crypto: hisilicon/qm - add MSI detection steps on Kunpeng930

Compared with Kunpeng920, Kunpeng930 adds MSI configuration steps to wait
for the interrupt to be emptied. In order to be compatible with the
kunpeng920 driver, 'set_msi' callback is added in 'hisi_qm_hw_ops' to
configure hardware register. Call 'set_msi' to disable or enable MSI
during reset.

Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

1 files changed, 100 insertions, 24 deletions

diff --git a/drivers/crypto/hisilicon/qm.c b/drivers/crypto/hisilicon/qm.c
index c671f9433716..a7cd314073c2 100644
--- a/drivers/crypto/hisilicon/qm.c
+++ b/drivers/crypto/hisilicon/qm.c
@@ -161,6 +161,9 @@
 #define QM_PEH_VENDOR_ID		0x1000d8
 #define ACC_VENDOR_ID_VALUE		0x5a5a
 #define QM_PEH_DFX_INFO0		0x1000fc
+#define QM_PEH_DFX_INFO1		0x100100
+#define QM_PEH_DFX_MASK			(BIT(0) | BIT(2))
+#define QM_PEH_MSI_FINISH_MASK		GENMASK(19, 16)
 #define ACC_PEH_SRIOV_CTRL_VF_MSE_SHIFT	3
 #define ACC_PEH_MSI_DISABLE		GENMASK(31, 0)
 #define ACC_MASTER_GLOBAL_CTRL_SHUTDOWN	0x1
@@ -171,6 +174,7 @@
 #define QM_RAS_NFE_MBIT_DISABLE		~QM_ECC_MBIT
 #define ACC_AM_ROB_ECC_INT_STS		0x300104
 #define ACC_ROB_ECC_ERR_MULTPL		BIT(1)
+#define QM_MSI_CAP_ENABLE		BIT(16)
 
 #define QM_DFX_MB_CNT_VF		0x104010
 #define QM_DFX_DB_CNT_VF		0x104020
@@ -352,6 +356,7 @@ struct hisi_qm_hw_ops {
 	void (*hw_error_uninit)(struct hisi_qm *qm);
 	enum acc_err_result (*hw_error_handle)(struct hisi_qm *qm);
 	int (*stop_qp)(struct hisi_qp *qp);
+	int (*set_msi)(struct hisi_qm *qm, bool set);
 };
 
 struct qm_dfx_item {
@@ -1776,10 +1781,98 @@ static int qm_stop_qp(struct hisi_qp *qp)
 	return qm_mb(qp->qm, QM_MB_CMD_STOP_QP, 0, qp->qp_id, 0);
 }
 
+static int qm_set_msi(struct hisi_qm *qm, bool set)
+{
+	struct pci_dev *pdev = qm->pdev;
+
+	if (set) {
+		pci_write_config_dword(pdev, pdev->msi_cap + PCI_MSI_MASK_64,
+				       0);
+	} else {
+		pci_write_config_dword(pdev, pdev->msi_cap + PCI_MSI_MASK_64,
+				       ACC_PEH_MSI_DISABLE);
+		if (qm->err_status.is_qm_ecc_mbit ||
+		    qm->err_status.is_dev_ecc_mbit)
+			return 0;
+
+		mdelay(1);
+		if (readl(qm->io_base + QM_PEH_DFX_INFO0))
+			return -EFAULT;
+	}
+
+	return 0;
+}
+
+static void qm_wait_msi_finish(struct hisi_qm *qm)
+{
+	struct pci_dev *pdev = qm->pdev;
+	u32 cmd = ~0;
+	int cnt = 0;
+	u32 val;
+	int ret;
+
+	while (true) {
+		pci_read_config_dword(pdev, pdev->msi_cap +
+				      PCI_MSI_PENDING_64, &cmd);
+		if (!cmd)
+			break;
+
+		if (++cnt > MAX_WAIT_COUNTS) {
+			pci_warn(pdev, "failed to empty MSI PENDING!\n");
+			break;
+		}
+
+		udelay(1);
+	}
+
+	ret = readl_relaxed_poll_timeout(qm->io_base + QM_PEH_DFX_INFO0,
+					 val, !(val & QM_PEH_DFX_MASK),
+					 POLL_PERIOD, POLL_TIMEOUT);
+	if (ret)
+		pci_warn(pdev, "failed to empty PEH MSI!\n");
+
+	ret = readl_relaxed_poll_timeout(qm->io_base + QM_PEH_DFX_INFO1,
+					 val, !(val & QM_PEH_MSI_FINISH_MASK),
+					 POLL_PERIOD, POLL_TIMEOUT);
+	if (ret)
+		pci_warn(pdev, "failed to finish MSI operation!\n");
+}
+
+static int qm_set_msi_v3(struct hisi_qm *qm, bool set)
+{
+	struct pci_dev *pdev = qm->pdev;
+	int ret = -ETIMEDOUT;
+	u32 cmd, i;
+
+	pci_read_config_dword(pdev, pdev->msi_cap, &cmd);
+	if (set)
+		cmd |= QM_MSI_CAP_ENABLE;
+	else
+		cmd &= ~QM_MSI_CAP_ENABLE;
+
+	pci_write_config_dword(pdev, pdev->msi_cap, cmd);
+	if (set) {
+		for (i = 0; i < MAX_WAIT_COUNTS; i++) {
+			pci_read_config_dword(pdev, pdev->msi_cap, &cmd);
+			if (cmd & QM_MSI_CAP_ENABLE)
+				return 0;
+
+			udelay(1);
+		}
+	} else {
+		udelay(WAIT_PERIOD_US_MIN);
+		qm_wait_msi_finish(qm);
+		ret = 0;
+	}
+
+	return ret;
+}
+
 static const struct hisi_qm_hw_ops qm_hw_ops_v1 = {
 	.qm_db = qm_db_v1,
 	.get_irq_num = qm_get_irq_num_v1,
 	.hw_error_init = qm_hw_error_init_v1,
+	.set_msi = qm_set_msi,
 };
 
 static const struct hisi_qm_hw_ops qm_hw_ops_v2 = {
@@ -1789,6 +1882,7 @@ static const struct hisi_qm_hw_ops qm_hw_ops_v2 = {
 	.hw_error_init = qm_hw_error_init_v2,
 	.hw_error_uninit = qm_hw_error_uninit_v2,
 	.hw_error_handle = qm_hw_error_handle_v2,
+	.set_msi = qm_set_msi,
 };
 
 static const struct hisi_qm_hw_ops qm_hw_ops_v3 = {
@@ -1799,6 +1893,7 @@ static const struct hisi_qm_hw_ops qm_hw_ops_v3 = {
 	.hw_error_uninit = qm_hw_error_uninit_v3,
 	.hw_error_handle = qm_hw_error_handle_v2,
 	.stop_qp = qm_stop_qp,
+	.set_msi = qm_set_msi_v3,
 };
 
 static void *qm_get_avail_sqe(struct hisi_qp *qp)
@@ -3586,6 +3681,9 @@ static int qm_check_req_recv(struct hisi_qm *qm)
 	int ret;
 	u32 val;
 
+	if (qm->ver >= QM_HW_V3)
+		return 0;
+
 	writel(ACC_VENDOR_ID_VALUE, qm->io_base + QM_PEH_VENDOR_ID);
 	ret = readl_relaxed_poll_timeout(qm->io_base + QM_PEH_VENDOR_ID, val,
 					 (val == ACC_VENDOR_ID_VALUE),
@@ -3656,28 +3754,6 @@ static int qm_set_vf_mse(struct hisi_qm *qm, bool set)
 	return -ETIMEDOUT;
 }
 
-static int qm_set_msi(struct hisi_qm *qm, bool set)
-{
-	struct pci_dev *pdev = qm->pdev;
-
-	if (set) {
-		pci_write_config_dword(pdev, pdev->msi_cap + PCI_MSI_MASK_64,
-				       0);
-	} else {
-		pci_write_config_dword(pdev, pdev->msi_cap + PCI_MSI_MASK_64,
-				       ACC_PEH_MSI_DISABLE);
-		if (qm->err_status.is_qm_ecc_mbit ||
-		    qm->err_status.is_dev_ecc_mbit)
-			return 0;
-
-		mdelay(1);
-		if (readl(qm->io_base + QM_PEH_DFX_INFO0))
-			return -EFAULT;
-	}
-
-	return 0;
-}
-
 static int qm_vf_reset_prepare(struct hisi_qm *qm,
 			       enum qm_stop_reason stop_reason)
 {
@@ -3800,7 +3876,7 @@ static int qm_soft_reset(struct hisi_qm *qm)
 		}
 	}
 
-	ret = qm_set_msi(qm, false);
+	ret = qm->ops->set_msi(qm, false);
 	if (ret) {
 		pci_err(pdev, "Fails to disable PEH MSI bit.\n");
 		return ret;
@@ -3941,7 +4017,7 @@ static int qm_controller_reset_done(struct hisi_qm *qm)
 	struct pci_dev *pdev = qm->pdev;
 	int ret;
 
-	ret = qm_set_msi(qm, true);
+	ret = qm->ops->set_msi(qm, true);
 	if (ret) {
 		pci_err(pdev, "Fails to enable PEH MSI bit!\n");
 		return ret;