Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid

Pull HID subsystem updates from Jiri Kosina:

 - The need for HID_QUIRK_NO_INIT_REPORTS per-device quirk has been
   growing dramatically during past years, so the time has come to
   switch over the default, and perform the pro-active reading only in
   cases where it's really needed (multitouch, wacom).

   The only place where this behavior is (in some form) preserved is
   hiddev so that we don't introduce userspace-visible change of
   behavior.

   From Benjamin Tissoires

 - HID++ support for power_supply / baterry reporting.

   From Benjamin Tissoires and Bastien Nocera

 - Vast improvements / rework of DS3 and DS4 in Sony driver.

   From Roderick Colenbrander

 - Improvment (in terms of getting closer to the Microsoft's
   interpretation of slightly ambiguous specification) of logical range
   interpretation in case null-state is set in the rdesc.

   From Valtteri Heikkilä and Tomasz Kramkowski

 - A lot of newly supported device IDs and small assorted fixes

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (71 commits)
  HID: usbhid: Add HID_QUIRK_NOGET for Aten CS-1758 KVM switch
  HID: asus: support backlight on USB keyboards
  HID: wacom: Move wacom_remote_irq and wacom_remote_status_irq
  HID: wacom: generic: sync pad events only for actual packets
  HID: sony: remove redundant check for -ve err
  HID: sony: Make sure to unregister sensors on failure
  HID: sony: Make DS4 bt poll interval adjustable
  HID: sony: Set proper bit flags on DS4 output report
  HID: sony: DS4 use brighter LED colors
  HID: sony: Improve navigation controller axis/button mapping
  HID: sony: Use DS3 MAC address as unique identifier on USB
  HID: logitech-hidpp: add a sysfs file to tell we support power_supply
  HID: logitech-hidpp: enable HID++ 1.0 battery reporting
  HID: logitech-hidpp: add support for battery status for the K750
  HID: logitech-hidpp: battery: provide CAPACITY_LEVEL
  HID: logitech-hidpp: rename battery level into capacity
  HID: logitech-hidpp: battery: provide ONLINE property
  HID: logitech-hidpp: notify battery on connect
  HID: logitech-hidpp: return an error if the queried feature is not present
  HID: logitech-hidpp: create the battery for all types of HID++ devices
  ...

30 files changed, 2490 insertions, 1129 deletions

diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 8d676d2a48ac..e4c9e0e46b95 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -4127,6 +4127,9 @@
 	usbhid.mousepoll=
 			[USBHID] The interval which mice are to be polled at.
 
+	usbhid.jspoll=
+			[USBHID] The interval which joysticks are to be polled at.
+
 	usb-storage.delay_use=
 			[UMS] The delay in seconds before a new device is
 			scanned for Logical Units (default 1).
diff --git a/Documentation/devicetree/bindings/input/hid-over-i2c.txt b/Documentation/devicetree/bindings/input/hid-over-i2c.txt
index 488edcb264c4..28e8bd8b7d64 100644
--- a/Documentation/devicetree/bindings/input/hid-over-i2c.txt
+++ b/Documentation/devicetree/bindings/input/hid-over-i2c.txt
@@ -17,6 +17,22 @@ Required properties:
 - interrupt-parent: the phandle for the interrupt controller
 - interrupts: interrupt line
 
+Additional optional properties:
+
+Some devices may support additional optional properties to help with, e.g.,
+power sequencing. The following properties can be supported by one or more
+device-specific compatible properties, which should be used in addition to the
+"hid-over-i2c" string.
+
+- compatible:
+  * "wacom,w9013" (Wacom W9013 digitizer). Supports:
+    - vdd-supply
+    - post-power-on-delay-ms
+
+- vdd-supply: phandle of the regulator that provides the supply voltage.
+- post-power-on-delay-ms: time required by the device after enabling its regulators
+  before it is ready for communication. Must be used with 'vdd-supply'.
+
 Example:
 
 	i2c-hid-dev@2c {
diff --git a/Documentation/input/event-codes.txt b/Documentation/input/event-codes.txt
index 36ea940e5bb9..575415f4cef0 100644
--- a/Documentation/input/event-codes.txt
+++ b/Documentation/input/event-codes.txt
@@ -301,7 +301,10 @@ them as any other INPUT_PROP_BUTTONPAD device.
 INPUT_PROP_ACCELEROMETER
 -------------------------
 Directional axes on this device (absolute and/or relative x, y, z) represent
-accelerometer data. All other axes retain their meaning. A device must not mix
+accelerometer data. Some devices also report gyroscope data, which devices
+can report through the rotational axes (absolute and/or relative rx, ry, rz).
+
+All other axes retain their meaning. A device must not mix
 regular directional axes and accelerometer axes on the same event node.
 
 Guidelines:
diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig
index 8c54cb8f5d6d..fe40e5e499dd 100644
--- a/drivers/hid/Kconfig
+++ b/drivers/hid/Kconfig
@@ -98,6 +98,18 @@ config HID_A4TECH
 	---help---
 	Support for A4 tech X5 and WOP-35 / Trust 450L mice.
 
+config HID_ACCUTOUCH
+	tristate "Accutouch touch device"
+	depends on USB_HID
+	---help---
+	  This selects a driver for the Accutouch 2216 touch controller.
+
+	  The driver works around a problem in the reported device capabilities
+	  which causes userspace to detect the device as a mouse rather than
+          a touchscreen.
+
+	  Say Y here if you have a Accutouch 2216 touch controller.
+
 config HID_ACRUX
 	tristate "ACRUX game controller support"
 	depends on HID
@@ -136,13 +148,16 @@ config HID_APPLEIR
 
 config HID_ASUS
 	tristate "Asus"
-	depends on I2C_HID
+	depends on LEDS_CLASS
 	---help---
-	Support for Asus notebook built-in keyboard and touchpad via i2c.
+	Support for Asus notebook built-in keyboard and touchpad via i2c, and
+	the Asus Republic of Gamers laptop keyboard special keys.
 
 	Supported devices:
 	- EeeBook X205TA
 	- VivoBook E200HA
+	- GL553V series
+	- GL753V series
 
 config HID_AUREAL
 	tristate "Aureal"
@@ -215,7 +230,8 @@ config HID_CMEDIA
 
 config HID_CP2112
 	tristate "Silicon Labs CP2112 HID USB-to-SMBus Bridge support"
-	depends on USB_HID && I2C && GPIOLIB && GPIOLIB_IRQCHIP
+	depends on USB_HID && I2C && GPIOLIB
+	select GPIOLIB_IRQCHIP
 	---help---
 	Support for Silicon Labs CP2112 HID USB to SMBus Master Bridge.
 	This is a HID device driver which registers as an i2c adapter
@@ -441,6 +457,7 @@ config HID_LOGITECH_DJ
 config HID_LOGITECH_HIDPP
 	tristate "Logitech HID++ devices support"
 	depends on HID_LOGITECH
+	select POWER_SUPPLY
 	---help---
 	Support for Logitech devices relyingon the HID++ Logitech specification
 
@@ -581,6 +598,12 @@ config HID_MULTITOUCH
 	  To compile this driver as a module, choose M here: the
 	  module will be called hid-multitouch.
 
+config HID_NTI
+	tristate "NTI keyboard adapters"
+	---help---
+	Support for the "extra" Sun keyboard keys on keyboards attached
+	through Network Technologies USB-SUN keyboard adapters.
+
 config HID_NTRIG
 	tristate "N-Trig touch screen"
 	depends on USB_HID
diff --git a/drivers/hid/Makefile b/drivers/hid/Makefile
index 4d111f23e801..fef027bc7fa3 100644
--- a/drivers/hid/Makefile
+++ b/drivers/hid/Makefile
@@ -21,6 +21,7 @@ hid-wiimote-y		:= hid-wiimote-core.o hid-wiimote-modules.o
 hid-wiimote-$(CONFIG_DEBUG_FS)	+= hid-wiimote-debug.o
 
 obj-$(CONFIG_HID_A4TECH)	+= hid-a4tech.o
+obj-$(CONFIG_HID_ACCUTOUCH)	+= hid-accutouch.o
 obj-$(CONFIG_HID_ALPS)		+= hid-alps.o
 obj-$(CONFIG_HID_ACRUX)		+= hid-axff.o
 obj-$(CONFIG_HID_APPLE)		+= hid-apple.o
@@ -62,6 +63,7 @@ obj-$(CONFIG_HID_MAYFLASH)	+= hid-mf.o
 obj-$(CONFIG_HID_MICROSOFT)	+= hid-microsoft.o
 obj-$(CONFIG_HID_MONTEREY)	+= hid-monterey.o
 obj-$(CONFIG_HID_MULTITOUCH)	+= hid-multitouch.o
+obj-$(CONFIG_HID_NTI)			+= hid-nti.o
 obj-$(CONFIG_HID_NTRIG)		+= hid-ntrig.o
 obj-$(CONFIG_HID_ORTEK)		+= hid-ortek.o
 obj-$(CONFIG_HID_PRODIKEYS)	+= hid-prodikeys.o
diff --git a/drivers/hid/hid-accutouch.c b/drivers/hid/hid-accutouch.c
new file mode 100644
index 000000000000..4e287160c50a
--- /dev/null
+++ b/drivers/hid/hid-accutouch.c
@@ -0,0 +1,52 @@
+/*
+ * HID driver for Elo Accutouch touchscreens
+ *
+ * Copyright (c) 2016, Collabora Ltd.
+ * Copyright (c) 2016, General Electric Company
+ *
+ * based on hid-penmount.c
+ *  Copyright (c) 2014 Christian Gmeiner <christian.gmeiner <at> gmail.com>
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#include <linux/hid.h>
+#include <linux/module.h>
+#include "hid-ids.h"
+
+static int accutouch_input_mapping(struct hid_device *hdev,
+				   struct hid_input *hi,
+				   struct hid_field *field,
+				   struct hid_usage *usage,
+				   unsigned long **bit, int *max)
+{
+	if ((usage->hid & HID_USAGE_PAGE) == HID_UP_BUTTON) {
+		hid_map_usage(hi, usage, bit, max, EV_KEY, BTN_TOUCH);
+		return 1;
+	}
+
+	return 0;
+}
+
+static const struct hid_device_id accutouch_devices[] = {
+	{ HID_USB_DEVICE(USB_VENDOR_ID_ELO, USB_DEVICE_ID_ELO_ACCUTOUCH_2216) },
+	{ }
+};
+MODULE_DEVICE_TABLE(hid, accutouch_devices);
+
+static struct hid_driver accutouch_driver = {
+	.name = "hid-accutouch",
+	.id_table = accutouch_devices,
+	.input_mapping = accutouch_input_mapping,
+};
+
+module_hid_driver(accutouch_driver);
+
+MODULE_AUTHOR("Martyn Welch <martyn.welch@collabora.co.uk");
+MODULE_DESCRIPTION("Elo Accutouch HID TouchScreen driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/hid/hid-asus.c b/drivers/hid/hid-asus.c
index 70b12f89a193..16df6cc90235 100644
--- a/drivers/hid/hid-asus.c
+++ b/drivers/hid/hid-asus.c
@@ -40,8 +40,12 @@ MODULE_DESCRIPTION("Asus HID Keyboard and TouchPad");
 
 #define FEATURE_REPORT_ID 0x0d
 #define INPUT_REPORT_ID 0x5d
+#define FEATURE_KBD_REPORT_ID 0x5a
 
 #define INPUT_REPORT_SIZE 28
+#define FEATURE_KBD_REPORT_SIZE 16
+
+#define SUPPORT_KBD_BACKLIGHT BIT(0)
 
 #define MAX_CONTACTS 5
 
@@ -63,18 +67,31 @@ MODULE_DESCRIPTION("Asus HID Keyboard and TouchPad");
 #define QUIRK_NO_INIT_REPORTS		BIT(1)
 #define QUIRK_SKIP_INPUT_MAPPING	BIT(2)
 #define QUIRK_IS_MULTITOUCH		BIT(3)
+#define QUIRK_NO_CONSUMER_USAGES	BIT(4)
+#define QUIRK_USE_KBD_BACKLIGHT		BIT(5)
 
-#define KEYBOARD_QUIRKS			(QUIRK_FIX_NOTEBOOK_REPORT | \
-						 QUIRK_NO_INIT_REPORTS)
-#define TOUCHPAD_QUIRKS			(QUIRK_NO_INIT_REPORTS | \
+#define I2C_KEYBOARD_QUIRKS			(QUIRK_FIX_NOTEBOOK_REPORT | \
+						 QUIRK_NO_INIT_REPORTS | \
+						 QUIRK_NO_CONSUMER_USAGES)
+#define I2C_TOUCHPAD_QUIRKS			(QUIRK_NO_INIT_REPORTS | \
 						 QUIRK_SKIP_INPUT_MAPPING | \
 						 QUIRK_IS_MULTITOUCH)
 
 #define TRKID_SGN       ((TRKID_MAX + 1) >> 1)
 
+struct asus_kbd_leds {
+	struct led_classdev cdev;
+	struct hid_device *hdev;
+	struct work_struct work;
+	unsigned int brightness;
+	bool removed;
+};
+
 struct asus_drvdata {
 	unsigned long quirks;
 	struct input_dev *input;
+	struct asus_kbd_leds *kbd_backlight;
+	bool enable_backlight;
 };
 
 static void asus_report_contact_down(struct input_dev *input,
@@ -169,6 +186,148 @@ static int asus_raw_event(struct hid_device *hdev,
 	return 0;
 }
 
+static int asus_kbd_set_report(struct hid_device *hdev, u8 *buf, size_t buf_size)
+{
+	unsigned char *dmabuf;
+	int ret;
+
+	dmabuf = kmemdup(buf, buf_size, GFP_KERNEL);
+	if (!dmabuf)
+		return -ENOMEM;
+
+	ret = hid_hw_raw_request(hdev, FEATURE_KBD_REPORT_ID, dmabuf,
+				 buf_size, HID_FEATURE_REPORT,
+				 HID_REQ_SET_REPORT);
+	kfree(dmabuf);
+
+	return ret;
+}
+
+static int asus_kbd_init(struct hid_device *hdev)
+{
+	u8 buf[] = { FEATURE_KBD_REPORT_ID, 0x41, 0x53, 0x55, 0x53, 0x20, 0x54,
+		     0x65, 0x63, 0x68, 0x2e, 0x49, 0x6e, 0x63, 0x2e, 0x00 };
+	int ret;
+
+	ret = asus_kbd_set_report(hdev, buf, sizeof(buf));
+	if (ret < 0)
+		hid_err(hdev, "Asus failed to send init command: %d\n", ret);
+
+	return ret;
+}
+
+static int asus_kbd_get_functions(struct hid_device *hdev,
+				  unsigned char *kbd_func)
+{
+	u8 buf[] = { FEATURE_KBD_REPORT_ID, 0x05, 0x20, 0x31, 0x00, 0x08 };
+	u8 *readbuf;
+	int ret;
+
+	ret = asus_kbd_set_report(hdev, buf, sizeof(buf));
+	if (ret < 0) {
+		hid_err(hdev, "Asus failed to send configuration command: %d\n", ret);
+		return ret;
+	}
+
+	readbuf = kzalloc(FEATURE_KBD_REPORT_SIZE, GFP_KERNEL);
+	if (!readbuf)
+		return -ENOMEM;
+
+	ret = hid_hw_raw_request(hdev, FEATURE_KBD_REPORT_ID, readbuf,
+				 FEATURE_KBD_REPORT_SIZE, HID_FEATURE_REPORT,
+				 HID_REQ_GET_REPORT);
+	if (ret < 0) {
+		hid_err(hdev, "Asus failed to request functions: %d\n", ret);
+		kfree(readbuf);
+		return ret;
+	}
+
+	*kbd_func = readbuf[6];
+
+	kfree(readbuf);
+	return ret;
+}
+
+static void asus_kbd_backlight_set(struct led_classdev *led_cdev,
+				   enum led_brightness brightness)
+{
+	struct asus_kbd_leds *led = container_of(led_cdev, struct asus_kbd_leds,
+						 cdev);
+	if (led->brightness == brightness)
+		return;
+
+	led->brightness = brightness;
+	schedule_work(&led->work);
+}
+
+static enum led_brightness asus_kbd_backlight_get(struct led_classdev *led_cdev)
+{
+	struct asus_kbd_leds *led = container_of(led_cdev, struct asus_kbd_leds,
+						 cdev);
+
+	return led->brightness;
+}
+
+static void asus_kbd_backlight_work(struct work_struct *work)
+{
+	struct asus_kbd_leds *led = container_of(work, struct asus_kbd_leds, work);
+	u8 buf[] = { FEATURE_KBD_REPORT_ID, 0xba, 0xc5, 0xc4, 0x00 };
+	int ret;
+
+	if (led->removed)
+		return;
+
+	buf[4] = led->brightness;
+
+	ret = asus_kbd_set_report(led->hdev, buf, sizeof(buf));
+	if (ret < 0)
+		hid_err(led->hdev, "Asus failed to set keyboard backlight: %d\n", ret);
+}
+
+static int asus_kbd_register_leds(struct hid_device *hdev)
+{
+	struct asus_drvdata *drvdata = hid_get_drvdata(hdev);
+	unsigned char kbd_func;
+	int ret;
+
+	/* Initialize keyboard */
+	ret = asus_kbd_init(hdev);
+	if (ret < 0)
+		return ret;
+
+	/* Get keyboard functions */
+	ret = asus_kbd_get_functions(hdev, &kbd_func);
+	if (ret < 0)
+		return ret;
+
+	/* Check for backlight support */
+	if (!(kbd_func & SUPPORT_KBD_BACKLIGHT))
+		return -ENODEV;
+
+	drvdata->kbd_backlight = devm_kzalloc(&hdev->dev,
+					      sizeof(struct asus_kbd_leds),
+					      GFP_KERNEL);
+	if (!drvdata->kbd_backlight)
+		return -ENOMEM;
+
+	drvdata->kbd_backlight->removed = false;
+	drvdata->kbd_backlight->brightness = 0;
+	drvdata->kbd_backlight->hdev = hdev;
+	drvdata->kbd_backlight->cdev.name = "asus::kbd_backlight";
+	drvdata->kbd_backlight->cdev.max_brightness = 3;
+	drvdata->kbd_backlight->cdev.brightness_set = asus_kbd_backlight_set;
+	drvdata->kbd_backlight->cdev.brightness_get = asus_kbd_backlight_get;
+	INIT_WORK(&drvdata->kbd_backlight->work, asus_kbd_backlight_work);
+
+	ret = devm_led_classdev_register(&hdev->dev, &drvdata->kbd_backlight->cdev);
+	if (ret < 0) {
+		/* No need to have this still around */
+		devm_kfree(&hdev->dev, drvdata->kbd_backlight);
+	}
+
+	return ret;
+}
+
 static int asus_input_configured(struct hid_device *hdev, struct hid_input *hi)
 {
 	struct input_dev *input = hi->input;
@@ -196,9 +355,14 @@ static int asus_input_configured(struct hid_device *hdev, struct hid_input *hi)
 
 	drvdata->input = input;
 
+	if (drvdata->enable_backlight && asus_kbd_register_leds(hdev))
+		hid_warn(hdev, "Failed to initialize backlight.\n");
+
 	return 0;
 }
 
+#define asus_map_key_clear(c)	hid_map_usage_clear(hi, usage, bit, \
+						    max, EV_KEY, (c))
 static int asus_input_mapping(struct hid_device *hdev,
 		struct hid_input *hi, struct hid_field *field,
 		struct hid_usage *usage, unsigned long **bit,
@@ -213,6 +377,65 @@ static int asus_input_mapping(struct hid_device *hdev,
 		return -1;
 	}
 
+	/* ASUS-specific keyboard hotkeys */
+	if ((usage->hid & HID_USAGE_PAGE) == 0xff310000) {
+		set_bit(EV_REP, hi->input->evbit);
+		switch (usage->hid & HID_USAGE) {
+		case 0x10: asus_map_key_clear(KEY_BRIGHTNESSDOWN);	break;
+		case 0x20: asus_map_key_clear(KEY_BRIGHTNESSUP);		break;
+		case 0x35: asus_map_key_clear(KEY_DISPLAY_OFF);		break;
+		case 0x6c: asus_map_key_clear(KEY_SLEEP);		break;
+		case 0x82: asus_map_key_clear(KEY_CAMERA);		break;
+		case 0x88: asus_map_key_clear(KEY_RFKILL);			break;
+		case 0xb5: asus_map_key_clear(KEY_CALC);			break;
+		case 0xc4: asus_map_key_clear(KEY_KBDILLUMUP);		break;
+		case 0xc5: asus_map_key_clear(KEY_KBDILLUMDOWN);		break;
+
+		/* ASUS touchpad toggle */
+		case 0x6b: asus_map_key_clear(KEY_F21);			break;
+
+		/* ROG key */
+		case 0x38: asus_map_key_clear(KEY_PROG1);		break;
+
+		/* Fn+C ASUS Splendid */
+		case 0xba: asus_map_key_clear(KEY_PROG2);		break;
+
+		/* Fn+Space Power4Gear Hybrid */
+		case 0x5c: asus_map_key_clear(KEY_PROG3);		break;
+
+		default:
+			/* ASUS lazily declares 256 usages, ignore the rest,
+			 * as some make the keyboard appear as a pointer device. */
+			return -1;
+		}
+
+		/*
+		 * Check and enable backlight only on devices with UsagePage ==
+		 * 0xff31 to avoid initializing the keyboard firmware multiple
+		 * times on devices with multiple HID descriptors but same
+		 * PID/VID.
+		 */
+		if (drvdata->quirks & QUIRK_USE_KBD_BACKLIGHT)
+			drvdata->enable_backlight = true;
+
+		return 1;
+	}
+
+	if (drvdata->quirks & QUIRK_NO_CONSUMER_USAGES &&
+		(usage->hid & HID_USAGE_PAGE) == HID_UP_CONSUMER) {
+		switch (usage->hid & HID_USAGE) {
+		case 0xe2: /* Mute */
+		case 0xe9: /* Volume up */
+		case 0xea: /* Volume down */
+			return 0;
+		default:
+			/* Ignore dummy Consumer usages which make the
+			 * keyboard incorrectly appear as a pointer device.
+			 */
+			return -1;
+		}
+	}
+
 	return 0;
 }
 
@@ -305,6 +528,16 @@ err_stop_hw:
 	return ret;
 }
 
+static void asus_remove(struct hid_device *hdev)
+{
+	struct asus_drvdata *drvdata = hid_get_drvdata(hdev);
+
+	if (drvdata->kbd_backlight) {
+		drvdata->kbd_backlight->removed = true;
+		cancel_work_sync(&drvdata->kbd_backlight->work);
+	}
+}
+
 static __u8 *asus_report_fixup(struct hid_device *hdev, __u8 *rdesc,
 		unsigned int *rsize)
 {
@@ -320,9 +553,13 @@ static __u8 *asus_report_fixup(struct hid_device *hdev, __u8 *rdesc,
 
 static const struct hid_device_id asus_devices[] = {
 	{ HID_I2C_DEVICE(USB_VENDOR_ID_ASUSTEK,
-		 USB_DEVICE_ID_ASUSTEK_NOTEBOOK_KEYBOARD), KEYBOARD_QUIRKS},
+		USB_DEVICE_ID_ASUSTEK_I2C_KEYBOARD), I2C_KEYBOARD_QUIRKS},
 	{ HID_I2C_DEVICE(USB_VENDOR_ID_ASUSTEK,
-			 USB_DEVICE_ID_ASUSTEK_TOUCHPAD), TOUCHPAD_QUIRKS },
+		USB_DEVICE_ID_ASUSTEK_I2C_TOUCHPAD), I2C_TOUCHPAD_QUIRKS },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_ASUSTEK,
+		USB_DEVICE_ID_ASUSTEK_ROG_KEYBOARD1) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_ASUSTEK,
+		USB_DEVICE_ID_ASUSTEK_ROG_KEYBOARD2), QUIRK_USE_KBD_BACKLIGHT },
 	{ }
 };
 MODULE_DEVICE_TABLE(hid, asus_devices);
@@ -332,6 +569,7 @@ static struct hid_driver asus_driver = {
 	.id_table		= asus_devices,
 	.report_fixup		= asus_report_fixup,
 	.probe                  = asus_probe,
+	.remove			= asus_remove,
 	.input_mapping          = asus_input_mapping,
 	.input_configured       = asus_input_configured,
 #ifdef CONFIG_PM
diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index d162f0dc76e3..37084b645785 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -1694,7 +1694,7 @@ int hid_connect(struct hid_device *hdev, unsigned int connect_mask)
 		len += sprintf(buf + len, "input");
 	if (hdev->claimed & HID_CLAIMED_HIDDEV)
 		len += sprintf(buf + len, "%shiddev%d", len ? "," : "",
-				hdev->minor);
+				((struct hiddev *)hdev->hiddev)->minor);
 	if (hdev->claimed & HID_CLAIMED_HIDRAW)
 		len += sprintf(buf + len, "%shidraw%d", len ? "," : "",
 				((struct hidraw *)hdev->hidraw)->minor);
@@ -1851,8 +1851,10 @@ static const struct hid_device_id hid_have_special_driver[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_MAGIC_KEYBOARD_ANSI) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY) },
-	{ HID_I2C_DEVICE(USB_VENDOR_ID_ASUSTEK, USB_DEVICE_ID_ASUSTEK_NOTEBOOK_KEYBOARD) },
-	{ HID_I2C_DEVICE(USB_VENDOR_ID_ASUSTEK, USB_DEVICE_ID_ASUSTEK_TOUCHPAD) },
+	{ HID_I2C_DEVICE(USB_VENDOR_ID_ASUSTEK, USB_DEVICE_ID_ASUSTEK_I2C_KEYBOARD) },
+	{ HID_I2C_DEVICE(USB_VENDOR_ID_ASUSTEK, USB_DEVICE_ID_ASUSTEK_I2C_TOUCHPAD) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_ASUSTEK, USB_DEVICE_ID_ASUSTEK_ROG_KEYBOARD1) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_ASUSTEK, USB_DEVICE_ID_ASUSTEK_ROG_KEYBOARD2) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_AUREAL, USB_DEVICE_ID_AUREAL_W01RN) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_BELKIN, USB_DEVICE_ID_FLIP_KVM) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_BETOP_2185BFM, 0x2208) },
@@ -1891,6 +1893,7 @@ static const struct hid_device_id hid_have_special_driver[] = {
 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_ELECOM, USB_DEVICE_ID_ELECOM_BM084) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ELO, 0x0009) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ELO, 0x0030) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_ELO, USB_DEVICE_ID_ELO_ACCUTOUCH_2216) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_EMS, USB_DEVICE_ID_EMS_TRIO_LINKER_PLUS_II) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_EZKEY, USB_DEVICE_ID_BTC_8193) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_GAMERON, USB_DEVICE_ID_GAMERON_DUAL_PSX_ADAPTOR) },
@@ -1991,6 +1994,7 @@ static const struct hid_device_id hid_have_special_driver[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_POWER_COVER) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_MONTEREY, USB_DEVICE_ID_GENIUS_KB29E) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_MSI, USB_DEVICE_ID_MSI_GT683R_LED_PANEL) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_NTI, USB_DEVICE_ID_USB_SUN) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_1) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_2) },
diff --git a/drivers/hid/hid-cp2112.c b/drivers/hid/hid-cp2112.c
index b22d0f83f8e3..078026f63b6f 100644
--- a/drivers/hid/hid-cp2112.c
+++ b/drivers/hid/hid-cp2112.c
@@ -27,6 +27,7 @@
 #include <linux/gpio.h>
 #include <linux/gpio/driver.h>
 #include <linux/hid.h>
+#include <linux/hidraw.h>
 #include <linux/i2c.h>
 #include <linux/module.h>
 #include <linux/nls.h>
@@ -1297,7 +1298,8 @@ static int cp2112_probe(struct hid_device *hdev, const struct hid_device_id *id)
 	dev->adap.algo_data	= dev;
 	dev->adap.dev.parent	= &hdev->dev;
 	snprintf(dev->adap.name, sizeof(dev->adap.name),
-		 "CP2112 SMBus Bridge on hiddev%d", hdev->minor);
+		 "CP2112 SMBus Bridge on hidraw%d",
+		 ((struct hidraw *)hdev->hidraw)->minor);
 	dev->hwversion = buf[2];
 	init_waitqueue_head(&dev->wait);
 
diff --git a/drivers/hid/hid-debug.c b/drivers/hid/hid-debug.c
index c6c9c51c806f..5271db593478 100644
--- a/drivers/hid/hid-debug.c
+++ b/drivers/hid/hid-debug.c
@@ -140,9 +140,11 @@ static const struct hid_usage_entry hid_usage_table[] = {
     {0, 0x03, "LightPen"},
     {0, 0x04, "TouchScreen"},
     {0, 0x05, "TouchPad"},
+    {0, 0x0e, "DeviceConfiguration"},
     {0, 0x20, "Stylus"},
     {0, 0x21, "Puck"},
     {0, 0x22, "Finger"},
+    {0, 0x23, "DeviceSettings"},
     {0, 0x30, "TipPressure"},
     {0, 0x31, "BarrelPressure"},
     {0, 0x32, "InRange"},
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index b26c030926c1..643390ba749d 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -173,8 +173,10 @@
 #define USB_VENDOR_ID_ASUSTEK		0x0b05
 #define USB_DEVICE_ID_ASUSTEK_LCM	0x1726
 #define USB_DEVICE_ID_ASUSTEK_LCM2	0x175b
-#define USB_DEVICE_ID_ASUSTEK_NOTEBOOK_KEYBOARD	0x8585
-#define USB_DEVICE_ID_ASUSTEK_TOUCHPAD	0x0101
+#define USB_DEVICE_ID_ASUSTEK_I2C_KEYBOARD	0x8585
+#define USB_DEVICE_ID_ASUSTEK_I2C_TOUCHPAD	0x0101
+#define USB_DEVICE_ID_ASUSTEK_ROG_KEYBOARD1 0x1854
+#define USB_DEVICE_ID_ASUSTEK_ROG_KEYBOARD2 0x1837
 
 #define USB_VENDOR_ID_ATEN		0x0557
 #define USB_DEVICE_ID_ATEN_UC100KM	0x2004
@@ -184,6 +186,7 @@
 #define USB_DEVICE_ID_ATEN_4PORTKVMC	0x2208
 #define USB_DEVICE_ID_ATEN_CS682	0x2213
 #define USB_DEVICE_ID_ATEN_CS692	0x8021
+#define USB_DEVICE_ID_ATEN_CS1758	0x2220
 
 #define USB_VENDOR_ID_ATMEL		0x03eb
 #define USB_DEVICE_ID_ATMEL_MULTITOUCH	0x211c
@@ -366,6 +369,7 @@
 #define USB_VENDOR_ID_ELO		0x04E7
 #define USB_DEVICE_ID_ELO_TS2515	0x0022
 #define USB_DEVICE_ID_ELO_TS2700	0x0020
+#define USB_DEVICE_ID_ELO_ACCUTOUCH_2216	0x0050
 
 #define USB_VENDOR_ID_EMS		0x2006
 #define USB_DEVICE_ID_EMS_TRIO_LINKER_PLUS_II 0x0118
@@ -548,6 +552,9 @@
 #define USB_VENDOR_ID_IRTOUCHSYSTEMS	0x6615
 #define USB_DEVICE_ID_IRTOUCH_INFRARED_USB	0x0070
 
+#define USB_VENDOR_ID_INNOMEDIA			0x1292
+#define USB_DEVICE_ID_INNEX_GENESIS_ATARI	0x4745
+
 #define USB_VENDOR_ID_ITE               0x048d
 #define USB_DEVICE_ID_ITE_LENOVO_YOGA   0x8386
 #define USB_DEVICE_ID_ITE_LENOVO_YOGA2  0x8350
@@ -771,6 +778,9 @@
 #define USB_DEVICE_ID_NOVATEK_PCT	0x0600
 #define USB_DEVICE_ID_NOVATEK_MOUSE	0x1602
 
+#define USB_VENDOR_ID_NTI               0x0757
+#define USB_DEVICE_ID_USB_SUN           0x0a00
+
 #define USB_VENDOR_ID_NTRIG		0x1b96
 #define USB_DEVICE_ID_NTRIG_TOUCH_SCREEN   0x0001
 #define USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_1   0x0003
diff --git a/drivers/hid/hid-input.c b/drivers/hid/hid-input.c
index d05f903c7614..a1ebdd7d4d4d 100644
--- a/drivers/hid/hid-input.c
+++ b/drivers/hid/hid-input.c
@@ -1150,18 +1150,26 @@ void hidinput_hid_event(struct hid_device *hid, struct hid_field *field, struct
 
 	/*
 	 * Ignore out-of-range values as per HID specification,
-	 * section 5.10 and 6.2.25.
+	 * section 5.10 and 6.2.25, when NULL state bit is present.
+	 * When it's not, clamp the value to match Microsoft's input
+	 * driver as mentioned in "Required HID usages for digitizers":
+	 * https://msdn.microsoft.com/en-us/library/windows/hardware/dn672278(v=vs.85).asp
 	 *
 	 * The logical_minimum < logical_maximum check is done so that we
 	 * don't unintentionally discard values sent by devices which
 	 * don't specify logical min and max.
 	 */
 	if ((field->flags & HID_MAIN_ITEM_VARIABLE) &&
-	    (field->logical_minimum < field->logical_maximum) &&
-	    (value < field->logical_minimum ||
-	     value > field->logical_maximum)) {
-		dbg_hid("Ignoring out-of-range value %x\n", value);
-		return;
+	    (field->logical_minimum < field->logical_maximum)) {
+		if (field->flags & HID_MAIN_ITEM_NULL_STATE &&
+		    (value < field->logical_minimum ||
+		     value > field->logical_maximum)) {
+			dbg_hid("Ignoring out-of-range value %x\n", value);
+			return;
+		}
+		value = clamp(value,
+			      field->logical_minimum,
+			      field->logical_maximum);
 	}
 
 	/*
diff --git a/drivers/hid/hid-logitech-dj.c b/drivers/hid/hid-logitech-dj.c
index 5bc6d80d5be7..826fa1e1c8d9 100644
--- a/drivers/hid/hid-logitech-dj.c
+++ b/drivers/hid/hid-logitech-dj.c
@@ -692,8 +692,12 @@ static void logi_dj_ll_close(struct hid_device *hid)
 	dbg_hid("%s:%s\n", __func__, hid->phys);
 }
 
-static u8 unifying_name_query[]  = {0x10, 0xff, 0x83, 0xb5, 0x40, 0x00, 0x00};
-static u8 unifying_name_answer[] = {0x11, 0xff, 0x83, 0xb5};
+/*
+ * Register 0xB5 is "pairing information". It is solely intended for the
+ * receiver, so do not overwrite the device index.
+ */
+static u8 unifying_pairing_query[]  = {0x10, 0xff, 0x83, 0xb5};
+static u8 unifying_pairing_answer[] = {0x11, 0xff, 0x83, 0xb5};
 
 static int logi_dj_ll_raw_request(struct hid_device *hid,
 				  unsigned char reportnum, __u8 *buf,
@@ -712,9 +716,9 @@ static int logi_dj_ll_raw_request(struct hid_device *hid,
 
 		/* special case where we should not overwrite
 		 * the device_index */
-		if (count == 7 && !memcmp(buf, unifying_name_query,
-					  sizeof(unifying_name_query)))
-			buf[4] |= djdev->device_index - 1;
+		if (count == 7 && !memcmp(buf, unifying_pairing_query,
+					  sizeof(unifying_pairing_query)))
+			buf[4] = (buf[4] & 0xf0) | (djdev->device_index - 1);
 		else
 			buf[1] = djdev->device_index;
 		return hid_hw_raw_request(djrcv_dev->hdev, reportnum, buf,
@@ -911,9 +915,8 @@ static int logi_dj_hidpp_event(struct hid_device *hdev,
 		/* special case were the device wants to know its unifying
 		 * name */
 		if (size == HIDPP_REPORT_LONG_LENGTH &&
-		    !memcmp(data, unifying_name_answer,
-			    sizeof(unifying_name_answer)) &&
-		    ((data[4] & 0xF0) == 0x40))
+		    !memcmp(data, unifying_pairing_answer,
+			    sizeof(unifying_pairing_answer)))
 			device_index = (data[4] & 0x0F) + 1;
 		else
 			return false;
diff --git a/drivers/hid/hid-logitech-hidpp.c b/drivers/hid/hid-logitech-hidpp.c
index 2e2515a4c070..41b39464ded8 100644
--- a/drivers/hid/hid-logitech-hidpp.c
+++ b/drivers/hid/hid-logitech-hidpp.c
@@ -56,15 +56,21 @@ MODULE_PARM_DESC(disable_tap_to_click,
 #define HIDPP_QUIRK_CLASS_M560			BIT(1)
 #define HIDPP_QUIRK_CLASS_K400			BIT(2)
 #define HIDPP_QUIRK_CLASS_G920			BIT(3)
+#define HIDPP_QUIRK_CLASS_K750			BIT(4)
 
 /* bits 2..20 are reserved for classes */
-#define HIDPP_QUIRK_CONNECT_EVENTS		BIT(21)
+/* #define HIDPP_QUIRK_CONNECT_EVENTS		BIT(21) disabled */
 #define HIDPP_QUIRK_WTP_PHYSICAL_BUTTONS	BIT(22)
 #define HIDPP_QUIRK_NO_HIDINPUT			BIT(23)
 #define HIDPP_QUIRK_FORCE_OUTPUT_REPORTS	BIT(24)
+#define HIDPP_QUIRK_UNIFYING			BIT(25)
 
-#define HIDPP_QUIRK_DELAYED_INIT		(HIDPP_QUIRK_NO_HIDINPUT | \
-						 HIDPP_QUIRK_CONNECT_EVENTS)
+#define HIDPP_QUIRK_DELAYED_INIT		HIDPP_QUIRK_NO_HIDINPUT
+
+#define HIDPP_CAPABILITY_HIDPP10_BATTERY	BIT(0)
+#define HIDPP_CAPABILITY_HIDPP20_BATTERY	BIT(1)
+#define HIDPP_CAPABILITY_BATTERY_MILEAGE	BIT(2)
+#define HIDPP_CAPABILITY_BATTERY_LEVEL_STATUS	BIT(3)
 
 /*
  * There are two hidpp protocols in use, the first version hidpp10 is known
@@ -110,6 +116,18 @@ struct hidpp_report {
 	};
 } __packed;
 
+struct hidpp_battery {
+	u8 feature_index;
+	u8 solar_feature_index;
+	struct power_supply_desc desc;
+	struct power_supply *ps;
+	char name[64];
+	int status;
+	int capacity;
+	int level;
+	bool online;
+};
+
 struct hidpp_device {
 	struct hid_device *hid_dev;
 	struct mutex send_mutex;
@@ -128,8 +146,10 @@ struct hidpp_device {
 	struct input_dev *delayed_input;
 
 	unsigned long quirks;
-};
+	unsigned long capabilities;
 
+	struct hidpp_battery battery;
+};
 
 /* HID++ 1.0 error codes */
 #define HIDPP_ERROR				0x8f
@@ -380,15 +400,220 @@ static void hidpp_prefix_name(char **name, int name_length)
 #define HIDPP_SET_LONG_REGISTER				0x82
 #define HIDPP_GET_LONG_REGISTER				0x83
 
+#define HIDPP_REG_GENERAL				0x00
+
+static int hidpp10_enable_battery_reporting(struct hidpp_device *hidpp_dev)
+{
+	struct hidpp_report response;
+	int ret;
+	u8 params[3] = { 0 };
+
+	ret = hidpp_send_rap_command_sync(hidpp_dev,
+					REPORT_ID_HIDPP_SHORT,
+					HIDPP_GET_REGISTER,
+					HIDPP_REG_GENERAL,
+					NULL, 0, &response);
+	if (ret)
+		return ret;
+
+	memcpy(params, response.rap.params, 3);
+
+	/* Set the battery bit */
+	params[0] |= BIT(4);
+
+	return hidpp_send_rap_command_sync(hidpp_dev,
+					REPORT_ID_HIDPP_SHORT,
+					HIDPP_SET_REGISTER,
+					HIDPP_REG_GENERAL,
+					params, 3, &response);
+}
+
+#define HIDPP_REG_BATTERY_STATUS			0x07
+
+static int hidpp10_battery_status_map_level(u8 param)
+{
+	int level;
+
+	switch (param) {
+	case 1 ... 2:
+		level = POWER_SUPPLY_CAPACITY_LEVEL_CRITICAL;
+		break;
+	case 3 ... 4:
+		level = POWER_SUPPLY_CAPACITY_LEVEL_LOW;
+		break;
+	case 5 ... 6:
+		level = POWER_SUPPLY_CAPACITY_LEVEL_NORMAL;
+		break;
+	case 7:
+		level = POWER_SUPPLY_CAPACITY_LEVEL_HIGH;
+		break;
+	default:
+		level = POWER_SUPPLY_CAPACITY_LEVEL_UNKNOWN;
+	}
+
+	return level;
+}
+
+static int hidpp10_battery_status_map_status(u8 param)
+{
+	int status;
+
+	switch (param) {
+	case 0x00:
+		/* discharging (in use) */
+		status = POWER_SUPPLY_STATUS_DISCHARGING;
+		break;
+	case 0x21: /* (standard) charging */
+	case 0x24: /* fast charging */
+	case 0x25: /* slow charging */
+		status = POWER_SUPPLY_STATUS_CHARGING;
+		break;
+	case 0x26: /* topping charge */
+	case 0x22: /* charge complete */
+		status = POWER_SUPPLY_STATUS_FULL;
+		break;
+	case 0x20: /* unknown */
+		status = POWER_SUPPLY_STATUS_UNKNOWN;
+		break;
+	/*
+	 * 0x01...0x1F = reserved (not charging)
+	 * 0x23 = charging error
+	 * 0x27..0xff = reserved
+	 */
+	default:
+		status = POWER_SUPPLY_STATUS_NOT_CHARGING;
+		break;
+	}
+
+	return status;
+}
+
+static int hidpp10_query_battery_status(struct hidpp_device *hidpp)
+{
+	struct hidpp_report response;
+	int ret, status;
+
+	ret = hidpp_send_rap_command_sync(hidpp,
+					REPORT_ID_HIDPP_SHORT,
+					HIDPP_GET_REGISTER,
+					HIDPP_REG_BATTERY_STATUS,
+					NULL, 0, &response);
+	if (ret)
+		return ret;
+
+	hidpp->battery.level =
+		hidpp10_battery_status_map_level(response.rap.params[0]);
+	status = hidpp10_battery_status_map_status(response.rap.params[1]);
+	hidpp->battery.status = status;
+	/* the capacity is only available when discharging or full */
+	hidpp->battery.online = status == POWER_SUPPLY_STATUS_DISCHARGING ||
+				status == POWER_SUPPLY_STATUS_FULL;
+
+	return 0;
+}
+
+#define HIDPP_REG_BATTERY_MILEAGE			0x0D
+
+static int hidpp10_battery_mileage_map_status(u8 param)
+{
+	int status;
+
+	switch (param >> 6) {
+	case 0x00:
+		/* discharging (in use) */
+		status = POWER_SUPPLY_STATUS_DISCHARGING;
+		break;
+	case 0x01: /* charging */
+		status = POWER_SUPPLY_STATUS_CHARGING;
+		break;
+	case 0x02: /* charge complete */
+		status = POWER_SUPPLY_STATUS_FULL;
+		break;
+	/*
+	 * 0x03 = charging error
+	 */
+	default:
+		status = POWER_SUPPLY_STATUS_NOT_CHARGING;
+		break;
+	}
+
+	return status;
+}
+
+static int hidpp10_query_battery_mileage(struct hidpp_device *hidpp)
+{
+	struct hidpp_report response;
+	int ret, status;
+
+	ret = hidpp_send_rap_command_sync(hidpp,
+					REPORT_ID_HIDPP_SHORT,
+					HIDPP_GET_REGISTER,
+					HIDPP_REG_BATTERY_MILEAGE,
+					NULL, 0, &response);
+	if (ret)
+		return ret;
+
+	hidpp->battery.capacity = response.rap.params[0];
+	status = hidpp10_battery_mileage_map_status(response.rap.params[2]);
+	hidpp->battery.status = status;
+	/* the capacity is only available when discharging or full */
+	hidpp->battery.online = status == POWER_SUPPLY_STATUS_DISCHARGING ||
+				status == POWER_SUPPLY_STATUS_FULL;
+
+	return 0;
+}
+
+static int hidpp10_battery_event(struct hidpp_device *hidpp, u8 *data, int size)
+{
+	struct hidpp_report *report = (struct hidpp_report *)data;
+	int status, capacity, level;
+	bool changed;
+
+	if (report->report_id != REPORT_ID_HIDPP_SHORT)
+		return 0;
+
+	switch (report->rap.sub_id) {
+	case HIDPP_REG_BATTERY_STATUS:
+		capacity = hidpp->battery.capacity;
+		level = hidpp10_battery_status_map_level(report->rawbytes[1]);
+		status = hidpp10_battery_status_map_status(report->rawbytes[2]);
+		break;
+	case HIDPP_REG_BATTERY_MILEAGE:
+		capacity = report->rap.params[0];
+		level = hidpp->battery.level;
+		status = hidpp10_battery_mileage_map_status(report->rawbytes[3]);
+		break;
+	default:
+		return 0;
+	}
+
+	changed = capacity != hidpp->battery.capacity ||
+		  level != hidpp->battery.level ||
+		  status != hidpp->battery.status;
+
+	/* the capacity is only available when discharging or full */
+	hidpp->battery.online = status == POWER_SUPPLY_STATUS_DISCHARGING ||
+				status == POWER_SUPPLY_STATUS_FULL;
+
+	if (changed) {
+		hidpp->battery.level = level;
+		hidpp->battery.status = status;
+		if (hidpp->battery.ps)
+			power_supply_changed(hidpp->battery.ps);
+	}
+
+	return 0;
+}
+
 #define HIDPP_REG_PAIRING_INFORMATION			0xB5
-#define DEVICE_NAME					0x40
+#define HIDPP_EXTENDED_PAIRING				0x30
+#define HIDPP_DEVICE_NAME				0x40
 
-static char *hidpp_get_unifying_name(struct hidpp_device *hidpp_dev)
+static char *hidpp_unifying_get_name(struct hidpp_device *hidpp_dev)
 {
 	struct hidpp_report response;
 	int ret;
-	/* hid-logitech-dj is in charge of setting the right device index */
-	u8 params[1] = { DEVICE_NAME };
+	u8 params[1] = { HIDPP_DEVICE_NAME };
 	char *name;
 	int len;
 
@@ -417,6 +642,54 @@ static char *hidpp_get_unifying_name(struct hidpp_device *hidpp_dev)
 	return name;
 }
 
+static int hidpp_unifying_get_serial(struct hidpp_device *hidpp, u32 *serial)
+{
+	struct hidpp_report response;
+	int ret;
+	u8 params[1] = { HIDPP_EXTENDED_PAIRING };
+
+	ret = hidpp_send_rap_command_sync(hidpp,
+					REPORT_ID_HIDPP_SHORT,
+					HIDPP_GET_LONG_REGISTER,
+					HIDPP_REG_PAIRING_INFORMATION,
+					params, 1, &response);
+	if (ret)
+		return ret;
+
+	/*
+	 * We don't care about LE or BE, we will output it as a string
+	 * with %4phD, so we need to keep the order.
+	 */
+	*serial = *((u32 *)&response.rap.params[1]);
+	return 0;
+}
+
+static int hidpp_unifying_init(struct hidpp_device *hidpp)
+{
+	struct hid_device *hdev = hidpp->hid_dev;
+	const char *name;
+	u32 serial;
+	int ret;
+
+	ret = hidpp_unifying_get_serial(hidpp, &serial);
+	if (ret)
+		return ret;
+
+	snprintf(hdev->uniq, sizeof(hdev->uniq), "%04x-%4phD",
+		 hdev->product, &serial);
+	dbg_hid("HID++ Unifying: Got serial: %s\n", hdev->uniq);
+
+	name = hidpp_unifying_get_name(hidpp);
+	if (!name)
+		return -EIO;
+
+	snprintf(hdev->name, sizeof(hdev->name), "%s", name);
+	dbg_hid("HID++ Unifying: Got name: %s\n", name);
+
+	kfree(name);
+	return 0;
+}
+
 /* -------------------------------------------------------------------------- */
 /* 0x0000: Root                                                               */
 /* -------------------------------------------------------------------------- */
@@ -441,6 +714,9 @@ static int hidpp_root_get_feature(struct hidpp_device *hidpp, u16 feature,
 	if (ret)
 		return ret;
 
+	if (response.fap.params[0] == 0)
+		return -ENOENT;
+
 	*feature_index = response.fap.params[0];
 	*feature_type = response.fap.params[1];
 
@@ -607,6 +883,355 @@ static char *hidpp_get_device_name(struct hidpp_device *hidpp)
 }
 
 /* -------------------------------------------------------------------------- */
+/* 0x1000: Battery level status                                               */
+/* -------------------------------------------------------------------------- */
+
+#define HIDPP_PAGE_BATTERY_LEVEL_STATUS				0x1000
+
+#define CMD_BATTERY_LEVEL_STATUS_GET_BATTERY_LEVEL_STATUS	0x00
+#define CMD_BATTERY_LEVEL_STATUS_GET_BATTERY_CAPABILITY		0x10
+
+#define EVENT_BATTERY_LEVEL_STATUS_BROADCAST			0x00
+
+#define FLAG_BATTERY_LEVEL_DISABLE_OSD				BIT(0)
+#define FLAG_BATTERY_LEVEL_MILEAGE				BIT(1)
+#define FLAG_BATTERY_LEVEL_RECHARGEABLE				BIT(2)
+
+static int hidpp_map_battery_level(int capacity)
+{
+	if (capacity < 11)
+		return POWER_SUPPLY_CAPACITY_LEVEL_CRITICAL;
+	else if (capacity < 31)
+		return POWER_SUPPLY_CAPACITY_LEVEL_LOW;
+	else if (capacity < 81)
+		return POWER_SUPPLY_CAPACITY_LEVEL_NORMAL;
+	return POWER_SUPPLY_CAPACITY_LEVEL_FULL;
+}
+
+static int hidpp20_batterylevel_map_status_capacity(u8 data[3], int *capacity,
+						    int *next_capacity,
+						    int *level)
+{
+	int status;
+
+	*capacity = data[0];
+	*next_capacity = data[1];
+	*level = POWER_SUPPLY_CAPACITY_LEVEL_UNKNOWN;
+
+	/* When discharging, we can rely on the device reported capacity.
+	 * For all other states the device reports 0 (unknown).
+	 */
+	switch (data[2]) {
+		case 0: /* discharging (in use) */
+			status = POWER_SUPPLY_STATUS_DISCHARGING;
+			*level = hidpp_map_battery_level(*capacity);
+			break;
+		case 1: /* recharging */
+			status = POWER_SUPPLY_STATUS_CHARGING;
+			break;
+		case 2: /* charge in final stage */
+			status = POWER_SUPPLY_STATUS_CHARGING;
+			break;
+		case 3: /* charge complete */
+			status = POWER_SUPPLY_STATUS_FULL;
+			*level = POWER_SUPPLY_CAPACITY_LEVEL_FULL;
+			*capacity = 100;
+			break;
+		case 4: /* recharging below optimal speed */
+			status = POWER_SUPPLY_STATUS_CHARGING;
+			break;
+		/* 5 = invalid battery type
+		   6 = thermal error
+		   7 = other charging error */
+		default:
+			status = POWER_SUPPLY_STATUS_NOT_CHARGING;
+			break;
+	}
+
+	return status;
+}
+
+static int hidpp20_batterylevel_get_battery_capacity(struct hidpp_device *hidpp,
+						     u8 feature_index,
+						     int *status,
+						     int *capacity,
+						     int *next_capacity,
+						     int *level)
+{
+	struct hidpp_report response;
+	int ret;
+	u8 *params = (u8 *)response.fap.params;
+
+	ret = hidpp_send_fap_command_sync(hidpp, feature_index,
+					  CMD_BATTERY_LEVEL_STATUS_GET_BATTERY_LEVEL_STATUS,
+					  NULL, 0, &response);
+	if (ret > 0) {
+		hid_err(hidpp->hid_dev, "%s: received protocol error 0x%02x\n",
+			__func__, ret);
+		return -EPROTO;
+	}
+	if (ret)
+		return ret;
+
+	*status = hidpp20_batterylevel_map_status_capacity(params, capacity,
+							   next_capacity,
+							   level);
+
+	return 0;
+}
+
+static int hidpp20_batterylevel_get_battery_info(struct hidpp_device *hidpp,
+						  u8 feature_index)
+{
+	struct hidpp_report response;
+	int ret;
+	u8 *params = (u8 *)response.fap.params;
+	unsigned int level_count, flags;
+
+	ret = hidpp_send_fap_command_sync(hidpp, feature_index,
+					  CMD_BATTERY_LEVEL_STATUS_GET_BATTERY_CAPABILITY,
+					  NULL, 0, &response);
+	if (ret > 0) {
+		hid_err(hidpp->hid_dev, "%s: received protocol error 0x%02x\n",
+			__func__, ret);
+		return -EPROTO;
+	}
+	if (ret)
+		return ret;
+
+	level_count = params[0];
+	flags = params[1];
+
+	if (level_count < 10 || !(flags & FLAG_BATTERY_LEVEL_MILEAGE))
+		hidpp->capabilities |= HIDPP_CAPABILITY_BATTERY_LEVEL_STATUS;
+	else
+		hidpp->capabilities |= HIDPP_CAPABILITY_BATTERY_MILEAGE;
+
+	return 0;
+}
+
+static int hidpp20_query_battery_info(struct hidpp_device *hidpp)
+{
+	u8 feature_type;
+	int ret;
+	int status, capacity, next_capacity, level;
+
+	if (hidpp->battery.feature_index == 0xff) {
+		ret = hidpp_root_get_feature(hidpp,
+					     HIDPP_PAGE_BATTERY_LEVEL_STATUS,
+					     &hidpp->battery.feature_index,
+					     &feature_type);
+		if (ret)
+			return ret;
+	}
+
+	ret = hidpp20_batterylevel_get_battery_capacity(hidpp,
+						hidpp->battery.feature_index,
+						&status, &capacity,
+						&next_capacity, &level);
+	if (ret)
+		return ret;
+
+	ret = hidpp20_batterylevel_get_battery_info(hidpp,
+						hidpp->battery.feature_index);
+	if (ret)
+		return ret;
+
+	hidpp->battery.status = status;
+	hidpp->battery.capacity = capacity;
+	hidpp->battery.level = level;
+	/* the capacity is only available when discharging or full */
+	hidpp->battery.online = status == POWER_SUPPLY_STATUS_DISCHARGING ||
+				status == POWER_SUPPLY_STATUS_FULL;
+
+	return 0;
+}
+
+static int hidpp20_battery_event(struct hidpp_device *hidpp,
+				 u8 *data, int size)
+{
+	struct hidpp_report *report = (struct hidpp_report *)data;
+	int status, capacity, next_capacity, level;
+	bool changed;
+
+	if (report->fap.feature_index != hidpp->battery.feature_index ||
+	    report->fap.funcindex_clientid != EVENT_BATTERY_LEVEL_STATUS_BROADCAST)
+		return 0;
+
+	status = hidpp20_batterylevel_map_status_capacity(report->fap.params,
+							  &capacity,
+							  &next_capacity,
+							  &level);
+
+	/* the capacity is only available when discharging or full */
+	hidpp->battery.online = status == POWER_SUPPLY_STATUS_DISCHARGING ||
+				status == POWER_SUPPLY_STATUS_FULL;
+
+	changed = capacity != hidpp->battery.capacity ||
+		  level != hidpp->battery.level ||
+		  status != hidpp->battery.status;
+
+	if (changed) {
+		hidpp->battery.level = level;
+		hidpp->battery.capacity = capacity;
+		hidpp->battery.status = status;
+		if (hidpp->battery.ps)
+			power_supply_changed(hidpp->battery.ps);
+	}
+
+	return 0;
+}
+
+static enum power_supply_property hidpp_battery_props[] = {
+	POWER_SUPPLY_PROP_ONLINE,
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_SCOPE,
+	POWER_SUPPLY_PROP_MODEL_NAME,
+	POWER_SUPPLY_PROP_MANUFACTURER,
+	POWER_SUPPLY_PROP_SERIAL_NUMBER,
+	0, /* placeholder for POWER_SUPPLY_PROP_CAPACITY, */
+	0, /* placeholder for POWER_SUPPLY_PROP_CAPACITY_LEVEL, */
+};
+
+static int hidpp_battery_get_property(struct power_supply *psy,
+				      enum power_supply_property psp,
+				      union power_supply_propval *val)
+{
+	struct hidpp_device *hidpp = power_supply_get_drvdata(psy);
+	int ret = 0;
+
+	switch(psp) {
+		case POWER_SUPPLY_PROP_STATUS:
+			val->intval = hidpp->battery.status;
+			break;
+		case POWER_SUPPLY_PROP_CAPACITY:
+			val->intval = hidpp->battery.capacity;
+			break;
+		case POWER_SUPPLY_PROP_CAPACITY_LEVEL:
+			val->intval = hidpp->battery.level;
+			break;
+		case POWER_SUPPLY_PROP_SCOPE:
+			val->intval = POWER_SUPPLY_SCOPE_DEVICE;
+			break;
+		case POWER_SUPPLY_PROP_ONLINE:
+			val->intval = hidpp->battery.online;
+			break;
+		case POWER_SUPPLY_PROP_MODEL_NAME:
+			if (!strncmp(hidpp->name, "Logitech ", 9))
+				val->strval = hidpp->name + 9;
+			else
+				val->strval = hidpp->name;
+			break;
+		case POWER_SUPPLY_PROP_MANUFACTURER:
+			val->strval = "Logitech";
+			break;
+		case POWER_SUPPLY_PROP_SERIAL_NUMBER:
+			val->strval = hidpp->hid_dev->uniq;
+			break;
+		default:
+			ret = -EINVAL;
+			break;
+	}
+
+	return ret;
+}
+
+/* -------------------------------------------------------------------------- */
+/* 0x4301: Solar Keyboard                                                     */
+/* -------------------------------------------------------------------------- */
+
+#define HIDPP_PAGE_SOLAR_KEYBOARD			0x4301
+
+#define CMD_SOLAR_SET_LIGHT_MEASURE			0x00
+
+#define EVENT_SOLAR_BATTERY_BROADCAST			0x00
+#define EVENT_SOLAR_BATTERY_LIGHT_MEASURE		0x10
+#define EVENT_SOLAR_CHECK_LIGHT_BUTTON			0x20
+
+static int hidpp_solar_request_battery_event(struct hidpp_device *hidpp)
+{
+	struct hidpp_report response;
+	u8 params[2] = { 1, 1 };
+	u8 feature_type;
+	int ret;
+
+	if (hidpp->battery.feature_index == 0xff) {
+		ret = hidpp_root_get_feature(hidpp,
+					     HIDPP_PAGE_SOLAR_KEYBOARD,
+					     &hidpp->battery.solar_feature_index,
+					     &feature_type);
+		if (ret)
+			return ret;
+	}
+
+	ret = hidpp_send_fap_command_sync(hidpp,
+					  hidpp->battery.solar_feature_index,
+					  CMD_SOLAR_SET_LIGHT_MEASURE,
+					  params, 2, &response);
+	if (ret > 0) {
+		hid_err(hidpp->hid_dev, "%s: received protocol error 0x%02x\n",
+			__func__, ret);
+		return -EPROTO;
+	}
+	if (ret)
+		return ret;
+
+	hidpp->capabilities |= HIDPP_CAPABILITY_BATTERY_MILEAGE;
+
+	return 0;
+}
+
+static int hidpp_solar_battery_event(struct hidpp_device *hidpp,
+				     u8 *data, int size)
+{
+	struct hidpp_report *report = (struct hidpp_report *)data;
+	int capacity, lux, status;
+	u8 function;
+
+	function = report->fap.funcindex_clientid;
+
+
+	if (report->fap.feature_index != hidpp->battery.solar_feature_index ||
+	    !(function == EVENT_SOLAR_BATTERY_BROADCAST ||
+	      function == EVENT_SOLAR_BATTERY_LIGHT_MEASURE ||
+	      function == EVENT_SOLAR_CHECK_LIGHT_BUTTON))
+		return 0;
+
+	capacity = report->fap.params[0];
+
+	switch (function) {
+	case EVENT_SOLAR_BATTERY_LIGHT_MEASURE:
+		lux = (report->fap.params[1] << 8) | report->fap.params[2];
+		if (lux > 200)
+			status = POWER_SUPPLY_STATUS_CHARGING;
+		else
+			status = POWER_SUPPLY_STATUS_DISCHARGING;
+		break;
+	case EVENT_SOLAR_CHECK_LIGHT_BUTTON:
+	default:
+		if (capacity < hidpp->battery.capacity)
+			status = POWER_SUPPLY_STATUS_DISCHARGING;
+		else
+			status = POWER_SUPPLY_STATUS_CHARGING;
+
+	}
+
+	if (capacity == 100)
+		status = POWER_SUPPLY_STATUS_FULL;
+
+	hidpp->battery.online = true;
+	if (capacity != hidpp->battery.capacity ||
+	    status != hidpp->battery.status) {
+		hidpp->battery.capacity = capacity;
+		hidpp->battery.status = status;
+		if (hidpp->battery.ps)
+			power_supply_changed(hidpp->battery.ps);
+	}
+
+	return 0;
+}
+
+/* -------------------------------------------------------------------------- */
 /* 0x6010: Touchpad FW items                                                  */
 /* -------------------------------------------------------------------------- */
 
@@ -1599,9 +2224,6 @@ static int wtp_connect(struct hid_device *hdev, bool connected)
 	struct wtp_data *wd = hidpp->private_data;
 	int ret;
 
-	if (!connected)
-		return 0;
-
 	if (!wd->x_size) {
 		ret = wtp_get_config(hidpp);
 		if (ret) {
@@ -1669,9 +2291,6 @@ static int m560_send_config_command(struct hid_device *hdev, bool connected)
 
 	hidpp_dev = hid_get_drvdata(hdev);
 
-	if (!connected)
-		return -ENODEV;
-
 	return hidpp_send_rap_command_sync(
 		hidpp_dev,
 		REPORT_ID_HIDPP_SHORT,
@@ -1875,9 +2494,6 @@ static int k400_connect(struct hid_device *hdev, bool connected)
 {
 	struct hidpp_device *hidpp = hid_get_drvdata(hdev);
 
-	if (!connected)
-		return 0;
-
 	if (!disable_tap_to_click)
 		return 0;
 
@@ -1974,6 +2590,7 @@ static int hidpp_raw_hidpp_event(struct hidpp_device *hidpp, u8 *data,
 	struct hidpp_report *question = hidpp->send_receive_buf;
 	struct hidpp_report *answer = hidpp->send_receive_buf;
 	struct hidpp_report *report = (struct hidpp_report *)data;
+	int ret;
 
 	/*
 	 * If the mutex is locked then we have a pending answer from a
@@ -2002,12 +2619,26 @@ static int hidpp_raw_hidpp_event(struct hidpp_device *hidpp, u8 *data,
 	if (unlikely(hidpp_report_is_connect_event(report))) {
 		atomic_set(&hidpp->connected,
 				!(report->rap.params[0] & (1 << 6)));
-		if ((hidpp->quirks & HIDPP_QUIRK_CONNECT_EVENTS) &&
-		    (schedule_work(&hidpp->work) == 0))
+		if (schedule_work(&hidpp->work) == 0)
 			dbg_hid("%s: connect event already queued\n", __func__);
 		return 1;
 	}
 
+	if (hidpp->capabilities & HIDPP_CAPABILITY_HIDPP20_BATTERY) {
+		ret = hidpp20_battery_event(hidpp, data, size);
+		if (ret != 0)
+			return ret;
+		ret = hidpp_solar_battery_event(hidpp, data, size);
+		if (ret != 0)
+			return ret;
+	}
+
+	if (hidpp->capabilities & HIDPP_CAPABILITY_HIDPP10_BATTERY) {
+		ret = hidpp10_battery_event(hidpp, data, size);
+		if (ret != 0)
+			return ret;
+	}
+
 	return 0;
 }
 
@@ -2058,20 +2689,90 @@ static int hidpp_raw_event(struct hid_device *hdev, struct hid_report *report,
 	return 0;
 }
 
-static void hidpp_overwrite_name(struct hid_device *hdev, bool use_unifying)
+static int hidpp_initialize_battery(struct hidpp_device *hidpp)
+{
+	static atomic_t battery_no = ATOMIC_INIT(0);
+	struct power_supply_config cfg = { .drv_data = hidpp };
+	struct power_supply_desc *desc = &hidpp->battery.desc;
+	enum power_supply_property *battery_props;
+	struct hidpp_battery *battery;
+	unsigned int num_battery_props;
+	unsigned long n;
+	int ret;
+
+	if (hidpp->battery.ps)
+		return 0;
+
+	hidpp->battery.feature_index = 0xff;
+	hidpp->battery.solar_feature_index = 0xff;
+
+	if (hidpp->protocol_major >= 2) {
+		if (hidpp->quirks & HIDPP_QUIRK_CLASS_K750)
+			ret = hidpp_solar_request_battery_event(hidpp);
+		else
+			ret = hidpp20_query_battery_info(hidpp);
+
+		if (ret)
+			return ret;
+		hidpp->capabilities |= HIDPP_CAPABILITY_HIDPP20_BATTERY;
+	} else {
+		ret = hidpp10_query_battery_status(hidpp);
+		if (ret) {
+			ret = hidpp10_query_battery_mileage(hidpp);
+			if (ret)
+				return -ENOENT;
+			hidpp->capabilities |= HIDPP_CAPABILITY_BATTERY_MILEAGE;
+		} else {
+			hidpp->capabilities |= HIDPP_CAPABILITY_BATTERY_LEVEL_STATUS;
+		}
+		hidpp->capabilities |= HIDPP_CAPABILITY_HIDPP10_BATTERY;
+	}
+
+	battery_props = devm_kmemdup(&hidpp->hid_dev->dev,
+				     hidpp_battery_props,
+				     sizeof(hidpp_battery_props),
+				     GFP_KERNEL);
+	num_battery_props = ARRAY_SIZE(hidpp_battery_props) - 2;
+
+	if (hidpp->capabilities & HIDPP_CAPABILITY_BATTERY_MILEAGE)
+		battery_props[num_battery_props++] =
+				POWER_SUPPLY_PROP_CAPACITY;
+
+	if (hidpp->capabilities & HIDPP_CAPABILITY_BATTERY_LEVEL_STATUS)
+		battery_props[num_battery_props++] =
+				POWER_SUPPLY_PROP_CAPACITY_LEVEL;
+
+	battery = &hidpp->battery;
+
+	n = atomic_inc_return(&battery_no) - 1;
+	desc->properties = battery_props;
+	desc->num_properties = num_battery_props;
+	desc->get_property = hidpp_battery_get_property;
+	sprintf(battery->name, "hidpp_battery_%ld", n);
+	desc->name = battery->name;
+	desc->type = POWER_SUPPLY_TYPE_BATTERY;
+	desc->use_for_apm = 0;
+
+	battery->ps = devm_power_supply_register(&hidpp->hid_dev->dev,
+						 &battery->desc,
+						 &cfg);
+	if (IS_ERR(battery->ps))
+		return PTR_ERR(battery->ps);
+
+	power_supply_powers(battery->ps, &hidpp->hid_dev->dev);
+
+	return ret;
+}
+
+static void hidpp_overwrite_name(struct hid_device *hdev)
 {
 	struct hidpp_device *hidpp = hid_get_drvdata(hdev);
 	char *name;
 
-	if (use_unifying)
-		/*
-		 * the device is connected through an Unifying receiver, and
-		 * might not be already connected.
-		 * Ask the receiver for its name.
-		 */
-		name = hidpp_get_unifying_name(hidpp);
-	else
-		name = hidpp_get_device_name(hidpp);
+	if (hidpp->protocol_major < 2)
+		return;
+
+	name = hidpp_get_device_name(hidpp);
 
 	if (!name) {
 		hid_err(hdev, "unable to retrieve the name of the device");
@@ -2129,6 +2830,16 @@ static void hidpp_connect_event(struct hidpp_device *hidpp)
 	struct input_dev *input;
 	char *name, *devm_name;
 
+	if (!connected) {
+		if (hidpp->battery.ps) {
+			hidpp->battery.online = false;
+			hidpp->battery.status = POWER_SUPPLY_STATUS_UNKNOWN;
+			hidpp->battery.level = POWER_SUPPLY_CAPACITY_LEVEL_UNKNOWN;
+			power_supply_changed(hidpp->battery.ps);
+		}
+		return;
+	}
+
 	if (hidpp->quirks & HIDPP_QUIRK_CLASS_WTP) {
 		ret = wtp_connect(hdev, connected);
 		if (ret)
@@ -2143,9 +2854,6 @@ static void hidpp_connect_event(struct hidpp_device *hidpp)
 			return;
 	}
 
-	if (!connected || hidpp->delayed_input)
-		return;
-
 	/* the device is already connected, we can ask for its name and
 	 * protocol */
 	if (!hidpp->protocol_major) {
@@ -2158,11 +2866,7 @@ static void hidpp_connect_event(struct hidpp_device *hidpp)
 			 hidpp->protocol_major, hidpp->protocol_minor);
 	}
 
-	if (!(hidpp->quirks & HIDPP_QUIRK_NO_HIDINPUT))
-		/* if HID created the input nodes for us, we can stop now */
-		return;
-
-	if (!hidpp->name || hidpp->name == hdev->name) {
+	if (hidpp->name == hdev->name && hidpp->protocol_major >= 2) {
 		name = hidpp_get_device_name(hidpp);
 		if (!name) {
 			hid_err(hdev,
@@ -2178,6 +2882,25 @@ static void hidpp_connect_event(struct hidpp_device *hidpp)
 		hidpp->name = devm_name;
 	}
 
+	hidpp_initialize_battery(hidpp);
+
+	/* forward current battery state */
+	if (hidpp->capabilities & HIDPP_CAPABILITY_HIDPP10_BATTERY) {
+		hidpp10_enable_battery_reporting(hidpp);
+		if (hidpp->capabilities & HIDPP_CAPABILITY_BATTERY_MILEAGE)
+			hidpp10_query_battery_mileage(hidpp);
+		else
+			hidpp10_query_battery_status(hidpp);
+	} else if (hidpp->capabilities & HIDPP_CAPABILITY_HIDPP20_BATTERY) {
+		hidpp20_query_battery_info(hidpp);
+	}
+	if (hidpp->battery.ps)
+		power_supply_changed(hidpp->battery.ps);
+
+	if (!(hidpp->quirks & HIDPP_QUIRK_NO_HIDINPUT) || hidpp->delayed_input)
+		/* if the input nodes are already created, we can stop now */
+		return;
+
 	input = hidpp_allocate_input(hdev);
 	if (!input) {
 		hid_err(hdev, "cannot allocate new input device: %d\n", ret);
@@ -2193,6 +2916,17 @@ static void hidpp_connect_event(struct hidpp_device *hidpp)
 	hidpp->delayed_input = input;
 }
 
+static DEVICE_ATTR(builtin_power_supply, 0000, NULL, NULL);
+
+static struct attribute *sysfs_attrs[] = {
+	&dev_attr_builtin_power_supply.attr,
+	NULL
+};
+
+static struct attribute_group ps_attribute_group = {
+	.attrs = sysfs_attrs
+};
+
 static int hidpp_probe(struct hid_device *hdev, const struct hid_device_id *id)
 {
 	struct hidpp_device *hidpp;
@@ -2211,9 +2945,11 @@ static int hidpp_probe(struct hid_device *hdev, const struct hid_device_id *id)
 
 	hidpp->quirks = id->driver_data;
 
+	if (id->group == HID_GROUP_LOGITECH_DJ_DEVICE)
+		hidpp->quirks |= HIDPP_QUIRK_UNIFYING;
+
 	if (disable_raw_mode) {
 		hidpp->quirks &= ~HIDPP_QUIRK_CLASS_WTP;
-		hidpp->quirks &= ~HIDPP_QUIRK_CONNECT_EVENTS;
 		hidpp->quirks &= ~HIDPP_QUIRK_NO_HIDINPUT;
 	}
 
@@ -2235,6 +2971,12 @@ static int hidpp_probe(struct hid_device *hdev, const struct hid_device_id *id)
 	mutex_init(&hidpp->send_mutex);
 	init_waitqueue_head(&hidpp->wait);
 
+	/* indicates we are handling the battery properties in the kernel */
+	ret = sysfs_create_group(&hdev->dev.kobj, &ps_attribute_group);
+	if (ret)
+		hid_warn(hdev, "Cannot allocate sysfs group for %s\n",
+			 hdev->name);
+
 	ret = hid_parse(hdev);
 	if (ret) {
 		hid_err(hdev, "%s:parse failed\n", __func__);
@@ -2263,8 +3005,12 @@ static int hidpp_probe(struct hid_device *hdev, const struct hid_device_id *id)
 	/* Allow incoming packets */
 	hid_device_io_start(hdev);
 
+	if (hidpp->quirks & HIDPP_QUIRK_UNIFYING)
+		hidpp_unifying_init(hidpp);
+
 	connected = hidpp_is_connected(hidpp);
-	if (id->group != HID_GROUP_LOGITECH_DJ_DEVICE) {
+	atomic_set(&hidpp->connected, connected);
+	if (!(hidpp->quirks & HIDPP_QUIRK_UNIFYING)) {
 		if (!connected) {
 			ret = -ENODEV;
 			hid_err(hdev, "Device not connected");
@@ -2273,10 +3019,9 @@ static int hidpp_probe(struct hid_device *hdev, const struct hid_device_id *id)
 
 		hid_info(hdev, "HID++ %u.%u device connected.\n",
 			 hidpp->protocol_major, hidpp->protocol_minor);
-	}
 
-	hidpp_overwrite_name(hdev, id->group == HID_GROUP_LOGITECH_DJ_DEVICE);
-	atomic_set(&hidpp->connected, connected);
+		hidpp_overwrite_name(hdev);
+	}
 
 	if (connected && (hidpp->quirks & HIDPP_QUIRK_CLASS_WTP)) {
 		ret = wtp_get_config(hidpp);
@@ -2299,12 +3044,10 @@ static int hidpp_probe(struct hid_device *hdev, const struct hid_device_id *id)
 		}
 	}
 
-	if (hidpp->quirks & HIDPP_QUIRK_CONNECT_EVENTS) {
-		/* Allow incoming packets */
-		hid_device_io_start(hdev);
+	/* Allow incoming packets */
+	hid_device_io_start(hdev);
 
-		hidpp_connect_event(hidpp);
-	}
+	hidpp_connect_event(hidpp);
 
 	return ret;
 
@@ -2316,6 +3059,7 @@ hid_hw_open_failed:
 	}
 hid_hw_start_fail:
 hid_parse_fail:
+	sysfs_remove_group(&hdev->dev.kobj, &ps_attribute_group);
 	cancel_work_sync(&hidpp->work);
 	mutex_destroy(&hidpp->send_mutex);
 allocate_fail:
@@ -2327,6 +3071,8 @@ static void hidpp_remove(struct hid_device *hdev)
 {
 	struct hidpp_device *hidpp = hid_get_drvdata(hdev);
 
+	sysfs_remove_group(&hdev->dev.kobj, &ps_attribute_group);
+
 	if (hidpp->quirks & HIDPP_QUIRK_CLASS_G920) {
 		hidpp_ff_deinit(hdev);
 		hid_hw_close(hdev);
@@ -2357,7 +3103,11 @@ static const struct hid_device_id hidpp_devices[] = {
 	{ /* Keyboard logitech K400 */
 	  HID_DEVICE(BUS_USB, HID_GROUP_LOGITECH_DJ_DEVICE,
 		USB_VENDOR_ID_LOGITECH, 0x4024),
-	  .driver_data = HIDPP_QUIRK_CONNECT_EVENTS | HIDPP_QUIRK_CLASS_K400 },
+	  .driver_data = HIDPP_QUIRK_CLASS_K400 },
+	{ /* Solar Keyboard Logitech K750 */
+	  HID_DEVICE(BUS_USB, HID_GROUP_LOGITECH_DJ_DEVICE,
+		USB_VENDOR_ID_LOGITECH, 0x4002),
+	  .driver_data = HIDPP_QUIRK_CLASS_K750 },
 
 	{ HID_DEVICE(BUS_USB, HID_GROUP_LOGITECH_DJ_DEVICE,
 		USB_VENDOR_ID_LOGITECH, HID_ANY_ID)},
diff --git a/drivers/hid/hid-multitouch.c b/drivers/hid/hid-multitouch.c
index 692647485a53..24d5b6deb571 100644
--- a/drivers/hid/hid-multitouch.c
+++ b/drivers/hid/hid-multitouch.c
@@ -69,6 +69,7 @@ MODULE_LICENSE("GPL");
 #define MT_QUIRK_CONTACT_CNT_ACCURATE	(1 << 12)
 #define MT_QUIRK_FORCE_GET_FEATURE	(1 << 13)
 #define MT_QUIRK_FIX_CONST_CONTACT_ID	(1 << 14)
+#define MT_QUIRK_TOUCH_SIZE_SCALING	(1 << 15)
 
 #define MT_INPUTMODE_TOUCHSCREEN	0x02
 #define MT_INPUTMODE_TOUCHPAD		0x03
@@ -222,7 +223,8 @@ static struct mt_class mt_classes[] = {
 	 */
 	{ .name = MT_CLS_3M,
 		.quirks = MT_QUIRK_VALID_IS_CONFIDENCE |
-			MT_QUIRK_SLOT_IS_CONTACTID,
+			MT_QUIRK_SLOT_IS_CONTACTID |
+			MT_QUIRK_TOUCH_SIZE_SCALING,
 		.sn_move = 2048,
 		.sn_width = 128,
 		.sn_height = 128,
@@ -658,9 +660,17 @@ static void mt_complete_slot(struct mt_device *td, struct input_dev *input)
 		if (active) {
 			/* this finger is in proximity of the sensor */
 			int wide = (s->w > s->h);
-			/* divided by two to match visual scale of touch */
-			int major = max(s->w, s->h) >> 1;
-			int minor = min(s->w, s->h) >> 1;
+			int major = max(s->w, s->h);
+			int minor = min(s->w, s->h);
+
+			/*
+			 * divided by two to match visual scale of touch
+			 * for devices with this quirk
+			 */
+			if (td->mtclass.quirks & MT_QUIRK_TOUCH_SIZE_SCALING) {
+				major = major >> 1;
+				minor = minor >> 1;
+			}
 
 			input_event(input, EV_ABS, ABS_MT_POSITION_X, s->x);
 			input_event(input, EV_ABS, ABS_MT_POSITION_Y, s->y);
diff --git a/drivers/hid/hid-nti.c b/drivers/hid/hid-nti.c
new file mode 100644
index 000000000000..5bb827b223ba
--- /dev/null
+++ b/drivers/hid/hid-nti.c
@@ -0,0 +1,59 @@
+/*
+ *  USB HID quirks support for Network Technologies, Inc. "USB-SUN" USB
+ *  adapter for pre-USB Sun keyboards
+ *
+ *  Copyright (c) 2011 Google, Inc.
+ *
+ * Based on HID apple driver by
+ *  Copyright (c) 1999 Andreas Gal
+ *  Copyright (c) 2000-2005 Vojtech Pavlik <vojtech@suse.cz>
+ *  Copyright (c) 2005 Michael Haboustak <mike-@cinci.rr.com> for Concept2, Inc
+ *  Copyright (c) 2006-2007 Jiri Kosina
+ *  Copyright (c) 2008 Jiri Slaby <jirislaby@gmail.com>
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#include <linux/device.h>
+#include <linux/input.h>
+#include <linux/hid.h>
+#include <linux/module.h>
+
+#include "hid-ids.h"
+
+MODULE_AUTHOR("Jonathan Klabunde Tomer <jktomer@google.com>");
+MODULE_DESCRIPTION("HID driver for Network Technologies USB-SUN keyboard adapter");
+
+/*
+ * NTI Sun keyboard adapter has wrong logical maximum in report descriptor
+ */
+static __u8 *nti_usbsun_report_fixup(struct hid_device *hdev, __u8 *rdesc,
+		unsigned int *rsize)
+{
+	if (*rsize >= 60 && rdesc[53] == 0x65 && rdesc[59] == 0x65) {
+		hid_info(hdev, "fixing up NTI USB-SUN keyboard adapter report descriptor\n");
+		rdesc[53] = rdesc[59] = 0xe7;
+	}
+	return rdesc;
+}
+
+static const struct hid_device_id nti_devices[] = {
+	{ HID_USB_DEVICE(USB_VENDOR_ID_NTI, USB_DEVICE_ID_USB_SUN) },
+	{ }
+};
+MODULE_DEVICE_TABLE(hid, nti_devices);
+
+static struct hid_driver nti_driver = {
+	.name = "nti",
+	.id_table = nti_devices,
+	.report_fixup = nti_usbsun_report_fixup
+};
+
+module_hid_driver(nti_driver);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/hid/hid-sony.c b/drivers/hid/hid-sony.c
index 740996f9bdd4..d03203a82e8f 100644
--- a/drivers/hid/hid-sony.c
+++ b/drivers/hid/hid-sony.c
@@ -48,19 +48,21 @@
 #define PS3REMOTE                 BIT(4)
 #define DUALSHOCK4_CONTROLLER_USB BIT(5)
 #define DUALSHOCK4_CONTROLLER_BT  BIT(6)
-#define MOTION_CONTROLLER_USB     BIT(7)
-#define MOTION_CONTROLLER_BT      BIT(8)
-#define NAVIGATION_CONTROLLER_USB BIT(9)
-#define NAVIGATION_CONTROLLER_BT  BIT(10)
-#define SINO_LITE_CONTROLLER      BIT(11)
-#define FUTUREMAX_DANCE_MAT       BIT(12)
+#define DUALSHOCK4_DONGLE         BIT(7)
+#define MOTION_CONTROLLER_USB     BIT(8)
+#define MOTION_CONTROLLER_BT      BIT(9)
+#define NAVIGATION_CONTROLLER_USB BIT(10)
+#define NAVIGATION_CONTROLLER_BT  BIT(11)
+#define SINO_LITE_CONTROLLER      BIT(12)
+#define FUTUREMAX_DANCE_MAT       BIT(13)
 
 #define SIXAXIS_CONTROLLER (SIXAXIS_CONTROLLER_USB | SIXAXIS_CONTROLLER_BT)
 #define MOTION_CONTROLLER (MOTION_CONTROLLER_USB | MOTION_CONTROLLER_BT)
 #define NAVIGATION_CONTROLLER (NAVIGATION_CONTROLLER_USB |\
 				NAVIGATION_CONTROLLER_BT)
 #define DUALSHOCK4_CONTROLLER (DUALSHOCK4_CONTROLLER_USB |\
-				DUALSHOCK4_CONTROLLER_BT)
+				DUALSHOCK4_CONTROLLER_BT | \
+				DUALSHOCK4_DONGLE)
 #define SONY_LED_SUPPORT (SIXAXIS_CONTROLLER | BUZZ_CONTROLLER |\
 				DUALSHOCK4_CONTROLLER | MOTION_CONTROLLER |\
 				NAVIGATION_CONTROLLER)
@@ -73,89 +75,6 @@
 
 #define MAX_LEDS 4
 
-/*
- * The Sixaxis reports both digital and analog values for each button on the
- * controller except for Start, Select and the PS button.  The controller ends
- * up reporting 27 axes which causes them to spill over into the multi-touch
- * axis values.  Additionally, the controller only has 20 actual, physical axes
- * so there are several unused axes in between the used ones.
- */
-static u8 sixaxis_rdesc[] = {
-	0x05, 0x01,         /*  Usage Page (Desktop),               */
-	0x09, 0x04,         /*  Usage (Joystick),                   */
-	0xA1, 0x01,         /*  Collection (Application),           */
-	0xA1, 0x02,         /*      Collection (Logical),           */
-	0x85, 0x01,         /*          Report ID (1),              */
-	0x75, 0x08,         /*          Report Size (8),            */
-	0x95, 0x01,         /*          Report Count (1),           */
-	0x15, 0x00,         /*          Logical Minimum (0),        */
-	0x26, 0xFF, 0x00,   /*          Logical Maximum (255),      */
-	0x81, 0x03,         /*          Input (Constant, Variable), */
-	0x75, 0x01,         /*          Report Size (1),            */
-	0x95, 0x13,         /*          Report Count (19),          */
-	0x15, 0x00,         /*          Logical Minimum (0),        */
-	0x25, 0x01,         /*          Logical Maximum (1),        */
-	0x35, 0x00,         /*          Physical Minimum (0),       */
-	0x45, 0x01,         /*          Physical Maximum (1),       */
-	0x05, 0x09,         /*          Usage Page (Button),        */
-	0x19, 0x01,         /*          Usage Minimum (01h),        */
-	0x29, 0x13,         /*          Usage Maximum (13h),        */
-	0x81, 0x02,         /*          Input (Variable),           */
-	0x75, 0x01,         /*          Report Size (1),            */
-	0x95, 0x0D,         /*          Report Count (13),          */
-	0x06, 0x00, 0xFF,   /*          Usage Page (FF00h),         */
-	0x81, 0x03,         /*          Input (Constant, Variable), */
-	0x15, 0x00,         /*          Logical Minimum (0),        */
-	0x26, 0xFF, 0x00,   /*          Logical Maximum (255),      */
-	0x05, 0x01,         /*          Usage Page (Desktop),       */
-	0x09, 0x01,         /*          Usage (Pointer),            */
-	0xA1, 0x00,         /*          Collection (Physical),      */
-	0x75, 0x08,         /*              Report Size (8),        */
-	0x95, 0x04,         /*              Report Count (4),       */
-	0x35, 0x00,         /*              Physical Minimum (0),   */
-	0x46, 0xFF, 0x00,   /*              Physical Maximum (255), */
-	0x09, 0x30,         /*              Usage (X),              */
-	0x09, 0x31,         /*              Usage (Y),              */
-	0x09, 0x32,         /*              Usage (Z),              */
-	0x09, 0x35,         /*              Usage (Rz),             */
-	0x81, 0x02,         /*              Input (Variable),       */
-	0xC0,               /*          End Collection,             */
-	0x05, 0x01,         /*          Usage Page (Desktop),       */
-	0x95, 0x13,         /*          Report Count (19),          */
-	0x09, 0x01,         /*          Usage (Pointer),            */
-	0x81, 0x02,         /*          Input (Variable),           */
-	0x95, 0x0C,         /*          Report Count (12),          */
-	0x81, 0x01,         /*          Input (Constant),           */
-	0x75, 0x10,         /*          Report Size (16),           */
-	0x95, 0x04,         /*          Report Count (4),           */
-	0x26, 0xFF, 0x03,   /*          Logical Maximum (1023),     */
-	0x46, 0xFF, 0x03,   /*          Physical Maximum (1023),    */
-	0x09, 0x01,         /*          Usage (Pointer),            */
-	0x81, 0x02,         /*          Input (Variable),           */
-	0xC0,               /*      End Collection,                 */
-	0xA1, 0x02,         /*      Collection (Logical),           */
-	0x85, 0x02,         /*          Report ID (2),              */
-	0x75, 0x08,         /*          Report Size (8),            */
-	0x95, 0x30,         /*          Report Count (48),          */
-	0x09, 0x01,         /*          Usage (Pointer),            */
-	0xB1, 0x02,         /*          Feature (Variable),         */
-	0xC0,               /*      End Collection,                 */
-	0xA1, 0x02,         /*      Collection (Logical),           */
-	0x85, 0xEE,         /*          Report ID (238),            */
-	0x75, 0x08,         /*          Report Size (8),            */
-	0x95, 0x30,         /*          Report Count (48),          */
-	0x09, 0x01,         /*          Usage (Pointer),            */
-	0xB1, 0x02,         /*          Feature (Variable),         */
-	0xC0,               /*      End Collection,                 */
-	0xA1, 0x02,         /*      Collection (Logical),           */
-	0x85, 0xEF,         /*          Report ID (239),            */
-	0x75, 0x08,         /*          Report Size (8),            */
-	0x95, 0x30,         /*          Report Count (48),          */
-	0x09, 0x01,         /*          Usage (Pointer),            */
-	0xB1, 0x02,         /*          Feature (Variable),         */
-	0xC0,               /*      End Collection,                 */
-	0xC0                /*  End Collection                      */
-};
 
 /* PS/3 Motion controller */
 static u8 motion_rdesc[] = {
@@ -254,567 +173,6 @@ static u8 motion_rdesc[] = {
 	0xC0                /*  End Collection                      */
 };
 
-/* PS/3 Navigation controller */
-static u8 navigation_rdesc[] = {
-	0x05, 0x01,         /*  Usage Page (Desktop),               */
-	0x09, 0x04,         /*  Usage (Joystick),                   */
-	0xA1, 0x01,         /*  Collection (Application),           */
-	0xA1, 0x02,         /*      Collection (Logical),           */
-	0x85, 0x01,         /*          Report ID (1),              */
-	0x75, 0x08,         /*          Report Size (8),            */
-	0x95, 0x01,         /*          Report Count (1),           */
-	0x15, 0x00,         /*          Logical Minimum (0),        */
-	0x26, 0xFF, 0x00,   /*          Logical Maximum (255),      */
-	0x81, 0x03,         /*          Input (Constant, Variable), */
-	0x75, 0x01,         /*          Report Size (1),            */
-	0x95, 0x13,         /*          Report Count (19),          */
-	0x15, 0x00,         /*          Logical Minimum (0),        */
-	0x25, 0x01,         /*          Logical Maximum (1),        */
-	0x35, 0x00,         /*          Physical Minimum (0),       */
-	0x45, 0x01,         /*          Physical Maximum (1),       */
-	0x05, 0x09,         /*          Usage Page (Button),        */
-	0x19, 0x01,         /*          Usage Minimum (01h),        */
-	0x29, 0x13,         /*          Usage Maximum (13h),        */
-	0x81, 0x02,         /*          Input (Variable),           */
-	0x75, 0x01,         /*          Report Size (1),            */
-	0x95, 0x0D,         /*          Report Count (13),          */
-	0x06, 0x00, 0xFF,   /*          Usage Page (FF00h),         */
-	0x81, 0x03,         /*          Input (Constant, Variable), */
-	0x15, 0x00,         /*          Logical Minimum (0),        */
-	0x26, 0xFF, 0x00,   /*          Logical Maximum (255),      */
-	0x05, 0x01,         /*          Usage Page (Desktop),       */
-	0x09, 0x01,         /*          Usage (Pointer),            */
-	0xA1, 0x00,         /*          Collection (Physical),      */
-	0x75, 0x08,         /*              Report Size (8),        */
-	0x95, 0x02,         /*              Report Count (2),       */
-	0x35, 0x00,         /*              Physical Minimum (0),   */
-	0x46, 0xFF, 0x00,   /*              Physical Maximum (255), */
-	0x09, 0x30,         /*              Usage (X),              */
-	0x09, 0x31,         /*              Usage (Y),              */
-	0x81, 0x02,         /*              Input (Variable),       */
-	0xC0,               /*          End Collection,             */
-	0x06, 0x00, 0xFF,   /*          Usage Page (FF00h),         */
-	0x95, 0x06,         /*          Report Count (6),           */
-	0x81, 0x03,         /*          Input (Constant, Variable), */
-	0x05, 0x01,         /*          Usage Page (Desktop),       */
-	0x75, 0x08,         /*          Report Size (8),            */
-	0x95, 0x05,         /*          Report Count (5),           */
-	0x09, 0x01,         /*          Usage (Pointer),            */
-	0x81, 0x02,         /*          Input (Variable),           */
-	0x06, 0x00, 0xFF,   /*          Usage Page (FF00h),         */
-	0x95, 0x01,         /*          Report Count (1),           */
-	0x81, 0x02,         /*          Input (Variable),           */
-	0x05, 0x01,         /*          Usage Page (Desktop),       */
-	0x95, 0x01,         /*          Report Count (1),           */
-	0x09, 0x01,         /*          Usage (Pointer),            */
-	0x81, 0x02,         /*          Input (Variable),           */
-	0x06, 0x00, 0xFF,   /*          Usage Page (FF00h),         */
-	0x95, 0x1E,         /*          Report Count (24),          */
-	0x81, 0x02,         /*          Input (Variable),           */
-	0x75, 0x08,         /*          Report Size (8),            */
-	0x95, 0x30,         /*          Report Count (48),          */
-	0x09, 0x01,         /*          Usage (Pointer),            */
-	0x91, 0x02,         /*          Output (Variable),          */
-	0x75, 0x08,         /*          Report Size (8),            */
-	0x95, 0x30,         /*          Report Count (48),          */
-	0x09, 0x01,         /*          Usage (Pointer),            */
-	0xB1, 0x02,         /*          Feature (Variable),         */
-	0xC0,               /*      End Collection,                 */
-	0xA1, 0x02,         /*      Collection (Logical),           */
-	0x85, 0x02,         /*          Report ID (2),              */
-	0x75, 0x08,         /*          Report Size (8),            */
-	0x95, 0x30,         /*          Report Count (48),          */
-	0x09, 0x01,         /*          Usage (Pointer),            */
-	0xB1, 0x02,         /*          Feature (Variable),         */
-	0xC0,               /*      End Collection,                 */
-	0xA1, 0x02,         /*      Collection (Logical),           */
-	0x85, 0xEE,         /*          Report ID (238),            */
-	0x75, 0x08,         /*          Report Size (8),            */
-	0x95, 0x30,         /*          Report Count (48),          */
-	0x09, 0x01,         /*          Usage (Pointer),            */
-	0xB1, 0x02,         /*          Feature (Variable),         */
-	0xC0,               /*      End Collection,                 */
-	0xA1, 0x02,         /*      Collection (Logical),           */
-	0x85, 0xEF,         /*          Report ID (239),            */
-	0x75, 0x08,         /*          Report Size (8),            */
-	0x95, 0x30,         /*          Report Count (48),          */
-	0x09, 0x01,         /*          Usage (Pointer),            */
-	0xB1, 0x02,         /*          Feature (Variable),         */
-	0xC0,               /*      End Collection,                 */
-	0xC0                /*  End Collection                      */
-};
-
-/*
- * The default descriptor doesn't provide mapping for the accelerometers
- * or orientation sensors.  This fixed descriptor maps the accelerometers
- * to usage values 0x40, 0x41 and 0x42 and maps the orientation sensors
- * to usage values 0x43, 0x44 and 0x45.
- */
-static u8 dualshock4_usb_rdesc[] = {
-	0x05, 0x01,         /*  Usage Page (Desktop),               */
-	0x09, 0x05,         /*  Usage (Gamepad),                    */
-	0xA1, 0x01,         /*  Collection (Application),           */
-	0x85, 0x01,         /*      Report ID (1),                  */
-	0x09, 0x30,         /*      Usage (X),                      */
-	0x09, 0x31,         /*      Usage (Y),                      */
-	0x09, 0x32,         /*      Usage (Z),                      */
-	0x09, 0x35,         /*      Usage (Rz),                     */
-	0x15, 0x00,         /*      Logical Minimum (0),            */
-	0x26, 0xFF, 0x00,   /*      Logical Maximum (255),          */
-	0x75, 0x08,         /*      Report Size (8),                */
-	0x95, 0x04,         /*      Report Count (4),               */
-	0x81, 0x02,         /*      Input (Variable),               */
-	0x09, 0x39,         /*      Usage (Hat Switch),             */
-	0x15, 0x00,         /*      Logical Minimum (0),            */
-	0x25, 0x07,         /*      Logical Maximum (7),            */
-	0x35, 0x00,         /*      Physical Minimum (0),           */
-	0x46, 0x3B, 0x01,   /*      Physical Maximum (315),         */
-	0x65, 0x14,         /*      Unit (Degrees),                 */
-	0x75, 0x04,         /*      Report Size (4),                */
-	0x95, 0x01,         /*      Report Count (1),               */
-	0x81, 0x42,         /*      Input (Variable, Null State),   */
-	0x65, 0x00,         /*      Unit,                           */
-	0x05, 0x09,         /*      Usage Page (Button),            */
-	0x19, 0x01,         /*      Usage Minimum (01h),            */
-	0x29, 0x0D,         /*      Usage Maximum (0Dh),            */
-	0x15, 0x00,         /*      Logical Minimum (0),            */
-	0x25, 0x01,         /*      Logical Maximum (1),            */
-	0x75, 0x01,         /*      Report Size (1),                */
-	0x95, 0x0E,         /*      Report Count (14),              */
-	0x81, 0x02,         /*      Input (Variable),               */
-	0x06, 0x00, 0xFF,   /*      Usage Page (FF00h),             */
-	0x09, 0x20,         /*      Usage (20h),                    */
-	0x75, 0x06,         /*      Report Size (6),                */
-	0x95, 0x01,         /*      Report Count (1),               */
-	0x15, 0x00,         /*      Logical Minimum (0),            */
-	0x25, 0x3F,         /*      Logical Maximum (63),           */
-	0x81, 0x02,         /*      Input (Variable),               */
-	0x05, 0x01,         /*      Usage Page (Desktop),           */
-	0x09, 0x33,         /*      Usage (Rx),                     */
-	0x09, 0x34,         /*      Usage (Ry),                     */
-	0x15, 0x00,         /*      Logical Minimum (0),            */
-	0x26, 0xFF, 0x00,   /*      Logical Maximum (255),          */
-	0x75, 0x08,         /*      Report Size (8),                */
-	0x95, 0x02,         /*      Report Count (2),               */
-	0x81, 0x02,         /*      Input (Variable),               */
-	0x06, 0x00, 0xFF,   /*      Usage Page (FF00h),             */
-	0x09, 0x21,         /*      Usage (21h),                    */
-	0x95, 0x03,         /*      Report Count (3),               */
-	0x81, 0x02,         /*      Input (Variable),               */
-	0x05, 0x01,         /*      Usage Page (Desktop),           */
-	0x19, 0x40,         /*      Usage Minimum (40h),            */
-	0x29, 0x42,         /*      Usage Maximum (42h),            */
-	0x16, 0x00, 0x80,   /*      Logical Minimum (-32768),       */
-	0x26, 0xFF, 0x7F,   /*      Logical Maximum (32767),        */
-	0x75, 0x10,         /*      Report Size (16),               */
-	0x95, 0x03,         /*      Report Count (3),               */
-	0x81, 0x02,         /*      Input (Variable),               */
-	0x19, 0x43,         /*      Usage Minimum (43h),            */
-	0x29, 0x45,         /*      Usage Maximum (45h),            */
-	0x16, 0x00, 0x80,   /*      Logical Minimum (-32768),       */
-	0x26, 0xFF, 0x7F,   /*      Logical Maximum (32767),        */
-	0x95, 0x03,         /*      Report Count (3),               */
-	0x81, 0x02,         /*      Input (Variable),               */
-	0x06, 0x00, 0xFF,   /*      Usage Page (FF00h),             */
-	0x09, 0x21,         /*      Usage (21h),                    */
-	0x15, 0x00,         /*      Logical Minimum (0),            */
-	0x26, 0xFF, 0x00,   /*      Logical Maximum (255),          */
-	0x75, 0x08,         /*      Report Size (8),                */
-	0x95, 0x27,         /*      Report Count (39),              */
-	0x81, 0x02,         /*      Input (Variable),               */
-	0x85, 0x05,         /*      Report ID (5),                  */
-	0x09, 0x22,         /*      Usage (22h),                    */
-	0x95, 0x1F,         /*      Report Count (31),              */
-	0x91, 0x02,         /*      Output (Variable),              */
-	0x85, 0x04,         /*      Report ID (4),                  */
-	0x09, 0x23,         /*      Usage (23h),                    */
-	0x95, 0x24,         /*      Report Count (36),              */
-	0xB1, 0x02,         /*      Feature (Variable),             */
-	0x85, 0x02,         /*      Report ID (2),                  */
-	0x09, 0x24,         /*      Usage (24h),                    */
-	0x95, 0x24,         /*      Report Count (36),              */
-	0xB1, 0x02,         /*      Feature (Variable),             */
-	0x85, 0x08,         /*      Report ID (8),                  */
-	0x09, 0x25,         /*      Usage (25h),                    */
-	0x95, 0x03,         /*      Report Count (3),               */
-	0xB1, 0x02,         /*      Feature (Variable),             */
-	0x85, 0x10,         /*      Report ID (16),                 */
-	0x09, 0x26,         /*      Usage (26h),                    */
-	0x95, 0x04,         /*      Report Count (4),               */
-	0xB1, 0x02,         /*      Feature (Variable),             */
-	0x85, 0x11,         /*      Report ID (17),                 */
-	0x09, 0x27,         /*      Usage (27h),                    */
-	0x95, 0x02,         /*      Report Count (2),               */
-	0xB1, 0x02,         /*      Feature (Variable),             */
-	0x85, 0x12,         /*      Report ID (18),                 */
-	0x06, 0x02, 0xFF,   /*      Usage Page (FF02h),             */
-	0x09, 0x21,         /*      Usage (21h),                    */
-	0x95, 0x0F,         /*      Report Count (15),              */
-	0xB1, 0x02,         /*      Feature (Variable),             */
-	0x85, 0x13,         /*      Report ID (19),                 */
-	0x09, 0x22,         /*      Usage (22h),                    */
-	0x95, 0x16,         /*      Report Count (22),              */
-	0xB1, 0x02,         /*      Feature (Variable),             */
-	0x85, 0x14,         /*      Report ID (20),                 */
-	0x06, 0x05, 0xFF,   /*      Usage Page (FF05h),             */
-	0x09, 0x20,         /*      Usage (20h),                    */
-	0x95, 0x10,         /*      Report Count (16),              */
-	0xB1, 0x02,         /*      Feature (Variable),             */
-	0x85, 0x15,         /*      Report ID (21),                 */
-	0x09, 0x21,         /*      Usage (21h),                    */
-	0x95, 0x2C,         /*      Report Count (44),              */
-	0xB1, 0x02,         /*      Feature (Variable),             */
-	0x06, 0x80, 0xFF,   /*      Usage Page (FF80h),             */
-	0x85, 0x80,         /*      Report ID (128),                */
-	0x09, 0x20,         /*      Usage (20h),                    */
-	0x95, 0x06,         /*      Report Count (6),               */
-	0xB1, 0x02,         /*      Feature (Variable),             */
-	0x85, 0x81,         /*      Report ID (129),                */
-	0x09, 0x21,         /*      Usage (21h),                    */
-	0x95, 0x06,         /*      Report Count (6),               */
-	0xB1, 0x02,         /*      Feature (Variable),             */
-	0x85, 0x82,         /*      Report ID (130),                */
-	0x09, 0x22,         /*      Usage (22h),                    */
-	0x95, 0x05,         /*      Report Count (5),               */
-	0xB1, 0x02,         /*      Feature (Variable),             */
-	0x85, 0x83,         /*      Report ID (131),                */
-	0x09, 0x23,         /*      Usage (23h),                    */
-	0x95, 0x01,         /*      Report Count (1),               */
-	0xB1, 0x02,         /*      Feature (Variable),             */
-	0x85, 0x84,         /*      Report ID (132),                */
-	0x09, 0x24,         /*      Usage (24h),                    */
-	0x95, 0x04,         /*      Report Count (4),               */
-	0xB1, 0x02,         /*      Feature (Variable),             */
-	0x85, 0x85,         /*      Report ID (133),                */
-	0x09, 0x25,         /*      Usage (25h),                    */
-	0x95, 0x06,         /*      Report Count (6),               */
-	0xB1, 0x02,         /*      Feature (Variable),             */
-	0x85, 0x86,         /*      Report ID (134),                */
-	0x09, 0x26,         /*      Usage (26h),                    */
-	0x95, 0x06,         /*      Report Count (6),               */
-	0xB1, 0x02,         /*      Feature (Variable),             */
-	0x85, 0x87,         /*      Report ID (135),                */
-	0x09, 0x27,         /*      Usage (27h),                    */
-	0x95, 0x23,         /*      Report Count (35),              */
-	0xB1, 0x02,         /*      Feature (Variable),             */
-	0x85, 0x88,         /*      Report ID (136),                */
-	0x09, 0x28,         /*      Usage (28h),                    */
-	0x95, 0x22,         /*      Report Count (34),              */
-	0xB1, 0x02,         /*      Feature (Variable),             */
-	0x85, 0x89,         /*      Report ID (137),                */
-	0x09, 0x29,         /*      Usage (29h),                    */
-	0x95, 0x02,         /*      Report Count (2),               */
-	0xB1, 0x02,         /*      Feature (Variable),             */
-	0x85, 0x90,         /*      Report ID (144),                */
-	0x09, 0x30,         /*      Usage (30h),                    */
-	0x95, 0x05,         /*      Report Count (5),               */
-	0xB1, 0x02,         /*      Feature (Variable),             */
-	0x85, 0x91,         /*      Report ID (145),                */
-	0x09, 0x31,         /*      Usage (31h),                    */
-	0x95, 0x03,         /*      Report Count (3),               */
-	0xB1, 0x02,         /*      Feature (Variable),             */
-	0x85, 0x92,         /*      Report ID (146),                */
-	0x09, 0x32,         /*      Usage (32h),                    */
-	0x95, 0x03,         /*      Report Count (3),               */
-	0xB1, 0x02,         /*      Feature (Variable),             */
-	0x85, 0x93,         /*      Report ID (147),                */
-	0x09, 0x33,         /*      Usage (33h),                    */
-	0x95, 0x0C,         /*      Report Count (12),              */
-	0xB1, 0x02,         /*      Feature (Variable),             */
-	0x85, 0xA0,         /*      Report ID (160),                */
-	0x09, 0x40,         /*      Usage (40h),                    */
-	0x95, 0x06,         /*      Report Count (6),               */
-	0xB1, 0x02,         /*      Feature (Variable),             */
-	0x85, 0xA1,         /*      Report ID (161),                */
-	0x09, 0x41,         /*      Usage (41h),                    */
-	0x95, 0x01,         /*      Report Count (1),               */
-	0xB1, 0x02,         /*      Feature (Variable),             */
-	0x85, 0xA2,         /*      Report ID (162),                */
-	0x09, 0x42,         /*      Usage (42h),                    */
-	0x95, 0x01,         /*      Report Count (1),               */
-	0xB1, 0x02,         /*      Feature (Variable),             */
-	0x85, 0xA3,         /*      Report ID (163),                */
-	0x09, 0x43,         /*      Usage (43h),                    */
-	0x95, 0x30,         /*      Report Count (48),              */
-	0xB1, 0x02,         /*      Feature (Variable),             */
-	0x85, 0xA4,         /*      Report ID (164),                */
-	0x09, 0x44,         /*      Usage (44h),                    */
-	0x95, 0x0D,         /*      Report Count (13),              */
-	0xB1, 0x02,         /*      Feature (Variable),             */
-	0x85, 0xA5,         /*      Report ID (165),                */
-	0x09, 0x45,         /*      Usage (45h),                    */
-	0x95, 0x15,         /*      Report Count (21),              */
-	0xB1, 0x02,         /*      Feature (Variable),             */
-	0x85, 0xA6,         /*      Report ID (166),                */
-	0x09, 0x46,         /*      Usage (46h),                    */
-	0x95, 0x15,         /*      Report Count (21),              */
-	0xB1, 0x02,         /*      Feature (Variable),             */
-	0x85, 0xF0,         /*      Report ID (240),                */
-	0x09, 0x47,         /*      Usage (47h),                    */
-	0x95, 0x3F,         /*      Report Count (63),              */
-	0xB1, 0x02,         /*      Feature (Variable),             */
-	0x85, 0xF1,         /*      Report ID (241),                */
-	0x09, 0x48,         /*      Usage (48h),                    */
-	0x95, 0x3F,         /*      Report Count (63),              */
-	0xB1, 0x02,         /*      Feature (Variable),             */
-	0x85, 0xF2,         /*      Report ID (242),                */
-	0x09, 0x49,         /*      Usage (49h),                    */
-	0x95, 0x0F,         /*      Report Count (15),              */
-	0xB1, 0x02,         /*      Feature (Variable),             */
-	0x85, 0xA7,         /*      Report ID (167),                */
-	0x09, 0x4A,         /*      Usage (4Ah),                    */
-	0x95, 0x01,         /*      Report Count (1),               */
-	0xB1, 0x02,         /*      Feature (Variable),             */
-	0x85, 0xA8,         /*      Report ID (168),                */
-	0x09, 0x4B,         /*      Usage (4Bh),                    */
-	0x95, 0x01,         /*      Report Count (1),               */
-	0xB1, 0x02,         /*      Feature (Variable),             */
-	0x85, 0xA9,         /*      Report ID (169),                */
-	0x09, 0x4C,         /*      Usage (4Ch),                    */
-	0x95, 0x08,         /*      Report Count (8),               */
-	0xB1, 0x02,         /*      Feature (Variable),             */
-	0x85, 0xAA,         /*      Report ID (170),                */
-	0x09, 0x4E,         /*      Usage (4Eh),                    */
-	0x95, 0x01,         /*      Report Count (1),               */
-	0xB1, 0x02,         /*      Feature (Variable),             */
-	0x85, 0xAB,         /*      Report ID (171),                */
-	0x09, 0x4F,         /*      Usage (4Fh),                    */
-	0x95, 0x39,         /*      Report Count (57),              */
-	0xB1, 0x02,         /*      Feature (Variable),             */
-	0x85, 0xAC,         /*      Report ID (172),                */
-	0x09, 0x50,         /*      Usage (50h),                    */
-	0x95, 0x39,         /*      Report Count (57),              */
-	0xB1, 0x02,         /*      Feature (Variable),             */
-	0x85, 0xAD,         /*      Report ID (173),                */
-	0x09, 0x51,         /*      Usage (51h),                    */
-	0x95, 0x0B,         /*      Report Count (11),              */
-	0xB1, 0x02,         /*      Feature (Variable),             */
-	0x85, 0xAE,         /*      Report ID (174),                */
-	0x09, 0x52,         /*      Usage (52h),                    */
-	0x95, 0x01,         /*      Report Count (1),               */
-	0xB1, 0x02,         /*      Feature (Variable),             */
-	0x85, 0xAF,         /*      Report ID (175),                */
-	0x09, 0x53,         /*      Usage (53h),                    */
-	0x95, 0x02,         /*      Report Count (2),               */
-	0xB1, 0x02,         /*      Feature (Variable),             */
-	0x85, 0xB0,         /*      Report ID (176),                */
-	0x09, 0x54,         /*      Usage (54h),                    */
-	0x95, 0x3F,         /*      Report Count (63),              */
-	0xB1, 0x02,         /*      Feature (Variable),             */
-	0xC0                /*  End Collection                      */
-};
-
-/*
- * The default behavior of the Dualshock 4 is to send reports using report
- * type 1 when running over Bluetooth. However, when feature report 2 is
- * requested during the controller initialization it starts sending input
- * reports in report 17.  Since report 17 is undefined in the default HID
- * descriptor the button and axis definitions must be moved to report 17 or
- * the HID layer won't process the received input.
- */
-static u8 dualshock4_bt_rdesc[] = {
-	0x05, 0x01,         /*  Usage Page (Desktop),               */
-	0x09, 0x05,         /*  Usage (Gamepad),                    */
-	0xA1, 0x01,         /*  Collection (Application),           */
-	0x85, 0x01,         /*      Report ID (1),                  */
-	0x75, 0x08,         /*      Report Size (8),                */
-	0x95, 0x0A,         /*      Report Count (9),               */
-	0x81, 0x02,         /*      Input (Variable),               */
-	0x06, 0x04, 0xFF,   /*      Usage Page (FF04h),             */
-	0x85, 0x02,         /*      Report ID (2),                  */
-	0x09, 0x24,         /*      Usage (24h),                    */
-	0x95, 0x24,         /*      Report Count (36),              */
-	0xB1, 0x02,         /*      Feature (Variable),             */
-	0x85, 0xA3,         /*      Report ID (163),                */
-	0x09, 0x25,         /*      Usage (25h),                    */
-	0x95, 0x30,         /*      Report Count (48),              */
-	0xB1, 0x02,         /*      Feature (Variable),             */
-	0x85, 0x05,         /*      Report ID (5),                  */
-	0x09, 0x26,         /*      Usage (26h),                    */
-	0x95, 0x28,         /*      Report Count (40),              */
-	0xB1, 0x02,         /*      Feature (Variable),             */
-	0x85, 0x06,         /*      Report ID (6),                  */
-	0x09, 0x27,         /*      Usage (27h),                    */
-	0x95, 0x34,         /*      Report Count (52),              */
-	0xB1, 0x02,         /*      Feature (Variable),             */
-	0x85, 0x07,         /*      Report ID (7),                  */
-	0x09, 0x28,         /*      Usage (28h),                    */
-	0x95, 0x30,         /*      Report Count (48),              */
-	0xB1, 0x02,         /*      Feature (Variable),             */
-	0x85, 0x08,         /*      Report ID (8),                  */
-	0x09, 0x29,         /*      Usage (29h),                    */
-	0x95, 0x2F,         /*      Report Count (47),              */
-	0xB1, 0x02,         /*      Feature (Variable),             */
-	0x06, 0x03, 0xFF,   /*      Usage Page (FF03h),             */
-	0x85, 0x03,         /*      Report ID (3),                  */
-	0x09, 0x21,         /*      Usage (21h),                    */
-	0x95, 0x26,         /*      Report Count (38),              */
-	0xB1, 0x02,         /*      Feature (Variable),             */
-	0x85, 0x04,         /*      Report ID (4),                  */
-	0x09, 0x22,         /*      Usage (22h),                    */
-	0x95, 0x2E,         /*      Report Count (46),              */
-	0xB1, 0x02,         /*      Feature (Variable),             */
-	0x85, 0xF0,         /*      Report ID (240),                */
-	0x09, 0x47,         /*      Usage (47h),                    */
-	0x95, 0x3F,         /*      Report Count (63),              */
-	0xB1, 0x02,         /*      Feature (Variable),             */
-	0x85, 0xF1,         /*      Report ID (241),                */
-	0x09, 0x48,         /*      Usage (48h),                    */
-	0x95, 0x3F,         /*      Report Count (63),              */
-	0xB1, 0x02,         /*      Feature (Variable),             */
-	0x85, 0xF2,         /*      Report ID (242),                */
-	0x09, 0x49,         /*      Usage (49h),                    */
-	0x95, 0x0F,         /*      Report Count (15),              */
-	0xB1, 0x02,         /*      Feature (Variable),             */
-	0x85, 0x11,         /*      Report ID (17),                 */
-	0x06, 0x00, 0xFF,   /*      Usage Page (FF00h),             */
-	0x09, 0x20,         /*      Usage (20h),                    */
-	0x95, 0x02,         /*      Report Count (2),               */
-	0x81, 0x02,         /*      Input (Variable),               */
-	0x05, 0x01,         /*      Usage Page (Desktop),           */
-	0x09, 0x30,         /*      Usage (X),                      */
-	0x09, 0x31,         /*      Usage (Y),                      */
-	0x09, 0x32,         /*      Usage (Z),                      */
-	0x09, 0x35,         /*      Usage (Rz),                     */
-	0x15, 0x00,         /*      Logical Minimum (0),            */
-	0x26, 0xFF, 0x00,   /*      Logical Maximum (255),          */
-	0x75, 0x08,         /*      Report Size (8),                */
-	0x95, 0x04,         /*      Report Count (4),               */
-	0x81, 0x02,         /*      Input (Variable),               */
-	0x09, 0x39,         /*      Usage (Hat Switch),             */
-	0x15, 0x00,         /*      Logical Minimum (0),            */
-	0x25, 0x07,         /*      Logical Maximum (7),            */
-	0x75, 0x04,         /*      Report Size (4),                */
-	0x95, 0x01,         /*      Report Count (1),               */
-	0x81, 0x42,         /*      Input (Variable, Null State),   */
-	0x05, 0x09,         /*      Usage Page (Button),            */
-	0x19, 0x01,         /*      Usage Minimum (01h),            */
-	0x29, 0x0D,         /*      Usage Maximum (0Dh),            */
-	0x15, 0x00,         /*      Logical Minimum (0),            */
-	0x25, 0x01,         /*      Logical Maximum (1),            */
-	0x75, 0x01,         /*      Report Size (1),                */
-	0x95, 0x0E,         /*      Report Count (14),              */
-	0x81, 0x02,         /*      Input (Variable),               */
-	0x75, 0x06,         /*      Report Size (6),                */
-	0x95, 0x01,         /*      Report Count (1),               */
-	0x81, 0x01,         /*      Input (Constant),               */
-	0x05, 0x01,         /*      Usage Page (Desktop),           */
-	0x09, 0x33,         /*      Usage (Rx),                     */
-	0x09, 0x34,         /*      Usage (Ry),                     */
-	0x15, 0x00,         /*      Logical Minimum (0),            */
-	0x26, 0xFF, 0x00,   /*      Logical Maximum (255),          */
-	0x75, 0x08,         /*      Report Size (8),                */
-	0x95, 0x02,         /*      Report Count (2),               */
-	0x81, 0x02,         /*      Input (Variable),               */
-	0x06, 0x00, 0xFF,   /*      Usage Page (FF00h),             */
-	0x09, 0x20,         /*      Usage (20h),                    */
-	0x95, 0x03,         /*      Report Count (3),               */
-	0x81, 0x02,         /*      Input (Variable),               */
-	0x05, 0x01,         /*      Usage Page (Desktop),           */
-	0x19, 0x40,         /*      Usage Minimum (40h),            */
-	0x29, 0x42,         /*      Usage Maximum (42h),            */
-	0x16, 0x00, 0x80,   /*      Logical Minimum (-32768),       */
-	0x26, 0xFF, 0x7F,   /*      Logical Maximum (32767),        */
-	0x75, 0x10,         /*      Report Size (16),               */
-	0x95, 0x03,         /*      Report Count (3),               */
-	0x81, 0x02,         /*      Input (Variable),               */
-	0x19, 0x43,         /*      Usage Minimum (43h),            */
-	0x29, 0x45,         /*      Usage Maximum (45h),            */
-	0x16, 0x00, 0x80,   /*      Logical Minimum (-32768),       */
-	0x26, 0xFF, 0x7F,   /*      Logical Maximum (32767),        */
-	0x95, 0x03,         /*      Report Count (3),               */
-	0x81, 0x02,         /*      Input (Variable),               */
-	0x06, 0x00, 0xFF,   /*      Usage Page (FF00h),             */
-	0x09, 0x20,         /*      Usage (20h),                    */
-	0x15, 0x00,         /*      Logical Minimum (0),            */
-	0x26, 0xFF, 0x00,   /*      Logical Maximum (255),          */
-	0x75, 0x08,         /*      Report Size (8),                */
-	0x95, 0x31,         /*      Report Count (51),              */
-	0x81, 0x02,         /*      Input (Variable),               */
-	0x09, 0x21,         /*      Usage (21h),                    */
-	0x75, 0x08,         /*      Report Size (8),                */
-	0x95, 0x4D,         /*      Report Count (77),              */
-	0x91, 0x02,         /*      Output (Variable),              */
-	0x85, 0x12,         /*      Report ID (18),                 */
-	0x09, 0x22,         /*      Usage (22h),                    */
-	0x95, 0x8D,         /*      Report Count (141),             */
-	0x81, 0x02,         /*      Input (Variable),               */
-	0x09, 0x23,         /*      Usage (23h),                    */
-	0x91, 0x02,         /*      Output (Variable),              */
-	0x85, 0x13,         /*      Report ID (19),                 */
-	0x09, 0x24,         /*      Usage (24h),                    */
-	0x95, 0xCD,         /*      Report Count (205),             */
-	0x81, 0x02,         /*      Input (Variable),               */
-	0x09, 0x25,         /*      Usage (25h),                    */
-	0x91, 0x02,         /*      Output (Variable),              */
-	0x85, 0x14,         /*      Report ID (20),                 */
-	0x09, 0x26,         /*      Usage (26h),                    */
-	0x96, 0x0D, 0x01,   /*      Report Count (269),             */
-	0x81, 0x02,         /*      Input (Variable),               */
-	0x09, 0x27,         /*      Usage (27h),                    */
-	0x91, 0x02,         /*      Output (Variable),              */
-	0x85, 0x15,         /*      Report ID (21),                 */
-	0x09, 0x28,         /*      Usage (28h),                    */
-	0x96, 0x4D, 0x01,   /*      Report Count (333),             */
-	0x81, 0x02,         /*      Input (Variable),               */
-	0x09, 0x29,         /*      Usage (29h),                    */
-	0x91, 0x02,         /*      Output (Variable),              */
-	0x85, 0x16,         /*      Report ID (22),                 */
-	0x09, 0x2A,         /*      Usage (2Ah),                    */
-	0x96, 0x8D, 0x01,   /*      Report Count (397),             */
-	0x81, 0x02,         /*      Input (Variable),               */
-	0x09, 0x2B,         /*      Usage (2Bh),                    */
-	0x91, 0x02,         /*      Output (Variable),              */
-	0x85, 0x17,         /*      Report ID (23),                 */
-	0x09, 0x2C,         /*      Usage (2Ch),                    */
-	0x96, 0xCD, 0x01,   /*      Report Count (461),             */
-	0x81, 0x02,         /*      Input (Variable),               */
-	0x09, 0x2D,         /*      Usage (2Dh),                    */
-	0x91, 0x02,         /*      Output (Variable),              */
-	0x85, 0x18,         /*      Report ID (24),                 */
-	0x09, 0x2E,         /*      Usage (2Eh),                    */
-	0x96, 0x0D, 0x02,   /*      Report Count (525),             */
-	0x81, 0x02,         /*      Input (Variable),               */
-	0x09, 0x2F,         /*      Usage (2Fh),                    */
-	0x91, 0x02,         /*      Output (Variable),              */
-	0x85, 0x19,         /*      Report ID (25),                 */
-	0x09, 0x30,         /*      Usage (30h),                    */
-	0x96, 0x22, 0x02,   /*      Report Count (546),             */
-	0x81, 0x02,         /*      Input (Variable),               */
-	0x09, 0x31,         /*      Usage (31h),                    */
-	0x91, 0x02,         /*      Output (Variable),              */
-	0x06, 0x80, 0xFF,   /*      Usage Page (FF80h),             */
-	0x85, 0x82,         /*      Report ID (130),                */
-	0x09, 0x22,         /*      Usage (22h),                    */
-	0x95, 0x3F,         /*      Report Count (63),              */
-	0xB1, 0x02,         /*      Feature (Variable),             */
-	0x85, 0x83,         /*      Report ID (131),                */
-	0x09, 0x23,         /*      Usage (23h),                    */
-	0xB1, 0x02,         /*      Feature (Variable),             */
-	0x85, 0x84,         /*      Report ID (132),                */
-	0x09, 0x24,         /*      Usage (24h),                    */
-	0xB1, 0x02,         /*      Feature (Variable),             */
-	0x85, 0x90,         /*      Report ID (144),                */
-	0x09, 0x30,         /*      Usage (30h),                    */
-	0xB1, 0x02,         /*      Feature (Variable),             */
-	0x85, 0x91,         /*      Report ID (145),                */
-	0x09, 0x31,         /*      Usage (31h),                    */
-	0xB1, 0x02,         /*      Feature (Variable),             */
-	0x85, 0x92,         /*      Report ID (146),                */
-	0x09, 0x32,         /*      Usage (32h),                    */
-	0xB1, 0x02,         /*      Feature (Variable),             */
-	0x85, 0x93,         /*      Report ID (147),                */
-	0x09, 0x33,         /*      Usage (33h),                    */
-	0xB1, 0x02,         /*      Feature (Variable),             */
-	0x85, 0xA0,         /*      Report ID (160),                */
-	0x09, 0x40,         /*      Usage (40h),                    */
-	0xB1, 0x02,         /*      Feature (Variable),             */
-	0x85, 0xA4,         /*      Report ID (164),                */
-	0x09, 0x44,         /*      Usage (44h),                    */
-	0xB1, 0x02,         /*      Feature (Variable),             */
-	0xC0                /*  End Collection                      */
-};
-
 static u8 ps3remote_rdesc[] = {
 	0x05, 0x01,          /* GUsagePage Generic Desktop */
 	0x09, 0x05,          /* LUsage 0x05 [Game Pad] */
@@ -977,6 +335,67 @@ static const unsigned int buzz_keymap[] = {
 	[20] = BTN_TRIGGER_HAPPY20,
 };
 
+/* The Navigation controller is a partial DS3 and uses the same HID report
+ * and hence the same keymap indices, however not not all axes/buttons
+ * are physically present. We use the same axis and button mapping as
+ * the DS3, which uses the Linux gamepad spec.
+ */
+static const unsigned int navigation_absmap[] = {
+	[0x30] = ABS_X,
+	[0x31] = ABS_Y,
+	[0x33] = ABS_Z, /* L2 */
+};
+
+/* Buttons not physically available on the device, but still available
+ * in the reports are explicitly set to 0 for documentation purposes.
+ */
+static const unsigned int navigation_keymap[] = {
+	[0x01] = 0, /* Select */
+	[0x02] = BTN_THUMBL, /* L3 */
+	[0x03] = 0, /* R3 */
+	[0x04] = 0, /* Start */
+	[0x05] = BTN_DPAD_UP, /* Up */
+	[0x06] = BTN_DPAD_RIGHT, /* Right */
+	[0x07] = BTN_DPAD_DOWN, /* Down */
+	[0x08] = BTN_DPAD_LEFT, /* Left */
+	[0x09] = BTN_TL2, /* L2 */
+	[0x0a] = 0, /* R2 */
+	[0x0b] = BTN_TL, /* L1 */
+	[0x0c] = 0, /* R1 */
+	[0x0d] = BTN_NORTH, /* Triangle */
+	[0x0e] = BTN_EAST, /* Circle */
+	[0x0f] = BTN_SOUTH, /* Cross */
+	[0x10] = BTN_WEST, /* Square */
+	[0x11] = BTN_MODE, /* PS */
+};
+
+static const unsigned int sixaxis_absmap[] = {
+	[0x30] = ABS_X,
+	[0x31] = ABS_Y,
+	[0x32] = ABS_RX, /* right stick X */
+	[0x35] = ABS_RY, /* right stick Y */
+};
+
+static const unsigned int sixaxis_keymap[] = {
+	[0x01] = BTN_SELECT, /* Select */
+	[0x02] = BTN_THUMBL, /* L3 */
+	[0x03] = BTN_THUMBR, /* R3 */
+	[0x04] = BTN_START, /* Start */
+	[0x05] = BTN_DPAD_UP, /* Up */
+	[0x06] = BTN_DPAD_RIGHT, /* Right */
+	[0x07] = BTN_DPAD_DOWN, /* Down */
+	[0x08] = BTN_DPAD_LEFT, /* Left */
+	[0x09] = BTN_TL2, /* L2 */
+	[0x0a] = BTN_TR2, /* R2 */
+	[0x0b] = BTN_TL, /* L1 */
+	[0x0c] = BTN_TR, /* R1 */
+	[0x0d] = BTN_NORTH, /* Triangle */
+	[0x0e] = BTN_EAST, /* Circle */
+	[0x0f] = BTN_SOUTH, /* Cross */
+	[0x10] = BTN_WEST, /* Square */
+	[0x11] = BTN_MODE, /* PS */
+};
+
 static const unsigned int ds4_absmap[] = {
 	[0x30] = ABS_X,
 	[0x31] = ABS_Y,
@@ -1002,6 +421,10 @@ static const unsigned int ds4_keymap[] = {
 	[0xd] = BTN_MODE, /* PS */
 };
 
+static const struct {int x; int y; } ds4_hat_mapping[] = {
+	{0, -1}, {1, -1}, {1, 0}, {1, 1}, {0, 1}, {-1, 1}, {-1, 0}, {-1, -1},
+	{0, 0}
+};
 
 static enum power_supply_property sony_battery_props[] = {
 	POWER_SUPPLY_PROP_PRESENT,
@@ -1048,6 +471,7 @@ struct motion_output_report_02 {
 };
 
 #define DS4_FEATURE_REPORT_0x02_SIZE 37
+#define DS4_FEATURE_REPORT_0x05_SIZE 41
 #define DS4_FEATURE_REPORT_0x81_SIZE 7
 #define DS4_INPUT_REPORT_0x11_SIZE 78
 #define DS4_OUTPUT_REPORT_0x05_SIZE 32
@@ -1059,23 +483,62 @@ struct motion_output_report_02 {
 /* Offsets relative to USB input report (0x1). Bluetooth (0x11) requires an
  * additional +2.
  */
+#define DS4_INPUT_REPORT_AXIS_OFFSET      1
 #define DS4_INPUT_REPORT_BUTTON_OFFSET    5
+#define DS4_INPUT_REPORT_TIMESTAMP_OFFSET 10
+#define DS4_INPUT_REPORT_GYRO_X_OFFSET   13
 #define DS4_INPUT_REPORT_BATTERY_OFFSET  30
 #define DS4_INPUT_REPORT_TOUCHPAD_OFFSET 33
 
+#define SENSOR_SUFFIX " Motion Sensors"
 #define DS4_TOUCHPAD_SUFFIX " Touchpad"
 
+/* Default to 4ms poll interval, which is same as USB (not adjustable). */
+#define DS4_BT_DEFAULT_POLL_INTERVAL_MS 4
+#define DS4_BT_MAX_POLL_INTERVAL_MS 62
+#define DS4_GYRO_RES_PER_DEG_S 1024
+#define DS4_ACC_RES_PER_G      8192
+
+#define SIXAXIS_INPUT_REPORT_ACC_X_OFFSET 41
+#define SIXAXIS_ACC_RES_PER_G 113
+
 static DEFINE_SPINLOCK(sony_dev_list_lock);
 static LIST_HEAD(sony_device_list);
 static DEFINE_IDA(sony_device_id_allocator);
 
+/* Used for calibration of DS4 accelerometer and gyro. */
+struct ds4_calibration_data {
+	int abs_code;
+	short bias;
+	/* Calibration requires scaling against a sensitivity value, which is a
+	 * float. Store sensitivity as a fraction to limit floating point
+	 * calculations until final calibration.
+	 */
+	int sens_numer;
+	int sens_denom;
+};
+
+enum ds4_dongle_state {
+	DONGLE_DISCONNECTED,
+	DONGLE_CALIBRATING,
+	DONGLE_CONNECTED,
+	DONGLE_DISABLED
+};
+
+enum sony_worker {
+	SONY_WORKER_STATE,
+	SONY_WORKER_HOTPLUG
+};
+
 struct sony_sc {
 	spinlock_t lock;
 	struct list_head list_node;
 	struct hid_device *hdev;
 	struct input_dev *touchpad;
+	struct input_dev *sensor_dev;
 	struct led_classdev *leds[MAX_LEDS];
 	unsigned long quirks;
+	struct work_struct hotplug_worker;
 	struct work_struct state_worker;
 	void (*send_output_report)(struct sony_sc *);
 	struct power_supply *battery;
@@ -1089,46 +552,87 @@ struct sony_sc {
 #endif
 
 	u8 mac_address[6];
-	u8 worker_initialized;
+	u8 hotplug_worker_initialized;
+	u8 state_worker_initialized;
 	u8 defer_initialization;
 	u8 cable_state;
 	u8 battery_charging;
 	u8 battery_capacity;
 	u8 led_state[MAX_LEDS];
-	u8 resume_led_state[MAX_LEDS];
 	u8 led_delay_on[MAX_LEDS];
 	u8 led_delay_off[MAX_LEDS];
 	u8 led_count;
-	bool ds4_dongle_connected;
+
+	bool timestamp_initialized;
+	u16 prev_timestamp;
+	unsigned int timestamp_us;
+
+	u8 ds4_bt_poll_interval;
+	enum ds4_dongle_state ds4_dongle_state;
+	/* DS4 calibration data */
+	struct ds4_calibration_data ds4_calib_data[6];
 };
 
 static void sony_set_leds(struct sony_sc *sc);
 
-static inline void sony_schedule_work(struct sony_sc *sc)
+static inline void sony_schedule_work(struct sony_sc *sc,
+				      enum sony_worker which)
 {
-	if (!sc->defer_initialization)
-		schedule_work(&sc->state_worker);
+	switch (which) {
+	case SONY_WORKER_STATE:
+		if (!sc->defer_initialization)
+			schedule_work(&sc->state_worker);
+		break;
+	case SONY_WORKER_HOTPLUG:
+		if (sc->hotplug_worker_initialized)
+			schedule_work(&sc->hotplug_worker);
+		break;
+	}
 }
 
-static u8 *sixaxis_fixup(struct hid_device *hdev, u8 *rdesc,
-			     unsigned int *rsize)
+static ssize_t ds4_show_poll_interval(struct device *dev,
+				struct device_attribute
+				*attr, char *buf)
 {
-	*rsize = sizeof(sixaxis_rdesc);
-	return sixaxis_rdesc;
+	struct hid_device *hdev = to_hid_device(dev);
+	struct sony_sc *sc = hid_get_drvdata(hdev);
+
+	return snprintf(buf, PAGE_SIZE, "%i\n", sc->ds4_bt_poll_interval);
 }
 
-static u8 *motion_fixup(struct hid_device *hdev, u8 *rdesc,
-			     unsigned int *rsize)
+static ssize_t ds4_store_poll_interval(struct device *dev,
+				struct device_attribute *attr,
+				const char *buf, size_t count)
 {
-	*rsize = sizeof(motion_rdesc);
-	return motion_rdesc;
+	struct hid_device *hdev = to_hid_device(dev);
+	struct sony_sc *sc = hid_get_drvdata(hdev);
+	unsigned long flags;
+	u8 interval;
+
+	if (kstrtou8(buf, 0, &interval))
+		return -EINVAL;
+
+	if (interval > DS4_BT_MAX_POLL_INTERVAL_MS)
+		return -EINVAL;
+
+	spin_lock_irqsave(&sc->lock, flags);
+	sc->ds4_bt_poll_interval = interval;
+	spin_unlock_irqrestore(&sc->lock, flags);
+
+	sony_schedule_work(sc, SONY_WORKER_STATE);
+
+	return count;
 }
 
-static u8 *navigation_fixup(struct hid_device *hdev, u8 *rdesc,
+static DEVICE_ATTR(bt_poll_interval, 0644, ds4_show_poll_interval,
+		ds4_store_poll_interval);
+
+
+static u8 *motion_fixup(struct hid_device *hdev, u8 *rdesc,
 			     unsigned int *rsize)
 {
-	*rsize = sizeof(navigation_rdesc);
-	return navigation_rdesc;
+	*rsize = sizeof(motion_rdesc);
+	return motion_rdesc;
 }
 
 static u8 *ps3remote_fixup(struct hid_device *hdev, u8 *rdesc,
@@ -1172,6 +676,102 @@ static int ps3remote_mapping(struct hid_device *hdev, struct hid_input *hi,
 	return 1;
 }
 
+static int navigation_mapping(struct hid_device *hdev, struct hid_input *hi,
+			  struct hid_field *field, struct hid_usage *usage,
+			  unsigned long **bit, int *max)
+{
+	if ((usage->hid & HID_USAGE_PAGE) == HID_UP_BUTTON) {
+		unsigned int key = usage->hid & HID_USAGE;
+
+		if (key >= ARRAY_SIZE(sixaxis_keymap))
+			return -1;
+
+		key = navigation_keymap[key];
+		if (!key)
+			return -1;
+
+		hid_map_usage_clear(hi, usage, bit, max, EV_KEY, key);
+		return 1;
+	} else if (usage->hid == HID_GD_POINTER) {
+		/* See comment in sixaxis_mapping, basically the L2 (and R2)
+		 * triggers are reported through GD Pointer.
+		 * In addition we ignore any analog button 'axes' and only
+		 * support digital buttons.
+		 */
+		switch (usage->usage_index) {
+		case 8: /* L2 */
+			usage->hid = HID_GD_Z;
+			break;
+		default:
+			return -1;
+		}
+
+		hid_map_usage_clear(hi, usage, bit, max, EV_ABS, usage->hid & 0xf);
+		return 1;
+	} else if ((usage->hid & HID_USAGE_PAGE) == HID_UP_GENDESK) {
+		unsigned int abs = usage->hid & HID_USAGE;
+
+		if (abs >= ARRAY_SIZE(navigation_absmap))
+			return -1;
+
+		abs = navigation_absmap[abs];
+
+		hid_map_usage_clear(hi, usage, bit, max, EV_ABS, abs);
+		return 1;
+	}
+
+	return -1;
+}
+
+
+static int sixaxis_mapping(struct hid_device *hdev, struct hid_input *hi,
+			  struct hid_field *field, struct hid_usage *usage,
+			  unsigned long **bit, int *max)
+{
+	if ((usage->hid & HID_USAGE_PAGE) == HID_UP_BUTTON) {
+		unsigned int key = usage->hid & HID_USAGE;
+
+		if (key >= ARRAY_SIZE(sixaxis_keymap))
+			return -1;
+
+		key = sixaxis_keymap[key];
+		hid_map_usage_clear(hi, usage, bit, max, EV_KEY, key);
+		return 1;
+	} else if (usage->hid == HID_GD_POINTER) {
+		/* The DS3 provides analog values for most buttons and even
+		 * for HAT axes through GD Pointer. L2 and R2 are reported
+		 * among these as well instead of as GD Z / RZ. Remap L2
+		 * and R2 and ignore other analog 'button axes' as there is
+		 * no good way for reporting them.
+		 */
+		switch (usage->usage_index) {
+		case 8: /* L2 */
+			usage->hid = HID_GD_Z;
+			break;
+		case 9: /* R2 */
+			usage->hid = HID_GD_RZ;
+			break;
+		default:
+			return -1;
+		}
+
+		hid_map_usage_clear(hi, usage, bit, max, EV_ABS, usage->hid & 0xf);
+		return 1;
+	} else if ((usage->hid & HID_USAGE_PAGE) == HID_UP_GENDESK) {
+		unsigned int abs = usage->hid & HID_USAGE;
+
+		if (abs >= ARRAY_SIZE(sixaxis_absmap))
+			return -1;
+
+		abs = sixaxis_absmap[abs];
+
+		hid_map_usage_clear(hi, usage, bit, max, EV_ABS, abs);
+		return 1;
+	}
+
+	return -1;
+}
+
 static int ds4_mapping(struct hid_device *hdev, struct hid_input *hi,
 		       struct hid_field *field, struct hid_usage *usage,
 		       unsigned long **bit, int *max)
@@ -1227,30 +827,9 @@ static u8 *sony_report_fixup(struct hid_device *hdev, u8 *rdesc,
 		rdesc[55] = 0x06;
 	}
 
-	/*
-	 * The default Dualshock 4 USB descriptor doesn't assign
-	 * the gyroscope values to corresponding axes so we need a
-	 * modified one.
-	 */
-	if (sc->quirks & DUALSHOCK4_CONTROLLER_USB) {
-		hid_info(hdev, "Using modified Dualshock 4 report descriptor with gyroscope axes\n");
-		rdesc = dualshock4_usb_rdesc;
-		*rsize = sizeof(dualshock4_usb_rdesc);
-	} else if (sc->quirks & DUALSHOCK4_CONTROLLER_BT) {
-		hid_info(hdev, "Using modified Dualshock 4 Bluetooth report descriptor\n");
-		rdesc = dualshock4_bt_rdesc;
-		*rsize = sizeof(dualshock4_bt_rdesc);
-	}
-
-	if (sc->quirks & SIXAXIS_CONTROLLER)
-		return sixaxis_fixup(hdev, rdesc, rsize);
-
 	if (sc->quirks & MOTION_CONTROLLER)
 		return motion_fixup(hdev, rdesc, rsize);
 
-	if (sc->quirks & NAVIGATION_CONTROLLER)
-		return navigation_fixup(hdev, rdesc, rsize);
-
 	if (sc->quirks & PS3REMOTE)
 		return ps3remote_fixup(hdev, rdesc, rsize);
 
@@ -1288,22 +867,132 @@ static void sixaxis_parse_report(struct sony_sc *sc, u8 *rd, int size)
 	sc->battery_capacity = battery_capacity;
 	sc->battery_charging = battery_charging;
 	spin_unlock_irqrestore(&sc->lock, flags);
+
+	if (sc->quirks & SIXAXIS_CONTROLLER) {
+		int val;
+
+		offset = SIXAXIS_INPUT_REPORT_ACC_X_OFFSET;
+		val = ((rd[offset+1] << 8) | rd[offset]) - 511;
+		input_report_abs(sc->sensor_dev, ABS_X, val);
+
+		/* Y and Z are swapped and inversed */
+		val = 511 - ((rd[offset+5] << 8) | rd[offset+4]);
+		input_report_abs(sc->sensor_dev, ABS_Y, val);
+
+		val = 511 - ((rd[offset+3] << 8) | rd[offset+2]);
+		input_report_abs(sc->sensor_dev, ABS_Z, val);
+
+		input_sync(sc->sensor_dev);
+	}
 }
 
 static void dualshock4_parse_report(struct sony_sc *sc, u8 *rd, int size)
 {
+	struct hid_input *hidinput = list_entry(sc->hdev->inputs.next,
+						struct hid_input, list);
+	struct input_dev *input_dev = hidinput->input;
 	unsigned long flags;
 	int n, m, offset, num_touch_data, max_touch_data;
 	u8 cable_state, battery_capacity, battery_charging;
+	u16 timestamp;
 
 	/* When using Bluetooth the header is 2 bytes longer, so skip these. */
-	int data_offset = (sc->quirks & DUALSHOCK4_CONTROLLER_USB) ? 0 : 2;
+	int data_offset = (sc->quirks & DUALSHOCK4_CONTROLLER_BT) ? 2 : 0;
 
 	/* Second bit of third button byte is for the touchpad button. */
 	offset = data_offset + DS4_INPUT_REPORT_BUTTON_OFFSET;
 	input_report_key(sc->touchpad, BTN_LEFT, rd[offset+2] & 0x2);
 
 	/*
+	 * The default behavior of the Dualshock 4 is to send reports using
+	 * report type 1 when running over Bluetooth. However, when feature
+	 * report 2 is requested during the controller initialization it starts
+	 * sending input reports in report 17. Since report 17 is undefined
+	 * in the default HID descriptor, the HID layer won't generate events.
+	 * While it is possible (and this was done before) to fixup the HID
+	 * descriptor to add this mapping, it was better to do this manually.
+	 * The reason is there were various pieces software both open and closed
+	 * source, relying on the descriptors to be the same across various
+	 * operating systems. If the descriptors wouldn't match some
+	 * applications e.g. games on Wine would not be able to function due
+	 * to different descriptors, which such applications are not parsing.
+	 */
+	if (rd[0] == 17) {
+		int value;
+
+		offset = data_offset + DS4_INPUT_REPORT_AXIS_OFFSET;
+		input_report_abs(input_dev, ABS_X, rd[offset]);
+		input_report_abs(input_dev, ABS_Y, rd[offset+1]);
+		input_report_abs(input_dev, ABS_RX, rd[offset+2]);
+		input_report_abs(input_dev, ABS_RY, rd[offset+3]);
+
+		value = rd[offset+4] & 0xf;
+		if (value > 7)
+			value = 8; /* Center 0, 0 */
+		input_report_abs(input_dev, ABS_HAT0X, ds4_hat_mapping[value].x);
+		input_report_abs(input_dev, ABS_HAT0Y, ds4_hat_mapping[value].y);
+
+		input_report_key(input_dev, BTN_WEST, rd[offset+4] & 0x10);
+		input_report_key(input_dev, BTN_SOUTH, rd[offset+4] & 0x20);
+		input_report_key(input_dev, BTN_EAST, rd[offset+4] & 0x40);
+		input_report_key(input_dev, BTN_NORTH, rd[offset+4] & 0x80);
+
+		input_report_key(input_dev, BTN_TL, rd[offset+5] & 0x1);
+		input_report_key(input_dev, BTN_TR, rd[offset+5] & 0x2);
+		input_report_key(input_dev, BTN_TL2, rd[offset+5] & 0x4);
+		input_report_key(input_dev, BTN_TR2, rd[offset+5] & 0x8);
+		input_report_key(input_dev, BTN_SELECT, rd[offset+5] & 0x10);
+		input_report_key(input_dev, BTN_START, rd[offset+5] & 0x20);
+		input_report_key(input_dev, BTN_THUMBL, rd[offset+5] & 0x40);
+		input_report_key(input_dev, BTN_THUMBR, rd[offset+5] & 0x80);
+
+		input_report_key(input_dev, BTN_MODE, rd[offset+6] & 0x1);
+
+		input_report_abs(input_dev, ABS_Z, rd[offset+7]);
+		input_report_abs(input_dev, ABS_RZ, rd[offset+8]);
+
+		input_sync(input_dev);
+	}
+
+	/* Convert timestamp (in 5.33us unit) to timestamp_us */
+	offset = data_offset + DS4_INPUT_REPORT_TIMESTAMP_OFFSET;
+	timestamp = get_unaligned_le16(&rd[offset]);
+	if (!sc->timestamp_initialized) {
+		sc->timestamp_us = ((unsigned int)timestamp * 16) / 3;
+		sc->timestamp_initialized = true;
+	} else {
+		u16 delta;
+
+		if (sc->prev_timestamp > timestamp)
+			delta = (U16_MAX - sc->prev_timestamp + timestamp + 1);
+		else
+			delta = timestamp - sc->prev_timestamp;
+		sc->timestamp_us += (delta * 16) / 3;
+	}
+	sc->prev_timestamp = timestamp;
+	input_event(sc->sensor_dev, EV_MSC, MSC_TIMESTAMP, sc->timestamp_us);
+
+	offset = data_offset + DS4_INPUT_REPORT_GYRO_X_OFFSET;
+	for (n = 0; n < 6; n++) {
+		/* Store data in int for more precision during mult_frac. */
+		int raw_data = (short)((rd[offset+1] << 8) | rd[offset]);
+		struct ds4_calibration_data *calib = &sc->ds4_calib_data[n];
+
+		/* High precision is needed during calibration, but the
+		 * calibrated values are within 32-bit.
+		 * Note: we swap numerator 'x' and 'numer' in mult_frac for
+		 *       precision reasons so we don't need 64-bit.
+		 */
+		int calib_data = mult_frac(calib->sens_numer,
+					   raw_data - calib->bias,
+					   calib->sens_denom);
+
+		input_report_abs(sc->sensor_dev, calib->abs_code, calib_data);
+		offset += 2;
+	}
+	input_sync(sc->sensor_dev);
+
+	/*
 	 * The lower 4 bits of byte 30 (or 32 for BT) contain the battery level
 	 * and the 5th bit contains the USB cable state.
 	 */
@@ -1341,7 +1030,7 @@ static void dualshock4_parse_report(struct sony_sc *sc, u8 *rd, int size)
 	 * Trackpad data starts 2 bytes later (e.g. 35 for USB).
 	 */
 	offset = data_offset + DS4_INPUT_REPORT_TOUCHPAD_OFFSET;
-	max_touch_data = (sc->quirks & DUALSHOCK4_CONTROLLER_USB) ? 3 : 4;
+	max_touch_data = (sc->quirks & DUALSHOCK4_CONTROLLER_BT) ? 4 : 3;
 	if (rd[offset] > 0 && rd[offset] <= max_touch_data)
 		num_touch_data = rd[offset];
 	else
@@ -1415,47 +1104,79 @@ static int sony_raw_event(struct hid_device *hdev, struct hid_report *report,
 	} else if ((sc->quirks & NAVIGATION_CONTROLLER) && rd[0] == 0x01 &&
 			size == 49) {
 		sixaxis_parse_report(sc, rd, size);
-	} else if (((sc->quirks & DUALSHOCK4_CONTROLLER_USB) && rd[0] == 0x01 &&
-			size == 64) || ((sc->quirks & DUALSHOCK4_CONTROLLER_BT)
-			&& rd[0] == 0x11 && size == 78)) {
-		if (sc->quirks & DUALSHOCK4_CONTROLLER_BT) {
-			/* CRC check */
-			u8 bthdr = 0xA1;
-			u32 crc;
-			u32 report_crc;
+	} else if ((sc->quirks & DUALSHOCK4_CONTROLLER_USB) && rd[0] == 0x01 &&
+			size == 64) {
+		dualshock4_parse_report(sc, rd, size);
+	} else if (((sc->quirks & DUALSHOCK4_CONTROLLER_BT) && rd[0] == 0x11 &&
+			size == 78)) {
+		/* CRC check */
+		u8 bthdr = 0xA1;
+		u32 crc;
+		u32 report_crc;
 
-			crc = crc32_le(0xFFFFFFFF, &bthdr, 1);
-			crc = ~crc32_le(crc, rd, DS4_INPUT_REPORT_0x11_SIZE-4);
-			report_crc = get_unaligned_le32(&rd[DS4_INPUT_REPORT_0x11_SIZE-4]);
-			if (crc != report_crc) {
-				hid_dbg(sc->hdev, "DualShock 4 input report's CRC check failed, received crc 0x%0x != 0x%0x\n",
-					report_crc, crc);
-				return -EILSEQ;
-			}
+		crc = crc32_le(0xFFFFFFFF, &bthdr, 1);
+		crc = ~crc32_le(crc, rd, DS4_INPUT_REPORT_0x11_SIZE-4);
+		report_crc = get_unaligned_le32(&rd[DS4_INPUT_REPORT_0x11_SIZE-4]);
+		if (crc != report_crc) {
+			hid_dbg(sc->hdev, "DualShock 4 input report's CRC check failed, received crc 0x%0x != 0x%0x\n",
+				report_crc, crc);
+			return -EILSEQ;
 		}
 
+		dualshock4_parse_report(sc, rd, size);
+	} else if ((sc->quirks & DUALSHOCK4_DONGLE) && rd[0] == 0x01 &&
+			size == 64) {
+		unsigned long flags;
+		enum ds4_dongle_state dongle_state;
+
 		/*
 		 * In the case of a DS4 USB dongle, bit[2] of byte 31 indicates
 		 * if a DS4 is actually connected (indicated by '0').
 		 * For non-dongle, this bit is always 0 (connected).
 		 */
-		if (sc->hdev->vendor == USB_VENDOR_ID_SONY &&
-		    sc->hdev->product == USB_DEVICE_ID_SONY_PS4_CONTROLLER_DONGLE) {
-			bool connected = (rd[31] & 0x04) ? false : true;
-
-			if (!sc->ds4_dongle_connected && connected) {
-				hid_info(sc->hdev, "DualShock 4 USB dongle: controller connected\n");
-				sony_set_leds(sc);
-				sc->ds4_dongle_connected = true;
-			} else if (sc->ds4_dongle_connected && !connected) {
-				hid_info(sc->hdev, "DualShock 4 USB dongle: controller disconnected\n");
-				sc->ds4_dongle_connected = false;
-				/* Return 0, so hidraw can get the report. */
-				return 0;
-			} else if (!sc->ds4_dongle_connected) {
-				/* Return 0, so hidraw can get the report. */
-				return 0;
-			}
+		bool connected = (rd[31] & 0x04) ? false : true;
+
+		spin_lock_irqsave(&sc->lock, flags);
+		dongle_state = sc->ds4_dongle_state;
+		spin_unlock_irqrestore(&sc->lock, flags);
+
+		/*
+		 * The dongle always sends input reports even when no
+		 * DS4 is attached. When a DS4 is connected, we need to
+		 * obtain calibration data before we can use it.
+		 * The code below tracks dongle state and kicks of
+		 * calibration when needed and only allows us to process
+		 * input if a DS4 is actually connected.
+		 */
+		if (dongle_state == DONGLE_DISCONNECTED && connected) {
+			hid_info(sc->hdev, "DualShock 4 USB dongle: controller connected\n");
+			sony_set_leds(sc);
+
+			spin_lock_irqsave(&sc->lock, flags);
+			sc->ds4_dongle_state = DONGLE_CALIBRATING;
+			spin_unlock_irqrestore(&sc->lock, flags);
+
+			sony_schedule_work(sc, SONY_WORKER_HOTPLUG);
+
+			/* Don't process the report since we don't have
+			 * calibration data, but let hidraw have it anyway.
+			 */
+			return 0;
+		} else if ((dongle_state == DONGLE_CONNECTED ||
+			    dongle_state == DONGLE_DISABLED) && !connected) {
+			hid_info(sc->hdev, "DualShock 4 USB dongle: controller disconnected\n");
+
+			spin_lock_irqsave(&sc->lock, flags);
+			sc->ds4_dongle_state = DONGLE_DISCONNECTED;
+			spin_unlock_irqrestore(&sc->lock, flags);
+
+			/* Return 0, so hidraw can get the report. */
+			return 0;
+		} else if (dongle_state == DONGLE_CALIBRATING ||
+			   dongle_state == DONGLE_DISABLED ||
+			   dongle_state == DONGLE_DISCONNECTED) {
+			/* Return 0, so hidraw can get the report. */
+			return 0;
 		}
 
 		dualshock4_parse_report(sc, rd, size);
@@ -1463,7 +1184,7 @@ static int sony_raw_event(struct hid_device *hdev, struct hid_report *report,
 
 	if (sc->defer_initialization) {
 		sc->defer_initialization = 0;
-		sony_schedule_work(sc);
+		sony_schedule_work(sc, SONY_WORKER_STATE);
 	}
 
 	return 0;
@@ -1501,10 +1222,16 @@ static int sony_mapping(struct hid_device *hdev, struct hid_input *hi,
 	if (sc->quirks & PS3REMOTE)
 		return ps3remote_mapping(hdev, hi, field, usage, bit, max);
 
+	if (sc->quirks & NAVIGATION_CONTROLLER)
+		return navigation_mapping(hdev, hi, field, usage, bit, max);
+
+	if (sc->quirks & SIXAXIS_CONTROLLER)
+		return sixaxis_mapping(hdev, hi, field, usage, bit, max);
 
 	if (sc->quirks & DUALSHOCK4_CONTROLLER)
 		return ds4_mapping(hdev, hi, field, usage, bit, max);
 
+
 	/* Let hid-core decide for the others */
 	return 0;
 }
@@ -1541,7 +1268,7 @@ static int sony_register_touchpad(struct sony_sc *sc, int touch_count,
 	snprintf(name, name_sz, "%s" DS4_TOUCHPAD_SUFFIX, sc->hdev->name);
 	sc->touchpad->name = name;
 
-	ret = input_mt_init_slots(sc->touchpad, touch_count, 0);
+	ret = input_mt_init_slots(sc->touchpad, touch_count, INPUT_MT_POINTER);
 	if (ret < 0)
 		goto err;
 
@@ -1581,6 +1308,103 @@ static void sony_unregister_touchpad(struct sony_sc *sc)
 	sc->touchpad = NULL;
 }
 
+static int sony_register_sensors(struct sony_sc *sc)
+{
+	size_t name_sz;
+	char *name;
+	int ret;
+	int range;
+
+	sc->sensor_dev = input_allocate_device();
+	if (!sc->sensor_dev)
+		return -ENOMEM;
+
+	input_set_drvdata(sc->sensor_dev, sc);
+	sc->sensor_dev->dev.parent = &sc->hdev->dev;
+	sc->sensor_dev->phys = sc->hdev->phys;
+	sc->sensor_dev->uniq = sc->hdev->uniq;
+	sc->sensor_dev->id.bustype = sc->hdev->bus;
+	sc->sensor_dev->id.vendor = sc->hdev->vendor;
+	sc->sensor_dev->id.product = sc->hdev->product;
+	sc->sensor_dev->id.version = sc->hdev->version;
+
+	/* Append a suffix to the controller name as there are various
+	 * DS4 compatible non-Sony devices with different names.
+	 */
+	name_sz = strlen(sc->hdev->name) + sizeof(SENSOR_SUFFIX);
+	name = kzalloc(name_sz, GFP_KERNEL);
+	if (!name) {
+		ret = -ENOMEM;
+		goto err;
+	}
+	snprintf(name, name_sz, "%s" SENSOR_SUFFIX, sc->hdev->name);
+	sc->sensor_dev->name = name;
+
+	if (sc->quirks & SIXAXIS_CONTROLLER) {
+		/* For the DS3 we only support the accelerometer, which works
+		 * quite well even without calibration. The device also has
+		 * a 1-axis gyro, but it is very difficult to manage from within
+		 * the driver even to get data, the sensor is inaccurate and
+		 * the behavior is very different between hardware revisions.
+		 */
+		input_set_abs_params(sc->sensor_dev, ABS_X, -512, 511, 4, 0);
+		input_set_abs_params(sc->sensor_dev, ABS_Y, -512, 511, 4, 0);
+		input_set_abs_params(sc->sensor_dev, ABS_Z, -512, 511, 4, 0);
+		input_abs_set_res(sc->sensor_dev, ABS_X, SIXAXIS_ACC_RES_PER_G);
+		input_abs_set_res(sc->sensor_dev, ABS_Y, SIXAXIS_ACC_RES_PER_G);
+		input_abs_set_res(sc->sensor_dev, ABS_Z, SIXAXIS_ACC_RES_PER_G);
+	} else if (sc->quirks & DUALSHOCK4_CONTROLLER) {
+		range = DS4_ACC_RES_PER_G*4;
+		input_set_abs_params(sc->sensor_dev, ABS_X, -range, range, 16, 0);
+		input_set_abs_params(sc->sensor_dev, ABS_Y, -range, range, 16, 0);
+		input_set_abs_params(sc->sensor_dev, ABS_Z, -range, range, 16, 0);
+		input_abs_set_res(sc->sensor_dev, ABS_X, DS4_ACC_RES_PER_G);
+		input_abs_set_res(sc->sensor_dev, ABS_Y, DS4_ACC_RES_PER_G);
+		input_abs_set_res(sc->sensor_dev, ABS_Z, DS4_ACC_RES_PER_G);
+
+		range = DS4_GYRO_RES_PER_DEG_S*2048;
+		input_set_abs_params(sc->sensor_dev, ABS_RX, -range, range, 16, 0);
+		input_set_abs_params(sc->sensor_dev, ABS_RY, -range, range, 16, 0);
+		input_set_abs_params(sc->sensor_dev, ABS_RZ, -range, range, 16, 0);
+		input_abs_set_res(sc->sensor_dev, ABS_RX, DS4_GYRO_RES_PER_DEG_S);
+		input_abs_set_res(sc->sensor_dev, ABS_RY, DS4_GYRO_RES_PER_DEG_S);
+		input_abs_set_res(sc->sensor_dev, ABS_RZ, DS4_GYRO_RES_PER_DEG_S);
+
+		__set_bit(EV_MSC, sc->sensor_dev->evbit);
+		__set_bit(MSC_TIMESTAMP, sc->sensor_dev->mscbit);
+	}
+
+	__set_bit(INPUT_PROP_ACCELEROMETER, sc->sensor_dev->propbit);
+
+	ret = input_register_device(sc->sensor_dev);
+	if (ret < 0)
+		goto err;
+
+	return 0;
+
+err:
+	kfree(sc->sensor_dev->name);
+	sc->sensor_dev->name = NULL;
+
+	input_free_device(sc->sensor_dev);
+	sc->sensor_dev = NULL;
+
+	return ret;
+}
+
+static void sony_unregister_sensors(struct sony_sc *sc)
+{
+	if (!sc->sensor_dev)
+		return;
+
+	kfree(sc->sensor_dev->name);
+	sc->sensor_dev->name = NULL;
+
+	input_unregister_device(sc->sensor_dev);
+	sc->sensor_dev = NULL;
+}
+
+
 /*
  * Sending HID_REQ_GET_REPORT changes the operation mode of the ps3 controller
  * to "operational".  Without this, the ps3 controller will not report any
@@ -1646,26 +1470,176 @@ static int sixaxis_set_operational_bt(struct hid_device *hdev)
 }
 
 /*
- * Requesting feature report 0x02 in Bluetooth mode changes the state of the
- * controller so that it sends full input reports of type 0x11.
+ * Request DS4 calibration data for the motion sensors.
+ * For Bluetooth this also affects the operating mode (see below).
  */
-static int dualshock4_set_operational_bt(struct hid_device *hdev)
+static int dualshock4_get_calibration_data(struct sony_sc *sc)
 {
 	u8 *buf;
 	int ret;
+	short gyro_pitch_bias, gyro_pitch_plus, gyro_pitch_minus;
+	short gyro_yaw_bias, gyro_yaw_plus, gyro_yaw_minus;
+	short gyro_roll_bias, gyro_roll_plus, gyro_roll_minus;
+	short gyro_speed_plus, gyro_speed_minus;
+	short acc_x_plus, acc_x_minus;
+	short acc_y_plus, acc_y_minus;
+	short acc_z_plus, acc_z_minus;
+	int speed_2x;
+	int range_2g;
+
+	/* For Bluetooth we use a different request, which supports CRC.
+	 * Note: in Bluetooth mode feature report 0x02 also changes the state
+	 * of the controller, so that it sends input reports of type 0x11.
+	 */
+	if (sc->quirks & (DUALSHOCK4_CONTROLLER_USB | DUALSHOCK4_DONGLE)) {
+		buf = kmalloc(DS4_FEATURE_REPORT_0x02_SIZE, GFP_KERNEL);
+		if (!buf)
+			return -ENOMEM;
 
-	buf = kmalloc(DS4_FEATURE_REPORT_0x02_SIZE, GFP_KERNEL);
-	if (!buf)
-		return -ENOMEM;
+		ret = hid_hw_raw_request(sc->hdev, 0x02, buf,
+					 DS4_FEATURE_REPORT_0x02_SIZE,
+					 HID_FEATURE_REPORT,
+					 HID_REQ_GET_REPORT);
+		if (ret < 0)
+			goto err_stop;
+	} else {
+		u8 bthdr = 0xA3;
+		u32 crc;
+		u32 report_crc;
+		int retries;
+
+		buf = kmalloc(DS4_FEATURE_REPORT_0x05_SIZE, GFP_KERNEL);
+		if (!buf)
+			return -ENOMEM;
 
-	ret = hid_hw_raw_request(hdev, 0x02, buf, DS4_FEATURE_REPORT_0x02_SIZE,
-				HID_FEATURE_REPORT, HID_REQ_GET_REPORT);
+		for (retries = 0; retries < 3; retries++) {
+			ret = hid_hw_raw_request(sc->hdev, 0x05, buf,
+						 DS4_FEATURE_REPORT_0x05_SIZE,
+						 HID_FEATURE_REPORT,
+						 HID_REQ_GET_REPORT);
+			if (ret < 0)
+				goto err_stop;
 
-	kfree(buf);
+			/* CRC check */
+			crc = crc32_le(0xFFFFFFFF, &bthdr, 1);
+			crc = ~crc32_le(crc, buf, DS4_FEATURE_REPORT_0x05_SIZE-4);
+			report_crc = get_unaligned_le32(&buf[DS4_FEATURE_REPORT_0x05_SIZE-4]);
+			if (crc != report_crc) {
+				hid_warn(sc->hdev, "DualShock 4 calibration report's CRC check failed, received crc 0x%0x != 0x%0x\n",
+					report_crc, crc);
+				if (retries < 2) {
+					hid_warn(sc->hdev, "Retrying DualShock 4 get calibration report request\n");
+					continue;
+				} else {
+					ret = -EILSEQ;
+					goto err_stop;
+				}
+			} else {
+				break;
+			}
+		}
+	}
 
+	gyro_pitch_bias  = get_unaligned_le16(&buf[1]);
+	gyro_yaw_bias    = get_unaligned_le16(&buf[3]);
+	gyro_roll_bias   = get_unaligned_le16(&buf[5]);
+	if (sc->quirks & DUALSHOCK4_CONTROLLER_USB) {
+		gyro_pitch_plus  = get_unaligned_le16(&buf[7]);
+		gyro_pitch_minus = get_unaligned_le16(&buf[9]);
+		gyro_yaw_plus    = get_unaligned_le16(&buf[11]);
+		gyro_yaw_minus   = get_unaligned_le16(&buf[13]);
+		gyro_roll_plus   = get_unaligned_le16(&buf[15]);
+		gyro_roll_minus  = get_unaligned_le16(&buf[17]);
+	} else {
+		/* BT + Dongle */
+		gyro_pitch_plus  = get_unaligned_le16(&buf[7]);
+		gyro_yaw_plus    = get_unaligned_le16(&buf[9]);
+		gyro_roll_plus   = get_unaligned_le16(&buf[11]);
+		gyro_pitch_minus = get_unaligned_le16(&buf[13]);
+		gyro_yaw_minus   = get_unaligned_le16(&buf[15]);
+		gyro_roll_minus  = get_unaligned_le16(&buf[17]);
+	}
+	gyro_speed_plus  = get_unaligned_le16(&buf[19]);
+	gyro_speed_minus = get_unaligned_le16(&buf[21]);
+	acc_x_plus       = get_unaligned_le16(&buf[23]);
+	acc_x_minus      = get_unaligned_le16(&buf[25]);
+	acc_y_plus       = get_unaligned_le16(&buf[27]);
+	acc_y_minus      = get_unaligned_le16(&buf[29]);
+	acc_z_plus       = get_unaligned_le16(&buf[31]);
+	acc_z_minus      = get_unaligned_le16(&buf[33]);
+
+	/* Set gyroscope calibration and normalization parameters.
+	 * Data values will be normalized to 1/DS4_GYRO_RES_PER_DEG_S degree/s.
+	 */
+	speed_2x = (gyro_speed_plus + gyro_speed_minus);
+	sc->ds4_calib_data[0].abs_code = ABS_RX;
+	sc->ds4_calib_data[0].bias = gyro_pitch_bias;
+	sc->ds4_calib_data[0].sens_numer = speed_2x*DS4_GYRO_RES_PER_DEG_S;
+	sc->ds4_calib_data[0].sens_denom = gyro_pitch_plus - gyro_pitch_minus;
+
+	sc->ds4_calib_data[1].abs_code = ABS_RY;
+	sc->ds4_calib_data[1].bias = gyro_yaw_bias;
+	sc->ds4_calib_data[1].sens_numer = speed_2x*DS4_GYRO_RES_PER_DEG_S;
+	sc->ds4_calib_data[1].sens_denom = gyro_yaw_plus - gyro_yaw_minus;
+
+	sc->ds4_calib_data[2].abs_code = ABS_RZ;
+	sc->ds4_calib_data[2].bias = gyro_roll_bias;
+	sc->ds4_calib_data[2].sens_numer = speed_2x*DS4_GYRO_RES_PER_DEG_S;
+	sc->ds4_calib_data[2].sens_denom = gyro_roll_plus - gyro_roll_minus;
+
+	/* Set accelerometer calibration and normalization parameters.
+	 * Data values will be normalized to 1/DS4_ACC_RES_PER_G G.
+	 */
+	range_2g = acc_x_plus - acc_x_minus;
+	sc->ds4_calib_data[3].abs_code = ABS_X;
+	sc->ds4_calib_data[3].bias = acc_x_plus - range_2g / 2;
+	sc->ds4_calib_data[3].sens_numer = 2*DS4_ACC_RES_PER_G;
+	sc->ds4_calib_data[3].sens_denom = range_2g;
+
+	range_2g = acc_y_plus - acc_y_minus;
+	sc->ds4_calib_data[4].abs_code = ABS_Y;
+	sc->ds4_calib_data[4].bias = acc_y_plus - range_2g / 2;
+	sc->ds4_calib_data[4].sens_numer = 2*DS4_ACC_RES_PER_G;
+	sc->ds4_calib_data[4].sens_denom = range_2g;
+
+	range_2g = acc_z_plus - acc_z_minus;
+	sc->ds4_calib_data[5].abs_code = ABS_Z;
+	sc->ds4_calib_data[5].bias = acc_z_plus - range_2g / 2;
+	sc->ds4_calib_data[5].sens_numer = 2*DS4_ACC_RES_PER_G;
+	sc->ds4_calib_data[5].sens_denom = range_2g;
+
+err_stop:
+	kfree(buf);
 	return ret;
 }
 
+static void dualshock4_calibration_work(struct work_struct *work)
+{
+	struct sony_sc *sc = container_of(work, struct sony_sc, hotplug_worker);
+	unsigned long flags;
+	enum ds4_dongle_state dongle_state;
+	int ret;
+
+	ret = dualshock4_get_calibration_data(sc);
+	if (ret < 0) {
+		/* This call is very unlikely to fail for the dongle. When it
+		 * fails we are probably in a very bad state, so mark the
+		 * dongle as disabled. We will re-enable the dongle if a new
+		 * DS4 hotplug is detect from sony_raw_event as any issues
+		 * are likely resolved then (the dongle is quite stupid).
+		 */
+		hid_err(sc->hdev, "DualShock 4 USB dongle: calibration failed, disabling device\n");
+		dongle_state = DONGLE_DISABLED;
+	} else {
+		hid_info(sc->hdev, "DualShock 4 USB dongle: calibration completed\n");
+		dongle_state = DONGLE_CONNECTED;
+	}
+
+	spin_lock_irqsave(&sc->lock, flags);
+	sc->ds4_dongle_state = dongle_state;
+	spin_unlock_irqrestore(&sc->lock, flags);
+}
+
 static void sixaxis_set_leds_from_id(struct sony_sc *sc)
 {
 	static const u8 sixaxis_leds[10][4] = {
@@ -1696,10 +1670,10 @@ static void dualshock4_set_leds_from_id(struct sony_sc *sc)
 {
 	/* The first 4 color/index entries match what the PS4 assigns */
 	static const u8 color_code[7][3] = {
-			/* Blue   */	{ 0x00, 0x00, 0x01 },
-			/* Red	  */	{ 0x01, 0x00, 0x00 },
-			/* Green  */	{ 0x00, 0x01, 0x00 },
-			/* Pink   */	{ 0x02, 0x00, 0x01 },
+			/* Blue   */	{ 0x00, 0x00, 0x40 },
+			/* Red	  */	{ 0x40, 0x00, 0x00 },
+			/* Green  */	{ 0x00, 0x40, 0x00 },
+			/* Pink   */	{ 0x20, 0x00, 0x20 },
 			/* Orange */	{ 0x02, 0x01, 0x00 },
 			/* Teal   */	{ 0x00, 0x01, 0x01 },
 			/* White  */	{ 0x01, 0x01, 0x01 }
@@ -1740,7 +1714,7 @@ static void buzz_set_leds(struct sony_sc *sc)
 static void sony_set_leds(struct sony_sc *sc)
 {
 	if (!(sc->quirks & BUZZ_CONTROLLER))
-		sony_schedule_work(sc);
+		sony_schedule_work(sc, SONY_WORKER_STATE);
 	else
 		buzz_set_leds(sc);
 }
@@ -1851,7 +1825,7 @@ static int sony_led_blink_set(struct led_classdev *led, unsigned long *delay_on,
 		new_off != drv_data->led_delay_off[n]) {
 		drv_data->led_delay_on[n] = new_on;
 		drv_data->led_delay_off[n] = new_off;
-		sony_schedule_work(drv_data);
+		sony_schedule_work(drv_data, SONY_WORKER_STATE);
 	}
 
 	return 0;
@@ -1964,6 +1938,7 @@ static int sony_leds_init(struct sony_sc *sc)
 		led->name = name;
 		led->brightness = sc->led_state[n];
 		led->max_brightness = max_brightness[n];
+		led->flags = LED_CORE_SUSPENDRESUME;
 		led->brightness_get = sony_led_get_brightness;
 		led->brightness_set = sony_led_set_brightness;
 
@@ -2052,26 +2027,24 @@ static void dualshock4_send_output_report(struct sony_sc *sc)
 	int offset;
 
 	/*
-	 * NOTE: The buf[1] field of the Bluetooth report controls
-	 * the Dualshock 4 reporting rate.
-	 *
-	 * Known values include:
-	 *
-	 * 0x80 - 1000hz (full speed)
-	 * 0xA0 - 31hz
-	 * 0xB0 - 20hz
-	 * 0xD0 - 66hz
+	 * NOTE: The lower 6 bits of buf[1] field of the Bluetooth report
+	 * control the interval at which Dualshock 4 reports data:
+	 * 0x00 - 1ms
+	 * 0x01 - 1ms
+	 * 0x02 - 2ms
+	 * 0x3E - 62ms
+	 * 0x3F - disabled
 	 */
-	if (sc->quirks & DUALSHOCK4_CONTROLLER_USB) {
+	if (sc->quirks & (DUALSHOCK4_CONTROLLER_USB | DUALSHOCK4_DONGLE)) {
 		memset(buf, 0, DS4_OUTPUT_REPORT_0x05_SIZE);
 		buf[0] = 0x05;
-		buf[1] = 0xFF;
+		buf[1] = 0x07; /* blink + LEDs + motor */
 		offset = 4;
 	} else {
 		memset(buf, 0, DS4_OUTPUT_REPORT_0x11_SIZE);
 		buf[0] = 0x11;
-		buf[1] = 0xC0; /* HID + CRC */
-		buf[3] = 0x0F;
+		buf[1] = 0xC0 /* HID + CRC */ | sc->ds4_bt_poll_interval;
+		buf[3] = 0x07; /* blink + LEDs + motor */
 		offset = 6;
 	}
 
@@ -2095,7 +2068,7 @@ static void dualshock4_send_output_report(struct sony_sc *sc)
 	buf[offset++] = sc->led_delay_on[3];
 	buf[offset++] = sc->led_delay_off[3];
 
-	if (sc->quirks & DUALSHOCK4_CONTROLLER_USB)
+	if (sc->quirks & (DUALSHOCK4_CONTROLLER_USB | DUALSHOCK4_DONGLE))
 		hid_hw_output_report(hdev, buf, DS4_OUTPUT_REPORT_0x05_SIZE);
 	else {
 		/* CRC generation */
@@ -2152,7 +2125,7 @@ static int sony_allocate_output_report(struct sony_sc *sc)
 	else if (sc->quirks & DUALSHOCK4_CONTROLLER_BT)
 		sc->output_report_dmabuf = kmalloc(DS4_OUTPUT_REPORT_0x11_SIZE,
 						GFP_KERNEL);
-	else if (sc->quirks & DUALSHOCK4_CONTROLLER_USB)
+	else if (sc->quirks & (DUALSHOCK4_CONTROLLER_USB | DUALSHOCK4_DONGLE))
 		sc->output_report_dmabuf = kmalloc(DS4_OUTPUT_REPORT_0x05_SIZE,
 						GFP_KERNEL);
 	else if (sc->quirks & MOTION_CONTROLLER)
@@ -2180,7 +2153,7 @@ static int sony_play_effect(struct input_dev *dev, void *data,
 	sc->left = effect->u.rumble.strong_magnitude / 256;
 	sc->right = effect->u.rumble.weak_magnitude / 256;
 
-	sony_schedule_work(sc);
+	sony_schedule_work(sc, SONY_WORKER_STATE);
 	return 0;
 }
 
@@ -2397,7 +2370,7 @@ static int sony_check_add(struct sony_sc *sc)
 			hid_warn(sc->hdev, "UNIQ does not contain a MAC address; duplicate check skipped\n");
 			return 0;
 		}
-	} else if (sc->quirks & DUALSHOCK4_CONTROLLER_USB) {
+	} else if (sc->quirks & (DUALSHOCK4_CONTROLLER_USB | DUALSHOCK4_DONGLE)) {
 		buf = kmalloc(DS4_FEATURE_REPORT_0x81_SIZE, GFP_KERNEL);
 		if (!buf)
 			return -ENOMEM;
@@ -2451,6 +2424,12 @@ static int sony_check_add(struct sony_sc *sc)
 		 */
 		for (n = 0; n < 6; n++)
 			sc->mac_address[5-n] = buf[4+n];
+
+		snprintf(sc->hdev->uniq, sizeof(sc->hdev->uniq),
+			"%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx",
+			sc->mac_address[5], sc->mac_address[4],
+			sc->mac_address[3], sc->mac_address[2],
+			sc->mac_address[1], sc->mac_address[0]);
 	} else {
 		return 0;
 	}
@@ -2501,18 +2480,21 @@ static inline void sony_init_output_report(struct sony_sc *sc,
 {
 	sc->send_output_report = send_output_report;
 
-	if (!sc->worker_initialized)
+	if (!sc->state_worker_initialized)
 		INIT_WORK(&sc->state_worker, sony_state_worker);
 
-	sc->worker_initialized = 1;
+	sc->state_worker_initialized = 1;
 }
 
 static inline void sony_cancel_work_sync(struct sony_sc *sc)
 {
-	if (sc->worker_initialized)
+	if (sc->hotplug_worker_initialized)
+		cancel_work_sync(&sc->hotplug_worker);
+	if (sc->state_worker_initialized)
 		cancel_work_sync(&sc->state_worker);
 }
 
+
 static int sony_input_configured(struct hid_device *hdev,
 					struct hid_input *hidinput)
 {
@@ -2526,14 +2508,17 @@ static int sony_input_configured(struct hid_device *hdev,
 		goto err_stop;
 	}
 
+	ret = append_dev_id = sony_check_add(sc);
+	if (ret < 0)
+		goto err_stop;
+
 	ret = sony_allocate_output_report(sc);
 	if (ret < 0) {
 		hid_err(hdev, "failed to allocate the output report buffer\n");
 		goto err_stop;
 	}
 
-	if ((sc->quirks & SIXAXIS_CONTROLLER_USB) ||
-			(sc->quirks & NAVIGATION_CONTROLLER_USB)) {
+	if (sc->quirks & NAVIGATION_CONTROLLER_USB) {
 		/*
 		 * The Sony Sixaxis does not handle HID Output Reports on the
 		 * Interrupt EP like it could, so we need to force HID Output
@@ -2553,24 +2538,79 @@ static int sony_input_configured(struct hid_device *hdev,
 		hdev->quirks |= HID_QUIRK_NO_OUTPUT_REPORTS_ON_INTR_EP;
 		hdev->quirks |= HID_QUIRK_SKIP_OUTPUT_REPORT_ID;
 		sc->defer_initialization = 1;
+
 		ret = sixaxis_set_operational_usb(hdev);
+		if (ret < 0) {
+			hid_err(hdev, "Failed to set controller into operational mode\n");
+			goto err_stop;
+		}
+
+		sony_init_output_report(sc, sixaxis_send_output_report);
+	} else if (sc->quirks & NAVIGATION_CONTROLLER_BT) {
+		/*
+		 * The Navigation controller wants output reports sent on the ctrl
+		 * endpoint when connected via Bluetooth.
+		 */
+		hdev->quirks |= HID_QUIRK_NO_OUTPUT_REPORTS_ON_INTR_EP;
+
+		ret = sixaxis_set_operational_bt(hdev);
+		if (ret < 0) {
+			hid_err(hdev, "Failed to set controller into operational mode\n");
+			goto err_stop;
+		}
+
 		sony_init_output_report(sc, sixaxis_send_output_report);
-	} else if ((sc->quirks & SIXAXIS_CONTROLLER_BT) ||
-			(sc->quirks & NAVIGATION_CONTROLLER_BT)) {
+	} else if (sc->quirks & SIXAXIS_CONTROLLER_USB) {
+		/*
+		 * The Sony Sixaxis does not handle HID Output Reports on the
+		 * Interrupt EP and the device only becomes active when the
+		 * PS button is pressed. See comment for Navigation controller
+		 * above for more details.
+		 */
+		hdev->quirks |= HID_QUIRK_NO_OUTPUT_REPORTS_ON_INTR_EP;
+		hdev->quirks |= HID_QUIRK_SKIP_OUTPUT_REPORT_ID;
+		sc->defer_initialization = 1;
+
+		ret = sixaxis_set_operational_usb(hdev);
+		if (ret < 0) {
+			hid_err(hdev, "Failed to set controller into operational mode\n");
+			goto err_stop;
+		}
+
+		ret = sony_register_sensors(sc);
+		if (ret) {
+			hid_err(sc->hdev,
+			"Unable to initialize motion sensors: %d\n", ret);
+			goto err_stop;
+		}
+
+		sony_init_output_report(sc, sixaxis_send_output_report);
+	} else if (sc->quirks & SIXAXIS_CONTROLLER_BT) {
 		/*
 		 * The Sixaxis wants output reports sent on the ctrl endpoint
 		 * when connected via Bluetooth.
 		 */
 		hdev->quirks |= HID_QUIRK_NO_OUTPUT_REPORTS_ON_INTR_EP;
+
 		ret = sixaxis_set_operational_bt(hdev);
+		if (ret < 0) {
+			hid_err(hdev, "Failed to set controller into operational mode\n");
+			goto err_stop;
+		}
+
+		ret = sony_register_sensors(sc);
+		if (ret) {
+			hid_err(sc->hdev,
+			"Unable to initialize motion sensors: %d\n", ret);
+			goto err_stop;
+		}
+
 		sony_init_output_report(sc, sixaxis_send_output_report);
 	} else if (sc->quirks & DUALSHOCK4_CONTROLLER) {
-		if (sc->quirks & DUALSHOCK4_CONTROLLER_BT) {
-			ret = dualshock4_set_operational_bt(hdev);
-			if (ret < 0) {
-				hid_err(hdev, "failed to set the Dualshock 4 operational mode\n");
-				goto err_stop;
-			}
+		ret = dualshock4_get_calibration_data(sc);
+		if (ret < 0) {
+			hid_err(hdev, "Failed to get calibration data from Dualshock 4\n");
+			goto err_stop;
 		}
 
 		/*
@@ -2585,6 +2625,28 @@ static int sony_input_configured(struct hid_device *hdev,
 			goto err_stop;
 		}
 
+		ret = sony_register_sensors(sc);
+		if (ret) {
+			hid_err(sc->hdev,
+			"Unable to initialize motion sensors: %d\n", ret);
+			goto err_stop;
+		}
+
+		if (sc->quirks & DUALSHOCK4_CONTROLLER_BT) {
+			sc->ds4_bt_poll_interval = DS4_BT_DEFAULT_POLL_INTERVAL_MS;
+			ret = device_create_file(&sc->hdev->dev, &dev_attr_bt_poll_interval);
+			if (ret)
+				hid_warn(sc->hdev,
+				 "can't create sysfs bt_poll_interval attribute err: %d\n",
+				 ret);
+		}
+
+		if (sc->quirks & DUALSHOCK4_DONGLE) {
+			INIT_WORK(&sc->hotplug_worker, dualshock4_calibration_work);
+			sc->hotplug_worker_initialized = 1;
+			sc->ds4_dongle_state = DONGLE_DISCONNECTED;
+		}
+
 		sony_init_output_report(sc, dualshock4_send_output_report);
 	} else if (sc->quirks & MOTION_CONTROLLER) {
 		sony_init_output_report(sc, motion_send_output_report);
@@ -2592,13 +2654,6 @@ static int sony_input_configured(struct hid_device *hdev,
 		ret = 0;
 	}
 
-	if (ret < 0)
-		goto err_stop;
-
-	ret = append_dev_id = sony_check_add(sc);
-	if (ret < 0)
-		goto err_stop;
-
 	if (sc->quirks & SONY_LED_SUPPORT) {
 		ret = sony_leds_init(sc);
 		if (ret < 0)
@@ -2628,12 +2683,20 @@ static int sony_input_configured(struct hid_device *hdev,
 err_close:
 	hid_hw_close(hdev);
 err_stop:
+	/* Piggy back on the default ds4_bt_ poll_interval to determine
+	 * if we need to remove the file as we don't know for sure if we
+	 * executed that logic.
+	 */
+	if (sc->ds4_bt_poll_interval)
+		device_remove_file(&sc->hdev->dev, &dev_attr_bt_poll_interval);
 	if (sc->quirks & SONY_LED_SUPPORT)
 		sony_leds_remove(sc);
 	if (sc->quirks & SONY_BATTERY_SUPPORT)
 		sony_battery_remove(sc);
 	if (sc->touchpad)
 		sony_unregister_touchpad(sc);
+	if (sc->sensor_dev)
+		sony_unregister_sensors(sc);
 	sony_cancel_work_sync(sc);
 	kfree(sc->output_report_dmabuf);
 	sony_remove_dev_list(sc);
@@ -2675,13 +2738,13 @@ static int sony_probe(struct hid_device *hdev, const struct hid_device_id *id)
 	else if (sc->quirks & SIXAXIS_CONTROLLER)
 		connect_mask |= HID_CONNECT_HIDDEV_FORCE;
 
-	/* Patch the hw version on DS4 compatible devices, so applications can
+	/* Patch the hw version on DS3/4 compatible devices, so applications can
 	 * distinguish between the default HID mappings and the mappings defined
 	 * by the Linux game controller spec. This is important for the SDL2
 	 * library, which has a game controller database, which uses device ids
 	 * in combination with version as a key.
 	 */
-	if (sc->quirks & DUALSHOCK4_CONTROLLER)
+	if (sc->quirks & (SIXAXIS_CONTROLLER | DUALSHOCK4_CONTROLLER))
 		hdev->version |= 0x8000;
 
 	ret = hid_hw_start(hdev, connect_mask);
@@ -2721,6 +2784,12 @@ static void sony_remove(struct hid_device *hdev)
 	if (sc->touchpad)
 		sony_unregister_touchpad(sc);
 
+	if (sc->sensor_dev)
+		sony_unregister_sensors(sc);
+
+	if (sc->quirks & DUALSHOCK4_CONTROLLER_BT)
+		device_remove_file(&sc->hdev->dev, &dev_attr_bt_poll_interval);
+
 	sony_cancel_work_sync(sc);
 
 	kfree(sc->output_report_dmabuf);
@@ -2736,47 +2805,32 @@ static void sony_remove(struct hid_device *hdev)
 
 static int sony_suspend(struct hid_device *hdev, pm_message_t message)
 {
-	/*
-	 * On suspend save the current LED state,
-	 * stop running force-feedback and blank the LEDS.
-	 */
-	if (SONY_LED_SUPPORT || SONY_FF_SUPPORT) {
-		struct sony_sc *sc = hid_get_drvdata(hdev);
-
 #ifdef CONFIG_SONY_FF
-		sc->left = sc->right = 0;
-#endif
 
-		memcpy(sc->resume_led_state, sc->led_state,
-			sizeof(sc->resume_led_state));
-		memset(sc->led_state, 0, sizeof(sc->led_state));
+	/* On suspend stop any running force-feedback events */
+	if (SONY_FF_SUPPORT) {
+		struct sony_sc *sc = hid_get_drvdata(hdev);
 
+		sc->left = sc->right = 0;
 		sony_send_output_report(sc);
 	}
 
+#endif
 	return 0;
 }
 
 static int sony_resume(struct hid_device *hdev)
 {
-	/* Restore the state of controller LEDs on resume */
-	if (SONY_LED_SUPPORT) {
-		struct sony_sc *sc = hid_get_drvdata(hdev);
-
-		memcpy(sc->led_state, sc->resume_led_state,
-			sizeof(sc->led_state));
-
-		/*
-		 * The Sixaxis and navigation controllers on USB need to be
-		 * reinitialized on resume or they won't behave properly.
-		 */
-		if ((sc->quirks & SIXAXIS_CONTROLLER_USB) ||
-			(sc->quirks & NAVIGATION_CONTROLLER_USB)) {
-			sixaxis_set_operational_usb(sc->hdev);
-			sc->defer_initialization = 1;
-		}
+	struct sony_sc *sc = hid_get_drvdata(hdev);
 
-		sony_set_leds(sc);
+	/*
+	 * The Sixaxis and navigation controllers on USB need to be
+	 * reinitialized on resume or they won't behave properly.
+	 */
+	if ((sc->quirks & SIXAXIS_CONTROLLER_USB) ||
+		(sc->quirks & NAVIGATION_CONTROLLER_USB)) {
+		sixaxis_set_operational_usb(sc->hdev);
+		sc->defer_initialization = 1;
 	}
 
 	return 0;
@@ -2828,7 +2882,7 @@ static const struct hid_device_id sony_devices[] = {
 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS4_CONTROLLER_2),
 		.driver_data = DUALSHOCK4_CONTROLLER_BT },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS4_CONTROLLER_DONGLE),
-		.driver_data = DUALSHOCK4_CONTROLLER_USB },
+		.driver_data = DUALSHOCK4_DONGLE },
 	/* Nyko Core Controller for PS3 */
 	{ HID_USB_DEVICE(USB_VENDOR_ID_SINO_LITE, USB_DEVICE_ID_SINO_LITE_CONTROLLER),
 		.driver_data = SIXAXIS_CONTROLLER_USB | SINO_LITE_CONTROLLER },
diff --git a/drivers/hid/i2c-hid/i2c-hid.c b/drivers/hid/i2c-hid/i2c-hid.c
index ea3c3546cef7..8daa8ce64ebb 100644
--- a/drivers/hid/i2c-hid/i2c-hid.c
+++ b/drivers/hid/i2c-hid/i2c-hid.c
@@ -508,66 +508,6 @@ static int i2c_hid_get_report_length(struct hid_report *report)
 		report->device->report_enum[report->type].numbered + 2;
 }
 
-static void i2c_hid_init_report(struct hid_report *report, u8 *buffer,
-	size_t bufsize)
-{
-	struct hid_device *hid = report->device;
-	struct i2c_client *client = hid->driver_data;
-	struct i2c_hid *ihid = i2c_get_clientdata(client);
-	unsigned int size, ret_size;
-
-	size = i2c_hid_get_report_length(report);
-	if (i2c_hid_get_report(client,
-			report->type == HID_FEATURE_REPORT ? 0x03 : 0x01,
-			report->id, buffer, size))
-		return;
-
-	i2c_hid_dbg(ihid, "report (len=%d): %*ph\n", size, size, buffer);
-
-	ret_size = buffer[0] | (buffer[1] << 8);
-
-	if (ret_size != size) {
-		dev_err(&client->dev, "error in %s size:%d / ret_size:%d\n",
-			__func__, size, ret_size);
-		return;
-	}
-
-	/* hid->driver_lock is held as we are in probe function,
-	 * we just need to setup the input fields, so using
-	 * hid_report_raw_event is safe. */
-	hid_report_raw_event(hid, report->type, buffer + 2, size - 2, 1);
-}
-
-/*
- * Initialize all reports
- */
-static void i2c_hid_init_reports(struct hid_device *hid)
-{
-	struct hid_report *report;
-	struct i2c_client *client = hid->driver_data;
-	struct i2c_hid *ihid = i2c_get_clientdata(client);
-	u8 *inbuf = kzalloc(ihid->bufsize, GFP_KERNEL);
-
-	if (!inbuf) {
-		dev_err(&client->dev, "can not retrieve initial reports\n");
-		return;
-	}
-
-	/*
-	 * The device must be powered on while we fetch initial reports
-	 * from it.
-	 */
-	pm_runtime_get_sync(&client->dev);
-
-	list_for_each_entry(report,
-		&hid->report_enum[HID_FEATURE_REPORT].report_list, list)
-		i2c_hid_init_report(report, inbuf, ihid->bufsize);
-
-	pm_runtime_put(&client->dev);
-
-	kfree(inbuf);
-}
-
 /*
  * Traverse the supplied list of reports and find the longest
  */
@@ -789,9 +729,6 @@ static int i2c_hid_start(struct hid_device *hid)
 			return ret;
 	}
 
-	if (!(hid->quirks & HID_QUIRK_NO_INIT_REPORTS))
-		i2c_hid_init_reports(hid);
-
 	return 0;
 }
 
@@ -994,6 +931,11 @@ static int i2c_hid_of_probe(struct i2c_client *client,
 	}
 	pdata->hid_descriptor_address = val;
 
+	ret = of_property_read_u32(dev->of_node, "post-power-on-delay-ms",
+				   &val);
+	if (!ret)
+		pdata->post_power_delay_ms = val;
+
 	return 0;
 }
 
@@ -1053,6 +995,24 @@ static int i2c_hid_probe(struct i2c_client *client,
 		ihid->pdata = *platform_data;
 	}
 
+	ihid->pdata.supply = devm_regulator_get(&client->dev, "vdd");
+	if (IS_ERR(ihid->pdata.supply)) {
+		ret = PTR_ERR(ihid->pdata.supply);
+		if (ret != -EPROBE_DEFER)
+			dev_err(&client->dev, "Failed to get regulator: %d\n",
+				ret);
+		goto err;
+	}
+
+	ret = regulator_enable(ihid->pdata.supply);
+	if (ret < 0) {
+		dev_err(&client->dev, "Failed to enable regulator: %d\n",
+			ret);
+		goto err;
+	}
+	if (ihid->pdata.post_power_delay_ms)
+		msleep(ihid->pdata.post_power_delay_ms);
+
 	i2c_set_clientdata(client, ihid);
 
 	ihid->client = client;
@@ -1068,7 +1028,7 @@ static int i2c_hid_probe(struct i2c_client *client,
 	 * real computation later. */
 	ret = i2c_hid_alloc_buffers(ihid, HID_MIN_BUFFER_SIZE);
 	if (ret < 0)
-		goto err;
+		goto err_regulator;
 
 	pm_runtime_get_noresume(&client->dev);
 	pm_runtime_set_active(&client->dev);
@@ -1125,6 +1085,9 @@ err_pm:
 	pm_runtime_put_noidle(&client->dev);
 	pm_runtime_disable(&client->dev);
 
+err_regulator:
+	regulator_disable(ihid->pdata.supply);
+
 err:
 	i2c_hid_free_buffers(ihid);
 	kfree(ihid);
@@ -1149,6 +1112,8 @@ static int i2c_hid_remove(struct i2c_client *client)
 	if (ihid->bufsize)
 		i2c_hid_free_buffers(ihid);
 
+	regulator_disable(ihid->pdata.supply);
+
 	kfree(ihid);
 
 	return 0;
@@ -1199,6 +1164,10 @@ static int i2c_hid_suspend(struct device *dev)
 		else
 			hid_warn(hid, "Failed to enable irq wake: %d\n",
 				wake_status);
+	} else {
+		ret = regulator_disable(ihid->pdata.supply);
+		if (ret < 0)
+			hid_warn(hid, "Failed to disable supply: %d\n", ret);
 	}
 
 	return 0;
@@ -1212,7 +1181,13 @@ static int i2c_hid_resume(struct device *dev)
 	struct hid_device *hid = ihid->hid;
 	int wake_status;
 
-	if (device_may_wakeup(&client->dev) && ihid->irq_wake_enabled) {
+	if (!device_may_wakeup(&client->dev)) {
+		ret = regulator_enable(ihid->pdata.supply);
+		if (ret < 0)
+			hid_warn(hid, "Failed to enable supply: %d\n", ret);
+		if (ihid->pdata.post_power_delay_ms)
+			msleep(ihid->pdata.post_power_delay_ms);
+	} else if (ihid->irq_wake_enabled) {
 		wake_status = disable_irq_wake(client->irq);
 		if (!wake_status)
 			ihid->irq_wake_enabled = false;
diff --git a/drivers/hid/usbhid/hid-core.c b/drivers/hid/usbhid/hid-core.c
index 961bc6fdd2d9..83772fa7d92a 100644
--- a/drivers/hid/usbhid/hid-core.c
+++ b/drivers/hid/usbhid/hid-core.c
@@ -52,6 +52,10 @@ static unsigned int hid_mousepoll_interval;
 module_param_named(mousepoll, hid_mousepoll_interval, uint, 0644);
 MODULE_PARM_DESC(mousepoll, "Polling interval of mice");
 
+static unsigned int hid_jspoll_interval;
+module_param_named(jspoll, hid_jspoll_interval, uint, 0644);
+MODULE_PARM_DESC(jspoll, "Polling interval of joysticks");
+
 static unsigned int ignoreled;
 module_param_named(ignoreled, ignoreled, uint, 0644);
 MODULE_PARM_DESC(ignoreled, "Autosuspend with active leds");
@@ -753,11 +757,9 @@ void usbhid_init_reports(struct hid_device *hid)
 	struct hid_report_enum *report_enum;
 	int err, ret;
 
-	if (!(hid->quirks & HID_QUIRK_NO_INIT_INPUT_REPORTS)) {
-		report_enum = &hid->report_enum[HID_INPUT_REPORT];
-		list_for_each_entry(report, &report_enum->report_list, list)
-			usbhid_submit_report(hid, report, USB_DIR_IN);
-	}
+	report_enum = &hid->report_enum[HID_INPUT_REPORT];
+	list_for_each_entry(report, &report_enum->report_list, list)
+		usbhid_submit_report(hid, report, USB_DIR_IN);
 
 	report_enum = &hid->report_enum[HID_FEATURE_REPORT];
 	list_for_each_entry(report, &report_enum->report_list, list)
@@ -1004,10 +1006,9 @@ static int usbhid_parse(struct hid_device *hid)
 		return -EINVAL;
 	}
 
-	if (!(rdesc = kmalloc(rsize, GFP_KERNEL))) {
-		dbg_hid("couldn't allocate rdesc memory\n");
+	rdesc = kmalloc(rsize, GFP_KERNEL);
+	if (!rdesc)
 		return -ENOMEM;
-	}
 
 	hid_set_idle(dev, interface->desc.bInterfaceNumber, 0, 0);
 
@@ -1077,13 +1078,21 @@ static int usbhid_start(struct hid_device *hid)
 		if (hid->quirks & HID_QUIRK_FULLSPEED_INTERVAL &&
 		    dev->speed == USB_SPEED_HIGH) {
 			interval = fls(endpoint->bInterval*8);
-			printk(KERN_INFO "%s: Fixing fullspeed to highspeed interval: %d -> %d\n",
-			       hid->name, endpoint->bInterval, interval);
+			pr_info("%s: Fixing fullspeed to highspeed interval: %d -> %d\n",
+				hid->name, endpoint->bInterval, interval);
 		}
 
-		/* Change the polling interval of mice. */
-		if (hid->collection->usage == HID_GD_MOUSE && hid_mousepoll_interval > 0)
-			interval = hid_mousepoll_interval;
+		/* Change the polling interval of mice and joysticks. */
+		switch (hid->collection->usage) {
+		case HID_GD_MOUSE:
+			if (hid_mousepoll_interval > 0)
+				interval = hid_mousepoll_interval;
+			break;
+		case HID_GD_JOYSTICK:
+			if (hid_jspoll_interval > 0)
+				interval = hid_jspoll_interval;
+			break;
+		}
 
 		ret = -ENOMEM;
 		if (usb_endpoint_dir_in(endpoint)) {
@@ -1120,9 +1129,6 @@ static int usbhid_start(struct hid_device *hid)
 	usbhid->urbctrl->transfer_dma = usbhid->ctrlbuf_dma;
 	usbhid->urbctrl->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
 
-	if (!(hid->quirks & HID_QUIRK_NO_INIT_REPORTS))
-		usbhid_init_reports(hid);
-
 	set_bit(HID_STARTED, &usbhid->iofl);
 
 	if (hid->quirks & HID_QUIRK_ALWAYS_POLL) {
@@ -1456,10 +1462,9 @@ static int hid_post_reset(struct usb_interface *intf)
 	 * the size of the HID report descriptor has not changed.
 	 */
 	rdesc = kmalloc(hid->dev_rsize, GFP_KERNEL);
-	if (!rdesc) {
-		dbg_hid("couldn't allocate rdesc memory (post_reset)\n");
+	if (!rdesc)
 		return -ENOMEM;
-	}
+
 	status = hid_get_class_descriptor(dev,
 				interface->desc.bInterfaceNumber,
 				HID_DT_REPORT, rdesc, hid->dev_rsize);
@@ -1637,7 +1642,7 @@ static int __init hid_init(void)
 	retval = usb_register(&hid_driver);
 	if (retval)
 		goto usb_register_fail;
-	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_DESC "\n");
+	pr_info(KBUILD_MODNAME ": " DRIVER_DESC "\n");
 
 	return 0;
 usb_register_fail:
diff --git a/drivers/hid/usbhid/hid-quirks.c b/drivers/hid/usbhid/hid-quirks.c
index a69a3c88ab29..6316498b7812 100644
--- a/drivers/hid/usbhid/hid-quirks.c
+++ b/drivers/hid/usbhid/hid-quirks.c
@@ -65,6 +65,7 @@ static const struct hid_blacklist {
 	{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_4PORTKVMC, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_CS682, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_CS692, HID_QUIRK_NOGET },
+	{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_CS1758, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_FIGHTERSTICK, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_COMBATSTICK, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_FLIGHT_SIM_ECLIPSE_YOKE, HID_QUIRK_NOGET },
@@ -161,10 +162,11 @@ static const struct hid_blacklist {
 	{ USB_VENDOR_ID_SYNAPTICS, USB_DEVICE_ID_SYNAPTICS_HD, HID_QUIRK_NO_INIT_REPORTS },
 	{ USB_VENDOR_ID_SYNAPTICS, USB_DEVICE_ID_SYNAPTICS_QUAD_HD, HID_QUIRK_NO_INIT_REPORTS },
 	{ USB_VENDOR_ID_SYNAPTICS, USB_DEVICE_ID_SYNAPTICS_TP_V103, HID_QUIRK_NO_INIT_REPORTS },
-	{ USB_VENDOR_ID_HOLTEK_ALT, USB_DEVICE_ID_HOLTEK_ALT_KEYBOARD_A096, HID_QUIRK_NO_INIT_INPUT_REPORTS },
+	{ USB_VENDOR_ID_HOLTEK_ALT, USB_DEVICE_ID_HOLTEK_ALT_KEYBOARD_A096, HID_QUIRK_NO_INIT_REPORTS },
 	{ USB_VENDOR_ID_MULTIPLE_1781, USB_DEVICE_ID_RAPHNET_4NES4SNES_OLD, HID_QUIRK_MULTI_INPUT },
 	{ USB_VENDOR_ID_DRACAL_RAPHNET, USB_DEVICE_ID_RAPHNET_2NES2SNES, HID_QUIRK_MULTI_INPUT },
 	{ USB_VENDOR_ID_DRACAL_RAPHNET, USB_DEVICE_ID_RAPHNET_4NES4SNES, HID_QUIRK_MULTI_INPUT },
+	{ USB_VENDOR_ID_INNOMEDIA, USB_DEVICE_ID_INNEX_GENESIS_ATARI, HID_QUIRK_MULTI_INPUT },
 
 	{ 0, 0 }
 };
@@ -240,10 +242,8 @@ static int usbhid_modify_dquirk(const u16 idVendor, const u16 idProduct,
 	}
 
 	q_new = kmalloc(sizeof(struct quirks_list_struct), GFP_KERNEL);
-	if (!q_new) {
-		dbg_hid("Could not allocate quirks_list_struct\n");
+	if (!q_new)
 		return -ENOMEM;
-	}
 
 	q_new->hid_bl_item.idVendor = idVendor;
 	q_new->hid_bl_item.idProduct = idProduct;
@@ -309,10 +309,9 @@ int usbhid_quirks_init(char **quirks_param)
 				&idVendor, &idProduct, &quirks);
 
 		if (m != 3 ||
-				usbhid_modify_dquirk(idVendor, idProduct, quirks) != 0) {
-			printk(KERN_WARNING
-					"Could not parse HID quirk module param %s\n",
-					quirks_param[n]);
+		    usbhid_modify_dquirk(idVendor, idProduct, quirks) != 0) {
+			pr_warn("Could not parse HID quirk module param %s\n",
+				quirks_param[n]);
 		}
 	}
 
diff --git a/drivers/hid/usbhid/hiddev.c b/drivers/hid/usbhid/hiddev.c
index 774bd701dae0..0e06368d1fbb 100644
--- a/drivers/hid/usbhid/hiddev.c
+++ b/drivers/hid/usbhid/hiddev.c
@@ -47,16 +47,6 @@
 #endif
 #define HIDDEV_BUFFER_SIZE	2048
 
-struct hiddev {
-	int exist;
-	int open;
-	struct mutex existancelock;
-	wait_queue_head_t wait;
-	struct hid_device *hid;
-	struct list_head list;
-	spinlock_t list_lock;
-};
-
 struct hiddev_list {
 	struct hiddev_usage_ref buffer[HIDDEV_BUFFER_SIZE];
 	int head;
@@ -690,6 +680,7 @@ static long hiddev_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 
 	case HIDIOCINITREPORT:
 		usbhid_init_reports(hid);
+		hiddev->initialized = true;
 		r = 0;
 		break;
 
@@ -791,6 +782,10 @@ static long hiddev_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 	case HIDIOCGUSAGES:
 	case HIDIOCSUSAGES:
 	case HIDIOCGCOLLECTIONINDEX:
+		if (!hiddev->initialized) {
+			usbhid_init_reports(hid);
+			hiddev->initialized = true;
+		}
 		r = hiddev_ioctl_usage(hiddev, cmd, user_arg);
 		break;
 
@@ -911,6 +906,15 @@ int hiddev_connect(struct hid_device *hid, unsigned int force)
 		kfree(hiddev);
 		return -1;
 	}
+
+	/*
+	 * If HID_QUIRK_NO_INIT_REPORTS is set, make sure we don't initialize
+	 * the reports.
+	 */
+	hiddev->initialized = hid->quirks & HID_QUIRK_NO_INIT_REPORTS;
+
+	hiddev->minor = usbhid->intf->minor;
+
 	return 0;
 }
 
diff --git a/drivers/hid/wacom.h b/drivers/hid/wacom.h
index 38ee2125412f..c7b9ab1907d8 100644
--- a/drivers/hid/wacom.h
+++ b/drivers/hid/wacom.h
@@ -110,6 +110,7 @@ enum wacom_worker {
 	WACOM_WORKER_WIRELESS,
 	WACOM_WORKER_BATTERY,
 	WACOM_WORKER_REMOTE,
+	WACOM_WORKER_MODE_CHANGE,
 };
 
 struct wacom;
@@ -167,6 +168,7 @@ struct wacom {
 	struct work_struct remote_work;
 	struct delayed_work init_work;
 	struct wacom_remote *remote;
+	struct work_struct mode_change_work;
 	bool generic_has_leds;
 	struct wacom_leds {
 		struct wacom_group_leds *groups;
@@ -196,6 +198,9 @@ static inline void wacom_schedule_work(struct wacom_wac *wacom_wac,
 	case WACOM_WORKER_REMOTE:
 		schedule_work(&wacom->remote_work);
 		break;
+	case WACOM_WORKER_MODE_CHANGE:
+		schedule_work(&wacom->mode_change_work);
+		break;
 	}
 }
 
diff --git a/drivers/hid/wacom_sys.c b/drivers/hid/wacom_sys.c
index e2666ef84dc1..0022c0dac88a 100644
--- a/drivers/hid/wacom_sys.c
+++ b/drivers/hid/wacom_sys.c
@@ -325,6 +325,13 @@ static void wacom_post_parse_hid(struct hid_device *hdev,
 
 	if (features->type == HID_GENERIC) {
 		/* Any last-minute generic device setup */
+		if (wacom_wac->has_mode_change) {
+			if (wacom_wac->is_direct_mode)
+				features->device_type |= WACOM_DEVICETYPE_DIRECT;
+			else
+				features->device_type &= ~WACOM_DEVICETYPE_DIRECT;
+		}
+
 		if (features->touch_max > 1) {
 			if (features->device_type & WACOM_DEVICETYPE_DIRECT)
 				input_mt_init_slots(wacom_wac->touch_input,
@@ -2093,8 +2100,10 @@ static void wacom_set_shared_values(struct wacom_wac *wacom_wac)
 		wacom_wac->shared->touch_input = wacom_wac->touch_input;
 	}
 
-	if (wacom_wac->has_mute_touch_switch)
+	if (wacom_wac->has_mute_touch_switch) {
 		wacom_wac->shared->has_mute_touch_switch = true;
+		wacom_wac->shared->is_touch_on = true;
+	}
 
 	if (wacom_wac->shared->has_mute_touch_switch &&
 	    wacom_wac->shared->touch_input) {
@@ -2490,6 +2499,46 @@ static void wacom_remote_work(struct work_struct *work)
 	}
 }
 
+static void wacom_mode_change_work(struct work_struct *work)
+{
+	struct wacom *wacom = container_of(work, struct wacom, mode_change_work);
+	struct wacom_shared *shared = wacom->wacom_wac.shared;
+	struct wacom *wacom1 = NULL;
+	struct wacom *wacom2 = NULL;
+	bool is_direct = wacom->wacom_wac.is_direct_mode;
+	int error = 0;
+
+	if (shared->pen) {
+		wacom1 = hid_get_drvdata(shared->pen);
+		wacom_release_resources(wacom1);
+		hid_hw_stop(wacom1->hdev);
+		wacom1->wacom_wac.has_mode_change = true;
+		wacom1->wacom_wac.is_direct_mode = is_direct;
+	}
+
+	if (shared->touch) {
+		wacom2 = hid_get_drvdata(shared->touch);
+		wacom_release_resources(wacom2);
+		hid_hw_stop(wacom2->hdev);
+		wacom2->wacom_wac.has_mode_change = true;
+		wacom2->wacom_wac.is_direct_mode = is_direct;
+	}
+
+	if (wacom1) {
+		error = wacom_parse_and_register(wacom1, false);
+		if (error)
+			return;
+	}
+
+	if (wacom2) {
+		error = wacom_parse_and_register(wacom2, false);
+		if (error)
+			return;
+	}
+
+	return;
+}
+
 static int wacom_probe(struct hid_device *hdev,
 		const struct hid_device_id *id)
 {
@@ -2534,6 +2583,7 @@ static int wacom_probe(struct hid_device *hdev,
 	INIT_WORK(&wacom->wireless_work, wacom_wireless_work);
 	INIT_WORK(&wacom->battery_work, wacom_battery_work);
 	INIT_WORK(&wacom->remote_work, wacom_remote_work);
+	INIT_WORK(&wacom->mode_change_work, wacom_mode_change_work);
 
 	/* ask for the report descriptor to be loaded by HID */
 	error = hid_parse(hdev);
@@ -2576,6 +2626,7 @@ static void wacom_remove(struct hid_device *hdev)
 	cancel_work_sync(&wacom->wireless_work);
 	cancel_work_sync(&wacom->battery_work);
 	cancel_work_sync(&wacom->remote_work);
+	cancel_work_sync(&wacom->mode_change_work);
 	if (hdev->bus == BUS_BLUETOOTH)
 		device_remove_file(&hdev->dev, &dev_attr_speed);
 
diff --git a/drivers/hid/wacom_wac.c b/drivers/hid/wacom_wac.c
index c68ac65db7ff..4b225fb19a16 100644
--- a/drivers/hid/wacom_wac.c
+++ b/drivers/hid/wacom_wac.c
@@ -773,131 +773,6 @@ static int wacom_intuos_inout(struct wacom_wac *wacom)
 	return 0;
 }
 
-static int wacom_remote_irq(struct wacom_wac *wacom_wac, size_t len)
-{
-	unsigned char *data = wacom_wac->data;
-	struct input_dev *input;
-	struct wacom *wacom = container_of(wacom_wac, struct wacom, wacom_wac);
-	struct wacom_remote *remote = wacom->remote;
-	int bat_charging, bat_percent, touch_ring_mode;
-	__u32 serial;
-	int i, index = -1;
-	unsigned long flags;
-
-	if (data[0] != WACOM_REPORT_REMOTE) {
-		hid_dbg(wacom->hdev, "%s: received unknown report #%d",
-			__func__, data[0]);
-		return 0;
-	}
-
-	serial = data[3] + (data[4] << 8) + (data[5] << 16);
-	wacom_wac->id[0] = PAD_DEVICE_ID;
-
-	spin_lock_irqsave(&remote->remote_lock, flags);
-
-	for (i = 0; i < WACOM_MAX_REMOTES; i++) {
-		if (remote->remotes[i].serial == serial) {
-			index = i;
-			break;
-		}
-	}
-
-	if (index < 0 || !remote->remotes[index].registered)
-		goto out;
-
-	input = remote->remotes[index].input;
-
-	input_report_key(input, BTN_0, (data[9] & 0x01));
-	input_report_key(input, BTN_1, (data[9] & 0x02));
-	input_report_key(input, BTN_2, (data[9] & 0x04));
-	input_report_key(input, BTN_3, (data[9] & 0x08));
-	input_report_key(input, BTN_4, (data[9] & 0x10));
-	input_report_key(input, BTN_5, (data[9] & 0x20));
-	input_report_key(input, BTN_6, (data[9] & 0x40));
-	input_report_key(input, BTN_7, (data[9] & 0x80));
-
-	input_report_key(input, BTN_8, (data[10] & 0x01));
-	input_report_key(input, BTN_9, (data[10] & 0x02));
-	input_report_key(input, BTN_A, (data[10] & 0x04));
-	input_report_key(input, BTN_B, (data[10] & 0x08));
-	input_report_key(input, BTN_C, (data[10] & 0x10));
-	input_report_key(input, BTN_X, (data[10] & 0x20));
-	input_report_key(input, BTN_Y, (data[10] & 0x40));
-	input_report_key(input, BTN_Z, (data[10] & 0x80));
-
-	input_report_key(input, BTN_BASE, (data[11] & 0x01));
-	input_report_key(input, BTN_BASE2, (data[11] & 0x02));
-
-	if (data[12] & 0x80)
-		input_report_abs(input, ABS_WHEEL, (data[12] & 0x7f));
-	else
-		input_report_abs(input, ABS_WHEEL, 0);
-
-	bat_percent = data[7] & 0x7f;
-	bat_charging = !!(data[7] & 0x80);
-
-	if (data[9] | data[10] | (data[11] & 0x03) | data[12])
-		input_report_abs(input, ABS_MISC, PAD_DEVICE_ID);
-	else
-		input_report_abs(input, ABS_MISC, 0);
-
-	input_event(input, EV_MSC, MSC_SERIAL, serial);
-
-	input_sync(input);
-
-	/*Which mode select (LED light) is currently on?*/
-	touch_ring_mode = (data[11] & 0xC0) >> 6;
-
-	for (i = 0; i < WACOM_MAX_REMOTES; i++) {
-		if (remote->remotes[i].serial == serial)
-			wacom->led.groups[i].select = touch_ring_mode;
-	}
-
-	__wacom_notify_battery(&remote->remotes[index].battery, bat_percent,
-				bat_charging, 1, bat_charging);
-
-out:
-	spin_unlock_irqrestore(&remote->remote_lock, flags);
-	return 0;
-}
-
-static void wacom_remote_status_irq(struct wacom_wac *wacom_wac, size_t len)
-{
-	struct wacom *wacom = container_of(wacom_wac, struct wacom, wacom_wac);
-	unsigned char *data = wacom_wac->data;
-	struct wacom_remote *remote = wacom->remote;
-	struct wacom_remote_data remote_data;
-	unsigned long flags;
-	int i, ret;
-
-	if (data[0] != WACOM_REPORT_DEVICE_LIST)
-		return;
-
-	memset(&remote_data, 0, sizeof(struct wacom_remote_data));
-
-	for (i = 0; i < WACOM_MAX_REMOTES; i++) {
-		int j = i * 6;
-		int serial = (data[j+6] << 16) + (data[j+5] << 8) + data[j+4];
-		bool connected = data[j+2];
-
-		remote_data.remote[i].serial = serial;
-		remote_data.remote[i].connected = connected;
-	}
-
-	spin_lock_irqsave(&remote->remote_lock, flags);
-
-	ret = kfifo_in(&remote->remote_fifo, &remote_data, sizeof(remote_data));
-	if (ret != sizeof(remote_data)) {
-		spin_unlock_irqrestore(&remote->remote_lock, flags);
-		hid_err(wacom->hdev, "Can't queue Remote status event.\n");
-		return;
-	}
-
-	spin_unlock_irqrestore(&remote->remote_lock, flags);
-
-	wacom_schedule_work(wacom_wac, WACOM_WORKER_REMOTE);
-}
-
 static inline bool report_touch_events(struct wacom_wac *wacom)
 {
 	return (touch_arbitration ? !wacom->shared->stylus_in_proximity : 1);
@@ -1116,6 +991,131 @@ static int wacom_intuos_irq(struct wacom_wac *wacom)
 	return 0;
 }
 
+static int wacom_remote_irq(struct wacom_wac *wacom_wac, size_t len)
+{
+	unsigned char *data = wacom_wac->data;
+	struct input_dev *input;
+	struct wacom *wacom = container_of(wacom_wac, struct wacom, wacom_wac);
+	struct wacom_remote *remote = wacom->remote;
+	int bat_charging, bat_percent, touch_ring_mode;
+	__u32 serial;
+	int i, index = -1;
+	unsigned long flags;
+
+	if (data[0] != WACOM_REPORT_REMOTE) {
+		hid_dbg(wacom->hdev, "%s: received unknown report #%d",
+			__func__, data[0]);
+		return 0;
+	}
+
+	serial = data[3] + (data[4] << 8) + (data[5] << 16);
+	wacom_wac->id[0] = PAD_DEVICE_ID;
+
+	spin_lock_irqsave(&remote->remote_lock, flags);
+
+	for (i = 0; i < WACOM_MAX_REMOTES; i++) {
+		if (remote->remotes[i].serial == serial) {
+			index = i;
+			break;
+		}
+	}
+
+	if (index < 0 || !remote->remotes[index].registered)
+		goto out;
+
+	input = remote->remotes[index].input;
+
+	input_report_key(input, BTN_0, (data[9] & 0x01));
+	input_report_key(input, BTN_1, (data[9] & 0x02));
+	input_report_key(input, BTN_2, (data[9] & 0x04));
+	input_report_key(input, BTN_3, (data[9] & 0x08));
+	input_report_key(input, BTN_4, (data[9] & 0x10));
+	input_report_key(input, BTN_5, (data[9] & 0x20));
+	input_report_key(input, BTN_6, (data[9] & 0x40));
+	input_report_key(input, BTN_7, (data[9] & 0x80));
+
+	input_report_key(input, BTN_8, (data[10] & 0x01));
+	input_report_key(input, BTN_9, (data[10] & 0x02));
+	input_report_key(input, BTN_A, (data[10] & 0x04));
+	input_report_key(input, BTN_B, (data[10] & 0x08));
+	input_report_key(input, BTN_C, (data[10] & 0x10));
+	input_report_key(input, BTN_X, (data[10] & 0x20));
+	input_report_key(input, BTN_Y, (data[10] & 0x40));
+	input_report_key(input, BTN_Z, (data[10] & 0x80));
+
+	input_report_key(input, BTN_BASE, (data[11] & 0x01));
+	input_report_key(input, BTN_BASE2, (data[11] & 0x02));
+
+	if (data[12] & 0x80)
+		input_report_abs(input, ABS_WHEEL, (data[12] & 0x7f));
+	else
+		input_report_abs(input, ABS_WHEEL, 0);
+
+	bat_percent = data[7] & 0x7f;
+	bat_charging = !!(data[7] & 0x80);
+
+	if (data[9] | data[10] | (data[11] & 0x03) | data[12])
+		input_report_abs(input, ABS_MISC, PAD_DEVICE_ID);
+	else
+		input_report_abs(input, ABS_MISC, 0);
+
+	input_event(input, EV_MSC, MSC_SERIAL, serial);
+
+	input_sync(input);
+
+	/*Which mode select (LED light) is currently on?*/
+	touch_ring_mode = (data[11] & 0xC0) >> 6;
+
+	for (i = 0; i < WACOM_MAX_REMOTES; i++) {
+		if (remote->remotes[i].serial == serial)
+			wacom->led.groups[i].select = touch_ring_mode;
+	}
+
+	__wacom_notify_battery(&remote->remotes[index].battery, bat_percent,
+				bat_charging, 1, bat_charging);
+
+out:
+	spin_unlock_irqrestore(&remote->remote_lock, flags);
+	return 0;
+}
+
+static void wacom_remote_status_irq(struct wacom_wac *wacom_wac, size_t len)
+{
+	struct wacom *wacom = container_of(wacom_wac, struct wacom, wacom_wac);
+	unsigned char *data = wacom_wac->data;
+	struct wacom_remote *remote = wacom->remote;
+	struct wacom_remote_data remote_data;
+	unsigned long flags;
+	int i, ret;
+
+	if (data[0] != WACOM_REPORT_DEVICE_LIST)
+		return;
+
+	memset(&remote_data, 0, sizeof(struct wacom_remote_data));
+
+	for (i = 0; i < WACOM_MAX_REMOTES; i++) {
+		int j = i * 6;
+		int serial = (data[j+6] << 16) + (data[j+5] << 8) + data[j+4];
+		bool connected = data[j+2];
+
+		remote_data.remote[i].serial = serial;
+		remote_data.remote[i].connected = connected;
+	}
+
+	spin_lock_irqsave(&remote->remote_lock, flags);
+
+	ret = kfifo_in(&remote->remote_fifo, &remote_data, sizeof(remote_data));
+	if (ret != sizeof(remote_data)) {
+		spin_unlock_irqrestore(&remote->remote_lock, flags);
+		hid_err(wacom->hdev, "Can't queue Remote status event.\n");
+		return;
+	}
+
+	spin_unlock_irqrestore(&remote->remote_lock, flags);
+
+	wacom_schedule_work(wacom_wac, WACOM_WORKER_REMOTE);
+}
+
 static int int_dist(int x1, int y1, int x2, int y2)
 {
 	int x = x2 - x1;
@@ -1739,6 +1739,7 @@ static void wacom_wac_pad_usage_mapping(struct hid_device *hdev,
 		features->device_type |= WACOM_DEVICETYPE_PAD;
 		break;
 	case WACOM_HID_WD_TOUCHONOFF:
+	case WACOM_HID_WD_MUTE_DEVICE:
 		/*
 		 * This usage, which is used to mute touch events, comes
 		 * from the pad packet, but is reported on the touch
@@ -1768,6 +1769,26 @@ static void wacom_wac_pad_usage_mapping(struct hid_device *hdev,
 		wacom_map_usage(input, usage, field, EV_ABS, ABS_WHEEL, 0);
 		features->device_type |= WACOM_DEVICETYPE_PAD;
 		break;
+	case WACOM_HID_WD_BUTTONCONFIG:
+		wacom_map_usage(input, usage, field, EV_KEY, KEY_BUTTONCONFIG, 0);
+		features->device_type |= WACOM_DEVICETYPE_PAD;
+		break;
+	case WACOM_HID_WD_ONSCREEN_KEYBOARD:
+		wacom_map_usage(input, usage, field, EV_KEY, KEY_ONSCREEN_KEYBOARD, 0);
+		features->device_type |= WACOM_DEVICETYPE_PAD;
+		break;
+	case WACOM_HID_WD_CONTROLPANEL:
+		wacom_map_usage(input, usage, field, EV_KEY, KEY_CONTROLPANEL, 0);
+		features->device_type |= WACOM_DEVICETYPE_PAD;
+		break;
+	case WACOM_HID_WD_MODE_CHANGE:
+		/* do not overwrite previous data */
+		if (!wacom_wac->has_mode_change) {
+			wacom_wac->has_mode_change = true;
+			wacom_wac->is_direct_mode = true;
+		}
+		features->device_type |= WACOM_DEVICETYPE_PAD;
+		break;
 	}
 
 	switch (equivalent_usage & 0xfffffff0) {
@@ -1811,12 +1832,13 @@ static void wacom_wac_pad_event(struct hid_device *hdev, struct hid_field *field
 	struct wacom_features *features = &wacom_wac->features;
 	unsigned equivalent_usage = wacom_equivalent_usage(usage->hid);
 	int i;
+	bool is_touch_on = value;
 
 	/*
 	 * Avoid reporting this event and setting inrange_state if this usage
 	 * hasn't been mapped.
 	 */
-	if (!usage->type)
+	if (!usage->type && equivalent_usage != WACOM_HID_WD_MODE_CHANGE)
 		return;
 
 	if (wacom_equivalent_usage(field->physical) == HID_DG_TABLETFUNCTIONKEY) {
@@ -1830,14 +1852,28 @@ static void wacom_wac_pad_event(struct hid_device *hdev, struct hid_field *field
 			input_event(input, usage->type, usage->code, 0);
 		break;
 
+	case WACOM_HID_WD_MUTE_DEVICE:
+		if (wacom_wac->shared->touch_input && value) {
+			wacom_wac->shared->is_touch_on = !wacom_wac->shared->is_touch_on;
+			is_touch_on = wacom_wac->shared->is_touch_on;
+		}
+
+		/* fall through*/
 	case WACOM_HID_WD_TOUCHONOFF:
 		if (wacom_wac->shared->touch_input) {
 			input_report_switch(wacom_wac->shared->touch_input,
-					    SW_MUTE_DEVICE, !value);
+					    SW_MUTE_DEVICE, !is_touch_on);
 			input_sync(wacom_wac->shared->touch_input);
 		}
 		break;
 
+	case WACOM_HID_WD_MODE_CHANGE:
+		if (wacom_wac->is_direct_mode != value) {
+			wacom_wac->is_direct_mode = value;
+			wacom_schedule_work(&wacom->wacom_wac, WACOM_WORKER_MODE_CHANGE);
+		}
+		break;
+
 	case WACOM_HID_WD_BUTTONCENTER:
 		for (i = 0; i < wacom->led.count; i++)
 			wacom_update_led(wacom, features->numbered_buttons,
@@ -1845,6 +1881,8 @@ static void wacom_wac_pad_event(struct hid_device *hdev, struct hid_field *field
 		 /* fall through*/
 	default:
 		input_event(input, usage->type, usage->code, value);
+		if (value)
+			wacom_wac->hid_data.pad_input_event_flag = true;
 		break;
 	}
 }
@@ -1885,9 +1923,12 @@ static void wacom_wac_pad_report(struct hid_device *hdev,
 	bool active = wacom_wac->hid_data.inrange_state != 0;
 
 	/* report prox for expresskey events */
-	if (wacom_equivalent_usage(report->field[0]->physical) == HID_DG_TABLETFUNCTIONKEY) {
+	if ((wacom_equivalent_usage(report->field[0]->physical) == HID_DG_TABLETFUNCTIONKEY) &&
+	    wacom_wac->hid_data.pad_input_event_flag) {
 		input_event(input, EV_ABS, ABS_MISC, active ? PAD_DEVICE_ID : 0);
 		input_sync(input);
+		if (!active)
+			wacom_wac->hid_data.pad_input_event_flag = false;
 	}
 
 }
@@ -2197,6 +2238,13 @@ static void wacom_wac_finger_slot(struct wacom_wac *wacom_wac,
 	bool prox = hid_data->tipswitch &&
 		    report_touch_events(wacom_wac);
 
+	if (wacom_wac->shared->has_mute_touch_switch &&
+	    !wacom_wac->shared->is_touch_on) {
+		if (!wacom_wac->shared->touch_down)
+			return;
+		prox = 0;
+	}
+
 	wacom_wac->hid_data.num_received++;
 	if (wacom_wac->hid_data.num_received > wacom_wac->hid_data.num_expected)
 		return;
@@ -4127,7 +4175,7 @@ static const struct wacom_features wacom_features_0x300 =
 	  BAMBOO_PEN, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
 static const struct wacom_features wacom_features_0x301 =
 	{ "Wacom Bamboo One M", 21648, 13530, 1023, 31,
-	  BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
+	  BAMBOO_PEN, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
 static const struct wacom_features wacom_features_0x302 =
 	{ "Wacom Intuos PT S", 15200, 9500, 1023, 31,
 	  INTUOSHT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 16,
diff --git a/drivers/hid/wacom_wac.h b/drivers/hid/wacom_wac.h
index 857ccee16f38..570d29582b82 100644
--- a/drivers/hid/wacom_wac.h
+++ b/drivers/hid/wacom_wac.h
@@ -120,6 +120,11 @@
 #define WACOM_HID_WD_BATTERY_LEVEL      (WACOM_HID_UP_WACOMDIGITIZER | 0x043b)
 #define WACOM_HID_WD_EXPRESSKEY00       (WACOM_HID_UP_WACOMDIGITIZER | 0x0910)
 #define WACOM_HID_WD_EXPRESSKEYCAP00    (WACOM_HID_UP_WACOMDIGITIZER | 0x0950)
+#define WACOM_HID_WD_MODE_CHANGE        (WACOM_HID_UP_WACOMDIGITIZER | 0x0980)
+#define WACOM_HID_WD_MUTE_DEVICE        (WACOM_HID_UP_WACOMDIGITIZER | 0x0981)
+#define WACOM_HID_WD_CONTROLPANEL       (WACOM_HID_UP_WACOMDIGITIZER | 0x0982)
+#define WACOM_HID_WD_ONSCREEN_KEYBOARD  (WACOM_HID_UP_WACOMDIGITIZER | 0x0983)
+#define WACOM_HID_WD_BUTTONCONFIG       (WACOM_HID_UP_WACOMDIGITIZER | 0x0986)
 #define WACOM_HID_WD_BUTTONHOME         (WACOM_HID_UP_WACOMDIGITIZER | 0x0990)
 #define WACOM_HID_WD_BUTTONUP           (WACOM_HID_UP_WACOMDIGITIZER | 0x0991)
 #define WACOM_HID_WD_BUTTONDOWN         (WACOM_HID_UP_WACOMDIGITIZER | 0x0992)
@@ -270,6 +275,7 @@ struct wacom_shared {
 	struct hid_device *pen;
 	struct hid_device *touch;
 	bool has_mute_touch_switch;
+	bool is_touch_on;
 };
 
 struct hid_data {
@@ -295,6 +301,7 @@ struct hid_data {
 	int bat_charging;
 	int bat_connected;
 	int ps_connected;
+	bool pad_input_event_flag;
 };
 
 struct wacom_remote_data {
@@ -327,6 +334,9 @@ struct wacom_wac {
 	int mode_value;
 	struct hid_data hid_data;
 	bool has_mute_touch_switch;
+	bool has_mode_change;
+	bool is_direct_mode;
+
 };
 
 #endif
diff --git a/include/linux/hid.h b/include/linux/hid.h
index 28f38e2b8f30..5be325d890d9 100644
--- a/include/linux/hid.h
+++ b/include/linux/hid.h
@@ -268,6 +268,8 @@ struct hid_item {
 #define HID_CP_APPLICATIONLAUNCHBUTTONS	0x000c0180
 #define HID_CP_GENERICGUIAPPLICATIONCONTROLS	0x000c0200
 
+#define HID_DG_DEVICECONFIG	0x000d000e
+#define HID_DG_DEVICESETTINGS	0x000d0023
 #define HID_DG_CONFIDENCE	0x000d0047
 #define HID_DG_WIDTH		0x000d0048
 #define HID_DG_HEIGHT		0x000d0049
@@ -322,7 +324,7 @@ struct hid_item {
 #define HID_QUIRK_MULTI_INPUT			0x00000040
 #define HID_QUIRK_HIDINPUT_FORCE		0x00000080
 #define HID_QUIRK_NO_EMPTY_INPUT		0x00000100
-#define HID_QUIRK_NO_INIT_INPUT_REPORTS		0x00000200
+/* 0x00000200 reserved for backward compatibility, was NO_INIT_INPUT_REPORTS */
 #define HID_QUIRK_ALWAYS_POLL			0x00000400
 #define HID_QUIRK_SKIP_OUTPUT_REPORTS		0x00010000
 #define HID_QUIRK_SKIP_OUTPUT_REPORT_ID		0x00020000
@@ -541,7 +543,6 @@ struct hid_device {							/* device report descriptor */
 	struct list_head inputs;					/* The list of inputs */
 	void *hiddev;							/* The hiddev structure */
 	void *hidraw;
-	int minor;							/* Hiddev minor number */
 
 	int open;							/* is the device open by anyone? */
 	char name[128];							/* Device name */
diff --git a/include/linux/hiddev.h b/include/linux/hiddev.h
index a5dd8148660b..921622222957 100644
--- a/include/linux/hiddev.h
+++ b/include/linux/hiddev.h
@@ -32,6 +32,18 @@
  * In-kernel definitions.
  */
 
+struct hiddev {
+	int minor;
+	int exist;
+	int open;
+	struct mutex existancelock;
+	wait_queue_head_t wait;
+	struct hid_device *hid;
+	struct list_head list;
+	spinlock_t list_lock;
+	bool initialized;
+};
+
 struct hid_device;
 struct hid_usage;
 struct hid_field;
diff --git a/include/linux/i2c/i2c-hid.h b/include/linux/i2c/i2c-hid.h
index 7aa901d92058..1fb088239d12 100644
--- a/include/linux/i2c/i2c-hid.h
+++ b/include/linux/i2c/i2c-hid.h
@@ -14,9 +14,13 @@
 
 #include <linux/types.h>
 
+struct regulator;
+
 /**
  * struct i2chid_platform_data - used by hid over i2c implementation.
  * @hid_descriptor_address: i2c register where the HID descriptor is stored.
+ * @supply: regulator for powering on the device.
+ * @post_power_delay_ms: delay after powering on before device is usable.
  *
  * Note that it is the responsibility of the platform driver (or the acpi 5.0
  * driver, or the flattened device tree) to setup the irq related to the gpio in
@@ -31,6 +35,8 @@
  */
 struct i2c_hid_platform_data {
 	u16 hid_descriptor_address;
+	struct regulator *supply;
+	int post_power_delay_ms;
 };
 
 #endif /* __LINUX_I2C_HID_H */
diff --git a/include/uapi/linux/input-event-codes.h b/include/uapi/linux/input-event-codes.h
index 3af60ee69053..f5a8d96e1e09 100644
--- a/include/uapi/linux/input-event-codes.h
+++ b/include/uapi/linux/input-event-codes.h
@@ -641,6 +641,7 @@
  * e.g. teletext or data broadcast application (MHEG, MHP, HbbTV, etc.)
  */
 #define KEY_DATA			0x277
+#define KEY_ONSCREEN_KEYBOARD		0x278
 
 #define BTN_TRIGGER_HAPPY		0x2c0
 #define BTN_TRIGGER_HAPPY1		0x2c0
diff --git a/include/uapi/linux/input.h b/include/uapi/linux/input.h
index e794f7bee22f..f561c0eb7d63 100644
--- a/include/uapi/linux/input.h
+++ b/include/uapi/linux/input.h
@@ -61,9 +61,14 @@ struct input_id {
  * Note that input core does not clamp reported values to the
  * [minimum, maximum] limits, such task is left to userspace.
  *
- * Resolution for main axes (ABS_X, ABS_Y, ABS_Z) is reported in
- * units per millimeter (units/mm), resolution for rotational axes
- * (ABS_RX, ABS_RY, ABS_RZ) is reported in units per radian.
+ * The default resolution for main axes (ABS_X, ABS_Y, ABS_Z)
+ * is reported in units per millimeter (units/mm), resolution
+ * for rotational axes (ABS_RX, ABS_RY, ABS_RZ) is reported
+ * in units per radian.
+ * When INPUT_PROP_ACCELEROMETER is set the resolution changes.
+ * The main axes (ABS_X, ABS_Y, ABS_Z) are then reported in
+ * in units per g (units/g) and in units per degree per second
+ * (units/deg/s) for rotational axes (ABS_RX, ABS_RY, ABS_RZ).
  */
 struct input_absinfo {
 	__s32 value;