summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorSrinivas Neeli <srinivas.neeli@xilinx.com>2021-01-29 19:56:48 +0530
committerBartosz Golaszewski <bgolaszewski@baylibre.com>2021-02-15 11:43:33 +0100
commita32c7caea292c4d1e417eae6e5a348d187546acf (patch)
tree63ff65458cabddcad859f4ea2e097ad2007e1dbe
parent37ef334680800263b32bb96a5156a4b47f0244a2 (diff)
downloadlinux-a32c7caea292c4d1e417eae6e5a348d187546acf.tar.bz2
gpio: gpio-xilinx: Add interrupt support
Adds interrupt support to the Xilinx GPIO driver so that rising and falling edge line events can be supported. Since interrupt support is an optional feature in the Xilinx IP, the driver continues to support devices which have no interrupt provided. Depends on OF_GPIO framework for of_xlate function to translate gpiospec to the GPIO number and flags. Signed-off-by: Robert Hancock <hancock@sedsystems.ca> Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Signed-off-by: Srinivas Neeli <srinivas.neeli@xilinx.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
-rw-r--r--drivers/gpio/Kconfig2
-rw-r--r--drivers/gpio/gpio-xilinx.c246
2 files changed, 244 insertions, 4 deletions
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index a6200a7b4a0e..e3607ec4c2e8 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -704,6 +704,8 @@ config GPIO_XGENE_SB
config GPIO_XILINX
tristate "Xilinx GPIO support"
+ select GPIOLIB_IRQCHIP
+ depends on OF_GPIO
help
Say yes here to support the Xilinx FPGA GPIO device
diff --git a/drivers/gpio/gpio-xilinx.c b/drivers/gpio/gpio-xilinx.c
index f88db56543c2..62deb755f910 100644
--- a/drivers/gpio/gpio-xilinx.c
+++ b/drivers/gpio/gpio-xilinx.c
@@ -10,7 +10,9 @@
#include <linux/errno.h>
#include <linux/gpio/driver.h>
#include <linux/init.h>
+#include <linux/interrupt.h>
#include <linux/io.h>
+#include <linux/irq.h>
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/of_platform.h>
@@ -22,6 +24,11 @@
#define XGPIO_CHANNEL_OFFSET 0x8
+#define XGPIO_GIER_OFFSET 0x11c /* Global Interrupt Enable */
+#define XGPIO_GIER_IE BIT(31)
+#define XGPIO_IPISR_OFFSET 0x120 /* IP Interrupt Status */
+#define XGPIO_IPIER_OFFSET 0x128 /* IP Interrupt Enable */
+
/* Read/Write access to the GPIO registers */
#if defined(CONFIG_ARCH_ZYNQ) || defined(CONFIG_X86)
# define xgpio_readreg(offset) readl(offset)
@@ -36,9 +43,15 @@
* @gc: GPIO chip
* @regs: register block
* @gpio_width: GPIO width for every channel
- * @gpio_state: GPIO state shadow register
+ * @gpio_state: GPIO write state shadow register
+ * @gpio_last_irq_read: GPIO read state register from last interrupt
* @gpio_dir: GPIO direction shadow register
* @gpio_lock: Lock used for synchronization
+ * @irq: IRQ used by GPIO device
+ * @irqchip: IRQ chip
+ * @irq_enable: GPIO IRQ enable/disable bitfield
+ * @irq_rising_edge: GPIO IRQ rising edge enable/disable bitfield
+ * @irq_falling_edge: GPIO IRQ falling edge enable/disable bitfield
* @clk: clock resource for this driver
*/
struct xgpio_instance {
@@ -46,8 +59,14 @@ struct xgpio_instance {
void __iomem *regs;
unsigned int gpio_width[2];
u32 gpio_state[2];
+ u32 gpio_last_irq_read[2];
u32 gpio_dir[2];
spinlock_t gpio_lock; /* For serializing operations */
+ int irq;
+ struct irq_chip irqchip;
+ u32 irq_enable[2];
+ u32 irq_rising_edge[2];
+ u32 irq_falling_edge[2];
struct clk *clk;
};
@@ -277,6 +296,175 @@ static int xgpio_remove(struct platform_device *pdev)
}
/**
+ * xgpio_irq_ack - Acknowledge a child GPIO interrupt.
+ * @irq_data: per IRQ and chip data passed down to chip functions
+ * This currently does nothing, but irq_ack is unconditionally called by
+ * handle_edge_irq and therefore must be defined.
+ */
+static void xgpio_irq_ack(struct irq_data *irq_data)
+{
+}
+
+/**
+ * xgpio_irq_mask - Write the specified signal of the GPIO device.
+ * @irq_data: per IRQ and chip data passed down to chip functions
+ */
+static void xgpio_irq_mask(struct irq_data *irq_data)
+{
+ unsigned long flags;
+ struct xgpio_instance *chip = irq_data_get_irq_chip_data(irq_data);
+ int irq_offset = irqd_to_hwirq(irq_data);
+ int index = xgpio_index(chip, irq_offset);
+ int offset = xgpio_offset(chip, irq_offset);
+
+ spin_lock_irqsave(&chip->gpio_lock, flags);
+
+ chip->irq_enable[index] &= ~BIT(offset);
+
+ if (!chip->irq_enable[index]) {
+ /* Disable per channel interrupt */
+ u32 temp = xgpio_readreg(chip->regs + XGPIO_IPIER_OFFSET);
+
+ temp &= ~BIT(index);
+ xgpio_writereg(chip->regs + XGPIO_IPIER_OFFSET, temp);
+ }
+ spin_unlock_irqrestore(&chip->gpio_lock, flags);
+}
+
+/**
+ * xgpio_irq_unmask - Write the specified signal of the GPIO device.
+ * @irq_data: per IRQ and chip data passed down to chip functions
+ */
+static void xgpio_irq_unmask(struct irq_data *irq_data)
+{
+ unsigned long flags;
+ struct xgpio_instance *chip = irq_data_get_irq_chip_data(irq_data);
+ int irq_offset = irqd_to_hwirq(irq_data);
+ int index = xgpio_index(chip, irq_offset);
+ int offset = xgpio_offset(chip, irq_offset);
+ u32 old_enable = chip->irq_enable[index];
+
+ spin_lock_irqsave(&chip->gpio_lock, flags);
+
+ chip->irq_enable[index] |= BIT(offset);
+
+ if (!old_enable) {
+ /* Clear any existing per-channel interrupts */
+ u32 val = xgpio_readreg(chip->regs + XGPIO_IPISR_OFFSET) &
+ BIT(index);
+
+ if (val)
+ xgpio_writereg(chip->regs + XGPIO_IPISR_OFFSET, val);
+
+ /* Update GPIO IRQ read data before enabling interrupt*/
+ val = xgpio_readreg(chip->regs + XGPIO_DATA_OFFSET +
+ index * XGPIO_CHANNEL_OFFSET);
+ chip->gpio_last_irq_read[index] = val;
+
+ /* Enable per channel interrupt */
+ val = xgpio_readreg(chip->regs + XGPIO_IPIER_OFFSET);
+ val |= BIT(index);
+ xgpio_writereg(chip->regs + XGPIO_IPIER_OFFSET, val);
+ }
+
+ spin_unlock_irqrestore(&chip->gpio_lock, flags);
+}
+
+/**
+ * xgpio_set_irq_type - Write the specified signal of the GPIO device.
+ * @irq_data: Per IRQ and chip data passed down to chip functions
+ * @type: Interrupt type that is to be set for the gpio pin
+ *
+ * Return:
+ * 0 if interrupt type is supported otherwise -EINVAL
+ */
+static int xgpio_set_irq_type(struct irq_data *irq_data, unsigned int type)
+{
+ struct xgpio_instance *chip = irq_data_get_irq_chip_data(irq_data);
+ int irq_offset = irqd_to_hwirq(irq_data);
+ int index = xgpio_index(chip, irq_offset);
+ int offset = xgpio_offset(chip, irq_offset);
+
+ /*
+ * The Xilinx GPIO hardware provides a single interrupt status
+ * indication for any state change in a given GPIO channel (bank).
+ * Therefore, only rising edge or falling edge triggers are
+ * supported.
+ */
+ switch (type & IRQ_TYPE_SENSE_MASK) {
+ case IRQ_TYPE_EDGE_BOTH:
+ chip->irq_rising_edge[index] |= BIT(offset);
+ chip->irq_falling_edge[index] |= BIT(offset);
+ break;
+ case IRQ_TYPE_EDGE_RISING:
+ chip->irq_rising_edge[index] |= BIT(offset);
+ chip->irq_falling_edge[index] &= ~BIT(offset);
+ break;
+ case IRQ_TYPE_EDGE_FALLING:
+ chip->irq_rising_edge[index] &= ~BIT(offset);
+ chip->irq_falling_edge[index] |= BIT(offset);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ irq_set_handler_locked(irq_data, handle_edge_irq);
+ return 0;
+}
+
+/**
+ * xgpio_irqhandler - Gpio interrupt service routine
+ * @desc: Pointer to interrupt description
+ */
+static void xgpio_irqhandler(struct irq_desc *desc)
+{
+ struct xgpio_instance *chip = irq_desc_get_handler_data(desc);
+ struct irq_chip *irqchip = irq_desc_get_chip(desc);
+ u32 num_channels = chip->gpio_width[1] ? 2 : 1;
+ u32 offset = 0, index;
+ u32 status = xgpio_readreg(chip->regs + XGPIO_IPISR_OFFSET);
+
+ xgpio_writereg(chip->regs + XGPIO_IPISR_OFFSET, status);
+
+ chained_irq_enter(irqchip, desc);
+ for (index = 0; index < num_channels; index++) {
+ if ((status & BIT(index))) {
+ unsigned long rising_events, falling_events, all_events;
+ unsigned long flags;
+ u32 data, bit;
+ unsigned int irq;
+
+ spin_lock_irqsave(&chip->gpio_lock, flags);
+ data = xgpio_readreg(chip->regs + XGPIO_DATA_OFFSET +
+ index * XGPIO_CHANNEL_OFFSET);
+ rising_events = data &
+ ~chip->gpio_last_irq_read[index] &
+ chip->irq_enable[index] &
+ chip->irq_rising_edge[index];
+ falling_events = ~data &
+ chip->gpio_last_irq_read[index] &
+ chip->irq_enable[index] &
+ chip->irq_falling_edge[index];
+ dev_dbg(chip->gc.parent,
+ "IRQ chan %u rising 0x%lx falling 0x%lx\n",
+ index, rising_events, falling_events);
+ all_events = rising_events | falling_events;
+ chip->gpio_last_irq_read[index] = data;
+ spin_unlock_irqrestore(&chip->gpio_lock, flags);
+
+ for_each_set_bit(bit, &all_events, 32) {
+ irq = irq_find_mapping(chip->gc.irq.domain,
+ offset + bit);
+ generic_handle_irq(irq);
+ }
+ }
+ offset += chip->gpio_width[index];
+ }
+
+ chained_irq_exit(irqchip, desc);
+}
+
+/**
* xgpio_of_probe - Probe method for the GPIO device.
* @pdev: pointer to the platform device
*
@@ -289,7 +477,10 @@ static int xgpio_probe(struct platform_device *pdev)
struct xgpio_instance *chip;
int status = 0;
struct device_node *np = pdev->dev.of_node;
- u32 is_dual;
+ u32 is_dual = 0;
+ u32 cells = 2;
+ struct gpio_irq_chip *girq;
+ u32 temp;
chip = devm_kzalloc(&pdev->dev, sizeof(*chip), GFP_KERNEL);
if (!chip)
@@ -305,6 +496,15 @@ static int xgpio_probe(struct platform_device *pdev)
if (of_property_read_u32(np, "xlnx,tri-default", &chip->gpio_dir[0]))
chip->gpio_dir[0] = 0xFFFFFFFF;
+ /* Update cells with gpio-cells value */
+ if (of_property_read_u32(np, "#gpio-cells", &cells))
+ dev_dbg(&pdev->dev, "Missing gpio-cells property\n");
+
+ if (cells != 2) {
+ dev_err(&pdev->dev, "#gpio-cells mismatch\n");
+ return -EINVAL;
+ }
+
/*
* Check device node and parent device node for device width
* and assume default width of 32
@@ -343,6 +543,7 @@ static int xgpio_probe(struct platform_device *pdev)
chip->gc.parent = &pdev->dev;
chip->gc.direction_input = xgpio_dir_in;
chip->gc.direction_output = xgpio_dir_out;
+ chip->gc.of_gpio_n_cells = cells;
chip->gc.get = xgpio_get;
chip->gc.set = xgpio_set;
chip->gc.set_multiple = xgpio_set_multiple;
@@ -367,14 +568,51 @@ static int xgpio_probe(struct platform_device *pdev)
xgpio_save_regs(chip);
+ chip->irq = platform_get_irq_optional(pdev, 0);
+ if (chip->irq <= 0)
+ goto skip_irq;
+
+ chip->irqchip.name = "gpio-xilinx";
+ chip->irqchip.irq_ack = xgpio_irq_ack;
+ chip->irqchip.irq_mask = xgpio_irq_mask;
+ chip->irqchip.irq_unmask = xgpio_irq_unmask;
+ chip->irqchip.irq_set_type = xgpio_set_irq_type;
+
+ /* Disable per-channel interrupts */
+ xgpio_writereg(chip->regs + XGPIO_IPIER_OFFSET, 0);
+ /* Clear any existing per-channel interrupts */
+ temp = xgpio_readreg(chip->regs + XGPIO_IPISR_OFFSET);
+ xgpio_writereg(chip->regs + XGPIO_IPISR_OFFSET, temp);
+ /* Enable global interrupts */
+ xgpio_writereg(chip->regs + XGPIO_GIER_OFFSET, XGPIO_GIER_IE);
+
+ girq = &chip->gc.irq;
+ girq->chip = &chip->irqchip;
+ girq->parent_handler = xgpio_irqhandler;
+ girq->num_parents = 1;
+ girq->parents = devm_kcalloc(&pdev->dev, 1,
+ sizeof(*girq->parents),
+ GFP_KERNEL);
+ if (!girq->parents) {
+ status = -ENOMEM;
+ goto err_unprepare_clk;
+ }
+ girq->parents[0] = chip->irq;
+ girq->default_type = IRQ_TYPE_NONE;
+ girq->handler = handle_bad_irq;
+
+skip_irq:
status = devm_gpiochip_add_data(&pdev->dev, &chip->gc, chip);
if (status) {
dev_err(&pdev->dev, "failed to add GPIO chip\n");
- clk_disable_unprepare(chip->clk);
- return status;
+ goto err_unprepare_clk;
}
return 0;
+
+err_unprepare_clk:
+ clk_disable_unprepare(chip->clk);
+ return status;
}
static const struct of_device_id xgpio_of_match[] = {