diff options
author | Tony Lindgren <tony@atomide.com> | 2005-09-07 17:20:26 +0100 |
---|---|---|
committer | Russell King <rmk+kernel@arm.linux.org.uk> | 2005-09-07 17:20:26 +0100 |
commit | 92105bb70634abacc08bbe12bf6f888fbd7dad38 (patch) | |
tree | 194e3032671ee3a90644c68cda8ddf471cb09d0e | |
parent | 7efb833d645d10258e32664404354d26cf6070e3 (diff) | |
download | linux-92105bb70634abacc08bbe12bf6f888fbd7dad38.tar.bz2 |
[ARM] 2887/1: OMAP 2/4: Update files common to omap1 and omap2, take 2
Patch from Tony Lindgren
This patch syncs the mainline kernel with linux-omap tree.
The highlights of the patch are:
- Clock updates by Tuukka Tikkanen, Juha Yrjola,
Daniel Petrini and Tony Lindgren
- DMA fixes by Imre Deak, Juha Yrjola and Daniel Petrini
- Add support to dual-mode hardware timers by Lauri Leukkunen
- GPIO support for 24xx by Paul Mundt
- GPIO wake-up support by Tony Lindgren
- Better GPIO interrupt handler to not lose interrupts by
Ralph Walden and Ladislav Michl
- Power Management updates by Tuukka Tikkanen
- Make Power Management code use new SRAM functions by
Tony Lindgren
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-rw-r--r-- | arch/arm/plat-omap/Kconfig | 16 | ||||
-rw-r--r-- | arch/arm/plat-omap/Makefile | 4 | ||||
-rw-r--r-- | arch/arm/plat-omap/clock.c | 39 | ||||
-rw-r--r-- | arch/arm/plat-omap/common.c | 7 | ||||
-rw-r--r-- | arch/arm/plat-omap/dma.c | 25 | ||||
-rw-r--r-- | arch/arm/plat-omap/dmtimer.c | 260 | ||||
-rw-r--r-- | arch/arm/plat-omap/gpio.c | 524 | ||||
-rw-r--r-- | arch/arm/plat-omap/mcbsp.c | 9 | ||||
-rw-r--r-- | arch/arm/plat-omap/mux.c | 3 | ||||
-rw-r--r-- | arch/arm/plat-omap/ocpi.c | 1 | ||||
-rw-r--r-- | arch/arm/plat-omap/pm.c | 255 | ||||
-rw-r--r-- | arch/arm/plat-omap/sleep.S | 83 | ||||
-rw-r--r-- | arch/arm/plat-omap/sram-fn.S | 58 | ||||
-rw-r--r-- | arch/arm/plat-omap/sram.c | 116 | ||||
-rw-r--r-- | arch/arm/plat-omap/sram.h | 21 | ||||
-rw-r--r-- | arch/arm/plat-omap/usb.c | 1 |
16 files changed, 1115 insertions, 307 deletions
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig index 345365852f8c..9693e9b4ffd1 100644 --- a/arch/arm/plat-omap/Kconfig +++ b/arch/arm/plat-omap/Kconfig @@ -91,6 +91,13 @@ config OMAP_32K_TIMER_HZ Kernel internal timer frequency should be a divisor of 32768, such as 64 or 128. +config OMAP_DM_TIMER + bool "Use dual-mode timer" + default n + depends on ARCH_OMAP16XX + help + Select this option if you want to use OMAP Dual-Mode timers. + choice prompt "Low-level debug console UART" depends on ARCH_OMAP @@ -107,6 +114,15 @@ config OMAP_LL_DEBUG_UART3 endchoice +config OMAP_SERIAL_WAKE + bool "Enable wake-up events for serial ports" + depends OMAP_MUX + default y + help + Select this option if you want to have your system wake up + to data on the serial RX line. This allows you to wake the + system from serial console. + endmenu endif diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile index 531e11af54d4..7e144f9cad1c 100644 --- a/arch/arm/plat-omap/Makefile +++ b/arch/arm/plat-omap/Makefile @@ -3,7 +3,7 @@ # # Common support -obj-y := common.o dma.o clock.o mux.o gpio.o mcbsp.o usb.o +obj-y := common.o sram.o sram-fn.o clock.o dma.o mux.o gpio.o mcbsp.o usb.o obj-m := obj-n := obj- := @@ -15,3 +15,5 @@ obj-$(CONFIG_ARCH_OMAP16XX) += ocpi.o obj-$(CONFIG_PM) += pm.o sleep.o obj-$(CONFIG_CPU_FREQ) += cpu-omap.o +obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o + diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c index 59d91b3262ba..52a58b2da288 100644 --- a/arch/arm/plat-omap/clock.c +++ b/arch/arm/plat-omap/clock.c @@ -21,6 +21,7 @@ #include <asm/arch/usb.h> #include "clock.h" +#include "sram.h" static LIST_HEAD(clocks); static DECLARE_MUTEX(clocks_sem); @@ -141,7 +142,7 @@ static struct clk arm_ck = { static struct clk armper_ck = { .name = "armper_ck", .parent = &ck_dpll1, - .flags = CLOCK_IN_OMAP730 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | + .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | RATE_CKCTL, .enable_reg = ARM_IDLECT2, .enable_bit = EN_PERCK, @@ -385,7 +386,8 @@ static struct clk uart2_ck = { .name = "uart2_ck", /* Direct from ULPD, no parent */ .rate = 12000000, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | ENABLE_REG_32BIT, + .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | ENABLE_REG_32BIT | + ALWAYS_ENABLED, .enable_reg = MOD_CONF_CTRL_0, .enable_bit = 30, /* Chooses between 12MHz and 48MHz */ .set_rate = &set_uart_rate, @@ -443,6 +445,15 @@ static struct clk usb_hhc_ck16xx = { .enable_bit = 8 /* UHOST_EN */, }; +static struct clk usb_dc_ck = { + .name = "usb_dc_ck", + /* Direct from ULPD, no parent */ + .rate = 48000000, + .flags = CLOCK_IN_OMAP16XX | RATE_FIXED, + .enable_reg = SOFT_REQ_REG, + .enable_bit = 4, +}; + static struct clk mclk_1510 = { .name = "mclk", /* Direct from ULPD, no parent. May be enabled by ext hardware. */ @@ -552,6 +563,7 @@ static struct clk * onchip_clks[] = { &uart3_16xx, &usb_clko, &usb_hhc_ck1510, &usb_hhc_ck16xx, + &usb_dc_ck, &mclk_1510, &mclk_16xx, &bclk_1510, &bclk_16xx, &mmc1_ck, @@ -946,14 +958,13 @@ static int select_table_rate(struct clk * clk, unsigned long rate) if (!ptr->rate) return -EINVAL; - if (!ptr->rate) - return -EINVAL; + /* + * In most cases we should not need to reprogram DPLL. + * Reprogramming the DPLL is tricky, it must be done from SRAM. + */ + omap_sram_reprogram_clock(ptr->dpllctl_val, ptr->ckctl_val); - if (unlikely(ck_dpll1.rate == 0)) { - omap_writew(ptr->dpllctl_val, DPLL_CTL); - ck_dpll1.rate = ptr->pll_rate; - } - omap_writew(ptr->ckctl_val, ARM_CKCTL); + ck_dpll1.rate = ptr->pll_rate; propagate_rate(&ck_dpll1); return 0; } @@ -1224,9 +1235,11 @@ int __init clk_init(void) #endif /* Cache rates for clocks connected to ck_ref (not dpll1) */ propagate_rate(&ck_ref); - printk(KERN_INFO "Clocking rate (xtal/DPLL1/MPU): %ld.%01ld/%ld/%ld MHz\n", + printk(KERN_INFO "Clocking rate (xtal/DPLL1/MPU): " + "%ld.%01ld/%ld.%01ld/%ld.%01ld MHz\n", ck_ref.rate / 1000000, (ck_ref.rate / 100000) % 10, - ck_dpll1.rate, arm_ck.rate); + ck_dpll1.rate / 1000000, (ck_dpll1.rate / 100000) % 10, + arm_ck.rate / 1000000, (arm_ck.rate / 100000) % 10); #ifdef CONFIG_MACH_OMAP_PERSEUS2 /* Select slicer output as OMAP input clock */ @@ -1271,7 +1284,9 @@ static int __init omap_late_clk_reset(void) struct clk *p; __u32 regval32; - omap_writew(0, SOFT_REQ_REG); + /* USB_REQ_EN will be disabled later if necessary (usb_dc_ck) */ + regval32 = omap_readw(SOFT_REQ_REG) & (1 << 4); + omap_writew(regval32, SOFT_REQ_REG); omap_writew(0, SOFT_REQ_REG2); list_for_each_entry(p, &clocks, node) { diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c index ea967a8f6ce5..6cb20aea7f51 100644 --- a/arch/arm/plat-omap/common.c +++ b/arch/arm/plat-omap/common.c @@ -26,6 +26,7 @@ #include <asm/hardware/clock.h> #include <asm/io.h> #include <asm/mach-types.h> +#include <asm/setup.h> #include <asm/arch/board.h> #include <asm/arch/mux.h> @@ -35,11 +36,11 @@ #define NO_LENGTH_CHECK 0xffffffff -extern int omap_bootloader_tag_len; -extern u8 omap_bootloader_tag[]; +unsigned char omap_bootloader_tag[512]; +int omap_bootloader_tag_len; struct omap_board_config_kernel *omap_board_config; -int omap_board_config_size = 0; +int omap_board_config_size; static const void *get_config(u16 tag, size_t len, int skip, size_t *len_out) { diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index c0a5c2fa42bd..da7b65145658 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -425,7 +425,7 @@ static int dma_handle_ch(int ch) dma_chan[ch + 6].saved_csr = csr >> 7; csr &= 0x7f; } - if (!csr) + if ((csr & 0x3f) == 0) return 0; if (unlikely(dma_chan[ch].dev_id == -1)) { printk(KERN_WARNING "Spurious interrupt from DMA channel %d (CSR %04x)\n", @@ -890,11 +890,11 @@ void omap_enable_lcd_dma(void) w |= 1 << 8; omap_writew(w, OMAP1610_DMA_LCD_CTRL); + lcd_dma.active = 1; + w = omap_readw(OMAP1610_DMA_LCD_CCR); w |= 1 << 7; omap_writew(w, OMAP1610_DMA_LCD_CCR); - - lcd_dma.active = 1; } void omap_setup_lcd_dma(void) @@ -965,8 +965,8 @@ void omap_clear_dma(int lch) */ dma_addr_t omap_get_dma_src_pos(int lch) { - return (dma_addr_t) (OMAP_DMA_CSSA_L(lch) | - (OMAP_DMA_CSSA_U(lch) << 16)); + return (dma_addr_t) (omap_readw(OMAP_DMA_CSSA_L(lch)) | + (omap_readw(OMAP_DMA_CSSA_U(lch)) << 16)); } /* @@ -979,8 +979,18 @@ dma_addr_t omap_get_dma_src_pos(int lch) */ dma_addr_t omap_get_dma_dst_pos(int lch) { - return (dma_addr_t) (OMAP_DMA_CDSA_L(lch) | - (OMAP_DMA_CDSA_U(lch) << 16)); + return (dma_addr_t) (omap_readw(OMAP_DMA_CDSA_L(lch)) | + (omap_readw(OMAP_DMA_CDSA_U(lch)) << 16)); +} + +/* + * Returns current source transfer counting for the given DMA channel. + * Can be used to monitor the progress of a transfer inside a block. + * It must be called with disabled interrupts. + */ +int omap_get_dma_src_addr_counter(int lch) +{ + return (dma_addr_t) omap_readw(OMAP_DMA_CSAC(lch)); } int omap_dma_running(void) @@ -1076,6 +1086,7 @@ arch_initcall(omap_init_dma); EXPORT_SYMBOL(omap_get_dma_src_pos); EXPORT_SYMBOL(omap_get_dma_dst_pos); +EXPORT_SYMBOL(omap_get_dma_src_addr_counter); EXPORT_SYMBOL(omap_clear_dma); EXPORT_SYMBOL(omap_set_dma_priority); EXPORT_SYMBOL(omap_request_dma); diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c new file mode 100644 index 000000000000..a1468d7326eb --- /dev/null +++ b/arch/arm/plat-omap/dmtimer.c @@ -0,0 +1,260 @@ +/* + * linux/arch/arm/plat-omap/dmtimer.c + * + * OMAP Dual-Mode Timers + * + * Copyright (C) 2005 Nokia Corporation + * Author: Lauri Leukkunen <lauri.leukkunen@nokia.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/init.h> +#include <asm/arch/hardware.h> +#include <asm/arch/dmtimer.h> +#include <asm/io.h> +#include <asm/arch/irqs.h> +#include <linux/spinlock.h> +#include <linux/list.h> + +#define OMAP_TIMER_COUNT 8 + +#define OMAP_TIMER_ID_REG 0x00 +#define OMAP_TIMER_OCP_CFG_REG 0x10 +#define OMAP_TIMER_SYS_STAT_REG 0x14 +#define OMAP_TIMER_STAT_REG 0x18 +#define OMAP_TIMER_INT_EN_REG 0x1c +#define OMAP_TIMER_WAKEUP_EN_REG 0x20 +#define OMAP_TIMER_CTRL_REG 0x24 +#define OMAP_TIMER_COUNTER_REG 0x28 +#define OMAP_TIMER_LOAD_REG 0x2c +#define OMAP_TIMER_TRIGGER_REG 0x30 +#define OMAP_TIMER_WRITE_PEND_REG 0x34 +#define OMAP_TIMER_MATCH_REG 0x38 +#define OMAP_TIMER_CAPTURE_REG 0x3c +#define OMAP_TIMER_IF_CTRL_REG 0x40 + + +static struct dmtimer_info_struct { + struct list_head unused_timers; + struct list_head reserved_timers; +} dm_timer_info; + +static struct omap_dm_timer dm_timers[] = { + { .base=0xfffb1400, .irq=INT_1610_GPTIMER1 }, + { .base=0xfffb1c00, .irq=INT_1610_GPTIMER2 }, + { .base=0xfffb2400, .irq=INT_1610_GPTIMER3 }, + { .base=0xfffb2c00, .irq=INT_1610_GPTIMER4 }, + { .base=0xfffb3400, .irq=INT_1610_GPTIMER5 }, + { .base=0xfffb3c00, .irq=INT_1610_GPTIMER6 }, + { .base=0xfffb4400, .irq=INT_1610_GPTIMER7 }, + { .base=0xfffb4c00, .irq=INT_1610_GPTIMER8 }, + { .base=0x0 }, +}; + + +static spinlock_t dm_timer_lock; + + +inline void omap_dm_timer_write_reg(struct omap_dm_timer *timer, int reg, u32 value) +{ + omap_writel(value, timer->base + reg); + while (omap_dm_timer_read_reg(timer, OMAP_TIMER_WRITE_PEND_REG)) + ; +} + +u32 omap_dm_timer_read_reg(struct omap_dm_timer *timer, int reg) +{ + return omap_readl(timer->base + reg); +} + +int omap_dm_timers_active(void) +{ + struct omap_dm_timer *timer; + + for (timer = &dm_timers[0]; timer->base; ++timer) + if (omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG) & + OMAP_TIMER_CTRL_ST) + return 1; + + return 0; +} + + +void omap_dm_timer_set_source(struct omap_dm_timer *timer, int source) +{ + int n = (timer - dm_timers) << 1; + u32 l; + + l = omap_readl(MOD_CONF_CTRL_1) & ~(0x03 << n); + l |= source << n; + omap_writel(l, MOD_CONF_CTRL_1); +} + + +static void omap_dm_timer_reset(struct omap_dm_timer *timer) +{ + /* Reset and set posted mode */ + omap_dm_timer_write_reg(timer, OMAP_TIMER_IF_CTRL_REG, 0x06); + omap_dm_timer_write_reg(timer, OMAP_TIMER_OCP_CFG_REG, 0x02); + + omap_dm_timer_set_source(timer, OMAP_TIMER_SRC_ARMXOR); +} + + + +struct omap_dm_timer * omap_dm_timer_request(void) +{ + struct omap_dm_timer *timer = NULL; + unsigned long flags; + + spin_lock_irqsave(&dm_timer_lock, flags); + if (!list_empty(&dm_timer_info.unused_timers)) { + timer = (struct omap_dm_timer *) + dm_timer_info.unused_timers.next; + list_move_tail((struct list_head *)timer, + &dm_timer_info.reserved_timers); + } + spin_unlock_irqrestore(&dm_timer_lock, flags); + + return timer; +} + + +void omap_dm_timer_free(struct omap_dm_timer *timer) +{ + unsigned long flags; + + omap_dm_timer_reset(timer); + + spin_lock_irqsave(&dm_timer_lock, flags); + list_move_tail((struct list_head *)timer, &dm_timer_info.unused_timers); + spin_unlock_irqrestore(&dm_timer_lock, flags); +} + +void omap_dm_timer_set_int_enable(struct omap_dm_timer *timer, + unsigned int value) +{ + omap_dm_timer_write_reg(timer, OMAP_TIMER_INT_EN_REG, value); +} + +unsigned int omap_dm_timer_read_status(struct omap_dm_timer *timer) +{ + return omap_dm_timer_read_reg(timer, OMAP_TIMER_STAT_REG); +} + +void omap_dm_timer_write_status(struct omap_dm_timer *timer, unsigned int value) +{ + omap_dm_timer_write_reg(timer, OMAP_TIMER_STAT_REG, value); +} + +void omap_dm_timer_enable_autoreload(struct omap_dm_timer *timer) +{ + u32 l; + l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG); + l |= OMAP_TIMER_CTRL_AR; + omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l); +} + +void omap_dm_timer_trigger(struct omap_dm_timer *timer) +{ + omap_dm_timer_write_reg(timer, OMAP_TIMER_TRIGGER_REG, 1); +} + +void omap_dm_timer_set_trigger(struct omap_dm_timer *timer, unsigned int value) +{ + u32 l; + + l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG); + l |= value & 0x3; + omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l); +} + +void omap_dm_timer_start(struct omap_dm_timer *timer) +{ + u32 l; + + l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG); + l |= OMAP_TIMER_CTRL_ST; + omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l); +} + +void omap_dm_timer_stop(struct omap_dm_timer *timer) +{ + u32 l; + + l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG); + l &= ~0x1; + omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l); +} + +unsigned int omap_dm_timer_read_counter(struct omap_dm_timer *timer) +{ + return omap_dm_timer_read_reg(timer, OMAP_TIMER_COUNTER_REG); +} + +void omap_dm_timer_reset_counter(struct omap_dm_timer *timer) +{ + omap_dm_timer_write_reg(timer, OMAP_TIMER_COUNTER_REG, 0); +} + +void omap_dm_timer_set_load(struct omap_dm_timer *timer, unsigned int load) +{ + omap_dm_timer_write_reg(timer, OMAP_TIMER_LOAD_REG, load); +} + +void omap_dm_timer_set_match(struct omap_dm_timer *timer, unsigned int match) +{ + omap_dm_timer_write_reg(timer, OMAP_TIMER_MATCH_REG, match); +} + +void omap_dm_timer_enable_compare(struct omap_dm_timer *timer) +{ + u32 l; + + l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG); + l |= OMAP_TIMER_CTRL_CE; + omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l); +} + + +static inline void __dm_timer_init(void) +{ + struct omap_dm_timer *timer; + + spin_lock_init(&dm_timer_lock); + INIT_LIST_HEAD(&dm_timer_info.unused_timers); + INIT_LIST_HEAD(&dm_timer_info.reserved_timers); + + timer = &dm_timers[0]; + while (timer->base) { + list_add_tail((struct list_head *)timer, &dm_timer_info.unused_timers); + omap_dm_timer_reset(timer); + timer++; + } +} + +static int __init omap_dm_timer_init(void) +{ + if (cpu_is_omap16xx()) + __dm_timer_init(); + return 0; +} + +arch_initcall(omap_dm_timer_init); diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index aa481ea3d702..55059a24ad41 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -3,7 +3,7 @@ * * Support functions for OMAP GPIO * - * Copyright (C) 2003 Nokia Corporation + * Copyright (C) 2003-2005 Nokia Corporation * Written by Juha Yrjölä <juha.yrjola@nokia.com> * * This program is free software; you can redistribute it and/or modify @@ -17,8 +17,11 @@ #include <linux/sched.h> #include <linux/interrupt.h> #include <linux/ptrace.h> +#include <linux/sysdev.h> +#include <linux/err.h> #include <asm/hardware.h> +#include <asm/hardware/clock.h> #include <asm/irq.h> #include <asm/arch/irqs.h> #include <asm/arch/gpio.h> @@ -29,7 +32,7 @@ /* * OMAP1510 GPIO registers */ -#define OMAP1510_GPIO_BASE 0xfffce000 +#define OMAP1510_GPIO_BASE (void __iomem *)0xfffce000 #define OMAP1510_GPIO_DATA_INPUT 0x00 #define OMAP1510_GPIO_DATA_OUTPUT 0x04 #define OMAP1510_GPIO_DIR_CONTROL 0x08 @@ -43,34 +46,37 @@ /* * OMAP1610 specific GPIO registers */ -#define OMAP1610_GPIO1_BASE 0xfffbe400 -#define OMAP1610_GPIO2_BASE 0xfffbec00 -#define OMAP1610_GPIO3_BASE 0xfffbb400 -#define OMAP1610_GPIO4_BASE 0xfffbbc00 +#define OMAP1610_GPIO1_BASE (void __iomem *)0xfffbe400 +#define OMAP1610_GPIO2_BASE (void __iomem *)0xfffbec00 +#define OMAP1610_GPIO3_BASE (void __iomem *)0xfffbb400 +#define OMAP1610_GPIO4_BASE (void __iomem *)0xfffbbc00 #define OMAP1610_GPIO_REVISION 0x0000 #define OMAP1610_GPIO_SYSCONFIG 0x0010 #define OMAP1610_GPIO_SYSSTATUS 0x0014 #define OMAP1610_GPIO_IRQSTATUS1 0x0018 #define OMAP1610_GPIO_IRQENABLE1 0x001c +#define OMAP1610_GPIO_WAKEUPENABLE 0x0028 #define OMAP1610_GPIO_DATAIN 0x002c #define OMAP1610_GPIO_DATAOUT 0x0030 #define OMAP1610_GPIO_DIRECTION 0x0034 #define OMAP1610_GPIO_EDGE_CTRL1 0x0038 #define OMAP1610_GPIO_EDGE_CTRL2 0x003c #define OMAP1610_GPIO_CLEAR_IRQENABLE1 0x009c +#define OMAP1610_GPIO_CLEAR_WAKEUPENA 0x00a8 #define OMAP1610_GPIO_CLEAR_DATAOUT 0x00b0 #define OMAP1610_GPIO_SET_IRQENABLE1 0x00dc +#define OMAP1610_GPIO_SET_WAKEUPENA 0x00e8 #define OMAP1610_GPIO_SET_DATAOUT 0x00f0 /* * OMAP730 specific GPIO registers */ -#define OMAP730_GPIO1_BASE 0xfffbc000 -#define OMAP730_GPIO2_BASE 0xfffbc800 -#define OMAP730_GPIO3_BASE 0xfffbd000 -#define OMAP730_GPIO4_BASE 0xfffbd800 -#define OMAP730_GPIO5_BASE 0xfffbe000 -#define OMAP730_GPIO6_BASE 0xfffbe800 +#define OMAP730_GPIO1_BASE (void __iomem *)0xfffbc000 +#define OMAP730_GPIO2_BASE (void __iomem *)0xfffbc800 +#define OMAP730_GPIO3_BASE (void __iomem *)0xfffbd000 +#define OMAP730_GPIO4_BASE (void __iomem *)0xfffbd800 +#define OMAP730_GPIO5_BASE (void __iomem *)0xfffbe000 +#define OMAP730_GPIO6_BASE (void __iomem *)0xfffbe800 #define OMAP730_GPIO_DATA_INPUT 0x00 #define OMAP730_GPIO_DATA_OUTPUT 0x04 #define OMAP730_GPIO_DIR_CONTROL 0x08 @@ -78,14 +84,43 @@ #define OMAP730_GPIO_INT_MASK 0x10 #define OMAP730_GPIO_INT_STATUS 0x14 +/* + * omap24xx specific GPIO registers + */ +#define OMAP24XX_GPIO1_BASE (void __iomem *)0x48018000 +#define OMAP24XX_GPIO2_BASE (void __iomem *)0x4801a000 +#define OMAP24XX_GPIO3_BASE (void __iomem *)0x4801c000 +#define OMAP24XX_GPIO4_BASE (void __iomem *)0x4801e000 +#define OMAP24XX_GPIO_REVISION 0x0000 +#define OMAP24XX_GPIO_SYSCONFIG 0x0010 +#define OMAP24XX_GPIO_SYSSTATUS 0x0014 +#define OMAP24XX_GPIO_IRQSTATUS1 0x0018 +#define OMAP24XX_GPIO_IRQENABLE1 0x001c +#define OMAP24XX_GPIO_CTRL 0x0030 +#define OMAP24XX_GPIO_OE 0x0034 +#define OMAP24XX_GPIO_DATAIN 0x0038 +#define OMAP24XX_GPIO_DATAOUT 0x003c +#define OMAP24XX_GPIO_LEVELDETECT0 0x0040 +#define OMAP24XX_GPIO_LEVELDETECT1 0x0044 +#define OMAP24XX_GPIO_RISINGDETECT 0x0048 +#define OMAP24XX_GPIO_FALLINGDETECT 0x004c +#define OMAP24XX_GPIO_CLEARIRQENABLE1 0x0060 +#define OMAP24XX_GPIO_SETIRQENABLE1 0x0064 +#define OMAP24XX_GPIO_CLEARWKUENA 0x0080 +#define OMAP24XX_GPIO_SETWKUENA 0x0084 +#define OMAP24XX_GPIO_CLEARDATAOUT 0x0090 +#define OMAP24XX_GPIO_SETDATAOUT 0x0094 + #define OMAP_MPUIO_MASK (~OMAP_MAX_GPIO_LINES & 0xff) struct gpio_bank { - u32 base; + void __iomem *base; u16 irq; u16 virtual_irq_start; - u8 method; + int method; u32 reserved_map; + u32 suspend_wakeup; + u32 saved_wakeup; spinlock_t lock; }; @@ -93,8 +128,9 @@ struct gpio_bank { #define METHOD_GPIO_1510 1 #define METHOD_GPIO_1610 2 #define METHOD_GPIO_730 3 +#define METHOD_GPIO_24XX 4 -#if defined(CONFIG_ARCH_OMAP16XX) +#ifdef CONFIG_ARCH_OMAP16XX static struct gpio_bank gpio_bank_1610[5] = { { OMAP_MPUIO_BASE, INT_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO}, { OMAP1610_GPIO1_BASE, INT_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_1610 }, @@ -123,6 +159,15 @@ static struct gpio_bank gpio_bank_730[7] = { }; #endif +#ifdef CONFIG_ARCH_OMAP24XX +static struct gpio_bank gpio_bank_24xx[4] = { + { OMAP24XX_GPIO1_BASE, INT_24XX_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_24XX }, + { OMAP24XX_GPIO2_BASE, INT_24XX_GPIO_BANK2, IH_GPIO_BASE + 32, METHOD_GPIO_24XX }, + { OMAP24XX_GPIO3_BASE, INT_24XX_GPIO_BANK3, IH_GPIO_BASE + 64, METHOD_GPIO_24XX }, + { OMAP24XX_GPIO4_BASE, INT_24XX_GPIO_BANK4, IH_GPIO_BASE + 96, METHOD_GPIO_24XX }, +}; +#endif + static struct gpio_bank *gpio_bank; static int gpio_bank_count; @@ -149,14 +194,23 @@ static inline struct gpio_bank *get_gpio_bank(int gpio) return &gpio_bank[1 + (gpio >> 5)]; } #endif +#ifdef CONFIG_ARCH_OMAP24XX + if (cpu_is_omap24xx()) + return &gpio_bank[gpio >> 5]; +#endif } static inline int get_gpio_index(int gpio) { +#ifdef CONFIG_ARCH_OMAP730 if (cpu_is_omap730()) return gpio & 0x1f; - else - return gpio & 0x0f; +#endif +#ifdef CONFIG_ARCH_OMAP24XX + if (cpu_is_omap24xx()) + return gpio & 0x1f; +#endif + return gpio & 0x0f; } static inline int gpio_valid(int gpio) @@ -180,6 +234,10 @@ static inline int gpio_valid(int gpio) if (cpu_is_omap730() && gpio < 192) return 0; #endif +#ifdef CONFIG_ARCH_OMAP24XX + if (cpu_is_omap24xx() && gpio < 128) + return 0; +#endif return -1; } @@ -195,7 +253,7 @@ static int check_gpio(int gpio) static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input) { - u32 reg = bank->base; + void __iomem *reg = bank->base; u32 l; switch (bank->method) { @@ -211,6 +269,9 @@ static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input) case METHOD_GPIO_730: reg += OMAP730_GPIO_DIR_CONTROL; break; + case METHOD_GPIO_24XX: + reg += OMAP24XX_GPIO_OE; + break; } l = __raw_readl(reg); if (is_input) @@ -234,7 +295,7 @@ void omap_set_gpio_direction(int gpio, int is_input) static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable) { - u32 reg = bank->base; + void __iomem *reg = bank->base; u32 l = 0; switch (bank->method) { @@ -269,6 +330,13 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable) else l &= ~(1 << gpio); break; + case METHOD_GPIO_24XX: + if (enable) + reg += OMAP24XX_GPIO_SETDATAOUT; + else + reg += OMAP24XX_GPIO_CLEARDATAOUT; + l = 1 << gpio; + break; default: BUG(); return; @@ -291,7 +359,7 @@ void omap_set_gpio_dataout(int gpio, int enable) int omap_get_gpio_datain(int gpio) { struct gpio_bank *bank; - u32 reg; + void __iomem *reg; if (check_gpio(gpio) < 0) return -1; @@ -310,109 +378,132 @@ int omap_get_gpio_datain(int gpio) case METHOD_GPIO_730: reg += OMAP730_GPIO_DATA_INPUT; break; + case METHOD_GPIO_24XX: + reg += OMAP24XX_GPIO_DATAIN; + break; default: BUG(); return -1; } - return (__raw_readl(reg) & (1 << get_gpio_index(gpio))) != 0; + return (__raw_readl(reg) + & (1 << get_gpio_index(gpio))) != 0; } -static void _set_gpio_edge_ctrl(struct gpio_bank *bank, int gpio, int edge) +#define MOD_REG_BIT(reg, bit_mask, set) \ +do { \ + int l = __raw_readl(base + reg); \ + if (set) l |= bit_mask; \ + else l &= ~bit_mask; \ + __raw_writel(l, base + reg); \ +} while(0) + +static inline void set_24xx_gpio_triggering(void __iomem *base, int gpio, int trigger) { - u32 reg = bank->base; - u32 l; + u32 gpio_bit = 1 << gpio; + + MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT0, gpio_bit, + trigger & IRQT_LOW); + MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT1, gpio_bit, + trigger & IRQT_HIGH); + MOD_REG_BIT(OMAP24XX_GPIO_RISINGDETECT, gpio_bit, + trigger & IRQT_RISING); + MOD_REG_BIT(OMAP24XX_GPIO_FALLINGDETECT, gpio_bit, + trigger & IRQT_FALLING); + /* FIXME: Possibly do 'set_irq_handler(j, do_level_IRQ)' if only level + * triggering requested. */ +} + +static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger) +{ + void __iomem *reg = bank->base; + u32 l = 0; switch (bank->method) { case METHOD_MPUIO: reg += OMAP_MPUIO_GPIO_INT_EDGE; l = __raw_readl(reg); - if (edge == OMAP_GPIO_RISING_EDGE) + if (trigger == IRQT_RISING) l |= 1 << gpio; - else + else if (trigger == IRQT_FALLING) l &= ~(1 << gpio); - __raw_writel(l, reg); + else + goto bad; break; case METHOD_GPIO_1510: reg += OMAP1510_GPIO_INT_CONTROL; l = __raw_readl(reg); - if (edge == OMAP_GPIO_RISING_EDGE) + if (trigger == IRQT_RISING) l |= 1 << gpio; - else + else if (trigger == IRQT_FALLING) l &= ~(1 << gpio); - __raw_writel(l, reg); + else + goto bad; break; case METHOD_GPIO_1610: - edge &= 0x03; if (gpio & 0x08) reg += OMAP1610_GPIO_EDGE_CTRL2; else reg += OMAP1610_GPIO_EDGE_CTRL1; gpio &= 0x07; + /* We allow only edge triggering, i.e. two lowest bits */ + if (trigger & ~IRQT_BOTHEDGE) + BUG(); + /* NOTE: knows __IRQT_{FAL,RIS}EDGE match OMAP hardware */ + trigger &= 0x03; l = __raw_readl(reg); l &= ~(3 << (gpio << 1)); - l |= edge << (gpio << 1); - __raw_writel(l, reg); + l |= trigger << (gpio << 1); break; case METHOD_GPIO_730: reg += OMAP730_GPIO_INT_CONTROL; l = __raw_readl(reg); - if (edge == OMAP_GPIO_RISING_EDGE) + if (trigger == IRQT_RISING) l |= 1 << gpio; - else + else if (trigger == IRQT_FALLING) l &= ~(1 << gpio); - __raw_writel(l, reg); + else + goto bad; + break; + case METHOD_GPIO_24XX: + set_24xx_gpio_triggering(reg, gpio, trigger); break; default: BUG(); - return; + goto bad; } + __raw_writel(l, reg); + return 0; +bad: + return -EINVAL; } -void omap_set_gpio_edge_ctrl(int gpio, int edge) +static int gpio_irq_type(unsigned irq, unsigned type) { struct gpio_bank *bank; + unsigned gpio; + int retval; + + if (irq > IH_MPUIO_BASE) + gpio = OMAP_MPUIO(irq - IH_MPUIO_BASE); + else + gpio = irq - IH_GPIO_BASE; if (check_gpio(gpio) < 0) - return; + return -EINVAL; + + if (type & (__IRQT_LOWLVL|__IRQT_HIGHLVL|IRQT_PROBE)) + return -EINVAL; + bank = get_gpio_bank(gpio); spin_lock(&bank->lock); - _set_gpio_edge_ctrl(bank, get_gpio_index(gpio), edge); + retval = _set_gpio_triggering(bank, get_gpio_index(gpio), type); spin_unlock(&bank->lock); -} - - -static int _get_gpio_edge_ctrl(struct gpio_bank *bank, int gpio) -{ - u32 reg = bank->base, l; - - switch (bank->method) { - case METHOD_MPUIO: - l = __raw_readl(reg + OMAP_MPUIO_GPIO_INT_EDGE); - return (l & (1 << gpio)) ? - OMAP_GPIO_RISING_EDGE : OMAP_GPIO_FALLING_EDGE; - case METHOD_GPIO_1510: - l = __raw_readl(reg + OMAP1510_GPIO_INT_CONTROL); - return (l & (1 << gpio)) ? - OMAP_GPIO_RISING_EDGE : OMAP_GPIO_FALLING_EDGE; - case METHOD_GPIO_1610: - if (gpio & 0x08) - reg += OMAP1610_GPIO_EDGE_CTRL2; - else - reg += OMAP1610_GPIO_EDGE_CTRL1; - return (__raw_readl(reg) >> ((gpio & 0x07) << 1)) & 0x03; - case METHOD_GPIO_730: - l = __raw_readl(reg + OMAP730_GPIO_INT_CONTROL); - return (l & (1 << gpio)) ? - OMAP_GPIO_RISING_EDGE : OMAP_GPIO_FALLING_EDGE; - default: - BUG(); - return -1; - } + return retval; } static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask) { - u32 reg = bank->base; + void __iomem *reg = bank->base; switch (bank->method) { case METHOD_MPUIO: @@ -428,6 +519,9 @@ static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask) case METHOD_GPIO_730: reg += OMAP730_GPIO_INT_STATUS; break; + case METHOD_GPIO_24XX: + reg += OMAP24XX_GPIO_IRQSTATUS1; + break; default: BUG(); return; @@ -442,7 +536,7 @@ static inline void _clear_gpio_irqstatus(struct gpio_bank *bank, int gpio) static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enable) { - u32 reg = bank->base; + void __iomem *reg = bank->base; u32 l; switch (bank->method) { @@ -477,6 +571,13 @@ static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enab else l |= gpio_mask; break; + case METHOD_GPIO_24XX: + if (enable) + reg += OMAP24XX_GPIO_SETIRQENABLE1; + else + reg += OMAP24XX_GPIO_CLEARIRQENABLE1; + l = gpio_mask; + break; default: BUG(); return; @@ -489,6 +590,50 @@ static inline void _set_gpio_irqenable(struct gpio_bank *bank, int gpio, int ena _enable_gpio_irqbank(bank, 1 << get_gpio_index(gpio), enable); } +/* + * Note that ENAWAKEUP needs to be enabled in GPIO_SYSCONFIG register. + * 1510 does not seem to have a wake-up register. If JTAG is connected + * to the target, system will wake up always on GPIO events. While + * system is running all registered GPIO interrupts need to have wake-up + * enabled. When system is suspended, only selected GPIO interrupts need + * to have wake-up enabled. + */ +static int _set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable) +{ + switch (bank->method) { + case METHOD_GPIO_1610: + case METHOD_GPIO_24XX: + spin_lock(&bank->lock); + if (enable) + bank->suspend_wakeup |= (1 << gpio); + else + bank->suspend_wakeup &= ~(1 << gpio); + spin_unlock(&bank->lock); + return 0; + default: + printk(KERN_ERR "Can't enable GPIO wakeup for method %i\n", + bank->method); + return -EINVAL; + } +} + +/* Use disable_irq_wake() and enable_irq_wake() functions from drivers */ +static int gpio_wake_enable(unsigned int irq, unsigned int enable) +{ + unsigned int gpio = irq - IH_GPIO_BASE; + struct gpio_bank *bank; + int retval; + + if (check_gpio(gpio) < 0) + return -ENODEV; + bank = get_gpio_bank(gpio); + spin_lock(&bank->lock); + retval = _set_gpio_wakeup(bank, get_gpio_index(gpio), enable); + spin_unlock(&bank->lock); + + return retval; +} + int omap_request_gpio(int gpio) { struct gpio_bank *bank; @@ -505,15 +650,33 @@ int omap_request_gpio(int gpio) return -1; } bank->reserved_map |= (1 << get_gpio_index(gpio)); + + /* Set trigger to none. You need to enable the trigger after request_irq */ + _set_gpio_triggering(bank, get_gpio_index(gpio), IRQT_NOEDGE); + #ifdef CONFIG_ARCH_OMAP1510 if (bank->method == METHOD_GPIO_1510) { - u32 reg; + void __iomem *reg; - /* Claim the pin for the ARM */ + /* Claim the pin for MPU */ reg = bank->base + OMAP1510_GPIO_PIN_CONTROL; __raw_writel(__raw_readl(reg) | (1 << get_gpio_index(gpio)), reg); } #endif +#ifdef CONFIG_ARCH_OMAP16XX + if (bank->method == METHOD_GPIO_1610) { + /* Enable wake-up during idle for dynamic tick */ + void __iomem *reg = bank->base + OMAP1610_GPIO_SET_WAKEUPENA; + __raw_writel(1 << get_gpio_index(gpio), reg); + } +#endif +#ifdef CONFIG_ARCH_OMAP24XX + if (bank->method == METHOD_GPIO_24XX) { + /* Enable wake-up during idle for dynamic tick */ + void __iomem *reg = bank->base + OMAP24XX_GPIO_SETWKUENA; + __raw_writel(1 << get_gpio_index(gpio), reg); + } +#endif spin_unlock(&bank->lock); return 0; @@ -533,6 +696,20 @@ void omap_free_gpio(int gpio) spin_unlock(&bank->lock); return; } +#ifdef CONFIG_ARCH_OMAP16XX + if (bank->method == METHOD_GPIO_1610) { + /* Disable wake-up during idle for dynamic tick */ + void __iomem *reg = bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA; + __raw_writel(1 << get_gpio_index(gpio), reg); + } +#endif +#ifdef CONFIG_ARCH_OMAP24XX + if (bank->method == METHOD_GPIO_24XX) { + /* Disable wake-up during idle for dynamic tick */ + void __iomem *reg = bank->base + OMAP24XX_GPIO_CLEARWKUENA; + __raw_writel(1 << get_gpio_index(gpio), reg); + } +#endif bank->reserved_map &= ~(1 << get_gpio_index(gpio)); _set_gpio_direction(bank, get_gpio_index(gpio), 1); _set_gpio_irqenable(bank, gpio, 0); @@ -552,7 +729,7 @@ void omap_free_gpio(int gpio) static void gpio_irq_handler(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs) { - u32 isr_reg = 0; + void __iomem *isr_reg = NULL; u32 isr; unsigned int gpio_irq; struct gpio_bank *bank; @@ -574,24 +751,30 @@ static void gpio_irq_handler(unsigned int irq, struct irqdesc *desc, if (bank->method == METHOD_GPIO_730) isr_reg = bank->base + OMAP730_GPIO_INT_STATUS; #endif +#ifdef CONFIG_ARCH_OMAP24XX + if (bank->method == METHOD_GPIO_24XX) + isr_reg = bank->base + OMAP24XX_GPIO_IRQSTATUS1; +#endif - isr = __raw_readl(isr_reg); - _enable_gpio_irqbank(bank, isr, 0); - _clear_gpio_irqbank(bank, isr); - _enable_gpio_irqbank(bank, isr, 1); - desc->chip->unmask(irq); - - if (unlikely(!isr)) - return; - - gpio_irq = bank->virtual_irq_start; - for (; isr != 0; isr >>= 1, gpio_irq++) { - struct irqdesc *d; - if (!(isr & 1)) - continue; - d = irq_desc + gpio_irq; - desc_handle_irq(gpio_irq, d, regs); - } + while(1) { + isr = __raw_readl(isr_reg); + _enable_gpio_irqbank(bank, isr, 0); + _clear_gpio_irqbank(bank, isr); + _enable_gpio_irqbank(bank, isr, 1); + desc->chip->unmask(irq); + + if (!isr) + break; + + gpio_irq = bank->virtual_irq_start; + for (; isr != 0; isr >>= 1, gpio_irq++) { + struct irqdesc *d; + if (!(isr & 1)) + continue; + d = irq_desc + gpio_irq; + desc_handle_irq(gpio_irq, d, regs); + } + } } static void gpio_ack_irq(unsigned int irq) @@ -613,14 +796,10 @@ static void gpio_mask_irq(unsigned int irq) static void gpio_unmask_irq(unsigned int irq) { unsigned int gpio = irq - IH_GPIO_BASE; + unsigned int gpio_idx = get_gpio_index(gpio); struct gpio_bank *bank = get_gpio_bank(gpio); - if (_get_gpio_edge_ctrl(bank, get_gpio_index(gpio)) == OMAP_GPIO_NO_EDGE) { - printk(KERN_ERR "OMAP GPIO %d: trying to enable GPIO IRQ while no edge is set\n", - gpio); - _set_gpio_edge_ctrl(bank, get_gpio_index(gpio), OMAP_GPIO_RISING_EDGE); - } - _set_gpio_irqenable(bank, gpio, 1); + _set_gpio_irqenable(bank, gpio_idx, 1); } static void mpuio_ack_irq(unsigned int irq) @@ -645,9 +824,11 @@ static void mpuio_unmask_irq(unsigned int irq) } static struct irqchip gpio_irq_chip = { - .ack = gpio_ack_irq, - .mask = gpio_mask_irq, - .unmask = gpio_unmask_irq, + .ack = gpio_ack_irq, + .mask = gpio_mask_irq, + .unmask = gpio_unmask_irq, + .set_type = gpio_irq_type, + .set_wake = gpio_wake_enable, }; static struct irqchip mpuio_irq_chip = { @@ -657,6 +838,7 @@ static struct irqchip mpuio_irq_chip = { }; static int initialized = 0; +static struct clk * gpio_ck = NULL; static int __init _omap_gpio_init(void) { @@ -665,6 +847,14 @@ static int __init _omap_gpio_init(void) initialized = 1; + if (cpu_is_omap1510()) { + gpio_ck = clk_get(NULL, "arm_gpio_ck"); + if (IS_ERR(gpio_ck)) + printk("Could not get arm_gpio_ck\n"); + else + clk_use(gpio_ck); + } + #ifdef CONFIG_ARCH_OMAP1510 if (cpu_is_omap1510()) { printk(KERN_INFO "OMAP1510 GPIO hardware\n"); @@ -674,7 +864,7 @@ static int __init _omap_gpio_init(void) #endif #if defined(CONFIG_ARCH_OMAP16XX) if (cpu_is_omap16xx()) { - int rev; + u32 rev; gpio_bank_count = 5; gpio_bank = gpio_bank_1610; @@ -690,6 +880,17 @@ static int __init _omap_gpio_init(void) gpio_bank = gpio_bank_730; } #endif +#ifdef CONFIG_ARCH_OMAP24XX + if (cpu_is_omap24xx()) { + int rev; + + gpio_bank_count = 4; + gpio_bank = gpio_bank_24xx; + rev = omap_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION); + printk(KERN_INFO "OMAP24xx GPIO hardware version %d.%d\n", + (rev >> 4) & 0x0f, rev & 0x0f); + } +#endif for (i = 0; i < gpio_bank_count; i++) { int j, gpio_count = 16; @@ -710,6 +911,7 @@ static int __init _omap_gpio_init(void) if (bank->method == METHOD_GPIO_1610) { __raw_writew(0x0000, bank->base + OMAP1610_GPIO_IRQENABLE1); __raw_writew(0xffff, bank->base + OMAP1610_GPIO_IRQSTATUS1); + __raw_writew(0x0014, bank->base + OMAP1610_GPIO_SYSCONFIG); } #endif #ifdef CONFIG_ARCH_OMAP730 @@ -720,6 +922,14 @@ static int __init _omap_gpio_init(void) gpio_count = 32; /* 730 has 32-bit GPIOs */ } #endif +#ifdef CONFIG_ARCH_OMAP24XX + if (bank->method == METHOD_GPIO_24XX) { + __raw_writel(0x00000000, bank->base + OMAP24XX_GPIO_IRQENABLE1); + __raw_writel(0xffffffff, bank->base + OMAP24XX_GPIO_IRQSTATUS1); + + gpio_count = 32; + } +#endif for (j = bank->virtual_irq_start; j < bank->virtual_irq_start + gpio_count; j++) { if (bank->method == METHOD_MPUIO) @@ -735,12 +945,97 @@ static int __init _omap_gpio_init(void) /* Enable system clock for GPIO module. * The CAM_CLK_CTRL *is* really the right place. */ - if (cpu_is_omap1610() || cpu_is_omap1710()) + if (cpu_is_omap16xx()) omap_writel(omap_readl(ULPD_CAM_CLK_CTRL) | 0x04, ULPD_CAM_CLK_CTRL); return 0; } +#if defined (CONFIG_ARCH_OMAP16XX) || defined (CONFIG_ARCH_OMAP24XX) +static int omap_gpio_suspend(struct sys_device *dev, pm_message_t mesg) +{ + int i; + + if (!cpu_is_omap24xx() && !cpu_is_omap16xx()) + return 0; + + for (i = 0; i < gpio_bank_count; i++) { + struct gpio_bank *bank = &gpio_bank[i]; + void __iomem *wake_status; + void __iomem *wake_clear; + void __iomem *wake_set; + + switch (bank->method) { + case METHOD_GPIO_1610: + wake_status = bank->base + OMAP1610_GPIO_WAKEUPENABLE; + wake_clear = bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA; + wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA; + break; + case METHOD_GPIO_24XX: + wake_status = bank->base + OMAP24XX_GPIO_SETWKUENA; + wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA; + wake_set = bank->base + OMAP24XX_GPIO_SETWKUENA; + break; + default: + continue; + } + + spin_lock(&bank->lock); + bank->saved_wakeup = __raw_readl(wake_status); + __raw_writel(0xffffffff, wake_clear); + __raw_writel(bank->suspend_wakeup, wake_set); + spin_unlock(&bank->lock); + } + + return 0; +} + +static int omap_gpio_resume(struct sys_device *dev) +{ + int i; + + if (!cpu_is_omap24xx() && !cpu_is_omap16xx()) + return 0; + + for (i = 0; i < gpio_bank_count; i++) { + struct gpio_bank *bank = &gpio_bank[i]; + void __iomem *wake_clear; + void __iomem *wake_set; + + switch (bank->method) { + case METHOD_GPIO_1610: + wake_clear = bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA; + wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA; + break; + case METHOD_GPIO_24XX: + wake_clear = bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA; + wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA; + break; + default: + continue; + } + + spin_lock(&bank->lock); + __raw_writel(0xffffffff, wake_clear); + __raw_writel(bank->saved_wakeup, wake_set); + spin_unlock(&bank->lock); + } + + return 0; +} + +static struct sysdev_class omap_gpio_sysclass = { + set_kset_name("gpio"), + .suspend = omap_gpio_suspend, + .resume = omap_gpio_resume, +}; + +static struct sys_device omap_gpio_device = { + .id = 0, + .cls = &omap_gpio_sysclass, +}; +#endif + /* * This may get called early from board specific init */ @@ -752,11 +1047,30 @@ int omap_gpio_init(void) return 0; } +static int __init omap_gpio_sysinit(void) +{ + int ret = 0; + + if (!initialized) + ret = _omap_gpio_init(); + +#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) + if (cpu_is_omap16xx() || cpu_is_omap24xx()) { + if (ret == 0) { + ret = sysdev_class_register(&omap_gpio_sysclass); + if (ret == 0) + ret = sysdev_register(&omap_gpio_device); + } + } +#endif + + return ret; +} + EXPORT_SYMBOL(omap_request_gpio); EXPORT_SYMBOL(omap_free_gpio); EXPORT_SYMBOL(omap_set_gpio_direction); EXPORT_SYMBOL(omap_set_gpio_dataout); EXPORT_SYMBOL(omap_get_gpio_datain); -EXPORT_SYMBOL(omap_set_gpio_edge_ctrl); -arch_initcall(omap_gpio_init); +arch_initcall(omap_gpio_sysinit); diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c index 43567d5edddb..9c9b7df3faf6 100644 --- a/arch/arm/plat-omap/mcbsp.c +++ b/arch/arm/plat-omap/mcbsp.c @@ -27,6 +27,7 @@ #include <asm/arch/dma.h> #include <asm/arch/mux.h> #include <asm/arch/irqs.h> +#include <asm/arch/dsp_common.h> #include <asm/arch/mcbsp.h> #include <asm/hardware/clock.h> @@ -187,9 +188,6 @@ static int omap_mcbsp_check(unsigned int id) return -1; } -#define EN_XORPCK 1 -#define DSP_RSTCT2 0xe1008014 - static void omap_mcbsp_dsp_request(void) { if (cpu_is_omap1510() || cpu_is_omap16xx()) { @@ -198,6 +196,11 @@ static void omap_mcbsp_dsp_request(void) /* enable 12MHz clock to mcbsp 1 & 3 */ clk_use(mcbsp_dspxor_ck); + + /* + * DSP external peripheral reset + * FIXME: This should be moved to dsp code + */ __raw_writew(__raw_readw(DSP_RSTCT2) | 1 | 1 << 1, DSP_RSTCT2); } diff --git a/arch/arm/plat-omap/mux.c b/arch/arm/plat-omap/mux.c index ea7b955b9c81..64482040f89e 100644 --- a/arch/arm/plat-omap/mux.c +++ b/arch/arm/plat-omap/mux.c @@ -48,6 +48,9 @@ omap_cfg_reg(const reg_cfg_t reg_cfg) pull_orig = 0, pull = 0; unsigned int mask, warn = 0; + if (cpu_is_omap7xx()) + return 0; + if (reg_cfg > ARRAY_SIZE(reg_cfg_table)) { printk(KERN_ERR "MUX: reg_cfg %d\n", reg_cfg); return -EINVAL; diff --git a/arch/arm/plat-omap/ocpi.c b/arch/arm/plat-omap/ocpi.c index 2ede2ee8cae4..1fb16f9edfd5 100644 --- a/arch/arm/plat-omap/ocpi.c +++ b/arch/arm/plat-omap/ocpi.c @@ -25,6 +25,7 @@ #include <linux/config.h> #include <linux/module.h> +#include <linux/version.h> #include <linux/types.h> #include <linux/errno.h> #include <linux/kernel.h> diff --git a/arch/arm/plat-omap/pm.c b/arch/arm/plat-omap/pm.c index e6536b16c385..e15c6c1ddec9 100644 --- a/arch/arm/plat-omap/pm.c +++ b/arch/arm/plat-omap/pm.c @@ -39,24 +39,32 @@ #include <linux/sched.h> #include <linux/proc_fs.h> #include <linux/pm.h> +#include <linux/interrupt.h> #include <asm/io.h> +#include <asm/irq.h> #include <asm/mach/time.h> -#include <asm/mach-types.h> +#include <asm/mach/irq.h> -#include <asm/arch/omap16xx.h> +#include <asm/mach-types.h> +#include <asm/arch/irqs.h> +#include <asm/arch/tc.h> #include <asm/arch/pm.h> #include <asm/arch/mux.h> -#include <asm/arch/tc.h> #include <asm/arch/tps65010.h> +#include <asm/arch/dsp_common.h> #include "clock.h" +#include "sram.h" static unsigned int arm_sleep_save[ARM_SLEEP_SAVE_SIZE]; static unsigned short ulpd_sleep_save[ULPD_SLEEP_SAVE_SIZE]; static unsigned int mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_SIZE]; static unsigned int mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_SIZE]; +static void (*omap_sram_idle)(void) = NULL; +static void (*omap_sram_suspend)(unsigned long r0, unsigned long r1) = NULL; + /* * Let's power down on idle, but only if we are really * idle, because once we start down the path of @@ -65,7 +73,6 @@ static unsigned int mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_SIZE]; */ void omap_pm_idle(void) { - int (*func_ptr)(void) = 0; unsigned int mask32 = 0; /* @@ -84,6 +91,13 @@ void omap_pm_idle(void) mask32 = omap_readl(ARM_SYSST); /* + * Prevent the ULPD from entering low power state by setting + * POWER_CTRL_REG:4 = 0 + */ + omap_writew(omap_readw(ULPD_POWER_CTRL) & + ~ULPD_DEEP_SLEEP_TRANSITION_EN, ULPD_POWER_CTRL); + + /* * Since an interrupt may set up a timer, we don't want to * reprogram the hardware timer with interrupts enabled. * Re-enable interrupts only after returning from idle. @@ -92,18 +106,9 @@ void omap_pm_idle(void) if ((mask32 & DSP_IDLE) == 0) { __asm__ volatile ("mcr p15, 0, r0, c7, c0, 4"); - } else { - - if (cpu_is_omap1510()) { - func_ptr = (void *)(OMAP1510_SRAM_IDLE_SUSPEND); - } else if (cpu_is_omap1610() || cpu_is_omap1710()) { - func_ptr = (void *)(OMAP1610_SRAM_IDLE_SUSPEND); - } else if (cpu_is_omap5912()) { - func_ptr = (void *)(OMAP5912_SRAM_IDLE_SUSPEND); - } + } else + omap_sram_idle(); - func_ptr(); - } local_fiq_enable(); local_irq_enable(); } @@ -115,58 +120,55 @@ void omap_pm_idle(void) */ static void omap_pm_wakeup_setup(void) { - /* - * Enable ARM XOR clock and release peripheral from reset by - * writing 1 to PER_EN bit in ARM_RSTCT2, this is required - * for UART configuration to use UART2 to wake up. - */ - - omap_writel(omap_readl(ARM_IDLECT2) | ENABLE_XORCLK, ARM_IDLECT2); - omap_writel(omap_readl(ARM_RSTCT2) | PER_EN, ARM_RSTCT2); - omap_writew(MODEM_32K_EN, ULPD_CLOCK_CTRL); + u32 level1_wake = OMAP_IRQ_BIT(INT_IH2_IRQ); + u32 level2_wake = OMAP_IRQ_BIT(INT_UART2) | OMAP_IRQ_BIT(INT_KEYBOARD); /* - * Turn off all interrupts except L1-2nd level cascade, - * and the L2 wakeup interrupts: keypad and UART2. + * Turn off all interrupts except GPIO bank 1, L1-2nd level cascade, + * and the L2 wakeup interrupts: keypad and UART2. Note that the + * drivers must still separately call omap_set_gpio_wakeup() to + * wake up to a GPIO interrupt. */ + if (cpu_is_omap1510() || cpu_is_omap16xx()) + level1_wake |= OMAP_IRQ_BIT(INT_GPIO_BANK1); + else if (cpu_is_omap730()) + level1_wake |= OMAP_IRQ_BIT(INT_730_GPIO_BANK1); - omap_writel(~IRQ_LEVEL2, OMAP_IH1_MIR); + omap_writel(~level1_wake, OMAP_IH1_MIR); - if (cpu_is_omap1510()) { - omap_writel(~(IRQ_UART2 | IRQ_KEYBOARD), OMAP_IH2_MIR); - } + if (cpu_is_omap1510()) + omap_writel(~level2_wake, OMAP_IH2_MIR); + /* INT_1610_WAKE_UP_REQ is needed for GPIO wakeup... */ if (cpu_is_omap16xx()) { - omap_writel(~(IRQ_UART2 | IRQ_KEYBOARD), OMAP_IH2_0_MIR); - - omap_writel(~0x0, OMAP_IH2_1_MIR); + omap_writel(~level2_wake, OMAP_IH2_0_MIR); + omap_writel(~OMAP_IRQ_BIT(INT_1610_WAKE_UP_REQ), OMAP_IH2_1_MIR); omap_writel(~0x0, OMAP_IH2_2_MIR); omap_writel(~0x0, OMAP_IH2_3_MIR); } - /* New IRQ agreement */ + /* New IRQ agreement, recalculate in cascade order */ + omap_writel(1, OMAP_IH2_CONTROL); omap_writel(1, OMAP_IH1_CONTROL); - - /* external PULL to down, bit 22 = 0 */ - omap_writel(omap_readl(PULL_DWN_CTRL_2) & ~(1<<22), PULL_DWN_CTRL_2); } void omap_pm_suspend(void) { - unsigned int mask32 = 0; unsigned long arg0 = 0, arg1 = 0; - int (*func_ptr)(unsigned short, unsigned short) = 0; - unsigned short save_dsp_idlect2; - printk("PM: OMAP%x is entering deep sleep now ...\n", system_rev); + printk("PM: OMAP%x is trying to enter deep sleep...\n", system_rev); + + omap_serial_wake_trigger(1); if (machine_is_omap_osk()) { /* Stop LED1 (D9) blink */ tps65010_set_led(LED1, OFF); } + omap_writew(0xffff, ULPD_SOFT_DISABLE_REQ_REG); + /* - * Step 1: turn off interrupts + * Step 1: turn off interrupts (FIXME: NOTE: already disabled) */ local_irq_disable(); @@ -207,6 +209,8 @@ void omap_pm_suspend(void) ARM_SAVE(ARM_CKCTL); ARM_SAVE(ARM_IDLECT1); ARM_SAVE(ARM_IDLECT2); + if (!(cpu_is_omap1510())) + ARM_SAVE(ARM_IDLECT3); ARM_SAVE(ARM_EWUPCT); ARM_SAVE(ARM_RSTCT1); ARM_SAVE(ARM_RSTCT2); @@ -214,42 +218,12 @@ void omap_pm_suspend(void) ULPD_SAVE(ULPD_CLOCK_CTRL); ULPD_SAVE(ULPD_STATUS_REQ); - /* - * Step 3: LOW_PWR signal enabling - * - * Allow the LOW_PWR signal to be visible on MPUIO5 ball. - */ - if (cpu_is_omap1510()) { - /* POWER_CTRL_REG = 0x1 (LOW_POWER is available) */ - omap_writew(omap_readw(ULPD_POWER_CTRL) | - OMAP1510_ULPD_LOW_POWER_REQ, ULPD_POWER_CTRL); - } else if (cpu_is_omap16xx()) { - /* POWER_CTRL_REG = 0x1 (LOW_POWER is available) */ - omap_writew(omap_readw(ULPD_POWER_CTRL) | - OMAP1610_ULPD_LOW_POWER_REQ, ULPD_POWER_CTRL); - } - - /* configure LOW_PWR pin */ - omap_cfg_reg(T20_1610_LOW_PWR); + /* (Step 3 removed - we now allow deep sleep by default) */ /* * Step 4: OMAP DSP Shutdown */ - /* Set DSP_RST = 1 and DSP_EN = 0, put DSP block into reset */ - omap_writel((omap_readl(ARM_RSTCT1) | DSP_RST) & ~DSP_ENABLE, - ARM_RSTCT1); - - /* Set DSP boot mode to DSP-IDLE, DSP_BOOT_MODE = 0x2 */ - omap_writel(DSP_IDLE_MODE, MPUI_DSP_BOOT_CONFIG); - - /* Set EN_DSPCK = 0, stop DSP block clock */ - omap_writel(omap_readl(ARM_CKCTL) & ~DSP_CLOCK_ENABLE, ARM_CKCTL); - - /* Stop any DSP domain clocks */ - omap_writel(omap_readl(ARM_IDLECT2) | (1<<EN_APICK), ARM_IDLECT2); - save_dsp_idlect2 = __raw_readw(DSP_IDLECT2); - __raw_writew(0, DSP_IDLECT2); /* * Step 5: Wakeup Event Setup @@ -258,24 +232,9 @@ void omap_pm_suspend(void) omap_pm_wakeup_setup(); /* - * Step 6a: ARM and Traffic controller shutdown - * - * Step 6 starts here with clock and watchdog disable + * Step 6: ARM and Traffic controller shutdown */ - /* stop clocks */ - mask32 = omap_readl(ARM_IDLECT2); - mask32 &= ~(1<<EN_WDTCK); /* bit 0 -> 0 (WDT clock) */ - mask32 |= (1<<EN_XORPCK); /* bit 1 -> 1 (XORPCK clock) */ - mask32 &= ~(1<<EN_PERCK); /* bit 2 -> 0 (MPUPER_CK clock) */ - mask32 &= ~(1<<EN_LCDCK); /* bit 3 -> 0 (LCDC clock) */ - mask32 &= ~(1<<EN_LBCK); /* bit 4 -> 0 (local bus clock) */ - mask32 |= (1<<EN_APICK); /* bit 6 -> 1 (MPUI clock) */ - mask32 &= ~(1<<EN_TIMCK); /* bit 7 -> 0 (MPU timer clock) */ - mask32 &= ~(1<<DMACK_REQ); /* bit 8 -> 0 (DMAC clock) */ - mask32 &= ~(1<<EN_GPIOCK); /* bit 9 -> 0 (GPIO clock) */ - omap_writel(mask32, ARM_IDLECT2); - /* disable ARM watchdog */ omap_writel(0x00F5, OMAP_WDT_TIMER_MODE); omap_writel(0x00A0, OMAP_WDT_TIMER_MODE); @@ -295,47 +254,24 @@ void omap_pm_suspend(void) arg0 = arm_sleep_save[ARM_SLEEP_SAVE_ARM_IDLECT1]; arg1 = arm_sleep_save[ARM_SLEEP_SAVE_ARM_IDLECT2]; - if (cpu_is_omap1510()) { - func_ptr = (void *)(OMAP1510_SRAM_API_SUSPEND); - } else if (cpu_is_omap1610() || cpu_is_omap1710()) { - func_ptr = (void *)(OMAP1610_SRAM_API_SUSPEND); - } else if (cpu_is_omap5912()) { - func_ptr = (void *)(OMAP5912_SRAM_API_SUSPEND); - } - /* * Step 6c: ARM and Traffic controller shutdown * * Jump to assembly code. The processor will stay there * until wake up. */ - - func_ptr(arg0, arg1); + omap_sram_suspend(arg0, arg1); /* * If we are here, processor is woken up! */ - if (cpu_is_omap1510()) { - /* POWER_CTRL_REG = 0x0 (LOW_POWER is disabled) */ - omap_writew(omap_readw(ULPD_POWER_CTRL) & - ~OMAP1510_ULPD_LOW_POWER_REQ, ULPD_POWER_CTRL); - } else if (cpu_is_omap16xx()) { - /* POWER_CTRL_REG = 0x0 (LOW_POWER is disabled) */ - omap_writew(omap_readw(ULPD_POWER_CTRL) & - ~OMAP1610_ULPD_LOW_POWER_REQ, ULPD_POWER_CTRL); - } - - - /* Restore DSP clocks */ - omap_writel(omap_readl(ARM_IDLECT2) | (1<<EN_APICK), ARM_IDLECT2); - __raw_writew(save_dsp_idlect2, DSP_IDLECT2); - ARM_RESTORE(ARM_IDLECT2); - /* * Restore ARM state, except ARM_IDLECT1/2 which omap_cpu_suspend did */ + if (!(cpu_is_omap1510())) + ARM_RESTORE(ARM_IDLECT3); ARM_RESTORE(ARM_CKCTL); ARM_RESTORE(ARM_EWUPCT); ARM_RESTORE(ARM_RSTCT1); @@ -366,6 +302,8 @@ void omap_pm_suspend(void) MPUI1610_RESTORE(OMAP_IH2_3_MIR); } + omap_writew(0, ULPD_SOFT_DISABLE_REQ_REG); + /* * Reenable interrupts */ @@ -373,6 +311,8 @@ void omap_pm_suspend(void) local_irq_enable(); local_fiq_enable(); + omap_serial_wake_trigger(0); + printk("PM: OMAP%x is re-starting from deep sleep...\n", system_rev); if (machine_is_omap_osk()) { @@ -401,6 +341,8 @@ static int omap_pm_read_proc( ARM_SAVE(ARM_CKCTL); ARM_SAVE(ARM_IDLECT1); ARM_SAVE(ARM_IDLECT2); + if (!(cpu_is_omap1510())) + ARM_SAVE(ARM_IDLECT3); ARM_SAVE(ARM_EWUPCT); ARM_SAVE(ARM_RSTCT1); ARM_SAVE(ARM_RSTCT2); @@ -436,6 +378,7 @@ static int omap_pm_read_proc( "ARM_CKCTL_REG: 0x%-8x \n" "ARM_IDLECT1_REG: 0x%-8x \n" "ARM_IDLECT2_REG: 0x%-8x \n" + "ARM_IDLECT3_REG: 0x%-8x \n" "ARM_EWUPCT_REG: 0x%-8x \n" "ARM_RSTCT1_REG: 0x%-8x \n" "ARM_RSTCT2_REG: 0x%-8x \n" @@ -449,6 +392,7 @@ static int omap_pm_read_proc( ARM_SHOW(ARM_CKCTL), ARM_SHOW(ARM_IDLECT1), ARM_SHOW(ARM_IDLECT2), + ARM_SHOW(ARM_IDLECT3), ARM_SHOW(ARM_EWUPCT), ARM_SHOW(ARM_RSTCT1), ARM_SHOW(ARM_RSTCT2), @@ -507,7 +451,7 @@ static void omap_pm_init_proc(void) entry = create_proc_read_entry("driver/omap_pm", S_IWUSR | S_IRUGO, NULL, - omap_pm_read_proc, 0); + omap_pm_read_proc, NULL); } #endif /* DEBUG && CONFIG_PROC_FS */ @@ -580,7 +524,21 @@ static int omap_pm_finish(suspend_state_t state) } -struct pm_ops omap_pm_ops ={ +static irqreturn_t omap_wakeup_interrupt(int irq, void * dev, + struct pt_regs * regs) +{ + return IRQ_HANDLED; +} + +static struct irqaction omap_wakeup_irq = { + .name = "peripheral wakeup", + .flags = SA_INTERRUPT, + .handler = omap_wakeup_interrupt +}; + + + +static struct pm_ops omap_pm_ops ={ .pm_disk_mode = 0, .prepare = omap_pm_prepare, .enter = omap_pm_enter, @@ -590,42 +548,61 @@ struct pm_ops omap_pm_ops ={ static int __init omap_pm_init(void) { printk("Power Management for TI OMAP.\n"); - pm_idle = omap_pm_idle; /* * We copy the assembler sleep/wakeup routines to SRAM. * These routines need to be in SRAM as that's the only * memory the MPU can see when it wakes up. */ - -#ifdef CONFIG_ARCH_OMAP1510 if (cpu_is_omap1510()) { - memcpy((void *)OMAP1510_SRAM_IDLE_SUSPEND, - omap1510_idle_loop_suspend, - omap1510_idle_loop_suspend_sz); - memcpy((void *)OMAP1510_SRAM_API_SUSPEND, omap1510_cpu_suspend, - omap1510_cpu_suspend_sz); - } else -#endif - if (cpu_is_omap1610() || cpu_is_omap1710()) { - memcpy((void *)OMAP1610_SRAM_IDLE_SUSPEND, - omap1610_idle_loop_suspend, - omap1610_idle_loop_suspend_sz); - memcpy((void *)OMAP1610_SRAM_API_SUSPEND, omap1610_cpu_suspend, - omap1610_cpu_suspend_sz); - } else if (cpu_is_omap5912()) { - memcpy((void *)OMAP5912_SRAM_IDLE_SUSPEND, - omap1610_idle_loop_suspend, - omap1610_idle_loop_suspend_sz); - memcpy((void *)OMAP5912_SRAM_API_SUSPEND, omap1610_cpu_suspend, - omap1610_cpu_suspend_sz); + omap_sram_idle = omap_sram_push(omap1510_idle_loop_suspend, + omap1510_idle_loop_suspend_sz); + omap_sram_suspend = omap_sram_push(omap1510_cpu_suspend, + omap1510_cpu_suspend_sz); + } else if (cpu_is_omap16xx()) { + omap_sram_idle = omap_sram_push(omap1610_idle_loop_suspend, + omap1610_idle_loop_suspend_sz); + omap_sram_suspend = omap_sram_push(omap1610_cpu_suspend, + omap1610_cpu_suspend_sz); } + if (omap_sram_idle == NULL || omap_sram_suspend == NULL) { + printk(KERN_ERR "PM not initialized: Missing SRAM support\n"); + return -ENODEV; + } + + pm_idle = omap_pm_idle; + + setup_irq(INT_1610_WAKE_UP_REQ, &omap_wakeup_irq); +#if 0 + /* --- BEGIN BOARD-DEPENDENT CODE --- */ + /* Sleepx mask direction */ + omap_writew((omap_readw(0xfffb5008) & ~2), 0xfffb5008); + /* Unmask sleepx signal */ + omap_writew((omap_readw(0xfffb5004) & ~2), 0xfffb5004); + /* --- END BOARD-DEPENDENT CODE --- */ +#endif + + /* Program new power ramp-up time + * (0 for most boards since we don't lower voltage when in deep sleep) + */ + omap_writew(ULPD_SETUP_ANALOG_CELL_3_VAL, ULPD_SETUP_ANALOG_CELL_3); + + /* Setup ULPD POWER_CTRL_REG - enter deep sleep whenever possible */ + omap_writew(ULPD_POWER_CTRL_REG_VAL, ULPD_POWER_CTRL); + + /* Configure IDLECT3 */ + if (cpu_is_omap16xx()) + omap_writel(OMAP1610_IDLECT3_VAL, OMAP1610_IDLECT3); + pm_set_ops(&omap_pm_ops); #if defined(DEBUG) && defined(CONFIG_PROC_FS) omap_pm_init_proc(); #endif + /* configure LOW_PWR pin */ + omap_cfg_reg(T20_1610_LOW_PWR); + return 0; } __initcall(omap_pm_init); diff --git a/arch/arm/plat-omap/sleep.S b/arch/arm/plat-omap/sleep.S index 279490ce772b..9f745836f6aa 100644 --- a/arch/arm/plat-omap/sleep.S +++ b/arch/arm/plat-omap/sleep.S @@ -66,7 +66,7 @@ ENTRY(omap1510_idle_loop_suspend) @ get ARM_IDLECT2 into r2 ldrh r2, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff] mov r5, #OMAP1510_IDLE_CLOCK_DOMAINS & 0xff - orr r5,r5, #OMAP1510_IDLE_CLOCK_DOMAINS & 0xff00 + orr r5, r5, #OMAP1510_IDLE_CLOCK_DOMAINS & 0xff00 strh r5, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff] @ request ARM idle @@ -76,7 +76,7 @@ ENTRY(omap1510_idle_loop_suspend) strh r3, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff] mov r5, #IDLE_WAIT_CYCLES & 0xff - orr r5, r5, #IDLE_WAIT_CYCLES & 0xff00 + orr r5, r5, #IDLE_WAIT_CYCLES & 0xff00 l_1510: subs r5, r5, #1 bne l_1510 /* @@ -96,7 +96,7 @@ l_1510: subs r5, r5, #1 strh r2, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff] strh r1, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff] - ldmfd sp!, {r0 - r12, pc} @ restore regs and return + ldmfd sp!, {r0 - r12, pc} @ restore regs and return ENTRY(omap1510_idle_loop_suspend_sz) .word . - omap1510_idle_loop_suspend @@ -115,8 +115,8 @@ ENTRY(omap1610_idle_loop_suspend) @ turn off clock domains @ get ARM_IDLECT2 into r2 ldrh r2, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff] - mov r5, #OMAP1610_IDLE_CLOCK_DOMAINS & 0xff - orr r5,r5, #OMAP1610_IDLE_CLOCK_DOMAINS & 0xff00 + mov r5, #OMAP1610_IDLECT2_SLEEP_VAL & 0xff + orr r5, r5, #OMAP1610_IDLECT2_SLEEP_VAL & 0xff00 strh r5, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff] @ request ARM idle @@ -126,7 +126,7 @@ ENTRY(omap1610_idle_loop_suspend) strh r3, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff] mov r5, #IDLE_WAIT_CYCLES & 0xff - orr r5, r5, #IDLE_WAIT_CYCLES & 0xff00 + orr r5, r5, #IDLE_WAIT_CYCLES & 0xff00 l_1610: subs r5, r5, #1 bne l_1610 /* @@ -146,7 +146,7 @@ l_1610: subs r5, r5, #1 strh r2, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff] strh r1, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff] - ldmfd sp!, {r0 - r12, pc} @ restore regs and return + ldmfd sp!, {r0 - r12, pc} @ restore regs and return ENTRY(omap1610_idle_loop_suspend_sz) .word . - omap1610_idle_loop_suspend @@ -208,7 +208,7 @@ ENTRY(omap1510_cpu_suspend) @ turn off clock domains mov r5, #OMAP1510_IDLE_CLOCK_DOMAINS & 0xff - orr r5,r5, #OMAP1510_IDLE_CLOCK_DOMAINS & 0xff00 + orr r5, r5, #OMAP1510_IDLE_CLOCK_DOMAINS & 0xff00 strh r5, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff] @ request ARM idle @@ -217,7 +217,7 @@ ENTRY(omap1510_cpu_suspend) strh r3, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff] mov r5, #IDLE_WAIT_CYCLES & 0xff - orr r5, r5, #IDLE_WAIT_CYCLES & 0xff00 + orr r5, r5, #IDLE_WAIT_CYCLES & 0xff00 l_1510_2: subs r5, r5, #1 bne l_1510_2 @@ -237,7 +237,7 @@ l_1510_2: strh r0, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff] @ restore regs and return - ldmfd sp!, {r0 - r12, pc} + ldmfd sp!, {r0 - r12, pc} ENTRY(omap1510_cpu_suspend_sz) .word . - omap1510_cpu_suspend @@ -249,21 +249,26 @@ ENTRY(omap1610_cpu_suspend) @ save registers on stack stmfd sp!, {r0 - r12, lr} + @ Drain write cache + mov r4, #0 + mcr p15, 0, r0, c7, c10, 4 + nop + @ load base address of Traffic Controller - mov r4, #TCMIF_ASM_BASE & 0xff000000 - orr r4, r4, #TCMIF_ASM_BASE & 0x00ff0000 - orr r4, r4, #TCMIF_ASM_BASE & 0x0000ff00 + mov r6, #TCMIF_ASM_BASE & 0xff000000 + orr r6, r6, #TCMIF_ASM_BASE & 0x00ff0000 + orr r6, r6, #TCMIF_ASM_BASE & 0x0000ff00 @ prepare to put SDRAM into self-refresh manually - ldr r5, [r4, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff] - orr r5, r5, #SELF_REFRESH_MODE & 0xff000000 - orr r5, r5, #SELF_REFRESH_MODE & 0x000000ff - str r5, [r4, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff] + ldr r7, [r6, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff] + orr r9, r7, #SELF_REFRESH_MODE & 0xff000000 + orr r9, r9, #SELF_REFRESH_MODE & 0x000000ff + str r9, [r6, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff] @ prepare to put EMIFS to Sleep - ldr r5, [r4, #EMIFS_CONFIG_ASM_OFFSET & 0xff] - orr r5, r5, #IDLE_EMIFS_REQUEST & 0xff - str r5, [r4, #EMIFS_CONFIG_ASM_OFFSET & 0xff] + ldr r8, [r6, #EMIFS_CONFIG_ASM_OFFSET & 0xff] + orr r9, r8, #IDLE_EMIFS_REQUEST & 0xff + str r9, [r6, #EMIFS_CONFIG_ASM_OFFSET & 0xff] @ load base address of ARM_IDLECT1 and ARM_IDLECT2 mov r4, #CLKGEN_REG_ASM_BASE & 0xff000000 @@ -271,26 +276,22 @@ ENTRY(omap1610_cpu_suspend) orr r4, r4, #CLKGEN_REG_ASM_BASE & 0x0000ff00 @ turn off clock domains - mov r5, #OMAP1610_IDLE_CLOCK_DOMAINS & 0xff - orr r5,r5, #OMAP1610_IDLE_CLOCK_DOMAINS & 0xff00 - strh r5, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff] - - @ work around errata of OMAP1610/5912. Enable (!) peripheral - @ clock to let the chip go into deep sleep - ldrh r5, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff] - orr r5,r5, #EN_PERCK_BIT & 0xff + @ do not disable PERCK (0x04) + mov r5, #OMAP1610_IDLECT2_SLEEP_VAL & 0xff + orr r5, r5, #OMAP1610_IDLECT2_SLEEP_VAL & 0xff00 strh r5, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff] @ request ARM idle - mov r3, #OMAP1610_DEEP_SLEEP_REQUEST & 0xff - orr r3, r3, #OMAP1610_DEEP_SLEEP_REQUEST & 0xff00 + mov r3, #OMAP1610_IDLECT1_SLEEP_VAL & 0xff + orr r3, r3, #OMAP1610_IDLECT1_SLEEP_VAL & 0xff00 strh r3, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff] - mov r5, #IDLE_WAIT_CYCLES & 0xff - orr r5, r5, #IDLE_WAIT_CYCLES & 0xff00 -l_1610_2: - subs r5, r5, #1 - bne l_1610_2 + @ disable instruction cache + mrc p15, 0, r9, c1, c0, 0 + bic r2, r9, #0x1000 + mcr p15, 0, r2, c1, c0, 0 + nop + /* * Let's wait for the next wake up event to wake us up. r0 can't be * used here because r0 holds ARM_IDLECT1 @@ -301,13 +302,21 @@ l_1610_2: * omap1610_cpu_suspend()'s resume point. * * It will just start executing here, so we'll restore stuff from the - * stack, reset the ARM_IDLECT1 and ARM_IDLECT2. + * stack. */ + @ re-enable Icache + mcr p15, 0, r9, c1, c0, 0 + + @ reset the ARM_IDLECT1 and ARM_IDLECT2. strh r1, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff] strh r0, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff] + @ Restore EMIFF controls + str r7, [r6, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff] + str r8, [r6, #EMIFS_CONFIG_ASM_OFFSET & 0xff] + @ restore regs and return - ldmfd sp!, {r0 - r12, pc} + ldmfd sp!, {r0 - r12, pc} ENTRY(omap1610_cpu_suspend_sz) .word . - omap1610_cpu_suspend diff --git a/arch/arm/plat-omap/sram-fn.S b/arch/arm/plat-omap/sram-fn.S new file mode 100644 index 000000000000..4bea36964a00 --- /dev/null +++ b/arch/arm/plat-omap/sram-fn.S @@ -0,0 +1,58 @@ +/* + * linux/arch/arm/plat-omap/sram.S + * + * Functions that need to be run in internal SRAM + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/config.h> +#include <linux/linkage.h> +#include <asm/assembler.h> +#include <asm/arch/io.h> +#include <asm/arch/hardware.h> + + .text + +/* + * Reprograms ULPD and CKCTL. + */ +ENTRY(sram_reprogram_clock) + stmfd sp!, {r0 - r12, lr} @ save registers on stack + + mov r2, #IO_ADDRESS(DPLL_CTL) & 0xff000000 + orr r2, r2, #IO_ADDRESS(DPLL_CTL) & 0x00ff0000 + orr r2, r2, #IO_ADDRESS(DPLL_CTL) & 0x0000ff00 + + mov r3, #IO_ADDRESS(ARM_CKCTL) & 0xff000000 + orr r3, r3, #IO_ADDRESS(ARM_CKCTL) & 0x00ff0000 + orr r3, r3, #IO_ADDRESS(ARM_CKCTL) & 0x0000ff00 + + tst r0, #1 << 4 @ want lock mode? + beq newck @ nope + bic r0, r0, #1 << 4 @ else clear lock bit + strh r0, [r2] @ set dpll into bypass mode + orr r0, r0, #1 << 4 @ set lock bit again + +newck: + strh r1, [r3] @ write new ckctl value + strh r0, [r2] @ write new dpll value + + mov r4, #0x0700 @ let the clocks settle + orr r4, r4, #0x00ff +delay: sub r4, r4, #1 + cmp r4, #0 + bne delay + +lock: ldrh r4, [r2], #0 @ read back dpll value + tst r0, #1 << 4 @ want lock mode? + beq out @ nope + tst r4, #1 << 0 @ dpll rate locked? + beq lock @ try again + +out: + ldmfd sp!, {r0 - r12, pc} @ restore regs and return +ENTRY(sram_reprogram_clock_sz) + .word . - sram_reprogram_clock diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c new file mode 100644 index 000000000000..7719a4062e3a --- /dev/null +++ b/arch/arm/plat-omap/sram.c @@ -0,0 +1,116 @@ +/* + * linux/arch/arm/plat-omap/sram.c + * + * OMAP SRAM detection and management + * + * Copyright (C) 2005 Nokia Corporation + * Written by Tony Lindgren <tony@atomide.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> + +#include <asm/mach/map.h> +#include <asm/io.h> +#include <asm/cacheflush.h> + +#include "sram.h" + +#define OMAP1_SRAM_BASE 0xd0000000 +#define OMAP1_SRAM_START 0x20000000 +#define SRAM_BOOTLOADER_SZ 0x80 + +static unsigned long omap_sram_base; +static unsigned long omap_sram_size; +static unsigned long omap_sram_ceil; + +/* + * The amount of SRAM depends on the core type: + * 730 = 200K, 1510 = 512K, 5912 = 256K, 1610 = 16K, 1710 = 16K + * Note that we cannot try to test for SRAM here because writes + * to secure SRAM will hang the system. Also the SRAM is not + * yet mapped at this point. + */ +void __init omap_detect_sram(void) +{ + omap_sram_base = OMAP1_SRAM_BASE; + + if (cpu_is_omap730()) + omap_sram_size = 0x32000; + else if (cpu_is_omap1510()) + omap_sram_size = 0x80000; + else if (cpu_is_omap1610() || cpu_is_omap1621() || cpu_is_omap1710()) + omap_sram_size = 0x4000; + else if (cpu_is_omap1611()) + omap_sram_size = 0x3e800; + else { + printk(KERN_ERR "Could not detect SRAM size\n"); + omap_sram_size = 0x4000; + } + + printk(KERN_INFO "SRAM size: 0x%lx\n", omap_sram_size); + omap_sram_ceil = omap_sram_base + omap_sram_size; +} + +static struct map_desc omap_sram_io_desc[] __initdata = { + { OMAP1_SRAM_BASE, OMAP1_SRAM_START, 0, MT_DEVICE } +}; + +/* + * In order to use last 2kB of SRAM on 1611b, we must round the size + * up to multiple of PAGE_SIZE. We cannot use ioremap for SRAM, as + * clock init needs SRAM early. + */ +void __init omap_map_sram(void) +{ + if (omap_sram_size == 0) + return; + + omap_sram_io_desc[0].length = (omap_sram_size + PAGE_SIZE-1)/PAGE_SIZE; + omap_sram_io_desc[0].length *= PAGE_SIZE; + iotable_init(omap_sram_io_desc, ARRAY_SIZE(omap_sram_io_desc)); + + /* + * Looks like we need to preserve some bootloader code at the + * beginning of SRAM for jumping to flash for reboot to work... + */ + memset((void *)omap_sram_base + SRAM_BOOTLOADER_SZ, 0, + omap_sram_size - SRAM_BOOTLOADER_SZ); +} + +static void (*_omap_sram_reprogram_clock)(u32 dpllctl, u32 ckctl) = NULL; + +void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl) +{ + if (_omap_sram_reprogram_clock == NULL) + panic("Cannot use SRAM"); + + return _omap_sram_reprogram_clock(dpllctl, ckctl); +} + +void * omap_sram_push(void * start, unsigned long size) +{ + if (size > (omap_sram_ceil - (omap_sram_base + SRAM_BOOTLOADER_SZ))) { + printk(KERN_ERR "Not enough space in SRAM\n"); + return NULL; + } + omap_sram_ceil -= size; + omap_sram_ceil &= ~0x3; + memcpy((void *)omap_sram_ceil, start, size); + + return (void *)omap_sram_ceil; +} + +void __init omap_sram_init(void) +{ + omap_detect_sram(); + omap_map_sram(); + _omap_sram_reprogram_clock = omap_sram_push(sram_reprogram_clock, + sram_reprogram_clock_sz); +} diff --git a/arch/arm/plat-omap/sram.h b/arch/arm/plat-omap/sram.h new file mode 100644 index 000000000000..71984efa6ae8 --- /dev/null +++ b/arch/arm/plat-omap/sram.h @@ -0,0 +1,21 @@ +/* + * linux/arch/arm/plat-omap/sram.h + * + * Interface for functions that need to be run in internal SRAM + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ARCH_ARM_OMAP_SRAM_H +#define __ARCH_ARM_OMAP_SRAM_H + +extern void * omap_sram_push(void * start, unsigned long size); +extern void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl); + +/* Do not use these */ +extern void sram_reprogram_clock(u32 ckctl, u32 dpllctl); +extern unsigned long sram_reprogram_clock_sz; + +#endif diff --git a/arch/arm/plat-omap/usb.c b/arch/arm/plat-omap/usb.c index 25bc4a8dd763..98f1c76f8660 100644 --- a/arch/arm/plat-omap/usb.c +++ b/arch/arm/plat-omap/usb.c @@ -41,6 +41,7 @@ /* These routines should handle the standard chip-specific modes * for usb0/1/2 ports, covering basic mux and transceiver setup. + * Call omap_usb_init() once, from INIT_MACHINE(). * * Some board-*.c files will need to set up additional mux options, * like for suspend handling, vbus sensing, GPIOs, and the D+ pullup. |