dt-bindings: pinctrl: sh-pfc: Convert to json-schema

Convert the Renesas Pin Function Controller (PFC) Device Tree binding
documentation to json-schema.

Document missing properties.
Drop deprecated and obsolete #gpio-range-cells property.
Update the example to match reality.
Drop consumer examples, as they do not belong here.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20200821112208.5295-1-geert+renesas@glider.be

2 files changed, 193 insertions, 188 deletions

diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt
deleted file mode 100644
index d75476e24514..000000000000
--- a/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt
+++ /dev/null
@@ -1,188 +0,0 @@
-* Renesas Pin Function Controller (GPIO and Pin Mux/Config)
-
-The Pin Function Controller (PFC) is a Pin Mux/Config controller. On SH73A0,
-R8A73A4 and R8A7740 it also acts as a GPIO controller.
-
-
-Pin Control
------------
-
-Required Properties:
-
-  - compatible: should be one of the following.
-    - "renesas,pfc-emev2": for EMEV2 (EMMA Mobile EV2) compatible pin-controller.
-    - "renesas,pfc-r8a73a4": for R8A73A4 (R-Mobile APE6) compatible pin-controller.
-    - "renesas,pfc-r8a7740": for R8A7740 (R-Mobile A1) compatible pin-controller.
-    - "renesas,pfc-r8a7742": for R8A7742 (RZ/G1H) compatible pin-controller.
-    - "renesas,pfc-r8a7743": for R8A7743 (RZ/G1M) compatible pin-controller.
-    - "renesas,pfc-r8a7744": for R8A7744 (RZ/G1N) compatible pin-controller.
-    - "renesas,pfc-r8a7745": for R8A7745 (RZ/G1E) compatible pin-controller.
-    - "renesas,pfc-r8a77470": for R8A77470 (RZ/G1C) compatible pin-controller.
-    - "renesas,pfc-r8a774a1": for R8A774A1 (RZ/G2M) compatible pin-controller.
-    - "renesas,pfc-r8a774b1": for R8A774B1 (RZ/G2N) compatible pin-controller.
-    - "renesas,pfc-r8a774c0": for R8A774C0 (RZ/G2E) compatible pin-controller.
-    - "renesas,pfc-r8a774e1": for R8A774E1 (RZ/G2H) compatible pin-controller.
-    - "renesas,pfc-r8a7778": for R8A7778 (R-Car M1) compatible pin-controller.
-    - "renesas,pfc-r8a7779": for R8A7779 (R-Car H1) compatible pin-controller.
-    - "renesas,pfc-r8a7790": for R8A7790 (R-Car H2) compatible pin-controller.
-    - "renesas,pfc-r8a7791": for R8A7791 (R-Car M2-W) compatible pin-controller.
-    - "renesas,pfc-r8a7792": for R8A7792 (R-Car V2H) compatible pin-controller.
-    - "renesas,pfc-r8a7793": for R8A7793 (R-Car M2-N) compatible pin-controller.
-    - "renesas,pfc-r8a7794": for R8A7794 (R-Car E2) compatible pin-controller.
-    - "renesas,pfc-r8a7795": for R8A7795 (R-Car H3) compatible pin-controller.
-    - "renesas,pfc-r8a7796": for R8A77960 (R-Car M3-W) compatible pin-controller.
-    - "renesas,pfc-r8a77961": for R8A77961 (R-Car M3-W+) compatible pin-controller.
-    - "renesas,pfc-r8a77965": for R8A77965 (R-Car M3-N) compatible pin-controller.
-    - "renesas,pfc-r8a77970": for R8A77970 (R-Car V3M) compatible pin-controller.
-    - "renesas,pfc-r8a77980": for R8A77980 (R-Car V3H) compatible pin-controller.
-    - "renesas,pfc-r8a77990": for R8A77990 (R-Car E3) compatible pin-controller.
-    - "renesas,pfc-r8a77995": for R8A77995 (R-Car D3) compatible pin-controller.
-    - "renesas,pfc-sh73a0": for SH73A0 (SH-Mobile AG5) compatible pin-controller.
-
-  - reg: Base address and length of each memory resource used by the pin
-    controller hardware module.
-
-Optional properties:
-
-  - #gpio-range-cells: Mandatory when the PFC doesn't handle GPIO, forbidden
-    otherwise. Should be 3.
-
-  - interrupts-extended: Specify the interrupts associated with external
-    IRQ pins. This property is mandatory when the PFC handles GPIOs and
-    forbidden otherwise. When specified, it must contain one interrupt per
-    external IRQ, sorted by external IRQ number.
-
-The PFC node also acts as a container for pin configuration nodes. Please refer
-to pinctrl-bindings.txt in this directory for the definition of the term "pin
-configuration node" and for the common pinctrl bindings used by client devices.
-
-Each pin configuration node represents a desired configuration for a pin, a
-pin group, or a list of pins or pin groups. The configuration can include the
-function to select on those pin(s) and pin configuration parameters (such as
-pull-up and pull-down).
-
-Pin configuration nodes contain pin configuration properties, either directly
-or grouped in child subnodes. Both pin muxing and configuration parameters can
-be grouped in that way and referenced as a single pin configuration node by
-client devices.
-
-A configuration node or subnode must reference at least one pin (through the
-pins or pin groups properties) and contain at least a function or one
-configuration parameter. When the function is present only pin groups can be
-used to reference pins.
-
-All pin configuration nodes and subnodes names are ignored. All of those nodes
-are parsed through phandles and processed purely based on their content.
-
-Pin Configuration Node Properties:
-
-- pins : An array of strings, each string containing the name of a pin.
-- groups : An array of strings, each string containing the name of a pin
-  group.
-
-- function: A string containing the name of the function to mux to the pin
-  group(s) specified by the groups property.
-
-  Valid values for pin, group and function names can be found in the group and
-  function arrays of the PFC data file corresponding to the SoC
-  (drivers/pinctrl/sh-pfc/pfc-*.c)
-
-The pin configuration parameters use the generic pinconf bindings defined in
-pinctrl-bindings.txt in this directory. The supported parameters are
-bias-disable, bias-pull-up, bias-pull-down, drive-strength and power-source. For
-pins that have a configurable I/O voltage, the power-source value should be the
-nominal I/O voltage in millivolts.
-
-
-GPIO
-----
-
-On SH73A0, R8A73A4 and R8A7740 the PFC node is also a GPIO controller node.
-
-Required Properties:
-
-  - gpio-controller: Marks the device node as a gpio controller.
-
-  - #gpio-cells: Should be 2. The first cell is the GPIO number and the second
-    cell specifies GPIO flags, as defined in <dt-bindings/gpio/gpio.h>. Only the
-    GPIO_ACTIVE_HIGH and GPIO_ACTIVE_LOW flags are supported.
-
-The syntax of the gpio specifier used by client nodes should be the following
-with values derived from the SoC user manual.
-
-  <[phandle of the gpio controller node]
-   [pin number within the gpio controller]
-   [flags]>
-
-On other mach-shmobile platforms GPIO is handled by the gpio-rcar driver.
-Please refer to Documentation/devicetree/bindings/gpio/renesas,rcar-gpio.yaml
-for documentation of the GPIO device tree bindings on those platforms.
-
-
-Examples
---------
-
-Example 1: SH73A0 (SH-Mobile AG5) pin controller node
-
-	pfc: pin-controller@e6050000 {
-		compatible = "renesas,pfc-sh73a0";
-		reg = <0xe6050000 0x8000>,
-		      <0xe605801c 0x1c>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupts-extended =
-			<&irqpin0 0 0>, <&irqpin0 1 0>, <&irqpin0 2 0>, <&irqpin0 3 0>,
-			<&irqpin0 4 0>, <&irqpin0 5 0>, <&irqpin0 6 0>, <&irqpin0 7 0>,
-			<&irqpin1 0 0>, <&irqpin1 1 0>, <&irqpin1 2 0>, <&irqpin1 3 0>,
-			<&irqpin1 4 0>, <&irqpin1 5 0>, <&irqpin1 6 0>, <&irqpin1 7 0>,
-			<&irqpin2 0 0>, <&irqpin2 1 0>, <&irqpin2 2 0>, <&irqpin2 3 0>,
-			<&irqpin2 4 0>, <&irqpin2 5 0>, <&irqpin2 6 0>, <&irqpin2 7 0>,
-			<&irqpin3 0 0>, <&irqpin3 1 0>, <&irqpin3 2 0>, <&irqpin3 3 0>,
-			<&irqpin3 4 0>, <&irqpin3 5 0>, <&irqpin3 6 0>, <&irqpin3 7 0>;
-	};
-
-Example 2: A GPIO LED node that references a GPIO
-
-	#include <dt-bindings/gpio/gpio.h>
-
-	leds {
-		compatible = "gpio-leds";
-		led1 {
-			gpios = <&pfc 20 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-Example 3: KZM-A9-GT (SH-Mobile AG5) default pin state hog and pin control maps
-           for the MMCIF and SCIFA4 devices
-
-	&pfc {
-		pinctrl-0 = <&scifa4_pins>;
-		pinctrl-names = "default";
-
-		mmcif_pins: mmcif {
-			mux {
-				groups = "mmc0_data8_0", "mmc0_ctrl_0";
-				function = "mmc0";
-			};
-			cfg {
-				groups = "mmc0_data8_0";
-				pins = "PORT279";
-				bias-pull-up;
-			};
-		};
-
-		scifa4_pins: scifa4 {
-			groups = "scifa4_data", "scifa4_ctrl";
-			function = "scifa4";
-		};
-	};
-
-Example 4: KZM-A9-GT (SH-Mobile AG5) default pin state for the MMCIF device
-
-	&mmcif {
-		pinctrl-0 = <&mmcif_pins>;
-		pinctrl-names = "default";
-
-		bus-width = <8>;
-		vmmc-supply = <&reg_1p8v>;
-	};
diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,pfc.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,pfc.yaml
new file mode 100644
index 000000000000..4efe117550bd
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/renesas,pfc.yaml
@@ -0,0 +1,193 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/renesas,pfc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas Pin Function Controller (GPIO and Pin Mux/Config)
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+
+description:
+  The Pin Function Controller (PFC) is a Pin Mux/Config controller.
+  On SH/R-Mobile SoCs it also acts as a GPIO controller.
+
+properties:
+  compatible:
+    enum:
+      - renesas,pfc-emev2       # EMMA Mobile EV2
+      - renesas,pfc-r8a73a4     # R-Mobile APE6
+      - renesas,pfc-r8a7740     # R-Mobile A1
+      - renesas,pfc-r8a7742     # RZ/G1H
+      - renesas,pfc-r8a7743     # RZ/G1M
+      - renesas,pfc-r8a7744     # RZ/G1N
+      - renesas,pfc-r8a7745     # RZ/G1E
+      - renesas,pfc-r8a77470    # RZ/G1C
+      - renesas,pfc-r8a774a1    # RZ/G2M
+      - renesas,pfc-r8a774b1    # RZ/G2N
+      - renesas,pfc-r8a774c0    # RZ/G2E
+      - renesas,pfc-r8a774e1    # RZ/G2H
+      - renesas,pfc-r8a7778     # R-Car M1
+      - renesas,pfc-r8a7779     # R-Car H1
+      - renesas,pfc-r8a7790     # R-Car H2
+      - renesas,pfc-r8a7791     # R-Car M2-W
+      - renesas,pfc-r8a7792     # R-Car V2H
+      - renesas,pfc-r8a7793     # R-Car M2-N
+      - renesas,pfc-r8a7794     # R-Car E2
+      - renesas,pfc-r8a7795     # R-Car H3
+      - renesas,pfc-r8a7796     # R-Car M3-W
+      - renesas,pfc-r8a77961    # R-Car M3-W+
+      - renesas,pfc-r8a77965    # R-Car M3-N
+      - renesas,pfc-r8a77970    # R-Car V3M
+      - renesas,pfc-r8a77980    # R-Car V3H
+      - renesas,pfc-r8a77990    # R-Car E3
+      - renesas,pfc-r8a77995    # R-Car D3
+      - renesas,pfc-sh73a0      # SH-Mobile AG5
+
+  reg:
+    minItems: 1
+    maxItems: 2
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+
+  gpio-ranges:
+    minItems: 1
+    maxItems: 16
+
+  interrupts-extended:
+    minItems: 32
+    maxItems: 64
+    description:
+      Specify the interrupts associated with external IRQ pins on SoCs where
+      the PFC acts as a GPIO controller.  It must contain one interrupt per
+      external IRQ, sorted by external IRQ number.
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+if:
+  properties:
+    compatible:
+      items:
+        enum:
+          - renesas,pfc-r8a73a4
+          - renesas,pfc-r8a7740
+          - renesas,pfc-sh73a0
+then:
+  required:
+    - interrupts-extended
+    - gpio-controller
+    - '#gpio-cells'
+    - gpio-ranges
+    - power-domains
+
+additionalProperties:
+  anyOf:
+    - type: object
+      allOf:
+        - $ref: pincfg-node.yaml#
+        - $ref: pinmux-node.yaml#
+
+      description:
+        Pin controller client devices use pin configuration subnodes (children
+        and grandchildren) for desired pin configuration.
+        Client device subnodes use below standard properties.
+
+      properties:
+        phandle: true
+        function: true
+        groups: true
+        pins: true
+        bias-disable: true
+        bias-pull-down: true
+        bias-pull-up: true
+        drive-strength:
+          enum: [ 3, 6, 9, 12, 15, 18, 21, 24 ] # Superset of supported values
+        power-source:
+          enum: [ 1800, 3300 ]
+        gpio-hog: true
+        gpios: true
+        input: true
+        output-high: true
+        output-low: true
+
+      additionalProperties: false
+
+    - type: object
+      properties:
+        phandle: true
+
+      additionalProperties:
+        $ref: "#/additionalProperties/anyOf/0"
+
+examples:
+  - |
+    pfc: pinctrl@e6050000 {
+            compatible = "renesas,pfc-r8a7740";
+            reg = <0xe6050000 0x8000>,
+                  <0xe605800c 0x20>;
+            gpio-controller;
+            #gpio-cells = <2>;
+            gpio-ranges = <&pfc 0 0 212>;
+            interrupts-extended =
+                <&irqpin0 0 0>, <&irqpin0 1 0>, <&irqpin0 2 0>, <&irqpin0 3 0>,
+                <&irqpin0 4 0>, <&irqpin0 5 0>, <&irqpin0 6 0>, <&irqpin0 7 0>,
+                <&irqpin1 0 0>, <&irqpin1 1 0>, <&irqpin1 2 0>, <&irqpin1 3 0>,
+                <&irqpin1 4 0>, <&irqpin1 5 0>, <&irqpin1 6 0>, <&irqpin1 7 0>,
+                <&irqpin2 0 0>, <&irqpin2 1 0>, <&irqpin2 2 0>, <&irqpin2 3 0>,
+                <&irqpin2 4 0>, <&irqpin2 5 0>, <&irqpin2 6 0>, <&irqpin2 7 0>,
+                <&irqpin3 0 0>, <&irqpin3 1 0>, <&irqpin3 2 0>, <&irqpin3 3 0>,
+                <&irqpin3 4 0>, <&irqpin3 5 0>, <&irqpin3 6 0>, <&irqpin3 7 0>;
+            power-domains = <&pd_c5>;
+
+            lcd0_mux {
+                    /* DBGMD/LCDC0/FSIA MUX */
+                    gpio-hog;
+                    gpios = <176 0>;
+                    output-high;
+            };
+    };
+
+  - |
+    pinctrl@e6060000 {
+            compatible = "renesas,pfc-r8a7795";
+            reg = <0xe6060000 0x50c>;
+
+            avb_pins: avb {
+                    mux {
+                            groups = "avb_link", "avb_mdio", "avb_mii";
+                            function = "avb";
+                    };
+
+                    pins_mdio {
+                            groups = "avb_mdio";
+                            drive-strength = <24>;
+                    };
+
+                    pins_mii_tx {
+                            pins = "PIN_AVB_TX_CTL", "PIN_AVB_TXC",
+                                   "PIN_AVB_TD0", "PIN_AVB_TD1", "PIN_AVB_TD2",
+                                   "PIN_AVB_TD3";
+                            drive-strength = <12>;
+                    };
+            };
+
+            keys_pins: keys {
+                    pins = "GP_5_17", "GP_5_20", "GP_5_22", "GP_2_1";
+                    bias-pull-up;
+            };
+
+            sdhi0_pins: sd0 {
+                    groups = "sdhi0_data4", "sdhi0_ctrl";
+                    function = "sdhi0";
+                    power-source = <3300>;
+            };
+    };