diff options
| author | Dinh Nguyen <dinguyen@kernel.org> | 2017-10-16 08:57:18 -0500 |
|---|---|---|
| committer | Felipe Balbi <felipe.balbi@linux.intel.com> | 2017-10-19 10:38:14 +0300 |
| commit | b11633c42a766cb3c824e3583163b9adf67501fe (patch) | |
| tree | 1e4aeec9d408e929c66a4f3cfde977dd23e76980 | |
| parent | 32428aa22d08a1be660b571a0f71880e5a9dd926 (diff) | |
| download | linux-b11633c42a766cb3c824e3583163b9adf67501fe.tar.bz2 | |
usb: dwc2: disable erroneous overcurrent condition
For the case where an external VBUS is used, we should enable the external
VBUS comparator in the driver. This would prevent an unnecessary
overcurrent error which would then disable the host port.
This patch uses the standard 'disable-over-current' binding to allow of the
option of disabling the over-current condition.
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
| -rw-r--r-- | drivers/usb/dwc2/core.h | 4 | ||||
| -rw-r--r-- | drivers/usb/dwc2/hcd.c | 5 | ||||
| -rw-r--r-- | drivers/usb/dwc2/params.c | 3 |
3 files changed, 12 insertions, 0 deletions
diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h index 8367d4f985c1..730d7eb449bb 100644 --- a/drivers/usb/dwc2/core.h +++ b/drivers/usb/dwc2/core.h @@ -395,6 +395,9 @@ enum dwc2_ep0_state { * (default when phy_type is UTMI+ or ULPI) * 1 - 6 MHz * (default when phy_type is Full Speed) + * @oc_disable: Flag to disable overcurrent condition. + * 0 - Allow overcurrent condition to get detected + * 1 - Disable overcurrent condtion to get detected * @ts_dline: Enable Term Select Dline pulsing * 0 - No (default) * 1 - Yes @@ -492,6 +495,7 @@ struct dwc2_core_params { bool dma_desc_fs_enable; bool host_support_fs_ls_low_power; bool host_ls_low_power_phy_clk; + bool oc_disable; u8 host_channels; u16 host_rx_fifo_size; diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c index c2631145f404..5e2033616aca 100644 --- a/drivers/usb/dwc2/hcd.c +++ b/drivers/usb/dwc2/hcd.c @@ -213,6 +213,11 @@ static int dwc2_hs_phy_init(struct dwc2_hsotg *hsotg, bool select_phy) usbcfg &= ~(GUSBCFG_PHYIF16 | GUSBCFG_DDRSEL); if (hsotg->params.phy_ulpi_ddr) usbcfg |= GUSBCFG_DDRSEL; + + /* Set external VBUS indicator as needed. */ + if (hsotg->params.oc_disable) + usbcfg |= (GUSBCFG_ULPI_INT_VBUS_IND | + GUSBCFG_INDICATORPASSTHROUGH); break; case DWC2_PHY_TYPE_PARAM_UTMI: /* UTMI+ interface */ diff --git a/drivers/usb/dwc2/params.c b/drivers/usb/dwc2/params.c index 015d23ebcf5a..fe770a2834d2 100644 --- a/drivers/usb/dwc2/params.c +++ b/drivers/usb/dwc2/params.c @@ -346,6 +346,9 @@ static void dwc2_get_device_properties(struct dwc2_hsotg *hsotg) num); } } + + if (of_find_property(hsotg->dev->of_node, "disable-over-current", NULL)) + p->oc_disable = true; } static void dwc2_check_param_otg_cap(struct dwc2_hsotg *hsotg) |