ARM: dts: rockchip: A few fixes for veyron-{fievel,tiger}

Fix/improve a few things for veyron fievel/tiger:

- move 'vccsys' regulator from tiger to fievel, both boards
  have it (and tiger includes the fievel .dtsi)
- move 'ext_gmac' node below regulators
- fix GPIO ids of vcc5_host1 and vcc5_host2 regulators
- remove reset configuration from 'gmac' node, this is already done
  in rk3288.dtsi
- fixed style issues of some multi-line comments
- switch 'vcc18_lcdt', 'vdd10_lcd' and 'vcc33_ccd' regulators off
  during suspend
- no pull-up on the Bluetooth wake-up pin, there is an external
  pull-up. The signal is active low, add the 'bt_host_wake_l'
  pinctrl config
- move BC 1.2 pins up in the pinctrl config to keep 'wake only' pins
  separate
- add BC 1.2 pins to sleep config

Fixes: 0067692b662e ("ARM: dts: rockchip: add veyron-fievel board")
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

3 files changed, 38 insertions, 31 deletions

diff --git a/arch/arm/boot/dts/rk3288-veyron-fievel.dts b/arch/arm/boot/dts/rk3288-veyron-fievel.dts
index 696566f72d30..65d029ccc907 100644
--- a/arch/arm/boot/dts/rk3288-veyron-fievel.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-fievel.dts
@@ -20,11 +20,11 @@
 
 	/delete-node/ bt-activity;
 
-	ext_gmac: external-gmac-clock {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <125000000>;
-		clock-output-names = "ext_gmac";
+	vccsys: vccsys {
+		compatible = "regulator-fixed";
+		regulator-name = "vccsys";
+		regulator-boot-on;
+		regulator-always-on;
 	};
 
 	/*
@@ -41,7 +41,7 @@
 	vcc5_host1: vcc5-host1-regulator {
 		compatible = "regulator-fixed";
 		enable-active-high;
-		gpio = <&gpio5 RK_PC1 GPIO_ACTIVE_HIGH>;
+		gpio = <&gpio5 RK_PC2 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&hub_usb1_pwr_en>;
 		regulator-name = "vcc5_host1";
@@ -52,7 +52,7 @@
 	vcc5_host2: vcc5-host2-regulator {
 		compatible = "regulator-fixed";
 		enable-active-high;
-		gpio = <&gpio5 RK_PC2 GPIO_ACTIVE_HIGH>;
+		gpio = <&gpio5 RK_PB6 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&hub_usb2_pwr_en>;
 		regulator-name = "vcc5_host2";
@@ -70,6 +70,13 @@
 		regulator-always-on;
 		regulator-boot-on;
 	};
+
+	ext_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <125000000>;
+		clock-output-names = "ext_gmac";
+	};
 };
 
 &gmac {
@@ -83,13 +90,13 @@
 	phy-supply = <&vcc33_lan>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&rgmii_pins>, <&phy_rst>, <&phy_pmeb>, <&phy_int>;
-	resets = <&cru SRST_MAC>;
-	reset-names = "stmmaceth";
 	rx_delay = <0x10>;
 	tx_delay = <0x30>;
 
-	/* Reset for the RTL8211 PHY which requires a 10-ms reset pulse (low)
-	 * with a 30ms settling time. */
+	/*
+	 * Reset for the RTL8211 PHY which requires a 10-ms reset pulse (low)
+	 * with a 30ms settling time.
+	 */
 	snps,reset-gpio = <&gpio4 RK_PB0 0>;
 	snps,reset-active-low;
 	snps,reset-delays-us = <0 10000 30000>;
@@ -120,7 +127,8 @@
 	regulators {
 		/delete-node/ LDO_REG1;
 
-		/* According to the schematic, vcc18_lcdt is for
+		/*
+		 * According to the schematic, vcc18_lcdt is for
 		 * HDMI_AVDD_1V8
 		 */
 		vcc18_lcdt: LDO_REG2 {
@@ -130,12 +138,12 @@
 			regulator-max-microvolt = <1800000>;
 			regulator-name = "vdd18_lcdt";
 			regulator-state-mem {
-				regulator-on-in-suspend;
-				regulator-suspend-microvolt = <1800000>;
+				regulator-off-in-suspend;
 			};
 		};
 
-		/* This is not a pwren anymore, but the real power supply,
+		/*
+		 * This is not a pwren anymore, but the real power supply,
 		 * vdd10_lcd for HDMI_AVDD_1V0
 		 */
 		vdd10_lcd: LDO_REG7 {
@@ -145,8 +153,7 @@
 			regulator-max-microvolt = <1000000>;
 			regulator-name = "vdd10_lcd";
 			regulator-state-mem {
-				regulator-on-in-suspend;
-				regulator-suspend-microvolt = <1000000>;
+				regulator-off-in-suspend;
 			};
 		};
 
@@ -158,8 +165,7 @@
 			regulator-max-microvolt = <3300000>;
 			regulator-name = "vcc33_ccd";
 			regulator-state-mem {
-				regulator-on-in-suspend;
-				regulator-suspend-microvolt = <3300000>;
+				regulator-off-in-suspend;
 			};
 		};
 
@@ -180,7 +186,7 @@
 		interrupts = <RK_PD7 IRQ_TYPE_LEVEL_LOW>;
 		marvell,wakeup-pin = /bits/ 16 <13>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&bt_host_wake>;
+		pinctrl-0 = <&bt_host_wake_l>;
 	};
 };
 
@@ -206,13 +212,13 @@
 		&ddrio_pwroff
 		&global_pwroff
 
-		/* Wake only */
-		&bt_dev_wake_awake
-		&pwr_led1_on
-
 		/* For usb bc1.2 */
 		&usb_otg_ilim_sel
 		&usb_usb_ilim_sel
+
+		/* Wake only */
+		&bt_dev_wake_awake
+		&pwr_led1_on
 	>;
 
 	pinctrl-1 = <
@@ -221,6 +227,10 @@
 		&ddrio_pwroff
 		&global_pwroff
 
+		/* For usb bc1.2 */
+		&usb_otg_ilim_sel
+		&usb_usb_ilim_sel
+
 		/* Sleep only */
 		&bt_dev_wake_sleep
 		&pwr_led1_blink
diff --git a/arch/arm/boot/dts/rk3288-veyron-tiger.dts b/arch/arm/boot/dts/rk3288-veyron-tiger.dts
index fae26d530841..27557203ae33 100644
--- a/arch/arm/boot/dts/rk3288-veyron-tiger.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-tiger.dts
@@ -19,13 +19,6 @@
 		     "google,veyron", "rockchip,rk3288";
 
 	/delete-node/ vcc18-lcd;
-
-	vccsys: vccsys {
-		compatible = "regulator-fixed";
-		regulator-name = "vccsys";
-		regulator-boot-on;
-		regulator-always-on;
-	};
 };
 
 &backlight {
diff --git a/arch/arm/boot/dts/rk3288-veyron.dtsi b/arch/arm/boot/dts/rk3288-veyron.dtsi
index 8fc8eac699bf..7525e3dd1fc1 100644
--- a/arch/arm/boot/dts/rk3288-veyron.dtsi
+++ b/arch/arm/boot/dts/rk3288-veyron.dtsi
@@ -586,6 +586,10 @@
 			rockchip,pins = <4 RK_PD7 RK_FUNC_GPIO &pcfg_pull_down>;
 		};
 
+		bt_host_wake_l: bt-host-wake-l {
+			rockchip,pins = <4 RK_PD7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
 		/*
 		 * We run sdio0 at max speed; bump up drive strength.
 		 * We also have external pulls, so disable the internal ones.