summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2019-05-07 18:02:51 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2019-05-07 18:02:51 -0700
commit8b35ad6232c462b02e397e87ce702bcddd4ba543 (patch)
tree921cd619336b1ff7f0dde7bdbf9f898ffe4cedae
parentf678d6da749983791850876e3421e7c48a0a7127 (diff)
parent0db37915d912e8dc6588f25da76d3ed36718d92f (diff)
downloadlinux-8b35ad6232c462b02e397e87ce702bcddd4ba543.tar.bz2
Merge tag 'leds-for-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds
Pull LED updates from Jacek Anaszewski: "LED core fixes and improvements: - avoid races with workqueue - Kconfig: pedantic cleanup - small fixes for Flash class description leds-lt3593: - remove unneeded assignment in lt3593_led_probe - drop pdata handling code leds-blinkm: - clean up double assignment to data->i2c_addr leds-pca955x, leds-pca963x: - revert ACPI support, as it turned out that there is no evidence of officially registered ACPI IDs for these devices. - make use of device property API leds-as3645a: - switch to fwnode property API LED related addition to ACPI documentation: - document how to refer to LEDs from remote nodes LED related fix to ALSA line6/toneport driver: - avoid polluting led_* namespace And lm3532 driver relocation from MFD to LED subsystem, accompanied by various improvements and optimizations; it entails also a change in omap4-droid4-xt894.dts: - leds: lm3532: Introduce the lm3532 LED driver - mfd: ti-lmu: Remove LM3532 backlight driver references - ARM: dts: omap4-droid4: Update backlight dt properties - dt: lm3532: Add lm3532 dt doc and update ti_lmu doc" * tag 'leds-for-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: leds: avoid races with workqueue ALSA: line6: Avoid polluting led_* namespace leds: lm3532: Introduce the lm3532 LED driver mfd: ti-lmu: Remove LM3532 backlight driver references ARM: dts: omap4-droid4: Update backlight dt properties dt: lm3532: Add lm3532 dt doc and update ti_lmu doc leds: Small fixes for Flash class description leds: blinkm: clean up double assignment to data->i2c_addr leds: pca963x: Make use of device property API leds: pca955x: Make use of device property API leds: lt3593: Remove unneeded assignment in lt3593_led_probe leds: lt3593: drop pdata handling code leds: pca955x: Revert "Add ACPI support" leds: pca963x: Revert "Add ACPI support" drivers: leds: Kconfig: pedantic cleanups ACPI: Document how to refer to LEDs from remote nodes leds: as3645a: Switch to fwnode property API
-rw-r--r--Documentation/acpi/dsd/leds.txt99
-rw-r--r--Documentation/devicetree/bindings/leds/leds-lm3532.txt101
-rw-r--r--Documentation/devicetree/bindings/mfd/ti-lmu.txt20
-rw-r--r--arch/arm/boot/dts/omap4-droid4-xt894.dts27
-rw-r--r--drivers/leds/Kconfig33
-rw-r--r--drivers/leds/Makefile1
-rw-r--r--drivers/leds/led-class.c1
-rw-r--r--drivers/leds/led-core.c5
-rw-r--r--drivers/leds/leds-as3645a.c93
-rw-r--r--drivers/leds/leds-blinkm.c1
-rw-r--r--drivers/leds/leds-lm3532.c683
-rw-r--r--drivers/leds/leds-lt3593.c64
-rw-r--r--drivers/leds/leds-pca955x.c57
-rw-r--r--drivers/leds/leds-pca963x.c66
-rw-r--r--drivers/mfd/ti-lmu.c11
-rw-r--r--include/linux/mfd/ti-lmu-register.h44
-rw-r--r--include/linux/mfd/ti-lmu.h1
-rw-r--r--sound/usb/line6/toneport.c8
18 files changed, 1023 insertions, 292 deletions
diff --git a/Documentation/acpi/dsd/leds.txt b/Documentation/acpi/dsd/leds.txt
new file mode 100644
index 000000000000..81a63af42ed2
--- /dev/null
+++ b/Documentation/acpi/dsd/leds.txt
@@ -0,0 +1,99 @@
+Describing and referring to LEDs in ACPI
+
+Individual LEDs are described by hierarchical data extension [6] nodes under the
+device node, the LED driver chip. The "reg" property in the LED specific nodes
+tells the numerical ID of each individual LED output to which the LEDs are
+connected. [3] The hierarchical data nodes are named "led@X", where X is the
+number of the LED output.
+
+Referring to LEDs in Device tree is documented in [4], in "flash-leds" property
+documentation. In short, LEDs are directly referred to by using phandles.
+
+While Device tree allows referring to any node in the tree[1], in ACPI
+references are limited to device nodes only [2]. For this reason using the same
+mechanism on ACPI is not possible. A mechanism to refer to non-device ACPI nodes
+is documented in [7].
+
+ACPI allows (as does DT) using integer arguments after the reference. A
+combination of the LED driver device reference and an integer argument,
+referring to the "reg" property of the relevant LED, is used to identify
+individual LEDs. The value of the "reg" property is a contract between the
+firmware and software, it uniquely identifies the LED driver outputs.
+
+Under the LED driver device, The first hierarchical data extension package list
+entry shall contain the string "led@" followed by the number of the LED,
+followed by the referred object name. That object shall be named "LED" followed
+by the number of the LED.
+
+An ASL example of a camera sensor device and a LED driver device for two LEDs.
+Objects not relevant for LEDs or the references to them have been omitted.
+
+ Device (LED)
+ {
+ Name (_DSD, Package () {
+ ToUUID("dbb8e3e6-5886-4ba6-8795-1319f52a966b"),
+ Package () {
+ Package () { "led@0", LED0 },
+ Package () { "led@1", LED1 },
+ }
+ })
+ Name (LED0, Package () {
+ ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
+ Package () {
+ Package () { "reg", 0 },
+ Package () { "flash-max-microamp", 1000000 },
+ Package () { "flash-timeout-us", 200000 },
+ Package () { "led-max-microamp", 100000 },
+ Package () { "label", "white:flash" },
+ }
+ })
+ Name (LED1, Package () {
+ ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
+ Package () {
+ Package () { "reg", 1 },
+ Package () { "led-max-microamp", 10000 },
+ Package () { "label", "red:indicator" },
+ }
+ })
+ }
+
+ Device (SEN)
+ {
+ Name (_DSD, Package () {
+ ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
+ Package () {
+ Package () {
+ "flash-leds",
+ Package () { ^LED, "led@0", ^LED, "led@1" },
+ }
+ }
+ })
+ }
+
+where
+
+ LED LED driver device
+ LED0 First LED
+ LED1 Second LED
+ SEN Camera sensor device (or another device the LED is
+ related to)
+
+[1] Device tree. <URL:http://www.devicetree.org>, referenced 2019-02-21.
+
+[2] Advanced Configuration and Power Interface Specification.
+ <URL:https://uefi.org/sites/default/files/resources/ACPI_6_3_final_Jan30.pdf>,
+ referenced 2019-02-21.
+
+[3] Documentation/devicetree/bindings/leds/common.txt
+
+[4] Documentation/devicetree/bindings/media/video-interfaces.txt
+
+[5] Device Properties UUID For _DSD.
+ <URL:http://www.uefi.org/sites/default/files/resources/_DSD-device-properties-UUID.pdf>,
+ referenced 2019-02-21.
+
+[6] Hierarchical Data Extension UUID For _DSD.
+ <URL:http://www.uefi.org/sites/default/files/resources/_DSD-hierarchical-data-extension-UUID-v1.1.pdf>,
+ referenced 2019-02-21.
+
+[7] Documentation/acpi/dsd/data-node-reference.txt
diff --git a/Documentation/devicetree/bindings/leds/leds-lm3532.txt b/Documentation/devicetree/bindings/leds/leds-lm3532.txt
new file mode 100644
index 000000000000..c087f85ddddc
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-lm3532.txt
@@ -0,0 +1,101 @@
+* Texas Instruments - lm3532 White LED driver with ambient light sensing
+capability.
+
+The LM3532 provides the 3 high-voltage, low-side current sinks. The device is
+programmable over an I2C-compatible interface and has independent
+current control for all three channels. The adaptive current regulation
+method allows for different LED currents in each current sink thus allowing
+for a wide variety of backlight and keypad applications.
+
+The main features of the LM3532 include dual ambient light sensor inputs
+each with 32 internal voltage setting resistors, 8-bit logarithmic and linear
+brightness control, dual external PWM brightness control inputs, and up to
+1000:1 dimming ratio with programmable fade in and fade out settings.
+
+Required properties:
+ - compatible : "ti,lm3532"
+ - reg : I2C slave address
+ - #address-cells : 1
+ - #size-cells : 0
+
+Optional properties:
+ - enable-gpios : gpio pin to enable (active high)/disable the device.
+ - ramp-up-us - The Run time ramp rates/step are from one current
+ set-point to another after the device has reached its
+ initial target set point from turn-on
+ - ramp-down-us - The Run time ramp rates/step are from one current
+ set-point to another after the device has reached its
+ initial target set point from turn-on
+ Range for ramp settings: 8us - 65536us
+
+Optional properties if ALS mode is used:
+ - ti,als-vmin - Minimum ALS voltage defined in Volts
+ - ti,als-vmax - Maximum ALS voltage defined in Volts
+ Per the data sheet the max ALS voltage is 2V and the min is 0V
+
+ - ti,als1-imp-sel - ALS1 impedance resistor selection in Ohms
+ - ti,als2-imp-sel - ALS2 impedance resistor selection in Ohms
+ Range for impedance select: 37000 Ohms - 1190 Ohms
+ Values above 37kohms will be set to the "High Impedance" setting
+
+ - ti,als-avrg-time-us - Determines the length of time the device needs to
+ average the two ALS inputs. This is only used if
+ the input mode is LM3532_ALS_INPUT_AVRG.
+ Range: 17920us - 2293760us
+ - ti,als-input-mode - Determines how the device uses the attached ALS
+ devices.
+ 0x00 - ALS1 and ALS2 input average
+ 0x01 - ALS1 Input
+ 0x02 - ALS2 Input
+ 0x03 - Max of ALS1 and ALS2
+
+Required child properties:
+ - reg : Indicates control bank the LED string is controlled by
+ - led-sources : see Documentation/devicetree/bindings/leds/common.txt
+ - ti,led-mode : Defines if the LED strings are manually controlled or
+ if the LED strings are controlled by the ALS.
+ 0x00 - LED strings are I2C controlled via full scale
+ brightness control register
+ 0x01 - LED strings are ALS controlled
+
+Optional LED child properties:
+ - label : see Documentation/devicetree/bindings/leds/common.txt
+ - linux,default-trigger :
+ see Documentation/devicetree/bindings/leds/common.txt
+
+Example:
+led-controller@38 {
+ compatible = "ti,lm3532";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x38>;
+
+ enable-gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
+ ramp-up-us = <1024>;
+ ramp-down-us = <65536>;
+
+ ti,als-vmin = <0>;
+ ti,als-vmax = <2000>;
+ ti,als1-imp-sel = <4110>;
+ ti,als2-imp-sel = <2180>;
+ ti,als-avrg-time-us = <17920>;
+ ti,als-input-mode = <0x00>;
+
+ led@0 {
+ reg = <0>;
+ led-sources = <2>;
+ ti,led-mode = <1>;
+ label = ":backlight";
+ linux,default-trigger = "backlight";
+ };
+
+ led@1 {
+ reg = <1>;
+ led-sources = <1>;
+ ti,led-mode = <0>;
+ label = ":kbd_backlight";
+ };
+};
+
+For more product information please see the links below:
+http://www.ti.com/product/LM3532
diff --git a/Documentation/devicetree/bindings/mfd/ti-lmu.txt b/Documentation/devicetree/bindings/mfd/ti-lmu.txt
index c885cf89b8ce..980394d701a7 100644
--- a/Documentation/devicetree/bindings/mfd/ti-lmu.txt
+++ b/Documentation/devicetree/bindings/mfd/ti-lmu.txt
@@ -4,7 +4,6 @@ TI LMU driver supports lighting devices below.
Name Child nodes
------ ---------------------------------
- LM3532 Backlight
LM3631 Backlight and regulator
LM3632 Backlight and regulator
LM3633 Backlight, LED and fault monitor
@@ -13,7 +12,6 @@ TI LMU driver supports lighting devices below.
Required properties:
- compatible: Should be one of:
- "ti,lm3532"
"ti,lm3631"
"ti,lm3632"
"ti,lm3633"
@@ -23,7 +21,6 @@ Required properties:
0x11 for LM3632
0x29 for LM3631
0x36 for LM3633, LM3697
- 0x38 for LM3532
0x63 for LM3695
Optional property:
@@ -47,23 +44,6 @@ Optional nodes:
[2] ../leds/leds-lm3633.txt
[3] ../regulator/lm363x-regulator.txt
-lm3532@38 {
- compatible = "ti,lm3532";
- reg = <0x38>;
-
- enable-gpios = <&pioC 2 GPIO_ACTIVE_HIGH>;
-
- backlight {
- compatible = "ti,lm3532-backlight";
-
- lcd {
- led-sources = <0 1 2>;
- ramp-up-msec = <30>;
- ramp-down-msec = <0>;
- };
- };
-};
-
lm3631@29 {
compatible = "ti,lm3631";
reg = <0x29>;
diff --git a/arch/arm/boot/dts/omap4-droid4-xt894.dts b/arch/arm/boot/dts/omap4-droid4-xt894.dts
index e21ec929f096..714863f8f261 100644
--- a/arch/arm/boot/dts/omap4-droid4-xt894.dts
+++ b/arch/arm/boot/dts/omap4-droid4-xt894.dts
@@ -214,7 +214,6 @@
width-mm = <50>;
height-mm = <89>;
- backlight = <&lcd_backlight>;
panel-timing {
clock-frequency = <0>; /* Calculated by dsi */
@@ -383,20 +382,30 @@
};
&i2c1 {
- lm3532@38 {
+ led-controller@38 {
compatible = "ti,lm3532";
+ #address-cells = <1>;
+ #size-cells = <0>;
reg = <0x38>;
enable-gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
- lcd_backlight: backlight {
- compatible = "ti,lm3532-backlight";
+ ramp-up-us = <1024>;
+ ramp-down-us = <8193>;
- lcd {
- led-sources = <0 1 2>;
- ramp-up-msec = <1>;
- ramp-down-msec = <0>;
- };
+ led@0 {
+ reg = <0>;
+ led-sources = <2>;
+ ti,led-mode = <0>;
+ label = ":backlight";
+ linux,default-trigger = "backlight";
+ };
+
+ led@1 {
+ reg = <1>;
+ led-sources = <1>;
+ ti,led-mode = <0>;
+ label = ":kbd_backlight";
};
};
};
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index a72f97fca57b..f3000ccb8d35 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -23,8 +23,8 @@ config LEDS_CLASS_FLASH
tristate "LED Flash Class Support"
depends on LEDS_CLASS
help
- This option enables the flash led sysfs class in /sys/class/leds.
- It wrapps LED Class and adds flash LEDs specific sysfs attributes
+ This option enables the flash LED sysfs class in /sys/class/leds.
+ It wraps LED Class and adds flash LEDs specific sysfs attributes
and kernel internal API to it. You'll need this to provide support
for the flash related features of a LED device. It can be built
as a module.
@@ -56,7 +56,7 @@ config LEDS_AAT1290
depends on OF
depends on PINCTRL
help
- This option enables support for the LEDs on the AAT1290.
+ This option enables support for the LEDs on the AAT1290.
config LEDS_AN30259A
tristate "LED support for Panasonic AN30259A"
@@ -138,6 +138,16 @@ config LEDS_LM3530
controlled manually or using PWM input or using ambient
light automatically.
+config LEDS_LM3532
+ tristate "LCD Backlight driver for LM3532"
+ depends on LEDS_CLASS
+ depends on I2C
+ help
+ This option enables support for the LCD backlight using
+ LM3532 ambient light sensor chip. This ALS chip can be
+ controlled manually or using PWM input or using ambient
+ light automatically.
+
config LEDS_LM3533
tristate "LED support for LM3533"
depends on LEDS_CLASS
@@ -413,13 +423,13 @@ config LEDS_CLEVO_MAIL
This module can drive the mail LED for the following notebooks:
- Clevo D400P
- Clevo D410J
- Clevo D410V
- Clevo D400V/D470V (not tested, but might work)
- Clevo M540N
- Clevo M5x0N (not tested, but might work)
- Positivo Mobile (Clevo M5x0V)
+ Clevo D400P
+ Clevo D410J
+ Clevo D410V
+ Clevo D400V/D470V (not tested, but might work)
+ Clevo M540N
+ Clevo M5x0N (not tested, but might work)
+ Positivo Mobile (Clevo M5x0V)
If your model is not listed here you can try the "nodetect"
module parameter.
@@ -462,7 +472,7 @@ config LEDS_WM831X_STATUS
depends on MFD_WM831X
help
This option enables support for the status LEDs of the WM831x
- series of PMICs.
+ series of PMICs.
config LEDS_WM8350
tristate "LED Support for WM8350 AudioPlus PMIC"
@@ -533,6 +543,7 @@ config LEDS_LT3593
tristate "LED driver for LT3593 controllers"
depends on LEDS_CLASS
depends on GPIOLIB || COMPILE_TEST
+ depends on OF
help
This option enables support for LEDs driven by a Linear Technology
LT3593 controller. This controller uses a special one-wire pulse
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index 4c1b0054f379..7a8b1f55d459 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -18,6 +18,7 @@ obj-$(CONFIG_LEDS_BD2802) += leds-bd2802.o
obj-$(CONFIG_LEDS_CPCAP) += leds-cpcap.o
obj-$(CONFIG_LEDS_LOCOMO) += leds-locomo.o
obj-$(CONFIG_LEDS_LM3530) += leds-lm3530.o
+obj-$(CONFIG_LEDS_LM3532) += leds-lm3532.o
obj-$(CONFIG_LEDS_LM3533) += leds-lm3533.o
obj-$(CONFIG_LEDS_LM3642) += leds-lm3642.o
obj-$(CONFIG_LEDS_MIKROTIK_RB532) += leds-rb532.o
diff --git a/drivers/leds/led-class.c b/drivers/leds/led-class.c
index 3c7e3487b373..85848c5da705 100644
--- a/drivers/leds/led-class.c
+++ b/drivers/leds/led-class.c
@@ -57,6 +57,7 @@ static ssize_t brightness_store(struct device *dev,
if (state == LED_OFF)
led_trigger_remove(led_cdev);
led_set_brightness(led_cdev, state);
+ flush_work(&led_cdev->set_brightness_work);
ret = size;
unlock:
diff --git a/drivers/leds/led-core.c b/drivers/leds/led-core.c
index e3da7c03da1b..e9ae7f87ab90 100644
--- a/drivers/leds/led-core.c
+++ b/drivers/leds/led-core.c
@@ -164,6 +164,11 @@ static void led_blink_setup(struct led_classdev *led_cdev,
unsigned long *delay_on,
unsigned long *delay_off)
{
+ /*
+ * If "set brightness to 0" is pending in workqueue, we don't
+ * want that to be reordered after blink_set()
+ */
+ flush_work(&led_cdev->set_brightness_work);
if (!test_bit(LED_BLINK_ONESHOT, &led_cdev->work_flags) &&
led_cdev->blink_set &&
!led_cdev->blink_set(led_cdev, delay_on, delay_off))
diff --git a/drivers/leds/leds-as3645a.c b/drivers/leds/leds-as3645a.c
index 98a69b1a43f9..b0df514992e1 100644
--- a/drivers/leds/leds-as3645a.c
+++ b/drivers/leds/leds-as3645a.c
@@ -25,7 +25,7 @@
#include <linux/leds.h>
#include <linux/module.h>
#include <linux/mutex.h>
-#include <linux/of.h>
+#include <linux/property.h>
#include <linux/slab.h>
#include <media/v4l2-flash-led-class.h>
@@ -148,8 +148,8 @@ struct as3645a {
struct v4l2_flash *vf;
struct v4l2_flash *vfind;
- struct device_node *flash_node;
- struct device_node *indicator_node;
+ struct fwnode_handle *flash_node;
+ struct fwnode_handle *indicator_node;
struct as3645a_config cfg;
@@ -493,30 +493,31 @@ static int as3645a_detect(struct as3645a *flash)
static int as3645a_parse_node(struct as3645a *flash,
struct as3645a_names *names,
- struct device_node *node)
+ struct fwnode_handle *fwnode)
{
struct as3645a_config *cfg = &flash->cfg;
- struct device_node *child;
+ struct fwnode_handle *child;
const char *name;
int rval;
- for_each_child_of_node(node, child) {
+ fwnode_for_each_child_node(fwnode, child) {
u32 id = 0;
- of_property_read_u32(child, "reg", &id);
+ fwnode_property_read_u32(child, "reg", &id);
switch (id) {
case AS_LED_FLASH:
- flash->flash_node = of_node_get(child);
+ flash->flash_node = child;
break;
case AS_LED_INDICATOR:
- flash->indicator_node = of_node_get(child);
+ flash->indicator_node = child;
break;
default:
dev_warn(&flash->client->dev,
"unknown LED %u encountered, ignoring\n", id);
break;
}
+ fwnode_handle_get(child);
}
if (!flash->flash_node) {
@@ -524,42 +525,46 @@ static int as3645a_parse_node(struct as3645a *flash,
return -ENODEV;
}
- rval = of_property_read_string(flash->flash_node, "label", &name);
- if (!rval)
+ rval = fwnode_property_read_string(flash->flash_node, "label", &name);
+ if (!rval) {
strlcpy(names->flash, name, sizeof(names->flash));
- else
+ } else if (is_of_node(fwnode)) {
snprintf(names->flash, sizeof(names->flash),
- "%pOFn:flash", node);
+ "%pOFn:flash", to_of_node(fwnode));
+ } else {
+ dev_err(&flash->client->dev, "flash node has no label!\n");
+ return -EINVAL;
+ }
- rval = of_property_read_u32(flash->flash_node, "flash-timeout-us",
- &cfg->flash_timeout_us);
+ rval = fwnode_property_read_u32(flash->flash_node, "flash-timeout-us",
+ &cfg->flash_timeout_us);
if (rval < 0) {
dev_err(&flash->client->dev,
"can't read flash-timeout-us property for flash\n");
goto out_err;
}
- rval = of_property_read_u32(flash->flash_node, "flash-max-microamp",
- &cfg->flash_max_ua);
+ rval = fwnode_property_read_u32(flash->flash_node, "flash-max-microamp",
+ &cfg->flash_max_ua);
if (rval < 0) {
dev_err(&flash->client->dev,
"can't read flash-max-microamp property for flash\n");
goto out_err;
}
- rval = of_property_read_u32(flash->flash_node, "led-max-microamp",
- &cfg->assist_max_ua);
+ rval = fwnode_property_read_u32(flash->flash_node, "led-max-microamp",
+ &cfg->assist_max_ua);
if (rval < 0) {
dev_err(&flash->client->dev,
"can't read led-max-microamp property for flash\n");
goto out_err;
}
- of_property_read_u32(flash->flash_node, "voltage-reference",
- &cfg->voltage_reference);
+ fwnode_property_read_u32(flash->flash_node, "voltage-reference",
+ &cfg->voltage_reference);
- of_property_read_u32(flash->flash_node, "ams,input-max-microamp",
- &cfg->peak);
+ fwnode_property_read_u32(flash->flash_node, "ams,input-max-microamp",
+ &cfg->peak);
cfg->peak = AS_PEAK_mA_TO_REG(cfg->peak);
if (!flash->indicator_node) {
@@ -568,15 +573,21 @@ static int as3645a_parse_node(struct as3645a *flash,
goto out_err;
}
- rval = of_property_read_string(flash->indicator_node, "label", &name);
- if (!rval)
+ rval = fwnode_property_read_string(flash->indicator_node, "label",
+ &name);
+ if (!rval) {
strlcpy(names->indicator, name, sizeof(names->indicator));
- else
+ } else if (is_of_node(fwnode)) {
snprintf(names->indicator, sizeof(names->indicator),
- "%pOFn:indicator", node);
+ "%pOFn:indicator", to_of_node(fwnode));
+ } else {
+ dev_err(&flash->client->dev, "indicator node has no label!\n");
+ return -EINVAL;
+ }
- rval = of_property_read_u32(flash->indicator_node, "led-max-microamp",
- &cfg->indicator_max_ua);
+ rval = fwnode_property_read_u32(flash->indicator_node,
+ "led-max-microamp",
+ &cfg->indicator_max_ua);
if (rval < 0) {
dev_err(&flash->client->dev,
"can't read led-max-microamp property for indicator\n");
@@ -586,8 +597,8 @@ static int as3645a_parse_node(struct as3645a *flash,
return 0;
out_err:
- of_node_put(flash->flash_node);
- of_node_put(flash->indicator_node);
+ fwnode_handle_put(flash->flash_node);
+ fwnode_handle_put(flash->indicator_node);
return rval;
}
@@ -668,14 +679,14 @@ static int as3645a_v4l2_setup(struct as3645a *flash)
strlcpy(cfgind.dev_name, flash->iled_cdev.name, sizeof(cfg.dev_name));
flash->vf = v4l2_flash_init(
- &flash->client->dev, of_fwnode_handle(flash->flash_node),
- &flash->fled, NULL, &cfg);
+ &flash->client->dev, flash->flash_node, &flash->fled, NULL,
+ &cfg);
if (IS_ERR(flash->vf))
return PTR_ERR(flash->vf);
flash->vfind = v4l2_flash_indicator_init(
- &flash->client->dev, of_fwnode_handle(flash->indicator_node),
- &flash->iled_cdev, &cfgind);
+ &flash->client->dev, flash->indicator_node, &flash->iled_cdev,
+ &cfgind);
if (IS_ERR(flash->vfind)) {
v4l2_flash_release(flash->vf);
return PTR_ERR(flash->vfind);
@@ -690,7 +701,7 @@ static int as3645a_probe(struct i2c_client *client)
struct as3645a *flash;
int rval;
- if (client->dev.of_node == NULL)
+ if (!dev_fwnode(&client->dev))
return -ENODEV;
flash = devm_kzalloc(&client->dev, sizeof(*flash), GFP_KERNEL);
@@ -699,7 +710,7 @@ static int as3645a_probe(struct i2c_client *client)
flash->client = client;
- rval = as3645a_parse_node(flash, &names, client->dev.of_node);
+ rval = as3645a_parse_node(flash, &names, dev_fwnode(&client->dev));
if (rval < 0)
return rval;
@@ -731,8 +742,8 @@ out_mutex_destroy:
mutex_destroy(&flash->mutex);
out_put_nodes:
- of_node_put(flash->flash_node);
- of_node_put(flash->indicator_node);
+ fwnode_handle_put(flash->flash_node);
+ fwnode_handle_put(flash->indicator_node);
return rval;
}
@@ -751,8 +762,8 @@ static int as3645a_remove(struct i2c_client *client)
mutex_destroy(&flash->mutex);
- of_node_put(flash->flash_node);
- of_node_put(flash->indicator_node);
+ fwnode_handle_put(flash->flash_node);
+ fwnode_handle_put(flash->indicator_node);
return 0;
}
diff --git a/drivers/leds/leds-blinkm.c b/drivers/leds/leds-blinkm.c
index 851c1920b63c..11b771fb933b 100644
--- a/drivers/leds/leds-blinkm.c
+++ b/drivers/leds/leds-blinkm.c
@@ -594,7 +594,6 @@ static int blinkm_probe(struct i2c_client *client,
goto exit;
}
- data->i2c_addr = 0x09;
data->i2c_addr = 0x08;
/* i2c addr - use fake addr of 0x08 initially (real is 0x09) */
data->fw_ver = 0xfe;
diff --git a/drivers/leds/leds-lm3532.c b/drivers/leds/leds-lm3532.c
new file mode 100644
index 000000000000..180895b83b88
--- /dev/null
+++ b/drivers/leds/leds-lm3532.c
@@ -0,0 +1,683 @@
+// SPDX-License-Identifier: GPL-2.0
+// TI LM3532 LED driver
+// Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/
+
+#include <linux/i2c.h>
+#include <linux/leds.h>
+#include <linux/slab.h>
+#include <linux/regmap.h>
+#include <linux/types.h>
+#include <linux/regulator/consumer.h>
+#include <linux/module.h>
+#include <uapi/linux/uleds.h>
+#include <linux/gpio/consumer.h>
+
+#define LM3532_NAME "lm3532-led"
+#define LM3532_BL_MODE_MANUAL 0x00
+#define LM3532_BL_MODE_ALS 0x01
+
+#define LM3532_REG_OUTPUT_CFG 0x10
+#define LM3532_REG_STARTSHUT_RAMP 0x11
+#define LM3532_REG_RT_RAMP 0x12
+#define LM3532_REG_PWM_A_CFG 0x13
+#define LM3532_REG_PWM_B_CFG 0x14
+#define LM3532_REG_PWM_C_CFG 0x15
+#define LM3532_REG_ZONE_CFG_A 0x16
+#define LM3532_REG_CTRL_A_BRT 0x17
+#define LM3532_REG_ZONE_CFG_B 0x18
+#define LM3532_REG_CTRL_B_BRT 0x19
+#define LM3532_REG_ZONE_CFG_C 0x1a
+#define LM3532_REG_CTRL_C_BRT 0x1b
+#define LM3532_REG_ENABLE 0x1d
+#define LM3532_ALS_CONFIG 0x23
+#define LM3532_REG_ZN_0_HI 0x60
+#define LM3532_REG_ZN_0_LO 0x61
+#define LM3532_REG_ZN_1_HI 0x62
+#define LM3532_REG_ZN_1_LO 0x63
+#define LM3532_REG_ZN_2_HI 0x64
+#define LM3532_REG_ZN_2_LO 0x65
+#define LM3532_REG_ZN_3_HI 0x66
+#define LM3532_REG_ZN_3_LO 0x67
+#define LM3532_REG_MAX 0x7e
+
+/* Contorl Enable */
+#define LM3532_CTRL_A_ENABLE BIT(0)
+#define LM3532_CTRL_B_ENABLE BIT(1)
+#define LM3532_CTRL_C_ENABLE BIT(2)
+
+/* PWM Zone Control */
+#define LM3532_PWM_ZONE_MASK 0x7c
+#define LM3532_PWM_ZONE_0_EN BIT(2)
+#define LM3532_PWM_ZONE_1_EN BIT(3)
+#define LM3532_PWM_ZONE_2_EN BIT(4)
+#define LM3532_PWM_ZONE_3_EN BIT(5)
+#define LM3532_PWM_ZONE_4_EN BIT(6)
+
+/* Brightness Configuration */
+#define LM3532_I2C_CTRL BIT(0)
+#define LM3532_ALS_CTRL 0
+#define LM3532_LINEAR_MAP BIT(1)
+#define LM3532_ZONE_MASK (BIT(2) | BIT(3) | BIT(4))
+#define LM3532_ZONE_0 0
+#define LM3532_ZONE_1 BIT(2)
+#define LM3532_ZONE_2 BIT(3)
+#define LM3532_ZONE_3 (BIT(2) | BIT(3))
+#define LM3532_ZONE_4 BIT(4)
+
+#define LM3532_ENABLE_ALS BIT(3)
+#define LM3532_ALS_SEL_SHIFT 6
+
+/* Zone Boundary Register */
+#define LM3532_ALS_WINDOW_mV 2000
+#define LM3532_ALS_ZB_MAX 4
+#define LM3532_ALS_OFFSET_mV 2
+
+#define LM3532_CONTROL_A 0
+#define LM3532_CONTROL_B 1
+#define LM3532_CONTROL_C 2
+#define LM3532_MAX_CONTROL_BANKS 3
+#define LM3532_MAX_LED_STRINGS 3
+
+#define LM3532_OUTPUT_CFG_MASK 0x3
+#define LM3532_BRT_VAL_ADJUST 8
+#define LM3532_RAMP_DOWN_SHIFT 3
+
+#define LM3532_NUM_RAMP_VALS 8
+#define LM3532_NUM_AVG_VALS 8
+#define LM3532_NUM_IMP_VALS 32
+
+/*
+ * struct lm3532_als_data
+ * @config - value of ALS configuration register
+ * @als1_imp_sel - value of ALS1 resistor select register
+ * @als2_imp_sel - value of ALS2 resistor select register
+ * @als_avrg_time - ALS averaging time
+ * @als_input_mode - ALS input mode for brightness control
+ * @als_vmin - Minimum ALS voltage
+ * @als_vmax - Maximum ALS voltage
+ * @zone_lo - values of ALS lo ZB(Zone Boundary) registers
+ * @zone_hi - values of ALS hi ZB(Zone Boundary) registers
+ */
+struct lm3532_als_data {
+ u8 config;
+ u8 als1_imp_sel;
+ u8 als2_imp_sel;
+ u8 als_avrg_time;
+ u8 als_input_mode;
+ u32 als_vmin;
+ u32 als_vmax;
+ u8 zones_lo[LM3532_ALS_ZB_MAX];
+ u8 zones_hi[LM3532_ALS_ZB_MAX];
+};
+
+/**
+ * struct lm3532_led
+ * @led_dev: led class device
+ * @priv - Pointer the device data structure
+ * @control_bank - Control bank the LED is associated to
+ * @mode - Mode of the LED string
+ * @num_leds - Number of LED strings are supported in this array
+ * @led_strings - The LED strings supported in this array
+ * @label - LED label
+ */
+struct lm3532_led {
+ struct led_classdev led_dev;
+ struct lm3532_data *priv;
+
+ int control_bank;
+ int mode;
+ int num_leds;
+ u32 led_strings[LM3532_MAX_CONTROL_BANKS];
+ char label[LED_MAX_NAME_SIZE];
+};
+
+/**
+ * struct lm3532_data
+ * @enable_gpio - Hardware enable gpio
+ * @regulator: regulator
+ * @client: i2c client
+ * @regmap - Devices register map
+ * @dev - Pointer to the devices device struct
+ * @lock - Lock for reading/writing the device
+ * @als_data - Pointer to the als data struct
+ * @runtime_ramp_up - Runtime ramp up setting
+ * @runtime_ramp_down - Runtime ramp down setting
+ * @leds - Array of LED strings
+ */
+struct lm3532_data {
+ struct gpio_desc *enable_gpio;
+ struct regulator *regulator;
+ struct i2c_client *client;
+ struct regmap *regmap;
+ struct device *dev;
+ struct mutex lock;
+
+ struct lm3532_als_data *als_data;
+
+ u32 runtime_ramp_up;
+ u32 runtime_ramp_down;
+
+ struct lm3532_led leds[];
+};
+
+static const struct reg_default lm3532_reg_defs[] = {
+ {LM3532_REG_OUTPUT_CFG, 0xe4},
+ {LM3532_REG_STARTSHUT_RAMP, 0xc0},
+ {LM3532_REG_RT_RAMP, 0xc0},
+ {LM3532_REG_PWM_A_CFG, 0x82},
+ {LM3532_REG_PWM_B_CFG, 0x82},
+ {LM3532_REG_PWM_C_CFG, 0x82},
+ {LM3532_REG_ZONE_CFG_A, 0xf1},
+ {LM3532_REG_CTRL_A_BRT, 0xf3},
+ {LM3532_REG_ZONE_CFG_B, 0xf1},
+ {LM3532_REG_CTRL_B_BRT, 0xf3},
+ {LM3532_REG_ZONE_CFG_C, 0xf1},
+ {LM3532_REG_CTRL_C_BRT, 0xf3},
+ {LM3532_REG_ENABLE, 0xf8},
+ {LM3532_ALS_CONFIG, 0x44},
+ {LM3532_REG_ZN_0_HI, 0x35},
+ {LM3532_REG_ZN_0_LO, 0x33},
+ {LM3532_REG_ZN_1_HI, 0x6a},
+ {LM3532_REG_ZN_1_LO, 0x66},
+ {LM3532_REG_ZN_2_HI, 0xa1},
+ {LM3532_REG_ZN_2_LO, 0x99},
+ {LM3532_REG_ZN_3_HI, 0xdc},
+ {LM3532_REG_ZN_3_LO, 0xcc},
+};
+
+static const struct regmap_config lm3532_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+
+ .max_register = LM3532_REG_MAX,
+ .reg_defaults = lm3532_reg_defs,
+ .num_reg_defaults = ARRAY_SIZE(lm3532_reg_defs),
+ .cache_type = REGCACHE_FLAT,
+};
+
+const static int als_imp_table[LM3532_NUM_IMP_VALS] = {37000, 18500, 12330,
+ 92500, 7400, 6170, 5290,
+ 4630, 4110, 3700, 3360,
+ 3080, 2850, 2640, 2440,
+ 2310, 2180, 2060, 1950,
+ 1850, 1760, 1680, 1610,
+ 1540, 1480, 1420, 1370,
+ 1320, 1280, 1230, 1190};
+static int lm3532_get_als_imp_index(int als_imped)
+{
+ int i;
+
+ if (als_imped > als_imp_table[1])
+ return 0;
+
+ if (als_imped < als_imp_table[LM3532_NUM_IMP_VALS - 1])
+ return LM3532_NUM_IMP_VALS - 1;
+
+ for (i = 1; i < LM3532_NUM_IMP_VALS; i++) {
+ if (als_imped == als_imp_table[i])
+ return i;
+
+ /* Find an approximate index by looking up the table */
+ if (als_imped < als_imp_table[i - 1] &&
+ als_imped > als_imp_table[i]) {
+ if (als_imped - als_imp_table[i - 1] <
+ als_imp_table[i] - als_imped)
+ return i + 1;
+ else
+ return i;
+ }
+ }
+
+ return -EINVAL;
+}
+
+static int lm3532_get_index(const int table[], int size, int value)
+{
+ int i;
+
+ for (i = 1; i < size; i++) {
+ if (value == table[i])
+ return i;
+
+ /* Find an approximate index by looking up the table */
+ if (value > table[i - 1] &&
+ value < table[i]) {
+ if (value - table[i - 1] < table[i] - value)
+ return i - 1;
+ else
+ return i;
+ }
+ }
+
+ return -EINVAL;
+}
+
+const static int als_avrg_table[LM3532_NUM_AVG_VALS] = {17920, 35840, 71680,
+ 1433360, 286720, 573440,
+ 1146880, 2293760};
+static int lm3532_get_als_avg_index(int avg_time)
+{
+ if (avg_time <= als_avrg_table[0])
+ return 0;
+
+ if (avg_time > als_avrg_table[LM3532_NUM_AVG_VALS - 1])
+ return LM3532_NUM_AVG_VALS - 1;
+
+ return lm3532_get_index(&als_avrg_table[0], LM3532_NUM_AVG_VALS,
+ avg_time);
+}
+
+const static int ramp_table[LM3532_NUM_RAMP_VALS] = { 8, 1024, 2048, 4096, 8192,
+ 16384, 32768, 65536};
+static int lm3532_get_ramp_index(int ramp_time)
+{
+ if (ramp_time <= ramp_table[0])
+ return 0;
+
+ if (ramp_time > ramp_table[LM3532_NUM_RAMP_VALS - 1])
+ return LM3532_NUM_RAMP_VALS - 1;
+
+ return lm3532_get_index(&ramp_table[0], LM3532_NUM_RAMP_VALS,
+ ramp_time);
+}
+
+static int lm3532_led_enable(struct lm3532_led *led_data)
+{
+ int ctrl_en_val = BIT(led_data->control_bank);
+ int ret;
+
+ ret = regmap_update_bits(led_data->priv->regmap, LM3532_REG_ENABLE,
+ ctrl_en_val, ctrl_en_val);
+ if (ret) {
+ dev_err(led_data->priv->dev, "Failed to set ctrl:%d\n", ret);
+ return ret;
+ }
+
+ return regulator_enable(led_data->priv->regulator);
+}
+
+static int lm3532_led_disable(struct lm3532_led *led_data)
+{
+ int ctrl_en_val = BIT(led_data->control_bank);
+ int ret;
+
+ ret = regmap_update_bits(led_data->priv->regmap, LM3532_REG_ENABLE,
+ ctrl_en_val, ~ctrl_en_val);
+ if (ret) {
+ dev_err(led_data->priv->dev, "Failed to set ctrl:%d\n", ret);
+ return ret;
+ }
+
+ return regulator_disable(led_data->priv->regulator);
+}
+
+static int lm3532_brightness_set(struct led_classdev *led_cdev,
+ enum led_brightness brt_val)
+{
+ struct lm3532_led *led =
+ container_of(led_cdev, struct lm3532_led, led_dev);
+ u8 brightness_reg;
+ int ret;
+
+ mutex_lock(&led->priv->lock);
+
+ if (led->mode == LM3532_BL_MODE_ALS) {
+ if (brt_val > LED_OFF)
+ ret = lm3532_led_enable(led);
+ else
+ ret = lm3532_led_disable(led);
+
+ goto unlock;
+ }
+
+ if (brt_val == LED_OFF) {
+ ret = lm3532_led_disable(led);
+ goto unlock;
+ }
+
+ ret = lm3532_led_enable(led);
+ if (ret)
+ goto unlock;
+
+ brightness_reg = LM3532_REG_CTRL_A_BRT + led->control_bank * 2;
+ brt_val = brt_val / LM3532_BRT_VAL_ADJUST;
+
+ ret = regmap_write(led->priv->regmap, brightness_reg, brt_val);
+
+unlock:
+ mutex_unlock(&led->priv->lock);
+ return ret;
+}
+
+static int lm3532_init_registers(struct lm3532_led *led)
+{
+ struct lm3532_data *drvdata = led->priv;
+ unsigned int runtime_ramp_val;
+ unsigned int output_cfg_val = 0;
+ unsigned int output_cfg_shift = 0;
+ unsigned int output_cfg_mask = 0;
+ int ret, i;
+
+ for (i = 0; i < led->num_leds; i++) {
+ output_cfg_shift = led->led_strings[i] * 2;
+ output_cfg_val |= (led->control_bank << output_cfg_shift);
+ output_cfg_mask |= LM3532_OUTPUT_CFG_MASK << output_cfg_shift;
+ }
+
+ ret = regmap_update_bits(drvdata->regmap, LM3532_REG_OUTPUT_CFG,
+ output_cfg_mask, output_cfg_val);
+ if (ret)
+ return ret;
+
+ runtime_ramp_val = drvdata->runtime_ramp_up |
+ (drvdata->runtime_ramp_down << LM3532_RAMP_DOWN_SHIFT);
+
+ return regmap_write(drvdata->regmap, LM3532_REG_RT_RAMP,
+ runtime_ramp_val);
+}
+
+static int lm3532_als_configure(struct lm3532_data *priv,
+ struct lm3532_led *led)
+{
+ struct lm3532_als_data *als = priv->als_data;
+ u32 als_vmin, als_vmax, als_vstep;
+ int zone_reg = LM3532_REG_ZN_0_HI;
+ int brightnes_config_reg;
+ int ret;
+ int i;
+
+ als_vmin = als->als_vmin;
+ als_vmax = als->als_vmax;
+
+ als_vstep = (als_vmax - als_vmin) / ((LM3532_ALS_ZB_MAX + 1) * 2);
+
+ for (i = 0; i < LM3532_ALS_ZB_MAX; i++) {
+ als->zones_lo[i] = ((als_vmin + als_vstep + (i * als_vstep)) *
+ LED_FULL) / 1000;
+ als->zones_hi[i] = ((als_vmin + LM3532_ALS_OFFSET_mV +
+ als_vstep + (i * als_vstep)) * LED_FULL) / 1000;
+
+ zone_reg = LM3532_REG_ZN_0_HI + i * 2;
+ ret = regmap_write(priv->regmap, zone_reg, als->zones_lo[i]);
+ if (ret)
+ return ret;
+
+ zone_reg += 1;
+ ret = regmap_write(priv->regmap, zone_reg, als->zones_hi[i]);
+ if (ret)
+ return ret;
+ }
+
+ als->config = (als->als_avrg_time | (LM3532_ENABLE_ALS) |
+ (als->als_input_mode << LM3532_ALS_SEL_SHIFT));
+
+ ret = regmap_write(priv->regmap, LM3532_ALS_CONFIG, als->config);
+ if (ret)
+ return ret;
+
+ brightnes_config_reg = LM3532_REG_ZONE_CFG_A + led->control_bank * 2;
+
+ return regmap_update_bits(priv->regmap, brightnes_config_reg,
+ LM3532_I2C_CTRL, LM3532_ALS_CTRL);
+}
+
+static int lm3532_parse_als(struct lm3532_data *priv)
+{
+ struct lm3532_als_data *als;
+ int als_avg_time;
+ int als_impedance;
+ int ret;
+
+ als = devm_kzalloc(priv->dev, sizeof(*als), GFP_KERNEL);
+ if (als == NULL)
+ return -ENOMEM;
+
+ ret = device_property_read_u32(&priv->client->dev, "ti,als-vmin",
+ &als->als_vmin);
+ if (ret)
+ als->als_vmin = 0;
+
+ ret = device_property_read_u32(&priv->client->dev, "ti,als-vmax",
+ &als->als_vmax);
+ if (ret)
+ als->als_vmax = LM3532_ALS_WINDOW_mV;
+
+ if (als->als_vmax > LM3532_ALS_WINDOW_mV) {
+ ret = -EINVAL;
+ return ret;
+ }
+
+ ret = device_property_read_u32(&priv->client->dev, "ti,als1-imp-sel",
+ &als_impedance);
+ if (ret)
+ als->als1_imp_sel = 0;
+ else
+ als->als1_imp_sel = lm3532_get_als_imp_index(als_impedance);
+
+ ret = device_property_read_u32(&priv->client->dev, "ti,als2-imp-sel",
+ &als_impedance);
+ if (ret)
+ als->als2_imp_sel = 0;
+ else
+ als->als2_imp_sel = lm3532_get_als_imp_index(als_impedance);
+
+ ret = device_property_read_u32(&priv->client->dev, "ti,als-avrg-time-us",
+ &als_avg_time);
+ if (ret)
+ als->als_avrg_time = 0;
+ else
+ als->als_avrg_time = lm3532_get_als_avg_index(als_avg_time);
+
+ ret = device_property_read_u8(&priv->client->dev, "ti,als-input-mode",
+ &als->als_input_mode);
+ if (ret)
+ als->als_input_mode = 0;
+
+ if (als->als_input_mode > LM3532_BL_MODE_ALS) {
+ ret = -EINVAL;
+ return ret;
+ }
+
+ priv->als_data = als;
+
+ return ret;
+}
+
+static int lm3532_parse_node(struct lm3532_data *priv)
+{
+ struct fwnode_handle *child = NULL;
+ struct lm3532_led *led;
+ const char *name;
+ int control_bank;
+ u32 ramp_time;
+ size_t i = 0;
+ int ret;
+
+ priv->enable_gpio = devm_gpiod_get_optional(&priv->client->dev,
+ "enable", GPIOD_OUT_LOW);
+ if (IS_ERR(priv->enable_gpio))
+ priv->enable_gpio = NULL;
+
+ priv->regulator = devm_regulator_get(&priv->client->dev, "vin");
+ if (IS_ERR(priv->regulator))
+ priv->regulator = NULL;
+
+ ret = device_property_read_u32(&priv->client->dev, "ramp-up-us",
+ &ramp_time);
+ if (ret)
+ dev_info(&priv->client->dev, "ramp-up-ms property missing\n");
+ else
+ priv->runtime_ramp_up = lm3532_get_ramp_index(ramp_time);
+
+ ret = device_property_read_u32(&priv->client->dev, "ramp-down-us",
+ &ramp_time);
+ if (ret)
+ dev_info(&priv->client->dev, "ramp-down-ms property missing\n");
+ else
+ priv->runtime_ramp_down = lm3532_get_ramp_index(ramp_time);
+
+ device_for_each_child_node(priv->dev, child) {
+ led = &priv->leds[i];
+
+ ret = fwnode_property_read_u32(child, "reg", &control_bank);
+ if (ret) {
+ dev_err(&priv->client->dev, "reg property missing\n");
+ fwnode_handle_put(child);
+ goto child_out;
+ }
+
+ if (control_bank > LM3532_CONTROL_C) {
+ dev_err(&priv->client->dev, "Control bank invalid\n");
+ continue;
+ }
+
+ led->control_bank = control_bank;
+
+ ret = fwnode_property_read_u32(child, "ti,led-mode",
+ &led->mode);
+ if (ret) {
+ dev_err(&priv->client->dev, "ti,led-mode property missing\n");
+ fwnode_handle_put(child);
+ goto child_out;
+ }
+
+ if (led->mode == LM3532_BL_MODE_ALS) {
+ ret = lm3532_parse_als(priv);
+ if (ret)
+ dev_err(&priv->client->dev, "Failed to parse als\n");
+ else
+ lm3532_als_configure(priv, led);
+ }
+
+ led->num_leds = fwnode_property_read_u32_array(child,
+ "led-sources",
+ NULL, 0);
+
+ if (led->num_leds > LM3532_MAX_LED_STRINGS) {
+ dev_err(&priv->client->dev, "To many LED string defined\n");
+ continue;
+ }
+
+ ret = fwnode_property_read_u32_array(child, "led-sources",
+ led->led_strings,
+ led->num_leds);
+ if (ret) {
+ dev_err(&priv->client->dev, "led-sources property missing\n");
+ fwnode_handle_put(child);
+ goto child_out;
+ }
+
+ fwnode_property_read_string(child, "linux,default-trigger",
+ &led->led_dev.default_trigger);
+
+ ret = fwnode_property_read_string(child, "label", &name);
+ if (ret)
+ snprintf(led->label, sizeof(led->label),
+ "%s::", priv->client->name);
+ else
+ snprintf(led->label, sizeof(led->label),
+ "%s:%s", priv->client->name, name);
+
+ led->priv = priv;
+ led->led_dev.name = led->label;
+ led->led_dev.brightness_set_blocking = lm3532_brightness_set;
+
+ ret = devm_led_classdev_register(priv->dev, &led->led_dev);
+ if (ret) {
+ dev_err(&priv->client->dev, "led register err: %d\n",
+ ret);
+ fwnode_handle_put(child);
+ goto child_out;
+ }
+
+ lm3532_init_registers(led);
+
+ i++;
+ }
+
+child_out:
+ return ret;
+}
+
+static int lm3532_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct lm3532_data *drvdata;
+ int ret = 0;
+ int count;
+
+ count = device_get_child_node_count(&client->dev);
+ if (!count) {
+ dev_err(&client->dev, "LEDs are not defined in device tree!");
+ return -ENODEV;
+ }
+
+ drvdata = devm_kzalloc(&client->dev, struct_size(drvdata, leds, count),
+ GFP_KERNEL);
+ if (drvdata == NULL)
+ return -ENOMEM;
+
+ drvdata->client = client;
+ drvdata->dev = &client->dev;
+
+ drvdata->regmap = devm_regmap_init_i2c(client, &lm3532_regmap_config);
+ if (IS_ERR(drvdata->regmap)) {
+ ret = PTR_ERR(drvdata->regmap);
+ dev_err(&client->dev, "Failed to allocate register map: %d\n",
+ ret);
+ return ret;
+ }
+
+ mutex_init(&drvdata->lock);
+ i2c_set_clientdata(client, drvdata);
+
+ ret = lm3532_parse_node(drvdata);
+ if (ret) {
+ dev_err(&client->dev, "Failed to parse node\n");
+ return ret;
+ }
+
+ if (drvdata->enable_gpio)
+ gpiod_direction_output(drvdata->enable_gpio, 1);
+
+ return ret;
+}
+
+static int lm3532_remove(struct i2c_client *client)
+{
+ struct lm3532_data *drvdata = i2c_get_clientdata(client);
+
+ mutex_destroy(&drvdata->lock);
+
+ if (drvdata->enable_gpio)
+ gpiod_direction_output(drvdata->enable_gpio, 0);
+
+ return 0;
+}
+
+static const struct of_device_id of_lm3532_leds_match[] = {
+ { .compatible = "ti,lm3532", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, of_lm3532_leds_match);
+
+static const struct i2c_device_id lm3532_id[] = {
+ {LM3532_NAME, 0},
+ {}
+};
+MODULE_DEVICE_TABLE(i2c, lm3532_id);
+
+static struct i2c_driver lm3532_i2c_driver = {
+ .probe = lm3532_probe,
+ .remove = lm3532_remove,
+ .id_table = lm3532_id,
+ .driver = {
+ .name = LM3532_NAME,
+ .of_match_table = of_lm3532_leds_match,
+ },
+};
+module_i2c_driver(lm3532_i2c_driver);
+
+MODULE_DESCRIPTION("Back Light driver for LM3532");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com>");
diff --git a/drivers/leds/leds-lt3593.c b/drivers/leds/leds-lt3593.c
index de3623e0d094..83e8e58d81cb 100644
--- a/drivers/leds/leds-lt3593.c
+++ b/drivers/leds/leds-lt3593.c
@@ -60,67 +60,14 @@ static int lt3593_led_set(struct led_classdev *led_cdev,
return 0;
}
-static struct lt3593_led_data *lt3593_led_probe_pdata(struct device *dev)
-{
- struct gpio_led_platform_data *pdata = dev_get_platdata(dev);
- const struct gpio_led *template = &pdata->leds[0];
- struct lt3593_led_data *led_data;
- int ret, state;
-
- if (pdata->num_leds != 1)
- return ERR_PTR(-EINVAL);
-
- led_data = devm_kzalloc(dev, sizeof(*led_data), GFP_KERNEL);
- if (!led_data)
- return ERR_PTR(-ENOMEM);
-
- led_data->cdev.name = template->name;
- led_data->cdev.default_trigger = template->default_trigger;
- led_data->cdev.brightness_set_blocking = lt3593_led_set;
-
- state = (template->default_state == LEDS_GPIO_DEFSTATE_ON);
- led_data->cdev.brightness = state ? LED_FULL : LED_OFF;
-
- if (!template->retain_state_suspended)
- led_data->cdev.flags |= LED_CORE_SUSPENDRESUME;
-
- ret = devm_gpio_request_one(dev, template->gpio, state ?
- GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW,
- template->name);
- if (ret < 0)
- return ERR_PTR(ret);
-
- led_data->gpiod = gpio_to_desc(template->gpio);
- if (!led_data->gpiod)
- return ERR_PTR(-EPROBE_DEFER);
-
- ret = devm_led_classdev_register(dev, &led_data->cdev);
- if (ret < 0)
- return ERR_PTR(ret);
-
- dev_info(dev, "registered LT3593 LED '%s' at GPIO %d\n",
- template->name, template->gpio);
-
- return led_data;
-}
-
static int lt3593_led_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct lt3593_led_data *led_data;
struct fwnode_handle *child;
int ret, state = LEDS_GPIO_DEFSTATE_OFF;
- enum gpiod_flags flags = GPIOD_OUT_LOW;
const char *tmp;
- if (dev_get_platdata(dev)) {
- led_data = lt3593_led_probe_pdata(dev);
- if (IS_ERR(led_data))
- return PTR_ERR(led_data);
-
- goto out;
- }
-
if (!dev->of_node)
return -ENODEV;
@@ -151,13 +98,8 @@ static int lt3593_led_probe(struct platform_device *pdev)
&led_data->cdev.default_trigger);
if (!fwnode_property_read_string(child, "default-state", &tmp)) {
- if (!strcmp(tmp, "keep")) {
- state = LEDS_GPIO_DEFSTATE_KEEP;
- flags = GPIOD_ASIS;
- } else if (!strcmp(tmp, "on")) {
+ if (!strcmp(tmp, "on"))
state = LEDS_GPIO_DEFSTATE_ON;
- flags = GPIOD_OUT_HIGH;
- }
}
led_data->cdev.name = led_data->name;
@@ -171,20 +113,16 @@ static int lt3593_led_probe(struct platform_device *pdev)
}
led_data->cdev.dev->of_node = dev->of_node;
-
-out:
platform_set_drvdata(pdev, led_data);
return 0;
}
-#ifdef CONFIG_OF
static const struct of_device_id of_lt3593_leds_match[] = {
{ .compatible = "lltc,lt3593", },
{},
};
MODULE_DEVICE_TABLE(of, of_lt3593_leds_match);
-#endif
static struct platform_driver lt3593_led_driver = {
.probe = lt3593_led_probe,
diff --git a/drivers/leds/leds-pca955x.c b/drivers/leds/leds-pca955x.c
index f51b356d4426..a9f5dad55956 100644
--- a/drivers/leds/leds-pca955x.c
+++ b/drivers/leds/leds-pca955x.c
@@ -40,7 +40,6 @@
* bits the chip supports.
*/
-#include <linux/acpi.h>
#include <linux/ctype.h>
#include <linux/delay.h>
#include <linux/err.h>
@@ -48,8 +47,8 @@
#include <linux/i2c.h>
#include <linux/leds.h>
#include <linux/module.h>
-#include <linux/of_device.h>
#include <linux/of.h>
+#include <linux/property.h>
#include <linux/slab.h>
#include <linux/string.h>
@@ -110,15 +109,6 @@ static const struct i2c_device_id pca955x_id[] = {
};
MODULE_DEVICE_TABLE(i2c, pca955x_id);
-static const struct acpi_device_id pca955x_acpi_ids[] = {
- { "PCA9550", pca9550 },
- { "PCA9551", pca9551 },
- { "PCA9552", pca9552 },
- { "PCA9553", pca9553 },
- { }
-};
-MODULE_DEVICE_TABLE(acpi, pca955x_acpi_ids);
-
struct pca955x {
struct mutex lock;
struct pca955x_led *leds;
@@ -373,16 +363,14 @@ static int pca955x_gpio_direction_output(struct gpio_chip *gc,
}
#endif /* CONFIG_LEDS_PCA955X_GPIO */
-#if IS_ENABLED(CONFIG_OF)
static struct pca955x_platform_data *
-pca955x_pdata_of_init(struct i2c_client *client, struct pca955x_chipdef *chip)
+pca955x_get_pdata(struct i2c_client *client, struct pca955x_chipdef *chip)
{
- struct device_node *np = client->dev.of_node;
- struct device_node *child;
struct pca955x_platform_data *pdata;
+ struct fwnode_handle *child;
int count;
- count = of_get_child_count(np);
+ count = device_get_child_node_count(&client->dev);
if (!count || count > chip->bits)
return ERR_PTR(-ENODEV);
@@ -396,24 +384,25 @@ pca955x_pdata_of_init(struct i2c_client *client, struct pca955x_chipdef *chip)
if (!pdata->leds)
return ERR_PTR(-ENOMEM);
- for_each_child_of_node(np, child) {
+ device_for_each_child_node(&client->dev, child) {
const char *name;
u32 reg;
int res;
- res = of_property_read_u32(child, "reg", &reg);
+ res = fwnode_property_read_u32(child, "reg", &reg);
if ((res != 0) || (reg >= chip->bits))
continue;
- if (of_property_read_string(child, "label", &name))
- name = child->name;
+ res = fwnode_property_read_string(child, "label", &name);
+ if ((res != 0) && is_of_node(child))
+ name = to_of_node(child)->name;
snprintf(pdata->leds[reg].name, sizeof(pdata->leds[reg].name),
"%s", name);
pdata->leds[reg].type = PCA955X_TYPE_LED;
- of_property_read_u32(child, "type", &pdata->leds[reg].type);
- of_property_read_string(child, "linux,default-trigger",
+ fwnode_property_read_u32(child, "type", &pdata->leds[reg].type);
+ fwnode_property_read_string(child, "linux,default-trigger",
&pdata->leds[reg].default_trigger);
}
@@ -429,15 +418,7 @@ static const struct of_device_id of_pca955x_match[] = {
{ .compatible = "nxp,pca9553", .data = (void *)pca9553 },
{},
};
-
MODULE_DEVICE_TABLE(of, of_pca955x_match);
-#else
-static struct pca955x_platform_data *
-pca955x_pdata_of_init(struct i2c_client *client, struct pca955x_chipdef *chip)
-{
- return ERR_PTR(-ENODEV);
-}
-#endif
static int pca955x_probe(struct i2c_client *client,
const struct i2c_device_id *id)
@@ -450,20 +431,11 @@ static int pca955x_probe(struct i2c_client *client,
struct pca955x_platform_data *pdata;
int ngpios = 0;
- if (id) {
- chip = &pca955x_chipdefs[id->driver_data];
- } else {
- const struct acpi_device_id *acpi_id;
-
- acpi_id = acpi_match_device(pca955x_acpi_ids, &client->dev);
- if (!acpi_id)
- return -ENODEV;
- chip = &pca955x_chipdefs[acpi_id->driver_data];
- }
+ chip = &pca955x_chipdefs[id->driver_data];
adapter = to_i2c_adapter(client->dev.parent);
pdata = dev_get_platdata(&client->dev);
if (!pdata) {
- pdata = pca955x_pdata_of_init(client, chip);
+ pdata = pca955x_get_pdata(client, chip);
if (IS_ERR(pdata))
return PTR_ERR(pdata);
}
@@ -602,8 +574,7 @@ static int pca955x_probe(struct i2c_client *client,
static struct i2c_driver pca955x_driver = {
.driver = {
.name = "leds-pca955x",
- .acpi_match_table = ACPI_PTR(pca955x_acpi_ids),
- .of_match_table = of_match_ptr(of_pca955x_match),
+ .of_match_table = of_pca955x_match,
},
.probe = pca955x_probe,
.id_table = pca955x_id,
diff --git a/drivers/leds/leds-pca963x.c b/drivers/leds/leds-pca963x.c
index 5c0908113e38..9b4ef070d956 100644
--- a/drivers/leds/leds-pca963x.c
+++ b/drivers/leds/leds-pca963x.c
@@ -25,7 +25,6 @@
* or by adding the 'nxp,hw-blink' property to the DTS.
*/
-#include <linux/acpi.h>
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/string.h>
@@ -33,6 +32,7 @@
#include <linux/leds.h>
#include <linux/err.h>
#include <linux/i2c.h>
+#include <linux/property.h>
#include <linux/slab.h>
#include <linux/of.h>
#include <linux/platform_data/leds-pca963x.h>
@@ -97,15 +97,6 @@ static const struct i2c_device_id pca963x_id[] = {
};
MODULE_DEVICE_TABLE(i2c, pca963x_id);
-static const struct acpi_device_id pca963x_acpi_ids[] = {
- { "PCA9632", pca9633 },
- { "PCA9633", pca9633 },
- { "PCA9634", pca9634 },
- { "PCA9635", pca9635 },
- { }
-};
-MODULE_DEVICE_TABLE(acpi, pca963x_acpi_ids);
-
struct pca963x_led;
struct pca963x {
@@ -287,16 +278,15 @@ static int pca963x_blink_set(struct led_classdev *led_cdev,
return 0;
}
-#if IS_ENABLED(CONFIG_OF)
static struct pca963x_platform_data *
-pca963x_dt_init(struct i2c_client *client, struct pca963x_chipdef *chip)
+pca963x_get_pdata(struct i2c_client *client, struct pca963x_chipdef *chip)
{
- struct device_node *np = client->dev.of_node, *child;
struct pca963x_platform_data *pdata;
struct led_info *pca963x_leds;
+ struct fwnode_handle *child;
int count;
- count = of_get_child_count(np);
+ count = device_get_child_node_count(&client->dev);
if (!count || count > chip->n_leds)
return ERR_PTR(-ENODEV);
@@ -305,18 +295,22 @@ pca963x_dt_init(struct i2c_client *client, struct pca963x_chipdef *chip)
if (!pca963x_leds)
return ERR_PTR(-ENOMEM);
- for_each_child_of_node(np, child) {
+ device_for_each_child_node(&client->dev, child) {
struct led_info led = {};
u32 reg;
int res;
- res = of_property_read_u32(child, "reg", &reg);
+ res = fwnode_property_read_u32(child, "reg", &reg);
if ((res != 0) || (reg >= chip->n_leds))
continue;
- led.name =
- of_get_property(child, "label", NULL) ? : child->name;
- led.default_trigger =
- of_get_property(child, "linux,default-trigger", NULL);
+
+ res = fwnode_property_read_string(child, "label", &led.name);
+ if ((res != 0) && is_of_node(child))
+ led.name = to_of_node(child)->name;
+
+ fwnode_property_read_string(child, "linux,default-trigger",
+ &led.default_trigger);
+
pca963x_leds[reg] = led;
}
pdata = devm_kzalloc(&client->dev,
@@ -328,22 +322,23 @@ pca963x_dt_init(struct i2c_client *client, struct pca963x_chipdef *chip)
pdata->leds.num_leds = chip->n_leds;
/* default to open-drain unless totem pole (push-pull) is specified */
- if (of_property_read_bool(np, "nxp,totem-pole"))
+ if (device_property_read_bool(&client->dev, "nxp,totem-pole"))
pdata->outdrv = PCA963X_TOTEM_POLE;
else
pdata->outdrv = PCA963X_OPEN_DRAIN;
/* default to software blinking unless hardware blinking is specified */
- if (of_property_read_bool(np, "nxp,hw-blink"))
+ if (device_property_read_bool(&client->dev, "nxp,hw-blink"))
pdata->blink_type = PCA963X_HW_BLINK;
else
pdata->blink_type = PCA963X_SW_BLINK;
- if (of_property_read_u32(np, "nxp,period-scale", &chip->scaling))
+ if (device_property_read_u32(&client->dev, "nxp,period-scale",
+ &chip->scaling))
chip->scaling = 1000;
/* default to non-inverted output, unless inverted is specified */
- if (of_property_read_bool(np, "nxp,inverted-out"))
+ if (device_property_read_bool(&client->dev, "nxp,inverted-out"))
pdata->dir = PCA963X_INVERTED;
else
pdata->dir = PCA963X_NORMAL;
@@ -359,13 +354,6 @@ static const struct of_device_id of_pca963x_match[] = {
{},
};
MODULE_DEVICE_TABLE(of, of_pca963x_match);
-#else
-static struct pca963x_platform_data *
-pca963x_dt_init(struct i2c_client *client, struct pca963x_chipdef *chip)
-{
- return ERR_PTR(-ENODEV);
-}
-#endif
static int pca963x_probe(struct i2c_client *client,
const struct i2c_device_id *id)
@@ -376,20 +364,11 @@ static int pca963x_probe(struct i2c_client *client,
struct pca963x_chipdef *chip;
int i, err;
- if (id) {
- chip = &pca963x_chipdefs[id->driver_data];
- } else {
- const struct acpi_device_id *acpi_id;
-
- acpi_id = acpi_match_device(pca963x_acpi_ids, &client->dev);
- if (!acpi_id)
- return -ENODEV;
- chip = &pca963x_chipdefs[acpi_id->driver_data];
- }
+ chip = &pca963x_chipdefs[id->driver_data];
pdata = dev_get_platdata(&client->dev);
if (!pdata) {
- pdata = pca963x_dt_init(client, chip);
+ pdata = pca963x_get_pdata(client, chip);
if (IS_ERR(pdata)) {
dev_warn(&client->dev, "could not parse configuration\n");
pdata = NULL;
@@ -495,8 +474,7 @@ static int pca963x_remove(struct i2c_client *client)
static struct i2c_driver pca963x_driver = {
.driver = {
.name = "leds-pca963x",
- .of_match_table = of_match_ptr(of_pca963x_match),
- .acpi_match_table = ACPI_PTR(pca963x_acpi_ids),
+ .of_match_table = of_pca963x_match,
},
.probe = pca963x_probe,
.remove = pca963x_remove,
diff --git a/drivers/mfd/ti-lmu.c b/drivers/mfd/ti-lmu.c
index 37d0bdb291c3..b06cb908d1aa 100644
--- a/drivers/mfd/ti-lmu.c
+++ b/drivers/mfd/ti-lmu.c
@@ -54,14 +54,6 @@ static void ti_lmu_disable_hw(void *data)
gpiod_set_value(lmu->en_gpio, 0);
}
-static const struct mfd_cell lm3532_devices[] = {
- {
- .name = "ti-lmu-backlight",
- .id = LM3532,
- .of_compatible = "ti,lm3532-backlight",
- },
-};
-
#define LM363X_REGULATOR(_id) \
{ \
.name = "lm363x-regulator", \
@@ -141,7 +133,6 @@ static const struct ti_lmu_data chip##_data = \
.max_register = max_reg, \
} \
-TI_LMU_DATA(lm3532, LM3532_MAX_REG);
TI_LMU_DATA(lm3631, LM3631_MAX_REG);
TI_LMU_DATA(lm3632, LM3632_MAX_REG);
TI_LMU_DATA(lm3633, LM3633_MAX_REG);
@@ -211,7 +202,6 @@ static int ti_lmu_probe(struct i2c_client *cl, const struct i2c_device_id *id)
}
static const struct of_device_id ti_lmu_of_match[] = {
- { .compatible = "ti,lm3532", .data = &lm3532_data },
{ .compatible = "ti,lm3631", .data = &lm3631_data },
{ .compatible = "ti,lm3632", .data = &lm3632_data },
{ .compatible = "ti,lm3633", .data = &lm3633_data },
@@ -222,7 +212,6 @@ static const struct of_device_id ti_lmu_of_match[] = {
MODULE_DEVICE_TABLE(of, ti_lmu_of_match);
static const struct i2c_device_id ti_lmu_ids[] = {
- { "lm3532", LM3532 },
{ "lm3631", LM3631 },
{ "lm3632", LM3632 },
{ "lm3633", LM3633 },
diff --git a/include/linux/mfd/ti-lmu-register.h b/include/linux/mfd/ti-lmu-register.h
index 2125c7c02818..f09510561a55 100644
--- a/include/linux/mfd/ti-lmu-register.h
+++ b/include/linux/mfd/ti-lmu-register.h
@@ -15,50 +15,6 @@
#include <linux/bitops.h>
-/* LM3532 */
-#define LM3532_REG_OUTPUT_CFG 0x10
-#define LM3532_ILED1_CFG_MASK 0x03
-#define LM3532_ILED2_CFG_MASK 0x0C
-#define LM3532_ILED3_CFG_MASK 0x30
-#define LM3532_ILED1_CFG_SHIFT 0
-#define LM3532_ILED2_CFG_SHIFT 2
-#define LM3532_ILED3_CFG_SHIFT 4
-
-#define LM3532_REG_RAMPUP 0x12
-#define LM3532_REG_RAMPDN LM3532_REG_RAMPUP
-#define LM3532_RAMPUP_MASK 0x07
-#define LM3532_RAMPUP_SHIFT 0
-#define LM3532_RAMPDN_MASK 0x38
-#define LM3532_RAMPDN_SHIFT 3
-
-#define LM3532_REG_ENABLE 0x1D
-
-#define LM3532_REG_PWM_A_CFG 0x13
-#define LM3532_PWM_A_MASK 0x05 /* zone 0 */
-#define LM3532_PWM_ZONE_0 BIT(2)
-
-#define LM3532_REG_PWM_B_CFG 0x14
-#define LM3532_PWM_B_MASK 0x09 /* zone 1 */
-#define LM3532_PWM_ZONE_1 BIT(3)
-
-#define LM3532_REG_PWM_C_CFG 0x15
-#define LM3532_PWM_C_MASK 0x11 /* zone 2 */
-#define LM3532_PWM_ZONE_2 BIT(4)
-
-#define LM3532_REG_ZONE_CFG_A 0x16
-#define LM3532_REG_ZONE_CFG_B 0x18
-#define LM3532_REG_ZONE_CFG_C 0x1A
-#define LM3532_ZONE_MASK (BIT(2) | BIT(3) | BIT(4))
-#define LM3532_ZONE_0 0
-#define LM3532_ZONE_1 BIT(2)
-#define LM3532_ZONE_2 BIT(3)
-
-#define LM3532_REG_BRT_A 0x70 /* zone 0 */
-#define LM3532_REG_BRT_B 0x76 /* zone 1 */
-#define LM3532_REG_BRT_C 0x7C /* zone 2 */
-
-#define LM3532_MAX_REG 0x7E
-
/* LM3631 */
#define LM3631_REG_DEVCTRL 0x00
#define LM3631_LCD_EN_MASK BIT(1)
diff --git a/include/linux/mfd/ti-lmu.h b/include/linux/mfd/ti-lmu.h
index 1ef51ed36be5..7762c1bce55d 100644
--- a/include/linux/mfd/ti-lmu.h
+++ b/include/linux/mfd/ti-lmu.h
@@ -22,7 +22,6 @@
#define LMU_EVENT_MONITOR_DONE 0x01
enum ti_lmu_id {
- LM3532,
LM3631,
LM3632,
LM3633,
diff --git a/sound/usb/line6/toneport.c b/sound/usb/line6/toneport.c
index 19bee725de00..ecbe5f3beda5 100644
--- a/sound/usb/line6/toneport.c
+++ b/sound/usb/line6/toneport.c
@@ -291,8 +291,8 @@ static bool toneport_has_led(struct usb_line6_toneport *toneport)
}
}
-static const char * const led_colors[2] = { "red", "green" };
-static const int led_init_vals[2] = { 0x00, 0x26 };
+static const char * const toneport_led_colors[2] = { "red", "green" };
+static const int toneport_led_init_vals[2] = { 0x00, 0x26 };
static void toneport_update_led(struct usb_line6_toneport *toneport)
{
@@ -320,9 +320,9 @@ static int toneport_init_leds(struct usb_line6_toneport *toneport)
led->toneport = toneport;
snprintf(led->name, sizeof(led->name), "%s::%s",
- dev_name(dev), led_colors[i]);
+ dev_name(dev), toneport_led_colors[i]);
leddev->name = led->name;
- leddev->brightness = led_init_vals[i];
+ leddev->brightness = toneport_led_init_vals[i];
leddev->max_brightness = 0x26;
leddev->brightness_set = toneport_led_brightness_set;
err = led_classdev_register(dev, leddev);