk: mi2s0-mclk-state { pins = "gpio96"; function = "pri_mi2s"; }; - mi2s0_sclk: mi2s0-sclk-pins { + mi2s0_sclk: mi2s0-sclk-state { pins = "gpio97"; function = "mi2s0_sck"; }; - mi2s0_ws: mi2s0-ws-pins { + mi2s0_ws: mi2s0-ws-state { pins = "gpio100"; function = "mi2s0_ws"; }; - mi2s1_data0: mi2s1-data0-pins { + mi2s1_data0: mi2s1-data0-state { pins = "gpio107"; function = "mi2s1_data0"; }; - mi2s1_sclk: mi2s1-sclk-pins { + mi2s1_sclk: mi2s1-sclk-state { pins = "gpio106"; function = "mi2s1_sck"; }; - mi2s1_ws: mi2s1-ws-pins { + mi2s1_ws: mi2s1-ws-state { pins = "gpio108"; function = "mi2s1_ws"; }; - pcie1_clkreq_n: pcie1-clkreq-n-pins { + pcie1_clkreq_n: pcie1-clkreq-n-state { pins = "gpio79"; function = "pcie1_clkreqn"; }; - qspi_clk: qspi-clk-pins { + qspi_clk: qspi-clk-state { pins = "gpio14"; function = "qspi_clk"; }; - qspi_cs0: qspi-cs0-pins { + qspi_cs0: qspi-cs0-state { pins = "gpio15"; function = "qspi_cs"; }; - qspi_cs1: qspi-cs1-pins { + qspi_cs1: qspi-cs1-state { pins = "gpio19"; function = "qspi_cs"; }; - qspi_data01: qspi-data01-pins { + qspi_data01: qspi-data01-state { pins = "gpio12", "gpio13"; function = "qspi_data"; }; - qspi_data12: qspi-data12-pins { + qspi_data12: qspi-data12-state { pins = "gpio16", "gpio17"; function = "qspi_data"; }; - qup_i2c0_data_clk: qup-i2c0-data-clk-pins { + qup_i2c0_data_clk: qup-i2c0-data-clk-state { pins = "gpio0", "gpio1"; function = "qup00"; }; - qup_i2c1_data_clk: qup-i2c1-data-clk-pins { + qup_i2c1_data_clk: qup-i2c1-data-clk-state { pins = "gpio4", "gpio5"; function = "qup01"; }; - qup_i2c2_data_clk: qup-i2c2-data-clk-pins { + qup_i2c2_data_clk: qup-i2c2-data-clk-state { pins = "gpio8", "gpio9"; function = "qup02"; }; - qup_i2c3_data_clk: qup-i2c3-data-clk-pins { + qup_i2c3_data_clk: qup-i2c3-data-clk-state { pins = "gpio12", "gpio13"; function = "qup03"; }; - qup_i2c4_data_clk: qup-i2c4-data-clk-pins { + qup_i2c4_data_clk: qup-i2c4-data-clk-state { pins = "gpio16", "gpio17"; function = "qup04"; }; - qup_i2c5_data_clk: qup-i2c5-data-clk-pins { + qup_i2c5_data_clk: qup-i2c5-data-clk-state { pins = "gpio20", "gpio21"; function = "qup05"; }; - qup_i2c6_data_clk: qup-i2c6-data-clk-pins { + qup_i2c6_data_clk: qup-i2c6-data-clk-state { pins = "gpio24", "gpio25"; function = "qup06"; }; - qup_i2c7_data_clk: qup-i2c7-data-clk-pins { + qup_i2c7_data_clk: qup-i2c7-data-clk-state { pins = "gpio28", "gpio29"; function = "qup07"; }; - qup_i2c8_data_clk: qup-i2c8-data-clk-pins { + qup_i2c8_data_clk: qup-i2c8-data-clk-state { pins = "gpio32", "gpio33"; function = "qup10"; }; - qup_i2c9_data_clk: qup-i2c9-data-clk-pins { + qup_i2c9_data_clk: qup-i2c9-data-clk-state { pins = "gpio36", "gpio37"; function = "qup11"; }; - qup_i2c10_data_clk: qup-i2c10-data-clk-pins { + qup_i2c10_data_clk: qup-i2c10-data-clk-state { pins = "gpio40", "gpio41"; function = "qup12"; }; - qup_i2c11_data_clk: qup-i2c11-data-clk-pins { + qup_i2c11_data_clk: qup-i2c11-data-clk-state { pins = "gpio44", "gpio45"; function = "qup13"; }; - qup_i2c12_data_clk: qup-i2c12-data-clk-pins { + qup_i2c12_data_clk: qup-i2c12-data-clk-state { pins = "gpio48", "gpio49"; function = "qup14"; }; - qup_i2c13_data_clk: qup-i2c13-data-clk-pins { + qup_i2c13_data_clk: qup-i2c13-data-clk-state { pins = "gpio52", "gpio53"; function = "qup15"; }; - qup_i2c14_data_clk: qup-i2c14-data-clk-pins { + qup_i2c14_data_clk: qup-i2c14-data-clk-state { pins = "gpio56", "gpio57"; function = "qup16"; }; - qup_i2c15_data_clk: qup-i2c15-data-clk-pins { + qup_i2c15_data_clk: qup-i2c15-data-clk-state { pins = "gpio60", "gpio61"; function = "qup17"; }; - qup_spi0_data_clk: qup-spi0-data-clk-pins { + qup_spi0_data_clk: qup-spi0-data-clk-state { pins = "gpio0", "gpio1", "gpio2"; function = "qup00"; }; - qup_spi0_cs: qup-spi0-cs-pins { + qup_spi0_cs: qup-spi0-cs-state { pins = "gpio3"; function = "qup00"; }; - qup_spi0_cs_gpio: qup-spi0-cs-gpio-pins { + qup_spi0_cs_gpio: qup-spi0-cs-gpio-state { pins = "gpio3"; function = "gpio"; }; - qup_spi1_data_clk: qup-spi1-data-clk-pins { + qup_spi1_data_clk: qup-spi1-data-clk-state { pins = "gpio4", "gpio5", "gpio6"; function = "qup01"; }; - qup_spi1_cs: qup-spi1-cs-pins { + qup_spi1_cs: qup-spi1-cs-state { pins = "gpio7"; function = "qup01"; }; - qup_spi1_cs_gpio: qup-spi1-cs-gpio-pins { + qup_spi1_cs_gpio: qup-spi1-cs-gpio-state { pins = "gpio7"; function = "gpio"; }; - qup_spi2_data_clk: qup-spi2-data-clk-pins { + qup_spi2_data_clk: qup-spi2-data-clk-state { pins = "gpio8", "gpio9", "gpio10"; function = "qup02"; }; - qup_spi2_cs: qup-spi2-cs-pins { + qup_spi2_cs: qup-spi2-cs-state { pins = "gpio11"; function = "qup02"; }; - qup_spi2_cs_gpio: qup-spi2-cs-gpio-pins { + qup_spi2_cs_gpio: qup-spi2-cs-gpio-state { pins = "gpio11"; function = "gpio"; }; - qup_spi3_data_clk: qup-spi3-data-clk-pins { + qup_spi3_data_clk: qup-spi3-data-clk-state { pins = "gpio12", "gpio13", "gpio14"; function = "qup03"; }; - qup_spi3_cs: qup-spi3-cs-pins { + qup_spi3_cs: qup-spi3-cs-state { pins = "gpio15"; function = "qup03"; }; - qup_spi3_cs_gpio: qup-spi3-cs-gpio-pins { + qup_spi3_cs_gpio: qup-spi3-cs-gpio-state { pins = "gpio15"; function = "gpio"; }; - qup_spi4_data_clk: qup-spi4-data-clk-pins { + qup_spi4_data_clk: qup-spi4-data-clk-state { pins = "gpio16", "gpio17", "gpio18"; function = "qup04"; }; - qup_spi4_cs: qup-spi4-cs-pins { + qup_spi4_cs: qup-spi4-cs-state { pins = "gpio19"; function = "qup04"; }; - qup_spi4_cs_gpio: qup-spi4-cs-gpio-pins { + qup_spi4_cs_gpio: qup-spi4-cs-gpio-state { pins = "gpio19"; function = "gpio"; }; - qup_spi5_data_clk: qup-spi5-data-clk-pins { + qup_spi5_data_clk: qup-spi5-data-clk-state { pins = "gpio20", "gpio21", "gpio22"; function = "qup05"; }; - qup_spi5_cs: qup-spi5-cs-pins { + qup_spi5_cs: qup-spi5-cs-state { pins = "gpio23"; function = "qup05"; }; - qup_spi5_cs_gpio: qup-spi5-cs-gpio-pins { + qup_spi5_cs_gpio: qup-spi5-cs-gpio-state { pins = "gpio23"; function = "gpio"; }; - qup_spi6_data_clk: qup-spi6-data-clk-pins { + qup_spi6_data_clk: qup-spi6-data-clk-state { pins = "gpio24", "gpio25", "gpio26"; function = "qup06"; }; - qup_spi6_cs: qup-spi6-cs-pins { + qup_spi6_cs: qup-spi6-cs-state { pins = "gpio27"; function = "qup06"; }; - qup_spi6_cs_gpio: qup-spi6-cs-gpio-pins { + qup_spi6_cs_gpio: qup-spi6-cs-gpio-state { pins = "gpio27"; function = "gpio"; }; - qup_spi7_data_clk: qup-spi7-data-clk-pins { + qup_spi7_data_clk: qup-spi7-data-clk-state { pins = "gpio28", "gpio29", "gpio30"; function = "qup07"; }; - qup_spi7_cs: qup-spi7-cs-pins { + qup_spi7_cs: qup-spi7-cs-state { pins = "gpio31"; function = "qup07"; }; - qup_spi7_cs_gpio: qup-spi7-cs-gpio-pins { + qup_spi7_cs_gpio: qup-spi7-cs-gpio-state { pins = "gpio31"; function = "gpio"; }; - qup_spi8_data_clk: qup-spi8-data-clk-pins { + qup_spi8_data_clk: qup-spi8-data-clk-state { pins = "gpio32", "gpio33", "gpio34"; function = "qup10"; }; - qup_spi8_cs: qup-spi8-cs-pins { + qup_spi8_cs: qup-spi8-cs-state { pins = "gpio35"; function = "qup10"; }; - qup_spi8_cs_gpio: qup-spi8-cs-gpio-pins { + qup_spi8_cs_gpio: qup-spi8-cs-gpio-state { pins = "gpio35"; function = "gpio"; }; - qup_spi9_data_clk: qup-spi9-data-clk-pins { + qup_spi9_data_clk: qup-spi9-data-clk-state { pins = "gpio36", "gpio37", "gpio38"; function = "qup11"; }; - qup_spi9_cs: qup-spi9-cs-pins { + qup_spi9_cs: qup-spi9-cs-state { pins = "gpio39"; function = "qup11"; }; - qup_spi9_cs_gpio: qup-spi9-cs-gpio-pins { + qup_spi9_cs_gpio: qup-spi9-cs-gpio-state { pins = "gpio39"; function = "gpio"; }; - qup_spi10_data_clk: qup-spi10-data-clk-pins { + qup_spi10_data_clk: qup-spi10-data-clk-state { pins = "gpio40", "gpio41", "gpio42"; function = "qup12"; }; - qup_spi10_cs: qup-spi10-cs-pins { + qup_spi10_cs: qup-spi10-cs-state { pins = "gpio43"; function = "qup12"; }; - qup_spi10_cs_gpio: qup-spi10-cs-gpio-pins { + qup_spi10_cs_gpio: qup-spi10-cs-gpio-state { pins = "gpio43"; function = "gpio"; }; - qup_spi11_data_clk: qup-spi11-data-clk-pins { + qup_spi11_data_clk: qup-spi11-data-clk-state { pins = "gpio44", "gpio45", "gpio46"; function = "qup13"; }; - qup_spi11_cs: qup-spi11-cs-pins { + qup_spi11_cs: qup-spi11-cs-state { pins = "gpio47"; function = "qup13"; }; - qup_spi11_cs_gpio: qup-spi11-cs-gpio-pins { + qup_spi11_cs_gpio: qup-spi11-cs-gpio-state { pins = "gpio47"; function = "gpio"; }; - qup_spi12_data_clk: qup-spi12-data-clk-pins { + qup_spi12_data_clk: qup-spi12-data-clk-state { pins = "gpio48", "gpio49", "gpio50"; function = "qup14"; }; - qup_spi12_cs: qup-spi12-cs-pins { + qup_spi12_cs: qup-spi12-cs-state { pins = "gpio51"; function = "qup14"; }; - qup_spi12_cs_gpio: qup-spi12-cs-gpio-pins { + qup_spi12_cs_gpio: qup-spi12-cs-gpio-state { pins = "gpio51"; function = "gpio"; }; - qup_spi13_data_clk: qup-spi13-data-clk-pins { + qup_spi13_data_clk: qup-spi13-data-clk-state { pins = "gpio52", "gpio53", "gpio54"; function = "qup15"; }; - qup_spi13_cs: qup-spi13-cs-pins { + qup_spi13_cs: qup-spi13-cs-state { pins = "gpio55"; function = "qup15"; }; - qup_spi13_cs_gpio: qup-spi13-cs-gpio-pins { + qup_spi13_cs_gpio: qup-spi13-cs-gpio-state { pins = "gpio55"; function = "gpio"; }; - qup_spi14_data_clk: qup-spi14-data-clk-pins { + qup_spi14_data_clk: qup-spi14-data-clk-state { pins = "gpio56", "gpio57", "gpio58"; function = "qup16"; }; - qup_spi14_cs: qup-spi14-cs-pins { + qup_spi14_cs: qup-spi14-cs-state { pins = "gpio59"; function = "qup16"; }; - qup_spi14_cs_gpio: qup-spi14-cs-gpio-pins { + qup_spi14_cs_gpio: qup-spi14-cs-gpio-state { pins = "gpio59"; function = "gpio"; }; - qup_spi15_data_clk: qup-spi15-data-clk-pins { + qup_spi15_data_clk: qup-spi15-data-clk-state { pins = "gpio60", "gpio61", "gpio62"; function = "qup17"; }; - qup_spi15_cs: qup-spi15-cs-pins { + qup_spi15_cs: qup-spi15-cs-state { pins = "gpio63"; function = "qup17"; }; - qup_spi15_cs_gpio: qup-spi15-cs-gpio-pins { + qup_spi15_cs_gpio: qup-spi15-cs-gpio-state { pins = "gpio63"; function = "gpio"; }; - qup_uart0_cts: qup-uart0-cts-pins { + qup_uart0_cts: qup-uart0-cts-state { pins = "gpio0"; function = "qup00"; }; - qup_uart0_rts: qup-uart0-rts-pins { + qup_uart0_rts: qup-uart0-rts-state { pins = "gpio1"; function = "qup00"; }; - qup_uart0_tx: qup-uart0-tx-pins { + qup_uart0_tx: qup-uart0-tx-state { pins = "gpio2"; function = "qup00"; }; - qup_uart0_rx: qup-uart0-rx-pins { + qup_uart0_rx: qup-uart0-rx-state { pins = "gpio3"; function = "qup00"; }; - qup_uart1_cts: qup-uart1-cts-pins { + qup_uart1_cts: qup-uart1-cts-state { pins = "gpio4"; function = "qup01"; }; - qup_uart1_rts: qup-uart1-rts-pins { + qup_uart1_rts: qup-uart1-rts-state { pins = "gpio5"; function = "qup01"; }; - qup_uart1_tx: qup-uart1-tx-pins { + qup_uart1_tx: qup-uart1-tx-state { pins = "gpio6"; function = "qup01"; }; - qup_uart1_rx: qup-uart1-rx-pins { + qup_uart1_rx: qup-uart1-rx-state { pins = "gpio7"; function = "qup01"; }; - qup_uart2_cts: qup-uart2-cts-pins { + qup_uart2_cts: qup-uart2-cts-state { pins = "gpio8"; function = "qup02"; }; - qup_uart2_rts: qup-uart2-rts-pins { + qup_uart2_rts: qup-uart2-rts-state { pins = "gpio9"; function = "qup02"; }; - qup_uart2_tx: qup-uart2-tx-pins { + qup_uart2_tx: qup-uart2-tx-state { pins = "gpio10"; function = "qup02"; }; - qup_uart2_rx: qup-uart2-rx-pins { + qup_uart2_rx: qup-uart2-rx-state { pins = "gpio11"; function = "qup02"; }; - qup_uart3_cts: qup-uart3-cts-pins { + qup_uart3_cts: qup-uart3-cts-state { pins = "gpio12"; function = "qup03"; }; - qup_uart3_rts: qup-uart3-rts-pins { + qup_uart3_rts: qup-uart3-rts-state { pins = "gpio13"; function = "qup03"; }; - qup_uart3_tx: qup-uart3-tx-pins { + qup_uart3_tx: qup-uart3-tx-state { pins = "gpio14"; function = "qup03"; }; - qup_uart3_rx: qup-uart3-rx-pins { + qup_uart3_rx: qup-uart3-rx-state { pins = "gpio15"; function = "qup03"; }; - qup_uart4_cts: qup-uart4-cts-pins { + qup_uart4_cts: qup-uart4-cts-state { pins = "gpio16"; function = "qup04"; }; - qup_uart4_rts: qup-uart4-rts-pins { + qup_uart4_rts: qup-uart4-rts-state { pins = "gpio17"; function = "qup04"; }; - qup_uart4_tx: qup-uart4-tx-pins { + qup_uart4_tx: qup-uart4-tx-state { pins = "gpio18"; function = "qup04"; }; - qup_uart4_rx: qup-uart4-rx-pins { + qup_uart4_rx: qup-uart4-rx-state { pins = "gpio19"; function = "qup04"; }; - qup_uart5_cts: qup-uart5-cts-pins { + qup_uart5_cts: qup-uart5-cts-state { pins = "gpio20"; function = "qup05"; }; - qup_uart5_rts: qup-uart5-rts-pins { + qup_uart5_rts: qup-uart5-rts-state { pins = "gpio21"; function = "qup05"; }; - qup_uart5_tx: qup-uart5-tx-pins { + qup_uart5_tx: qup-uart5-tx-state { pins = "gpio22"; function = "qup05"; }; - qup_uart5_rx: qup-uart5-rx-pins { + qup_uart5_rx: qup-uart5-rx-state { pins = "gpio23"; function = "qup05"; }; - qup_uart6_cts: qup-uart6-cts-pins { + qup_uart6_cts: qup-uart6-cts-state { pins = "gpio24"; function = "qup06"; }; - qup_uart6_rts: qup-uart6-rts-pins { + qup_uart6_rts: qup-uart6-rts-state { pins = "gpio25"; function = "qup06"; }; - qup_uart6_tx: qup-uart6-tx-pins { + qup_uart6_tx: qup-uart6-tx-state { pins = "gpio26"; function = "qup06"; }; - qup_uart6_rx: qup-uart6-rx-pins { + qup_uart6_rx: qup-uart6-rx-state { pins = "gpio27"; function = "qup06"; }; - qup_uart7_cts: qup-uart7-cts-pins { + qup_uart7_cts: qup-uart7-cts-state { pins = "gpio28"; function = "qup07"; }; - qup_uart7_rts: qup-uart7-rts-pins { + qup_uart7_rts: qup-uart7-rts-state { pins = "gpio29"; function = "qup07"; }; - qup_uart7_tx: qup-uart7-tx-pins { + qup_uart7_tx: qup-uart7-tx-state { pins = "gpio30"; function = "qup07"; }; - qup_uart7_rx: qup-uart7-rx-pins { + qup_uart7_rx: qup-uart7-rx-state { pins = "gpio31"; function = "qup07"; }; - qup_uart8_cts: qup-uart8-cts-pins { + qup_uart8_cts: qup-uart8-cts-state { pins = "gpio32"; function = "qup10"; }; - qup_uart8_rts: qup-uart8-rts-pins { + qup_uart8_rts: qup-uart8-rts-state { pins = "gpio33"; function = "qup10"; }; - qup_uart8_tx: qup-uart8-tx-pins { + qup_uart8_tx: qup-uart8-tx-state { pins = "gpio34"; function = "qup10"; }; - qup_uart8_rx: qup-uart8-rx-pins { + qup_uart8_rx: qup-uart8-rx-state { pins = "gpio35"; function = "qup10"; }; - qup_uart9_cts: qup-uart9-cts-pins { + qup_uart9_cts: qup-uart9-cts-state { pins = "gpio36"; function = "qup11"; }; - qup_uart9_rts: qup-uart9-rts-pins { + qup_uart9_rts: qup-uart9-rts-state { pins = "gpio37"; function = "qup11"; }; - qup_uart9_tx: qup-uart9-tx-pins { + qup_uart9_tx: qup-uart9-tx-state { pins = "gpio38"; function = "qup11"; }; - qup_uart9_rx: qup-uart9-rx-pins { + qup_uart9_rx: qup-uart9-rx-state { pins = "gpio39"; function = "qup11"; }; - qup_uart10_cts: qup-uart10-cts-pins { + qup_uart10_cts: qup-uart10-cts-state { pins = "gpio40"; function = "qup12"; }; - qup_uart10_rts: qup-uart10-rts-pins { + qup_uart10_rts: qup-uart10-rts-state { pins = "gpio41"; function = "qup12"; }; - qup_uart10_tx: qup-uart10-tx-pins { + qup_uart10_tx: qup-uart10-tx-state { pins = "gpio42"; function = "qup12"; }; - qup_uart10_rx: qup-uart10-rx-pins { + qup_uart10_rx: qup-uart10-rx-state { pins = "gpio43"; function = "qup12"; }; - qup_uart11_cts: qup-uart11-cts-pins { + qup_uart11_cts: qup-uart11-cts-state { pins = "gpio44"; function = "qup13"; }; - qup_uart11_rts: qup-uart11-rts-pins { + qup_uart11_rts: qup-uart11-rts-state { pins = "gpio45"; function = "qup13"; }; - qup_uart11_tx: qup-uart11-tx-pins { + qup_uart11_tx: qup-uart11-tx-state { pins = "gpio46"; function = "qup13"; }; - qup_uart11_rx: qup-uart11-rx-pins { + qup_uart11_rx: qup-uart11-rx-state { pins = "gpio47"; function = "qup13"; }; - qup_uart12_cts: qup-uart12-cts-pins { + qup_uart12_cts: qup-uart12-cts-state { pins = "gpio48"; function = "qup14"; }; - qup_uart12_rts: qup-uart12-rts-pins { + qup_uart12_rts: qup-uart12-rts-state { pins = "gpio49"; function = "qup14"; }; - qup_uart12_tx: qup-uart12-tx-pins { + qup_uart12_tx: qup-uart12-tx-state { pins = "gpio50"; function = "qup14"; }; - qup_uart12_rx: qup-uart12-rx-pins { + qup_uart12_rx: qup-uart12-rx-state { pins = "gpio51"; function = "qup14"; }; - qup_uart13_cts: qup-uart13-cts-pins { + qup_uart13_cts: qup-uart13-cts-state { pins = "gpio52"; function = "qup15"; }; - qup_uart13_rts: qup-uart13-rts-pins { + qup_uart13_rts: qup-uart13-rts-state { pins = "gpio53"; function = "qup15"; }; - qup_uart13_tx: qup-uart13-tx-pins { + qup_uart13_tx: qup-uart13-tx-state { pins = "gpio54"; function = "qup15"; }; - qup_uart13_rx: qup-uart13-rx-pins { + qup_uart13_rx: qup-uart13-rx-state { pins = "gpio55"; function = "qup15"; }; - qup_uart14_cts: qup-uart14-cts-pins { + qup_uart14_cts: qup-uart14-cts-state { pins = "gpio56"; function = "qup16"; }; - qup_uart14_rts: qup-uart14-rts-pins { + qup_uart14_rts: qup-uart14-rts-state { pins = "gpio57"; function = "qup16"; }; - qup_uart14_tx: qup-uart14-tx-pins { + qup_uart14_tx: qup-uart14-tx-state { pins = "gpio58"; function = "qup16"; }; - qup_uart14_rx: qup-uart14-rx-pins { + qup_uart14_rx: qup-uart14-rx-state { pins = "gpio59"; function = "qup16"; }; - qup_uart15_cts: qup-uart15-cts-pins { + qup_uart15_cts: qup-uart15-cts-state { pins = "gpio60"; function = "qup17"; }; - qup_uart15_rts: qup-uart15-rts-pins { + qup_uart15_rts: qup-uart15-rts-state { pins = "gpio61"; function = "qup17"; }; - qup_uart15_tx: qup-uart15-tx-pins { + qup_uart15_tx: qup-uart15-tx-state { pins = "gpio62"; function = "qup17"; }; - qup_uart15_rx: qup-uart15-rx-pins { + qup_uart15_rx: qup-uart15-rx-state { pins = "gpio63"; function = "qup17"; }; - sdc1_clk: sdc1-clk-pins { + sdc1_clk: sdc1-clk-state { pins = "sdc1_clk"; }; - sdc1_cmd: sdc1-cmd-pins { + sdc1_cmd: sdc1-cmd-state { pins = "sdc1_cmd"; }; - sdc1_data: sdc1-data-pins { + sdc1_data: sdc1-data-state { pins = "sdc1_data"; }; - sdc1_rclk: sdc1-rclk-pins { + sdc1_rclk: sdc1-rclk-state { pins = "sdc1_rclk"; }; - sdc1_clk_sleep: sdc1-clk-sleep-pins { + sdc1_clk_sleep: sdc1-clk-sleep-state { pins = "sdc1_clk"; drive-strength = <2>; bias-bus-hold; }; - sdc1_cmd_sleep: sdc1-cmd-sleep-pins { + sdc1_cmd_sleep: sdc1-cmd-sleep-state { pins = "sdc1_cmd"; drive-strength = <2>; bias-bus-hold; }; - sdc1_data_sleep: sdc1-data-sleep-pins { + sdc1_data_sleep: sdc1-data-sleep-state { pins = "sdc1_data"; drive-strength = <2>; bias-bus-hold; }; - sdc1_rclk_sleep: sdc1-rclk-sleep-pins { + sdc1_rclk_sleep: sdc1-rclk-sleep-state { pins = "sdc1_rclk"; drive-strength = <2>; bias-bus-hold; }; - sdc2_clk: sdc2-clk-pins { + sdc2_clk: sdc2-clk-state { pins = "sdc2_clk"; }; - sdc2_cmd: sdc2-cmd-pins { + sdc2_cmd: sdc2-cmd-state { pins = "sdc2_cmd"; }; - sdc2_data: sdc2-data-pins { + sdc2_data: sdc2-data-state { pins = "sdc2_data"; }; - sdc2_clk_sleep: sdc2-clk-sleep-pins { + sdc2_clk_sleep: sdc2-clk-sleep-state { pins = "sdc2_clk"; drive-strength = <2>; bias-bus-hold; }; - sdc2_cmd_sleep: sdc2-cmd-sleep-pins { + sdc2_cmd_sleep: sdc2-cmd-sleep-state { pins = "sdc2_cmd"; drive-strength = <2>; bias-bus-hold; }; - sdc2_data_sleep: sdc2-data-sleep-pins { + sdc2_data_sleep: sdc2-data-sleep-state { pins = "sdc2_data"; drive-strength = <2>; bias-bus-hold; @@ -5321,7 +5365,7 @@ }; cpufreq_hw: cpufreq@18591000 { - compatible = "qcom,cpufreq-epss"; + compatible = "qcom,sc7280-cpufreq-epss", "qcom,cpufreq-epss"; reg = <0 0x18591000 0 0x1000>, <0 0x18592000 0 0x1000>, <0 0x18593000 0 0x1000>; diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts index fea7d8273ccd..ab5b0aadeead 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts +++ b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts @@ -37,7 +37,7 @@ vreg_edp_bl: regulator-edp-bl { compatible = "regulator-fixed"; - regulator-name = "VREG_EDP_BL"; + regulator-name = "VBL9"; regulator-min-microvolt = <3600000>; regulator-max-microvolt = <3600000>; @@ -50,10 +50,24 @@ regulator-boot-on; }; + vreg_nvme: regulator-nvme { + compatible = "regulator-fixed"; + + regulator-name = "VCC3_SSD"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 135 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&nvme_reg_en>; + }; + vreg_misc_3p3: regulator-misc-3p3 { compatible = "regulator-fixed"; - regulator-name = "VREG_MISC_3P3"; + regulator-name = "VCC3B"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -66,6 +80,38 @@ regulator-boot-on; regulator-always-on; }; + + vreg_wlan: regulator-wlan { + compatible = "regulator-fixed"; + + regulator-name = "VCC_WLAN_3R9"; + regulator-min-microvolt = <3900000>; + regulator-max-microvolt = <3900000>; + + gpio = <&pmr735a_gpios 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&hastings_reg_en>; + + regulator-boot-on; + }; + + vreg_wwan: regulator-wwan { + compatible = "regulator-fixed"; + + regulator-name = "VCC3B_WAN"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&pmc8280_2_gpios 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&wwan_sw_en>; + + regulator-boot-on; + }; }; &apps_rsc { @@ -178,6 +224,63 @@ }; }; +&pcie2a { + perst-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>; + + vddpe-3v3-supply = <&vreg_nvme>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie2a_default>; + + status = "okay"; +}; + +&pcie2a_phy { + vdda-phy-supply = <&vreg_l6d>; + vdda-pll-supply = <&vreg_l4d>; + + status = "okay"; +}; + +&pcie3a { + perst-gpios = <&tlmm 151 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>; + + vddpe-3v3-supply = <&vreg_wwan>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie3a_default>; + + status = "okay"; +}; + +&pcie3a_phy { + vdda-phy-supply = <&vreg_l6d>; + vdda-pll-supply = <&vreg_l4d>; + + status = "okay"; +}; + +&pcie4 { + perst-gpios = <&tlmm 141 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 139 GPIO_ACTIVE_LOW>; + + vddpe-3v3-supply = <&vreg_wlan>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie4_default>; + + status = "okay"; +}; + +&pcie4_phy { + vdda-phy-supply = <&vreg_l6d>; + vdda-pll-supply = <&vreg_l4d>; + + status = "okay"; +}; + &pmc8280c_lpg { status = "okay"; }; @@ -363,6 +466,13 @@ }; }; +&pmc8280_2_gpios { + wwan_sw_en: wwan-sw-en-state { + pins = "gpio1"; + function = "normal"; + }; +}; + &pmc8280c_gpios { edp_bl_pwm: edp-bl-pwm-state { pins = "gpio8"; @@ -370,29 +480,112 @@ }; }; +&pmr735a_gpios { + hastings_reg_en: hastings-reg-en-state { + pins = "gpio1"; + function = "normal"; + }; +}; + &tlmm { gpio-reserved-ranges = <74 6>, <83 4>, <125 2>, <128 2>, <154 7>; kybd_default: kybd-default-state { - disable { + disable-pins { pins = "gpio102"; function = "gpio"; output-low; }; - int-n { + int-n-pins { pins = "gpio104"; function = "gpio"; bias-disable; }; - reset { + reset-pins { pins = "gpio105"; function = "gpio"; bias-disable; }; }; + nvme_reg_en: nvme-reg-en-state { + pins = "gpio135"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + pcie2a_default: pcie2a-default-state { + clkreq-n-pins { + pins = "gpio142"; + function = "pcie2a_clkreq"; + drive-strength = <2>; + bias-pull-up; + }; + + perst-n-pins { + pins = "gpio143"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + wake-n-pins { + pins = "gpio145"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + pcie3a_default: pcie3a-default-state { + clkreq-n-pins { + pins = "gpio150"; + function = "pcie3a_clkreq"; + drive-strength = <2>; + bias-pull-up; + }; + + perst-n-pins { + pins = "gpio151"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + wake-n-pins { + pins = "gpio148"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + pcie4_default: pcie4-default-state { + clkreq-n-pins { + pins = "gpio140"; + function = "pcie4_clkreq"; + drive-strength = <2>; + bias-pull-up; + }; + + perst-n-pins { + pins = "gpio141"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + wake-n-pins { + pins = "gpio139"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + qup0_i2c4_default: qup0-i2c4-default-state { pins = "gpio171", "gpio172"; function = "qup4"; @@ -410,7 +603,7 @@ }; tpad_default: tpad-default-state { - int-n { + int-n-pins { pins = "gpio182"; function = "gpio"; bias-disable; @@ -418,13 +611,13 @@ }; ts0_default: ts0-default-state { - int-n { + int-n-pins { pins = "gpio175"; function = "gpio"; bias-disable; }; - reset-n { + reset-n-pins { pins = "gpio99"; function = "gpio"; output-high; diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts index b2b744bb8a53..568c6be1ceaa 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts +++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts @@ -7,6 +7,11 @@ /dts-v1/; #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/iio/qcom,spmi-adc7-pm8350.h> +#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h> +#include <dt-bindings/iio/qcom,spmi-adc7-pmr735a.h> +#include <dt-bindings/input/gpio-keys.h> +#include <dt-bindings/input/input.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include "sc8280xp.dtsi" @@ -26,6 +31,67 @@ pinctrl-0 = <&edp_bl_en>, <&edp_bl_pwm>; }; + thermal-zones { + skin-temp-thermal { + polling-delay-passive = <250>; + polling-delay = <0>; + thermal-sensors = <&pmk8280_adc_tm 5>; + + trips { + skin_temp_alert0: trip-point0 { + temperature = <55000>; + hysteresis = <1000>; + type = "passive"; + }; + + skin_temp_alert1: trip-point1 { + temperature = <58000>; + hysteresis = <1000>; + type = "passive"; + }; + + skin-temp-crit { + temperature = <73000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&skin_temp_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + + map1 { + trip = <&skin_temp_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&hall_int_n_default>; + + switch-lid { + gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; + linux,input-type = <EV_SW>; + linux,code = <SW_LID>; + wakeup-source; + wakeup-event-action = <EV_ACT_DEASSERTED>; + }; + }; + vreg_edp_bl: regulator-edp-bl { compatible = "regulator-fixed"; @@ -58,6 +124,54 @@ regulator-boot-on; regulator-always-on; }; + + vreg_nvme: regulator-nvme { + compatible = "regulator-fixed"; + + regulator-name = "VCC3_SSD"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 135 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&nvme_reg_en>; + + regulator-boot-on; + }; + + vreg_wlan: regulator-wlan { + compatible = "regulator-fixed"; + + regulator-name = "VCC_WLAN_3R9"; + regulator-min-microvolt = <3900000>; + regulator-max-microvolt = <3900000>; + + gpio = <&pmr735a_gpios 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&hastings_reg_en>; + + regulator-boot-on; + }; + + vreg_wwan: regulator-wwan { + compatible = "regulator-fixed"; + + regulator-name = "VCC3B_WAN"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&pmc8280_2_gpios 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&wwan_sw_en>; + + regulator-boot-on; + }; }; &apps_rsc { @@ -95,7 +209,7 @@ regulator-max-microvolt = <880000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; regulator-boot-on; - regulator-always-on; // FIXME: VDD_A_EDP_0_0P9 + regulator-always-on; /* FIXME: VDD_A_EDP_0_0P9 */ }; }; @@ -145,6 +259,13 @@ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; + vreg_l6d: ldo6 { + regulator-name = "vreg_l6d"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + vreg_l7d: ldo7 { regulator-name = "vreg_l7d"; regulator-min-microvolt = <3072000>; @@ -161,14 +282,221 @@ }; }; +&pcie2a { + perst-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>; + + vddpe-3v3-supply = <&vreg_nvme>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie2a_default>; + + status = "okay"; +}; + +&pcie2a_phy { + vdda-phy-supply = <&vreg_l6d>; + vdda-pll-supply = <&vreg_l4d>; + + status = "okay"; +}; + +&pcie3a { + perst-gpios = <&tlmm 151 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>; + + vddpe-3v3-supply = <&vreg_wwan>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie3a_default>; + + status = "okay"; +}; + +&pcie3a_phy { + vdda-phy-supply = <&vreg_l6d>; + vdda-pll-supply = <&vreg_l4d>; + + status = "okay"; +}; + +&pcie4 { + perst-gpios = <&tlmm 141 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 139 GPIO_ACTIVE_LOW>; + + vddpe-3v3-supply = <&vreg_wlan>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie4_default>; + + status = "okay"; +}; + +&pcie4_phy { + vdda-phy-supply = <&vreg_l6d>; + vdda-pll-supply = <&vreg_l4d>; + + status = "okay"; +}; + &pmc8280c_lpg { status = "okay"; }; +&pmk8280_adc_tm { + status = "okay"; + + sys-therm@0 { + reg = <0>; + io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM1_100K_PU(1)>; + qcom,hw-settle-time-us = <200>; + qcom,avg-samples = <2>; + qcom,ratiometric; + }; + + sys-therm@1 { + reg = <1>; + io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM2_100K_PU(1)>; + qcom,hw-settle-time-us = <200>; + qcom,avg-samples = <2>; + qcom,ratiometric; + }; + + sys-therm@2 { + reg = <2>; + io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM3_100K_PU(1)>; + qcom,hw-settle-time-us = <200>; + qcom,avg-samples = <2>; + qcom,ratiometric; + }; + + sys-therm@3 { + reg = <3>; + io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM4_100K_PU(1)>; + qcom,hw-settle-time-us = <200>; + qcom,avg-samples = <2>; + qcom,ratiometric; + }; + + sys-therm@4 { + reg = <4>; + io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM1_100K_PU(3)>; + qcom,hw-settle-time-us = <200>; + qcom,avg-samples = <2>; + qcom,ratiometric; + }; + + sys-therm@5 { + reg = <5>; + io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM2_100K_PU(3)>; + qcom,hw-settle-time-us = <200>; + qcom,avg-samples = <2>; + qcom,ratiometric; + }; + + sys-therm@6 { + reg = <6>; + io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM3_100K_PU(3)>; + qcom,hw-settle-time-us = <200>; + qcom,avg-samples = <2>; + qcom,ratiometric; + }; + + sys-therm@7 { + reg = <7>; + io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM4_100K_PU(3)>; + qcom,hw-settle-time-us = <200>; + qcom,avg-samples = <2>; + qcom,ratiometric; + }; +}; + &pmk8280_pon_pwrkey { status = "okay"; }; +&pmk8280_pon_resin { + status = "okay"; +}; + +&pmk8280_vadc { + status = "okay"; + + pmic-die-temp@3 { + reg = <PMK8350_ADC7_DIE_TEMP>; + qcom,pre-scaling = <1 1>; + }; + + xo-therm@44 { + reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>; + qcom,hw-settle-time = <200>; + qcom,ratiometric; + }; + + pmic-die-temp@103 { + reg = <PM8350_ADC7_DIE_TEMP(1)>; + qcom,pre-scaling = <1 1>; + }; + + sys-therm@144 { + reg = <PM8350_ADC7_AMUX_THM1_100K_PU(1)>; + qcom,hw-settle-time = <200>; + qcom,ratiometric; + }; + + sys-therm@145 { + reg = <PM8350_ADC7_AMUX_THM2_100K_PU(1)>; + qcom,hw-settle-time = <200>; + qcom,ratiometric; + }; + + sys-therm@146 { + reg = <PM8350_ADC7_AMUX_THM3_100K_PU(1)>; + qcom,hw-settle-time = <200>; + qcom,ratiometric; + }; + + sys-therm@147 { + reg = <PM8350_ADC7_AMUX_THM4_100K_PU(1)>; + qcom,hw-settle-time = <200>; + qcom,ratiometric; + }; + + pmic-die-temp@303 { + reg = <PM8350_ADC7_DIE_TEMP(3)>; + qcom,pre-scaling = <1 1>; + }; + + sys-therm@344 { + reg = <PM8350_ADC7_AMUX_THM1_100K_PU(3)>; + qcom,hw-settle-time = <200>; + qcom,ratiometric; + }; + + sys-therm@345 { + reg = <PM8350_ADC7_AMUX_THM2_100K_PU(3)>; + qcom,hw-settle-time = <200>; + qcom,ratiometric; + }; + + sys-therm@346 { + reg = <PM8350_ADC7_AMUX_THM3_100K_PU(3)>; + qcom,hw-settle-time = <200>; + qcom,ratiometric; + }; + + sys-therm@347 { + reg = <PM8350_ADC7_AMUX_THM4_100K_PU(3)>; + qcom,hw-settle-time = <200>; + qcom,ratiometric; + }; + + pmic-die-temp@403 { + reg = <PMR735A_ADC7_DIE_TEMP>; + qcom,pre-scaling = <1 1>; + }; +}; + &qup0 { status = "okay"; }; @@ -339,6 +667,13 @@ }; }; +&pmc8280_2_gpios { + wwan_sw_en: wwan-sw-en-state { + pins = "gpio1"; + function = "normal"; + }; +}; + &pmc8280c_gpios { edp_bl_pwm: edp-bl-pwm-state { pins = "gpio8"; @@ -346,29 +681,119 @@ }; }; +&pmr735a_gpios { + hastings_reg_en: hastings-reg-en-state { + pins = "gpio1"; + function = "normal"; + }; +}; + &tlmm { gpio-reserved-ranges = <70 2>, <74 6>, <83 4>, <125 2>, <128 2>, <154 7>; + hall_int_n_default: hall-int-n-state { + pins = "gpio107"; + function = "gpio"; + input-enable; + bias-disable; + }; + kybd_default: kybd-default-state { - disable { + disable-pins { pins = "gpio102"; function = "gpio"; output-low; }; - int-n { + int-n-pins { pins = "gpio104"; function = "gpio"; bias-disable; }; - reset { + reset-pins { pins = "gpio105"; function = "gpio"; bias-disable; }; }; + nvme_reg_en: nvme-reg-en-state { + pins = "gpio135"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + pcie2a_default: pcie2a-default-state { + clkreq-n-pins { + pins = "gpio142"; + function = "pcie2a_clkreq"; + drive-strength = <2>; + bias-pull-up; + }; + + perst-n-pins { + pins = "gpio143"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + wake-n-pins { + pins = "gpio145"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + pcie3a_default: pcie3a-default-state { + clkreq-n-pins { + pins = "gpio150"; + function = "pcie3a_clkreq"; + drive-strength = <2>; + bias-pull-up; + }; + + perst-n-pins { + pins = "gpio151"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + wake-n-pins { + pins = "gpio148"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + pcie4_default: pcie4-default-state { + clkreq-n-pins { + pins = "gpio140"; + function = "pcie4_clkreq"; + drive-strength = <2>; + bias-pull-up; + }; + + perst-n-pins { + pins = "gpio141"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + wake-n-pins { + pins = "gpio139"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + qup0_i2c4_default: qup0-i2c4-default-state { pins = "gpio171", "gpio172"; function = "qup4"; @@ -384,7 +809,7 @@ }; tpad_default: tpad-default-state { - int-n { + int-n-pins { pins = "gpio182"; function = "gpio"; bias-disable; @@ -392,13 +817,13 @@ }; ts0_default: ts0-default-state { - int-n { + int-n-pins { pins = "gpio175"; function = "gpio"; bias-disable; }; - reset-n { + reset-n-pins { pins = "gpio99"; function = "gpio"; output-high; diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi index 24836b6b9bbc..f2c0b71b5d8e 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi +++ b/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi @@ -7,6 +7,50 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/spmi/spmi.h> +/ { + thermal-zones { + pm8280_1_thermal: pm8280-1-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + thermal-sensors = <&pm8280_1_temp_alarm>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + pm8280_2_thermal: pm8280-2-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + thermal-sensors = <&pm8280_2_temp_alarm>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; +}; + &spmi_bus { pmk8280: pmic@0 { compatible = "qcom,pmk8350", "qcom,spmi-pmic"; @@ -24,6 +68,32 @@ linux,code = <KEY_POWER>; status = "disabled"; }; + + pmk8280_pon_resin: resin { + compatible = "qcom,pmk8350-resin"; + interrupts = <0x0 0x13 0x6 IRQ_TYPE_EDGE_BOTH>; + status = "disabled"; + }; + }; + + pmk8280_vadc: adc@3100 { + compatible = "qcom,spmi-adc7"; + reg = <0x3100>; + interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + status = "disabled"; + }; + + pmk8280_adc_tm: adc-tm@3400 { + compatible = "qcom,spmi-adc-tm5-gen2"; + reg = <0x3400>; + interrupts = <0x0 0x34 0x0 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + #thermal-sensor-cells = <1>; + status = "disabled"; }; }; @@ -33,6 +103,13 @@ #address-cells = <1>; #size-cells = <0>; + pm8280_1_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts = <0x1 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + pmc8280_1_gpios: gpio@8800 { compatible = "qcom,pm8350-gpio", "qcom,spmi-gpio"; reg = <0x8800>; @@ -78,6 +155,13 @@ #address-cells = <1>; #size-cells = <0>; + pm8280_2_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts = <0x2 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + pmc8280_2_gpios: gpio@8800 { compatible = "qcom,pm8350-gpio", "qcom,spmi-gpio"; reg = <0x8800>; diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi index c32bcded2aef..be72b1f7ad61 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi @@ -729,11 +729,11 @@ <0>, <0>, <0>, - <0>, - <0>, - <0>, - <0>, - <0>, + <&pcie2a_phy>, + <&pcie2b_phy>, + <&pcie3a_phy>, + <&pcie3b_phy>, + <&pcie4_phy>, <0>, <0>; power-domains = <&rpmhpd SC8280XP_CX>; @@ -839,6 +839,489 @@ status = "disabled"; }; + pcie4: pcie@1c00000 { + device_type = "pci"; + compatible = "qcom,pcie-sc8280xp"; + reg = <0x0 0x01c00000 0x0 0x3000>, + <0x0 0x30000000 0x0 0xf1d>, + <0x0 0x30000f20 0x0 0xa8>, + <0x0 0x30001000 0x0 0x1000>, + <0x0 0x30100000 0x0 0x100000>; + reg-names = "parf", "dbi", "elbi", "atu", "config"; + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x01000000 0x0 0x30200000 0x0 0x30200000 0x0 0x100000>, + <0x02000000 0x0 0x30300000 0x0 0x30300000 0x0 0x1d00000>; + bus-range = <0x00 0xff>; + + linux,pci-domain = <6>; + num-lanes = <1>; + + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", "msi1", "msi2", "msi3"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc 0 0 GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc 0 0 GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc 0 0 GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_PCIE_4_AUX_CLK>, + <&gcc GCC_PCIE_4_CFG_AHB_CLK>, + <&gcc GCC_PCIE_4_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_4_SLV_AXI_CLK>, + <&gcc GCC_PCIE_4_SLV_Q2A_AXI_CLK>, + <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_4_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_SOUTH_SF_AXI_CLK>, + <&gcc GCC_CNOC_PCIE4_QX_CLK>; + clock-names = "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "ddrss_sf_tbu", + "noc_aggr_4", + "noc_aggr_south_sf", + "cnoc_qx"; + + assigned-clocks = <&gcc GCC_PCIE_4_AUX_CLK>; + assigned-clock-rates = <19200000>; + + interconnects = <&aggre2_noc MASTER_PCIE_4 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_PCIE_4 0>; + interconnect-names = "pcie-mem", "cpu-pcie"; + + resets = <&gcc GCC_PCIE_4_BCR>; + reset-names = "pci"; + + power-domains = <&gcc PCIE_4_GDSC>; + + phys = <&pcie4_phy>; + phy-names = "pciephy"; + + status = "disabled"; + }; + + pcie4_phy: phy@1c06000 { + compatible = "qcom,sc8280xp-qmp-gen3x1-pcie-phy"; + reg = <0x0 0x01c06000 0x0 0x2000>; + + clocks = <&gcc GCC_PCIE_4_AUX_CLK>, + <&gcc GCC_PCIE_4_CFG_AHB_CLK>, + <&gcc GCC_PCIE_4_CLKREF_CLK>, + <&gcc GCC_PCIE4_PHY_RCHNG_CLK>, + <&gcc GCC_PCIE_4_PIPE_CLK>, + <&gcc GCC_PCIE_4_PIPEDIV2_CLK>; + clock-names = "aux", "cfg_ahb", "ref", "rchng", + "pipe", "pipediv2"; + + assigned-clocks = <&gcc GCC_PCIE4_PHY_RCHNG_CLK>; + assigned-clock-rates = <100000000>; + + power-domains = <&gcc PCIE_4_GDSC>; + + resets = <&gcc GCC_PCIE_4_PHY_BCR>; + reset-names = "phy"; + + #clock-cells = <0>; + clock-output-names = "pcie_4_pipe_clk"; + + #phy-cells = <0>; + + status = "disabled"; + }; + + pcie3b: pcie@1c08000 { + device_type = "pci"; + compatible = "qcom,pcie-sc8280xp"; + reg = <0x0 0x01c08000 0x0 0x3000>, + <0x0 0x32000000 0x0 0xf1d>, + <0x0 0x32000f20 0x0 0xa8>, + <0x0 0x32001000 0x0 0x1000>, + <0x0 0x32100000 0x0 0x100000>; + reg-names = "parf", "dbi", "elbi", "atu", "config"; + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x01000000 0x0 0x32200000 0x0 0x32200000 0x0 0x100000>, + <0x02000000 0x0 0x32300000 0x0 0x32300000 0x0 0x1d00000>; + bus-range = <0x00 0xff>; + + linux,pci-domain = <5>; + num-lanes = <2>; + + interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", "msi1", "msi2", "msi3"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 526 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc 0 0 GIC_SPI 527 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc 0 0 GIC_SPI 528 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc 0 0 GIC_SPI 529 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_PCIE_3B_AUX_CLK>, + <&gcc GCC_PCIE_3B_CFG_AHB_CLK>, + <&gcc GCC_PCIE_3B_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_3B_SLV_AXI_CLK>, + <&gcc GCC_PCIE_3B_SLV_Q2A_AXI_CLK>, + <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_4_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_SOUTH_SF_AXI_CLK>; + clock-names = "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "ddrss_sf_tbu", + "noc_aggr_4", + "noc_aggr_south_sf"; + + assigned-clocks = <&gcc GCC_PCIE_3B_AUX_CLK>; + assigned-clock-rates = <19200000>; + + interconnects = <&aggre2_noc MASTER_PCIE_3B 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_PCIE_3B 0>; + interconnect-names = "pcie-mem", "cpu-pcie"; + + resets = <&gcc GCC_PCIE_3B_BCR>; + reset-names = "pci"; + + power-domains = <&gcc PCIE_3B_GDSC>; + + phys = <&pcie3b_phy>; + phy-names = "pciephy"; + + status = "disabled"; + }; + + pcie3b_phy: phy@1c0e000 { + compatible = "qcom,sc8280xp-qmp-gen3x2-pcie-phy"; + reg = <0x0 0x01c0e000 0x0 0x2000>; + + clocks = <&gcc GCC_PCIE_3B_AUX_CLK>, + <&gcc GCC_PCIE_3B_CFG_AHB_CLK>, + <&gcc GCC_PCIE_3A3B_CLKREF_CLK>, + <&gcc GCC_PCIE3B_PHY_RCHNG_CLK>, + <&gcc GCC_PCIE_3B_PIPE_CLK>, + <&gcc GCC_PCIE_3B_PIPEDIV2_CLK>; + clock-names = "aux", "cfg_ahb", "ref", "rchng", + "pipe", "pipediv2"; + + assigned-clocks = <&gcc GCC_PCIE3B_PHY_RCHNG_CLK>; + assigned-clock-rates = <100000000>; + + power-domains = <&gcc PCIE_3B_GDSC>; + + resets = <&gcc GCC_PCIE_3B_PHY_BCR>; + reset-names = "phy"; + + #clock-cells = <0>; + clock-output-names = "pcie_3b_pipe_clk"; + + #phy-cells = <0>; + + status = "disabled"; + }; + + pcie3a: pcie@1c10000 { + device_type = "pci"; + compatible = "qcom,pcie-sc8280xp"; + reg = <0x0 0x01c10000 0x0 0x3000>, + <0x0 0x34000000 0x0 0xf1d>, + <0x0 0x34000f20 0x0 0xa8>, + <0x0 0x34001000 0x0 0x1000>, + <0x0 0x34100000 0x0 0x100000>; + reg-names = "parf", "dbi", "elbi", "atu", "config"; + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x01000000 0x0 0x34200000 0x0 0x34200000 0x0 0x100000>, + <0x02000000 0x0 0x34300000 0x0 0x34300000 0x0 0x1d00000>; + bus-range = <0x00 0xff>; + + linux,pci-domain = <4>; + num-lanes = <4>; + + interrupts = <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", "msi1", "msi2", "msi3"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 499 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc 0 0 GIC_SPI 542 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc 0 0 GIC_SPI 543 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc 0 0 GIC_SPI 544 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_PCIE_3A_AUX_CLK>, + <&gcc GCC_PCIE_3A_CFG_AHB_CLK>, + <&gcc GCC_PCIE_3A_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_3A_SLV_AXI_CLK>, + <&gcc GCC_PCIE_3A_SLV_Q2A_AXI_CLK>, + <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_4_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_SOUTH_SF_AXI_CLK>; + clock-names = "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "ddrss_sf_tbu", + "noc_aggr_4", + "noc_aggr_south_sf"; + + assigned-clocks = <&gcc GCC_PCIE_3A_AUX_CLK>; + assigned-clock-rates = <19200000>; + + interconnects = <&aggre2_noc MASTER_PCIE_3A 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_PCIE_3A 0>; + interconnect-names = "pcie-mem", "cpu-pcie"; + + resets = <&gcc GCC_PCIE_3A_BCR>; + reset-names = "pci"; + + power-domains = <&gcc PCIE_3A_GDSC>; + + phys = <&pcie3a_phy>; + phy-names = "pciephy"; + + status = "disabled"; + }; + + pcie3a_phy: phy@1c14000 { + compatible = "qcom,sc8280xp-qmp-gen3x4-pcie-phy"; + reg = <0x0 0x01c14000 0x0 0x2000>, + <0x0 0x01c16000 0x0 0x2000>; + + clocks = <&gcc GCC_PCIE_3A_AUX_CLK>, + <&gcc GCC_PCIE_3A_CFG_AHB_CLK>, + <&gcc GCC_PCIE_3A3B_CLKREF_CLK>, + <&gcc GCC_PCIE3A_PHY_RCHNG_CLK>, + <&gcc GCC_PCIE_3A_PIPE_CLK>, + <&gcc GCC_PCIE_3A_PIPEDIV2_CLK>; + clock-names = "aux", "cfg_ahb", "ref", "rchng", + "pipe", "pipediv2"; + + assigned-clocks = <&gcc GCC_PCIE3A_PHY_RCHNG_CLK>; + assigned-clock-rates = <100000000>; + + power-domains = <&gcc PCIE_3A_GDSC>; + + resets = <&gcc GCC_PCIE_3A_PHY_BCR>; + reset-names = "phy"; + + qcom,4ln-config-sel = <&tcsr 0xa044 1>; + + #clock-cells = <0>; + clock-output-names = "pcie_3a_pipe_clk"; + + #phy-cells = <0>; + + status = "disabled"; + }; + + pcie2b: pcie@1c18000 { + device_type = "pci"; + compatible = "qcom,pcie-sc8280xp"; + reg = <0x0 0x01c18000 0x0 0x3000>, + <0x0 0x38000000 0x0 0xf1d>, + <0x0 0x38000f20 0x0 0xa8>, + <0x0 0x38001000 0x0 0x1000>, + <0x0 0x38100000 0x0 0x100000>; + reg-names = "parf", "dbi", "elbi", "atu", "config"; + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x01000000 0x0 0x38200000 0x0 0x38200000 0x0 0x100000>, + <0x02000000 0x0 0x38300000 0x0 0x38300000 0x0 0x1d00000>; + bus-range = <0x00 0xff>; + + linux,pci-domain = <3>; + num-lanes = <2>; + + interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", "msi1", "msi2", "msi3"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc 0 0 GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc 0 0 GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc 0 0 GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_PCIE_2B_AUX_CLK>, + <&gcc GCC_PCIE_2B_CFG_AHB_CLK>, + <&gcc GCC_PCIE_2B_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_2B_SLV_AXI_CLK>, + <&gcc GCC_PCIE_2B_SLV_Q2A_AXI_CLK>, + <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_4_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_SOUTH_SF_AXI_CLK>; + clock-names = "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "ddrss_sf_tbu", + "noc_aggr_4", + "noc_aggr_south_sf"; + + assigned-clocks = <&gcc GCC_PCIE_2B_AUX_CLK>; + assigned-clock-rates = <19200000>; + + interconnects = <&aggre2_noc MASTER_PCIE_2B 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_PCIE_2B 0>; + interconnect-names = "pcie-mem", "cpu-pcie"; + + resets = <&gcc GCC_PCIE_2B_BCR>; + reset-names = "pci"; + + power-domains = <&gcc PCIE_2B_GDSC>; + + phys = <&pcie2b_phy>; + phy-names = "pciephy"; + + status = "disabled"; + }; + + pcie2b_phy: phy@1c1e000 { + compatible = "qcom,sc8280xp-qmp-gen3x2-pcie-phy"; + reg = <0x0 0x01c1e000 0x0 0x2000>; + + clocks = <&gcc GCC_PCIE_2B_AUX_CLK>, + <&gcc GCC_PCIE_2B_CFG_AHB_CLK>, + <&gcc GCC_PCIE_2A2B_CLKREF_CLK>, + <&gcc GCC_PCIE2B_PHY_RCHNG_CLK>, + <&gcc GCC_PCIE_2B_PIPE_CLK>, + <&gcc GCC_PCIE_2B_PIPEDIV2_CLK>; + clock-names = "aux", "cfg_ahb", "ref", "rchng", + "pipe", "pipediv2"; + + assigned-clocks = <&gcc GCC_PCIE2B_PHY_RCHNG_CLK>; + assigned-clock-rates = <100000000>; + + power-domains = <&gcc PCIE_2B_GDSC>; + + resets = <&gcc GCC_PCIE_2B_PHY_BCR>; + reset-names = "phy"; + + #clock-cells = <0>; + clock-output-names = "pcie_2b_pipe_clk"; + + #phy-cells = <0>; + + status = "disabled"; + }; + + pcie2a: pcie@1c20000 { + device_type = "pci"; + compatible = "qcom,pcie-sc8280xp"; + reg = <0x0 0x01c20000 0x0 0x3000>, + <0x0 0x3c000000 0x0 0xf1d>, + <0x0 0x3c000f20 0x0 0xa8>, + <0x0 0x3c001000 0x0 0x1000>, + <0x0 0x3c100000 0x0 0x100000>; + reg-names = "parf", "dbi", "elbi", "atu", "config"; + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x01000000 0x0 0x3c200000 0x0 0x3c200000 0x0 0x100000>, + <0x02000000 0x0 0x3c300000 0x0 0x3c300000 0x0 0x1d00000>; + bus-range = <0x00 0xff>; + + linux,pci-domain = <2>; + num-lanes = <4>; + + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 523 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 524 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 525 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", "msi1", "msi2", "msi3"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 530 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc 0 0 GIC_SPI 531 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc 0 0 GIC_SPI 532 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc 0 0 GIC_SPI 533 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_PCIE_2A_AUX_CLK>, + <&gcc GCC_PCIE_2A_CFG_AHB_CLK>, + <&gcc GCC_PCIE_2A_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_2A_SLV_AXI_CLK>, + <&gcc GCC_PCIE_2A_SLV_Q2A_AXI_CLK>, + <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_4_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_SOUTH_SF_AXI_CLK>; + clock-names = "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "ddrss_sf_tbu", + "noc_aggr_4", + "noc_aggr_south_sf"; + + assigned-clocks = <&gcc GCC_PCIE_2A_AUX_CLK>; + assigned-clock-rates = <19200000>; + + interconnects = <&aggre2_noc MASTER_PCIE_2A 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_PCIE_2A 0>; + interconnect-names = "pcie-mem", "cpu-pcie"; + + resets = <&gcc GCC_PCIE_2A_BCR>; + reset-names = "pci"; + + power-domains = <&gcc PCIE_2A_GDSC>; + + phys = <&pcie2a_phy>; + phy-names = "pciephy"; + + status = "disabled"; + }; + + pcie2a_phy: phy@1c24000 { + compatible = "qcom,sc8280xp-qmp-gen3x4-pcie-phy"; + reg = <0x0 0x01c24000 0x0 0x2000>, + <0x0 0x01c26000 0x0 0x2000>; + + clocks = <&gcc GCC_PCIE_2A_AUX_CLK>, + <&gcc GCC_PCIE_2A_CFG_AHB_CLK>, + <&gcc GCC_PCIE_2A2B_CLKREF_CLK>, + <&gcc GCC_PCIE2A_PHY_RCHNG_CLK>, + <&gcc GCC_PCIE_2A_PIPE_CLK>, + <&gcc GCC_PCIE_2A_PIPEDIV2_CLK>; + clock-names = "aux", "cfg_ahb", "ref", "rchng", + "pipe", "pipediv2"; + + assigned-clocks = <&gcc GCC_PCIE2A_PHY_RCHNG_CLK>; + assigned-clock-rates = <100000000>; + + power-domains = <&gcc PCIE_2A_GDSC>; + + resets = <&gcc GCC_PCIE_2A_PHY_BCR>; + reset-names = "phy"; + + qcom,4ln-config-sel = <&tcsr 0xa044 0>; + + #clock-cells = <0>; + clock-output-names = "pcie_2a_pipe_clk"; + + #phy-cells = <0>; + + status = "disabled"; + }; + ufs_mem_hc: ufs@1d84000 { compatible = "qcom,sc8280xp-ufshc", "qcom,ufshc", "jedec,ufs-2.0"; @@ -983,6 +1466,11 @@ #hwlock-cells = <1>; }; + tcsr: syscon@1fc0000 { + compatible = "qcom,sc8280xp-tcsr", "syscon"; + reg = <0x0 0x01fc0000 0x0 0x30000>; + }; + usb_0_hsphy: phy@88e5000 { compatible = "qcom,sc8280xp-usb-hs-phy", "qcom,usb-snps-hs-5nm-phy"; @@ -1048,70 +1536,56 @@ status = "disabled"; }; - usb_2_qmpphy0: phy-wrapper@88ef000 { + usb_2_qmpphy0: phy@88ef000 { compatible = "qcom,sc8280xp-qmp-usb3-uni-phy"; - reg = <0 0x088ef000 0 0x1c8>; - #address-cells = <2>; - #size-cells = <2>; - ranges; + reg = <0 0x088ef000 0 0x2000>; clocks = <&gcc GCC_USB3_MP_PHY_AUX_CLK>, <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_USB3_MP0_CLKREF_CLK>, - <&gcc GCC_USB3_MP_PHY_COM_AUX_CLK>; - clock-names = "aux", "ref_clk_src", "ref", "com_aux"; + <&gcc GCC_USB3_MP_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_MP_PHY_PIPE_0_CLK>; + clock-names = "aux", "ref_clk_src", "ref", "com_aux", + "pipe"; resets = <&gcc GCC_USB3_UNIPHY_MP0_BCR>, <&gcc GCC_USB3UNIPHY_PHY_MP0_BCR>; - reset-names = "phy", "common"; + reset-names = "phy", "phy_phy"; power-domains = <&gcc USB30_MP_GDSC>; - status = "disabled"; + #clock-cells = <0>; + clock-output-names = "usb2_phy0_pipe_clk"; - usb_2_ssphy0: phy@88efe00 { - reg = <0 0x088efe00 0 0x160>, - <0 0x088f0000 0 0x1ec>, - <0 0x088ef200 0 0x1f0>; - #phy-cells = <0>; - #clock-cells = <0>; - clocks = <&gcc GCC_USB3_MP_PHY_PIPE_0_CLK>; - clock-names = "pipe0"; - clock-output-names = "usb2_phy0_pipe_clk"; - }; + #phy-cells = <0>; + + status = "disabled"; }; - usb_2_qmpphy1: phy-wrapper@88f1000 { + usb_2_qmpphy1: phy@88f1000 { compatible = "qcom,sc8280xp-qmp-usb3-uni-phy"; - reg = <0 0x088f1000 0 0x1c8>; - #address-cells = <2>; - #size-cells = <2>; - ranges; + reg = <0 0x088f1000 0 0x2000>; clocks = <&gcc GCC_USB3_MP_PHY_AUX_CLK>, <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_USB3_MP1_CLKREF_CLK>, - <&gcc GCC_USB3_MP_PHY_COM_AUX_CLK>; - clock-names = "aux", "ref_clk_src", "ref", "com_aux"; + <&gcc GCC_USB3_MP_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_MP_PHY_PIPE_1_CLK>; + clock-names = "aux", "ref_clk_src", "ref", "com_aux", + "pipe"; resets = <&gcc GCC_USB3_UNIPHY_MP1_BCR>, <&gcc GCC_USB3UNIPHY_PHY_MP1_BCR>; - reset-names = "phy", "common"; + reset-names = "phy", "phy_phy"; power-domains = <&gcc USB30_MP_GDSC>; - status = "disabled"; + #clock-cells = <0>; + clock-output-names = "usb2_phy1_pipe_clk"; - usb_2_ssphy1: phy@88f1e00 { - reg = <0 0x088f1e00 0 0x160>, - <0 0x088f2000 0 0x1ec>, - <0 0x088f1200 0 0x1f0>; - #phy-cells = <0>; - #clock-cells = <0>; - clocks = <&gcc GCC_USB3_MP_PHY_PIPE_1_CLK>; - clock-names = "pipe0"; - clock-output-names = "usb2_phy1_pipe_clk"; - }; + #phy-cells = <0>; + + status = "disabled"; }; remoteproc_adsp: remoteproc@3000000 { @@ -1476,6 +1950,11 @@ #clock-cells = <0>; }; + sram@c3f0000 { + compatible = "qcom,rpmh-stats"; + reg = <0 0x0c3f0000 0 0x400>; + }; + spmi_bus: spmi@c440000 { compatible = "qcom,spmi-pmic-arb"; reg = <0 0x0c440000 0 0x1100>, diff --git a/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts b/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts index 28050bc5f081..cddbeade1ffc 100644 --- a/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts +++ b/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts @@ -99,7 +99,7 @@ }; &adsp_pil { - firmware-name = "qcom/ifc6560/adsp.mbn"; + firmware-name = "qcom/sda660/adsp.mbn"; }; &blsp_i2c6 { @@ -231,7 +231,7 @@ }; &rpm_requests { - pm660-regulators { + regulators-0 { compatible = "qcom,rpm-pm660-regulators"; vdd_s1-supply = <&vph_pwr>; @@ -313,7 +313,7 @@ }; }; - pm660l-regulators { + regulators-1 { compatible = "qcom,rpm-pm660l-regulators"; vdd_s1-supply = <&vph_pwr>; @@ -401,16 +401,18 @@ }; &sdc2_state_on { - sd-cd { + sd-cd-pins { pins = "gpio54"; + function = "gpio"; bias-pull-up; drive-strength = <2>; }; }; &sdc2_state_off { - sd-cd { + sd-cd-pins { pins = "gpio54"; + function = "gpio"; bias-disable; drive-strength = <2>; }; diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi index 09c07800793a..3d2b08d551d0 100644 --- a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi @@ -155,7 +155,7 @@ }; &adsp_pil { - firmware-name = "adsp.mdt"; + firmware-name = "qcom/sdm630/Sony/nile/adsp.mdt"; }; &blsp_i2c1 { @@ -260,7 +260,7 @@ }; &rpm_requests { - pm660l-regulators { + regulators-0 { compatible = "qcom,rpm-pm660l-regulators"; vdd_s1-supply = <&vph_pwr>; @@ -394,7 +394,7 @@ }; }; - pm660-regulators { + regulators-1 { compatible = "qcom,rpm-pm660-regulators"; vdd_s1-supply = <&vph_pwr>; @@ -577,16 +577,18 @@ }; &sdc2_state_on { - sd-cd { + sd-cd-pins { pins = "gpio54"; + function = "gpio"; bias-pull-up; drive-strength = <2>; }; }; &sdc2_state_off { - sd-cd { + sd-cd-pins { pins = "gpio54"; + function = "gpio"; bias-disable; drive-strength = <2>; }; @@ -615,33 +617,35 @@ &tlmm { gpio-reserved-ranges = <8 4>; - ts_int_active: ts-int-active { + ts_int_active: ts-int-active-state { pins = "gpio45"; + function = "gpio"; drive-strength = <8>; bias-pull-up; }; - ts_lcd_id_active: ts-lcd-id-active { + ts_lcd_id_active: ts-lcd-id-active-state { pins = "gpio56"; + function = "gpio"; drive-strength = <8>; bias-disable; }; - imx300_vana_default: imx300-vana-default { + imx300_vana_default: imx300-vana-default-state { pins = "gpio50"; function = "gpio"; bias-disable; drive-strength = <2>; }; - imx219_vana_default: imx219-vana-default { + imx219_vana_default: imx219-vana-default-state { pins = "gpio51"; function = "gpio"; bias-disable; drive-strength = <2>; }; - cam_vdig_default: cam-vdig-default { + cam_vdig_default: cam-vdig-default-state { pins = "gpio52"; function = "gpio"; bias-disable; diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi index b51b85f583e5..13e6a4fbba27 100644 --- a/arch/arm64/boot/dts/qcom/sdm630.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi @@ -721,33 +721,36 @@ interrupt-controller; #interrupt-cells = <2>; - blsp1_uart1_default: blsp1-uart1-default { + blsp1_uart1_default: blsp1-uart1-default-state { pins = "gpio0", "gpio1", "gpio2", "gpio3"; + function = "blsp_uart1"; drive-strength = <2>; bias-disable; }; - blsp1_uart1_sleep: blsp1-uart1-sleep { + blsp1_uart1_sleep: blsp1-uart1-sleep-state { pins = "gpio0", "gpio1", "gpio2", "gpio3"; + function = "gpio"; drive-strength = <2>; bias-disable; }; - blsp1_uart2_default: blsp1-uart2-default { + blsp1_uart2_default: blsp1-uart2-default-state { pins = "gpio4", "gpio5"; + function = "blsp_uart2"; drive-strength = <2>; bias-disable; }; - blsp2_uart1_default: blsp2-uart1-active { - tx-rts { + blsp2_uart1_default: blsp2-uart1-active-state { + tx-rts-pins { pins = "gpio16", "gpio19"; function = "blsp_uart5"; drive-strength = <2>; bias-disable; }; - rx { + rx-pins { /* * Avoid garbage data while BT module * is powered off or not driving signal @@ -758,7 +761,7 @@ bias-pull-up; }; - cts { + cts-pins { /* Match the pull of the BT module */ pins = "gpio18"; function = "blsp_uart5"; @@ -767,244 +770,232 @@ }; }; - blsp2_uart1_sleep: blsp2-uart1-sleep { - tx { + blsp2_uart1_sleep: blsp2-uart1-sleep-state { + tx-pins { pins = "gpio16"; function = "gpio"; drive-strength = <2>; bias-pull-up; }; - rx-cts-rts { + rx-cts-rts-pins { pins = "gpio17", "gpio18", "gpio19"; function = "gpio"; drive-strength = <2>; - bias-no-pull; + bias-disable; }; }; - i2c1_default: i2c1-default { + i2c1_default: i2c1-default-state { pins = "gpio2", "gpio3"; function = "blsp_i2c1"; drive-strength = <2>; bias-disable; }; - i2c1_sleep: i2c1-sleep { + i2c1_sleep: i2c1-sleep-state { pins = "gpio2", "gpio3"; function = "blsp_i2c1"; drive-strength = <2>; bias-pull-up; }; - i2c2_default: i2c2-default { + i2c2_default: i2c2-default-state { pins = "gpio6", "gpio7"; function = "blsp_i2c2"; drive-strength = <2>; bias-disable; }; - i2c2_sleep: i2c2-sleep { + i2c2_sleep: i2c2-sleep-state { pins = "gpio6", "gpio7"; function = "blsp_i2c2"; drive-strength = <2>; bias-pull-up; }; - i2c3_default: i2c3-default { + i2c3_default: i2c3-default-state { pins = "gpio10", "gpio11"; function = "blsp_i2c3"; drive-strength = <2>; bias-disable; }; - i2c3_sleep: i2c3-sleep { + i2c3_sleep: i2c3-sleep-state { pins = "gpio10", "gpio11"; function = "blsp_i2c3"; drive-strength = <2>; bias-pull-up; }; - i2c4_default: i2c4-default { + i2c4_default: i2c4-default-state { pins = "gpio14", "gpio15"; function = "blsp_i2c4"; drive-strength = <2>; bias-disable; }; - i2c4_sleep: i2c4-sleep { + i2c4_sleep: i2c4-sleep-state { pins = "gpio14", "gpio15"; function = "blsp_i2c4"; drive-strength = <2>; bias-pull-up; }; - i2c5_default: i2c5-default { + i2c5_default: i2c5-default-state { pins = "gpio18", "gpio19"; function = "blsp_i2c5"; drive-strength = <2>; bias-disable; }; - i2c5_sleep: i2c5-sleep { + i2c5_sleep: i2c5-sleep-state { pins = "gpio18", "gpio19"; function = "blsp_i2c5"; drive-strength = <2>; bias-pull-up; }; - i2c6_default: i2c6-default { + i2c6_default: i2c6-default-state { pins = "gpio22", "gpio23"; function = "blsp_i2c6"; drive-strength = <2>; bias-disable; }; - i2c6_sleep: i2c6-sleep { + i2c6_sleep: i2c6-sleep-state { pins = "gpio22", "gpio23"; function = "blsp_i2c6"; drive-strength = <2>; bias-pull-up; }; - i2c7_default: i2c7-default { + i2c7_default: i2c7-default-state { pins = "gpio26", "gpio27"; function = "blsp_i2c7"; drive-strength = <2>; bias-disable; }; - i2c7_sleep: i2c7-sleep { + i2c7_sleep: i2c7-sleep-state { pins = "gpio26", "gpio27"; function = "blsp_i2c7"; drive-strength = <2>; bias-pull-up; }; - i2c8_default: i2c8-default { + i2c8_default: i2c8-default-state { pins = "gpio30", "gpio31"; - function = "blsp_i2c8"; + function = "blsp_i2c8_a"; drive-strength = <2>; bias-disable; }; - i2c8_sleep: i2c8-sleep { + i2c8_sleep: i2c8-sleep-state { pins = "gpio30", "gpio31"; - function = "blsp_i2c8"; + function = "blsp_i2c8_a"; drive-strength = <2>; bias-pull-up; }; - cci0_default: cci0_default { - pinmux { - pins = "gpio36","gpio37"; - function = "cci_i2c"; - }; - - pinconf { - pins = "gpio36","gpio37"; - bias-pull-up; - drive-strength = <2>; - }; + cci0_default: cci0-default-state { + pins = "gpio36","gpio37"; + function = "cci_i2c"; + bias-pull-up; + drive-strength = <2>; }; - cci1_default: cci1_default { - pinmux { - pins = "gpio38","gpio39"; - function = "cci_i2c"; - }; - - pinconf { - pins = "gpio38","gpio39"; - bias-pull-up; - drive-strength = <2>; - }; + cci1_default: cci1-default-state { + pins = "gpio38","gpio39"; + function = "cci_i2c"; + bias-pull-up; + drive-strength = <2>; }; - sdc1_state_on: sdc1-on { - clk { + sdc1_state_on: sdc1-on-state { + clk-pins { pins = "sdc1_clk"; bias-disable; drive-strength = <16>; }; - cmd { + cmd-pins { pins = "sdc1_cmd"; bias-pull-up; drive-strength = <10>; }; - data { + data-pins { pins = "sdc1_data"; bias-pull-up; drive-strength = <10>; }; - rclk { + rclk-pins { pins = "sdc1_rclk"; bias-pull-down; }; }; - sdc1_state_off: sdc1-off { - clk { + sdc1_state_off: sdc1-off-state { + clk-pins { pins = "sdc1_clk"; bias-disable; drive-strength = <2>; }; - cmd { + cmd-pins { pins = "sdc1_cmd"; bias-pull-up; drive-strength = <2>; }; - data { + data-pins { pins = "sdc1_data"; bias-pull-up; drive-strength = <2>; }; - rclk { + rclk-pins { pins = "sdc1_rclk"; bias-pull-down; }; }; - sdc2_state_on: sdc2-on { - clk { + sdc2_state_on: sdc2-on-state { + clk-pins { pins = "sdc2_clk"; bias-disable; drive-strength = <16>; }; - cmd { + cmd-pins { pins = "sdc2_cmd"; bias-pull-up; drive-strength = <10>; }; - data { + data-pins { pins = "sdc2_data"; bias-pull-up; drive-strength = <10>; }; }; - sdc2_state_off: sdc2-off { - clk { + sdc2_state_off: sdc2-off-state { + clk-pins { pins = "sdc2_clk"; bias-disable; drive-strength = <2>; }; - cmd { + cmd-pins { pins = "sdc2_cmd"; bias-pull-up; drive-strength = <2>; }; - data { + data-pins { pins = "sdc2_data"; bias-pull-up; drive-strength = <2>; @@ -1616,7 +1607,6 @@ "core"; phys = <&dsi0_phy>; - phy-names = "dsi"; status = "disabled"; @@ -1639,7 +1629,7 @@ }; }; - dsi0_phy: dsi-phy@c994400 { + dsi0_phy: phy@c994400 { compatible = "qcom,dsi-phy-14nm-660"; reg = <0x0c994400 0x100>, <0x0c994500 0x300>, @@ -2224,12 +2214,12 @@ #address-cells = <1>; #size-cells = <0>; - q6core { + service@3 { reg = <APR_SVC_ADSP_CORE>; compatible = "qcom,q6core"; }; - q6afe: apr-service@4 { + q6afe: service@4 { compatible = "qcom,q6afe"; reg = <APR_SVC_AFE>; q6afedai: dais { @@ -2240,7 +2230,7 @@ }; }; - q6asm: apr-service@7 { + q6asm: service@7 { compatible = "qcom,q6asm"; reg = <APR_SVC_ASM>; q6asmdai: dais { @@ -2252,7 +2242,7 @@ }; }; - q6adm: apr-service@8 { + q6adm: service@8 { compatible = "qcom,q6adm"; reg = <APR_SVC_ADM>; q6routing: routing { diff --git a/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts b/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts index 891e314bc782..3fb513cad0a9 100644 --- a/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts +++ b/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts @@ -49,6 +49,20 @@ vdda-phy-dpdm-supply = <&pm8953_l13>; }; +&i2c_3 { + status = "okay"; + + touchscreen@48 { + compatible = "himax,hx83112b"; + reg = <0x48>; + interrupt-parent = <&tlmm>; + interrupts = <65 IRQ_TYPE_LEVEL_LOW>; + touchscreen-size-x = <1080>; + touchscreen-size-y = <2160>; + reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>; + }; +}; + &pm8953_resin { status = "okay"; linux,code = <KEY_VOLUMEDOWN>; @@ -69,7 +83,7 @@ }; &rpm_requests { - pm8953-regulators { + regulators { compatible = "qcom,rpm-pm8953-regulators"; vdd_l1-supply = <&pm8953_s3>; diff --git a/arch/arm64/boot/dts/qcom/sdm636-sony-xperia-ganges-mermaid.dts b/arch/arm64/boot/dts/qcom/sdm636-sony-xperia-ganges-mermaid.dts index 58f687fc49e0..9702e5f59a1d 100644 --- a/arch/arm64/boot/dts/qcom/sdm636-sony-xperia-ganges-mermaid.dts +++ b/arch/arm64/boot/dts/qcom/sdm636-sony-xperia-ganges-mermaid.dts @@ -19,7 +19,7 @@ }; &sdc2_state_on { - clk { + clk-pins { drive-strength = <14>; }; }; diff --git a/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts b/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts index a3559f6e34a5..8fb2d1788742 100644 --- a/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts +++ b/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts @@ -111,7 +111,7 @@ }; &rpm_requests { - pm660l-regulators { + regulators-0 { compatible = "qcom,rpm-pm660l-regulators"; vdd_s1-supply = <&vph_pwr>; @@ -206,7 +206,7 @@ }; }; - pm660-regulators { + regulators-1 { compatible = "qcom,rpm-pm660-regulators"; vdd_s1-supply = <&vph_pwr>; @@ -372,16 +372,18 @@ }; &sdc2_state_on { - sd-cd { + sd-cd-pins { pins = "gpio54"; + function = "gpio"; bias-pull-up; drive-strength = <2>; }; }; &sdc2_state_off { - sd-cd { + sd-cd-pins { pins = "gpio54"; + function = "gpio"; bias-disable; drive-strength = <2>; }; diff --git a/arch/arm64/boot/dts/qcom/sdm660.dtsi b/arch/arm64/boot/dts/qcom/sdm660.dtsi index 43220af1b685..d52123cb5cd3 100644 --- a/arch/arm64/boot/dts/qcom/sdm660.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm660.dtsi @@ -190,7 +190,6 @@ "core"; phys = <&dsi1_phy>; - phy-names = "dsi"; status = "disabled"; @@ -213,7 +212,7 @@ }; }; - dsi1_phy: dsi-phy@c996400 { + dsi1_phy: phy@c996400 { compatible = "qcom,dsi-phy-14nm-660"; reg = <0x0c996400 0x100>, <0x0c996500 0x300>, diff --git a/arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts b/arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts new file mode 100644 index 000000000000..cf2ae540db12 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts @@ -0,0 +1,531 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device tree for Google Pixel 3a, adapted from google-blueline device tree, + * xiaomi-lavender device tree, and oneplus-common device tree. + * + * Copyright (c) 2022, Richard Acayan. All rights reserved. + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include <dt-bindings/power/qcom-rpmpd.h> +#include "sdm670.dtsi" +#include "pm660.dtsi" +#include "pm660l.dtsi" + +/delete-node/ &mpss_region; +/delete-node/ &venus_mem; +/delete-node/ &wlan_msa_mem; +/delete-node/ &cdsp_mem; +/delete-node/ &mba_region; +/delete-node/ &adsp_mem; +/delete-node/ &ipa_fw_mem; +/delete-node/ &ipa_gsi_mem; +/delete-node/ &gpu_mem; + +/ { + model = "Google Pixel 3a"; + compatible = "google,sargo", "qcom,sdm670"; + + aliases { }; + + chosen { + stdout-path = "serial0:115200n8"; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + framebuffer@9c000000 { + compatible = "simple-framebuffer"; + reg = <0 0x9c000000 0 (1080 * 2220 * 4)>; + width = <1080>; + height = <2220>; + stride = <(1080 * 4)>; + format = "a8r8g8b8"; + }; + }; + + clocks { + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32764>; + }; + + xo_board: xo-board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <38400000>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + autorepeat; + + pinctrl-names = "default"; + pinctrl-0 = <&vol_up_pin>; + + key-vol-up { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + gpios = <&pm660l_gpios 7 GPIO_ACTIVE_LOW>; + }; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + + mpss_region: mpss@8b000000 { + reg = <0 0x8b000000 0 0x9800000>; + no-map; + }; + + venus_mem: venus@94800000 { + reg = <0 0x94800000 0 0x500000>; + no-map; + }; + + wlan_msa_mem: wlan-msa@94d00000 { + reg = <0 0x94d00000 0 0x100000>; + no-map; + }; + + cdsp_mem: cdsp@94e00000 { + reg = <0 0x94e00000 0 0x800000>; + no-map; + }; + + mba_region: mba@95600000 { + reg = <0 0x95600000 0 0x200000>; + no-map; + }; + + adsp_mem: adsp@95800000 { + reg = <0 0x95800000 0 0x2200000>; + no-map; + }; + + ipa_fw_mem: ipa-fw@97a00000 { + reg = <0 0x97a00000 0 0x10000>; + no-map; + }; + + ipa_gsi_mem: ipa-gsi@97a10000 { + reg = <0 0x97a10000 0 0x5000>; + no-map; + }; + + gpu_mem: gpu@97a15000 { + reg = <0 0x97a15000 0 0x2000>; + no-map; + }; + + framebuffer-region@9c000000 { + reg = <0 0x9c000000 0 0x2400000>; + no-map; + }; + + /* Also includes ramoops regions */ + debug_info_mem: debug-info@a1800000 { + reg = <0 0xa1800000 0 0x411000>; + no-map; + }; + }; + + /* + * The touchscreen regulator seems to be controlled somehow by a gpio. + * Model it as a fixed regulator and keep it on. Without schematics we + * don't know how this is actually wired up... + */ + ts_1p8_supply: ts-1p8-regulator { + compatible = "regulator-fixed"; + regulator-name = "ts_1p8_supply"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&pm660_gpios 12 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3312000>; + regulator-max-microvolt = <3312000>; + + regulator-always-on; + regulator-boot-on; + }; + + /* + * Supply map from xiaomi-lavender specifies this as the supply for + * ldob1, ldob9, ldob10, ldoa2, and ldoa3, while downstream specifies + * this as a power domain. Set this as a fixed regulator with the same + * voltage as lavender until display is needed to avoid unneccessarily + * using a deprecated binding (regulator-fixed-domain). + */ + vreg_s2b_1p05: vreg-s2b-regulator { + compatible = "regulator-fixed"; + regulator-name = "vreg_s2b"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + }; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm660-rpmh-regulators"; + qcom,pmic-id = "a"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + + vdd-l1-l6-l7-supply = <&vreg_s6a_0p87>; + vdd-l2-l3-supply = <&vreg_s2b_1p05>; + vdd-l5-supply = <&vreg_s2b_1p05>; + vdd-l8-l9-l10-l11-l12-l13-l14-supply = <&vreg_s4a_2p04>; + vdd-l15-l16-l17-l18-l19-supply = <&vreg_bob>; + + /* + * S1A (FTAPC0), S2A (FTAPC1), S3A (HFAPC1) are managed + * by the Core Power Reduction hardened (CPRh) and the + * Operating State Manager (OSM) HW automatically. + */ + + vreg_s4a_2p04: smps4 { + regulator-min-microvolt = <1808000>; + regulator-max-microvolt = <2040000>; + regulator-enable-ramp-delay = <200>; + }; + + vreg_s6a_0p87: smps6 { + regulator-min-microvolt = <1224000>; + regulator-max-microvolt = <1352000>; + regulator-enable-ramp-delay = <150>; + }; + + /* LDOs */ + vreg_l1a_1p225: ldo1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1250000>; + regulator-enable-ramp-delay = <250>; + }; + + vreg_l2a_1p0: ldo2 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-enable-ramp-delay = <250>; + }; + + vreg_l3a_1p0: ldo3 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-enable-ramp-delay = <250>; + }; + + vreg_l5a_0p848: ldo5 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-enable-ramp-delay = <250>; + }; + + vreg_l6a_1p3: ldo6 { + regulator-min-microvolt = <1248000>; + regulator-max-microvolt = <1304000>; + regulator-enable-ramp-delay = <250>; + }; + + vreg_l7a_1p2: ldo7 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-enable-ramp-delay = <250>; + }; + + vreg_l8a_1p8: ldo8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <250>; + }; + + vreg_l9a_1p8: ldo9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <250>; + }; + + vreg_l10a_1p8: ldo10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <250>; + }; + + vreg_l11a_1p8: ldo11 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <250>; + }; + + vreg_l12a_1p8: ldo12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <250>; + }; + + vreg_l13a_1p8: ldo13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <250>; + }; + + vreg_l14a_1p8: ldo14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <250>; + }; + + vreg_l15a_1p8: ldo15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-enable-ramp-delay = <250>; + }; + + vreg_l16a_2p7: ldo16 { + regulator-min-microvolt = <2696000>; + regulator-max-microvolt = <2696000>; + regulator-enable-ramp-delay = <250>; + }; + + vreg_l17a_1p8: ldo17 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-enable-ramp-delay = <250>; + }; + + vreg_l19a_3p3: ldo19 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3312000>; + regulator-enable-ramp-delay = <250>; + }; + }; + + regulators-1 { + compatible = "qcom,pm660l-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + + vdd-l1-l9-l10-supply = <&vreg_s2b_1p05>; + vdd-l2-supply = <&vreg_bob>; + vdd-l3-l5-l7-l8-supply = <&vreg_bob>; + vdd-l4-l6-supply = <&vreg_bob>; + vdd-bob-supply = <&vph_pwr>; + + /* LDOs */ + vreg_l1b_0p925: ldo1 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <900000>; + regulator-enable-ramp-delay = <250>; + }; + + vreg_l2b_2p95: ldo2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2960000>; + regulator-enable-ramp-delay = <250>; + }; + + vreg_l3b_3p0: ldo3 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <3008000>; + regulator-enable-ramp-delay = <250>; + }; + + vreg_l4b_2p95: ldo4 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-enable-ramp-delay = <250>; + }; + + vreg_l5b_2p95: ldo5 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-enable-ramp-delay = <250>; + }; + + vreg_l6b_3p3: ldo6 { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <250>; + }; + + vreg_l7b_3p125: ldo7 { + regulator-min-microvolt = <3088000>; + regulator-max-microvolt = <3100000>; + regulator-enable-ramp-delay = <250>; + }; + + vreg_l8b_3p3: ldo8 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3312000>; + regulator-enable-ramp-delay = <250>; + }; + + /* + * Downstream specifies a fixed voltage of 3.312 V, but the + * PMIC4 BOB ranges don't support that. Widen the range a + * little to avoid adding a new BOB regulator type. + */ + vreg_bob: bob { + regulator-min-microvolt = <3296000>; + regulator-max-microvolt = <3328000>; + regulator-enable-ramp-delay = <500>; + }; + }; + +}; + +&gcc { + protected-clocks = <GCC_QSPI_CORE_CLK>, + <GCC_QSPI_CORE_CLK_SRC>, + <GCC_QSPI_CNOC_PERIPH_AHB_CLK>; +}; + +&gpi_dma1 { + status = "okay"; +}; + +&i2c9 { + clock-frequency = <100000>; + status = "okay"; + + synaptics-rmi4-i2c@20 { + compatible = "syna,rmi4-i2c"; + reg = <0x20>; + interrupts-extended = <&tlmm 125 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-names = "default"; + pinctrl-0 = <&touchscreen_default>; + + vio-supply = <&ts_1p8_supply>; + + syna,reset-delay-ms = <200>; + syna,startup-delay-ms = <200>; + + #address-cells = <1>; + #size-cells = <0>; + + rmi4-f01@1 { + reg = <0x01>; + syna,nosleep-mode = <1>; + }; + + rmi4-f12@12 { + reg = <0x12>; + touchscreen-x-mm = <62>; + touchscreen-y-mm = <127>; + syna,sensor-type = <1>; + }; + }; +}; + +&pm660l_gpios { + vol_up_pin: vol-up-state { + pins = "gpio7"; + function = "normal"; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; + input-enable; + bias-pull-up; + }; +}; + +&pon_pwrkey { + status = "okay"; +}; + +&pon_resin { + linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&sdhc_1 { + supports-cqe; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + mmc-ddr-1_8v; + + qcom,ddr-config = <0xc3040873>; + + vmmc-supply = <&vreg_l4b_2p95>; + vqmmc-supply = <&vreg_l8a_1p8>; + + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>, <81 4>; + + touchscreen_default: ts-default-state { + ts-reset-pins { + pins = "gpio99"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + output-high; + }; + + ts-irq-pins { + pins = "gpio125"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + ts-switch-pins { + pins = "gpio135"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-low; + }; + }; +}; + +&usb_1_hsphy { + vdd-supply = <&vreg_l1b_0p925>; + vdda-pll-supply = <&vreg_l10a_1p8>; + vdda-phy-dpdm-supply = <&vreg_l7b_3p125>; + + status = "okay"; +}; + +&usb_1 { + qcom,select-utmi-as-pipe-clk; + status = "okay"; +}; + +&usb_1_dwc3 { + /* Only peripheral works for now */ + dr_mode = "peripheral"; + + /* Do not assume that sdm670.dtsi will never support USB 3.0 */ + phys = <&usb_1_hsphy>; + phy-names = "usb2-phy"; + maximum-speed = "high-speed"; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm670.dtsi b/arch/arm64/boot/dts/qcom/sdm670.dtsi new file mode 100644 index 000000000000..47363fde64ac --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm670.dtsi @@ -0,0 +1,1160 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * SDM670 SoC device tree source, adapted from SDM845 SoC device tree + * + * Copyright (c) 2018, The Linux Foundation. All rights reserved. + * Copyright (c) 2022, Richard Acayan. All rights reserved. + */ + +#include <dt-bindings/clock/qcom,gcc-sdm845.h> +#include <dt-bindings/clock/qcom,rpmh.h> +#include <dt-bindings/dma/qcom-gpi.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/phy/phy-qcom-qusb2.h> +#include <dt-bindings/power/qcom-rpmpd.h> +#include <dt-bindings/soc/qcom,rpmh-rsc.h> + +/ { + interrupt-parent = <&intc>; + + #address-cells = <2>; + #size-cells = <2>; + + aliases { }; + + chosen { }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "qcom,kryo360"; + reg = <0x0 0x0>; + enable-method = "psci"; + power-domains = <&CPU_PD0>; + power-domain-names = "psci"; + next-level-cache = <&L2_0>; + L2_0: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + L3_0: l3-cache { + compatible = "cache"; + }; + }; + }; + + CPU1: cpu@100 { + device_type = "cpu"; + compatible = "qcom,kryo360"; + reg = <0x0 0x100>; + enable-method = "psci"; + power-domains = <&CPU_PD1>; + power-domain-names = "psci"; + next-level-cache = <&L2_100>; + L2_100: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU2: cpu@200 { + device_type = "cpu"; + compatible = "qcom,kryo360"; + reg = <0x0 0x200>; + enable-method = "psci"; + power-domains = <&CPU_PD2>; + power-domain-names = "psci"; + next-level-cache = <&L2_200>; + L2_200: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU3: cpu@300 { + device_type = "cpu"; + compatible = "qcom,kryo360"; + reg = <0x0 0x300>; + enable-method = "psci"; + power-domains = <&CPU_PD3>; + power-domain-names = "psci"; + next-level-cache = <&L2_300>; + L2_300: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU4: cpu@400 { + device_type = "cpu"; + compatible = "qcom,kryo360"; + reg = <0x0 0x400>; + enable-method = "psci"; + power-domains = <&CPU_PD4>; + power-domain-names = "psci"; + next-level-cache = <&L2_400>; + L2_400: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU5: cpu@500 { + device_type = "cpu"; + compatible = "qcom,kryo360"; + reg = <0x0 0x500>; + enable-method = "psci"; + power-domains = <&CPU_PD5>; + power-domain-names = "psci"; + next-level-cache = <&L2_500>; + L2_500: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU6: cpu@600 { + device_type = "cpu"; + compatible = "qcom,kryo360"; + reg = <0x0 0x600>; + enable-method = "psci"; + power-domains = <&CPU_PD6>; + power-domain-names = "psci"; + next-level-cache = <&L2_600>; + L2_600: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU7: cpu@700 { + device_type = "cpu"; + compatible = "qcom,kryo360"; + reg = <0x0 0x700>; + enable-method = "psci"; + power-domains = <&CPU_PD7>; + power-domain-names = "psci"; + next-level-cache = <&L2_700>; + L2_700: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + + core1 { + cpu = <&CPU1>; + }; + + core2 { + cpu = <&CPU2>; + }; + + core3 { + cpu = <&CPU3>; + }; + + core4 { + cpu = <&CPU4>; + }; + + core5 { + cpu = <&CPU5>; + }; + + core6 { + cpu = <&CPU6>; + }; + + core7 { + cpu = <&CPU7>; + }; + }; + }; + + idle-states { + entry-method = "psci"; + + LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 { + compatible = "arm,idle-state"; + idle-state-name = "little-rail-power-collapse"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <702>; + exit-latency-us = <915>; + min-residency-us = <1617>; + local-timer-stop; + }; + + BIG_CPU_SLEEP_0: cpu-sleep-1-0 { + compatible = "arm,idle-state"; + idle-state-name = "big-rail-power-collapse"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <526>; + exit-latency-us = <1854>; + min-residency-us = <2380>; + local-timer-stop; + }; + }; + + domain-idle-states { + CLUSTER_SLEEP_0: cluster-sleep-0 { + compatible = "domain-idle-state"; + arm,psci-suspend-param = <0x4100c244>; + entry-latency-us = <3263>; + exit-latency-us = <6562>; + min-residency-us = <9825>; + }; + }; + }; + + firmware { + scm { + compatible = "qcom,scm-sdm670", "qcom,scm"; + }; + }; + + memory@80000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the size */ + reg = <0x0 0x80000000 0x0 0x0>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + + CPU_PD0: power-domain-cpu0 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD1: power-domain-cpu1 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD2: power-domain-cpu2 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD3: power-domain-cpu3 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD4: power-domain-cpu4 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD5: power-domain-cpu5 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD6: power-domain-cpu6 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD7: power-domain-cpu7 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CLUSTER_PD: power-domain-cluster { + #power-domain-cells = <0>; + domain-idle-states = <&CLUSTER_SLEEP_0>; + }; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + hyp_mem: hyp-mem@85700000 { + reg = <0 0x85700000 0 0x600000>; + no-map; + }; + + xbl_mem: xbl-mem@85e00000 { + reg = <0 0x85e00000 0 0x100000>; + no-map; + }; + + aop_mem: aop-mem@85fc0000 { + reg = <0 0x85fc0000 0 0x20000>; + no-map; + }; + + aop_cmd_db_mem: aop-cmd-db-mem@85fe0000 { + compatible = "qcom,cmd-db"; + reg = <0 0x85fe0000 0 0x20000>; + no-map; + }; + + camera_mem: camera-mem@8ab00000 { + reg = <0 0x8ab00000 0 0x500000>; + no-map; + }; + + mpss_region: mpss@8b000000 { + reg = <0 0x8b000000 0 0x7e00000>; + no-map; + }; + + venus_mem: venus@92e00000 { + reg = <0 0x92e00000 0 0x500000>; + no-map; + }; + + wlan_msa_mem: wlan-msa@93300000 { + reg = <0 0x93300000 0 0x100000>; + no-map; + }; + + cdsp_mem: cdsp@93400000 { + reg = <0 0x93400000 0 0x800000>; + no-map; + }; + + mba_region: mba@93c00000 { + reg = <0 0x93c00000 0 0x200000>; + no-map; + }; + + adsp_mem: adsp@93e00000 { + reg = <0 0x93e00000 0 0x1e00000>; + no-map; + }; + + ipa_fw_mem: ipa-fw@95c00000 { + reg = <0 0x95c00000 0 0x10000>; + no-map; + }; + + ipa_gsi_mem: ipa-gsi@95c10000 { + reg = <0 0x95c10000 0 0x5000>; + no-map; + }; + + gpu_mem: gpu@95c15000 { + reg = <0 0x95c15000 0 0x2000>; + no-map; + }; + + spss_mem: spss@97b00000 { + reg = <0 0x97b00000 0 0x100000>; + no-map; + }; + + qseecom_mem: qseecom@9e400000 { + reg = <0 0x9e400000 0 0x1400000>; + no-map; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 1 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 2 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 3 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 0 IRQ_TYPE_LEVEL_LOW>; + }; + + soc: soc@0 { + #address-cells = <2>; + #size-cells = <2>; + ranges = <0 0 0 0 0x10 0>; + dma-ranges = <0 0 0 0 0x10 0>; + compatible = "simple-bus"; + + gcc: clock-controller@100000 { + compatible = "qcom,gcc-sdm670"; + reg = <0 0x00100000 0 0x1f0000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&rpmhcc RPMH_CXO_CLK_A>, + <&sleep_clk>; + clock-names = "bi_tcxo", + "bi_tcxo_ao", + "sleep_clk"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + sdhc_1: mmc@7c4000 { + compatible = "qcom,sdm670-sdhci", "qcom,sdhci-msm-v5"; + reg = <0 0x007c4000 0 0x1000>, + <0 0x007c5000 0 0x1000>, + <0 0x007c8000 0 0x8000>; + reg-names = "hc", "cqhci", "ice"; + + interrupts = <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 644 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_SDCC1_ICE_CORE_CLK>, + <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>; + clock-names = "iface", "core", "xo", "ice", "bus"; + + iommus = <&apps_smmu 0x140 0xf>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_state_on>; + pinctrl-1 = <&sdc1_state_off>; + power-domains = <&rpmhpd SDM670_CX>; + + bus-width = <8>; + non-removable; + + status = "disabled"; + }; + + gpi_dma0: dma-controller@800000 { + #dma-cells = <3>; + compatible = "qcom,sdm670-gpi-dma", "qcom,sdm845-gpi-dma"; + reg = <0 0x00800000 0 0x60000>; + interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>; + dma-channels = <13>; + dma-channel-mask = <0xfa>; + iommus = <&apps_smmu 0x16 0x0>; + status = "disabled"; + }; + + qupv3_id_0: geniqup@8c0000 { + compatible = "qcom,geni-se-qup"; + reg = <0 0x008c0000 0 0x6000>; + clock-names = "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; + iommus = <&apps_smmu 0x3 0x0>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + i2c0: i2c@880000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00880000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c0_default>; + interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SDM670_CX>; + dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>, + <&gpi_dma0 1 0 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + i2c1: i2c@884000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00884000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c1_default>; + interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SDM670_CX>; + dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>, + <&gpi_dma0 1 1 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + i2c2: i2c@888000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00888000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c2_default>; + interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SDM670_CX>; + dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>, + <&gpi_dma0 1 2 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + i2c3: i2c@88c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x0088c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c3_default>; + interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SDM670_CX>; + dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>, + <&gpi_dma0 1 3 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + i2c4: i2c@890000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00890000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c4_default>; + interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SDM670_CX>; + dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>, + <&gpi_dma0 1 4 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + i2c5: i2c@894000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00894000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c5_default>; + interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SDM670_CX>; + dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>, + <&gpi_dma0 1 5 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + i2c6: i2c@898000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00898000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c6_default>; + interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SDM670_CX>; + dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>, + <&gpi_dma0 1 6 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + i2c7: i2c@89c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x0089c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c7_default>; + interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SDM670_CX>; + dmas = <&gpi_dma0 0 7 QCOM_GPI_I2C>, + <&gpi_dma0 1 7 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + }; + + gpi_dma1: dma-controller@a00000 { + #dma-cells = <3>; + compatible = "qcom,sdm670-gpi-dma", "qcom,sdm845-gpi-dma"; + reg = <0 0x00a00000 0 0x60000>; + interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>; + dma-channels = <13>; + dma-channel-mask = <0xfa>; + iommus = <&apps_smmu 0x6d6 0x0>; + status = "disabled"; + }; + + qupv3_id_1: geniqup@ac0000 { + compatible = "qcom,geni-se-qup"; + reg = <0 0x00ac0000 0 0x6000>; + clock-names = "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; + iommus = <&apps_smmu 0x6c3 0x0>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + i2c8: i2c@a80000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a80000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c8_default>; + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SDM670_CX>; + dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>, + <&gpi_dma1 1 0 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + i2c9: i2c@a84000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a84000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c9_default>; + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SDM670_CX>; + dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>, + <&gpi_dma1 1 1 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + i2c10: i2c@a88000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a88000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c10_default>; + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SDM670_CX>; + dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>, + <&gpi_dma1 1 2 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + i2c11: i2c@a8c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a8c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c11_default>; + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SDM670_CX>; + dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>, + <&gpi_dma1 1 3 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + i2c12: i2c@a90000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a90000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c12_default>; + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SDM670_CX>; + dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>, + <&gpi_dma1 1 4 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + i2c13: i2c@a94000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a94000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c13_default>; + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SDM670_CX>; + dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>, + <&gpi_dma1 1 5 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + i2c14: i2c@a98000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a98000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c14_default>; + interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SDM670_CX>; + dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>, + <&gpi_dma1 1 6 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + i2c15: i2c@a9c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a9c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c15_default>; + interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SDM670_CX>; + dmas = <&gpi_dma1 0 7 QCOM_GPI_I2C>, + <&gpi_dma1 1 7 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + }; + + tlmm: pinctrl@3400000 { + compatible = "qcom,sdm670-tlmm"; + reg = <0 0x03400000 0 0xc00000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&tlmm 0 0 151>; + + qup_i2c0_default: qup-i2c0-default-state { + pins = "gpio0", "gpio1"; + function = "qup0"; + }; + + qup_i2c1_default: qup-i2c1-default-state { + pins = "gpio17", "gpio18"; + function = "qup1"; + }; + + qup_i2c2_default: qup-i2c2-default-state { + pins = "gpio27", "gpio28"; + function = "qup2"; + }; + + qup_i2c3_default: qup-i2c3-default-state { + pins = "gpio41", "gpio42"; + function = "qup3"; + }; + + qup_i2c4_default: qup-i2c4-default-state { + pins = "gpio89", "gpio90"; + function = "qup4"; + }; + + qup_i2c5_default: qup-i2c5-default-state { + pins = "gpio85", "gpio86"; + function = "qup5"; + }; + + qup_i2c6_default: qup-i2c6-default-state { + pins = "gpio45", "gpio46"; + function = "qup6"; + }; + + qup_i2c7_default: qup-i2c7-default-state { + pins = "gpio93", "gpio94"; + function = "qup7"; + }; + + qup_i2c8_default: qup-i2c8-default-state { + pins = "gpio65", "gpio66"; + function = "qup8"; + }; + + qup_i2c9_default: qup-i2c9-default-state { + pins = "gpio6", "gpio7"; + function = "qup9"; + }; + + qup_i2c10_default: qup-i2c10-default-state { + pins = "gpio55", "gpio56"; + function = "qup10"; + }; + + qup_i2c11_default: qup-i2c11-default-state { + pins = "gpio31", "gpio32"; + function = "qup11"; + }; + + qup_i2c12_default: qup-i2c12-default-state { + pins = "gpio49", "gpio50"; + function = "qup12"; + }; + + qup_i2c13_default: qup-i2c13-default-state { + pins = "gpio105", "gpio106"; + function = "qup13"; + }; + + qup_i2c14_default: qup-i2c14-default-state { + pins = "gpio33", "gpio34"; + function = "qup14"; + }; + + qup_i2c15_default: qup-i2c15-default-state { + pins = "gpio81", "gpio82"; + function = "qup15"; + }; + + sdc1_state_on: sdc1-on-state { + clk-pins { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <16>; + }; + + cmd-pins { + pins = "sdc1_cmd"; + bias-pull-up; + drive-strength = <10>; + }; + + data-pins { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <10>; + }; + + rclk-pins { + pins = "sdc1_rclk"; + bias-pull-down; + }; + }; + + sdc1_state_off: sdc1-off-state { + clk-pins { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <2>; + }; + + cmd-pins { + pins = "sdc1_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + + data-pins { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <2>; + }; + + rclk-pins { + pins = "sdc1_rclk"; + bias-pull-down; + }; + }; + }; + + usb_1_hsphy: phy@88e2000 { + compatible = "qcom,sdm670-qusb2-phy", "qcom,qusb2-v2-phy"; + reg = <0 0x088e2000 0 0x400>; + #phy-cells = <0>; + + clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "cfg_ahb", "ref"; + + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + + status = "disabled"; + }; + + usb_1: usb@a6f8800 { + compatible = "qcom,sdm670-dwc3", "qcom,dwc3"; + reg = <0 0x0a6f8800 0 0x400>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + dma-ranges; + + clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_SLEEP_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi"; + + assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>; + assigned-clock-rates = <19200000>, <150000000>; + + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 488 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 489 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hs_phy_irq", "ss_phy_irq", + "dm_hs_phy_irq", "dp_hs_phy_irq"; + + power-domains = <&gcc USB30_PRIM_GDSC>; + + resets = <&gcc GCC_USB30_PRIM_BCR>; + + status = "disabled"; + + usb_1_dwc3: usb@a600000 { + compatible = "snps,dwc3"; + reg = <0 0x0a600000 0 0xcd00>; + interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&apps_smmu 0x740 0>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + phys = <&usb_1_hsphy>; + phy-names = "usb2-phy"; + }; + }; + + spmi_bus: spmi@c440000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0 0x0c440000 0 0x1100>, + <0 0x0c600000 0 0x2000000>, + <0 0x0e600000 0 0x100000>, + <0 0x0e700000 0 0xa0000>, + <0 0x0c40a000 0 0x26000>; + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; + interrupt-names = "periph_irq"; + interrupts = <GIC_SPI 481 IRQ_TYPE_LEVEL_HIGH>; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + }; + + apps_smmu: iommu@15000000 { + compatible = "qcom,sdm670-smmu-500", "qcom,smmu-500", "arm,mmu-500"; + reg = <0 0x15000000 0 0x80000>; + #iommu-cells = <2>; + #global-interrupts = <1>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>; + }; + + apps_rsc: rsc@179c0000 { + compatible = "qcom,rpmh-rsc"; + reg = <0 0x179c0000 0 0x10000>, + <0 0x179d0000 0 0x10000>, + <0 0x179e0000 0 0x10000>; + reg-names = "drv-0", "drv-1", "drv-2"; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + label = "apps_rsc"; + qcom,tcs-offset = <0xd00>; + qcom,drv-id = <2>; + qcom,tcs-config = <ACTIVE_TCS 2>, + <SLEEP_TCS 3>, + <WAKE_TCS 3>, + <CONTROL_TCS 1>; + + apps_bcm_voter: bcm-voter { + compatible = "qcom,bcm-voter"; + }; + + rpmhcc: clock-controller { + compatible = "qcom,sdm670-rpmh-clk"; + #clock-cells = <1>; + clock-names = "xo"; + clocks = <&xo_board>; + }; + + rpmhpd: power-controller { + compatible = "qcom,sdm670-rpmhpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmhpd_opp_table>; + + rpmhpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmhpd_opp_ret: opp1 { + opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>; + }; + + rpmhpd_opp_min_svs: opp2 { + opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; + }; + + rpmhpd_opp_low_svs: opp3 { + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; + }; + + rpmhpd_opp_svs: opp4 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + }; + + rpmhpd_opp_svs_l1: opp5 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; + }; + + rpmhpd_opp_nom: opp6 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM>; + }; + + rpmhpd_opp_nom_l1: opp7 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; + }; + + rpmhpd_opp_nom_l2: opp8 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>; + }; + + rpmhpd_opp_turbo: opp9 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO>; + }; + + rpmhpd_opp_turbo_l1: opp10 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>; + }; + }; + }; + }; + + intc: interrupt-controller@17a00000 { + compatible = "arm,gic-v3"; + reg = <0 0x17a00000 0 0x10000>, /* GICD */ + <0 0x17a60000 0 0x100000>; /* GICR * 8 */ + interrupt-controller; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <3>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi index b5eb8f7eca1d..ca676e04687b 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi @@ -16,7 +16,7 @@ / { aliases { bluetooth0 = &bluetooth; - hsuart0 = &uart6; + serial1 = &uart6; serial0 = &uart9; wifi0 = &wifi; }; @@ -860,6 +860,8 @@ ap_ts_i2c: &i2c14 { &uart6 { status = "okay"; + pinctrl-0 = <&qup_uart6_4pin>; + bluetooth: wcn3990-bt { compatible = "qcom,wcn3990-bt"; vddio-supply = <&src_pp1800_s4a>; @@ -1079,41 +1081,6 @@ ap_ts_i2c: &i2c14 { }; }; -&qup_uart6_default { - /* Change pinmux to all 4 pins since CTS and RTS are connected */ - pinmux { - pins = "gpio45", "gpio46", - "gpio47", "gpio48"; - }; - - pinconf-cts { - /* - * Configure a pull-down on 45 (CTS) to match the pull of - * the Bluetooth module. - */ - pins = "gpio45"; - bias-pull-down; - }; - - pinconf-rts-tx { - /* We'll drive 46 (RTS) and 47 (TX), so no pull */ - pins = "gpio46", "gpio47"; - drive-strength = <2>; - bias-disable; - }; - - pinconf-rx { - /* - * Configure a pull-up on 48 (RX). This is needed to avoid - * garbage data when the TX pin of the Bluetooth module is - * in tri-state (module powered off or not driving the - * signal yet). - */ - pins = "gpio48"; - bias-pull-up; - }; -}; - &qup_uart9_default { pinconf-tx { pins = "gpio4"; @@ -1341,7 +1308,7 @@ ap_ts_i2c: &i2c14 { }; pen_rst_l: pen-rst-l { - pinmux { + pinmux { pins = "gpio23"; function = "gpio"; }; @@ -1408,7 +1375,7 @@ ap_ts_i2c: &i2c14 { }; ts_int_l: ts-int-l { - pinmux { + pinmux { pins = "gpio125"; function = "gpio"; }; @@ -1420,7 +1387,7 @@ ap_ts_i2c: &i2c14 { }; ts_reset_l: ts-reset-l { - pinmux { + pinmux { pins = "gpio118"; function = "gpio"; }; @@ -1436,7 +1403,7 @@ ap_ts_i2c: &i2c14 { config { pins = "gpio126"; function = "gpio"; - bias-no-pull; + bias-disable; drive-strength = <2>; output-low; }; @@ -1446,7 +1413,7 @@ ap_ts_i2c: &i2c14 { config { pins = "gpio126"; function = "gpio"; - bias-no-pull; + bias-disable; drive-strength = <2>; output-high; }; diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts index 132417e2d11e..3e7ceb0861eb 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts @@ -22,7 +22,7 @@ aliases { serial0 = &uart9; - hsuart0 = &uart6; + serial1 = &uart6; }; chosen { @@ -120,9 +120,11 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - // TODO: make it possible to drive same GPIO from two clients - // gpio = <&tlmm 89 GPIO_ACTIVE_HIGH>; - // enable-active-high; + /* + * TODO: make it possible to drive same GPIO from two clients + * gpio = <&tlmm 89 GPIO_ACTIVE_HIGH>; + * enable-active-high; + */ }; pcie0_1p05v: pcie-0-1p05v-regulator { @@ -133,9 +135,11 @@ regulator-min-microvolt = <1050000>; regulator-max-microvolt = <1050000>; - // TODO: make it possible to drive same GPIO from two clients - // gpio = <&tlmm 90 GPIO_ACTIVE_HIGH>; - // enable-active-high; + /* + * TODO: make it possible to drive same GPIO from two clients + * gpio = <&tlmm 90 GPIO_ACTIVE_HIGH>; + * enable-active-high; + */ }; cam0_dvdd_1v2: reg_cam0_dvdd_1v2 { @@ -195,9 +199,11 @@ regulator-min-microvolt = <500000>; regulator-max-microvolt = <500000>; - // TODO: make it possible to drive same GPIO from two clients - // gpio = <&tlmm 89 GPIO_ACTIVE_HIGH>; - // enable-active-high; + /* + * TODO: make it possible to drive same GPIO from two clients + * gpio = <&tlmm 89 GPIO_ACTIVE_HIGH>; + * enable-active-high; + */ }; vbat: vbat-regulator { @@ -649,9 +655,13 @@ }; }; +&pmi8998_rradc { + status = "okay"; +}; + /* QUAT I2S Uses 4 I2S SD Lines for audio on LT9611 HDMI Bridge */ &q6afedai { - qi2s@22 { + dai@22 { reg = <QUATERNARY_MI2S_RX>; qcom,sd-lines = <0 1 2 3>; }; @@ -986,6 +996,8 @@ &uart6 { status = "okay"; + pinctrl-0 = <&qup_uart6_4pin>; + bluetooth { compatible = "qcom,wcn3990-bt"; @@ -1076,7 +1088,7 @@ status = "okay"; }; -&wcd9340{ +&wcd9340 { pinctrl-0 = <&wcd_intr_default>; pinctrl-names = "default"; clock-names = "extclk"; @@ -1089,7 +1101,7 @@ vdd-io-supply = <&vreg_s4a_1p8>; swm: swm@c85 { - left_spkr: wsa8810-left{ + left_spkr: speaker@0,1 { compatible = "sdw10217201000"; reg = <0 1>; powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_HIGH>; @@ -1098,7 +1110,7 @@ #sound-dai-cells = <0>; }; - right_spkr: wsa8810-right{ + right_spkr: speaker@0,2 { compatible = "sdw10217201000"; powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_HIGH>; reg = <0 2>; @@ -1123,10 +1135,13 @@ /* PINCTRL - additions to nodes defined in sdm845.dtsi */ &qup_spi2_default { - drive-strength = <16>; + pinconf { + pins = "gpio27", "gpio28", "gpio29", "gpio30"; + drive-strength = <16>; + }; }; -&qup_uart3_default{ +&qup_uart3_default { pinmux { pins = "gpio41", "gpio42", "gpio43", "gpio44"; function = "qup3"; @@ -1141,29 +1156,6 @@ }; }; -&qup_uart6_default { - pinmux { - pins = "gpio45", "gpio46", "gpio47", "gpio48"; - function = "qup6"; - }; - - cts { - pins = "gpio45"; - bias-disable; - }; - - rts-tx { - pins = "gpio46", "gpio47"; - drive-strength = <2>; - bias-disable; - }; - - rx { - pins = "gpio48"; - bias-pull-up; - }; -}; - &qup_uart9_default { pinconf-tx { pins = "gpio4"; @@ -1210,7 +1202,7 @@ compatible = "ovti,ov8856"; reg = <0x10>; - // CAM0_RST_N + /* CAM0_RST_N */ reset-gpios = <&tlmm 9 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&cam0_default>; @@ -1219,7 +1211,8 @@ clock-names = "xvclk"; clock-frequency = <19200000>; - /* The &vreg_s4a_1p8 trace is powered on as a, + /* + * The &vreg_s4a_1p8 trace is powered on as a, * so it is represented by a fixed regulator. * * The 2.8V vdda-supply and 1.2V vddd-supply regulators @@ -1247,10 +1240,10 @@ camera@60 { compatible = "ovti,ov7251"; - // I2C address as per ov7251.txt linux documentation + /* I2C address as per ov7251.txt linux documentation */ reg = <0x60>; - // CAM3_RST_N + /* CAM3_RST_N */ enable-gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&cam3_default>; @@ -1259,7 +1252,8 @@ clock-names = "xclk"; clock-frequency = <24000000>; - /* The &vreg_s4a_1p8 trace always powered on. + /* + * The &vreg_s4a_1p8 trace always powered on. * * The 2.8V vdda-supply regulator is enabled when the * vreg_s4a_1p8 trace is pulled high. @@ -1275,7 +1269,7 @@ port { ov7251_ep: endpoint { data-lanes = <0 1>; -// remote-endpoint = <&csiphy3_ep>; +/* remote-endpoint = <&csiphy3_ep>; */ }; }; }; diff --git a/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi index 20f275f8694d..1eb423e4be24 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi @@ -604,7 +604,7 @@ }; &pm8998_gpio { - vol_up_pin_a: vol-up-active-pins { + vol_up_pin_a: vol-up-active-state { pins = "gpio6"; function = "normal"; input-enable; diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi index 392461c29e76..42cf4dd5ea28 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi @@ -19,7 +19,7 @@ / { aliases { serial0 = &uart9; - hsuart0 = &uart6; + serial1 = &uart6; }; chosen { @@ -50,7 +50,8 @@ }; reserved-memory { - /* The rmtfs_mem needs to be guarded due to "XPU limitations" + /* + * The rmtfs_mem needs to be guarded due to "XPU limitations" * it is otherwise possible for an allocation adjacent to the * rmtfs_mem region to trigger an XPU violation, causing a crash. */ @@ -433,7 +434,7 @@ status = "okay"; }; -/* Modem/wifi*/ +/* Modem/wifi */ &mss_pil { status = "okay"; firmware-name = "qcom/sdm845/oneplus6/mba.mbn", "qcom/sdm845/oneplus6/modem.mbn"; @@ -461,6 +462,10 @@ }; }; +&pmi8998_rradc { + status = "okay"; +}; + &qupv3_id_1 { status = "okay"; }; @@ -500,35 +505,11 @@ }; }; -/* - * Prevent garbage data on bluetooth UART lines - */ -&qup_uart6_default { - pinmux { - pins = "gpio45", "gpio46", "gpio47", "gpio48"; - function = "qup6"; - }; - - cts { - pins = "gpio45"; - bias-pull-down; - }; - - rts-tx { - pins = "gpio46", "gpio47"; - drive-strength = <2>; - bias-disable; - }; - - rx { - pins = "gpio48"; - bias-pull-up; - }; -}; - &uart6 { status = "okay"; + pinctrl-0 = <&qup_uart6_4pin>; + bluetooth { compatible = "qcom,wcn3990-bt"; diff --git a/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts b/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts new file mode 100644 index 000000000000..e742c27fe91f --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts @@ -0,0 +1,460 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * SDM845 Samsung S9 (SM-G9600) (starqltechn / star2qltechn) common device tree source + * + * Copyright (c) 2020, The Linux Foundation. All rights reserved. + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include "sdm845.dtsi" + +/ { + chassis-type = "handset"; + model = "Samsung Galaxy S9 SM-G9600"; + compatible = "samsung,starqltechn", "qcom,sdm845"; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + framebuffer: framebuffer@9d400000 { + compatible = "simple-framebuffer"; + reg = <0 0x9d400000 0 (2960 * 1440 * 4)>;//2400000 + width = <1440>; + height = <2960>; + stride = <(1440 * 4)>; + format = "a8r8g8b8"; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + }; + + /* + * Apparently RPMh does not provide support for PM8998 S4 because it + * is always-on; model it as a fixed regulator. + */ + vreg_s4a_1p8: pm8998-smps4 { + compatible = "regulator-fixed"; + regulator-name = "vreg_s4a_1p8"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-always-on; + regulator-boot-on; + + vin-supply = <&vph_pwr>; + }; + + reserved-memory { + memory@9d400000 { + reg = <0x0 0x9d400000 0x0 0x02400000>; + no-map; + }; + + memory@a1300000 { + compatible = "ramoops"; + reg = <0x0 0xa1300000 0x0 0x100000>; + record-size = <0x40000>; + console-size = <0x40000>; + ftrace-size = <0x40000>; + pmsg-size = <0x40000>; + }; + }; +}; + + +&apps_rsc { + pm8998-rpmh-regulators { + compatible = "qcom,pm8998-rpmh-regulators"; + qcom,pmic-id = "a"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + vdd-s11-supply = <&vph_pwr>; + vdd-s12-supply = <&vph_pwr>; + vdd-s13-supply = <&vph_pwr>; + vdd-l1-l27-supply = <&vreg_s7a_1p025>; + vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>; + vdd-l3-l11-supply = <&vreg_s7a_1p025>; + vdd-l4-l5-supply = <&vreg_s7a_1p025>; + vdd-l6-supply = <&vph_pwr>; + vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>; + vdd-l26-supply = <&vreg_s3a_1p35>; + vin-lvs-1-2-supply = <&vreg_s4a_1p8>; + + vreg_s2a_1p125: smps2 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + }; + + vreg_s3a_1p35: smps3 { + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + }; + + vreg_s5a_2p04: smps5 { + regulator-min-microvolt = <1904000>; + regulator-max-microvolt = <2040000>; + }; + + vreg_s7a_1p025: smps7 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1028000>; + }; + + vdd_qusb_hs0: + vdda_hp_pcie_core: + vdda_mipi_csi0_0p9: + vdda_mipi_csi1_0p9: + vdda_mipi_csi2_0p9: + vdda_mipi_dsi0_pll: + vdda_mipi_dsi1_pll: + vdda_qlink_lv: + vdda_qlink_lv_ck: + vdda_qrefs_0p875: + vdda_pcie_core: + vdda_pll_cc_ebi01: + vdda_pll_cc_ebi23: + vdda_sp_sensor: + vdda_ufs1_core: + vdda_ufs2_core: + vdda_usb1_ss_core: + vdda_usb2_ss_core: + vreg_l1a_0p875: ldo1 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vddpx_10: + vreg_l2a_1p2: ldo2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; + }; + + vreg_l3a_1p0: ldo3 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdd_wcss_cx: + vdd_wcss_mx: + vdda_wcss_pll: + vreg_l5a_0p8: ldo5 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vddpx_13: + vreg_l6a_1p8: ldo6 { + regulator-min-microvolt = <1856000>; + regulator-max-microvolt = <1856000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7a_1p8: ldo7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8a_1p2: ldo8 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1248000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9a_1p8: ldo9 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10a_1p8: ldo10 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11a_1p0: ldo11 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1048000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdd_qfprom: + vdd_qfprom_sp: + vdda_apc1_cs_1p8: + vdda_gfx_cs_1p8: + vdda_qrefs_1p8: + vdda_qusb_hs0_1p8: + vddpx_11: + vreg_l12a_1p8: ldo12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vddpx_2: + vreg_l13a_2p95: ldo13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l14a_1p88: ldo14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l15a_1p8: ldo15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l16a_2p7: ldo16 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2704000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l17a_1p3: ldo17 { + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l18a_2p7: ldo18 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l19a_3p0: ldo19 { + regulator-min-microvolt = <2856000>; + regulator-max-microvolt = <3104000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l20a_2p95: ldo20 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l21a_2p95: ldo21 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l22a_2p85: ldo22 { + regulator-min-microvolt = <2864000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l23a_3p3: ldo23 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdda_qusb_hs0_3p1: + vreg_l24a_3p075: ldo24 { + regulator-min-microvolt = <3088000>; + regulator-max-microvolt = <3088000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l25a_3p3: ldo25 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdda_hp_pcie_1p2: + vdda_hv_ebi0: + vdda_hv_ebi1: + vdda_hv_ebi2: + vdda_hv_ebi3: + vdda_mipi_csi_1p25: + vdda_mipi_dsi0_1p2: + vdda_mipi_dsi1_1p2: + vdda_pcie_1p2: + vdda_ufs1_1p2: + vdda_ufs2_1p2: + vdda_usb1_ss_1p2: + vdda_usb2_ss_1p2: + vreg_l26a_1p2: ldo26 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l28a_3p0: ldo28 { + regulator-min-microvolt = <2856000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_lvs1a_1p8: lvs1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_lvs2a_1p8: lvs2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + }; + + pm8005-rpmh-regulators { + compatible = "qcom,pm8005-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + + vreg_s3c_0p6: smps3 { + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <600000>; + }; + }; +}; + +&gcc { + protected-clocks = <GCC_QSPI_CORE_CLK>, + <GCC_QSPI_CORE_CLK_SRC>, + <GCC_QSPI_CNOC_PERIPH_AHB_CLK>, + <GCC_LPASS_Q6_AXI_CLK>, + <GCC_LPASS_SWAY_CLK>; +}; + +&i2c10 { + clock-frequency = <400000>; + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&uart9 { + status = "okay"; +}; + +&ufs_mem_hc { + reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>; + vcc-supply = <&vreg_l20a_2p95>; + vcc-max-microamp = <600000>; + status = "okay"; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&vdda_ufs1_core>; + vdda-pll-supply = <&vdda_ufs1_1p2>; + status = "okay"; +}; + +&sdhc_2 { + pinctrl-names = "default"; + pinctrl-0 = <&sdc2_clk_state &sdc2_cmd_state &sdc2_data_state &sd_card_det_n_state>; + cd-gpios = <&tlmm 126 GPIO_ACTIVE_LOW>; + vmmc-supply = <&vreg_l21a_2p95>; + vqmmc-supply = <&vddpx_2>; + status = "okay"; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + /* Until we have Type C hooked up we'll force this as peripheral. */ + dr_mode = "peripheral"; +}; + +&usb_1_hsphy { + vdd-supply = <&vdda_usb1_ss_core>; + vdda-pll-supply = <&vdda_qusb_hs0_1p8>; + vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>; + + qcom,imp-res-offset-value = <8>; + qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>; + qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>; + qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>; + status = "okay"; +}; + +&usb_1_qmpphy { + vdda-phy-supply = <&vdda_usb1_ss_1p2>; + vdda-pll-supply = <&vdda_usb1_ss_core>; + status = "okay"; +}; + +&wifi { + vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>; + vdd-1.8-xo-supply = <&vreg_l7a_1p8>; + vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; + vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>, <27 4>, <81 4>, <85 4>; + + sdc2_clk_state: sdc2-clk-state { + pins = "sdc2_clk"; + bias-disable; + + /* + * It seems that mmc_test reports errors if drive + * strength is not 16 on clk, cmd, and data pins. + */ + drive-strength = <16>; + }; + + sdc2_cmd_state: sdc2-cmd-state { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <16>; + }; + + sdc2_data_state: sdc2-data-state { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <16>; + }; + + sd_card_det_n_state: sd-card-det-n-state { + pins = "gpio126"; + function = "gpio"; + bias-pull-up; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts b/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts index 83261c9bb4f2..bb77ccfdc68c 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts @@ -23,6 +23,7 @@ aliases { display0 = &framebuffer0; serial0 = &uart9; + serial1 = &uart6; }; chosen { @@ -693,9 +694,17 @@ &uart6 { status = "okay"; + pinctrl-0 = <&qup_uart6_4pin>; + bluetooth { compatible = "qcom,wcn3990-bt"; + /* + * This path is relative to the qca/ + * subdir under lib/firmware. + */ + firmware-name = "axolotl/crnv21.bin"; + vddio-supply = <&vreg_s4a_1p8>; vddxo-supply = <&vreg_l7a_1p8>; vddrf-supply = <&vreg_l17a_1p3>; diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi index 0f470cf1ed1c..eb6b2b676eca 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi @@ -26,8 +26,6 @@ /delete-node/ &rmtfs_mem; / { - model = "Xiaomi Pocophone F1"; - compatible = "xiaomi,beryllium", "qcom,sdm845"; chassis-type = "handset"; /* required for bootloader to select correct board */ @@ -35,7 +33,7 @@ qcom,msm-id = <321 0x20001>; aliases { - hsuart0 = &uart6; + serial1 = &uart6; }; gpio-keys { @@ -221,8 +219,7 @@ status = "okay"; vdda-supply = <&vreg_l26a_1p2>; - panel@0 { - compatible = "tianma,fhd-video"; + display_panel: panel@0 { reg = <0>; vddio-supply = <&vreg_l14a_1p8>; vddpos-supply = <&lab>; @@ -234,8 +231,10 @@ backlight = <&pmi8998_wled>; reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>; + status = "disabled"; + port { - tianma_nt36672a_in_0: endpoint { + panel_in_0: endpoint { remote-endpoint = <&dsi0_out>; }; }; @@ -243,7 +242,7 @@ }; &dsi0_out { - remote-endpoint = <&tianma_nt36672a_in_0>; + remote-endpoint = <&panel_in_0>; data-lanes = <0 1 2 3>; }; @@ -336,9 +335,13 @@ }; }; +&pmi8998_rradc { + status = "okay"; +}; + /* QUAT I2S Uses 1 I2S SD Line for audio on TAS2559/60 amplifiers */ &q6afedai { - qi2s@22 { + dai@22 { reg = <QUATERNARY_MI2S_RX>; qcom,sd-lines = <0>; }; @@ -481,6 +484,8 @@ &uart6 { status = "okay"; + pinctrl-0 = <&qup_uart6_4pin>; + bluetooth { compatible = "qcom,wcn3990-bt"; @@ -567,28 +572,3 @@ vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; vdd-3.3-ch1-supply = <&vreg_l23a_3p3>; }; - -/* PINCTRL - additions to nodes defined in sdm845.dtsi */ - -&qup_uart6_default { - pinmux { - pins = "gpio45", "gpio46", "gpio47", "gpio48"; - function = "qup6"; - }; - - cts { - pins = "gpio45"; - bias-disable; - }; - - rts-tx { - pins = "gpio46", "gpio47"; - drive-strength = <2>; - bias-disable; - }; - - rx { - pins = "gpio48"; - bias-pull-up; - }; -}; diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-ebbg.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-ebbg.dts new file mode 100644 index 000000000000..76931ebad065 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-ebbg.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: GPL-2.0 + +/dts-v1/; + +#include "sdm845-xiaomi-beryllium-common.dtsi" + +/ { + model = "Xiaomi Pocophone F1 (EBBG)"; + compatible = "xiaomi,beryllium-ebbg", "qcom,sdm845"; +}; + +&display_panel { + compatible = "ebbg,ft8719"; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-tianma.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-tianma.dts new file mode 100644 index 000000000000..8e176111e599 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-tianma.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: GPL-2.0 + +/dts-v1/; + +#include "sdm845-xiaomi-beryllium-common.dtsi" + +/ { + model = "Xiaomi Pocophone F1 (Tianma)"; + compatible = "xiaomi,beryllium", "qcom,sdm845"; +}; + +&display_panel { + compatible = "tianma,fhd-video"; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts index afc17e4d403f..38ba809a95cd 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts @@ -456,9 +456,6 @@ &i2c14 { clock-frequency = <400000>; - dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>, - <&gpi_dma1 1 6 QCOM_GPI_I2C>; - dma-names = "tx", "rx"; status = "okay"; touchscreen@20 { @@ -544,8 +541,8 @@ }; &q6afedai { - qi2s@22 { - reg = <22>; + dai@22 { + reg = <QUATERNARY_MI2S_RX>; qcom,sd-lines = <0>; }; }; @@ -628,7 +625,7 @@ }; wcd_intr_default: wcd-intr-default { - pins = "goui54"; + pins = "gpio54"; function = "gpio"; input-enable; bias-pull-down; @@ -639,6 +636,8 @@ &uart6 { status = "okay"; + pinctrl-0 = <&qup_uart6_4pin>; + bluetooth { compatible = "qcom,wcn3990-bt"; @@ -735,28 +734,3 @@ qcom,snoc-host-cap-skip-quirk; status = "okay"; }; - -/* PINCTRL - additions to nodes defined in sdm845.dtsi */ - -&qup_uart6_default { - pinmux { - pins = "gpio45", "gpio46", "gpio47", "gpio48"; - function = "qup6"; - }; - - cts { - pins = "gpio45"; - bias-disable; - }; - - rts-tx { - pins = "gpio46", "gpio47"; - drive-strength = <2>; - bias-disable; - }; - - rx { - pins = "gpio48"; - bias-pull-up; - }; -}; diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index d761da47220d..1a257f672887 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -767,13 +767,13 @@ #size-cells = <0>; qcom,intents = <512 20>; - apr-service@3 { + service@3 { reg = <APR_SVC_ADSP_CORE>; compatible = "qcom,q6core"; qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; }; - q6afe: apr-service@4 { + q6afe: service@4 { compatible = "qcom,q6afe"; reg = <APR_SVC_AFE>; qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; @@ -785,7 +785,7 @@ }; }; - q6asm: apr-service@7 { + q6asm: service@7 { compatible = "qcom,q6asm"; reg = <APR_SVC_ASM>; qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; @@ -798,7 +798,7 @@ }; }; - q6adm: apr-service@8 { + q6adm: service@8 { compatible = "qcom,q6adm"; reg = <APR_SVC_ADM>; qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; @@ -3008,6 +3008,28 @@ }; }; + qup_uart6_4pin: qup-uart6-4pin-state { + + cts-pins { + pins = "gpio45"; + function = "qup6"; + bias-pull-down; + }; + + rts-tx-pins { + pins = "gpio46", "gpio47"; + function = "qup6"; + drive-strength = <2>; + bias-disable; + }; + + rx-pins { + pins = "gpio48"; + function = "qup6"; + bias-pull-up; + }; + }; + qup_uart7_default: qup-uart7-default { pinmux { pins = "gpio95", "gpio96"; @@ -3823,33 +3845,29 @@ status = "disabled"; }; - slim: slim@171c0000 { + slim: slim-ngd@171c0000 { compatible = "qcom,slim-ngd-v2.1.0"; reg = <0 0x171c0000 0 0x2c000>; interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>; - qcom,apps-ch-pipes = <0x780000>; - qcom,ea-pc = <0x270>; - status = "okay"; - dmas = <&slimbam 3>, <&slimbam 4>, - <&slimbam 5>, <&slimbam 6>; - dma-names = "rx", "tx", "tx2", "rx2"; + dmas = <&slimbam 3>, <&slimbam 4>; + dma-names = "rx", "tx"; iommus = <&apps_smmu 0x1806 0x0>; #address-cells = <1>; #size-cells = <0>; - ngd@1 { + slim@1 { reg = <1>; #address-cells = <2>; #size-cells = <0>; - wcd9340_ifd: ifd@0{ + wcd9340_ifd: ifd@0,0 { compatible = "slim217,250"; reg = <0 0>; }; - wcd9340: codec@1{ + wcd9340: codec@1,0 { compatible = "slim217,250"; reg = <1 0>; slim-ifc-dev = <&wcd9340_ifd>; @@ -3959,9 +3977,10 @@ }; usb_1_qmpphy: phy@88e9000 { - compatible = "qcom,sdm845-qmp-usb3-phy"; + compatible = "qcom,sdm845-qmp-usb3-dp-phy"; reg = <0 0x088e9000 0 0x18c>, - <0 0x088e8000 0 0x10>; + <0 0x088e8000 0 0x38>, + <0 0x088ea000 0 0x40>; status = "disabled"; #address-cells = <2>; #size-cells = <2>; @@ -3973,11 +3992,11 @@ <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>; clock-names = "aux", "cfg_ahb", "ref", "com_aux"; - resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>, - <&gcc GCC_USB3_PHY_PRIM_BCR>; + resets = <&gcc GCC_USB3_PHY_PRIM_BCR>, + <&gcc GCC_USB3_DP_PHY_PRIM_BCR>; reset-names = "phy", "common"; - usb_1_ssphy: phy@88e9200 { + usb_1_ssphy: usb3-phy@88e9200 { reg = <0 0x088e9200 0 0x128>, <0 0x088e9400 0 0x200>, <0 0x088e9c00 0 0x218>, @@ -3990,6 +4009,16 @@ clock-names = "pipe0"; clock-output-names = "usb3_phy_pipe_clk_src"; }; + + dp_phy: dp-phy@88ea200 { + reg = <0 0x088ea200 0 0x200>, + <0 0x088ea400 0 0x200>, + <0 0x088eaa00 0 0x200>, + <0 0x088ea600 0 0x200>, + <0 0x088ea800 0 0x200>; + #clock-cells = <1>; + #phy-cells = <0>; + }; }; usb_2_qmpphy: phy@88eb000 { @@ -4483,13 +4512,20 @@ port@0 { reg = <0>; - dpu_intf1_out: endpoint { - remote-endpoint = <&dsi0_in>; + dpu_intf0_out: endpoint { + remote-endpoint = <&dp_in>; }; }; port@1 { reg = <1>; + dpu_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + + port@2 { + reg = <2>; dpu_intf2_out: endpoint { remote-endpoint = <&dsi1_in>; }; @@ -4521,6 +4557,77 @@ }; }; + mdss_dp: displayport-controller@ae90000 { + status = "disabled"; + compatible = "qcom,sdm845-dp"; + + reg = <0 0xae90000 0 0x200>, + <0 0xae90200 0 0x200>, + <0 0xae90400 0 0x600>, + <0 0xae90a00 0 0x600>, + <0 0xae91000 0 0x600>; + + interrupt-parent = <&mdss>; + interrupts = <12>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_DP_AUX_CLK>, + <&dispcc DISP_CC_MDSS_DP_LINK_CLK>, + <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>, + <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>; + clock-names = "core_iface", "core_aux", "ctrl_link", + "ctrl_link_iface", "stream_pixel"; + #clock-cells = <1>; + assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>, + <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>; + assigned-clock-parents = <&dp_phy 0>, <&dp_phy 1>; + phys = <&dp_phy>; + phy-names = "dp"; + + operating-points-v2 = <&dp_opp_table>; + power-domains = <&rpmhpd SDM845_CX>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + dp_in: endpoint { + remote-endpoint = <&dpu_intf0_out>; + }; + }; + + port@1 { + reg = <1>; + dp_out: endpoint { }; + }; + }; + + dp_opp_table: dp-opp-table { + compatible = "operating-points-v2"; + + opp-162000000 { + opp-hz = /bits/ 64 <162000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + dsi0: dsi@ae94000 { compatible = "qcom,mdss-dsi-ctrl"; reg = <0 0x0ae94000 0 0x400>; @@ -4548,7 +4655,6 @@ power-domains = <&rpmhpd SDM845_CX>; phys = <&dsi0_phy>; - phy-names = "dsi"; status = "disabled"; @@ -4574,7 +4680,7 @@ }; }; - dsi0_phy: dsi-phy@ae94400 { + dsi0_phy: phy@ae94400 { compatible = "qcom,dsi-phy-10nm"; reg = <0 0x0ae94400 0 0x200>, <0 0x0ae94600 0 0x280>, @@ -4620,7 +4726,6 @@ power-domains = <&rpmhpd SDM845_CX>; phys = <&dsi1_phy>; - phy-names = "dsi"; status = "disabled"; @@ -4646,7 +4751,7 @@ }; }; - dsi1_phy: dsi-phy@ae96400 { + dsi1_phy: phy@ae96400 { compatible = "qcom,dsi-phy-10nm"; reg = <0 0x0ae96400 0 0x200>, <0 0x0ae96600 0 0x280>, @@ -4812,8 +4917,8 @@ <&dsi0_phy 1>, <&dsi1_phy 0>, <&dsi1_phy 1>, - <0>, - <0>; + <&dp_phy 0>, + <&dp_phy 1>; clock-names = "bi_tcxo", "gcc_disp_gpll0_clk_src", "gcc_disp_gpll0_div_clk_src", diff --git a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts index be59a8ba9c1f..f32b7445f7c9 100644 --- a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts +++ b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts @@ -487,8 +487,10 @@ }; &qup_i2c12_default { - drive-strength = <2>; - bias-disable; + pinmux { + drive-strength = <2>; + bias-disable; + }; }; &qup_uart6_default { @@ -783,7 +785,7 @@ qcom,mbhc-headphone-vthreshold-microvolt = <50000>; swm: swm@c85 { - left_spkr: wsa8810-left{ + left_spkr: speaker@0,3 { compatible = "sdw10217211000"; reg = <0 3>; powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_HIGH>; @@ -792,7 +794,7 @@ #sound-dai-cells = <0>; }; - right_spkr: wsa8810-right{ + right_spkr: speaker@0,4 { compatible = "sdw10217211000"; powerdown-gpios = <&wcdgpio 2 GPIO_ACTIVE_HIGH>; reg = <0 4>; diff --git a/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts b/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts index f954fe5cb61a..daca1e0ad62a 100644 --- a/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts +++ b/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts @@ -43,7 +43,7 @@ #size-cells = <2>; ranges; - // Firmware initialized the display at 1280p instead of 1440p + /* Firmware initialized the display at 1280p instead of 1440p */ framebuffer0: framebuffer@80400000 { compatible = "simple-framebuffer"; reg = <0 0x80400000 0 (1920 * 1280 * 4)>; @@ -124,7 +124,7 @@ }; &adsp_pas { - firmware-name = "qcom/samsung/w737/qcadsp850.mbn"; + firmware-name = "qcom/sdm850/samsung/w737/qcadsp850.mbn"; status = "okay"; }; @@ -336,7 +336,7 @@ }; &cdsp_pas { - firmware-name = "qcom/samsung/w737/qccdsp850.mbn"; + firmware-name = "qcom/sdm850/samsung/w737/qccdsp850.mbn"; status = "okay"; }; @@ -385,7 +385,7 @@ &ipa { status = "okay"; memory-region = <&ipa_fw_mem>; - firmware-name = "qcom/samsung/w737/ipa_fws.elf"; + firmware-name = "qcom/sdm850/samsung/w737/ipa_fws.elf"; }; /* No idea why it causes an SError when enabled */ @@ -395,7 +395,7 @@ &mss_pil { status = "okay"; - firmware-name = "qcom/samsung/w737/qcdsp1v2850.mbn", "qcom/samsung/w737/qcdsp2850.mbn"; + firmware-name = "qcom/sdm850/samsung/w737/qcdsp1v2850.mbn", "qcom/sdm850/samsung/w737/qcdsp2850.mbn"; }; &qup_i2c10_default { @@ -415,8 +415,10 @@ }; &qup_i2c12_default { - drive-strength = <2>; - bias-disable; + pinmux { + drive-strength = <2>; + bias-disable; + }; }; &qup_uart6_default { @@ -574,7 +576,7 @@ }; pen_rst_l: pen-rst-l { - pinmux { + pinmux { pins = "gpio21"; function = "gpio"; }; @@ -696,7 +698,7 @@ &venus { status = "okay"; - firmware-name = "qcom/samsung/w737/qcvss850.mbn"; + firmware-name = "qcom/sdm850/samsung/w737/qcvss850.mbn"; }; &wcd9340{ @@ -715,7 +717,7 @@ qcom,mbhc-headphone-vthreshold-microvolt = <50000>; swm: swm@c85 { - left_spkr: wsa8810-left{ + left_spkr: speaker@0,3 { compatible = "sdw10217211000"; reg = <0 3>; powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_HIGH>; @@ -724,7 +726,7 @@ #sound-dai-cells = <0>; }; - right_spkr: wsa8810-right{ + right_spkr: speaker@0,4 { compatible = "sdw10217211000"; powerdown-gpios = <&wcdgpio 2 GPIO_ACTIVE_HIGH>; reg = <0 4>; diff --git a/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts new file mode 100644 index 000000000000..a3f1c7c41fd7 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts @@ -0,0 +1,241 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (c) 2021, Iskren Chernev <iskren.chernev@gmail.com> + */ + +/dts-v1/; + +#include "sm4250.dtsi" + +/ { + model = "OnePlus Nord N100"; + compatible = "oneplus,billie2", "qcom,sm4250"; + + /* required for bootloader to select correct board */ + qcom,msm-id = <0x1a1 0x10000 0x1bc 0x10000>; + qcom,board-id = <0x1000b 0x00>; + + aliases { + }; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + stdout-path = "framebuffer0"; + + framebuffer0: framebuffer@9d400000 { + compatible = "simple-framebuffer"; + reg = <0 0x5c000000 0 (1600 * 720 * 4)>; + width = <720>; + height = <1600>; + stride = <(720 * 4)>; + format = "a8r8g8b8"; + }; + }; +}; + +&reserved_memory { + bootloader_log_mem: memory@5fff7000 { + reg = <0x0 0x5fff7000 0x0 0x8000>; + no-map; + }; + + ramoops@cbe00000 { + compatible = "ramoops"; + reg = <0x0 0xcbe00000 0x0 0x400000>; + record-size = <0x40000>; + pmsg-size = <0x200000>; + console-size = <0x40000>; + ftrace-size = <0x40000>; + }; + + param_mem: memory@cc200000 { + reg = <0x0 0xcc200000 0x0 0x100000>; + no-map; + }; + + mtp_mem: memory@cc300000 { + reg = <0x00 0xcc300000 0x00 0xb00000>; + no-map; + }; +}; + +&rpm_requests { + regulators-0 { + compatible = "qcom,rpm-pm6125-regulators"; + + vreg_s6a: s6 { + regulator-min-microvolt = <320000>; + regulator-max-microvolt = <1456000>; + }; + + vreg_s7a: s7 { + regulator-min-microvolt = <1280000>; + regulator-max-microvolt = <2040000>; + }; + + vreg_s8a: s8 { + regulator-min-microvolt = <1064000>; + regulator-max-microvolt = <1304000>; + }; + + vreg_l1a: l1 { + regulator-min-microvolt = <952000>; + regulator-max-microvolt = <1152000>; + }; + + vreg_l4a: l4 { + regulator-min-microvolt = <488000>; + regulator-max-microvolt = <1000000>; + }; + + vreg_l5a: l5 { + regulator-min-microvolt = <1648000>; + regulator-max-microvolt = <3056000>; + }; + + vreg_l6a: l6 { + regulator-min-microvolt = <576000>; + regulator-max-microvolt = <656000>; + }; + + vreg_l7a: l7 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1304000>; + }; + + vreg_l8a: l8 { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <728000>; + }; + + vreg_l9a: l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2000000>; + }; + + vreg_l10a: l10 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <1904000>; + }; + + vreg_l11a: l11 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <1952000>; + }; + + vreg_l12a: l12 { + regulator-min-microvolt = <1624000>; + regulator-max-microvolt = <1984000>; + }; + + vreg_l13a: l13 { + regulator-min-microvolt = <1504000>; + regulator-max-microvolt = <1952000>; + }; + + vreg_l14a: l14 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <1904000>; + }; + + vreg_l15a: l15 { + regulator-min-microvolt = <2920000>; + regulator-max-microvolt = <3232000>; + }; + + vreg_l16a: l16 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <1904000>; + }; + + vreg_l17a: l17 { + regulator-min-microvolt = <1152000>; + regulator-max-microvolt = <1304000>; + }; + + vreg_l18a: l18 { + regulator-min-microvolt = <1104000>; + regulator-max-microvolt = <1304000>; + }; + + vreg_l19a: l19 { + regulator-min-microvolt = <1624000>; + regulator-max-microvolt = <3304000>; + }; + + vreg_l20a: l20 { + regulator-min-microvolt = <1624000>; + regulator-max-microvolt = <3304000>; + }; + + vreg_l21a: l21 { + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <3544000>; + }; + + vreg_l22a: l22 { + regulator-min-microvolt = <2952000>; + regulator-max-microvolt = <3304000>; + }; + + vreg_l23a: l23 { + regulator-min-microvolt = <3296000>; + regulator-max-microvolt = <3304000>; + }; + + vreg_l24a: l24 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <3544000>; + }; + }; +}; + +&sleep_clk { + clock-frequency = <32764>; +}; + +&sdhc_2 { + vmmc-supply = <&vreg_l22a>; + vqmmc-supply = <&vreg_l5a>; + + cd-gpios = <&tlmm 88 GPIO_ACTIVE_HIGH>; + + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <14 4>; +}; + +&ufs_mem_hc { + vcc-supply = <&vreg_l24a>; + vcc-max-microamp = <600000>; + vccq2-supply = <&vreg_l11a>; + vccq2-max-microamp = <600000>; + status = "okay"; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&vreg_l4a>; + vdda-pll-supply = <&vreg_l12a>; + vddp-ref-clk-supply = <&vreg_l18a>; + status = "okay"; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_hsphy { + vdd-supply = <&vreg_l4a>; + vdda-pll-supply = <&vreg_l12a>; + vdda-phy-dpdm-supply = <&vreg_l15a>; + status = "okay"; +}; + +&xo_board { + clock-frequency = <19200000>; +}; diff --git a/arch/arm64/boot/dts/qcom/sm4250.dtsi b/arch/arm64/boot/dts/qcom/sm4250.dtsi new file mode 100644 index 000000000000..c5add8f44fc0 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm4250.dtsi @@ -0,0 +1,38 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (c) 2021, Iskren Chernev <iskren.chernev@gmail.com> + */ + +#include "sm6115.dtsi" + +&CPU0 { + compatible = "qcom,kryo240"; +}; + +&CPU1 { + compatible = "qcom,kryo240"; +}; + +&CPU2 { + compatible = "qcom,kryo240"; +}; + +&CPU3 { + compatible = "qcom,kryo240"; +}; + +&CPU4 { + compatible = "qcom,kryo240"; +}; + +&CPU5 { + compatible = "qcom,kryo240"; +}; + +&CPU6 { + compatible = "qcom,kryo240"; +}; + +&CPU7 { + compatible = "qcom,kryo240"; +}; diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi new file mode 100644 index 000000000000..0340ed21be05 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi @@ -0,0 +1,854 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (c) 2021, Iskren Chernev <iskren.chernev@gmail.com> + */ + +#include <dt-bindings/clock/qcom,gcc-sm6115.h> +#include <dt-bindings/clock/qcom,rpmcc.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/power/qcom-rpmpd.h> + +/ { + interrupt-parent = <&intc>; + + #address-cells = <2>; + #size-cells = <2>; + + chosen { }; + + clocks { + xo_board: xo-board { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "qcom,kryo260"; + reg = <0x0 0x0>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + L2_0: l2-cache { + compatible = "cache"; + cache-level = <2>; + }; + }; + + CPU1: cpu@1 { + device_type = "cpu"; + compatible = "qcom,kryo260"; + reg = <0x0 0x1>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + }; + + CPU2: cpu@2 { + device_type = "cpu"; + compatible = "qcom,kryo260"; + reg = <0x0 0x2>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + }; + + CPU3: cpu@3 { + device_type = "cpu"; + compatible = "qcom,kryo260"; + reg = <0x0 0x3>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + }; + + CPU4: cpu@100 { + device_type = "cpu"; + compatible = "qcom,kryo260"; + reg = <0x0 0x100>; + enable-method = "psci"; + capacity-dmips-mhz = <1638>; + dynamic-power-coefficient = <282>; + next-level-cache = <&L2_1>; + L2_1: l2-cache { + compatible = "cache"; + cache-level = <2>; + }; + }; + + CPU5: cpu@101 { + device_type = "cpu"; + compatible = "qcom,kryo260"; + reg = <0x0 0x101>; + capacity-dmips-mhz = <1638>; + dynamic-power-coefficient = <282>; + enable-method = "psci"; + next-level-cache = <&L2_1>; + }; + + CPU6: cpu@102 { + device_type = "cpu"; + compatible = "qcom,kryo260"; + reg = <0x0 0x102>; + capacity-dmips-mhz = <1638>; + dynamic-power-coefficient = <282>; + enable-method = "psci"; + next-level-cache = <&L2_1>; + }; + + CPU7: cpu@103 { + device_type = "cpu"; + compatible = "qcom,kryo260"; + reg = <0x0 0x103>; + capacity-dmips-mhz = <1638>; + dynamic-power-coefficient = <282>; + enable-method = "psci"; + next-level-cache = <&L2_1>; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + + core1 { + cpu = <&CPU1>; + }; + + core2 { + cpu = <&CPU2>; + }; + + core3 { + cpu = <&CPU3>; + }; + }; + + cluster1 { + core0 { + cpu = <&CPU4>; + }; + + core1 { + cpu = <&CPU5>; + }; + + core2 { + cpu = <&CPU6>; + }; + + core3 { + cpu = <&CPU7>; + }; + }; + }; + }; + + firmware { + scm: scm { + compatible = "qcom,scm-sm6115", "qcom,scm"; + #reset-cells = <1>; + }; + }; + + memory@80000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the size */ + reg = <0 0x80000000 0 0>; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_PPI 6 IRQ_TYPE_LEVEL_HIGH>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + reserved_memory: reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + hyp_mem: memory@45700000 { + reg = <0x0 0x45700000 0x0 0x600000>; + no-map; + }; + + xbl_aop_mem: memory@45e00000 { + reg = <0x0 0x45e00000 0x0 0x140000>; + no-map; + }; + + sec_apps_mem: memory@45fff000 { + reg = <0x0 0x45fff000 0x0 0x1000>; + no-map; + }; + + smem_mem: memory@46000000 { + compatible = "qcom,smem"; + reg = <0x0 0x46000000 0x0 0x200000>; + no-map; + + hwlocks = <&tcsr_mutex 3>; + qcom,rpm-msg-ram = <&rpm_msg_ram>; + }; + + cdsp_sec_mem: memory@46200000 { + reg = <0x0 0x46200000 0x0 0x1e00000>; + no-map; + }; + + pil_modem_mem: memory@4ab00000 { + reg = <0x0 0x4ab00000 0x0 0x6900000>; + no-map; + }; + + pil_video_mem: memory@51400000 { + reg = <0x0 0x51400000 0x0 0x500000>; + no-map; + }; + + wlan_msa_mem: memory@51900000 { + reg = <0x0 0x51900000 0x0 0x100000>; + no-map; + }; + + pil_cdsp_mem: memory@51a00000 { + reg = <0x0 0x51a00000 0x0 0x1e00000>; + no-map; + }; + + pil_adsp_mem: memory@53800000 { + reg = <0x0 0x53800000 0x0 0x2800000>; + no-map; + }; + + pil_ipa_fw_mem: memory@56100000 { + reg = <0x0 0x56100000 0x0 0x10000>; + no-map; + }; + + pil_ipa_gsi_mem: memory@56110000 { + reg = <0x0 0x56110000 0x0 0x5000>; + no-map; + }; + + pil_gpu_mem: memory@56115000 { + reg = <0x0 0x56115000 0x0 0x2000>; + no-map; + }; + + cont_splash_memory: memory@5c000000 { + reg = <0x0 0x5c000000 0x0 0x00f00000>; + no-map; + }; + + dfps_data_memory: memory@5cf00000 { + reg = <0x0 0x5cf00000 0x0 0x0100000>; + no-map; + }; + + removed_mem: memory@60000000 { + reg = <0x0 0x60000000 0x0 0x3900000>; + no-map; + }; + }; + + rpm-glink { + compatible = "qcom,glink-rpm"; + + interrupts = <GIC_SPI 194 IRQ_TYPE_EDGE_RISING>; + qcom,rpm-msg-ram = <&rpm_msg_ram>; + mboxes = <&apcs_glb 0>; + + rpm_requests: rpm-requests { + compatible = "qcom,rpm-sm6115"; + qcom,glink-channels = "rpm_requests"; + + rpmcc: clock-controller { + compatible = "qcom,rpmcc-sm6115", "qcom,rpmcc"; + #clock-cells = <1>; + }; + + rpmpd: power-controller { + compatible = "qcom,sm6115-rpmpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmpd_opp_table>; + + rpmpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmpd_opp_min_svs: opp1 { + opp-level = <RPM_SMD_LEVEL_MIN_SVS>; + }; + + rpmpd_opp_low_svs: opp2 { + opp-level = <RPM_SMD_LEVEL_LOW_SVS>; + }; + + rpmpd_opp_svs: opp3 { + opp-level = <RPM_SMD_LEVEL_SVS>; + }; + + rpmpd_opp_svs_plus: opp4 { + opp-level = <RPM_SMD_LEVEL_SVS_PLUS>; + }; + + rpmpd_opp_nom: opp5 { + opp-level = <RPM_SMD_LEVEL_NOM>; + }; + + rpmpd_opp_nom_plus: opp6 { + opp-level = <RPM_SMD_LEVEL_NOM_PLUS>; + }; + + rpmpd_opp_turbo: opp7 { + opp-level = <RPM_SMD_LEVEL_TURBO>; + }; + + rpmpd_opp_turbo_plus: opp8 { + opp-level = <RPM_SMD_LEVEL_TURBO_NO_CPR>; + }; + }; + }; + }; + }; + + soc: soc@0 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0xffffffff>; + + tcsr_mutex: hwlock@340000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x00340000 0x20000>; + #hwlock-cells = <1>; + }; + + tlmm: pinctrl@500000 { + compatible = "qcom,sm6115-tlmm"; + reg = <0x00500000 0x400000>, <0x00900000 0x400000>, <0x00d00000 0x400000>; + reg-names = "west", "south", "east"; + interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + gpio-ranges = <&tlmm 0 0 121>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + + sdc1_state_on: sdc1-on-state { + clk-pins { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <16>; + }; + + cmd-pins { + pins = "sdc1_cmd"; + bias-pull-up; + drive-strength = <10>; + }; + + data-pins { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <10>; + }; + + rclk-pins { + pins = "sdc1_rclk"; + bias-pull-down; + }; + }; + + sdc1_state_off: sdc1-off-state { + clk-pins { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <2>; + }; + + cmd-pins { + pins = "sdc1_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + + data-pins { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <2>; + }; + + rclk-pins { + pins = "sdc1_rclk"; + bias-pull-down; + }; + }; + + sdc2_state_on: sdc2-on-state { + clk-pins { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <16>; + }; + + cmd-pins { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <10>; + }; + + data-pins { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <10>; + }; + + sd-cd-pins { + pins = "gpio88"; + function = "gpio"; + bias-pull-up; + drive-strength = <2>; + }; + }; + + sdc2_state_off: sdc2-off-state { + clk-pins { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <2>; + }; + + cmd-pins { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + + data-pins { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <2>; + }; + + sd-cd-pins { + pins = "gpio88"; + function = "gpio"; + bias-disable; + drive-strength = <2>; + }; + }; + }; + + gcc: clock-controller@1400000 { + compatible = "qcom,gcc-sm6115"; + reg = <0x01400000 0x1f0000>; + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&sleep_clk>; + clock-names = "bi_tcxo", "sleep_clk"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + usb_1_hsphy: phy@1613000 { + compatible = "qcom,sm6115-qusb2-phy"; + reg = <0x01613000 0x180>; + #phy-cells = <0>; + + clocks = <&gcc GCC_AHB2PHY_USB_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "cfg_ahb", "ref"; + + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + nvmem-cells = <&qusb2_hstx_trim>; + + status = "disabled"; + }; + + qfprom@1b40000 { + compatible = "qcom,sm6115-qfprom", "qcom,qfprom"; + reg = <0x01b40000 0x7000>; + #address-cells = <1>; + #size-cells = <1>; + + qusb2_hstx_trim: hstx-trim@25b { + reg = <0x25b 0x1>; + bits = <1 4>; + }; + }; + + spmi_bus: spmi@1c40000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0x01c40000 0x1100>, + <0x01e00000 0x2000000>, + <0x03e00000 0x100000>, + <0x03f00000 0xa0000>, + <0x01c0a000 0x26000>; + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; + interrupt-names = "periph_irq"; + interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + }; + + rpm_msg_ram: sram@45f0000 { + compatible = "qcom,rpm-msg-ram"; + reg = <0x045f0000 0x7000>; + }; + + sdhc_1: mmc@4744000 { + compatible = "qcom,sm6115-sdhci", "qcom,sdhci-msm-v5"; + reg = <0x04744000 0x1000>, <0x04745000 0x1000>, <0x04748000 0x8000>; + reg-names = "hc", "cqhci", "ice"; + + interrupts = <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>, + <&xo_board>, + <&gcc GCC_SDCC1_ICE_CORE_CLK>; + clock-names = "iface", "core", "xo", "ice"; + + pinctrl-0 = <&sdc1_state_on>; + pinctrl-1 = <&sdc1_state_off>; + pinctrl-names = "default", "sleep"; + + bus-width = <8>; + status = "disabled"; + }; + + sdhc_2: mmc@4784000 { + compatible = "qcom,sm6115-sdhci", "qcom,sdhci-msm-v5"; + reg = <0x04784000 0x1000>; + reg-names = "hc"; + + interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC2_AHB_CLK>, <&gcc GCC_SDCC2_APPS_CLK>, <&xo_board>; + clock-names = "iface", "core", "xo"; + + pinctrl-0 = <&sdc2_state_on>; + pinctrl-1 = <&sdc2_state_off>; + pinctrl-names = "default", "sleep"; + + power-domains = <&rpmpd SM6115_VDDCX>; + operating-points-v2 = <&sdhc2_opp_table>; + iommus = <&apps_smmu 0x00a0 0x0>; + resets = <&gcc GCC_SDCC2_BCR>; + + bus-width = <4>; + qcom,dll-config = <0x0007642c>; + qcom,ddr-config = <0x80040868>; + status = "disabled"; + + sdhc2_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmpd_opp_low_svs>; + }; + + opp-202000000 { + opp-hz = /bits/ 64 <202000000>; + required-opps = <&rpmpd_opp_nom>; + }; + }; + }; + + ufs_mem_hc: ufs@4804000 { + compatible = "qcom,sm6115-ufshc", "qcom,ufshc", "jedec,ufs-2.0"; + reg = <0x04804000 0x3000>, <0x04810000 0x8000>; + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + phys = <&ufs_mem_phy_lanes>; + phy-names = "ufsphy"; + lanes-per-direction = <1>; + #reset-cells = <1>; + resets = <&gcc GCC_UFS_PHY_BCR>; + reset-names = "rst"; + + power-domains = <&gcc GCC_UFS_PHY_GDSC>; + iommus = <&apps_smmu 0x100 0>; + + clocks = <&gcc GCC_UFS_PHY_AXI_CLK>, + <&gcc GCC_SYS_NOC_UFS_PHY_AXI_CLK>, + <&gcc GCC_UFS_PHY_AHB_CLK>, + <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>, + <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_ICE_CORE_CLK>; + clock-names = "core_clk", + "bus_aggr_clk", + "iface_clk", + "core_clk_unipro", + "ref_clk", + "tx_lane0_sync_clk", + "rx_lane0_sync_clk", + "ice_core_clk"; + + freq-table-hz = <50000000 200000000>, + <0 0>, + <0 0>, + <37500000 150000000>, + <75000000 300000000>, + <0 0>, + <0 0>, + <0 0>; + + status = "disabled"; + }; + + ufs_mem_phy: phy@4807000 { + compatible = "qcom,sm6115-qmp-ufs-phy"; + reg = <0x04807000 0x1c4>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clocks = <&gcc GCC_UFS_CLKREF_CLK>, <&gcc GCC_UFS_PHY_PHY_AUX_CLK>; + clock-names = "ref", "ref_aux"; + + resets = <&ufs_mem_hc 0>; + reset-names = "ufsphy"; + status = "disabled"; + + ufs_mem_phy_lanes: phy@4807400 { + reg = <0x4807400 0x098>, + <0x4807600 0x130>, + <0x4807c00 0x16c>; + #phy-cells = <0>; + }; + }; + + usb_1: usb@4ef8800 { + compatible = "qcom,sm6115-dwc3", "qcom,dwc3"; + reg = <0x04ef8800 0x400>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>, + <&gcc GCC_SYS_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_SLEEP_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB3_PRIM_CLKREF_CLK>; + clock-names = "cfg_noc", "core", "iface", "sleep", "mock_utmi", "xo"; + + assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>; + assigned-clock-rates = <19200000>, <66666667>; + + interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hs_phy_irq", "ss_phy_irq"; + + resets = <&gcc GCC_USB30_PRIM_BCR>; + power-domains = <&gcc GCC_USB30_PRIM_GDSC>; + qcom,select-utmi-as-pipe-clk; + status = "disabled"; + + usb_1_dwc3: usb@4e00000 { + compatible = "snps,dwc3"; + reg = <0x04e00000 0xcd00>; + interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>; + phys = <&usb_1_hsphy>; + phy-names = "usb2-phy"; + iommus = <&apps_smmu 0x120 0x0>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + snps,has-lpm-erratum; + snps,hird-threshold = /bits/ 8 <0x10>; + snps,usb3_lpm_capable; + maximum-speed = "high-speed"; + dr_mode = "peripheral"; + }; + }; + + apps_smmu: iommu@c600000 { + compatible = "qcom,sm6115-smmu-500", "arm,mmu-500"; + reg = <0x0c600000 0x80000>; + #iommu-cells = <2>; + #global-interrupts = <1>; + + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>; + }; + + apcs_glb: mailbox@f111000 { + compatible = "qcom,sm6115-apcs-hmss-global"; + reg = <0x0f111000 0x1000>; + + #mbox-cells = <1>; + }; + + timer@f120000 { + compatible = "arm,armv7-timer-mem"; + reg = <0x0f120000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clock-frequency = <19200000>; + + frame@f121000 { + reg = <0x0f121000 0x1000>, <0x0f122000 0x1000>; + frame-number = <0>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + }; + + frame@f123000 { + reg = <0x0f123000 0x1000>; + frame-number = <1>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@f124000 { + reg = <0x0f124000 0x1000>; + frame-number = <2>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@f125000 { + reg = <0x0f125000 0x1000>; + frame-number = <3>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@f126000 { + reg = <0x0f126000 0x1000>; + frame-number = <4>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@f127000 { + reg = <0x0f127000 0x1000>; + frame-number = <5>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@f128000 { + reg = <0x0f128000 0x1000>; + frame-number = <6>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + }; + + intc: interrupt-controller@f200000 { + compatible = "arm,gic-v3"; + reg = <0x0f200000 0x10000>, <0x0f300000 0x100000>; + #interrupt-cells = <3>; + interrupt-controller; + interrupt-parent = <&intc>; + #redistributor-regions = <1>; + redistributor-stride = <0x0 0x20000>; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 0 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts index 6a8b88cc4385..0de6c5b7f742 100644 --- a/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts +++ b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts @@ -6,9 +6,10 @@ /dts-v1/; #include "sm6125.dtsi" +#include "pm6125.dtsi" #include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> #include <dt-bindings/input/gpio-keys.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> / { /* required for bootloader to select correct board */ @@ -80,15 +81,175 @@ no-map; }; }; + + thermal-zones { + rf-pa0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pm6125_adc_tm 0>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + quiet-thermal { + polling-delay-passive = <0>; + polling-delay = <5000>; + thermal-sensors = <&pm6125_adc_tm 1>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + xo-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pm6125_adc_tm 2>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + rf-pa1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pm6125_adc_tm 3>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + }; }; &hsusb_phy1 { status = "okay"; }; +&pm6125_adc { + pinctrl-names = "default"; + pinctrl-0 = <&camera_flash_therm &emmc_ufs_therm &rf_pa1_therm>; + + rf-pa0-therm@4d { + reg = <ADC5_AMUX_THM1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + }; + + quiet-therm@4e { + reg = <ADC5_AMUX_THM2_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + }; + + camera-flash-therm@52 { + reg = <ADC5_GPIO1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + }; + + emmc-ufs-therm@54 { + reg = <ADC5_GPIO3_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + }; + + rf-pa1-therm@55 { + reg = <ADC5_GPIO4_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + }; +}; + +&pm6125_adc_tm { + status = "okay"; + + rf-pa0-therm@0 { + reg = <0>; + io-channels = <&pm6125_adc ADC5_AMUX_THM1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + quiet-therm@1 { + reg = <1>; + io-channels = <&pm6125_adc ADC5_AMUX_THM2_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + xo-therm@2 { + reg = <2>; + io-channels = <&pm6125_adc ADC5_XO_THERM_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + rf-pa1-therm@3 { + reg = <3>; + io-channels = <&pm6125_adc ADC5_GPIO4_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; +}; + +&pm6125_gpio { + camera_flash_therm: camera-flash-therm-state { + pins = "gpio3"; + function = PMIC_GPIO_FUNC_NORMAL; + bias-high-impedance; + }; + + emmc_ufs_therm: emmc-ufs-therm-state { + pins = "gpio6"; + function = PMIC_GPIO_FUNC_NORMAL; + bias-high-impedance; + }; + + rf_pa1_therm: rf-pa1-therm-state { + pins = "gpio7"; + function = PMIC_GPIO_FUNC_NORMAL; + bias-high-impedance; + }; +}; + +&pon_pwrkey { + status = "okay"; +}; + +&pon_resin { + status = "okay"; + linux,code = <KEY_VOLUMEUP>; +}; + &sdc2_off_state { sd-cd-pins { pins = "gpio98"; + function = "gpio"; drive-strength = <2>; bias-disable; }; @@ -97,6 +258,7 @@ &sdc2_on_state { sd-cd-pins { pins = "gpio98"; + function = "gpio"; drive-strength = <2>; bias-pull-up; }; diff --git a/arch/arm64/boot/dts/qcom/sm6125.dtsi b/arch/arm64/boot/dts/qcom/sm6125.dtsi index 1fe3fa3ad877..7e25a4f85594 100644 --- a/arch/arm64/boot/dts/qcom/sm6125.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6125.dtsi @@ -407,13 +407,13 @@ }; sdc2_on_state: sdc2-on-state { - clk { + clk-pins { pins = "sdc2_clk"; drive-strength = <16>; bias-disable; }; - cmd-pins-pins { + cmd-pins { pins = "sdc2_cmd"; drive-strength = <10>; bias-pull-up; @@ -458,7 +458,7 @@ sdhc_1: mmc@4744000 { compatible = "qcom,sm6125-sdhci", "qcom,sdhci-msm-v5"; reg = <0x04744000 0x1000>, <0x04745000 0x1000>; - reg-names = "hc", "core"; + reg-names = "hc", "cqhci"; interrupts = <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>; @@ -476,6 +476,8 @@ bus-width = <8>; non-removable; + supports-cqe; + status = "disabled"; }; diff --git a/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts index 36911b9a5c04..20f35623d1ef 100644 --- a/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts +++ b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts @@ -4,7 +4,10 @@ */ /dts-v1/; +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include "sm6350.dtsi" +#include "pm6350.dtsi" / { model = "Sony Xperia 10 III"; @@ -28,16 +31,350 @@ clocks = <&gcc GCC_DISP_AXI_CLK>; }; }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_state>; + + key-volume-down { + label = "volume_down"; + linux,code = <KEY_VOLUMEDOWN>; + gpios = <&pm6350_gpios 2 GPIO_ACTIVE_LOW>; + }; + }; + + touch_en_vreg: touch-en-regulator { + compatible = "regulator-fixed"; + regulator-name = "touch_en_vreg"; + gpio = <&tlmm 10 GPIO_ACTIVE_HIGH>; + enable-active-high; + + vin-supply = <&pm6350_l6>; + }; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm6350-rpmh-regulators"; + qcom,pmic-id = "a"; + + pm6350_s1: smps1 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm6350_s2: smps2 { + regulator-min-microvolt = <1503000>; + regulator-max-microvolt = <2048000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm6350_l2: ldo2 { + regulator-min-microvolt = <1503000>; + regulator-max-microvolt = <1980000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm6350_l3: ldo3 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm6350_l4: ldo4 { + regulator-min-microvolt = <352000>; + regulator-max-microvolt = <801000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm6350_l5: ldo5 { + regulator-min-microvolt = <1503000>; + regulator-max-microvolt = <1980000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm6350_l6: ldo6 { + regulator-min-microvolt = <1710000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm6350_l7: ldo7 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <1980000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm6350_l8: ldo8 { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm6350_l9: ldo9 { + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <3401000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm6350_l11: ldo11 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm6350_l12: ldo12 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <1980000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm6350_l13: ldo13 { + regulator-min-microvolt = <570000>; + regulator-max-microvolt = <650000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm6350_l14: ldo14 { + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <1900000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm6350_l15: ldo15 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1305000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm6350_l16: ldo16 { + regulator-min-microvolt = <830000>; + regulator-max-microvolt = <921000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm6350_l18: ldo18 { + regulator-min-microvolt = <788000>; + regulator-max-microvolt = <1049000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm6350_l19: ldo19 { + regulator-min-microvolt = <1080000>; + regulator-max-microvolt = <1305000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm6350_l20: ldo20 { + regulator-min-microvolt = <530000>; + regulator-max-microvolt = <801000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm6350_l21: ldo21 { + regulator-min-microvolt = <751000>; + regulator-max-microvolt = <825000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm6350_l22: ldo22 { + regulator-min-microvolt = <1080000>; + regulator-max-microvolt = <1305000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-1 { + compatible = "qcom,pm6150l-rpmh-regulators"; + qcom,pmic-id = "e"; + + pm6150l_s8: smps8 { + regulator-min-microvolt = <313000>; + regulator-max-microvolt = <1395000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm6150l_l1: ldo1 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <1980000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm6150l_l2: ldo2 { + regulator-min-microvolt = <1170000>; + regulator-max-microvolt = <1305000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm6150l_l3: ldo3 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1299000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm6150l_l4: ldo4 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm6150l_l5: ldo5 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm6150l_l6: ldo6 { + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <2950000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = + <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + + }; + + pm6150l_l7: ldo7 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm6150l_l8: ldo8 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm6150l_l9: ldo9 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = + <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + + }; + + pm6150l_l10: ldo10 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3401000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm6150l_l11: ldo11 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3401000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm6150l_bob: bob { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <5492000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + regulator-allow-bypass; + }; + }; +}; + +&gpi_dma0 { + status = "okay"; +}; + +&gpi_dma1 { + status = "okay"; +}; + +&i2c8 { + clock-frequency = <400000>; + status = "okay"; + + touchscreen@48 { + compatible = "samsung,s6sy761"; + reg = <0x48>; + interrupt-parent = <&tlmm>; + interrupts = <22 0x2008>; + vdd-supply = <&pm6350_l11>; + avdd-supply = <&touch_en_vreg>; + + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_default &ts_active>; + }; +}; + +&pm6350_gpios { + gpio_keys_state: gpio-keys-state { + key-volume-down-pins { + pins = "gpio2"; + function = PMIC_GPIO_FUNC_NORMAL; + power-source = <0>; + bias-disable; + input-enable; + }; + }; +}; + +&pm6350_resin { + linux,code = <KEY_VOLUMEUP>; + status = "okay"; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&sdc2_off_state { + sd-cd-pins { + pins = "gpio94"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; +}; + +&sdc2_on_state { + sd-cd-pins { + pins = "gpio94"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; }; &sdhc_2 { status = "okay"; + vmmc-supply = <&pm6150l_l9>; + vqmmc-supply = <&pm6150l_l6>; + cd-gpios = <&tlmm 94 GPIO_ACTIVE_HIGH>; }; &tlmm { gpio-reserved-ranges = <13 4>, <45 2>, <56 2>; + + ts_active: ts-active-state { + pins = "gpio21"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; + + ts_int_default: ts-int-default-state { + pins = "gpio22"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + input-enable; + }; }; &usb_1 { diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi index c39de7d3ace0..0f01ff4feb55 100644 --- a/arch/arm64/boot/dts/qcom/sm6350.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi @@ -485,11 +485,13 @@ interrupts = <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 644 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "hc_irq", "pwr_irq"; + iommus = <&apps_smmu 0x60 0x0>; clocks = <&gcc GCC_SDCC1_AHB_CLK>, <&gcc GCC_SDCC1_APPS_CLK>, <&rpmhcc RPMH_CXO_CLK>; clock-names = "iface", "core", "xo"; + resets = <&gcc GCC_SDCC1_BCR>; qcom,dll-config = <0x000f642c>; qcom,ddr-config = <0x80040868>; power-domains = <&rpmhpd SM6350_CX>; @@ -1063,15 +1065,21 @@ interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "hc_irq", "pwr_irq"; + iommus = <&apps_smmu 0x560 0x0>; clocks = <&gcc GCC_SDCC2_AHB_CLK>, <&gcc GCC_SDCC2_APPS_CLK>, <&rpmhcc RPMH_CXO_CLK>; clock-names = "iface", "core", "xo"; + resets = <&gcc GCC_SDCC2_BCR>; interconnects = <&aggre2_noc MASTER_SDCC_2 0 &clk_virt SLAVE_EBI_CH0 0>, <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_SDCC_2 0>; interconnect-names = "sdhc-ddr", "cpu-sdhc"; + pinctrl-0 = <&sdc2_on_state>; + pinctrl-1 = <&sdc2_off_state>; + pinctrl-names = "default", "sleep"; + qcom,dll-config = <0x0007642c>; qcom,ddr-config = <0x80040868>; power-domains = <&rpmhpd SM6350_CX>; @@ -1154,9 +1162,6 @@ <0 0x088eaa00 0 0x100>; #phy-cells = <0>; #clock-cells = <1>; - clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; - clock-names = "pipe0"; - clock-output-names = "usb3_phy_pipe_clk_src"; }; }; @@ -1314,6 +1319,46 @@ #interrupt-cells = <2>; gpio-ranges = <&tlmm 0 0 157>; + sdc2_off_state: sdc2-off-state { + clk-pins { + pins = "sdc2_clk"; + drive-strength = <2>; + bias-disable; + }; + + cmd-pins { + pins = "sdc2_cmd"; + drive-strength = <2>; + bias-pull-up; + }; + + data-pins { + pins = "sdc2_data"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + sdc2_on_state: sdc2-on-state { + clk-pins { + pins = "sdc2_clk"; + drive-strength = <16>; + bias-disable; + }; + + cmd-pins { + pins = "sdc2_cmd"; + drive-strength = <10>; + bias-pull-up; + }; + + data-pins { + pins = "sdc2_data"; + drive-strength = <10>; + bias-pull-up; + }; + }; + qup_uart9_default: qup-uart9-default-state { pins = "gpio25", "gpio26"; function = "qup13_f2"; diff --git a/arch/arm64/boot/dts/qcom/sm6375-sony-xperia-murray-pdx225.dts b/arch/arm64/boot/dts/qcom/sm6375-sony-xperia-murray-pdx225.dts new file mode 100644 index 000000000000..450d4a557df1 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm6375-sony-xperia-murray-pdx225.dts @@ -0,0 +1,86 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022, Konrad Dybcio <konrad.dybcio@somainline.org> + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include "sm6375.dtsi" +#include "pmr735a.dtsi" + +/ { + model = "Sony Xperia 10 IV"; + compatible = "sony,pdx225", "qcom,sm6375"; + chassis-type = "handset"; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + framebuffer: framebuffer@85200000 { + compatible = "simple-framebuffer"; + reg = <0 0x85200000 0 0xc00000>; + + width = <1080>; + height = <2520>; + stride = <(1080 * 4)>; + format = "a8r8g8b8"; + /* + * That's (going to be) a lot of clocks, but it's necessary due + * to unused clk cleanup & no panel driver yet + */ + clocks = <&gcc GCC_DISP_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&gcc GCC_DISP_THROTTLE_CORE_CLK>, + <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>; + }; + }; + + reserved-memory { + cont_splash_mem: memory@85200000 { + reg = <0 0x85200000 0 0xc00000>; + no-map; + }; + + ramoops@ffc40000 { + compatible = "ramoops"; + reg = <0 0xffc40000 0 0xb0000>; + record-size = <0x10000>; + console-size = <0x60000>; + ftrace-size = <0x10000>; + pmsg-size = <0x20000>; + ecc-size = <16>; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + regulator-always-on; + regulator-boot-on; + }; +}; + +&tlmm { + gpio-reserved-ranges = <13 4>; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "peripheral"; +}; + +&usb_1_hsphy { + status = "okay"; +}; + +&xo_board_clk { + clock-frequency = <19200000>; +}; diff --git a/arch/arm64/boot/dts/qcom/sm6375.dtsi b/arch/arm64/boot/dts/qcom/sm6375.dtsi new file mode 100644 index 000000000000..9b1a497e5ca7 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm6375.dtsi @@ -0,0 +1,804 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022, Konrad Dybcio <konrad.dybcio@somainline.org> + */ + +#include <dt-bindings/clock/qcom,rpmcc.h> +#include <dt-bindings/clock/qcom,sm6375-gcc.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/mailbox/qcom-ipcc.h> +#include <dt-bindings/power/qcom-rpmpd.h> + +/ { + interrupt-parent = <&intc>; + + #address-cells = <2>; + #size-cells = <2>; + + chosen { }; + + clocks { + xo_board_clk: xo-board-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + clock-frequency = <32000>; + #clock-cells = <0>; + }; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "qcom,kryo660"; + reg = <0x0 0x0>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + qcom,freq-domain = <&cpufreq_hw 0>; + power-domains = <&CPU_PD0>; + power-domain-names = "psci"; + #cooling-cells = <2>; + L2_0: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + L3_0: l3-cache { + compatible = "cache"; + }; + }; + }; + + CPU1: cpu@100 { + device_type = "cpu"; + compatible = "qcom,kryo660"; + reg = <0x0 0x100>; + enable-method = "psci"; + next-level-cache = <&L2_100>; + qcom,freq-domain = <&cpufreq_hw 0>; + power-domains = <&CPU_PD1>; + power-domain-names = "psci"; + #cooling-cells = <2>; + L2_100: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU2: cpu@200 { + device_type = "cpu"; + compatible = "qcom,kryo660"; + reg = <0x0 0x200>; + enable-method = "psci"; + next-level-cache = <&L2_200>; + qcom,freq-domain = <&cpufreq_hw 0>; + power-domains = <&CPU_PD2>; + power-domain-names = "psci"; + #cooling-cells = <2>; + L2_200: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU3: cpu@300 { + device_type = "cpu"; + compatible = "qcom,kryo660"; + reg = <0x0 0x300>; + enable-method = "psci"; + next-level-cache = <&L2_300>; + qcom,freq-domain = <&cpufreq_hw 0>; + power-domains = <&CPU_PD3>; + power-domain-names = "psci"; + #cooling-cells = <2>; + L2_300: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU4: cpu@400 { + device_type = "cpu"; + compatible = "qcom,kryo660"; + reg = <0x0 0x400>; + enable-method = "psci"; + next-level-cache = <&L2_400>; + qcom,freq-domain = <&cpufreq_hw 0>; + power-domains = <&CPU_PD4>; + power-domain-names = "psci"; + #cooling-cells = <2>; + L2_400: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU5: cpu@500 { + device_type = "cpu"; + compatible = "qcom,kryo660"; + reg = <0x0 0x500>; + enable-method = "psci"; + next-level-cache = <&L2_500>; + qcom,freq-domain = <&cpufreq_hw 0>; + power-domains = <&CPU_PD5>; + power-domain-names = "psci"; + #cooling-cells = <2>; + L2_500: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + + }; + + CPU6: cpu@600 { + device_type = "cpu"; + compatible = "qcom,kryo660"; + reg = <0x0 0x600>; + enable-method = "psci"; + next-level-cache = <&L2_600>; + qcom,freq-domain = <&cpufreq_hw 1>; + power-domains = <&CPU_PD6>; + power-domain-names = "psci"; + #cooling-cells = <2>; + L2_600: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU7: cpu@700 { + device_type = "cpu"; + compatible = "qcom,kryo660"; + reg = <0x0 0x700>; + enable-method = "psci"; + next-level-cache = <&L2_700>; + qcom,freq-domain = <&cpufreq_hw 1>; + power-domains = <&CPU_PD7>; + power-domain-names = "psci"; + #cooling-cells = <2>; + L2_700: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + + core1 { + cpu = <&CPU1>; + }; + + core2 { + cpu = <&CPU2>; + }; + + core3 { + cpu = <&CPU3>; + }; + + core4 { + cpu = <&CPU4>; + }; + + core5 { + cpu = <&CPU5>; + }; + + core6 { + cpu = <&CPU6>; + }; + + core7 { + cpu = <&CPU7>; + }; + }; + }; + + idle-states { + entry-method = "psci"; + + LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 { + compatible = "arm,idle-state"; + idle-state-name = "silver-rail-power-collapse"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <702>; + exit-latency-us = <915>; + min-residency-us = <4001>; + local-timer-stop; + }; + + BIG_CPU_SLEEP_0: cpu-sleep-1-0 { + compatible = "arm,idle-state"; + idle-state-name = "gold-rail-power-collapse"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <526>; + exit-latency-us = <1854>; + min-residency-us = <5555>; + local-timer-stop; + }; + }; + + domain-idle-states { + CLUSTER_SLEEP_0: cluster-sleep-0 { + compatible = "domain-idle-state"; + idle-state-name = "cluster-power-collapse"; + arm,psci-suspend-param = <0x41000044>; + entry-latency-us = <2752>; + exit-latency-us = <3048>; + min-residency-us = <6118>; + local-timer-stop; + }; + }; + }; + + firmware { + scm { + compatible = "qcom,scm-sm6375", "qcom,scm"; + clocks = <&rpmcc RPM_SMD_CE1_CLK>; + clock-names = "core"; + #reset-cells = <1>; + }; + }; + + memory@80000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the size */ + reg = <0x0 0x80000000 0x0 0x0>; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + + CPU_PD0: cpu0 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD1: cpu1 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD2: cpu2 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD3: cpu3 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD4: cpu4 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD5: cpu5 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD6: cpu6 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD7: cpu7 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CLUSTER_PD: cpu-cluster0 { + #power-domain-cells = <0>; + domain-idle-states = <&CLUSTER_SLEEP_0>; + }; + }; + + reserved_memory: reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + hyp_mem: hypervisor@80000000 { + reg = <0 0x80000000 0 0x600000>; + no-map; + }; + + xbl_aop_mem: xbl-aop@80700000 { + reg = <0 0x80700000 0 0x100000>; + no-map; + }; + + reserved_xbl_uefi: xbl-uefi-res@80880000 { + reg = <0 0x80880000 0 0x14000>; + no-map; + }; + + smem_mem: smem@80900000 { + compatible = "qcom,smem"; + reg = <0 0x80900000 0 0x200000>; + hwlocks = <&tcsr_mutex 3>; + no-map; + }; + + fw_mem: fw@80b00000 { + reg = <0 0x80b00000 0 0x100000>; + no-map; + }; + + cdsp_secure_heap_mem: cdsp-sec-heap@80c00000 { + reg = <0 0x80c00000 0 0x1e00000>; + no-map; + }; + + dfps_data_mem: dpfs-data@85e00000 { + reg = <0 0x85e00000 0 0x100000>; + no-map; + }; + + pil_wlan_mem: pil-wlan@86500000 { + reg = <0 0x86500000 0 0x200000>; + no-map; + }; + + pil_adsp_mem: pil-adsp@86700000 { + reg = <0 0x86700000 0 0x2000000>; + no-map; + }; + + pil_cdsp_mem: pil-cdsp@88700000 { + reg = <0 0x88700000 0 0x1e00000>; + no-map; + }; + + pil_video_mem: pil-video@8a500000 { + reg = <0 0x8a500000 0 0x500000>; + no-map; + }; + + pil_ipa_fw_mem: pil-ipa-fw@8aa00000 { + reg = <0 0x8aa00000 0 0x10000>; + no-map; + }; + + pil_ipa_gsi_mem: pil-ipa-gsi@8aa10000 { + reg = <0 0x8aa10000 0 0xa000>; + no-map; + }; + + pil_gpu_micro_code_mem: pil-gpu-ucode@8aa1a000 { + reg = <0 0x8aa1a000 0 0x2000>; + no-map; + }; + + pil_mpss_wlan_mem: pil-mpss-wlan@8b800000 { + reg = <0 0x8b800000 0 0x10000000>; + no-map; + }; + + removed_mem: removed@c0000000 { + reg = <0 0xc0000000 0 0x5100000>; + no-map; + }; + + debug_mem: debug@ffb00000 { + reg = <0 0xffb00000 0 0xc0000>; + no-map; + }; + + last_log_mem: lastlog@ffbc0000 { + reg = <0 0xffbc0000 0 0x80000>; + no-map; + }; + + cmdline_region: cmdline@ffd00000 { + reg = <0 0xffd00000 0 0x1000>; + no-map; + }; + }; + + rpm-glink { + compatible = "qcom,glink-rpm"; + interrupts-extended = <&ipcc IPCC_CLIENT_AOP + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + qcom,rpm-msg-ram = <&rpm_msg_ram>; + mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>; + + rpm_requests: rpm-requests { + compatible = "qcom,rpm-sm6375"; + qcom,glink-channels = "rpm_requests"; + + rpmcc: clock-controller { + compatible = "qcom,rpmcc-sm6375", "qcom,rpmcc"; + clocks = <&xo_board_clk>; + clock-names = "xo"; + #clock-cells = <1>; + }; + + rpmpd: power-controller { + compatible = "qcom,sm6375-rpmpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmpd_opp_table>; + + rpmpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmpd_opp_ret: opp1 { + opp-level = <RPM_SMD_LEVEL_RETENTION>; + }; + + rpmpd_opp_min_svs: opp2 { + opp-level = <RPM_SMD_LEVEL_MIN_SVS>; + }; + + rpmpd_opp_low_svs: opp3 { + opp-level = <RPM_SMD_LEVEL_LOW_SVS>; + }; + + rpmpd_opp_svs: opp4 { + opp-level = <RPM_SMD_LEVEL_SVS>; + }; + + rpmpd_opp_svs_plus: opp5 { + opp-level = <RPM_SMD_LEVEL_SVS_PLUS>; + }; + + rpmpd_opp_nom: opp6 { + opp-level = <RPM_SMD_LEVEL_NOM>; + }; + + rpmpd_opp_nom_plus: opp7 { + opp-level = <RPM_SMD_LEVEL_NOM_PLUS>; + }; + + rpmpd_opp_turbo: opp8 { + opp-level = <RPM_SMD_LEVEL_TURBO>; + }; + + rpmpd_opp_turbo_no_cpr: opp9 { + opp-level = <RPM_SMD_LEVEL_TURBO_NO_CPR>; + }; + }; + }; + }; + }; + + soc: soc@0 { + #address-cells = <2>; + #size-cells = <2>; + ranges = <0 0 0 0 0x10 0>; + dma-ranges = <0 0 0 0 0x10 0>; + compatible = "simple-bus"; + + ipcc: mailbox@208000 { + compatible = "qcom,sm6375-ipcc", "qcom,ipcc"; + reg = <0 0x00208000 0 0x1000>; + interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <3>; + #mbox-cells = <2>; + }; + + tcsr_mutex: hwlock@340000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x0 0x00340000 0x0 0x40000>; + #hwlock-cells = <1>; + }; + + tlmm: pinctrl@500000 { + compatible = "qcom,sm6375-tlmm"; + reg = <0 0x00500000 0 0x800000>; + interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>; + gpio-ranges = <&tlmm 0 0 157>; + /* TODO: Hook up MPM as wakeup-parent when it's there */ + interrupt-controller; + gpio-controller; + #interrupt-cells = <2>; + #gpio-cells = <2>; + }; + + gcc: clock-controller@1400000 { + compatible = "qcom,sm6375-gcc"; + reg = <0 0x01400000 0 0x1f0000>; + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, + <&rpmcc RPM_SMD_XO_A_CLK_SRC>, + <&sleep_clk>; + #power-domain-cells = <1>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + usb_1_hsphy: phy@162b000 { + compatible = "qcom,sm6375-usb-hs-phy", "qcom,usb-snps-hs-7nm-phy"; + reg = <0 0x0162b000 0 0x400>; + + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "ref"; + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + #phy-cells = <0>; + + status = "disabled"; + }; + + spmi_bus: spmi@1c40000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0 0x01c40000 0 0x1100>, + <0 0x01e00000 0 0x2000000>, + <0 0x03e00000 0 0x100000>, + <0 0x03f00000 0 0xa0000>, + <0 0x01c0a000 0 0x26000>; + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; + interrupt-names = "periph_irq"; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + }; + + rpm_msg_ram: sram@45f0000 { + compatible = "qcom,rpm-msg-ram"; + reg = <0 0x045f0000 0 0x7000>; + }; + + usb_1: usb@4ef8800 { + compatible = "qcom,sm6375-dwc3", "qcom,dwc3"; + reg = <0 0x04ef8800 0 0x400>; + + clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>, + <&gcc GCC_SYS_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_SLEEP_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB3_PRIM_CLKREF_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi", + "xo"; + + assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>; + assigned-clock-rates = <19200000>, <133333333>; + + interrupts = <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hs_phy_irq", + "ss_phy_irq", + "dm_hs_phy_irq", + "dp_hs_phy_irq"; + + power-domains = <&gcc USB30_PRIM_GDSC>; + + resets = <&gcc GCC_USB30_PRIM_BCR>; + + /* + * This property is there to allow USB2 to work, as + * USB3 is not implemented yet - (re)move it when + * proper support is in place. + */ + qcom,select-utmi-as-pipe-clk; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + usb_1_dwc3: usb@4e00000 { + compatible = "snps,dwc3"; + reg = <0 0x04e00000 0 0xcd00>; + interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>; + maximum-speed = "high-speed"; + phys = <&usb_1_hsphy>; + phy-names = "usb2-phy"; + iommus = <&apps_smmu 0xe0 0x0>; + + /* Yes, this impl *does* have an unfunny number of quirks.. */ + snps,hird-threshold = /bits/ 8 <0x10>; + snps,usb2-gadget-lpm-disable; + snps,dis_u2_susphy_quirk; + snps,is-utmi-l1-suspend; + snps,dis-u1-entry-quirk; + snps,dis-u2-entry-quirk; + snps,usb3_lpm_capable; + snps,has-lpm-erratum; + tx-fifo-resize; + }; + }; + + apps_smmu: iommu@c600000 { + compatible = "qcom,sm6375-smmu-500", "arm,mmu-500"; + reg = <0 0x0c600000 0 0x100000>; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; + + power-domains = <&gcc HLOS1_VOTE_MM_SNOC_MMU_TBU_RT_GDSC>, + <&gcc HLOS1_VOTE_MM_SNOC_MMU_TBU_NRT_GDSC>, + <&gcc HLOS1_VOTE_TURING_MMU_TBU0_GDSC>; + #global-interrupts = <1>; + #iommu-cells = <2>; + }; + + intc: interrupt-controller@f200000 { + compatible = "arm,gic-v3"; + reg = <0x0 0x0f200000 0x0 0x10000>, /* GICD */ + <0x0 0x0f240000 0x0 0x100000>; /* GICR * 8 */ + interrupts = <GIC_PPI 8 IRQ_TYPE_LEVEL_HIGH>; + #redistributor-regions = <1>; + #interrupt-cells = <3>; + redistributor-stride = <0 0x20000>; + interrupt-controller; + }; + + timer@f420000 { + compatible = "arm,armv7-timer-mem"; + reg = <0 0x0f420000 0 0x1000>; + ranges = <0 0 0 0x20000000>; + #address-cells = <1>; + #size-cells = <1>; + + frame@f421000 { + reg = <0x0f421000 0x1000>, <0x0f422000 0x1000>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <0>; + }; + + frame@f423000 { + reg = <0x0f243000 0x1000>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <1>; + status = "disabled"; + }; + + frame@f425000 { + reg = <0x0f425000 0x1000>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <2>; + status = "disabled"; + }; + + frame@f427000 { + reg = <0x0f427000 0x1000>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <3>; + status = "disabled"; + }; + + frame@f429000 { + reg = <0x0f429000 0x1000>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <4>; + status = "disabled"; + }; + + frame@f42b000 { + reg = <0x0f42b000 0x1000>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <5>; + status = "disabled"; + }; + + frame@f42d000 { + reg = <0x0f42d000 0x1000>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <6>; + status = "disabled"; + }; + }; + + cpufreq_hw: cpufreq@fd91000 { + compatible = "qcom,sm6375-cpufreq-epss", "qcom,cpufreq-epss"; + reg = <0 0x0fd91000 0 0x1000>, <0 0x0fd92000 0 0x1000>; + reg-names = "freq-domain0", "freq-domain1"; + + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&gcc GPLL0>; + clock-names = "xo", "alternate"; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "dcvsh-irq-0", "dcvsh-irq-1"; + #freq-domain-cells = <1>; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 0 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts index 30c94fd4fe61..1cb14051ab1b 100644 --- a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts +++ b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts @@ -279,8 +279,12 @@ vreg_l6e: ldo6 { regulator-min-microvolt = <1700000>; - regulator-max-microvolt = <3544000>; + regulator-max-microvolt = <2950000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = + <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; }; vreg_l7e: ldo7 { @@ -297,8 +301,12 @@ vreg_l9e: ldo9 { regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <3544000>; + regulator-max-microvolt = <2960000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = + <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; }; vreg_l10e: ldo10 { @@ -424,6 +432,33 @@ status = "okay"; }; +&sdc2_off_state { + sd-cd-pins { + pins = "gpio94"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; +}; + +&sdc2_on_state { + sd-cd-pins { + pins = "gpio94"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; +}; + +&sdhc_2 { + vmmc-supply = <&vreg_l9e>; + vqmmc-supply = <&vreg_l6e>; + + cd-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>; + + status = "okay"; +}; + &tlmm { gpio-reserved-ranges = <13 4>, <56 2>; }; diff --git a/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts b/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts index bb278ecac3fa..5397fba9417b 100644 --- a/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts +++ b/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts @@ -475,7 +475,7 @@ &tlmm { gpio-reserved-ranges = <126 4>; - da7280_intr_default: da7280-intr-default { + da7280_intr_default: da7280-intr-default-state { pins = "gpio42"; function = "gpio"; bias-pull-up; diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi index cef8c4f4f0ff..d1b64280ab0b 100644 --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi @@ -887,7 +887,7 @@ }; gpi_dma0: dma-controller@800000 { - compatible = "qcom,sm8150-gpi-dma"; + compatible = "qcom,sm8150-gpi-dma", "qcom,sdm845-gpi-dma"; reg = <0 0x800000 0 0x60000>; interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>, @@ -1222,7 +1222,7 @@ }; gpi_dma1: dma-controller@a00000 { - compatible = "qcom,sm8150-gpi-dma"; + compatible = "qcom,sm8150-gpi-dma", "qcom,sdm845-gpi-dma"; reg = <0 0xa00000 0 0x60000>; interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>, @@ -1471,7 +1471,7 @@ }; gpi_dma2: dma-controller@c00000 { - compatible = "qcom,sm8150-gpi-dma"; + compatible = "qcom,sm8150-gpi-dma", "qcom,sdm845-gpi-dma"; reg = <0 0xc00000 0 0x60000>; interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>, @@ -2032,11 +2032,11 @@ status = "disabled"; ufs_mem_phy_lanes: phy@1d87400 { - reg = <0 0x01d87400 0 0x108>, - <0 0x01d87600 0 0x1e0>, - <0 0x01d87c00 0 0x1dc>, - <0 0x01d87800 0 0x108>, - <0 0x01d87a00 0 0x1e0>; + reg = <0 0x01d87400 0 0x16c>, + <0 0x01d87600 0 0x200>, + <0 0x01d87c00 0 0x200>, + <0 0x01d87800 0 0x16c>, + <0 0x01d87a00 0 0x200>; #phy-cells = <0>; }; }; @@ -2276,422 +2276,302 @@ #interrupt-cells = <2>; wakeup-parent = <&pdc>; - qup_i2c0_default: qup-i2c0-default { - mux { - pins = "gpio0", "gpio1"; - function = "qup0"; - }; - - config { - pins = "gpio0", "gpio1"; - drive-strength = <0x02>; - bias-disable; - }; + qup_i2c0_default: qup-i2c0-default-state { + pins = "gpio0", "gpio1"; + function = "qup0"; + drive-strength = <0x02>; + bias-disable; }; - qup_spi0_default: qup-spi0-default { + qup_spi0_default: qup-spi0-default-state { pins = "gpio0", "gpio1", "gpio2", "gpio3"; function = "qup0"; drive-strength = <6>; bias-disable; }; - qup_i2c1_default: qup-i2c1-default { - mux { - pins = "gpio114", "gpio115"; - function = "qup1"; - }; - - config { - pins = "gpio114", "gpio115"; - drive-strength = <0x02>; - bias-disable; - }; + qup_i2c1_default: qup-i2c1-default-state { + pins = "gpio114", "gpio115"; + function = "qup1"; + drive-strength = <2>; + bias-disable; }; - qup_spi1_default: qup-spi1-default { + qup_spi1_default: qup-spi1-default-state { pins = "gpio114", "gpio115", "gpio116", "gpio117"; function = "qup1"; drive-strength = <6>; bias-disable; }; - qup_i2c2_default: qup-i2c2-default { - mux { - pins = "gpio126", "gpio127"; - function = "qup2"; - }; - - config { - pins = "gpio126", "gpio127"; - drive-strength = <0x02>; - bias-disable; - }; + qup_i2c2_default: qup-i2c2-default-state { + pins = "gpio126", "gpio127"; + function = "qup2"; + drive-strength = <2>; + bias-disable; }; - qup_spi2_default: qup-spi2-default { + qup_spi2_default: qup-spi2-default-state { pins = "gpio126", "gpio127", "gpio128", "gpio129"; function = "qup2"; drive-strength = <6>; bias-disable; }; - qup_i2c3_default: qup-i2c3-default { - mux { - pins = "gpio144", "gpio145"; - function = "qup3"; - }; - - config { - pins = "gpio144", "gpio145"; - drive-strength = <0x02>; - bias-disable; - }; + qup_i2c3_default: qup-i2c3-default-state { + pins = "gpio144", "gpio145"; + function = "qup3"; + drive-strength = <2>; + bias-disable; }; - qup_spi3_default: qup-spi3-default { + qup_spi3_default: qup-spi3-default-state { pins = "gpio144", "gpio145", "gpio146", "gpio147"; function = "qup3"; drive-strength = <6>; bias-disable; }; - qup_i2c4_default: qup-i2c4-default { - mux { - pins = "gpio51", "gpio52"; - function = "qup4"; - }; - - config { - pins = "gpio51", "gpio52"; - drive-strength = <0x02>; - bias-disable; - }; + qup_i2c4_default: qup-i2c4-default-state { + pins = "gpio51", "gpio52"; + function = "qup4"; + drive-strength = <2>; + bias-disable; }; - qup_spi4_default: qup-spi4-default { + qup_spi4_default: qup-spi4-default-state { pins = "gpio51", "gpio52", "gpio53", "gpio54"; function = "qup4"; drive-strength = <6>; bias-disable; }; - qup_i2c5_default: qup-i2c5-default { - mux { - pins = "gpio121", "gpio122"; - function = "qup5"; - }; - - config { - pins = "gpio121", "gpio122"; - drive-strength = <0x02>; - bias-disable; - }; + qup_i2c5_default: qup-i2c5-default-state { + pins = "gpio121", "gpio122"; + function = "qup5"; + drive-strength = <2>; + bias-disable; }; - qup_spi5_default: qup-spi5-default { + qup_spi5_default: qup-spi5-default-state { pins = "gpio119", "gpio120", "gpio121", "gpio122"; function = "qup5"; drive-strength = <6>; bias-disable; }; - qup_i2c6_default: qup-i2c6-default { - mux { - pins = "gpio6", "gpio7"; - function = "qup6"; - }; - - config { - pins = "gpio6", "gpio7"; - drive-strength = <0x02>; - bias-disable; - }; + qup_i2c6_default: qup-i2c6-default-state { + pins = "gpio6", "gpio7"; + function = "qup6"; + drive-strength = <2>; + bias-disable; }; - qup_spi6_default: qup-spi6_default { + qup_spi6_default: qup-spi6_default-state { pins = "gpio4", "gpio5", "gpio6", "gpio7"; function = "qup6"; drive-strength = <6>; bias-disable; }; - qup_i2c7_default: qup-i2c7-default { - mux { - pins = "gpio98", "gpio99"; - function = "qup7"; - }; - - config { - pins = "gpio98", "gpio99"; - drive-strength = <0x02>; - bias-disable; - }; + qup_i2c7_default: qup-i2c7-default-state { + pins = "gpio98", "gpio99"; + function = "qup7"; + drive-strength = <2>; + bias-disable; }; - qup_spi7_default: qup-spi7_default { + qup_spi7_default: qup-spi7_default-state { pins = "gpio98", "gpio99", "gpio100", "gpio101"; function = "qup7"; drive-strength = <6>; bias-disable; }; - qup_i2c8_default: qup-i2c8-default { - mux { - pins = "gpio88", "gpio89"; - function = "qup8"; - }; - - config { - pins = "gpio88", "gpio89"; - drive-strength = <0x02>; - bias-disable; - }; + qup_i2c8_default: qup-i2c8-default-state { + pins = "gpio88", "gpio89"; + function = "qup8"; + drive-strength = <2>; + bias-disable; }; - qup_spi8_default: qup-spi8-default { + qup_spi8_default: qup-spi8-default-state { pins = "gpio88", "gpio89", "gpio90", "gpio91"; function = "qup8"; drive-strength = <6>; bias-disable; }; - qup_i2c9_default: qup-i2c9-default { - mux { - pins = "gpio39", "gpio40"; - function = "qup9"; - }; - - config { - pins = "gpio39", "gpio40"; - drive-strength = <0x02>; - bias-disable; - }; + qup_i2c9_default: qup-i2c9-default-state { + pins = "gpio39", "gpio40"; + function = "qup9"; + drive-strength = <2>; + bias-disable; }; - qup_spi9_default: qup-spi9-default { + qup_spi9_default: qup-spi9-default-state { pins = "gpio39", "gpio40", "gpio41", "gpio42"; function = "qup9"; drive-strength = <6>; bias-disable; }; - qup_i2c10_default: qup-i2c10-default { - mux { - pins = "gpio9", "gpio10"; - function = "qup10"; - }; - - config { - pins = "gpio9", "gpio10"; - drive-strength = <0x02>; - bias-disable; - }; + qup_i2c10_default: qup-i2c10-default-state { + pins = "gpio9", "gpio10"; + function = "qup10"; + drive-strength = <2>; + bias-disable; }; - qup_spi10_default: qup-spi10-default { + qup_spi10_default: qup-spi10-default-state { pins = "gpio9", "gpio10", "gpio11", "gpio12"; function = "qup10"; drive-strength = <6>; bias-disable; }; - qup_i2c11_default: qup-i2c11-default { - mux { - pins = "gpio94", "gpio95"; - function = "qup11"; - }; - - config { - pins = "gpio94", "gpio95"; - drive-strength = <0x02>; - bias-disable; - }; + qup_i2c11_default: qup-i2c11-default-state { + pins = "gpio94", "gpio95"; + function = "qup11"; + drive-strength = <2>; + bias-disable; }; - qup_spi11_default: qup-spi11-default { + qup_spi11_default: qup-spi11-default-state { pins = "gpio92", "gpio93", "gpio94", "gpio95"; function = "qup11"; drive-strength = <6>; bias-disable; }; - qup_i2c12_default: qup-i2c12-default { - mux { - pins = "gpio83", "gpio84"; - function = "qup12"; - }; - - config { - pins = "gpio83", "gpio84"; - drive-strength = <0x02>; - bias-disable; - }; + qup_i2c12_default: qup-i2c12-default-state { + pins = "gpio83", "gpio84"; + function = "qup12"; + drive-strength = <2>; + bias-disable; }; - qup_spi12_default: qup-spi12-default { + qup_spi12_default: qup-spi12-default-state { pins = "gpio83", "gpio84", "gpio85", "gpio86"; function = "qup12"; drive-strength = <6>; bias-disable; }; - qup_i2c13_default: qup-i2c13-default { - mux { - pins = "gpio43", "gpio44"; - function = "qup13"; - }; - - config { - pins = "gpio43", "gpio44"; - drive-strength = <0x02>; - bias-disable; - }; + qup_i2c13_default: qup-i2c13-default-state { + pins = "gpio43", "gpio44"; + function = "qup13"; + drive-strength = <2>; + bias-disable; }; - qup_spi13_default: qup-spi13-default { + qup_spi13_default: qup-spi13-default-state { pins = "gpio43", "gpio44", "gpio45", "gpio46"; function = "qup13"; drive-strength = <6>; bias-disable; }; - qup_i2c14_default: qup-i2c14-default { - mux { - pins = "gpio47", "gpio48"; - function = "qup14"; - }; - - config { - pins = "gpio47", "gpio48"; - drive-strength = <0x02>; - bias-disable; - }; + qup_i2c14_default: qup-i2c14-default-state { + pins = "gpio47", "gpio48"; + function = "qup14"; + drive-strength = <2>; + bias-disable; }; - qup_spi14_default: qup-spi14-default { + qup_spi14_default: qup-spi14-default-state { pins = "gpio47", "gpio48", "gpio49", "gpio50"; function = "qup14"; drive-strength = <6>; bias-disable; }; - qup_i2c15_default: qup-i2c15-default { - mux { - pins = "gpio27", "gpio28"; - function = "qup15"; - }; - - config { - pins = "gpio27", "gpio28"; - drive-strength = <0x02>; - bias-disable; - }; + qup_i2c15_default: qup-i2c15-default-state { + pins = "gpio27", "gpio28"; + function = "qup15"; + drive-strength = <2>; + bias-disable; }; - qup_spi15_default: qup-spi15-default { + qup_spi15_default: qup-spi15-default-state { pins = "gpio27", "gpio28", "gpio29", "gpio30"; function = "qup15"; drive-strength = <6>; bias-disable; }; - qup_i2c16_default: qup-i2c16-default { - mux { - pins = "gpio86", "gpio85"; - function = "qup16"; - }; - - config { - pins = "gpio86", "gpio85"; - drive-strength = <0x02>; - bias-disable; - }; + qup_i2c16_default: qup-i2c16-default-state { + pins = "gpio86", "gpio85"; + function = "qup16"; + drive-strength = <2>; + bias-disable; }; - qup_spi16_default: qup-spi16-default { + qup_spi16_default: qup-spi16-default-state { pins = "gpio83", "gpio84", "gpio85", "gpio86"; function = "qup16"; drive-strength = <6>; bias-disable; }; - qup_i2c17_default: qup-i2c17-default { - mux { - pins = "gpio55", "gpio56"; - function = "qup17"; - }; - - config { - pins = "gpio55", "gpio56"; - drive-strength = <0x02>; - bias-disable; - }; + qup_i2c17_default: qup-i2c17-default-state { + pins = "gpio55", "gpio56"; + function = "qup17"; + drive-strength = <2>; + bias-disable; }; - qup_spi17_default: qup-spi17-default { + qup_spi17_default: qup-spi17-default-state { pins = "gpio55", "gpio56", "gpio57", "gpio58"; function = "qup17"; drive-strength = <6>; bias-disable; }; - qup_i2c18_default: qup-i2c18-default { - mux { - pins = "gpio23", "gpio24"; - function = "qup18"; - }; - - config { - pins = "gpio23", "gpio24"; - drive-strength = <0x02>; - bias-disable; - }; + qup_i2c18_default: qup-i2c18-default-state { + pins = "gpio23", "gpio24"; + function = "qup18"; + drive-strength = <2>; + bias-disable; }; - qup_spi18_default: qup-spi18-default { + qup_spi18_default: qup-spi18-default-state { pins = "gpio23", "gpio24", "gpio25", "gpio26"; function = "qup18"; drive-strength = <6>; bias-disable; }; - qup_i2c19_default: qup-i2c19-default { - mux { - pins = "gpio57", "gpio58"; - function = "qup19"; - }; - - config { - pins = "gpio57", "gpio58"; - drive-strength = <0x02>; - bias-disable; - }; + qup_i2c19_default: qup-i2c19-default-state { + pins = "gpio57", "gpio58"; + function = "qup19"; + drive-strength = <2>; + bias-disable; }; - qup_spi19_default: qup-spi19-default { + qup_spi19_default: qup-spi19-default-state { pins = "gpio55", "gpio56", "gpio57", "gpio58"; function = "qup19"; drive-strength = <6>; bias-disable; }; - pcie0_default_state: pcie0-default { - perst { + pcie0_default_state: pcie0-default-state { + perst-pins { pins = "gpio35"; function = "gpio"; drive-strength = <2>; bias-pull-down; }; - clkreq { + clkreq-pins { pins = "gpio36"; function = "pci_e0"; drive-strength = <2>; bias-pull-up; }; - wake { + wake-pins { pins = "gpio37"; function = "gpio"; drive-strength = <2>; @@ -2699,22 +2579,22 @@ }; }; - pcie1_default_state: pcie1-default { - perst { + pcie1_default_state: pcie1-default-state { + perst-pins { pins = "gpio102"; function = "gpio"; drive-strength = <2>; bias-pull-down; }; - clkreq { + clkreq-pins { pins = "gpio103"; function = "pci_e1"; drive-strength = <2>; bias-pull-up; }; - wake { + wake-pins { pins = "gpio104"; function = "gpio"; drive-strength = <2>; @@ -4010,6 +3890,7 @@ <SLEEP_TCS 3>, <WAKE_TCS 3>, <CONTROL_TCS 1>; + power-domains = <&CLUSTER_PD>; rpmhcc: clock-controller { compatible = "qcom,sm8150-rpmh-clk"; diff --git a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts index a102aa5efa32..3ed8c84e25b8 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts @@ -635,7 +635,7 @@ wcd938x: codec { compatible = "qcom,wcd9380-codec"; #sound-dai-cells = <1>; - reset-gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>; + reset-gpios = <&tlmm 32 GPIO_ACTIVE_LOW>; vdd-buck-supply = <&vreg_s4a_1p8>; vdd-rxtx-supply = <&vreg_s4a_1p8>; vdd-io-supply = <&vreg_s4a_1p8>; @@ -757,7 +757,7 @@ }; &swr0 { - left_spkr: wsa8810-right@0,3{ + left_spkr: speaker@0,3 { compatible = "sdw10217211000"; reg = <0 3>; powerdown-gpios = <&tlmm 26 GPIO_ACTIVE_HIGH>; @@ -766,7 +766,7 @@ #sound-dai-cells = <0>; }; - right_spkr: wsa8810-left@0,4{ + right_spkr: speaker@0,4 { compatible = "sdw10217211000"; reg = <0 4>; powerdown-gpios = <&tlmm 127 GPIO_ACTIVE_HIGH>; @@ -799,31 +799,19 @@ &tlmm { gpio-reserved-ranges = <28 4>, <40 4>; - wcd938x_reset_default: wcd938x_reset_default { - mux { - pins = "gpio32"; - function = "gpio"; - }; - - config { - pins = "gpio32"; - drive-strength = <16>; - output-high; - }; + wcd938x_reset_default: wcd938x-reset-default-state { + pins = "gpio32"; + function = "gpio"; + drive-strength = <16>; + output-high; }; - wcd938x_reset_sleep: wcd938x_reset_sleep { - mux { - pins = "gpio32"; - function = "gpio"; - }; - - config { - pins = "gpio32"; - drive-strength = <16>; - bias-disable; - output-low; - }; + wcd938x_reset_sleep: wcd938x-reset-sleep-state { + pins = "gpio32"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-low; }; }; diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi index 549e0a2aa9fe..4f9cf5401e2e 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi @@ -434,7 +434,16 @@ status = "okay"; clock-frequency = <400000>; - /* NXP PN553 NFC @ 28 */ + nfc@28 { + compatible = "nxp,nxp-nci-i2c"; + reg = <0x28>; + + interrupt-parent = <&tlmm>; + interrupts = <111 IRQ_TYPE_EDGE_RISING>; + + enable-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>; + firmware-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>; + }; }; &i2c2 { @@ -582,49 +591,49 @@ &tlmm { gpio-reserved-ranges = <40 4>, <52 4>; - sdc2_default_state: sdc2-default { - clk { + sdc2_default_state: sdc2-default-state { + clk-pins { pins = "sdc2_clk"; drive-strength = <16>; bias-disable; }; - cmd { + cmd-pins { pins = "sdc2_cmd"; drive-strength = <16>; bias-pull-up; }; - data { + data-pins { pins = "sdc2_data"; drive-strength = <16>; bias-pull-up; }; }; - mdm2ap_default: mdm2ap-default { + mdm2ap_default: mdm2ap-default-state { pins = "gpio1", "gpio3"; function = "gpio"; drive-strength = <8>; bias-disable; }; - ts_int_default: ts-int-default { + ts_int_default: ts-int-default-state { pins = "gpio39"; function = "gpio"; drive-strength = <2>; - bias-disabled; + bias-disable; input-enable; }; - ap2mdm_default: ap2mdm-default { + ap2mdm_default: ap2mdm-default-state { pins = "gpio56", "gpio57"; function = "gpio"; drive-strength = <16>; bias-disable; }; - sdc2_card_det_n: sd-card-det-n { + sdc2_card_det_n: sd-card-det-n-state { pins = "gpio77"; function = "gpio"; bias-pull-up; diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi index a5b62cadb129..5daaa57dd4a8 100644 --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi @@ -936,7 +936,7 @@ }; gpi_dma2: dma-controller@800000 { - compatible = "qcom,sm8250-gpi-dma"; + compatible = "qcom,sm8250-gpi-dma", "qcom,sdm845-gpi-dma"; reg = <0 0x00800000 0 0x70000>; interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>, @@ -1187,7 +1187,7 @@ }; gpi_dma0: dma-controller@900000 { - compatible = "qcom,sm8250-gpi-dma"; + compatible = "qcom,sm8250-gpi-dma", "qcom,sdm845-gpi-dma"; reg = <0 0x00900000 0 0x70000>; interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>, @@ -1505,7 +1505,7 @@ }; gpi_dma1: dma-controller@a00000 { - compatible = "qcom,sm8250-gpi-dma"; + compatible = "qcom,sm8250-gpi-dma", "qcom,sdm845-gpi-dma"; reg = <0 0x00a00000 0 0x70000>; interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>, @@ -2179,11 +2179,11 @@ status = "disabled"; ufs_mem_phy_lanes: phy@1d87400 { - reg = <0 0x01d87400 0 0x108>, - <0 0x01d87600 0 0x1e0>, - <0 0x01d87c00 0 0x1dc>, - <0 0x01d87800 0 0x108>, - <0 0x01d87a00 0 0x1e0>; + reg = <0 0x01d87400 0 0x16c>, + <0 0x01d87600 0 0x200>, + <0 0x01d87c00 0 0x200>, + <0 0x01d87800 0 0x16c>, + <0 0x01d87a00 0 0x200>; #phy-cells = <0>; }; }; @@ -2360,7 +2360,6 @@ qcom,ports-word-length = /bits/ 8 <0xFF 0xFF 0xFF 0xFF 0xFF>; qcom,ports-block-group-count = /bits/ 8 <0xFF 0xFF 0xFF 0xFF 0xFF>; qcom,ports-lane-control = /bits/ 8 <0xFF 0x00 0x01 0x00 0x01>; - qcom,port-offset = <1>; #sound-dai-cells = <1>; #address-cells = <2>; #size-cells = <0>; @@ -2388,8 +2387,8 @@ <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>; clock-names = "core", "audio"; - wsa_swr_active: wsa-swr-active-pins { - clk { + wsa_swr_active: wsa-swr-active-state { + clk-pins { pins = "gpio10"; function = "wsa_swr_clk"; drive-strength = <2>; @@ -2397,7 +2396,7 @@ bias-disable; }; - data { + data-pins { pins = "gpio11"; function = "wsa_swr_data"; drive-strength = <2>; @@ -2407,8 +2406,8 @@ }; }; - wsa_swr_sleep: wsa-swr-sleep-pins { - clk { + wsa_swr_sleep: wsa-swr-sleep-state { + clk-pins { pins = "gpio10"; function = "wsa_swr_clk"; drive-strength = <2>; @@ -2416,7 +2415,7 @@ bias-pull-down; }; - data { + data-pins { pins = "gpio11"; function = "wsa_swr_data"; drive-strength = <2>; @@ -2426,14 +2425,14 @@ }; }; - dmic01_active: dmic01-active-pins { - clk { + dmic01_active: dmic01-active-state { + clk-pins { pins = "gpio6"; function = "dmic1_clk"; drive-strength = <8>; output-high; }; - data { + data-pins { pins = "gpio7"; function = "dmic1_data"; drive-strength = <8>; @@ -2441,8 +2440,8 @@ }; }; - dmic01_sleep: dmic01-sleep-pins { - clk { + dmic01_sleep: dmic01-sleep-state { + clk-pins { pins = "gpio6"; function = "dmic1_clk"; drive-strength = <2>; @@ -2450,17 +2449,17 @@ output-low; }; - data { + data-pins { pins = "gpio7"; function = "dmic1_data"; drive-strength = <2>; - pull-down; + bias-pull-down; input-enable; }; }; - rx_swr_active: rx_swr-active-pins { - clk { + rx_swr_active: rx-swr-active-state { + clk-pins { pins = "gpio3"; function = "swr_rx_clk"; drive-strength = <2>; @@ -2468,7 +2467,7 @@ bias-disable; }; - data { + data-pins { pins = "gpio4", "gpio5"; function = "swr_rx_data"; drive-strength = <2>; @@ -2477,8 +2476,8 @@ }; }; - tx_swr_active: tx_swr-active-pins { - clk { + tx_swr_active: tx-swr-active-state { + clk-pins { pins = "gpio0"; function = "swr_tx_clk"; drive-strength = <2>; @@ -2486,7 +2485,7 @@ bias-disable; }; - data { + data-pins { pins = "gpio1", "gpio2"; function = "swr_tx_data"; drive-strength = <2>; @@ -2495,8 +2494,8 @@ }; }; - tx_swr_sleep: tx_swr-sleep-pins { - clk { + tx_swr_sleep: tx-swr-sleep-state { + clk-pins { pins = "gpio0"; function = "swr_tx_clk"; drive-strength = <2>; @@ -2504,7 +2503,7 @@ bias-pull-down; }; - data1 { + data1-pins { pins = "gpio1"; function = "swr_tx_data"; drive-strength = <2>; @@ -2512,7 +2511,7 @@ bias-bus-hold; }; - data2 { + data2-pins { pins = "gpio2"; function = "swr_tx_data"; drive-strength = <2>; @@ -2897,9 +2896,6 @@ <0 0x088eaa00 0 0x100>; #phy-cells = <0>; #clock-cells = <1>; - clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; - clock-names = "pipe0"; - clock-output-names = "usb3_phy_pipe_clk_src"; }; }; @@ -3555,7 +3551,6 @@ power-domains = <&rpmhpd SM8250_MMCX>; phys = <&dsi0_phy>; - phy-names = "dsi"; status = "disabled"; @@ -3600,7 +3595,7 @@ }; }; - dsi0_phy: dsi-phy@ae94400 { + dsi0_phy: phy@ae94400 { compatible = "qcom,dsi-phy-7nm"; reg = <0 0x0ae94400 0 0x200>, <0 0x0ae94600 0 0x280>, @@ -3647,7 +3642,6 @@ power-domains = <&rpmhpd SM8250_MMCX>; phys = <&dsi1_phy>; - phy-names = "dsi"; status = "disabled"; @@ -3673,7 +3667,7 @@ }; }; - dsi1_phy: dsi-phy@ae96400 { + dsi1_phy: phy@ae96400 { compatible = "qcom,dsi-phy-7nm"; reg = <0 0x0ae96400 0 0x200>, <0 0x0ae96600 0 0x280>, @@ -3798,8 +3792,8 @@ gpio-ranges = <&tlmm 0 0 181>; wakeup-parent = <&pdc>; - cci0_default: cci0-default { - cci0_i2c0_default: cci0-i2c0-default { + cci0_default: cci0-default-state { + cci0_i2c0_default: cci0-i2c0-default-pins { /* SDA, SCL */ pins = "gpio101", "gpio102"; function = "cci_i2c"; @@ -3808,7 +3802,7 @@ drive-strength = <2>; /* 2 mA */ }; - cci0_i2c1_default: cci0-i2c1-default { + cci0_i2c1_default: cci0-i2c1-default-pins { /* SDA, SCL */ pins = "gpio103", "gpio104"; function = "cci_i2c"; @@ -3818,8 +3812,8 @@ }; }; - cci0_sleep: cci0-sleep { - cci0_i2c0_sleep: cci0-i2c0-sleep { + cci0_sleep: cci0-sleep-state { + cci0_i2c0_sleep: cci0-i2c0-sleep-pins { /* SDA, SCL */ pins = "gpio101", "gpio102"; function = "cci_i2c"; @@ -3828,7 +3822,7 @@ bias-pull-down; }; - cci0_i2c1_sleep: cci0-i2c1-sleep { + cci0_i2c1_sleep: cci0-i2c1-sleep-pins { /* SDA, SCL */ pins = "gpio103", "gpio104"; function = "cci_i2c"; @@ -3838,8 +3832,8 @@ }; }; - cci1_default: cci1-default { - cci1_i2c0_default: cci1-i2c0-default { + cci1_default: cci1-default-state { + cci1_i2c0_default: cci1-i2c0-default-pins { /* SDA, SCL */ pins = "gpio105","gpio106"; function = "cci_i2c"; @@ -3848,7 +3842,7 @@ drive-strength = <2>; /* 2 mA */ }; - cci1_i2c1_default: cci1-i2c1-default { + cci1_i2c1_default: cci1-i2c1-default-pins { /* SDA, SCL */ pins = "gpio107","gpio108"; function = "cci_i2c"; @@ -3858,8 +3852,8 @@ }; }; - cci1_sleep: cci1-sleep { - cci1_i2c0_sleep: cci1-i2c0-sleep { + cci1_sleep: cci1-sleep-state { + cci1_i2c0_sleep: cci1-i2c0-sleep-pins { /* SDA, SCL */ pins = "gpio105","gpio106"; function = "cci_i2c"; @@ -3868,7 +3862,7 @@ drive-strength = <2>; /* 2 mA */ }; - cci1_i2c1_sleep: cci1-i2c1-sleep { + cci1_i2c1_sleep: cci1-i2c1-sleep-pins { /* SDA, SCL */ pins = "gpio107","gpio108"; function = "cci_i2c"; @@ -3878,22 +3872,22 @@ }; }; - pri_mi2s_active: pri-mi2s-active { - sclk { + pri_mi2s_active: pri-mi2s-active-state { + sclk-pins { pins = "gpio138"; function = "mi2s0_sck"; drive-strength = <8>; bias-disable; }; - ws { + ws-pins { pins = "gpio141"; function = "mi2s0_ws"; drive-strength = <8>; output-high; }; - data0 { + data0-pins { pins = "gpio139"; function = "mi2s0_data0"; drive-strength = <8>; @@ -3901,7 +3895,7 @@ output-high; }; - data1 { + data1-pins { pins = "gpio140"; function = "mi2s0_data1"; drive-strength = <8>; @@ -3909,632 +3903,500 @@ }; }; - qup_i2c0_default: qup-i2c0-default { - mux { - pins = "gpio28", "gpio29"; - function = "qup0"; - }; - - config { - pins = "gpio28", "gpio29"; - drive-strength = <2>; - bias-disable; - }; + qup_i2c0_default: qup-i2c0-default-state { + pins = "gpio28", "gpio29"; + function = "qup0"; + drive-strength = <2>; + bias-disable; }; - qup_i2c1_default: qup-i2c1-default { - pinmux { - pins = "gpio4", "gpio5"; - function = "qup1"; - }; - - config { - pins = "gpio4", "gpio5"; - drive-strength = <2>; - bias-disable; - }; + qup_i2c1_default: qup-i2c1-default-state { + pins = "gpio4", "gpio5"; + function = "qup1"; + drive-strength = <2>; + bias-disable; }; - qup_i2c2_default: qup-i2c2-default { - mux { - pins = "gpio115", "gpio116"; - function = "qup2"; - }; - - config { - pins = "gpio115", "gpio116"; - drive-strength = <2>; - bias-disable; - }; + qup_i2c2_default: qup-i2c2-default-state { + pins = "gpio115", "gpio116"; + function = "qup2"; + drive-strength = <2>; + bias-disable; }; - qup_i2c3_default: qup-i2c3-default { - mux { - pins = "gpio119", "gpio120"; - function = "qup3"; - }; - - config { - pins = "gpio119", "gpio120"; - drive-strength = <2>; - bias-disable; - }; + qup_i2c3_default: qup-i2c3-default-state { + pins = "gpio119", "gpio120"; + function = "qup3"; + drive-strength = <2>; + bias-disable; }; - qup_i2c4_default: qup-i2c4-default { - mux { - pins = "gpio8", "gpio9"; - function = "qup4"; - }; - - config { - pins = "gpio8", "gpio9"; - drive-strength = <2>; - bias-disable; - }; + qup_i2c4_default: qup-i2c4-default-state { + pins = "gpio8", "gpio9"; + function = "qup4"; + drive-strength = <2>; + bias-disable; }; - qup_i2c5_default: qup-i2c5-default { - mux { - pins = "gpio12", "gpio13"; - function = "qup5"; - }; - - config { - pins = "gpio12", "gpio13"; - drive-strength = <2>; - bias-disable; - }; + qup_i2c5_default: qup-i2c5-default-state { + pins = "gpio12", "gpio13"; + function = "qup5"; + drive-strength = <2>; + bias-disable; }; - qup_i2c6_default: qup-i2c6-default { - mux { - pins = "gpio16", "gpio17"; - function = "qup6"; - }; - - config { - pins = "gpio16", "gpio17"; - drive-strength = <2>; - bias-disable; - }; + qup_i2c6_default: qup-i2c6-default-state { + pins = "gpio16", "gpio17"; + function = "qup6"; + drive-strength = <2>; + bias-disable; }; - qup_i2c7_default: qup-i2c7-default { - mux { - pins = "gpio20", "gpio21"; - function = "qup7"; - }; - - config { - pins = "gpio20", "gpio21"; - drive-strength = <2>; - bias-disable; - }; + qup_i2c7_default: qup-i2c7-default-state { + pins = "gpio20", "gpio21"; + function = "qup7"; + drive-strength = <2>; + bias-disable; }; - qup_i2c8_default: qup-i2c8-default { - mux { - pins = "gpio24", "gpio25"; - function = "qup8"; - }; - - config { - pins = "gpio24", "gpio25"; - drive-strength = <2>; - bias-disable; - }; + qup_i2c8_default: qup-i2c8-default-state { + pins = "gpio24", "gpio25"; + function = "qup8"; + drive-strength = <2>; + bias-disable; }; - qup_i2c9_default: qup-i2c9-default { - mux { - pins = "gpio125", "gpio126"; - function = "qup9"; - }; - - config { - pins = "gpio125", "gpio126"; - drive-strength = <2>; - bias-disable; - }; + qup_i2c9_default: qup-i2c9-default-state { + pins = "gpio125", "gpio126"; + function = "qup9"; + drive-strength = <2>; + bias-disable; }; - qup_i2c10_default: qup-i2c10-default { - mux { - pins = "gpio129", "gpio130"; - function = "qup10"; - }; - - config { - pins = "gpio129", "gpio130"; - drive-strength = <2>; - bias-disable; - }; + qup_i2c10_default: qup-i2c10-default-state { + pins = "gpio129", "gpio130"; + function = "qup10"; + drive-strength = <2>; + bias-disable; }; - qup_i2c11_default: qup-i2c11-default { - mux { - pins = "gpio60", "gpio61"; - function = "qup11"; - }; - - config { - pins = "gpio60", "gpio61"; - drive-strength = <2>; - bias-disable; - }; + qup_i2c11_default: qup-i2c11-default-state { + pins = "gpio60", "gpio61"; + function = "qup11"; + drive-strength = <2>; + bias-disable; }; - qup_i2c12_default: qup-i2c12-default { - mux { - pins = "gpio32", "gpio33"; - function = "qup12"; - }; - - config { - pins = "gpio32", "gpio33"; - drive-strength = <2>; - bias-disable; - }; + qup_i2c12_default: qup-i2c12-default-state { + pins = "gpio32", "gpio33"; + function = "qup12"; + drive-strength = <2>; + bias-disable; }; - qup_i2c13_default: qup-i2c13-default { - mux { - pins = "gpio36", "gpio37"; - function = "qup13"; - }; - - config { - pins = "gpio36", "gpio37"; - drive-strength = <2>; - bias-disable; - }; + qup_i2c13_default: qup-i2c13-default-state { + pins = "gpio36", "gpio37"; + function = "qup13"; + drive-strength = <2>; + bias-disable; }; - qup_i2c14_default: qup-i2c14-default { - mux { - pins = "gpio40", "gpio41"; - function = "qup14"; - }; - - config { - pins = "gpio40", "gpio41"; - drive-strength = <2>; - bias-disable; - }; + qup_i2c14_default: qup-i2c14-default-state { + pins = "gpio40", "gpio41"; + function = "qup14"; + drive-strength = <2>; + bias-disable; }; - qup_i2c15_default: qup-i2c15-default { - mux { - pins = "gpio44", "gpio45"; - function = "qup15"; - }; - - config { - pins = "gpio44", "gpio45"; - drive-strength = <2>; - bias-disable; - }; + qup_i2c15_default: qup-i2c15-default-state { + pins = "gpio44", "gpio45"; + function = "qup15"; + drive-strength = <2>; + bias-disable; }; - qup_i2c16_default: qup-i2c16-default { - mux { - pins = "gpio48", "gpio49"; - function = "qup16"; - }; - - config { - pins = "gpio48", "gpio49"; - drive-strength = <2>; - bias-disable; - }; + qup_i2c16_default: qup-i2c16-default-state { + pins = "gpio48", "gpio49"; + function = "qup16"; + drive-strength = <2>; + bias-disable; }; - qup_i2c17_default: qup-i2c17-default { - mux { - pins = "gpio52", "gpio53"; - function = "qup17"; - }; - - config { - pins = "gpio52", "gpio53"; - drive-strength = <2>; - bias-disable; - }; + qup_i2c17_default: qup-i2c17-default-state { + pins = "gpio52", "gpio53"; + function = "qup17"; + drive-strength = <2>; + bias-disable; }; - qup_i2c18_default: qup-i2c18-default { - mux { - pins = "gpio56", "gpio57"; - function = "qup18"; - }; - - config { - pins = "gpio56", "gpio57"; - drive-strength = <2>; - bias-disable; - }; + qup_i2c18_default: qup-i2c18-default-state { + pins = "gpio56", "gpio57"; + function = "qup18"; + drive-strength = <2>; + bias-disable; }; - qup_i2c19_default: qup-i2c19-default { - mux { - pins = "gpio0", "gpio1"; - function = "qup19"; - }; - - config { - pins = "gpio0", "gpio1"; - drive-strength = <2>; - bias-disable; - }; + qup_i2c19_default: qup-i2c19-default-state { + pins = "gpio0", "gpio1"; + function = "qup19"; + drive-strength = <2>; + bias-disable; }; - qup_spi0_cs: qup-spi0-cs { + qup_spi0_cs: qup-spi0-cs-state { pins = "gpio31"; function = "qup0"; }; - qup_spi0_cs_gpio: qup-spi0-cs-gpio { + qup_spi0_cs_gpio: qup-spi0-cs-gpio-state { pins = "gpio31"; function = "gpio"; }; - qup_spi0_data_clk: qup-spi0-data-clk { + qup_spi0_data_clk: qup-spi0-data-clk-state { pins = "gpio28", "gpio29", "gpio30"; function = "qup0"; }; - qup_spi1_cs: qup-spi1-cs { + qup_spi1_cs: qup-spi1-cs-state { pins = "gpio7"; function = "qup1"; }; - qup_spi1_cs_gpio: qup-spi1-cs-gpio { + qup_spi1_cs_gpio: qup-spi1-cs-gpio-state { pins = "gpio7"; function = "gpio"; }; - qup_spi1_data_clk: qup-spi1-data-clk { + qup_spi1_data_clk: qup-spi1-data-clk-state { pins = "gpio4", "gpio5", "gpio6"; function = "qup1"; }; - qup_spi2_cs: qup-spi2-cs { + qup_spi2_cs: qup-spi2-cs-state { pins = "gpio118"; function = "qup2"; }; - qup_spi2_cs_gpio: qup-spi2-cs-gpio { + qup_spi2_cs_gpio: qup-spi2-cs-gpio-state { pins = "gpio118"; function = "gpio"; }; - qup_spi2_data_clk: qup-spi2-data-clk { + qup_spi2_data_clk: qup-spi2-data-clk-state { pins = "gpio115", "gpio116", "gpio117"; function = "qup2"; }; - qup_spi3_cs: qup-spi3-cs { + qup_spi3_cs: qup-spi3-cs-state { pins = "gpio122"; function = "qup3"; }; - qup_spi3_cs_gpio: qup-spi3-cs-gpio { + qup_spi3_cs_gpio: qup-spi3-cs-gpio-state { pins = "gpio122"; function = "gpio"; }; - qup_spi3_data_clk: qup-spi3-data-clk { + qup_spi3_data_clk: qup-spi3-data-clk-state { pins = "gpio119", "gpio120", "gpio121"; function = "qup3"; }; - qup_spi4_cs: qup-spi4-cs { + qup_spi4_cs: qup-spi4-cs-state { pins = "gpio11"; function = "qup4"; }; - qup_spi4_cs_gpio: qup-spi4-cs-gpio { + qup_spi4_cs_gpio: qup-spi4-cs-gpio-state { pins = "gpio11"; function = "gpio"; }; - qup_spi4_data_clk: qup-spi4-data-clk { + qup_spi4_data_clk: qup-spi4-data-clk-state { pins = "gpio8", "gpio9", "gpio10"; function = "qup4"; }; - qup_spi5_cs: qup-spi5-cs { + qup_spi5_cs: qup-spi5-cs-state { pins = "gpio15"; function = "qup5"; }; - qup_spi5_cs_gpio: qup-spi5-cs-gpio { + qup_spi5_cs_gpio: qup-spi5-cs-gpio-state { pins = "gpio15"; function = "gpio"; }; - qup_spi5_data_clk: qup-spi5-data-clk { + qup_spi5_data_clk: qup-spi5-data-clk-state { pins = "gpio12", "gpio13", "gpio14"; function = "qup5"; }; - qup_spi6_cs: qup-spi6-cs { + qup_spi6_cs: qup-spi6-cs-state { pins = "gpio19"; function = "qup6"; }; - qup_spi6_cs_gpio: qup-spi6-cs-gpio { + qup_spi6_cs_gpio: qup-spi6-cs-gpio-state { pins = "gpio19"; function = "gpio"; }; - qup_spi6_data_clk: qup-spi6-data-clk { + qup_spi6_data_clk: qup-spi6-data-clk-state { pins = "gpio16", "gpio17", "gpio18"; function = "qup6"; }; - qup_spi7_cs: qup-spi7-cs { + qup_spi7_cs: qup-spi7-cs-state { pins = "gpio23"; function = "qup7"; }; - qup_spi7_cs_gpio: qup-spi7-cs-gpio { + qup_spi7_cs_gpio: qup-spi7-cs-gpio-state { pins = "gpio23"; function = "gpio"; }; - qup_spi7_data_clk: qup-spi7-data-clk { + qup_spi7_data_clk: qup-spi7-data-clk-state { pins = "gpio20", "gpio21", "gpio22"; function = "qup7"; }; - qup_spi8_cs: qup-spi8-cs { + qup_spi8_cs: qup-spi8-cs-state { pins = "gpio27"; function = "qup8"; }; - qup_spi8_cs_gpio: qup-spi8-cs-gpio { + qup_spi8_cs_gpio: qup-spi8-cs-gpio-state { pins = "gpio27"; function = "gpio"; }; - qup_spi8_data_clk: qup-spi8-data-clk { + qup_spi8_data_clk: qup-spi8-data-clk-state { pins = "gpio24", "gpio25", "gpio26"; function = "qup8"; }; - qup_spi9_cs: qup-spi9-cs { + qup_spi9_cs: qup-spi9-cs-state { pins = "gpio128"; function = "qup9"; }; - qup_spi9_cs_gpio: qup-spi9-cs-gpio { + qup_spi9_cs_gpio: qup-spi9-cs-gpio-state { pins = "gpio128"; function = "gpio"; }; - qup_spi9_data_clk: qup-spi9-data-clk { + qup_spi9_data_clk: qup-spi9-data-clk-state { pins = "gpio125", "gpio126", "gpio127"; function = "qup9"; }; - qup_spi10_cs: qup-spi10-cs { + qup_spi10_cs: qup-spi10-cs-state { pins = "gpio132"; function = "qup10"; }; - qup_spi10_cs_gpio: qup-spi10-cs-gpio { + qup_spi10_cs_gpio: qup-spi10-cs-gpio-state { pins = "gpio132"; function = "gpio"; }; - qup_spi10_data_clk: qup-spi10-data-clk { + qup_spi10_data_clk: qup-spi10-data-clk-state { pins = "gpio129", "gpio130", "gpio131"; function = "qup10"; }; - qup_spi11_cs: qup-spi11-cs { + qup_spi11_cs: qup-spi11-cs-state { pins = "gpio63"; function = "qup11"; }; - qup_spi11_cs_gpio: qup-spi11-cs-gpio { + qup_spi11_cs_gpio: qup-spi11-cs-gpio-state { pins = "gpio63"; function = "gpio"; }; - qup_spi11_data_clk: qup-spi11-data-clk { + qup_spi11_data_clk: qup-spi11-data-clk-state { pins = "gpio60", "gpio61", "gpio62"; function = "qup11"; }; - qup_spi12_cs: qup-spi12-cs { + qup_spi12_cs: qup-spi12-cs-state { pins = "gpio35"; function = "qup12"; }; - qup_spi12_cs_gpio: qup-spi12-cs-gpio { + qup_spi12_cs_gpio: qup-spi12-cs-gpio-state { pins = "gpio35"; function = "gpio"; }; - qup_spi12_data_clk: qup-spi12-data-clk { + qup_spi12_data_clk: qup-spi12-data-clk-state { pins = "gpio32", "gpio33", "gpio34"; function = "qup12"; }; - qup_spi13_cs: qup-spi13-cs { + qup_spi13_cs: qup-spi13-cs-state { pins = "gpio39"; function = "qup13"; }; - qup_spi13_cs_gpio: qup-spi13-cs-gpio { + qup_spi13_cs_gpio: qup-spi13-cs-gpio-state { pins = "gpio39"; function = "gpio"; }; - qup_spi13_data_clk: qup-spi13-data-clk { + qup_spi13_data_clk: qup-spi13-data-clk-state { pins = "gpio36", "gpio37", "gpio38"; function = "qup13"; }; - qup_spi14_cs: qup-spi14-cs { + qup_spi14_cs: qup-spi14-cs-state { pins = "gpio43"; function = "qup14"; }; - qup_spi14_cs_gpio: qup-spi14-cs-gpio { + qup_spi14_cs_gpio: qup-spi14-cs-gpio-state { pins = "gpio43"; function = "gpio"; }; - qup_spi14_data_clk: qup-spi14-data-clk { + qup_spi14_data_clk: qup-spi14-data-clk-state { pins = "gpio40", "gpio41", "gpio42"; function = "qup14"; }; - qup_spi15_cs: qup-spi15-cs { + qup_spi15_cs: qup-spi15-cs-state { pins = "gpio47"; function = "qup15"; }; - qup_spi15_cs_gpio: qup-spi15-cs-gpio { + qup_spi15_cs_gpio: qup-spi15-cs-gpio-state { pins = "gpio47"; function = "gpio"; }; - qup_spi15_data_clk: qup-spi15-data-clk { + qup_spi15_data_clk: qup-spi15-data-clk-state { pins = "gpio44", "gpio45", "gpio46"; function = "qup15"; }; - qup_spi16_cs: qup-spi16-cs { + qup_spi16_cs: qup-spi16-cs-state { pins = "gpio51"; function = "qup16"; }; - qup_spi16_cs_gpio: qup-spi16-cs-gpio { + qup_spi16_cs_gpio: qup-spi16-cs-gpio-state { pins = "gpio51"; function = "gpio"; }; - qup_spi16_data_clk: qup-spi16-data-clk { + qup_spi16_data_clk: qup-spi16-data-clk-state { pins = "gpio48", "gpio49", "gpio50"; function = "qup16"; }; - qup_spi17_cs: qup-spi17-cs { + qup_spi17_cs: qup-spi17-cs-state { pins = "gpio55"; function = "qup17"; }; - qup_spi17_cs_gpio: qup-spi17-cs-gpio { + qup_spi17_cs_gpio: qup-spi17-cs-gpio-state { pins = "gpio55"; function = "gpio"; }; - qup_spi17_data_clk: qup-spi17-data-clk { + qup_spi17_data_clk: qup-spi17-data-clk-state { pins = "gpio52", "gpio53", "gpio54"; function = "qup17"; }; - qup_spi18_cs: qup-spi18-cs { + qup_spi18_cs: qup-spi18-cs-state { pins = "gpio59"; function = "qup18"; }; - qup_spi18_cs_gpio: qup-spi18-cs-gpio { + qup_spi18_cs_gpio: qup-spi18-cs-gpio-state { pins = "gpio59"; function = "gpio"; }; - qup_spi18_data_clk: qup-spi18-data-clk { + qup_spi18_data_clk: qup-spi18-data-clk-state { pins = "gpio56", "gpio57", "gpio58"; function = "qup18"; }; - qup_spi19_cs: qup-spi19-cs { + qup_spi19_cs: qup-spi19-cs-state { pins = "gpio3"; function = "qup19"; }; - qup_spi19_cs_gpio: qup-spi19-cs-gpio { + qup_spi19_cs_gpio: qup-spi19-cs-gpio-state { pins = "gpio3"; function = "gpio"; }; - qup_spi19_data_clk: qup-spi19-data-clk { + qup_spi19_data_clk: qup-spi19-data-clk-state { pins = "gpio0", "gpio1", "gpio2"; function = "qup19"; }; - qup_uart2_default: qup-uart2-default { - mux { - pins = "gpio117", "gpio118"; - function = "qup2"; - }; + qup_uart2_default: qup-uart2-default-state { + pins = "gpio117", "gpio118"; + function = "qup2"; }; - qup_uart6_default: qup-uart6-default { - mux { - pins = "gpio16", "gpio17", - "gpio18", "gpio19"; - function = "qup6"; - }; + qup_uart6_default: qup-uart6-default-state { + pins = "gpio16", "gpio17", "gpio18", "gpio19"; + function = "qup6"; }; - qup_uart12_default: qup-uart12-default { - mux { - pins = "gpio34", "gpio35"; - function = "qup12"; - }; + qup_uart12_default: qup-uart12-default-state { + pins = "gpio34", "gpio35"; + function = "qup12"; }; - qup_uart17_default: qup-uart17-default { - mux { - pins = "gpio52", "gpio53", - "gpio54", "gpio55"; - function = "qup17"; - }; + qup_uart17_default: qup-uart17-default-state { + pins = "gpio52", "gpio53", "gpio54", "gpio55"; + function = "qup17"; }; - qup_uart18_default: qup-uart18-default { - mux { - pins = "gpio58", "gpio59"; - function = "qup18"; - }; + qup_uart18_default: qup-uart18-default-state { + pins = "gpio58", "gpio59"; + function = "qup18"; }; - tert_mi2s_active: tert-mi2s-active { - sck { + tert_mi2s_active: tert-mi2s-active-state { + sck-pins { pins = "gpio133"; function = "mi2s2_sck"; drive-strength = <8>; bias-disable; }; - data0 { + data0-pins { pins = "gpio134"; function = "mi2s2_data0"; drive-strength = <8>; @@ -4542,7 +4404,7 @@ output-high; }; - ws { + ws-pins { pins = "gpio135"; function = "mi2s2_ws"; drive-strength = <8>; @@ -4550,42 +4412,42 @@ }; }; - sdc2_sleep_state: sdc2-sleep { - clk { + sdc2_sleep_state: sdc2-sleep-state { + clk-pins { pins = "sdc2_clk"; drive-strength = <2>; bias-disable; }; - cmd { + cmd-pins { pins = "sdc2_cmd"; drive-strength = <2>; bias-pull-up; }; - data { + data-pins { pins = "sdc2_data"; drive-strength = <2>; bias-pull-up; }; }; - pcie0_default_state: pcie0-default { - perst { + pcie0_default_state: pcie0-default-state { + perst-pins { pins = "gpio79"; function = "gpio"; drive-strength = <2>; bias-pull-down; }; - clkreq { + clkreq-pins { pins = "gpio80"; function = "pci_e0"; drive-strength = <2>; bias-pull-up; }; - wake { + wake-pins { pins = "gpio81"; function = "gpio"; drive-strength = <2>; @@ -4593,22 +4455,22 @@ }; }; - pcie1_default_state: pcie1-default { - perst { + pcie1_default_state: pcie1-default-state { + perst-pins { pins = "gpio82"; function = "gpio"; drive-strength = <2>; bias-pull-down; }; - clkreq { + clkreq-pins { pins = "gpio83"; function = "pci_e1"; drive-strength = <2>; bias-pull-up; }; - wake { + wake-pins { pins = "gpio84"; function = "gpio"; drive-strength = <2>; @@ -4616,22 +4478,22 @@ }; }; - pcie2_default_state: pcie2-default { - perst { + pcie2_default_state: pcie2-default-state { + perst-pins { pins = "gpio85"; function = "gpio"; drive-strength = <2>; bias-pull-down; }; - clkreq { + clkreq-pins { pins = "gpio86"; function = "pci_e2"; drive-strength = <2>; bias-pull-up; }; - wake { + wake-pins { pins = "gpio87"; function = "gpio"; drive-strength = <2>; @@ -4790,13 +4652,13 @@ #address-cells = <1>; #size-cells = <0>; - apr-service@3 { + service@3 { reg = <APR_SVC_ADSP_CORE>; compatible = "qcom,q6core"; qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; }; - q6afe: apr-service@4 { + q6afe: service@4 { compatible = "qcom,q6afe"; reg = <APR_SVC_AFE>; qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; @@ -4807,13 +4669,13 @@ #sound-dai-cells = <1>; }; - q6afecc: cc { + q6afecc: clock-controller { compatible = "qcom,q6afe-clocks"; #clock-cells = <2>; }; }; - q6asm: apr-service@7 { + q6asm: service@7 { compatible = "qcom,q6asm"; reg = <APR_SVC_ASM>; qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; @@ -4826,7 +4688,7 @@ }; }; - q6adm: apr-service@8 { + q6adm: service@8 { compatible = "qcom,q6adm"; reg = <APR_SVC_ADM>; qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; @@ -4955,6 +4817,7 @@ qcom,drv-id = <2>; qcom,tcs-config = <ACTIVE_TCS 2>, <SLEEP_TCS 3>, <WAKE_TCS 3>, <CONTROL_TCS 1>; + power-domains = <&CLUSTER_PD>; rpmhcc: clock-controller { compatible = "qcom,sm8250-rpmh-clk"; diff --git a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi index b3c9952ac173..3365903cb931 100644 --- a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi @@ -3,6 +3,7 @@ * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org> */ +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include "sm8350.dtsi" #include "pm8350.dtsi" #include "pm8350b.dtsi" @@ -73,16 +74,365 @@ no-map; }; }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + + regulator-always-on; + regulator-boot-on; + }; }; &adsp { status = "okay"; - firmware-name = "qcom/adsp.mbn"; + firmware-name = "qcom/sm8350/Sony/sagami/adsp.mbn"; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm8350-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + vdd-s11-supply = <&vph_pwr>; + vdd-s12-supply = <&vph_pwr>; + + vdd-l1-l4-supply = <&pm8350_s11>; + vdd-l2-l7-supply = <&vreg_bob>; + vdd-l3-l5-supply = <&vreg_bob>; + vdd-l6-l9-l10-supply = <&pm8350_s11>; + + /* + * ARC regulators: + * S5 - mx.lvl + * S6 - gfx.lvl + * S9 - mxc.lvl + */ + + pm8350_s10: smps10 { + regulator-name = "pm8350_s10"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8350_s11: smps11 { + regulator-name = "pm8350_s11"; + regulator-min-microvolt = <752000>; + regulator-max-microvolt = <1000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8350_s12: smps12 { + regulator-name = "pm8350_s12"; + regulator-min-microvolt = <1224000>; + regulator-max-microvolt = <1360000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8350_l1: ldo1 { + regulator-name = "pm8350_l1"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8350_l2: ldo2 { + regulator-name = "pm8350_l2"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8350_l3: ldo3 { + regulator-name = "pm8350_l3"; + regulator-min-microvolt = <904000>; + regulator-max-microvolt = <904000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + /* L4 - lmx.lvl (ARC) */ + + pm8350_l5: ldo5 { + regulator-name = "pm8350_l5"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <888000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + }; + + pm8350_l6: ldo6 { + regulator-name = "pm8350_l6"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1208000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + }; + + pm8350_l7: ldo7 { + regulator-name = "pm8350_l7"; + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + }; + + /* L8 - lcx.lvl (ARC) */ + + pm8350_l9: ldo9 { + regulator-name = "pm8350_l9"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + }; + }; + + regulators-1 { + compatible = "qcom,pm8350c-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + + vdd-l1-l12-supply = <&pm8350c_s1>; + vdd-l2-l8-supply = <&pm8350c_s1>; + vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>; + vdd-l6-l9-l11-supply = <&vreg_bob>; + vdd-l10-supply = <&pm8350_s12>; + + vdd-bob-supply = <&vph_pwr>; + + pm8350c_s1: smps1 { + regulator-name = "pm8350c_s1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1952000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + /* S2 - ebi.lvl (ARC) */ + + pm8350c_s3: smps3 { + regulator-name = "pm8350c_s3"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <704000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + /* + * ARC regulators: + * S4 - mss.lvl + * S6 - cx.lvl + * S8 - mmcx.lvl + */ + + pm8350c_s10: smps10 { + regulator-name = "pm8350c_s10"; + regulator-min-microvolt = <1048000>; + regulator-max-microvolt = <1128000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8350c_l1: ldo1 { + regulator-name = "pm8350c_l1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8350c_l2: ldo2 { + regulator-name = "pm8350c_l2"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8350c_l3: ldo3 { + regulator-name = "pm8350c_l3"; + regulator-min-microvolt = <3304000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8350c_l4: ldo4 { + regulator-name = "pm8350c_l4"; + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8350c_l5: ldo5 { + regulator-name = "pm8350c_l5"; + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8350c_l6: ldo6 { + regulator-name = "pm8350c_l6"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8350c_l7: ldo7 { + regulator-name = "pm8350c_l7"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8350c_l8: ldo8 { + regulator-name = "pm8350c_l8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8350c_l9: ldo9 { + regulator-name = "pm8350c_l9"; + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8350c_l10: ldo10 { + regulator-name = "pm8350c_l10"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8350c_l11: ldo11 { + regulator-name = "pm8350c_l11"; + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8350c_l12: ldo12 { + regulator-name = "pm8350c_l12"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8350c_l13: ldo13 { + regulator-name = "pm8350c_l13"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_bob: bob { + regulator-name = "vreg_bob"; + regulator-min-microvolt = <3400000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + }; + }; + + /* TODO: Add pm8350b (just one ldo) once the driver part is in */ + + regulators-2 { + compatible = "qcom,pmr735a-rpmh-regulators"; + qcom,pmic-id = "e"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + + vdd-l1-l2-supply = <&pmr735a_s2>; + vdd-l3-supply = <&pmr735a_s1>; + vdd-l4-supply = <&pm8350c_s1>; + vdd-l5-l6-supply = <&pm8350c_s1>; + vdd-l7-bob-supply = <&vreg_bob>; + + pmr735a_s1: smps1 { + regulator-name = "pmr735a_s1"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1280000>; + }; + + pmr735a_s2: smps2 { + regulator-name = "pmr735a_s2"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <976000>; + }; + + pmr735a_s3: smps3 { + regulator-name = "pmr735a_s3"; + regulator-min-microvolt = <2208000>; + regulator-max-microvolt = <2352000>; + }; + + pmr735a_l1: ldo1 { + regulator-name = "pmr735a_l1"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + }; + + pmr735a_l2: ldo2 { + regulator-name = "pmr735a_l2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pmr735a_l3: ldo3 { + regulator-name = "pmr735a_l3"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pmr735a_l4: ldo4 { + regulator-name = "pmr735a_l4"; + regulator-min-microvolt = <1776000>; + regulator-max-microvolt = <1872000>; + }; + + pmr735a_l5: ldo5 { + regulator-name = "pmr735a_l5"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + }; + + pmr735a_l6: ldo6 { + regulator-name = "pmr735a_l6"; + regulator-min-microvolt = <480000>; + regulator-max-microvolt = <904000>; + }; + + pmr735a_l7: ldo7 { + regulator-name = "pmr735a_l7"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + }; }; &cdsp { status = "okay"; - firmware-name = "qcom/cdsp.mbn"; + firmware-name = "qcom/sm8350/Sony/sagami/cdsp.mbn"; }; &i2c1 { @@ -175,12 +525,12 @@ &ipa { status = "okay"; memory-region = <&pil_ipa_fw_mem>; - firmware-name = "qcom/ipa_fws.mbn"; + firmware-name = "qcom/sm8350/Sony/sagami/ipa_fws.mbn"; }; &mpss { status = "okay"; - firmware-name = "qcom/modem.mbn"; + firmware-name = "qcom/sm8350/Sony/sagami/modem.mbn"; }; &pmk8350_rtc { @@ -210,7 +560,7 @@ &slpi { status = "okay"; - firmware-name = "qcom/slpi.mbn"; + firmware-name = "qcom/sm8350/Sony/sagami/slpi.mbn"; }; &spi14 { @@ -235,25 +585,25 @@ &ufs_mem_hc { status = "disabled"; }; &ufs_mem_phy { status = "disabled"; }; -/* TODO: Make USB3 work (perhaps needs regulators for higher-current operation?) */ &usb_1 { status = "okay"; - - qcom,select-utmi-as-pipe-clk; }; &usb_1_dwc3 { dr_mode = "peripheral"; - - maximum-speed = "high-speed"; - phys = <&usb_1_hsphy>; - phy-names = "usb2-phy"; }; &usb_1_hsphy { status = "okay"; + + vdda-pll-supply = <&pm8350_l5>; + vdda18-supply = <&pm8350c_l1>; + vdda33-supply = <&pm8350_l2>; }; &usb_1_qmpphy { status = "okay"; + + vdda-phy-supply = <&pm8350_l6>; + vdda-pll-supply = <&pm8350_l1>; }; diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi index a86d9ea93b9d..49db223a0777 100644 --- a/arch/arm64/boot/dts/qcom/sm8350.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi @@ -678,7 +678,7 @@ }; gpi_dma2: dma-controller@800000 { - compatible = "qcom,sm8350-gpi-dma"; + compatible = "qcom,sm8350-gpi-dma", "qcom,sm6350-gpi-dma"; reg = <0 0x00800000 0 0x60000>; interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>, @@ -904,7 +904,7 @@ }; gpi_dma0: dma-controller@900000 { - compatible = "qcom,sm8350-gpi-dma"; + compatible = "qcom,sm8350-gpi-dma", "qcom,sm6350-gpi-dma"; reg = <0 0x09800000 0 0x60000>; interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>, @@ -1209,7 +1209,7 @@ }; gpi_dma1: dma-controller@a00000 { - compatible = "qcom,sm8350-gpi-dma"; + compatible = "qcom,sm8350-gpi-dma", "qcom,sm6350-gpi-dma"; reg = <0 0x00a00000 0 0x60000>; interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>, @@ -2004,6 +2004,7 @@ qcom,drv-id = <2>; qcom,tcs-config = <ACTIVE_TCS 2>, <SLEEP_TCS 3>, <WAKE_TCS 3>, <CONTROL_TCS 0>; + power-domains = <&CLUSTER_PD>; rpmhcc: clock-controller { compatible = "qcom,sm8350-rpmh-clk"; @@ -2142,11 +2143,11 @@ status = "disabled"; ufs_mem_phy_lanes: phy@1d87400 { - reg = <0 0x01d87400 0 0x108>, - <0 0x01d87600 0 0x1e0>, - <0 0x01d87c00 0 0x1dc>, - <0 0x01d87800 0 0x108>, - <0 0x01d87a00 0 0x1e0>; + reg = <0 0x01d87400 0 0x188>, + <0 0x01d87600 0 0x200>, + <0 0x01d87c00 0 0x200>, + <0 0x01d87800 0 0x188>, + <0 0x01d87a00 0 0x200>; #phy-cells = <0>; }; }; @@ -2221,7 +2222,7 @@ cdsp: remoteproc@98900000 { compatible = "qcom,sm8350-cdsp-pas"; - reg = <0 0x098900000 0 0x1400000>; + reg = <0 0x98900000 0 0x1400000>; interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_LEVEL_HIGH>, <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>, diff --git a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts index 38ccd44620d0..2dd4f8c8f931 100644 --- a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts +++ b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts @@ -394,8 +394,27 @@ status = "okay"; }; +&sdhc_2 { + cd-gpios = <&tlmm 92 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_default_state &sdc2_card_det_n>; + pinctrl-1 = <&sdc2_sleep_state &sdc2_card_det_n>; + vmmc-supply = <&vreg_l9c_2p96>; + vqmmc-supply = <&vreg_l6c_1p8>; + no-sdio; + no-mmc; + status = "okay"; +}; + &tlmm { gpio-reserved-ranges = <28 4>, <36 4>; + + sdc2_card_det_n: sd-card-det-n-state { + pins = "gpio92"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; }; &uart7 { diff --git a/arch/arm64/boot/dts/qcom/sm8450-qrd.dts b/arch/arm64/boot/dts/qcom/sm8450-qrd.dts index e58fc7399799..ee62514fff68 100644 --- a/arch/arm64/boot/dts/qcom/sm8450-qrd.dts +++ b/arch/arm64/boot/dts/qcom/sm8450-qrd.dts @@ -388,6 +388,18 @@ firmware-name = "qcom/sm8450/slpi.mbn"; }; +&sdhc_2 { + cd-gpios = <&tlmm 92 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_default_state &sdc2_card_det_n>; + pinctrl-1 = <&sdc2_sleep_state &sdc2_card_det_n>; + vmmc-supply = <&vreg_l9c_2p96>; + vqmmc-supply = <&vreg_l6c_1p8>; + no-sdio; + no-mmc; + status = "okay"; +}; + &spi4 { status = "okay"; }; @@ -402,6 +414,13 @@ &tlmm { gpio-reserved-ranges = <28 4>, <36 4>; + + sdc2_card_det_n: sd-card-det-n-state { + pins = "gpio92"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; }; &uart7 { diff --git a/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara-pdx223.dts b/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara-pdx223.dts index d68765eb6d4f..ae8ba297b0b6 100644 --- a/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara-pdx223.dts +++ b/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara-pdx223.dts @@ -523,17 +523,17 @@ }; &remoteproc_adsp { - firmware-name = "qcom/adsp.mbn"; + firmware-name = "qcom/sm8350/Sony/nagara/adsp.mbn"; status = "okay"; }; &remoteproc_cdsp { - firmware-name = "qcom/cdsp.mbn"; + firmware-name = "qcom/sm8350/Sony/nagara/cdsp.mbn"; status = "okay"; }; &remoteproc_slpi { - firmware-name = "qcom/slpi.mbn"; + firmware-name = "qcom/sm8350/Sony/nagara/slpi.mbn"; status = "okay"; }; @@ -556,8 +556,6 @@ pinctrl-1 = <&sdc2_sleep_state &sdc2_card_det_n>; vmmc-supply = <&pm8350c_l9>; vqmmc-supply = <&pm8350c_l6>; - /* Forbid SDR104/SDR50 - broken hw! */ - sdhci-caps-mask = <0x3 0x0>; no-sdio; no-mmc; status = "okay"; @@ -572,26 +570,6 @@ &tlmm { gpio-reserved-ranges = <28 4>; - sdc2_default_state: sdc2-default-state { - clk-pins { - pins = "sdc2_clk"; - drive-strength = <16>; - bias-disable; - }; - - cmd-pins { - pins = "sdc2_cmd"; - drive-strength = <16>; - bias-pull-up; - }; - - data-pins { - pins = "sdc2_data"; - drive-strength = <16>; - bias-pull-up; - }; - }; - ts_int_default: ts-int-default-state { pins = "gpio23"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi index d32f08df743d..f20db5456765 100644 --- a/arch/arm64/boot/dts/qcom/sm8450.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi @@ -7,6 +7,7 @@ #include <dt-bindings/clock/qcom,gcc-sm8450.h> #include <dt-bindings/clock/qcom,rpmh.h> #include <dt-bindings/clock/qcom,sm8450-camcc.h> +#include <dt-bindings/clock/qcom,sm8450-dispcc.h> #include <dt-bindings/dma/qcom-gpi.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/mailbox/qcom-ipcc.h> @@ -730,7 +731,7 @@ }; gpi_dma2: dma-controller@800000 { - compatible = "qcom,sm8450-gpi-dma"; + compatible = "qcom,sm8450-gpi-dma", "qcom,sm6350-gpi-dma"; #dma-cells = <3>; reg = <0 0x800000 0 0x60000>; interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>, @@ -791,7 +792,6 @@ interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&qup_spi15_data_clk>, <&qup_spi15_cs>; - spi-max-frequency = <50000000>; interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>; interconnect-names = "qup-core", "qup-config"; @@ -831,7 +831,6 @@ interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&qup_spi16_data_clk>, <&qup_spi16_cs>; - spi-max-frequency = <50000000>; interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>; interconnect-names = "qup-core", "qup-config"; @@ -871,7 +870,6 @@ interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&qup_spi17_data_clk>, <&qup_spi17_cs>; - spi-max-frequency = <50000000>; interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>; interconnect-names = "qup-core", "qup-config"; @@ -911,7 +909,6 @@ interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&qup_spi18_data_clk>, <&qup_spi18_cs>; - spi-max-frequency = <50000000>; interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>; interconnect-names = "qup-core", "qup-config"; @@ -951,7 +948,6 @@ interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&qup_spi19_data_clk>, <&qup_spi19_cs>; - spi-max-frequency = <50000000>; interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>; interconnect-names = "qup-core", "qup-config"; @@ -1004,7 +1000,6 @@ interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&qup_spi20_data_clk>, <&qup_spi20_cs>; - spi-max-frequency = <50000000>; interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>; interconnect-names = "qup-core", "qup-config"; @@ -1044,7 +1039,6 @@ interrupts = <GIC_SPI 579 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&qup_spi21_data_clk>, <&qup_spi21_cs>; - spi-max-frequency = <50000000>; interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>; interconnect-names = "qup-core", "qup-config"; @@ -1058,7 +1052,7 @@ }; gpi_dma0: dma-controller@900000 { - compatible = "qcom,sm8450-gpi-dma"; + compatible = "qcom,sm8450-gpi-dma", "qcom,sm6350-gpi-dma"; #dma-cells = <3>; reg = <0 0x900000 0 0x60000>; interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>, @@ -1394,7 +1388,7 @@ }; gpi_dma1: dma-controller@a00000 { - compatible = "qcom,sm8450-gpi-dma"; + compatible = "qcom,sm8450-gpi-dma", "qcom,sm6350-gpi-dma"; #dma-cells = <3>; reg = <0 0xa00000 0 0x60000>; interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>, @@ -2097,7 +2091,7 @@ remoteproc_adsp: remoteproc@30000000 { compatible = "qcom,sm8450-adsp-pas"; - reg = <0 0x030000000 0 0x100>; + reg = <0 0x30000000 0 0x100>; interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>, <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>, @@ -2163,7 +2157,7 @@ remoteproc_cdsp: remoteproc@32300000 { compatible = "qcom,sm8450-cdsp-pas"; - reg = <0 0x032300000 0 0x1400000>; + reg = <0 0x32300000 0 0x1400000>; interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>, <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>, @@ -2307,6 +2301,84 @@ }; }; + cci0: cci@ac15000 { + compatible = "qcom,sm8450-cci"; + reg = <0 0xac15000 0 0x1000>; + interrupts = <GIC_SPI 460 IRQ_TYPE_EDGE_RISING>; + power-domains = <&camcc TITAN_TOP_GDSC>; + + clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>, + <&camcc CAM_CC_SLOW_AHB_CLK_SRC>, + <&camcc CAM_CC_CPAS_AHB_CLK>, + <&camcc CAM_CC_CCI_0_CLK>, + <&camcc CAM_CC_CCI_0_CLK_SRC>; + clock-names = "camnoc_axi", + "slow_ahb_src", + "cpas_ahb", + "cci", + "cci_src"; + pinctrl-0 = <&cci0_default &cci1_default>; + pinctrl-1 = <&cci0_sleep &cci1_sleep>; + pinctrl-names = "default", "sleep"; + + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + + cci0_i2c0: i2c-bus@0 { + reg = <0>; + clock-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + + cci0_i2c1: i2c-bus@1 { + reg = <1>; + clock-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + cci1: cci@ac16000 { + compatible = "qcom,sm8450-cci"; + reg = <0 0xac16000 0 0x1000>; + interrupts = <GIC_SPI 271 IRQ_TYPE_EDGE_RISING>; + power-domains = <&camcc TITAN_TOP_GDSC>; + + clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>, + <&camcc CAM_CC_SLOW_AHB_CLK_SRC>, + <&camcc CAM_CC_CPAS_AHB_CLK>, + <&camcc CAM_CC_CCI_1_CLK>, + <&camcc CAM_CC_CCI_1_CLK_SRC>; + clock-names = "camnoc_axi", + "slow_ahb_src", + "cpas_ahb", + "cci", + "cci_src"; + pinctrl-0 = <&cci2_default &cci3_default>; + pinctrl-1 = <&cci2_sleep &cci3_sleep>; + pinctrl-names = "default", "sleep"; + + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + + cci1_i2c0: i2c-bus@0 { + reg = <0>; + clock-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + + cci1_i2c1: i2c-bus@1 { + reg = <1>; + clock-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + camcc: clock-controller@ade0000 { compatible = "qcom,sm8450-camcc"; reg = <0 0x0ade0000 0 0x20000>; @@ -2322,6 +2394,33 @@ status = "disabled"; }; + dispcc: clock-controller@af00000 { + compatible = "qcom,sm8450-dispcc"; + reg = <0 0x0af00000 0 0x20000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&rpmhcc RPMH_CXO_CLK_A>, + <&gcc GCC_DISP_AHB_CLK>, + <&sleep_clk>, + <0>, /* dsi0 */ + <0>, + <0>, /* dsi1 */ + <0>, + <0>, /* dp0 */ + <0>, + <0>, /* dp1 */ + <0>, + <0>, /* dp2 */ + <0>, + <0>, /* dp3 */ + <0>; + power-domains = <&rpmhpd SM8450_MMCX>; + required-opps = <&rpmhpd_opp_low_svs>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + status = "disabled"; + }; + pdc: interrupt-controller@b220000 { compatible = "qcom,sm8450-pdc", "qcom,pdc"; reg = <0 0x0b220000 0 0x30000>, <0 0x174000f0 0 0x64>; @@ -2384,6 +2483,26 @@ gpio-ranges = <&tlmm 0 0 211>; wakeup-parent = <&pdc>; + sdc2_default_state: sdc2-default-state { + clk-pins { + pins = "sdc2_clk"; + drive-strength = <16>; + bias-disable; + }; + + cmd-pins { + pins = "sdc2_cmd"; + drive-strength = <16>; + bias-pull-up; + }; + + data-pins { + pins = "sdc2_data"; + drive-strength = <16>; + bias-pull-up; + }; + }; + sdc2_sleep_state: sdc2-sleep-state { clk-pins { pins = "sdc2_clk"; @@ -2404,6 +2523,70 @@ }; }; + cci0_default: cci0-default-state { + /* SDA, SCL */ + pins = "gpio110", "gpio111"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-up; + }; + + cci0_sleep: cci0-sleep-state { + /* SDA, SCL */ + pins = "gpio110", "gpio111"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-down; + }; + + cci1_default: cci1-default-state { + /* SDA, SCL */ + pins = "gpio112", "gpio113"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-up; + }; + + cci1_sleep: cci1-sleep-state { + /* SDA, SCL */ + pins = "gpio112", "gpio113"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-down; + }; + + cci2_default: cci2-default-state { + /* SDA, SCL */ + pins = "gpio114", "gpio115"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-up; + }; + + cci2_sleep: cci2-sleep-state { + /* SDA, SCL */ + pins = "gpio114", "gpio115"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-down; + }; + + cci3_default: cci3-default-state { + /* SDA, SCL */ + pins = "gpio208", "gpio209"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-up; + }; + + cci3_sleep: cci3-sleep-state { + /* SDA, SCL */ + pins = "gpio208", "gpio209"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-down; + }; + pcie0_default_state: pcie0-default-state { perst-pins { pins = "gpio94"; @@ -2999,6 +3182,7 @@ qcom,drv-id = <2>; qcom,tcs-config = <ACTIVE_TCS 3>, <SLEEP_TCS 2>, <WAKE_TCS 2>, <CONTROL_TCS 0>; + power-domains = <&CLUSTER_PD>; apps_bcm_voter: bcm-voter { compatible = "qcom,bcm-voter"; @@ -3161,11 +3345,11 @@ status = "disabled"; ufs_mem_phy_lanes: phy@1d87400 { - reg = <0 0x01d87400 0 0x108>, - <0 0x01d87600 0 0x1e0>, - <0 0x01d87c00 0 0x1dc>, - <0 0x01d87800 0 0x108>, - <0 0x01d87a00 0 0x1e0>; + reg = <0 0x01d87400 0 0x188>, + <0 0x01d87600 0 0x200>, + <0 0x01d87c00 0 0x200>, + <0 0x01d87800 0 0x188>, + <0 0x01d87a00 0 0x200>; #phy-cells = <0>; }; }; @@ -3192,6 +3376,9 @@ bus-width = <4>; dma-coherent; + /* Forbid SDR104/SDR50 - broken hw! */ + sdhci-caps-mask = <0x3 0x0>; + status = "disabled"; sdhc2_opp_table: opp-table { diff --git a/include/dt-bindings/iio/qcom,spmi-adc7-pm8350.h b/include/dt-bindings/iio/qcom,spmi-adc7-pm8350.h index 9426f27a1946..09fd169ad18e 100644 --- a/include/dt-bindings/iio/qcom,spmi-adc7-pm8350.h +++ b/include/dt-bindings/iio/qcom,spmi-adc7-pm8350.h @@ -6,62 +6,58 @@ #ifndef _DT_BINDINGS_QCOM_SPMI_VADC_PM8350_H #define _DT_BINDINGS_QCOM_SPMI_VADC_PM8350_H -#ifndef PM8350_SID -#define PM8350_SID 1 -#endif - /* ADC channels for PM8350_ADC for PMIC7 */ -#define PM8350_ADC7_REF_GND (PM8350_SID << 8 | 0x0) -#define PM8350_ADC7_1P25VREF (PM8350_SID << 8 | 0x01) -#define PM8350_ADC7_VREF_VADC (PM8350_SID << 8 | 0x02) -#define PM8350_ADC7_DIE_TEMP (PM8350_SID << 8 | 0x03) - -#define PM8350_ADC7_AMUX_THM1 (PM8350_SID << 8 | 0x04) -#define PM8350_ADC7_AMUX_THM2 (PM8350_SID << 8 | 0x05) -#define PM8350_ADC7_AMUX_THM3 (PM8350_SID << 8 | 0x06) -#define PM8350_ADC7_AMUX_THM4 (PM8350_SID << 8 | 0x07) -#define PM8350_ADC7_AMUX_THM5 (PM8350_SID << 8 | 0x08) -#define PM8350_ADC7_GPIO1 (PM8350_SID << 8 | 0x0a) -#define PM8350_ADC7_GPIO2 (PM8350_SID << 8 | 0x0b) -#define PM8350_ADC7_GPIO3 (PM8350_SID << 8 | 0x0c) -#define PM8350_ADC7_GPIO4 (PM8350_SID << 8 | 0x0d) +#define PM8350_ADC7_REF_GND(sid) ((sid) << 8 | 0x0) +#define PM8350_ADC7_1P25VREF(sid) ((sid) << 8 | 0x01) +#define PM8350_ADC7_VREF_VADC(sid) ((sid) << 8 | 0x02) +#define PM8350_ADC7_DIE_TEMP(sid) ((sid) << 8 | 0x03) + +#define PM8350_ADC7_AMUX_THM1(sid) ((sid) << 8 | 0x04) +#define PM8350_ADC7_AMUX_THM2(sid) ((sid) << 8 | 0x05) +#define PM8350_ADC7_AMUX_THM3(sid) ((sid) << 8 | 0x06) +#define PM8350_ADC7_AMUX_THM4(sid) ((sid) << 8 | 0x07) +#define PM8350_ADC7_AMUX_THM5(sid) ((sid) << 8 | 0x08) +#define PM8350_ADC7_GPIO1(sid) ((sid) << 8 | 0x0a) +#define PM8350_ADC7_GPIO2(sid) ((sid) << 8 | 0x0b) +#define PM8350_ADC7_GPIO3(sid) ((sid) << 8 | 0x0c) +#define PM8350_ADC7_GPIO4(sid) ((sid) << 8 | 0x0d) /* 30k pull-up1 */ -#define PM8350_ADC7_AMUX_THM1_30K_PU (PM8350_SID << 8 | 0x24) -#define PM8350_ADC7_AMUX_THM2_30K_PU (PM8350_SID << 8 | 0x25) -#define PM8350_ADC7_AMUX_THM3_30K_PU (PM8350_SID << 8 | 0x26) -#define PM8350_ADC7_AMUX_THM4_30K_PU (PM8350_SID << 8 | 0x27) -#define PM8350_ADC7_AMUX_THM5_30K_PU (PM8350_SID << 8 | 0x28) -#define PM8350_ADC7_GPIO1_30K_PU (PM8350_SID << 8 | 0x2a) -#define PM8350_ADC7_GPIO2_30K_PU (PM8350_SID << 8 | 0x2b) -#define PM8350_ADC7_GPIO3_30K_PU (PM8350_SID << 8 | 0x2c) -#define PM8350_ADC7_GPIO4_30K_PU (PM8350_SID << 8 | 0x2d) +#define PM8350_ADC7_AMUX_THM1_30K_PU(sid) ((sid) << 8 | 0x24) +#define PM8350_ADC7_AMUX_THM2_30K_PU(sid) ((sid) << 8 | 0x25) +#define PM8350_ADC7_AMUX_THM3_30K_PU(sid) ((sid) << 8 | 0x26) +#define PM8350_ADC7_AMUX_THM4_30K_PU(sid) ((sid) << 8 | 0x27) +#define PM8350_ADC7_AMUX_THM5_30K_PU(sid) ((sid) << 8 | 0x28) +#define PM8350_ADC7_GPIO1_30K_PU(sid) ((sid) << 8 | 0x2a) +#define PM8350_ADC7_GPIO2_30K_PU(sid) ((sid) << 8 | 0x2b) +#define PM8350_ADC7_GPIO3_30K_PU(sid) ((sid) << 8 | 0x2c) +#define PM8350_ADC7_GPIO4_30K_PU(sid) ((sid) << 8 | 0x2d) /* 100k pull-up2 */ -#define PM8350_ADC7_AMUX_THM1_100K_PU (PM8350_SID << 8 | 0x44) -#define PM8350_ADC7_AMUX_THM2_100K_PU (PM8350_SID << 8 | 0x45) -#define PM8350_ADC7_AMUX_THM3_100K_PU (PM8350_SID << 8 | 0x46) -#define PM8350_ADC7_AMUX_THM4_100K_PU (PM8350_SID << 8 | 0x47) -#define PM8350_ADC7_AMUX_THM5_100K_PU (PM8350_SID << 8 | 0x48) -#define PM8350_ADC7_GPIO1_100K_PU (PM8350_SID << 8 | 0x4a) -#define PM8350_ADC7_GPIO2_100K_PU (PM8350_SID << 8 | 0x4b) -#define PM8350_ADC7_GPIO3_100K_PU (PM8350_SID << 8 | 0x4c) -#define PM8350_ADC7_GPIO4_100K_PU (PM8350_SID << 8 | 0x4d) +#define PM8350_ADC7_AMUX_THM1_100K_PU(sid) ((sid) << 8 | 0x44) +#define PM8350_ADC7_AMUX_THM2_100K_PU(sid) ((sid) << 8 | 0x45) +#define PM8350_ADC7_AMUX_THM3_100K_PU(sid) ((sid) << 8 | 0x46) +#define PM8350_ADC7_AMUX_THM4_100K_PU(sid) ((sid) << 8 | 0x47) +#define PM8350_ADC7_AMUX_THM5_100K_PU(sid) ((sid) << 8 | 0x48) +#define PM8350_ADC7_GPIO1_100K_PU(sid) ((sid) << 8 | 0x4a) +#define PM8350_ADC7_GPIO2_100K_PU(sid) ((sid) << 8 | 0x4b) +#define PM8350_ADC7_GPIO3_100K_PU(sid) ((sid) << 8 | 0x4c) +#define PM8350_ADC7_GPIO4_100K_PU(sid) ((sid) << 8 | 0x4d) /* 400k pull-up3 */ -#define PM8350_ADC7_AMUX_THM1_400K_PU (PM8350_SID << 8 | 0x64) -#define PM8350_ADC7_AMUX_THM2_400K_PU (PM8350_SID << 8 | 0x65) -#define PM8350_ADC7_AMUX_THM3_400K_PU (PM8350_SID << 8 | 0x66) -#define PM8350_ADC7_AMUX_THM4_400K_PU (PM8350_SID << 8 | 0x67) -#define PM8350_ADC7_AMUX_THM5_400K_PU (PM8350_SID << 8 | 0x68) -#define PM8350_ADC7_GPIO1_400K_PU (PM8350_SID << 8 | 0x6a) -#define PM8350_ADC7_GPIO2_400K_PU (PM8350_SID << 8 | 0x6b) -#define PM8350_ADC7_GPIO3_400K_PU (PM8350_SID << 8 | 0x6c) -#define PM8350_ADC7_GPIO4_400K_PU (PM8350_SID << 8 | 0x6d) +#define PM8350_ADC7_AMUX_THM1_400K_PU(sid) ((sid) << 8 | 0x64) +#define PM8350_ADC7_AMUX_THM2_400K_PU(sid) ((sid) << 8 | 0x65) +#define PM8350_ADC7_AMUX_THM3_400K_PU(sid) ((sid) << 8 | 0x66) +#define PM8350_ADC7_AMUX_THM4_400K_PU(sid) ((sid) << 8 | 0x67) +#define PM8350_ADC7_AMUX_THM5_400K_PU(sid) ((sid) << 8 | 0x68) +#define PM8350_ADC7_GPIO1_400K_PU(sid) ((sid) << 8 | 0x6a) +#define PM8350_ADC7_GPIO2_400K_PU(sid) ((sid) << 8 | 0x6b) +#define PM8350_ADC7_GPIO3_400K_PU(sid) ((sid) << 8 | 0x6c) +#define PM8350_ADC7_GPIO4_400K_PU(sid) ((sid) << 8 | 0x6d) /* 1/3 Divider */ -#define PM8350_ADC7_GPIO4_DIV3 (PM8350_SID << 8 | 0x8d) +#define PM8350_ADC7_GPIO4_DIV3(sid) ((sid) << 8 | 0x8d) -#define PM8350_ADC7_VPH_PWR (PM8350_SID << 8 | 0x8e) +#define PM8350_ADC7_VPH_PWR(sid) ((sid) << 8 | 0x8e) #endif /* _DT_BINDINGS_QCOM_SPMI_VADC_PM8350_H */ |