diff options
author | Srinath Mannam <srinath.mannam@broadcom.com> | 2017-06-08 17:01:39 +0530 |
---|---|---|
committer | Kishon Vijay Abraham I <kishon@ti.com> | 2017-06-16 11:40:22 +0530 |
commit | 80886f7c698fd64366a6eced011ec82f4daf968b (patch) | |
tree | 6757715f14ac6501a488aab139e1fb3018f692fb | |
parent | 3ac255bc8e9716ba581d10764aaf957f9f8dd187 (diff) | |
download | linux-80886f7c698fd64366a6eced011ec82f4daf968b.tar.bz2 |
phy: Add stingray SATA phy support
This patch adds support for stingray SATA phy in the
SATA BRCM phy driver.
Signed-off-by: Srinath Mannam <srinath.mannam@broadcom.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
-rw-r--r-- | drivers/phy/broadcom/phy-brcm-sata.c | 73 |
1 files changed, 73 insertions, 0 deletions
diff --git a/drivers/phy/broadcom/phy-brcm-sata.c b/drivers/phy/broadcom/phy-brcm-sata.c index ccbc3d994998..e6544c8b1ace 100644 --- a/drivers/phy/broadcom/phy-brcm-sata.c +++ b/drivers/phy/broadcom/phy-brcm-sata.c @@ -46,6 +46,7 @@ enum brcm_sata_phy_version { BRCM_SATA_PHY_STB_40NM, BRCM_SATA_PHY_IPROC_NS2, BRCM_SATA_PHY_IPROC_NSP, + BRCM_SATA_PHY_IPROC_SR, }; struct brcm_sata_port { @@ -81,12 +82,17 @@ enum sata_phy_regs { PLL_ACTRL2 = 0x8b, PLL_ACTRL2_SELDIV_MASK = 0x1f, PLL_ACTRL2_SELDIV_SHIFT = 9, + PLL_ACTRL6 = 0x86, PLL1_REG_BANK = 0x060, PLL1_ACTRL2 = 0x82, PLL1_ACTRL3 = 0x83, PLL1_ACTRL4 = 0x84, + TX_REG_BANK = 0x070, + TX_ACTRL0 = 0x80, + TX_ACTRL0_TXPOL_FLIP = BIT(6), + OOB_REG_BANK = 0x150, OOB1_REG_BANK = 0x160, OOB_CTRL1 = 0x80, @@ -347,6 +353,68 @@ static int brcm_nsp_sata_init(struct brcm_sata_port *port) return 0; } +/* SR PHY PLL0 registers */ +#define SR_PLL0_ACTRL6_MAGIC 0xa + +/* SR PHY PLL1 registers */ +#define SR_PLL1_ACTRL2_MAGIC 0x32 +#define SR_PLL1_ACTRL3_MAGIC 0x2 +#define SR_PLL1_ACTRL4_MAGIC 0x3e8 + +static int brcm_sr_sata_init(struct brcm_sata_port *port) +{ + struct brcm_sata_phy *priv = port->phy_priv; + struct device *dev = port->phy_priv->dev; + void __iomem *base = priv->phy_base; + unsigned int val, try; + + /* Configure PHY PLL register bank 1 */ + val = SR_PLL1_ACTRL2_MAGIC; + brcm_sata_phy_wr(base, PLL1_REG_BANK, PLL1_ACTRL2, 0x0, val); + val = SR_PLL1_ACTRL3_MAGIC; + brcm_sata_phy_wr(base, PLL1_REG_BANK, PLL1_ACTRL3, 0x0, val); + val = SR_PLL1_ACTRL4_MAGIC; + brcm_sata_phy_wr(base, PLL1_REG_BANK, PLL1_ACTRL4, 0x0, val); + + /* Configure PHY PLL register bank 0 */ + val = SR_PLL0_ACTRL6_MAGIC; + brcm_sata_phy_wr(base, PLL_REG_BANK_0, PLL_ACTRL6, 0x0, val); + + /* Wait for PHY PLL lock by polling pll_lock bit */ + try = 50; + do { + val = brcm_sata_phy_rd(base, BLOCK0_REG_BANK, + BLOCK0_XGXSSTATUS); + if (val & BLOCK0_XGXSSTATUS_PLL_LOCK) + break; + msleep(20); + try--; + } while (try); + + if ((val & BLOCK0_XGXSSTATUS_PLL_LOCK) == 0) { + /* PLL did not lock; give up */ + dev_err(dev, "port%d PLL did not lock\n", port->portnum); + return -ETIMEDOUT; + } + + /* Invert Tx polarity */ + brcm_sata_phy_wr(base, TX_REG_BANK, TX_ACTRL0, + ~TX_ACTRL0_TXPOL_FLIP, TX_ACTRL0_TXPOL_FLIP); + + /* Configure OOB control to handle 100MHz reference clock */ + val = ((0xc << OOB_CTRL1_BURST_MAX_SHIFT) | + (0x4 << OOB_CTRL1_BURST_MIN_SHIFT) | + (0x8 << OOB_CTRL1_WAKE_IDLE_MAX_SHIFT) | + (0x3 << OOB_CTRL1_WAKE_IDLE_MIN_SHIFT)); + brcm_sata_phy_wr(base, OOB_REG_BANK, OOB_CTRL1, 0x0, val); + val = ((0x1b << OOB_CTRL2_RESET_IDLE_MAX_SHIFT) | + (0x2 << OOB_CTRL2_BURST_CNT_SHIFT) | + (0x9 << OOB_CTRL2_RESET_IDLE_MIN_SHIFT)); + brcm_sata_phy_wr(base, OOB_REG_BANK, OOB_CTRL2, 0x0, val); + + return 0; +} + static int brcm_sata_phy_init(struct phy *phy) { int rc; @@ -363,6 +431,9 @@ static int brcm_sata_phy_init(struct phy *phy) case BRCM_SATA_PHY_IPROC_NSP: rc = brcm_nsp_sata_init(port); break; + case BRCM_SATA_PHY_IPROC_SR: + rc = brcm_sr_sata_init(port); + break; default: rc = -ENODEV; } @@ -384,6 +455,8 @@ static const struct of_device_id brcm_sata_phy_of_match[] = { .data = (void *)BRCM_SATA_PHY_IPROC_NS2 }, { .compatible = "brcm,iproc-nsp-sata-phy", .data = (void *)BRCM_SATA_PHY_IPROC_NSP }, + { .compatible = "brcm,iproc-sr-sata-phy", + .data = (void *)BRCM_SATA_PHY_IPROC_SR }, {}, }; MODULE_DEVICE_TABLE(of, brcm_sata_phy_of_match); |