bnxt_en: Add support for L2 doorbell size.

Read the L2 doorbell size from the firmware and only map the portion
of the doorbell BAR for L2 use.  This will leave the remaining doorbell
BAR available for the RoCE driver to use.  The RoCE driver can map
the remaining portion as write-combining to support the push feature.

Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

2 files changed, 37 insertions, 7 deletions

diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
index 2e564026fe96..8f11344b8055 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -6364,6 +6364,7 @@ static int bnxt_hwrm_func_qcfg(struct bnxt *bp)
 {
 	struct hwrm_func_qcfg_input req = {0};
 	struct hwrm_func_qcfg_output *resp = bp->hwrm_cmd_resp_addr;
+	u32 min_db_offset = 0;
 	u16 flags;
 	int rc;
 
@@ -6412,6 +6413,21 @@ static int bnxt_hwrm_func_qcfg(struct bnxt *bp)
 	if (!bp->max_mtu)
 		bp->max_mtu = BNXT_MAX_MTU;
 
+	if (bp->db_size)
+		goto func_qcfg_exit;
+
+	if (bp->flags & BNXT_FLAG_CHIP_P5) {
+		if (BNXT_PF(bp))
+			min_db_offset = DB_PF_OFFSET_P5;
+		else
+			min_db_offset = DB_VF_OFFSET_P5;
+	}
+	bp->db_size = PAGE_ALIGN(le16_to_cpu(resp->l2_doorbell_bar_size_kb) *
+				 1024);
+	if (!bp->db_size || bp->db_size > pci_resource_len(bp->pdev, 2) ||
+	    bp->db_size <= min_db_offset)
+		bp->db_size = pci_resource_len(bp->pdev, 2);
+
 func_qcfg_exit:
 	mutex_unlock(&bp->hwrm_cmd_lock);
 	return rc;
@@ -10898,6 +10914,9 @@ static int bnxt_init_board(struct pci_dev *pdev, struct net_device *dev)
 	bp->dev = dev;
 	bp->pdev = pdev;
 
+	/* Doorbell BAR bp->bar1 is mapped after bnxt_fw_init_one_p2()
+	 * determines the BAR size.
+	 */
 	bp->bar0 = pci_ioremap_bar(pdev, 0);
 	if (!bp->bar0) {
 		dev_err(&pdev->dev, "Cannot map device registers, aborting\n");
@@ -10905,13 +10924,6 @@ static int bnxt_init_board(struct pci_dev *pdev, struct net_device *dev)
 		goto init_err_release;
 	}
 
-	bp->bar1 = pci_ioremap_bar(pdev, 2);
-	if (!bp->bar1) {
-		dev_err(&pdev->dev, "Cannot map doorbell registers, aborting\n");
-		rc = -ENOMEM;
-		goto init_err_release;
-	}
-
 	bp->bar2 = pci_ioremap_bar(pdev, 4);
 	if (!bp->bar2) {
 		dev_err(&pdev->dev, "Cannot map bar4 registers, aborting\n");
@@ -11833,6 +11845,16 @@ static int bnxt_pcie_dsn_get(struct bnxt *bp, u8 dsn[])
 	return 0;
 }
 
+static int bnxt_map_db_bar(struct bnxt *bp)
+{
+	if (!bp->db_size)
+		return -ENODEV;
+	bp->bar1 = pci_iomap(bp->pdev, 2, bp->db_size);
+	if (!bp->bar1)
+		return -ENOMEM;
+	return 0;
+}
+
 static int bnxt_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 {
 	struct net_device *dev;
@@ -11893,6 +11915,13 @@ static int bnxt_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (rc)
 		goto init_err_pci_clean;
 
+	rc = bnxt_map_db_bar(bp);
+	if (rc) {
+		dev_err(&pdev->dev, "Cannot map doorbell BAR rc = %d, aborting\n",
+			rc);
+		goto init_err_pci_clean;
+	}
+
 	dev->hw_features = NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM | NETIF_F_SG |
 			   NETIF_F_TSO | NETIF_F_TSO6 |
 			   NETIF_F_GSO_UDP_TUNNEL | NETIF_F_GSO_GRE |
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.h b/drivers/net/ethernet/broadcom/bnxt/bnxt.h
index a3b80409c25e..6114b0a576ff 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.h
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.h
@@ -1820,6 +1820,7 @@ struct bnxt {
 	/* ensure atomic 64-bit doorbell writes on 32-bit systems. */
 	spinlock_t		db_lock;
 #endif
+	int			db_size;
 
 #define BNXT_NTP_FLTR_MAX_FLTR	4096
 #define BNXT_NTP_FLTR_HASH_SIZE	512