summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2014-06-02 16:15:12 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2014-06-02 16:15:12 -0700
commit825f4e0271b0de3f7f31d963dcdaa0056fe9b73a (patch)
treeaef1f198da011a96fefbe9851137ca17afd929a4
parent0a58471541cc823ef8056d23945c39fec154481c (diff)
parentb5b9324a6296bd0176fe1f8e06a1220207bd1bd3 (diff)
downloadlinux-825f4e0271b0de3f7f31d963dcdaa0056fe9b73a.tar.bz2
Merge tag 'soc-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc into next
Pull part one of ARM SoC updates from Olof Johansson: "A quite large set of SoC updates this cycle. In no particular order: - Multi-cluster power management for Samsung Exynos, adding support for big.LITTLE CPU switching on EXYNOS5 - SMP support for Marvell Armada 375 and 38x - SMP rework on Allwinner A31 - Xilinx Zynq support for SOC_BUS, big endian - Marvell orion5x platform cleanup, modernizing the implementation and moving to DT. - _Finally_ moving Samsung Exynos over to support MULTIPLATFORM, so that their platform can be enabled in the same kernel binary as most of the other v7 platforms in the tree. \o/ The work isn't quite complete, there's some driver fixes still needed, but the basics now work. New SoC support added: - Freescale i.MX6SX - LSI Axxia AXM55xx SoCs - Samsung EXYNOS 3250, 5260, 5410, 5420 and 5800 - STi STIH407 plus a large set of various smaller updates for different platforms. I'm probably missing some important one here" * tag 'soc-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (281 commits) ARM: exynos: don't run exynos4 l2x0 setup on other platforms ARM: exynos: Fix "allmodconfig" build errors in mcpm and hotplug ARM: EXYNOS: mcpm rename the power_down_finish ARM: EXYNOS: Enable mcpm for dual-cluster exynos5800 SoC ARM: EXYNOS: Enable multi-platform build support ARM: EXYNOS: Consolidate Kconfig entries ARM: EXYNOS: Add support for EXYNOS5410 SoC ARM: EXYNOS: Support secondary CPU boot of Exynos3250 ARM: EXYNOS: Add Exynos3250 SoC ID ARM: EXYNOS: Add 5800 SoC support ARM: EXYNOS: initial board support for exynos5260 SoC clk: exynos5410: register clocks using common clock framework ARM: debug: qcom: add UART addresses to Kconfig help for APQ8084 ARM: sunxi: allow building without reset controller Documentation: devicetree: arm: sort enable-method entries ARM: rockchip: convert smp bringup to CPU_METHOD_OF_DECLARE clk: exynos5250: Add missing sysmmu clocks for DISP and ISP blocks ARM: dts: axxia: Add reset controller power: reset: Add Axxia system reset driver ARM: axxia: Adding defconfig for AXM55xx ...
-rw-r--r--Documentation/arm/Marvell/README5
-rw-r--r--Documentation/arm/sti/stih407-overview.txt18
-rw-r--r--Documentation/devicetree/bindings/arm/armada-370-xp-pmsu.txt19
-rw-r--r--Documentation/devicetree/bindings/arm/armada-cpu-reset.txt14
-rw-r--r--Documentation/devicetree/bindings/arm/axxia.txt12
-rw-r--r--Documentation/devicetree/bindings/arm/coherency-fabric.txt32
-rw-r--r--Documentation/devicetree/bindings/arm/cpus.txt8
-rw-r--r--Documentation/devicetree/bindings/arm/exynos/smp-sysram.txt38
-rw-r--r--Documentation/devicetree/bindings/arm/sti.txt15
-rw-r--r--Documentation/devicetree/bindings/clock/at91-clock.txt128
-rw-r--r--Documentation/devicetree/bindings/clock/exynos3250-clock.txt41
-rw-r--r--Documentation/devicetree/bindings/clock/exynos5260-clock.txt190
-rw-r--r--Documentation/devicetree/bindings/clock/exynos5410-clock.txt45
-rw-r--r--Documentation/devicetree/bindings/clock/exynos5420-clock.txt3
-rw-r--r--Documentation/devicetree/bindings/clock/imx25-clock.txt3
-rw-r--r--Documentation/devicetree/bindings/clock/imx27-clock.txt7
-rw-r--r--Documentation/devicetree/bindings/clock/imx6q-clock.txt1
-rw-r--r--Documentation/devicetree/bindings/clock/imx6sx-clock.txt13
-rw-r--r--Documentation/devicetree/bindings/clock/samsung,s3c2410-clock.txt2
-rw-r--r--Documentation/devicetree/bindings/power_supply/axxia-reset.txt20
-rw-r--r--MAINTAINERS6
-rw-r--r--arch/arm/Kconfig24
-rw-r--r--arch/arm/Kconfig.debug104
-rw-r--r--arch/arm/Makefile2
-rw-r--r--arch/arm/boot/dts/Makefile10
-rw-r--r--arch/arm/boot/dts/at91-cosino_mega2560.dts5
-rw-r--r--arch/arm/boot/dts/at91-sama5d3_xplained.dts8
-rw-r--r--arch/arm/boot/dts/at91sam9261.dtsi23
-rw-r--r--arch/arm/boot/dts/at91sam9261ek.dts4
-rw-r--r--arch/arm/boot/dts/at91sam9rl.dtsi46
-rw-r--r--arch/arm/boot/dts/at91sam9rlek.dts9
-rw-r--r--arch/arm/boot/dts/axm5516-amarillo.dts51
-rw-r--r--arch/arm/boot/dts/axm5516-cpus.dtsi204
-rw-r--r--arch/arm/boot/dts/axm55xx.dtsi204
-rw-r--r--arch/arm/boot/dts/exynos4.dtsi18
-rw-r--r--arch/arm/boot/dts/exynos4210-universal_c210.dts15
-rw-r--r--arch/arm/boot/dts/exynos4210.dtsi18
-rw-r--r--arch/arm/boot/dts/exynos4412-trats2.dts79
-rw-r--r--arch/arm/boot/dts/exynos4x12.dtsi18
-rw-r--r--arch/arm/boot/dts/exynos5250.dtsi18
-rw-r--r--arch/arm/boot/dts/exynos5420-peach-pit.dts147
-rw-r--r--arch/arm/boot/dts/exynos5420-pinctrl.dtsi28
-rw-r--r--arch/arm/boot/dts/exynos5420.dtsi85
-rw-r--r--arch/arm/boot/dts/omap3-evm-37xx.dts9
-rw-r--r--arch/arm/boot/dts/omap3-ldp.dts4
-rw-r--r--arch/arm/boot/dts/omap3-n900.dts19
-rw-r--r--arch/arm/boot/dts/omap3.dtsi6
-rw-r--r--arch/arm/boot/dts/omap4-panda-common.dtsi15
-rw-r--r--arch/arm/boot/dts/omap4-sdp.dts6
-rw-r--r--arch/arm/boot/dts/omap4.dtsi6
-rw-r--r--arch/arm/boot/dts/orion5x-lacie-d2-network.dts236
-rw-r--r--arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts141
-rw-r--r--arch/arm/boot/dts/orion5x-maxtor-shared-storage-2.dts178
-rw-r--r--arch/arm/boot/dts/orion5x-mv88f5182.dtsi45
-rw-r--r--arch/arm/boot/dts/orion5x-rd88f5182-nas.dts177
-rw-r--r--arch/arm/boot/dts/orion5x.dtsi289
-rw-r--r--arch/arm/boot/dts/r8a7740.dtsi1
-rw-r--r--arch/arm/boot/dts/r8a7790.dtsi2
-rw-r--r--arch/arm/boot/dts/r8a7791.dtsi2
-rw-r--r--arch/arm/boot/dts/rk3066a.dtsi1
-rw-r--r--arch/arm/boot/dts/rk3188.dtsi1
-rw-r--r--arch/arm/boot/dts/sama5d3.dtsi61
-rw-r--r--arch/arm/boot/dts/sama5d3xcm.dtsi8
-rw-r--r--arch/arm/boot/dts/twl4030_omap3.dtsi19
-rw-r--r--arch/arm/boot/dts/zynq-7000.dtsi5
-rw-r--r--arch/arm/configs/at91sam9g45_defconfig3
-rw-r--r--arch/arm/configs/at91sam9rl_defconfig3
-rw-r--r--arch/arm/configs/axm55xx_defconfig248
-rw-r--r--arch/arm/configs/bcm_defconfig3
-rw-r--r--arch/arm/configs/imx_v4_v5_defconfig8
-rw-r--r--arch/arm/configs/imx_v6_v7_defconfig12
-rw-r--r--arch/arm/configs/mxs_defconfig7
-rw-r--r--arch/arm/configs/omap2plus_defconfig8
-rw-r--r--arch/arm/configs/sama5_defconfig1
-rw-r--r--arch/arm/include/debug/imx-uart.h11
-rw-r--r--arch/arm/include/debug/msm.S46
-rw-r--r--arch/arm/include/debug/vf.S15
-rw-r--r--arch/arm/include/debug/zynq.S10
-rw-r--r--arch/arm/mach-at91/at91rm9200_devices.c1
-rw-r--r--arch/arm/mach-at91/at91sam9260_devices.c12
-rw-r--r--arch/arm/mach-at91/at91sam9261_devices.c2
-rw-r--r--arch/arm/mach-at91/at91sam9263_devices.c1
-rw-r--r--arch/arm/mach-at91/at91sam9g45.c2
-rw-r--r--arch/arm/mach-at91/at91sam9g45_devices.c64
-rw-r--r--arch/arm/mach-at91/at91sam9rl.c7
-rw-r--r--arch/arm/mach-at91/at91sam9rl_devices.c84
-rw-r--r--arch/arm/mach-at91/board-1arm.c2
-rw-r--r--arch/arm/mach-at91/board-afeb-9260v1.c1
-rw-r--r--arch/arm/mach-at91/board-cam60.c1
-rw-r--r--arch/arm/mach-at91/board-carmeva.c1
-rw-r--r--arch/arm/mach-at91/board-cpu9krea.c1
-rw-r--r--arch/arm/mach-at91/board-cpuat91.c2
-rw-r--r--arch/arm/mach-at91/board-csb337.c2
-rw-r--r--arch/arm/mach-at91/board-csb637.c1
-rw-r--r--arch/arm/mach-at91/board-eb9200.c1
-rw-r--r--arch/arm/mach-at91/board-ecbat91.c1
-rw-r--r--arch/arm/mach-at91/board-eco920.c2
-rw-r--r--arch/arm/mach-at91/board-flexibity.c1
-rw-r--r--arch/arm/mach-at91/board-foxg20.c1
-rw-r--r--arch/arm/mach-at91/board-gsia18s.c1
-rw-r--r--arch/arm/mach-at91/board-kafa.c1
-rw-r--r--arch/arm/mach-at91/board-kb9202.c1
-rw-r--r--arch/arm/mach-at91/board-pcontrol-g20.c1
-rw-r--r--arch/arm/mach-at91/board-picotux200.c1
-rw-r--r--arch/arm/mach-at91/board-rm9200ek.c1
-rw-r--r--arch/arm/mach-at91/board-rsi-ews.c1
-rw-r--r--arch/arm/mach-at91/board-sam9-l9260.c1
-rw-r--r--arch/arm/mach-at91/board-sam9260ek.c1
-rw-r--r--arch/arm/mach-at91/board-sam9261ek.c1
-rw-r--r--arch/arm/mach-at91/board-sam9263ek.c1
-rw-r--r--arch/arm/mach-at91/board-sam9g20ek.c1
-rw-r--r--arch/arm/mach-at91/board-sam9m10g45ek.c17
-rw-r--r--arch/arm/mach-at91/board-sam9rlek.c17
-rw-r--r--arch/arm/mach-at91/board-snapper9260.c1
-rw-r--r--arch/arm/mach-at91/board-stamp9g20.c1
-rw-r--r--arch/arm/mach-at91/board-yl-9200.c1
-rw-r--r--arch/arm/mach-at91/board.h3
-rw-r--r--arch/arm/mach-at91/gpio.c1
-rw-r--r--arch/arm/mach-at91/gpio.h (renamed from arch/arm/mach-at91/include/mach/gpio.h)8
-rw-r--r--arch/arm/mach-at91/include/mach/at91_adc.h107
-rw-r--r--arch/arm/mach-at91/include/mach/hardware.h15
-rw-r--r--arch/arm/mach-at91/leds.c1
-rw-r--r--arch/arm/mach-at91/pm.c1
-rw-r--r--arch/arm/mach-axxia/Kconfig16
-rw-r--r--arch/arm/mach-axxia/Makefile2
-rw-r--r--arch/arm/mach-axxia/axxia.c28
-rw-r--r--arch/arm/mach-axxia/platsmp.c89
-rw-r--r--arch/arm/mach-bcm/Kconfig12
-rw-r--r--arch/arm/mach-berlin/Kconfig10
-rw-r--r--arch/arm/mach-dove/irq.c36
-rw-r--r--arch/arm/mach-exynos/Kconfig100
-rw-r--r--arch/arm/mach-exynos/Makefile6
-rw-r--r--arch/arm/mach-exynos/common.h36
-rw-r--r--arch/arm/mach-exynos/exynos.c70
-rw-r--r--arch/arm/mach-exynos/firmware.c16
-rw-r--r--arch/arm/mach-exynos/hotplug.c2
-rw-r--r--arch/arm/mach-exynos/include/mach/map.h7
-rw-r--r--arch/arm/mach-exynos/mcpm-exynos.c357
-rw-r--r--arch/arm/mach-exynos/platsmp.c67
-rw-r--r--arch/arm/mach-exynos/pm.c66
-rw-r--r--arch/arm/mach-exynos/regs-pmu.h16
-rw-r--r--arch/arm/mach-imx/Kconfig69
-rw-r--r--arch/arm/mach-imx/Makefile6
-rw-r--r--arch/arm/mach-imx/avic.c4
-rw-r--r--arch/arm/mach-imx/clk-gate2.c47
-rw-r--r--arch/arm/mach-imx/clk-imx1.c41
-rw-r--r--arch/arm/mach-imx/clk-imx25.c24
-rw-r--r--arch/arm/mach-imx/clk-imx27.c27
-rw-r--r--arch/arm/mach-imx/clk-imx31.c2
-rw-r--r--arch/arm/mach-imx/clk-imx51-imx53.c20
-rw-r--r--arch/arm/mach-imx/clk-imx6q.c21
-rw-r--r--arch/arm/mach-imx/clk-imx6sl.c6
-rw-r--r--arch/arm/mach-imx/clk-imx6sx.c524
-rw-r--r--arch/arm/mach-imx/clk.h13
-rw-r--r--arch/arm/mach-imx/common.h15
-rw-r--r--arch/arm/mach-imx/cpu.c3
-rw-r--r--arch/arm/mach-imx/devices/platform-mx2-emma.c2
-rw-r--r--arch/arm/mach-imx/eukrea_mbimxsd51-baseboard.c231
-rw-r--r--arch/arm/mach-imx/imx25-dt.c1
-rw-r--r--arch/arm/mach-imx/imx27-dt.c1
-rw-r--r--arch/arm/mach-imx/imx31-dt.c1
-rw-r--r--arch/arm/mach-imx/imx35-dt.c1
-rw-r--r--arch/arm/mach-imx/imx51-dt.c1
-rw-r--r--arch/arm/mach-imx/mach-apf9328.c1
-rw-r--r--arch/arm/mach-imx/mach-armadillo5x0.c1
-rw-r--r--arch/arm/mach-imx/mach-bug.c1
-rw-r--r--arch/arm/mach-imx/mach-cpuimx27.c1
-rw-r--r--arch/arm/mach-imx/mach-cpuimx35.c1
-rw-r--r--arch/arm/mach-imx/mach-cpuimx51sd.c364
-rw-r--r--arch/arm/mach-imx/mach-eukrea_cpuimx25.c1
-rw-r--r--arch/arm/mach-imx/mach-imx27_visstrim_m10.c1
-rw-r--r--arch/arm/mach-imx/mach-imx27ipcam.c1
-rw-r--r--arch/arm/mach-imx/mach-imx27lite.c1
-rw-r--r--arch/arm/mach-imx/mach-imx50.c1
-rw-r--r--arch/arm/mach-imx/mach-imx53.c1
-rw-r--r--arch/arm/mach-imx/mach-imx6sx.c51
-rw-r--r--arch/arm/mach-imx/mach-kzm_arm11_01.c1
-rw-r--r--arch/arm/mach-imx/mach-mx1ads.c2
-rw-r--r--arch/arm/mach-imx/mach-mx21ads.c174
-rw-r--r--arch/arm/mach-imx/mach-mx25_3ds.c1
-rw-r--r--arch/arm/mach-imx/mach-mx27_3ds.c1
-rw-r--r--arch/arm/mach-imx/mach-mx27ads.c1
-rw-r--r--arch/arm/mach-imx/mach-mx31_3ds.c1
-rw-r--r--arch/arm/mach-imx/mach-mx31ads.c1
-rw-r--r--arch/arm/mach-imx/mach-mx31lilly.c1
-rw-r--r--arch/arm/mach-imx/mach-mx31lite.c1
-rw-r--r--arch/arm/mach-imx/mach-mx31moboard.c1
-rw-r--r--arch/arm/mach-imx/mach-mx35_3ds.c1
-rw-r--r--arch/arm/mach-imx/mach-mx51_babbage.c428
-rw-r--r--arch/arm/mach-imx/mach-mxt_td60.c1
-rw-r--r--arch/arm/mach-imx/mach-pca100.c4
-rw-r--r--arch/arm/mach-imx/mach-pcm037.c1
-rw-r--r--arch/arm/mach-imx/mach-pcm038.c1
-rw-r--r--arch/arm/mach-imx/mach-pcm043.c1
-rw-r--r--arch/arm/mach-imx/mach-qong.c1
-rw-r--r--arch/arm/mach-imx/mach-scb9328.c1
-rw-r--r--arch/arm/mach-imx/mach-vpr200.c1
-rw-r--r--arch/arm/mach-imx/mxc.h6
-rw-r--r--arch/arm/mach-imx/time.c15
-rw-r--r--arch/arm/mach-imx/tzic.c4
-rw-r--r--arch/arm/mach-kirkwood/board-dt.c2
-rw-r--r--arch/arm/mach-kirkwood/irq.c37
-rw-r--r--arch/arm/mach-msm/Kconfig3
-rw-r--r--arch/arm/mach-mvebu/Kconfig14
-rw-r--r--arch/arm/mach-mvebu/Makefile13
-rw-r--r--arch/arm/mach-mvebu/armada-370-xp.h2
-rw-r--r--arch/arm/mach-mvebu/board-t5325.c41
-rw-r--r--arch/arm/mach-mvebu/board-v7.c82
-rw-r--r--arch/arm/mach-mvebu/board.h6
-rw-r--r--arch/arm/mach-mvebu/coherency.c340
-rw-r--r--arch/arm/mach-mvebu/coherency.h3
-rw-r--r--arch/arm/mach-mvebu/coherency_ll.S143
-rw-r--r--arch/arm/mach-mvebu/common.h3
-rw-r--r--arch/arm/mach-mvebu/cpu-reset.c103
-rw-r--r--arch/arm/mach-mvebu/dove.c2
-rw-r--r--arch/arm/mach-mvebu/headsmp-a9.S34
-rw-r--r--arch/arm/mach-mvebu/headsmp.S15
-rw-r--r--arch/arm/mach-mvebu/kirkwood.c5
-rw-r--r--arch/arm/mach-mvebu/mvebu-soc-id.c32
-rw-r--r--arch/arm/mach-mvebu/mvebu-soc-id.h4
-rw-r--r--arch/arm/mach-mvebu/platsmp-a9.c102
-rw-r--r--arch/arm/mach-mvebu/platsmp.c23
-rw-r--r--arch/arm/mach-mvebu/pmsu.c273
-rw-r--r--arch/arm/mach-mvebu/system-controller.c15
-rw-r--r--arch/arm/mach-omap2/id.c37
-rw-r--r--arch/arm/mach-omap2/io.c1
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_44xx_data.c99
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_54xx_data.c283
-rw-r--r--arch/arm/mach-omap2/omap_twl.c60
-rw-r--r--arch/arm/mach-omap2/pm.c45
-rw-r--r--arch/arm/mach-omap2/pm.h8
-rw-r--r--arch/arm/mach-omap2/pm24xx.c4
-rw-r--r--arch/arm/mach-omap2/pm34xx.c11
-rw-r--r--arch/arm/mach-omap2/pm44xx.c6
-rw-r--r--arch/arm/mach-omap2/prm-regbits-34xx.h11
-rw-r--r--arch/arm/mach-omap2/soc.h5
-rw-r--r--arch/arm/mach-omap2/vc.c232
-rw-r--r--arch/arm/mach-omap2/vc.h3
-rw-r--r--arch/arm/mach-orion5x/Kconfig37
-rw-r--r--arch/arm/mach-orion5x/Makefile7
-rw-r--r--arch/arm/mach-orion5x/board-d2net.c109
-rw-r--r--arch/arm/mach-orion5x/board-dt.c18
-rw-r--r--arch/arm/mach-orion5x/board-mss2.c90
-rw-r--r--arch/arm/mach-orion5x/board-rd88f5182.c116
-rw-r--r--arch/arm/mach-orion5x/common.h13
-rw-r--r--arch/arm/mach-orion5x/d2net-setup.c365
-rw-r--r--arch/arm/mach-orion5x/edmini_v2-setup.c169
-rw-r--r--arch/arm/mach-orion5x/irq.c28
-rw-r--r--arch/arm/mach-orion5x/mss2-setup.c274
-rw-r--r--arch/arm/mach-qcom/Kconfig2
-rw-r--r--arch/arm/mach-rockchip/core.h2
-rw-r--r--arch/arm/mach-rockchip/platsmp.c3
-rw-r--r--arch/arm/mach-rockchip/rockchip.c1
-rw-r--r--arch/arm/mach-s3c24xx/Kconfig37
-rw-r--r--arch/arm/mach-shmobile/Kconfig13
-rw-r--r--arch/arm/mach-shmobile/Makefile3
-rw-r--r--arch/arm/mach-shmobile/board-armadillo800eva-reference.c2
-rw-r--r--arch/arm/mach-shmobile/board-koelsch-reference.c2
-rw-r--r--arch/arm/mach-shmobile/board-koelsch.c2
-rw-r--r--arch/arm/mach-shmobile/clock-emev2.c231
-rw-r--r--arch/arm/mach-shmobile/clock-r8a7740.c2
-rw-r--r--arch/arm/mach-shmobile/clock-r8a7778.c22
-rw-r--r--arch/arm/mach-shmobile/clock-r8a7790.c32
-rw-r--r--arch/arm/mach-shmobile/clock-r8a7791.c23
-rw-r--r--arch/arm/mach-shmobile/clock.c28
-rw-r--r--arch/arm/mach-shmobile/include/mach/clock.h16
-rw-r--r--arch/arm/mach-shmobile/include/mach/common.h1
-rw-r--r--arch/arm/mach-shmobile/include/mach/emev2.h9
-rw-r--r--arch/arm/mach-shmobile/include/mach/r8a7740.h1
-rw-r--r--arch/arm/mach-shmobile/include/mach/r8a7791.h1
-rw-r--r--arch/arm/mach-shmobile/pm-rmobile.c38
-rw-r--r--arch/arm/mach-shmobile/setup-emev2.c11
-rw-r--r--arch/arm/mach-shmobile/setup-r8a7740.c8
-rw-r--r--arch/arm/mach-shmobile/setup-r8a7790.c12
-rw-r--r--arch/arm/mach-shmobile/setup-r8a7791.c9
-rw-r--r--arch/arm/mach-shmobile/setup-rcar-gen2.c16
-rw-r--r--arch/arm/mach-shmobile/smp-emev2.c1
-rw-r--r--arch/arm/mach-shmobile/smp-r8a7791.c15
-rw-r--r--arch/arm/mach-shmobile/timer.c45
-rw-r--r--arch/arm/mach-sti/board-dt.c1
-rw-r--r--arch/arm/mach-sunxi/Kconfig38
-rw-r--r--arch/arm/mach-sunxi/common.h19
-rw-r--r--arch/arm/mach-sunxi/platsmp.c3
-rw-r--r--arch/arm/mach-sunxi/sunxi.c113
-rw-r--r--arch/arm/mach-tegra/pmc.c24
-rw-r--r--arch/arm/mach-zynq/Kconfig10
-rw-r--r--arch/arm/mach-zynq/common.c71
-rw-r--r--arch/arm/mach-zynq/common.h1
-rw-r--r--arch/arm/mach-zynq/headsmp.S5
-rw-r--r--arch/arm/mach-zynq/slcr.c19
-rw-r--r--arch/arm/plat-orion/gpio.c48
-rw-r--r--arch/arm/plat-orion/include/plat/irq.h1
-rw-r--r--arch/arm/plat-orion/include/plat/orion-gpio.h1
-rw-r--r--arch/arm/plat-orion/irq.c77
-rw-r--r--arch/arm/plat-samsung/Makefile3
-rw-r--r--drivers/bus/mvebu-mbus.c11
-rw-r--r--drivers/clk/Kconfig2
-rw-r--r--drivers/clk/Makefile2
-rw-r--r--drivers/clk/at91/Makefile4
-rw-r--r--drivers/clk/at91/clk-main.c577
-rw-r--r--drivers/clk/at91/clk-slow.c467
-rw-r--r--drivers/clk/at91/pmc.c17
-rw-r--r--drivers/clk/at91/pmc.h9
-rw-r--r--drivers/clk/at91/sckc.c57
-rw-r--r--drivers/clk/at91/sckc.h22
-rw-r--r--drivers/clk/samsung/Kconfig26
-rw-r--r--drivers/clk/samsung/Makefile3
-rw-r--r--drivers/clk/samsung/clk-exynos3250.c780
-rw-r--r--drivers/clk/samsung/clk-exynos4.c51
-rw-r--r--drivers/clk/samsung/clk-exynos5250.c76
-rw-r--r--drivers/clk/samsung/clk-exynos5260.c1980
-rw-r--r--drivers/clk/samsung/clk-exynos5260.h459
-rw-r--r--drivers/clk/samsung/clk-exynos5410.c209
-rw-r--r--drivers/clk/samsung/clk-exynos5420.c1127
-rw-r--r--drivers/clk/samsung/clk-exynos5440.c18
-rw-r--r--drivers/clk/samsung/clk-pll.c223
-rw-r--r--drivers/clk/samsung/clk-pll.h2
-rw-r--r--drivers/clk/samsung/clk-s3c2410.c51
-rw-r--r--drivers/clk/samsung/clk-s3c2412.c29
-rw-r--r--drivers/clk/samsung/clk-s3c2443.c46
-rw-r--r--drivers/clk/samsung/clk-s3c64xx.c44
-rw-r--r--drivers/clk/samsung/clk.c123
-rw-r--r--drivers/clk/samsung/clk.h72
-rw-r--r--drivers/clocksource/cadence_ttc_timer.c54
-rw-r--r--drivers/cpuidle/Kconfig.arm5
-rw-r--r--drivers/cpuidle/Makefile1
-rw-r--r--drivers/cpuidle/cpuidle-armada-370-xp.c93
-rw-r--r--drivers/iio/adc/at91_adc.c340
-rw-r--r--drivers/input/touchscreen/Kconfig12
-rw-r--r--drivers/input/touchscreen/Makefile1
-rw-r--r--drivers/input/touchscreen/atmel_tsadcc.c358
-rw-r--r--drivers/irqchip/irq-armada-370-xp.c24
-rw-r--r--drivers/irqchip/irq-orion.c4
-rw-r--r--drivers/mfd/twl-core.c15
-rw-r--r--drivers/power/reset/Kconfig8
-rw-r--r--drivers/power/reset/Makefile1
-rw-r--r--drivers/power/reset/axxia-reset.c88
-rw-r--r--include/dt-bindings/clock/exynos3250.h258
-rw-r--r--include/dt-bindings/clock/exynos4.h2
-rw-r--r--include/dt-bindings/clock/exynos5250.h21
-rw-r--r--include/dt-bindings/clock/exynos5260-clk.h469
-rw-r--r--include/dt-bindings/clock/exynos5410.h33
-rw-r--r--include/dt-bindings/clock/exynos5420.h43
-rw-r--r--include/dt-bindings/clock/imx6sx-clock.h256
-rw-r--r--include/dt-bindings/clock/lsi,axm5516-clks.h36
-rw-r--r--include/dt-bindings/clock/r8a7790-clock.h4
-rw-r--r--include/dt-bindings/clock/r8a7791-clock.h5
-rw-r--r--include/dt-bindings/pinctrl/omap.h12
-rw-r--r--include/linux/clk/at91_pmc.h1
-rw-r--r--include/linux/mbus.h2
-rw-r--r--include/linux/platform_data/at91_adc.h27
-rw-r--r--include/linux/platform_data/atmel.h7
-rw-r--r--sound/soc/atmel/sam9g20_wm8731.c1
353 files changed, 14662 insertions, 5149 deletions
diff --git a/Documentation/arm/Marvell/README b/Documentation/arm/Marvell/README
index 963ec445e15a..2cce5401e323 100644
--- a/Documentation/arm/Marvell/README
+++ b/Documentation/arm/Marvell/README
@@ -234,6 +234,11 @@ Berlin family (Digital Entertainment)
Core: Marvell PJ4B (ARMv7), Tauros3 L2CC
Homepage: http://www.marvell.com/digital-entertainment/armada-1500/
Product Brief: http://www.marvell.com/digital-entertainment/armada-1500/assets/Marvell-ARMADA-1500-Product-Brief.pdf
+ 88DE3114, Armada 1500 Pro
+ Design name: BG2-Q
+ Core: Quad Core ARM Cortex-A9, PL310 L2CC
+ Homepage: http://www.marvell.com/digital-entertainment/armada-1500-pro/
+ Product Brief: http://www.marvell.com/digital-entertainment/armada-1500-pro/assets/Marvell_ARMADA_1500_PRO-01_product_brief.pdf
88DE????
Design name: BG3
Core: ARM Cortex-A15, CA15 integrated L2CC
diff --git a/Documentation/arm/sti/stih407-overview.txt b/Documentation/arm/sti/stih407-overview.txt
new file mode 100644
index 000000000000..3343f32f58bc
--- /dev/null
+++ b/Documentation/arm/sti/stih407-overview.txt
@@ -0,0 +1,18 @@
+ STiH407 Overview
+ ================
+
+Introduction
+------------
+
+ The STiH407 is the new generation of SoC for Multi-HD, AVC set-top boxes
+ and server/connected client application for satellite, cable, terrestrial
+ and IP-STB markets.
+
+ Features
+ - ARM Cortex-A9 1.5 GHz dual core CPU (28nm)
+ - SATA2, USB 3.0, PCIe, Gbit Ethernet
+
+ Document Author
+ ---------------
+
+ Maxime Coquelin <maxime.coquelin@st.com>, (c) 2014 ST Microelectronics
diff --git a/Documentation/devicetree/bindings/arm/armada-370-xp-pmsu.txt b/Documentation/devicetree/bindings/arm/armada-370-xp-pmsu.txt
index 926b4d6aae7e..26799ef562df 100644
--- a/Documentation/devicetree/bindings/arm/armada-370-xp-pmsu.txt
+++ b/Documentation/devicetree/bindings/arm/armada-370-xp-pmsu.txt
@@ -1,20 +1,21 @@
Power Management Service Unit(PMSU)
-----------------------------------
-Available on Marvell SOCs: Armada 370 and Armada XP
+Available on Marvell SOCs: Armada 370, Armada 38x and Armada XP
Required properties:
-- compatible: "marvell,armada-370-xp-pmsu"
+- compatible: should be one of:
+ - "marvell,armada-370-pmsu" for Armada 370 or Armada XP
+ - "marvell,armada-380-pmsu" for Armada 38x
+ - "marvell,armada-370-xp-pmsu" was used for Armada 370/XP but is now
+ deprecated and will be removed
-- reg: Should contain PMSU registers location and length. First pair
- for the per-CPU SW Reset Control registers, second pair for the
- Power Management Service Unit.
+- reg: Should contain PMSU registers location and length.
Example:
-armada-370-xp-pmsu@d0022000 {
- compatible = "marvell,armada-370-xp-pmsu";
- reg = <0xd0022100 0x430>,
- <0xd0020800 0x20>;
+armada-370-xp-pmsu@22000 {
+ compatible = "marvell,armada-370-pmsu";
+ reg = <0x22000 0x1000>;
};
diff --git a/Documentation/devicetree/bindings/arm/armada-cpu-reset.txt b/Documentation/devicetree/bindings/arm/armada-cpu-reset.txt
new file mode 100644
index 000000000000..b63a7b6ab998
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/armada-cpu-reset.txt
@@ -0,0 +1,14 @@
+Marvell Armada CPU reset controller
+===================================
+
+Required properties:
+
+- compatible: Should be "marvell,armada-370-cpu-reset".
+
+- reg: should be register base and length as documented in the
+ datasheet for the CPU reset registers
+
+cpurst: cpurst@20800 {
+ compatible = "marvell,armada-370-cpu-reset";
+ reg = <0x20800 0x20>;
+};
diff --git a/Documentation/devicetree/bindings/arm/axxia.txt b/Documentation/devicetree/bindings/arm/axxia.txt
new file mode 100644
index 000000000000..7b4ef9c07696
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/axxia.txt
@@ -0,0 +1,12 @@
+Axxia AXM55xx device tree bindings
+
+Boards using the AXM55xx SoC need to have the following properties:
+
+Required root node property:
+
+ - compatible = "lsi,axm5516"
+
+Boards:
+
+ LSI AXM5516 Validation board (Amarillo)
+ compatible = "lsi,axm5516-amarillo", "lsi,axm5516"
diff --git a/Documentation/devicetree/bindings/arm/coherency-fabric.txt b/Documentation/devicetree/bindings/arm/coherency-fabric.txt
index 17d8cd107559..8dd46617c889 100644
--- a/Documentation/devicetree/bindings/arm/coherency-fabric.txt
+++ b/Documentation/devicetree/bindings/arm/coherency-fabric.txt
@@ -1,16 +1,33 @@
Coherency fabric
----------------
-Available on Marvell SOCs: Armada 370 and Armada XP
+Available on Marvell SOCs: Armada 370, Armada 375, Armada 38x and Armada XP
Required properties:
-- compatible: "marvell,coherency-fabric"
+- compatible: the possible values are:
+
+ * "marvell,coherency-fabric", to be used for the coherency fabric of
+ the Armada 370 and Armada XP.
+
+ * "marvell,armada-375-coherency-fabric", for the Armada 375 coherency
+ fabric.
+
+ * "marvell,armada-380-coherency-fabric", for the Armada 38x coherency
+ fabric.
- reg: Should contain coherency fabric registers location and
- length. First pair for the coherency fabric registers, second pair
- for the per-CPU fabric registers registers.
+ length.
+
+ * For "marvell,coherency-fabric", the first pair for the coherency
+ fabric registers, second pair for the per-CPU fabric registers.
-Example:
+ * For "marvell,armada-375-coherency-fabric", only one pair is needed
+ for the per-CPU fabric registers.
+
+ * For "marvell,armada-380-coherency-fabric", only one pair is needed
+ for the per-CPU fabric registers.
+
+Examples:
coherency-fabric@d0020200 {
compatible = "marvell,coherency-fabric";
@@ -19,3 +36,8 @@ coherency-fabric@d0020200 {
};
+coherency-fabric@21810 {
+ compatible = "marvell,armada-375-coherency-fabric";
+ reg = <0x21810 0x1c>;
+};
+
diff --git a/Documentation/devicetree/bindings/arm/cpus.txt b/Documentation/devicetree/bindings/arm/cpus.txt
index 333f4aea3029..1fe72a0778cd 100644
--- a/Documentation/devicetree/bindings/arm/cpus.txt
+++ b/Documentation/devicetree/bindings/arm/cpus.txt
@@ -178,13 +178,19 @@ nodes to be present and contain the properties described below.
Usage and definition depend on ARM architecture version.
# On ARM v8 64-bit this property is required and must
be one of:
- "spin-table"
"psci"
+ "spin-table"
# On ARM 32-bit systems this property is optional and
can be one of:
+ "allwinner,sun6i-a31"
+ "arm,psci"
+ "marvell,armada-375-smp"
+ "marvell,armada-380-smp"
+ "marvell,armada-xp-smp"
"qcom,gcc-msm8660"
"qcom,kpss-acc-v1"
"qcom,kpss-acc-v2"
+ "rockchip,rk3066-smp"
- cpu-release-addr
Usage: required for systems that have an "enable-method"
diff --git a/Documentation/devicetree/bindings/arm/exynos/smp-sysram.txt b/Documentation/devicetree/bindings/arm/exynos/smp-sysram.txt
new file mode 100644
index 000000000000..4a0a4f70a0ce
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/exynos/smp-sysram.txt
@@ -0,0 +1,38 @@
+Samsung Exynos SYSRAM for SMP bringup:
+------------------------------------
+
+Samsung SMP-capable Exynos SoCs use part of the SYSRAM for the bringup
+of the secondary cores. Once the core gets powered up it executes the
+code that is residing at some specific location of the SYSRAM.
+
+Therefore reserved section sub-nodes have to be added to the mmio-sram
+declaration. These nodes are of two types depending upon secure or
+non-secure execution environment.
+
+Required sub-node properties:
+- compatible : depending upon boot mode, should be
+ "samsung,exynos4210-sysram" : for Secure SYSRAM
+ "samsung,exynos4210-sysram-ns" : for Non-secure SYSRAM
+
+The rest of the properties should follow the generic mmio-sram discription
+found in ../../misc/sysram.txt
+
+Example:
+
+ sysram@02020000 {
+ compatible = "mmio-sram";
+ reg = <0x02020000 0x54000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x02020000 0x54000>;
+
+ smp-sysram@0 {
+ compatible = "samsung,exynos4210-sysram";
+ reg = <0x0 0x1000>;
+ };
+
+ smp-sysram@53000 {
+ compatible = "samsung,exynos4210-sysram-ns";
+ reg = <0x53000 0x1000>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/arm/sti.txt b/Documentation/devicetree/bindings/arm/sti.txt
new file mode 100644
index 000000000000..92f16c78bb69
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/sti.txt
@@ -0,0 +1,15 @@
+ST STi Platforms Device Tree Bindings
+---------------------------------------
+
+Boards with the ST STiH415 SoC shall have the following properties:
+Required root node property:
+compatible = "st,stih415";
+
+Boards with the ST STiH416 SoC shall have the following properties:
+Required root node property:
+compatible = "st,stih416";
+
+Boards with the ST STiH407 SoC shall have the following properties:
+Required root node property:
+compatible = "st,stih407";
+
diff --git a/Documentation/devicetree/bindings/clock/at91-clock.txt b/Documentation/devicetree/bindings/clock/at91-clock.txt
index 6794cdc96d8f..b3d544ca522a 100644
--- a/Documentation/devicetree/bindings/clock/at91-clock.txt
+++ b/Documentation/devicetree/bindings/clock/at91-clock.txt
@@ -6,6 +6,16 @@ This binding uses the common clock binding[1].
Required properties:
- compatible : shall be one of the following:
+ "atmel,at91sam9x5-sckc":
+ at91 SCKC (Slow Clock Controller)
+ This node contains the slow clock definitions.
+
+ "atmel,at91sam9x5-clk-slow-osc":
+ at91 slow oscillator
+
+ "atmel,at91sam9x5-clk-slow-rc-osc":
+ at91 internal slow RC oscillator
+
"atmel,at91rm9200-pmc" or
"atmel,at91sam9g45-pmc" or
"atmel,at91sam9n12-pmc" or
@@ -15,8 +25,18 @@ Required properties:
All at91 specific clocks (clocks defined below) must be child
node of the PMC node.
+ "atmel,at91sam9x5-clk-slow" (under sckc node)
+ or
+ "atmel,at91sam9260-clk-slow" (under pmc node):
+ at91 slow clk
+
+ "atmel,at91rm9200-clk-main-osc"
+ "atmel,at91sam9x5-clk-main-rc-osc"
+ at91 main clk sources
+
+ "atmel,at91sam9x5-clk-main"
"atmel,at91rm9200-clk-main":
- at91 main oscillator
+ at91 main clock
"atmel,at91rm9200-clk-master" or
"atmel,at91sam9x5-clk-master":
@@ -54,6 +74,63 @@ Required properties:
"atmel,at91sam9x5-clk-utmi":
at91 utmi clock
+Required properties for SCKC node:
+- reg : defines the IO memory reserved for the SCKC.
+- #size-cells : shall be 0 (reg is used to encode clk id).
+- #address-cells : shall be 1 (reg is used to encode clk id).
+
+
+For example:
+ sckc: sckc@fffffe50 {
+ compatible = "atmel,sama5d3-pmc";
+ reg = <0xfffffe50 0x4>
+ #size-cells = <0>;
+ #address-cells = <1>;
+
+ /* put at91 slow clocks here */
+ };
+
+
+Required properties for internal slow RC oscillator:
+- #clock-cells : from common clock binding; shall be set to 0.
+- clock-frequency : define the internal RC oscillator frequency.
+
+Optional properties:
+- clock-accuracy : define the internal RC oscillator accuracy.
+
+For example:
+ slow_rc_osc: slow_rc_osc {
+ compatible = "atmel,at91sam9x5-clk-slow-rc-osc";
+ clock-frequency = <32768>;
+ clock-accuracy = <50000000>;
+ };
+
+Required properties for slow oscillator:
+- #clock-cells : from common clock binding; shall be set to 0.
+- clocks : shall encode the main osc source clk sources (see atmel datasheet).
+
+Optional properties:
+- atmel,osc-bypass : boolean property. Set this when a clock signal is directly
+ provided on XIN.
+
+For example:
+ slow_osc: slow_osc {
+ compatible = "atmel,at91rm9200-clk-slow-osc";
+ #clock-cells = <0>;
+ clocks = <&slow_xtal>;
+ };
+
+Required properties for slow clock:
+- #clock-cells : from common clock binding; shall be set to 0.
+- clocks : shall encode the slow clk sources (see atmel datasheet).
+
+For example:
+ clk32k: slck {
+ compatible = "atmel,at91sam9x5-clk-slow";
+ #clock-cells = <0>;
+ clocks = <&slow_rc_osc &slow_osc>;
+ };
+
Required properties for PMC node:
- reg : defines the IO memory reserved for the PMC.
- #size-cells : shall be 0 (reg is used to encode clk id).
@@ -85,24 +162,57 @@ For example:
/* put at91 clocks here */
};
+Required properties for main clock internal RC oscillator:
+- interrupt-parent : must reference the PMC node.
+- interrupts : shall be set to "<0>".
+- clock-frequency : define the internal RC oscillator frequency.
+
+Optional properties:
+- clock-accuracy : define the internal RC oscillator accuracy.
+
+For example:
+ main_rc_osc: main_rc_osc {
+ compatible = "atmel,at91sam9x5-clk-main-rc-osc";
+ interrupt-parent = <&pmc>;
+ interrupts = <0>;
+ clock-frequency = <12000000>;
+ clock-accuracy = <50000000>;
+ };
+
+Required properties for main clock oscillator:
+- interrupt-parent : must reference the PMC node.
+- interrupts : shall be set to "<0>".
+- #clock-cells : from common clock binding; shall be set to 0.
+- clocks : shall encode the main osc source clk sources (see atmel datasheet).
+
+Optional properties:
+- atmel,osc-bypass : boolean property. Specified if a clock signal is provided
+ on XIN.
+
+ clock signal is directly provided on XIN pin.
+
+For example:
+ main_osc: main_osc {
+ compatible = "atmel,at91rm9200-clk-main-osc";
+ interrupt-parent = <&pmc>;
+ interrupts = <0>;
+ #clock-cells = <0>;
+ clocks = <&main_xtal>;
+ };
+
Required properties for main clock:
- interrupt-parent : must reference the PMC node.
- interrupts : shall be set to "<0>".
- #clock-cells : from common clock binding; shall be set to 0.
-- clocks (optional if clock-frequency is provided) : shall be the slow clock
- phandle. This clock is used to calculate the main clock rate if
- "clock-frequency" is not provided.
-- clock-frequency : the main oscillator frequency.Prefer the use of
- "clock-frequency" over automatic clock rate calculation.
+- clocks : shall encode the main clk sources (see atmel datasheet).
For example:
main: mainck {
- compatible = "atmel,at91rm9200-clk-main";
+ compatible = "atmel,at91sam9x5-clk-main";
interrupt-parent = <&pmc>;
interrupts = <0>;
#clock-cells = <0>;
- clocks = <&ck32k>;
- clock-frequency = <18432000>;
+ clocks = <&main_rc_osc &main_osc>;
};
Required properties for master clock:
diff --git a/Documentation/devicetree/bindings/clock/exynos3250-clock.txt b/Documentation/devicetree/bindings/clock/exynos3250-clock.txt
new file mode 100644
index 000000000000..aadc9c59e2d1
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/exynos3250-clock.txt
@@ -0,0 +1,41 @@
+* Samsung Exynos3250 Clock Controller
+
+The Exynos3250 clock controller generates and supplies clock to various
+controllers within the Exynos3250 SoC.
+
+Required Properties:
+
+- compatible: should be one of the following.
+ - "samsung,exynos3250-cmu" - controller compatible with Exynos3250 SoC.
+
+- reg: physical base address of the controller and length of memory mapped
+ region.
+
+- #clock-cells: should be 1.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume.
+
+All available clocks are defined as preprocessor macros in
+dt-bindings/clock/exynos3250.h header and can be used in device
+tree sources.
+
+Example 1: An example of a clock controller node is listed below.
+
+ cmu: clock-controller@10030000 {
+ compatible = "samsung,exynos3250-cmu";
+ reg = <0x10030000 0x20000>;
+ #clock-cells = <1>;
+ };
+
+Example 2: UART controller node that consumes the clock generated by the clock
+ controller. Refer to the standard clock bindings for information
+ about 'clocks' and 'clock-names' property.
+
+ serial@13800000 {
+ compatible = "samsung,exynos4210-uart";
+ reg = <0x13800000 0x100>;
+ interrupts = <0 109 0>;
+ clocks = <&cmu CLK_UART0>, <&cmu CLK_SCLK_UART0>;
+ clock-names = "uart", "clk_uart_baud0";
+ };
diff --git a/Documentation/devicetree/bindings/clock/exynos5260-clock.txt b/Documentation/devicetree/bindings/clock/exynos5260-clock.txt
new file mode 100644
index 000000000000..5496b2fac483
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/exynos5260-clock.txt
@@ -0,0 +1,190 @@
+* Samsung Exynos5260 Clock Controller
+
+Exynos5260 has 13 clock controllers which are instantiated
+independently from the device-tree. These clock controllers
+generate and supply clocks to various hardware blocks within
+the SoC.
+
+Each clock is assigned an identifier and client nodes can use
+this identifier to specify the clock which they consume. All
+available clocks are defined as preprocessor macros in
+dt-bindings/clock/exynos5260-clk.h header and can be used in
+device tree sources.
+
+External clocks:
+
+There are several clocks that are generated outside the SoC. It
+is expected that they are defined using standard clock bindings
+with following clock-output-names:
+
+ - "fin_pll" - PLL input clock from XXTI
+ - "xrtcxti" - input clock from XRTCXTI
+ - "ioclk_pcm_extclk" - pcm external operation clock
+ - "ioclk_spdif_extclk" - spdif external operation clock
+ - "ioclk_i2s_cdclk" - i2s0 codec clock
+
+Phy clocks:
+
+There are several clocks which are generated by specific PHYs.
+These clocks are fed into the clock controller and then routed to
+the hardware blocks. These clocks are defined as fixed clocks in the
+driver with following names:
+
+ - "phyclk_dptx_phy_ch3_txd_clk" - dp phy clock for channel 3
+ - "phyclk_dptx_phy_ch2_txd_clk" - dp phy clock for channel 2
+ - "phyclk_dptx_phy_ch1_txd_clk" - dp phy clock for channel 1
+ - "phyclk_dptx_phy_ch0_txd_clk" - dp phy clock for channel 0
+ - "phyclk_hdmi_phy_tmds_clko" - hdmi phy tmds clock
+ - "phyclk_hdmi_phy_pixel_clko" - hdmi phy pixel clock
+ - "phyclk_hdmi_link_o_tmds_clkhi" - hdmi phy for hdmi link
+ - "phyclk_dptx_phy_o_ref_clk_24m" - dp phy reference clock
+ - "phyclk_dptx_phy_clk_div2"
+ - "phyclk_mipi_dphy_4l_m_rxclkesc0"
+ - "phyclk_usbhost20_phy_phyclock" - usb 2.0 phy clock
+ - "phyclk_usbhost20_phy_freeclk"
+ - "phyclk_usbhost20_phy_clk48mohci"
+ - "phyclk_usbdrd30_udrd30_pipe_pclk"
+ - "phyclk_usbdrd30_udrd30_phyclock" - usb 3.0 phy clock
+
+Required Properties for Clock Controller:
+
+ - compatible: should be one of the following.
+ 1) "samsung,exynos5260-clock-top"
+ 2) "samsung,exynos5260-clock-peri"
+ 3) "samsung,exynos5260-clock-egl"
+ 4) "samsung,exynos5260-clock-kfc"
+ 5) "samsung,exynos5260-clock-g2d"
+ 6) "samsung,exynos5260-clock-mif"
+ 7) "samsung,exynos5260-clock-mfc"
+ 8) "samsung,exynos5260-clock-g3d"
+ 9) "samsung,exynos5260-clock-fsys"
+ 10) "samsung,exynos5260-clock-aud"
+ 11) "samsung,exynos5260-clock-isp"
+ 12) "samsung,exynos5260-clock-gscl"
+ 13) "samsung,exynos5260-clock-disp"
+
+ - reg: physical base address of the controller and the length of
+ memory mapped region.
+
+ - #clock-cells: should be 1.
+
+ - clocks: list of clock identifiers which are fed as the input to
+ the given clock controller. Please refer the next section to find
+ the input clocks for a given controller.
+
+ - clock-names: list of names of clocks which are fed as the input
+ to the given clock controller.
+
+Input clocks for top clock controller:
+ - fin_pll
+ - dout_mem_pll
+ - dout_bus_pll
+ - dout_media_pll
+
+Input clocks for peri clock controller:
+ - fin_pll
+ - ioclk_pcm_extclk
+ - ioclk_i2s_cdclk
+ - ioclk_spdif_extclk
+ - phyclk_hdmi_phy_ref_cko
+ - dout_aclk_peri_66
+ - dout_sclk_peri_uart0
+ - dout_sclk_peri_uart1
+ - dout_sclk_peri_uart2
+ - dout_sclk_peri_spi0_b
+ - dout_sclk_peri_spi1_b
+ - dout_sclk_peri_spi2_b
+ - dout_aclk_peri_aud
+ - dout_sclk_peri_spi0_b
+
+Input clocks for egl clock controller:
+ - fin_pll
+ - dout_bus_pll
+
+Input clocks for kfc clock controller:
+ - fin_pll
+ - dout_media_pll
+
+Input clocks for g2d clock controller:
+ - fin_pll
+ - dout_aclk_g2d_333
+
+Input clocks for mif clock controller:
+ - fin_pll
+
+Input clocks for mfc clock controller:
+ - fin_pll
+ - dout_aclk_mfc_333
+
+Input clocks for g3d clock controller:
+ - fin_pll
+
+Input clocks for fsys clock controller:
+ - fin_pll
+ - phyclk_usbhost20_phy_phyclock
+ - phyclk_usbhost20_phy_freeclk
+ - phyclk_usbhost20_phy_clk48mohci
+ - phyclk_usbdrd30_udrd30_pipe_pclk
+ - phyclk_usbdrd30_udrd30_phyclock
+ - dout_aclk_fsys_200
+
+Input clocks for aud clock controller:
+ - fin_pll
+ - fout_aud_pll
+ - ioclk_i2s_cdclk
+ - ioclk_pcm_extclk
+
+Input clocks for isp clock controller:
+ - fin_pll
+ - dout_aclk_isp1_266
+ - dout_aclk_isp1_400
+ - mout_aclk_isp1_266
+
+Input clocks for gscl clock controller:
+ - fin_pll
+ - dout_aclk_gscl_400
+ - dout_aclk_gscl_333
+
+Input clocks for disp clock controller:
+ - fin_pll
+ - phyclk_dptx_phy_ch3_txd_clk
+ - phyclk_dptx_phy_ch2_txd_clk
+ - phyclk_dptx_phy_ch1_txd_clk
+ - phyclk_dptx_phy_ch0_txd_clk
+ - phyclk_hdmi_phy_tmds_clko
+ - phyclk_hdmi_phy_ref_clko
+ - phyclk_hdmi_phy_pixel_clko
+ - phyclk_hdmi_link_o_tmds_clkhi
+ - phyclk_mipi_dphy_4l_m_txbyte_clkhs
+ - phyclk_dptx_phy_o_ref_clk_24m
+ - phyclk_dptx_phy_clk_div2
+ - phyclk_mipi_dphy_4l_m_rxclkesc0
+ - phyclk_hdmi_phy_ref_cko
+ - ioclk_spdif_extclk
+ - dout_aclk_peri_aud
+ - dout_aclk_disp_222
+ - dout_sclk_disp_pixel
+ - dout_aclk_disp_333
+
+Example 1: An example of a clock controller node is listed below.
+
+ clock_mfc: clock-controller@11090000 {
+ compatible = "samsung,exynos5260-clock-mfc";
+ clock = <&fin_pll>, <&clock_top TOP_DOUT_ACLK_MFC_333>;
+ clock-names = "fin_pll", "dout_aclk_mfc_333";
+ reg = <0x11090000 0x10000>;
+ #clock-cells = <1>;
+ };
+
+Example 2: UART controller node that consumes the clock generated by the
+ peri clock controller. Refer to the standard clock bindings for
+ information about 'clocks' and 'clock-names' property.
+
+ serial@12C00000 {
+ compatible = "samsung,exynos4210-uart";
+ reg = <0x12C00000 0x100>;
+ interrupts = <0 146 0>;
+ clocks = <&clock_peri PERI_PCLK_UART0>, <&clock_peri PERI_SCLK_UART0>;
+ clock-names = "uart", "clk_uart_baud0";
+ };
+
diff --git a/Documentation/devicetree/bindings/clock/exynos5410-clock.txt b/Documentation/devicetree/bindings/clock/exynos5410-clock.txt
new file mode 100644
index 000000000000..aeab635b07b5
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/exynos5410-clock.txt
@@ -0,0 +1,45 @@
+* Samsung Exynos5410 Clock Controller
+
+The Exynos5410 clock controller generates and supplies clock to various
+controllers within the Exynos5410 SoC.
+
+Required Properties:
+
+- compatible: should be "samsung,exynos5410-clock"
+
+- reg: physical base address of the controller and length of memory mapped
+ region.
+
+- #clock-cells: should be 1.
+
+All available clocks are defined as preprocessor macros in
+dt-bindings/clock/exynos5410.h header and can be used in device
+tree sources.
+
+External clock:
+
+There is clock that is generated outside the SoC. It
+is expected that it is defined using standard clock bindings
+with following clock-output-name:
+
+ - "fin_pll" - PLL input clock from XXTI
+
+Example 1: An example of a clock controller node is listed below.
+
+ clock: clock-controller@0x10010000 {
+ compatible = "samsung,exynos5410-clock";
+ reg = <0x10010000 0x30000>;
+ #clock-cells = <1>;
+ };
+
+Example 2: UART controller node that consumes the clock generated by the clock
+ controller. Refer to the standard clock bindings for information
+ about 'clocks' and 'clock-names' property.
+
+ serial@12C20000 {
+ compatible = "samsung,exynos4210-uart";
+ reg = <0x12C00000 0x100>;
+ interrupts = <0 51 0>;
+ clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
+ clock-names = "uart", "clk_uart_baud0";
+ };
diff --git a/Documentation/devicetree/bindings/clock/exynos5420-clock.txt b/Documentation/devicetree/bindings/clock/exynos5420-clock.txt
index ca88c97a8562..d54f42cf0440 100644
--- a/Documentation/devicetree/bindings/clock/exynos5420-clock.txt
+++ b/Documentation/devicetree/bindings/clock/exynos5420-clock.txt
@@ -1,12 +1,13 @@
* Samsung Exynos5420 Clock Controller
The Exynos5420 clock controller generates and supplies clock to various
-controllers within the Exynos5420 SoC.
+controllers within the Exynos5420 SoC and for the Exynos5800 SoC.
Required Properties:
- compatible: should be one of the following.
- "samsung,exynos5420-clock" - controller compatible with Exynos5420 SoC.
+ - "samsung,exynos5800-clock" - controller compatible with Exynos5800 SoC.
- reg: physical base address of the controller and length of memory mapped
region.
diff --git a/Documentation/devicetree/bindings/clock/imx25-clock.txt b/Documentation/devicetree/bindings/clock/imx25-clock.txt
index db4f2f05c4d0..ba6b312ff8a5 100644
--- a/Documentation/devicetree/bindings/clock/imx25-clock.txt
+++ b/Documentation/devicetree/bindings/clock/imx25-clock.txt
@@ -139,6 +139,9 @@ clocks and IDs.
uart5_ipg 124
reserved 125
wdt_ipg 126
+ cko_div 127
+ cko_sel 128
+ cko 129
Examples:
diff --git a/Documentation/devicetree/bindings/clock/imx27-clock.txt b/Documentation/devicetree/bindings/clock/imx27-clock.txt
index 7a2070393732..6bc9fd2c6631 100644
--- a/Documentation/devicetree/bindings/clock/imx27-clock.txt
+++ b/Documentation/devicetree/bindings/clock/imx27-clock.txt
@@ -98,7 +98,12 @@ clocks and IDs.
fpm 83
mpll_osc_sel 84
mpll_sel 85
- spll_gate 86
+ spll_gate 86
+ mshc_div 87
+ rtic_ipg_gate 88
+ mshc_ipg_gate 89
+ rtic_ahb_gate 90
+ mshc_baud_gate 91
Examples:
diff --git a/Documentation/devicetree/bindings/clock/imx6q-clock.txt b/Documentation/devicetree/bindings/clock/imx6q-clock.txt
index 6aab72bf67ea..90ec91fe5ce0 100644
--- a/Documentation/devicetree/bindings/clock/imx6q-clock.txt
+++ b/Documentation/devicetree/bindings/clock/imx6q-clock.txt
@@ -220,6 +220,7 @@ clocks and IDs.
lvds2_sel 205
lvds1_gate 206
lvds2_gate 207
+ esai_ahb 208
Examples:
diff --git a/Documentation/devicetree/bindings/clock/imx6sx-clock.txt b/Documentation/devicetree/bindings/clock/imx6sx-clock.txt
new file mode 100644
index 000000000000..22362b9b7ba3
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx6sx-clock.txt
@@ -0,0 +1,13 @@
+* Clock bindings for Freescale i.MX6 SoloX
+
+Required properties:
+- compatible: Should be "fsl,imx6sx-ccm"
+- reg: Address and length of the register set
+- #clock-cells: Should be <1>
+- clocks: list of clock specifiers, must contain an entry for each required
+ entry in clock-names
+- clock-names: should include entries "ckil", "osc", "ipp_di0" and "ipp_di1"
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx6sx-clock.h
+for the full list of i.MX6 SoloX clock IDs.
diff --git a/Documentation/devicetree/bindings/clock/samsung,s3c2410-clock.txt b/Documentation/devicetree/bindings/clock/samsung,s3c2410-clock.txt
index 0b64ad8dadf6..822505e715ae 100644
--- a/Documentation/devicetree/bindings/clock/samsung,s3c2410-clock.txt
+++ b/Documentation/devicetree/bindings/clock/samsung,s3c2410-clock.txt
@@ -19,7 +19,7 @@ to specify the clock which they consume. Some of the clocks are available only
on a particular SoC.
All available clocks are defined as preprocessor macros in
-dt-bindings/clock/samsung,s3c2410-clock.h header and can be used in device
+dt-bindings/clock/s3c2410.h header and can be used in device
tree sources.
External clocks:
diff --git a/Documentation/devicetree/bindings/power_supply/axxia-reset.txt b/Documentation/devicetree/bindings/power_supply/axxia-reset.txt
new file mode 100644
index 000000000000..47e720d249d2
--- /dev/null
+++ b/Documentation/devicetree/bindings/power_supply/axxia-reset.txt
@@ -0,0 +1,20 @@
+Axxia Restart Driver
+
+This driver can do reset of the Axxia SoC. It uses the registers in the syscon
+block to initiate a chip reset.
+
+Required Properties:
+ -compatible: "lsi,axm55xx-reset"
+ -syscon: phandle to the syscon node.
+
+Example:
+
+ syscon: syscon@2010030000 {
+ compatible = "lsi,axxia-syscon", "syscon";
+ reg = <0x20 0x10030000 0 0x2000>;
+ };
+
+ reset: reset@2010031000 {
+ compatible = "lsi,axm55xx-reset";
+ syscon = <&syscon>;
+ };
diff --git a/MAINTAINERS b/MAINTAINERS
index b82ebe761b30..a4fe5ee8903f 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1617,12 +1617,6 @@ S: Supported
F: drivers/misc/atmel_tclib.c
F: drivers/clocksource/tcb_clksrc.c
-ATMEL TSADCC DRIVER
-M: Josh Wu <josh.wu@atmel.com>
-L: linux-input@vger.kernel.org
-S: Supported
-F: drivers/input/touchscreen/atmel_tsadcc.c
-
ATMEL USBA UDC DRIVER
M: Nicolas Ferre <nicolas.ferre@atmel.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 860bea828ac4..201f5e105484 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -377,7 +377,6 @@ config ARCH_AT91
select ARCH_REQUIRE_GPIOLIB
select CLKDEV_LOOKUP
select IRQ_DOMAIN
- select NEED_MACH_GPIO_H
select NEED_MACH_IO_H if PCCARD
select PINCTRL
select PINCTRL_AT91 if USE_OF
@@ -756,7 +755,7 @@ config ARCH_S3C64XX
select ATAGS
select CLKDEV_LOOKUP
select CLKSRC_SAMSUNG_PWM
- select COMMON_CLK
+ select COMMON_CLK_SAMSUNG
select CPU_V6K
select GENERIC_CLOCKEVENTS
select GPIO_SAMSUNG
@@ -830,25 +829,6 @@ config ARCH_S5PV210
help
Samsung S5PV210/S5PC110 series based systems
-config ARCH_EXYNOS
- bool "Samsung EXYNOS"
- select ARCH_HAS_CPUFREQ
- select ARCH_HAS_HOLES_MEMORYMODEL
- select ARCH_REQUIRE_GPIOLIB
- select ARCH_SPARSEMEM_ENABLE
- select ARM_GIC
- select COMMON_CLK
- select CPU_V7
- select GENERIC_CLOCKEVENTS
- select HAVE_S3C2410_I2C if I2C
- select HAVE_S3C2410_WATCHDOG if WATCHDOG
- select HAVE_S3C_RTC if RTC_CLASS
- select NEED_MACH_MEMORY_H
- select SPARSE_IRQ
- select USE_OF
- help
- Support for SAMSUNG's EXYNOS SoCs (EXYNOS4/5)
-
config ARCH_DAVINCI
bool "TI DaVinci"
select ARCH_HAS_HOLES_MEMORYMODEL
@@ -952,6 +932,8 @@ source "arch/arm/mach-mvebu/Kconfig"
source "arch/arm/mach-at91/Kconfig"
+source "arch/arm/mach-axxia/Kconfig"
+
source "arch/arm/mach-bcm/Kconfig"
source "arch/arm/mach-berlin/Kconfig"
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 4678870f8ee8..8f90595069a1 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -317,6 +317,13 @@ choice
Say Y here if you want kernel low-level debugging support
on i.MX6SL.
+ config DEBUG_IMX6SX_UART
+ bool "i.MX6SX Debug UART"
+ depends on SOC_IMX6SX
+ help
+ Say Y here if you want kernel low-level debugging support
+ on i.MX6SX.
+
config DEBUG_KEYSTONE_UART0
bool "Kernel low-level debugging on KEYSTONE2 using UART0"
depends on ARCH_KEYSTONE
@@ -349,56 +356,40 @@ choice
Say Y here if you want kernel low-level debugging support
on MMP UART3.
- config DEBUG_MSM_UART1
- bool "Kernel low-level debugging messages via MSM UART1"
- depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
- select DEBUG_MSM_UART
+ config DEBUG_MSM_UART
+ bool "Kernel low-level debugging messages via MSM UART"
+ depends on ARCH_MSM
help
Say Y here if you want the debug print routines to direct
- their output to the first serial port on MSM devices.
+ their output to the serial port on MSM devices.
- config DEBUG_MSM_UART2
- bool "Kernel low-level debugging messages via MSM UART2"
- depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
- select DEBUG_MSM_UART
- help
- Say Y here if you want the debug print routines to direct
- their output to the second serial port on MSM devices.
+ ARCH DEBUG_UART_PHYS DEBUG_UART_BASE #
+ MSM7X00A, QSD8X50 0xa9a00000 0xe1000000 UART1
+ MSM7X00A, QSD8X50 0xa9b00000 0xe1000000 UART2
+ MSM7X00A, QSD8X50 0xa9c00000 0xe1000000 UART3
- config DEBUG_MSM_UART3
- bool "Kernel low-level debugging messages via MSM UART3"
- depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
- select DEBUG_MSM_UART
- help
- Say Y here if you want the debug print routines to direct
- their output to the third serial port on MSM devices.
+ MSM7X30 0xaca00000 0xe1000000 UART1
+ MSM7X30 0xacb00000 0xe1000000 UART2
+ MSM7X30 0xacc00000 0xe1000000 UART3
- config DEBUG_MSM8660_UART
- bool "Kernel low-level debugging messages via MSM 8660 UART"
- depends on ARCH_MSM8X60
- select MSM_HAS_DEBUG_UART_HS
- select DEBUG_MSM_UART
- help
- Say Y here if you want the debug print routines to direct
- their output to the serial port on MSM 8660 devices.
+ Please adjust DEBUG_UART_PHYS and DEBUG_UART_BASE configuration
+ options based on your needs.
- config DEBUG_MSM8960_UART
- bool "Kernel low-level debugging messages via MSM 8960 UART"
- depends on ARCH_MSM8960
- select MSM_HAS_DEBUG_UART_HS
- select DEBUG_MSM_UART
+ config DEBUG_QCOM_UARTDM
+ bool "Kernel low-level debugging messages via QCOM UARTDM"
+ depends on ARCH_QCOM
help
Say Y here if you want the debug print routines to direct
- their output to the serial port on MSM 8960 devices.
+ their output to the serial port on Qualcomm devices.
- config DEBUG_MSM8974_UART
- bool "Kernel low-level debugging messages via MSM 8974 UART"
- depends on ARCH_MSM8974
- select MSM_HAS_DEBUG_UART_HS
- select DEBUG_MSM_UART
- help
- Say Y here if you want the debug print routines to direct
- their output to the serial port on MSM 8974 devices.
+ ARCH DEBUG_UART_PHYS DEBUG_UART_BASE
+ APQ8084 0xf995e000 0xfa75e000
+ MSM8X60 0x19c40000 0xf0040000
+ MSM8960 0x16440000 0xf0040000
+ MSM8974 0xf991e000 0xfa71e000
+
+ Please adjust DEBUG_UART_PHYS and DEBUG_UART_BASE configuration
+ options based on your needs.
config DEBUG_MVEBU_UART
bool "Kernel low-level debugging messages via MVEBU UART (old bootloaders)"
@@ -972,13 +963,23 @@ config DEBUG_IMX_UART_PORT
DEBUG_IMX51_UART || \
DEBUG_IMX53_UART || \
DEBUG_IMX6Q_UART || \
- DEBUG_IMX6SL_UART
+ DEBUG_IMX6SL_UART || \
+ DEBUG_IMX6SX_UART
default 1
depends on ARCH_MXC
help
Choose UART port on which kernel low-level debug messages
should be output.
+config DEBUG_VF_UART_PORT
+ int "Vybrid Debug UART Port Selection" if DEBUG_VF_UART
+ default 1
+ range 0 3
+ depends on SOC_VF610
+ help
+ Choose UART port on which kernel low-level debug messages
+ should be output.
+
config DEBUG_TEGRA_UART
bool
depends on ARCH_TEGRA
@@ -987,10 +988,6 @@ config DEBUG_STI_UART
bool
depends on ARCH_STI
-config DEBUG_MSM_UART
- bool
- depends on ARCH_MSM || ARCH_QCOM
-
config DEBUG_LL_INCLUDE
string
default "debug/8250.S" if DEBUG_LL_UART_8250 || DEBUG_UART_8250
@@ -1007,8 +1004,9 @@ config DEBUG_LL_INCLUDE
DEBUG_IMX51_UART || \
DEBUG_IMX53_UART ||\
DEBUG_IMX6Q_UART || \
- DEBUG_IMX6SL_UART
- default "debug/msm.S" if DEBUG_MSM_UART
+ DEBUG_IMX6SL_UART || \
+ DEBUG_IMX6SX_UART
+ default "debug/msm.S" if DEBUG_MSM_UART || DEBUG_QCOM_UARTDM
default "debug/omap2plus.S" if DEBUG_OMAP2PLUS_UART
default "debug/s3c24xx.S" if DEBUG_S3C24XX_UART
default "debug/sirf.S" if DEBUG_SIRFPRIMA2_UART1 || DEBUG_SIRFMARCO_UART1
@@ -1079,6 +1077,7 @@ config DEBUG_UART_PHYS
default 0x80230000 if DEBUG_PICOXCELL_UART
default 0x808c0000 if ARCH_EP93XX
default 0x90020000 if DEBUG_NSPIRE_CLASSIC_UART || DEBUG_NSPIRE_CX_UART
+ default 0xa9a00000 if DEBUG_MSM_UART
default 0xb0090000 if DEBUG_VEXPRESS_UART0_CRX
default 0xc0013000 if DEBUG_U300_UART
default 0xc8000000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN
@@ -1094,6 +1093,7 @@ config DEBUG_UART_PHYS
ARCH_ORION5X
default 0xf7fc9000 if DEBUG_BERLIN_UART
default 0xf8b00000 if DEBUG_HI3716_UART
+ default 0xf991e000 if DEBUG_QCOM_UARTDM
default 0xfcb00000 if DEBUG_HI3620_UART
default 0xfe800000 if ARCH_IOP32X
default 0xffc02000 if DEBUG_SOCFPGA_UART
@@ -1102,11 +1102,13 @@ config DEBUG_UART_PHYS
default 0xfffff700 if ARCH_IOP33X
depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
DEBUG_LL_UART_EFM32 || \
- DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_S3C24XX_UART
+ DEBUG_UART_8250 || DEBUG_UART_PL01X || \
+ DEBUG_MSM_UART || DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART
config DEBUG_UART_VIRT
hex "Virtual base address of debug UART"
default 0xe0010fe0 if ARCH_RPC
+ default 0xe1000000 if DEBUG_MSM_UART
default 0xf0000be0 if ARCH_EBSA110
default 0xf0009000 if DEBUG_CNS3XXX
default 0xf01fb000 if DEBUG_NOMADIK_UART
@@ -1128,6 +1130,7 @@ config DEBUG_UART_VIRT
default 0xf7fc9000 if DEBUG_BERLIN_UART
default 0xf8009000 if DEBUG_VEXPRESS_UART0_CA9
default 0xf8090000 if DEBUG_VEXPRESS_UART0_RS1
+ default 0xfa71e000 if DEBUG_QCOM_UARTDM
default 0xfb009000 if DEBUG_REALVIEW_STD_PORT
default 0xfb10c000 if DEBUG_REALVIEW_PB1176_PORT
default 0xfd000000 if ARCH_SPEAR3XX || ARCH_SPEAR6XX
@@ -1166,7 +1169,8 @@ config DEBUG_UART_VIRT
default 0xff003000 if DEBUG_U300_UART
default DEBUG_UART_PHYS if !MMU
depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
- DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_S3C24XX_UART
+ DEBUG_UART_8250 || DEBUG_UART_PL01X || \
+ DEBUG_MSM_UART || DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART
config DEBUG_UART_8250_SHIFT
int "Register offset shift for the 8250 debug UART"
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 41c1931f0155..6721fab13734 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -138,10 +138,12 @@ endif
textofs-$(CONFIG_ARCH_MSM7X30) := 0x00208000
textofs-$(CONFIG_ARCH_MSM8X60) := 0x00208000
textofs-$(CONFIG_ARCH_MSM8960) := 0x00208000
+textofs-$(CONFIG_ARCH_AXXIA) := 0x00308000
# Machine directory name. This list is sorted alphanumerically
# by CONFIG_* macro name.
machine-$(CONFIG_ARCH_AT91) += at91
+machine-$(CONFIG_ARCH_AXXIA) += axxia
machine-$(CONFIG_ARCH_BCM) += bcm
machine-$(CONFIG_ARCH_BERLIN) += berlin
machine-$(CONFIG_ARCH_CLPS711X) += clps711x
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 377b7c364033..ff7a04b68d88 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -50,6 +50,7 @@ dtb-$(CONFIG_ARCH_AT91) += sama5d35ek.dtb
dtb-$(CONFIG_ARCH_AT91) += sama5d36ek.dtb
dtb-$(CONFIG_ARCH_ATLAS6) += atlas6-evb.dtb
+dtb-$(CONFIG_ARCH_AXXIA) += axm5516-amarillo.dtb
dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb
dtb-$(CONFIG_ARCH_BCM_5301X) += bcm4708-netgear-r6250.dtb
dtb-$(CONFIG_ARCH_BCM_MOBILE) += bcm28155-ap.dtb \
@@ -73,6 +74,7 @@ dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \
exynos5250-smdk5250.dtb \
exynos5250-snow.dtb \
exynos5420-arndale-octa.dtb \
+ exynos5420-peach-pit.dtb \
exynos5420-smdk5420.dtb \
exynos5440-sd5v1.dtb \
exynos5440-ssdk5440.dtb
@@ -289,7 +291,10 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
am43x-epos-evm.dtb \
am437x-gp-evm.dtb \
dra7-evm.dtb
-dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-ethernet-disk-mini-v2.dtb
+dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-d2-network.dtb \
+ orion5x-lacie-ethernet-disk-mini-v2.dtb \
+ orion5x-maxtor-shared-storage-2.dtb \
+ orion5x-rd88f5182-nas.dtb
dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb
dtb-$(CONFIG_ARCH_QCOM) += qcom-msm8660-surf.dtb \
qcom-msm8960-cdp.dtb \
@@ -297,8 +302,7 @@ dtb-$(CONFIG_ARCH_QCOM) += qcom-msm8660-surf.dtb \
dtb-$(CONFIG_ARCH_S3C24XX) += s3c2416-smdk2416.dtb
dtb-$(CONFIG_ARCH_S3C64XX) += s3c6410-mini6410.dtb \
s3c6410-smdk6410.dtb
-dtb-$(CONFIG_ARCH_SHMOBILE_LEGACY) += emev2-kzm9d.dtb \
- r7s72100-genmai.dtb \
+dtb-$(CONFIG_ARCH_SHMOBILE_LEGACY) += r7s72100-genmai.dtb \
r7s72100-genmai-reference.dtb \
r8a7740-armadillo800eva.dtb \
r8a7778-bockw.dtb \
diff --git a/arch/arm/boot/dts/at91-cosino_mega2560.dts b/arch/arm/boot/dts/at91-cosino_mega2560.dts
index a542d5837a17..27ebb0f722fd 100644
--- a/arch/arm/boot/dts/at91-cosino_mega2560.dts
+++ b/arch/arm/boot/dts/at91-cosino_mega2560.dts
@@ -32,11 +32,6 @@
status = "okay";
};
-
- tsadcc: tsadcc@f804c000 {
- status = "okay";
- };
-
rtc@fffffeb0 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
index 4537259ce529..099111bd4221 100644
--- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
@@ -21,6 +21,14 @@
reg = <0x20000000 0x10000000>;
};
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
+
+ main_xtal {
+ clock-frequency = <12000000>;
+ };
+
ahb {
apb {
mmc0: mmc@f0000000 {
diff --git a/arch/arm/boot/dts/at91sam9261.dtsi b/arch/arm/boot/dts/at91sam9261.dtsi
index 3be973e9889a..80cdcecf0332 100644
--- a/arch/arm/boot/dts/at91sam9261.dtsi
+++ b/arch/arm/boot/dts/at91sam9261.dtsi
@@ -45,6 +45,18 @@
reg = <0x20000000 0x08000000>;
};
+ main_xtal: main_xtal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ slow_xtal: slow_xtal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
ahb {
compatible = "simple-bus";
#address-cells = <1>;
@@ -524,17 +536,24 @@
#size-cells = <0>;
#interrupt-cells = <1>;
- clk32k: slck {
+ slow_rc_osc: slow_rc_osc {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
+ clock-accuracy = <50000000>;
+ };
+
+ clk32k: slck {
+ compatible = "atmel,at91sam9260-clk-slow";
+ #clock-cells = <0>;
+ clocks = <&slow_rc_osc &slow_xtal>;
};
main: mainck {
compatible = "atmel,at91rm9200-clk-main";
#clock-cells = <0>;
interrupts-extended = <&pmc AT91_PMC_MOSCS>;
- clocks = <&clk32k>;
+ clocks = <&main_xtal>;
};
plla: pllack {
diff --git a/arch/arm/boot/dts/at91sam9261ek.dts b/arch/arm/boot/dts/at91sam9261ek.dts
index 2ce527e70c7a..c6683ea8b743 100644
--- a/arch/arm/boot/dts/at91sam9261ek.dts
+++ b/arch/arm/boot/dts/at91sam9261ek.dts
@@ -20,6 +20,10 @@
reg = <0x20000000 0x4000000>;
};
+ main_xtal {
+ clock-frequency = <18432000>;
+ };
+
clocks {
#address-cells = <1>;
#size-cells = <1>;
diff --git a/arch/arm/boot/dts/at91sam9rl.dtsi b/arch/arm/boot/dts/at91sam9rl.dtsi
index 92a52faebef7..ae9c39a28c63 100644
--- a/arch/arm/boot/dts/at91sam9rl.dtsi
+++ b/arch/arm/boot/dts/at91sam9rl.dtsi
@@ -48,6 +48,18 @@
reg = <0x20000000 0x04000000>;
};
+ slow_xtal: slow_xtal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ main_xtal: main_xtal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
ahb {
compatible = "simple-bus";
#address-cells = <1>;
@@ -548,17 +560,11 @@
#size-cells = <0>;
#interrupt-cells = <1>;
- clk32k: slck {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <32768>;
- };
-
main: mainck {
compatible = "atmel,at91rm9200-clk-main";
#clock-cells = <0>;
interrupts-extended = <&pmc AT91_PMC_MOSCS>;
- clocks = <&clk32k>;
+ clocks = <&main_xtal>;
};
plla: pllack {
@@ -769,6 +775,32 @@
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
status = "disabled";
};
+
+ sckc@fffffd50 {
+ compatible = "atmel,at91sam9x5-sckc";
+ reg = <0xfffffd50 0x4>;
+
+ slow_osc: slow_osc {
+ compatible = "atmel,at91sam9x5-clk-slow-osc";
+ #clock-cells = <0>;
+ atmel,startup-time-usec = <1200000>;
+ clocks = <&slow_xtal>;
+ };
+
+ slow_rc_osc: slow_rc_osc {
+ compatible = "atmel,at91sam9x5-clk-slow-rc-osc";
+ #clock-cells = <0>;
+ atmel,startup-time-usec = <75>;
+ clock-frequency = <32768>;
+ clock-accuracy = <50000000>;
+ };
+
+ clk32k: slck {
+ compatible = "atmel,at91sam9x5-clk-slow";
+ #clock-cells = <0>;
+ clocks = <&slow_rc_osc &slow_osc>;
+ };
+ };
};
};
diff --git a/arch/arm/boot/dts/at91sam9rlek.dts b/arch/arm/boot/dts/at91sam9rlek.dts
index cddb37825fad..b3b89baf972e 100644
--- a/arch/arm/boot/dts/at91sam9rlek.dts
+++ b/arch/arm/boot/dts/at91sam9rlek.dts
@@ -20,6 +20,15 @@
reg = <0x20000000 0x4000000>;
};
+
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
+
+ main_xtal {
+ clock-frequency = <12000000>;
+ };
+
clocks {
#address-cells = <1>;
#size-cells = <1>;
diff --git a/arch/arm/boot/dts/axm5516-amarillo.dts b/arch/arm/boot/dts/axm5516-amarillo.dts
new file mode 100644
index 000000000000..a9d60471d9ff
--- /dev/null
+++ b/arch/arm/boot/dts/axm5516-amarillo.dts
@@ -0,0 +1,51 @@
+/*
+ * arch/arm/boot/dts/axm5516-amarillo.dts
+ *
+ * Copyright (C) 2013 LSI
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+/dts-v1/;
+
+/memreserve/ 0x00000000 0x00400000;
+
+#include "axm55xx.dtsi"
+#include "axm5516-cpus.dtsi"
+
+/ {
+ model = "Amarillo AXM5516";
+ compatible = "lsi,axm5516-amarillo", "lsi,axm5516";
+
+ memory {
+ device_type = "memory";
+ reg = <0 0x00000000 0x02 0x00000000>;
+ };
+};
+
+&serial0 {
+ status = "okay";
+};
+
+&serial1 {
+ status = "okay";
+};
+
+&serial2 {
+ status = "okay";
+};
+
+&serial3 {
+ status = "okay";
+};
+
+&gpio0 {
+ status = "okay";
+};
+
+&gpio1 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/axm5516-cpus.dtsi b/arch/arm/boot/dts/axm5516-cpus.dtsi
new file mode 100644
index 000000000000..b85f360cb125
--- /dev/null
+++ b/arch/arm/boot/dts/axm5516-cpus.dtsi
@@ -0,0 +1,204 @@
+/*
+ * arch/arm/boot/dts/axm5516-cpus.dtsi
+ *
+ * Copyright (C) 2013 LSI
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+/ {
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&CPU0>;
+ };
+ core1 {
+ cpu = <&CPU1>;
+ };
+ core2 {
+ cpu = <&CPU2>;
+ };
+ core3 {
+ cpu = <&CPU3>;
+ };
+ };
+ cluster1 {
+ core0 {
+ cpu = <&CPU4>;
+ };
+ core1 {
+ cpu = <&CPU5>;
+ };
+ core2 {
+ cpu = <&CPU6>;
+ };
+ core3 {
+ cpu = <&CPU7>;
+ };
+ };
+ cluster2 {
+ core0 {
+ cpu = <&CPU8>;
+ };
+ core1 {
+ cpu = <&CPU9>;
+ };
+ core2 {
+ cpu = <&CPU10>;
+ };
+ core3 {
+ cpu = <&CPU11>;
+ };
+ };
+ cluster3 {
+ core0 {
+ cpu = <&CPU12>;
+ };
+ core1 {
+ cpu = <&CPU13>;
+ };
+ core2 {
+ cpu = <&CPU14>;
+ };
+ core3 {
+ cpu = <&CPU15>;
+ };
+ };
+ };
+
+ CPU0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0x00>;
+ clock-frequency= <1400000000>;
+ cpu-release-addr = <0>; // Fixed by the boot loader
+ };
+
+ CPU1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0x01>;
+ clock-frequency= <1400000000>;
+ cpu-release-addr = <0>; // Fixed by the boot loader
+ };
+
+ CPU2: cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0x02>;
+ clock-frequency= <1400000000>;
+ cpu-release-addr = <0>; // Fixed by the boot loader
+ };
+
+ CPU3: cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0x03>;
+ clock-frequency= <1400000000>;
+ cpu-release-addr = <0>; // Fixed by the boot loader
+ };
+
+ CPU4: cpu@100 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0x100>;
+ clock-frequency= <1400000000>;
+ cpu-release-addr = <0>; // Fixed by the boot loader
+ };
+
+ CPU5: cpu@101 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0x101>;
+ clock-frequency= <1400000000>;
+ cpu-release-addr = <0>; // Fixed by the boot loader
+ };
+
+ CPU6: cpu@102 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0x102>;
+ clock-frequency= <1400000000>;
+ cpu-release-addr = <0>; // Fixed by the boot loader
+ };
+
+ CPU7: cpu@103 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0x103>;
+ clock-frequency= <1400000000>;
+ cpu-release-addr = <0>; // Fixed by the boot loader
+ };
+
+ CPU8: cpu@200 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0x200>;
+ clock-frequency= <1400000000>;
+ cpu-release-addr = <0>; // Fixed by the boot loader
+ };
+
+ CPU9: cpu@201 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0x201>;
+ clock-frequency= <1400000000>;
+ cpu-release-addr = <0>; // Fixed by the boot loader
+ };
+
+ CPU10: cpu@202 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0x202>;
+ clock-frequency= <1400000000>;
+ cpu-release-addr = <0>; // Fixed by the boot loader
+ };
+
+ CPU11: cpu@203 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0x203>;
+ clock-frequency= <1400000000>;
+ cpu-release-addr = <0>; // Fixed by the boot loader
+ };
+
+ CPU12: cpu@300 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0x300>;
+ clock-frequency= <1400000000>;
+ cpu-release-addr = <0>; // Fixed by the boot loader
+ };
+
+ CPU13: cpu@301 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0x301>;
+ clock-frequency= <1400000000>;
+ cpu-release-addr = <0>; // Fixed by the boot loader
+ };
+
+ CPU14: cpu@302 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0x302>;
+ clock-frequency= <1400000000>;
+ cpu-release-addr = <0>; // Fixed by the boot loader
+ };
+
+ CPU15: cpu@303 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0x303>;
+ clock-frequency= <1400000000>;
+ cpu-release-addr = <0>; // Fixed by the boot loader
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/axm55xx.dtsi b/arch/arm/boot/dts/axm55xx.dtsi
new file mode 100644
index 000000000000..ea288f0a1d39
--- /dev/null
+++ b/arch/arm/boot/dts/axm55xx.dtsi
@@ -0,0 +1,204 @@
+/*
+ * arch/arm/boot/dts/axm55xx.dtsi
+ *
+ * Copyright (C) 2013 LSI
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/lsi,axm5516-clks.h>
+
+#include "skeleton64.dtsi"
+
+/ {
+ interrupt-parent = <&gic>;
+
+ aliases {
+ serial0 = &serial0;
+ serial1 = &serial1;
+ serial2 = &serial2;
+ serial3 = &serial3;
+ timer = &timer0;
+ };
+
+ clocks {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ clk_ref0: clk_ref0 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <125000000>;
+ };
+
+ clk_ref1: clk_ref1 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <125000000>;
+ };
+
+ clk_ref2: clk_ref2 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <125000000>;
+ };
+
+ clks: clock-controller@2010020000 {
+ compatible = "lsi,axm5516-clks";
+ #clock-cells = <1>;
+ reg = <0x20 0x10020000 0 0x20000>;
+ };
+ };
+
+ gic: interrupt-controller@2001001000 {
+ compatible = "arm,cortex-a15-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0x20 0x01001000 0 0x1000>,
+ <0x20 0x01002000 0 0x1000>,
+ <0x20 0x01004000 0 0x2000>,
+ <0x20 0x01006000 0 0x2000>;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) |
+ IRQ_TYPE_LEVEL_HIGH)>;
+ };
+
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupts =
+ <GIC_PPI 13
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+
+ pmu {
+ compatible = "arm,cortex-a15-pmu";
+ interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ device_type = "soc";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&gic>;
+ ranges;
+
+ syscon: syscon@2010030000 {
+ compatible = "lsi,axxia-syscon", "syscon";
+ reg = <0x20 0x10030000 0 0x2000>;
+ };
+
+ reset: reset@2010031000 {
+ compatible = "lsi,axm55xx-reset";
+ syscon = <&syscon>;
+ };
+
+ amba {
+ compatible = "arm,amba-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ serial0: uart@2010080000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x20 0x10080000 0 0x1000>;
+ interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks AXXIA_CLK_PER>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+
+ serial1: uart@2010081000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x20 0x10081000 0 0x1000>;
+ interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks AXXIA_CLK_PER>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+
+ serial2: uart@2010082000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x20 0x10082000 0 0x1000>;
+ interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks AXXIA_CLK_PER>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+
+ serial3: uart@2010083000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x20 0x10083000 0 0x1000>;
+ interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks AXXIA_CLK_PER>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+
+ timer0: timer@2010091000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0x20 0x10091000 0 0x1000>;
+ interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks AXXIA_CLK_PER>;
+ clock-names = "apb_pclk";
+ status = "okay";
+ };
+
+ gpio0: gpio@2010092000 {
+ #gpio-cells = <2>;
+ compatible = "arm,pl061", "arm,primecell";
+ gpio-controller;
+ reg = <0x20 0x10092000 0x00 0x1000>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks AXXIA_CLK_PER>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+
+ gpio1: gpio@2010093000 {
+ #gpio-cells = <2>;
+ compatible = "arm,pl061", "arm,primecell";
+ gpio-controller;
+ reg = <0x20 0x10093000 0x00 0x1000>;
+ interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks AXXIA_CLK_PER>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+ };
+ };
+};
+
+/*
+ Local Variables:
+ mode: C
+ End:
+*/
diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index 2f8bcd068d17..58ff8e28c74f 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -129,12 +129,10 @@
status = "disabled";
#address-cells = <1>;
#size-cells = <1>;
+ #clock-cells = <1>;
+ clock-output-names = "cam_a_clkout", "cam_b_clkout";
ranges;
- clock_cam: clock-controller {
- #clock-cells = <1>;
- };
-
fimc_0: fimc@11800000 {
compatible = "samsung,exynos4210-fimc";
reg = <0x11800000 0x1000>;
@@ -371,6 +369,8 @@
interrupts = <0 60 0>;
clocks = <&clock CLK_I2C2>;
clock-names = "i2c";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_bus>;
status = "disabled";
};
@@ -382,6 +382,8 @@
interrupts = <0 61 0>;
clocks = <&clock CLK_I2C3>;
clock-names = "i2c";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3_bus>;
status = "disabled";
};
@@ -393,6 +395,8 @@
interrupts = <0 62 0>;
clocks = <&clock CLK_I2C4>;
clock-names = "i2c";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c4_bus>;
status = "disabled";
};
@@ -404,6 +408,8 @@
interrupts = <0 63 0>;
clocks = <&clock CLK_I2C5>;
clock-names = "i2c";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c5_bus>;
status = "disabled";
};
@@ -415,6 +421,8 @@
interrupts = <0 64 0>;
clocks = <&clock CLK_I2C6>;
clock-names = "i2c";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c6_bus>;
status = "disabled";
};
@@ -426,6 +434,8 @@
interrupts = <0 65 0>;
clocks = <&clock CLK_I2C7>;
clock-names = "i2c";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c7_bus>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts
index 63e34b24b04f..9296dee10e26 100644
--- a/arch/arm/boot/dts/exynos4210-universal_c210.dts
+++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts
@@ -28,6 +28,21 @@
bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rw rootwait earlyprintk panic=5 maxcpus=1";
};
+ sysram@02020000 {
+ smp-sysram@0 {
+ status = "disabled";
+ };
+
+ smp-sysram@5000 {
+ compatible = "samsung,exynos4210-sysram";
+ reg = <0x5000 0x1000>;
+ };
+
+ smp-sysram@1f000 {
+ status = "disabled";
+ };
+ };
+
mct@10050000 {
compatible = "none";
};
diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi
index cacf6140dd2f..ee3001f38821 100644
--- a/arch/arm/boot/dts/exynos4210.dtsi
+++ b/arch/arm/boot/dts/exynos4210.dtsi
@@ -31,6 +31,24 @@
pinctrl2 = &pinctrl_2;
};
+ sysram@02020000 {
+ compatible = "mmio-sram";
+ reg = <0x02020000 0x20000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x02020000 0x20000>;
+
+ smp-sysram@0 {
+ compatible = "samsung,exynos4210-sysram";
+ reg = <0x0 0x1000>;
+ };
+
+ smp-sysram@1f000 {
+ compatible = "samsung,exynos4210-sysram-ns";
+ reg = <0x1f000 0x1000>;
+ };
+ };
+
pd_lcd1: lcd1-power-domain@10023CA0 {
compatible = "samsung,exynos4210-pd";
reg = <0x10023CA0 0x20>;
diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts
index 8a558b7ac999..bc08e6ef3d4f 100644
--- a/arch/arm/boot/dts/exynos4412-trats2.dts
+++ b/arch/arm/boot/dts/exynos4412-trats2.dts
@@ -20,7 +20,7 @@
compatible = "samsung,trats2", "samsung,exynos4412", "samsung,exynos4";
aliases {
- i2c8 = &i2c_ak8975;
+ i2c9 = &i2c_ak8975;
};
memory {
@@ -80,7 +80,24 @@
enable-active-high;
};
- /* More to come */
+ cam_af_reg: voltage-regulator-3 {
+ compatible = "regulator-fixed";
+ regulator-name = "CAM_AF";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ gpio = <&gpm0 4 0>;
+ enable-active-high;
+ };
+
+ cam_isp_core_reg: voltage-regulator-4 {
+ compatible = "regulator-fixed";
+ regulator-name = "CAM_ISP_CORE_1.2V_EN";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ gpio = <&gpm0 3 0>;
+ enable-active-high;
+ regulator-always-on;
+ };
};
gpio-keys {
@@ -140,6 +157,38 @@
};
};
+ i2c_0: i2c@13860000 {
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-slave-addr = <0x10>;
+ samsung,i2c-max-bus-freq = <400000>;
+ pinctrl-0 = <&i2c0_bus>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ s5c73m3@3c {
+ compatible = "samsung,s5c73m3";
+ reg = <0x3c>;
+ standby-gpios = <&gpm0 1 1>; /* ISP_STANDBY */
+ xshutdown-gpios = <&gpf1 3 1>; /* ISP_RESET */
+ vdd-int-supply = <&buck9_reg>;
+ vddio-cis-supply = <&ldo9_reg>;
+ vdda-supply = <&ldo17_reg>;
+ vddio-host-supply = <&ldo18_reg>;
+ vdd-af-supply = <&cam_af_reg>;
+ vdd-reg-supply = <&cam_io_reg>;
+ clock-frequency = <24000000>;
+ /* CAM_A_CLKOUT */
+ clocks = <&camera 0>;
+ clock-names = "cis_extclk";
+ port {
+ s5c73m3_ep: endpoint {
+ remote-endpoint = <&csis0_ep>;
+ data-lanes = <1 2 3 4>;
+ };
+ };
+ };
+ };
+
i2c@138D0000 {
samsung,i2c-sda-delay = <100>;
samsung,i2c-slave-addr = <0x10>;
@@ -586,8 +635,8 @@
status = "okay";
};
- camera {
- pinctrl-0 = <&cam_port_b_clk_active>;
+ camera: camera {
+ pinctrl-0 = <&cam_port_a_clk_active &cam_port_b_clk_active>;
pinctrl-names = "default";
status = "okay";
@@ -607,6 +656,23 @@
status = "okay";
};
+ csis_0: csis@11880000 {
+ status = "okay";
+ vddcore-supply = <&ldo8_reg>;
+ vddio-supply = <&ldo10_reg>;
+ clock-frequency = <176000000>;
+
+ /* Camera C (3) MIPI CSI-2 (CSIS0) */
+ port@3 {
+ reg = <3>;
+ csis0_ep: endpoint {
+ remote-endpoint = <&s5c73m3_ep>;
+ data-lanes = <1 2 3 4>;
+ samsung,csis-hs-settle = <12>;
+ };
+ };
+ };
+
csis_1: csis@11890000 {
vddcore-supply = <&ldo8_reg>;
vddio-supply = <&ldo10_reg>;
@@ -647,10 +713,11 @@
reg = <0x10>;
svdda-supply = <&cam_io_reg>;
svddio-supply = <&ldo19_reg>;
+ afvdd-supply = <&ldo19_reg>;
clock-frequency = <24000000>;
/* CAM_B_CLKOUT */
- clocks = <&clock_cam 1>;
- clock-names = "mclk";
+ clocks = <&camera 1>;
+ clock-names = "extclk";
samsung,camclk-out = <1>;
gpios = <&gpm1 6 0>;
diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi
index c4a9306f8529..70e3765b51ee 100644
--- a/arch/arm/boot/dts/exynos4x12.dtsi
+++ b/arch/arm/boot/dts/exynos4x12.dtsi
@@ -37,6 +37,24 @@
interrupts = <2 2>, <3 2>, <18 2>, <19 2>;
};
+ sysram@02020000 {
+ compatible = "mmio-sram";
+ reg = <0x02020000 0x40000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x02020000 0x40000>;
+
+ smp-sysram@0 {
+ compatible = "samsung,exynos4210-sysram";
+ reg = <0x0 0x1000>;
+ };
+
+ smp-sysram@2f000 {
+ compatible = "samsung,exynos4210-sysram-ns";
+ reg = <0x2f000 0x1000>;
+ };
+ };
+
pd_isp: isp-power-domain@10023CA0 {
compatible = "samsung,exynos4210-pd";
reg = <0x10023CA0 0x20>;
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index 37423314a028..e44693e2cfda 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -72,6 +72,24 @@
};
};
+ sysram@02020000 {
+ compatible = "mmio-sram";
+ reg = <0x02020000 0x30000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x02020000 0x30000>;
+
+ smp-sysram@0 {
+ compatible = "samsung,exynos4210-sysram";
+ reg = <0x0 0x1000>;
+ };
+
+ smp-sysram@2f000 {
+ compatible = "samsung,exynos4210-sysram-ns";
+ reg = <0x2f000 0x1000>;
+ };
+ };
+
pd_gsc: gsc-power-domain@10044000 {
compatible = "samsung,exynos4210-pd";
reg = <0x10044000 0x20>;
diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts
new file mode 100644
index 000000000000..fae33dddac39
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts
@@ -0,0 +1,147 @@
+/*
+ * Google Peach Pit Rev 6+ board device tree source
+ *
+ * Copyright (c) 2014 Google, Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "exynos5420.dtsi"
+
+/ {
+ model = "Google Peach Pit Rev 6+";
+
+ compatible = "google,pit-rev16",
+ "google,pit-rev15", "google,pit-rev14",
+ "google,pit-rev13", "google,pit-rev12",
+ "google,pit-rev11", "google,pit-rev10",
+ "google,pit-rev9", "google,pit-rev8",
+ "google,pit-rev7", "google,pit-rev6",
+ "google,pit", "google,peach","samsung,exynos5420",
+ "samsung,exynos5";
+
+ memory {
+ reg = <0x20000000 0x80000000>;
+ };
+
+ fixed-rate-clocks {
+ oscclk {
+ compatible = "samsung,exynos5420-oscclk";
+ clock-frequency = <24000000>;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&power_key_irq>;
+
+ power {
+ label = "Power";
+ gpios = <&gpx1 2 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER>;
+ gpio-key,wakeup;
+ };
+ };
+
+ backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm 0 1000000 0>;
+ brightness-levels = <0 100 500 1000 1500 2000 2500 2800>;
+ default-brightness-level = <7>;
+ pinctrl-0 = <&pwm0_out>;
+ pinctrl-names = "default";
+ };
+};
+
+&pinctrl_0 {
+ tpm_irq: tpm-irq {
+ samsung,pins = "gpx1-0";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ power_key_irq: power-key-irq {
+ samsung,pins = "gpx1-2";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+};
+
+&rtc {
+ status = "okay";
+};
+
+&uart_3 {
+ status = "okay";
+};
+
+&mmc_0 {
+ status = "okay";
+ num-slots = <1>;
+ broken-cd;
+ caps2-mmc-hs200-1_8v;
+ supports-highspeed;
+ non-removable;
+ card-detect-delay = <200>;
+ clock-frequency = <400000000>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <0 4>;
+ samsung,dw-mshc-ddr-timing = <0 2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
+
+ slot@0 {
+ reg = <0>;
+ bus-width = <8>;
+ };
+};
+
+&mmc_2 {
+ status = "okay";
+ num-slots = <1>;
+ supports-highspeed;
+ card-detect-delay = <200>;
+ clock-frequency = <400000000>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <2 3>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
+
+ slot@0 {
+ reg = <0>;
+ bus-width = <4>;
+ };
+};
+
+&hsi2c_9 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ tpm@20 {
+ compatible = "infineon,slb9645tt";
+ reg = <0x20>;
+
+ /* Unused irq; but still need to configure the pins */
+ pinctrl-names = "default";
+ pinctrl-0 = <&tpm_irq>;
+ };
+};
+
+/*
+ * Use longest HW watchdog in SoC (32 seconds) since the hardware
+ * watchdog provides no debugging information (compared to soft/hard
+ * lockup detectors) and so should be last resort.
+ */
+&watchdog {
+ timeout-sec = <32>;
+};
diff --git a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
index e62c8eb57438..ba686e40eac7 100644
--- a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
@@ -624,6 +624,34 @@
samsung,pin-drv = <0>;
};
+ pwm0_out: pwm0-out {
+ samsung,pins = "gpb2-0";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ pwm1_out: pwm1-out {
+ samsung,pins = "gpb2-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ pwm2_out: pwm2-out {
+ samsung,pins = "gpb2-2";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ pwm3_out: pwm3-out {
+ samsung,pins = "gpb2-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
i2c7_hs_bus: i2c7-hs-bus {
samsung,pins = "gpb2-2", "gpb2-3";
samsung,pin-function = <3>;
diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index b69fbcb7dcb8..5e36449a831c 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -58,6 +58,7 @@
compatible = "arm,cortex-a15";
reg = <0x0>;
clock-frequency = <1800000000>;
+ cci-control-port = <&cci_control1>;
};
cpu1: cpu@1 {
@@ -65,6 +66,7 @@
compatible = "arm,cortex-a15";
reg = <0x1>;
clock-frequency = <1800000000>;
+ cci-control-port = <&cci_control1>;
};
cpu2: cpu@2 {
@@ -72,6 +74,7 @@
compatible = "arm,cortex-a15";
reg = <0x2>;
clock-frequency = <1800000000>;
+ cci-control-port = <&cci_control1>;
};
cpu3: cpu@3 {
@@ -79,6 +82,7 @@
compatible = "arm,cortex-a15";
reg = <0x3>;
clock-frequency = <1800000000>;
+ cci-control-port = <&cci_control1>;
};
cpu4: cpu@100 {
@@ -86,6 +90,7 @@
compatible = "arm,cortex-a7";
reg = <0x100>;
clock-frequency = <1000000000>;
+ cci-control-port = <&cci_control0>;
};
cpu5: cpu@101 {
@@ -93,6 +98,7 @@
compatible = "arm,cortex-a7";
reg = <0x101>;
clock-frequency = <1000000000>;
+ cci-control-port = <&cci_control0>;
};
cpu6: cpu@102 {
@@ -100,6 +106,7 @@
compatible = "arm,cortex-a7";
reg = <0x102>;
clock-frequency = <1000000000>;
+ cci-control-port = <&cci_control0>;
};
cpu7: cpu@103 {
@@ -107,6 +114,44 @@
compatible = "arm,cortex-a7";
reg = <0x103>;
clock-frequency = <1000000000>;
+ cci-control-port = <&cci_control0>;
+ };
+ };
+
+ cci@10d20000 {
+ compatible = "arm,cci-400";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x10d20000 0x1000>;
+ ranges = <0x0 0x10d20000 0x6000>;
+
+ cci_control0: slave-if@4000 {
+ compatible = "arm,cci-400-ctrl-if";
+ interface-type = "ace";
+ reg = <0x4000 0x1000>;
+ };
+ cci_control1: slave-if@5000 {
+ compatible = "arm,cci-400-ctrl-if";
+ interface-type = "ace";
+ reg = <0x5000 0x1000>;
+ };
+ };
+
+ sysram@02020000 {
+ compatible = "mmio-sram";
+ reg = <0x02020000 0x54000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x02020000 0x54000>;
+
+ smp-sysram@0 {
+ compatible = "samsung,exynos4210-sysram";
+ reg = <0x0 0x1000>;
+ };
+
+ smp-sysram@53000 {
+ compatible = "samsung,exynos4210-sysram-ns";
+ reg = <0x53000 0x1000>;
};
};
@@ -125,7 +170,7 @@
clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in";
};
- codec@11000000 {
+ mfc: codec@11000000 {
compatible = "samsung,mfc-v7";
reg = <0x11000000 0x10000>;
interrupts = <0 96 0>;
@@ -169,7 +214,7 @@
status = "disabled";
};
- mct@101C0000 {
+ mct: mct@101C0000 {
compatible = "samsung,exynos4210-mct";
reg = <0x101C0000 0x800>;
interrupt-controller;
@@ -260,7 +305,7 @@
interrupts = <0 47 0>;
};
- rtc@101E0000 {
+ rtc: rtc@101E0000 {
clocks = <&clock CLK_RTC>;
clock-names = "rtc";
status = "disabled";
@@ -427,22 +472,22 @@
status = "disabled";
};
- serial@12C00000 {
+ uart_0: serial@12C00000 {
clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
clock-names = "uart", "clk_uart_baud0";
};
- serial@12C10000 {
+ uart_1: serial@12C10000 {
clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
clock-names = "uart", "clk_uart_baud0";
};
- serial@12C20000 {
+ uart_2: serial@12C20000 {
clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
clock-names = "uart", "clk_uart_baud0";
};
- serial@12C30000 {
+ uart_3: serial@12C30000 {
clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
clock-names = "uart", "clk_uart_baud0";
};
@@ -462,14 +507,14 @@
#phy-cells = <0>;
};
- dp-controller@145B0000 {
+ dp: dp-controller@145B0000 {
clocks = <&clock CLK_DP1>;
clock-names = "dp";
phys = <&dp_phy>;
phy-names = "dp";
};
- fimd@14400000 {
+ fimd: fimd@14400000 {
samsung,power-domain = <&disp_pd>;
clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>;
clock-names = "sclk_fimd", "fimd";
@@ -546,7 +591,7 @@
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&i2c4_hs_bus>;
- clocks = <&clock CLK_I2C4>;
+ clocks = <&clock CLK_USI0>;
clock-names = "hsi2c";
status = "disabled";
};
@@ -559,7 +604,7 @@
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&i2c5_hs_bus>;
- clocks = <&clock CLK_I2C5>;
+ clocks = <&clock CLK_USI1>;
clock-names = "hsi2c";
status = "disabled";
};
@@ -572,7 +617,7 @@
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&i2c6_hs_bus>;
- clocks = <&clock CLK_I2C6>;
+ clocks = <&clock CLK_USI2>;
clock-names = "hsi2c";
status = "disabled";
};
@@ -585,7 +630,7 @@
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&i2c7_hs_bus>;
- clocks = <&clock CLK_I2C7>;
+ clocks = <&clock CLK_USI3>;
clock-names = "hsi2c";
status = "disabled";
};
@@ -598,7 +643,7 @@
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&i2c8_hs_bus>;
- clocks = <&clock CLK_I2C8>;
+ clocks = <&clock CLK_USI4>;
clock-names = "hsi2c";
status = "disabled";
};
@@ -611,7 +656,7 @@
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&i2c9_hs_bus>;
- clocks = <&clock CLK_I2C9>;
+ clocks = <&clock CLK_USI5>;
clock-names = "hsi2c";
status = "disabled";
};
@@ -624,12 +669,12 @@
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&i2c10_hs_bus>;
- clocks = <&clock CLK_I2C10>;
+ clocks = <&clock CLK_USI6>;
clock-names = "hsi2c";
status = "disabled";
};
- hdmi@14530000 {
+ hdmi: hdmi@14530000 {
compatible = "samsung,exynos4212-hdmi";
reg = <0x14530000 0x70000>;
interrupts = <0 95 0>;
@@ -641,7 +686,7 @@
status = "disabled";
};
- mixer@14450000 {
+ mixer: mixer@14450000 {
compatible = "samsung,exynos5420-mixer";
reg = <0x14450000 0x10000>;
interrupts = <0 94 0>;
@@ -712,7 +757,7 @@
clock-names = "tmu_apbif", "tmu_triminfo_apbif";
};
- watchdog@101D0000 {
+ watchdog: watchdog@101D0000 {
compatible = "samsung,exynos5420-wdt";
reg = <0x101D0000 0x100>;
interrupts = <0 42 0>;
@@ -721,7 +766,7 @@
samsung,syscon-phandle = <&pmu_system_controller>;
};
- sss@10830000 {
+ sss: sss@10830000 {
compatible = "samsung,exynos4210-secss";
reg = <0x10830000 0x10000>;
interrupts = <0 112 0>;
diff --git a/arch/arm/boot/dts/omap3-evm-37xx.dts b/arch/arm/boot/dts/omap3-evm-37xx.dts
index 4df68ad3736a..9cba94bed7ad 100644
--- a/arch/arm/boot/dts/omap3-evm-37xx.dts
+++ b/arch/arm/boot/dts/omap3-evm-37xx.dts
@@ -89,7 +89,16 @@
status = "disabled";
};
+&uart1 {
+ interrupts-extended = <&intc 72 &omap3_pmx_core OMAP3_UART1_RX>;
+};
+
+&uart2 {
+ interrupts-extended = <&intc 73 &omap3_pmx_core OMAP3_UART2_RX>;
+};
+
&uart3 {
+ interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
pinctrl-names = "default";
pinctrl-0 = <&uart3_pins>;
};
diff --git a/arch/arm/boot/dts/omap3-ldp.dts b/arch/arm/boot/dts/omap3-ldp.dts
index 0abe986a4ecc..476ff158ddb3 100644
--- a/arch/arm/boot/dts/omap3-ldp.dts
+++ b/arch/arm/boot/dts/omap3-ldp.dts
@@ -234,6 +234,10 @@
};
};
+&uart3 {
+ interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
+};
+
&usb_otg_hs {
pinctrl-names = "default";
pinctrl-0 = <&musb_pins>;
diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
index 1a57b61f5e24..150ca097c02d 100644
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -21,6 +21,17 @@
};
};
+ leds {
+ compatible = "gpio-leds";
+ heartbeat {
+ label = "debug::sleep";
+ gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>; /* gpio162 */
+ linux,default-trigger = "default-on";
+ pinctrl-names = "default";
+ pinctrl-0 = <&debug_leds>;
+ };
+ };
+
memory {
device_type = "memory";
reg = <0x80000000 0x10000000>; /* 256 MB */
@@ -130,6 +141,12 @@
>;
};
+ debug_leds: pinmux_debug_led_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2198, PIN_OUTPUT | MUX_MODE4) /* mcbsp1_clkx.gpio_162 */
+ >;
+ };
+
mmc1_pins: pinmux_mmc1_pins {
pinctrl-single,pins = <
0x114 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk */
@@ -618,11 +635,13 @@
};
&uart2 {
+ interrupts-extended = <&intc 73 &omap3_pmx_core OMAP3_UART2_RX>;
pinctrl-names = "default";
pinctrl-0 = <&uart2_pins>;
};
&uart3 {
+ interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
pinctrl-names = "default";
pinctrl-0 = <&uart3_pins>;
};
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index 4231191ade06..3cc092b7cce7 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -267,7 +267,7 @@
uart1: serial@4806a000 {
compatible = "ti,omap3-uart";
reg = <0x4806a000 0x2000>;
- interrupts = <72>;
+ interrupts-extended = <&intc 72>;
dmas = <&sdma 49 &sdma 50>;
dma-names = "tx", "rx";
ti,hwmods = "uart1";
@@ -277,7 +277,7 @@
uart2: serial@4806c000 {
compatible = "ti,omap3-uart";
reg = <0x4806c000 0x400>;
- interrupts = <73>;
+ interrupts-extended = <&intc 73>;
dmas = <&sdma 51 &sdma 52>;
dma-names = "tx", "rx";
ti,hwmods = "uart2";
@@ -287,7 +287,7 @@
uart3: serial@49020000 {
compatible = "ti,omap3-uart";
reg = <0x49020000 0x400>;
- interrupts = <74>;
+ interrupts-extended = <&intc 74>;
dmas = <&sdma 53 &sdma 54>;
dma-names = "tx", "rx";
ti,hwmods = "uart3";
diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi
index d2c45bfaaa2c..8cfa3c8a72b0 100644
--- a/arch/arm/boot/dts/omap4-panda-common.dtsi
+++ b/arch/arm/boot/dts/omap4-panda-common.dtsi
@@ -481,6 +481,21 @@
usb-supply = <&vusb>;
};
+&uart2 {
+ interrupts-extended = <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH
+ &omap4_pmx_core OMAP4_UART2_RX>;
+};
+
+&uart3 {
+ interrupts-extended = <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH
+ &omap4_pmx_core OMAP4_UART3_RX>;
+};
+
+&uart4 {
+ interrupts-extended = <&gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH
+ &omap4_pmx_core OMAP4_UART4_RX>;
+};
+
&usb_otg_hs {
interface-type = <1>;
mode = <3>;
diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
index 48983c8d56c2..3e1da43068f6 100644
--- a/arch/arm/boot/dts/omap4-sdp.dts
+++ b/arch/arm/boot/dts/omap4-sdp.dts
@@ -570,16 +570,22 @@
};
&uart2 {
+ interrupts-extended = <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH
+ &omap4_pmx_core OMAP4_UART2_RX>;
pinctrl-names = "default";
pinctrl-0 = <&uart2_pins>;
};
&uart3 {
+ interrupts-extended = <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH
+ &omap4_pmx_core OMAP4_UART3_RX>;
pinctrl-names = "default";
pinctrl-0 = <&uart3_pins>;
};
&uart4 {
+ interrupts-extended = <&gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH
+ &omap4_pmx_core OMAP4_UART4_RX>;
pinctrl-names = "default";
pinctrl-0 = <&uart4_pins>;
};
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index 649b5cd38b40..b22664544a09 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -311,7 +311,7 @@
uart2: serial@4806c000 {
compatible = "ti,omap4-uart";
reg = <0x4806c000 0x100>;
- interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts-extended = <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart2";
clock-frequency = <48000000>;
};
@@ -319,7 +319,7 @@
uart3: serial@48020000 {
compatible = "ti,omap4-uart";
reg = <0x48020000 0x100>;
- interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts-extended = <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart3";
clock-frequency = <48000000>;
};
@@ -327,7 +327,7 @@
uart4: serial@4806e000 {
compatible = "ti,omap4-uart";
reg = <0x4806e000 0x100>;
- interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts-extended = <&gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart4";
clock-frequency = <48000000>;
};
diff --git a/arch/arm/boot/dts/orion5x-lacie-d2-network.dts b/arch/arm/boot/dts/orion5x-lacie-d2-network.dts
new file mode 100644
index 000000000000..c701e8d16bbb
--- /dev/null
+++ b/arch/arm/boot/dts/orion5x-lacie-d2-network.dts
@@ -0,0 +1,236 @@
+/*
+ * Copyright (C) 2014 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ * Copyright (C) 2009 Simon Guinot <sguinot@lacie.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "orion5x-mv88f5182.dtsi"
+
+/ {
+ model = "LaCie d2 Network";
+ compatible = "lacie,d2-network", "marvell,orion5x-88f5182", "marvell,orion5x";
+
+ memory {
+ reg = <0x00000000 0x4000000>; /* 64 MB */
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8 earlyprintk";
+ linux,stdout-path = &uart0;
+ };
+
+ soc {
+ ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>,
+ <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>,
+ <MBUS_ID(0x01, 0x0f) 0 0xfff80000 0x80000>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-0 = <&pmx_buttons>;
+ pinctrl-names = "default";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ front_button {
+ label = "Front Push Button";
+ linux,code = <KEY_POWER>;
+ gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
+ };
+
+ power_rocker_sw_on {
+ label = "Power rocker switch (on|auto)";
+ linux,input-type = <5>; /* EV_SW */
+ linux,code = <1>; /* D2NET_SWITCH_POWER_ON */
+ gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
+ };
+
+ power_rocker_sw_off {
+ label = "Power rocker switch (auto|off)";
+ linux,input-type = <5>; /* EV_SW */
+ linux,code = <2>; /* D2NET_SWITCH_POWER_OFF */
+ gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&pmx_sata0_power &pmx_sata1_power>;
+ pinctrl-names = "default";
+
+ sata0_power: regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "SATA0 Power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&gpio0 3 GPIO_ACTIVE_HIGH>;
+ };
+
+ sata1_power: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "SATA1 Power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&devbus_bootcs {
+ status = "okay";
+
+ devbus,keep-config;
+
+ /*
+ * Currently the MTD code does not recognize the MX29LV400CBCT
+ * as a bottom-type device. This could cause risks of
+ * accidentally erasing critical flash sectors. We thus define
+ * a single, write-protected partition covering the whole
+ * flash. TODO: once the flash part TOP/BOTTOM detection
+ * issue is sorted out in the MTD code, break this into at
+ * least three partitions: 'u-boot code', 'u-boot environment'
+ * and 'whatever is left'.
+ */
+ flash@0 {
+ compatible = "cfi-flash";
+ reg = <0 0x80000>;
+ bank-width = <1>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "Full512Kb";
+ reg = <0 0x80000>;
+ read-only;
+ };
+ };
+};
+
+&mdio {
+ status = "okay";
+
+ ethphy: ethernet-phy {
+ reg = <8>;
+ };
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&eth {
+ status = "okay";
+
+ ethernet-port@0 {
+ phy-handle = <&ethphy>;
+ };
+};
+
+&i2c {
+ status = "okay";
+ clock-frequency = <100000>;
+ #address-cells = <1>;
+
+ rtc@32 {
+ compatible = "ricoh,rs5c372b";
+ reg = <0x32>;
+ };
+
+ fan@3e {
+ compatible = "gmt,g762";
+ reg = <0x3e>;
+
+ /* Not enough HW info */
+ status = "disabled";
+ };
+
+ eeprom@50 {
+ compatible = "atmel,24c08";
+ reg = <0x50>;
+ };
+};
+
+&pinctrl {
+ pinctrl-0 = <&pmx_leds &pmx_board_id &pmx_fan_fail>;
+ pinctrl-names = "default";
+
+ pmx_board_id: pmx-board-id {
+ marvell,pins = "mpp0", "mpp1", "mpp2";
+ marvell,function = "gpio";
+ };
+
+ pmx_buttons: pmx-buttons {
+ marvell,pins = "mpp8", "mpp9", "mpp18";
+ marvell,function = "gpio";
+ };
+
+ pmx_fan_fail: pmx-fan-fail {
+ marvell,pins = "mpp5";
+ marvell,function = "gpio";
+ };
+
+ /*
+ * MPP6: Red front LED
+ * MPP16: Blue front LED blink control
+ */
+ pmx_leds: pmx-leds {
+ marvell,pins = "mpp6", "mpp16";
+ marvell,function = "gpio";
+ };
+
+ pmx_sata0_led_active: pmx-sata0-led-active {
+ marvell,pins = "mpp14";
+ marvell,function = "sata0";
+ };
+
+ pmx_sata0_power: pmx-sata0-power {
+ marvell,pins = "mpp3";
+ marvell,function = "gpio";
+ };
+
+ pmx_sata1_led_active: pmx-sata1-led-active {
+ marvell,pins = "mpp15";
+ marvell,function = "sata1";
+ };
+
+ pmx_sata1_power: pmx-sata1-power {
+ marvell,pins = "mpp12";
+ marvell,function = "gpio";
+ };
+
+ /*
+ * Non MPP GPIOs:
+ * GPIO 22: USB port 1 fuse (0 = Fail, 1 = Ok)
+ * GPIO 23: Blue front LED off
+ * GPIO 24: Inhibit board power off (0 = Disabled, 1 = Enabled)
+ */
+};
+
+&sata {
+ pinctrl-0 = <&pmx_sata0_led_active
+ &pmx_sata1_led_active>;
+ pinctrl-names = "default";
+ status = "okay";
+ nr-ports = <2>;
+};
+
+&uart0 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts b/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts
index 5ed6c1376901..89ff404a528c 100644
--- a/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts
+++ b/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts
@@ -6,8 +6,19 @@
* warranty of any kind, whether express or implied.
*/
+/*
+ * TODO: add Orion USB device port init when kernel.org support is added.
+ * TODO: add flash write support: see below.
+ * TODO: add power-off support.
+ * TODO: add I2C EEPROM support.
+ */
+
/dts-v1/;
-/include/ "orion5x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "orion5x-mv88f5182.dtsi"
/ {
model = "LaCie Ethernet Disk mini V2";
@@ -19,49 +30,84 @@
chosen {
bootargs = "console=ttyS0,115200n8 earlyprintk";
+ linux,stdout-path = &uart0;
};
- ocp@f1000000 {
- serial@12000 {
- clock-frequency = <166666667>;
- status = "okay";
- };
-
- sata@80000 {
- status = "okay";
- nr-ports = <2>;
- };
+ soc {
+ ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>,
+ <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>,
+ <MBUS_ID(0x01, 0x0f) 0 0xfff80000 0x80000>;
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
+ pinctrl-0 = <&pmx_power_button>;
+ pinctrl-names = "default";
#address-cells = <1>;
#size-cells = <0>;
button@1 {
label = "Power-on Switch";
- linux,code = <116>; /* KEY_POWER */
- gpios = <&gpio0 18 0>;
+ linux,code = <KEY_POWER>;
+ gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
};
};
- gpio_leds {
+ gpio-leds {
compatible = "gpio-leds";
+ pinctrl-0 = <&pmx_power_led>;
+ pinctrl-names = "default";
led@1 {
label = "power:blue";
- gpios = <&gpio0 16 1>;
+ gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
};
};
};
-&mdio {
+&devbus_bootcs {
status = "okay";
- ethphy: ethernet-phy {
- reg = <8>;
+ /* Read parameters */
+ devbus,bus-width = <8>;
+ devbus,turn-off-ps = <90000>;
+ devbus,badr-skew-ps = <0>;
+ devbus,acc-first-ps = <186000>;
+ devbus,acc-next-ps = <186000>;
+
+ /* Write parameters */
+ devbus,wr-high-ps = <90000>;
+ devbus,wr-low-ps = <90000>;
+ devbus,ale-wr-ps = <90000>;
+
+ /*
+ * Currently the MTD code does not recognize the MX29LV400CBCT
+ * as a bottom-type device. This could cause risks of
+ * accidentally erasing critical flash sectors. We thus define
+ * a single, write-protected partition covering the whole
+ * flash. TODO: once the flash part TOP/BOTTOM detection
+ * issue is sorted out in the MTD code, break this into at
+ * least three partitions: 'u-boot code', 'u-boot environment'
+ * and 'whatever is left'.
+ */
+ flash@0 {
+ compatible = "cfi-flash";
+ reg = <0 0x80000>;
+ bank-width = <1>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "Full512Kb";
+ reg = <0 0x80000>;
+ read-only;
+ };
};
};
+&ehci0 {
+ status = "okay";
+};
+
&eth {
status = "okay";
@@ -69,3 +115,60 @@
phy-handle = <&ethphy>;
};
};
+
+&i2c {
+ status = "okay";
+ clock-frequency = <100000>;
+ #address-cells = <1>;
+
+ rtc@32 {
+ compatible = "ricoh,rs5c372a";
+ reg = <0x32>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+&mdio {
+ status = "okay";
+
+ ethphy: ethernet-phy {
+ reg = <8>;
+ };
+};
+
+&pinctrl {
+ pinctrl-0 = <&pmx_rtc &pmx_power_led_ctrl>;
+ pinctrl-names = "default";
+
+ pmx_power_button: pmx-power-button {
+ marvell,pins = "mpp18";
+ marvell,function = "gpio";
+ };
+
+ pmx_power_led: pmx-power-led {
+ marvell,pins = "mpp16";
+ marvell,function = "gpio";
+ };
+
+ pmx_power_led_ctrl: pmx-power-led-ctrl {
+ marvell,pins = "mpp17";
+ marvell,function = "gpio";
+ };
+
+ pmx_rtc: pmx-rtc {
+ marvell,pins = "mpp3";
+ marvell,function = "gpio";
+ };
+};
+
+&sata {
+ pinctrl-0 = <&pmx_sata0 &pmx_sata1>;
+ pinctrl-names = "default";
+ status = "okay";
+ nr-ports = <2>;
+};
+
+&uart0 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/orion5x-maxtor-shared-storage-2.dts b/arch/arm/boot/dts/orion5x-maxtor-shared-storage-2.dts
new file mode 100644
index 000000000000..ff3484904294
--- /dev/null
+++ b/arch/arm/boot/dts/orion5x-maxtor-shared-storage-2.dts
@@ -0,0 +1,178 @@
+/*
+ * Copyright (C) 2014 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ * Copyright (C) Sylver Bruneau <sylver.bruneau@googlemail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "orion5x-mv88f5182.dtsi"
+
+/ {
+ model = "Maxtor Shared Storage II";
+ compatible = "maxtor,shared-storage-2", "marvell,orion5x-88f5182", "marvell,orion5x";
+
+ memory {
+ reg = <0x00000000 0x4000000>; /* 64 MB */
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8 earlyprintk";
+ linux,stdout-path = &uart0;
+ };
+
+ soc {
+ ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>,
+ <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>,
+ <MBUS_ID(0x01, 0x0f) 0 0xff800000 0x40000>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-0 = <&pmx_buttons>;
+ pinctrl-names = "default";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ power {
+ label = "Power";
+ linux,code = <KEY_POWER>;
+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+ };
+
+ reset {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&devbus_bootcs {
+ status = "okay";
+
+ devbus,keep-config;
+
+ /*
+ * Currently the MTD code does not recognize the MX29LV400CBCT
+ * as a bottom-type device. This could cause risks of
+ * accidentally erasing critical flash sectors. We thus define
+ * a single, write-protected partition covering the whole
+ * flash. TODO: once the flash part TOP/BOTTOM detection
+ * issue is sorted out in the MTD code, break this into at
+ * least three partitions: 'u-boot code', 'u-boot environment'
+ * and 'whatever is left'.
+ */
+ flash@0 {
+ compatible = "cfi-flash";
+ reg = <0 0x40000>;
+ bank-width = <1>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+};
+
+&mdio {
+ status = "okay";
+
+ ethphy: ethernet-phy {
+ reg = <8>;
+ };
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&eth {
+ status = "okay";
+
+ ethernet-port@0 {
+ phy-handle = <&ethphy>;
+ };
+};
+
+&i2c {
+ status = "okay";
+ clock-frequency = <100000>;
+ #address-cells = <1>;
+
+ rtc@68 {
+ compatible = "st,m41t81";
+ reg = <0x68>;
+ pinctrl-0 = <&pmx_rtc>;
+ pinctrl-names = "default";
+ interrupt-parent = <&gpio0>;
+ interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+&pinctrl {
+ pinctrl-0 = <&pmx_leds &pmx_misc>;
+ pinctrl-names = "default";
+
+ pmx_buttons: pmx-buttons {
+ marvell,pins = "mpp11", "mpp12";
+ marvell,function = "gpio";
+ };
+
+ /*
+ * MPP0: Power LED
+ * MPP1: Error LED
+ */
+ pmx_leds: pmx-leds {
+ marvell,pins = "mpp0", "mpp1";
+ marvell,function = "gpio";
+ };
+
+ /*
+ * MPP4: HDD ind. (Single/Dual)
+ * MPP5: HD0 5V control
+ * MPP6: HD0 12V control
+ * MPP7: HD1 5V control
+ * MPP8: HD1 12V control
+ */
+ pmx_misc: pmx-misc {
+ marvell,pins = "mpp4", "mpp5", "mpp6", "mpp7", "mpp8", "mpp10";
+ marvell,function = "gpio";
+ };
+
+ pmx_rtc: pmx-rtc {
+ marvell,pins = "mpp3";
+ marvell,function = "gpio";
+ };
+
+ pmx_sata0_led_active: pmx-sata0-led-active {
+ marvell,pins = "mpp14";
+ marvell,function = "sata0";
+ };
+
+ pmx_sata1_led_active: pmx-sata1-led-active {
+ marvell,pins = "mpp15";
+ marvell,function = "sata1";
+ };
+
+ /*
+ * Non MPP GPIOs:
+ * GPIO 22: USB port 1 fuse (0 = Fail, 1 = Ok)
+ * GPIO 23: Blue front LED off
+ * GPIO 24: Inhibit board power off (0 = Disabled, 1 = Enabled)
+ */
+};
+
+&sata {
+ pinctrl-0 = <&pmx_sata0_led_active
+ &pmx_sata1_led_active>;
+ pinctrl-names = "default";
+ status = "okay";
+ nr-ports = <2>;
+};
+
+&uart0 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/orion5x-mv88f5182.dtsi b/arch/arm/boot/dts/orion5x-mv88f5182.dtsi
new file mode 100644
index 000000000000..d1ed71c60209
--- /dev/null
+++ b/arch/arm/boot/dts/orion5x-mv88f5182.dtsi
@@ -0,0 +1,45 @@
+/*
+ * Copyright (C) 2014 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include "orion5x.dtsi"
+
+/ {
+ compatible = "marvell,orion5x-88f5182", "marvell,orion5x";
+
+ soc {
+ compatible = "marvell,orion5x-88f5182-mbus", "simple-bus";
+
+ internal-regs {
+ pinctrl: pinctrl@10000 {
+ compatible = "marvell,88f5182-pinctrl";
+ reg = <0x10000 0x8>, <0x10050 0x4>;
+
+ pmx_sata0: pmx-sata0 {
+ marvell,pins = "mpp12", "mpp14";
+ marvell,function = "sata0";
+ };
+
+ pmx_sata1: pmx-sata1 {
+ marvell,pins = "mpp13", "mpp15";
+ marvell,function = "sata1";
+ };
+ };
+
+ core_clk: core-clocks@10030 {
+ compatible = "marvell,mv88f5182-core-clock";
+ reg = <0x10010 0x4>;
+ #clock-cells = <1>;
+ };
+
+ mbusc: mbus-controller@20000 {
+ compatible = "marvell,mbus-controller";
+ reg = <0x20000 0x100>, <0x1500 0x20>;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/orion5x-rd88f5182-nas.dts b/arch/arm/boot/dts/orion5x-rd88f5182-nas.dts
new file mode 100644
index 000000000000..6fb052507b36
--- /dev/null
+++ b/arch/arm/boot/dts/orion5x-rd88f5182-nas.dts
@@ -0,0 +1,177 @@
+/*
+ * Copyright (C) 2014 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "orion5x-mv88f5182.dtsi"
+
+/ {
+ model = "Marvell Reference Design 88F5182 NAS";
+ compatible = "marvell,rd-88f5182-nas", "marvell,orion5x-88f5182", "marvell,orion5x";
+
+ memory {
+ reg = <0x00000000 0x4000000>; /* 64 MB */
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8 earlyprintk";
+ linux,stdout-path = &uart0;
+ };
+
+ soc {
+ ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>,
+ <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>,
+ <MBUS_ID(0x01, 0x0f) 0 0xf4000000 0x80000>,
+ <MBUS_ID(0x01, 0x1d) 0 0xfc000000 0x1000000>;
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&pmx_debug_led>;
+ pinctrl-names = "default";
+
+ led@0 {
+ label = "rd88f5182:cpu";
+ linux,default-trigger = "heartbeat";
+ gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&devbus_bootcs {
+ status = "okay";
+
+ /* Read parameters */
+ devbus,bus-width = <8>;
+ devbus,turn-off-ps = <90000>;
+ devbus,badr-skew-ps = <0>;
+ devbus,acc-first-ps = <186000>;
+ devbus,acc-next-ps = <186000>;
+
+ /* Write parameters */
+ devbus,wr-high-ps = <90000>;
+ devbus,wr-low-ps = <90000>;
+ devbus,ale-wr-ps = <90000>;
+
+ flash@0 {
+ compatible = "cfi-flash";
+ reg = <0 0x80000>;
+ bank-width = <1>;
+ };
+};
+
+&devbus_cs1 {
+ status = "okay";
+
+ /* Read parameters */
+ devbus,bus-width = <8>;
+ devbus,turn-off-ps = <90000>;
+ devbus,badr-skew-ps = <0>;
+ devbus,acc-first-ps = <186000>;
+ devbus,acc-next-ps = <186000>;
+
+ /* Write parameters */
+ devbus,wr-high-ps = <90000>;
+ devbus,wr-low-ps = <90000>;
+ devbus,ale-wr-ps = <90000>;
+
+ flash@0 {
+ compatible = "cfi-flash";
+ reg = <0 0x1000000>;
+ bank-width = <1>;
+ };
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&eth {
+ status = "okay";
+
+ ethernet-port@0 {
+ phy-handle = <&ethphy>;
+ };
+};
+
+&i2c {
+ status = "okay";
+ clock-frequency = <100000>;
+ #address-cells = <1>;
+
+ rtc@68 {
+ pinctrl-0 = <&pmx_rtc>;
+ pinctrl-names = "default";
+ compatible = "dallas,ds1338";
+ reg = <0x68>;
+ };
+};
+
+&mdio {
+ status = "okay";
+
+ ethphy: ethernet-phy {
+ reg = <8>;
+ };
+};
+
+&pinctrl {
+ pinctrl-0 = <&pmx_reset_switch &pmx_misc_gpios
+ &pmx_pci_gpios>;
+ pinctrl-names = "default";
+
+ /*
+ * MPP[20] PCI Clock to MV88F5182
+ * MPP[21] PCI Clock to mini PCI CON11
+ * MPP[22] USB 0 over current indication
+ * MPP[23] USB 1 over current indication
+ * MPP[24] USB 1 over current enable
+ * MPP[25] USB 0 over current enable
+ */
+
+ pmx_debug_led: pmx-debug_led {
+ marvell,pins = "mpp0";
+ marvell,function = "gpio";
+ };
+
+ pmx_reset_switch: pmx-reset-switch {
+ marvell,pins = "mpp1";
+ marvell,function = "gpio";
+ };
+
+ pmx_rtc: pmx-rtc {
+ marvell,pins = "mpp3";
+ marvell,function = "gpio";
+ };
+
+ pmx_misc_gpios: pmx-misc-gpios {
+ marvell,pins = "mpp4", "mpp5";
+ marvell,function = "gpio";
+ };
+
+ pmx_pci_gpios: pmx-pci-gpios {
+ marvell,pins = "mpp6", "mpp7";
+ marvell,function = "gpio";
+ };
+};
+
+&sata {
+ pinctrl-0 = <&pmx_sata0 &pmx_sata1>;
+ pinctrl-names = "default";
+ status = "okay";
+ nr-ports = <2>;
+};
+
+&uart0 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/orion5x.dtsi b/arch/arm/boot/dts/orion5x.dtsi
index 174d89241f70..75cd01bd6024 100644
--- a/arch/arm/boot/dts/orion5x.dtsi
+++ b/arch/arm/boot/dts/orion5x.dtsi
@@ -6,7 +6,9 @@
* warranty of any kind, whether express or implied.
*/
-/include/ "skeleton.dtsi"
+#include "skeleton.dtsi"
+
+#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
/ {
model = "Marvell Orion5x SoC";
@@ -17,149 +19,214 @@
gpio0 = &gpio0;
};
- intc: interrupt-controller {
- compatible = "marvell,orion-intc";
- interrupt-controller;
- #interrupt-cells = <1>;
- reg = <0xf1020200 0x08>;
- };
-
- ocp@f1000000 {
- compatible = "simple-bus";
- ranges = <0x00000000 0xf1000000 0x4000000
- 0xf2200000 0xf2200000 0x0000800>;
- #address-cells = <1>;
+ soc {
+ #address-cells = <2>;
#size-cells = <1>;
+ controller = <&mbusc>;
- gpio0: gpio@10100 {
- compatible = "marvell,orion-gpio";
- #gpio-cells = <2>;
- gpio-controller;
- reg = <0x10100 0x40>;
- ngpios = <32>;
- interrupt-controller;
- #interrupt-cells = <2>;
- interrupts = <6>, <7>, <8>, <9>;
- };
-
- spi@10600 {
- compatible = "marvell,orion-spi";
+ devbus_bootcs: devbus-bootcs {
+ compatible = "marvell,orion-devbus";
+ reg = <MBUS_ID(0xf0, 0x01) 0x1046C 0x4>;
+ ranges = <0 MBUS_ID(0x01, 0x0f) 0 0xffffffff>;
#address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- reg = <0x10600 0x28>;
+ #size-cells = <1>;
+ clocks = <&core_clk 0>;
status = "disabled";
};
- i2c@11000 {
- compatible = "marvell,mv64xxx-i2c";
- reg = <0x11000 0x20>;
+ devbus_cs0: devbus-cs0 {
+ compatible = "marvell,orion-devbus";
+ reg = <MBUS_ID(0xf0, 0x01) 0x1045C 0x4>;
+ ranges = <0 MBUS_ID(0x01, 0x1e) 0 0xffffffff>;
#address-cells = <1>;
- #size-cells = <0>;
- interrupts = <5>;
- clock-frequency = <100000>;
+ #size-cells = <1>;
+ clocks = <&core_clk 0>;
status = "disabled";
};
- serial@12000 {
- compatible = "ns16550a";
- reg = <0x12000 0x100>;
- reg-shift = <2>;
- interrupts = <3>;
- /* set clock-frequency in board dts */
+ devbus_cs1: devbus-cs1 {
+ compatible = "marvell,orion-devbus";
+ reg = <MBUS_ID(0xf0, 0x01) 0x10460 0x4>;
+ ranges = <0 MBUS_ID(0x01, 0x1d) 0 0xffffffff>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&core_clk 0>;
status = "disabled";
};
- serial@12100 {
- compatible = "ns16550a";
- reg = <0x12100 0x100>;
- reg-shift = <2>;
- interrupts = <4>;
- /* set clock-frequency in board dts */
+ devbus_cs2: devbus-cs2 {
+ compatible = "marvell,orion-devbus";
+ reg = <MBUS_ID(0xf0, 0x01) 0x10464 0x4>;
+ ranges = <0 MBUS_ID(0x01, 0x1b) 0 0xffffffff>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&core_clk 0>;
status = "disabled";
};
- wdt@20300 {
- compatible = "marvell,orion-wdt";
- reg = <0x20300 0x28>;
- status = "okay";
- };
+ internal-regs {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;
+
+ gpio0: gpio@10100 {
+ compatible = "marvell,orion-gpio";
+ #gpio-cells = <2>;
+ gpio-controller;
+ reg = <0x10100 0x40>;
+ ngpios = <32>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <6>, <7>, <8>, <9>;
+ };
- ehci@50000 {
- compatible = "marvell,orion-ehci";
- reg = <0x50000 0x1000>;
- interrupts = <17>;
- status = "disabled";
- };
+ spi: spi@10600 {
+ compatible = "marvell,orion-spi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <0>;
+ reg = <0x10600 0x28>;
+ status = "disabled";
+ };
- xor@60900 {
- compatible = "marvell,orion-xor";
- reg = <0x60900 0x100
- 0x60b00 0x100>;
- status = "okay";
+ i2c: i2c@11000 {
+ compatible = "marvell,mv64xxx-i2c";
+ reg = <0x11000 0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <5>;
+ clocks = <&core_clk 0>;
+ status = "disabled";
+ };
- xor00 {
- interrupts = <30>;
- dmacap,memcpy;
- dmacap,xor;
+ uart0: serial@12000 {
+ compatible = "ns16550a";
+ reg = <0x12000 0x100>;
+ reg-shift = <2>;
+ interrupts = <3>;
+ clocks = <&core_clk 0>;
+ status = "disabled";
};
- xor01 {
- interrupts = <31>;
- dmacap,memcpy;
- dmacap,xor;
- dmacap,memset;
+
+ uart1: serial@12100 {
+ compatible = "ns16550a";
+ reg = <0x12100 0x100>;
+ reg-shift = <2>;
+ interrupts = <4>;
+ clocks = <&core_clk 0>;
+ status = "disabled";
};
- };
- eth: ethernet-controller@72000 {
- compatible = "marvell,orion-eth";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x72000 0x4000>;
- marvell,tx-checksum-limit = <1600>;
- status = "disabled";
+ bridge_intc: bridge-interrupt-ctrl@20110 {
+ compatible = "marvell,orion-bridge-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0x20110 0x8>;
+ interrupts = <0>;
+ marvell,#interrupts = <4>;
+ };
- ethernet-port@0 {
- compatible = "marvell,orion-eth-port";
- reg = <0>;
- /* overwrite MAC address in bootloader */
- local-mac-address = [00 00 00 00 00 00];
- /* set phy-handle property in board file */
+ intc: interrupt-controller@20200 {
+ compatible = "marvell,orion-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0x20200 0x08>;
};
- };
- mdio: mdio-bus@72004 {
- compatible = "marvell,orion-mdio";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x72004 0x84>;
- interrupts = <22>;
- status = "disabled";
+ timer: timer@20300 {
+ compatible = "marvell,orion-timer";
+ reg = <0x20300 0x20>;
+ interrupt-parent = <&bridge_intc>;
+ interrupts = <1>, <2>;
+ clocks = <&core_clk 0>;
+ };
- /* add phy nodes in board file */
- };
+ wdt: wdt@20300 {
+ compatible = "marvell,orion-wdt";
+ reg = <0x20300 0x28>;
+ interrupt-parent = <&bridge_intc>;
+ interrupts = <3>;
+ status = "okay";
+ };
- sata@80000 {
- compatible = "marvell,orion-sata";
- reg = <0x80000 0x5000>;
- interrupts = <29>;
- status = "disabled";
+ ehci0: ehci@50000 {
+ compatible = "marvell,orion-ehci";
+ reg = <0x50000 0x1000>;
+ interrupts = <17>;
+ status = "disabled";
+ };
+
+ xor: dma-controller@60900 {
+ compatible = "marvell,orion-xor";
+ reg = <0x60900 0x100
+ 0x60b00 0x100>;
+ status = "okay";
+
+ xor00 {
+ interrupts = <30>;
+ dmacap,memcpy;
+ dmacap,xor;
+ };
+ xor01 {
+ interrupts = <31>;
+ dmacap,memcpy;
+ dmacap,xor;
+ dmacap,memset;
+ };
+ };
+
+ eth: ethernet-controller@72000 {
+ compatible = "marvell,orion-eth";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x72000 0x4000>;
+ marvell,tx-checksum-limit = <1600>;
+ status = "disabled";
+
+ ethport: ethernet-port@0 {
+ compatible = "marvell,orion-eth-port";
+ reg = <0>;
+ interrupts = <21>;
+ /* overwrite MAC address in bootloader */
+ local-mac-address = [00 00 00 00 00 00];
+ /* set phy-handle property in board file */
+ };
+ };
+
+ mdio: mdio-bus@72004 {
+ compatible = "marvell,orion-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x72004 0x84>;
+ interrupts = <22>;
+ status = "disabled";
+
+ /* add phy nodes in board file */
+ };
+
+ sata: sata@80000 {
+ compatible = "marvell,orion-sata";
+ reg = <0x80000 0x5000>;
+ interrupts = <29>;
+ status = "disabled";
+ };
+
+ ehci1: ehci@a0000 {
+ compatible = "marvell,orion-ehci";
+ reg = <0xa0000 0x1000>;
+ interrupts = <12>;
+ status = "disabled";
+ };
};
- crypto@90000 {
+ cesa: crypto@90000 {
compatible = "marvell,orion-crypto";
- reg = <0x90000 0x10000>,
- <0xf2200000 0x800>;
+ reg = <MBUS_ID(0xf0, 0x01) 0x90000 0x10000>,
+ <MBUS_ID(0x09, 0x00) 0x0 0x800>;
reg-names = "regs", "sram";
interrupts = <28>;
status = "okay";
};
-
- ehci@a0000 {
- compatible = "marvell,orion-ehci";
- reg = <0xa0000 0x1000>;
- interrupts = <12>;
- status = "disabled";
- };
};
};
diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi
index 2551e9438d35..97a9545f5232 100644
--- a/arch/arm/boot/dts/r8a7740.dtsi
+++ b/arch/arm/boot/dts/r8a7740.dtsi
@@ -22,6 +22,7 @@
compatible = "arm,cortex-a9";
device_type = "cpu";
reg = <0x0>;
+ clock-frequency = <800000000>;
};
};
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 618e5b537eaf..10b326bdf831 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -673,7 +673,7 @@
renesas,clock-indices = <
R8A7790_CLK_TMU1 R8A7790_CLK_TMU3 R8A7790_CLK_TMU2
R8A7790_CLK_CMT0 R8A7790_CLK_TMU0 R8A7790_CLK_VSP1_DU1
- R8A7790_CLK_VSP1_DU0 R8A7790_CLK_VSP1_RT R8A7790_CLK_VSP1_SY
+ R8A7790_CLK_VSP1_DU0 R8A7790_CLK_VSP1_R R8A7790_CLK_VSP1_S
>;
clock-output-names =
"tmu1", "tmu3", "tmu2", "cmt0", "tmu0", "vsp1-du1",
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 46181708e59c..aa1cba94196c 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -688,7 +688,7 @@
renesas,clock-indices = <
R8A7791_CLK_TMU1 R8A7791_CLK_TMU3 R8A7791_CLK_TMU2
R8A7791_CLK_CMT0 R8A7791_CLK_TMU0 R8A7791_CLK_VSP1_DU1
- R8A7791_CLK_VSP1_DU0 R8A7791_CLK_VSP1_SY
+ R8A7791_CLK_VSP1_DU0 R8A7791_CLK_VSP1_S
>;
clock-output-names =
"tmu1", "tmu3", "tmu2", "cmt0", "tmu0", "vsp1-du1",
diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi
index 4d4dfbb59f4b..90b354db16a0 100644
--- a/arch/arm/boot/dts/rk3066a.dtsi
+++ b/arch/arm/boot/dts/rk3066a.dtsi
@@ -24,6 +24,7 @@
cpus {
#address-cells = <1>;
#size-cells = <0>;
+ enable-method = "rockchip,rk3066-smp";
cpu@0 {
device_type = "cpu";
diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi
index ed9a70af3e3f..2b494ceef6fc 100644
--- a/arch/arm/boot/dts/rk3188.dtsi
+++ b/arch/arm/boot/dts/rk3188.dtsi
@@ -24,6 +24,7 @@
cpus {
#address-cells = <1>;
#size-cells = <0>;
+ enable-method = "rockchip,rk3066-smp";
cpu@0 {
device_type = "cpu";
diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi
index a106b0872910..3f260b9cd51f 100644
--- a/arch/arm/boot/dts/sama5d3.dtsi
+++ b/arch/arm/boot/dts/sama5d3.dtsi
@@ -58,6 +58,18 @@
reg = <0x20000000 0x8000000>;
};
+ slow_xtal: slow_xtal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ main_xtal: main_xtal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
clocks {
adc_op_clk: adc_op_clk{
compatible = "fixed-clock";
@@ -749,18 +761,29 @@
#size-cells = <0>;
#interrupt-cells = <1>;
- clk32k: slck {
- compatible = "fixed-clock";
+ main_rc_osc: main_rc_osc {
+ compatible = "atmel,at91sam9x5-clk-main-rc-osc";
#clock-cells = <0>;
- clock-frequency = <32768>;
+ interrupt-parent = <&pmc>;
+ interrupts = <AT91_PMC_MOSCRCS>;
+ clock-frequency = <12000000>;
+ clock-accuracy = <50000000>;
};
- main: mainck {
- compatible = "atmel,at91rm9200-clk-main";
+ main_osc: main_osc {
+ compatible = "atmel,at91rm9200-clk-main-osc";
#clock-cells = <0>;
interrupt-parent = <&pmc>;
interrupts = <AT91_PMC_MOSCS>;
- clocks = <&clk32k>;
+ clocks = <&main_xtal>;
+ };
+
+ main: mainck {
+ compatible = "atmel,at91sam9x5-clk-main";
+ #clock-cells = <0>;
+ interrupt-parent = <&pmc>;
+ interrupts = <AT91_PMC_MOSCSELS>;
+ clocks = <&main_rc_osc &main_osc>;
};
plla: pllack {
@@ -1089,6 +1112,32 @@
status = "disabled";
};
+ sckc@fffffe50 {
+ compatible = "atmel,at91sam9x5-sckc";
+ reg = <0xfffffe50 0x4>;
+
+ slow_rc_osc: slow_rc_osc {
+ compatible = "atmel,at91sam9x5-clk-slow-rc-osc";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-accuracy = <50000000>;
+ atmel,startup-time-usec = <75>;
+ };
+
+ slow_osc: slow_osc {
+ compatible = "atmel,at91sam9x5-clk-slow-osc";
+ #clock-cells = <0>;
+ clocks = <&slow_xtal>;
+ atmel,startup-time-usec = <1200000>;
+ };
+
+ clk32k: slowck {
+ compatible = "atmel,at91sam9x5-clk-slow";
+ #clock-cells = <0>;
+ clocks = <&slow_rc_osc &slow_osc>;
+ };
+ };
+
rtc@fffffeb0 {
compatible = "atmel,at91rm9200-rtc";
reg = <0xfffffeb0 0x30>;
diff --git a/arch/arm/boot/dts/sama5d3xcm.dtsi b/arch/arm/boot/dts/sama5d3xcm.dtsi
index f55ed072c8e6..b0b1331c1974 100644
--- a/arch/arm/boot/dts/sama5d3xcm.dtsi
+++ b/arch/arm/boot/dts/sama5d3xcm.dtsi
@@ -18,6 +18,14 @@
reg = <0x20000000 0x20000000>;
};
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
+
+ main_xtal {
+ clock-frequency = <12000000>;
+ };
+
ahb {
apb {
spi0: spi@f0004000 {
diff --git a/arch/arm/boot/dts/twl4030_omap3.dtsi b/arch/arm/boot/dts/twl4030_omap3.dtsi
index c353ef0a6ac7..3537ae5b2146 100644
--- a/arch/arm/boot/dts/twl4030_omap3.dtsi
+++ b/arch/arm/boot/dts/twl4030_omap3.dtsi
@@ -8,7 +8,7 @@
&twl {
pinctrl-names = "default";
- pinctrl-0 = <&twl4030_pins>;
+ pinctrl-0 = <&twl4030_pins &twl4030_vpins>;
};
&omap3_pmx_core {
@@ -23,3 +23,20 @@
>;
};
};
+
+/*
+ * If your board is not using the I2C4 pins with twl4030, then don't include
+ * this file. For proper idle mode signaling with sys_clkreq and sys_off_mode
+ * pins we need to configure I2C4, or else use the legacy sys_nvmode1 and
+ * sys_nvmode2 signaling.
+ */
+&omap3_pmx_wkup {
+ twl4030_vpins: pinmux_twl4030_vpins {
+ pinctrl-single,pins = <
+ OMAP3_WKUP_IOPAD(0x2a00, PIN_INPUT | MUX_MODE0) /* i2c4_scl.i2c4_scl */
+ OMAP3_WKUP_IOPAD(0x2a02, PIN_INPUT | MUX_MODE0) /* i2c4_sda.i2c4_sda */
+ OMAP3_WKUP_IOPAD(0x2a06, PIN_OUTPUT | MUX_MODE0) /* sys_clkreq.sys_clkreq */
+ OMAP3_WKUP_IOPAD(0x2a18, PIN_OUTPUT | MUX_MODE0) /* sys_off_mode.sys_off_mode */
+ >;
+ };
+};
diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi
index c1176abc34d9..80d8e4f3f626 100644
--- a/arch/arm/boot/dts/zynq-7000.dtsi
+++ b/arch/arm/boot/dts/zynq-7000.dtsi
@@ -177,6 +177,11 @@
};
};
+ devcfg: devcfg@f8007000 {
+ compatible = "xlnx,zynq-devcfg-1.0";
+ reg = <0xf8007000 0x100>;
+ } ;
+
global_timer: timer@f8f00200 {
compatible = "arm,cortex-a9-global-timer";
reg = <0xf8f00200 0x20>;
diff --git a/arch/arm/configs/at91sam9g45_defconfig b/arch/arm/configs/at91sam9g45_defconfig
index e181a50fd65a..c6661a60025d 100644
--- a/arch/arm/configs/at91sam9g45_defconfig
+++ b/arch/arm/configs/at91sam9g45_defconfig
@@ -83,7 +83,6 @@ CONFIG_KEYBOARD_GPIO=y
# CONFIG_INPUT_MOUSE is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ATMEL_MXT=m
-CONFIG_TOUCHSCREEN_ATMEL_TSADCC=y
# CONFIG_SERIO is not set
# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_ATMEL=y
@@ -146,6 +145,8 @@ CONFIG_DMADEVICES=y
CONFIG_AT_HDMAC=y
CONFIG_DMATEST=m
# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_IIO=y
+CONFIG_AT91_ADC=y
CONFIG_EXT4_FS=y
CONFIG_FANOTIFY=y
CONFIG_VFAT_FS=y
diff --git a/arch/arm/configs/at91sam9rl_defconfig b/arch/arm/configs/at91sam9rl_defconfig
index 85f846ae9ff2..5d7797d43d23 100644
--- a/arch/arm/configs/at91sam9rl_defconfig
+++ b/arch/arm/configs/at91sam9rl_defconfig
@@ -45,7 +45,6 @@ CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_ATMEL_TSADCC=y
# CONFIG_SERIO is not set
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
@@ -65,6 +64,8 @@ CONFIG_MMC=y
CONFIG_MMC_ATMELMCI=m
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_AT91SAM9=y
+CONFIG_IIO=y
+CONFIG_AT91_ADC=y
CONFIG_EXT2_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
diff --git a/arch/arm/configs/axm55xx_defconfig b/arch/arm/configs/axm55xx_defconfig
new file mode 100644
index 000000000000..d3260d7d5af1
--- /dev/null
+++ b/arch/arm/configs/axm55xx_defconfig
@@ -0,0 +1,248 @@
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_FHANDLE=y
+CONFIG_AUDIT=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+CONFIG_SCHED_AUTOGROUP=y
+CONFIG_RELAY=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_EMBEDDED=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_PROFILING=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_ARCH_AXXIA=y
+CONFIG_GPIO_PCA953X=y
+CONFIG_ARM_LPAE=y
+CONFIG_ARM_THUMBEE=y
+CONFIG_ARM_ERRATA_430973=y
+CONFIG_ARM_ERRATA_643719=y
+CONFIG_ARM_ERRATA_720789=y
+CONFIG_ARM_ERRATA_754322=y
+CONFIG_ARM_ERRATA_754327=y
+CONFIG_ARM_ERRATA_764369=y
+CONFIG_ARM_ERRATA_775420=y
+CONFIG_ARM_ERRATA_798181=y
+CONFIG_PCI=y
+CONFIG_PCI_MSI=y
+CONFIG_PCIE_AXXIA=y
+CONFIG_SMP=y
+CONFIG_NR_CPUS=16
+CONFIG_HOTPLUG_CPU=y
+CONFIG_PREEMPT=y
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_HIGHMEM=y
+CONFIG_KSM=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_ARM_ATAG_DTB_COMPAT=y
+CONFIG_VFP=y
+CONFIG_NEON=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_BINFMT_MISC=y
+# CONFIG_SUSPEND is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM_USER=y
+CONFIG_XFRM_SUB_POLICY=y
+CONFIG_XFRM_MIGRATE=y
+CONFIG_XFRM_STATISTICS=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_INET_AH=y
+CONFIG_INET_ESP=y
+CONFIG_INET_IPCOMP=y
+# CONFIG_INET_LRO is not set
+# CONFIG_IPV6 is not set
+CONFIG_NETWORK_PHY_TIMESTAMPING=y
+CONFIG_BRIDGE=y
+# CONFIG_WIRELESS is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_AFS_PARTS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_MTD_M25P80=y
+CONFIG_PROC_DEVICETREE=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_EEPROM_AT24=y
+CONFIG_EEPROM_AT25=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_SG=y
+CONFIG_ATA=y
+CONFIG_PATA_PLATFORM=y
+CONFIG_PATA_OF_PLATFORM=y
+CONFIG_MD=y
+CONFIG_BLK_DEV_DM=y
+CONFIG_DM_UEVENT=y
+CONFIG_NETDEVICES=y
+CONFIG_TUN=y
+CONFIG_VETH=y
+CONFIG_VIRTIO_NET=y
+# CONFIG_NET_CADENCE is not set
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_CIRRUS is not set
+# CONFIG_NET_VENDOR_FARADAY is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
+# CONFIG_NET_VENDOR_VIA is not set
+# CONFIG_NET_VENDOR_WIZNET is not set
+CONFIG_BROADCOM_PHY=y
+# CONFIG_WLAN is not set
+# CONFIG_MOUSE_PS2_ALPS is not set
+# CONFIG_MOUSE_PS2_LOGIPS2PP is not set
+# CONFIG_MOUSE_PS2_SYNAPTICS is not set
+# CONFIG_MOUSE_PS2_TRACKPOINT is not set
+# CONFIG_SERIO_SERPORT is not set
+CONFIG_SERIO_AMBAKMI=y
+CONFIG_LEGACY_PTY_COUNT=16
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_VIRTIO_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_MUX=y
+CONFIG_I2C_AXXIA=y
+CONFIG_SPI=y
+CONFIG_SPI_PL022=y
+CONFIG_DP83640_PHY=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_PL061=y
+CONFIG_POWER_SUPPLY=y
+CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_AXXIA=y
+CONFIG_SENSORS_ADT7475=y
+CONFIG_SENSORS_JC42=y
+CONFIG_SENSORS_LM75=y
+CONFIG_PMBUS=y
+CONFIG_SENSORS_LTC2978=y
+CONFIG_WATCHDOG=y
+CONFIG_ARM_SP805_WATCHDOG=y
+CONFIG_FB=y
+CONFIG_FB_ARMCLCD=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_DRAGONRISE=y
+CONFIG_HID_EZKEY=y
+CONFIG_HID_KYE=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_TWINHAN=y
+CONFIG_HID_KENSINGTON=y
+CONFIG_HID_LOGITECH=y
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+CONFIG_HID_NTRIG=y
+CONFIG_HID_ORTEK=y
+CONFIG_HID_PANTHERLORD=y
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SUNPLUS=y
+CONFIG_HID_GREENASIA=y
+CONFIG_HID_SMARTJOYPLUS=y
+CONFIG_HID_TOPSEED=y
+CONFIG_HID_THRUSTMASTER=y
+CONFIG_HID_ZEROPLUS=y
+CONFIG_USB=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+CONFIG_USB_EHCI_HCD_AXXIA=y
+CONFIG_USB_STORAGE=y
+CONFIG_MMC=y
+CONFIG_MMC_ARMMMCI=y
+CONFIG_DMADEVICES=y
+CONFIG_PL330_DMA=y
+CONFIG_VIRT_DRIVERS=y
+CONFIG_VIRTIO_MMIO=y
+CONFIG_MAILBOX=y
+CONFIG_PL320_MBOX=y
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT4_FS=y
+CONFIG_AUTOFS4_FS=y
+CONFIG_FUSE_FS=y
+CONFIG_CUSE=y
+CONFIG_FSCACHE=y
+CONFIG_FSCACHE_STATS=y
+CONFIG_FSCACHE_HISTOGRAM=y
+CONFIG_FSCACHE_DEBUG=y
+CONFIG_FSCACHE_OBJECT_LIST=y
+CONFIG_CACHEFILES=y
+CONFIG_CACHEFILES_HISTOGRAM=y
+CONFIG_ISO9660_FS=y
+CONFIG_UDF_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_NTFS_FS=y
+CONFIG_TMPFS=y
+CONFIG_JFFS2_FS=y
+CONFIG_CRAMFS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_NFS_FSCACHE=y
+CONFIG_SUNRPC_DEBUG=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_PRINTK_TIME=y
+CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_FS=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_SCHED_DEBUG is not set
+CONFIG_RCU_CPU_STALL_TIMEOUT=60
+# CONFIG_FTRACE is not set
+CONFIG_DEBUG_USER=y
+CONFIG_CRYPTO_GCM=y
+CONFIG_CRYPTO_XCBC=y
+CONFIG_CRYPTO_SHA256=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_VIRTUALIZATION=y
+CONFIG_KVM=y
diff --git a/arch/arm/configs/bcm_defconfig b/arch/arm/configs/bcm_defconfig
index 3df3f3a79ef4..9d13dae99125 100644
--- a/arch/arm/configs/bcm_defconfig
+++ b/arch/arm/configs/bcm_defconfig
@@ -91,6 +91,7 @@ CONFIG_FB=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_PWM=y
# CONFIG_USB_SUPPORT is not set
CONFIG_MMC=y
CONFIG_MMC_UNSAFE_RESUME=y
@@ -104,6 +105,8 @@ CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+CONFIG_PWM=y
+CONFIG_PWM_BCM_KONA=y
CONFIG_EXT4_FS=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig
index f1aeb7d72712..bada59d93b67 100644
--- a/arch/arm/configs/imx_v4_v5_defconfig
+++ b/arch/arm/configs/imx_v4_v5_defconfig
@@ -80,6 +80,7 @@ CONFIG_MTD_UBI=y
CONFIG_EEPROM_AT24=y
CONFIG_EEPROM_AT25=y
CONFIG_ATA=y
+CONFIG_BLK_DEV_SD=y
CONFIG_PATA_IMX=y
CONFIG_NETDEVICES=y
CONFIG_CS89x0=y
@@ -153,8 +154,12 @@ CONFIG_USB_HID=m
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_MXC=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_CHIPIDEA=y
+CONFIG_USB_CHIPIDEA_UDC=y
+CONFIG_USB_CHIPIDEA_HOST=y
+CONFIG_NOP_USB_XCEIV=y
CONFIG_MMC=y
-CONFIG_MMC_UNSAFE_RESUME=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_SDHCI_ESDHC_IMX=y
@@ -177,7 +182,6 @@ CONFIG_RTC_DRV_MXC=y
CONFIG_DMADEVICES=y
CONFIG_IMX_SDMA=y
CONFIG_IMX_DMA=y
-CONFIG_COMMON_CLK_DEBUG=y
# CONFIG_IOMMU_SUPPORT is not set
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index 09e974392fa1..ef8815327e5b 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -1,4 +1,3 @@
-# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_KERNEL_LZO=y
CONFIG_SYSVIPC=y
CONFIG_NO_HZ=y
@@ -33,7 +32,6 @@ CONFIG_MACH_PCM043=y
CONFIG_MACH_MX35_3DS=y
CONFIG_MACH_VPR200=y
CONFIG_MACH_IMX51_DT=y
-CONFIG_MACH_EUKREA_CPUIMX51SD=y
CONFIG_SOC_IMX50=y
CONFIG_SOC_IMX53=y
CONFIG_SOC_IMX6Q=y
@@ -46,7 +44,11 @@ CONFIG_VMSPLIT_2G=y
CONFIG_PREEMPT_VOLUNTARY=y
CONFIG_AEABI=y
CONFIG_HIGHMEM=y
+CONFIG_CMA=y
CONFIG_CMDLINE="noinitrd console=ttymxc0,115200"
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
+CONFIG_ARM_IMX6Q_CPUFREQ=y
CONFIG_VFP=y
CONFIG_NEON=y
CONFIG_BINFMT_MISC=m
@@ -72,6 +74,7 @@ CONFIG_RFKILL_INPUT=y
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
# CONFIG_STANDALONE is not set
+CONFIG_DMA_CMA=y
CONFIG_IMX_WEIM=y
CONFIG_CONNECTOR=y
CONFIG_MTD=y
@@ -89,6 +92,7 @@ CONFIG_MTD_SST25L=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_GPMI_NAND=y
CONFIG_MTD_NAND_MXC=y
+CONFIG_MTD_SPI_NOR=y
CONFIG_MTD_UBI=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
@@ -183,6 +187,7 @@ CONFIG_V4L_MEM2MEM_DRIVERS=y
CONFIG_VIDEO_CODA=y
CONFIG_SOC_CAMERA_OV2640=y
CONFIG_DRM=y
+CONFIG_DRM_PANEL_SIMPLE=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_LCD_L4F00242T03=y
@@ -215,7 +220,6 @@ CONFIG_USB_GADGET=y
CONFIG_USB_ETH=m
CONFIG_USB_MASS_STORAGE=m
CONFIG_MMC=y
-CONFIG_MMC_UNSAFE_RESUME=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_SDHCI_ESDHC_IMX=y
@@ -245,7 +249,7 @@ CONFIG_DRM_IMX_TVE=y
CONFIG_DRM_IMX_LDB=y
CONFIG_DRM_IMX_IPUV3_CORE=y
CONFIG_DRM_IMX_IPUV3=y
-CONFIG_COMMON_CLK_DEBUG=y
+CONFIG_DRM_IMX_HDMI=y
# CONFIG_IOMMU_SUPPORT is not set
CONFIG_PWM=y
CONFIG_PWM_IMX=y
diff --git a/arch/arm/configs/mxs_defconfig b/arch/arm/configs/mxs_defconfig
index 6150108e15de..a9f992335eb2 100644
--- a/arch/arm/configs/mxs_defconfig
+++ b/arch/arm/configs/mxs_defconfig
@@ -26,7 +26,6 @@ CONFIG_ARCH_MXS=y
# CONFIG_ARM_THUMB is not set
CONFIG_PREEMPT_VOLUNTARY=y
CONFIG_AEABI=y
-CONFIG_FPE_NWFPE=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
@@ -51,10 +50,10 @@ CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_DATAFLASH=y
CONFIG_MTD_M25P80=y
-# CONFIG_M25PXX_USE_FAST_READ is not set
CONFIG_MTD_SST25L=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_GPMI_NAND=y
+CONFIG_MTD_SPI_NOR=y
CONFIG_MTD_UBI=y
# CONFIG_BLK_DEV is not set
CONFIG_EEPROM_AT24=y
@@ -120,7 +119,6 @@ CONFIG_USB_GADGET=y
CONFIG_USB_ETH=m
CONFIG_USB_MASS_STORAGE=m
CONFIG_MMC=y
-CONFIG_MMC_UNSAFE_RESUME=y
CONFIG_MMC_MXS=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
@@ -138,7 +136,6 @@ CONFIG_DMADEVICES=y
CONFIG_MXS_DMA=y
CONFIG_STAGING=y
CONFIG_MXS_LRADC=y
-CONFIG_COMMON_CLK_DEBUG=y
CONFIG_IIO=y
CONFIG_IIO_SYSFS_TRIGGER=y
CONFIG_PWM=y
@@ -180,7 +177,7 @@ CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_STRICT_DEVMEM=y
CONFIG_DEBUG_USER=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
+CONFIG_CRYPTO_DEV_MXS_DCP=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC7=m
CONFIG_FONTS=y
diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index a4e8d017f25b..28f3b6e3b589 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -21,6 +21,8 @@ CONFIG_MODULE_SRCVERSION_ALL=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_PARTITION_ADVANCED=y
CONFIG_ARCH_MULTI_V6=y
+CONFIG_POWER_AVS_OMAP=y
+CONFIG_POWER_AVS_OMAP_CLASS3=y
CONFIG_OMAP_RESET_CLOCKS=y
CONFIG_OMAP_MUX_DEBUG=y
CONFIG_ARCH_OMAP2=y
@@ -42,6 +44,7 @@ CONFIG_ARM_ATAG_DTB_COMPAT=y
CONFIG_CMDLINE="root=/dev/mmcblk0p2 rootwait console=ttyO2,115200"
CONFIG_KEXEC=y
CONFIG_FPE_NWFPE=y
+CONFIG_CPU_IDLE=y
CONFIG_BINFMT_MISC=y
CONFIG_PM_DEBUG=y
CONFIG_NET=y
@@ -159,11 +162,14 @@ CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_TWL4030=y
CONFIG_W1=y
CONFIG_POWER_SUPPLY=y
+CONFIG_POWER_AVS=y
CONFIG_SENSORS_LM75=m
CONFIG_THERMAL=y
CONFIG_THERMAL_GOV_FAIR_SHARE=y
CONFIG_THERMAL_GOV_USER_SPACE=y
+CONFIG_CPU_THERMAL=y
CONFIG_TI_SOC_THERMAL=y
+CONFIG_TI_THERMAL=y
CONFIG_OMAP4_THERMAL=y
CONFIG_OMAP5_THERMAL=y
CONFIG_DRA752_THERMAL=y
@@ -177,6 +183,7 @@ CONFIG_MFD_TPS65910=y
CONFIG_TWL6040_CORE=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_PALMAS=y
+CONFIG_REGULATOR_TI_ABB=y
CONFIG_REGULATOR_TPS65023=y
CONFIG_REGULATOR_TPS6507X=y
CONFIG_REGULATOR_TPS65217=y
@@ -239,6 +246,7 @@ CONFIG_SDIO_UART=y
CONFIG_MMC_OMAP=y
CONFIG_MMC_OMAP_HS=y
CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
diff --git a/arch/arm/configs/sama5_defconfig b/arch/arm/configs/sama5_defconfig
index dc3881e07630..869fa18ebeb2 100644
--- a/arch/arm/configs/sama5_defconfig
+++ b/arch/arm/configs/sama5_defconfig
@@ -122,7 +122,6 @@ CONFIG_KEYBOARD_GPIO=y
# CONFIG_INPUT_MOUSE is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ATMEL_MXT=y
-CONFIG_TOUCHSCREEN_ATMEL_TSADCC=y
# CONFIG_SERIO is not set
CONFIG_LEGACY_PTY_COUNT=4
CONFIG_SERIAL_ATMEL=y
diff --git a/arch/arm/include/debug/imx-uart.h b/arch/arm/include/debug/imx-uart.h
index 42b823cd2d22..032a316eb802 100644
--- a/arch/arm/include/debug/imx-uart.h
+++ b/arch/arm/include/debug/imx-uart.h
@@ -81,6 +81,15 @@
#define IMX6SL_UART_BASE_ADDR(n) IMX6SL_UART##n##_BASE_ADDR
#define IMX6SL_UART_BASE(n) IMX6SL_UART_BASE_ADDR(n)
+#define IMX6SX_UART1_BASE_ADDR 0x02020000
+#define IMX6SX_UART2_BASE_ADDR 0x021e8000
+#define IMX6SX_UART3_BASE_ADDR 0x021ec000
+#define IMX6SX_UART4_BASE_ADDR 0x021f0000
+#define IMX6SX_UART5_BASE_ADDR 0x021f4000
+#define IMX6SX_UART6_BASE_ADDR 0x022a0000
+#define IMX6SX_UART_BASE_ADDR(n) IMX6SX_UART##n##_BASE_ADDR
+#define IMX6SX_UART_BASE(n) IMX6SX_UART_BASE_ADDR(n)
+
#define IMX_DEBUG_UART_BASE(soc) soc##_UART_BASE(CONFIG_DEBUG_IMX_UART_PORT)
#ifdef CONFIG_DEBUG_IMX1_UART
@@ -103,6 +112,8 @@
#define UART_PADDR IMX_DEBUG_UART_BASE(IMX6Q)
#elif defined(CONFIG_DEBUG_IMX6SL_UART)
#define UART_PADDR IMX_DEBUG_UART_BASE(IMX6SL)
+#elif defined(CONFIG_DEBUG_IMX6SX_UART)
+#define UART_PADDR IMX_DEBUG_UART_BASE(IMX6SX)
#endif
#endif /* __DEBUG_IMX_UART_H */
diff --git a/arch/arm/include/debug/msm.S b/arch/arm/include/debug/msm.S
index 9d653d475903..9ef57612811d 100644
--- a/arch/arm/include/debug/msm.S
+++ b/arch/arm/include/debug/msm.S
@@ -15,51 +15,15 @@
*
*/
-#if defined(CONFIG_ARCH_MSM7X00A) || defined(CONFIG_ARCH_QSD8X50)
-#define MSM_UART1_PHYS 0xA9A00000
-#define MSM_UART2_PHYS 0xA9B00000
-#define MSM_UART3_PHYS 0xA9C00000
-#elif defined(CONFIG_ARCH_MSM7X30)
-#define MSM_UART1_PHYS 0xACA00000
-#define MSM_UART2_PHYS 0xACB00000
-#define MSM_UART3_PHYS 0xACC00000
-#endif
-
-#if defined(CONFIG_DEBUG_MSM_UART1)
-#define MSM_DEBUG_UART_BASE 0xE1000000
-#define MSM_DEBUG_UART_PHYS MSM_UART1_PHYS
-#elif defined(CONFIG_DEBUG_MSM_UART2)
-#define MSM_DEBUG_UART_BASE 0xE1000000
-#define MSM_DEBUG_UART_PHYS MSM_UART2_PHYS
-#elif defined(CONFIG_DEBUG_MSM_UART3)
-#define MSM_DEBUG_UART_BASE 0xE1000000
-#define MSM_DEBUG_UART_PHYS MSM_UART3_PHYS
-#endif
-
-#ifdef CONFIG_DEBUG_MSM8660_UART
-#define MSM_DEBUG_UART_BASE 0xF0040000
-#define MSM_DEBUG_UART_PHYS 0x19C40000
-#endif
-
-#ifdef CONFIG_DEBUG_MSM8960_UART
-#define MSM_DEBUG_UART_BASE 0xF0040000
-#define MSM_DEBUG_UART_PHYS 0x16440000
-#endif
-
-#ifdef CONFIG_DEBUG_MSM8974_UART
-#define MSM_DEBUG_UART_BASE 0xFA71E000
-#define MSM_DEBUG_UART_PHYS 0xF991E000
-#endif
-
.macro addruart, rp, rv, tmp
-#ifdef MSM_DEBUG_UART_PHYS
- ldr \rp, =MSM_DEBUG_UART_PHYS
- ldr \rv, =MSM_DEBUG_UART_BASE
+#ifdef CONFIG_DEBUG_UART_PHYS
+ ldr \rp, =CONFIG_DEBUG_UART_PHYS
+ ldr \rv, =CONFIG_DEBUG_UART_VIRT
#endif
.endm
.macro senduart, rd, rx
-#ifdef CONFIG_MSM_HAS_DEBUG_UART_HS
+#ifdef CONFIG_DEBUG_QCOM_UARTDM
@ Write the 1 character to UARTDM_TF
str \rd, [\rx, #0x70]
#else
@@ -68,7 +32,7 @@
.endm
.macro waituart, rd, rx
-#ifdef CONFIG_MSM_HAS_DEBUG_UART_HS
+#ifdef CONFIG_DEBUG_QCOM_UARTDM
@ check for TX_EMT in UARTDM_SR
ldr \rd, [\rx, #0x08]
tst \rd, #0x08
diff --git a/arch/arm/include/debug/vf.S b/arch/arm/include/debug/vf.S
index ba12cc44b2cb..b88933849a17 100644
--- a/arch/arm/include/debug/vf.S
+++ b/arch/arm/include/debug/vf.S
@@ -7,9 +7,20 @@
*
*/
+#define VF_UART0_BASE_ADDR 0x40027000
+#define VF_UART1_BASE_ADDR 0x40028000
+#define VF_UART2_BASE_ADDR 0x40029000
+#define VF_UART3_BASE_ADDR 0x4002a000
+#define VF_UART_BASE_ADDR(n) VF_UART##n##_BASE_ADDR
+#define VF_UART_BASE(n) VF_UART_BASE_ADDR(n)
+#define VF_UART_PHYSICAL_BASE VF_UART_BASE(CONFIG_DEBUG_VF_UART_PORT)
+
+#define VF_UART_VIRTUAL_BASE 0xfe000000
+
.macro addruart, rp, rv, tmp
- ldr \rp, =0x40028000 @ physical
- ldr \rv, =0xfe028000 @ virtual
+ ldr \rp, =VF_UART_PHYSICAL_BASE @ physical
+ and \rv, \rp, #0xffffff @ offset within 16MB section
+ add \rv, \rv, #VF_UART_VIRTUAL_BASE
.endm
.macro senduart, rd, rx
diff --git a/arch/arm/include/debug/zynq.S b/arch/arm/include/debug/zynq.S
index 0b762fafa758..bd13dedbdeff 100644
--- a/arch/arm/include/debug/zynq.S
+++ b/arch/arm/include/debug/zynq.S
@@ -20,18 +20,18 @@
#define UART_SR_TXEMPTY 0x00000008 /* TX FIFO empty */
#define UART0_PHYS 0xE0000000
+#define UART0_VIRT 0xF0000000
#define UART1_PHYS 0xE0001000
-#define UART_SIZE SZ_4K
-#define UART_VIRT 0xF0001000
+#define UART1_VIRT 0xF0001000
#if IS_ENABLED(CONFIG_DEBUG_ZYNQ_UART1)
# define LL_UART_PADDR UART1_PHYS
+# define LL_UART_VADDR UART1_VIRT
#else
# define LL_UART_PADDR UART0_PHYS
+# define LL_UART_VADDR UART0_VIRT
#endif
-#define LL_UART_VADDR UART_VIRT
-
.macro addruart, rp, rv, tmp
ldr \rp, =LL_UART_PADDR @ physical
ldr \rv, =LL_UART_VADDR @ virtual
@@ -43,12 +43,14 @@
.macro waituart,rd,rx
1001: ldr \rd, [\rx, #UART_SR_OFFSET]
+ARM_BE8( rev \rd, \rd )
tst \rd, #UART_SR_TXEMPTY
beq 1001b
.endm
.macro busyuart,rd,rx
1002: ldr \rd, [\rx, #UART_SR_OFFSET] @ get status register
+ARM_BE8( rev \rd, \rd )
tst \rd, #UART_SR_TXFULL @
bne 1002b @ wait if FIFO is full
.endm
diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c
index f3f19f21352a..4860918b411e 100644
--- a/arch/arm/mach-at91/at91rm9200_devices.c
+++ b/arch/arm/mach-at91/at91rm9200_devices.c
@@ -25,6 +25,7 @@
#include "board.h"
#include "generic.h"
+#include "gpio.h"
/* --------------------------------------------------------------------
diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index 7cd6f19945ed..adcfb88a5d7d 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -24,12 +24,11 @@
#include <mach/at91sam9260_matrix.h>
#include <mach/at91_matrix.h>
#include <mach/at91sam9_smc.h>
-#include <mach/at91_adc.h>
#include <mach/hardware.h>
#include "board.h"
#include "generic.h"
-
+#include "gpio.h"
/* --------------------------------------------------------------------
* USB Host
@@ -1325,13 +1324,6 @@ static struct at91_adc_trigger at91_adc_triggers[] = {
},
};
-static struct at91_adc_reg_desc at91_adc_register_g20 = {
- .channel_base = AT91_ADC_CHR(0),
- .drdy_mask = AT91_ADC_DRDY,
- .status_register = AT91_ADC_SR,
- .trigger_register = AT91_ADC_MR,
-};
-
void __init at91_add_device_adc(struct at91_adc_data *data)
{
if (!data)
@@ -1349,9 +1341,7 @@ void __init at91_add_device_adc(struct at91_adc_data *data)
if (data->use_external_triggers)
at91_set_A_periph(AT91_PIN_PA22, 0);
- data->num_channels = 4;
data->startup_time = 10;
- data->registers = &at91_adc_register_g20;
data->trigger_number = 4;
data->trigger_list = at91_adc_triggers;
diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
index 80e35895d28f..43b21f456f6e 100644
--- a/arch/arm/mach-at91/at91sam9261_devices.c
+++ b/arch/arm/mach-at91/at91sam9261_devices.c
@@ -29,7 +29,7 @@
#include "board.h"
#include "generic.h"
-
+#include "gpio.h"
/* --------------------------------------------------------------------
* USB Host
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index 43d53d6156dd..953616e5dbcb 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -28,6 +28,7 @@
#include "board.h"
#include "generic.h"
+#include "gpio.h"
/* --------------------------------------------------------------------
diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c
index 5e6f498db0a8..9d3d544ac19c 100644
--- a/arch/arm/mach-at91/at91sam9g45.c
+++ b/arch/arm/mach-at91/at91sam9g45.c
@@ -182,7 +182,7 @@ static struct clk vdec_clk = {
static struct clk adc_op_clk = {
.name = "adc_op_clk",
.type = CLK_TYPE_PERIPHERAL,
- .rate_hz = 13200000,
+ .rate_hz = 300000,
};
/* AES/TDES/SHA clock - Only for sam9m11/sam9g56 */
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index dab362c06487..d943363c1845 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -25,7 +25,6 @@
#include <linux/fb.h>
#include <video/atmel_lcdc.h>
-#include <mach/at91_adc.h>
#include <mach/at91sam9g45.h>
#include <mach/at91sam9g45_matrix.h>
#include <mach/at91_matrix.h>
@@ -39,6 +38,7 @@
#include "board.h"
#include "generic.h"
#include "clock.h"
+#include "gpio.h"
/* --------------------------------------------------------------------
@@ -1133,58 +1133,7 @@ static void __init at91_add_device_rtc(void) {}
/* --------------------------------------------------------------------
- * Touchscreen
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_TOUCHSCREEN_ATMEL_TSADCC) || defined(CONFIG_TOUCHSCREEN_ATMEL_TSADCC_MODULE)
-static u64 tsadcc_dmamask = DMA_BIT_MASK(32);
-static struct at91_tsadcc_data tsadcc_data;
-
-static struct resource tsadcc_resources[] = {
- [0] = {
- .start = AT91SAM9G45_BASE_TSC,
- .end = AT91SAM9G45_BASE_TSC + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_TSC,
- .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_TSC,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static struct platform_device at91sam9g45_tsadcc_device = {
- .name = "atmel_tsadcc",
- .id = -1,
- .dev = {
- .dma_mask = &tsadcc_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &tsadcc_data,
- },
- .resource = tsadcc_resources,
- .num_resources = ARRAY_SIZE(tsadcc_resources),
-};
-
-void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data)
-{
- if (!data)
- return;
-
- at91_set_gpio_input(AT91_PIN_PD20, 0); /* AD0_XR */
- at91_set_gpio_input(AT91_PIN_PD21, 0); /* AD1_XL */
- at91_set_gpio_input(AT91_PIN_PD22, 0); /* AD2_YT */
- at91_set_gpio_input(AT91_PIN_PD23, 0); /* AD3_TB */
-
- tsadcc_data = *data;
- platform_device_register(&at91sam9g45_tsadcc_device);
-}
-#else
-void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * ADC
+ * ADC and touchscreen
* -------------------------------------------------------------------- */
#if IS_ENABLED(CONFIG_AT91_ADC)
@@ -1236,13 +1185,6 @@ static struct at91_adc_trigger at91_adc_triggers[] = {
},
};
-static struct at91_adc_reg_desc at91_adc_register_g45 = {
- .channel_base = AT91_ADC_CHR(0),
- .drdy_mask = AT91_ADC_DRDY,
- .status_register = AT91_ADC_SR,
- .trigger_register = 0x08,
-};
-
void __init at91_add_device_adc(struct at91_adc_data *data)
{
if (!data)
@@ -1268,9 +1210,7 @@ void __init at91_add_device_adc(struct at91_adc_data *data)
if (data->use_external_triggers)
at91_set_A_periph(AT91_PIN_PD28, 0);
- data->num_channels = 8;
data->startup_time = 40;
- data->registers = &at91_adc_register_g45;
data->trigger_number = 4;
data->trigger_list = at91_adc_triggers;
diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c
index 57f12d86c0e6..a79960f57e6a 100644
--- a/arch/arm/mach-at91/at91sam9rl.c
+++ b/arch/arm/mach-at91/at91sam9rl.c
@@ -153,6 +153,11 @@ static struct clk ac97_clk = {
.pmc_mask = 1 << AT91SAM9RL_ID_AC97C,
.type = CLK_TYPE_PERIPHERAL,
};
+static struct clk adc_op_clk = {
+ .name = "adc_op_clk",
+ .type = CLK_TYPE_PERIPHERAL,
+ .rate_hz = 1000000,
+};
static struct clk *periph_clocks[] __initdata = {
&pioA_clk,
@@ -178,6 +183,7 @@ static struct clk *periph_clocks[] __initdata = {
&udphs_clk,
&lcdc_clk,
&ac97_clk,
+ &adc_op_clk,
// irq0
};
@@ -216,6 +222,7 @@ static struct clk_lookup periph_clocks_lookups[] = {
CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioB_clk),
CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioC_clk),
CLKDEV_CON_DEV_ID(NULL, "fffffa00.gpio", &pioD_clk),
+ CLKDEV_CON_ID("adc_clk", &tsc_clk),
};
static struct clk_lookup usart_clocks_lookups[] = {
diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c
index 428fc412aaf1..044ad8bc6963 100644
--- a/arch/arm/mach-at91/at91sam9rl_devices.c
+++ b/arch/arm/mach-at91/at91sam9rl_devices.c
@@ -23,9 +23,11 @@
#include <mach/at91sam9_smc.h>
#include <mach/hardware.h>
#include <linux/platform_data/dma-atmel.h>
+#include <linux/platform_data/at91_adc.h>
#include "board.h"
#include "generic.h"
+#include "gpio.h"
/* --------------------------------------------------------------------
@@ -608,14 +610,13 @@ static void __init at91_add_device_tc(void) { }
/* --------------------------------------------------------------------
- * Touchscreen
+ * ADC and Touchscreen
* -------------------------------------------------------------------- */
-#if defined(CONFIG_TOUCHSCREEN_ATMEL_TSADCC) || defined(CONFIG_TOUCHSCREEN_ATMEL_TSADCC_MODULE)
-static u64 tsadcc_dmamask = DMA_BIT_MASK(32);
-static struct at91_tsadcc_data tsadcc_data;
+#if IS_ENABLED(CONFIG_AT91_ADC)
+static struct at91_adc_data adc_data;
-static struct resource tsadcc_resources[] = {
+static struct resource adc_resources[] = {
[0] = {
.start = AT91SAM9RL_BASE_TSC,
.end = AT91SAM9RL_BASE_TSC + SZ_16K - 1,
@@ -628,36 +629,71 @@ static struct resource tsadcc_resources[] = {
}
};
-static struct platform_device at91sam9rl_tsadcc_device = {
- .name = "atmel_tsadcc",
- .id = -1,
- .dev = {
- .dma_mask = &tsadcc_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &tsadcc_data,
+static struct platform_device at91_adc_device = {
+ .name = "at91sam9rl-adc",
+ .id = -1,
+ .dev = {
+ .platform_data = &adc_data,
},
- .resource = tsadcc_resources,
- .num_resources = ARRAY_SIZE(tsadcc_resources),
+ .resource = adc_resources,
+ .num_resources = ARRAY_SIZE(adc_resources),
};
-void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data)
+static struct at91_adc_trigger at91_adc_triggers[] = {
+ [0] = {
+ .name = "external-rising",
+ .value = 1,
+ .is_external = true,
+ },
+ [1] = {
+ .name = "external-falling",
+ .value = 2,
+ .is_external = true,
+ },
+ [2] = {
+ .name = "external-any",
+ .value = 3,
+ .is_external = true,
+ },
+ [3] = {
+ .name = "continuous",
+ .value = 6,
+ .is_external = false,
+ },
+};
+
+void __init at91_add_device_adc(struct at91_adc_data *data)
{
if (!data)
return;
- at91_set_A_periph(AT91_PIN_PA17, 0); /* AD0_XR */
- at91_set_A_periph(AT91_PIN_PA18, 0); /* AD1_XL */
- at91_set_A_periph(AT91_PIN_PA19, 0); /* AD2_YT */
- at91_set_A_periph(AT91_PIN_PA20, 0); /* AD3_TB */
-
- tsadcc_data = *data;
- platform_device_register(&at91sam9rl_tsadcc_device);
+ if (test_bit(0, &data->channels_used))
+ at91_set_A_periph(AT91_PIN_PA17, 0);
+ if (test_bit(1, &data->channels_used))
+ at91_set_A_periph(AT91_PIN_PA18, 0);
+ if (test_bit(2, &data->channels_used))
+ at91_set_A_periph(AT91_PIN_PA19, 0);
+ if (test_bit(3, &data->channels_used))
+ at91_set_A_periph(AT91_PIN_PA20, 0);
+ if (test_bit(4, &data->channels_used))
+ at91_set_A_periph(AT91_PIN_PD6, 0);
+ if (test_bit(5, &data->channels_used))
+ at91_set_A_periph(AT91_PIN_PD7, 0);
+
+ if (data->use_external_triggers)
+ at91_set_A_periph(AT91_PIN_PB15, 0);
+
+ data->startup_time = 40;
+ data->trigger_number = 4;
+ data->trigger_list = at91_adc_triggers;
+
+ adc_data = *data;
+ platform_device_register(&at91_adc_device);
}
#else
-void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data) {}
+void __init at91_add_device_adc(struct at91_adc_data *data) {}
#endif
-
/* --------------------------------------------------------------------
* RTC
* -------------------------------------------------------------------- */
diff --git a/arch/arm/mach-at91/board-1arm.c b/arch/arm/mach-at91/board-1arm.c
index 35ab632bbf68..3f6dbcc34022 100644
--- a/arch/arm/mach-at91/board-1arm.c
+++ b/arch/arm/mach-at91/board-1arm.c
@@ -39,7 +39,7 @@
#include "at91_aic.h"
#include "board.h"
#include "generic.h"
-
+#include "gpio.h"
static void __init onearm_init_early(void)
{
diff --git a/arch/arm/mach-at91/board-afeb-9260v1.c b/arch/arm/mach-at91/board-afeb-9260v1.c
index f95e31cda4b3..597c649170aa 100644
--- a/arch/arm/mach-at91/board-afeb-9260v1.c
+++ b/arch/arm/mach-at91/board-afeb-9260v1.c
@@ -46,6 +46,7 @@
#include "at91_aic.h"
#include "board.h"
#include "generic.h"
+#include "gpio.h"
static void __init afeb9260_init_early(void)
diff --git a/arch/arm/mach-at91/board-cam60.c b/arch/arm/mach-at91/board-cam60.c
index 112e867c4abe..a30502c8d379 100644
--- a/arch/arm/mach-at91/board-cam60.c
+++ b/arch/arm/mach-at91/board-cam60.c
@@ -44,6 +44,7 @@
#include "board.h"
#include "sam9_smc.h"
#include "generic.h"
+#include "gpio.h"
static void __init cam60_init_early(void)
diff --git a/arch/arm/mach-at91/board-carmeva.c b/arch/arm/mach-at91/board-carmeva.c
index 92983050a9bd..47313d3ee037 100644
--- a/arch/arm/mach-at91/board-carmeva.c
+++ b/arch/arm/mach-at91/board-carmeva.c
@@ -39,6 +39,7 @@
#include "at91_aic.h"
#include "board.h"
#include "generic.h"
+#include "gpio.h"
static void __init carmeva_init_early(void)
diff --git a/arch/arm/mach-at91/board-cpu9krea.c b/arch/arm/mach-at91/board-cpu9krea.c
index 008527efdbcf..2037f78c84e7 100644
--- a/arch/arm/mach-at91/board-cpu9krea.c
+++ b/arch/arm/mach-at91/board-cpu9krea.c
@@ -48,6 +48,7 @@
#include "board.h"
#include "sam9_smc.h"
#include "generic.h"
+#include "gpio.h"
static void __init cpu9krea_init_early(void)
{
diff --git a/arch/arm/mach-at91/board-cpuat91.c b/arch/arm/mach-at91/board-cpuat91.c
index 42f1353a4baf..c094350c9314 100644
--- a/arch/arm/mach-at91/board-cpuat91.c
+++ b/arch/arm/mach-at91/board-cpuat91.c
@@ -43,6 +43,8 @@
#include "at91_aic.h"
#include "board.h"
#include "generic.h"
+#include "gpio.h"
+
static struct gpio_led cpuat91_leds[] = {
{
diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c
index e5fde215225b..0e35a45cf8d4 100644
--- a/arch/arm/mach-at91/board-csb337.c
+++ b/arch/arm/mach-at91/board-csb337.c
@@ -42,7 +42,7 @@
#include "at91_aic.h"
#include "board.h"
#include "generic.h"
-
+#include "gpio.h"
static void __init csb337_init_early(void)
{
diff --git a/arch/arm/mach-at91/board-csb637.c b/arch/arm/mach-at91/board-csb637.c
index fdf11061c577..18d027f529a8 100644
--- a/arch/arm/mach-at91/board-csb637.c
+++ b/arch/arm/mach-at91/board-csb637.c
@@ -39,6 +39,7 @@
#include "at91_aic.h"
#include "board.h"
#include "generic.h"
+#include "gpio.h"
static void __init csb637_init_early(void)
diff --git a/arch/arm/mach-at91/board-eb9200.c b/arch/arm/mach-at91/board-eb9200.c
index f9be8161bbfa..aa457a8b22f5 100644
--- a/arch/arm/mach-at91/board-eb9200.c
+++ b/arch/arm/mach-at91/board-eb9200.c
@@ -38,6 +38,7 @@
#include "at91_aic.h"
#include "board.h"
#include "generic.h"
+#include "gpio.h"
static void __init eb9200_init_early(void)
diff --git a/arch/arm/mach-at91/board-ecbat91.c b/arch/arm/mach-at91/board-ecbat91.c
index b2fcd71262ba..ede1373ccaba 100644
--- a/arch/arm/mach-at91/board-ecbat91.c
+++ b/arch/arm/mach-at91/board-ecbat91.c
@@ -42,6 +42,7 @@
#include "at91_aic.h"
#include "board.h"
#include "generic.h"
+#include "gpio.h"
static void __init ecb_at91init_early(void)
diff --git a/arch/arm/mach-at91/board-eco920.c b/arch/arm/mach-at91/board-eco920.c
index 77de410efc90..4e75321a8f2a 100644
--- a/arch/arm/mach-at91/board-eco920.c
+++ b/arch/arm/mach-at91/board-eco920.c
@@ -31,6 +31,8 @@
#include "at91_aic.h"
#include "board.h"
#include "generic.h"
+#include "gpio.h"
+
static void __init eco920_init_early(void)
{
diff --git a/arch/arm/mach-at91/board-flexibity.c b/arch/arm/mach-at91/board-flexibity.c
index 737c08563628..68f1ab6bd08f 100644
--- a/arch/arm/mach-at91/board-flexibity.c
+++ b/arch/arm/mach-at91/board-flexibity.c
@@ -37,6 +37,7 @@
#include "at91_aic.h"
#include "board.h"
#include "generic.h"
+#include "gpio.h"
static void __init flexibity_init_early(void)
{
diff --git a/arch/arm/mach-at91/board-foxg20.c b/arch/arm/mach-at91/board-foxg20.c
index c20a870ea9c9..8b22c60bb238 100644
--- a/arch/arm/mach-at91/board-foxg20.c
+++ b/arch/arm/mach-at91/board-foxg20.c
@@ -47,6 +47,7 @@
#include "board.h"
#include "sam9_smc.h"
#include "generic.h"
+#include "gpio.h"
/*
* The FOX Board G20 hardware comes as the "Netus G20" board with
diff --git a/arch/arm/mach-at91/board-gsia18s.c b/arch/arm/mach-at91/board-gsia18s.c
index 416bae8435ee..b729dd1271bf 100644
--- a/arch/arm/mach-at91/board-gsia18s.c
+++ b/arch/arm/mach-at91/board-gsia18s.c
@@ -39,6 +39,7 @@
#include "generic.h"
#include "gsia18s.h"
#include "stamp9g20.h"
+#include "gpio.h"
static void __init gsia18s_init_early(void)
{
diff --git a/arch/arm/mach-at91/board-kafa.c b/arch/arm/mach-at91/board-kafa.c
index 88e2f5d2d16d..93b1df42f639 100644
--- a/arch/arm/mach-at91/board-kafa.c
+++ b/arch/arm/mach-at91/board-kafa.c
@@ -39,6 +39,7 @@
#include "at91_aic.h"
#include "board.h"
#include "generic.h"
+#include "gpio.h"
static void __init kafa_init_early(void)
diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c
index 0c519d9ebffc..d58d36225e08 100644
--- a/arch/arm/mach-at91/board-kb9202.c
+++ b/arch/arm/mach-at91/board-kb9202.c
@@ -42,6 +42,7 @@
#include "at91_aic.h"
#include "board.h"
#include "generic.h"
+#include "gpio.h"
static void __init kb9202_init_early(void)
diff --git a/arch/arm/mach-at91/board-pcontrol-g20.c b/arch/arm/mach-at91/board-pcontrol-g20.c
index 5f25fa54eb93..b48d95ec5152 100644
--- a/arch/arm/mach-at91/board-pcontrol-g20.c
+++ b/arch/arm/mach-at91/board-pcontrol-g20.c
@@ -37,6 +37,7 @@
#include "sam9_smc.h"
#include "generic.h"
#include "stamp9g20.h"
+#include "gpio.h"
static void __init pcontrol_g20_init_early(void)
diff --git a/arch/arm/mach-at91/board-picotux200.c b/arch/arm/mach-at91/board-picotux200.c
index ab2b2ec36c14..2c0f2d554d84 100644
--- a/arch/arm/mach-at91/board-picotux200.c
+++ b/arch/arm/mach-at91/board-picotux200.c
@@ -43,6 +43,7 @@
#include "at91_aic.h"
#include "board.h"
#include "generic.h"
+#include "gpio.h"
static void __init picotux200_init_early(void)
diff --git a/arch/arm/mach-at91/board-rm9200ek.c b/arch/arm/mach-at91/board-rm9200ek.c
index 8b17dadc1aba..953cea416754 100644
--- a/arch/arm/mach-at91/board-rm9200ek.c
+++ b/arch/arm/mach-at91/board-rm9200ek.c
@@ -45,6 +45,7 @@
#include "at91_aic.h"
#include "board.h"
#include "generic.h"
+#include "gpio.h"
static void __init ek_init_early(void)
diff --git a/arch/arm/mach-at91/board-rsi-ews.c b/arch/arm/mach-at91/board-rsi-ews.c
index f6d7f1958c7e..f28e8b74df4b 100644
--- a/arch/arm/mach-at91/board-rsi-ews.c
+++ b/arch/arm/mach-at91/board-rsi-ews.c
@@ -31,6 +31,7 @@
#include "at91_aic.h"
#include "board.h"
#include "generic.h"
+#include "gpio.h"
static void __init rsi_ews_init_early(void)
{
diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c
index 43ee4dc43b50..d24dda67e2d3 100644
--- a/arch/arm/mach-at91/board-sam9-l9260.c
+++ b/arch/arm/mach-at91/board-sam9-l9260.c
@@ -43,6 +43,7 @@
#include "board.h"
#include "sam9_smc.h"
#include "generic.h"
+#include "gpio.h"
static void __init ek_init_early(void)
diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c
index f4f8735315da..65dea12d685e 100644
--- a/arch/arm/mach-at91/board-sam9260ek.c
+++ b/arch/arm/mach-at91/board-sam9260ek.c
@@ -49,6 +49,7 @@
#include "board.h"
#include "sam9_smc.h"
#include "generic.h"
+#include "gpio.h"
static void __init ek_init_early(void)
diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
index 473546b9408b..4637432de08f 100644
--- a/arch/arm/mach-at91/board-sam9261ek.c
+++ b/arch/arm/mach-at91/board-sam9261ek.c
@@ -53,6 +53,7 @@
#include "board.h"
#include "sam9_smc.h"
#include "generic.h"
+#include "gpio.h"
static void __init ek_init_early(void)
diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
index 2f931915c80c..cd2726ee5add 100644
--- a/arch/arm/mach-at91/board-sam9263ek.c
+++ b/arch/arm/mach-at91/board-sam9263ek.c
@@ -52,6 +52,7 @@
#include "board.h"
#include "sam9_smc.h"
#include "generic.h"
+#include "gpio.h"
static void __init ek_init_early(void)
diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c
index f9cd1f2c7146..e1be6e25b380 100644
--- a/arch/arm/mach-at91/board-sam9g20ek.c
+++ b/arch/arm/mach-at91/board-sam9g20ek.c
@@ -50,6 +50,7 @@
#include "board.h"
#include "sam9_smc.h"
#include "generic.h"
+#include "gpio.h"
/*
* board revision encoding
diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c
index ef39078c8ce2..1ea61328f30d 100644
--- a/arch/arm/mach-at91/board-sam9m10g45ek.c
+++ b/arch/arm/mach-at91/board-sam9m10g45ek.c
@@ -50,6 +50,7 @@
#include "board.h"
#include "sam9_smc.h"
#include "generic.h"
+#include "gpio.h"
static void __init ek_init_early(void)
@@ -300,21 +301,13 @@ static struct atmel_lcdfb_pdata __initdata ek_lcdc_data;
/*
- * Touchscreen
- */
-static struct at91_tsadcc_data ek_tsadcc_data = {
- .adc_clock = 300000,
- .pendet_debounce = 0x0d,
- .ts_sample_hold_time = 0x0a,
-};
-
-/*
- * ADCs
+ * ADCs and touchscreen
*/
static struct at91_adc_data ek_adc_data = {
.channels_used = BIT(0) | BIT(1) | BIT(2) | BIT(3) | BIT(4) | BIT(5) | BIT(6) | BIT(7),
.use_external_triggers = true,
.vref = 3300,
+ .touchscreen_type = ATMEL_ADC_TOUCHSCREEN_4WIRE,
};
/*
@@ -485,9 +478,7 @@ static void __init ek_board_init(void)
at91_add_device_isi(&isi_data, true);
/* LCD Controller */
at91_add_device_lcdc(&ek_lcdc_data);
- /* Touch Screen */
- at91_add_device_tsadcc(&ek_tsadcc_data);
- /* ADC */
+ /* ADC and touchscreen */
at91_add_device_adc(&ek_adc_data);
/* Push Buttons */
ek_add_device_buttons();
diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c
index 604eecf6cd70..b64648b4a1fc 100644
--- a/arch/arm/mach-at91/board-sam9rlek.c
+++ b/arch/arm/mach-at91/board-sam9rlek.c
@@ -18,6 +18,7 @@
#include <linux/clk.h>
#include <linux/input.h>
#include <linux/gpio_keys.h>
+#include <linux/platform_data/at91_adc.h>
#include <video/atmel_lcdc.h>
@@ -38,6 +39,7 @@
#include "board.h"
#include "sam9_smc.h"
#include "generic.h"
+#include "gpio.h"
static void __init ek_init_early(void)
@@ -229,12 +231,13 @@ static struct gpio_led ek_leds[] = {
/*
- * Touchscreen
+ * ADC + Touchscreen
*/
-static struct at91_tsadcc_data ek_tsadcc_data = {
- .adc_clock = 1000000,
- .pendet_debounce = 0x0f,
- .ts_sample_hold_time = 0x03,
+static struct at91_adc_data ek_adc_data = {
+ .channels_used = BIT(0) | BIT(1) | BIT(2) | BIT(3) | BIT(4) | BIT(5),
+ .use_external_triggers = true,
+ .vref = 3300,
+ .touchscreen_type = ATMEL_ADC_TOUCHSCREEN_4WIRE,
};
@@ -310,8 +313,8 @@ static void __init ek_board_init(void)
at91_add_device_lcdc(&ek_lcdc_data);
/* AC97 */
at91_add_device_ac97(&ek_ac97_data);
- /* Touch Screen Controller */
- at91_add_device_tsadcc(&ek_tsadcc_data);
+ /* Touch Screen Controller + ADC */
+ at91_add_device_adc(&ek_adc_data);
/* LEDs */
at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
/* Push Buttons */
diff --git a/arch/arm/mach-at91/board-snapper9260.c b/arch/arm/mach-at91/board-snapper9260.c
index f1d49e929ccb..1b870e6def0c 100644
--- a/arch/arm/mach-at91/board-snapper9260.c
+++ b/arch/arm/mach-at91/board-snapper9260.c
@@ -38,6 +38,7 @@
#include "board.h"
#include "sam9_smc.h"
#include "generic.h"
+#include "gpio.h"
#define SNAPPER9260_IO_EXP_GPIO(x) (NR_BUILTIN_GPIO + (x))
diff --git a/arch/arm/mach-at91/board-stamp9g20.c b/arch/arm/mach-at91/board-stamp9g20.c
index e4a5ac17cdbc..3b575036ff96 100644
--- a/arch/arm/mach-at91/board-stamp9g20.c
+++ b/arch/arm/mach-at91/board-stamp9g20.c
@@ -32,6 +32,7 @@
#include "board.h"
#include "sam9_smc.h"
#include "generic.h"
+#include "gpio.h"
void __init stamp9g20_init_early(void)
diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c
index be083771df2e..46fdb0c68a68 100644
--- a/arch/arm/mach-at91/board-yl-9200.c
+++ b/arch/arm/mach-at91/board-yl-9200.c
@@ -50,6 +50,7 @@
#include "at91_aic.h"
#include "board.h"
#include "generic.h"
+#include "gpio.h"
static void __init yl9200_init_early(void)
diff --git a/arch/arm/mach-at91/board.h b/arch/arm/mach-at91/board.h
index 6c08b341167d..4e773b55bc2d 100644
--- a/arch/arm/mach-at91/board.h
+++ b/arch/arm/mach-at91/board.h
@@ -118,9 +118,6 @@ struct isi_platform_data;
extern void __init at91_add_device_isi(struct isi_platform_data *data,
bool use_pck_as_mck);
- /* Touchscreen Controller */
-extern void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data);
-
/* CAN */
extern void __init at91_add_device_can(struct at91_can_data *data);
diff --git a/arch/arm/mach-at91/gpio.c b/arch/arm/mach-at91/gpio.c
index a5afcf76550e..12ed05bbdc5c 100644
--- a/arch/arm/mach-at91/gpio.c
+++ b/arch/arm/mach-at91/gpio.c
@@ -29,6 +29,7 @@
#include <mach/at91_pio.h>
#include "generic.h"
+#include "gpio.h"
#define MAX_NB_GPIO_PER_BANK 32
diff --git a/arch/arm/mach-at91/include/mach/gpio.h b/arch/arm/mach-at91/gpio.h
index 5fc23771c154..eed465ab0dd7 100644
--- a/arch/arm/mach-at91/include/mach/gpio.h
+++ b/arch/arm/mach-at91/gpio.h
@@ -209,14 +209,6 @@ extern int at91_get_gpio_value(unsigned pin);
extern void at91_gpio_suspend(void);
extern void at91_gpio_resume(void);
-#ifdef CONFIG_PINCTRL_AT91
-extern void at91_pinctrl_gpio_suspend(void);
-extern void at91_pinctrl_gpio_resume(void);
-#else
-static inline void at91_pinctrl_gpio_suspend(void) {}
-static inline void at91_pinctrl_gpio_resume(void) {}
-#endif
-
#endif /* __ASSEMBLY__ */
#endif
diff --git a/arch/arm/mach-at91/include/mach/at91_adc.h b/arch/arm/mach-at91/include/mach/at91_adc.h
deleted file mode 100644
index c287307b9a3b..000000000000
--- a/arch/arm/mach-at91/include/mach/at91_adc.h
+++ /dev/null
@@ -1,107 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/at91_adc.h
- *
- * Copyright (C) SAN People
- *
- * Analog-to-Digital Converter (ADC) registers.
- * Based on AT91SAM9260 datasheet revision D.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_ADC_H
-#define AT91_ADC_H
-
-#define AT91_ADC_CR 0x00 /* Control Register */
-#define AT91_ADC_SWRST (1 << 0) /* Software Reset */
-#define AT91_ADC_START (1 << 1) /* Start Conversion */
-
-#define AT91_ADC_MR 0x04 /* Mode Register */
-#define AT91_ADC_TRGEN (1 << 0) /* Trigger Enable */
-#define AT91_ADC_TRGSEL (7 << 1) /* Trigger Selection */
-#define AT91_ADC_TRGSEL_TC0 (0 << 1)
-#define AT91_ADC_TRGSEL_TC1 (1 << 1)
-#define AT91_ADC_TRGSEL_TC2 (2 << 1)
-#define AT91_ADC_TRGSEL_EXTERNAL (6 << 1)
-#define AT91_ADC_LOWRES (1 << 4) /* Low Resolution */
-#define AT91_ADC_SLEEP (1 << 5) /* Sleep Mode */
-#define AT91_ADC_PRESCAL_9260 (0x3f << 8) /* Prescalar Rate Selection */
-#define AT91_ADC_PRESCAL_9G45 (0xff << 8)
-#define AT91_ADC_PRESCAL_(x) ((x) << 8)
-#define AT91_ADC_STARTUP_9260 (0x1f << 16) /* Startup Up Time */
-#define AT91_ADC_STARTUP_9G45 (0x7f << 16)
-#define AT91_ADC_STARTUP_9X5 (0xf << 16)
-#define AT91_ADC_STARTUP_(x) ((x) << 16)
-#define AT91_ADC_SHTIM (0xf << 24) /* Sample & Hold Time */
-#define AT91_ADC_SHTIM_(x) ((x) << 24)
-
-#define AT91_ADC_CHER 0x10 /* Channel Enable Register */
-#define AT91_ADC_CHDR 0x14 /* Channel Disable Register */
-#define AT91_ADC_CHSR 0x18 /* Channel Status Register */
-#define AT91_ADC_CH(n) (1 << (n)) /* Channel Number */
-
-#define AT91_ADC_SR 0x1C /* Status Register */
-#define AT91_ADC_EOC(n) (1 << (n)) /* End of Conversion on Channel N */
-#define AT91_ADC_OVRE(n) (1 << ((n) + 8))/* Overrun Error on Channel N */
-#define AT91_ADC_DRDY (1 << 16) /* Data Ready */
-#define AT91_ADC_GOVRE (1 << 17) /* General Overrun Error */
-#define AT91_ADC_ENDRX (1 << 18) /* End of RX Buffer */
-#define AT91_ADC_RXFUFF (1 << 19) /* RX Buffer Full */
-
-#define AT91_ADC_SR_9X5 0x30 /* Status Register for 9x5 */
-#define AT91_ADC_SR_DRDY_9X5 (1 << 24) /* Data Ready */
-
-#define AT91_ADC_LCDR 0x20 /* Last Converted Data Register */
-#define AT91_ADC_LDATA (0x3ff)
-
-#define AT91_ADC_IER 0x24 /* Interrupt Enable Register */
-#define AT91_ADC_IDR 0x28 /* Interrupt Disable Register */
-#define AT91_ADC_IMR 0x2C /* Interrupt Mask Register */
-#define AT91_ADC_IER_PEN (1 << 29)
-#define AT91_ADC_IER_NOPEN (1 << 30)
-#define AT91_ADC_IER_XRDY (1 << 20)
-#define AT91_ADC_IER_YRDY (1 << 21)
-#define AT91_ADC_IER_PRDY (1 << 22)
-#define AT91_ADC_ISR_PENS (1 << 31)
-
-#define AT91_ADC_CHR(n) (0x30 + ((n) * 4)) /* Channel Data Register N */
-#define AT91_ADC_DATA (0x3ff)
-
-#define AT91_ADC_CDR0_9X5 (0x50) /* Channel Data Register 0 for 9X5 */
-
-#define AT91_ADC_ACR 0x94 /* Analog Control Register */
-#define AT91_ADC_ACR_PENDETSENS (0x3 << 0) /* pull-up resistor */
-
-#define AT91_ADC_TSMR 0xB0
-#define AT91_ADC_TSMR_TSMODE (3 << 0) /* Touch Screen Mode */
-#define AT91_ADC_TSMR_TSMODE_NONE (0 << 0)
-#define AT91_ADC_TSMR_TSMODE_4WIRE_NO_PRESS (1 << 0)
-#define AT91_ADC_TSMR_TSMODE_4WIRE_PRESS (2 << 0)
-#define AT91_ADC_TSMR_TSMODE_5WIRE (3 << 0)
-#define AT91_ADC_TSMR_TSAV (3 << 4) /* Averages samples */
-#define AT91_ADC_TSMR_TSAV_(x) ((x) << 4)
-#define AT91_ADC_TSMR_SCTIM (0x0f << 16) /* Switch closure time */
-#define AT91_ADC_TSMR_PENDBC (0x0f << 28) /* Pen Debounce time */
-#define AT91_ADC_TSMR_PENDBC_(x) ((x) << 28)
-#define AT91_ADC_TSMR_NOTSDMA (1 << 22) /* No Touchscreen DMA */
-#define AT91_ADC_TSMR_PENDET_DIS (0 << 24) /* Pen contact detection disable */
-#define AT91_ADC_TSMR_PENDET_ENA (1 << 24) /* Pen contact detection enable */
-
-#define AT91_ADC_TSXPOSR 0xB4
-#define AT91_ADC_TSYPOSR 0xB8
-#define AT91_ADC_TSPRESSR 0xBC
-
-#define AT91_ADC_TRGR_9260 AT91_ADC_MR
-#define AT91_ADC_TRGR_9G45 0x08
-#define AT91_ADC_TRGR_9X5 0xC0
-
-/* Trigger Register bit field */
-#define AT91_ADC_TRGR_TRGPER (0xffff << 16)
-#define AT91_ADC_TRGR_TRGPER_(x) ((x) << 16)
-#define AT91_ADC_TRGR_TRGMOD (0x7 << 0)
-#define AT91_ADC_TRGR_MOD_PERIOD_TRIG (5 << 0)
-
-#endif
diff --git a/arch/arm/mach-at91/include/mach/hardware.h b/arch/arm/mach-at91/include/mach/hardware.h
index f17aa3150019..56338245653a 100644
--- a/arch/arm/mach-at91/include/mach/hardware.h
+++ b/arch/arm/mach-at91/include/mach/hardware.h
@@ -104,5 +104,20 @@
/* Clocks */
#define AT91_SLOW_CLOCK 32768 /* slow clock */
+/*
+ * FIXME: this is needed to communicate between the pinctrl driver and
+ * the PM implementation in the machine. Possibly part of the PM
+ * implementation should be moved down into the pinctrl driver and get
+ * called as part of the generic suspend/resume path.
+ */
+#ifndef __ASSEMBLY__
+#ifdef CONFIG_PINCTRL_AT91
+extern void at91_pinctrl_gpio_suspend(void);
+extern void at91_pinctrl_gpio_resume(void);
+#else
+static inline void at91_pinctrl_gpio_suspend(void) {}
+static inline void at91_pinctrl_gpio_resume(void) {}
+#endif
+#endif
#endif
diff --git a/arch/arm/mach-at91/leds.c b/arch/arm/mach-at91/leds.c
index 3e22978b5547..77c4d8fd03fd 100644
--- a/arch/arm/mach-at91/leds.c
+++ b/arch/arm/mach-at91/leds.c
@@ -16,6 +16,7 @@
#include <linux/platform_device.h>
#include "board.h"
+#include "gpio.h"
/* ------------------------------------------------------------------------- */
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 8bda1cefdf96..e95554532987 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -32,6 +32,7 @@
#include "at91_aic.h"
#include "generic.h"
#include "pm.h"
+#include "gpio.h"
/*
* Show the reason for the previous system reset.
diff --git a/arch/arm/mach-axxia/Kconfig b/arch/arm/mach-axxia/Kconfig
new file mode 100644
index 000000000000..8be7e0ae1922
--- /dev/null
+++ b/arch/arm/mach-axxia/Kconfig
@@ -0,0 +1,16 @@
+config ARCH_AXXIA
+ bool "LSI Axxia platforms" if (ARCH_MULTI_V7 && ARM_LPAE)
+ select ARCH_DMA_ADDR_T_64BIT
+ select ARM_AMBA
+ select ARM_GIC
+ select ARM_TIMER_SP804
+ select HAVE_ARM_ARCH_TIMER
+ select MFD_SYSCON
+ select MIGHT_HAVE_PCI
+ select PCI_DOMAINS if PCI
+ select ZONE_DMA
+ help
+ This enables support for the LSI Axxia devices.
+
+ The LSI Axxia platforms require a Flattened Device Tree to be passed
+ to the kernel.
diff --git a/arch/arm/mach-axxia/Makefile b/arch/arm/mach-axxia/Makefile
new file mode 100644
index 000000000000..ec4f68b460c6
--- /dev/null
+++ b/arch/arm/mach-axxia/Makefile
@@ -0,0 +1,2 @@
+obj-y += axxia.o
+obj-$(CONFIG_SMP) += platsmp.o
diff --git a/arch/arm/mach-axxia/axxia.c b/arch/arm/mach-axxia/axxia.c
new file mode 100644
index 000000000000..19e5a1d95397
--- /dev/null
+++ b/arch/arm/mach-axxia/axxia.c
@@ -0,0 +1,28 @@
+/*
+ * Support for the LSI Axxia SoC devices based on ARM cores.
+ *
+ * Copyright (C) 2012 LSI
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#include <linux/init.h>
+#include <asm/mach/arch.h>
+
+static const char *axxia_dt_match[] __initconst = {
+ "lsi,axm5516",
+ "lsi,axm5516-sim",
+ "lsi,axm5516-emu",
+ NULL
+};
+
+DT_MACHINE_START(AXXIA_DT, "LSI Axxia AXM55XX")
+ .dt_compat = axxia_dt_match,
+MACHINE_END
diff --git a/arch/arm/mach-axxia/platsmp.c b/arch/arm/mach-axxia/platsmp.c
new file mode 100644
index 000000000000..959d4df3d2b6
--- /dev/null
+++ b/arch/arm/mach-axxia/platsmp.c
@@ -0,0 +1,89 @@
+/*
+ * linux/arch/arm/mach-axxia/platsmp.c
+ *
+ * Copyright (C) 2012 LSI Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/smp.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <asm/cacheflush.h>
+
+/* Syscon register offsets for releasing cores from reset */
+#define SC_CRIT_WRITE_KEY 0x1000
+#define SC_RST_CPU_HOLD 0x1010
+
+/*
+ * Write the kernel entry point for secondary CPUs to the specified address
+ */
+static void write_release_addr(u32 release_phys)
+{
+ u32 *virt = (u32 *) phys_to_virt(release_phys);
+ writel_relaxed(virt_to_phys(secondary_startup), virt);
+ /* Make sure this store is visible to other CPUs */
+ smp_wmb();
+ __cpuc_flush_dcache_area(virt, sizeof(u32));
+}
+
+static int axxia_boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+ struct device_node *syscon_np;
+ void __iomem *syscon;
+ u32 tmp;
+
+ syscon_np = of_find_compatible_node(NULL, NULL, "lsi,axxia-syscon");
+ if (!syscon_np)
+ return -ENOENT;
+
+ syscon = of_iomap(syscon_np, 0);
+ if (!syscon)
+ return -ENOMEM;
+
+ tmp = readl(syscon + SC_RST_CPU_HOLD);
+ writel(0xab, syscon + SC_CRIT_WRITE_KEY);
+ tmp &= ~(1 << cpu);
+ writel(tmp, syscon + SC_RST_CPU_HOLD);
+
+ return 0;
+}
+
+static void __init axxia_smp_prepare_cpus(unsigned int max_cpus)
+{
+ int cpu_count = 0;
+ int cpu;
+
+ /*
+ * Initialise the present map, which describes the set of CPUs actually
+ * populated at the present time.
+ */
+ for_each_possible_cpu(cpu) {
+ struct device_node *np;
+ u32 release_phys;
+
+ np = of_get_cpu_node(cpu, NULL);
+ if (!np)
+ continue;
+ if (of_property_read_u32(np, "cpu-release-addr", &release_phys))
+ continue;
+
+ if (cpu_count < max_cpus) {
+ set_cpu_present(cpu, true);
+ cpu_count++;
+ }
+
+ if (release_phys != 0)
+ write_release_addr(release_phys);
+ }
+}
+
+static struct smp_operations axxia_smp_ops __initdata = {
+ .smp_prepare_cpus = axxia_smp_prepare_cpus,
+ .smp_boot_secondary = axxia_boot_secondary,
+};
+CPU_METHOD_OF_DECLARE(axxia_smp, "lsi,syscon-release", &axxia_smp_ops);
diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig
index 2113d92c668a..9bc6db1c1348 100644
--- a/arch/arm/mach-bcm/Kconfig
+++ b/arch/arm/mach-bcm/Kconfig
@@ -1,19 +1,17 @@
config ARCH_BCM
- bool "Broadcom SoC Support"
- depends on ARCH_MULTIPLATFORM
+ bool "Broadcom SoC Support" if ARCH_MULTI_V6_V7
help
- This enables support for Broadcom ARM based SoC
- chips
-
-if ARCH_BCM
+ This enables support for Broadcom ARM based SoC chips
menu "Broadcom SoC Selection"
+ depends on ARCH_BCM
config ARCH_BCM_MOBILE
bool "Broadcom Mobile SoC Support" if ARCH_MULTI_V7
select ARCH_REQUIRE_GPIOLIB
select ARM_ERRATA_754322
select ARM_ERRATA_764369 if SMP
+ select ARM_ERRATA_775420
select ARM_GIC
select GPIO_BCM_KONA
select TICK_ONESHOT
@@ -91,5 +89,3 @@ config ARCH_BCM_5301X
network SoC using a MIPS CPU, they are supported by arch/mips/bcm47xx
endmenu
-
-endif
diff --git a/arch/arm/mach-berlin/Kconfig b/arch/arm/mach-berlin/Kconfig
index b0cb0722acd2..101e0f356730 100644
--- a/arch/arm/mach-berlin/Kconfig
+++ b/arch/arm/mach-berlin/Kconfig
@@ -1,9 +1,11 @@
config ARCH_BERLIN
bool "Marvell Berlin SoCs" if ARCH_MULTI_V7
+ select ARCH_REQUIRE_GPIOLIB
select ARM_GIC
select GENERIC_IRQ_CHIP
select DW_APB_ICTL
select DW_APB_TIMER_OF
+ select PINCTRL
if ARCH_BERLIN
@@ -14,11 +16,19 @@ config MACH_BERLIN_BG2
select CACHE_L2X0
select CPU_PJ4B
select HAVE_ARM_TWD if SMP
+ select PINCTRL_BERLIN_BG2
config MACH_BERLIN_BG2CD
bool "Marvell Armada 1500-mini (BG2CD)"
select CACHE_L2X0
select HAVE_ARM_TWD if SMP
+ select PINCTRL_BERLIN_BG2CD
+
+config MACH_BERLIN_BG2Q
+ bool "Marvell Armada 1500 Pro (BG2-Q)"
+ select CACHE_L2X0
+ select HAVE_ARM_TWD if SMP
+ select PINCTRL_BERLIN_BG2Q
endmenu
diff --git a/arch/arm/mach-dove/irq.c b/arch/arm/mach-dove/irq.c
index bc4344aa1009..4a5a7aedcb76 100644
--- a/arch/arm/mach-dove/irq.c
+++ b/arch/arm/mach-dove/irq.c
@@ -108,6 +108,38 @@ static int __initdata gpio2_irqs[4] = {
0,
};
+#ifdef CONFIG_MULTI_IRQ_HANDLER
+/*
+ * Compiling with both non-DT and DT support enabled, will
+ * break asm irq handler used by non-DT boards. Therefore,
+ * we provide a C-style irq handler even for non-DT boards,
+ * if MULTI_IRQ_HANDLER is set.
+ */
+
+static void __iomem *dove_irq_base = IRQ_VIRT_BASE;
+
+static asmlinkage void
+__exception_irq_entry dove_legacy_handle_irq(struct pt_regs *regs)
+{
+ u32 stat;
+
+ stat = readl_relaxed(dove_irq_base + IRQ_CAUSE_LOW_OFF);
+ stat &= readl_relaxed(dove_irq_base + IRQ_MASK_LOW_OFF);
+ if (stat) {
+ unsigned int hwirq = __fls(stat);
+ handle_IRQ(hwirq, regs);
+ return;
+ }
+ stat = readl_relaxed(dove_irq_base + IRQ_CAUSE_HIGH_OFF);
+ stat &= readl_relaxed(dove_irq_base + IRQ_MASK_HIGH_OFF);
+ if (stat) {
+ unsigned int hwirq = 32 + __fls(stat);
+ handle_IRQ(hwirq, regs);
+ return;
+ }
+}
+#endif
+
void __init dove_init_irq(void)
{
int i;
@@ -115,6 +147,10 @@ void __init dove_init_irq(void)
orion_irq_init(0, IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF);
orion_irq_init(32, IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF);
+#ifdef CONFIG_MULTI_IRQ_HANDLER
+ set_handle_irq(dove_legacy_handle_irq);
+#endif
+
/*
* Initialize gpiolib for GPIOs 0-71.
*/
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index fc8bf18e222d..d58995c9a95a 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -7,97 +7,102 @@
# Configuration options for the EXYNOS4
+config ARCH_EXYNOS
+ bool "Samsung EXYNOS" if ARCH_MULTI_V7
+ select ARCH_HAS_BANDGAP
+ select ARCH_HAS_CPUFREQ
+ select ARCH_HAS_HOLES_MEMORYMODEL
+ select ARCH_REQUIRE_GPIOLIB
+ select ARM_AMBA
+ select ARM_GIC
+ select COMMON_CLK_SAMSUNG
+ select HAVE_ARM_SCU if SMP
+ select HAVE_S3C2410_I2C if I2C
+ select HAVE_S3C2410_WATCHDOG if WATCHDOG
+ select HAVE_S3C_RTC if RTC_CLASS
+ select PINCTRL
+ select PINCTRL_EXYNOS
+ select PM_GENERIC_DOMAINS if PM_RUNTIME
+ select S5P_DEV_MFC
+ select SRAM
+ help
+ Support for SAMSUNG EXYNOS SoCs (EXYNOS4/5)
+
if ARCH_EXYNOS
menu "SAMSUNG EXYNOS SoCs Support"
+config ARCH_EXYNOS3
+ bool "SAMSUNG EXYNOS3"
+ select ARM_CPU_SUSPEND if PM
+ help
+ Samsung EXYNOS3 (Crotex-A7) SoC based systems
+
config ARCH_EXYNOS4
bool "SAMSUNG EXYNOS4"
default y
- select ARM_AMBA
- select CLKSRC_OF
+ select ARM_CPU_SUSPEND if PM_SLEEP
select CLKSRC_SAMSUNG_PWM if CPU_EXYNOS4210
select CPU_EXYNOS4210
select GIC_NON_BANKED
select KEYBOARD_SAMSUNG if INPUT_KEYBOARD
- select HAVE_ARM_SCU if SMP
- select HAVE_SMP
select MIGHT_HAVE_CACHE_L2X0
- select PINCTRL
- select PM_GENERIC_DOMAINS if PM_RUNTIME
- select S5P_DEV_MFC
help
- Samsung EXYNOS4 SoCs based systems
+ Samsung EXYNOS4 (Cortex-A9) SoC based systems
config ARCH_EXYNOS5
bool "SAMSUNG EXYNOS5"
- select ARM_AMBA
- select CLKSRC_OF
- select HAVE_ARM_SCU if SMP
- select HAVE_SMP
- select PINCTRL
+ default y
help
- Samsung EXYNOS5 (Cortex-A15) SoC based systems
+ Samsung EXYNOS5 (Cortex-A15/A7) SoC based systems
comment "EXYNOS SoCs"
+config SOC_EXYNOS3250
+ bool "SAMSUNG EXYNOS3250"
+ default y
+ depends on ARCH_EXYNOS3
+
config CPU_EXYNOS4210
bool "SAMSUNG EXYNOS4210"
default y
depends on ARCH_EXYNOS4
- select ARCH_HAS_BANDGAP
- select ARM_CPU_SUSPEND if PM_SLEEP
- select PINCTRL_EXYNOS
- select SAMSUNG_DMADEV
- help
- Enable EXYNOS4210 CPU support
config SOC_EXYNOS4212
bool "SAMSUNG EXYNOS4212"
default y
depends on ARCH_EXYNOS4
- select ARCH_HAS_BANDGAP
- select PINCTRL_EXYNOS
- select SAMSUNG_DMADEV
- help
- Enable EXYNOS4212 SoC support
config SOC_EXYNOS4412
bool "SAMSUNG EXYNOS4412"
default y
depends on ARCH_EXYNOS4
- select ARCH_HAS_BANDGAP
- select PINCTRL_EXYNOS
- select SAMSUNG_DMADEV
- help
- Enable EXYNOS4412 SoC support
config SOC_EXYNOS5250
bool "SAMSUNG EXYNOS5250"
default y
depends on ARCH_EXYNOS5
- select ARCH_HAS_BANDGAP
- select PINCTRL_EXYNOS
- select PM_GENERIC_DOMAINS if PM_RUNTIME
- select S5P_DEV_MFC
- select SAMSUNG_DMADEV
- help
- Enable EXYNOS5250 SoC support
+
+config SOC_EXYNOS5260
+ bool "SAMSUNG EXYNOS5260"
+ default y
+ depends on ARCH_EXYNOS5
+
+config SOC_EXYNOS5410
+ bool "SAMSUNG EXYNOS5410"
+ default y
+ depends on ARCH_EXYNOS5
config SOC_EXYNOS5420
bool "SAMSUNG EXYNOS5420"
default y
depends on ARCH_EXYNOS5
- select PM_GENERIC_DOMAINS if PM_RUNTIME
- help
- Enable EXYNOS5420 SoC support
config SOC_EXYNOS5440
bool "SAMSUNG EXYNOS5440"
default y
depends on ARCH_EXYNOS5
select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE
- select ARCH_HAS_BANDGAP
select ARCH_HAS_OPP
select HAVE_ARM_ARCH_TIMER
select AUTO_ZRELADDR
@@ -108,6 +113,19 @@ config SOC_EXYNOS5440
help
Enable EXYNOS5440 SoC support
+config SOC_EXYNOS5800
+ bool "SAMSUNG EXYNOS5800"
+ default y
+ depends on SOC_EXYNOS5420
+
endmenu
+config EXYNOS5420_MCPM
+ bool "Exynos5420 Multi-Cluster PM support"
+ depends on MCPM && SOC_EXYNOS5420
+ select ARM_CCI
+ help
+ This is needed to provide CPU and cluster power management
+ on Exynos5420 implementing big.LITTLE.
+
endif
diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile
index f6dcc256db56..9f3258880949 100644
--- a/arch/arm/mach-exynos/Makefile
+++ b/arch/arm/mach-exynos/Makefile
@@ -5,6 +5,8 @@
#
# Licensed under GPLv2
+ccflags-$(CONFIG_ARCH_MULTIPLATFORM) += -I$(srctree)/$(src)/include -I$(srctree)/arch/arm/plat-samsung/include
+
obj-y :=
obj-m :=
obj-n :=
@@ -21,6 +23,10 @@ obj-$(CONFIG_CPU_IDLE) += cpuidle.o
obj-$(CONFIG_SMP) += platsmp.o headsmp.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
+CFLAGS_hotplug.o += -march=armv7-a
plus_sec := $(call as-instr,.arch_extension sec,+sec)
AFLAGS_exynos-smc.o :=-Wa,-march=armv7-a$(plus_sec)
+
+obj-$(CONFIG_EXYNOS5420_MCPM) += mcpm-exynos.o
+CFLAGS_mcpm-exynos.o += -march=armv7-a
diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h
index c1a2f2207af0..5dba5a1ee6c2 100644
--- a/arch/arm/mach-exynos/common.h
+++ b/arch/arm/mach-exynos/common.h
@@ -15,14 +15,19 @@
#include <linux/reboot.h>
#include <linux/of.h>
+#define EXYNOS3250_SOC_ID 0xE3472000
+#define EXYNOS3_SOC_MASK 0xFFFFF000
+
#define EXYNOS4210_CPU_ID 0x43210000
#define EXYNOS4212_CPU_ID 0x43220000
#define EXYNOS4412_CPU_ID 0xE4412200
#define EXYNOS4_CPU_MASK 0xFFFE0000
#define EXYNOS5250_SOC_ID 0x43520000
+#define EXYNOS5410_SOC_ID 0xE5410000
#define EXYNOS5420_SOC_ID 0xE5420000
#define EXYNOS5440_SOC_ID 0xE5440000
+#define EXYNOS5800_SOC_ID 0xE5422000
#define EXYNOS5_SOC_MASK 0xFFFFF000
extern unsigned long samsung_cpu_id;
@@ -33,12 +38,21 @@ static inline int is_samsung_##name(void) \
return ((samsung_cpu_id & mask) == (id & mask)); \
}
+IS_SAMSUNG_CPU(exynos3250, EXYNOS3250_SOC_ID, EXYNOS3_SOC_MASK)
IS_SAMSUNG_CPU(exynos4210, EXYNOS4210_CPU_ID, EXYNOS4_CPU_MASK)
IS_SAMSUNG_CPU(exynos4212, EXYNOS4212_CPU_ID, EXYNOS4_CPU_MASK)
IS_SAMSUNG_CPU(exynos4412, EXYNOS4412_CPU_ID, EXYNOS4_CPU_MASK)
IS_SAMSUNG_CPU(exynos5250, EXYNOS5250_SOC_ID, EXYNOS5_SOC_MASK)
+IS_SAMSUNG_CPU(exynos5410, EXYNOS5410_SOC_ID, EXYNOS5_SOC_MASK)
IS_SAMSUNG_CPU(exynos5420, EXYNOS5420_SOC_ID, EXYNOS5_SOC_MASK)
IS_SAMSUNG_CPU(exynos5440, EXYNOS5440_SOC_ID, EXYNOS5_SOC_MASK)
+IS_SAMSUNG_CPU(exynos5800, EXYNOS5800_SOC_ID, EXYNOS5_SOC_MASK)
+
+#if defined(CONFIG_SOC_EXYNOS3250)
+# define soc_is_exynos3250() is_samsung_exynos3250()
+#else
+# define soc_is_exynos3250() 0
+#endif
#if defined(CONFIG_CPU_EXYNOS4210)
# define soc_is_exynos4210() is_samsung_exynos4210()
@@ -68,6 +82,12 @@ IS_SAMSUNG_CPU(exynos5440, EXYNOS5440_SOC_ID, EXYNOS5_SOC_MASK)
# define soc_is_exynos5250() 0
#endif
+#if defined(CONFIG_SOC_EXYNOS5410)
+# define soc_is_exynos5410() is_samsung_exynos5410()
+#else
+# define soc_is_exynos5410() 0
+#endif
+
#if defined(CONFIG_SOC_EXYNOS5420)
# define soc_is_exynos5420() is_samsung_exynos5420()
#else
@@ -80,13 +100,21 @@ IS_SAMSUNG_CPU(exynos5440, EXYNOS5440_SOC_ID, EXYNOS5_SOC_MASK)
# define soc_is_exynos5440() 0
#endif
+#if defined(CONFIG_SOC_EXYNOS5800)
+# define soc_is_exynos5800() is_samsung_exynos5800()
+#else
+# define soc_is_exynos5800() 0
+#endif
+
#define soc_is_exynos4() (soc_is_exynos4210() || soc_is_exynos4212() || \
soc_is_exynos4412())
-#define soc_is_exynos5() (soc_is_exynos5250() || soc_is_exynos5420())
+#define soc_is_exynos5() (soc_is_exynos5250() || soc_is_exynos5410() || \
+ soc_is_exynos5420() || soc_is_exynos5800())
void mct_init(void __iomem *base, int irq_g0, int irq_l0, int irq_l1);
struct map_desc;
+extern void __iomem *sysram_ns_base_addr;
void exynos_init_io(void);
void exynos_restart(enum reboot_mode mode, const char *cmd);
void exynos_cpuidle_init(void);
@@ -131,6 +159,12 @@ struct exynos_pmu_conf {
};
extern void exynos_sys_powerdown_conf(enum sys_powerdown mode);
+extern void exynos_cpu_power_down(int cpu);
+extern void exynos_cpu_power_up(int cpu);
+extern int exynos_cpu_power_state(int cpu);
+extern void exynos_cluster_power_down(int cluster);
+extern void exynos_cluster_power_up(int cluster);
+extern int exynos_cluster_power_state(int cluster);
extern void s5p_init_cpu(void __iomem *cpuid_addr);
extern unsigned int samsung_rev(void);
diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c
index 59aab756702e..4800b1ce3d71 100644
--- a/arch/arm/mach-exynos/exynos.c
+++ b/arch/arm/mach-exynos/exynos.c
@@ -112,51 +112,6 @@ static struct map_desc exynos4_iodesc[] __initdata = {
},
};
-static struct map_desc exynos4_iodesc0[] __initdata = {
- {
- .virtual = (unsigned long)S5P_VA_SYSRAM,
- .pfn = __phys_to_pfn(EXYNOS4_PA_SYSRAM0),
- .length = SZ_4K,
- .type = MT_DEVICE,
- },
-};
-
-static struct map_desc exynos4_iodesc1[] __initdata = {
- {
- .virtual = (unsigned long)S5P_VA_SYSRAM,
- .pfn = __phys_to_pfn(EXYNOS4_PA_SYSRAM1),
- .length = SZ_4K,
- .type = MT_DEVICE,
- },
-};
-
-static struct map_desc exynos4210_iodesc[] __initdata = {
- {
- .virtual = (unsigned long)S5P_VA_SYSRAM_NS,
- .pfn = __phys_to_pfn(EXYNOS4210_PA_SYSRAM_NS),
- .length = SZ_4K,
- .type = MT_DEVICE,
- },
-};
-
-static struct map_desc exynos4x12_iodesc[] __initdata = {
- {
- .virtual = (unsigned long)S5P_VA_SYSRAM_NS,
- .pfn = __phys_to_pfn(EXYNOS4x12_PA_SYSRAM_NS),
- .length = SZ_4K,
- .type = MT_DEVICE,
- },
-};
-
-static struct map_desc exynos5250_iodesc[] __initdata = {
- {
- .virtual = (unsigned long)S5P_VA_SYSRAM_NS,
- .pfn = __phys_to_pfn(EXYNOS5250_PA_SYSRAM_NS),
- .length = SZ_4K,
- .type = MT_DEVICE,
- },
-};
-
static struct map_desc exynos5_iodesc[] __initdata = {
{
.virtual = (unsigned long)S3C_VA_SYS,
@@ -179,11 +134,6 @@ static struct map_desc exynos5_iodesc[] __initdata = {
.length = SZ_4K,
.type = MT_DEVICE,
}, {
- .virtual = (unsigned long)S5P_VA_SYSRAM,
- .pfn = __phys_to_pfn(EXYNOS5_PA_SYSRAM),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
.virtual = (unsigned long)S5P_VA_CMU,
.pfn = __phys_to_pfn(EXYNOS5_PA_CMU),
.length = 144 * SZ_1K,
@@ -278,20 +228,6 @@ static void __init exynos_map_io(void)
if (soc_is_exynos5())
iotable_init(exynos5_iodesc, ARRAY_SIZE(exynos5_iodesc));
-
- if (soc_is_exynos4210()) {
- if (samsung_rev() == EXYNOS4210_REV_0)
- iotable_init(exynos4_iodesc0,
- ARRAY_SIZE(exynos4_iodesc0));
- else
- iotable_init(exynos4_iodesc1,
- ARRAY_SIZE(exynos4_iodesc1));
- iotable_init(exynos4210_iodesc, ARRAY_SIZE(exynos4210_iodesc));
- }
- if (soc_is_exynos4212() || soc_is_exynos4412())
- iotable_init(exynos4x12_iodesc, ARRAY_SIZE(exynos4x12_iodesc));
- if (soc_is_exynos5250())
- iotable_init(exynos5250_iodesc, ARRAY_SIZE(exynos5250_iodesc));
}
void __init exynos_init_io(void)
@@ -310,6 +246,9 @@ static int __init exynos4_l2x0_cache_init(void)
{
int ret;
+ if (!soc_is_exynos4())
+ return 0;
+
ret = l2x0_of_init(L2_AUX_VAL, L2_AUX_MASK);
if (ret)
return ret;
@@ -357,12 +296,15 @@ static void __init exynos_dt_machine_init(void)
}
static char const *exynos_dt_compat[] __initconst = {
+ "samsung,exynos3",
+ "samsung,exynos3250",
"samsung,exynos4",
"samsung,exynos4210",
"samsung,exynos4212",
"samsung,exynos4412",
"samsung,exynos5",
"samsung,exynos5250",
+ "samsung,exynos5260",
"samsung,exynos5420",
"samsung,exynos5440",
NULL
diff --git a/arch/arm/mach-exynos/firmware.c b/arch/arm/mach-exynos/firmware.c
index f6cb510aee85..eb91d2350f8c 100644
--- a/arch/arm/mach-exynos/firmware.c
+++ b/arch/arm/mach-exynos/firmware.c
@@ -30,6 +30,13 @@ static int exynos_do_idle(void)
static int exynos_cpu_boot(int cpu)
{
/*
+ * Exynos3250 doesn't need to send smc command for secondary CPU boot
+ * because Exynos3250 removes WFE in secure mode.
+ */
+ if (soc_is_exynos3250())
+ return 0;
+
+ /*
* The second parameter of SMC_CMD_CPU1BOOT command means CPU id.
* But, Exynos4212 has only one secondary CPU so second parameter
* isn't used for informing secure firmware about CPU id.
@@ -43,9 +50,14 @@ static int exynos_cpu_boot(int cpu)
static int exynos_set_cpu_boot_addr(int cpu, unsigned long boot_addr)
{
- void __iomem *boot_reg = S5P_VA_SYSRAM_NS + 0x1c;
+ void __iomem *boot_reg;
+
+ if (!sysram_ns_base_addr)
+ return -ENODEV;
+
+ boot_reg = sysram_ns_base_addr + 0x1c;
- if (!soc_is_exynos4212())
+ if (!soc_is_exynos4212() && !soc_is_exynos3250())
boot_reg += 4*cpu;
__raw_writel(boot_addr, boot_reg);
diff --git a/arch/arm/mach-exynos/hotplug.c b/arch/arm/mach-exynos/hotplug.c
index 3cab3f506689..69fa48397394 100644
--- a/arch/arm/mach-exynos/hotplug.c
+++ b/arch/arm/mach-exynos/hotplug.c
@@ -44,7 +44,7 @@ static inline void platform_do_lowpower(unsigned int cpu, int *spurious)
/* make cpu1 to be turned off at next WFI command */
if (cpu == 1)
- __raw_writel(0, S5P_ARM_CORE1_CONFIGURATION);
+ exynos_cpu_power_down(cpu);
/*
* here's the WFI
diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h
index 7b046b59d9ec..548269a60634 100644
--- a/arch/arm/mach-exynos/include/mach/map.h
+++ b/arch/arm/mach-exynos/include/mach/map.h
@@ -23,13 +23,6 @@
#include <plat/map-s5p.h>
-#define EXYNOS4_PA_SYSRAM0 0x02025000
-#define EXYNOS4_PA_SYSRAM1 0x02020000
-#define EXYNOS5_PA_SYSRAM 0x02020000
-#define EXYNOS4210_PA_SYSRAM_NS 0x0203F000
-#define EXYNOS4x12_PA_SYSRAM_NS 0x0204F000
-#define EXYNOS5250_PA_SYSRAM_NS 0x0204F000
-
#define EXYNOS_PA_CHIPID 0x10000000
#define EXYNOS4_PA_SYSCON 0x10010000
diff --git a/arch/arm/mach-exynos/mcpm-exynos.c b/arch/arm/mach-exynos/mcpm-exynos.c
new file mode 100644
index 000000000000..0498d0b887ef
--- /dev/null
+++ b/arch/arm/mach-exynos/mcpm-exynos.c
@@ -0,0 +1,357 @@
+/*
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * arch/arm/mach-exynos/mcpm-exynos.c
+ *
+ * Based on arch/arm/mach-vexpress/dcscb.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/arm-cci.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/of_address.h>
+
+#include <asm/cputype.h>
+#include <asm/cp15.h>
+#include <asm/mcpm.h>
+
+#include "regs-pmu.h"
+#include "common.h"
+
+#define EXYNOS5420_CPUS_PER_CLUSTER 4
+#define EXYNOS5420_NR_CLUSTERS 2
+#define MCPM_BOOT_ADDR_OFFSET 0x1c
+
+/*
+ * The common v7_exit_coherency_flush API could not be used because of the
+ * Erratum 799270 workaround. This macro is the same as the common one (in
+ * arch/arm/include/asm/cacheflush.h) except for the erratum handling.
+ */
+#define exynos_v7_exit_coherency_flush(level) \
+ asm volatile( \
+ "stmfd sp!, {fp, ip}\n\t"\
+ "mrc p15, 0, r0, c1, c0, 0 @ get SCTLR\n\t" \
+ "bic r0, r0, #"__stringify(CR_C)"\n\t" \
+ "mcr p15, 0, r0, c1, c0, 0 @ set SCTLR\n\t" \
+ "isb\n\t"\
+ "bl v7_flush_dcache_"__stringify(level)"\n\t" \
+ "clrex\n\t"\
+ "mrc p15, 0, r0, c1, c0, 1 @ get ACTLR\n\t" \
+ "bic r0, r0, #(1 << 6) @ disable local coherency\n\t" \
+ /* Dummy Load of a device register to avoid Erratum 799270 */ \
+ "ldr r4, [%0]\n\t" \
+ "and r4, r4, #0\n\t" \
+ "orr r0, r0, r4\n\t" \
+ "mcr p15, 0, r0, c1, c0, 1 @ set ACTLR\n\t" \
+ "isb\n\t" \
+ "dsb\n\t" \
+ "ldmfd sp!, {fp, ip}" \
+ : \
+ : "Ir" (S5P_INFORM0) \
+ : "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", \
+ "r9", "r10", "lr", "memory")
+
+/*
+ * We can't use regular spinlocks. In the switcher case, it is possible
+ * for an outbound CPU to call power_down() after its inbound counterpart
+ * is already live using the same logical CPU number which trips lockdep
+ * debugging.
+ */
+static arch_spinlock_t exynos_mcpm_lock = __ARCH_SPIN_LOCK_UNLOCKED;
+static int
+cpu_use_count[EXYNOS5420_CPUS_PER_CLUSTER][EXYNOS5420_NR_CLUSTERS];
+
+#define exynos_cluster_usecnt(cluster) \
+ (cpu_use_count[0][cluster] + \
+ cpu_use_count[1][cluster] + \
+ cpu_use_count[2][cluster] + \
+ cpu_use_count[3][cluster])
+
+#define exynos_cluster_unused(cluster) !exynos_cluster_usecnt(cluster)
+
+static int exynos_cluster_power_control(unsigned int cluster, int enable)
+{
+ unsigned int tries = 100;
+ unsigned int val;
+
+ if (enable) {
+ exynos_cluster_power_up(cluster);
+ val = S5P_CORE_LOCAL_PWR_EN;
+ } else {
+ exynos_cluster_power_down(cluster);
+ val = 0;
+ }
+
+ /* Wait until cluster power control is applied */
+ while (tries--) {
+ if (exynos_cluster_power_state(cluster) == val)
+ return 0;
+
+ cpu_relax();
+ }
+ pr_debug("timed out waiting for cluster %u to power %s\n", cluster,
+ enable ? "on" : "off");
+
+ return -ETIMEDOUT;
+}
+
+static int exynos_power_up(unsigned int cpu, unsigned int cluster)
+{
+ unsigned int cpunr = cpu + (cluster * EXYNOS5420_CPUS_PER_CLUSTER);
+ int err = 0;
+
+ pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster);
+ if (cpu >= EXYNOS5420_CPUS_PER_CLUSTER ||
+ cluster >= EXYNOS5420_NR_CLUSTERS)
+ return -EINVAL;
+
+ /*
+ * Since this is called with IRQs enabled, and no arch_spin_lock_irq
+ * variant exists, we need to disable IRQs manually here.
+ */
+ local_irq_disable();
+ arch_spin_lock(&exynos_mcpm_lock);
+
+ cpu_use_count[cpu][cluster]++;
+ if (cpu_use_count[cpu][cluster] == 1) {
+ bool was_cluster_down =
+ (exynos_cluster_usecnt(cluster) == 1);
+
+ /*
+ * Turn on the cluster (L2/COMMON) and then power on the
+ * cores.
+ */
+ if (was_cluster_down)
+ err = exynos_cluster_power_control(cluster, 1);
+
+ if (!err)
+ exynos_cpu_power_up(cpunr);
+ else
+ exynos_cluster_power_control(cluster, 0);
+ } else if (cpu_use_count[cpu][cluster] != 2) {
+ /*
+ * The only possible values are:
+ * 0 = CPU down
+ * 1 = CPU (still) up
+ * 2 = CPU requested to be up before it had a chance
+ * to actually make itself down.
+ * Any other value is a bug.
+ */
+ BUG();
+ }
+
+ arch_spin_unlock(&exynos_mcpm_lock);
+ local_irq_enable();
+
+ return err;
+}
+
+/*
+ * NOTE: This function requires the stack data to be visible through power down
+ * and can only be executed on processors like A15 and A7 that hit the cache
+ * with the C bit clear in the SCTLR register.
+ */
+static void exynos_power_down(void)
+{
+ unsigned int mpidr, cpu, cluster;
+ bool last_man = false, skip_wfi = false;
+ unsigned int cpunr;
+
+ mpidr = read_cpuid_mpidr();
+ cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
+ cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
+ cpunr = cpu + (cluster * EXYNOS5420_CPUS_PER_CLUSTER);
+
+ pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster);
+ BUG_ON(cpu >= EXYNOS5420_CPUS_PER_CLUSTER ||
+ cluster >= EXYNOS5420_NR_CLUSTERS);
+
+ __mcpm_cpu_going_down(cpu, cluster);
+
+ arch_spin_lock(&exynos_mcpm_lock);
+ BUG_ON(__mcpm_cluster_state(cluster) != CLUSTER_UP);
+ cpu_use_count[cpu][cluster]--;
+ if (cpu_use_count[cpu][cluster] == 0) {
+ exynos_cpu_power_down(cpunr);
+
+ if (exynos_cluster_unused(cluster))
+ /* TODO: Turn off the cluster here to save power. */
+ last_man = true;
+ } else if (cpu_use_count[cpu][cluster] == 1) {
+ /*
+ * A power_up request went ahead of us.
+ * Even if we do not want to shut this CPU down,
+ * the caller expects a certain state as if the WFI
+ * was aborted. So let's continue with cache cleaning.
+ */
+ skip_wfi = true;
+ } else {
+ BUG();
+ }
+
+ if (last_man && __mcpm_outbound_enter_critical(cpu, cluster)) {
+ arch_spin_unlock(&exynos_mcpm_lock);
+
+ if (read_cpuid_part_number() == ARM_CPU_PART_CORTEX_A15) {
+ /*
+ * On the Cortex-A15 we need to disable
+ * L2 prefetching before flushing the cache.
+ */
+ asm volatile(
+ "mcr p15, 1, %0, c15, c0, 3\n\t"
+ "isb\n\t"
+ "dsb"
+ : : "r" (0x400));
+ }
+
+ /* Flush all cache levels for this cluster. */
+ exynos_v7_exit_coherency_flush(all);
+
+ /*
+ * Disable cluster-level coherency by masking
+ * incoming snoops and DVM messages:
+ */
+ cci_disable_port_by_cpu(mpidr);
+
+ __mcpm_outbound_leave_critical(cluster, CLUSTER_DOWN);
+ } else {
+ arch_spin_unlock(&exynos_mcpm_lock);
+
+ /* Disable and flush the local CPU cache. */
+ exynos_v7_exit_coherency_flush(louis);
+ }
+
+ __mcpm_cpu_down(cpu, cluster);
+
+ /* Now we are prepared for power-down, do it: */
+ if (!skip_wfi)
+ wfi();
+
+ /* Not dead at this point? Let our caller cope. */
+}
+
+static int exynos_wait_for_powerdown(unsigned int cpu, unsigned int cluster)
+{
+ unsigned int tries = 100;
+ unsigned int cpunr = cpu + (cluster * EXYNOS5420_CPUS_PER_CLUSTER);
+
+ pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster);
+ BUG_ON(cpu >= EXYNOS5420_CPUS_PER_CLUSTER ||
+ cluster >= EXYNOS5420_NR_CLUSTERS);
+
+ /* Wait for the core state to be OFF */
+ while (tries--) {
+ if (ACCESS_ONCE(cpu_use_count[cpu][cluster]) == 0) {
+ if ((exynos_cpu_power_state(cpunr) == 0))
+ return 0; /* success: the CPU is halted */
+ }
+
+ /* Otherwise, wait and retry: */
+ msleep(1);
+ }
+
+ return -ETIMEDOUT; /* timeout */
+}
+
+static const struct mcpm_platform_ops exynos_power_ops = {
+ .power_up = exynos_power_up,
+ .power_down = exynos_power_down,
+ .wait_for_powerdown = exynos_wait_for_powerdown,
+};
+
+static void __init exynos_mcpm_usage_count_init(void)
+{
+ unsigned int mpidr, cpu, cluster;
+
+ mpidr = read_cpuid_mpidr();
+ cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
+ cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
+
+ pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster);
+ BUG_ON(cpu >= EXYNOS5420_CPUS_PER_CLUSTER ||
+ cluster >= EXYNOS5420_NR_CLUSTERS);
+
+ cpu_use_count[cpu][cluster] = 1;
+}
+
+/*
+ * Enable cluster-level coherency, in preparation for turning on the MMU.
+ */
+static void __naked exynos_pm_power_up_setup(unsigned int affinity_level)
+{
+ asm volatile ("\n"
+ "cmp r0, #1\n"
+ "bxne lr\n"
+ "b cci_enable_port_for_self");
+}
+
+static const struct of_device_id exynos_dt_mcpm_match[] = {
+ { .compatible = "samsung,exynos5420" },
+ { .compatible = "samsung,exynos5800" },
+ {},
+};
+
+static int __init exynos_mcpm_init(void)
+{
+ struct device_node *node;
+ void __iomem *ns_sram_base_addr;
+ int ret;
+
+ node = of_find_matching_node(NULL, exynos_dt_mcpm_match);
+ if (!node)
+ return -ENODEV;
+ of_node_put(node);
+
+ if (!cci_probed())
+ return -ENODEV;
+
+ node = of_find_compatible_node(NULL, NULL,
+ "samsung,exynos4210-sysram-ns");
+ if (!node)
+ return -ENODEV;
+
+ ns_sram_base_addr = of_iomap(node, 0);
+ of_node_put(node);
+ if (!ns_sram_base_addr) {
+ pr_err("failed to map non-secure iRAM base address\n");
+ return -ENOMEM;
+ }
+
+ /*
+ * To increase the stability of KFC reset we need to program
+ * the PMU SPARE3 register
+ */
+ __raw_writel(EXYNOS5420_SWRESET_KFC_SEL, S5P_PMU_SPARE3);
+
+ exynos_mcpm_usage_count_init();
+
+ ret = mcpm_platform_register(&exynos_power_ops);
+ if (!ret)
+ ret = mcpm_sync_init(exynos_pm_power_up_setup);
+ if (ret) {
+ iounmap(ns_sram_base_addr);
+ return ret;
+ }
+
+ mcpm_smp_set_ops();
+
+ pr_info("Exynos MCPM support installed\n");
+
+ /*
+ * Future entries into the kernel can now go
+ * through the cluster entry vectors.
+ */
+ __raw_writel(virt_to_phys(mcpm_entry_point),
+ ns_sram_base_addr + MCPM_BOOT_ADDR_OFFSET);
+
+ iounmap(ns_sram_base_addr);
+
+ return ret;
+}
+
+early_initcall(exynos_mcpm_init);
diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c
index c28cdb1c82cd..112bc66927a1 100644
--- a/arch/arm/mach-exynos/platsmp.c
+++ b/arch/arm/mach-exynos/platsmp.c
@@ -20,6 +20,7 @@
#include <linux/jiffies.h>
#include <linux/smp.h>
#include <linux/io.h>
+#include <linux/of_address.h>
#include <asm/cacheflush.h>
#include <asm/smp_plat.h>
@@ -31,11 +32,33 @@
extern void exynos4_secondary_startup(void);
+static void __iomem *sysram_base_addr;
+void __iomem *sysram_ns_base_addr;
+
+static void __init exynos_smp_prepare_sysram(void)
+{
+ struct device_node *node;
+
+ for_each_compatible_node(node, NULL, "samsung,exynos4210-sysram") {
+ if (!of_device_is_available(node))
+ continue;
+ sysram_base_addr = of_iomap(node, 0);
+ break;
+ }
+
+ for_each_compatible_node(node, NULL, "samsung,exynos4210-sysram-ns") {
+ if (!of_device_is_available(node))
+ continue;
+ sysram_ns_base_addr = of_iomap(node, 0);
+ break;
+ }
+}
+
static inline void __iomem *cpu_boot_reg_base(void)
{
if (soc_is_exynos4210() && samsung_rev() == EXYNOS4210_REV_1_1)
return S5P_INFORM5;
- return S5P_VA_SYSRAM;
+ return sysram_base_addr;
}
static inline void __iomem *cpu_boot_reg(int cpu)
@@ -43,9 +66,11 @@ static inline void __iomem *cpu_boot_reg(int cpu)
void __iomem *boot_reg;
boot_reg = cpu_boot_reg_base();
+ if (!boot_reg)
+ return ERR_PTR(-ENODEV);
if (soc_is_exynos4412())
boot_reg += 4*cpu;
- else if (soc_is_exynos5420())
+ else if (soc_is_exynos5420() || soc_is_exynos5800())
boot_reg += 4;
return boot_reg;
}
@@ -88,6 +113,7 @@ static int exynos_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
unsigned long timeout;
unsigned long phys_cpu = cpu_logical_map(cpu);
+ int ret = -ENOSYS;
/*
* Set synchronisation state between this boot processor
@@ -105,15 +131,12 @@ static int exynos_boot_secondary(unsigned int cpu, struct task_struct *idle)
*/
write_pen_release(phys_cpu);
- if (!(__raw_readl(S5P_ARM_CORE1_STATUS) & S5P_CORE_LOCAL_PWR_EN)) {
- __raw_writel(S5P_CORE_LOCAL_PWR_EN,
- S5P_ARM_CORE1_CONFIGURATION);
-
+ if (!exynos_cpu_power_state(cpu)) {
+ exynos_cpu_power_up(cpu);
timeout = 10;
/* wait max 10 ms until cpu1 is on */
- while ((__raw_readl(S5P_ARM_CORE1_STATUS)
- & S5P_CORE_LOCAL_PWR_EN) != S5P_CORE_LOCAL_PWR_EN) {
+ while (exynos_cpu_power_state(cpu) != S5P_CORE_LOCAL_PWR_EN) {
if (timeout-- == 0)
break;
@@ -144,8 +167,18 @@ static int exynos_boot_secondary(unsigned int cpu, struct task_struct *idle)
* Try to set boot address using firmware first
* and fall back to boot register if it fails.
*/
- if (call_firmware_op(set_cpu_boot_addr, phys_cpu, boot_addr))
+ ret = call_firmware_op(set_cpu_boot_addr, phys_cpu, boot_addr);
+ if (ret && ret != -ENOSYS)
+ goto fail;
+ if (ret == -ENOSYS) {
+ void __iomem *boot_reg = cpu_boot_reg(phys_cpu);
+
+ if (IS_ERR(boot_reg)) {
+ ret = PTR_ERR(boot_reg);
+ goto fail;
+ }
__raw_writel(boot_addr, cpu_boot_reg(phys_cpu));
+ }
call_firmware_op(cpu_boot, phys_cpu);
@@ -161,9 +194,10 @@ static int exynos_boot_secondary(unsigned int cpu, struct task_struct *idle)
* now the secondary core is starting up let it run its
* calibrations, then wait for it to finish
*/
+fail:
spin_unlock(&boot_lock);
- return pen_release != -1 ? -ENOSYS : 0;
+ return pen_release != -1 ? ret : 0;
}
/*
@@ -203,6 +237,8 @@ static void __init exynos_smp_prepare_cpus(unsigned int max_cpus)
if (read_cpuid_part_number() == ARM_CPU_PART_CORTEX_A9)
scu_enable(scu_base_addr());
+ exynos_smp_prepare_sysram();
+
/*
* Write the address of secondary startup into the
* system-wide flags register. The boot monitor waits
@@ -215,12 +251,21 @@ static void __init exynos_smp_prepare_cpus(unsigned int max_cpus)
for (i = 1; i < max_cpus; ++i) {
unsigned long phys_cpu;
unsigned long boot_addr;
+ int ret;
phys_cpu = cpu_logical_map(i);
boot_addr = virt_to_phys(exynos4_secondary_startup);
- if (call_firmware_op(set_cpu_boot_addr, phys_cpu, boot_addr))
+ ret = call_firmware_op(set_cpu_boot_addr, phys_cpu, boot_addr);
+ if (ret && ret != -ENOSYS)
+ break;
+ if (ret == -ENOSYS) {
+ void __iomem *boot_reg = cpu_boot_reg(phys_cpu);
+
+ if (IS_ERR(boot_reg))
+ break;
__raw_writel(boot_addr, cpu_boot_reg(phys_cpu));
+ }
}
}
diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c
index ca672e24b5cd..aba2ff6e443d 100644
--- a/arch/arm/mach-exynos/pm.c
+++ b/arch/arm/mach-exynos/pm.c
@@ -99,6 +99,72 @@ static int exynos_irq_set_wake(struct irq_data *data, unsigned int state)
return -ENOENT;
}
+/**
+ * exynos_core_power_down : power down the specified cpu
+ * @cpu : the cpu to power down
+ *
+ * Power down the specified cpu. The sequence must be finished by a
+ * call to cpu_do_idle()
+ *
+ */
+void exynos_cpu_power_down(int cpu)
+{
+ __raw_writel(0, EXYNOS_ARM_CORE_CONFIGURATION(cpu));
+}
+
+/**
+ * exynos_cpu_power_up : power up the specified cpu
+ * @cpu : the cpu to power up
+ *
+ * Power up the specified cpu
+ */
+void exynos_cpu_power_up(int cpu)
+{
+ __raw_writel(S5P_CORE_LOCAL_PWR_EN,
+ EXYNOS_ARM_CORE_CONFIGURATION(cpu));
+}
+
+/**
+ * exynos_cpu_power_state : returns the power state of the cpu
+ * @cpu : the cpu to retrieve the power state from
+ *
+ */
+int exynos_cpu_power_state(int cpu)
+{
+ return (__raw_readl(EXYNOS_ARM_CORE_STATUS(cpu)) &
+ S5P_CORE_LOCAL_PWR_EN);
+}
+
+/**
+ * exynos_cluster_power_down : power down the specified cluster
+ * @cluster : the cluster to power down
+ */
+void exynos_cluster_power_down(int cluster)
+{
+ __raw_writel(0, EXYNOS_COMMON_CONFIGURATION(cluster));
+}
+
+/**
+ * exynos_cluster_power_up : power up the specified cluster
+ * @cluster : the cluster to power up
+ */
+void exynos_cluster_power_up(int cluster)
+{
+ __raw_writel(S5P_CORE_LOCAL_PWR_EN,
+ EXYNOS_COMMON_CONFIGURATION(cluster));
+}
+
+/**
+ * exynos_cluster_power_state : returns the power state of the cluster
+ * @cluster : the cluster to retrieve the power state from
+ *
+ */
+int exynos_cluster_power_state(int cluster)
+{
+ return (__raw_readl(EXYNOS_COMMON_STATUS(cluster)) &
+ S5P_CORE_LOCAL_PWR_EN);
+}
+
/* For Cortex-A9 Diagnostic and Power control register */
static unsigned int save_arm_register[2];
diff --git a/arch/arm/mach-exynos/regs-pmu.h b/arch/arm/mach-exynos/regs-pmu.h
index 4f6a2560d022..4179f6a6d595 100644
--- a/arch/arm/mach-exynos/regs-pmu.h
+++ b/arch/arm/mach-exynos/regs-pmu.h
@@ -38,6 +38,7 @@
#define S5P_INFORM5 S5P_PMUREG(0x0814)
#define S5P_INFORM6 S5P_PMUREG(0x0818)
#define S5P_INFORM7 S5P_PMUREG(0x081C)
+#define S5P_PMU_SPARE3 S5P_PMUREG(0x090C)
#define S5P_ARM_CORE0_LOWPWR S5P_PMUREG(0x1000)
#define S5P_DIS_IRQ_CORE0 S5P_PMUREG(0x1004)
@@ -105,8 +106,17 @@
#define S5P_GPS_LOWPWR S5P_PMUREG(0x139C)
#define S5P_GPS_ALIVE_LOWPWR S5P_PMUREG(0x13A0)
-#define S5P_ARM_CORE1_CONFIGURATION S5P_PMUREG(0x2080)
-#define S5P_ARM_CORE1_STATUS S5P_PMUREG(0x2084)
+#define EXYNOS_ARM_CORE0_CONFIGURATION S5P_PMUREG(0x2000)
+#define EXYNOS_ARM_CORE_CONFIGURATION(_nr) \
+ (EXYNOS_ARM_CORE0_CONFIGURATION + (0x80 * (_nr)))
+#define EXYNOS_ARM_CORE_STATUS(_nr) \
+ (EXYNOS_ARM_CORE_CONFIGURATION(_nr) + 0x4)
+
+#define EXYNOS_ARM_COMMON_CONFIGURATION S5P_PMUREG(0x2500)
+#define EXYNOS_COMMON_CONFIGURATION(_nr) \
+ (EXYNOS_ARM_COMMON_CONFIGURATION + (0x80 * (_nr)))
+#define EXYNOS_COMMON_STATUS(_nr) \
+ (EXYNOS_COMMON_CONFIGURATION(_nr) + 0x4)
#define S5P_PAD_RET_MAUDIO_OPTION S5P_PMUREG(0x3028)
#define S5P_PAD_RET_GPIO_OPTION S5P_PMUREG(0x3108)
@@ -313,4 +323,6 @@
#define EXYNOS5_OPTION_USE_RETENTION (1 << 4)
+#define EXYNOS5420_SWRESET_KFC_SEL 0x3
+
#endif /* __ASM_ARCH_REGS_PMU_H */
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 50bb546b893a..8d42eab76d53 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -702,61 +702,6 @@ endif
if ARCH_MULTI_V7
-comment "i.MX51 machines:"
-
-config MACH_IMX51_DT
- bool "Support i.MX51 platforms from device tree"
- select SOC_IMX51
- help
- Include support for Freescale i.MX51 based platforms
- using the device tree for discovery
-
-config MACH_MX51_BABBAGE
- bool "Support MX51 BABBAGE platforms"
- select IMX_HAVE_PLATFORM_FSL_USB2_UDC
- select IMX_HAVE_PLATFORM_IMX2_WDT
- select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_MXC_EHCI
- select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
- select IMX_HAVE_PLATFORM_SPI_IMX
- select SOC_IMX51
- help
- Include support for MX51 Babbage platform, also known as MX51EVK in
- u-boot. This includes specific configurations for the board and its
- peripherals.
-
-config MACH_EUKREA_CPUIMX51SD
- bool "Support Eukrea CPUIMX51SD module"
- select IMX_HAVE_PLATFORM_FSL_USB2_UDC
- select IMX_HAVE_PLATFORM_IMX2_WDT
- select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_MXC_EHCI
- select IMX_HAVE_PLATFORM_MXC_NAND
- select IMX_HAVE_PLATFORM_SPI_IMX
- select SOC_IMX51
- help
- Include support for Eukrea CPUIMX51SD platform. This includes
- specific configurations for the module and its peripherals.
-
-choice
- prompt "Baseboard"
- depends on MACH_EUKREA_CPUIMX51SD
- default MACH_EUKREA_MBIMXSD51_BASEBOARD
-
-config MACH_EUKREA_MBIMXSD51_BASEBOARD
- prompt "Eukrea MBIMXSD development board"
- bool
- select IMX_HAVE_PLATFORM_IMX_SSI
- select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
- select LEDS_GPIO_REGISTER
- help
- This adds board specific devices that can be found on Eukrea's
- MBIMXSD evaluation board.
-
-endchoice
-
comment "Device tree only"
config SOC_IMX50
@@ -768,6 +713,12 @@ config SOC_IMX50
help
This enables support for Freescale i.MX50 processor.
+config MACH_IMX51_DT
+ bool "i.MX51 support"
+ select SOC_IMX51
+ help
+ This enables support for Freescale i.MX51 processor
+
config SOC_IMX53
bool "i.MX53 support"
select HAVE_IMX_SRC
@@ -811,6 +762,14 @@ config SOC_IMX6SL
help
This enables support for Freescale i.MX6 SoloLite processor.
+config SOC_IMX6SX
+ bool "i.MX6 SoloX support"
+ select PINCTRL_IMX6SX
+ select SOC_IMX6
+
+ help
+ This enables support for Freescale i.MX6 SoloX processor.
+
config SOC_VF610
bool "Vybrid Family VF610 support"
select ARM_GIC
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index f4ed83032dd0..bbe93bbfd003 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -101,6 +101,7 @@ obj-$(CONFIG_SMP) += headsmp.o platsmp.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
obj-$(CONFIG_SOC_IMX6Q) += clk-imx6q.o mach-imx6q.o
obj-$(CONFIG_SOC_IMX6SL) += clk-imx6sl.o mach-imx6sl.o
+obj-$(CONFIG_SOC_IMX6SX) += clk-imx6sx.o mach-imx6sx.o
ifeq ($(CONFIG_SUSPEND),y)
AFLAGS_suspend-imx6.o :=-Wa,-march=armv7-a
@@ -108,11 +109,6 @@ obj-$(CONFIG_SOC_IMX6) += suspend-imx6.o
endif
obj-$(CONFIG_SOC_IMX6) += pm-imx6.o
-# i.MX5 based machines
-obj-$(CONFIG_MACH_MX51_BABBAGE) += mach-mx51_babbage.o
-obj-$(CONFIG_MACH_EUKREA_CPUIMX51SD) += mach-cpuimx51sd.o
-obj-$(CONFIG_MACH_EUKREA_MBIMXSD51_BASEBOARD) += eukrea_mbimxsd51-baseboard.o
-
obj-$(CONFIG_MACH_IMX51_DT) += imx51-dt.o
obj-$(CONFIG_SOC_IMX50) += mach-imx50.o
obj-$(CONFIG_SOC_IMX53) += mach-imx53.o
diff --git a/arch/arm/mach-imx/avic.c b/arch/arm/mach-imx/avic.c
index 8d1df2e4b7ac..24b103c67f82 100644
--- a/arch/arm/mach-imx/avic.c
+++ b/arch/arm/mach-imx/avic.c
@@ -135,7 +135,7 @@ static __init void avic_init_gc(int idx, unsigned int irq_start)
irq_setup_generic_chip(gc, IRQ_MSK(32), 0, IRQ_NOREQUEST, 0);
}
-asmlinkage void __exception_irq_entry avic_handle_irq(struct pt_regs *regs)
+static void __exception_irq_entry avic_handle_irq(struct pt_regs *regs)
{
u32 nivector;
@@ -190,6 +190,8 @@ void __init mxc_init_irq(void __iomem *irqbase)
for (i = 0; i < 8; i++)
__raw_writel(0, avic_base + AVIC_NIPRIORITY(i));
+ set_handle_irq(avic_handle_irq);
+
#ifdef CONFIG_FIQ
/* Initialize FIQ */
init_FIQ(FIQ_START);
diff --git a/arch/arm/mach-imx/clk-gate2.c b/arch/arm/mach-imx/clk-gate2.c
index a2ecc006b322..4ba587da89d2 100644
--- a/arch/arm/mach-imx/clk-gate2.c
+++ b/arch/arm/mach-imx/clk-gate2.c
@@ -27,48 +27,61 @@
* parent - fixed parent. No clk_set_parent support
*/
-#define to_clk_gate(_hw) container_of(_hw, struct clk_gate, hw)
+struct clk_gate2 {
+ struct clk_hw hw;
+ void __iomem *reg;
+ u8 bit_idx;
+ u8 flags;
+ spinlock_t *lock;
+ unsigned int *share_count;
+};
+
+#define to_clk_gate2(_hw) container_of(_hw, struct clk_gate2, hw)
static int clk_gate2_enable(struct clk_hw *hw)
{
- struct clk_gate *gate = to_clk_gate(hw);
+ struct clk_gate2 *gate = to_clk_gate2(hw);
u32 reg;
unsigned long flags = 0;
- if (gate->lock)
- spin_lock_irqsave(gate->lock, flags);
+ spin_lock_irqsave(gate->lock, flags);
+
+ if (gate->share_count && (*gate->share_count)++ > 0)
+ goto out;
reg = readl(gate->reg);
reg |= 3 << gate->bit_idx;
writel(reg, gate->reg);
- if (gate->lock)
- spin_unlock_irqrestore(gate->lock, flags);
+out:
+ spin_unlock_irqrestore(gate->lock, flags);
return 0;
}
static void clk_gate2_disable(struct clk_hw *hw)
{
- struct clk_gate *gate = to_clk_gate(hw);
+ struct clk_gate2 *gate = to_clk_gate2(hw);
u32 reg;
unsigned long flags = 0;
- if (gate->lock)
- spin_lock_irqsave(gate->lock, flags);
+ spin_lock_irqsave(gate->lock, flags);
+
+ if (gate->share_count && --(*gate->share_count) > 0)
+ goto out;
reg = readl(gate->reg);
reg &= ~(3 << gate->bit_idx);
writel(reg, gate->reg);
- if (gate->lock)
- spin_unlock_irqrestore(gate->lock, flags);
+out:
+ spin_unlock_irqrestore(gate->lock, flags);
}
static int clk_gate2_is_enabled(struct clk_hw *hw)
{
u32 reg;
- struct clk_gate *gate = to_clk_gate(hw);
+ struct clk_gate2 *gate = to_clk_gate2(hw);
reg = readl(gate->reg);
@@ -87,21 +100,23 @@ static struct clk_ops clk_gate2_ops = {
struct clk *clk_register_gate2(struct device *dev, const char *name,
const char *parent_name, unsigned long flags,
void __iomem *reg, u8 bit_idx,
- u8 clk_gate2_flags, spinlock_t *lock)
+ u8 clk_gate2_flags, spinlock_t *lock,
+ unsigned int *share_count)
{
- struct clk_gate *gate;
+ struct clk_gate2 *gate;
struct clk *clk;
struct clk_init_data init;
- gate = kzalloc(sizeof(struct clk_gate), GFP_KERNEL);
+ gate = kzalloc(sizeof(struct clk_gate2), GFP_KERNEL);
if (!gate)
return ERR_PTR(-ENOMEM);
- /* struct clk_gate assignments */
+ /* struct clk_gate2 assignments */
gate->reg = reg;
gate->bit_idx = bit_idx;
gate->flags = clk_gate2_flags;
gate->lock = lock;
+ gate->share_count = share_count;
init.name = name;
init.ops = &clk_gate2_ops;
diff --git a/arch/arm/mach-imx/clk-imx1.c b/arch/arm/mach-imx/clk-imx1.c
index 15f9d223cf0b..7f739be3de2c 100644
--- a/arch/arm/mach-imx/clk-imx1.c
+++ b/arch/arm/mach-imx/clk-imx1.c
@@ -40,12 +40,14 @@
#define SCM_GCCR IO_ADDR_SCM(0xc)
static const char *prem_sel_clks[] = { "clk32_premult", "clk16m", };
-static const char *clko_sel_clks[] = { "per1", "hclk", "clk48m", "clk16m", "prem",
- "fclk", };
+static const char *clko_sel_clks[] = { "per1", "hclk", "clk48m", "clk16m",
+ "prem", "fclk", };
+
enum imx1_clks {
- dummy, clk32, clk16m_ext, clk16m, clk32_premult, prem, mpll, spll, mcu,
- fclk, hclk, clk48m, per1, per2, per3, clko, dma_gate, csi_gate,
- mma_gate, usbd_gate, clk_max
+ dummy, clk32, clk16m_ext, clk16m, clk32_premult, prem, mpll, mpll_gate,
+ spll, spll_gate, mcu, fclk, hclk, clk48m, per1, per2, per3, clko,
+ uart3_gate, ssi2_gate, brom_gate, dma_gate, csi_gate, mma_gate,
+ usbd_gate, clk_max
};
static struct clk *clk[clk_max];
@@ -62,17 +64,22 @@ int __init mx1_clocks_init(unsigned long fref)
clk[prem] = imx_clk_mux("prem", CCM_CSCR, 16, 1, prem_sel_clks,
ARRAY_SIZE(prem_sel_clks));
clk[mpll] = imx_clk_pllv1("mpll", "clk32_premult", CCM_MPCTL0);
+ clk[mpll_gate] = imx_clk_gate("mpll_gate", "mpll", CCM_CSCR, 0);
clk[spll] = imx_clk_pllv1("spll", "prem", CCM_SPCTL0);
+ clk[spll_gate] = imx_clk_gate("spll_gate", "spll", CCM_CSCR, 1);
clk[mcu] = imx_clk_divider("mcu", "clk32_premult", CCM_CSCR, 15, 1);
- clk[fclk] = imx_clk_divider("fclk", "mpll", CCM_CSCR, 15, 1);
- clk[hclk] = imx_clk_divider("hclk", "spll", CCM_CSCR, 10, 4);
- clk[clk48m] = imx_clk_divider("clk48m", "spll", CCM_CSCR, 26, 3);
- clk[per1] = imx_clk_divider("per1", "spll", CCM_PCDR, 0, 4);
- clk[per2] = imx_clk_divider("per2", "spll", CCM_PCDR, 4, 4);
- clk[per3] = imx_clk_divider("per3", "spll", CCM_PCDR, 16, 7);
+ clk[fclk] = imx_clk_divider("fclk", "mpll_gate", CCM_CSCR, 15, 1);
+ clk[hclk] = imx_clk_divider("hclk", "spll_gate", CCM_CSCR, 10, 4);
+ clk[clk48m] = imx_clk_divider("clk48m", "spll_gate", CCM_CSCR, 26, 3);
+ clk[per1] = imx_clk_divider("per1", "spll_gate", CCM_PCDR, 0, 4);
+ clk[per2] = imx_clk_divider("per2", "spll_gate", CCM_PCDR, 4, 4);
+ clk[per3] = imx_clk_divider("per3", "spll_gate", CCM_PCDR, 16, 7);
clk[clko] = imx_clk_mux("clko", CCM_CSCR, 29, 3, clko_sel_clks,
ARRAY_SIZE(clko_sel_clks));
- clk[dma_gate] = imx_clk_gate("dma_gate", "hclk", SCM_GCCR, 4);
+ clk[uart3_gate] = imx_clk_gate("uart3_gate", "hclk", SCM_GCCR, 6);
+ clk[ssi2_gate] = imx_clk_gate("ssi2_gate", "hclk", SCM_GCCR, 5);
+ clk[brom_gate] = imx_clk_gate("brom_gate", "hclk", SCM_GCCR, 4);
+ clk[dma_gate] = imx_clk_gate("dma_gate", "hclk", SCM_GCCR, 3);
clk[csi_gate] = imx_clk_gate("csi_gate", "hclk", SCM_GCCR, 2);
clk[mma_gate] = imx_clk_gate("mma_gate", "hclk", SCM_GCCR, 1);
clk[usbd_gate] = imx_clk_gate("usbd_gate", "clk48m", SCM_GCCR, 0);
@@ -84,9 +91,6 @@ int __init mx1_clocks_init(unsigned long fref)
clk_register_clkdev(clk[dma_gate], "ahb", "imx1-dma");
clk_register_clkdev(clk[hclk], "ipg", "imx1-dma");
- clk_register_clkdev(clk[csi_gate], NULL, "mx1-camera.0");
- clk_register_clkdev(clk[mma_gate], "mma", NULL);
- clk_register_clkdev(clk[usbd_gate], NULL, "imx_udc.0");
clk_register_clkdev(clk[per1], "per", "imx-gpt.0");
clk_register_clkdev(clk[hclk], "ipg", "imx-gpt.0");
clk_register_clkdev(clk[per1], "per", "imx1-uart.0");
@@ -94,20 +98,15 @@ int __init mx1_clocks_init(unsigned long fref)
clk_register_clkdev(clk[per1], "per", "imx1-uart.1");
clk_register_clkdev(clk[hclk], "ipg", "imx1-uart.1");
clk_register_clkdev(clk[per1], "per", "imx1-uart.2");
- clk_register_clkdev(clk[hclk], "ipg", "imx1-uart.2");
+ clk_register_clkdev(clk[uart3_gate], "ipg", "imx1-uart.2");
clk_register_clkdev(clk[hclk], NULL, "imx1-i2c.0");
clk_register_clkdev(clk[per2], "per", "imx1-cspi.0");
clk_register_clkdev(clk[dummy], "ipg", "imx1-cspi.0");
clk_register_clkdev(clk[per2], "per", "imx1-cspi.1");
clk_register_clkdev(clk[dummy], "ipg", "imx1-cspi.1");
- clk_register_clkdev(clk[per2], NULL, "imx-mmc.0");
clk_register_clkdev(clk[per2], "per", "imx1-fb.0");
clk_register_clkdev(clk[dummy], "ipg", "imx1-fb.0");
clk_register_clkdev(clk[dummy], "ahb", "imx1-fb.0");
- clk_register_clkdev(clk[hclk], "mshc", NULL);
- clk_register_clkdev(clk[per3], "ssi", NULL);
- clk_register_clkdev(clk[clk32], NULL, "imx1-rtc.0");
- clk_register_clkdev(clk[clko], "clko", NULL);
mxc_timer_init(MX1_IO_ADDRESS(MX1_TIM1_BASE_ADDR), MX1_TIM1_INT);
diff --git a/arch/arm/mach-imx/clk-imx25.c b/arch/arm/mach-imx/clk-imx25.c
index dc36e6c2f1da..ae578c096ad8 100644
--- a/arch/arm/mach-imx/clk-imx25.c
+++ b/arch/arm/mach-imx/clk-imx25.c
@@ -62,6 +62,10 @@ static struct clk_onecell_data clk_data;
static const char *cpu_sel_clks[] = { "mpll", "mpll_cpu_3_4", };
static const char *per_sel_clks[] = { "ahb", "upll", };
+static const char *cko_sel_clks[] = { "dummy", "osc", "cpu", "ahb",
+ "ipg", "dummy", "dummy", "dummy",
+ "dummy", "dummy", "per0", "per2",
+ "per13", "per14", "usbotg_ahb", "dummy",};
enum mx25_clks {
dummy, osc, mpll, upll, mpll_cpu_3_4, cpu_sel, cpu, ahb, usb_div, ipg,
@@ -82,7 +86,7 @@ enum mx25_clks {
pwm2_ipg, pwm3_ipg, pwm4_ipg, rngb_ipg, reserved16, scc_ipg, sdma_ipg,
sim1_ipg, sim2_ipg, slcdc_ipg, spba_ipg, ssi1_ipg, ssi2_ipg, tsc_ipg,
uart1_ipg, uart2_ipg, uart3_ipg, uart4_ipg, uart5_ipg, reserved17,
- wdt_ipg, clk_max
+ wdt_ipg, cko_div, cko_sel, cko, clk_max
};
static struct clk *clk[clk_max];
@@ -117,6 +121,9 @@ static int __init __mx25_clocks_init(unsigned long osc_rate)
clk[per13_sel] = imx_clk_mux("per13_sel", ccm(CCM_MCR), 13, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
clk[per14_sel] = imx_clk_mux("per14_sel", ccm(CCM_MCR), 14, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
clk[per15_sel] = imx_clk_mux("per15_sel", ccm(CCM_MCR), 15, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
+ clk[cko_div] = imx_clk_divider("cko_div", "cko_sel", ccm(CCM_MCR), 24, 6);
+ clk[cko_sel] = imx_clk_mux("cko_sel", ccm(CCM_MCR), 20, 4, cko_sel_clks, ARRAY_SIZE(cko_sel_clks));
+ clk[cko] = imx_clk_gate("cko", "cko_div", ccm(CCM_MCR), 30);
clk[per0] = imx_clk_divider("per0", "per0_sel", ccm(CCM_PCDR0), 0, 6);
clk[per1] = imx_clk_divider("per1", "per1_sel", ccm(CCM_PCDR0), 8, 6);
clk[per2] = imx_clk_divider("per2", "per2_sel", ccm(CCM_PCDR0), 16, 6);
@@ -230,6 +237,12 @@ static int __init __mx25_clocks_init(unsigned long osc_rate)
clk_register_clkdev(clk[ipg], "ipg", "imx-gpt.0");
clk_register_clkdev(clk[gpt_ipg_per], "per", "imx-gpt.0");
+ /*
+ * Let's initially set up CLKO parent as ipg, since this configuration
+ * is used on some imx25 board designs to clock the audio codec.
+ */
+ clk_set_parent(clk[cko_sel], clk[ipg]);
+
return 0;
}
@@ -304,8 +317,6 @@ int __init mx25_clocks_init(void)
int __init mx25_clocks_init_dt(void)
{
struct device_node *np;
- void __iomem *base;
- int irq;
unsigned long osc_rate = 24000000;
/* retrieve the freqency of fixed clocks from device tree */
@@ -325,12 +336,7 @@ int __init mx25_clocks_init_dt(void)
__mx25_clocks_init(osc_rate);
- np = of_find_compatible_node(NULL, NULL, "fsl,imx25-gpt");
- base = of_iomap(np, 0);
- WARN_ON(!base);
- irq = irq_of_parse_and_map(np, 0);
-
- mxc_timer_init(base, irq);
+ mxc_timer_init_dt(of_find_compatible_node(NULL, NULL, "fsl,imx25-gpt"));
return 0;
}
diff --git a/arch/arm/mach-imx/clk-imx27.c b/arch/arm/mach-imx/clk-imx27.c
index d2da8908b268..317a662626d6 100644
--- a/arch/arm/mach-imx/clk-imx27.c
+++ b/arch/arm/mach-imx/clk-imx27.c
@@ -82,7 +82,8 @@ enum mx27_clks {
csi_ahb_gate, brom_ahb_gate, ata_ahb_gate, wdog_ipg_gate, usb_ipg_gate,
uart6_ipg_gate, uart5_ipg_gate, uart4_ipg_gate, uart3_ipg_gate,
uart2_ipg_gate, uart1_ipg_gate, ckih_div1p5, fpm, mpll_osc_sel,
- mpll_sel, spll_gate, clk_max
+ mpll_sel, spll_gate, mshc_div, rtic_ipg_gate, mshc_ipg_gate,
+ rtic_ahb_gate, mshc_baud_gate, clk_max
};
static struct clk *clk[clk_max];
@@ -117,6 +118,7 @@ int __init mx27_clocks_init(unsigned long fref)
clk[ipg] = imx_clk_divider("ipg", "ahb", CCM_CSCR, 8, 1);
}
+ clk[mshc_div] = imx_clk_divider("mshc_div", "ahb", CCM_PCDR0, 0, 6);
clk[nfc_div] = imx_clk_divider("nfc_div", "ahb", CCM_PCDR0, 6, 4);
clk[per1_div] = imx_clk_divider("per1_div", "mpll_main2", CCM_PCDR1, 0, 6);
clk[per2_div] = imx_clk_divider("per2_div", "mpll_main2", CCM_PCDR1, 8, 6);
@@ -145,9 +147,11 @@ int __init mx27_clocks_init(unsigned long fref)
clk[sdhc1_ipg_gate] = imx_clk_gate("sdhc1_ipg_gate", "ipg", CCM_PCCR0, 5);
clk[scc_ipg_gate] = imx_clk_gate("scc_ipg_gate", "ipg", CCM_PCCR0, 6);
clk[sahara_ipg_gate] = imx_clk_gate("sahara_ipg_gate", "ipg", CCM_PCCR0, 7);
+ clk[rtic_ipg_gate] = imx_clk_gate("rtic_ipg_gate", "ipg", CCM_PCCR0, 8);
clk[rtc_ipg_gate] = imx_clk_gate("rtc_ipg_gate", "ipg", CCM_PCCR0, 9);
clk[pwm_ipg_gate] = imx_clk_gate("pwm_ipg_gate", "ipg", CCM_PCCR0, 11);
clk[owire_ipg_gate] = imx_clk_gate("owire_ipg_gate", "ipg", CCM_PCCR0, 12);
+ clk[mshc_ipg_gate] = imx_clk_gate("mshc_ipg_gate", "ipg", CCM_PCCR0, 13);
clk[lcdc_ipg_gate] = imx_clk_gate("lcdc_ipg_gate", "ipg", CCM_PCCR0, 14);
clk[kpp_ipg_gate] = imx_clk_gate("kpp_ipg_gate", "ipg", CCM_PCCR0, 15);
clk[iim_ipg_gate] = imx_clk_gate("iim_ipg_gate", "ipg", CCM_PCCR0, 16);
@@ -166,6 +170,7 @@ int __init mx27_clocks_init(unsigned long fref)
clk[cspi3_ipg_gate] = imx_clk_gate("cspi3_ipg_gate", "ipg", CCM_PCCR0, 29);
clk[cspi2_ipg_gate] = imx_clk_gate("cspi2_ipg_gate", "ipg", CCM_PCCR0, 30);
clk[cspi1_ipg_gate] = imx_clk_gate("cspi1_ipg_gate", "ipg", CCM_PCCR0, 31);
+ clk[mshc_baud_gate] = imx_clk_gate("mshc_baud_gate", "mshc_div", CCM_PCCR1, 2);
clk[nfc_baud_gate] = imx_clk_gate("nfc_baud_gate", "nfc_div", CCM_PCCR1, 3);
clk[ssi2_baud_gate] = imx_clk_gate("ssi2_baud_gate", "ssi2_div", CCM_PCCR1, 4);
clk[ssi1_baud_gate] = imx_clk_gate("ssi1_baud_gate", "ssi1_div", CCM_PCCR1, 5);
@@ -177,6 +182,7 @@ int __init mx27_clocks_init(unsigned long fref)
clk[usb_ahb_gate] = imx_clk_gate("usb_ahb_gate", "ahb", CCM_PCCR1, 11);
clk[slcdc_ahb_gate] = imx_clk_gate("slcdc_ahb_gate", "ahb", CCM_PCCR1, 12);
clk[sahara_ahb_gate] = imx_clk_gate("sahara_ahb_gate", "ahb", CCM_PCCR1, 13);
+ clk[rtic_ahb_gate] = imx_clk_gate("rtic_ahb_gate", "ahb", CCM_PCCR1, 14);
clk[lcdc_ahb_gate] = imx_clk_gate("lcdc_ahb_gate", "ahb", CCM_PCCR1, 15);
clk[vpu_ahb_gate] = imx_clk_gate("vpu_ahb_gate", "ahb", CCM_PCCR1, 16);
clk[fec_ahb_gate] = imx_clk_gate("fec_ahb_gate", "ahb", CCM_PCCR1, 17);
@@ -221,16 +227,6 @@ int __init mx27_clocks_init(unsigned long fref)
clk_register_clkdev(clk[per1_gate], "per", "imx21-uart.5");
clk_register_clkdev(clk[gpt1_ipg_gate], "ipg", "imx-gpt.0");
clk_register_clkdev(clk[per1_gate], "per", "imx-gpt.0");
- clk_register_clkdev(clk[gpt2_ipg_gate], "ipg", "imx-gpt.1");
- clk_register_clkdev(clk[per1_gate], "per", "imx-gpt.1");
- clk_register_clkdev(clk[gpt3_ipg_gate], "ipg", "imx-gpt.2");
- clk_register_clkdev(clk[per1_gate], "per", "imx-gpt.2");
- clk_register_clkdev(clk[gpt4_ipg_gate], "ipg", "imx-gpt.3");
- clk_register_clkdev(clk[per1_gate], "per", "imx-gpt.3");
- clk_register_clkdev(clk[gpt5_ipg_gate], "ipg", "imx-gpt.4");
- clk_register_clkdev(clk[per1_gate], "per", "imx-gpt.4");
- clk_register_clkdev(clk[gpt6_ipg_gate], "ipg", "imx-gpt.5");
- clk_register_clkdev(clk[per1_gate], "per", "imx-gpt.5");
clk_register_clkdev(clk[per2_gate], "per", "imx21-mmc.0");
clk_register_clkdev(clk[sdhc1_ipg_gate], "ipg", "imx21-mmc.0");
clk_register_clkdev(clk[per2_gate], "per", "imx21-mmc.1");
@@ -278,14 +274,7 @@ int __init mx27_clocks_init(unsigned long fref)
clk_register_clkdev(clk[emma_ipg_gate], "emma-ipg", "imx27-camera.0");
clk_register_clkdev(clk[emma_ahb_gate], "ahb", "m2m-emmaprp.0");
clk_register_clkdev(clk[emma_ipg_gate], "ipg", "m2m-emmaprp.0");
- clk_register_clkdev(clk[iim_ipg_gate], "iim", NULL);
- clk_register_clkdev(clk[gpio_ipg_gate], "gpio", NULL);
- clk_register_clkdev(clk[brom_ahb_gate], "brom", NULL);
- clk_register_clkdev(clk[ata_ahb_gate], "ata", NULL);
- clk_register_clkdev(clk[rtc_ipg_gate], NULL, "imx21-rtc");
- clk_register_clkdev(clk[scc_ipg_gate], "scc", NULL);
clk_register_clkdev(clk[cpu_div], NULL, "cpu0");
- clk_register_clkdev(clk[emi_ahb_gate], "emi_ahb" , NULL);
mxc_timer_init(MX27_IO_ADDRESS(MX27_GPT1_BASE_ADDR), MX27_INT_GPT1);
@@ -296,7 +285,6 @@ int __init mx27_clocks_init(unsigned long fref)
return 0;
}
-#ifdef CONFIG_OF
int __init mx27_clocks_init_dt(void)
{
struct device_node *np;
@@ -312,4 +300,3 @@ int __init mx27_clocks_init_dt(void)
return mx27_clocks_init(fref);
}
-#endif
diff --git a/arch/arm/mach-imx/clk-imx31.c b/arch/arm/mach-imx/clk-imx31.c
index b5b65f3efaf1..4a9de0835eb1 100644
--- a/arch/arm/mach-imx/clk-imx31.c
+++ b/arch/arm/mach-imx/clk-imx31.c
@@ -191,7 +191,6 @@ int __init mx31_clocks_init(unsigned long fref)
return 0;
}
-#ifdef CONFIG_OF
int __init mx31_clocks_init_dt(void)
{
struct device_node *np;
@@ -207,4 +206,3 @@ int __init mx31_clocks_init_dt(void)
return mx31_clocks_init(fref);
}
-#endif
diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c
index 568ef0a4de84..21d2b111c83d 100644
--- a/arch/arm/mach-imx/clk-imx51-imx53.c
+++ b/arch/arm/mach-imx/clk-imx51-imx53.c
@@ -322,9 +322,8 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil,
static void __init mx50_clocks_init(struct device_node *np)
{
- void __iomem *base;
unsigned long r;
- int i, irq;
+ int i;
clk[IMX5_CLK_PLL1_SW] = imx_clk_pllv2("pll1_sw", "osc", MX53_DPLL1_BASE);
clk[IMX5_CLK_PLL2_SW] = imx_clk_pllv2("pll2_sw", "osc", MX53_DPLL2_BASE);
@@ -372,11 +371,7 @@ static void __init mx50_clocks_init(struct device_node *np)
r = clk_round_rate(clk[IMX5_CLK_USBOH3_PER_GATE], 54000000);
clk_set_rate(clk[IMX5_CLK_USBOH3_PER_GATE], r);
- np = of_find_compatible_node(NULL, NULL, "fsl,imx50-gpt");
- base = of_iomap(np, 0);
- WARN_ON(!base);
- irq = irq_of_parse_and_map(np, 0);
- mxc_timer_init(base, irq);
+ mxc_timer_init_dt(of_find_compatible_node(NULL, NULL, "fsl,imx50-gpt"));
}
CLK_OF_DECLARE(imx50_ccm, "fsl,imx50-ccm", mx50_clocks_init);
@@ -436,7 +431,6 @@ int __init mx51_clocks_init(unsigned long rate_ckil, unsigned long rate_osc,
clk_register_clkdev(clk[IMX5_CLK_HSI2C_GATE], NULL, "imx21-i2c.2");
clk_register_clkdev(clk[IMX5_CLK_MX51_MIPI], "mipi_hsp", NULL);
- clk_register_clkdev(clk[IMX5_CLK_VPU_GATE], NULL, "imx51-vpu.0");
clk_register_clkdev(clk[IMX5_CLK_FEC_GATE], NULL, "imx27-fec.0");
clk_register_clkdev(clk[IMX5_CLK_USB_PHY_GATE], "phy", "mxc-ehci.0");
clk_register_clkdev(clk[IMX5_CLK_ESDHC1_IPG_GATE], "ipg", "sdhci-esdhc-imx51.0");
@@ -492,9 +486,8 @@ CLK_OF_DECLARE(imx51_ccm, "fsl,imx51-ccm", mx51_clocks_init_dt);
static void __init mx53_clocks_init(struct device_node *np)
{
- int i, irq;
+ int i;
unsigned long r;
- void __iomem *base;
clk[IMX5_CLK_PLL1_SW] = imx_clk_pllv2("pll1_sw", "osc", MX53_DPLL1_BASE);
clk[IMX5_CLK_PLL2_SW] = imx_clk_pllv2("pll2_sw", "osc", MX53_DPLL2_BASE);
@@ -561,7 +554,6 @@ static void __init mx53_clocks_init(struct device_node *np)
mx5_clocks_common_init(0, 0, 0, 0);
- clk_register_clkdev(clk[IMX5_CLK_VPU_GATE], NULL, "imx53-vpu.0");
clk_register_clkdev(clk[IMX5_CLK_I2C3_GATE], NULL, "imx21-i2c.2");
clk_register_clkdev(clk[IMX5_CLK_FEC_GATE], NULL, "imx25-fec.0");
clk_register_clkdev(clk[IMX5_CLK_USB_PHY1_GATE], "usb_phy1", "mxc-ehci.0");
@@ -592,10 +584,6 @@ static void __init mx53_clocks_init(struct device_node *np)
r = clk_round_rate(clk[IMX5_CLK_USBOH3_PER_GATE], 54000000);
clk_set_rate(clk[IMX5_CLK_USBOH3_PER_GATE], r);
- np = of_find_compatible_node(NULL, NULL, "fsl,imx53-gpt");
- base = of_iomap(np, 0);
- WARN_ON(!base);
- irq = irq_of_parse_and_map(np, 0);
- mxc_timer_init(base, irq);
+ mxc_timer_init_dt(of_find_compatible_node(NULL, NULL, "fsl,imx53-gpt"));
}
CLK_OF_DECLARE(imx53_ccm, "fsl,imx53-ccm", mx53_clocks_init);
diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
index 2b4d6acfa34a..8e795dea02ec 100644
--- a/arch/arm/mach-imx/clk-imx6q.c
+++ b/arch/arm/mach-imx/clk-imx6q.c
@@ -107,7 +107,7 @@ enum mx6q_clks {
sata_ref, sata_ref_100m, pcie_ref, pcie_ref_125m, enet_ref, usbphy1_gate,
usbphy2_gate, pll4_post_div, pll5_post_div, pll5_video_div, eim_slow,
spdif, cko2_sel, cko2_podf, cko2, cko, vdoa, pll4_audio_div,
- lvds1_sel, lvds2_sel, lvds1_gate, lvds2_gate, clk_max
+ lvds1_sel, lvds2_sel, lvds1_gate, lvds2_gate, esai_ahb, clk_max
};
static struct clk *clk[clk_max];
@@ -140,11 +140,13 @@ static struct clk_div_table video_div_table[] = {
{ /* sentinel */ }
};
+static unsigned int share_count_esai;
+
static void __init imx6q_clocks_init(struct device_node *ccm_node)
{
struct device_node *np;
void __iomem *base;
- int i, irq;
+ int i;
int ret;
clk[dummy] = imx_clk_fixed("dummy", 0);
@@ -352,9 +354,14 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
clk[ecspi2] = imx_clk_gate2("ecspi2", "ecspi_root", base + 0x6c, 2);
clk[ecspi3] = imx_clk_gate2("ecspi3", "ecspi_root", base + 0x6c, 4);
clk[ecspi4] = imx_clk_gate2("ecspi4", "ecspi_root", base + 0x6c, 6);
- clk[ecspi5] = imx_clk_gate2("ecspi5", "ecspi_root", base + 0x6c, 8);
+ if (cpu_is_imx6dl())
+ /* ecspi5 is replaced with i2c4 on imx6dl & imx6s */
+ clk[ecspi5] = imx_clk_gate2("i2c4", "ipg_per", base + 0x6c, 8);
+ else
+ clk[ecspi5] = imx_clk_gate2("ecspi5", "ecspi_root", base + 0x6c, 8);
clk[enet] = imx_clk_gate2("enet", "ipg", base + 0x6c, 10);
- clk[esai] = imx_clk_gate2("esai", "esai_podf", base + 0x6c, 16);
+ clk[esai] = imx_clk_gate2_shared("esai", "esai_podf", base + 0x6c, 16, &share_count_esai);
+ clk[esai_ahb] = imx_clk_gate2_shared("esai_ahb", "ahb", base + 0x6c, 16, &share_count_esai);
clk[gpt_ipg] = imx_clk_gate2("gpt_ipg", "ipg", base + 0x6c, 20);
clk[gpt_ipg_per] = imx_clk_gate2("gpt_ipg_per", "ipg_per", base + 0x6c, 22);
if (cpu_is_imx6dl())
@@ -489,10 +496,6 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
/* Set initial power mode */
imx6q_set_lpm(WAIT_CLOCKED);
- np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpt");
- base = of_iomap(np, 0);
- WARN_ON(!base);
- irq = irq_of_parse_and_map(np, 0);
- mxc_timer_init(base, irq);
+ mxc_timer_init_dt(of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpt"));
}
CLK_OF_DECLARE(imx6q, "fsl,imx6q-ccm", imx6q_clocks_init);
diff --git a/arch/arm/mach-imx/clk-imx6sl.c b/arch/arm/mach-imx/clk-imx6sl.c
index f7073c0782fb..21cf06cebade 100644
--- a/arch/arm/mach-imx/clk-imx6sl.c
+++ b/arch/arm/mach-imx/clk-imx6sl.c
@@ -169,7 +169,6 @@ static void __init imx6sl_clocks_init(struct device_node *ccm_node)
{
struct device_node *np;
void __iomem *base;
- int irq;
int i;
int ret;
@@ -385,9 +384,6 @@ static void __init imx6sl_clocks_init(struct device_node *ccm_node)
imx6q_set_lpm(WAIT_CLOCKED);
np = of_find_compatible_node(NULL, NULL, "fsl,imx6sl-gpt");
- base = of_iomap(np, 0);
- WARN_ON(!base);
- irq = irq_of_parse_and_map(np, 0);
- mxc_timer_init(base, irq);
+ mxc_timer_init_dt(np);
}
CLK_OF_DECLARE(imx6sl, "fsl,imx6sl-ccm", imx6sl_clocks_init);
diff --git a/arch/arm/mach-imx/clk-imx6sx.c b/arch/arm/mach-imx/clk-imx6sx.c
new file mode 100644
index 000000000000..72f8902235d1
--- /dev/null
+++ b/arch/arm/mach-imx/clk-imx6sx.c
@@ -0,0 +1,524 @@
+/*
+ * Copyright (C) 2014 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <dt-bindings/clock/imx6sx-clock.h>
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/types.h>
+
+#include "clk.h"
+#include "common.h"
+
+#define CCDR 0x4
+#define BM_CCM_CCDR_MMDC_CH0_MASK (0x2 << 16)
+
+static const char *step_sels[] = { "osc", "pll2_pfd2_396m", };
+static const char *pll1_sw_sels[] = { "pll1_sys", "step", };
+static const char *periph_pre_sels[] = { "pll2_bus", "pll2_pfd2_396m", "pll2_pfd0_352m", "pll2_198m", };
+static const char *periph2_pre_sels[] = { "pll2_bus", "pll2_pfd2_396m", "pll2_pfd0_352m", "pll4_audio_div", };
+static const char *periph_clk2_sels[] = { "pll3_usb_otg", "osc", "osc", };
+static const char *periph2_clk2_sels[] = { "pll3_usb_otg", "osc", };
+static const char *periph_sels[] = { "periph_pre", "periph_clk2", };
+static const char *periph2_sels[] = { "periph2_pre", "periph2_clk2", };
+static const char *ocram_sels[] = { "periph", "pll2_pfd2_396m", "periph", "pll3_pfd1_540m", };
+static const char *audio_sels[] = { "pll4_audio_div", "pll3_pfd2_508m", "pll5_video_div", "pll3_usb_otg", };
+static const char *gpu_axi_sels[] = { "pll2_pfd2_396m", "pll3_pfd0_720m", "pll3_pfd1_540m", "pll2_bus", };
+static const char *gpu_core_sels[] = { "pll3_pfd1_540m", "pll3_pfd0_720m", "pll2_bus", "pll2_pfd2_396m", };
+static const char *ldb_di0_div_sels[] = { "ldb_di0_div_3_5", "ldb_di0_div_7", };
+static const char *ldb_di1_div_sels[] = { "ldb_di1_div_3_5", "ldb_di1_div_7", };
+static const char *ldb_di0_sels[] = { "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll2_pfd3_594m", "pll2_pfd1_594m", "pll3_pfd3_454m", };
+static const char *ldb_di1_sels[] = { "pll3_usb_otg", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll2_bus", "pll3_pfd3_454m", "pll3_pfd2_508m", };
+static const char *pcie_axi_sels[] = { "axi", "ahb", };
+static const char *ssi_sels[] = { "pll3_pfd2_508m", "pll5_video_div", "pll4_audio_div", };
+static const char *qspi1_sels[] = { "pll3_usb_otg", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll2_bus", "pll3_pfd3_454m", "pll3_pfd2_508m", };
+static const char *perclk_sels[] = { "ipg", "osc", };
+static const char *usdhc_sels[] = { "pll2_pfd2_396m", "pll2_pfd0_352m", };
+static const char *vid_sels[] = { "pll3_pfd1_540m", "pll3_usb_otg", "pll3_pfd3_454m", "pll4_audio_div", "pll5_video_div", };
+static const char *can_sels[] = { "pll3_60m", "osc", "pll3_80m", "dummy", };
+static const char *uart_sels[] = { "pll3_80m", "osc", };
+static const char *qspi2_sels[] = { "pll2_pfd0_352m", "pll2_bus", "pll3_usb_otg", "pll2_pfd2_396m", "pll3_pfd3_454m", "dummy", "dummy", "dummy", };
+static const char *enet_pre_sels[] = { "pll2_bus", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll3_pfd2_508m", };
+static const char *enet_sels[] = { "enet_podf", "ipp_di0", "ipp_di1", "ldb_di0", "ldb_di1", };
+static const char *m4_pre_sels[] = { "pll2_bus", "pll3_usb_otg", "osc", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll3_pfd3_454m", };
+static const char *m4_sels[] = { "m4_pre_sel", "ipp_di0", "ipp_di1", "ldb_di0", "ldb_di1", };
+static const char *eim_slow_sels[] = { "ocram", "pll3_usb_otg", "pll2_pfd2_396m", "pll2_pfd0_352m", };
+static const char *ecspi_sels[] = { "pll3_60m", "osc", };
+static const char *lcdif1_pre_sels[] = { "pll2_bus", "pll3_pfd3_454m", "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd1_594m", "pll3_pfd1_540m", };
+static const char *lcdif1_sels[] = { "lcdif1_podf", "ipp_di0", "ipp_di1", "ldb_di0", "ldb_di1", };
+static const char *lcdif2_pre_sels[] = { "pll2_bus", "pll3_pfd3_454m", "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd3_594m", "pll3_pfd1_540m", };
+static const char *lcdif2_sels[] = { "lcdif2_podf", "ipp_di0", "ipp_di1", "ldb_di0", "ldb_di1", };
+static const char *display_sels[] = { "pll2_bus", "pll2_pfd2_396m", "pll3_usb_otg", "pll3_pfd1_540m", };
+static const char *csi_sels[] = { "osc", "pll2_pfd2_396m", "pll3_120m", "pll3_pfd1_540m", };
+static const char *cko1_sels[] = {
+ "pll3_usb_otg", "pll2_bus", "pll1_sys", "pll5_video_div",
+ "dummy", "ocram", "dummy", "pxp_axi", "epdc_axi", "lcdif_pix",
+ "epdc_pix", "ahb", "ipg", "perclk", "ckil", "pll4_audio_div",
+};
+static const char *cko2_sels[] = {
+ "dummy", "mmdc_p0_fast", "usdhc4", "usdhc1", "dummy", "wrck",
+ "ecspi_root", "dummy", "usdhc3", "pcie", "arm", "csi_core",
+ "lcdif_axi", "dummy", "osc", "dummy", "gpu2d_ovg_core",
+ "usdhc2", "ssi1", "ssi2", "ssi3", "gpu2d_core", "dummy",
+ "dummy", "dummy", "dummy", "esai_extal", "eim_slow", "uart_serial",
+ "spdif", "asrc", "dummy",
+};
+static const char *cko_sels[] = { "cko1", "cko2", };
+static const char *lvds_sels[] = {
+ "arm", "pll1_sys", "dummy", "dummy", "dummy", "dummy", "dummy", "pll5_video_div",
+ "dummy", "dummy", "pcie_ref_125m", "dummy", "usbphy1", "usbphy2",
+};
+
+static struct clk *clks[IMX6SX_CLK_CLK_END];
+static struct clk_onecell_data clk_data;
+
+static int const clks_init_on[] __initconst = {
+ IMX6SX_CLK_AIPS_TZ1, IMX6SX_CLK_AIPS_TZ2, IMX6SX_CLK_AIPS_TZ3,
+ IMX6SX_CLK_IPMUX1, IMX6SX_CLK_IPMUX2, IMX6SX_CLK_IPMUX3,
+ IMX6SX_CLK_WAKEUP, IMX6SX_CLK_MMDC_P0_FAST, IMX6SX_CLK_MMDC_P0_IPG,
+ IMX6SX_CLK_ROM, IMX6SX_CLK_ARM, IMX6SX_CLK_IPG, IMX6SX_CLK_OCRAM,
+ IMX6SX_CLK_PER2_MAIN, IMX6SX_CLK_PERCLK, IMX6SX_CLK_M4,
+ IMX6SX_CLK_QSPI1, IMX6SX_CLK_QSPI2, IMX6SX_CLK_UART_IPG,
+ IMX6SX_CLK_UART_SERIAL, IMX6SX_CLK_I2C3, IMX6SX_CLK_ECSPI5,
+ IMX6SX_CLK_CAN1_IPG, IMX6SX_CLK_CAN1_SERIAL, IMX6SX_CLK_CAN2_IPG,
+ IMX6SX_CLK_CAN2_SERIAL, IMX6SX_CLK_CANFD, IMX6SX_CLK_EPIT1,
+ IMX6SX_CLK_EPIT2,
+};
+
+static struct clk_div_table clk_enet_ref_table[] = {
+ { .val = 0, .div = 20, },
+ { .val = 1, .div = 10, },
+ { .val = 2, .div = 5, },
+ { .val = 3, .div = 4, },
+ { }
+};
+
+static struct clk_div_table post_div_table[] = {
+ { .val = 2, .div = 1, },
+ { .val = 1, .div = 2, },
+ { .val = 0, .div = 4, },
+ { }
+};
+
+static struct clk_div_table video_div_table[] = {
+ { .val = 0, .div = 1, },
+ { .val = 1, .div = 2, },
+ { .val = 2, .div = 1, },
+ { .val = 3, .div = 4, },
+ { }
+};
+
+static u32 share_count_asrc;
+static u32 share_count_audio;
+static u32 share_count_esai;
+
+static void __init imx6sx_clocks_init(struct device_node *ccm_node)
+{
+ struct device_node *np;
+ void __iomem *base;
+ int i;
+
+ clks[IMX6SX_CLK_DUMMY] = imx_clk_fixed("dummy", 0);
+
+ clks[IMX6SX_CLK_CKIL] = of_clk_get_by_name(ccm_node, "ckil");
+ clks[IMX6SX_CLK_OSC] = of_clk_get_by_name(ccm_node, "osc");
+
+ /* ipp_di clock is external input */
+ clks[IMX6SX_CLK_IPP_DI0] = of_clk_get_by_name(ccm_node, "ipp_di0");
+ clks[IMX6SX_CLK_IPP_DI1] = of_clk_get_by_name(ccm_node, "ipp_di1");
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,imx6sx-anatop");
+ base = of_iomap(np, 0);
+ WARN_ON(!base);
+
+ /* type name parent_name base div_mask */
+ clks[IMX6SX_CLK_PLL1_SYS] = imx_clk_pllv3(IMX_PLLV3_SYS, "pll1_sys", "osc", base, 0x7f);
+ clks[IMX6SX_CLK_PLL2_BUS] = imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll2_bus", "osc", base + 0x30, 0x1);
+ clks[IMX6SX_CLK_PLL3_USB_OTG] = imx_clk_pllv3(IMX_PLLV3_USB, "pll3_usb_otg", "osc", base + 0x10, 0x3);
+ clks[IMX6SX_CLK_PLL4_AUDIO] = imx_clk_pllv3(IMX_PLLV3_AV, "pll4_audio", "osc", base + 0x70, 0x7f);
+ clks[IMX6SX_CLK_PLL5_VIDEO] = imx_clk_pllv3(IMX_PLLV3_AV, "pll5_video", "osc", base + 0xa0, 0x7f);
+ clks[IMX6SX_CLK_PLL6_ENET] = imx_clk_pllv3(IMX_PLLV3_ENET, "pll6_enet", "osc", base + 0xe0, 0x3);
+ clks[IMX6SX_CLK_PLL7_USB_HOST] = imx_clk_pllv3(IMX_PLLV3_USB, "pll7_usb_host", "osc", base + 0x20, 0x3);
+
+ /*
+ * Bit 20 is the reserved and read-only bit, we do this only for:
+ * - Do nothing for usbphy clk_enable/disable
+ * - Keep refcount when do usbphy clk_enable/disable, in that case,
+ * the clk framework may need to enable/disable usbphy's parent
+ */
+ clks[IMX6SX_CLK_USBPHY1] = imx_clk_gate("usbphy1", "pll3_usb_otg", base + 0x10, 20);
+ clks[IMX6SX_CLK_USBPHY2] = imx_clk_gate("usbphy2", "pll7_usb_host", base + 0x20, 20);
+
+ /*
+ * usbphy*_gate needs to be on after system boots up, and software
+ * never needs to control it anymore.
+ */
+ clks[IMX6SX_CLK_USBPHY1_GATE] = imx_clk_gate("usbphy1_gate", "dummy", base + 0x10, 6);
+ clks[IMX6SX_CLK_USBPHY2_GATE] = imx_clk_gate("usbphy2_gate", "dummy", base + 0x20, 6);
+
+ /* FIXME 100Mhz is used for pcie ref for all imx6 pcie, excepted imx6q */
+ clks[IMX6SX_CLK_PCIE_REF] = imx_clk_fixed_factor("pcie_ref", "pll6_enet", 1, 5);
+ clks[IMX6SX_CLK_PCIE_REF_125M] = imx_clk_gate("pcie_ref_125m", "pcie_ref", base + 0xe0, 19);
+
+ clks[IMX6SX_CLK_LVDS1_OUT] = imx_clk_gate("lvds1_out", "lvds1_sel", base + 0x160, 10);
+
+ clks[IMX6SX_CLK_ENET_REF] = clk_register_divider_table(NULL, "enet_ref", "pll6_enet", 0,
+ base + 0xe0, 0, 2, 0, clk_enet_ref_table,
+ &imx_ccm_lock);
+ clks[IMX6SX_CLK_ENET2_REF] = clk_register_divider_table(NULL, "enet2_ref", "pll6_enet", 0,
+ base + 0xe0, 2, 2, 0, clk_enet_ref_table,
+ &imx_ccm_lock);
+ clks[IMX6SX_CLK_ENET2_REF_125M] = imx_clk_gate("enet2_ref_125m", "enet2_ref", base + 0xe0, 20);
+
+ clks[IMX6SX_CLK_ENET_PTP_REF] = imx_clk_fixed_factor("enet_ptp_ref", "pll6_enet", 1, 20);
+ clks[IMX6SX_CLK_ENET_PTP] = imx_clk_gate("enet_ptp_25m", "enet_ptp_ref", base + 0xe0, 21);
+
+ /* name parent_name reg idx */
+ clks[IMX6SX_CLK_PLL2_PFD0] = imx_clk_pfd("pll2_pfd0_352m", "pll2_bus", base + 0x100, 0);
+ clks[IMX6SX_CLK_PLL2_PFD1] = imx_clk_pfd("pll2_pfd1_594m", "pll2_bus", base + 0x100, 1);
+ clks[IMX6SX_CLK_PLL2_PFD2] = imx_clk_pfd("pll2_pfd2_396m", "pll2_bus", base + 0x100, 2);
+ clks[IMX6SX_CLK_PLL2_PFD3] = imx_clk_pfd("pll2_pfd3_594m", "pll2_bus", base + 0x100, 3);
+ clks[IMX6SX_CLK_PLL3_PFD0] = imx_clk_pfd("pll3_pfd0_720m", "pll3_usb_otg", base + 0xf0, 0);
+ clks[IMX6SX_CLK_PLL3_PFD1] = imx_clk_pfd("pll3_pfd1_540m", "pll3_usb_otg", base + 0xf0, 1);
+ clks[IMX6SX_CLK_PLL3_PFD2] = imx_clk_pfd("pll3_pfd2_508m", "pll3_usb_otg", base + 0xf0, 2);
+ clks[IMX6SX_CLK_PLL3_PFD3] = imx_clk_pfd("pll3_pfd3_454m", "pll3_usb_otg", base + 0xf0, 3);
+
+ /* name parent_name mult div */
+ clks[IMX6SX_CLK_PLL2_198M] = imx_clk_fixed_factor("pll2_198m", "pll2_pfd2_396m", 1, 2);
+ clks[IMX6SX_CLK_PLL3_120M] = imx_clk_fixed_factor("pll3_120m", "pll3_usb_otg", 1, 4);
+ clks[IMX6SX_CLK_PLL3_80M] = imx_clk_fixed_factor("pll3_80m", "pll3_usb_otg", 1, 6);
+ clks[IMX6SX_CLK_PLL3_60M] = imx_clk_fixed_factor("pll3_60m", "pll3_usb_otg", 1, 8);
+ clks[IMX6SX_CLK_TWD] = imx_clk_fixed_factor("twd", "arm", 1, 2);
+ clks[IMX6SX_CLK_GPT_3M] = imx_clk_fixed_factor("gpt_3m", "osc", 1, 8);
+
+ clks[IMX6SX_CLK_PLL4_POST_DIV] = clk_register_divider_table(NULL, "pll4_post_div", "pll4_audio",
+ CLK_SET_RATE_PARENT, base + 0x70, 19, 2, 0, post_div_table, &imx_ccm_lock);
+ clks[IMX6SX_CLK_PLL4_AUDIO_DIV] = clk_register_divider(NULL, "pll4_audio_div", "pll4_post_div",
+ CLK_SET_RATE_PARENT, base + 0x170, 15, 1, 0, &imx_ccm_lock);
+ clks[IMX6SX_CLK_PLL5_POST_DIV] = clk_register_divider_table(NULL, "pll5_post_div", "pll5_video",
+ CLK_SET_RATE_PARENT, base + 0xa0, 19, 2, 0, post_div_table, &imx_ccm_lock);
+ clks[IMX6SX_CLK_PLL5_VIDEO_DIV] = clk_register_divider_table(NULL, "pll5_video_div", "pll5_post_div",
+ CLK_SET_RATE_PARENT, base + 0x170, 30, 2, 0, video_div_table, &imx_ccm_lock);
+
+ /* name reg shift width parent_names num_parents */
+ clks[IMX6SX_CLK_LVDS1_SEL] = imx_clk_mux("lvds1_sel", base + 0x160, 0, 5, lvds_sels, ARRAY_SIZE(lvds_sels));
+
+ np = ccm_node;
+ base = of_iomap(np, 0);
+ WARN_ON(!base);
+
+ imx6q_pm_set_ccm_base(base);
+
+ /* name reg shift width parent_names num_parents */
+ clks[IMX6SX_CLK_STEP] = imx_clk_mux("step", base + 0xc, 8, 1, step_sels, ARRAY_SIZE(step_sels));
+ clks[IMX6SX_CLK_PLL1_SW] = imx_clk_mux("pll1_sw", base + 0xc, 2, 1, pll1_sw_sels, ARRAY_SIZE(pll1_sw_sels));
+ clks[IMX6SX_CLK_OCRAM_SEL] = imx_clk_mux("ocram_sel", base + 0x14, 6, 2, ocram_sels, ARRAY_SIZE(ocram_sels));
+ clks[IMX6SX_CLK_PERIPH_PRE] = imx_clk_mux("periph_pre", base + 0x18, 18, 2, periph_pre_sels, ARRAY_SIZE(periph_pre_sels));
+ clks[IMX6SX_CLK_PERIPH2_PRE] = imx_clk_mux("periph2_pre", base + 0x18, 21, 2, periph2_pre_sels, ARRAY_SIZE(periph2_pre_sels));
+ clks[IMX6SX_CLK_PERIPH_CLK2_SEL] = imx_clk_mux("periph_clk2_sel", base + 0x18, 12, 2, periph_clk2_sels, ARRAY_SIZE(periph_clk2_sels));
+ clks[IMX6SX_CLK_PERIPH2_CLK2_SEL] = imx_clk_mux("periph2_clk2_sel", base + 0x18, 20, 1, periph2_clk2_sels, ARRAY_SIZE(periph2_clk2_sels));
+ clks[IMX6SX_CLK_PCIE_AXI_SEL] = imx_clk_mux("pcie_axi_sel", base + 0x18, 10, 1, pcie_axi_sels, ARRAY_SIZE(pcie_axi_sels));
+ clks[IMX6SX_CLK_GPU_AXI_SEL] = imx_clk_mux("gpu_axi_sel", base + 0x18, 8, 2, gpu_axi_sels, ARRAY_SIZE(gpu_axi_sels));
+ clks[IMX6SX_CLK_GPU_CORE_SEL] = imx_clk_mux("gpu_core_sel", base + 0x18, 4, 2, gpu_core_sels, ARRAY_SIZE(gpu_core_sels));
+ clks[IMX6SX_CLK_EIM_SLOW_SEL] = imx_clk_mux("eim_slow_sel", base + 0x1c, 29, 2, eim_slow_sels, ARRAY_SIZE(eim_slow_sels));
+ clks[IMX6SX_CLK_USDHC1_SEL] = imx_clk_mux("usdhc1_sel", base + 0x1c, 16, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels));
+ clks[IMX6SX_CLK_USDHC2_SEL] = imx_clk_mux("usdhc2_sel", base + 0x1c, 17, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels));
+ clks[IMX6SX_CLK_USDHC3_SEL] = imx_clk_mux("usdhc3_sel", base + 0x1c, 18, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels));
+ clks[IMX6SX_CLK_USDHC4_SEL] = imx_clk_mux("usdhc4_sel", base + 0x1c, 19, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels));
+ clks[IMX6SX_CLK_SSI3_SEL] = imx_clk_mux("ssi3_sel", base + 0x1c, 14, 2, ssi_sels, ARRAY_SIZE(ssi_sels));
+ clks[IMX6SX_CLK_SSI2_SEL] = imx_clk_mux("ssi2_sel", base + 0x1c, 12, 2, ssi_sels, ARRAY_SIZE(ssi_sels));
+ clks[IMX6SX_CLK_SSI1_SEL] = imx_clk_mux("ssi1_sel", base + 0x1c, 10, 2, ssi_sels, ARRAY_SIZE(ssi_sels));
+ clks[IMX6SX_CLK_QSPI1_SEL] = imx_clk_mux_flags("qspi1_sel", base + 0x1c, 7, 3, qspi1_sels, ARRAY_SIZE(qspi1_sels), CLK_SET_RATE_PARENT);
+ clks[IMX6SX_CLK_PERCLK_SEL] = imx_clk_mux("perclk_sel", base + 0x1c, 6, 1, perclk_sels, ARRAY_SIZE(perclk_sels));
+ clks[IMX6SX_CLK_VID_SEL] = imx_clk_mux("vid_sel", base + 0x20, 21, 3, vid_sels, ARRAY_SIZE(vid_sels));
+ clks[IMX6SX_CLK_ESAI_SEL] = imx_clk_mux("esai_sel", base + 0x20, 19, 2, audio_sels, ARRAY_SIZE(audio_sels));
+ clks[IMX6SX_CLK_CAN_SEL] = imx_clk_mux("can_sel", base + 0x20, 8, 2, can_sels, ARRAY_SIZE(can_sels));
+ clks[IMX6SX_CLK_UART_SEL] = imx_clk_mux("uart_sel", base + 0x24, 6, 1, uart_sels, ARRAY_SIZE(uart_sels));
+ clks[IMX6SX_CLK_QSPI2_SEL] = imx_clk_mux_flags("qspi2_sel", base + 0x2c, 15, 3, qspi2_sels, ARRAY_SIZE(qspi2_sels), CLK_SET_RATE_PARENT);
+ clks[IMX6SX_CLK_SPDIF_SEL] = imx_clk_mux("spdif_sel", base + 0x30, 20, 2, audio_sels, ARRAY_SIZE(audio_sels));
+ clks[IMX6SX_CLK_AUDIO_SEL] = imx_clk_mux("audio_sel", base + 0x30, 7, 2, audio_sels, ARRAY_SIZE(audio_sels));
+ clks[IMX6SX_CLK_ENET_PRE_SEL] = imx_clk_mux("enet_pre_sel", base + 0x34, 15, 3, enet_pre_sels, ARRAY_SIZE(enet_pre_sels));
+ clks[IMX6SX_CLK_ENET_SEL] = imx_clk_mux("enet_sel", base + 0x34, 9, 3, enet_sels, ARRAY_SIZE(enet_sels));
+ clks[IMX6SX_CLK_M4_PRE_SEL] = imx_clk_mux("m4_pre_sel", base + 0x34, 6, 3, m4_pre_sels, ARRAY_SIZE(m4_pre_sels));
+ clks[IMX6SX_CLK_M4_SEL] = imx_clk_mux("m4_sel", base + 0x34, 0, 3, m4_sels, ARRAY_SIZE(m4_sels));
+ clks[IMX6SX_CLK_ECSPI_SEL] = imx_clk_mux("ecspi_sel", base + 0x38, 18, 1, ecspi_sels, ARRAY_SIZE(ecspi_sels));
+ clks[IMX6SX_CLK_LCDIF2_PRE_SEL] = imx_clk_mux("lcdif2_pre_sel", base + 0x38, 6, 3, lcdif2_pre_sels, ARRAY_SIZE(lcdif2_pre_sels));
+ clks[IMX6SX_CLK_LCDIF2_SEL] = imx_clk_mux("lcdif2_sel", base + 0x38, 0, 3, lcdif2_sels, ARRAY_SIZE(lcdif2_sels));
+ clks[IMX6SX_CLK_DISPLAY_SEL] = imx_clk_mux("display_sel", base + 0x3c, 14, 2, display_sels, ARRAY_SIZE(display_sels));
+ clks[IMX6SX_CLK_CSI_SEL] = imx_clk_mux("csi_sel", base + 0x3c, 9, 2, csi_sels, ARRAY_SIZE(csi_sels));
+ clks[IMX6SX_CLK_CKO1_SEL] = imx_clk_mux("cko1_sel", base + 0x60, 0, 4, cko1_sels, ARRAY_SIZE(cko1_sels));
+ clks[IMX6SX_CLK_CKO2_SEL] = imx_clk_mux("cko2_sel", base + 0x60, 16, 5, cko2_sels, ARRAY_SIZE(cko2_sels));
+ clks[IMX6SX_CLK_CKO] = imx_clk_mux("cko", base + 0x60, 8, 1, cko_sels, ARRAY_SIZE(cko_sels));
+
+ clks[IMX6SX_CLK_LDB_DI1_DIV_SEL] = imx_clk_mux_flags("ldb_di1_div_sel", base + 0x20, 11, 1, ldb_di1_div_sels, ARRAY_SIZE(ldb_di1_div_sels), CLK_SET_RATE_PARENT);
+ clks[IMX6SX_CLK_LDB_DI0_DIV_SEL] = imx_clk_mux_flags("ldb_di0_div_sel", base + 0x20, 10, 1, ldb_di0_div_sels, ARRAY_SIZE(ldb_di0_div_sels), CLK_SET_RATE_PARENT);
+ clks[IMX6SX_CLK_LDB_DI1_SEL] = imx_clk_mux_flags("ldb_di1_sel", base + 0x2c, 12, 3, ldb_di1_sels, ARRAY_SIZE(ldb_di1_sels), CLK_SET_RATE_PARENT);
+ clks[IMX6SX_CLK_LDB_DI0_SEL] = imx_clk_mux_flags("ldb_di0_sel", base + 0x2c, 9, 3, ldb_di0_sels, ARRAY_SIZE(ldb_di0_sels), CLK_SET_RATE_PARENT);
+ clks[IMX6SX_CLK_LCDIF1_PRE_SEL] = imx_clk_mux_flags("lcdif1_pre_sel", base + 0x38, 15, 3, lcdif1_pre_sels, ARRAY_SIZE(lcdif1_pre_sels), CLK_SET_RATE_PARENT);
+ clks[IMX6SX_CLK_LCDIF1_SEL] = imx_clk_mux_flags("lcdif1_sel", base + 0x38, 9, 3, lcdif1_sels, ARRAY_SIZE(lcdif1_sels), CLK_SET_RATE_PARENT);
+
+ /* name parent_name reg shift width */
+ clks[IMX6SX_CLK_PERIPH_CLK2] = imx_clk_divider("periph_clk2", "periph_clk2_sel", base + 0x14, 27, 3);
+ clks[IMX6SX_CLK_PERIPH2_CLK2] = imx_clk_divider("periph2_clk2", "periph2_clk2_sel", base + 0x14, 0, 3);
+ clks[IMX6SX_CLK_IPG] = imx_clk_divider("ipg", "ahb", base + 0x14, 8, 2);
+ clks[IMX6SX_CLK_GPU_CORE_PODF] = imx_clk_divider("gpu_core_podf", "gpu_core_sel", base + 0x18, 29, 3);
+ clks[IMX6SX_CLK_GPU_AXI_PODF] = imx_clk_divider("gpu_axi_podf", "gpu_axi_sel", base + 0x18, 26, 3);
+ clks[IMX6SX_CLK_LCDIF1_PODF] = imx_clk_divider("lcdif1_podf", "lcdif1_pred", base + 0x18, 23, 3);
+ clks[IMX6SX_CLK_QSPI1_PODF] = imx_clk_divider("qspi1_podf", "qspi1_sel", base + 0x1c, 26, 3);
+ clks[IMX6SX_CLK_EIM_SLOW_PODF] = imx_clk_divider("eim_slow_podf", "eim_slow_sel", base + 0x1c, 23, 3);
+ clks[IMX6SX_CLK_LCDIF2_PODF] = imx_clk_divider("lcdif2_podf", "lcdif2_pred", base + 0x1c, 20, 3);
+ clks[IMX6SX_CLK_PERCLK] = imx_clk_divider("perclk", "perclk_sel", base + 0x1c, 0, 6);
+ clks[IMX6SX_CLK_VID_PODF] = imx_clk_divider("vid_podf", "vid_sel", base + 0x20, 24, 2);
+ clks[IMX6SX_CLK_CAN_PODF] = imx_clk_divider("can_podf", "can_sel", base + 0x20, 2, 6);
+ clks[IMX6SX_CLK_USDHC4_PODF] = imx_clk_divider("usdhc4_podf", "usdhc4_sel", base + 0x24, 22, 3);
+ clks[IMX6SX_CLK_USDHC3_PODF] = imx_clk_divider("usdhc3_podf", "usdhc3_sel", base + 0x24, 19, 3);
+ clks[IMX6SX_CLK_USDHC2_PODF] = imx_clk_divider("usdhc2_podf", "usdhc2_sel", base + 0x24, 16, 3);
+ clks[IMX6SX_CLK_USDHC1_PODF] = imx_clk_divider("usdhc1_podf", "usdhc1_sel", base + 0x24, 11, 3);
+ clks[IMX6SX_CLK_UART_PODF] = imx_clk_divider("uart_podf", "uart_sel", base + 0x24, 0, 6);
+ clks[IMX6SX_CLK_ESAI_PRED] = imx_clk_divider("esai_pred", "esai_sel", base + 0x28, 9, 3);
+ clks[IMX6SX_CLK_ESAI_PODF] = imx_clk_divider("esai_podf", "esai_pred", base + 0x28, 25, 3);
+ clks[IMX6SX_CLK_SSI3_PRED] = imx_clk_divider("ssi3_pred", "ssi3_sel", base + 0x28, 22, 3);
+ clks[IMX6SX_CLK_SSI3_PODF] = imx_clk_divider("ssi3_podf", "ssi3_pred", base + 0x28, 16, 6);
+ clks[IMX6SX_CLK_SSI1_PRED] = imx_clk_divider("ssi1_pred", "ssi1_sel", base + 0x28, 6, 3);
+ clks[IMX6SX_CLK_SSI1_PODF] = imx_clk_divider("ssi1_podf", "ssi1_pred", base + 0x28, 0, 6);
+ clks[IMX6SX_CLK_QSPI2_PRED] = imx_clk_divider("qspi2_pred", "qspi2_sel", base + 0x2c, 18, 3);
+ clks[IMX6SX_CLK_QSPI2_PODF] = imx_clk_divider("qspi2_podf", "qspi2_pred", base + 0x2c, 21, 6);
+ clks[IMX6SX_CLK_SSI2_PRED] = imx_clk_divider("ssi2_pred", "ssi2_sel", base + 0x2c, 6, 3);
+ clks[IMX6SX_CLK_SSI2_PODF] = imx_clk_divider("ssi2_podf", "ssi2_pred", base + 0x2c, 0, 6);
+ clks[IMX6SX_CLK_SPDIF_PRED] = imx_clk_divider("spdif_pred", "spdif_sel", base + 0x30, 25, 3);
+ clks[IMX6SX_CLK_SPDIF_PODF] = imx_clk_divider("spdif_podf", "spdif_pred", base + 0x30, 22, 3);
+ clks[IMX6SX_CLK_AUDIO_PRED] = imx_clk_divider("audio_pred", "audio_sel", base + 0x30, 12, 3);
+ clks[IMX6SX_CLK_AUDIO_PODF] = imx_clk_divider("audio_podf", "audio_pred", base + 0x30, 9, 3);
+ clks[IMX6SX_CLK_ENET_PODF] = imx_clk_divider("enet_podf", "enet_pre_sel", base + 0x34, 12, 3);
+ clks[IMX6SX_CLK_M4_PODF] = imx_clk_divider("m4_podf", "m4_sel", base + 0x34, 3, 3);
+ clks[IMX6SX_CLK_ECSPI_PODF] = imx_clk_divider("ecspi_podf", "ecspi_sel", base + 0x38, 19, 6);
+ clks[IMX6SX_CLK_LCDIF1_PRED] = imx_clk_divider("lcdif1_pred", "lcdif1_pre_sel", base + 0x38, 12, 3);
+ clks[IMX6SX_CLK_LCDIF2_PRED] = imx_clk_divider("lcdif2_pred", "lcdif2_pre_sel", base + 0x38, 3, 3);
+ clks[IMX6SX_CLK_DISPLAY_PODF] = imx_clk_divider("display_podf", "display_sel", base + 0x3c, 16, 3);
+ clks[IMX6SX_CLK_CSI_PODF] = imx_clk_divider("csi_podf", "csi_sel", base + 0x3c, 11, 3);
+ clks[IMX6SX_CLK_CKO1_PODF] = imx_clk_divider("cko1_podf", "cko1_sel", base + 0x60, 4, 3);
+ clks[IMX6SX_CLK_CKO2_PODF] = imx_clk_divider("cko2_podf", "cko2_sel", base + 0x60, 21, 3);
+
+ clks[IMX6SX_CLK_LDB_DI0_DIV_3_5] = imx_clk_fixed_factor("ldb_di0_div_3_5", "ldb_di0_sel", 2, 7);
+ clks[IMX6SX_CLK_LDB_DI0_DIV_7] = imx_clk_fixed_factor("ldb_di0_div_7", "ldb_di0_sel", 1, 7);
+ clks[IMX6SX_CLK_LDB_DI1_DIV_3_5] = imx_clk_fixed_factor("ldb_di1_div_3_5", "ldb_di1_sel", 2, 7);
+ clks[IMX6SX_CLK_LDB_DI1_DIV_7] = imx_clk_fixed_factor("ldb_di1_div_7", "ldb_di1_sel", 1, 7);
+
+ /* name reg shift width busy: reg, shift parent_names num_parents */
+ clks[IMX6SX_CLK_PERIPH] = imx_clk_busy_mux("periph", base + 0x14, 25, 1, base + 0x48, 5, periph_sels, ARRAY_SIZE(periph_sels));
+ clks[IMX6SX_CLK_PERIPH2] = imx_clk_busy_mux("periph2", base + 0x14, 26, 1, base + 0x48, 3, periph2_sels, ARRAY_SIZE(periph2_sels));
+ /* name parent_name reg shift width busy: reg, shift */
+ clks[IMX6SX_CLK_OCRAM_PODF] = imx_clk_busy_divider("ocram_podf", "ocram_sel", base + 0x14, 16, 3, base + 0x48, 0);
+ clks[IMX6SX_CLK_AHB] = imx_clk_busy_divider("ahb", "periph", base + 0x14, 10, 3, base + 0x48, 1);
+ clks[IMX6SX_CLK_MMDC_PODF] = imx_clk_busy_divider("mmdc_podf", "periph2", base + 0x14, 3, 3, base + 0x48, 2);
+ clks[IMX6SX_CLK_ARM] = imx_clk_busy_divider("arm", "pll1_sw", base + 0x10, 0, 3, base + 0x48, 16);
+
+ /* name parent_name reg shift */
+ /* CCGR0 */
+ clks[IMX6SX_CLK_AIPS_TZ1] = imx_clk_gate2("aips_tz1", "ahb", base + 0x68, 0);
+ clks[IMX6SX_CLK_AIPS_TZ2] = imx_clk_gate2("aips_tz2", "ahb", base + 0x68, 2);
+ clks[IMX6SX_CLK_APBH_DMA] = imx_clk_gate2("apbh_dma", "usdhc3", base + 0x68, 4);
+ clks[IMX6SX_CLK_ASRC_MEM] = imx_clk_gate2_shared("asrc_mem", "ahb", base + 0x68, 6, &share_count_asrc);
+ clks[IMX6SX_CLK_ASRC_IPG] = imx_clk_gate2_shared("asrc_ipg", "ahb", base + 0x68, 6, &share_count_asrc);
+ clks[IMX6SX_CLK_CAAM_MEM] = imx_clk_gate2("caam_mem", "ahb", base + 0x68, 8);
+ clks[IMX6SX_CLK_CAAM_ACLK] = imx_clk_gate2("caam_aclk", "ahb", base + 0x68, 10);
+ clks[IMX6SX_CLK_CAAM_IPG] = imx_clk_gate2("caam_ipg", "ipg", base + 0x68, 12);
+ clks[IMX6SX_CLK_CAN1_IPG] = imx_clk_gate2("can1_ipg", "ipg", base + 0x68, 14);
+ clks[IMX6SX_CLK_CAN1_SERIAL] = imx_clk_gate2("can1_serial", "can_podf", base + 0x68, 16);
+ clks[IMX6SX_CLK_CAN2_IPG] = imx_clk_gate2("can2_ipg", "ipg", base + 0x68, 18);
+ clks[IMX6SX_CLK_CAN2_SERIAL] = imx_clk_gate2("can2_serial", "can_podf", base + 0x68, 20);
+ clks[IMX6SX_CLK_DCIC1] = imx_clk_gate2("dcic1", "display_podf", base + 0x68, 24);
+ clks[IMX6SX_CLK_DCIC2] = imx_clk_gate2("dcic2", "display_podf", base + 0x68, 26);
+ clks[IMX6SX_CLK_AIPS_TZ3] = imx_clk_gate2("aips_tz3", "ahb", base + 0x68, 30);
+
+ /* CCGR1 */
+ clks[IMX6SX_CLK_ECSPI1] = imx_clk_gate2("ecspi1", "ecspi_podf", base + 0x6c, 0);
+ clks[IMX6SX_CLK_ECSPI2] = imx_clk_gate2("ecspi2", "ecspi_podf", base + 0x6c, 2);
+ clks[IMX6SX_CLK_ECSPI3] = imx_clk_gate2("ecspi3", "ecspi_podf", base + 0x6c, 4);
+ clks[IMX6SX_CLK_ECSPI4] = imx_clk_gate2("ecspi4", "ecspi_podf", base + 0x6c, 6);
+ clks[IMX6SX_CLK_ECSPI5] = imx_clk_gate2("ecspi5", "ecspi_podf", base + 0x6c, 8);
+ clks[IMX6SX_CLK_EPIT1] = imx_clk_gate2("epit1", "perclk", base + 0x6c, 12);
+ clks[IMX6SX_CLK_EPIT2] = imx_clk_gate2("epit2", "perclk", base + 0x6c, 14);
+ clks[IMX6SX_CLK_ESAI_EXTAL] = imx_clk_gate2_shared("esai_extal", "esai_podf", base + 0x6c, 16, &share_count_esai);
+ clks[IMX6SX_CLK_ESAI_IPG] = imx_clk_gate2_shared("esai_ipg", "ahb", base + 0x6c, 16, &share_count_esai);
+ clks[IMX6SX_CLK_ESAI_MEM] = imx_clk_gate2_shared("esai_mem", "ahb", base + 0x6c, 16, &share_count_esai);
+ clks[IMX6SX_CLK_WAKEUP] = imx_clk_gate2("wakeup", "ipg", base + 0x6c, 18);
+ clks[IMX6SX_CLK_GPT_BUS] = imx_clk_gate2("gpt_bus", "perclk", base + 0x6c, 20);
+ clks[IMX6SX_CLK_GPT_SERIAL] = imx_clk_gate2("gpt_serial", "perclk", base + 0x6c, 22);
+ clks[IMX6SX_CLK_GPU] = imx_clk_gate2("gpu", "gpu_core_podf", base + 0x6c, 26);
+ clks[IMX6SX_CLK_CANFD] = imx_clk_gate2("canfd", "can_podf", base + 0x6c, 30);
+
+ /* CCGR2 */
+ clks[IMX6SX_CLK_CSI] = imx_clk_gate2("csi", "csi_podf", base + 0x70, 2);
+ clks[IMX6SX_CLK_I2C1] = imx_clk_gate2("i2c1", "perclk", base + 0x70, 6);
+ clks[IMX6SX_CLK_I2C2] = imx_clk_gate2("i2c2", "perclk", base + 0x70, 8);
+ clks[IMX6SX_CLK_I2C3] = imx_clk_gate2("i2c3", "perclk", base + 0x70, 10);
+ clks[IMX6SX_CLK_OCOTP] = imx_clk_gate2("ocotp", "ipg", base + 0x70, 12);
+ clks[IMX6SX_CLK_IOMUXC] = imx_clk_gate2("iomuxc", "lcdif1_podf", base + 0x70, 14);
+ clks[IMX6SX_CLK_IPMUX1] = imx_clk_gate2("ipmux1", "ahb", base + 0x70, 16);
+ clks[IMX6SX_CLK_IPMUX2] = imx_clk_gate2("ipmux2", "ahb", base + 0x70, 18);
+ clks[IMX6SX_CLK_IPMUX3] = imx_clk_gate2("ipmux3", "ahb", base + 0x70, 20);
+ clks[IMX6SX_CLK_TZASC1] = imx_clk_gate2("tzasc1", "mmdc_podf", base + 0x70, 22);
+ clks[IMX6SX_CLK_LCDIF_APB] = imx_clk_gate2("lcdif_apb", "display_podf", base + 0x70, 28);
+ clks[IMX6SX_CLK_PXP_AXI] = imx_clk_gate2("pxp_axi", "display_podf", base + 0x70, 30);
+
+ /* CCGR3 */
+ clks[IMX6SX_CLK_M4] = imx_clk_gate2("m4", "m4_podf", base + 0x74, 2);
+ clks[IMX6SX_CLK_ENET] = imx_clk_gate2("enet", "ipg", base + 0x74, 4);
+ clks[IMX6SX_CLK_ENET_AHB] = imx_clk_gate2("enet_ahb", "enet_sel", base + 0x74, 4);
+ clks[IMX6SX_CLK_DISPLAY_AXI] = imx_clk_gate2("display_axi", "display_podf", base + 0x74, 6);
+ clks[IMX6SX_CLK_LCDIF2_PIX] = imx_clk_gate2("lcdif2_pix", "lcdif2_sel", base + 0x74, 8);
+ clks[IMX6SX_CLK_LCDIF1_PIX] = imx_clk_gate2("lcdif1_pix", "lcdif1_sel", base + 0x74, 10);
+ clks[IMX6SX_CLK_LDB_DI0] = imx_clk_gate2("ldb_di0", "ldb_di0_div_sel", base + 0x74, 12);
+ clks[IMX6SX_CLK_QSPI1] = imx_clk_gate2("qspi1", "qspi1_podf", base + 0x74, 14);
+ clks[IMX6SX_CLK_MLB] = imx_clk_gate2("mlb", "ahb", base + 0x74, 18);
+ clks[IMX6SX_CLK_MMDC_P0_FAST] = imx_clk_gate2("mmdc_p0_fast", "mmdc_podf", base + 0x74, 20);
+ clks[IMX6SX_CLK_MMDC_P0_IPG] = imx_clk_gate2("mmdc_p0_ipg", "ipg", base + 0x74, 24);
+ clks[IMX6SX_CLK_OCRAM] = imx_clk_gate2("ocram", "ocram_podf", base + 0x74, 28);
+
+ /* CCGR4 */
+ clks[IMX6SX_CLK_PCIE_AXI] = imx_clk_gate2("pcie_axi", "display_podf", base + 0x78, 0);
+ clks[IMX6SX_CLK_QSPI2] = imx_clk_gate2("qspi2", "qspi2_podf", base + 0x78, 10);
+ clks[IMX6SX_CLK_PER1_BCH] = imx_clk_gate2("per1_bch", "usdhc3", base + 0x78, 12);
+ clks[IMX6SX_CLK_PER2_MAIN] = imx_clk_gate2("per2_main", "ahb", base + 0x78, 14);
+ clks[IMX6SX_CLK_PWM1] = imx_clk_gate2("pwm1", "perclk", base + 0x78, 16);
+ clks[IMX6SX_CLK_PWM2] = imx_clk_gate2("pwm2", "perclk", base + 0x78, 18);
+ clks[IMX6SX_CLK_PWM3] = imx_clk_gate2("pwm3", "perclk", base + 0x78, 20);
+ clks[IMX6SX_CLK_PWM4] = imx_clk_gate2("pwm4", "perclk", base + 0x78, 22);
+ clks[IMX6SX_CLK_GPMI_BCH_APB] = imx_clk_gate2("gpmi_bch_apb", "usdhc3", base + 0x78, 24);
+ clks[IMX6SX_CLK_GPMI_BCH] = imx_clk_gate2("gpmi_bch", "usdhc4", base + 0x78, 26);
+ clks[IMX6SX_CLK_GPMI_IO] = imx_clk_gate2("gpmi_io", "qspi2_podf", base + 0x78, 28);
+ clks[IMX6SX_CLK_GPMI_APB] = imx_clk_gate2("gpmi_apb", "usdhc3", base + 0x78, 30);
+
+ /* CCGR5 */
+ clks[IMX6SX_CLK_ROM] = imx_clk_gate2("rom", "ahb", base + 0x7c, 0);
+ clks[IMX6SX_CLK_SDMA] = imx_clk_gate2("sdma", "ahb", base + 0x7c, 6);
+ clks[IMX6SX_CLK_SPBA] = imx_clk_gate2("spba", "ipg", base + 0x7c, 12);
+ clks[IMX6SX_CLK_AUDIO] = imx_clk_gate2_shared("audio", "audio_podf", base + 0x7c, 14, &share_count_audio);
+ clks[IMX6SX_CLK_SPDIF] = imx_clk_gate2_shared("spdif", "spdif_podf", base + 0x7c, 14, &share_count_audio);
+ clks[IMX6SX_CLK_SSI1_IPG] = imx_clk_gate2("ssi1_ipg", "ipg", base + 0x7c, 18);
+ clks[IMX6SX_CLK_SSI2_IPG] = imx_clk_gate2("ssi2_ipg", "ipg", base + 0x7c, 20);
+ clks[IMX6SX_CLK_SSI3_IPG] = imx_clk_gate2("ssi3_ipg", "ipg", base + 0x7c, 22);
+ clks[IMX6SX_CLK_SSI1] = imx_clk_gate2("ssi1", "ssi1_podf", base + 0x7c, 18);
+ clks[IMX6SX_CLK_SSI2] = imx_clk_gate2("ssi2", "ssi2_podf", base + 0x7c, 20);
+ clks[IMX6SX_CLK_SSI3] = imx_clk_gate2("ssi3", "ssi3_podf", base + 0x7c, 22);
+ clks[IMX6SX_CLK_UART_IPG] = imx_clk_gate2("uart_ipg", "ipg", base + 0x7c, 24);
+ clks[IMX6SX_CLK_UART_SERIAL] = imx_clk_gate2("uart_serial", "uart_podf", base + 0x7c, 26);
+ clks[IMX6SX_CLK_SAI1_IPG] = imx_clk_gate2("sai1_ipg", "ipg", base + 0x7c, 28);
+ clks[IMX6SX_CLK_SAI2_IPG] = imx_clk_gate2("sai2_ipg", "ipg", base + 0x7c, 30);
+ clks[IMX6SX_CLK_SAI1] = imx_clk_gate2("sai1", "ssi1_podf", base + 0x7c, 28);
+ clks[IMX6SX_CLK_SAI2] = imx_clk_gate2("sai2", "ssi2_podf", base + 0x7c, 30);
+
+ /* CCGR6 */
+ clks[IMX6SX_CLK_USBOH3] = imx_clk_gate2("usboh3", "ipg", base + 0x80, 0);
+ clks[IMX6SX_CLK_USDHC1] = imx_clk_gate2("usdhc1", "usdhc1_podf", base + 0x80, 2);
+ clks[IMX6SX_CLK_USDHC2] = imx_clk_gate2("usdhc2", "usdhc2_podf", base + 0x80, 4);
+ clks[IMX6SX_CLK_USDHC3] = imx_clk_gate2("usdhc3", "usdhc3_podf", base + 0x80, 6);
+ clks[IMX6SX_CLK_USDHC4] = imx_clk_gate2("usdhc4", "usdhc4_podf", base + 0x80, 8);
+ clks[IMX6SX_CLK_EIM_SLOW] = imx_clk_gate2("eim_slow", "eim_slow_podf", base + 0x80, 10);
+ clks[IMX6SX_CLK_PWM8] = imx_clk_gate2("pwm8", "perclk", base + 0x80, 16);
+ clks[IMX6SX_CLK_VADC] = imx_clk_gate2("vadc", "vid_podf", base + 0x80, 20);
+ clks[IMX6SX_CLK_GIS] = imx_clk_gate2("gis", "display_podf", base + 0x80, 22);
+ clks[IMX6SX_CLK_I2C4] = imx_clk_gate2("i2c4", "perclk", base + 0x80, 24);
+ clks[IMX6SX_CLK_PWM5] = imx_clk_gate2("pwm5", "perclk", base + 0x80, 26);
+ clks[IMX6SX_CLK_PWM6] = imx_clk_gate2("pwm6", "perclk", base + 0x80, 28);
+ clks[IMX6SX_CLK_PWM7] = imx_clk_gate2("pwm7", "perclk", base + 0x80, 30);
+
+ clks[IMX6SX_CLK_CKO1] = imx_clk_gate("cko1", "cko1_podf", base + 0x60, 7);
+ clks[IMX6SX_CLK_CKO2] = imx_clk_gate("cko2", "cko2_podf", base + 0x60, 24);
+
+ /* mask handshake of mmdc */
+ writel_relaxed(BM_CCM_CCDR_MMDC_CH0_MASK, base + CCDR);
+
+ for (i = 0; i < ARRAY_SIZE(clks); i++)
+ if (IS_ERR(clks[i]))
+ pr_err("i.MX6sx clk %d: register failed with %ld\n", i, PTR_ERR(clks[i]));
+
+ clk_data.clks = clks;
+ clk_data.clk_num = ARRAY_SIZE(clks);
+ of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
+
+ clk_register_clkdev(clks[IMX6SX_CLK_GPT_BUS], "ipg", "imx-gpt.0");
+ clk_register_clkdev(clks[IMX6SX_CLK_GPT_SERIAL], "per", "imx-gpt.0");
+
+ for (i = 0; i < ARRAY_SIZE(clks_init_on); i++)
+ clk_prepare_enable(clks[clks_init_on[i]]);
+
+ if (IS_ENABLED(CONFIG_USB_MXS_PHY)) {
+ clk_prepare_enable(clks[IMX6SX_CLK_USBPHY1_GATE]);
+ clk_prepare_enable(clks[IMX6SX_CLK_USBPHY2_GATE]);
+ }
+
+ /* Set the default 132MHz for EIM module */
+ clk_set_parent(clks[IMX6SX_CLK_EIM_SLOW_SEL], clks[IMX6SX_CLK_PLL2_PFD2]);
+ clk_set_rate(clks[IMX6SX_CLK_EIM_SLOW], 132000000);
+
+ /* set parent clock for LCDIF1 pixel clock */
+ clk_set_parent(clks[IMX6SX_CLK_LCDIF1_PRE_SEL], clks[IMX6SX_CLK_PLL5_VIDEO_DIV]);
+ clk_set_parent(clks[IMX6SX_CLK_LCDIF1_SEL], clks[IMX6SX_CLK_LCDIF1_PODF]);
+
+ /* Set the parent clks of PCIe lvds1 and pcie_axi to be pcie ref, axi */
+ if (clk_set_parent(clks[IMX6SX_CLK_LVDS1_SEL], clks[IMX6SX_CLK_PCIE_REF_125M]))
+ pr_err("Failed to set pcie bus parent clk.\n");
+ if (clk_set_parent(clks[IMX6SX_CLK_PCIE_AXI_SEL], clks[IMX6SX_CLK_AXI]))
+ pr_err("Failed to set pcie parent clk.\n");
+
+ /*
+ * Init enet system AHB clock, set to 200Mhz
+ * pll2_pfd2_396m-> ENET_PODF-> ENET_AHB
+ */
+ clk_set_parent(clks[IMX6SX_CLK_ENET_PRE_SEL], clks[IMX6SX_CLK_PLL2_PFD2]);
+ clk_set_parent(clks[IMX6SX_CLK_ENET_SEL], clks[IMX6SX_CLK_ENET_PODF]);
+ clk_set_rate(clks[IMX6SX_CLK_ENET_PODF], 200000000);
+ clk_set_rate(clks[IMX6SX_CLK_ENET_REF], 125000000);
+ clk_set_rate(clks[IMX6SX_CLK_ENET2_REF], 125000000);
+
+ /* Audio clocks */
+ clk_set_rate(clks[IMX6SX_CLK_PLL4_AUDIO_DIV], 393216000);
+
+ clk_set_parent(clks[IMX6SX_CLK_SPDIF_SEL], clks[IMX6SX_CLK_PLL4_AUDIO_DIV]);
+ clk_set_rate(clks[IMX6SX_CLK_SPDIF_PODF], 98304000);
+
+ clk_set_parent(clks[IMX6SX_CLK_AUDIO_SEL], clks[IMX6SX_CLK_PLL3_USB_OTG]);
+ clk_set_rate(clks[IMX6SX_CLK_AUDIO_PODF], 24000000);
+
+ clk_set_parent(clks[IMX6SX_CLK_SSI1_SEL], clks[IMX6SX_CLK_PLL4_AUDIO_DIV]);
+ clk_set_parent(clks[IMX6SX_CLK_SSI2_SEL], clks[IMX6SX_CLK_PLL4_AUDIO_DIV]);
+ clk_set_parent(clks[IMX6SX_CLK_SSI3_SEL], clks[IMX6SX_CLK_PLL4_AUDIO_DIV]);
+ clk_set_rate(clks[IMX6SX_CLK_SSI1_PODF], 24576000);
+ clk_set_rate(clks[IMX6SX_CLK_SSI2_PODF], 24576000);
+ clk_set_rate(clks[IMX6SX_CLK_SSI3_PODF], 24576000);
+
+ clk_set_parent(clks[IMX6SX_CLK_ESAI_SEL], clks[IMX6SX_CLK_PLL4_AUDIO_DIV]);
+ clk_set_rate(clks[IMX6SX_CLK_ESAI_PODF], 24576000);
+
+ /* Set parent clock for vadc */
+ clk_set_parent(clks[IMX6SX_CLK_VID_SEL], clks[IMX6SX_CLK_PLL3_USB_OTG]);
+
+ /* default parent of can_sel clock is invalid, manually set it here */
+ clk_set_parent(clks[IMX6SX_CLK_CAN_SEL], clks[IMX6SX_CLK_PLL3_60M]);
+
+ /* Update gpu clock from default 528M to 720M */
+ clk_set_parent(clks[IMX6SX_CLK_GPU_CORE_SEL], clks[IMX6SX_CLK_PLL3_PFD0]);
+ clk_set_parent(clks[IMX6SX_CLK_GPU_AXI_SEL], clks[IMX6SX_CLK_PLL3_PFD0]);
+
+ /* Set initial power mode */
+ imx6q_set_lpm(WAIT_CLOCKED);
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,imx6sx-gpt");
+ mxc_timer_init_dt(np);
+}
+CLK_OF_DECLARE(imx6sx, "fsl,imx6sx-ccm", imx6sx_clocks_init);
diff --git a/arch/arm/mach-imx/clk.h b/arch/arm/mach-imx/clk.h
index 048c5ad8a80b..e29f6ebe9f39 100644
--- a/arch/arm/mach-imx/clk.h
+++ b/arch/arm/mach-imx/clk.h
@@ -28,7 +28,8 @@ struct clk *imx_clk_pllv3(enum imx_pllv3_type type, const char *name,
struct clk *clk_register_gate2(struct device *dev, const char *name,
const char *parent_name, unsigned long flags,
void __iomem *reg, u8 bit_idx,
- u8 clk_gate_flags, spinlock_t *lock);
+ u8 clk_gate_flags, spinlock_t *lock,
+ unsigned int *share_count);
struct clk * imx_obtain_fixed_clock(
const char *name, unsigned long rate);
@@ -37,7 +38,15 @@ static inline struct clk *imx_clk_gate2(const char *name, const char *parent,
void __iomem *reg, u8 shift)
{
return clk_register_gate2(NULL, name, parent, CLK_SET_RATE_PARENT, reg,
- shift, 0, &imx_ccm_lock);
+ shift, 0, &imx_ccm_lock, NULL);
+}
+
+static inline struct clk *imx_clk_gate2_shared(const char *name,
+ const char *parent, void __iomem *reg, u8 shift,
+ unsigned int *share_count)
+{
+ return clk_register_gate2(NULL, name, parent, CLK_SET_RATE_PARENT, reg,
+ shift, 0, &imx_ccm_lock, share_count);
}
struct clk *imx_clk_pfd(const char *name, const char *parent_name,
diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h
index b5241ea76706..9ab785ce13e8 100644
--- a/arch/arm/mach-imx/common.h
+++ b/arch/arm/mach-imx/common.h
@@ -17,6 +17,7 @@ struct irq_data;
struct platform_device;
struct pt_regs;
struct clk;
+struct device_node;
enum mxc_cpu_pwr_mode;
void mx1_map_io(void);
@@ -56,6 +57,7 @@ void imx51_init_late(void);
void imx53_init_late(void);
void epit_timer_init(void __iomem *base, int irq);
void mxc_timer_init(void __iomem *, int);
+void mxc_timer_init_dt(struct device_node *);
int mx1_clocks_init(unsigned long fref);
int mx21_clocks_init(unsigned long lref, unsigned long fref);
int mx25_clocks_init(void);
@@ -99,19 +101,6 @@ enum mx3_cpu_pwr_mode {
void mx3_cpu_lp_set(enum mx3_cpu_pwr_mode mode);
void imx_print_silicon_rev(const char *cpu, int srev);
-void avic_handle_irq(struct pt_regs *);
-void tzic_handle_irq(struct pt_regs *);
-
-#define imx1_handle_irq avic_handle_irq
-#define imx21_handle_irq avic_handle_irq
-#define imx25_handle_irq avic_handle_irq
-#define imx27_handle_irq avic_handle_irq
-#define imx31_handle_irq avic_handle_irq
-#define imx35_handle_irq avic_handle_irq
-#define imx50_handle_irq tzic_handle_irq
-#define imx51_handle_irq tzic_handle_irq
-#define imx53_handle_irq tzic_handle_irq
-
void imx_enable_cpu(int cpu, bool enable);
void imx_set_cpu_jump(int cpu, void *jump_addr);
u32 imx_get_cpu_arg(int cpu);
diff --git a/arch/arm/mach-imx/cpu.c b/arch/arm/mach-imx/cpu.c
index ba3b498a67ec..bbe8ff1f0412 100644
--- a/arch/arm/mach-imx/cpu.c
+++ b/arch/arm/mach-imx/cpu.c
@@ -111,6 +111,9 @@ struct device * __init imx_soc_device_init(void)
case MXC_CPU_IMX6DL:
soc_id = "i.MX6DL";
break;
+ case MXC_CPU_IMX6SX:
+ soc_id = "i.MX6SX";
+ break;
case MXC_CPU_IMX6Q:
soc_id = "i.MX6Q";
break;
diff --git a/arch/arm/mach-imx/devices/platform-mx2-emma.c b/arch/arm/mach-imx/devices/platform-mx2-emma.c
index 11bd01d402f2..0dc0651825b1 100644
--- a/arch/arm/mach-imx/devices/platform-mx2-emma.c
+++ b/arch/arm/mach-imx/devices/platform-mx2-emma.c
@@ -12,7 +12,7 @@
#define imx_mx2_emmaprp_data_entry_single(soc) \
{ \
.iobase = soc ## _EMMAPRP_BASE_ADDR, \
- .iosize = SZ_32, \
+ .iosize = SZ_256, \
.irq = soc ## _INT_EMMAPRP, \
}
diff --git a/arch/arm/mach-imx/eukrea_mbimxsd51-baseboard.c b/arch/arm/mach-imx/eukrea_mbimxsd51-baseboard.c
deleted file mode 100644
index 9be6c1e69d68..000000000000
--- a/arch/arm/mach-imx/eukrea_mbimxsd51-baseboard.c
+++ /dev/null
@@ -1,231 +0,0 @@
-/*
- * Copyright (C) 2010 Eric Benard - eric@eukrea.com
- *
- * Based on pcm970-baseboard.c which is :
- * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-
-#include <linux/gpio.h>
-#include <linux/interrupt.h>
-#include <linux/leds.h>
-#include <linux/platform_device.h>
-#include <linux/input.h>
-#include <linux/i2c.h>
-#include <video/platform_lcd.h>
-#include <linux/backlight.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-
-#include "common.h"
-#include "devices-imx51.h"
-#include "hardware.h"
-#include "iomux-mx51.h"
-
-static iomux_v3_cfg_t eukrea_mbimxsd51_pads[] = {
- /* LED */
- MX51_PAD_NANDF_D10__GPIO3_30,
- /* SWITCH */
- NEW_PAD_CTRL(MX51_PAD_NANDF_D9__GPIO3_31, PAD_CTL_PUS_22K_UP |
- PAD_CTL_PKE | PAD_CTL_SRE_FAST |
- PAD_CTL_DSE_HIGH | PAD_CTL_PUE | PAD_CTL_HYS),
- /* UART2 */
- MX51_PAD_UART2_RXD__UART2_RXD,
- MX51_PAD_UART2_TXD__UART2_TXD,
- /* UART 3 */
- MX51_PAD_UART3_RXD__UART3_RXD,
- MX51_PAD_UART3_TXD__UART3_TXD,
- MX51_PAD_KEY_COL4__UART3_RTS,
- MX51_PAD_KEY_COL5__UART3_CTS,
- /* SD */
- MX51_PAD_SD1_CMD__SD1_CMD,
- MX51_PAD_SD1_CLK__SD1_CLK,
- MX51_PAD_SD1_DATA0__SD1_DATA0,
- MX51_PAD_SD1_DATA1__SD1_DATA1,
- MX51_PAD_SD1_DATA2__SD1_DATA2,
- MX51_PAD_SD1_DATA3__SD1_DATA3,
- /* SD1 CD */
- NEW_PAD_CTRL(MX51_PAD_GPIO1_0__SD1_CD, PAD_CTL_PUS_22K_UP |
- PAD_CTL_PKE | PAD_CTL_SRE_FAST |
- PAD_CTL_DSE_HIGH | PAD_CTL_PUE | PAD_CTL_HYS),
- /* SSI */
- MX51_PAD_AUD3_BB_TXD__AUD3_TXD,
- MX51_PAD_AUD3_BB_RXD__AUD3_RXD,
- MX51_PAD_AUD3_BB_CK__AUD3_TXC,
- MX51_PAD_AUD3_BB_FS__AUD3_TXFS,
- /* LCD Backlight */
- MX51_PAD_DI1_D1_CS__GPIO3_4,
- /* LCD RST */
- MX51_PAD_CSI1_D9__GPIO3_13,
-};
-
-#define GPIO_LED1 IMX_GPIO_NR(3, 30)
-#define GPIO_SWITCH1 IMX_GPIO_NR(3, 31)
-#define GPIO_LCDRST IMX_GPIO_NR(3, 13)
-#define GPIO_LCDBL IMX_GPIO_NR(3, 4)
-
-static void eukrea_mbimxsd51_lcd_power_set(struct plat_lcd_data *pd,
- unsigned int power)
-{
- if (power)
- gpio_direction_output(GPIO_LCDRST, 1);
- else
- gpio_direction_output(GPIO_LCDRST, 0);
-}
-
-static struct plat_lcd_data eukrea_mbimxsd51_lcd_power_data = {
- .set_power = eukrea_mbimxsd51_lcd_power_set,
-};
-
-static struct platform_device eukrea_mbimxsd51_lcd_powerdev = {
- .name = "platform-lcd",
- .dev.platform_data = &eukrea_mbimxsd51_lcd_power_data,
-};
-
-static void eukrea_mbimxsd51_bl_set_intensity(int intensity)
-{
- if (intensity)
- gpio_direction_output(GPIO_LCDBL, 1);
- else
- gpio_direction_output(GPIO_LCDBL, 0);
-}
-
-static struct generic_bl_info eukrea_mbimxsd51_bl_info = {
- .name = "eukrea_mbimxsd51-bl",
- .max_intensity = 0xff,
- .default_intensity = 0xff,
- .set_bl_intensity = eukrea_mbimxsd51_bl_set_intensity,
-};
-
-static struct platform_device eukrea_mbimxsd51_bl_dev = {
- .name = "generic-bl",
- .id = 1,
- .dev = {
- .platform_data = &eukrea_mbimxsd51_bl_info,
- },
-};
-
-static const struct gpio_led eukrea_mbimxsd51_leds[] __initconst = {
- {
- .name = "led1",
- .default_trigger = "heartbeat",
- .active_low = 1,
- .gpio = GPIO_LED1,
- },
-};
-
-static const struct gpio_led_platform_data
- eukrea_mbimxsd51_led_info __initconst = {
- .leds = eukrea_mbimxsd51_leds,
- .num_leds = ARRAY_SIZE(eukrea_mbimxsd51_leds),
-};
-
-static struct gpio_keys_button eukrea_mbimxsd51_gpio_buttons[] = {
- {
- .gpio = GPIO_SWITCH1,
- .code = BTN_0,
- .desc = "BP1",
- .active_low = 1,
- .wakeup = 1,
- },
-};
-
-static const struct gpio_keys_platform_data
- eukrea_mbimxsd51_button_data __initconst = {
- .buttons = eukrea_mbimxsd51_gpio_buttons,
- .nbuttons = ARRAY_SIZE(eukrea_mbimxsd51_gpio_buttons),
-};
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
- .flags = IMXUART_HAVE_RTSCTS,
-};
-
-static struct i2c_board_info eukrea_mbimxsd51_i2c_devices[] = {
- {
- I2C_BOARD_INFO("tlv320aic23", 0x1a),
- },
-};
-
-static const
-struct imx_ssi_platform_data eukrea_mbimxsd51_ssi_pdata __initconst = {
- .flags = IMX_SSI_SYN | IMX_SSI_NET | IMX_SSI_USE_I2S_SLAVE,
-};
-
-static int screen_type;
-
-static int __init eukrea_mbimxsd51_screen_type(char *options)
-{
- if (!strcmp(options, "dvi"))
- screen_type = 1;
- else if (!strcmp(options, "tft"))
- screen_type = 0;
-
- return 0;
-}
-__setup("screen_type=", eukrea_mbimxsd51_screen_type);
-
-/*
- * system init for baseboard usage. Will be called by cpuimx51sd init.
- *
- * Add platform devices present on this baseboard and init
- * them from CPU side as far as required to use them later on
- */
-void __init eukrea_mbimxsd51_baseboard_init(void)
-{
- if (mxc_iomux_v3_setup_multiple_pads(eukrea_mbimxsd51_pads,
- ARRAY_SIZE(eukrea_mbimxsd51_pads)))
- printk(KERN_ERR "error setting mbimxsd pads !\n");
-
- imx51_add_imx_uart(1, NULL);
- imx51_add_imx_uart(2, &uart_pdata);
-
- imx51_add_sdhci_esdhc_imx(0, NULL);
-
- imx51_add_imx_ssi(0, &eukrea_mbimxsd51_ssi_pdata);
-
- gpio_request(GPIO_LED1, "LED1");
- gpio_direction_output(GPIO_LED1, 1);
- gpio_free(GPIO_LED1);
-
- gpio_request(GPIO_SWITCH1, "SWITCH1");
- gpio_direction_input(GPIO_SWITCH1);
- gpio_free(GPIO_SWITCH1);
-
- gpio_request(GPIO_LCDRST, "LCDRST");
- gpio_direction_output(GPIO_LCDRST, 0);
- gpio_request(GPIO_LCDBL, "LCDBL");
- gpio_direction_output(GPIO_LCDBL, 0);
- if (!screen_type) {
- platform_device_register(&eukrea_mbimxsd51_bl_dev);
- platform_device_register(&eukrea_mbimxsd51_lcd_powerdev);
- } else {
- gpio_free(GPIO_LCDRST);
- gpio_free(GPIO_LCDBL);
- }
-
- i2c_register_board_info(0, eukrea_mbimxsd51_i2c_devices,
- ARRAY_SIZE(eukrea_mbimxsd51_i2c_devices));
-
- gpio_led_register_device(-1, &eukrea_mbimxsd51_led_info);
- imx_add_gpio_keys(&eukrea_mbimxsd51_button_data);
- imx_add_platform_device("eukrea_tlv320", 0, NULL, 0, NULL, 0);
-}
diff --git a/arch/arm/mach-imx/imx25-dt.c b/arch/arm/mach-imx/imx25-dt.c
index 3e1ec5ffe630..42a65e067443 100644
--- a/arch/arm/mach-imx/imx25-dt.c
+++ b/arch/arm/mach-imx/imx25-dt.c
@@ -38,7 +38,6 @@ DT_MACHINE_START(IMX25_DT, "Freescale i.MX25 (Device Tree Support)")
.map_io = mx25_map_io,
.init_early = imx25_init_early,
.init_irq = mx25_init_irq,
- .handle_irq = imx25_handle_irq,
.init_time = imx25_timer_init,
.init_machine = imx25_dt_init,
.dt_compat = imx25_dt_board_compat,
diff --git a/arch/arm/mach-imx/imx27-dt.c b/arch/arm/mach-imx/imx27-dt.c
index 4e235ecb4021..17bd4058133d 100644
--- a/arch/arm/mach-imx/imx27-dt.c
+++ b/arch/arm/mach-imx/imx27-dt.c
@@ -43,7 +43,6 @@ DT_MACHINE_START(IMX27_DT, "Freescale i.MX27 (Device Tree Support)")
.map_io = mx27_map_io,
.init_early = imx27_init_early,
.init_irq = mx27_init_irq,
- .handle_irq = imx27_handle_irq,
.init_time = imx27_timer_init,
.init_machine = imx27_dt_init,
.dt_compat = imx27_dt_board_compat,
diff --git a/arch/arm/mach-imx/imx31-dt.c b/arch/arm/mach-imx/imx31-dt.c
index e1e70ef7bc2d..581f4d6c9b8a 100644
--- a/arch/arm/mach-imx/imx31-dt.c
+++ b/arch/arm/mach-imx/imx31-dt.c
@@ -39,7 +39,6 @@ DT_MACHINE_START(IMX31_DT, "Freescale i.MX31 (Device Tree Support)")
.map_io = mx31_map_io,
.init_early = imx31_init_early,
.init_irq = mx31_init_irq,
- .handle_irq = imx31_handle_irq,
.init_time = imx31_dt_timer_init,
.init_machine = imx31_dt_init,
.dt_compat = imx31_dt_board_compat,
diff --git a/arch/arm/mach-imx/imx35-dt.c b/arch/arm/mach-imx/imx35-dt.c
index 9d48e0065a63..a62854c59240 100644
--- a/arch/arm/mach-imx/imx35-dt.c
+++ b/arch/arm/mach-imx/imx35-dt.c
@@ -43,7 +43,6 @@ DT_MACHINE_START(IMX35_DT, "Freescale i.MX35 (Device Tree Support)")
.map_io = mx35_map_io,
.init_early = imx35_init_early,
.init_irq = imx35_irq_init,
- .handle_irq = imx35_handle_irq,
.init_machine = imx35_dt_init,
.dt_compat = imx35_dt_board_compat,
.restart = mxc_restart,
diff --git a/arch/arm/mach-imx/imx51-dt.c b/arch/arm/mach-imx/imx51-dt.c
index 0230d78d1413..b8cd968faa52 100644
--- a/arch/arm/mach-imx/imx51-dt.c
+++ b/arch/arm/mach-imx/imx51-dt.c
@@ -38,7 +38,6 @@ DT_MACHINE_START(IMX51_DT, "Freescale i.MX51 (Device Tree Support)")
.map_io = mx51_map_io,
.init_early = imx51_init_early,
.init_irq = mx51_init_irq,
- .handle_irq = imx51_handle_irq,
.init_machine = imx51_dt_init,
.init_late = imx51_init_late,
.dt_compat = imx51_dt_board_compat,
diff --git a/arch/arm/mach-imx/mach-apf9328.c b/arch/arm/mach-imx/mach-apf9328.c
index 067580b2969b..ebbb5ab63529 100644
--- a/arch/arm/mach-imx/mach-apf9328.c
+++ b/arch/arm/mach-imx/mach-apf9328.c
@@ -142,7 +142,6 @@ MACHINE_START(APF9328, "Armadeus APF9328")
.map_io = mx1_map_io,
.init_early = imx1_init_early,
.init_irq = mx1_init_irq,
- .handle_irq = imx1_handle_irq,
.init_time = apf9328_timer_init,
.init_machine = apf9328_init,
.restart = mxc_restart,
diff --git a/arch/arm/mach-imx/mach-armadillo5x0.c b/arch/arm/mach-imx/mach-armadillo5x0.c
index 58b864a3fc20..39406b7e3228 100644
--- a/arch/arm/mach-imx/mach-armadillo5x0.c
+++ b/arch/arm/mach-imx/mach-armadillo5x0.c
@@ -562,7 +562,6 @@ MACHINE_START(ARMADILLO5X0, "Armadillo-500")
.map_io = mx31_map_io,
.init_early = imx31_init_early,
.init_irq = mx31_init_irq,
- .handle_irq = imx31_handle_irq,
.init_time = armadillo5x0_timer_init,
.init_machine = armadillo5x0_init,
.restart = mxc_restart,
diff --git a/arch/arm/mach-imx/mach-bug.c b/arch/arm/mach-imx/mach-bug.c
index 2d00476f7d2c..c97d7cb39135 100644
--- a/arch/arm/mach-imx/mach-bug.c
+++ b/arch/arm/mach-imx/mach-bug.c
@@ -57,7 +57,6 @@ MACHINE_START(BUG, "BugLabs BUGBase")
.map_io = mx31_map_io,
.init_early = imx31_init_early,
.init_irq = mx31_init_irq,
- .handle_irq = imx31_handle_irq,
.init_time = bug_timer_init,
.init_machine = bug_board_init,
.restart = mxc_restart,
diff --git a/arch/arm/mach-imx/mach-cpuimx27.c b/arch/arm/mach-imx/mach-cpuimx27.c
index ea50870bda80..75b7b6aa2720 100644
--- a/arch/arm/mach-imx/mach-cpuimx27.c
+++ b/arch/arm/mach-imx/mach-cpuimx27.c
@@ -314,7 +314,6 @@ MACHINE_START(EUKREA_CPUIMX27, "EUKREA CPUIMX27")
.map_io = mx27_map_io,
.init_early = imx27_init_early,
.init_irq = mx27_init_irq,
- .handle_irq = imx27_handle_irq,
.init_time = eukrea_cpuimx27_timer_init,
.init_machine = eukrea_cpuimx27_init,
.restart = mxc_restart,
diff --git a/arch/arm/mach-imx/mach-cpuimx35.c b/arch/arm/mach-imx/mach-cpuimx35.c
index 65e4c53e1554..1ffa27169045 100644
--- a/arch/arm/mach-imx/mach-cpuimx35.c
+++ b/arch/arm/mach-imx/mach-cpuimx35.c
@@ -199,7 +199,6 @@ MACHINE_START(EUKREA_CPUIMX35SD, "Eukrea CPUIMX35")
.map_io = mx35_map_io,
.init_early = imx35_init_early,
.init_irq = mx35_init_irq,
- .handle_irq = imx35_handle_irq,
.init_time = eukrea_cpuimx35_timer_init,
.init_machine = eukrea_cpuimx35_init,
.restart = mxc_restart,
diff --git a/arch/arm/mach-imx/mach-cpuimx51sd.c b/arch/arm/mach-imx/mach-cpuimx51sd.c
deleted file mode 100644
index 1fba2b8e983f..000000000000
--- a/arch/arm/mach-imx/mach-cpuimx51sd.c
+++ /dev/null
@@ -1,364 +0,0 @@
-/*
- *
- * Copyright (C) 2010 Eric Bénard <eric@eukrea.com>
- *
- * based on board-mx51_babbage.c which is
- * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/i2c/tsc2007.h>
-#include <linux/gpio.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/interrupt.h>
-#include <linux/i2c-gpio.h>
-#include <linux/spi/spi.h>
-#include <linux/can/platform/mcp251x.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include "common.h"
-#include "devices-imx51.h"
-#include "eukrea-baseboards.h"
-#include "hardware.h"
-#include "iomux-mx51.h"
-
-#define USBH1_RST IMX_GPIO_NR(2, 28)
-#define ETH_RST IMX_GPIO_NR(2, 31)
-#define TSC2007_IRQGPIO_REV2 IMX_GPIO_NR(3, 12)
-#define TSC2007_IRQGPIO_REV3 IMX_GPIO_NR(4, 0)
-#define CAN_IRQGPIO IMX_GPIO_NR(1, 1)
-#define CAN_RST IMX_GPIO_NR(4, 15)
-#define CAN_NCS IMX_GPIO_NR(4, 24)
-#define CAN_RXOBF_REV2 IMX_GPIO_NR(1, 4)
-#define CAN_RXOBF_REV3 IMX_GPIO_NR(3, 12)
-#define CAN_RX1BF IMX_GPIO_NR(1, 6)
-#define CAN_TXORTS IMX_GPIO_NR(1, 7)
-#define CAN_TX1RTS IMX_GPIO_NR(1, 8)
-#define CAN_TX2RTS IMX_GPIO_NR(1, 9)
-#define I2C_SCL IMX_GPIO_NR(4, 16)
-#define I2C_SDA IMX_GPIO_NR(4, 17)
-
-/* USB_CTRL_1 */
-#define MX51_USB_CTRL_1_OFFSET 0x10
-#define MX51_USB_CTRL_UH1_EXT_CLK_EN (1 << 25)
-
-#define MX51_USB_PLLDIV_12_MHZ 0x00
-#define MX51_USB_PLL_DIV_19_2_MHZ 0x01
-#define MX51_USB_PLL_DIV_24_MHZ 0x02
-
-static iomux_v3_cfg_t eukrea_cpuimx51sd_pads[] = {
- /* UART1 */
- MX51_PAD_UART1_RXD__UART1_RXD,
- MX51_PAD_UART1_TXD__UART1_TXD,
- MX51_PAD_UART1_RTS__UART1_RTS,
- MX51_PAD_UART1_CTS__UART1_CTS,
-
- /* USB HOST1 */
- MX51_PAD_USBH1_CLK__USBH1_CLK,
- MX51_PAD_USBH1_DIR__USBH1_DIR,
- MX51_PAD_USBH1_NXT__USBH1_NXT,
- MX51_PAD_USBH1_DATA0__USBH1_DATA0,
- MX51_PAD_USBH1_DATA1__USBH1_DATA1,
- MX51_PAD_USBH1_DATA2__USBH1_DATA2,
- MX51_PAD_USBH1_DATA3__USBH1_DATA3,
- MX51_PAD_USBH1_DATA4__USBH1_DATA4,
- MX51_PAD_USBH1_DATA5__USBH1_DATA5,
- MX51_PAD_USBH1_DATA6__USBH1_DATA6,
- MX51_PAD_USBH1_DATA7__USBH1_DATA7,
- MX51_PAD_USBH1_STP__USBH1_STP,
- MX51_PAD_EIM_CS3__GPIO2_28, /* PHY nRESET */
-
- /* FEC */
- MX51_PAD_EIM_DTACK__GPIO2_31, /* PHY nRESET */
-
- /* HSI2C */
- MX51_PAD_I2C1_CLK__GPIO4_16,
- MX51_PAD_I2C1_DAT__GPIO4_17,
-
- /* I2C1 */
- MX51_PAD_SD2_CMD__I2C1_SCL,
- MX51_PAD_SD2_CLK__I2C1_SDA,
-
- /* CAN */
- MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI,
- MX51_PAD_CSPI1_MISO__ECSPI1_MISO,
- MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK,
- MX51_PAD_CSPI1_SS0__GPIO4_24, /* nCS */
- MX51_PAD_CSI2_PIXCLK__GPIO4_15, /* nReset */
- MX51_PAD_GPIO1_1__GPIO1_1, /* IRQ */
- MX51_PAD_GPIO1_4__GPIO1_4, /* Control signals */
- MX51_PAD_GPIO1_6__GPIO1_6,
- MX51_PAD_GPIO1_7__GPIO1_7,
- MX51_PAD_GPIO1_8__GPIO1_8,
- MX51_PAD_GPIO1_9__GPIO1_9,
-
- /* Touchscreen */
- /* IRQ */
- NEW_PAD_CTRL(MX51_PAD_GPIO_NAND__GPIO_NAND, PAD_CTL_PUS_22K_UP |
- PAD_CTL_PKE | PAD_CTL_SRE_FAST |
- PAD_CTL_DSE_HIGH | PAD_CTL_PUE | PAD_CTL_HYS),
- NEW_PAD_CTRL(MX51_PAD_NANDF_D8__GPIO4_0, PAD_CTL_PUS_22K_UP |
- PAD_CTL_PKE | PAD_CTL_SRE_FAST |
- PAD_CTL_DSE_HIGH | PAD_CTL_PUE | PAD_CTL_HYS),
-};
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
- .flags = IMXUART_HAVE_RTSCTS,
-};
-
-static int tsc2007_get_pendown_state(struct device *dev)
-{
- if (mx51_revision() < IMX_CHIP_REVISION_3_0)
- return !gpio_get_value(TSC2007_IRQGPIO_REV2);
- else
- return !gpio_get_value(TSC2007_IRQGPIO_REV3);
-}
-
-static struct tsc2007_platform_data tsc2007_info = {
- .model = 2007,
- .x_plate_ohms = 180,
- .get_pendown_state = tsc2007_get_pendown_state,
-};
-
-static struct i2c_board_info eukrea_cpuimx51sd_i2c_devices[] = {
- {
- I2C_BOARD_INFO("pcf8563", 0x51),
- }, {
- I2C_BOARD_INFO("tsc2007", 0x49),
- .platform_data = &tsc2007_info,
- },
-};
-
-static const struct mxc_nand_platform_data
- eukrea_cpuimx51sd_nand_board_info __initconst = {
- .width = 1,
- .hw_ecc = 1,
- .flash_bbt = 1,
-};
-
-/* This function is board specific as the bit mask for the plldiv will also
-be different for other Freescale SoCs, thus a common bitmask is not
-possible and cannot get place in /plat-mxc/ehci.c.*/
-static int initialize_otg_port(struct platform_device *pdev)
-{
- u32 v;
- void __iomem *usb_base;
- void __iomem *usbother_base;
-
- usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
- if (!usb_base)
- return -ENOMEM;
- usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
-
- /* Set the PHY clock to 19.2MHz */
- v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
- v &= ~MX5_USB_UTMI_PHYCTRL1_PLLDIV_MASK;
- v |= MX51_USB_PLL_DIV_19_2_MHZ;
- __raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
- iounmap(usb_base);
-
- mdelay(10);
-
- return mx51_initialize_usb_hw(0, MXC_EHCI_INTERNAL_PHY);
-}
-
-static int initialize_usbh1_port(struct platform_device *pdev)
-{
- u32 v;
- void __iomem *usb_base;
- void __iomem *usbother_base;
-
- usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
- if (!usb_base)
- return -ENOMEM;
- usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
-
- /* The clock for the USBH1 ULPI port will come from the PHY. */
- v = __raw_readl(usbother_base + MX51_USB_CTRL_1_OFFSET);
- __raw_writel(v | MX51_USB_CTRL_UH1_EXT_CLK_EN,
- usbother_base + MX51_USB_CTRL_1_OFFSET);
- iounmap(usb_base);
-
- mdelay(10);
-
- return mx51_initialize_usb_hw(1, MXC_EHCI_POWER_PINS_ENABLED |
- MXC_EHCI_ITC_NO_THRESHOLD);
-}
-
-static const struct mxc_usbh_platform_data dr_utmi_config __initconst = {
- .init = initialize_otg_port,
- .portsc = MXC_EHCI_UTMI_16BIT,
-};
-
-static const struct fsl_usb2_platform_data usb_pdata __initconst = {
- .operating_mode = FSL_USB2_DR_DEVICE,
- .phy_mode = FSL_USB2_PHY_UTMI_WIDE,
-};
-
-static const struct mxc_usbh_platform_data usbh1_config __initconst = {
- .init = initialize_usbh1_port,
- .portsc = MXC_EHCI_MODE_ULPI,
-};
-
-static bool otg_mode_host __initdata;
-
-static int __init eukrea_cpuimx51sd_otg_mode(char *options)
-{
- if (!strcmp(options, "host"))
- otg_mode_host = true;
- else if (!strcmp(options, "device"))
- otg_mode_host = false;
- else
- pr_info("otg_mode neither \"host\" nor \"device\". "
- "Defaulting to device\n");
- return 1;
-}
-__setup("otg_mode=", eukrea_cpuimx51sd_otg_mode);
-
-static struct i2c_gpio_platform_data pdata = {
- .sda_pin = I2C_SDA,
- .sda_is_open_drain = 0,
- .scl_pin = I2C_SCL,
- .scl_is_open_drain = 0,
- .udelay = 2,
-};
-
-static struct platform_device hsi2c_gpio_device = {
- .name = "i2c-gpio",
- .id = 0,
- .dev.platform_data = &pdata,
-};
-
-static struct mcp251x_platform_data mcp251x_info = {
- .oscillator_frequency = 24E6,
-};
-
-static struct spi_board_info cpuimx51sd_spi_device[] = {
- {
- .modalias = "mcp2515",
- .max_speed_hz = 10000000,
- .bus_num = 0,
- .mode = SPI_MODE_0,
- .chip_select = 0,
- .platform_data = &mcp251x_info,
- /* irq number is run-time assigned */
- },
-};
-
-static int cpuimx51sd_spi1_cs[] = {
- CAN_NCS,
-};
-
-static const struct spi_imx_master cpuimx51sd_ecspi1_pdata __initconst = {
- .chipselect = cpuimx51sd_spi1_cs,
- .num_chipselect = ARRAY_SIZE(cpuimx51sd_spi1_cs),
-};
-
-static struct platform_device *rev2_platform_devices[] __initdata = {
- &hsi2c_gpio_device,
-};
-
-static const struct imxi2c_platform_data cpuimx51sd_i2c_data __initconst = {
- .bitrate = 100000,
-};
-
-static void __init eukrea_cpuimx51sd_init(void)
-{
- imx51_soc_init();
-
- mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx51sd_pads,
- ARRAY_SIZE(eukrea_cpuimx51sd_pads));
-
- imx51_add_imx_uart(0, &uart_pdata);
- imx51_add_mxc_nand(&eukrea_cpuimx51sd_nand_board_info);
- imx51_add_imx2_wdt(0);
-
- gpio_request(ETH_RST, "eth_rst");
- gpio_set_value(ETH_RST, 1);
- imx51_add_fec(NULL);
-
- gpio_request(CAN_IRQGPIO, "can_irq");
- gpio_direction_input(CAN_IRQGPIO);
- gpio_free(CAN_IRQGPIO);
- gpio_request(CAN_NCS, "can_ncs");
- gpio_direction_output(CAN_NCS, 1);
- gpio_free(CAN_NCS);
- gpio_request(CAN_RST, "can_rst");
- gpio_direction_output(CAN_RST, 0);
- msleep(20);
- gpio_set_value(CAN_RST, 1);
- imx51_add_ecspi(0, &cpuimx51sd_ecspi1_pdata);
- cpuimx51sd_spi_device[0].irq = gpio_to_irq(CAN_IRQGPIO);
- spi_register_board_info(cpuimx51sd_spi_device,
- ARRAY_SIZE(cpuimx51sd_spi_device));
-
- if (mx51_revision() < IMX_CHIP_REVISION_3_0) {
- eukrea_cpuimx51sd_i2c_devices[1].irq =
- gpio_to_irq(TSC2007_IRQGPIO_REV2),
- platform_add_devices(rev2_platform_devices,
- ARRAY_SIZE(rev2_platform_devices));
- gpio_request(TSC2007_IRQGPIO_REV2, "tsc2007_irq");
- gpio_direction_input(TSC2007_IRQGPIO_REV2);
- gpio_free(TSC2007_IRQGPIO_REV2);
- } else {
- eukrea_cpuimx51sd_i2c_devices[1].irq =
- gpio_to_irq(TSC2007_IRQGPIO_REV3),
- imx51_add_imx_i2c(0, &cpuimx51sd_i2c_data);
- gpio_request(TSC2007_IRQGPIO_REV3, "tsc2007_irq");
- gpio_direction_input(TSC2007_IRQGPIO_REV3);
- gpio_free(TSC2007_IRQGPIO_REV3);
- }
-
- i2c_register_board_info(0, eukrea_cpuimx51sd_i2c_devices,
- ARRAY_SIZE(eukrea_cpuimx51sd_i2c_devices));
-
- if (otg_mode_host)
- imx51_add_mxc_ehci_otg(&dr_utmi_config);
- else {
- initialize_otg_port(NULL);
- imx51_add_fsl_usb2_udc(&usb_pdata);
- }
-
- gpio_request(USBH1_RST, "usb_rst");
- gpio_direction_output(USBH1_RST, 0);
- msleep(20);
- gpio_set_value(USBH1_RST, 1);
- imx51_add_mxc_ehci_hs(1, &usbh1_config);
-
-#ifdef CONFIG_MACH_EUKREA_MBIMXSD51_BASEBOARD
- eukrea_mbimxsd51_baseboard_init();
-#endif
-}
-
-static void __init eukrea_cpuimx51sd_timer_init(void)
-{
- mx51_clocks_init(32768, 24000000, 22579200, 0);
-}
-
-MACHINE_START(EUKREA_CPUIMX51SD, "Eukrea CPUIMX51SD")
- /* Maintainer: Eric Bénard <eric@eukrea.com> */
- .atag_offset = 0x100,
- .map_io = mx51_map_io,
- .init_early = imx51_init_early,
- .init_irq = mx51_init_irq,
- .handle_irq = imx51_handle_irq,
- .init_time = eukrea_cpuimx51sd_timer_init,
- .init_machine = eukrea_cpuimx51sd_init,
- .init_late = imx51_init_late,
- .restart = mxc_restart,
-MACHINE_END
diff --git a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
index 4bf454424249..e978dda1434c 100644
--- a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
+++ b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
@@ -165,7 +165,6 @@ MACHINE_START(EUKREA_CPUIMX25SD, "Eukrea CPUIMX25")
.map_io = mx25_map_io,
.init_early = imx25_init_early,
.init_irq = mx25_init_irq,
- .handle_irq = imx25_handle_irq,
.init_time = eukrea_cpuimx25_timer_init,
.init_machine = eukrea_cpuimx25_init,
.restart = mxc_restart,
diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
index 97f9c6297fcf..b61bd8ed5568 100644
--- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
+++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
@@ -604,7 +604,6 @@ MACHINE_START(IMX27_VISSTRIM_M10, "Vista Silicon Visstrim_M10")
.map_io = mx27_map_io,
.init_early = imx27_init_early,
.init_irq = mx27_init_irq,
- .handle_irq = imx27_handle_irq,
.init_time = visstrim_m10_timer_init,
.init_machine = visstrim_m10_board_init,
.restart = mxc_restart,
diff --git a/arch/arm/mach-imx/mach-imx27ipcam.c b/arch/arm/mach-imx/mach-imx27ipcam.c
index 1a851aea6832..bb3ca0429680 100644
--- a/arch/arm/mach-imx/mach-imx27ipcam.c
+++ b/arch/arm/mach-imx/mach-imx27ipcam.c
@@ -71,7 +71,6 @@ MACHINE_START(IMX27IPCAM, "Freescale IMX27IPCAM")
.map_io = mx27_map_io,
.init_early = imx27_init_early,
.init_irq = mx27_init_irq,
- .handle_irq = imx27_handle_irq,
.init_time = mx27ipcam_timer_init,
.init_machine = mx27ipcam_init,
.restart = mxc_restart,
diff --git a/arch/arm/mach-imx/mach-imx27lite.c b/arch/arm/mach-imx/mach-imx27lite.c
index 3da2e3e44ce9..9992089d3ad1 100644
--- a/arch/arm/mach-imx/mach-imx27lite.c
+++ b/arch/arm/mach-imx/mach-imx27lite.c
@@ -77,7 +77,6 @@ MACHINE_START(IMX27LITE, "LogicPD i.MX27LITE")
.map_io = mx27_map_io,
.init_early = imx27_init_early,
.init_irq = mx27_init_irq,
- .handle_irq = imx27_handle_irq,
.init_time = mx27lite_timer_init,
.init_machine = mx27lite_init,
.restart = mxc_restart,
diff --git a/arch/arm/mach-imx/mach-imx50.c b/arch/arm/mach-imx/mach-imx50.c
index 77b77a92bb5d..b899c0b59afd 100644
--- a/arch/arm/mach-imx/mach-imx50.c
+++ b/arch/arm/mach-imx/mach-imx50.c
@@ -31,7 +31,6 @@ static const char *imx50_dt_board_compat[] __initconst = {
DT_MACHINE_START(IMX50_DT, "Freescale i.MX50 (Device Tree Support)")
.map_io = mx53_map_io,
.init_irq = mx53_init_irq,
- .handle_irq = imx50_handle_irq,
.init_machine = imx50_dt_init,
.dt_compat = imx50_dt_board_compat,
.restart = mxc_restart,
diff --git a/arch/arm/mach-imx/mach-imx53.c b/arch/arm/mach-imx/mach-imx53.c
index 65850908a4b4..2bad387956c0 100644
--- a/arch/arm/mach-imx/mach-imx53.c
+++ b/arch/arm/mach-imx/mach-imx53.c
@@ -40,7 +40,6 @@ DT_MACHINE_START(IMX53_DT, "Freescale i.MX53 (Device Tree Support)")
.map_io = mx53_map_io,
.init_early = imx53_init_early,
.init_irq = mx53_init_irq,
- .handle_irq = imx53_handle_irq,
.init_machine = imx53_dt_init,
.init_late = imx53_init_late,
.dt_compat = imx53_dt_board_compat,
diff --git a/arch/arm/mach-imx/mach-imx6sx.c b/arch/arm/mach-imx/mach-imx6sx.c
new file mode 100644
index 000000000000..02fccf6033ac
--- /dev/null
+++ b/arch/arm/mach-imx/mach-imx6sx.c
@@ -0,0 +1,51 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/irqchip.h>
+#include <linux/of_platform.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include "common.h"
+
+static void __init imx6sx_init_machine(void)
+{
+ struct device *parent;
+
+ mxc_arch_reset_init_dt();
+
+ parent = imx_soc_device_init();
+ if (parent == NULL)
+ pr_warn("failed to initialize soc device\n");
+
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, parent);
+
+ imx_anatop_init();
+}
+
+static void __init imx6sx_init_irq(void)
+{
+ imx_init_revision_from_anatop();
+ imx_init_l2cache();
+ imx_src_init();
+ imx_gpc_init();
+ irqchip_init();
+}
+
+static const char *imx6sx_dt_compat[] __initconst = {
+ "fsl,imx6sx",
+ NULL,
+};
+
+DT_MACHINE_START(IMX6SX, "Freescale i.MX6 SoloX (Device Tree)")
+ .map_io = debug_ll_io_init,
+ .init_irq = imx6sx_init_irq,
+ .init_machine = imx6sx_init_machine,
+ .dt_compat = imx6sx_dt_compat,
+ .restart = mxc_restart,
+MACHINE_END
diff --git a/arch/arm/mach-imx/mach-kzm_arm11_01.c b/arch/arm/mach-imx/mach-kzm_arm11_01.c
index c7bc41d6b468..31df4361996f 100644
--- a/arch/arm/mach-imx/mach-kzm_arm11_01.c
+++ b/arch/arm/mach-imx/mach-kzm_arm11_01.c
@@ -289,7 +289,6 @@ MACHINE_START(KZM_ARM11_01, "Kyoto Microcomputer Co., Ltd. KZM-ARM11-01")
.map_io = kzm_map_io,
.init_early = imx31_init_early,
.init_irq = mx31_init_irq,
- .handle_irq = imx31_handle_irq,
.init_time = kzm_timer_init,
.init_machine = kzm_board_init,
.restart = mxc_restart,
diff --git a/arch/arm/mach-imx/mach-mx1ads.c b/arch/arm/mach-imx/mach-mx1ads.c
index 9f883e4d6fc9..77fda3de4290 100644
--- a/arch/arm/mach-imx/mach-mx1ads.c
+++ b/arch/arm/mach-imx/mach-mx1ads.c
@@ -138,7 +138,6 @@ MACHINE_START(MX1ADS, "Freescale MX1ADS")
.map_io = mx1_map_io,
.init_early = imx1_init_early,
.init_irq = mx1_init_irq,
- .handle_irq = imx1_handle_irq,
.init_time = mx1ads_timer_init,
.init_machine = mx1ads_init,
.restart = mxc_restart,
@@ -149,7 +148,6 @@ MACHINE_START(MXLADS, "Freescale MXLADS")
.map_io = mx1_map_io,
.init_early = imx1_init_early,
.init_irq = mx1_init_irq,
- .handle_irq = imx1_handle_irq,
.init_time = mx1ads_timer_init,
.init_machine = mx1ads_init,
.restart = mxc_restart,
diff --git a/arch/arm/mach-imx/mach-mx21ads.c b/arch/arm/mach-imx/mach-mx21ads.c
index a06aa4dc37fc..703ce31d7379 100644
--- a/arch/arm/mach-imx/mach-mx21ads.c
+++ b/arch/arm/mach-imx/mach-mx21ads.c
@@ -17,51 +17,46 @@
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/physmap.h>
+#include <linux/basic_mmio_gpio.h>
#include <linux/gpio.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
#include "common.h"
#include "devices-imx21.h"
#include "hardware.h"
#include "iomux-mx21.h"
-/*
- * Memory-mapped I/O on MX21ADS base board
- */
-#define MX21ADS_MMIO_BASE_ADDR 0xf5000000
-#define MX21ADS_MMIO_SIZE 0xc00000
-
-#define MX21ADS_REG_ADDR(offset) (void __force __iomem *) \
- (MX21ADS_MMIO_BASE_ADDR + (offset))
+#define MX21ADS_CS8900A_REG (MX21_CS1_BASE_ADDR + 0x000000)
+#define MX21ADS_ST16C255_IOBASE_REG (MX21_CS1_BASE_ADDR + 0x200000)
+#define MX21ADS_VERSION_REG (MX21_CS1_BASE_ADDR + 0x400000)
+#define MX21ADS_IO_REG (MX21_CS1_BASE_ADDR + 0x800000)
-#define MX21ADS_CS8900A_MMIO_SIZE 0x200000
-#define MX21ADS_CS8900A_IRQ_GPIO IMX_GPIO_NR(5, 11)
-#define MX21ADS_ST16C255_IOBASE_REG MX21ADS_REG_ADDR(0x200000)
-#define MX21ADS_VERSION_REG MX21ADS_REG_ADDR(0x400000)
-#define MX21ADS_IO_REG MX21ADS_REG_ADDR(0x800000)
+#define MX21ADS_MMC_CD IMX_GPIO_NR(4, 25)
+#define MX21ADS_CS8900A_IRQ_GPIO IMX_GPIO_NR(5, 11)
+#define MX21ADS_MMGPIO_BASE (6 * 32)
/* MX21ADS_IO_REG bit definitions */
-#define MX21ADS_IO_SD_WP 0x0001 /* read */
-#define MX21ADS_IO_TP6 0x0001 /* write */
-#define MX21ADS_IO_SW_SEL 0x0002 /* read */
-#define MX21ADS_IO_TP7 0x0002 /* write */
-#define MX21ADS_IO_RESET_E_UART 0x0004
-#define MX21ADS_IO_RESET_BASE 0x0008
-#define MX21ADS_IO_CSI_CTL2 0x0010
-#define MX21ADS_IO_CSI_CTL1 0x0020
-#define MX21ADS_IO_CSI_CTL0 0x0040
-#define MX21ADS_IO_UART1_EN 0x0080
-#define MX21ADS_IO_UART4_EN 0x0100
-#define MX21ADS_IO_LCDON 0x0200
-#define MX21ADS_IO_IRDA_EN 0x0400
-#define MX21ADS_IO_IRDA_FIR_SEL 0x0800
-#define MX21ADS_IO_IRDA_MD0_B 0x1000
-#define MX21ADS_IO_IRDA_MD1 0x2000
-#define MX21ADS_IO_LED4_ON 0x4000
-#define MX21ADS_IO_LED3_ON 0x8000
+#define MX21ADS_IO_SD_WP (MX21ADS_MMGPIO_BASE + 0)
+#define MX21ADS_IO_TP6 (MX21ADS_IO_SD_WP)
+#define MX21ADS_IO_SW_SEL (MX21ADS_MMGPIO_BASE + 1)
+#define MX21ADS_IO_TP7 (MX21ADS_IO_SW_SEL)
+#define MX21ADS_IO_RESET_E_UART (MX21ADS_MMGPIO_BASE + 2)
+#define MX21ADS_IO_RESET_BASE (MX21ADS_MMGPIO_BASE + 3)
+#define MX21ADS_IO_CSI_CTL2 (MX21ADS_MMGPIO_BASE + 4)
+#define MX21ADS_IO_CSI_CTL1 (MX21ADS_MMGPIO_BASE + 5)
+#define MX21ADS_IO_CSI_CTL0 (MX21ADS_MMGPIO_BASE + 6)
+#define MX21ADS_IO_UART1_EN (MX21ADS_MMGPIO_BASE + 7)
+#define MX21ADS_IO_UART4_EN (MX21ADS_MMGPIO_BASE + 8)
+#define MX21ADS_IO_LCDON (MX21ADS_MMGPIO_BASE + 9)
+#define MX21ADS_IO_IRDA_EN (MX21ADS_MMGPIO_BASE + 10)
+#define MX21ADS_IO_IRDA_FIR_SEL (MX21ADS_MMGPIO_BASE + 11)
+#define MX21ADS_IO_IRDA_MD0_B (MX21ADS_MMGPIO_BASE + 12)
+#define MX21ADS_IO_IRDA_MD1 (MX21ADS_MMGPIO_BASE + 13)
+#define MX21ADS_IO_LED4_ON (MX21ADS_MMGPIO_BASE + 14)
+#define MX21ADS_IO_LED3_ON (MX21ADS_MMGPIO_BASE + 15)
static const int mx21ads_pins[] __initconst = {
@@ -143,11 +138,8 @@ static struct physmap_flash_data mx21ads_flash_data = {
.width = 4,
};
-static struct resource mx21ads_flash_resource = {
- .start = MX21_CS0_BASE_ADDR,
- .end = MX21_CS0_BASE_ADDR + 0x02000000 - 1,
- .flags = IORESOURCE_MEM,
-};
+static struct resource mx21ads_flash_resource =
+ DEFINE_RES_MEM(MX21_CS0_BASE_ADDR, SZ_32M);
static struct platform_device mx21ads_nor_mtd_device = {
.name = "physmap-flash",
@@ -160,7 +152,7 @@ static struct platform_device mx21ads_nor_mtd_device = {
};
static struct resource mx21ads_cs8900_resources[] __initdata = {
- DEFINE_RES_MEM(MX21_CS1_BASE_ADDR, MX21ADS_CS8900A_MMIO_SIZE),
+ DEFINE_RES_MEM(MX21ADS_CS8900A_REG, SZ_1K),
/* irq number is run-time assigned */
DEFINE_RES_IRQ(-1),
};
@@ -179,24 +171,50 @@ static const struct imxuart_platform_data uart_pdata_rts __initconst = {
static const struct imxuart_platform_data uart_pdata_norts __initconst = {
};
-static int mx21ads_fb_init(struct platform_device *pdev)
-{
- u16 tmp;
+static struct resource mx21ads_mmgpio_resource =
+ DEFINE_RES_MEM_NAMED(MX21ADS_IO_REG, SZ_2, "dat");
- tmp = __raw_readw(MX21ADS_IO_REG);
- tmp |= MX21ADS_IO_LCDON;
- __raw_writew(tmp, MX21ADS_IO_REG);
- return 0;
-}
+static struct bgpio_pdata mx21ads_mmgpio_pdata = {
+ .base = MX21ADS_MMGPIO_BASE,
+ .ngpio = 16,
+};
-static void mx21ads_fb_exit(struct platform_device *pdev)
-{
- u16 tmp;
+static struct platform_device mx21ads_mmgpio = {
+ .name = "basic-mmio-gpio",
+ .id = PLATFORM_DEVID_AUTO,
+ .resource = &mx21ads_mmgpio_resource,
+ .num_resources = 1,
+ .dev = {
+ .platform_data = &mx21ads_mmgpio_pdata,
+ },
+};
- tmp = __raw_readw(MX21ADS_IO_REG);
- tmp &= ~MX21ADS_IO_LCDON;
- __raw_writew(tmp, MX21ADS_IO_REG);
-}
+static struct regulator_consumer_supply mx21ads_lcd_regulator_consumer =
+ REGULATOR_SUPPLY("lcd", "imx-fb.0");
+
+static struct regulator_init_data mx21ads_lcd_regulator_init_data = {
+ .constraints = {
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ .consumer_supplies = &mx21ads_lcd_regulator_consumer,
+ .num_consumer_supplies = 1,
+};
+
+static struct fixed_voltage_config mx21ads_lcd_regulator_pdata = {
+ .supply_name = "LCD",
+ .microvolts = 3300000,
+ .gpio = MX21ADS_IO_LCDON,
+ .enable_high = 1,
+ .init_data = &mx21ads_lcd_regulator_init_data,
+};
+
+static struct platform_device mx21ads_lcd_regulator = {
+ .name = "reg-fixed-voltage",
+ .id = PLATFORM_DEVID_AUTO,
+ .dev = {
+ .platform_data = &mx21ads_lcd_regulator_pdata,
+ },
+};
/*
* Connected is a portrait Sharp-QVGA display
@@ -229,26 +247,30 @@ static const struct imx_fb_platform_data mx21ads_fb_data __initconst = {
.pwmr = 0x00a903ff,
.lscr1 = 0x00120300,
.dmacr = 0x00020008,
-
- .init = mx21ads_fb_init,
- .exit = mx21ads_fb_exit,
};
static int mx21ads_sdhc_get_ro(struct device *dev)
{
- return (__raw_readw(MX21ADS_IO_REG) & MX21ADS_IO_SD_WP) ? 1 : 0;
+ return gpio_get_value(MX21ADS_IO_SD_WP);
}
static int mx21ads_sdhc_init(struct device *dev, irq_handler_t detect_irq,
void *data)
{
- return request_irq(gpio_to_irq(IMX_GPIO_NR(4, 25)), detect_irq,
- IRQF_TRIGGER_FALLING, "mmc-detect", data);
+ int ret;
+
+ ret = gpio_request(MX21ADS_IO_SD_WP, "mmc-ro");
+ if (ret)
+ return ret;
+
+ return request_irq(gpio_to_irq(MX21ADS_MMC_CD), detect_irq,
+ IRQF_TRIGGER_FALLING, "mmc-detect", data);
}
static void mx21ads_sdhc_exit(struct device *dev, void *data)
{
- free_irq(gpio_to_irq(IMX_GPIO_NR(4, 25)), data);
+ free_irq(gpio_to_irq(MX21ADS_MMC_CD), data);
+ gpio_free(MX21ADS_IO_SD_WP);
}
static const struct imxmmc_platform_data mx21ads_sdhc_pdata __initconst = {
@@ -264,29 +286,9 @@ mx21ads_nand_board_info __initconst = {
.hw_ecc = 1,
};
-static struct map_desc mx21ads_io_desc[] __initdata = {
- /*
- * Memory-mapped I/O on MX21ADS Base board:
- * - CS8900A Ethernet controller
- * - ST16C2552CJ UART
- * - CPU and Base board version
- * - Base board I/O register
- */
- {
- .virtual = MX21ADS_MMIO_BASE_ADDR,
- .pfn = __phys_to_pfn(MX21_CS1_BASE_ADDR),
- .length = MX21ADS_MMIO_SIZE,
- .type = MT_DEVICE,
- },
-};
-
-static void __init mx21ads_map_io(void)
-{
- mx21_map_io();
- iotable_init(mx21ads_io_desc, ARRAY_SIZE(mx21ads_io_desc));
-}
-
static struct platform_device *platform_devices[] __initdata = {
+ &mx21ads_mmgpio,
+ &mx21ads_lcd_regulator,
&mx21ads_nor_mtd_device,
};
@@ -300,12 +302,13 @@ static void __init mx21ads_board_init(void)
imx21_add_imx_uart0(&uart_pdata_rts);
imx21_add_imx_uart2(&uart_pdata_norts);
imx21_add_imx_uart3(&uart_pdata_rts);
- imx21_add_imx_fb(&mx21ads_fb_data);
imx21_add_mxc_mmc(0, &mx21ads_sdhc_pdata);
imx21_add_mxc_nand(&mx21ads_nand_board_info);
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+ imx21_add_imx_fb(&mx21ads_fb_data);
+
mx21ads_cs8900_resources[1].start =
gpio_to_irq(MX21ADS_CS8900A_IRQ_GPIO);
mx21ads_cs8900_resources[1].end =
@@ -321,10 +324,9 @@ static void __init mx21ads_timer_init(void)
MACHINE_START(MX21ADS, "Freescale i.MX21ADS")
/* maintainer: Freescale Semiconductor, Inc. */
.atag_offset = 0x100,
- .map_io = mx21ads_map_io,
+ .map_io = mx21_map_io,
.init_early = imx21_init_early,
.init_irq = mx21_init_irq,
- .handle_irq = imx21_handle_irq,
.init_time = mx21ads_timer_init,
.init_machine = mx21ads_board_init,
.restart = mxc_restart,
diff --git a/arch/arm/mach-imx/mach-mx25_3ds.c b/arch/arm/mach-imx/mach-mx25_3ds.c
index 13490c203050..ea1fa199c148 100644
--- a/arch/arm/mach-imx/mach-mx25_3ds.c
+++ b/arch/arm/mach-imx/mach-mx25_3ds.c
@@ -263,7 +263,6 @@ MACHINE_START(MX25_3DS, "Freescale MX25PDK (3DS)")
.map_io = mx25_map_io,
.init_early = imx25_init_early,
.init_irq = mx25_init_irq,
- .handle_irq = imx25_handle_irq,
.init_time = mx25pdk_timer_init,
.init_machine = mx25pdk_init,
.restart = mxc_restart,
diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c
index 25b3e4c9bc0a..435a5428a678 100644
--- a/arch/arm/mach-imx/mach-mx27_3ds.c
+++ b/arch/arm/mach-imx/mach-mx27_3ds.c
@@ -544,7 +544,6 @@ MACHINE_START(MX27_3DS, "Freescale MX27PDK")
.map_io = mx27_map_io,
.init_early = imx27_init_early,
.init_irq = mx27_init_irq,
- .handle_irq = imx27_handle_irq,
.init_time = mx27pdk_timer_init,
.init_machine = mx27pdk_init,
.restart = mxc_restart,
diff --git a/arch/arm/mach-imx/mach-mx27ads.c b/arch/arm/mach-imx/mach-mx27ads.c
index a7a4a9c67615..2f834ce8f39c 100644
--- a/arch/arm/mach-imx/mach-mx27ads.c
+++ b/arch/arm/mach-imx/mach-mx27ads.c
@@ -391,7 +391,6 @@ MACHINE_START(MX27ADS, "Freescale i.MX27ADS")
.map_io = mx27ads_map_io,
.init_early = imx27_init_early,
.init_irq = mx27_init_irq,
- .handle_irq = imx27_handle_irq,
.init_time = mx27ads_timer_init,
.init_machine = mx27ads_board_init,
.restart = mxc_restart,
diff --git a/arch/arm/mach-imx/mach-mx31_3ds.c b/arch/arm/mach-imx/mach-mx31_3ds.c
index 50044a21b388..4217871a9653 100644
--- a/arch/arm/mach-imx/mach-mx31_3ds.c
+++ b/arch/arm/mach-imx/mach-mx31_3ds.c
@@ -775,7 +775,6 @@ MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)")
.map_io = mx31_map_io,
.init_early = imx31_init_early,
.init_irq = mx31_init_irq,
- .handle_irq = imx31_handle_irq,
.init_time = mx31_3ds_timer_init,
.init_machine = mx31_3ds_init,
.reserve = mx31_3ds_reserve,
diff --git a/arch/arm/mach-imx/mach-mx31ads.c b/arch/arm/mach-imx/mach-mx31ads.c
index daf8889125cc..d08c37c696f6 100644
--- a/arch/arm/mach-imx/mach-mx31ads.c
+++ b/arch/arm/mach-imx/mach-mx31ads.c
@@ -582,7 +582,6 @@ MACHINE_START(MX31ADS, "Freescale MX31ADS")
.map_io = mx31ads_map_io,
.init_early = imx31_init_early,
.init_irq = mx31ads_init_irq,
- .handle_irq = imx31_handle_irq,
.init_time = mx31ads_timer_init,
.init_machine = mx31ads_init,
.restart = mxc_restart,
diff --git a/arch/arm/mach-imx/mach-mx31lilly.c b/arch/arm/mach-imx/mach-mx31lilly.c
index 832b1e2f964e..eee042fa2768 100644
--- a/arch/arm/mach-imx/mach-mx31lilly.c
+++ b/arch/arm/mach-imx/mach-mx31lilly.c
@@ -308,7 +308,6 @@ MACHINE_START(LILLY1131, "INCO startec LILLY-1131")
.map_io = mx31_map_io,
.init_early = imx31_init_early,
.init_irq = mx31_init_irq,
- .handle_irq = imx31_handle_irq,
.init_time = mx31lilly_timer_init,
.init_machine = mx31lilly_board_init,
.restart = mxc_restart,
diff --git a/arch/arm/mach-imx/mach-mx31lite.c b/arch/arm/mach-imx/mach-mx31lite.c
index bea07299b61a..fa15d0b6118d 100644
--- a/arch/arm/mach-imx/mach-mx31lite.c
+++ b/arch/arm/mach-imx/mach-mx31lite.c
@@ -291,7 +291,6 @@ MACHINE_START(MX31LITE, "LogicPD i.MX31 SOM")
.map_io = mx31lite_map_io,
.init_early = imx31_init_early,
.init_irq = mx31_init_irq,
- .handle_irq = imx31_handle_irq,
.init_time = mx31lite_timer_init,
.init_machine = mx31lite_init,
.restart = mxc_restart,
diff --git a/arch/arm/mach-imx/mach-mx31moboard.c b/arch/arm/mach-imx/mach-mx31moboard.c
index 8f45afe785f8..08730f238449 100644
--- a/arch/arm/mach-imx/mach-mx31moboard.c
+++ b/arch/arm/mach-imx/mach-mx31moboard.c
@@ -600,7 +600,6 @@ MACHINE_START(MX31MOBOARD, "EPFL Mobots mx31moboard")
.map_io = mx31_map_io,
.init_early = imx31_init_early,
.init_irq = mx31_init_irq,
- .handle_irq = imx31_handle_irq,
.init_time = mx31moboard_timer_init,
.init_machine = mx31moboard_init,
.restart = mxc_restart,
diff --git a/arch/arm/mach-imx/mach-mx35_3ds.c b/arch/arm/mach-imx/mach-mx35_3ds.c
index a42f4f07051f..4e8b184d773b 100644
--- a/arch/arm/mach-imx/mach-mx35_3ds.c
+++ b/arch/arm/mach-imx/mach-mx35_3ds.c
@@ -615,7 +615,6 @@ MACHINE_START(MX35_3DS, "Freescale MX35PDK")
.map_io = mx35_map_io,
.init_early = imx35_init_early,
.init_irq = mx35_init_irq,
- .handle_irq = imx35_handle_irq,
.init_time = mx35pdk_timer_init,
.init_machine = mx35_3ds_init,
.reserve = mx35_3ds_reserve,
diff --git a/arch/arm/mach-imx/mach-mx51_babbage.c b/arch/arm/mach-imx/mach-mx51_babbage.c
deleted file mode 100644
index f3d264a636fa..000000000000
--- a/arch/arm/mach-imx/mach-mx51_babbage.c
+++ /dev/null
@@ -1,428 +0,0 @@
-/*
- * Copyright 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/gpio.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/input.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/spi.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include "common.h"
-#include "devices-imx51.h"
-#include "hardware.h"
-#include "iomux-mx51.h"
-
-#define BABBAGE_USB_HUB_RESET IMX_GPIO_NR(1, 7)
-#define BABBAGE_USBH1_STP IMX_GPIO_NR(1, 27)
-#define BABBAGE_USB_PHY_RESET IMX_GPIO_NR(2, 5)
-#define BABBAGE_FEC_PHY_RESET IMX_GPIO_NR(2, 14)
-#define BABBAGE_POWER_KEY IMX_GPIO_NR(2, 21)
-#define BABBAGE_ECSPI1_CS0 IMX_GPIO_NR(4, 24)
-#define BABBAGE_ECSPI1_CS1 IMX_GPIO_NR(4, 25)
-#define BABBAGE_SD2_CD IMX_GPIO_NR(1, 6)
-#define BABBAGE_SD2_WP IMX_GPIO_NR(1, 5)
-
-/* USB_CTRL_1 */
-#define MX51_USB_CTRL_1_OFFSET 0x10
-#define MX51_USB_CTRL_UH1_EXT_CLK_EN (1 << 25)
-
-#define MX51_USB_PLLDIV_12_MHZ 0x00
-#define MX51_USB_PLL_DIV_19_2_MHZ 0x01
-#define MX51_USB_PLL_DIV_24_MHZ 0x02
-
-static struct gpio_keys_button babbage_buttons[] = {
- {
- .gpio = BABBAGE_POWER_KEY,
- .code = BTN_0,
- .desc = "PWR",
- .active_low = 1,
- .wakeup = 1,
- },
-};
-
-static const struct gpio_keys_platform_data imx_button_data __initconst = {
- .buttons = babbage_buttons,
- .nbuttons = ARRAY_SIZE(babbage_buttons),
-};
-
-static iomux_v3_cfg_t mx51babbage_pads[] = {
- /* UART1 */
- MX51_PAD_UART1_RXD__UART1_RXD,
- MX51_PAD_UART1_TXD__UART1_TXD,
- MX51_PAD_UART1_RTS__UART1_RTS,
- MX51_PAD_UART1_CTS__UART1_CTS,
-
- /* UART2 */
- MX51_PAD_UART2_RXD__UART2_RXD,
- MX51_PAD_UART2_TXD__UART2_TXD,
-
- /* UART3 */
- MX51_PAD_EIM_D25__UART3_RXD,
- MX51_PAD_EIM_D26__UART3_TXD,
- MX51_PAD_EIM_D27__UART3_RTS,
- MX51_PAD_EIM_D24__UART3_CTS,
-
- /* I2C1 */
- MX51_PAD_EIM_D16__I2C1_SDA,
- MX51_PAD_EIM_D19__I2C1_SCL,
-
- /* I2C2 */
- MX51_PAD_KEY_COL4__I2C2_SCL,
- MX51_PAD_KEY_COL5__I2C2_SDA,
-
- /* HSI2C */
- MX51_PAD_I2C1_CLK__I2C1_CLK,
- MX51_PAD_I2C1_DAT__I2C1_DAT,
-
- /* USB HOST1 */
- MX51_PAD_USBH1_CLK__USBH1_CLK,
- MX51_PAD_USBH1_DIR__USBH1_DIR,
- MX51_PAD_USBH1_NXT__USBH1_NXT,
- MX51_PAD_USBH1_DATA0__USBH1_DATA0,
- MX51_PAD_USBH1_DATA1__USBH1_DATA1,
- MX51_PAD_USBH1_DATA2__USBH1_DATA2,
- MX51_PAD_USBH1_DATA3__USBH1_DATA3,
- MX51_PAD_USBH1_DATA4__USBH1_DATA4,
- MX51_PAD_USBH1_DATA5__USBH1_DATA5,
- MX51_PAD_USBH1_DATA6__USBH1_DATA6,
- MX51_PAD_USBH1_DATA7__USBH1_DATA7,
-
- /* USB HUB reset line*/
- MX51_PAD_GPIO1_7__GPIO1_7,
-
- /* USB PHY reset line */
- MX51_PAD_EIM_D21__GPIO2_5,
-
- /* FEC */
- MX51_PAD_EIM_EB2__FEC_MDIO,
- MX51_PAD_EIM_EB3__FEC_RDATA1,
- MX51_PAD_EIM_CS2__FEC_RDATA2,
- MX51_PAD_EIM_CS3__FEC_RDATA3,
- MX51_PAD_EIM_CS4__FEC_RX_ER,
- MX51_PAD_EIM_CS5__FEC_CRS,
- MX51_PAD_NANDF_RB2__FEC_COL,
- MX51_PAD_NANDF_RB3__FEC_RX_CLK,
- MX51_PAD_NANDF_D9__FEC_RDATA0,
- MX51_PAD_NANDF_D8__FEC_TDATA0,
- MX51_PAD_NANDF_CS2__FEC_TX_ER,
- MX51_PAD_NANDF_CS3__FEC_MDC,
- MX51_PAD_NANDF_CS4__FEC_TDATA1,
- MX51_PAD_NANDF_CS5__FEC_TDATA2,
- MX51_PAD_NANDF_CS6__FEC_TDATA3,
- MX51_PAD_NANDF_CS7__FEC_TX_EN,
- MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK,
-
- /* FEC PHY reset line */
- MX51_PAD_EIM_A20__GPIO2_14,
-
- /* SD 1 */
- MX51_PAD_SD1_CMD__SD1_CMD,
- MX51_PAD_SD1_CLK__SD1_CLK,
- MX51_PAD_SD1_DATA0__SD1_DATA0,
- MX51_PAD_SD1_DATA1__SD1_DATA1,
- MX51_PAD_SD1_DATA2__SD1_DATA2,
- MX51_PAD_SD1_DATA3__SD1_DATA3,
- /* CD/WP from controller */
- MX51_PAD_GPIO1_0__SD1_CD,
- MX51_PAD_GPIO1_1__SD1_WP,
-
- /* SD 2 */
- MX51_PAD_SD2_CMD__SD2_CMD,
- MX51_PAD_SD2_CLK__SD2_CLK,
- MX51_PAD_SD2_DATA0__SD2_DATA0,
- MX51_PAD_SD2_DATA1__SD2_DATA1,
- MX51_PAD_SD2_DATA2__SD2_DATA2,
- MX51_PAD_SD2_DATA3__SD2_DATA3,
- /* CD/WP gpio */
- MX51_PAD_GPIO1_6__GPIO1_6,
- MX51_PAD_GPIO1_5__GPIO1_5,
-
- /* eCSPI1 */
- MX51_PAD_CSPI1_MISO__ECSPI1_MISO,
- MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI,
- MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK,
- MX51_PAD_CSPI1_SS0__GPIO4_24,
- MX51_PAD_CSPI1_SS1__GPIO4_25,
-
- /* Audio */
- MX51_PAD_AUD3_BB_TXD__AUD3_TXD,
- MX51_PAD_AUD3_BB_RXD__AUD3_RXD,
- MX51_PAD_AUD3_BB_CK__AUD3_TXC,
- MX51_PAD_AUD3_BB_FS__AUD3_TXFS,
-};
-
-/* Serial ports */
-static const struct imxuart_platform_data uart_pdata __initconst = {
- .flags = IMXUART_HAVE_RTSCTS,
-};
-
-static const struct imxi2c_platform_data babbage_i2c_data __initconst = {
- .bitrate = 100000,
-};
-
-static const struct imxi2c_platform_data babbage_hsi2c_data __initconst = {
- .bitrate = 400000,
-};
-
-static struct gpio mx51_babbage_usbh1_gpios[] = {
- { BABBAGE_USBH1_STP, GPIOF_OUT_INIT_LOW, "usbh1_stp" },
- { BABBAGE_USB_PHY_RESET, GPIOF_OUT_INIT_LOW, "usbh1_phy_reset" },
-};
-
-static int gpio_usbh1_active(void)
-{
- iomux_v3_cfg_t usbh1stp_gpio = MX51_PAD_USBH1_STP__GPIO1_27;
- int ret;
-
- /* Set USBH1_STP to GPIO and toggle it */
- mxc_iomux_v3_setup_pad(usbh1stp_gpio);
- ret = gpio_request_array(mx51_babbage_usbh1_gpios,
- ARRAY_SIZE(mx51_babbage_usbh1_gpios));
-
- if (ret) {
- pr_debug("failed to get USBH1 pins: %d\n", ret);
- return ret;
- }
-
- msleep(100);
- gpio_set_value(BABBAGE_USBH1_STP, 1);
- gpio_set_value(BABBAGE_USB_PHY_RESET, 1);
- gpio_free_array(mx51_babbage_usbh1_gpios,
- ARRAY_SIZE(mx51_babbage_usbh1_gpios));
- return 0;
-}
-
-static inline void babbage_usbhub_reset(void)
-{
- int ret;
-
- /* Reset USB hub */
- ret = gpio_request_one(BABBAGE_USB_HUB_RESET,
- GPIOF_OUT_INIT_LOW, "GPIO1_7");
- if (ret) {
- printk(KERN_ERR"failed to get GPIO_USB_HUB_RESET: %d\n", ret);
- return;
- }
-
- msleep(2);
- /* Deassert reset */
- gpio_set_value(BABBAGE_USB_HUB_RESET, 1);
-}
-
-static inline void babbage_fec_reset(void)
-{
- int ret;
-
- /* reset FEC PHY */
- ret = gpio_request_one(BABBAGE_FEC_PHY_RESET,
- GPIOF_OUT_INIT_LOW, "fec-phy-reset");
- if (ret) {
- printk(KERN_ERR"failed to get GPIO_FEC_PHY_RESET: %d\n", ret);
- return;
- }
- msleep(1);
- gpio_set_value(BABBAGE_FEC_PHY_RESET, 1);
-}
-
-/* This function is board specific as the bit mask for the plldiv will also
-be different for other Freescale SoCs, thus a common bitmask is not
-possible and cannot get place in /plat-mxc/ehci.c.*/
-static int initialize_otg_port(struct platform_device *pdev)
-{
- u32 v;
- void __iomem *usb_base;
- void __iomem *usbother_base;
-
- usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
- if (!usb_base)
- return -ENOMEM;
- usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
-
- /* Set the PHY clock to 19.2MHz */
- v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
- v &= ~MX5_USB_UTMI_PHYCTRL1_PLLDIV_MASK;
- v |= MX51_USB_PLL_DIV_19_2_MHZ;
- __raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
- iounmap(usb_base);
-
- mdelay(10);
-
- return mx51_initialize_usb_hw(0, MXC_EHCI_INTERNAL_PHY);
-}
-
-static int initialize_usbh1_port(struct platform_device *pdev)
-{
- u32 v;
- void __iomem *usb_base;
- void __iomem *usbother_base;
-
- usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
- if (!usb_base)
- return -ENOMEM;
- usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
-
- /* The clock for the USBH1 ULPI port will come externally from the PHY. */
- v = __raw_readl(usbother_base + MX51_USB_CTRL_1_OFFSET);
- __raw_writel(v | MX51_USB_CTRL_UH1_EXT_CLK_EN, usbother_base + MX51_USB_CTRL_1_OFFSET);
- iounmap(usb_base);
-
- mdelay(10);
-
- return mx51_initialize_usb_hw(1, MXC_EHCI_POWER_PINS_ENABLED |
- MXC_EHCI_ITC_NO_THRESHOLD);
-}
-
-static const struct mxc_usbh_platform_data dr_utmi_config __initconst = {
- .init = initialize_otg_port,
- .portsc = MXC_EHCI_UTMI_16BIT,
-};
-
-static const struct fsl_usb2_platform_data usb_pdata __initconst = {
- .operating_mode = FSL_USB2_DR_DEVICE,
- .phy_mode = FSL_USB2_PHY_UTMI_WIDE,
-};
-
-static const struct mxc_usbh_platform_data usbh1_config __initconst = {
- .init = initialize_usbh1_port,
- .portsc = MXC_EHCI_MODE_ULPI,
-};
-
-static bool otg_mode_host __initdata;
-
-static int __init babbage_otg_mode(char *options)
-{
- if (!strcmp(options, "host"))
- otg_mode_host = true;
- else if (!strcmp(options, "device"))
- otg_mode_host = false;
- else
- pr_info("otg_mode neither \"host\" nor \"device\". "
- "Defaulting to device\n");
- return 1;
-}
-__setup("otg_mode=", babbage_otg_mode);
-
-static struct spi_board_info mx51_babbage_spi_board_info[] __initdata = {
- {
- .modalias = "mtd_dataflash",
- .max_speed_hz = 25000000,
- .bus_num = 0,
- .chip_select = 1,
- .mode = SPI_MODE_0,
- .platform_data = NULL,
- },
-};
-
-static int mx51_babbage_spi_cs[] = {
- BABBAGE_ECSPI1_CS0,
- BABBAGE_ECSPI1_CS1,
-};
-
-static const struct spi_imx_master mx51_babbage_spi_pdata __initconst = {
- .chipselect = mx51_babbage_spi_cs,
- .num_chipselect = ARRAY_SIZE(mx51_babbage_spi_cs),
-};
-
-static const struct esdhc_platform_data mx51_babbage_sd1_data __initconst = {
- .cd_type = ESDHC_CD_CONTROLLER,
- .wp_type = ESDHC_WP_CONTROLLER,
-};
-
-static const struct esdhc_platform_data mx51_babbage_sd2_data __initconst = {
- .cd_gpio = BABBAGE_SD2_CD,
- .wp_gpio = BABBAGE_SD2_WP,
- .cd_type = ESDHC_CD_GPIO,
- .wp_type = ESDHC_WP_GPIO,
-};
-
-void __init imx51_babbage_common_init(void)
-{
- mxc_iomux_v3_setup_multiple_pads(mx51babbage_pads,
- ARRAY_SIZE(mx51babbage_pads));
-}
-
-/*
- * Board specific initialization.
- */
-static void __init mx51_babbage_init(void)
-{
- iomux_v3_cfg_t usbh1stp = MX51_PAD_USBH1_STP__USBH1_STP;
- iomux_v3_cfg_t power_key = NEW_PAD_CTRL(MX51_PAD_EIM_A27__GPIO2_21,
- PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH);
-
- imx51_soc_init();
-
- imx51_babbage_common_init();
-
- imx51_add_imx_uart(0, &uart_pdata);
- imx51_add_imx_uart(1, NULL);
- imx51_add_imx_uart(2, &uart_pdata);
-
- babbage_fec_reset();
- imx51_add_fec(NULL);
-
- /* Set the PAD settings for the pwr key. */
- mxc_iomux_v3_setup_pad(power_key);
- imx_add_gpio_keys(&imx_button_data);
-
- imx51_add_imx_i2c(0, &babbage_i2c_data);
- imx51_add_imx_i2c(1, &babbage_i2c_data);
- imx51_add_hsi2c(&babbage_hsi2c_data);
-
- if (otg_mode_host)
- imx51_add_mxc_ehci_otg(&dr_utmi_config);
- else {
- initialize_otg_port(NULL);
- imx51_add_fsl_usb2_udc(&usb_pdata);
- }
-
- gpio_usbh1_active();
- imx51_add_mxc_ehci_hs(1, &usbh1_config);
- /* setback USBH1_STP to be function */
- mxc_iomux_v3_setup_pad(usbh1stp);
- babbage_usbhub_reset();
-
- imx51_add_sdhci_esdhc_imx(0, &mx51_babbage_sd1_data);
- imx51_add_sdhci_esdhc_imx(1, &mx51_babbage_sd2_data);
-
- spi_register_board_info(mx51_babbage_spi_board_info,
- ARRAY_SIZE(mx51_babbage_spi_board_info));
- imx51_add_ecspi(0, &mx51_babbage_spi_pdata);
- imx51_add_imx2_wdt(0);
-}
-
-static void __init mx51_babbage_timer_init(void)
-{
- mx51_clocks_init(32768, 24000000, 22579200, 0);
-}
-
-MACHINE_START(MX51_BABBAGE, "Freescale MX51 Babbage Board")
- /* Maintainer: Amit Kucheria <amit.kucheria@canonical.com> */
- .atag_offset = 0x100,
- .map_io = mx51_map_io,
- .init_early = imx51_init_early,
- .init_irq = mx51_init_irq,
- .handle_irq = imx51_handle_irq,
- .init_time = mx51_babbage_timer_init,
- .init_machine = mx51_babbage_init,
- .init_late = imx51_init_late,
- .restart = mxc_restart,
-MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mxt_td60.c b/arch/arm/mach-imx/mach-mxt_td60.c
index c91894003da9..0b5d1ca31b9f 100644
--- a/arch/arm/mach-imx/mach-mxt_td60.c
+++ b/arch/arm/mach-imx/mach-mxt_td60.c
@@ -267,7 +267,6 @@ MACHINE_START(MXT_TD60, "Maxtrack i-MXT TD60")
.map_io = mx27_map_io,
.init_early = imx27_init_early,
.init_irq = mx27_init_irq,
- .handle_irq = imx27_handle_irq,
.init_time = mxt_td60_timer_init,
.init_machine = mxt_td60_board_init,
.restart = mxc_restart,
diff --git a/arch/arm/mach-imx/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c
index bf3ac51d5aca..12212378c672 100644
--- a/arch/arm/mach-imx/mach-pca100.c
+++ b/arch/arm/mach-imx/mach-pca100.c
@@ -245,8 +245,7 @@ static int pca100_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
int ret;
ret = request_irq(gpio_to_irq(IMX_GPIO_NR(3, 29)), detect_irq,
- IRQF_DISABLED | IRQF_TRIGGER_FALLING,
- "imx-mmc-detect", data);
+ IRQF_TRIGGER_FALLING, "imx-mmc-detect", data);
if (ret)
printk(KERN_ERR
"pca100: Failed to request irq for sd/mmc detection\n");
@@ -421,7 +420,6 @@ MACHINE_START(PCA100, "phyCARD-i.MX27")
.map_io = mx27_map_io,
.init_early = imx27_init_early,
.init_irq = mx27_init_irq,
- .handle_irq = imx27_handle_irq,
.init_machine = pca100_init,
.init_time = pca100_timer_init,
.restart = mxc_restart,
diff --git a/arch/arm/mach-imx/mach-pcm037.c b/arch/arm/mach-imx/mach-pcm037.c
index 639a3dfb0092..81b8affb9448 100644
--- a/arch/arm/mach-imx/mach-pcm037.c
+++ b/arch/arm/mach-imx/mach-pcm037.c
@@ -703,7 +703,6 @@ MACHINE_START(PCM037, "Phytec Phycore pcm037")
.map_io = mx31_map_io,
.init_early = imx31_init_early,
.init_irq = mx31_init_irq,
- .handle_irq = imx31_handle_irq,
.init_time = pcm037_timer_init,
.init_machine = pcm037_init,
.init_late = pcm037_init_late,
diff --git a/arch/arm/mach-imx/mach-pcm038.c b/arch/arm/mach-imx/mach-pcm038.c
index 592ddbe031ac..6c56fb5553c7 100644
--- a/arch/arm/mach-imx/mach-pcm038.c
+++ b/arch/arm/mach-imx/mach-pcm038.c
@@ -351,7 +351,6 @@ MACHINE_START(PCM038, "phyCORE-i.MX27")
.map_io = mx27_map_io,
.init_early = imx27_init_early,
.init_irq = mx27_init_irq,
- .handle_irq = imx27_handle_irq,
.init_time = pcm038_timer_init,
.init_machine = pcm038_init,
.restart = mxc_restart,
diff --git a/arch/arm/mach-imx/mach-pcm043.c b/arch/arm/mach-imx/mach-pcm043.c
index ac504b67326b..c62b5d261345 100644
--- a/arch/arm/mach-imx/mach-pcm043.c
+++ b/arch/arm/mach-imx/mach-pcm043.c
@@ -400,7 +400,6 @@ MACHINE_START(PCM043, "Phytec Phycore pcm043")
.map_io = mx35_map_io,
.init_early = imx35_init_early,
.init_irq = mx35_init_irq,
- .handle_irq = imx35_handle_irq,
.init_time = pcm043_timer_init,
.init_machine = pcm043_init,
.restart = mxc_restart,
diff --git a/arch/arm/mach-imx/mach-qong.c b/arch/arm/mach-imx/mach-qong.c
index 22af27ed457e..a213e7b9cb1c 100644
--- a/arch/arm/mach-imx/mach-qong.c
+++ b/arch/arm/mach-imx/mach-qong.c
@@ -266,7 +266,6 @@ MACHINE_START(QONG, "Dave/DENX QongEVB-LITE")
.map_io = mx31_map_io,
.init_early = imx31_init_early,
.init_irq = mx31_init_irq,
- .handle_irq = imx31_handle_irq,
.init_time = qong_timer_init,
.init_machine = qong_init,
.restart = mxc_restart,
diff --git a/arch/arm/mach-imx/mach-scb9328.c b/arch/arm/mach-imx/mach-scb9328.c
index b0fa10dd79fe..1f6bc3f7ae14 100644
--- a/arch/arm/mach-imx/mach-scb9328.c
+++ b/arch/arm/mach-imx/mach-scb9328.c
@@ -137,7 +137,6 @@ MACHINE_START(SCB9328, "Synertronixx scb9328")
.map_io = mx1_map_io,
.init_early = imx1_init_early,
.init_irq = mx1_init_irq,
- .handle_irq = imx1_handle_irq,
.init_time = scb9328_timer_init,
.init_machine = scb9328_init,
.restart = mxc_restart,
diff --git a/arch/arm/mach-imx/mach-vpr200.c b/arch/arm/mach-imx/mach-vpr200.c
index 8825d1217d18..872b3c6ba408 100644
--- a/arch/arm/mach-imx/mach-vpr200.c
+++ b/arch/arm/mach-imx/mach-vpr200.c
@@ -310,7 +310,6 @@ MACHINE_START(VPR200, "VPR200")
.map_io = mx35_map_io,
.init_early = imx35_init_early,
.init_irq = mx35_init_irq,
- .handle_irq = imx35_handle_irq,
.init_time = vpr200_timer_init,
.init_machine = vpr200_board_init,
.restart = mxc_restart,
diff --git a/arch/arm/mach-imx/mxc.h b/arch/arm/mach-imx/mxc.h
index b08ab3ad4a6d..75d6a37e1ae4 100644
--- a/arch/arm/mach-imx/mxc.h
+++ b/arch/arm/mach-imx/mxc.h
@@ -36,6 +36,7 @@
#define MXC_CPU_MX53 53
#define MXC_CPU_IMX6SL 0x60
#define MXC_CPU_IMX6DL 0x61
+#define MXC_CPU_IMX6SX 0x62
#define MXC_CPU_IMX6Q 0x63
#define IMX_CHIP_REVISION_1_0 0x10
@@ -163,6 +164,11 @@ static inline bool cpu_is_imx6dl(void)
return __mxc_cpu_type == MXC_CPU_IMX6DL;
}
+static inline bool cpu_is_imx6sx(void)
+{
+ return __mxc_cpu_type == MXC_CPU_IMX6SX;
+}
+
static inline bool cpu_is_imx6q(void)
{
return __mxc_cpu_type == MXC_CPU_IMX6Q;
diff --git a/arch/arm/mach-imx/time.c b/arch/arm/mach-imx/time.c
index 65222ea0df6d..bed081e58262 100644
--- a/arch/arm/mach-imx/time.c
+++ b/arch/arm/mach-imx/time.c
@@ -28,6 +28,9 @@
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/sched_clock.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
#include <asm/mach/time.h>
@@ -328,3 +331,15 @@ void __init mxc_timer_init(void __iomem *base, int irq)
/* Make irqs happen */
setup_irq(irq, &mxc_timer_irq);
}
+
+void __init mxc_timer_init_dt(struct device_node *np)
+{
+ void __iomem *base;
+ int irq;
+
+ base = of_iomap(np, 0);
+ WARN_ON(!base);
+ irq = irq_of_parse_and_map(np, 0);
+
+ mxc_timer_init(base, irq);
+}
diff --git a/arch/arm/mach-imx/tzic.c b/arch/arm/mach-imx/tzic.c
index 8183178d5aa3..7828af4b2022 100644
--- a/arch/arm/mach-imx/tzic.c
+++ b/arch/arm/mach-imx/tzic.c
@@ -125,7 +125,7 @@ static __init void tzic_init_gc(int idx, unsigned int irq_start)
irq_setup_generic_chip(gc, IRQ_MSK(32), 0, IRQ_NOREQUEST, 0);
}
-asmlinkage void __exception_irq_entry tzic_handle_irq(struct pt_regs *regs)
+static void __exception_irq_entry tzic_handle_irq(struct pt_regs *regs)
{
u32 stat;
int i, irqofs, handled;
@@ -189,6 +189,8 @@ void __init tzic_init_irq(void __iomem *irqbase)
for (i = 0; i < 4; i++, irq_base += 32)
tzic_init_gc(i, irq_base);
+ set_handle_irq(tzic_handle_irq);
+
#ifdef CONFIG_FIQ
/* Initialize FIQ */
init_FIQ(FIQ_START);
diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c
index 2801da49e2a3..ff18ff20f71f 100644
--- a/arch/arm/mach-kirkwood/board-dt.c
+++ b/arch/arm/mach-kirkwood/board-dt.c
@@ -195,7 +195,7 @@ static void __init kirkwood_dt_init(void)
{
kirkwood_disable_mbus_error_propagation();
- BUG_ON(mvebu_mbus_dt_init());
+ BUG_ON(mvebu_mbus_dt_init(false));
#ifdef CONFIG_CACHE_FEROCEON_L2
feroceon_of_init();
diff --git a/arch/arm/mach-kirkwood/irq.c b/arch/arm/mach-kirkwood/irq.c
index 2a97a2e4163c..2c47a8ad0e27 100644
--- a/arch/arm/mach-kirkwood/irq.c
+++ b/arch/arm/mach-kirkwood/irq.c
@@ -7,6 +7,7 @@
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
+#include <asm/exception.h>
#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/irq.h>
@@ -30,11 +31,47 @@ static int __initdata gpio1_irqs[4] = {
0,
};
+#ifdef CONFIG_MULTI_IRQ_HANDLER
+/*
+ * Compiling with both non-DT and DT support enabled, will
+ * break asm irq handler used by non-DT boards. Therefore,
+ * we provide a C-style irq handler even for non-DT boards,
+ * if MULTI_IRQ_HANDLER is set.
+ */
+
+static void __iomem *kirkwood_irq_base = IRQ_VIRT_BASE;
+
+asmlinkage void
+__exception_irq_entry kirkwood_legacy_handle_irq(struct pt_regs *regs)
+{
+ u32 stat;
+
+ stat = readl_relaxed(kirkwood_irq_base + IRQ_CAUSE_LOW_OFF);
+ stat &= readl_relaxed(kirkwood_irq_base + IRQ_MASK_LOW_OFF);
+ if (stat) {
+ unsigned int hwirq = __fls(stat);
+ handle_IRQ(hwirq, regs);
+ return;
+ }
+ stat = readl_relaxed(kirkwood_irq_base + IRQ_CAUSE_HIGH_OFF);
+ stat &= readl_relaxed(kirkwood_irq_base + IRQ_MASK_HIGH_OFF);
+ if (stat) {
+ unsigned int hwirq = 32 + __fls(stat);
+ handle_IRQ(hwirq, regs);
+ return;
+ }
+}
+#endif
+
void __init kirkwood_init_irq(void)
{
orion_irq_init(0, IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF);
orion_irq_init(32, IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF);
+#ifdef CONFIG_MULTI_IRQ_HANDLER
+ set_handle_irq(kirkwood_legacy_handle_irq);
+#endif
+
/*
* Initialize gpiolib for GPIOs 0-49.
*/
diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig
index a7f959e58c3d..9b26976fb084 100644
--- a/arch/arm/mach-msm/Kconfig
+++ b/arch/arm/mach-msm/Kconfig
@@ -42,9 +42,6 @@ config ARCH_QSD8X50
endchoice
-config MSM_HAS_DEBUG_UART_HS
- bool
-
config MSM_SOC_REV_A
bool
diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig
index 2052a90d9981..6090b9eb00c8 100644
--- a/arch/arm/mach-mvebu/Kconfig
+++ b/arch/arm/mach-mvebu/Kconfig
@@ -5,6 +5,7 @@ config ARCH_MVEBU
select GENERIC_IRQ_CHIP
select PINCTRL
select PLAT_ORION
+ select SOC_BUS
select MVEBU_MBUS
select ZONE_DMA if ARM_LPAE
select ARCH_REQUIRE_GPIOLIB
@@ -35,6 +36,9 @@ config MACH_ARMADA_375
select ARM_ERRATA_753970
select ARM_GIC
select ARMADA_375_CLK
+ select HAVE_ARM_SCU
+ select HAVE_ARM_TWD if SMP
+ select HAVE_SMP
select MACH_MVEBU_V7
select PINCTRL_ARMADA_375
help
@@ -47,6 +51,9 @@ config MACH_ARMADA_38X
select ARM_ERRATA_753970
select ARM_GIC
select ARMADA_38X_CLK
+ select HAVE_ARM_SCU
+ select HAVE_ARM_TWD if SMP
+ select HAVE_SMP
select MACH_MVEBU_V7
select PINCTRL_ARMADA_38X
help
@@ -90,13 +97,6 @@ config MACH_KIRKWOOD
Say 'Y' here if you want your kernel to support boards based
on the Marvell Kirkwood device tree.
-config MACH_T5325
- bool "HP T5325 thin client"
- depends on MACH_KIRKWOOD
- help
- Say 'Y' here if you want your kernel to support the
- HP T5325 Thin client
-
endmenu
endif
diff --git a/arch/arm/mach-mvebu/Makefile b/arch/arm/mach-mvebu/Makefile
index a63e43b6b451..2ecb828e4a8b 100644
--- a/arch/arm/mach-mvebu/Makefile
+++ b/arch/arm/mach-mvebu/Makefile
@@ -2,12 +2,15 @@ ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include \
-I$(srctree)/arch/arm/plat-orion/include
AFLAGS_coherency_ll.o := -Wa,-march=armv7-a
+CFLAGS_pmsu.o := -march=armv7-a
obj-y += system-controller.o mvebu-soc-id.o
-obj-$(CONFIG_MACH_MVEBU_V7) += board-v7.o
+
+ifeq ($(CONFIG_MACH_MVEBU_V7),y)
+obj-y += cpu-reset.o board-v7.o coherency.o coherency_ll.o pmsu.o
+obj-$(CONFIG_SMP) += platsmp.o headsmp.o platsmp-a9.o headsmp-a9.o
+obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
+endif
+
obj-$(CONFIG_MACH_DOVE) += dove.o
-obj-$(CONFIG_ARCH_MVEBU) += coherency.o coherency_ll.o pmsu.o
-obj-$(CONFIG_SMP) += platsmp.o headsmp.o
-obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
obj-$(CONFIG_MACH_KIRKWOOD) += kirkwood.o kirkwood-pm.o
-obj-$(CONFIG_MACH_T5325) += board-t5325.o
diff --git a/arch/arm/mach-mvebu/armada-370-xp.h b/arch/arm/mach-mvebu/armada-370-xp.h
index 237c86b83390..c3465f5b1250 100644
--- a/arch/arm/mach-mvebu/armada-370-xp.h
+++ b/arch/arm/mach-mvebu/armada-370-xp.h
@@ -20,8 +20,6 @@
#define ARMADA_XP_MAX_CPUS 4
-void armada_mpic_send_doorbell(const struct cpumask *mask, unsigned int irq);
-void armada_xp_mpic_smp_cpu_init(void);
void armada_xp_secondary_startup(void);
extern struct smp_operations armada_xp_smp_ops;
#endif
diff --git a/arch/arm/mach-mvebu/board-t5325.c b/arch/arm/mach-mvebu/board-t5325.c
deleted file mode 100644
index 65ace6db9f28..000000000000
--- a/arch/arm/mach-mvebu/board-t5325.c
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * HP T5325 Board Setup
- *
- * Copyright (C) 2014
- *
- * Andrew Lunn <andrew@lunn.ch>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/i2c.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <sound/alc5623.h>
-#include "board.h"
-
-static struct platform_device hp_t5325_audio_device = {
- .name = "t5325-audio",
- .id = -1,
-};
-
-static struct alc5623_platform_data alc5621_data = {
- .add_ctrl = 0x3700,
- .jack_det_ctrl = 0x4810,
-};
-
-static struct i2c_board_info i2c_board_info[] __initdata = {
- {
- I2C_BOARD_INFO("alc5621", 0x1a),
- .platform_data = &alc5621_data,
- },
-};
-
-void __init t5325_init(void)
-{
- i2c_register_board_info(0, i2c_board_info, ARRAY_SIZE(i2c_board_info));
- platform_device_register(&hp_t5325_audio_device);
-}
diff --git a/arch/arm/mach-mvebu/board-v7.c b/arch/arm/mach-mvebu/board-v7.c
index 333fca8fdc41..01cfce6ac20b 100644
--- a/arch/arm/mach-mvebu/board-v7.c
+++ b/arch/arm/mach-mvebu/board-v7.c
@@ -27,12 +27,30 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
+#include <asm/smp_scu.h>
#include "armada-370-xp.h"
#include "common.h"
#include "coherency.h"
#include "mvebu-soc-id.h"
/*
+ * Enables the SCU when available. Obviously, this is only useful on
+ * Cortex-A based SOCs, not on PJ4B based ones.
+ */
+static void __init mvebu_scu_enable(void)
+{
+ void __iomem *scu_base;
+
+ struct device_node *np =
+ of_find_compatible_node(NULL, NULL, "arm,cortex-a9-scu");
+ if (np) {
+ scu_base = of_iomap(np, 0);
+ scu_enable(scu_base);
+ of_node_put(np);
+ }
+}
+
+/*
* Early versions of Armada 375 SoC have a bug where the BootROM
* leaves an external data abort pending. The kernel is hit by this
* data abort as soon as it enters userspace, because it unmasks the
@@ -57,11 +75,10 @@ static void __init mvebu_timer_and_clk_init(void)
{
of_clk_init(NULL);
clocksource_of_init();
+ mvebu_scu_enable();
coherency_init();
- BUG_ON(mvebu_mbus_dt_init());
-#ifdef CONFIG_CACHE_L2X0
+ BUG_ON(mvebu_mbus_dt_init(coherency_available()));
l2x0_of_init(0, ~0UL);
-#endif
if (of_machine_is_compatible("marvell,armada375"))
hook_fault_code(16 + 6, armada_375_external_abort_wa, SIGBUS, 0,
@@ -78,7 +95,7 @@ static void __init i2c_quirk(void)
* mechanism. We can exit only if we are sure that we can
* get the SoC revision and it is more recent than A0.
*/
- if (mvebu_get_soc_id(&rev, &dev) == 0 && dev > MV78XX0_A0_REV)
+ if (mvebu_get_soc_id(&dev, &rev) == 0 && rev > MV78XX0_A0_REV)
return;
for_each_compatible_node(np, NULL, "marvell,mv78230-i2c") {
@@ -96,10 +113,66 @@ static void __init i2c_quirk(void)
return;
}
+#define A375_Z1_THERMAL_FIXUP_OFFSET 0xc
+
+static void __init thermal_quirk(void)
+{
+ struct device_node *np;
+ u32 dev, rev;
+
+ if (mvebu_get_soc_id(&dev, &rev) == 0 && rev > ARMADA_375_Z1_REV)
+ return;
+
+ for_each_compatible_node(np, NULL, "marvell,armada375-thermal") {
+ struct property *prop;
+ __be32 newval, *newprop, *oldprop;
+ int len;
+
+ /*
+ * The register offset is at a wrong location. This quirk
+ * creates a new reg property as a clone of the previous
+ * one and corrects the offset.
+ */
+ oldprop = (__be32 *)of_get_property(np, "reg", &len);
+ if (!oldprop)
+ continue;
+
+ /* Create a duplicate of the 'reg' property */
+ prop = kzalloc(sizeof(*prop), GFP_KERNEL);
+ prop->length = len;
+ prop->name = kstrdup("reg", GFP_KERNEL);
+ prop->value = kzalloc(len, GFP_KERNEL);
+ memcpy(prop->value, oldprop, len);
+
+ /* Fixup the register offset of the second entry */
+ oldprop += 2;
+ newprop = (__be32 *)prop->value + 2;
+ newval = cpu_to_be32(be32_to_cpu(*oldprop) -
+ A375_Z1_THERMAL_FIXUP_OFFSET);
+ *newprop = newval;
+ of_update_property(np, prop);
+
+ /*
+ * The thermal controller needs some quirk too, so let's change
+ * the compatible string to reflect this.
+ */
+ prop = kzalloc(sizeof(*prop), GFP_KERNEL);
+ prop->name = kstrdup("compatible", GFP_KERNEL);
+ prop->length = sizeof("marvell,armada375-z1-thermal");
+ prop->value = kstrdup("marvell,armada375-z1-thermal",
+ GFP_KERNEL);
+ of_update_property(np, prop);
+ }
+ return;
+}
+
static void __init mvebu_dt_init(void)
{
if (of_machine_is_compatible("plathome,openblocks-ax3-4"))
i2c_quirk();
+ if (of_machine_is_compatible("marvell,a375-db"))
+ thermal_quirk();
+
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
@@ -123,6 +196,7 @@ static const char * const armada_375_dt_compat[] = {
DT_MACHINE_START(ARMADA_375_DT, "Marvell Armada 375 (Device Tree)")
.init_time = mvebu_timer_and_clk_init,
+ .init_machine = mvebu_dt_init,
.restart = mvebu_restart,
.dt_compat = armada_375_dt_compat,
MACHINE_END
diff --git a/arch/arm/mach-mvebu/board.h b/arch/arm/mach-mvebu/board.h
index de7f0a191394..9c7bb4386f8b 100644
--- a/arch/arm/mach-mvebu/board.h
+++ b/arch/arm/mach-mvebu/board.h
@@ -13,10 +13,4 @@
#ifndef __ARCH_MVEBU_BOARD_H
#define __ARCH_MVEBU_BOARD_H
-#ifdef CONFIG_MACH_T5325
-void t5325_init(void);
-#else
-static inline void t5325_init(void) {};
-#endif
-
#endif
diff --git a/arch/arm/mach-mvebu/coherency.c b/arch/arm/mach-mvebu/coherency.c
index 4e9d58148ca7..477202fd39cc 100644
--- a/arch/arm/mach-mvebu/coherency.c
+++ b/arch/arm/mach-mvebu/coherency.c
@@ -17,6 +17,8 @@
* supplies basic routines for configuring and controlling hardware coherency
*/
+#define pr_fmt(fmt) "mvebu-coherency: " fmt
+
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/of_address.h>
@@ -24,13 +26,19 @@
#include <linux/smp.h>
#include <linux/dma-mapping.h>
#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/mbus.h>
+#include <linux/clk.h>
+#include <linux/pci.h>
#include <asm/smp_plat.h>
#include <asm/cacheflush.h>
+#include <asm/mach/map.h>
#include "armada-370-xp.h"
#include "coherency.h"
+#include "mvebu-soc-id.h"
unsigned long coherency_phys_base;
-static void __iomem *coherency_base;
+void __iomem *coherency_base;
static void __iomem *coherency_cpu_base;
/* Coherency fabric registers */
@@ -38,27 +46,190 @@ static void __iomem *coherency_cpu_base;
#define IO_SYNC_BARRIER_CTL_OFFSET 0x0
+enum {
+ COHERENCY_FABRIC_TYPE_NONE,
+ COHERENCY_FABRIC_TYPE_ARMADA_370_XP,
+ COHERENCY_FABRIC_TYPE_ARMADA_375,
+ COHERENCY_FABRIC_TYPE_ARMADA_380,
+};
+
static struct of_device_id of_coherency_table[] = {
- {.compatible = "marvell,coherency-fabric"},
+ {.compatible = "marvell,coherency-fabric",
+ .data = (void *) COHERENCY_FABRIC_TYPE_ARMADA_370_XP },
+ {.compatible = "marvell,armada-375-coherency-fabric",
+ .data = (void *) COHERENCY_FABRIC_TYPE_ARMADA_375 },
+ {.compatible = "marvell,armada-380-coherency-fabric",
+ .data = (void *) COHERENCY_FABRIC_TYPE_ARMADA_380 },
{ /* end of list */ },
};
-/* Function defined in coherency_ll.S */
-int ll_set_cpu_coherent(void __iomem *base_addr, unsigned int hw_cpu_id);
+/* Functions defined in coherency_ll.S */
+int ll_enable_coherency(void);
+void ll_add_cpu_to_smp_group(void);
-int set_cpu_coherent(unsigned int hw_cpu_id, int smp_group_id)
+int set_cpu_coherent(void)
{
if (!coherency_base) {
- pr_warn("Can't make CPU %d cache coherent.\n", hw_cpu_id);
+ pr_warn("Can't make current CPU cache coherent.\n");
pr_warn("Coherency fabric is not initialized\n");
return 1;
}
- return ll_set_cpu_coherent(coherency_base, hw_cpu_id);
+ ll_add_cpu_to_smp_group();
+ return ll_enable_coherency();
+}
+
+/*
+ * The below code implements the I/O coherency workaround on Armada
+ * 375. This workaround consists in using the two channels of the
+ * first XOR engine to trigger a XOR transaction that serves as the
+ * I/O coherency barrier.
+ */
+
+static void __iomem *xor_base, *xor_high_base;
+static dma_addr_t coherency_wa_buf_phys[CONFIG_NR_CPUS];
+static void *coherency_wa_buf[CONFIG_NR_CPUS];
+static bool coherency_wa_enabled;
+
+#define XOR_CONFIG(chan) (0x10 + (chan * 4))
+#define XOR_ACTIVATION(chan) (0x20 + (chan * 4))
+#define WINDOW_BAR_ENABLE(chan) (0x240 + ((chan) << 2))
+#define WINDOW_BASE(w) (0x250 + ((w) << 2))
+#define WINDOW_SIZE(w) (0x270 + ((w) << 2))
+#define WINDOW_REMAP_HIGH(w) (0x290 + ((w) << 2))
+#define WINDOW_OVERRIDE_CTRL(chan) (0x2A0 + ((chan) << 2))
+#define XOR_DEST_POINTER(chan) (0x2B0 + (chan * 4))
+#define XOR_BLOCK_SIZE(chan) (0x2C0 + (chan * 4))
+#define XOR_INIT_VALUE_LOW 0x2E0
+#define XOR_INIT_VALUE_HIGH 0x2E4
+
+static inline void mvebu_hwcc_armada375_sync_io_barrier_wa(void)
+{
+ int idx = smp_processor_id();
+
+ /* Write '1' to the first word of the buffer */
+ writel(0x1, coherency_wa_buf[idx]);
+
+ /* Wait until the engine is idle */
+ while ((readl(xor_base + XOR_ACTIVATION(idx)) >> 4) & 0x3)
+ ;
+
+ dmb();
+
+ /* Trigger channel */
+ writel(0x1, xor_base + XOR_ACTIVATION(idx));
+
+ /* Poll the data until it is cleared by the XOR transaction */
+ while (readl(coherency_wa_buf[idx]))
+ ;
+}
+
+static void __init armada_375_coherency_init_wa(void)
+{
+ const struct mbus_dram_target_info *dram;
+ struct device_node *xor_node;
+ struct property *xor_status;
+ struct clk *xor_clk;
+ u32 win_enable = 0;
+ int i;
+
+ pr_warn("enabling coherency workaround for Armada 375 Z1, one XOR engine disabled\n");
+
+ /*
+ * Since the workaround uses one XOR engine, we grab a
+ * reference to its Device Tree node first.
+ */
+ xor_node = of_find_compatible_node(NULL, NULL, "marvell,orion-xor");
+ BUG_ON(!xor_node);
+
+ /*
+ * Then we mark it as disabled so that the real XOR driver
+ * will not use it.
+ */
+ xor_status = kzalloc(sizeof(struct property), GFP_KERNEL);
+ BUG_ON(!xor_status);
+
+ xor_status->value = kstrdup("disabled", GFP_KERNEL);
+ BUG_ON(!xor_status->value);
+
+ xor_status->length = 8;
+ xor_status->name = kstrdup("status", GFP_KERNEL);
+ BUG_ON(!xor_status->name);
+
+ of_update_property(xor_node, xor_status);
+
+ /*
+ * And we remap the registers, get the clock, and do the
+ * initial configuration of the XOR engine.
+ */
+ xor_base = of_iomap(xor_node, 0);
+ xor_high_base = of_iomap(xor_node, 1);
+
+ xor_clk = of_clk_get_by_name(xor_node, NULL);
+ BUG_ON(!xor_clk);
+
+ clk_prepare_enable(xor_clk);
+
+ dram = mv_mbus_dram_info();
+
+ for (i = 0; i < 8; i++) {
+ writel(0, xor_base + WINDOW_BASE(i));
+ writel(0, xor_base + WINDOW_SIZE(i));
+ if (i < 4)
+ writel(0, xor_base + WINDOW_REMAP_HIGH(i));
+ }
+
+ for (i = 0; i < dram->num_cs; i++) {
+ const struct mbus_dram_window *cs = dram->cs + i;
+ writel((cs->base & 0xffff0000) |
+ (cs->mbus_attr << 8) |
+ dram->mbus_dram_target_id, xor_base + WINDOW_BASE(i));
+ writel((cs->size - 1) & 0xffff0000, xor_base + WINDOW_SIZE(i));
+
+ win_enable |= (1 << i);
+ win_enable |= 3 << (16 + (2 * i));
+ }
+
+ writel(win_enable, xor_base + WINDOW_BAR_ENABLE(0));
+ writel(win_enable, xor_base + WINDOW_BAR_ENABLE(1));
+ writel(0, xor_base + WINDOW_OVERRIDE_CTRL(0));
+ writel(0, xor_base + WINDOW_OVERRIDE_CTRL(1));
+
+ for (i = 0; i < CONFIG_NR_CPUS; i++) {
+ coherency_wa_buf[i] = kzalloc(PAGE_SIZE, GFP_KERNEL);
+ BUG_ON(!coherency_wa_buf[i]);
+
+ /*
+ * We can't use the DMA mapping API, since we don't
+ * have a valid 'struct device' pointer
+ */
+ coherency_wa_buf_phys[i] =
+ virt_to_phys(coherency_wa_buf[i]);
+ BUG_ON(!coherency_wa_buf_phys[i]);
+
+ /*
+ * Configure the XOR engine for memset operation, with
+ * a 128 bytes block size
+ */
+ writel(0x444, xor_base + XOR_CONFIG(i));
+ writel(128, xor_base + XOR_BLOCK_SIZE(i));
+ writel(coherency_wa_buf_phys[i],
+ xor_base + XOR_DEST_POINTER(i));
+ }
+
+ writel(0x0, xor_base + XOR_INIT_VALUE_LOW);
+ writel(0x0, xor_base + XOR_INIT_VALUE_HIGH);
+
+ coherency_wa_enabled = true;
}
static inline void mvebu_hwcc_sync_io_barrier(void)
{
+ if (coherency_wa_enabled) {
+ mvebu_hwcc_armada375_sync_io_barrier_wa();
+ return;
+ }
+
writel(0x1, coherency_cpu_base + IO_SYNC_BARRIER_CTL_OFFSET);
while (readl(coherency_cpu_base + IO_SYNC_BARRIER_CTL_OFFSET) & 0x1);
}
@@ -105,8 +276,8 @@ static struct dma_map_ops mvebu_hwcc_dma_ops = {
.set_dma_mask = arm_dma_set_mask,
};
-static int mvebu_hwcc_platform_notifier(struct notifier_block *nb,
- unsigned long event, void *__dev)
+static int mvebu_hwcc_notifier(struct notifier_block *nb,
+ unsigned long event, void *__dev)
{
struct device *dev = __dev;
@@ -117,47 +288,148 @@ static int mvebu_hwcc_platform_notifier(struct notifier_block *nb,
return NOTIFY_OK;
}
-static struct notifier_block mvebu_hwcc_platform_nb = {
- .notifier_call = mvebu_hwcc_platform_notifier,
+static struct notifier_block mvebu_hwcc_nb = {
+ .notifier_call = mvebu_hwcc_notifier,
};
-int __init coherency_init(void)
+static void __init armada_370_coherency_init(struct device_node *np)
+{
+ struct resource res;
+
+ of_address_to_resource(np, 0, &res);
+ coherency_phys_base = res.start;
+ /*
+ * Ensure secondary CPUs will see the updated value,
+ * which they read before they join the coherency
+ * fabric, and therefore before they are coherent with
+ * the boot CPU cache.
+ */
+ sync_cache_w(&coherency_phys_base);
+ coherency_base = of_iomap(np, 0);
+ coherency_cpu_base = of_iomap(np, 1);
+ set_cpu_coherent();
+}
+
+/*
+ * This ioremap hook is used on Armada 375/38x to ensure that PCIe
+ * memory areas are mapped as MT_UNCACHED instead of MT_DEVICE. This
+ * is needed as a workaround for a deadlock issue between the PCIe
+ * interface and the cache controller.
+ */
+static void __iomem *
+armada_pcie_wa_ioremap_caller(phys_addr_t phys_addr, size_t size,
+ unsigned int mtype, void *caller)
+{
+ struct resource pcie_mem;
+
+ mvebu_mbus_get_pcie_mem_aperture(&pcie_mem);
+
+ if (pcie_mem.start <= phys_addr && (phys_addr + size) <= pcie_mem.end)
+ mtype = MT_UNCACHED;
+
+ return __arm_ioremap_caller(phys_addr, size, mtype, caller);
+}
+
+static void __init armada_375_380_coherency_init(struct device_node *np)
+{
+ struct device_node *cache_dn;
+
+ coherency_cpu_base = of_iomap(np, 0);
+ arch_ioremap_caller = armada_pcie_wa_ioremap_caller;
+
+ /*
+ * Add the PL310 property "arm,io-coherent". This makes sure the
+ * outer sync operation is not used, which allows to
+ * workaround the system erratum that causes deadlocks when
+ * doing PCIe in an SMP situation on Armada 375 and Armada
+ * 38x.
+ */
+ for_each_compatible_node(cache_dn, NULL, "arm,pl310-cache") {
+ struct property *p;
+
+ p = kzalloc(sizeof(*p), GFP_KERNEL);
+ p->name = kstrdup("arm,io-coherent", GFP_KERNEL);
+ of_add_property(cache_dn, p);
+ }
+}
+
+static int coherency_type(void)
{
struct device_node *np;
+ const struct of_device_id *match;
- np = of_find_matching_node(NULL, of_coherency_table);
+ np = of_find_matching_node_and_match(NULL, of_coherency_table, &match);
if (np) {
- struct resource res;
- pr_info("Initializing Coherency fabric\n");
- of_address_to_resource(np, 0, &res);
- coherency_phys_base = res.start;
- /*
- * Ensure secondary CPUs will see the updated value,
- * which they read before they join the coherency
- * fabric, and therefore before they are coherent with
- * the boot CPU cache.
- */
- sync_cache_w(&coherency_phys_base);
- coherency_base = of_iomap(np, 0);
- coherency_cpu_base = of_iomap(np, 1);
- set_cpu_coherent(cpu_logical_map(smp_processor_id()), 0);
- of_node_put(np);
+ int type = (int) match->data;
+
+ /* Armada 370/XP coherency works in both UP and SMP */
+ if (type == COHERENCY_FABRIC_TYPE_ARMADA_370_XP)
+ return type;
+
+ /* Armada 375 coherency works only on SMP */
+ else if (type == COHERENCY_FABRIC_TYPE_ARMADA_375 && is_smp())
+ return type;
+
+ /* Armada 380 coherency works only on SMP */
+ else if (type == COHERENCY_FABRIC_TYPE_ARMADA_380 && is_smp())
+ return type;
}
- return 0;
+ return COHERENCY_FABRIC_TYPE_NONE;
}
-static int __init coherency_late_init(void)
+int coherency_available(void)
+{
+ return coherency_type() != COHERENCY_FABRIC_TYPE_NONE;
+}
+
+int __init coherency_init(void)
{
+ int type = coherency_type();
struct device_node *np;
np = of_find_matching_node(NULL, of_coherency_table);
- if (np) {
- bus_register_notifier(&platform_bus_type,
- &mvebu_hwcc_platform_nb);
- of_node_put(np);
+
+ if (type == COHERENCY_FABRIC_TYPE_ARMADA_370_XP)
+ armada_370_coherency_init(np);
+ else if (type == COHERENCY_FABRIC_TYPE_ARMADA_375 ||
+ type == COHERENCY_FABRIC_TYPE_ARMADA_380)
+ armada_375_380_coherency_init(np);
+
+ return 0;
+}
+
+static int __init coherency_late_init(void)
+{
+ int type = coherency_type();
+
+ if (type == COHERENCY_FABRIC_TYPE_NONE)
+ return 0;
+
+ if (type == COHERENCY_FABRIC_TYPE_ARMADA_375) {
+ u32 dev, rev;
+
+ if (mvebu_get_soc_id(&dev, &rev) == 0 &&
+ rev == ARMADA_375_Z1_REV)
+ armada_375_coherency_init_wa();
}
+
+ bus_register_notifier(&platform_bus_type,
+ &mvebu_hwcc_nb);
+
return 0;
}
postcore_initcall(coherency_late_init);
+
+#if IS_ENABLED(CONFIG_PCI)
+static int __init coherency_pci_init(void)
+{
+ if (coherency_available())
+ bus_register_notifier(&pci_bus_type,
+ &mvebu_hwcc_nb);
+ return 0;
+}
+
+arch_initcall(coherency_pci_init);
+#endif
diff --git a/arch/arm/mach-mvebu/coherency.h b/arch/arm/mach-mvebu/coherency.h
index 760226c41353..54cb7607b526 100644
--- a/arch/arm/mach-mvebu/coherency.h
+++ b/arch/arm/mach-mvebu/coherency.h
@@ -15,8 +15,9 @@
#define __MACH_370_XP_COHERENCY_H
extern unsigned long coherency_phys_base;
+int set_cpu_coherent(void);
-int set_cpu_coherent(unsigned int cpu_id, int smp_group_id);
int coherency_init(void);
+int coherency_available(void);
#endif /* __MACH_370_XP_COHERENCY_H */
diff --git a/arch/arm/mach-mvebu/coherency_ll.S b/arch/arm/mach-mvebu/coherency_ll.S
index ee7598fe75db..510c29e079ca 100644
--- a/arch/arm/mach-mvebu/coherency_ll.S
+++ b/arch/arm/mach-mvebu/coherency_ll.S
@@ -21,38 +21,129 @@
#define ARMADA_XP_CFB_CFG_REG_OFFSET 0x4
#include <asm/assembler.h>
+#include <asm/cp15.h>
.text
+/* Returns the coherency base address in r1 (r0 is untouched) */
+ENTRY(ll_get_coherency_base)
+ mrc p15, 0, r1, c1, c0, 0
+ tst r1, #CR_M @ Check MMU bit enabled
+ bne 1f
+
+ /*
+ * MMU is disabled, use the physical address of the coherency
+ * base address.
+ */
+ adr r1, 3f
+ ldr r3, [r1]
+ ldr r1, [r1, r3]
+ b 2f
+1:
+ /*
+ * MMU is enabled, use the virtual address of the coherency
+ * base address.
+ */
+ ldr r1, =coherency_base
+ ldr r1, [r1]
+2:
+ mov pc, lr
+ENDPROC(ll_get_coherency_base)
+
/*
- * r0: Coherency fabric base register address
- * r1: HW CPU id
+ * Returns the coherency CPU mask in r3 (r0 is untouched). This
+ * coherency CPU mask can be used with the coherency fabric
+ * configuration and control registers. Note that the mask is already
+ * endian-swapped as appropriate so that the calling functions do not
+ * have to care about endianness issues while accessing the coherency
+ * fabric registers
*/
-ENTRY(ll_set_cpu_coherent)
- /* Create bit by cpu index */
- mov r3, #(1 << 24)
- lsl r1, r3, r1
-ARM_BE8(rev r1, r1)
-
- /* Add CPU to SMP group - Atomic */
- add r3, r0, #ARMADA_XP_CFB_CTL_REG_OFFSET
-1:
- ldrex r2, [r3]
- orr r2, r2, r1
- strex r0, r2, [r3]
- cmp r0, #0
- bne 1b
-
- /* Enable coherency on CPU - Atomic */
- add r3, r3, #ARMADA_XP_CFB_CFG_REG_OFFSET
+ENTRY(ll_get_coherency_cpumask)
+ mrc 15, 0, r3, cr0, cr0, 5
+ and r3, r3, #15
+ mov r2, #(1 << 24)
+ lsl r3, r2, r3
+ARM_BE8(rev r3, r3)
+ mov pc, lr
+ENDPROC(ll_get_coherency_cpumask)
+
+/*
+ * ll_add_cpu_to_smp_group(), ll_enable_coherency() and
+ * ll_disable_coherency() use the strex/ldrex instructions while the
+ * MMU can be disabled. The Armada XP SoC has an exclusive monitor
+ * that tracks transactions to Device and/or SO memory and thanks to
+ * that, exclusive transactions are functional even when the MMU is
+ * disabled.
+ */
+
+ENTRY(ll_add_cpu_to_smp_group)
+ /*
+ * As r0 is not modified by ll_get_coherency_base() and
+ * ll_get_coherency_cpumask(), we use it to temporarly save lr
+ * and avoid it being modified by the branch and link
+ * calls. This function is used very early in the secondary
+ * CPU boot, and no stack is available at this point.
+ */
+ mov r0, lr
+ bl ll_get_coherency_base
+ bl ll_get_coherency_cpumask
+ mov lr, r0
+ add r0, r1, #ARMADA_XP_CFB_CFG_REG_OFFSET
1:
- ldrex r2, [r3]
- orr r2, r2, r1
- strex r0, r2, [r3]
- cmp r0, #0
- bne 1b
+ ldrex r2, [r0]
+ orr r2, r2, r3
+ strex r1, r2, [r0]
+ cmp r1, #0
+ bne 1b
+ mov pc, lr
+ENDPROC(ll_add_cpu_to_smp_group)
+ENTRY(ll_enable_coherency)
+ /*
+ * As r0 is not modified by ll_get_coherency_base() and
+ * ll_get_coherency_cpumask(), we use it to temporarly save lr
+ * and avoid it being modified by the branch and link
+ * calls. This function is used very early in the secondary
+ * CPU boot, and no stack is available at this point.
+ */
+ mov r0, lr
+ bl ll_get_coherency_base
+ bl ll_get_coherency_cpumask
+ mov lr, r0
+ add r0, r1, #ARMADA_XP_CFB_CTL_REG_OFFSET
+1:
+ ldrex r2, [r0]
+ orr r2, r2, r3
+ strex r1, r2, [r0]
+ cmp r1, #0
+ bne 1b
dsb
-
mov r0, #0
mov pc, lr
-ENDPROC(ll_set_cpu_coherent)
+ENDPROC(ll_enable_coherency)
+
+ENTRY(ll_disable_coherency)
+ /*
+ * As r0 is not modified by ll_get_coherency_base() and
+ * ll_get_coherency_cpumask(), we use it to temporarly save lr
+ * and avoid it being modified by the branch and link
+ * calls. This function is used very early in the secondary
+ * CPU boot, and no stack is available at this point.
+ */
+ mov r0, lr
+ bl ll_get_coherency_base
+ bl ll_get_coherency_cpumask
+ mov lr, r0
+ add r0, r1, #ARMADA_XP_CFB_CTL_REG_OFFSET
+1:
+ ldrex r2, [r0]
+ bic r2, r2, r3
+ strex r1, r2, [r0]
+ cmp r1, #0
+ bne 1b
+ dsb
+ mov pc, lr
+ENDPROC(ll_disable_coherency)
+
+ .align 2
+3:
+ .long coherency_phys_base - .
diff --git a/arch/arm/mach-mvebu/common.h b/arch/arm/mach-mvebu/common.h
index 55449c487c9e..b67fb7a10d8b 100644
--- a/arch/arm/mach-mvebu/common.h
+++ b/arch/arm/mach-mvebu/common.h
@@ -18,6 +18,9 @@
#include <linux/reboot.h>
void mvebu_restart(enum reboot_mode mode, const char *cmd);
+int mvebu_cpu_reset_deassert(int cpu);
+void mvebu_pmsu_set_cpu_boot_addr(int hw_cpu, void *boot_addr);
+void mvebu_system_controller_set_cpu_boot_addr(void *boot_addr);
void armada_xp_cpu_die(unsigned int cpu);
diff --git a/arch/arm/mach-mvebu/cpu-reset.c b/arch/arm/mach-mvebu/cpu-reset.c
new file mode 100644
index 000000000000..4a8f9eebebea
--- /dev/null
+++ b/arch/arm/mach-mvebu/cpu-reset.c
@@ -0,0 +1,103 @@
+/*
+ * Copyright (C) 2014 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#define pr_fmt(fmt) "mvebu-cpureset: " fmt
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/of_address.h>
+#include <linux/io.h>
+#include <linux/resource.h>
+#include "armada-370-xp.h"
+
+static void __iomem *cpu_reset_base;
+static size_t cpu_reset_size;
+
+#define CPU_RESET_OFFSET(cpu) (cpu * 0x8)
+#define CPU_RESET_ASSERT BIT(0)
+
+int mvebu_cpu_reset_deassert(int cpu)
+{
+ u32 reg;
+
+ if (!cpu_reset_base)
+ return -ENODEV;
+
+ if (CPU_RESET_OFFSET(cpu) >= cpu_reset_size)
+ return -EINVAL;
+
+ reg = readl(cpu_reset_base + CPU_RESET_OFFSET(cpu));
+ reg &= ~CPU_RESET_ASSERT;
+ writel(reg, cpu_reset_base + CPU_RESET_OFFSET(cpu));
+
+ return 0;
+}
+
+static int mvebu_cpu_reset_map(struct device_node *np, int res_idx)
+{
+ struct resource res;
+
+ if (of_address_to_resource(np, res_idx, &res)) {
+ pr_err("unable to get resource\n");
+ return -ENOENT;
+ }
+
+ if (!request_mem_region(res.start, resource_size(&res),
+ np->full_name)) {
+ pr_err("unable to request region\n");
+ return -EBUSY;
+ }
+
+ cpu_reset_base = ioremap(res.start, resource_size(&res));
+ if (!cpu_reset_base) {
+ pr_err("unable to map registers\n");
+ release_mem_region(res.start, resource_size(&res));
+ return -ENOMEM;
+ }
+
+ cpu_reset_size = resource_size(&res);
+
+ return 0;
+}
+
+int __init mvebu_cpu_reset_init(void)
+{
+ struct device_node *np;
+ int res_idx;
+ int ret;
+
+ np = of_find_compatible_node(NULL, NULL,
+ "marvell,armada-370-cpu-reset");
+ if (np) {
+ res_idx = 0;
+ } else {
+ /*
+ * This code is kept for backward compatibility with
+ * old Device Trees.
+ */
+ np = of_find_compatible_node(NULL, NULL,
+ "marvell,armada-370-xp-pmsu");
+ if (np) {
+ pr_warn(FW_WARN "deprecated pmsu binding\n");
+ res_idx = 1;
+ }
+ }
+
+ /* No reset node found */
+ if (!np)
+ return -ENODEV;
+
+ ret = mvebu_cpu_reset_map(np, res_idx);
+ of_node_put(np);
+
+ return ret;
+}
+
+early_initcall(mvebu_cpu_reset_init);
diff --git a/arch/arm/mach-mvebu/dove.c b/arch/arm/mach-mvebu/dove.c
index 5e5a43624237..b50464ec1130 100644
--- a/arch/arm/mach-mvebu/dove.c
+++ b/arch/arm/mach-mvebu/dove.c
@@ -23,7 +23,7 @@ static void __init dove_init(void)
#ifdef CONFIG_CACHE_TAUROS2
tauros2_init(0);
#endif
- BUG_ON(mvebu_mbus_dt_init());
+ BUG_ON(mvebu_mbus_dt_init(false));
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
diff --git a/arch/arm/mach-mvebu/headsmp-a9.S b/arch/arm/mach-mvebu/headsmp-a9.S
new file mode 100644
index 000000000000..5925366bc03c
--- /dev/null
+++ b/arch/arm/mach-mvebu/headsmp-a9.S
@@ -0,0 +1,34 @@
+/*
+ * SMP support: Entry point for secondary CPUs of Marvell EBU
+ * Cortex-A9 based SOCs (Armada 375 and Armada 38x).
+ *
+ * Copyright (C) 2014 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/linkage.h>
+#include <linux/init.h>
+
+ __CPUINIT
+#define CPU_RESUME_ADDR_REG 0xf10182d4
+
+.global armada_375_smp_cpu1_enable_code_start
+.global armada_375_smp_cpu1_enable_code_end
+
+armada_375_smp_cpu1_enable_code_start:
+ ldr r0, [pc, #4]
+ ldr r1, [r0]
+ mov pc, r1
+ .word CPU_RESUME_ADDR_REG
+armada_375_smp_cpu1_enable_code_end:
+
+ENTRY(mvebu_cortex_a9_secondary_startup)
+ bl v7_invalidate_l1
+ b secondary_startup
+ENDPROC(mvebu_cortex_a9_secondary_startup)
diff --git a/arch/arm/mach-mvebu/headsmp.S b/arch/arm/mach-mvebu/headsmp.S
index 3dd80df428f7..2c4032e368ba 100644
--- a/arch/arm/mach-mvebu/headsmp.S
+++ b/arch/arm/mach-mvebu/headsmp.S
@@ -31,21 +31,10 @@
ENTRY(armada_xp_secondary_startup)
ARM_BE8(setend be ) @ go BE8 if entered LE
- /* Get coherency fabric base physical address */
- adr r0, 1f
- ldr r1, [r0]
- ldr r0, [r0, r1]
+ bl ll_add_cpu_to_smp_group
- /* Read CPU id */
- mrc p15, 0, r1, c0, c0, 5
- and r1, r1, #0xF
+ bl ll_enable_coherency
- /* Add CPU to coherency fabric */
- bl ll_set_cpu_coherent
b secondary_startup
ENDPROC(armada_xp_secondary_startup)
-
- .align 2
-1:
- .long coherency_phys_base - .
diff --git a/arch/arm/mach-mvebu/kirkwood.c b/arch/arm/mach-mvebu/kirkwood.c
index 120207fc36f1..46f105913c84 100644
--- a/arch/arm/mach-mvebu/kirkwood.c
+++ b/arch/arm/mach-mvebu/kirkwood.c
@@ -169,7 +169,7 @@ static void __init kirkwood_dt_init(void)
{
kirkwood_disable_mbus_error_propagation();
- BUG_ON(mvebu_mbus_dt_init());
+ BUG_ON(mvebu_mbus_dt_init(false));
#ifdef CONFIG_CACHE_FEROCEON_L2
feroceon_of_init();
@@ -180,9 +180,6 @@ static void __init kirkwood_dt_init(void)
kirkwood_pm_init();
kirkwood_dt_eth_fixup();
- if (of_machine_is_compatible("hp,t5325"))
- t5325_init();
-
of_platform_populate(NULL, of_default_bus_match_table, auxdata, NULL);
}
diff --git a/arch/arm/mach-mvebu/mvebu-soc-id.c b/arch/arm/mach-mvebu/mvebu-soc-id.c
index 09520e19b78e..d0f35b4d4a23 100644
--- a/arch/arm/mach-mvebu/mvebu-soc-id.c
+++ b/arch/arm/mach-mvebu/mvebu-soc-id.c
@@ -23,6 +23,8 @@
#include <linux/kernel.h>
#include <linux/of.h>
#include <linux/of_address.h>
+#include <linux/slab.h>
+#include <linux/sys_soc.h>
#include "mvebu-soc-id.h"
#define PCIE_DEV_ID_OFF 0x0
@@ -127,5 +129,33 @@ clk_err:
return ret;
}
-core_initcall(mvebu_soc_id_init);
+early_initcall(mvebu_soc_id_init);
+static int __init mvebu_soc_device(void)
+{
+ struct soc_device_attribute *soc_dev_attr;
+ struct soc_device *soc_dev;
+
+ /* Also protects against running on non-mvebu systems */
+ if (!is_id_valid)
+ return 0;
+
+ soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
+ if (!soc_dev_attr)
+ return -ENOMEM;
+
+ soc_dev_attr->family = kasprintf(GFP_KERNEL, "Marvell");
+ soc_dev_attr->revision = kasprintf(GFP_KERNEL, "%X", soc_rev);
+ soc_dev_attr->soc_id = kasprintf(GFP_KERNEL, "%X", soc_dev_id);
+
+ soc_dev = soc_device_register(soc_dev_attr);
+ if (IS_ERR(soc_dev)) {
+ kfree(soc_dev_attr->family);
+ kfree(soc_dev_attr->revision);
+ kfree(soc_dev_attr->soc_id);
+ kfree(soc_dev_attr);
+ }
+
+ return 0;
+}
+postcore_initcall(mvebu_soc_device);
diff --git a/arch/arm/mach-mvebu/mvebu-soc-id.h b/arch/arm/mach-mvebu/mvebu-soc-id.h
index 31654252fe35..c16bb68ca81f 100644
--- a/arch/arm/mach-mvebu/mvebu-soc-id.h
+++ b/arch/arm/mach-mvebu/mvebu-soc-id.h
@@ -20,6 +20,10 @@
#define MV78XX0_A0_REV 0x1
#define MV78XX0_B0_REV 0x2
+/* Armada 375 */
+#define ARMADA_375_Z1_REV 0x0
+#define ARMADA_375_A0_REV 0x3
+
#ifdef CONFIG_ARCH_MVEBU
int mvebu_get_soc_id(u32 *dev, u32 *rev);
#else
diff --git a/arch/arm/mach-mvebu/platsmp-a9.c b/arch/arm/mach-mvebu/platsmp-a9.c
new file mode 100644
index 000000000000..96c2c59e34b6
--- /dev/null
+++ b/arch/arm/mach-mvebu/platsmp-a9.c
@@ -0,0 +1,102 @@
+/*
+ * Symmetric Multi Processing (SMP) support for Marvell EBU Cortex-A9
+ * based SOCs (Armada 375/38x).
+ *
+ * Copyright (C) 2014 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/smp.h>
+#include <linux/mbus.h>
+#include <asm/smp_scu.h>
+#include <asm/smp_plat.h>
+#include "common.h"
+#include "mvebu-soc-id.h"
+#include "pmsu.h"
+
+#define CRYPT0_ENG_ID 41
+#define CRYPT0_ENG_ATTR 0x1
+#define SRAM_PHYS_BASE 0xFFFF0000
+
+#define BOOTROM_BASE 0xFFF00000
+#define BOOTROM_SIZE 0x100000
+
+extern unsigned char armada_375_smp_cpu1_enable_code_end;
+extern unsigned char armada_375_smp_cpu1_enable_code_start;
+
+void armada_375_smp_cpu1_enable_wa(void)
+{
+ void __iomem *sram_virt_base;
+
+ mvebu_mbus_del_window(BOOTROM_BASE, BOOTROM_SIZE);
+ mvebu_mbus_add_window_by_id(CRYPT0_ENG_ID, CRYPT0_ENG_ATTR,
+ SRAM_PHYS_BASE, SZ_64K);
+ sram_virt_base = ioremap(SRAM_PHYS_BASE, SZ_64K);
+
+ memcpy(sram_virt_base, &armada_375_smp_cpu1_enable_code_start,
+ &armada_375_smp_cpu1_enable_code_end
+ - &armada_375_smp_cpu1_enable_code_start);
+}
+
+extern void mvebu_cortex_a9_secondary_startup(void);
+
+static int __cpuinit mvebu_cortex_a9_boot_secondary(unsigned int cpu,
+ struct task_struct *idle)
+{
+ int ret, hw_cpu;
+
+ pr_info("Booting CPU %d\n", cpu);
+
+ /*
+ * Write the address of secondary startup into the system-wide
+ * flags register. The boot monitor waits until it receives a
+ * soft interrupt, and then the secondary CPU branches to this
+ * address.
+ */
+ hw_cpu = cpu_logical_map(cpu);
+
+ if (of_machine_is_compatible("marvell,armada375")) {
+ u32 dev, rev;
+
+ if (mvebu_get_soc_id(&dev, &rev) == 0 &&
+ rev == ARMADA_375_Z1_REV)
+ armada_375_smp_cpu1_enable_wa();
+
+ mvebu_system_controller_set_cpu_boot_addr(mvebu_cortex_a9_secondary_startup);
+ }
+ else {
+ mvebu_pmsu_set_cpu_boot_addr(hw_cpu,
+ mvebu_cortex_a9_secondary_startup);
+ }
+
+ smp_wmb();
+ ret = mvebu_cpu_reset_deassert(hw_cpu);
+ if (ret) {
+ pr_err("Could not start the secondary CPU: %d\n", ret);
+ return ret;
+ }
+ arch_send_wakeup_ipi_mask(cpumask_of(cpu));
+
+ return 0;
+}
+
+static struct smp_operations mvebu_cortex_a9_smp_ops __initdata = {
+ .smp_boot_secondary = mvebu_cortex_a9_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+ .cpu_die = armada_xp_cpu_die,
+#endif
+};
+
+CPU_METHOD_OF_DECLARE(mvebu_armada_375_smp, "marvell,armada-375-smp",
+ &mvebu_cortex_a9_smp_ops);
+CPU_METHOD_OF_DECLARE(mvebu_armada_380_smp, "marvell,armada-380-smp",
+ &mvebu_cortex_a9_smp_ops);
diff --git a/arch/arm/mach-mvebu/platsmp.c b/arch/arm/mach-mvebu/platsmp.c
index a6da03f5b24e..88b976b31719 100644
--- a/arch/arm/mach-mvebu/platsmp.c
+++ b/arch/arm/mach-mvebu/platsmp.c
@@ -70,16 +70,19 @@ static void __init set_secondary_cpus_clock(void)
}
}
-static void armada_xp_secondary_init(unsigned int cpu)
-{
- armada_xp_mpic_smp_cpu_init();
-}
-
static int armada_xp_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
+ int ret, hw_cpu;
+
pr_info("Booting CPU %d\n", cpu);
- armada_xp_boot_cpu(cpu, armada_xp_secondary_startup);
+ hw_cpu = cpu_logical_map(cpu);
+ mvebu_pmsu_set_cpu_boot_addr(hw_cpu, armada_xp_secondary_startup);
+ ret = mvebu_cpu_reset_deassert(hw_cpu);
+ if (ret) {
+ pr_warn("unable to boot CPU: %d\n", ret);
+ return ret;
+ }
return 0;
}
@@ -90,8 +93,6 @@ static void __init armada_xp_smp_init_cpus(void)
if (ncores == 0 || ncores > ARMADA_XP_MAX_CPUS)
panic("Invalid number of CPUs in DT\n");
-
- set_smp_cross_call(armada_mpic_send_doorbell);
}
static void __init armada_xp_smp_prepare_cpus(unsigned int max_cpus)
@@ -102,7 +103,7 @@ static void __init armada_xp_smp_prepare_cpus(unsigned int max_cpus)
set_secondary_cpus_clock();
flush_cache_all();
- set_cpu_coherent(cpu_logical_map(smp_processor_id()), 0);
+ set_cpu_coherent();
/*
* In order to boot the secondary CPUs we need to ensure
@@ -124,9 +125,11 @@ static void __init armada_xp_smp_prepare_cpus(unsigned int max_cpus)
struct smp_operations armada_xp_smp_ops __initdata = {
.smp_init_cpus = armada_xp_smp_init_cpus,
.smp_prepare_cpus = armada_xp_smp_prepare_cpus,
- .smp_secondary_init = armada_xp_secondary_init,
.smp_boot_secondary = armada_xp_boot_secondary,
#ifdef CONFIG_HOTPLUG_CPU
.cpu_die = armada_xp_cpu_die,
#endif
};
+
+CPU_METHOD_OF_DECLARE(armada_xp_smp, "marvell,armada-xp-smp",
+ &armada_xp_smp_ops);
diff --git a/arch/arm/mach-mvebu/pmsu.c b/arch/arm/mach-mvebu/pmsu.c
index d71ef53107c4..53a55c8520bf 100644
--- a/arch/arm/mach-mvebu/pmsu.c
+++ b/arch/arm/mach-mvebu/pmsu.c
@@ -16,62 +16,283 @@
* other SOC units
*/
+#define pr_fmt(fmt) "mvebu-pmsu: " fmt
+
+#include <linux/cpu_pm.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/of_address.h>
#include <linux/io.h>
+#include <linux/platform_device.h>
#include <linux/smp.h>
+#include <linux/resource.h>
+#include <asm/cacheflush.h>
+#include <asm/cp15.h>
#include <asm/smp_plat.h>
-#include "pmsu.h"
+#include <asm/suspend.h>
+#include <asm/tlbflush.h>
+#include "common.h"
static void __iomem *pmsu_mp_base;
-static void __iomem *pmsu_reset_base;
-#define PMSU_BOOT_ADDR_REDIRECT_OFFSET(cpu) ((cpu * 0x100) + 0x24)
-#define PMSU_RESET_CTL_OFFSET(cpu) (cpu * 0x8)
+#define PMSU_BASE_OFFSET 0x100
+#define PMSU_REG_SIZE 0x1000
+
+/* PMSU MP registers */
+#define PMSU_CONTROL_AND_CONFIG(cpu) ((cpu * 0x100) + 0x104)
+#define PMSU_CONTROL_AND_CONFIG_DFS_REQ BIT(18)
+#define PMSU_CONTROL_AND_CONFIG_PWDDN_REQ BIT(16)
+#define PMSU_CONTROL_AND_CONFIG_L2_PWDDN BIT(20)
+
+#define PMSU_CPU_POWER_DOWN_CONTROL(cpu) ((cpu * 0x100) + 0x108)
+
+#define PMSU_CPU_POWER_DOWN_DIS_SNP_Q_SKIP BIT(0)
+
+#define PMSU_STATUS_AND_MASK(cpu) ((cpu * 0x100) + 0x10c)
+#define PMSU_STATUS_AND_MASK_CPU_IDLE_WAIT BIT(16)
+#define PMSU_STATUS_AND_MASK_SNP_Q_EMPTY_WAIT BIT(17)
+#define PMSU_STATUS_AND_MASK_IRQ_WAKEUP BIT(20)
+#define PMSU_STATUS_AND_MASK_FIQ_WAKEUP BIT(21)
+#define PMSU_STATUS_AND_MASK_DBG_WAKEUP BIT(22)
+#define PMSU_STATUS_AND_MASK_IRQ_MASK BIT(24)
+#define PMSU_STATUS_AND_MASK_FIQ_MASK BIT(25)
+
+#define PMSU_BOOT_ADDR_REDIRECT_OFFSET(cpu) ((cpu * 0x100) + 0x124)
+
+/* PMSU fabric registers */
+#define L2C_NFABRIC_PM_CTL 0x4
+#define L2C_NFABRIC_PM_CTL_PWR_DOWN BIT(20)
+
+extern void ll_disable_coherency(void);
+extern void ll_enable_coherency(void);
+
+static struct platform_device armada_xp_cpuidle_device = {
+ .name = "cpuidle-armada-370-xp",
+};
static struct of_device_id of_pmsu_table[] = {
- {.compatible = "marvell,armada-370-xp-pmsu"},
+ { .compatible = "marvell,armada-370-pmsu", },
+ { .compatible = "marvell,armada-370-xp-pmsu", },
+ { .compatible = "marvell,armada-380-pmsu", },
{ /* end of list */ },
};
-#ifdef CONFIG_SMP
-int armada_xp_boot_cpu(unsigned int cpu_id, void *boot_addr)
+void mvebu_pmsu_set_cpu_boot_addr(int hw_cpu, void *boot_addr)
{
- int reg, hw_cpu;
+ writel(virt_to_phys(boot_addr), pmsu_mp_base +
+ PMSU_BOOT_ADDR_REDIRECT_OFFSET(hw_cpu));
+}
+
+static int __init armada_370_xp_pmsu_init(void)
+{
+ struct device_node *np;
+ struct resource res;
+ int ret = 0;
+
+ np = of_find_matching_node(NULL, of_pmsu_table);
+ if (!np)
+ return 0;
+
+ pr_info("Initializing Power Management Service Unit\n");
- if (!pmsu_mp_base || !pmsu_reset_base) {
- pr_warn("Can't boot CPU. PMSU is uninitialized\n");
- return 1;
+ if (of_address_to_resource(np, 0, &res)) {
+ pr_err("unable to get resource\n");
+ ret = -ENOENT;
+ goto out;
}
- hw_cpu = cpu_logical_map(cpu_id);
+ if (of_device_is_compatible(np, "marvell,armada-370-xp-pmsu")) {
+ pr_warn(FW_WARN "deprecated pmsu binding\n");
+ res.start = res.start - PMSU_BASE_OFFSET;
+ res.end = res.start + PMSU_REG_SIZE - 1;
+ }
- writel(virt_to_phys(boot_addr), pmsu_mp_base +
- PMSU_BOOT_ADDR_REDIRECT_OFFSET(hw_cpu));
+ if (!request_mem_region(res.start, resource_size(&res),
+ np->full_name)) {
+ pr_err("unable to request region\n");
+ ret = -EBUSY;
+ goto out;
+ }
+
+ pmsu_mp_base = ioremap(res.start, resource_size(&res));
+ if (!pmsu_mp_base) {
+ pr_err("unable to map registers\n");
+ release_mem_region(res.start, resource_size(&res));
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ out:
+ of_node_put(np);
+ return ret;
+}
+
+static void armada_370_xp_pmsu_enable_l2_powerdown_onidle(void)
+{
+ u32 reg;
+
+ if (pmsu_mp_base == NULL)
+ return;
+
+ /* Enable L2 & Fabric powerdown in Deep-Idle mode - Fabric */
+ reg = readl(pmsu_mp_base + L2C_NFABRIC_PM_CTL);
+ reg |= L2C_NFABRIC_PM_CTL_PWR_DOWN;
+ writel(reg, pmsu_mp_base + L2C_NFABRIC_PM_CTL);
+}
+
+static void armada_370_xp_cpu_resume(void)
+{
+ asm volatile("bl ll_add_cpu_to_smp_group\n\t"
+ "bl ll_enable_coherency\n\t"
+ "b cpu_resume\n\t");
+}
+
+/* No locking is needed because we only access per-CPU registers */
+void armada_370_xp_pmsu_idle_prepare(bool deepidle)
+{
+ unsigned int hw_cpu = cpu_logical_map(smp_processor_id());
+ u32 reg;
+
+ if (pmsu_mp_base == NULL)
+ return;
- /* Release CPU from reset by clearing reset bit*/
- reg = readl(pmsu_reset_base + PMSU_RESET_CTL_OFFSET(hw_cpu));
- reg &= (~0x1);
- writel(reg, pmsu_reset_base + PMSU_RESET_CTL_OFFSET(hw_cpu));
+ /*
+ * Adjust the PMSU configuration to wait for WFI signal, enable
+ * IRQ and FIQ as wakeup events, set wait for snoop queue empty
+ * indication and mask IRQ and FIQ from CPU
+ */
+ reg = readl(pmsu_mp_base + PMSU_STATUS_AND_MASK(hw_cpu));
+ reg |= PMSU_STATUS_AND_MASK_CPU_IDLE_WAIT |
+ PMSU_STATUS_AND_MASK_IRQ_WAKEUP |
+ PMSU_STATUS_AND_MASK_FIQ_WAKEUP |
+ PMSU_STATUS_AND_MASK_SNP_Q_EMPTY_WAIT |
+ PMSU_STATUS_AND_MASK_IRQ_MASK |
+ PMSU_STATUS_AND_MASK_FIQ_MASK;
+ writel(reg, pmsu_mp_base + PMSU_STATUS_AND_MASK(hw_cpu));
+
+ reg = readl(pmsu_mp_base + PMSU_CONTROL_AND_CONFIG(hw_cpu));
+ /* ask HW to power down the L2 Cache if needed */
+ if (deepidle)
+ reg |= PMSU_CONTROL_AND_CONFIG_L2_PWDDN;
+
+ /* request power down */
+ reg |= PMSU_CONTROL_AND_CONFIG_PWDDN_REQ;
+ writel(reg, pmsu_mp_base + PMSU_CONTROL_AND_CONFIG(hw_cpu));
+
+ /* Disable snoop disable by HW - SW is taking care of it */
+ reg = readl(pmsu_mp_base + PMSU_CPU_POWER_DOWN_CONTROL(hw_cpu));
+ reg |= PMSU_CPU_POWER_DOWN_DIS_SNP_Q_SKIP;
+ writel(reg, pmsu_mp_base + PMSU_CPU_POWER_DOWN_CONTROL(hw_cpu));
+}
+
+static noinline int do_armada_370_xp_cpu_suspend(unsigned long deepidle)
+{
+ armada_370_xp_pmsu_idle_prepare(deepidle);
+
+ v7_exit_coherency_flush(all);
+
+ ll_disable_coherency();
+
+ dsb();
+
+ wfi();
+
+ /* If we are here, wfi failed. As processors run out of
+ * coherency for some time, tlbs might be stale, so flush them
+ */
+ local_flush_tlb_all();
+
+ ll_enable_coherency();
+
+ /* Test the CR_C bit and set it if it was cleared */
+ asm volatile(
+ "mrc p15, 0, %0, c1, c0, 0 \n\t"
+ "tst %0, #(1 << 2) \n\t"
+ "orreq %0, %0, #(1 << 2) \n\t"
+ "mcreq p15, 0, %0, c1, c0, 0 \n\t"
+ "isb "
+ : : "r" (0));
+
+ pr_warn("Failed to suspend the system\n");
return 0;
}
-#endif
-static int __init armada_370_xp_pmsu_init(void)
+static int armada_370_xp_cpu_suspend(unsigned long deepidle)
+{
+ return cpu_suspend(deepidle, do_armada_370_xp_cpu_suspend);
+}
+
+/* No locking is needed because we only access per-CPU registers */
+static noinline void armada_370_xp_pmsu_idle_restore(void)
+{
+ unsigned int hw_cpu = cpu_logical_map(smp_processor_id());
+ u32 reg;
+
+ if (pmsu_mp_base == NULL)
+ return;
+
+ /* cancel ask HW to power down the L2 Cache if possible */
+ reg = readl(pmsu_mp_base + PMSU_CONTROL_AND_CONFIG(hw_cpu));
+ reg &= ~PMSU_CONTROL_AND_CONFIG_L2_PWDDN;
+ writel(reg, pmsu_mp_base + PMSU_CONTROL_AND_CONFIG(hw_cpu));
+
+ /* cancel Enable wakeup events and mask interrupts */
+ reg = readl(pmsu_mp_base + PMSU_STATUS_AND_MASK(hw_cpu));
+ reg &= ~(PMSU_STATUS_AND_MASK_IRQ_WAKEUP | PMSU_STATUS_AND_MASK_FIQ_WAKEUP);
+ reg &= ~PMSU_STATUS_AND_MASK_CPU_IDLE_WAIT;
+ reg &= ~PMSU_STATUS_AND_MASK_SNP_Q_EMPTY_WAIT;
+ reg &= ~(PMSU_STATUS_AND_MASK_IRQ_MASK | PMSU_STATUS_AND_MASK_FIQ_MASK);
+ writel(reg, pmsu_mp_base + PMSU_STATUS_AND_MASK(hw_cpu));
+}
+
+static int armada_370_xp_cpu_pm_notify(struct notifier_block *self,
+ unsigned long action, void *hcpu)
+{
+ if (action == CPU_PM_ENTER) {
+ unsigned int hw_cpu = cpu_logical_map(smp_processor_id());
+ mvebu_pmsu_set_cpu_boot_addr(hw_cpu, armada_370_xp_cpu_resume);
+ } else if (action == CPU_PM_EXIT) {
+ armada_370_xp_pmsu_idle_restore();
+ }
+
+ return NOTIFY_OK;
+}
+
+static struct notifier_block armada_370_xp_cpu_pm_notifier = {
+ .notifier_call = armada_370_xp_cpu_pm_notify,
+};
+
+int __init armada_370_xp_cpu_pm_init(void)
{
struct device_node *np;
+ /*
+ * Check that all the requirements are available to enable
+ * cpuidle. So far, it is only supported on Armada XP, cpuidle
+ * needs the coherency fabric and the PMSU enabled
+ */
+
+ if (!of_machine_is_compatible("marvell,armadaxp"))
+ return 0;
+
+ np = of_find_compatible_node(NULL, NULL, "marvell,coherency-fabric");
+ if (!np)
+ return 0;
+ of_node_put(np);
+
np = of_find_matching_node(NULL, of_pmsu_table);
- if (np) {
- pr_info("Initializing Power Management Service Unit\n");
- pmsu_mp_base = of_iomap(np, 0);
- pmsu_reset_base = of_iomap(np, 1);
- of_node_put(np);
- }
+ if (!np)
+ return 0;
+ of_node_put(np);
+
+ armada_370_xp_pmsu_enable_l2_powerdown_onidle();
+ armada_xp_cpuidle_device.dev.platform_data = armada_370_xp_cpu_suspend;
+ platform_device_register(&armada_xp_cpuidle_device);
+ cpu_pm_register_notifier(&armada_370_xp_cpu_pm_notifier);
return 0;
}
+arch_initcall(armada_370_xp_cpu_pm_init);
early_initcall(armada_370_xp_pmsu_init);
diff --git a/arch/arm/mach-mvebu/system-controller.c b/arch/arm/mach-mvebu/system-controller.c
index 614ba6832ff3..0c5524ac75b7 100644
--- a/arch/arm/mach-mvebu/system-controller.c
+++ b/arch/arm/mach-mvebu/system-controller.c
@@ -37,6 +37,8 @@ struct mvebu_system_controller {
u32 rstoutn_mask_reset_out_en;
u32 system_soft_reset;
+
+ u32 resume_boot_addr;
};
static struct mvebu_system_controller *mvebu_sc;
@@ -52,6 +54,7 @@ static const struct mvebu_system_controller armada_375_system_controller = {
.system_soft_reset_offset = 0x58,
.rstoutn_mask_reset_out_en = 0x1,
.system_soft_reset = 0x1,
+ .resume_boot_addr = 0xd4,
};
static const struct mvebu_system_controller orion_system_controller = {
@@ -98,6 +101,16 @@ void mvebu_restart(enum reboot_mode mode, const char *cmd)
;
}
+#ifdef CONFIG_SMP
+void mvebu_system_controller_set_cpu_boot_addr(void *boot_addr)
+{
+ BUG_ON(system_controller_base == NULL);
+ BUG_ON(mvebu_sc->resume_boot_addr == 0);
+ writel(virt_to_phys(boot_addr), system_controller_base +
+ mvebu_sc->resume_boot_addr);
+}
+#endif
+
static int __init mvebu_system_controller_init(void)
{
const struct of_device_id *match;
@@ -114,4 +127,4 @@ static int __init mvebu_system_controller_init(void)
return 0;
}
-arch_initcall(mvebu_system_controller_init);
+early_initcall(mvebu_system_controller_init);
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index f61f1bf68df4..43969da5d50b 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -628,6 +628,41 @@ void __init omap5xxx_check_revision(void)
pr_info("%s %s\n", soc_name, soc_rev);
}
+void __init dra7xxx_check_revision(void)
+{
+ u32 idcode;
+ u16 hawkeye;
+ u8 rev;
+
+ idcode = read_tap_reg(OMAP_TAP_IDCODE);
+ hawkeye = (idcode >> 12) & 0xffff;
+ rev = (idcode >> 28) & 0xff;
+ switch (hawkeye) {
+ case 0xb990:
+ switch (rev) {
+ case 0:
+ omap_revision = DRA752_REV_ES1_0;
+ break;
+ case 1:
+ default:
+ omap_revision = DRA752_REV_ES1_1;
+ }
+ break;
+
+ default:
+ /* Unknown default to latest silicon rev as default*/
+ pr_warn("%s: unknown idcode=0x%08x (hawkeye=0x%08x,rev=0x%d)\n",
+ __func__, idcode, hawkeye, rev);
+ omap_revision = DRA752_REV_ES1_1;
+ }
+
+ sprintf(soc_name, "DRA%03x", omap_rev() >> 16);
+ sprintf(soc_rev, "ES%d.%d", (omap_rev() >> 12) & 0xf,
+ (omap_rev() >> 8) & 0xf);
+
+ pr_info("%s %s\n", soc_name, soc_rev);
+}
+
/*
* Set up things for map_io and processor detection later on. Gets called
* pretty much first thing from board init. For multi-omap, this gets
@@ -669,6 +704,8 @@ static const char * __init omap_get_family(void)
return kasprintf(GFP_KERNEL, "OMAP5");
else if (soc_is_am43xx())
return kasprintf(GFP_KERNEL, "AM43xx");
+ else if (soc_is_dra7xx())
+ return kasprintf(GFP_KERNEL, "DRA7");
else
return kasprintf(GFP_KERNEL, "Unknown");
}
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index f14f9ac2dca1..4ec3b4a93843 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -693,6 +693,7 @@ void __init dra7xx_init_early(void)
omap_prm_base_init();
omap_cm_base_init();
omap44xx_prm_init();
+ dra7xxx_check_revision();
dra7xx_powerdomains_init();
dra7xx_clockdomains_init();
dra7xx_hwmod_init();
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index 1219280bb976..41e54f759934 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -3635,15 +3635,7 @@ static struct omap_hwmod_ocp_if omap44xx_l4_abe__dmic = {
.master = &omap44xx_l4_abe_hwmod,
.slave = &omap44xx_dmic_hwmod,
.clk = "ocp_abe_iclk",
- .user = OCP_USER_MPU,
-};
-
-/* l4_abe -> dmic (dma) */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__dmic_dma = {
- .master = &omap44xx_l4_abe_hwmod,
- .slave = &omap44xx_dmic_hwmod,
- .clk = "ocp_abe_iclk",
- .user = OCP_USER_SDMA,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* dsp -> iva */
@@ -4209,15 +4201,7 @@ static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcbsp1 = {
.master = &omap44xx_l4_abe_hwmod,
.slave = &omap44xx_mcbsp1_hwmod,
.clk = "ocp_abe_iclk",
- .user = OCP_USER_MPU,
-};
-
-/* l4_abe -> mcbsp1 (dma) */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcbsp1_dma = {
- .master = &omap44xx_l4_abe_hwmod,
- .slave = &omap44xx_mcbsp1_hwmod,
- .clk = "ocp_abe_iclk",
- .user = OCP_USER_SDMA,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l4_abe -> mcbsp2 */
@@ -4225,15 +4209,7 @@ static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcbsp2 = {
.master = &omap44xx_l4_abe_hwmod,
.slave = &omap44xx_mcbsp2_hwmod,
.clk = "ocp_abe_iclk",
- .user = OCP_USER_MPU,
-};
-
-/* l4_abe -> mcbsp2 (dma) */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcbsp2_dma = {
- .master = &omap44xx_l4_abe_hwmod,
- .slave = &omap44xx_mcbsp2_hwmod,
- .clk = "ocp_abe_iclk",
- .user = OCP_USER_SDMA,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l4_abe -> mcbsp3 */
@@ -4241,15 +4217,7 @@ static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcbsp3 = {
.master = &omap44xx_l4_abe_hwmod,
.slave = &omap44xx_mcbsp3_hwmod,
.clk = "ocp_abe_iclk",
- .user = OCP_USER_MPU,
-};
-
-/* l4_abe -> mcbsp3 (dma) */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcbsp3_dma = {
- .master = &omap44xx_l4_abe_hwmod,
- .slave = &omap44xx_mcbsp3_hwmod,
- .clk = "ocp_abe_iclk",
- .user = OCP_USER_SDMA,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l4_per -> mcbsp4 */
@@ -4265,15 +4233,7 @@ static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcpdm = {
.master = &omap44xx_l4_abe_hwmod,
.slave = &omap44xx_mcpdm_hwmod,
.clk = "ocp_abe_iclk",
- .user = OCP_USER_MPU,
-};
-
-/* l4_abe -> mcpdm (dma) */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcpdm_dma = {
- .master = &omap44xx_l4_abe_hwmod,
- .slave = &omap44xx_mcpdm_hwmod,
- .clk = "ocp_abe_iclk",
- .user = OCP_USER_SDMA,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l4_per -> mcspi1 */
@@ -4575,15 +4535,7 @@ static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer5 = {
.master = &omap44xx_l4_abe_hwmod,
.slave = &omap44xx_timer5_hwmod,
.clk = "ocp_abe_iclk",
- .user = OCP_USER_MPU,
-};
-
-/* l4_abe -> timer5 (dma) */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer5_dma = {
- .master = &omap44xx_l4_abe_hwmod,
- .slave = &omap44xx_timer5_hwmod,
- .clk = "ocp_abe_iclk",
- .user = OCP_USER_SDMA,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l4_abe -> timer6 */
@@ -4591,15 +4543,7 @@ static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer6 = {
.master = &omap44xx_l4_abe_hwmod,
.slave = &omap44xx_timer6_hwmod,
.clk = "ocp_abe_iclk",
- .user = OCP_USER_MPU,
-};
-
-/* l4_abe -> timer6 (dma) */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer6_dma = {
- .master = &omap44xx_l4_abe_hwmod,
- .slave = &omap44xx_timer6_hwmod,
- .clk = "ocp_abe_iclk",
- .user = OCP_USER_SDMA,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l4_abe -> timer7 */
@@ -4607,15 +4551,7 @@ static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer7 = {
.master = &omap44xx_l4_abe_hwmod,
.slave = &omap44xx_timer7_hwmod,
.clk = "ocp_abe_iclk",
- .user = OCP_USER_MPU,
-};
-
-/* l4_abe -> timer7 (dma) */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer7_dma = {
- .master = &omap44xx_l4_abe_hwmod,
- .slave = &omap44xx_timer7_hwmod,
- .clk = "ocp_abe_iclk",
- .user = OCP_USER_SDMA,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l4_abe -> timer8 */
@@ -4623,15 +4559,7 @@ static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer8 = {
.master = &omap44xx_l4_abe_hwmod,
.slave = &omap44xx_timer8_hwmod,
.clk = "ocp_abe_iclk",
- .user = OCP_USER_MPU,
-};
-
-/* l4_abe -> timer8 (dma) */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer8_dma = {
- .master = &omap44xx_l4_abe_hwmod,
- .slave = &omap44xx_timer8_hwmod,
- .clk = "ocp_abe_iclk",
- .user = OCP_USER_SDMA,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l4_per -> timer9 */
@@ -4831,7 +4759,6 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = {
&omap44xx_l3_instr__debugss,
&omap44xx_l4_cfg__dma_system,
&omap44xx_l4_abe__dmic,
- &omap44xx_l4_abe__dmic_dma,
&omap44xx_dsp__iva,
/* &omap44xx_dsp__sl2if, */
&omap44xx_l4_cfg__dsp,
@@ -4874,14 +4801,10 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = {
&omap44xx_l4_abe__mcasp,
&omap44xx_l4_abe__mcasp_dma,
&omap44xx_l4_abe__mcbsp1,
- &omap44xx_l4_abe__mcbsp1_dma,
&omap44xx_l4_abe__mcbsp2,
- &omap44xx_l4_abe__mcbsp2_dma,
&omap44xx_l4_abe__mcbsp3,
- &omap44xx_l4_abe__mcbsp3_dma,
&omap44xx_l4_per__mcbsp4,
&omap44xx_l4_abe__mcpdm,
- &omap44xx_l4_abe__mcpdm_dma,
&omap44xx_l4_per__mcspi1,
&omap44xx_l4_per__mcspi2,
&omap44xx_l4_per__mcspi3,
@@ -4913,13 +4836,9 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = {
&omap44xx_l4_per__timer3,
&omap44xx_l4_per__timer4,
&omap44xx_l4_abe__timer5,
- &omap44xx_l4_abe__timer5_dma,
&omap44xx_l4_abe__timer6,
- &omap44xx_l4_abe__timer6_dma,
&omap44xx_l4_abe__timer7,
- &omap44xx_l4_abe__timer7_dma,
&omap44xx_l4_abe__timer8,
- &omap44xx_l4_abe__timer8_dma,
&omap44xx_l4_per__timer9,
&omap44xx_l4_per__timer10,
&omap44xx_l4_per__timer11,
diff --git a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
index e829664e6a6c..290213f2cbe3 100644
--- a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
@@ -334,6 +334,235 @@ static struct omap_hwmod omap54xx_dmic_hwmod = {
};
/*
+ * 'dss' class
+ * display sub-system
+ */
+static struct omap_hwmod_class_sysconfig omap54xx_dss_sysc = {
+ .rev_offs = 0x0000,
+ .syss_offs = 0x0014,
+ .sysc_flags = SYSS_HAS_RESET_STATUS,
+};
+
+static struct omap_hwmod_class omap54xx_dss_hwmod_class = {
+ .name = "dss",
+ .sysc = &omap54xx_dss_sysc,
+ .reset = omap_dss_reset,
+};
+
+/* dss */
+static struct omap_hwmod_opt_clk dss_opt_clks[] = {
+ { .role = "32khz_clk", .clk = "dss_32khz_clk" },
+ { .role = "sys_clk", .clk = "dss_sys_clk" },
+ { .role = "hdmi_clk", .clk = "dss_48mhz_clk" },
+};
+
+static struct omap_hwmod omap54xx_dss_hwmod = {
+ .name = "dss_core",
+ .class = &omap54xx_dss_hwmod_class,
+ .clkdm_name = "dss_clkdm",
+ .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
+ .main_clk = "dss_dss_clk",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = OMAP54XX_CM_DSS_DSS_CLKCTRL_OFFSET,
+ .context_offs = OMAP54XX_RM_DSS_DSS_CONTEXT_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+ .opt_clks = dss_opt_clks,
+ .opt_clks_cnt = ARRAY_SIZE(dss_opt_clks),
+};
+
+/*
+ * 'dispc' class
+ * display controller
+ */
+
+static struct omap_hwmod_class_sysconfig omap54xx_dispc_sysc = {
+ .rev_offs = 0x0000,
+ .sysc_offs = 0x0010,
+ .syss_offs = 0x0014,
+ .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY |
+ SYSC_HAS_ENAWAKEUP | SYSC_HAS_MIDLEMODE |
+ SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
+ SYSS_HAS_RESET_STATUS),
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+ MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART),
+ .sysc_fields = &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class omap54xx_dispc_hwmod_class = {
+ .name = "dispc",
+ .sysc = &omap54xx_dispc_sysc,
+};
+
+/* dss_dispc */
+static struct omap_hwmod_opt_clk dss_dispc_opt_clks[] = {
+ { .role = "sys_clk", .clk = "dss_sys_clk" },
+};
+
+/* dss_dispc dev_attr */
+static struct omap_dss_dispc_dev_attr dss_dispc_dev_attr = {
+ .has_framedonetv_irq = 1,
+ .manager_count = 4,
+};
+
+static struct omap_hwmod omap54xx_dss_dispc_hwmod = {
+ .name = "dss_dispc",
+ .class = &omap54xx_dispc_hwmod_class,
+ .clkdm_name = "dss_clkdm",
+ .main_clk = "dss_dss_clk",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = OMAP54XX_CM_DSS_DSS_CLKCTRL_OFFSET,
+ .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT,
+ },
+ },
+ .opt_clks = dss_dispc_opt_clks,
+ .opt_clks_cnt = ARRAY_SIZE(dss_dispc_opt_clks),
+ .dev_attr = &dss_dispc_dev_attr,
+};
+
+/*
+ * 'dsi1' class
+ * display serial interface controller
+ */
+
+static struct omap_hwmod_class_sysconfig omap54xx_dsi1_sysc = {
+ .rev_offs = 0x0000,
+ .sysc_offs = 0x0010,
+ .syss_offs = 0x0014,
+ .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY |
+ SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE |
+ SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+ .sysc_fields = &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class omap54xx_dsi1_hwmod_class = {
+ .name = "dsi1",
+ .sysc = &omap54xx_dsi1_sysc,
+};
+
+/* dss_dsi1_a */
+static struct omap_hwmod_opt_clk dss_dsi1_a_opt_clks[] = {
+ { .role = "sys_clk", .clk = "dss_sys_clk" },
+};
+
+static struct omap_hwmod omap54xx_dss_dsi1_a_hwmod = {
+ .name = "dss_dsi1",
+ .class = &omap54xx_dsi1_hwmod_class,
+ .clkdm_name = "dss_clkdm",
+ .main_clk = "dss_dss_clk",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = OMAP54XX_CM_DSS_DSS_CLKCTRL_OFFSET,
+ .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT,
+ },
+ },
+ .opt_clks = dss_dsi1_a_opt_clks,
+ .opt_clks_cnt = ARRAY_SIZE(dss_dsi1_a_opt_clks),
+};
+
+/* dss_dsi1_c */
+static struct omap_hwmod_opt_clk dss_dsi1_c_opt_clks[] = {
+ { .role = "sys_clk", .clk = "dss_sys_clk" },
+};
+
+static struct omap_hwmod omap54xx_dss_dsi1_c_hwmod = {
+ .name = "dss_dsi2",
+ .class = &omap54xx_dsi1_hwmod_class,
+ .clkdm_name = "dss_clkdm",
+ .main_clk = "dss_dss_clk",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = OMAP54XX_CM_DSS_DSS_CLKCTRL_OFFSET,
+ .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT,
+ },
+ },
+ .opt_clks = dss_dsi1_c_opt_clks,
+ .opt_clks_cnt = ARRAY_SIZE(dss_dsi1_c_opt_clks),
+};
+
+/*
+ * 'hdmi' class
+ * hdmi controller
+ */
+
+static struct omap_hwmod_class_sysconfig omap54xx_hdmi_sysc = {
+ .rev_offs = 0x0000,
+ .sysc_offs = 0x0010,
+ .sysc_flags = (SYSC_HAS_RESET_STATUS | SYSC_HAS_SIDLEMODE |
+ SYSC_HAS_SOFTRESET),
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+ SIDLE_SMART_WKUP),
+ .sysc_fields = &omap_hwmod_sysc_type2,
+};
+
+static struct omap_hwmod_class omap54xx_hdmi_hwmod_class = {
+ .name = "hdmi",
+ .sysc = &omap54xx_hdmi_sysc,
+};
+
+static struct omap_hwmod_opt_clk dss_hdmi_opt_clks[] = {
+ { .role = "sys_clk", .clk = "dss_sys_clk" },
+};
+
+static struct omap_hwmod omap54xx_dss_hdmi_hwmod = {
+ .name = "dss_hdmi",
+ .class = &omap54xx_hdmi_hwmod_class,
+ .clkdm_name = "dss_clkdm",
+ .main_clk = "dss_48mhz_clk",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = OMAP54XX_CM_DSS_DSS_CLKCTRL_OFFSET,
+ .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT,
+ },
+ },
+ .opt_clks = dss_hdmi_opt_clks,
+ .opt_clks_cnt = ARRAY_SIZE(dss_hdmi_opt_clks),
+};
+
+/*
+ * 'rfbi' class
+ * remote frame buffer interface
+ */
+
+static struct omap_hwmod_class_sysconfig omap54xx_rfbi_sysc = {
+ .rev_offs = 0x0000,
+ .sysc_offs = 0x0010,
+ .syss_offs = 0x0014,
+ .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_SIDLEMODE |
+ SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+ .sysc_fields = &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class omap54xx_rfbi_hwmod_class = {
+ .name = "rfbi",
+ .sysc = &omap54xx_rfbi_sysc,
+};
+
+/* dss_rfbi */
+static struct omap_hwmod_opt_clk dss_rfbi_opt_clks[] = {
+ { .role = "ick", .clk = "l3_iclk_div" },
+};
+
+static struct omap_hwmod omap54xx_dss_rfbi_hwmod = {
+ .name = "dss_rfbi",
+ .class = &omap54xx_rfbi_hwmod_class,
+ .clkdm_name = "dss_clkdm",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = OMAP54XX_CM_DSS_DSS_CLKCTRL_OFFSET,
+ .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT,
+ },
+ },
+ .opt_clks = dss_rfbi_opt_clks,
+ .opt_clks_cnt = ARRAY_SIZE(dss_rfbi_opt_clks),
+};
+
+/*
* 'emif' class
* external memory interface no1 (wrapper)
*/
@@ -1974,6 +2203,54 @@ static struct omap_hwmod_ocp_if omap54xx_l4_abe__dmic = {
.user = OCP_USER_MPU,
};
+/* l3_main_2 -> dss */
+static struct omap_hwmod_ocp_if omap54xx_l3_main_2__dss = {
+ .master = &omap54xx_l3_main_2_hwmod,
+ .slave = &omap54xx_dss_hwmod,
+ .clk = "l3_iclk_div",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3_main_2 -> dss_dispc */
+static struct omap_hwmod_ocp_if omap54xx_l3_main_2__dss_dispc = {
+ .master = &omap54xx_l3_main_2_hwmod,
+ .slave = &omap54xx_dss_dispc_hwmod,
+ .clk = "l3_iclk_div",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3_main_2 -> dss_dsi1_a */
+static struct omap_hwmod_ocp_if omap54xx_l3_main_2__dss_dsi1_a = {
+ .master = &omap54xx_l3_main_2_hwmod,
+ .slave = &omap54xx_dss_dsi1_a_hwmod,
+ .clk = "l3_iclk_div",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3_main_2 -> dss_dsi1_c */
+static struct omap_hwmod_ocp_if omap54xx_l3_main_2__dss_dsi1_c = {
+ .master = &omap54xx_l3_main_2_hwmod,
+ .slave = &omap54xx_dss_dsi1_c_hwmod,
+ .clk = "l3_iclk_div",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3_main_2 -> dss_hdmi */
+static struct omap_hwmod_ocp_if omap54xx_l3_main_2__dss_hdmi = {
+ .master = &omap54xx_l3_main_2_hwmod,
+ .slave = &omap54xx_dss_hdmi_hwmod,
+ .clk = "l3_iclk_div",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3_main_2 -> dss_rfbi */
+static struct omap_hwmod_ocp_if omap54xx_l3_main_2__dss_rfbi = {
+ .master = &omap54xx_l3_main_2_hwmod,
+ .slave = &omap54xx_dss_rfbi_hwmod,
+ .clk = "l3_iclk_div",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
/* mpu -> emif1 */
static struct omap_hwmod_ocp_if omap54xx_mpu__emif1 = {
.master = &omap54xx_mpu_hwmod,
@@ -2427,6 +2704,12 @@ static struct omap_hwmod_ocp_if *omap54xx_hwmod_ocp_ifs[] __initdata = {
&omap54xx_l4_cfg__dma_system,
&omap54xx_l4_abe__dmic,
&omap54xx_l4_cfg__mmu_dsp,
+ &omap54xx_l3_main_2__dss,
+ &omap54xx_l3_main_2__dss_dispc,
+ &omap54xx_l3_main_2__dss_dsi1_a,
+ &omap54xx_l3_main_2__dss_dsi1_c,
+ &omap54xx_l3_main_2__dss_hdmi,
+ &omap54xx_l3_main_2__dss_rfbi,
&omap54xx_mpu__emif1,
&omap54xx_mpu__emif2,
&omap54xx_l4_wkup__gpio1,
diff --git a/arch/arm/mach-omap2/omap_twl.c b/arch/arm/mach-omap2/omap_twl.c
index 615e5b1fb025..6bf626700557 100644
--- a/arch/arm/mach-omap2/omap_twl.c
+++ b/arch/arm/mach-omap2/omap_twl.c
@@ -46,15 +46,8 @@
static bool is_offset_valid;
static u8 smps_offset;
-/*
- * Flag to ensure Smartreflex bit in TWL
- * being cleared in board file is not overwritten.
- */
-static bool __initdata twl_sr_enable_autoinit;
-#define TWL4030_DCDC_GLOBAL_CFG 0x06
#define REG_SMPS_OFFSET 0xE0
-#define SMARTREFLEX_ENABLE BIT(3)
static unsigned long twl4030_vsel_to_uv(const u8 vsel)
{
@@ -251,18 +244,6 @@ int __init omap3_twl_init(void)
if (!cpu_is_omap34xx())
return -ENODEV;
- /*
- * The smartreflex bit on twl4030 specifies if the setting of voltage
- * is done over the I2C_SR path. Since this setting is independent of
- * the actual usage of smartreflex AVS module, we enable TWL SR bit
- * by default irrespective of whether smartreflex AVS module is enabled
- * on the OMAP side or not. This is because without this bit enabled,
- * the voltage scaling through vp forceupdate/bypass mechanism of
- * voltage scaling will not function on TWL over I2C_SR.
- */
- if (!twl_sr_enable_autoinit)
- omap3_twl_set_sr_bit(true);
-
voltdm = voltdm_lookup("mpu_iva");
omap_voltage_register_pmic(voltdm, &omap3_mpu_pmic);
@@ -271,44 +252,3 @@ int __init omap3_twl_init(void)
return 0;
}
-
-/**
- * omap3_twl_set_sr_bit() - Set/Clear SR bit on TWL
- * @enable: enable SR mode in twl or not
- *
- * If 'enable' is true, enables Smartreflex bit on TWL 4030 to make sure
- * voltage scaling through OMAP SR works. Else, the smartreflex bit
- * on twl4030 is cleared as there are platforms which use OMAP3 and T2 but
- * use Synchronized Scaling Hardware Strategy (ENABLE_VMODE=1) and Direct
- * Strategy Software Scaling Mode (ENABLE_VMODE=0), for setting the voltages,
- * in those scenarios this bit is to be cleared (enable = false).
- *
- * Returns 0 on success, error is returned if I2C read/write fails.
- */
-int __init omap3_twl_set_sr_bit(bool enable)
-{
- u8 temp;
- int ret;
- if (twl_sr_enable_autoinit)
- pr_warning("%s: unexpected multiple calls\n", __func__);
-
- ret = twl_i2c_read_u8(TWL_MODULE_PM_RECEIVER, &temp,
- TWL4030_DCDC_GLOBAL_CFG);
- if (ret)
- goto err;
-
- if (enable)
- temp |= SMARTREFLEX_ENABLE;
- else
- temp &= ~SMARTREFLEX_ENABLE;
-
- ret = twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, temp,
- TWL4030_DCDC_GLOBAL_CFG);
- if (!ret) {
- twl_sr_enable_autoinit = true;
- return 0;
- }
-err:
- pr_err("%s: Error access to TWL4030 (%d)\n", __func__, ret);
- return ret;
-}
diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
index e1b41416fbf1..828aee9ea6a8 100644
--- a/arch/arm/mach-omap2/pm.c
+++ b/arch/arm/mach-omap2/pm.c
@@ -32,11 +32,13 @@
#include "pm.h"
#include "twl-common.h"
+#ifdef CONFIG_SUSPEND
/*
* omap_pm_suspend: points to a function that does the SoC-specific
* suspend work
*/
-int (*omap_pm_suspend)(void);
+static int (*omap_pm_suspend)(void);
+#endif
#ifdef CONFIG_PM
/**
@@ -243,6 +245,15 @@ static const struct platform_suspend_ops omap_pm_ops = {
.valid = suspend_valid_only_mem,
};
+/**
+ * omap_common_suspend_init - Set common suspend routines for OMAP SoCs
+ * @pm_suspend: function pointer to SoC specific suspend function
+ */
+void omap_common_suspend_init(void *pm_suspend)
+{
+ omap_pm_suspend = pm_suspend;
+ suspend_set_ops(&omap_pm_ops);
+}
#endif /* CONFIG_SUSPEND */
static void __init omap3_init_voltages(void)
@@ -287,32 +298,24 @@ omap_postcore_initcall(omap2_common_pm_init);
int __init omap2_common_pm_late_init(void)
{
- /*
- * In the case of DT, the PMIC and SR initialization will be done using
- * a completely different mechanism.
- * Disable this part if a DT blob is available.
- */
- if (!of_have_populated_dt()) {
-
- /* Init the voltage layer */
- omap_pmic_late_init();
- omap_voltage_late_init();
+ if (of_have_populated_dt()) {
+ omap3_twl_init();
+ omap4_twl_init();
+ }
- /* Initialize the voltages */
- omap3_init_voltages();
- omap4_init_voltages();
+ /* Init the voltage layer */
+ omap_pmic_late_init();
+ omap_voltage_late_init();
- /* Smartreflex device init */
- omap_devinit_smartreflex();
+ /* Initialize the voltages */
+ omap3_init_voltages();
+ omap4_init_voltages();
- }
+ /* Smartreflex device init */
+ omap_devinit_smartreflex();
/* cpufreq dummy device instantiation */
omap_init_cpufreq();
-#ifdef CONFIG_SUSPEND
- suspend_set_ops(&omap_pm_ops);
-#endif
-
return 0;
}
diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h
index d4d0fce325c7..e150102d6c06 100644
--- a/arch/arm/mach-omap2/pm.h
+++ b/arch/arm/mach-omap2/pm.h
@@ -34,7 +34,6 @@ extern void *omap3_secure_ram_storage;
extern void omap3_pm_off_mode_enable(int);
extern void omap_sram_idle(void);
extern int omap_pm_clkdms_setup(struct clockdomain *clkdm, void *unused);
-extern int (*omap_pm_suspend)(void);
#if defined(CONFIG_PM_OPP)
extern int omap3_opp_init(void);
@@ -147,4 +146,11 @@ static inline void omap_pm_get_oscillator(u32 *tstart, u32 *tshut) { *tstart = *
static inline void omap_pm_setup_sr_i2c_pcb_length(u32 mm) { }
#endif
+#ifdef CONFIG_SUSPEND
+void omap_common_suspend_init(void *pm_suspend);
+#else
+static inline void omap_common_suspend_init(void *pm_suspend)
+{
+}
+#endif /* CONFIG_SUSPEND */
#endif
diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c
index 8c0759496c8d..a5ea988ff340 100644
--- a/arch/arm/mach-omap2/pm24xx.c
+++ b/arch/arm/mach-omap2/pm24xx.c
@@ -229,9 +229,7 @@ static void __init prcm_setup_regs(void)
clkdm_for_each(omap_pm_clkdms_setup, NULL);
clkdm_add_wkdep(mpu_clkdm, wkup_clkdm);
-#ifdef CONFIG_SUSPEND
- omap_pm_suspend = omap2_enter_full_retention;
-#endif
+ omap_common_suspend_init(omap2_enter_full_retention);
/* REVISIT: Configure number of 32 kHz clock cycles for sys_clk
* stabilisation */
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 87099bb6de69..507d8eeaab95 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -50,6 +50,7 @@
#include "sdrc.h"
#include "sram.h"
#include "control.h"
+#include "vc.h"
/* pm34xx errata defined in pm.h */
u16 pm34xx_errata;
@@ -288,6 +289,9 @@ void omap_sram_idle(void)
}
}
+ /* Configure PMIC signaling for I2C4 or sys_off_mode */
+ omap3_vc_set_pmic_signaling(core_next_state);
+
omap3_intc_prepare_idle();
/*
@@ -391,7 +395,8 @@ restore:
return ret;
}
-
+#else
+#define omap3_pm_suspend NULL
#endif /* CONFIG_SUSPEND */
@@ -705,9 +710,7 @@ int __init omap3_pm_init(void)
per_clkdm = clkdm_lookup("per_clkdm");
wkup_clkdm = clkdm_lookup("wkup_clkdm");
-#ifdef CONFIG_SUSPEND
- omap_pm_suspend = omap3_pm_suspend;
-#endif
+ omap_common_suspend_init(omap3_pm_suspend);
arm_pm_idle = omap3_pm_idle;
omap3_idle_init();
diff --git a/arch/arm/mach-omap2/pm44xx.c b/arch/arm/mach-omap2/pm44xx.c
index eefb30cfcabd..0dda6cf8b855 100644
--- a/arch/arm/mach-omap2/pm44xx.c
+++ b/arch/arm/mach-omap2/pm44xx.c
@@ -96,6 +96,8 @@ static int omap4_pm_suspend(void)
return 0;
}
+#else
+#define omap4_pm_suspend NULL
#endif /* CONFIG_SUSPEND */
static int __init pwrdms_setup(struct powerdomain *pwrdm, void *unused)
@@ -251,9 +253,7 @@ int __init omap4_pm_init(void)
(void) clkdm_for_each(omap_pm_clkdms_setup, NULL);
-#ifdef CONFIG_SUSPEND
- omap_pm_suspend = omap4_pm_suspend;
-#endif
+ omap_common_suspend_init(omap4_pm_suspend);
/* Overwrite the default cpu_do_idle() */
arm_pm_idle = omap_default_idle;
diff --git a/arch/arm/mach-omap2/prm-regbits-34xx.h b/arch/arm/mach-omap2/prm-regbits-34xx.h
index cebad565ed37..106132db532b 100644
--- a/arch/arm/mach-omap2/prm-regbits-34xx.h
+++ b/arch/arm/mach-omap2/prm-regbits-34xx.h
@@ -123,8 +123,15 @@
#define OMAP3430_GLOBAL_SW_RST_SHIFT 1
#define OMAP3430_GLOBAL_COLD_RST_SHIFT 0
#define OMAP3430_GLOBAL_COLD_RST_MASK (1 << 0)
-#define OMAP3430_SEL_OFF_MASK (1 << 3)
-#define OMAP3430_AUTO_OFF_MASK (1 << 2)
+#define OMAP3430_PRM_VOLTCTRL_SEL_VMODE (1 << 4)
+#define OMAP3430_PRM_VOLTCTRL_SEL_OFF (1 << 3)
+#define OMAP3430_PRM_VOLTCTRL_AUTO_OFF (1 << 2)
+#define OMAP3430_PRM_VOLTCTRL_AUTO_RET (1 << 1)
+#define OMAP3430_PRM_VOLTCTRL_AUTO_SLEEP (1 << 0)
#define OMAP3430_SETUP_TIME2_MASK (0xffff << 16)
#define OMAP3430_SETUP_TIME1_MASK (0xffff << 0)
+#define OMAP3430_PRM_POLCTRL_OFFMODE_POL (1 << 3)
+#define OMAP3430_PRM_POLCTRL_CLKOUT_POL (1 << 2)
+#define OMAP3430_PRM_POLCTRL_CLKREQ_POL (1 << 1)
+#define OMAP3430_PRM_POLCTRL_EXTVOL_POL (1 << 0)
#endif
diff --git a/arch/arm/mach-omap2/soc.h b/arch/arm/mach-omap2/soc.h
index 30abcc8b20e0..de2a34c423a7 100644
--- a/arch/arm/mach-omap2/soc.h
+++ b/arch/arm/mach-omap2/soc.h
@@ -459,10 +459,15 @@ IS_OMAP_TYPE(3430, 0x3430)
#define OMAP5430_REV_ES2_0 (OMAP54XX_CLASS | (0x30 << 16) | (0x20 << 8))
#define OMAP5432_REV_ES2_0 (OMAP54XX_CLASS | (0x32 << 16) | (0x20 << 8))
+#define DRA7XX_CLASS 0x07000000
+#define DRA752_REV_ES1_0 (DRA7XX_CLASS | (0x52 << 16) | (0x10 << 8))
+#define DRA752_REV_ES1_1 (DRA7XX_CLASS | (0x52 << 16) | (0x11 << 8))
+
void omap2xxx_check_revision(void);
void omap3xxx_check_revision(void);
void omap4xxx_check_revision(void);
void omap5xxx_check_revision(void);
+void dra7xxx_check_revision(void);
void omap3xxx_check_features(void);
void ti81xx_check_features(void);
void am33xx_check_features(void);
diff --git a/arch/arm/mach-omap2/vc.c b/arch/arm/mach-omap2/vc.c
index 267f204559c3..a4628a9e760c 100644
--- a/arch/arm/mach-omap2/vc.c
+++ b/arch/arm/mach-omap2/vc.c
@@ -220,10 +220,126 @@ static inline u32 omap_usec_to_32k(u32 usec)
return DIV_ROUND_UP_ULL(32768ULL * (u64)usec, 1000000ULL);
}
-/* Set oscillator setup time for omap3 */
-static void omap3_set_clksetup(u32 usec, struct voltagedomain *voltdm)
+struct omap3_vc_timings {
+ u32 voltsetup1;
+ u32 voltsetup2;
+};
+
+struct omap3_vc {
+ struct voltagedomain *vd;
+ u32 voltctrl;
+ u32 voltsetup1;
+ u32 voltsetup2;
+ struct omap3_vc_timings timings[2];
+};
+static struct omap3_vc vc;
+
+void omap3_vc_set_pmic_signaling(int core_next_state)
+{
+ struct voltagedomain *vd = vc.vd;
+ struct omap3_vc_timings *c = vc.timings;
+ u32 voltctrl, voltsetup1, voltsetup2;
+
+ voltctrl = vc.voltctrl;
+ voltsetup1 = vc.voltsetup1;
+ voltsetup2 = vc.voltsetup2;
+
+ switch (core_next_state) {
+ case PWRDM_POWER_OFF:
+ voltctrl &= ~(OMAP3430_PRM_VOLTCTRL_AUTO_RET |
+ OMAP3430_PRM_VOLTCTRL_AUTO_SLEEP);
+ voltctrl |= OMAP3430_PRM_VOLTCTRL_AUTO_OFF;
+ if (voltctrl & OMAP3430_PRM_VOLTCTRL_SEL_OFF)
+ voltsetup2 = c->voltsetup2;
+ else
+ voltsetup1 = c->voltsetup1;
+ break;
+ case PWRDM_POWER_RET:
+ default:
+ c++;
+ voltctrl &= ~(OMAP3430_PRM_VOLTCTRL_AUTO_OFF |
+ OMAP3430_PRM_VOLTCTRL_AUTO_SLEEP);
+ voltctrl |= OMAP3430_PRM_VOLTCTRL_AUTO_RET;
+ voltsetup1 = c->voltsetup1;
+ break;
+ }
+
+ if (voltctrl != vc.voltctrl) {
+ vd->write(voltctrl, OMAP3_PRM_VOLTCTRL_OFFSET);
+ vc.voltctrl = voltctrl;
+ }
+ if (voltsetup1 != vc.voltsetup1) {
+ vd->write(c->voltsetup1,
+ OMAP3_PRM_VOLTSETUP1_OFFSET);
+ vc.voltsetup1 = voltsetup1;
+ }
+ if (voltsetup2 != vc.voltsetup2) {
+ vd->write(c->voltsetup2,
+ OMAP3_PRM_VOLTSETUP2_OFFSET);
+ vc.voltsetup2 = voltsetup2;
+ }
+}
+
+#define PRM_POLCTRL_TWL_MASK (OMAP3430_PRM_POLCTRL_CLKREQ_POL | \
+ OMAP3430_PRM_POLCTRL_CLKREQ_POL)
+#define PRM_POLCTRL_TWL_VAL OMAP3430_PRM_POLCTRL_CLKREQ_POL
+
+/*
+ * Configure signal polarity for sys_clkreq and sys_off_mode pins
+ * as the default values are wrong and can cause the system to hang
+ * if any twl4030 scripts are loaded.
+ */
+static void __init omap3_vc_init_pmic_signaling(struct voltagedomain *voltdm)
+{
+ u32 val;
+
+ if (vc.vd)
+ return;
+
+ vc.vd = voltdm;
+
+ val = voltdm->read(OMAP3_PRM_POLCTRL_OFFSET);
+ if (!(val & OMAP3430_PRM_POLCTRL_CLKREQ_POL) ||
+ (val & OMAP3430_PRM_POLCTRL_CLKREQ_POL)) {
+ val |= OMAP3430_PRM_POLCTRL_CLKREQ_POL;
+ val &= ~OMAP3430_PRM_POLCTRL_OFFMODE_POL;
+ pr_debug("PM: fixing sys_clkreq and sys_off_mode polarity to 0x%x\n",
+ val);
+ voltdm->write(val, OMAP3_PRM_POLCTRL_OFFSET);
+ }
+
+ /*
+ * By default let's use I2C4 signaling for retention idle
+ * and sys_off_mode pin signaling for off idle. This way we
+ * have sys_clk_req pin go down for retention and both
+ * sys_clk_req and sys_off_mode pins will go down for off
+ * idle. And we can also scale voltages to zero for off-idle.
+ * Note that no actual voltage scaling during off-idle will
+ * happen unless the board specific twl4030 PMIC scripts are
+ * loaded.
+ */
+ val = voltdm->read(OMAP3_PRM_VOLTCTRL_OFFSET);
+ if (!(val & OMAP3430_PRM_VOLTCTRL_SEL_OFF)) {
+ val |= OMAP3430_PRM_VOLTCTRL_SEL_OFF;
+ pr_debug("PM: setting voltctrl sys_off_mode signaling to 0x%x\n",
+ val);
+ voltdm->write(val, OMAP3_PRM_VOLTCTRL_OFFSET);
+ }
+ vc.voltctrl = val;
+
+ omap3_vc_set_pmic_signaling(PWRDM_POWER_ON);
+}
+
+static void omap3_init_voltsetup1(struct voltagedomain *voltdm,
+ struct omap3_vc_timings *c, u32 idle)
{
- voltdm->write(omap_usec_to_32k(usec), OMAP3_PRM_CLKSETUP_OFFSET);
+ unsigned long val;
+
+ val = (voltdm->vc_param->on - idle) / voltdm->pmic->slew_rate;
+ val *= voltdm->sys_clk.rate / 8 / 1000000 + 1;
+ val <<= __ffs(voltdm->vfsm->voltsetup_mask);
+ c->voltsetup1 &= ~voltdm->vfsm->voltsetup_mask;
+ c->voltsetup1 |= val;
}
/**
@@ -236,37 +352,21 @@ static void omap3_set_clksetup(u32 usec, struct voltagedomain *voltdm)
* or retention. Off mode has additionally an option to use sys_off_mode
* pad, which uses a global signal to program the whole power IC to
* off-mode.
+ *
+ * Note that pmic is not controlling the voltage scaling during
+ * retention signaled over I2C4, so we can keep voltsetup2 as 0.
+ * And the oscillator is not shut off over I2C4, so no need to
+ * set clksetup.
*/
-static void omap3_set_i2c_timings(struct voltagedomain *voltdm, bool off_mode)
+static void omap3_set_i2c_timings(struct voltagedomain *voltdm)
{
- unsigned long voltsetup1;
- u32 tgt_volt;
-
- /*
- * Oscillator is shut down only if we are using sys_off_mode pad,
- * thus we set a minimal setup time here
- */
- omap3_set_clksetup(1, voltdm);
+ struct omap3_vc_timings *c = vc.timings;
- if (off_mode)
- tgt_volt = voltdm->vc_param->off;
- else
- tgt_volt = voltdm->vc_param->ret;
-
- voltsetup1 = (voltdm->vc_param->on - tgt_volt) /
- voltdm->pmic->slew_rate;
-
- voltsetup1 = voltsetup1 * voltdm->sys_clk.rate / 8 / 1000000 + 1;
-
- voltdm->rmw(voltdm->vfsm->voltsetup_mask,
- voltsetup1 << __ffs(voltdm->vfsm->voltsetup_mask),
- voltdm->vfsm->voltsetup_reg);
-
- /*
- * pmic is not controlling the voltage scaling during retention,
- * thus set voltsetup2 to 0
- */
- voltdm->write(0, OMAP3_PRM_VOLTSETUP2_OFFSET);
+ /* Configure PRWDM_POWER_OFF over I2C4 */
+ omap3_init_voltsetup1(voltdm, c, voltdm->vc_param->off);
+ c++;
+ /* Configure PRWDM_POWER_RET over I2C4 */
+ omap3_init_voltsetup1(voltdm, c, voltdm->vc_param->ret);
}
/**
@@ -275,69 +375,49 @@ static void omap3_set_i2c_timings(struct voltagedomain *voltdm, bool off_mode)
*
* Calculates and sets up off-mode timings for a channel. Off-mode
* can use either I2C based voltage scaling, or alternatively
- * sys_off_mode pad can be used to send a global command to power IC.
- * This function first checks which mode is being used, and calls
- * omap3_set_i2c_timings() if the system is using I2C control mode.
+ * sys_off_mode pad can be used to send a global command to power IC.n,
* sys_off_mode has the additional benefit that voltages can be
* scaled to zero volt level with TWL4030 / TWL5030, I2C can only
* scale to 600mV.
+ *
+ * Note that omap is not controlling the voltage scaling during
+ * off idle signaled by sys_off_mode, so we can keep voltsetup1
+ * as 0.
*/
static void omap3_set_off_timings(struct voltagedomain *voltdm)
{
- unsigned long clksetup;
- unsigned long voltsetup2;
- unsigned long voltsetup2_old;
- u32 val;
- u32 tstart, tshut;
+ struct omap3_vc_timings *c = vc.timings;
+ u32 tstart, tshut, clksetup, voltoffset;
- /* check if sys_off_mode is used to control off-mode voltages */
- val = voltdm->read(OMAP3_PRM_VOLTCTRL_OFFSET);
- if (!(val & OMAP3430_SEL_OFF_MASK)) {
- /* No, omap is controlling them over I2C */
- omap3_set_i2c_timings(voltdm, true);
+ if (c->voltsetup2)
return;
- }
omap_pm_get_oscillator(&tstart, &tshut);
- omap3_set_clksetup(tstart, voltdm);
-
- clksetup = voltdm->read(OMAP3_PRM_CLKSETUP_OFFSET);
-
- /* voltsetup 2 in us */
- voltsetup2 = voltdm->vc_param->on / voltdm->pmic->slew_rate;
-
- /* convert to 32k clk cycles */
- voltsetup2 = DIV_ROUND_UP(voltsetup2 * 32768, 1000000);
-
- voltsetup2_old = voltdm->read(OMAP3_PRM_VOLTSETUP2_OFFSET);
-
- /*
- * Update voltsetup2 if higher than current value (needed because
- * we have multiple channels with different ramp times), also
- * update voltoffset always to value recommended by TRM
- */
- if (voltsetup2 > voltsetup2_old) {
- voltdm->write(voltsetup2, OMAP3_PRM_VOLTSETUP2_OFFSET);
- voltdm->write(clksetup - voltsetup2,
- OMAP3_PRM_VOLTOFFSET_OFFSET);
- } else
- voltdm->write(clksetup - voltsetup2_old,
- OMAP3_PRM_VOLTOFFSET_OFFSET);
+ if (tstart == ULONG_MAX) {
+ pr_debug("PM: oscillator start-up time not initialized, using 10ms\n");
+ clksetup = omap_usec_to_32k(10000);
+ } else {
+ clksetup = omap_usec_to_32k(tstart);
+ }
/*
- * omap is not controlling voltage scaling during off-mode,
- * thus set voltsetup1 to 0
+ * For twl4030 errata 27, we need to allow minimum ~488.32 us wait to
+ * switch from HFCLKIN to internal oscillator. That means timings
+ * have voltoffset fixed to 0xa in rounded up 32 KiHz cycles. And
+ * that means we can calculate the value based on the oscillator
+ * start-up time since voltoffset2 = clksetup - voltoffset.
*/
- voltdm->rmw(voltdm->vfsm->voltsetup_mask, 0,
- voltdm->vfsm->voltsetup_reg);
-
- /* voltoffset must be clksetup minus voltsetup2 according to TRM */
- voltdm->write(clksetup - voltsetup2, OMAP3_PRM_VOLTOFFSET_OFFSET);
+ voltoffset = omap_usec_to_32k(488);
+ c->voltsetup2 = clksetup - voltoffset;
+ voltdm->write(clksetup, OMAP3_PRM_CLKSETUP_OFFSET);
+ voltdm->write(voltoffset, OMAP3_PRM_VOLTOFFSET_OFFSET);
}
static void __init omap3_vc_init_channel(struct voltagedomain *voltdm)
{
+ omap3_vc_init_pmic_signaling(voltdm);
omap3_set_off_timings(voltdm);
+ omap3_set_i2c_timings(voltdm);
}
/**
diff --git a/arch/arm/mach-omap2/vc.h b/arch/arm/mach-omap2/vc.h
index 91c8d75bf2ea..cdbdd78e755e 100644
--- a/arch/arm/mach-omap2/vc.h
+++ b/arch/arm/mach-omap2/vc.h
@@ -117,6 +117,9 @@ extern struct omap_vc_param omap4_mpu_vc_data;
extern struct omap_vc_param omap4_iva_vc_data;
extern struct omap_vc_param omap4_core_vc_data;
+void omap3_vc_set_pmic_signaling(int core_next_state);
+
+
void omap_vc_init_channel(struct voltagedomain *voltdm);
int omap_vc_pre_scale(struct voltagedomain *voltdm,
unsigned long target_volt,
diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig
index 14f2cae4109c..2412efb6cdd9 100644
--- a/arch/arm/mach-orion5x/Kconfig
+++ b/arch/arm/mach-orion5x/Kconfig
@@ -5,6 +5,11 @@ menu "Orion Implementations"
config ARCH_ORION5X_DT
bool "Marvell Orion5x Flattened Device Tree"
select USE_OF
+ select ORION_CLK
+ select ORION_IRQCHIP
+ select ORION_TIMER
+ select PINCTRL
+ select PINCTRL_ORION
help
Say 'Y' here if you want your kernel to support the
Marvell Orion5x using flattened device tree.
@@ -23,6 +28,14 @@ config MACH_RD88F5182
Say 'Y' here if you want your kernel to support the
Marvell Orion-NAS (88F5182) RD2
+config MACH_RD88F5182_DT
+ bool "Marvell Orion-NAS Reference Design (Flattened Device Tree)"
+ select ARCH_ORION5X_DT
+ select I2C_BOARDINFO
+ help
+ Say 'Y' here if you want your kernel to support the Marvell
+ Orion-NAS (88F5182) RD2, Flattened Device Tree.
+
config MACH_KUROBOX_PRO
bool "KuroBox Pro"
select I2C_BOARDINFO
@@ -102,28 +115,13 @@ config MACH_MV2120
Say 'Y' here if you want your kernel to support the
HP Media Vault mv2120 or mv5100.
-config MACH_EDMINI_V2_DT
- bool "LaCie Ethernet Disk mini V2 (Flattened Device Tree)"
- select I2C_BOARDINFO
+config MACH_D2NET_DT
+ bool "LaCie d2 Network / Big Disk Network (Flattened Device Tree)"
select ARCH_ORION5X_DT
help
Say 'Y' here if you want your kernel to support the
- LaCie Ethernet Disk mini V2 (Flattened Device Tree).
-
-config MACH_D2NET
- bool "LaCie d2 Network"
- select I2C_BOARDINFO
- help
- Say 'Y' here if you want your kernel to support the
LaCie d2 Network NAS.
-config MACH_BIGDISK
- bool "LaCie Big Disk Network"
- select I2C_BOARDINFO
- help
- Say 'Y' here if you want your kernel to support the
- LaCie Big Disk Network NAS.
-
config MACH_NET2BIG
bool "LaCie 2Big Network"
select I2C_BOARDINFO
@@ -131,8 +129,9 @@ config MACH_NET2BIG
Say 'Y' here if you want your kernel to support the
LaCie 2Big Network NAS.
-config MACH_MSS2
- bool "Maxtor Shared Storage II"
+config MACH_MSS2_DT
+ bool "Maxtor Shared Storage II (Flattened Device Tree)"
+ select ARCH_ORION5X_DT
help
Say 'Y' here if you want your kernel to support the
Maxtor Shared Storage II platform.
diff --git a/arch/arm/mach-orion5x/Makefile b/arch/arm/mach-orion5x/Makefile
index 45da805fb236..a40b5c9a58c4 100644
--- a/arch/arm/mach-orion5x/Makefile
+++ b/arch/arm/mach-orion5x/Makefile
@@ -12,10 +12,7 @@ obj-$(CONFIG_MACH_TS409) += ts409-setup.o tsx09-common.o
obj-$(CONFIG_MACH_WRT350N_V2) += wrt350n-v2-setup.o
obj-$(CONFIG_MACH_TS78XX) += ts78xx-setup.o
obj-$(CONFIG_MACH_MV2120) += mv2120-setup.o
-obj-$(CONFIG_MACH_D2NET) += d2net-setup.o
-obj-$(CONFIG_MACH_BIGDISK) += d2net-setup.o
obj-$(CONFIG_MACH_NET2BIG) += net2big-setup.o
-obj-$(CONFIG_MACH_MSS2) += mss2-setup.o
obj-$(CONFIG_MACH_WNR854T) += wnr854t-setup.o
obj-$(CONFIG_MACH_RD88F5181L_GE) += rd88f5181l-ge-setup.o
obj-$(CONFIG_MACH_RD88F5181L_FXO) += rd88f5181l-fxo-setup.o
@@ -23,4 +20,6 @@ obj-$(CONFIG_MACH_RD88F6183AP_GE) += rd88f6183ap-ge-setup.o
obj-$(CONFIG_MACH_LINKSTATION_LSCHL) += ls-chl-setup.o
obj-$(CONFIG_ARCH_ORION5X_DT) += board-dt.o
-obj-$(CONFIG_MACH_EDMINI_V2_DT) += edmini_v2-setup.o
+obj-$(CONFIG_MACH_D2NET_DT) += board-d2net.o
+obj-$(CONFIG_MACH_MSS2_DT) += board-mss2.o
+obj-$(CONFIG_MACH_RD88F5182_DT) += board-rd88f5182.o
diff --git a/arch/arm/mach-orion5x/board-d2net.c b/arch/arm/mach-orion5x/board-d2net.c
new file mode 100644
index 000000000000..8a7284124153
--- /dev/null
+++ b/arch/arm/mach-orion5x/board-d2net.c
@@ -0,0 +1,109 @@
+/*
+ * arch/arm/mach-orion5x/board-d2net.c
+ *
+ * LaCie d2Network and Big Disk Network NAS setup
+ *
+ * Copyright (C) 2009 Simon Guinot <sguinot@lacie.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <linux/leds.h>
+#include <linux/gpio.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/pci.h>
+#include <mach/orion5x.h>
+#include <plat/orion-gpio.h>
+#include "common.h"
+
+/*****************************************************************************
+ * LaCie d2 Network Info
+ ****************************************************************************/
+
+/*****************************************************************************
+ * GPIO LED's
+ ****************************************************************************/
+
+/*
+ * The blue front LED is wired to the CPLD and can blink in relation with the
+ * SATA activity.
+ *
+ * The following array detail the different LED registers and the combination
+ * of their possible values:
+ *
+ * led_off | blink_ctrl | SATA active | LED state
+ * | | |
+ * 1 | x | x | off
+ * 0 | 0 | 0 | off
+ * 0 | 1 | 0 | blink (rate 300ms)
+ * 0 | x | 1 | on
+ *
+ * Notes: The blue and the red front LED's can't be on at the same time.
+ * Red LED have priority.
+ */
+
+#define D2NET_GPIO_RED_LED 6
+#define D2NET_GPIO_BLUE_LED_BLINK_CTRL 16
+#define D2NET_GPIO_BLUE_LED_OFF 23
+
+static struct gpio_led d2net_leds[] = {
+ {
+ .name = "d2net:blue:sata",
+ .default_trigger = "default-on",
+ .gpio = D2NET_GPIO_BLUE_LED_OFF,
+ .active_low = 1,
+ },
+ {
+ .name = "d2net:red:fail",
+ .gpio = D2NET_GPIO_RED_LED,
+ },
+};
+
+static struct gpio_led_platform_data d2net_led_data = {
+ .num_leds = ARRAY_SIZE(d2net_leds),
+ .leds = d2net_leds,
+};
+
+static struct platform_device d2net_gpio_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &d2net_led_data,
+ },
+};
+
+static void __init d2net_gpio_leds_init(void)
+{
+ int err;
+
+ /* Configure register blink_ctrl to allow SATA activity LED blinking. */
+ err = gpio_request(D2NET_GPIO_BLUE_LED_BLINK_CTRL, "blue LED blink");
+ if (err == 0) {
+ err = gpio_direction_output(D2NET_GPIO_BLUE_LED_BLINK_CTRL, 1);
+ if (err)
+ gpio_free(D2NET_GPIO_BLUE_LED_BLINK_CTRL);
+ }
+ if (err)
+ pr_err("d2net: failed to configure blue LED blink GPIO\n");
+
+ platform_device_register(&d2net_gpio_leds);
+}
+
+/*****************************************************************************
+ * General Setup
+ ****************************************************************************/
+
+void __init d2net_init(void)
+{
+ d2net_gpio_leds_init();
+
+ pr_notice("d2net: Flash write are not yet supported.\n");
+}
diff --git a/arch/arm/mach-orion5x/board-dt.c b/arch/arm/mach-orion5x/board-dt.c
index c134a826070a..35d418faf8f1 100644
--- a/arch/arm/mach-orion5x/board-dt.c
+++ b/arch/arm/mach-orion5x/board-dt.c
@@ -15,10 +15,16 @@
#include <linux/of.h>
#include <linux/of_platform.h>
#include <linux/cpu.h>
+#include <linux/mbus.h>
+#include <linux/clk-provider.h>
+#include <linux/clocksource.h>
#include <asm/system_misc.h>
#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
#include <mach/orion5x.h>
+#include <mach/bridge-regs.h>
#include <plat/irq.h>
+#include <plat/time.h>
#include "common.h"
static struct of_dev_auxdata orion5x_auxdata_lookup[] __initdata = {
@@ -39,14 +45,13 @@ static void __init orion5x_dt_init(void)
orion5x_id(&dev, &rev, &dev_name);
printk(KERN_INFO "Orion ID: %s. TCLK=%d.\n", dev_name, orion5x_tclk);
+ BUG_ON(mvebu_mbus_dt_init());
+
/*
* Setup Orion address map
*/
orion5x_setup_wins();
- /* Setup root of clk tree */
- clk_init();
-
/*
* Don't issue "Wait for Interrupt" instruction if we are
* running on D0 5281 silicon.
@@ -56,8 +61,8 @@ static void __init orion5x_dt_init(void)
cpu_idle_poll_ctrl(true);
}
- if (of_machine_is_compatible("lacie,ethernet-disk-mini-v2"))
- edmini_v2_init();
+ if (of_machine_is_compatible("maxtor,shared-storage-2"))
+ mss2_init();
of_platform_populate(NULL, of_default_bus_match_table,
orion5x_auxdata_lookup, NULL);
@@ -71,9 +76,6 @@ static const char *orion5x_dt_compat[] = {
DT_MACHINE_START(ORION5X_DT, "Marvell Orion5x (Flattened Device Tree)")
/* Maintainer: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> */
.map_io = orion5x_map_io,
- .init_early = orion5x_init_early,
- .init_irq = orion_dt_init_irq,
- .init_time = orion5x_timer_init,
.init_machine = orion5x_dt_init,
.restart = orion5x_restart,
.dt_compat = orion5x_dt_compat,
diff --git a/arch/arm/mach-orion5x/board-mss2.c b/arch/arm/mach-orion5x/board-mss2.c
new file mode 100644
index 000000000000..66f9c3ba86cc
--- /dev/null
+++ b/arch/arm/mach-orion5x/board-mss2.c
@@ -0,0 +1,90 @@
+/*
+ * Maxtor Shared Storage II Board Setup
+ *
+ * Maintainer: Sylver Bruneau <sylver.bruneau@googlemail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/pci.h>
+#include <mach/orion5x.h>
+#include <mach/bridge-regs.h>
+#include "common.h"
+
+/*****************************************************************************
+ * Maxtor Shared Storage II Info
+ ****************************************************************************/
+
+/****************************************************************************
+ * PCI setup
+ ****************************************************************************/
+static int __init mss2_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+ int irq;
+
+ /*
+ * Check for devices with hard-wired IRQs.
+ */
+ irq = orion5x_pci_map_irq(dev, slot, pin);
+ if (irq != -1)
+ return irq;
+
+ return -1;
+}
+
+static struct hw_pci mss2_pci __initdata = {
+ .nr_controllers = 2,
+ .setup = orion5x_pci_sys_setup,
+ .scan = orion5x_pci_sys_scan_bus,
+ .map_irq = mss2_pci_map_irq,
+};
+
+static int __init mss2_pci_init(void)
+{
+ if (machine_is_mss2())
+ pci_common_init(&mss2_pci);
+
+ return 0;
+}
+subsys_initcall(mss2_pci_init);
+
+/*****************************************************************************
+ * MSS2 power off method
+ ****************************************************************************/
+/*
+ * On the Maxtor Shared Storage II, the shutdown process is the following :
+ * - Userland modifies U-boot env to tell U-boot to go idle at next boot
+ * - The board reboots
+ * - U-boot starts and go into an idle mode until the user press "power"
+ */
+static void mss2_power_off(void)
+{
+ u32 reg;
+
+ /*
+ * Enable and issue soft reset
+ */
+ reg = readl(RSTOUTn_MASK);
+ reg |= 1 << 2;
+ writel(reg, RSTOUTn_MASK);
+
+ reg = readl(CPU_SOFT_RESET);
+ reg |= 1;
+ writel(reg, CPU_SOFT_RESET);
+}
+
+void __init mss2_init(void)
+{
+ /* register mss2 specific power-off method */
+ pm_power_off = mss2_power_off;
+}
diff --git a/arch/arm/mach-orion5x/board-rd88f5182.c b/arch/arm/mach-orion5x/board-rd88f5182.c
new file mode 100644
index 000000000000..270824b0e50f
--- /dev/null
+++ b/arch/arm/mach-orion5x/board-rd88f5182.c
@@ -0,0 +1,116 @@
+/*
+ * arch/arm/mach-orion5x/rd88f5182-setup.c
+ *
+ * Marvell Orion-NAS Reference Design Setup
+ *
+ * Maintainer: Ronen Shitrit <rshitrit@marvell.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <linux/gpio.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/pci.h>
+#include <mach/orion5x.h>
+#include "common.h"
+
+/*****************************************************************************
+ * RD-88F5182 Info
+ ****************************************************************************/
+
+/*
+ * PCI
+ */
+
+#define RD88F5182_PCI_SLOT0_OFFS 7
+#define RD88F5182_PCI_SLOT0_IRQ_A_PIN 7
+#define RD88F5182_PCI_SLOT0_IRQ_B_PIN 6
+
+/*****************************************************************************
+ * PCI
+ ****************************************************************************/
+
+static void __init rd88f5182_pci_preinit(void)
+{
+ int pin;
+
+ /*
+ * Configure PCI GPIO IRQ pins
+ */
+ pin = RD88F5182_PCI_SLOT0_IRQ_A_PIN;
+ if (gpio_request(pin, "PCI IntA") == 0) {
+ if (gpio_direction_input(pin) == 0) {
+ irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
+ } else {
+ printk(KERN_ERR "rd88f5182_pci_preinit failed to "
+ "set_irq_type pin %d\n", pin);
+ gpio_free(pin);
+ }
+ } else {
+ printk(KERN_ERR "rd88f5182_pci_preinit failed to request gpio %d\n", pin);
+ }
+
+ pin = RD88F5182_PCI_SLOT0_IRQ_B_PIN;
+ if (gpio_request(pin, "PCI IntB") == 0) {
+ if (gpio_direction_input(pin) == 0) {
+ irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
+ } else {
+ printk(KERN_ERR "rd88f5182_pci_preinit failed to "
+ "set_irq_type pin %d\n", pin);
+ gpio_free(pin);
+ }
+ } else {
+ printk(KERN_ERR "rd88f5182_pci_preinit failed to gpio_request %d\n", pin);
+ }
+}
+
+static int __init rd88f5182_pci_map_irq(const struct pci_dev *dev, u8 slot,
+ u8 pin)
+{
+ int irq;
+
+ /*
+ * Check for devices with hard-wired IRQs.
+ */
+ irq = orion5x_pci_map_irq(dev, slot, pin);
+ if (irq != -1)
+ return irq;
+
+ /*
+ * PCI IRQs are connected via GPIOs
+ */
+ switch (slot - RD88F5182_PCI_SLOT0_OFFS) {
+ case 0:
+ if (pin == 1)
+ return gpio_to_irq(RD88F5182_PCI_SLOT0_IRQ_A_PIN);
+ else
+ return gpio_to_irq(RD88F5182_PCI_SLOT0_IRQ_B_PIN);
+ default:
+ return -1;
+ }
+}
+
+static struct hw_pci rd88f5182_pci __initdata = {
+ .nr_controllers = 2,
+ .preinit = rd88f5182_pci_preinit,
+ .setup = orion5x_pci_sys_setup,
+ .scan = orion5x_pci_sys_scan_bus,
+ .map_irq = rd88f5182_pci_map_irq,
+};
+
+static int __init rd88f5182_pci_init(void)
+{
+ if (of_machine_is_compatible("marvell,rd-88f5182-nas"))
+ pci_common_init(&rd88f5182_pci);
+
+ return 0;
+}
+
+subsys_initcall(rd88f5182_pci_init);
diff --git a/arch/arm/mach-orion5x/common.h b/arch/arm/mach-orion5x/common.h
index 7548db2bfb8a..26d6f34b6027 100644
--- a/arch/arm/mach-orion5x/common.h
+++ b/arch/arm/mach-orion5x/common.h
@@ -64,17 +64,16 @@ int orion5x_pci_sys_setup(int nr, struct pci_sys_data *sys);
struct pci_bus *orion5x_pci_sys_scan_bus(int nr, struct pci_sys_data *sys);
int orion5x_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin);
-/* board init functions for boards not fully converted to fdt */
-#ifdef CONFIG_MACH_EDMINI_V2_DT
-void edmini_v2_init(void);
-#else
-static inline void edmini_v2_init(void) {};
-#endif
-
struct meminfo;
struct tag;
extern void __init tag_fixup_mem32(struct tag *, char **, struct meminfo *);
+#ifdef CONFIG_MACH_MSS2_DT
+extern void mss2_init(void);
+#else
+static inline void mss2_init(void) {}
+#endif
+
/*****************************************************************************
* Helpers to access Orion registers
****************************************************************************/
diff --git a/arch/arm/mach-orion5x/d2net-setup.c b/arch/arm/mach-orion5x/d2net-setup.c
deleted file mode 100644
index 8f68b745c1d5..000000000000
--- a/arch/arm/mach-orion5x/d2net-setup.c
+++ /dev/null
@@ -1,365 +0,0 @@
-/*
- * arch/arm/mach-orion5x/d2net-setup.c
- *
- * LaCie d2Network and Big Disk Network NAS setup
- *
- * Copyright (C) 2009 Simon Guinot <sguinot@lacie.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/pci.h>
-#include <linux/irq.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/leds.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/i2c.h>
-#include <linux/ata_platform.h>
-#include <linux/gpio.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/pci.h>
-#include <mach/orion5x.h>
-#include <plat/orion-gpio.h>
-#include "common.h"
-#include "mpp.h"
-
-/*****************************************************************************
- * LaCie d2 Network Info
- ****************************************************************************/
-
-/*
- * 512KB NOR flash Device bus boot chip select
- */
-
-#define D2NET_NOR_BOOT_BASE 0xfff80000
-#define D2NET_NOR_BOOT_SIZE SZ_512K
-
-/*****************************************************************************
- * 512KB NOR Flash on Boot Device
- ****************************************************************************/
-
-/*
- * TODO: Check write support on flash MX29LV400CBTC-70G
- */
-
-static struct mtd_partition d2net_partitions[] = {
- {
- .name = "Full512kb",
- .size = MTDPART_SIZ_FULL,
- .offset = 0,
- .mask_flags = MTD_WRITEABLE,
- },
-};
-
-static struct physmap_flash_data d2net_nor_flash_data = {
- .width = 1,
- .parts = d2net_partitions,
- .nr_parts = ARRAY_SIZE(d2net_partitions),
-};
-
-static struct resource d2net_nor_flash_resource = {
- .flags = IORESOURCE_MEM,
- .start = D2NET_NOR_BOOT_BASE,
- .end = D2NET_NOR_BOOT_BASE
- + D2NET_NOR_BOOT_SIZE - 1,
-};
-
-static struct platform_device d2net_nor_flash = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &d2net_nor_flash_data,
- },
- .num_resources = 1,
- .resource = &d2net_nor_flash_resource,
-};
-
-/*****************************************************************************
- * Ethernet
- ****************************************************************************/
-
-static struct mv643xx_eth_platform_data d2net_eth_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(8),
-};
-
-/*****************************************************************************
- * I2C devices
- ****************************************************************************/
-
-/*
- * i2c addr | chip | description
- * 0x32 | Ricoh 5C372b | RTC
- * 0x3e | GMT G762 | PWM fan controller
- * 0x50 | HT24LC08 | eeprom (1kB)
- *
- * TODO: Add G762 support to the g760a driver.
- */
-static struct i2c_board_info __initdata d2net_i2c_devices[] = {
- {
- I2C_BOARD_INFO("rs5c372b", 0x32),
- }, {
- I2C_BOARD_INFO("24c08", 0x50),
- },
-};
-
-/*****************************************************************************
- * SATA
- ****************************************************************************/
-
-static struct mv_sata_platform_data d2net_sata_data = {
- .n_ports = 2,
-};
-
-#define D2NET_GPIO_SATA0_POWER 3
-#define D2NET_GPIO_SATA1_POWER 12
-
-static void __init d2net_sata_power_init(void)
-{
- int err;
-
- err = gpio_request(D2NET_GPIO_SATA0_POWER, "SATA0 power");
- if (err == 0) {
- err = gpio_direction_output(D2NET_GPIO_SATA0_POWER, 1);
- if (err)
- gpio_free(D2NET_GPIO_SATA0_POWER);
- }
- if (err)
- pr_err("d2net: failed to configure SATA0 power GPIO\n");
-
- err = gpio_request(D2NET_GPIO_SATA1_POWER, "SATA1 power");
- if (err == 0) {
- err = gpio_direction_output(D2NET_GPIO_SATA1_POWER, 1);
- if (err)
- gpio_free(D2NET_GPIO_SATA1_POWER);
- }
- if (err)
- pr_err("d2net: failed to configure SATA1 power GPIO\n");
-}
-
-/*****************************************************************************
- * GPIO LED's
- ****************************************************************************/
-
-/*
- * The blue front LED is wired to the CPLD and can blink in relation with the
- * SATA activity.
- *
- * The following array detail the different LED registers and the combination
- * of their possible values:
- *
- * led_off | blink_ctrl | SATA active | LED state
- * | | |
- * 1 | x | x | off
- * 0 | 0 | 0 | off
- * 0 | 1 | 0 | blink (rate 300ms)
- * 0 | x | 1 | on
- *
- * Notes: The blue and the red front LED's can't be on at the same time.
- * Red LED have priority.
- */
-
-#define D2NET_GPIO_RED_LED 6
-#define D2NET_GPIO_BLUE_LED_BLINK_CTRL 16
-#define D2NET_GPIO_BLUE_LED_OFF 23
-
-static struct gpio_led d2net_leds[] = {
- {
- .name = "d2net:blue:sata",
- .default_trigger = "default-on",
- .gpio = D2NET_GPIO_BLUE_LED_OFF,
- .active_low = 1,
- },
- {
- .name = "d2net:red:fail",
- .gpio = D2NET_GPIO_RED_LED,
- },
-};
-
-static struct gpio_led_platform_data d2net_led_data = {
- .num_leds = ARRAY_SIZE(d2net_leds),
- .leds = d2net_leds,
-};
-
-static struct platform_device d2net_gpio_leds = {
- .name = "leds-gpio",
- .id = -1,
- .dev = {
- .platform_data = &d2net_led_data,
- },
-};
-
-static void __init d2net_gpio_leds_init(void)
-{
- int err;
-
- /* Configure GPIO over MPP max number. */
- orion_gpio_set_valid(D2NET_GPIO_BLUE_LED_OFF, 1);
-
- /* Configure register blink_ctrl to allow SATA activity LED blinking. */
- err = gpio_request(D2NET_GPIO_BLUE_LED_BLINK_CTRL, "blue LED blink");
- if (err == 0) {
- err = gpio_direction_output(D2NET_GPIO_BLUE_LED_BLINK_CTRL, 1);
- if (err)
- gpio_free(D2NET_GPIO_BLUE_LED_BLINK_CTRL);
- }
- if (err)
- pr_err("d2net: failed to configure blue LED blink GPIO\n");
-
- platform_device_register(&d2net_gpio_leds);
-}
-
-/****************************************************************************
- * GPIO keys
- ****************************************************************************/
-
-#define D2NET_GPIO_PUSH_BUTTON 18
-#define D2NET_GPIO_POWER_SWITCH_ON 8
-#define D2NET_GPIO_POWER_SWITCH_OFF 9
-
-#define D2NET_SWITCH_POWER_ON 0x1
-#define D2NET_SWITCH_POWER_OFF 0x2
-
-static struct gpio_keys_button d2net_buttons[] = {
- {
- .type = EV_SW,
- .code = D2NET_SWITCH_POWER_OFF,
- .gpio = D2NET_GPIO_POWER_SWITCH_OFF,
- .desc = "Power rocker switch (auto|off)",
- .active_low = 0,
- },
- {
- .type = EV_SW,
- .code = D2NET_SWITCH_POWER_ON,
- .gpio = D2NET_GPIO_POWER_SWITCH_ON,
- .desc = "Power rocker switch (on|auto)",
- .active_low = 0,
- },
- {
- .type = EV_KEY,
- .code = KEY_POWER,
- .gpio = D2NET_GPIO_PUSH_BUTTON,
- .desc = "Front Push Button",
- .active_low = 0,
- },
-};
-
-static struct gpio_keys_platform_data d2net_button_data = {
- .buttons = d2net_buttons,
- .nbuttons = ARRAY_SIZE(d2net_buttons),
-};
-
-static struct platform_device d2net_gpio_buttons = {
- .name = "gpio-keys",
- .id = -1,
- .dev = {
- .platform_data = &d2net_button_data,
- },
-};
-
-/*****************************************************************************
- * General Setup
- ****************************************************************************/
-
-static unsigned int d2net_mpp_modes[] __initdata = {
- MPP0_GPIO, /* Board ID (bit 0) */
- MPP1_GPIO, /* Board ID (bit 1) */
- MPP2_GPIO, /* Board ID (bit 2) */
- MPP3_GPIO, /* SATA 0 power */
- MPP4_UNUSED,
- MPP5_GPIO, /* Fan fail detection */
- MPP6_GPIO, /* Red front LED */
- MPP7_UNUSED,
- MPP8_GPIO, /* Rear power switch (on|auto) */
- MPP9_GPIO, /* Rear power switch (auto|off) */
- MPP10_UNUSED,
- MPP11_UNUSED,
- MPP12_GPIO, /* SATA 1 power */
- MPP13_UNUSED,
- MPP14_SATA_LED, /* SATA 0 active */
- MPP15_SATA_LED, /* SATA 1 active */
- MPP16_GPIO, /* Blue front LED blink control */
- MPP17_UNUSED,
- MPP18_GPIO, /* Front button (0 = Released, 1 = Pushed ) */
- MPP19_UNUSED,
- 0,
- /* 22: USB port 1 fuse (0 = Fail, 1 = Ok) */
- /* 23: Blue front LED off */
- /* 24: Inhibit board power off (0 = Disabled, 1 = Enabled) */
-};
-
-#define D2NET_GPIO_INHIBIT_POWER_OFF 24
-
-static void __init d2net_init(void)
-{
- /*
- * Setup basic Orion functions. Need to be called early.
- */
- orion5x_init();
-
- orion5x_mpp_conf(d2net_mpp_modes);
-
- /*
- * Configure peripherals.
- */
- orion5x_ehci0_init();
- orion5x_eth_init(&d2net_eth_data);
- orion5x_i2c_init();
- orion5x_uart0_init();
-
- d2net_sata_power_init();
- orion5x_sata_init(&d2net_sata_data);
-
- mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
- ORION_MBUS_DEVBUS_BOOT_ATTR,
- D2NET_NOR_BOOT_BASE,
- D2NET_NOR_BOOT_SIZE);
- platform_device_register(&d2net_nor_flash);
-
- platform_device_register(&d2net_gpio_buttons);
-
- d2net_gpio_leds_init();
-
- pr_notice("d2net: Flash write are not yet supported.\n");
-
- i2c_register_board_info(0, d2net_i2c_devices,
- ARRAY_SIZE(d2net_i2c_devices));
-
- orion_gpio_set_valid(D2NET_GPIO_INHIBIT_POWER_OFF, 1);
-}
-
-/* Warning: LaCie use a wrong mach-type (0x20e=526) in their bootloader. */
-
-#ifdef CONFIG_MACH_D2NET
-MACHINE_START(D2NET, "LaCie d2 Network")
- .atag_offset = 0x100,
- .init_machine = d2net_init,
- .map_io = orion5x_map_io,
- .init_early = orion5x_init_early,
- .init_irq = orion5x_init_irq,
- .init_time = orion5x_timer_init,
- .fixup = tag_fixup_mem32,
- .restart = orion5x_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_BIGDISK
-MACHINE_START(BIGDISK, "LaCie Big Disk Network")
- .atag_offset = 0x100,
- .init_machine = d2net_init,
- .map_io = orion5x_map_io,
- .init_early = orion5x_init_early,
- .init_irq = orion5x_init_irq,
- .init_time = orion5x_timer_init,
- .fixup = tag_fixup_mem32,
- .restart = orion5x_restart,
-MACHINE_END
-#endif
-
diff --git a/arch/arm/mach-orion5x/edmini_v2-setup.c b/arch/arm/mach-orion5x/edmini_v2-setup.c
deleted file mode 100644
index f66c1b2ee8c1..000000000000
--- a/arch/arm/mach-orion5x/edmini_v2-setup.c
+++ /dev/null
@@ -1,169 +0,0 @@
-/*
- * arch/arm/mach-orion5x/edmini_v2-setup.c
- *
- * LaCie Ethernet Disk mini V2 Setup
- *
- * Copyright (C) 2008 Christopher Moore <moore@free.fr>
- * Copyright (C) 2008 Albert Aribaud <albert.aribaud@free.fr>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-/*
- * TODO: add Orion USB device port init when kernel.org support is added.
- * TODO: add flash write support: see below.
- * TODO: add power-off support.
- * TODO: add I2C EEPROM support.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/pci.h>
-#include <linux/irq.h>
-#include <linux/mbus.h>
-#include <linux/mtd/physmap.h>
-#include <linux/leds.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/i2c.h>
-#include <linux/ata_platform.h>
-#include <linux/gpio.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/pci.h>
-#include <mach/orion5x.h>
-#include "common.h"
-#include "mpp.h"
-
-/*****************************************************************************
- * EDMINI_V2 Info
- ****************************************************************************/
-
-/*
- * 512KB NOR flash Device bus boot chip select
- */
-
-#define EDMINI_V2_NOR_BOOT_BASE 0xfff80000
-#define EDMINI_V2_NOR_BOOT_SIZE SZ_512K
-
-/*****************************************************************************
- * 512KB NOR Flash on BOOT Device
- ****************************************************************************/
-
-/*
- * Currently the MTD code does not recognize the MX29LV400CBCT as a bottom
- * -type device. This could cause risks of accidentally erasing critical
- * flash sectors. We thus define a single, write-protected partition covering
- * the whole flash.
- * TODO: once the flash part TOP/BOTTOM detection issue is sorted out in the MTD
- * code, break this into at least three partitions: 'u-boot code', 'u-boot
- * environment' and 'whatever is left'.
- */
-
-static struct mtd_partition edmini_v2_partitions[] = {
- {
- .name = "Full512kb",
- .size = 0x00080000,
- .offset = 0x00000000,
- .mask_flags = MTD_WRITEABLE,
- },
-};
-
-static struct physmap_flash_data edmini_v2_nor_flash_data = {
- .width = 1,
- .parts = edmini_v2_partitions,
- .nr_parts = ARRAY_SIZE(edmini_v2_partitions),
-};
-
-static struct resource edmini_v2_nor_flash_resource = {
- .flags = IORESOURCE_MEM,
- .start = EDMINI_V2_NOR_BOOT_BASE,
- .end = EDMINI_V2_NOR_BOOT_BASE
- + EDMINI_V2_NOR_BOOT_SIZE - 1,
-};
-
-static struct platform_device edmini_v2_nor_flash = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &edmini_v2_nor_flash_data,
- },
- .num_resources = 1,
- .resource = &edmini_v2_nor_flash_resource,
-};
-
-/*****************************************************************************
- * RTC 5C372a on I2C bus
- ****************************************************************************/
-
-#define EDMINIV2_RTC_GPIO 3
-
-static struct i2c_board_info __initdata edmini_v2_i2c_rtc = {
- I2C_BOARD_INFO("rs5c372a", 0x32),
- .irq = 0,
-};
-
-/*****************************************************************************
- * General Setup
- ****************************************************************************/
-static unsigned int edminiv2_mpp_modes[] __initdata = {
- MPP0_UNUSED,
- MPP1_UNUSED,
- MPP2_UNUSED,
- MPP3_GPIO, /* RTC interrupt */
- MPP4_UNUSED,
- MPP5_UNUSED,
- MPP6_UNUSED,
- MPP7_UNUSED,
- MPP8_UNUSED,
- MPP9_UNUSED,
- MPP10_UNUSED,
- MPP11_UNUSED,
- MPP12_SATA_LED, /* SATA 0 presence */
- MPP13_SATA_LED, /* SATA 1 presence */
- MPP14_SATA_LED, /* SATA 0 active */
- MPP15_SATA_LED, /* SATA 1 active */
- /* 16: Power LED control (0 = On, 1 = Off) */
- MPP16_GPIO,
- /* 17: Power LED control select (0 = CPLD, 1 = GPIO16) */
- MPP17_GPIO,
- /* 18: Power button status (0 = Released, 1 = Pressed) */
- MPP18_GPIO,
- MPP19_UNUSED,
- 0,
-};
-
-void __init edmini_v2_init(void)
-{
- orion5x_mpp_conf(edminiv2_mpp_modes);
-
- /*
- * Configure peripherals.
- */
- orion5x_ehci0_init();
-
- mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
- ORION_MBUS_DEVBUS_BOOT_ATTR,
- EDMINI_V2_NOR_BOOT_BASE,
- EDMINI_V2_NOR_BOOT_SIZE);
- platform_device_register(&edmini_v2_nor_flash);
-
- pr_notice("edmini_v2: USB device port, flash write and power-off "
- "are not yet supported.\n");
-
- /* Get RTC IRQ and register the chip */
- if (gpio_request(EDMINIV2_RTC_GPIO, "rtc") == 0) {
- if (gpio_direction_input(EDMINIV2_RTC_GPIO) == 0)
- edmini_v2_i2c_rtc.irq = gpio_to_irq(EDMINIV2_RTC_GPIO);
- else
- gpio_free(EDMINIV2_RTC_GPIO);
- }
-
- if (edmini_v2_i2c_rtc.irq == 0)
- pr_warning("edmini_v2: failed to get RTC IRQ\n");
-
- i2c_register_board_info(0, &edmini_v2_i2c_rtc, 1);
-}
diff --git a/arch/arm/mach-orion5x/irq.c b/arch/arm/mach-orion5x/irq.c
index 9654b0cc5892..cd4bac4d7e43 100644
--- a/arch/arm/mach-orion5x/irq.c
+++ b/arch/arm/mach-orion5x/irq.c
@@ -16,6 +16,7 @@
#include <mach/bridge-regs.h>
#include <plat/orion-gpio.h>
#include <plat/irq.h>
+#include <asm/exception.h>
#include "common.h"
static int __initdata gpio0_irqs[4] = {
@@ -25,10 +26,37 @@ static int __initdata gpio0_irqs[4] = {
IRQ_ORION5X_GPIO_24_31,
};
+#ifdef CONFIG_MULTI_IRQ_HANDLER
+/*
+ * Compiling with both non-DT and DT support enabled, will
+ * break asm irq handler used by non-DT boards. Therefore,
+ * we provide a C-style irq handler even for non-DT boards,
+ * if MULTI_IRQ_HANDLER is set.
+ */
+
+asmlinkage void
+__exception_irq_entry orion5x_legacy_handle_irq(struct pt_regs *regs)
+{
+ u32 stat;
+
+ stat = readl_relaxed(MAIN_IRQ_CAUSE);
+ stat &= readl_relaxed(MAIN_IRQ_MASK);
+ if (stat) {
+ unsigned int hwirq = __fls(stat);
+ handle_IRQ(hwirq, regs);
+ return;
+ }
+}
+#endif
+
void __init orion5x_init_irq(void)
{
orion_irq_init(0, MAIN_IRQ_MASK);
+#ifdef CONFIG_MULTI_IRQ_HANDLER
+ set_handle_irq(orion5x_legacy_handle_irq);
+#endif
+
/*
* Initialize gpiolib for GPIOs 0-31.
*/
diff --git a/arch/arm/mach-orion5x/mss2-setup.c b/arch/arm/mach-orion5x/mss2-setup.c
deleted file mode 100644
index e105130ba51c..000000000000
--- a/arch/arm/mach-orion5x/mss2-setup.c
+++ /dev/null
@@ -1,274 +0,0 @@
-/*
- * Maxtor Shared Storage II Board Setup
- *
- * Maintainer: Sylver Bruneau <sylver.bruneau@googlemail.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/pci.h>
-#include <linux/irq.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/leds.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/i2c.h>
-#include <linux/ata_platform.h>
-#include <linux/gpio.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/pci.h>
-#include <mach/orion5x.h>
-#include <mach/bridge-regs.h>
-#include "common.h"
-#include "mpp.h"
-
-#define MSS2_NOR_BOOT_BASE 0xff800000
-#define MSS2_NOR_BOOT_SIZE SZ_256K
-
-/*****************************************************************************
- * Maxtor Shared Storage II Info
- ****************************************************************************/
-
-/*
- * Maxtor Shared Storage II hardware :
- * - Marvell 88F5182-A2 C500
- * - Marvell 88E1111 Gigabit Ethernet PHY
- * - RTC M41T81 (@0x68) on I2C bus
- * - 256KB NOR flash
- * - 64MB of RAM
- */
-
-/*****************************************************************************
- * 256KB NOR Flash on BOOT Device
- ****************************************************************************/
-
-static struct physmap_flash_data mss2_nor_flash_data = {
- .width = 1,
-};
-
-static struct resource mss2_nor_flash_resource = {
- .flags = IORESOURCE_MEM,
- .start = MSS2_NOR_BOOT_BASE,
- .end = MSS2_NOR_BOOT_BASE + MSS2_NOR_BOOT_SIZE - 1,
-};
-
-static struct platform_device mss2_nor_flash = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &mss2_nor_flash_data,
- },
- .resource = &mss2_nor_flash_resource,
- .num_resources = 1,
-};
-
-/****************************************************************************
- * PCI setup
- ****************************************************************************/
-static int __init mss2_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
- int irq;
-
- /*
- * Check for devices with hard-wired IRQs.
- */
- irq = orion5x_pci_map_irq(dev, slot, pin);
- if (irq != -1)
- return irq;
-
- return -1;
-}
-
-static struct hw_pci mss2_pci __initdata = {
- .nr_controllers = 2,
- .setup = orion5x_pci_sys_setup,
- .scan = orion5x_pci_sys_scan_bus,
- .map_irq = mss2_pci_map_irq,
-};
-
-static int __init mss2_pci_init(void)
-{
- if (machine_is_mss2())
- pci_common_init(&mss2_pci);
-
- return 0;
-}
-subsys_initcall(mss2_pci_init);
-
-
-/*****************************************************************************
- * Ethernet
- ****************************************************************************/
-
-static struct mv643xx_eth_platform_data mss2_eth_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(8),
-};
-
-/*****************************************************************************
- * SATA
- ****************************************************************************/
-
-static struct mv_sata_platform_data mss2_sata_data = {
- .n_ports = 2,
-};
-
-/*****************************************************************************
- * GPIO buttons
- ****************************************************************************/
-
-#define MSS2_GPIO_KEY_RESET 12
-#define MSS2_GPIO_KEY_POWER 11
-
-static struct gpio_keys_button mss2_buttons[] = {
- {
- .code = KEY_POWER,
- .gpio = MSS2_GPIO_KEY_POWER,
- .desc = "Power",
- .active_low = 1,
- }, {
- .code = KEY_RESTART,
- .gpio = MSS2_GPIO_KEY_RESET,
- .desc = "Reset",
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_platform_data mss2_button_data = {
- .buttons = mss2_buttons,
- .nbuttons = ARRAY_SIZE(mss2_buttons),
-};
-
-static struct platform_device mss2_button_device = {
- .name = "gpio-keys",
- .id = -1,
- .dev = {
- .platform_data = &mss2_button_data,
- },
-};
-
-/*****************************************************************************
- * RTC m41t81 on I2C bus
- ****************************************************************************/
-
-#define MSS2_GPIO_RTC_IRQ 3
-
-static struct i2c_board_info __initdata mss2_i2c_rtc = {
- I2C_BOARD_INFO("m41t81", 0x68),
-};
-
-/*****************************************************************************
- * MSS2 power off method
- ****************************************************************************/
-/*
- * On the Maxtor Shared Storage II, the shutdown process is the following :
- * - Userland modifies U-boot env to tell U-boot to go idle at next boot
- * - The board reboots
- * - U-boot starts and go into an idle mode until the user press "power"
- */
-static void mss2_power_off(void)
-{
- u32 reg;
-
- /*
- * Enable and issue soft reset
- */
- reg = readl(RSTOUTn_MASK);
- reg |= 1 << 2;
- writel(reg, RSTOUTn_MASK);
-
- reg = readl(CPU_SOFT_RESET);
- reg |= 1;
- writel(reg, CPU_SOFT_RESET);
-}
-
-/****************************************************************************
- * General Setup
- ****************************************************************************/
-static unsigned int mss2_mpp_modes[] __initdata = {
- MPP0_GPIO, /* Power LED */
- MPP1_GPIO, /* Error LED */
- MPP2_UNUSED,
- MPP3_GPIO, /* RTC interrupt */
- MPP4_GPIO, /* HDD ind. (Single/Dual)*/
- MPP5_GPIO, /* HD0 5V control */
- MPP6_GPIO, /* HD0 12V control */
- MPP7_GPIO, /* HD1 5V control */
- MPP8_GPIO, /* HD1 12V control */
- MPP9_UNUSED,
- MPP10_GPIO, /* Fan control */
- MPP11_GPIO, /* Power button */
- MPP12_GPIO, /* Reset button */
- MPP13_UNUSED,
- MPP14_SATA_LED, /* SATA 0 active */
- MPP15_SATA_LED, /* SATA 1 active */
- MPP16_UNUSED,
- MPP17_UNUSED,
- MPP18_UNUSED,
- MPP19_UNUSED,
- 0,
-};
-
-static void __init mss2_init(void)
-{
- /* Setup basic Orion functions. Need to be called early. */
- orion5x_init();
-
- orion5x_mpp_conf(mss2_mpp_modes);
-
- /*
- * MPP[20] Unused
- * MPP[21] PCI clock
- * MPP[22] USB 0 over current
- * MPP[23] USB 1 over current
- */
-
- /*
- * Configure peripherals.
- */
- orion5x_ehci0_init();
- orion5x_ehci1_init();
- orion5x_eth_init(&mss2_eth_data);
- orion5x_i2c_init();
- orion5x_sata_init(&mss2_sata_data);
- orion5x_uart0_init();
- orion5x_xor_init();
-
- mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
- ORION_MBUS_DEVBUS_BOOT_ATTR,
- MSS2_NOR_BOOT_BASE,
- MSS2_NOR_BOOT_SIZE);
- platform_device_register(&mss2_nor_flash);
-
- platform_device_register(&mss2_button_device);
-
- if (gpio_request(MSS2_GPIO_RTC_IRQ, "rtc") == 0) {
- if (gpio_direction_input(MSS2_GPIO_RTC_IRQ) == 0)
- mss2_i2c_rtc.irq = gpio_to_irq(MSS2_GPIO_RTC_IRQ);
- else
- gpio_free(MSS2_GPIO_RTC_IRQ);
- }
- i2c_register_board_info(0, &mss2_i2c_rtc, 1);
-
- /* register mss2 specific power-off method */
- pm_power_off = mss2_power_off;
-}
-
-MACHINE_START(MSS2, "Maxtor Shared Storage II")
- /* Maintainer: Sylver Bruneau <sylver.bruneau@googlemail.com> */
- .atag_offset = 0x100,
- .init_machine = mss2_init,
- .map_io = orion5x_map_io,
- .init_early = orion5x_init_early,
- .init_irq = orion5x_init_irq,
- .init_time = orion5x_timer_init,
- .fixup = tag_fixup_mem32,
- .restart = orion5x_restart,
-MACHINE_END
diff --git a/arch/arm/mach-qcom/Kconfig b/arch/arm/mach-qcom/Kconfig
index 6aa22147cace..fd2b99dceb89 100644
--- a/arch/arm/mach-qcom/Kconfig
+++ b/arch/arm/mach-qcom/Kconfig
@@ -2,7 +2,9 @@ config ARCH_QCOM
bool "Qualcomm Support" if ARCH_MULTI_V7
select ARCH_REQUIRE_GPIOLIB
select ARM_GIC
+ select ARM_AMBA
select CLKSRC_OF
+ select PINCTRL
select QCOM_SCM if SMP
help
Support for Qualcomm's devicetree based systems.
diff --git a/arch/arm/mach-rockchip/core.h b/arch/arm/mach-rockchip/core.h
index e2e7c9dbb200..39bca96b555a 100644
--- a/arch/arm/mach-rockchip/core.h
+++ b/arch/arm/mach-rockchip/core.h
@@ -18,5 +18,3 @@ extern char rockchip_secondary_trampoline_end;
extern unsigned long rockchip_boot_fn;
extern void rockchip_secondary_startup(void);
-
-extern struct smp_operations rockchip_smp_ops;
diff --git a/arch/arm/mach-rockchip/platsmp.c b/arch/arm/mach-rockchip/platsmp.c
index 072842f6491b..910835d4ccf4 100644
--- a/arch/arm/mach-rockchip/platsmp.c
+++ b/arch/arm/mach-rockchip/platsmp.c
@@ -178,7 +178,8 @@ static void __init rockchip_smp_prepare_cpus(unsigned int max_cpus)
pmu_set_power_domain(0 + i, false);
}
-struct smp_operations rockchip_smp_ops __initdata = {
+static struct smp_operations rockchip_smp_ops __initdata = {
.smp_prepare_cpus = rockchip_smp_prepare_cpus,
.smp_boot_secondary = rockchip_boot_secondary,
};
+CPU_METHOD_OF_DECLARE(rk3066_smp, "rockchip,rk3066-smp", &rockchip_smp_ops);
diff --git a/arch/arm/mach-rockchip/rockchip.c b/arch/arm/mach-rockchip/rockchip.c
index d211d6fa0d98..4499b0a31a27 100644
--- a/arch/arm/mach-rockchip/rockchip.c
+++ b/arch/arm/mach-rockchip/rockchip.c
@@ -39,7 +39,6 @@ static const char * const rockchip_board_dt_compat[] = {
};
DT_MACHINE_START(ROCKCHIP_DT, "Rockchip Cortex-A9 (Device Tree)")
- .smp = smp_ops(rockchip_smp_ops),
.init_machine = rockchip_dt_init,
.dt_compat = rockchip_board_dt_compat,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index 45a7026e9419..04284de7aca5 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -18,17 +18,7 @@ config PLAT_S3C24XX
help
Base platform code for any Samsung S3C24XX device
-config S3C2410_COMMON_CLK
- bool
- help
- Build the s3c2410 clock driver based on the common clock framework.
-config S3C2410_COMMON_DCLK
- bool
- select REGMAP_MMIO
- help
- Temporary symbol to build the dclk driver based on the common clock
- framework.
menu "SAMSUNG S3C24XX SoCs Support"
@@ -37,7 +27,6 @@ comment "S3C24XX SoCs"
config CPU_S3C2410
bool "SAMSUNG S3C2410"
default y
- select COMMON_CLK
select CPU_ARM920T
select S3C2410_COMMON_CLK
select S3C2410_DMA if S3C24XX_DMA
@@ -50,7 +39,6 @@ config CPU_S3C2410
config CPU_S3C2412
bool "SAMSUNG S3C2412"
- select COMMON_CLK
select CPU_ARM926T
select S3C2412_COMMON_CLK
select S3C2412_DMA if S3C24XX_DMA
@@ -60,7 +48,6 @@ config CPU_S3C2412
config CPU_S3C2416
bool "SAMSUNG S3C2416/S3C2450"
- select COMMON_CLK
select CPU_ARM926T
select S3C2416_PM if PM
select S3C2443_COMMON_CLK
@@ -70,7 +57,6 @@ config CPU_S3C2416
config CPU_S3C2440
bool "SAMSUNG S3C2440"
- select COMMON_CLK
select CPU_ARM920T
select S3C2410_COMMON_CLK
select S3C2410_PM if PM
@@ -80,7 +66,6 @@ config CPU_S3C2440
config CPU_S3C2442
bool "SAMSUNG S3C2442"
- select COMMON_CLK
select CPU_ARM920T
select S3C2410_COMMON_CLK
select S3C2410_DMA if S3C24XX_DMA
@@ -95,7 +80,6 @@ config CPU_S3C244X
config CPU_S3C2443
bool "SAMSUNG S3C2443"
- select COMMON_CLK
select CPU_ARM920T
select S3C2443_COMMON_CLK
select S3C2443_DMA if S3C24XX_DMA
@@ -236,7 +220,7 @@ config ARCH_BAST
bool "Simtec Electronics BAST (EB2410ITX)"
select ISA
select MACH_BAST_IDE
- select S3C2410_COMMON_DCLK if COMMON_CLK
+ select S3C2410_COMMON_DCLK
select S3C2410_IOTIMING if ARM_S3C2410_CPUFREQ
select S3C24XX_SIMTEC_NOR
select S3C24XX_SIMTEC_PM if PM
@@ -318,7 +302,7 @@ config MACH_TCT_HAMMER
config MACH_VR1000
bool "Thorcom VR1000"
select MACH_BAST_IDE
- select S3C2410_COMMON_DCLK if COMMON_CLK
+ select S3C2410_COMMON_DCLK
select S3C24XX_SIMTEC_NOR
select S3C24XX_SIMTEC_PM if PM
select S3C24XX_SIMTEC_USB
@@ -337,11 +321,6 @@ config S3C2412_PM_SLEEP
if CPU_S3C2412
-config S3C2412_COMMON_CLK
- bool
- help
- Build the s3c2412 clock driver based on the common clock framework.
-
config CPU_S3C2412_ONLY
bool
depends on !CPU_S3C2410 && !CPU_S3C2416 && !CPU_S3C2440 && \
@@ -502,7 +481,7 @@ comment "S3C2440 Boards"
config MACH_ANUBIS
bool "Simtec Electronics ANUBIS"
select HAVE_PATA_PLATFORM
- select S3C2410_COMMON_DCLK if COMMON_CLK
+ select S3C2410_COMMON_DCLK
select S3C2440_XTAL_12000000
select S3C24XX_SIMTEC_PM if PM
select S3C_DEV_USB_HOST
@@ -541,7 +520,7 @@ config MACH_NEXCODER_2440
config MACH_OSIRIS
bool "Simtec IM2440D20 (OSIRIS) module"
- select S3C2410_COMMON_DCLK if COMMON_CLK
+ select S3C2410_COMMON_DCLK
select S3C2410_IOTIMING if ARM_S3C2440_CPUFREQ
select S3C2440_XTAL_12000000
select S3C24XX_SIMTEC_PM if PM
@@ -612,7 +591,7 @@ config MACH_RX1950
bool "HP iPAQ rx1950"
select I2C
select PM_H1940 if PM
- select S3C2410_COMMON_DCLK if COMMON_CLK
+ select S3C2410_COMMON_DCLK
select S3C2410_IOTIMING if ARM_S3C2440_CPUFREQ
select S3C2440_XTAL_16934400
select S3C24XX_PWM
@@ -624,12 +603,6 @@ endif # CPU_S3C2442
if CPU_S3C2443 || CPU_S3C2416
-config S3C2443_COMMON_CLK
- bool
- help
- Temporary symbol to build the clock driver based on the common clock
- framework.
-
config S3C2443_DMA
bool
help
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 62eaa42cb13a..49d90ca62e87 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -107,6 +107,7 @@ config ARCH_R8A7778
select SH_CLK_CPG
select ARM_GIC
select SYS_SUPPORTS_SH_TMU
+ select RENESAS_INTC_IRQPIN
config ARCH_R8A7779
bool "R-Car H1 (R8A77790)"
@@ -139,16 +140,6 @@ config ARCH_R8A7791
select SYS_SUPPORTS_SH_CMT
select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE
-config ARCH_EMEV2
- bool "Emma Mobile EV2"
- select ARCH_WANT_OPTIONAL_GPIOLIB
- select ARM_GIC
- select CPU_V7
- select MIGHT_HAVE_PCI
- select USE_OF
- select AUTO_ZRELADDR
- select SYS_SUPPORTS_EM_STI
-
config ARCH_R7S72100
bool "RZ/A1H (R7S72100)"
select ARCH_WANT_OPTIONAL_GPIOLIB
@@ -215,7 +206,6 @@ config MACH_BOCKW
depends on ARCH_R8A7778
select ARCH_REQUIRE_GPIOLIB
select REGULATOR_FIXED_VOLTAGE if REGULATOR
- select RENESAS_INTC_IRQPIN
select SND_SOC_AK4554 if SND_SIMPLE_CARD
select SND_SOC_AK4642 if SND_SIMPLE_CARD
select USE_OF
@@ -224,7 +214,6 @@ config MACH_BOCKW_REFERENCE
bool "BOCK-W - Reference Device Tree Implementation"
depends on ARCH_R8A7778
select ARCH_REQUIRE_GPIOLIB
- select RENESAS_INTC_IRQPIN
select REGULATOR_FIXED_VOLTAGE if REGULATOR
select USE_OF
---help---
diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
index 4caffc912a81..9c5cd8c53a85 100644
--- a/arch/arm/mach-shmobile/Makefile
+++ b/arch/arm/mach-shmobile/Makefile
@@ -21,8 +21,8 @@ obj-$(CONFIG_ARCH_EMEV2) += setup-emev2.o
obj-$(CONFIG_ARCH_R7S72100) += setup-r7s72100.o
# Clock objects
-ifndef CONFIG_COMMON_CLK
obj-y += clock.o
+ifndef CONFIG_COMMON_CLK
obj-$(CONFIG_ARCH_SH7372) += clock-sh7372.o
obj-$(CONFIG_ARCH_SH73A0) += clock-sh73a0.o
obj-$(CONFIG_ARCH_R8A73A4) += clock-r8a73a4.o
@@ -31,7 +31,6 @@ obj-$(CONFIG_ARCH_R8A7778) += clock-r8a7778.o
obj-$(CONFIG_ARCH_R8A7779) += clock-r8a7779.o
obj-$(CONFIG_ARCH_R8A7790) += clock-r8a7790.o
obj-$(CONFIG_ARCH_R8A7791) += clock-r8a7791.o
-obj-$(CONFIG_ARCH_EMEV2) += clock-emev2.o
obj-$(CONFIG_ARCH_R7S72100) += clock-r7s72100.o
endif
diff --git a/arch/arm/mach-shmobile/board-armadillo800eva-reference.c b/arch/arm/mach-shmobile/board-armadillo800eva-reference.c
index 57d1a78367b6..57d246eb8813 100644
--- a/arch/arm/mach-shmobile/board-armadillo800eva-reference.c
+++ b/arch/arm/mach-shmobile/board-armadillo800eva-reference.c
@@ -187,7 +187,7 @@ static const char *eva_boards_compat_dt[] __initdata = {
DT_MACHINE_START(ARMADILLO800EVA_DT, "armadillo800eva-reference")
.map_io = r8a7740_map_io,
- .init_early = r8a7740_init_delay,
+ .init_early = shmobile_init_delay,
.init_irq = r8a7740_init_irq_of,
.init_machine = eva_init,
.init_late = shmobile_init_late,
diff --git a/arch/arm/mach-shmobile/board-koelsch-reference.c b/arch/arm/mach-shmobile/board-koelsch-reference.c
index a3fd30242bd8..ff33d9c4b658 100644
--- a/arch/arm/mach-shmobile/board-koelsch-reference.c
+++ b/arch/arm/mach-shmobile/board-koelsch-reference.c
@@ -139,7 +139,7 @@ static const char * const koelsch_boards_compat_dt[] __initconst = {
DT_MACHINE_START(KOELSCH_DT, "koelsch")
.smp = smp_ops(r8a7791_smp_ops),
- .init_early = r8a7791_init_early,
+ .init_early = shmobile_init_delay,
.init_time = rcar_gen2_timer_init,
.init_machine = koelsch_add_standard_devices,
.init_late = shmobile_init_late,
diff --git a/arch/arm/mach-shmobile/board-koelsch.c b/arch/arm/mach-shmobile/board-koelsch.c
index 5a034ff405d0..3cd8008d09dd 100644
--- a/arch/arm/mach-shmobile/board-koelsch.c
+++ b/arch/arm/mach-shmobile/board-koelsch.c
@@ -522,7 +522,7 @@ static const char * const koelsch_boards_compat_dt[] __initconst = {
DT_MACHINE_START(KOELSCH_DT, "koelsch")
.smp = smp_ops(r8a7791_smp_ops),
- .init_early = r8a7791_init_early,
+ .init_early = shmobile_init_delay,
.init_time = rcar_gen2_timer_init,
.init_machine = koelsch_init,
.init_late = shmobile_init_late,
diff --git a/arch/arm/mach-shmobile/clock-emev2.c b/arch/arm/mach-shmobile/clock-emev2.c
deleted file mode 100644
index 5ac13ba71d54..000000000000
--- a/arch/arm/mach-shmobile/clock-emev2.c
+++ /dev/null
@@ -1,231 +0,0 @@
-/*
- * Emma Mobile EV2 clock framework support
- *
- * Copyright (C) 2012 Magnus Damm
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/sh_clk.h>
-#include <linux/clkdev.h>
-#include <mach/common.h>
-
-#define EMEV2_SMU_BASE 0xe0110000
-
-/* EMEV2 SMU registers */
-#define USIAU0_RSTCTRL 0x094
-#define USIBU1_RSTCTRL 0x0ac
-#define USIBU2_RSTCTRL 0x0b0
-#define USIBU3_RSTCTRL 0x0b4
-#define STI_RSTCTRL 0x124
-#define USIAU0GCLKCTRL 0x4a0
-#define USIBU1GCLKCTRL 0x4b8
-#define USIBU2GCLKCTRL 0x4bc
-#define USIBU3GCLKCTRL 0x04c0
-#define STIGCLKCTRL 0x528
-#define USIAU0SCLKDIV 0x61c
-#define USIB2SCLKDIV 0x65c
-#define USIB3SCLKDIV 0x660
-#define STI_CLKSEL 0x688
-
-/* not pretty, but hey */
-static void __iomem *smu_base;
-
-static void emev2_smu_write(unsigned long value, int offs)
-{
- BUG_ON(!smu_base || (offs >= PAGE_SIZE));
- iowrite32(value, smu_base + offs);
-}
-
-static struct clk_mapping smu_mapping = {
- .phys = EMEV2_SMU_BASE,
- .len = PAGE_SIZE,
-};
-
-/* Fixed 32 KHz root clock from C32K pin */
-static struct clk c32k_clk = {
- .rate = 32768,
- .mapping = &smu_mapping,
-};
-
-/* PLL3 multiplies C32K with 7000 */
-static unsigned long pll3_recalc(struct clk *clk)
-{
- return clk->parent->rate * 7000;
-}
-
-static struct sh_clk_ops pll3_clk_ops = {
- .recalc = pll3_recalc,
-};
-
-static struct clk pll3_clk = {
- .ops = &pll3_clk_ops,
- .parent = &c32k_clk,
-};
-
-static struct clk *main_clks[] = {
- &c32k_clk,
- &pll3_clk,
-};
-
-enum { SCLKDIV_USIAU0, SCLKDIV_USIBU2, SCLKDIV_USIBU1, SCLKDIV_USIBU3,
- SCLKDIV_NR };
-
-#define SCLKDIV(_reg, _shift) \
-{ \
- .parent = &pll3_clk, \
- .enable_reg = IOMEM(EMEV2_SMU_BASE + (_reg)), \
- .enable_bit = _shift, \
-}
-
-static struct clk sclkdiv_clks[SCLKDIV_NR] = {
- [SCLKDIV_USIAU0] = SCLKDIV(USIAU0SCLKDIV, 0),
- [SCLKDIV_USIBU2] = SCLKDIV(USIB2SCLKDIV, 16),
- [SCLKDIV_USIBU1] = SCLKDIV(USIB2SCLKDIV, 0),
- [SCLKDIV_USIBU3] = SCLKDIV(USIB3SCLKDIV, 0),
-};
-
-enum { GCLK_USIAU0_SCLK, GCLK_USIBU1_SCLK, GCLK_USIBU2_SCLK, GCLK_USIBU3_SCLK,
- GCLK_STI_SCLK,
- GCLK_NR };
-
-#define GCLK_SCLK(_parent, _reg) \
-{ \
- .parent = _parent, \
- .enable_reg = IOMEM(EMEV2_SMU_BASE + (_reg)), \
- .enable_bit = 1, /* SCLK_GCC */ \
-}
-
-static struct clk gclk_clks[GCLK_NR] = {
- [GCLK_USIAU0_SCLK] = GCLK_SCLK(&sclkdiv_clks[SCLKDIV_USIAU0],
- USIAU0GCLKCTRL),
- [GCLK_USIBU1_SCLK] = GCLK_SCLK(&sclkdiv_clks[SCLKDIV_USIBU1],
- USIBU1GCLKCTRL),
- [GCLK_USIBU2_SCLK] = GCLK_SCLK(&sclkdiv_clks[SCLKDIV_USIBU2],
- USIBU2GCLKCTRL),
- [GCLK_USIBU3_SCLK] = GCLK_SCLK(&sclkdiv_clks[SCLKDIV_USIBU3],
- USIBU3GCLKCTRL),
- [GCLK_STI_SCLK] = GCLK_SCLK(&c32k_clk, STIGCLKCTRL),
-};
-
-static int emev2_gclk_enable(struct clk *clk)
-{
- iowrite32(ioread32(clk->mapped_reg) | (1 << clk->enable_bit),
- clk->mapped_reg);
- return 0;
-}
-
-static void emev2_gclk_disable(struct clk *clk)
-{
- iowrite32(ioread32(clk->mapped_reg) & ~(1 << clk->enable_bit),
- clk->mapped_reg);
-}
-
-static struct sh_clk_ops emev2_gclk_clk_ops = {
- .enable = emev2_gclk_enable,
- .disable = emev2_gclk_disable,
- .recalc = followparent_recalc,
-};
-
-static int __init emev2_gclk_register(struct clk *clks, int nr)
-{
- struct clk *clkp;
- int ret = 0;
- int k;
-
- for (k = 0; !ret && (k < nr); k++) {
- clkp = clks + k;
- clkp->ops = &emev2_gclk_clk_ops;
- ret |= clk_register(clkp);
- }
-
- return ret;
-}
-
-static unsigned long emev2_sclkdiv_recalc(struct clk *clk)
-{
- unsigned int sclk_div;
-
- sclk_div = (ioread32(clk->mapped_reg) >> clk->enable_bit) & 0xff;
-
- return clk->parent->rate / (sclk_div + 1);
-}
-
-static struct sh_clk_ops emev2_sclkdiv_clk_ops = {
- .recalc = emev2_sclkdiv_recalc,
-};
-
-static int __init emev2_sclkdiv_register(struct clk *clks, int nr)
-{
- struct clk *clkp;
- int ret = 0;
- int k;
-
- for (k = 0; !ret && (k < nr); k++) {
- clkp = clks + k;
- clkp->ops = &emev2_sclkdiv_clk_ops;
- ret |= clk_register(clkp);
- }
-
- return ret;
-}
-
-static struct clk_lookup lookups[] = {
- CLKDEV_DEV_ID("serial8250-em.0", &gclk_clks[GCLK_USIAU0_SCLK]),
- CLKDEV_DEV_ID("e1020000.uart", &gclk_clks[GCLK_USIAU0_SCLK]),
- CLKDEV_DEV_ID("serial8250-em.1", &gclk_clks[GCLK_USIBU1_SCLK]),
- CLKDEV_DEV_ID("e1030000.uart", &gclk_clks[GCLK_USIBU1_SCLK]),
- CLKDEV_DEV_ID("serial8250-em.2", &gclk_clks[GCLK_USIBU2_SCLK]),
- CLKDEV_DEV_ID("e1040000.uart", &gclk_clks[GCLK_USIBU2_SCLK]),
- CLKDEV_DEV_ID("serial8250-em.3", &gclk_clks[GCLK_USIBU3_SCLK]),
- CLKDEV_DEV_ID("e1050000.uart", &gclk_clks[GCLK_USIBU3_SCLK]),
- CLKDEV_DEV_ID("em_sti.0", &gclk_clks[GCLK_STI_SCLK]),
- CLKDEV_DEV_ID("e0180000.sti", &gclk_clks[GCLK_STI_SCLK]),
-};
-
-void __init emev2_clock_init(void)
-{
- int k, ret = 0;
-
- smu_base = ioremap(EMEV2_SMU_BASE, PAGE_SIZE);
- BUG_ON(!smu_base);
-
- /* setup STI timer to run on 32.768 kHz and deassert reset */
- emev2_smu_write(0, STI_CLKSEL);
- emev2_smu_write(1, STI_RSTCTRL);
-
- /* deassert reset for UART0->UART3 */
- emev2_smu_write(2, USIAU0_RSTCTRL);
- emev2_smu_write(2, USIBU1_RSTCTRL);
- emev2_smu_write(2, USIBU2_RSTCTRL);
- emev2_smu_write(2, USIBU3_RSTCTRL);
-
- for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
- ret = clk_register(main_clks[k]);
-
- if (!ret)
- ret = emev2_sclkdiv_register(sclkdiv_clks, SCLKDIV_NR);
-
- if (!ret)
- ret = emev2_gclk_register(gclk_clks, GCLK_NR);
-
- clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
- if (!ret)
- shmobile_clk_init();
- else
- panic("failed to setup emev2 clocks\n");
-}
diff --git a/arch/arm/mach-shmobile/clock-r8a7740.c b/arch/arm/mach-shmobile/clock-r8a7740.c
index dd989f93498f..433ec674ead1 100644
--- a/arch/arm/mach-shmobile/clock-r8a7740.c
+++ b/arch/arm/mach-shmobile/clock-r8a7740.c
@@ -596,7 +596,7 @@ static struct clk_lookup lookups[] = {
CLKDEV_DEV_ID("sh_mmcif", &mstp_clks[MSTP312]),
CLKDEV_DEV_ID("e6bd0000.mmc", &mstp_clks[MSTP312]),
CLKDEV_DEV_ID("r8a7740-gether", &mstp_clks[MSTP309]),
- CLKDEV_DEV_ID("e9a00000.sh-eth", &mstp_clks[MSTP309]),
+ CLKDEV_DEV_ID("e9a00000.ethernet", &mstp_clks[MSTP309]),
CLKDEV_DEV_ID("renesas-tpu-pwm", &mstp_clks[MSTP304]),
CLKDEV_DEV_ID("e6600000.pwm", &mstp_clks[MSTP304]),
diff --git a/arch/arm/mach-shmobile/clock-r8a7778.c b/arch/arm/mach-shmobile/clock-r8a7778.c
index 9989b1b06ffd..6609beb9b9b4 100644
--- a/arch/arm/mach-shmobile/clock-r8a7778.c
+++ b/arch/arm/mach-shmobile/clock-r8a7778.c
@@ -175,10 +175,6 @@ static struct clk mstp_clks[MSTP_NR] = {
static struct clk_lookup lookups[] = {
/* main */
- CLKDEV_CON_ID("audio_clk_a", &audio_clk_a),
- CLKDEV_CON_ID("audio_clk_b", &audio_clk_b),
- CLKDEV_CON_ID("audio_clk_c", &audio_clk_c),
- CLKDEV_CON_ID("audio_clk_internal", &s1_clk),
CLKDEV_CON_ID("shyway_clk", &s_clk),
CLKDEV_CON_ID("peripheral_clk", &p_clk),
@@ -234,15 +230,15 @@ static struct clk_lookup lookups[] = {
CLKDEV_ICK_ID("ssi.6", "rcar_sound", &mstp_clks[MSTP309]),
CLKDEV_ICK_ID("ssi.7", "rcar_sound", &mstp_clks[MSTP308]),
CLKDEV_ICK_ID("ssi.8", "rcar_sound", &mstp_clks[MSTP307]),
- CLKDEV_ICK_ID("scu.0", "rcar_sound", &mstp_clks[MSTP531]),
- CLKDEV_ICK_ID("scu.1", "rcar_sound", &mstp_clks[MSTP530]),
- CLKDEV_ICK_ID("scu.2", "rcar_sound", &mstp_clks[MSTP529]),
- CLKDEV_ICK_ID("scu.3", "rcar_sound", &mstp_clks[MSTP528]),
- CLKDEV_ICK_ID("scu.4", "rcar_sound", &mstp_clks[MSTP527]),
- CLKDEV_ICK_ID("scu.5", "rcar_sound", &mstp_clks[MSTP526]),
- CLKDEV_ICK_ID("scu.6", "rcar_sound", &mstp_clks[MSTP525]),
- CLKDEV_ICK_ID("scu.7", "rcar_sound", &mstp_clks[MSTP524]),
- CLKDEV_ICK_ID("scu.8", "rcar_sound", &mstp_clks[MSTP523]),
+ CLKDEV_ICK_ID("src.0", "rcar_sound", &mstp_clks[MSTP531]),
+ CLKDEV_ICK_ID("src.1", "rcar_sound", &mstp_clks[MSTP530]),
+ CLKDEV_ICK_ID("src.2", "rcar_sound", &mstp_clks[MSTP529]),
+ CLKDEV_ICK_ID("src.3", "rcar_sound", &mstp_clks[MSTP528]),
+ CLKDEV_ICK_ID("src.4", "rcar_sound", &mstp_clks[MSTP527]),
+ CLKDEV_ICK_ID("src.5", "rcar_sound", &mstp_clks[MSTP526]),
+ CLKDEV_ICK_ID("src.6", "rcar_sound", &mstp_clks[MSTP525]),
+ CLKDEV_ICK_ID("src.7", "rcar_sound", &mstp_clks[MSTP524]),
+ CLKDEV_ICK_ID("src.8", "rcar_sound", &mstp_clks[MSTP523]),
};
void __init r8a7778_clock_init(void)
diff --git a/arch/arm/mach-shmobile/clock-r8a7790.c b/arch/arm/mach-shmobile/clock-r8a7790.c
index 3f93503f5b96..a936ae7de083 100644
--- a/arch/arm/mach-shmobile/clock-r8a7790.c
+++ b/arch/arm/mach-shmobile/clock-r8a7790.c
@@ -249,10 +249,10 @@ static struct clk mstp_clks[MSTP_NR] = {
[MSTP1007] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR10, 7, MSTPSR10, 0), /* SSI8 */
[MSTP1006] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR10, 6, MSTPSR10, 0), /* SSI9 */
[MSTP1005] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR10, 5, MSTPSR10, 0), /* SSI ALL */
- [MSTP931] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR9, 31, MSTPSR9, 0), /* I2C0 */
- [MSTP930] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR9, 30, MSTPSR9, 0), /* I2C1 */
- [MSTP929] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR9, 29, MSTPSR9, 0), /* I2C2 */
- [MSTP928] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR9, 28, MSTPSR9, 0), /* I2C3 */
+ [MSTP931] = SH_CLK_MSTP32_STS(&hp_clk, SMSTPCR9, 31, MSTPSR9, 0), /* I2C0 */
+ [MSTP930] = SH_CLK_MSTP32_STS(&hp_clk, SMSTPCR9, 30, MSTPSR9, 0), /* I2C1 */
+ [MSTP929] = SH_CLK_MSTP32_STS(&hp_clk, SMSTPCR9, 29, MSTPSR9, 0), /* I2C2 */
+ [MSTP928] = SH_CLK_MSTP32_STS(&hp_clk, SMSTPCR9, 28, MSTPSR9, 0), /* I2C3 */
[MSTP917] = SH_CLK_MSTP32_STS(&qspi_clk, SMSTPCR9, 17, MSTPSR9, 0), /* QSPI */
[MSTP815] = SH_CLK_MSTP32_STS(&zs_clk, SMSTPCR8, 15, MSTPSR8, 0), /* SATA0 */
[MSTP814] = SH_CLK_MSTP32_STS(&zs_clk, SMSTPCR8, 14, MSTPSR8, 0), /* SATA1 */
@@ -294,10 +294,6 @@ static struct clk mstp_clks[MSTP_NR] = {
static struct clk_lookup lookups[] = {
/* main clocks */
- CLKDEV_CON_ID("audio_clk_a", &audio_clk_a),
- CLKDEV_CON_ID("audio_clk_b", &audio_clk_b),
- CLKDEV_CON_ID("audio_clk_c", &audio_clk_c),
- CLKDEV_CON_ID("audio_clk_internal", &m2_clk),
CLKDEV_CON_ID("extal", &extal_clk),
CLKDEV_CON_ID("extal_div2", &extal_div2_clk),
CLKDEV_CON_ID("main", &main_clk),
@@ -381,16 +377,16 @@ static struct clk_lookup lookups[] = {
CLKDEV_ICK_ID("clk_b", "rcar_sound", &audio_clk_b),
CLKDEV_ICK_ID("clk_c", "rcar_sound", &audio_clk_c),
CLKDEV_ICK_ID("clk_i", "rcar_sound", &m2_clk),
- CLKDEV_ICK_ID("scu.0", "rcar_sound", &mstp_clks[MSTP1031]),
- CLKDEV_ICK_ID("scu.1", "rcar_sound", &mstp_clks[MSTP1030]),
- CLKDEV_ICK_ID("scu.2", "rcar_sound", &mstp_clks[MSTP1029]),
- CLKDEV_ICK_ID("scu.3", "rcar_sound", &mstp_clks[MSTP1028]),
- CLKDEV_ICK_ID("scu.4", "rcar_sound", &mstp_clks[MSTP1027]),
- CLKDEV_ICK_ID("scu.5", "rcar_sound", &mstp_clks[MSTP1026]),
- CLKDEV_ICK_ID("scu.6", "rcar_sound", &mstp_clks[MSTP1025]),
- CLKDEV_ICK_ID("scu.7", "rcar_sound", &mstp_clks[MSTP1024]),
- CLKDEV_ICK_ID("scu.8", "rcar_sound", &mstp_clks[MSTP1023]),
- CLKDEV_ICK_ID("scu.9", "rcar_sound", &mstp_clks[MSTP1022]),
+ CLKDEV_ICK_ID("src.0", "rcar_sound", &mstp_clks[MSTP1031]),
+ CLKDEV_ICK_ID("src.1", "rcar_sound", &mstp_clks[MSTP1030]),
+ CLKDEV_ICK_ID("src.2", "rcar_sound", &mstp_clks[MSTP1029]),
+ CLKDEV_ICK_ID("src.3", "rcar_sound", &mstp_clks[MSTP1028]),
+ CLKDEV_ICK_ID("src.4", "rcar_sound", &mstp_clks[MSTP1027]),
+ CLKDEV_ICK_ID("src.5", "rcar_sound", &mstp_clks[MSTP1026]),
+ CLKDEV_ICK_ID("src.6", "rcar_sound", &mstp_clks[MSTP1025]),
+ CLKDEV_ICK_ID("src.7", "rcar_sound", &mstp_clks[MSTP1024]),
+ CLKDEV_ICK_ID("src.8", "rcar_sound", &mstp_clks[MSTP1023]),
+ CLKDEV_ICK_ID("src.9", "rcar_sound", &mstp_clks[MSTP1022]),
CLKDEV_ICK_ID("ssi.0", "rcar_sound", &mstp_clks[MSTP1015]),
CLKDEV_ICK_ID("ssi.1", "rcar_sound", &mstp_clks[MSTP1014]),
CLKDEV_ICK_ID("ssi.2", "rcar_sound", &mstp_clks[MSTP1013]),
diff --git a/arch/arm/mach-shmobile/clock-r8a7791.c b/arch/arm/mach-shmobile/clock-r8a7791.c
index 701383fe3267..3b26c7eee873 100644
--- a/arch/arm/mach-shmobile/clock-r8a7791.c
+++ b/arch/arm/mach-shmobile/clock-r8a7791.c
@@ -25,6 +25,7 @@
#include <linux/clkdev.h>
#include <mach/clock.h>
#include <mach/common.h>
+#include <mach/rcar-gen2.h>
/*
* MD EXTAL PLL0 PLL1 PLL3
@@ -43,8 +44,6 @@
* see "p1 / 2" on R8A7791_CLOCK_ROOT() below
*/
-#define MD(nr) (1 << nr)
-
#define CPG_BASE 0xe6150000
#define CPG_LEN 0x1000
@@ -68,7 +67,6 @@
#define MSTPSR9 IOMEM(0xe61509a4)
#define MSTPSR11 IOMEM(0xe61509ac)
-#define MODEMR 0xE6160060
#define SDCKCR 0xE6150074
#define SD1CKCR 0xE6150078
#define SD2CKCR 0xE615026c
@@ -190,12 +188,12 @@ static struct clk mstp_clks[MSTP_NR] = {
[MSTP1108] = SH_CLK_MSTP32_STS(&mp_clk, SMSTPCR11, 8, MSTPSR11, 0), /* SCIFA5 */
[MSTP1107] = SH_CLK_MSTP32_STS(&mp_clk, SMSTPCR11, 7, MSTPSR11, 0), /* SCIFA4 */
[MSTP1106] = SH_CLK_MSTP32_STS(&mp_clk, SMSTPCR11, 6, MSTPSR11, 0), /* SCIFA3 */
- [MSTP931] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR9, 31, MSTPSR9, 0), /* I2C0 */
- [MSTP930] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR9, 30, MSTPSR9, 0), /* I2C1 */
- [MSTP929] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR9, 29, MSTPSR9, 0), /* I2C2 */
- [MSTP928] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR9, 28, MSTPSR9, 0), /* I2C3 */
- [MSTP927] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR9, 27, MSTPSR9, 0), /* I2C4 */
- [MSTP925] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR9, 25, MSTPSR9, 0), /* I2C5 */
+ [MSTP931] = SH_CLK_MSTP32_STS(&hp_clk, SMSTPCR9, 31, MSTPSR9, 0), /* I2C0 */
+ [MSTP930] = SH_CLK_MSTP32_STS(&hp_clk, SMSTPCR9, 30, MSTPSR9, 0), /* I2C1 */
+ [MSTP929] = SH_CLK_MSTP32_STS(&hp_clk, SMSTPCR9, 29, MSTPSR9, 0), /* I2C2 */
+ [MSTP928] = SH_CLK_MSTP32_STS(&hp_clk, SMSTPCR9, 28, MSTPSR9, 0), /* I2C3 */
+ [MSTP927] = SH_CLK_MSTP32_STS(&hp_clk, SMSTPCR9, 27, MSTPSR9, 0), /* I2C4 */
+ [MSTP925] = SH_CLK_MSTP32_STS(&hp_clk, SMSTPCR9, 25, MSTPSR9, 0), /* I2C5 */
[MSTP917] = SH_CLK_MSTP32_STS(&qspi_clk, SMSTPCR9, 17, MSTPSR9, 0), /* QSPI */
[MSTP815] = SH_CLK_MSTP32_STS(&zs_clk, SMSTPCR8, 15, MSTPSR8, 0), /* SATA0 */
[MSTP814] = SH_CLK_MSTP32_STS(&zs_clk, SMSTPCR8, 14, MSTPSR8, 0), /* SATA1 */
@@ -295,14 +293,9 @@ static struct clk_lookup lookups[] = {
void __init r8a7791_clock_init(void)
{
- void __iomem *modemr = ioremap_nocache(MODEMR, PAGE_SIZE);
- u32 mode;
+ u32 mode = rcar_gen2_read_mode_pins();
int k, ret = 0;
- BUG_ON(!modemr);
- mode = ioread32(modemr);
- iounmap(modemr);
-
switch (mode & (MD(14) | MD(13))) {
case 0:
R8A7791_CLOCK_ROOT(15, &extal_clk, 172, 208, 106, 88);
diff --git a/arch/arm/mach-shmobile/clock.c b/arch/arm/mach-shmobile/clock.c
index ad7df629d995..e7232a0373b9 100644
--- a/arch/arm/mach-shmobile/clock.c
+++ b/arch/arm/mach-shmobile/clock.c
@@ -21,6 +21,32 @@
*/
#include <linux/kernel.h>
#include <linux/init.h>
+
+#ifdef CONFIG_COMMON_CLK
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <mach/clock.h>
+
+void __init shmobile_clk_workaround(const struct clk_name *clks,
+ int nr_clks, bool enable)
+{
+ const struct clk_name *clkn;
+ struct clk *clk;
+ unsigned int i;
+
+ for (i = 0; i < nr_clks; ++i) {
+ clkn = clks + i;
+ clk = clk_get(NULL, clkn->clk);
+ if (!IS_ERR(clk)) {
+ clk_register_clkdev(clk, clkn->con_id, clkn->dev_id);
+ if (enable)
+ clk_prepare_enable(clk);
+ clk_put(clk);
+ }
+ }
+}
+
+#else /* CONFIG_COMMON_CLK */
#include <linux/sh_clk.h>
#include <linux/export.h>
#include <mach/clock.h>
@@ -58,3 +84,5 @@ void __clk_put(struct clk *clk)
{
}
EXPORT_SYMBOL(__clk_put);
+
+#endif /* CONFIG_COMMON_CLK */
diff --git a/arch/arm/mach-shmobile/include/mach/clock.h b/arch/arm/mach-shmobile/include/mach/clock.h
index 03e56074928c..9a93cf924b9c 100644
--- a/arch/arm/mach-shmobile/include/mach/clock.h
+++ b/arch/arm/mach-shmobile/include/mach/clock.h
@@ -1,6 +1,21 @@
#ifndef CLOCK_H
#define CLOCK_H
+#ifdef CONFIG_COMMON_CLK
+/* temporary clock configuration helper for platform devices */
+
+struct clk_name {
+ const char *clk;
+ const char *con_id;
+ const char *dev_id;
+};
+
+void shmobile_clk_workaround(const struct clk_name *clks, int nr_clks,
+ bool enable);
+
+#else /* CONFIG_COMMON_CLK */
+/* legacy clock implementation */
+
unsigned long shmobile_fixed_ratio_clk_recalc(struct clk *clk);
extern struct sh_clk_ops shmobile_fixed_ratio_clk_ops;
@@ -36,4 +51,5 @@ do { \
(p)->div = d; \
} while (0)
+#endif /* CONFIG_COMMON_CLK */
#endif
diff --git a/arch/arm/mach-shmobile/include/mach/common.h b/arch/arm/mach-shmobile/include/mach/common.h
index cb8e32deb2a3..f7a360edcc35 100644
--- a/arch/arm/mach-shmobile/include/mach/common.h
+++ b/arch/arm/mach-shmobile/include/mach/common.h
@@ -4,6 +4,7 @@
extern void shmobile_earlytimer_init(void);
extern void shmobile_setup_delay(unsigned int max_cpu_core_mhz,
unsigned int mult, unsigned int div);
+extern void shmobile_init_delay(void);
struct twd_local_timer;
extern void shmobile_setup_console(void);
extern void shmobile_boot_vector(void);
diff --git a/arch/arm/mach-shmobile/include/mach/emev2.h b/arch/arm/mach-shmobile/include/mach/emev2.h
deleted file mode 100644
index fcb142a14e07..000000000000
--- a/arch/arm/mach-shmobile/include/mach/emev2.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#ifndef __ASM_EMEV2_H__
-#define __ASM_EMEV2_H__
-
-extern void emev2_map_io(void);
-extern void emev2_init_delay(void);
-extern void emev2_clock_init(void);
-extern struct smp_operations emev2_smp_ops;
-
-#endif /* __ASM_EMEV2_H__ */
diff --git a/arch/arm/mach-shmobile/include/mach/r8a7740.h b/arch/arm/mach-shmobile/include/mach/r8a7740.h
index d07932f872b6..5e3c9ec06303 100644
--- a/arch/arm/mach-shmobile/include/mach/r8a7740.h
+++ b/arch/arm/mach-shmobile/include/mach/r8a7740.h
@@ -47,7 +47,6 @@ enum {
};
extern void r8a7740_meram_workaround(void);
-extern void r8a7740_init_delay(void);
extern void r8a7740_init_irq_of(void);
extern void r8a7740_map_io(void);
extern void r8a7740_add_early_devices(void);
diff --git a/arch/arm/mach-shmobile/include/mach/r8a7791.h b/arch/arm/mach-shmobile/include/mach/r8a7791.h
index 200fa699f730..664274cc4b64 100644
--- a/arch/arm/mach-shmobile/include/mach/r8a7791.h
+++ b/arch/arm/mach-shmobile/include/mach/r8a7791.h
@@ -5,7 +5,6 @@ void r8a7791_add_standard_devices(void);
void r8a7791_add_dt_devices(void);
void r8a7791_clock_init(void);
void r8a7791_pinmux_init(void);
-void r8a7791_init_early(void);
extern struct smp_operations r8a7791_smp_ops;
#endif /* __ASM_R8A7791_H__ */
diff --git a/arch/arm/mach-shmobile/pm-rmobile.c b/arch/arm/mach-shmobile/pm-rmobile.c
index 1fc05d9453d0..f710235aff2f 100644
--- a/arch/arm/mach-shmobile/pm-rmobile.c
+++ b/arch/arm/mach-shmobile/pm-rmobile.c
@@ -99,39 +99,7 @@ static int rmobile_pd_power_up(struct generic_pm_domain *genpd)
static bool rmobile_pd_active_wakeup(struct device *dev)
{
- bool (*active_wakeup)(struct device *dev);
-
- active_wakeup = dev_gpd_data(dev)->ops.active_wakeup;
- return active_wakeup ? active_wakeup(dev) : true;
-}
-
-static int rmobile_pd_stop_dev(struct device *dev)
-{
- int (*stop)(struct device *dev);
-
- stop = dev_gpd_data(dev)->ops.stop;
- if (stop) {
- int ret = stop(dev);
- if (ret)
- return ret;
- }
- return pm_clk_suspend(dev);
-}
-
-static int rmobile_pd_start_dev(struct device *dev)
-{
- int (*start)(struct device *dev);
- int ret;
-
- ret = pm_clk_resume(dev);
- if (ret)
- return ret;
-
- start = dev_gpd_data(dev)->ops.start;
- if (start)
- ret = start(dev);
-
- return ret;
+ return true;
}
static void rmobile_init_pm_domain(struct rmobile_pm_domain *rmobile_pd)
@@ -140,8 +108,8 @@ static void rmobile_init_pm_domain(struct rmobile_pm_domain *rmobile_pd)
struct dev_power_governor *gov = rmobile_pd->gov;
pm_genpd_init(genpd, gov ? : &simple_qos_governor, false);
- genpd->dev_ops.stop = rmobile_pd_stop_dev;
- genpd->dev_ops.start = rmobile_pd_start_dev;
+ genpd->dev_ops.stop = pm_clk_suspend;
+ genpd->dev_ops.start = pm_clk_resume;
genpd->dev_ops.active_wakeup = rmobile_pd_active_wakeup;
genpd->dev_irq_safe = true;
genpd->power_off = rmobile_pd_power_down;
diff --git a/arch/arm/mach-shmobile/setup-emev2.c b/arch/arm/mach-shmobile/setup-emev2.c
index c71d667007b8..d953ff6e78a2 100644
--- a/arch/arm/mach-shmobile/setup-emev2.c
+++ b/arch/arm/mach-shmobile/setup-emev2.c
@@ -21,7 +21,6 @@
#include <linux/init.h>
#include <linux/of_platform.h>
#include <mach/common.h>
-#include <mach/emev2.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -38,23 +37,19 @@ static struct map_desc emev2_io_desc[] __initdata = {
#endif
};
-void __init emev2_map_io(void)
+static void __init emev2_map_io(void)
{
iotable_init(emev2_io_desc, ARRAY_SIZE(emev2_io_desc));
}
-void __init emev2_init_delay(void)
+static void __init emev2_init_delay(void)
{
shmobile_setup_delay(533, 1, 3); /* Cortex-A9 @ 533MHz */
}
static void __init emev2_add_standard_devices_dt(void)
{
-#ifdef CONFIG_COMMON_CLK
of_clk_init(NULL);
-#else
- emev2_clock_init();
-#endif
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
@@ -63,6 +58,8 @@ static const char *emev2_boards_compat_dt[] __initconst = {
NULL,
};
+extern struct smp_operations emev2_smp_ops;
+
DT_MACHINE_START(EMEV2_DT, "Generic Emma Mobile EV2 (Flattened Device Tree)")
.smp = smp_ops(emev2_smp_ops),
.map_io = emev2_map_io,
diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c
index a177a7b3bdbd..2dfd198fb635 100644
--- a/arch/arm/mach-shmobile/setup-r8a7740.c
+++ b/arch/arm/mach-shmobile/setup-r8a7740.c
@@ -876,11 +876,6 @@ void __init r8a7740_add_standard_devices_dt(void)
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
-void __init r8a7740_init_delay(void)
-{
- shmobile_setup_delay(800, 1, 3); /* Cortex-A9 @ 800MHz */
-};
-
void __init r8a7740_init_irq_of(void)
{
void __iomem *intc_prio_base = ioremap_nocache(0xe6900010, 0x10);
@@ -924,9 +919,10 @@ static const char *r8a7740_boards_compat_dt[] __initdata = {
DT_MACHINE_START(R8A7740_DT, "Generic R8A7740 (Flattened Device Tree)")
.map_io = r8a7740_map_io,
- .init_early = r8a7740_init_delay,
+ .init_early = shmobile_init_delay,
.init_irq = r8a7740_init_irq_of,
.init_machine = r8a7740_generic_init,
+ .init_late = shmobile_init_late,
.dt_compat = r8a7740_boards_compat_dt,
MACHINE_END
diff --git a/arch/arm/mach-shmobile/setup-r8a7790.c b/arch/arm/mach-shmobile/setup-r8a7790.c
index c4616f0698c6..a901d9ef53f6 100644
--- a/arch/arm/mach-shmobile/setup-r8a7790.c
+++ b/arch/arm/mach-shmobile/setup-r8a7790.c
@@ -185,12 +185,6 @@ void __init r8a7790_pinmux_init(void)
r8a7790_register_gpio(3);
r8a7790_register_gpio(4);
r8a7790_register_gpio(5);
- r8a7790_register_i2c(0);
- r8a7790_register_i2c(1);
- r8a7790_register_i2c(2);
- r8a7790_register_i2c(3);
- r8a7790_register_audio_dmac(0);
- r8a7790_register_audio_dmac(1);
}
#define __R8A7790_SCIF(scif_type, _scscr, index, baseaddr, irq) \
@@ -308,6 +302,12 @@ void __init r8a7790_add_standard_devices(void)
r8a7790_add_dt_devices();
r8a7790_register_irqc(0);
r8a7790_register_thermal();
+ r8a7790_register_i2c(0);
+ r8a7790_register_i2c(1);
+ r8a7790_register_i2c(2);
+ r8a7790_register_i2c(3);
+ r8a7790_register_audio_dmac(0);
+ r8a7790_register_audio_dmac(1);
}
void __init r8a7790_init_early(void)
diff --git a/arch/arm/mach-shmobile/setup-r8a7791.c b/arch/arm/mach-shmobile/setup-r8a7791.c
index e28404e43860..949580ae150a 100644
--- a/arch/arm/mach-shmobile/setup-r8a7791.c
+++ b/arch/arm/mach-shmobile/setup-r8a7791.c
@@ -210,13 +210,6 @@ void __init r8a7791_add_standard_devices(void)
r8a7791_register_thermal();
}
-void __init r8a7791_init_early(void)
-{
-#ifndef CONFIG_ARM_ARCH_TIMER
- shmobile_setup_delay(1300, 2, 4); /* Cortex-A15 @ 1300MHz */
-#endif
-}
-
#ifdef CONFIG_USE_OF
static const char *r8a7791_boards_compat_dt[] __initdata = {
"renesas,r8a7791",
@@ -225,7 +218,7 @@ static const char *r8a7791_boards_compat_dt[] __initdata = {
DT_MACHINE_START(R8A7791_DT, "Generic R8A7791 (Flattened Device Tree)")
.smp = smp_ops(r8a7791_smp_ops),
- .init_early = r8a7791_init_early,
+ .init_early = shmobile_init_delay,
.init_time = rcar_gen2_timer_init,
.dt_compat = r8a7791_boards_compat_dt,
MACHINE_END
diff --git a/arch/arm/mach-shmobile/setup-rcar-gen2.c b/arch/arm/mach-shmobile/setup-rcar-gen2.c
index 10604480f325..542c5a47173f 100644
--- a/arch/arm/mach-shmobile/setup-rcar-gen2.c
+++ b/arch/arm/mach-shmobile/setup-rcar-gen2.c
@@ -30,12 +30,16 @@
u32 rcar_gen2_read_mode_pins(void)
{
- void __iomem *modemr = ioremap_nocache(MODEMR, 4);
- u32 mode;
-
- BUG_ON(!modemr);
- mode = ioread32(modemr);
- iounmap(modemr);
+ static u32 mode;
+ static bool mode_valid;
+
+ if (!mode_valid) {
+ void __iomem *modemr = ioremap_nocache(MODEMR, 4);
+ BUG_ON(!modemr);
+ mode = ioread32(modemr);
+ iounmap(modemr);
+ mode_valid = true;
+ }
return mode;
}
diff --git a/arch/arm/mach-shmobile/smp-emev2.c b/arch/arm/mach-shmobile/smp-emev2.c
index f2ca92308f75..2dfd748da7f3 100644
--- a/arch/arm/mach-shmobile/smp-emev2.c
+++ b/arch/arm/mach-shmobile/smp-emev2.c
@@ -24,7 +24,6 @@
#include <linux/io.h>
#include <linux/delay.h>
#include <mach/common.h>
-#include <mach/emev2.h>
#include <asm/smp_plat.h>
#include <asm/smp_scu.h>
diff --git a/arch/arm/mach-shmobile/smp-r8a7791.c b/arch/arm/mach-shmobile/smp-r8a7791.c
index 2df5bd190fe4..ec979529f30f 100644
--- a/arch/arm/mach-shmobile/smp-r8a7791.c
+++ b/arch/arm/mach-shmobile/smp-r8a7791.c
@@ -20,6 +20,7 @@
#include <asm/smp_plat.h>
#include <mach/common.h>
#include <mach/r8a7791.h>
+#include <mach/rcar-gen2.h>
#define RST 0xe6160000
#define CA15BAR 0x0020
@@ -51,9 +52,21 @@ static void __init r8a7791_smp_prepare_cpus(unsigned int max_cpus)
iounmap(p);
}
+static int r8a7791_smp_boot_secondary(unsigned int cpu,
+ struct task_struct *idle)
+{
+ /* Error out when hardware debug mode is enabled */
+ if (rcar_gen2_read_mode_pins() & BIT(21)) {
+ pr_warn("Unable to boot CPU%u when MD21 is set\n", cpu);
+ return -ENOTSUPP;
+ }
+
+ return shmobile_smp_apmu_boot_secondary(cpu, idle);
+}
+
struct smp_operations r8a7791_smp_ops __initdata = {
.smp_prepare_cpus = r8a7791_smp_prepare_cpus,
- .smp_boot_secondary = shmobile_smp_apmu_boot_secondary,
+ .smp_boot_secondary = r8a7791_smp_boot_secondary,
#ifdef CONFIG_HOTPLUG_CPU
.cpu_disable = shmobile_smp_cpu_disable,
.cpu_die = shmobile_smp_apmu_cpu_die,
diff --git a/arch/arm/mach-shmobile/timer.c b/arch/arm/mach-shmobile/timer.c
index 62d7052d6f21..68bc0b82226d 100644
--- a/arch/arm/mach-shmobile/timer.c
+++ b/arch/arm/mach-shmobile/timer.c
@@ -21,6 +21,24 @@
#include <linux/platform_device.h>
#include <linux/clocksource.h>
#include <linux/delay.h>
+#include <linux/of_address.h>
+
+void __init shmobile_setup_delay_hz(unsigned int max_cpu_core_hz,
+ unsigned int mult, unsigned int div)
+{
+ /* calculate a worst-case loops-per-jiffy value
+ * based on maximum cpu core hz setting and the
+ * __delay() implementation in arch/arm/lib/delay.S
+ *
+ * this will result in a longer delay than expected
+ * when the cpu core runs on lower frequencies.
+ */
+
+ unsigned int value = HZ * div / mult;
+
+ if (!preset_lpj)
+ preset_lpj = max_cpu_core_hz / value;
+}
void __init shmobile_setup_delay(unsigned int max_cpu_core_mhz,
unsigned int mult, unsigned int div)
@@ -39,6 +57,33 @@ void __init shmobile_setup_delay(unsigned int max_cpu_core_mhz,
preset_lpj = max_cpu_core_mhz * value;
}
+void __init shmobile_init_delay(void)
+{
+ struct device_node *np, *parent;
+ u32 max_freq, freq;
+
+ max_freq = 0;
+
+ parent = of_find_node_by_path("/cpus");
+ if (parent) {
+ for_each_child_of_node(parent, np) {
+ if (!of_property_read_u32(np, "clock-frequency", &freq))
+ max_freq = max(max_freq, freq);
+ }
+ of_node_put(parent);
+ }
+
+ if (max_freq) {
+ if (of_find_compatible_node(NULL, NULL, "arm,cortex-a8"))
+ shmobile_setup_delay_hz(max_freq, 1, 3);
+ else if (of_find_compatible_node(NULL, NULL, "arm,cortex-a9"))
+ shmobile_setup_delay_hz(max_freq, 1, 3);
+ else if (of_find_compatible_node(NULL, NULL, "arm,cortex-a15"))
+ if (!IS_ENABLED(CONFIG_ARM_ARCH_TIMER))
+ shmobile_setup_delay_hz(max_freq, 2, 4);
+ }
+}
+
static void __init shmobile_late_time_init(void)
{
/*
diff --git a/arch/arm/mach-sti/board-dt.c b/arch/arm/mach-sti/board-dt.c
index 1217fb598cfd..df731f2322fa 100644
--- a/arch/arm/mach-sti/board-dt.c
+++ b/arch/arm/mach-sti/board-dt.c
@@ -36,6 +36,7 @@ static void __init stih41x_machine_init(void)
static const char *stih41x_dt_match[] __initdata = {
"st,stih415",
"st,stih416",
+ "st,stih407",
NULL
};
diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index b57d7d53b9d3..0fbd4f156bfa 100644
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -1,14 +1,38 @@
-config ARCH_SUNXI
- bool "Allwinner A1X SOCs" if ARCH_MULTI_V7
- select ARCH_HAS_RESET_CONTROLLER
+menuconfig ARCH_SUNXI
+ bool "Allwinner SoCs" if ARCH_MULTI_V7
select ARCH_REQUIRE_GPIOLIB
- select ARM_GIC
- select ARM_PSCI
select CLKSRC_MMIO
select GENERIC_IRQ_CHIP
- select HAVE_ARM_ARCH_TIMER
select PINCTRL
select PINCTRL_SUNXI
- select RESET_CONTROLLER
select SUN4I_TIMER
+
+if ARCH_SUNXI
+
+config MACH_SUN4I
+ bool "Allwinner A10 (sun4i) SoCs support"
+ default ARCH_SUNXI
+
+config MACH_SUN5I
+ bool "Allwinner A10s / A13 (sun5i) SoCs support"
+ default ARCH_SUNXI
+ select SUN5I_HSTIMER
+
+config MACH_SUN6I
+ bool "Allwinner A31 (sun6i) SoCs support"
+ default ARCH_SUNXI
+ select ARCH_HAS_RESET_CONTROLLER
+ select ARM_GIC
+ select MFD_SUN6I_PRCM
+ select RESET_CONTROLLER
+ select SUN5I_HSTIMER
+
+config MACH_SUN7I
+ bool "Allwinner A20 (sun7i) SoCs support"
+ default ARCH_SUNXI
+ select ARM_GIC
+ select ARM_PSCI
+ select HAVE_ARM_ARCH_TIMER
select SUN5I_HSTIMER
+
+endif
diff --git a/arch/arm/mach-sunxi/common.h b/arch/arm/mach-sunxi/common.h
deleted file mode 100644
index 9e5ac4756cbb..000000000000
--- a/arch/arm/mach-sunxi/common.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * Core functions for Allwinner SoCs
- *
- * Copyright (C) 2013 Maxime Ripard
- *
- * Maxime Ripard <maxime.ripard@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ARCH_SUNXI_COMMON_H_
-#define __ARCH_SUNXI_COMMON_H_
-
-void sun6i_secondary_startup(void);
-extern struct smp_operations sun6i_smp_ops;
-
-#endif /* __ARCH_SUNXI_COMMON_H_ */
diff --git a/arch/arm/mach-sunxi/platsmp.c b/arch/arm/mach-sunxi/platsmp.c
index 0c7dbce033cc..c53077bb8c3f 100644
--- a/arch/arm/mach-sunxi/platsmp.c
+++ b/arch/arm/mach-sunxi/platsmp.c
@@ -21,8 +21,6 @@
#include <linux/of_address.h>
#include <linux/smp.h>
-#include "common.h"
-
#define CPUCFG_CPU_PWR_CLAMP_STATUS_REG(cpu) ((cpu) * 0x40 + 0x64)
#define CPUCFG_CPU_RST_CTRL_REG(cpu) (((cpu) + 1) * 0x40)
#define CPUCFG_CPU_CTRL_REG(cpu) (((cpu) + 1) * 0x40 + 0x04)
@@ -122,3 +120,4 @@ struct smp_operations sun6i_smp_ops __initdata = {
.smp_prepare_cpus = sun6i_smp_prepare_cpus,
.smp_boot_secondary = sun6i_smp_boot_secondary,
};
+CPU_METHOD_OF_DECLARE(sun6i_smp, "allwinner,sun6i-a31", &sun6i_smp_ops);
diff --git a/arch/arm/mach-sunxi/sunxi.c b/arch/arm/mach-sunxi/sunxi.c
index 460b5a4962ef..3f9587bb51f6 100644
--- a/arch/arm/mach-sunxi/sunxi.c
+++ b/arch/arm/mach-sunxi/sunxi.c
@@ -12,111 +12,8 @@
#include <linux/clk-provider.h>
#include <linux/clocksource.h>
-#include <linux/delay.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-#include <linux/of_platform.h>
-#include <linux/io.h>
-#include <linux/reboot.h>
#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/system_misc.h>
-
-#include "common.h"
-
-#define SUN4I_WATCHDOG_CTRL_REG 0x00
-#define SUN4I_WATCHDOG_CTRL_RESTART BIT(0)
-#define SUN4I_WATCHDOG_MODE_REG 0x04
-#define SUN4I_WATCHDOG_MODE_ENABLE BIT(0)
-#define SUN4I_WATCHDOG_MODE_RESET_ENABLE BIT(1)
-
-#define SUN6I_WATCHDOG1_IRQ_REG 0x00
-#define SUN6I_WATCHDOG1_CTRL_REG 0x10
-#define SUN6I_WATCHDOG1_CTRL_RESTART BIT(0)
-#define SUN6I_WATCHDOG1_CONFIG_REG 0x14
-#define SUN6I_WATCHDOG1_CONFIG_RESTART BIT(0)
-#define SUN6I_WATCHDOG1_CONFIG_IRQ BIT(1)
-#define SUN6I_WATCHDOG1_MODE_REG 0x18
-#define SUN6I_WATCHDOG1_MODE_ENABLE BIT(0)
-
-static void __iomem *wdt_base;
-
-static void sun4i_restart(enum reboot_mode mode, const char *cmd)
-{
- if (!wdt_base)
- return;
-
- /* Enable timer and set reset bit in the watchdog */
- writel(SUN4I_WATCHDOG_MODE_ENABLE | SUN4I_WATCHDOG_MODE_RESET_ENABLE,
- wdt_base + SUN4I_WATCHDOG_MODE_REG);
-
- /*
- * Restart the watchdog. The default (and lowest) interval
- * value for the watchdog is 0.5s.
- */
- writel(SUN4I_WATCHDOG_CTRL_RESTART, wdt_base + SUN4I_WATCHDOG_CTRL_REG);
-
- while (1) {
- mdelay(5);
- writel(SUN4I_WATCHDOG_MODE_ENABLE | SUN4I_WATCHDOG_MODE_RESET_ENABLE,
- wdt_base + SUN4I_WATCHDOG_MODE_REG);
- }
-}
-
-static void sun6i_restart(enum reboot_mode mode, const char *cmd)
-{
- if (!wdt_base)
- return;
-
- /* Disable interrupts */
- writel(0, wdt_base + SUN6I_WATCHDOG1_IRQ_REG);
-
- /* We want to disable the IRQ and just reset the whole system */
- writel(SUN6I_WATCHDOG1_CONFIG_RESTART,
- wdt_base + SUN6I_WATCHDOG1_CONFIG_REG);
-
- /* Enable timer. The default and lowest interval value is 0.5s */
- writel(SUN6I_WATCHDOG1_MODE_ENABLE,
- wdt_base + SUN6I_WATCHDOG1_MODE_REG);
-
- /* Restart the watchdog. */
- writel(SUN6I_WATCHDOG1_CTRL_RESTART,
- wdt_base + SUN6I_WATCHDOG1_CTRL_REG);
-
- while (1) {
- mdelay(5);
- writel(SUN6I_WATCHDOG1_MODE_ENABLE,
- wdt_base + SUN6I_WATCHDOG1_MODE_REG);
- }
-}
-
-static struct of_device_id sunxi_restart_ids[] = {
- { .compatible = "allwinner,sun4i-a10-wdt" },
- { .compatible = "allwinner,sun6i-a31-wdt" },
- { /*sentinel*/ }
-};
-
-static void sunxi_setup_restart(void)
-{
- struct device_node *np;
-
- np = of_find_matching_node(NULL, sunxi_restart_ids);
- if (WARN(!np, "unable to setup watchdog restart"))
- return;
-
- wdt_base = of_iomap(np, 0);
- WARN(!wdt_base, "failed to map watchdog base address");
-}
-
-static void __init sunxi_dt_init(void)
-{
- sunxi_setup_restart();
-
- of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-}
static const char * const sunxi_board_dt_compat[] = {
"allwinner,sun4i-a10",
@@ -126,9 +23,7 @@ static const char * const sunxi_board_dt_compat[] = {
};
DT_MACHINE_START(SUNXI_DT, "Allwinner A1X (Device Tree)")
- .init_machine = sunxi_dt_init,
.dt_compat = sunxi_board_dt_compat,
- .restart = sun4i_restart,
MACHINE_END
static const char * const sun6i_board_dt_compat[] = {
@@ -140,16 +35,14 @@ extern void __init sun6i_reset_init(void);
static void __init sun6i_timer_init(void)
{
of_clk_init(NULL);
- sun6i_reset_init();
+ if (IS_ENABLED(CONFIG_RESET_CONTROLLER))
+ sun6i_reset_init();
clocksource_of_init();
}
DT_MACHINE_START(SUN6I_DT, "Allwinner sun6i (A31) Family")
- .init_machine = sunxi_dt_init,
.init_time = sun6i_timer_init,
.dt_compat = sun6i_board_dt_compat,
- .restart = sun6i_restart,
- .smp = smp_ops(sun6i_smp_ops),
MACHINE_END
static const char * const sun7i_board_dt_compat[] = {
@@ -158,7 +51,5 @@ static const char * const sun7i_board_dt_compat[] = {
};
DT_MACHINE_START(SUN7I_DT, "Allwinner sun7i (A20) Family")
- .init_machine = sunxi_dt_init,
.dt_compat = sun7i_board_dt_compat,
- .restart = sun4i_restart,
MACHINE_END
diff --git a/arch/arm/mach-tegra/pmc.c b/arch/arm/mach-tegra/pmc.c
index fb7920201ab4..7c7123e7557b 100644
--- a/arch/arm/mach-tegra/pmc.c
+++ b/arch/arm/mach-tegra/pmc.c
@@ -41,6 +41,14 @@
#define PMC_REMOVE_CLAMPING 0x34
#define PMC_PWRGATE_STATUS 0x38
+#define PMC_SCRATCH0 0x50
+#define PMC_SCRATCH0_MODE_RECOVERY (1 << 31)
+#define PMC_SCRATCH0_MODE_BOOTLOADER (1 << 30)
+#define PMC_SCRATCH0_MODE_RCM (1 << 1)
+#define PMC_SCRATCH0_MODE_MASK (PMC_SCRATCH0_MODE_RECOVERY | \
+ PMC_SCRATCH0_MODE_BOOTLOADER | \
+ PMC_SCRATCH0_MODE_RCM)
+
#define PMC_CPUPWRGOOD_TIMER 0xc8
#define PMC_CPUPWROFF_TIMER 0xcc
@@ -165,6 +173,22 @@ void tegra_pmc_restart(enum reboot_mode mode, const char *cmd)
{
u32 val;
+ val = tegra_pmc_readl(PMC_SCRATCH0);
+ val &= ~PMC_SCRATCH0_MODE_MASK;
+
+ if (cmd) {
+ if (strcmp(cmd, "recovery") == 0)
+ val |= PMC_SCRATCH0_MODE_RECOVERY;
+
+ if (strcmp(cmd, "bootloader") == 0)
+ val |= PMC_SCRATCH0_MODE_BOOTLOADER;
+
+ if (strcmp(cmd, "forced-recovery") == 0)
+ val |= PMC_SCRATCH0_MODE_RCM;
+ }
+
+ tegra_pmc_writel(val, PMC_SCRATCH0);
+
val = tegra_pmc_readl(0);
val |= 0x10;
tegra_pmc_writel(val, 0);
diff --git a/arch/arm/mach-zynq/Kconfig b/arch/arm/mach-zynq/Kconfig
index 58c2b844e0a3..573e0db1d0f0 100644
--- a/arch/arm/mach-zynq/Kconfig
+++ b/arch/arm/mach-zynq/Kconfig
@@ -1,14 +1,16 @@
config ARCH_ZYNQ
bool "Xilinx Zynq ARM Cortex A9 Platform" if ARCH_MULTI_V7
- select ARM_AMBA
- select ARM_GIC
select ARCH_HAS_CPUFREQ
select ARCH_HAS_OPP
+ select ARCH_SUPPORTS_BIG_ENDIAN
+ select ARM_AMBA
+ select ARM_GIC
+ select ARM_GLOBAL_TIMER if !CPU_FREQ
+ select CADENCE_TTC_TIMER
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
select ICST
- select CADENCE_TTC_TIMER
- select ARM_GLOBAL_TIMER if !CPU_FREQ
select MFD_SYSCON
+ select SOC_BUS
help
Support for Xilinx Zynq ARM Cortex A9 Platform
diff --git a/arch/arm/mach-zynq/common.c b/arch/arm/mach-zynq/common.c
index 6fcc584c1a11..edbd9d83f407 100644
--- a/arch/arm/mach-zynq/common.c
+++ b/arch/arm/mach-zynq/common.c
@@ -29,6 +29,8 @@
#include <linux/memblock.h>
#include <linux/irqchip.h>
#include <linux/irqchip/arm-gic.h>
+#include <linux/slab.h>
+#include <linux/sys_soc.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -37,10 +39,15 @@
#include <asm/page.h>
#include <asm/pgtable.h>
#include <asm/smp_scu.h>
+#include <asm/system_info.h>
#include <asm/hardware/cache-l2x0.h>
#include "common.h"
+#define ZYNQ_DEVCFG_MCTRL 0x80
+#define ZYNQ_DEVCFG_PS_VERSION_SHIFT 28
+#define ZYNQ_DEVCFG_PS_VERSION_MASK 0xF
+
void __iomem *zynq_scu_base;
/**
@@ -60,19 +67,81 @@ static struct platform_device zynq_cpuidle_device = {
};
/**
+ * zynq_get_revision - Get Zynq silicon revision
+ *
+ * Return: Silicon version or -1 otherwise
+ */
+static int __init zynq_get_revision(void)
+{
+ struct device_node *np;
+ void __iomem *zynq_devcfg_base;
+ u32 revision;
+
+ np = of_find_compatible_node(NULL, NULL, "xlnx,zynq-devcfg-1.0");
+ if (!np) {
+ pr_err("%s: no devcfg node found\n", __func__);
+ return -1;
+ }
+
+ zynq_devcfg_base = of_iomap(np, 0);
+ if (!zynq_devcfg_base) {
+ pr_err("%s: Unable to map I/O memory\n", __func__);
+ return -1;
+ }
+
+ revision = readl(zynq_devcfg_base + ZYNQ_DEVCFG_MCTRL);
+ revision >>= ZYNQ_DEVCFG_PS_VERSION_SHIFT;
+ revision &= ZYNQ_DEVCFG_PS_VERSION_MASK;
+
+ iounmap(zynq_devcfg_base);
+
+ return revision;
+}
+
+/**
* zynq_init_machine - System specific initialization, intended to be
* called from board specific initialization.
*/
static void __init zynq_init_machine(void)
{
struct platform_device_info devinfo = { .name = "cpufreq-cpu0", };
+ struct soc_device_attribute *soc_dev_attr;
+ struct soc_device *soc_dev;
+ struct device *parent = NULL;
/*
* 64KB way size, 8-way associativity, parity disabled
*/
l2x0_of_init(0x02060000, 0xF0F0FFFF);
- of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+ soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
+ if (!soc_dev_attr)
+ goto out;
+
+ system_rev = zynq_get_revision();
+
+ soc_dev_attr->family = kasprintf(GFP_KERNEL, "Xilinx Zynq");
+ soc_dev_attr->revision = kasprintf(GFP_KERNEL, "0x%x", system_rev);
+ soc_dev_attr->soc_id = kasprintf(GFP_KERNEL, "0x%x",
+ zynq_slcr_get_device_id());
+
+ soc_dev = soc_device_register(soc_dev_attr);
+ if (IS_ERR(soc_dev)) {
+ kfree(soc_dev_attr->family);
+ kfree(soc_dev_attr->revision);
+ kfree(soc_dev_attr->soc_id);
+ kfree(soc_dev_attr);
+ goto out;
+ }
+
+ parent = soc_device_to_device(soc_dev);
+
+out:
+ /*
+ * Finished with the static registrations now; fill in the missing
+ * devices
+ */
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, parent);
platform_device_register(&zynq_cpuidle_device);
platform_device_register_full(&devinfo);
diff --git a/arch/arm/mach-zynq/common.h b/arch/arm/mach-zynq/common.h
index b097844d3175..f652f0a884a6 100644
--- a/arch/arm/mach-zynq/common.h
+++ b/arch/arm/mach-zynq/common.h
@@ -24,6 +24,7 @@ extern int zynq_early_slcr_init(void);
extern void zynq_slcr_system_reset(void);
extern void zynq_slcr_cpu_stop(int cpu);
extern void zynq_slcr_cpu_start(int cpu);
+extern u32 zynq_slcr_get_device_id(void);
#ifdef CONFIG_SMP
extern void secondary_startup(void);
diff --git a/arch/arm/mach-zynq/headsmp.S b/arch/arm/mach-zynq/headsmp.S
index 57a32869f0aa..dd8c071941e7 100644
--- a/arch/arm/mach-zynq/headsmp.S
+++ b/arch/arm/mach-zynq/headsmp.S
@@ -8,9 +8,12 @@
*/
#include <linux/linkage.h>
#include <linux/init.h>
+#include <asm/assembler.h>
ENTRY(zynq_secondary_trampoline)
- ldr r0, [pc]
+ARM_BE8(setend be) @ ensure we are in BE8 mode
+ ldr r0, zynq_secondary_trampoline_jump
+ARM_BE8(rev r0, r0)
bx r0
.globl zynq_secondary_trampoline_jump
zynq_secondary_trampoline_jump:
diff --git a/arch/arm/mach-zynq/slcr.c b/arch/arm/mach-zynq/slcr.c
index a37d49a6e657..c43a2d16e223 100644
--- a/arch/arm/mach-zynq/slcr.c
+++ b/arch/arm/mach-zynq/slcr.c
@@ -26,10 +26,13 @@
#define SLCR_PS_RST_CTRL_OFFSET 0x200 /* PS Software Reset Control */
#define SLCR_A9_CPU_RST_CTRL_OFFSET 0x244 /* CPU Software Reset Control */
#define SLCR_REBOOT_STATUS_OFFSET 0x258 /* PS Reboot Status */
+#define SLCR_PSS_IDCODE 0x530 /* PS IDCODE */
#define SLCR_UNLOCK_MAGIC 0xDF0D
#define SLCR_A9_CPU_CLKSTOP 0x10
#define SLCR_A9_CPU_RST 0x1
+#define SLCR_PSS_IDCODE_DEVICE_SHIFT 12
+#define SLCR_PSS_IDCODE_DEVICE_MASK 0x1F
static void __iomem *zynq_slcr_base;
static struct regmap *zynq_slcr_regmap;
@@ -83,6 +86,22 @@ static inline int zynq_slcr_unlock(void)
}
/**
+ * zynq_slcr_get_device_id - Read device code id
+ *
+ * Return: Device code id
+ */
+u32 zynq_slcr_get_device_id(void)
+{
+ u32 val;
+
+ zynq_slcr_read(&val, SLCR_PSS_IDCODE);
+ val >>= SLCR_PSS_IDCODE_DEVICE_SHIFT;
+ val &= SLCR_PSS_IDCODE_DEVICE_MASK;
+
+ return val;
+}
+
+/**
* zynq_slcr_system_reset - Reset the entire system.
*/
void zynq_slcr_system_reset(void)
diff --git a/arch/arm/plat-orion/gpio.c b/arch/arm/plat-orion/gpio.c
index 6816192a7561..b61a3bcc2fa8 100644
--- a/arch/arm/plat-orion/gpio.c
+++ b/arch/arm/plat-orion/gpio.c
@@ -597,51 +597,3 @@ void __init orion_gpio_init(struct device_node *np,
orion_gpio_chip_count++;
}
-
-#ifdef CONFIG_OF
-static void __init orion_gpio_of_init_one(struct device_node *np,
- int irq_gpio_base)
-{
- int ngpio, gpio_base, mask_offset;
- void __iomem *base;
- int ret, i;
- int irqs[4];
- int secondary_irq_base;
-
- ret = of_property_read_u32(np, "ngpio", &ngpio);
- if (ret)
- goto out;
- ret = of_property_read_u32(np, "mask-offset", &mask_offset);
- if (ret == -EINVAL)
- mask_offset = 0;
- else
- goto out;
- base = of_iomap(np, 0);
- if (!base)
- goto out;
-
- secondary_irq_base = irq_gpio_base + (32 * orion_gpio_chip_count);
- gpio_base = 32 * orion_gpio_chip_count;
-
- /* Get the interrupt numbers. Each chip can have up to 4
- * interrupt handlers, with each handler dealing with 8 GPIO
- * pins. */
-
- for (i = 0; i < 4; i++)
- irqs[i] = irq_of_parse_and_map(np, i);
-
- orion_gpio_init(np, gpio_base, ngpio, base, mask_offset,
- secondary_irq_base, irqs);
- return;
-out:
- pr_err("%s: %s: missing mandatory property\n", __func__, np->name);
-}
-
-void __init orion_gpio_of_init(int irq_gpio_base)
-{
- struct device_node *np;
-
- for_each_compatible_node(np, NULL, "marvell,orion-gpio")
- orion_gpio_of_init_one(np, irq_gpio_base);
-}
-#endif
diff --git a/arch/arm/plat-orion/include/plat/irq.h b/arch/arm/plat-orion/include/plat/irq.h
index 50547e417936..96be19e9bd93 100644
--- a/arch/arm/plat-orion/include/plat/irq.h
+++ b/arch/arm/plat-orion/include/plat/irq.h
@@ -12,5 +12,4 @@
#define __PLAT_IRQ_H
void orion_irq_init(unsigned int irq_start, void __iomem *maskaddr);
-void __init orion_dt_init_irq(void);
#endif
diff --git a/arch/arm/plat-orion/include/plat/orion-gpio.h b/arch/arm/plat-orion/include/plat/orion-gpio.h
index 614dcac9dc52..e763988b04b9 100644
--- a/arch/arm/plat-orion/include/plat/orion-gpio.h
+++ b/arch/arm/plat-orion/include/plat/orion-gpio.h
@@ -33,5 +33,4 @@ void __init orion_gpio_init(struct device_node *np,
int secondary_irq_base,
int irq[4]);
-void __init orion_gpio_of_init(int irq_gpio_base);
#endif
diff --git a/arch/arm/plat-orion/irq.c b/arch/arm/plat-orion/irq.c
index 807df142444b..8c1fc06007c0 100644
--- a/arch/arm/plat-orion/irq.c
+++ b/arch/arm/plat-orion/irq.c
@@ -20,47 +20,6 @@
#include <plat/orion-gpio.h>
#include <mach/bridge-regs.h>
-#ifdef CONFIG_MULTI_IRQ_HANDLER
-/*
- * Compiling with both non-DT and DT support enabled, will
- * break asm irq handler used by non-DT boards. Therefore,
- * we provide a C-style irq handler even for non-DT boards,
- * if MULTI_IRQ_HANDLER is set.
- *
- * Notes:
- * - this is prepared for Kirkwood and Dove only, update
- * accordingly if you add Orion5x or MV78x00.
- * - Orion5x uses different macro names and has only one
- * set of CAUSE/MASK registers.
- * - MV78x00 uses the same macro names but has a third
- * set of CAUSE/MASK registers.
- *
- */
-
-static void __iomem *orion_irq_base = IRQ_VIRT_BASE;
-
-asmlinkage void
-__exception_irq_entry orion_legacy_handle_irq(struct pt_regs *regs)
-{
- u32 stat;
-
- stat = readl_relaxed(orion_irq_base + IRQ_CAUSE_LOW_OFF);
- stat &= readl_relaxed(orion_irq_base + IRQ_MASK_LOW_OFF);
- if (stat) {
- unsigned int hwirq = __fls(stat);
- handle_IRQ(hwirq, regs);
- return;
- }
- stat = readl_relaxed(orion_irq_base + IRQ_CAUSE_HIGH_OFF);
- stat &= readl_relaxed(orion_irq_base + IRQ_MASK_HIGH_OFF);
- if (stat) {
- unsigned int hwirq = 32 + __fls(stat);
- handle_IRQ(hwirq, regs);
- return;
- }
-}
-#endif
-
void __init orion_irq_init(unsigned int irq_start, void __iomem *maskaddr)
{
struct irq_chip_generic *gc;
@@ -78,40 +37,4 @@ void __init orion_irq_init(unsigned int irq_start, void __iomem *maskaddr)
ct->chip.irq_unmask = irq_gc_mask_set_bit;
irq_setup_generic_chip(gc, IRQ_MSK(32), IRQ_GC_INIT_MASK_CACHE,
IRQ_NOREQUEST, IRQ_LEVEL | IRQ_NOPROBE);
-
-#ifdef CONFIG_MULTI_IRQ_HANDLER
- set_handle_irq(orion_legacy_handle_irq);
-#endif
-}
-
-#ifdef CONFIG_OF
-static int __init orion_add_irq_domain(struct device_node *np,
- struct device_node *interrupt_parent)
-{
- int i = 0;
- void __iomem *base;
-
- do {
- base = of_iomap(np, i);
- if (base) {
- orion_irq_init(i * 32, base + 0x04);
- i++;
- }
- } while (base);
-
- irq_domain_add_legacy(np, i * 32, 0, 0,
- &irq_domain_simple_ops, NULL);
- return 0;
-}
-
-static const struct of_device_id orion_irq_match[] = {
- { .compatible = "marvell,orion-intc",
- .data = orion_add_irq_domain, },
- {},
-};
-
-void __init orion_dt_init_irq(void)
-{
- of_irq_init(orion_irq_match);
}
-#endif
diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile
index 25c826ed3b65..5e5beaa9ae15 100644
--- a/arch/arm/plat-samsung/Makefile
+++ b/arch/arm/plat-samsung/Makefile
@@ -4,6 +4,9 @@
#
# Licensed under GPLv2
+ccflags-$(CONFIG_ARCH_MULTI_V7) += -I$(srctree)/$(src)/include
+ccflags-$(CONFIG_ARCH_EXYNOS) += -I$(srctree)/arch/arm/mach-exynos/include
+
obj-y :=
obj-m :=
obj-n := dummy.o
diff --git a/drivers/bus/mvebu-mbus.c b/drivers/bus/mvebu-mbus.c
index 00b73448b22e..26c3779d871d 100644
--- a/drivers/bus/mvebu-mbus.c
+++ b/drivers/bus/mvebu-mbus.c
@@ -704,7 +704,6 @@ static int __init mvebu_mbus_common_init(struct mvebu_mbus_state *mbus,
phys_addr_t sdramwins_phys_base,
size_t sdramwins_size)
{
- struct device_node *np;
int win;
mbus->mbuswins_base = ioremap(mbuswins_phys_base, mbuswins_size);
@@ -717,12 +716,6 @@ static int __init mvebu_mbus_common_init(struct mvebu_mbus_state *mbus,
return -ENOMEM;
}
- np = of_find_compatible_node(NULL, NULL, "marvell,coherency-fabric");
- if (np) {
- mbus->hw_io_coherency = 1;
- of_node_put(np);
- }
-
for (win = 0; win < mbus->soc->num_wins; win++)
mvebu_mbus_disable_window(mbus, win);
@@ -892,7 +885,7 @@ static void __init mvebu_mbus_get_pcie_resources(struct device_node *np,
}
}
-int __init mvebu_mbus_dt_init(void)
+int __init mvebu_mbus_dt_init(bool is_coherent)
{
struct resource mbuswins_res, sdramwins_res;
struct device_node *np, *controller;
@@ -930,6 +923,8 @@ int __init mvebu_mbus_dt_init(void)
return -EINVAL;
}
+ mbus_state.hw_io_coherency = is_coherent;
+
/* Get optional pcie-{mem,io}-aperture properties */
mvebu_mbus_get_pcie_resources(np, &mbus_state.pcie_mem_aperture,
&mbus_state.pcie_io_aperture);
diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index 4fdfd6c70bd3..3a2196481b11 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -108,3 +108,5 @@ endmenu
source "drivers/clk/bcm/Kconfig"
source "drivers/clk/mvebu/Kconfig"
+
+source "drivers/clk/samsung/Kconfig"
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index 5f8a28735c96..17d7f13d19a5 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -41,7 +41,7 @@ obj-$(CONFIG_PLAT_ORION) += mvebu/
obj-$(CONFIG_ARCH_MXS) += mxs/
obj-$(CONFIG_COMMON_CLK_QCOM) += qcom/
obj-$(CONFIG_ARCH_ROCKCHIP) += rockchip/
-obj-$(CONFIG_PLAT_SAMSUNG) += samsung/
+obj-$(CONFIG_COMMON_CLK_SAMSUNG) += samsung/
obj-$(CONFIG_ARCH_SHMOBILE_MULTI) += shmobile/
obj-$(CONFIG_ARCH_SIRF) += sirf/
obj-$(CONFIG_ARCH_SOCFPGA) += socfpga/
diff --git a/drivers/clk/at91/Makefile b/drivers/clk/at91/Makefile
index 46c1d3d0d66b..4998aee59267 100644
--- a/drivers/clk/at91/Makefile
+++ b/drivers/clk/at91/Makefile
@@ -2,8 +2,8 @@
# Makefile for at91 specific clk
#
-obj-y += pmc.o
-obj-y += clk-main.o clk-pll.o clk-plldiv.o clk-master.o
+obj-y += pmc.o sckc.o
+obj-y += clk-slow.o clk-main.o clk-pll.o clk-plldiv.o clk-master.o
obj-y += clk-system.o clk-peripheral.o clk-programmable.o
obj-$(CONFIG_HAVE_AT91_UTMI) += clk-utmi.o
diff --git a/drivers/clk/at91/clk-main.c b/drivers/clk/at91/clk-main.c
index 8e9e8cc0412d..733306131b99 100644
--- a/drivers/clk/at91/clk-main.c
+++ b/drivers/clk/at91/clk-main.c
@@ -30,99 +30,546 @@
#define MAINF_LOOP_MIN_WAIT (USEC_PER_SEC / SLOW_CLOCK_FREQ)
#define MAINF_LOOP_MAX_WAIT MAINFRDY_TIMEOUT
-struct clk_main {
+#define MOR_KEY_MASK (0xff << 16)
+
+struct clk_main_osc {
struct clk_hw hw;
struct at91_pmc *pmc;
- unsigned long rate;
unsigned int irq;
wait_queue_head_t wait;
};
-#define to_clk_main(hw) container_of(hw, struct clk_main, hw)
+#define to_clk_main_osc(hw) container_of(hw, struct clk_main_osc, hw)
+
+struct clk_main_rc_osc {
+ struct clk_hw hw;
+ struct at91_pmc *pmc;
+ unsigned int irq;
+ wait_queue_head_t wait;
+ unsigned long frequency;
+ unsigned long accuracy;
+};
+
+#define to_clk_main_rc_osc(hw) container_of(hw, struct clk_main_rc_osc, hw)
+
+struct clk_rm9200_main {
+ struct clk_hw hw;
+ struct at91_pmc *pmc;
+};
+
+#define to_clk_rm9200_main(hw) container_of(hw, struct clk_rm9200_main, hw)
-static irqreturn_t clk_main_irq_handler(int irq, void *dev_id)
+struct clk_sam9x5_main {
+ struct clk_hw hw;
+ struct at91_pmc *pmc;
+ unsigned int irq;
+ wait_queue_head_t wait;
+ u8 parent;
+};
+
+#define to_clk_sam9x5_main(hw) container_of(hw, struct clk_sam9x5_main, hw)
+
+static irqreturn_t clk_main_osc_irq_handler(int irq, void *dev_id)
{
- struct clk_main *clkmain = (struct clk_main *)dev_id;
+ struct clk_main_osc *osc = dev_id;
- wake_up(&clkmain->wait);
- disable_irq_nosync(clkmain->irq);
+ wake_up(&osc->wait);
+ disable_irq_nosync(osc->irq);
return IRQ_HANDLED;
}
-static int clk_main_prepare(struct clk_hw *hw)
+static int clk_main_osc_prepare(struct clk_hw *hw)
{
- struct clk_main *clkmain = to_clk_main(hw);
- struct at91_pmc *pmc = clkmain->pmc;
- unsigned long halt_time, timeout;
+ struct clk_main_osc *osc = to_clk_main_osc(hw);
+ struct at91_pmc *pmc = osc->pmc;
u32 tmp;
+ tmp = pmc_read(pmc, AT91_CKGR_MOR) & ~MOR_KEY_MASK;
+ if (tmp & AT91_PMC_OSCBYPASS)
+ return 0;
+
+ if (!(tmp & AT91_PMC_MOSCEN)) {
+ tmp |= AT91_PMC_MOSCEN | AT91_PMC_KEY;
+ pmc_write(pmc, AT91_CKGR_MOR, tmp);
+ }
+
while (!(pmc_read(pmc, AT91_PMC_SR) & AT91_PMC_MOSCS)) {
- enable_irq(clkmain->irq);
- wait_event(clkmain->wait,
+ enable_irq(osc->irq);
+ wait_event(osc->wait,
pmc_read(pmc, AT91_PMC_SR) & AT91_PMC_MOSCS);
}
- if (clkmain->rate)
- return 0;
+ return 0;
+}
+
+static void clk_main_osc_unprepare(struct clk_hw *hw)
+{
+ struct clk_main_osc *osc = to_clk_main_osc(hw);
+ struct at91_pmc *pmc = osc->pmc;
+ u32 tmp = pmc_read(pmc, AT91_CKGR_MOR);
+
+ if (tmp & AT91_PMC_OSCBYPASS)
+ return;
+
+ if (!(tmp & AT91_PMC_MOSCEN))
+ return;
+
+ tmp &= ~(AT91_PMC_KEY | AT91_PMC_MOSCEN);
+ pmc_write(pmc, AT91_CKGR_MOR, tmp | AT91_PMC_KEY);
+}
+
+static int clk_main_osc_is_prepared(struct clk_hw *hw)
+{
+ struct clk_main_osc *osc = to_clk_main_osc(hw);
+ struct at91_pmc *pmc = osc->pmc;
+ u32 tmp = pmc_read(pmc, AT91_CKGR_MOR);
+
+ if (tmp & AT91_PMC_OSCBYPASS)
+ return 1;
+
+ return !!((pmc_read(pmc, AT91_PMC_SR) & AT91_PMC_MOSCS) &&
+ (pmc_read(pmc, AT91_CKGR_MOR) & AT91_PMC_MOSCEN));
+}
+
+static const struct clk_ops main_osc_ops = {
+ .prepare = clk_main_osc_prepare,
+ .unprepare = clk_main_osc_unprepare,
+ .is_prepared = clk_main_osc_is_prepared,
+};
+
+static struct clk * __init
+at91_clk_register_main_osc(struct at91_pmc *pmc,
+ unsigned int irq,
+ const char *name,
+ const char *parent_name,
+ bool bypass)
+{
+ int ret;
+ struct clk_main_osc *osc;
+ struct clk *clk = NULL;
+ struct clk_init_data init;
+
+ if (!pmc || !irq || !name || !parent_name)
+ return ERR_PTR(-EINVAL);
+
+ osc = kzalloc(sizeof(*osc), GFP_KERNEL);
+ if (!osc)
+ return ERR_PTR(-ENOMEM);
+
+ init.name = name;
+ init.ops = &main_osc_ops;
+ init.parent_names = &parent_name;
+ init.num_parents = 1;
+ init.flags = CLK_IGNORE_UNUSED;
+
+ osc->hw.init = &init;
+ osc->pmc = pmc;
+ osc->irq = irq;
+
+ init_waitqueue_head(&osc->wait);
+ irq_set_status_flags(osc->irq, IRQ_NOAUTOEN);
+ ret = request_irq(osc->irq, clk_main_osc_irq_handler,
+ IRQF_TRIGGER_HIGH, name, osc);
+ if (ret)
+ return ERR_PTR(ret);
+
+ if (bypass)
+ pmc_write(pmc, AT91_CKGR_MOR,
+ (pmc_read(pmc, AT91_CKGR_MOR) &
+ ~(MOR_KEY_MASK | AT91_PMC_MOSCEN)) |
+ AT91_PMC_OSCBYPASS | AT91_PMC_KEY);
+
+ clk = clk_register(NULL, &osc->hw);
+ if (IS_ERR(clk)) {
+ free_irq(irq, osc);
+ kfree(osc);
+ }
+
+ return clk;
+}
+
+void __init of_at91rm9200_clk_main_osc_setup(struct device_node *np,
+ struct at91_pmc *pmc)
+{
+ struct clk *clk;
+ unsigned int irq;
+ const char *name = np->name;
+ const char *parent_name;
+ bool bypass;
+
+ of_property_read_string(np, "clock-output-names", &name);
+ bypass = of_property_read_bool(np, "atmel,osc-bypass");
+ parent_name = of_clk_get_parent_name(np, 0);
+
+ irq = irq_of_parse_and_map(np, 0);
+ if (!irq)
+ return;
+
+ clk = at91_clk_register_main_osc(pmc, irq, name, parent_name, bypass);
+ if (IS_ERR(clk))
+ return;
+
+ of_clk_add_provider(np, of_clk_src_simple_get, clk);
+}
+
+static irqreturn_t clk_main_rc_osc_irq_handler(int irq, void *dev_id)
+{
+ struct clk_main_rc_osc *osc = dev_id;
+
+ wake_up(&osc->wait);
+ disable_irq_nosync(osc->irq);
+
+ return IRQ_HANDLED;
+}
+
+static int clk_main_rc_osc_prepare(struct clk_hw *hw)
+{
+ struct clk_main_rc_osc *osc = to_clk_main_rc_osc(hw);
+ struct at91_pmc *pmc = osc->pmc;
+ u32 tmp;
+
+ tmp = pmc_read(pmc, AT91_CKGR_MOR) & ~MOR_KEY_MASK;
+
+ if (!(tmp & AT91_PMC_MOSCRCEN)) {
+ tmp |= AT91_PMC_MOSCRCEN | AT91_PMC_KEY;
+ pmc_write(pmc, AT91_CKGR_MOR, tmp);
+ }
+
+ while (!(pmc_read(pmc, AT91_PMC_SR) & AT91_PMC_MOSCRCS)) {
+ enable_irq(osc->irq);
+ wait_event(osc->wait,
+ pmc_read(pmc, AT91_PMC_SR) & AT91_PMC_MOSCRCS);
+ }
+
+ return 0;
+}
+
+static void clk_main_rc_osc_unprepare(struct clk_hw *hw)
+{
+ struct clk_main_rc_osc *osc = to_clk_main_rc_osc(hw);
+ struct at91_pmc *pmc = osc->pmc;
+ u32 tmp = pmc_read(pmc, AT91_CKGR_MOR);
+
+ if (!(tmp & AT91_PMC_MOSCRCEN))
+ return;
+
+ tmp &= ~(MOR_KEY_MASK | AT91_PMC_MOSCRCEN);
+ pmc_write(pmc, AT91_CKGR_MOR, tmp | AT91_PMC_KEY);
+}
+
+static int clk_main_rc_osc_is_prepared(struct clk_hw *hw)
+{
+ struct clk_main_rc_osc *osc = to_clk_main_rc_osc(hw);
+ struct at91_pmc *pmc = osc->pmc;
+
+ return !!((pmc_read(pmc, AT91_PMC_SR) & AT91_PMC_MOSCRCS) &&
+ (pmc_read(pmc, AT91_CKGR_MOR) & AT91_PMC_MOSCRCEN));
+}
+
+static unsigned long clk_main_rc_osc_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct clk_main_rc_osc *osc = to_clk_main_rc_osc(hw);
+
+ return osc->frequency;
+}
+
+static unsigned long clk_main_rc_osc_recalc_accuracy(struct clk_hw *hw,
+ unsigned long parent_acc)
+{
+ struct clk_main_rc_osc *osc = to_clk_main_rc_osc(hw);
+
+ return osc->accuracy;
+}
+
+static const struct clk_ops main_rc_osc_ops = {
+ .prepare = clk_main_rc_osc_prepare,
+ .unprepare = clk_main_rc_osc_unprepare,
+ .is_prepared = clk_main_rc_osc_is_prepared,
+ .recalc_rate = clk_main_rc_osc_recalc_rate,
+ .recalc_accuracy = clk_main_rc_osc_recalc_accuracy,
+};
+
+static struct clk * __init
+at91_clk_register_main_rc_osc(struct at91_pmc *pmc,
+ unsigned int irq,
+ const char *name,
+ u32 frequency, u32 accuracy)
+{
+ int ret;
+ struct clk_main_rc_osc *osc;
+ struct clk *clk = NULL;
+ struct clk_init_data init;
+
+ if (!pmc || !irq || !name || !frequency)
+ return ERR_PTR(-EINVAL);
+
+ osc = kzalloc(sizeof(*osc), GFP_KERNEL);
+ if (!osc)
+ return ERR_PTR(-ENOMEM);
+
+ init.name = name;
+ init.ops = &main_rc_osc_ops;
+ init.parent_names = NULL;
+ init.num_parents = 0;
+ init.flags = CLK_IS_ROOT | CLK_IGNORE_UNUSED;
+
+ osc->hw.init = &init;
+ osc->pmc = pmc;
+ osc->irq = irq;
+ osc->frequency = frequency;
+ osc->accuracy = accuracy;
+
+ init_waitqueue_head(&osc->wait);
+ irq_set_status_flags(osc->irq, IRQ_NOAUTOEN);
+ ret = request_irq(osc->irq, clk_main_rc_osc_irq_handler,
+ IRQF_TRIGGER_HIGH, name, osc);
+ if (ret)
+ return ERR_PTR(ret);
+
+ clk = clk_register(NULL, &osc->hw);
+ if (IS_ERR(clk)) {
+ free_irq(irq, osc);
+ kfree(osc);
+ }
+
+ return clk;
+}
+
+void __init of_at91sam9x5_clk_main_rc_osc_setup(struct device_node *np,
+ struct at91_pmc *pmc)
+{
+ struct clk *clk;
+ unsigned int irq;
+ u32 frequency = 0;
+ u32 accuracy = 0;
+ const char *name = np->name;
+
+ of_property_read_string(np, "clock-output-names", &name);
+ of_property_read_u32(np, "clock-frequency", &frequency);
+ of_property_read_u32(np, "clock-accuracy", &accuracy);
+
+ irq = irq_of_parse_and_map(np, 0);
+ if (!irq)
+ return;
+
+ clk = at91_clk_register_main_rc_osc(pmc, irq, name, frequency,
+ accuracy);
+ if (IS_ERR(clk))
+ return;
+
+ of_clk_add_provider(np, of_clk_src_simple_get, clk);
+}
+
+
+static int clk_main_probe_frequency(struct at91_pmc *pmc)
+{
+ unsigned long prep_time, timeout;
+ u32 tmp;
timeout = jiffies + usecs_to_jiffies(MAINFRDY_TIMEOUT);
do {
- halt_time = jiffies;
+ prep_time = jiffies;
tmp = pmc_read(pmc, AT91_CKGR_MCFR);
if (tmp & AT91_PMC_MAINRDY)
return 0;
usleep_range(MAINF_LOOP_MIN_WAIT, MAINF_LOOP_MAX_WAIT);
- } while (time_before(halt_time, timeout));
+ } while (time_before(prep_time, timeout));
- return 0;
+ return -ETIMEDOUT;
}
-static int clk_main_is_prepared(struct clk_hw *hw)
+static unsigned long clk_main_recalc_rate(struct at91_pmc *pmc,
+ unsigned long parent_rate)
{
- struct clk_main *clkmain = to_clk_main(hw);
+ u32 tmp;
+
+ if (parent_rate)
+ return parent_rate;
+
+ tmp = pmc_read(pmc, AT91_CKGR_MCFR);
+ if (!(tmp & AT91_PMC_MAINRDY))
+ return 0;
- return !!(pmc_read(clkmain->pmc, AT91_PMC_SR) & AT91_PMC_MOSCS);
+ return ((tmp & AT91_PMC_MAINF) * SLOW_CLOCK_FREQ) / MAINF_DIV;
}
-static unsigned long clk_main_recalc_rate(struct clk_hw *hw,
- unsigned long parent_rate)
+static int clk_rm9200_main_prepare(struct clk_hw *hw)
{
- u32 tmp;
- struct clk_main *clkmain = to_clk_main(hw);
+ struct clk_rm9200_main *clkmain = to_clk_rm9200_main(hw);
+
+ return clk_main_probe_frequency(clkmain->pmc);
+}
+
+static int clk_rm9200_main_is_prepared(struct clk_hw *hw)
+{
+ struct clk_rm9200_main *clkmain = to_clk_rm9200_main(hw);
+
+ return !!(pmc_read(clkmain->pmc, AT91_CKGR_MCFR) & AT91_PMC_MAINRDY);
+}
+
+static unsigned long clk_rm9200_main_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct clk_rm9200_main *clkmain = to_clk_rm9200_main(hw);
+
+ return clk_main_recalc_rate(clkmain->pmc, parent_rate);
+}
+
+static const struct clk_ops rm9200_main_ops = {
+ .prepare = clk_rm9200_main_prepare,
+ .is_prepared = clk_rm9200_main_is_prepared,
+ .recalc_rate = clk_rm9200_main_recalc_rate,
+};
+
+static struct clk * __init
+at91_clk_register_rm9200_main(struct at91_pmc *pmc,
+ const char *name,
+ const char *parent_name)
+{
+ struct clk_rm9200_main *clkmain;
+ struct clk *clk = NULL;
+ struct clk_init_data init;
+
+ if (!pmc || !name)
+ return ERR_PTR(-EINVAL);
+
+ if (!parent_name)
+ return ERR_PTR(-EINVAL);
+
+ clkmain = kzalloc(sizeof(*clkmain), GFP_KERNEL);
+ if (!clkmain)
+ return ERR_PTR(-ENOMEM);
+
+ init.name = name;
+ init.ops = &rm9200_main_ops;
+ init.parent_names = &parent_name;
+ init.num_parents = 1;
+ init.flags = 0;
+
+ clkmain->hw.init = &init;
+ clkmain->pmc = pmc;
+
+ clk = clk_register(NULL, &clkmain->hw);
+ if (IS_ERR(clk))
+ kfree(clkmain);
+
+ return clk;
+}
+
+void __init of_at91rm9200_clk_main_setup(struct device_node *np,
+ struct at91_pmc *pmc)
+{
+ struct clk *clk;
+ const char *parent_name;
+ const char *name = np->name;
+
+ parent_name = of_clk_get_parent_name(np, 0);
+ of_property_read_string(np, "clock-output-names", &name);
+
+ clk = at91_clk_register_rm9200_main(pmc, name, parent_name);
+ if (IS_ERR(clk))
+ return;
+
+ of_clk_add_provider(np, of_clk_src_simple_get, clk);
+}
+
+static irqreturn_t clk_sam9x5_main_irq_handler(int irq, void *dev_id)
+{
+ struct clk_sam9x5_main *clkmain = dev_id;
+
+ wake_up(&clkmain->wait);
+ disable_irq_nosync(clkmain->irq);
+
+ return IRQ_HANDLED;
+}
+
+static int clk_sam9x5_main_prepare(struct clk_hw *hw)
+{
+ struct clk_sam9x5_main *clkmain = to_clk_sam9x5_main(hw);
struct at91_pmc *pmc = clkmain->pmc;
- if (clkmain->rate)
- return clkmain->rate;
+ while (!(pmc_read(pmc, AT91_PMC_SR) & AT91_PMC_MOSCSELS)) {
+ enable_irq(clkmain->irq);
+ wait_event(clkmain->wait,
+ pmc_read(pmc, AT91_PMC_SR) & AT91_PMC_MOSCSELS);
+ }
+
+ return clk_main_probe_frequency(pmc);
+}
- tmp = pmc_read(pmc, AT91_CKGR_MCFR) & AT91_PMC_MAINF;
- clkmain->rate = (tmp * parent_rate) / MAINF_DIV;
+static int clk_sam9x5_main_is_prepared(struct clk_hw *hw)
+{
+ struct clk_sam9x5_main *clkmain = to_clk_sam9x5_main(hw);
- return clkmain->rate;
+ return !!(pmc_read(clkmain->pmc, AT91_PMC_SR) & AT91_PMC_MOSCSELS);
}
-static const struct clk_ops main_ops = {
- .prepare = clk_main_prepare,
- .is_prepared = clk_main_is_prepared,
- .recalc_rate = clk_main_recalc_rate,
+static unsigned long clk_sam9x5_main_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct clk_sam9x5_main *clkmain = to_clk_sam9x5_main(hw);
+
+ return clk_main_recalc_rate(clkmain->pmc, parent_rate);
+}
+
+static int clk_sam9x5_main_set_parent(struct clk_hw *hw, u8 index)
+{
+ struct clk_sam9x5_main *clkmain = to_clk_sam9x5_main(hw);
+ struct at91_pmc *pmc = clkmain->pmc;
+ u32 tmp;
+
+ if (index > 1)
+ return -EINVAL;
+
+ tmp = pmc_read(pmc, AT91_CKGR_MOR) & ~MOR_KEY_MASK;
+
+ if (index && !(tmp & AT91_PMC_MOSCSEL))
+ pmc_write(pmc, AT91_CKGR_MOR, tmp | AT91_PMC_MOSCSEL);
+ else if (!index && (tmp & AT91_PMC_MOSCSEL))
+ pmc_write(pmc, AT91_CKGR_MOR, tmp & ~AT91_PMC_MOSCSEL);
+
+ while (!(pmc_read(pmc, AT91_PMC_SR) & AT91_PMC_MOSCSELS)) {
+ enable_irq(clkmain->irq);
+ wait_event(clkmain->wait,
+ pmc_read(pmc, AT91_PMC_SR) & AT91_PMC_MOSCSELS);
+ }
+
+ return 0;
+}
+
+static u8 clk_sam9x5_main_get_parent(struct clk_hw *hw)
+{
+ struct clk_sam9x5_main *clkmain = to_clk_sam9x5_main(hw);
+
+ return !!(pmc_read(clkmain->pmc, AT91_CKGR_MOR) & AT91_PMC_MOSCEN);
+}
+
+static const struct clk_ops sam9x5_main_ops = {
+ .prepare = clk_sam9x5_main_prepare,
+ .is_prepared = clk_sam9x5_main_is_prepared,
+ .recalc_rate = clk_sam9x5_main_recalc_rate,
+ .set_parent = clk_sam9x5_main_set_parent,
+ .get_parent = clk_sam9x5_main_get_parent,
};
static struct clk * __init
-at91_clk_register_main(struct at91_pmc *pmc,
- unsigned int irq,
- const char *name,
- const char *parent_name,
- unsigned long rate)
+at91_clk_register_sam9x5_main(struct at91_pmc *pmc,
+ unsigned int irq,
+ const char *name,
+ const char **parent_names,
+ int num_parents)
{
int ret;
- struct clk_main *clkmain;
+ struct clk_sam9x5_main *clkmain;
struct clk *clk = NULL;
struct clk_init_data init;
if (!pmc || !irq || !name)
return ERR_PTR(-EINVAL);
- if (!rate && !parent_name)
+ if (!parent_names || !num_parents)
return ERR_PTR(-EINVAL);
clkmain = kzalloc(sizeof(*clkmain), GFP_KERNEL);
@@ -130,19 +577,20 @@ at91_clk_register_main(struct at91_pmc *pmc,
return ERR_PTR(-ENOMEM);
init.name = name;
- init.ops = &main_ops;
- init.parent_names = parent_name ? &parent_name : NULL;
- init.num_parents = parent_name ? 1 : 0;
- init.flags = parent_name ? 0 : CLK_IS_ROOT;
+ init.ops = &sam9x5_main_ops;
+ init.parent_names = parent_names;
+ init.num_parents = num_parents;
+ init.flags = CLK_SET_PARENT_GATE;
clkmain->hw.init = &init;
- clkmain->rate = rate;
clkmain->pmc = pmc;
clkmain->irq = irq;
+ clkmain->parent = !!(pmc_read(clkmain->pmc, AT91_CKGR_MOR) &
+ AT91_PMC_MOSCEN);
init_waitqueue_head(&clkmain->wait);
irq_set_status_flags(clkmain->irq, IRQ_NOAUTOEN);
- ret = request_irq(clkmain->irq, clk_main_irq_handler,
- IRQF_TRIGGER_HIGH, "clk-main", clkmain);
+ ret = request_irq(clkmain->irq, clk_sam9x5_main_irq_handler,
+ IRQF_TRIGGER_HIGH, name, clkmain);
if (ret)
return ERR_PTR(ret);
@@ -155,33 +603,36 @@ at91_clk_register_main(struct at91_pmc *pmc,
return clk;
}
-
-
-static void __init
-of_at91_clk_main_setup(struct device_node *np, struct at91_pmc *pmc)
+void __init of_at91sam9x5_clk_main_setup(struct device_node *np,
+ struct at91_pmc *pmc)
{
struct clk *clk;
+ const char *parent_names[2];
+ int num_parents;
unsigned int irq;
- const char *parent_name;
const char *name = np->name;
- u32 rate = 0;
+ int i;
+
+ num_parents = of_count_phandle_with_args(np, "clocks", "#clock-cells");
+ if (num_parents <= 0 || num_parents > 2)
+ return;
+
+ for (i = 0; i < num_parents; ++i) {
+ parent_names[i] = of_clk_get_parent_name(np, i);
+ if (!parent_names[i])
+ return;
+ }
- parent_name = of_clk_get_parent_name(np, 0);
of_property_read_string(np, "clock-output-names", &name);
- of_property_read_u32(np, "clock-frequency", &rate);
+
irq = irq_of_parse_and_map(np, 0);
if (!irq)
return;
- clk = at91_clk_register_main(pmc, irq, name, parent_name, rate);
+ clk = at91_clk_register_sam9x5_main(pmc, irq, name, parent_names,
+ num_parents);
if (IS_ERR(clk))
return;
of_clk_add_provider(np, of_clk_src_simple_get, clk);
}
-
-void __init of_at91rm9200_clk_main_setup(struct device_node *np,
- struct at91_pmc *pmc)
-{
- of_at91_clk_main_setup(np, pmc);
-}
diff --git a/drivers/clk/at91/clk-slow.c b/drivers/clk/at91/clk-slow.c
new file mode 100644
index 000000000000..0300c46ee247
--- /dev/null
+++ b/drivers/clk/at91/clk-slow.c
@@ -0,0 +1,467 @@
+/*
+ * drivers/clk/at91/clk-slow.c
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#include <linux/clk/at91_pmc.h>
+#include <linux/delay.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/sched.h>
+#include <linux/wait.h>
+
+#include "pmc.h"
+#include "sckc.h"
+
+#define SLOW_CLOCK_FREQ 32768
+#define SLOWCK_SW_CYCLES 5
+#define SLOWCK_SW_TIME_USEC ((SLOWCK_SW_CYCLES * USEC_PER_SEC) / \
+ SLOW_CLOCK_FREQ)
+
+#define AT91_SCKC_CR 0x00
+#define AT91_SCKC_RCEN (1 << 0)
+#define AT91_SCKC_OSC32EN (1 << 1)
+#define AT91_SCKC_OSC32BYP (1 << 2)
+#define AT91_SCKC_OSCSEL (1 << 3)
+
+struct clk_slow_osc {
+ struct clk_hw hw;
+ void __iomem *sckcr;
+ unsigned long startup_usec;
+};
+
+#define to_clk_slow_osc(hw) container_of(hw, struct clk_slow_osc, hw)
+
+struct clk_slow_rc_osc {
+ struct clk_hw hw;
+ void __iomem *sckcr;
+ unsigned long frequency;
+ unsigned long accuracy;
+ unsigned long startup_usec;
+};
+
+#define to_clk_slow_rc_osc(hw) container_of(hw, struct clk_slow_rc_osc, hw)
+
+struct clk_sam9260_slow {
+ struct clk_hw hw;
+ struct at91_pmc *pmc;
+};
+
+#define to_clk_sam9260_slow(hw) container_of(hw, struct clk_sam9260_slow, hw)
+
+struct clk_sam9x5_slow {
+ struct clk_hw hw;
+ void __iomem *sckcr;
+ u8 parent;
+};
+
+#define to_clk_sam9x5_slow(hw) container_of(hw, struct clk_sam9x5_slow, hw)
+
+
+static int clk_slow_osc_prepare(struct clk_hw *hw)
+{
+ struct clk_slow_osc *osc = to_clk_slow_osc(hw);
+ void __iomem *sckcr = osc->sckcr;
+ u32 tmp = readl(sckcr);
+
+ if (tmp & AT91_SCKC_OSC32BYP)
+ return 0;
+
+ writel(tmp | AT91_SCKC_OSC32EN, sckcr);
+
+ usleep_range(osc->startup_usec, osc->startup_usec + 1);
+
+ return 0;
+}
+
+static void clk_slow_osc_unprepare(struct clk_hw *hw)
+{
+ struct clk_slow_osc *osc = to_clk_slow_osc(hw);
+ void __iomem *sckcr = osc->sckcr;
+ u32 tmp = readl(sckcr);
+
+ if (tmp & AT91_SCKC_OSC32BYP)
+ return;
+
+ writel(tmp & ~AT91_SCKC_OSC32EN, sckcr);
+}
+
+static int clk_slow_osc_is_prepared(struct clk_hw *hw)
+{
+ struct clk_slow_osc *osc = to_clk_slow_osc(hw);
+ void __iomem *sckcr = osc->sckcr;
+ u32 tmp = readl(sckcr);
+
+ if (tmp & AT91_SCKC_OSC32BYP)
+ return 1;
+
+ return !!(tmp & AT91_SCKC_OSC32EN);
+}
+
+static const struct clk_ops slow_osc_ops = {
+ .prepare = clk_slow_osc_prepare,
+ .unprepare = clk_slow_osc_unprepare,
+ .is_prepared = clk_slow_osc_is_prepared,
+};
+
+static struct clk * __init
+at91_clk_register_slow_osc(void __iomem *sckcr,
+ const char *name,
+ const char *parent_name,
+ unsigned long startup,
+ bool bypass)
+{
+ struct clk_slow_osc *osc;
+ struct clk *clk = NULL;
+ struct clk_init_data init;
+
+ if (!sckcr || !name || !parent_name)
+ return ERR_PTR(-EINVAL);
+
+ osc = kzalloc(sizeof(*osc), GFP_KERNEL);
+ if (!osc)
+ return ERR_PTR(-ENOMEM);
+
+ init.name = name;
+ init.ops = &slow_osc_ops;
+ init.parent_names = &parent_name;
+ init.num_parents = 1;
+ init.flags = CLK_IGNORE_UNUSED;
+
+ osc->hw.init = &init;
+ osc->sckcr = sckcr;
+ osc->startup_usec = startup;
+
+ if (bypass)
+ writel((readl(sckcr) & ~AT91_SCKC_OSC32EN) | AT91_SCKC_OSC32BYP,
+ sckcr);
+
+ clk = clk_register(NULL, &osc->hw);
+ if (IS_ERR(clk))
+ kfree(osc);
+
+ return clk;
+}
+
+void __init of_at91sam9x5_clk_slow_osc_setup(struct device_node *np,
+ void __iomem *sckcr)
+{
+ struct clk *clk;
+ const char *parent_name;
+ const char *name = np->name;
+ u32 startup;
+ bool bypass;
+
+ parent_name = of_clk_get_parent_name(np, 0);
+ of_property_read_string(np, "clock-output-names", &name);
+ of_property_read_u32(np, "atmel,startup-time-usec", &startup);
+ bypass = of_property_read_bool(np, "atmel,osc-bypass");
+
+ clk = at91_clk_register_slow_osc(sckcr, name, parent_name, startup,
+ bypass);
+ if (IS_ERR(clk))
+ return;
+
+ of_clk_add_provider(np, of_clk_src_simple_get, clk);
+}
+
+static unsigned long clk_slow_rc_osc_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct clk_slow_rc_osc *osc = to_clk_slow_rc_osc(hw);
+
+ return osc->frequency;
+}
+
+static unsigned long clk_slow_rc_osc_recalc_accuracy(struct clk_hw *hw,
+ unsigned long parent_acc)
+{
+ struct clk_slow_rc_osc *osc = to_clk_slow_rc_osc(hw);
+
+ return osc->accuracy;
+}
+
+static int clk_slow_rc_osc_prepare(struct clk_hw *hw)
+{
+ struct clk_slow_rc_osc *osc = to_clk_slow_rc_osc(hw);
+ void __iomem *sckcr = osc->sckcr;
+
+ writel(readl(sckcr) | AT91_SCKC_RCEN, sckcr);
+
+ usleep_range(osc->startup_usec, osc->startup_usec + 1);
+
+ return 0;
+}
+
+static void clk_slow_rc_osc_unprepare(struct clk_hw *hw)
+{
+ struct clk_slow_rc_osc *osc = to_clk_slow_rc_osc(hw);
+ void __iomem *sckcr = osc->sckcr;
+
+ writel(readl(sckcr) & ~AT91_SCKC_RCEN, sckcr);
+}
+
+static int clk_slow_rc_osc_is_prepared(struct clk_hw *hw)
+{
+ struct clk_slow_rc_osc *osc = to_clk_slow_rc_osc(hw);
+
+ return !!(readl(osc->sckcr) & AT91_SCKC_RCEN);
+}
+
+static const struct clk_ops slow_rc_osc_ops = {
+ .prepare = clk_slow_rc_osc_prepare,
+ .unprepare = clk_slow_rc_osc_unprepare,
+ .is_prepared = clk_slow_rc_osc_is_prepared,
+ .recalc_rate = clk_slow_rc_osc_recalc_rate,
+ .recalc_accuracy = clk_slow_rc_osc_recalc_accuracy,
+};
+
+static struct clk * __init
+at91_clk_register_slow_rc_osc(void __iomem *sckcr,
+ const char *name,
+ unsigned long frequency,
+ unsigned long accuracy,
+ unsigned long startup)
+{
+ struct clk_slow_rc_osc *osc;
+ struct clk *clk = NULL;
+ struct clk_init_data init;
+
+ if (!sckcr || !name)
+ return ERR_PTR(-EINVAL);
+
+ osc = kzalloc(sizeof(*osc), GFP_KERNEL);
+ if (!osc)
+ return ERR_PTR(-ENOMEM);
+
+ init.name = name;
+ init.ops = &slow_rc_osc_ops;
+ init.parent_names = NULL;
+ init.num_parents = 0;
+ init.flags = CLK_IS_ROOT | CLK_IGNORE_UNUSED;
+
+ osc->hw.init = &init;
+ osc->sckcr = sckcr;
+ osc->frequency = frequency;
+ osc->accuracy = accuracy;
+ osc->startup_usec = startup;
+
+ clk = clk_register(NULL, &osc->hw);
+ if (IS_ERR(clk))
+ kfree(osc);
+
+ return clk;
+}
+
+void __init of_at91sam9x5_clk_slow_rc_osc_setup(struct device_node *np,
+ void __iomem *sckcr)
+{
+ struct clk *clk;
+ u32 frequency = 0;
+ u32 accuracy = 0;
+ u32 startup = 0;
+ const char *name = np->name;
+
+ of_property_read_string(np, "clock-output-names", &name);
+ of_property_read_u32(np, "clock-frequency", &frequency);
+ of_property_read_u32(np, "clock-accuracy", &accuracy);
+ of_property_read_u32(np, "atmel,startup-time-usec", &startup);
+
+ clk = at91_clk_register_slow_rc_osc(sckcr, name, frequency, accuracy,
+ startup);
+ if (IS_ERR(clk))
+ return;
+
+ of_clk_add_provider(np, of_clk_src_simple_get, clk);
+}
+
+static int clk_sam9x5_slow_set_parent(struct clk_hw *hw, u8 index)
+{
+ struct clk_sam9x5_slow *slowck = to_clk_sam9x5_slow(hw);
+ void __iomem *sckcr = slowck->sckcr;
+ u32 tmp;
+
+ if (index > 1)
+ return -EINVAL;
+
+ tmp = readl(sckcr);
+
+ if ((!index && !(tmp & AT91_SCKC_OSCSEL)) ||
+ (index && (tmp & AT91_SCKC_OSCSEL)))
+ return 0;
+
+ if (index)
+ tmp |= AT91_SCKC_OSCSEL;
+ else
+ tmp &= ~AT91_SCKC_OSCSEL;
+
+ writel(tmp, sckcr);
+
+ usleep_range(SLOWCK_SW_TIME_USEC, SLOWCK_SW_TIME_USEC + 1);
+
+ return 0;
+}
+
+static u8 clk_sam9x5_slow_get_parent(struct clk_hw *hw)
+{
+ struct clk_sam9x5_slow *slowck = to_clk_sam9x5_slow(hw);
+
+ return !!(readl(slowck->sckcr) & AT91_SCKC_OSCSEL);
+}
+
+static const struct clk_ops sam9x5_slow_ops = {
+ .set_parent = clk_sam9x5_slow_set_parent,
+ .get_parent = clk_sam9x5_slow_get_parent,
+};
+
+static struct clk * __init
+at91_clk_register_sam9x5_slow(void __iomem *sckcr,
+ const char *name,
+ const char **parent_names,
+ int num_parents)
+{
+ struct clk_sam9x5_slow *slowck;
+ struct clk *clk = NULL;
+ struct clk_init_data init;
+
+ if (!sckcr || !name || !parent_names || !num_parents)
+ return ERR_PTR(-EINVAL);
+
+ slowck = kzalloc(sizeof(*slowck), GFP_KERNEL);
+ if (!slowck)
+ return ERR_PTR(-ENOMEM);
+
+ init.name = name;
+ init.ops = &sam9x5_slow_ops;
+ init.parent_names = parent_names;
+ init.num_parents = num_parents;
+ init.flags = 0;
+
+ slowck->hw.init = &init;
+ slowck->sckcr = sckcr;
+ slowck->parent = !!(readl(sckcr) & AT91_SCKC_OSCSEL);
+
+ clk = clk_register(NULL, &slowck->hw);
+ if (IS_ERR(clk))
+ kfree(slowck);
+
+ return clk;
+}
+
+void __init of_at91sam9x5_clk_slow_setup(struct device_node *np,
+ void __iomem *sckcr)
+{
+ struct clk *clk;
+ const char *parent_names[2];
+ int num_parents;
+ const char *name = np->name;
+ int i;
+
+ num_parents = of_count_phandle_with_args(np, "clocks", "#clock-cells");
+ if (num_parents <= 0 || num_parents > 2)
+ return;
+
+ for (i = 0; i < num_parents; ++i) {
+ parent_names[i] = of_clk_get_parent_name(np, i);
+ if (!parent_names[i])
+ return;
+ }
+
+ of_property_read_string(np, "clock-output-names", &name);
+
+ clk = at91_clk_register_sam9x5_slow(sckcr, name, parent_names,
+ num_parents);
+ if (IS_ERR(clk))
+ return;
+
+ of_clk_add_provider(np, of_clk_src_simple_get, clk);
+}
+
+static u8 clk_sam9260_slow_get_parent(struct clk_hw *hw)
+{
+ struct clk_sam9260_slow *slowck = to_clk_sam9260_slow(hw);
+
+ return !!(pmc_read(slowck->pmc, AT91_PMC_SR) & AT91_PMC_OSCSEL);
+}
+
+static const struct clk_ops sam9260_slow_ops = {
+ .get_parent = clk_sam9260_slow_get_parent,
+};
+
+static struct clk * __init
+at91_clk_register_sam9260_slow(struct at91_pmc *pmc,
+ const char *name,
+ const char **parent_names,
+ int num_parents)
+{
+ struct clk_sam9260_slow *slowck;
+ struct clk *clk = NULL;
+ struct clk_init_data init;
+
+ if (!pmc || !name)
+ return ERR_PTR(-EINVAL);
+
+ if (!parent_names || !num_parents)
+ return ERR_PTR(-EINVAL);
+
+ slowck = kzalloc(sizeof(*slowck), GFP_KERNEL);
+ if (!slowck)
+ return ERR_PTR(-ENOMEM);
+
+ init.name = name;
+ init.ops = &sam9260_slow_ops;
+ init.parent_names = parent_names;
+ init.num_parents = num_parents;
+ init.flags = 0;
+
+ slowck->hw.init = &init;
+ slowck->pmc = pmc;
+
+ clk = clk_register(NULL, &slowck->hw);
+ if (IS_ERR(clk))
+ kfree(slowck);
+
+ return clk;
+}
+
+void __init of_at91sam9260_clk_slow_setup(struct device_node *np,
+ struct at91_pmc *pmc)
+{
+ struct clk *clk;
+ const char *parent_names[2];
+ int num_parents;
+ const char *name = np->name;
+ int i;
+
+ num_parents = of_count_phandle_with_args(np, "clocks", "#clock-cells");
+ if (num_parents <= 0 || num_parents > 1)
+ return;
+
+ for (i = 0; i < num_parents; ++i) {
+ parent_names[i] = of_clk_get_parent_name(np, i);
+ if (!parent_names[i])
+ return;
+ }
+
+ of_property_read_string(np, "clock-output-names", &name);
+
+ clk = at91_clk_register_sam9260_slow(pmc, name, parent_names,
+ num_parents);
+ if (IS_ERR(clk))
+ return;
+
+ of_clk_add_provider(np, of_clk_src_simple_get, clk);
+}
diff --git a/drivers/clk/at91/pmc.c b/drivers/clk/at91/pmc.c
index 6a61477a57e0..524196bb35a5 100644
--- a/drivers/clk/at91/pmc.c
+++ b/drivers/clk/at91/pmc.c
@@ -229,11 +229,28 @@ out_free_pmc:
}
static const struct of_device_id pmc_clk_ids[] __initconst = {
+ /* Slow oscillator */
+ {
+ .compatible = "atmel,at91sam9260-clk-slow",
+ .data = of_at91sam9260_clk_slow_setup,
+ },
/* Main clock */
{
+ .compatible = "atmel,at91rm9200-clk-main-osc",
+ .data = of_at91rm9200_clk_main_osc_setup,
+ },
+ {
+ .compatible = "atmel,at91sam9x5-clk-main-rc-osc",
+ .data = of_at91sam9x5_clk_main_rc_osc_setup,
+ },
+ {
.compatible = "atmel,at91rm9200-clk-main",
.data = of_at91rm9200_clk_main_setup,
},
+ {
+ .compatible = "atmel,at91sam9x5-clk-main",
+ .data = of_at91sam9x5_clk_main_setup,
+ },
/* PLL clocks */
{
.compatible = "atmel,at91rm9200-clk-pll",
diff --git a/drivers/clk/at91/pmc.h b/drivers/clk/at91/pmc.h
index 441350983ccb..6c7625976113 100644
--- a/drivers/clk/at91/pmc.h
+++ b/drivers/clk/at91/pmc.h
@@ -58,8 +58,17 @@ static inline void pmc_write(struct at91_pmc *pmc, int offset, u32 value)
int of_at91_get_clk_range(struct device_node *np, const char *propname,
struct clk_range *range);
+extern void __init of_at91sam9260_clk_slow_setup(struct device_node *np,
+ struct at91_pmc *pmc);
+
+extern void __init of_at91rm9200_clk_main_osc_setup(struct device_node *np,
+ struct at91_pmc *pmc);
+extern void __init of_at91sam9x5_clk_main_rc_osc_setup(struct device_node *np,
+ struct at91_pmc *pmc);
extern void __init of_at91rm9200_clk_main_setup(struct device_node *np,
struct at91_pmc *pmc);
+extern void __init of_at91sam9x5_clk_main_setup(struct device_node *np,
+ struct at91_pmc *pmc);
extern void __init of_at91rm9200_clk_pll_setup(struct device_node *np,
struct at91_pmc *pmc);
diff --git a/drivers/clk/at91/sckc.c b/drivers/clk/at91/sckc.c
new file mode 100644
index 000000000000..1184d76a7ab7
--- /dev/null
+++ b/drivers/clk/at91/sckc.c
@@ -0,0 +1,57 @@
+/*
+ * drivers/clk/at91/sckc.c
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/io.h>
+
+#include "sckc.h"
+
+static const struct of_device_id sckc_clk_ids[] __initconst = {
+ /* Slow clock */
+ {
+ .compatible = "atmel,at91sam9x5-clk-slow-osc",
+ .data = of_at91sam9x5_clk_slow_osc_setup,
+ },
+ {
+ .compatible = "atmel,at91sam9x5-clk-slow-rc-osc",
+ .data = of_at91sam9x5_clk_slow_rc_osc_setup,
+ },
+ {
+ .compatible = "atmel,at91sam9x5-clk-slow",
+ .data = of_at91sam9x5_clk_slow_setup,
+ },
+ { /*sentinel*/ }
+};
+
+static void __init of_at91sam9x5_sckc_setup(struct device_node *np)
+{
+ struct device_node *childnp;
+ void (*clk_setup)(struct device_node *, void __iomem *);
+ const struct of_device_id *clk_id;
+ void __iomem *regbase = of_iomap(np, 0);
+
+ if (!regbase)
+ return;
+
+ for_each_child_of_node(np, childnp) {
+ clk_id = of_match_node(sckc_clk_ids, childnp);
+ if (!clk_id)
+ continue;
+ clk_setup = clk_id->data;
+ clk_setup(childnp, regbase);
+ }
+}
+CLK_OF_DECLARE(at91sam9x5_clk_sckc, "atmel,at91sam9x5-sckc",
+ of_at91sam9x5_sckc_setup);
diff --git a/drivers/clk/at91/sckc.h b/drivers/clk/at91/sckc.h
new file mode 100644
index 000000000000..836fcf59820f
--- /dev/null
+++ b/drivers/clk/at91/sckc.h
@@ -0,0 +1,22 @@
+/*
+ * drivers/clk/at91/sckc.h
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __AT91_SCKC_H_
+#define __AT91_SCKC_H_
+
+extern void __init of_at91sam9x5_clk_slow_osc_setup(struct device_node *np,
+ void __iomem *sckcr);
+extern void __init of_at91sam9x5_clk_slow_rc_osc_setup(struct device_node *np,
+ void __iomem *sckcr);
+extern void __init of_at91sam9x5_clk_slow_setup(struct device_node *np,
+ void __iomem *sckcr);
+
+#endif /* __AT91_SCKC_H_ */
diff --git a/drivers/clk/samsung/Kconfig b/drivers/clk/samsung/Kconfig
new file mode 100644
index 000000000000..84196ecdaa12
--- /dev/null
+++ b/drivers/clk/samsung/Kconfig
@@ -0,0 +1,26 @@
+config COMMON_CLK_SAMSUNG
+ bool
+ select COMMON_CLK
+
+config S3C2410_COMMON_CLK
+ bool
+ select COMMON_CLK_SAMSUNG
+ help
+ Build the s3c2410 clock driver based on the common clock framework.
+
+config S3C2410_COMMON_DCLK
+ bool
+ select COMMON_CLK_SAMSUNG
+ select REGMAP_MMIO
+ help
+ Temporary symbol to build the dclk driver based on the common clock
+ framework.
+
+config S3C2412_COMMON_CLK
+ bool
+ select COMMON_CLK_SAMSUNG
+
+config S3C2443_COMMON_CLK
+ bool
+ select COMMON_CLK_SAMSUNG
+
diff --git a/drivers/clk/samsung/Makefile b/drivers/clk/samsung/Makefile
index 2cb62f87e068..69e81773164e 100644
--- a/drivers/clk/samsung/Makefile
+++ b/drivers/clk/samsung/Makefile
@@ -3,8 +3,11 @@
#
obj-$(CONFIG_COMMON_CLK) += clk.o clk-pll.o
+obj-$(CONFIG_SOC_EXYNOS3250) += clk-exynos3250.o
obj-$(CONFIG_ARCH_EXYNOS4) += clk-exynos4.o
obj-$(CONFIG_SOC_EXYNOS5250) += clk-exynos5250.o
+obj-$(CONFIG_SOC_EXYNOS5260) += clk-exynos5260.o
+obj-$(CONFIG_SOC_EXYNOS5410) += clk-exynos5410.o
obj-$(CONFIG_SOC_EXYNOS5420) += clk-exynos5420.o
obj-$(CONFIG_SOC_EXYNOS5440) += clk-exynos5440.o
obj-$(CONFIG_ARCH_EXYNOS) += clk-exynos-audss.o
diff --git a/drivers/clk/samsung/clk-exynos3250.c b/drivers/clk/samsung/clk-exynos3250.c
new file mode 100644
index 000000000000..7a17bd40d1dd
--- /dev/null
+++ b/drivers/clk/samsung/clk-exynos3250.c
@@ -0,0 +1,780 @@
+/*
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Common Clock Framework support for Exynos3250 SoC.
+ */
+
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/syscore_ops.h>
+
+#include <dt-bindings/clock/exynos3250.h>
+
+#include "clk.h"
+#include "clk-pll.h"
+
+#define SRC_LEFTBUS 0x4200
+#define DIV_LEFTBUS 0x4500
+#define GATE_IP_LEFTBUS 0x4800
+#define SRC_RIGHTBUS 0x8200
+#define DIV_RIGHTBUS 0x8500
+#define GATE_IP_RIGHTBUS 0x8800
+#define GATE_IP_PERIR 0x8960
+#define MPLL_LOCK 0xc010
+#define MPLL_CON0 0xc110
+#define VPLL_LOCK 0xc020
+#define VPLL_CON0 0xc120
+#define UPLL_LOCK 0xc030
+#define UPLL_CON0 0xc130
+#define SRC_TOP0 0xc210
+#define SRC_TOP1 0xc214
+#define SRC_CAM 0xc220
+#define SRC_MFC 0xc228
+#define SRC_G3D 0xc22c
+#define SRC_LCD 0xc234
+#define SRC_ISP 0xc238
+#define SRC_FSYS 0xc240
+#define SRC_PERIL0 0xc250
+#define SRC_PERIL1 0xc254
+#define SRC_MASK_TOP 0xc310
+#define SRC_MASK_CAM 0xc320
+#define SRC_MASK_LCD 0xc334
+#define SRC_MASK_ISP 0xc338
+#define SRC_MASK_FSYS 0xc340
+#define SRC_MASK_PERIL0 0xc350
+#define SRC_MASK_PERIL1 0xc354
+#define DIV_TOP 0xc510
+#define DIV_CAM 0xc520
+#define DIV_MFC 0xc528
+#define DIV_G3D 0xc52c
+#define DIV_LCD 0xc534
+#define DIV_ISP 0xc538
+#define DIV_FSYS0 0xc540
+#define DIV_FSYS1 0xc544
+#define DIV_FSYS2 0xc548
+#define DIV_PERIL0 0xc550
+#define DIV_PERIL1 0xc554
+#define DIV_PERIL3 0xc55c
+#define DIV_PERIL4 0xc560
+#define DIV_PERIL5 0xc564
+#define DIV_CAM1 0xc568
+#define CLKDIV2_RATIO 0xc580
+#define GATE_SCLK_CAM 0xc820
+#define GATE_SCLK_MFC 0xc828
+#define GATE_SCLK_G3D 0xc82c
+#define GATE_SCLK_LCD 0xc834
+#define GATE_SCLK_ISP_TOP 0xc838
+#define GATE_SCLK_FSYS 0xc840
+#define GATE_SCLK_PERIL 0xc850
+#define GATE_IP_CAM 0xc920
+#define GATE_IP_MFC 0xc928
+#define GATE_IP_G3D 0xc92c
+#define GATE_IP_LCD 0xc934
+#define GATE_IP_ISP 0xc938
+#define GATE_IP_FSYS 0xc940
+#define GATE_IP_PERIL 0xc950
+#define GATE_BLOCK 0xc970
+#define APLL_LOCK 0x14000
+#define APLL_CON0 0x14100
+#define SRC_CPU 0x14200
+#define DIV_CPU0 0x14500
+#define DIV_CPU1 0x14504
+
+/* list of PLLs to be registered */
+enum exynos3250_plls {
+ apll, mpll, vpll, upll,
+ nr_plls
+};
+
+static void __iomem *reg_base;
+
+/*
+ * Support for CMU save/restore across system suspends
+ */
+#ifdef CONFIG_PM_SLEEP
+static struct samsung_clk_reg_dump *exynos3250_clk_regs;
+
+static unsigned long exynos3250_cmu_clk_regs[] __initdata = {
+ SRC_LEFTBUS,
+ DIV_LEFTBUS,
+ GATE_IP_LEFTBUS,
+ SRC_RIGHTBUS,
+ DIV_RIGHTBUS,
+ GATE_IP_RIGHTBUS,
+ GATE_IP_PERIR,
+ MPLL_LOCK,
+ MPLL_CON0,
+ VPLL_LOCK,
+ VPLL_CON0,
+ UPLL_LOCK,
+ UPLL_CON0,
+ SRC_TOP0,
+ SRC_TOP1,
+ SRC_CAM,
+ SRC_MFC,
+ SRC_G3D,
+ SRC_LCD,
+ SRC_ISP,
+ SRC_FSYS,
+ SRC_PERIL0,
+ SRC_PERIL1,
+ SRC_MASK_TOP,
+ SRC_MASK_CAM,
+ SRC_MASK_LCD,
+ SRC_MASK_ISP,
+ SRC_MASK_FSYS,
+ SRC_MASK_PERIL0,
+ SRC_MASK_PERIL1,
+ DIV_TOP,
+ DIV_CAM,
+ DIV_MFC,
+ DIV_G3D,
+ DIV_LCD,
+ DIV_ISP,
+ DIV_FSYS0,
+ DIV_FSYS1,
+ DIV_FSYS2,
+ DIV_PERIL0,
+ DIV_PERIL1,
+ DIV_PERIL3,
+ DIV_PERIL4,
+ DIV_PERIL5,
+ DIV_CAM1,
+ CLKDIV2_RATIO,
+ GATE_SCLK_CAM,
+ GATE_SCLK_MFC,
+ GATE_SCLK_G3D,
+ GATE_SCLK_LCD,
+ GATE_SCLK_ISP_TOP,
+ GATE_SCLK_FSYS,
+ GATE_SCLK_PERIL,
+ GATE_IP_CAM,
+ GATE_IP_MFC,
+ GATE_IP_G3D,
+ GATE_IP_LCD,
+ GATE_IP_ISP,
+ GATE_IP_FSYS,
+ GATE_IP_PERIL,
+ GATE_BLOCK,
+ APLL_LOCK,
+ SRC_CPU,
+ DIV_CPU0,
+ DIV_CPU1,
+};
+
+static int exynos3250_clk_suspend(void)
+{
+ samsung_clk_save(reg_base, exynos3250_clk_regs,
+ ARRAY_SIZE(exynos3250_cmu_clk_regs));
+ return 0;
+}
+
+static void exynos3250_clk_resume(void)
+{
+ samsung_clk_restore(reg_base, exynos3250_clk_regs,
+ ARRAY_SIZE(exynos3250_cmu_clk_regs));
+}
+
+static struct syscore_ops exynos3250_clk_syscore_ops = {
+ .suspend = exynos3250_clk_suspend,
+ .resume = exynos3250_clk_resume,
+};
+
+static void exynos3250_clk_sleep_init(void)
+{
+ exynos3250_clk_regs =
+ samsung_clk_alloc_reg_dump(exynos3250_cmu_clk_regs,
+ ARRAY_SIZE(exynos3250_cmu_clk_regs));
+ if (!exynos3250_clk_regs) {
+ pr_warn("%s: Failed to allocate sleep save data\n", __func__);
+ goto err;
+ }
+
+ register_syscore_ops(&exynos3250_clk_syscore_ops);
+ return;
+err:
+ kfree(exynos3250_clk_regs);
+}
+#else
+static inline void exynos3250_clk_sleep_init(void) { }
+#endif
+
+/* list of all parent clock list */
+PNAME(mout_vpllsrc_p) = { "fin_pll", };
+
+PNAME(mout_apll_p) = { "fin_pll", "fout_apll", };
+PNAME(mout_mpll_p) = { "fin_pll", "fout_mpll", };
+PNAME(mout_vpll_p) = { "fin_pll", "fout_vpll", };
+PNAME(mout_upll_p) = { "fin_pll", "fout_upll", };
+
+PNAME(mout_mpll_user_p) = { "fin_pll", "div_mpll_pre", };
+PNAME(mout_epll_user_p) = { "fin_pll", "mout_epll", };
+PNAME(mout_core_p) = { "mout_apll", "mout_mpll_user_c", };
+PNAME(mout_hpm_p) = { "mout_apll", "mout_mpll_user_c", };
+
+PNAME(mout_ebi_p) = { "div_aclk_200", "div_aclk_160", };
+PNAME(mout_ebi_1_p) = { "mout_ebi", "mout_vpll", };
+
+PNAME(mout_gdl_p) = { "mout_mpll_user_l", };
+PNAME(mout_gdr_p) = { "mout_mpll_user_r", };
+
+PNAME(mout_aclk_400_mcuisp_sub_p)
+ = { "fin_pll", "div_aclk_400_mcuisp", };
+PNAME(mout_aclk_266_0_p) = { "div_mpll_pre", "mout_vpll", };
+PNAME(mout_aclk_266_1_p) = { "mout_epll_user", };
+PNAME(mout_aclk_266_p) = { "mout_aclk_266_0", "mout_aclk_266_1", };
+PNAME(mout_aclk_266_sub_p) = { "fin_pll", "div_aclk_266", };
+
+PNAME(group_div_mpll_pre_p) = { "div_mpll_pre", };
+PNAME(group_epll_vpll_p) = { "mout_epll_user", "mout_vpll" };
+PNAME(group_sclk_p) = { "xxti", "xusbxti",
+ "none", "none",
+ "none", "none", "div_mpll_pre",
+ "mout_epll_user", "mout_vpll", };
+PNAME(group_sclk_audio_p) = { "audiocdclk", "none",
+ "none", "none",
+ "xxti", "xusbxti",
+ "div_mpll_pre", "mout_epll_user",
+ "mout_vpll", };
+PNAME(group_sclk_cam_blk_p) = { "xxti", "xusbxti",
+ "none", "none", "none",
+ "none", "div_mpll_pre",
+ "mout_epll_user", "mout_vpll",
+ "div_cam_blk_320", };
+PNAME(group_sclk_fimd0_p) = { "xxti", "xusbxti",
+ "m_bitclkhsdiv4_2l", "none",
+ "none", "none", "div_mpll_pre",
+ "mout_epll_user", "mout_vpll",
+ "none", "none", "none",
+ "div_lcd_blk_145", };
+
+PNAME(mout_mfc_p) = { "mout_mfc_0", "mout_mfc_1" };
+PNAME(mout_g3d_p) = { "mout_g3d_0", "mout_g3d_1" };
+
+static struct samsung_fixed_factor_clock fixed_factor_clks[] __initdata = {
+ FFACTOR(0, "sclk_mpll_1600", "mout_mpll", 1, 1, 0),
+ FFACTOR(0, "sclk_mpll_mif", "mout_mpll", 1, 2, 0),
+ FFACTOR(0, "sclk_bpll", "fout_bpll", 1, 2, 0),
+ FFACTOR(0, "div_cam_blk_320", "sclk_mpll_1600", 1, 5, 0),
+ FFACTOR(0, "div_lcd_blk_145", "sclk_mpll_1600", 1, 11, 0),
+
+ /* HACK: fin_pll hardcoded to xusbxti until detection is implemented. */
+ FFACTOR(CLK_FIN_PLL, "fin_pll", "xusbxti", 1, 1, 0),
+};
+
+static struct samsung_mux_clock mux_clks[] __initdata = {
+ /*
+ * NOTE: Following table is sorted by register address in ascending
+ * order and then bitfield shift in descending order, as it is done
+ * in the User's Manual. When adding new entries, please make sure
+ * that the order is preserved, to avoid merge conflicts and make
+ * further work with defined data easier.
+ */
+
+ /* SRC_LEFTBUS */
+ MUX(CLK_MOUT_MPLL_USER_L, "mout_mpll_user_l", mout_mpll_user_p,
+ SRC_LEFTBUS, 4, 1),
+ MUX(CLK_MOUT_GDL, "mout_gdl", mout_gdl_p, SRC_LEFTBUS, 0, 1),
+
+ /* SRC_RIGHTBUS */
+ MUX(CLK_MOUT_MPLL_USER_R, "mout_mpll_user_r", mout_mpll_user_p,
+ SRC_RIGHTBUS, 4, 1),
+ MUX(CLK_MOUT_GDR, "mout_gdr", mout_gdr_p, SRC_RIGHTBUS, 0, 1),
+
+ /* SRC_TOP0 */
+ MUX(CLK_MOUT_EBI, "mout_ebi", mout_ebi_p, SRC_TOP0, 28, 1),
+ MUX(CLK_MOUT_ACLK_200, "mout_aclk_200", group_div_mpll_pre_p,SRC_TOP0, 24, 1),
+ MUX(CLK_MOUT_ACLK_160, "mout_aclk_160", group_div_mpll_pre_p, SRC_TOP0, 20, 1),
+ MUX(CLK_MOUT_ACLK_100, "mout_aclk_100", group_div_mpll_pre_p, SRC_TOP0, 16, 1),
+ MUX(CLK_MOUT_ACLK_266_1, "mout_aclk_266_1", mout_aclk_266_1_p, SRC_TOP0, 14, 1),
+ MUX(CLK_MOUT_ACLK_266_0, "mout_aclk_266_0", mout_aclk_266_0_p, SRC_TOP0, 13, 1),
+ MUX(CLK_MOUT_ACLK_266, "mout_aclk_266", mout_aclk_266_p, SRC_TOP0, 12, 1),
+ MUX(CLK_MOUT_VPLL, "mout_vpll", mout_vpll_p, SRC_TOP0, 8, 1),
+ MUX(CLK_MOUT_EPLL_USER, "mout_epll_user", mout_epll_user_p, SRC_TOP0, 4, 1),
+ MUX(CLK_MOUT_EBI_1, "mout_ebi_1", mout_ebi_1_p, SRC_TOP0, 0, 1),
+
+ /* SRC_TOP1 */
+ MUX(CLK_MOUT_UPLL, "mout_upll", mout_upll_p, SRC_TOP1, 28, 1),
+ MUX(CLK_MOUT_ACLK_400_MCUISP_SUB, "mout_aclk_400_mcuisp_sub", mout_aclk_400_mcuisp_sub_p,
+ SRC_TOP1, 24, 1),
+ MUX(CLK_MOUT_ACLK_266_SUB, "mout_aclk_266_sub", mout_aclk_266_sub_p, SRC_TOP1, 20, 1),
+ MUX(CLK_MOUT_MPLL, "mout_mpll", mout_mpll_p, SRC_TOP1, 12, 1),
+ MUX(CLK_MOUT_ACLK_400_MCUISP, "mout_aclk_400_mcuisp", group_div_mpll_pre_p, SRC_TOP1, 8, 1),
+ MUX(CLK_MOUT_VPLLSRC, "mout_vpllsrc", mout_vpllsrc_p, SRC_TOP1, 0, 1),
+
+ /* SRC_CAM */
+ MUX(CLK_MOUT_CAM1, "mout_cam1", group_sclk_p, SRC_CAM, 20, 4),
+ MUX(CLK_MOUT_CAM_BLK, "mout_cam_blk", group_sclk_cam_blk_p, SRC_CAM, 0, 4),
+
+ /* SRC_MFC */
+ MUX(CLK_MOUT_MFC, "mout_mfc", mout_mfc_p, SRC_MFC, 8, 1),
+ MUX(CLK_MOUT_MFC_1, "mout_mfc_1", group_epll_vpll_p, SRC_MFC, 4, 1),
+ MUX(CLK_MOUT_MFC_0, "mout_mfc_0", group_div_mpll_pre_p, SRC_MFC, 0, 1),
+
+ /* SRC_G3D */
+ MUX(CLK_MOUT_G3D, "mout_g3d", mout_g3d_p, SRC_G3D, 8, 1),
+ MUX(CLK_MOUT_G3D_1, "mout_g3d_1", group_epll_vpll_p, SRC_G3D, 4, 1),
+ MUX(CLK_MOUT_G3D_0, "mout_g3d_0", group_div_mpll_pre_p, SRC_G3D, 0, 1),
+
+ /* SRC_LCD */
+ MUX(CLK_MOUT_MIPI0, "mout_mipi0", group_sclk_p, SRC_LCD, 12, 4),
+ MUX(CLK_MOUT_FIMD0, "mout_fimd0", group_sclk_fimd0_p, SRC_LCD, 0, 4),
+
+ /* SRC_ISP */
+ MUX(CLK_MOUT_UART_ISP, "mout_uart_isp", group_sclk_p, SRC_ISP, 12, 4),
+ MUX(CLK_MOUT_SPI1_ISP, "mout_spi1_isp", group_sclk_p, SRC_ISP, 8, 4),
+ MUX(CLK_MOUT_SPI0_ISP, "mout_spi0_isp", group_sclk_p, SRC_ISP, 4, 4),
+
+ /* SRC_FSYS */
+ MUX(CLK_MOUT_TSADC, "mout_tsadc", group_sclk_p, SRC_FSYS, 28, 4),
+ MUX(CLK_MOUT_MMC1, "mout_mmc1", group_sclk_p, SRC_FSYS, 4, 3),
+ MUX(CLK_MOUT_MMC0, "mout_mmc0", group_sclk_p, SRC_FSYS, 0, 3),
+
+ /* SRC_PERIL0 */
+ MUX(CLK_MOUT_UART1, "mout_uart1", group_sclk_p, SRC_PERIL0, 4, 4),
+ MUX(CLK_MOUT_UART0, "mout_uart0", group_sclk_p, SRC_PERIL0, 0, 4),
+
+ /* SRC_PERIL1 */
+ MUX(CLK_MOUT_SPI1, "mout_spi1", group_sclk_p, SRC_PERIL1, 20, 4),
+ MUX(CLK_MOUT_SPI0, "mout_spi0", group_sclk_p, SRC_PERIL1, 16, 4),
+ MUX(CLK_MOUT_AUDIO, "mout_audio", group_sclk_audio_p, SRC_PERIL1, 4, 4),
+
+ /* SRC_CPU */
+ MUX(CLK_MOUT_MPLL_USER_C, "mout_mpll_user_c", mout_mpll_user_p,
+ SRC_CPU, 24, 1),
+ MUX(CLK_MOUT_HPM, "mout_hpm", mout_hpm_p, SRC_CPU, 20, 1),
+ MUX(CLK_MOUT_CORE, "mout_core", mout_core_p, SRC_CPU, 16, 1),
+ MUX(CLK_MOUT_APLL, "mout_apll", mout_apll_p, SRC_CPU, 0, 1),
+};
+
+static struct samsung_div_clock div_clks[] __initdata = {
+ /*
+ * NOTE: Following table is sorted by register address in ascending
+ * order and then bitfield shift in descending order, as it is done
+ * in the User's Manual. When adding new entries, please make sure
+ * that the order is preserved, to avoid merge conflicts and make
+ * further work with defined data easier.
+ */
+
+ /* DIV_LEFTBUS */
+ DIV(CLK_DIV_GPL, "div_gpl", "div_gdl", DIV_LEFTBUS, 4, 3),
+ DIV(CLK_DIV_GDL, "div_gdl", "mout_gdl", DIV_LEFTBUS, 0, 4),
+
+ /* DIV_RIGHTBUS */
+ DIV(CLK_DIV_GPR, "div_gpr", "div_gdr", DIV_RIGHTBUS, 4, 3),
+ DIV(CLK_DIV_GDR, "div_gdr", "mout_gdr", DIV_RIGHTBUS, 0, 4),
+
+ /* DIV_TOP */
+ DIV(CLK_DIV_MPLL_PRE, "div_mpll_pre", "sclk_mpll_mif", DIV_TOP, 28, 2),
+ DIV(CLK_DIV_ACLK_400_MCUISP, "div_aclk_400_mcuisp",
+ "mout_aclk_400_mcuisp", DIV_TOP, 24, 3),
+ DIV(CLK_DIV_EBI, "div_ebi", "mout_ebi_1", DIV_TOP, 16, 3),
+ DIV(CLK_DIV_ACLK_200, "div_aclk_200", "mout_aclk_200", DIV_TOP, 12, 3),
+ DIV(CLK_DIV_ACLK_160, "div_aclk_160", "mout_aclk_160", DIV_TOP, 8, 3),
+ DIV(CLK_DIV_ACLK_100, "div_aclk_100", "mout_aclk_100", DIV_TOP, 4, 4),
+ DIV(CLK_DIV_ACLK_266, "div_aclk_266", "mout_aclk_266", DIV_TOP, 0, 3),
+
+ /* DIV_CAM */
+ DIV(CLK_DIV_CAM1, "div_cam1", "mout_cam1", DIV_CAM, 20, 4),
+ DIV(CLK_DIV_CAM_BLK, "div_cam_blk", "mout_cam_blk", DIV_CAM, 0, 4),
+
+ /* DIV_MFC */
+ DIV(CLK_DIV_MFC, "div_mfc", "mout_mfc", DIV_MFC, 0, 4),
+
+ /* DIV_G3D */
+ DIV(CLK_DIV_G3D, "div_g3d", "mout_g3d", DIV_G3D, 0, 4),
+
+ /* DIV_LCD */
+ DIV_F(CLK_DIV_MIPI0_PRE, "div_mipi0_pre", "div_mipi0", DIV_LCD, 20, 4,
+ CLK_SET_RATE_PARENT, 0),
+ DIV(CLK_DIV_MIPI0, "div_mipi0", "mout_mipi0", DIV_LCD, 16, 4),
+ DIV(CLK_DIV_FIMD0, "div_fimd0", "mout_fimd0", DIV_LCD, 0, 4),
+
+ /* DIV_ISP */
+ DIV(CLK_DIV_UART_ISP, "div_uart_isp", "mout_uart_isp", DIV_ISP, 28, 4),
+ DIV_F(CLK_DIV_SPI1_ISP_PRE, "div_spi1_isp_pre", "div_spi1_isp",
+ DIV_ISP, 20, 8, CLK_SET_RATE_PARENT, 0),
+ DIV(CLK_DIV_SPI1_ISP, "div_spi1_isp", "mout_spi1_isp", DIV_ISP, 16, 4),
+ DIV_F(CLK_DIV_SPI0_ISP_PRE, "div_spi0_isp_pre", "div_spi0_isp",
+ DIV_ISP, 8, 8, CLK_SET_RATE_PARENT, 0),
+ DIV(CLK_DIV_SPI0_ISP, "div_spi0_isp", "mout_spi0_isp", DIV_ISP, 0, 4),
+
+ /* DIV_FSYS0 */
+ DIV_F(CLK_DIV_TSADC_PRE, "div_tsadc_pre", "div_tsadc", DIV_FSYS0, 8, 8,
+ CLK_SET_RATE_PARENT, 0),
+ DIV(CLK_DIV_TSADC, "div_tsadc", "mout_tsadc", DIV_FSYS0, 0, 4),
+
+ /* DIV_FSYS1 */
+ DIV_F(CLK_DIV_MMC1_PRE, "div_mmc1_pre", "div_mmc1", DIV_FSYS1, 24, 8,
+ CLK_SET_RATE_PARENT, 0),
+ DIV(CLK_DIV_MMC1, "div_mmc1", "mout_mmc1", DIV_FSYS1, 16, 4),
+ DIV_F(CLK_DIV_MMC0_PRE, "div_mmc0_pre", "div_mmc0", DIV_FSYS1, 8, 8,
+ CLK_SET_RATE_PARENT, 0),
+ DIV(CLK_DIV_MMC0, "div_mmc0", "mout_mmc0", DIV_FSYS1, 0, 4),
+
+ /* DIV_PERIL0 */
+ DIV(CLK_DIV_UART1, "div_uart1", "mout_uart1", DIV_PERIL0, 4, 4),
+ DIV(CLK_DIV_UART0, "div_uart0", "mout_uart0", DIV_PERIL0, 0, 4),
+
+ /* DIV_PERIL1 */
+ DIV_F(CLK_DIV_SPI1_PRE, "div_spi1_pre", "div_spi1", DIV_PERIL1, 24, 8,
+ CLK_SET_RATE_PARENT, 0),
+ DIV(CLK_DIV_SPI1, "div_spi1", "mout_spi1", DIV_PERIL1, 16, 4),
+ DIV_F(CLK_DIV_SPI0_PRE, "div_spi0_pre", "div_spi0", DIV_PERIL1, 8, 8,
+ CLK_SET_RATE_PARENT, 0),
+ DIV(CLK_DIV_SPI0, "div_spi0", "mout_spi0", DIV_PERIL1, 0, 4),
+
+ /* DIV_PERIL4 */
+ DIV(CLK_DIV_PCM, "div_pcm", "div_audio", DIV_PERIL4, 20, 8),
+ DIV(CLK_DIV_AUDIO, "div_audio", "mout_audio", DIV_PERIL4, 16, 4),
+
+ /* DIV_PERIL5 */
+ DIV(CLK_DIV_I2S, "div_i2s", "div_audio", DIV_PERIL5, 8, 6),
+
+ /* DIV_CPU0 */
+ DIV(CLK_DIV_CORE2, "div_core2", "div_core", DIV_CPU0, 28, 3),
+ DIV(CLK_DIV_APLL, "div_apll", "mout_apll", DIV_CPU0, 24, 3),
+ DIV(CLK_DIV_PCLK_DBG, "div_pclk_dbg", "div_core2", DIV_CPU0, 20, 3),
+ DIV(CLK_DIV_ATB, "div_atb", "div_core2", DIV_CPU0, 16, 3),
+ DIV(CLK_DIV_COREM, "div_corem", "div_core2", DIV_CPU0, 4, 3),
+ DIV(CLK_DIV_CORE, "div_core", "mout_core", DIV_CPU0, 0, 3),
+
+ /* DIV_CPU1 */
+ DIV(CLK_DIV_HPM, "div_hpm", "div_copy", DIV_CPU1, 4, 3),
+ DIV(CLK_DIV_COPY, "div_copy", "mout_hpm", DIV_CPU1, 0, 3),
+};
+
+static struct samsung_gate_clock gate_clks[] __initdata = {
+ /*
+ * NOTE: Following table is sorted by register address in ascending
+ * order and then bitfield shift in descending order, as it is done
+ * in the User's Manual. When adding new entries, please make sure
+ * that the order is preserved, to avoid merge conflicts and make
+ * further work with defined data easier.
+ */
+
+ /* GATE_IP_LEFTBUS */
+ GATE(CLK_ASYNC_G3D, "async_g3d", "div_aclk_100", GATE_IP_LEFTBUS, 6,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ASYNC_MFCL, "async_mfcl", "div_aclk_100", GATE_IP_LEFTBUS, 4,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_PPMULEFT, "ppmuleft", "div_aclk_100", GATE_IP_LEFTBUS, 1,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_GPIO_LEFT, "gpio_left", "div_aclk_100", GATE_IP_LEFTBUS, 0,
+ CLK_IGNORE_UNUSED, 0),
+
+ /* GATE_IP_RIGHTBUS */
+ GATE(CLK_ASYNC_ISPMX, "async_ispmx", "div_aclk_100",
+ GATE_IP_RIGHTBUS, 9, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ASYNC_FSYSD, "async_fsysd", "div_aclk_100",
+ GATE_IP_RIGHTBUS, 5, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ASYNC_LCD0X, "async_lcd0x", "div_aclk_100",
+ GATE_IP_RIGHTBUS, 3, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ASYNC_CAMX, "async_camx", "div_aclk_100", GATE_IP_RIGHTBUS, 2,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_PPMURIGHT, "ppmuright", "div_aclk_100", GATE_IP_RIGHTBUS, 1,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_GPIO_RIGHT, "gpio_right", "div_aclk_100", GATE_IP_RIGHTBUS, 0,
+ CLK_IGNORE_UNUSED, 0),
+
+ /* GATE_IP_PERIR */
+ GATE(CLK_MONOCNT, "monocnt", "div_aclk_100", GATE_IP_PERIR, 22,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_TZPC6, "tzpc6", "div_aclk_100", GATE_IP_PERIR, 21,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_PROVISIONKEY1, "provisionkey1", "div_aclk_100",
+ GATE_IP_PERIR, 20, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_PROVISIONKEY0, "provisionkey0", "div_aclk_100",
+ GATE_IP_PERIR, 19, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_CMU_ISPPART, "cmu_isppart", "div_aclk_100", GATE_IP_PERIR, 18,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_TMU_APBIF, "tmu_apbif", "div_aclk_100",
+ GATE_IP_PERIR, 17, 0, 0),
+ GATE(CLK_KEYIF, "keyif", "div_aclk_100", GATE_IP_PERIR, 16, 0, 0),
+ GATE(CLK_RTC, "rtc", "div_aclk_100", GATE_IP_PERIR, 15, 0, 0),
+ GATE(CLK_WDT, "wdt", "div_aclk_100", GATE_IP_PERIR, 14, 0, 0),
+ GATE(CLK_MCT, "mct", "div_aclk_100", GATE_IP_PERIR, 13, 0, 0),
+ GATE(CLK_SECKEY, "seckey", "div_aclk_100", GATE_IP_PERIR, 12,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_TZPC5, "tzpc5", "div_aclk_100", GATE_IP_PERIR, 10,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_TZPC4, "tzpc4", "div_aclk_100", GATE_IP_PERIR, 9,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_TZPC3, "tzpc3", "div_aclk_100", GATE_IP_PERIR, 8,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_TZPC2, "tzpc2", "div_aclk_100", GATE_IP_PERIR, 7,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_TZPC1, "tzpc1", "div_aclk_100", GATE_IP_PERIR, 6,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_TZPC0, "tzpc0", "div_aclk_100", GATE_IP_PERIR, 5,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_CMU_COREPART, "cmu_corepart", "div_aclk_100", GATE_IP_PERIR, 4,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_CMU_TOPPART, "cmu_toppart", "div_aclk_100", GATE_IP_PERIR, 3,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_PMU_APBIF, "pmu_apbif", "div_aclk_100", GATE_IP_PERIR, 2,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_SYSREG, "sysreg", "div_aclk_100", GATE_IP_PERIR, 1,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_CHIP_ID, "chip_id", "div_aclk_100", GATE_IP_PERIR, 0,
+ CLK_IGNORE_UNUSED, 0),
+
+ /* GATE_SCLK_CAM */
+ GATE(CLK_SCLK_JPEG, "sclk_jpeg", "div_cam_blk",
+ GATE_SCLK_CAM, 8, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_SCLK_M2MSCALER, "sclk_m2mscaler", "div_cam_blk",
+ GATE_SCLK_CAM, 2, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_SCLK_GSCALER1, "sclk_gscaler1", "div_cam_blk",
+ GATE_SCLK_CAM, 1, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_SCLK_GSCALER0, "sclk_gscaler0", "div_cam_blk",
+ GATE_SCLK_CAM, 0, CLK_SET_RATE_PARENT, 0),
+
+ /* GATE_SCLK_MFC */
+ GATE(CLK_SCLK_MFC, "sclk_mfc", "div_mfc",
+ GATE_SCLK_MFC, 0, CLK_SET_RATE_PARENT, 0),
+
+ /* GATE_SCLK_G3D */
+ GATE(CLK_SCLK_G3D, "sclk_g3d", "div_g3d",
+ GATE_SCLK_G3D, 0, CLK_SET_RATE_PARENT, 0),
+
+ /* GATE_SCLK_LCD */
+ GATE(CLK_SCLK_MIPIDPHY2L, "sclk_mipidphy2l", "div_mipi0",
+ GATE_SCLK_LCD, 4, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_SCLK_MIPI0, "sclk_mipi0", "div_mipi0_pre",
+ GATE_SCLK_LCD, 3, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_SCLK_FIMD0, "sclk_fimd0", "div_fimd0",
+ GATE_SCLK_LCD, 0, CLK_SET_RATE_PARENT, 0),
+
+ /* GATE_SCLK_ISP_TOP */
+ GATE(CLK_SCLK_CAM1, "sclk_cam1", "div_cam1",
+ GATE_SCLK_ISP_TOP, 4, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_SCLK_UART_ISP, "sclk_uart_isp", "div_uart_isp",
+ GATE_SCLK_ISP_TOP, 3, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_SCLK_SPI1_ISP, "sclk_spi1_isp", "div_spi1_isp",
+ GATE_SCLK_ISP_TOP, 2, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_SCLK_SPI0_ISP, "sclk_spi0_isp", "div_spi0_isp",
+ GATE_SCLK_ISP_TOP, 1, CLK_SET_RATE_PARENT, 0),
+
+ /* GATE_SCLK_FSYS */
+ GATE(CLK_SCLK_UPLL, "sclk_upll", "mout_upll", GATE_SCLK_FSYS, 10, 0, 0),
+ GATE(CLK_SCLK_TSADC, "sclk_tsadc", "div_tsadc_pre",
+ GATE_SCLK_FSYS, 9, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_SCLK_EBI, "sclk_ebi", "div_ebi",
+ GATE_SCLK_FSYS, 6, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_SCLK_MMC1, "sclk_mmc1", "div_mmc1_pre",
+ GATE_SCLK_FSYS, 1, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_SCLK_MMC0, "sclk_mmc0", "div_mmc0_pre",
+ GATE_SCLK_FSYS, 0, CLK_SET_RATE_PARENT, 0),
+
+ /* GATE_SCLK_PERIL */
+ GATE(CLK_SCLK_I2S, "sclk_i2s", "div_i2s",
+ GATE_SCLK_PERIL, 18, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_SCLK_PCM, "sclk_pcm", "div_pcm",
+ GATE_SCLK_PERIL, 16, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_SCLK_SPI1, "sclk_spi1", "div_spi1_pre",
+ GATE_SCLK_PERIL, 7, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_SCLK_SPI0, "sclk_spi0", "div_spi0_pre",
+ GATE_SCLK_PERIL, 6, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_SCLK_UART1, "sclk_uart1", "div_uart1",
+ GATE_SCLK_PERIL, 1, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_SCLK_UART0, "sclk_uart0", "div_uart0",
+ GATE_SCLK_PERIL, 0, CLK_SET_RATE_PARENT, 0),
+
+ /* GATE_IP_CAM */
+ GATE(CLK_QEJPEG, "qejpeg", "div_cam_blk_320", GATE_IP_CAM, 19,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_PIXELASYNCM1, "pixelasyncm1", "div_cam_blk_320",
+ GATE_IP_CAM, 18, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_PIXELASYNCM0, "pixelasyncm0", "div_cam_blk_320",
+ GATE_IP_CAM, 17, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_PPMUCAMIF, "ppmucamif", "div_cam_blk_320",
+ GATE_IP_CAM, 16, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_QEM2MSCALER, "qem2mscaler", "div_cam_blk_320",
+ GATE_IP_CAM, 14, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_QEGSCALER1, "qegscaler1", "div_cam_blk_320",
+ GATE_IP_CAM, 13, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_QEGSCALER0, "qegscaler0", "div_cam_blk_320",
+ GATE_IP_CAM, 12, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_SMMUJPEG, "smmujpeg", "div_cam_blk_320",
+ GATE_IP_CAM, 11, 0, 0),
+ GATE(CLK_SMMUM2M2SCALER, "smmum2m2scaler", "div_cam_blk_320",
+ GATE_IP_CAM, 9, 0, 0),
+ GATE(CLK_SMMUGSCALER1, "smmugscaler1", "div_cam_blk_320",
+ GATE_IP_CAM, 8, 0, 0),
+ GATE(CLK_SMMUGSCALER0, "smmugscaler0", "div_cam_blk_320",
+ GATE_IP_CAM, 7, 0, 0),
+ GATE(CLK_JPEG, "jpeg", "div_cam_blk_320", GATE_IP_CAM, 6, 0, 0),
+ GATE(CLK_M2MSCALER, "m2mscaler", "div_cam_blk_320",
+ GATE_IP_CAM, 2, 0, 0),
+ GATE(CLK_GSCALER1, "gscaler1", "div_cam_blk_320", GATE_IP_CAM, 1, 0, 0),
+ GATE(CLK_GSCALER0, "gscaler0", "div_cam_blk_320", GATE_IP_CAM, 0, 0, 0),
+
+ /* GATE_IP_MFC */
+ GATE(CLK_QEMFC, "qemfc", "div_aclk_200", GATE_IP_MFC, 5,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_PPMUMFC_L, "ppmumfc_l", "div_aclk_200", GATE_IP_MFC, 3,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_SMMUMFC_L, "smmumfc_l", "div_aclk_200", GATE_IP_MFC, 1, 0, 0),
+ GATE(CLK_MFC, "mfc", "div_aclk_200", GATE_IP_MFC, 0, 0, 0),
+
+ /* GATE_IP_G3D */
+ GATE(CLK_SMMUG3D, "smmug3d", "div_aclk_200", GATE_IP_G3D, 3, 0, 0),
+ GATE(CLK_QEG3D, "qeg3d", "div_aclk_200", GATE_IP_G3D, 2,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_PPMUG3D, "ppmug3d", "div_aclk_200", GATE_IP_G3D, 1,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_G3D, "g3d", "div_aclk_200", GATE_IP_G3D, 0, 0, 0),
+
+ /* GATE_IP_LCD */
+ GATE(CLK_QE_CH1_LCD, "qe_ch1_lcd", "div_aclk_160", GATE_IP_LCD, 7,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_QE_CH0_LCD, "qe_ch0_lcd", "div_aclk_160", GATE_IP_LCD, 6,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_PPMULCD0, "ppmulcd0", "div_aclk_160", GATE_IP_LCD, 5,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_SMMUFIMD0, "smmufimd0", "div_aclk_160", GATE_IP_LCD, 4, 0, 0),
+ GATE(CLK_DSIM0, "dsim0", "div_aclk_160", GATE_IP_LCD, 3, 0, 0),
+ GATE(CLK_SMIES, "smies", "div_aclk_160", GATE_IP_LCD, 2, 0, 0),
+ GATE(CLK_FIMD0, "fimd0", "div_aclk_160", GATE_IP_LCD, 0, 0, 0),
+
+ /* GATE_IP_ISP */
+ GATE(CLK_CAM1, "cam1", "mout_aclk_266_sub", GATE_IP_ISP, 5, 0, 0),
+ GATE(CLK_UART_ISP_TOP, "uart_isp_top", "mout_aclk_266_sub",
+ GATE_IP_ISP, 3, 0, 0),
+ GATE(CLK_SPI1_ISP_TOP, "spi1_isp_top", "mout_aclk_266_sub",
+ GATE_IP_ISP, 2, 0, 0),
+ GATE(CLK_SPI0_ISP_TOP, "spi0_isp_top", "mout_aclk_266_sub",
+ GATE_IP_ISP, 1, 0, 0),
+
+ /* GATE_IP_FSYS */
+ GATE(CLK_TSADC, "tsadc", "div_aclk_200", GATE_IP_FSYS, 20, 0, 0),
+ GATE(CLK_PPMUFILE, "ppmufile", "div_aclk_200", GATE_IP_FSYS, 17,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_USBOTG, "usbotg", "div_aclk_200", GATE_IP_FSYS, 13, 0, 0),
+ GATE(CLK_USBHOST, "usbhost", "div_aclk_200", GATE_IP_FSYS, 12, 0, 0),
+ GATE(CLK_SROMC, "sromc", "div_aclk_200", GATE_IP_FSYS, 11, 0, 0),
+ GATE(CLK_SDMMC1, "sdmmc1", "div_aclk_200", GATE_IP_FSYS, 6, 0, 0),
+ GATE(CLK_SDMMC0, "sdmmc0", "div_aclk_200", GATE_IP_FSYS, 5, 0, 0),
+ GATE(CLK_PDMA1, "pdma1", "div_aclk_200", GATE_IP_FSYS, 1, 0, 0),
+ GATE(CLK_PDMA0, "pdma0", "div_aclk_200", GATE_IP_FSYS, 0, 0, 0),
+
+ /* GATE_IP_PERIL */
+ GATE(CLK_PWM, "pwm", "div_aclk_100", GATE_IP_PERIL, 24, 0, 0),
+ GATE(CLK_PCM, "pcm", "div_aclk_100", GATE_IP_PERIL, 23, 0, 0),
+ GATE(CLK_I2S, "i2s", "div_aclk_100", GATE_IP_PERIL, 21, 0, 0),
+ GATE(CLK_SPI1, "spi1", "div_aclk_100", GATE_IP_PERIL, 17, 0, 0),
+ GATE(CLK_SPI0, "spi0", "div_aclk_100", GATE_IP_PERIL, 16, 0, 0),
+ GATE(CLK_I2C7, "i2c7", "div_aclk_100", GATE_IP_PERIL, 13, 0, 0),
+ GATE(CLK_I2C6, "i2c6", "div_aclk_100", GATE_IP_PERIL, 12, 0, 0),
+ GATE(CLK_I2C5, "i2c5", "div_aclk_100", GATE_IP_PERIL, 11, 0, 0),
+ GATE(CLK_I2C4, "i2c4", "div_aclk_100", GATE_IP_PERIL, 10, 0, 0),
+ GATE(CLK_I2C3, "i2c3", "div_aclk_100", GATE_IP_PERIL, 9, 0, 0),
+ GATE(CLK_I2C2, "i2c2", "div_aclk_100", GATE_IP_PERIL, 8, 0, 0),
+ GATE(CLK_I2C1, "i2c1", "div_aclk_100", GATE_IP_PERIL, 7, 0, 0),
+ GATE(CLK_I2C0, "i2c0", "div_aclk_100", GATE_IP_PERIL, 6, 0, 0),
+ GATE(CLK_UART1, "uart1", "div_aclk_100", GATE_IP_PERIL, 1, 0, 0),
+ GATE(CLK_UART0, "uart0", "div_aclk_100", GATE_IP_PERIL, 0, 0, 0),
+};
+
+/* APLL & MPLL & BPLL & UPLL */
+static struct samsung_pll_rate_table exynos3250_pll_rates[] = {
+ PLL_35XX_RATE(1200000000, 400, 4, 1),
+ PLL_35XX_RATE(1100000000, 275, 3, 1),
+ PLL_35XX_RATE(1066000000, 533, 6, 1),
+ PLL_35XX_RATE(1000000000, 250, 3, 1),
+ PLL_35XX_RATE( 960000000, 320, 4, 1),
+ PLL_35XX_RATE( 900000000, 300, 4, 1),
+ PLL_35XX_RATE( 850000000, 425, 6, 1),
+ PLL_35XX_RATE( 800000000, 200, 3, 1),
+ PLL_35XX_RATE( 700000000, 175, 3, 1),
+ PLL_35XX_RATE( 667000000, 667, 12, 1),
+ PLL_35XX_RATE( 600000000, 400, 4, 2),
+ PLL_35XX_RATE( 533000000, 533, 6, 2),
+ PLL_35XX_RATE( 520000000, 260, 3, 2),
+ PLL_35XX_RATE( 500000000, 250, 3, 2),
+ PLL_35XX_RATE( 400000000, 200, 3, 2),
+ PLL_35XX_RATE( 200000000, 200, 3, 3),
+ PLL_35XX_RATE( 100000000, 200, 3, 4),
+ { /* sentinel */ }
+};
+
+/* VPLL */
+static struct samsung_pll_rate_table exynos3250_vpll_rates[] = {
+ PLL_36XX_RATE(600000000, 100, 2, 1, 0),
+ PLL_36XX_RATE(533000000, 266, 3, 2, 32768),
+ PLL_36XX_RATE(519230987, 173, 2, 2, 5046),
+ PLL_36XX_RATE(500000000, 250, 3, 2, 0),
+ PLL_36XX_RATE(445500000, 148, 2, 2, 32768),
+ PLL_36XX_RATE(445055007, 148, 2, 2, 23047),
+ PLL_36XX_RATE(400000000, 200, 3, 2, 0),
+ PLL_36XX_RATE(371250000, 123, 2, 2, 49152),
+ PLL_36XX_RATE(370878997, 185, 3, 2, 28803),
+ PLL_36XX_RATE(340000000, 170, 3, 2, 0),
+ PLL_36XX_RATE(335000015, 111, 2, 2, 43691),
+ PLL_36XX_RATE(333000000, 111, 2, 2, 0),
+ PLL_36XX_RATE(330000000, 110, 2, 2, 0),
+ PLL_36XX_RATE(320000015, 106, 2, 2, 43691),
+ PLL_36XX_RATE(300000000, 100, 2, 2, 0),
+ PLL_36XX_RATE(275000000, 275, 3, 3, 0),
+ PLL_36XX_RATE(222750000, 148, 2, 3, 32768),
+ PLL_36XX_RATE(222528007, 148, 2, 3, 23069),
+ PLL_36XX_RATE(160000000, 160, 3, 3, 0),
+ PLL_36XX_RATE(148500000, 99, 2, 3, 0),
+ PLL_36XX_RATE(148352005, 98, 2, 3, 59070),
+ PLL_36XX_RATE(108000000, 144, 2, 4, 0),
+ PLL_36XX_RATE( 74250000, 99, 2, 4, 0),
+ PLL_36XX_RATE( 74176002, 98, 3, 4, 59070),
+ PLL_36XX_RATE( 54054000, 216, 3, 5, 14156),
+ PLL_36XX_RATE( 54000000, 144, 2, 5, 0),
+ { /* sentinel */ }
+};
+
+static struct samsung_pll_clock exynos3250_plls[nr_plls] __initdata = {
+ [apll] = PLL(pll_35xx, CLK_FOUT_APLL, "fout_apll", "fin_pll",
+ APLL_LOCK, APLL_CON0, NULL),
+ [mpll] = PLL(pll_35xx, CLK_FOUT_MPLL, "fout_mpll", "fin_pll",
+ MPLL_LOCK, MPLL_CON0, NULL),
+ [vpll] = PLL(pll_36xx, CLK_FOUT_VPLL, "fout_vpll", "fin_pll",
+ VPLL_LOCK, VPLL_CON0, NULL),
+ [upll] = PLL(pll_35xx, CLK_FOUT_UPLL, "fout_upll", "fin_pll",
+ UPLL_LOCK, UPLL_CON0, NULL),
+};
+
+static void __init exynos3250_cmu_init(struct device_node *np)
+{
+ struct samsung_clk_provider *ctx;
+
+ reg_base = of_iomap(np, 0);
+ if (!reg_base)
+ panic("%s: failed to map registers\n", __func__);
+
+ ctx = samsung_clk_init(np, reg_base, CLK_NR_CLKS);
+ if (!ctx)
+ panic("%s: unable to allocate context.\n", __func__);
+
+ samsung_clk_register_fixed_factor(ctx, fixed_factor_clks,
+ ARRAY_SIZE(fixed_factor_clks));
+
+ exynos3250_plls[apll].rate_table = exynos3250_pll_rates;
+ exynos3250_plls[mpll].rate_table = exynos3250_pll_rates;
+ exynos3250_plls[vpll].rate_table = exynos3250_vpll_rates;
+ exynos3250_plls[upll].rate_table = exynos3250_pll_rates;
+
+ samsung_clk_register_pll(ctx, exynos3250_plls,
+ ARRAY_SIZE(exynos3250_plls), reg_base);
+
+ samsung_clk_register_mux(ctx, mux_clks, ARRAY_SIZE(mux_clks));
+ samsung_clk_register_div(ctx, div_clks, ARRAY_SIZE(div_clks));
+ samsung_clk_register_gate(ctx, gate_clks, ARRAY_SIZE(gate_clks));
+
+ exynos3250_clk_sleep_init();
+}
+CLK_OF_DECLARE(exynos3250_cmu, "samsung,exynos3250-cmu", exynos3250_cmu_init);
diff --git a/drivers/clk/samsung/clk-exynos4.c b/drivers/clk/samsung/clk-exynos4.c
index b4f967210175..c4df294bb7fb 100644
--- a/drivers/clk/samsung/clk-exynos4.c
+++ b/drivers/clk/samsung/clk-exynos4.c
@@ -428,7 +428,7 @@ static struct samsung_fixed_rate_clock exynos4_fixed_rate_ext_clks[] __initdata
/* fixed rate clocks generated inside the soc */
static struct samsung_fixed_rate_clock exynos4_fixed_rate_clks[] __initdata = {
FRATE(0, "sclk_hdmi24m", NULL, CLK_IS_ROOT, 24000000),
- FRATE(0, "sclk_hdmiphy", NULL, CLK_IS_ROOT, 27000000),
+ FRATE(CLK_SCLK_HDMIPHY, "sclk_hdmiphy", NULL, CLK_IS_ROOT, 27000000),
FRATE(0, "sclk_usbphy0", NULL, CLK_IS_ROOT, 48000000),
};
@@ -903,7 +903,7 @@ static struct samsung_gate_clock exynos4x12_gate_clks[] __initdata = {
GATE(CLK_AUDSS, "audss", "sclk_epll", E4X12_GATE_IP_MAUDIO, 0, 0, 0),
GATE(CLK_MDNIE0, "mdnie0", "aclk160", GATE_IP_LCD0, 2, 0, 0),
GATE(CLK_ROTATOR, "rotator", "aclk200", E4X12_GATE_IP_IMAGE, 1, 0, 0),
- GATE(CLK_MDMA2, "mdma2", "aclk200", E4X12_GATE_IP_IMAGE, 2, 0, 0),
+ GATE(CLK_MDMA, "mdma", "aclk200", E4X12_GATE_IP_IMAGE, 2, 0, 0),
GATE(CLK_SMMU_MDMA, "smmu_mdma", "aclk200", E4X12_GATE_IP_IMAGE, 5, 0,
0),
GATE(CLK_MIPI_HSI, "mipi_hsi", "aclk133", GATE_IP_FSYS, 10, 0, 0),
@@ -1043,7 +1043,7 @@ static unsigned long exynos4_get_xom(void)
return xom;
}
-static void __init exynos4_clk_register_finpll(void)
+static void __init exynos4_clk_register_finpll(struct samsung_clk_provider *ctx)
{
struct samsung_fixed_rate_clock fclk;
struct clk *clk;
@@ -1066,7 +1066,7 @@ static void __init exynos4_clk_register_finpll(void)
fclk.parent_name = NULL;
fclk.flags = CLK_IS_ROOT;
fclk.fixed_rate = finpll_f;
- samsung_clk_register_fixed_rate(&fclk, 1);
+ samsung_clk_register_fixed_rate(ctx, &fclk, 1);
}
@@ -1176,22 +1176,25 @@ static struct samsung_pll_clock exynos4x12_plls[nr_plls] __initdata = {
static void __init exynos4_clk_init(struct device_node *np,
enum exynos4_soc soc)
{
+ struct samsung_clk_provider *ctx;
exynos4_soc = soc;
reg_base = of_iomap(np, 0);
if (!reg_base)
panic("%s: failed to map registers\n", __func__);
- samsung_clk_init(np, reg_base, CLK_NR_CLKS);
+ ctx = samsung_clk_init(np, reg_base, CLK_NR_CLKS);
+ if (!ctx)
+ panic("%s: unable to allocate context.\n", __func__);
- samsung_clk_of_register_fixed_ext(exynos4_fixed_rate_ext_clks,
+ samsung_clk_of_register_fixed_ext(ctx, exynos4_fixed_rate_ext_clks,
ARRAY_SIZE(exynos4_fixed_rate_ext_clks),
ext_clk_match);
- exynos4_clk_register_finpll();
+ exynos4_clk_register_finpll(ctx);
if (exynos4_soc == EXYNOS4210) {
- samsung_clk_register_mux(exynos4210_mux_early,
+ samsung_clk_register_mux(ctx, exynos4210_mux_early,
ARRAY_SIZE(exynos4210_mux_early));
if (_get_rate("fin_pll") == 24000000) {
@@ -1205,7 +1208,7 @@ static void __init exynos4_clk_init(struct device_node *np,
exynos4210_plls[vpll].rate_table =
exynos4210_vpll_rates;
- samsung_clk_register_pll(exynos4210_plls,
+ samsung_clk_register_pll(ctx, exynos4210_plls,
ARRAY_SIZE(exynos4210_plls), reg_base);
} else {
if (_get_rate("fin_pll") == 24000000) {
@@ -1217,42 +1220,42 @@ static void __init exynos4_clk_init(struct device_node *np,
exynos4x12_vpll_rates;
}
- samsung_clk_register_pll(exynos4x12_plls,
+ samsung_clk_register_pll(ctx, exynos4x12_plls,
ARRAY_SIZE(exynos4x12_plls), reg_base);
}
- samsung_clk_register_fixed_rate(exynos4_fixed_rate_clks,
+ samsung_clk_register_fixed_rate(ctx, exynos4_fixed_rate_clks,
ARRAY_SIZE(exynos4_fixed_rate_clks));
- samsung_clk_register_mux(exynos4_mux_clks,
+ samsung_clk_register_mux(ctx, exynos4_mux_clks,
ARRAY_SIZE(exynos4_mux_clks));
- samsung_clk_register_div(exynos4_div_clks,
+ samsung_clk_register_div(ctx, exynos4_div_clks,
ARRAY_SIZE(exynos4_div_clks));
- samsung_clk_register_gate(exynos4_gate_clks,
+ samsung_clk_register_gate(ctx, exynos4_gate_clks,
ARRAY_SIZE(exynos4_gate_clks));
if (exynos4_soc == EXYNOS4210) {
- samsung_clk_register_fixed_rate(exynos4210_fixed_rate_clks,
+ samsung_clk_register_fixed_rate(ctx, exynos4210_fixed_rate_clks,
ARRAY_SIZE(exynos4210_fixed_rate_clks));
- samsung_clk_register_mux(exynos4210_mux_clks,
+ samsung_clk_register_mux(ctx, exynos4210_mux_clks,
ARRAY_SIZE(exynos4210_mux_clks));
- samsung_clk_register_div(exynos4210_div_clks,
+ samsung_clk_register_div(ctx, exynos4210_div_clks,
ARRAY_SIZE(exynos4210_div_clks));
- samsung_clk_register_gate(exynos4210_gate_clks,
+ samsung_clk_register_gate(ctx, exynos4210_gate_clks,
ARRAY_SIZE(exynos4210_gate_clks));
- samsung_clk_register_alias(exynos4210_aliases,
+ samsung_clk_register_alias(ctx, exynos4210_aliases,
ARRAY_SIZE(exynos4210_aliases));
} else {
- samsung_clk_register_mux(exynos4x12_mux_clks,
+ samsung_clk_register_mux(ctx, exynos4x12_mux_clks,
ARRAY_SIZE(exynos4x12_mux_clks));
- samsung_clk_register_div(exynos4x12_div_clks,
+ samsung_clk_register_div(ctx, exynos4x12_div_clks,
ARRAY_SIZE(exynos4x12_div_clks));
- samsung_clk_register_gate(exynos4x12_gate_clks,
+ samsung_clk_register_gate(ctx, exynos4x12_gate_clks,
ARRAY_SIZE(exynos4x12_gate_clks));
- samsung_clk_register_alias(exynos4x12_aliases,
+ samsung_clk_register_alias(ctx, exynos4x12_aliases,
ARRAY_SIZE(exynos4x12_aliases));
}
- samsung_clk_register_alias(exynos4_aliases,
+ samsung_clk_register_alias(ctx, exynos4_aliases,
ARRAY_SIZE(exynos4_aliases));
exynos4_clk_sleep_init();
diff --git a/drivers/clk/samsung/clk-exynos5250.c b/drivers/clk/samsung/clk-exynos5250.c
index e7ee4420da81..870e18b9a687 100644
--- a/drivers/clk/samsung/clk-exynos5250.c
+++ b/drivers/clk/samsung/clk-exynos5250.c
@@ -28,6 +28,8 @@
#define MPLL_CON0 0x4100
#define SRC_CORE1 0x4204
#define GATE_IP_ACP 0x8800
+#define GATE_IP_ISP0 0xc800
+#define GATE_IP_ISP1 0xc804
#define CPLL_LOCK 0x10020
#define EPLL_LOCK 0x10030
#define VPLL_LOCK 0x10040
@@ -37,6 +39,7 @@
#define VPLL_CON0 0x10140
#define GPLL_CON0 0x10150
#define SRC_TOP0 0x10210
+#define SRC_TOP1 0x10214
#define SRC_TOP2 0x10218
#define SRC_TOP3 0x1021c
#define SRC_GSCL 0x10220
@@ -71,6 +74,7 @@
#define GATE_IP_GSCL 0x10920
#define GATE_IP_DISP1 0x10928
#define GATE_IP_MFC 0x1092c
+#define GATE_IP_G3D 0x10930
#define GATE_IP_GEN 0x10934
#define GATE_IP_FSYS 0x10944
#define GATE_IP_PERIC 0x10950
@@ -100,6 +104,7 @@ static unsigned long exynos5250_clk_regs[] __initdata = {
DIV_CPU0,
SRC_CORE1,
SRC_TOP0,
+ SRC_TOP1,
SRC_TOP2,
SRC_TOP3,
SRC_GSCL,
@@ -133,6 +138,7 @@ static unsigned long exynos5250_clk_regs[] __initdata = {
DIV_PERIC5,
GATE_IP_GSCL,
GATE_IP_MFC,
+ GATE_IP_G3D,
GATE_IP_GEN,
GATE_IP_FSYS,
GATE_IP_PERIC,
@@ -141,6 +147,8 @@ static unsigned long exynos5250_clk_regs[] __initdata = {
PLL_DIV2_SEL,
GATE_IP_DISP1,
GATE_IP_ACP,
+ GATE_IP_ISP0,
+ GATE_IP_ISP1,
};
static int exynos5250_clk_suspend(void)
@@ -189,13 +197,16 @@ PNAME(mout_vpllsrc_p) = { "fin_pll", "sclk_hdmi27m" };
PNAME(mout_vpll_p) = { "mout_vpllsrc", "fout_vpll" };
PNAME(mout_cpll_p) = { "fin_pll", "fout_cpll" };
PNAME(mout_epll_p) = { "fin_pll", "fout_epll" };
+PNAME(mout_gpll_p) = { "fin_pll", "fout_gpll" };
PNAME(mout_mpll_user_p) = { "fin_pll", "mout_mpll" };
PNAME(mout_bpll_user_p) = { "fin_pll", "mout_bpll" };
PNAME(mout_aclk166_p) = { "mout_cpll", "mout_mpll_user" };
PNAME(mout_aclk200_p) = { "mout_mpll_user", "mout_bpll_user" };
+PNAME(mout_aclk400_p) = { "mout_aclk400_g3d_mid", "mout_gpll" };
PNAME(mout_aclk200_sub_p) = { "fin_pll", "div_aclk200" };
PNAME(mout_aclk266_sub_p) = { "fin_pll", "div_aclk266" };
PNAME(mout_aclk333_sub_p) = { "fin_pll", "div_aclk333" };
+PNAME(mout_aclk400_isp_sub_p) = { "fin_pll", "div_aclk400_isp" };
PNAME(mout_hdmi_p) = { "div_hdmi_pixel", "sclk_hdmiphy" };
PNAME(mout_usb3_p) = { "mout_mpll_user", "mout_cpll" };
PNAME(mout_group1_p) = { "fin_pll", "fin_pll", "sclk_hdmi27m",
@@ -273,15 +284,23 @@ static struct samsung_mux_clock exynos5250_mux_clks[] __initdata = {
MUX(0, "mout_aclk166", mout_aclk166_p, SRC_TOP0, 8, 1),
MUX(0, "mout_aclk200", mout_aclk200_p, SRC_TOP0, 12, 1),
MUX(0, "mout_aclk333", mout_aclk166_p, SRC_TOP0, 16, 1),
+ MUX(0, "mout_aclk400_g3d_mid", mout_aclk200_p, SRC_TOP0, 20, 1),
+
+ MUX(0, "mout_aclk400_isp", mout_aclk200_p, SRC_TOP1, 24, 1),
+ MUX(0, "mout_aclk400_g3d", mout_aclk400_p, SRC_TOP1, 28, 1),
MUX(0, "mout_cpll", mout_cpll_p, SRC_TOP2, 8, 1),
MUX(0, "mout_epll", mout_epll_p, SRC_TOP2, 12, 1),
MUX(0, "mout_vpll", mout_vpll_p, SRC_TOP2, 16, 1),
MUX(0, "mout_mpll_user", mout_mpll_user_p, SRC_TOP2, 20, 1),
MUX(0, "mout_bpll_user", mout_bpll_user_p, SRC_TOP2, 24, 1),
+ MUX(CLK_MOUT_GPLL, "mout_gpll", mout_gpll_p, SRC_TOP2, 28, 1),
MUX(0, "mout_aclk200_disp1_sub", mout_aclk200_sub_p, SRC_TOP3, 4, 1),
MUX(0, "mout_aclk266_gscl_sub", mout_aclk266_sub_p, SRC_TOP3, 8, 1),
+ MUX(0, "mout_aclk_266_isp_sub", mout_aclk266_sub_p, SRC_TOP3, 16, 1),
+ MUX(0, "mout_aclk_400_isp_sub", mout_aclk400_isp_sub_p,
+ SRC_TOP3, 20, 1),
MUX(0, "mout_aclk333_sub", mout_aclk333_sub_p, SRC_TOP3, 24, 1),
MUX(0, "mout_cam_bayer", mout_group1_p, SRC_GSCL, 12, 4),
@@ -351,7 +370,10 @@ static struct samsung_div_clock exynos5250_div_clks[] __initdata = {
DIV(0, "div_aclk200", "mout_aclk200", DIV_TOP0, 12, 3),
DIV(0, "div_aclk266", "mout_mpll_user", DIV_TOP0, 16, 3),
DIV(0, "div_aclk333", "mout_aclk333", DIV_TOP0, 20, 3),
+ DIV(0, "div_aclk400_g3d", "mout_aclk400_g3d", DIV_TOP0,
+ 24, 3),
+ DIV(0, "div_aclk400_isp", "mout_aclk400_isp", DIV_TOP1, 20, 3),
DIV(0, "div_aclk66_pre", "mout_mpll_user", DIV_TOP1, 24, 3),
DIV(0, "div_cam_bayer", "mout_cam_bayer", DIV_GSCL, 12, 4),
@@ -428,6 +450,7 @@ static struct samsung_gate_clock exynos5250_gate_clks[] __initdata = {
* CMU_ACP
*/
GATE(CLK_MDMA0, "mdma0", "div_aclk266", GATE_IP_ACP, 1, 0, 0),
+ GATE(CLK_SSS, "sss", "div_aclk266", GATE_IP_ACP, 2, 0, 0),
GATE(CLK_G2D, "g2d", "div_aclk200", GATE_IP_ACP, 3, 0, 0),
GATE(CLK_SMMU_MDMA0, "smmu_mdma0", "div_aclk266", GATE_IP_ACP, 5, 0, 0),
@@ -533,7 +556,8 @@ static struct samsung_gate_clock exynos5250_gate_clks[] __initdata = {
0),
GATE(CLK_SMMU_MFCL, "smmu_mfcl", "mout_aclk333_sub", GATE_IP_MFC, 2, 0,
0),
-
+ GATE(CLK_G3D, "g3d", "div_aclk400_g3d", GATE_IP_G3D, 0,
+ CLK_SET_RATE_PARENT, 0),
GATE(CLK_ROTATOR, "rotator", "div_aclk266", GATE_IP_GEN, 1, 0, 0),
GATE(CLK_JPEG, "jpeg", "div_aclk166", GATE_IP_GEN, 2, 0, 0),
GATE(CLK_MDMA1, "mdma1", "div_aclk266", GATE_IP_GEN, 4, 0, 0),
@@ -615,6 +639,31 @@ static struct samsung_gate_clock exynos5250_gate_clks[] __initdata = {
GATE(CLK_WDT, "wdt", "div_aclk66", GATE_IP_PERIS, 19, 0, 0),
GATE(CLK_RTC, "rtc", "div_aclk66", GATE_IP_PERIS, 20, 0, 0),
GATE(CLK_TMU, "tmu", "div_aclk66", GATE_IP_PERIS, 21, 0, 0),
+ GATE(CLK_SMMU_TV, "smmu_tv", "mout_aclk200_disp1_sub",
+ GATE_IP_DISP1, 2, 0, 0),
+ GATE(CLK_SMMU_FIMD1, "smmu_fimd1", "mout_aclk200_disp1_sub",
+ GATE_IP_DISP1, 8, 0, 0),
+ GATE(CLK_SMMU_2D, "smmu_2d", "div_aclk200", GATE_IP_ACP, 7, 0, 0),
+ GATE(CLK_SMMU_FIMC_ISP, "smmu_fimc_isp", "mout_aclk_266_isp_sub",
+ GATE_IP_ISP0, 8, 0, 0),
+ GATE(CLK_SMMU_FIMC_DRC, "smmu_fimc_drc", "mout_aclk_266_isp_sub",
+ GATE_IP_ISP0, 9, 0, 0),
+ GATE(CLK_SMMU_FIMC_FD, "smmu_fimc_fd", "mout_aclk_266_isp_sub",
+ GATE_IP_ISP0, 10, 0, 0),
+ GATE(CLK_SMMU_FIMC_SCC, "smmu_fimc_scc", "mout_aclk_266_isp_sub",
+ GATE_IP_ISP0, 11, 0, 0),
+ GATE(CLK_SMMU_FIMC_SCP, "smmu_fimc_scp", "mout_aclk_266_isp_sub",
+ GATE_IP_ISP0, 12, 0, 0),
+ GATE(CLK_SMMU_FIMC_MCU, "smmu_fimc_mcu", "mout_aclk_400_isp_sub",
+ GATE_IP_ISP0, 13, 0, 0),
+ GATE(CLK_SMMU_FIMC_ODC, "smmu_fimc_odc", "mout_aclk_266_isp_sub",
+ GATE_IP_ISP1, 4, 0, 0),
+ GATE(CLK_SMMU_FIMC_DIS0, "smmu_fimc_dis0", "mout_aclk_266_isp_sub",
+ GATE_IP_ISP1, 5, 0, 0),
+ GATE(CLK_SMMU_FIMC_DIS1, "smmu_fimc_dis1", "mout_aclk_266_isp_sub",
+ GATE_IP_ISP1, 6, 0, 0),
+ GATE(CLK_SMMU_FIMC_3DNR, "smmu_fimc_3dnr", "mout_aclk_266_isp_sub",
+ GATE_IP_ISP1, 7, 0, 0),
};
static struct samsung_pll_rate_table vpll_24mhz_tbl[] __initdata = {
@@ -686,6 +735,8 @@ static struct of_device_id ext_clk_match[] __initdata = {
/* register exynox5250 clocks */
static void __init exynos5250_clk_init(struct device_node *np)
{
+ struct samsung_clk_provider *ctx;
+
if (np) {
reg_base = of_iomap(np, 0);
if (!reg_base)
@@ -694,11 +745,13 @@ static void __init exynos5250_clk_init(struct device_node *np)
panic("%s: unable to determine soc\n", __func__);
}
- samsung_clk_init(np, reg_base, CLK_NR_CLKS);
- samsung_clk_of_register_fixed_ext(exynos5250_fixed_rate_ext_clks,
+ ctx = samsung_clk_init(np, reg_base, CLK_NR_CLKS);
+ if (!ctx)
+ panic("%s: unable to allocate context.\n", __func__);
+ samsung_clk_of_register_fixed_ext(ctx, exynos5250_fixed_rate_ext_clks,
ARRAY_SIZE(exynos5250_fixed_rate_ext_clks),
ext_clk_match);
- samsung_clk_register_mux(exynos5250_pll_pmux_clks,
+ samsung_clk_register_mux(ctx, exynos5250_pll_pmux_clks,
ARRAY_SIZE(exynos5250_pll_pmux_clks));
if (_get_rate("fin_pll") == 24 * MHZ) {
@@ -709,17 +762,18 @@ static void __init exynos5250_clk_init(struct device_node *np)
if (_get_rate("mout_vpllsrc") == 24 * MHZ)
exynos5250_plls[vpll].rate_table = vpll_24mhz_tbl;
- samsung_clk_register_pll(exynos5250_plls, ARRAY_SIZE(exynos5250_plls),
- reg_base);
- samsung_clk_register_fixed_rate(exynos5250_fixed_rate_clks,
+ samsung_clk_register_pll(ctx, exynos5250_plls,
+ ARRAY_SIZE(exynos5250_plls),
+ reg_base);
+ samsung_clk_register_fixed_rate(ctx, exynos5250_fixed_rate_clks,
ARRAY_SIZE(exynos5250_fixed_rate_clks));
- samsung_clk_register_fixed_factor(exynos5250_fixed_factor_clks,
+ samsung_clk_register_fixed_factor(ctx, exynos5250_fixed_factor_clks,
ARRAY_SIZE(exynos5250_fixed_factor_clks));
- samsung_clk_register_mux(exynos5250_mux_clks,
+ samsung_clk_register_mux(ctx, exynos5250_mux_clks,
ARRAY_SIZE(exynos5250_mux_clks));
- samsung_clk_register_div(exynos5250_div_clks,
+ samsung_clk_register_div(ctx, exynos5250_div_clks,
ARRAY_SIZE(exynos5250_div_clks));
- samsung_clk_register_gate(exynos5250_gate_clks,
+ samsung_clk_register_gate(ctx, exynos5250_gate_clks,
ARRAY_SIZE(exynos5250_gate_clks));
exynos5250_clk_sleep_init();
diff --git a/drivers/clk/samsung/clk-exynos5260.c b/drivers/clk/samsung/clk-exynos5260.c
new file mode 100644
index 000000000000..64596ba58df1
--- /dev/null
+++ b/drivers/clk/samsung/clk-exynos5260.c
@@ -0,0 +1,1980 @@
+/*
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ * Author: Rahul Sharma <rahul.sharma@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Common Clock Framework support for Exynos5260 SoC.
+ */
+
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/syscore_ops.h>
+
+#include "clk-exynos5260.h"
+#include "clk.h"
+#include "clk-pll.h"
+
+#include <dt-bindings/clock/exynos5260-clk.h>
+
+static LIST_HEAD(clock_reg_cache_list);
+
+struct exynos5260_clock_reg_cache {
+ struct list_head node;
+ void __iomem *reg_base;
+ struct samsung_clk_reg_dump *rdump;
+ unsigned int rd_num;
+};
+
+struct exynos5260_cmu_info {
+ /* list of pll clocks and respective count */
+ struct samsung_pll_clock *pll_clks;
+ unsigned int nr_pll_clks;
+ /* list of mux clocks and respective count */
+ struct samsung_mux_clock *mux_clks;
+ unsigned int nr_mux_clks;
+ /* list of div clocks and respective count */
+ struct samsung_div_clock *div_clks;
+ unsigned int nr_div_clks;
+ /* list of gate clocks and respective count */
+ struct samsung_gate_clock *gate_clks;
+ unsigned int nr_gate_clks;
+ /* list of fixed clocks and respective count */
+ struct samsung_fixed_rate_clock *fixed_clks;
+ unsigned int nr_fixed_clks;
+ /* total number of clocks with IDs assigned*/
+ unsigned int nr_clk_ids;
+
+ /* list and number of clocks registers */
+ unsigned long *clk_regs;
+ unsigned int nr_clk_regs;
+};
+
+/*
+ * Applicable for all 2550 Type PLLS for Exynos5260, listed below
+ * DISP_PLL, EGL_PLL, KFC_PLL, MEM_PLL, BUS_PLL, MEDIA_PLL, G3D_PLL.
+ */
+static struct samsung_pll_rate_table pll2550_24mhz_tbl[] __initdata = {
+ PLL_35XX_RATE(1700000000, 425, 6, 0),
+ PLL_35XX_RATE(1600000000, 200, 3, 0),
+ PLL_35XX_RATE(1500000000, 250, 4, 0),
+ PLL_35XX_RATE(1400000000, 175, 3, 0),
+ PLL_35XX_RATE(1300000000, 325, 6, 0),
+ PLL_35XX_RATE(1200000000, 400, 4, 1),
+ PLL_35XX_RATE(1100000000, 275, 3, 1),
+ PLL_35XX_RATE(1000000000, 250, 3, 1),
+ PLL_35XX_RATE(933000000, 311, 4, 1),
+ PLL_35XX_RATE(900000000, 300, 4, 1),
+ PLL_35XX_RATE(800000000, 200, 3, 1),
+ PLL_35XX_RATE(733000000, 733, 12, 1),
+ PLL_35XX_RATE(700000000, 175, 3, 1),
+ PLL_35XX_RATE(667000000, 667, 12, 1),
+ PLL_35XX_RATE(633000000, 211, 4, 1),
+ PLL_35XX_RATE(620000000, 310, 3, 2),
+ PLL_35XX_RATE(600000000, 400, 4, 2),
+ PLL_35XX_RATE(543000000, 362, 4, 2),
+ PLL_35XX_RATE(533000000, 533, 6, 2),
+ PLL_35XX_RATE(500000000, 250, 3, 2),
+ PLL_35XX_RATE(450000000, 300, 4, 2),
+ PLL_35XX_RATE(400000000, 200, 3, 2),
+ PLL_35XX_RATE(350000000, 175, 3, 2),
+ PLL_35XX_RATE(300000000, 400, 4, 3),
+ PLL_35XX_RATE(266000000, 266, 3, 3),
+ PLL_35XX_RATE(200000000, 200, 3, 3),
+ PLL_35XX_RATE(160000000, 160, 3, 3),
+};
+
+/*
+ * Applicable for 2650 Type PLL for AUD_PLL.
+ */
+static struct samsung_pll_rate_table pll2650_24mhz_tbl[] __initdata = {
+ PLL_36XX_RATE(1600000000, 200, 3, 0, 0),
+ PLL_36XX_RATE(1200000000, 100, 2, 0, 0),
+ PLL_36XX_RATE(1000000000, 250, 3, 1, 0),
+ PLL_36XX_RATE(800000000, 200, 3, 1, 0),
+ PLL_36XX_RATE(600000000, 100, 2, 1, 0),
+ PLL_36XX_RATE(532000000, 266, 3, 2, 0),
+ PLL_36XX_RATE(480000000, 160, 2, 2, 0),
+ PLL_36XX_RATE(432000000, 144, 2, 2, 0),
+ PLL_36XX_RATE(400000000, 200, 3, 2, 0),
+ PLL_36XX_RATE(394073130, 459, 7, 2, 49282),
+ PLL_36XX_RATE(333000000, 111, 2, 2, 0),
+ PLL_36XX_RATE(300000000, 100, 2, 2, 0),
+ PLL_36XX_RATE(266000000, 266, 3, 3, 0),
+ PLL_36XX_RATE(200000000, 200, 3, 3, 0),
+ PLL_36XX_RATE(166000000, 166, 3, 3, 0),
+ PLL_36XX_RATE(133000000, 266, 3, 4, 0),
+ PLL_36XX_RATE(100000000, 200, 3, 4, 0),
+ PLL_36XX_RATE(66000000, 176, 2, 5, 0),
+};
+
+#ifdef CONFIG_PM_SLEEP
+
+static int exynos5260_clk_suspend(void)
+{
+ struct exynos5260_clock_reg_cache *cache;
+
+ list_for_each_entry(cache, &clock_reg_cache_list, node)
+ samsung_clk_save(cache->reg_base, cache->rdump,
+ cache->rd_num);
+
+ return 0;
+}
+
+static void exynos5260_clk_resume(void)
+{
+ struct exynos5260_clock_reg_cache *cache;
+
+ list_for_each_entry(cache, &clock_reg_cache_list, node)
+ samsung_clk_restore(cache->reg_base, cache->rdump,
+ cache->rd_num);
+}
+
+static struct syscore_ops exynos5260_clk_syscore_ops = {
+ .suspend = exynos5260_clk_suspend,
+ .resume = exynos5260_clk_resume,
+};
+
+static void exynos5260_clk_sleep_init(void __iomem *reg_base,
+ unsigned long *rdump,
+ unsigned long nr_rdump)
+{
+ struct exynos5260_clock_reg_cache *reg_cache;
+
+ reg_cache = kzalloc(sizeof(struct exynos5260_clock_reg_cache),
+ GFP_KERNEL);
+ if (!reg_cache)
+ panic("could not allocate register cache.\n");
+
+ reg_cache->rdump = samsung_clk_alloc_reg_dump(rdump, nr_rdump);
+
+ if (!reg_cache->rdump)
+ panic("could not allocate register dump storage.\n");
+
+ if (list_empty(&clock_reg_cache_list))
+ register_syscore_ops(&exynos5260_clk_syscore_ops);
+
+ reg_cache->rd_num = nr_rdump;
+ reg_cache->reg_base = reg_base;
+ list_add_tail(&reg_cache->node, &clock_reg_cache_list);
+}
+
+#else
+static void exynos5260_clk_sleep_init(void __iomem *reg_base,
+ unsigned long *rdump,
+ unsigned long nr_rdump){}
+#endif
+
+/*
+ * Common function which registers plls, muxes, dividers and gates
+ * for each CMU. It also add CMU register list to register cache.
+ */
+
+void __init exynos5260_cmu_register_one(struct device_node *np,
+ struct exynos5260_cmu_info *cmu)
+{
+ void __iomem *reg_base;
+ struct samsung_clk_provider *ctx;
+
+ reg_base = of_iomap(np, 0);
+ if (!reg_base)
+ panic("%s: failed to map registers\n", __func__);
+
+ ctx = samsung_clk_init(np, reg_base, cmu->nr_clk_ids);
+ if (!ctx)
+ panic("%s: unable to alllocate ctx\n", __func__);
+
+ if (cmu->pll_clks)
+ samsung_clk_register_pll(ctx, cmu->pll_clks, cmu->nr_pll_clks,
+ reg_base);
+ if (cmu->mux_clks)
+ samsung_clk_register_mux(ctx, cmu->mux_clks,
+ cmu->nr_mux_clks);
+ if (cmu->div_clks)
+ samsung_clk_register_div(ctx, cmu->div_clks, cmu->nr_div_clks);
+ if (cmu->gate_clks)
+ samsung_clk_register_gate(ctx, cmu->gate_clks,
+ cmu->nr_gate_clks);
+ if (cmu->fixed_clks)
+ samsung_clk_register_fixed_rate(ctx, cmu->fixed_clks,
+ cmu->nr_fixed_clks);
+ if (cmu->clk_regs)
+ exynos5260_clk_sleep_init(reg_base, cmu->clk_regs,
+ cmu->nr_clk_regs);
+}
+
+
+/* CMU_AUD */
+
+static unsigned long aud_clk_regs[] __initdata = {
+ MUX_SEL_AUD,
+ DIV_AUD0,
+ DIV_AUD1,
+ EN_ACLK_AUD,
+ EN_PCLK_AUD,
+ EN_SCLK_AUD,
+ EN_IP_AUD,
+};
+
+PNAME(mout_aud_pll_user_p) = {"fin_pll", "fout_aud_pll"};
+PNAME(mout_sclk_aud_i2s_p) = {"mout_aud_pll_user", "ioclk_i2s_cdclk"};
+PNAME(mout_sclk_aud_pcm_p) = {"mout_aud_pll_user", "ioclk_pcm_extclk"};
+
+struct samsung_mux_clock aud_mux_clks[] __initdata = {
+ MUX(AUD_MOUT_AUD_PLL_USER, "mout_aud_pll_user", mout_aud_pll_user_p,
+ MUX_SEL_AUD, 0, 1),
+ MUX(AUD_MOUT_SCLK_AUD_I2S, "mout_sclk_aud_i2s", mout_sclk_aud_i2s_p,
+ MUX_SEL_AUD, 4, 1),
+ MUX(AUD_MOUT_SCLK_AUD_PCM, "mout_sclk_aud_pcm", mout_sclk_aud_pcm_p,
+ MUX_SEL_AUD, 8, 1),
+};
+
+struct samsung_div_clock aud_div_clks[] __initdata = {
+ DIV(AUD_DOUT_ACLK_AUD_131, "dout_aclk_aud_131", "mout_aud_pll_user",
+ DIV_AUD0, 0, 4),
+
+ DIV(AUD_DOUT_SCLK_AUD_I2S, "dout_sclk_aud_i2s", "mout_sclk_aud_i2s",
+ DIV_AUD1, 0, 4),
+ DIV(AUD_DOUT_SCLK_AUD_PCM, "dout_sclk_aud_pcm", "mout_sclk_aud_pcm",
+ DIV_AUD1, 4, 8),
+ DIV(AUD_DOUT_SCLK_AUD_UART, "dout_sclk_aud_uart", "mout_aud_pll_user",
+ DIV_AUD1, 12, 4),
+};
+
+struct samsung_gate_clock aud_gate_clks[] __initdata = {
+ GATE(AUD_SCLK_I2S, "sclk_aud_i2s", "dout_sclk_aud_i2s",
+ EN_SCLK_AUD, 0, CLK_SET_RATE_PARENT, 0),
+ GATE(AUD_SCLK_PCM, "sclk_aud_pcm", "dout_sclk_aud_pcm",
+ EN_SCLK_AUD, 1, CLK_SET_RATE_PARENT, 0),
+ GATE(AUD_SCLK_AUD_UART, "sclk_aud_uart", "dout_sclk_aud_uart",
+ EN_SCLK_AUD, 2, CLK_SET_RATE_PARENT, 0),
+
+ GATE(AUD_CLK_SRAMC, "clk_sramc", "dout_aclk_aud_131", EN_IP_AUD,
+ 0, 0, 0),
+ GATE(AUD_CLK_DMAC, "clk_dmac", "dout_aclk_aud_131",
+ EN_IP_AUD, 1, 0, 0),
+ GATE(AUD_CLK_I2S, "clk_i2s", "dout_aclk_aud_131", EN_IP_AUD, 2, 0, 0),
+ GATE(AUD_CLK_PCM, "clk_pcm", "dout_aclk_aud_131", EN_IP_AUD, 3, 0, 0),
+ GATE(AUD_CLK_AUD_UART, "clk_aud_uart", "dout_aclk_aud_131",
+ EN_IP_AUD, 4, 0, 0),
+};
+
+static void __init exynos5260_clk_aud_init(struct device_node *np)
+{
+ struct exynos5260_cmu_info cmu = {0};
+
+ cmu.mux_clks = aud_mux_clks;
+ cmu.nr_mux_clks = ARRAY_SIZE(aud_mux_clks);
+ cmu.div_clks = aud_div_clks;
+ cmu.nr_div_clks = ARRAY_SIZE(aud_div_clks);
+ cmu.gate_clks = aud_gate_clks;
+ cmu.nr_gate_clks = ARRAY_SIZE(aud_gate_clks);
+ cmu.nr_clk_ids = AUD_NR_CLK;
+ cmu.clk_regs = aud_clk_regs;
+ cmu.nr_clk_regs = ARRAY_SIZE(aud_clk_regs);
+
+ exynos5260_cmu_register_one(np, &cmu);
+}
+
+CLK_OF_DECLARE(exynos5260_clk_aud, "samsung,exynos5260-clock-aud",
+ exynos5260_clk_aud_init);
+
+
+/* CMU_DISP */
+
+static unsigned long disp_clk_regs[] __initdata = {
+ MUX_SEL_DISP0,
+ MUX_SEL_DISP1,
+ MUX_SEL_DISP2,
+ MUX_SEL_DISP3,
+ MUX_SEL_DISP4,
+ DIV_DISP,
+ EN_ACLK_DISP,
+ EN_PCLK_DISP,
+ EN_SCLK_DISP0,
+ EN_SCLK_DISP1,
+ EN_IP_DISP,
+ EN_IP_DISP_BUS,
+};
+
+PNAME(mout_phyclk_dptx_phy_ch3_txd_clk_user_p) = {"fin_pll",
+ "phyclk_dptx_phy_ch3_txd_clk"};
+PNAME(mout_phyclk_dptx_phy_ch2_txd_clk_user_p) = {"fin_pll",
+ "phyclk_dptx_phy_ch2_txd_clk"};
+PNAME(mout_phyclk_dptx_phy_ch1_txd_clk_user_p) = {"fin_pll",
+ "phyclk_dptx_phy_ch1_txd_clk"};
+PNAME(mout_phyclk_dptx_phy_ch0_txd_clk_user_p) = {"fin_pll",
+ "phyclk_dptx_phy_ch0_txd_clk"};
+PNAME(mout_aclk_disp_222_user_p) = {"fin_pll", "dout_aclk_disp_222"};
+PNAME(mout_sclk_disp_pixel_user_p) = {"fin_pll", "dout_sclk_disp_pixel"};
+PNAME(mout_aclk_disp_333_user_p) = {"fin_pll", "dout_aclk_disp_333"};
+PNAME(mout_phyclk_hdmi_phy_tmds_clko_user_p) = {"fin_pll",
+ "phyclk_hdmi_phy_tmds_clko"};
+PNAME(mout_phyclk_hdmi_phy_ref_clko_user_p) = {"fin_pll",
+ "phyclk_hdmi_phy_ref_clko"};
+PNAME(mout_phyclk_hdmi_phy_pixel_clko_user_p) = {"fin_pll",
+ "phyclk_hdmi_phy_pixel_clko"};
+PNAME(mout_phyclk_hdmi_link_o_tmds_clkhi_user_p) = {"fin_pll",
+ "phyclk_hdmi_link_o_tmds_clkhi"};
+PNAME(mout_phyclk_mipi_dphy_4l_m_txbyte_clkhs_p) = {"fin_pll",
+ "phyclk_mipi_dphy_4l_m_txbyte_clkhs"};
+PNAME(mout_phyclk_dptx_phy_o_ref_clk_24m_user_p) = {"fin_pll",
+ "phyclk_dptx_phy_o_ref_clk_24m"};
+PNAME(mout_phyclk_dptx_phy_clk_div2_user_p) = {"fin_pll",
+ "phyclk_dptx_phy_clk_div2"};
+PNAME(mout_sclk_hdmi_pixel_p) = {"mout_sclk_disp_pixel_user",
+ "mout_aclk_disp_222_user"};
+PNAME(mout_phyclk_mipi_dphy_4lmrxclk_esc0_user_p) = {"fin_pll",
+ "phyclk_mipi_dphy_4l_m_rxclkesc0"};
+PNAME(mout_sclk_hdmi_spdif_p) = {"fin_pll", "ioclk_spdif_extclk",
+ "dout_aclk_peri_aud", "phyclk_hdmi_phy_ref_cko"};
+
+struct samsung_mux_clock disp_mux_clks[] __initdata = {
+ MUX(DISP_MOUT_ACLK_DISP_333_USER, "mout_aclk_disp_333_user",
+ mout_aclk_disp_333_user_p,
+ MUX_SEL_DISP0, 0, 1),
+ MUX(DISP_MOUT_SCLK_DISP_PIXEL_USER, "mout_sclk_disp_pixel_user",
+ mout_sclk_disp_pixel_user_p,
+ MUX_SEL_DISP0, 4, 1),
+ MUX(DISP_MOUT_ACLK_DISP_222_USER, "mout_aclk_disp_222_user",
+ mout_aclk_disp_222_user_p,
+ MUX_SEL_DISP0, 8, 1),
+ MUX(DISP_MOUT_PHYCLK_DPTX_PHY_CH0_TXD_CLK_USER,
+ "mout_phyclk_dptx_phy_ch0_txd_clk_user",
+ mout_phyclk_dptx_phy_ch0_txd_clk_user_p,
+ MUX_SEL_DISP0, 16, 1),
+ MUX(DISP_MOUT_PHYCLK_DPTX_PHY_CH1_TXD_CLK_USER,
+ "mout_phyclk_dptx_phy_ch1_txd_clk_user",
+ mout_phyclk_dptx_phy_ch1_txd_clk_user_p,
+ MUX_SEL_DISP0, 20, 1),
+ MUX(DISP_MOUT_PHYCLK_DPTX_PHY_CH2_TXD_CLK_USER,
+ "mout_phyclk_dptx_phy_ch2_txd_clk_user",
+ mout_phyclk_dptx_phy_ch2_txd_clk_user_p,
+ MUX_SEL_DISP0, 24, 1),
+ MUX(DISP_MOUT_PHYCLK_DPTX_PHY_CH3_TXD_CLK_USER,
+ "mout_phyclk_dptx_phy_ch3_txd_clk_user",
+ mout_phyclk_dptx_phy_ch3_txd_clk_user_p,
+ MUX_SEL_DISP0, 28, 1),
+
+ MUX(DISP_MOUT_PHYCLK_DPTX_PHY_CLK_DIV2_USER,
+ "mout_phyclk_dptx_phy_clk_div2_user",
+ mout_phyclk_dptx_phy_clk_div2_user_p,
+ MUX_SEL_DISP1, 0, 1),
+ MUX(DISP_MOUT_PHYCLK_DPTX_PHY_O_REF_CLK_24M_USER,
+ "mout_phyclk_dptx_phy_o_ref_clk_24m_user",
+ mout_phyclk_dptx_phy_o_ref_clk_24m_user_p,
+ MUX_SEL_DISP1, 4, 1),
+ MUX(DISP_MOUT_PHYCLK_MIPI_DPHY_4L_M_TXBYTE_CLKHS,
+ "mout_phyclk_mipi_dphy_4l_m_txbyte_clkhs",
+ mout_phyclk_mipi_dphy_4l_m_txbyte_clkhs_p,
+ MUX_SEL_DISP1, 8, 1),
+ MUX(DISP_MOUT_PHYCLK_HDMI_LINK_O_TMDS_CLKHI_USER,
+ "mout_phyclk_hdmi_link_o_tmds_clkhi_user",
+ mout_phyclk_hdmi_link_o_tmds_clkhi_user_p,
+ MUX_SEL_DISP1, 16, 1),
+ MUX(DISP_MOUT_HDMI_PHY_PIXEL,
+ "mout_phyclk_hdmi_phy_pixel_clko_user",
+ mout_phyclk_hdmi_phy_pixel_clko_user_p,
+ MUX_SEL_DISP1, 20, 1),
+ MUX(DISP_MOUT_PHYCLK_HDMI_PHY_REF_CLKO_USER,
+ "mout_phyclk_hdmi_phy_ref_clko_user",
+ mout_phyclk_hdmi_phy_ref_clko_user_p,
+ MUX_SEL_DISP1, 24, 1),
+ MUX(DISP_MOUT_PHYCLK_HDMI_PHY_TMDS_CLKO_USER,
+ "mout_phyclk_hdmi_phy_tmds_clko_user",
+ mout_phyclk_hdmi_phy_tmds_clko_user_p,
+ MUX_SEL_DISP1, 28, 1),
+
+ MUX(DISP_MOUT_PHYCLK_MIPI_DPHY_4LMRXCLK_ESC0_USER,
+ "mout_phyclk_mipi_dphy_4lmrxclk_esc0_user",
+ mout_phyclk_mipi_dphy_4lmrxclk_esc0_user_p,
+ MUX_SEL_DISP2, 0, 1),
+ MUX(DISP_MOUT_SCLK_HDMI_PIXEL, "mout_sclk_hdmi_pixel",
+ mout_sclk_hdmi_pixel_p,
+ MUX_SEL_DISP2, 4, 1),
+
+ MUX(DISP_MOUT_SCLK_HDMI_SPDIF, "mout_sclk_hdmi_spdif",
+ mout_sclk_hdmi_spdif_p,
+ MUX_SEL_DISP4, 4, 2),
+};
+
+struct samsung_div_clock disp_div_clks[] __initdata = {
+ DIV(DISP_DOUT_PCLK_DISP_111, "dout_pclk_disp_111",
+ "mout_aclk_disp_222_user",
+ DIV_DISP, 8, 4),
+ DIV(DISP_DOUT_SCLK_FIMD1_EXTCLKPLL, "dout_sclk_fimd1_extclkpll",
+ "mout_sclk_disp_pixel_user",
+ DIV_DISP, 12, 4),
+ DIV(DISP_DOUT_SCLK_HDMI_PHY_PIXEL_CLKI,
+ "dout_sclk_hdmi_phy_pixel_clki",
+ "mout_sclk_hdmi_pixel",
+ DIV_DISP, 16, 4),
+};
+
+struct samsung_gate_clock disp_gate_clks[] __initdata = {
+ GATE(DISP_MOUT_HDMI_PHY_PIXEL_USER, "sclk_hdmi_link_i_pixel",
+ "mout_phyclk_hdmi_phy_pixel_clko_user",
+ EN_SCLK_DISP0, 26, CLK_SET_RATE_PARENT, 0),
+ GATE(DISP_SCLK_PIXEL, "sclk_hdmi_phy_pixel_clki",
+ "dout_sclk_hdmi_phy_pixel_clki",
+ EN_SCLK_DISP0, 29, CLK_SET_RATE_PARENT, 0),
+
+ GATE(DISP_CLK_DP, "clk_dptx_link", "mout_aclk_disp_222_user",
+ EN_IP_DISP, 4, 0, 0),
+ GATE(DISP_CLK_DPPHY, "clk_dptx_phy", "mout_aclk_disp_222_user",
+ EN_IP_DISP, 5, 0, 0),
+ GATE(DISP_CLK_DSIM1, "clk_dsim1", "mout_aclk_disp_222_user",
+ EN_IP_DISP, 6, 0, 0),
+ GATE(DISP_CLK_FIMD1, "clk_fimd1", "mout_aclk_disp_222_user",
+ EN_IP_DISP, 7, 0, 0),
+ GATE(DISP_CLK_HDMI, "clk_hdmi", "mout_aclk_disp_222_user",
+ EN_IP_DISP, 8, 0, 0),
+ GATE(DISP_CLK_HDMIPHY, "clk_hdmiphy", "mout_aclk_disp_222_user",
+ EN_IP_DISP, 9, 0, 0),
+ GATE(DISP_CLK_MIPIPHY, "clk_mipi_dphy", "mout_aclk_disp_222_user",
+ EN_IP_DISP, 10, 0, 0),
+ GATE(DISP_CLK_MIXER, "clk_mixer", "mout_aclk_disp_222_user",
+ EN_IP_DISP, 11, 0, 0),
+ GATE(DISP_CLK_PIXEL_DISP, "clk_pixel_disp", "mout_aclk_disp_222_user",
+ EN_IP_DISP, 12, CLK_IGNORE_UNUSED, 0),
+ GATE(DISP_CLK_PIXEL_MIXER, "clk_pixel_mixer", "mout_aclk_disp_222_user",
+ EN_IP_DISP, 13, CLK_IGNORE_UNUSED, 0),
+ GATE(DISP_CLK_SMMU_FIMD1M0, "clk_smmu3_fimd1m0",
+ "mout_aclk_disp_222_user",
+ EN_IP_DISP, 22, 0, 0),
+ GATE(DISP_CLK_SMMU_FIMD1M1, "clk_smmu3_fimd1m1",
+ "mout_aclk_disp_222_user",
+ EN_IP_DISP, 23, 0, 0),
+ GATE(DISP_CLK_SMMU_TV, "clk_smmu3_tv", "mout_aclk_disp_222_user",
+ EN_IP_DISP, 25, 0, 0),
+};
+
+static void __init exynos5260_clk_disp_init(struct device_node *np)
+{
+ struct exynos5260_cmu_info cmu = {0};
+
+ cmu.mux_clks = disp_mux_clks;
+ cmu.nr_mux_clks = ARRAY_SIZE(disp_mux_clks);
+ cmu.div_clks = disp_div_clks;
+ cmu.nr_div_clks = ARRAY_SIZE(disp_div_clks);
+ cmu.gate_clks = disp_gate_clks;
+ cmu.nr_gate_clks = ARRAY_SIZE(disp_gate_clks);
+ cmu.nr_clk_ids = DISP_NR_CLK;
+ cmu.clk_regs = disp_clk_regs;
+ cmu.nr_clk_regs = ARRAY_SIZE(disp_clk_regs);
+
+ exynos5260_cmu_register_one(np, &cmu);
+}
+
+CLK_OF_DECLARE(exynos5260_clk_disp, "samsung,exynos5260-clock-disp",
+ exynos5260_clk_disp_init);
+
+
+/* CMU_EGL */
+
+static unsigned long egl_clk_regs[] __initdata = {
+ EGL_PLL_LOCK,
+ EGL_PLL_CON0,
+ EGL_PLL_CON1,
+ EGL_PLL_FREQ_DET,
+ MUX_SEL_EGL,
+ MUX_ENABLE_EGL,
+ DIV_EGL,
+ DIV_EGL_PLL_FDET,
+ EN_ACLK_EGL,
+ EN_PCLK_EGL,
+ EN_SCLK_EGL,
+};
+
+PNAME(mout_egl_b_p) = {"mout_egl_pll", "dout_bus_pll"};
+PNAME(mout_egl_pll_p) = {"fin_pll", "fout_egl_pll"};
+
+struct samsung_mux_clock egl_mux_clks[] __initdata = {
+ MUX(EGL_MOUT_EGL_PLL, "mout_egl_pll", mout_egl_pll_p,
+ MUX_SEL_EGL, 4, 1),
+ MUX(EGL_MOUT_EGL_B, "mout_egl_b", mout_egl_b_p, MUX_SEL_EGL, 16, 1),
+};
+
+struct samsung_div_clock egl_div_clks[] __initdata = {
+ DIV(EGL_DOUT_EGL1, "dout_egl1", "mout_egl_b", DIV_EGL, 0, 3),
+ DIV(EGL_DOUT_EGL2, "dout_egl2", "dout_egl1", DIV_EGL, 4, 3),
+ DIV(EGL_DOUT_ACLK_EGL, "dout_aclk_egl", "dout_egl2", DIV_EGL, 8, 3),
+ DIV(EGL_DOUT_PCLK_EGL, "dout_pclk_egl", "dout_egl_atclk",
+ DIV_EGL, 12, 3),
+ DIV(EGL_DOUT_EGL_ATCLK, "dout_egl_atclk", "dout_egl2", DIV_EGL, 16, 3),
+ DIV(EGL_DOUT_EGL_PCLK_DBG, "dout_egl_pclk_dbg", "dout_egl_atclk",
+ DIV_EGL, 20, 3),
+ DIV(EGL_DOUT_EGL_PLL, "dout_egl_pll", "mout_egl_b", DIV_EGL, 24, 3),
+};
+
+static struct samsung_pll_clock egl_pll_clks[] __initdata = {
+ PLL(pll_2550xx, EGL_FOUT_EGL_PLL, "fout_egl_pll", "fin_pll",
+ EGL_PLL_LOCK, EGL_PLL_CON0,
+ pll2550_24mhz_tbl),
+};
+
+static void __init exynos5260_clk_egl_init(struct device_node *np)
+{
+ struct exynos5260_cmu_info cmu = {0};
+
+ cmu.pll_clks = egl_pll_clks;
+ cmu.nr_pll_clks = ARRAY_SIZE(egl_pll_clks);
+ cmu.mux_clks = egl_mux_clks;
+ cmu.nr_mux_clks = ARRAY_SIZE(egl_mux_clks);
+ cmu.div_clks = egl_div_clks;
+ cmu.nr_div_clks = ARRAY_SIZE(egl_div_clks);
+ cmu.nr_clk_ids = EGL_NR_CLK;
+ cmu.clk_regs = egl_clk_regs;
+ cmu.nr_clk_regs = ARRAY_SIZE(egl_clk_regs);
+
+ exynos5260_cmu_register_one(np, &cmu);
+}
+
+CLK_OF_DECLARE(exynos5260_clk_egl, "samsung,exynos5260-clock-egl",
+ exynos5260_clk_egl_init);
+
+
+/* CMU_FSYS */
+
+static unsigned long fsys_clk_regs[] __initdata = {
+ MUX_SEL_FSYS0,
+ MUX_SEL_FSYS1,
+ EN_ACLK_FSYS,
+ EN_ACLK_FSYS_SECURE_RTIC,
+ EN_ACLK_FSYS_SECURE_SMMU_RTIC,
+ EN_SCLK_FSYS,
+ EN_IP_FSYS,
+ EN_IP_FSYS_SECURE_RTIC,
+ EN_IP_FSYS_SECURE_SMMU_RTIC,
+};
+
+PNAME(mout_phyclk_usbhost20_phyclk_user_p) = {"fin_pll",
+ "phyclk_usbhost20_phy_phyclock"};
+PNAME(mout_phyclk_usbhost20_freeclk_user_p) = {"fin_pll",
+ "phyclk_usbhost20_phy_freeclk"};
+PNAME(mout_phyclk_usbhost20_clk48mohci_user_p) = {"fin_pll",
+ "phyclk_usbhost20_phy_clk48mohci"};
+PNAME(mout_phyclk_usbdrd30_pipe_pclk_user_p) = {"fin_pll",
+ "phyclk_usbdrd30_udrd30_pipe_pclk"};
+PNAME(mout_phyclk_usbdrd30_phyclock_user_p) = {"fin_pll",
+ "phyclk_usbdrd30_udrd30_phyclock"};
+
+struct samsung_mux_clock fsys_mux_clks[] __initdata = {
+ MUX(FSYS_MOUT_PHYCLK_USBDRD30_PHYCLOCK_USER,
+ "mout_phyclk_usbdrd30_phyclock_user",
+ mout_phyclk_usbdrd30_phyclock_user_p,
+ MUX_SEL_FSYS1, 0, 1),
+ MUX(FSYS_MOUT_PHYCLK_USBDRD30_PIPE_PCLK_USER,
+ "mout_phyclk_usbdrd30_pipe_pclk_user",
+ mout_phyclk_usbdrd30_pipe_pclk_user_p,
+ MUX_SEL_FSYS1, 4, 1),
+ MUX(FSYS_MOUT_PHYCLK_USBHOST20_CLK48MOHCI_USER,
+ "mout_phyclk_usbhost20_clk48mohci_user",
+ mout_phyclk_usbhost20_clk48mohci_user_p,
+ MUX_SEL_FSYS1, 8, 1),
+ MUX(FSYS_MOUT_PHYCLK_USBHOST20_FREECLK_USER,
+ "mout_phyclk_usbhost20_freeclk_user",
+ mout_phyclk_usbhost20_freeclk_user_p,
+ MUX_SEL_FSYS1, 12, 1),
+ MUX(FSYS_MOUT_PHYCLK_USBHOST20_PHYCLK_USER,
+ "mout_phyclk_usbhost20_phyclk_user",
+ mout_phyclk_usbhost20_phyclk_user_p,
+ MUX_SEL_FSYS1, 16, 1),
+};
+
+struct samsung_gate_clock fsys_gate_clks[] __initdata = {
+ GATE(FSYS_PHYCLK_USBHOST20, "phyclk_usbhost20_phyclock",
+ "mout_phyclk_usbdrd30_phyclock_user",
+ EN_SCLK_FSYS, 1, 0, 0),
+ GATE(FSYS_PHYCLK_USBDRD30, "phyclk_usbdrd30_udrd30_phyclock_g",
+ "mout_phyclk_usbdrd30_phyclock_user",
+ EN_SCLK_FSYS, 7, 0, 0),
+
+ GATE(FSYS_CLK_MMC0, "clk_mmc0", "dout_aclk_fsys_200",
+ EN_IP_FSYS, 6, 0, 0),
+ GATE(FSYS_CLK_MMC1, "clk_mmc1", "dout_aclk_fsys_200",
+ EN_IP_FSYS, 7, 0, 0),
+ GATE(FSYS_CLK_MMC2, "clk_mmc2", "dout_aclk_fsys_200",
+ EN_IP_FSYS, 8, 0, 0),
+ GATE(FSYS_CLK_PDMA, "clk_pdma", "dout_aclk_fsys_200",
+ EN_IP_FSYS, 9, 0, 0),
+ GATE(FSYS_CLK_SROMC, "clk_sromc", "dout_aclk_fsys_200",
+ EN_IP_FSYS, 13, 0, 0),
+ GATE(FSYS_CLK_USBDRD30, "clk_usbdrd30", "dout_aclk_fsys_200",
+ EN_IP_FSYS, 14, 0, 0),
+ GATE(FSYS_CLK_USBHOST20, "clk_usbhost20", "dout_aclk_fsys_200",
+ EN_IP_FSYS, 15, 0, 0),
+ GATE(FSYS_CLK_USBLINK, "clk_usblink", "dout_aclk_fsys_200",
+ EN_IP_FSYS, 18, 0, 0),
+ GATE(FSYS_CLK_TSI, "clk_tsi", "dout_aclk_fsys_200",
+ EN_IP_FSYS, 20, 0, 0),
+
+ GATE(FSYS_CLK_RTIC, "clk_rtic", "dout_aclk_fsys_200",
+ EN_IP_FSYS_SECURE_RTIC, 11, 0, 0),
+ GATE(FSYS_CLK_SMMU_RTIC, "clk_smmu_rtic", "dout_aclk_fsys_200",
+ EN_IP_FSYS_SECURE_SMMU_RTIC, 12, 0, 0),
+};
+
+static void __init exynos5260_clk_fsys_init(struct device_node *np)
+{
+ struct exynos5260_cmu_info cmu = {0};
+
+ cmu.mux_clks = fsys_mux_clks;
+ cmu.nr_mux_clks = ARRAY_SIZE(fsys_mux_clks);
+ cmu.gate_clks = fsys_gate_clks;
+ cmu.nr_gate_clks = ARRAY_SIZE(fsys_gate_clks);
+ cmu.nr_clk_ids = FSYS_NR_CLK;
+ cmu.clk_regs = fsys_clk_regs;
+ cmu.nr_clk_regs = ARRAY_SIZE(fsys_clk_regs);
+
+ exynos5260_cmu_register_one(np, &cmu);
+}
+
+CLK_OF_DECLARE(exynos5260_clk_fsys, "samsung,exynos5260-clock-fsys",
+ exynos5260_clk_fsys_init);
+
+
+/* CMU_G2D */
+
+static unsigned long g2d_clk_regs[] __initdata = {
+ MUX_SEL_G2D,
+ MUX_STAT_G2D,
+ DIV_G2D,
+ EN_ACLK_G2D,
+ EN_ACLK_G2D_SECURE_SSS,
+ EN_ACLK_G2D_SECURE_SLIM_SSS,
+ EN_ACLK_G2D_SECURE_SMMU_SLIM_SSS,
+ EN_ACLK_G2D_SECURE_SMMU_SSS,
+ EN_ACLK_G2D_SECURE_SMMU_MDMA,
+ EN_ACLK_G2D_SECURE_SMMU_G2D,
+ EN_PCLK_G2D,
+ EN_PCLK_G2D_SECURE_SMMU_SLIM_SSS,
+ EN_PCLK_G2D_SECURE_SMMU_SSS,
+ EN_PCLK_G2D_SECURE_SMMU_MDMA,
+ EN_PCLK_G2D_SECURE_SMMU_G2D,
+ EN_IP_G2D,
+ EN_IP_G2D_SECURE_SSS,
+ EN_IP_G2D_SECURE_SLIM_SSS,
+ EN_IP_G2D_SECURE_SMMU_SLIM_SSS,
+ EN_IP_G2D_SECURE_SMMU_SSS,
+ EN_IP_G2D_SECURE_SMMU_MDMA,
+ EN_IP_G2D_SECURE_SMMU_G2D,
+};
+
+PNAME(mout_aclk_g2d_333_user_p) = {"fin_pll", "dout_aclk_g2d_333"};
+
+struct samsung_mux_clock g2d_mux_clks[] __initdata = {
+ MUX(G2D_MOUT_ACLK_G2D_333_USER, "mout_aclk_g2d_333_user",
+ mout_aclk_g2d_333_user_p,
+ MUX_SEL_G2D, 0, 1),
+};
+
+struct samsung_div_clock g2d_div_clks[] __initdata = {
+ DIV(G2D_DOUT_PCLK_G2D_83, "dout_pclk_g2d_83", "mout_aclk_g2d_333_user",
+ DIV_G2D, 0, 3),
+};
+
+struct samsung_gate_clock g2d_gate_clks[] __initdata = {
+ GATE(G2D_CLK_G2D, "clk_g2d", "mout_aclk_g2d_333_user",
+ EN_IP_G2D, 4, 0, 0),
+ GATE(G2D_CLK_JPEG, "clk_jpeg", "mout_aclk_g2d_333_user",
+ EN_IP_G2D, 5, 0, 0),
+ GATE(G2D_CLK_MDMA, "clk_mdma", "mout_aclk_g2d_333_user",
+ EN_IP_G2D, 6, 0, 0),
+ GATE(G2D_CLK_SMMU3_JPEG, "clk_smmu3_jpeg", "mout_aclk_g2d_333_user",
+ EN_IP_G2D, 16, 0, 0),
+
+ GATE(G2D_CLK_SSS, "clk_sss", "mout_aclk_g2d_333_user",
+ EN_IP_G2D_SECURE_SSS, 17, 0, 0),
+
+ GATE(G2D_CLK_SLIM_SSS, "clk_slim_sss", "mout_aclk_g2d_333_user",
+ EN_IP_G2D_SECURE_SLIM_SSS, 11, 0, 0),
+
+ GATE(G2D_CLK_SMMU_SLIM_SSS, "clk_smmu_slim_sss",
+ "mout_aclk_g2d_333_user",
+ EN_IP_G2D_SECURE_SMMU_SLIM_SSS, 13, 0, 0),
+
+ GATE(G2D_CLK_SMMU_SSS, "clk_smmu_sss", "mout_aclk_g2d_333_user",
+ EN_IP_G2D_SECURE_SMMU_SSS, 14, 0, 0),
+
+ GATE(G2D_CLK_SMMU_MDMA, "clk_smmu_mdma", "mout_aclk_g2d_333_user",
+ EN_IP_G2D_SECURE_SMMU_MDMA, 12, 0, 0),
+
+ GATE(G2D_CLK_SMMU3_G2D, "clk_smmu3_g2d", "mout_aclk_g2d_333_user",
+ EN_IP_G2D_SECURE_SMMU_G2D, 15, 0, 0),
+};
+
+static void __init exynos5260_clk_g2d_init(struct device_node *np)
+{
+ struct exynos5260_cmu_info cmu = {0};
+
+ cmu.mux_clks = g2d_mux_clks;
+ cmu.nr_mux_clks = ARRAY_SIZE(g2d_mux_clks);
+ cmu.div_clks = g2d_div_clks;
+ cmu.nr_div_clks = ARRAY_SIZE(g2d_div_clks);
+ cmu.gate_clks = g2d_gate_clks;
+ cmu.nr_gate_clks = ARRAY_SIZE(g2d_gate_clks);
+ cmu.nr_clk_ids = G2D_NR_CLK;
+ cmu.clk_regs = g2d_clk_regs;
+ cmu.nr_clk_regs = ARRAY_SIZE(g2d_clk_regs);
+
+ exynos5260_cmu_register_one(np, &cmu);
+}
+
+CLK_OF_DECLARE(exynos5260_clk_g2d, "samsung,exynos5260-clock-g2d",
+ exynos5260_clk_g2d_init);
+
+
+/* CMU_G3D */
+
+static unsigned long g3d_clk_regs[] __initdata = {
+ G3D_PLL_LOCK,
+ G3D_PLL_CON0,
+ G3D_PLL_CON1,
+ G3D_PLL_FDET,
+ MUX_SEL_G3D,
+ DIV_G3D,
+ DIV_G3D_PLL_FDET,
+ EN_ACLK_G3D,
+ EN_PCLK_G3D,
+ EN_SCLK_G3D,
+ EN_IP_G3D,
+};
+
+PNAME(mout_g3d_pll_p) = {"fin_pll", "fout_g3d_pll"};
+
+struct samsung_mux_clock g3d_mux_clks[] __initdata = {
+ MUX(G3D_MOUT_G3D_PLL, "mout_g3d_pll", mout_g3d_pll_p,
+ MUX_SEL_G3D, 0, 1),
+};
+
+struct samsung_div_clock g3d_div_clks[] __initdata = {
+ DIV(G3D_DOUT_PCLK_G3D, "dout_pclk_g3d", "dout_aclk_g3d", DIV_G3D, 0, 3),
+ DIV(G3D_DOUT_ACLK_G3D, "dout_aclk_g3d", "mout_g3d_pll", DIV_G3D, 4, 3),
+};
+
+struct samsung_gate_clock g3d_gate_clks[] __initdata = {
+ GATE(G3D_CLK_G3D, "clk_g3d", "dout_aclk_g3d", EN_IP_G3D, 2, 0, 0),
+ GATE(G3D_CLK_G3D_HPM, "clk_g3d_hpm", "dout_aclk_g3d",
+ EN_IP_G3D, 3, 0, 0),
+};
+
+static struct samsung_pll_clock g3d_pll_clks[] __initdata = {
+ PLL(pll_2550, G3D_FOUT_G3D_PLL, "fout_g3d_pll", "fin_pll",
+ G3D_PLL_LOCK, G3D_PLL_CON0,
+ pll2550_24mhz_tbl),
+};
+
+static void __init exynos5260_clk_g3d_init(struct device_node *np)
+{
+ struct exynos5260_cmu_info cmu = {0};
+
+ cmu.pll_clks = g3d_pll_clks;
+ cmu.nr_pll_clks = ARRAY_SIZE(g3d_pll_clks);
+ cmu.mux_clks = g3d_mux_clks;
+ cmu.nr_mux_clks = ARRAY_SIZE(g3d_mux_clks);
+ cmu.div_clks = g3d_div_clks;
+ cmu.nr_div_clks = ARRAY_SIZE(g3d_div_clks);
+ cmu.gate_clks = g3d_gate_clks;
+ cmu.nr_gate_clks = ARRAY_SIZE(g3d_gate_clks);
+ cmu.nr_clk_ids = G3D_NR_CLK;
+ cmu.clk_regs = g3d_clk_regs;
+ cmu.nr_clk_regs = ARRAY_SIZE(g3d_clk_regs);
+
+ exynos5260_cmu_register_one(np, &cmu);
+}
+
+CLK_OF_DECLARE(exynos5260_clk_g3d, "samsung,exynos5260-clock-g3d",
+ exynos5260_clk_g3d_init);
+
+
+/* CMU_GSCL */
+
+static unsigned long gscl_clk_regs[] __initdata = {
+ MUX_SEL_GSCL,
+ DIV_GSCL,
+ EN_ACLK_GSCL,
+ EN_ACLK_GSCL_FIMC,
+ EN_ACLK_GSCL_SECURE_SMMU_GSCL0,
+ EN_ACLK_GSCL_SECURE_SMMU_GSCL1,
+ EN_ACLK_GSCL_SECURE_SMMU_MSCL0,
+ EN_ACLK_GSCL_SECURE_SMMU_MSCL1,
+ EN_PCLK_GSCL,
+ EN_PCLK_GSCL_FIMC,
+ EN_PCLK_GSCL_SECURE_SMMU_GSCL0,
+ EN_PCLK_GSCL_SECURE_SMMU_GSCL1,
+ EN_PCLK_GSCL_SECURE_SMMU_MSCL0,
+ EN_PCLK_GSCL_SECURE_SMMU_MSCL1,
+ EN_SCLK_GSCL,
+ EN_SCLK_GSCL_FIMC,
+ EN_IP_GSCL,
+ EN_IP_GSCL_FIMC,
+ EN_IP_GSCL_SECURE_SMMU_GSCL0,
+ EN_IP_GSCL_SECURE_SMMU_GSCL1,
+ EN_IP_GSCL_SECURE_SMMU_MSCL0,
+ EN_IP_GSCL_SECURE_SMMU_MSCL1,
+};
+
+PNAME(mout_aclk_gscl_333_user_p) = {"fin_pll", "dout_aclk_gscl_333"};
+PNAME(mout_aclk_m2m_400_user_p) = {"fin_pll", "dout_aclk_gscl_400"};
+PNAME(mout_aclk_gscl_fimc_user_p) = {"fin_pll", "dout_aclk_gscl_400"};
+PNAME(mout_aclk_csis_p) = {"dout_aclk_csis_200", "mout_aclk_gscl_fimc_user"};
+
+struct samsung_mux_clock gscl_mux_clks[] __initdata = {
+ MUX(GSCL_MOUT_ACLK_GSCL_333_USER, "mout_aclk_gscl_333_user",
+ mout_aclk_gscl_333_user_p,
+ MUX_SEL_GSCL, 0, 1),
+ MUX(GSCL_MOUT_ACLK_M2M_400_USER, "mout_aclk_m2m_400_user",
+ mout_aclk_m2m_400_user_p,
+ MUX_SEL_GSCL, 4, 1),
+ MUX(GSCL_MOUT_ACLK_GSCL_FIMC_USER, "mout_aclk_gscl_fimc_user",
+ mout_aclk_gscl_fimc_user_p,
+ MUX_SEL_GSCL, 8, 1),
+ MUX(GSCL_MOUT_ACLK_CSIS, "mout_aclk_csis", mout_aclk_csis_p,
+ MUX_SEL_GSCL, 24, 1),
+};
+
+struct samsung_div_clock gscl_div_clks[] __initdata = {
+ DIV(GSCL_DOUT_PCLK_M2M_100, "dout_pclk_m2m_100",
+ "mout_aclk_m2m_400_user",
+ DIV_GSCL, 0, 3),
+ DIV(GSCL_DOUT_ACLK_CSIS_200, "dout_aclk_csis_200",
+ "mout_aclk_m2m_400_user",
+ DIV_GSCL, 4, 3),
+};
+
+struct samsung_gate_clock gscl_gate_clks[] __initdata = {
+ GATE(GSCL_SCLK_CSIS0_WRAP, "sclk_csis0_wrap", "dout_aclk_csis_200",
+ EN_SCLK_GSCL_FIMC, 0, CLK_SET_RATE_PARENT, 0),
+ GATE(GSCL_SCLK_CSIS1_WRAP, "sclk_csis1_wrap", "dout_aclk_csis_200",
+ EN_SCLK_GSCL_FIMC, 1, CLK_SET_RATE_PARENT, 0),
+
+ GATE(GSCL_CLK_GSCL0, "clk_gscl0", "mout_aclk_gscl_333_user",
+ EN_IP_GSCL, 2, 0, 0),
+ GATE(GSCL_CLK_GSCL1, "clk_gscl1", "mout_aclk_gscl_333_user",
+ EN_IP_GSCL, 3, 0, 0),
+ GATE(GSCL_CLK_MSCL0, "clk_mscl0", "mout_aclk_gscl_333_user",
+ EN_IP_GSCL, 4, 0, 0),
+ GATE(GSCL_CLK_MSCL1, "clk_mscl1", "mout_aclk_gscl_333_user",
+ EN_IP_GSCL, 5, 0, 0),
+ GATE(GSCL_CLK_PIXEL_GSCL0, "clk_pixel_gscl0",
+ "mout_aclk_gscl_333_user",
+ EN_IP_GSCL, 8, 0, 0),
+ GATE(GSCL_CLK_PIXEL_GSCL1, "clk_pixel_gscl1",
+ "mout_aclk_gscl_333_user",
+ EN_IP_GSCL, 9, 0, 0),
+
+ GATE(GSCL_CLK_SMMU3_LITE_A, "clk_smmu3_lite_a",
+ "mout_aclk_gscl_fimc_user",
+ EN_IP_GSCL_FIMC, 5, 0, 0),
+ GATE(GSCL_CLK_SMMU3_LITE_B, "clk_smmu3_lite_b",
+ "mout_aclk_gscl_fimc_user",
+ EN_IP_GSCL_FIMC, 6, 0, 0),
+ GATE(GSCL_CLK_SMMU3_LITE_D, "clk_smmu3_lite_d",
+ "mout_aclk_gscl_fimc_user",
+ EN_IP_GSCL_FIMC, 7, 0, 0),
+ GATE(GSCL_CLK_CSIS0, "clk_csis0", "mout_aclk_gscl_fimc_user",
+ EN_IP_GSCL_FIMC, 8, 0, 0),
+ GATE(GSCL_CLK_CSIS1, "clk_csis1", "mout_aclk_gscl_fimc_user",
+ EN_IP_GSCL_FIMC, 9, 0, 0),
+ GATE(GSCL_CLK_FIMC_LITE_A, "clk_fimc_lite_a",
+ "mout_aclk_gscl_fimc_user",
+ EN_IP_GSCL_FIMC, 10, 0, 0),
+ GATE(GSCL_CLK_FIMC_LITE_B, "clk_fimc_lite_b",
+ "mout_aclk_gscl_fimc_user",
+ EN_IP_GSCL_FIMC, 11, 0, 0),
+ GATE(GSCL_CLK_FIMC_LITE_D, "clk_fimc_lite_d",
+ "mout_aclk_gscl_fimc_user",
+ EN_IP_GSCL_FIMC, 12, 0, 0),
+
+ GATE(GSCL_CLK_SMMU3_GSCL0, "clk_smmu3_gscl0",
+ "mout_aclk_gscl_333_user",
+ EN_IP_GSCL_SECURE_SMMU_GSCL0, 17, 0, 0),
+ GATE(GSCL_CLK_SMMU3_GSCL1, "clk_smmu3_gscl1", "mout_aclk_gscl_333_user",
+ EN_IP_GSCL_SECURE_SMMU_GSCL1, 18, 0, 0),
+ GATE(GSCL_CLK_SMMU3_MSCL0, "clk_smmu3_mscl0",
+ "mout_aclk_m2m_400_user",
+ EN_IP_GSCL_SECURE_SMMU_MSCL0, 19, 0, 0),
+ GATE(GSCL_CLK_SMMU3_MSCL1, "clk_smmu3_mscl1",
+ "mout_aclk_m2m_400_user",
+ EN_IP_GSCL_SECURE_SMMU_MSCL1, 20, 0, 0),
+};
+
+static void __init exynos5260_clk_gscl_init(struct device_node *np)
+{
+ struct exynos5260_cmu_info cmu = {0};
+
+ cmu.mux_clks = gscl_mux_clks;
+ cmu.nr_mux_clks = ARRAY_SIZE(gscl_mux_clks);
+ cmu.div_clks = gscl_div_clks;
+ cmu.nr_div_clks = ARRAY_SIZE(gscl_div_clks);
+ cmu.gate_clks = gscl_gate_clks;
+ cmu.nr_gate_clks = ARRAY_SIZE(gscl_gate_clks);
+ cmu.nr_clk_ids = GSCL_NR_CLK;
+ cmu.clk_regs = gscl_clk_regs;
+ cmu.nr_clk_regs = ARRAY_SIZE(gscl_clk_regs);
+
+ exynos5260_cmu_register_one(np, &cmu);
+}
+
+CLK_OF_DECLARE(exynos5260_clk_gscl, "samsung,exynos5260-clock-gscl",
+ exynos5260_clk_gscl_init);
+
+
+/* CMU_ISP */
+
+static unsigned long isp_clk_regs[] __initdata = {
+ MUX_SEL_ISP0,
+ MUX_SEL_ISP1,
+ DIV_ISP,
+ EN_ACLK_ISP0,
+ EN_ACLK_ISP1,
+ EN_PCLK_ISP0,
+ EN_PCLK_ISP1,
+ EN_SCLK_ISP,
+ EN_IP_ISP0,
+ EN_IP_ISP1,
+};
+
+PNAME(mout_isp_400_user_p) = {"fin_pll", "dout_aclk_isp1_400"};
+PNAME(mout_isp_266_user_p) = {"fin_pll", "dout_aclk_isp1_266"};
+
+struct samsung_mux_clock isp_mux_clks[] __initdata = {
+ MUX(ISP_MOUT_ISP_266_USER, "mout_isp_266_user", mout_isp_266_user_p,
+ MUX_SEL_ISP0, 0, 1),
+ MUX(ISP_MOUT_ISP_400_USER, "mout_isp_400_user", mout_isp_400_user_p,
+ MUX_SEL_ISP0, 4, 1),
+};
+
+struct samsung_div_clock isp_div_clks[] __initdata = {
+ DIV(ISP_DOUT_PCLK_ISP_66, "dout_pclk_isp_66", "mout_kfc",
+ DIV_ISP, 0, 3),
+ DIV(ISP_DOUT_PCLK_ISP_133, "dout_pclk_isp_133", "mout_kfc",
+ DIV_ISP, 4, 4),
+ DIV(ISP_DOUT_CA5_ATCLKIN, "dout_ca5_atclkin", "mout_kfc",
+ DIV_ISP, 12, 3),
+ DIV(ISP_DOUT_CA5_PCLKDBG, "dout_ca5_pclkdbg", "mout_kfc",
+ DIV_ISP, 16, 4),
+ DIV(ISP_DOUT_SCLK_MPWM, "dout_sclk_mpwm", "mout_kfc", DIV_ISP, 20, 2),
+};
+
+struct samsung_gate_clock isp_gate_clks[] __initdata = {
+ GATE(ISP_CLK_GIC, "clk_isp_gic", "mout_aclk_isp1_266",
+ EN_IP_ISP0, 15, 0, 0),
+
+ GATE(ISP_CLK_CA5, "clk_isp_ca5", "mout_aclk_isp1_266",
+ EN_IP_ISP1, 1, 0, 0),
+ GATE(ISP_CLK_FIMC_DRC, "clk_isp_fimc_drc", "mout_aclk_isp1_266",
+ EN_IP_ISP1, 2, 0, 0),
+ GATE(ISP_CLK_FIMC_FD, "clk_isp_fimc_fd", "mout_aclk_isp1_266",
+ EN_IP_ISP1, 3, 0, 0),
+ GATE(ISP_CLK_FIMC, "clk_isp_fimc", "mout_aclk_isp1_266",
+ EN_IP_ISP1, 4, 0, 0),
+ GATE(ISP_CLK_FIMC_SCALERC, "clk_isp_fimc_scalerc",
+ "mout_aclk_isp1_266",
+ EN_IP_ISP1, 5, 0, 0),
+ GATE(ISP_CLK_FIMC_SCALERP, "clk_isp_fimc_scalerp",
+ "mout_aclk_isp1_266",
+ EN_IP_ISP1, 6, 0, 0),
+ GATE(ISP_CLK_I2C0, "clk_isp_i2c0", "mout_aclk_isp1_266",
+ EN_IP_ISP1, 7, 0, 0),
+ GATE(ISP_CLK_I2C1, "clk_isp_i2c1", "mout_aclk_isp1_266",
+ EN_IP_ISP1, 8, 0, 0),
+ GATE(ISP_CLK_MCUCTL, "clk_isp_mcuctl", "mout_aclk_isp1_266",
+ EN_IP_ISP1, 9, 0, 0),
+ GATE(ISP_CLK_MPWM, "clk_isp_mpwm", "mout_aclk_isp1_266",
+ EN_IP_ISP1, 10, 0, 0),
+ GATE(ISP_CLK_MTCADC, "clk_isp_mtcadc", "mout_aclk_isp1_266",
+ EN_IP_ISP1, 11, 0, 0),
+ GATE(ISP_CLK_PWM, "clk_isp_pwm", "mout_aclk_isp1_266",
+ EN_IP_ISP1, 14, 0, 0),
+ GATE(ISP_CLK_SMMU_DRC, "clk_smmu_drc", "mout_aclk_isp1_266",
+ EN_IP_ISP1, 21, 0, 0),
+ GATE(ISP_CLK_SMMU_FD, "clk_smmu_fd", "mout_aclk_isp1_266",
+ EN_IP_ISP1, 22, 0, 0),
+ GATE(ISP_CLK_SMMU_ISP, "clk_smmu_isp", "mout_aclk_isp1_266",
+ EN_IP_ISP1, 23, 0, 0),
+ GATE(ISP_CLK_SMMU_ISPCX, "clk_smmu_ispcx", "mout_aclk_isp1_266",
+ EN_IP_ISP1, 24, 0, 0),
+ GATE(ISP_CLK_SMMU_SCALERC, "clk_isp_smmu_scalerc",
+ "mout_aclk_isp1_266",
+ EN_IP_ISP1, 25, 0, 0),
+ GATE(ISP_CLK_SMMU_SCALERP, "clk_isp_smmu_scalerp",
+ "mout_aclk_isp1_266",
+ EN_IP_ISP1, 26, 0, 0),
+ GATE(ISP_CLK_SPI0, "clk_isp_spi0", "mout_aclk_isp1_266",
+ EN_IP_ISP1, 27, 0, 0),
+ GATE(ISP_CLK_SPI1, "clk_isp_spi1", "mout_aclk_isp1_266",
+ EN_IP_ISP1, 28, 0, 0),
+ GATE(ISP_CLK_WDT, "clk_isp_wdt", "mout_aclk_isp1_266",
+ EN_IP_ISP1, 31, 0, 0),
+ GATE(ISP_CLK_UART, "clk_isp_uart", "mout_aclk_isp1_266",
+ EN_IP_ISP1, 30, 0, 0),
+
+ GATE(ISP_SCLK_UART_EXT, "sclk_isp_uart_ext", "fin_pll",
+ EN_SCLK_ISP, 7, CLK_SET_RATE_PARENT, 0),
+ GATE(ISP_SCLK_SPI1_EXT, "sclk_isp_spi1_ext", "fin_pll",
+ EN_SCLK_ISP, 8, CLK_SET_RATE_PARENT, 0),
+ GATE(ISP_SCLK_SPI0_EXT, "sclk_isp_spi0_ext", "fin_pll",
+ EN_SCLK_ISP, 9, CLK_SET_RATE_PARENT, 0),
+};
+
+static void __init exynos5260_clk_isp_init(struct device_node *np)
+{
+ struct exynos5260_cmu_info cmu = {0};
+
+ cmu.mux_clks = isp_mux_clks;
+ cmu.nr_mux_clks = ARRAY_SIZE(isp_mux_clks);
+ cmu.div_clks = isp_div_clks;
+ cmu.nr_div_clks = ARRAY_SIZE(isp_div_clks);
+ cmu.gate_clks = isp_gate_clks;
+ cmu.nr_gate_clks = ARRAY_SIZE(isp_gate_clks);
+ cmu.nr_clk_ids = ISP_NR_CLK;
+ cmu.clk_regs = isp_clk_regs;
+ cmu.nr_clk_regs = ARRAY_SIZE(isp_clk_regs);
+
+ exynos5260_cmu_register_one(np, &cmu);
+}
+
+CLK_OF_DECLARE(exynos5260_clk_isp, "samsung,exynos5260-clock-isp",
+ exynos5260_clk_isp_init);
+
+
+/* CMU_KFC */
+
+static unsigned long kfc_clk_regs[] __initdata = {
+ KFC_PLL_LOCK,
+ KFC_PLL_CON0,
+ KFC_PLL_CON1,
+ KFC_PLL_FDET,
+ MUX_SEL_KFC0,
+ MUX_SEL_KFC2,
+ DIV_KFC,
+ DIV_KFC_PLL_FDET,
+ EN_ACLK_KFC,
+ EN_PCLK_KFC,
+ EN_SCLK_KFC,
+ EN_IP_KFC,
+};
+
+PNAME(mout_kfc_pll_p) = {"fin_pll", "fout_kfc_pll"};
+PNAME(mout_kfc_p) = {"mout_kfc_pll", "dout_media_pll"};
+
+struct samsung_mux_clock kfc_mux_clks[] __initdata = {
+ MUX(KFC_MOUT_KFC_PLL, "mout_kfc_pll", mout_kfc_pll_p,
+ MUX_SEL_KFC0, 0, 1),
+ MUX(KFC_MOUT_KFC, "mout_kfc", mout_kfc_p, MUX_SEL_KFC2, 0, 1),
+};
+
+struct samsung_div_clock kfc_div_clks[] __initdata = {
+ DIV(KFC_DOUT_KFC1, "dout_kfc1", "mout_kfc", DIV_KFC, 0, 3),
+ DIV(KFC_DOUT_KFC2, "dout_kfc2", "dout_kfc1", DIV_KFC, 4, 3),
+ DIV(KFC_DOUT_KFC_ATCLK, "dout_kfc_atclk", "dout_kfc2", DIV_KFC, 8, 3),
+ DIV(KFC_DOUT_KFC_PCLK_DBG, "dout_kfc_pclk_dbg", "dout_kfc2",
+ DIV_KFC, 12, 3),
+ DIV(KFC_DOUT_ACLK_KFC, "dout_aclk_kfc", "dout_kfc2", DIV_KFC, 16, 3),
+ DIV(KFC_DOUT_PCLK_KFC, "dout_pclk_kfc", "dout_kfc2", DIV_KFC, 20, 3),
+ DIV(KFC_DOUT_KFC_PLL, "dout_kfc_pll", "mout_kfc", DIV_KFC, 24, 3),
+};
+
+static struct samsung_pll_clock kfc_pll_clks[] __initdata = {
+ PLL(pll_2550xx, KFC_FOUT_KFC_PLL, "fout_kfc_pll", "fin_pll",
+ KFC_PLL_LOCK, KFC_PLL_CON0,
+ pll2550_24mhz_tbl),
+};
+
+static void __init exynos5260_clk_kfc_init(struct device_node *np)
+{
+ struct exynos5260_cmu_info cmu = {0};
+
+ cmu.pll_clks = kfc_pll_clks;
+ cmu.nr_pll_clks = ARRAY_SIZE(kfc_pll_clks);
+ cmu.mux_clks = kfc_mux_clks;
+ cmu.nr_mux_clks = ARRAY_SIZE(kfc_mux_clks);
+ cmu.div_clks = kfc_div_clks;
+ cmu.nr_div_clks = ARRAY_SIZE(kfc_div_clks);
+ cmu.nr_clk_ids = KFC_NR_CLK;
+ cmu.clk_regs = kfc_clk_regs;
+ cmu.nr_clk_regs = ARRAY_SIZE(kfc_clk_regs);
+
+ exynos5260_cmu_register_one(np, &cmu);
+}
+
+CLK_OF_DECLARE(exynos5260_clk_kfc, "samsung,exynos5260-clock-kfc",
+ exynos5260_clk_kfc_init);
+
+
+/* CMU_MFC */
+
+static unsigned long mfc_clk_regs[] __initdata = {
+ MUX_SEL_MFC,
+ DIV_MFC,
+ EN_ACLK_MFC,
+ EN_ACLK_SECURE_SMMU2_MFC,
+ EN_PCLK_MFC,
+ EN_PCLK_SECURE_SMMU2_MFC,
+ EN_IP_MFC,
+ EN_IP_MFC_SECURE_SMMU2_MFC,
+};
+
+PNAME(mout_aclk_mfc_333_user_p) = {"fin_pll", "dout_aclk_mfc_333"};
+
+struct samsung_mux_clock mfc_mux_clks[] __initdata = {
+ MUX(MFC_MOUT_ACLK_MFC_333_USER, "mout_aclk_mfc_333_user",
+ mout_aclk_mfc_333_user_p,
+ MUX_SEL_MFC, 0, 1),
+};
+
+struct samsung_div_clock mfc_div_clks[] __initdata = {
+ DIV(MFC_DOUT_PCLK_MFC_83, "dout_pclk_mfc_83", "mout_aclk_mfc_333_user",
+ DIV_MFC, 0, 3),
+};
+
+struct samsung_gate_clock mfc_gate_clks[] __initdata = {
+ GATE(MFC_CLK_MFC, "clk_mfc", "mout_aclk_mfc_333_user",
+ EN_IP_MFC, 1, 0, 0),
+ GATE(MFC_CLK_SMMU2_MFCM0, "clk_smmu2_mfcm0", "mout_aclk_mfc_333_user",
+ EN_IP_MFC_SECURE_SMMU2_MFC, 6, 0, 0),
+ GATE(MFC_CLK_SMMU2_MFCM1, "clk_smmu2_mfcm1", "mout_aclk_mfc_333_user",
+ EN_IP_MFC_SECURE_SMMU2_MFC, 7, 0, 0),
+};
+
+static void __init exynos5260_clk_mfc_init(struct device_node *np)
+{
+ struct exynos5260_cmu_info cmu = {0};
+
+ cmu.mux_clks = mfc_mux_clks;
+ cmu.nr_mux_clks = ARRAY_SIZE(mfc_mux_clks);
+ cmu.div_clks = mfc_div_clks;
+ cmu.nr_div_clks = ARRAY_SIZE(mfc_div_clks);
+ cmu.gate_clks = mfc_gate_clks;
+ cmu.nr_gate_clks = ARRAY_SIZE(mfc_gate_clks);
+ cmu.nr_clk_ids = MFC_NR_CLK;
+ cmu.clk_regs = mfc_clk_regs;
+ cmu.nr_clk_regs = ARRAY_SIZE(mfc_clk_regs);
+
+ exynos5260_cmu_register_one(np, &cmu);
+}
+
+CLK_OF_DECLARE(exynos5260_clk_mfc, "samsung,exynos5260-clock-mfc",
+ exynos5260_clk_mfc_init);
+
+
+/* CMU_MIF */
+
+static unsigned long mif_clk_regs[] __initdata = {
+ MEM_PLL_LOCK,
+ BUS_PLL_LOCK,
+ MEDIA_PLL_LOCK,
+ MEM_PLL_CON0,
+ MEM_PLL_CON1,
+ MEM_PLL_FDET,
+ BUS_PLL_CON0,
+ BUS_PLL_CON1,
+ BUS_PLL_FDET,
+ MEDIA_PLL_CON0,
+ MEDIA_PLL_CON1,
+ MEDIA_PLL_FDET,
+ MUX_SEL_MIF,
+ DIV_MIF,
+ DIV_MIF_PLL_FDET,
+ EN_ACLK_MIF,
+ EN_ACLK_MIF_SECURE_DREX1_TZ,
+ EN_ACLK_MIF_SECURE_DREX0_TZ,
+ EN_ACLK_MIF_SECURE_INTMEM,
+ EN_PCLK_MIF,
+ EN_PCLK_MIF_SECURE_MONOCNT,
+ EN_PCLK_MIF_SECURE_RTC_APBIF,
+ EN_PCLK_MIF_SECURE_DREX1_TZ,
+ EN_PCLK_MIF_SECURE_DREX0_TZ,
+ EN_SCLK_MIF,
+ EN_IP_MIF,
+ EN_IP_MIF_SECURE_MONOCNT,
+ EN_IP_MIF_SECURE_RTC_APBIF,
+ EN_IP_MIF_SECURE_DREX1_TZ,
+ EN_IP_MIF_SECURE_DREX0_TZ,
+ EN_IP_MIF_SECURE_INTEMEM,
+};
+
+PNAME(mout_mem_pll_p) = {"fin_pll", "fout_mem_pll"};
+PNAME(mout_bus_pll_p) = {"fin_pll", "fout_bus_pll"};
+PNAME(mout_media_pll_p) = {"fin_pll", "fout_media_pll"};
+PNAME(mout_mif_drex_p) = {"dout_mem_pll", "dout_bus_pll"};
+PNAME(mout_mif_drex2x_p) = {"dout_mem_pll", "dout_bus_pll"};
+PNAME(mout_clkm_phy_p) = {"mout_mif_drex", "dout_media_pll"};
+PNAME(mout_clk2x_phy_p) = {"mout_mif_drex2x", "dout_media_pll"};
+
+struct samsung_mux_clock mif_mux_clks[] __initdata = {
+ MUX(MIF_MOUT_MEM_PLL, "mout_mem_pll", mout_mem_pll_p,
+ MUX_SEL_MIF, 0, 1),
+ MUX(MIF_MOUT_BUS_PLL, "mout_bus_pll", mout_bus_pll_p,
+ MUX_SEL_MIF, 4, 1),
+ MUX(MIF_MOUT_MEDIA_PLL, "mout_media_pll", mout_media_pll_p,
+ MUX_SEL_MIF, 8, 1),
+ MUX(MIF_MOUT_MIF_DREX, "mout_mif_drex", mout_mif_drex_p,
+ MUX_SEL_MIF, 12, 1),
+ MUX(MIF_MOUT_CLKM_PHY, "mout_clkm_phy", mout_clkm_phy_p,
+ MUX_SEL_MIF, 16, 1),
+ MUX(MIF_MOUT_MIF_DREX2X, "mout_mif_drex2x", mout_mif_drex2x_p,
+ MUX_SEL_MIF, 20, 1),
+ MUX(MIF_MOUT_CLK2X_PHY, "mout_clk2x_phy", mout_clk2x_phy_p,
+ MUX_SEL_MIF, 24, 1),
+};
+
+struct samsung_div_clock mif_div_clks[] __initdata = {
+ DIV(MIF_DOUT_MEDIA_PLL, "dout_media_pll", "mout_media_pll",
+ DIV_MIF, 0, 3),
+ DIV(MIF_DOUT_MEM_PLL, "dout_mem_pll", "mout_mem_pll",
+ DIV_MIF, 4, 3),
+ DIV(MIF_DOUT_BUS_PLL, "dout_bus_pll", "mout_bus_pll",
+ DIV_MIF, 8, 3),
+ DIV(MIF_DOUT_CLKM_PHY, "dout_clkm_phy", "mout_clkm_phy",
+ DIV_MIF, 12, 3),
+ DIV(MIF_DOUT_CLK2X_PHY, "dout_clk2x_phy", "mout_clk2x_phy",
+ DIV_MIF, 16, 4),
+ DIV(MIF_DOUT_ACLK_MIF_466, "dout_aclk_mif_466", "dout_clk2x_phy",
+ DIV_MIF, 20, 3),
+ DIV(MIF_DOUT_ACLK_BUS_200, "dout_aclk_bus_200", "dout_bus_pll",
+ DIV_MIF, 24, 3),
+ DIV(MIF_DOUT_ACLK_BUS_100, "dout_aclk_bus_100", "dout_bus_pll",
+ DIV_MIF, 28, 4),
+};
+
+struct samsung_gate_clock mif_gate_clks[] __initdata = {
+ GATE(MIF_CLK_LPDDR3PHY_WRAP0, "clk_lpddr3phy_wrap0", "dout_clk2x_phy",
+ EN_IP_MIF, 12, CLK_IGNORE_UNUSED, 0),
+ GATE(MIF_CLK_LPDDR3PHY_WRAP1, "clk_lpddr3phy_wrap1", "dout_clk2x_phy",
+ EN_IP_MIF, 13, CLK_IGNORE_UNUSED, 0),
+
+ GATE(MIF_CLK_MONOCNT, "clk_monocnt", "dout_aclk_bus_100",
+ EN_IP_MIF_SECURE_MONOCNT, 22,
+ CLK_IGNORE_UNUSED, 0),
+
+ GATE(MIF_CLK_MIF_RTC, "clk_mif_rtc", "dout_aclk_bus_100",
+ EN_IP_MIF_SECURE_RTC_APBIF, 23,
+ CLK_IGNORE_UNUSED, 0),
+
+ GATE(MIF_CLK_DREX1, "clk_drex1", "dout_aclk_mif_466",
+ EN_IP_MIF_SECURE_DREX1_TZ, 9,
+ CLK_IGNORE_UNUSED, 0),
+
+ GATE(MIF_CLK_DREX0, "clk_drex0", "dout_aclk_mif_466",
+ EN_IP_MIF_SECURE_DREX0_TZ, 9,
+ CLK_IGNORE_UNUSED, 0),
+
+ GATE(MIF_CLK_INTMEM, "clk_intmem", "dout_aclk_bus_200",
+ EN_IP_MIF_SECURE_INTEMEM, 11,
+ CLK_IGNORE_UNUSED, 0),
+
+ GATE(MIF_SCLK_LPDDR3PHY_WRAP_U0, "sclk_lpddr3phy_wrap_u0",
+ "dout_clkm_phy", EN_SCLK_MIF, 0,
+ CLK_IGNORE_UNUSED | CLK_SET_RATE_PARENT, 0),
+ GATE(MIF_SCLK_LPDDR3PHY_WRAP_U1, "sclk_lpddr3phy_wrap_u1",
+ "dout_clkm_phy", EN_SCLK_MIF, 1,
+ CLK_IGNORE_UNUSED | CLK_SET_RATE_PARENT, 0),
+};
+
+static struct samsung_pll_clock mif_pll_clks[] __initdata = {
+ PLL(pll_2550xx, MIF_FOUT_MEM_PLL, "fout_mem_pll", "fin_pll",
+ MEM_PLL_LOCK, MEM_PLL_CON0,
+ pll2550_24mhz_tbl),
+ PLL(pll_2550xx, MIF_FOUT_BUS_PLL, "fout_bus_pll", "fin_pll",
+ BUS_PLL_LOCK, BUS_PLL_CON0,
+ pll2550_24mhz_tbl),
+ PLL(pll_2550xx, MIF_FOUT_MEDIA_PLL, "fout_media_pll", "fin_pll",
+ MEDIA_PLL_LOCK, MEDIA_PLL_CON0,
+ pll2550_24mhz_tbl),
+};
+
+static void __init exynos5260_clk_mif_init(struct device_node *np)
+{
+ struct exynos5260_cmu_info cmu = {0};
+
+ cmu.pll_clks = mif_pll_clks;
+ cmu.nr_pll_clks = ARRAY_SIZE(mif_pll_clks);
+ cmu.mux_clks = mif_mux_clks;
+ cmu.nr_mux_clks = ARRAY_SIZE(mif_mux_clks);
+ cmu.div_clks = mif_div_clks;
+ cmu.nr_div_clks = ARRAY_SIZE(mif_div_clks);
+ cmu.gate_clks = mif_gate_clks;
+ cmu.nr_gate_clks = ARRAY_SIZE(mif_gate_clks);
+ cmu.nr_clk_ids = MIF_NR_CLK;
+ cmu.clk_regs = mif_clk_regs;
+ cmu.nr_clk_regs = ARRAY_SIZE(mif_clk_regs);
+
+ exynos5260_cmu_register_one(np, &cmu);
+}
+
+CLK_OF_DECLARE(exynos5260_clk_mif, "samsung,exynos5260-clock-mif",
+ exynos5260_clk_mif_init);
+
+
+/* CMU_PERI */
+
+static unsigned long peri_clk_regs[] __initdata = {
+ MUX_SEL_PERI,
+ MUX_SEL_PERI1,
+ DIV_PERI,
+ EN_PCLK_PERI0,
+ EN_PCLK_PERI1,
+ EN_PCLK_PERI2,
+ EN_PCLK_PERI3,
+ EN_PCLK_PERI_SECURE_CHIPID,
+ EN_PCLK_PERI_SECURE_PROVKEY0,
+ EN_PCLK_PERI_SECURE_PROVKEY1,
+ EN_PCLK_PERI_SECURE_SECKEY,
+ EN_PCLK_PERI_SECURE_ANTIRBKCNT,
+ EN_PCLK_PERI_SECURE_TOP_RTC,
+ EN_PCLK_PERI_SECURE_TZPC,
+ EN_SCLK_PERI,
+ EN_SCLK_PERI_SECURE_TOP_RTC,
+ EN_IP_PERI0,
+ EN_IP_PERI1,
+ EN_IP_PERI2,
+ EN_IP_PERI_SECURE_CHIPID,
+ EN_IP_PERI_SECURE_PROVKEY0,
+ EN_IP_PERI_SECURE_PROVKEY1,
+ EN_IP_PERI_SECURE_SECKEY,
+ EN_IP_PERI_SECURE_ANTIRBKCNT,
+ EN_IP_PERI_SECURE_TOP_RTC,
+ EN_IP_PERI_SECURE_TZPC,
+};
+
+PNAME(mout_sclk_pcm_p) = {"ioclk_pcm_extclk", "fin_pll", "dout_aclk_peri_aud",
+ "phyclk_hdmi_phy_ref_cko"};
+PNAME(mout_sclk_i2scod_p) = {"ioclk_i2s_cdclk", "fin_pll", "dout_aclk_peri_aud",
+ "phyclk_hdmi_phy_ref_cko"};
+PNAME(mout_sclk_spdif_p) = {"ioclk_spdif_extclk", "fin_pll",
+ "dout_aclk_peri_aud", "phyclk_hdmi_phy_ref_cko"};
+
+struct samsung_mux_clock peri_mux_clks[] __initdata = {
+ MUX(PERI_MOUT_SCLK_PCM, "mout_sclk_pcm", mout_sclk_pcm_p,
+ MUX_SEL_PERI1, 4, 2),
+ MUX(PERI_MOUT_SCLK_I2SCOD, "mout_sclk_i2scod", mout_sclk_i2scod_p,
+ MUX_SEL_PERI1, 12, 2),
+ MUX(PERI_MOUT_SCLK_SPDIF, "mout_sclk_spdif", mout_sclk_spdif_p,
+ MUX_SEL_PERI1, 20, 2),
+};
+
+struct samsung_div_clock peri_div_clks[] __initdata = {
+ DIV(PERI_DOUT_PCM, "dout_pcm", "mout_sclk_pcm", DIV_PERI, 0, 8),
+ DIV(PERI_DOUT_I2S, "dout_i2s", "mout_sclk_i2scod", DIV_PERI, 8, 6),
+};
+
+struct samsung_gate_clock peri_gate_clks[] __initdata = {
+ GATE(PERI_SCLK_PCM1, "sclk_pcm1", "dout_pcm", EN_SCLK_PERI, 0,
+ CLK_SET_RATE_PARENT, 0),
+ GATE(PERI_SCLK_I2S, "sclk_i2s", "dout_i2s", EN_SCLK_PERI, 1,
+ CLK_SET_RATE_PARENT, 0),
+ GATE(PERI_SCLK_SPDIF, "sclk_spdif", "dout_sclk_peri_spi0_b",
+ EN_SCLK_PERI, 2, CLK_SET_RATE_PARENT, 0),
+ GATE(PERI_SCLK_SPI0, "sclk_spi0", "dout_sclk_peri_spi0_b",
+ EN_SCLK_PERI, 7, CLK_SET_RATE_PARENT, 0),
+ GATE(PERI_SCLK_SPI1, "sclk_spi1", "dout_sclk_peri_spi1_b",
+ EN_SCLK_PERI, 8, CLK_SET_RATE_PARENT, 0),
+ GATE(PERI_SCLK_SPI2, "sclk_spi2", "dout_sclk_peri_spi2_b",
+ EN_SCLK_PERI, 9, CLK_SET_RATE_PARENT, 0),
+ GATE(PERI_SCLK_UART0, "sclk_uart0", "dout_sclk_peri_uart0",
+ EN_SCLK_PERI, 10, CLK_SET_RATE_PARENT, 0),
+ GATE(PERI_SCLK_UART1, "sclk_uart1", "dout_sclk_peri_uart1",
+ EN_SCLK_PERI, 11, CLK_SET_RATE_PARENT, 0),
+ GATE(PERI_SCLK_UART2, "sclk_uart2", "dout_sclk_peri_uart2",
+ EN_SCLK_PERI, 12, CLK_SET_RATE_PARENT, 0),
+
+ GATE(PERI_CLK_ABB, "clk_abb", "dout_aclk_peri_66",
+ EN_IP_PERI0, 1, 0, 0),
+ GATE(PERI_CLK_EFUSE_WRITER, "clk_efuse_writer", "dout_aclk_peri_66",
+ EN_IP_PERI0, 5, 0, 0),
+ GATE(PERI_CLK_HDMICEC, "clk_hdmicec", "dout_aclk_peri_66",
+ EN_IP_PERI0, 6, 0, 0),
+ GATE(PERI_CLK_I2C10, "clk_i2c10", "dout_aclk_peri_66",
+ EN_IP_PERI0, 7, 0, 0),
+ GATE(PERI_CLK_I2C11, "clk_i2c11", "dout_aclk_peri_66",
+ EN_IP_PERI0, 8, 0, 0),
+ GATE(PERI_CLK_I2C8, "clk_i2c8", "dout_aclk_peri_66",
+ EN_IP_PERI0, 9, 0, 0),
+ GATE(PERI_CLK_I2C9, "clk_i2c9", "dout_aclk_peri_66",
+ EN_IP_PERI0, 10, 0, 0),
+ GATE(PERI_CLK_I2C4, "clk_i2c4", "dout_aclk_peri_66",
+ EN_IP_PERI0, 11, 0, 0),
+ GATE(PERI_CLK_I2C5, "clk_i2c5", "dout_aclk_peri_66",
+ EN_IP_PERI0, 12, 0, 0),
+ GATE(PERI_CLK_I2C6, "clk_i2c6", "dout_aclk_peri_66",
+ EN_IP_PERI0, 13, 0, 0),
+ GATE(PERI_CLK_I2C7, "clk_i2c7", "dout_aclk_peri_66",
+ EN_IP_PERI0, 14, 0, 0),
+ GATE(PERI_CLK_I2CHDMI, "clk_i2chdmi", "dout_aclk_peri_66",
+ EN_IP_PERI0, 15, 0, 0),
+ GATE(PERI_CLK_I2S, "clk_peri_i2s", "dout_aclk_peri_66",
+ EN_IP_PERI0, 16, 0, 0),
+ GATE(PERI_CLK_MCT, "clk_mct", "dout_aclk_peri_66",
+ EN_IP_PERI0, 17, 0, 0),
+ GATE(PERI_CLK_PCM, "clk_peri_pcm", "dout_aclk_peri_66",
+ EN_IP_PERI0, 18, 0, 0),
+ GATE(PERI_CLK_HSIC0, "clk_hsic0", "dout_aclk_peri_66",
+ EN_IP_PERI0, 20, 0, 0),
+ GATE(PERI_CLK_HSIC1, "clk_hsic1", "dout_aclk_peri_66",
+ EN_IP_PERI0, 21, 0, 0),
+ GATE(PERI_CLK_HSIC2, "clk_hsic2", "dout_aclk_peri_66",
+ EN_IP_PERI0, 22, 0, 0),
+ GATE(PERI_CLK_HSIC3, "clk_hsic3", "dout_aclk_peri_66",
+ EN_IP_PERI0, 23, 0, 0),
+ GATE(PERI_CLK_WDT_EGL, "clk_wdt_egl", "dout_aclk_peri_66",
+ EN_IP_PERI0, 24, 0, 0),
+ GATE(PERI_CLK_WDT_KFC, "clk_wdt_kfc", "dout_aclk_peri_66",
+ EN_IP_PERI0, 25, 0, 0),
+
+ GATE(PERI_CLK_UART4, "clk_uart4", "dout_aclk_peri_66",
+ EN_IP_PERI2, 0, 0, 0),
+ GATE(PERI_CLK_PWM, "clk_pwm", "dout_aclk_peri_66",
+ EN_IP_PERI2, 3, 0, 0),
+ GATE(PERI_CLK_SPDIF, "clk_spdif", "dout_aclk_peri_66",
+ EN_IP_PERI2, 6, 0, 0),
+ GATE(PERI_CLK_SPI0, "clk_spi0", "dout_aclk_peri_66",
+ EN_IP_PERI2, 7, 0, 0),
+ GATE(PERI_CLK_SPI1, "clk_spi1", "dout_aclk_peri_66",
+ EN_IP_PERI2, 8, 0, 0),
+ GATE(PERI_CLK_SPI2, "clk_spi2", "dout_aclk_peri_66",
+ EN_IP_PERI2, 9, 0, 0),
+ GATE(PERI_CLK_TMU0, "clk_tmu0", "dout_aclk_peri_66",
+ EN_IP_PERI2, 10, 0, 0),
+ GATE(PERI_CLK_TMU1, "clk_tmu1", "dout_aclk_peri_66",
+ EN_IP_PERI2, 11, 0, 0),
+ GATE(PERI_CLK_TMU2, "clk_tmu2", "dout_aclk_peri_66",
+ EN_IP_PERI2, 12, 0, 0),
+ GATE(PERI_CLK_TMU3, "clk_tmu3", "dout_aclk_peri_66",
+ EN_IP_PERI2, 13, 0, 0),
+ GATE(PERI_CLK_TMU4, "clk_tmu4", "dout_aclk_peri_66",
+ EN_IP_PERI2, 14, 0, 0),
+ GATE(PERI_CLK_ADC, "clk_adc", "dout_aclk_peri_66",
+ EN_IP_PERI2, 18, 0, 0),
+ GATE(PERI_CLK_UART0, "clk_uart0", "dout_aclk_peri_66",
+ EN_IP_PERI2, 19, 0, 0),
+ GATE(PERI_CLK_UART1, "clk_uart1", "dout_aclk_peri_66",
+ EN_IP_PERI2, 20, 0, 0),
+ GATE(PERI_CLK_UART2, "clk_uart2", "dout_aclk_peri_66",
+ EN_IP_PERI2, 21, 0, 0),
+
+ GATE(PERI_CLK_CHIPID, "clk_chipid", "dout_aclk_peri_66",
+ EN_IP_PERI_SECURE_CHIPID, 2, 0, 0),
+
+ GATE(PERI_CLK_PROVKEY0, "clk_provkey0", "dout_aclk_peri_66",
+ EN_IP_PERI_SECURE_PROVKEY0, 1, 0, 0),
+
+ GATE(PERI_CLK_PROVKEY1, "clk_provkey1", "dout_aclk_peri_66",
+ EN_IP_PERI_SECURE_PROVKEY1, 2, 0, 0),
+
+ GATE(PERI_CLK_SECKEY, "clk_seckey", "dout_aclk_peri_66",
+ EN_IP_PERI_SECURE_SECKEY, 5, 0, 0),
+
+ GATE(PERI_CLK_TOP_RTC, "clk_top_rtc", "dout_aclk_peri_66",
+ EN_IP_PERI_SECURE_TOP_RTC, 5, 0, 0),
+
+ GATE(PERI_CLK_TZPC0, "clk_tzpc0", "dout_aclk_peri_66",
+ EN_IP_PERI_SECURE_TZPC, 10, 0, 0),
+ GATE(PERI_CLK_TZPC1, "clk_tzpc1", "dout_aclk_peri_66",
+ EN_IP_PERI_SECURE_TZPC, 11, 0, 0),
+ GATE(PERI_CLK_TZPC2, "clk_tzpc2", "dout_aclk_peri_66",
+ EN_IP_PERI_SECURE_TZPC, 12, 0, 0),
+ GATE(PERI_CLK_TZPC3, "clk_tzpc3", "dout_aclk_peri_66",
+ EN_IP_PERI_SECURE_TZPC, 13, 0, 0),
+ GATE(PERI_CLK_TZPC4, "clk_tzpc4", "dout_aclk_peri_66",
+ EN_IP_PERI_SECURE_TZPC, 14, 0, 0),
+ GATE(PERI_CLK_TZPC5, "clk_tzpc5", "dout_aclk_peri_66",
+ EN_IP_PERI_SECURE_TZPC, 15, 0, 0),
+ GATE(PERI_CLK_TZPC6, "clk_tzpc6", "dout_aclk_peri_66",
+ EN_IP_PERI_SECURE_TZPC, 16, 0, 0),
+ GATE(PERI_CLK_TZPC7, "clk_tzpc7", "dout_aclk_peri_66",
+ EN_IP_PERI_SECURE_TZPC, 17, 0, 0),
+ GATE(PERI_CLK_TZPC8, "clk_tzpc8", "dout_aclk_peri_66",
+ EN_IP_PERI_SECURE_TZPC, 18, 0, 0),
+ GATE(PERI_CLK_TZPC9, "clk_tzpc9", "dout_aclk_peri_66",
+ EN_IP_PERI_SECURE_TZPC, 19, 0, 0),
+ GATE(PERI_CLK_TZPC10, "clk_tzpc10", "dout_aclk_peri_66",
+ EN_IP_PERI_SECURE_TZPC, 20, 0, 0),
+};
+
+static void __init exynos5260_clk_peri_init(struct device_node *np)
+{
+ struct exynos5260_cmu_info cmu = {0};
+
+ cmu.mux_clks = peri_mux_clks;
+ cmu.nr_mux_clks = ARRAY_SIZE(peri_mux_clks);
+ cmu.div_clks = peri_div_clks;
+ cmu.nr_div_clks = ARRAY_SIZE(peri_div_clks);
+ cmu.gate_clks = peri_gate_clks;
+ cmu.nr_gate_clks = ARRAY_SIZE(peri_gate_clks);
+ cmu.nr_clk_ids = PERI_NR_CLK;
+ cmu.clk_regs = peri_clk_regs;
+ cmu.nr_clk_regs = ARRAY_SIZE(peri_clk_regs);
+
+ exynos5260_cmu_register_one(np, &cmu);
+}
+
+CLK_OF_DECLARE(exynos5260_clk_peri, "samsung,exynos5260-clock-peri",
+ exynos5260_clk_peri_init);
+
+
+/* CMU_TOP */
+
+static unsigned long top_clk_regs[] __initdata = {
+ DISP_PLL_LOCK,
+ AUD_PLL_LOCK,
+ DISP_PLL_CON0,
+ DISP_PLL_CON1,
+ DISP_PLL_FDET,
+ AUD_PLL_CON0,
+ AUD_PLL_CON1,
+ AUD_PLL_CON2,
+ AUD_PLL_FDET,
+ MUX_SEL_TOP_PLL0,
+ MUX_SEL_TOP_MFC,
+ MUX_SEL_TOP_G2D,
+ MUX_SEL_TOP_GSCL,
+ MUX_SEL_TOP_ISP10,
+ MUX_SEL_TOP_ISP11,
+ MUX_SEL_TOP_DISP0,
+ MUX_SEL_TOP_DISP1,
+ MUX_SEL_TOP_BUS,
+ MUX_SEL_TOP_PERI0,
+ MUX_SEL_TOP_PERI1,
+ MUX_SEL_TOP_FSYS,
+ DIV_TOP_G2D_MFC,
+ DIV_TOP_GSCL_ISP0,
+ DIV_TOP_ISP10,
+ DIV_TOP_ISP11,
+ DIV_TOP_DISP,
+ DIV_TOP_BUS,
+ DIV_TOP_PERI0,
+ DIV_TOP_PERI1,
+ DIV_TOP_PERI2,
+ DIV_TOP_FSYS0,
+ DIV_TOP_FSYS1,
+ DIV_TOP_HPM,
+ DIV_TOP_PLL_FDET,
+ EN_ACLK_TOP,
+ EN_SCLK_TOP,
+ EN_IP_TOP,
+};
+
+/* fixed rate clocks generated inside the soc */
+struct samsung_fixed_rate_clock fixed_rate_clks[] __initdata = {
+ FRATE(PHYCLK_DPTX_PHY_CH3_TXD_CLK, "phyclk_dptx_phy_ch3_txd_clk", NULL,
+ CLK_IS_ROOT, 270000000),
+ FRATE(PHYCLK_DPTX_PHY_CH2_TXD_CLK, "phyclk_dptx_phy_ch2_txd_clk", NULL,
+ CLK_IS_ROOT, 270000000),
+ FRATE(PHYCLK_DPTX_PHY_CH1_TXD_CLK, "phyclk_dptx_phy_ch1_txd_clk", NULL,
+ CLK_IS_ROOT, 270000000),
+ FRATE(PHYCLK_DPTX_PHY_CH0_TXD_CLK, "phyclk_dptx_phy_ch0_txd_clk", NULL,
+ CLK_IS_ROOT, 270000000),
+ FRATE(phyclk_hdmi_phy_tmds_clko, "phyclk_hdmi_phy_tmds_clko", NULL,
+ CLK_IS_ROOT, 250000000),
+ FRATE(PHYCLK_HDMI_PHY_PIXEL_CLKO, "phyclk_hdmi_phy_pixel_clko", NULL,
+ CLK_IS_ROOT, 1660000000),
+ FRATE(PHYCLK_HDMI_LINK_O_TMDS_CLKHI, "phyclk_hdmi_link_o_tmds_clkhi",
+ NULL, CLK_IS_ROOT, 125000000),
+ FRATE(PHYCLK_MIPI_DPHY_4L_M_TXBYTECLKHS,
+ "phyclk_mipi_dphy_4l_m_txbyteclkhs" , NULL,
+ CLK_IS_ROOT, 187500000),
+ FRATE(PHYCLK_DPTX_PHY_O_REF_CLK_24M, "phyclk_dptx_phy_o_ref_clk_24m",
+ NULL, CLK_IS_ROOT, 24000000),
+ FRATE(PHYCLK_DPTX_PHY_CLK_DIV2, "phyclk_dptx_phy_clk_div2", NULL,
+ CLK_IS_ROOT, 135000000),
+ FRATE(PHYCLK_MIPI_DPHY_4L_M_RXCLKESC0,
+ "phyclk_mipi_dphy_4l_m_rxclkesc0", NULL,
+ CLK_IS_ROOT, 20000000),
+ FRATE(PHYCLK_USBHOST20_PHY_PHYCLOCK, "phyclk_usbhost20_phy_phyclock",
+ NULL, CLK_IS_ROOT, 60000000),
+ FRATE(PHYCLK_USBHOST20_PHY_FREECLK, "phyclk_usbhost20_phy_freeclk",
+ NULL, CLK_IS_ROOT, 60000000),
+ FRATE(PHYCLK_USBHOST20_PHY_CLK48MOHCI,
+ "phyclk_usbhost20_phy_clk48mohci",
+ NULL, CLK_IS_ROOT, 48000000),
+ FRATE(PHYCLK_USBDRD30_UDRD30_PIPE_PCLK,
+ "phyclk_usbdrd30_udrd30_pipe_pclk", NULL,
+ CLK_IS_ROOT, 125000000),
+ FRATE(PHYCLK_USBDRD30_UDRD30_PHYCLOCK,
+ "phyclk_usbdrd30_udrd30_phyclock", NULL,
+ CLK_IS_ROOT, 60000000),
+};
+
+PNAME(mout_memtop_pll_user_p) = {"fin_pll", "dout_mem_pll"};
+PNAME(mout_bustop_pll_user_p) = {"fin_pll", "dout_bus_pll"};
+PNAME(mout_mediatop_pll_user_p) = {"fin_pll", "dout_media_pll"};
+PNAME(mout_audtop_pll_user_p) = {"fin_pll", "mout_aud_pll"};
+PNAME(mout_aud_pll_p) = {"fin_pll", "fout_aud_pll"};
+PNAME(mout_disp_pll_p) = {"fin_pll", "fout_disp_pll"};
+PNAME(mout_mfc_bustop_333_p) = {"mout_bustop_pll_user", "mout_disp_pll"};
+PNAME(mout_aclk_mfc_333_p) = {"mout_mediatop_pll_user", "mout_mfc_bustop_333"};
+PNAME(mout_g2d_bustop_333_p) = {"mout_bustop_pll_user", "mout_disp_pll"};
+PNAME(mout_aclk_g2d_333_p) = {"mout_mediatop_pll_user", "mout_g2d_bustop_333"};
+PNAME(mout_gscl_bustop_333_p) = {"mout_bustop_pll_user", "mout_disp_pll"};
+PNAME(mout_aclk_gscl_333_p) = {"mout_mediatop_pll_user",
+ "mout_gscl_bustop_333"};
+PNAME(mout_m2m_mediatop_400_p) = {"mout_mediatop_pll_user", "mout_disp_pll"};
+PNAME(mout_aclk_gscl_400_p) = {"mout_bustop_pll_user",
+ "mout_m2m_mediatop_400"};
+PNAME(mout_gscl_bustop_fimc_p) = {"mout_bustop_pll_user", "mout_disp_pll"};
+PNAME(mout_aclk_gscl_fimc_p) = {"mout_mediatop_pll_user",
+ "mout_gscl_bustop_fimc"};
+PNAME(mout_isp1_media_266_p) = {"mout_mediatop_pll_user",
+ "mout_memtop_pll_user"};
+PNAME(mout_aclk_isp1_266_p) = {"mout_bustop_pll_user", "mout_isp1_media_266"};
+PNAME(mout_isp1_media_400_p) = {"mout_mediatop_pll_user", "mout_disp_pll"};
+PNAME(mout_aclk_isp1_400_p) = {"mout_bustop_pll_user", "mout_isp1_media_400"};
+PNAME(mout_sclk_isp_spi_p) = {"fin_pll", "mout_bustop_pll_user"};
+PNAME(mout_sclk_isp_uart_p) = {"fin_pll", "mout_bustop_pll_user"};
+PNAME(mout_sclk_isp_sensor_p) = {"fin_pll", "mout_bustop_pll_user"};
+PNAME(mout_disp_disp_333_p) = {"mout_disp_pll", "mout_bustop_pll_user"};
+PNAME(mout_aclk_disp_333_p) = {"mout_mediatop_pll_user", "mout_disp_disp_333"};
+PNAME(mout_disp_disp_222_p) = {"mout_disp_pll", "mout_bustop_pll_user"};
+PNAME(mout_aclk_disp_222_p) = {"mout_mediatop_pll_user", "mout_disp_disp_222"};
+PNAME(mout_disp_media_pixel_p) = {"mout_mediatop_pll_user",
+ "mout_bustop_pll_user"};
+PNAME(mout_sclk_disp_pixel_p) = {"mout_disp_pll", "mout_disp_media_pixel"};
+PNAME(mout_bus_bustop_400_p) = {"mout_bustop_pll_user", "mout_memtop_pll_user"};
+PNAME(mout_bus_bustop_100_p) = {"mout_bustop_pll_user", "mout_memtop_pll_user"};
+PNAME(mout_sclk_peri_spi_clk_p) = {"fin_pll", "mout_bustop_pll_user"};
+PNAME(mout_sclk_peri_uart_uclk_p) = {"fin_pll", "mout_bustop_pll_user"};
+PNAME(mout_sclk_fsys_usb_p) = {"fin_pll", "mout_bustop_pll_user"};
+PNAME(mout_sclk_fsys_mmc_sdclkin_a_p) = {"fin_pll", "mout_bustop_pll_user"};
+PNAME(mout_sclk_fsys_mmc0_sdclkin_b_p) = {"mout_sclk_fsys_mmc0_sdclkin_a",
+ "mout_mediatop_pll_user"};
+PNAME(mout_sclk_fsys_mmc1_sdclkin_b_p) = {"mout_sclk_fsys_mmc1_sdclkin_a",
+ "mout_mediatop_pll_user"};
+PNAME(mout_sclk_fsys_mmc2_sdclkin_b_p) = {"mout_sclk_fsys_mmc2_sdclkin_a",
+ "mout_mediatop_pll_user"};
+
+struct samsung_mux_clock top_mux_clks[] __initdata = {
+ MUX(TOP_MOUT_MEDIATOP_PLL_USER, "mout_mediatop_pll_user",
+ mout_mediatop_pll_user_p,
+ MUX_SEL_TOP_PLL0, 0, 1),
+ MUX(TOP_MOUT_MEMTOP_PLL_USER, "mout_memtop_pll_user",
+ mout_memtop_pll_user_p,
+ MUX_SEL_TOP_PLL0, 4, 1),
+ MUX(TOP_MOUT_BUSTOP_PLL_USER, "mout_bustop_pll_user",
+ mout_bustop_pll_user_p,
+ MUX_SEL_TOP_PLL0, 8, 1),
+ MUX(TOP_MOUT_DISP_PLL, "mout_disp_pll", mout_disp_pll_p,
+ MUX_SEL_TOP_PLL0, 12, 1),
+ MUX(TOP_MOUT_AUD_PLL, "mout_aud_pll", mout_aud_pll_p,
+ MUX_SEL_TOP_PLL0, 16, 1),
+ MUX(TOP_MOUT_AUDTOP_PLL_USER, "mout_audtop_pll_user",
+ mout_audtop_pll_user_p,
+ MUX_SEL_TOP_PLL0, 24, 1),
+
+ MUX(TOP_MOUT_DISP_DISP_333, "mout_disp_disp_333", mout_disp_disp_333_p,
+ MUX_SEL_TOP_DISP0, 0, 1),
+ MUX(TOP_MOUT_ACLK_DISP_333, "mout_aclk_disp_333", mout_aclk_disp_333_p,
+ MUX_SEL_TOP_DISP0, 8, 1),
+ MUX(TOP_MOUT_DISP_DISP_222, "mout_disp_disp_222", mout_disp_disp_222_p,
+ MUX_SEL_TOP_DISP0, 12, 1),
+ MUX(TOP_MOUT_ACLK_DISP_222, "mout_aclk_disp_222", mout_aclk_disp_222_p,
+ MUX_SEL_TOP_DISP0, 20, 1),
+
+ MUX(TOP_MOUT_FIMD1, "mout_sclk_disp_pixel", mout_sclk_disp_pixel_p,
+ MUX_SEL_TOP_DISP1, 0, 1),
+ MUX(TOP_MOUT_DISP_MEDIA_PIXEL, "mout_disp_media_pixel",
+ mout_disp_media_pixel_p,
+ MUX_SEL_TOP_DISP1, 8, 1),
+
+ MUX(TOP_MOUT_SCLK_PERI_SPI2_CLK, "mout_sclk_peri_spi2_clk",
+ mout_sclk_peri_spi_clk_p,
+ MUX_SEL_TOP_PERI1, 0, 1),
+ MUX(TOP_MOUT_SCLK_PERI_SPI1_CLK, "mout_sclk_peri_spi1_clk",
+ mout_sclk_peri_spi_clk_p,
+ MUX_SEL_TOP_PERI1, 4, 1),
+ MUX(TOP_MOUT_SCLK_PERI_SPI0_CLK, "mout_sclk_peri_spi0_clk",
+ mout_sclk_peri_spi_clk_p,
+ MUX_SEL_TOP_PERI1, 8, 1),
+ MUX(TOP_MOUT_SCLK_PERI_UART1_UCLK, "mout_sclk_peri_uart1_uclk",
+ mout_sclk_peri_uart_uclk_p,
+ MUX_SEL_TOP_PERI1, 12, 1),
+ MUX(TOP_MOUT_SCLK_PERI_UART2_UCLK, "mout_sclk_peri_uart2_uclk",
+ mout_sclk_peri_uart_uclk_p,
+ MUX_SEL_TOP_PERI1, 16, 1),
+ MUX(TOP_MOUT_SCLK_PERI_UART0_UCLK, "mout_sclk_peri_uart0_uclk",
+ mout_sclk_peri_uart_uclk_p,
+ MUX_SEL_TOP_PERI1, 20, 1),
+
+
+ MUX(TOP_MOUT_BUS1_BUSTOP_400, "mout_bus1_bustop_400",
+ mout_bus_bustop_400_p,
+ MUX_SEL_TOP_BUS, 0, 1),
+ MUX(TOP_MOUT_BUS1_BUSTOP_100, "mout_bus1_bustop_100",
+ mout_bus_bustop_100_p,
+ MUX_SEL_TOP_BUS, 4, 1),
+ MUX(TOP_MOUT_BUS2_BUSTOP_100, "mout_bus2_bustop_100",
+ mout_bus_bustop_100_p,
+ MUX_SEL_TOP_BUS, 8, 1),
+ MUX(TOP_MOUT_BUS2_BUSTOP_400, "mout_bus2_bustop_400",
+ mout_bus_bustop_400_p,
+ MUX_SEL_TOP_BUS, 12, 1),
+ MUX(TOP_MOUT_BUS3_BUSTOP_400, "mout_bus3_bustop_400",
+ mout_bus_bustop_400_p,
+ MUX_SEL_TOP_BUS, 16, 1),
+ MUX(TOP_MOUT_BUS3_BUSTOP_100, "mout_bus3_bustop_100",
+ mout_bus_bustop_100_p,
+ MUX_SEL_TOP_BUS, 20, 1),
+ MUX(TOP_MOUT_BUS4_BUSTOP_400, "mout_bus4_bustop_400",
+ mout_bus_bustop_400_p,
+ MUX_SEL_TOP_BUS, 24, 1),
+ MUX(TOP_MOUT_BUS4_BUSTOP_100, "mout_bus4_bustop_100",
+ mout_bus_bustop_100_p,
+ MUX_SEL_TOP_BUS, 28, 1),
+
+ MUX(TOP_MOUT_SCLK_FSYS_USB, "mout_sclk_fsys_usb",
+ mout_sclk_fsys_usb_p,
+ MUX_SEL_TOP_FSYS, 0, 1),
+ MUX(TOP_MOUT_SCLK_FSYS_MMC2_SDCLKIN_A, "mout_sclk_fsys_mmc2_sdclkin_a",
+ mout_sclk_fsys_mmc_sdclkin_a_p,
+ MUX_SEL_TOP_FSYS, 4, 1),
+ MUX(TOP_MOUT_SCLK_FSYS_MMC2_SDCLKIN_B, "mout_sclk_fsys_mmc2_sdclkin_b",
+ mout_sclk_fsys_mmc2_sdclkin_b_p,
+ MUX_SEL_TOP_FSYS, 8, 1),
+ MUX(TOP_MOUT_SCLK_FSYS_MMC1_SDCLKIN_A, "mout_sclk_fsys_mmc1_sdclkin_a",
+ mout_sclk_fsys_mmc_sdclkin_a_p,
+ MUX_SEL_TOP_FSYS, 12, 1),
+ MUX(TOP_MOUT_SCLK_FSYS_MMC1_SDCLKIN_B, "mout_sclk_fsys_mmc1_sdclkin_b",
+ mout_sclk_fsys_mmc1_sdclkin_b_p,
+ MUX_SEL_TOP_FSYS, 16, 1),
+ MUX(TOP_MOUT_SCLK_FSYS_MMC0_SDCLKIN_A, "mout_sclk_fsys_mmc0_sdclkin_a",
+ mout_sclk_fsys_mmc_sdclkin_a_p,
+ MUX_SEL_TOP_FSYS, 20, 1),
+ MUX(TOP_MOUT_SCLK_FSYS_MMC0_SDCLKIN_B, "mout_sclk_fsys_mmc0_sdclkin_b",
+ mout_sclk_fsys_mmc0_sdclkin_b_p,
+ MUX_SEL_TOP_FSYS, 24, 1),
+
+ MUX(TOP_MOUT_ISP1_MEDIA_400, "mout_isp1_media_400",
+ mout_isp1_media_400_p,
+ MUX_SEL_TOP_ISP10, 4, 1),
+ MUX(TOP_MOUT_ACLK_ISP1_400, "mout_aclk_isp1_400", mout_aclk_isp1_400_p,
+ MUX_SEL_TOP_ISP10, 8 , 1),
+ MUX(TOP_MOUT_ISP1_MEDIA_266, "mout_isp1_media_266",
+ mout_isp1_media_266_p,
+ MUX_SEL_TOP_ISP10, 16, 1),
+ MUX(TOP_MOUT_ACLK_ISP1_266, "mout_aclk_isp1_266", mout_aclk_isp1_266_p,
+ MUX_SEL_TOP_ISP10, 20, 1),
+
+ MUX(TOP_MOUT_SCLK_ISP1_SPI0, "mout_sclk_isp1_spi0", mout_sclk_isp_spi_p,
+ MUX_SEL_TOP_ISP11, 4, 1),
+ MUX(TOP_MOUT_SCLK_ISP1_SPI1, "mout_sclk_isp1_spi1", mout_sclk_isp_spi_p,
+ MUX_SEL_TOP_ISP11, 8, 1),
+ MUX(TOP_MOUT_SCLK_ISP1_UART, "mout_sclk_isp1_uart",
+ mout_sclk_isp_uart_p,
+ MUX_SEL_TOP_ISP11, 12, 1),
+ MUX(TOP_MOUT_SCLK_ISP1_SENSOR0, "mout_sclk_isp1_sensor0",
+ mout_sclk_isp_sensor_p,
+ MUX_SEL_TOP_ISP11, 16, 1),
+ MUX(TOP_MOUT_SCLK_ISP1_SENSOR1, "mout_sclk_isp1_sensor1",
+ mout_sclk_isp_sensor_p,
+ MUX_SEL_TOP_ISP11, 20, 1),
+ MUX(TOP_MOUT_SCLK_ISP1_SENSOR2, "mout_sclk_isp1_sensor2",
+ mout_sclk_isp_sensor_p,
+ MUX_SEL_TOP_ISP11, 24, 1),
+
+ MUX(TOP_MOUT_MFC_BUSTOP_333, "mout_mfc_bustop_333",
+ mout_mfc_bustop_333_p,
+ MUX_SEL_TOP_MFC, 4, 1),
+ MUX(TOP_MOUT_ACLK_MFC_333, "mout_aclk_mfc_333", mout_aclk_mfc_333_p,
+ MUX_SEL_TOP_MFC, 8, 1),
+
+ MUX(TOP_MOUT_G2D_BUSTOP_333, "mout_g2d_bustop_333",
+ mout_g2d_bustop_333_p,
+ MUX_SEL_TOP_G2D, 4, 1),
+ MUX(TOP_MOUT_ACLK_G2D_333, "mout_aclk_g2d_333", mout_aclk_g2d_333_p,
+ MUX_SEL_TOP_G2D, 8, 1),
+
+ MUX(TOP_MOUT_M2M_MEDIATOP_400, "mout_m2m_mediatop_400",
+ mout_m2m_mediatop_400_p,
+ MUX_SEL_TOP_GSCL, 0, 1),
+ MUX(TOP_MOUT_ACLK_GSCL_400, "mout_aclk_gscl_400",
+ mout_aclk_gscl_400_p,
+ MUX_SEL_TOP_GSCL, 4, 1),
+ MUX(TOP_MOUT_GSCL_BUSTOP_333, "mout_gscl_bustop_333",
+ mout_gscl_bustop_333_p,
+ MUX_SEL_TOP_GSCL, 8, 1),
+ MUX(TOP_MOUT_ACLK_GSCL_333, "mout_aclk_gscl_333",
+ mout_aclk_gscl_333_p,
+ MUX_SEL_TOP_GSCL, 12, 1),
+ MUX(TOP_MOUT_GSCL_BUSTOP_FIMC, "mout_gscl_bustop_fimc",
+ mout_gscl_bustop_fimc_p,
+ MUX_SEL_TOP_GSCL, 16, 1),
+ MUX(TOP_MOUT_ACLK_GSCL_FIMC, "mout_aclk_gscl_fimc",
+ mout_aclk_gscl_fimc_p,
+ MUX_SEL_TOP_GSCL, 20, 1),
+};
+
+struct samsung_div_clock top_div_clks[] __initdata = {
+ DIV(TOP_DOUT_ACLK_G2D_333, "dout_aclk_g2d_333", "mout_aclk_g2d_333",
+ DIV_TOP_G2D_MFC, 0, 3),
+ DIV(TOP_DOUT_ACLK_MFC_333, "dout_aclk_mfc_333", "mout_aclk_mfc_333",
+ DIV_TOP_G2D_MFC, 4, 3),
+
+ DIV(TOP_DOUT_ACLK_GSCL_333, "dout_aclk_gscl_333", "mout_aclk_gscl_333",
+ DIV_TOP_GSCL_ISP0, 0, 3),
+ DIV(TOP_DOUT_ACLK_GSCL_400, "dout_aclk_gscl_400", "mout_aclk_gscl_400",
+ DIV_TOP_GSCL_ISP0, 4, 3),
+ DIV(TOP_DOUT_ACLK_GSCL_FIMC, "dout_aclk_gscl_fimc",
+ "mout_aclk_gscl_fimc", DIV_TOP_GSCL_ISP0, 8, 3),
+ DIV(TOP_DOUT_SCLK_ISP1_SENSOR0_A, "dout_sclk_isp1_sensor0_a",
+ "mout_aclk_gscl_fimc", DIV_TOP_GSCL_ISP0, 16, 4),
+ DIV(TOP_DOUT_SCLK_ISP1_SENSOR1_A, "dout_sclk_isp1_sensor1_a",
+ "mout_aclk_gscl_400", DIV_TOP_GSCL_ISP0, 20, 4),
+ DIV(TOP_DOUT_SCLK_ISP1_SENSOR2_A, "dout_sclk_isp1_sensor2_a",
+ "mout_aclk_gscl_fimc", DIV_TOP_GSCL_ISP0, 24, 4),
+
+ DIV(TOP_DOUT_ACLK_ISP1_266, "dout_aclk_isp1_266", "mout_aclk_isp1_266",
+ DIV_TOP_ISP10, 0, 3),
+ DIV(TOP_DOUT_ACLK_ISP1_400, "dout_aclk_isp1_400", "mout_aclk_isp1_400",
+ DIV_TOP_ISP10, 4, 3),
+ DIV(TOP_DOUT_SCLK_ISP1_SPI0_A, "dout_sclk_isp1_spi0_a",
+ "mout_sclk_isp1_spi0", DIV_TOP_ISP10, 12, 4),
+ DIV(TOP_DOUT_SCLK_ISP1_SPI0_B, "dout_sclk_isp1_spi0_b",
+ "dout_sclk_isp1_spi0_a", DIV_TOP_ISP10, 16, 8),
+
+ DIV(TOP_DOUT_SCLK_ISP1_SPI1_A, "dout_sclk_isp1_spi1_a",
+ "mout_sclk_isp1_spi1", DIV_TOP_ISP11, 0, 4),
+ DIV(TOP_DOUT_SCLK_ISP1_SPI1_B, "dout_sclk_isp1_spi1_b",
+ "dout_sclk_isp1_spi1_a", DIV_TOP_ISP11, 4, 8),
+ DIV(TOP_DOUT_SCLK_ISP1_UART, "dout_sclk_isp1_uart",
+ "mout_sclk_isp1_uart", DIV_TOP_ISP11, 12, 4),
+ DIV(TOP_DOUT_SCLK_ISP1_SENSOR0_B, "dout_sclk_isp1_sensor0_b",
+ "dout_sclk_isp1_sensor0_a", DIV_TOP_ISP11, 16, 4),
+ DIV(TOP_DOUT_SCLK_ISP1_SENSOR1_B, "dout_sclk_isp1_sensor1_b",
+ "dout_sclk_isp1_sensor1_a", DIV_TOP_ISP11, 20, 4),
+ DIV(TOP_DOUT_SCLK_ISP1_SENSOR2_B, "dout_sclk_isp1_sensor2_b",
+ "dout_sclk_isp1_sensor2_a", DIV_TOP_ISP11, 24, 4),
+
+ DIV(TOP_DOUTTOP__SCLK_HPM_TARGETCLK, "dout_sclk_hpm_targetclk",
+ "mout_bustop_pll_user", DIV_TOP_HPM, 0, 3),
+
+ DIV(TOP_DOUT_ACLK_DISP_333, "dout_aclk_disp_333", "mout_aclk_disp_333",
+ DIV_TOP_DISP, 0, 3),
+ DIV(TOP_DOUT_ACLK_DISP_222, "dout_aclk_disp_222", "mout_aclk_disp_222",
+ DIV_TOP_DISP, 4, 3),
+ DIV(TOP_DOUT_SCLK_DISP_PIXEL, "dout_sclk_disp_pixel",
+ "mout_sclk_disp_pixel", DIV_TOP_DISP, 8, 3),
+
+ DIV(TOP_DOUT_ACLK_BUS1_400, "dout_aclk_bus1_400",
+ "mout_bus1_bustop_400", DIV_TOP_BUS, 0, 3),
+ DIV(TOP_DOUT_ACLK_BUS1_100, "dout_aclk_bus1_100",
+ "mout_bus1_bustop_100", DIV_TOP_BUS, 4, 4),
+ DIV(TOP_DOUT_ACLK_BUS2_400, "dout_aclk_bus2_400",
+ "mout_bus2_bustop_400", DIV_TOP_BUS, 8, 3),
+ DIV(TOP_DOUT_ACLK_BUS2_100, "dout_aclk_bus2_100",
+ "mout_bus2_bustop_100", DIV_TOP_BUS, 12, 4),
+ DIV(TOP_DOUT_ACLK_BUS3_400, "dout_aclk_bus3_400",
+ "mout_bus3_bustop_400", DIV_TOP_BUS, 16, 3),
+ DIV(TOP_DOUT_ACLK_BUS3_100, "dout_aclk_bus3_100",
+ "mout_bus3_bustop_100", DIV_TOP_BUS, 20, 4),
+ DIV(TOP_DOUT_ACLK_BUS4_400, "dout_aclk_bus4_400",
+ "mout_bus4_bustop_400", DIV_TOP_BUS, 24, 3),
+ DIV(TOP_DOUT_ACLK_BUS4_100, "dout_aclk_bus4_100",
+ "mout_bus4_bustop_100", DIV_TOP_BUS, 28, 4),
+
+ DIV(TOP_DOUT_SCLK_PERI_SPI0_A, "dout_sclk_peri_spi0_a",
+ "mout_sclk_peri_spi0_clk", DIV_TOP_PERI0, 4, 4),
+ DIV(TOP_DOUT_SCLK_PERI_SPI0_B, "dout_sclk_peri_spi0_b",
+ "dout_sclk_peri_spi0_a", DIV_TOP_PERI0, 8, 8),
+ DIV(TOP_DOUT_SCLK_PERI_SPI1_A, "dout_sclk_peri_spi1_a",
+ "mout_sclk_peri_spi1_clk", DIV_TOP_PERI0, 16, 4),
+ DIV(TOP_DOUT_SCLK_PERI_SPI1_B, "dout_sclk_peri_spi1_b",
+ "dout_sclk_peri_spi1_a", DIV_TOP_PERI0, 20, 8),
+
+ DIV(TOP_DOUT_SCLK_PERI_SPI2_A, "dout_sclk_peri_spi2_a",
+ "mout_sclk_peri_spi2_clk", DIV_TOP_PERI1, 0, 4),
+ DIV(TOP_DOUT_SCLK_PERI_SPI2_B, "dout_sclk_peri_spi2_b",
+ "dout_sclk_peri_spi2_a", DIV_TOP_PERI1, 4, 8),
+ DIV(TOP_DOUT_SCLK_PERI_UART1, "dout_sclk_peri_uart1",
+ "mout_sclk_peri_uart1_uclk", DIV_TOP_PERI1, 16, 4),
+ DIV(TOP_DOUT_SCLK_PERI_UART2, "dout_sclk_peri_uart2",
+ "mout_sclk_peri_uart2_uclk", DIV_TOP_PERI1, 20, 4),
+ DIV(TOP_DOUT_SCLK_PERI_UART0, "dout_sclk_peri_uart0",
+ "mout_sclk_peri_uart0_uclk", DIV_TOP_PERI1, 24, 4),
+
+ DIV(TOP_DOUT_ACLK_PERI_66, "dout_aclk_peri_66", "mout_bustop_pll_user",
+ DIV_TOP_PERI2, 20, 4),
+ DIV(TOP_DOUT_ACLK_PERI_AUD, "dout_aclk_peri_aud",
+ "mout_audtop_pll_user", DIV_TOP_PERI2, 24, 3),
+
+ DIV(TOP_DOUT_ACLK_FSYS_200, "dout_aclk_fsys_200",
+ "mout_bustop_pll_user", DIV_TOP_FSYS0, 0, 3),
+ DIV(TOP_DOUT_SCLK_FSYS_USBDRD30_SUSPEND_CLK,
+ "dout_sclk_fsys_usbdrd30_suspend_clk",
+ "mout_sclk_fsys_usb", DIV_TOP_FSYS0, 4, 4),
+ DIV(TOP_DOUT_SCLK_FSYS_MMC0_SDCLKIN_A, "dout_sclk_fsys_mmc0_sdclkin_a",
+ "mout_sclk_fsys_mmc0_sdclkin_b",
+ DIV_TOP_FSYS0, 12, 4),
+ DIV(TOP_DOUT_SCLK_FSYS_MMC0_SDCLKIN_B, "dout_sclk_fsys_mmc0_sdclkin_b",
+ "dout_sclk_fsys_mmc0_sdclkin_a",
+ DIV_TOP_FSYS0, 16, 8),
+
+
+ DIV(TOP_DOUT_SCLK_FSYS_MMC1_SDCLKIN_A, "dout_sclk_fsys_mmc1_sdclkin_a",
+ "mout_sclk_fsys_mmc1_sdclkin_b",
+ DIV_TOP_FSYS1, 0, 4),
+ DIV(TOP_DOUT_SCLK_FSYS_MMC1_SDCLKIN_B, "dout_sclk_fsys_mmc1_sdclkin_b",
+ "dout_sclk_fsys_mmc1_sdclkin_a",
+ DIV_TOP_FSYS1, 4, 8),
+ DIV(TOP_DOUT_SCLK_FSYS_MMC2_SDCLKIN_A, "dout_sclk_fsys_mmc2_sdclkin_a",
+ "mout_sclk_fsys_mmc2_sdclkin_b",
+ DIV_TOP_FSYS1, 12, 4),
+ DIV(TOP_DOUT_SCLK_FSYS_MMC2_SDCLKIN_B, "dout_sclk_fsys_mmc2_sdclkin_b",
+ "dout_sclk_fsys_mmc2_sdclkin_a",
+ DIV_TOP_FSYS1, 16, 8),
+
+};
+
+struct samsung_gate_clock top_gate_clks[] __initdata = {
+ GATE(TOP_SCLK_MMC0, "sclk_fsys_mmc0_sdclkin",
+ "dout_sclk_fsys_mmc0_sdclkin_b",
+ EN_SCLK_TOP, 7, CLK_SET_RATE_PARENT, 0),
+ GATE(TOP_SCLK_MMC1, "sclk_fsys_mmc1_sdclkin",
+ "dout_sclk_fsys_mmc1_sdclkin_b",
+ EN_SCLK_TOP, 8, CLK_SET_RATE_PARENT, 0),
+ GATE(TOP_SCLK_MMC2, "sclk_fsys_mmc2_sdclkin",
+ "dout_sclk_fsys_mmc2_sdclkin_b",
+ EN_SCLK_TOP, 9, CLK_SET_RATE_PARENT, 0),
+ GATE(TOP_SCLK_FIMD1, "sclk_disp_pixel", "dout_sclk_disp_pixel",
+ EN_ACLK_TOP, 10, CLK_IGNORE_UNUSED |
+ CLK_SET_RATE_PARENT, 0),
+};
+
+static struct samsung_pll_clock top_pll_clks[] __initdata = {
+ PLL(pll_2550xx, TOP_FOUT_DISP_PLL, "fout_disp_pll", "fin_pll",
+ DISP_PLL_LOCK, DISP_PLL_CON0,
+ pll2550_24mhz_tbl),
+ PLL(pll_2650xx, TOP_FOUT_AUD_PLL, "fout_aud_pll", "fin_pll",
+ AUD_PLL_LOCK, AUD_PLL_CON0,
+ pll2650_24mhz_tbl),
+};
+
+static void __init exynos5260_clk_top_init(struct device_node *np)
+{
+ struct exynos5260_cmu_info cmu = {0};
+
+ cmu.pll_clks = top_pll_clks;
+ cmu.nr_pll_clks = ARRAY_SIZE(top_pll_clks);
+ cmu.mux_clks = top_mux_clks;
+ cmu.nr_mux_clks = ARRAY_SIZE(top_mux_clks);
+ cmu.div_clks = top_div_clks;
+ cmu.nr_div_clks = ARRAY_SIZE(top_div_clks);
+ cmu.gate_clks = top_gate_clks;
+ cmu.nr_gate_clks = ARRAY_SIZE(top_gate_clks);
+ cmu.fixed_clks = fixed_rate_clks;
+ cmu.nr_fixed_clks = ARRAY_SIZE(fixed_rate_clks);
+ cmu.nr_clk_ids = TOP_NR_CLK;
+ cmu.clk_regs = top_clk_regs;
+ cmu.nr_clk_regs = ARRAY_SIZE(top_clk_regs);
+
+ exynos5260_cmu_register_one(np, &cmu);
+}
+
+CLK_OF_DECLARE(exynos5260_clk_top, "samsung,exynos5260-clock-top",
+ exynos5260_clk_top_init);
diff --git a/drivers/clk/samsung/clk-exynos5260.h b/drivers/clk/samsung/clk-exynos5260.h
new file mode 100644
index 000000000000..d739716d6ea1
--- /dev/null
+++ b/drivers/clk/samsung/clk-exynos5260.h
@@ -0,0 +1,459 @@
+/*
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ * Author: Rahul Sharma <rahul.sharma@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Common Clock Framework support for Exynos5260 SoC.
+ */
+
+#ifndef __CLK_EXYNOS5260_H
+#define __CLK_EXYNOS5260_H
+
+/*
+*Registers for CMU_AUD
+*/
+#define MUX_SEL_AUD 0x0200
+#define MUX_ENABLE_AUD 0x0300
+#define MUX_STAT_AUD 0x0400
+#define MUX_IGNORE_AUD 0x0500
+#define DIV_AUD0 0x0600
+#define DIV_AUD1 0x0604
+#define DIV_STAT_AUD0 0x0700
+#define DIV_STAT_AUD1 0x0704
+#define EN_ACLK_AUD 0x0800
+#define EN_PCLK_AUD 0x0900
+#define EN_SCLK_AUD 0x0a00
+#define EN_IP_AUD 0x0b00
+
+/*
+*Registers for CMU_DISP
+*/
+#define MUX_SEL_DISP0 0x0200
+#define MUX_SEL_DISP1 0x0204
+#define MUX_SEL_DISP2 0x0208
+#define MUX_SEL_DISP3 0x020C
+#define MUX_SEL_DISP4 0x0210
+#define MUX_ENABLE_DISP0 0x0300
+#define MUX_ENABLE_DISP1 0x0304
+#define MUX_ENABLE_DISP2 0x0308
+#define MUX_ENABLE_DISP3 0x030c
+#define MUX_ENABLE_DISP4 0x0310
+#define MUX_STAT_DISP0 0x0400
+#define MUX_STAT_DISP1 0x0404
+#define MUX_STAT_DISP2 0x0408
+#define MUX_STAT_DISP3 0x040c
+#define MUX_STAT_DISP4 0x0410
+#define MUX_IGNORE_DISP0 0x0500
+#define MUX_IGNORE_DISP1 0x0504
+#define MUX_IGNORE_DISP2 0x0508
+#define MUX_IGNORE_DISP3 0x050c
+#define MUX_IGNORE_DISP4 0x0510
+#define DIV_DISP 0x0600
+#define DIV_STAT_DISP 0x0700
+#define EN_ACLK_DISP 0x0800
+#define EN_PCLK_DISP 0x0900
+#define EN_SCLK_DISP0 0x0a00
+#define EN_SCLK_DISP1 0x0a04
+#define EN_IP_DISP 0x0b00
+#define EN_IP_DISP_BUS 0x0b04
+
+
+/*
+*Registers for CMU_EGL
+*/
+#define EGL_PLL_LOCK 0x0000
+#define EGL_DPLL_LOCK 0x0004
+#define EGL_PLL_CON0 0x0100
+#define EGL_PLL_CON1 0x0104
+#define EGL_PLL_FREQ_DET 0x010c
+#define EGL_DPLL_CON0 0x0110
+#define EGL_DPLL_CON1 0x0114
+#define EGL_DPLL_FREQ_DET 0x011c
+#define MUX_SEL_EGL 0x0200
+#define MUX_ENABLE_EGL 0x0300
+#define MUX_STAT_EGL 0x0400
+#define DIV_EGL 0x0600
+#define DIV_EGL_PLL_FDET 0x0604
+#define DIV_STAT_EGL 0x0700
+#define DIV_STAT_EGL_PLL_FDET 0x0704
+#define EN_ACLK_EGL 0x0800
+#define EN_PCLK_EGL 0x0900
+#define EN_SCLK_EGL 0x0a00
+#define EN_IP_EGL 0x0b00
+#define CLKOUT_CMU_EGL 0x0c00
+#define CLKOUT_CMU_EGL_DIV_STAT 0x0c04
+#define ARMCLK_STOPCTRL 0x1000
+#define EAGLE_EMA_CTRL 0x1008
+#define EAGLE_EMA_STATUS 0x100c
+#define PWR_CTRL 0x1020
+#define PWR_CTRL2 0x1024
+#define CLKSTOP_CTRL 0x1028
+#define INTR_SPREAD_EN 0x1080
+#define INTR_SPREAD_USE_STANDBYWFI 0x1084
+#define INTR_SPREAD_BLOCKING_DURATION 0x1088
+#define CMU_EGL_SPARE0 0x2000
+#define CMU_EGL_SPARE1 0x2004
+#define CMU_EGL_SPARE2 0x2008
+#define CMU_EGL_SPARE3 0x200c
+#define CMU_EGL_SPARE4 0x2010
+
+/*
+*Registers for CMU_FSYS
+*/
+
+#define MUX_SEL_FSYS0 0x0200
+#define MUX_SEL_FSYS1 0x0204
+#define MUX_ENABLE_FSYS0 0x0300
+#define MUX_ENABLE_FSYS1 0x0304
+#define MUX_STAT_FSYS0 0x0400
+#define MUX_STAT_FSYS1 0x0404
+#define MUX_IGNORE_FSYS0 0x0500
+#define MUX_IGNORE_FSYS1 0x0504
+#define EN_ACLK_FSYS 0x0800
+#define EN_ACLK_FSYS_SECURE_RTIC 0x0804
+#define EN_ACLK_FSYS_SECURE_SMMU_RTIC 0x0808
+#define EN_PCLK_FSYS 0x0900
+#define EN_SCLK_FSYS 0x0a00
+#define EN_IP_FSYS 0x0b00
+#define EN_IP_FSYS_SECURE_RTIC 0x0b04
+#define EN_IP_FSYS_SECURE_SMMU_RTIC 0x0b08
+
+/*
+*Registers for CMU_G2D
+*/
+
+#define MUX_SEL_G2D 0x0200
+#define MUX_ENABLE_G2D 0x0300
+#define MUX_STAT_G2D 0x0400
+#define DIV_G2D 0x0600
+#define DIV_STAT_G2D 0x0700
+#define EN_ACLK_G2D 0x0800
+#define EN_ACLK_G2D_SECURE_SSS 0x0804
+#define EN_ACLK_G2D_SECURE_SLIM_SSS 0x0808
+#define EN_ACLK_G2D_SECURE_SMMU_SLIM_SSS 0x080c
+#define EN_ACLK_G2D_SECURE_SMMU_SSS 0x0810
+#define EN_ACLK_G2D_SECURE_SMMU_MDMA 0x0814
+#define EN_ACLK_G2D_SECURE_SMMU_G2D 0x0818
+#define EN_PCLK_G2D 0x0900
+#define EN_PCLK_G2D_SECURE_SMMU_SLIM_SSS 0x0904
+#define EN_PCLK_G2D_SECURE_SMMU_SSS 0x0908
+#define EN_PCLK_G2D_SECURE_SMMU_MDMA 0x090c
+#define EN_PCLK_G2D_SECURE_SMMU_G2D 0x0910
+#define EN_IP_G2D 0x0b00
+#define EN_IP_G2D_SECURE_SSS 0x0b04
+#define EN_IP_G2D_SECURE_SLIM_SSS 0x0b08
+#define EN_IP_G2D_SECURE_SMMU_SLIM_SSS 0x0b0c
+#define EN_IP_G2D_SECURE_SMMU_SSS 0x0b10
+#define EN_IP_G2D_SECURE_SMMU_MDMA 0x0b14
+#define EN_IP_G2D_SECURE_SMMU_G2D 0x0b18
+
+/*
+*Registers for CMU_G3D
+*/
+
+#define G3D_PLL_LOCK 0x0000
+#define G3D_PLL_CON0 0x0100
+#define G3D_PLL_CON1 0x0104
+#define G3D_PLL_FDET 0x010c
+#define MUX_SEL_G3D 0x0200
+#define MUX_EN_G3D 0x0300
+#define MUX_STAT_G3D 0x0400
+#define MUX_IGNORE_G3D 0x0500
+#define DIV_G3D 0x0600
+#define DIV_G3D_PLL_FDET 0x0604
+#define DIV_STAT_G3D 0x0700
+#define DIV_STAT_G3D_PLL_FDET 0x0704
+#define EN_ACLK_G3D 0x0800
+#define EN_PCLK_G3D 0x0900
+#define EN_SCLK_G3D 0x0a00
+#define EN_IP_G3D 0x0b00
+#define CLKOUT_CMU_G3D 0x0c00
+#define CLKOUT_CMU_G3D_DIV_STAT 0x0c04
+#define G3DCLK_STOPCTRL 0x1000
+#define G3D_EMA_CTRL 0x1008
+#define G3D_EMA_STATUS 0x100c
+
+/*
+*Registers for CMU_GSCL
+*/
+
+#define MUX_SEL_GSCL 0x0200
+#define MUX_EN_GSCL 0x0300
+#define MUX_STAT_GSCL 0x0400
+#define MUX_IGNORE_GSCL 0x0500
+#define DIV_GSCL 0x0600
+#define DIV_STAT_GSCL 0x0700
+#define EN_ACLK_GSCL 0x0800
+#define EN_ACLK_GSCL_FIMC 0x0804
+#define EN_ACLK_GSCL_SECURE_SMMU_GSCL0 0x0808
+#define EN_ACLK_GSCL_SECURE_SMMU_GSCL1 0x080c
+#define EN_ACLK_GSCL_SECURE_SMMU_MSCL0 0x0810
+#define EN_ACLK_GSCL_SECURE_SMMU_MSCL1 0x0814
+#define EN_PCLK_GSCL 0x0900
+#define EN_PCLK_GSCL_FIMC 0x0904
+#define EN_PCLK_GSCL_SECURE_SMMU_GSCL0 0x0908
+#define EN_PCLK_GSCL_SECURE_SMMU_GSCL1 0x090c
+#define EN_PCLK_GSCL_SECURE_SMMU_MSCL0 0x0910
+#define EN_PCLK_GSCL_SECURE_SMMU_MSCL1 0x0914
+#define EN_SCLK_GSCL 0x0a00
+#define EN_SCLK_GSCL_FIMC 0x0a04
+#define EN_IP_GSCL 0x0b00
+#define EN_IP_GSCL_FIMC 0x0b04
+#define EN_IP_GSCL_SECURE_SMMU_GSCL0 0x0b08
+#define EN_IP_GSCL_SECURE_SMMU_GSCL1 0x0b0c
+#define EN_IP_GSCL_SECURE_SMMU_MSCL0 0x0b10
+#define EN_IP_GSCL_SECURE_SMMU_MSCL1 0x0b14
+
+/*
+*Registers for CMU_ISP
+*/
+#define MUX_SEL_ISP0 0x0200
+#define MUX_SEL_ISP1 0x0204
+#define MUX_ENABLE_ISP0 0x0300
+#define MUX_ENABLE_ISP1 0x0304
+#define MUX_STAT_ISP0 0x0400
+#define MUX_STAT_ISP1 0x0404
+#define MUX_IGNORE_ISP0 0x0500
+#define MUX_IGNORE_ISP1 0x0504
+#define DIV_ISP 0x0600
+#define DIV_STAT_ISP 0x0700
+#define EN_ACLK_ISP0 0x0800
+#define EN_ACLK_ISP1 0x0804
+#define EN_PCLK_ISP0 0x0900
+#define EN_PCLK_ISP1 0x0904
+#define EN_SCLK_ISP 0x0a00
+#define EN_IP_ISP0 0x0b00
+#define EN_IP_ISP1 0x0b04
+
+/*
+*Registers for CMU_KFC
+*/
+#define KFC_PLL_LOCK 0x0000
+#define KFC_PLL_CON0 0x0100
+#define KFC_PLL_CON1 0x0104
+#define KFC_PLL_FDET 0x010c
+#define MUX_SEL_KFC0 0x0200
+#define MUX_SEL_KFC2 0x0208
+#define MUX_ENABLE_KFC0 0x0300
+#define MUX_ENABLE_KFC2 0x0308
+#define MUX_STAT_KFC0 0x0400
+#define MUX_STAT_KFC2 0x0408
+#define DIV_KFC 0x0600
+#define DIV_KFC_PLL_FDET 0x0604
+#define DIV_STAT_KFC 0x0700
+#define DIV_STAT_KFC_PLL_FDET 0x0704
+#define EN_ACLK_KFC 0x0800
+#define EN_PCLK_KFC 0x0900
+#define EN_SCLK_KFC 0x0a00
+#define EN_IP_KFC 0x0b00
+#define CLKOUT_CMU_KFC 0x0c00
+#define CLKOUT_CMU_KFC_DIV_STAT 0x0c04
+#define ARMCLK_STOPCTRL_KFC 0x1000
+#define ARM_EMA_CTRL 0x1008
+#define ARM_EMA_STATUS 0x100c
+#define PWR_CTRL_KFC 0x1020
+#define PWR_CTRL2_KFC 0x1024
+#define CLKSTOP_CTRL_KFC 0x1028
+#define INTR_SPREAD_ENABLE_KFC 0x1080
+#define INTR_SPREAD_USE_STANDBYWFI_KFC 0x1084
+#define INTR_SPREAD_BLOCKING_DURATION_KFC 0x1088
+#define CMU_KFC_SPARE0 0x2000
+#define CMU_KFC_SPARE1 0x2004
+#define CMU_KFC_SPARE2 0x2008
+#define CMU_KFC_SPARE3 0x200c
+#define CMU_KFC_SPARE4 0x2010
+
+/*
+*Registers for CMU_MFC
+*/
+#define MUX_SEL_MFC 0x0200
+#define MUX_ENABLE_MFC 0x0300
+#define MUX_STAT_MFC 0x0400
+#define DIV_MFC 0x0600
+#define DIV_STAT_MFC 0x0700
+#define EN_ACLK_MFC 0x0800
+#define EN_ACLK_SECURE_SMMU2_MFC 0x0804
+#define EN_PCLK_MFC 0x0900
+#define EN_PCLK_SECURE_SMMU2_MFC 0x0904
+#define EN_IP_MFC 0x0b00
+#define EN_IP_MFC_SECURE_SMMU2_MFC 0x0b04
+
+/*
+*Registers for CMU_MIF
+*/
+#define MEM_PLL_LOCK 0x0000
+#define BUS_PLL_LOCK 0x0004
+#define MEDIA_PLL_LOCK 0x0008
+#define MEM_PLL_CON0 0x0100
+#define MEM_PLL_CON1 0x0104
+#define MEM_PLL_FDET 0x010c
+#define BUS_PLL_CON0 0x0110
+#define BUS_PLL_CON1 0x0114
+#define BUS_PLL_FDET 0x011c
+#define MEDIA_PLL_CON0 0x0120
+#define MEDIA_PLL_CON1 0x0124
+#define MEDIA_PLL_FDET 0x012c
+#define MUX_SEL_MIF 0x0200
+#define MUX_ENABLE_MIF 0x0300
+#define MUX_STAT_MIF 0x0400
+#define MUX_IGNORE_MIF 0x0500
+#define DIV_MIF 0x0600
+#define DIV_MIF_PLL_FDET 0x0604
+#define DIV_STAT_MIF 0x0700
+#define DIV_STAT_MIF_PLL_FDET 0x0704
+#define EN_ACLK_MIF 0x0800
+#define EN_ACLK_MIF_SECURE_DREX1_TZ 0x0804
+#define EN_ACLK_MIF_SECURE_DREX0_TZ 0x0808
+#define EN_ACLK_MIF_SECURE_INTMEM 0x080c
+#define EN_PCLK_MIF 0x0900
+#define EN_PCLK_MIF_SECURE_MONOCNT 0x0904
+#define EN_PCLK_MIF_SECURE_RTC_APBIF 0x0908
+#define EN_PCLK_MIF_SECURE_DREX1_TZ 0x090c
+#define EN_PCLK_MIF_SECURE_DREX0_TZ 0x0910
+#define EN_SCLK_MIF 0x0a00
+#define EN_IP_MIF 0x0b00
+#define EN_IP_MIF_SECURE_MONOCNT 0x0b04
+#define EN_IP_MIF_SECURE_RTC_APBIF 0x0b08
+#define EN_IP_MIF_SECURE_DREX1_TZ 0x0b0c
+#define EN_IP_MIF_SECURE_DREX0_TZ 0x0b10
+#define EN_IP_MIF_SECURE_INTEMEM 0x0b14
+#define CLKOUT_CMU_MIF_DIV_STAT 0x0c04
+#define DREX_FREQ_CTRL 0x1000
+#define PAUSE 0x1004
+#define DDRPHY_LOCK_CTRL 0x1008
+#define CLKOUT_CMU_MIF 0xcb00
+
+/*
+*Registers for CMU_PERI
+*/
+#define MUX_SEL_PERI 0x0200
+#define MUX_SEL_PERI1 0x0204
+#define MUX_ENABLE_PERI 0x0300
+#define MUX_ENABLE_PERI1 0x0304
+#define MUX_STAT_PERI 0x0400
+#define MUX_STAT_PERI1 0x0404
+#define MUX_IGNORE_PERI 0x0500
+#define MUX_IGNORE_PERI1 0x0504
+#define DIV_PERI 0x0600
+#define DIV_STAT_PERI 0x0700
+#define EN_PCLK_PERI0 0x0800
+#define EN_PCLK_PERI1 0x0804
+#define EN_PCLK_PERI2 0x0808
+#define EN_PCLK_PERI3 0x080c
+#define EN_PCLK_PERI_SECURE_CHIPID 0x0810
+#define EN_PCLK_PERI_SECURE_PROVKEY0 0x0814
+#define EN_PCLK_PERI_SECURE_PROVKEY1 0x0818
+#define EN_PCLK_PERI_SECURE_SECKEY 0x081c
+#define EN_PCLK_PERI_SECURE_ANTIRBKCNT 0x0820
+#define EN_PCLK_PERI_SECURE_TOP_RTC 0x0824
+#define EN_PCLK_PERI_SECURE_TZPC 0x0828
+#define EN_SCLK_PERI 0x0a00
+#define EN_SCLK_PERI_SECURE_TOP_RTC 0x0a04
+#define EN_IP_PERI0 0x0b00
+#define EN_IP_PERI1 0x0b04
+#define EN_IP_PERI2 0x0b08
+#define EN_IP_PERI_SECURE_CHIPID 0x0b0c
+#define EN_IP_PERI_SECURE_PROVKEY0 0x0b10
+#define EN_IP_PERI_SECURE_PROVKEY1 0x0b14
+#define EN_IP_PERI_SECURE_SECKEY 0x0b18
+#define EN_IP_PERI_SECURE_ANTIRBKCNT 0x0b1c
+#define EN_IP_PERI_SECURE_TOP_RTC 0x0b20
+#define EN_IP_PERI_SECURE_TZPC 0x0b24
+
+/*
+*Registers for CMU_TOP
+*/
+#define DISP_PLL_LOCK 0x0000
+#define AUD_PLL_LOCK 0x0004
+#define DISP_PLL_CON0 0x0100
+#define DISP_PLL_CON1 0x0104
+#define DISP_PLL_FDET 0x0108
+#define AUD_PLL_CON0 0x0110
+#define AUD_PLL_CON1 0x0114
+#define AUD_PLL_CON2 0x0118
+#define AUD_PLL_FDET 0x011c
+#define MUX_SEL_TOP_PLL0 0x0200
+#define MUX_SEL_TOP_MFC 0x0204
+#define MUX_SEL_TOP_G2D 0x0208
+#define MUX_SEL_TOP_GSCL 0x020c
+#define MUX_SEL_TOP_ISP10 0x0214
+#define MUX_SEL_TOP_ISP11 0x0218
+#define MUX_SEL_TOP_DISP0 0x021c
+#define MUX_SEL_TOP_DISP1 0x0220
+#define MUX_SEL_TOP_BUS 0x0224
+#define MUX_SEL_TOP_PERI0 0x0228
+#define MUX_SEL_TOP_PERI1 0x022c
+#define MUX_SEL_TOP_FSYS 0x0230
+#define MUX_ENABLE_TOP_PLL0 0x0300
+#define MUX_ENABLE_TOP_MFC 0x0304
+#define MUX_ENABLE_TOP_G2D 0x0308
+#define MUX_ENABLE_TOP_GSCL 0x030c
+#define MUX_ENABLE_TOP_ISP10 0x0314
+#define MUX_ENABLE_TOP_ISP11 0x0318
+#define MUX_ENABLE_TOP_DISP0 0x031c
+#define MUX_ENABLE_TOP_DISP1 0x0320
+#define MUX_ENABLE_TOP_BUS 0x0324
+#define MUX_ENABLE_TOP_PERI0 0x0328
+#define MUX_ENABLE_TOP_PERI1 0x032c
+#define MUX_ENABLE_TOP_FSYS 0x0330
+#define MUX_STAT_TOP_PLL0 0x0400
+#define MUX_STAT_TOP_MFC 0x0404
+#define MUX_STAT_TOP_G2D 0x0408
+#define MUX_STAT_TOP_GSCL 0x040c
+#define MUX_STAT_TOP_ISP10 0x0414
+#define MUX_STAT_TOP_ISP11 0x0418
+#define MUX_STAT_TOP_DISP0 0x041c
+#define MUX_STAT_TOP_DISP1 0x0420
+#define MUX_STAT_TOP_BUS 0x0424
+#define MUX_STAT_TOP_PERI0 0x0428
+#define MUX_STAT_TOP_PERI1 0x042c
+#define MUX_STAT_TOP_FSYS 0x0430
+#define MUX_IGNORE_TOP_PLL0 0x0500
+#define MUX_IGNORE_TOP_MFC 0x0504
+#define MUX_IGNORE_TOP_G2D 0x0508
+#define MUX_IGNORE_TOP_GSCL 0x050c
+#define MUX_IGNORE_TOP_ISP10 0x0514
+#define MUX_IGNORE_TOP_ISP11 0x0518
+#define MUX_IGNORE_TOP_DISP0 0x051c
+#define MUX_IGNORE_TOP_DISP1 0x0520
+#define MUX_IGNORE_TOP_BUS 0x0524
+#define MUX_IGNORE_TOP_PERI0 0x0528
+#define MUX_IGNORE_TOP_PERI1 0x052c
+#define MUX_IGNORE_TOP_FSYS 0x0530
+#define DIV_TOP_G2D_MFC 0x0600
+#define DIV_TOP_GSCL_ISP0 0x0604
+#define DIV_TOP_ISP10 0x0608
+#define DIV_TOP_ISP11 0x060c
+#define DIV_TOP_DISP 0x0610
+#define DIV_TOP_BUS 0x0614
+#define DIV_TOP_PERI0 0x0618
+#define DIV_TOP_PERI1 0x061c
+#define DIV_TOP_PERI2 0x0620
+#define DIV_TOP_FSYS0 0x0624
+#define DIV_TOP_FSYS1 0x0628
+#define DIV_TOP_HPM 0x062c
+#define DIV_TOP_PLL_FDET 0x0630
+#define DIV_STAT_TOP_G2D_MFC 0x0700
+#define DIV_STAT_TOP_GSCL_ISP0 0x0704
+#define DIV_STAT_TOP_ISP10 0x0708
+#define DIV_STAT_TOP_ISP11 0x070c
+#define DIV_STAT_TOP_DISP 0x0710
+#define DIV_STAT_TOP_BUS 0x0714
+#define DIV_STAT_TOP_PERI0 0x0718
+#define DIV_STAT_TOP_PERI1 0x071c
+#define DIV_STAT_TOP_PERI2 0x0720
+#define DIV_STAT_TOP_FSYS0 0x0724
+#define DIV_STAT_TOP_FSYS1 0x0728
+#define DIV_STAT_TOP_HPM 0x072c
+#define DIV_STAT_TOP_PLL_FDET 0x0730
+#define EN_ACLK_TOP 0x0800
+#define EN_SCLK_TOP 0x0a00
+#define EN_IP_TOP 0x0b00
+#define CLKOUT_CMU_TOP 0x0c00
+#define CLKOUT_CMU_TOP_DIV_STAT 0x0c04
+
+#endif /*__CLK_EXYNOS5260_H */
+
diff --git a/drivers/clk/samsung/clk-exynos5410.c b/drivers/clk/samsung/clk-exynos5410.c
new file mode 100644
index 000000000000..c9505ab9ee70
--- /dev/null
+++ b/drivers/clk/samsung/clk-exynos5410.c
@@ -0,0 +1,209 @@
+/*
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ * Author: Tarek Dakhran <t.dakhran@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Common Clock Framework support for Exynos5410 SoC.
+*/
+
+#include <dt-bindings/clock/exynos5410.h>
+
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+#include "clk.h"
+
+#define APLL_LOCK 0x0
+#define APLL_CON0 0x100
+#define CPLL_LOCK 0x10020
+#define CPLL_CON0 0x10120
+#define MPLL_LOCK 0x4000
+#define MPLL_CON0 0x4100
+#define BPLL_LOCK 0x20010
+#define BPLL_CON0 0x20110
+#define KPLL_LOCK 0x28000
+#define KPLL_CON0 0x28100
+
+#define SRC_CPU 0x200
+#define DIV_CPU0 0x500
+#define SRC_CPERI1 0x4204
+#define DIV_TOP0 0x10510
+#define DIV_TOP1 0x10514
+#define DIV_FSYS1 0x1054c
+#define DIV_FSYS2 0x10550
+#define DIV_PERIC0 0x10558
+#define SRC_TOP0 0x10210
+#define SRC_TOP1 0x10214
+#define SRC_TOP2 0x10218
+#define SRC_FSYS 0x10244
+#define SRC_PERIC0 0x10250
+#define SRC_MASK_FSYS 0x10340
+#define SRC_MASK_PERIC0 0x10350
+#define GATE_BUS_FSYS0 0x10740
+#define GATE_IP_FSYS 0x10944
+#define GATE_IP_PERIC 0x10950
+#define GATE_IP_PERIS 0x10960
+#define SRC_CDREX 0x20200
+#define SRC_KFC 0x28200
+#define DIV_KFC0 0x28500
+
+/* list of PLLs */
+enum exynos5410_plls {
+ apll, cpll, mpll,
+ bpll, kpll,
+ nr_plls /* number of PLLs */
+};
+
+/* list of all parent clocks */
+PNAME(apll_p) = { "fin_pll", "fout_apll", };
+PNAME(bpll_p) = { "fin_pll", "fout_bpll", };
+PNAME(cpll_p) = { "fin_pll", "fout_cpll" };
+PNAME(mpll_p) = { "fin_pll", "fout_mpll", };
+PNAME(kpll_p) = { "fin_pll", "fout_kpll", };
+
+PNAME(mout_cpu_p) = { "mout_apll", "sclk_mpll", };
+PNAME(mout_kfc_p) = { "mout_kpll", "sclk_mpll", };
+
+PNAME(mpll_user_p) = { "fin_pll", "sclk_mpll", };
+PNAME(bpll_user_p) = { "fin_pll", "sclk_bpll", };
+PNAME(mpll_bpll_p) = { "sclk_mpll_muxed", "sclk_bpll_muxed", };
+
+PNAME(group2_p) = { "fin_pll", "fin_pll", "none", "none",
+ "none", "none", "sclk_mpll_bpll",
+ "none", "none", "sclk_cpll" };
+
+static struct samsung_mux_clock exynos5410_mux_clks[] __initdata = {
+ MUX(0, "mout_apll", apll_p, SRC_CPU, 0, 1),
+ MUX(0, "mout_cpu", mout_cpu_p, SRC_CPU, 16, 1),
+
+ MUX(0, "mout_kpll", kpll_p, SRC_KFC, 0, 1),
+ MUX(0, "mout_kfc", mout_kfc_p, SRC_KFC, 16, 1),
+
+ MUX(0, "sclk_mpll", mpll_p, SRC_CPERI1, 8, 1),
+ MUX(0, "sclk_mpll_muxed", mpll_user_p, SRC_TOP2, 20, 1),
+
+ MUX(0, "sclk_bpll", bpll_p, SRC_CDREX, 0, 1),
+ MUX(0, "sclk_bpll_muxed", bpll_user_p, SRC_TOP2, 24, 1),
+
+ MUX(0, "sclk_cpll", cpll_p, SRC_TOP2, 8, 1),
+
+ MUX(0, "sclk_mpll_bpll", mpll_bpll_p, SRC_TOP1, 20, 1),
+
+ MUX(0, "mout_mmc0", group2_p, SRC_FSYS, 0, 4),
+ MUX(0, "mout_mmc1", group2_p, SRC_FSYS, 4, 4),
+ MUX(0, "mout_mmc2", group2_p, SRC_FSYS, 8, 4),
+
+ MUX(0, "mout_uart0", group2_p, SRC_PERIC0, 0, 4),
+ MUX(0, "mout_uart1", group2_p, SRC_PERIC0, 4, 4),
+ MUX(0, "mout_uart2", group2_p, SRC_PERIC0, 8, 4),
+
+ MUX(0, "mout_aclk200", mpll_bpll_p, SRC_TOP0, 12, 1),
+ MUX(0, "mout_aclk400", mpll_bpll_p, SRC_TOP0, 20, 1),
+};
+
+static struct samsung_div_clock exynos5410_div_clks[] __initdata = {
+ DIV(0, "div_arm", "mout_cpu", DIV_CPU0, 0, 3),
+ DIV(0, "div_arm2", "div_arm", DIV_CPU0, 28, 3),
+
+ DIV(0, "div_acp", "div_arm2", DIV_CPU0, 8, 3),
+ DIV(0, "div_cpud", "div_arm2", DIV_CPU0, 4, 3),
+ DIV(0, "div_atb", "div_arm2", DIV_CPU0, 16, 3),
+ DIV(0, "pclk_dbg", "div_arm2", DIV_CPU0, 20, 3),
+
+ DIV(0, "div_kfc", "mout_kfc", DIV_KFC0, 0, 3),
+ DIV(0, "div_aclk", "div_kfc", DIV_KFC0, 4, 3),
+ DIV(0, "div_pclk", "div_kfc", DIV_KFC0, 20, 3),
+
+ DIV(0, "aclk66_pre", "sclk_mpll_muxed", DIV_TOP1, 24, 3),
+ DIV(0, "aclk66", "aclk66_pre", DIV_TOP0, 0, 3),
+
+ DIV(0, "div_mmc0", "mout_mmc0", DIV_FSYS1, 0, 4),
+ DIV(0, "div_mmc1", "mout_mmc1", DIV_FSYS1, 16, 4),
+ DIV(0, "div_mmc2", "mout_mmc2", DIV_FSYS2, 0, 4),
+
+ DIV_F(0, "div_mmc_pre0", "div_mmc0",
+ DIV_FSYS1, 8, 8, CLK_SET_RATE_PARENT, 0),
+ DIV_F(0, "div_mmc_pre1", "div_mmc1",
+ DIV_FSYS1, 24, 8, CLK_SET_RATE_PARENT, 0),
+ DIV_F(0, "div_mmc_pre2", "div_mmc2",
+ DIV_FSYS2, 8, 8, CLK_SET_RATE_PARENT, 0),
+
+ DIV(0, "div_uart0", "mout_uart0", DIV_PERIC0, 0, 4),
+ DIV(0, "div_uart1", "mout_uart1", DIV_PERIC0, 4, 4),
+ DIV(0, "div_uart2", "mout_uart2", DIV_PERIC0, 8, 4),
+ DIV(0, "div_uart3", "mout_uart3", DIV_PERIC0, 12, 4),
+
+ DIV(0, "aclk200", "mout_aclk200", DIV_TOP0, 12, 3),
+ DIV(0, "aclk400", "mout_aclk400", DIV_TOP0, 24, 3),
+};
+
+static struct samsung_gate_clock exynos5410_gate_clks[] __initdata = {
+ GATE(CLK_MCT, "mct", "aclk66", GATE_IP_PERIS, 18, 0, 0),
+
+ GATE(CLK_SCLK_MMC0, "sclk_mmc0", "div_mmc_pre0",
+ SRC_MASK_FSYS, 0, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_SCLK_MMC1, "sclk_mmc1", "div_mmc_pre1",
+ SRC_MASK_FSYS, 4, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_SCLK_MMC2, "sclk_mmc2", "div_mmc_pre2",
+ SRC_MASK_FSYS, 8, CLK_SET_RATE_PARENT, 0),
+
+ GATE(CLK_MMC0, "sdmmc0", "aclk200", GATE_BUS_FSYS0, 12, 0, 0),
+ GATE(CLK_MMC1, "sdmmc1", "aclk200", GATE_BUS_FSYS0, 13, 0, 0),
+ GATE(CLK_MMC2, "sdmmc2", "aclk200", GATE_BUS_FSYS0, 14, 0, 0),
+
+ GATE(CLK_UART0, "uart0", "aclk66", GATE_IP_PERIC, 0, 0, 0),
+ GATE(CLK_UART1, "uart1", "aclk66", GATE_IP_PERIC, 1, 0, 0),
+ GATE(CLK_UART2, "uart2", "aclk66", GATE_IP_PERIC, 2, 0, 0),
+
+ GATE(CLK_SCLK_UART0, "sclk_uart0", "div_uart0",
+ SRC_MASK_PERIC0, 0, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_SCLK_UART1, "sclk_uart1", "div_uart1",
+ SRC_MASK_PERIC0, 4, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_SCLK_UART2, "sclk_uart2", "div_uart2",
+ SRC_MASK_PERIC0, 8, CLK_SET_RATE_PARENT, 0),
+};
+
+static struct samsung_pll_clock exynos5410_plls[nr_plls] __initdata = {
+ [apll] = PLL(pll_35xx, CLK_FOUT_APLL, "fout_apll", "fin_pll", APLL_LOCK,
+ APLL_CON0, NULL),
+ [cpll] = PLL(pll_35xx, CLK_FOUT_CPLL, "fout_cpll", "fin_pll", CPLL_LOCK,
+ CPLL_CON0, NULL),
+ [mpll] = PLL(pll_35xx, CLK_FOUT_MPLL, "fout_mpll", "fin_pll", MPLL_LOCK,
+ MPLL_CON0, NULL),
+ [bpll] = PLL(pll_35xx, CLK_FOUT_BPLL, "fout_bpll", "fin_pll", BPLL_LOCK,
+ BPLL_CON0, NULL),
+ [kpll] = PLL(pll_35xx, CLK_FOUT_KPLL, "fout_kpll", "fin_pll", KPLL_LOCK,
+ KPLL_CON0, NULL),
+};
+
+/* register exynos5410 clocks */
+static void __init exynos5410_clk_init(struct device_node *np)
+{
+ struct samsung_clk_provider *ctx;
+ void __iomem *reg_base;
+
+ reg_base = of_iomap(np, 0);
+ if (!reg_base)
+ panic("%s: failed to map registers\n", __func__);
+
+ ctx = samsung_clk_init(np, reg_base, CLK_NR_CLKS);
+
+ samsung_clk_register_pll(ctx, exynos5410_plls,
+ ARRAY_SIZE(exynos5410_plls), reg_base);
+
+ samsung_clk_register_mux(ctx, exynos5410_mux_clks,
+ ARRAY_SIZE(exynos5410_mux_clks));
+ samsung_clk_register_div(ctx, exynos5410_div_clks,
+ ARRAY_SIZE(exynos5410_div_clks));
+ samsung_clk_register_gate(ctx, exynos5410_gate_clks,
+ ARRAY_SIZE(exynos5410_gate_clks));
+
+ pr_debug("Exynos5410: clock setup completed.\n");
+}
+CLK_OF_DECLARE(exynos5410_clk, "samsung,exynos5410-clock", exynos5410_clk_init);
diff --git a/drivers/clk/samsung/clk-exynos5420.c b/drivers/clk/samsung/clk-exynos5420.c
index 60b26819bed5..9d7d7eed03fd 100644
--- a/drivers/clk/samsung/clk-exynos5420.c
+++ b/drivers/clk/samsung/clk-exynos5420.c
@@ -27,18 +27,24 @@
#define DIV_CPU1 0x504
#define GATE_BUS_CPU 0x700
#define GATE_SCLK_CPU 0x800
+#define CLKOUT_CMU_CPU 0xa00
+#define GATE_IP_G2D 0x8800
#define CPLL_LOCK 0x10020
#define DPLL_LOCK 0x10030
#define EPLL_LOCK 0x10040
#define RPLL_LOCK 0x10050
#define IPLL_LOCK 0x10060
#define SPLL_LOCK 0x10070
-#define VPLL_LOCK 0x10070
+#define VPLL_LOCK 0x10080
#define MPLL_LOCK 0x10090
#define CPLL_CON0 0x10120
#define DPLL_CON0 0x10128
#define EPLL_CON0 0x10130
+#define EPLL_CON1 0x10134
+#define EPLL_CON2 0x10138
#define RPLL_CON0 0x10140
+#define RPLL_CON1 0x10144
+#define RPLL_CON2 0x10148
#define IPLL_CON0 0x10150
#define SPLL_CON0 0x10160
#define VPLL_CON0 0x10170
@@ -51,21 +57,31 @@
#define SRC_TOP5 0x10214
#define SRC_TOP6 0x10218
#define SRC_TOP7 0x1021c
+#define SRC_TOP8 0x10220 /* 5800 specific */
+#define SRC_TOP9 0x10224 /* 5800 specific */
#define SRC_DISP10 0x1022c
#define SRC_MAU 0x10240
#define SRC_FSYS 0x10244
#define SRC_PERIC0 0x10250
#define SRC_PERIC1 0x10254
+#define SRC_ISP 0x10270
+#define SRC_CAM 0x10274 /* 5800 specific */
#define SRC_TOP10 0x10280
#define SRC_TOP11 0x10284
#define SRC_TOP12 0x10288
-#define SRC_MASK_DISP10 0x1032c
+#define SRC_TOP13 0x1028c /* 5800 specific */
+#define SRC_MASK_TOP2 0x10308
+#define SRC_MASK_TOP7 0x1031c
+#define SRC_MASK_DISP10 0x1032c
+#define SRC_MASK_MAU 0x10334
#define SRC_MASK_FSYS 0x10340
#define SRC_MASK_PERIC0 0x10350
#define SRC_MASK_PERIC1 0x10354
#define DIV_TOP0 0x10500
#define DIV_TOP1 0x10504
#define DIV_TOP2 0x10508
+#define DIV_TOP8 0x10520 /* 5800 specific */
+#define DIV_TOP9 0x10524 /* 5800 specific */
#define DIV_DISP10 0x1052c
#define DIV_MAU 0x10544
#define DIV_FSYS0 0x10548
@@ -76,54 +92,82 @@
#define DIV_PERIC2 0x10560
#define DIV_PERIC3 0x10564
#define DIV_PERIC4 0x10568
+#define DIV_CAM 0x10574 /* 5800 specific */
+#define SCLK_DIV_ISP0 0x10580
+#define SCLK_DIV_ISP1 0x10584
+#define DIV2_RATIO0 0x10590
+#define DIV4_RATIO 0x105a0
#define GATE_BUS_TOP 0x10700
+#define GATE_BUS_GEN 0x1073c
#define GATE_BUS_FSYS0 0x10740
+#define GATE_BUS_FSYS2 0x10748
#define GATE_BUS_PERIC 0x10750
#define GATE_BUS_PERIC1 0x10754
#define GATE_BUS_PERIS0 0x10760
#define GATE_BUS_PERIS1 0x10764
+#define GATE_BUS_NOC 0x10770
+#define GATE_TOP_SCLK_ISP 0x10870
#define GATE_IP_GSCL0 0x10910
#define GATE_IP_GSCL1 0x10920
+#define GATE_IP_CAM 0x10924 /* 5800 specific */
#define GATE_IP_MFC 0x1092c
#define GATE_IP_DISP1 0x10928
#define GATE_IP_G3D 0x10930
#define GATE_IP_GEN 0x10934
+#define GATE_IP_FSYS 0x10944
+#define GATE_IP_PERIC 0x10950
+#define GATE_IP_PERIS 0x10960
#define GATE_IP_MSCL 0x10970
#define GATE_TOP_SCLK_GSCL 0x10820
#define GATE_TOP_SCLK_DISP1 0x10828
#define GATE_TOP_SCLK_MAU 0x1083c
#define GATE_TOP_SCLK_FSYS 0x10840
#define GATE_TOP_SCLK_PERIC 0x10850
+#define TOP_SPARE2 0x10b08
#define BPLL_LOCK 0x20010
#define BPLL_CON0 0x20110
-#define SRC_CDREX 0x20200
#define KPLL_LOCK 0x28000
#define KPLL_CON0 0x28100
#define SRC_KFC 0x28200
#define DIV_KFC0 0x28500
+/* Exynos5x SoC type */
+enum exynos5x_soc {
+ EXYNOS5420,
+ EXYNOS5800,
+};
+
/* list of PLLs */
-enum exynos5420_plls {
+enum exynos5x_plls {
apll, cpll, dpll, epll, rpll, ipll, spll, vpll, mpll,
bpll, kpll,
nr_plls /* number of PLLs */
};
static void __iomem *reg_base;
+static enum exynos5x_soc exynos5x_soc;
#ifdef CONFIG_PM_SLEEP
-static struct samsung_clk_reg_dump *exynos5420_save;
+static struct samsung_clk_reg_dump *exynos5x_save;
+static struct samsung_clk_reg_dump *exynos5800_save;
/*
* list of controller registers to be saved and restored during a
* suspend/resume cycle.
*/
-static unsigned long exynos5420_clk_regs[] __initdata = {
+static unsigned long exynos5x_clk_regs[] __initdata = {
SRC_CPU,
DIV_CPU0,
DIV_CPU1,
GATE_BUS_CPU,
GATE_SCLK_CPU,
+ CLKOUT_CMU_CPU,
+ EPLL_CON0,
+ EPLL_CON1,
+ EPLL_CON2,
+ RPLL_CON0,
+ RPLL_CON1,
+ RPLL_CON2,
SRC_TOP0,
SRC_TOP1,
SRC_TOP2,
@@ -140,10 +184,13 @@ static unsigned long exynos5420_clk_regs[] __initdata = {
SRC_TOP10,
SRC_TOP11,
SRC_TOP12,
+ SRC_MASK_TOP2,
+ SRC_MASK_TOP7,
SRC_MASK_DISP10,
SRC_MASK_FSYS,
SRC_MASK_PERIC0,
SRC_MASK_PERIC1,
+ SRC_ISP,
DIV_TOP0,
DIV_TOP1,
DIV_TOP2,
@@ -157,41 +204,71 @@ static unsigned long exynos5420_clk_regs[] __initdata = {
DIV_PERIC2,
DIV_PERIC3,
DIV_PERIC4,
+ SCLK_DIV_ISP0,
+ SCLK_DIV_ISP1,
+ DIV2_RATIO0,
+ DIV4_RATIO,
GATE_BUS_TOP,
+ GATE_BUS_GEN,
GATE_BUS_FSYS0,
+ GATE_BUS_FSYS2,
GATE_BUS_PERIC,
GATE_BUS_PERIC1,
GATE_BUS_PERIS0,
GATE_BUS_PERIS1,
+ GATE_BUS_NOC,
+ GATE_TOP_SCLK_ISP,
GATE_IP_GSCL0,
GATE_IP_GSCL1,
GATE_IP_MFC,
GATE_IP_DISP1,
GATE_IP_G3D,
GATE_IP_GEN,
+ GATE_IP_FSYS,
+ GATE_IP_PERIC,
+ GATE_IP_PERIS,
GATE_IP_MSCL,
GATE_TOP_SCLK_GSCL,
GATE_TOP_SCLK_DISP1,
GATE_TOP_SCLK_MAU,
GATE_TOP_SCLK_FSYS,
GATE_TOP_SCLK_PERIC,
- SRC_CDREX,
+ TOP_SPARE2,
SRC_KFC,
DIV_KFC0,
};
+static unsigned long exynos5800_clk_regs[] __initdata = {
+ SRC_TOP8,
+ SRC_TOP9,
+ SRC_CAM,
+ SRC_TOP1,
+ DIV_TOP8,
+ DIV_TOP9,
+ DIV_CAM,
+ GATE_IP_CAM,
+};
+
static int exynos5420_clk_suspend(void)
{
- samsung_clk_save(reg_base, exynos5420_save,
- ARRAY_SIZE(exynos5420_clk_regs));
+ samsung_clk_save(reg_base, exynos5x_save,
+ ARRAY_SIZE(exynos5x_clk_regs));
+
+ if (exynos5x_soc == EXYNOS5800)
+ samsung_clk_save(reg_base, exynos5800_save,
+ ARRAY_SIZE(exynos5800_clk_regs));
return 0;
}
static void exynos5420_clk_resume(void)
{
- samsung_clk_restore(reg_base, exynos5420_save,
- ARRAY_SIZE(exynos5420_clk_regs));
+ samsung_clk_restore(reg_base, exynos5x_save,
+ ARRAY_SIZE(exynos5x_clk_regs));
+
+ if (exynos5x_soc == EXYNOS5800)
+ samsung_clk_restore(reg_base, exynos5800_save,
+ ARRAY_SIZE(exynos5800_clk_regs));
}
static struct syscore_ops exynos5420_clk_syscore_ops = {
@@ -201,108 +278,183 @@ static struct syscore_ops exynos5420_clk_syscore_ops = {
static void exynos5420_clk_sleep_init(void)
{
- exynos5420_save = samsung_clk_alloc_reg_dump(exynos5420_clk_regs,
- ARRAY_SIZE(exynos5420_clk_regs));
- if (!exynos5420_save) {
+ exynos5x_save = samsung_clk_alloc_reg_dump(exynos5x_clk_regs,
+ ARRAY_SIZE(exynos5x_clk_regs));
+ if (!exynos5x_save) {
pr_warn("%s: failed to allocate sleep save data, no sleep support!\n",
__func__);
return;
}
+ if (exynos5x_soc == EXYNOS5800) {
+ exynos5800_save =
+ samsung_clk_alloc_reg_dump(exynos5800_clk_regs,
+ ARRAY_SIZE(exynos5800_clk_regs));
+ if (!exynos5800_save)
+ goto err_soc;
+ }
+
register_syscore_ops(&exynos5420_clk_syscore_ops);
+ return;
+err_soc:
+ kfree(exynos5x_save);
+ pr_warn("%s: failed to allocate sleep save data, no sleep support!\n",
+ __func__);
+ return;
}
#else
static void exynos5420_clk_sleep_init(void) {}
#endif
/* list of all parent clocks */
-PNAME(mspll_cpu_p) = { "sclk_cpll", "sclk_dpll",
- "sclk_mpll", "sclk_spll" };
-PNAME(cpu_p) = { "mout_apll" , "mout_mspll_cpu" };
-PNAME(kfc_p) = { "mout_kpll" , "mout_mspll_kfc" };
-PNAME(apll_p) = { "fin_pll", "fout_apll", };
-PNAME(bpll_p) = { "fin_pll", "fout_bpll", };
-PNAME(cpll_p) = { "fin_pll", "fout_cpll", };
-PNAME(dpll_p) = { "fin_pll", "fout_dpll", };
-PNAME(epll_p) = { "fin_pll", "fout_epll", };
-PNAME(ipll_p) = { "fin_pll", "fout_ipll", };
-PNAME(kpll_p) = { "fin_pll", "fout_kpll", };
-PNAME(mpll_p) = { "fin_pll", "fout_mpll", };
-PNAME(rpll_p) = { "fin_pll", "fout_rpll", };
-PNAME(spll_p) = { "fin_pll", "fout_spll", };
-PNAME(vpll_p) = { "fin_pll", "fout_vpll", };
-
-PNAME(group1_p) = { "sclk_cpll", "sclk_dpll", "sclk_mpll" };
-PNAME(group2_p) = { "fin_pll", "sclk_cpll", "sclk_dpll", "sclk_mpll",
- "sclk_spll", "sclk_ipll", "sclk_epll", "sclk_rpll" };
-PNAME(group3_p) = { "sclk_rpll", "sclk_spll" };
-PNAME(group4_p) = { "sclk_ipll", "sclk_dpll", "sclk_mpll" };
-PNAME(group5_p) = { "sclk_vpll", "sclk_dpll" };
-
-PNAME(sw_aclk66_p) = { "dout_aclk66", "sclk_spll" };
-PNAME(aclk66_peric_p) = { "fin_pll", "mout_sw_aclk66" };
-
-PNAME(sw_aclk200_fsys_p) = { "dout_aclk200_fsys", "sclk_spll"};
-PNAME(user_aclk200_fsys_p) = { "fin_pll", "mout_sw_aclk200_fsys" };
-
-PNAME(sw_aclk200_fsys2_p) = { "dout_aclk200_fsys2", "sclk_spll"};
-PNAME(user_aclk200_fsys2_p) = { "fin_pll", "mout_sw_aclk200_fsys2" };
-
-PNAME(sw_aclk200_p) = { "dout_aclk200", "sclk_spll"};
-PNAME(aclk200_disp1_p) = { "fin_pll", "mout_sw_aclk200" };
-
-PNAME(sw_aclk400_mscl_p) = { "dout_aclk400_mscl", "sclk_spll"};
-PNAME(user_aclk400_mscl_p) = { "fin_pll", "mout_sw_aclk400_mscl" };
-
-PNAME(sw_aclk333_p) = { "dout_aclk333", "sclk_spll"};
-PNAME(user_aclk333_p) = { "fin_pll", "mout_sw_aclk333" };
-
-PNAME(sw_aclk166_p) = { "dout_aclk166", "sclk_spll"};
-PNAME(user_aclk166_p) = { "fin_pll", "mout_sw_aclk166" };
-
-PNAME(sw_aclk266_p) = { "dout_aclk266", "sclk_spll"};
-PNAME(user_aclk266_p) = { "fin_pll", "mout_sw_aclk266" };
-
-PNAME(sw_aclk333_432_gscl_p) = { "dout_aclk333_432_gscl", "sclk_spll"};
-PNAME(user_aclk333_432_gscl_p) = { "fin_pll", "mout_sw_aclk333_432_gscl" };
-
-PNAME(sw_aclk300_gscl_p) = { "dout_aclk300_gscl", "sclk_spll"};
-PNAME(user_aclk300_gscl_p) = { "fin_pll", "mout_sw_aclk300_gscl" };
-
-PNAME(sw_aclk300_disp1_p) = { "dout_aclk300_disp1", "sclk_spll"};
-PNAME(user_aclk300_disp1_p) = { "fin_pll", "mout_sw_aclk300_disp1" };
-
-PNAME(sw_aclk300_jpeg_p) = { "dout_aclk300_jpeg", "sclk_spll"};
-PNAME(user_aclk300_jpeg_p) = { "fin_pll", "mout_sw_aclk300_jpeg" };
-
-PNAME(sw_aclk_g3d_p) = { "dout_aclk_g3d", "sclk_spll"};
-PNAME(user_aclk_g3d_p) = { "fin_pll", "mout_sw_aclk_g3d" };
-
-PNAME(sw_aclk266_g2d_p) = { "dout_aclk266_g2d", "sclk_spll"};
-PNAME(user_aclk266_g2d_p) = { "fin_pll", "mout_sw_aclk266_g2d" };
-
-PNAME(sw_aclk333_g2d_p) = { "dout_aclk333_g2d", "sclk_spll"};
-PNAME(user_aclk333_g2d_p) = { "fin_pll", "mout_sw_aclk333_g2d" };
-
-PNAME(audio0_p) = { "fin_pll", "cdclk0", "sclk_dpll", "sclk_mpll",
- "sclk_spll", "sclk_ipll", "sclk_epll", "sclk_rpll" };
-PNAME(audio1_p) = { "fin_pll", "cdclk1", "sclk_dpll", "sclk_mpll",
- "sclk_spll", "sclk_ipll", "sclk_epll", "sclk_rpll" };
-PNAME(audio2_p) = { "fin_pll", "cdclk2", "sclk_dpll", "sclk_mpll",
- "sclk_spll", "sclk_ipll", "sclk_epll", "sclk_rpll" };
-PNAME(spdif_p) = { "fin_pll", "dout_audio0", "dout_audio1", "dout_audio2",
- "spdif_extclk", "sclk_ipll", "sclk_epll", "sclk_rpll" };
-PNAME(hdmi_p) = { "dout_hdmi_pixel", "sclk_hdmiphy" };
-PNAME(maudio0_p) = { "fin_pll", "maudio_clk", "sclk_dpll", "sclk_mpll",
- "sclk_spll", "sclk_ipll", "sclk_epll", "sclk_rpll" };
+PNAME(mout_mspll_cpu_p) = {"mout_sclk_cpll", "mout_sclk_dpll",
+ "mout_sclk_mpll", "mout_sclk_spll"};
+PNAME(mout_cpu_p) = {"mout_apll" , "mout_mspll_cpu"};
+PNAME(mout_kfc_p) = {"mout_kpll" , "mout_mspll_kfc"};
+PNAME(mout_apll_p) = {"fin_pll", "fout_apll"};
+PNAME(mout_bpll_p) = {"fin_pll", "fout_bpll"};
+PNAME(mout_cpll_p) = {"fin_pll", "fout_cpll"};
+PNAME(mout_dpll_p) = {"fin_pll", "fout_dpll"};
+PNAME(mout_epll_p) = {"fin_pll", "fout_epll"};
+PNAME(mout_ipll_p) = {"fin_pll", "fout_ipll"};
+PNAME(mout_kpll_p) = {"fin_pll", "fout_kpll"};
+PNAME(mout_mpll_p) = {"fin_pll", "fout_mpll"};
+PNAME(mout_rpll_p) = {"fin_pll", "fout_rpll"};
+PNAME(mout_spll_p) = {"fin_pll", "fout_spll"};
+PNAME(mout_vpll_p) = {"fin_pll", "fout_vpll"};
+
+PNAME(mout_group1_p) = {"mout_sclk_cpll", "mout_sclk_dpll",
+ "mout_sclk_mpll"};
+PNAME(mout_group2_p) = {"fin_pll", "mout_sclk_cpll",
+ "mout_sclk_dpll", "mout_sclk_mpll", "mout_sclk_spll",
+ "mout_sclk_ipll", "mout_sclk_epll", "mout_sclk_rpll"};
+PNAME(mout_group3_p) = {"mout_sclk_rpll", "mout_sclk_spll"};
+PNAME(mout_group4_p) = {"mout_sclk_ipll", "mout_sclk_dpll", "mout_sclk_mpll"};
+PNAME(mout_group5_p) = {"mout_sclk_vpll", "mout_sclk_dpll"};
+
+PNAME(mout_fimd1_final_p) = {"mout_fimd1", "mout_fimd1_opt"};
+PNAME(mout_sw_aclk66_p) = {"dout_aclk66", "mout_sclk_spll"};
+PNAME(mout_user_aclk66_peric_p) = { "fin_pll", "mout_sw_aclk66"};
+PNAME(mout_user_pclk66_gpio_p) = {"mout_sw_aclk66", "ff_sw_aclk66"};
+
+PNAME(mout_sw_aclk200_fsys_p) = {"dout_aclk200_fsys", "mout_sclk_spll"};
+PNAME(mout_sw_pclk200_fsys_p) = {"dout_pclk200_fsys", "mout_sclk_spll"};
+PNAME(mout_user_pclk200_fsys_p) = {"fin_pll", "mout_sw_pclk200_fsys"};
+PNAME(mout_user_aclk200_fsys_p) = {"fin_pll", "mout_sw_aclk200_fsys"};
+
+PNAME(mout_sw_aclk200_fsys2_p) = {"dout_aclk200_fsys2", "mout_sclk_spll"};
+PNAME(mout_user_aclk200_fsys2_p) = {"fin_pll", "mout_sw_aclk200_fsys2"};
+PNAME(mout_sw_aclk100_noc_p) = {"dout_aclk100_noc", "mout_sclk_spll"};
+PNAME(mout_user_aclk100_noc_p) = {"fin_pll", "mout_sw_aclk100_noc"};
+
+PNAME(mout_sw_aclk400_wcore_p) = {"dout_aclk400_wcore", "mout_sclk_spll"};
+PNAME(mout_aclk400_wcore_bpll_p) = {"mout_aclk400_wcore", "sclk_bpll"};
+PNAME(mout_user_aclk400_wcore_p) = {"fin_pll", "mout_sw_aclk400_wcore"};
+
+PNAME(mout_sw_aclk400_isp_p) = {"dout_aclk400_isp", "mout_sclk_spll"};
+PNAME(mout_user_aclk400_isp_p) = {"fin_pll", "mout_sw_aclk400_isp"};
+
+PNAME(mout_sw_aclk333_432_isp0_p) = {"dout_aclk333_432_isp0",
+ "mout_sclk_spll"};
+PNAME(mout_user_aclk333_432_isp0_p) = {"fin_pll", "mout_sw_aclk333_432_isp0"};
+
+PNAME(mout_sw_aclk333_432_isp_p) = {"dout_aclk333_432_isp", "mout_sclk_spll"};
+PNAME(mout_user_aclk333_432_isp_p) = {"fin_pll", "mout_sw_aclk333_432_isp"};
+
+PNAME(mout_sw_aclk200_p) = {"dout_aclk200", "mout_sclk_spll"};
+PNAME(mout_user_aclk200_disp1_p) = {"fin_pll", "mout_sw_aclk200"};
+
+PNAME(mout_sw_aclk400_mscl_p) = {"dout_aclk400_mscl", "mout_sclk_spll"};
+PNAME(mout_user_aclk400_mscl_p) = {"fin_pll", "mout_sw_aclk400_mscl"};
+
+PNAME(mout_sw_aclk333_p) = {"dout_aclk333", "mout_sclk_spll"};
+PNAME(mout_user_aclk333_p) = {"fin_pll", "mout_sw_aclk333"};
+
+PNAME(mout_sw_aclk166_p) = {"dout_aclk166", "mout_sclk_spll"};
+PNAME(mout_user_aclk166_p) = {"fin_pll", "mout_sw_aclk166"};
+
+PNAME(mout_sw_aclk266_p) = {"dout_aclk266", "mout_sclk_spll"};
+PNAME(mout_user_aclk266_p) = {"fin_pll", "mout_sw_aclk266"};
+PNAME(mout_user_aclk266_isp_p) = {"fin_pll", "mout_sw_aclk266"};
+
+PNAME(mout_sw_aclk333_432_gscl_p) = {"dout_aclk333_432_gscl", "mout_sclk_spll"};
+PNAME(mout_user_aclk333_432_gscl_p) = {"fin_pll", "mout_sw_aclk333_432_gscl"};
+
+PNAME(mout_sw_aclk300_gscl_p) = {"dout_aclk300_gscl", "mout_sclk_spll"};
+PNAME(mout_user_aclk300_gscl_p) = {"fin_pll", "mout_sw_aclk300_gscl"};
+
+PNAME(mout_sw_aclk300_disp1_p) = {"dout_aclk300_disp1", "mout_sclk_spll"};
+PNAME(mout_sw_aclk400_disp1_p) = {"dout_aclk400_disp1", "mout_sclk_spll"};
+PNAME(mout_user_aclk300_disp1_p) = {"fin_pll", "mout_sw_aclk300_disp1"};
+PNAME(mout_user_aclk400_disp1_p) = {"fin_pll", "mout_sw_aclk400_disp1"};
+
+PNAME(mout_sw_aclk300_jpeg_p) = {"dout_aclk300_jpeg", "mout_sclk_spll"};
+PNAME(mout_user_aclk300_jpeg_p) = {"fin_pll", "mout_sw_aclk300_jpeg"};
+
+PNAME(mout_sw_aclk_g3d_p) = {"dout_aclk_g3d", "mout_sclk_spll"};
+PNAME(mout_user_aclk_g3d_p) = {"fin_pll", "mout_sw_aclk_g3d"};
+
+PNAME(mout_sw_aclk266_g2d_p) = {"dout_aclk266_g2d", "mout_sclk_spll"};
+PNAME(mout_user_aclk266_g2d_p) = {"fin_pll", "mout_sw_aclk266_g2d"};
+
+PNAME(mout_sw_aclk333_g2d_p) = {"dout_aclk333_g2d", "mout_sclk_spll"};
+PNAME(mout_user_aclk333_g2d_p) = {"fin_pll", "mout_sw_aclk333_g2d"};
+
+PNAME(mout_audio0_p) = {"fin_pll", "cdclk0", "mout_sclk_dpll",
+ "mout_sclk_mpll", "mout_sclk_spll", "mout_sclk_ipll",
+ "mout_sclk_epll", "mout_sclk_rpll"};
+PNAME(mout_audio1_p) = {"fin_pll", "cdclk1", "mout_sclk_dpll",
+ "mout_sclk_mpll", "mout_sclk_spll", "mout_sclk_ipll",
+ "mout_sclk_epll", "mout_sclk_rpll"};
+PNAME(mout_audio2_p) = {"fin_pll", "cdclk2", "mout_sclk_dpll",
+ "mout_sclk_mpll", "mout_sclk_spll", "mout_sclk_ipll",
+ "mout_sclk_epll", "mout_sclk_rpll"};
+PNAME(mout_spdif_p) = {"fin_pll", "dout_audio0", "dout_audio1",
+ "dout_audio2", "spdif_extclk", "mout_sclk_ipll",
+ "mout_sclk_epll", "mout_sclk_rpll"};
+PNAME(mout_hdmi_p) = {"dout_hdmi_pixel", "sclk_hdmiphy"};
+PNAME(mout_maudio0_p) = {"fin_pll", "maudio_clk", "mout_sclk_dpll",
+ "mout_sclk_mpll", "mout_sclk_spll", "mout_sclk_ipll",
+ "mout_sclk_epll", "mout_sclk_rpll"};
+PNAME(mout_mau_epll_clk_p) = {"mout_sclk_epll", "mout_sclk_dpll",
+ "mout_sclk_mpll", "mout_sclk_spll"};
+/* List of parents specific to exynos5800 */
+PNAME(mout_epll2_5800_p) = { "mout_sclk_epll", "ff_dout_epll2" };
+PNAME(mout_group1_5800_p) = { "mout_sclk_cpll", "mout_sclk_dpll",
+ "mout_sclk_mpll", "ff_dout_spll2" };
+PNAME(mout_group2_5800_p) = { "mout_sclk_cpll", "mout_sclk_dpll",
+ "mout_sclk_mpll", "ff_dout_spll2",
+ "mout_epll2", "mout_sclk_ipll" };
+PNAME(mout_group3_5800_p) = { "mout_sclk_cpll", "mout_sclk_dpll",
+ "mout_sclk_mpll", "ff_dout_spll2",
+ "mout_epll2" };
+PNAME(mout_group5_5800_p) = { "mout_sclk_cpll", "mout_sclk_dpll",
+ "mout_sclk_mpll", "mout_sclk_spll" };
+PNAME(mout_group6_5800_p) = { "mout_sclk_ipll", "mout_sclk_dpll",
+ "mout_sclk_mpll", "ff_dout_spll2" };
+PNAME(mout_group7_5800_p) = { "mout_sclk_cpll", "mout_sclk_dpll",
+ "mout_sclk_mpll", "mout_sclk_spll",
+ "mout_epll2", "mout_sclk_ipll" };
+PNAME(mout_mau_epll_clk_5800_p) = { "mout_sclk_epll", "mout_sclk_dpll",
+ "mout_sclk_mpll",
+ "ff_dout_spll2" };
+PNAME(mout_group8_5800_p) = { "dout_aclk432_scaler", "dout_sclk_sw" };
+PNAME(mout_group9_5800_p) = { "dout_osc_div", "mout_sw_aclk432_scaler" };
+PNAME(mout_group10_5800_p) = { "dout_aclk432_cam", "dout_sclk_sw" };
+PNAME(mout_group11_5800_p) = { "dout_osc_div", "mout_sw_aclk432_cam" };
+PNAME(mout_group12_5800_p) = { "dout_aclkfl1_550_cam", "dout_sclk_sw" };
+PNAME(mout_group13_5800_p) = { "dout_osc_div", "mout_sw_aclkfl1_550_cam" };
+PNAME(mout_group14_5800_p) = { "dout_aclk550_cam", "dout_sclk_sw" };
+PNAME(mout_group15_5800_p) = { "dout_osc_div", "mout_sw_aclk550_cam" };
/* fixed rate clocks generated outside the soc */
-static struct samsung_fixed_rate_clock exynos5420_fixed_rate_ext_clks[] __initdata = {
+static struct samsung_fixed_rate_clock
+ exynos5x_fixed_rate_ext_clks[] __initdata = {
FRATE(CLK_FIN_PLL, "fin_pll", NULL, CLK_IS_ROOT, 0),
};
/* fixed rate clocks generated inside the soc */
-static struct samsung_fixed_rate_clock exynos5420_fixed_rate_clks[] __initdata = {
+static struct samsung_fixed_rate_clock exynos5x_fixed_rate_clks[] __initdata = {
FRATE(CLK_SCLK_HDMIPHY, "sclk_hdmiphy", NULL, CLK_IS_ROOT, 24000000),
FRATE(0, "sclk_pwi", NULL, CLK_IS_ROOT, 24000000),
FRATE(0, "sclk_usbh20", NULL, CLK_IS_ROOT, 48000000),
@@ -310,146 +462,309 @@ static struct samsung_fixed_rate_clock exynos5420_fixed_rate_clks[] __initdata =
FRATE(0, "sclk_usbh20_scan_clk", NULL, CLK_IS_ROOT, 480000000),
};
-static struct samsung_fixed_factor_clock exynos5420_fixed_factor_clks[] __initdata = {
- FFACTOR(0, "sclk_hsic_12m", "fin_pll", 1, 2, 0),
+static struct samsung_fixed_factor_clock
+ exynos5x_fixed_factor_clks[] __initdata = {
+ FFACTOR(0, "ff_hsic_12m", "fin_pll", 1, 2, 0),
+ FFACTOR(0, "ff_sw_aclk66", "mout_sw_aclk66", 1, 2, 0),
};
-static struct samsung_mux_clock exynos5420_mux_clks[] __initdata = {
- MUX(0, "mout_mspll_kfc", mspll_cpu_p, SRC_TOP7, 8, 2),
- MUX(0, "mout_mspll_cpu", mspll_cpu_p, SRC_TOP7, 12, 2),
- MUX(0, "mout_apll", apll_p, SRC_CPU, 0, 1),
- MUX(0, "mout_cpu", cpu_p, SRC_CPU, 16, 1),
- MUX(0, "mout_kpll", kpll_p, SRC_KFC, 0, 1),
- MUX(0, "mout_cpu_kfc", kfc_p, SRC_KFC, 16, 1),
-
- MUX(0, "sclk_bpll", bpll_p, SRC_CDREX, 0, 1),
-
- MUX_A(0, "mout_aclk400_mscl", group1_p,
- SRC_TOP0, 4, 2, "aclk400_mscl"),
- MUX(0, "mout_aclk200", group1_p, SRC_TOP0, 8, 2),
- MUX(0, "mout_aclk200_fsys2", group1_p, SRC_TOP0, 12, 2),
- MUX(0, "mout_aclk200_fsys", group1_p, SRC_TOP0, 28, 2),
-
- MUX(0, "mout_aclk333_432_gscl", group4_p, SRC_TOP1, 0, 2),
- MUX(0, "mout_aclk66", group1_p, SRC_TOP1, 8, 2),
- MUX(0, "mout_aclk266", group1_p, SRC_TOP1, 20, 2),
- MUX(0, "mout_aclk166", group1_p, SRC_TOP1, 24, 2),
- MUX(0, "mout_aclk333", group1_p, SRC_TOP1, 28, 2),
-
- MUX(0, "mout_aclk333_g2d", group1_p, SRC_TOP2, 8, 2),
- MUX(0, "mout_aclk266_g2d", group1_p, SRC_TOP2, 12, 2),
- MUX(0, "mout_aclk_g3d", group5_p, SRC_TOP2, 16, 1),
- MUX(0, "mout_aclk300_jpeg", group1_p, SRC_TOP2, 20, 2),
- MUX(0, "mout_aclk300_disp1", group1_p, SRC_TOP2, 24, 2),
- MUX(0, "mout_aclk300_gscl", group1_p, SRC_TOP2, 28, 2),
-
- MUX(0, "mout_user_aclk400_mscl", user_aclk400_mscl_p,
+static struct samsung_fixed_factor_clock
+ exynos5800_fixed_factor_clks[] __initdata = {
+ FFACTOR(0, "ff_dout_epll2", "mout_sclk_epll", 1, 2, 0),
+ FFACTOR(0, "ff_dout_spll2", "mout_sclk_spll", 1, 2, 0),
+};
+
+struct samsung_mux_clock exynos5800_mux_clks[] __initdata = {
+ MUX(0, "mout_aclk400_isp", mout_group3_5800_p, SRC_TOP0, 0, 3),
+ MUX(0, "mout_aclk400_mscl", mout_group3_5800_p, SRC_TOP0, 4, 3),
+ MUX(0, "mout_aclk400_wcore", mout_group2_5800_p, SRC_TOP0, 16, 3),
+ MUX(0, "mout_aclk100_noc", mout_group1_5800_p, SRC_TOP0, 20, 2),
+
+ MUX(0, "mout_aclk333_432_gscl", mout_group6_5800_p, SRC_TOP1, 0, 2),
+ MUX(0, "mout_aclk333_432_isp", mout_group6_5800_p, SRC_TOP1, 4, 2),
+ MUX(0, "mout_aclk333_432_isp0", mout_group6_5800_p, SRC_TOP1, 12, 2),
+ MUX(0, "mout_aclk266", mout_group5_5800_p, SRC_TOP1, 20, 2),
+ MUX(0, "mout_aclk333", mout_group1_5800_p, SRC_TOP1, 28, 2),
+
+ MUX(0, "mout_aclk400_disp1", mout_group7_5800_p, SRC_TOP2, 4, 3),
+ MUX(0, "mout_aclk333_g2d", mout_group5_5800_p, SRC_TOP2, 8, 2),
+ MUX(0, "mout_aclk266_g2d", mout_group5_5800_p, SRC_TOP2, 12, 2),
+ MUX(0, "mout_aclk300_jpeg", mout_group5_5800_p, SRC_TOP2, 20, 2),
+ MUX(0, "mout_aclk300_disp1", mout_group5_5800_p, SRC_TOP2, 24, 2),
+ MUX(0, "mout_aclk300_gscl", mout_group5_5800_p, SRC_TOP2, 28, 2),
+
+ MUX(0, "mout_mau_epll_clk", mout_mau_epll_clk_5800_p, SRC_TOP7,
+ 20, 2),
+ MUX(0, "sclk_bpll", mout_bpll_p, SRC_TOP7, 24, 1),
+ MUX(0, "mout_epll2", mout_epll2_5800_p, SRC_TOP7, 28, 1),
+
+ MUX(0, "mout_aclk550_cam", mout_group3_5800_p, SRC_TOP8, 16, 3),
+ MUX(0, "mout_aclkfl1_550_cam", mout_group3_5800_p, SRC_TOP8, 20, 3),
+ MUX(0, "mout_aclk432_cam", mout_group6_5800_p, SRC_TOP8, 24, 2),
+ MUX(0, "mout_aclk432_scaler", mout_group6_5800_p, SRC_TOP8, 28, 2),
+
+ MUX(0, "mout_user_aclk550_cam", mout_group15_5800_p,
+ SRC_TOP9, 16, 1),
+ MUX(0, "mout_user_aclkfl1_550_cam", mout_group13_5800_p,
+ SRC_TOP9, 20, 1),
+ MUX(0, "mout_user_aclk432_cam", mout_group11_5800_p,
+ SRC_TOP9, 24, 1),
+ MUX(0, "mout_user_aclk432_scaler", mout_group9_5800_p,
+ SRC_TOP9, 28, 1),
+
+ MUX(0, "mout_sw_aclk550_cam", mout_group14_5800_p, SRC_TOP13, 16, 1),
+ MUX(0, "mout_sw_aclkfl1_550_cam", mout_group12_5800_p,
+ SRC_TOP13, 20, 1),
+ MUX(0, "mout_sw_aclk432_cam", mout_group10_5800_p,
+ SRC_TOP13, 24, 1),
+ MUX(0, "mout_sw_aclk432_scaler", mout_group8_5800_p,
+ SRC_TOP13, 28, 1),
+
+ MUX(0, "mout_fimd1", mout_group2_p, SRC_DISP10, 4, 3),
+};
+
+struct samsung_div_clock exynos5800_div_clks[] __initdata = {
+ DIV(0, "dout_aclk400_wcore", "mout_aclk400_wcore", DIV_TOP0, 16, 3),
+
+ DIV(0, "dout_aclk550_cam", "mout_aclk550_cam",
+ DIV_TOP8, 16, 3),
+ DIV(0, "dout_aclkfl1_550_cam", "mout_aclkfl1_550_cam",
+ DIV_TOP8, 20, 3),
+ DIV(0, "dout_aclk432_cam", "mout_aclk432_cam",
+ DIV_TOP8, 24, 3),
+ DIV(0, "dout_aclk432_scaler", "mout_aclk432_scaler",
+ DIV_TOP8, 28, 3),
+
+ DIV(0, "dout_osc_div", "fin_pll", DIV_TOP9, 20, 3),
+ DIV(0, "dout_sclk_sw", "sclk_spll", DIV_TOP9, 24, 6),
+};
+
+struct samsung_gate_clock exynos5800_gate_clks[] __initdata = {
+ GATE(CLK_ACLK550_CAM, "aclk550_cam", "mout_user_aclk550_cam",
+ GATE_BUS_TOP, 24, 0, 0),
+ GATE(CLK_ACLK432_SCALER, "aclk432_scaler", "mout_user_aclk432_scaler",
+ GATE_BUS_TOP, 27, 0, 0),
+};
+
+struct samsung_mux_clock exynos5420_mux_clks[] __initdata = {
+ MUX(0, "sclk_bpll", mout_bpll_p, TOP_SPARE2, 0, 1),
+ MUX(0, "mout_aclk400_wcore_bpll", mout_aclk400_wcore_bpll_p,
+ TOP_SPARE2, 4, 1),
+
+ MUX(0, "mout_aclk400_isp", mout_group1_p, SRC_TOP0, 0, 2),
+ MUX_A(0, "mout_aclk400_mscl", mout_group1_p,
+ SRC_TOP0, 4, 2, "aclk400_mscl"),
+ MUX(0, "mout_aclk400_wcore", mout_group1_p, SRC_TOP0, 16, 2),
+ MUX(0, "mout_aclk100_noc", mout_group1_p, SRC_TOP0, 20, 2),
+
+ MUX(0, "mout_aclk333_432_gscl", mout_group4_p, SRC_TOP1, 0, 2),
+ MUX(0, "mout_aclk333_432_isp", mout_group4_p,
+ SRC_TOP1, 4, 2),
+ MUX(0, "mout_aclk333_432_isp0", mout_group4_p, SRC_TOP1, 12, 2),
+ MUX(0, "mout_aclk266", mout_group1_p, SRC_TOP1, 20, 2),
+ MUX(0, "mout_aclk333", mout_group1_p, SRC_TOP1, 28, 2),
+
+ MUX(0, "mout_aclk400_disp1", mout_group1_p, SRC_TOP2, 4, 2),
+ MUX(0, "mout_aclk333_g2d", mout_group1_p, SRC_TOP2, 8, 2),
+ MUX(0, "mout_aclk266_g2d", mout_group1_p, SRC_TOP2, 12, 2),
+ MUX(0, "mout_aclk300_jpeg", mout_group1_p, SRC_TOP2, 20, 2),
+ MUX(0, "mout_aclk300_disp1", mout_group1_p, SRC_TOP2, 24, 2),
+ MUX(0, "mout_aclk300_gscl", mout_group1_p, SRC_TOP2, 28, 2),
+
+ MUX(0, "mout_mau_epll_clk", mout_mau_epll_clk_p, SRC_TOP7, 20, 2),
+
+ MUX(0, "mout_fimd1", mout_group3_p, SRC_DISP10, 4, 1),
+};
+
+struct samsung_div_clock exynos5420_div_clks[] __initdata = {
+ DIV(0, "dout_aclk400_wcore", "mout_aclk400_wcore_bpll",
+ DIV_TOP0, 16, 3),
+};
+
+static struct samsung_mux_clock exynos5x_mux_clks[] __initdata = {
+ MUX(0, "mout_user_pclk66_gpio", mout_user_pclk66_gpio_p,
+ SRC_TOP7, 4, 1),
+ MUX(0, "mout_mspll_kfc", mout_mspll_cpu_p, SRC_TOP7, 8, 2),
+ MUX(0, "mout_mspll_cpu", mout_mspll_cpu_p, SRC_TOP7, 12, 2),
+
+ MUX(0, "mout_apll", mout_apll_p, SRC_CPU, 0, 1),
+ MUX(0, "mout_cpu", mout_cpu_p, SRC_CPU, 16, 1),
+ MUX(0, "mout_kpll", mout_kpll_p, SRC_KFC, 0, 1),
+ MUX(0, "mout_kfc", mout_kfc_p, SRC_KFC, 16, 1),
+
+ MUX(0, "mout_aclk200", mout_group1_p, SRC_TOP0, 8, 2),
+ MUX(0, "mout_aclk200_fsys2", mout_group1_p, SRC_TOP0, 12, 2),
+ MUX(0, "mout_pclk200_fsys", mout_group1_p, SRC_TOP0, 24, 2),
+ MUX(0, "mout_aclk200_fsys", mout_group1_p, SRC_TOP0, 28, 2),
+
+ MUX(0, "mout_aclk66", mout_group1_p, SRC_TOP1, 8, 2),
+ MUX(0, "mout_aclk166", mout_group1_p, SRC_TOP1, 24, 2),
+
+ MUX(0, "mout_aclk_g3d", mout_group5_p, SRC_TOP2, 16, 1),
+
+ MUX(0, "mout_user_aclk400_isp", mout_user_aclk400_isp_p,
+ SRC_TOP3, 0, 1),
+ MUX(0, "mout_user_aclk400_mscl", mout_user_aclk400_mscl_p,
SRC_TOP3, 4, 1),
- MUX_A(0, "mout_aclk200_disp1", aclk200_disp1_p,
- SRC_TOP3, 8, 1, "aclk200_disp1"),
- MUX(0, "mout_user_aclk200_fsys2", user_aclk200_fsys2_p,
+ MUX(0, "mout_user_aclk200_disp1", mout_user_aclk200_disp1_p,
+ SRC_TOP3, 8, 1),
+ MUX(0, "mout_user_aclk200_fsys2", mout_user_aclk200_fsys2_p,
SRC_TOP3, 12, 1),
- MUX(0, "mout_user_aclk200_fsys", user_aclk200_fsys_p,
+ MUX(0, "mout_user_aclk400_wcore", mout_user_aclk400_wcore_p,
+ SRC_TOP3, 16, 1),
+ MUX(0, "mout_user_aclk100_noc", mout_user_aclk100_noc_p,
+ SRC_TOP3, 20, 1),
+ MUX(0, "mout_user_pclk200_fsys", mout_user_pclk200_fsys_p,
+ SRC_TOP3, 24, 1),
+ MUX(0, "mout_user_aclk200_fsys", mout_user_aclk200_fsys_p,
SRC_TOP3, 28, 1),
- MUX(0, "mout_user_aclk333_432_gscl", user_aclk333_432_gscl_p,
+ MUX(0, "mout_user_aclk333_432_gscl", mout_user_aclk333_432_gscl_p,
SRC_TOP4, 0, 1),
- MUX(0, "mout_aclk66_peric", aclk66_peric_p, SRC_TOP4, 8, 1),
- MUX(0, "mout_user_aclk266", user_aclk266_p, SRC_TOP4, 20, 1),
- MUX(0, "mout_user_aclk166", user_aclk166_p, SRC_TOP4, 24, 1),
- MUX(0, "mout_user_aclk333", user_aclk333_p, SRC_TOP4, 28, 1),
-
- MUX(0, "mout_aclk66_psgen", aclk66_peric_p, SRC_TOP5, 4, 1),
- MUX(0, "mout_user_aclk333_g2d", user_aclk333_g2d_p, SRC_TOP5, 8, 1),
- MUX(0, "mout_user_aclk266_g2d", user_aclk266_g2d_p, SRC_TOP5, 12, 1),
- MUX_A(0, "mout_user_aclk_g3d", user_aclk_g3d_p,
- SRC_TOP5, 16, 1, "aclkg3d"),
- MUX(0, "mout_user_aclk300_jpeg", user_aclk300_jpeg_p,
+ MUX(0, "mout_user_aclk333_432_isp", mout_user_aclk333_432_isp_p,
+ SRC_TOP4, 4, 1),
+ MUX(0, "mout_user_aclk66_peric", mout_user_aclk66_peric_p,
+ SRC_TOP4, 8, 1),
+ MUX(0, "mout_user_aclk333_432_isp0", mout_user_aclk333_432_isp0_p,
+ SRC_TOP4, 12, 1),
+ MUX(0, "mout_user_aclk266_isp", mout_user_aclk266_isp_p,
+ SRC_TOP4, 16, 1),
+ MUX(0, "mout_user_aclk266", mout_user_aclk266_p, SRC_TOP4, 20, 1),
+ MUX(0, "mout_user_aclk166", mout_user_aclk166_p, SRC_TOP4, 24, 1),
+ MUX(0, "mout_user_aclk333", mout_user_aclk333_p, SRC_TOP4, 28, 1),
+
+ MUX(0, "mout_user_aclk400_disp1", mout_user_aclk400_disp1_p,
+ SRC_TOP5, 0, 1),
+ MUX(0, "mout_user_aclk66_psgen", mout_user_aclk66_peric_p,
+ SRC_TOP5, 4, 1),
+ MUX(0, "mout_user_aclk333_g2d", mout_user_aclk333_g2d_p,
+ SRC_TOP5, 8, 1),
+ MUX(0, "mout_user_aclk266_g2d", mout_user_aclk266_g2d_p,
+ SRC_TOP5, 12, 1),
+ MUX(CLK_MOUT_G3D, "mout_user_aclk_g3d", mout_user_aclk_g3d_p,
+ SRC_TOP5, 16, 1),
+ MUX(0, "mout_user_aclk300_jpeg", mout_user_aclk300_jpeg_p,
SRC_TOP5, 20, 1),
- MUX(0, "mout_user_aclk300_disp1", user_aclk300_disp1_p,
+ MUX(0, "mout_user_aclk300_disp1", mout_user_aclk300_disp1_p,
SRC_TOP5, 24, 1),
- MUX(0, "mout_user_aclk300_gscl", user_aclk300_gscl_p,
+ MUX(0, "mout_user_aclk300_gscl", mout_user_aclk300_gscl_p,
SRC_TOP5, 28, 1),
- MUX(0, "sclk_mpll", mpll_p, SRC_TOP6, 0, 1),
- MUX(0, "sclk_vpll", vpll_p, SRC_TOP6, 4, 1),
- MUX(0, "sclk_spll", spll_p, SRC_TOP6, 8, 1),
- MUX(0, "sclk_ipll", ipll_p, SRC_TOP6, 12, 1),
- MUX(0, "sclk_rpll", rpll_p, SRC_TOP6, 16, 1),
- MUX(0, "sclk_epll", epll_p, SRC_TOP6, 20, 1),
- MUX(0, "sclk_dpll", dpll_p, SRC_TOP6, 24, 1),
- MUX(0, "sclk_cpll", cpll_p, SRC_TOP6, 28, 1),
-
- MUX(0, "mout_sw_aclk400_mscl", sw_aclk400_mscl_p, SRC_TOP10, 4, 1),
- MUX(0, "mout_sw_aclk200", sw_aclk200_p, SRC_TOP10, 8, 1),
- MUX(0, "mout_sw_aclk200_fsys2", sw_aclk200_fsys2_p,
+ MUX(0, "mout_sclk_mpll", mout_mpll_p, SRC_TOP6, 0, 1),
+ MUX(CLK_MOUT_VPLL, "mout_sclk_vpll", mout_vpll_p, SRC_TOP6, 4, 1),
+ MUX(0, "mout_sclk_spll", mout_spll_p, SRC_TOP6, 8, 1),
+ MUX(0, "mout_sclk_ipll", mout_ipll_p, SRC_TOP6, 12, 1),
+ MUX(0, "mout_sclk_rpll", mout_rpll_p, SRC_TOP6, 16, 1),
+ MUX(0, "mout_sclk_epll", mout_epll_p, SRC_TOP6, 20, 1),
+ MUX(0, "mout_sclk_dpll", mout_dpll_p, SRC_TOP6, 24, 1),
+ MUX(0, "mout_sclk_cpll", mout_cpll_p, SRC_TOP6, 28, 1),
+
+ MUX(0, "mout_sw_aclk400_isp", mout_sw_aclk400_isp_p,
+ SRC_TOP10, 0, 1),
+ MUX(0, "mout_sw_aclk400_mscl", mout_sw_aclk400_mscl_p,
+ SRC_TOP10, 4, 1),
+ MUX(0, "mout_sw_aclk200", mout_sw_aclk200_p, SRC_TOP10, 8, 1),
+ MUX(0, "mout_sw_aclk200_fsys2", mout_sw_aclk200_fsys2_p,
SRC_TOP10, 12, 1),
- MUX(0, "mout_sw_aclk200_fsys", sw_aclk200_fsys_p, SRC_TOP10, 28, 1),
-
- MUX(0, "mout_sw_aclk333_432_gscl", sw_aclk333_432_gscl_p,
+ MUX(0, "mout_sw_aclk400_wcore", mout_sw_aclk400_wcore_p,
+ SRC_TOP10, 16, 1),
+ MUX(0, "mout_sw_aclk100_noc", mout_sw_aclk100_noc_p,
+ SRC_TOP10, 20, 1),
+ MUX(0, "mout_sw_pclk200_fsys", mout_sw_pclk200_fsys_p,
+ SRC_TOP10, 24, 1),
+ MUX(0, "mout_sw_aclk200_fsys", mout_sw_aclk200_fsys_p,
+ SRC_TOP10, 28, 1),
+
+ MUX(0, "mout_sw_aclk333_432_gscl", mout_sw_aclk333_432_gscl_p,
SRC_TOP11, 0, 1),
- MUX(0, "mout_sw_aclk66", sw_aclk66_p, SRC_TOP11, 8, 1),
- MUX(0, "mout_sw_aclk266", sw_aclk266_p, SRC_TOP11, 20, 1),
- MUX(0, "mout_sw_aclk166", sw_aclk166_p, SRC_TOP11, 24, 1),
- MUX(0, "mout_sw_aclk333", sw_aclk333_p, SRC_TOP11, 28, 1),
-
- MUX(0, "mout_sw_aclk333_g2d", sw_aclk333_g2d_p, SRC_TOP12, 8, 1),
- MUX(0, "mout_sw_aclk266_g2d", sw_aclk266_g2d_p, SRC_TOP12, 12, 1),
- MUX(0, "mout_sw_aclk_g3d", sw_aclk_g3d_p, SRC_TOP12, 16, 1),
- MUX(0, "mout_sw_aclk300_jpeg", sw_aclk300_jpeg_p, SRC_TOP12, 20, 1),
- MUX(0, "mout_sw_aclk300_disp1", sw_aclk300_disp1_p,
+ MUX(0, "mout_sw_aclk333_432_isp", mout_sw_aclk333_432_isp_p,
+ SRC_TOP11, 4, 1),
+ MUX(0, "mout_sw_aclk66", mout_sw_aclk66_p, SRC_TOP11, 8, 1),
+ MUX(0, "mout_sw_aclk333_432_isp0", mout_sw_aclk333_432_isp0_p,
+ SRC_TOP11, 12, 1),
+ MUX(0, "mout_sw_aclk266", mout_sw_aclk266_p, SRC_TOP11, 20, 1),
+ MUX(0, "mout_sw_aclk166", mout_sw_aclk166_p, SRC_TOP11, 24, 1),
+ MUX(0, "mout_sw_aclk333", mout_sw_aclk333_p, SRC_TOP11, 28, 1),
+
+ MUX(0, "mout_sw_aclk400_disp1", mout_sw_aclk400_disp1_p,
+ SRC_TOP12, 4, 1),
+ MUX(0, "mout_sw_aclk333_g2d", mout_sw_aclk333_g2d_p,
+ SRC_TOP12, 8, 1),
+ MUX(0, "mout_sw_aclk266_g2d", mout_sw_aclk266_g2d_p,
+ SRC_TOP12, 12, 1),
+ MUX(0, "mout_sw_aclk_g3d", mout_sw_aclk_g3d_p, SRC_TOP12, 16, 1),
+ MUX(0, "mout_sw_aclk300_jpeg", mout_sw_aclk300_jpeg_p,
+ SRC_TOP12, 20, 1),
+ MUX(0, "mout_sw_aclk300_disp1", mout_sw_aclk300_disp1_p,
SRC_TOP12, 24, 1),
- MUX(0, "mout_sw_aclk300_gscl", sw_aclk300_gscl_p, SRC_TOP12, 28, 1),
+ MUX(0, "mout_sw_aclk300_gscl", mout_sw_aclk300_gscl_p,
+ SRC_TOP12, 28, 1),
/* DISP1 Block */
- MUX(0, "mout_fimd1", group3_p, SRC_DISP10, 4, 1),
- MUX(0, "mout_mipi1", group2_p, SRC_DISP10, 16, 3),
- MUX(0, "mout_dp1", group2_p, SRC_DISP10, 20, 3),
- MUX(0, "mout_pixel", group2_p, SRC_DISP10, 24, 3),
- MUX(CLK_MOUT_HDMI, "mout_hdmi", hdmi_p, SRC_DISP10, 28, 1),
+ MUX(0, "mout_mipi1", mout_group2_p, SRC_DISP10, 16, 3),
+ MUX(0, "mout_dp1", mout_group2_p, SRC_DISP10, 20, 3),
+ MUX(0, "mout_pixel", mout_group2_p, SRC_DISP10, 24, 3),
+ MUX(CLK_MOUT_HDMI, "mout_hdmi", mout_hdmi_p, SRC_DISP10, 28, 1),
+ MUX(0, "mout_fimd1_opt", mout_group2_p, SRC_DISP10, 8, 3),
+
+ MUX(0, "mout_fimd1_final", mout_fimd1_final_p, TOP_SPARE2, 8, 1),
/* MAU Block */
- MUX(0, "mout_maudio0", maudio0_p, SRC_MAU, 28, 3),
+ MUX(CLK_MOUT_MAUDIO0, "mout_maudio0", mout_maudio0_p, SRC_MAU, 28, 3),
/* FSYS Block */
- MUX(0, "mout_usbd301", group2_p, SRC_FSYS, 4, 3),
- MUX(0, "mout_mmc0", group2_p, SRC_FSYS, 8, 3),
- MUX(0, "mout_mmc1", group2_p, SRC_FSYS, 12, 3),
- MUX(0, "mout_mmc2", group2_p, SRC_FSYS, 16, 3),
- MUX(0, "mout_usbd300", group2_p, SRC_FSYS, 20, 3),
- MUX(0, "mout_unipro", group2_p, SRC_FSYS, 24, 3),
+ MUX(0, "mout_usbd301", mout_group2_p, SRC_FSYS, 4, 3),
+ MUX(0, "mout_mmc0", mout_group2_p, SRC_FSYS, 8, 3),
+ MUX(0, "mout_mmc1", mout_group2_p, SRC_FSYS, 12, 3),
+ MUX(0, "mout_mmc2", mout_group2_p, SRC_FSYS, 16, 3),
+ MUX(0, "mout_usbd300", mout_group2_p, SRC_FSYS, 20, 3),
+ MUX(0, "mout_unipro", mout_group2_p, SRC_FSYS, 24, 3),
+ MUX(0, "mout_mphy_refclk", mout_group2_p, SRC_FSYS, 28, 3),
/* PERIC Block */
- MUX(0, "mout_uart0", group2_p, SRC_PERIC0, 4, 3),
- MUX(0, "mout_uart1", group2_p, SRC_PERIC0, 8, 3),
- MUX(0, "mout_uart2", group2_p, SRC_PERIC0, 12, 3),
- MUX(0, "mout_uart3", group2_p, SRC_PERIC0, 16, 3),
- MUX(0, "mout_pwm", group2_p, SRC_PERIC0, 24, 3),
- MUX(0, "mout_spdif", spdif_p, SRC_PERIC0, 28, 3),
- MUX(0, "mout_audio0", audio0_p, SRC_PERIC1, 8, 3),
- MUX(0, "mout_audio1", audio1_p, SRC_PERIC1, 12, 3),
- MUX(0, "mout_audio2", audio2_p, SRC_PERIC1, 16, 3),
- MUX(0, "mout_spi0", group2_p, SRC_PERIC1, 20, 3),
- MUX(0, "mout_spi1", group2_p, SRC_PERIC1, 24, 3),
- MUX(0, "mout_spi2", group2_p, SRC_PERIC1, 28, 3),
+ MUX(0, "mout_uart0", mout_group2_p, SRC_PERIC0, 4, 3),
+ MUX(0, "mout_uart1", mout_group2_p, SRC_PERIC0, 8, 3),
+ MUX(0, "mout_uart2", mout_group2_p, SRC_PERIC0, 12, 3),
+ MUX(0, "mout_uart3", mout_group2_p, SRC_PERIC0, 16, 3),
+ MUX(0, "mout_pwm", mout_group2_p, SRC_PERIC0, 24, 3),
+ MUX(0, "mout_spdif", mout_spdif_p, SRC_PERIC0, 28, 3),
+ MUX(0, "mout_audio0", mout_audio0_p, SRC_PERIC1, 8, 3),
+ MUX(0, "mout_audio1", mout_audio1_p, SRC_PERIC1, 12, 3),
+ MUX(0, "mout_audio2", mout_audio2_p, SRC_PERIC1, 16, 3),
+ MUX(0, "mout_spi0", mout_group2_p, SRC_PERIC1, 20, 3),
+ MUX(0, "mout_spi1", mout_group2_p, SRC_PERIC1, 24, 3),
+ MUX(0, "mout_spi2", mout_group2_p, SRC_PERIC1, 28, 3),
+
+ /* ISP Block */
+ MUX(0, "mout_pwm_isp", mout_group2_p, SRC_ISP, 24, 3),
+ MUX(0, "mout_uart_isp", mout_group2_p, SRC_ISP, 20, 3),
+ MUX(0, "mout_spi0_isp", mout_group2_p, SRC_ISP, 12, 3),
+ MUX(0, "mout_spi1_isp", mout_group2_p, SRC_ISP, 16, 3),
+ MUX(0, "mout_isp_sensor", mout_group2_p, SRC_ISP, 28, 3),
};
-static struct samsung_div_clock exynos5420_div_clks[] __initdata = {
+static struct samsung_div_clock exynos5x_div_clks[] __initdata = {
DIV(0, "div_arm", "mout_cpu", DIV_CPU0, 0, 3),
DIV(0, "sclk_apll", "mout_apll", DIV_CPU0, 24, 3),
DIV(0, "armclk2", "div_arm", DIV_CPU0, 28, 3),
- DIV(0, "div_kfc", "mout_cpu_kfc", DIV_KFC0, 0, 3),
+ DIV(0, "div_kfc", "mout_kfc", DIV_KFC0, 0, 3),
DIV(0, "sclk_kpll", "mout_kpll", DIV_KFC0, 24, 3),
+ DIV(0, "dout_aclk400_isp", "mout_aclk400_isp", DIV_TOP0, 0, 3),
DIV(0, "dout_aclk400_mscl", "mout_aclk400_mscl", DIV_TOP0, 4, 3),
DIV(0, "dout_aclk200", "mout_aclk200", DIV_TOP0, 8, 3),
DIV(0, "dout_aclk200_fsys2", "mout_aclk200_fsys2", DIV_TOP0, 12, 3),
+ DIV(0, "dout_aclk100_noc", "mout_aclk100_noc", DIV_TOP0, 20, 3),
DIV(0, "dout_pclk200_fsys", "mout_pclk200_fsys", DIV_TOP0, 24, 3),
DIV(0, "dout_aclk200_fsys", "mout_aclk200_fsys", DIV_TOP0, 28, 3),
DIV(0, "dout_aclk333_432_gscl", "mout_aclk333_432_gscl",
DIV_TOP1, 0, 3),
+ DIV(0, "dout_aclk333_432_isp", "mout_aclk333_432_isp",
+ DIV_TOP1, 4, 3),
DIV(0, "dout_aclk66", "mout_aclk66", DIV_TOP1, 8, 6),
+ DIV(0, "dout_aclk333_432_isp0", "mout_aclk333_432_isp0",
+ DIV_TOP1, 16, 3),
DIV(0, "dout_aclk266", "mout_aclk266", DIV_TOP1, 20, 3),
DIV(0, "dout_aclk166", "mout_aclk166", DIV_TOP1, 24, 3),
DIV(0, "dout_aclk333", "mout_aclk333", DIV_TOP1, 28, 3),
@@ -458,15 +773,16 @@ static struct samsung_div_clock exynos5420_div_clks[] __initdata = {
DIV(0, "dout_aclk266_g2d", "mout_aclk266_g2d", DIV_TOP2, 12, 3),
DIV(0, "dout_aclk_g3d", "mout_aclk_g3d", DIV_TOP2, 16, 3),
DIV(0, "dout_aclk300_jpeg", "mout_aclk300_jpeg", DIV_TOP2, 20, 3),
- DIV_A(0, "dout_aclk300_disp1", "mout_aclk300_disp1",
- DIV_TOP2, 24, 3, "aclk300_disp1"),
+ DIV(0, "dout_aclk300_disp1", "mout_aclk300_disp1", DIV_TOP2, 24, 3),
DIV(0, "dout_aclk300_gscl", "mout_aclk300_gscl", DIV_TOP2, 28, 3),
/* DISP1 Block */
- DIV(0, "dout_fimd1", "mout_fimd1", DIV_DISP10, 0, 4),
+ DIV(0, "dout_fimd1", "mout_fimd1_final", DIV_DISP10, 0, 4),
DIV(0, "dout_mipi1", "mout_mipi1", DIV_DISP10, 16, 8),
DIV(0, "dout_dp1", "mout_dp1", DIV_DISP10, 24, 4),
DIV(CLK_DOUT_PIXEL, "dout_hdmi_pixel", "mout_pixel", DIV_DISP10, 28, 4),
+ DIV(0, "dout_disp1_blk", "aclk200_disp1", DIV2_RATIO0, 16, 2),
+ DIV(0, "dout_aclk400_disp1", "mout_aclk400_disp1", DIV_TOP2, 4, 3),
/* Audio Block */
DIV(0, "dout_maudio0", "mout_maudio0", DIV_MAU, 20, 4),
@@ -484,6 +800,7 @@ static struct samsung_div_clock exynos5420_div_clks[] __initdata = {
DIV(0, "dout_mmc2", "mout_mmc2", DIV_FSYS1, 20, 10),
DIV(0, "dout_unipro", "mout_unipro", DIV_FSYS2, 24, 8),
+ DIV(0, "dout_mphy_refclk", "mout_mphy_refclk", DIV_FSYS2, 16, 8),
/* UART and PWM */
DIV(0, "dout_uart0", "mout_uart0", DIV_PERIC0, 8, 4),
@@ -497,6 +814,9 @@ static struct samsung_div_clock exynos5420_div_clks[] __initdata = {
DIV(0, "dout_spi1", "mout_spi1", DIV_PERIC1, 24, 4),
DIV(0, "dout_spi2", "mout_spi2", DIV_PERIC1, 28, 4),
+ /* Mfc Block */
+ DIV(0, "dout_mfc_blk", "mout_user_aclk333", DIV4_RATIO, 0, 2),
+
/* PCM */
DIV(0, "dout_pcm1", "dout_audio1", DIV_PERIC2, 16, 8),
DIV(0, "dout_pcm2", "dout_audio2", DIV_PERIC2, 24, 8),
@@ -509,15 +829,43 @@ static struct samsung_div_clock exynos5420_div_clks[] __initdata = {
DIV(0, "dout_audio2", "mout_audio2", DIV_PERIC3, 28, 4),
/* SPI Pre-Ratio */
- DIV(0, "dout_pre_spi0", "dout_spi0", DIV_PERIC4, 8, 8),
- DIV(0, "dout_pre_spi1", "dout_spi1", DIV_PERIC4, 16, 8),
- DIV(0, "dout_pre_spi2", "dout_spi2", DIV_PERIC4, 24, 8),
+ DIV(0, "dout_spi0_pre", "dout_spi0", DIV_PERIC4, 8, 8),
+ DIV(0, "dout_spi1_pre", "dout_spi1", DIV_PERIC4, 16, 8),
+ DIV(0, "dout_spi2_pre", "dout_spi2", DIV_PERIC4, 24, 8),
+
+ /* GSCL Block */
+ DIV(0, "dout_gscl_blk_300", "mout_user_aclk300_gscl",
+ DIV2_RATIO0, 4, 2),
+ DIV(0, "dout_gscl_blk_333", "aclk333_432_gscl", DIV2_RATIO0, 6, 2),
+
+ /* MSCL Block */
+ DIV(0, "dout_mscl_blk", "aclk400_mscl", DIV2_RATIO0, 28, 2),
+
+ /* PSGEN */
+ DIV(0, "dout_gen_blk", "mout_user_aclk266", DIV2_RATIO0, 8, 1),
+ DIV(0, "dout_jpg_blk", "aclk166", DIV2_RATIO0, 20, 1),
+
+ /* ISP Block */
+ DIV(0, "dout_isp_sensor0", "mout_isp_sensor", SCLK_DIV_ISP0, 8, 8),
+ DIV(0, "dout_isp_sensor1", "mout_isp_sensor", SCLK_DIV_ISP0, 16, 8),
+ DIV(0, "dout_isp_sensor2", "mout_isp_sensor", SCLK_DIV_ISP0, 24, 8),
+ DIV(0, "dout_pwm_isp", "mout_pwm_isp", SCLK_DIV_ISP1, 28, 4),
+ DIV(0, "dout_uart_isp", "mout_uart_isp", SCLK_DIV_ISP1, 24, 4),
+ DIV(0, "dout_spi0_isp", "mout_spi0_isp", SCLK_DIV_ISP1, 16, 4),
+ DIV(0, "dout_spi1_isp", "mout_spi1_isp", SCLK_DIV_ISP1, 20, 4),
+ DIV_F(0, "dout_spi0_isp_pre", "dout_spi0_isp", SCLK_DIV_ISP1, 0, 8,
+ CLK_SET_RATE_PARENT, 0),
+ DIV_F(0, "dout_spi1_isp_pre", "dout_spi1_isp", SCLK_DIV_ISP1, 8, 8,
+ CLK_SET_RATE_PARENT, 0),
};
-static struct samsung_gate_clock exynos5420_gate_clks[] __initdata = {
- /* TODO: Re-verify the CG bits for all the gate clocks */
- GATE_A(CLK_MCT, "pclk_st", "aclk66_psgen", GATE_BUS_PERIS1, 2, 0, 0,
- "mct"),
+static struct samsung_gate_clock exynos5x_gate_clks[] __initdata = {
+ /* G2D */
+ GATE(CLK_MDMA0, "mdma0", "aclk266_g2d", GATE_IP_G2D, 1, 0, 0),
+ GATE(CLK_SSS, "sss", "aclk266_g2d", GATE_IP_G2D, 2, 0, 0),
+ GATE(CLK_G2D, "g2d", "aclk333_g2d", GATE_IP_G2D, 3, 0, 0),
+ GATE(CLK_SMMU_MDMA0, "smmu_mdma0", "aclk266_g2d", GATE_IP_G2D, 5, 0, 0),
+ GATE(CLK_SMMU_G2D, "smmu_g2d", "aclk333_g2d", GATE_IP_G2D, 7, 0, 0),
GATE(0, "aclk200_fsys", "mout_user_aclk200_fsys",
GATE_BUS_FSYS0, 9, CLK_IGNORE_UNUSED, 0),
@@ -530,20 +878,42 @@ static struct samsung_gate_clock exynos5420_gate_clks[] __initdata = {
GATE_BUS_TOP, 1, CLK_IGNORE_UNUSED, 0),
GATE(0, "aclk300_jpeg", "mout_user_aclk300_jpeg",
GATE_BUS_TOP, 4, CLK_IGNORE_UNUSED, 0),
+ GATE(0, "aclk333_432_isp0", "mout_user_aclk333_432_isp0",
+ GATE_BUS_TOP, 5, 0, 0),
GATE(0, "aclk300_gscl", "mout_user_aclk300_gscl",
GATE_BUS_TOP, 6, CLK_IGNORE_UNUSED, 0),
GATE(0, "aclk333_432_gscl", "mout_user_aclk333_432_gscl",
GATE_BUS_TOP, 7, CLK_IGNORE_UNUSED, 0),
- GATE(0, "pclk66_gpio", "mout_sw_aclk66",
+ GATE(0, "aclk333_432_isp", "mout_user_aclk333_432_isp",
+ GATE_BUS_TOP, 8, 0, 0),
+ GATE(CLK_PCLK66_GPIO, "pclk66_gpio", "mout_user_pclk66_gpio",
GATE_BUS_TOP, 9, CLK_IGNORE_UNUSED, 0),
- GATE(0, "aclk66_psgen", "mout_aclk66_psgen",
+ GATE(0, "aclk66_psgen", "mout_user_aclk66_psgen",
GATE_BUS_TOP, 10, CLK_IGNORE_UNUSED, 0),
- GATE(0, "aclk66_peric", "mout_aclk66_peric",
- GATE_BUS_TOP, 11, 0, 0),
+ GATE(CLK_ACLK66_PERIC, "aclk66_peric", "mout_user_aclk66_peric",
+ GATE_BUS_TOP, 11, CLK_IGNORE_UNUSED, 0),
+ GATE(0, "aclk266_isp", "mout_user_aclk266_isp",
+ GATE_BUS_TOP, 13, 0, 0),
GATE(0, "aclk166", "mout_user_aclk166",
GATE_BUS_TOP, 14, CLK_IGNORE_UNUSED, 0),
GATE(0, "aclk333", "mout_aclk333",
GATE_BUS_TOP, 15, CLK_IGNORE_UNUSED, 0),
+ GATE(0, "aclk400_isp", "mout_user_aclk400_isp",
+ GATE_BUS_TOP, 16, 0, 0),
+ GATE(0, "aclk400_mscl", "mout_user_aclk400_mscl",
+ GATE_BUS_TOP, 17, 0, 0),
+ GATE(0, "aclk200_disp1", "mout_user_aclk200_disp1",
+ GATE_BUS_TOP, 18, 0, 0),
+ GATE(CLK_SCLK_MPHY_IXTAL24, "sclk_mphy_ixtal24", "mphy_refclk_ixtal24",
+ GATE_BUS_TOP, 28, 0, 0),
+ GATE(CLK_SCLK_HSIC_12M, "sclk_hsic_12m", "ff_hsic_12m",
+ GATE_BUS_TOP, 29, 0, 0),
+
+ GATE(0, "aclk300_disp1", "mout_user_aclk300_disp1",
+ SRC_MASK_TOP2, 24, 0, 0),
+
+ GATE(CLK_MAU_EPLL, "mau_epll", "mout_mau_epll_clk",
+ SRC_MASK_TOP7, 20, 0, 0),
/* sclk */
GATE(CLK_SCLK_UART0, "sclk_uart0", "dout_uart0",
@@ -554,11 +924,11 @@ static struct samsung_gate_clock exynos5420_gate_clks[] __initdata = {
GATE_TOP_SCLK_PERIC, 2, CLK_SET_RATE_PARENT, 0),
GATE(CLK_SCLK_UART3, "sclk_uart3", "dout_uart3",
GATE_TOP_SCLK_PERIC, 3, CLK_SET_RATE_PARENT, 0),
- GATE(CLK_SCLK_SPI0, "sclk_spi0", "dout_pre_spi0",
+ GATE(CLK_SCLK_SPI0, "sclk_spi0", "dout_spi0_pre",
GATE_TOP_SCLK_PERIC, 6, CLK_SET_RATE_PARENT, 0),
- GATE(CLK_SCLK_SPI1, "sclk_spi1", "dout_pre_spi1",
+ GATE(CLK_SCLK_SPI1, "sclk_spi1", "dout_spi1_pre",
GATE_TOP_SCLK_PERIC, 7, CLK_SET_RATE_PARENT, 0),
- GATE(CLK_SCLK_SPI2, "sclk_spi2", "dout_pre_spi2",
+ GATE(CLK_SCLK_SPI2, "sclk_spi2", "dout_spi2_pre",
GATE_TOP_SCLK_PERIC, 8, CLK_SET_RATE_PARENT, 0),
GATE(CLK_SCLK_SPDIF, "sclk_spdif", "mout_spdif",
GATE_TOP_SCLK_PERIC, 9, CLK_SET_RATE_PARENT, 0),
@@ -588,164 +958,191 @@ static struct samsung_gate_clock exynos5420_gate_clks[] __initdata = {
GATE(CLK_SCLK_USBD301, "sclk_usbd301", "dout_usbd301",
GATE_TOP_SCLK_FSYS, 10, CLK_SET_RATE_PARENT, 0),
- GATE(CLK_SCLK_USBD301, "sclk_unipro", "dout_unipro",
- SRC_MASK_FSYS, 24, CLK_SET_RATE_PARENT, 0),
-
- GATE(CLK_SCLK_GSCL_WA, "sclk_gscl_wa", "aclK333_432_gscl",
- GATE_TOP_SCLK_GSCL, 6, CLK_SET_RATE_PARENT, 0),
- GATE(CLK_SCLK_GSCL_WB, "sclk_gscl_wb", "aclk333_432_gscl",
- GATE_TOP_SCLK_GSCL, 7, CLK_SET_RATE_PARENT, 0),
-
/* Display */
GATE(CLK_SCLK_FIMD1, "sclk_fimd1", "dout_fimd1",
- GATE_TOP_SCLK_DISP1, 0, CLK_SET_RATE_PARENT, 0),
+ GATE_TOP_SCLK_DISP1, 0, CLK_SET_RATE_PARENT, 0),
GATE(CLK_SCLK_MIPI1, "sclk_mipi1", "dout_mipi1",
- GATE_TOP_SCLK_DISP1, 3, CLK_SET_RATE_PARENT, 0),
+ GATE_TOP_SCLK_DISP1, 3, CLK_SET_RATE_PARENT, 0),
GATE(CLK_SCLK_HDMI, "sclk_hdmi", "mout_hdmi",
- GATE_TOP_SCLK_DISP1, 9, CLK_SET_RATE_PARENT, 0),
+ GATE_TOP_SCLK_DISP1, 9, 0, 0),
GATE(CLK_SCLK_PIXEL, "sclk_pixel", "dout_hdmi_pixel",
- GATE_TOP_SCLK_DISP1, 10, CLK_SET_RATE_PARENT, 0),
+ GATE_TOP_SCLK_DISP1, 10, CLK_SET_RATE_PARENT, 0),
GATE(CLK_SCLK_DP1, "sclk_dp1", "dout_dp1",
- GATE_TOP_SCLK_DISP1, 20, CLK_SET_RATE_PARENT, 0),
+ GATE_TOP_SCLK_DISP1, 20, CLK_SET_RATE_PARENT, 0),
/* Maudio Block */
GATE(CLK_SCLK_MAUDIO0, "sclk_maudio0", "dout_maudio0",
GATE_TOP_SCLK_MAU, 0, CLK_SET_RATE_PARENT, 0),
GATE(CLK_SCLK_MAUPCM0, "sclk_maupcm0", "dout_maupcm0",
GATE_TOP_SCLK_MAU, 1, CLK_SET_RATE_PARENT, 0),
- /* FSYS */
+
+ /* FSYS Block */
GATE(CLK_TSI, "tsi", "aclk200_fsys", GATE_BUS_FSYS0, 0, 0, 0),
GATE(CLK_PDMA0, "pdma0", "aclk200_fsys", GATE_BUS_FSYS0, 1, 0, 0),
GATE(CLK_PDMA1, "pdma1", "aclk200_fsys", GATE_BUS_FSYS0, 2, 0, 0),
GATE(CLK_UFS, "ufs", "aclk200_fsys2", GATE_BUS_FSYS0, 3, 0, 0),
- GATE(CLK_RTIC, "rtic", "aclk200_fsys", GATE_BUS_FSYS0, 5, 0, 0),
- GATE(CLK_MMC0, "mmc0", "aclk200_fsys2", GATE_BUS_FSYS0, 12, 0, 0),
- GATE(CLK_MMC1, "mmc1", "aclk200_fsys2", GATE_BUS_FSYS0, 13, 0, 0),
- GATE(CLK_MMC2, "mmc2", "aclk200_fsys2", GATE_BUS_FSYS0, 14, 0, 0),
+ GATE(CLK_RTIC, "rtic", "aclk200_fsys", GATE_IP_FSYS, 9, 0, 0),
+ GATE(CLK_MMC0, "mmc0", "aclk200_fsys2", GATE_IP_FSYS, 12, 0, 0),
+ GATE(CLK_MMC1, "mmc1", "aclk200_fsys2", GATE_IP_FSYS, 13, 0, 0),
+ GATE(CLK_MMC2, "mmc2", "aclk200_fsys2", GATE_IP_FSYS, 14, 0, 0),
GATE(CLK_SROMC, "sromc", "aclk200_fsys2",
- GATE_BUS_FSYS0, 19, CLK_IGNORE_UNUSED, 0),
- GATE(CLK_USBH20, "usbh20", "aclk200_fsys", GATE_BUS_FSYS0, 20, 0, 0),
- GATE(CLK_USBD300, "usbd300", "aclk200_fsys", GATE_BUS_FSYS0, 21, 0, 0),
- GATE(CLK_USBD301, "usbd301", "aclk200_fsys", GATE_BUS_FSYS0, 28, 0, 0),
-
- /* UART */
- GATE(CLK_UART0, "uart0", "aclk66_peric", GATE_BUS_PERIC, 4, 0, 0),
- GATE(CLK_UART1, "uart1", "aclk66_peric", GATE_BUS_PERIC, 5, 0, 0),
- GATE_A(CLK_UART2, "uart2", "aclk66_peric",
- GATE_BUS_PERIC, 6, CLK_IGNORE_UNUSED, 0, "uart2"),
- GATE(CLK_UART3, "uart3", "aclk66_peric", GATE_BUS_PERIC, 7, 0, 0),
- /* I2C */
- GATE(CLK_I2C0, "i2c0", "aclk66_peric", GATE_BUS_PERIC, 9, 0, 0),
- GATE(CLK_I2C1, "i2c1", "aclk66_peric", GATE_BUS_PERIC, 10, 0, 0),
- GATE(CLK_I2C2, "i2c2", "aclk66_peric", GATE_BUS_PERIC, 11, 0, 0),
- GATE(CLK_I2C3, "i2c3", "aclk66_peric", GATE_BUS_PERIC, 12, 0, 0),
- GATE(CLK_I2C4, "i2c4", "aclk66_peric", GATE_BUS_PERIC, 13, 0, 0),
- GATE(CLK_I2C5, "i2c5", "aclk66_peric", GATE_BUS_PERIC, 14, 0, 0),
- GATE(CLK_I2C6, "i2c6", "aclk66_peric", GATE_BUS_PERIC, 15, 0, 0),
- GATE(CLK_I2C7, "i2c7", "aclk66_peric", GATE_BUS_PERIC, 16, 0, 0),
- GATE(CLK_I2C_HDMI, "i2c_hdmi", "aclk66_peric", GATE_BUS_PERIC, 17, 0,
- 0),
- GATE(CLK_TSADC, "tsadc", "aclk66_peric", GATE_BUS_PERIC, 18, 0, 0),
- /* SPI */
- GATE(CLK_SPI0, "spi0", "aclk66_peric", GATE_BUS_PERIC, 19, 0, 0),
- GATE(CLK_SPI1, "spi1", "aclk66_peric", GATE_BUS_PERIC, 20, 0, 0),
- GATE(CLK_SPI2, "spi2", "aclk66_peric", GATE_BUS_PERIC, 21, 0, 0),
- GATE(CLK_KEYIF, "keyif", "aclk66_peric", GATE_BUS_PERIC, 22, 0, 0),
- /* I2S */
- GATE(CLK_I2S1, "i2s1", "aclk66_peric", GATE_BUS_PERIC, 23, 0, 0),
- GATE(CLK_I2S2, "i2s2", "aclk66_peric", GATE_BUS_PERIC, 24, 0, 0),
- /* PCM */
- GATE(CLK_PCM1, "pcm1", "aclk66_peric", GATE_BUS_PERIC, 25, 0, 0),
- GATE(CLK_PCM2, "pcm2", "aclk66_peric", GATE_BUS_PERIC, 26, 0, 0),
- /* PWM */
- GATE(CLK_PWM, "pwm", "aclk66_peric", GATE_BUS_PERIC, 27, 0, 0),
- /* SPDIF */
- GATE(CLK_SPDIF, "spdif", "aclk66_peric", GATE_BUS_PERIC, 29, 0, 0),
+ GATE_IP_FSYS, 17, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_USBH20, "usbh20", "aclk200_fsys", GATE_IP_FSYS, 18, 0, 0),
+ GATE(CLK_USBD300, "usbd300", "aclk200_fsys", GATE_IP_FSYS, 19, 0, 0),
+ GATE(CLK_USBD301, "usbd301", "aclk200_fsys", GATE_IP_FSYS, 20, 0, 0),
+ GATE(CLK_SCLK_UNIPRO, "sclk_unipro", "dout_unipro",
+ SRC_MASK_FSYS, 24, CLK_SET_RATE_PARENT, 0),
- GATE(CLK_I2C8, "i2c8", "aclk66_peric", GATE_BUS_PERIC1, 0, 0, 0),
- GATE(CLK_I2C9, "i2c9", "aclk66_peric", GATE_BUS_PERIC1, 1, 0, 0),
- GATE(CLK_I2C10, "i2c10", "aclk66_peric", GATE_BUS_PERIC1, 2, 0, 0),
+ /* PERIC Block */
+ GATE(CLK_UART0, "uart0", "aclk66_peric", GATE_IP_PERIC, 0, 0, 0),
+ GATE(CLK_UART1, "uart1", "aclk66_peric", GATE_IP_PERIC, 1, 0, 0),
+ GATE(CLK_UART2, "uart2", "aclk66_peric", GATE_IP_PERIC, 2, 0, 0),
+ GATE(CLK_UART3, "uart3", "aclk66_peric", GATE_IP_PERIC, 3, 0, 0),
+ GATE(CLK_I2C0, "i2c0", "aclk66_peric", GATE_IP_PERIC, 6, 0, 0),
+ GATE(CLK_I2C1, "i2c1", "aclk66_peric", GATE_IP_PERIC, 7, 0, 0),
+ GATE(CLK_I2C2, "i2c2", "aclk66_peric", GATE_IP_PERIC, 8, 0, 0),
+ GATE(CLK_I2C3, "i2c3", "aclk66_peric", GATE_IP_PERIC, 9, 0, 0),
+ GATE(CLK_USI0, "usi0", "aclk66_peric", GATE_IP_PERIC, 10, 0, 0),
+ GATE(CLK_USI1, "usi1", "aclk66_peric", GATE_IP_PERIC, 11, 0, 0),
+ GATE(CLK_USI2, "usi2", "aclk66_peric", GATE_IP_PERIC, 12, 0, 0),
+ GATE(CLK_USI3, "usi3", "aclk66_peric", GATE_IP_PERIC, 13, 0, 0),
+ GATE(CLK_I2C_HDMI, "i2c_hdmi", "aclk66_peric", GATE_IP_PERIC, 14, 0, 0),
+ GATE(CLK_TSADC, "tsadc", "aclk66_peric", GATE_IP_PERIC, 15, 0, 0),
+ GATE(CLK_SPI0, "spi0", "aclk66_peric", GATE_IP_PERIC, 16, 0, 0),
+ GATE(CLK_SPI1, "spi1", "aclk66_peric", GATE_IP_PERIC, 17, 0, 0),
+ GATE(CLK_SPI2, "spi2", "aclk66_peric", GATE_IP_PERIC, 18, 0, 0),
+ GATE(CLK_I2S1, "i2s1", "aclk66_peric", GATE_IP_PERIC, 20, 0, 0),
+ GATE(CLK_I2S2, "i2s2", "aclk66_peric", GATE_IP_PERIC, 21, 0, 0),
+ GATE(CLK_PCM1, "pcm1", "aclk66_peric", GATE_IP_PERIC, 22, 0, 0),
+ GATE(CLK_PCM2, "pcm2", "aclk66_peric", GATE_IP_PERIC, 23, 0, 0),
+ GATE(CLK_PWM, "pwm", "aclk66_peric", GATE_IP_PERIC, 24, 0, 0),
+ GATE(CLK_SPDIF, "spdif", "aclk66_peric", GATE_IP_PERIC, 26, 0, 0),
+ GATE(CLK_USI4, "usi4", "aclk66_peric", GATE_IP_PERIC, 28, 0, 0),
+ GATE(CLK_USI5, "usi5", "aclk66_peric", GATE_IP_PERIC, 30, 0, 0),
+ GATE(CLK_USI6, "usi6", "aclk66_peric", GATE_IP_PERIC, 31, 0, 0),
+ GATE(CLK_KEYIF, "keyif", "aclk66_peric", GATE_BUS_PERIC, 22, 0, 0),
+
+ /* PERIS Block */
GATE(CLK_CHIPID, "chipid", "aclk66_psgen",
- GATE_BUS_PERIS0, 12, CLK_IGNORE_UNUSED, 0),
+ GATE_IP_PERIS, 0, CLK_IGNORE_UNUSED, 0),
GATE(CLK_SYSREG, "sysreg", "aclk66_psgen",
- GATE_BUS_PERIS0, 13, CLK_IGNORE_UNUSED, 0),
- GATE(CLK_TZPC0, "tzpc0", "aclk66_psgen", GATE_BUS_PERIS0, 18, 0, 0),
- GATE(CLK_TZPC1, "tzpc1", "aclk66_psgen", GATE_BUS_PERIS0, 19, 0, 0),
- GATE(CLK_TZPC2, "tzpc2", "aclk66_psgen", GATE_BUS_PERIS0, 20, 0, 0),
- GATE(CLK_TZPC3, "tzpc3", "aclk66_psgen", GATE_BUS_PERIS0, 21, 0, 0),
- GATE(CLK_TZPC4, "tzpc4", "aclk66_psgen", GATE_BUS_PERIS0, 22, 0, 0),
- GATE(CLK_TZPC5, "tzpc5", "aclk66_psgen", GATE_BUS_PERIS0, 23, 0, 0),
- GATE(CLK_TZPC6, "tzpc6", "aclk66_psgen", GATE_BUS_PERIS0, 24, 0, 0),
- GATE(CLK_TZPC7, "tzpc7", "aclk66_psgen", GATE_BUS_PERIS0, 25, 0, 0),
- GATE(CLK_TZPC8, "tzpc8", "aclk66_psgen", GATE_BUS_PERIS0, 26, 0, 0),
- GATE(CLK_TZPC9, "tzpc9", "aclk66_psgen", GATE_BUS_PERIS0, 27, 0, 0),
-
- GATE(CLK_HDMI_CEC, "hdmi_cec", "aclk66_psgen", GATE_BUS_PERIS1, 0, 0,
- 0),
+ GATE_IP_PERIS, 1, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_TZPC0, "tzpc0", "aclk66_psgen", GATE_IP_PERIS, 6, 0, 0),
+ GATE(CLK_TZPC1, "tzpc1", "aclk66_psgen", GATE_IP_PERIS, 7, 0, 0),
+ GATE(CLK_TZPC2, "tzpc2", "aclk66_psgen", GATE_IP_PERIS, 8, 0, 0),
+ GATE(CLK_TZPC3, "tzpc3", "aclk66_psgen", GATE_IP_PERIS, 9, 0, 0),
+ GATE(CLK_TZPC4, "tzpc4", "aclk66_psgen", GATE_IP_PERIS, 10, 0, 0),
+ GATE(CLK_TZPC5, "tzpc5", "aclk66_psgen", GATE_IP_PERIS, 11, 0, 0),
+ GATE(CLK_TZPC6, "tzpc6", "aclk66_psgen", GATE_IP_PERIS, 12, 0, 0),
+ GATE(CLK_TZPC7, "tzpc7", "aclk66_psgen", GATE_IP_PERIS, 13, 0, 0),
+ GATE(CLK_TZPC8, "tzpc8", "aclk66_psgen", GATE_IP_PERIS, 14, 0, 0),
+ GATE(CLK_TZPC9, "tzpc9", "aclk66_psgen", GATE_IP_PERIS, 15, 0, 0),
+ GATE(CLK_HDMI_CEC, "hdmi_cec", "aclk66_psgen", GATE_IP_PERIS, 16, 0, 0),
+ GATE(CLK_MCT, "mct", "aclk66_psgen", GATE_IP_PERIS, 18, 0, 0),
+ GATE(CLK_WDT, "wdt", "aclk66_psgen", GATE_IP_PERIS, 19, 0, 0),
+ GATE(CLK_RTC, "rtc", "aclk66_psgen", GATE_IP_PERIS, 20, 0, 0),
+ GATE(CLK_TMU, "tmu", "aclk66_psgen", GATE_IP_PERIS, 21, 0, 0),
+ GATE(CLK_TMU_GPU, "tmu_gpu", "aclk66_psgen", GATE_IP_PERIS, 22, 0, 0),
+
GATE(CLK_SECKEY, "seckey", "aclk66_psgen", GATE_BUS_PERIS1, 1, 0, 0),
- GATE(CLK_WDT, "wdt", "aclk66_psgen", GATE_BUS_PERIS1, 3, 0, 0),
- GATE(CLK_RTC, "rtc", "aclk66_psgen", GATE_BUS_PERIS1, 4, 0, 0),
- GATE(CLK_TMU, "tmu", "aclk66_psgen", GATE_BUS_PERIS1, 5, 0, 0),
- GATE(CLK_TMU_GPU, "tmu_gpu", "aclk66_psgen", GATE_BUS_PERIS1, 6, 0, 0),
+
+ /* GEN Block */
+ GATE(CLK_ROTATOR, "rotator", "mout_user_aclk266", GATE_IP_GEN, 1, 0, 0),
+ GATE(CLK_JPEG, "jpeg", "aclk300_jpeg", GATE_IP_GEN, 2, 0, 0),
+ GATE(CLK_JPEG2, "jpeg2", "aclk300_jpeg", GATE_IP_GEN, 3, 0, 0),
+ GATE(CLK_MDMA1, "mdma1", "mout_user_aclk266", GATE_IP_GEN, 4, 0, 0),
+ GATE(CLK_TOP_RTC, "top_rtc", "aclk66_psgen", GATE_IP_GEN, 5, 0, 0),
+ GATE(CLK_SMMU_ROTATOR, "smmu_rotator", "dout_gen_blk",
+ GATE_IP_GEN, 6, 0, 0),
+ GATE(CLK_SMMU_JPEG, "smmu_jpeg", "dout_jpg_blk", GATE_IP_GEN, 7, 0, 0),
+ GATE(CLK_SMMU_MDMA1, "smmu_mdma1", "dout_gen_blk",
+ GATE_IP_GEN, 9, 0, 0),
+
+ /* GATE_IP_GEN doesn't list gates for smmu_jpeg2 and mc */
+ GATE(CLK_SMMU_JPEG2, "smmu_jpeg2", "dout_jpg_blk",
+ GATE_BUS_GEN, 28, 0, 0),
+ GATE(CLK_MC, "mc", "aclk66_psgen", GATE_BUS_GEN, 12, 0, 0),
+
+ /* GSCL Block */
+ GATE(CLK_SCLK_GSCL_WA, "sclk_gscl_wa", "mout_user_aclk333_432_gscl",
+ GATE_TOP_SCLK_GSCL, 6, 0, 0),
+ GATE(CLK_SCLK_GSCL_WB, "sclk_gscl_wb", "mout_user_aclk333_432_gscl",
+ GATE_TOP_SCLK_GSCL, 7, 0, 0),
GATE(CLK_GSCL0, "gscl0", "aclk300_gscl", GATE_IP_GSCL0, 0, 0, 0),
GATE(CLK_GSCL1, "gscl1", "aclk300_gscl", GATE_IP_GSCL0, 1, 0, 0),
- GATE(CLK_CLK_3AA, "clk_3aa", "aclk300_gscl", GATE_IP_GSCL0, 4, 0, 0),
-
- GATE(CLK_SMMU_3AA, "smmu_3aa", "aclk333_432_gscl", GATE_IP_GSCL1, 2, 0,
- 0),
- GATE(CLK_SMMU_FIMCL0, "smmu_fimcl0", "aclk333_432_gscl",
+ GATE(CLK_FIMC_3AA, "fimc_3aa", "aclk333_432_gscl",
+ GATE_IP_GSCL0, 4, 0, 0),
+ GATE(CLK_FIMC_LITE0, "fimc_lite0", "aclk333_432_gscl",
+ GATE_IP_GSCL0, 5, 0, 0),
+ GATE(CLK_FIMC_LITE1, "fimc_lite1", "aclk333_432_gscl",
+ GATE_IP_GSCL0, 6, 0, 0),
+
+ GATE(CLK_SMMU_3AA, "smmu_3aa", "dout_gscl_blk_333",
+ GATE_IP_GSCL1, 2, 0, 0),
+ GATE(CLK_SMMU_FIMCL0, "smmu_fimcl0", "dout_gscl_blk_333",
GATE_IP_GSCL1, 3, 0, 0),
- GATE(CLK_SMMU_FIMCL1, "smmu_fimcl1", "aclk333_432_gscl",
+ GATE(CLK_SMMU_FIMCL1, "smmu_fimcl1", "dout_gscl_blk_333",
GATE_IP_GSCL1, 4, 0, 0),
- GATE(CLK_SMMU_GSCL0, "smmu_gscl0", "aclk300_gscl", GATE_IP_GSCL1, 6, 0,
- 0),
- GATE(CLK_SMMU_GSCL1, "smmu_gscl1", "aclk300_gscl", GATE_IP_GSCL1, 7, 0,
- 0),
- GATE(CLK_GSCL_WA, "gscl_wa", "aclk300_gscl", GATE_IP_GSCL1, 12, 0, 0),
- GATE(CLK_GSCL_WB, "gscl_wb", "aclk300_gscl", GATE_IP_GSCL1, 13, 0, 0),
- GATE(CLK_SMMU_FIMCL3, "smmu_fimcl3,", "aclk333_432_gscl",
+ GATE(CLK_SMMU_GSCL0, "smmu_gscl0", "dout_gscl_blk_300",
+ GATE_IP_GSCL1, 6, 0, 0),
+ GATE(CLK_SMMU_GSCL1, "smmu_gscl1", "dout_gscl_blk_300",
+ GATE_IP_GSCL1, 7, 0, 0),
+ GATE(CLK_GSCL_WA, "gscl_wa", "sclk_gscl_wa", GATE_IP_GSCL1, 12, 0, 0),
+ GATE(CLK_GSCL_WB, "gscl_wb", "sclk_gscl_wb", GATE_IP_GSCL1, 13, 0, 0),
+ GATE(CLK_SMMU_FIMCL3, "smmu_fimcl3,", "dout_gscl_blk_333",
GATE_IP_GSCL1, 16, 0, 0),
GATE(CLK_FIMC_LITE3, "fimc_lite3", "aclk333_432_gscl",
GATE_IP_GSCL1, 17, 0, 0),
+ /* MSCL Block */
+ GATE(CLK_MSCL0, "mscl0", "aclk400_mscl", GATE_IP_MSCL, 0, 0, 0),
+ GATE(CLK_MSCL1, "mscl1", "aclk400_mscl", GATE_IP_MSCL, 1, 0, 0),
+ GATE(CLK_MSCL2, "mscl2", "aclk400_mscl", GATE_IP_MSCL, 2, 0, 0),
+ GATE(CLK_SMMU_MSCL0, "smmu_mscl0", "dout_mscl_blk",
+ GATE_IP_MSCL, 8, 0, 0),
+ GATE(CLK_SMMU_MSCL1, "smmu_mscl1", "dout_mscl_blk",
+ GATE_IP_MSCL, 9, 0, 0),
+ GATE(CLK_SMMU_MSCL2, "smmu_mscl2", "dout_mscl_blk",
+ GATE_IP_MSCL, 10, 0, 0),
+
GATE(CLK_FIMD1, "fimd1", "aclk300_disp1", GATE_IP_DISP1, 0, 0, 0),
GATE(CLK_DSIM1, "dsim1", "aclk200_disp1", GATE_IP_DISP1, 3, 0, 0),
GATE(CLK_DP1, "dp1", "aclk200_disp1", GATE_IP_DISP1, 4, 0, 0),
- GATE(CLK_MIXER, "mixer", "aclk166", GATE_IP_DISP1, 5, 0, 0),
+ GATE(CLK_MIXER, "mixer", "aclk200_disp1", GATE_IP_DISP1, 5, 0, 0),
GATE(CLK_HDMI, "hdmi", "aclk200_disp1", GATE_IP_DISP1, 6, 0, 0),
- GATE(CLK_SMMU_FIMD1, "smmu_fimd1", "aclk300_disp1", GATE_IP_DISP1, 8, 0,
- 0),
+ GATE(CLK_SMMU_FIMD1M0, "smmu_fimd1m0", "dout_disp1_blk",
+ GATE_IP_DISP1, 7, 0, 0),
+ GATE(CLK_SMMU_FIMD1M1, "smmu_fimd1m1", "dout_disp1_blk",
+ GATE_IP_DISP1, 8, 0, 0),
+ GATE(CLK_SMMU_MIXER, "smmu_mixer", "aclk200_disp1",
+ GATE_IP_DISP1, 9, 0, 0),
+
+ /* ISP */
+ GATE(CLK_SCLK_UART_ISP, "sclk_uart_isp", "dout_uart_isp",
+ GATE_TOP_SCLK_ISP, 0, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_SCLK_SPI0_ISP, "sclk_spi0_isp", "dout_spi0_isp_pre",
+ GATE_TOP_SCLK_ISP, 1, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_SCLK_SPI1_ISP, "sclk_spi1_isp", "dout_spi1_isp_pre",
+ GATE_TOP_SCLK_ISP, 2, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_SCLK_PWM_ISP, "sclk_pwm_isp", "dout_pwm_isp",
+ GATE_TOP_SCLK_ISP, 3, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_SCLK_ISP_SENSOR0, "sclk_isp_sensor0", "dout_isp_sensor0",
+ GATE_TOP_SCLK_ISP, 4, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_SCLK_ISP_SENSOR1, "sclk_isp_sensor1", "dout_isp_sensor1",
+ GATE_TOP_SCLK_ISP, 8, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_SCLK_ISP_SENSOR2, "sclk_isp_sensor2", "dout_isp_sensor2",
+ GATE_TOP_SCLK_ISP, 12, CLK_SET_RATE_PARENT, 0),
GATE(CLK_MFC, "mfc", "aclk333", GATE_IP_MFC, 0, 0, 0),
- GATE(CLK_SMMU_MFCL, "smmu_mfcl", "aclk333", GATE_IP_MFC, 1, 0, 0),
- GATE(CLK_SMMU_MFCR, "smmu_mfcr", "aclk333", GATE_IP_MFC, 2, 0, 0),
-
- GATE(CLK_G3D, "g3d", "aclkg3d", GATE_IP_G3D, 9, 0, 0),
+ GATE(CLK_SMMU_MFCL, "smmu_mfcl", "dout_mfc_blk", GATE_IP_MFC, 1, 0, 0),
+ GATE(CLK_SMMU_MFCR, "smmu_mfcr", "dout_mfc_blk", GATE_IP_MFC, 2, 0, 0),
- GATE(CLK_ROTATOR, "rotator", "aclk266", GATE_IP_GEN, 1, 0, 0),
- GATE(CLK_JPEG, "jpeg", "aclk300_jpeg", GATE_IP_GEN, 2, 0, 0),
- GATE(CLK_JPEG2, "jpeg2", "aclk300_jpeg", GATE_IP_GEN, 3, 0, 0),
- GATE(CLK_MDMA1, "mdma1", "aclk266", GATE_IP_GEN, 4, 0, 0),
- GATE(CLK_SMMU_ROTATOR, "smmu_rotator", "aclk266", GATE_IP_GEN, 6, 0, 0),
- GATE(CLK_SMMU_JPEG, "smmu_jpeg", "aclk300_jpeg", GATE_IP_GEN, 7, 0, 0),
- GATE(CLK_SMMU_MDMA1, "smmu_mdma1", "aclk266", GATE_IP_GEN, 9, 0, 0),
-
- GATE(CLK_MSCL0, "mscl0", "aclk400_mscl", GATE_IP_MSCL, 0, 0, 0),
- GATE(CLK_MSCL1, "mscl1", "aclk400_mscl", GATE_IP_MSCL, 1, 0, 0),
- GATE(CLK_MSCL2, "mscl2", "aclk400_mscl", GATE_IP_MSCL, 2, 0, 0),
- GATE(CLK_SMMU_MSCL0, "smmu_mscl0", "aclk400_mscl", GATE_IP_MSCL, 8, 0,
- 0),
- GATE(CLK_SMMU_MSCL1, "smmu_mscl1", "aclk400_mscl", GATE_IP_MSCL, 9, 0,
- 0),
- GATE(CLK_SMMU_MSCL2, "smmu_mscl2", "aclk400_mscl", GATE_IP_MSCL, 10, 0,
- 0),
- GATE(CLK_SMMU_MIXER, "smmu_mixer", "aclk200_disp1", GATE_IP_DISP1, 9, 0,
- 0),
+ GATE(CLK_G3D, "g3d", "mout_user_aclk_g3d", GATE_IP_G3D, 9, 0, 0),
};
-static struct samsung_pll_clock exynos5420_plls[nr_plls] __initdata = {
+static struct samsung_pll_clock exynos5x_plls[nr_plls] __initdata = {
[apll] = PLL(pll_2550, CLK_FOUT_APLL, "fout_apll", "fin_pll", APLL_LOCK,
APLL_CON0, NULL),
[cpll] = PLL(pll_2550, CLK_FOUT_CPLL, "fout_cpll", "fin_pll", CPLL_LOCK,
@@ -776,8 +1173,11 @@ static struct of_device_id ext_clk_match[] __initdata = {
};
/* register exynos5420 clocks */
-static void __init exynos5420_clk_init(struct device_node *np)
+static void __init exynos5x_clk_init(struct device_node *np,
+ enum exynos5x_soc soc)
{
+ struct samsung_clk_provider *ctx;
+
if (np) {
reg_base = of_iomap(np, 0);
if (!reg_base)
@@ -786,23 +1186,56 @@ static void __init exynos5420_clk_init(struct device_node *np)
panic("%s: unable to determine soc\n", __func__);
}
- samsung_clk_init(np, reg_base, CLK_NR_CLKS);
- samsung_clk_of_register_fixed_ext(exynos5420_fixed_rate_ext_clks,
- ARRAY_SIZE(exynos5420_fixed_rate_ext_clks),
+ exynos5x_soc = soc;
+
+ ctx = samsung_clk_init(np, reg_base, CLK_NR_CLKS);
+ if (!ctx)
+ panic("%s: unable to allocate context.\n", __func__);
+
+ samsung_clk_of_register_fixed_ext(ctx, exynos5x_fixed_rate_ext_clks,
+ ARRAY_SIZE(exynos5x_fixed_rate_ext_clks),
ext_clk_match);
- samsung_clk_register_pll(exynos5420_plls, ARRAY_SIZE(exynos5420_plls),
+ samsung_clk_register_pll(ctx, exynos5x_plls, ARRAY_SIZE(exynos5x_plls),
reg_base);
- samsung_clk_register_fixed_rate(exynos5420_fixed_rate_clks,
- ARRAY_SIZE(exynos5420_fixed_rate_clks));
- samsung_clk_register_fixed_factor(exynos5420_fixed_factor_clks,
- ARRAY_SIZE(exynos5420_fixed_factor_clks));
- samsung_clk_register_mux(exynos5420_mux_clks,
- ARRAY_SIZE(exynos5420_mux_clks));
- samsung_clk_register_div(exynos5420_div_clks,
- ARRAY_SIZE(exynos5420_div_clks));
- samsung_clk_register_gate(exynos5420_gate_clks,
- ARRAY_SIZE(exynos5420_gate_clks));
+ samsung_clk_register_fixed_rate(ctx, exynos5x_fixed_rate_clks,
+ ARRAY_SIZE(exynos5x_fixed_rate_clks));
+ samsung_clk_register_fixed_factor(ctx, exynos5x_fixed_factor_clks,
+ ARRAY_SIZE(exynos5x_fixed_factor_clks));
+ samsung_clk_register_mux(ctx, exynos5x_mux_clks,
+ ARRAY_SIZE(exynos5x_mux_clks));
+ samsung_clk_register_div(ctx, exynos5x_div_clks,
+ ARRAY_SIZE(exynos5x_div_clks));
+ samsung_clk_register_gate(ctx, exynos5x_gate_clks,
+ ARRAY_SIZE(exynos5x_gate_clks));
+
+ if (soc == EXYNOS5420) {
+ samsung_clk_register_mux(ctx, exynos5420_mux_clks,
+ ARRAY_SIZE(exynos5420_mux_clks));
+ samsung_clk_register_div(ctx, exynos5420_div_clks,
+ ARRAY_SIZE(exynos5420_div_clks));
+ } else {
+ samsung_clk_register_fixed_factor(
+ ctx, exynos5800_fixed_factor_clks,
+ ARRAY_SIZE(exynos5800_fixed_factor_clks));
+ samsung_clk_register_mux(ctx, exynos5800_mux_clks,
+ ARRAY_SIZE(exynos5800_mux_clks));
+ samsung_clk_register_div(ctx, exynos5800_div_clks,
+ ARRAY_SIZE(exynos5800_div_clks));
+ samsung_clk_register_gate(ctx, exynos5800_gate_clks,
+ ARRAY_SIZE(exynos5800_gate_clks));
+ }
exynos5420_clk_sleep_init();
}
+
+static void __init exynos5420_clk_init(struct device_node *np)
+{
+ exynos5x_clk_init(np, EXYNOS5420);
+}
CLK_OF_DECLARE(exynos5420_clk, "samsung,exynos5420-clock", exynos5420_clk_init);
+
+static void __init exynos5800_clk_init(struct device_node *np)
+{
+ exynos5x_clk_init(np, EXYNOS5800);
+}
+CLK_OF_DECLARE(exynos5800_clk, "samsung,exynos5800-clock", exynos5800_clk_init);
diff --git a/drivers/clk/samsung/clk-exynos5440.c b/drivers/clk/samsung/clk-exynos5440.c
index 2bfad5a993d0..647f1440aa6a 100644
--- a/drivers/clk/samsung/clk-exynos5440.c
+++ b/drivers/clk/samsung/clk-exynos5440.c
@@ -93,6 +93,7 @@ static struct of_device_id ext_clk_match[] __initdata = {
static void __init exynos5440_clk_init(struct device_node *np)
{
void __iomem *reg_base;
+ struct samsung_clk_provider *ctx;
reg_base = of_iomap(np, 0);
if (!reg_base) {
@@ -101,22 +102,25 @@ static void __init exynos5440_clk_init(struct device_node *np)
return;
}
- samsung_clk_init(np, reg_base, CLK_NR_CLKS);
- samsung_clk_of_register_fixed_ext(exynos5440_fixed_rate_ext_clks,
+ ctx = samsung_clk_init(np, reg_base, CLK_NR_CLKS);
+ if (!ctx)
+ panic("%s: unable to allocate context.\n", __func__);
+
+ samsung_clk_of_register_fixed_ext(ctx, exynos5440_fixed_rate_ext_clks,
ARRAY_SIZE(exynos5440_fixed_rate_ext_clks), ext_clk_match);
samsung_clk_register_pll2550x("cplla", "xtal", reg_base + 0x1c, 0x10);
samsung_clk_register_pll2550x("cpllb", "xtal", reg_base + 0x20, 0x10);
- samsung_clk_register_fixed_rate(exynos5440_fixed_rate_clks,
+ samsung_clk_register_fixed_rate(ctx, exynos5440_fixed_rate_clks,
ARRAY_SIZE(exynos5440_fixed_rate_clks));
- samsung_clk_register_fixed_factor(exynos5440_fixed_factor_clks,
+ samsung_clk_register_fixed_factor(ctx, exynos5440_fixed_factor_clks,
ARRAY_SIZE(exynos5440_fixed_factor_clks));
- samsung_clk_register_mux(exynos5440_mux_clks,
+ samsung_clk_register_mux(ctx, exynos5440_mux_clks,
ARRAY_SIZE(exynos5440_mux_clks));
- samsung_clk_register_div(exynos5440_div_clks,
+ samsung_clk_register_div(ctx, exynos5440_div_clks,
ARRAY_SIZE(exynos5440_div_clks));
- samsung_clk_register_gate(exynos5440_gate_clks,
+ samsung_clk_register_gate(ctx, exynos5440_gate_clks,
ARRAY_SIZE(exynos5440_gate_clks));
pr_info("Exynos5440: arm_clk = %ldHz\n", _get_rate("arm_clk"));
diff --git a/drivers/clk/samsung/clk-pll.c b/drivers/clk/samsung/clk-pll.c
index 7fb0a28e65d5..b07fad2a9167 100644
--- a/drivers/clk/samsung/clk-pll.c
+++ b/drivers/clk/samsung/clk-pll.c
@@ -947,8 +947,206 @@ struct clk * __init samsung_clk_register_pll2550x(const char *name,
return clk;
}
-static void __init _samsung_clk_register_pll(struct samsung_pll_clock *pll_clk,
- void __iomem *base)
+/*
+ * PLL2550xx Clock Type
+ */
+
+/* Maximum lock time can be 270 * PDIV cycles */
+#define PLL2550XX_LOCK_FACTOR 270
+
+#define PLL2550XX_M_MASK 0x3FF
+#define PLL2550XX_P_MASK 0x3F
+#define PLL2550XX_S_MASK 0x7
+#define PLL2550XX_LOCK_STAT_MASK 0x1
+#define PLL2550XX_M_SHIFT 9
+#define PLL2550XX_P_SHIFT 3
+#define PLL2550XX_S_SHIFT 0
+#define PLL2550XX_LOCK_STAT_SHIFT 21
+
+static unsigned long samsung_pll2550xx_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct samsung_clk_pll *pll = to_clk_pll(hw);
+ u32 mdiv, pdiv, sdiv, pll_con;
+ u64 fvco = parent_rate;
+
+ pll_con = __raw_readl(pll->con_reg);
+ mdiv = (pll_con >> PLL2550XX_M_SHIFT) & PLL2550XX_M_MASK;
+ pdiv = (pll_con >> PLL2550XX_P_SHIFT) & PLL2550XX_P_MASK;
+ sdiv = (pll_con >> PLL2550XX_S_SHIFT) & PLL2550XX_S_MASK;
+
+ fvco *= mdiv;
+ do_div(fvco, (pdiv << sdiv));
+
+ return (unsigned long)fvco;
+}
+
+static inline bool samsung_pll2550xx_mp_change(u32 mdiv, u32 pdiv, u32 pll_con)
+{
+ u32 old_mdiv, old_pdiv;
+
+ old_mdiv = (pll_con >> PLL2550XX_M_SHIFT) & PLL2550XX_M_MASK;
+ old_pdiv = (pll_con >> PLL2550XX_P_SHIFT) & PLL2550XX_P_MASK;
+
+ return mdiv != old_mdiv || pdiv != old_pdiv;
+}
+
+static int samsung_pll2550xx_set_rate(struct clk_hw *hw, unsigned long drate,
+ unsigned long prate)
+{
+ struct samsung_clk_pll *pll = to_clk_pll(hw);
+ const struct samsung_pll_rate_table *rate;
+ u32 tmp;
+
+ /* Get required rate settings from table */
+ rate = samsung_get_pll_settings(pll, drate);
+ if (!rate) {
+ pr_err("%s: Invalid rate : %lu for pll clk %s\n", __func__,
+ drate, __clk_get_name(hw->clk));
+ return -EINVAL;
+ }
+
+ tmp = __raw_readl(pll->con_reg);
+
+ if (!(samsung_pll2550xx_mp_change(rate->mdiv, rate->pdiv, tmp))) {
+ /* If only s change, change just s value only*/
+ tmp &= ~(PLL2550XX_S_MASK << PLL2550XX_S_SHIFT);
+ tmp |= rate->sdiv << PLL2550XX_S_SHIFT;
+ __raw_writel(tmp, pll->con_reg);
+
+ return 0;
+ }
+
+ /* Set PLL lock time. */
+ __raw_writel(rate->pdiv * PLL2550XX_LOCK_FACTOR, pll->lock_reg);
+
+ /* Change PLL PMS values */
+ tmp &= ~((PLL2550XX_M_MASK << PLL2550XX_M_SHIFT) |
+ (PLL2550XX_P_MASK << PLL2550XX_P_SHIFT) |
+ (PLL2550XX_S_MASK << PLL2550XX_S_SHIFT));
+ tmp |= (rate->mdiv << PLL2550XX_M_SHIFT) |
+ (rate->pdiv << PLL2550XX_P_SHIFT) |
+ (rate->sdiv << PLL2550XX_S_SHIFT);
+ __raw_writel(tmp, pll->con_reg);
+
+ /* wait_lock_time */
+ do {
+ cpu_relax();
+ tmp = __raw_readl(pll->con_reg);
+ } while (!(tmp & (PLL2550XX_LOCK_STAT_MASK
+ << PLL2550XX_LOCK_STAT_SHIFT)));
+
+ return 0;
+}
+
+static const struct clk_ops samsung_pll2550xx_clk_ops = {
+ .recalc_rate = samsung_pll2550xx_recalc_rate,
+ .round_rate = samsung_pll_round_rate,
+ .set_rate = samsung_pll2550xx_set_rate,
+};
+
+static const struct clk_ops samsung_pll2550xx_clk_min_ops = {
+ .recalc_rate = samsung_pll2550xx_recalc_rate,
+};
+
+/*
+ * PLL2650XX Clock Type
+ */
+
+/* Maximum lock time can be 3000 * PDIV cycles */
+#define PLL2650XX_LOCK_FACTOR 3000
+
+#define PLL2650XX_MDIV_SHIFT 9
+#define PLL2650XX_PDIV_SHIFT 3
+#define PLL2650XX_SDIV_SHIFT 0
+#define PLL2650XX_KDIV_SHIFT 0
+#define PLL2650XX_MDIV_MASK 0x1ff
+#define PLL2650XX_PDIV_MASK 0x3f
+#define PLL2650XX_SDIV_MASK 0x7
+#define PLL2650XX_KDIV_MASK 0xffff
+#define PLL2650XX_PLL_ENABLE_SHIFT 23
+#define PLL2650XX_PLL_LOCKTIME_SHIFT 21
+#define PLL2650XX_PLL_FOUTMASK_SHIFT 31
+
+static unsigned long samsung_pll2650xx_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct samsung_clk_pll *pll = to_clk_pll(hw);
+ u32 mdiv, pdiv, sdiv, pll_con0, pll_con2;
+ s16 kdiv;
+ u64 fvco = parent_rate;
+
+ pll_con0 = __raw_readl(pll->con_reg);
+ pll_con2 = __raw_readl(pll->con_reg + 8);
+ mdiv = (pll_con0 >> PLL2650XX_MDIV_SHIFT) & PLL2650XX_MDIV_MASK;
+ pdiv = (pll_con0 >> PLL2650XX_PDIV_SHIFT) & PLL2650XX_PDIV_MASK;
+ sdiv = (pll_con0 >> PLL2650XX_SDIV_SHIFT) & PLL2650XX_SDIV_MASK;
+ kdiv = (s16)(pll_con2 & PLL2650XX_KDIV_MASK);
+
+ fvco *= (mdiv << 16) + kdiv;
+ do_div(fvco, (pdiv << sdiv));
+ fvco >>= 16;
+
+ return (unsigned long)fvco;
+}
+
+static int samsung_pll2650xx_set_rate(struct clk_hw *hw, unsigned long drate,
+ unsigned long parent_rate)
+{
+ struct samsung_clk_pll *pll = to_clk_pll(hw);
+ u32 tmp, pll_con0, pll_con2;
+ const struct samsung_pll_rate_table *rate;
+
+ rate = samsung_get_pll_settings(pll, drate);
+ if (!rate) {
+ pr_err("%s: Invalid rate : %lu for pll clk %s\n", __func__,
+ drate, __clk_get_name(hw->clk));
+ return -EINVAL;
+ }
+
+ pll_con0 = __raw_readl(pll->con_reg);
+ pll_con2 = __raw_readl(pll->con_reg + 8);
+
+ /* Change PLL PMS values */
+ pll_con0 &= ~(PLL2650XX_MDIV_MASK << PLL2650XX_MDIV_SHIFT |
+ PLL2650XX_PDIV_MASK << PLL2650XX_PDIV_SHIFT |
+ PLL2650XX_SDIV_MASK << PLL2650XX_SDIV_SHIFT);
+ pll_con0 |= rate->mdiv << PLL2650XX_MDIV_SHIFT;
+ pll_con0 |= rate->pdiv << PLL2650XX_PDIV_SHIFT;
+ pll_con0 |= rate->sdiv << PLL2650XX_SDIV_SHIFT;
+ pll_con0 |= 1 << PLL2650XX_PLL_ENABLE_SHIFT;
+ pll_con0 |= 1 << PLL2650XX_PLL_FOUTMASK_SHIFT;
+
+ pll_con2 &= ~(PLL2650XX_KDIV_MASK << PLL2650XX_KDIV_SHIFT);
+ pll_con2 |= ((~(rate->kdiv) + 1) & PLL2650XX_KDIV_MASK)
+ << PLL2650XX_KDIV_SHIFT;
+
+ /* Set PLL lock time. */
+ __raw_writel(PLL2650XX_LOCK_FACTOR * rate->pdiv, pll->lock_reg);
+
+ __raw_writel(pll_con0, pll->con_reg);
+ __raw_writel(pll_con2, pll->con_reg + 8);
+
+ do {
+ tmp = __raw_readl(pll->con_reg);
+ } while (!(tmp & (0x1 << PLL2650XX_PLL_LOCKTIME_SHIFT)));
+
+ return 0;
+}
+
+static const struct clk_ops samsung_pll2650xx_clk_ops = {
+ .recalc_rate = samsung_pll2650xx_recalc_rate,
+ .set_rate = samsung_pll2650xx_set_rate,
+ .round_rate = samsung_pll_round_rate,
+};
+
+static const struct clk_ops samsung_pll2650xx_clk_min_ops = {
+ .recalc_rate = samsung_pll2650xx_recalc_rate,
+};
+
+static void __init _samsung_clk_register_pll(struct samsung_clk_provider *ctx,
+ struct samsung_pll_clock *pll_clk,
+ void __iomem *base)
{
struct samsung_clk_pll *pll;
struct clk *clk;
@@ -1048,6 +1246,18 @@ static void __init _samsung_clk_register_pll(struct samsung_pll_clock *pll_clk,
else
init.ops = &samsung_s3c2440_mpll_clk_ops;
break;
+ case pll_2550xx:
+ if (!pll->rate_table)
+ init.ops = &samsung_pll2550xx_clk_min_ops;
+ else
+ init.ops = &samsung_pll2550xx_clk_ops;
+ break;
+ case pll_2650xx:
+ if (!pll->rate_table)
+ init.ops = &samsung_pll2650xx_clk_min_ops;
+ else
+ init.ops = &samsung_pll2650xx_clk_ops;
+ break;
default:
pr_warn("%s: Unknown pll type for pll clk %s\n",
__func__, pll_clk->name);
@@ -1066,7 +1276,7 @@ static void __init _samsung_clk_register_pll(struct samsung_pll_clock *pll_clk,
return;
}
- samsung_clk_add_lookup(clk, pll_clk->id);
+ samsung_clk_add_lookup(ctx, clk, pll_clk->id);
if (!pll_clk->alias)
return;
@@ -1077,11 +1287,12 @@ static void __init _samsung_clk_register_pll(struct samsung_pll_clock *pll_clk,
__func__, pll_clk->name, ret);
}
-void __init samsung_clk_register_pll(struct samsung_pll_clock *pll_list,
- unsigned int nr_pll, void __iomem *base)
+void __init samsung_clk_register_pll(struct samsung_clk_provider *ctx,
+ struct samsung_pll_clock *pll_list,
+ unsigned int nr_pll, void __iomem *base)
{
int cnt;
for (cnt = 0; cnt < nr_pll; cnt++)
- _samsung_clk_register_pll(&pll_list[cnt], base);
+ _samsung_clk_register_pll(ctx, &pll_list[cnt], base);
}
diff --git a/drivers/clk/samsung/clk-pll.h b/drivers/clk/samsung/clk-pll.h
index 6428bcc6df6f..c0ed4d41fd90 100644
--- a/drivers/clk/samsung/clk-pll.h
+++ b/drivers/clk/samsung/clk-pll.h
@@ -31,6 +31,8 @@ enum samsung_pll_type {
pll_s3c2410_mpll,
pll_s3c2410_upll,
pll_s3c2440_mpll,
+ pll_2550xx,
+ pll_2650xx,
};
#define PLL_35XX_RATE(_rate, _m, _p, _s) \
diff --git a/drivers/clk/samsung/clk-s3c2410.c b/drivers/clk/samsung/clk-s3c2410.c
index 7b4182186a30..ba0716801db2 100644
--- a/drivers/clk/samsung/clk-s3c2410.c
+++ b/drivers/clk/samsung/clk-s3c2410.c
@@ -344,21 +344,24 @@ struct samsung_fixed_rate_clock s3c2410_common_frate_clks[] __initdata = {
FRATE(XTI, "xti", NULL, CLK_IS_ROOT, 0),
};
-static void __init s3c2410_common_clk_register_fixed_ext(unsigned long xti_f)
+static void __init s3c2410_common_clk_register_fixed_ext(
+ struct samsung_clk_provider *ctx,
+ unsigned long xti_f)
{
struct samsung_clock_alias xti_alias = ALIAS(XTI, NULL, "xtal");
s3c2410_common_frate_clks[0].fixed_rate = xti_f;
- samsung_clk_register_fixed_rate(s3c2410_common_frate_clks,
+ samsung_clk_register_fixed_rate(ctx, s3c2410_common_frate_clks,
ARRAY_SIZE(s3c2410_common_frate_clks));
- samsung_clk_register_alias(&xti_alias, 1);
+ samsung_clk_register_alias(ctx, &xti_alias, 1);
}
void __init s3c2410_common_clk_init(struct device_node *np, unsigned long xti_f,
int current_soc,
void __iomem *base)
{
+ struct samsung_clk_provider *ctx;
reg_base = base;
if (np) {
@@ -367,11 +370,13 @@ void __init s3c2410_common_clk_init(struct device_node *np, unsigned long xti_f,
panic("%s: failed to map registers\n", __func__);
}
- samsung_clk_init(np, reg_base, NR_CLKS);
+ ctx = samsung_clk_init(np, reg_base, NR_CLKS);
+ if (!ctx)
+ panic("%s: unable to allocate context.\n", __func__);
/* Register external clocks only in non-dt cases */
if (!np)
- s3c2410_common_clk_register_fixed_ext(xti_f);
+ s3c2410_common_clk_register_fixed_ext(ctx, xti_f);
if (current_soc == 2410) {
if (_get_rate("xti") == 12 * MHZ) {
@@ -380,7 +385,7 @@ void __init s3c2410_common_clk_init(struct device_node *np, unsigned long xti_f,
}
/* Register PLLs. */
- samsung_clk_register_pll(s3c2410_plls,
+ samsung_clk_register_pll(ctx, s3c2410_plls,
ARRAY_SIZE(s3c2410_plls), reg_base);
} else { /* S3C2440, S3C2442 */
@@ -396,49 +401,49 @@ void __init s3c2410_common_clk_init(struct device_node *np, unsigned long xti_f,
}
/* Register PLLs. */
- samsung_clk_register_pll(s3c244x_common_plls,
+ samsung_clk_register_pll(ctx, s3c244x_common_plls,
ARRAY_SIZE(s3c244x_common_plls), reg_base);
}
/* Register common internal clocks. */
- samsung_clk_register_mux(s3c2410_common_muxes,
+ samsung_clk_register_mux(ctx, s3c2410_common_muxes,
ARRAY_SIZE(s3c2410_common_muxes));
- samsung_clk_register_div(s3c2410_common_dividers,
+ samsung_clk_register_div(ctx, s3c2410_common_dividers,
ARRAY_SIZE(s3c2410_common_dividers));
- samsung_clk_register_gate(s3c2410_common_gates,
+ samsung_clk_register_gate(ctx, s3c2410_common_gates,
ARRAY_SIZE(s3c2410_common_gates));
if (current_soc == S3C2440 || current_soc == S3C2442) {
- samsung_clk_register_div(s3c244x_common_dividers,
+ samsung_clk_register_div(ctx, s3c244x_common_dividers,
ARRAY_SIZE(s3c244x_common_dividers));
- samsung_clk_register_gate(s3c244x_common_gates,
+ samsung_clk_register_gate(ctx, s3c244x_common_gates,
ARRAY_SIZE(s3c244x_common_gates));
- samsung_clk_register_mux(s3c244x_common_muxes,
+ samsung_clk_register_mux(ctx, s3c244x_common_muxes,
ARRAY_SIZE(s3c244x_common_muxes));
- samsung_clk_register_fixed_factor(s3c244x_common_ffactor,
+ samsung_clk_register_fixed_factor(ctx, s3c244x_common_ffactor,
ARRAY_SIZE(s3c244x_common_ffactor));
}
/* Register SoC-specific clocks. */
switch (current_soc) {
case S3C2410:
- samsung_clk_register_div(s3c2410_dividers,
+ samsung_clk_register_div(ctx, s3c2410_dividers,
ARRAY_SIZE(s3c2410_dividers));
- samsung_clk_register_fixed_factor(s3c2410_ffactor,
+ samsung_clk_register_fixed_factor(ctx, s3c2410_ffactor,
ARRAY_SIZE(s3c2410_ffactor));
- samsung_clk_register_alias(s3c2410_aliases,
+ samsung_clk_register_alias(ctx, s3c2410_aliases,
ARRAY_SIZE(s3c2410_common_aliases));
break;
case S3C2440:
- samsung_clk_register_mux(s3c2440_muxes,
+ samsung_clk_register_mux(ctx, s3c2440_muxes,
ARRAY_SIZE(s3c2440_muxes));
- samsung_clk_register_gate(s3c2440_gates,
+ samsung_clk_register_gate(ctx, s3c2440_gates,
ARRAY_SIZE(s3c2440_gates));
break;
case S3C2442:
- samsung_clk_register_mux(s3c2442_muxes,
+ samsung_clk_register_mux(ctx, s3c2442_muxes,
ARRAY_SIZE(s3c2442_muxes));
- samsung_clk_register_fixed_factor(s3c2442_ffactor,
+ samsung_clk_register_fixed_factor(ctx, s3c2442_ffactor,
ARRAY_SIZE(s3c2442_ffactor));
break;
}
@@ -447,11 +452,11 @@ void __init s3c2410_common_clk_init(struct device_node *np, unsigned long xti_f,
* Register common aliases at the end, as some of the aliased clocks
* are SoC specific.
*/
- samsung_clk_register_alias(s3c2410_common_aliases,
+ samsung_clk_register_alias(ctx, s3c2410_common_aliases,
ARRAY_SIZE(s3c2410_common_aliases));
if (current_soc == S3C2440 || current_soc == S3C2442) {
- samsung_clk_register_alias(s3c244x_common_aliases,
+ samsung_clk_register_alias(ctx, s3c244x_common_aliases,
ARRAY_SIZE(s3c244x_common_aliases));
}
diff --git a/drivers/clk/samsung/clk-s3c2412.c b/drivers/clk/samsung/clk-s3c2412.c
index 0f11a07d5c01..23e4313f625e 100644
--- a/drivers/clk/samsung/clk-s3c2412.c
+++ b/drivers/clk/samsung/clk-s3c2412.c
@@ -214,23 +214,25 @@ struct samsung_fixed_rate_clock s3c2412_common_frate_clks[] __initdata = {
FRATE(0, "ext", NULL, CLK_IS_ROOT, 0),
};
-static void __init s3c2412_common_clk_register_fixed_ext(unsigned long xti_f,
- unsigned long ext_f)
+static void __init s3c2412_common_clk_register_fixed_ext(
+ struct samsung_clk_provider *ctx,
+ unsigned long xti_f, unsigned long ext_f)
{
/* xtal alias is necessary for the current cpufreq driver */
struct samsung_clock_alias xti_alias = ALIAS(XTI, NULL, "xtal");
s3c2412_common_frate_clks[0].fixed_rate = xti_f;
s3c2412_common_frate_clks[1].fixed_rate = ext_f;
- samsung_clk_register_fixed_rate(s3c2412_common_frate_clks,
+ samsung_clk_register_fixed_rate(ctx, s3c2412_common_frate_clks,
ARRAY_SIZE(s3c2412_common_frate_clks));
- samsung_clk_register_alias(&xti_alias, 1);
+ samsung_clk_register_alias(ctx, &xti_alias, 1);
}
void __init s3c2412_common_clk_init(struct device_node *np, unsigned long xti_f,
unsigned long ext_f, void __iomem *base)
{
+ struct samsung_clk_provider *ctx;
reg_base = base;
if (np) {
@@ -239,24 +241,27 @@ void __init s3c2412_common_clk_init(struct device_node *np, unsigned long xti_f,
panic("%s: failed to map registers\n", __func__);
}
- samsung_clk_init(np, reg_base, NR_CLKS);
+ ctx = samsung_clk_init(np, reg_base, NR_CLKS);
+ if (!ctx)
+ panic("%s: unable to allocate context.\n", __func__);
/* Register external clocks only in non-dt cases */
if (!np)
- s3c2412_common_clk_register_fixed_ext(xti_f, ext_f);
+ s3c2412_common_clk_register_fixed_ext(ctx, xti_f, ext_f);
/* Register PLLs. */
- samsung_clk_register_pll(s3c2412_plls, ARRAY_SIZE(s3c2412_plls),
+ samsung_clk_register_pll(ctx, s3c2412_plls, ARRAY_SIZE(s3c2412_plls),
reg_base);
/* Register common internal clocks. */
- samsung_clk_register_mux(s3c2412_muxes, ARRAY_SIZE(s3c2412_muxes));
- samsung_clk_register_div(s3c2412_dividers,
+ samsung_clk_register_mux(ctx, s3c2412_muxes, ARRAY_SIZE(s3c2412_muxes));
+ samsung_clk_register_div(ctx, s3c2412_dividers,
ARRAY_SIZE(s3c2412_dividers));
- samsung_clk_register_gate(s3c2412_gates, ARRAY_SIZE(s3c2412_gates));
- samsung_clk_register_fixed_factor(s3c2412_ffactor,
+ samsung_clk_register_gate(ctx, s3c2412_gates,
+ ARRAY_SIZE(s3c2412_gates));
+ samsung_clk_register_fixed_factor(ctx, s3c2412_ffactor,
ARRAY_SIZE(s3c2412_ffactor));
- samsung_clk_register_alias(s3c2412_aliases,
+ samsung_clk_register_alias(ctx, s3c2412_aliases,
ARRAY_SIZE(s3c2412_aliases));
s3c2412_clk_sleep_init();
diff --git a/drivers/clk/samsung/clk-s3c2443.c b/drivers/clk/samsung/clk-s3c2443.c
index 8e4f4517e95c..c4bbdabebaa4 100644
--- a/drivers/clk/samsung/clk-s3c2443.c
+++ b/drivers/clk/samsung/clk-s3c2443.c
@@ -365,10 +365,11 @@ struct samsung_fixed_rate_clock s3c2443_common_frate_clks[] __initdata = {
FRATE(0, "ext_uart", NULL, CLK_IS_ROOT, 0),
};
-static void __init s3c2443_common_clk_register_fixed_ext(unsigned long xti_f)
+static void __init s3c2443_common_clk_register_fixed_ext(
+ struct samsung_clk_provider *ctx, unsigned long xti_f)
{
s3c2443_common_frate_clks[0].fixed_rate = xti_f;
- samsung_clk_register_fixed_rate(s3c2443_common_frate_clks,
+ samsung_clk_register_fixed_rate(ctx, s3c2443_common_frate_clks,
ARRAY_SIZE(s3c2443_common_frate_clks));
}
@@ -376,6 +377,7 @@ void __init s3c2443_common_clk_init(struct device_node *np, unsigned long xti_f,
int current_soc,
void __iomem *base)
{
+ struct samsung_clk_provider *ctx;
reg_base = base;
if (np) {
@@ -384,58 +386,60 @@ void __init s3c2443_common_clk_init(struct device_node *np, unsigned long xti_f,
panic("%s: failed to map registers\n", __func__);
}
- samsung_clk_init(np, reg_base, NR_CLKS);
+ ctx = samsung_clk_init(np, reg_base, NR_CLKS);
+ if (!ctx)
+ panic("%s: unable to allocate context.\n", __func__);
/* Register external clocks only in non-dt cases */
if (!np)
- s3c2443_common_clk_register_fixed_ext(xti_f);
+ s3c2443_common_clk_register_fixed_ext(ctx, xti_f);
/* Register PLLs. */
if (current_soc == S3C2416 || current_soc == S3C2450)
- samsung_clk_register_pll(s3c2416_pll_clks,
+ samsung_clk_register_pll(ctx, s3c2416_pll_clks,
ARRAY_SIZE(s3c2416_pll_clks), reg_base);
else
- samsung_clk_register_pll(s3c2443_pll_clks,
+ samsung_clk_register_pll(ctx, s3c2443_pll_clks,
ARRAY_SIZE(s3c2443_pll_clks), reg_base);
/* Register common internal clocks. */
- samsung_clk_register_mux(s3c2443_common_muxes,
+ samsung_clk_register_mux(ctx, s3c2443_common_muxes,
ARRAY_SIZE(s3c2443_common_muxes));
- samsung_clk_register_div(s3c2443_common_dividers,
+ samsung_clk_register_div(ctx, s3c2443_common_dividers,
ARRAY_SIZE(s3c2443_common_dividers));
- samsung_clk_register_gate(s3c2443_common_gates,
+ samsung_clk_register_gate(ctx, s3c2443_common_gates,
ARRAY_SIZE(s3c2443_common_gates));
- samsung_clk_register_alias(s3c2443_common_aliases,
+ samsung_clk_register_alias(ctx, s3c2443_common_aliases,
ARRAY_SIZE(s3c2443_common_aliases));
/* Register SoC-specific clocks. */
switch (current_soc) {
case S3C2450:
- samsung_clk_register_div(s3c2450_dividers,
+ samsung_clk_register_div(ctx, s3c2450_dividers,
ARRAY_SIZE(s3c2450_dividers));
- samsung_clk_register_mux(s3c2450_muxes,
+ samsung_clk_register_mux(ctx, s3c2450_muxes,
ARRAY_SIZE(s3c2450_muxes));
- samsung_clk_register_gate(s3c2450_gates,
+ samsung_clk_register_gate(ctx, s3c2450_gates,
ARRAY_SIZE(s3c2450_gates));
- samsung_clk_register_alias(s3c2450_aliases,
+ samsung_clk_register_alias(ctx, s3c2450_aliases,
ARRAY_SIZE(s3c2450_aliases));
/* fall through, as s3c2450 extends the s3c2416 clocks */
case S3C2416:
- samsung_clk_register_div(s3c2416_dividers,
+ samsung_clk_register_div(ctx, s3c2416_dividers,
ARRAY_SIZE(s3c2416_dividers));
- samsung_clk_register_mux(s3c2416_muxes,
+ samsung_clk_register_mux(ctx, s3c2416_muxes,
ARRAY_SIZE(s3c2416_muxes));
- samsung_clk_register_gate(s3c2416_gates,
+ samsung_clk_register_gate(ctx, s3c2416_gates,
ARRAY_SIZE(s3c2416_gates));
- samsung_clk_register_alias(s3c2416_aliases,
+ samsung_clk_register_alias(ctx, s3c2416_aliases,
ARRAY_SIZE(s3c2416_aliases));
break;
case S3C2443:
- samsung_clk_register_div(s3c2443_dividers,
+ samsung_clk_register_div(ctx, s3c2443_dividers,
ARRAY_SIZE(s3c2443_dividers));
- samsung_clk_register_gate(s3c2443_gates,
+ samsung_clk_register_gate(ctx, s3c2443_gates,
ARRAY_SIZE(s3c2443_gates));
- samsung_clk_register_alias(s3c2443_aliases,
+ samsung_clk_register_alias(ctx, s3c2443_aliases,
ARRAY_SIZE(s3c2443_aliases));
break;
}
diff --git a/drivers/clk/samsung/clk-s3c64xx.c b/drivers/clk/samsung/clk-s3c64xx.c
index 8bda658137a8..efa16ee592c8 100644
--- a/drivers/clk/samsung/clk-s3c64xx.c
+++ b/drivers/clk/samsung/clk-s3c64xx.c
@@ -442,12 +442,14 @@ static struct samsung_clock_alias s3c6410_clock_aliases[] = {
ALIAS(MEM0_SROM, NULL, "srom"),
};
-static void __init s3c64xx_clk_register_fixed_ext(unsigned long fin_pll_f,
- unsigned long xusbxti_f)
+static void __init s3c64xx_clk_register_fixed_ext(
+ struct samsung_clk_provider *ctx,
+ unsigned long fin_pll_f,
+ unsigned long xusbxti_f)
{
s3c64xx_fixed_rate_ext_clks[0].fixed_rate = fin_pll_f;
s3c64xx_fixed_rate_ext_clks[1].fixed_rate = xusbxti_f;
- samsung_clk_register_fixed_rate(s3c64xx_fixed_rate_ext_clks,
+ samsung_clk_register_fixed_rate(ctx, s3c64xx_fixed_rate_ext_clks,
ARRAY_SIZE(s3c64xx_fixed_rate_ext_clks));
}
@@ -456,6 +458,8 @@ void __init s3c64xx_clk_init(struct device_node *np, unsigned long xtal_f,
unsigned long xusbxti_f, bool s3c6400,
void __iomem *base)
{
+ struct samsung_clk_provider *ctx;
+
reg_base = base;
is_s3c6400 = s3c6400;
@@ -465,48 +469,50 @@ void __init s3c64xx_clk_init(struct device_node *np, unsigned long xtal_f,
panic("%s: failed to map registers\n", __func__);
}
- samsung_clk_init(np, reg_base, NR_CLKS);
+ ctx = samsung_clk_init(np, reg_base, NR_CLKS);
+ if (!ctx)
+ panic("%s: unable to allocate context.\n", __func__);
/* Register external clocks. */
if (!np)
- s3c64xx_clk_register_fixed_ext(xtal_f, xusbxti_f);
+ s3c64xx_clk_register_fixed_ext(ctx, xtal_f, xusbxti_f);
/* Register PLLs. */
- samsung_clk_register_pll(s3c64xx_pll_clks,
+ samsung_clk_register_pll(ctx, s3c64xx_pll_clks,
ARRAY_SIZE(s3c64xx_pll_clks), reg_base);
/* Register common internal clocks. */
- samsung_clk_register_fixed_rate(s3c64xx_fixed_rate_clks,
+ samsung_clk_register_fixed_rate(ctx, s3c64xx_fixed_rate_clks,
ARRAY_SIZE(s3c64xx_fixed_rate_clks));
- samsung_clk_register_mux(s3c64xx_mux_clks,
+ samsung_clk_register_mux(ctx, s3c64xx_mux_clks,
ARRAY_SIZE(s3c64xx_mux_clks));
- samsung_clk_register_div(s3c64xx_div_clks,
+ samsung_clk_register_div(ctx, s3c64xx_div_clks,
ARRAY_SIZE(s3c64xx_div_clks));
- samsung_clk_register_gate(s3c64xx_gate_clks,
+ samsung_clk_register_gate(ctx, s3c64xx_gate_clks,
ARRAY_SIZE(s3c64xx_gate_clks));
/* Register SoC-specific clocks. */
if (is_s3c6400) {
- samsung_clk_register_mux(s3c6400_mux_clks,
+ samsung_clk_register_mux(ctx, s3c6400_mux_clks,
ARRAY_SIZE(s3c6400_mux_clks));
- samsung_clk_register_div(s3c6400_div_clks,
+ samsung_clk_register_div(ctx, s3c6400_div_clks,
ARRAY_SIZE(s3c6400_div_clks));
- samsung_clk_register_gate(s3c6400_gate_clks,
+ samsung_clk_register_gate(ctx, s3c6400_gate_clks,
ARRAY_SIZE(s3c6400_gate_clks));
- samsung_clk_register_alias(s3c6400_clock_aliases,
+ samsung_clk_register_alias(ctx, s3c6400_clock_aliases,
ARRAY_SIZE(s3c6400_clock_aliases));
} else {
- samsung_clk_register_mux(s3c6410_mux_clks,
+ samsung_clk_register_mux(ctx, s3c6410_mux_clks,
ARRAY_SIZE(s3c6410_mux_clks));
- samsung_clk_register_div(s3c6410_div_clks,
+ samsung_clk_register_div(ctx, s3c6410_div_clks,
ARRAY_SIZE(s3c6410_div_clks));
- samsung_clk_register_gate(s3c6410_gate_clks,
+ samsung_clk_register_gate(ctx, s3c6410_gate_clks,
ARRAY_SIZE(s3c6410_gate_clks));
- samsung_clk_register_alias(s3c6410_clock_aliases,
+ samsung_clk_register_alias(ctx, s3c6410_clock_aliases,
ARRAY_SIZE(s3c6410_clock_aliases));
}
- samsung_clk_register_alias(s3c64xx_clock_aliases,
+ samsung_clk_register_alias(ctx, s3c64xx_clock_aliases,
ARRAY_SIZE(s3c64xx_clock_aliases));
s3c64xx_clk_sleep_init();
diff --git a/drivers/clk/samsung/clk.c b/drivers/clk/samsung/clk.c
index 91bec3ebdc8f..49629c71c9e7 100644
--- a/drivers/clk/samsung/clk.c
+++ b/drivers/clk/samsung/clk.c
@@ -14,13 +14,6 @@
#include <linux/syscore_ops.h>
#include "clk.h"
-static DEFINE_SPINLOCK(lock);
-static struct clk **clk_table;
-static void __iomem *reg_base;
-#ifdef CONFIG_OF
-static struct clk_onecell_data clk_data;
-#endif
-
void samsung_clk_save(void __iomem *base,
struct samsung_clk_reg_dump *rd,
unsigned int num_regs)
@@ -55,40 +48,58 @@ struct samsung_clk_reg_dump *samsung_clk_alloc_reg_dump(
}
/* setup the essentials required to support clock lookup using ccf */
-void __init samsung_clk_init(struct device_node *np, void __iomem *base,
- unsigned long nr_clks)
+struct samsung_clk_provider *__init samsung_clk_init(struct device_node *np,
+ void __iomem *base, unsigned long nr_clks)
{
- reg_base = base;
+ struct samsung_clk_provider *ctx;
+ struct clk **clk_table;
+ int ret;
+ int i;
- clk_table = kzalloc(sizeof(struct clk *) * nr_clks, GFP_KERNEL);
+ ctx = kzalloc(sizeof(struct samsung_clk_provider), GFP_KERNEL);
+ if (!ctx)
+ panic("could not allocate clock provider context.\n");
+
+ clk_table = kcalloc(nr_clks, sizeof(struct clk *), GFP_KERNEL);
if (!clk_table)
panic("could not allocate clock lookup table\n");
+ for (i = 0; i < nr_clks; ++i)
+ clk_table[i] = ERR_PTR(-ENOENT);
+
+ ctx->reg_base = base;
+ ctx->clk_data.clks = clk_table;
+ ctx->clk_data.clk_num = nr_clks;
+ spin_lock_init(&ctx->lock);
+
if (!np)
- return;
+ return ctx;
-#ifdef CONFIG_OF
- clk_data.clks = clk_table;
- clk_data.clk_num = nr_clks;
- of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
-#endif
+ ret = of_clk_add_provider(np, of_clk_src_onecell_get,
+ &ctx->clk_data);
+ if (ret)
+ panic("could not register clock provide\n");
+
+ return ctx;
}
/* add a clock instance to the clock lookup table used for dt based lookup */
-void samsung_clk_add_lookup(struct clk *clk, unsigned int id)
+void samsung_clk_add_lookup(struct samsung_clk_provider *ctx, struct clk *clk,
+ unsigned int id)
{
- if (clk_table && id)
- clk_table[id] = clk;
+ if (ctx->clk_data.clks && id)
+ ctx->clk_data.clks[id] = clk;
}
/* register a list of aliases */
-void __init samsung_clk_register_alias(struct samsung_clock_alias *list,
- unsigned int nr_clk)
+void __init samsung_clk_register_alias(struct samsung_clk_provider *ctx,
+ struct samsung_clock_alias *list,
+ unsigned int nr_clk)
{
struct clk *clk;
unsigned int idx, ret;
- if (!clk_table) {
+ if (!ctx->clk_data.clks) {
pr_err("%s: clock table missing\n", __func__);
return;
}
@@ -100,7 +111,7 @@ void __init samsung_clk_register_alias(struct samsung_clock_alias *list,
continue;
}
- clk = clk_table[list->id];
+ clk = ctx->clk_data.clks[list->id];
if (!clk) {
pr_err("%s: failed to find clock %d\n", __func__,
list->id);
@@ -115,7 +126,7 @@ void __init samsung_clk_register_alias(struct samsung_clock_alias *list,
}
/* register a list of fixed clocks */
-void __init samsung_clk_register_fixed_rate(
+void __init samsung_clk_register_fixed_rate(struct samsung_clk_provider *ctx,
struct samsung_fixed_rate_clock *list, unsigned int nr_clk)
{
struct clk *clk;
@@ -130,7 +141,7 @@ void __init samsung_clk_register_fixed_rate(
continue;
}
- samsung_clk_add_lookup(clk, list->id);
+ samsung_clk_add_lookup(ctx, clk, list->id);
/*
* Unconditionally add a clock lookup for the fixed rate clocks.
@@ -144,7 +155,7 @@ void __init samsung_clk_register_fixed_rate(
}
/* register a list of fixed factor clocks */
-void __init samsung_clk_register_fixed_factor(
+void __init samsung_clk_register_fixed_factor(struct samsung_clk_provider *ctx,
struct samsung_fixed_factor_clock *list, unsigned int nr_clk)
{
struct clk *clk;
@@ -159,28 +170,30 @@ void __init samsung_clk_register_fixed_factor(
continue;
}
- samsung_clk_add_lookup(clk, list->id);
+ samsung_clk_add_lookup(ctx, clk, list->id);
}
}
/* register a list of mux clocks */
-void __init samsung_clk_register_mux(struct samsung_mux_clock *list,
- unsigned int nr_clk)
+void __init samsung_clk_register_mux(struct samsung_clk_provider *ctx,
+ struct samsung_mux_clock *list,
+ unsigned int nr_clk)
{
struct clk *clk;
unsigned int idx, ret;
for (idx = 0; idx < nr_clk; idx++, list++) {
clk = clk_register_mux(NULL, list->name, list->parent_names,
- list->num_parents, list->flags, reg_base + list->offset,
- list->shift, list->width, list->mux_flags, &lock);
+ list->num_parents, list->flags,
+ ctx->reg_base + list->offset,
+ list->shift, list->width, list->mux_flags, &ctx->lock);
if (IS_ERR(clk)) {
pr_err("%s: failed to register clock %s\n", __func__,
list->name);
continue;
}
- samsung_clk_add_lookup(clk, list->id);
+ samsung_clk_add_lookup(ctx, clk, list->id);
/* register a clock lookup only if a clock alias is specified */
if (list->alias) {
@@ -194,8 +207,9 @@ void __init samsung_clk_register_mux(struct samsung_mux_clock *list,
}
/* register a list of div clocks */
-void __init samsung_clk_register_div(struct samsung_div_clock *list,
- unsigned int nr_clk)
+void __init samsung_clk_register_div(struct samsung_clk_provider *ctx,
+ struct samsung_div_clock *list,
+ unsigned int nr_clk)
{
struct clk *clk;
unsigned int idx, ret;
@@ -203,22 +217,22 @@ void __init samsung_clk_register_div(struct samsung_div_clock *list,
for (idx = 0; idx < nr_clk; idx++, list++) {
if (list->table)
clk = clk_register_divider_table(NULL, list->name,
- list->parent_name, list->flags,
- reg_base + list->offset, list->shift,
- list->width, list->div_flags,
- list->table, &lock);
+ list->parent_name, list->flags,
+ ctx->reg_base + list->offset,
+ list->shift, list->width, list->div_flags,
+ list->table, &ctx->lock);
else
clk = clk_register_divider(NULL, list->name,
- list->parent_name, list->flags,
- reg_base + list->offset, list->shift,
- list->width, list->div_flags, &lock);
+ list->parent_name, list->flags,
+ ctx->reg_base + list->offset, list->shift,
+ list->width, list->div_flags, &ctx->lock);
if (IS_ERR(clk)) {
pr_err("%s: failed to register clock %s\n", __func__,
list->name);
continue;
}
- samsung_clk_add_lookup(clk, list->id);
+ samsung_clk_add_lookup(ctx, clk, list->id);
/* register a clock lookup only if a clock alias is specified */
if (list->alias) {
@@ -232,16 +246,17 @@ void __init samsung_clk_register_div(struct samsung_div_clock *list,
}
/* register a list of gate clocks */
-void __init samsung_clk_register_gate(struct samsung_gate_clock *list,
- unsigned int nr_clk)
+void __init samsung_clk_register_gate(struct samsung_clk_provider *ctx,
+ struct samsung_gate_clock *list,
+ unsigned int nr_clk)
{
struct clk *clk;
unsigned int idx, ret;
for (idx = 0; idx < nr_clk; idx++, list++) {
clk = clk_register_gate(NULL, list->name, list->parent_name,
- list->flags, reg_base + list->offset,
- list->bit_idx, list->gate_flags, &lock);
+ list->flags, ctx->reg_base + list->offset,
+ list->bit_idx, list->gate_flags, &ctx->lock);
if (IS_ERR(clk)) {
pr_err("%s: failed to register clock %s\n", __func__,
list->name);
@@ -257,7 +272,7 @@ void __init samsung_clk_register_gate(struct samsung_gate_clock *list,
__func__, list->alias);
}
- samsung_clk_add_lookup(clk, list->id);
+ samsung_clk_add_lookup(ctx, clk, list->id);
}
}
@@ -266,21 +281,21 @@ void __init samsung_clk_register_gate(struct samsung_gate_clock *list,
* tree and register it
*/
#ifdef CONFIG_OF
-void __init samsung_clk_of_register_fixed_ext(
+void __init samsung_clk_of_register_fixed_ext(struct samsung_clk_provider *ctx,
struct samsung_fixed_rate_clock *fixed_rate_clk,
unsigned int nr_fixed_rate_clk,
struct of_device_id *clk_matches)
{
const struct of_device_id *match;
- struct device_node *np;
+ struct device_node *clk_np;
u32 freq;
- for_each_matching_node_and_match(np, clk_matches, &match) {
- if (of_property_read_u32(np, "clock-frequency", &freq))
+ for_each_matching_node_and_match(clk_np, clk_matches, &match) {
+ if (of_property_read_u32(clk_np, "clock-frequency", &freq))
continue;
- fixed_rate_clk[(u32)match->data].fixed_rate = freq;
+ fixed_rate_clk[(unsigned long)match->data].fixed_rate = freq;
}
- samsung_clk_register_fixed_rate(fixed_rate_clk, nr_fixed_rate_clk);
+ samsung_clk_register_fixed_rate(ctx, fixed_rate_clk, nr_fixed_rate_clk);
}
#endif
diff --git a/drivers/clk/samsung/clk.h b/drivers/clk/samsung/clk.h
index c7141ba826e0..9693b80d924f 100644
--- a/drivers/clk/samsung/clk.h
+++ b/drivers/clk/samsung/clk.h
@@ -22,6 +22,18 @@
#include "clk-pll.h"
/**
+ * struct samsung_clk_provider: information about clock provider
+ * @reg_base: virtual address for the register base.
+ * @clk_data: holds clock related data like clk* and number of clocks.
+ * @lock: maintains exclusion bwtween callbacks for a given clock-provider.
+ */
+struct samsung_clk_provider {
+ void __iomem *reg_base;
+ struct clk_onecell_data clk_data;
+ spinlock_t lock;
+};
+
+/**
* struct samsung_clock_alias: information about mux clock
* @id: platform specific id of the clock.
* @dev_name: name of the device to which this clock belongs.
@@ -312,40 +324,52 @@ struct samsung_pll_clock {
__PLL(_typ, _id, NULL, _name, _pname, CLK_GET_RATE_NOCACHE, \
_lock, _con, _rtable, _alias)
-extern void __init samsung_clk_init(struct device_node *np, void __iomem *base,
- unsigned long nr_clks);
+extern struct samsung_clk_provider *__init samsung_clk_init(
+ struct device_node *np, void __iomem *base,
+ unsigned long nr_clks);
extern void __init samsung_clk_of_register_fixed_ext(
- struct samsung_fixed_rate_clock *fixed_rate_clk,
- unsigned int nr_fixed_rate_clk,
- struct of_device_id *clk_matches);
+ struct samsung_clk_provider *ctx,
+ struct samsung_fixed_rate_clock *fixed_rate_clk,
+ unsigned int nr_fixed_rate_clk,
+ struct of_device_id *clk_matches);
-extern void samsung_clk_add_lookup(struct clk *clk, unsigned int id);
+extern void samsung_clk_add_lookup(struct samsung_clk_provider *ctx,
+ struct clk *clk, unsigned int id);
-extern void samsung_clk_register_alias(struct samsung_clock_alias *list,
- unsigned int nr_clk);
+extern void samsung_clk_register_alias(struct samsung_clk_provider *ctx,
+ struct samsung_clock_alias *list,
+ unsigned int nr_clk);
extern void __init samsung_clk_register_fixed_rate(
- struct samsung_fixed_rate_clock *clk_list, unsigned int nr_clk);
+ struct samsung_clk_provider *ctx,
+ struct samsung_fixed_rate_clock *clk_list,
+ unsigned int nr_clk);
extern void __init samsung_clk_register_fixed_factor(
- struct samsung_fixed_factor_clock *list, unsigned int nr_clk);
-extern void __init samsung_clk_register_mux(struct samsung_mux_clock *clk_list,
- unsigned int nr_clk);
-extern void __init samsung_clk_register_div(struct samsung_div_clock *clk_list,
- unsigned int nr_clk);
-extern void __init samsung_clk_register_gate(
- struct samsung_gate_clock *clk_list, unsigned int nr_clk);
-extern void __init samsung_clk_register_pll(struct samsung_pll_clock *pll_list,
- unsigned int nr_clk, void __iomem *base);
+ struct samsung_clk_provider *ctx,
+ struct samsung_fixed_factor_clock *list,
+ unsigned int nr_clk);
+extern void __init samsung_clk_register_mux(struct samsung_clk_provider *ctx,
+ struct samsung_mux_clock *clk_list,
+ unsigned int nr_clk);
+extern void __init samsung_clk_register_div(struct samsung_clk_provider *ctx,
+ struct samsung_div_clock *clk_list,
+ unsigned int nr_clk);
+extern void __init samsung_clk_register_gate(struct samsung_clk_provider *ctx,
+ struct samsung_gate_clock *clk_list,
+ unsigned int nr_clk);
+extern void __init samsung_clk_register_pll(struct samsung_clk_provider *ctx,
+ struct samsung_pll_clock *pll_list,
+ unsigned int nr_clk, void __iomem *base);
extern unsigned long _get_rate(const char *clk_name);
extern void samsung_clk_save(void __iomem *base,
- struct samsung_clk_reg_dump *rd,
- unsigned int num_regs);
+ struct samsung_clk_reg_dump *rd,
+ unsigned int num_regs);
extern void samsung_clk_restore(void __iomem *base,
- const struct samsung_clk_reg_dump *rd,
- unsigned int num_regs);
+ const struct samsung_clk_reg_dump *rd,
+ unsigned int num_regs);
extern struct samsung_clk_reg_dump *samsung_clk_alloc_reg_dump(
- const unsigned long *rdump,
- unsigned long nr_rdump);
+ const unsigned long *rdump,
+ unsigned long nr_rdump);
#endif /* __SAMSUNG_CLK_H */
diff --git a/drivers/clocksource/cadence_ttc_timer.c b/drivers/clocksource/cadence_ttc_timer.c
index 49fbe2847c84..7a08811df9aa 100644
--- a/drivers/clocksource/cadence_ttc_timer.c
+++ b/drivers/clocksource/cadence_ttc_timer.c
@@ -118,11 +118,11 @@ static void ttc_set_interval(struct ttc_timer *timer,
u32 ctrl_reg;
/* Disable the counter, set the counter value and re-enable counter */
- ctrl_reg = __raw_readl(timer->base_addr + TTC_CNT_CNTRL_OFFSET);
+ ctrl_reg = readl_relaxed(timer->base_addr + TTC_CNT_CNTRL_OFFSET);
ctrl_reg |= TTC_CNT_CNTRL_DISABLE_MASK;
- __raw_writel(ctrl_reg, timer->base_addr + TTC_CNT_CNTRL_OFFSET);
+ writel_relaxed(ctrl_reg, timer->base_addr + TTC_CNT_CNTRL_OFFSET);
- __raw_writel(cycles, timer->base_addr + TTC_INTR_VAL_OFFSET);
+ writel_relaxed(cycles, timer->base_addr + TTC_INTR_VAL_OFFSET);
/*
* Reset the counter (0x10) so that it starts from 0, one-shot
@@ -130,7 +130,7 @@ static void ttc_set_interval(struct ttc_timer *timer,
*/
ctrl_reg |= CNT_CNTRL_RESET;
ctrl_reg &= ~TTC_CNT_CNTRL_DISABLE_MASK;
- __raw_writel(ctrl_reg, timer->base_addr + TTC_CNT_CNTRL_OFFSET);
+ writel_relaxed(ctrl_reg, timer->base_addr + TTC_CNT_CNTRL_OFFSET);
}
/**
@@ -147,7 +147,7 @@ static irqreturn_t ttc_clock_event_interrupt(int irq, void *dev_id)
struct ttc_timer *timer = &ttce->ttc;
/* Acknowledge the interrupt and call event handler */
- __raw_readl(timer->base_addr + TTC_ISR_OFFSET);
+ readl_relaxed(timer->base_addr + TTC_ISR_OFFSET);
ttce->ce.event_handler(&ttce->ce);
@@ -163,13 +163,13 @@ static cycle_t __ttc_clocksource_read(struct clocksource *cs)
{
struct ttc_timer *timer = &to_ttc_timer_clksrc(cs)->ttc;
- return (cycle_t)__raw_readl(timer->base_addr +
+ return (cycle_t)readl_relaxed(timer->base_addr +
TTC_COUNT_VAL_OFFSET);
}
static u64 notrace ttc_sched_clock_read(void)
{
- return __raw_readl(ttc_sched_clock_val_reg);
+ return readl_relaxed(ttc_sched_clock_val_reg);
}
/**
@@ -211,17 +211,17 @@ static void ttc_set_mode(enum clock_event_mode mode,
case CLOCK_EVT_MODE_ONESHOT:
case CLOCK_EVT_MODE_UNUSED:
case CLOCK_EVT_MODE_SHUTDOWN:
- ctrl_reg = __raw_readl(timer->base_addr +
+ ctrl_reg = readl_relaxed(timer->base_addr +
TTC_CNT_CNTRL_OFFSET);
ctrl_reg |= TTC_CNT_CNTRL_DISABLE_MASK;
- __raw_writel(ctrl_reg,
+ writel_relaxed(ctrl_reg,
timer->base_addr + TTC_CNT_CNTRL_OFFSET);
break;
case CLOCK_EVT_MODE_RESUME:
- ctrl_reg = __raw_readl(timer->base_addr +
+ ctrl_reg = readl_relaxed(timer->base_addr +
TTC_CNT_CNTRL_OFFSET);
ctrl_reg &= ~TTC_CNT_CNTRL_DISABLE_MASK;
- __raw_writel(ctrl_reg,
+ writel_relaxed(ctrl_reg,
timer->base_addr + TTC_CNT_CNTRL_OFFSET);
break;
}
@@ -266,8 +266,8 @@ static int ttc_rate_change_clocksource_cb(struct notifier_block *nb,
* of an abort.
*/
ttccs->scale_clk_ctrl_reg_old =
- __raw_readl(ttccs->ttc.base_addr +
- TTC_CLK_CNTRL_OFFSET);
+ readl_relaxed(ttccs->ttc.base_addr +
+ TTC_CLK_CNTRL_OFFSET);
psv = (ttccs->scale_clk_ctrl_reg_old &
TTC_CLK_CNTRL_PSV_MASK) >>
@@ -291,8 +291,8 @@ static int ttc_rate_change_clocksource_cb(struct notifier_block *nb,
return NOTIFY_DONE;
/* scale up: adjust divider now - before frequency change */
- __raw_writel(ttccs->scale_clk_ctrl_reg_new,
- ttccs->ttc.base_addr + TTC_CLK_CNTRL_OFFSET);
+ writel_relaxed(ttccs->scale_clk_ctrl_reg_new,
+ ttccs->ttc.base_addr + TTC_CLK_CNTRL_OFFSET);
break;
}
case POST_RATE_CHANGE:
@@ -301,8 +301,8 @@ static int ttc_rate_change_clocksource_cb(struct notifier_block *nb,
return NOTIFY_OK;
/* scale down: adjust divider now - after frequency change */
- __raw_writel(ttccs->scale_clk_ctrl_reg_new,
- ttccs->ttc.base_addr + TTC_CLK_CNTRL_OFFSET);
+ writel_relaxed(ttccs->scale_clk_ctrl_reg_new,
+ ttccs->ttc.base_addr + TTC_CLK_CNTRL_OFFSET);
break;
case ABORT_RATE_CHANGE:
@@ -311,8 +311,8 @@ static int ttc_rate_change_clocksource_cb(struct notifier_block *nb,
return NOTIFY_OK;
/* restore original register value */
- __raw_writel(ttccs->scale_clk_ctrl_reg_old,
- ttccs->ttc.base_addr + TTC_CLK_CNTRL_OFFSET);
+ writel_relaxed(ttccs->scale_clk_ctrl_reg_old,
+ ttccs->ttc.base_addr + TTC_CLK_CNTRL_OFFSET);
/* fall through */
default:
return NOTIFY_DONE;
@@ -359,10 +359,10 @@ static void __init ttc_setup_clocksource(struct clk *clk, void __iomem *base)
* with no interrupt and it rolls over at 0xFFFF. Pre-scale
* it by 32 also. Let it start running now.
*/
- __raw_writel(0x0, ttccs->ttc.base_addr + TTC_IER_OFFSET);
- __raw_writel(CLK_CNTRL_PRESCALE | CLK_CNTRL_PRESCALE_EN,
+ writel_relaxed(0x0, ttccs->ttc.base_addr + TTC_IER_OFFSET);
+ writel_relaxed(CLK_CNTRL_PRESCALE | CLK_CNTRL_PRESCALE_EN,
ttccs->ttc.base_addr + TTC_CLK_CNTRL_OFFSET);
- __raw_writel(CNT_CNTRL_RESET,
+ writel_relaxed(CNT_CNTRL_RESET,
ttccs->ttc.base_addr + TTC_CNT_CNTRL_OFFSET);
err = clocksource_register_hz(&ttccs->cs, ttccs->ttc.freq / PRESCALE);
@@ -438,10 +438,10 @@ static void __init ttc_setup_clockevent(struct clk *clk,
* is prescaled by 32 using the interval interrupt. Leave it
* disabled for now.
*/
- __raw_writel(0x23, ttcce->ttc.base_addr + TTC_CNT_CNTRL_OFFSET);
- __raw_writel(CLK_CNTRL_PRESCALE | CLK_CNTRL_PRESCALE_EN,
+ writel_relaxed(0x23, ttcce->ttc.base_addr + TTC_CNT_CNTRL_OFFSET);
+ writel_relaxed(CLK_CNTRL_PRESCALE | CLK_CNTRL_PRESCALE_EN,
ttcce->ttc.base_addr + TTC_CLK_CNTRL_OFFSET);
- __raw_writel(0x1, ttcce->ttc.base_addr + TTC_IER_OFFSET);
+ writel_relaxed(0x1, ttcce->ttc.base_addr + TTC_IER_OFFSET);
err = request_irq(irq, ttc_clock_event_interrupt,
IRQF_TIMER, ttcce->ce.name, ttcce);
@@ -490,7 +490,7 @@ static void __init ttc_timer_init(struct device_node *timer)
BUG();
}
- clksel = __raw_readl(timer_baseaddr + TTC_CLK_CNTRL_OFFSET);
+ clksel = readl_relaxed(timer_baseaddr + TTC_CLK_CNTRL_OFFSET);
clksel = !!(clksel & TTC_CLK_CNTRL_CSRC_MASK);
clk_cs = of_clk_get(timer, clksel);
if (IS_ERR(clk_cs)) {
@@ -498,7 +498,7 @@ static void __init ttc_timer_init(struct device_node *timer)
BUG();
}
- clksel = __raw_readl(timer_baseaddr + 4 + TTC_CLK_CNTRL_OFFSET);
+ clksel = readl_relaxed(timer_baseaddr + 4 + TTC_CLK_CNTRL_OFFSET);
clksel = !!(clksel & TTC_CLK_CNTRL_CSRC_MASK);
clk_ce = of_clk_get(timer, clksel);
if (IS_ERR(clk_ce)) {
diff --git a/drivers/cpuidle/Kconfig.arm b/drivers/cpuidle/Kconfig.arm
index 97ccc31dbdd8..5bb94780d377 100644
--- a/drivers/cpuidle/Kconfig.arm
+++ b/drivers/cpuidle/Kconfig.arm
@@ -1,6 +1,11 @@
#
# ARM CPU Idle drivers
#
+config ARM_ARMADA_370_XP_CPUIDLE
+ bool "CPU Idle Driver for Armada 370/XP family processors"
+ depends on ARCH_MVEBU
+ help
+ Select this to enable cpuidle on Armada 370/XP processors.
config ARM_BIG_LITTLE_CPUIDLE
bool "Support for ARM big.LITTLE processors"
diff --git a/drivers/cpuidle/Makefile b/drivers/cpuidle/Makefile
index f71ae1b373c5..9902d052bd87 100644
--- a/drivers/cpuidle/Makefile
+++ b/drivers/cpuidle/Makefile
@@ -7,6 +7,7 @@ obj-$(CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED) += coupled.o
##################################################################################
# ARM SoC drivers
+obj-$(CONFIG_ARM_ARMADA_370_XP_CPUIDLE) += cpuidle-armada-370-xp.o
obj-$(CONFIG_ARM_BIG_LITTLE_CPUIDLE) += cpuidle-big_little.o
obj-$(CONFIG_ARM_HIGHBANK_CPUIDLE) += cpuidle-calxeda.o
obj-$(CONFIG_ARM_KIRKWOOD_CPUIDLE) += cpuidle-kirkwood.o
diff --git a/drivers/cpuidle/cpuidle-armada-370-xp.c b/drivers/cpuidle/cpuidle-armada-370-xp.c
new file mode 100644
index 000000000000..28587d0f3947
--- /dev/null
+++ b/drivers/cpuidle/cpuidle-armada-370-xp.c
@@ -0,0 +1,93 @@
+/*
+ * Marvell Armada 370 and Armada XP SoC cpuidle driver
+ *
+ * Copyright (C) 2014 Marvell
+ *
+ * Nadav Haklai <nadavh@marvell.com>
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * Maintainer: Gregory CLEMENT <gregory.clement@free-electrons.com>
+ */
+
+#include <linux/cpu_pm.h>
+#include <linux/cpuidle.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/suspend.h>
+#include <linux/platform_device.h>
+#include <asm/cpuidle.h>
+
+#define ARMADA_370_XP_MAX_STATES 3
+#define ARMADA_370_XP_FLAG_DEEP_IDLE 0x10000
+
+static int (*armada_370_xp_cpu_suspend)(int);
+
+static int armada_370_xp_enter_idle(struct cpuidle_device *dev,
+ struct cpuidle_driver *drv,
+ int index)
+{
+ int ret;
+ bool deepidle = false;
+ cpu_pm_enter();
+
+ if (drv->states[index].flags & ARMADA_370_XP_FLAG_DEEP_IDLE)
+ deepidle = true;
+
+ ret = armada_370_xp_cpu_suspend(deepidle);
+ if (ret)
+ return ret;
+
+ cpu_pm_exit();
+
+ return index;
+}
+
+static struct cpuidle_driver armada_370_xp_idle_driver = {
+ .name = "armada_370_xp_idle",
+ .states[0] = ARM_CPUIDLE_WFI_STATE,
+ .states[1] = {
+ .enter = armada_370_xp_enter_idle,
+ .exit_latency = 10,
+ .power_usage = 50,
+ .target_residency = 100,
+ .flags = CPUIDLE_FLAG_TIME_VALID,
+ .name = "MV CPU IDLE",
+ .desc = "CPU power down",
+ },
+ .states[2] = {
+ .enter = armada_370_xp_enter_idle,
+ .exit_latency = 100,
+ .power_usage = 5,
+ .target_residency = 1000,
+ .flags = CPUIDLE_FLAG_TIME_VALID |
+ ARMADA_370_XP_FLAG_DEEP_IDLE,
+ .name = "MV CPU DEEP IDLE",
+ .desc = "CPU and L2 Fabric power down",
+ },
+ .state_count = ARMADA_370_XP_MAX_STATES,
+};
+
+static int armada_370_xp_cpuidle_probe(struct platform_device *pdev)
+{
+
+ armada_370_xp_cpu_suspend = (void *)(pdev->dev.platform_data);
+ return cpuidle_register(&armada_370_xp_idle_driver, NULL);
+}
+
+static struct platform_driver armada_370_xp_cpuidle_plat_driver = {
+ .driver = {
+ .name = "cpuidle-armada-370-xp",
+ .owner = THIS_MODULE,
+ },
+ .probe = armada_370_xp_cpuidle_probe,
+};
+
+module_platform_driver(armada_370_xp_cpuidle_plat_driver);
+
+MODULE_AUTHOR("Gregory CLEMENT <gregory.clement@free-electrons.com>");
+MODULE_DESCRIPTION("Armada 370/XP cpu idle driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/iio/adc/at91_adc.c b/drivers/iio/adc/at91_adc.c
index 89777ed9abd8..3b5bacd4d8da 100644
--- a/drivers/iio/adc/at91_adc.c
+++ b/drivers/iio/adc/at91_adc.c
@@ -31,7 +31,108 @@
#include <linux/iio/trigger_consumer.h>
#include <linux/iio/triggered_buffer.h>
-#include <mach/at91_adc.h>
+/* Registers */
+#define AT91_ADC_CR 0x00 /* Control Register */
+#define AT91_ADC_SWRST (1 << 0) /* Software Reset */
+#define AT91_ADC_START (1 << 1) /* Start Conversion */
+
+#define AT91_ADC_MR 0x04 /* Mode Register */
+#define AT91_ADC_TSAMOD (3 << 0) /* ADC mode */
+#define AT91_ADC_TSAMOD_ADC_ONLY_MODE (0 << 0) /* ADC Mode */
+#define AT91_ADC_TSAMOD_TS_ONLY_MODE (1 << 0) /* Touch Screen Only Mode */
+#define AT91_ADC_TRGEN (1 << 0) /* Trigger Enable */
+#define AT91_ADC_TRGSEL (7 << 1) /* Trigger Selection */
+#define AT91_ADC_TRGSEL_TC0 (0 << 1)
+#define AT91_ADC_TRGSEL_TC1 (1 << 1)
+#define AT91_ADC_TRGSEL_TC2 (2 << 1)
+#define AT91_ADC_TRGSEL_EXTERNAL (6 << 1)
+#define AT91_ADC_LOWRES (1 << 4) /* Low Resolution */
+#define AT91_ADC_SLEEP (1 << 5) /* Sleep Mode */
+#define AT91_ADC_PENDET (1 << 6) /* Pen contact detection enable */
+#define AT91_ADC_PRESCAL_9260 (0x3f << 8) /* Prescalar Rate Selection */
+#define AT91_ADC_PRESCAL_9G45 (0xff << 8)
+#define AT91_ADC_PRESCAL_(x) ((x) << 8)
+#define AT91_ADC_STARTUP_9260 (0x1f << 16) /* Startup Up Time */
+#define AT91_ADC_STARTUP_9G45 (0x7f << 16)
+#define AT91_ADC_STARTUP_9X5 (0xf << 16)
+#define AT91_ADC_STARTUP_(x) ((x) << 16)
+#define AT91_ADC_SHTIM (0xf << 24) /* Sample & Hold Time */
+#define AT91_ADC_SHTIM_(x) ((x) << 24)
+#define AT91_ADC_PENDBC (0x0f << 28) /* Pen Debounce time */
+#define AT91_ADC_PENDBC_(x) ((x) << 28)
+
+#define AT91_ADC_TSR 0x0C
+#define AT91_ADC_TSR_SHTIM (0xf << 24) /* Sample & Hold Time */
+#define AT91_ADC_TSR_SHTIM_(x) ((x) << 24)
+
+#define AT91_ADC_CHER 0x10 /* Channel Enable Register */
+#define AT91_ADC_CHDR 0x14 /* Channel Disable Register */
+#define AT91_ADC_CHSR 0x18 /* Channel Status Register */
+#define AT91_ADC_CH(n) (1 << (n)) /* Channel Number */
+
+#define AT91_ADC_SR 0x1C /* Status Register */
+#define AT91_ADC_EOC(n) (1 << (n)) /* End of Conversion on Channel N */
+#define AT91_ADC_OVRE(n) (1 << ((n) + 8))/* Overrun Error on Channel N */
+#define AT91_ADC_DRDY (1 << 16) /* Data Ready */
+#define AT91_ADC_GOVRE (1 << 17) /* General Overrun Error */
+#define AT91_ADC_ENDRX (1 << 18) /* End of RX Buffer */
+#define AT91_ADC_RXFUFF (1 << 19) /* RX Buffer Full */
+
+#define AT91_ADC_SR_9X5 0x30 /* Status Register for 9x5 */
+#define AT91_ADC_SR_DRDY_9X5 (1 << 24) /* Data Ready */
+
+#define AT91_ADC_LCDR 0x20 /* Last Converted Data Register */
+#define AT91_ADC_LDATA (0x3ff)
+
+#define AT91_ADC_IER 0x24 /* Interrupt Enable Register */
+#define AT91_ADC_IDR 0x28 /* Interrupt Disable Register */
+#define AT91_ADC_IMR 0x2C /* Interrupt Mask Register */
+#define AT91RL_ADC_IER_PEN (1 << 20)
+#define AT91RL_ADC_IER_NOPEN (1 << 21)
+#define AT91_ADC_IER_PEN (1 << 29)
+#define AT91_ADC_IER_NOPEN (1 << 30)
+#define AT91_ADC_IER_XRDY (1 << 20)
+#define AT91_ADC_IER_YRDY (1 << 21)
+#define AT91_ADC_IER_PRDY (1 << 22)
+#define AT91_ADC_ISR_PENS (1 << 31)
+
+#define AT91_ADC_CHR(n) (0x30 + ((n) * 4)) /* Channel Data Register N */
+#define AT91_ADC_DATA (0x3ff)
+
+#define AT91_ADC_CDR0_9X5 (0x50) /* Channel Data Register 0 for 9X5 */
+
+#define AT91_ADC_ACR 0x94 /* Analog Control Register */
+#define AT91_ADC_ACR_PENDETSENS (0x3 << 0) /* pull-up resistor */
+
+#define AT91_ADC_TSMR 0xB0
+#define AT91_ADC_TSMR_TSMODE (3 << 0) /* Touch Screen Mode */
+#define AT91_ADC_TSMR_TSMODE_NONE (0 << 0)
+#define AT91_ADC_TSMR_TSMODE_4WIRE_NO_PRESS (1 << 0)
+#define AT91_ADC_TSMR_TSMODE_4WIRE_PRESS (2 << 0)
+#define AT91_ADC_TSMR_TSMODE_5WIRE (3 << 0)
+#define AT91_ADC_TSMR_TSAV (3 << 4) /* Averages samples */
+#define AT91_ADC_TSMR_TSAV_(x) ((x) << 4)
+#define AT91_ADC_TSMR_SCTIM (0x0f << 16) /* Switch closure time */
+#define AT91_ADC_TSMR_PENDBC (0x0f << 28) /* Pen Debounce time */
+#define AT91_ADC_TSMR_PENDBC_(x) ((x) << 28)
+#define AT91_ADC_TSMR_NOTSDMA (1 << 22) /* No Touchscreen DMA */
+#define AT91_ADC_TSMR_PENDET_DIS (0 << 24) /* Pen contact detection disable */
+#define AT91_ADC_TSMR_PENDET_ENA (1 << 24) /* Pen contact detection enable */
+
+#define AT91_ADC_TSXPOSR 0xB4
+#define AT91_ADC_TSYPOSR 0xB8
+#define AT91_ADC_TSPRESSR 0xBC
+
+#define AT91_ADC_TRGR_9260 AT91_ADC_MR
+#define AT91_ADC_TRGR_9G45 0x08
+#define AT91_ADC_TRGR_9X5 0xC0
+
+/* Trigger Register bit field */
+#define AT91_ADC_TRGR_TRGPER (0xffff << 16)
+#define AT91_ADC_TRGR_TRGPER_(x) ((x) << 16)
+#define AT91_ADC_TRGR_TRGMOD (0x7 << 0)
+#define AT91_ADC_TRGR_NONE (0 << 0)
+#define AT91_ADC_TRGR_MOD_PERIOD_TRIG (5 << 0)
#define AT91_ADC_CHAN(st, ch) \
(st->registers->channel_base + (ch * 4))
@@ -46,6 +147,29 @@
#define TOUCH_SAMPLE_PERIOD_US 2000 /* 2ms */
#define TOUCH_PEN_DETECT_DEBOUNCE_US 200
+#define MAX_RLPOS_BITS 10
+#define TOUCH_SAMPLE_PERIOD_US_RL 10000 /* 10ms, the SoC can't keep up with 2ms */
+#define TOUCH_SHTIM 0xa
+
+/**
+ * struct at91_adc_reg_desc - Various informations relative to registers
+ * @channel_base: Base offset for the channel data registers
+ * @drdy_mask: Mask of the DRDY field in the relevant registers
+ (Interruptions registers mostly)
+ * @status_register: Offset of the Interrupt Status Register
+ * @trigger_register: Offset of the Trigger setup register
+ * @mr_prescal_mask: Mask of the PRESCAL field in the adc MR register
+ * @mr_startup_mask: Mask of the STARTUP field in the adc MR register
+ */
+struct at91_adc_reg_desc {
+ u8 channel_base;
+ u32 drdy_mask;
+ u8 status_register;
+ u8 trigger_register;
+ u32 mr_prescal_mask;
+ u32 mr_startup_mask;
+};
+
struct at91_adc_caps {
bool has_ts; /* Support touch screen */
bool has_tsmr; /* only at91sam9x5, sama5d3 have TSMR reg */
@@ -64,12 +188,6 @@ struct at91_adc_caps {
struct at91_adc_reg_desc registers;
};
-enum atmel_adc_ts_type {
- ATMEL_ADC_TOUCHSCREEN_NONE = 0,
- ATMEL_ADC_TOUCHSCREEN_4WIRE = 4,
- ATMEL_ADC_TOUCHSCREEN_5WIRE = 5,
-};
-
struct at91_adc_state {
struct clk *adc_clk;
u16 *buffer;
@@ -114,6 +232,11 @@ struct at91_adc_state {
u16 ts_sample_period_val;
u32 ts_pressure_threshold;
+ u16 ts_pendbc;
+
+ bool ts_bufferedmeasure;
+ u32 ts_prev_absx;
+ u32 ts_prev_absy;
};
static irqreturn_t at91_adc_trigger_handler(int irq, void *p)
@@ -220,7 +343,72 @@ static int at91_ts_sample(struct at91_adc_state *st)
return 0;
}
-static irqreturn_t at91_adc_interrupt(int irq, void *private)
+static irqreturn_t at91_adc_rl_interrupt(int irq, void *private)
+{
+ struct iio_dev *idev = private;
+ struct at91_adc_state *st = iio_priv(idev);
+ u32 status = at91_adc_readl(st, st->registers->status_register);
+ unsigned int reg;
+
+ status &= at91_adc_readl(st, AT91_ADC_IMR);
+ if (status & st->registers->drdy_mask)
+ handle_adc_eoc_trigger(irq, idev);
+
+ if (status & AT91RL_ADC_IER_PEN) {
+ /* Disabling pen debounce is required to get a NOPEN irq */
+ reg = at91_adc_readl(st, AT91_ADC_MR);
+ reg &= ~AT91_ADC_PENDBC;
+ at91_adc_writel(st, AT91_ADC_MR, reg);
+
+ at91_adc_writel(st, AT91_ADC_IDR, AT91RL_ADC_IER_PEN);
+ at91_adc_writel(st, AT91_ADC_IER, AT91RL_ADC_IER_NOPEN
+ | AT91_ADC_EOC(3));
+ /* Set up period trigger for sampling */
+ at91_adc_writel(st, st->registers->trigger_register,
+ AT91_ADC_TRGR_MOD_PERIOD_TRIG |
+ AT91_ADC_TRGR_TRGPER_(st->ts_sample_period_val));
+ } else if (status & AT91RL_ADC_IER_NOPEN) {
+ reg = at91_adc_readl(st, AT91_ADC_MR);
+ reg |= AT91_ADC_PENDBC_(st->ts_pendbc) & AT91_ADC_PENDBC;
+ at91_adc_writel(st, AT91_ADC_MR, reg);
+ at91_adc_writel(st, st->registers->trigger_register,
+ AT91_ADC_TRGR_NONE);
+
+ at91_adc_writel(st, AT91_ADC_IDR, AT91RL_ADC_IER_NOPEN
+ | AT91_ADC_EOC(3));
+ at91_adc_writel(st, AT91_ADC_IER, AT91RL_ADC_IER_PEN);
+ st->ts_bufferedmeasure = false;
+ input_report_key(st->ts_input, BTN_TOUCH, 0);
+ input_sync(st->ts_input);
+ } else if (status & AT91_ADC_EOC(3)) {
+ /* Conversion finished */
+ if (st->ts_bufferedmeasure) {
+ /*
+ * Last measurement is always discarded, since it can
+ * be erroneous.
+ * Always report previous measurement
+ */
+ input_report_abs(st->ts_input, ABS_X, st->ts_prev_absx);
+ input_report_abs(st->ts_input, ABS_Y, st->ts_prev_absy);
+ input_report_key(st->ts_input, BTN_TOUCH, 1);
+ input_sync(st->ts_input);
+ } else
+ st->ts_bufferedmeasure = true;
+
+ /* Now make new measurement */
+ st->ts_prev_absx = at91_adc_readl(st, AT91_ADC_CHAN(st, 3))
+ << MAX_RLPOS_BITS;
+ st->ts_prev_absx /= at91_adc_readl(st, AT91_ADC_CHAN(st, 2));
+
+ st->ts_prev_absy = at91_adc_readl(st, AT91_ADC_CHAN(st, 1))
+ << MAX_RLPOS_BITS;
+ st->ts_prev_absy /= at91_adc_readl(st, AT91_ADC_CHAN(st, 0));
+ }
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t at91_adc_9x5_interrupt(int irq, void *private)
{
struct iio_dev *idev = private;
struct at91_adc_state *st = iio_priv(idev);
@@ -653,6 +841,8 @@ static int at91_adc_probe_dt_ts(struct device_node *node,
return -EINVAL;
}
+ if (!st->caps->has_tsmr)
+ return 0;
prop = 0;
of_property_read_u32(node, "atmel,adc-ts-pressure-threshold", &prop);
st->ts_pressure_threshold = prop;
@@ -776,6 +966,7 @@ static int at91_adc_probe_pdata(struct at91_adc_state *st,
st->trigger_number = pdata->trigger_number;
st->trigger_list = pdata->trigger_list;
st->registers = &st->caps->registers;
+ st->touchscreen_type = pdata->touchscreen_type;
return 0;
}
@@ -790,7 +981,10 @@ static int atmel_ts_open(struct input_dev *dev)
{
struct at91_adc_state *st = input_get_drvdata(dev);
- at91_adc_writel(st, AT91_ADC_IER, AT91_ADC_IER_PEN);
+ if (st->caps->has_tsmr)
+ at91_adc_writel(st, AT91_ADC_IER, AT91_ADC_IER_PEN);
+ else
+ at91_adc_writel(st, AT91_ADC_IER, AT91RL_ADC_IER_PEN);
return 0;
}
@@ -798,45 +992,61 @@ static void atmel_ts_close(struct input_dev *dev)
{
struct at91_adc_state *st = input_get_drvdata(dev);
- at91_adc_writel(st, AT91_ADC_IDR, AT91_ADC_IER_PEN);
+ if (st->caps->has_tsmr)
+ at91_adc_writel(st, AT91_ADC_IDR, AT91_ADC_IER_PEN);
+ else
+ at91_adc_writel(st, AT91_ADC_IDR, AT91RL_ADC_IER_PEN);
}
static int at91_ts_hw_init(struct at91_adc_state *st, u32 adc_clk_khz)
{
- u32 reg = 0, pendbc;
+ u32 reg = 0;
int i = 0;
- if (st->touchscreen_type == ATMEL_ADC_TOUCHSCREEN_4WIRE)
- reg = AT91_ADC_TSMR_TSMODE_4WIRE_PRESS;
- else
- reg = AT91_ADC_TSMR_TSMODE_5WIRE;
-
/* a Pen Detect Debounce Time is necessary for the ADC Touch to avoid
* pen detect noise.
* The formula is : Pen Detect Debounce Time = (2 ^ pendbc) / ADCClock
*/
- pendbc = round_up(TOUCH_PEN_DETECT_DEBOUNCE_US * adc_clk_khz / 1000, 1);
+ st->ts_pendbc = round_up(TOUCH_PEN_DETECT_DEBOUNCE_US * adc_clk_khz /
+ 1000, 1);
- while (pendbc >> ++i)
+ while (st->ts_pendbc >> ++i)
; /* Empty! Find the shift offset */
- if (abs(pendbc - (1 << i)) < abs(pendbc - (1 << (i - 1))))
- pendbc = i;
+ if (abs(st->ts_pendbc - (1 << i)) < abs(st->ts_pendbc - (1 << (i - 1))))
+ st->ts_pendbc = i;
else
- pendbc = i - 1;
+ st->ts_pendbc = i - 1;
- if (st->caps->has_tsmr) {
- reg |= AT91_ADC_TSMR_TSAV_(st->caps->ts_filter_average)
- & AT91_ADC_TSMR_TSAV;
- reg |= AT91_ADC_TSMR_PENDBC_(pendbc) & AT91_ADC_TSMR_PENDBC;
- reg |= AT91_ADC_TSMR_NOTSDMA;
- reg |= AT91_ADC_TSMR_PENDET_ENA;
- reg |= 0x03 << 8; /* TSFREQ, need bigger than TSAV */
-
- at91_adc_writel(st, AT91_ADC_TSMR, reg);
- } else {
- /* TODO: for 9g45 which has no TSMR */
+ if (!st->caps->has_tsmr) {
+ reg = at91_adc_readl(st, AT91_ADC_MR);
+ reg |= AT91_ADC_TSAMOD_TS_ONLY_MODE | AT91_ADC_PENDET;
+
+ reg |= AT91_ADC_PENDBC_(st->ts_pendbc) & AT91_ADC_PENDBC;
+ at91_adc_writel(st, AT91_ADC_MR, reg);
+
+ reg = AT91_ADC_TSR_SHTIM_(TOUCH_SHTIM) & AT91_ADC_TSR_SHTIM;
+ at91_adc_writel(st, AT91_ADC_TSR, reg);
+
+ st->ts_sample_period_val = round_up((TOUCH_SAMPLE_PERIOD_US_RL *
+ adc_clk_khz / 1000) - 1, 1);
+
+ return 0;
}
+ if (st->touchscreen_type == ATMEL_ADC_TOUCHSCREEN_4WIRE)
+ reg = AT91_ADC_TSMR_TSMODE_4WIRE_PRESS;
+ else
+ reg = AT91_ADC_TSMR_TSMODE_5WIRE;
+
+ reg |= AT91_ADC_TSMR_TSAV_(st->caps->ts_filter_average)
+ & AT91_ADC_TSMR_TSAV;
+ reg |= AT91_ADC_TSMR_PENDBC_(st->ts_pendbc) & AT91_ADC_TSMR_PENDBC;
+ reg |= AT91_ADC_TSMR_NOTSDMA;
+ reg |= AT91_ADC_TSMR_PENDET_ENA;
+ reg |= 0x03 << 8; /* TSFREQ, needs to be bigger than TSAV */
+
+ at91_adc_writel(st, AT91_ADC_TSMR, reg);
+
/* Change adc internal resistor value for better pen detection,
* default value is 100 kOhm.
* 0 = 200 kOhm, 1 = 150 kOhm, 2 = 100 kOhm, 3 = 50 kOhm
@@ -845,7 +1055,7 @@ static int at91_ts_hw_init(struct at91_adc_state *st, u32 adc_clk_khz)
at91_adc_writel(st, AT91_ADC_ACR, st->caps->ts_pen_detect_sensitivity
& AT91_ADC_ACR_PENDETSENS);
- /* Sample Peroid Time = (TRGPER + 1) / ADCClock */
+ /* Sample Period Time = (TRGPER + 1) / ADCClock */
st->ts_sample_period_val = round_up((TOUCH_SAMPLE_PERIOD_US *
adc_clk_khz / 1000) - 1, 1);
@@ -874,18 +1084,38 @@ static int at91_ts_register(struct at91_adc_state *st,
__set_bit(EV_ABS, input->evbit);
__set_bit(EV_KEY, input->evbit);
__set_bit(BTN_TOUCH, input->keybit);
- input_set_abs_params(input, ABS_X, 0, (1 << MAX_POS_BITS) - 1, 0, 0);
- input_set_abs_params(input, ABS_Y, 0, (1 << MAX_POS_BITS) - 1, 0, 0);
- input_set_abs_params(input, ABS_PRESSURE, 0, 0xffffff, 0, 0);
+ if (st->caps->has_tsmr) {
+ input_set_abs_params(input, ABS_X, 0, (1 << MAX_POS_BITS) - 1,
+ 0, 0);
+ input_set_abs_params(input, ABS_Y, 0, (1 << MAX_POS_BITS) - 1,
+ 0, 0);
+ input_set_abs_params(input, ABS_PRESSURE, 0, 0xffffff, 0, 0);
+ } else {
+ if (st->touchscreen_type != ATMEL_ADC_TOUCHSCREEN_4WIRE) {
+ dev_err(&pdev->dev,
+ "This touchscreen controller only support 4 wires\n");
+ ret = -EINVAL;
+ goto err;
+ }
+
+ input_set_abs_params(input, ABS_X, 0, (1 << MAX_RLPOS_BITS) - 1,
+ 0, 0);
+ input_set_abs_params(input, ABS_Y, 0, (1 << MAX_RLPOS_BITS) - 1,
+ 0, 0);
+ }
st->ts_input = input;
input_set_drvdata(input, st);
ret = input_register_device(input);
if (ret)
- input_free_device(st->ts_input);
+ goto err;
return ret;
+
+err:
+ input_free_device(st->ts_input);
+ return ret;
}
static void at91_ts_unregister(struct at91_adc_state *st)
@@ -943,11 +1173,13 @@ static int at91_adc_probe(struct platform_device *pdev)
*/
at91_adc_writel(st, AT91_ADC_CR, AT91_ADC_SWRST);
at91_adc_writel(st, AT91_ADC_IDR, 0xFFFFFFFF);
- ret = request_irq(st->irq,
- at91_adc_interrupt,
- 0,
- pdev->dev.driver->name,
- idev);
+
+ if (st->caps->has_tsmr)
+ ret = request_irq(st->irq, at91_adc_9x5_interrupt, 0,
+ pdev->dev.driver->name, idev);
+ else
+ ret = request_irq(st->irq, at91_adc_rl_interrupt, 0,
+ pdev->dev.driver->name, idev);
if (ret) {
dev_err(&pdev->dev, "Failed to allocate IRQ.\n");
return ret;
@@ -1051,12 +1283,6 @@ static int at91_adc_probe(struct platform_device *pdev)
goto error_disable_adc_clk;
}
} else {
- if (!st->caps->has_tsmr) {
- dev_err(&pdev->dev, "We don't support non-TSMR adc\n");
- ret = -ENODEV;
- goto error_disable_adc_clk;
- }
-
ret = at91_ts_register(st, pdev);
if (ret)
goto error_disable_adc_clk;
@@ -1120,6 +1346,20 @@ static struct at91_adc_caps at91sam9260_caps = {
},
};
+static struct at91_adc_caps at91sam9rl_caps = {
+ .has_ts = true,
+ .calc_startup_ticks = calc_startup_ticks_9260, /* same as 9260 */
+ .num_channels = 6,
+ .registers = {
+ .channel_base = AT91_ADC_CHR(0),
+ .drdy_mask = AT91_ADC_DRDY,
+ .status_register = AT91_ADC_SR,
+ .trigger_register = AT91_ADC_TRGR_9G45,
+ .mr_prescal_mask = AT91_ADC_PRESCAL_9260,
+ .mr_startup_mask = AT91_ADC_STARTUP_9G45,
+ },
+};
+
static struct at91_adc_caps at91sam9g45_caps = {
.has_ts = true,
.calc_startup_ticks = calc_startup_ticks_9260, /* same as 9260 */
@@ -1154,6 +1394,7 @@ static struct at91_adc_caps at91sam9x5_caps = {
static const struct of_device_id at91_adc_dt_ids[] = {
{ .compatible = "atmel,at91sam9260-adc", .data = &at91sam9260_caps },
+ { .compatible = "atmel,at91sam9rl-adc", .data = &at91sam9rl_caps },
{ .compatible = "atmel,at91sam9g45-adc", .data = &at91sam9g45_caps },
{ .compatible = "atmel,at91sam9x5-adc", .data = &at91sam9x5_caps },
{},
@@ -1165,6 +1406,9 @@ static const struct platform_device_id at91_adc_ids[] = {
.name = "at91sam9260-adc",
.driver_data = (unsigned long)&at91sam9260_caps,
}, {
+ .name = "at91sam9rl-adc",
+ .driver_data = (unsigned long)&at91sam9rl_caps,
+ }, {
.name = "at91sam9g45-adc",
.driver_data = (unsigned long)&at91sam9g45_caps,
}, {
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index b845e9370871..d4e5ab57909f 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -550,18 +550,6 @@ config TOUCHSCREEN_TI_AM335X_TSC
To compile this driver as a module, choose M here: the
module will be called ti_am335x_tsc.
-config TOUCHSCREEN_ATMEL_TSADCC
- tristate "Atmel Touchscreen Interface"
- depends on ARCH_AT91
- help
- Say Y here if you have a 4-wire touchscreen connected to the
- ADC Controller on your Atmel SoC.
-
- If unsure, say N.
-
- To compile this driver as a module, choose M here: the
- module will be called atmel_tsadcc.
-
config TOUCHSCREEN_UCB1400
tristate "Philips UCB1400 touchscreen"
depends on AC97_BUS
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
index 4bc954b7c7c3..03f12a1f2218 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -13,7 +13,6 @@ obj-$(CONFIG_TOUCHSCREEN_AD7879_I2C) += ad7879-i2c.o
obj-$(CONFIG_TOUCHSCREEN_AD7879_SPI) += ad7879-spi.o
obj-$(CONFIG_TOUCHSCREEN_ADS7846) += ads7846.o
obj-$(CONFIG_TOUCHSCREEN_ATMEL_MXT) += atmel_mxt_ts.o
-obj-$(CONFIG_TOUCHSCREEN_ATMEL_TSADCC) += atmel_tsadcc.o
obj-$(CONFIG_TOUCHSCREEN_AUO_PIXCIR) += auo-pixcir-ts.o
obj-$(CONFIG_TOUCHSCREEN_BU21013) += bu21013_ts.o
obj-$(CONFIG_TOUCHSCREEN_CY8CTMG110) += cy8ctmg110_ts.o
diff --git a/drivers/input/touchscreen/atmel_tsadcc.c b/drivers/input/touchscreen/atmel_tsadcc.c
deleted file mode 100644
index a7c9d6967d1e..000000000000
--- a/drivers/input/touchscreen/atmel_tsadcc.c
+++ /dev/null
@@ -1,358 +0,0 @@
-/*
- * Atmel Touch Screen Driver
- *
- * Copyright (c) 2008 ATMEL
- * Copyright (c) 2008 Dan Liang
- * Copyright (c) 2008 TimeSys Corporation
- * Copyright (c) 2008 Justin Waters
- *
- * Based on touchscreen code from Atmel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/err.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/input.h>
-#include <linux/slab.h>
-#include <linux/interrupt.h>
-#include <linux/clk.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/platform_data/atmel.h>
-#include <mach/cpu.h>
-
-/* Register definitions based on AT91SAM9RL64 preliminary draft datasheet */
-
-#define ATMEL_TSADCC_CR 0x00 /* Control register */
-#define ATMEL_TSADCC_SWRST (1 << 0) /* Software Reset*/
-#define ATMEL_TSADCC_START (1 << 1) /* Start conversion */
-
-#define ATMEL_TSADCC_MR 0x04 /* Mode register */
-#define ATMEL_TSADCC_TSAMOD (3 << 0) /* ADC mode */
-#define ATMEL_TSADCC_TSAMOD_ADC_ONLY_MODE (0x0) /* ADC Mode */
-#define ATMEL_TSADCC_TSAMOD_TS_ONLY_MODE (0x1) /* Touch Screen Only Mode */
-#define ATMEL_TSADCC_LOWRES (1 << 4) /* Resolution selection */
-#define ATMEL_TSADCC_SLEEP (1 << 5) /* Sleep mode */
-#define ATMEL_TSADCC_PENDET (1 << 6) /* Pen Detect selection */
-#define ATMEL_TSADCC_PRES (1 << 7) /* Pressure Measurement Selection */
-#define ATMEL_TSADCC_PRESCAL (0x3f << 8) /* Prescalar Rate Selection */
-#define ATMEL_TSADCC_EPRESCAL (0xff << 8) /* Prescalar Rate Selection (Extended) */
-#define ATMEL_TSADCC_STARTUP (0x7f << 16) /* Start Up time */
-#define ATMEL_TSADCC_SHTIM (0xf << 24) /* Sample & Hold time */
-#define ATMEL_TSADCC_PENDBC (0xf << 28) /* Pen Detect debouncing time */
-
-#define ATMEL_TSADCC_TRGR 0x08 /* Trigger register */
-#define ATMEL_TSADCC_TRGMOD (7 << 0) /* Trigger mode */
-#define ATMEL_TSADCC_TRGMOD_NONE (0 << 0)
-#define ATMEL_TSADCC_TRGMOD_EXT_RISING (1 << 0)
-#define ATMEL_TSADCC_TRGMOD_EXT_FALLING (2 << 0)
-#define ATMEL_TSADCC_TRGMOD_EXT_ANY (3 << 0)
-#define ATMEL_TSADCC_TRGMOD_PENDET (4 << 0)
-#define ATMEL_TSADCC_TRGMOD_PERIOD (5 << 0)
-#define ATMEL_TSADCC_TRGMOD_CONTINUOUS (6 << 0)
-#define ATMEL_TSADCC_TRGPER (0xffff << 16) /* Trigger period */
-
-#define ATMEL_TSADCC_TSR 0x0C /* Touch Screen register */
-#define ATMEL_TSADCC_TSFREQ (0xf << 0) /* TS Frequency in Interleaved mode */
-#define ATMEL_TSADCC_TSSHTIM (0xf << 24) /* Sample & Hold time */
-
-#define ATMEL_TSADCC_CHER 0x10 /* Channel Enable register */
-#define ATMEL_TSADCC_CHDR 0x14 /* Channel Disable register */
-#define ATMEL_TSADCC_CHSR 0x18 /* Channel Status register */
-#define ATMEL_TSADCC_CH(n) (1 << (n)) /* Channel number */
-
-#define ATMEL_TSADCC_SR 0x1C /* Status register */
-#define ATMEL_TSADCC_EOC(n) (1 << ((n)+0)) /* End of conversion for channel N */
-#define ATMEL_TSADCC_OVRE(n) (1 << ((n)+8)) /* Overrun error for channel N */
-#define ATMEL_TSADCC_DRDY (1 << 16) /* Data Ready */
-#define ATMEL_TSADCC_GOVRE (1 << 17) /* General Overrun Error */
-#define ATMEL_TSADCC_ENDRX (1 << 18) /* End of RX Buffer */
-#define ATMEL_TSADCC_RXBUFF (1 << 19) /* TX Buffer full */
-#define ATMEL_TSADCC_PENCNT (1 << 20) /* Pen contact */
-#define ATMEL_TSADCC_NOCNT (1 << 21) /* No contact */
-
-#define ATMEL_TSADCC_LCDR 0x20 /* Last Converted Data register */
-#define ATMEL_TSADCC_DATA (0x3ff << 0) /* Channel data */
-
-#define ATMEL_TSADCC_IER 0x24 /* Interrupt Enable register */
-#define ATMEL_TSADCC_IDR 0x28 /* Interrupt Disable register */
-#define ATMEL_TSADCC_IMR 0x2C /* Interrupt Mask register */
-#define ATMEL_TSADCC_CDR0 0x30 /* Channel Data 0 */
-#define ATMEL_TSADCC_CDR1 0x34 /* Channel Data 1 */
-#define ATMEL_TSADCC_CDR2 0x38 /* Channel Data 2 */
-#define ATMEL_TSADCC_CDR3 0x3C /* Channel Data 3 */
-#define ATMEL_TSADCC_CDR4 0x40 /* Channel Data 4 */
-#define ATMEL_TSADCC_CDR5 0x44 /* Channel Data 5 */
-
-#define ATMEL_TSADCC_XPOS 0x50
-#define ATMEL_TSADCC_Z1DAT 0x54
-#define ATMEL_TSADCC_Z2DAT 0x58
-
-#define PRESCALER_VAL(x) ((x) >> 8)
-
-#define ADC_DEFAULT_CLOCK 100000
-
-struct atmel_tsadcc {
- struct input_dev *input;
- char phys[32];
- struct clk *clk;
- int irq;
- unsigned int prev_absx;
- unsigned int prev_absy;
- unsigned char bufferedmeasure;
-};
-
-static void __iomem *tsc_base;
-
-#define atmel_tsadcc_read(reg) __raw_readl(tsc_base + (reg))
-#define atmel_tsadcc_write(reg, val) __raw_writel((val), tsc_base + (reg))
-
-static irqreturn_t atmel_tsadcc_interrupt(int irq, void *dev)
-{
- struct atmel_tsadcc *ts_dev = (struct atmel_tsadcc *)dev;
- struct input_dev *input_dev = ts_dev->input;
-
- unsigned int status;
- unsigned int reg;
-
- status = atmel_tsadcc_read(ATMEL_TSADCC_SR);
- status &= atmel_tsadcc_read(ATMEL_TSADCC_IMR);
-
- if (status & ATMEL_TSADCC_NOCNT) {
- /* Contact lost */
- reg = atmel_tsadcc_read(ATMEL_TSADCC_MR) | ATMEL_TSADCC_PENDBC;
-
- atmel_tsadcc_write(ATMEL_TSADCC_MR, reg);
- atmel_tsadcc_write(ATMEL_TSADCC_TRGR, ATMEL_TSADCC_TRGMOD_NONE);
- atmel_tsadcc_write(ATMEL_TSADCC_IDR,
- ATMEL_TSADCC_EOC(3) | ATMEL_TSADCC_NOCNT);
- atmel_tsadcc_write(ATMEL_TSADCC_IER, ATMEL_TSADCC_PENCNT);
-
- input_report_key(input_dev, BTN_TOUCH, 0);
- ts_dev->bufferedmeasure = 0;
- input_sync(input_dev);
-
- } else if (status & ATMEL_TSADCC_PENCNT) {
- /* Pen detected */
- reg = atmel_tsadcc_read(ATMEL_TSADCC_MR);
- reg &= ~ATMEL_TSADCC_PENDBC;
-
- atmel_tsadcc_write(ATMEL_TSADCC_IDR, ATMEL_TSADCC_PENCNT);
- atmel_tsadcc_write(ATMEL_TSADCC_MR, reg);
- atmel_tsadcc_write(ATMEL_TSADCC_IER,
- ATMEL_TSADCC_EOC(3) | ATMEL_TSADCC_NOCNT);
- atmel_tsadcc_write(ATMEL_TSADCC_TRGR,
- ATMEL_TSADCC_TRGMOD_PERIOD | (0x0FFF << 16));
-
- } else if (status & ATMEL_TSADCC_EOC(3)) {
- /* Conversion finished */
-
- if (ts_dev->bufferedmeasure) {
- /* Last measurement is always discarded, since it can
- * be erroneous.
- * Always report previous measurement */
- input_report_abs(input_dev, ABS_X, ts_dev->prev_absx);
- input_report_abs(input_dev, ABS_Y, ts_dev->prev_absy);
- input_report_key(input_dev, BTN_TOUCH, 1);
- input_sync(input_dev);
- } else
- ts_dev->bufferedmeasure = 1;
-
- /* Now make new measurement */
- ts_dev->prev_absx = atmel_tsadcc_read(ATMEL_TSADCC_CDR3) << 10;
- ts_dev->prev_absx /= atmel_tsadcc_read(ATMEL_TSADCC_CDR2);
-
- ts_dev->prev_absy = atmel_tsadcc_read(ATMEL_TSADCC_CDR1) << 10;
- ts_dev->prev_absy /= atmel_tsadcc_read(ATMEL_TSADCC_CDR0);
- }
-
- return IRQ_HANDLED;
-}
-
-/*
- * The functions for inserting/removing us as a module.
- */
-
-static int atmel_tsadcc_probe(struct platform_device *pdev)
-{
- struct atmel_tsadcc *ts_dev;
- struct input_dev *input_dev;
- struct resource *res;
- struct at91_tsadcc_data *pdata = dev_get_platdata(&pdev->dev);
- int err;
- unsigned int prsc;
- unsigned int reg;
-
- if (!pdata)
- return -EINVAL;
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res) {
- dev_err(&pdev->dev, "no mmio resource defined.\n");
- return -ENXIO;
- }
-
- /* Allocate memory for device */
- ts_dev = kzalloc(sizeof(struct atmel_tsadcc), GFP_KERNEL);
- if (!ts_dev) {
- dev_err(&pdev->dev, "failed to allocate memory.\n");
- return -ENOMEM;
- }
- platform_set_drvdata(pdev, ts_dev);
-
- input_dev = input_allocate_device();
- if (!input_dev) {
- dev_err(&pdev->dev, "failed to allocate input device.\n");
- err = -EBUSY;
- goto err_free_mem;
- }
-
- ts_dev->irq = platform_get_irq(pdev, 0);
- if (ts_dev->irq < 0) {
- dev_err(&pdev->dev, "no irq ID is designated.\n");
- err = -ENODEV;
- goto err_free_dev;
- }
-
- if (!request_mem_region(res->start, resource_size(res),
- "atmel tsadcc regs")) {
- dev_err(&pdev->dev, "resources is unavailable.\n");
- err = -EBUSY;
- goto err_free_dev;
- }
-
- tsc_base = ioremap(res->start, resource_size(res));
- if (!tsc_base) {
- dev_err(&pdev->dev, "failed to map registers.\n");
- err = -ENOMEM;
- goto err_release_mem;
- }
-
- err = request_irq(ts_dev->irq, atmel_tsadcc_interrupt, 0,
- pdev->dev.driver->name, ts_dev);
- if (err) {
- dev_err(&pdev->dev, "failed to allocate irq.\n");
- goto err_unmap_regs;
- }
-
- ts_dev->clk = clk_get(&pdev->dev, "tsc_clk");
- if (IS_ERR(ts_dev->clk)) {
- dev_err(&pdev->dev, "failed to get ts_clk\n");
- err = PTR_ERR(ts_dev->clk);
- goto err_free_irq;
- }
-
- ts_dev->input = input_dev;
- ts_dev->bufferedmeasure = 0;
-
- snprintf(ts_dev->phys, sizeof(ts_dev->phys),
- "%s/input0", dev_name(&pdev->dev));
-
- input_dev->name = "atmel touch screen controller";
- input_dev->phys = ts_dev->phys;
- input_dev->dev.parent = &pdev->dev;
-
- __set_bit(EV_ABS, input_dev->evbit);
- input_set_abs_params(input_dev, ABS_X, 0, 0x3FF, 0, 0);
- input_set_abs_params(input_dev, ABS_Y, 0, 0x3FF, 0, 0);
-
- input_set_capability(input_dev, EV_KEY, BTN_TOUCH);
-
- /* clk_enable() always returns 0, no need to check it */
- clk_enable(ts_dev->clk);
-
- prsc = clk_get_rate(ts_dev->clk);
- dev_info(&pdev->dev, "Master clock is set at: %d Hz\n", prsc);
-
- if (!pdata->adc_clock)
- pdata->adc_clock = ADC_DEFAULT_CLOCK;
-
- prsc = (prsc / (2 * pdata->adc_clock)) - 1;
-
- /* saturate if this value is too high */
- if (cpu_is_at91sam9rl()) {
- if (prsc > PRESCALER_VAL(ATMEL_TSADCC_PRESCAL))
- prsc = PRESCALER_VAL(ATMEL_TSADCC_PRESCAL);
- } else {
- if (prsc > PRESCALER_VAL(ATMEL_TSADCC_EPRESCAL))
- prsc = PRESCALER_VAL(ATMEL_TSADCC_EPRESCAL);
- }
-
- dev_info(&pdev->dev, "Prescaler is set at: %d\n", prsc);
-
- reg = ATMEL_TSADCC_TSAMOD_TS_ONLY_MODE |
- ((0x00 << 5) & ATMEL_TSADCC_SLEEP) | /* Normal Mode */
- ((0x01 << 6) & ATMEL_TSADCC_PENDET) | /* Enable Pen Detect */
- (prsc << 8) |
- ((0x26 << 16) & ATMEL_TSADCC_STARTUP) |
- ((pdata->pendet_debounce << 28) & ATMEL_TSADCC_PENDBC);
-
- atmel_tsadcc_write(ATMEL_TSADCC_CR, ATMEL_TSADCC_SWRST);
- atmel_tsadcc_write(ATMEL_TSADCC_MR, reg);
- atmel_tsadcc_write(ATMEL_TSADCC_TRGR, ATMEL_TSADCC_TRGMOD_NONE);
- atmel_tsadcc_write(ATMEL_TSADCC_TSR,
- (pdata->ts_sample_hold_time << 24) & ATMEL_TSADCC_TSSHTIM);
-
- atmel_tsadcc_read(ATMEL_TSADCC_SR);
- atmel_tsadcc_write(ATMEL_TSADCC_IER, ATMEL_TSADCC_PENCNT);
-
- /* All went ok, so register to the input system */
- err = input_register_device(input_dev);
- if (err)
- goto err_fail;
-
- return 0;
-
-err_fail:
- clk_disable(ts_dev->clk);
- clk_put(ts_dev->clk);
-err_free_irq:
- free_irq(ts_dev->irq, ts_dev);
-err_unmap_regs:
- iounmap(tsc_base);
-err_release_mem:
- release_mem_region(res->start, resource_size(res));
-err_free_dev:
- input_free_device(input_dev);
-err_free_mem:
- kfree(ts_dev);
- return err;
-}
-
-static int atmel_tsadcc_remove(struct platform_device *pdev)
-{
- struct atmel_tsadcc *ts_dev = platform_get_drvdata(pdev);
- struct resource *res;
-
- free_irq(ts_dev->irq, ts_dev);
-
- input_unregister_device(ts_dev->input);
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- iounmap(tsc_base);
- release_mem_region(res->start, resource_size(res));
-
- clk_disable(ts_dev->clk);
- clk_put(ts_dev->clk);
-
- kfree(ts_dev);
-
- return 0;
-}
-
-static struct platform_driver atmel_tsadcc_driver = {
- .probe = atmel_tsadcc_probe,
- .remove = atmel_tsadcc_remove,
- .driver = {
- .name = "atmel_tsadcc",
- },
-};
-module_platform_driver(atmel_tsadcc_driver);
-
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("Atmel TouchScreen Driver");
-MODULE_AUTHOR("Dan Liang <dan.liang@atmel.com>");
-
diff --git a/drivers/irqchip/irq-armada-370-xp.c b/drivers/irqchip/irq-armada-370-xp.c
index 3899ba7821c5..c887e6eebc41 100644
--- a/drivers/irqchip/irq-armada-370-xp.c
+++ b/drivers/irqchip/irq-armada-370-xp.c
@@ -19,6 +19,7 @@
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/irqchip/chained_irq.h>
+#include <linux/cpu.h>
#include <linux/io.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
@@ -310,7 +311,8 @@ static int armada_370_xp_mpic_irq_map(struct irq_domain *h,
}
#ifdef CONFIG_SMP
-void armada_mpic_send_doorbell(const struct cpumask *mask, unsigned int irq)
+static void armada_mpic_send_doorbell(const struct cpumask *mask,
+ unsigned int irq)
{
int cpu;
unsigned long map = 0;
@@ -330,7 +332,7 @@ void armada_mpic_send_doorbell(const struct cpumask *mask, unsigned int irq)
ARMADA_370_XP_SW_TRIG_INT_OFFS);
}
-void armada_xp_mpic_smp_cpu_init(void)
+static void armada_xp_mpic_smp_cpu_init(void)
{
/* Clear pending IPIs */
writel(0, per_cpu_int_base + ARMADA_370_XP_IN_DRBEL_CAUSE_OFFS);
@@ -342,6 +344,20 @@ void armada_xp_mpic_smp_cpu_init(void)
/* Unmask IPI interrupt */
writel(0, per_cpu_int_base + ARMADA_370_XP_INT_CLEAR_MASK_OFFS);
}
+
+static int armada_xp_mpic_secondary_init(struct notifier_block *nfb,
+ unsigned long action, void *hcpu)
+{
+ if (action == CPU_STARTING || action == CPU_STARTING_FROZEN)
+ armada_xp_mpic_smp_cpu_init();
+ return NOTIFY_OK;
+}
+
+static struct notifier_block armada_370_xp_mpic_cpu_notifier = {
+ .notifier_call = armada_xp_mpic_secondary_init,
+ .priority = 100,
+};
+
#endif /* CONFIG_SMP */
static struct irq_domain_ops armada_370_xp_mpic_irq_ops = {
@@ -497,6 +513,10 @@ static int __init armada_370_xp_mpic_of_init(struct device_node *node,
if (parent_irq <= 0) {
irq_set_default_host(armada_370_xp_mpic_domain);
set_handle_irq(armada_370_xp_handle_irq);
+#ifdef CONFIG_SMP
+ set_smp_cross_call(armada_mpic_send_doorbell);
+ register_cpu_notifier(&armada_370_xp_mpic_cpu_notifier);
+#endif
} else {
irq_set_chained_handler(parent_irq,
armada_370_xp_mpic_handle_cascade_irq);
diff --git a/drivers/irqchip/irq-orion.c b/drivers/irqchip/irq-orion.c
index e25f246cd2fb..34d18b48bb78 100644
--- a/drivers/irqchip/irq-orion.c
+++ b/drivers/irqchip/irq-orion.c
@@ -42,7 +42,7 @@ __exception_irq_entry orion_handle_irq(struct pt_regs *regs)
u32 stat = readl_relaxed(gc->reg_base + ORION_IRQ_CAUSE) &
gc->mask_cache;
while (stat) {
- u32 hwirq = ffs(stat) - 1;
+ u32 hwirq = __fls(stat);
u32 irq = irq_find_mapping(orion_irq_domain,
gc->irq_base + hwirq);
handle_IRQ(irq, regs);
@@ -117,7 +117,7 @@ static void orion_bridge_irq_handler(unsigned int irq, struct irq_desc *desc)
gc->mask_cache;
while (stat) {
- u32 hwirq = ffs(stat) - 1;
+ u32 hwirq = __fls(stat);
generic_handle_irq(irq_find_mapping(d, gc->irq_base + hwirq));
stat &= ~(1 << hwirq);
diff --git a/drivers/mfd/twl-core.c b/drivers/mfd/twl-core.c
index e87140bef667..db11b4f40611 100644
--- a/drivers/mfd/twl-core.c
+++ b/drivers/mfd/twl-core.c
@@ -98,7 +98,11 @@
#define TWL4030_BASEADD_BACKUP 0x0014
#define TWL4030_BASEADD_INT 0x002E
#define TWL4030_BASEADD_PM_MASTER 0x0036
+
#define TWL4030_BASEADD_PM_RECEIVER 0x005B
+#define TWL4030_DCDC_GLOBAL_CFG 0x06
+#define SMARTREFLEX_ENABLE BIT(3)
+
#define TWL4030_BASEADD_RTC 0x001C
#define TWL4030_BASEADD_SECURED_REG 0x0000
@@ -1204,6 +1208,11 @@ twl_probe(struct i2c_client *client, const struct i2c_device_id *id)
* Disable TWL4030/TWL5030 I2C Pull-up on I2C1 and I2C4(SR) interface.
* Program I2C_SCL_CTRL_PU(bit 0)=0, I2C_SDA_CTRL_PU (bit 2)=0,
* SR_I2C_SCL_CTRL_PU(bit 4)=0 and SR_I2C_SDA_CTRL_PU(bit 6)=0.
+ *
+ * Also, always enable SmartReflex bit as that's needed for omaps to
+ * to do anything over I2C4 for voltage scaling even if SmartReflex
+ * is disabled. Without the SmartReflex bit omap sys_clkreq idle
+ * signal will never trigger for retention idle.
*/
if (twl_class_is_4030()) {
u8 temp;
@@ -1212,6 +1221,12 @@ twl_probe(struct i2c_client *client, const struct i2c_device_id *id)
temp &= ~(SR_I2C_SDA_CTRL_PU | SR_I2C_SCL_CTRL_PU | \
I2C_SDA_CTRL_PU | I2C_SCL_CTRL_PU);
twl_i2c_write_u8(TWL4030_MODULE_INTBR, temp, REG_GPPUPDCTR1);
+
+ twl_i2c_read_u8(TWL_MODULE_PM_RECEIVER, &temp,
+ TWL4030_DCDC_GLOBAL_CFG);
+ temp |= SMARTREFLEX_ENABLE;
+ twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, temp,
+ TWL4030_DCDC_GLOBAL_CFG);
}
if (node) {
diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig
index fa0e4e057b99..49b46e6ca959 100644
--- a/drivers/power/reset/Kconfig
+++ b/drivers/power/reset/Kconfig
@@ -12,6 +12,14 @@ config POWER_RESET_AS3722
help
This driver supports turning off board via a ams AS3722 power-off.
+config POWER_RESET_AXXIA
+ bool "LSI Axxia reset driver"
+ depends on POWER_RESET && ARCH_AXXIA
+ help
+ This driver supports restart for Axxia SoC.
+
+ Say Y if you have an Axxia family SoC.
+
config POWER_RESET_GPIO
bool "GPIO power-off driver"
depends on OF_GPIO && POWER_RESET
diff --git a/drivers/power/reset/Makefile b/drivers/power/reset/Makefile
index a5b4a77d1a41..16c0516e5a19 100644
--- a/drivers/power/reset/Makefile
+++ b/drivers/power/reset/Makefile
@@ -1,4 +1,5 @@
obj-$(CONFIG_POWER_RESET_AS3722) += as3722-poweroff.o
+obj-$(CONFIG_POWER_RESET_AXXIA) += axxia-reset.o
obj-$(CONFIG_POWER_RESET_GPIO) += gpio-poweroff.o
obj-$(CONFIG_POWER_RESET_MSM) += msm-poweroff.o
obj-$(CONFIG_POWER_RESET_QNAP) += qnap-poweroff.o
diff --git a/drivers/power/reset/axxia-reset.c b/drivers/power/reset/axxia-reset.c
new file mode 100644
index 000000000000..3b1f8d601784
--- /dev/null
+++ b/drivers/power/reset/axxia-reset.c
@@ -0,0 +1,88 @@
+/*
+ * Reset driver for Axxia devices
+ *
+ * Copyright (C) 2014 LSI
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/reboot.h>
+#include <linux/regmap.h>
+
+#include <asm/system_misc.h>
+
+
+#define SC_CRIT_WRITE_KEY 0x1000
+#define SC_LATCH_ON_RESET 0x1004
+#define SC_RESET_CONTROL 0x1008
+#define RSTCTL_RST_ZERO (1<<3)
+#define RSTCTL_RST_FAB (1<<2)
+#define RSTCTL_RST_CHIP (1<<1)
+#define RSTCTL_RST_SYS (1<<0)
+#define SC_EFUSE_INT_STATUS 0x180c
+#define EFUSE_READ_DONE (1<<31)
+
+static struct regmap *syscon;
+
+static void do_axxia_restart(enum reboot_mode reboot_mode, const char *cmd)
+{
+ /* Access Key (0xab) */
+ regmap_write(syscon, SC_CRIT_WRITE_KEY, 0xab);
+ /* Select internal boot from 0xffff0000 */
+ regmap_write(syscon, SC_LATCH_ON_RESET, 0x00000040);
+ /* Assert ResetReadDone (to avoid hanging in boot ROM) */
+ regmap_write(syscon, SC_EFUSE_INT_STATUS, EFUSE_READ_DONE);
+ /* Assert chip reset */
+ regmap_update_bits(syscon, SC_RESET_CONTROL,
+ RSTCTL_RST_CHIP, RSTCTL_RST_CHIP);
+}
+
+static int axxia_reset_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+
+ syscon = syscon_regmap_lookup_by_phandle(dev->of_node, "syscon");
+ if (IS_ERR(syscon)) {
+ pr_err("%s: syscon lookup failed\n", dev->of_node->name);
+ return PTR_ERR(syscon);
+ }
+
+ arm_pm_restart = do_axxia_restart;
+
+ return 0;
+}
+
+static const struct of_device_id of_axxia_reset_match[] = {
+ { .compatible = "lsi,axm55xx-reset", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, of_axxia_reset_match);
+
+static struct platform_driver axxia_reset_driver = {
+ .probe = axxia_reset_probe,
+ .driver = {
+ .name = "axxia-reset",
+ .of_match_table = of_match_ptr(of_axxia_reset_match),
+ },
+};
+
+static int __init axxia_reset_init(void)
+{
+ return platform_driver_register(&axxia_reset_driver);
+}
+device_initcall(axxia_reset_init);
diff --git a/include/dt-bindings/clock/exynos3250.h b/include/dt-bindings/clock/exynos3250.h
new file mode 100644
index 000000000000..b535e9da7de6
--- /dev/null
+++ b/include/dt-bindings/clock/exynos3250.h
@@ -0,0 +1,258 @@
+/*
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ * Author: Tomasz Figa <t.figa@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Device Tree binding constants for Samsung Exynos3250 clock controllers.
+ */
+
+#ifndef _DT_BINDINGS_CLOCK_SAMSUNG_EXYNOS3250_CLOCK_H
+#define _DT_BINDINGS_CLOCK_SAMSUNG_EXYNOS3250_CLOCK_H
+
+/*
+ * Let each exported clock get a unique index, which is used on DT-enabled
+ * platforms to lookup the clock from a clock specifier. These indices are
+ * therefore considered an ABI and so must not be changed. This implies
+ * that new clocks should be added either in free spaces between clock groups
+ * or at the end.
+ */
+
+
+/*
+ * Main CMU
+ */
+
+#define CLK_OSCSEL 1
+#define CLK_FIN_PLL 2
+#define CLK_FOUT_APLL 3
+#define CLK_FOUT_VPLL 4
+#define CLK_FOUT_UPLL 5
+#define CLK_FOUT_MPLL 6
+
+/* Muxes */
+#define CLK_MOUT_MPLL_USER_L 16
+#define CLK_MOUT_GDL 17
+#define CLK_MOUT_MPLL_USER_R 18
+#define CLK_MOUT_GDR 19
+#define CLK_MOUT_EBI 20
+#define CLK_MOUT_ACLK_200 21
+#define CLK_MOUT_ACLK_160 22
+#define CLK_MOUT_ACLK_100 23
+#define CLK_MOUT_ACLK_266_1 24
+#define CLK_MOUT_ACLK_266_0 25
+#define CLK_MOUT_ACLK_266 26
+#define CLK_MOUT_VPLL 27
+#define CLK_MOUT_EPLL_USER 28
+#define CLK_MOUT_EBI_1 29
+#define CLK_MOUT_UPLL 30
+#define CLK_MOUT_ACLK_400_MCUISP_SUB 31
+#define CLK_MOUT_MPLL 32
+#define CLK_MOUT_ACLK_400_MCUISP 33
+#define CLK_MOUT_VPLLSRC 34
+#define CLK_MOUT_CAM1 35
+#define CLK_MOUT_CAM_BLK 36
+#define CLK_MOUT_MFC 37
+#define CLK_MOUT_MFC_1 38
+#define CLK_MOUT_MFC_0 39
+#define CLK_MOUT_G3D 40
+#define CLK_MOUT_G3D_1 41
+#define CLK_MOUT_G3D_0 42
+#define CLK_MOUT_MIPI0 43
+#define CLK_MOUT_FIMD0 44
+#define CLK_MOUT_UART_ISP 45
+#define CLK_MOUT_SPI1_ISP 46
+#define CLK_MOUT_SPI0_ISP 47
+#define CLK_MOUT_TSADC 48
+#define CLK_MOUT_MMC1 49
+#define CLK_MOUT_MMC0 50
+#define CLK_MOUT_UART1 51
+#define CLK_MOUT_UART0 52
+#define CLK_MOUT_SPI1 53
+#define CLK_MOUT_SPI0 54
+#define CLK_MOUT_AUDIO 55
+#define CLK_MOUT_MPLL_USER_C 56
+#define CLK_MOUT_HPM 57
+#define CLK_MOUT_CORE 58
+#define CLK_MOUT_APLL 59
+#define CLK_MOUT_ACLK_266_SUB 60
+
+/* Dividers */
+#define CLK_DIV_GPL 64
+#define CLK_DIV_GDL 65
+#define CLK_DIV_GPR 66
+#define CLK_DIV_GDR 67
+#define CLK_DIV_MPLL_PRE 68
+#define CLK_DIV_ACLK_400_MCUISP 69
+#define CLK_DIV_EBI 70
+#define CLK_DIV_ACLK_200 71
+#define CLK_DIV_ACLK_160 72
+#define CLK_DIV_ACLK_100 73
+#define CLK_DIV_ACLK_266 74
+#define CLK_DIV_CAM1 75
+#define CLK_DIV_CAM_BLK 76
+#define CLK_DIV_MFC 77
+#define CLK_DIV_G3D 78
+#define CLK_DIV_MIPI0_PRE 79
+#define CLK_DIV_MIPI0 80
+#define CLK_DIV_FIMD0 81
+#define CLK_DIV_UART_ISP 82
+#define CLK_DIV_SPI1_ISP_PRE 83
+#define CLK_DIV_SPI1_ISP 84
+#define CLK_DIV_SPI0_ISP_PRE 85
+#define CLK_DIV_SPI0_ISP 86
+#define CLK_DIV_TSADC_PRE 87
+#define CLK_DIV_TSADC 88
+#define CLK_DIV_MMC1_PRE 89
+#define CLK_DIV_MMC1 90
+#define CLK_DIV_MMC0_PRE 91
+#define CLK_DIV_MMC0 92
+#define CLK_DIV_UART1 93
+#define CLK_DIV_UART0 94
+#define CLK_DIV_SPI1_PRE 95
+#define CLK_DIV_SPI1 96
+#define CLK_DIV_SPI0_PRE 97
+#define CLK_DIV_SPI0 98
+#define CLK_DIV_PCM 99
+#define CLK_DIV_AUDIO 100
+#define CLK_DIV_I2S 101
+#define CLK_DIV_CORE2 102
+#define CLK_DIV_APLL 103
+#define CLK_DIV_PCLK_DBG 104
+#define CLK_DIV_ATB 105
+#define CLK_DIV_COREM 106
+#define CLK_DIV_CORE 107
+#define CLK_DIV_HPM 108
+#define CLK_DIV_COPY 109
+
+/* Gates */
+#define CLK_ASYNC_G3D 128
+#define CLK_ASYNC_MFCL 129
+#define CLK_PPMULEFT 130
+#define CLK_GPIO_LEFT 131
+#define CLK_ASYNC_ISPMX 132
+#define CLK_ASYNC_FSYSD 133
+#define CLK_ASYNC_LCD0X 134
+#define CLK_ASYNC_CAMX 135
+#define CLK_PPMURIGHT 136
+#define CLK_GPIO_RIGHT 137
+#define CLK_MONOCNT 138
+#define CLK_TZPC6 139
+#define CLK_PROVISIONKEY1 140
+#define CLK_PROVISIONKEY0 141
+#define CLK_CMU_ISPPART 142
+#define CLK_TMU_APBIF 143
+#define CLK_KEYIF 144
+#define CLK_RTC 145
+#define CLK_WDT 146
+#define CLK_MCT 147
+#define CLK_SECKEY 148
+#define CLK_TZPC5 149
+#define CLK_TZPC4 150
+#define CLK_TZPC3 151
+#define CLK_TZPC2 152
+#define CLK_TZPC1 153
+#define CLK_TZPC0 154
+#define CLK_CMU_COREPART 155
+#define CLK_CMU_TOPPART 156
+#define CLK_PMU_APBIF 157
+#define CLK_SYSREG 158
+#define CLK_CHIP_ID 159
+#define CLK_QEJPEG 160
+#define CLK_PIXELASYNCM1 161
+#define CLK_PIXELASYNCM0 162
+#define CLK_PPMUCAMIF 163
+#define CLK_QEM2MSCALER 164
+#define CLK_QEGSCALER1 165
+#define CLK_QEGSCALER0 166
+#define CLK_SMMUJPEG 167
+#define CLK_SMMUM2M2SCALER 168
+#define CLK_SMMUGSCALER1 169
+#define CLK_SMMUGSCALER0 170
+#define CLK_JPEG 171
+#define CLK_M2MSCALER 172
+#define CLK_GSCALER1 173
+#define CLK_GSCALER0 174
+#define CLK_QEMFC 175
+#define CLK_PPMUMFC_L 176
+#define CLK_SMMUMFC_L 177
+#define CLK_MFC 178
+#define CLK_SMMUG3D 179
+#define CLK_QEG3D 180
+#define CLK_PPMUG3D 181
+#define CLK_G3D 182
+#define CLK_QE_CH1_LCD 183
+#define CLK_QE_CH0_LCD 184
+#define CLK_PPMULCD0 185
+#define CLK_SMMUFIMD0 186
+#define CLK_DSIM0 187
+#define CLK_FIMD0 188
+#define CLK_CAM1 189
+#define CLK_UART_ISP_TOP 190
+#define CLK_SPI1_ISP_TOP 191
+#define CLK_SPI0_ISP_TOP 192
+#define CLK_TSADC 193
+#define CLK_PPMUFILE 194
+#define CLK_USBOTG 195
+#define CLK_USBHOST 196
+#define CLK_SROMC 197
+#define CLK_SDMMC1 198
+#define CLK_SDMMC0 199
+#define CLK_PDMA1 200
+#define CLK_PDMA0 201
+#define CLK_PWM 202
+#define CLK_PCM 203
+#define CLK_I2S 204
+#define CLK_SPI1 205
+#define CLK_SPI0 206
+#define CLK_I2C7 207
+#define CLK_I2C6 208
+#define CLK_I2C5 209
+#define CLK_I2C4 210
+#define CLK_I2C3 211
+#define CLK_I2C2 212
+#define CLK_I2C1 213
+#define CLK_I2C0 214
+#define CLK_UART1 215
+#define CLK_UART0 216
+#define CLK_BLOCK_LCD 217
+#define CLK_BLOCK_G3D 218
+#define CLK_BLOCK_MFC 219
+#define CLK_BLOCK_CAM 220
+#define CLK_SMIES 221
+
+/* Special clocks */
+#define CLK_SCLK_JPEG 224
+#define CLK_SCLK_M2MSCALER 225
+#define CLK_SCLK_GSCALER1 226
+#define CLK_SCLK_GSCALER0 227
+#define CLK_SCLK_MFC 228
+#define CLK_SCLK_G3D 229
+#define CLK_SCLK_MIPIDPHY2L 230
+#define CLK_SCLK_MIPI0 231
+#define CLK_SCLK_FIMD0 232
+#define CLK_SCLK_CAM1 233
+#define CLK_SCLK_UART_ISP 234
+#define CLK_SCLK_SPI1_ISP 235
+#define CLK_SCLK_SPI0_ISP 236
+#define CLK_SCLK_UPLL 237
+#define CLK_SCLK_TSADC 238
+#define CLK_SCLK_EBI 239
+#define CLK_SCLK_MMC1 240
+#define CLK_SCLK_MMC0 241
+#define CLK_SCLK_I2S 242
+#define CLK_SCLK_PCM 243
+#define CLK_SCLK_SPI1 244
+#define CLK_SCLK_SPI0 245
+#define CLK_SCLK_UART1 246
+#define CLK_SCLK_UART0 247
+
+/*
+ * Total number of clocks of main CMU.
+ * NOTE: Must be equal to last clock ID increased by one.
+ */
+#define CLK_NR_CLKS 248
+
+#endif /* _DT_BINDINGS_CLOCK_SAMSUNG_EXYNOS3250_CLOCK_H */
diff --git a/include/dt-bindings/clock/exynos4.h b/include/dt-bindings/clock/exynos4.h
index 75aff336dfb0..1106ca540a96 100644
--- a/include/dt-bindings/clock/exynos4.h
+++ b/include/dt-bindings/clock/exynos4.h
@@ -33,6 +33,7 @@
#define CLK_MOUT_MPLL_USER_C 18 /* Exynos4x12 only */
#define CLK_MOUT_CORE 19
#define CLK_MOUT_APLL 20
+#define CLK_SCLK_HDMIPHY 22
/* gate for special clocks (sclk) */
#define CLK_SCLK_FIMC0 128
@@ -181,7 +182,6 @@
#define CLK_KEYIF 347
#define CLK_AUDSS 348
#define CLK_MIPI_HSI 349 /* Exynos4210 only */
-#define CLK_MDMA2 350 /* Exynos4210 only */
#define CLK_PIXELASYNCM0 351
#define CLK_PIXELASYNCM1 352
#define CLK_FIMC_LITE0 353 /* Exynos4x12 only */
diff --git a/include/dt-bindings/clock/exynos5250.h b/include/dt-bindings/clock/exynos5250.h
index 922f2dca9bf0..be6e97c54f54 100644
--- a/include/dt-bindings/clock/exynos5250.h
+++ b/include/dt-bindings/clock/exynos5250.h
@@ -150,11 +150,30 @@
#define CLK_G2D 345
#define CLK_MDMA0 346
#define CLK_SMMU_MDMA0 347
+#define CLK_SSS 348
+#define CLK_G3D 349
+#define CLK_SMMU_TV 350
+#define CLK_SMMU_FIMD1 351
+#define CLK_SMMU_2D 352
+#define CLK_SMMU_FIMC_ISP 353
+#define CLK_SMMU_FIMC_DRC 354
+#define CLK_SMMU_FIMC_SCC 355
+#define CLK_SMMU_FIMC_SCP 356
+#define CLK_SMMU_FIMC_FD 357
+#define CLK_SMMU_FIMC_MCU 358
+#define CLK_SMMU_FIMC_ODC 359
+#define CLK_SMMU_FIMC_DIS0 360
+#define CLK_SMMU_FIMC_DIS1 361
+#define CLK_SMMU_FIMC_3DNR 362
+#define CLK_SMMU_FIMC_LITE0 363
+#define CLK_SMMU_FIMC_LITE1 364
+#define CLK_CAMIF_TOP 365
/* mux clocks */
#define CLK_MOUT_HDMI 1024
+#define CLK_MOUT_GPLL 1025
/* must be greater than maximal clock id */
-#define CLK_NR_CLKS 1025
+#define CLK_NR_CLKS 1026
#endif /* _DT_BINDINGS_CLOCK_EXYNOS_5250_H */
diff --git a/include/dt-bindings/clock/exynos5260-clk.h b/include/dt-bindings/clock/exynos5260-clk.h
new file mode 100644
index 000000000000..a4bac9a1764f
--- /dev/null
+++ b/include/dt-bindings/clock/exynos5260-clk.h
@@ -0,0 +1,469 @@
+/*
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ * Author: Rahul Sharma <rahul.sharma@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Provides Constants for Exynos5260 clocks.
+*/
+
+#ifndef _DT_BINDINGS_CLK_EXYNOS5260_H
+#define _DT_BINDINGS_CLK_EXYNOS5260_H
+
+/* Clock names: <cmu><type><IP> */
+
+/* List Of Clocks For CMU_TOP */
+
+#define TOP_FOUT_DISP_PLL 1
+#define TOP_FOUT_AUD_PLL 2
+#define TOP_MOUT_AUDTOP_PLL_USER 3
+#define TOP_MOUT_AUD_PLL 4
+#define TOP_MOUT_DISP_PLL 5
+#define TOP_MOUT_BUSTOP_PLL_USER 6
+#define TOP_MOUT_MEMTOP_PLL_USER 7
+#define TOP_MOUT_MEDIATOP_PLL_USER 8
+#define TOP_MOUT_DISP_DISP_333 9
+#define TOP_MOUT_ACLK_DISP_333 10
+#define TOP_MOUT_DISP_DISP_222 11
+#define TOP_MOUT_ACLK_DISP_222 12
+#define TOP_MOUT_DISP_MEDIA_PIXEL 13
+#define TOP_MOUT_FIMD1 14
+#define TOP_MOUT_SCLK_PERI_SPI0_CLK 15
+#define TOP_MOUT_SCLK_PERI_SPI1_CLK 16
+#define TOP_MOUT_SCLK_PERI_SPI2_CLK 17
+#define TOP_MOUT_SCLK_PERI_UART0_UCLK 18
+#define TOP_MOUT_SCLK_PERI_UART2_UCLK 19
+#define TOP_MOUT_SCLK_PERI_UART1_UCLK 20
+#define TOP_MOUT_BUS4_BUSTOP_100 21
+#define TOP_MOUT_BUS4_BUSTOP_400 22
+#define TOP_MOUT_BUS3_BUSTOP_100 23
+#define TOP_MOUT_BUS3_BUSTOP_400 24
+#define TOP_MOUT_BUS2_BUSTOP_400 25
+#define TOP_MOUT_BUS2_BUSTOP_100 26
+#define TOP_MOUT_BUS1_BUSTOP_100 27
+#define TOP_MOUT_BUS1_BUSTOP_400 28
+#define TOP_MOUT_SCLK_FSYS_USB 29
+#define TOP_MOUT_SCLK_FSYS_MMC0_SDCLKIN_A 30
+#define TOP_MOUT_SCLK_FSYS_MMC1_SDCLKIN_A 31
+#define TOP_MOUT_SCLK_FSYS_MMC2_SDCLKIN_A 32
+#define TOP_MOUT_SCLK_FSYS_MMC0_SDCLKIN_B 33
+#define TOP_MOUT_SCLK_FSYS_MMC1_SDCLKIN_B 34
+#define TOP_MOUT_SCLK_FSYS_MMC2_SDCLKIN_B 35
+#define TOP_MOUT_ACLK_ISP1_266 36
+#define TOP_MOUT_ISP1_MEDIA_266 37
+#define TOP_MOUT_ACLK_ISP1_400 38
+#define TOP_MOUT_ISP1_MEDIA_400 39
+#define TOP_MOUT_SCLK_ISP1_SPI0 40
+#define TOP_MOUT_SCLK_ISP1_SPI1 41
+#define TOP_MOUT_SCLK_ISP1_UART 42
+#define TOP_MOUT_SCLK_ISP1_SENSOR2 43
+#define TOP_MOUT_SCLK_ISP1_SENSOR1 44
+#define TOP_MOUT_SCLK_ISP1_SENSOR0 45
+#define TOP_MOUT_ACLK_MFC_333 46
+#define TOP_MOUT_MFC_BUSTOP_333 47
+#define TOP_MOUT_ACLK_G2D_333 48
+#define TOP_MOUT_G2D_BUSTOP_333 49
+#define TOP_MOUT_ACLK_GSCL_FIMC 50
+#define TOP_MOUT_GSCL_BUSTOP_FIMC 51
+#define TOP_MOUT_ACLK_GSCL_333 52
+#define TOP_MOUT_GSCL_BUSTOP_333 53
+#define TOP_MOUT_ACLK_GSCL_400 54
+#define TOP_MOUT_M2M_MEDIATOP_400 55
+#define TOP_DOUT_ACLK_MFC_333 56
+#define TOP_DOUT_ACLK_G2D_333 57
+#define TOP_DOUT_SCLK_ISP1_SENSOR2_A 58
+#define TOP_DOUT_SCLK_ISP1_SENSOR1_A 59
+#define TOP_DOUT_SCLK_ISP1_SENSOR0_A 60
+#define TOP_DOUT_ACLK_GSCL_FIMC 61
+#define TOP_DOUT_ACLK_GSCL_400 62
+#define TOP_DOUT_ACLK_GSCL_333 63
+#define TOP_DOUT_SCLK_ISP1_SPI0_B 64
+#define TOP_DOUT_SCLK_ISP1_SPI0_A 65
+#define TOP_DOUT_ACLK_ISP1_400 66
+#define TOP_DOUT_ACLK_ISP1_266 67
+#define TOP_DOUT_SCLK_ISP1_UART 68
+#define TOP_DOUT_SCLK_ISP1_SPI1_B 69
+#define TOP_DOUT_SCLK_ISP1_SPI1_A 70
+#define TOP_DOUT_SCLK_ISP1_SENSOR2_B 71
+#define TOP_DOUT_SCLK_ISP1_SENSOR1_B 72
+#define TOP_DOUT_SCLK_ISP1_SENSOR0_B 73
+#define TOP_DOUTTOP__SCLK_HPM_TARGETCLK 74
+#define TOP_DOUT_SCLK_DISP_PIXEL 75
+#define TOP_DOUT_ACLK_DISP_222 76
+#define TOP_DOUT_ACLK_DISP_333 77
+#define TOP_DOUT_ACLK_BUS4_100 78
+#define TOP_DOUT_ACLK_BUS4_400 79
+#define TOP_DOUT_ACLK_BUS3_100 80
+#define TOP_DOUT_ACLK_BUS3_400 81
+#define TOP_DOUT_ACLK_BUS2_100 82
+#define TOP_DOUT_ACLK_BUS2_400 83
+#define TOP_DOUT_ACLK_BUS1_100 84
+#define TOP_DOUT_ACLK_BUS1_400 85
+#define TOP_DOUT_SCLK_PERI_SPI1_B 86
+#define TOP_DOUT_SCLK_PERI_SPI1_A 87
+#define TOP_DOUT_SCLK_PERI_SPI0_B 88
+#define TOP_DOUT_SCLK_PERI_SPI0_A 89
+#define TOP_DOUT_SCLK_PERI_UART0 90
+#define TOP_DOUT_SCLK_PERI_UART2 91
+#define TOP_DOUT_SCLK_PERI_UART1 92
+#define TOP_DOUT_SCLK_PERI_SPI2_B 93
+#define TOP_DOUT_SCLK_PERI_SPI2_A 94
+#define TOP_DOUT_ACLK_PERI_AUD 95
+#define TOP_DOUT_ACLK_PERI_66 96
+#define TOP_DOUT_SCLK_FSYS_MMC0_SDCLKIN_B 97
+#define TOP_DOUT_SCLK_FSYS_MMC0_SDCLKIN_A 98
+#define TOP_DOUT_SCLK_FSYS_USBDRD30_SUSPEND_CLK 99
+#define TOP_DOUT_ACLK_FSYS_200 100
+#define TOP_DOUT_SCLK_FSYS_MMC2_SDCLKIN_B 101
+#define TOP_DOUT_SCLK_FSYS_MMC2_SDCLKIN_A 102
+#define TOP_DOUT_SCLK_FSYS_MMC1_SDCLKIN_B 103
+#define TOP_DOUT_SCLK_FSYS_MMC1_SDCLKIN_A 104
+#define TOP_SCLK_FIMD1 105
+#define TOP_SCLK_MMC2 106
+#define TOP_SCLK_MMC1 107
+#define TOP_SCLK_MMC0 108
+#define PHYCLK_DPTX_PHY_CH3_TXD_CLK 109
+#define PHYCLK_DPTX_PHY_CH2_TXD_CLK 110
+#define PHYCLK_DPTX_PHY_CH1_TXD_CLK 111
+#define PHYCLK_DPTX_PHY_CH0_TXD_CLK 112
+#define phyclk_hdmi_phy_tmds_clko 113
+#define PHYCLK_HDMI_PHY_PIXEL_CLKO 114
+#define PHYCLK_HDMI_LINK_O_TMDS_CLKHI 115
+#define PHYCLK_MIPI_DPHY_4L_M_TXBYTECLKHS 116
+#define PHYCLK_DPTX_PHY_O_REF_CLK_24M 117
+#define PHYCLK_DPTX_PHY_CLK_DIV2 118
+#define PHYCLK_MIPI_DPHY_4L_M_RXCLKESC0 119
+#define PHYCLK_USBHOST20_PHY_PHYCLOCK 120
+#define PHYCLK_USBHOST20_PHY_FREECLK 121
+#define PHYCLK_USBHOST20_PHY_CLK48MOHCI 122
+#define PHYCLK_USBDRD30_UDRD30_PIPE_PCLK 123
+#define PHYCLK_USBDRD30_UDRD30_PHYCLOCK 124
+#define TOP_NR_CLK 125
+
+
+/* List Of Clocks For CMU_EGL */
+
+#define EGL_FOUT_EGL_PLL 1
+#define EGL_FOUT_EGL_DPLL 2
+#define EGL_MOUT_EGL_B 3
+#define EGL_MOUT_EGL_PLL 4
+#define EGL_DOUT_EGL_PLL 5
+#define EGL_DOUT_EGL_PCLK_DBG 6
+#define EGL_DOUT_EGL_ATCLK 7
+#define EGL_DOUT_PCLK_EGL 8
+#define EGL_DOUT_ACLK_EGL 9
+#define EGL_DOUT_EGL2 10
+#define EGL_DOUT_EGL1 11
+#define EGL_NR_CLK 12
+
+
+/* List Of Clocks For CMU_KFC */
+
+#define KFC_FOUT_KFC_PLL 1
+#define KFC_MOUT_KFC_PLL 2
+#define KFC_MOUT_KFC 3
+#define KFC_DOUT_KFC_PLL 4
+#define KFC_DOUT_PCLK_KFC 5
+#define KFC_DOUT_ACLK_KFC 6
+#define KFC_DOUT_KFC_PCLK_DBG 7
+#define KFC_DOUT_KFC_ATCLK 8
+#define KFC_DOUT_KFC2 9
+#define KFC_DOUT_KFC1 10
+#define KFC_NR_CLK 11
+
+
+/* List Of Clocks For CMU_MIF */
+
+#define MIF_FOUT_MEM_PLL 1
+#define MIF_FOUT_MEDIA_PLL 2
+#define MIF_FOUT_BUS_PLL 3
+#define MIF_MOUT_CLK2X_PHY 4
+#define MIF_MOUT_MIF_DREX2X 5
+#define MIF_MOUT_CLKM_PHY 6
+#define MIF_MOUT_MIF_DREX 7
+#define MIF_MOUT_MEDIA_PLL 8
+#define MIF_MOUT_BUS_PLL 9
+#define MIF_MOUT_MEM_PLL 10
+#define MIF_DOUT_ACLK_BUS_100 11
+#define MIF_DOUT_ACLK_BUS_200 12
+#define MIF_DOUT_ACLK_MIF_466 13
+#define MIF_DOUT_CLK2X_PHY 14
+#define MIF_DOUT_CLKM_PHY 15
+#define MIF_DOUT_BUS_PLL 16
+#define MIF_DOUT_MEM_PLL 17
+#define MIF_DOUT_MEDIA_PLL 18
+#define MIF_CLK_LPDDR3PHY_WRAP1 19
+#define MIF_CLK_LPDDR3PHY_WRAP0 20
+#define MIF_CLK_MONOCNT 21
+#define MIF_CLK_MIF_RTC 22
+#define MIF_CLK_DREX1 23
+#define MIF_CLK_DREX0 24
+#define MIF_CLK_INTMEM 25
+#define MIF_SCLK_LPDDR3PHY_WRAP_U1 26
+#define MIF_SCLK_LPDDR3PHY_WRAP_U0 27
+#define MIF_NR_CLK 28
+
+
+/* List Of Clocks For CMU_G3D */
+
+#define G3D_FOUT_G3D_PLL 1
+#define G3D_MOUT_G3D_PLL 2
+#define G3D_DOUT_PCLK_G3D 3
+#define G3D_DOUT_ACLK_G3D 4
+#define G3D_CLK_G3D_HPM 5
+#define G3D_CLK_G3D 6
+#define G3D_NR_CLK 7
+
+
+/* List Of Clocks For CMU_AUD */
+
+#define AUD_MOUT_SCLK_AUD_PCM 1
+#define AUD_MOUT_SCLK_AUD_I2S 2
+#define AUD_MOUT_AUD_PLL_USER 3
+#define AUD_DOUT_ACLK_AUD_131 4
+#define AUD_DOUT_SCLK_AUD_UART 5
+#define AUD_DOUT_SCLK_AUD_PCM 6
+#define AUD_DOUT_SCLK_AUD_I2S 7
+#define AUD_CLK_AUD_UART 8
+#define AUD_CLK_PCM 9
+#define AUD_CLK_I2S 10
+#define AUD_CLK_DMAC 11
+#define AUD_CLK_SRAMC 12
+#define AUD_SCLK_AUD_UART 13
+#define AUD_SCLK_PCM 14
+#define AUD_SCLK_I2S 15
+#define AUD_NR_CLK 16
+
+
+/* List Of Clocks For CMU_MFC */
+
+#define MFC_MOUT_ACLK_MFC_333_USER 1
+#define MFC_DOUT_PCLK_MFC_83 2
+#define MFC_CLK_MFC 3
+#define MFC_CLK_SMMU2_MFCM1 4
+#define MFC_CLK_SMMU2_MFCM0 5
+#define MFC_NR_CLK 6
+
+
+/* List Of Clocks For CMU_GSCL */
+
+#define GSCL_MOUT_ACLK_CSIS 1
+#define GSCL_MOUT_ACLK_GSCL_FIMC_USER 2
+#define GSCL_MOUT_ACLK_M2M_400_USER 3
+#define GSCL_MOUT_ACLK_GSCL_333_USER 4
+#define GSCL_DOUT_ACLK_CSIS_200 5
+#define GSCL_DOUT_PCLK_M2M_100 6
+#define GSCL_CLK_PIXEL_GSCL1 7
+#define GSCL_CLK_PIXEL_GSCL0 8
+#define GSCL_CLK_MSCL1 9
+#define GSCL_CLK_MSCL0 10
+#define GSCL_CLK_GSCL1 11
+#define GSCL_CLK_GSCL0 12
+#define GSCL_CLK_FIMC_LITE_D 13
+#define GSCL_CLK_FIMC_LITE_B 14
+#define GSCL_CLK_FIMC_LITE_A 15
+#define GSCL_CLK_CSIS1 16
+#define GSCL_CLK_CSIS0 17
+#define GSCL_CLK_SMMU3_LITE_D 18
+#define GSCL_CLK_SMMU3_LITE_B 19
+#define GSCL_CLK_SMMU3_LITE_A 20
+#define GSCL_CLK_SMMU3_GSCL0 21
+#define GSCL_CLK_SMMU3_GSCL1 22
+#define GSCL_CLK_SMMU3_MSCL0 23
+#define GSCL_CLK_SMMU3_MSCL1 24
+#define GSCL_SCLK_CSIS1_WRAP 25
+#define GSCL_SCLK_CSIS0_WRAP 26
+#define GSCL_NR_CLK 27
+
+
+/* List Of Clocks For CMU_FSYS */
+
+#define FSYS_MOUT_PHYCLK_USBHOST20_PHYCLK_USER 1
+#define FSYS_MOUT_PHYCLK_USBHOST20_FREECLK_USER 2
+#define FSYS_MOUT_PHYCLK_USBHOST20_CLK48MOHCI_USER 3
+#define FSYS_MOUT_PHYCLK_USBDRD30_PIPE_PCLK_USER 4
+#define FSYS_MOUT_PHYCLK_USBDRD30_PHYCLOCK_USER 5
+#define FSYS_CLK_TSI 6
+#define FSYS_CLK_USBLINK 7
+#define FSYS_CLK_USBHOST20 8
+#define FSYS_CLK_USBDRD30 9
+#define FSYS_CLK_SROMC 10
+#define FSYS_CLK_PDMA 11
+#define FSYS_CLK_MMC2 12
+#define FSYS_CLK_MMC1 13
+#define FSYS_CLK_MMC0 14
+#define FSYS_CLK_RTIC 15
+#define FSYS_CLK_SMMU_RTIC 16
+#define FSYS_PHYCLK_USBDRD30 17
+#define FSYS_PHYCLK_USBHOST20 18
+#define FSYS_NR_CLK 19
+
+
+/* List Of Clocks For CMU_PERI */
+
+#define PERI_MOUT_SCLK_SPDIF 1
+#define PERI_MOUT_SCLK_I2SCOD 2
+#define PERI_MOUT_SCLK_PCM 3
+#define PERI_DOUT_I2S 4
+#define PERI_DOUT_PCM 5
+#define PERI_CLK_WDT_KFC 6
+#define PERI_CLK_WDT_EGL 7
+#define PERI_CLK_HSIC3 8
+#define PERI_CLK_HSIC2 9
+#define PERI_CLK_HSIC1 10
+#define PERI_CLK_HSIC0 11
+#define PERI_CLK_PCM 12
+#define PERI_CLK_MCT 13
+#define PERI_CLK_I2S 14
+#define PERI_CLK_I2CHDMI 15
+#define PERI_CLK_I2C7 16
+#define PERI_CLK_I2C6 17
+#define PERI_CLK_I2C5 18
+#define PERI_CLK_I2C4 19
+#define PERI_CLK_I2C9 20
+#define PERI_CLK_I2C8 21
+#define PERI_CLK_I2C11 22
+#define PERI_CLK_I2C10 23
+#define PERI_CLK_HDMICEC 24
+#define PERI_CLK_EFUSE_WRITER 25
+#define PERI_CLK_ABB 26
+#define PERI_CLK_UART2 27
+#define PERI_CLK_UART1 28
+#define PERI_CLK_UART0 29
+#define PERI_CLK_ADC 30
+#define PERI_CLK_TMU4 31
+#define PERI_CLK_TMU3 32
+#define PERI_CLK_TMU2 33
+#define PERI_CLK_TMU1 34
+#define PERI_CLK_TMU0 35
+#define PERI_CLK_SPI2 36
+#define PERI_CLK_SPI1 37
+#define PERI_CLK_SPI0 38
+#define PERI_CLK_SPDIF 39
+#define PERI_CLK_PWM 40
+#define PERI_CLK_UART4 41
+#define PERI_CLK_CHIPID 42
+#define PERI_CLK_PROVKEY0 43
+#define PERI_CLK_PROVKEY1 44
+#define PERI_CLK_SECKEY 45
+#define PERI_CLK_TOP_RTC 46
+#define PERI_CLK_TZPC10 47
+#define PERI_CLK_TZPC9 48
+#define PERI_CLK_TZPC8 49
+#define PERI_CLK_TZPC7 50
+#define PERI_CLK_TZPC6 51
+#define PERI_CLK_TZPC5 52
+#define PERI_CLK_TZPC4 53
+#define PERI_CLK_TZPC3 54
+#define PERI_CLK_TZPC2 55
+#define PERI_CLK_TZPC1 56
+#define PERI_CLK_TZPC0 57
+#define PERI_SCLK_UART2 58
+#define PERI_SCLK_UART1 59
+#define PERI_SCLK_UART0 60
+#define PERI_SCLK_SPI2 61
+#define PERI_SCLK_SPI1 62
+#define PERI_SCLK_SPI0 63
+#define PERI_SCLK_SPDIF 64
+#define PERI_SCLK_I2S 65
+#define PERI_SCLK_PCM1 66
+#define PERI_NR_CLK 67
+
+
+/* List Of Clocks For CMU_DISP */
+
+#define DISP_MOUT_SCLK_HDMI_SPDIF 1
+#define DISP_MOUT_SCLK_HDMI_PIXEL 2
+#define DISP_MOUT_PHYCLK_MIPI_DPHY_4LMRXCLK_ESC0_USER 3
+#define DISP_MOUT_PHYCLK_HDMI_PHY_TMDS_CLKO_USER 4
+#define DISP_MOUT_PHYCLK_HDMI_PHY_REF_CLKO_USER 5
+#define DISP_MOUT_HDMI_PHY_PIXEL 6
+#define DISP_MOUT_PHYCLK_HDMI_LINK_O_TMDS_CLKHI_USER 7
+#define DISP_MOUT_PHYCLK_MIPI_DPHY_4L_M_TXBYTE_CLKHS 8
+#define DISP_MOUT_PHYCLK_DPTX_PHY_O_REF_CLK_24M_USER 9
+#define DISP_MOUT_PHYCLK_DPTX_PHY_CLK_DIV2_USER 10
+#define DISP_MOUT_PHYCLK_DPTX_PHY_CH3_TXD_CLK_USER 11
+#define DISP_MOUT_PHYCLK_DPTX_PHY_CH2_TXD_CLK_USER 12
+#define DISP_MOUT_PHYCLK_DPTX_PHY_CH1_TXD_CLK_USER 13
+#define DISP_MOUT_PHYCLK_DPTX_PHY_CH0_TXD_CLK_USER 14
+#define DISP_MOUT_ACLK_DISP_222_USER 15
+#define DISP_MOUT_SCLK_DISP_PIXEL_USER 16
+#define DISP_MOUT_ACLK_DISP_333_USER 17
+#define DISP_DOUT_SCLK_HDMI_PHY_PIXEL_CLKI 18
+#define DISP_DOUT_SCLK_FIMD1_EXTCLKPLL 19
+#define DISP_DOUT_PCLK_DISP_111 20
+#define DISP_CLK_SMMU_TV 21
+#define DISP_CLK_SMMU_FIMD1M1 22
+#define DISP_CLK_SMMU_FIMD1M0 23
+#define DISP_CLK_PIXEL_MIXER 24
+#define DISP_CLK_PIXEL_DISP 25
+#define DISP_CLK_MIXER 26
+#define DISP_CLK_MIPIPHY 27
+#define DISP_CLK_HDMIPHY 28
+#define DISP_CLK_HDMI 29
+#define DISP_CLK_FIMD1 30
+#define DISP_CLK_DSIM1 31
+#define DISP_CLK_DPPHY 32
+#define DISP_CLK_DP 33
+#define DISP_SCLK_PIXEL 34
+#define DISP_MOUT_HDMI_PHY_PIXEL_USER 35
+#define DISP_NR_CLK 36
+
+
+/* List Of Clocks For CMU_G2D */
+
+#define G2D_MOUT_ACLK_G2D_333_USER 1
+#define G2D_DOUT_PCLK_G2D_83 2
+#define G2D_CLK_SMMU3_JPEG 3
+#define G2D_CLK_MDMA 4
+#define G2D_CLK_JPEG 5
+#define G2D_CLK_G2D 6
+#define G2D_CLK_SSS 7
+#define G2D_CLK_SLIM_SSS 8
+#define G2D_CLK_SMMU_SLIM_SSS 9
+#define G2D_CLK_SMMU_SSS 10
+#define G2D_CLK_SMMU_MDMA 11
+#define G2D_CLK_SMMU3_G2D 12
+#define G2D_NR_CLK 13
+
+
+/* List Of Clocks For CMU_ISP */
+
+#define ISP_MOUT_ISP_400_USER 1
+#define ISP_MOUT_ISP_266_USER 2
+#define ISP_DOUT_SCLK_MPWM 3
+#define ISP_DOUT_CA5_PCLKDBG 4
+#define ISP_DOUT_CA5_ATCLKIN 5
+#define ISP_DOUT_PCLK_ISP_133 6
+#define ISP_DOUT_PCLK_ISP_66 7
+#define ISP_CLK_GIC 8
+#define ISP_CLK_WDT 9
+#define ISP_CLK_UART 10
+#define ISP_CLK_SPI1 11
+#define ISP_CLK_SPI0 12
+#define ISP_CLK_SMMU_SCALERP 13
+#define ISP_CLK_SMMU_SCALERC 14
+#define ISP_CLK_SMMU_ISPCX 15
+#define ISP_CLK_SMMU_ISP 16
+#define ISP_CLK_SMMU_FD 17
+#define ISP_CLK_SMMU_DRC 18
+#define ISP_CLK_PWM 19
+#define ISP_CLK_MTCADC 20
+#define ISP_CLK_MPWM 21
+#define ISP_CLK_MCUCTL 22
+#define ISP_CLK_I2C1 23
+#define ISP_CLK_I2C0 24
+#define ISP_CLK_FIMC_SCALERP 25
+#define ISP_CLK_FIMC_SCALERC 26
+#define ISP_CLK_FIMC 27
+#define ISP_CLK_FIMC_FD 28
+#define ISP_CLK_FIMC_DRC 29
+#define ISP_CLK_CA5 30
+#define ISP_SCLK_SPI0_EXT 31
+#define ISP_SCLK_SPI1_EXT 32
+#define ISP_SCLK_UART_EXT 33
+#define ISP_NR_CLK 34
+
+#endif
diff --git a/include/dt-bindings/clock/exynos5410.h b/include/dt-bindings/clock/exynos5410.h
new file mode 100644
index 000000000000..9b180f032e2d
--- /dev/null
+++ b/include/dt-bindings/clock/exynos5410.h
@@ -0,0 +1,33 @@
+#ifndef _DT_BINDINGS_CLOCK_EXYNOS_5410_H
+#define _DT_BINDINGS_CLOCK_EXYNOS_5410_H
+
+/* core clocks */
+#define CLK_FIN_PLL 1
+#define CLK_FOUT_APLL 2
+#define CLK_FOUT_CPLL 3
+#define CLK_FOUT_MPLL 4
+#define CLK_FOUT_BPLL 5
+#define CLK_FOUT_KPLL 6
+
+/* gate for special clocks (sclk) */
+#define CLK_SCLK_UART0 128
+#define CLK_SCLK_UART1 129
+#define CLK_SCLK_UART2 130
+#define CLK_SCLK_UART3 131
+#define CLK_SCLK_MMC0 132
+#define CLK_SCLK_MMC1 133
+#define CLK_SCLK_MMC2 134
+
+/* gate clocks */
+#define CLK_UART0 257
+#define CLK_UART1 258
+#define CLK_UART2 259
+#define CLK_UART3 260
+#define CLK_MCT 315
+#define CLK_MMC0 351
+#define CLK_MMC1 352
+#define CLK_MMC2 353
+
+#define CLK_NR_CLKS 512
+
+#endif /* _DT_BINDINGS_CLOCK_EXYNOS_5410_H */
diff --git a/include/dt-bindings/clock/exynos5420.h b/include/dt-bindings/clock/exynos5420.h
index 5eefd8813f02..97dcb89d37d3 100644
--- a/include/dt-bindings/clock/exynos5420.h
+++ b/include/dt-bindings/clock/exynos5420.h
@@ -58,6 +58,9 @@
#define CLK_SCLK_GSCL_WA 156
#define CLK_SCLK_GSCL_WB 157
#define CLK_SCLK_HDMIPHY 158
+#define CLK_MAU_EPLL 159
+#define CLK_SCLK_HSIC_12M 160
+#define CLK_SCLK_MPHY_IXTAL24 161
/* gate clocks */
#define CLK_ACLK66_PERIC 256
@@ -69,10 +72,10 @@
#define CLK_I2C1 262
#define CLK_I2C2 263
#define CLK_I2C3 264
-#define CLK_I2C4 265
-#define CLK_I2C5 266
-#define CLK_I2C6 267
-#define CLK_I2C7 268
+#define CLK_USI0 265
+#define CLK_USI1 266
+#define CLK_USI2 267
+#define CLK_USI3 268
#define CLK_I2C_HDMI 269
#define CLK_TSADC 270
#define CLK_SPI0 271
@@ -85,9 +88,9 @@
#define CLK_PCM2 278
#define CLK_PWM 279
#define CLK_SPDIF 280
-#define CLK_I2C8 281
-#define CLK_I2C9 282
-#define CLK_I2C10 283
+#define CLK_USI4 281
+#define CLK_USI5 282
+#define CLK_USI6 283
#define CLK_ACLK66_PSGEN 300
#define CLK_CHIPID 301
#define CLK_SYSREG 302
@@ -140,7 +143,8 @@
#define CLK_HDMI 413
#define CLK_ACLK300_DISP1 420
#define CLK_FIMD1 421
-#define CLK_SMMU_FIMD1 422
+#define CLK_SMMU_FIMD1M0 422
+#define CLK_SMMU_FIMD1M1 423
#define CLK_ACLK166 430
#define CLK_MIXER 431
#define CLK_ACLK266 440
@@ -152,6 +156,7 @@
#define CLK_JPEG 451
#define CLK_JPEG2 452
#define CLK_SMMU_JPEG 453
+#define CLK_SMMU_JPEG2 454
#define CLK_ACLK300_GSCL 460
#define CLK_SMMU_GSCL0 461
#define CLK_SMMU_GSCL1 462
@@ -159,7 +164,7 @@
#define CLK_GSCL_WB 464
#define CLK_GSCL0 465
#define CLK_GSCL1 466
-#define CLK_CLK_3AA 467
+#define CLK_FIMC_3AA 467
#define CLK_ACLK266_G2D 470
#define CLK_SSS 471
#define CLK_SLIM_SSS 472
@@ -172,12 +177,32 @@
#define CLK_SMMU_FIMCL1 493
#define CLK_SMMU_FIMCL3 494
#define CLK_FIMC_LITE3 495
+#define CLK_FIMC_LITE0 496
+#define CLK_FIMC_LITE1 497
#define CLK_ACLK_G3D 500
#define CLK_G3D 501
#define CLK_SMMU_MIXER 502
+#define CLK_SMMU_G2D 503
+#define CLK_SMMU_MDMA0 504
+#define CLK_MC 505
+#define CLK_TOP_RTC 506
+#define CLK_SCLK_UART_ISP 510
+#define CLK_SCLK_SPI0_ISP 511
+#define CLK_SCLK_SPI1_ISP 512
+#define CLK_SCLK_PWM_ISP 513
+#define CLK_SCLK_ISP_SENSOR0 514
+#define CLK_SCLK_ISP_SENSOR1 515
+#define CLK_SCLK_ISP_SENSOR2 516
+#define CLK_ACLK432_SCALER 517
+#define CLK_ACLK432_CAM 518
+#define CLK_ACLK_FL1550_CAM 519
+#define CLK_ACLK550_CAM 520
/* mux clocks */
#define CLK_MOUT_HDMI 640
+#define CLK_MOUT_G3D 641
+#define CLK_MOUT_VPLL 642
+#define CLK_MOUT_MAUDIO0 643
/* divider clocks */
#define CLK_DOUT_PIXEL 768
diff --git a/include/dt-bindings/clock/imx6sx-clock.h b/include/dt-bindings/clock/imx6sx-clock.h
new file mode 100644
index 000000000000..421d8bb76f2f
--- /dev/null
+++ b/include/dt-bindings/clock/imx6sx-clock.h
@@ -0,0 +1,256 @@
+/*
+ * Copyright (C) 2014 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_IMX6SX_H
+#define __DT_BINDINGS_CLOCK_IMX6SX_H
+
+#define IMX6SX_CLK_DUMMY 0
+#define IMX6SX_CLK_CKIL 1
+#define IMX6SX_CLK_CKIH 2
+#define IMX6SX_CLK_OSC 3
+#define IMX6SX_CLK_PLL1_SYS 4
+#define IMX6SX_CLK_PLL2_BUS 5
+#define IMX6SX_CLK_PLL3_USB_OTG 6
+#define IMX6SX_CLK_PLL4_AUDIO 7
+#define IMX6SX_CLK_PLL5_VIDEO 8
+#define IMX6SX_CLK_PLL6_ENET 9
+#define IMX6SX_CLK_PLL7_USB_HOST 10
+#define IMX6SX_CLK_USBPHY1 11
+#define IMX6SX_CLK_USBPHY2 12
+#define IMX6SX_CLK_USBPHY1_GATE 13
+#define IMX6SX_CLK_USBPHY2_GATE 14
+#define IMX6SX_CLK_PCIE_REF 15
+#define IMX6SX_CLK_PCIE_REF_125M 16
+#define IMX6SX_CLK_ENET_REF 17
+#define IMX6SX_CLK_PLL2_PFD0 18
+#define IMX6SX_CLK_PLL2_PFD1 19
+#define IMX6SX_CLK_PLL2_PFD2 20
+#define IMX6SX_CLK_PLL2_PFD3 21
+#define IMX6SX_CLK_PLL3_PFD0 22
+#define IMX6SX_CLK_PLL3_PFD1 23
+#define IMX6SX_CLK_PLL3_PFD2 24
+#define IMX6SX_CLK_PLL3_PFD3 25
+#define IMX6SX_CLK_PLL2_198M 26
+#define IMX6SX_CLK_PLL3_120M 27
+#define IMX6SX_CLK_PLL3_80M 28
+#define IMX6SX_CLK_PLL3_60M 29
+#define IMX6SX_CLK_TWD 30
+#define IMX6SX_CLK_PLL4_POST_DIV 31
+#define IMX6SX_CLK_PLL4_AUDIO_DIV 32
+#define IMX6SX_CLK_PLL5_POST_DIV 33
+#define IMX6SX_CLK_PLL5_VIDEO_DIV 34
+#define IMX6SX_CLK_STEP 35
+#define IMX6SX_CLK_PLL1_SW 36
+#define IMX6SX_CLK_OCRAM_SEL 37
+#define IMX6SX_CLK_PERIPH_PRE 38
+#define IMX6SX_CLK_PERIPH2_PRE 39
+#define IMX6SX_CLK_PERIPH_CLK2_SEL 40
+#define IMX6SX_CLK_PERIPH2_CLK2_SEL 41
+#define IMX6SX_CLK_PCIE_AXI_SEL 42
+#define IMX6SX_CLK_GPU_AXI_SEL 43
+#define IMX6SX_CLK_GPU_CORE_SEL 44
+#define IMX6SX_CLK_EIM_SLOW_SEL 45
+#define IMX6SX_CLK_USDHC1_SEL 46
+#define IMX6SX_CLK_USDHC2_SEL 47
+#define IMX6SX_CLK_USDHC3_SEL 48
+#define IMX6SX_CLK_USDHC4_SEL 49
+#define IMX6SX_CLK_SSI1_SEL 50
+#define IMX6SX_CLK_SSI2_SEL 51
+#define IMX6SX_CLK_SSI3_SEL 52
+#define IMX6SX_CLK_QSPI1_SEL 53
+#define IMX6SX_CLK_PERCLK_SEL 54
+#define IMX6SX_CLK_VID_SEL 55
+#define IMX6SX_CLK_ESAI_SEL 56
+#define IMX6SX_CLK_LDB_DI0_DIV_SEL 57
+#define IMX6SX_CLK_LDB_DI1_DIV_SEL 58
+#define IMX6SX_CLK_CAN_SEL 59
+#define IMX6SX_CLK_UART_SEL 60
+#define IMX6SX_CLK_QSPI2_SEL 61
+#define IMX6SX_CLK_LDB_DI1_SEL 62
+#define IMX6SX_CLK_LDB_DI0_SEL 63
+#define IMX6SX_CLK_SPDIF_SEL 64
+#define IMX6SX_CLK_AUDIO_SEL 65
+#define IMX6SX_CLK_ENET_PRE_SEL 66
+#define IMX6SX_CLK_ENET_SEL 67
+#define IMX6SX_CLK_M4_PRE_SEL 68
+#define IMX6SX_CLK_M4_SEL 69
+#define IMX6SX_CLK_ECSPI_SEL 70
+#define IMX6SX_CLK_LCDIF1_PRE_SEL 71
+#define IMX6SX_CLK_LCDIF2_PRE_SEL 72
+#define IMX6SX_CLK_LCDIF1_SEL 73
+#define IMX6SX_CLK_LCDIF2_SEL 74
+#define IMX6SX_CLK_DISPLAY_SEL 75
+#define IMX6SX_CLK_CSI_SEL 76
+#define IMX6SX_CLK_CKO1_SEL 77
+#define IMX6SX_CLK_CKO2_SEL 78
+#define IMX6SX_CLK_CKO 79
+#define IMX6SX_CLK_PERIPH_CLK2 80
+#define IMX6SX_CLK_PERIPH2_CLK2 81
+#define IMX6SX_CLK_IPG 82
+#define IMX6SX_CLK_GPU_CORE_PODF 83
+#define IMX6SX_CLK_GPU_AXI_PODF 84
+#define IMX6SX_CLK_LCDIF1_PODF 85
+#define IMX6SX_CLK_QSPI1_PODF 86
+#define IMX6SX_CLK_EIM_SLOW_PODF 87
+#define IMX6SX_CLK_LCDIF2_PODF 88
+#define IMX6SX_CLK_PERCLK 89
+#define IMX6SX_CLK_VID_PODF 90
+#define IMX6SX_CLK_CAN_PODF 91
+#define IMX6SX_CLK_USDHC1_PODF 92
+#define IMX6SX_CLK_USDHC2_PODF 93
+#define IMX6SX_CLK_USDHC3_PODF 94
+#define IMX6SX_CLK_USDHC4_PODF 95
+#define IMX6SX_CLK_UART_PODF 96
+#define IMX6SX_CLK_ESAI_PRED 97
+#define IMX6SX_CLK_ESAI_PODF 98
+#define IMX6SX_CLK_SSI3_PRED 99
+#define IMX6SX_CLK_SSI3_PODF 100
+#define IMX6SX_CLK_SSI1_PRED 101
+#define IMX6SX_CLK_SSI1_PODF 102
+#define IMX6SX_CLK_QSPI2_PRED 103
+#define IMX6SX_CLK_QSPI2_PODF 104
+#define IMX6SX_CLK_SSI2_PRED 105
+#define IMX6SX_CLK_SSI2_PODF 106
+#define IMX6SX_CLK_SPDIF_PRED 107
+#define IMX6SX_CLK_SPDIF_PODF 108
+#define IMX6SX_CLK_AUDIO_PRED 109
+#define IMX6SX_CLK_AUDIO_PODF 110
+#define IMX6SX_CLK_ENET_PODF 111
+#define IMX6SX_CLK_M4_PODF 112
+#define IMX6SX_CLK_ECSPI_PODF 113
+#define IMX6SX_CLK_LCDIF1_PRED 114
+#define IMX6SX_CLK_LCDIF2_PRED 115
+#define IMX6SX_CLK_DISPLAY_PODF 116
+#define IMX6SX_CLK_CSI_PODF 117
+#define IMX6SX_CLK_LDB_DI0_DIV_3_5 118
+#define IMX6SX_CLK_LDB_DI0_DIV_7 119
+#define IMX6SX_CLK_LDB_DI1_DIV_3_5 120
+#define IMX6SX_CLK_LDB_DI1_DIV_7 121
+#define IMX6SX_CLK_CKO1_PODF 122
+#define IMX6SX_CLK_CKO2_PODF 123
+#define IMX6SX_CLK_PERIPH 124
+#define IMX6SX_CLK_PERIPH2 125
+#define IMX6SX_CLK_OCRAM 126
+#define IMX6SX_CLK_AHB 127
+#define IMX6SX_CLK_MMDC_PODF 128
+#define IMX6SX_CLK_ARM 129
+#define IMX6SX_CLK_AIPS_TZ1 130
+#define IMX6SX_CLK_AIPS_TZ2 131
+#define IMX6SX_CLK_APBH_DMA 132
+#define IMX6SX_CLK_ASRC_GATE 133
+#define IMX6SX_CLK_CAAM_MEM 134
+#define IMX6SX_CLK_CAAM_ACLK 135
+#define IMX6SX_CLK_CAAM_IPG 136
+#define IMX6SX_CLK_CAN1_IPG 137
+#define IMX6SX_CLK_CAN1_SERIAL 138
+#define IMX6SX_CLK_CAN2_IPG 139
+#define IMX6SX_CLK_CAN2_SERIAL 140
+#define IMX6SX_CLK_CPU_DEBUG 141
+#define IMX6SX_CLK_DCIC1 142
+#define IMX6SX_CLK_DCIC2 143
+#define IMX6SX_CLK_AIPS_TZ3 144
+#define IMX6SX_CLK_ECSPI1 145
+#define IMX6SX_CLK_ECSPI2 146
+#define IMX6SX_CLK_ECSPI3 147
+#define IMX6SX_CLK_ECSPI4 148
+#define IMX6SX_CLK_ECSPI5 149
+#define IMX6SX_CLK_EPIT1 150
+#define IMX6SX_CLK_EPIT2 151
+#define IMX6SX_CLK_ESAI_EXTAL 152
+#define IMX6SX_CLK_WAKEUP 153
+#define IMX6SX_CLK_GPT_BUS 154
+#define IMX6SX_CLK_GPT_SERIAL 155
+#define IMX6SX_CLK_GPU 156
+#define IMX6SX_CLK_OCRAM_S 157
+#define IMX6SX_CLK_CANFD 158
+#define IMX6SX_CLK_CSI 159
+#define IMX6SX_CLK_I2C1 160
+#define IMX6SX_CLK_I2C2 161
+#define IMX6SX_CLK_I2C3 162
+#define IMX6SX_CLK_OCOTP 163
+#define IMX6SX_CLK_IOMUXC 164
+#define IMX6SX_CLK_IPMUX1 165
+#define IMX6SX_CLK_IPMUX2 166
+#define IMX6SX_CLK_IPMUX3 167
+#define IMX6SX_CLK_TZASC1 168
+#define IMX6SX_CLK_LCDIF_APB 169
+#define IMX6SX_CLK_PXP_AXI 170
+#define IMX6SX_CLK_M4 171
+#define IMX6SX_CLK_ENET 172
+#define IMX6SX_CLK_DISPLAY_AXI 173
+#define IMX6SX_CLK_LCDIF2_PIX 174
+#define IMX6SX_CLK_LCDIF1_PIX 175
+#define IMX6SX_CLK_LDB_DI0 176
+#define IMX6SX_CLK_QSPI1 177
+#define IMX6SX_CLK_MLB 178
+#define IMX6SX_CLK_MMDC_P0_FAST 179
+#define IMX6SX_CLK_MMDC_P0_IPG 180
+#define IMX6SX_CLK_AXI 181
+#define IMX6SX_CLK_PCIE_AXI 182
+#define IMX6SX_CLK_QSPI2 183
+#define IMX6SX_CLK_PER1_BCH 184
+#define IMX6SX_CLK_PER2_MAIN 185
+#define IMX6SX_CLK_PWM1 186
+#define IMX6SX_CLK_PWM2 187
+#define IMX6SX_CLK_PWM3 188
+#define IMX6SX_CLK_PWM4 189
+#define IMX6SX_CLK_GPMI_BCH_APB 190
+#define IMX6SX_CLK_GPMI_BCH 191
+#define IMX6SX_CLK_GPMI_IO 192
+#define IMX6SX_CLK_GPMI_APB 193
+#define IMX6SX_CLK_ROM 194
+#define IMX6SX_CLK_SDMA 195
+#define IMX6SX_CLK_SPBA 196
+#define IMX6SX_CLK_SPDIF 197
+#define IMX6SX_CLK_SSI1_IPG 198
+#define IMX6SX_CLK_SSI2_IPG 199
+#define IMX6SX_CLK_SSI3_IPG 200
+#define IMX6SX_CLK_SSI1 201
+#define IMX6SX_CLK_SSI2 202
+#define IMX6SX_CLK_SSI3 203
+#define IMX6SX_CLK_UART_IPG 204
+#define IMX6SX_CLK_UART_SERIAL 205
+#define IMX6SX_CLK_SAI1 206
+#define IMX6SX_CLK_SAI2 207
+#define IMX6SX_CLK_USBOH3 208
+#define IMX6SX_CLK_USDHC1 209
+#define IMX6SX_CLK_USDHC2 210
+#define IMX6SX_CLK_USDHC3 211
+#define IMX6SX_CLK_USDHC4 212
+#define IMX6SX_CLK_EIM_SLOW 213
+#define IMX6SX_CLK_PWM8 214
+#define IMX6SX_CLK_VADC 215
+#define IMX6SX_CLK_GIS 216
+#define IMX6SX_CLK_I2C4 217
+#define IMX6SX_CLK_PWM5 218
+#define IMX6SX_CLK_PWM6 219
+#define IMX6SX_CLK_PWM7 220
+#define IMX6SX_CLK_CKO1 221
+#define IMX6SX_CLK_CKO2 222
+#define IMX6SX_CLK_IPP_DI0 223
+#define IMX6SX_CLK_IPP_DI1 224
+#define IMX6SX_CLK_ENET_AHB 225
+#define IMX6SX_CLK_OCRAM_PODF 226
+#define IMX6SX_CLK_GPT_3M 227
+#define IMX6SX_CLK_ENET_PTP 228
+#define IMX6SX_CLK_ENET_PTP_REF 229
+#define IMX6SX_CLK_ENET2_REF 230
+#define IMX6SX_CLK_ENET2_REF_125M 231
+#define IMX6SX_CLK_AUDIO 232
+#define IMX6SX_CLK_LVDS1_SEL 233
+#define IMX6SX_CLK_LVDS1_OUT 234
+#define IMX6SX_CLK_ASRC_IPG 235
+#define IMX6SX_CLK_ASRC_MEM 236
+#define IMX6SX_CLK_SAI1_IPG 237
+#define IMX6SX_CLK_SAI2_IPG 238
+#define IMX6SX_CLK_ESAI_IPG 239
+#define IMX6SX_CLK_ESAI_MEM 240
+#define IMX6SX_CLK_CLK_END 241
+
+#endif /* __DT_BINDINGS_CLOCK_IMX6SX_H */
diff --git a/include/dt-bindings/clock/lsi,axm5516-clks.h b/include/dt-bindings/clock/lsi,axm5516-clks.h
new file mode 100644
index 000000000000..beb41ace5dd6
--- /dev/null
+++ b/include/dt-bindings/clock/lsi,axm5516-clks.h
@@ -0,0 +1,36 @@
+/*
+ * Copyright (c) 2014 LSI Corporation
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ */
+
+#ifndef _DT_BINDINGS_CLK_AXM5516_H
+#define _DT_BINDINGS_CLK_AXM5516_H
+
+#define AXXIA_CLK_FAB_PLL 0
+#define AXXIA_CLK_CPU_PLL 1
+#define AXXIA_CLK_SYS_PLL 2
+#define AXXIA_CLK_SM0_PLL 3
+#define AXXIA_CLK_SM1_PLL 4
+#define AXXIA_CLK_FAB_DIV 5
+#define AXXIA_CLK_SYS_DIV 6
+#define AXXIA_CLK_NRCP_DIV 7
+#define AXXIA_CLK_CPU0_DIV 8
+#define AXXIA_CLK_CPU1_DIV 9
+#define AXXIA_CLK_CPU2_DIV 10
+#define AXXIA_CLK_CPU3_DIV 11
+#define AXXIA_CLK_PER_DIV 12
+#define AXXIA_CLK_MMC_DIV 13
+#define AXXIA_CLK_FAB 14
+#define AXXIA_CLK_SYS 15
+#define AXXIA_CLK_NRCP 16
+#define AXXIA_CLK_CPU0 17
+#define AXXIA_CLK_CPU1 18
+#define AXXIA_CLK_CPU2 19
+#define AXXIA_CLK_CPU3 20
+#define AXXIA_CLK_PER 21
+#define AXXIA_CLK_MMC 22
+
+#endif
diff --git a/include/dt-bindings/clock/r8a7790-clock.h b/include/dt-bindings/clock/r8a7790-clock.h
index 6548a5fbcf4a..9a7c4c5a35d1 100644
--- a/include/dt-bindings/clock/r8a7790-clock.h
+++ b/include/dt-bindings/clock/r8a7790-clock.h
@@ -33,8 +33,8 @@
#define R8A7790_CLK_TMU0 25
#define R8A7790_CLK_VSP1_DU1 27
#define R8A7790_CLK_VSP1_DU0 28
-#define R8A7790_CLK_VSP1_RT 30
-#define R8A7790_CLK_VSP1_SY 31
+#define R8A7790_CLK_VSP1_R 30
+#define R8A7790_CLK_VSP1_S 31
/* MSTP2 */
#define R8A7790_CLK_SCIFA2 2
diff --git a/include/dt-bindings/clock/r8a7791-clock.h b/include/dt-bindings/clock/r8a7791-clock.h
index 30f82f286e29..c3b0130f56c8 100644
--- a/include/dt-bindings/clock/r8a7791-clock.h
+++ b/include/dt-bindings/clock/r8a7791-clock.h
@@ -32,7 +32,7 @@
#define R8A7791_CLK_TMU0 25
#define R8A7791_CLK_VSP1_DU1 27
#define R8A7791_CLK_VSP1_DU0 28
-#define R8A7791_CLK_VSP1_SY 31
+#define R8A7791_CLK_VSP1_S 31
/* MSTP2 */
#define R8A7791_CLK_SCIFA2 2
@@ -43,7 +43,8 @@
#define R8A7791_CLK_SCIFB1 7
#define R8A7791_CLK_MSIOF1 8
#define R8A7791_CLK_SCIFB2 16
-#define R8A7791_CLK_DMAC 18
+#define R8A7791_CLK_SYS_DMAC1 18
+#define R8A7791_CLK_SYS_DMAC0 19
/* MSTP3 */
#define R8A7791_CLK_TPU0 4
diff --git a/include/dt-bindings/pinctrl/omap.h b/include/dt-bindings/pinctrl/omap.h
index b04528cd033c..404ba7ef7813 100644
--- a/include/dt-bindings/pinctrl/omap.h
+++ b/include/dt-bindings/pinctrl/omap.h
@@ -69,5 +69,17 @@
#define OMAP5_WKUP_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0xc840) (val)
#define DRA7XX_CORE_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x3400) (val)
+/*
+ * Define some commonly used pins configured by the boards.
+ * Note that some boards use alternative pins, so check
+ * the schematics before using these.
+ */
+#define OMAP3_UART1_RX 0x152
+#define OMAP3_UART2_RX 0x14a
+#define OMAP3_UART3_RX 0x16e
+#define OMAP4_UART2_RX 0xdc
+#define OMAP4_UART3_RX 0x104
+#define OMAP4_UART4_RX 0x11c
+
#endif
diff --git a/include/linux/clk/at91_pmc.h b/include/linux/clk/at91_pmc.h
index a6911ebbd02a..de4268d4987a 100644
--- a/include/linux/clk/at91_pmc.h
+++ b/include/linux/clk/at91_pmc.h
@@ -155,6 +155,7 @@ extern void __iomem *at91_pmc_base;
#define AT91_PMC_LOCKB (1 << 2) /* PLLB Lock */
#define AT91_PMC_MCKRDY (1 << 3) /* Master Clock */
#define AT91_PMC_LOCKU (1 << 6) /* UPLL Lock [some SAM9] */
+#define AT91_PMC_OSCSEL (1 << 7) /* Slow Oscillator Selection [some SAM9] */
#define AT91_PMC_PCK0RDY (1 << 8) /* Programmable Clock 0 */
#define AT91_PMC_PCK1RDY (1 << 9) /* Programmable Clock 1 */
#define AT91_PMC_PCK2RDY (1 << 10) /* Programmable Clock 2 */
diff --git a/include/linux/mbus.h b/include/linux/mbus.h
index 345b8c53b897..550c88fb0267 100644
--- a/include/linux/mbus.h
+++ b/include/linux/mbus.h
@@ -73,6 +73,6 @@ int mvebu_mbus_del_window(phys_addr_t base, size_t size);
int mvebu_mbus_init(const char *soc, phys_addr_t mbus_phys_base,
size_t mbus_size, phys_addr_t sdram_phys_base,
size_t sdram_size);
-int mvebu_mbus_dt_init(void);
+int mvebu_mbus_dt_init(bool is_coherent);
#endif /* __LINUX_MBUS_H */
diff --git a/include/linux/platform_data/at91_adc.h b/include/linux/platform_data/at91_adc.h
index b3ca1e94e0c8..7819fc787731 100644
--- a/include/linux/platform_data/at91_adc.h
+++ b/include/linux/platform_data/at91_adc.h
@@ -7,23 +7,10 @@
#ifndef _AT91_ADC_H_
#define _AT91_ADC_H_
-/**
- * struct at91_adc_reg_desc - Various informations relative to registers
- * @channel_base: Base offset for the channel data registers
- * @drdy_mask: Mask of the DRDY field in the relevant registers
- (Interruptions registers mostly)
- * @status_register: Offset of the Interrupt Status Register
- * @trigger_register: Offset of the Trigger setup register
- * @mr_prescal_mask: Mask of the PRESCAL field in the adc MR register
- * @mr_startup_mask: Mask of the STARTUP field in the adc MR register
- */
-struct at91_adc_reg_desc {
- u8 channel_base;
- u32 drdy_mask;
- u8 status_register;
- u8 trigger_register;
- u32 mr_prescal_mask;
- u32 mr_startup_mask;
+enum atmel_adc_ts_type {
+ ATMEL_ADC_TOUCHSCREEN_NONE = 0,
+ ATMEL_ADC_TOUCHSCREEN_4WIRE = 4,
+ ATMEL_ADC_TOUCHSCREEN_5WIRE = 5,
};
/**
@@ -42,23 +29,21 @@ struct at91_adc_trigger {
/**
* struct at91_adc_data - platform data for ADC driver
* @channels_used: channels in use on the board as a bitmask
- * @num_channels: global number of channels available on the board
- * @registers: Registers definition on the board
* @startup_time: startup time of the ADC in microseconds
* @trigger_list: Triggers available in the ADC
* @trigger_number: Number of triggers available in the ADC
* @use_external_triggers: does the board has external triggers availables
* @vref: Reference voltage for the ADC in millivolts
+ * @touchscreen_type: If a touchscreen is connected, its type (4 or 5 wires)
*/
struct at91_adc_data {
unsigned long channels_used;
- u8 num_channels;
- struct at91_adc_reg_desc *registers;
u8 startup_time;
struct at91_adc_trigger *trigger_list;
u8 trigger_number;
bool use_external_triggers;
u16 vref;
+ enum atmel_adc_ts_type touchscreen_type;
};
extern void __init at91_add_device_adc(struct at91_adc_data *data);
diff --git a/include/linux/platform_data/atmel.h b/include/linux/platform_data/atmel.h
index e26b0c14edea..1466443797d7 100644
--- a/include/linux/platform_data/atmel.h
+++ b/include/linux/platform_data/atmel.h
@@ -87,13 +87,6 @@ struct atmel_uart_data {
int rts_gpio; /* optional RTS GPIO */
};
- /* Touchscreen Controller */
-struct at91_tsadcc_data {
- unsigned int adc_clock;
- u8 pendet_debounce;
- u8 ts_sample_hold_time;
-};
-
/* CAN */
struct at91_can_data {
void (*transceiver_switch)(int on);
diff --git a/sound/soc/atmel/sam9g20_wm8731.c b/sound/soc/atmel/sam9g20_wm8731.c
index 174bd546c08b..bb1149126c54 100644
--- a/sound/soc/atmel/sam9g20_wm8731.c
+++ b/sound/soc/atmel/sam9g20_wm8731.c
@@ -48,7 +48,6 @@
#include <asm/mach-types.h>
#include <mach/hardware.h>
-#include <mach/gpio.h>
#include "../codecs/wm8731.h"
#include "atmel-pcm.h"