summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorBart Van Assche <bvanassche@acm.org>2018-09-26 14:01:03 -0700
committerJens Axboe <axboe@kernel.dk>2018-09-26 15:11:28 -0600
commitbca6b067b0b269a7b8ba129e2a918309ca8b4a55 (patch)
tree8c41db994ddaf2023d881189cd947fce24f3b7d3
parent3cfa210bf3fe0803cca17f3775d8cf2360d5f443 (diff)
downloadlinux-bca6b067b0b269a7b8ba129e2a918309ca8b4a55.tar.bz2
block: Move power management code into a new source file
Move the code for runtime power management from blk-core.c into the new source file blk-pm.c. Move the corresponding declarations from <linux/blkdev.h> into <linux/blk-pm.h>. For CONFIG_PM=n, leave out the declarations of the functions that are not used in that mode. This patch not only reduces the number of #ifdefs in the block layer core code but also reduces the size of header file <linux/blkdev.h> and hence should help to reduce the build time of the Linux kernel if CONFIG_PM is not defined. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Jianchao Wang <jianchao.w.wang@oracle.com> Cc: Hannes Reinecke <hare@suse.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-rw-r--r--block/Kconfig3
-rw-r--r--block/Makefile1
-rw-r--r--block/blk-core.c196
-rw-r--r--block/blk-pm.c188
-rw-r--r--block/blk-pm.h43
-rw-r--r--block/elevator.c22
-rw-r--r--drivers/scsi/scsi_pm.c1
-rw-r--r--drivers/scsi/sd.c1
-rw-r--r--drivers/scsi/sr.c1
-rw-r--r--include/linux/blk-pm.h24
-rw-r--r--include/linux/blkdev.h23
11 files changed, 264 insertions, 239 deletions
diff --git a/block/Kconfig b/block/Kconfig
index 1f2469a0123c..85263e7bded6 100644
--- a/block/Kconfig
+++ b/block/Kconfig
@@ -228,4 +228,7 @@ config BLK_MQ_RDMA
depends on BLOCK && INFINIBAND
default y
+config BLK_PM
+ def_bool BLOCK && PM
+
source block/Kconfig.iosched
diff --git a/block/Makefile b/block/Makefile
index 572b33f32c07..27eac600474f 100644
--- a/block/Makefile
+++ b/block/Makefile
@@ -37,3 +37,4 @@ obj-$(CONFIG_BLK_WBT) += blk-wbt.o
obj-$(CONFIG_BLK_DEBUG_FS) += blk-mq-debugfs.o
obj-$(CONFIG_BLK_DEBUG_FS_ZONED)+= blk-mq-debugfs-zoned.o
obj-$(CONFIG_BLK_SED_OPAL) += sed-opal.o
+obj-$(CONFIG_BLK_PM) += blk-pm.o
diff --git a/block/blk-core.c b/block/blk-core.c
index 4dbc93f43b38..6d4dd176bd9d 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -42,6 +42,7 @@
#include "blk.h"
#include "blk-mq.h"
#include "blk-mq-sched.h"
+#include "blk-pm.h"
#include "blk-rq-qos.h"
#ifdef CONFIG_DEBUG_FS
@@ -1726,16 +1727,6 @@ void part_round_stats(struct request_queue *q, int cpu, struct hd_struct *part)
}
EXPORT_SYMBOL_GPL(part_round_stats);
-#ifdef CONFIG_PM
-static void blk_pm_put_request(struct request *rq)
-{
- if (rq->q->dev && !(rq->rq_flags & RQF_PM) && !--rq->q->nr_pending)
- pm_runtime_mark_last_busy(rq->q->dev);
-}
-#else
-static inline void blk_pm_put_request(struct request *rq) {}
-#endif
-
void __blk_put_request(struct request_queue *q, struct request *req)
{
req_flags_t rq_flags = req->rq_flags;
@@ -3757,191 +3748,6 @@ void blk_finish_plug(struct blk_plug *plug)
}
EXPORT_SYMBOL(blk_finish_plug);
-#ifdef CONFIG_PM
-/**
- * blk_pm_runtime_init - Block layer runtime PM initialization routine
- * @q: the queue of the device
- * @dev: the device the queue belongs to
- *
- * Description:
- * Initialize runtime-PM-related fields for @q and start auto suspend for
- * @dev. Drivers that want to take advantage of request-based runtime PM
- * should call this function after @dev has been initialized, and its
- * request queue @q has been allocated, and runtime PM for it can not happen
- * yet(either due to disabled/forbidden or its usage_count > 0). In most
- * cases, driver should call this function before any I/O has taken place.
- *
- * This function takes care of setting up using auto suspend for the device,
- * the autosuspend delay is set to -1 to make runtime suspend impossible
- * until an updated value is either set by user or by driver. Drivers do
- * not need to touch other autosuspend settings.
- *
- * The block layer runtime PM is request based, so only works for drivers
- * that use request as their IO unit instead of those directly use bio's.
- */
-void blk_pm_runtime_init(struct request_queue *q, struct device *dev)
-{
- /* Don't enable runtime PM for blk-mq until it is ready */
- if (q->mq_ops) {
- pm_runtime_disable(dev);
- return;
- }
-
- q->dev = dev;
- q->rpm_status = RPM_ACTIVE;
- pm_runtime_set_autosuspend_delay(q->dev, -1);
- pm_runtime_use_autosuspend(q->dev);
-}
-EXPORT_SYMBOL(blk_pm_runtime_init);
-
-/**
- * blk_pre_runtime_suspend - Pre runtime suspend check
- * @q: the queue of the device
- *
- * Description:
- * This function will check if runtime suspend is allowed for the device
- * by examining if there are any requests pending in the queue. If there
- * are requests pending, the device can not be runtime suspended; otherwise,
- * the queue's status will be updated to SUSPENDING and the driver can
- * proceed to suspend the device.
- *
- * For the not allowed case, we mark last busy for the device so that
- * runtime PM core will try to autosuspend it some time later.
- *
- * This function should be called near the start of the device's
- * runtime_suspend callback.
- *
- * Return:
- * 0 - OK to runtime suspend the device
- * -EBUSY - Device should not be runtime suspended
- */
-int blk_pre_runtime_suspend(struct request_queue *q)
-{
- int ret = 0;
-
- if (!q->dev)
- return ret;
-
- spin_lock_irq(q->queue_lock);
- if (q->nr_pending) {
- ret = -EBUSY;
- pm_runtime_mark_last_busy(q->dev);
- } else {
- q->rpm_status = RPM_SUSPENDING;
- }
- spin_unlock_irq(q->queue_lock);
- return ret;
-}
-EXPORT_SYMBOL(blk_pre_runtime_suspend);
-
-/**
- * blk_post_runtime_suspend - Post runtime suspend processing
- * @q: the queue of the device
- * @err: return value of the device's runtime_suspend function
- *
- * Description:
- * Update the queue's runtime status according to the return value of the
- * device's runtime suspend function and mark last busy for the device so
- * that PM core will try to auto suspend the device at a later time.
- *
- * This function should be called near the end of the device's
- * runtime_suspend callback.
- */
-void blk_post_runtime_suspend(struct request_queue *q, int err)
-{
- if (!q->dev)
- return;
-
- spin_lock_irq(q->queue_lock);
- if (!err) {
- q->rpm_status = RPM_SUSPENDED;
- } else {
- q->rpm_status = RPM_ACTIVE;
- pm_runtime_mark_last_busy(q->dev);
- }
- spin_unlock_irq(q->queue_lock);
-}
-EXPORT_SYMBOL(blk_post_runtime_suspend);
-
-/**
- * blk_pre_runtime_resume - Pre runtime resume processing
- * @q: the queue of the device
- *
- * Description:
- * Update the queue's runtime status to RESUMING in preparation for the
- * runtime resume of the device.
- *
- * This function should be called near the start of the device's
- * runtime_resume callback.
- */
-void blk_pre_runtime_resume(struct request_queue *q)
-{
- if (!q->dev)
- return;
-
- spin_lock_irq(q->queue_lock);
- q->rpm_status = RPM_RESUMING;
- spin_unlock_irq(q->queue_lock);
-}
-EXPORT_SYMBOL(blk_pre_runtime_resume);
-
-/**
- * blk_post_runtime_resume - Post runtime resume processing
- * @q: the queue of the device
- * @err: return value of the device's runtime_resume function
- *
- * Description:
- * Update the queue's runtime status according to the return value of the
- * device's runtime_resume function. If it is successfully resumed, process
- * the requests that are queued into the device's queue when it is resuming
- * and then mark last busy and initiate autosuspend for it.
- *
- * This function should be called near the end of the device's
- * runtime_resume callback.
- */
-void blk_post_runtime_resume(struct request_queue *q, int err)
-{
- if (!q->dev)
- return;
-
- spin_lock_irq(q->queue_lock);
- if (!err) {
- q->rpm_status = RPM_ACTIVE;
- __blk_run_queue(q);
- pm_runtime_mark_last_busy(q->dev);
- pm_request_autosuspend(q->dev);
- } else {
- q->rpm_status = RPM_SUSPENDED;
- }
- spin_unlock_irq(q->queue_lock);
-}
-EXPORT_SYMBOL(blk_post_runtime_resume);
-
-/**
- * blk_set_runtime_active - Force runtime status of the queue to be active
- * @q: the queue of the device
- *
- * If the device is left runtime suspended during system suspend the resume
- * hook typically resumes the device and corrects runtime status
- * accordingly. However, that does not affect the queue runtime PM status
- * which is still "suspended". This prevents processing requests from the
- * queue.
- *
- * This function can be used in driver's resume hook to correct queue
- * runtime PM status and re-enable peeking requests from the queue. It
- * should be called before first request is added to the queue.
- */
-void blk_set_runtime_active(struct request_queue *q)
-{
- spin_lock_irq(q->queue_lock);
- q->rpm_status = RPM_ACTIVE;
- pm_runtime_mark_last_busy(q->dev);
- pm_request_autosuspend(q->dev);
- spin_unlock_irq(q->queue_lock);
-}
-EXPORT_SYMBOL(blk_set_runtime_active);
-#endif
-
int __init blk_dev_init(void)
{
BUILD_BUG_ON(REQ_OP_LAST >= (1 << REQ_OP_BITS));
diff --git a/block/blk-pm.c b/block/blk-pm.c
new file mode 100644
index 000000000000..9b636960d285
--- /dev/null
+++ b/block/blk-pm.c
@@ -0,0 +1,188 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/blk-pm.h>
+#include <linux/blkdev.h>
+#include <linux/pm_runtime.h>
+
+/**
+ * blk_pm_runtime_init - Block layer runtime PM initialization routine
+ * @q: the queue of the device
+ * @dev: the device the queue belongs to
+ *
+ * Description:
+ * Initialize runtime-PM-related fields for @q and start auto suspend for
+ * @dev. Drivers that want to take advantage of request-based runtime PM
+ * should call this function after @dev has been initialized, and its
+ * request queue @q has been allocated, and runtime PM for it can not happen
+ * yet(either due to disabled/forbidden or its usage_count > 0). In most
+ * cases, driver should call this function before any I/O has taken place.
+ *
+ * This function takes care of setting up using auto suspend for the device,
+ * the autosuspend delay is set to -1 to make runtime suspend impossible
+ * until an updated value is either set by user or by driver. Drivers do
+ * not need to touch other autosuspend settings.
+ *
+ * The block layer runtime PM is request based, so only works for drivers
+ * that use request as their IO unit instead of those directly use bio's.
+ */
+void blk_pm_runtime_init(struct request_queue *q, struct device *dev)
+{
+ /* Don't enable runtime PM for blk-mq until it is ready */
+ if (q->mq_ops) {
+ pm_runtime_disable(dev);
+ return;
+ }
+
+ q->dev = dev;
+ q->rpm_status = RPM_ACTIVE;
+ pm_runtime_set_autosuspend_delay(q->dev, -1);
+ pm_runtime_use_autosuspend(q->dev);
+}
+EXPORT_SYMBOL(blk_pm_runtime_init);
+
+/**
+ * blk_pre_runtime_suspend - Pre runtime suspend check
+ * @q: the queue of the device
+ *
+ * Description:
+ * This function will check if runtime suspend is allowed for the device
+ * by examining if there are any requests pending in the queue. If there
+ * are requests pending, the device can not be runtime suspended; otherwise,
+ * the queue's status will be updated to SUSPENDING and the driver can
+ * proceed to suspend the device.
+ *
+ * For the not allowed case, we mark last busy for the device so that
+ * runtime PM core will try to autosuspend it some time later.
+ *
+ * This function should be called near the start of the device's
+ * runtime_suspend callback.
+ *
+ * Return:
+ * 0 - OK to runtime suspend the device
+ * -EBUSY - Device should not be runtime suspended
+ */
+int blk_pre_runtime_suspend(struct request_queue *q)
+{
+ int ret = 0;
+
+ if (!q->dev)
+ return ret;
+
+ spin_lock_irq(q->queue_lock);
+ if (q->nr_pending) {
+ ret = -EBUSY;
+ pm_runtime_mark_last_busy(q->dev);
+ } else {
+ q->rpm_status = RPM_SUSPENDING;
+ }
+ spin_unlock_irq(q->queue_lock);
+ return ret;
+}
+EXPORT_SYMBOL(blk_pre_runtime_suspend);
+
+/**
+ * blk_post_runtime_suspend - Post runtime suspend processing
+ * @q: the queue of the device
+ * @err: return value of the device's runtime_suspend function
+ *
+ * Description:
+ * Update the queue's runtime status according to the return value of the
+ * device's runtime suspend function and mark last busy for the device so
+ * that PM core will try to auto suspend the device at a later time.
+ *
+ * This function should be called near the end of the device's
+ * runtime_suspend callback.
+ */
+void blk_post_runtime_suspend(struct request_queue *q, int err)
+{
+ if (!q->dev)
+ return;
+
+ spin_lock_irq(q->queue_lock);
+ if (!err) {
+ q->rpm_status = RPM_SUSPENDED;
+ } else {
+ q->rpm_status = RPM_ACTIVE;
+ pm_runtime_mark_last_busy(q->dev);
+ }
+ spin_unlock_irq(q->queue_lock);
+}
+EXPORT_SYMBOL(blk_post_runtime_suspend);
+
+/**
+ * blk_pre_runtime_resume - Pre runtime resume processing
+ * @q: the queue of the device
+ *
+ * Description:
+ * Update the queue's runtime status to RESUMING in preparation for the
+ * runtime resume of the device.
+ *
+ * This function should be called near the start of the device's
+ * runtime_resume callback.
+ */
+void blk_pre_runtime_resume(struct request_queue *q)
+{
+ if (!q->dev)
+ return;
+
+ spin_lock_irq(q->queue_lock);
+ q->rpm_status = RPM_RESUMING;
+ spin_unlock_irq(q->queue_lock);
+}
+EXPORT_SYMBOL(blk_pre_runtime_resume);
+
+/**
+ * blk_post_runtime_resume - Post runtime resume processing
+ * @q: the queue of the device
+ * @err: return value of the device's runtime_resume function
+ *
+ * Description:
+ * Update the queue's runtime status according to the return value of the
+ * device's runtime_resume function. If it is successfully resumed, process
+ * the requests that are queued into the device's queue when it is resuming
+ * and then mark last busy and initiate autosuspend for it.
+ *
+ * This function should be called near the end of the device's
+ * runtime_resume callback.
+ */
+void blk_post_runtime_resume(struct request_queue *q, int err)
+{
+ if (!q->dev)
+ return;
+
+ spin_lock_irq(q->queue_lock);
+ if (!err) {
+ q->rpm_status = RPM_ACTIVE;
+ __blk_run_queue(q);
+ pm_runtime_mark_last_busy(q->dev);
+ pm_request_autosuspend(q->dev);
+ } else {
+ q->rpm_status = RPM_SUSPENDED;
+ }
+ spin_unlock_irq(q->queue_lock);
+}
+EXPORT_SYMBOL(blk_post_runtime_resume);
+
+/**
+ * blk_set_runtime_active - Force runtime status of the queue to be active
+ * @q: the queue of the device
+ *
+ * If the device is left runtime suspended during system suspend the resume
+ * hook typically resumes the device and corrects runtime status
+ * accordingly. However, that does not affect the queue runtime PM status
+ * which is still "suspended". This prevents processing requests from the
+ * queue.
+ *
+ * This function can be used in driver's resume hook to correct queue
+ * runtime PM status and re-enable peeking requests from the queue. It
+ * should be called before first request is added to the queue.
+ */
+void blk_set_runtime_active(struct request_queue *q)
+{
+ spin_lock_irq(q->queue_lock);
+ q->rpm_status = RPM_ACTIVE;
+ pm_runtime_mark_last_busy(q->dev);
+ pm_request_autosuspend(q->dev);
+ spin_unlock_irq(q->queue_lock);
+}
+EXPORT_SYMBOL(blk_set_runtime_active);
diff --git a/block/blk-pm.h b/block/blk-pm.h
new file mode 100644
index 000000000000..1ffc8ef203ec
--- /dev/null
+++ b/block/blk-pm.h
@@ -0,0 +1,43 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef _BLOCK_BLK_PM_H_
+#define _BLOCK_BLK_PM_H_
+
+#include <linux/pm_runtime.h>
+
+#ifdef CONFIG_PM
+static inline void blk_pm_requeue_request(struct request *rq)
+{
+ if (rq->q->dev && !(rq->rq_flags & RQF_PM))
+ rq->q->nr_pending--;
+}
+
+static inline void blk_pm_add_request(struct request_queue *q,
+ struct request *rq)
+{
+ if (q->dev && !(rq->rq_flags & RQF_PM) && q->nr_pending++ == 0 &&
+ (q->rpm_status == RPM_SUSPENDED || q->rpm_status == RPM_SUSPENDING))
+ pm_request_resume(q->dev);
+}
+
+static inline void blk_pm_put_request(struct request *rq)
+{
+ if (rq->q->dev && !(rq->rq_flags & RQF_PM) && !--rq->q->nr_pending)
+ pm_runtime_mark_last_busy(rq->q->dev);
+}
+#else
+static inline void blk_pm_requeue_request(struct request *rq)
+{
+}
+
+static inline void blk_pm_add_request(struct request_queue *q,
+ struct request *rq)
+{
+}
+
+static inline void blk_pm_put_request(struct request *rq)
+{
+}
+#endif
+
+#endif /* _BLOCK_BLK_PM_H_ */
diff --git a/block/elevator.c b/block/elevator.c
index 6a06b5d040e5..e18ac68626e3 100644
--- a/block/elevator.c
+++ b/block/elevator.c
@@ -41,6 +41,7 @@
#include "blk.h"
#include "blk-mq-sched.h"
+#include "blk-pm.h"
#include "blk-wbt.h"
static DEFINE_SPINLOCK(elv_list_lock);
@@ -557,27 +558,6 @@ void elv_bio_merged(struct request_queue *q, struct request *rq,
e->type->ops.sq.elevator_bio_merged_fn(q, rq, bio);
}
-#ifdef CONFIG_PM
-static void blk_pm_requeue_request(struct request *rq)
-{
- if (rq->q->dev && !(rq->rq_flags & RQF_PM))
- rq->q->nr_pending--;
-}
-
-static void blk_pm_add_request(struct request_queue *q, struct request *rq)
-{
- if (q->dev && !(rq->rq_flags & RQF_PM) && q->nr_pending++ == 0 &&
- (q->rpm_status == RPM_SUSPENDED || q->rpm_status == RPM_SUSPENDING))
- pm_request_resume(q->dev);
-}
-#else
-static inline void blk_pm_requeue_request(struct request *rq) {}
-static inline void blk_pm_add_request(struct request_queue *q,
- struct request *rq)
-{
-}
-#endif
-
void elv_requeue_request(struct request_queue *q, struct request *rq)
{
/*
diff --git a/drivers/scsi/scsi_pm.c b/drivers/scsi/scsi_pm.c
index b44c1bb687a2..a2b4179bfdf7 100644
--- a/drivers/scsi/scsi_pm.c
+++ b/drivers/scsi/scsi_pm.c
@@ -8,6 +8,7 @@
#include <linux/pm_runtime.h>
#include <linux/export.h>
#include <linux/async.h>
+#include <linux/blk-pm.h>
#include <scsi/scsi.h>
#include <scsi/scsi_device.h>
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index b79b366a94f7..64514e8359e4 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -45,6 +45,7 @@
#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/blkpg.h>
+#include <linux/blk-pm.h>
#include <linux/delay.h>
#include <linux/mutex.h>
#include <linux/string_helpers.h>
diff --git a/drivers/scsi/sr.c b/drivers/scsi/sr.c
index d0389b20574d..4f07b3410595 100644
--- a/drivers/scsi/sr.c
+++ b/drivers/scsi/sr.c
@@ -43,6 +43,7 @@
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/blkdev.h>
+#include <linux/blk-pm.h>
#include <linux/mutex.h>
#include <linux/slab.h>
#include <linux/pm_runtime.h>
diff --git a/include/linux/blk-pm.h b/include/linux/blk-pm.h
new file mode 100644
index 000000000000..b80c65aba249
--- /dev/null
+++ b/include/linux/blk-pm.h
@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef _BLK_PM_H_
+#define _BLK_PM_H_
+
+struct device;
+struct request_queue;
+
+/*
+ * block layer runtime pm functions
+ */
+#ifdef CONFIG_PM
+extern void blk_pm_runtime_init(struct request_queue *q, struct device *dev);
+extern int blk_pre_runtime_suspend(struct request_queue *q);
+extern void blk_post_runtime_suspend(struct request_queue *q, int err);
+extern void blk_pre_runtime_resume(struct request_queue *q);
+extern void blk_post_runtime_resume(struct request_queue *q, int err);
+extern void blk_set_runtime_active(struct request_queue *q);
+#else
+static inline void blk_pm_runtime_init(struct request_queue *q,
+ struct device *dev) {}
+#endif
+
+#endif /* _BLK_PM_H_ */
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index 1d5e14139795..cd863511dedb 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -1281,29 +1281,6 @@ extern void blk_put_queue(struct request_queue *);
extern void blk_set_queue_dying(struct request_queue *);
/*
- * block layer runtime pm functions
- */
-#ifdef CONFIG_PM
-extern void blk_pm_runtime_init(struct request_queue *q, struct device *dev);
-extern int blk_pre_runtime_suspend(struct request_queue *q);
-extern void blk_post_runtime_suspend(struct request_queue *q, int err);
-extern void blk_pre_runtime_resume(struct request_queue *q);
-extern void blk_post_runtime_resume(struct request_queue *q, int err);
-extern void blk_set_runtime_active(struct request_queue *q);
-#else
-static inline void blk_pm_runtime_init(struct request_queue *q,
- struct device *dev) {}
-static inline int blk_pre_runtime_suspend(struct request_queue *q)
-{
- return -ENOSYS;
-}
-static inline void blk_post_runtime_suspend(struct request_queue *q, int err) {}
-static inline void blk_pre_runtime_resume(struct request_queue *q) {}
-static inline void blk_post_runtime_resume(struct request_queue *q, int err) {}
-static inline void blk_set_runtime_active(struct request_queue *q) {}
-#endif
-
-/*
* blk_plug permits building a queue of related requests by holding the I/O
* fragments for a short period. This allows merging of sequential requests
* into single larger request. As the requests are moved from a per-task list to