summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2017-02-20 17:26:11 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2017-02-20 17:26:11 -0800
commit85adbcd54f0982040c8cc7a086f01554b8f64427 (patch)
treeb5210dcee692b928bd133541dba31f487e246ac8
parentf790bd9c8e826434ab6c326b225276ed0f73affe (diff)
parent57f22cd29cf1b4ff2aea8505eae2d3ed71ca5de4 (diff)
downloadlinux-85adbcd54f0982040c8cc7a086f01554b8f64427.tar.bz2
Merge tag 'spi-v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown: "This release is mainly a collection of driver specific updates, including a few nice cleanups to make drivers use more core features. - automatically use the parent device to allocate DMA buffers if there wasn't an explicitly configured device. - fixes for leaks on allocation. - a small piece of the start of SPI slave support, a feature that's been on the cards for over a decade!" * tag 'spi-v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (55 commits) spi: spi-ti-qspi: Fix error handling spi: spi-ti-qspi: Fix error handling spi: lantiq-ssc: activate under COMPILE_TEST spi: armada-3700: Remove spi_master_put in a3700_spi_remove() spi: ti-qspi: revise ti_qspi_probe() failure flow spi: spi-ep93xx: simplify GPIO chip selects spi: rspi: Replaces "n" by "len" in qspi_transfer_*() spi: rspi: Fixes bogus received byte in qspi_transfer_in() spi: bcm-qspi: Remove unnecessary platform_set_drvdata() spi: bcm-qspi: Fix bcm_qspi_bspi_read() performance spi: lantiq-ssc: add support for Lantiq SSC SPI controller spi: s3c64xx: fix inconsistency between binding and driver spi: armada-3700: Remove .owner field for driver spi: bcm-qspi: Added mspi read fallback in bcm_qspi_flash_read() spi: fix device-node leaks spi: mediatek: Only do dma for 4-byte aligned buffers spi: When no dma_chan map buffers with spi_master's parent spi: pca2xx-pci: Allow MSI spi: pxa2xx: Prepare for edge-triggered interrupts spi: pxa2xx: Add support for Intel Gemini Lake ...
-rw-r--r--Documentation/devicetree/bindings/spi/spi-lantiq-ssc.txt29
-rw-r--r--Documentation/devicetree/bindings/spi/spi-rockchip.txt7
-rw-r--r--Documentation/spi/ep93xx_spi105
-rw-r--r--arch/arm/mach-ep93xx/edb93xx.c31
-rw-r--r--arch/arm/mach-ep93xx/simone.c63
-rw-r--r--arch/arm/mach-ep93xx/vision_ep9307.c88
-rw-r--r--drivers/spi/Kconfig13
-rw-r--r--drivers/spi/Makefile1
-rw-r--r--drivers/spi/spi-armada-3700.c14
-rw-r--r--drivers/spi/spi-ath79.c23
-rw-r--r--drivers/spi/spi-bcm-qspi.c194
-rw-r--r--drivers/spi/spi-bcm53xx.c18
-rw-r--r--drivers/spi/spi-dw.c8
-rw-r--r--drivers/spi/spi-dw.h1
-rw-r--r--drivers/spi/spi-ep93xx.c139
-rw-r--r--drivers/spi/spi-fsl-lpspi.c8
-rw-r--r--drivers/spi/spi-fsl-spi.c17
-rw-r--r--drivers/spi/spi-imx.c16
-rw-r--r--drivers/spi/spi-lantiq-ssc.c983
-rw-r--r--drivers/spi/spi-mpc52xx.c12
-rw-r--r--drivers/spi/spi-mt65xx.c37
-rw-r--r--drivers/spi/spi-ppc4xx.c7
-rw-r--r--drivers/spi/spi-pxa2xx-pci.c32
-rw-r--r--drivers/spi/spi-pxa2xx.c36
-rw-r--r--drivers/spi/spi-rockchip.c5
-rw-r--r--drivers/spi/spi-rspi.c9
-rw-r--r--drivers/spi/spi-s3c64xx.c59
-rw-r--r--drivers/spi/spi-sh-msiof.c4
-rw-r--r--drivers/spi/spi-ti-qspi.c18
-rw-r--r--drivers/spi/spi-topcliff-pch.c31
-rw-r--r--drivers/spi/spi.c78
-rw-r--r--include/linux/platform_data/spi-ep93xx.h17
-rw-r--r--include/linux/pxa2xx_ssp.h14
33 files changed, 1502 insertions, 615 deletions
diff --git a/Documentation/devicetree/bindings/spi/spi-lantiq-ssc.txt b/Documentation/devicetree/bindings/spi/spi-lantiq-ssc.txt
new file mode 100644
index 000000000000..6069b95a883d
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-lantiq-ssc.txt
@@ -0,0 +1,29 @@
+Lantiq Synchronous Serial Controller (SSC) SPI master driver
+
+Required properties:
+- compatible: "lantiq,ase-spi", "lantiq,falcon-spi", "lantiq,xrx100-spi"
+- #address-cells: see spi-bus.txt
+- #size-cells: see spi-bus.txt
+- reg: address and length of the spi master registers
+- interrupts: should contain the "spi_rx", "spi_tx" and "spi_err" interrupt.
+
+
+Optional properties:
+- clocks: spi clock phandle
+- num-cs: see spi-bus.txt, set to 8 if unset
+- base-cs: the number of the first chip select, set to 1 if unset.
+
+Example:
+
+
+spi: spi@E100800 {
+ compatible = "lantiq,xrx200-spi", "lantiq,xrx100-spi";
+ reg = <0xE100800 0x100>;
+ interrupt-parent = <&icu0>;
+ interrupts = <22 23 24>;
+ interrupt-names = "spi_rx", "spi_tx", "spi_err";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ num-cs = <6>;
+ base-cs = <1>;
+};
diff --git a/Documentation/devicetree/bindings/spi/spi-rockchip.txt b/Documentation/devicetree/bindings/spi/spi-rockchip.txt
index d2ca153614f9..83da4931d832 100644
--- a/Documentation/devicetree/bindings/spi/spi-rockchip.txt
+++ b/Documentation/devicetree/bindings/spi/spi-rockchip.txt
@@ -31,6 +31,10 @@ Optional Properties:
- rx-sample-delay-ns: nanoseconds to delay after the SCLK edge before sampling
Rx data (may need to be fine tuned for high capacitance lines).
No delay (0) by default.
+- pinctrl-names: Names for the pin configuration(s); may be "default" or
+ "sleep", where the "sleep" configuration may describe the state
+ the pins should be in during system suspend. See also
+ pinctrl/pinctrl-bindings.txt.
Example:
@@ -46,4 +50,7 @@ Example:
interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>;
clock-names = "spiclk", "apb_pclk";
+ pinctrl-0 = <&spi1_pins>;
+ pinctrl-1 = <&spi1_sleep>;
+ pinctrl-names = "default", "sleep";
};
diff --git a/Documentation/spi/ep93xx_spi b/Documentation/spi/ep93xx_spi
deleted file mode 100644
index 832ddce6e5fb..000000000000
--- a/Documentation/spi/ep93xx_spi
+++ /dev/null
@@ -1,105 +0,0 @@
-Cirrus EP93xx SPI controller driver HOWTO
-=========================================
-
-ep93xx_spi driver brings SPI master support for EP93xx SPI controller. Chip
-selects are implemented with GPIO lines.
-
-NOTE: If possible, don't use SFRMOUT (SFRM1) signal as a chip select. It will
-not work correctly (it cannot be controlled by software). Use GPIO lines
-instead.
-
-Sample configuration
-====================
-
-Typically driver configuration is done in platform board files (the files under
-arch/arm/mach-ep93xx/*.c). In this example we configure MMC over SPI through
-this driver on TS-7260 board. You can adapt the code to suit your needs.
-
-This example uses EGPIO9 as SD/MMC card chip select (this is wired in DIO1
-header on the board).
-
-You need to select CONFIG_MMC_SPI to use mmc_spi driver.
-
-arch/arm/mach-ep93xx/ts72xx.c:
-
-...
-#include <linux/gpio.h>
-#include <linux/spi/spi.h>
-
-#include <linux/platform_data/spi-ep93xx.h>
-
-/* this is our GPIO line used for chip select */
-#define MMC_CHIP_SELECT_GPIO EP93XX_GPIO_LINE_EGPIO9
-
-static int ts72xx_mmc_spi_setup(struct spi_device *spi)
-{
- int err;
-
- err = gpio_request(MMC_CHIP_SELECT_GPIO, spi->modalias);
- if (err)
- return err;
-
- gpio_direction_output(MMC_CHIP_SELECT_GPIO, 1);
-
- return 0;
-}
-
-static void ts72xx_mmc_spi_cleanup(struct spi_device *spi)
-{
- gpio_set_value(MMC_CHIP_SELECT_GPIO, 1);
- gpio_direction_input(MMC_CHIP_SELECT_GPIO);
- gpio_free(MMC_CHIP_SELECT_GPIO);
-}
-
-static void ts72xx_mmc_spi_cs_control(struct spi_device *spi, int value)
-{
- gpio_set_value(MMC_CHIP_SELECT_GPIO, value);
-}
-
-static struct ep93xx_spi_chip_ops ts72xx_mmc_spi_ops = {
- .setup = ts72xx_mmc_spi_setup,
- .cleanup = ts72xx_mmc_spi_cleanup,
- .cs_control = ts72xx_mmc_spi_cs_control,
-};
-
-static struct spi_board_info ts72xx_spi_devices[] __initdata = {
- {
- .modalias = "mmc_spi",
- .controller_data = &ts72xx_mmc_spi_ops,
- /*
- * We use 10 MHz even though the maximum is 7.4 MHz. The driver
- * will limit it automatically to max. frequency.
- */
- .max_speed_hz = 10 * 1000 * 1000,
- .bus_num = 0,
- .chip_select = 0,
- .mode = SPI_MODE_0,
- },
-};
-
-static struct ep93xx_spi_info ts72xx_spi_info = {
- .num_chipselect = ARRAY_SIZE(ts72xx_spi_devices),
-};
-
-static void __init ts72xx_init_machine(void)
-{
- ...
- ep93xx_register_spi(&ts72xx_spi_info, ts72xx_spi_devices,
- ARRAY_SIZE(ts72xx_spi_devices));
-}
-
-The driver can use DMA for the transfers also. In this case ts72xx_spi_info
-becomes:
-
-static struct ep93xx_spi_info ts72xx_spi_info = {
- .num_chipselect = ARRAY_SIZE(ts72xx_spi_devices),
- .use_dma = true;
-};
-
-Note that CONFIG_EP93XX_DMA should be enabled as well.
-
-Thanks to
-=========
-Martin Guy, H. Hartley Sweeten and others who helped me during development of
-the driver. Simplemachines.it donated me a Sim.One board which I used testing
-the driver on EP9307.
diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c
index ad92d9f7e4df..0ac176386789 100644
--- a/arch/arm/mach-ep93xx/edb93xx.c
+++ b/arch/arm/mach-ep93xx/edb93xx.c
@@ -27,7 +27,6 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
-#include <linux/gpio.h>
#include <linux/i2c.h>
#include <linux/i2c-gpio.h>
#include <linux/spi/spi.h>
@@ -106,33 +105,10 @@ static struct cs4271_platform_data edb93xx_cs4271_data = {
.gpio_nreset = -EINVAL, /* filled in later */
};
-static int edb93xx_cs4271_hw_setup(struct spi_device *spi)
-{
- return gpio_request_one(EP93XX_GPIO_LINE_EGPIO6,
- GPIOF_OUT_INIT_HIGH, spi->modalias);
-}
-
-static void edb93xx_cs4271_hw_cleanup(struct spi_device *spi)
-{
- gpio_free(EP93XX_GPIO_LINE_EGPIO6);
-}
-
-static void edb93xx_cs4271_hw_cs_control(struct spi_device *spi, int value)
-{
- gpio_set_value(EP93XX_GPIO_LINE_EGPIO6, value);
-}
-
-static struct ep93xx_spi_chip_ops edb93xx_cs4271_hw = {
- .setup = edb93xx_cs4271_hw_setup,
- .cleanup = edb93xx_cs4271_hw_cleanup,
- .cs_control = edb93xx_cs4271_hw_cs_control,
-};
-
static struct spi_board_info edb93xx_spi_board_info[] __initdata = {
{
.modalias = "cs4271",
.platform_data = &edb93xx_cs4271_data,
- .controller_data = &edb93xx_cs4271_hw,
.max_speed_hz = 6000000,
.bus_num = 0,
.chip_select = 0,
@@ -140,8 +116,13 @@ static struct spi_board_info edb93xx_spi_board_info[] __initdata = {
},
};
+static int edb93xx_spi_chipselects[] __initdata = {
+ EP93XX_GPIO_LINE_EGPIO6,
+};
+
static struct ep93xx_spi_info edb93xx_spi_info __initdata = {
- .num_chipselect = ARRAY_SIZE(edb93xx_spi_board_info),
+ .chipselect = edb93xx_spi_chipselects,
+ .num_chipselect = ARRAY_SIZE(edb93xx_spi_chipselects),
};
static void __init edb93xx_register_spi(void)
diff --git a/arch/arm/mach-ep93xx/simone.c b/arch/arm/mach-ep93xx/simone.c
index 7bb540c421ee..c7a40f245892 100644
--- a/arch/arm/mach-ep93xx/simone.c
+++ b/arch/arm/mach-ep93xx/simone.c
@@ -49,56 +49,6 @@ static struct ep93xxfb_mach_info __initdata simone_fb_info = {
#define MMC_CARD_DETECT_GPIO EP93XX_GPIO_LINE_EGPIO0
/*
- * Up to v1.3, the Sim.One used SFRMOUT as SD card chip select, but this goes
- * low between multi-message command blocks. From v1.4, it uses a GPIO instead.
- * v1.3 parts will still work, since the signal on SFRMOUT is automatic.
- */
-#define MMC_CHIP_SELECT_GPIO EP93XX_GPIO_LINE_EGPIO1
-
-/*
- * MMC SPI chip select GPIO handling. If you are using SFRMOUT (SFRM1) signal,
- * you can leave these empty and pass NULL as .controller_data.
- */
-
-static int simone_mmc_spi_setup(struct spi_device *spi)
-{
- unsigned int gpio = MMC_CHIP_SELECT_GPIO;
- int err;
-
- err = gpio_request(gpio, spi->modalias);
- if (err)
- return err;
-
- err = gpio_direction_output(gpio, 1);
- if (err) {
- gpio_free(gpio);
- return err;
- }
-
- return 0;
-}
-
-static void simone_mmc_spi_cleanup(struct spi_device *spi)
-{
- unsigned int gpio = MMC_CHIP_SELECT_GPIO;
-
- gpio_set_value(gpio, 1);
- gpio_direction_input(gpio);
- gpio_free(gpio);
-}
-
-static void simone_mmc_spi_cs_control(struct spi_device *spi, int value)
-{
- gpio_set_value(MMC_CHIP_SELECT_GPIO, value);
-}
-
-static struct ep93xx_spi_chip_ops simone_mmc_spi_ops = {
- .setup = simone_mmc_spi_setup,
- .cleanup = simone_mmc_spi_cleanup,
- .cs_control = simone_mmc_spi_cs_control,
-};
-
-/*
* MMC card detection GPIO setup.
*/
@@ -152,7 +102,6 @@ static struct mmc_spi_platform_data simone_mmc_spi_data = {
static struct spi_board_info simone_spi_devices[] __initdata = {
{
.modalias = "mmc_spi",
- .controller_data = &simone_mmc_spi_ops,
.platform_data = &simone_mmc_spi_data,
/*
* We use 10 MHz even though the maximum is 3.7 MHz. The driver
@@ -165,8 +114,18 @@ static struct spi_board_info simone_spi_devices[] __initdata = {
},
};
+/*
+ * Up to v1.3, the Sim.One used SFRMOUT as SD card chip select, but this goes
+ * low between multi-message command blocks. From v1.4, it uses a GPIO instead.
+ * v1.3 parts will still work, since the signal on SFRMOUT is automatic.
+ */
+static int simone_spi_chipselects[] __initdata = {
+ EP93XX_GPIO_LINE_EGPIO1,
+};
+
static struct ep93xx_spi_info simone_spi_info __initdata = {
- .num_chipselect = ARRAY_SIZE(simone_spi_devices),
+ .chipselect = simone_spi_chipselects,
+ .num_chipselect = ARRAY_SIZE(simone_spi_chipselects),
.use_dma = 1,
};
diff --git a/arch/arm/mach-ep93xx/vision_ep9307.c b/arch/arm/mach-ep93xx/vision_ep9307.c
index 5cced5988498..1daf9441058c 100644
--- a/arch/arm/mach-ep93xx/vision_ep9307.c
+++ b/arch/arm/mach-ep93xx/vision_ep9307.c
@@ -175,33 +175,9 @@ static struct cs4271_platform_data vision_cs4271_data = {
.gpio_nreset = EP93XX_GPIO_LINE_H(2),
};
-static int vision_cs4271_hw_setup(struct spi_device *spi)
-{
- return gpio_request_one(EP93XX_GPIO_LINE_EGPIO6,
- GPIOF_OUT_INIT_HIGH, spi->modalias);
-}
-
-static void vision_cs4271_hw_cleanup(struct spi_device *spi)
-{
- gpio_free(EP93XX_GPIO_LINE_EGPIO6);
-}
-
-static void vision_cs4271_hw_cs_control(struct spi_device *spi, int value)
-{
- gpio_set_value(EP93XX_GPIO_LINE_EGPIO6, value);
-}
-
-static struct ep93xx_spi_chip_ops vision_cs4271_hw = {
- .setup = vision_cs4271_hw_setup,
- .cleanup = vision_cs4271_hw_cleanup,
- .cs_control = vision_cs4271_hw_cs_control,
-};
-
/*************************************************************************
* SPI Flash
*************************************************************************/
-#define VISION_SPI_FLASH_CS EP93XX_GPIO_LINE_EGPIO7
-
static struct mtd_partition vision_spi_flash_partitions[] = {
{
.name = "SPI bootstrap",
@@ -224,68 +200,20 @@ static struct flash_platform_data vision_spi_flash_data = {
.nr_parts = ARRAY_SIZE(vision_spi_flash_partitions),
};
-static int vision_spi_flash_hw_setup(struct spi_device *spi)
-{
- return gpio_request_one(VISION_SPI_FLASH_CS, GPIOF_INIT_HIGH,
- spi->modalias);
-}
-
-static void vision_spi_flash_hw_cleanup(struct spi_device *spi)
-{
- gpio_free(VISION_SPI_FLASH_CS);
-}
-
-static void vision_spi_flash_hw_cs_control(struct spi_device *spi, int value)
-{
- gpio_set_value(VISION_SPI_FLASH_CS, value);
-}
-
-static struct ep93xx_spi_chip_ops vision_spi_flash_hw = {
- .setup = vision_spi_flash_hw_setup,
- .cleanup = vision_spi_flash_hw_cleanup,
- .cs_control = vision_spi_flash_hw_cs_control,
-};
-
/*************************************************************************
* SPI SD/MMC host
*************************************************************************/
-#define VISION_SPI_MMC_CS EP93XX_GPIO_LINE_G(2)
-#define VISION_SPI_MMC_WP EP93XX_GPIO_LINE_F(0)
-#define VISION_SPI_MMC_CD EP93XX_GPIO_LINE_EGPIO15
-
static struct mmc_spi_platform_data vision_spi_mmc_data = {
.detect_delay = 100,
.powerup_msecs = 100,
.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
.flags = MMC_SPI_USE_CD_GPIO | MMC_SPI_USE_RO_GPIO,
- .cd_gpio = VISION_SPI_MMC_CD,
+ .cd_gpio = EP93XX_GPIO_LINE_EGPIO15,
.cd_debounce = 1,
- .ro_gpio = VISION_SPI_MMC_WP,
+ .ro_gpio = EP93XX_GPIO_LINE_F(0),
.caps2 = MMC_CAP2_RO_ACTIVE_HIGH,
};
-static int vision_spi_mmc_hw_setup(struct spi_device *spi)
-{
- return gpio_request_one(VISION_SPI_MMC_CS, GPIOF_INIT_HIGH,
- spi->modalias);
-}
-
-static void vision_spi_mmc_hw_cleanup(struct spi_device *spi)
-{
- gpio_free(VISION_SPI_MMC_CS);
-}
-
-static void vision_spi_mmc_hw_cs_control(struct spi_device *spi, int value)
-{
- gpio_set_value(VISION_SPI_MMC_CS, value);
-}
-
-static struct ep93xx_spi_chip_ops vision_spi_mmc_hw = {
- .setup = vision_spi_mmc_hw_setup,
- .cleanup = vision_spi_mmc_hw_cleanup,
- .cs_control = vision_spi_mmc_hw_cs_control,
-};
-
/*************************************************************************
* SPI Bus
*************************************************************************/
@@ -293,7 +221,6 @@ static struct spi_board_info vision_spi_board_info[] __initdata = {
{
.modalias = "cs4271",
.platform_data = &vision_cs4271_data,
- .controller_data = &vision_cs4271_hw,
.max_speed_hz = 6000000,
.bus_num = 0,
.chip_select = 0,
@@ -301,7 +228,6 @@ static struct spi_board_info vision_spi_board_info[] __initdata = {
}, {
.modalias = "sst25l",
.platform_data = &vision_spi_flash_data,
- .controller_data = &vision_spi_flash_hw,
.max_speed_hz = 20000000,
.bus_num = 0,
.chip_select = 1,
@@ -309,7 +235,6 @@ static struct spi_board_info vision_spi_board_info[] __initdata = {
}, {
.modalias = "mmc_spi",
.platform_data = &vision_spi_mmc_data,
- .controller_data = &vision_spi_mmc_hw,
.max_speed_hz = 20000000,
.bus_num = 0,
.chip_select = 2,
@@ -317,8 +242,15 @@ static struct spi_board_info vision_spi_board_info[] __initdata = {
},
};
+static int vision_spi_chipselects[] __initdata = {
+ EP93XX_GPIO_LINE_EGPIO6,
+ EP93XX_GPIO_LINE_EGPIO7,
+ EP93XX_GPIO_LINE_G(2),
+};
+
static struct ep93xx_spi_info vision_spi_master __initdata = {
- .num_chipselect = ARRAY_SIZE(vision_spi_board_info),
+ .chipselect = vision_spi_chipselects,
+ .num_chipselect = ARRAY_SIZE(vision_spi_chipselects),
.use_dma = 1,
};
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 2922a9908302..25ae7f2e44b5 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -162,7 +162,8 @@ config SPI_BCM63XX_HSSPI
config SPI_BCM_QSPI
tristate "Broadcom BSPI and MSPI controller support"
- depends on ARCH_BRCMSTB || ARCH_BCM || ARCH_BCM_IPROC || COMPILE_TEST
+ depends on ARCH_BRCMSTB || ARCH_BCM || ARCH_BCM_IPROC || \
+ BMIPS_GENERIC || COMPILE_TEST
default ARCH_BCM_IPROC
help
Enables support for the Broadcom SPI flash and MSPI controller.
@@ -263,7 +264,7 @@ config SPI_EP93XX
mode.
config SPI_FALCON
- tristate "Falcon SPI controller support"
+ bool "Falcon SPI controller support"
depends on SOC_FALCON
help
The external bus unit (EBU) found on the FALC-ON SoC has SPI
@@ -416,6 +417,14 @@ config SPI_NUC900
help
SPI driver for Nuvoton NUC900 series ARM SoCs
+config SPI_LANTIQ_SSC
+ tristate "Lantiq SSC SPI controller"
+ depends on LANTIQ || COMPILE_TEST
+ help
+ This driver supports the Lantiq SSC SPI controller in master
+ mode. This controller is found on Intel (former Lantiq) SoCs like
+ the Danube, Falcon, xRX200, xRX300.
+
config SPI_OC_TINY
tristate "OpenCores tiny SPI"
depends on GPIOLIB || COMPILE_TEST
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index 7a6b64662c82..b375a7a89216 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -49,6 +49,7 @@ obj-$(CONFIG_SPI_FSL_SPI) += spi-fsl-spi.o
obj-$(CONFIG_SPI_GPIO) += spi-gpio.o
obj-$(CONFIG_SPI_IMG_SPFI) += spi-img-spfi.o
obj-$(CONFIG_SPI_IMX) += spi-imx.o
+obj-$(CONFIG_SPI_LANTIQ_SSC) += spi-lantiq-ssc.o
obj-$(CONFIG_SPI_JCORE) += spi-jcore.o
obj-$(CONFIG_SPI_LM70_LLP) += spi-lm70llp.o
obj-$(CONFIG_SPI_LP8841_RTC) += spi-lp8841-rtc.o
diff --git a/drivers/spi/spi-armada-3700.c b/drivers/spi/spi-armada-3700.c
index 0314c6b9e044..6c7d7a460689 100644
--- a/drivers/spi/spi-armada-3700.c
+++ b/drivers/spi/spi-armada-3700.c
@@ -170,12 +170,12 @@ static int a3700_spi_pin_mode_set(struct a3700_spi *a3700_spi,
val &= ~(A3700_SPI_DATA_PIN0 | A3700_SPI_DATA_PIN1);
switch (pin_mode) {
- case 1:
+ case SPI_NBITS_SINGLE:
break;
- case 2:
+ case SPI_NBITS_DUAL:
val |= A3700_SPI_DATA_PIN0;
break;
- case 4:
+ case SPI_NBITS_QUAD:
val |= A3700_SPI_DATA_PIN1;
break;
default:
@@ -340,8 +340,7 @@ static irqreturn_t a3700_spi_interrupt(int irq, void *dev_id)
spireg_write(a3700_spi, A3700_SPI_INT_STAT_REG, cause);
/* Wake up the transfer */
- if (a3700_spi->wait_mask & cause)
- complete(&a3700_spi->done);
+ complete(&a3700_spi->done);
return IRQ_HANDLED;
}
@@ -421,7 +420,7 @@ static void a3700_spi_fifo_thres_set(struct a3700_spi *a3700_spi,
}
static void a3700_spi_transfer_setup(struct spi_device *spi,
- struct spi_transfer *xfer)
+ struct spi_transfer *xfer)
{
struct a3700_spi *a3700_spi;
unsigned int byte_len;
@@ -562,6 +561,7 @@ static int a3700_spi_fifo_read(struct a3700_spi *a3700_spi)
val = spireg_read(a3700_spi, A3700_SPI_DATA_IN_REG);
if (a3700_spi->buf_len >= 4) {
u32 data = le32_to_cpu(val);
+
memcpy(a3700_spi->rx_buf, &data, 4);
a3700_spi->buf_len -= 4;
@@ -901,7 +901,6 @@ static int a3700_spi_remove(struct platform_device *pdev)
struct a3700_spi *spi = spi_master_get_devdata(master);
clk_unprepare(spi->clk);
- spi_master_put(master);
return 0;
}
@@ -909,7 +908,6 @@ static int a3700_spi_remove(struct platform_device *pdev)
static struct platform_driver a3700_spi_driver = {
.driver = {
.name = DRIVER_NAME,
- .owner = THIS_MODULE,
.of_match_table = of_match_ptr(a3700_spi_dt_ids),
},
.probe = a3700_spi_probe,
diff --git a/drivers/spi/spi-ath79.c b/drivers/spi/spi-ath79.c
index f369174fbd88..b89cee11f418 100644
--- a/drivers/spi/spi-ath79.c
+++ b/drivers/spi/spi-ath79.c
@@ -78,14 +78,16 @@ static void ath79_spi_chipselect(struct spi_device *spi, int is_active)
ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, sp->ioc_base);
}
- if (spi->chip_select) {
+ if (gpio_is_valid(spi->cs_gpio)) {
/* SPI is normally active-low */
- gpio_set_value(spi->cs_gpio, cs_high);
+ gpio_set_value_cansleep(spi->cs_gpio, cs_high);
} else {
+ u32 cs_bit = AR71XX_SPI_IOC_CS(spi->chip_select);
+
if (cs_high)
- sp->ioc_base |= AR71XX_SPI_IOC_CS0;
+ sp->ioc_base |= cs_bit;
else
- sp->ioc_base &= ~AR71XX_SPI_IOC_CS0;
+ sp->ioc_base &= ~cs_bit;
ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, sp->ioc_base);
}
@@ -118,11 +120,8 @@ static int ath79_spi_setup_cs(struct spi_device *spi)
struct ath79_spi *sp = ath79_spidev_to_sp(spi);
int status;
- if (spi->chip_select && !gpio_is_valid(spi->cs_gpio))
- return -EINVAL;
-
status = 0;
- if (spi->chip_select) {
+ if (gpio_is_valid(spi->cs_gpio)) {
unsigned long flags;
flags = GPIOF_DIR_OUT;
@@ -134,10 +133,12 @@ static int ath79_spi_setup_cs(struct spi_device *spi)
status = gpio_request_one(spi->cs_gpio, flags,
dev_name(&spi->dev));
} else {
+ u32 cs_bit = AR71XX_SPI_IOC_CS(spi->chip_select);
+
if (spi->mode & SPI_CS_HIGH)
- sp->ioc_base &= ~AR71XX_SPI_IOC_CS0;
+ sp->ioc_base &= ~cs_bit;
else
- sp->ioc_base |= AR71XX_SPI_IOC_CS0;
+ sp->ioc_base |= cs_bit;
ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, sp->ioc_base);
}
@@ -147,7 +148,7 @@ static int ath79_spi_setup_cs(struct spi_device *spi)
static void ath79_spi_cleanup_cs(struct spi_device *spi)
{
- if (spi->chip_select) {
+ if (gpio_is_valid(spi->cs_gpio)) {
gpio_free(spi->cs_gpio);
}
}
diff --git a/drivers/spi/spi-bcm-qspi.c b/drivers/spi/spi-bcm-qspi.c
index d7843fd8c610..b19722ba908c 100644
--- a/drivers/spi/spi-bcm-qspi.c
+++ b/drivers/spi/spi-bcm-qspi.c
@@ -89,7 +89,7 @@
#define BSPI_BPP_MODE_SELECT_MASK BIT(8)
#define BSPI_BPP_ADDR_SELECT_MASK BIT(16)
-#define BSPI_READ_LENGTH 256
+#define BSPI_READ_LENGTH 512
/* MSPI register offsets */
#define MSPI_SPCR0_LSB 0x000
@@ -192,9 +192,11 @@ struct bcm_qspi_dev_id {
void *dev;
};
+
struct qspi_trans {
struct spi_transfer *trans;
int byte;
+ bool mspi_last_trans;
};
struct bcm_qspi {
@@ -616,6 +618,16 @@ static int bcm_qspi_setup(struct spi_device *spi)
return 0;
}
+static bool bcm_qspi_mspi_transfer_is_last(struct bcm_qspi *qspi,
+ struct qspi_trans *qt)
+{
+ if (qt->mspi_last_trans &&
+ spi_transfer_is_last(qspi->master, qt->trans))
+ return true;
+ else
+ return false;
+}
+
static int update_qspi_trans_byte_count(struct bcm_qspi *qspi,
struct qspi_trans *qt, int flags)
{
@@ -629,7 +641,6 @@ static int update_qspi_trans_byte_count(struct bcm_qspi *qspi,
if (qt->byte >= qt->trans->len) {
/* we're at the end of the spi_transfer */
-
/* in TX mode, need to pause for a delay or CS change */
if (qt->trans->delay_usecs &&
(flags & TRANS_STATUS_BREAK_DELAY))
@@ -641,7 +652,7 @@ static int update_qspi_trans_byte_count(struct bcm_qspi *qspi,
goto done;
dev_dbg(&qspi->pdev->dev, "advance msg exit\n");
- if (spi_transfer_is_last(qspi->master, qt->trans))
+ if (bcm_qspi_mspi_transfer_is_last(qspi, qt))
ret = TRANS_STATUS_BREAK_EOM;
else
ret = TRANS_STATUS_BREAK_NO_BYTES;
@@ -813,7 +824,7 @@ static int bcm_qspi_bspi_flash_read(struct spi_device *spi,
struct spi_flash_read_message *msg)
{
struct bcm_qspi *qspi = spi_master_get_devdata(spi->master);
- u32 addr = 0, len, len_words;
+ u32 addr = 0, len, rdlen, len_words;
int ret = 0;
unsigned long timeo = msecs_to_jiffies(100);
struct bcm_qspi_soc_intc *soc_intc = qspi->soc_intc;
@@ -826,7 +837,7 @@ static int bcm_qspi_bspi_flash_read(struct spi_device *spi,
bcm_qspi_write(qspi, MSPI, MSPI_WRITE_LOCK, 0);
/*
- * when using flex mode mode we need to send
+ * when using flex mode we need to send
* the upper address byte to bspi
*/
if (bcm_qspi_bspi_ver_three(qspi) == false) {
@@ -840,48 +851,127 @@ static int bcm_qspi_bspi_flash_read(struct spi_device *spi,
else
addr = msg->from & 0x00ffffff;
- /* set BSPI RAF buffer max read length */
- len = msg->len;
- if (len > BSPI_READ_LENGTH)
- len = BSPI_READ_LENGTH;
-
if (bcm_qspi_bspi_ver_three(qspi) == true)
addr = (addr + 0xc00000) & 0xffffff;
- reinit_completion(&qspi->bspi_done);
- bcm_qspi_enable_bspi(qspi);
- len_words = (len + 3) >> 2;
- qspi->bspi_rf_msg = msg;
- qspi->bspi_rf_msg_status = 0;
+ /*
+ * read into the entire buffer by breaking the reads
+ * into RAF buffer read lengths
+ */
+ len = msg->len;
qspi->bspi_rf_msg_idx = 0;
- qspi->bspi_rf_msg_len = len;
- dev_dbg(&qspi->pdev->dev, "bspi xfr addr 0x%x len 0x%x", addr, len);
- bcm_qspi_write(qspi, BSPI, BSPI_RAF_START_ADDR, addr);
- bcm_qspi_write(qspi, BSPI, BSPI_RAF_NUM_WORDS, len_words);
- bcm_qspi_write(qspi, BSPI, BSPI_RAF_WATERMARK, 0);
+ do {
+ if (len > BSPI_READ_LENGTH)
+ rdlen = BSPI_READ_LENGTH;
+ else
+ rdlen = len;
+
+ reinit_completion(&qspi->bspi_done);
+ bcm_qspi_enable_bspi(qspi);
+ len_words = (rdlen + 3) >> 2;
+ qspi->bspi_rf_msg = msg;
+ qspi->bspi_rf_msg_status = 0;
+ qspi->bspi_rf_msg_len = rdlen;
+ dev_dbg(&qspi->pdev->dev,
+ "bspi xfr addr 0x%x len 0x%x", addr, rdlen);
+ bcm_qspi_write(qspi, BSPI, BSPI_RAF_START_ADDR, addr);
+ bcm_qspi_write(qspi, BSPI, BSPI_RAF_NUM_WORDS, len_words);
+ bcm_qspi_write(qspi, BSPI, BSPI_RAF_WATERMARK, 0);
+ if (qspi->soc_intc) {
+ /*
+ * clear soc MSPI and BSPI interrupts and enable
+ * BSPI interrupts.
+ */
+ soc_intc->bcm_qspi_int_ack(soc_intc, MSPI_BSPI_DONE);
+ soc_intc->bcm_qspi_int_set(soc_intc, BSPI_DONE, true);
+ }
- if (qspi->soc_intc) {
- /*
- * clear soc MSPI and BSPI interrupts and enable
- * BSPI interrupts.
- */
- soc_intc->bcm_qspi_int_ack(soc_intc, MSPI_BSPI_DONE);
- soc_intc->bcm_qspi_int_set(soc_intc, BSPI_DONE, true);
+ /* Must flush previous writes before starting BSPI operation */
+ mb();
+ bcm_qspi_bspi_lr_start(qspi);
+ if (!wait_for_completion_timeout(&qspi->bspi_done, timeo)) {
+ dev_err(&qspi->pdev->dev, "timeout waiting for BSPI\n");
+ ret = -ETIMEDOUT;
+ break;
+ }
+
+ /* set msg return length */
+ msg->retlen += rdlen;
+ addr += rdlen;
+ len -= rdlen;
+ } while (len);
+
+ return ret;
+}
+
+static int bcm_qspi_transfer_one(struct spi_master *master,
+ struct spi_device *spi,
+ struct spi_transfer *trans)
+{
+ struct bcm_qspi *qspi = spi_master_get_devdata(master);
+ int slots;
+ unsigned long timeo = msecs_to_jiffies(100);
+
+ bcm_qspi_chip_select(qspi, spi->chip_select);
+ qspi->trans_pos.trans = trans;
+ qspi->trans_pos.byte = 0;
+
+ while (qspi->trans_pos.byte < trans->len) {
+ reinit_completion(&qspi->mspi_done);
+
+ slots = write_to_hw(qspi, spi);
+ if (!wait_for_completion_timeout(&qspi->mspi_done, timeo)) {
+ dev_err(&qspi->pdev->dev, "timeout waiting for MSPI\n");
+ return -ETIMEDOUT;
+ }
+
+ read_from_hw(qspi, slots);
}
- /* Must flush previous writes before starting BSPI operation */
- mb();
+ return 0;
+}
- bcm_qspi_bspi_lr_start(qspi);
- if (!wait_for_completion_timeout(&qspi->bspi_done, timeo)) {
- dev_err(&qspi->pdev->dev, "timeout waiting for BSPI\n");
- ret = -ETIMEDOUT;
- } else {
- /* set the return length for the caller */
- msg->retlen = len;
+static int bcm_qspi_mspi_flash_read(struct spi_device *spi,
+ struct spi_flash_read_message *msg)
+{
+ struct bcm_qspi *qspi = spi_master_get_devdata(spi->master);
+ struct spi_transfer t[2];
+ u8 cmd[6];
+ int ret;
+
+ memset(cmd, 0, sizeof(cmd));
+ memset(t, 0, sizeof(t));
+
+ /* tx */
+ /* opcode is in cmd[0] */
+ cmd[0] = msg->read_opcode;
+ cmd[1] = msg->from >> (msg->addr_width * 8 - 8);
+ cmd[2] = msg->from >> (msg->addr_width * 8 - 16);
+ cmd[3] = msg->from >> (msg->addr_width * 8 - 24);
+ cmd[4] = msg->from >> (msg->addr_width * 8 - 32);
+ t[0].tx_buf = cmd;
+ t[0].len = msg->addr_width + msg->dummy_bytes + 1;
+ t[0].bits_per_word = spi->bits_per_word;
+ t[0].tx_nbits = msg->opcode_nbits;
+ /* lets mspi know that this is not last transfer */
+ qspi->trans_pos.mspi_last_trans = false;
+ ret = bcm_qspi_transfer_one(spi->master, spi, &t[0]);
+
+ /* rx */
+ qspi->trans_pos.mspi_last_trans = true;
+ if (!ret) {
+ /* rx */
+ t[1].rx_buf = msg->buf;
+ t[1].len = msg->len;
+ t[1].rx_nbits = msg->data_nbits;
+ t[1].bits_per_word = spi->bits_per_word;
+ ret = bcm_qspi_transfer_one(spi->master, spi, &t[1]);
}
+ if (!ret)
+ msg->retlen = msg->len;
+
return ret;
}
@@ -918,8 +1008,7 @@ static int bcm_qspi_flash_read(struct spi_device *spi,
mspi_read = true;
if (mspi_read)
- /* this will make the m25p80 read to fallback to mspi read */
- return -EAGAIN;
+ return bcm_qspi_mspi_flash_read(spi, msg);
io_width = msg->data_nbits ? msg->data_nbits : SPI_NBITS_SINGLE;
addrlen = msg->addr_width;
@@ -931,33 +1020,6 @@ static int bcm_qspi_flash_read(struct spi_device *spi,
return ret;
}
-static int bcm_qspi_transfer_one(struct spi_master *master,
- struct spi_device *spi,
- struct spi_transfer *trans)
-{
- struct bcm_qspi *qspi = spi_master_get_devdata(master);
- int slots;
- unsigned long timeo = msecs_to_jiffies(100);
-
- bcm_qspi_chip_select(qspi, spi->chip_select);
- qspi->trans_pos.trans = trans;
- qspi->trans_pos.byte = 0;
-
- while (qspi->trans_pos.byte < trans->len) {
- reinit_completion(&qspi->mspi_done);
-
- slots = write_to_hw(qspi, spi);
- if (!wait_for_completion_timeout(&qspi->mspi_done, timeo)) {
- dev_err(&qspi->pdev->dev, "timeout waiting for MSPI\n");
- return -ETIMEDOUT;
- }
-
- read_from_hw(qspi, slots);
- }
-
- return 0;
-}
-
static void bcm_qspi_cleanup(struct spi_device *spi)
{
struct bcm_qspi_parms *xp = spi_get_ctldata(spi);
@@ -1187,6 +1249,7 @@ int bcm_qspi_probe(struct platform_device *pdev,
qspi->pdev = pdev;
qspi->trans_pos.trans = NULL;
qspi->trans_pos.byte = 0;
+ qspi->trans_pos.mspi_last_trans = true;
qspi->master = master;
master->bus_num = -1;
@@ -1345,7 +1408,6 @@ int bcm_qspi_remove(struct platform_device *pdev)
{
struct bcm_qspi *qspi = platform_get_drvdata(pdev);
- platform_set_drvdata(pdev, NULL);
bcm_qspi_hw_uninit(qspi);
clk_disable_unprepare(qspi->clk);
kfree(qspi->dev_ids);
diff --git a/drivers/spi/spi-bcm53xx.c b/drivers/spi/spi-bcm53xx.c
index afb51699dbb5..6e409eabe1c9 100644
--- a/drivers/spi/spi-bcm53xx.c
+++ b/drivers/spi/spi-bcm53xx.c
@@ -1,3 +1,11 @@
+/*
+ * Copyright (C) 2014-2016 Rafał Miłecki <rafal@milecki.pl>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/kernel.h>
@@ -275,10 +283,6 @@ static int bcm53xxspi_flash_read(struct spi_device *spi,
* BCMA
**************************************************/
-static struct spi_board_info bcm53xx_info = {
- .modalias = "bcm53xxspiflash",
-};
-
static const struct bcma_device_id bcm53xxspi_bcma_tbl[] = {
BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_NS_QSPI, BCMA_ANY_REV, BCMA_ANY_CLASS),
{},
@@ -311,6 +315,7 @@ static int bcm53xxspi_bcma_probe(struct bcma_device *core)
b53spi->bspi = true;
bcm53xxspi_disable_bspi(b53spi);
+ master->dev.of_node = dev->of_node;
master->transfer_one = bcm53xxspi_transfer_one;
if (b53spi->mmio_base)
master->spi_flash_read = bcm53xxspi_flash_read;
@@ -324,9 +329,6 @@ static int bcm53xxspi_bcma_probe(struct bcma_device *core)
return err;
}
- /* Broadcom SoCs (at least with the CC rev 42) use SPI for flash only */
- spi_new_device(master, &bcm53xx_info);
-
return 0;
}
@@ -361,4 +363,4 @@ module_exit(bcm53xxspi_module_exit);
MODULE_DESCRIPTION("Broadcom BCM53xx SPI Controller driver");
MODULE_AUTHOR("Rafał Miłecki <zajec5@gmail.com>");
-MODULE_LICENSE("GPL");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/spi/spi-dw.c b/drivers/spi/spi-dw.c
index 054012f87567..b217c22ff72f 100644
--- a/drivers/spi/spi-dw.c
+++ b/drivers/spi/spi-dw.c
@@ -107,9 +107,9 @@ static const struct file_operations dw_spi_regs_ops = {
static int dw_spi_debugfs_init(struct dw_spi *dws)
{
- char name[128];
+ char name[32];
- snprintf(name, 128, "dw_spi-%s", dev_name(&dws->master->dev));
+ snprintf(name, 32, "dw_spi%d", dws->master->bus_num);
dws->debugfs = debugfs_create_dir(name, NULL);
if (!dws->debugfs)
return -ENOMEM;
@@ -486,9 +486,9 @@ int dw_spi_add_host(struct device *dev, struct dw_spi *dws)
dws->type = SSI_MOTO_SPI;
dws->dma_inited = 0;
dws->dma_addr = (dma_addr_t)(dws->paddr + DW_SPI_DR);
- snprintf(dws->name, sizeof(dws->name), "dw_spi%d", dws->bus_num);
- ret = request_irq(dws->irq, dw_spi_irq, IRQF_SHARED, dws->name, master);
+ ret = request_irq(dws->irq, dw_spi_irq, IRQF_SHARED, dev_name(dev),
+ master);
if (ret < 0) {
dev_err(dev, "can not get IRQ\n");
goto err_free_master;
diff --git a/drivers/spi/spi-dw.h b/drivers/spi/spi-dw.h
index c21ca02f8ec5..da5eab62df34 100644
--- a/drivers/spi/spi-dw.h
+++ b/drivers/spi/spi-dw.h
@@ -101,7 +101,6 @@ struct dw_spi_dma_ops {
struct dw_spi {
struct spi_master *master;
enum dw_ssi_type type;
- char name[16];
void __iomem *regs;
unsigned long paddr;
diff --git a/drivers/spi/spi-ep93xx.c b/drivers/spi/spi-ep93xx.c
index 17a6387e20b5..b5d766064b7b 100644
--- a/drivers/spi/spi-ep93xx.c
+++ b/drivers/spi/spi-ep93xx.c
@@ -28,6 +28,7 @@
#include <linux/platform_device.h>
#include <linux/sched.h>
#include <linux/scatterlist.h>
+#include <linux/gpio.h>
#include <linux/spi/spi.h>
#include <linux/platform_data/dma-ep93xx.h>
@@ -107,16 +108,6 @@ struct ep93xx_spi {
void *zeropage;
};
-/**
- * struct ep93xx_spi_chip - SPI device hardware settings
- * @spi: back pointer to the SPI device
- * @ops: private chip operations
- */
-struct ep93xx_spi_chip {
- const struct spi_device *spi;
- struct ep93xx_spi_chip_ops *ops;
-};
-
/* converts bits per word to CR0.DSS value */
#define bits_per_word_to_dss(bpw) ((bpw) - 1)
@@ -229,104 +220,36 @@ static int ep93xx_spi_calc_divisors(const struct ep93xx_spi *espi,
return -EINVAL;
}
-static void ep93xx_spi_cs_control(struct spi_device *spi, bool control)
-{
- struct ep93xx_spi_chip *chip = spi_get_ctldata(spi);
- int value = (spi->mode & SPI_CS_HIGH) ? control : !control;
-
- if (chip->ops && chip->ops->cs_control)
- chip->ops->cs_control(spi, value);
-}
-
-/**
- * ep93xx_spi_setup() - setup an SPI device
- * @spi: SPI device to setup
- *
- * This function sets up SPI device mode, speed etc. Can be called multiple
- * times for a single device. Returns %0 in case of success, negative error in
- * case of failure. When this function returns success, the device is
- * deselected.
- */
-static int ep93xx_spi_setup(struct spi_device *spi)
+static void ep93xx_spi_cs_control(struct spi_device *spi, bool enable)
{
- struct ep93xx_spi *espi = spi_master_get_devdata(spi->master);
- struct ep93xx_spi_chip *chip;
+ if (spi->mode & SPI_CS_HIGH)
+ enable = !enable;
- chip = spi_get_ctldata(spi);
- if (!chip) {
- dev_dbg(&espi->pdev->dev, "initial setup for %s\n",
- spi->modalias);
-
- chip = kzalloc(sizeof(*chip), GFP_KERNEL);
- if (!chip)
- return -ENOMEM;
-
- chip->spi = spi;
- chip->ops = spi->controller_data;
-
- if (chip->ops && chip->ops->setup) {
- int ret = chip->ops->setup(spi);
-
- if (ret) {
- kfree(chip);
- return ret;
- }
- }
-
- spi_set_ctldata(spi, chip);
- }
-
- ep93xx_spi_cs_control(spi, false);
- return 0;
+ if (gpio_is_valid(spi->cs_gpio))
+ gpio_set_value(spi->cs_gpio, !enable);
}
-/**
- * ep93xx_spi_cleanup() - cleans up master controller specific state
- * @spi: SPI device to cleanup
- *
- * This function releases master controller specific state for given @spi
- * device.
- */
-static void ep93xx_spi_cleanup(struct spi_device *spi)
-{
- struct ep93xx_spi_chip *chip;
-
- chip = spi_get_ctldata(spi);
- if (chip) {
- if (chip->ops && chip->ops->cleanup)
- chip->ops->cleanup(spi);
- spi_set_ctldata(spi, NULL);
- kfree(chip);
- }
-}
-
-/**
- * ep93xx_spi_chip_setup() - configures hardware according to given @chip
- * @espi: ep93xx SPI controller struct
- * @chip: chip specific settings
- * @speed_hz: transfer speed
- * @bits_per_word: transfer bits_per_word
- */
static int ep93xx_spi_chip_setup(const struct ep93xx_spi *espi,
- const struct ep93xx_spi_chip *chip,
- u32 speed_hz, u8 bits_per_word)
+ struct spi_device *spi,
+ struct spi_transfer *xfer)
{
- u8 dss = bits_per_word_to_dss(bits_per_word);
+ u8 dss = bits_per_word_to_dss(xfer->bits_per_word);
u8 div_cpsr = 0;
u8 div_scr = 0;
u16 cr0;
int err;
- err = ep93xx_spi_calc_divisors(espi, speed_hz, &div_cpsr, &div_scr);
+ err = ep93xx_spi_calc_divisors(espi, xfer->speed_hz,
+ &div_cpsr, &div_scr);
if (err)
return err;
cr0 = div_scr << SSPCR0_SCR_SHIFT;
- cr0 |= (chip->spi->mode & (SPI_CPHA|SPI_CPOL)) << SSPCR0_MODE_SHIFT;
+ cr0 |= (spi->mode & (SPI_CPHA | SPI_CPOL)) << SSPCR0_MODE_SHIFT;
cr0 |= dss;
dev_dbg(&espi->pdev->dev, "setup: mode %d, cpsr %d, scr %d, dss %d\n",
- chip->spi->mode, div_cpsr, div_scr, dss);
+ spi->mode, div_cpsr, div_scr, dss);
dev_dbg(&espi->pdev->dev, "setup: cr0 %#x\n", cr0);
ep93xx_spi_write_u8(espi, SSPCPSR, div_cpsr);
@@ -603,12 +526,11 @@ static void ep93xx_spi_process_transfer(struct ep93xx_spi *espi,
struct spi_message *msg,
struct spi_transfer *t)
{
- struct ep93xx_spi_chip *chip = spi_get_ctldata(msg->spi);
int err;
msg->state = t;
- err = ep93xx_spi_chip_setup(espi, chip, t->speed_hz, t->bits_per_word);
+ err = ep93xx_spi_chip_setup(espi, msg->spi, t);
if (err) {
dev_err(&espi->pdev->dev,
"failed to setup chip for transfer\n");
@@ -863,8 +785,13 @@ static int ep93xx_spi_probe(struct platform_device *pdev)
struct resource *res;
int irq;
int error;
+ int i;
info = dev_get_platdata(&pdev->dev);
+ if (!info) {
+ dev_err(&pdev->dev, "missing platform data\n");
+ return -EINVAL;
+ }
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
@@ -882,14 +809,36 @@ static int ep93xx_spi_probe(struct platform_device *pdev)
if (!master)
return -ENOMEM;
- master->setup = ep93xx_spi_setup;
master->transfer_one_message = ep93xx_spi_transfer_one_message;
- master->cleanup = ep93xx_spi_cleanup;
master->bus_num = pdev->id;
- master->num_chipselect = info->num_chipselect;
master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
master->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 16);
+ master->num_chipselect = info->num_chipselect;
+ master->cs_gpios = devm_kzalloc(&master->dev,
+ sizeof(int) * master->num_chipselect,
+ GFP_KERNEL);
+ if (!master->cs_gpios) {
+ error = -ENOMEM;
+ goto fail_release_master;
+ }
+
+ for (i = 0; i < master->num_chipselect; i++) {
+ master->cs_gpios[i] = info->chipselect[i];
+
+ if (!gpio_is_valid(master->cs_gpios[i]))
+ continue;
+
+ error = devm_gpio_request_one(&pdev->dev, master->cs_gpios[i],
+ GPIOF_OUT_INIT_HIGH,
+ "ep93xx-spi");
+ if (error) {
+ dev_err(&pdev->dev, "could not request cs gpio %d\n",
+ master->cs_gpios[i]);
+ goto fail_release_master;
+ }
+ }
+
platform_set_drvdata(pdev, master);
espi = spi_master_get_devdata(master);
diff --git a/drivers/spi/spi-fsl-lpspi.c b/drivers/spi/spi-fsl-lpspi.c
index 52551f6d0c7d..cb3c73007ca1 100644
--- a/drivers/spi/spi-fsl-lpspi.c
+++ b/drivers/spi/spi-fsl-lpspi.c
@@ -366,7 +366,7 @@ static int fsl_lpspi_transfer_one_msg(struct spi_master *master,
struct spi_transfer *xfer;
bool is_first_xfer = true;
u32 temp;
- int ret;
+ int ret = 0;
msg->status = 0;
msg->actual_length = 0;
@@ -512,9 +512,9 @@ static int fsl_lpspi_remove(struct platform_device *pdev)
static struct platform_driver fsl_lpspi_driver = {
.driver = {
- .name = DRIVER_NAME,
- .of_match_table = fsl_lpspi_dt_ids,
- },
+ .name = DRIVER_NAME,
+ .of_match_table = fsl_lpspi_dt_ids,
+ },
.probe = fsl_lpspi_probe,
.remove = fsl_lpspi_remove,
};
diff --git a/drivers/spi/spi-fsl-spi.c b/drivers/spi/spi-fsl-spi.c
index 8b290d9d7935..0fc3452652ae 100644
--- a/drivers/spi/spi-fsl-spi.c
+++ b/drivers/spi/spi-fsl-spi.c
@@ -267,10 +267,9 @@ static int fsl_spi_setup_transfer(struct spi_device *spi,
if ((mpc8xxx_spi->spibrg / hz) > 64) {
cs->hw_mode |= SPMODE_DIV16;
pm = (mpc8xxx_spi->spibrg - 1) / (hz * 64) + 1;
-
- WARN_ONCE(pm > 16, "%s: Requested speed is too low: %d Hz. "
- "Will use %d Hz instead.\n", dev_name(&spi->dev),
- hz, mpc8xxx_spi->spibrg / 1024);
+ WARN_ONCE(pm > 16,
+ "%s: Requested speed is too low: %d Hz. Will use %d Hz instead.\n",
+ dev_name(&spi->dev), hz, mpc8xxx_spi->spibrg / 1024);
if (pm > 16)
pm = 16;
} else {
@@ -727,12 +726,13 @@ static int of_fsl_spi_get_chipselects(struct device *dev)
return 0;
}
- pinfo->gpios = kmalloc(ngpios * sizeof(*pinfo->gpios), GFP_KERNEL);
+ pinfo->gpios = kmalloc_array(ngpios, sizeof(*pinfo->gpios),
+ GFP_KERNEL);
if (!pinfo->gpios)
return -ENOMEM;
memset(pinfo->gpios, -1, ngpios * sizeof(*pinfo->gpios));
- pinfo->alow_flags = kzalloc(ngpios * sizeof(*pinfo->alow_flags),
+ pinfo->alow_flags = kcalloc(ngpios, sizeof(*pinfo->alow_flags),
GFP_KERNEL);
if (!pinfo->alow_flags) {
ret = -ENOMEM;
@@ -762,8 +762,9 @@ static int of_fsl_spi_get_chipselects(struct device *dev)
ret = gpio_direction_output(pinfo->gpios[i],
pinfo->alow_flags[i]);
if (ret) {
- dev_err(dev, "can't set output direction for gpio "
- "#%d: %d\n", i, ret);
+ dev_err(dev,
+ "can't set output direction for gpio #%d: %d\n",
+ i, ret);
goto err_loop;
}
}
diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index 32ced64a5bb9..9a7c62f471dc 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -211,7 +211,7 @@ static bool spi_imx_can_dma(struct spi_master *master, struct spi_device *spi,
struct spi_transfer *transfer)
{
struct spi_imx_data *spi_imx = spi_master_get_devdata(master);
- unsigned int bpw;
+ unsigned int bpw, i;
if (!master->dma_rx)
return false;
@@ -228,12 +228,16 @@ static bool spi_imx_can_dma(struct spi_master *master, struct spi_device *spi,
if (bpw != 1 && bpw != 2 && bpw != 4)
return false;
- if (transfer->len < spi_imx->wml * bpw)
- return false;
+ for (i = spi_imx_get_fifosize(spi_imx) / 2; i > 0; i--) {
+ if (!(transfer->len % (i * bpw)))
+ break;
+ }
- if (transfer->len % (spi_imx->wml * bpw))
+ if (i == 0)
return false;
+ spi_imx->wml = i;
+
return true;
}
@@ -837,10 +841,6 @@ static int spi_imx_dma_configure(struct spi_master *master,
struct dma_slave_config rx = {}, tx = {};
struct spi_imx_data *spi_imx = spi_master_get_devdata(master);
- if (bytes_per_word == spi_imx->bytes_per_word)
- /* Same as last time */
- return 0;
-
switch (bytes_per_word) {
case 4:
buswidth = DMA_SLAVE_BUSWIDTH_4_BYTES;
diff --git a/drivers/spi/spi-lantiq-ssc.c b/drivers/spi/spi-lantiq-ssc.c
new file mode 100644
index 000000000000..8a626f7fccea
--- /dev/null
+++ b/drivers/spi/spi-lantiq-ssc.c
@@ -0,0 +1,983 @@
+/*
+ * Copyright (C) 2011-2015 Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+ * Copyright (C) 2016 Hauke Mehrtens <hauke@hauke-m.de>
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/completion.h>
+#include <linux/spinlock.h>
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/pm_runtime.h>
+#include <linux/spi/spi.h>
+
+#ifdef CONFIG_LANTIQ
+#include <lantiq_soc.h>
+#endif
+
+#define SPI_RX_IRQ_NAME "spi_rx"
+#define SPI_TX_IRQ_NAME "spi_tx"
+#define SPI_ERR_IRQ_NAME "spi_err"
+#define SPI_FRM_IRQ_NAME "spi_frm"
+
+#define SPI_CLC 0x00
+#define SPI_PISEL 0x04
+#define SPI_ID 0x08
+#define SPI_CON 0x10
+#define SPI_STAT 0x14
+#define SPI_WHBSTATE 0x18
+#define SPI_TB 0x20
+#define SPI_RB 0x24
+#define SPI_RXFCON 0x30
+#define SPI_TXFCON 0x34
+#define SPI_FSTAT 0x38
+#define SPI_BRT 0x40
+#define SPI_BRSTAT 0x44
+#define SPI_SFCON 0x60
+#define SPI_SFSTAT 0x64
+#define SPI_GPOCON 0x70
+#define SPI_GPOSTAT 0x74
+#define SPI_FPGO 0x78
+#define SPI_RXREQ 0x80
+#define SPI_RXCNT 0x84
+#define SPI_DMACON 0xec
+#define SPI_IRNEN 0xf4
+#define SPI_IRNICR 0xf8
+#define SPI_IRNCR 0xfc
+
+#define SPI_CLC_SMC_S 16 /* Clock divider for sleep mode */
+#define SPI_CLC_SMC_M (0xFF << SPI_CLC_SMC_S)
+#define SPI_CLC_RMC_S 8 /* Clock divider for normal run mode */
+#define SPI_CLC_RMC_M (0xFF << SPI_CLC_RMC_S)
+#define SPI_CLC_DISS BIT(1) /* Disable status bit */
+#define SPI_CLC_DISR BIT(0) /* Disable request bit */
+
+#define SPI_ID_TXFS_S 24 /* Implemented TX FIFO size */
+#define SPI_ID_TXFS_M (0x3F << SPI_ID_TXFS_S)
+#define SPI_ID_RXFS_S 16 /* Implemented RX FIFO size */
+#define SPI_ID_RXFS_M (0x3F << SPI_ID_RXFS_S)
+#define SPI_ID_MOD_S 8 /* Module ID */
+#define SPI_ID_MOD_M (0xff << SPI_ID_MOD_S)
+#define SPI_ID_CFG_S 5 /* DMA interface support */
+#define SPI_ID_CFG_M (1 << SPI_ID_CFG_S)
+#define SPI_ID_REV_M 0x1F /* Hardware revision number */
+
+#define SPI_CON_BM_S 16 /* Data width selection */
+#define SPI_CON_BM_M (0x1F << SPI_CON_BM_S)
+#define SPI_CON_EM BIT(24) /* Echo mode */
+#define SPI_CON_IDLE BIT(23) /* Idle bit value */
+#define SPI_CON_ENBV BIT(22) /* Enable byte valid control */
+#define SPI_CON_RUEN BIT(12) /* Receive underflow error enable */
+#define SPI_CON_TUEN BIT(11) /* Transmit underflow error enable */
+#define SPI_CON_AEN BIT(10) /* Abort error enable */
+#define SPI_CON_REN BIT(9) /* Receive overflow error enable */
+#define SPI_CON_TEN BIT(8) /* Transmit overflow error enable */
+#define SPI_CON_LB BIT(7) /* Loopback control */
+#define SPI_CON_PO BIT(6) /* Clock polarity control */
+#define SPI_CON_PH BIT(5) /* Clock phase control */
+#define SPI_CON_HB BIT(4) /* Heading control */
+#define SPI_CON_RXOFF BIT(1) /* Switch receiver off */
+#define SPI_CON_TXOFF BIT(0) /* Switch transmitter off */
+
+#define SPI_STAT_RXBV_S 28
+#define SPI_STAT_RXBV_M (0x7 << SPI_STAT_RXBV_S)
+#define SPI_STAT_BSY BIT(13) /* Busy flag */
+#define SPI_STAT_RUE BIT(12) /* Receive underflow error flag */
+#define SPI_STAT_TUE BIT(11) /* Transmit underflow error flag */
+#define SPI_STAT_AE BIT(10) /* Abort error flag */
+#define SPI_STAT_RE BIT(9) /* Receive error flag */
+#define SPI_STAT_TE BIT(8) /* Transmit error flag */
+#define SPI_STAT_ME BIT(7) /* Mode error flag */
+#define SPI_STAT_MS BIT(1) /* Master/slave select bit */
+#define SPI_STAT_EN BIT(0) /* Enable bit */
+#define SPI_STAT_ERRORS (SPI_STAT_ME | SPI_STAT_TE | SPI_STAT_RE | \
+ SPI_STAT_AE | SPI_STAT_TUE | SPI_STAT_RUE)
+
+#define SPI_WHBSTATE_SETTUE BIT(15) /* Set transmit underflow error flag */
+#define SPI_WHBSTATE_SETAE BIT(14) /* Set abort error flag */
+#define SPI_WHBSTATE_SETRE BIT(13) /* Set receive error flag */
+#define SPI_WHBSTATE_SETTE BIT(12) /* Set transmit error flag */
+#define SPI_WHBSTATE_CLRTUE BIT(11) /* Clear transmit underflow error flag */
+#define SPI_WHBSTATE_CLRAE BIT(10) /* Clear abort error flag */
+#define SPI_WHBSTATE_CLRRE BIT(9) /* Clear receive error flag */
+#define SPI_WHBSTATE_CLRTE BIT(8) /* Clear transmit error flag */
+#define SPI_WHBSTATE_SETME BIT(7) /* Set mode error flag */
+#define SPI_WHBSTATE_CLRME BIT(6) /* Clear mode error flag */
+#define SPI_WHBSTATE_SETRUE BIT(5) /* Set receive underflow error flag */
+#define SPI_WHBSTATE_CLRRUE BIT(4) /* Clear receive underflow error flag */
+#define SPI_WHBSTATE_SETMS BIT(3) /* Set master select bit */
+#define SPI_WHBSTATE_CLRMS BIT(2) /* Clear master select bit */
+#define SPI_WHBSTATE_SETEN BIT(1) /* Set enable bit (operational mode) */
+#define SPI_WHBSTATE_CLREN BIT(0) /* Clear enable bit (config mode */
+#define SPI_WHBSTATE_CLR_ERRORS (SPI_WHBSTATE_CLRRUE | SPI_WHBSTATE_CLRME | \
+ SPI_WHBSTATE_CLRTE | SPI_WHBSTATE_CLRRE | \
+ SPI_WHBSTATE_CLRAE | SPI_WHBSTATE_CLRTUE)
+
+#define SPI_RXFCON_RXFITL_S 8 /* FIFO interrupt trigger level */
+#define SPI_RXFCON_RXFITL_M (0x3F << SPI_RXFCON_RXFITL_S)
+#define SPI_RXFCON_RXFLU BIT(1) /* FIFO flush */
+#define SPI_RXFCON_RXFEN BIT(0) /* FIFO enable */
+
+#define SPI_TXFCON_TXFITL_S 8 /* FIFO interrupt trigger level */
+#define SPI_TXFCON_TXFITL_M (0x3F << SPI_TXFCON_TXFITL_S)
+#define SPI_TXFCON_TXFLU BIT(1) /* FIFO flush */
+#define SPI_TXFCON_TXFEN BIT(0) /* FIFO enable */
+
+#define SPI_FSTAT_RXFFL_S 0
+#define SPI_FSTAT_RXFFL_M (0x3f << SPI_FSTAT_RXFFL_S)
+#define SPI_FSTAT_TXFFL_S 8
+#define SPI_FSTAT_TXFFL_M (0x3f << SPI_FSTAT_TXFFL_S)
+
+#define SPI_GPOCON_ISCSBN_S 8
+#define SPI_GPOCON_INVOUTN_S 0
+
+#define SPI_FGPO_SETOUTN_S 8
+#define SPI_FGPO_CLROUTN_S 0
+
+#define SPI_RXREQ_RXCNT_M 0xFFFF /* Receive count value */
+#define SPI_RXCNT_TODO_M 0xFFFF /* Recevie to-do value */
+
+#define SPI_IRNEN_TFI BIT(4) /* TX finished interrupt */
+#define SPI_IRNEN_F BIT(3) /* Frame end interrupt request */
+#define SPI_IRNEN_E BIT(2) /* Error end interrupt request */
+#define SPI_IRNEN_T_XWAY BIT(1) /* Transmit end interrupt request */
+#define SPI_IRNEN_R_XWAY BIT(0) /* Receive end interrupt request */
+#define SPI_IRNEN_R_XRX BIT(1) /* Transmit end interrupt request */
+#define SPI_IRNEN_T_XRX BIT(0) /* Receive end interrupt request */
+#define SPI_IRNEN_ALL 0x1F
+
+struct lantiq_ssc_hwcfg {
+ unsigned int irnen_r;
+ unsigned int irnen_t;
+};
+
+struct lantiq_ssc_spi {
+ struct spi_master *master;
+ struct device *dev;
+ void __iomem *regbase;
+ struct clk *spi_clk;
+ struct clk *fpi_clk;
+ const struct lantiq_ssc_hwcfg *hwcfg;
+
+ spinlock_t lock;
+ struct workqueue_struct *wq;
+ struct work_struct work;
+
+ const u8 *tx;
+ u8 *rx;
+ unsigned int tx_todo;
+ unsigned int rx_todo;
+ unsigned int bits_per_word;
+ unsigned int speed_hz;
+ unsigned int tx_fifo_size;
+ unsigned int rx_fifo_size;
+ unsigned int base_cs;
+};
+
+static u32 lantiq_ssc_readl(const struct lantiq_ssc_spi *spi, u32 reg)
+{
+ return __raw_readl(spi->regbase + reg);
+}
+
+static void lantiq_ssc_writel(const struct lantiq_ssc_spi *spi, u32 val,
+ u32 reg)
+{
+ __raw_writel(val, spi->regbase + reg);
+}
+
+static void lantiq_ssc_maskl(const struct lantiq_ssc_spi *spi, u32 clr,
+ u32 set, u32 reg)
+{
+ u32 val = __raw_readl(spi->regbase + reg);
+
+ val &= ~clr;
+ val |= set;
+ __raw_writel(val, spi->regbase + reg);
+}
+
+static unsigned int tx_fifo_level(const struct lantiq_ssc_spi *spi)
+{
+ u32 fstat = lantiq_ssc_readl(spi, SPI_FSTAT);
+
+ return (fstat & SPI_FSTAT_TXFFL_M) >> SPI_FSTAT_TXFFL_S;
+}
+
+static unsigned int rx_fifo_level(const struct lantiq_ssc_spi *spi)
+{
+ u32 fstat = lantiq_ssc_readl(spi, SPI_FSTAT);
+
+ return fstat & SPI_FSTAT_RXFFL_M;
+}
+
+static unsigned int tx_fifo_free(const struct lantiq_ssc_spi *spi)
+{
+ return spi->tx_fifo_size - tx_fifo_level(spi);
+}
+
+static void rx_fifo_reset(const struct lantiq_ssc_spi *spi)
+{
+ u32 val = spi->rx_fifo_size << SPI_RXFCON_RXFITL_S;
+
+ val |= SPI_RXFCON_RXFEN | SPI_RXFCON_RXFLU;
+ lantiq_ssc_writel(spi, val, SPI_RXFCON);
+}
+
+static void tx_fifo_reset(const struct lantiq_ssc_spi *spi)
+{
+ u32 val = 1 << SPI_TXFCON_TXFITL_S;
+
+ val |= SPI_TXFCON_TXFEN | SPI_TXFCON_TXFLU;
+ lantiq_ssc_writel(spi, val, SPI_TXFCON);
+}
+
+static void rx_fifo_flush(const struct lantiq_ssc_spi *spi)
+{
+ lantiq_ssc_maskl(spi, 0, SPI_RXFCON_RXFLU, SPI_RXFCON);
+}
+
+static void tx_fifo_flush(const struct lantiq_ssc_spi *spi)
+{
+ lantiq_ssc_maskl(spi, 0, SPI_TXFCON_TXFLU, SPI_TXFCON);
+}
+
+static void hw_enter_config_mode(const struct lantiq_ssc_spi *spi)
+{
+ lantiq_ssc_writel(spi, SPI_WHBSTATE_CLREN, SPI_WHBSTATE);
+}
+
+static void hw_enter_active_mode(const struct lantiq_ssc_spi *spi)
+{
+ lantiq_ssc_writel(spi, SPI_WHBSTATE_SETEN, SPI_WHBSTATE);
+}
+
+static void hw_setup_speed_hz(const struct lantiq_ssc_spi *spi,
+ unsigned int max_speed_hz)
+{
+ u32 spi_clk, brt;
+
+ /*
+ * SPI module clock is derived from FPI bus clock dependent on
+ * divider value in CLC.RMS which is always set to 1.
+ *
+ * f_SPI
+ * baudrate = --------------
+ * 2 * (BR + 1)
+ */
+ spi_clk = clk_get_rate(spi->fpi_clk) / 2;
+
+ if (max_speed_hz > spi_clk)
+ brt = 0;
+ else
+ brt = spi_clk / max_speed_hz - 1;
+
+ if (brt > 0xFFFF)
+ brt = 0xFFFF;
+
+ dev_dbg(spi->dev, "spi_clk %u, max_speed_hz %u, brt %u\n",
+ spi_clk, max_speed_hz, brt);
+
+ lantiq_ssc_writel(spi, brt, SPI_BRT);
+}
+
+static void hw_setup_bits_per_word(const struct lantiq_ssc_spi *spi,
+ unsigned int bits_per_word)
+{
+ u32 bm;
+
+ /* CON.BM value = bits_per_word - 1 */
+ bm = (bits_per_word - 1) << SPI_CON_BM_S;
+
+ lantiq_ssc_maskl(spi, SPI_CON_BM_M, bm, SPI_CON);
+}
+
+static void hw_setup_clock_mode(const struct lantiq_ssc_spi *spi,
+ unsigned int mode)
+{
+ u32 con_set = 0, con_clr = 0;
+
+ /*
+ * SPI mode mapping in CON register:
+ * Mode CPOL CPHA CON.PO CON.PH
+ * 0 0 0 0 1
+ * 1 0 1 0 0
+ * 2 1 0 1 1
+ * 3 1 1 1 0
+ */
+ if (mode & SPI_CPHA)
+ con_clr |= SPI_CON_PH;
+ else
+ con_set |= SPI_CON_PH;
+
+ if (mode & SPI_CPOL)
+ con_set |= SPI_CON_PO | SPI_CON_IDLE;
+ else
+ con_clr |= SPI_CON_PO | SPI_CON_IDLE;
+
+ /* Set heading control */
+ if (mode & SPI_LSB_FIRST)
+ con_clr |= SPI_CON_HB;
+ else
+ con_set |= SPI_CON_HB;
+
+ /* Set loopback mode */
+ if (mode & SPI_LOOP)
+ con_set |= SPI_CON_LB;
+ else
+ con_clr |= SPI_CON_LB;
+
+ lantiq_ssc_maskl(spi, con_clr, con_set, SPI_CON);
+}
+
+static void lantiq_ssc_hw_init(const struct lantiq_ssc_spi *spi)
+{
+ const struct lantiq_ssc_hwcfg *hwcfg = spi->hwcfg;
+
+ /*
+ * Set clock divider for run mode to 1 to
+ * run at same frequency as FPI bus
+ */
+ lantiq_ssc_writel(spi, 1 << SPI_CLC_RMC_S, SPI_CLC);
+
+ /* Put controller into config mode */
+ hw_enter_config_mode(spi);
+
+ /* Clear error flags */
+ lantiq_ssc_maskl(spi, 0, SPI_WHBSTATE_CLR_ERRORS, SPI_WHBSTATE);
+
+ /* Enable error checking, disable TX/RX */
+ lantiq_ssc_writel(spi, SPI_CON_RUEN | SPI_CON_AEN | SPI_CON_TEN |
+ SPI_CON_REN | SPI_CON_TXOFF | SPI_CON_RXOFF, SPI_CON);
+
+ /* Setup default SPI mode */
+ hw_setup_bits_per_word(spi, spi->bits_per_word);
+ hw_setup_clock_mode(spi, SPI_MODE_0);
+
+ /* Enable master mode and clear error flags */
+ lantiq_ssc_writel(spi, SPI_WHBSTATE_SETMS | SPI_WHBSTATE_CLR_ERRORS,
+ SPI_WHBSTATE);
+
+ /* Reset GPIO/CS registers */
+ lantiq_ssc_writel(spi, 0, SPI_GPOCON);
+ lantiq_ssc_writel(spi, 0xFF00, SPI_FPGO);
+
+ /* Enable and flush FIFOs */
+ rx_fifo_reset(spi);
+ tx_fifo_reset(spi);
+
+ /* Enable interrupts */
+ lantiq_ssc_writel(spi, hwcfg->irnen_t | hwcfg->irnen_r | SPI_IRNEN_E,
+ SPI_IRNEN);
+}
+
+static int lantiq_ssc_setup(struct spi_device *spidev)
+{
+ struct spi_master *master = spidev->master;
+ struct lantiq_ssc_spi *spi = spi_master_get_devdata(master);
+ unsigned int cs = spidev->chip_select;
+ u32 gpocon;
+
+ /* GPIOs are used for CS */
+ if (gpio_is_valid(spidev->cs_gpio))
+ return 0;
+
+ dev_dbg(spi->dev, "using internal chipselect %u\n", cs);
+
+ if (cs < spi->base_cs) {
+ dev_err(spi->dev,
+ "chipselect %i too small (min %i)\n", cs, spi->base_cs);
+ return -EINVAL;
+ }
+
+ /* set GPO pin to CS mode */
+ gpocon = 1 << ((cs - spi->base_cs) + SPI_GPOCON_ISCSBN_S);
+
+ /* invert GPO pin */
+ if (spidev->mode & SPI_CS_HIGH)
+ gpocon |= 1 << (cs - spi->base_cs);
+
+ lantiq_ssc_maskl(spi, 0, gpocon, SPI_GPOCON);
+
+ return 0;
+}
+
+static int lantiq_ssc_prepare_message(struct spi_master *master,
+ struct spi_message *message)
+{
+ struct lantiq_ssc_spi *spi = spi_master_get_devdata(master);
+
+ hw_enter_config_mode(spi);
+ hw_setup_clock_mode(spi, message->spi->mode);
+ hw_enter_active_mode(spi);
+
+ return 0;
+}
+
+static void hw_setup_transfer(struct lantiq_ssc_spi *spi,
+ struct spi_device *spidev, struct spi_transfer *t)
+{
+ unsigned int speed_hz = t->speed_hz;
+ unsigned int bits_per_word = t->bits_per_word;
+ u32 con;
+
+ if (bits_per_word != spi->bits_per_word ||
+ speed_hz != spi->speed_hz) {
+ hw_enter_config_mode(spi);
+ hw_setup_speed_hz(spi, speed_hz);
+ hw_setup_bits_per_word(spi, bits_per_word);
+ hw_enter_active_mode(spi);
+
+ spi->speed_hz = speed_hz;
+ spi->bits_per_word = bits_per_word;
+ }
+
+ /* Configure transmitter and receiver */
+ con = lantiq_ssc_readl(spi, SPI_CON);
+ if (t->tx_buf)
+ con &= ~SPI_CON_TXOFF;
+ else
+ con |= SPI_CON_TXOFF;
+
+ if (t->rx_buf)
+ con &= ~SPI_CON_RXOFF;
+ else
+ con |= SPI_CON_RXOFF;
+
+ lantiq_ssc_writel(spi, con, SPI_CON);
+}
+
+static int lantiq_ssc_unprepare_message(struct spi_master *master,
+ struct spi_message *message)
+{
+ struct lantiq_ssc_spi *spi = spi_master_get_devdata(master);
+
+ flush_workqueue(spi->wq);
+
+ /* Disable transmitter and receiver while idle */
+ lantiq_ssc_maskl(spi, 0, SPI_CON_TXOFF | SPI_CON_RXOFF, SPI_CON);
+
+ return 0;
+}
+
+static void tx_fifo_write(struct lantiq_ssc_spi *spi)
+{
+ const u8 *tx8;
+ const u16 *tx16;
+ const u32 *tx32;
+ u32 data;
+ unsigned int tx_free = tx_fifo_free(spi);
+
+ while (spi->tx_todo && tx_free) {
+ switch (spi->bits_per_word) {
+ case 2 ... 8:
+ tx8 = spi->tx;
+ data = *tx8;
+ spi->tx_todo--;
+ spi->tx++;
+ break;
+ case 16:
+ tx16 = (u16 *) spi->tx;
+ data = *tx16;
+ spi->tx_todo -= 2;
+ spi->tx += 2;
+ break;
+ case 32:
+ tx32 = (u32 *) spi->tx;
+ data = *tx32;
+ spi->tx_todo -= 4;
+ spi->tx += 4;
+ break;
+ default:
+ WARN_ON(1);
+ data = 0;
+ break;
+ }
+
+ lantiq_ssc_writel(spi, data, SPI_TB);
+ tx_free--;
+ }
+}
+
+static void rx_fifo_read_full_duplex(struct lantiq_ssc_spi *spi)
+{
+ u8 *rx8;
+ u16 *rx16;
+ u32 *rx32;
+ u32 data;
+ unsigned int rx_fill = rx_fifo_level(spi);
+
+ while (rx_fill) {
+ data = lantiq_ssc_readl(spi, SPI_RB);
+
+ switch (spi->bits_per_word) {
+ case 2 ... 8:
+ rx8 = spi->rx;
+ *rx8 = data;
+ spi->rx_todo--;
+ spi->rx++;
+ break;
+ case 16:
+ rx16 = (u16 *) spi->rx;
+ *rx16 = data;
+ spi->rx_todo -= 2;
+ spi->rx += 2;
+ break;
+ case 32:
+ rx32 = (u32 *) spi->rx;
+ *rx32 = data;
+ spi->rx_todo -= 4;
+ spi->rx += 4;
+ break;
+ default:
+ WARN_ON(1);
+ break;
+ }
+
+ rx_fill--;
+ }
+}
+
+static void rx_fifo_read_half_duplex(struct lantiq_ssc_spi *spi)
+{
+ u32 data, *rx32;
+ u8 *rx8;
+ unsigned int rxbv, shift;
+ unsigned int rx_fill = rx_fifo_level(spi);
+
+ /*
+ * In RX-only mode the bits per word value is ignored by HW. A value
+ * of 32 is used instead. Thus all 4 bytes per FIFO must be read.
+ * If remaining RX bytes are less than 4, the FIFO must be read
+ * differently. The amount of received and valid bytes is indicated
+ * by STAT.RXBV register value.
+ */
+ while (rx_fill) {
+ if (spi->rx_todo < 4) {
+ rxbv = (lantiq_ssc_readl(spi, SPI_STAT) &
+ SPI_STAT_RXBV_M) >> SPI_STAT_RXBV_S;
+ data = lantiq_ssc_readl(spi, SPI_RB);
+
+ shift = (rxbv - 1) * 8;
+ rx8 = spi->rx;
+
+ while (rxbv) {
+ *rx8++ = (data >> shift) & 0xFF;
+ rxbv--;
+ shift -= 8;
+ spi->rx_todo--;
+ spi->rx++;
+ }
+ } else {
+ data = lantiq_ssc_readl(spi, SPI_RB);
+ rx32 = (u32 *) spi->rx;
+
+ *rx32++ = data;
+ spi->rx_todo -= 4;
+ spi->rx += 4;
+ }
+ rx_fill--;
+ }
+}
+
+static void rx_request(struct lantiq_ssc_spi *spi)
+{
+ unsigned int rxreq, rxreq_max;
+
+ /*
+ * To avoid receive overflows at high clocks it is better to request
+ * only the amount of bytes that fits into all FIFOs. This value
+ * depends on the FIFO size implemented in hardware.
+ */
+ rxreq = spi->rx_todo;
+ rxreq_max = spi->rx_fifo_size * 4;
+ if (rxreq > rxreq_max)
+ rxreq = rxreq_max;
+
+ lantiq_ssc_writel(spi, rxreq, SPI_RXREQ);
+}
+
+static irqreturn_t lantiq_ssc_xmit_interrupt(int irq, void *data)
+{
+ struct lantiq_ssc_spi *spi = data;
+
+ if (spi->tx) {
+ if (spi->rx && spi->rx_todo)
+ rx_fifo_read_full_duplex(spi);
+
+ if (spi->tx_todo)
+ tx_fifo_write(spi);
+ else if (!tx_fifo_level(spi))
+ goto completed;
+ } else if (spi->rx) {
+ if (spi->rx_todo) {
+ rx_fifo_read_half_duplex(spi);
+
+ if (spi->rx_todo)
+ rx_request(spi);
+ else
+ goto completed;
+ } else {
+ goto completed;
+ }
+ }
+
+ return IRQ_HANDLED;
+
+completed:
+ queue_work(spi->wq, &spi->work);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t lantiq_ssc_err_interrupt(int irq, void *data)
+{
+ struct lantiq_ssc_spi *spi = data;
+ u32 stat = lantiq_ssc_readl(spi, SPI_STAT);
+
+ if (!(stat & SPI_STAT_ERRORS))
+ return IRQ_NONE;
+
+ if (stat & SPI_STAT_RUE)
+ dev_err(spi->dev, "receive underflow error\n");
+ if (stat & SPI_STAT_TUE)
+ dev_err(spi->dev, "transmit underflow error\n");
+ if (stat & SPI_STAT_AE)
+ dev_err(spi->dev, "abort error\n");
+ if (stat & SPI_STAT_RE)
+ dev_err(spi->dev, "receive overflow error\n");
+ if (stat & SPI_STAT_TE)
+ dev_err(spi->dev, "transmit overflow error\n");
+ if (stat & SPI_STAT_ME)
+ dev_err(spi->dev, "mode error\n");
+
+ /* Clear error flags */
+ lantiq_ssc_maskl(spi, 0, SPI_WHBSTATE_CLR_ERRORS, SPI_WHBSTATE);
+
+ /* set bad status so it can be retried */
+ if (spi->master->cur_msg)
+ spi->master->cur_msg->status = -EIO;
+ queue_work(spi->wq, &spi->work);
+
+ return IRQ_HANDLED;
+}
+
+static int transfer_start(struct lantiq_ssc_spi *spi, struct spi_device *spidev,
+ struct spi_transfer *t)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&spi->lock, flags);
+
+ spi->tx = t->tx_buf;
+ spi->rx = t->rx_buf;
+
+ if (t->tx_buf) {
+ spi->tx_todo = t->len;
+
+ /* initially fill TX FIFO */
+ tx_fifo_write(spi);
+ }
+
+ if (spi->rx) {
+ spi->rx_todo = t->len;
+
+ /* start shift clock in RX-only mode */
+ if (!spi->tx)
+ rx_request(spi);
+ }
+
+ spin_unlock_irqrestore(&spi->lock, flags);
+
+ return t->len;
+}
+
+/*
+ * The driver only gets an interrupt when the FIFO is empty, but there
+ * is an additional shift register from which the data is written to
+ * the wire. We get the last interrupt when the controller starts to
+ * write the last word to the wire, not when it is finished. Do busy
+ * waiting till it finishes.
+ */
+static void lantiq_ssc_bussy_work(struct work_struct *work)
+{
+ struct lantiq_ssc_spi *spi;
+ unsigned long long timeout = 8LL * 1000LL;
+ unsigned long end;
+
+ spi = container_of(work, typeof(*spi), work);
+
+ do_div(timeout, spi->speed_hz);
+ timeout += timeout + 100; /* some tolerance */
+
+ end = jiffies + msecs_to_jiffies(timeout);
+ do {
+ u32 stat = lantiq_ssc_readl(spi, SPI_STAT);
+
+ if (!(stat & SPI_STAT_BSY)) {
+ spi_finalize_current_transfer(spi->master);
+ return;
+ }
+
+ cond_resched();
+ } while (!time_after_eq(jiffies, end));
+
+ if (spi->master->cur_msg)
+ spi->master->cur_msg->status = -EIO;
+ spi_finalize_current_transfer(spi->master);
+}
+
+static void lantiq_ssc_handle_err(struct spi_master *master,
+ struct spi_message *message)
+{
+ struct lantiq_ssc_spi *spi = spi_master_get_devdata(master);
+
+ /* flush FIFOs on timeout */
+ rx_fifo_flush(spi);
+ tx_fifo_flush(spi);
+}
+
+static void lantiq_ssc_set_cs(struct spi_device *spidev, bool enable)
+{
+ struct lantiq_ssc_spi *spi = spi_master_get_devdata(spidev->master);
+ unsigned int cs = spidev->chip_select;
+ u32 fgpo;
+
+ if (!!(spidev->mode & SPI_CS_HIGH) == enable)
+ fgpo = (1 << (cs - spi->base_cs));
+ else
+ fgpo = (1 << (cs - spi->base_cs + SPI_FGPO_SETOUTN_S));
+
+ lantiq_ssc_writel(spi, fgpo, SPI_FPGO);
+}
+
+static int lantiq_ssc_transfer_one(struct spi_master *master,
+ struct spi_device *spidev,
+ struct spi_transfer *t)
+{
+ struct lantiq_ssc_spi *spi = spi_master_get_devdata(master);
+
+ hw_setup_transfer(spi, spidev, t);
+
+ return transfer_start(spi, spidev, t);
+}
+
+static const struct lantiq_ssc_hwcfg lantiq_ssc_xway = {
+ .irnen_r = SPI_IRNEN_R_XWAY,
+ .irnen_t = SPI_IRNEN_T_XWAY,
+};
+
+static const struct lantiq_ssc_hwcfg lantiq_ssc_xrx = {
+ .irnen_r = SPI_IRNEN_R_XRX,
+ .irnen_t = SPI_IRNEN_T_XRX,
+};
+
+static const struct of_device_id lantiq_ssc_match[] = {
+ { .compatible = "lantiq,ase-spi", .data = &lantiq_ssc_xway, },
+ { .compatible = "lantiq,falcon-spi", .data = &lantiq_ssc_xrx, },
+ { .compatible = "lantiq,xrx100-spi", .data = &lantiq_ssc_xrx, },
+ {},
+};
+MODULE_DEVICE_TABLE(of, lantiq_ssc_match);
+
+static int lantiq_ssc_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct spi_master *master;
+ struct resource *res;
+ struct lantiq_ssc_spi *spi;
+ const struct lantiq_ssc_hwcfg *hwcfg;
+ const struct of_device_id *match;
+ int err, rx_irq, tx_irq, err_irq;
+ u32 id, supports_dma, revision;
+ unsigned int num_cs;
+
+ match = of_match_device(lantiq_ssc_match, dev);
+ if (!match) {
+ dev_err(dev, "no device match\n");
+ return -EINVAL;
+ }
+ hwcfg = match->data;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(dev, "failed to get resources\n");
+ return -ENXIO;
+ }
+
+ rx_irq = platform_get_irq_byname(pdev, SPI_RX_IRQ_NAME);
+ if (rx_irq < 0) {
+ dev_err(dev, "failed to get %s\n", SPI_RX_IRQ_NAME);
+ return -ENXIO;
+ }
+
+ tx_irq = platform_get_irq_byname(pdev, SPI_TX_IRQ_NAME);
+ if (tx_irq < 0) {
+ dev_err(dev, "failed to get %s\n", SPI_TX_IRQ_NAME);
+ return -ENXIO;
+ }
+
+ err_irq = platform_get_irq_byname(pdev, SPI_ERR_IRQ_NAME);
+ if (err_irq < 0) {
+ dev_err(dev, "failed to get %s\n", SPI_ERR_IRQ_NAME);
+ return -ENXIO;
+ }
+
+ master = spi_alloc_master(dev, sizeof(struct lantiq_ssc_spi));
+ if (!master)
+ return -ENOMEM;
+
+ spi = spi_master_get_devdata(master);
+ spi->master = master;
+ spi->dev = dev;
+ spi->hwcfg = hwcfg;
+ platform_set_drvdata(pdev, spi);
+
+ spi->regbase = devm_ioremap_resource(dev, res);
+ if (IS_ERR(spi->regbase)) {
+ err = PTR_ERR(spi->regbase);
+ goto err_master_put;
+ }
+
+ err = devm_request_irq(dev, rx_irq, lantiq_ssc_xmit_interrupt,
+ 0, SPI_RX_IRQ_NAME, spi);
+ if (err)
+ goto err_master_put;
+
+ err = devm_request_irq(dev, tx_irq, lantiq_ssc_xmit_interrupt,
+ 0, SPI_TX_IRQ_NAME, spi);
+ if (err)
+ goto err_master_put;
+
+ err = devm_request_irq(dev, err_irq, lantiq_ssc_err_interrupt,
+ 0, SPI_ERR_IRQ_NAME, spi);
+ if (err)
+ goto err_master_put;
+
+ spi->spi_clk = devm_clk_get(dev, "gate");
+ if (IS_ERR(spi->spi_clk)) {
+ err = PTR_ERR(spi->spi_clk);
+ goto err_master_put;
+ }
+ err = clk_prepare_enable(spi->spi_clk);
+ if (err)
+ goto err_master_put;
+
+ /*
+ * Use the old clk_get_fpi() function on Lantiq platform, till it
+ * supports common clk.
+ */
+#if defined(CONFIG_LANTIQ) && !defined(CONFIG_COMMON_CLK)
+ spi->fpi_clk = clk_get_fpi();
+#else
+ spi->fpi_clk = clk_get(dev, "freq");
+#endif
+ if (IS_ERR(spi->fpi_clk)) {
+ err = PTR_ERR(spi->fpi_clk);
+ goto err_clk_disable;
+ }
+
+ num_cs = 8;
+ of_property_read_u32(pdev->dev.of_node, "num-cs", &num_cs);
+
+ spi->base_cs = 1;
+ of_property_read_u32(pdev->dev.of_node, "base-cs", &spi->base_cs);
+
+ spin_lock_init(&spi->lock);
+ spi->bits_per_word = 8;
+ spi->speed_hz = 0;
+
+ master->dev.of_node = pdev->dev.of_node;
+ master->num_chipselect = num_cs;
+ master->setup = lantiq_ssc_setup;
+ master->set_cs = lantiq_ssc_set_cs;
+ master->handle_err = lantiq_ssc_handle_err;
+ master->prepare_message = lantiq_ssc_prepare_message;
+ master->unprepare_message = lantiq_ssc_unprepare_message;
+ master->transfer_one = lantiq_ssc_transfer_one;
+ master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST | SPI_CS_HIGH |
+ SPI_LOOP;
+ master->bits_per_word_mask = SPI_BPW_RANGE_MASK(2, 8) |
+ SPI_BPW_MASK(16) | SPI_BPW_MASK(32);
+
+ spi->wq = alloc_ordered_workqueue(dev_name(dev), 0);
+ if (!spi->wq) {
+ err = -ENOMEM;
+ goto err_clk_put;
+ }
+ INIT_WORK(&spi->work, lantiq_ssc_bussy_work);
+
+ id = lantiq_ssc_readl(spi, SPI_ID);
+ spi->tx_fifo_size = (id & SPI_ID_TXFS_M) >> SPI_ID_TXFS_S;
+ spi->rx_fifo_size = (id & SPI_ID_RXFS_M) >> SPI_ID_RXFS_S;
+ supports_dma = (id & SPI_ID_CFG_M) >> SPI_ID_CFG_S;
+ revision = id & SPI_ID_REV_M;
+
+ lantiq_ssc_hw_init(spi);
+
+ dev_info(dev,
+ "Lantiq SSC SPI controller (Rev %i, TXFS %u, RXFS %u, DMA %u)\n",
+ revision, spi->tx_fifo_size, spi->rx_fifo_size, supports_dma);
+
+ err = devm_spi_register_master(dev, master);
+ if (err) {
+ dev_err(dev, "failed to register spi_master\n");
+ goto err_wq_destroy;
+ }
+
+ return 0;
+
+err_wq_destroy:
+ destroy_workqueue(spi->wq);
+err_clk_put:
+ clk_put(spi->fpi_clk);
+err_clk_disable:
+ clk_disable_unprepare(spi->spi_clk);
+err_master_put:
+ spi_master_put(master);
+
+ return err;
+}
+
+static int lantiq_ssc_remove(struct platform_device *pdev)
+{
+ struct lantiq_ssc_spi *spi = platform_get_drvdata(pdev);
+
+ lantiq_ssc_writel(spi, 0, SPI_IRNEN);
+ lantiq_ssc_writel(spi, 0, SPI_CLC);
+ rx_fifo_flush(spi);
+ tx_fifo_flush(spi);
+ hw_enter_config_mode(spi);
+
+ destroy_workqueue(spi->wq);
+ clk_disable_unprepare(spi->spi_clk);
+ clk_put(spi->fpi_clk);
+
+ return 0;
+}
+
+static struct platform_driver lantiq_ssc_driver = {
+ .probe = lantiq_ssc_probe,
+ .remove = lantiq_ssc_remove,
+ .driver = {
+ .name = "spi-lantiq-ssc",
+ .owner = THIS_MODULE,
+ .of_match_table = lantiq_ssc_match,
+ },
+};
+module_platform_driver(lantiq_ssc_driver);
+
+MODULE_DESCRIPTION("Lantiq SSC SPI controller driver");
+MODULE_AUTHOR("Daniel Schwierzeck <daniel.schwierzeck@gmail.com>");
+MODULE_AUTHOR("Hauke Mehrtens <hauke@hauke-m.de>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:spi-lantiq-ssc");
diff --git a/drivers/spi/spi-mpc52xx.c b/drivers/spi/spi-mpc52xx.c
index c36002110c30..e8b59ce4dc3a 100644
--- a/drivers/spi/spi-mpc52xx.c
+++ b/drivers/spi/spi-mpc52xx.c
@@ -437,8 +437,9 @@ static int mpc52xx_spi_probe(struct platform_device *op)
ms->gpio_cs_count = of_gpio_count(op->dev.of_node);
if (ms->gpio_cs_count > 0) {
master->num_chipselect = ms->gpio_cs_count;
- ms->gpio_cs = kmalloc(ms->gpio_cs_count * sizeof(unsigned int),
- GFP_KERNEL);
+ ms->gpio_cs = kmalloc_array(ms->gpio_cs_count,
+ sizeof(*ms->gpio_cs),
+ GFP_KERNEL);
if (!ms->gpio_cs) {
rc = -ENOMEM;
goto err_alloc_gpio;
@@ -448,8 +449,7 @@ static int mpc52xx_spi_probe(struct platform_device *op)
gpio_cs = of_get_gpio(op->dev.of_node, i);
if (gpio_cs < 0) {
dev_err(&op->dev,
- "could not parse the gpio field "
- "in oftree\n");
+ "could not parse the gpio field in oftree\n");
rc = -ENODEV;
goto err_gpio;
}
@@ -457,8 +457,8 @@ static int mpc52xx_spi_probe(struct platform_device *op)
rc = gpio_request(gpio_cs, dev_name(&op->dev));
if (rc) {
dev_err(&op->dev,
- "can't request spi cs gpio #%d "
- "on gpio line %d\n", i, gpio_cs);
+ "can't request spi cs gpio #%d on gpio line %d\n",
+ i, gpio_cs);
goto err_gpio;
}
diff --git a/drivers/spi/spi-mt65xx.c b/drivers/spi/spi-mt65xx.c
index 899d7a8f0889..278867a31950 100644
--- a/drivers/spi/spi-mt65xx.c
+++ b/drivers/spi/spi-mt65xx.c
@@ -73,7 +73,7 @@
#define MTK_SPI_IDLE 0
#define MTK_SPI_PAUSED 1
-#define MTK_SPI_MAX_FIFO_SIZE 32
+#define MTK_SPI_MAX_FIFO_SIZE 32U
#define MTK_SPI_PACKET_SIZE 1024
struct mtk_spi_compatible {
@@ -333,7 +333,7 @@ static int mtk_spi_fifo_transfer(struct spi_master *master,
struct mtk_spi *mdata = spi_master_get_devdata(master);
mdata->cur_transfer = xfer;
- mdata->xfer_len = xfer->len;
+ mdata->xfer_len = min(MTK_SPI_MAX_FIFO_SIZE, xfer->len);
mtk_spi_prepare_transfer(master, xfer);
mtk_spi_setup_packet(master);
@@ -410,7 +410,10 @@ static bool mtk_spi_can_dma(struct spi_master *master,
struct spi_device *spi,
struct spi_transfer *xfer)
{
- return xfer->len > MTK_SPI_MAX_FIFO_SIZE;
+ /* Buffers for DMA transactions must be 4-byte aligned */
+ return (xfer->len > MTK_SPI_MAX_FIFO_SIZE &&
+ (unsigned long)xfer->tx_buf % 4 == 0 &&
+ (unsigned long)xfer->rx_buf % 4 == 0);
}
static int mtk_spi_setup(struct spi_device *spi)
@@ -451,7 +454,33 @@ static irqreturn_t mtk_spi_interrupt(int irq, void *dev_id)
&reg_val, remainder);
}
}
- spi_finalize_current_transfer(master);
+
+ trans->len -= mdata->xfer_len;
+ if (!trans->len) {
+ spi_finalize_current_transfer(master);
+ return IRQ_HANDLED;
+ }
+
+ if (trans->tx_buf)
+ trans->tx_buf += mdata->xfer_len;
+ if (trans->rx_buf)
+ trans->rx_buf += mdata->xfer_len;
+
+ mdata->xfer_len = min(MTK_SPI_MAX_FIFO_SIZE, trans->len);
+ mtk_spi_setup_packet(master);
+
+ cnt = trans->len / 4;
+ iowrite32_rep(mdata->base + SPI_TX_DATA_REG, trans->tx_buf, cnt);
+
+ remainder = trans->len % 4;
+ if (remainder > 0) {
+ reg_val = 0;
+ memcpy(&reg_val, trans->tx_buf + (cnt * 4), remainder);
+ writel(reg_val, mdata->base + SPI_TX_DATA_REG);
+ }
+
+ mtk_spi_enable_transfer(master);
+
return IRQ_HANDLED;
}
diff --git a/drivers/spi/spi-ppc4xx.c b/drivers/spi/spi-ppc4xx.c
index dd3d0a218d8b..967d94844b30 100644
--- a/drivers/spi/spi-ppc4xx.c
+++ b/drivers/spi/spi-ppc4xx.c
@@ -411,7 +411,7 @@ static int spi_ppc4xx_of_probe(struct platform_device *op)
if (num_gpios > 0) {
int i;
- hw->gpios = kzalloc(sizeof(int) * num_gpios, GFP_KERNEL);
+ hw->gpios = kcalloc(num_gpios, sizeof(*hw->gpios), GFP_KERNEL);
if (!hw->gpios) {
ret = -ENOMEM;
goto free_master;
@@ -428,8 +428,9 @@ static int spi_ppc4xx_of_probe(struct platform_device *op)
/* Real CS - set the initial state. */
ret = gpio_request(gpio, np->name);
if (ret < 0) {
- dev_err(dev, "can't request gpio "
- "#%d: %d\n", i, ret);
+ dev_err(dev,
+ "can't request gpio #%d: %d\n",
+ i, ret);
goto free_gpios;
}
diff --git a/drivers/spi/spi-pxa2xx-pci.c b/drivers/spi/spi-pxa2xx-pci.c
index 58d2d48e16a5..869f188b02eb 100644
--- a/drivers/spi/spi-pxa2xx-pci.c
+++ b/drivers/spi/spi-pxa2xx-pci.c
@@ -41,6 +41,13 @@ struct pxa_spi_info {
static struct dw_dma_slave byt_tx_param = { .dst_id = 0 };
static struct dw_dma_slave byt_rx_param = { .src_id = 1 };
+static struct dw_dma_slave mrfld3_tx_param = { .dst_id = 15 };
+static struct dw_dma_slave mrfld3_rx_param = { .src_id = 14 };
+static struct dw_dma_slave mrfld5_tx_param = { .dst_id = 13 };
+static struct dw_dma_slave mrfld5_rx_param = { .src_id = 12 };
+static struct dw_dma_slave mrfld6_tx_param = { .dst_id = 11 };
+static struct dw_dma_slave mrfld6_rx_param = { .src_id = 10 };
+
static struct dw_dma_slave bsw0_tx_param = { .dst_id = 0 };
static struct dw_dma_slave bsw0_rx_param = { .src_id = 1 };
static struct dw_dma_slave bsw1_tx_param = { .dst_id = 6 };
@@ -93,22 +100,39 @@ static int lpss_spi_setup(struct pci_dev *dev, struct pxa_spi_info *c)
static int mrfld_spi_setup(struct pci_dev *dev, struct pxa_spi_info *c)
{
+ struct pci_dev *dma_dev = pci_get_slot(dev->bus, PCI_DEVFN(21, 0));
+ struct dw_dma_slave *tx, *rx;
+
switch (PCI_FUNC(dev->devfn)) {
case 0:
c->port_id = 3;
c->num_chipselect = 1;
+ c->tx_param = &mrfld3_tx_param;
+ c->rx_param = &mrfld3_rx_param;
break;
case 1:
c->port_id = 5;
c->num_chipselect = 4;
+ c->tx_param = &mrfld5_tx_param;
+ c->rx_param = &mrfld5_rx_param;
break;
case 2:
c->port_id = 6;
c->num_chipselect = 1;
+ c->tx_param = &mrfld6_tx_param;
+ c->rx_param = &mrfld6_rx_param;
break;
default:
return -ENODEV;
}
+
+ tx = c->tx_param;
+ tx->dma_dev = &dma_dev->dev;
+
+ rx = c->rx_param;
+ rx->dma_dev = &dma_dev->dev;
+
+ c->dma_filter = lpss_dma_filter;
return 0;
}
@@ -203,10 +227,16 @@ static int pxa2xx_spi_pci_probe(struct pci_dev *dev,
ssp = &spi_pdata.ssp;
ssp->phys_base = pci_resource_start(dev, 0);
ssp->mmio_base = pcim_iomap_table(dev)[0];
- ssp->irq = dev->irq;
ssp->port_id = (c->port_id >= 0) ? c->port_id : dev->devfn;
ssp->type = c->type;
+ pci_set_master(dev);
+
+ ret = pci_alloc_irq_vectors(dev, 1, 1, PCI_IRQ_ALL_TYPES);
+ if (ret < 0)
+ return ret;
+ ssp->irq = pci_irq_vector(dev, 0);
+
snprintf(buf, sizeof(buf), "pxa2xx-spi.%d", ssp->port_id);
ssp->clk = clk_register_fixed_rate(&dev->dev, buf , NULL, 0,
c->max_clk_rate);
diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c
index d6239fa718be..47b65d7c4072 100644
--- a/drivers/spi/spi-pxa2xx.c
+++ b/drivers/spi/spi-pxa2xx.c
@@ -732,6 +732,20 @@ static irqreturn_t interrupt_transfer(struct driver_data *drv_data)
return IRQ_HANDLED;
}
+static void handle_bad_msg(struct driver_data *drv_data)
+{
+ pxa2xx_spi_write(drv_data, SSCR0,
+ pxa2xx_spi_read(drv_data, SSCR0) & ~SSCR0_SSE);
+ pxa2xx_spi_write(drv_data, SSCR1,
+ pxa2xx_spi_read(drv_data, SSCR1) & ~drv_data->int_cr1);
+ if (!pxa25x_ssp_comp(drv_data))
+ pxa2xx_spi_write(drv_data, SSTO, 0);
+ write_SSSR_CS(drv_data, drv_data->clear_sr);
+
+ dev_err(&drv_data->pdev->dev,
+ "bad message state in interrupt handler\n");
+}
+
static irqreturn_t ssp_int(int irq, void *dev_id)
{
struct driver_data *drv_data = dev_id;
@@ -771,21 +785,11 @@ static irqreturn_t ssp_int(int irq, void *dev_id)
if (!(status & mask))
return IRQ_NONE;
- if (!drv_data->master->cur_msg) {
-
- pxa2xx_spi_write(drv_data, SSCR0,
- pxa2xx_spi_read(drv_data, SSCR0)
- & ~SSCR0_SSE);
- pxa2xx_spi_write(drv_data, SSCR1,
- pxa2xx_spi_read(drv_data, SSCR1)
- & ~drv_data->int_cr1);
- if (!pxa25x_ssp_comp(drv_data))
- pxa2xx_spi_write(drv_data, SSTO, 0);
- write_SSSR_CS(drv_data, drv_data->clear_sr);
-
- dev_err(&drv_data->pdev->dev,
- "bad message state in interrupt handler\n");
+ pxa2xx_spi_write(drv_data, SSCR1, sccr1_reg & ~drv_data->int_cr1);
+ pxa2xx_spi_write(drv_data, SSCR1, sccr1_reg);
+ if (!drv_data->master->cur_msg) {
+ handle_bad_msg(drv_data);
/* Never fail */
return IRQ_HANDLED;
}
@@ -1458,6 +1462,10 @@ static const struct pci_device_id pxa2xx_spi_pci_compound_match[] = {
{ PCI_VDEVICE(INTEL, 0x1ac2), LPSS_BXT_SSP },
{ PCI_VDEVICE(INTEL, 0x1ac4), LPSS_BXT_SSP },
{ PCI_VDEVICE(INTEL, 0x1ac6), LPSS_BXT_SSP },
+ /* GLK */
+ { PCI_VDEVICE(INTEL, 0x31c2), LPSS_BXT_SSP },
+ { PCI_VDEVICE(INTEL, 0x31c4), LPSS_BXT_SSP },
+ { PCI_VDEVICE(INTEL, 0x31c6), LPSS_BXT_SSP },
/* APL */
{ PCI_VDEVICE(INTEL, 0x5ac2), LPSS_BXT_SSP },
{ PCI_VDEVICE(INTEL, 0x5ac4), LPSS_BXT_SSP },
diff --git a/drivers/spi/spi-rockchip.c b/drivers/spi/spi-rockchip.c
index 0f89c2169c24..acf31f36b898 100644
--- a/drivers/spi/spi-rockchip.c
+++ b/drivers/spi/spi-rockchip.c
@@ -17,6 +17,7 @@
#include <linux/dmaengine.h>
#include <linux/module.h>
#include <linux/of.h>
+#include <linux/pinctrl/consumer.h>
#include <linux/platform_device.h>
#include <linux/spi/spi.h>
#include <linux/pm_runtime.h>
@@ -843,6 +844,8 @@ static int rockchip_spi_suspend(struct device *dev)
clk_disable_unprepare(rs->apb_pclk);
}
+ pinctrl_pm_select_sleep_state(dev);
+
return ret;
}
@@ -852,6 +855,8 @@ static int rockchip_spi_resume(struct device *dev)
struct spi_master *master = dev_get_drvdata(dev);
struct rockchip_spi *rs = spi_master_get_devdata(master);
+ pinctrl_pm_select_default_state(dev);
+
if (!pm_runtime_suspended(dev)) {
ret = clk_prepare_enable(rs->apb_pclk);
if (ret < 0)
diff --git a/drivers/spi/spi-rspi.c b/drivers/spi/spi-rspi.c
index 9daf50031737..2a10b3f94ff7 100644
--- a/drivers/spi/spi-rspi.c
+++ b/drivers/spi/spi-rspi.c
@@ -808,7 +808,7 @@ static int qspi_transfer_out(struct rspi_data *rspi, struct spi_transfer *xfer)
for (i = 0; i < len; i++)
rspi_write_data(rspi, *tx++);
} else {
- ret = rspi_pio_transfer(rspi, tx, NULL, n);
+ ret = rspi_pio_transfer(rspi, tx, NULL, len);
if (ret < 0)
return ret;
}
@@ -845,10 +845,9 @@ static int qspi_transfer_in(struct rspi_data *rspi, struct spi_transfer *xfer)
for (i = 0; i < len; i++)
*rx++ = rspi_read_data(rspi);
} else {
- ret = rspi_pio_transfer(rspi, NULL, rx, n);
+ ret = rspi_pio_transfer(rspi, NULL, rx, len);
if (ret < 0)
return ret;
- *rx++ = ret;
}
n -= len;
}
@@ -1227,10 +1226,8 @@ static int rspi_probe(struct platform_device *pdev)
const struct spi_ops *ops;
master = spi_alloc_master(&pdev->dev, sizeof(struct rspi_data));
- if (master == NULL) {
- dev_err(&pdev->dev, "spi_alloc_master error.\n");
+ if (master == NULL)
return -ENOMEM;
- }
of_id = of_match_device(rspi_of_match, &pdev->dev);
if (of_id) {
diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c
index 28dfdce4beae..b392cca8fa4f 100644
--- a/drivers/spi/spi-s3c64xx.c
+++ b/drivers/spi/spi-s3c64xx.c
@@ -341,43 +341,16 @@ static void s3c64xx_spi_set_cs(struct spi_device *spi, bool enable)
static int s3c64xx_spi_prepare_transfer(struct spi_master *spi)
{
struct s3c64xx_spi_driver_data *sdd = spi_master_get_devdata(spi);
- struct device *dev = &sdd->pdev->dev;
if (is_polling(sdd))
return 0;
- /* Acquire DMA channels */
- sdd->rx_dma.ch = dma_request_slave_channel(dev, "rx");
- if (!sdd->rx_dma.ch) {
- dev_err(dev, "Failed to get RX DMA channel\n");
- return -EBUSY;
- }
spi->dma_rx = sdd->rx_dma.ch;
-
- sdd->tx_dma.ch = dma_request_slave_channel(dev, "tx");
- if (!sdd->tx_dma.ch) {
- dev_err(dev, "Failed to get TX DMA channel\n");
- dma_release_channel(sdd->rx_dma.ch);
- return -EBUSY;
- }
spi->dma_tx = sdd->tx_dma.ch;
return 0;
}
-static int s3c64xx_spi_unprepare_transfer(struct spi_master *spi)
-{
- struct s3c64xx_spi_driver_data *sdd = spi_master_get_devdata(spi);
-
- /* Free DMA channels */
- if (!is_polling(sdd)) {
- dma_release_channel(sdd->rx_dma.ch);
- dma_release_channel(sdd->tx_dma.ch);
- }
-
- return 0;
-}
-
static bool s3c64xx_spi_can_dma(struct spi_master *master,
struct spi_device *spi,
struct spi_transfer *xfer)
@@ -996,7 +969,7 @@ static struct s3c64xx_spi_info *s3c64xx_spi_parse_dt(struct device *dev)
sci->num_cs = temp;
}
- sci->no_cs = of_property_read_bool(dev->of_node, "broken-cs");
+ sci->no_cs = of_property_read_bool(dev->of_node, "no-cs-readback");
return sci;
}
@@ -1094,7 +1067,6 @@ static int s3c64xx_spi_probe(struct platform_device *pdev)
master->prepare_transfer_hardware = s3c64xx_spi_prepare_transfer;
master->prepare_message = s3c64xx_spi_prepare_message;
master->transfer_one = s3c64xx_spi_transfer_one;
- master->unprepare_transfer_hardware = s3c64xx_spi_unprepare_transfer;
master->num_chipselect = sci->num_cs;
master->dma_alignment = 8;
master->bits_per_word_mask = SPI_BPW_MASK(32) | SPI_BPW_MASK(16) |
@@ -1161,6 +1133,24 @@ static int s3c64xx_spi_probe(struct platform_device *pdev)
}
}
+ if (!is_polling(sdd)) {
+ /* Acquire DMA channels */
+ sdd->rx_dma.ch = dma_request_slave_channel_reason(&pdev->dev,
+ "rx");
+ if (IS_ERR(sdd->rx_dma.ch)) {
+ dev_err(&pdev->dev, "Failed to get RX DMA channel\n");
+ ret = PTR_ERR(sdd->rx_dma.ch);
+ goto err_disable_io_clk;
+ }
+ sdd->tx_dma.ch = dma_request_slave_channel_reason(&pdev->dev,
+ "tx");
+ if (IS_ERR(sdd->tx_dma.ch)) {
+ dev_err(&pdev->dev, "Failed to get TX DMA channel\n");
+ ret = PTR_ERR(sdd->tx_dma.ch);
+ goto err_release_rx_dma;
+ }
+ }
+
pm_runtime_set_autosuspend_delay(&pdev->dev, AUTOSUSPEND_TIMEOUT);
pm_runtime_use_autosuspend(&pdev->dev);
pm_runtime_set_active(&pdev->dev);
@@ -1206,6 +1196,12 @@ err_pm_put:
pm_runtime_disable(&pdev->dev);
pm_runtime_set_suspended(&pdev->dev);
+ if (!is_polling(sdd))
+ dma_release_channel(sdd->tx_dma.ch);
+err_release_rx_dma:
+ if (!is_polling(sdd))
+ dma_release_channel(sdd->rx_dma.ch);
+err_disable_io_clk:
clk_disable_unprepare(sdd->ioclk);
err_disable_src_clk:
clk_disable_unprepare(sdd->src_clk);
@@ -1226,6 +1222,11 @@ static int s3c64xx_spi_remove(struct platform_device *pdev)
writel(0, sdd->regs + S3C64XX_SPI_INT_EN);
+ if (!is_polling(sdd)) {
+ dma_release_channel(sdd->rx_dma.ch);
+ dma_release_channel(sdd->tx_dma.ch);
+ }
+
clk_disable_unprepare(sdd->ioclk);
clk_disable_unprepare(sdd->src_clk);
diff --git a/drivers/spi/spi-sh-msiof.c b/drivers/spi/spi-sh-msiof.c
index 1f00eeb0b5a3..2ce15ca97782 100644
--- a/drivers/spi/spi-sh-msiof.c
+++ b/drivers/spi/spi-sh-msiof.c
@@ -1164,10 +1164,8 @@ static int sh_msiof_spi_probe(struct platform_device *pdev)
int ret;
master = spi_alloc_master(&pdev->dev, sizeof(struct sh_msiof_spi_priv));
- if (master == NULL) {
- dev_err(&pdev->dev, "failed to allocate spi master\n");
+ if (master == NULL)
return -ENOMEM;
- }
p = spi_master_get_devdata(master);
diff --git a/drivers/spi/spi-ti-qspi.c b/drivers/spi/spi-ti-qspi.c
index ec6fb09e2e17..ad76a44fee6f 100644
--- a/drivers/spi/spi-ti-qspi.c
+++ b/drivers/spi/spi-ti-qspi.c
@@ -652,7 +652,8 @@ static int ti_qspi_probe(struct platform_device *pdev)
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (r == NULL) {
dev_err(&pdev->dev, "missing platform data\n");
- return -ENODEV;
+ ret = -ENODEV;
+ goto free_master;
}
}
@@ -669,7 +670,8 @@ static int ti_qspi_probe(struct platform_device *pdev)
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
dev_err(&pdev->dev, "no irq resource?\n");
- return irq;
+ ret = irq;
+ goto free_master;
}
mutex_init(&qspi->list_lock);
@@ -685,15 +687,17 @@ static int ti_qspi_probe(struct platform_device *pdev)
qspi->ctrl_base =
syscon_regmap_lookup_by_phandle(np,
"syscon-chipselects");
- if (IS_ERR(qspi->ctrl_base))
- return PTR_ERR(qspi->ctrl_base);
+ if (IS_ERR(qspi->ctrl_base)) {
+ ret = PTR_ERR(qspi->ctrl_base);
+ goto free_master;
+ }
ret = of_property_read_u32_index(np,
"syscon-chipselects",
1, &qspi->ctrl_reg);
if (ret) {
dev_err(&pdev->dev,
"couldn't get ctrl_mod reg index\n");
- return ret;
+ goto free_master;
}
}
@@ -714,9 +718,10 @@ static int ti_qspi_probe(struct platform_device *pdev)
dma_cap_set(DMA_MEMCPY, mask);
qspi->rx_chan = dma_request_chan_by_mask(&mask);
- if (!qspi->rx_chan) {
+ if (IS_ERR(qspi->rx_chan)) {
dev_err(qspi->dev,
"No Rx DMA available, trying mmap mode\n");
+ qspi->rx_chan = NULL;
ret = 0;
goto no_dma;
}
@@ -742,6 +747,7 @@ no_dma:
if (!ret)
return 0;
+ pm_runtime_disable(&pdev->dev);
free_master:
spi_master_put(master);
return ret;
diff --git a/drivers/spi/spi-topcliff-pch.c b/drivers/spi/spi-topcliff-pch.c
index fcb991034c3d..97d137591b18 100644
--- a/drivers/spi/spi-topcliff-pch.c
+++ b/drivers/spi/spi-topcliff-pch.c
@@ -591,7 +591,6 @@ static void pch_spi_set_tx(struct pch_spi_data *data, int *bpw)
if (!data->pkt_rx_buff) {
/* flush queue and set status of all transfers to -ENOMEM */
- dev_err(&data->master->dev, "%s :kzalloc failed\n", __func__);
list_for_each_entry_safe(pmsg, tmp, data->queue.next, queue) {
pmsg->status = -ENOMEM;
@@ -622,8 +621,9 @@ static void pch_spi_set_tx(struct pch_spi_data *data, int *bpw)
if (n_writes > PCH_MAX_FIFO_DEPTH)
n_writes = PCH_MAX_FIFO_DEPTH;
- dev_dbg(&data->master->dev, "\n%s:Pulling down SSN low - writing "
- "0x2 to SSNXCR\n", __func__);
+ dev_dbg(&data->master->dev,
+ "\n%s:Pulling down SSN low - writing 0x2 to SSNXCR\n",
+ __func__);
pch_spi_writereg(data->master, PCH_SSNXCR, SSN_LOW);
for (j = 0; j < n_writes; j++)
@@ -915,7 +915,6 @@ static void pch_spi_release_dma(struct pch_spi_data *data)
dma_release_channel(dma->chan_rx);
dma->chan_rx = NULL;
}
- return;
}
static void pch_spi_handle_dma(struct pch_spi_data *data, int *bpw)
@@ -1008,7 +1007,7 @@ static void pch_spi_handle_dma(struct pch_spi_data *data, int *bpw)
spin_unlock_irqrestore(&data->lock, flags);
/* RX */
- dma->sg_rx_p = kzalloc(sizeof(struct scatterlist)*num, GFP_ATOMIC);
+ dma->sg_rx_p = kcalloc(num, sizeof(*dma->sg_rx_p), GFP_ATOMIC);
sg_init_table(dma->sg_rx_p, num); /* Initialize SG table */
/* offset, length setting */
sg = dma->sg_rx_p;
@@ -1068,7 +1067,7 @@ static void pch_spi_handle_dma(struct pch_spi_data *data, int *bpw)
head = 0;
}
- dma->sg_tx_p = kzalloc(sizeof(struct scatterlist)*num, GFP_ATOMIC);
+ dma->sg_tx_p = kcalloc(num, sizeof(*dma->sg_tx_p), GFP_ATOMIC);
sg_init_table(dma->sg_tx_p, num); /* Initialize SG table */
/* offset, length setting */
sg = dma->sg_tx_p;
@@ -1181,14 +1180,16 @@ static void pch_spi_process_messages(struct work_struct *pwork)
data->cur_trans =
list_entry(data->current_msg->transfers.next,
struct spi_transfer, transfer_list);
- dev_dbg(&data->master->dev, "%s "
- ":Getting 1st transfer message\n", __func__);
+ dev_dbg(&data->master->dev,
+ "%s :Getting 1st transfer message\n",
+ __func__);
} else {
data->cur_trans =
list_entry(data->cur_trans->transfer_list.next,
struct spi_transfer, transfer_list);
- dev_dbg(&data->master->dev, "%s "
- ":Getting next transfer message\n", __func__);
+ dev_dbg(&data->master->dev,
+ "%s :Getting next transfer message\n",
+ __func__);
}
spin_unlock(&data->lock);
@@ -1233,9 +1234,8 @@ static void pch_spi_process_messages(struct work_struct *pwork)
/* check for delay */
if (data->cur_trans->delay_usecs) {
- dev_dbg(&data->master->dev, "%s:"
- "delay in usec=%d\n", __func__,
- data->cur_trans->delay_usecs);
+ dev_dbg(&data->master->dev, "%s:delay in usec=%d\n",
+ __func__, data->cur_trans->delay_usecs);
udelay(data->cur_trans->delay_usecs);
}
@@ -1292,7 +1292,6 @@ static void pch_free_dma_buf(struct pch_spi_board_data *board_dat,
if (dma->rx_buf_dma)
dma_free_coherent(&board_dat->pdev->dev, PCH_BUF_SIZE,
dma->rx_buf_virt, dma->rx_buf_dma);
- return;
}
static void pch_alloc_dma_buf(struct pch_spi_board_data *board_dat,
@@ -1541,11 +1540,11 @@ static int pch_spi_probe(struct pci_dev *pdev, const struct pci_device_id *id)
int i;
struct pch_pd_dev_save *pd_dev_save;
- pd_dev_save = kzalloc(sizeof(struct pch_pd_dev_save), GFP_KERNEL);
+ pd_dev_save = kzalloc(sizeof(*pd_dev_save), GFP_KERNEL);
if (!pd_dev_save)
return -ENOMEM;
- board_dat = kzalloc(sizeof(struct pch_spi_board_data), GFP_KERNEL);
+ board_dat = kzalloc(sizeof(*board_dat), GFP_KERNEL);
if (!board_dat) {
retval = -ENOMEM;
goto err_no_mem;
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index 656dd3e3220c..f274df9e0e3e 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -621,8 +621,10 @@ void spi_unregister_device(struct spi_device *spi)
if (!spi)
return;
- if (spi->dev.of_node)
+ if (spi->dev.of_node) {
of_node_clear_flag(spi->dev.of_node, OF_POPULATED);
+ of_node_put(spi->dev.of_node);
+ }
if (ACPI_COMPANION(&spi->dev))
acpi_device_clear_enumerated(ACPI_COMPANION(&spi->dev));
device_unregister(&spi->dev);
@@ -672,7 +674,7 @@ int spi_register_board_info(struct spi_board_info const *info, unsigned n)
if (!n)
return -EINVAL;
- bi = kzalloc(n * sizeof(*bi), GFP_KERNEL);
+ bi = kcalloc(n, sizeof(*bi), GFP_KERNEL);
if (!bi)
return -ENOMEM;
@@ -805,12 +807,12 @@ static int __spi_map_msg(struct spi_master *master, struct spi_message *msg)
if (master->dma_tx)
tx_dev = master->dma_tx->device->dev;
else
- tx_dev = &master->dev;
+ tx_dev = master->dev.parent;
if (master->dma_rx)
rx_dev = master->dma_rx->device->dev;
else
- rx_dev = &master->dev;
+ rx_dev = master->dev.parent;
list_for_each_entry(xfer, &msg->transfers, transfer_list) {
if (!master->can_dma(master, msg->spi, xfer))
@@ -852,12 +854,12 @@ static int __spi_unmap_msg(struct spi_master *master, struct spi_message *msg)
if (master->dma_tx)
tx_dev = master->dma_tx->device->dev;
else
- tx_dev = &master->dev;
+ tx_dev = master->dev.parent;
if (master->dma_rx)
rx_dev = master->dma_rx->device->dev;
else
- rx_dev = &master->dev;
+ rx_dev = master->dev.parent;
list_for_each_entry(xfer, &msg->transfers, transfer_list) {
if (!master->can_dma(master, msg->spi, xfer))
@@ -1502,37 +1504,18 @@ err_init_queue:
/*-------------------------------------------------------------------------*/
#if defined(CONFIG_OF)
-static struct spi_device *
-of_register_spi_device(struct spi_master *master, struct device_node *nc)
+static int of_spi_parse_dt(struct spi_master *master, struct spi_device *spi,
+ struct device_node *nc)
{
- struct spi_device *spi;
- int rc;
u32 value;
-
- /* Alloc an spi_device */
- spi = spi_alloc_device(master);
- if (!spi) {
- dev_err(&master->dev, "spi_device alloc error for %s\n",
- nc->full_name);
- rc = -ENOMEM;
- goto err_out;
- }
-
- /* Select device driver */
- rc = of_modalias_node(nc, spi->modalias,
- sizeof(spi->modalias));
- if (rc < 0) {
- dev_err(&master->dev, "cannot find modalias for %s\n",
- nc->full_name);
- goto err_out;
- }
+ int rc;
/* Device address */
rc = of_property_read_u32(nc, "reg", &value);
if (rc) {
dev_err(&master->dev, "%s has no valid 'reg' property (%d)\n",
nc->full_name, rc);
- goto err_out;
+ return rc;
}
spi->chip_select = value;
@@ -1590,10 +1573,41 @@ of_register_spi_device(struct spi_master *master, struct device_node *nc)
if (rc) {
dev_err(&master->dev, "%s has no valid 'spi-max-frequency' property (%d)\n",
nc->full_name, rc);
- goto err_out;
+ return rc;
}
spi->max_speed_hz = value;
+ return 0;
+}
+
+static struct spi_device *
+of_register_spi_device(struct spi_master *master, struct device_node *nc)
+{
+ struct spi_device *spi;
+ int rc;
+
+ /* Alloc an spi_device */
+ spi = spi_alloc_device(master);
+ if (!spi) {
+ dev_err(&master->dev, "spi_device alloc error for %s\n",
+ nc->full_name);
+ rc = -ENOMEM;
+ goto err_out;
+ }
+
+ /* Select device driver */
+ rc = of_modalias_node(nc, spi->modalias,
+ sizeof(spi->modalias));
+ if (rc < 0) {
+ dev_err(&master->dev, "cannot find modalias for %s\n",
+ nc->full_name);
+ goto err_out;
+ }
+
+ rc = of_spi_parse_dt(master, spi, nc);
+ if (rc)
+ goto err_out;
+
/* Store a pointer to the node in the device structure */
of_node_get(nc);
spi->dev.of_node = nc;
@@ -1603,11 +1617,13 @@ of_register_spi_device(struct spi_master *master, struct device_node *nc)
if (rc) {
dev_err(&master->dev, "spi_device register error %s\n",
nc->full_name);
- goto err_out;
+ goto err_of_node_put;
}
return spi;
+err_of_node_put:
+ of_node_put(nc);
err_out:
spi_dev_put(spi);
return ERR_PTR(rc);
diff --git a/include/linux/platform_data/spi-ep93xx.h b/include/linux/platform_data/spi-ep93xx.h
index 9bb63ac13f04..171a271c2cbd 100644
--- a/include/linux/platform_data/spi-ep93xx.h
+++ b/include/linux/platform_data/spi-ep93xx.h
@@ -5,25 +5,14 @@ struct spi_device;
/**
* struct ep93xx_spi_info - EP93xx specific SPI descriptor
- * @num_chipselect: number of chip selects on this board, must be
- * at least one
+ * @chipselect: array of gpio numbers to use as chip selects
+ * @num_chipselect: ARRAY_SIZE(chipselect)
* @use_dma: use DMA for the transfers
*/
struct ep93xx_spi_info {
+ int *chipselect;
int num_chipselect;
bool use_dma;
};
-/**
- * struct ep93xx_spi_chip_ops - operation callbacks for SPI slave device
- * @setup: setup the chip select mechanism
- * @cleanup: cleanup the chip select mechanism
- * @cs_control: control the device chip select
- */
-struct ep93xx_spi_chip_ops {
- int (*setup)(struct spi_device *spi);
- void (*cleanup)(struct spi_device *spi);
- void (*cs_control)(struct spi_device *spi, int value);
-};
-
#endif /* __ASM_MACH_EP93XX_SPI_H */
diff --git a/include/linux/pxa2xx_ssp.h b/include/linux/pxa2xx_ssp.h
index 2d6f0c39ed68..a0522328d7aa 100644
--- a/include/linux/pxa2xx_ssp.h
+++ b/include/linux/pxa2xx_ssp.h
@@ -90,9 +90,9 @@
#define SSSR_RFL_MASK (0xf << 12) /* Receive FIFO Level mask */
#define SSCR1_TFT (0x000003c0) /* Transmit FIFO Threshold (mask) */
-#define SSCR1_TxTresh(x) (((x) - 1) << 6) /* level [1..16] */
+#define SSCR1_TxTresh(x) (((x) - 1) << 6) /* level [1..16] */
#define SSCR1_RFT (0x00003c00) /* Receive FIFO Threshold (mask) */
-#define SSCR1_RxTresh(x) (((x) - 1) << 10) /* level [1..16] */
+#define SSCR1_RxTresh(x) (((x) - 1) << 10) /* level [1..16] */
#define RX_THRESH_CE4100_DFLT 2
#define TX_THRESH_CE4100_DFLT 2
@@ -106,9 +106,9 @@
#define CE4100_SSCR1_RxTresh(x) (((x) - 1) << 10) /* level [1..4] */
/* QUARK_X1000 SSCR0 bit definition */
-#define QUARK_X1000_SSCR0_DSS (0x1F) /* Data Size Select (mask) */
-#define QUARK_X1000_SSCR0_DataSize(x) ((x) - 1) /* Data Size Select [4..32] */
-#define QUARK_X1000_SSCR0_FRF (0x3 << 5) /* FRame Format (mask) */
+#define QUARK_X1000_SSCR0_DSS (0x1F << 0) /* Data Size Select (mask) */
+#define QUARK_X1000_SSCR0_DataSize(x) ((x) - 1) /* Data Size Select [4..32] */
+#define QUARK_X1000_SSCR0_FRF (0x3 << 5) /* FRame Format (mask) */
#define QUARK_X1000_SSCR0_Motorola (0x0 << 5) /* Motorola's Serial Peripheral Interface (SPI) */
#define RX_THRESH_QUARK_X1000_DFLT 1
@@ -121,8 +121,8 @@
#define QUARK_X1000_SSCR1_TxTresh(x) (((x) - 1) << 6) /* level [1..32] */
#define QUARK_X1000_SSCR1_RFT (0x1F << 11) /* Receive FIFO Threshold (mask) */
#define QUARK_X1000_SSCR1_RxTresh(x) (((x) - 1) << 11) /* level [1..32] */
-#define QUARK_X1000_SSCR1_STRF (1 << 17) /* Select FIFO or EFWR */
-#define QUARK_X1000_SSCR1_EFWR (1 << 16) /* Enable FIFO Write/Read */
+#define QUARK_X1000_SSCR1_STRF (1 << 17) /* Select FIFO or EFWR */
+#define QUARK_X1000_SSCR1_EFWR (1 << 16) /* Enable FIFO Write/Read */
/* extra bits in PXA255, PXA26x and PXA27x SSP ports */
#define SSCR0_TISSP (1 << 4) /* TI Sync Serial Protocol */