KVM: PPC: Book3S HV: Work around POWER8 performance monitor bugs

This adds workarounds for two hardware bugs in the POWER8 performance
monitor unit (PMU), both related to interrupt generation.  The effect
of these bugs is that PMU interrupts can get lost, leading to tools
such as perf reporting fewer counts and samples than they should.

The first bug relates to the PMAO (perf. mon. alert occurred) bit in
MMCR0; setting it should cause an interrupt, but doesn't.  The other
bug relates to the PMAE (perf. mon. alert enable) bit in MMCR0.
Setting PMAE when a counter is negative and counter negative
conditions are enabled to cause alerts should cause an alert, but
doesn't.

The workaround for the first bug is to create conditions where a
counter will overflow, whenever we are about to restore a MMCR0
value that has PMAO set (and PMAO_SYNC clear).  The workaround for
the second bug is to freeze all counters using MMCR2 before reading
MMCR0.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

2 files changed, 64 insertions, 7 deletions

diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h
index e5d2e0bc7e03..4852bcf270f3 100644
--- a/arch/powerpc/include/asm/reg.h
+++ b/arch/powerpc/include/asm/reg.h
@@ -670,18 +670,20 @@
 #define   MMCR0_PROBLEM_DISABLE MMCR0_FCP
 #define   MMCR0_FCM1	0x10000000UL /* freeze counters while MSR mark = 1 */
 #define   MMCR0_FCM0	0x08000000UL /* freeze counters while MSR mark = 0 */
-#define   MMCR0_PMXE	0x04000000UL /* performance monitor exception enable */
-#define   MMCR0_FCECE	0x02000000UL /* freeze ctrs on enabled cond or event */
+#define   MMCR0_PMXE	ASM_CONST(0x04000000) /* perf mon exception enable */
+#define   MMCR0_FCECE	ASM_CONST(0x02000000) /* freeze ctrs on enabled cond or event */
 #define   MMCR0_TBEE	0x00400000UL /* time base exception enable */
 #define   MMCR0_BHRBA	0x00200000UL /* BHRB Access allowed in userspace */
 #define   MMCR0_EBE	0x00100000UL /* Event based branch enable */
 #define   MMCR0_PMCC	0x000c0000UL /* PMC control */
 #define   MMCR0_PMCC_U6	0x00080000UL /* PMC1-6 are R/W by user (PR) */
 #define   MMCR0_PMC1CE	0x00008000UL /* PMC1 count enable*/
-#define   MMCR0_PMCjCE	0x00004000UL /* PMCj count enable*/
+#define   MMCR0_PMCjCE	ASM_CONST(0x00004000) /* PMCj count enable*/
 #define   MMCR0_TRIGGER	0x00002000UL /* TRIGGER enable */
-#define   MMCR0_PMAO_SYNC 0x00000800UL /* PMU interrupt is synchronous */
-#define   MMCR0_PMAO	0x00000080UL /* performance monitor alert has occurred, set to 0 after handling exception */
+#define   MMCR0_PMAO_SYNC ASM_CONST(0x00000800) /* PMU intr is synchronous */
+#define   MMCR0_C56RUN	ASM_CONST(0x00000100) /* PMC5/6 count when RUN=0 */
+/* performance monitor alert has occurred, set to 0 after handling exception */
+#define   MMCR0_PMAO	ASM_CONST(0x00000080)
 #define   MMCR0_SHRFC	0x00000040UL /* SHRre freeze conditions between threads */
 #define   MMCR0_FC56	0x00000010UL /* freeze counters 5 and 6 */
 #define   MMCR0_FCTI	0x00000008UL /* freeze counters in tags inactive mode */
diff --git a/arch/powerpc/kvm/book3s_hv_rmhandlers.S b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
index ffbb871c2bd8..60fe8ba318cf 100644
--- a/arch/powerpc/kvm/book3s_hv_rmhandlers.S
+++ b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
@@ -86,6 +86,12 @@ END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_207S)
 	lbz	r4, LPPACA_PMCINUSE(r3)
 	cmpwi	r4, 0
 	beq	23f			/* skip if not */
+BEGIN_FTR_SECTION
+	ld	r3, HSTATE_MMCR(r13)
+	andi.	r4, r3, MMCR0_PMAO_SYNC | MMCR0_PMAO
+	cmpwi	r4, MMCR0_PMAO
+	beql	kvmppc_fix_pmao
+END_FTR_SECTION_IFSET(CPU_FTR_PMAO_BUG)
 	lwz	r3, HSTATE_PMC(r13)
 	lwz	r4, HSTATE_PMC + 4(r13)
 	lwz	r5, HSTATE_PMC + 8(r13)
@@ -726,6 +732,12 @@ skip_tm:
 	sldi	r3, r3, 31		/* MMCR0_FC (freeze counters) bit */
 	mtspr	SPRN_MMCR0, r3		/* freeze all counters, disable ints */
 	isync
+BEGIN_FTR_SECTION
+	ld	r3, VCPU_MMCR(r4)
+	andi.	r5, r3, MMCR0_PMAO_SYNC | MMCR0_PMAO
+	cmpwi	r5, MMCR0_PMAO
+	beql	kvmppc_fix_pmao
+END_FTR_SECTION_IFSET(CPU_FTR_PMAO_BUG)
 	lwz	r3, VCPU_PMC(r4)	/* always load up guest PMU registers */
 	lwz	r5, VCPU_PMC + 4(r4)	/* to prevent information leak */
 	lwz	r6, VCPU_PMC + 8(r4)
@@ -1324,6 +1336,30 @@ END_FTR_SECTION_IFSET(CPU_FTR_ARCH_206)
 25:
 	/* Save PMU registers if requested */
 	/* r8 and cr0.eq are live here */
+BEGIN_FTR_SECTION
+	/*
+	 * POWER8 seems to have a hardware bug where setting
+	 * MMCR0[PMAE] along with MMCR0[PMC1CE] and/or MMCR0[PMCjCE]
+	 * when some counters are already negative doesn't seem
+	 * to cause a performance monitor alert (and hence interrupt).
+	 * The effect of this is that when saving the PMU state,
+	 * if there is no PMU alert pending when we read MMCR0
+	 * before freezing the counters, but one becomes pending
+	 * before we read the counters, we lose it.
+	 * To work around this, we need a way to freeze the counters
+	 * before reading MMCR0.  Normally, freezing the counters
+	 * is done by writing MMCR0 (to set MMCR0[FC]) which
+	 * unavoidably writes MMCR0[PMA0] as well.  On POWER8,
+	 * we can also freeze the counters using MMCR2, by writing
+	 * 1s to all the counter freeze condition bits (there are
+	 * 9 bits each for 6 counters).
+	 */
+	li	r3, -1			/* set all freeze bits */
+	clrrdi	r3, r3, 10
+	mfspr	r10, SPRN_MMCR2
+	mtspr	SPRN_MMCR2, r3
+	isync
+END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S)
 	li	r3, 1
 	sldi	r3, r3, 31		/* MMCR0_FC (freeze counters) bit */
 	mfspr	r4, SPRN_MMCR0		/* save MMCR0 */
@@ -1347,6 +1383,9 @@ END_FTR_SECTION_IFSET(CPU_FTR_ARCH_206)
 	std	r4, VCPU_MMCR(r9)
 	std	r5, VCPU_MMCR + 8(r9)
 	std	r6, VCPU_MMCR + 16(r9)
+BEGIN_FTR_SECTION
+	std	r10, VCPU_MMCR + 24(r9)
+END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S)
 	std	r7, VCPU_SIAR(r9)
 	std	r8, VCPU_SDAR(r9)
 	mfspr	r3, SPRN_PMC1
@@ -1370,12 +1409,10 @@ BEGIN_FTR_SECTION
 	stw	r11, VCPU_PMC + 28(r9)
 END_FTR_SECTION_IFSET(CPU_FTR_ARCH_201)
 BEGIN_FTR_SECTION
-	mfspr	r4, SPRN_MMCR2
 	mfspr	r5, SPRN_SIER
 	mfspr	r6, SPRN_SPMC1
 	mfspr	r7, SPRN_SPMC2
 	mfspr	r8, SPRN_MMCRS
-	std	r4, VCPU_MMCR + 24(r9)
 	std	r5, VCPU_SIER(r9)
 	stw	r6, VCPU_PMC + 24(r9)
 	stw	r7, VCPU_PMC + 28(r9)
@@ -2311,3 +2348,21 @@ kvmppc_msr_interrupt:
 	li	r0, 1
 1:	rldimi	r11, r0, MSR_TS_S_LG, 63 - MSR_TS_T_LG
 	blr
+
+/*
+ * This works around a hardware bug on POWER8E processors, where
+ * writing a 1 to the MMCR0[PMAO] bit doesn't generate a
+ * performance monitor interrupt.  Instead, when we need to have
+ * an interrupt pending, we have to arrange for a counter to overflow.
+ */
+kvmppc_fix_pmao:
+	li	r3, 0
+	mtspr	SPRN_MMCR2, r3
+	lis	r3, (MMCR0_PMXE | MMCR0_FCECE)@h
+	ori	r3, r3, MMCR0_PMCjCE | MMCR0_C56RUN
+	mtspr	SPRN_MMCR0, r3
+	lis	r3, 0x7fff
+	ori	r3, r3, 0xffff
+	mtspr	SPRN_PMC6, r3
+	isync
+	blr