summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2008-09-02 11:44:11 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2008-09-02 11:44:11 -0700
commitafa153fd7b6afcd55dd6df6aea06bb53aa1d3608 (patch)
tree87afe5df8802876a7937cfdcf977462c5c2399fe
parentba6271ea6324decab4c47c4a55de95188d930792 (diff)
parent5a61dd9ec8c5a8e14fbccda3ab042555b692b9b2 (diff)
downloadlinux-afa153fd7b6afcd55dd6df6aea06bb53aa1d3608.tar.bz2
Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: ide/Kconfig: mark ide-scsi as deprecated ide-disk: remove stale init_idedisk_capacity() documentation palm_bk3710: improve IDE registration ide: fix hwif_to_node() IDE: palm_bk3710: fix compile warning for unused variable IDE: compile fix for sff_dma_ops
-rw-r--r--drivers/ide/Kconfig16
-rw-r--r--drivers/ide/arm/palm_bk3710.c8
-rw-r--r--drivers/ide/ide-disk.c14
-rw-r--r--include/linux/ide.h5
4 files changed, 6 insertions, 37 deletions
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index a34758d29516..fc735ab08ff4 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -242,7 +242,7 @@ config BLK_DEV_IDEFLOPPY
module will be called ide-floppy.
config BLK_DEV_IDESCSI
- tristate "SCSI emulation support"
+ tristate "SCSI emulation support (DEPRECATED)"
depends on SCSI
select IDE_ATAPI
---help---
@@ -255,20 +255,6 @@ config BLK_DEV_IDESCSI
and will allow you to use a SCSI device driver instead of a native
ATAPI driver.
- This is useful if you have an ATAPI device for which no native
- driver has been written (for example, an ATAPI PD-CD drive);
- you can then use this emulation together with an appropriate SCSI
- device driver. In order to do this, say Y here and to "SCSI support"
- and "SCSI generic support", below. You must then provide the kernel
- command line "hdx=ide-scsi" (try "man bootparam" or see the
- documentation of your boot loader (lilo or loadlin) about how to
- pass options to the kernel at boot time) for devices if you want the
- native EIDE sub-drivers to skip over the native support, so that
- this SCSI emulation can be used instead.
-
- Note that this option does NOT allow you to attach SCSI devices to a
- box that doesn't have a SCSI host adapter installed.
-
If both this SCSI emulation and native ATAPI support are compiled
into the kernel, the native support will be used.
diff --git a/drivers/ide/arm/palm_bk3710.c b/drivers/ide/arm/palm_bk3710.c
index f788fa5a977b..4fd91dcf1dc2 100644
--- a/drivers/ide/arm/palm_bk3710.c
+++ b/drivers/ide/arm/palm_bk3710.c
@@ -343,11 +343,10 @@ static struct ide_port_info __devinitdata palm_bk3710_port_info = {
.mwdma_mask = ATA_MWDMA2,
};
-static int __devinit palm_bk3710_probe(struct platform_device *pdev)
+static int __init palm_bk3710_probe(struct platform_device *pdev)
{
struct clk *clk;
struct resource *mem, *irq;
- struct ide_host *host;
unsigned long base, rate;
int i, rc;
hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
@@ -390,6 +389,7 @@ static int __devinit palm_bk3710_probe(struct platform_device *pdev)
hw.io_ports_array[i] = base + IDE_PALM_ATA_PRI_REG_OFFSET + i;
hw.io_ports.ctl_addr = base + IDE_PALM_ATA_PRI_CTL_OFFSET;
hw.irq = irq->start;
+ hw.dev = &pdev->dev;
hw.chipset = ide_palm3710;
palm_bk3710_port_info.udma_mask = rate < 100000000 ? ATA_UDMA4 :
@@ -413,13 +413,11 @@ static struct platform_driver platform_bk_driver = {
.name = "palm_bk3710",
.owner = THIS_MODULE,
},
- .probe = palm_bk3710_probe,
- .remove = NULL,
};
static int __init palm_bk3710_init(void)
{
- return platform_driver_register(&platform_bk_driver);
+ return platform_driver_probe(&platform_bk_driver, palm_bk3710_probe);
}
module_init(palm_bk3710_init);
diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c
index 68b9cf0138b0..07ef88bd109b 100644
--- a/drivers/ide/ide-disk.c
+++ b/drivers/ide/ide-disk.c
@@ -445,20 +445,6 @@ static void idedisk_check_hpa(ide_drive_t *drive)
}
}
-/*
- * Compute drive->capacity, the full capacity of the drive
- * Called with drive->id != NULL.
- *
- * To compute capacity, this uses either of
- *
- * 1. CHS value set by user (whatever user sets will be trusted)
- * 2. LBA value from target drive (require new ATA feature)
- * 3. LBA value from system BIOS (new one is OK, old one may break)
- * 4. CHS value from system BIOS (traditional style)
- *
- * in above order (i.e., if value of higher priority is available,
- * reset will be ignored).
- */
static void init_idedisk_capacity(ide_drive_t *drive)
{
struct hd_driveid *id = drive->id;
diff --git a/include/linux/ide.h b/include/linux/ide.h
index 87c12ed96954..1524829f73f2 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -1111,7 +1111,6 @@ void ide_setup_pci_noise(struct pci_dev *, const struct ide_port_info *);
#ifdef CONFIG_BLK_DEV_IDEDMA_PCI
int ide_pci_set_master(struct pci_dev *, const char *);
unsigned long ide_pci_dma_base(ide_hwif_t *, const struct ide_port_info *);
-extern const struct ide_dma_ops sff_dma_ops;
int ide_pci_check_simplex(ide_hwif_t *, const struct ide_port_info *);
int ide_hwif_setup_dma(ide_hwif_t *, const struct ide_port_info *);
#else
@@ -1275,6 +1274,7 @@ extern int __ide_dma_end(ide_drive_t *);
int ide_dma_test_irq(ide_drive_t *);
extern void ide_dma_lost_irq(ide_drive_t *);
extern void ide_dma_timeout(ide_drive_t *);
+extern const struct ide_dma_ops sff_dma_ops;
#endif /* CONFIG_BLK_DEV_IDEDMA_SFF */
#else
@@ -1448,8 +1448,7 @@ static inline void ide_dump_identify(u8 *id)
static inline int hwif_to_node(ide_hwif_t *hwif)
{
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- return hwif->dev ? pcibus_to_node(dev->bus) : -1;
+ return hwif->dev ? dev_to_node(hwif->dev) : -1;
}
static inline ide_drive_t *ide_get_paired_drive(ide_drive_t *drive)