summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2018-01-29 11:30:16 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2018-01-29 11:30:16 -0800
commit8e3264710c1c5a3052618bb1b5ef11e13c67a932 (patch)
tree8f8f2b7ae02cefed146dc9457d023b378a43a590
parent0bae60fceeab6958ecd56ba5dbb41fb199babec3 (diff)
parent35a8f1a94d12631afcd55a2a518faa112324f8d1 (diff)
downloadlinux-8e3264710c1c5a3052618bb1b5ef11e13c67a932.tar.bz2
Merge tag 'spi-v4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown: "Quite a quiet release for SPI, there are no changes at all to the core and not that many changes to drivers. Highlights of those driver changes include: - SH MSIOF support for GPIO chip selects contributed by Geert Uytterhoeven. - Full duplex support for a3700 contributed by Maxime Chevallier. - Support for DMA transfers on Atmel devices that require a bounce buffer contributed by Radu Pirea" * tag 'spi-v4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (31 commits) spi: dw: Remove unused members from struct chip_data spi: orion: Fix a resource leak if the optional "axi" clk is deferred spi: a3700: Remove endianness swapping for full-duplex transfers spi: a3700: Remove endianness swapping functions when accessing FIFOs spi: a3700: Add full-duplex support spi: a3700: Allow to enable or disable FIFO mode spi: a3700: Set frequency limits at startup spi: a3700: Clear DATA_OUT when performing a read spi: orion: Fix clock resource by adding an optional bus clock spi: s3c64xx: add SPDX identifier spi: imx: do not access registers while clocks disabled spi: atmel: Implements transfers with bounce buffer spi: sh-msiof: Fix timeout failures for TX-only DMA transfers spi: spi-fsl-dspi: account for const type of of_device_id.data spi: bcm53xx: simplify reading SPI data spi: sirf: account for const type of of_device_id.data spi: pxa2xx: Use gpiod_put() not gpiod_free() spi: pxa2xx: avoid redundant gpio_to_desc(desc_to_gpio()) round-trip spi: sh-msiof: Document hardware limitations related to chip selects spi: sh-msiof: Implement cs-gpios configuration ...
-rw-r--r--Documentation/devicetree/bindings/spi/sh-msiof.txt16
-rw-r--r--Documentation/devicetree/bindings/spi/spi-meson.txt4
-rw-r--r--Documentation/devicetree/bindings/spi/spi-orion.txt9
-rw-r--r--Documentation/devicetree/bindings/spi/spi-xilinx.txt2
-rw-r--r--drivers/spi/spi-armada-3700.c110
-rw-r--r--drivers/spi/spi-atmel.c113
-rw-r--r--drivers/spi/spi-bcm53xx.c26
-rw-r--r--drivers/spi/spi-davinci.c4
-rw-r--r--drivers/spi/spi-dw.c2
-rw-r--r--drivers/spi/spi-fsl-dspi.c9
-rw-r--r--drivers/spi/spi-imx.c26
-rw-r--r--drivers/spi/spi-jcore.c4
-rw-r--r--drivers/spi/spi-meson-spicc.c1
-rw-r--r--drivers/spi/spi-orion.c21
-rw-r--r--drivers/spi/spi-pxa2xx.c4
-rw-r--r--drivers/spi/spi-s3c64xx.c18
-rw-r--r--drivers/spi/spi-sh-msiof.c128
-rw-r--r--drivers/spi/spi-sirf.c4
-rw-r--r--drivers/spi/spi-sun6i.c2
-rw-r--r--drivers/spi/spi-xilinx.c1
-rw-r--r--include/linux/platform_data/spi-s3c64xx.h6
21 files changed, 378 insertions, 132 deletions
diff --git a/Documentation/devicetree/bindings/spi/sh-msiof.txt b/Documentation/devicetree/bindings/spi/sh-msiof.txt
index bdd83959019c..80710f0f0448 100644
--- a/Documentation/devicetree/bindings/spi/sh-msiof.txt
+++ b/Documentation/devicetree/bindings/spi/sh-msiof.txt
@@ -36,7 +36,21 @@ Required properties:
Optional properties:
- clocks : Must contain a reference to the functional clock.
-- num-cs : Total number of chip-selects (default is 1)
+- num-cs : Total number of chip selects (default is 1).
+ Up to 3 native chip selects are supported:
+ 0: MSIOF_SYNC
+ 1: MSIOF_SS1
+ 2: MSIOF_SS2
+ Hardware limitations related to chip selects:
+ - Native chip selects are always deasserted in
+ between transfers that are part of the same
+ message. Use cs-gpios to work around this.
+ - All slaves using native chip selects must use the
+ same spi-cs-high configuration. Use cs-gpios to
+ work around this.
+ - When using GPIO chip selects, at least one native
+ chip select must be left unused, as it will be
+ driven anyway.
- dmas : Must contain a list of two references to DMA
specifiers, one for transmission, and one for
reception.
diff --git a/Documentation/devicetree/bindings/spi/spi-meson.txt b/Documentation/devicetree/bindings/spi/spi-meson.txt
index 825c39cae74a..b7f5e86fed22 100644
--- a/Documentation/devicetree/bindings/spi/spi-meson.txt
+++ b/Documentation/devicetree/bindings/spi/spi-meson.txt
@@ -27,7 +27,9 @@ The Meson SPICC is generic SPI controller for general purpose Full-Duplex
communications with dedicated 16 words RX/TX PIO FIFOs.
Required properties:
- - compatible: should be "amlogic,meson-gx-spicc" on Amlogic GX SoCs.
+ - compatible: should be:
+ "amlogic,meson-gx-spicc" on Amlogic GX and compatible SoCs.
+ "amlogic,meson-axg-spicc" on Amlogic AXG and compatible SoCs
- reg: physical base address and length of the controller registers
- interrupts: The interrupt specifier
- clock-names: Must contain "core"
diff --git a/Documentation/devicetree/bindings/spi/spi-orion.txt b/Documentation/devicetree/bindings/spi/spi-orion.txt
index df8ec31f2f07..8434a65fc12a 100644
--- a/Documentation/devicetree/bindings/spi/spi-orion.txt
+++ b/Documentation/devicetree/bindings/spi/spi-orion.txt
@@ -18,8 +18,17 @@ Required properties:
The eight register sets following the control registers refer to
chip-select lines 0 through 7 respectively.
- cell-index : Which of multiple SPI controllers is this.
+- clocks : pointers to the reference clocks for this device, the first
+ one is the one used for the clock on the spi bus, the
+ second one is optional and is the clock used for the
+ functional part of the controller
+
Optional properties:
- interrupts : Is currently not used.
+- clock-names : names of used clocks, mandatory if the second clock is
+ used, the name must be "core", and "axi" (the latter
+ is only for Armada 7K/8K).
+
Example:
spi@10600 {
diff --git a/Documentation/devicetree/bindings/spi/spi-xilinx.txt b/Documentation/devicetree/bindings/spi/spi-xilinx.txt
index c7b7856bd528..7bf61efc66c8 100644
--- a/Documentation/devicetree/bindings/spi/spi-xilinx.txt
+++ b/Documentation/devicetree/bindings/spi/spi-xilinx.txt
@@ -2,7 +2,7 @@ Xilinx SPI controller Device Tree Bindings
-------------------------------------------------
Required properties:
-- compatible : Should be "xlnx,xps-spi-2.00.a" or "xlnx,xps-spi-2.00.b"
+- compatible : Should be "xlnx,xps-spi-2.00.a", "xlnx,xps-spi-2.00.b" or "xlnx,axi-quad-spi-1.00.a"
- reg : Physical base address and size of SPI registers map.
- interrupts : Property with a value describing the interrupt
number.
diff --git a/drivers/spi/spi-armada-3700.c b/drivers/spi/spi-armada-3700.c
index d65345312527..7dcb14d303eb 100644
--- a/drivers/spi/spi-armada-3700.c
+++ b/drivers/spi/spi-armada-3700.c
@@ -27,6 +27,8 @@
#define DRIVER_NAME "armada_3700_spi"
+#define A3700_SPI_MAX_SPEED_HZ 100000000
+#define A3700_SPI_MAX_PRESCALE 30
#define A3700_SPI_TIMEOUT 10
/* SPI Register Offest */
@@ -184,12 +186,15 @@ static int a3700_spi_pin_mode_set(struct a3700_spi *a3700_spi,
return 0;
}
-static void a3700_spi_fifo_mode_set(struct a3700_spi *a3700_spi)
+static void a3700_spi_fifo_mode_set(struct a3700_spi *a3700_spi, bool enable)
{
u32 val;
val = spireg_read(a3700_spi, A3700_SPI_IF_CFG_REG);
- val |= A3700_SPI_FIFO_MODE;
+ if (enable)
+ val |= A3700_SPI_FIFO_MODE;
+ else
+ val &= ~A3700_SPI_FIFO_MODE;
spireg_write(a3700_spi, A3700_SPI_IF_CFG_REG, val);
}
@@ -297,7 +302,7 @@ static int a3700_spi_init(struct a3700_spi *a3700_spi)
a3700_spi_deactivate_cs(a3700_spi, i);
/* Enable FIFO mode */
- a3700_spi_fifo_mode_set(a3700_spi);
+ a3700_spi_fifo_mode_set(a3700_spi, true);
/* Set SPI mode */
a3700_spi_mode_set(a3700_spi, master->mode_bits);
@@ -416,15 +421,20 @@ static void a3700_spi_transfer_setup(struct spi_device *spi,
struct spi_transfer *xfer)
{
struct a3700_spi *a3700_spi;
- unsigned int byte_len;
a3700_spi = spi_master_get_devdata(spi->master);
a3700_spi_clock_set(a3700_spi, xfer->speed_hz);
- byte_len = xfer->bits_per_word >> 3;
+ /* Use 4 bytes long transfers. Each transfer method has its way to deal
+ * with the remaining bytes for non 4-bytes aligned transfers.
+ */
+ a3700_spi_bytelen_set(a3700_spi, 4);
- a3700_spi_fifo_thres_set(a3700_spi, byte_len);
+ /* Initialize the working buffers */
+ a3700_spi->tx_buf = xfer->tx_buf;
+ a3700_spi->rx_buf = xfer->rx_buf;
+ a3700_spi->buf_len = xfer->len;
}
static void a3700_spi_set_cs(struct spi_device *spi, bool enable)
@@ -491,7 +501,7 @@ static int a3700_spi_fifo_write(struct a3700_spi *a3700_spi)
u32 val;
while (!a3700_is_wfifo_full(a3700_spi) && a3700_spi->buf_len) {
- val = cpu_to_le32(*(u32 *)a3700_spi->tx_buf);
+ val = *(u32 *)a3700_spi->tx_buf;
spireg_write(a3700_spi, A3700_SPI_DATA_OUT_REG, val);
a3700_spi->buf_len -= 4;
a3700_spi->tx_buf += 4;
@@ -514,9 +524,8 @@ static int a3700_spi_fifo_read(struct a3700_spi *a3700_spi)
while (!a3700_is_rfifo_empty(a3700_spi) && a3700_spi->buf_len) {
val = spireg_read(a3700_spi, A3700_SPI_DATA_IN_REG);
if (a3700_spi->buf_len >= 4) {
- u32 data = le32_to_cpu(val);
- memcpy(a3700_spi->rx_buf, &data, 4);
+ memcpy(a3700_spi->rx_buf, &val, 4);
a3700_spi->buf_len -= 4;
a3700_spi->rx_buf += 4;
@@ -579,27 +588,26 @@ static int a3700_spi_prepare_message(struct spi_master *master,
if (ret)
return ret;
- a3700_spi_bytelen_set(a3700_spi, 4);
-
a3700_spi_mode_set(a3700_spi, spi->mode);
return 0;
}
-static int a3700_spi_transfer_one(struct spi_master *master,
+static int a3700_spi_transfer_one_fifo(struct spi_master *master,
struct spi_device *spi,
struct spi_transfer *xfer)
{
struct a3700_spi *a3700_spi = spi_master_get_devdata(master);
int ret = 0, timeout = A3700_SPI_TIMEOUT;
- unsigned int nbits = 0;
+ unsigned int nbits = 0, byte_len;
u32 val;
- a3700_spi_transfer_setup(spi, xfer);
+ /* Make sure we use FIFO mode */
+ a3700_spi_fifo_mode_set(a3700_spi, true);
- a3700_spi->tx_buf = xfer->tx_buf;
- a3700_spi->rx_buf = xfer->rx_buf;
- a3700_spi->buf_len = xfer->len;
+ /* Configure FIFO thresholds */
+ byte_len = xfer->bits_per_word >> 3;
+ a3700_spi_fifo_thres_set(a3700_spi, byte_len);
if (xfer->tx_buf)
nbits = xfer->tx_nbits;
@@ -615,6 +623,11 @@ static int a3700_spi_transfer_one(struct spi_master *master,
a3700_spi_header_set(a3700_spi);
if (xfer->rx_buf) {
+ /* Clear WFIFO, since it's last 2 bytes are shifted out during
+ * a read operation
+ */
+ spireg_write(a3700_spi, A3700_SPI_DATA_OUT_REG, 0);
+
/* Set read data length */
spireg_write(a3700_spi, A3700_SPI_IF_DIN_CNT_REG,
a3700_spi->buf_len);
@@ -729,6 +742,63 @@ out:
return ret;
}
+static int a3700_spi_transfer_one_full_duplex(struct spi_master *master,
+ struct spi_device *spi,
+ struct spi_transfer *xfer)
+{
+ struct a3700_spi *a3700_spi = spi_master_get_devdata(master);
+ u32 val;
+
+ /* Disable FIFO mode */
+ a3700_spi_fifo_mode_set(a3700_spi, false);
+
+ while (a3700_spi->buf_len) {
+
+ /* When we have less than 4 bytes to transfer, switch to 1 byte
+ * mode. This is reset after each transfer
+ */
+ if (a3700_spi->buf_len < 4)
+ a3700_spi_bytelen_set(a3700_spi, 1);
+
+ if (a3700_spi->byte_len == 1)
+ val = *a3700_spi->tx_buf;
+ else
+ val = *(u32 *)a3700_spi->tx_buf;
+
+ spireg_write(a3700_spi, A3700_SPI_DATA_OUT_REG, val);
+
+ /* Wait for all the data to be shifted in / out */
+ while (!(spireg_read(a3700_spi, A3700_SPI_IF_CTRL_REG) &
+ A3700_SPI_XFER_DONE))
+ cpu_relax();
+
+ val = spireg_read(a3700_spi, A3700_SPI_DATA_IN_REG);
+
+ memcpy(a3700_spi->rx_buf, &val, a3700_spi->byte_len);
+
+ a3700_spi->buf_len -= a3700_spi->byte_len;
+ a3700_spi->tx_buf += a3700_spi->byte_len;
+ a3700_spi->rx_buf += a3700_spi->byte_len;
+
+ }
+
+ spi_finalize_current_transfer(master);
+
+ return 0;
+}
+
+static int a3700_spi_transfer_one(struct spi_master *master,
+ struct spi_device *spi,
+ struct spi_transfer *xfer)
+{
+ a3700_spi_transfer_setup(spi, xfer);
+
+ if (xfer->tx_buf && xfer->rx_buf)
+ return a3700_spi_transfer_one_full_duplex(master, spi, xfer);
+
+ return a3700_spi_transfer_one_fifo(master, spi, xfer);
+}
+
static int a3700_spi_unprepare_message(struct spi_master *master,
struct spi_message *message)
{
@@ -778,7 +848,6 @@ static int a3700_spi_probe(struct platform_device *pdev)
master->transfer_one = a3700_spi_transfer_one;
master->unprepare_message = a3700_spi_unprepare_message;
master->set_cs = a3700_spi_set_cs;
- master->flags = SPI_MASTER_HALF_DUPLEX;
master->mode_bits |= (SPI_RX_DUAL | SPI_TX_DUAL |
SPI_RX_QUAD | SPI_TX_QUAD);
@@ -818,6 +887,11 @@ static int a3700_spi_probe(struct platform_device *pdev)
goto error;
}
+ master->max_speed_hz = min_t(unsigned long, A3700_SPI_MAX_SPEED_HZ,
+ clk_get_rate(spi->clk));
+ master->min_speed_hz = DIV_ROUND_UP(clk_get_rate(spi->clk),
+ A3700_SPI_MAX_PRESCALE);
+
ret = a3700_spi_init(spi);
if (ret)
goto error_clk;
diff --git a/drivers/spi/spi-atmel.c b/drivers/spi/spi-atmel.c
index 669470971023..4a11fc0d4136 100644
--- a/drivers/spi/spi-atmel.c
+++ b/drivers/spi/spi-atmel.c
@@ -291,6 +291,10 @@ struct atmel_spi {
struct spi_transfer *current_transfer;
int current_remaining_bytes;
int done_status;
+ dma_addr_t dma_addr_rx_bbuf;
+ dma_addr_t dma_addr_tx_bbuf;
+ void *addr_rx_bbuf;
+ void *addr_tx_bbuf;
struct completion xfer_completion;
@@ -436,6 +440,11 @@ static void atmel_spi_unlock(struct atmel_spi *as) __releases(&as->lock)
spin_unlock_irqrestore(&as->lock, as->flags);
}
+static inline bool atmel_spi_is_vmalloc_xfer(struct spi_transfer *xfer)
+{
+ return is_vmalloc_addr(xfer->tx_buf) || is_vmalloc_addr(xfer->rx_buf);
+}
+
static inline bool atmel_spi_use_dma(struct atmel_spi *as,
struct spi_transfer *xfer)
{
@@ -448,7 +457,12 @@ static bool atmel_spi_can_dma(struct spi_master *master,
{
struct atmel_spi *as = spi_master_get_devdata(master);
- return atmel_spi_use_dma(as, xfer);
+ if (IS_ENABLED(CONFIG_SOC_SAM_V4_V5))
+ return atmel_spi_use_dma(as, xfer) &&
+ !atmel_spi_is_vmalloc_xfer(xfer);
+ else
+ return atmel_spi_use_dma(as, xfer);
+
}
static int atmel_spi_dma_slave_config(struct atmel_spi *as,
@@ -594,6 +608,11 @@ static void dma_callback(void *data)
struct spi_master *master = data;
struct atmel_spi *as = spi_master_get_devdata(master);
+ if (is_vmalloc_addr(as->current_transfer->rx_buf) &&
+ IS_ENABLED(CONFIG_SOC_SAM_V4_V5)) {
+ memcpy(as->current_transfer->rx_buf, as->addr_rx_bbuf,
+ as->current_transfer->len);
+ }
complete(&as->xfer_completion);
}
@@ -744,17 +763,41 @@ static int atmel_spi_next_xfer_dma_submit(struct spi_master *master,
goto err_exit;
/* Send both scatterlists */
- rxdesc = dmaengine_prep_slave_sg(rxchan,
- xfer->rx_sg.sgl, xfer->rx_sg.nents,
- DMA_FROM_DEVICE,
- DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+ if (atmel_spi_is_vmalloc_xfer(xfer) &&
+ IS_ENABLED(CONFIG_SOC_SAM_V4_V5)) {
+ rxdesc = dmaengine_prep_slave_single(rxchan,
+ as->dma_addr_rx_bbuf,
+ xfer->len,
+ DMA_FROM_DEVICE,
+ DMA_PREP_INTERRUPT |
+ DMA_CTRL_ACK);
+ } else {
+ rxdesc = dmaengine_prep_slave_sg(rxchan,
+ xfer->rx_sg.sgl,
+ xfer->rx_sg.nents,
+ DMA_FROM_DEVICE,
+ DMA_PREP_INTERRUPT |
+ DMA_CTRL_ACK);
+ }
if (!rxdesc)
goto err_dma;
- txdesc = dmaengine_prep_slave_sg(txchan,
- xfer->tx_sg.sgl, xfer->tx_sg.nents,
- DMA_TO_DEVICE,
- DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+ if (atmel_spi_is_vmalloc_xfer(xfer) &&
+ IS_ENABLED(CONFIG_SOC_SAM_V4_V5)) {
+ memcpy(as->addr_tx_bbuf, xfer->tx_buf, xfer->len);
+ txdesc = dmaengine_prep_slave_single(txchan,
+ as->dma_addr_tx_bbuf,
+ xfer->len, DMA_TO_DEVICE,
+ DMA_PREP_INTERRUPT |
+ DMA_CTRL_ACK);
+ } else {
+ txdesc = dmaengine_prep_slave_sg(txchan,
+ xfer->tx_sg.sgl,
+ xfer->tx_sg.nents,
+ DMA_TO_DEVICE,
+ DMA_PREP_INTERRUPT |
+ DMA_CTRL_ACK);
+ }
if (!txdesc)
goto err_dma;
@@ -1426,27 +1469,7 @@ static void atmel_get_caps(struct atmel_spi *as)
as->caps.is_spi2 = version > 0x121;
as->caps.has_wdrbt = version >= 0x210;
-#ifdef CONFIG_SOC_SAM_V4_V5
- /*
- * Atmel SoCs based on ARM9 (SAM9x) cores should not use spi_map_buf()
- * since this later function tries to map buffers with dma_map_sg()
- * even if they have not been allocated inside DMA-safe areas.
- * On SoCs based on Cortex A5 (SAMA5Dx), it works anyway because for
- * those ARM cores, the data cache follows the PIPT model.
- * Also the L2 cache controller of SAMA5D2 uses the PIPT model too.
- * In case of PIPT caches, there cannot be cache aliases.
- * However on ARM9 cores, the data cache follows the VIVT model, hence
- * the cache aliases issue can occur when buffers are allocated from
- * DMA-unsafe areas, by vmalloc() for instance, where cache coherency is
- * not taken into account or at least not handled completely (cache
- * lines of aliases are not invalidated).
- * This is not a theorical issue: it was reproduced when trying to mount
- * a UBI file-system on a at91sam9g35ek board.
- */
- as->caps.has_dma_support = false;
-#else
as->caps.has_dma_support = version >= 0x212;
-#endif
as->caps.has_pdc_support = version < 0x212;
}
@@ -1592,6 +1615,30 @@ static int atmel_spi_probe(struct platform_device *pdev)
as->use_pdc = true;
}
+ if (IS_ENABLED(CONFIG_SOC_SAM_V4_V5)) {
+ as->addr_rx_bbuf = dma_alloc_coherent(&pdev->dev,
+ SPI_MAX_DMA_XFER,
+ &as->dma_addr_rx_bbuf,
+ GFP_KERNEL | GFP_DMA);
+ if (!as->addr_rx_bbuf) {
+ as->use_dma = false;
+ } else {
+ as->addr_tx_bbuf = dma_alloc_coherent(&pdev->dev,
+ SPI_MAX_DMA_XFER,
+ &as->dma_addr_tx_bbuf,
+ GFP_KERNEL | GFP_DMA);
+ if (!as->addr_tx_bbuf) {
+ as->use_dma = false;
+ dma_free_coherent(&pdev->dev, SPI_MAX_DMA_XFER,
+ as->addr_rx_bbuf,
+ as->dma_addr_rx_bbuf);
+ }
+ }
+ if (!as->use_dma)
+ dev_info(master->dev.parent,
+ " can not allocate dma coherent memory\n");
+ }
+
if (as->caps.has_dma_support && !as->use_dma)
dev_info(&pdev->dev, "Atmel SPI Controller using PIO only\n");
@@ -1664,6 +1711,14 @@ static int atmel_spi_remove(struct platform_device *pdev)
if (as->use_dma) {
atmel_spi_stop_dma(master);
atmel_spi_release_dma(master);
+ if (IS_ENABLED(CONFIG_SOC_SAM_V4_V5)) {
+ dma_free_coherent(&pdev->dev, SPI_MAX_DMA_XFER,
+ as->addr_tx_bbuf,
+ as->dma_addr_tx_bbuf);
+ dma_free_coherent(&pdev->dev, SPI_MAX_DMA_XFER,
+ as->addr_rx_bbuf,
+ as->dma_addr_rx_bbuf);
+ }
}
spin_lock_irq(&as->lock);
diff --git a/drivers/spi/spi-bcm53xx.c b/drivers/spi/spi-bcm53xx.c
index 6e409eabe1c9..d02ceb7a29d1 100644
--- a/drivers/spi/spi-bcm53xx.c
+++ b/drivers/spi/spi-bcm53xx.c
@@ -27,8 +27,6 @@ struct bcm53xxspi {
struct bcma_device *core;
struct spi_master *master;
void __iomem *mmio_base;
-
- size_t read_offset;
bool bspi; /* Boot SPI mode with memory mapping */
};
@@ -172,8 +170,6 @@ static void bcm53xxspi_buf_write(struct bcm53xxspi *b53spi, u8 *w_buf,
if (!cont)
bcm53xxspi_write(b53spi, B53SPI_MSPI_WRITE_LOCK, 0);
-
- b53spi->read_offset = len;
}
static void bcm53xxspi_buf_read(struct bcm53xxspi *b53spi, u8 *r_buf,
@@ -182,10 +178,10 @@ static void bcm53xxspi_buf_read(struct bcm53xxspi *b53spi, u8 *r_buf,
u32 tmp;
int i;
- for (i = 0; i < b53spi->read_offset + len; i++) {
+ for (i = 0; i < len; i++) {
tmp = B53SPI_CDRAM_CONT | B53SPI_CDRAM_PCS_DISABLE_ALL |
B53SPI_CDRAM_PCS_DSCK;
- if (!cont && i == b53spi->read_offset + len - 1)
+ if (!cont && i == len - 1)
tmp &= ~B53SPI_CDRAM_CONT;
tmp &= ~0x1;
/* Command Register File */
@@ -194,8 +190,7 @@ static void bcm53xxspi_buf_read(struct bcm53xxspi *b53spi, u8 *r_buf,
/* Set queue pointers */
bcm53xxspi_write(b53spi, B53SPI_MSPI_NEWQP, 0);
- bcm53xxspi_write(b53spi, B53SPI_MSPI_ENDQP,
- b53spi->read_offset + len - 1);
+ bcm53xxspi_write(b53spi, B53SPI_MSPI_ENDQP, len - 1);
if (cont)
bcm53xxspi_write(b53spi, B53SPI_MSPI_WRITE_LOCK, 1);
@@ -214,13 +209,11 @@ static void bcm53xxspi_buf_read(struct bcm53xxspi *b53spi, u8 *r_buf,
bcm53xxspi_write(b53spi, B53SPI_MSPI_WRITE_LOCK, 0);
for (i = 0; i < len; ++i) {
- int offset = b53spi->read_offset + i;
+ u16 reg = B53SPI_MSPI_RXRAM + 4 * (1 + i * 2);
/* Data stored in the transmit register file LSB */
- r_buf[i] = (u8)bcm53xxspi_read(b53spi, B53SPI_MSPI_RXRAM + 4 * (1 + offset * 2));
+ r_buf[i] = (u8)bcm53xxspi_read(b53spi, reg);
}
-
- b53spi->read_offset = 0;
}
static int bcm53xxspi_transfer_one(struct spi_master *master,
@@ -238,7 +231,8 @@ static int bcm53xxspi_transfer_one(struct spi_master *master,
left = t->len;
while (left) {
size_t to_write = min_t(size_t, 16, left);
- bool cont = left - to_write > 0;
+ bool cont = !spi_transfer_is_last(master, t) ||
+ left - to_write > 0;
bcm53xxspi_buf_write(b53spi, buf, to_write, cont);
left -= to_write;
@@ -250,9 +244,9 @@ static int bcm53xxspi_transfer_one(struct spi_master *master,
buf = (u8 *)t->rx_buf;
left = t->len;
while (left) {
- size_t to_read = min_t(size_t, 16 - b53spi->read_offset,
- left);
- bool cont = left - to_read > 0;
+ size_t to_read = min_t(size_t, 16, left);
+ bool cont = !spi_transfer_is_last(master, t) ||
+ left - to_read > 0;
bcm53xxspi_buf_read(b53spi, buf, to_read, cont);
left -= to_read;
diff --git a/drivers/spi/spi-davinci.c b/drivers/spi/spi-davinci.c
index 6ddb6ef1fda4..60d59b003aa4 100644
--- a/drivers/spi/spi-davinci.c
+++ b/drivers/spi/spi-davinci.c
@@ -945,6 +945,8 @@ static int davinci_spi_probe(struct platform_device *pdev)
goto free_master;
}
+ init_completion(&dspi->done);
+
ret = platform_get_irq(pdev, 0);
if (ret == 0)
ret = -EINVAL;
@@ -1021,8 +1023,6 @@ static int davinci_spi_probe(struct platform_device *pdev)
dspi->get_rx = davinci_spi_rx_buf_u8;
dspi->get_tx = davinci_spi_tx_buf_u8;
- init_completion(&dspi->done);
-
/* Reset In/OUT SPI module */
iowrite32(0, dspi->base + SPIGCR0);
udelay(100);
diff --git a/drivers/spi/spi-dw.c b/drivers/spi/spi-dw.c
index b217c22ff72f..211cc7d75bf8 100644
--- a/drivers/spi/spi-dw.c
+++ b/drivers/spi/spi-dw.c
@@ -30,13 +30,11 @@
/* Slave spi_dev related */
struct chip_data {
- u8 cs; /* chip select pin */
u8 tmode; /* TR/TO/RO/EEPROM */
u8 type; /* SPI/SSP/MicroWire */
u8 poll_mode; /* 1 means use poll mode */
- u8 enable_dma;
u16 clk_div; /* baud rate divider */
u32 speed_hz; /* baud rate */
void (*cs_control)(u32 command);
diff --git a/drivers/spi/spi-fsl-dspi.c b/drivers/spi/spi-fsl-dspi.c
index f652f70cb8db..0630962ce442 100644
--- a/drivers/spi/spi-fsl-dspi.c
+++ b/drivers/spi/spi-fsl-dspi.c
@@ -903,10 +903,9 @@ static irqreturn_t dspi_interrupt(int irq, void *dev_id)
}
static const struct of_device_id fsl_dspi_dt_ids[] = {
- { .compatible = "fsl,vf610-dspi", .data = (void *)&vf610_data, },
- { .compatible = "fsl,ls1021a-v1.0-dspi",
- .data = (void *)&ls1021a_v1_data, },
- { .compatible = "fsl,ls2085a-dspi", .data = (void *)&ls2085a_data, },
+ { .compatible = "fsl,vf610-dspi", .data = &vf610_data, },
+ { .compatible = "fsl,ls1021a-v1.0-dspi", .data = &ls1021a_v1_data, },
+ { .compatible = "fsl,ls2085a-dspi", .data = &ls2085a_data, },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, fsl_dspi_dt_ids);
@@ -980,7 +979,7 @@ static int dspi_probe(struct platform_device *pdev)
master->dev.of_node = pdev->dev.of_node;
master->cleanup = dspi_cleanup;
- master->mode_bits = SPI_CPOL | SPI_CPHA;
+ master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST;
master->bits_per_word_mask = SPI_BPW_MASK(4) | SPI_BPW_MASK(8) |
SPI_BPW_MASK(16);
diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index 79ddefe4180d..6f57592a7f95 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -1622,6 +1622,11 @@ static int spi_imx_probe(struct platform_device *pdev)
spi_imx->devtype_data->intctrl(spi_imx, 0);
master->dev.of_node = pdev->dev.of_node;
+ ret = spi_bitbang_start(&spi_imx->bitbang);
+ if (ret) {
+ dev_err(&pdev->dev, "bitbang start failed with %d\n", ret);
+ goto out_clk_put;
+ }
/* Request GPIO CS lines, if any */
if (!spi_imx->slave_mode && master->cs_gpios) {
@@ -1640,12 +1645,6 @@ static int spi_imx_probe(struct platform_device *pdev)
}
}
- ret = spi_bitbang_start(&spi_imx->bitbang);
- if (ret) {
- dev_err(&pdev->dev, "bitbang start failed with %d\n", ret);
- goto out_clk_put;
- }
-
dev_info(&pdev->dev, "probed\n");
clk_disable(spi_imx->clk_ipg);
@@ -1668,12 +1667,23 @@ static int spi_imx_remove(struct platform_device *pdev)
{
struct spi_master *master = platform_get_drvdata(pdev);
struct spi_imx_data *spi_imx = spi_master_get_devdata(master);
+ int ret;
spi_bitbang_stop(&spi_imx->bitbang);
+ ret = clk_enable(spi_imx->clk_per);
+ if (ret)
+ return ret;
+
+ ret = clk_enable(spi_imx->clk_ipg);
+ if (ret) {
+ clk_disable(spi_imx->clk_per);
+ return ret;
+ }
+
writel(0, spi_imx->base + MXC_CSPICTRL);
- clk_unprepare(spi_imx->clk_ipg);
- clk_unprepare(spi_imx->clk_per);
+ clk_disable_unprepare(spi_imx->clk_ipg);
+ clk_disable_unprepare(spi_imx->clk_per);
spi_imx_sdma_exit(spi_imx);
spi_master_put(master);
diff --git a/drivers/spi/spi-jcore.c b/drivers/spi/spi-jcore.c
index cebfea5faa4b..dafed6280df3 100644
--- a/drivers/spi/spi-jcore.c
+++ b/drivers/spi/spi-jcore.c
@@ -198,8 +198,10 @@ static int jcore_spi_probe(struct platform_device *pdev)
/* Register our spi controller */
err = devm_spi_register_master(&pdev->dev, master);
- if (err)
+ if (err) {
+ clk_disable(clk);
goto exit;
+ }
return 0;
diff --git a/drivers/spi/spi-meson-spicc.c b/drivers/spi/spi-meson-spicc.c
index 7f8429635502..5c82910e3480 100644
--- a/drivers/spi/spi-meson-spicc.c
+++ b/drivers/spi/spi-meson-spicc.c
@@ -599,6 +599,7 @@ static int meson_spicc_remove(struct platform_device *pdev)
static const struct of_device_id meson_spicc_of_match[] = {
{ .compatible = "amlogic,meson-gx-spicc", },
+ { .compatible = "amlogic,meson-axg-spicc", },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, meson_spicc_of_match);
diff --git a/drivers/spi/spi-orion.c b/drivers/spi/spi-orion.c
index 8974bb340b3a..deca63e82ff6 100644
--- a/drivers/spi/spi-orion.c
+++ b/drivers/spi/spi-orion.c
@@ -94,6 +94,7 @@ struct orion_spi {
struct spi_master *master;
void __iomem *base;
struct clk *clk;
+ struct clk *axi_clk;
const struct orion_spi_dev *devdata;
struct orion_direct_acc direct_access[ORION_NUM_CHIPSELECTS];
@@ -634,6 +635,16 @@ static int orion_spi_probe(struct platform_device *pdev)
if (status)
goto out;
+ /* The following clock is only used by some SoCs */
+ spi->axi_clk = devm_clk_get(&pdev->dev, "axi");
+ if (IS_ERR(spi->axi_clk) &&
+ PTR_ERR(spi->axi_clk) == -EPROBE_DEFER) {
+ status = -EPROBE_DEFER;
+ goto out_rel_clk;
+ }
+ if (!IS_ERR(spi->axi_clk))
+ clk_prepare_enable(spi->axi_clk);
+
tclk_hz = clk_get_rate(spi->clk);
/*
@@ -658,7 +669,7 @@ static int orion_spi_probe(struct platform_device *pdev)
spi->base = devm_ioremap_resource(&pdev->dev, r);
if (IS_ERR(spi->base)) {
status = PTR_ERR(spi->base);
- goto out_rel_clk;
+ goto out_rel_axi_clk;
}
/* Scan all SPI devices of this controller for direct mapped devices */
@@ -696,7 +707,7 @@ static int orion_spi_probe(struct platform_device *pdev)
PAGE_SIZE);
if (!spi->direct_access[cs].vaddr) {
status = -ENOMEM;
- goto out_rel_clk;
+ goto out_rel_axi_clk;
}
spi->direct_access[cs].size = PAGE_SIZE;
@@ -724,6 +735,8 @@ static int orion_spi_probe(struct platform_device *pdev)
out_rel_pm:
pm_runtime_disable(&pdev->dev);
+out_rel_axi_clk:
+ clk_disable_unprepare(spi->axi_clk);
out_rel_clk:
clk_disable_unprepare(spi->clk);
out:
@@ -738,6 +751,7 @@ static int orion_spi_remove(struct platform_device *pdev)
struct orion_spi *spi = spi_master_get_devdata(master);
pm_runtime_get_sync(&pdev->dev);
+ clk_disable_unprepare(spi->axi_clk);
clk_disable_unprepare(spi->clk);
spi_unregister_master(master);
@@ -754,6 +768,7 @@ static int orion_spi_runtime_suspend(struct device *dev)
struct spi_master *master = dev_get_drvdata(dev);
struct orion_spi *spi = spi_master_get_devdata(master);
+ clk_disable_unprepare(spi->axi_clk);
clk_disable_unprepare(spi->clk);
return 0;
}
@@ -763,6 +778,8 @@ static int orion_spi_runtime_resume(struct device *dev)
struct spi_master *master = dev_get_drvdata(dev);
struct orion_spi *spi = spi_master_get_devdata(master);
+ if (!IS_ERR(spi->axi_clk))
+ clk_prepare_enable(spi->axi_clk);
return clk_prepare_enable(spi->clk);
}
#endif
diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c
index 4cb515a3104c..b0822d1dba29 100644
--- a/drivers/spi/spi-pxa2xx.c
+++ b/drivers/spi/spi-pxa2xx.c
@@ -1237,7 +1237,7 @@ static int setup_cs(struct spi_device *spi, struct chip_data *chip,
* different chip_info, release previously requested GPIO
*/
if (chip->gpiod_cs) {
- gpio_free(desc_to_gpio(chip->gpiod_cs));
+ gpiod_put(chip->gpiod_cs);
chip->gpiod_cs = NULL;
}
@@ -1417,7 +1417,7 @@ static void cleanup(struct spi_device *spi)
if (drv_data->ssp_type != CE4100_SSP && !drv_data->cs_gpiods &&
chip->gpiod_cs)
- gpio_free(desc_to_gpio(chip->gpiod_cs));
+ gpiod_put(chip->gpiod_cs);
kfree(chip);
}
diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c
index de7df20f8712..baa3a9fa2638 100644
--- a/drivers/spi/spi-s3c64xx.c
+++ b/drivers/spi/spi-s3c64xx.c
@@ -1,17 +1,7 @@
-/*
- * Copyright (C) 2009 Samsung Electronics Ltd.
- * Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright (c) 2009 Samsung Electronics Co., Ltd.
+// Jaswinder Singh <jassi.brar@samsung.com>
#include <linux/init.h>
#include <linux/module.h>
diff --git a/drivers/spi/spi-sh-msiof.c b/drivers/spi/spi-sh-msiof.c
index fcd261f98b9f..c5dcfb434a49 100644
--- a/drivers/spi/spi-sh-msiof.c
+++ b/drivers/spi/spi-sh-msiof.c
@@ -19,6 +19,7 @@
#include <linux/dmaengine.h>
#include <linux/err.h>
#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/kernel.h>
@@ -55,9 +56,14 @@ struct sh_msiof_spi_priv {
void *rx_dma_page;
dma_addr_t tx_dma_addr;
dma_addr_t rx_dma_addr;
+ unsigned short unused_ss;
+ bool native_cs_inited;
+ bool native_cs_high;
bool slave_aborted;
};
+#define MAX_SS 3 /* Maximum number of native chip selects */
+
#define TMDR1 0x00 /* Transmit Mode Register 1 */
#define TMDR2 0x04 /* Transmit Mode Register 2 */
#define TMDR3 0x08 /* Transmit Mode Register 3 */
@@ -91,6 +97,8 @@ struct sh_msiof_spi_priv {
#define MDR1_XXSTP 0x00000001 /* Transmission/Reception Stop on FIFO */
/* TMDR1 */
#define TMDR1_PCON 0x40000000 /* Transfer Signal Connection */
+#define TMDR1_SYNCCH_MASK 0xc000000 /* Synchronization Signal Channel Select */
+#define TMDR1_SYNCCH_SHIFT 26 /* 0=MSIOF_SYNC, 1=MSIOF_SS1, 2=MSIOF_SS2 */
/* TMDR2 and RMDR2 */
#define MDR2_BITLEN1(i) (((i) - 1) << 24) /* Data Size (8-32 bits) */
@@ -324,7 +332,7 @@ static u32 sh_msiof_spi_get_dtdl_and_syncdl(struct sh_msiof_spi_priv *p)
return val;
}
-static void sh_msiof_spi_set_pin_regs(struct sh_msiof_spi_priv *p,
+static void sh_msiof_spi_set_pin_regs(struct sh_msiof_spi_priv *p, u32 ss,
u32 cpol, u32 cpha,
u32 tx_hi_z, u32 lsb_first, u32 cs_high)
{
@@ -342,10 +350,13 @@ static void sh_msiof_spi_set_pin_regs(struct sh_msiof_spi_priv *p,
tmp |= !cs_high << MDR1_SYNCAC_SHIFT;
tmp |= lsb_first << MDR1_BITLSB_SHIFT;
tmp |= sh_msiof_spi_get_dtdl_and_syncdl(p);
- if (spi_controller_is_slave(p->master))
+ if (spi_controller_is_slave(p->master)) {
sh_msiof_write(p, TMDR1, tmp | TMDR1_PCON);
- else
- sh_msiof_write(p, TMDR1, tmp | MDR1_TRMD | TMDR1_PCON);
+ } else {
+ sh_msiof_write(p, TMDR1,
+ tmp | MDR1_TRMD | TMDR1_PCON |
+ (ss < MAX_SS ? ss : 0) << TMDR1_SYNCCH_SHIFT);
+ }
if (p->master->flags & SPI_MASTER_MUST_TX) {
/* These bits are reserved if RX needs TX */
tmp &= ~0x0000ffff;
@@ -528,8 +539,7 @@ static int sh_msiof_spi_setup(struct spi_device *spi)
{
struct device_node *np = spi->master->dev.of_node;
struct sh_msiof_spi_priv *p = spi_master_get_devdata(spi->master);
-
- pm_runtime_get_sync(&p->pdev->dev);
+ u32 clr, set, tmp;
if (!np) {
/*
@@ -539,19 +549,31 @@ static int sh_msiof_spi_setup(struct spi_device *spi)
spi->cs_gpio = (uintptr_t)spi->controller_data;
}
- /* Configure pins before deasserting CS */
- sh_msiof_spi_set_pin_regs(p, !!(spi->mode & SPI_CPOL),
- !!(spi->mode & SPI_CPHA),
- !!(spi->mode & SPI_3WIRE),
- !!(spi->mode & SPI_LSB_FIRST),
- !!(spi->mode & SPI_CS_HIGH));
+ if (gpio_is_valid(spi->cs_gpio)) {
+ gpio_direction_output(spi->cs_gpio, !(spi->mode & SPI_CS_HIGH));
+ return 0;
+ }
- if (spi->cs_gpio >= 0)
- gpio_set_value(spi->cs_gpio, !(spi->mode & SPI_CS_HIGH));
+ if (spi_controller_is_slave(p->master))
+ return 0;
+ if (p->native_cs_inited &&
+ (p->native_cs_high == !!(spi->mode & SPI_CS_HIGH)))
+ return 0;
+ /* Configure native chip select mode/polarity early */
+ clr = MDR1_SYNCMD_MASK;
+ set = MDR1_TRMD | TMDR1_PCON | MDR1_SYNCMD_SPI;
+ if (spi->mode & SPI_CS_HIGH)
+ clr |= BIT(MDR1_SYNCAC_SHIFT);
+ else
+ set |= BIT(MDR1_SYNCAC_SHIFT);
+ pm_runtime_get_sync(&p->pdev->dev);
+ tmp = sh_msiof_read(p, TMDR1) & ~clr;
+ sh_msiof_write(p, TMDR1, tmp | set);
pm_runtime_put(&p->pdev->dev);
-
+ p->native_cs_high = spi->mode & SPI_CS_HIGH;
+ p->native_cs_inited = true;
return 0;
}
@@ -560,13 +582,20 @@ static int sh_msiof_prepare_message(struct spi_master *master,
{
struct sh_msiof_spi_priv *p = spi_master_get_devdata(master);
const struct spi_device *spi = msg->spi;
+ u32 ss, cs_high;
/* Configure pins before asserting CS */
- sh_msiof_spi_set_pin_regs(p, !!(spi->mode & SPI_CPOL),
+ if (gpio_is_valid(spi->cs_gpio)) {
+ ss = p->unused_ss;
+ cs_high = p->native_cs_high;
+ } else {
+ ss = spi->chip_select;
+ cs_high = !!(spi->mode & SPI_CS_HIGH);
+ }
+ sh_msiof_spi_set_pin_regs(p, ss, !!(spi->mode & SPI_CPOL),
!!(spi->mode & SPI_CPHA),
!!(spi->mode & SPI_3WIRE),
- !!(spi->mode & SPI_LSB_FIRST),
- !!(spi->mode & SPI_CS_HIGH));
+ !!(spi->mode & SPI_LSB_FIRST), cs_high);
return 0;
}
@@ -784,11 +813,21 @@ static int sh_msiof_dma_once(struct sh_msiof_spi_priv *p, const void *tx,
goto stop_dma;
}
- /* wait for tx fifo to be emptied / rx fifo to be filled */
+ /* wait for tx/rx DMA completion */
ret = sh_msiof_wait_for_completion(p);
if (ret)
goto stop_reset;
+ if (!rx) {
+ reinit_completion(&p->done);
+ sh_msiof_write(p, IER, IER_TEOFE);
+
+ /* wait for tx fifo to be emptied */
+ ret = sh_msiof_wait_for_completion(p);
+ if (ret)
+ goto stop_reset;
+ }
+
/* clear status bits */
sh_msiof_reset_str(p);
@@ -912,9 +951,8 @@ static int sh_msiof_transfer_one(struct spi_master *master,
ret = sh_msiof_dma_once(p, tx_buf, rx_buf, l);
if (ret == -EAGAIN) {
- pr_warn_once("%s %s: DMA not available, falling back to PIO\n",
- dev_driver_string(&p->pdev->dev),
- dev_name(&p->pdev->dev));
+ dev_warn_once(&p->pdev->dev,
+ "DMA not available, falling back to PIO\n");
break;
}
if (ret)
@@ -1071,6 +1109,45 @@ static struct sh_msiof_spi_info *sh_msiof_spi_parse_dt(struct device *dev)
}
#endif
+static int sh_msiof_get_cs_gpios(struct sh_msiof_spi_priv *p)
+{
+ struct device *dev = &p->pdev->dev;
+ unsigned int used_ss_mask = 0;
+ unsigned int cs_gpios = 0;
+ unsigned int num_cs, i;
+ int ret;
+
+ ret = gpiod_count(dev, "cs");
+ if (ret <= 0)
+ return 0;
+
+ num_cs = max_t(unsigned int, ret, p->master->num_chipselect);
+ for (i = 0; i < num_cs; i++) {
+ struct gpio_desc *gpiod;
+
+ gpiod = devm_gpiod_get_index(dev, "cs", i, GPIOD_ASIS);
+ if (!IS_ERR(gpiod)) {
+ cs_gpios++;
+ continue;
+ }
+
+ if (PTR_ERR(gpiod) != -ENOENT)
+ return PTR_ERR(gpiod);
+
+ if (i >= MAX_SS) {
+ dev_err(dev, "Invalid native chip select %d\n", i);
+ return -EINVAL;
+ }
+ used_ss_mask |= BIT(i);
+ }
+ p->unused_ss = ffz(used_ss_mask);
+ if (cs_gpios && p->unused_ss >= MAX_SS) {
+ dev_err(dev, "No unused native chip select available\n");
+ return -EINVAL;
+ }
+ return 0;
+}
+
static struct dma_chan *sh_msiof_request_dma_chan(struct device *dev,
enum dma_transfer_direction dir, unsigned int id, dma_addr_t port_addr)
{
@@ -1284,13 +1361,18 @@ static int sh_msiof_spi_probe(struct platform_device *pdev)
if (p->info->rx_fifo_override)
p->rx_fifo_size = p->info->rx_fifo_override;
+ /* Setup GPIO chip selects */
+ master->num_chipselect = p->info->num_chipselect;
+ ret = sh_msiof_get_cs_gpios(p);
+ if (ret)
+ goto err1;
+
/* init master code */
master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
master->mode_bits |= SPI_LSB_FIRST | SPI_3WIRE;
master->flags = chipdata->master_flags;
master->bus_num = pdev->id;
master->dev.of_node = pdev->dev.of_node;
- master->num_chipselect = p->info->num_chipselect;
master->setup = sh_msiof_spi_setup;
master->prepare_message = sh_msiof_prepare_message;
master->slave_abort = sh_msiof_slave_abort;
diff --git a/drivers/spi/spi-sirf.c b/drivers/spi/spi-sirf.c
index bbb1a275f718..f009d76f96b1 100644
--- a/drivers/spi/spi-sirf.c
+++ b/drivers/spi/spi-sirf.c
@@ -1072,7 +1072,7 @@ static int spi_sirfsoc_probe(struct platform_device *pdev)
struct sirfsoc_spi *sspi;
struct spi_master *master;
struct resource *mem_res;
- struct sirf_spi_comp_data *spi_comp_data;
+ const struct sirf_spi_comp_data *spi_comp_data;
int irq;
int ret;
const struct of_device_id *match;
@@ -1092,7 +1092,7 @@ static int spi_sirfsoc_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, master);
sspi = spi_master_get_devdata(master);
sspi->fifo_full_offset = ilog2(sspi->fifo_size);
- spi_comp_data = (struct sirf_spi_comp_data *)match->data;
+ spi_comp_data = match->data;
sspi->regs = spi_comp_data->regs;
sspi->type = spi_comp_data->type;
sspi->fifo_level_chk_mask = (sspi->fifo_size / 4) - 1;
diff --git a/drivers/spi/spi-sun6i.c b/drivers/spi/spi-sun6i.c
index fb38234249a8..8533f4edd00a 100644
--- a/drivers/spi/spi-sun6i.c
+++ b/drivers/spi/spi-sun6i.c
@@ -541,7 +541,7 @@ err_free_master:
static int sun6i_spi_remove(struct platform_device *pdev)
{
- pm_runtime_disable(&pdev->dev);
+ pm_runtime_force_suspend(&pdev->dev);
return 0;
}
diff --git a/drivers/spi/spi-xilinx.c b/drivers/spi/spi-xilinx.c
index e0b9fe1d0e37..63fedc49ae9c 100644
--- a/drivers/spi/spi-xilinx.c
+++ b/drivers/spi/spi-xilinx.c
@@ -381,6 +381,7 @@ static int xilinx_spi_find_buffer_size(struct xilinx_spi *xspi)
}
static const struct of_device_id xilinx_spi_of_match[] = {
+ { .compatible = "xlnx,axi-quad-spi-1.00.a", },
{ .compatible = "xlnx,xps-spi-2.00.a", },
{ .compatible = "xlnx,xps-spi-2.00.b", },
{}
diff --git a/include/linux/platform_data/spi-s3c64xx.h b/include/linux/platform_data/spi-s3c64xx.h
index da79774078a7..773daf7915a3 100644
--- a/include/linux/platform_data/spi-s3c64xx.h
+++ b/include/linux/platform_data/spi-s3c64xx.h
@@ -1,10 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
/*
* Copyright (C) 2009 Samsung Electronics Ltd.
* Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*/
#ifndef __SPI_S3C64XX_H