summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2018-06-11 17:57:38 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2018-06-11 17:57:38 -0700
commit721afaa2aeb860067decdddadc84ed16f42f2048 (patch)
treec529f0aaaa6653ff3cb6fd1bae90faeddbc1f715
parent7c00e8ae041b349992047769af741b67379ce19a (diff)
parent87815dda55934180d8e6ec0a0a448b104d251c54 (diff)
downloadlinux-721afaa2aeb860067decdddadc84ed16f42f2048.tar.bz2
Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC device tree updates from Olof Johansson: "As always, a large number of DT updates. Too many to enumerate them all, but at a glance: New SoCs introduced in this release: - Amlogic: + Meson 8M2 SoC, a.k.a. S812. A quad Cortex-A9 SoC used in some set top boxes and other products. - Mediatek: + MT7623A, which is a flavor of the MT7623 family with other on-chip ethernet options. - Qualcomm: + SDM845, a.k.a Snapdragon 845, an 4+4-core Kryo 385/845 (Cortex-A75/A55 derivative) SoC that's one of the current high-end mobile SoCs. It's great to see mainline support for it. So far, you can't do much with it, since a lot of peripherals are not yet in the DTs but driver support for USB, GPU and other pieces are starting to trickle in. This might end up being a well-supported SoC upstream if the momentum keeps up. - Renesas: + R8A77990, a.k.a R-Car E3, a new automotive entertainment-targeted SoC. Currently only one Cortex-A53 CPU is enabled, we are eagerly awaiting more. So far, basic drivers such as serial, gpios, PMU and ethernet are enabled. + R8A77470, a.k.a. RZ/G1C, a new dual Cortex-A7 SoC with PowerVR GPU. Same here, basic set of drivers such as serial, gpios and ethernet enabled, and SMP support is also forthcoming. - STMicroelectronics: + STM32F469, very similar tih STM32F429 but with display support Enhancements to SoCs/platforms (DTS contents, some driver portions might not be in yet): - Allwinner sun8i (h3/a33/a83t) SMP, DVFS tweaks, misc - Amlogic Meson: I2C, UFS, TDM, GPIO external interrupts, MMC resets - Hisilicon hi3660: Thermal cooling, CPU frequency scaling, mailbox interfaces - Marvell Berlin2CD: SMP support, thermal sensors - Mediatek MT7623: Highspeed DMA, audio support - Qualcomm IPQ8074 PCIe support, MSM8996 UFS support - Renesas: Watchdog and PMU support across many platforms - Rockchip RK3399: USB3 OTG support - Samsung Exynos: Audio-over-HDMI on Odroid X/X2/U3 - STMicro STM32: Lots of peripherals added to STM32MP175C - Uniphier: Ethernet support New boards: - Allwinner A20: Olimex A20-SOM-EVB-eMMC variant - Allwinner H2+: Libre Computer ALL-H3-CC (h2+ version) - Allwinner A33: Nintendo NES/SuperNES Classic Edition - Aspeed: S2600WF, Inventec Lanyang BMC, Portwell Neptune - Berlin2CD: Valve Steam Link - Broadcom BCM5301X: Luxul XAP-1610 and XWR-3150 V1 - Broadcom: Raspberry Pi 3 B+ - Mediatek MT7623N and MT7623A: reference boards - Meson 8M2: Tronsmart MXIII Plus - NXP i.MX: Engicam i.CoreM6, DHCOM iMX6 SOM, BTicino i.MX6DL Mamoj - Qualcomm MSM8974: Sony Xperia Z1 Compact support - Qualcomm SDM845: MTP development board - Renesas: Ebisu R8A77990 board - Renesas RZ/G1C: iwg23s: iWave G235-SDB - TI am335x: Pocketbeagle support" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (448 commits) ARM: dts: aspeed: Fix hwrng register address arm64: dts: sprd: whale2: Add the rtc enable clock for watchdog arm64: dts: sprd: Add GPIO and GPIO keys device nodes arm64: dts: sprd: fix typo in 'remote-endpoint' arm64: dts: apq8096-db820c: Removed bt-en-1-8v regulator arm64: dts: fix regulator property name for wlan pcie endpoint arm64: dts: qcom: msm8996: Use UFS_GDSC for UFS ARM: dts: pxa3xx: fix MMC clocks ARM: pxa: dts: add pin definitions for extended GPIOs ARM: pxa: dts: add gpio-ranges to gpio controller ARM: dts: ipq8074: Enable few peripherals for hk01 board ARM: dts: ipq8074: Add pcie nodes ARM: dts: ipq8074: Add peripheral nodes ARM: dts: ipq4019: Add qcom-ipq4019-ap.dk07.1-c2 board file ARM: dts: ipq4019: Add qcom-ipq4019-ap.dk07.1-c1 board file ARM: dts: ipq4019: Add ipq4019-ap.dk07.1 common data ARM: dts: ipq4019: Add qcom-ipq4019-ap.dk04.1-c3 board file ARM: dts: ipq4019: Add ipq4019-ap.dk04.1-c1 board file ARM: dts: ipq4019: Add ipq4019-ap.dk04.dtsi ARM: dts: ipq4019: Change the max opp frequency ...
-rw-r--r--Documentation/arm/OMAP/README4
-rw-r--r--Documentation/devicetree/bindings/arm/amlogic.txt6
-rw-r--r--Documentation/devicetree/bindings/arm/bcm/brcm,bcm2835.txt4
-rw-r--r--Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt2
-rw-r--r--Documentation/devicetree/bindings/arm/shmobile.txt10
-rw-r--r--Documentation/devicetree/bindings/arm/tegra/nvidia,tegra30-mc.txt18
-rw-r--r--Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt16
-rw-r--r--Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-mc.txt12
-rw-r--r--Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-mc.txt5
-rw-r--r--Documentation/devicetree/bindings/nvmem/allwinner,sunxi-sid.txt1
-rw-r--r--Documentation/devicetree/bindings/reserved-memory/qcom,cmd-db.txt37
-rw-r--r--Documentation/devicetree/bindings/rng/brcm,bcm2835.txt9
-rw-r--r--Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt119
-rw-r--r--Documentation/devicetree/bindings/timer/renesas,cmt.txt14
-rw-r--r--Documentation/devicetree/bindings/vendor-prefixes.txt2
-rw-r--r--arch/arm/boot/dts/Makefile40
-rw-r--r--arch/arm/boot/dts/am335x-baltos-ir3220.dts2
-rw-r--r--arch/arm/boot/dts/am335x-baltos-ir5221.dts2
-rw-r--r--arch/arm/boot/dts/am335x-baltos.dtsi2
-rw-r--r--arch/arm/boot/dts/am335x-bone-common.dtsi9
-rw-r--r--arch/arm/boot/dts/am335x-boneblue.dts2
-rw-r--r--arch/arm/boot/dts/am335x-evm.dts9
-rw-r--r--arch/arm/boot/dts/am335x-evmsk.dts12
-rw-r--r--arch/arm/boot/dts/am335x-osd335x-common.dtsi124
-rw-r--r--arch/arm/boot/dts/am335x-pocketbeagle.dts237
-rw-r--r--arch/arm/boot/dts/am3517-evm.dts233
-rw-r--r--arch/arm/boot/dts/am3517-som.dtsi142
-rw-r--r--arch/arm/boot/dts/am437x-cm-t43.dts2
-rw-r--r--arch/arm/boot/dts/am437x-gp-evm.dts2
-rw-r--r--arch/arm/boot/dts/am437x-sk-evm.dts115
-rw-r--r--arch/arm/boot/dts/am43x-epos-evm.dts2
-rw-r--r--arch/arm/boot/dts/am571x-idk.dts5
-rw-r--r--arch/arm/boot/dts/am572x-idk.dts5
-rw-r--r--arch/arm/boot/dts/am574x-idk.dts20
-rw-r--r--arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi4
-rw-r--r--arch/arm/boot/dts/am57xx-beagle-x15.dts3
-rw-r--r--arch/arm/boot/dts/am57xx-idk-common.dtsi14
-rw-r--r--arch/arm/boot/dts/armada-370-db.dts57
-rw-r--r--arch/arm/boot/dts/armada-370-dlink-dns327l.dts120
-rw-r--r--arch/arm/boot/dts/armada-370-mirabox.dts51
-rw-r--r--arch/arm/boot/dts/armada-370-netgear-rn102.dts90
-rw-r--r--arch/arm/boot/dts/armada-370-netgear-rn104.dts90
-rw-r--r--arch/arm/boot/dts/armada-370-rd.dts52
-rw-r--r--arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi64
-rw-r--r--arch/arm/boot/dts/armada-370-xp.dtsi6
-rw-r--r--arch/arm/boot/dts/armada-375-db.dts50
-rw-r--r--arch/arm/boot/dts/armada-375.dtsi6
-rw-r--r--arch/arm/boot/dts/armada-385-db-ap.dts69
-rw-r--r--arch/arm/boot/dts/armada-385-linksys-caiman.dts129
-rw-r--r--arch/arm/boot/dts/armada-385-linksys-cobra.dts129
-rw-r--r--arch/arm/boot/dts/armada-385-linksys-rango.dts141
-rw-r--r--arch/arm/boot/dts/armada-385-linksys-shelby.dts129
-rw-r--r--arch/arm/boot/dts/armada-385-linksys.dtsi16
-rw-r--r--arch/arm/boot/dts/armada-388-db.dts55
-rw-r--r--arch/arm/boot/dts/armada-38x.dtsi6
-rw-r--r--arch/arm/boot/dts/armada-390-db.dts66
-rw-r--r--arch/arm/boot/dts/armada-395-gp.dts74
-rw-r--r--arch/arm/boot/dts/armada-398-db.dts60
-rw-r--r--arch/arm/boot/dts/armada-39x.dtsi6
-rw-r--r--arch/arm/boot/dts/armada-xp-98dx3236.dtsi13
-rw-r--r--arch/arm/boot/dts/armada-xp-db-dxbc2.dts2
-rw-r--r--arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts2
-rw-r--r--arch/arm/boot/dts/armada-xp-db.dts2
-rw-r--r--arch/arm/boot/dts/armada-xp-gp.dts2
-rw-r--r--arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts2
-rw-r--r--arch/arm/boot/dts/armada-xp-linksys-mamba.dts156
-rw-r--r--arch/arm/boot/dts/armada-xp-netgear-rn2120.dts90
-rw-r--r--arch/arm/boot/dts/aspeed-ast2500-evb.dts18
-rw-r--r--arch/arm/boot/dts/aspeed-bmc-intel-s2600wf.dts129
-rw-r--r--arch/arm/boot/dts/aspeed-bmc-opp-lanyang.dts325
-rw-r--r--arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts6
-rw-r--r--arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts32
-rw-r--r--arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts6
-rw-r--r--arch/arm/boot/dts/aspeed-bmc-portwell-neptune.dts159
-rw-r--r--arch/arm/boot/dts/aspeed-g4.dtsi35
-rw-r--r--arch/arm/boot/dts/aspeed-g5.dtsi47
-rw-r--r--arch/arm/boot/dts/at91-sama5d2_xplained.dts2
-rw-r--r--arch/arm/boot/dts/at91-sama5d4ek.dts4
-rw-r--r--arch/arm/boot/dts/bcm2835-rpi-a-plus.dts6
-rw-r--r--arch/arm/boot/dts/bcm2835-rpi-a.dts6
-rw-r--r--arch/arm/boot/dts/bcm2835-rpi-b-plus.dts6
-rw-r--r--arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts6
-rw-r--r--arch/arm/boot/dts/bcm2835-rpi-b.dts6
-rw-r--r--arch/arm/boot/dts/bcm2835-rpi.dtsi6
-rw-r--r--arch/arm/boot/dts/bcm2836-rpi-2-b.dts6
-rw-r--r--arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts108
-rw-r--r--arch/arm/boot/dts/bcm2837-rpi-3-b.dts26
-rw-r--r--arch/arm/boot/dts/bcm283x-rpi-lan7515.dtsi27
-rw-r--r--arch/arm/boot/dts/bcm283x.dtsi1
-rw-r--r--arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts13
-rw-r--r--arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts13
-rw-r--r--arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts3
-rw-r--r--arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts3
-rw-r--r--arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts3
-rw-r--r--arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts15
-rw-r--r--arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts13
-rw-r--r--arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts3
-rw-r--r--arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts13
-rw-r--r--arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts13
-rw-r--r--arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts13
-rw-r--r--arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts3
-rw-r--r--arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts3
-rw-r--r--arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts3
-rw-r--r--arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts13
-rw-r--r--arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts3
-rw-r--r--arch/arm/boot/dts/bcm4709-linksys-ea9200.dts3
-rw-r--r--arch/arm/boot/dts/bcm4709-netgear-r7000.dts13
-rw-r--r--arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts3
-rw-r--r--arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts25
-rw-r--r--arch/arm/boot/dts/bcm47094-linksys-panamera.dts3
-rw-r--r--arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts3
-rw-r--r--arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts57
-rw-r--r--arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts3
-rw-r--r--arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts3
-rw-r--r--arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts77
-rw-r--r--arch/arm/boot/dts/bcm47094-netgear-r8500.dts3
-rw-r--r--arch/arm/boot/dts/bcm5301x-nand-cs0-bch1.dtsi3
-rw-r--r--arch/arm/boot/dts/bcm5301x-nand-cs0-bch4.dtsi3
-rw-r--r--arch/arm/boot/dts/bcm5301x-nand-cs0-bch8.dtsi3
-rw-r--r--arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi3
-rw-r--r--arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts33
-rw-r--r--arch/arm/boot/dts/berlin2.dtsi35
-rw-r--r--arch/arm/boot/dts/berlin2cd-google-chromecast.dts65
-rw-r--r--arch/arm/boot/dts/berlin2cd-valve-steamlink.dts79
-rw-r--r--arch/arm/boot/dts/berlin2cd.dtsi167
-rw-r--r--arch/arm/boot/dts/berlin2q-marvell-dmp.dts33
-rw-r--r--arch/arm/boot/dts/berlin2q.dtsi65
-rw-r--r--arch/arm/boot/dts/da850-evm.dts298
-rw-r--r--arch/arm/boot/dts/da850-lego-ev3.dts83
-rw-r--r--arch/arm/boot/dts/da850.dtsi154
-rw-r--r--arch/arm/boot/dts/dm8148-t410.dts2
-rw-r--r--arch/arm/boot/dts/dra7-evm-common.dtsi15
-rw-r--r--arch/arm/boot/dts/dra7-evm.dts68
-rw-r--r--arch/arm/boot/dts/dra7-mmc-iodelay.dtsi19
-rw-r--r--arch/arm/boot/dts/dra7.dtsi32
-rw-r--r--arch/arm/boot/dts/dra71-evm.dts17
-rw-r--r--arch/arm/boot/dts/dra72-evm-common.dtsi71
-rw-r--r--arch/arm/boot/dts/dra72x-mmc-iodelay.dtsi11
-rw-r--r--arch/arm/boot/dts/dra76-evm.dts34
-rw-r--r--arch/arm/boot/dts/exynos-syscon-restart.dtsi28
-rw-r--r--arch/arm/boot/dts/exynos3250-rinato.dts4
-rw-r--r--arch/arm/boot/dts/exynos3250.dtsi2
-rw-r--r--arch/arm/boot/dts/exynos4.dtsi3
-rw-r--r--arch/arm/boot/dts/exynos4210-origen.dts34
-rw-r--r--arch/arm/boot/dts/exynos4210-trats.dts4
-rw-r--r--arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi36
-rw-r--r--arch/arm/boot/dts/exynos4412-midas.dtsi86
-rw-r--r--arch/arm/boot/dts/exynos4412-n710x.dts16
-rw-r--r--arch/arm/boot/dts/exynos4412-odroid-common.dtsi33
-rw-r--r--arch/arm/boot/dts/exynos4412-odroidu3.dts6
-rw-r--r--arch/arm/boot/dts/exynos4412-odroidx.dts6
-rw-r--r--arch/arm/boot/dts/exynos4412-origen.dts2
-rw-r--r--arch/arm/boot/dts/exynos4412.dtsi2
-rw-r--r--arch/arm/boot/dts/exynos5.dtsi3
-rw-r--r--arch/arm/boot/dts/exynos5250.dtsi7
-rw-r--r--arch/arm/boot/dts/exynos5410.dtsi1
-rw-r--r--arch/arm/boot/dts/exynos5420-peach-pit.dts4
-rw-r--r--arch/arm/boot/dts/exynos5420.dtsi87
-rw-r--r--arch/arm/boot/dts/exynos5422-odroid-core.dtsi2
-rw-r--r--arch/arm/boot/dts/exynos5440-sd5v1.dts42
-rw-r--r--arch/arm/boot/dts/exynos5440-ssdk5440.dts81
-rw-r--r--arch/arm/boot/dts/exynos5440-tmu-sensor-conf.dtsi20
-rw-r--r--arch/arm/boot/dts/exynos5440-trip-points.dtsi21
-rw-r--r--arch/arm/boot/dts/exynos5440.dtsi355
-rw-r--r--arch/arm/boot/dts/exynos5800-peach-pi.dts4
-rw-r--r--arch/arm/boot/dts/gemini-dlink-dir-685.dts16
-rw-r--r--arch/arm/boot/dts/gemini-dlink-dns-313.dts19
-rw-r--r--arch/arm/boot/dts/gemini-nas4220b.dts20
-rw-r--r--arch/arm/boot/dts/gemini-rut1xx.dts12
-rw-r--r--arch/arm/boot/dts/gemini-sq201.dts12
-rw-r--r--arch/arm/boot/dts/gemini-wbd111.dts17
-rw-r--r--arch/arm/boot/dts/gemini-wbd222.dts16
-rw-r--r--arch/arm/boot/dts/gemini.dtsi2
-rw-r--r--arch/arm/boot/dts/imx1-ads.dts11
-rw-r--r--arch/arm/boot/dts/imx1.dtsi21
-rw-r--r--arch/arm/boot/dts/imx23-evk.dts13
-rw-r--r--arch/arm/boot/dts/imx23.dtsi13
-rw-r--r--arch/arm/boot/dts/imx25-pdk.dts14
-rw-r--r--arch/arm/boot/dts/imx25.dtsi16
-rw-r--r--arch/arm/boot/dts/imx27-apf27.dts13
-rw-r--r--arch/arm/boot/dts/imx27-pdk.dts13
-rw-r--r--arch/arm/boot/dts/imx27.dtsi18
-rw-r--r--arch/arm/boot/dts/imx28-cfa10049.dts2
-rw-r--r--arch/arm/boot/dts/imx28-duckbill-2-enocean.dts2
-rw-r--r--arch/arm/boot/dts/imx28-evk.dts13
-rw-r--r--arch/arm/boot/dts/imx28-tx28.dts14
-rw-r--r--arch/arm/boot/dts/imx28.dtsi13
-rw-r--r--arch/arm/boot/dts/imx31.dtsi13
-rw-r--r--arch/arm/boot/dts/imx35-pdk.dts15
-rw-r--r--arch/arm/boot/dts/imx35.dtsi14
-rw-r--r--arch/arm/boot/dts/imx50-evk.dts17
-rw-r--r--arch/arm/boot/dts/imx50.dtsi3
-rw-r--r--arch/arm/boot/dts/imx51-babbage.dts15
-rw-r--r--arch/arm/boot/dts/imx51-zii-rdu1.dts6
-rw-r--r--arch/arm/boot/dts/imx51.dtsi18
-rw-r--r--arch/arm/boot/dts/imx53-ard.dts11
-rw-r--r--arch/arm/boot/dts/imx53-m53.dtsi2
-rw-r--r--arch/arm/boot/dts/imx53-ppd.dts12
-rw-r--r--arch/arm/boot/dts/imx53-qsb-common.dtsi15
-rw-r--r--arch/arm/boot/dts/imx53-qsb.dts17
-rw-r--r--arch/arm/boot/dts/imx53-qsrb.dts15
-rw-r--r--arch/arm/boot/dts/imx53-smd.dts20
-rw-r--r--arch/arm/boot/dts/imx53-tx53-x03x.dts1
-rw-r--r--arch/arm/boot/dts/imx53-tx53.dtsi14
-rw-r--r--arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi2
-rw-r--r--arch/arm/boot/dts/imx53.dtsi11
-rw-r--r--arch/arm/boot/dts/imx6dl-aristainetos2_4.dts2
-rw-r--r--arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts15
-rw-r--r--arch/arm/boot/dts/imx6dl-mamoj.dts224
-rw-r--r--arch/arm/boot/dts/imx6dl-sabreauto.dts10
-rw-r--r--arch/arm/boot/dts/imx6dl-sabresd.dts10
-rw-r--r--arch/arm/boot/dts/imx6dl-udoo.dts6
-rw-r--r--arch/arm/boot/dts/imx6dl-wandboard-revb1.dts6
-rw-r--r--arch/arm/boot/dts/imx6dl-wandboard-revd1.dts6
-rw-r--r--arch/arm/boot/dts/imx6dl-wandboard.dts6
-rw-r--r--arch/arm/boot/dts/imx6dl.dtsi12
-rw-r--r--arch/arm/boot/dts/imx6q-b850v3.dts4
-rw-r--r--arch/arm/boot/dts/imx6q-ba16.dtsi7
-rw-r--r--arch/arm/boot/dts/imx6q-bx50v3.dtsi13
-rw-r--r--arch/arm/boot/dts/imx6q-dhcom-pdk2.dts151
-rw-r--r--arch/arm/boot/dts/imx6q-dhcom-som.dtsi476
-rw-r--r--arch/arm/boot/dts/imx6q-gk802.dts3
-rw-r--r--arch/arm/boot/dts/imx6q-icore-mipi.dts25
-rw-r--r--arch/arm/boot/dts/imx6q-icore-ofcap12.dts31
-rw-r--r--arch/arm/boot/dts/imx6q-kp-tpc.dts22
-rw-r--r--arch/arm/boot/dts/imx6q-kp.dtsi432
-rw-r--r--arch/arm/boot/dts/imx6q-novena.dts2
-rw-r--r--arch/arm/boot/dts/imx6q-pistachio.dts2
-rw-r--r--arch/arm/boot/dts/imx6q-sabreauto.dts15
-rw-r--r--arch/arm/boot/dts/imx6q-sabresd.dts15
-rw-r--r--arch/arm/boot/dts/imx6q-udoo.dts6
-rw-r--r--arch/arm/boot/dts/imx6q-utilite-pro.dts2
-rw-r--r--arch/arm/boot/dts/imx6q-var-dt6customboard.dts2
-rw-r--r--arch/arm/boot/dts/imx6q-wandboard-revb1.dts6
-rw-r--r--arch/arm/boot/dts/imx6q-wandboard-revd1.dts6
-rw-r--r--arch/arm/boot/dts/imx6q-wandboard.dts6
-rw-r--r--arch/arm/boot/dts/imx6q.dtsi39
-rw-r--r--arch/arm/boot/dts/imx6qdl-apalis.dtsi2
-rw-r--r--arch/arm/boot/dts/imx6qdl-colibri.dtsi2
-rw-r--r--arch/arm/boot/dts/imx6qdl-gw5904.dtsi2
-rw-r--r--arch/arm/boot/dts/imx6qdl-hummingboard.dtsi52
-rw-r--r--arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi47
-rw-r--r--arch/arm/boot/dts/imx6qdl-icore.dtsi25
-rw-r--r--arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi2
-rw-r--r--arch/arm/boot/dts/imx6qdl-sabreauto.dtsi15
-rw-r--r--arch/arm/boot/dts/imx6qdl-sabrelite.dtsi3
-rw-r--r--arch/arm/boot/dts/imx6qdl-sabresd.dtsi18
-rw-r--r--arch/arm/boot/dts/imx6qdl-tx6-lcd.dtsi1
-rw-r--r--arch/arm/boot/dts/imx6qdl-tx6-mb7.dtsi3
-rw-r--r--arch/arm/boot/dts/imx6qdl-tx6.dtsi6
-rw-r--r--arch/arm/boot/dts/imx6qdl-udoo.dtsi6
-rw-r--r--arch/arm/boot/dts/imx6qdl-wandboard-revb1.dtsi1
-rw-r--r--arch/arm/boot/dts/imx6qdl-wandboard-revc1.dtsi1
-rw-r--r--arch/arm/boot/dts/imx6qdl-wandboard-revd1.dtsi1
-rw-r--r--arch/arm/boot/dts/imx6qdl-wandboard.dtsi14
-rw-r--r--arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi24
-rw-r--r--arch/arm/boot/dts/imx6qdl.dtsi70
-rw-r--r--arch/arm/boot/dts/imx6qp-sabreauto.dts44
-rw-r--r--arch/arm/boot/dts/imx6qp-sabresd.dts44
-rw-r--r--arch/arm/boot/dts/imx6qp-wandboard-revd1.dts6
-rw-r--r--arch/arm/boot/dts/imx6qp-zii-rdu2.dts5
-rw-r--r--arch/arm/boot/dts/imx6qp.dtsi44
-rw-r--r--arch/arm/boot/dts/imx6sl-evk.dts10
-rw-r--r--arch/arm/boot/dts/imx6sl.dtsi34
-rw-r--r--arch/arm/boot/dts/imx6sx-nitrogen6sx.dts4
-rw-r--r--arch/arm/boot/dts/imx6sx-sabreauto.dts427
-rw-r--r--arch/arm/boot/dts/imx6sx.dtsi101
-rw-r--r--arch/arm/boot/dts/imx6ul-14x14-evk.dts10
-rw-r--r--arch/arm/boot/dts/imx6ul-isiot.dtsi2
-rw-r--r--arch/arm/boot/dts/imx6ul-tx6ul-mainboard.dts2
-rw-r--r--arch/arm/boot/dts/imx6ul-tx6ul.dtsi6
-rw-r--r--arch/arm/boot/dts/imx6ul.dtsi51
-rw-r--r--arch/arm/boot/dts/imx6ull-pinfunc.h9
-rw-r--r--arch/arm/boot/dts/imx6ull.dtsi2
-rw-r--r--arch/arm/boot/dts/imx7d-cl-som-imx7.dts2
-rw-r--r--arch/arm/boot/dts/imx7d-nitrogen7.dts6
-rw-r--r--arch/arm/boot/dts/imx7d-pinfunc.h6
-rw-r--r--arch/arm/boot/dts/imx7d-sdb-sht11.dts44
-rw-r--r--arch/arm/boot/dts/imx7d-sdb.dts70
-rw-r--r--arch/arm/boot/dts/imx7d.dtsi71
-rw-r--r--arch/arm/boot/dts/imx7s-warp.dts4
-rw-r--r--arch/arm/boot/dts/imx7s.dtsi88
-rw-r--r--arch/arm/boot/dts/keystone-k2g-evm.dts26
-rw-r--r--arch/arm/boot/dts/logicpd-som-lv.dtsi34
-rw-r--r--arch/arm/boot/dts/logicpd-torpedo-som.dtsi10
-rw-r--r--arch/arm/boot/dts/meson8.dtsi33
-rw-r--r--arch/arm/boot/dts/meson8b-odroidc1.dts68
-rw-r--r--arch/arm/boot/dts/meson8b.dtsi24
-rw-r--r--arch/arm/boot/dts/meson8m2-mxiii-plus.dts244
-rw-r--r--arch/arm/boot/dts/meson8m2.dtsi54
-rw-r--r--arch/arm/boot/dts/mt2701-evb.dts9
-rw-r--r--arch/arm/boot/dts/mt2701.dtsi197
-rw-r--r--arch/arm/boot/dts/mt6323.dtsi17
-rw-r--r--arch/arm/boot/dts/mt6580-evbp1.dts9
-rw-r--r--arch/arm/boot/dts/mt6580.dtsi9
-rw-r--r--arch/arm/boot/dts/mt6589-aquaris5.dts10
-rw-r--r--arch/arm/boot/dts/mt6589.dtsi12
-rw-r--r--arch/arm/boot/dts/mt6592-evb.dts9
-rw-r--r--arch/arm/boot/dts/mt6592.dtsi9
-rw-r--r--arch/arm/boot/dts/mt7623.dtsi537
-rw-r--r--arch/arm/boot/dts/mt7623a-rfb-emmc.dts291
-rw-r--r--arch/arm/boot/dts/mt7623a-rfb-nand.dts337
-rw-r--r--arch/arm/boot/dts/mt7623a.dtsi44
-rw-r--r--arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts279
-rw-r--r--arch/arm/boot/dts/mt7623n-rfb-emmc.dts326
-rw-r--r--arch/arm/boot/dts/mt7623n-rfb-nand.dts40
-rw-r--r--arch/arm/boot/dts/mt7623n-rfb.dtsi12
-rw-r--r--arch/arm/boot/dts/mt8127-moose.dts9
-rw-r--r--arch/arm/boot/dts/mt8127.dtsi9
-rw-r--r--arch/arm/boot/dts/mt8135-evbp1.dts9
-rw-r--r--arch/arm/boot/dts/mt8135.dtsi9
-rw-r--r--arch/arm/boot/dts/omap2420-n810.dts63
-rw-r--r--arch/arm/boot/dts/omap3-beagle-xm.dts10
-rw-r--r--arch/arm/boot/dts/omap3-cm-t3x.dtsi2
-rw-r--r--arch/arm/boot/dts/omap3-devkit8000-common.dtsi9
-rw-r--r--arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi5
-rw-r--r--arch/arm/boot/dts/omap3-gta04.dtsi10
-rw-r--r--arch/arm/boot/dts/omap3-pandora-common.dtsi12
-rw-r--r--arch/arm/boot/dts/omap3-sb-t35.dtsi2
-rw-r--r--arch/arm/boot/dts/pxa3xx.dtsi20
-rw-r--r--arch/arm/boot/dts/qcom-apq8064.dtsi58
-rw-r--r--arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi10
-rw-r--r--arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts19
-rw-r--r--arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c3.dts9
-rw-r--r--arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi111
-rw-r--r--arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts64
-rw-r--r--arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c2.dts25
-rw-r--r--arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi75
-rw-r--r--arch/arm/boot/dts/qcom-ipq4019.dtsi178
-rw-r--r--arch/arm/boot/dts/qcom-msm8660.dtsi2
-rw-r--r--arch/arm/boot/dts/qcom-msm8974-sony-xperia-amami.dts436
-rw-r--r--arch/arm/boot/dts/qcom-pm8941.dtsi6
-rw-r--r--arch/arm/boot/dts/rk3036.dtsi2
-rw-r--r--arch/arm/boot/dts/rk322x.dtsi8
-rw-r--r--arch/arm/boot/dts/rk3288-phycore-som.dtsi1
-rw-r--r--arch/arm/boot/dts/rk3288-tinker.dts4
-rw-r--r--arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi3
-rw-r--r--arch/arm/boot/dts/rk3288-veyron-minnie.dts2
-rw-r--r--arch/arm/boot/dts/rk3288.dtsi20
-rw-r--r--arch/arm/boot/dts/s3c2416-smdk2416.dts5
-rw-r--r--arch/arm/boot/dts/s3c2416.dtsi11
-rw-r--r--arch/arm/boot/dts/s3c24xx.dtsi4
-rw-r--r--arch/arm/boot/dts/s3c6410-mini6410.dts3
-rw-r--r--arch/arm/boot/dts/s3c6410-smdk6410.dts3
-rw-r--r--arch/arm/boot/dts/s3c64xx.dtsi4
-rw-r--r--arch/arm/boot/dts/ste-ccu8540-pinctrl.dtsi196
-rw-r--r--arch/arm/boot/dts/ste-ccu8540.dts94
-rw-r--r--arch/arm/boot/dts/ste-ccu9540.dts79
-rw-r--r--arch/arm/boot/dts/ste-snowball.dts10
-rw-r--r--arch/arm/boot/dts/stih407-family.dtsi52
-rw-r--r--arch/arm/boot/dts/stih407-pinctrl.dtsi10
-rw-r--r--arch/arm/boot/dts/stih407.dtsi2
-rw-r--r--arch/arm/boot/dts/stih410.dtsi18
-rw-r--r--arch/arm/boot/dts/stihxxx-b2120.dtsi4
-rw-r--r--arch/arm/boot/dts/stm32f469-disco.dts53
-rw-r--r--arch/arm/boot/dts/stm32f469.dtsi19
-rw-r--r--arch/arm/boot/dts/stm32f746-disco.dts8
-rw-r--r--arch/arm/boot/dts/stm32f746.dtsi36
-rw-r--r--arch/arm/boot/dts/stm32f769-disco.dts8
-rw-r--r--arch/arm/boot/dts/stm32h743-pinctrl.dtsi10
-rw-r--r--arch/arm/boot/dts/stm32h743.dtsi53
-rw-r--r--arch/arm/boot/dts/stm32h743i-eval.dts8
-rw-r--r--arch/arm/boot/dts/stm32mp157-pinctrl.dtsi151
-rw-r--r--arch/arm/boot/dts/stm32mp157c-ed1.dts57
-rw-r--r--arch/arm/boot/dts/stm32mp157c-ev1.dts87
-rw-r--r--arch/arm/boot/dts/stm32mp157c.dtsi720
-rw-r--r--arch/arm/boot/dts/sun7i-a20-olimex-som-evb-emmc.dts37
-rw-r--r--arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts3
-rw-r--r--arch/arm/boot/dts/sun8i-a23-a33.dtsi33
-rw-r--r--arch/arm/boot/dts/sun8i-a33.dtsi44
-rw-r--r--arch/arm/boot/dts/sun8i-a83t.dtsi64
-rw-r--r--arch/arm/boot/dts/sun8i-h2-plus-libretech-all-h3-cc.dts13
-rw-r--r--arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts21
-rw-r--r--arch/arm/boot/dts/sun8i-h3-libretech-all-h3-cc.dts206
-rw-r--r--arch/arm/boot/dts/sun8i-h3-orangepi-one.dts21
-rw-r--r--arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts28
-rw-r--r--arch/arm/boot/dts/sun8i-h3.dtsi32
-rw-r--r--arch/arm/boot/dts/sun8i-r16-nintendo-nes-classic.dts56
-rw-r--r--arch/arm/boot/dts/sun8i-r16-nintendo-super-nes-classic.dts11
-rw-r--r--arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts99
-rw-r--r--arch/arm/boot/dts/sun8i-r40.dtsi34
-rw-r--r--arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts10
-rw-r--r--arch/arm/boot/dts/sunxi-h3-h5.dtsi18
-rw-r--r--arch/arm/boot/dts/sunxi-libretech-all-h3-cc.dtsi215
-rw-r--r--arch/arm/boot/dts/tegra114.dtsi5
-rw-r--r--arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi6
-rw-r--r--arch/arm/boot/dts/tegra124-apalis.dtsi6
-rw-r--r--arch/arm/boot/dts/tegra30.dtsi14
-rw-r--r--arch/arm/boot/dts/uniphier-pro4.dtsi10
-rw-r--r--arch/arm/boot/dts/uniphier-pxs2.dtsi3
-rw-r--r--arch/arm/boot/dts/vexpress-v2m-rs1.dtsi712
-rw-r--r--arch/arm/boot/dts/vexpress-v2m.dtsi710
-rw-r--r--arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts3
-rw-r--r--arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts9
-rw-r--r--arch/arm/boot/dts/vexpress-v2p-ca5s.dts5
-rw-r--r--arch/arm/boot/dts/vexpress-v2p-ca9.dts5
-rw-r--r--arch/arm/boot/dts/vf-colibri-eval-v3.dtsi2
-rw-r--r--arch/arm/boot/dts/vf610-zii-dev-rev-b.dts6
-rw-r--r--arch/arm/boot/dts/vf610-zii-dev-rev-c.dts4
-rw-r--r--arch/arm/boot/dts/vf610-zii-dev.dtsi4
-rw-r--r--arch/arm/boot/dts/vfxxx.dtsi2
-rw-r--r--arch/arm/mach-meson/Kconfig9
-rw-r--r--arch/arm/mach-meson/meson.c1
-rw-r--r--arch/arm64/boot/dts/Makefile1
-rw-r--r--arch/arm64/boot/dts/allwinner/Makefile5
-rw-r--r--arch/arm64/boot/dts/allwinner/axp803.dtsi5
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts21
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h3-cc.dts14
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi2
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts10
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi70
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-axg-s400.dts106
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-axg.dtsi453
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi12
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-gxl.dtsi16
-rw-r--r--arch/arm64/boot/dts/arm/juno-base.dtsi15
-rw-r--r--arch/arm64/boot/dts/arm/juno-motherboard.dtsi18
-rw-r--r--arch/arm64/boot/dts/arm/juno-r1.dts8
-rw-r--r--arch/arm64/boot/dts/arm/juno-r2.dts8
-rw-r--r--arch/arm64/boot/dts/arm/juno.dts4
-rw-r--r--arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts4
-rw-r--r--arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi453
-rw-r--r--arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts5
-rw-r--r--arch/arm64/boot/dts/broadcom/Makefile3
-rw-r--r--arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b-plus.dts2
-rw-r--r--arch/arm64/boot/dts/exynos/exynos5433.dtsi80
-rw-r--r--arch/arm64/boot/dts/exynos/exynos7.dtsi18
-rw-r--r--arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi10
-rw-r--r--arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi2
-rw-r--r--arch/arm64/boot/dts/hisilicon/hi3660.dtsi147
-rw-r--r--arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts38
-rw-r--r--arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi205
-rw-r--r--arch/arm64/boot/dts/hisilicon/hip06-d03.dts8
-rw-r--r--arch/arm64/boot/dts/hisilicon/hip06.dtsi21
-rw-r--r--arch/arm64/boot/dts/hisilicon/hip07-d05.dts4
-rw-r--r--arch/arm64/boot/dts/hisilicon/hip07.dtsi14
-rw-r--r--arch/arm64/boot/dts/hisilicon/poplar-pinctrl.dtsi98
-rw-r--r--arch/arm64/boot/dts/marvell/Makefile4
-rw-r--r--arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts27
-rw-r--r--arch/arm64/boot/dts/marvell/armada-37xx.dtsi6
-rw-r--r--arch/arm64/boot/dts/marvell/armada-7040-db.dts5
-rw-r--r--arch/arm64/boot/dts/marvell/armada-8040-db.dts10
-rw-r--r--arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts70
-rw-r--r--arch/arm64/boot/dts/marvell/armada-cp110.dtsi1
-rw-r--r--arch/arm64/boot/dts/marvell/berlin4ct-dmp.dts66
-rw-r--r--arch/arm64/boot/dts/marvell/berlin4ct-stb.dts66
-rw-r--r--arch/arm64/boot/dts/mediatek/mt2712-pinfunc.h1123
-rw-r--r--arch/arm64/boot/dts/mediatek/mt2712e.dtsi46
-rw-r--r--arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts11
-rw-r--r--arch/arm64/boot/dts/mediatek/mt7622.dtsi99
-rw-r--r--arch/arm64/boot/dts/qcom/Makefile1
-rw-r--r--arch/arm64/boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi2
-rw-r--r--arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi32
-rw-r--r--arch/arm64/boot/dts/qcom/ipq8074-hk01.dts62
-rw-r--r--arch/arm64/boot/dts/qcom/ipq8074.dtsi313
-rw-r--r--arch/arm64/boot/dts/qcom/msm8916.dtsi18
-rw-r--r--arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts17
-rw-r--r--arch/arm64/boot/dts/qcom/msm8992-pins.dtsi60
-rw-r--r--arch/arm64/boot/dts/qcom/msm8992.dtsi87
-rw-r--r--arch/arm64/boot/dts/qcom/msm8994-smd-rpm.dtsi276
-rw-r--r--arch/arm64/boot/dts/qcom/msm8996.dtsi110
-rw-r--r--arch/arm64/boot/dts/qcom/sdm845-mtp.dts15
-rw-r--r--arch/arm64/boot/dts/qcom/sdm845.dtsi327
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3328.dtsi10
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3368.dtsi10
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3399-firefly.dts8
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts4
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi8
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts25
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi4
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts12
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi23
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3399.dtsi36
-rw-r--r--arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi5
-rw-r--r--arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi3
-rw-r--r--arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi8
-rw-r--r--arch/arm64/boot/dts/sprd/sc2731.dtsi11
-rw-r--r--arch/arm64/boot/dts/sprd/sc9860.dtsi32
-rw-r--r--arch/arm64/boot/dts/sprd/whale2.dtsi55
-rw-r--r--arch/arm64/boot/dts/synaptics/Makefile4
-rw-r--r--arch/arm64/boot/dts/synaptics/berlin4ct-dmp.dts29
-rw-r--r--arch/arm64/boot/dts/synaptics/berlin4ct-stb.dts29
-rw-r--r--arch/arm64/boot/dts/synaptics/berlin4ct.dtsi (renamed from arch/arm64/boot/dts/marvell/berlin4ct.dtsi)39
483 files changed, 16879 insertions, 6130 deletions
diff --git a/Documentation/arm/OMAP/README b/Documentation/arm/OMAP/README
index 75645c45d14a..90c6c57d61e8 100644
--- a/Documentation/arm/OMAP/README
+++ b/Documentation/arm/OMAP/README
@@ -5,3 +5,7 @@ KERNEL NEW DEPENDENCIES
v4.3+ Update is needed for custom .config files to make sure
CONFIG_REGULATOR_PBIAS is enabled for MMC1 to work
properly.
+
+v4.18+ Update is needed for custom .config files to make sure
+ CONFIG_MMC_SDHCI_OMAP is enabled for all MMC instances
+ to work in DRA7 and K2G based boards.
diff --git a/Documentation/devicetree/bindings/arm/amlogic.txt b/Documentation/devicetree/bindings/arm/amlogic.txt
index f747f47922c5..69880560c0f0 100644
--- a/Documentation/devicetree/bindings/arm/amlogic.txt
+++ b/Documentation/devicetree/bindings/arm/amlogic.txt
@@ -25,6 +25,10 @@ Boards with the Amlogic Meson8b SoC shall have the following properties:
Required root node property:
compatible: "amlogic,meson8b";
+Boards with the Amlogic Meson8m2 SoC shall have the following properties:
+ Required root node property:
+ compatible: "amlogic,meson8m2";
+
Boards with the Amlogic Meson GXBaby SoC shall have the following properties:
Required root node property:
compatible: "amlogic,meson-gxbb";
@@ -54,6 +58,8 @@ Board compatible values (alphabetically, grouped by SoC):
- "hardkernel,odroid-c1" (Meson8b)
- "tronfy,mxq" (Meson8b)
+ - "tronsmart,mxiii-plus" (Meson8m2)
+
- "amlogic,p200" (Meson gxbb)
- "amlogic,p201" (Meson gxbb)
- "friendlyarm,nanopi-k2" (Meson gxbb)
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm2835.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm2835.txt
index 3e3efa046ac5..1e3e29a545e2 100644
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm2835.txt
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm2835.txt
@@ -34,6 +34,10 @@ Raspberry Pi 3 Model B
Required root node properties:
compatible = "raspberrypi,3-model-b", "brcm,bcm2837";
+Raspberry Pi 3 Model B+
+Required root node properties:
+compatible = "raspberrypi,3-model-b-plus", "brcm,bcm2837";
+
Raspberry Pi Compute Module
Required root node properties:
compatible = "raspberrypi,compute-module", "brcm,bcm2835";
diff --git a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
index 14510b215480..bdadc3da9556 100644
--- a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
+++ b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
@@ -21,8 +21,6 @@ Required root node properties:
- "samsung,smdk5420" - for Exynos5420-based Samsung SMDK5420 eval board.
- "samsung,tm2" - for Exynos5433-based Samsung TM2 board.
- "samsung,tm2e" - for Exynos5433-based Samsung TM2E board.
- - "samsung,sd5v1" - for Exynos5440-based Samsung board.
- - "samsung,ssdk5440" - for Exynos5440-based Samsung board.
* Other companies Exynos SoC based
* FriendlyARM
diff --git a/Documentation/devicetree/bindings/arm/shmobile.txt b/Documentation/devicetree/bindings/arm/shmobile.txt
index 86ac320323a7..d8cf740132c6 100644
--- a/Documentation/devicetree/bindings/arm/shmobile.txt
+++ b/Documentation/devicetree/bindings/arm/shmobile.txt
@@ -47,6 +47,8 @@ SoCs:
compatible = "renesas,r8a77970"
- R-Car V3H (R8A77980)
compatible = "renesas,r8a77980"
+ - R-Car E3 (R8A77990)
+ compatible = "renesas,r8a77990"
- R-Car D3 (R8A77995)
compatible = "renesas,r8a77995"
@@ -69,6 +71,8 @@ Boards:
compatible = "renesas,draak", "renesas,r8a77995"
- Eagle (RTP0RC77970SEB0010S)
compatible = "renesas,eagle", "renesas,r8a77970"
+ - Ebisu (RTP0RC77990SEB0010S)
+ compatible = "renesas,ebisu", "renesas,r8a77990"
- Genmai (RTK772100BC00000BR)
compatible = "renesas,genmai", "renesas,r7s72100"
- GR-Peach (X28A-M01-E/F)
@@ -80,6 +84,8 @@ Boards:
compatible = "renesas,h3ulcb", "renesas,r8a7795"
- Henninger
compatible = "renesas,henninger", "renesas,r8a7791"
+ - iWave Systems RZ/G1C Single Board Computer (iW-RainboW-G23S)
+ compatible = "iwave,g23s", "renesas,r8a77470"
- iWave Systems RZ/G1E SODIMM SOM Development Platform (iW-RainboW-G22D)
compatible = "iwave,g22d", "iwave,g22m", "renesas,r8a7745"
- iWave Systems RZ/G1E SODIMM System On Module (iW-RainboW-G22M-SM)
@@ -110,7 +116,7 @@ Boards:
compatible = "renesas,salvator-x", "renesas,r8a7795"
- Salvator-X (RTP0RC7796SIPB0011S)
compatible = "renesas,salvator-x", "renesas,r8a7796"
- - Salvator-X (RTP0RC7796SIPB0011S (M3N))
+ - Salvator-X (RTP0RC7796SIPB0011S (M3-N))
compatible = "renesas,salvator-x", "renesas,r8a77965"
- Salvator-XS (Salvator-X 2nd version, RTP0RC7795SIPB0012S)
compatible = "renesas,salvator-xs", "renesas,r8a7795"
@@ -126,6 +132,8 @@ Boards:
compatible = "renesas,sk-rzg1m", "renesas,r8a7743"
- Stout (ADAS Starterkit, Y-R-CAR-ADAS-SKH2-BOARD)
compatible = "renesas,stout", "renesas,r8a7790"
+ - V3HSK (Y-ASK-RCAR-V3H-WS10)
+ compatible = "renesas,v3hsk", "renesas,r8a77980"
- V3MSK (Y-ASK-RCAR-V3M-WS10)
compatible = "renesas,v3msk", "renesas,r8a77970"
- Wheat (RTP0RC7792ASKB0000JE)
diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra30-mc.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra30-mc.txt
deleted file mode 100644
index bdf1a612422b..000000000000
--- a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra30-mc.txt
+++ /dev/null
@@ -1,18 +0,0 @@
-NVIDIA Tegra30 MC(Memory Controller)
-
-Required properties:
-- compatible : "nvidia,tegra30-mc"
-- reg : Should contain 4 register ranges(address and length); see the
- example below. Note that the MC registers are interleaved with the
- SMMU registers, and hence must be represented as multiple ranges.
-- interrupts : Should contain MC General interrupt.
-
-Example:
- memory-controller {
- compatible = "nvidia,tegra30-mc";
- reg = <0x7000f000 0x010
- 0x7000f03c 0x1b4
- 0x7000f200 0x028
- 0x7000f284 0x17c>;
- interrupts = <0 77 0x04>;
- };
diff --git a/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt b/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt
index e2b377ed6f91..e950599566a9 100644
--- a/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt
+++ b/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt
@@ -10,9 +10,6 @@ Required Properties:
"amlogic,gxl-clkc" for GXL and GXM SoC,
"amlogic,axg-clkc" for AXG SoC.
-- reg: physical base address of the clock controller and length of memory
- mapped region.
-
- #clock-cells: should be 1.
Each clock is assigned an identifier and client nodes can use this identifier
@@ -20,13 +17,22 @@ to specify the clock which they consume. All available clocks are defined as
preprocessor macros in the dt-bindings/clock/gxbb-clkc.h header and can be
used in device tree sources.
+Parent node should have the following properties :
+- compatible: "syscon", "simple-mfd, and "amlogic,meson-gx-hhi-sysctrl" or
+ "amlogic,meson-axg-hhi-sysctrl"
+- reg: base address and size of the HHI system control register space.
+
Example: Clock controller node:
- clkc: clock-controller@c883c000 {
+sysctrl: system-controller@0 {
+ compatible = "amlogic,meson-gx-hhi-sysctrl", "syscon", "simple-mfd";
+ reg = <0 0 0 0x400>;
+
+ clkc: clock-controller {
#clock-cells = <1>;
compatible = "amlogic,gxbb-clkc";
- reg = <0x0 0xc883c000 0x0 0x3db>;
};
+};
Example: UART controller node that consumes the clock generated by the clock
controller:
diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-mc.txt b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-mc.txt
index f9632bacbd04..7d60a50a4fa1 100644
--- a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-mc.txt
+++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-mc.txt
@@ -6,11 +6,21 @@ Required properties:
example below. Note that the MC registers are interleaved with the
GART registers, and hence must be represented as multiple ranges.
- interrupts : Should contain MC General interrupt.
+- #reset-cells : Should be 1. This cell represents memory client module ID.
+ The assignments may be found in header file <dt-bindings/memory/tegra20-mc.h>
+ or in the TRM documentation.
Example:
- memory-controller@7000f000 {
+ mc: memory-controller@7000f000 {
compatible = "nvidia,tegra20-mc";
reg = <0x7000f000 0x024
0x7000f03c 0x3c4>;
interrupts = <0 77 0x04>;
+ #reset-cells = <1>;
+ };
+
+ video-codec@6001a000 {
+ compatible = "nvidia,tegra20-vde";
+ ...
+ resets = <&mc TEGRA20_MC_RESET_VDE>;
};
diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-mc.txt b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-mc.txt
index 14968b048cd3..a878b5908a4d 100644
--- a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-mc.txt
+++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-mc.txt
@@ -12,6 +12,9 @@ Required properties:
- clock-names: Must include the following entries:
- mc: the module's clock input
- interrupts: The interrupt outputs from the controller.
+- #reset-cells : Should be 1. This cell represents memory client module ID.
+ The assignments may be found in header file <dt-bindings/memory/tegra30-mc.h>
+ or in the TRM documentation.
Required properties for Tegra30, Tegra114, Tegra124, Tegra132 and Tegra210:
- #iommu-cells: Should be 1. The single cell of the IOMMU specifier defines
@@ -72,12 +75,14 @@ Example SoC include file:
interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
#iommu-cells = <1>;
+ #reset-cells = <1>;
};
sdhci@700b0000 {
compatible = "nvidia,tegra124-sdhci";
...
iommus = <&mc TEGRA_SWGROUP_SDMMC1A>;
+ resets = <&mc TEGRA124_MC_RESET_SDMMC1>;
};
};
diff --git a/Documentation/devicetree/bindings/nvmem/allwinner,sunxi-sid.txt b/Documentation/devicetree/bindings/nvmem/allwinner,sunxi-sid.txt
index d69543701d5d..e319fe5e205a 100644
--- a/Documentation/devicetree/bindings/nvmem/allwinner,sunxi-sid.txt
+++ b/Documentation/devicetree/bindings/nvmem/allwinner,sunxi-sid.txt
@@ -4,6 +4,7 @@ Required properties:
- compatible: Should be one of the following:
"allwinner,sun4i-a10-sid"
"allwinner,sun7i-a20-sid"
+ "allwinner,sun8i-a83t-sid"
"allwinner,sun8i-h3-sid"
"allwinner,sun50i-a64-sid"
diff --git a/Documentation/devicetree/bindings/reserved-memory/qcom,cmd-db.txt b/Documentation/devicetree/bindings/reserved-memory/qcom,cmd-db.txt
new file mode 100644
index 000000000000..68395530c0a5
--- /dev/null
+++ b/Documentation/devicetree/bindings/reserved-memory/qcom,cmd-db.txt
@@ -0,0 +1,37 @@
+Command DB
+---------
+
+Command DB is a database that provides a mapping between resource key and the
+resource address for a system resource managed by a remote processor. The data
+is stored in a shared memory region and is loaded by the remote processor.
+
+Some of the Qualcomm Technologies Inc SoC's have hardware accelerators for
+controlling shared resources. Depending on the board configuration the shared
+resource properties may change. These properties are dynamically probed by the
+remote processor and made available in the shared memory.
+
+The bindings for Command DB is specified in the reserved-memory section in
+devicetree. The devicetree representation of the command DB driver should be:
+
+Properties:
+- compatible:
+ Usage: required
+ Value type: <string>
+ Definition: Should be "qcom,cmd-db"
+
+- reg:
+ Usage: required
+ Value type: <prop encoded array>
+ Definition: The register address that points to the actual location of
+ the Command DB in memory.
+
+Example:
+
+ reserved-memory {
+ [...]
+ reserved-memory@85fe0000 {
+ reg = <0x0 0x85fe0000 0x0 0x20000>;
+ compatible = "qcom,cmd-db";
+ no-map;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/rng/brcm,bcm2835.txt b/Documentation/devicetree/bindings/rng/brcm,bcm2835.txt
index 627b29531a32..aaac7975f61c 100644
--- a/Documentation/devicetree/bindings/rng/brcm,bcm2835.txt
+++ b/Documentation/devicetree/bindings/rng/brcm,bcm2835.txt
@@ -14,11 +14,16 @@ Optional properties:
- clocks : phandle to clock-controller plus clock-specifier pair
- clock-names : "ipsec" as a clock name
+Optional properties:
+
+- interrupts: specify the interrupt for the RNG block
+
Example:
rng {
- compatible = "brcm,bcm2835-rng";
- reg = <0x7e104000 0x10>;
+ compatible = "brcm,bcm2835-rng";
+ reg = <0x7e104000 0x10>;
+ interrupts = <2 29>;
};
rng@18033000 {
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt
new file mode 100644
index 000000000000..d330c73de9a2
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt
@@ -0,0 +1,119 @@
+Qualcomm Technologies, Inc. GENI Serial Engine QUP Wrapper Controller
+
+Generic Interface (GENI) based Qualcomm Universal Peripheral (QUP) wrapper
+is a programmable module for supporting a wide range of serial interfaces
+like UART, SPI, I2C, I3C, etc. A single QUP module can provide upto 8 Serial
+Interfaces, using its internal Serial Engines. The GENI Serial Engine QUP
+Wrapper controller is modeled as a node with zero or more child nodes each
+representing a serial engine.
+
+Required properties:
+- compatible: Must be "qcom,geni-se-qup".
+- reg: Must contain QUP register address and length.
+- clock-names: Must contain "m-ahb" and "s-ahb".
+- clocks: AHB clocks needed by the device.
+
+Required properties if child node exists:
+- #address-cells: Must be <1> for Serial Engine Address
+- #size-cells: Must be <1> for Serial Engine Address Size
+- ranges: Must be present
+
+Properties for children:
+
+A GENI based QUP wrapper controller node can contain 0 or more child nodes
+representing serial devices. These serial devices can be a QCOM UART, I2C
+controller, SPI controller, or some combination of aforementioned devices.
+Please refer below the child node definitions for the supported serial
+interface protocols.
+
+Qualcomm Technologies Inc. GENI Serial Engine based I2C Controller
+
+Required properties:
+- compatible: Must be "qcom,geni-i2c".
+- reg: Must contain QUP register address and length.
+- interrupts: Must contain I2C interrupt.
+- clock-names: Must contain "se".
+- clocks: Serial engine core clock needed by the device.
+- #address-cells: Must be <1> for I2C device address.
+- #size-cells: Must be <0> as I2C addresses have no size component.
+
+Optional property:
+- clock-frequency: Desired I2C bus clock frequency in Hz.
+ When missing default to 400000Hz.
+
+Child nodes should conform to I2C bus binding as described in i2c.txt.
+
+Qualcomm Technologies Inc. GENI Serial Engine based UART Controller
+
+Required properties:
+- compatible: Must be "qcom,geni-debug-uart".
+- reg: Must contain UART register location and length.
+- interrupts: Must contain UART core interrupts.
+- clock-names: Must contain "se".
+- clocks: Serial engine core clock needed by the device.
+
+Qualcomm Technologies Inc. GENI Serial Engine based SPI Controller
+
+Required properties:
+- compatible: Must contain "qcom,geni-spi".
+- reg: Must contain SPI register location and length.
+- interrupts: Must contain SPI controller interrupts.
+- clock-names: Must contain "se".
+- clocks: Serial engine core clock needed by the device.
+- spi-max-frequency: Specifies maximum SPI clock frequency, units - Hz.
+- #address-cells: Must be <1> to define a chip select address on
+ the SPI bus.
+- #size-cells: Must be <0>.
+
+SPI slave nodes must be children of the SPI master node and conform to SPI bus
+binding as described in Documentation/devicetree/bindings/spi/spi-bus.txt.
+
+Example:
+ geniqup@8c0000 {
+ compatible = "qcom,geni-se-qup";
+ reg = <0x8c0000 0x6000>;
+ clock-names = "m-ahb", "s-ahb";
+ clocks = <&clock_gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+ <&clock_gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ i2c0: i2c@a94000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0xa94000 0x4000>;
+ interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "se";
+ clocks = <&clock_gcc GCC_QUPV3_WRAP0_S5_CLK>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&qup_1_i2c_5_active>;
+ pinctrl-1 = <&qup_1_i2c_5_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ uart0: serial@a88000 {
+ compatible = "qcom,geni-debug-uart";
+ reg = <0xa88000 0x7000>;
+ interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "se";
+ clocks = <&clock_gcc GCC_QUPV3_WRAP0_S0_CLK>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&qup_1_uart_3_active>;
+ pinctrl-1 = <&qup_1_uart_3_sleep>;
+ };
+
+ spi0: spi@a84000 {
+ compatible = "qcom,geni-spi";
+ reg = <0xa84000 0x4000>;
+ interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "se";
+ clocks = <&clock_gcc GCC_QUPV3_WRAP0_S0_CLK>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&qup_1_spi_2_active>;
+ pinctrl-1 = <&qup_1_spi_2_sleep>;
+ spi-max-frequency = <19200000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ }
diff --git a/Documentation/devicetree/bindings/timer/renesas,cmt.txt b/Documentation/devicetree/bindings/timer/renesas,cmt.txt
index d740989eb569..b40add2d9bb4 100644
--- a/Documentation/devicetree/bindings/timer/renesas,cmt.txt
+++ b/Documentation/devicetree/bindings/timer/renesas,cmt.txt
@@ -22,6 +22,10 @@ Required Properties:
- "renesas,r8a73a4-cmt0" for the 32-bit CMT0 device included in r8a73a4.
- "renesas,r8a73a4-cmt1" for the 48-bit CMT1 device included in r8a73a4.
+ - "renesas,r8a7743-cmt0" for the 32-bit CMT0 device included in r8a7743.
+ - "renesas,r8a7743-cmt1" for the 48-bit CMT1 device included in r8a7743.
+ - "renesas,r8a7745-cmt0" for the 32-bit CMT0 device included in r8a7745.
+ - "renesas,r8a7745-cmt1" for the 48-bit CMT1 device included in r8a7745.
- "renesas,r8a7790-cmt0" for the 32-bit CMT0 device included in r8a7790.
- "renesas,r8a7790-cmt1" for the 48-bit CMT1 device included in r8a7790.
- "renesas,r8a7791-cmt0" for the 32-bit CMT0 device included in r8a7791.
@@ -31,10 +35,12 @@ Required Properties:
- "renesas,r8a7794-cmt0" for the 32-bit CMT0 device included in r8a7794.
- "renesas,r8a7794-cmt1" for the 48-bit CMT1 device included in r8a7794.
- - "renesas,rcar-gen2-cmt0" for 32-bit CMT0 devices included in R-Car Gen2.
- - "renesas,rcar-gen2-cmt1" for 48-bit CMT1 devices included in R-Car Gen2.
- These are fallbacks for r8a73a4 and all the R-Car Gen2
- entries listed above.
+ - "renesas,rcar-gen2-cmt0" for 32-bit CMT0 devices included in R-Car Gen2
+ and RZ/G1.
+ - "renesas,rcar-gen2-cmt1" for 48-bit CMT1 devices included in R-Car Gen2
+ and RZ/G1.
+ These are fallbacks for r8a73a4, R-Car Gen2 and RZ/G1 entries
+ listed above.
- reg: base address and length of the registers block for the timer module.
- interrupts: interrupt-specifier for the timer, one per channel.
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 4b38f3373f43..7cad066191ee 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -58,6 +58,7 @@ bosch Bosch Sensortec GmbH
boundary Boundary Devices Inc.
brcm Broadcom Corporation
buffalo Buffalo, Inc.
+bticino Bticino International
calxeda Calxeda
capella Capella Microsystems, Inc
cascoda Cascoda, Ltd.
@@ -285,6 +286,7 @@ pine64 Pine64
pixcir PIXCIR MICROELECTRONICS Co., Ltd
plathome Plat'Home Co., Ltd.
plda PLDA
+portwell Portwell Inc.
poslab Poslab Technology Co., Ltd.
powervr PowerVR (deprecated, use img)
probox2 PROBOX2 (by W2COMP Co., Ltd.)
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 7e2424957809..19124f0efe60 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -75,6 +75,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += \
bcm2835-rpi-a-plus.dtb \
bcm2836-rpi-2-b.dtb \
bcm2837-rpi-3-b.dtb \
+ bcm2837-rpi-3-b-plus.dtb \
bcm2835-rpi-zero.dtb \
bcm2835-rpi-zero-w.dtb
dtb-$(CONFIG_ARCH_BCM_5301X) += \
@@ -102,8 +103,10 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
bcm47094-dlink-dir-885l.dtb \
bcm47094-linksys-panamera.dtb \
bcm47094-luxul-abr-4500.dtb \
+ bcm47094-luxul-xap-1610.dtb \
bcm47094-luxul-xbr-4500.dtb \
bcm47094-luxul-xwr-3100.dtb \
+ bcm47094-luxul-xwr-3150-v1.dtb \
bcm47094-netgear-r8500.dtb \
bcm94708.dtb \
bcm94709.dtb \
@@ -140,6 +143,7 @@ dtb-$(CONFIG_ARCH_BCM_NSP) += \
dtb-$(CONFIG_ARCH_BERLIN) += \
berlin2-sony-nsz-gs7.dtb \
berlin2cd-google-chromecast.dtb \
+ berlin2cd-valve-steamlink.dtb \
berlin2q-marvell-dmp.dtb
dtb-$(CONFIG_ARCH_BRCMSTB) += \
bcm7445-bcm97445svmb.dtb
@@ -190,8 +194,6 @@ dtb-$(CONFIG_ARCH_EXYNOS5) += \
exynos5422-odroidxu3.dtb \
exynos5422-odroidxu3-lite.dtb \
exynos5422-odroidxu4.dtb \
- exynos5440-sd5v1.dtb \
- exynos5440-ssdk5440.dtb \
exynos5800-peach-pi.dtb
dtb-$(CONFIG_ARCH_GEMINI) += \
gemini-dlink-dir-685.dtb \
@@ -312,14 +314,14 @@ dtb-$(CONFIG_ARCH_NPCM7XX) += \
dtb-$(CONFIG_MACH_MESON6) += \
meson6-atv1200.dtb
dtb-$(CONFIG_MACH_MESON8) += \
- meson8-minix-neo-x8.dtb
+ meson8-minix-neo-x8.dtb \
+ meson8b-mxq.dtb \
+ meson8b-odroidc1.dtb \
+ meson8m2-mxiii-plus.dtb
dtb-$(CONFIG_ARCH_MMP) += \
pxa168-aspenite.dtb \
pxa910-dkb.dtb \
mmp2-brownstone.dtb
-dtb-$(CONFIG_MACH_MESON8B) += \
- meson8b-mxq.dtb \
- meson8b-odroidc1.dtb
dtb-$(CONFIG_ARCH_MPS2) += \
mps2-an385.dtb \
mps2-an399.dtb
@@ -399,6 +401,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
imx6dl-hummingboard2-som-v15.dtb \
imx6dl-icore.dtb \
imx6dl-icore-rqs.dtb \
+ imx6dl-mamoj.dtb \
imx6dl-nit6xlite.dtb \
imx6dl-nitrogen6x.dtb \
imx6dl-phytec-mira-rdk-nand.dtb \
@@ -439,6 +442,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
imx6q-cubox-i-emmc-som-v15.dtb \
imx6q-cubox-i-som-v15.dtb \
imx6q-dfi-fs700-m60.dtb \
+ imx6q-dhcom-pdk2.dtb \
imx6q-display5-tianma-tm070-1280x768.dtb \
imx6q-dmo-edmqmx6.dtb \
imx6q-dms-ba16.dtb \
@@ -463,9 +467,11 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
imx6q-hummingboard2-emmc-som-v15.dtb \
imx6q-hummingboard2-som-v15.dtb \
imx6q-icore.dtb \
+ imx6q-icore-mipi.dtb \
imx6q-icore-ofcap10.dtb \
imx6q-icore-ofcap12.dtb \
imx6q-icore-rqs.dtb \
+ imx6q-kp-tpc.dtb \
imx6q-marsboard.dtb \
imx6q-mccmon6.dtb \
imx6q-nitrogen6x.dtb \
@@ -688,6 +694,7 @@ dtb-$(CONFIG_SOC_AM33XX) += \
am335x-pdu001.dtb \
am335x-pepper.dtb \
am335x-phycore-rdk.dtb \
+ am335x-pocketbeagle.dtb \
am335x-shc.dtb \
am335x-sbc-t335.dtb \
am335x-sl50.dtb \
@@ -760,12 +767,17 @@ dtb-$(CONFIG_ARCH_QCOM) += \
qcom-apq8084-ifc6540.dtb \
qcom-apq8084-mtp.dtb \
qcom-ipq4019-ap.dk01.1-c1.dtb \
+ qcom-ipq4019-ap.dk04.1-c1.dtb \
+ qcom-ipq4019-ap.dk04.1-c3.dtb \
+ qcom-ipq4019-ap.dk07.1-c1.dtb \
+ qcom-ipq4019-ap.dk07.1-c2.dtb \
qcom-ipq8064-ap148.dtb \
qcom-msm8660-surf.dtb \
qcom-msm8960-cdp.dtb \
qcom-msm8974-fairphone-fp2.dtb \
qcom-msm8974-lge-nexus5-hammerhead.dtb \
qcom-msm8974-samsung-klte.dtb \
+ qcom-msm8974-sony-xperia-amami.dtb \
qcom-msm8974-sony-xperia-castor.dtb \
qcom-msm8974-sony-xperia-honami.dtb \
qcom-mdm9615-wp8548-mangoh-green.dtb
@@ -959,6 +971,7 @@ dtb-$(CONFIG_MACH_SUN7I) += \
sun7i-a20-m3.dtb \
sun7i-a20-mk808c.dtb \
sun7i-a20-olimex-som-evb.dtb \
+ sun7i-a20-olimex-som-evb-emmc.dtb \
sun7i-a20-olimex-som204-evb.dtb \
sun7i-a20-olimex-som204-evb-emmc.dtb \
sun7i-a20-olinuxino-lime.dtb \
@@ -992,8 +1005,9 @@ dtb-$(CONFIG_MACH_SUN8I) += \
sun8i-a83t-bananapi-m3.dtb \
sun8i-a83t-cubietruck-plus.dtb \
sun8i-a83t-tbs-a711.dtb \
- sun8i-h2-plus-orangepi-r1.dtb \
sun8i-h2-plus-bananapi-m2-zero.dtb \
+ sun8i-h2-plus-libretech-all-h3-cc.dtb \
+ sun8i-h2-plus-orangepi-r1.dtb \
sun8i-h2-plus-orangepi-zero.dtb \
sun8i-h3-bananapi-m2-plus.dtb \
sun8i-h3-beelink-x2.dtb \
@@ -1010,6 +1024,8 @@ dtb-$(CONFIG_MACH_SUN8I) += \
sun8i-h3-orangepi-plus.dtb \
sun8i-h3-orangepi-plus2e.dtb \
sun8i-r16-bananapi-m2m.dtb \
+ sun8i-r16-nintendo-nes-classic.dtb \
+ sun8i-r16-nintendo-super-nes-classic.dtb \
sun8i-r16-parrot.dtb \
sun8i-r40-bananapi-m2-ultra.dtb \
sun8i-v3s-licheepi-zero.dtb \
@@ -1054,9 +1070,7 @@ dtb-$(CONFIG_ARCH_U8500) += \
ste-hrefprev60-stuib.dtb \
ste-hrefprev60-tvk.dtb \
ste-hrefv60plus-stuib.dtb \
- ste-hrefv60plus-tvk.dtb \
- ste-ccu8540.dtb \
- ste-ccu9540.dtb
+ ste-hrefv60plus-tvk.dtb
dtb-$(CONFIG_ARCH_UNIPHIER) += \
uniphier-ld4-ref.dtb \
uniphier-ld6b-ref.dtb \
@@ -1150,6 +1164,9 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \
mt6580-evbp1.dtb \
mt6589-aquaris5.dtb \
mt6592-evb.dtb \
+ mt7623a-rfb-emmc.dtb \
+ mt7623a-rfb-nand.dtb \
+ mt7623n-rfb-emmc.dtb \
mt7623n-rfb-nand.dtb \
mt7623n-bananapi-bpi-r2.dtb \
mt8127-moose.dtb \
@@ -1158,8 +1175,11 @@ dtb-$(CONFIG_ARCH_ZX) += zx296702-ad1.dtb
dtb-$(CONFIG_ARCH_ASPEED) += \
aspeed-ast2500-evb.dtb \
aspeed-bmc-arm-centriq2400-rep.dtb \
+ aspeed-bmc-intel-s2600wf.dtb \
+ aspeed-bmc-opp-lanyang.dtb \
aspeed-bmc-opp-palmetto.dtb \
aspeed-bmc-opp-romulus.dtb \
aspeed-bmc-opp-witherspoon.dtb \
aspeed-bmc-opp-zaius.dtb \
+ aspeed-bmc-portwell-neptune.dtb \
aspeed-bmc-quanta-q71l.dtb
diff --git a/arch/arm/boot/dts/am335x-baltos-ir3220.dts b/arch/arm/boot/dts/am335x-baltos-ir3220.dts
index 46df1b22022c..1b215c425c57 100644
--- a/arch/arm/boot/dts/am335x-baltos-ir3220.dts
+++ b/arch/arm/boot/dts/am335x-baltos-ir3220.dts
@@ -85,7 +85,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-parent = <&gpio0>;
- interrupts = <20 GPIO_ACTIVE_LOW>;
+ interrupts = <20 IRQ_TYPE_EDGE_RISING>;
pinctrl-names = "default";
pinctrl-0 = <&tca6416_pins>;
};
diff --git a/arch/arm/boot/dts/am335x-baltos-ir5221.dts b/arch/arm/boot/dts/am335x-baltos-ir5221.dts
index 5d56355ba040..832ead864dc5 100644
--- a/arch/arm/boot/dts/am335x-baltos-ir5221.dts
+++ b/arch/arm/boot/dts/am335x-baltos-ir5221.dts
@@ -94,7 +94,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-parent = <&gpio0>;
- interrupts = <20 GPIO_ACTIVE_LOW>;
+ interrupts = <20 IRQ_TYPE_EDGE_RISING>;
pinctrl-names = "default";
pinctrl-0 = <&tca6416_pins>;
};
diff --git a/arch/arm/boot/dts/am335x-baltos.dtsi b/arch/arm/boot/dts/am335x-baltos.dtsi
index ec6052c521ef..ed7a5a3daa42 100644
--- a/arch/arm/boot/dts/am335x-baltos.dtsi
+++ b/arch/arm/boot/dts/am335x-baltos.dtsi
@@ -249,7 +249,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-parent = <&gpio1>;
- interrupts = <28 GPIO_ACTIVE_LOW>;
+ interrupts = <28 IRQ_TYPE_EDGE_RISING>;
pinctrl-names = "default";
pinctrl-0 = <&tps65910_pins>;
};
diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi
index e67b4d65c8d0..f9e8667f5886 100644
--- a/arch/arm/boot/dts/am335x-bone-common.dtsi
+++ b/arch/arm/boot/dts/am335x-bone-common.dtsi
@@ -161,7 +161,14 @@
mmc1_pins: pinmux_mmc1_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* GPIO0_6 */
+ AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spio0_cs1.gpio0_6 */
+ AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
+ AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
+ AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
+ AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
+ AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
+ AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk.mmc0_clk */
+ AM33XX_IOPAD(0x9a0, PIN_INPUT | MUX_MODE4) /* mcasp0_aclkr.mmc0_sdwp */
>;
};
diff --git a/arch/arm/boot/dts/am335x-boneblue.dts b/arch/arm/boot/dts/am335x-boneblue.dts
index 58baee158e64..7bcd72691f06 100644
--- a/arch/arm/boot/dts/am335x-boneblue.dts
+++ b/arch/arm/boot/dts/am335x-boneblue.dts
@@ -364,7 +364,7 @@
compatible = "invensense,mpu9250";
reg = <0x68>;
interrupt-parent = <&gpio3>;
- interrupts = <21 GPIO_ACTIVE_LOW>;
+ interrupts = <21 IRQ_TYPE_EDGE_RISING>;
i2c-gate {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index fee6b3ee1741..1356fd6f8da3 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -303,7 +303,14 @@
mmc1_pins: pinmux_mmc1_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+ AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+ AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
+ AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
+ AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
+ AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
+ AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
+ AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk.mmc0_clk */
+ AM33XX_IOPAD(0x9a0, PIN_INPUT | MUX_MODE4) /* mcasp0_aclkr.mmc0_sdwp */
>;
};
diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts
index fa608cd5dc14..0c096a795e37 100644
--- a/arch/arm/boot/dts/am335x-evmsk.dts
+++ b/arch/arm/boot/dts/am335x-evmsk.dts
@@ -137,7 +137,7 @@
};
};
- backlight {
+ lcd_bl: backlight {
compatible = "pwm-backlight";
pwms = <&ecap2 0 50000 PWM_POLARITY_INVERTED>;
brightness-levels = <0 58 61 66 75 90 125 170 255>;
@@ -172,6 +172,7 @@
pinctrl-names = "default", "sleep";
pinctrl-0 = <&lcd_pins_default>;
pinctrl-1 = <&lcd_pins_sleep>;
+ backlight = <&lcd_bl>;
status = "okay";
panel-info {
ac-bias = <255>;
@@ -399,7 +400,14 @@
mmc1_pins: pinmux_mmc1_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+ AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+ AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
+ AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
+ AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
+ AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
+ AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
+ AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk.mmc0_clk */
+ AM33XX_IOPAD(0x9a0, PIN_INPUT | MUX_MODE4) /* mcasp0_aclkr.mmc0_sdwp */
>;
};
diff --git a/arch/arm/boot/dts/am335x-osd335x-common.dtsi b/arch/arm/boot/dts/am335x-osd335x-common.dtsi
new file mode 100644
index 000000000000..f8ff473f94f0
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-osd335x-common.dtsi
@@ -0,0 +1,124 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * Author: Robert Nelson <robertcnelson@gmail.com>
+ */
+
+/ {
+ cpus {
+ cpu@0 {
+ cpu0-supply = <&dcdc2_reg>;
+ };
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x20000000>; /* 512 MB */
+ };
+};
+
+&cpu0_opp_table {
+ /*
+ * Octavo Systems:
+ * The EFUSE_SMA register is not programmed for any of the AM335x wafers
+ * we get and we are not programming them during our production test.
+ * Therefore, from a DEVICE_ID revision point of view, the silicon looks
+ * like it is Revision 2.1. However, from an EFUSE_SMA point of view for
+ * the HW OPP table, the silicon looks like it is Revision 1.0 (ie the
+ * EFUSE_SMA register reads as all zeros).
+ */
+ oppnitro-1000000000 {
+ opp-supported-hw = <0x06 0x0100>;
+ };
+};
+
+&am33xx_pinmux {
+ i2c0_pins: pinmux-i2c0-pins {
+ pinctrl-single,pins = <
+ AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* (C17) I2C0_SDA.I2C0_SDA */
+ AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* (C16) I2C0_SCL.I2C0_SCL */
+ >;
+ };
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+
+ status = "okay";
+ clock-frequency = <400000>;
+
+ tps: tps@24 {
+ reg = <0x24>;
+ };
+};
+
+/include/ "tps65217.dtsi"
+
+&tps {
+ interrupts = <7>; /* NMI */
+ interrupt-parent = <&intc>;
+
+ ti,pmic-shutdown-controller;
+
+ pwrbutton {
+ interrupts = <2>;
+ status = "okay";
+ };
+
+ regulators {
+ dcdc1_reg: regulator@0 {
+ regulator-name = "vdds_dpr";
+ regulator-always-on;
+ };
+
+ dcdc2_reg: regulator@1 {
+ /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
+ regulator-name = "vdd_mpu";
+ regulator-min-microvolt = <925000>;
+ regulator-max-microvolt = <1351500>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ dcdc3_reg: regulator@2 {
+ /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
+ regulator-name = "vdd_core";
+ regulator-min-microvolt = <925000>;
+ regulator-max-microvolt = <1150000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo1_reg: regulator@3 {
+ regulator-name = "vio,vrtc,vdds";
+ regulator-always-on;
+ };
+
+ ldo2_reg: regulator@4 {
+ regulator-name = "vdd_3v3aux";
+ regulator-always-on;
+ };
+
+ ldo3_reg: regulator@5 {
+ regulator-name = "vdd_1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo4_reg: regulator@6 {
+ regulator-name = "vdd_3v3a";
+ regulator-always-on;
+ };
+ };
+};
+
+&aes {
+ status = "okay";
+};
+
+&sham {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/am335x-pocketbeagle.dts b/arch/arm/boot/dts/am335x-pocketbeagle.dts
new file mode 100644
index 000000000000..62fe5cab9fae
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-pocketbeagle.dts
@@ -0,0 +1,237 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * Author: Robert Nelson <robertcnelson@gmail.com>
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include "am335x-osd335x-common.dtsi"
+
+/ {
+ model = "TI AM335x PocketBeagle";
+ compatible = "ti,am335x-pocketbeagle", "ti,am335x-bone", "ti,am33xx";
+
+ chosen {
+ stdout-path = &uart0;
+ };
+
+ leds {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usr_leds_pins>;
+
+ compatible = "gpio-leds";
+
+ usr0 {
+ label = "beaglebone:green:usr0";
+ gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ default-state = "off";
+ };
+
+ usr1 {
+ label = "beaglebone:green:usr1";
+ gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "mmc0";
+ default-state = "off";
+ };
+
+ usr2 {
+ label = "beaglebone:green:usr2";
+ gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "cpu0";
+ default-state = "off";
+ };
+
+ usr3 {
+ label = "beaglebone:green:usr3";
+ gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ };
+
+ vmmcsd_fixed: fixedregulator0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vmmcsd_fixed";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+};
+
+&am33xx_pinmux {
+ i2c2_pins: pinmux-i2c2-pins {
+ pinctrl-single,pins = <
+ AM33XX_IOPAD(0x97c, PIN_INPUT_PULLUP | MUX_MODE3) /* (D17) uart1_rtsn.I2C2_SCL */
+ AM33XX_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE3) /* (D18) uart1_ctsn.I2C2_SDA */
+ >;
+ };
+
+ ehrpwm0_pins: pinmux-ehrpwm0-pins {
+ pinctrl-single,pins = <
+ AM33XX_IOPAD(0x990, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* (A13) mcasp0_aclkx.ehrpwm0A */
+ >;
+ };
+
+ ehrpwm1_pins: pinmux-ehrpwm1-pins {
+ pinctrl-single,pins = <
+ AM33XX_IOPAD(0x848, PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* (U14) gpmc_a2.ehrpwm1A */
+ >;
+ };
+
+ mmc0_pins: pinmux-mmc0-pins {
+ pinctrl-single,pins = <
+ AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* (C15) spi0_cs1.gpio0[6] */
+ AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* (G16) mmc0_dat0.mmc0_dat0 */
+ AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* (G15) mmc0_dat1.mmc0_dat1 */
+ AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* (F18) mmc0_dat2.mmc0_dat2 */
+ AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* (F17) mmc0_dat3.mmc0_dat3 */
+ AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* (G18) mmc0_cmd.mmc0_cmd */
+ AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* (G17) mmc0_clk.mmc0_clk */
+ AM33XX_IOPAD(0x9a0, PIN_INPUT | MUX_MODE4) /* (B12) mcasp0_aclkr.mmc0_sdwp */
+ >;
+ };
+
+ spi0_pins: pinmux-spi0-pins {
+ pinctrl-single,pins = <
+ AM33XX_IOPAD(0x950, PIN_INPUT_PULLUP | MUX_MODE0) /* (A17) spi0_sclk.spi0_sclk */
+ AM33XX_IOPAD(0x954, PIN_INPUT_PULLUP | MUX_MODE0) /* (B17) spi0_d0.spi0_d0 */
+ AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE0) /* (B16) spi0_d1.spi0_d1 */
+ AM33XX_IOPAD(0x95c, PIN_INPUT_PULLUP | MUX_MODE0) /* (A16) spi0_cs0.spi0_cs0 */
+ >;
+ };
+
+ spi1_pins: pinmux-spi1-pins {
+ pinctrl-single,pins = <
+ AM33XX_IOPAD(0x964, PIN_INPUT_PULLUP | MUX_MODE4) /* (C18) eCAP0_in_PWM0_out.spi1_sclk */
+ AM33XX_IOPAD(0x968, PIN_INPUT_PULLUP | MUX_MODE4) /* (E18) uart0_ctsn.spi1_d0 */
+ AM33XX_IOPAD(0x96c, PIN_INPUT_PULLUP | MUX_MODE4) /* (E17) uart0_rtsn.spi1_d1 */
+ AM33XX_IOPAD(0x9b0, PIN_INPUT_PULLUP | MUX_MODE4) /* (A15) xdma_event_intr0.spi1_cs1 */
+ >;
+ };
+
+ usr_leds_pins: pinmux-usr-leds-pins {
+ pinctrl-single,pins = <
+ AM33XX_IOPAD(0x854, PIN_OUTPUT | MUX_MODE7) /* (V15) gpmc_a5.gpio1[21] - USR_LED_0 */
+ AM33XX_IOPAD(0x858, PIN_OUTPUT | MUX_MODE7) /* (U15) gpmc_a6.gpio1[22] - USR_LED_1 */
+ AM33XX_IOPAD(0x85c, PIN_OUTPUT | MUX_MODE7) /* (T15) gpmc_a7.gpio1[23] - USR_LED_2 */
+ AM33XX_IOPAD(0x860, PIN_OUTPUT | MUX_MODE7) /* (V16) gpmc_a8.gpio1[24] - USR_LED_3 */
+ >;
+ };
+
+ uart0_pins: pinmux-uart0-pins {
+ pinctrl-single,pins = <
+ AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* (E15) uart0_rxd.uart0_rxd */
+ AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* (E16) uart0_txd.uart0_txd */
+ >;
+ };
+
+ uart4_pins: pinmux-uart4-pins {
+ pinctrl-single,pins = <
+ AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE6) /* (T17) gpmc_wait0.uart4_rxd */
+ AM33XX_IOPAD(0x874, PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* (U17) gpmc_wpn.uart4_txd */
+ >;
+ };
+};
+
+&epwmss0 {
+ status = "okay";
+};
+
+&ehrpwm0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&ehrpwm0_pins>;
+};
+
+&epwmss1 {
+ status = "okay";
+};
+
+&ehrpwm1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&ehrpwm1_pins>;
+};
+
+&i2c0 {
+ eeprom: eeprom@50 {
+ compatible = "atmel,24c256";
+ reg = <0x50>;
+ };
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins>;
+
+ status = "okay";
+ clock-frequency = <400000>;
+};
+
+&mmc1 {
+ status = "okay";
+ vmmc-supply = <&vmmcsd_fixed>;
+ bus-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins>;
+ cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+};
+
+&rtc {
+ system-power-controller;
+};
+
+&tscadc {
+ status = "okay";
+ adc {
+ ti,adc-channels = <0 1 2 3 4 5 6 7>;
+ ti,chan-step-avg = <16 16 16 16 16 16 16 16>;
+ ti,chan-step-opendelay = <0x98 0x98 0x98 0x98 0x98 0x98 0x98 0x98>;
+ ti,chan-step-sampledelay = <0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0>;
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins>;
+
+ status = "okay";
+};
+
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart4_pins>;
+
+ status = "okay";
+};
+
+&usb {
+ status = "okay";
+};
+
+&usb_ctrl_mod {
+ status = "okay";
+};
+
+&usb0_phy {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+ dr_mode = "otg";
+};
+
+&usb1_phy {
+ status = "okay";
+};
+
+&usb1 {
+ status = "okay";
+ dr_mode = "host";
+};
+
+&cppi41dma {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/am3517-evm.dts b/arch/arm/boot/dts/am3517-evm.dts
index 0e4a125f78e3..98aadb0f81c5 100644
--- a/arch/arm/boot/dts/am3517-evm.dts
+++ b/arch/arm/boot/dts/am3517-evm.dts
@@ -8,11 +8,17 @@
/dts-v1/;
#include "am3517.dtsi"
+#include "am3517-som.dtsi"
+#include <dt-bindings/input/input.h>
/ {
model = "TI AM3517 EVM (AM3517/05 TMDSEVM3517)";
compatible = "ti,am3517-evm", "ti,am3517", "ti,omap3";
+ aliases {
+ display0 = &lcd0;
+ };
+
memory@80000000 {
device_type = "memory";
reg = <0x80000000 0x10000000>; /* 256 MB */
@@ -24,6 +30,144 @@
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
+
+ gpio-keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <100>;
+
+ user_pb {
+ label = "User Push Button";
+ linux,code = <BTN_0>;
+ gpios = <&tca6416 5 GPIO_ACTIVE_LOW>;
+ };
+
+ user_sw_1 {
+ label = "User Switch 1";
+ linux,code = <BTN_1>;
+ gpios = <&tca6416 8 GPIO_ACTIVE_LOW>;
+ };
+
+ user_sw_2 {
+ label = "User Switch 2";
+ linux,code = <BTN_2>;
+ gpios = <&tca6416 9 GPIO_ACTIVE_LOW>;
+ };
+
+ user_sw_3 {
+ label = "User Switch 3";
+ linux,code = <BTN_3>;
+ gpios = <&tca6416 10 GPIO_ACTIVE_LOW>;
+ };
+
+ user_sw_4 {
+ label = "User Switch 4";
+ linux,code = <BTN_4>;
+ gpios = <&tca6416 11 GPIO_ACTIVE_LOW>;
+ };
+
+ user_sw_5 {
+ label = "User Switch 5";
+ linux,code = <BTN_5>;
+ gpios = <&tca6416 12 GPIO_ACTIVE_LOW>;
+ };
+
+ user_sw_6 {
+ label = "User Switch 6";
+ linux,code = <BTN_6>;
+ gpios = <&tca6416 13 GPIO_ACTIVE_LOW>;
+ };
+
+ user_sw_7 {
+ label = "User Switch 7";
+ linux,code = <BTN_7>;
+ gpios = <&tca6416 14 GPIO_ACTIVE_LOW>;
+ };
+
+ user_sw_8 {
+ label = "User Switch 8";
+ linux,code = <BTN_8>;
+ gpios = <&tca6416 15 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&leds_pins>;
+
+ user_led_1 {
+ label = "am3517evm:green:user_led_1";
+ gpios = <&tca6416 7 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ user_led_2 {
+ label = "am3517evm:green:user_led_2";
+ gpios = <&tca6416 6 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ user_led_3 {
+ label = "am3517evm:green:user_led_3";
+ gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "mmc0"; /* SD/MMC card activity */
+ };
+
+ user_led_4 {
+ label = "am3517evm:green:user_led_4";
+ gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ lcd0: display@0 {
+ compatible = "panel-dpi";
+ label = "15";
+ status = "okay";
+ pinctrl-names = "default";
+ enable-gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>; /* gpio176, lcd INI */
+
+ port {
+ lcd_in: endpoint {
+ remote-endpoint = <&dpi_out>;
+ };
+ };
+
+ panel-timing {
+ clock-frequency = <9000000>;
+ hactive = <480>;
+ vactive = <272>;
+ hfront-porch = <3>;
+ hback-porch = <2>;
+ hsync-len = <42>;
+ vback-porch = <3>;
+ vfront-porch = <4>;
+ vsync-len = <11>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <1>;
+ };
+ };
+
+ bl: backlight {
+ compatible = "pwm-backlight";
+ pinctrl-names = "default";
+ pinctrl-0 = <&backlight_pins>;
+ pwms = <&pwm11 0 5000000 0>;
+ brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
+ default-brightness-level = <7>;
+ enable-gpios = <&gpio6 22 GPIO_ACTIVE_HIGH>; /* gpio_182 */
+ };
+
+ pwm11: dmtimer-pwm@11 {
+ compatible = "ti,omap-dmtimer-pwm";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm_pins>;
+ ti,timers = <&timer11>;
+ #pwm-cells = <3>;
+ };
};
&davinci_emac {
@@ -34,12 +178,32 @@
status = "okay";
};
-&i2c1 {
- clock-frequency = <400000>;
+&dss {
+ status = "ok";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&dss_dpi_pins>;
+
+ vdds_dsi-supply = <&vdd_io_reg>;
+ vdda_video-supply = <&vdd_io_reg>;
+
+ port {
+ dpi_out: endpoint {
+ remote-endpoint = <&lcd_in>;
+ data-lines = <16>;
+ };
+ };
};
&i2c2 {
clock-frequency = <400000>;
+ /* User DIP swithes [1:8] / User LEDS [1:2] */
+ tca6416: gpio@21 {
+ compatible = "ti,tca6416";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
};
&i2c3 {
@@ -47,8 +211,13 @@
};
&mmc1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
vmmc-supply = <&vmmc_fixed>;
bus-width = <4>;
+ wp-gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>; /* gpio_126 */
+ cd-gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>; /* gpio_127 */
};
&mmc2 {
@@ -59,3 +228,63 @@
status = "disabled";
};
+&omap3_pmx_core {
+
+ leds_pins: pinmux_leds_pins {
+ pinctrl-single,pins = <
+ OMAP3_WKUP_IOPAD(0x2a24, PIN_OUTPUT_PULLUP | MUX_MODE4) /* jtag_emu0.gpio_11 */
+ OMAP3_WKUP_IOPAD(0x2a26, PIN_OUTPUT_PULLUP | MUX_MODE4) /* jtag_emu1.gpio_31 */
+ >;
+ };
+
+ mmc1_pins: pinmux_mmc1_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */
+ OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */
+ OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */
+ OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */
+ OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */
+ OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */
+ OMAP3_CORE1_IOPAD(0x2150, PIN_INPUT_PULLUP | MUX_MODE4) /* sdmmc1_dat4.gpio_126 */
+ OMAP3_CORE1_IOPAD(0x2152, PIN_INPUT_PULLUP | MUX_MODE4) /* sdmmc1_dat5.gpio_127 */
+ >;
+ };
+
+ pwm_pins: pinmux_pwm_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21dc, PIN_OUTPUT | MUX_MODE1) /* mcspi2_cs0.gpt11_pwm */
+ >;
+ };
+
+ backlight_pins: pinmux_backlight_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21de, PIN_OUTPUT | MUX_MODE4) /* mcspi2_cs1.gpio_182 */
+ >;
+ };
+
+ dss_dpi_pins: pinmux_dss_dpi_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21d2, PIN_OUTPUT | MUX_MODE4) /* mcspi1_cs2.gpio_176 */
+ OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */
+ OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */
+ OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */
+ OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */
+ OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */
+ OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */
+ OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */
+ OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */
+ OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */
+ OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */
+ OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */
+ OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */
+ OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */
+ OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */
+ OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */
+ OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */
+ OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */
+ OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */
+ OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */
+ OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */
+ >;
+ };
+};
diff --git a/arch/arm/boot/dts/am3517-som.dtsi b/arch/arm/boot/dts/am3517-som.dtsi
new file mode 100644
index 000000000000..a6d5ff73c163
--- /dev/null
+++ b/arch/arm/boot/dts/am3517-som.dtsi
@@ -0,0 +1,142 @@
+/*
+ * Copyright (C) 2016 Derald D. Woods <woods.technical@gmail.com>
+ *
+ * Based on am3517-evm.dts
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/ {
+ cpus {
+ cpu@0 {
+ cpu0-supply = <&vdd_core_reg>;
+ };
+ };
+};
+
+&gpmc {
+ ranges = <0 0 0x30000000 0x1000000>; /* CS0: 16MB for NAND */
+
+ nand@0,0 {
+ compatible = "ti,omap2-nand";
+ linux,mtd-name = "micron,mt29f4g16abchch";
+ reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+ nand-bus-width = <16>;
+ ti,nand-ecc-opt = "bch8";
+ gpmc,sync-clk-ps = <0>;
+ gpmc,cs-on-ns = <0>;
+ gpmc,cs-rd-off-ns = <44>;
+ gpmc,cs-wr-off-ns = <44>;
+ gpmc,adv-on-ns = <6>;
+ gpmc,adv-rd-off-ns = <34>;
+ gpmc,adv-wr-off-ns = <44>;
+ gpmc,we-off-ns = <40>;
+ gpmc,oe-off-ns = <54>;
+ gpmc,access-ns = <64>;
+ gpmc,rd-cycle-ns = <82>;
+ gpmc,wr-cycle-ns = <82>;
+ gpmc,wr-access-ns = <40>;
+ gpmc,wr-data-mux-bus-ns = <0>;
+ gpmc,device-width = <2>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+};
+
+&i2c1 {
+ clock-frequency = <400000>;
+
+ s35390a: s35390a@30 {
+ compatible = "sii,s35390a";
+ reg = <0x30>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&rtc_pins>;
+ interrupts-extended = <&gpio2 23 IRQ_TYPE_EDGE_FALLING>; /* gpio_55 */
+ };
+
+ tps: tps65023@48 {
+ compatible = "ti,tps65023";
+ reg = <0x48>;
+
+ regulators {
+ vdd_core_reg: VDCDC1 {
+ regulator-name = "vdd_core";
+ compatible = "regulator-fixed";
+ regulator-always-on;
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ vdd_io_reg: VDCDC2 {
+ regulator-name = "vdd_io";
+ compatible = "regulator-fixed";
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ vdd_1v8_reg: VDCDC3 {
+ regulator-name = "vdd_1v8";
+ compatible = "regulator-fixed";
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vdd_usb18_reg: LDO1 {
+ regulator-name = "vdd_usb18";
+ compatible = "regulator-fixed";
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vdd_usb33_reg: LDO2 {
+ regulator-name = "vdd_usb33";
+ compatible = "regulator-fixed";
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+ };
+ };
+
+ touchscreen: tsc2004@4b {
+ compatible = "ti,tsc2004";
+ reg = <0x4b>;
+
+ vio-supply = <&vdd_io_reg>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&tsc2004_pins>;
+ interrupts-extended = <&gpio3 1 IRQ_TYPE_EDGE_RISING>; /* gpio_65 */
+
+ touchscreen-fuzz-x = <4>;
+ touchscreen-fuzz-y = <7>;
+ touchscreen-fuzz-pressure = <2>;
+ touchscreen-size-x = <480>;
+ touchscreen-size-y = <272>;
+ touchscreen-max-pressure = <2048>;
+
+ ti,x-plate-ohms = <280>;
+ ti,esd-recovery-timeout-ms = <8000>;
+ };
+};
+
+&omap3_pmx_core {
+
+ rtc_pins: pinmux_rtc_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x20b6, PIN_INPUT_PULLUP | MUX_MODE4) /* gpmc_ncs4.gpio_55 */
+ >;
+ };
+
+ tsc2004_pins: pinmux_tsc2004_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x20d2, PIN_INPUT | MUX_MODE4) /* gpmc_wait3.gpio_65 */
+ >;
+ };
+};
diff --git a/arch/arm/boot/dts/am437x-cm-t43.dts b/arch/arm/boot/dts/am437x-cm-t43.dts
index 3b9a94c274a7..bff5abe69bdb 100644
--- a/arch/arm/boot/dts/am437x-cm-t43.dts
+++ b/arch/arm/boot/dts/am437x-cm-t43.dts
@@ -203,7 +203,7 @@
tps65218: tps65218@24 {
compatible = "ti,tps65218";
reg = <0x24>;
- interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* NMIn */
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* NMIn */
interrupt-parent = <&gic>;
interrupt-controller;
#interrupt-cells = <2>;
diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts
index 8fe95cd7232a..60414b1ca404 100644
--- a/arch/arm/boot/dts/am437x-gp-evm.dts
+++ b/arch/arm/boot/dts/am437x-gp-evm.dts
@@ -543,7 +543,7 @@
tps65218: tps65218@24 {
reg = <0x24>;
compatible = "ti,tps65218";
- interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* NMIn */
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* NMIn */
interrupt-controller;
#interrupt-cells = <2>;
diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts
index 4118802b7fea..440351ad0b80 100644
--- a/arch/arm/boot/dts/am437x-sk-evm.dts
+++ b/arch/arm/boot/dts/am437x-sk-evm.dts
@@ -15,6 +15,7 @@
#include <dt-bindings/pwm/pwm.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
/ {
model = "TI AM437x SK EVM";
@@ -158,6 +159,22 @@
};
};
};
+
+ vmmcwl_fixed: fixedregulator-mmcwl {
+ /*
+ * WL_EN is not SDIO standard compliant. It is an out of band
+ * signal and hard to be dealt with in a standard way by the
+ * SDIO core driver.
+ * So modelling the WL_EN line as a regulator was a natural
+ * choice as the MMC core already deals with MMC supplies.
+ */
+ compatible = "regulator-fixed";
+ regulator-name = "vmmcwl_fixed";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ gpio = <&gpio4 8 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
};
&am43xx_pinmux {
@@ -418,6 +435,62 @@
AM4372_IOPAD(0xac4, PIN_OUTPUT | MUX_MODE0) /* usb0_drvvbus.usb0_drvvbus */
>;
};
+
+ mmc3_pins_default: pinmux_mmc3_pins_default {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x9f0, PIN_INPUT_PULLUP | MUX_MODE3) /* (AD21) cam1_data2.mmc2_clk */
+ AM4372_IOPAD(0x9f4, PIN_INPUT_PULLUP | MUX_MODE3) /* (AE22) cam1_data3.mmc2_cmd */
+ AM4372_IOPAD(0x9f8, PIN_INPUT_PULLUP | MUX_MODE3) /* (AD22) cam1_data4.mmc2_dat0 */
+ AM4372_IOPAD(0x9fc, PIN_INPUT_PULLUP | MUX_MODE3) /* (AE23) cam1_data5.mmc2_dat1 */
+ AM4372_IOPAD(0xa00, PIN_INPUT_PULLUP | MUX_MODE3) /* (AD23) cam1_data6.mmc2_dat2 */
+ AM4372_IOPAD(0xa04, PIN_INPUT_PULLUP | MUX_MODE3) /* (AE24) cam1_data7.mmc2_dat3 */
+ >;
+ };
+
+ mmc3_pins_sleep: pinmux_mmc3_pins_sleep {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x9f0, PIN_INPUT_PULLDOWN | MUX_MODE7) /* (AD21) cam1_data2.mmc2_clk */
+ AM4372_IOPAD(0x9f4, PIN_INPUT_PULLDOWN | MUX_MODE7) /* (AE22) cam1_data3.mmc2_cmd */
+ AM4372_IOPAD(0x9f8, PIN_INPUT_PULLDOWN | MUX_MODE7) /* (AD22) cam1_data4.mmc2_dat0 */
+ AM4372_IOPAD(0x9fc, PIN_INPUT_PULLDOWN | MUX_MODE7) /* (AE23) cam1_data5.mmc2_dat1 */
+ AM4372_IOPAD(0xa00, PIN_INPUT_PULLDOWN | MUX_MODE7) /* (AD23) cam1_data6.mmc2_dat2 */
+ AM4372_IOPAD(0xa04, PIN_INPUT_PULLDOWN | MUX_MODE7) /* (AE24) cam1_data7.mmc2_dat3 */
+ >;
+ };
+
+ wlan_pins_default: pinmux_wlan_pins_default {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x9d0, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* cam1_data8.gpio4_8 WL_EN */
+ AM4372_IOPAD(0x9e4, PIN_INPUT | WAKEUP_ENABLE | MUX_MODE7) /* cam1_wen.gpio4_13 WL_IRQ */
+ >;
+ };
+
+ wlan_pins_sleep: pinmux_wlan_pins_sleep {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x9d0, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* cam1_data8.gpio4_8 WL_EN */
+ AM4372_IOPAD(0x9e4, PIN_INPUT | WAKEUP_ENABLE | MUX_MODE7) /* cam1_wen.gpio4_13 WL_IRQ */
+ >;
+ };
+
+ uart1_bt_pins_default: pinmux_uart1_bt_pins_default {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x980, PIN_INPUT | MUX_MODE0) /* uart1_rxd.uart1_rxd */
+ AM4372_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_txd.uart1_txd */
+ AM4372_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_ctsn.uart1_ctsn */
+ AM4372_IOPAD(0x97c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_rtsn.uart1_rtsn */
+ AM4372_IOPAD(0x9cc, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* cam1_data9.gpio4_7 BT_EN */
+ >;
+ };
+
+ uart1_bt_pins_sleep: pinmux_uart1_bt_pins_sleep {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x980, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* uart1_rxd.uart1_rxd */
+ AM4372_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* uart1_txd.uart1_txd */
+ AM4372_IOPAD(0x978, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* uart1_ctsn.uart1_ctsn */
+ AM4372_IOPAD(0x97c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* uart1_rtsn.uart1_rtsn */
+ AM4372_IOPAD(0x9cc, PIN_OUTPUT_PULLUP | MUX_MODE7) /* cam1_data9.gpio4_7 BT_EN */
+ >;
+ };
};
&i2c0 {
@@ -581,6 +654,10 @@
status = "okay";
};
+&gpio4 {
+ status = "okay";
+};
+
&gpio5 {
status = "okay";
};
@@ -595,6 +672,44 @@
cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
};
+&uart1 {
+ status = "okay";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&uart1_bt_pins_default>;
+ pinctrl-1 = <&uart1_bt_pins_sleep>;
+};
+
+&mmc3 {
+ status = "okay";
+ /*
+ * these are on the crossbar and are outlined in the
+ * xbar-event-map element
+ */
+ dmas = <&edma_xbar 30 0 1>,
+ <&edma_xbar 31 0 2>;
+ dma-names = "tx", "rx";
+ vmmc-supply = <&vmmcwl_fixed>;
+ bus-width = <4>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&mmc3_pins_default>;
+ pinctrl-1 = <&mmc3_pins_sleep>;
+ cap-power-off-card;
+ keep-power-in-suspend;
+ ti,non-removable;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ wlcore: wlcore@2 {
+ compatible = "ti,wl1835";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&wlan_pins_default>;
+ pinctrl-1 = <&wlan_pins_sleep>;
+ reg = <2>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <13 IRQ_TYPE_LEVEL_HIGH>;
+ };
+};
+
&usb2_phy1 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts
index a66941885c11..6502d3397653 100644
--- a/arch/arm/boot/dts/am43x-epos-evm.dts
+++ b/arch/arm/boot/dts/am43x-epos-evm.dts
@@ -595,7 +595,7 @@
tps65218: tps65218@24 {
reg = <0x24>;
compatible = "ti,tps65218";
- interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* NMIn */
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* NMIn */
interrupt-controller;
#interrupt-cells = <2>;
diff --git a/arch/arm/boot/dts/am571x-idk.dts b/arch/arm/boot/dts/am571x-idk.dts
index a2555140babc..5bb9d68d6e90 100644
--- a/arch/arm/boot/dts/am571x-idk.dts
+++ b/arch/arm/boot/dts/am571x-idk.dts
@@ -10,6 +10,7 @@
#include "dra72x.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
+#include "dra7-mmc-iodelay.dtsi"
#include "dra72x-mmc-iodelay.dtsi"
#include "am57xx-idk-common.dtsi"
@@ -102,7 +103,7 @@
&mmc1 {
pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104";
- pinctrl-0 = <&mmc1_pins_default>;
+ pinctrl-0 = <&mmc1_pins_default_no_clk_pu>;
pinctrl-1 = <&mmc1_pins_hs>;
pinctrl-2 = <&mmc1_pins_sdr12>;
pinctrl-3 = <&mmc1_pins_sdr25>;
@@ -112,7 +113,7 @@
};
&mmc2 {
- pinctrl-names = "default", "hs", "ddr_1_8v";
+ pinctrl-names = "default", "hs", "ddr_3_3v";
pinctrl-0 = <&mmc2_pins_default>;
pinctrl-1 = <&mmc2_pins_hs>;
pinctrl-2 = <&mmc2_pins_ddr_rev20 &mmc2_iodelay_ddr_conf>;
diff --git a/arch/arm/boot/dts/am572x-idk.dts b/arch/arm/boot/dts/am572x-idk.dts
index 3a02ed720957..3ef9111d0e8b 100644
--- a/arch/arm/boot/dts/am572x-idk.dts
+++ b/arch/arm/boot/dts/am572x-idk.dts
@@ -9,6 +9,7 @@
/dts-v1/;
#include "dra74x.dtsi"
+#include "dra7-mmc-iodelay.dtsi"
#include "dra74x-mmc-iodelay.dtsi"
#include "am572x-idk-common.dtsi"
@@ -20,7 +21,7 @@
&mmc1 {
pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104";
- pinctrl-0 = <&mmc1_pins_default>;
+ pinctrl-0 = <&mmc1_pins_default_no_clk_pu>;
pinctrl-1 = <&mmc1_pins_hs>;
pinctrl-2 = <&mmc1_pins_sdr12>;
pinctrl-3 = <&mmc1_pins_sdr25>;
@@ -30,7 +31,7 @@
};
&mmc2 {
- pinctrl-names = "default", "hs", "ddr_1_8v";
+ pinctrl-names = "default", "hs", "ddr_3_3v";
pinctrl-0 = <&mmc2_pins_default>;
pinctrl-1 = <&mmc2_pins_hs>;
pinctrl-2 = <&mmc2_pins_ddr_rev20>;
diff --git a/arch/arm/boot/dts/am574x-idk.dts b/arch/arm/boot/dts/am574x-idk.dts
index 41e12a382d2f..378dfa780ac1 100644
--- a/arch/arm/boot/dts/am574x-idk.dts
+++ b/arch/arm/boot/dts/am574x-idk.dts
@@ -7,6 +7,8 @@
/dts-v1/;
#include "dra76x.dtsi"
+#include "dra7-mmc-iodelay.dtsi"
+#include "dra76x-mmc-iodelay.dtsi"
#include "am572x-idk-common.dtsi"
/ {
@@ -20,3 +22,21 @@
spi-max-frequency = <96000000>;
};
};
+
+&mmc1 {
+ pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104";
+ pinctrl-0 = <&mmc1_pins_default_no_clk_pu>;
+ pinctrl-1 = <&mmc1_pins_hs>;
+ pinctrl-2 = <&mmc1_pins_default>;
+ pinctrl-3 = <&mmc1_pins_hs>;
+ pinctrl-4 = <&mmc1_pins_sdr50>;
+ pinctrl-5 = <&mmc1_pins_ddr50 &mmc1_iodelay_ddr_conf>;
+ pinctrl-6 = <&mmc1_pins_ddr50 &mmc1_iodelay_sdr104_conf>;
+};
+
+&mmc2 {
+ pinctrl-names = "default", "hs", "ddr_3_3v";
+ pinctrl-0 = <&mmc2_pins_default>;
+ pinctrl-1 = <&mmc2_pins_default>;
+ pinctrl-2 = <&mmc2_pins_default>;
+};
diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
index 6204a266212a..ad953113cefb 100644
--- a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
+++ b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
@@ -444,8 +444,8 @@
vmmc-supply = <&vdd_3v3>;
vqmmc-supply = <&vdd_3v3>;
bus-width = <8>;
- ti,non-removable;
- cap-mmc-dual-data-rate;
+ non-removable;
+ no-1-8-v;
};
&sata {
diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts
index d6689106d2a8..70a71c641066 100644
--- a/arch/arm/boot/dts/am57xx-beagle-x15.dts
+++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts
@@ -25,10 +25,11 @@
pinctrl-1 = <&mmc1_pins_hs>;
vmmc-supply = <&ldo1_reg>;
+ no-1-8-v;
};
&mmc2 {
- pinctrl-names = "default", "hs", "ddr_1_8v";
+ pinctrl-names = "default", "hs", "ddr_3_3v";
pinctrl-0 = <&mmc2_pins_default>;
pinctrl-1 = <&mmc2_pins_hs>;
pinctrl-2 = <&mmc2_pins_ddr_3_3v_rev11 &mmc2_iodelay_ddr_3_3v_rev11_conf>;
diff --git a/arch/arm/boot/dts/am57xx-idk-common.dtsi b/arch/arm/boot/dts/am57xx-idk-common.dtsi
index 43cdf523a8a0..ad87f1ae904d 100644
--- a/arch/arm/boot/dts/am57xx-idk-common.dtsi
+++ b/arch/arm/boot/dts/am57xx-idk-common.dtsi
@@ -115,17 +115,6 @@
DRA7XX_CORE_IOPAD(0x37d4, MUX_MODE15 | PULL_UP) /* dcan1_rx.off */
>;
};
-
- mmc1_pins_default: mmc1_pins_default {
- pinctrl-single,pins = <
- DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mmc1_clk.clk */
- DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
- DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
- DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
- DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
- DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
- >;
- };
};
&i2c1 {
@@ -423,8 +412,9 @@
vmmc-supply = <&v3_3d>;
vqmmc-supply = <&v3_3d>;
bus-width = <8>;
- ti,non-removable;
+ non-removable;
max-frequency = <96000000>;
+ no-1-8-v;
};
&dcan1 {
diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts
index afe46097a403..77261a2fb949 100644
--- a/arch/arm/boot/dts/armada-370-db.dts
+++ b/arch/arm/boot/dts/armada-370-db.dts
@@ -105,33 +105,6 @@
usb@51000 {
status = "okay";
};
-
- nand@d0000 {
- status = "okay";
- num-cs = <1>;
- marvell,nand-keep-config;
- marvell,nand-enable-arbiter;
- nand-on-flash-bbt;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "U-Boot";
- reg = <0 0x800000>;
- };
- partition@800000 {
- label = "Linux";
- reg = <0x800000 0x800000>;
- };
- partition@1000000 {
- label = "Filesystem";
- reg = <0x1000000 0x3f000000>;
- };
- };
- };
};
};
@@ -239,3 +212,33 @@
};
};
+&nand_controller {
+ status = "okay";
+
+ nand@0 {
+ reg = <0>;
+ label = "pxa3xx_nand-0";
+ nand-rb = <0>;
+ marvell,nand-keep-config;
+ nand-on-flash-bbt;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "U-Boot";
+ reg = <0 0x800000>;
+ };
+ partition@800000 {
+ label = "Linux";
+ reg = <0x800000 0x800000>;
+ };
+ partition@1000000 {
+ label = "Filesystem";
+ reg = <0x1000000 0x3f000000>;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/armada-370-dlink-dns327l.dts b/arch/arm/boot/dts/armada-370-dlink-dns327l.dts
index 8e46f63cbaa1..baa459dd51e4 100644
--- a/arch/arm/boot/dts/armada-370-dlink-dns327l.dts
+++ b/arch/arm/boot/dts/armada-370-dlink-dns327l.dts
@@ -44,61 +44,6 @@
usb@50000 {
status = "okay";
};
-
- nand@d0000 {
- status = "okay";
- num-cs = <1>;
- marvell,nand-keep-config;
- marvell,nand-enable-arbiter;
- nand-on-flash-bbt;
- nand-ecc-strength = <4>;
- nand-ecc-step-size = <512>;
-
- partition@0 {
- label = "u-boot";
- /* 1.0 MiB */
- reg = <0x0000000 0x100000>;
- read-only;
- };
-
- partition@100000 {
- label = "u-boot-env";
- /* 128 KiB */
- reg = <0x100000 0x20000>;
- read-only;
- };
-
- partition@120000 {
- label = "uImage";
- /* 7 MiB */
- reg = <0x120000 0x700000>;
- };
-
- partition@820000 {
- label = "ubifs";
- /* ~ 84 MiB */
- reg = <0x820000 0x54e0000>;
- };
-
- /* Hardcoded into stock bootloader */
- partition@5d00000 {
- label = "failsafe-uImage";
- /* 5 MiB */
- reg = <0x5d00000 0x500000>;
- };
-
- partition@6200000 {
- label = "failsafe-fs";
- /* 29 MiB */
- reg = <0x6200000 0x1d00000>;
- };
-
- partition@7f00000 {
- label = "bbt";
- /* 1 MiB for BBT */
- reg = <0x7f00000 0x100000>;
- };
- };
};
};
@@ -319,3 +264,68 @@
clock-frequency = <100000>;
status = "okay";
};
+
+&nand_controller {
+ status = "okay";
+
+ nand@0 {
+ reg = <0>;
+ label = "pxa3xx_nand-0";
+ nand-rb = <0>;
+ marvell,nand-keep-config;
+ nand-on-flash-bbt;
+ nand-ecc-strength = <4>;
+ nand-ecc-step-size = <512>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ /* 1.0 MiB */
+ reg = <0x0000000 0x100000>;
+ read-only;
+ };
+
+ partition@100000 {
+ label = "u-boot-env";
+ /* 128 KiB */
+ reg = <0x100000 0x20000>;
+ read-only;
+ };
+
+ partition@120000 {
+ label = "uImage";
+ /* 7 MiB */
+ reg = <0x120000 0x700000>;
+ };
+
+ partition@820000 {
+ label = "ubifs";
+ /* ~ 84 MiB */
+ reg = <0x820000 0x54e0000>;
+ };
+
+ /* Hardcoded into stock bootloader */
+ partition@5d00000 {
+ label = "failsafe-uImage";
+ /* 5 MiB */
+ reg = <0x5d00000 0x500000>;
+ };
+
+ partition@6200000 {
+ label = "failsafe-fs";
+ /* 29 MiB */
+ reg = <0x6200000 0x1d00000>;
+ };
+
+ partition@7f00000 {
+ label = "bbt";
+ /* 1 MiB for BBT */
+ reg = <0x7f00000 0x100000>;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/armada-370-mirabox.dts b/arch/arm/boot/dts/armada-370-mirabox.dts
index 996f31b00729..7c2f5a79b50d 100644
--- a/arch/arm/boot/dts/armada-370-mirabox.dts
+++ b/arch/arm/boot/dts/armada-370-mirabox.dts
@@ -108,27 +108,6 @@
reg = <0x25>;
};
};
-
- nand@d0000 {
- status = "okay";
- num-cs = <1>;
- marvell,nand-keep-config;
- marvell,nand-enable-arbiter;
- nand-on-flash-bbt;
-
- partition@0 {
- label = "U-Boot";
- reg = <0 0x400000>;
- };
- partition@400000 {
- label = "Linux";
- reg = <0x400000 0x400000>;
- };
- partition@800000 {
- label = "Filesystem";
- reg = <0x800000 0x3f800000>;
- };
- };
};
};
};
@@ -173,3 +152,33 @@
};
};
+&nand_controller {
+ status = "okay";
+
+ nand@0 {
+ reg = <0>;
+ label = "pxa3xx_nand-0";
+ nand-rb = <0>;
+ marvell,nand-keep-config;
+ nand-on-flash-bbt;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "U-Boot";
+ reg = <0 0x400000>;
+ };
+ partition@400000 {
+ label = "Linux";
+ reg = <0x400000 0x400000>;
+ };
+ partition@800000 {
+ label = "Filesystem";
+ reg = <0x800000 0x3f800000>;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/armada-370-netgear-rn102.dts b/arch/arm/boot/dts/armada-370-netgear-rn102.dts
index 56634803e16b..b0b640b7de40 100644
--- a/arch/arm/boot/dts/armada-370-netgear-rn102.dts
+++ b/arch/arm/boot/dts/armada-370-netgear-rn102.dts
@@ -81,46 +81,6 @@
pwm_polarity = <0>;
};
};
-
- nand@d0000 {
- status = "okay";
- num-cs = <1>;
- marvell,nand-keep-config;
- marvell,nand-enable-arbiter;
- nand-on-flash-bbt;
-
- /* Use Hardware BCH ECC */
- nand-ecc-strength = <4>;
- nand-ecc-step-size = <512>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0000000 0x180000>; /* 1.5MB */
- read-only;
- };
-
- partition@180000 {
- label = "u-boot-env";
- reg = <0x180000 0x20000>; /* 128KB */
- read-only;
- };
-
- partition@200000 {
- label = "uImage";
- reg = <0x0200000 0x600000>; /* 6MB */
- };
-
- partition@800000 {
- label = "minirootfs";
- reg = <0x0800000 0x400000>; /* 4MB */
- };
-
- /* Last MB is for the BBT, i.e. not writable */
- partition@c00000 {
- label = "ubifs";
- reg = <0x0c00000 0x7400000>; /* 116MB */
- };
- };
};
};
@@ -264,3 +224,53 @@
marvell,function = "gpio";
};
};
+
+&nand_controller {
+ status = "okay";
+
+ nand@0 {
+ reg = <0>;
+ label = "pxa3xx_nand-0";
+ nand-rb = <0>;
+ marvell,nand-keep-config;
+ nand-on-flash-bbt;
+
+ /* Use Hardware BCH ECC */
+ nand-ecc-strength = <4>;
+ nand-ecc-step-size = <512>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0000000 0x180000>; /* 1.5MB */
+ read-only;
+ };
+
+ partition@180000 {
+ label = "u-boot-env";
+ reg = <0x180000 0x20000>; /* 128KB */
+ read-only;
+ };
+
+ partition@200000 {
+ label = "uImage";
+ reg = <0x0200000 0x600000>; /* 6MB */
+ };
+
+ partition@800000 {
+ label = "minirootfs";
+ reg = <0x0800000 0x400000>; /* 4MB */
+ };
+
+ /* Last MB is for the BBT, i.e. not writable */
+ partition@c00000 {
+ label = "ubifs";
+ reg = <0x0c00000 0x7400000>; /* 116MB */
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/armada-370-netgear-rn104.dts b/arch/arm/boot/dts/armada-370-netgear-rn104.dts
index 16d0307f786a..9fd1cb9f4992 100644
--- a/arch/arm/boot/dts/armada-370-netgear-rn104.dts
+++ b/arch/arm/boot/dts/armada-370-netgear-rn104.dts
@@ -90,46 +90,6 @@
reg = <0x23>;
};
};
-
- nand@d0000 {
- status = "okay";
- num-cs = <1>;
- marvell,nand-keep-config;
- marvell,nand-enable-arbiter;
- nand-on-flash-bbt;
-
- /* Use Hardware BCH ECC */
- nand-ecc-strength = <4>;
- nand-ecc-step-size = <512>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0000000 0x180000>; /* 1.5MB */
- read-only;
- };
-
- partition@180000 {
- label = "u-boot-env";
- reg = <0x180000 0x20000>; /* 128KB */
- read-only;
- };
-
- partition@200000 {
- label = "uImage";
- reg = <0x0200000 0x600000>; /* 6MB */
- };
-
- partition@800000 {
- label = "minirootfs";
- reg = <0x0800000 0x400000>; /* 4MB */
- };
-
- /* Last MB is for the BBT, i.e. not writable */
- partition@c00000 {
- label = "ubifs";
- reg = <0x0c00000 0x7400000>; /* 116MB */
- };
- };
};
};
@@ -276,3 +236,53 @@
marvell,function = "gpio";
};
};
+
+&nand_controller {
+ status = "okay";
+
+ nand@0 {
+ reg = <0>;
+ label = "pxa3xx_nand-0";
+ nand-rb = <0>;
+ marvell,nand-keep-config;
+ nand-on-flash-bbt;
+
+ /* Use Hardware BCH ECC */
+ nand-ecc-strength = <4>;
+ nand-ecc-step-size = <512>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0000000 0x180000>; /* 1.5MB */
+ read-only;
+ };
+
+ partition@180000 {
+ label = "u-boot-env";
+ reg = <0x180000 0x20000>; /* 128KB */
+ read-only;
+ };
+
+ partition@200000 {
+ label = "uImage";
+ reg = <0x0200000 0x600000>; /* 6MB */
+ };
+
+ partition@800000 {
+ label = "minirootfs";
+ reg = <0x0800000 0x400000>; /* 4MB */
+ };
+
+ /* Last MB is for the BBT, i.e. not writable */
+ partition@c00000 {
+ label = "ubifs";
+ reg = <0x0c00000 0x7400000>; /* 116MB */
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/armada-370-rd.dts b/arch/arm/boot/dts/armada-370-rd.dts
index cc2f774eb267..2bfb3108b5b2 100644
--- a/arch/arm/boot/dts/armada-370-rd.dts
+++ b/arch/arm/boot/dts/armada-370-rd.dts
@@ -112,27 +112,6 @@
default-state = "keep";
};
};
-
- nand@d0000 {
- status = "okay";
- num-cs = <1>;
- marvell,nand-keep-config;
- marvell,nand-enable-arbiter;
- nand-on-flash-bbt;
-
- partition@0 {
- label = "U-Boot";
- reg = <0 0x800000>;
- };
- partition@800000 {
- label = "Linux";
- reg = <0x800000 0x800000>;
- };
- partition@1000000 {
- label = "Filesystem";
- reg = <0x1000000 0x3f000000>;
- };
- };
};
};
@@ -288,3 +267,34 @@
marvell,function = "gpio";
};
};
+
+&nand_controller {
+ status = "okay";
+
+ nand@0 {
+ reg = <0>;
+ label = "pxa3xx_nand-0";
+ nand-rb = <0>;
+ marvell,nand-keep-config;
+ nand-on-flash-bbt;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "U-Boot";
+ reg = <0 0x800000>;
+ };
+ partition@800000 {
+ label = "Linux";
+ reg = <0x800000 0x800000>;
+ };
+ partition@1000000 {
+ label = "Filesystem";
+ reg = <0x1000000 0x3f000000>;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi b/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi
index a5206db0ebbd..b52634ecf1d9 100644
--- a/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi
+++ b/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi
@@ -66,33 +66,6 @@
interrupts = <110>;
};
};
-
- nand@d0000 {
- status = "okay";
- num-cs = <1>;
- marvell,nand-keep-config;
- marvell,nand-enable-arbiter;
- nand-on-flash-bbt;
- nand-ecc-strength = <4>;
- nand-ecc-step-size = <512>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x300000>;
- };
- partition@300000 {
- label = "device-tree";
- reg = <0x300000 0x20000>;
- };
- partition@320000 {
- label = "linux";
- reg = <0x320000 0x2000000>;
- };
- partition@2320000 {
- label = "rootfs";
- reg = <0x2320000 0xdce0000>;
- };
- };
};
};
@@ -227,3 +200,40 @@
marvell,function = "gpio";
};
};
+
+&nand_controller {
+ status = "okay";
+
+ nand@0 {
+ reg = <0>;
+ label = "pxa3xx_nand-0";
+ nand-rb = <0>;
+ marvell,nand-keep-config;
+ nand-on-flash-bbt;
+ nand-ecc-strength = <4>;
+ nand-ecc-step-size = <512>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x300000>;
+ };
+ partition@300000 {
+ label = "device-tree";
+ reg = <0x300000 0x20000>;
+ };
+ partition@320000 {
+ label = "linux";
+ reg = <0x320000 0x2000000>;
+ };
+ partition@2320000 {
+ label = "rootfs";
+ reg = <0x2320000 0xdce0000>;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi
index 11fc3271dad4..c15f5e92f97f 100644
--- a/arch/arm/boot/dts/armada-370-xp.dtsi
+++ b/arch/arm/boot/dts/armada-370-xp.dtsi
@@ -244,11 +244,11 @@
status = "disabled";
};
- nand: nand@d0000 {
- compatible = "marvell,armada370-nand";
+ nand_controller: nand-controller@d0000 {
+ compatible = "marvell,armada370-nand-controller";
reg = <0xd0000 0x54>;
#address-cells = <1>;
- #size-cells = <1>;
+ #size-cells = <0>;
interrupts = <113>;
clocks = <&coredivclk 0>;
status = "disabled";
diff --git a/arch/arm/boot/dts/armada-375-db.dts b/arch/arm/boot/dts/armada-375-db.dts
index e4ecd7e75644..0e679465cbb5 100644
--- a/arch/arm/boot/dts/armada-375-db.dts
+++ b/arch/arm/boot/dts/armada-375-db.dts
@@ -103,28 +103,38 @@
nr-ports = <2>;
};
-&nand {
+&nand_controller {
+ status = "okay";
pinctrl-0 = <&nand_pins>;
pinctrl-names = "default";
- status = "okay";
- num-cs = <1>;
- marvell,nand-keep-config;
- marvell,nand-enable-arbiter;
- nand-on-flash-bbt;
- nand-ecc-strength = <4>;
- nand-ecc-step-size = <512>;
-
- partition@0 {
- label = "U-Boot";
- reg = <0 0x800000>;
- };
- partition@800000 {
- label = "Linux";
- reg = <0x800000 0x800000>;
- };
- partition@1000000 {
- label = "Filesystem";
- reg = <0x1000000 0x3f000000>;
+
+ nand@0 {
+ reg = <0>;
+ label = "pxa3xx_nand-0";
+ nand-rb = <0>;
+ marvell,nand-keep-config;
+ nand-on-flash-bbt;
+ nand-ecc-strength = <4>;
+ nand-ecc-step-size = <512>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "U-Boot";
+ reg = <0 0x800000>;
+ };
+ partition@800000 {
+ label = "Linux";
+ reg = <0x800000 0x800000>;
+ };
+ partition@1000000 {
+ label = "Filesystem";
+ reg = <0x1000000 0x3f000000>;
+ };
+ };
};
};
diff --git a/arch/arm/boot/dts/armada-375.dtsi b/arch/arm/boot/dts/armada-375.dtsi
index 53ead6f26a0e..2932a29ae272 100644
--- a/arch/arm/boot/dts/armada-375.dtsi
+++ b/arch/arm/boot/dts/armada-375.dtsi
@@ -502,11 +502,11 @@
status = "disabled";
};
- nand: nand@d0000 {
- compatible = "marvell,armada370-nand";
+ nand_controller: nand-controller@d0000 {
+ compatible = "marvell,armada370-nand-controller";
reg = <0xd0000 0x54>;
#address-cells = <1>;
- #size-cells = <1>;
+ #size-cells = <0>;
interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gateclk 11>;
status = "disabled";
diff --git a/arch/arm/boot/dts/armada-385-db-ap.dts b/arch/arm/boot/dts/armada-385-db-ap.dts
index d294f24281a5..0e4613bb56ee 100644
--- a/arch/arm/boot/dts/armada-385-db-ap.dts
+++ b/arch/arm/boot/dts/armada-385-db-ap.dts
@@ -135,39 +135,6 @@
status = "okay";
};
- nfc: flash@d0000 {
- status = "okay";
- num-cs = <1>;
- nand-ecc-strength = <4>;
- nand-ecc-step-size = <512>;
- marvell,nand-keep-config;
- marvell,nand-enable-arbiter;
- nand-on-flash-bbt;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "U-Boot";
- reg = <0x00000000 0x00800000>;
- read-only;
- };
-
- partition@800000 {
- label = "uImage";
- reg = <0x00800000 0x00400000>;
- read-only;
- };
-
- partition@c00000 {
- label = "Root";
- reg = <0x00c00000 0x3f400000>;
- };
- };
- };
-
usb3@f0000 {
status = "okay";
usb-phy = <&usb3_phy>;
@@ -233,3 +200,39 @@
spi-max-frequency = <54000000>;
};
};
+
+&nand_controller {
+ status = "okay";
+
+ nand@0 {
+ reg = <0>;
+ label = "pxa3xx_nand-0";
+ nand-rb = <0>;
+ nand-on-flash-bbt;
+ nand-ecc-strength = <4>;
+ nand-ecc-step-size = <512>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "U-Boot";
+ reg = <0x00000000 0x00800000>;
+ read-only;
+ };
+
+ partition@800000 {
+ label = "uImage";
+ reg = <0x00800000 0x00400000>;
+ read-only;
+ };
+
+ partition@c00000 {
+ label = "Root";
+ reg = <0x00c00000 0x3f400000>;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/armada-385-linksys-caiman.dts b/arch/arm/boot/dts/armada-385-linksys-caiman.dts
index 1f30993af405..a03050c97084 100644
--- a/arch/arm/boot/dts/armada-385-linksys-caiman.dts
+++ b/arch/arm/boot/dts/armada-385-linksys-caiman.dts
@@ -73,67 +73,72 @@
&nand {
/* 128MiB */
-
- partition@0 {
- label = "u-boot";
- reg = <0x0000000 0x200000>; /* 2MiB */
- read-only;
- };
-
- partition@100000 {
- label = "u_env";
- reg = <0x200000 0x40000>; /* 256KiB */
- };
-
- partition@140000 {
- label = "s_env";
- reg = <0x240000 0x40000>; /* 256KiB */
- };
-
- partition@900000 {
- label = "devinfo";
- reg = <0x900000 0x100000>; /* 1MiB */
- read-only;
- };
-
- /* kernel1 overlaps with rootfs1 by design */
- partition@a00000 {
- label = "kernel1";
- reg = <0xa00000 0x2800000>; /* 40MiB */
- };
-
- partition@1000000 {
- label = "rootfs1";
- reg = <0x1000000 0x2200000>; /* 34MiB */
- };
-
- /* kernel2 overlaps with rootfs2 by design */
- partition@3200000 {
- label = "kernel2";
- reg = <0x3200000 0x2800000>; /* 40MiB */
- };
-
- partition@3800000 {
- label = "rootfs2";
- reg = <0x3800000 0x2200000>; /* 34MiB */
- };
-
- /*
- * 38MiB, last MiB is for the BBT, not writable
- */
- partition@5a00000 {
- label = "syscfg";
- reg = <0x5a00000 0x2600000>;
- };
-
- /*
- * Unused area between "s_env" and "devinfo".
- * Moved here because otherwise the renumbered
- * partitions would break the bootloader
- * supplied bootargs
- */
- partition@180000 {
- label = "unused_area";
- reg = <0x280000 0x680000>; /* 6.5MiB */
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0000000 0x200000>; /* 2MiB */
+ read-only;
+ };
+
+ partition@100000 {
+ label = "u_env";
+ reg = <0x200000 0x40000>; /* 256KiB */
+ };
+
+ partition@140000 {
+ label = "s_env";
+ reg = <0x240000 0x40000>; /* 256KiB */
+ };
+
+ partition@900000 {
+ label = "devinfo";
+ reg = <0x900000 0x100000>; /* 1MiB */
+ read-only;
+ };
+
+ /* kernel1 overlaps with rootfs1 by design */
+ partition@a00000 {
+ label = "kernel1";
+ reg = <0xa00000 0x2800000>; /* 40MiB */
+ };
+
+ partition@1000000 {
+ label = "rootfs1";
+ reg = <0x1000000 0x2200000>; /* 34MiB */
+ };
+
+ /* kernel2 overlaps with rootfs2 by design */
+ partition@3200000 {
+ label = "kernel2";
+ reg = <0x3200000 0x2800000>; /* 40MiB */
+ };
+
+ partition@3800000 {
+ label = "rootfs2";
+ reg = <0x3800000 0x2200000>; /* 34MiB */
+ };
+
+ /*
+ * 38MiB, last MiB is for the BBT, not writable
+ */
+ partition@5a00000 {
+ label = "syscfg";
+ reg = <0x5a00000 0x2600000>;
+ };
+
+ /*
+ * Unused area between "s_env" and "devinfo".
+ * Moved here because otherwise the renumbered
+ * partitions would break the bootloader
+ * supplied bootargs
+ */
+ partition@180000 {
+ label = "unused_area";
+ reg = <0x280000 0x680000>; /* 6.5MiB */
+ };
};
};
diff --git a/arch/arm/boot/dts/armada-385-linksys-cobra.dts b/arch/arm/boot/dts/armada-385-linksys-cobra.dts
index bc34802ce6bc..e3e4877a6f49 100644
--- a/arch/arm/boot/dts/armada-385-linksys-cobra.dts
+++ b/arch/arm/boot/dts/armada-385-linksys-cobra.dts
@@ -73,67 +73,72 @@
&nand {
/* 128MiB */
-
- partition@0 {
- label = "u-boot";
- reg = <0x0000000 0x200000>; /* 2MiB */
- read-only;
- };
-
- partition@100000 {
- label = "u_env";
- reg = <0x200000 0x40000>; /* 256KiB */
- };
-
- partition@140000 {
- label = "s_env";
- reg = <0x240000 0x40000>; /* 256KiB */
- };
-
- partition@900000 {
- label = "devinfo";
- reg = <0x900000 0x100000>; /* 1MiB */
- read-only;
- };
-
- /* kernel1 overlaps with rootfs1 by design */
- partition@a00000 {
- label = "kernel1";
- reg = <0xa00000 0x2800000>; /* 40MiB */
- };
-
- partition@1000000 {
- label = "rootfs1";
- reg = <0x1000000 0x2200000>; /* 34MiB */
- };
-
- /* kernel2 overlaps with rootfs2 by design */
- partition@3200000 {
- label = "kernel2";
- reg = <0x3200000 0x2800000>; /* 40MiB */
- };
-
- partition@3800000 {
- label = "rootfs2";
- reg = <0x3800000 0x2200000>; /* 34MiB */
- };
-
- /*
- * 38MiB, last MiB is for the BBT, not writable
- */
- partition@5a00000 {
- label = "syscfg";
- reg = <0x5a00000 0x2600000>;
- };
-
- /*
- * Unused area between "s_env" and "devinfo".
- * Moved here because otherwise the renumbered
- * partitions would break the bootloader
- * supplied bootargs
- */
- partition@180000 {
- label = "unused_area";
- reg = <0x280000 0x680000>; /* 6.5MiB */
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0000000 0x200000>; /* 2MiB */
+ read-only;
+ };
+
+ partition@100000 {
+ label = "u_env";
+ reg = <0x200000 0x40000>; /* 256KiB */
+ };
+
+ partition@140000 {
+ label = "s_env";
+ reg = <0x240000 0x40000>; /* 256KiB */
+ };
+
+ partition@900000 {
+ label = "devinfo";
+ reg = <0x900000 0x100000>; /* 1MiB */
+ read-only;
+ };
+
+ /* kernel1 overlaps with rootfs1 by design */
+ partition@a00000 {
+ label = "kernel1";
+ reg = <0xa00000 0x2800000>; /* 40MiB */
+ };
+
+ partition@1000000 {
+ label = "rootfs1";
+ reg = <0x1000000 0x2200000>; /* 34MiB */
+ };
+
+ /* kernel2 overlaps with rootfs2 by design */
+ partition@3200000 {
+ label = "kernel2";
+ reg = <0x3200000 0x2800000>; /* 40MiB */
+ };
+
+ partition@3800000 {
+ label = "rootfs2";
+ reg = <0x3800000 0x2200000>; /* 34MiB */
+ };
+
+ /*
+ * 38MiB, last MiB is for the BBT, not writable
+ */
+ partition@5a00000 {
+ label = "syscfg";
+ reg = <0x5a00000 0x2600000>;
+ };
+
+ /*
+ * Unused area between "s_env" and "devinfo".
+ * Moved here because otherwise the renumbered
+ * partitions would break the bootloader
+ * supplied bootargs
+ */
+ partition@180000 {
+ label = "unused_area";
+ reg = <0x280000 0x680000>; /* 6.5MiB */
+ };
};
};
diff --git a/arch/arm/boot/dts/armada-385-linksys-rango.dts b/arch/arm/boot/dts/armada-385-linksys-rango.dts
index 5b745a0ccce5..3c4af57ec2b9 100644
--- a/arch/arm/boot/dts/armada-385-linksys-rango.dts
+++ b/arch/arm/boot/dts/armada-385-linksys-rango.dts
@@ -81,74 +81,79 @@
&nand {
/* AMD/Spansion S34ML02G2 256MiB, OEM Layout */
-
- partition@0 {
- label = "u-boot";
- reg = <0x0000000 0x200000>; /* 2MiB */
- read-only;
- };
-
- partition@200000 {
- label = "u_env";
- reg = <0x200000 0x20000>; /* 128KiB */
- };
-
- partition@220000 {
- label = "s_env";
- reg = <0x220000 0x40000>; /* 256KiB */
- };
-
- partition@7e0000 {
- label = "devinfo";
- reg = <0x7e0000 0x40000>; /* 256KiB */
- read-only;
- };
-
- partition@820000 {
- label = "sysdiag";
- reg = <0x820000 0x1e0000>; /* 1920KiB */
- read-only;
- };
-
- /* kernel1 overlaps with rootfs1 by design */
- partition@a00000 {
- label = "kernel1";
- reg = <0xa00000 0x5000000>; /* 80MiB */
- };
-
- partition@1000000 {
- label = "rootfs1";
- reg = <0x1000000 0x4a00000>; /* 74MiB */
- };
-
- /* kernel2 overlaps with rootfs2 by design */
- partition@5a00000 {
- label = "kernel2";
- reg = <0x5a00000 0x5000000>; /* 80MiB */
- };
-
- partition@6000000 {
- label = "rootfs2";
- reg = <0x6000000 0x4a00000>; /* 74MiB */
- };
-
- /*
- * 86MiB, last MiB is for the BBT, not writable
- */
- partition@aa00000 {
- label = "syscfg";
- reg = <0xaa00000 0x5600000>;
- };
-
- /*
- * Unused area between "s_env" and "devinfo".
- * Moved here because otherwise the renumbered
- * partitions would break the bootloader
- * supplied bootargs
- */
- partition@180000 {
- label = "unused_area";
- reg = <0x260000 0x5c0000>; /* 5.75MiB */
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0000000 0x200000>; /* 2MiB */
+ read-only;
+ };
+
+ partition@200000 {
+ label = "u_env";
+ reg = <0x200000 0x20000>; /* 128KiB */
+ };
+
+ partition@220000 {
+ label = "s_env";
+ reg = <0x220000 0x40000>; /* 256KiB */
+ };
+
+ partition@7e0000 {
+ label = "devinfo";
+ reg = <0x7e0000 0x40000>; /* 256KiB */
+ read-only;
+ };
+
+ partition@820000 {
+ label = "sysdiag";
+ reg = <0x820000 0x1e0000>; /* 1920KiB */
+ read-only;
+ };
+
+ /* kernel1 overlaps with rootfs1 by design */
+ partition@a00000 {
+ label = "kernel1";
+ reg = <0xa00000 0x5000000>; /* 80MiB */
+ };
+
+ partition@1000000 {
+ label = "rootfs1";
+ reg = <0x1000000 0x4a00000>; /* 74MiB */
+ };
+
+ /* kernel2 overlaps with rootfs2 by design */
+ partition@5a00000 {
+ label = "kernel2";
+ reg = <0x5a00000 0x5000000>; /* 80MiB */
+ };
+
+ partition@6000000 {
+ label = "rootfs2";
+ reg = <0x6000000 0x4a00000>; /* 74MiB */
+ };
+
+ /*
+ * 86MiB, last MiB is for the BBT, not writable
+ */
+ partition@aa00000 {
+ label = "syscfg";
+ reg = <0xaa00000 0x5600000>;
+ };
+
+ /*
+ * Unused area between "s_env" and "devinfo".
+ * Moved here because otherwise the renumbered
+ * partitions would break the bootloader
+ * supplied bootargs
+ */
+ partition@180000 {
+ label = "unused_area";
+ reg = <0x260000 0x5c0000>; /* 5.75MiB */
+ };
};
};
diff --git a/arch/arm/boot/dts/armada-385-linksys-shelby.dts b/arch/arm/boot/dts/armada-385-linksys-shelby.dts
index 44f5aeb5fc33..3451cd3e5dff 100644
--- a/arch/arm/boot/dts/armada-385-linksys-shelby.dts
+++ b/arch/arm/boot/dts/armada-385-linksys-shelby.dts
@@ -73,67 +73,72 @@
&nand {
/* 128MiB */
-
- partition@0 {
- label = "u-boot";
- reg = <0x0000000 0x200000>; /* 2MiB */
- read-only;
- };
-
- partition@100000 {
- label = "u_env";
- reg = <0x200000 0x40000>; /* 256KiB */
- };
-
- partition@140000 {
- label = "s_env";
- reg = <0x240000 0x40000>; /* 256KiB */
- };
-
- partition@900000 {
- label = "devinfo";
- reg = <0x900000 0x100000>; /* 1MiB */
- read-only;
- };
-
- /* kernel1 overlaps with rootfs1 by design */
- partition@a00000 {
- label = "kernel1";
- reg = <0xa00000 0x2800000>; /* 40MiB */
- };
-
- partition@1000000 {
- label = "rootfs1";
- reg = <0x1000000 0x2200000>; /* 34MiB */
- };
-
- /* kernel2 overlaps with rootfs2 by design */
- partition@3200000 {
- label = "kernel2";
- reg = <0x3200000 0x2800000>; /* 40MiB */
- };
-
- partition@3800000 {
- label = "rootfs2";
- reg = <0x3800000 0x2200000>; /* 34MiB */
- };
-
- /*
- * 38MiB, last MiB is for the BBT, not writable
- */
- partition@5a00000 {
- label = "syscfg";
- reg = <0x5a00000 0x2600000>;
- };
-
- /*
- * Unused area between "s_env" and "devinfo".
- * Moved here because otherwise the renumbered
- * partitions would break the bootloader
- * supplied bootargs
- */
- partition@180000 {
- label = "unused_area";
- reg = <0x280000 0x680000>; /* 6.5MiB */
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0000000 0x200000>; /* 2MiB */
+ read-only;
+ };
+
+ partition@100000 {
+ label = "u_env";
+ reg = <0x200000 0x40000>; /* 256KiB */
+ };
+
+ partition@140000 {
+ label = "s_env";
+ reg = <0x240000 0x40000>; /* 256KiB */
+ };
+
+ partition@900000 {
+ label = "devinfo";
+ reg = <0x900000 0x100000>; /* 1MiB */
+ read-only;
+ };
+
+ /* kernel1 overlaps with rootfs1 by design */
+ partition@a00000 {
+ label = "kernel1";
+ reg = <0xa00000 0x2800000>; /* 40MiB */
+ };
+
+ partition@1000000 {
+ label = "rootfs1";
+ reg = <0x1000000 0x2200000>; /* 34MiB */
+ };
+
+ /* kernel2 overlaps with rootfs2 by design */
+ partition@3200000 {
+ label = "kernel2";
+ reg = <0x3200000 0x2800000>; /* 40MiB */
+ };
+
+ partition@3800000 {
+ label = "rootfs2";
+ reg = <0x3800000 0x2200000>; /* 34MiB */
+ };
+
+ /*
+ * 38MiB, last MiB is for the BBT, not writable
+ */
+ partition@5a00000 {
+ label = "syscfg";
+ reg = <0x5a00000 0x2600000>;
+ };
+
+ /*
+ * Unused area between "s_env" and "devinfo".
+ * Moved here because otherwise the renumbered
+ * partitions would break the bootloader
+ * supplied bootargs
+ */
+ partition@180000 {
+ label = "unused_area";
+ reg = <0x280000 0x680000>; /* 6.5MiB */
+ };
};
};
diff --git a/arch/arm/boot/dts/armada-385-linksys.dtsi b/arch/arm/boot/dts/armada-385-linksys.dtsi
index 4a0d7360110b..827e82be2201 100644
--- a/arch/arm/boot/dts/armada-385-linksys.dtsi
+++ b/arch/arm/boot/dts/armada-385-linksys.dtsi
@@ -138,13 +138,19 @@
};
};
-&nand {
+&nand_controller {
/* 128MiB or 256MiB */
status = "okay";
- num-cs = <1>;
- marvell,nand-keep-config;
- marvell,nand-enable-arbiter;
- nand-on-flash-bbt;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ nand: nand@0 {
+ reg = <0>;
+ label = "pxa3xx_nand-0";
+ nand-rb = <0>;
+ marvell,nand-keep-config;
+ nand-on-flash-bbt;
+ };
};
&mdio {
diff --git a/arch/arm/boot/dts/armada-388-db.dts b/arch/arm/boot/dts/armada-388-db.dts
index 05250d426dc4..a2bec07bf4c5 100644
--- a/arch/arm/boot/dts/armada-388-db.dts
+++ b/arch/arm/boot/dts/armada-388-db.dts
@@ -91,29 +91,6 @@
status = "okay";
};
- flash@d0000 {
- status = "okay";
- num-cs = <1>;
- marvell,nand-keep-config;
- marvell,nand-enable-arbiter;
- nand-on-flash-bbt;
- nand-ecc-strength = <4>;
- nand-ecc-step-size = <512>;
-
- partition@0 {
- label = "U-Boot";
- reg = <0 0x800000>;
- };
- partition@800000 {
- label = "Linux";
- reg = <0x800000 0x800000>;
- };
- partition@1000000 {
- label = "Filesystem";
- reg = <0x1000000 0x3f000000>;
- };
- };
-
sdhci@d8000 {
broken-cd;
wp-inverted;
@@ -165,3 +142,35 @@
};
};
+&nand_controller {
+ status = "okay";
+
+ nand@0 {
+ reg = <0>;
+ label = "pxa3xx_nand-0";
+ nand-rb = <0>;
+ marvell,nand-keep-config;
+ nand-on-flash-bbt;
+ nand-ecc-strength = <4>;
+ nand-ecc-step-size = <512>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "U-Boot";
+ reg = <0 0x800000>;
+ };
+ partition@800000 {
+ label = "Linux";
+ reg = <0x800000 0x800000>;
+ };
+ partition@1000000 {
+ label = "Filesystem";
+ reg = <0x1000000 0x3f000000>;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi
index 6916d7532ad2..18edc9bc7927 100644
--- a/arch/arm/boot/dts/armada-38x.dtsi
+++ b/arch/arm/boot/dts/armada-38x.dtsi
@@ -551,11 +551,11 @@
status = "okay";
};
- nand: flash@d0000 {
- compatible = "marvell,armada370-nand";
+ nand_controller: nand-controller@d0000 {
+ compatible = "marvell,armada370-nand-controller";
reg = <0xd0000 0x54>;
#address-cells = <1>;
- #size-cells = <1>;
+ #size-cells = <0>;
interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&coredivclk 0>;
status = "disabled";
diff --git a/arch/arm/boot/dts/armada-390-db.dts b/arch/arm/boot/dts/armada-390-db.dts
index 1b2362e4c831..0e29474ae9a2 100644
--- a/arch/arm/boot/dts/armada-390-db.dts
+++ b/arch/arm/boot/dts/armada-390-db.dts
@@ -49,37 +49,6 @@
status = "okay";
};
- flash@d0000 {
- status = "okay";
- pinctrl-0 = <&nand_pins>;
- pinctrl-names = "default";
- num-cs = <1>;
- marvell,nand-keep-config;
- marvell,nand-enable-arbiter;
- nand-on-flash-bbt;
- nand-ecc-strength = <8>;
- nand-ecc-step-size = <512>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "U-Boot";
- reg = <0 0x800000>;
- };
- partition@800000 {
- label = "Linux";
- reg = <0x800000 0x800000>;
- };
- partition@1000000 {
- label = "Filesystem";
- reg = <0x1000000 0x3f000000>;
- };
- };
- };
-
/* CON98 */
usb3@f8000 {
status = "okay";
@@ -136,3 +105,38 @@
};
};
};
+
+&nand_controller {
+ status = "okay";
+ pinctrl-0 = <&nand_pins>;
+ pinctrl-names = "default";
+
+ nand@0 {
+ reg = <0>;
+ label = "pxa3xx_nand-0";
+ nand-rb = <0>;
+ marvell,nand-keep-config;
+ nand-on-flash-bbt;
+ nand-ecc-strength = <8>;
+ nand-ecc-step-size = <512>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "U-Boot";
+ reg = <0 0x800000>;
+ };
+ partition@800000 {
+ label = "Linux";
+ reg = <0x800000 0x800000>;
+ };
+ partition@1000000 {
+ label = "Filesystem";
+ reg = <0x1000000 0x3f000000>;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/armada-395-gp.dts b/arch/arm/boot/dts/armada-395-gp.dts
index 2a9de192b423..6dd9e9077f84 100644
--- a/arch/arm/boot/dts/armada-395-gp.dts
+++ b/arch/arm/boot/dts/armada-395-gp.dts
@@ -57,41 +57,6 @@
status = "okay";
};
- flash@d0000 {
- status = "okay";
- pinctrl-0 = <&nand_pins>;
- pinctrl-names = "default";
- num-cs = <1>;
- marvell,nand-keep-config;
- marvell,nand-enable-arbiter;
- nand-on-flash-bbt;
- nand-ecc-strength = <4>;
- nand-ecc-step-size = <512>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "U-Boot";
- reg = <0x00000000 0x00600000>;
- read-only;
- };
-
- partition@800000 {
- label = "uImage";
- reg = <0x00600000 0x00400000>;
- read-only;
- };
-
- partition@1000000 {
- label = "Root";
- reg = <0x00a00000 0x3f600000>;
- };
- };
- };
-
/* CON18 */
sdhci@d8000 {
clock-frequency = <200000000>;
@@ -130,3 +95,42 @@
};
};
};
+
+&nand_controller {
+ status = "okay";
+ pinctrl-0 = <&nand_pins>;
+ pinctrl-names = "default";
+
+ nand@0 {
+ reg = <0>;
+ label = "pxa3xx_nand-0";
+ nand-rb = <0>;
+ marvell,nand-keep-config;
+ nand-on-flash-bbt;
+ nand-ecc-strength = <4>;
+ nand-ecc-step-size = <512>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "U-Boot";
+ reg = <0x00000000 0x00600000>;
+ read-only;
+ };
+
+ partition@800000 {
+ label = "uImage";
+ reg = <0x00600000 0x00400000>;
+ read-only;
+ };
+
+ partition@1000000 {
+ label = "Root";
+ reg = <0x00a00000 0x3f600000>;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/armada-398-db.dts b/arch/arm/boot/dts/armada-398-db.dts
index 2337f24784f7..fc28308e5bc5 100644
--- a/arch/arm/boot/dts/armada-398-db.dts
+++ b/arch/arm/boot/dts/armada-398-db.dts
@@ -51,31 +51,6 @@
status = "okay";
};
- flash@d0000 {
- status = "okay";
- pinctrl-0 = <&nand_pins>;
- pinctrl-names = "default";
- num-cs = <1>;
- marvell,nand-keep-config;
- marvell,nand-enable-arbiter;
- nand-on-flash-bbt;
- nand-ecc-strength = <8>;
- nand-ecc-step-size = <512>;
-
- partition@0 {
- label = "U-Boot";
- reg = <0 0x800000>;
- };
- partition@800000 {
- label = "Linux";
- reg = <0x800000 0x800000>;
- };
- partition@1000000 {
- label = "Filesystem";
- reg = <0x1000000 0x3f000000>;
- };
- };
-
usb3@f8000 {
status = "okay";
};
@@ -122,3 +97,38 @@
};
};
};
+
+&nand_controller {
+ status = "okay";
+ pinctrl-0 = <&nand_pins>;
+ pinctrl-names = "default";
+
+ nand@0 {
+ reg = <0>;
+ label = "pxa3xx_nand-0";
+ nand-rb = <0>;
+ marvell,nand-keep-config;
+ nand-on-flash-bbt;
+ nand-ecc-strength = <8>;
+ nand-ecc-step-size = <512>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "U-Boot";
+ reg = <0 0x800000>;
+ };
+ partition@800000 {
+ label = "Linux";
+ reg = <0x800000 0x800000>;
+ };
+ partition@1000000 {
+ label = "Filesystem";
+ reg = <0x1000000 0x3f000000>;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/armada-39x.dtsi b/arch/arm/boot/dts/armada-39x.dtsi
index c1737c0a8325..f0c949831efb 100644
--- a/arch/arm/boot/dts/armada-39x.dtsi
+++ b/arch/arm/boot/dts/armada-39x.dtsi
@@ -367,11 +367,11 @@
interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
};
- flash@d0000 {
- compatible = "marvell,armada370-nand";
+ nand_controller: nand-controller@d0000 {
+ compatible = "marvell,armada370-nand-controller";
reg = <0xd0000 0x54>;
#address-cells = <1>;
- #size-cells = <1>;
+ #size-cells = <0>;
interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&coredivclk 0>;
status = "disabled";
diff --git a/arch/arm/boot/dts/armada-xp-98dx3236.dtsi b/arch/arm/boot/dts/armada-xp-98dx3236.dtsi
index a5da44fb35ed..8d708cc22495 100644
--- a/arch/arm/boot/dts/armada-xp-98dx3236.dtsi
+++ b/arch/arm/boot/dts/armada-xp-98dx3236.dtsi
@@ -306,6 +306,19 @@
&pinctrl {
compatible = "marvell,98dx3236-pinctrl";
+ nand_pins: nand-pins {
+ marvell,pins = "mpp20", "mpp21", "mpp22",
+ "mpp23", "mpp24", "mpp25",
+ "mpp26", "mpp27", "mpp28",
+ "mpp29", "mpp30";
+ marvell,function = "dev";
+ };
+
+ nand_rb: nand-rb {
+ marvell,pins = "mpp19";
+ marvell,function = "nand";
+ };
+
spi0_pins: spi0-pins {
marvell,pins = "mpp0", "mpp1",
"mpp2", "mpp3";
diff --git a/arch/arm/boot/dts/armada-xp-db-dxbc2.dts b/arch/arm/boot/dts/armada-xp-db-dxbc2.dts
index 4c64923f1c52..f42fc6118b7c 100644
--- a/arch/arm/boot/dts/armada-xp-db-dxbc2.dts
+++ b/arch/arm/boot/dts/armada-xp-db-dxbc2.dts
@@ -70,9 +70,9 @@
&nand {
status = "okay";
+ label = "pxa3xx_nand-0";
num-cs = <1>;
marvell,nand-keep-config;
- marvell,nand-enable-arbiter;
nand-on-flash-bbt;
nand-ecc-strength = <4>;
nand-ecc-step-size = <512>;
diff --git a/arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts b/arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts
index a0ebb52683f1..8432f517e346 100644
--- a/arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts
+++ b/arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts
@@ -69,9 +69,9 @@
&nand {
status = "okay";
+ label = "pxa3xx_nand-0";
num-cs = <1>;
marvell,nand-keep-config;
- marvell,nand-enable-arbiter;
nand-on-flash-bbt;
nand-ecc-strength = <4>;
nand-ecc-step-size = <512>;
diff --git a/arch/arm/boot/dts/armada-xp-db.dts b/arch/arm/boot/dts/armada-xp-db.dts
index 73d3f5cb9828..f3ac7483afed 100644
--- a/arch/arm/boot/dts/armada-xp-db.dts
+++ b/arch/arm/boot/dts/armada-xp-db.dts
@@ -146,9 +146,9 @@
nand@d0000 {
status = "okay";
+ label = "pxa3xx_nand-0";
num-cs = <1>;
marvell,nand-keep-config;
- marvell,nand-enable-arbiter;
nand-on-flash-bbt;
partitions {
diff --git a/arch/arm/boot/dts/armada-xp-gp.dts b/arch/arm/boot/dts/armada-xp-gp.dts
index c143556bbb7b..1139e9469a83 100644
--- a/arch/arm/boot/dts/armada-xp-gp.dts
+++ b/arch/arm/boot/dts/armada-xp-gp.dts
@@ -162,9 +162,9 @@
nand@d0000 {
status = "okay";
+ label = "pxa3xx_nand-0";
num-cs = <1>;
marvell,nand-keep-config;
- marvell,nand-enable-arbiter;
nand-on-flash-bbt;
};
};
diff --git a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts
index def62e9e835b..bbbb38888bb8 100644
--- a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts
+++ b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts
@@ -83,9 +83,9 @@
nand@d0000 {
status = "okay";
+ label = "pxa3xx_nand-0";
num-cs = <1>;
marvell,nand-keep-config;
- marvell,nand-enable-arbiter;
nand-on-flash-bbt;
partitions {
diff --git a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
index f8b60d937818..7a2606c3b62e 100644
--- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
@@ -165,79 +165,6 @@
bm@c8000 {
status = "okay";
};
-
- nand@d0000 {
- status = "okay";
- num-cs = <1>;
- marvell,nand-keep-config;
- marvell,nand-enable-arbiter;
- nand-on-flash-bbt;
- nand-ecc-strength = <4>;
- nand-ecc-step-size = <512>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0000000 0x100000>; /* 1MB */
- read-only;
- };
-
- partition@100000 {
- label = "u_env";
- reg = <0x100000 0x40000>; /* 256KB */
- };
-
- partition@140000 {
- label = "s_env";
- reg = <0x140000 0x40000>; /* 256KB */
- };
-
- partition@900000 {
- label = "devinfo";
- reg = <0x900000 0x100000>; /* 1MB */
- read-only;
- };
-
- /* kernel1 overlaps with rootfs1 by design */
- partition@a00000 {
- label = "kernel1";
- reg = <0xa00000 0x2800000>; /* 40MB */
- };
-
- partition@d00000 {
- label = "rootfs1";
- reg = <0xd00000 0x2500000>; /* 37MB */
- };
-
- /* kernel2 overlaps with rootfs2 by design */
- partition@3200000 {
- label = "kernel2";
- reg = <0x3200000 0x2800000>; /* 40MB */
- };
-
- partition@3500000 {
- label = "rootfs2";
- reg = <0x3500000 0x2500000>; /* 37MB */
- };
-
- /*
- * 38MB, last MB is for the BBT, not writable
- */
- partition@5a00000 {
- label = "syscfg";
- reg = <0x5a00000 0x2600000>;
- };
-
- /*
- * Unused area between "s_env" and "devinfo".
- * Moved here because otherwise the renumbered
- * partitions would break the bootloader
- * supplied bootargs
- */
- partition@180000 {
- label = "unused_area";
- reg = <0x180000 0x780000>; /* 7.5MB */
- };
- };
};
bm-bppi {
@@ -434,3 +361,86 @@
};
};
};
+
+&nand_controller {
+ status = "okay";
+
+ nand@0 {
+ reg = <0>;
+ label = "pxa3xx_nand-0";
+ nand-rb = <0>;
+ marvell,nand-keep-config;
+ nand-on-flash-bbt;
+ nand-ecc-strength = <4>;
+ nand-ecc-step-size = <512>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0000000 0x100000>; /* 1MB */
+ read-only;
+ };
+
+ partition@100000 {
+ label = "u_env";
+ reg = <0x100000 0x40000>; /* 256KB */
+ };
+
+ partition@140000 {
+ label = "s_env";
+ reg = <0x140000 0x40000>; /* 256KB */
+ };
+
+ partition@900000 {
+ label = "devinfo";
+ reg = <0x900000 0x100000>; /* 1MB */
+ read-only;
+ };
+
+ /* kernel1 overlaps with rootfs1 by design */
+ partition@a00000 {
+ label = "kernel1";
+ reg = <0xa00000 0x2800000>; /* 40MB */
+ };
+
+ partition@d00000 {
+ label = "rootfs1";
+ reg = <0xd00000 0x2500000>; /* 37MB */
+ };
+
+ /* kernel2 overlaps with rootfs2 by design */
+ partition@3200000 {
+ label = "kernel2";
+ reg = <0x3200000 0x2800000>; /* 40MB */
+ };
+
+ partition@3500000 {
+ label = "rootfs2";
+ reg = <0x3500000 0x2500000>; /* 37MB */
+ };
+
+ /*
+ * 38MB, last MB is for the BBT, not writable
+ */
+ partition@5a00000 {
+ label = "syscfg";
+ reg = <0x5a00000 0x2600000>;
+ };
+
+ /*
+ * Unused area between "s_env" and "devinfo".
+ * Moved here because otherwise the renumbered
+ * partitions would break the bootloader
+ * supplied bootargs
+ */
+ partition@180000 {
+ label = "unused_area";
+ reg = <0x180000 0x780000>; /* 7.5MB */
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
index c350b1cf5201..8ea73587db81 100644
--- a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
+++ b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
@@ -117,46 +117,6 @@
nr-ports = <2>;
status = "okay";
};
-
- nand@d0000 {
- status = "okay";
- num-cs = <1>;
- marvell,nand-keep-config;
- marvell,nand-enable-arbiter;
- nand-on-flash-bbt;
-
- /* Use Hardware BCH ECC */
- nand-ecc-strength = <4>;
- nand-ecc-step-size = <512>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0000000 0x180000>; /* 1.5MB */
- read-only;
- };
-
- partition@180000 {
- label = "u-boot-env";
- reg = <0x180000 0x20000>; /* 128KB */
- read-only;
- };
-
- partition@200000 {
- label = "uImage";
- reg = <0x0200000 0x600000>; /* 6MB */
- };
-
- partition@800000 {
- label = "minirootfs";
- reg = <0x0800000 0x400000>; /* 4MB */
- };
-
- /* Last MB is for the BBT, i.e. not writable */
- partition@c00000 {
- label = "ubifs";
- reg = <0x0c00000 0x7400000>; /* 116MB */
- };
- };
};
};
@@ -345,3 +305,53 @@
marvell,function = "gpio";
};
};
+
+&nand_controller {
+ status = "okay";
+
+ nand@0 {
+ reg = <0>;
+ label = "pxa3xx_nand-0";
+ nand-rb = <0>;
+ marvell,nand-keep-config;
+ nand-on-flash-bbt;
+
+ /* Use Hardware BCH ECC */
+ nand-ecc-strength = <4>;
+ nand-ecc-step-size = <512>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0000000 0x180000>; /* 1.5MB */
+ read-only;
+ };
+
+ partition@180000 {
+ label = "u-boot-env";
+ reg = <0x180000 0x20000>; /* 128KB */
+ read-only;
+ };
+
+ partition@200000 {
+ label = "uImage";
+ reg = <0x0200000 0x600000>; /* 6MB */
+ };
+
+ partition@800000 {
+ label = "minirootfs";
+ reg = <0x0800000 0x400000>; /* 4MB */
+ };
+
+ /* Last MB is for the BBT, i.e. not writable */
+ partition@c00000 {
+ label = "ubifs";
+ reg = <0x0c00000 0x7400000>; /* 116MB */
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/aspeed-ast2500-evb.dts b/arch/arm/boot/dts/aspeed-ast2500-evb.dts
index 91a36c1f029b..ede11c597673 100644
--- a/arch/arm/boot/dts/aspeed-ast2500-evb.dts
+++ b/arch/arm/boot/dts/aspeed-ast2500-evb.dts
@@ -79,3 +79,21 @@
reg = <0x4d>;
};
};
+
+&ehci0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb2ah_default>;
+};
+
+&ehci1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb2bh_default>;
+};
+
+&uhci {
+ status = "okay";
+
+ /* No pinctrl, this follows the above EHCI settings */
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-intel-s2600wf.dts b/arch/arm/boot/dts/aspeed-bmc-intel-s2600wf.dts
new file mode 100644
index 000000000000..7a291de02543
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-intel-s2600wf.dts
@@ -0,0 +1,129 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2017 Intel Corporation
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+
+/ {
+ model = "S2600WF BMC";
+ compatible = "intel,s2600wf-bmc", "aspeed,ast2500";
+
+ chosen {
+ stdout-path = &uart5;
+ bootargs = "earlyprintk";
+ };
+
+ memory {
+ reg = <0x80000000 0x20000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ vga_memory: framebuffer@7f000000 {
+ no-map;
+ reg = <0x7f000000 0x01000000>;
+ };
+ };
+
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+ <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+ <&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
+ <&adc 12>, <&adc 13>, <&adc 14>, <&adc 15>;
+ };
+
+};
+
+&fmc {
+ status = "okay";
+ flash@0 {
+ status = "okay";
+ m25p,fast-read;
+ label = "bmc";
+#include "openbmc-flash-layout.dtsi"
+ };
+};
+
+&spi1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1_default>;
+
+ flash@0 {
+ status = "okay";
+ m25p,fast-read;
+ label = "pnor";
+ };
+};
+
+&uart5 {
+ status = "okay";
+};
+
+&mac0 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rmii1_default>;
+ use-ncsi;
+};
+
+&mac1 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&i2c1 {
+ status = "okay";
+};
+
+&i2c2 {
+ status = "okay";
+};
+
+&i2c3 {
+ status = "okay";
+};
+
+&i2c4 {
+ status = "okay";
+};
+
+&i2c5 {
+ status = "okay";
+};
+
+&i2c6 {
+ status = "okay";
+};
+
+&i2c7 {
+ status = "okay";
+};
+
+&i2c13 {
+ status = "okay";
+};
+
+&gfx {
+ status = "okay";
+};
+
+&pinctrl {
+ aspeed,external-nodes = <&gfx &lhc>;
+};
+
+&pwm_tacho {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
+ &pinctrl_pwm2_default &pinctrl_pwm3_default
+ &pinctrl_pwm4_default &pinctrl_pwm5_default
+ &pinctrl_pwm6_default &pinctrl_pwm7_default>;
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-lanyang.dts b/arch/arm/boot/dts/aspeed-bmc-opp-lanyang.dts
new file mode 100644
index 000000000000..d598b6391362
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-lanyang.dts
@@ -0,0 +1,325 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2018 Inventec Corporation
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+ model = "Lanyang BMC";
+ compatible = "inventec,lanyang-bmc", "aspeed,ast2500";
+
+ chosen {
+ stdout-path = &uart5;
+ bootargs = "console=ttyS4,115200 earlyprintk";
+ };
+
+ memory {
+ reg = <0x80000000 0x40000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ flash_memory: region@98000000 {
+ no-map;
+ reg = <0x98000000 0x04000000>; /* 64M */
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ sys_boot_status {
+ label = "System_boot_status";
+ gpios = <&gpio ASPEED_GPIO(B, 6) GPIO_ACTIVE_LOW>;
+ };
+
+ attention {
+ label = "Attention_locator";
+ gpios = <&gpio ASPEED_GPIO(B, 7) GPIO_ACTIVE_HIGH>;
+ };
+
+ plt_fault {
+ label = "Platform_fault";
+ gpios = <&gpio ASPEED_GPIO(B, 1) GPIO_ACTIVE_HIGH>;
+ };
+
+ hdd_fault {
+ label = "Onboard_drive_fault";
+ gpios = <&gpio ASPEED_GPIO(B, 3) GPIO_ACTIVE_HIGH>;
+ };
+ bmc_err {
+ lable = "BMC_fault";
+ gpios = <&gpio ASPEED_GPIO(H, 6) GPIO_ACTIVE_HIGH>;
+ };
+
+ sys_err {
+ lable = "Sys_fault";
+ gpios = <&gpio ASPEED_GPIO(H, 7) GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ fsi: gpio-fsi {
+ compatible = "fsi-master-gpio", "fsi-master";
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ clock-gpios = <&gpio ASPEED_GPIO(J, 0) GPIO_ACTIVE_HIGH>;
+ data-gpios = <&gpio ASPEED_GPIO(J, 1) GPIO_ACTIVE_HIGH>;
+ trans-gpios = <&gpio ASPEED_GPIO(D, 5) GPIO_ACTIVE_HIGH>;
+ enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
+ mux-gpios = <&gpio ASPEED_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
+ };
+
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+ <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+ <&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
+ <&adc 13>, <&adc 14>, <&adc 15>;
+ };
+
+ iio-hwmon-battery {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 12>;
+ };
+};
+
+&pwm_tacho {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
+ &pinctrl_pwm2_default &pinctrl_pwm3_default>;
+
+ fan@0 {
+ reg = <0x00>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+ };
+
+ fan@1 {
+ reg = <0x01>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+ };
+
+ fan@2 {
+ reg = <0x02>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+ };
+
+ fan@3 {
+ reg = <0x03>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x03>;
+ };
+};
+
+&fmc {
+ status = "okay";
+ flash@0 {
+ status = "okay";
+ m25p,fast-read;
+ label = "bmc";
+#include "openbmc-flash-layout.dtsi"
+ };
+};
+
+&spi1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1_default>;
+
+ flash@0 {
+ status = "okay";
+ label = "pnor";
+ m25p,fast-read;
+ };
+};
+
+&spi2 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi2ck_default
+ &pinctrl_spi2cs0_default
+ &pinctrl_spi2cs1_default
+ &pinctrl_spi2miso_default
+ &pinctrl_spi2mosi_default>;
+
+ flash@0 {
+ status = "okay";
+ };
+};
+
+&uart1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_txd1_default
+ &pinctrl_rxd1_default>;
+};
+
+&lpc_ctrl {
+ status = "okay";
+ memory-region = <&flash_memory>;
+ flash = <&spi1>;
+};
+
+&lpc_snoop {
+ status = "okay";
+ snoop-ports = <0x80>;
+};
+
+&uart5 {
+ status = "okay";
+};
+
+&mac0 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rmii1_default>;
+ use-ncsi;
+};
+
+&mac1 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&i2c0 {
+ status = "okay";
+
+ eeprom@55 {
+ compatible = "atmel,24c64";
+ reg = <0x55>;
+ pagesize = <32>;
+ };
+
+ rtc@68 {
+ compatible = "nxp,pcf8523";
+ reg = <0x68>;
+ };
+
+ tmp75@48 {
+ compatible = "ti,tmp75";
+ reg = <0x48>;
+ };
+};
+
+&i2c1 {
+ status = "okay";
+};
+
+&i2c2 {
+ status = "okay";
+};
+
+&i2c3 {
+ status = "okay";
+};
+
+&i2c4 {
+ status = "okay";
+};
+
+&i2c5 {
+ status = "okay";
+};
+
+&i2c6 {
+ status = "okay";
+};
+
+&i2c7 {
+ status = "okay";
+};
+
+&i2c8 {
+ status = "okay";
+};
+
+&i2c9 {
+ status = "okay";
+};
+
+&i2c10 {
+ status = "okay";
+};
+
+&i2c11 {
+ status = "okay";
+};
+
+&vuart {
+ status = "okay";
+};
+
+&gfx {
+ status = "okay";
+};
+
+&pinctrl {
+ aspeed,external-nodes = <&gfx &lhc>;
+};
+
+&gpio {
+ pin_gpio_b0 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(B, 0) GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "BMC_HDD1_PWR_EN";
+ };
+
+ pin_gpio_b5 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>;
+ input;
+ line-name = "BMC_USB1_OCI2";
+ };
+
+ pin_gpio_h5 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(H, 5) GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "BMC_CP0_PERST_ENABLE_R";
+ };
+
+ pin_gpio_z2 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(Z, 2) GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "RST_PCA9546_U177_N";
+ };
+
+ pin_gpio_aa6 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(AA, 6) GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "BMC_CP0_RESET_N";
+ };
+
+ pin_gpio_aa7 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(AA, 7) GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "BMC_TPM_RESET_N";
+ };
+
+ pin_gpio_ab0 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(AB, 0) GPIO_ACTIVE_LOW>;
+ output-high;
+ line-name = "BMC_USB_PWRON_N";
+ };
+};
+
+&ibt {
+ status = "okay";
+};
+
+&adc {
+ status = "okay";
+};
+
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts
index 51bc6a2e9dd5..389f5f83bef9 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts
@@ -68,6 +68,12 @@
gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(J, 2)>;
};
+
+ id-button {
+ label = "id-button";
+ gpios = <&gpio ASPEED_GPIO(Q, 7) GPIO_ACTIVE_LOW>;
+ linux,code = <ASPEED_GPIO(Q, 7)>;
+ };
};
};
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts b/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts
index 7056231cbee6..78a511e6e482 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts
@@ -28,6 +28,34 @@
};
};
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ air-water {
+ label = "air-water";
+ gpios = <&gpio ASPEED_GPIO(B, 5) GPIO_ACTIVE_LOW>;
+ linux,code = <ASPEED_GPIO(B, 5)>;
+ };
+
+ checkstop {
+ label = "checkstop";
+ gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
+ linux,code = <ASPEED_GPIO(J, 2)>;
+ };
+
+ ps0-presence {
+ label = "ps0-presence";
+ gpios = <&gpio ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
+ linux,code = <ASPEED_GPIO(P, 7)>;
+ };
+
+ ps1-presence {
+ label = "ps1-presence";
+ gpios = <&gpio ASPEED_GPIO(N, 0) GPIO_ACTIVE_LOW>;
+ linux,code = <ASPEED_GPIO(N, 0)>;
+ };
+ };
+
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
@@ -547,6 +575,10 @@
pinctrl-0 = <&pinctrl_wdtrst1_default>;
};
+&wdt2 {
+ aspeed,alt-boot;
+};
+
&ibt {
status = "okay";
};
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts b/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts
index ebe726a0d311..ccbf645ab84d 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts
@@ -55,6 +55,12 @@
gpios = <&gpio ASPEED_GPIO(F, 7) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(F, 7)>;
};
+
+ pcie-e2b-present{
+ label = "pcie-e2b-present";
+ gpios = <&gpio ASPEED_GPIO(E, 7) GPIO_ACTIVE_LOW>;
+ linux,code = <ASPEED_GPIO(E, 7)>;
+ };
};
leds {
diff --git a/arch/arm/boot/dts/aspeed-bmc-portwell-neptune.dts b/arch/arm/boot/dts/aspeed-bmc-portwell-neptune.dts
new file mode 100644
index 000000000000..43ed13963d35
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-portwell-neptune.dts
@@ -0,0 +1,159 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2017 Facebook Inc.
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+ model = "Portwell Neptune BMC";
+ compatible = "portwell,neptune-bmc", "aspeed,ast2500";
+ aliases {
+ serial0 = &uart1;
+ serial4 = &uart5;
+ };
+ chosen {
+ stdout-path = &uart5;
+ bootargs = "console=ttyS4,115200 earlyprintk";
+ };
+
+ memory {
+ reg = <0x80000000 0x20000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ postcode0 {
+ label="BMC_UP";
+ gpios = <&gpio ASPEED_GPIO(H, 0) GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+ postcode1 {
+ label="BMC_HB";
+ gpios = <&gpio ASPEED_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ postcode2 {
+ label="FAULT";
+ gpios = <&gpio ASPEED_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
+ };
+ // postcode3-7 are GPIOH3-H7
+ };
+};
+
+&fmc {
+ status = "okay";
+ flash@0 {
+ status = "okay";
+ m25p,fast-read;
+#include "openbmc-flash-layout.dtsi"
+ };
+};
+
+&spi1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1_default>;
+ flash@0 {
+ status = "okay";
+ m25p,fast-read;
+ label = "pnor";
+ };
+};
+
+&uart1 {
+ // Host Console
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_txd1_default
+ &pinctrl_rxd1_default>;
+};
+
+&uart5 {
+ // BMC Console
+ status = "okay";
+};
+
+&mac0 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rmii1_default
+ &pinctrl_mdio1_default>;
+};
+
+&mac1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rmii2_default>;
+ use-ncsi;
+};
+
+&i2c1 {
+ status = "okay";
+ // To PCIe slot SMBUS
+};
+
+&i2c2 {
+ status = "okay";
+ // To LAN I210
+};
+
+&i2c3 {
+ status = "okay";
+ // SMBus to COMe AB
+};
+
+&i2c4 {
+ status = "okay";
+ // I2C to COMe AB
+};
+
+&i2c5 {
+ status = "okay";
+// USB Debug card
+ pca9555@27 {
+ compatible = "nxp,pca9555";
+ reg = <0x27>;
+ };
+};
+
+&i2c6 {
+ status = "okay";
+ tpm@20 {
+ compatible = "infineon,slb9645tt";
+ reg = <0x20>;
+ };
+ tmp421@4e {
+ compatible = "ti,tmp421";
+ reg = <0x4e>;
+ };
+ tmp421@4f {
+ compatible = "ti,tmp421";
+ reg = <0x4f>;
+ };
+};
+
+&i2c8 {
+ status = "okay";
+ eeprom@51 {
+ compatible = "atmel,24c128";
+ reg = <0x51>;
+ pagesize = <32>;
+ };
+};
+
+&pwm_tacho {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default>;
+ fan@0 {
+ reg = <0x00>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+ };
+
+ fan@1 {
+ reg = <0x00>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+ };
+};
diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
index 518d2bc7c7fc..75df1573380e 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -108,6 +108,23 @@
status = "disabled";
};
+ ehci0: usb@1e6a1000 {
+ compatible = "aspeed,ast2400-ehci", "generic-ehci";
+ reg = <0x1e6a1000 0x100>;
+ interrupts = <5>;
+ clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>;
+ status = "disabled";
+ };
+
+ uhci: usb@1e6b0000 {
+ compatible = "aspeed,ast2400-uhci", "generic-uhci";
+ reg = <0x1e6b0000 0x100>;
+ interrupts = <14>;
+ #ports = <3>;
+ clocks = <&syscon ASPEED_CLK_GATE_USBUHCICLK>;
+ status = "disabled";
+ };
+
apb {
compatible = "simple-bus";
#address-cells = <1>;
@@ -125,6 +142,14 @@
pinctrl: pinctrl {
compatible = "aspeed,g4-pinctrl";
};
+
+ };
+
+ rng: hwrng@1e6e2078 {
+ compatible = "timeriomem_rng";
+ reg = <0x1e6e2078 0x4>;
+ period = <1>;
+ quality = <100>;
};
adc: adc@1e6e9000 {
@@ -1250,6 +1275,16 @@
groups = "USBCKI";
};
+ pinctrl_usb2h_default: usb2h_default {
+ function = "USB2H1";
+ groups = "USB2H1";
+ };
+
+ pinctrl_usb2d_default: usb2d_default {
+ function = "USB2D1";
+ groups = "USB2D1";
+ };
+
pinctrl_vgabios_rom_default: vgabios_rom_default {
function = "VGABIOS_ROM";
groups = "VGABIOS_ROM";
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index f9917717dd08..17f2714d18a7 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -143,6 +143,31 @@
status = "disabled";
};
+ ehci0: usb@1e6a1000 {
+ compatible = "aspeed,ast2500-ehci", "generic-ehci";
+ reg = <0x1e6a1000 0x100>;
+ interrupts = <5>;
+ clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>;
+ status = "disabled";
+ };
+
+ ehci1: usb@1e6a3000 {
+ compatible = "aspeed,ast2500-ehci", "generic-ehci";
+ reg = <0x1e6a3000 0x100>;
+ interrupts = <13>;
+ clocks = <&syscon ASPEED_CLK_GATE_USBPORT2CLK>;
+ status = "disabled";
+ };
+
+ uhci: usb@1e6b0000 {
+ compatible = "aspeed,ast2500-uhci", "generic-uhci";
+ reg = <0x1e6b0000 0x100>;
+ interrupts = <14>;
+ #ports = <2>;
+ clocks = <&syscon ASPEED_CLK_GATE_USBUHCICLK>;
+ status = "disabled";
+ };
+
apb {
compatible = "simple-bus";
#address-cells = <1>;
@@ -164,6 +189,13 @@
};
};
+ rng: hwrng@1e6e2078 {
+ compatible = "timeriomem_rng";
+ reg = <0x1e6e2078 0x4>;
+ period = <1>;
+ quality = <100>;
+ };
+
gfx: display@1e6e6000 {
compatible = "aspeed,ast2500-gfx", "syscon";
reg = <0x1e6e6000 0x1000>;
@@ -1380,6 +1412,21 @@
groups = "USBCKI";
};
+ pinctrl_usb2ah_default: usb2ah_default {
+ function = "USB2AH";
+ groups = "USB2AH";
+ };
+
+ pinctrl_usb11bhid_default: usb11bhid_default {
+ function = "USB11BHID";
+ groups = "USB11BHID";
+ };
+
+ pinctrl_usb2bh_default: usb2bh_default {
+ function = "USB2BH";
+ groups = "USB2BH";
+ };
+
pinctrl_vgabiosrom_default: vgabiosrom_default {
function = "VGABIOSROM";
groups = "VGABIOSROM";
diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
index e4bbb7e0f793..fcc85d70f36e 100644
--- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
@@ -232,7 +232,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_charger_chglev &pinctrl_charger_lbo &pinctrl_charger_irq>;
interrupt-parent = <&pioA>;
- interrupts = <PIN_PB13 GPIO_ACTIVE_LOW>;
+ interrupts = <PIN_PB13 IRQ_TYPE_EDGE_RISING>;
active-semi,chglev-gpios = <&pioA PIN_PA12 GPIO_ACTIVE_HIGH>;
active-semi,lbo-gpios = <&pioA PIN_PC8 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/at91-sama5d4ek.dts b/arch/arm/boot/dts/at91-sama5d4ek.dts
index 7887a7160a54..0702a2f2b336 100644
--- a/arch/arm/boot/dts/at91-sama5d4ek.dts
+++ b/arch/arm/boot/dts/at91-sama5d4ek.dts
@@ -129,8 +129,8 @@
wakeup-source;
};
- atmel_mxt_ts@4c {
- compatible = "atmel,atmel_mxt_ts";
+ touchscreen@4c {
+ compatible = "atmel,maxtouch";
reg = <0x4c>;
interrupt-parent = <&pioE>;
interrupts = <24 0x0>;
diff --git a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
index aa1fc7babfea..2cd9c5e4f892 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
@@ -101,6 +101,12 @@
hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
};
+&pwm {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
+ status = "okay";
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_gpio14>;
diff --git a/arch/arm/boot/dts/bcm2835-rpi-a.dts b/arch/arm/boot/dts/bcm2835-rpi-a.dts
index 425f6b0a5ef8..067d1f07a2d3 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-a.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-a.dts
@@ -96,6 +96,12 @@
hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>;
};
+&pwm {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
+ status = "okay";
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_gpio14>;
diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
index effa195e7895..cfbdaacbaeba 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
@@ -103,6 +103,12 @@
hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
};
+&pwm {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
+ status = "okay";
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_gpio14>;
diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
index 772ec3b48231..5641d162dfdb 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
@@ -96,6 +96,12 @@
hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
};
+&pwm {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
+ status = "okay";
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_gpio14>;
diff --git a/arch/arm/boot/dts/bcm2835-rpi-b.dts b/arch/arm/boot/dts/bcm2835-rpi-b.dts
index 434483d6fc14..31ff602e2cd3 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-b.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-b.dts
@@ -91,6 +91,12 @@
hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>;
};
+&pwm {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
+ status = "okay";
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_gpio14>;
diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi
index 6c3cfaa77f3d..cb2d6d78a7fb 100644
--- a/arch/arm/boot/dts/bcm2835-rpi.dtsi
+++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi
@@ -83,12 +83,6 @@
bus-width = <4>;
};
-&pwm {
- pinctrl-names = "default";
- pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
- status = "okay";
-};
-
&usb {
power-domains = <&power RPI_POWER_DOMAIN_USB>;
};
diff --git a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
index 5c339adabdf0..2fef70a09953 100644
--- a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
+++ b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
@@ -41,6 +41,12 @@
hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
};
+&pwm {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
+ status = "okay";
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_gpio14>;
diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts
new file mode 100644
index 000000000000..4adb85e66be3
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts
@@ -0,0 +1,108 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2837.dtsi"
+#include "bcm2835-rpi.dtsi"
+#include "bcm283x-rpi-lan7515.dtsi"
+#include "bcm283x-rpi-usb-host.dtsi"
+
+/ {
+ compatible = "raspberrypi,3-model-b-plus", "brcm,bcm2837";
+ model = "Raspberry Pi 3 Model B+";
+
+ chosen {
+ /* 8250 auxiliary UART instead of pl011 */
+ stdout-path = "serial1:115200n8";
+ };
+
+ memory {
+ reg = <0 0x40000000>;
+ };
+
+ leds {
+ act {
+ gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
+ };
+
+ pwr {
+ label = "PWR";
+ gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ wifi_pwrseq: wifi-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&expgpio 1 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&firmware {
+ expgpio: gpio {
+ compatible = "raspberrypi,firmware-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-line-names = "BT_ON",
+ "WL_ON",
+ "STATUS_LED",
+ "LAN_RUN",
+ "",
+ "CAM_GPIO0",
+ "CAM_GPIO1",
+ "";
+ status = "okay";
+ };
+};
+
+&hdmi {
+ hpd-gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
+};
+
+&pwm {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio41>;
+ status = "okay";
+};
+
+/* SDHCI is used to control the SDIO for wireless */
+&sdhci {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_gpio34>;
+ status = "okay";
+ bus-width = <4>;
+ non-removable;
+ mmc-pwrseq = <&wifi_pwrseq>;
+
+ brcmf: wifi@1 {
+ reg = <1>;
+ compatible = "brcm,bcm4329-fmac";
+ };
+};
+
+/* SDHOST is used to drive the SD card */
+&sdhost {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdhost_gpio48>;
+ status = "okay";
+ bus-width = <4>;
+};
+
+/* uart0 communicates with the BT module */
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_ctsrts_gpio30 &uart0_gpio32 &gpclk2_gpio43>;
+ status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm43438-bt";
+ max-speed = <2000000>;
+ shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+/* uart1 is mapped to the pin header */
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_gpio14>;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
index 0b31d995a066..c318bcbc6ba7 100644
--- a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
+++ b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
@@ -20,9 +20,14 @@
leds {
act {
- gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
+ gpios = <&expgpio 2 GPIO_ACTIVE_HIGH>;
};
};
+
+ wifi_pwrseq: wifi-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&expgpio 1 GPIO_ACTIVE_HIGH>;
+ };
};
&firmware {
@@ -42,6 +47,16 @@
};
};
+&pwm {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio41>;
+ status = "okay";
+};
+
+&hdmi {
+ hpd-gpios = <&expgpio 4 GPIO_ACTIVE_LOW>;
+};
+
/* uart0 communicates with the BT module */
&uart0 {
pinctrl-names = "default";
@@ -51,6 +66,7 @@
bluetooth {
compatible = "brcm,bcm43438-bt";
max-speed = <2000000>;
+ shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>;
};
};
@@ -63,11 +79,19 @@
/* SDHCI is used to control the SDIO for wireless */
&sdhci {
+ #address-cells = <1>;
+ #size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&emmc_gpio34>;
status = "okay";
bus-width = <4>;
non-removable;
+ mmc-pwrseq = <&wifi_pwrseq>;
+
+ brcmf: wifi@1 {
+ reg = <1>;
+ compatible = "brcm,bcm4329-fmac";
+ };
};
/* SDHOST is used to drive the SD card */
diff --git a/arch/arm/boot/dts/bcm283x-rpi-lan7515.dtsi b/arch/arm/boot/dts/bcm283x-rpi-lan7515.dtsi
new file mode 100644
index 000000000000..9403da0990d0
--- /dev/null
+++ b/arch/arm/boot/dts/bcm283x-rpi-lan7515.dtsi
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: GPL-2.0
+/ {
+ aliases {
+ ethernet0 = &ethernet;
+ };
+};
+
+&usb {
+ usb-port@1 {
+ compatible = "usb424,2514";
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usb-port@1 {
+ compatible = "usb424,2514";
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethernet: ethernet@1 {
+ compatible = "usb424,7800";
+ reg = <1>;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi
index ac00e730f898..61315cf734ef 100644
--- a/arch/arm/boot/dts/bcm283x.dtsi
+++ b/arch/arm/boot/dts/bcm283x.dtsi
@@ -136,6 +136,7 @@
rng@7e104000 {
compatible = "brcm,bcm2835-rng";
reg = <0x7e104000 0x10>;
+ interrupts = <2 29>;
};
mailbox: mailbox@7e00b880 {
diff --git a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
index 4175174e589a..ff2e551b9058 100644
--- a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
+++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
@@ -1,20 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
* Broadcom BCM470X / BCM5301X ARM platform code.
* DTS for Asus RT-AC56U
*
* Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
- * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
- * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
- * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
- * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- * PERFORMANCE OF THIS SOFTWARE.
*/
/dts-v1/;
diff --git a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
index 8fa033fea959..3bcc03788f38 100644
--- a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
+++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
@@ -1,20 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
* Broadcom BCM470X / BCM5301X ARM platform code.
* DTS for Asus RT-AC68U
*
* Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
- * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
- * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
- * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
- * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- * PERFORMANCE OF THIS SOFTWARE.
*/
/dts-v1/;
diff --git a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
index 8b64caabaad8..a587384f8e40 100644
--- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
@@ -1,10 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
* Broadcom BCM470X / BCM5301X ARM platform code.
* DTS for Buffalo WZR-1750DHP
*
* Copyright (C) 2014 Rafał Miłecki <zajec5@gmail.com>
- *
- * Licensed under the GNU/GPL. See COPYING for details.
*/
/dts-v1/;
diff --git a/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts b/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts
index 126ab5867772..6c8f0ad82332 100644
--- a/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts
+++ b/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts
@@ -1,7 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
* Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl>
- *
- * Licensed under the ISC license.
*/
/dts-v1/;
diff --git a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
index f591b0f256d8..ebda45fe9ea4 100644
--- a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
+++ b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
@@ -1,7 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
* Copyright 2016 Luxul Inc.
- *
- * Licensed under the ISC license.
*/
/dts-v1/;
diff --git a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
index 50d65d8fbd9a..9dd0e22c906a 100644
--- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
+++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
@@ -1,10 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
* Broadcom BCM470X / BCM5301X ARM platform code.
* DTS for Luxul XWC-1000
*
* Copyright 2014 Luxul Inc.
- *
- * Licensed under the GNU/GPL. See COPYING for details.
*/
/dts-v1/;
@@ -26,9 +25,15 @@
nand: nand@18028000 {
nandcs@0 {
- partition@0 {
- label = "ubi";
- reg = <0x00000000 0x08000000>;
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "ubi";
+ reg = <0x00000000 0x08000000>;
+ };
};
};
};
diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
index bb66cebe0bd8..2642494c97a1 100644
--- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
+++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
@@ -1,20 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
* Broadcom BCM470X / BCM5301X ARM platform code.
* DTS for Netgear R6300 V2
*
* Copyright (C) 2014 Rafał Miłecki <zajec5@gmail.com>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
- * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
- * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
- * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
- * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- * PERFORMANCE OF THIS SOFTWARE.
*/
/dts-v1/;
diff --git a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
index 83a4c60bb431..e7b09b7b7d25 100644
--- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
+++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
@@ -1,10 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
* Broadcom BCM470X / BCM5301X arm platform code.
* DTS for SmartRG SR400ac
*
* Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
- *
- * Licensed under the GNU/GPL. See COPYING for details.
*/
/dts-v1/;
diff --git a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
index 0800a964f2fe..16314fcc6e56 100644
--- a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
+++ b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
@@ -1,20 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
* Broadcom BCM470X / BCM5301X ARM platform code.
* DTS for Asus RT-N18U
*
* Copyright (C) 2014 Rafał Miłecki <zajec5@gmail.com>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
- * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
- * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
- * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
- * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- * PERFORMANCE OF THIS SOFTWARE.
*/
/dts-v1/;
diff --git a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
index c2af33eb47de..328aa90240ce 100644
--- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
@@ -1,20 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
* Broadcom BCM470X / BCM5301X ARM platform code.
* DTS for Buffalo WZR-600DHP2
*
* Copyright (C) 2014 Rafał Miłecki <zajec5@gmail.com>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
- * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
- * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
- * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
- * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- * PERFORMANCE OF THIS SOFTWARE.
*/
/dts-v1/;
diff --git a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
index 87ea6ba664f5..8ea46eed26e2 100644
--- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
@@ -1,20 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
* Broadcom BCM470X / BCM5301X ARM platform code.
* DTS for Buffalo WZR-900DHP
*
* Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
- * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
- * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
- * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
- * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- * PERFORMANCE OF THIS SOFTWARE.
*/
/dts-v1/;
diff --git a/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts b/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
index 9b5759849983..5eeac7302329 100644
--- a/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
+++ b/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
@@ -1,7 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
* Copyright 2017 Luxul Inc.
- *
- * Licensed under the ISC license.
*/
/dts-v1/;
diff --git a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
index ba1c19b1b3eb..da4d9ec62fc6 100644
--- a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
+++ b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
@@ -1,7 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
* Copyright 2017 Luxul Inc.
- *
- * Licensed under the ISC license.
*/
/dts-v1/;
diff --git a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
index 3ed8de42cb48..c94c732188fb 100644
--- a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
+++ b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
@@ -1,7 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
* Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl>
- *
- * Licensed under the ISC license.
*/
/dts-v1/;
diff --git a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
index df473cc41572..22271818f901 100644
--- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
+++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
@@ -1,20 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
* Broadcom BCM470X / BCM5301X ARM platform code.
* DTS for Asus RT-AC87U
*
* Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
- * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
- * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
- * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
- * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- * PERFORMANCE OF THIS SOFTWARE.
*/
/dts-v1/;
diff --git a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
index 92058c73ee59..79a9633ec417 100644
--- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
+++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
@@ -1,10 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
* Broadcom BCM470X / BCM5301X ARM platform code.
* DTS for Buffalo WXR-1900DHP
*
* Copyright (C) 2015 Felix Fietkau <nbd@openwrt.org>
- *
- * Licensed under the GNU/GPL. See COPYING for details.
*/
/dts-v1/;
diff --git a/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts b/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts
index 3d1d9c2c4efc..db744a5e122d 100644
--- a/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts
+++ b/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts
@@ -1,7 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
* Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl>
- *
- * Licensed under the ISC license.
*/
/dts-v1/;
diff --git a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
index f43ab4721456..9e267d38df4c 100644
--- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
+++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
@@ -1,20 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
* Broadcom BCM470X / BCM5301X ARM platform code.
* DTS for Netgear R7000
*
* Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
- * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
- * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
- * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
- * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- * PERFORMANCE OF THIS SOFTWARE.
*/
/dts-v1/;
diff --git a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
index ec4a50e440f6..f5bf6586ae07 100644
--- a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
+++ b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
@@ -1,7 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
* Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
- *
- * Licensed under the ISC license.
*/
/dts-v1/;
diff --git a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
index 7cc7d344fe5b..d173bcd93b91 100644
--- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
@@ -1,20 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
* Broadcom BCM470X / BCM5301X ARM platform code.
* DTS for D-Link DIR-885L
*
* Copyright (C) 2016 Rafał Miłecki <zajec5@gmail.com>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
- * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
- * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
- * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
- * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- * PERFORMANCE OF THIS SOFTWARE.
*/
/dts-v1/;
@@ -37,9 +26,15 @@
nand: nand@18028000 {
nandcs@0 {
- partition@0 {
- label = "firmware";
- reg = <0x00000000 0x08000000>;
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "firmware";
+ reg = <0x00000000 0x08000000>;
+ };
};
};
};
diff --git a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
index b6750f70dffb..f47afe36d857 100644
--- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
+++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
@@ -1,7 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
* Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl>
- *
- * Licensed under the ISC license.
*/
/dts-v1/;
diff --git a/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
index ecd22a246746..a5cef51cfe4f 100644
--- a/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
+++ b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
@@ -1,7 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
* Copyright (C) 2017 Luxul Inc.
- *
- * Licensed under the ISC license.
*/
/dts-v1/;
diff --git a/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts b/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts
new file mode 100644
index 000000000000..7fd85475893d
--- /dev/null
+++ b/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018 Luxul Inc.
+ */
+
+/dts-v1/;
+
+#include "bcm47094.dtsi"
+
+/ {
+ compatible = "luxul,xap-1610-v1", "brcm,bcm47094", "brcm,bcm4708";
+ model = "Luxul XAP-1610 V1";
+
+ chosen {
+ bootargs = "earlycon";
+ };
+
+ memory {
+ reg = <0x00000000 0x08000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ status {
+ label = "bcm53xx:green:status";
+ gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "timer";
+ };
+
+ 2ghz {
+ label = "bcm53xx:blue:2ghz";
+ gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+ };
+
+ 5ghz {
+ label = "bcm53xx:blue:5ghz";
+ gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&spi_nor {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
index 15ffb1abc440..7496aabf8f77 100644
--- a/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
+++ b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
@@ -1,7 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
* Copyright (C) 2017 Luxul Inc.
- *
- * Licensed under the ISC license.
*/
/dts-v1/;
diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
index bc1d1e10d4ac..53aaa5212610 100644
--- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
@@ -1,7 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
* Copyright 2016 Luxul Inc.
- *
- * Licensed under the ISC license.
*/
/dts-v1/;
diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
new file mode 100644
index 000000000000..bdad7267255a
--- /dev/null
+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
@@ -0,0 +1,77 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018 Luxul Inc.
+ */
+
+/dts-v1/;
+
+#include "bcm47094.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+ compatible = "luxul,xwr-3150-v1", "brcm,bcm47094", "brcm,bcm4708";
+ model = "Luxul XWR-3150 V1";
+
+ chosen {
+ bootargs = "earlycon";
+ };
+
+ memory {
+ reg = <0x00000000 0x08000000
+ 0x88000000 0x18000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ power {
+ label = "bcm53xx:green:power";
+ gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-on";
+ };
+
+ usb3 {
+ label = "bcm53xx:green:usb3";
+ gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&ohci_port1>, <&ehci_port1>,
+ <&xhci_port1>;
+ linux,default-trigger = "usbport";
+ };
+
+ status {
+ label = "bcm53xx:green:status";
+ gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "timer";
+ };
+
+ 2ghz {
+ label = "bcm53xx:green:2ghz";
+ gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+ };
+
+ 5ghz {
+ label = "bcm53xx:green:5ghz";
+ gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&usb3 {
+ vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
+};
+
+&spi_nor {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
index 859929973158..0e718edc065a 100644
--- a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
+++ b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
@@ -1,7 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
* Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
- *
- * Licensed under the ISC license.
*/
/dts-v1/;
diff --git a/arch/arm/boot/dts/bcm5301x-nand-cs0-bch1.dtsi b/arch/arm/boot/dts/bcm5301x-nand-cs0-bch1.dtsi
index 24b099c00f13..c349e8f0afc5 100644
--- a/arch/arm/boot/dts/bcm5301x-nand-cs0-bch1.dtsi
+++ b/arch/arm/boot/dts/bcm5301x-nand-cs0-bch1.dtsi
@@ -1,9 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
* Broadcom Northstar NAND.
*
* Copyright (C) 2016 Rafał Miłecki <rafal.milecki@gmail.com>
- *
- * Licensed under the ISC license.
*/
#include "bcm5301x-nand-cs0.dtsi"
diff --git a/arch/arm/boot/dts/bcm5301x-nand-cs0-bch4.dtsi b/arch/arm/boot/dts/bcm5301x-nand-cs0-bch4.dtsi
index b4e875df9528..18e25e302b13 100644
--- a/arch/arm/boot/dts/bcm5301x-nand-cs0-bch4.dtsi
+++ b/arch/arm/boot/dts/bcm5301x-nand-cs0-bch4.dtsi
@@ -1,7 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
* Copyright 2016 Luxul Inc.
- *
- * Licensed under the ISC license.
*/
#include "bcm5301x-nand-cs0.dtsi"
diff --git a/arch/arm/boot/dts/bcm5301x-nand-cs0-bch8.dtsi b/arch/arm/boot/dts/bcm5301x-nand-cs0-bch8.dtsi
index 9a9630ded306..c8e56d30bd6f 100644
--- a/arch/arm/boot/dts/bcm5301x-nand-cs0-bch8.dtsi
+++ b/arch/arm/boot/dts/bcm5301x-nand-cs0-bch8.dtsi
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
* Broadcom BCM470X / BCM5301X Nand chip defaults.
*
@@ -5,8 +6,6 @@
* and uses 8 bit ECC.
*
* Copyright (C) 2015 Hauke Mehrtens <hauke@hauke-m.de>
- *
- * Licensed under the GNU/GPL. See COPYING for details.
*/
#include "bcm5301x-nand-cs0.dtsi"
diff --git a/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi b/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi
index 168495106b82..e5a2d62daf92 100644
--- a/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi
+++ b/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi
@@ -1,9 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
* Broadcom Northstar NAND.
*
* Copyright (C) 2015 Hauke Mehrtens <hauke@hauke-m.de>
- *
- * Licensed under the GNU/GPL. See COPYING for details.
*/
/ {
diff --git a/arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts b/arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts
index 1c475796d17f..64a297759eb9 100644
--- a/arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts
+++ b/arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts
@@ -1,39 +1,8 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
/*
* Device Tree file for Sony NSZ-GS7
*
* Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
diff --git a/arch/arm/boot/dts/berlin2.dtsi b/arch/arm/boot/dts/berlin2.dtsi
index d575823c5750..db67377af266 100644
--- a/arch/arm/boot/dts/berlin2.dtsi
+++ b/arch/arm/boot/dts/berlin2.dtsi
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
/*
* Device Tree Include file for Marvell Armada 1500 (Berlin BG2) SoC
*
@@ -5,38 +6,6 @@
*
* based on GPL'ed 2.6 kernel sources
* (c) Marvell International Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
#include <dt-bindings/clock/berlin2.h>
@@ -149,7 +118,7 @@
local-timer@ad0600 {
compatible = "arm,cortex-a9-twd-timer";
reg = <0xad0600 0x20>;
- interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>;
clocks = <&chip_clk CLKID_TWD>;
};
diff --git a/arch/arm/boot/dts/berlin2cd-google-chromecast.dts b/arch/arm/boot/dts/berlin2cd-google-chromecast.dts
index ca24def0ce13..56fa951bc86f 100644
--- a/arch/arm/boot/dts/berlin2cd-google-chromecast.dts
+++ b/arch/arm/boot/dts/berlin2cd-google-chromecast.dts
@@ -1,39 +1,8 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
/*
* Device Tree file for Google Chromecast
*
* Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
@@ -52,22 +21,35 @@
memory@0 {
device_type = "memory";
- reg = <0x00000000 0x20000000>; /* 512 MB */
+
+ /*
+ * We're using "linux,usable-memory" instead of "reg" here
+ * because the (signed and encrypted) bootloader that shipped
+ * with this device provides an incorrect memory range in
+ * ATAG_MEM. Linux helpfully overrides the "reg" property with
+ * data from the ATAG, so we can't specify the proper range
+ * normally. Fortunately, this alternate property is checked
+ * first by the OF driver, so we can (ab)use it instead.
+ */
+ linux,usable-memory = <0x00000000 0x20000000>; /* 512 MB */
};
leds {
- compatible = "gpio-leds";
+ compatible = "pwm-leds";
+ pinctrl-0 = <&ledpwm_pmux>;
+ pinctrl-names = "default";
white {
label = "white";
- gpios = <&portc 1 GPIO_ACTIVE_HIGH>;
- default-state = "keep";
+ pwms = <&pwm 0 600000 0>;
+ max-brightness = <255>;
+ linux,default-trigger = "default-on";
};
red {
label = "red";
- gpios = <&portc 2 GPIO_ACTIVE_HIGH>;
- default-state = "keep";
+ pwms = <&pwm 1 600000 0>;
+ max-brightness = <255>;
};
};
};
@@ -86,3 +68,10 @@
&usb_phy1 { status = "okay"; };
&usb1 { status = "okay"; };
+
+&soc_pinctrl {
+ ledpwm_pmux: ledpwm-pmux {
+ groups = "G0";
+ function = "pwm";
+ };
+};
diff --git a/arch/arm/boot/dts/berlin2cd-valve-steamlink.dts b/arch/arm/boot/dts/berlin2cd-valve-steamlink.dts
new file mode 100644
index 000000000000..79ac842ae461
--- /dev/null
+++ b/arch/arm/boot/dts/berlin2cd-valve-steamlink.dts
@@ -0,0 +1,79 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2018 Alexander Monakov <amonakov@gmail.com>
+ */
+/dts-v1/;
+
+#include "berlin2cd.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "Valve Steam Link";
+ compatible = "valve,steamlink", "marvell,berlin2cd", "marvell,berlin";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x00000000 0x20000000>; /* 512 MB */
+ };
+
+ gpio-restart {
+ compatible = "gpio-restart";
+ gpios = <&porta 6 GPIO_ACTIVE_HIGH>;
+ active-delay = <100>;
+ inactive-delay = <10>;
+ wait-delay = <100>;
+ priority = <200>;
+ };
+};
+
+&cpu {
+ cpu-supply = <&vcpu>;
+ operating-points = <
+ /* kHz uV */
+ 1000000 1325000
+ >;
+};
+
+&i2c0 {
+ status = "okay";
+
+ /* There are two regulators on the board. One is accessible via I2C,
+ * with buck1 providing SoC power (set up by bootloader to 1.325V or
+ * less depending on leakage value in OTP), and buck2 likely used for
+ * DRAM (providing 1.35V). The other regulator on the opposite side
+ * of the board is probably supplying SDIO and NAND fixed voltages. */
+ regulator@19 {
+ compatible = "marvell,88pg868";
+ reg = <0x19>;
+
+ vcpu: buck1 {
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1325000>;
+ };
+ };
+};
+
+/* Fixed interface to on-board Marvell 8897 Wi-Fi/Bluetooth/NFC chip. */
+&sdhci0 {
+ keep-power-in-suspend;
+ non-removable;
+ status = "okay";
+};
+
+&uart0 {
+ /* RX/TX are routed to TP50/TP51 on the board. */
+ status = "okay";
+};
+
+/* The SoC is connected to on-board USB hub that in turn has one downstream
+ * port wired to the on-board Steam Controller wireless receiver chip. */
+&usb_phy1 { status = "okay"; };
+
+&usb1 {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&eth1 { status = "okay"; };
diff --git a/arch/arm/boot/dts/berlin2cd.dtsi b/arch/arm/boot/dts/berlin2cd.dtsi
index 501c59d97eae..e5c1f4213ff9 100644
--- a/arch/arm/boot/dts/berlin2cd.dtsi
+++ b/arch/arm/boot/dts/berlin2cd.dtsi
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
/*
* Device Tree Include file for Marvell Armada 1500-mini (Berlin BG2CD) SoC
*
@@ -5,38 +6,6 @@
*
* based on GPL'ed 2.6 kernel sources
* (c) Marvell International Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
#include <dt-bindings/clock/berlin2.h>
@@ -57,7 +26,7 @@
#address-cells = <1>;
#size-cells = <0>;
- cpu@0 {
+ cpu: cpu@0 {
compatible = "arm,cortex-a9";
device_type = "cpu";
next-level-cache = <&l2>;
@@ -73,6 +42,12 @@
};
};
+ pmu {
+ compatible = "arm,cortex-a9-pmu";
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
refclk: oscillator {
compatible = "fixed-clock";
#clock-cells = <0>;
@@ -87,11 +62,6 @@
ranges = <0 0xf7000000 0x1000000>;
- pmu {
- compatible = "arm,cortex-a9-pmu";
- interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
- };
-
sdhci0: sdhci@ab0000 {
compatible = "mrvl,pxav3-mmc";
reg = <0xab0000 0x200>;
@@ -108,6 +78,11 @@
cache-level = <2>;
};
+ snoop-control-unit@ad0000 {
+ compatible = "arm,cortex-a9-scu";
+ reg = <0xad0000 0x100>;
+ };
+
gic: interrupt-controller@ad1000 {
compatible = "arm,cortex-a9-gic";
reg = <0xad1000 0x1000>, <0xad0100 0x0100>;
@@ -115,10 +90,24 @@
#interrupt-cells = <3>;
};
+ global-timer@ad0200 {
+ compatible = "arm,cortex-a9-global-timer";
+ reg = <0xad0200 0x20>;
+ interrupts = <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_EDGE_RISING)>;
+ clocks = <&chip_clk CLKID_TWD>;
+ };
+
local-timer@ad0600 {
compatible = "arm,cortex-a9-twd-timer";
reg = <0xad0600 0x20>;
- interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>;
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_EDGE_RISING)>;
+ clocks = <&chip_clk CLKID_TWD>;
+ };
+
+ local-wdt@ad0620 {
+ compatible = "arm,cortex-a9-twd-wdt";
+ reg = <0xad0620 0x20>;
+ interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_EDGE_RISING)>;
clocks = <&chip_clk CLKID_TWD>;
};
@@ -254,6 +243,60 @@
};
};
+ i2c0: i2c@1400 {
+ compatible = "snps,designware-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x1400 0x100>;
+ interrupts = <16>;
+ clocks = <&chip_clk CLKID_CFG>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@1800 {
+ compatible = "snps,designware-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x1800 0x100>;
+ interrupts = <17>;
+ clocks = <&chip_clk CLKID_CFG>;
+ status = "disabled";
+ };
+
+ spi0: spi@1c00 {
+ compatible = "snps,dw-apb-ssi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x1c00 0x100>;
+ interrupts = <4>;
+ clocks = <&chip_clk CLKID_CFG>;
+ status = "disabled";
+ };
+
+ wdt4: watchdog@2000 {
+ compatible = "snps,dw-wdt";
+ reg = <0x2000 0x100>;
+ clocks = <&chip_clk CLKID_CFG>;
+ interrupts = <5>;
+ status = "disabled";
+ };
+
+ wdt5: watchdog@2400 {
+ compatible = "snps,dw-wdt";
+ reg = <0x2400 0x100>;
+ clocks = <&chip_clk CLKID_CFG>;
+ interrupts = <6>;
+ status = "disabled";
+ };
+
+ wdt6: watchdog@2800 {
+ compatible = "snps,dw-wdt";
+ reg = <0x2800 0x100>;
+ clocks = <&chip_clk CLKID_CFG>;
+ interrupts = <7>;
+ status = "disabled";
+ };
+
timer0: timer@2c00 {
compatible = "snps,dw-apb-timer";
reg = <0x2c00 0x14>;
@@ -435,6 +478,36 @@
};
};
+ spi1: spi@6000 {
+ compatible = "snps,dw-apb-ssi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x6000 0x100>;
+ clocks = <&refclk>;
+ interrupts = <5>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@7000 {
+ compatible = "snps,designware-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x7000 0x100>;
+ interrupts = <6>;
+ clocks = <&refclk>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@8000 {
+ compatible = "snps,designware-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x8000 0x100>;
+ interrupts = <7>;
+ clocks = <&refclk>;
+ status = "disabled";
+ };
+
sm_gpio0: gpio@c000 {
compatible = "snps,dw-apb-gpio";
reg = <0xc000 0x400>;
@@ -472,6 +545,16 @@
status = "disabled";
};
+ uart2: serial@b000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0xb000 0x100>;
+ reg-shift = <2>;
+ reg-io-width = <1>;
+ interrupts = <10>;
+ clocks = <&refclk>;
+ status = "disabled";
+ };
+
sysctrl: system-controller@d000 {
compatible = "simple-mfd", "syscon";
reg = <0xd000 0x100>;
@@ -479,6 +562,12 @@
sys_pinctrl: pin-controller {
compatible = "marvell,berlin2cd-system-pinctrl";
};
+
+ adc: adc {
+ compatible = "marvell,berlin2-adc";
+ interrupts = <12>, <14>;
+ interrupt-names = "adc", "tsen";
+ };
};
sic: interrupt-controller@e000 {
diff --git a/arch/arm/boot/dts/berlin2q-marvell-dmp.dts b/arch/arm/boot/dts/berlin2q-marvell-dmp.dts
index 57aa5f8a7c77..c162f98cb8e8 100644
--- a/arch/arm/boot/dts/berlin2q-marvell-dmp.dts
+++ b/arch/arm/boot/dts/berlin2q-marvell-dmp.dts
@@ -1,37 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
/*
* Copyright (C) 2014 Antoine Ténart <antoine.tenart@free-electrons.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi
index bf3a6c9a1d34..516a7ce25791 100644
--- a/arch/arm/boot/dts/berlin2q.dtsi
+++ b/arch/arm/boot/dts/berlin2q.dtsi
@@ -1,37 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
/*
* Copyright (C) 2014 Antoine Ténart <antoine.tenart@free-electrons.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
#include <dt-bindings/clock/berlin2q.h>
@@ -53,7 +22,7 @@
#size-cells = <0>;
enable-method = "marvell,berlin-smp";
- cpu@0 {
+ cpu0: cpu@0 {
compatible = "arm,cortex-a9";
device_type = "cpu";
next-level-cache = <&l2>;
@@ -71,21 +40,21 @@
>;
};
- cpu@1 {
+ cpu1: cpu@1 {
compatible = "arm,cortex-a9";
device_type = "cpu";
next-level-cache = <&l2>;
reg = <1>;
};
- cpu@2 {
+ cpu2: cpu@2 {
compatible = "arm,cortex-a9";
device_type = "cpu";
next-level-cache = <&l2>;
reg = <2>;
};
- cpu@3 {
+ cpu3: cpu@3 {
compatible = "arm,cortex-a9";
device_type = "cpu";
next-level-cache = <&l2>;
@@ -93,6 +62,19 @@
};
};
+ pmu {
+ compatible = "arm,cortex-a9-pmu";
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&cpu0>,
+ <&cpu1>,
+ <&cpu2>,
+ <&cpu3>;
+ };
+
refclk: oscillator {
compatible = "fixed-clock";
#clock-cells = <0>;
@@ -107,14 +89,6 @@
ranges = <0 0xf7000000 0x1000000>;
interrupt-parent = <&gic>;
- pmu {
- compatible = "arm,cortex-a9-pmu";
- interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
- };
-
sdhci0: sdhci@ab0000 {
compatible = "mrvl,pxav3-mmc";
reg = <0xab0000 0x200>;
@@ -145,6 +119,7 @@
l2: l2-cache-controller@ac0000 {
compatible = "arm,pl310-cache";
reg = <0xac0000 0x1000>;
+ cache-unified;
cache-level = <2>;
arm,data-latency = <2 2 2>;
arm,tag-latency = <2 2 2>;
@@ -159,7 +134,7 @@
compatible = "arm,cortex-a9-twd-timer";
reg = <0xad0600 0x20>;
clocks = <&chip_clk CLKID_TWD>;
- interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
};
gic: interrupt-controller@ad1000 {
diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts
index 3962fa4b07f5..0e82bb988fde 100644
--- a/arch/arm/boot/dts/da850-evm.dts
+++ b/arch/arm/boot/dts/da850-evm.dts
@@ -27,143 +27,6 @@
spi0 = &spi1;
};
- soc@1c00000 {
- pmx_core: pinmux@14120 {
- status = "okay";
-
- mcasp0_pins: pinmux_mcasp0_pins {
- pinctrl-single,bits = <
- /*
- * AHCLKX, ACLKX, AFSX, AHCLKR, ACLKR,
- * AFSR, AMUTE
- */
- 0x00 0x11111111 0xffffffff
- /* AXR11, AXR12 */
- 0x04 0x00011000 0x000ff000
- >;
- };
- nand_pins: nand_pins {
- pinctrl-single,bits = <
- /* EMA_WAIT[0], EMA_OE, EMA_WE, EMA_CS[4], EMA_CS[3] */
- 0x1c 0x10110110 0xf0ff0ff0
- /*
- * EMA_D[0], EMA_D[1], EMA_D[2],
- * EMA_D[3], EMA_D[4], EMA_D[5],
- * EMA_D[6], EMA_D[7]
- */
- 0x24 0x11111111 0xffffffff
- /* EMA_A[1], EMA_A[2] */
- 0x30 0x01100000 0x0ff00000
- >;
- };
- };
- serial0: serial@42000 {
- status = "okay";
- };
- serial1: serial@10c000 {
- status = "okay";
- };
- serial2: serial@10d000 {
- status = "okay";
- };
- rtc0: rtc@23000 {
- status = "okay";
- };
- i2c0: i2c@22000 {
- status = "okay";
- clock-frequency = <100000>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins>;
-
- tps: tps@48 {
- reg = <0x48>;
- };
- tlv320aic3106: tlv320aic3106@18 {
- #sound-dai-cells = <0>;
- compatible = "ti,tlv320aic3106";
- reg = <0x18>;
- status = "okay";
-
- /* Regulators */
- IOVDD-supply = <&vdcdc2_reg>;
- /* Derived from VBAT: Baseboard 3.3V / 1.8V */
- AVDD-supply = <&vbat>;
- DRVDD-supply = <&vbat>;
- DVDD-supply = <&vbat>;
- };
- tca6416: gpio@20 {
- compatible = "ti,tca6416";
- reg = <0x20>;
- gpio-controller;
- #gpio-cells = <2>;
- };
- };
- wdt: wdt@21000 {
- status = "okay";
- };
- mmc0: mmc@40000 {
- max-frequency = <50000000>;
- bus-width = <4>;
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins>;
- };
- spi1: spi@30e000 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&spi1_pins &spi1_cs0_pin>;
- flash: m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "m25p64";
- spi-max-frequency = <30000000>;
- m25p,fast-read;
- reg = <0>;
- partition@0 {
- label = "U-Boot-SPL";
- reg = <0x00000000 0x00010000>;
- read-only;
- };
- partition@1 {
- label = "U-Boot";
- reg = <0x00010000 0x00080000>;
- read-only;
- };
- partition@2 {
- label = "U-Boot-Env";
- reg = <0x00090000 0x00010000>;
- read-only;
- };
- partition@3 {
- label = "Kernel";
- reg = <0x000a0000 0x00280000>;
- };
- partition@4 {
- label = "Filesystem";
- reg = <0x00320000 0x00400000>;
- };
- partition@5 {
- label = "MAC-Address";
- reg = <0x007f0000 0x00010000>;
- read-only;
- };
- };
- };
- mdio: mdio@224000 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&mdio_pins>;
- bus_freq = <2200000>;
- };
- eth0: ethernet@220000 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&mii_pins>;
- };
- gpio: gpio@226000 {
- status = "okay";
- };
- };
vbat: fixedregulator0 {
compatible = "regulator-fixed";
regulator-name = "vbat";
@@ -200,6 +63,155 @@
};
};
+&pmx_core {
+ status = "okay";
+
+ mcasp0_pins: pinmux_mcasp0_pins {
+ pinctrl-single,bits = <
+ /*
+ * AHCLKX, ACLKX, AFSX, AHCLKR, ACLKR,
+ * AFSR, AMUTE
+ */
+ 0x00 0x11111111 0xffffffff
+ /* AXR11, AXR12 */
+ 0x04 0x00011000 0x000ff000
+ >;
+ };
+ nand_pins: nand_pins {
+ pinctrl-single,bits = <
+ /* EMA_WAIT[0], EMA_OE, EMA_WE, EMA_CS[4], EMA_CS[3] */
+ 0x1c 0x10110110 0xf0ff0ff0
+ /*
+ * EMA_D[0], EMA_D[1], EMA_D[2],
+ * EMA_D[3], EMA_D[4], EMA_D[5],
+ * EMA_D[6], EMA_D[7]
+ */
+ 0x24 0x11111111 0xffffffff
+ /* EMA_A[1], EMA_A[2] */
+ 0x30 0x01100000 0x0ff00000
+ >;
+ };
+};
+
+&serial0 {
+ status = "okay";
+};
+
+&serial1 {
+ status = "okay";
+};
+
+&serial2 {
+ status = "okay";
+};
+
+&rtc0 {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+
+ tps: tps@48 {
+ reg = <0x48>;
+ };
+ tlv320aic3106: tlv320aic3106@18 {
+ #sound-dai-cells = <0>;
+ compatible = "ti,tlv320aic3106";
+ reg = <0x18>;
+ status = "okay";
+
+ /* Regulators */
+ IOVDD-supply = <&vdcdc2_reg>;
+ /* Derived from VBAT: Baseboard 3.3V / 1.8V */
+ AVDD-supply = <&vbat>;
+ DRVDD-supply = <&vbat>;
+ DVDD-supply = <&vbat>;
+ };
+ tca6416: gpio@20 {
+ compatible = "ti,tca6416";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+};
+
+&wdt {
+ status = "okay";
+};
+
+&mmc0 {
+ max-frequency = <50000000>;
+ bus-width = <4>;
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins>;
+ cd-gpios = <&gpio 64 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio 65 GPIO_ACTIVE_HIGH>;
+};
+
+&spi1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi1_pins &spi1_cs0_pin>;
+ flash: m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "m25p64";
+ spi-max-frequency = <30000000>;
+ m25p,fast-read;
+ reg = <0>;
+ partition@0 {
+ label = "U-Boot-SPL";
+ reg = <0x00000000 0x00010000>;
+ read-only;
+ };
+ partition@1 {
+ label = "U-Boot";
+ reg = <0x00010000 0x00080000>;
+ read-only;
+ };
+ partition@2 {
+ label = "U-Boot-Env";
+ reg = <0x00090000 0x00010000>;
+ read-only;
+ };
+ partition@3 {
+ label = "Kernel";
+ reg = <0x000a0000 0x00280000>;
+ };
+ partition@4 {
+ label = "Filesystem";
+ reg = <0x00320000 0x00400000>;
+ };
+ partition@5 {
+ label = "MAC-Address";
+ reg = <0x007f0000 0x00010000>;
+ read-only;
+ };
+ };
+};
+
+&mdio {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mdio_pins>;
+ bus_freq = <2200000>;
+};
+
+&eth0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mii_pins>;
+};
+
+&gpio {
+ status = "okay";
+};
+
/include/ "tps6507x.dtsi"
&tps {
@@ -309,6 +321,18 @@
};
};
+&usb_phy {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+};
+
+&usb1 {
+ status = "okay";
+};
+
&vpif {
pinctrl-names = "default";
pinctrl-0 = <&vpif_capture_pins>, <&vpif_display_pins>;
diff --git a/arch/arm/boot/dts/da850-lego-ev3.dts b/arch/arm/boot/dts/da850-lego-ev3.dts
index 1ffd87796cac..ee3932475ce7 100644
--- a/arch/arm/boot/dts/da850-lego-ev3.dts
+++ b/arch/arm/boot/dts/da850-lego-ev3.dts
@@ -33,11 +33,9 @@
*/
gpio_keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
label = "EV3 Brick Buttons";
pinctrl-names = "default";
- pinctrl-0 = <&button_pins>, <&button_bias>;
+ pinctrl-0 = <&button_bias>;
center {
label = "Center";
@@ -81,8 +79,6 @@
*/
leds {
compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&led_pins>;
left_green {
label = "led0:green:brick-status";
@@ -119,8 +115,6 @@
gpio-poweroff {
compatible = "gpio-poweroff";
gpios = <&gpio 107 GPIO_ACTIVE_LOW>;
- pinctrl-names = "default";
- pinctrl-0 = <&system_power_pin>;
};
sound {
@@ -136,8 +130,6 @@
* the sensor (input) ports, the motor (output) ports and the A/DC.
*/
vcc5v: regulator1 {
- pinctrl-names = "default";
- pinctrl-0 = <&vcc5v_pins>;
compatible = "regulator-fixed";
regulator-name = "vcc5v";
regulator-min-microvolt = <5000000>;
@@ -165,8 +157,6 @@
* This is the amplifier for the speaker.
*/
amp: regulator3 {
- pinctrl-names = "default";
- pinctrl-0 = <&amp_pins>;
compatible = "regulator-fixed";
regulator-name = "amp";
gpio = <&gpio 111 GPIO_ACTIVE_HIGH>;
@@ -177,8 +167,6 @@
* The EV3 can use 6-AA batteries or a rechargeable Li-ion battery pack.
*/
battery {
- pinctrl-names = "default";
- pinctrl-0 = <&battery_pins>;
compatible = "lego,ev3-battery";
io-channels = <&adc 4>, <&adc 3>;
io-channel-names = "voltage", "current";
@@ -206,73 +194,10 @@
&pmx_core {
status = "okay";
- mmc0_cd_pin: pinmux_mmc0_cd {
- pinctrl-single,bits = <
- /* GP5[14] */
- 0x2C 0x00000080 0x000000f0
- >;
- };
-
- button_pins: pinmux_button_pins {
- pinctrl-single,bits = <
- /* GP1[13] */
- 0x8 0x00000800 0x00000f00
- /* GP6[10] */
- 0x34 0x00800000 0x00f00000
- /* GP6[6] */
- 0x38 0x00000080 0x000000f0
- /* GP7[12], GP7[14], GP7[15] */
- 0x40 0x00808800 0x00f0ff00
- >;
- };
-
- led_pins: pinmux_led_pins {
- pinctrl-single,bits = <
- /* GP6[12], GP6[13], GP6[14] */
- 0x34 0x00008880 0x0000fff0
- /* GP6[7] */
- 0x38 0x00000008 0x0000000f
- >;
- };
-
- system_power_pin: pinmux_system_power {
- pinctrl-single,bits = <
- /* GP6[11] */
- 0x34 0x00080000 0x000f0000
- >;
- };
-
- vcc5v_pins: pinmux_vcc5v {
- pinctrl-single,bits = <
- /* GP6[5] */
- 0x40 0x00000080 0x000000f0
- /* GP6[3] */
- 0x4c 0x00008000 0x0000f000
- >;
- };
-
- amp_pins: pinmux_amp_pins {
- pinctrl-single,bits = <
- /* GP6[15] */
- 0x34 0x00000008 0x0000000f
- >;
- };
-
- battery_pins: pinmux_battery_pins {
- pinctrl-single,bits = <
- /* GP0[6] */
- 0x04 0x00000080 0x000000f0
- /* GP8[8] */
- 0x4c 0x00000080 0x000000f0
- >;
- };
-
ev3_lcd_pins: pinmux_lcd {
pinctrl-single,bits = <
- /* SIMO, GP2[11], GP2[12], CLK */
- 0x14 0x00188100 0x00ffff00
- /* GP5[0] */
- 0x30 0x80000000 0xf0000000
+ /* SIMO, CLK */
+ 0x14 0x00100100 0x00f00f00
>;
};
};
@@ -327,7 +252,7 @@
bus-width = <4>;
cd-gpios = <&gpio 94 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins>, <&mmc0_cd_pin>;
+ pinctrl-0 = <&mmc0_pins>;
};
&spi0 {
diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
index 12010002dbdb..f6f1597b03df 100644
--- a/arch/arm/boot/dts/da850.dtsi
+++ b/arch/arm/boot/dts/da850.dtsi
@@ -59,8 +59,18 @@
pinctrl-single,bit-per-mux;
pinctrl-single,register-width = <32>;
pinctrl-single,function-mask = <0xf>;
+ /* pin base, nr pins & gpio function */
+ pinctrl-single,gpio-range = <&range 0 17 0x8>,
+ <&range 17 8 0x4>,
+ <&range 26 8 0x4>,
+ <&range 34 80 0x8>,
+ <&range 129 31 0x8>;
status = "disabled";
+ range: gpio-range {
+ #pinctrl-single,gpio-range-cells = <3>;
+ };
+
serial0_rtscts_pins: pinmux_serial0_rtscts_pins {
pinctrl-single,bits = <
/* UART0_RTS UART0_CTS */
@@ -549,6 +559,150 @@
status = "disabled";
interrupt-controller;
#interrupt-cells = <2>;
+ gpio-ranges = <&pmx_core 0 15 1>,
+ <&pmx_core 1 14 1>,
+ <&pmx_core 2 13 1>,
+ <&pmx_core 3 12 1>,
+ <&pmx_core 4 11 1>,
+ <&pmx_core 5 10 1>,
+ <&pmx_core 6 9 1>,
+ <&pmx_core 7 8 1>,
+ <&pmx_core 8 7 1>,
+ <&pmx_core 9 6 1>,
+ <&pmx_core 10 5 1>,
+ <&pmx_core 11 4 1>,
+ <&pmx_core 12 3 1>,
+ <&pmx_core 13 2 1>,
+ <&pmx_core 14 1 1>,
+ <&pmx_core 15 0 1>,
+ <&pmx_core 16 39 1>,
+ <&pmx_core 17 38 1>,
+ <&pmx_core 18 37 1>,
+ <&pmx_core 19 36 1>,
+ <&pmx_core 20 35 1>,
+ <&pmx_core 21 34 1>,
+ <&pmx_core 22 33 1>,
+ <&pmx_core 23 32 1>,
+ <&pmx_core 24 24 1>,
+ <&pmx_core 25 22 1>,
+ <&pmx_core 26 21 1>,
+ <&pmx_core 27 20 1>,
+ <&pmx_core 28 19 1>,
+ <&pmx_core 29 18 1>,
+ <&pmx_core 30 17 1>,
+ <&pmx_core 31 16 1>,
+ <&pmx_core 32 55 1>,
+ <&pmx_core 33 54 1>,
+ <&pmx_core 34 53 1>,
+ <&pmx_core 35 52 1>,
+ <&pmx_core 36 51 1>,
+ <&pmx_core 37 50 1>,
+ <&pmx_core 38 49 1>,
+ <&pmx_core 39 48 1>,
+ <&pmx_core 40 47 1>,
+ <&pmx_core 41 46 1>,
+ <&pmx_core 42 45 1>,
+ <&pmx_core 43 44 1>,
+ <&pmx_core 44 43 1>,
+ <&pmx_core 45 42 1>,
+ <&pmx_core 46 41 1>,
+ <&pmx_core 47 40 1>,
+ <&pmx_core 48 71 1>,
+ <&pmx_core 49 70 1>,
+ <&pmx_core 50 69 1>,
+ <&pmx_core 51 68 1>,
+ <&pmx_core 52 67 1>,
+ <&pmx_core 53 66 1>,
+ <&pmx_core 54 65 1>,
+ <&pmx_core 55 64 1>,
+ <&pmx_core 56 63 1>,
+ <&pmx_core 57 62 1>,
+ <&pmx_core 58 61 1>,
+ <&pmx_core 59 60 1>,
+ <&pmx_core 60 59 1>,
+ <&pmx_core 61 58 1>,
+ <&pmx_core 62 57 1>,
+ <&pmx_core 63 56 1>,
+ <&pmx_core 64 87 1>,
+ <&pmx_core 65 86 1>,
+ <&pmx_core 66 85 1>,
+ <&pmx_core 67 84 1>,
+ <&pmx_core 68 83 1>,
+ <&pmx_core 69 82 1>,
+ <&pmx_core 70 81 1>,
+ <&pmx_core 71 80 1>,
+ <&pmx_core 72 70 1>,
+ <&pmx_core 73 78 1>,
+ <&pmx_core 74 77 1>,
+ <&pmx_core 75 76 1>,
+ <&pmx_core 76 75 1>,
+ <&pmx_core 77 74 1>,
+ <&pmx_core 78 73 1>,
+ <&pmx_core 79 72 1>,
+ <&pmx_core 80 103 1>,
+ <&pmx_core 81 102 1>,
+ <&pmx_core 82 101 1>,
+ <&pmx_core 83 100 1>,
+ <&pmx_core 84 99 1>,
+ <&pmx_core 85 98 1>,
+ <&pmx_core 86 97 1>,
+ <&pmx_core 87 96 1>,
+ <&pmx_core 88 95 1>,
+ <&pmx_core 89 94 1>,
+ <&pmx_core 90 93 1>,
+ <&pmx_core 91 92 1>,
+ <&pmx_core 92 91 1>,
+ <&pmx_core 93 90 1>,
+ <&pmx_core 94 89 1>,
+ <&pmx_core 95 88 1>,
+ <&pmx_core 96 158 1>,
+ <&pmx_core 97 157 1>,
+ <&pmx_core 98 156 1>,
+ <&pmx_core 99 155 1>,
+ <&pmx_core 100 154 1>,
+ <&pmx_core 101 129 1>,
+ <&pmx_core 102 113 1>,
+ <&pmx_core 103 112 1>,
+ <&pmx_core 104 111 1>,
+ <&pmx_core 105 110 1>,
+ <&pmx_core 106 109 1>,
+ <&pmx_core 107 108 1>,
+ <&pmx_core 108 107 1>,
+ <&pmx_core 109 106 1>,
+ <&pmx_core 110 105 1>,
+ <&pmx_core 111 104 1>,
+ <&pmx_core 112 145 1>,
+ <&pmx_core 113 144 1>,
+ <&pmx_core 114 143 1>,
+ <&pmx_core 115 142 1>,
+ <&pmx_core 116 141 1>,
+ <&pmx_core 117 140 1>,
+ <&pmx_core 118 139 1>,
+ <&pmx_core 119 138 1>,
+ <&pmx_core 120 137 1>,
+ <&pmx_core 121 136 1>,
+ <&pmx_core 122 135 1>,
+ <&pmx_core 123 134 1>,
+ <&pmx_core 124 133 1>,
+ <&pmx_core 125 132 1>,
+ <&pmx_core 126 131 1>,
+ <&pmx_core 127 130 1>,
+ <&pmx_core 128 159 1>,
+ <&pmx_core 129 31 1>,
+ <&pmx_core 130 30 1>,
+ <&pmx_core 131 20 1>,
+ <&pmx_core 132 28 1>,
+ <&pmx_core 133 27 1>,
+ <&pmx_core 134 26 1>,
+ <&pmx_core 135 23 1>,
+ <&pmx_core 136 153 1>,
+ <&pmx_core 137 152 1>,
+ <&pmx_core 138 151 1>,
+ <&pmx_core 139 150 1>,
+ <&pmx_core 140 149 1>,
+ <&pmx_core 141 148 1>,
+ <&pmx_core 142 147 1>,
+ <&pmx_core 143 146 1>;
};
pinconf: pin-controller@22c00c {
compatible = "ti,da850-pupd";
diff --git a/arch/arm/boot/dts/dm8148-t410.dts b/arch/arm/boot/dts/dm8148-t410.dts
index 6418f9cdbe83..c46a227b543d 100644
--- a/arch/arm/boot/dts/dm8148-t410.dts
+++ b/arch/arm/boot/dts/dm8148-t410.dts
@@ -77,7 +77,7 @@
DM814X_IOPAD(0x09dc, PIN_INPUT_PULLUP | 0x1) /* SD2_DAT[0] */
DM814X_IOPAD(0x09e0, PIN_INPUT | 0x1) /* SD2_CLK */
DM814X_IOPAD(0x09f4, PIN_INPUT_PULLUP | 0x2) /* SD2_CMD */
- DM814X_IOPAD(0x0920, PIN_INPUT | 40) /* SD2_SDCD */
+ DM814X_IOPAD(0x0920, PIN_INPUT | 0x40) /* SD2_SDCD */
>;
};
diff --git a/arch/arm/boot/dts/dra7-evm-common.dtsi b/arch/arm/boot/dts/dra7-evm-common.dtsi
index 05a7b1a01bc3..33230c8b2951 100644
--- a/arch/arm/boot/dts/dra7-evm-common.dtsi
+++ b/arch/arm/boot/dts/dra7-evm-common.dtsi
@@ -260,3 +260,18 @@
&pcie1_rc {
status = "okay";
};
+
+&mmc4 {
+ bus-width = <4>;
+ cap-power-off-card;
+ keep-power-in-suspend;
+ non-removable;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ wifi@2 {
+ compatible = "ti,wl1835";
+ reg = <2>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <7 IRQ_TYPE_EDGE_RISING>;
+ };
+};
diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
index f1425b0f3a54..0894593860d6 100644
--- a/arch/arm/boot/dts/dra7-evm.dts
+++ b/arch/arm/boot/dts/dra7-evm.dts
@@ -20,6 +20,16 @@
reg = <0x0 0x80000000 0x0 0x60000000>; /* 1536 MB */
};
+ evm_12v0: fixedregulator-evm_12v0 {
+ /* main supply */
+ compatible = "regulator-fixed";
+ regulator-name = "evm_12v0";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
evm_1v8_sw: fixedregulator-evm_1v8 {
compatible = "regulator-fixed";
regulator-name = "evm_1v8";
@@ -54,6 +64,48 @@
regulator-max-microvolt = <1800000>;
};
+ evm_3v3: fixedregulator-evm3v3 {
+ /* Output of Cntlr A of TPS43351-Q1 on dra7-evm */
+ compatible = "regulator-fixed";
+ regulator-name = "evm_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&evm_12v0>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ evm_5v0: fixedregulator-evm_5v0 {
+ /* Output of Cntlr B of TPS43351-Q1 on dra7-evm */
+ compatible = "regulator-fixed";
+ regulator-name = "evm_5v0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&evm_12v0>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ evm_3v6: fixedregulator-evm_3v6 {
+ compatible = "regulator-fixed";
+ regulator-name = "evm_3v6";
+ regulator-min-microvolt = <3600000>;
+ regulator-max-microvolt = <3600000>;
+ vin-supply = <&evm_5v0>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vmmcwl_fixed: fixedregulator-mmcwl {
+ compatible = "regulator-fixed";
+ regulator-name = "vmmcwl_fixed";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ gpio = <&gpio5 8 0>;
+ startup-delay-us = <70000>;
+ enable-active-high;
+ };
+
extcon_usb2: extcon_usb2 {
compatible = "linux,extcon-usb-gpio";
id-gpio = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>;
@@ -325,6 +377,7 @@
vmmc-supply = <&evm_1v8_sw>;
vqmmc-supply = <&evm_1v8_sw>;
bus-width = <8>;
+ non-removable;
pinctrl-names = "default", "hs", "ddr_1_8v-rev11", "ddr_1_8v", "hs200_1_8v-rev11", "hs200_1_8v";
pinctrl-0 = <&mmc2_pins_default>;
pinctrl-1 = <&mmc2_pins_hs>;
@@ -334,6 +387,21 @@
pinctrl-5 = <&mmc2_pins_hs200 &mmc2_iodelay_hs200_rev20_conf>;
};
+&mmc4 {
+ status = "okay";
+ vmmc-supply = <&evm_3v6>;
+ vqmmc-supply = <&vmmcwl_fixed>;
+ pinctrl-names = "default-rev11", "default", "hs-rev11", "hs", "sdr12-rev11", "sdr12", "sdr25-rev11", "sdr25";
+ pinctrl-0 = <&mmc4_pins_default &mmc4_iodelay_ds_rev11_conf>;
+ pinctrl-1 = <&mmc4_pins_default &mmc4_iodelay_ds_rev20_conf>;
+ pinctrl-2 = <&mmc4_pins_hs &mmc4_iodelay_sdr12_hs_sdr25_rev11_conf>;
+ pinctrl-3 = <&mmc4_pins_hs &mmc4_iodelay_sdr12_hs_sdr25_rev20_conf>;
+ pinctrl-4 = <&mmc4_pins_sdr12 &mmc4_iodelay_sdr12_hs_sdr25_rev11_conf>;
+ pinctrl-5 = <&mmc4_pins_sdr12 &mmc4_iodelay_sdr12_hs_sdr25_rev20_conf>;
+ pinctrl-6 = <&mmc4_pins_sdr25 &mmc4_iodelay_sdr12_hs_sdr25_rev11_conf>;
+ pinctrl-7 = <&mmc4_pins_sdr25 &mmc4_iodelay_sdr12_hs_sdr25_rev20_conf>;
+};
+
&cpu0 {
vdd-supply = <&smps123_reg>;
};
diff --git a/arch/arm/boot/dts/dra7-mmc-iodelay.dtsi b/arch/arm/boot/dts/dra7-mmc-iodelay.dtsi
new file mode 100644
index 000000000000..aa0947266526
--- /dev/null
+++ b/arch/arm/boot/dts/dra7-mmc-iodelay.dtsi
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * MMC IOdelay values for TI's DRA7xx SoCs.
+ * Copyright (C) 2018 Texas Instruments
+ * Author: Kishon Vijay Abraham I <kishon@ti.com>
+ */
+
+&dra7_pmx_core {
+ mmc1_pins_default_no_clk_pu: mmc1_pins_default_no_clk_pu {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mmc1_clk.clk */
+ DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
+ DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
+ DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
+ DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
+ DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
+ >;
+ };
+};
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index f4ddd86f2c77..9dcd14edc202 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -1079,17 +1079,15 @@
};
mmc1: mmc@4809c000 {
- compatible = "ti,omap4-hsmmc";
+ compatible = "ti,dra7-sdhci";
reg = <0x4809c000 0x400>;
interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mmc1";
- ti,dual-volt;
- ti,needs-special-reset;
- dmas = <&sdma_xbar 61>, <&sdma_xbar 62>;
- dma-names = "tx", "rx";
status = "disabled";
pbias-supply = <&pbias_mmc_reg>;
max-frequency = <192000000>;
+ mmc-ddr-1_8v;
+ mmc-ddr-3_3v;
};
hdqw1w: 1w@480b2000 {
@@ -1100,40 +1098,40 @@
};
mmc2: mmc@480b4000 {
- compatible = "ti,omap4-hsmmc";
+ compatible = "ti,dra7-sdhci";
reg = <0x480b4000 0x400>;
interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mmc2";
- ti,needs-special-reset;
- dmas = <&sdma_xbar 47>, <&sdma_xbar 48>;
- dma-names = "tx", "rx";
status = "disabled";
max-frequency = <192000000>;
+ /* SDR104/DDR50/SDR50 bits in CAPA2 is not supported */
+ sdhci-caps-mask = <0x7 0x0>;
+ mmc-hs200-1_8v;
+ mmc-ddr-1_8v;
+ mmc-ddr-3_3v;
};
mmc3: mmc@480ad000 {
- compatible = "ti,omap4-hsmmc";
+ compatible = "ti,dra7-sdhci";
reg = <0x480ad000 0x400>;
interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mmc3";
- ti,needs-special-reset;
- dmas = <&sdma_xbar 77>, <&sdma_xbar 78>;
- dma-names = "tx", "rx";
status = "disabled";
/* Errata i887 limits max-frequency of MMC3 to 64 MHz */
max-frequency = <64000000>;
+ /* SDMA is not supported */
+ sdhci-caps-mask = <0x0 0x400000>;
};
mmc4: mmc@480d1000 {
- compatible = "ti,omap4-hsmmc";
+ compatible = "ti,dra7-sdhci";
reg = <0x480d1000 0x400>;
interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mmc4";
- ti,needs-special-reset;
- dmas = <&sdma_xbar 57>, <&sdma_xbar 58>;
- dma-names = "tx", "rx";
status = "disabled";
max-frequency = <192000000>;
+ /* SDMA is not supported */
+ sdhci-caps-mask = <0x0 0x400000>;
};
mmu0_dsp1: mmu@40d01000 {
diff --git a/arch/arm/boot/dts/dra71-evm.dts b/arch/arm/boot/dts/dra71-evm.dts
index ebc4bbae981e..b7aeaeeead3b 100644
--- a/arch/arm/boot/dts/dra71-evm.dts
+++ b/arch/arm/boot/dts/dra71-evm.dts
@@ -7,6 +7,7 @@
*/
#include "dra72-evm-common.dtsi"
+#include "dra7-mmc-iodelay.dtsi"
#include "dra72x-mmc-iodelay.dtsi"
#include <dt-bindings/net/ti-dp83867.h>
@@ -50,19 +51,6 @@
};
};
-&dra7_pmx_core {
- mmc1_pins_default: mmc1_pins_default {
- pinctrl-single,pins = <
- DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mmc1_clk.clk */
- DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
- DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
- DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
- DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
- DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
- >;
- };
-};
-
&i2c1 {
status = "okay";
clock-frequency = <400000>;
@@ -187,7 +175,7 @@
&mmc1 {
pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104";
- pinctrl-0 = <&mmc1_pins_default>;
+ pinctrl-0 = <&mmc1_pins_default_no_clk_pu>;
pinctrl-1 = <&mmc1_pins_hs>;
pinctrl-2 = <&mmc1_pins_sdr12>;
pinctrl-3 = <&mmc1_pins_sdr25>;
@@ -204,6 +192,7 @@
pinctrl-2 = <&mmc2_pins_ddr_rev20 &mmc2_iodelay_ddr_conf>;
pinctrl-3 = <&mmc2_pins_hs200 &mmc2_iodelay_hs200_rev20_conf>;
vmmc-supply = <&evm_1v8_sw>;
+ vqmmc-supply = <&evm_1v8_sw>;
};
&mac {
diff --git a/arch/arm/boot/dts/dra72-evm-common.dtsi b/arch/arm/boot/dts/dra72-evm-common.dtsi
index e85f560a2f78..df174f5c15d1 100644
--- a/arch/arm/boot/dts/dra72-evm-common.dtsi
+++ b/arch/arm/boot/dts/dra72-evm-common.dtsi
@@ -44,6 +44,16 @@
regulator-boot-on;
};
+ evm_3v6: fixedregulator-evm_3v6 {
+ compatible = "regulator-fixed";
+ regulator-name = "evm_3v6";
+ regulator-min-microvolt = <3600000>;
+ regulator-max-microvolt = <3600000>;
+ vin-supply = <&evm_5v0>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
vsys_3v3: fixedregulator-vsys3v3 {
/* Output 2 of TPS43351QDAPRQ1 on dra72-evm */
/* Output 2 of LM5140QRWGTQ1 on dra71-evm */
@@ -171,36 +181,18 @@
clocks = <&atl_clkin2_ck>;
};
};
-};
-
-&dra7_pmx_core {
- mmc1_pins_default: mmc1_pins_default {
- pinctrl-single,pins = <
- DRA7XX_CORE_IOPAD(0x376c, PIN_INPUT | MUX_MODE14) /* mmc1sdcd.gpio219 */
- DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
- DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
- DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
- DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
- DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
- DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
- >;
- };
- mmc2_pins_default: mmc2_pins_default {
- pinctrl-single,pins = <
- DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
- DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
- DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
- DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
- DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
- DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
- DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
- DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
- DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
- DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
- >;
+ vmmcwl_fixed: fixedregulator-mmcwl {
+ compatible = "regulator-fixed";
+ regulator-name = "vmmcwl_fixed";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ gpio = <&gpio5 8 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
};
+};
+&dra7_pmx_core {
dcan1_pins_default: dcan1_pins_default {
pinctrl-single,pins = <
DRA7XX_CORE_IOPAD(0x37d0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */
@@ -421,10 +413,33 @@
pinctrl-names = "default";
pinctrl-0 = <&mmc2_pins_default>;
bus-width = <8>;
- ti,non-removable;
+ non-removable;
max-frequency = <192000000>;
};
+&mmc4 {
+ status = "okay";
+ vmmc-supply = <&evm_3v6>;
+ vqmmc-supply = <&vmmcwl_fixed>;
+ bus-width = <4>;
+ cap-power-off-card;
+ keep-power-in-suspend;
+ non-removable;
+ pinctrl-names = "default", "hs", "sdr12", "sdr25";
+ pinctrl-0 = <&mmc4_pins_default>;
+ pinctrl-1 = <&mmc4_pins_default>;
+ pinctrl-2 = <&mmc4_pins_default>;
+ pinctrl-3 = <&mmc4_pins_default>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ wifi@2 {
+ compatible = "ti,wl1835";
+ reg = <2>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <7 IRQ_TYPE_EDGE_RISING>;
+ };
+};
+
&mac {
status = "okay";
};
diff --git a/arch/arm/boot/dts/dra72x-mmc-iodelay.dtsi b/arch/arm/boot/dts/dra72x-mmc-iodelay.dtsi
index 088013c6dc6e..edad87c4292c 100644
--- a/arch/arm/boot/dts/dra72x-mmc-iodelay.dtsi
+++ b/arch/arm/boot/dts/dra72x-mmc-iodelay.dtsi
@@ -202,6 +202,17 @@
DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
>;
};
+
+ mmc4_pins_default: mmc4_pins_default {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x37e8, PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_ctsn.mmc4_clk */
+ DRA7XX_CORE_IOPAD(0x37ec, PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_rtsn.mmc4_cmd */
+ DRA7XX_CORE_IOPAD(0x37f0, PIN_INPUT_PULLUP | MUX_MODE3) /* uart2_rxd.mmc4_dat0 */
+ DRA7XX_CORE_IOPAD(0x37f4, PIN_INPUT_PULLUP | MUX_MODE3) /* uart2_txd.mmc4_dat1 */
+ DRA7XX_CORE_IOPAD(0x37f8, PIN_INPUT_PULLUP | MUX_MODE3) /* uart2_ctsn.mmc4_dat2 */
+ DRA7XX_CORE_IOPAD(0x37fc, PIN_INPUT_PULLUP | MUX_MODE3) /* uart2_rtsn.mmc4_dat3 */
+ >;
+ };
};
&dra7_iodelay_core {
diff --git a/arch/arm/boot/dts/dra76-evm.dts b/arch/arm/boot/dts/dra76-evm.dts
index 2deb96405d06..c07f0051844d 100644
--- a/arch/arm/boot/dts/dra76-evm.dts
+++ b/arch/arm/boot/dts/dra76-evm.dts
@@ -42,6 +42,16 @@
regulator-boot-on;
};
+ vio_3v6: fixedregulator-vio_3v6 {
+ compatible = "regulator-fixed";
+ regulator-name = "vio_3v6";
+ regulator-min-microvolt = <3600000>;
+ regulator-max-microvolt = <3600000>;
+ vin-supply = <&vsys_5v0>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
vsys_3v3: fixedregulator-vsys3v3 {
/* Output of Cntlr A of TPS43351-Q1 on dra76-evm */
compatible = "regulator-fixed";
@@ -81,6 +91,16 @@
vin-supply = <&smps5_reg>;
};
+ vmmcwl_fixed: fixedregulator-mmcwl {
+ compatible = "regulator-fixed";
+ regulator-name = "vmmcwl_fixed";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ gpio = <&gpio5 8 0>; /* gpio5_8 */
+ startup-delay-us = <70000>;
+ enable-active-high;
+ };
+
vtt_fixed: fixedregulator-vtt {
compatible = "regulator-fixed";
regulator-name = "vtt_fixed";
@@ -307,7 +327,7 @@
&mmc1 {
status = "okay";
vmmc-supply = <&vio_3v3_sd>;
- vmmc_aux-supply = <&ldo4_reg>;
+ vqmmc-supply = <&ldo4_reg>;
bus-width = <4>;
/*
* SDCD signal is not being used here - using the fact that GPIO mode
@@ -324,6 +344,7 @@
vmmc-supply = <&vio_1v8>;
vqmmc-supply = <&vio_1v8>;
bus-width = <8>;
+ non-removable;
pinctrl-names = "default", "hs", "ddr_1_8v", "hs200_1_8v";
pinctrl-0 = <&mmc2_pins_default>;
pinctrl-1 = <&mmc2_pins_default>;
@@ -331,6 +352,17 @@
pinctrl-3 = <&mmc2_pins_hs200 &mmc2_iodelay_hs200_conf>;
};
+&mmc4 {
+ status = "okay";
+ vmmc-supply = <&vio_3v6>;
+ vqmmc-supply = <&vmmcwl_fixed>;
+ pinctrl-names = "default", "hs", "sdr12", "sdr25";
+ pinctrl-0 = <&mmc4_pins_hs &mmc4_iodelay_default_conf>;
+ pinctrl-1 = <&mmc4_pins_hs &mmc4_iodelay_manual1_conf>;
+ pinctrl-2 = <&mmc4_pins_hs &mmc4_iodelay_manual1_conf>;
+ pinctrl-3 = <&mmc4_pins_hs &mmc4_iodelay_manual1_conf>;
+};
+
/* No RTC on this device */
&rtc {
status = "disabled";
diff --git a/arch/arm/boot/dts/exynos-syscon-restart.dtsi b/arch/arm/boot/dts/exynos-syscon-restart.dtsi
index 4b3dd0549a54..ecf416690a15 100644
--- a/arch/arm/boot/dts/exynos-syscon-restart.dtsi
+++ b/arch/arm/boot/dts/exynos-syscon-restart.dtsi
@@ -3,22 +3,18 @@
* Samsung's Exynos SoC syscon reboot/poweroff nodes common definition.
*/
-/ {
- soc {
- compatible = "simple-bus";
-
- poweroff: syscon-poweroff {
- compatible = "syscon-poweroff";
- regmap = <&pmu_system_controller>;
- offset = <0x330C>; /* PS_HOLD_CONTROL */
- mask = <0x5200>; /* reset value */
- };
+&pmu_system_controller {
+ poweroff: syscon-poweroff {
+ compatible = "syscon-poweroff";
+ regmap = <&pmu_system_controller>;
+ offset = <0x330C>; /* PS_HOLD_CONTROL */
+ mask = <0x5200>; /* reset value */
+ };
- reboot: syscon-reboot {
- compatible = "syscon-reboot";
- regmap = <&pmu_system_controller>;
- offset = <0x0400>; /* SWRESET */
- mask = <0x1>;
- };
+ reboot: syscon-reboot {
+ compatible = "syscon-reboot";
+ regmap = <&pmu_system_controller>;
+ offset = <0x0400>; /* SWRESET */
+ mask = <0x1>;
};
};
diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts
index 2c3460781cc6..2a6b828c01b7 100644
--- a/arch/arm/boot/dts/exynos3250-rinato.dts
+++ b/arch/arm/boot/dts/exynos3250-rinato.dts
@@ -24,6 +24,10 @@
i2c7 = &i2c_max77836;
};
+ chosen {
+ stdout-path = &serial_1;
+ };
+
memory@40000000 {
device_type = "memory";
reg = <0x40000000 0x1ff00000>;
diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi
index 0a5f989d963b..962af97c1883 100644
--- a/arch/arm/boot/dts/exynos3250.dtsi
+++ b/arch/arm/boot/dts/exynos3250.dtsi
@@ -15,7 +15,6 @@
*/
#include "exynos4-cpu-thermal.dtsi"
-#include "exynos-syscon-restart.dtsi"
#include <dt-bindings/clock/exynos3250.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
@@ -919,3 +918,4 @@
};
#include "exynos3250-pinctrl.dtsi"
+#include "exynos-syscon-restart.dtsi"
diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index 909a9f2bf5be..dfe41b698745 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -20,7 +20,6 @@
#include <dt-bindings/clock/exynos-audss-clk.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
-#include "exynos-syscon-restart.dtsi"
/ {
interrupt-parent = <&gic>;
@@ -1025,3 +1024,5 @@
};
};
};
+
+#include "exynos-syscon-restart.dtsi"
diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts
index 9a310e841d5d..2ab99f9f3d0a 100644
--- a/arch/arm/boot/dts/exynos4210-origen.dts
+++ b/arch/arm/boot/dts/exynos4210-origen.dts
@@ -34,26 +34,17 @@
stdout-path = &serial_2;
};
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- mmc_reg: regulator@0 {
- compatible = "regulator-fixed";
- reg = <0>;
- regulator-name = "VMEM_VDD_2.8V";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
+ mmc_reg: voltage-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "VMEM_VDD_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
};
gpio_keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
up {
label = "Up";
@@ -131,12 +122,23 @@
cpu0-supply = <&buck1_reg>;
};
+&exynos_usbphy {
+ status = "okay";
+};
+
&fimd {
pinctrl-0 = <&lcd_en &lcd_clk &lcd_data24 &pwm0_out>;
pinctrl-names = "default";
status = "okay";
};
+&hsotg {
+ vusb_d-supply = <&ldo3_reg>;
+ vusb_a-supply = <&ldo8_reg>;
+ dr_mode = "peripheral";
+ status = "okay";
+};
+
&i2c_0 {
status = "okay";
samsung,i2c-sda-delay = <100>;
diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts
index eaeeb4f6b84a..6f1d76cb7951 100644
--- a/arch/arm/boot/dts/exynos4210-trats.dts
+++ b/arch/arm/boot/dts/exynos4210-trats.dts
@@ -259,8 +259,8 @@
reg = <0x48>;
interrupt-parent = <&gpx0>;
interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
- x-size = <720>;
- y-size = <1280>;
+ touchscreen-size-x = <720>;
+ touchscreen-size-y = <1280>;
avdd-supply = <&tsp_reg>;
vdd-supply = <&tsp_reg>;
};
diff --git a/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi b/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi
index ee8e1f445370..30eee5942eff 100644
--- a/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi
+++ b/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi
@@ -15,24 +15,22 @@
i2c10 = &i2c_cm36651;
};
- regulators {
- lcd_vdd3_reg: voltage-regulator-2 {
- compatible = "regulator-fixed";
- regulator-name = "LCD_VDD_2.2V";
- regulator-min-microvolt = <2200000>;
- regulator-max-microvolt = <2200000>;
- gpio = <&gpc0 1 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
+ lcd_vdd3_reg: voltage-regulator-6 {
+ compatible = "regulator-fixed";
+ regulator-name = "LCD_VDD_2.2V";
+ regulator-min-microvolt = <2200000>;
+ regulator-max-microvolt = <2200000>;
+ gpio = <&gpc0 1 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
- ps_als_reg: voltage-regulator-5 {
- compatible = "regulator-fixed";
- regulator-name = "LED_A_3.0V";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- gpio = <&gpj0 5 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
+ ps_als_reg: voltage-regulator-7 {
+ compatible = "regulator-fixed";
+ regulator-name = "LED_A_3.0V";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ gpio = <&gpj0 5 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
};
i2c_ak8975: i2c-gpio-0 {
@@ -120,8 +118,8 @@
reg = <0x48>;
interrupt-parent = <&gpm2>;
interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
- x-size = <720>;
- y-size = <1280>;
+ touchscreen-size-x = <720>;
+ touchscreen-size-y = <1280>;
avdd-supply = <&ldo23_reg>;
vdd-supply = <&ldo24_reg>;
};
diff --git a/arch/arm/boot/dts/exynos4412-midas.dtsi b/arch/arm/boot/dts/exynos4412-midas.dtsi
index 76f2b30f1731..dc11ca1673e8 100644
--- a/arch/arm/boot/dts/exynos4412-midas.dtsi
+++ b/arch/arm/boot/dts/exynos4412-midas.dtsi
@@ -46,56 +46,50 @@
};
};
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- cam_io_reg: voltage-regulator-1 {
- compatible = "regulator-fixed";
- regulator-name = "CAM_SENSOR_A";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- enable-active-high;
- status = "disabled";
- };
+ cam_io_reg: voltage-regulator-1 {
+ compatible = "regulator-fixed";
+ regulator-name = "CAM_SENSOR_A";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ enable-active-high;
+ status = "disabled";
+ };
- cam_af_reg: voltage-regulator-3 {
- compatible = "regulator-fixed";
- regulator-name = "CAM_AF";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- enable-active-high;
- status = "disabled";
- };
+ cam_af_reg: voltage-regulator-2 {
+ compatible = "regulator-fixed";
+ regulator-name = "CAM_AF";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ enable-active-high;
+ status = "disabled";
+ };
- vsil12: voltage-regulator-6 {
- compatible = "regulator-fixed";
- regulator-name = "VSIL_1.2V";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- vin-supply = <&buck7_reg>;
- };
+ vsil12: voltage-regulator-3 {
+ compatible = "regulator-fixed";
+ regulator-name = "VSIL_1.2V";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&buck7_reg>;
+ };
- vcc33mhl: voltage-regulator-7 {
- compatible = "regulator-fixed";
- regulator-name = "VCC_3.3_MHL";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
+ vcc33mhl: voltage-regulator-4 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_3.3_MHL";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
- vcc18mhl: voltage-regulator-8 {
- compatible = "regulator-fixed";
- regulator-name = "VCC_1.8_MHL";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
+ vcc18mhl: voltage-regulator-5 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_1.8_MHL";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
};
gpio-keys {
diff --git a/arch/arm/boot/dts/exynos4412-n710x.dts b/arch/arm/boot/dts/exynos4412-n710x.dts
index eb402a0d6651..fe2bfd76cc4e 100644
--- a/arch/arm/boot/dts/exynos4412-n710x.dts
+++ b/arch/arm/boot/dts/exynos4412-n710x.dts
@@ -13,15 +13,13 @@
/* bootargs are passed in by bootloader */
- regulators {
- cam_vdda_reg: voltage-regulator-9 {
- compatible = "regulator-fixed";
- regulator-name = "CAM_SENSOR_CORE_1.2V";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- gpio = <&gpm4 1 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
+ cam_vdda_reg: voltage-regulator-6 {
+ compatible = "regulator-fixed";
+ regulator-name = "CAM_SENSOR_CORE_1.2V";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ gpio = <&gpm4 1 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
};
};
diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
index d7ad07fd48f9..a09e46c9dbc0 100644
--- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
+++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
@@ -37,20 +37,14 @@
};
sound: sound {
- compatible = "simple-audio-card";
+ compatible = "hardkernel,odroid-xu4-audio";
- simple-audio-card,format = "i2s";
- simple-audio-card,bitclock-master = <&link0_codec>;
- simple-audio-card,frame-master = <&link0_codec>;
-
- simple-audio-card,cpu {
+ cpu {
sound-dai = <&i2s0 0>;
- system-clock-frequency = <19200000>;
};
- link0_codec: simple-audio-card,codec {
- sound-dai = <&max98090>;
- clocks = <&i2s0 CLK_I2S_CDCLK>;
+ codec {
+ sound-dai = <&hdmi>, <&max98090>;
};
};
@@ -142,14 +136,25 @@
pinctrl-0 = <>;
};
+&clock {
+ assigned-clocks = <&clock CLK_FOUT_EPLL>;
+ assigned-clock-rates = <45158401>;
+};
+
&clock_audss {
assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>,
<&clock_audss EXYNOS_MOUT_I2S>,
<&clock_audss EXYNOS_DOUT_SRP>,
- <&clock_audss EXYNOS_DOUT_AUD_BUS>;
+ <&clock_audss EXYNOS_DOUT_AUD_BUS>,
+ <&clock_audss EXYNOS_DOUT_I2S>;
+
assigned-clock-parents = <&clock CLK_FOUT_EPLL>,
- <&clock_audss EXYNOS_MOUT_AUDSS>;
- assigned-clock-rates = <0>, <0>, <192000000>, <19200000>;
+ <&clock_audss EXYNOS_MOUT_AUDSS>;
+
+ assigned-clock-rates = <0>, <0>,
+ <196608001>,
+ <(196608001 / 2)>,
+ <(196608001 / 8)>;
};
&cpu0 {
@@ -498,6 +503,8 @@
pinctrl-0 = <&i2s0_bus>;
pinctrl-names = "default";
status = "okay";
+ assigned-clocks = <&i2s0 CLK_I2S_RCLK_SRC>;
+ assigned-clock-parents = <&clock_audss EXYNOS_SCLK_I2S>;
};
&mixer {
diff --git a/arch/arm/boot/dts/exynos4412-odroidu3.dts b/arch/arm/boot/dts/exynos4412-odroidu3.dts
index bdcd4523cc1c..459919b65df8 100644
--- a/arch/arm/boot/dts/exynos4412-odroidu3.dts
+++ b/arch/arm/boot/dts/exynos4412-odroidu3.dts
@@ -113,11 +113,11 @@
};
&sound {
- simple-audio-card,name = "Odroid-U3";
- simple-audio-card,widgets =
+ model = "Odroid-U3";
+ samsung,audio-widgets =
"Headphone", "Headphone Jack",
"Speakers", "Speakers";
- simple-audio-card,routing =
+ samsung,audio-routing =
"Headphone Jack", "HPL",
"Headphone Jack", "HPR",
"Headphone Jack", "MICBIAS",
diff --git a/arch/arm/boot/dts/exynos4412-odroidx.dts b/arch/arm/boot/dts/exynos4412-odroidx.dts
index 2dff129bc2ad..348556fcdd9d 100644
--- a/arch/arm/boot/dts/exynos4412-odroidx.dts
+++ b/arch/arm/boot/dts/exynos4412-odroidx.dts
@@ -97,12 +97,12 @@
};
&sound {
- simple-audio-card,name = "Odroid-X";
- simple-audio-card,widgets =
+ model = "Odroid-X";
+ samsung,audio-widgets =
"Headphone", "Headphone Jack",
"Microphone", "Mic Jack",
"Microphone", "DMIC";
- simple-audio-card,routing =
+ samsung,audio-routing =
"Headphone Jack", "HPL",
"Headphone Jack", "HPR",
"IN1", "Mic Jack",
diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts
index 1514f0dbaff8..346f71932457 100644
--- a/arch/arm/boot/dts/exynos4412-origen.dts
+++ b/arch/arm/boot/dts/exynos4412-origen.dts
@@ -90,7 +90,7 @@
samsung,vbus-gpio = <&gpx3 5 1>;
status = "okay";
- port@1{
+ port@1 {
status = "okay";
};
port@2 {
diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi
index 2ae1ab602f4b..7b43c10c510b 100644
--- a/arch/arm/boot/dts/exynos4412.dtsi
+++ b/arch/arm/boot/dts/exynos4412.dtsi
@@ -298,7 +298,7 @@
status = "disabled";
};
- sysmmu_g2d: sysmmu@10A40000{
+ sysmmu_g2d: sysmmu@10a40000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x10A40000 0x1000>;
interrupt-parent = <&combiner>;
diff --git a/arch/arm/boot/dts/exynos5.dtsi b/arch/arm/boot/dts/exynos5.dtsi
index f8d7de1144f1..5d2f0a06fbef 100644
--- a/arch/arm/boot/dts/exynos5.dtsi
+++ b/arch/arm/boot/dts/exynos5.dtsi
@@ -12,7 +12,6 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
-#include "exynos-syscon-restart.dtsi"
/ {
interrupt-parent = <&gic>;
@@ -197,8 +196,6 @@
reg = <0x145B0000 0x1000>;
interrupts = <10 3>;
interrupt-parent = <&combiner>;
- #address-cells = <1>;
- #size-cells = <0>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index 45283a6c5eee..2daf505b3d08 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -132,10 +132,6 @@
reg = <0x100440A0 0x20>;
#power-domain-cells = <0>;
label = "DISP1";
- clocks = <&clock CLK_FIN_PLL>,
- <&clock CLK_MOUT_ACLK200_DISP1_SUB>,
- <&clock CLK_MOUT_ACLK300_DISP1_SUB>;
- clock-names = "oscclk", "clk0", "clk1";
};
pd_mau: power-domain@100440c0 {
@@ -882,7 +878,7 @@
#iommu-cells = <0>;
};
- sysmmu_fimc_dis1: sysmmu@132E0000{
+ sysmmu_fimc_dis1: sysmmu@132e0000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x132E0000 0x1000>;
interrupt-parent = <&combiner>;
@@ -1117,3 +1113,4 @@
};
#include "exynos5250-pinctrl.dtsi"
+#include "exynos-syscon-restart.dtsi"
diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi
index 55509c690328..20e789ea136f 100644
--- a/arch/arm/boot/dts/exynos5410.dtsi
+++ b/arch/arm/boot/dts/exynos5410.dtsi
@@ -439,3 +439,4 @@
};
#include "exynos5410-pinctrl.dtsi"
+#include "exynos-syscon-restart.dtsi"
diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts
index 244f0091c21f..57c2332bf282 100644
--- a/arch/arm/boot/dts/exynos5420-peach-pit.dts
+++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts
@@ -29,7 +29,7 @@
aliases {
/* Assign 20 so we don't get confused w/ builtin ones */
- i2c20 = "/spi@12d40000/cros-ec@0/i2c-tunnel";
+ i2c20 = &i2c_tunnel;
};
backlight: backlight {
@@ -970,7 +970,7 @@
samsung,spi-feedback-delay = <1>;
};
- i2c-tunnel {
+ i2c_tunnel: i2c-tunnel {
compatible = "google,cros-ec-i2c-tunnel";
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index 2f3cb2a97f71..f4e8c5823bc2 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -276,10 +276,6 @@
reg = <0x10044000 0x20>;
#power-domain-cells = <0>;
label = "GSC";
- clocks = <&clock CLK_FIN_PLL>,
- <&clock CLK_MOUT_USER_ACLK300_GSCL>,
- <&clock CLK_GSCL0>, <&clock CLK_GSCL1>;
- clock-names = "oscclk", "clk0", "asb0", "asb1";
};
isp_pd: power-domain@10044020 {
@@ -292,10 +288,6 @@
mfc_pd: power-domain@10044060 {
compatible = "samsung,exynos4210-pd";
reg = <0x10044060 0x20>;
- clocks = <&clock CLK_FIN_PLL>,
- <&clock CLK_MOUT_USER_ACLK333>,
- <&clock CLK_ACLK333>;
- clock-names = "oscclk", "clk0","asb0";
#power-domain-cells = <0>;
label = "MFC";
};
@@ -312,12 +304,6 @@
reg = <0x100440C0 0x20>;
#power-domain-cells = <0>;
label = "DISP";
- clocks = <&clock CLK_FIN_PLL>,
- <&clock CLK_MOUT_USER_ACLK200_DISP1>,
- <&clock CLK_MOUT_USER_ACLK300_DISP1>,
- <&clock CLK_MOUT_USER_ACLK400_DISP1>,
- <&clock CLK_FIMD1>, <&clock CLK_MIXER>;
- clock-names = "oscclk", "clk0", "clk1", "clk2", "asb0", "asb1";
};
mau_pd: power-domain@100440e0 {
@@ -687,6 +673,36 @@
iommus = <&sysmmu_gscl1>;
};
+ scaler_0: scaler@12800000 {
+ compatible = "samsung,exynos5420-scaler";
+ reg = <0x12800000 0x1294>;
+ interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clock CLK_MSCL0>;
+ clock-names = "mscl";
+ power-domains = <&msc_pd>;
+ iommus = <&sysmmu_scaler0r>, <&sysmmu_scaler0w>;
+ };
+
+ scaler_1: scaler@12810000 {
+ compatible = "samsung,exynos5420-scaler";
+ reg = <0x12810000 0x1294>;
+ interrupts = <0 221 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clock CLK_MSCL1>;
+ clock-names = "mscl";
+ power-domains = <&msc_pd>;
+ iommus = <&sysmmu_scaler1r>, <&sysmmu_scaler1w>;
+ };
+
+ scaler_2: scaler@12820000 {
+ compatible = "samsung,exynos5420-scaler";
+ reg = <0x12820000 0x1294>;
+ interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clock CLK_MSCL2>;
+ clock-names = "mscl";
+ power-domains = <&msc_pd>;
+ iommus = <&sysmmu_scaler2r>, <&sysmmu_scaler2w>;
+ };
+
jpeg_0: jpeg@11f50000 {
compatible = "samsung,exynos5420-jpeg";
reg = <0x11F50000 0x1000>;
@@ -761,7 +777,7 @@
#include "exynos5420-tmu-sensor-conf.dtsi"
};
- sysmmu_g2dr: sysmmu@0x10A60000 {
+ sysmmu_g2dr: sysmmu@10a60000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x10A60000 0x1000>;
interrupt-parent = <&combiner>;
@@ -771,7 +787,7 @@
#iommu-cells = <0>;
};
- sysmmu_g2dw: sysmmu@0x10A70000 {
+ sysmmu_g2dw: sysmmu@10a70000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x10A70000 0x1000>;
interrupt-parent = <&combiner>;
@@ -781,7 +797,7 @@
#iommu-cells = <0>;
};
- sysmmu_tv: sysmmu@0x14650000 {
+ sysmmu_tv: sysmmu@14650000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x14650000 0x1000>;
interrupt-parent = <&combiner>;
@@ -792,7 +808,7 @@
#iommu-cells = <0>;
};
- sysmmu_gscl0: sysmmu@0x13E80000 {
+ sysmmu_gscl0: sysmmu@13e80000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x13E80000 0x1000>;
interrupt-parent = <&combiner>;
@@ -803,7 +819,7 @@
#iommu-cells = <0>;
};
- sysmmu_gscl1: sysmmu@0x13E90000 {
+ sysmmu_gscl1: sysmmu@13e90000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x13E90000 0x1000>;
interrupt-parent = <&combiner>;
@@ -814,65 +830,71 @@
#iommu-cells = <0>;
};
- sysmmu_scaler0r: sysmmu@0x12880000 {
+ sysmmu_scaler0r: sysmmu@12880000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x12880000 0x1000>;
interrupt-parent = <&combiner>;
interrupts = <22 4>;
clock-names = "sysmmu", "master";
clocks = <&clock CLK_SMMU_MSCL0>, <&clock CLK_MSCL0>;
+ power-domains = <&msc_pd>;
#iommu-cells = <0>;
};
- sysmmu_scaler1r: sysmmu@0x12890000 {
+ sysmmu_scaler1r: sysmmu@12890000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x12890000 0x1000>;
interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "sysmmu", "master";
clocks = <&clock CLK_SMMU_MSCL1>, <&clock CLK_MSCL1>;
+ power-domains = <&msc_pd>;
#iommu-cells = <0>;
};
- sysmmu_scaler2r: sysmmu@0x128A0000 {
+ sysmmu_scaler2r: sysmmu@128a0000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x128A0000 0x1000>;
interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "sysmmu", "master";
clocks = <&clock CLK_SMMU_MSCL2>, <&clock CLK_MSCL2>;
+ power-domains = <&msc_pd>;
#iommu-cells = <0>;
};
- sysmmu_scaler0w: sysmmu@0x128C0000 {
+ sysmmu_scaler0w: sysmmu@128c0000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x128C0000 0x1000>;
interrupt-parent = <&combiner>;
interrupts = <27 2>;
clock-names = "sysmmu", "master";
clocks = <&clock CLK_SMMU_MSCL0>, <&clock CLK_MSCL0>;
+ power-domains = <&msc_pd>;
#iommu-cells = <0>;
};
- sysmmu_scaler1w: sysmmu@0x128D0000 {
+ sysmmu_scaler1w: sysmmu@128d0000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x128D0000 0x1000>;
interrupt-parent = <&combiner>;
interrupts = <22 6>;
clock-names = "sysmmu", "master";
clocks = <&clock CLK_SMMU_MSCL1>, <&clock CLK_MSCL1>;
+ power-domains = <&msc_pd>;
#iommu-cells = <0>;
};
- sysmmu_scaler2w: sysmmu@0x128E0000 {
+ sysmmu_scaler2w: sysmmu@128e0000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x128E0000 0x1000>;
interrupt-parent = <&combiner>;
interrupts = <19 6>;
clock-names = "sysmmu", "master";
clocks = <&clock CLK_SMMU_MSCL2>, <&clock CLK_MSCL2>;
+ power-domains = <&msc_pd>;
#iommu-cells = <0>;
};
- sysmmu_rotator: sysmmu@0x11D40000 {
+ sysmmu_rotator: sysmmu@11d40000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x11D40000 0x1000>;
interrupt-parent = <&combiner>;
@@ -882,7 +904,7 @@
#iommu-cells = <0>;
};
- sysmmu_jpeg0: sysmmu@0x11F10000 {
+ sysmmu_jpeg0: sysmmu@11f10000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x11F10000 0x1000>;
interrupt-parent = <&combiner>;
@@ -892,7 +914,7 @@
#iommu-cells = <0>;
};
- sysmmu_jpeg1: sysmmu@0x11F20000 {
+ sysmmu_jpeg1: sysmmu@11f20000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x11F20000 0x1000>;
interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
@@ -901,7 +923,7 @@
#iommu-cells = <0>;
};
- sysmmu_mfc_l: sysmmu@0x11200000 {
+ sysmmu_mfc_l: sysmmu@11200000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x11200000 0x1000>;
interrupt-parent = <&combiner>;
@@ -912,7 +934,7 @@
#iommu-cells = <0>;
};
- sysmmu_mfc_r: sysmmu@0x11210000 {
+ sysmmu_mfc_r: sysmmu@11210000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x11210000 0x1000>;
interrupt-parent = <&combiner>;
@@ -923,7 +945,7 @@
#iommu-cells = <0>;
};
- sysmmu_fimd1_0: sysmmu@0x14640000 {
+ sysmmu_fimd1_0: sysmmu@14640000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x14640000 0x1000>;
interrupt-parent = <&combiner>;
@@ -934,7 +956,7 @@
#iommu-cells = <0>;
};
- sysmmu_fimd1_1: sysmmu@0x14680000 {
+ sysmmu_fimd1_1: sysmmu@14680000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x14680000 0x1000>;
interrupt-parent = <&combiner>;
@@ -1531,3 +1553,4 @@
};
#include "exynos5420-pinctrl.dtsi"
+#include "exynos-syscon-restart.dtsi"
diff --git a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
index d31249f25ccf..2f4f40882dab 100644
--- a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
+++ b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
@@ -23,7 +23,7 @@
stdout-path = "serial2:115200n8";
};
- firmware@02073000 {
+ firmware@2073000 {
compatible = "samsung,secure-firmware";
reg = <0x02073000 0x1000>;
};
diff --git a/arch/arm/boot/dts/exynos5440-sd5v1.dts b/arch/arm/boot/dts/exynos5440-sd5v1.dts
deleted file mode 100644
index c4b8392d1ae1..000000000000
--- a/arch/arm/boot/dts/exynos5440-sd5v1.dts
+++ /dev/null
@@ -1,42 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SAMSUNG SD5v1 board device tree source
- *
- * Copyright (c) 2013 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- */
-
-/dts-v1/;
-#include "exynos5440.dtsi"
-
-/ {
- model = "SAMSUNG SD5v1 board based on EXYNOS5440";
- compatible = "samsung,sd5v1", "samsung,exynos5440", "samsung,exynos5";
-
- chosen {
- bootargs = "root=/dev/sda2 rw rootwait ignore_loglevel earlyprintk no_console_suspend mem=2048M@0x80000000 mem=6144M@0x100000000 console=ttySAC0,115200";
- };
-
- /* FIXME: set reg property with correct start address and size */
- memory@0 {
- device_type = "memory";
- reg = <0 0>;
- };
-
- fixed-rate-clocks {
- xtal {
- compatible = "samsung,clock-xtal";
- clock-frequency = <50000000>;
- };
- };
-
- spi {
- status = "disabled";
- };
-
-};
-
-&gmac {
- fixed_phy;
- phy_addr = <1>;
-};
diff --git a/arch/arm/boot/dts/exynos5440-ssdk5440.dts b/arch/arm/boot/dts/exynos5440-ssdk5440.dts
deleted file mode 100644
index a33c4fc29ae5..000000000000
--- a/arch/arm/boot/dts/exynos5440-ssdk5440.dts
+++ /dev/null
@@ -1,81 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SAMSUNG SSDK5440 board device tree source
- *
- * Copyright (c) 2012 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- */
-
-/dts-v1/;
-#include "exynos5440.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
- model = "SAMSUNG SSDK5440 board based on EXYNOS5440";
- compatible = "samsung,ssdk5440", "samsung,exynos5440", "samsung,exynos5";
-
- chosen {
- bootargs = "root=/dev/sda2 rw rootwait ignore_loglevel earlyprintk no_console_suspend mem=2048M@0x80000000 mem=6144M@0x100000000 console=ttySAC0,115200";
- };
-
- /* FIXME: set reg property with correct start address and size */
- memory@0 {
- device_type = "memory";
- reg = <0 0>;
- };
-
- fixed-rate-clocks {
- xtal {
- compatible = "samsung,clock-xtal";
- clock-frequency = <50000000>;
- };
- };
-};
-
-&pcie_0 {
- reset-gpio = <&pin_ctrl 5 GPIO_ACTIVE_HIGH>;
- status = "okay";
-};
-
-&pcie_1 {
- reset-gpio = <&pin_ctrl 22 GPIO_ACTIVE_HIGH>;
- status = "okay";
-};
-
-&spi_0 {
- flash: w25q128@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "winbond,w25q128";
- spi-max-frequency = <15625000>;
- reg = <0>;
- controller-data {
- samsung,spi-feedback-delay = <0>;
- };
-
- partition@0 {
- label = "BootLoader";
- reg = <0x60000 0x80000>;
- read-only;
- };
-
- partition@e0000 {
- label = "Recovery-Kernel";
- reg = <0xe0000 0x300000>;
- read-only;
- };
-
- partition@3e0000 {
- label = "CRAM-FS";
- reg = <0x3e0000 0x700000>;
- read-only;
- };
-
- partition@ae0000 {
- label = "User-Data";
- reg = <0xae0000 0x520000>;
- };
-
- };
-
-};
diff --git a/arch/arm/boot/dts/exynos5440-tmu-sensor-conf.dtsi b/arch/arm/boot/dts/exynos5440-tmu-sensor-conf.dtsi
deleted file mode 100644
index 0421c3d42905..000000000000
--- a/arch/arm/boot/dts/exynos5440-tmu-sensor-conf.dtsi
+++ /dev/null
@@ -1,20 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device tree sources for Exynos5440 TMU sensor configuration
- *
- * Copyright (c) 2014 Lukasz Majewski <l.majewski@samsung.com>
- */
-
-#include <dt-bindings/thermal/thermal_exynos.h>
-
-#thermal-sensor-cells = <0>;
-samsung,tmu_gain = <5>;
-samsung,tmu_reference_voltage = <16>;
-samsung,tmu_noise_cancel_mode = <4>;
-samsung,tmu_efuse_value = <0x5d2d>;
-samsung,tmu_min_efuse_value = <16>;
-samsung,tmu_max_efuse_value = <76>;
-samsung,tmu_first_point_trim = <25>;
-samsung,tmu_second_point_trim = <70>;
-samsung,tmu_default_temp_offset = <25>;
-samsung,tmu_cal_type = <TYPE_ONE_POINT_TRIMMING>;
diff --git a/arch/arm/boot/dts/exynos5440-trip-points.dtsi b/arch/arm/boot/dts/exynos5440-trip-points.dtsi
deleted file mode 100644
index a2b04fed7d0b..000000000000
--- a/arch/arm/boot/dts/exynos5440-trip-points.dtsi
+++ /dev/null
@@ -1,21 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device tree sources for default Exynos5440 thermal zone definition
- *
- * Copyright (c) 2014 Lukasz Majewski <l.majewski@samsung.com>
- */
-
-polling-delay-passive = <0>;
-polling-delay = <0>;
-trips {
- cpu-alert-0 {
- temperature = <100000>; /* millicelsius */
- hysteresis = <0>; /* millicelsius */
- type = "active";
- };
- cpu-crit-0 {
- temperature = <105000>; /* millicelsius */
- hysteresis = <0>; /* millicelsius */
- type = "critical";
- };
-};
diff --git a/arch/arm/boot/dts/exynos5440.dtsi b/arch/arm/boot/dts/exynos5440.dtsi
deleted file mode 100644
index f3abecc44657..000000000000
--- a/arch/arm/boot/dts/exynos5440.dtsi
+++ /dev/null
@@ -1,355 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SAMSUNG EXYNOS5440 SoC device tree source
- *
- * Copyright (c) 2012 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- */
-
-#include <dt-bindings/clock/exynos5440.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
- compatible = "samsung,exynos5440", "samsung,exynos5";
-
- interrupt-parent = <&gic>;
- #address-cells = <1>;
- #size-cells = <1>;
-
- aliases {
- serial0 = &serial_0;
- serial1 = &serial_1;
- spi0 = &spi_0;
- tmuctrl0 = &tmuctrl_0;
- tmuctrl1 = &tmuctrl_1;
- tmuctrl2 = &tmuctrl_2;
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu@0 {
- device_type = "cpu";
- compatible = "arm,cortex-a15";
- reg = <0>;
- };
- cpu@1 {
- device_type = "cpu";
- compatible = "arm,cortex-a15";
- reg = <1>;
- };
- cpu@2 {
- device_type = "cpu";
- compatible = "arm,cortex-a15";
- reg = <2>;
- };
- cpu@3 {
- device_type = "cpu";
- compatible = "arm,cortex-a15";
- reg = <3>;
- };
- };
-
- soc: soc {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- clock: clock-controller@160000 {
- compatible = "samsung,exynos5440-clock";
- reg = <0x160000 0x1000>;
- #clock-cells = <1>;
- };
-
- gic: interrupt-controller@2e0000 {
- compatible = "arm,cortex-a15-gic";
- #interrupt-cells = <3>;
- interrupt-controller;
- reg = <0x2E1000 0x1000>,
- <0x2E2000 0x2000>,
- <0x2E4000 0x2000>,
- <0x2E6000 0x2000>;
- interrupts = <GIC_PPI 9
- (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
- };
-
-
- arm-pmu {
- compatible = "arm,cortex-a15-pmu", "arm,cortex-a9-pmu";
- interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- timer {
- compatible = "arm,cortex-a15-timer",
- "arm,armv7-timer";
- interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
- clock-frequency = <50000000>;
- };
-
- cpufreq@160000 {
- compatible = "samsung,exynos5440-cpufreq";
- reg = <0x160000 0x1000>;
- interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
- operating-points = <
- /* KHz uV */
- 1500000 1100000
- 1400000 1075000
- 1300000 1050000
- 1200000 1025000
- 1100000 1000000
- 1000000 975000
- 900000 950000
- 800000 925000
- >;
- };
-
- serial_0: serial@b0000 {
- compatible = "samsung,exynos4210-uart";
- reg = <0xB0000 0x1000>;
- interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clock CLK_B_125>, <&clock CLK_B_125>;
- clock-names = "uart", "clk_uart_baud0";
- };
-
- serial_1: serial@c0000 {
- compatible = "samsung,exynos4210-uart";
- reg = <0xC0000 0x1000>;
- interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clock CLK_B_125>, <&clock CLK_B_125>;
- clock-names = "uart", "clk_uart_baud0";
- };
-
- spi_0: spi@d0000 {
- compatible = "samsung,exynos5440-spi";
- reg = <0xD0000 0x100>;
- interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- samsung,spi-src-clk = <0>;
- num-cs = <1>;
- clocks = <&clock CLK_B_125>, <&clock CLK_SPI_BAUD>;
- clock-names = "spi", "spi_busclk0";
- };
-
- pin_ctrl: pinctrl@e0000 {
- compatible = "samsung,exynos5440-pinctrl";
- reg = <0xE0000 0x1000>;
- interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-controller;
- #interrupt-cells = <2>;
- #gpio-cells = <2>;
-
- fan: fan {
- samsung,exynos5440-pin-function = <1>;
- };
-
- hdd_led0: hdd_led0 {
- samsung,exynos5440-pin-function = <2>;
- };
-
- hdd_led1: hdd_led1 {
- samsung,exynos5440-pin-function = <3>;
- };
-
- uart1: uart1 {
- samsung,exynos5440-pin-function = <4>;
- };
- };
-
- i2c@f0000 {
- compatible = "samsung,exynos5440-i2c";
- reg = <0xF0000 0x1000>;
- interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- clocks = <&clock CLK_B_125>;
- clock-names = "i2c";
- };
-
- i2c@100000 {
- compatible = "samsung,exynos5440-i2c";
- reg = <0x100000 0x1000>;
- interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- clocks = <&clock CLK_B_125>;
- clock-names = "i2c";
- };
-
- watchdog@110000 {
- compatible = "samsung,s3c6410-wdt";
- reg = <0x110000 0x1000>;
- interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clock CLK_B_125>;
- clock-names = "watchdog";
- };
-
- gmac: ethernet@230000 {
- compatible = "snps,dwmac-3.70a", "snps,dwmac";
- reg = <0x00230000 0x8000>;
- interrupt-parent = <&gic>;
- interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "macirq";
- phy-mode = "sgmii";
- clocks = <&clock CLK_GMAC0>;
- clock-names = "stmmaceth";
- };
-
- amba {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "simple-bus";
- interrupt-parent = <&gic>;
- ranges;
- };
-
- rtc@130000 {
- compatible = "samsung,s3c6410-rtc";
- reg = <0x130000 0x1000>;
- interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clock CLK_B_125>;
- clock-names = "rtc";
- };
-
- tmuctrl_0: tmuctrl@160118 {
- compatible = "samsung,exynos5440-tmu";
- reg = <0x160118 0x230>, <0x160368 0x10>;
- interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clock CLK_B_125>;
- clock-names = "tmu_apbif";
- #include "exynos5440-tmu-sensor-conf.dtsi"
- };
-
- tmuctrl_1: tmuctrl@16011c {
- compatible = "samsung,exynos5440-tmu";
- reg = <0x16011C 0x230>, <0x160368 0x10>;
- interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clock CLK_B_125>;
- clock-names = "tmu_apbif";
- #include "exynos5440-tmu-sensor-conf.dtsi"
- };
-
- tmuctrl_2: tmuctrl@160120 {
- compatible = "samsung,exynos5440-tmu";
- reg = <0x160120 0x230>, <0x160368 0x10>;
- interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clock CLK_B_125>;
- clock-names = "tmu_apbif";
- #include "exynos5440-tmu-sensor-conf.dtsi"
- };
-
- sata@210000 {
- compatible = "snps,exynos5440-ahci";
- reg = <0x210000 0x10000>;
- interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clock CLK_SATA>;
- clock-names = "sata";
- };
-
- ohci@220000 {
- compatible = "samsung,exynos5440-ohci";
- reg = <0x220000 0x1000>;
- interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clock CLK_USB>;
- clock-names = "usbhost";
- };
-
- ehci@221000 {
- compatible = "samsung,exynos5440-ehci";
- reg = <0x221000 0x1000>;
- interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clock CLK_USB>;
- clock-names = "usbhost";
- };
-
- pcie_phy0: pcie-phy@270000 {
- #phy-cells = <0>;
- compatible = "samsung,exynos5440-pcie-phy";
- reg = <0x270000 0x1000>, <0x271000 0x40>;
- };
-
- pcie_phy1: pcie-phy@272000 {
- #phy-cells = <0>;
- compatible = "samsung,exynos5440-pcie-phy";
- reg = <0x272000 0x1000>, <0x271040 0x40>;
- };
-
- pcie_0: pcie@290000 {
- compatible = "samsung,exynos5440-pcie", "snps,dw-pcie";
- reg = <0x290000 0x1000>, <0x40000000 0x1000>;
- reg-names = "elbi", "config";
- interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clock CLK_PR0_250_O>, <&clock CLK_PB0_250_O>;
- clock-names = "pcie", "pcie_bus";
- #address-cells = <3>;
- #size-cells = <2>;
- device_type = "pci";
- phys = <&pcie_phy0>;
- ranges = <0x81000000 0 0 0x40001000 0 0x00010000 /* downstream I/O */
- 0x82000000 0 0x40011000 0x40011000 0 0x1ffef000>; /* non-prefetchable memory */
- bus-range = <0x00 0xff>;
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0x0 0 &gic 53>;
- num-lanes = <4>;
- status = "disabled";
- };
-
- pcie_1: pcie@2a0000 {
- compatible = "samsung,exynos5440-pcie", "snps,dw-pcie";
- reg = <0x2a0000 0x1000>, <0x60000000 0x1000>;
- reg-names = "elbi", "config";
- interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clock CLK_PR1_250_O>, <&clock CLK_PB0_250_O>;
- clock-names = "pcie", "pcie_bus";
- #address-cells = <3>;
- #size-cells = <2>;
- device_type = "pci";
- phys = <&pcie_phy1>;
- ranges = <0x81000000 0 0 0x60001000 0 0x00010000 /* downstream I/O */
- 0x82000000 0 0x60011000 0x60011000 0 0x1ffef000>; /* non-prefetchable memory */
- bus-range = <0x00 0xff>;
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0x0 0 &gic 56>;
- num-lanes = <4>;
- status = "disabled";
- };
- };
-
- thermal-zones {
- cpu0_thermal: cpu0-thermal {
- thermal-sensors = <&tmuctrl_0>;
- #include "exynos5440-trip-points.dtsi"
- };
- cpu1_thermal: cpu1-thermal {
- thermal-sensors = <&tmuctrl_1>;
- #include "exynos5440-trip-points.dtsi"
- };
- cpu2_thermal: cpu2-thermal {
- thermal-sensors = <&tmuctrl_2>;
- #include "exynos5440-trip-points.dtsi"
- };
- };
-};
diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts
index 2f8df9244f72..d80ab9085da1 100644
--- a/arch/arm/boot/dts/exynos5800-peach-pi.dts
+++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts
@@ -27,7 +27,7 @@
aliases {
/* Assign 20 so we don't get confused w/ builtin ones */
- i2c20 = "/spi@12d40000/cros-ec@0/i2c-tunnel";
+ i2c20 = &i2c_tunnel;
};
backlight: backlight {
@@ -939,7 +939,7 @@
samsung,spi-feedback-delay = <1>;
};
- i2c-tunnel {
+ i2c_tunnel: i2c-tunnel {
compatible = "google,cros-ec-i2c-tunnel";
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/gemini-dlink-dir-685.dts b/arch/arm/boot/dts/gemini-dlink-dir-685.dts
index cadde92bc6b5..fb5c954ab95a 100644
--- a/arch/arm/boot/dts/gemini-dlink-dir-685.dts
+++ b/arch/arm/boot/dts/gemini-dlink-dir-685.dts
@@ -13,22 +13,22 @@
#address-cells = <1>;
#size-cells = <1>;
- memory {
+ memory@0 {
/* 128 MB SDRAM in 2 x Hynix HY5DU121622DTP-D43 */
device_type = "memory";
reg = <0x00000000 0x8000000>;
};
chosen {
- stdout-path = "uart0:115200n8";
+ bootargs = "console=ttyS0,19200n8 root=/dev/sda1 rw rootwait";
+ stdout-path = "uart0:19200n8";
};
gpio_keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
+
button-esc {
- debounce_interval = <50>;
+ debounce-interval = <50>;
wakeup-source;
linux,code = <KEY_ESC>;
label = "reset";
@@ -36,7 +36,7 @@
gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
};
button-eject {
- debounce_interval = <50>;
+ debounce-interval = <50>;
wakeup-source;
linux,code = <KEY_EJECTCD>;
label = "unmount";
@@ -98,7 +98,7 @@
/*
* These two LEDs are on the side of the device.
* For electrical reasons, both LEDs cannot be active
- * at the same time so only blue or orange can on at
+ * at the same time so only blue or orange can be on at
* one time. Enabling both makes the LED go dark.
* The LEDs both sit inside the unmount button and the
* label on the case says "unmount".
@@ -108,12 +108,14 @@
/* Collides with LPC_SERIRQ, UART DTR, SSP FSC pins */
gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
default-state = "off";
+ linux,default-trigger = "disk-read";
};
led-orange-hd {
label = "dir685:orange:HD";
/* Collides with LPC_LAD[2], UART DSR, SSP ECLK pins */
gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
default-state = "off";
+ linux,default-trigger = "disk-write";
};
};
diff --git a/arch/arm/boot/dts/gemini-dlink-dns-313.dts b/arch/arm/boot/dts/gemini-dlink-dns-313.dts
index 403364a7aab9..d1329322b968 100644
--- a/arch/arm/boot/dts/gemini-dlink-dns-313.dts
+++ b/arch/arm/boot/dts/gemini-dlink-dns-313.dts
@@ -15,7 +15,7 @@
#address-cells = <1>;
#size-cells = <1>;
- memory {
+ memory@0 {
/* 64 MB SDRAM in a Nanya NT5DS32M16BS-6K package */
device_type = "memory";
reg = <0x00000000 0x4000000>;
@@ -26,15 +26,15 @@
};
chosen {
+ bootargs = "console=ttyS0,19200n8 root=/dev/sda4 rw rootwait";
stdout-path = "uart0:19200n8";
};
gpio_keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
+
button-esc {
- debounce_interval = <50>;
+ debounce-interval = <50>;
wakeup-source;
linux,code = <KEY_ESC>;
label = "reset";
@@ -59,14 +59,13 @@
label = "dns313:green:disk";
gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
default-state = "off";
- linux,default-trigger = "ide-disk";
- /* Ideally should activate while reading */
+ linux,default-trigger = "disk-read";
};
led-disk-red {
label = "dns313:red:disk";
gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
default-state = "off";
- /* Ideally should activate while writing */
+ linux,default-trigger = "disk-write";
};
};
@@ -158,8 +157,12 @@
soc {
flash@30000000 {
+ /*
+ * This is a Eon EN29LV400AB 512 KiB flash with
+ * three partitions.
+ */
+ compatible = "cortina,gemini-flash", "jedec-flash";
status = "okay";
- /* 512KB of flash */
reg = <0x30000000 0x00080000>;
/*
diff --git a/arch/arm/boot/dts/gemini-nas4220b.dts b/arch/arm/boot/dts/gemini-nas4220b.dts
index 4785fbcc41ed..963ea890c87f 100644
--- a/arch/arm/boot/dts/gemini-nas4220b.dts
+++ b/arch/arm/boot/dts/gemini-nas4220b.dts
@@ -14,7 +14,7 @@
#address-cells = <1>;
#size-cells = <1>;
- memory { /* 128 MB */
+ memory@0 { /* 128 MB */
device_type = "memory";
reg = <0x00000000 0x8000000>;
};
@@ -26,19 +26,17 @@
gpio_keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
- button@29 {
- debounce_interval = <50>;
+ button-setup {
+ debounce-interval = <50>;
wakeup-source;
linux,code = <KEY_SETUP>;
label = "Backup button";
/* Conflict with TVC */
gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
};
- button@31 {
- debounce_interval = <50>;
+ button-restart {
+ debounce-interval = <50>;
wakeup-source;
linux,code = <KEY_RESTART>;
label = "Softreset button";
@@ -49,13 +47,13 @@
leds {
compatible = "gpio-leds";
- led@28 {
+ led-orange-hdd {
label = "nas4220b:orange:hdd";
/* Conflict with TVC */
gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
- led@30 {
+ led-green-os {
label = "nas4220b:green:os";
/* Conflict with TVC */
gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
@@ -202,5 +200,9 @@
ata@63000000 {
status = "okay";
};
+
+ ata@63400000 {
+ status = "okay";
+ };
};
};
diff --git a/arch/arm/boot/dts/gemini-rut1xx.dts b/arch/arm/boot/dts/gemini-rut1xx.dts
index 15f20178642c..eb4f0bf074da 100644
--- a/arch/arm/boot/dts/gemini-rut1xx.dts
+++ b/arch/arm/boot/dts/gemini-rut1xx.dts
@@ -14,7 +14,7 @@
#address-cells = <1>;
#size-cells = <1>;
- memory { /* 128 MB */
+ memory@0 { /* 128 MB */
device_type = "memory";
reg = <0x00000000 0x8000000>;
};
@@ -26,11 +26,9 @@
gpio_keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
- button@28 {
- debounce_interval = <50>;
+ button-setup {
+ debounce-interval = <50>;
wakeup-source;
linux,code = <KEY_SETUP>;
label = "Reset to defaults";
@@ -41,14 +39,14 @@
leds {
compatible = "gpio-leds";
- led@7 {
+ led-gsm {
/* FIXME: add the LED color */
label = "rut1xx::gsm";
/* Conflict with ICE */
gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
- led@31 {
+ led-power {
/* FIXME: add the LED color */
label = "rut1xx::power";
/* Conflict with NAND CE0 */
diff --git a/arch/arm/boot/dts/gemini-sq201.dts b/arch/arm/boot/dts/gemini-sq201.dts
index 63c02ca9513c..e5cf9d1a98cd 100644
--- a/arch/arm/boot/dts/gemini-sq201.dts
+++ b/arch/arm/boot/dts/gemini-sq201.dts
@@ -14,7 +14,7 @@
#address-cells = <1>;
#size-cells = <1>;
- memory { /* 128 MB */
+ memory@0 { /* 128 MB */
device_type = "memory";
reg = <0x00000000 0x8000000>;
};
@@ -26,11 +26,9 @@
gpio_keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
- button@18 {
- debounce_interval = <50>;
+ button-setup {
+ debounce-interval = <50>;
wakeup-source;
linux,code = <KEY_SETUP>;
label = "factory reset";
@@ -41,14 +39,14 @@
leds {
compatible = "gpio-leds";
- led@20 {
+ led-green-info {
label = "sq201:green:info";
/* Conflict with parallel flash */
gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
default-state = "on";
linux,default-trigger = "heartbeat";
};
- led@31 {
+ led-green-usb {
label = "sq201:green:usb";
/* Conflict with parallel and NAND flash */
gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/gemini-wbd111.dts b/arch/arm/boot/dts/gemini-wbd111.dts
index b4ec9ad85d72..29af86cd10f7 100644
--- a/arch/arm/boot/dts/gemini-wbd111.dts
+++ b/arch/arm/boot/dts/gemini-wbd111.dts
@@ -14,7 +14,8 @@
#address-cells = <1>;
#size-cells = <1>;
- memory { /* 128 MB */
+ memory@0 {
+ /* 128 MB */
device_type = "memory";
reg = <0x00000000 0x8000000>;
};
@@ -26,11 +27,9 @@
gpio_keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
- button@5 {
- debounce_interval = <50>;
+ button-setup {
+ debounce-interval = <50>;
wakeup-source;
linux,code = <KEY_SETUP>;
label = "reset";
@@ -42,25 +41,25 @@
leds {
compatible = "gpio-leds";
- led@1 {
+ led-red-l3 {
label = "wbd111:red:L3";
/* Conflict with TVC and extended parallel flash */
gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@2 {
+ led-green-l4 {
label = "wbd111:green:L4";
/* Conflict with TVC and extended parallel flash */
gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@3 {
+ led-red-l4 {
label = "wbd111:red:L4";
/* Conflict with TVC and extended parallel flash */
gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@5 {
+ led-greeb-l3 {
label = "wbd111:green:L3";
/* Conflict with TVC and extended parallel flash */
gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/gemini-wbd222.dts b/arch/arm/boot/dts/gemini-wbd222.dts
index 6d25bcc046e7..24e6ae3616f7 100644
--- a/arch/arm/boot/dts/gemini-wbd222.dts
+++ b/arch/arm/boot/dts/gemini-wbd222.dts
@@ -14,7 +14,7 @@
#address-cells = <1>;
#size-cells = <1>;
- memory { /* 128 MB */
+ memory@0 { /* 128 MB */
device_type = "memory";
reg = <0x00000000 0x8000000>;
};
@@ -26,11 +26,9 @@
gpio_keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
- button@5 {
- debounce_interval = <50>;
+ button-setup {
+ debounce-interval = <50>;
wakeup-source;
linux,code = <KEY_SETUP>;
label = "reset";
@@ -42,25 +40,25 @@
leds {
compatible = "gpio-leds";
- led@1 {
+ led-red-l3 {
label = "wbd111:red:L3";
/* Conflict with TVC and extended parallel flash */
gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@2 {
+ led-green-l4 {
label = "wbd111:green:L4";
/* Conflict with TVC and extended parallel flash */
gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@3 {
+ led-red-l4 {
label = "wbd111:red:L4";
/* Conflict with TVC and extended parallel flash */
gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@5 {
+ led-green-l3 {
label = "wbd111:green:L3";
/* Conflict with TVC and extended parallel flash */
gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/gemini.dtsi b/arch/arm/boot/dts/gemini.dtsi
index 0568baca500a..eb752e9495de 100644
--- a/arch/arm/boot/dts/gemini.dtsi
+++ b/arch/arm/boot/dts/gemini.dtsi
@@ -3,8 +3,6 @@
* Device Tree file for Cortina systems Gemini SoC
*/
-/include/ "skeleton.dtsi"
-
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/clock/cortina,gemini-clock.h>
#include <dt-bindings/reset/cortina,gemini-reset.h>
diff --git a/arch/arm/boot/dts/imx1-ads.dts b/arch/arm/boot/dts/imx1-ads.dts
index 6354e4c87313..a1d81badb5c8 100644
--- a/arch/arm/boot/dts/imx1-ads.dts
+++ b/arch/arm/boot/dts/imx1-ads.dts
@@ -23,17 +23,6 @@
memory@8000000 {
reg = <0x08000000 0x04000000>;
};
-
- clocks {
- #address-cells = <1>;
- #size-cells = <0>;
-
- clk32 {
- compatible = "fsl,imx-clk32", "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <32000>;
- };
- };
};
&cspi1 {
diff --git a/arch/arm/boot/dts/imx1.dtsi b/arch/arm/boot/dts/imx1.dtsi
index f7b9edf93f5e..3edc7b5550d8 100644
--- a/arch/arm/boot/dts/imx1.dtsi
+++ b/arch/arm/boot/dts/imx1.dtsi
@@ -1,13 +1,6 @@
-/*
- * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
#include "imx1-pinfunc.h"
@@ -62,6 +55,14 @@
};
};
+ clocks {
+ clk32 {
+ compatible = "fsl,imx-clk32", "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32000>;
+ };
+ };
+
soc {
#address-cells = <1>;
#size-cells = <1>;
diff --git a/arch/arm/boot/dts/imx23-evk.dts b/arch/arm/boot/dts/imx23-evk.dts
index 9d92ece82560..9fb47724b9c1 100644
--- a/arch/arm/boot/dts/imx23-evk.dts
+++ b/arch/arm/boot/dts/imx23-evk.dts
@@ -1,13 +1,6 @@
-/*
- * Copyright 2012 Freescale Semiconductor, Inc.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2012 Freescale Semiconductor, Inc.
/dts-v1/;
#include "imx23.dtsi"
diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi
index cb0a3fe32718..71bfd2b15609 100644
--- a/arch/arm/boot/dts/imx23.dtsi
+++ b/arch/arm/boot/dts/imx23.dtsi
@@ -1,13 +1,6 @@
-/*
- * Copyright 2012 Freescale Semiconductor, Inc.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2012 Freescale Semiconductor, Inc.
#include "imx23-pinfunc.h"
diff --git a/arch/arm/boot/dts/imx25-pdk.dts b/arch/arm/boot/dts/imx25-pdk.dts
index 7f9bd052b84e..a5626b46ac4e 100644
--- a/arch/arm/boot/dts/imx25-pdk.dts
+++ b/arch/arm/boot/dts/imx25-pdk.dts
@@ -1,13 +1,6 @@
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2013 Freescale Semiconductor, Inc.
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
@@ -291,7 +284,6 @@
};
&ssi1 {
- codec-handle = <&codec>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi
index cf70df20b19c..85c15ee63272 100644
--- a/arch/arm/boot/dts/imx25.dtsi
+++ b/arch/arm/boot/dts/imx25.dtsi
@@ -1,13 +1,6 @@
-/*
- * Copyright 2012 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2012 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de>
#include <dt-bindings/gpio/gpio.h>
#include "imx25-pinfunc.h"
@@ -70,9 +63,6 @@
};
clocks {
- #address-cells = <1>;
- #size-cells = <0>;
-
osc {
compatible = "fsl,imx-osc", "fixed-clock";
#clock-cells = <0>;
diff --git a/arch/arm/boot/dts/imx27-apf27.dts b/arch/arm/boot/dts/imx27-apf27.dts
index 66941cdbf244..3eddd805a793 100644
--- a/arch/arm/boot/dts/imx27-apf27.dts
+++ b/arch/arm/boot/dts/imx27-apf27.dts
@@ -22,17 +22,10 @@
memory@a0000000 {
reg = <0xa0000000 0x04000000>;
};
+};
- clocks {
- #address-cells = <1>;
- #size-cells = <0>;
-
- osc26m {
- compatible = "fsl,imx-osc26m", "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <0>;
- };
- };
+&clk_osc26m {
+ clock-frequency = <0>;
};
&iomuxc {
diff --git a/arch/arm/boot/dts/imx27-pdk.dts b/arch/arm/boot/dts/imx27-pdk.dts
index 924b90c9985d..f9a882d99132 100644
--- a/arch/arm/boot/dts/imx27-pdk.dts
+++ b/arch/arm/boot/dts/imx27-pdk.dts
@@ -1,13 +1,6 @@
-/*
- * Copyright 2012 Sascha Hauer, Pengutronix
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2012 Sascha Hauer, Pengutronix
/dts-v1/;
#include "imx27.dtsi"
diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi
index 6585b00c3917..753d88df1627 100644
--- a/arch/arm/boot/dts/imx27.dtsi
+++ b/arch/arm/boot/dts/imx27.dtsi
@@ -1,13 +1,6 @@
-/*
- * Copyright 2012 Sascha Hauer, Pengutronix
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2012 Sascha Hauer, Pengutronix
#include "imx27-pinfunc.h"
@@ -57,10 +50,7 @@
};
clocks {
- #address-cells = <1>;
- #size-cells = <0>;
-
- osc26m {
+ clk_osc26m: osc26m {
compatible = "fsl,imx-osc26m", "fixed-clock";
#clock-cells = <0>;
clock-frequency = <26000000>;
diff --git a/arch/arm/boot/dts/imx28-cfa10049.dts b/arch/arm/boot/dts/imx28-cfa10049.dts
index 60e5c7fd5035..f1c8315b3e01 100644
--- a/arch/arm/boot/dts/imx28-cfa10049.dts
+++ b/arch/arm/boot/dts/imx28-cfa10049.dts
@@ -398,8 +398,6 @@
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&rotary_btn_pins_cfa10049>;
- #address-cells = <1>;
- #size-cells = <0>;
rotary_button {
label = "rotary_button";
diff --git a/arch/arm/boot/dts/imx28-duckbill-2-enocean.dts b/arch/arm/boot/dts/imx28-duckbill-2-enocean.dts
index 7f8d40a9c67e..22215337f72a 100644
--- a/arch/arm/boot/dts/imx28-duckbill-2-enocean.dts
+++ b/arch/arm/boot/dts/imx28-duckbill-2-enocean.dts
@@ -206,8 +206,6 @@
gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&enocean_button>;
diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts
index b0d39654aeb3..6b0ae667640f 100644
--- a/arch/arm/boot/dts/imx28-evk.dts
+++ b/arch/arm/boot/dts/imx28-evk.dts
@@ -1,13 +1,6 @@
-/*
- * Copyright 2012 Freescale Semiconductor, Inc.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2012 Freescale Semiconductor, Inc.
/dts-v1/;
#include "imx28.dtsi"
diff --git a/arch/arm/boot/dts/imx28-tx28.dts b/arch/arm/boot/dts/imx28-tx28.dts
index 687186358c18..b8f46432e2a2 100644
--- a/arch/arm/boot/dts/imx28-tx28.dts
+++ b/arch/arm/boot/dts/imx28-tx28.dts
@@ -140,15 +140,10 @@
regulator-boot-on;
};
- clocks {
- #address-cells = <1>;
- #size-cells = <0>;
- mclk: clock@0 {
- compatible = "fixed-clock";
- reg = <0>;
- #clock-cells = <0>;
- clock-frequency = <26000000>;
- };
+ mclk: clock-mclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <26000000>;
};
sound {
@@ -345,6 +340,7 @@
interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
reset-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
wake-gpios = <&gpio4 9 GPIO_ACTIVE_HIGH>;
+ wakeup-source;
};
touchscreen: tsc2007@48 {
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index 9ad8d3556859..5107fdc482ea 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -1,13 +1,6 @@
-/*
- * Copyright 2012 Freescale Semiconductor, Inc.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2012 Freescale Semiconductor, Inc.
#include <dt-bindings/gpio/gpio.h>
#include "imx28-pinfunc.h"
diff --git a/arch/arm/boot/dts/imx31.dtsi b/arch/arm/boot/dts/imx31.dtsi
index ebc3f2dbb6fd..4642c8169a65 100644
--- a/arch/arm/boot/dts/imx31.dtsi
+++ b/arch/arm/boot/dts/imx31.dtsi
@@ -1,13 +1,6 @@
-/*
- * Copyright 2012 Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2012 Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
/ {
#address-cells = <1>;
diff --git a/arch/arm/boot/dts/imx35-pdk.dts b/arch/arm/boot/dts/imx35-pdk.dts
index 646b1257bba2..df613e88fd2c 100644
--- a/arch/arm/boot/dts/imx35-pdk.dts
+++ b/arch/arm/boot/dts/imx35-pdk.dts
@@ -1,14 +1,7 @@
-/*
- * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
- * Copyright 2014 Freescale Semiconductor, Inc.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+// Copyright 2014 Freescale Semiconductor, Inc.
/dts-v1/;
#include "imx35.dtsi"
diff --git a/arch/arm/boot/dts/imx35.dtsi b/arch/arm/boot/dts/imx35.dtsi
index 54111ed218b1..1c50b785cad4 100644
--- a/arch/arm/boot/dts/imx35.dtsi
+++ b/arch/arm/boot/dts/imx35.dtsi
@@ -1,12 +1,8 @@
-/*
- * Copyright 2012 Steffen Trumtrar, Pengutronix
- *
- * based on imx27.dtsi
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2012 Steffen Trumtrar, Pengutronix
+//
+// based on imx27.dtsi
#include "imx35-pinfunc.h"
diff --git a/arch/arm/boot/dts/imx50-evk.dts b/arch/arm/boot/dts/imx50-evk.dts
index 23f1833e23fa..f0622ec4ba9c 100644
--- a/arch/arm/boot/dts/imx50-evk.dts
+++ b/arch/arm/boot/dts/imx50-evk.dts
@@ -1,15 +1,8 @@
-/*
- * Copyright 2013 Greg Ungerer <gerg@uclinux.org>
- * Copyright 2011 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2013 Greg Ungerer <gerg@uclinux.org>
+// Copyright 2011 Freescale Semiconductor, Inc.
+// Copyright 2011 Linaro Ltd.
/dts-v1/;
#include "imx50.dtsi"
diff --git a/arch/arm/boot/dts/imx50.dtsi b/arch/arm/boot/dts/imx50.dtsi
index 7954e79d0a16..a9b712db9f6c 100644
--- a/arch/arm/boot/dts/imx50.dtsi
+++ b/arch/arm/boot/dts/imx50.dtsi
@@ -60,9 +60,6 @@
};
clocks {
- #address-cells = <1>;
- #size-cells = <0>;
-
ckil {
compatible = "fsl,imx-ckil", "fixed-clock";
#clock-cells = <0>;
diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts
index cf7a1963df25..b8ca73d3d379 100644
--- a/arch/arm/boot/dts/imx51-babbage.dts
+++ b/arch/arm/boot/dts/imx51-babbage.dts
@@ -1,14 +1,7 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2011 Freescale Semiconductor, Inc.
+// Copyright 2011 Linaro Ltd.
/dts-v1/;
#include "imx51.dtsi"
diff --git a/arch/arm/boot/dts/imx51-zii-rdu1.dts b/arch/arm/boot/dts/imx51-zii-rdu1.dts
index 6464f2560e06..df9eca94d812 100644
--- a/arch/arm/boot/dts/imx51-zii-rdu1.dts
+++ b/arch/arm/boot/dts/imx51-zii-rdu1.dts
@@ -207,8 +207,6 @@
switch@0 {
compatible = "marvell,mv88e6085";
- #address-cells = <1>;
- #size-cells = <0>;
reg = <0>;
dsa,member = <0 0>;
@@ -462,7 +460,10 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_esdhc1>;
bus-width = <4>;
+ no-1-8-v;
non-removable;
+ no-sdio;
+ no-sd;
status = "okay";
};
@@ -591,6 +592,7 @@
phy_type = "ulpi";
fsl,usbphy = <&usbh1phy>;
disable-over-current;
+ maximum-speed = "full-speed";
vbus-supply = <&reg_5p0v_main>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi
index 5d390a64e976..fe01b890c715 100644
--- a/arch/arm/boot/dts/imx51.dtsi
+++ b/arch/arm/boot/dts/imx51.dtsi
@@ -1,14 +1,7 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2011 Freescale Semiconductor, Inc.
+// Copyright 2011 Linaro Ltd.
#include "imx51-pinfunc.h"
#include <dt-bindings/clock/imx5-clock.h>
@@ -56,9 +49,6 @@
};
clocks {
- #address-cells = <1>;
- #size-cells = <0>;
-
ckil {
compatible = "fsl,imx-ckil", "fixed-clock";
#clock-cells = <0>;
diff --git a/arch/arm/boot/dts/imx53-ard.dts b/arch/arm/boot/dts/imx53-ard.dts
index 80fc00705d92..117bd002dd1d 100644
--- a/arch/arm/boot/dts/imx53-ard.dts
+++ b/arch/arm/boot/dts/imx53-ard.dts
@@ -11,6 +11,7 @@
*/
/dts-v1/;
+#include <dt-bindings/input/input.h>
#include "imx53.dtsi"
/ {
@@ -68,34 +69,34 @@
home {
label = "Home";
gpios = <&gpio5 10 0>;
- linux,code = <102>; /* KEY_HOME */
+ linux,code = <KEY_HOME>;
wakeup-source;
};
back {
label = "Back";
gpios = <&gpio5 11 0>;
- linux,code = <158>; /* KEY_BACK */
+ linux,code = <KEY_BACK>;
wakeup-source;
};
program {
label = "Program";
gpios = <&gpio5 12 0>;
- linux,code = <362>; /* KEY_PROGRAM */
+ linux,code = <KEY_PROGRAM >;
wakeup-source;
};
volume-up {
label = "Volume Up";
gpios = <&gpio5 13 0>;
- linux,code = <115>; /* KEY_VOLUMEUP */
+ linux,code = <KEY_VOLUMEUP>;
};
volume-down {
label = "Volume Down";
gpios = <&gpio4 0 0>;
- linux,code = <114>; /* KEY_VOLUMEDOWN */
+ linux,code = <KEY_VOLUMEDOWN>;
};
};
};
diff --git a/arch/arm/boot/dts/imx53-m53.dtsi b/arch/arm/boot/dts/imx53-m53.dtsi
index 3da6dd5edb79..ce45f08e3051 100644
--- a/arch/arm/boot/dts/imx53-m53.dtsi
+++ b/arch/arm/boot/dts/imx53-m53.dtsi
@@ -53,8 +53,6 @@
stmpe610@41 {
compatible = "st,stmpe610";
- #address-cells = <1>;
- #size-cells = <0>;
reg = <0x41>;
id = <0>;
blocks = <0x5>;
diff --git a/arch/arm/boot/dts/imx53-ppd.dts b/arch/arm/boot/dts/imx53-ppd.dts
index d5628af2e301..3aa6f693fa9f 100644
--- a/arch/arm/boot/dts/imx53-ppd.dts
+++ b/arch/arm/boot/dts/imx53-ppd.dts
@@ -180,8 +180,6 @@
power-gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
power-button {
label = "Power button";
@@ -192,8 +190,6 @@
touch-lock-key {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
touch-lock-button {
label = "Touch lock button";
@@ -300,7 +296,7 @@
compatible = "dlg,da9053-aa";
reg = <0>;
interrupt-parent = <&gpio3>;
- interrupts = <12 0x8>;
+ interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
spi-max-frequency = <1000000>;
dlg,tsi-as-adc;
tsiref-supply = <&reg_tsiref>;
@@ -473,7 +469,7 @@
compatible = "fsl,mma8453";
reg = <0x1c>;
interrupt-parent = <&gpio1>;
- interrupts = <6 0>;
+ interrupts = <6 IRQ_TYPE_NONE>;
interrupt-names = "INT1";
};
@@ -539,7 +535,7 @@
reset-gpio = <&gpio5 19 GPIO_ACTIVE_HIGH>;
reg = <0x4b>;
interrupt-parent = <&gpio5>;
- interrupts = <4 0x8>;
+ interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
};
};
@@ -559,8 +555,6 @@
status = "okay";
port@2 {
- reg = <2>;
-
lvds0_out: endpoint {
remote-endpoint = <&panel_in_lvds0>;
};
diff --git a/arch/arm/boot/dts/imx53-qsb-common.dtsi b/arch/arm/boot/dts/imx53-qsb-common.dtsi
index 485a69d45e1c..ef7658a78836 100644
--- a/arch/arm/boot/dts/imx53-qsb-common.dtsi
+++ b/arch/arm/boot/dts/imx53-qsb-common.dtsi
@@ -1,14 +1,7 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2011 Freescale Semiconductor, Inc.
+// Copyright 2011 Linaro Ltd.
#include "imx53.dtsi"
diff --git a/arch/arm/boot/dts/imx53-qsb.dts b/arch/arm/boot/dts/imx53-qsb.dts
index d3d662e37677..6831836bd726 100644
--- a/arch/arm/boot/dts/imx53-qsb.dts
+++ b/arch/arm/boot/dts/imx53-qsb.dts
@@ -1,14 +1,7 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2011 Freescale Semiconductor, Inc.
+// Copyright 2011 Linaro Ltd.
/dts-v1/;
#include "imx53-qsb-common.dtsi"
@@ -23,7 +16,7 @@
compatible = "dlg,da9053-aa", "dlg,da9052";
reg = <0x48>;
interrupt-parent = <&gpio7>;
- interrupts = <11 0x8>; /* low-level active IRQ at GPIO7_11 */
+ interrupts = <11 IRQ_TYPE_LEVEL_LOW>; /* low-level active IRQ at GPIO7_11 */
regulators {
buck1_reg: buck1 {
diff --git a/arch/arm/boot/dts/imx53-qsrb.dts b/arch/arm/boot/dts/imx53-qsrb.dts
index 4e103a905dc9..1bbf24ad308a 100644
--- a/arch/arm/boot/dts/imx53-qsrb.dts
+++ b/arch/arm/boot/dts/imx53-qsrb.dts
@@ -1,14 +1,7 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2011 Freescale Semiconductor, Inc.
+// Copyright 2011 Linaro Ltd.
/dts-v1/;
diff --git a/arch/arm/boot/dts/imx53-smd.dts b/arch/arm/boot/dts/imx53-smd.dts
index fd030128666c..462071c9ddd7 100644
--- a/arch/arm/boot/dts/imx53-smd.dts
+++ b/arch/arm/boot/dts/imx53-smd.dts
@@ -1,16 +1,10 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2011 Freescale Semiconductor, Inc.
+// Copyright 2011 Linaro Ltd.
/dts-v1/;
+#include <dt-bindings/input/input.h>
#include "imx53.dtsi"
/ {
@@ -27,13 +21,13 @@
volume-up {
label = "Volume Up";
gpios = <&gpio2 14 0>;
- linux,code = <115>; /* KEY_VOLUMEUP */
+ linux,code = <KEY_VOLUMEUP>;
};
volume-down {
label = "Volume Down";
gpios = <&gpio2 15 0>;
- linux,code = <114>; /* KEY_VOLUMEDOWN */
+ linux,code = <KEY_VOLUMEDOWN>;
};
};
};
diff --git a/arch/arm/boot/dts/imx53-tx53-x03x.dts b/arch/arm/boot/dts/imx53-tx53-x03x.dts
index af8ec5e4417b..a7f77527269d 100644
--- a/arch/arm/boot/dts/imx53-tx53-x03x.dts
+++ b/arch/arm/boot/dts/imx53-tx53-x03x.dts
@@ -245,6 +245,7 @@
interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
wake-gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
+ wakeup-source;
};
touchscreen: tsc2007@48 {
diff --git a/arch/arm/boot/dts/imx53-tx53.dtsi b/arch/arm/boot/dts/imx53-tx53.dtsi
index 69a2af7d6c11..54cf3e67069a 100644
--- a/arch/arm/boot/dts/imx53-tx53.dtsi
+++ b/arch/arm/boot/dts/imx53-tx53.dtsi
@@ -58,7 +58,7 @@
can0 = &can2; /* Make the can interface indices consistent with TX28/TX48 modules */
can1 = &can1;
ipu = &ipu;
- reg_can_xcvr = &reg_can_xcvr;
+ reg-can-xcvr = &reg_can_xcvr;
usbh1 = &usbh1;
usbotg = &usbotg;
};
@@ -67,13 +67,12 @@
ckih1 {
clock-frequency = <0>;
};
+ };
- mclk: clock@0 {
- compatible = "fixed-clock";
- reg = <0>;
- #clock-cells = <0>;
- clock-frequency = <26000000>;
- };
+ mclk: clock-mclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <26000000>;
};
gpio-keys {
@@ -550,7 +549,6 @@
};
&ssi1 {
- codec-handle = <&sgtl5000>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi b/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi
index df8dafe2564d..f83a8c62ea53 100644
--- a/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi
+++ b/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi
@@ -150,7 +150,7 @@
compatible = "dlg,da9053-aa", "dlg,da9052";
reg = <0x48>;
interrupt-parent = <&gpio7>;
- interrupts = <11 0x8>; /* low-level active IRQ at GPIO7_11 */
+ interrupts = <11 IRQ_TYPE_LEVEL_LOW>; /* low-level active IRQ at GPIO7_11 */
regulators {
buck1_reg: buck1 {
diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi
index 3d65c0192f69..1a7a7bb3df45 100644
--- a/arch/arm/boot/dts/imx53.dtsi
+++ b/arch/arm/boot/dts/imx53.dtsi
@@ -88,9 +88,6 @@
};
clocks {
- #address-cells = <1>;
- #size-cells = <0>;
-
ckil {
compatible = "fsl,imx-ckil", "fixed-clock";
#clock-cells = <0>;
@@ -488,6 +485,10 @@
remote-endpoint = <&ipu_di0_lvds0>;
};
};
+
+ port@2 {
+ reg = <2>;
+ };
};
lvds-channel@1 {
@@ -503,6 +504,10 @@
remote-endpoint = <&ipu_di1_lvds1>;
};
};
+
+ port@2 {
+ reg = <2>;
+ };
};
};
diff --git a/arch/arm/boot/dts/imx6dl-aristainetos2_4.dts b/arch/arm/boot/dts/imx6dl-aristainetos2_4.dts
index 7128c76d5721..29940ba215a8 100644
--- a/arch/arm/boot/dts/imx6dl-aristainetos2_4.dts
+++ b/arch/arm/boot/dts/imx6dl-aristainetos2_4.dts
@@ -78,8 +78,6 @@
&ecspi1 {
lcd_panel: display@0 {
- #address-cells = <1>;
- #size-cells = <1>;
compatible = "lg,lg4573";
spi-max-frequency = <10000000>;
reg = <0>;
diff --git a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts
index ea184d108491..3dee3af1a4c1 100644
--- a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts
+++ b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts
@@ -72,15 +72,12 @@
stdout-path = "serial0:115200n8";
};
- clocks {
- /* Fixed crystal dedicated to mcp251x */
- clk16m: clk@1 {
- compatible = "fixed-clock";
- reg = <1>;
- #clock-cells = <0>;
- clock-frequency = <16000000>;
- clock-output-names = "clk16m";
- };
+ /* Fixed crystal dedicated to mcp251x */
+ clk16m: clock-16m {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <16000000>;
+ clock-output-names = "clk16m";
};
gpio-keys {
diff --git a/arch/arm/boot/dts/imx6dl-mamoj.dts b/arch/arm/boot/dts/imx6dl-mamoj.dts
new file mode 100644
index 000000000000..6b2d29138bed
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-mamoj.dts
@@ -0,0 +1,224 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2018 BTicino
+ * Copyright (C) 2018 Amarula Solutions B.V.
+ */
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+
+/ {
+ model = "BTicino i.MX6DL Mamoj board";
+ compatible = "bticino,imx6dl-mamoj", "fsl,imx6dl";
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet>;
+ phy-mode = "mii";
+ status = "okay";
+};
+
+&i2c3 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+};
+
+&i2c4 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c4>;
+ status = "okay";
+
+ pfuze100: pmic@8 {
+ compatible = "fsl,pfuze100";
+ reg = <0x08>;
+
+ regulators {
+ /* CPU vdd_arm core */
+ sw1a_reg: sw1ab {
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1875000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ /* SOC vdd_soc */
+ sw1c_reg: sw1c {
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1875000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ /* I/O power GEN_3V3 */
+ sw2_reg: sw2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* DDR memory */
+ sw3a_reg: sw3a {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1975000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* DDR memory */
+ sw3b_reg: sw3b {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1975000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* not used */
+ sw4_reg: sw4 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ /* not used */
+ swbst_reg: swbst {
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5150000>;
+ };
+
+ /* PMIC vsnvs. EX boot mode */
+ snvs_reg: vsnvs {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vref_reg: vrefddr {
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* not used */
+ vgen1_reg: vgen1 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ };
+
+ /* not used */
+ vgen2_reg: vgen2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ };
+
+ /* not used */
+ vgen3_reg: vgen3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ /* 1v8 general power */
+ vgen4_reg: vgen4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ /* 2v8 general power IMX6 */
+ vgen5_reg: vgen5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ /* 3v3 Ethernet */
+ vgen6_reg: vgen6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+ };
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ status = "okay";
+};
+
+&usdhc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ bus-width = <8>;
+ non-removable;
+ keep-power-in-suspend;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_enet: enetgrp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b1
+ MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0
+ MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0
+ MX6QDL_PAD_KEY_ROW2__ENET_TX_DATA2 0x1b0b0
+ MX6QDL_PAD_KEY_ROW0__ENET_TX_DATA3 0x1b0b0
+ MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0
+ MX6QDL_PAD_GPIO_19__ENET_TX_ER 0x1b0b0
+ MX6QDL_PAD_GPIO_18__ENET_RX_CLK 0x1b0b1
+ MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0
+ MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0
+ MX6QDL_PAD_KEY_COL2__ENET_RX_DATA2 0x1b0b0
+ MX6QDL_PAD_KEY_COL0__ENET_RX_DATA3 0x1b0b0
+ MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0
+ MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1b0b0
+ MX6QDL_PAD_KEY_COL3__ENET_CRS 0x1b0b0
+ MX6QDL_PAD_KEY_ROW1__ENET_COL 0x1b0b0
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
+ MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c4: i2c4grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_7__I2C4_SCL 0x4001b8b1
+ MX6QDL_PAD_GPIO_8__I2C4_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+ MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059
+ MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059
+ MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059
+ MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
+ >;
+ };
+};
diff --git a/arch/arm/boot/dts/imx6dl-sabreauto.dts b/arch/arm/boot/dts/imx6dl-sabreauto.dts
index a6ce7b487ad7..660d52a245ba 100644
--- a/arch/arm/boot/dts/imx6dl-sabreauto.dts
+++ b/arch/arm/boot/dts/imx6dl-sabreauto.dts
@@ -1,10 +1,6 @@
-/*
- * Copyright (C) 2013 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2013 Freescale Semiconductor, Inc.
/dts-v1/;
diff --git a/arch/arm/boot/dts/imx6dl-sabresd.dts b/arch/arm/boot/dts/imx6dl-sabresd.dts
index 9607afe088fc..cd6bbf22a16f 100644
--- a/arch/arm/boot/dts/imx6dl-sabresd.dts
+++ b/arch/arm/boot/dts/imx6dl-sabresd.dts
@@ -1,10 +1,6 @@
-/*
- * Copyright (C) 2013 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2013 Freescale Semiconductor, Inc.
/dts-v1/;
diff --git a/arch/arm/boot/dts/imx6dl-udoo.dts b/arch/arm/boot/dts/imx6dl-udoo.dts
index e3713f00e819..d871cac1711f 100644
--- a/arch/arm/boot/dts/imx6dl-udoo.dts
+++ b/arch/arm/boot/dts/imx6dl-udoo.dts
@@ -1,12 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Copyright 2013 Freescale Semiconductor, Inc.
*
* Author: Fabio Estevam <fabio.estevam@freescale.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
*/
/dts-v1/;
#include "imx6dl.dtsi"
diff --git a/arch/arm/boot/dts/imx6dl-wandboard-revb1.dts b/arch/arm/boot/dts/imx6dl-wandboard-revb1.dts
index 5727fa48cfd5..738db4fc7702 100644
--- a/arch/arm/boot/dts/imx6dl-wandboard-revb1.dts
+++ b/arch/arm/boot/dts/imx6dl-wandboard-revb1.dts
@@ -1,12 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Copyright 2013 Freescale Semiconductor, Inc.
*
* Author: Fabio Estevam <fabio.estevam@freescale.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
*/
/dts-v1/;
#include "imx6dl.dtsi"
diff --git a/arch/arm/boot/dts/imx6dl-wandboard-revd1.dts b/arch/arm/boot/dts/imx6dl-wandboard-revd1.dts
index a72c07db7dda..51de6b4bd7d8 100644
--- a/arch/arm/boot/dts/imx6dl-wandboard-revd1.dts
+++ b/arch/arm/boot/dts/imx6dl-wandboard-revd1.dts
@@ -1,12 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Copyright 2013 Freescale Semiconductor, Inc.
*
* Author: Fabio Estevam <fabio.estevam@freescale.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
*/
/dts-v1/;
#include "imx6dl.dtsi"
diff --git a/arch/arm/boot/dts/imx6dl-wandboard.dts b/arch/arm/boot/dts/imx6dl-wandboard.dts
index a09f274cd1f4..b43454deaa1a 100644
--- a/arch/arm/boot/dts/imx6dl-wandboard.dts
+++ b/arch/arm/boot/dts/imx6dl-wandboard.dts
@@ -1,12 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Copyright 2013 Freescale Semiconductor, Inc.
*
* Author: Fabio Estevam <fabio.estevam@freescale.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
*/
/dts-v1/;
#include "imx6dl.dtsi"
diff --git a/arch/arm/boot/dts/imx6dl.dtsi b/arch/arm/boot/dts/imx6dl.dtsi
index 558bce81209d..b384913c34dd 100644
--- a/arch/arm/boot/dts/imx6dl.dtsi
+++ b/arch/arm/boot/dts/imx6dl.dtsi
@@ -1,12 +1,6 @@
-
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2013 Freescale Semiconductor, Inc.
#include <dt-bindings/interrupt-controller/irq.h>
#include "imx6dl-pinfunc.h"
diff --git a/arch/arm/boot/dts/imx6q-b850v3.dts b/arch/arm/boot/dts/imx6q-b850v3.dts
index 35edbdc7bcd1..044a5bebe1c5 100644
--- a/arch/arm/boot/dts/imx6q-b850v3.dts
+++ b/arch/arm/boot/dts/imx6q-b850v3.dts
@@ -156,8 +156,6 @@
stdp2690@72 {
compatible = "megachips,stdp2690-ge-b850v3-fw";
- #address-cells = <1>;
- #size-cells = <0>;
reg = <0x72>;
ports {
@@ -184,8 +182,6 @@
stdp4028@73 {
compatible = "megachips,stdp4028-ge-b850v3-fw";
- #address-cells = <1>;
- #size-cells = <0>;
reg = <0x73>;
interrupt-parent = <&gpio2>;
interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/imx6q-ba16.dtsi b/arch/arm/boot/dts/imx6q-ba16.dtsi
index bf4bdb385de9..e903c488287b 100644
--- a/arch/arm/boot/dts/imx6q-ba16.dtsi
+++ b/arch/arm/boot/dts/imx6q-ba16.dtsi
@@ -157,7 +157,12 @@
partition@d0000 {
label = "spare";
- reg = <0xd0000 0x130000>;
+ reg = <0xd0000 0x320000>;
+ };
+
+ partition@3f0000 {
+ label = "mfg";
+ reg = <0x3f0000 0x10000>;
};
};
};
diff --git a/arch/arm/boot/dts/imx6q-bx50v3.dtsi b/arch/arm/boot/dts/imx6q-bx50v3.dtsi
index 990e411cbca0..d3cba09be0cb 100644
--- a/arch/arm/boot/dts/imx6q-bx50v3.dtsi
+++ b/arch/arm/boot/dts/imx6q-bx50v3.dtsi
@@ -43,13 +43,10 @@
#include "imx6q-ba16.dtsi"
/ {
- clocks {
- mclk: clock@0 {
- compatible = "fixed-clock";
- reg = <0>;
- #clock-cells = <0>;
- clock-frequency = <22000000>;
- };
+ mclk: clock-mclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <22000000>;
};
gpio-poweroff {
@@ -107,8 +104,6 @@
switch@0 {
compatible = "marvell,mv88e6085"; /* 88e6240*/
- #address-cells = <1>;
- #size-cells = <0>;
reg = <0>;
switch_ports: ports {
diff --git a/arch/arm/boot/dts/imx6q-dhcom-pdk2.dts b/arch/arm/boot/dts/imx6q-dhcom-pdk2.dts
new file mode 100644
index 000000000000..9c61e3be2d9a
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-dhcom-pdk2.dts
@@ -0,0 +1,151 @@
+// SPDX-License-Identifier: (GPL-2.0+)
+/*
+ * Copyright (C) 2015 DH electronics GmbH
+ * Copyright (C) 2018 Marek Vasut <marex@denx.de>
+ */
+
+/dts-v1/;
+
+#include "imx6q-dhcom-som.dtsi"
+
+/ {
+ model = "Freescale i.MX6 Quad DHCOM Premium Developer Kit (2)";
+ compatible = "dh,imx6q-dhcom-pdk2", "dh,imx6q-dhcom-som", "fsl,imx6q";
+
+ chosen {
+ stdout-path = &uart1;
+ };
+
+ clk_ext_audio_codec: clock-codec {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24000000>;
+ };
+
+ sound {
+ compatible = "fsl,imx-audio-sgtl5000";
+ model = "imx-sgtl5000";
+ ssi-controller = <&ssi1>;
+ audio-codec = <&sgtl5000>;
+ audio-routing =
+ "MIC_IN", "Mic Jack",
+ "Mic Jack", "Mic Bias",
+ "LINE_IN", "Line In Jack",
+ "Headphone Jack", "HP_OUT";
+ mux-int-port = <1>;
+ mux-ext-port = <3>;
+ };
+};
+
+&audmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux_ext>;
+ status = "okay";
+};
+
+&hdmi {
+ ddc-i2c-bus = <&i2c2>;
+ status = "okay";
+};
+
+&i2c2 {
+ sgtl5000: codec@a {
+ compatible = "fsl,sgtl5000";
+ reg = <0x0a>;
+ #sound-dai-cells = <0>;
+ clocks = <&clk_ext_audio_codec>;
+ VDDA-supply = <&reg_3p3v>;
+ VDDIO-supply = <&reg_3p3v>;
+ };
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog_base &pinctrl_hog>;
+
+ pinctrl_hog: hog-grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x400120b0
+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x400120b0
+ MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x400120b0
+ MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03 0x400120b0
+ MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x120b0
+ MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x400120b0
+ MX6QDL_PAD_EIM_D27__GPIO3_IO27 0x120b0
+ MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x120b0
+ MX6QDL_PAD_KEY_COL1__GPIO4_IO08 0x400120b0
+ MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x400120b0
+ MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x400120b0
+ MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x400120b0
+ MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x400120b0
+ MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x400120b0
+ MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x400120b0
+ MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x400120b0
+ MX6QDL_PAD_SD1_CMD__GPIO1_IO18 0x400120b0
+ MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x400120b0
+ MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x400120b0
+ MX6QDL_PAD_SD1_DAT2__GPIO1_IO19 0x400120b0
+ MX6QDL_PAD_SD1_CLK__GPIO1_IO20 0x400120b0
+ MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x400120b0
+ MX6QDL_PAD_CSI0_MCLK__GPIO5_IO19 0x400120b0
+ MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x400120b0
+ >;
+ };
+
+ pinctrl_audmux_ext: audmux-ext-grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0
+ MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0
+ MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0
+ MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0
+ >;
+ };
+
+ pinctrl_enet_1G: enet-1G-grp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x100b0
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x100b0
+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x100b0
+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x100b0
+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x100b0
+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x100b0
+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x100b0
+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x100b0
+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x100b0
+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
+ MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x000b0
+ MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x000b1
+ MX6QDL_PAD_EIM_D26__GPIO3_IO26 0x000b1
+ >;
+ };
+
+ pinctrl_pcie: pcie-grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x1b0b1
+ >;
+ };
+};
+
+&pcie {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pcie>;
+ reset-gpio = <&gpio6 14 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&ssi1 {
+ status = "okay";
+};
+
+&sata {
+ status = "okay";
+};
+
+&usdhc3 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-dhcom-som.dtsi b/arch/arm/boot/dts/imx6q-dhcom-som.dtsi
new file mode 100644
index 000000000000..bbba0671f0f4
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-dhcom-som.dtsi
@@ -0,0 +1,476 @@
+// SPDX-License-Identifier: (GPL-2.0+)
+/*
+ * Copyright (C) 2015 DH electronics GmbH
+ * Copyright (C) 2018 Marek Vasut <marex@denx.de>
+ */
+
+#include "imx6q.dtsi"
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/imx6qdl-clock.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ aliases {
+ mmc0 = &usdhc2;
+ mmc1 = &usdhc3;
+ mmc2 = &usdhc4;
+ mmc3 = &usdhc1;
+ };
+
+ memory@10000000 {
+ reg = <0x10000000 0x40000000>;
+ };
+
+ reg_usb_otg_vbus: regulator-usb-otg-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_otg_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ reg_usb_h1_vbus: regulator-usb-h1-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_h1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_3p3v: regulator-3P3V {
+ compatible = "regulator-fixed";
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+};
+
+&can1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan1>;
+ status = "okay";
+};
+
+&can2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan2>;
+ status = "okay";
+};
+
+&ecspi1 {
+ cs-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>, <&gpio4 11 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi1>;
+ status = "okay";
+
+ flash@0 { /* S25FL116K */
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <50000000>;
+ reg = <0>;
+ m25p,fast-read;
+ };
+};
+
+&ecspi2 {
+ cs-gpios = <&gpio5 29 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi2>;
+ status = "okay";
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet_100M>;
+ phy-mode = "rmii";
+ phy-handle = <&ethphy0>;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy0: ethernet-phy@0 { /* SMSC LAN8710Ai */
+ reg = <0>;
+ max-speed = <100>;
+ reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+ reset-delay-us = <1000>;
+ reset-post-delay-us = <1000>;
+ };
+ };
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+};
+
+&i2c2 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+};
+
+&i2c3 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+
+ ltc3676: pmic@3c {
+ compatible = "lltc,ltc3676";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pmic_hw300>;
+ reg = <0x3c>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+
+ regulators {
+ sw1_reg: sw1 {
+ regulator-min-microvolt = <787500>;
+ regulator-max-microvolt = <1527272>;
+ lltc,fb-voltage-divider = <100000 110000>;
+ regulator-suspend-mem-microvolt = <1040000>;
+ regulator-ramp-delay = <7000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw2_reg: sw2 {
+ regulator-min-microvolt = <1885714>;
+ regulator-max-microvolt = <3657142>;
+ lltc,fb-voltage-divider = <100000 28000>;
+ regulator-ramp-delay = <7000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3_reg: sw3 {
+ regulator-min-microvolt = <787500>;
+ regulator-max-microvolt = <1527272>;
+ lltc,fb-voltage-divider = <100000 110000>;
+ regulator-suspend-mem-microvolt = <980000>;
+ regulator-ramp-delay = <7000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw4_reg: sw4 {
+ regulator-min-microvolt = <855571>;
+ regulator-max-microvolt = <1659291>;
+ lltc,fb-voltage-divider = <100000 93100>;
+ regulator-ramp-delay = <7000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo1_reg: ldo1 {
+ regulator-min-microvolt = <3240306>;
+ regulator-max-microvolt = <3240306>;
+ lltc,fb-voltage-divider = <102000 29400>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo2_reg: ldo2 {
+ regulator-min-microvolt = <2484708>;
+ regulator-max-microvolt = <2484708>;
+ lltc,fb-voltage-divider = <100000 41200>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
+
+ touchscreen@49 { /* TSC2004 */
+ compatible = "ti,tsc2004";
+ reg = <0x49>;
+ vio-supply = <&reg_3p3v>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_tsc2004_hw300>;
+ interrupts-extended = <&gpio4 14 IRQ_TYPE_EDGE_FALLING>;
+ status = "disabled";
+ };
+
+ eeprom@50 {
+ compatible = "atmel,24c02";
+ reg = <0x50>;
+ pagesize = <16>;
+ };
+
+ rtc@56 {
+ compatible = "rv3029c2";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rtc_hw300>;
+ reg = <0x56>;
+ interrupt-parent = <&gpio7>;
+ interrupts = <12 2>;
+ };
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog_base>;
+
+ pinctrl_hog_base: hog-base-grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x120b0
+ MX6QDL_PAD_EIM_A23__GPIO6_IO06 0x120b0
+ MX6QDL_PAD_EIM_A22__GPIO2_IO16 0x120b0
+ MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x120b0
+ MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x120b0
+ >;
+ };
+
+ pinctrl_ecspi1: ecspi1-grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
+ MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
+ MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
+ MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x1b0b0
+ MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x1b0b0
+ >;
+ };
+
+ pinctrl_ecspi2: ecspi2-grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT10__ECSPI2_MISO 0x100b1
+ MX6QDL_PAD_CSI0_DAT9__ECSPI2_MOSI 0x100b1
+ MX6QDL_PAD_CSI0_DAT8__ECSPI2_SCLK 0x100b1
+ MX6QDL_PAD_CSI0_DAT11__GPIO5_IO29 0x1b0b0
+ >;
+ };
+
+ pinctrl_enet_100M: enet-100M-grp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
+ MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0
+ MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1b0b0
+ MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0
+ MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0
+ MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0
+ MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0
+ MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0
+ MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
+ MX6QDL_PAD_EIM_WAIT__GPIO5_IO00 0x000b0
+ MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x000b1
+ MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x120b0
+ >;
+ };
+
+ pinctrl_flexcan1: flexcan1-grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b0
+ MX6QDL_PAD_GPIO_8__FLEXCAN1_RX 0x1b0b0
+ >;
+ };
+
+ pinctrl_flexcan2: flexcan2-grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_DAT0__FLEXCAN2_TX 0x1b0b0
+ MX6QDL_PAD_SD3_DAT1__FLEXCAN2_RX 0x1b0b0
+ >;
+ };
+
+ pinctrl_i2c1: i2c1-grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
+ MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c2: i2c2-grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c3: i2c3-grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
+ MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_pmic_hw300: pmic-hw300-grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x1B0B0
+ >;
+ };
+
+ pinctrl_rtc_hw300: rtc-hw300-grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x120B0
+ >;
+ };
+
+ pinctrl_tsc2004_hw300: tsc2004-hw300-grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x120B0
+ >;
+ };
+
+ pinctrl_uart1: uart1-grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
+ MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D20__UART1_RTS_B 0x1b0b1
+ MX6QDL_PAD_EIM_D19__UART1_CTS_B 0x4001b0b1
+ MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x4001b0b1
+ MX6QDL_PAD_EIM_D24__GPIO3_IO24 0x4001b0b1
+ MX6QDL_PAD_EIM_D25__GPIO3_IO25 0x4001b0b1
+ MX6QDL_PAD_EIM_EB3__GPIO2_IO31 0x4001b0b1
+ >;
+ };
+
+ pinctrl_uart4: uart4-grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1
+ MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart5: uart5-grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA 0x1b0b1
+ MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA 0x1b0b1
+ MX6QDL_PAD_CSI0_DAT18__UART5_RTS_B 0x1b0b1
+ MX6QDL_PAD_CSI0_DAT19__UART5_CTS_B 0x4001b0b1
+ >;
+ };
+
+ pinctrl_usbh1: usbh1-grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x120B0
+ >;
+ };
+
+ pinctrl_usbotg: usbotg-grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2-grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059
+ MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059
+ MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
+ MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
+ MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
+ MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
+ MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x120B0
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3-grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+ MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x120B0
+ >;
+ };
+
+ pinctrl_usdhc4: usdhc4-grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059
+ MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059
+ MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059
+ MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059
+ MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059
+ MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059
+ MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059
+ MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059
+ MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059
+ MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059
+ >;
+ };
+};
+
+&reg_arm {
+ vin-supply = <&sw3_reg>;
+};
+
+&reg_soc {
+ vin-supply = <&sw1_reg>;
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ uart-has-rtscts;
+ dtr-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
+ dsr-gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
+ dcd-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
+ rng-gpios = <&gpio2 31 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart4>;
+ status = "okay";
+};
+
+&uart5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart5>;
+ uart-has-rtscts;
+ status = "okay";
+};
+
+&usbh1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbh1>;
+ vbus-supply = <&reg_usb_h1_vbus>;
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usbotg {
+ vbus-supply = <&reg_usb_otg_vbus>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg>;
+ disable-over-current;
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&usdhc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ cd-gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>;
+ keep-power-in-suspend;
+ status = "okay";
+};
+
+&usdhc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ cd-gpios = <&gpio7 8 GPIO_ACTIVE_LOW>;
+ fsl,wp-controller;
+ keep-power-in-suspend;
+ status = "disabled";
+};
+
+&usdhc4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc4>;
+ non-removable;
+ bus-width = <8>;
+ no-1-8-v;
+ keep-power-in-suspend;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-gk802.dts b/arch/arm/boot/dts/imx6q-gk802.dts
index 0be375611382..84d3540b3a97 100644
--- a/arch/arm/boot/dts/imx6q-gk802.dts
+++ b/arch/arm/boot/dts/imx6q-gk802.dts
@@ -8,6 +8,7 @@
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
#include "imx6q.dtsi"
/ {
@@ -43,7 +44,7 @@
recovery-button {
label = "recovery";
gpios = <&gpio3 16 1>;
- linux,code = <0x198>; /* KEY_RESTART */
+ linux,code = <KEY_RESTART>;
wakeup-source;
};
};
diff --git a/arch/arm/boot/dts/imx6q-icore-mipi.dts b/arch/arm/boot/dts/imx6q-icore-mipi.dts
new file mode 100644
index 000000000000..acd3d33476d4
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-icore-mipi.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2017 Engicam S.r.l.
+ * Copyright (C) 2017 Amarula Solutions B.V.
+ * Author: Jagan Teki <jagan@amarulasolutions.com>
+ */
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-icore.dtsi"
+
+/ {
+ model = "Engicam i.CoreM6 Quad/Dual MIPI Starter Kit";
+ compatible = "engicam,imx6-icore", "fsl,imx6q";
+};
+
+&hdmi {
+ ddc-i2c-bus = <&i2c2>;
+ status = "okay";
+};
+
+&usdhc3 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-icore-ofcap12.dts b/arch/arm/boot/dts/imx6q-icore-ofcap12.dts
index 9e230f56c5fb..6e27c8143f82 100644
--- a/arch/arm/boot/dts/imx6q-icore-ofcap12.dts
+++ b/arch/arm/boot/dts/imx6q-icore-ofcap12.dts
@@ -48,28 +48,31 @@
/ {
model = "Engicam i.CoreM6 Quad/Dual OpenFrame Capacitive touch 12 Kit";
compatible = "engicam,imx6-icore", "fsl,imx6q";
+
+ panel {
+ compatible = "koe,tx31d200vm0baa";
+ backlight = <&backlight_lvds>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
+ };
};
&ldb {
status = "okay";
lvds-channel@0 {
- fsl,data-mapping = "spwg";
- fsl,data-width = <18>;
+ reg = <0>;
status = "okay";
- display-timings {
- native-mode = <&timing0>;
- timing0: timing0 {
- clock-frequency = <46800000>;
- hactive = <1280>;
- vactive = <480>;
- hback-porch = <353>;
- hfront-porch = <47>;
- vback-porch = <39>;
- vfront-porch = <4>;
- hsync-len = <8>;
- vsync-len = <2>;
+ port@4 {
+ reg = <4>;
+
+ lvds0_out: endpoint {
+ remote-endpoint = <&panel_in>;
};
};
};
diff --git a/arch/arm/boot/dts/imx6q-kp-tpc.dts b/arch/arm/boot/dts/imx6q-kp-tpc.dts
new file mode 100644
index 000000000000..302d8d06e4cc
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-kp-tpc.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2018
+ * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
+ */
+
+/dts-v1/;
+
+#include "imx6q-kp.dtsi"
+
+/ {
+ model = "Freescale i.MX6 Qwuad K+P TPC Board";
+ compatible = "kiebackpeter,imx6q-tpc", "fsl,imx6q";
+
+ memory@10000000 {
+ reg = <0x10000000 0x40000000>;
+ };
+};
+
+&ipu1_di0_disp0 {
+ remote-endpoint = <&lcd_display_in>;
+};
diff --git a/arch/arm/boot/dts/imx6q-kp.dtsi b/arch/arm/boot/dts/imx6q-kp.dtsi
new file mode 100644
index 000000000000..24c8169baf44
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-kp.dtsi
@@ -0,0 +1,432 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2018
+ * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
+ */
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/sound/fsl-imx-audmux.h>
+
+/ {
+ backlight_lcd: backlight-lcd {
+ compatible = "pwm-backlight";
+ pwms = <&pwm1 0 5000000>;
+ brightness-levels = <0 255>;
+ num-interpolated-steps = <255>;
+ default-brightness-level = <250>;
+ };
+
+ beeper {
+ compatible = "pwm-beeper";
+ pwms = <&pwm2 0 500000>;
+ };
+
+ lcd_display: display {
+ compatible = "fsl,imx-parallel-display";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interface-pix-fmt = "rgb24";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ipu1>;
+
+ port@0 {
+ reg = <0>;
+
+ lcd_display_in: endpoint {
+ remote-endpoint = <&ipu1_di0_disp0>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ lcd_display_out: endpoint {
+ remote-endpoint = <&lcd_panel_in>;
+ };
+ };
+ };
+
+ lcd_panel: lcd-panel {
+ compatible = "auo,g070vvn01";
+ backlight = <&backlight_lcd>;
+ power-supply = <&reg_display>;
+
+ port {
+ lcd_panel_in: endpoint {
+ remote-endpoint = <&lcd_display_out>;
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ green {
+ label = "led1";
+ gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "gpio";
+ default-state = "off";
+ };
+
+ red {
+ label = "led0";
+ gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "gpio";
+ default-state = "off";
+ };
+ };
+
+ reg_3p3v: regulator-3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_audio: regulator-audio {
+ compatible = "regulator-fixed";
+ regulator-name = "sgtl5000-supply";
+ gpio = <&gpio6 31 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-always-on;
+ };
+
+ reg_display: regulator-display {
+ compatible = "regulator-fixed";
+ regulator-name = "display-supply";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_usb_h1_vbus: regulator-usb_h1_vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_h1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "imx6q-sgtl5000-audio";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,bitclock-master = <&codec_dai>;
+ simple-audio-card,frame-master = <&codec_dai>;
+
+ cpu_dai: simple-audio-card,cpu {
+ sound-dai = <&ssi1>;
+ };
+
+ codec_dai: simple-audio-card,codec {
+ sound-dai = <&sgtl5000>;
+ };
+ };
+};
+
+&audmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux>;
+ status = "okay";
+
+ ssi1 {
+ fsl,audmux-port = <0>;
+ fsl,port-config = <
+ (IMX_AUDMUX_V2_PTCR_SYN |
+ IMX_AUDMUX_V2_PTCR_TFSEL(2) |
+ IMX_AUDMUX_V2_PTCR_TCSEL(2) |
+ IMX_AUDMUX_V2_PTCR_TFSDIR |
+ IMX_AUDMUX_V2_PTCR_TCLKDIR)
+ IMX_AUDMUX_V2_PDCR_RXDSEL(2)
+ >;
+ };
+
+ aud3 {
+ fsl,audmux-port = <2>;
+ fsl,port-config = <
+ IMX_AUDMUX_V2_PTCR_SYN
+ IMX_AUDMUX_V2_PDCR_RXDSEL(0)
+ >;
+ };
+};
+
+&can1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan1>;
+};
+
+&can2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan2>;
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet>;
+ phy-mode = "rgmii";
+ fsl,magic-packet;
+ status = "okay";
+};
+
+&i2c1 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ touchscreen@5d {
+ compatible = "goodix,gt911";
+ reg = <0x5d>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ts>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+ irq-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+ };
+
+ ds1307: rtc@32 {
+ compatible = "dallas,ds1307";
+ reg = <0x32>;
+ };
+};
+
+&i2c2 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+
+ sgtl5000: audio-codec@a {
+ compatible = "fsl,sgtl5000";
+ #sound-dai-cells = <0>;
+ reg = <0x0a>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_codec>;
+ clocks = <&clks IMX6QDL_CLK_CKO>;
+ VDDA-supply = <&reg_3p3v>;
+ VDDIO-supply = <&reg_3p3v>;
+ };
+};
+
+&iomuxc {
+ pinctrl_audmux: audmuxgrp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0
+ MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0
+ MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0
+ MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0
+ >;
+ };
+
+ pinctrl_codec: codecgrp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0x1b0b0
+ /* sgtl5000 sys_mclk clock routed to CLKO1 */
+ MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000b0
+ >;
+ };
+
+ pinctrl_enet: enetgrp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0
+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0
+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0
+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0
+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0
+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
+ MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
+ >;
+ };
+
+ pinctrl_flexcan1: can1grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_7__FLEXCAN1_TX 0x1b0b0
+ MX6QDL_PAD_GPIO_8__FLEXCAN1_RX 0x1b0b0
+ >;
+ };
+
+ pinctrl_flexcan2: can2grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b0b0
+ MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b0b0
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
+ MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_ipu1: ipu1grp {
+ fsl,pins = <
+ MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
+ MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x10
+ MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10
+ MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10
+ MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x10
+ MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10
+ MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10
+ MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10
+ MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10
+ MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10
+ MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10
+ MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10
+ MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10
+ MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10
+ MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10
+ MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10
+ MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10
+ MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10
+ MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10
+ MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10
+ MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10
+ MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10
+ MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10
+ MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10
+ MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10
+ MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10
+ MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10
+ MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10
+ >;
+ };
+
+ pinctrl_pwm1: pwm1grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1
+ >;
+ };
+
+ pinctrl_pwm2: pwm2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1
+ >;
+ };
+
+ pinctrl_ts: tsgrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0
+ MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x1b0b0
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
+ MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D28__UART2_CTS_B 0x1b0b1
+ MX6QDL_PAD_EIM_D29__UART2_RTS_B 0x1b0b1
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059
+ MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059
+ MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
+ MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
+ MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
+ MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
+ >;
+ };
+
+ pinctrl_usdhc4: usdhc4grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059
+ MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059
+ MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059
+ MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059
+ MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059
+ MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059
+ MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059
+ MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059
+ MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059
+ MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059
+ >;
+ };
+};
+
+&pwm1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm1>;
+ status = "okay";
+};
+
+&pwm2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm2>;
+ status = "okay";
+};
+
+&ssi1 {
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ uart-has-rtscts;
+};
+
+&usbh1 {
+ status = "okay";
+};
+
+&usdhc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ bus-width = <4>;
+ cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&usdhc4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc4>;
+ bus-width = <8>;
+ non-removable;
+ no-1-8-v;
+ keep-power-in-suspend;
+ status = "okay";
+};
+
+&wdog1 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-novena.dts b/arch/arm/boot/dts/imx6q-novena.dts
index 52f39371188d..fcd824dc485b 100644
--- a/arch/arm/boot/dts/imx6q-novena.dts
+++ b/arch/arm/boot/dts/imx6q-novena.dts
@@ -268,8 +268,6 @@
touch: stmpe811@44 {
compatible = "st,stmpe811";
reg = <0x44>;
- #address-cells = <1>;
- #size-cells = <0>;
irq-gpio = <&gpio5 13 GPIO_ACTIVE_HIGH>;
id = <0>;
blocks = <0x5>;
diff --git a/arch/arm/boot/dts/imx6q-pistachio.dts b/arch/arm/boot/dts/imx6q-pistachio.dts
index bd57b3b74db7..a31e83cd07a3 100644
--- a/arch/arm/boot/dts/imx6q-pistachio.dts
+++ b/arch/arm/boot/dts/imx6q-pistachio.dts
@@ -614,7 +614,7 @@
&uart5 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart5>;
- fsl,uart-has-rtscts;
+ uart-has-rtscts;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx6q-sabreauto.dts b/arch/arm/boot/dts/imx6q-sabreauto.dts
index 334b9247e78c..6e981a3e0a83 100644
--- a/arch/arm/boot/dts/imx6q-sabreauto.dts
+++ b/arch/arm/boot/dts/imx6q-sabreauto.dts
@@ -1,14 +1,7 @@
-/*
- * Copyright 2012 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2012 Freescale Semiconductor, Inc.
+// Copyright 2011 Linaro Ltd.
/dts-v1/;
diff --git a/arch/arm/boot/dts/imx6q-sabresd.dts b/arch/arm/boot/dts/imx6q-sabresd.dts
index 527772b62fee..eec944673c0b 100644
--- a/arch/arm/boot/dts/imx6q-sabresd.dts
+++ b/arch/arm/boot/dts/imx6q-sabresd.dts
@@ -1,14 +1,7 @@
-/*
- * Copyright 2012 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2012 Freescale Semiconductor, Inc.
+// Copyright 2011 Linaro Ltd.
/dts-v1/;
diff --git a/arch/arm/boot/dts/imx6q-udoo.dts b/arch/arm/boot/dts/imx6q-udoo.dts
index c3e64ff3d544..52e9f4a211d0 100644
--- a/arch/arm/boot/dts/imx6q-udoo.dts
+++ b/arch/arm/boot/dts/imx6q-udoo.dts
@@ -1,12 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Copyright 2013 Freescale Semiconductor, Inc.
*
* Author: Fabio Estevam <fabio.estevam@freescale.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
*/
/dts-v1/;
#include "imx6q.dtsi"
diff --git a/arch/arm/boot/dts/imx6q-utilite-pro.dts b/arch/arm/boot/dts/imx6q-utilite-pro.dts
index f5d9c34b0d39..d16ff2083d62 100644
--- a/arch/arm/boot/dts/imx6q-utilite-pro.dts
+++ b/arch/arm/boot/dts/imx6q-utilite-pro.dts
@@ -61,8 +61,6 @@
encoder {
compatible = "ti,tfp410";
- #address-cells = <1>;
- #size-cells = <0>;
ports {
#address-cells = <1>;
diff --git a/arch/arm/boot/dts/imx6q-var-dt6customboard.dts b/arch/arm/boot/dts/imx6q-var-dt6customboard.dts
index e0728d475f6f..f2368a073d07 100644
--- a/arch/arm/boot/dts/imx6q-var-dt6customboard.dts
+++ b/arch/arm/boot/dts/imx6q-var-dt6customboard.dts
@@ -26,8 +26,6 @@
gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
autorepeat;
back {
diff --git a/arch/arm/boot/dts/imx6q-wandboard-revb1.dts b/arch/arm/boot/dts/imx6q-wandboard-revb1.dts
index b763352cddae..be85b980bdfe 100644
--- a/arch/arm/boot/dts/imx6q-wandboard-revb1.dts
+++ b/arch/arm/boot/dts/imx6q-wandboard-revb1.dts
@@ -1,12 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Copyright 2013 Freescale Semiconductor, Inc.
*
* Author: Fabio Estevam <fabio.estevam@freescale.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
*/
/dts-v1/;
#include "imx6q.dtsi"
diff --git a/arch/arm/boot/dts/imx6q-wandboard-revd1.dts b/arch/arm/boot/dts/imx6q-wandboard-revd1.dts
index 8691fab21058..fcfba28764d4 100644
--- a/arch/arm/boot/dts/imx6q-wandboard-revd1.dts
+++ b/arch/arm/boot/dts/imx6q-wandboard-revd1.dts
@@ -1,12 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Copyright 2013 Freescale Semiconductor, Inc.
*
* Author: Fabio Estevam <fabio.estevam@freescale.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
*/
/dts-v1/;
#include "imx6q.dtsi"
diff --git a/arch/arm/boot/dts/imx6q-wandboard.dts b/arch/arm/boot/dts/imx6q-wandboard.dts
index 2a3d98c1489a..fa36fe183fc0 100644
--- a/arch/arm/boot/dts/imx6q-wandboard.dts
+++ b/arch/arm/boot/dts/imx6q-wandboard.dts
@@ -1,12 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Copyright 2013 Freescale Semiconductor, Inc.
*
* Author: Fabio Estevam <fabio.estevam@freescale.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
*/
/dts-v1/;
#include "imx6q.dtsi"
diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
index ae7b3f107893..70483ce72ba6 100644
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -1,12 +1,6 @@
-
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2013 Freescale Semiconductor, Inc.
#include <dt-bindings/interrupt-controller/irq.h>
#include "imx6q-pinfunc.h"
@@ -162,22 +156,27 @@
#size-cells = <0>;
reg = <2>;
- ipu2_di0_disp0: disp0-endpoint {
+ ipu2_di0_disp0: endpoint@0 {
+ reg = <0>;
};
- ipu2_di0_hdmi: hdmi-endpoint {
+ ipu2_di0_hdmi: endpoint@1 {
+ reg = <1>;
remote-endpoint = <&hdmi_mux_2>;
};
- ipu2_di0_mipi: mipi-endpoint {
+ ipu2_di0_mipi: endpoint@2 {
+ reg = <2>;
remote-endpoint = <&mipi_mux_2>;
};
- ipu2_di0_lvds0: lvds0-endpoint {
+ ipu2_di0_lvds0: endpoint@3 {
+ reg = <3>;
remote-endpoint = <&lvds0_mux_2>;
};
- ipu2_di0_lvds1: lvds1-endpoint {
+ ipu2_di0_lvds1: endpoint@4 {
+ reg = <4>;
remote-endpoint = <&lvds1_mux_2>;
};
};
@@ -187,19 +186,23 @@
#size-cells = <0>;
reg = <3>;
- ipu2_di1_hdmi: hdmi-endpoint {
+ ipu2_di1_hdmi: endpoint@1 {
+ reg = <1>;
remote-endpoint = <&hdmi_mux_3>;
};
- ipu2_di1_mipi: mipi-endpoint {
+ ipu2_di1_mipi: endpoint@2 {
+ reg = <2>;
remote-endpoint = <&mipi_mux_3>;
};
- ipu2_di1_lvds0: lvds0-endpoint {
+ ipu2_di1_lvds0: endpoint@3 {
+ reg = <3>;
remote-endpoint = <&lvds0_mux_3>;
};
- ipu2_di1_lvds1: lvds1-endpoint {
+ ipu2_di1_lvds1: endpoint@4 {
+ reg = <4>;
remote-endpoint = <&lvds1_mux_3>;
};
};
diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
index 8206683172d2..64fbee61de44 100644
--- a/arch/arm/boot/dts/imx6qdl-apalis.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
@@ -331,8 +331,6 @@
compatible = "st,stmpe811";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_touch_int>;
- #address-cells = <1>;
- #size-cells = <0>;
reg = <0x41>;
interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
interrupt-parent = <&gpio4>;
diff --git a/arch/arm/boot/dts/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/imx6qdl-colibri.dtsi
index e4eb300549d4..76035db96f67 100644
--- a/arch/arm/boot/dts/imx6qdl-colibri.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-colibri.dtsi
@@ -262,8 +262,6 @@
compatible = "st,stmpe811";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_touch_int>;
- #address-cells = <1>;
- #size-cells = <0>;
reg = <0x41>;
interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
interrupt-parent = <&gpio6>;
diff --git a/arch/arm/boot/dts/imx6qdl-gw5904.dtsi b/arch/arm/boot/dts/imx6qdl-gw5904.dtsi
index 58124adfd65b..3c52bdb453f3 100644
--- a/arch/arm/boot/dts/imx6qdl-gw5904.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw5904.dtsi
@@ -162,8 +162,6 @@
switch@0 {
compatible = "marvell,mv88e6085";
- #address-cells = <1>;
- #size-cells = <0>;
reg = <0>;
ports {
diff --git a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi
index 7e20b47de839..0e64016e765f 100644
--- a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi
@@ -38,6 +38,7 @@
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
+#include <dt-bindings/sound/fsl-imx-audmux.h>
/ {
/* Will be filled by the bootloader */
@@ -110,17 +111,27 @@
vin-supply = <&v_5v0>;
};
- sound-sgtl5000 {
- audio-codec = <&sgtl5000>;
- audio-routing =
- "MIC_IN", "Mic Jack",
- "Mic Jack", "Mic Bias",
+ audio: sound-sgtl5000 {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "On-board Codec";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,bitclock-master = <&sound_codec>;
+ simple-audio-card,frame-master = <&sound_codec>;
+ simple-audio-card,widgets =
+ "Microphone", "Headphone Jack",
+ "Headphone", "Headphone Jack";
+ simple-audio-card,routing =
+ "MIC_IN", "Headphone Jack",
+ "Headphone Jack", "Mic Bias",
"Headphone Jack", "HP_OUT";
- compatible = "fsl,imx-audio-sgtl5000";
- model = "On-board Codec";
- mux-ext-port = <5>;
- mux-int-port = <1>;
- ssi-controller = <&ssi1>;
+
+ sound_cpu: simple-audio-card,cpu {
+ sound-dai = <&ssi1>;
+ };
+
+ sound_codec: simple-audio-card,codec {
+ sound-dai = <&sgtl5000>;
+ };
};
sound-spdif {
@@ -134,6 +145,26 @@
&audmux {
status = "okay";
+
+ ssi1 {
+ fsl,audmux-port = <0>;
+ fsl,port-config = <
+ (IMX_AUDMUX_V2_PTCR_SYN |
+ IMX_AUDMUX_V2_PTCR_TFSEL(4) |
+ IMX_AUDMUX_V2_PTCR_TCSEL(4) |
+ IMX_AUDMUX_V2_PTCR_TFSDIR |
+ IMX_AUDMUX_V2_PTCR_TCLKDIR)
+ IMX_AUDMUX_V2_PDCR_RXDSEL(4)
+ >;
+ };
+
+ pins5 {
+ fsl,audmux-port = <4>;
+ fsl,port-config = <
+ IMX_AUDMUX_V2_PTCR_SYN
+ IMX_AUDMUX_V2_PDCR_RXDSEL(0)
+ >;
+ };
};
&can1 {
@@ -166,6 +197,7 @@
compatible = "fsl,sgtl5000";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hummingboard_sgtl5000>;
+ #sound-dai-cells = <0>;
reg = <0x0a>;
VDDA-supply = <&v_3v2>;
VDDIO-supply = <&v_3v2>;
diff --git a/arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi b/arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi
index 98241acb08a6..c413f9c3540f 100644
--- a/arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi
@@ -38,6 +38,7 @@
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
+#include <dt-bindings/sound/fsl-imx-audmux.h>
/ {
/* Will be filled by the bootloader */
@@ -150,22 +151,52 @@
vin-supply = <&v_5v0>;
};
- sound-sgtl5000 {
- audio-codec = <&sgtl5000>;
- audio-routing =
+ audio: sound-sgtl5000 {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "On-board Codec";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,bitclock-master = <&sound_codec>;
+ simple-audio-card,frame-master = <&sound_codec>;
+ simple-audio-card,widgets =
+ "Microphone", "Mic Jack",
+ "Headphone", "Headphone Jack";
+ simple-audio-card,routing =
"MIC_IN", "Mic Jack",
"Mic Jack", "Mic Bias",
"Headphone Jack", "HP_OUT";
- compatible = "fsl,imx-audio-sgtl5000";
- model = "On-board Codec";
- mux-ext-port = <5>;
- mux-int-port = <1>;
- ssi-controller = <&ssi1>;
+
+ sound_cpu: simple-audio-card,cpu {
+ sound-dai = <&ssi1>;
+ };
+
+ sound_codec: simple-audio-card,codec {
+ sound-dai = <&sgtl5000>;
+ };
};
};
&audmux {
status = "okay";
+
+ ssi1 {
+ fsl,audmux-port = <0>;
+ fsl,port-config = <
+ (IMX_AUDMUX_V2_PTCR_SYN |
+ IMX_AUDMUX_V2_PTCR_TFSEL(4) |
+ IMX_AUDMUX_V2_PTCR_TCSEL(4) |
+ IMX_AUDMUX_V2_PTCR_TFSDIR |
+ IMX_AUDMUX_V2_PTCR_TCLKDIR)
+ IMX_AUDMUX_V2_PDCR_RXDSEL(4)
+ >;
+ };
+
+ pins5 {
+ fsl,audmux-port = <4>;
+ fsl,port-config = <
+ IMX_AUDMUX_V2_PTCR_SYN
+ IMX_AUDMUX_V2_PDCR_RXDSEL(0)
+ >;
+ };
};
&ecspi2 {
diff --git a/arch/arm/boot/dts/imx6qdl-icore.dtsi b/arch/arm/boot/dts/imx6qdl-icore.dtsi
index b3a463a5908b..0a1574998fc6 100644
--- a/arch/arm/boot/dts/imx6qdl-icore.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-icore.dtsi
@@ -49,7 +49,7 @@
reg = <0x10000000 0x80000000>;
};
- backlight {
+ backlight_lvds: backlight-lvds {
compatible = "pwm-backlight";
pwms = <&pwm3 0 100000>;
brightness-levels = <0 4 8 16 32 64 128 255>;
@@ -265,6 +265,14 @@
status = "okay";
};
+&usdhc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ no-1-8-v;
+ non-removable;
+ status = "disabled";
+};
+
&iomuxc {
pinctrl_audmux: audmux {
fsl,pins = <
@@ -378,4 +386,19 @@
MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17070
>;
};
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+ MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059
+ MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059
+ MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059
+ MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
+ >;
+ };
};
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
index c58f3443d55d..ed1aafd56973 100644
--- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
@@ -115,7 +115,7 @@
compatible = "dlg,da9063";
reg = <0x58>;
interrupt-parent = <&gpio2>;
- interrupts = <9 0x8>; /* active-low GPIO2_9 */
+ interrupts = <9 IRQ_TYPE_LEVEL_LOW>; /* active-low GPIO2_9 */
regulators {
vddcore_reg: bcore1 {
diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
index 54b0139e978d..0e28e36ddbb2 100644
--- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
@@ -1,14 +1,7 @@
-/*
- * Copyright 2012 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2012 Freescale Semiconductor, Inc.
+// Copyright 2011 Linaro Ltd.
#include <dt-bindings/gpio/gpio.h>
diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
index 18b65052553d..654cf2c9b073 100644
--- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
@@ -379,9 +379,6 @@
powerdown-gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>; /* NANDF_WP_B */
port {
- #address-cells = <1>;
- #size-cells = <0>;
-
ov5640_to_mipi_csi2: endpoint {
remote-endpoint = <&mipi_csi2_in>;
clock-lanes = <0>;
diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
index f019f9900369..15744ad52535 100644
--- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
@@ -1,14 +1,7 @@
-/*
- * Copyright 2012 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2012 Freescale Semiconductor, Inc.
+// Copyright 2011 Linaro Ltd.
#include <dt-bindings/clock/imx6qdl-clock.h>
#include <dt-bindings/gpio/gpio.h>
@@ -294,9 +287,6 @@
reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
port {
- #address-cells = <1>;
- #size-cells = <0>;
-
ov5640_to_mipi_csi2: endpoint {
remote-endpoint = <&mipi_csi2_in>;
clock-lanes = <0>;
diff --git a/arch/arm/boot/dts/imx6qdl-tx6-lcd.dtsi b/arch/arm/boot/dts/imx6qdl-tx6-lcd.dtsi
index 5102fc47380b..79f2354886b7 100644
--- a/arch/arm/boot/dts/imx6qdl-tx6-lcd.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-tx6-lcd.dtsi
@@ -77,7 +77,6 @@
enable-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>;
power-supply = <&reg_3v3>;
backlight = <&backlight>;
- bus-format-override = "rgb24";
port {
lcd_panel_in: endpoint {
diff --git a/arch/arm/boot/dts/imx6qdl-tx6-mb7.dtsi b/arch/arm/boot/dts/imx6qdl-tx6-mb7.dtsi
index 4c4e2e1a931f..410972e1dca9 100644
--- a/arch/arm/boot/dts/imx6qdl-tx6-mb7.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-tx6-mb7.dtsi
@@ -54,19 +54,16 @@
lcd-panel {
compatible = "edt,et057090dhu";
- bus-format-override = "rgb24";
pixelclk-active = <0>;
};
lvds0-panel {
compatible = "edt,etml1010g0dka";
- bus-format-override = "spwg-18";
pixelclk-active = <0>;
};
lvds1-panel {
compatible = "edt,etml1010g0dka";
- bus-format-override = "spwg-18";
pixelclk-active = <0>;
};
};
diff --git a/arch/arm/boot/dts/imx6qdl-tx6.dtsi b/arch/arm/boot/dts/imx6qdl-tx6.dtsi
index f015e2d1cf35..a98fb2564c63 100644
--- a/arch/arm/boot/dts/imx6qdl-tx6.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-tx6.dtsi
@@ -50,11 +50,11 @@
can0 = &can2;
can1 = &can1;
ethernet0 = &fec;
- lcdif_23bit_pins_a = &pinctrl_disp0_1;
- lcdif_24bit_pins_a = &pinctrl_disp0_2;
+ lcdif-23bit-pins-a = &pinctrl_disp0_1;
+ lcdif-24bit-pins-a = &pinctrl_disp0_2;
pwm0 = &pwm1;
pwm1 = &pwm2;
- reg_can_xcvr = &reg_can_xcvr;
+ reg-can-xcvr = &reg_can_xcvr;
stk5led = &user_led;
usbotg = &usbotg;
sdhc0 = &usdhc1;
diff --git a/arch/arm/boot/dts/imx6qdl-udoo.dtsi b/arch/arm/boot/dts/imx6qdl-udoo.dtsi
index 906387915dc5..4f27861bbb32 100644
--- a/arch/arm/boot/dts/imx6qdl-udoo.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-udoo.dtsi
@@ -1,12 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Copyright 2013 Freescale Semiconductor, Inc.
*
* Author: Fabio Estevam <fabio.estevam@freescale.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
*/
/ {
diff --git a/arch/arm/boot/dts/imx6qdl-wandboard-revb1.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard-revb1.dtsi
index a32089132263..855dc6f9df75 100644
--- a/arch/arm/boot/dts/imx6qdl-wandboard-revb1.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-wandboard-revb1.dtsi
@@ -17,7 +17,6 @@
imx6qdl-wandboard {
pinctrl_hog: hoggrp {
fsl,pins = <
- MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* GPIO_0_CLKO */
MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 /* uSDHC1 CD */
MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0x80000000 /* uSDHC3 CD */
MX6QDL_PAD_EIM_EB1__GPIO2_IO29 0x0f0b0 /* WL_REF_ON */
diff --git a/arch/arm/boot/dts/imx6qdl-wandboard-revc1.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard-revc1.dtsi
index 8d893a78cdf0..49a0a557e62e 100644
--- a/arch/arm/boot/dts/imx6qdl-wandboard-revc1.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-wandboard-revc1.dtsi
@@ -17,7 +17,6 @@
imx6qdl-wandboard {
pinctrl_hog: hoggrp {
fsl,pins = <
- MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* GPIO_0_CLKO */
MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 /* uSDHC1 CD */
MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0x80000000 /* uSDHC3 CD */
MX6QDL_PAD_CSI0_DAT14__GPIO6_IO00 0x0f0b0 /* WIFI_ON (reset, active low) */
diff --git a/arch/arm/boot/dts/imx6qdl-wandboard-revd1.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard-revd1.dtsi
index 3a8a4952d45e..69d9c8661439 100644
--- a/arch/arm/boot/dts/imx6qdl-wandboard-revd1.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-wandboard-revd1.dtsi
@@ -147,7 +147,6 @@
imx6qdl-wandboard {
pinctrl_hog: hoggrp {
fsl,pins = <
- MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0
MX6QDL_PAD_EIM_D22__USB_OTG_PWR 0x80000000 /* USB Power Enable */
MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 /* USDHC1 CD */
MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0x80000000 /* uSDHC3 CD */
diff --git a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
index ed96d7b5feab..e1afa54404d0 100644
--- a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
@@ -1,12 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Copyright 2013 Freescale Semiconductor, Inc.
*
* Author: Fabio Estevam <fabio.estevam@freescale.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
*/
#include <dt-bindings/gpio/gpio.h>
@@ -83,6 +79,8 @@
status = "okay";
codec: sgtl5000@a {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mclk>;
compatible = "fsl,sgtl5000";
reg = <0x0a>;
clocks = <&clks IMX6QDL_CLK_CKO>;
@@ -142,6 +140,12 @@
>;
};
+ pinctrl_mclk: mclkgrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0
+ >;
+ };
+
pinctrl_spdif: spdifgrp {
fsl,pins = <
MX6QDL_PAD_ENET_RXD0__SPDIF_OUT 0x1b0b0
diff --git a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
index 911f7f0e3cea..19a075aee19e 100644
--- a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
@@ -263,6 +263,17 @@
};
};
+&cpu0 {
+ fsl,soc-operating-points = <
+ /* ARM kHz SOC-PU uV */
+ 1200000 1300000
+ 996000 1275000
+ 852000 1275000
+ 792000 1200000
+ 396000 1200000
+ >;
+};
+
&reg_arm {
vin-supply = <&sw1a_reg>;
};
@@ -571,6 +582,17 @@
};
};
+ touchscreen@2a {
+ compatible = "eeti,egalax_ts";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ts>;
+ reg = <0x2a>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+ wakeup-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+ status = "disabled";
+ };
+
hpa1: amp@60 {
compatible = "ti,tpa6130a2";
pinctrl-names = "default";
@@ -666,8 +688,6 @@
compatible = "marvell,mv88e6085";
pinctrl-0 = <&pinctrl_switch_irq>;
pinctrl-names = "default";
- #address-cells = <1>;
- #size-cells = <0>;
reg = <0>;
dsa,member = <0 0>;
eeprom-length = <512>;
diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index c003e62bf290..911141e24681 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -1,14 +1,7 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2011 Freescale Semiconductor, Inc.
+// Copyright 2011 Linaro Ltd.
#include <dt-bindings/clock/imx6qdl-clock.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -58,9 +51,6 @@
};
clocks {
- #address-cells = <1>;
- #size-cells = <0>;
-
ckil {
compatible = "fsl,imx-ckil", "fixed-clock";
#clock-cells = <0>;
@@ -695,11 +685,8 @@
interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>,
<0 54 IRQ_TYPE_LEVEL_HIGH>,
<0 127 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- regulator-1p1@20c8110 {
- reg = <0x20c8110>;
+ regulator-1p1 {
compatible = "fsl,anatop-regulator";
regulator-name = "vdd1p1";
regulator-min-microvolt = <1000000>;
@@ -714,8 +701,7 @@
anatop-enable-bit = <0>;
};
- regulator-3p0@20c8120 {
- reg = <0x20c8120>;
+ regulator-3p0 {
compatible = "fsl,anatop-regulator";
regulator-name = "vdd3p0";
regulator-min-microvolt = <2800000>;
@@ -730,8 +716,7 @@
anatop-enable-bit = <0>;
};
- regulator-2p5@20c8130 {
- reg = <0x20c8130>;
+ regulator-2p5 {
compatible = "fsl,anatop-regulator";
regulator-name = "vdd2p5";
regulator-min-microvolt = <2250000>;
@@ -746,8 +731,7 @@
anatop-enable-bit = <0>;
};
- reg_arm: regulator-vddcore@20c8140 {
- reg = <0x20c8140>;
+ reg_arm: regulator-vddcore {
compatible = "fsl,anatop-regulator";
regulator-name = "vddarm";
regulator-min-microvolt = <725000>;
@@ -764,8 +748,7 @@
anatop-max-voltage = <1450000>;
};
- reg_pu: regulator-vddpu@20c8140 {
- reg = <0x20c8140>;
+ reg_pu: regulator-vddpu {
compatible = "fsl,anatop-regulator";
regulator-name = "vddpu";
regulator-min-microvolt = <725000>;
@@ -782,8 +765,7 @@
anatop-max-voltage = <1450000>;
};
- reg_soc: regulator-vddsoc@20c8140 {
- reg = <0x20c8140>;
+ reg_soc: regulator-vddsoc {
compatible = "fsl,anatop-regulator";
regulator-name = "vddsoc";
regulator-min-microvolt = <725000>;
@@ -1187,8 +1169,6 @@
};
mipi_dsi: mipi@21e0000 {
- #address-cells = <1>;
- #size-cells = <0>;
reg = <0x021e0000 0x4000>;
status = "disabled";
@@ -1300,22 +1280,27 @@
#size-cells = <0>;
reg = <2>;
- ipu1_di0_disp0: disp0-endpoint {
+ ipu1_di0_disp0: endpoint@0 {
+ reg = <0>;
};
- ipu1_di0_hdmi: hdmi-endpoint {
+ ipu1_di0_hdmi: endpoint@1 {
+ reg = <1>;
remote-endpoint = <&hdmi_mux_0>;
};
- ipu1_di0_mipi: mipi-endpoint {
+ ipu1_di0_mipi: endpoint@2 {
+ reg = <2>;
remote-endpoint = <&mipi_mux_0>;
};
- ipu1_di0_lvds0: lvds0-endpoint {
+ ipu1_di0_lvds0: endpoint@3 {
+ reg = <3>;
remote-endpoint = <&lvds0_mux_0>;
};
- ipu1_di0_lvds1: lvds1-endpoint {
+ ipu1_di0_lvds1: endpoint@4 {
+ reg = <4>;
remote-endpoint = <&lvds1_mux_0>;
};
};
@@ -1325,22 +1310,27 @@
#size-cells = <0>;
reg = <3>;
- ipu1_di1_disp1: disp1-endpoint {
+ ipu1_di1_disp1: endpoint@0 {
+ reg = <0>;
};
- ipu1_di1_hdmi: hdmi-endpoint {
+ ipu1_di1_hdmi: endpoint@1 {
+ reg = <1>;
remote-endpoint = <&hdmi_mux_1>;
};
- ipu1_di1_mipi: mipi-endpoint {
+ ipu1_di1_mipi: endpoint@2 {
+ reg = <2>;
remote-endpoint = <&mipi_mux_1>;
};
- ipu1_di1_lvds0: lvds0-endpoint {
+ ipu1_di1_lvds0: endpoint@3 {
+ reg = <3>;
remote-endpoint = <&lvds0_mux_1>;
};
- ipu1_di1_lvds1: lvds1-endpoint {
+ ipu1_di1_lvds1: endpoint@4 {
+ reg = <4>;
remote-endpoint = <&lvds1_mux_1>;
};
};
diff --git a/arch/arm/boot/dts/imx6qp-sabreauto.dts b/arch/arm/boot/dts/imx6qp-sabreauto.dts
index 5ce3840d83d3..d4caeeb0af70 100644
--- a/arch/arm/boot/dts/imx6qp-sabreauto.dts
+++ b/arch/arm/boot/dts/imx6qp-sabreauto.dts
@@ -1,44 +1,6 @@
-/*
- * Copyright 2016 Freescale Semiconductor, Inc.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Copyright 2016 Freescale Semiconductor, Inc.
/dts-v1/;
diff --git a/arch/arm/boot/dts/imx6qp-sabresd.dts b/arch/arm/boot/dts/imx6qp-sabresd.dts
index a8a5004dd9c8..f1b9cb104fdd 100644
--- a/arch/arm/boot/dts/imx6qp-sabresd.dts
+++ b/arch/arm/boot/dts/imx6qp-sabresd.dts
@@ -1,44 +1,6 @@
-/*
- * Copyright 2016 Freescale Semiconductor, Inc.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Copyright 2016 Freescale Semiconductor, Inc.
/dts-v1/;
diff --git a/arch/arm/boot/dts/imx6qp-wandboard-revd1.dts b/arch/arm/boot/dts/imx6qp-wandboard-revd1.dts
index 907ba0c74ba6..bcca5ac5fa51 100644
--- a/arch/arm/boot/dts/imx6qp-wandboard-revd1.dts
+++ b/arch/arm/boot/dts/imx6qp-wandboard-revd1.dts
@@ -1,12 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Copyright 2013 Freescale Semiconductor, Inc.
*
* Author: Fabio Estevam <fabio.estevam@freescale.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
*/
/dts-v1/;
#include "imx6qp.dtsi"
diff --git a/arch/arm/boot/dts/imx6qp-zii-rdu2.dts b/arch/arm/boot/dts/imx6qp-zii-rdu2.dts
index de5b50df833c..8c293e9f36a7 100644
--- a/arch/arm/boot/dts/imx6qp-zii-rdu2.dts
+++ b/arch/arm/boot/dts/imx6qp-zii-rdu2.dts
@@ -53,3 +53,8 @@
reg = <0x10000000 0>;
};
};
+
+&gpu_3d {
+ assigned-clocks = <&clks IMX6QDL_CLK_GPU3D_SHADER_SEL>;
+ assigned-clock-parents = <&clks IMX6QDL_CLK_PLL2_PFD1_594M>;
+};
diff --git a/arch/arm/boot/dts/imx6qp.dtsi b/arch/arm/boot/dts/imx6qp.dtsi
index 5f4fdce715c1..5f51f8e5c1fa 100644
--- a/arch/arm/boot/dts/imx6qp.dtsi
+++ b/arch/arm/boot/dts/imx6qp.dtsi
@@ -1,44 +1,6 @@
-/*
- * Copyright 2016 Freescale Semiconductor, Inc.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Copyright 2016 Freescale Semiconductor, Inc.
#include "imx6q.dtsi"
diff --git a/arch/arm/boot/dts/imx6sl-evk.dts b/arch/arm/boot/dts/imx6sl-evk.dts
index 37e792fdc160..92ad01f676e3 100644
--- a/arch/arm/boot/dts/imx6sl-evk.dts
+++ b/arch/arm/boot/dts/imx6sl-evk.dts
@@ -1,10 +1,6 @@
-/*
- * Copyright (C) 2013 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
+// SPDX-License-Identifier: GPL-2.0
+//
+//Copyright (C) 2013 Freescale Semiconductor, Inc.
/dts-v1/;
diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi
index ab6a7e2e7e8f..994e48dc1df0 100644
--- a/arch/arm/boot/dts/imx6sl.dtsi
+++ b/arch/arm/boot/dts/imx6sl.dtsi
@@ -1,11 +1,6 @@
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2013 Freescale Semiconductor, Inc.
#include <dt-bindings/interrupt-controller/irq.h>
#include "imx6sl-pinfunc.h"
@@ -86,9 +81,6 @@
};
clocks {
- #address-cells = <1>;
- #size-cells = <0>;
-
ckil {
compatible = "fixed-clock";
#clock-cells = <0>;
@@ -527,11 +519,8 @@
interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>,
<0 54 IRQ_TYPE_LEVEL_HIGH>,
<0 127 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- regulator-1p1@20c8110 {
- reg = <0x20c8110>;
+ regulator-1p1 {
compatible = "fsl,anatop-regulator";
regulator-name = "vdd1p1";
regulator-min-microvolt = <800000>;
@@ -546,8 +535,7 @@
anatop-enable-bit = <0>;
};
- regulator-3p0@20c8120 {
- reg = <0x20c8120>;
+ regulator-3p0 {
compatible = "fsl,anatop-regulator";
regulator-name = "vdd3p0";
regulator-min-microvolt = <2800000>;
@@ -562,8 +550,7 @@
anatop-enable-bit = <0>;
};
- regulator-2p5@20c8130 {
- reg = <0x20c8130>;
+ regulator-2p5 {
compatible = "fsl,anatop-regulator";
regulator-name = "vdd2p5";
regulator-min-microvolt = <2100000>;
@@ -578,8 +565,7 @@
anatop-enable-bit = <0>;
};
- reg_arm: regulator-vddcore@20c8140 {
- reg = <0x20c8140>;
+ reg_arm: regulator-vddcore {
compatible = "fsl,anatop-regulator";
regulator-name = "vddarm";
regulator-min-microvolt = <725000>;
@@ -596,8 +582,7 @@
anatop-max-voltage = <1450000>;
};
- reg_pu: regulator-vddpu@20c8140 {
- reg = <0x20c8140>;
+ reg_pu: regulator-vddpu {
compatible = "fsl,anatop-regulator";
regulator-name = "vddpu";
regulator-min-microvolt = <725000>;
@@ -614,8 +599,7 @@
anatop-max-voltage = <1450000>;
};
- reg_soc: regulator-vddsoc@20c8140 {
- reg = <0x20c8140>;
+ reg_soc: regulator-vddsoc {
compatible = "fsl,anatop-regulator";
regulator-name = "vddsoc";
regulator-min-microvolt = <725000>;
diff --git a/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts b/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts
index b58f770c40d9..59e52f504922 100644
--- a/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts
+++ b/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts
@@ -48,8 +48,8 @@
compatible = "boundary,imx6sx-nitrogen6sx", "fsl,imx6sx";
aliases {
- fb_lcd = &lcdif1;
- t_lcd = &t_lcd;
+ fb-lcd = &lcdif1;
+ t-lcd = &t_lcd;
};
memory@80000000 {
diff --git a/arch/arm/boot/dts/imx6sx-sabreauto.dts b/arch/arm/boot/dts/imx6sx-sabreauto.dts
index 72da5acf35a2..841a27f3198f 100644
--- a/arch/arm/boot/dts/imx6sx-sabreauto.dts
+++ b/arch/arm/boot/dts/imx6sx-sabreauto.dts
@@ -1,10 +1,6 @@
-/*
- * Copyright (C) 2014 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2014 Freescale Semiconductor, Inc.
/dts-v1/;
@@ -18,25 +14,67 @@
reg = <0x80000000 0x80000000>;
};
- regulators {
- compatible = "simple-bus";
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_led>;
+
+ user {
+ label = "debug";
+ gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ vcc_sd3: regulator-vcc-sd3 {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_vcc_sd3>;
+ regulator-name = "VCC_SD3";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
+&anaclk2 {
+ clock-frequency = <24576000>;
+};
+
+&fec1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet1>;
+ phy-mode = "rgmii";
+ phy-handle = <&ethphy1>;
+ fsl,magic-packet;
+ status = "okay";
+
+ mdio {
#address-cells = <1>;
#size-cells = <0>;
- vcc_sd3: regulator@0 {
- compatible = "regulator-fixed";
+ ethphy0: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
reg = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_vcc_sd3>;
- regulator-name = "VCC_SD3";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
- enable-active-high;
+ };
+
+ ethphy1: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
};
};
};
+&fec2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet2>;
+ phy-mode = "rgmii";
+ phy-handle = <&ethphy0>;
+ fsl,magic-packet;
+ status = "okay";
+};
+
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
@@ -69,78 +107,297 @@
};
&iomuxc {
- imx6x-sabreauto {
- pinctrl_uart1: uart1grp {
- fsl,pins = <
- MX6SX_PAD_GPIO1_IO04__UART1_TX 0x1b0b1
- MX6SX_PAD_GPIO1_IO05__UART1_RX 0x1b0b1
- >;
- };
+ pinctrl_egalax_int: egalax-intgrp {
+ fsl,pins = <
+ MX6SX_PAD_SD4_RESET_B__GPIO6_IO_22 0x10b0
+ >;
+ };
- pinctrl_usdhc3: usdhc3grp {
- fsl,pins = <
- MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x17059
- MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x10059
- MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x17059
- MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x17059
- MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x17059
- MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x17059
- MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x17059
- MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x17059
- MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x17059
- MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x17059
- MX6SX_PAD_KEY_COL0__GPIO2_IO_10 0x17059 /* CD */
- MX6SX_PAD_KEY_ROW0__GPIO2_IO_15 0x17059 /* WP */
- >;
- };
+ pinctrl_enet1: enet1grp {
+ fsl,pins = <
+ MX6SX_PAD_ENET1_MDIO__ENET1_MDIO 0xa0b1
+ MX6SX_PAD_ENET1_MDC__ENET1_MDC 0xa0b1
+ MX6SX_PAD_RGMII1_TXC__ENET1_RGMII_TXC 0xa0b9
+ MX6SX_PAD_RGMII1_TD0__ENET1_TX_DATA_0 0xa0b1
+ MX6SX_PAD_RGMII1_TD1__ENET1_TX_DATA_1 0xa0b1
+ MX6SX_PAD_RGMII1_TD2__ENET1_TX_DATA_2 0xa0b1
+ MX6SX_PAD_RGMII1_TD3__ENET1_TX_DATA_3 0xa0b1
+ MX6SX_PAD_RGMII1_TX_CTL__ENET1_TX_EN 0xa0b1
+ MX6SX_PAD_RGMII1_RXC__ENET1_RX_CLK 0x3081
+ MX6SX_PAD_RGMII1_RD0__ENET1_RX_DATA_0 0x3081
+ MX6SX_PAD_RGMII1_RD1__ENET1_RX_DATA_1 0x3081
+ MX6SX_PAD_RGMII1_RD2__ENET1_RX_DATA_2 0x3081
+ MX6SX_PAD_RGMII1_RD3__ENET1_RX_DATA_3 0x3081
+ MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN 0x3081
+ >;
+ };
- pinctrl_usdhc3_100mhz: usdhc3grp-100mhz {
- fsl,pins = <
- MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x170b9
- MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x100b9
- MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x170b9
- MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x170b9
- MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x170b9
- MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x170b9
- MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x170b9
- MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x170b9
- MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x170b9
- MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x170b9
- >;
- };
+ pinctrl_enet2: enet2grp {
+ fsl,pins = <
+ MX6SX_PAD_RGMII2_TXC__ENET2_RGMII_TXC 0xa0b9
+ MX6SX_PAD_RGMII2_TD0__ENET2_TX_DATA_0 0xa0b1
+ MX6SX_PAD_RGMII2_TD1__ENET2_TX_DATA_1 0xa0b1
+ MX6SX_PAD_RGMII2_TD2__ENET2_TX_DATA_2 0xa0b1
+ MX6SX_PAD_RGMII2_TD3__ENET2_TX_DATA_3 0xa0b1
+ MX6SX_PAD_RGMII2_TX_CTL__ENET2_TX_EN 0xa0b1
+ MX6SX_PAD_RGMII2_RXC__ENET2_RX_CLK 0x3081
+ MX6SX_PAD_RGMII2_RD0__ENET2_RX_DATA_0 0x3081
+ MX6SX_PAD_RGMII2_RD1__ENET2_RX_DATA_1 0x3081
+ MX6SX_PAD_RGMII2_RD2__ENET2_RX_DATA_2 0x3081
+ MX6SX_PAD_RGMII2_RD3__ENET2_RX_DATA_3 0x3081
+ MX6SX_PAD_RGMII2_RX_CTL__ENET2_RX_EN 0x3081
+ >;
+ };
- pinctrl_usdhc3_200mhz: usdhc3grp-200mhz {
- fsl,pins = <
- MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x170f9
- MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x100f9
- MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x170f9
- MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x170f9
- MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x170f9
- MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x170f9
- MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x170f9
- MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x170f9
- MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x170f9
- MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x170f9
- >;
- };
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX6SX_PAD_GPIO1_IO03__I2C2_SDA 0x4001b8b1
+ MX6SX_PAD_GPIO1_IO02__I2C2_SCL 0x4001b8b1
+ >;
+ };
- pinctrl_usdhc4: usdhc4grp {
- fsl,pins = <
- MX6SX_PAD_SD4_CMD__USDHC4_CMD 0x17059
- MX6SX_PAD_SD4_CLK__USDHC4_CLK 0x10059
- MX6SX_PAD_SD4_DATA0__USDHC4_DATA0 0x17059
- MX6SX_PAD_SD4_DATA1__USDHC4_DATA1 0x17059
- MX6SX_PAD_SD4_DATA2__USDHC4_DATA2 0x17059
- MX6SX_PAD_SD4_DATA3__USDHC4_DATA3 0x17059
- MX6SX_PAD_SD4_DATA7__GPIO6_IO_21 0x17059 /* CD */
- MX6SX_PAD_SD4_DATA6__GPIO6_IO_20 0x17059 /* WP */
- >;
- };
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX6SX_PAD_KEY_ROW4__I2C3_SDA 0x4001b8b1
+ MX6SX_PAD_KEY_COL4__I2C3_SCL 0x4001b8b1
+ >;
+ };
+
+ pinctrl_led: ledgrp {
+ fsl,pins = <
+ MX6SX_PAD_CSI_PIXCLK__GPIO1_IO_24 0x17059
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6SX_PAD_GPIO1_IO04__UART1_TX 0x1b0b1
+ MX6SX_PAD_GPIO1_IO05__UART1_RX 0x1b0b1
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x17059
+ MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x10059
+ MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x17059
+ MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x17059
+ MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x17059
+ MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x17059
+ MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x17059
+ MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x17059
+ MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x17059
+ MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x17059
+ MX6SX_PAD_KEY_COL0__GPIO2_IO_10 0x17059 /* CD */
+ MX6SX_PAD_KEY_ROW0__GPIO2_IO_15 0x17059 /* WP */
+ >;
+ };
+
+ pinctrl_usdhc3_100mhz: usdhc3grp-100mhz {
+ fsl,pins = <
+ MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x170b9
+ MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x100b9
+ MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x170b9
+ MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x170b9
+ MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x170b9
+ MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x170b9
+ MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x170b9
+ MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x170b9
+ MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x170b9
+ MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x170b9
+ >;
+ };
+
+ pinctrl_usdhc3_200mhz: usdhc3grp-200mhz {
+ fsl,pins = <
+ MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x170f9
+ MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x100f9
+ MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x170f9
+ MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x170f9
+ MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x170f9
+ MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x170f9
+ MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x170f9
+ MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x170f9
+ MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x170f9
+ MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x170f9
+ >;
+ };
+
+ pinctrl_usdhc4: usdhc4grp {
+ fsl,pins = <
+ MX6SX_PAD_SD4_CMD__USDHC4_CMD 0x17059
+ MX6SX_PAD_SD4_CLK__USDHC4_CLK 0x10059
+ MX6SX_PAD_SD4_DATA0__USDHC4_DATA0 0x17059
+ MX6SX_PAD_SD4_DATA1__USDHC4_DATA1 0x17059
+ MX6SX_PAD_SD4_DATA2__USDHC4_DATA2 0x17059
+ MX6SX_PAD_SD4_DATA3__USDHC4_DATA3 0x17059
+ MX6SX_PAD_SD4_DATA7__GPIO6_IO_21 0x17059 /* CD */
+ MX6SX_PAD_SD4_DATA6__GPIO6_IO_20 0x17059 /* WP */
+ >;
+ };
+
+ pinctrl_vcc_sd3: vccsd3grp {
+ fsl,pins = <
+ MX6SX_PAD_KEY_COL1__GPIO2_IO_11 0x17059
+ >;
+ };
+
+ pinctrl_wdog: wdoggrp {
+ fsl,pins = <
+ MX6SX_PAD_GPIO1_IO13__WDOG1_WDOG_ANY 0x30b0
+ >;
+ };
+};
+
+&i2c2 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+
+ touchscreen@4 {
+ compatible = "eeti,egalax_ts";
+ reg = <0x04>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_egalax_int>;
+ interrupt-parent = <&gpio6>;
+ interrupts = <22 IRQ_TYPE_EDGE_FALLING>;
+ wakeup-gpios = <&gpio6 22 GPIO_ACTIVE_HIGH>;
+ };
+
+ pfuze100: pmic@8 {
+ compatible = "fsl,pfuze100";
+ reg = <0x08>;
+
+ regulators {
+ sw1a_reg: sw1ab {
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1875000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ sw1c_reg: sw1c {
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1875000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ sw2_reg: sw2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3a_reg: sw3a {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1975000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3b_reg: sw3b {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1975000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw4_reg: sw4 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ swbst_reg: swbst {
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5150000>;
+ };
+
+ snvs_reg: vsnvs {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
- pinctrl_vcc_sd3: vccsd3grp {
- fsl,pins = <
- MX6SX_PAD_KEY_COL1__GPIO2_IO_11 0x17059
- >;
+ vref_reg: vrefddr {
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vgen1_reg: vgen1 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ regulator-always-on;
+ };
+
+ vgen2_reg: vgen2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ };
+
+ vgen3_reg: vgen3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen4_reg: vgen4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen5_reg: vgen5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen6_reg: vgen6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
};
};
+
+ max7322: gpio@68 {
+ compatible = "maxim,max7322";
+ reg = <0x68>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+};
+
+&i2c3 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+
+ max7310_a: gpio@30 {
+ compatible = "maxim,max7310";
+ reg = <0x30>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ max7310_b: gpio@32 {
+ compatible = "maxim,max7310";
+ reg = <0x32>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+};
+
+&wdog1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdog>;
+ fsl,ext-reset-output;
};
diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi
index 49c7205b8db8..d8b94f47498b 100644
--- a/arch/arm/boot/dts/imx6sx.dtsi
+++ b/arch/arm/boot/dts/imx6sx.dtsi
@@ -1,10 +1,6 @@
-/*
- * Copyright 2014 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2014 Freescale Semiconductor, Inc.
#include <dt-bindings/clock/imx6sx-clock.h>
#include <dt-bindings/gpio/gpio.h>
@@ -104,41 +100,46 @@
interrupt-parent = <&intc>;
};
- clocks {
- #address-cells = <1>;
- #size-cells = <0>;
+ ckil: clock-ckil {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-output-names = "ckil";
+ };
- ckil: clock@0 {
- compatible = "fixed-clock";
- reg = <0>;
- #clock-cells = <0>;
- clock-frequency = <32768>;
- clock-output-names = "ckil";
- };
+ osc: clock-osc {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24000000>;
+ clock-output-names = "osc";
+ };
- osc: clock@1 {
- compatible = "fixed-clock";
- reg = <1>;
- #clock-cells = <0>;
- clock-frequency = <24000000>;
- clock-output-names = "osc";
- };
+ ipp_di0: clock-ipp-di0 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ clock-output-names = "ipp_di0";
+ };
- ipp_di0: clock@2 {
- compatible = "fixed-clock";
- reg = <2>;
- #clock-cells = <0>;
- clock-frequency = <0>;
- clock-output-names = "ipp_di0";
- };
+ ipp_di1: clock-ipp-di1 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ clock-output-names = "ipp_di1";
+ };
- ipp_di1: clock@3 {
- compatible = "fixed-clock";
- reg = <3>;
- #clock-cells = <0>;
- clock-frequency = <0>;
- clock-output-names = "ipp_di1";
- };
+ anaclk1: clock-anaclk1 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ clock-output-names = "anaclk1";
+ };
+
+ anaclk2: clock-anaclk2 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ clock-output-names = "anaclk2";
};
tempmon: tempmon {
@@ -575,8 +576,8 @@
interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
#clock-cells = <1>;
- clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>;
- clock-names = "ckil", "osc", "ipp_di0", "ipp_di1";
+ clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>, <&anaclk1>, <&anaclk2>;
+ clock-names = "ckil", "osc", "ipp_di0", "ipp_di1", "anaclk1", "anaclk2";
};
anatop: anatop@20c8000 {
@@ -586,11 +587,8 @@
interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- regulator-1p1@20c8110 {
- reg = <0x20c8110>;
+ regulator-1p1 {
compatible = "fsl,anatop-regulator";
regulator-name = "vdd1p1";
regulator-min-microvolt = <800000>;
@@ -605,8 +603,7 @@
anatop-enable-bit = <0>;
};
- regulator-3p0@20c8120 {
- reg = <0x20c8120>;
+ regulator-3p0 {
compatible = "fsl,anatop-regulator";
regulator-name = "vdd3p0";
regulator-min-microvolt = <2800000>;
@@ -621,8 +618,7 @@
anatop-enable-bit = <0>;
};
- regulator-2p5@20c8130 {
- reg = <0x20c8130>;
+ regulator-2p5 {
compatible = "fsl,anatop-regulator";
regulator-name = "vdd2p5";
regulator-min-microvolt = <2100000>;
@@ -637,8 +633,7 @@
anatop-enable-bit = <0>;
};
- reg_arm: regulator-vddcore@20c8140 {
- reg = <0x20c8140>;
+ reg_arm: regulator-vddcore {
compatible = "fsl,anatop-regulator";
regulator-name = "vddarm";
regulator-min-microvolt = <725000>;
@@ -655,8 +650,7 @@
anatop-max-voltage = <1450000>;
};
- reg_pcie: regulator-vddpcie@20c8140 {
- reg = <0x20c8140>;
+ reg_pcie: regulator-vddpcie {
compatible = "fsl,anatop-regulator";
regulator-name = "vddpcie";
regulator-min-microvolt = <725000>;
@@ -672,8 +666,7 @@
anatop-max-voltage = <1450000>;
};
- reg_soc: regulator-vddsoc@20c8140 {
- reg = <0x20c8140>;
+ reg_soc: regulator-vddsoc {
compatible = "fsl,anatop-regulator";
regulator-name = "vddsoc";
regulator-min-microvolt = <725000>;
diff --git a/arch/arm/boot/dts/imx6ul-14x14-evk.dts b/arch/arm/boot/dts/imx6ul-14x14-evk.dts
index 6d720b20e7ed..2438669f149a 100644
--- a/arch/arm/boot/dts/imx6ul-14x14-evk.dts
+++ b/arch/arm/boot/dts/imx6ul-14x14-evk.dts
@@ -1,10 +1,6 @@
-/*
- * Copyright (C) 2015 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2015 Freescale Semiconductor, Inc.
/dts-v1/;
diff --git a/arch/arm/boot/dts/imx6ul-isiot.dtsi b/arch/arm/boot/dts/imx6ul-isiot.dtsi
index 921e12c69a00..cd9928551154 100644
--- a/arch/arm/boot/dts/imx6ul-isiot.dtsi
+++ b/arch/arm/boot/dts/imx6ul-isiot.dtsi
@@ -153,8 +153,6 @@
stmpe811: gpio-expander@44 {
compatible = "st,stmpe811";
reg = <0x44>;
- #address-cells = <1>;
- #size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_stmpe>;
interrupt-parent = <&gpio1>;
diff --git a/arch/arm/boot/dts/imx6ul-tx6ul-mainboard.dts b/arch/arm/boot/dts/imx6ul-tx6ul-mainboard.dts
index 2d80f7b50bc0..97686097a86e 100644
--- a/arch/arm/boot/dts/imx6ul-tx6ul-mainboard.dts
+++ b/arch/arm/boot/dts/imx6ul-tx6ul-mainboard.dts
@@ -48,7 +48,7 @@
compatible = "karo,imx6ul-tx6ul", "fsl,imx6ul";
aliases {
- lcdif_24bit_pins_a = &pinctrl_disp0_3;
+ lcdif-24bit-pins-a = &pinctrl_disp0_3;
mmc0 = &usdhc1;
/delete-property/ mmc1;
serial2 = &uart3;
diff --git a/arch/arm/boot/dts/imx6ul-tx6ul.dtsi b/arch/arm/boot/dts/imx6ul-tx6ul.dtsi
index f678d18ad44a..02b5ba42cd59 100644
--- a/arch/arm/boot/dts/imx6ul-tx6ul.dtsi
+++ b/arch/arm/boot/dts/imx6ul-tx6ul.dtsi
@@ -53,10 +53,10 @@
i2c2 = &i2c1;
i2c3 = &i2c3;
i2c4 = &i2c4;
- lcdif_23bit_pins_a = &pinctrl_disp0_1;
- lcdif_24bit_pins_a = &pinctrl_disp0_2;
+ lcdif-23bit-pins-a = &pinctrl_disp0_1;
+ lcdif-24bit-pins-a = &pinctrl_disp0_2;
pwm0 = &pwm5;
- reg_can_xcvr = &reg_can_xcvr;
+ reg-can-xcvr = &reg_can_xcvr;
serial2 = &uart5;
serial4 = &uart3;
spi0 = &ecspi2;
diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi
index 1241972b16ba..47a3453a4211 100644
--- a/arch/arm/boot/dts/imx6ul.dtsi
+++ b/arch/arm/boot/dts/imx6ul.dtsi
@@ -1,10 +1,6 @@
-/*
- * Copyright 2015 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2015 Freescale Semiconductor, Inc.
#include <dt-bindings/clock/imx6ul-clock.h>
#include <dt-bindings/gpio/gpio.h>
@@ -551,11 +547,8 @@
interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- reg_3p0: regulator-3p0@20c8110 {
- reg = <0x20c8110>;
+ reg_3p0: regulator-3p0 {
compatible = "fsl,anatop-regulator";
regulator-name = "vdd3p0";
regulator-min-microvolt = <2625000>;
@@ -569,8 +562,7 @@
anatop-enable-bit = <0>;
};
- reg_arm: regulator-vddcore@20c8140 {
- reg = <0x20c8140>;
+ reg_arm: regulator-vddcore {
compatible = "fsl,anatop-regulator";
regulator-name = "cpu";
regulator-min-microvolt = <725000>;
@@ -587,8 +579,7 @@
anatop-max-voltage = <1450000>;
};
- reg_soc: regulator-vddsoc@20c8140 {
- reg = <0x20c8140>;
+ reg_soc: regulator-vddsoc {
compatible = "fsl,anatop-regulator";
regulator-name = "vddsoc";
regulator-min-microvolt = <725000>;
@@ -769,6 +760,36 @@
reg = <0x02100000 0x100000>;
ranges;
+ crypto: caam@2140000 {
+ compatible = "fsl,imx6ul-caam", "fsl,sec-v4.0";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x2140000 0x3c000>;
+ ranges = <0 0x2140000 0x3c000>;
+ interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6UL_CLK_CAAM_IPG>, <&clks IMX6UL_CLK_CAAM_ACLK>,
+ <&clks IMX6UL_CLK_CAAM_MEM>;
+ clock-names = "ipg", "aclk", "mem";
+
+ sec_jr0: jr0@1000 {
+ compatible = "fsl,sec-v4.0-job-ring";
+ reg = <0x1000 0x1000>;
+ interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ sec_jr1: jr1@2000 {
+ compatible = "fsl,sec-v4.0-job-ring";
+ reg = <0x2000 0x1000>;
+ interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ sec_jr2: jr2@3000 {
+ compatible = "fsl,sec-v4.0-job-ring";
+ reg = <0x3000 0x1000>;
+ interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
usbotg1: usb@2184000 {
compatible = "fsl,imx6ul-usb", "fsl,imx27-usb";
reg = <0x02184000 0x200>;
diff --git a/arch/arm/boot/dts/imx6ull-pinfunc.h b/arch/arm/boot/dts/imx6ull-pinfunc.h
index 118202336691..fdc46bb09cc1 100644
--- a/arch/arm/boot/dts/imx6ull-pinfunc.h
+++ b/arch/arm/boot/dts/imx6ull-pinfunc.h
@@ -14,6 +14,14 @@
* The pin function ID is a tuple of
* <mux_reg conf_reg input_reg mux_mode input_val>
*/
+#define MX6ULL_PAD_UART1_TX_DATA__UART5_DTE_RX 0x0084 0x0310 0x0644 0x9 0x4
+#define MX6ULL_PAD_UART1_RX_DATA__UART5_DCE_RX 0x0088 0x0314 0x0644 0x9 0x5
+#define MX6ULL_PAD_UART1_CTS_B__UART5_DCE_RTS 0x008C 0x0318 0x0640 0x9 0x3
+#define MX6ULL_PAD_UART1_RTS_B__UART5_DTE_RTS 0x0090 0x031C 0x0640 0x9 0x4
+#define MX6ULL_PAD_UART5_TX_DATA__UART5_DTE_RX 0x00BC 0x0348 0x0644 0x0 0x6
+#define MX6ULL_PAD_UART5_RX_DATA__UART5_DCE_RX 0x00C0 0x034C 0x0644 0x0 0x7
+#define MX6ULL_PAD_ENET1_RX_EN__UART5_DCE_RTS 0x00CC 0x0358 0x0640 0x1 0x5
+#define MX6ULL_PAD_ENET1_TX_DATA0__UART5_DTE_RTS 0x00D0 0x035C 0x0640 0x1 0x6
#define MX6ULL_PAD_ENET2_RX_DATA0__EPDC_SDDO08 0x00E4 0x0370 0x0000 0x9 0x0
#define MX6ULL_PAD_ENET2_RX_DATA1__EPDC_SDDO09 0x00E8 0x0374 0x0000 0x9 0x0
#define MX6ULL_PAD_ENET2_RX_EN__EPDC_SDDO10 0x00EC 0x0378 0x0000 0x9 0x0
@@ -47,6 +55,7 @@
#define MX6ULL_PAD_CSI_DATA00__ESAI_TX_HF_CLK 0x01E4 0x0470 0x0000 0x9 0x0
#define MX6ULL_PAD_CSI_DATA01__ESAI_RX_HF_CLK 0x01E8 0x0474 0x0000 0x9 0x0
#define MX6ULL_PAD_CSI_DATA02__ESAI_RX_FS 0x01EC 0x0478 0x0000 0x9 0x0
+#define MX6ULL_PAD_CSI_DATA02__UART5_DCE_RTS 0x01EC 0x0478 0x0640 0x8 0x7
#define MX6ULL_PAD_CSI_DATA03__ESAI_RX_CLK 0x01F0 0x047C 0x0000 0x9 0x0
#define MX6ULL_PAD_CSI_DATA04__ESAI_TX_FS 0x01F4 0x0480 0x0000 0x9 0x0
#define MX6ULL_PAD_CSI_DATA05__ESAI_TX_CLK 0x01F8 0x0484 0x0000 0x9 0x0
diff --git a/arch/arm/boot/dts/imx6ull.dtsi b/arch/arm/boot/dts/imx6ull.dtsi
index 571ddd71cdba..ebc25c98e5e1 100644
--- a/arch/arm/boot/dts/imx6ull.dtsi
+++ b/arch/arm/boot/dts/imx6ull.dtsi
@@ -45,6 +45,8 @@
/* Delete UART8 in AIPS-1 (i.MX6UL specific) */
/delete-node/ &uart8;
+/* Delete CAAM node in AIPS-2 (i.MX6UL specific) */
+/delete-node/ &crypto;
/ {
soc {
diff --git a/arch/arm/boot/dts/imx7d-cl-som-imx7.dts b/arch/arm/boot/dts/imx7d-cl-som-imx7.dts
index 7f645683f53b..8bf365d28cac 100644
--- a/arch/arm/boot/dts/imx7d-cl-som-imx7.dts
+++ b/arch/arm/boot/dts/imx7d-cl-som-imx7.dts
@@ -33,7 +33,7 @@
};
&cpu0 {
- arm-supply = <&sw1a_reg>;
+ cpu-supply = <&sw1a_reg>;
};
&fec1 {
diff --git a/arch/arm/boot/dts/imx7d-nitrogen7.dts b/arch/arm/boot/dts/imx7d-nitrogen7.dts
index 52167298984d..70c53e50b2fc 100644
--- a/arch/arm/boot/dts/imx7d-nitrogen7.dts
+++ b/arch/arm/boot/dts/imx7d-nitrogen7.dts
@@ -49,8 +49,8 @@
compatible = "boundary,imx7d-nitrogen7", "fsl,imx7d";
aliases {
- fb_lcd = &lcdif;
- t_lcd = &t_lcd;
+ fb-lcd = &lcdif;
+ t-lcd = &t_lcd;
};
memory@80000000 {
@@ -144,7 +144,7 @@
};
&cpu0 {
- arm-supply = <&sw1a_reg>;
+ cpu-supply = <&sw1a_reg>;
};
&fec1 {
diff --git a/arch/arm/boot/dts/imx7d-pinfunc.h b/arch/arm/boot/dts/imx7d-pinfunc.h
index f2493bc63da4..aa9dbead4b8b 100644
--- a/arch/arm/boot/dts/imx7d-pinfunc.h
+++ b/arch/arm/boot/dts/imx7d-pinfunc.h
@@ -592,7 +592,7 @@
#define MX7D_PAD_UART2_RX_DATA__UART2_DCE_RX 0x0130 0x03A0 0x06FC 0x0 0x2
#define MX7D_PAD_UART2_RX_DATA__UART2_DTE_TX 0x0130 0x03A0 0x0000 0x0 0x0
#define MX7D_PAD_UART2_RX_DATA__I2C2_SCL 0x0130 0x03A0 0x05DC 0x1 0x0
-#define MX7D_PAD_UART2_RX_DATA__SAI3_RX_BCLK 0x0130 0x03A0 0x0000 0x2 0x0
+#define MX7D_PAD_UART2_RX_DATA__SAI3_RX_BCLK 0x0130 0x03A0 0x06C4 0x2 0x0
#define MX7D_PAD_UART2_RX_DATA__ECSPI1_SS3 0x0130 0x03A0 0x0000 0x3 0x0
#define MX7D_PAD_UART2_RX_DATA__ENET2_1588_EVENT1_IN 0x0130 0x03A0 0x0000 0x4 0x0
#define MX7D_PAD_UART2_RX_DATA__GPIO4_IO2 0x0130 0x03A0 0x0000 0x5 0x0
@@ -1112,13 +1112,13 @@
#define MX7D_PAD_ENET1_RGMII_TD3__GPIO7_IO9 0x0250 0x04C0 0x0000 0x5 0x0
#define MX7D_PAD_ENET1_RGMII_TD3__CAAM_RNG_OSC_OBS 0x0250 0x04C0 0x0000 0x7 0x0
#define MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x0254 0x04C4 0x0000 0x0 0x0
-#define MX7D_PAD_ENET1_RGMII_TX_CTL__SAI1_RX_SYNC 0x0254 0x04C4 0x0000 0x2 0x0
+#define MX7D_PAD_ENET1_RGMII_TX_CTL__SAI1_RX_SYNC 0x0254 0x04C4 0x06A4 0x2 0x1
#define MX7D_PAD_ENET1_RGMII_TX_CTL__GPT2_COMPARE1 0x0254 0x04C4 0x0000 0x3 0x0
#define MX7D_PAD_ENET1_RGMII_TX_CTL__EPDC_PWR_CTRL2 0x0254 0x04C4 0x0000 0x4 0x0
#define MX7D_PAD_ENET1_RGMII_TX_CTL__GPIO7_IO10 0x0254 0x04C4 0x0000 0x5 0x0
#define MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC 0x0258 0x04C8 0x0000 0x0 0x0
#define MX7D_PAD_ENET1_RGMII_TXC__ENET1_TX_ER 0x0258 0x04C8 0x0000 0x1 0x0
-#define MX7D_PAD_ENET1_RGMII_TXC__SAI1_RX_BCLK 0x0258 0x04C8 0x0000 0x2 0x0
+#define MX7D_PAD_ENET1_RGMII_TXC__SAI1_RX_BCLK 0x0258 0x04C8 0x069C 0x2 0x1
#define MX7D_PAD_ENET1_RGMII_TXC__GPT2_COMPARE2 0x0258 0x04C8 0x0000 0x3 0x0
#define MX7D_PAD_ENET1_RGMII_TXC__EPDC_PWR_CTRL3 0x0258 0x04C8 0x0000 0x4 0x0
#define MX7D_PAD_ENET1_RGMII_TXC__GPIO7_IO11 0x0258 0x04C8 0x0000 0x5 0x0
diff --git a/arch/arm/boot/dts/imx7d-sdb-sht11.dts b/arch/arm/boot/dts/imx7d-sdb-sht11.dts
index 64a20ed1713a..996555596d40 100644
--- a/arch/arm/boot/dts/imx7d-sdb-sht11.dts
+++ b/arch/arm/boot/dts/imx7d-sdb-sht11.dts
@@ -1,44 +1,6 @@
-/*
- * Copyright (C) 2015 Freescale Semiconductor, Inc.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Copyright (C) 2015 Freescale Semiconductor, Inc.
#include "imx7d-sdb.dts"
diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts
index 5d6a08be397f..940849163104 100644
--- a/arch/arm/boot/dts/imx7d-sdb.dts
+++ b/arch/arm/boot/dts/imx7d-sdb.dts
@@ -1,44 +1,6 @@
-/*
- * Copyright (C) 2015 Freescale Semiconductor, Inc.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Copyright (C) 2015 Freescale Semiconductor, Inc.
/dts-v1/;
@@ -52,6 +14,24 @@
reg = <0x80000000 0x80000000>;
};
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_keys>;
+
+ volume-up {
+ label = "Volume Up";
+ gpios = <&gpio5 11 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ };
+
+ volume-down {
+ label = "Volume Down";
+ gpios = <&gpio5 10 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEDOWN>;
+ };
+ };
+
spi4 {
compatible = "spi-gpio";
pinctrl-names = "default";
@@ -161,7 +141,7 @@
};
&cpu0 {
- arm-supply = <&sw1a_reg>;
+ cpu-supply = <&sw1a_reg>;
};
&ecspi3 {
@@ -519,6 +499,12 @@
>;
};
+ pinctrl_gpio_keys: gpio_keysgrp {
+ fsl,pins = <
+ MX7D_PAD_SD2_RESET_B__GPIO5_IO11 0x59
+ MX7D_PAD_SD2_WP__GPIO5_IO10 0x59
+ >;
+ };
pinctrl_hog: hoggrp {
fsl,pins = <
diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi
index d74dd7f19507..8d3d123d0a5c 100644
--- a/arch/arm/boot/dts/imx7d.dtsi
+++ b/arch/arm/boot/dts/imx7d.dtsi
@@ -1,45 +1,7 @@
-/*
- * Copyright 2015 Freescale Semiconductor, Inc.
- * Copyright 2016 Toradex AG
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Copyright 2015 Freescale Semiconductor, Inc.
+// Copyright 2016 Toradex AG
#include "imx7s.dtsi"
#include <dt-bindings/reset/imx7-reset.h>
@@ -47,12 +9,8 @@
/ {
cpus {
cpu0: cpu@0 {
- operating-points = <
- /* KHz uV */
- 996000 1075000
- 792000 975000
- >;
clock-frequency = <996000000>;
+ operating-points-v2 = <&cpu0_opp_table>;
};
cpu1: cpu@1 {
@@ -60,6 +18,25 @@
device_type = "cpu";
reg = <1>;
clock-frequency = <996000000>;
+ operating-points-v2 = <&cpu0_opp_table>;
+ };
+ };
+
+ cpu0_opp_table: opp-table {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-792000000 {
+ opp-hz = /bits/ 64 <792000000>;
+ opp-microvolt = <975000>;
+ clock-latency-ns = <150000>;
+ };
+
+ opp-996000000 {
+ opp-hz = /bits/ 64 <996000000>;
+ opp-microvolt = <1075000>;
+ clock-latency-ns = <150000>;
+ opp-suspend;
};
};
diff --git a/arch/arm/boot/dts/imx7s-warp.dts b/arch/arm/boot/dts/imx7s-warp.dts
index 8a30b148534d..fa390da636de 100644
--- a/arch/arm/boot/dts/imx7s-warp.dts
+++ b/arch/arm/boot/dts/imx7s-warp.dts
@@ -113,10 +113,6 @@
assigned-clock-rates = <884736000>;
};
-&cpu0 {
- arm-supply = <&sw1a_reg>;
-};
-
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi
index 69436b9a404c..9ced589bfa96 100644
--- a/arch/arm/boot/dts/imx7s.dtsi
+++ b/arch/arm/boot/dts/imx7s.dtsi
@@ -1,45 +1,7 @@
-/*
- * Copyright 2015 Freescale Semiconductor, Inc.
- * Copyright 2016 Toradex AG
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Copyright 2015 Freescale Semiconductor, Inc.
+// Copyright 2016 Toradex AG
#include <dt-bindings/clock/imx7d-clock.h>
#include <dt-bindings/power/imx7-power.h>
@@ -173,6 +135,17 @@
};
};
+ tempmon: tempmon {
+ compatible = "fsl,imx7d-tempmon";
+ interrupt-parent = <&gpc>;
+ interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+ fsl,tempmon =<&anatop>;
+ nvmem-cells = <&tempmon_calib>,
+ <&tempmon_temp_grade>;
+ nvmem-cell-names = "calib", "temp_grade";
+ clocks = <&clks IMX7D_PLL_SYS_MAIN_CLK>;
+ };
+
timer {
compatible = "arm,armv7-timer";
interrupt-parent = <&intc>;
@@ -321,7 +294,7 @@
port {
tpiu_in_port: endpoint {
slave-mode;
- remote-endpoint = <&replicator_out_port1>;
+ remote-endpoint = <&replicator_out_port0>;
};
};
};
@@ -540,27 +513,14 @@
};
};
- tempmon: tempmon {
- compatible = "fsl,imx7d-tempmon";
- interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
- fsl,tempmon =<&anatop>;
- nvmem-cells = <&tempmon_calib>,
- <&tempmon_temp_grade>;
- nvmem-cell-names = "calib", "temp_grade";
- clocks = <&clks IMX7D_PLL_SYS_MAIN_CLK>;
- };
-
anatop: anatop@30360000 {
compatible = "fsl,imx7d-anatop", "fsl,imx6q-anatop",
"syscon", "simple-bus";
reg = <0x30360000 0x10000>;
interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- reg_1p0d: regulator-vdd1p0d@30360210 {
- reg = <0x30360210>;
+ reg_1p0d: regulator-vdd1p0d {
compatible = "fsl,anatop-regulator";
regulator-name = "vdd1p0d";
regulator-min-microvolt = <800000>;
@@ -573,6 +533,20 @@
anatop-max-voltage = <1200000>;
anatop-enable-bit = <0>;
};
+
+ reg_1p2: regulator-vdd1p2 {
+ compatible = "fsl,anatop-regulator";
+ regulator-name = "vdd1p2";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1300000>;
+ anatop-reg-offset = <0x220>;
+ anatop-vol-bit-shift = <8>;
+ anatop-vol-bit-width = <5>;
+ anatop-min-bit-val = <0x14>;
+ anatop-min-voltage = <1100000>;
+ anatop-max-voltage = <1300000>;
+ anatop-enable-bit = <0>;
+ };
};
snvs: snvs@30370000 {
diff --git a/arch/arm/boot/dts/keystone-k2g-evm.dts b/arch/arm/boot/dts/keystone-k2g-evm.dts
index 6a4657799b99..154fdd7a7022 100644
--- a/arch/arm/boot/dts/keystone-k2g-evm.dts
+++ b/arch/arm/boot/dts/keystone-k2g-evm.dts
@@ -114,6 +114,20 @@
K2G_CORE_IOPAD(0x11f0) (BUFFER_CLASS_B | PIN_PULLDOWN | MUX_MODE0) /* uart2_txd.uart2_txd */
>;
};
+
+ dcan0_pins: pinmux_dcan0_pins {
+ pinctrl-single,pins = <
+ K2G_CORE_IOPAD(0x11fc) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dcan0tx.dcan0tx */
+ K2G_CORE_IOPAD(0x1200) (BUFFER_CLASS_B | PIN_PULLDOWN | MUX_MODE0) /* dcan0rx.dcan0rx */
+ >;
+ };
+
+ dcan1_pins: pinmux_dcan1_pins {
+ pinctrl-single,pins = <
+ K2G_CORE_IOPAD(0x1224) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE1) /* qspicsn2.dcan1tx */
+ K2G_CORE_IOPAD(0x1228) (BUFFER_CLASS_B | PIN_PULLDOWN | MUX_MODE1) /* qspicsn3.dcan1rx */
+ >;
+ };
};
&uart0 {
@@ -268,3 +282,15 @@
pinctrl-0 = <&uart2_pins>;
status = "okay";
};
+
+&dcan0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&dcan0_pins>;
+ status = "okay";
+};
+
+&dcan1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&dcan1_pins>;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/logicpd-som-lv.dtsi b/arch/arm/boot/dts/logicpd-som-lv.dtsi
index 6fa7bba3e801..3bb28c03ca74 100644
--- a/arch/arm/boot/dts/logicpd-som-lv.dtsi
+++ b/arch/arm/boot/dts/logicpd-som-lv.dtsi
@@ -35,6 +35,13 @@
reset-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; /* gpio_4 */
#phy-cells = <0>;
};
+
+ /* fixed 26MHz oscillator */
+ hfclk_26m: oscillator {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <26000000>;
+ };
};
&gpmc {
@@ -79,6 +86,8 @@
reg = <0x48>;
interrupts = <7>; /* SYS_NIRQ cascaded to intc */
interrupt-parent = <&intc>;
+ clocks = <&hfclk_26m>;
+ clock-names = "fck";
twl_audio: audio {
compatible = "ti,twl4030-audio";
codec {
@@ -98,6 +107,25 @@
pinctrl-names = "default";
pinctrl-0 = <&i2c3_pins>;
clock-frequency = <400000>;
+
+ touchscreen: tsc2004@48 {
+ compatible = "ti,tsc2004";
+ reg = <0x48>;
+ vio-supply = <&vaux1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&tsc2004_pins>;
+ interrupts-extended = <&gpio5 25 IRQ_TYPE_EDGE_RISING>; /* gpio 153 */
+
+ touchscreen-fuzz-x = <4>;
+ touchscreen-fuzz-y = <7>;
+ touchscreen-fuzz-pressure = <2>;
+ touchscreen-size-x = <4096>;
+ touchscreen-size-y = <4096>;
+ touchscreen-max-pressure = <2048>;
+
+ ti,x-plate-ohms = <280>;
+ ti,esd-recovery-timeout-ms = <8000>;
+ };
};
&mmc3 {
@@ -203,6 +231,12 @@
OMAP3_CORE1_IOPAD(0x20ba, PIN_OUTPUT | MUX_MODE4) /* gpmc_ncs6.gpio_57 */
>;
};
+
+ tsc2004_pins: pinmux_tsc2004_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE4) /* mcbsp4_dr.gpio_153 */
+ >;
+ };
};
&omap3_pmx_wkup {
diff --git a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi
index 3e174e474d3d..7d2302e8706c 100644
--- a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi
+++ b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi
@@ -30,6 +30,13 @@
linux,default-trigger = "none";
};
};
+
+ /* fixed 26MHz oscillator */
+ hfclk_26m: oscillator {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <26000000>;
+ };
};
&gpmc {
@@ -74,6 +81,9 @@
reg = <0x48>;
interrupts = <7>; /* SYS_NIRQ cascaded to intc */
interrupt-parent = <&intc>;
+ clocks = <&hfclk_26m>;
+ clock-names = "fck";
+
twl_audio: audio {
compatible = "ti,twl4030-audio";
codec {
diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi
index dcc9292d2ffa..d77dcf890cfc 100644
--- a/arch/arm/boot/dts/meson8.dtsi
+++ b/arch/arm/boot/dts/meson8.dtsi
@@ -57,7 +57,7 @@
#address-cells = <1>;
#size-cells = <0>;
- cpu@200 {
+ cpu0: cpu@200 {
device_type = "cpu";
compatible = "arm,cortex-a9";
next-level-cache = <&L2>;
@@ -66,7 +66,7 @@
resets = <&clkc CLKC_RESET_CPU0_SOFT_RESET>;
};
- cpu@201 {
+ cpu1: cpu@201 {
device_type = "cpu";
compatible = "arm,cortex-a9";
next-level-cache = <&L2>;
@@ -75,7 +75,7 @@
resets = <&clkc CLKC_RESET_CPU1_SOFT_RESET>;
};
- cpu@202 {
+ cpu2: cpu@202 {
device_type = "cpu";
compatible = "arm,cortex-a9";
next-level-cache = <&L2>;
@@ -84,7 +84,7 @@
resets = <&clkc CLKC_RESET_CPU2_SOFT_RESET>;
};
- cpu@203 {
+ cpu3: cpu@203 {
device_type = "cpu";
compatible = "arm,cortex-a9";
next-level-cache = <&L2>;
@@ -94,6 +94,15 @@
};
};
+ pmu {
+ compatible = "arm,cortex-a9-pmu";
+ interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+ };
+
reserved-memory {
#address-cells = <1>;
#size-cells = <1>;
@@ -272,6 +281,22 @@
function = "pwm_e";
};
};
+
+ uart_a1_pins: uart-a1 {
+ mux {
+ groups = "uart_tx_a1",
+ "uart_rx_a1";
+ function = "uart_a";
+ };
+ };
+
+ uart_a1_cts_rts_pins: uart-a1-cts-rts {
+ mux {
+ groups = "uart_cts_a1",
+ "uart_rts_a1";
+ function = "uart_a";
+ };
+ };
};
};
diff --git a/arch/arm/boot/dts/meson8b-odroidc1.dts b/arch/arm/boot/dts/meson8b-odroidc1.dts
index 3a5603d95b70..ef3177d3da3d 100644
--- a/arch/arm/boot/dts/meson8b-odroidc1.dts
+++ b/arch/arm/boot/dts/meson8b-odroidc1.dts
@@ -103,10 +103,34 @@
};
};
-&uart_AO {
+&ethmac {
status = "okay";
- pinctrl-0 = <&uart_ao_a_pins>;
+
+ snps,reset-gpio = <&gpio GPIOH_4 GPIO_ACTIVE_HIGH>;
+ snps,reset-active-low;
+ snps,reset-delays-us = <0 10000 30000>;
+
+ pinctrl-0 = <&eth_rgmii_pins>;
pinctrl-names = "default";
+
+ phy-mode = "rgmii";
+ phy-handle = <&eth_phy>;
+ amlogic,tx-delay-ns = <4>;
+
+ mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* Realtek RTL8211F (0x001cc916) */
+ eth_phy: ethernet-phy@0 {
+ reg = <0>;
+ eee-broken-1000t;
+ interrupt-parent = <&gpio_intc>;
+ /* GPIOH_3 */
+ interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+ };
+ };
};
&gpio_ao {
@@ -124,12 +148,10 @@
};
};
-&usb1_phy {
- status = "okay";
-};
-
-&usb1 {
+&ir_receiver {
status = "okay";
+ pinctrl-0 = <&ir_recv_pins>;
+ pinctrl-names = "default";
};
&sdio {
@@ -158,32 +180,16 @@
};
};
-&ethmac {
+&uart_AO {
status = "okay";
-
- snps,reset-gpio = <&gpio GPIOH_4 GPIO_ACTIVE_HIGH>;
- snps,reset-active-low;
- snps,reset-delays-us = <0 10000 30000>;
-
- pinctrl-0 = <&eth_rgmii_pins>;
+ pinctrl-0 = <&uart_ao_a_pins>;
pinctrl-names = "default";
+};
- phy-mode = "rgmii";
- phy-handle = <&eth_phy>;
- amlogic,tx-delay-ns = <4>;
-
- mdio {
- compatible = "snps,dwmac-mdio";
- #address-cells = <1>;
- #size-cells = <0>;
+&usb1_phy {
+ status = "okay";
+};
- /* Realtek RTL8211F (0x001cc916) */
- eth_phy: ethernet-phy@0 {
- reg = <0>;
- eee-broken-1000t;
- interrupt-parent = <&gpio_intc>;
- /* GPIOH_3 */
- interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
- };
- };
+&usb1 {
+ status = "okay";
};
diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi
index 553b82174604..08f7f6be7254 100644
--- a/arch/arm/boot/dts/meson8b.dtsi
+++ b/arch/arm/boot/dts/meson8b.dtsi
@@ -55,7 +55,7 @@
#address-cells = <1>;
#size-cells = <0>;
- cpu@200 {
+ cpu0: cpu@200 {
device_type = "cpu";
compatible = "arm,cortex-a5";
next-level-cache = <&L2>;
@@ -64,7 +64,7 @@
resets = <&clkc CLKC_RESET_CPU0_SOFT_RESET>;
};
- cpu@201 {
+ cpu1: cpu@201 {
device_type = "cpu";
compatible = "arm,cortex-a5";
next-level-cache = <&L2>;
@@ -73,7 +73,7 @@
resets = <&clkc CLKC_RESET_CPU1_SOFT_RESET>;
};
- cpu@202 {
+ cpu2: cpu@202 {
device_type = "cpu";
compatible = "arm,cortex-a5";
next-level-cache = <&L2>;
@@ -82,7 +82,7 @@
resets = <&clkc CLKC_RESET_CPU2_SOFT_RESET>;
};
- cpu@203 {
+ cpu3: cpu@203 {
device_type = "cpu";
compatible = "arm,cortex-a5";
next-level-cache = <&L2>;
@@ -92,6 +92,15 @@
};
};
+ pmu {
+ compatible = "arm,cortex-a5-pmu";
+ interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+ };
+
reserved-memory {
#address-cells = <1>;
#size-cells = <1>;
@@ -139,6 +148,13 @@
function = "uart_ao";
};
};
+
+ ir_recv_pins: remote {
+ mux {
+ groups = "remote_input";
+ function = "remote";
+ };
+ };
};
};
diff --git a/arch/arm/boot/dts/meson8m2-mxiii-plus.dts b/arch/arm/boot/dts/meson8m2-mxiii-plus.dts
new file mode 100644
index 000000000000..f5853610b20b
--- /dev/null
+++ b/arch/arm/boot/dts/meson8m2-mxiii-plus.dts
@@ -0,0 +1,244 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 Oleg Ivanov <balbes-150@yandex.ru>
+ * Copyright (c) 2018 Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+ */
+
+/dts-v1/;
+
+#include "meson8m2.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Tronsmart MXIII Plus";
+ compatible = "tronsmart,mxiii-plus", "amlogic,meson8m2";
+
+ aliases {
+ ethernet0 = &ethmac;
+ i2c0 = &i2c_AO;
+ serial0 = &uart_AO;
+ serial1 = &uart_A;
+ mmc0 = &sd_card_slot;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory {
+ reg = <0x40000000 0x80000000>;
+ };
+
+ adc-keys {
+ compatible = "adc-keys";
+ io-channels = <&saradc 0>;
+ io-channel-names = "buttons";
+ keyup-threshold-microvolt = <1710000>;
+
+ button-function {
+ label = "Function";
+ linux,code = <KEY_FN>;
+ press-threshold-microvolt = <10000>;
+ };
+ };
+
+ vcc_3v3: regulator-vcc3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+};
+
+&cpu0 {
+ cpu-supply = <&vcck>;
+};
+
+&ethmac {
+ status = "okay";
+
+ pinctrl-0 = <&eth_rgmii_pins>;
+ pinctrl-names = "default";
+
+ phy-handle = <&eth_phy0>;
+ phy-mode = "rgmii";
+
+ amlogic,tx-delay-ns = <4>;
+
+ snps,reset-gpio = <&gpio GPIOH_4 0>;
+ snps,reset-delays-us = <0 10000 1000000>;
+ snps,reset-active-low;
+
+ mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eth_phy0: ethernet-phy@0 {
+ /* Realtek RTL8211F (0x001cc916) */
+ reg = <0>;
+ };
+ };
+};
+
+&ir_receiver {
+ status = "okay";
+ pinctrl-0 = <&ir_recv_pins>;
+ pinctrl-names = "default";
+};
+
+&i2c_AO {
+ status = "okay";
+ pinctrl-0 = <&i2c_ao_pins>;
+ pinctrl-names = "default";
+
+ pmic@32 {
+ compatible = "ricoh,rn5t618";
+ reg = <0x32>;
+ system-power-controller;
+
+ regulators {
+ vcck: DCDC1 {
+ regulator-name = "VCCK";
+ regulator-min-microvolt = <825000>;
+ regulator-max-microvolt = <1150000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ DCDC2 {
+ regulator-name = "VDDAO";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1150000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ DCDC3 {
+ regulator-name = "VDD_DDR";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ LDO1 {
+ regulator-name = "VDDIO_AO28";
+ regulator-min-microvolt = <2900000>;
+ regulator-max-microvolt = <2900000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vddio_ao1v8: LDO2 {
+ regulator-name = "VDDIO_AO18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ LDO3 {
+ regulator-name = "VCC1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ LDO4 {
+ regulator-name = "VCC2V8";
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ LDO5 {
+ regulator-name = "AVDD1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ LDORTC1 {
+ regulator-name = "VDD_LDO";
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <2700000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ LDORTC2 {
+ regulator-name = "RTC_0V9";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
+};
+
+&saradc {
+ status = "okay";
+ vref-supply = <&vddio_ao1v8>;
+};
+
+&sdio {
+ status = "okay";
+
+ pinctrl-0 = <&sd_b_pins>;
+ pinctrl-names = "default";
+
+ /* SD card */
+ sd_card_slot: slot@1 {
+ compatible = "mmc-slot";
+ reg = <1>;
+ status = "okay";
+
+ bus-width = <4>;
+ no-sdio;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ disable-wp;
+
+ cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
+ cd-inverted;
+
+ vmmc-supply = <&vcc_3v3>;
+ };
+};
+
+/* connected to the Bluetooth module */
+&uart_A {
+ status = "okay";
+ pinctrl-0 = <&uart_a1_pins>, <&uart_a1_cts_rts_pins>;
+ pinctrl-names = "default";
+ uart-has-rtscts;
+};
+
+&uart_AO {
+ status = "okay";
+ pinctrl-0 = <&uart_ao_a_pins>;
+ pinctrl-names = "default";
+};
+
+&usb0 {
+ status = "okay";
+};
+
+&usb1 {
+ status = "okay";
+};
+
+&usb0_phy {
+ status = "okay";
+};
+
+&usb1_phy {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/meson8m2.dtsi b/arch/arm/boot/dts/meson8m2.dtsi
new file mode 100644
index 000000000000..3e1f92273d7b
--- /dev/null
+++ b/arch/arm/boot/dts/meson8m2.dtsi
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Martin Blumenstingl <martin.blumenstingl@googlemail.com>.
+ */
+
+#include "meson8.dtsi"
+
+/ {
+ model = "Amlogic Meson8m2 SoC";
+ compatible = "amlogic,meson8m2";
+}; /* end of / */
+
+&clkc {
+ compatible = "amlogic,meson8m2-clkc", "amlogic,meson8-clkc";
+};
+
+&ethmac {
+ compatible = "amlogic,meson8m2-dwmac", "snps,dwmac";
+ reg = <0xc9410000 0x10000
+ 0xc1108140 0x8>;
+ clocks = <&clkc CLKID_ETH>,
+ <&clkc CLKID_MPLL2>,
+ <&clkc CLKID_MPLL2>;
+ clock-names = "stmmaceth", "clkin0", "clkin1";
+ resets = <&reset RESET_ETHERNET>;
+ reset-names = "stmmaceth";
+};
+
+&pinctrl_aobus {
+ compatible = "amlogic,meson8m2-aobus-pinctrl",
+ "amlogic,meson8-aobus-pinctrl";
+};
+
+&pinctrl_cbus {
+ compatible = "amlogic,meson8m2-cbus-pinctrl",
+ "amlogic,meson8-cbus-pinctrl";
+
+ eth_rgmii_pins: ethernet {
+ mux {
+ groups = "eth_tx_clk_50m", "eth_tx_en",
+ "eth_txd3", "eth_txd2",
+ "eth_txd1", "eth_txd0",
+ "eth_rx_clk_in", "eth_rx_dv",
+ "eth_rxd3", "eth_rxd2",
+ "eth_rxd1", "eth_rxd0",
+ "eth_mdio", "eth_mdc";
+ function = "ethernet";
+ };
+ };
+};
+
+&wdt {
+ compatible = "amlogic,meson8m2-wdt", "amlogic,meson8b-wdt";
+};
diff --git a/arch/arm/boot/dts/mt2701-evb.dts b/arch/arm/boot/dts/mt2701-evb.dts
index 63af4b13a36f..be0edb3dae6c 100644
--- a/arch/arm/boot/dts/mt2701-evb.dts
+++ b/arch/arm/boot/dts/mt2701-evb.dts
@@ -1,15 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (c) 2015 MediaTek Inc.
* Author: Erin Lo <erin.lo@mediatek.com>
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
*/
/dts-v1/;
diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi
index 05557fce0f1d..180377e56ef4 100644
--- a/arch/arm/boot/dts/mt2701.dtsi
+++ b/arch/arm/boot/dts/mt2701.dtsi
@@ -1,15 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (c) 2015 MediaTek Inc.
* Author: Erin.Lo <erin.lo@mediatek.com>
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
*/
#include <dt-bindings/clock/mt2701-clk.h>
@@ -426,104 +419,96 @@
status = "disabled";
};
- afe: audio-controller@11220000 {
- compatible = "mediatek,mt2701-audio";
- reg = <0 0x11220000 0 0x2000>,
- <0 0x112a0000 0 0x20000>;
- interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>,
- <GIC_SPI 132 IRQ_TYPE_LEVEL_LOW>;
- interrupt-names = "afe", "asys";
- power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>;
-
- clocks = <&infracfg CLK_INFRA_AUDIO>,
- <&topckgen CLK_TOP_AUD_MUX1_SEL>,
- <&topckgen CLK_TOP_AUD_MUX2_SEL>,
- <&topckgen CLK_TOP_AUD_MUX1_DIV>,
- <&topckgen CLK_TOP_AUD_MUX2_DIV>,
- <&topckgen CLK_TOP_AUD_48K_TIMING>,
- <&topckgen CLK_TOP_AUD_44K_TIMING>,
- <&topckgen CLK_TOP_AUDPLL_MUX_SEL>,
- <&topckgen CLK_TOP_APLL_SEL>,
- <&topckgen CLK_TOP_AUD1PLL_98M>,
- <&topckgen CLK_TOP_AUD2PLL_90M>,
- <&topckgen CLK_TOP_HADDS2PLL_98M>,
- <&topckgen CLK_TOP_HADDS2PLL_294M>,
- <&topckgen CLK_TOP_AUDPLL>,
- <&topckgen CLK_TOP_AUDPLL_D4>,
- <&topckgen CLK_TOP_AUDPLL_D8>,
- <&topckgen CLK_TOP_AUDPLL_D16>,
- <&topckgen CLK_TOP_AUDPLL_D24>,
- <&topckgen CLK_TOP_AUDINTBUS_SEL>,
- <&clk26m>,
- <&topckgen CLK_TOP_SYSPLL1_D4>,
- <&topckgen CLK_TOP_AUD_K1_SRC_SEL>,
- <&topckgen CLK_TOP_AUD_K2_SRC_SEL>,
- <&topckgen CLK_TOP_AUD_K3_SRC_SEL>,
- <&topckgen CLK_TOP_AUD_K4_SRC_SEL>,
- <&topckgen CLK_TOP_AUD_K5_SRC_SEL>,
- <&topckgen CLK_TOP_AUD_K6_SRC_SEL>,
- <&topckgen CLK_TOP_AUD_K1_SRC_DIV>,
- <&topckgen CLK_TOP_AUD_K2_SRC_DIV>,
- <&topckgen CLK_TOP_AUD_K3_SRC_DIV>,
- <&topckgen CLK_TOP_AUD_K4_SRC_DIV>,
- <&topckgen CLK_TOP_AUD_K5_SRC_DIV>,
- <&topckgen CLK_TOP_AUD_K6_SRC_DIV>,
- <&topckgen CLK_TOP_AUD_I2S1_MCLK>,
- <&topckgen CLK_TOP_AUD_I2S2_MCLK>,
- <&topckgen CLK_TOP_AUD_I2S3_MCLK>,
- <&topckgen CLK_TOP_AUD_I2S4_MCLK>,
- <&topckgen CLK_TOP_AUD_I2S5_MCLK>,
- <&topckgen CLK_TOP_AUD_I2S6_MCLK>,
- <&topckgen CLK_TOP_ASM_M_SEL>,
- <&topckgen CLK_TOP_ASM_H_SEL>,
- <&topckgen CLK_TOP_UNIVPLL2_D4>,
- <&topckgen CLK_TOP_UNIVPLL2_D2>,
- <&topckgen CLK_TOP_SYSPLL_D5>;
-
- clock-names = "infra_sys_audio_clk",
- "top_audio_mux1_sel",
- "top_audio_mux2_sel",
- "top_audio_mux1_div",
- "top_audio_mux2_div",
- "top_audio_48k_timing",
- "top_audio_44k_timing",
- "top_audpll_mux_sel",
- "top_apll_sel",
- "top_aud1_pll_98M",
- "top_aud2_pll_90M",
- "top_hadds2_pll_98M",
- "top_hadds2_pll_294M",
- "top_audpll",
- "top_audpll_d4",
- "top_audpll_d8",
- "top_audpll_d16",
- "top_audpll_d24",
- "top_audintbus_sel",
- "clk_26m",
- "top_syspll1_d4",
- "top_aud_k1_src_sel",
- "top_aud_k2_src_sel",
- "top_aud_k3_src_sel",
- "top_aud_k4_src_sel",
- "top_aud_k5_src_sel",
- "top_aud_k6_src_sel",
- "top_aud_k1_src_div",
- "top_aud_k2_src_div",
- "top_aud_k3_src_div",
- "top_aud_k4_src_div",
- "top_aud_k5_src_div",
- "top_aud_k6_src_div",
- "top_aud_i2s1_mclk",
- "top_aud_i2s2_mclk",
- "top_aud_i2s3_mclk",
- "top_aud_i2s4_mclk",
- "top_aud_i2s5_mclk",
- "top_aud_i2s6_mclk",
- "top_asm_m_sel",
- "top_asm_h_sel",
- "top_univpll2_d4",
- "top_univpll2_d2",
- "top_syspll_d5";
+ audsys: clock-controller@11220000 {
+ compatible = "mediatek,mt2701-audsys", "syscon";
+ reg = <0 0x11220000 0 0x2000>;
+ #clock-cells = <1>;
+
+ afe: audio-controller {
+ compatible = "mediatek,mt2701-audio";
+ interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 132 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-names = "afe", "asys";
+ power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>;
+
+ clocks = <&infracfg CLK_INFRA_AUDIO>,
+ <&topckgen CLK_TOP_AUD_MUX1_SEL>,
+ <&topckgen CLK_TOP_AUD_MUX2_SEL>,
+ <&topckgen CLK_TOP_AUD_48K_TIMING>,
+ <&topckgen CLK_TOP_AUD_44K_TIMING>,
+ <&topckgen CLK_TOP_AUD_K1_SRC_SEL>,
+ <&topckgen CLK_TOP_AUD_K2_SRC_SEL>,
+ <&topckgen CLK_TOP_AUD_K3_SRC_SEL>,
+ <&topckgen CLK_TOP_AUD_K4_SRC_SEL>,
+ <&topckgen CLK_TOP_AUD_K1_SRC_DIV>,
+ <&topckgen CLK_TOP_AUD_K2_SRC_DIV>,
+ <&topckgen CLK_TOP_AUD_K3_SRC_DIV>,
+ <&topckgen CLK_TOP_AUD_K4_SRC_DIV>,
+ <&topckgen CLK_TOP_AUD_I2S1_MCLK>,
+ <&topckgen CLK_TOP_AUD_I2S2_MCLK>,
+ <&topckgen CLK_TOP_AUD_I2S3_MCLK>,
+ <&topckgen CLK_TOP_AUD_I2S4_MCLK>,
+ <&audsys CLK_AUD_I2SO1>,
+ <&audsys CLK_AUD_I2SO2>,
+ <&audsys CLK_AUD_I2SO3>,
+ <&audsys CLK_AUD_I2SO4>,
+ <&audsys CLK_AUD_I2SIN1>,
+ <&audsys CLK_AUD_I2SIN2>,
+ <&audsys CLK_AUD_I2SIN3>,
+ <&audsys CLK_AUD_I2SIN4>,
+ <&audsys CLK_AUD_ASRCO1>,
+ <&audsys CLK_AUD_ASRCO2>,
+ <&audsys CLK_AUD_ASRCO3>,
+ <&audsys CLK_AUD_ASRCO4>,
+ <&audsys CLK_AUD_AFE>,
+ <&audsys CLK_AUD_AFE_CONN>,
+ <&audsys CLK_AUD_A1SYS>,
+ <&audsys CLK_AUD_A2SYS>,
+ <&audsys CLK_AUD_AFE_MRGIF>;
+
+ clock-names = "infra_sys_audio_clk",
+ "top_audio_mux1_sel",
+ "top_audio_mux2_sel",
+ "top_audio_a1sys_hp",
+ "top_audio_a2sys_hp",
+ "i2s0_src_sel",
+ "i2s1_src_sel",
+ "i2s2_src_sel",
+ "i2s3_src_sel",
+ "i2s0_src_div",
+ "i2s1_src_div",
+ "i2s2_src_div",
+ "i2s3_src_div",
+ "i2s0_mclk_en",
+ "i2s1_mclk_en",
+ "i2s2_mclk_en",
+ "i2s3_mclk_en",
+ "i2so0_hop_ck",
+ "i2so1_hop_ck",
+ "i2so2_hop_ck",
+ "i2so3_hop_ck",
+ "i2si0_hop_ck",
+ "i2si1_hop_ck",
+ "i2si2_hop_ck",
+ "i2si3_hop_ck",
+ "asrc0_out_ck",
+ "asrc1_out_ck",
+ "asrc2_out_ck",
+ "asrc3_out_ck",
+ "audio_afe_pd",
+ "audio_afe_conn_pd",
+ "audio_a1sys_pd",
+ "audio_a2sys_pd",
+ "audio_mrgif_pd";
+
+ assigned-clocks = <&topckgen CLK_TOP_AUD_MUX1_SEL>,
+ <&topckgen CLK_TOP_AUD_MUX2_SEL>,
+ <&topckgen CLK_TOP_AUD_MUX1_DIV>,
+ <&topckgen CLK_TOP_AUD_MUX2_DIV>;
+ assigned-clock-parents = <&topckgen CLK_TOP_AUD1PLL_98M>,
+ <&topckgen CLK_TOP_AUD2PLL_90M>;
+ assigned-clock-rates = <0>, <0>, <49152000>, <45158400>;
+ };
};
mmsys: syscon@14000000 {
diff --git a/arch/arm/boot/dts/mt6323.dtsi b/arch/arm/boot/dts/mt6323.dtsi
index 7c783d6c750e..ba397407c1dd 100644
--- a/arch/arm/boot/dts/mt6323.dtsi
+++ b/arch/arm/boot/dts/mt6323.dtsi
@@ -1,15 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
/*
- * Copyright (c) 2017 MediaTek Inc.
+ * Copyright (c) 2017-2018 MediaTek Inc.
* Author: John Crispin <john@phrozen.org>
* Sean Wang <sean.wang@mediatek.com>
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
*/
&pwrap {
@@ -20,6 +14,13 @@
interrupt-controller;
#interrupt-cells = <2>;
+ mt6323_leds: leds {
+ compatible = "mediatek,mt6323-led";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
mt6323regulator: mt6323regulator{
compatible = "mediatek,mt6323-regulator";
diff --git a/arch/arm/boot/dts/mt6580-evbp1.dts b/arch/arm/boot/dts/mt6580-evbp1.dts
index 17daeae6bbe8..ca137897ed60 100644
--- a/arch/arm/boot/dts/mt6580-evbp1.dts
+++ b/arch/arm/boot/dts/mt6580-evbp1.dts
@@ -1,15 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (c) 2015 MediaTek Inc.
* Author: Mars.C <mars.cheng@mediatek.com>
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
*/
/dts-v1/;
diff --git a/arch/arm/boot/dts/mt6580.dtsi b/arch/arm/boot/dts/mt6580.dtsi
index a349dba5ff79..2bdc5ed12fca 100644
--- a/arch/arm/boot/dts/mt6580.dtsi
+++ b/arch/arm/boot/dts/mt6580.dtsi
@@ -1,15 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (c) 2015 MediaTek Inc.
* Author: Mars.C <mars.cheng@mediatek.com>
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
*/
#include <dt-bindings/interrupt-controller/irq.h>
diff --git a/arch/arm/boot/dts/mt6589-aquaris5.dts b/arch/arm/boot/dts/mt6589-aquaris5.dts
index 594a6f3bebda..7bbaa1279a26 100644
--- a/arch/arm/boot/dts/mt6589-aquaris5.dts
+++ b/arch/arm/boot/dts/mt6589-aquaris5.dts
@@ -1,16 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (c) 2014 MundoReader S.L.
* Author: Matthias Brugger <matthias.bgg@gmail.com>
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
*/
/dts-v1/;
diff --git a/arch/arm/boot/dts/mt6589.dtsi b/arch/arm/boot/dts/mt6589.dtsi
index 41df742d7891..28df8495686a 100644
--- a/arch/arm/boot/dts/mt6589.dtsi
+++ b/arch/arm/boot/dts/mt6589.dtsi
@@ -1,17 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (c) 2014 MundoReader S.L.
* Author: Matthias Brugger <matthias.bgg@gmail.com>
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
+*/
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
diff --git a/arch/arm/boot/dts/mt6592-evb.dts b/arch/arm/boot/dts/mt6592-evb.dts
index b57237e6394a..02849f6548e3 100644
--- a/arch/arm/boot/dts/mt6592-evb.dts
+++ b/arch/arm/boot/dts/mt6592-evb.dts
@@ -1,15 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (c) 2014 MediaTek Inc.
* Author: Howard Chen <ibanezchen@gmail.com>
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
*/
/dts-v1/;
diff --git a/arch/arm/boot/dts/mt6592.dtsi b/arch/arm/boot/dts/mt6592.dtsi
index c69201ffff72..8696ac891d60 100644
--- a/arch/arm/boot/dts/mt6592.dtsi
+++ b/arch/arm/boot/dts/mt6592.dtsi
@@ -1,15 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (c) 2014 MediaTek Inc.
* Author: Howard Chen <ibanezchen@gmail.com>
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
*/
#include <dt-bindings/interrupt-controller/irq.h>
diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index e10c03496524..d1eb123bc73b 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -1,16 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
/*
- * Copyright (c) 2017 MediaTek Inc.
+ * Copyright (c) 2017-2018 MediaTek Inc.
* Author: John Crispin <john@phrozen.org>
* Sean Wang <sean.wang@mediatek.com>
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
*/
#include <dt-bindings/interrupt-controller/irq.h>
@@ -22,11 +15,12 @@
#include <dt-bindings/phy/phy.h>
#include <dt-bindings/reset/mt2701-resets.h>
#include <dt-bindings/thermal/thermal.h>
-#include "skeleton64.dtsi"
/ {
compatible = "mediatek,mt7623";
interrupt-parent = <&sysirq>;
+ #address-cells = <2>;
+ #size-cells = <2>;
cpu_opp_table: opp-table {
compatible = "operating-points-v2";
@@ -130,14 +124,14 @@
#clock-cells = <0>;
};
- rtc32k: oscillator@1 {
+ rtc32k: oscillator-1 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <32000>;
clock-output-names = "rtc32k";
};
- clk26m: oscillator@0 {
+ clk26m: oscillator-0 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <26000000>;
@@ -492,6 +486,18 @@
nvmem-cell-names = "calibration-data";
};
+ btif: serial@1100c000 {
+ compatible = "mediatek,mt7623-btif",
+ "mediatek,mtk-btif";
+ reg = <0 0x1100c000 0 0x1000>;
+ interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&pericfg CLK_PERI_BTIF>;
+ clock-names = "main";
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
nandc: nfi@1100d000 {
compatible = "mediatek,mt7623-nfc",
"mediatek,mt2701-nfc";
@@ -517,6 +523,18 @@
status = "disabled";
};
+ nor_flash: spi@11014000 {
+ compatible = "mediatek,mt7623-nor",
+ "mediatek,mt8173-nor";
+ reg = <0 0x11014000 0 0x1000>;
+ clocks = <&pericfg CLK_PERI_FLASH>,
+ <&topckgen CLK_TOP_FLASH_SEL>;
+ clock-names = "spi", "sf";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
spi1: spi@11016000 {
compatible = "mediatek,mt7623-spi",
"mediatek,mt2701-spi";
@@ -545,105 +563,99 @@
status = "disabled";
};
- afe: audio-controller@11220000 {
- compatible = "mediatek,mt7623-audio",
- "mediatek,mt2701-audio";
- reg = <0 0x11220000 0 0x2000>,
- <0 0x112a0000 0 0x20000>;
- interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>,
- <GIC_SPI 132 IRQ_TYPE_LEVEL_LOW>;
- interrupt-names = "afe", "asys";
- power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>;
+ audsys: clock-controller@11220000 {
+ compatible = "mediatek,mt7623-audsys",
+ "mediatek,mt2701-audsys",
+ "syscon";
+ reg = <0 0x11220000 0 0x2000>;
+ #clock-cells = <1>;
- clocks = <&infracfg CLK_INFRA_AUDIO>,
- <&topckgen CLK_TOP_AUD_MUX1_SEL>,
- <&topckgen CLK_TOP_AUD_MUX2_SEL>,
- <&topckgen CLK_TOP_AUD_MUX1_DIV>,
- <&topckgen CLK_TOP_AUD_MUX2_DIV>,
- <&topckgen CLK_TOP_AUD_48K_TIMING>,
- <&topckgen CLK_TOP_AUD_44K_TIMING>,
- <&topckgen CLK_TOP_AUDPLL_MUX_SEL>,
- <&topckgen CLK_TOP_APLL_SEL>,
- <&topckgen CLK_TOP_AUD1PLL_98M>,
- <&topckgen CLK_TOP_AUD2PLL_90M>,
- <&topckgen CLK_TOP_HADDS2PLL_98M>,
- <&topckgen CLK_TOP_HADDS2PLL_294M>,
- <&topckgen CLK_TOP_AUDPLL>,
- <&topckgen CLK_TOP_AUDPLL_D4>,
- <&topckgen CLK_TOP_AUDPLL_D8>,
- <&topckgen CLK_TOP_AUDPLL_D16>,
- <&topckgen CLK_TOP_AUDPLL_D24>,
- <&topckgen CLK_TOP_AUDINTBUS_SEL>,
- <&clk26m>,
- <&topckgen CLK_TOP_SYSPLL1_D4>,
- <&topckgen CLK_TOP_AUD_K1_SRC_SEL>,
- <&topckgen CLK_TOP_AUD_K2_SRC_SEL>,
- <&topckgen CLK_TOP_AUD_K3_SRC_SEL>,
- <&topckgen CLK_TOP_AUD_K4_SRC_SEL>,
- <&topckgen CLK_TOP_AUD_K5_SRC_SEL>,
- <&topckgen CLK_TOP_AUD_K6_SRC_SEL>,
- <&topckgen CLK_TOP_AUD_K1_SRC_DIV>,
- <&topckgen CLK_TOP_AUD_K2_SRC_DIV>,
- <&topckgen CLK_TOP_AUD_K3_SRC_DIV>,
- <&topckgen CLK_TOP_AUD_K4_SRC_DIV>,
- <&topckgen CLK_TOP_AUD_K5_SRC_DIV>,
- <&topckgen CLK_TOP_AUD_K6_SRC_DIV>,
- <&topckgen CLK_TOP_AUD_I2S1_MCLK>,
- <&topckgen CLK_TOP_AUD_I2S2_MCLK>,
- <&topckgen CLK_TOP_AUD_I2S3_MCLK>,
- <&topckgen CLK_TOP_AUD_I2S4_MCLK>,
- <&topckgen CLK_TOP_AUD_I2S5_MCLK>,
- <&topckgen CLK_TOP_AUD_I2S6_MCLK>,
- <&topckgen CLK_TOP_ASM_M_SEL>,
- <&topckgen CLK_TOP_ASM_H_SEL>,
- <&topckgen CLK_TOP_UNIVPLL2_D4>,
- <&topckgen CLK_TOP_UNIVPLL2_D2>,
- <&topckgen CLK_TOP_SYSPLL_D5>;
-
- clock-names = "infra_sys_audio_clk",
- "top_audio_mux1_sel",
- "top_audio_mux2_sel",
- "top_audio_mux1_div",
- "top_audio_mux2_div",
- "top_audio_48k_timing",
- "top_audio_44k_timing",
- "top_audpll_mux_sel",
- "top_apll_sel",
- "top_aud1_pll_98M",
- "top_aud2_pll_90M",
- "top_hadds2_pll_98M",
- "top_hadds2_pll_294M",
- "top_audpll",
- "top_audpll_d4",
- "top_audpll_d8",
- "top_audpll_d16",
- "top_audpll_d24",
- "top_audintbus_sel",
- "clk_26m",
- "top_syspll1_d4",
- "top_aud_k1_src_sel",
- "top_aud_k2_src_sel",
- "top_aud_k3_src_sel",
- "top_aud_k4_src_sel",
- "top_aud_k5_src_sel",
- "top_aud_k6_src_sel",
- "top_aud_k1_src_div",
- "top_aud_k2_src_div",
- "top_aud_k3_src_div",
- "top_aud_k4_src_div",
- "top_aud_k5_src_div",
- "top_aud_k6_src_div",
- "top_aud_i2s1_mclk",
- "top_aud_i2s2_mclk",
- "top_aud_i2s3_mclk",
- "top_aud_i2s4_mclk",
- "top_aud_i2s5_mclk",
- "top_aud_i2s6_mclk",
- "top_asm_m_sel",
- "top_asm_h_sel",
- "top_univpll2_d4",
- "top_univpll2_d2",
- "top_syspll_d5";
+ afe: audio-controller {
+ compatible = "mediatek,mt7623-audio",
+ "mediatek,mt2701-audio";
+ interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 132 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-names = "afe", "asys";
+ power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>;
+
+ clocks = <&infracfg CLK_INFRA_AUDIO>,
+ <&topckgen CLK_TOP_AUD_MUX1_SEL>,
+ <&topckgen CLK_TOP_AUD_MUX2_SEL>,
+ <&topckgen CLK_TOP_AUD_48K_TIMING>,
+ <&topckgen CLK_TOP_AUD_44K_TIMING>,
+ <&topckgen CLK_TOP_AUD_K1_SRC_SEL>,
+ <&topckgen CLK_TOP_AUD_K2_SRC_SEL>,
+ <&topckgen CLK_TOP_AUD_K3_SRC_SEL>,
+ <&topckgen CLK_TOP_AUD_K4_SRC_SEL>,
+ <&topckgen CLK_TOP_AUD_K1_SRC_DIV>,
+ <&topckgen CLK_TOP_AUD_K2_SRC_DIV>,
+ <&topckgen CLK_TOP_AUD_K3_SRC_DIV>,
+ <&topckgen CLK_TOP_AUD_K4_SRC_DIV>,
+ <&topckgen CLK_TOP_AUD_I2S1_MCLK>,
+ <&topckgen CLK_TOP_AUD_I2S2_MCLK>,
+ <&topckgen CLK_TOP_AUD_I2S3_MCLK>,
+ <&topckgen CLK_TOP_AUD_I2S4_MCLK>,
+ <&audsys CLK_AUD_I2SO1>,
+ <&audsys CLK_AUD_I2SO2>,
+ <&audsys CLK_AUD_I2SO3>,
+ <&audsys CLK_AUD_I2SO4>,
+ <&audsys CLK_AUD_I2SIN1>,
+ <&audsys CLK_AUD_I2SIN2>,
+ <&audsys CLK_AUD_I2SIN3>,
+ <&audsys CLK_AUD_I2SIN4>,
+ <&audsys CLK_AUD_ASRCO1>,
+ <&audsys CLK_AUD_ASRCO2>,
+ <&audsys CLK_AUD_ASRCO3>,
+ <&audsys CLK_AUD_ASRCO4>,
+ <&audsys CLK_AUD_AFE>,
+ <&audsys CLK_AUD_AFE_CONN>,
+ <&audsys CLK_AUD_A1SYS>,
+ <&audsys CLK_AUD_A2SYS>,
+ <&audsys CLK_AUD_AFE_MRGIF>;
+
+ clock-names = "infra_sys_audio_clk",
+ "top_audio_mux1_sel",
+ "top_audio_mux2_sel",
+ "top_audio_a1sys_hp",
+ "top_audio_a2sys_hp",
+ "i2s0_src_sel",
+ "i2s1_src_sel",
+ "i2s2_src_sel",
+ "i2s3_src_sel",
+ "i2s0_src_div",
+ "i2s1_src_div",
+ "i2s2_src_div",
+ "i2s3_src_div",
+ "i2s0_mclk_en",
+ "i2s1_mclk_en",
+ "i2s2_mclk_en",
+ "i2s3_mclk_en",
+ "i2so0_hop_ck",
+ "i2so1_hop_ck",
+ "i2so2_hop_ck",
+ "i2so3_hop_ck",
+ "i2si0_hop_ck",
+ "i2si1_hop_ck",
+ "i2si2_hop_ck",
+ "i2si3_hop_ck",
+ "asrc0_out_ck",
+ "asrc1_out_ck",
+ "asrc2_out_ck",
+ "asrc3_out_ck",
+ "audio_afe_pd",
+ "audio_afe_conn_pd",
+ "audio_a1sys_pd",
+ "audio_a2sys_pd",
+ "audio_mrgif_pd";
+
+ assigned-clocks = <&topckgen CLK_TOP_AUD_MUX1_SEL>,
+ <&topckgen CLK_TOP_AUD_MUX2_SEL>,
+ <&topckgen CLK_TOP_AUD_MUX1_DIV>,
+ <&topckgen CLK_TOP_AUD_MUX2_DIV>;
+ assigned-clock-parents = <&topckgen CLK_TOP_AUD1PLL_98M>,
+ <&topckgen CLK_TOP_AUD2PLL_90M>;
+ assigned-clock-rates = <0>, <0>, <49152000>, <45158400>;
+ };
};
mmc0: mmc@11230000 {
@@ -873,6 +885,16 @@
#reset-cells = <1>;
};
+ hsdma: dma-controller@1b007000 {
+ compatible = "mediatek,mt7623-hsdma";
+ reg = <0 0x1b007000 0 0x1000>;
+ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&ethsys CLK_ETHSYS_HSDMA>;
+ clock-names = "hsdma";
+ power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>;
+ #dma-cells = <1>;
+ };
+
eth: ethernet@1b100000 {
compatible = "mediatek,mt7623-eth",
"mediatek,mt2701-eth",
@@ -913,3 +935,298 @@
status = "disabled";
};
};
+
+&pio {
+ cir_pins_a:cir-default {
+ pins-cir {
+ pinmux = <MT7623_PIN_46_IR_FUNC_IR>;
+ bias-disable;
+ };
+ };
+
+ i2c0_pins_a: i2c0-default {
+ pins-i2c0 {
+ pinmux = <MT7623_PIN_75_SDA0_FUNC_SDA0>,
+ <MT7623_PIN_76_SCL0_FUNC_SCL0>;
+ bias-disable;
+ };
+ };
+
+ i2c1_pins_a: i2c1-default {
+ pin-i2c1 {
+ pinmux = <MT7623_PIN_57_SDA1_FUNC_SDA1>,
+ <MT7623_PIN_58_SCL1_FUNC_SCL1>;
+ bias-disable;
+ };
+ };
+
+ i2c1_pins_b: i2c1-alt {
+ pin-i2c1 {
+ pinmux = <MT7623_PIN_242_URTS2_FUNC_SCL1>,
+ <MT7623_PIN_243_UCTS2_FUNC_SDA1>;
+ bias-disable;
+ };
+ };
+
+ i2c2_pins_a: i2c2-default {
+ pin-i2c2 {
+ pinmux = <MT7623_PIN_77_SDA2_FUNC_SDA2>,
+ <MT7623_PIN_78_SCL2_FUNC_SCL2>;
+ bias-disable;
+ };
+ };
+
+ i2c2_pins_b: i2c2-alt {
+ pin-i2c2 {
+ pinmux = <MT7623_PIN_122_GPIO122_FUNC_SDA2>,
+ <MT7623_PIN_123_HTPLG_FUNC_SCL2>;
+ bias-disable;
+ };
+ };
+
+ i2s0_pins_a: i2s0-default {
+ pin-i2s0 {
+ pinmux = <MT7623_PIN_49_I2S0_DATA_FUNC_I2S0_DATA>,
+ <MT7623_PIN_72_I2S0_DATA_IN_FUNC_I2S0_DATA_IN>,
+ <MT7623_PIN_73_I2S0_LRCK_FUNC_I2S0_LRCK>,
+ <MT7623_PIN_74_I2S0_BCK_FUNC_I2S0_BCK>,
+ <MT7623_PIN_126_I2S0_MCLK_FUNC_I2S0_MCLK>;
+ drive-strength = <MTK_DRIVE_12mA>;
+ bias-pull-down;
+ };
+ };
+
+ i2s1_pins_a: i2s1-default {
+ pin-i2s1 {
+ pinmux = <MT7623_PIN_33_I2S1_DATA_FUNC_I2S1_DATA>,
+ <MT7623_PIN_34_I2S1_DATA_IN_FUNC_I2S1_DATA_IN>,
+ <MT7623_PIN_35_I2S1_BCK_FUNC_I2S1_BCK>,
+ <MT7623_PIN_36_I2S1_LRCK_FUNC_I2S1_LRCK>,
+ <MT7623_PIN_37_I2S1_MCLK_FUNC_I2S1_MCLK>;
+ drive-strength = <MTK_DRIVE_12mA>;
+ bias-pull-down;
+ };
+ };
+
+ key_pins_a: keys-alt {
+ pins-keys {
+ pinmux = <MT7623_PIN_256_GPIO256_FUNC_GPIO256>,
+ <MT7623_PIN_257_GPIO257_FUNC_GPIO257> ;
+ input-enable;
+ };
+ };
+
+ led_pins_a: leds-alt {
+ pins-leds {
+ pinmux = <MT7623_PIN_239_EXT_SDIO0_FUNC_GPIO239>,
+ <MT7623_PIN_240_EXT_XCS_FUNC_GPIO240>,
+ <MT7623_PIN_241_EXT_SCK_FUNC_GPIO241>;
+ };
+ };
+
+ mmc0_pins_default: mmc0default {
+ pins-cmd-dat {
+ pinmux = <MT7623_PIN_111_MSDC0_DAT7_FUNC_MSDC0_DAT7>,
+ <MT7623_PIN_112_MSDC0_DAT6_FUNC_MSDC0_DAT6>,
+ <MT7623_PIN_113_MSDC0_DAT5_FUNC_MSDC0_DAT5>,
+ <MT7623_PIN_114_MSDC0_DAT4_FUNC_MSDC0_DAT4>,
+ <MT7623_PIN_118_MSDC0_DAT3_FUNC_MSDC0_DAT3>,
+ <MT7623_PIN_119_MSDC0_DAT2_FUNC_MSDC0_DAT2>,
+ <MT7623_PIN_120_MSDC0_DAT1_FUNC_MSDC0_DAT1>,
+ <MT7623_PIN_121_MSDC0_DAT0_FUNC_MSDC0_DAT0>,
+ <MT7623_PIN_116_MSDC0_CMD_FUNC_MSDC0_CMD>;
+ input-enable;
+ bias-pull-up;
+ };
+
+ pins-clk {
+ pinmux = <MT7623_PIN_117_MSDC0_CLK_FUNC_MSDC0_CLK>;
+ bias-pull-down;
+ };
+
+ pins-rst {
+ pinmux = <MT7623_PIN_115_MSDC0_RSTB_FUNC_MSDC0_RSTB>;
+ bias-pull-up;
+ };
+ };
+
+ mmc0_pins_uhs: mmc0 {
+ pins-cmd-dat {
+ pinmux = <MT7623_PIN_111_MSDC0_DAT7_FUNC_MSDC0_DAT7>,
+ <MT7623_PIN_112_MSDC0_DAT6_FUNC_MSDC0_DAT6>,
+ <MT7623_PIN_113_MSDC0_DAT5_FUNC_MSDC0_DAT5>,
+ <MT7623_PIN_114_MSDC0_DAT4_FUNC_MSDC0_DAT4>,
+ <MT7623_PIN_118_MSDC0_DAT3_FUNC_MSDC0_DAT3>,
+ <MT7623_PIN_119_MSDC0_DAT2_FUNC_MSDC0_DAT2>,
+ <MT7623_PIN_120_MSDC0_DAT1_FUNC_MSDC0_DAT1>,
+ <MT7623_PIN_121_MSDC0_DAT0_FUNC_MSDC0_DAT0>,
+ <MT7623_PIN_116_MSDC0_CMD_FUNC_MSDC0_CMD>;
+ input-enable;
+ drive-strength = <MTK_DRIVE_2mA>;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+ };
+
+ pins-clk {
+ pinmux = <MT7623_PIN_117_MSDC0_CLK_FUNC_MSDC0_CLK>;
+ drive-strength = <MTK_DRIVE_2mA>;
+ bias-pull-down = <MTK_PUPD_SET_R1R0_01>;
+ };
+
+ pins-rst {
+ pinmux = <MT7623_PIN_115_MSDC0_RSTB_FUNC_MSDC0_RSTB>;
+ bias-pull-up;
+ };
+ };
+
+ mmc1_pins_default: mmc1default {
+ pins-cmd-dat {
+ pinmux = <MT7623_PIN_107_MSDC1_DAT0_FUNC_MSDC1_DAT0>,
+ <MT7623_PIN_108_MSDC1_DAT1_FUNC_MSDC1_DAT1>,
+ <MT7623_PIN_109_MSDC1_DAT2_FUNC_MSDC1_DAT2>,
+ <MT7623_PIN_110_MSDC1_DAT3_FUNC_MSDC1_DAT3>,
+ <MT7623_PIN_105_MSDC1_CMD_FUNC_MSDC1_CMD>;
+ input-enable;
+ drive-strength = <MTK_DRIVE_4mA>;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
+ };
+
+ pins-clk {
+ pinmux = <MT7623_PIN_106_MSDC1_CLK_FUNC_MSDC1_CLK>;
+ bias-pull-down;
+ drive-strength = <MTK_DRIVE_4mA>;
+ };
+
+ pins-wp {
+ pinmux = <MT7623_PIN_29_EINT7_FUNC_MSDC1_WP>;
+ input-enable;
+ bias-pull-up;
+ };
+
+ pins-insert {
+ pinmux = <MT7623_PIN_261_MSDC1_INS_FUNC_GPIO261>;
+ bias-pull-up;
+ };
+ };
+
+ mmc1_pins_uhs: mmc1 {
+ pins-cmd-dat {
+ pinmux = <MT7623_PIN_107_MSDC1_DAT0_FUNC_MSDC1_DAT0>,
+ <MT7623_PIN_108_MSDC1_DAT1_FUNC_MSDC1_DAT1>,
+ <MT7623_PIN_109_MSDC1_DAT2_FUNC_MSDC1_DAT2>,
+ <MT7623_PIN_110_MSDC1_DAT3_FUNC_MSDC1_DAT3>,
+ <MT7623_PIN_105_MSDC1_CMD_FUNC_MSDC1_CMD>;
+ input-enable;
+ drive-strength = <MTK_DRIVE_4mA>;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
+ };
+
+ pins-clk {
+ pinmux = <MT7623_PIN_106_MSDC1_CLK_FUNC_MSDC1_CLK>;
+ drive-strength = <MTK_DRIVE_4mA>;
+ bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+ };
+ };
+
+ nand_pins_default: nanddefault {
+ pins-ale {
+ pinmux = <MT7623_PIN_116_MSDC0_CMD_FUNC_NALE>;
+ drive-strength = <MTK_DRIVE_8mA>;
+ bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+ };
+
+ pins-dat {
+ pinmux = <MT7623_PIN_111_MSDC0_DAT7_FUNC_NLD7>,
+ <MT7623_PIN_112_MSDC0_DAT6_FUNC_NLD6>,
+ <MT7623_PIN_114_MSDC0_DAT4_FUNC_NLD4>,
+ <MT7623_PIN_118_MSDC0_DAT3_FUNC_NLD3>,
+ <MT7623_PIN_121_MSDC0_DAT0_FUNC_NLD0>,
+ <MT7623_PIN_120_MSDC0_DAT1_FUNC_NLD1>,
+ <MT7623_PIN_113_MSDC0_DAT5_FUNC_NLD5>,
+ <MT7623_PIN_115_MSDC0_RSTB_FUNC_NLD8>,
+ <MT7623_PIN_119_MSDC0_DAT2_FUNC_NLD2>;
+ input-enable;
+ drive-strength = <MTK_DRIVE_8mA>;
+ bias-pull-up;
+ };
+
+ pins-we {
+ pinmux = <MT7623_PIN_117_MSDC0_CLK_FUNC_NWEB>;
+ drive-strength = <MTK_DRIVE_8mA>;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
+ };
+ };
+
+ pcie_default: pcie_pin_default {
+ pins_cmd_dat {
+ pinmux = <MT7623_PIN_208_AUD_EXT_CK1_FUNC_PCIE0_PERST_N>,
+ <MT7623_PIN_209_AUD_EXT_CK2_FUNC_PCIE1_PERST_N>;
+ bias-disable;
+ };
+ };
+
+ pwm_pins_a: pwm-default {
+ pins-pwm {
+ pinmux = <MT7623_PIN_203_PWM0_FUNC_PWM0>,
+ <MT7623_PIN_204_PWM1_FUNC_PWM1>,
+ <MT7623_PIN_205_PWM2_FUNC_PWM2>,
+ <MT7623_PIN_206_PWM3_FUNC_PWM3>,
+ <MT7623_PIN_207_PWM4_FUNC_PWM4>;
+ };
+ };
+
+ spi0_pins_a: spi0-default {
+ pins-spi {
+ pinmux = <MT7623_PIN_53_SPI0_CSN_FUNC_SPI0_CS>,
+ <MT7623_PIN_54_SPI0_CK_FUNC_SPI0_CK>,
+ <MT7623_PIN_55_SPI0_MI_FUNC_SPI0_MI>,
+ <MT7623_PIN_56_SPI0_MO_FUNC_SPI0_MO>;
+ bias-disable;
+ };
+ };
+
+ spi1_pins_a: spi1-default {
+ pins-spi {
+ pinmux = <MT7623_PIN_7_SPI1_CSN_FUNC_SPI1_CS>,
+ <MT7623_PIN_199_SPI1_CK_FUNC_SPI1_CK>,
+ <MT7623_PIN_8_SPI1_MI_FUNC_SPI1_MI>,
+ <MT7623_PIN_9_SPI1_MO_FUNC_SPI1_MO>;
+ };
+ };
+
+ spi2_pins_a: spi2-default {
+ pins-spi {
+ pinmux = <MT7623_PIN_101_SPI2_CSN_FUNC_SPI2_CS>,
+ <MT7623_PIN_104_SPI2_CK_FUNC_SPI2_CK>,
+ <MT7623_PIN_102_SPI2_MI_FUNC_SPI2_MI>,
+ <MT7623_PIN_103_SPI2_MO_FUNC_SPI2_MO>;
+ };
+ };
+
+ uart0_pins_a: uart0-default {
+ pins-dat {
+ pinmux = <MT7623_PIN_79_URXD0_FUNC_URXD0>,
+ <MT7623_PIN_80_UTXD0_FUNC_UTXD0>;
+ };
+ };
+
+ uart1_pins_a: uart1-default {
+ pins-dat {
+ pinmux = <MT7623_PIN_81_URXD1_FUNC_URXD1>,
+ <MT7623_PIN_82_UTXD1_FUNC_UTXD1>;
+ };
+ };
+
+ uart2_pins_a: uart2-default {
+ pins-dat {
+ pinmux = <MT7623_PIN_14_GPIO14_FUNC_URXD2>,
+ <MT7623_PIN_15_GPIO15_FUNC_UTXD2>;
+ };
+ };
+
+ uart2_pins_b: uart2-alt {
+ pins-dat {
+ pinmux = <MT7623_PIN_200_URXD2_FUNC_URXD2>,
+ <MT7623_PIN_201_UTXD2_FUNC_UTXD2>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/mt7623a-rfb-emmc.dts b/arch/arm/boot/dts/mt7623a-rfb-emmc.dts
new file mode 100644
index 000000000000..13c86936d1c8
--- /dev/null
+++ b/arch/arm/boot/dts/mt7623a-rfb-emmc.dts
@@ -0,0 +1,291 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2017-2018 MediaTek Inc.
+ * Author: Sean Wang <sean.wang@mediatek.com>
+ *
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include "mt7623a.dtsi"
+#include "mt6323.dtsi"
+
+/ {
+ model = "MediaTek MT7623A with eMMC reference board";
+ compatible = "mediatek,mt7623a-rfb-emmc", "mediatek,mt7623";
+
+ aliases {
+ serial2 = &uart2;
+ };
+
+ chosen {
+ stdout-path = "serial2:115200n8";
+ };
+
+ cpus {
+ cpu@0 {
+ proc-supply = <&mt6323_vproc_reg>;
+ };
+
+ cpu@1 {
+ proc-supply = <&mt6323_vproc_reg>;
+ };
+
+ cpu@2 {
+ proc-supply = <&mt6323_vproc_reg>;
+ };
+
+ cpu@3 {
+ proc-supply = <&mt6323_vproc_reg>;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&key_pins_a>;
+
+ factory {
+ label = "factory";
+ linux,code = <BTN_0>;
+ gpios = <&pio 256 GPIO_ACTIVE_LOW>;
+ };
+
+ wps {
+ label = "wps";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&pio 257 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0 0x80000000 0 0x20000000>;
+ };
+
+ reg_1p8v: regulator-1p8v {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_3p3v: regulator-3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_5v: regulator-5v {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-5V";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sound {
+ compatible = "mediatek,mt2701-wm8960-machine";
+ mediatek,platform = <&afe>;
+ audio-routing =
+ "Headphone", "HP_L",
+ "Headphone", "HP_R",
+ "LINPUT1", "AMIC",
+ "RINPUT1", "AMIC";
+ mediatek,audio-codec = <&wm8960>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s0_pins_a>;
+ };
+};
+
+&btif {
+ status = "okay";
+};
+
+&crypto {
+ status = "okay";
+};
+
+&eth {
+ status = "okay";
+
+ gmac0: mac@0 {
+ compatible = "mediatek,eth-mac";
+ reg = <0>;
+ phy-mode = "trgmii";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ pause;
+ };
+ };
+
+ mdio-bus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ switch@0 {
+ compatible = "mediatek,mt7530";
+ reg = <0>;
+ mediatek,mcm;
+ resets = <&ethsys MT2701_ETHSYS_MCM_RST>;
+ reset-names = "mcm";
+ core-supply = <&mt6323_vpa_reg>;
+ io-supply = <&mt6323_vemc3v3_reg>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ label = "lan0";
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan1";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan2";
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan3";
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "wan";
+ };
+
+ port@6 {
+ reg = <6>;
+ label = "cpu";
+ ethernet = <&gmac0>;
+ phy-mode = "trgmii";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ };
+ };
+ };
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_b>;
+ status = "okay";
+
+ wm8960: wm8960@1a {
+ compatible = "wlf,wm8960";
+ reg = <0x1a>;
+ };
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins_b>;
+ status = "okay";
+};
+
+&mmc0 {
+ pinctrl-names = "default", "state_uhs";
+ pinctrl-0 = <&mmc0_pins_default>;
+ pinctrl-1 = <&mmc0_pins_uhs>;
+ status = "okay";
+ bus-width = <8>;
+ max-frequency = <50000000>;
+ cap-mmc-highspeed;
+ vmmc-supply = <&reg_3p3v>;
+ vqmmc-supply = <&reg_1p8v>;
+ non-removable;
+};
+
+&mmc1 {
+ pinctrl-names = "default", "state_uhs";
+ pinctrl-0 = <&mmc1_pins_default>;
+ pinctrl-1 = <&mmc1_pins_uhs>;
+ status = "okay";
+ bus-width = <4>;
+ max-frequency = <50000000>;
+ cap-sd-highspeed;
+ cd-gpios = <&pio 261 GPIO_ACTIVE_LOW>;
+ vmmc-supply = <&reg_3p3v>;
+ vqmmc-supply = <&reg_3p3v>;
+};
+
+&pcie {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie_default>;
+ status = "okay";
+
+ pcie@0,0 {
+ status = "okay";
+ };
+
+ pcie@1,0 {
+ status = "okay";
+ };
+};
+
+&pcie0_phy {
+ status = "okay";
+};
+
+&pcie1_phy {
+ status = "okay";
+};
+
+&pwm {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm_pins_a>;
+ status = "okay";
+};
+
+&spi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_pins_a>;
+ status = "okay";
+};
+
+&spi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi1_pins_a>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins_b>;
+ status = "okay";
+};
+
+&usb1 {
+ vusb33-supply = <&reg_3p3v>;
+ vbus-supply = <&reg_5v>;
+ status = "okay";
+};
+
+&u3phy1 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/mt7623a-rfb-nand.dts b/arch/arm/boot/dts/mt7623a-rfb-nand.dts
new file mode 100644
index 000000000000..88d8f0b2f4c2
--- /dev/null
+++ b/arch/arm/boot/dts/mt7623a-rfb-nand.dts
@@ -0,0 +1,337 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2017-2018 MediaTek Inc.
+ * Author: Sean Wang <sean.wang@mediatek.com>
+ *
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include "mt7623a.dtsi"
+#include "mt6323.dtsi"
+
+/ {
+ model = "MediaTek MT7623A with NAND reference board";
+ compatible = "mediatek,mt7623a-rfb-nand", "mediatek,mt7623";
+
+ aliases {
+ serial2 = &uart2;
+ };
+
+ chosen {
+ stdout-path = "serial2:115200n8";
+ };
+
+ cpus {
+ cpu@0 {
+ proc-supply = <&mt6323_vproc_reg>;
+ };
+
+ cpu@1 {
+ proc-supply = <&mt6323_vproc_reg>;
+ };
+
+ cpu@2 {
+ proc-supply = <&mt6323_vproc_reg>;
+ };
+
+ cpu@3 {
+ proc-supply = <&mt6323_vproc_reg>;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&key_pins_a>;
+
+ factory {
+ label = "factory";
+ linux,code = <BTN_0>;
+ gpios = <&pio 256 GPIO_ACTIVE_LOW>;
+ };
+
+ wps {
+ label = "wps";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&pio 257 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0 0x80000000 0 0x20000000>;
+ };
+
+ reg_1p8v: regulator-1p8v {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_3p3v: regulator-3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_5v: regulator-5v {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-5V";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sound {
+ compatible = "mediatek,mt2701-wm8960-machine";
+ mediatek,platform = <&afe>;
+ audio-routing =
+ "Headphone", "HP_L",
+ "Headphone", "HP_R",
+ "LINPUT1", "AMIC",
+ "RINPUT1", "AMIC";
+ mediatek,audio-codec = <&wm8960>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s0_pins_a>;
+ };
+};
+
+&bch {
+ status = "okay";
+};
+
+&btif {
+ status = "okay";
+};
+
+&crypto {
+ status = "okay";
+};
+
+&eth {
+ status = "okay";
+
+ gmac0: mac@0 {
+ compatible = "mediatek,eth-mac";
+ reg = <0>;
+ phy-mode = "trgmii";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ pause;
+ };
+ };
+
+ mdio-bus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ switch@0 {
+ compatible = "mediatek,mt7530";
+ reg = <0>;
+ mediatek,mcm;
+ resets = <&ethsys MT2701_ETHSYS_MCM_RST>;
+ reset-names = "mcm";
+ core-supply = <&mt6323_vpa_reg>;
+ io-supply = <&mt6323_vemc3v3_reg>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ label = "lan0";
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan1";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan2";
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan3";
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "wan";
+ };
+
+ port@6 {
+ reg = <6>;
+ label = "cpu";
+ ethernet = <&gmac0>;
+ phy-mode = "trgmii";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ };
+ };
+ };
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_b>;
+ status = "okay";
+
+ wm8960: wm8960@1a {
+ compatible = "wlf,wm8960";
+ reg = <0x1a>;
+ };
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins_b>;
+ status = "okay";
+};
+
+&mmc1 {
+ pinctrl-names = "default", "state_uhs";
+ pinctrl-0 = <&mmc1_pins_default>;
+ pinctrl-1 = <&mmc1_pins_uhs>;
+ status = "okay";
+ bus-width = <4>;
+ max-frequency = <50000000>;
+ cap-sd-highspeed;
+ cd-gpios = <&pio 261 GPIO_ACTIVE_LOW>;
+ vmmc-supply = <&reg_3p3v>;
+ vqmmc-supply = <&reg_3p3v>;
+};
+
+&nandc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&nand_pins_default>;
+ status = "okay";
+
+ nand@0 {
+ reg = <0>;
+ spare_per_sector = <64>;
+ nand-ecc-mode = "hw";
+ nand-ecc-strength = <12>;
+ nand-ecc-step-size = <1024>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "preloader";
+ reg = <0x0 0x40000>;
+ };
+
+ partition@40000 {
+ label = "uboot";
+ reg = <0x40000 0x80000>;
+ };
+
+ partition@c0000 {
+ label = "uboot-env";
+ reg = <0xC0000 0x40000>;
+ };
+
+ partition@140000 {
+ label = "bootimg";
+ reg = <0x140000 0x2000000>;
+ };
+
+ partition@2140000 {
+ label = "recovery";
+ reg = <0x2140000 0x2000000>;
+ };
+
+ partition@4140000 {
+ label = "rootfs";
+ reg = <0x4140000 0x1000000>;
+ };
+
+ partition@5140000 {
+ label = "usrdata";
+ reg = <0x5140000 0x1000000>;
+ };
+ };
+ };
+};
+
+&pcie {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie_default>;
+ status = "okay";
+
+ pcie@0,0 {
+ status = "okay";
+ };
+
+ pcie@1,0 {
+ status = "okay";
+ };
+};
+
+&pcie0_phy {
+ status = "okay";
+};
+
+&pcie1_phy {
+ status = "okay";
+};
+
+&pwm {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm_pins_a>;
+ status = "okay";
+};
+
+&spi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_pins_a>;
+ status = "okay";
+};
+
+&spi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi1_pins_a>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins_b>;
+ status = "okay";
+};
+
+&usb1 {
+ vusb33-supply = <&reg_3p3v>;
+ vbus-supply = <&reg_5v>;
+ status = "okay";
+};
+
+&u3phy1 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/mt7623a.dtsi b/arch/arm/boot/dts/mt7623a.dtsi
new file mode 100644
index 000000000000..0735a1fb8ad9
--- /dev/null
+++ b/arch/arm/boot/dts/mt7623a.dtsi
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2017-2018 MediaTek Inc.
+ * Author: Sean Wang <sean.wang@mediatek.com>
+ *
+ */
+
+/dts-v1/;
+#include <dt-bindings/power/mt7623a-power.h>
+#include "mt7623.dtsi"
+
+&afe {
+ power-domains = <&scpsys MT7623A_POWER_DOMAIN_IFR_MSC>;
+};
+
+&crypto {
+ power-domains = <&scpsys MT7623A_POWER_DOMAIN_ETH>;
+};
+
+&eth {
+ power-domains = <&scpsys MT7623A_POWER_DOMAIN_ETH>;
+};
+
+&nandc {
+ power-domains = <&scpsys MT7623A_POWER_DOMAIN_IFR_MSC>;
+};
+
+&pcie {
+ power-domains = <&scpsys MT7623A_POWER_DOMAIN_HIF>;
+};
+
+&scpsys {
+ compatible = "mediatek,mt7623a-scpsys";
+ clocks = <&topckgen CLK_TOP_ETHIF_SEL>;
+ clock-names = "ethif";
+};
+
+&usb1 {
+ power-domains = <&scpsys MT7623A_POWER_DOMAIN_HIF>;
+};
+
+&usb2 {
+ power-domains = <&scpsys MT7623A_POWER_DOMAIN_HIF>;
+};
diff --git a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
index bbf56f855e46..531d905d924f 100644
--- a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
+++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
@@ -1,5 +1,5 @@
/*
- * Copyright 2017 Sean Wang <sean.wang@mediatek.com>
+ * Copyright 2017-2018 Sean Wang <sean.wang@mediatek.com>
*
* SPDX-License-Identifier: (GPL-2.0+ OR MIT)
*/
@@ -109,10 +109,15 @@
};
memory@80000000 {
- reg = <0 0x80000000 0 0x40000000>;
+ device_type = "memory";
+ reg = <0 0x80000000 0 0x80000000>;
};
};
+&btif {
+ status = "okay";
+};
+
&cir {
pinctrl-names = "default";
pinctrl-0 = <&cir_pins_a>;
@@ -144,8 +149,6 @@
switch@0 {
compatible = "mediatek,mt7530";
- #address-cells = <1>;
- #size-cells = <0>;
reg = <0>;
reset-gpios = <&pio 33 0>;
core-supply = <&mt6323_vpa_reg>;
@@ -154,7 +157,6 @@
ports {
#address-cells = <1>;
#size-cells = <0>;
- reg = <0>;
port@0 {
reg = <0>;
@@ -235,6 +237,28 @@
vqmmc-supply = <&reg_3p3v>;
};
+&mt6323_leds {
+ status = "okay";
+
+ led@0 {
+ reg = <0>;
+ label = "bpi-r2:isink:green";
+ default-state = "off";
+ };
+
+ led@1 {
+ reg = <1>;
+ label = "bpi-r2:isink:red";
+ default-state = "off";
+ };
+
+ led@2 {
+ reg = <2>;
+ label = "bpi-r2:isink:blue";
+ default-state = "off";
+ };
+};
+
&pcie {
pinctrl-names = "default";
pinctrl-0 = <&pcie_default>;
@@ -257,257 +281,12 @@
status = "okay";
};
-&pio {
- cir_pins_a:cir@0 {
- pins-cir {
- pinmux = <MT7623_PIN_46_IR_FUNC_IR>;
- bias-disable;
- };
- };
-
- i2c0_pins_a: i2c@0 {
- pins-i2c0 {
- pinmux = <MT7623_PIN_75_SDA0_FUNC_SDA0>,
- <MT7623_PIN_76_SCL0_FUNC_SCL0>;
- bias-disable;
- };
- };
-
- i2c1_pins_a: i2c@1 {
- pin-i2c1 {
- pinmux = <MT7623_PIN_57_SDA1_FUNC_SDA1>,
- <MT7623_PIN_58_SCL1_FUNC_SCL1>;
- bias-disable;
- };
- };
-
- i2s0_pins_a: i2s@0 {
- pin-i2s0 {
- pinmux = <MT7623_PIN_49_I2S0_DATA_FUNC_I2S0_DATA>,
- <MT7623_PIN_72_I2S0_DATA_IN_FUNC_I2S0_DATA_IN>,
- <MT7623_PIN_73_I2S0_LRCK_FUNC_I2S0_LRCK>,
- <MT7623_PIN_74_I2S0_BCK_FUNC_I2S0_BCK>,
- <MT7623_PIN_126_I2S0_MCLK_FUNC_I2S0_MCLK>;
- drive-strength = <MTK_DRIVE_12mA>;
- bias-pull-down;
- };
- };
-
- i2s1_pins_a: i2s@1 {
- pin-i2s1 {
- pinmux = <MT7623_PIN_33_I2S1_DATA_FUNC_I2S1_DATA>,
- <MT7623_PIN_34_I2S1_DATA_IN_FUNC_I2S1_DATA_IN>,
- <MT7623_PIN_35_I2S1_BCK_FUNC_I2S1_BCK>,
- <MT7623_PIN_36_I2S1_LRCK_FUNC_I2S1_LRCK>,
- <MT7623_PIN_37_I2S1_MCLK_FUNC_I2S1_MCLK>;
- drive-strength = <MTK_DRIVE_12mA>;
- bias-pull-down;
- };
- };
-
- key_pins_a: keys@0 {
- pins-keys {
- pinmux = <MT7623_PIN_256_GPIO256_FUNC_GPIO256>,
- <MT7623_PIN_257_GPIO257_FUNC_GPIO257> ;
- input-enable;
- };
- };
-
- led_pins_a: leds@0 {
- pins-leds {
- pinmux = <MT7623_PIN_239_EXT_SDIO0_FUNC_GPIO239>,
- <MT7623_PIN_240_EXT_XCS_FUNC_GPIO240>,
- <MT7623_PIN_241_EXT_SCK_FUNC_GPIO241>;
- };
- };
-
- mmc0_pins_default: mmc0default {
- pins-cmd-dat {
- pinmux = <MT7623_PIN_111_MSDC0_DAT7_FUNC_MSDC0_DAT7>,
- <MT7623_PIN_112_MSDC0_DAT6_FUNC_MSDC0_DAT6>,
- <MT7623_PIN_113_MSDC0_DAT5_FUNC_MSDC0_DAT5>,
- <MT7623_PIN_114_MSDC0_DAT4_FUNC_MSDC0_DAT4>,
- <MT7623_PIN_118_MSDC0_DAT3_FUNC_MSDC0_DAT3>,
- <MT7623_PIN_119_MSDC0_DAT2_FUNC_MSDC0_DAT2>,
- <MT7623_PIN_120_MSDC0_DAT1_FUNC_MSDC0_DAT1>,
- <MT7623_PIN_121_MSDC0_DAT0_FUNC_MSDC0_DAT0>,
- <MT7623_PIN_116_MSDC0_CMD_FUNC_MSDC0_CMD>;
- input-enable;
- bias-pull-up;
- };
-
- pins-clk {
- pinmux = <MT7623_PIN_117_MSDC0_CLK_FUNC_MSDC0_CLK>;
- bias-pull-down;
- };
-
- pins-rst {
- pinmux = <MT7623_PIN_115_MSDC0_RSTB_FUNC_MSDC0_RSTB>;
- bias-pull-up;
- };
- };
-
- mmc0_pins_uhs: mmc0 {
- pins-cmd-dat {
- pinmux = <MT7623_PIN_111_MSDC0_DAT7_FUNC_MSDC0_DAT7>,
- <MT7623_PIN_112_MSDC0_DAT6_FUNC_MSDC0_DAT6>,
- <MT7623_PIN_113_MSDC0_DAT5_FUNC_MSDC0_DAT5>,
- <MT7623_PIN_114_MSDC0_DAT4_FUNC_MSDC0_DAT4>,
- <MT7623_PIN_118_MSDC0_DAT3_FUNC_MSDC0_DAT3>,
- <MT7623_PIN_119_MSDC0_DAT2_FUNC_MSDC0_DAT2>,
- <MT7623_PIN_120_MSDC0_DAT1_FUNC_MSDC0_DAT1>,
- <MT7623_PIN_121_MSDC0_DAT0_FUNC_MSDC0_DAT0>,
- <MT7623_PIN_116_MSDC0_CMD_FUNC_MSDC0_CMD>;
- input-enable;
- drive-strength = <MTK_DRIVE_2mA>;
- bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
- };
-
- pins-clk {
- pinmux = <MT7623_PIN_117_MSDC0_CLK_FUNC_MSDC0_CLK>;
- drive-strength = <MTK_DRIVE_2mA>;
- bias-pull-down = <MTK_PUPD_SET_R1R0_01>;
- };
-
- pins-rst {
- pinmux = <MT7623_PIN_115_MSDC0_RSTB_FUNC_MSDC0_RSTB>;
- bias-pull-up;
- };
- };
-
- mmc1_pins_default: mmc1default {
- pins-cmd-dat {
- pinmux = <MT7623_PIN_107_MSDC1_DAT0_FUNC_MSDC1_DAT0>,
- <MT7623_PIN_108_MSDC1_DAT1_FUNC_MSDC1_DAT1>,
- <MT7623_PIN_109_MSDC1_DAT2_FUNC_MSDC1_DAT2>,
- <MT7623_PIN_110_MSDC1_DAT3_FUNC_MSDC1_DAT3>,
- <MT7623_PIN_105_MSDC1_CMD_FUNC_MSDC1_CMD>;
- input-enable;
- drive-strength = <MTK_DRIVE_4mA>;
- bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
- };
-
- pins-clk {
- pinmux = <MT7623_PIN_106_MSDC1_CLK_FUNC_MSDC1_CLK>;
- bias-pull-down;
- drive-strength = <MTK_DRIVE_4mA>;
- };
-
- pins-wp {
- pinmux = <MT7623_PIN_29_EINT7_FUNC_MSDC1_WP>;
- input-enable;
- bias-pull-up;
- };
-
- pins-insert {
- pinmux = <MT7623_PIN_261_MSDC1_INS_FUNC_GPIO261>;
- bias-pull-up;
- };
- };
-
- mmc1_pins_uhs: mmc1 {
- pins-cmd-dat {
- pinmux = <MT7623_PIN_107_MSDC1_DAT0_FUNC_MSDC1_DAT0>,
- <MT7623_PIN_108_MSDC1_DAT1_FUNC_MSDC1_DAT1>,
- <MT7623_PIN_109_MSDC1_DAT2_FUNC_MSDC1_DAT2>,
- <MT7623_PIN_110_MSDC1_DAT3_FUNC_MSDC1_DAT3>,
- <MT7623_PIN_105_MSDC1_CMD_FUNC_MSDC1_CMD>;
- input-enable;
- drive-strength = <MTK_DRIVE_4mA>;
- bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
- };
-
- pins-clk {
- pinmux = <MT7623_PIN_106_MSDC1_CLK_FUNC_MSDC1_CLK>;
- drive-strength = <MTK_DRIVE_4mA>;
- bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
- };
- };
-
- pcie_default: pcie_pin_default {
- pins_cmd_dat {
- pinmux = <MT7623_PIN_208_AUD_EXT_CK1_FUNC_PCIE0_PERST_N>,
- <MT7623_PIN_209_AUD_EXT_CK2_FUNC_PCIE1_PERST_N>;
- bias-disable;
- };
- };
-
- pwm_pins_a: pwm@0 {
- pins-pwm {
- pinmux = <MT7623_PIN_203_PWM0_FUNC_PWM0>,
- <MT7623_PIN_204_PWM1_FUNC_PWM1>,
- <MT7623_PIN_205_PWM2_FUNC_PWM2>,
- <MT7623_PIN_206_PWM3_FUNC_PWM3>,
- <MT7623_PIN_207_PWM4_FUNC_PWM4>;
- };
- };
-
- spi0_pins_a: spi@0 {
- pins-spi {
- pinmux = <MT7623_PIN_53_SPI0_CSN_FUNC_SPI0_CS>,
- <MT7623_PIN_54_SPI0_CK_FUNC_SPI0_CK>,
- <MT7623_PIN_55_SPI0_MI_FUNC_SPI0_MI>,
- <MT7623_PIN_56_SPI0_MO_FUNC_SPI0_MO>;
- bias-disable;
- };
- };
-
- uart0_pins_a: uart@0 {
- pins-dat {
- pinmux = <MT7623_PIN_79_URXD0_FUNC_URXD0>,
- <MT7623_PIN_80_UTXD0_FUNC_UTXD0>;
- };
- };
-
- uart1_pins_a: uart@1 {
- pins-dat {
- pinmux = <MT7623_PIN_81_URXD1_FUNC_URXD1>,
- <MT7623_PIN_82_UTXD1_FUNC_UTXD1>;
- };
- };
-
- uart2_pins_a: uart@2 {
- pins-dat {
- pinmux = <MT7623_PIN_14_GPIO14_FUNC_URXD2>,
- <MT7623_PIN_15_GPIO15_FUNC_UTXD2>;
- };
- };
-};
-
&pwm {
pinctrl-names = "default";
pinctrl-0 = <&pwm_pins_a>;
status = "okay";
};
-&pwrap {
- mt6323 {
- mt6323led: led {
- compatible = "mediatek,mt6323-led";
- #address-cells = <1>;
- #size-cells = <0>;
-
- led@0 {
- reg = <0>;
- label = "bpi-r2:isink:green";
- default-state = "off";
- };
-
- led@1 {
- reg = <1>;
- label = "bpi-r2:isink:red";
- default-state = "off";
- };
-
- led@2 {
- reg = <2>;
- label = "bpi-r2:isink:blue";
- default-state = "off";
- };
- };
- };
-};
-
&spi0 {
pinctrl-names = "default";
pinctrl-0 = <&spi0_pins_a>;
diff --git a/arch/arm/boot/dts/mt7623n-rfb-emmc.dts b/arch/arm/boot/dts/mt7623n-rfb-emmc.dts
new file mode 100644
index 000000000000..b7606130ade9
--- /dev/null
+++ b/arch/arm/boot/dts/mt7623n-rfb-emmc.dts
@@ -0,0 +1,326 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2017-2018 MediaTek Inc.
+ * Author: Sean Wang <sean.wang@mediatek.com>
+ *
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include "mt7623.dtsi"
+#include "mt6323.dtsi"
+
+/ {
+ model = "MediaTek MT7623N with eMMC reference board";
+ compatible = "mediatek,mt7623n-rfb-emmc", "mediatek,mt7623";
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ };
+
+ chosen {
+ stdout-path = "serial2:115200n8";
+ };
+
+ cpus {
+ cpu@0 {
+ proc-supply = <&mt6323_vproc_reg>;
+ };
+
+ cpu@1 {
+ proc-supply = <&mt6323_vproc_reg>;
+ };
+
+ cpu@2 {
+ proc-supply = <&mt6323_vproc_reg>;
+ };
+
+ cpu@3 {
+ proc-supply = <&mt6323_vproc_reg>;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&key_pins_a>;
+
+ factory {
+ label = "factory";
+ linux,code = <BTN_0>;
+ gpios = <&pio 256 GPIO_ACTIVE_LOW>;
+ };
+
+ wps {
+ label = "wps";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&pio 257 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0 0x80000000 0 0x40000000>;
+ };
+
+ reg_1p8v: regulator-1p8v {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_3p3v: regulator-3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_5v: regulator-5v {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-5V";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sound {
+ compatible = "mediatek,mt2701-wm8960-machine";
+ mediatek,platform = <&afe>;
+ audio-routing =
+ "Headphone", "HP_L",
+ "Headphone", "HP_R",
+ "LINPUT1", "AMIC",
+ "RINPUT1", "AMIC";
+ mediatek,audio-codec = <&wm8960>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s0_pins_a>;
+ };
+};
+
+&btif {
+ status = "okay";
+};
+
+&cir {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cir_pins_a>;
+ status = "okay";
+};
+
+&crypto {
+ status = "okay";
+};
+
+&eth {
+ status = "okay";
+
+ gmac0: mac@0 {
+ compatible = "mediatek,eth-mac";
+ reg = <0>;
+ phy-mode = "trgmii";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ pause;
+ };
+ };
+
+ mac@1 {
+ compatible = "mediatek,eth-mac";
+ reg = <1>;
+ phy-handle = <&phy5>;
+ };
+
+ mdio-bus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy5: ethernet-phy@5 {
+ reg = <5>;
+ phy-mode = "rgmii-rxid";
+ };
+
+ switch@0 {
+ compatible = "mediatek,mt7530";
+ reg = <0>;
+ reset-gpios = <&pio 33 0>;
+ core-supply = <&mt6323_vpa_reg>;
+ io-supply = <&mt6323_vemc3v3_reg>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ label = "lan0";
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan1";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan2";
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan3";
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "wan";
+ };
+
+ port@6 {
+ reg = <6>;
+ label = "cpu";
+ ethernet = <&gmac0>;
+ phy-mode = "trgmii";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ };
+ };
+ };
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_b>;
+ status = "okay";
+
+ wm8960: wm8960@1a {
+ compatible = "wlf,wm8960";
+ reg = <0x1a>;
+ };
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins_a>;
+ status = "okay";
+};
+
+&mmc0 {
+ pinctrl-names = "default", "state_uhs";
+ pinctrl-0 = <&mmc0_pins_default>;
+ pinctrl-1 = <&mmc0_pins_uhs>;
+ status = "okay";
+ bus-width = <8>;
+ max-frequency = <50000000>;
+ cap-mmc-highspeed;
+ vmmc-supply = <&reg_3p3v>;
+ vqmmc-supply = <&reg_1p8v>;
+ non-removable;
+};
+
+&mmc1 {
+ pinctrl-names = "default", "state_uhs";
+ pinctrl-0 = <&mmc1_pins_default>;
+ pinctrl-1 = <&mmc1_pins_uhs>;
+ status = "okay";
+ bus-width = <4>;
+ max-frequency = <50000000>;
+ cap-sd-highspeed;
+ cd-gpios = <&pio 261 GPIO_ACTIVE_LOW>;
+ vmmc-supply = <&reg_3p3v>;
+ vqmmc-supply = <&reg_3p3v>;
+};
+
+&pcie {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie_default>;
+ status = "okay";
+
+ pcie@0,0 {
+ status = "okay";
+ };
+
+ pcie@1,0 {
+ status = "okay";
+ };
+};
+
+&pcie0_phy {
+ status = "okay";
+};
+
+&pcie1_phy {
+ status = "okay";
+};
+
+&pwm {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm_pins_a>;
+ status = "okay";
+};
+
+&spi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_pins_a>;
+ status = "okay";
+};
+
+&spi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi1_pins_a>;
+ status = "okay";
+};
+
+&spi2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi2_pins_a>;
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins_a>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins_a>;
+ status = "okay";
+};
+
+&usb1 {
+ vusb33-supply = <&reg_3p3v>;
+ vbus-supply = <&reg_5v>;
+ status = "okay";
+};
+
+&u3phy1 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/mt7623n-rfb-nand.dts b/arch/arm/boot/dts/mt7623n-rfb-nand.dts
index f729c718aba1..96ff3c9068ae 100644
--- a/arch/arm/boot/dts/mt7623n-rfb-nand.dts
+++ b/arch/arm/boot/dts/mt7623n-rfb-nand.dts
@@ -1,15 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (c) 2017 MediaTek Inc.
* Author: John Crispin <john@phrozen.org>
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
*/
/dts-v1/;
@@ -78,34 +71,3 @@
};
};
};
-
-&pio {
- nand_pins_default: nanddefault {
- pins-ale {
- pinmux = <MT7623_PIN_116_MSDC0_CMD_FUNC_NALE>;
- drive-strength = <MTK_DRIVE_8mA>;
- bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
- };
-
- pins-dat {
- pinmux = <MT7623_PIN_111_MSDC0_DAT7_FUNC_NLD7>,
- <MT7623_PIN_112_MSDC0_DAT6_FUNC_NLD6>,
- <MT7623_PIN_114_MSDC0_DAT4_FUNC_NLD4>,
- <MT7623_PIN_118_MSDC0_DAT3_FUNC_NLD3>,
- <MT7623_PIN_121_MSDC0_DAT0_FUNC_NLD0>,
- <MT7623_PIN_120_MSDC0_DAT1_FUNC_NLD1>,
- <MT7623_PIN_113_MSDC0_DAT5_FUNC_NLD5>,
- <MT7623_PIN_115_MSDC0_RSTB_FUNC_NLD8>,
- <MT7623_PIN_119_MSDC0_DAT2_FUNC_NLD2>;
- input-enable;
- drive-strength = <MTK_DRIVE_8mA>;
- bias-pull-up;
- };
-
- pins-we {
- pinmux = <MT7623_PIN_117_MSDC0_CLK_FUNC_NWEB>;
- drive-strength = <MTK_DRIVE_8mA>;
- bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
- };
- };
-};
diff --git a/arch/arm/boot/dts/mt7623n-rfb.dtsi b/arch/arm/boot/dts/mt7623n-rfb.dtsi
index 256c5fd947bf..5c5cc7da5dd2 100644
--- a/arch/arm/boot/dts/mt7623n-rfb.dtsi
+++ b/arch/arm/boot/dts/mt7623n-rfb.dtsi
@@ -1,16 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (c) 2017 MediaTek Inc.
* Author: John Crispin <john@phrozen.org>
* Sean Wang <sean.wang@mediatek.com>
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
*/
/dts-v1/;
@@ -47,10 +40,11 @@
};
memory@80000000 {
+ device_type = "memory";
reg = <0 0x80000000 0 0x40000000>;
};
- usb_p1_vbus: regulator@0 {
+ usb_p1_vbus: regulator-5v {
compatible = "regulator-fixed";
regulator-name = "usb_vbus";
regulator-min-microvolt = <5000000>;
diff --git a/arch/arm/boot/dts/mt8127-moose.dts b/arch/arm/boot/dts/mt8127-moose.dts
index 073e295a1cb4..308829b2da86 100644
--- a/arch/arm/boot/dts/mt8127-moose.dts
+++ b/arch/arm/boot/dts/mt8127-moose.dts
@@ -1,15 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (c) 2014 MediaTek Inc.
* Author: Joe.C <yingjoe.chen@mediatek.com>
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
*/
/dts-v1/;
diff --git a/arch/arm/boot/dts/mt8127.dtsi b/arch/arm/boot/dts/mt8127.dtsi
index 916c095d11b9..3adfc6f7859c 100644
--- a/arch/arm/boot/dts/mt8127.dtsi
+++ b/arch/arm/boot/dts/mt8127.dtsi
@@ -1,15 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (c) 2014 MediaTek Inc.
* Author: Joe.C <yingjoe.chen@mediatek.com>
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
*/
#include <dt-bindings/interrupt-controller/irq.h>
diff --git a/arch/arm/boot/dts/mt8135-evbp1.dts b/arch/arm/boot/dts/mt8135-evbp1.dts
index 460db6d05952..0ace7a40a60d 100644
--- a/arch/arm/boot/dts/mt8135-evbp1.dts
+++ b/arch/arm/boot/dts/mt8135-evbp1.dts
@@ -1,15 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (c) 2014 MediaTek Inc.
* Author: Joe.C <yingjoe.chen@mediatek.com>
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
*/
/dts-v1/;
diff --git a/arch/arm/boot/dts/mt8135.dtsi b/arch/arm/boot/dts/mt8135.dtsi
index a97b4ee4ae79..688069dc1533 100644
--- a/arch/arm/boot/dts/mt8135.dtsi
+++ b/arch/arm/boot/dts/mt8135.dtsi
@@ -1,15 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (c) 2014 MediaTek Inc.
* Author: Joe.C <yingjoe.chen@mediatek.com>
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
*/
#include <dt-bindings/clock/mt8135-clk.h>
diff --git a/arch/arm/boot/dts/omap2420-n810.dts b/arch/arm/boot/dts/omap2420-n810.dts
index 7c485fbfa535..96b9913ecc1f 100644
--- a/arch/arm/boot/dts/omap2420-n810.dts
+++ b/arch/arm/boot/dts/omap2420-n810.dts
@@ -6,11 +6,70 @@
/ {
model = "Nokia N810";
compatible = "nokia,n810", "nokia,n8x0", "ti,omap2420", "ti,omap2";
+
+ vio_ape: vio_ape {
+ compatible = "regulator-fixed";
+ regulator-name = "vio_ape";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ v28_aic: v28_aic {
+ compatible = "regulator-fixed";
+ regulator-name = "v28_aic";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+};
+
+&omap2420_pmx {
+ mcbsp2_pins: mcbsp2_pins {
+ pinctrl-single,pins = <
+ OMAP2420_CORE_IOPAD(0x0124, PIN_INPUT | MUX_MODE1) /* eac_ac_sclk.mcbsp2_clkx */
+ OMAP2420_CORE_IOPAD(0x0125, PIN_INPUT | MUX_MODE1) /* eac_ac_fs.mcbsp2_fsx */
+ OMAP2420_CORE_IOPAD(0x0126, PIN_INPUT | MUX_MODE1) /* eac_ac_din.mcbsp2_dr */
+ OMAP2420_CORE_IOPAD(0x0127, PIN_OUTPUT | MUX_MODE1) /* eac_ac_dout.mcbsp2_dx */
+ >;
+ };
+
+ aic33_pins: aic33_pins {
+ pinctrl-single,pins = <
+ OMAP2420_CORE_IOPAD(0x0129, PIN_OUTPUT | MUX_MODE3) /* eac_ac_rst.gpio118 */
+ OMAP2420_CORE_IOPAD(0x00e8, PIN_OUTPUT | MUX_MODE2) /* vlynq_tx1.sys_clkout2 */
+ >;
+ };
};
&i2c2 {
- aic3x@18 {
- compatible = "tlv320aic3x";
+ aic33@18 {
+ compatible = "ti,tlv320aic33";
reg = <0x18>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&aic33_pins>;
+
+ gpio-reset = <&gpio4 22 GPIO_ACTIVE_LOW>; /* gpio118 */
+
+ ai3x-gpio-func = <
+ 10 /* AIC3X_GPIO1_FUNC_DIGITAL_MIC_MODCLK */
+ 5 /* AIC3X_GPIO2_FUNC_DIGITAL_MIC_INPUT */
+ >;
+ ai3x-micbias-vg = <1>; /* 2V */
+
+ AVDD-supply = <&v28_aic>;
+ DRVDD-supply = <&v28_aic>;
+ IOVDD-supply = <&vio_ape>;
+ DVDD-supply = <&vio_ape>;
+
+ assigned-clocks = <&sys_clkout2_src>, <&sys_clkout2>;
+ assigned-clock-parents = <&func_96m_ck>;
+ assigned-clock-rates = <0>, <12000000>;
};
};
+
+&mcbsp2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcbsp2_pins>;
+
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts
index 0349fcc9dc26..d80587de0bbf 100644
--- a/arch/arm/boot/dts/omap3-beagle-xm.dts
+++ b/arch/arm/boot/dts/omap3-beagle-xm.dts
@@ -30,6 +30,13 @@
ethernet = &ethernet;
};
+ /* fixed 26MHz oscillator */
+ hfclk_26m: oscillator {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <26000000>;
+ };
+
leds {
compatible = "gpio-leds";
@@ -274,6 +281,9 @@
interrupts = <7>; /* SYS_NIRQ cascaded to intc */
interrupt-parent = <&intc>;
+ clocks = <&hfclk_26m>;
+ clock-names = "fck";
+
twl_audio: audio {
compatible = "ti,twl4030-audio";
codec {
diff --git a/arch/arm/boot/dts/omap3-cm-t3x.dtsi b/arch/arm/boot/dts/omap3-cm-t3x.dtsi
index 9dcb18d22cde..cdb632df152a 100644
--- a/arch/arm/boot/dts/omap3-cm-t3x.dtsi
+++ b/arch/arm/boot/dts/omap3-cm-t3x.dtsi
@@ -60,7 +60,7 @@
regulator-max-microvolt = <3300000>;
};
- tv0: connector {
+ tv0: svideo-connector {
compatible = "svideo-connector";
label = "tv";
diff --git a/arch/arm/boot/dts/omap3-devkit8000-common.dtsi b/arch/arm/boot/dts/omap3-devkit8000-common.dtsi
index 0c0bb1b01b0b..746a658e84b6 100644
--- a/arch/arm/boot/dts/omap3-devkit8000-common.dtsi
+++ b/arch/arm/boot/dts/omap3-devkit8000-common.dtsi
@@ -349,10 +349,17 @@
vdda_dac-supply = <&vdac>;
port {
- dpi_dvi_out: endpoint {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ dpi_dvi_out: endpoint@0 {
+ reg = <0>;
remote-endpoint = <&tfp410_in>;
data-lines = <24>;
};
+
+ endpoint@1 {
+ reg = <1>;
+ };
};
};
diff --git a/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi b/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi
index 2d64bcffaaa8..1093387259e2 100644
--- a/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi
+++ b/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi
@@ -30,7 +30,10 @@
&dss {
port {
- dpi_lcd_out: endpoint {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ dpi_lcd_out: endpoint@1 {
+ reg = <1>;
remote-endpoint = <&lcd_in>;
data-lines = <24>;
};
diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi
index 4170be70460e..ac830b917776 100644
--- a/arch/arm/boot/dts/omap3-gta04.dtsi
+++ b/arch/arm/boot/dts/omap3-gta04.dtsi
@@ -30,6 +30,13 @@
display0 = &lcd;
};
+ /* fixed 26MHz oscillator */
+ hfclk_26m: oscillator {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <26000000>;
+ };
+
gpio-keys {
compatible = "gpio-keys";
@@ -312,6 +319,9 @@
interrupts = <7>; /* SYS_NIRQ cascaded to intc */
interrupt-parent = <&intc>;
+ clocks = <&hfclk_26m>;
+ clock-names = "fck";
+
twl_audio: audio {
compatible = "ti,twl4030-audio";
ti,enable-vibra = <1>;
diff --git a/arch/arm/boot/dts/omap3-pandora-common.dtsi b/arch/arm/boot/dts/omap3-pandora-common.dtsi
index f83b1029b3b7..90c98f95b2b3 100644
--- a/arch/arm/boot/dts/omap3-pandora-common.dtsi
+++ b/arch/arm/boot/dts/omap3-pandora-common.dtsi
@@ -27,6 +27,13 @@
display0 = &lcd;
};
+ /* fixed 26MHz oscillator */
+ hfclk_26m: oscillator {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <26000000>;
+ };
+
tv: connector {
compatible = "connector-analog-tv";
label = "tv";
@@ -357,6 +364,9 @@
interrupts = <7>; /* SYS_NIRQ cascaded to intc */
interrupt-parent = <&intc>;
+ clocks = <&hfclk_26m>;
+ clock-names = "fck";
+
twl_power: power {
compatible = "ti,twl4030-power-reset";
ti,use_poweroff;
@@ -611,7 +621,7 @@
pinctrl-names = "default";
pinctrl-0 = <&penirq_pins>;
interrupt-parent = <&gpio3>;
- interrupts = <30 0>; /* GPIO_94 */
+ interrupts = <30 IRQ_TYPE_NONE>; /* GPIO_94 */
pendown-gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>;
vcc-supply = <&vaux4>;
diff --git a/arch/arm/boot/dts/omap3-sb-t35.dtsi b/arch/arm/boot/dts/omap3-sb-t35.dtsi
index 22b4c8bdcc65..fb9842fa922c 100644
--- a/arch/arm/boot/dts/omap3-sb-t35.dtsi
+++ b/arch/arm/boot/dts/omap3-sb-t35.dtsi
@@ -34,7 +34,7 @@
};
};
- dvi0: connector {
+ dvi0: dvi-connector {
compatible = "dvi-connector";
label = "dvi";
diff --git a/arch/arm/boot/dts/pxa3xx.dtsi b/arch/arm/boot/dts/pxa3xx.dtsi
index 982d1a62661d..132a3b8ab148 100644
--- a/arch/arm/boot/dts/pxa3xx.dtsi
+++ b/arch/arm/boot/dts/pxa3xx.dtsi
@@ -8,6 +8,10 @@
(gpio <= 98) ? (0x0400 + 4 * (gpio - 27)) : \
(gpio <= 127) ? (0x0600 + 4 * (gpio - 99)) : \
0)
+#define MFP_PIN_PXA300_2(gpio) \
+ ((gpio <= 1) ? (0x674 + 4 * gpio) : \
+ (gpio <= 6) ? (0x2dc + 4 * gpio) : \
+ 0)
#define MFP_PIN_PXA310(gpio) \
((gpio <= 2) ? (0x00b4 + 4 * gpio) : \
@@ -18,6 +22,11 @@
(gpio <= 262) ? 0 : \
(gpio <= 268) ? (0x052c + 4 * (gpio - 263)) : \
0)
+#define MFP_PIN_PXA310_2(gpio) \
+ ((gpio <= 1) ? (0x674 + 4 * gpio) : \
+ (gpio <= 6) ? (0x2dc + 4 * gpio) : \
+ (gpio <= 10) ? (0x52c + 4 * gpio) : \
+ 0)
#define MFP_PIN_PXA320(gpio) \
((gpio <= 4) ? (0x0124 + 4 * gpio) : \
@@ -30,6 +39,10 @@
(gpio <= 98) ? (0x04f0 + 4 * (gpio - 74)) : \
(gpio <= 127) ? (0x0600 + 4 * (gpio - 99)) : \
0)
+#define MFP_PIN_PXA320_2(gpio) \
+ ((gpio <= 3) ? (0x674 + 4 * gpio) : \
+ (gpio <= 5) ? (0x284 + 4 * gpio) : \
+ 0)
/*
* MFP Alternate functions for pins having a gpio.
@@ -148,6 +161,7 @@
compatible = "intel,pxa3xx-gpio";
reg = <0x40e00000 0x10000>;
clocks = <&clks CLK_GPIO>;
+ gpio-ranges = <&pinctrl 0 0 128>;
interrupt-names = "gpio0", "gpio1", "gpio_mux";
interrupts = <8 9 10>;
gpio-controller;
@@ -160,7 +174,7 @@
compatible = "marvell,pxa-mmc";
reg = <0x41100000 0x1000>;
interrupts = <23>;
- clocks = <&clks CLK_MMC>;
+ clocks = <&clks CLK_MMC1>;
dmas = <&pdma 21 3
&pdma 22 3>;
dma-names = "rx", "tx";
@@ -171,7 +185,7 @@
compatible = "marvell,pxa-mmc";
reg = <0x42000000 0x1000>;
interrupts = <41>;
- clocks = <&clks CLK_MMC1>;
+ clocks = <&clks CLK_MMC2>;
dmas = <&pdma 93 3
&pdma 94 3>;
dma-names = "rx", "tx";
@@ -182,7 +196,7 @@
compatible = "marvell,pxa-mmc";
reg = <0x42500000 0x1000>;
interrupts = <55>;
- clocks = <&clks CLK_MMC2>;
+ clocks = <&clks CLK_MMC3>;
dmas = <&pdma 46 3
&pdma 47 3>;
dma-names = "rx", "tx";
diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index 5341a39c0392..4a99c9255104 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -444,7 +444,7 @@
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
reg = <0x12450000 0x100>,
<0x12400000 0x03>;
- interrupts = <0 193 0x0>;
+ interrupts = <0 193 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GSBI1_UART_CLK>, <&gcc GSBI1_H_CLK>;
clock-names = "core", "iface";
status = "disabled";
@@ -456,11 +456,12 @@
pinctrl-1 = <&i2c1_pins_sleep>;
pinctrl-names = "default", "sleep";
reg = <0x12460000 0x1000>;
- interrupts = <0 194 IRQ_TYPE_NONE>;
+ interrupts = <0 194 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>;
clock-names = "core", "iface";
#address-cells = <1>;
#size-cells = <0>;
+ status = "disabled";
};
};
@@ -484,11 +485,12 @@
pinctrl-0 = <&i2c2_pins>;
pinctrl-1 = <&i2c2_pins_sleep>;
pinctrl-names = "default", "sleep";
- interrupts = <0 196 IRQ_TYPE_NONE>;
+ interrupts = <0 196 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GSBI2_QUP_CLK>, <&gcc GSBI2_H_CLK>;
clock-names = "core", "iface";
#address-cells = <1>;
#size-cells = <0>;
+ status = "disabled";
};
};
@@ -508,12 +510,13 @@
pinctrl-1 = <&i2c3_pins_sleep>;
pinctrl-names = "default", "sleep";
reg = <0x16280000 0x1000>;
- interrupts = <GIC_SPI 151 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GSBI3_QUP_CLK>,
<&gcc GSBI3_H_CLK>;
clock-names = "core", "iface";
#address-cells = <1>;
#size-cells = <0>;
+ status = "disabled";
};
};
@@ -534,10 +537,11 @@
pinctrl-1 = <&i2c4_pins_sleep>;
pinctrl-names = "default", "sleep";
reg = <0x16380000 0x1000>;
- interrupts = <GIC_SPI 153 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GSBI4_QUP_CLK>,
<&gcc GSBI4_H_CLK>;
clock-names = "core", "iface";
+ status = "disabled";
};
};
@@ -556,7 +560,7 @@
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
reg = <0x1a240000 0x100>,
<0x1a200000 0x03>;
- interrupts = <0 154 0x0>;
+ interrupts = <0 154 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
clock-names = "core", "iface";
status = "disabled";
@@ -565,7 +569,7 @@
gsbi5_spi: spi@1a280000 {
compatible = "qcom,spi-qup-v1.1.1";
reg = <0x1a280000 0x1000>;
- interrupts = <0 155 0>;
+ interrupts = <0 155 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-0 = <&spi5_default>;
pinctrl-1 = <&spi5_sleep>;
pinctrl-names = "default", "sleep";
@@ -592,7 +596,7 @@
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
reg = <0x16540000 0x100>,
<0x16500000 0x03>;
- interrupts = <0 156 0x0>;
+ interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GSBI6_UART_CLK>, <&gcc GSBI6_H_CLK>;
clock-names = "core", "iface";
status = "disabled";
@@ -604,7 +608,7 @@
pinctrl-1 = <&i2c6_pins_sleep>;
pinctrl-names = "default", "sleep";
reg = <0x16580000 0x1000>;
- interrupts = <GIC_SPI 157 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GSBI6_QUP_CLK>,
<&gcc GSBI6_H_CLK>;
clock-names = "core", "iface";
@@ -628,7 +632,7 @@
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
reg = <0x16640000 0x1000>,
<0x16600000 0x1000>;
- interrupts = <0 158 0x0>;
+ interrupts = <0 158 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GSBI7_UART_CLK>, <&gcc GSBI7_H_CLK>;
clock-names = "core", "iface";
status = "disabled";
@@ -640,7 +644,7 @@
pinctrl-1 = <&i2c7_pins_sleep>;
pinctrl-names = "default", "sleep";
reg = <0x16680000 0x1000>;
- interrupts = <GIC_SPI 159 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GSBI7_QUP_CLK>,
<&gcc GSBI7_H_CLK>;
clock-names = "core", "iface";
@@ -1056,7 +1060,7 @@
compatible = "qcom,apq8064-ahci", "generic-ahci";
status = "disabled";
reg = <0x29000000 0x180>;
- interrupts = <GIC_SPI 209 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc SFAB_SATA_S_H_CLK>,
<&gcc SATA_H_CLK>,
@@ -1082,7 +1086,7 @@
sdcc1bam:dma@12402000{
compatible = "qcom,bam-v1.3.0";
reg = <0x12402000 0x8000>;
- interrupts = <0 98 0>;
+ interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc SDC1_H_CLK>;
clock-names = "bam_clk";
#dma-cells = <1>;
@@ -1092,7 +1096,7 @@
sdcc3bam:dma@12182000{
compatible = "qcom,bam-v1.3.0";
reg = <0x12182000 0x8000>;
- interrupts = <0 96 0>;
+ interrupts = <0 96 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc SDC3_H_CLK>;
clock-names = "bam_clk";
#dma-cells = <1>;
@@ -1102,7 +1106,7 @@
sdcc4bam:dma@121c2000{
compatible = "qcom,bam-v1.3.0";
reg = <0x121c2000 0x8000>;
- interrupts = <0 95 0>;
+ interrupts = <0 95 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc SDC4_H_CLK>;
clock-names = "bam_clk";
#dma-cells = <1>;
@@ -1181,7 +1185,7 @@
compatible = "qcom,adreno-3xx";
reg = <0x04300000 0x20000>;
reg-names = "kgsl_3d0_reg_memory";
- interrupts = <GIC_SPI 80 0>;
+ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "kgsl_3d0_irq";
clock-names =
"core_clk",
@@ -1281,7 +1285,7 @@
label = "MDSS DSI CTRL->0";
#address-cells = <1>;
#size-cells = <0>;
- interrupts = <GIC_SPI 82 0>;
+ interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x04700000 0x200>;
reg-names = "dsi_ctrl";
@@ -1350,8 +1354,8 @@
<&mmcc MDP_AXI_CLK>;
reg = <0x07500000 0x100000>;
interrupts =
- <GIC_SPI 63 0>,
- <GIC_SPI 64 0>;
+ <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
qcom,ncb = <2>;
};
@@ -1366,8 +1370,8 @@
<&mmcc MDP_AXI_CLK>;
reg = <0x07600000 0x100000>;
interrupts =
- <GIC_SPI 61 0>,
- <GIC_SPI 62 0>;
+ <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
qcom,ncb = <2>;
};
@@ -1382,8 +1386,8 @@
<&mmcc GFX3D_AXI_CLK>;
reg = <0x07c00000 0x100000>;
interrupts =
- <GIC_SPI 69 0>,
- <GIC_SPI 70 0>;
+ <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
qcom,ncb = <3>;
};
@@ -1398,8 +1402,8 @@
<&mmcc GFX3D_AXI_CLK>;
reg = <0x07d00000 0x100000>;
interrupts =
- <GIC_SPI 210 0>,
- <GIC_SPI 211 0>;
+ <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>;
qcom,ncb = <3>;
};
@@ -1417,8 +1421,8 @@
#address-cells = <3>;
#size-cells = <2>;
ranges = <0x81000000 0 0 0x0fe00000 0 0x00100000 /* I/O */
- 0x82000000 0 0 0x08000000 0 0x07e00000>; /* memory */
- interrupts = <GIC_SPI 238 IRQ_TYPE_NONE>;
+ 0x82000000 0 0x08000000 0x08000000 0 0x07e00000>; /* memory */
+ interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "msi";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
index e413b21ee331..418f9a022336 100644
--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
@@ -20,6 +20,14 @@
model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK01.1";
compatible = "qcom,ipq4019";
+ aliases {
+ serial0 = &blsp1_uart1;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
soc {
rng@22000 {
status = "ok";
@@ -61,7 +69,7 @@
status = "ok";
};
- spi_0: spi@78b5000 {
+ spi@78b5000 {
pinctrl-0 = <&spi_0_pins>;
pinctrl-names = "default";
status = "ok";
diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts
new file mode 100644
index 000000000000..7a96f300bc8d
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018, The Linux Foundation. All rights reserved.
+
+#include "qcom-ipq4019-ap.dk04.1.dtsi"
+
+/ {
+ model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK04.1-C1";
+ compatible = "qcom,ipq4019-dk04.1-c1";
+
+ soc {
+ dma@7984000 {
+ status = "ok";
+ };
+
+ qpic-nand@79b0000 {
+ status = "ok";
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c3.dts b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c3.dts
new file mode 100644
index 000000000000..2d1c4c6e42f1
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c3.dts
@@ -0,0 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018, The Linux Foundation. All rights reserved.
+
+#include "qcom-ipq4019-ap.dk04.1.dtsi"
+
+/ {
+ model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK04.1-C3";
+ compatible = "qcom,ipq4019-ap-dk04.1-c3";
+};
diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi
new file mode 100644
index 000000000000..7c1eb1963c67
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi
@@ -0,0 +1,111 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018, The Linux Foundation. All rights reserved.
+
+#include "qcom-ipq4019.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK04.1";
+
+ aliases {
+ serial0 = &blsp1_uart1;
+ serial1 = &blsp1_uart2;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x10000000>; /* 256MB */
+ };
+
+ soc {
+ pinctrl@1000000 {
+ serial_0_pins: serial0-pinmux {
+ pins = "gpio16", "gpio17";
+ function = "blsp_uart0";
+ bias-disable;
+ };
+
+ serial_1_pins: serial1-pinmux {
+ pins = "gpio8", "gpio9",
+ "gpio10", "gpio11";
+ function = "blsp_uart1";
+ bias-disable;
+ };
+
+ spi_0_pins: spi-0-pinmux {
+ pinmux {
+ function = "blsp_spi0";
+ pins = "gpio13", "gpio14", "gpio15";
+ bias-disable;
+ };
+ pinmux_cs {
+ function = "gpio";
+ pins = "gpio12";
+ bias-disable;
+ output-high;
+ };
+ };
+
+ i2c_0_pins: i2c-0-pinmux {
+ pins = "gpio20", "gpio21";
+ function = "blsp_i2c0";
+ bias-disable;
+ };
+
+ nand_pins: nand-pins {
+ pins = "gpio53", "gpio55", "gpio56",
+ "gpio57", "gpio58", "gpio59",
+ "gpio60", "gpio62", "gpio63",
+ "gpio64", "gpio65", "gpio66",
+ "gpio67", "gpio68", "gpio69";
+ function = "qpic";
+ };
+ };
+
+ serial@78af000 {
+ pinctrl-0 = <&serial_0_pins>;
+ pinctrl-names = "default";
+ status = "ok";
+ };
+
+ serial@78b0000 {
+ pinctrl-0 = <&serial_1_pins>;
+ pinctrl-names = "default";
+ status = "ok";
+ };
+
+ dma@7884000 {
+ status = "ok";
+ };
+
+ spi@78b5000 { /* BLSP1 QUP1 */
+ pinctrl-0 = <&spi_0_pins>;
+ pinctrl-names = "default";
+ status = "ok";
+ cs-gpios = <&tlmm 12 0>;
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0>;
+ compatible = "n25q128a11";
+ spi-max-frequency = <24000000>;
+ };
+ };
+
+ pci@40000000 {
+ status = "ok";
+ perst-gpio = <&tlmm 38 0x1>;
+ };
+
+ qpic-nand@79b0000 {
+ pinctrl-0 = <&nand_pins>;
+ pinctrl-names = "default";
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts
new file mode 100644
index 000000000000..8c7ef6537ae6
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts
@@ -0,0 +1,64 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018, The Linux Foundation. All rights reserved.
+
+#include "qcom-ipq4019-ap.dk07.1.dtsi"
+
+/ {
+ model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK07.1-C1";
+ compatible = "qcom,ipq4019-ap-dk07.1-c1";
+
+ soc {
+ pci@40000000 {
+ status = "ok";
+ perst-gpio = <&tlmm 38 0x1>;
+ };
+
+ spi@78b6000 {
+ status = "ok";
+ };
+
+ pinctrl@1000000 {
+ serial_1_pins: serial1-pinmux {
+ pins = "gpio8", "gpio9",
+ "gpio10", "gpio11";
+ function = "blsp_uart1";
+ bias-disable;
+ };
+
+ spi_0_pins: spi-0-pinmux {
+ pinmux {
+ function = "blsp_spi0";
+ pins = "gpio13", "gpio14", "gpio15";
+ bias-disable;
+ };
+ pinmux_cs {
+ function = "gpio";
+ pins = "gpio12";
+ bias-disable;
+ output-high;
+ };
+ };
+ };
+
+ serial@78b0000 {
+ pinctrl-0 = <&serial_1_pins>;
+ pinctrl-names = "default";
+ status = "ok";
+ };
+
+ spi@78b5000 {
+ pinctrl-0 = <&spi_0_pins>;
+ pinctrl-names = "default";
+ status = "ok";
+ cs-gpios = <&tlmm 12 0>;
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0>;
+ compatible = "n25q128a11";
+ spi-max-frequency = <24000000>;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c2.dts b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c2.dts
new file mode 100644
index 000000000000..af7a9028d492
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c2.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018, The Linux Foundation. All rights reserved.
+
+#include "qcom-ipq4019-ap.dk07.1.dtsi"
+
+/ {
+ model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK07.1-C2";
+ compatible = "qcom,ipq4019-ap-dk07.1-c2";
+
+ soc {
+ pinctrl@1000000 {
+ serial_1_pins: serial1-pinmux {
+ pins = "gpio8", "gpio9";
+ function = "blsp_uart1";
+ bias-disable;
+ };
+ };
+
+ serial@78b0000 {
+ pinctrl-0 = <&serial_1_pins>;
+ pinctrl-names = "default";
+ status = "ok";
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi
new file mode 100644
index 000000000000..9f1a5a668772
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018, The Linux Foundation. All rights reserved.
+
+#include "qcom-ipq4019.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK07.1";
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x20000000>; /* 512MB */
+ };
+
+ aliases {
+ serial0 = &blsp1_uart1;
+ serial1 = &blsp1_uart2;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ soc {
+ pinctrl@1000000 {
+ serial_0_pins: serial0-pinmux {
+ pins = "gpio16", "gpio17";
+ function = "blsp_uart0";
+ bias-disable;
+ };
+
+ i2c_0_pins: i2c-0-pinmux {
+ pins = "gpio20", "gpio21";
+ function = "blsp_i2c0";
+ bias-disable;
+ };
+
+ nand_pins: nand-pins {
+ pins = "gpio53", "gpio55", "gpio56",
+ "gpio57", "gpio58", "gpio59",
+ "gpio60", "gpio62", "gpio63",
+ "gpio64", "gpio65", "gpio66",
+ "gpio67", "gpio68", "gpio69";
+ function = "qpic";
+ };
+ };
+
+ serial@78af000 {
+ pinctrl-0 = <&serial_0_pins>;
+ pinctrl-names = "default";
+ status = "ok";
+ };
+
+ dma@7884000 {
+ status = "ok";
+ };
+
+ i2c@78b7000 { /* BLSP1 QUP2 */
+ pinctrl-0 = <&i2c_0_pins>;
+ pinctrl-names = "default";
+ status = "ok";
+ };
+
+ dma@7984000 {
+ status = "ok";
+ };
+
+ qpic-nand@79b0000 {
+ pinctrl-0 = <&nand_pins>;
+ pinctrl-names = "default";
+ status = "ok";
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi
index 10d112a4078e..7bcd7635e723 100644
--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
@@ -23,9 +23,27 @@
compatible = "qcom,ipq4019";
interrupt-parent = <&intc>;
+ reserved-memory {
+ #address-cells = <0x1>;
+ #size-cells = <0x1>;
+ ranges;
+
+ smem_region: smem@87e00000 {
+ reg = <0x87e00000 0x080000>;
+ no-map;
+ };
+
+ tz@87e80000 {
+ reg = <0x87e80000 0x180000>;
+ no-map;
+ };
+ };
+
aliases {
- spi0 = &spi_0;
- i2c0 = &i2c_0;
+ spi0 = &blsp1_spi1;
+ spi1 = &blsp1_spi2;
+ i2c0 = &blsp1_i2c3;
+ i2c1 = &blsp1_i2c4;
};
cpus {
@@ -45,7 +63,7 @@
48000 1100000
200000 1100000
500000 1100000
- 666000 1100000
+ 716000 1100000
>;
clock-latency = <256000>;
};
@@ -104,6 +122,12 @@
};
};
+ firmware {
+ scm {
+ compatible = "qcom,scm-ipq4019";
+ };
+ };
+
timer {
compatible = "arm,armv7-timer";
interrupts = <1 2 0xf08>,
@@ -149,13 +173,13 @@
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
- interrupts = <0 208 0>;
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
};
blsp_dma: dma@7884000 {
compatible = "qcom,bam-v1.7.0";
reg = <0x07884000 0x23000>;
- interrupts = <GIC_SPI 238 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "bam_clk";
#dma-cells = <1>;
@@ -163,7 +187,7 @@
status = "disabled";
};
- spi_0: spi@78b5000 {
+ blsp1_spi1: spi@78b5000 { /* BLSP1 QUP1 */
compatible = "qcom,spi-qup-v2.2.1";
reg = <0x78b5000 0x600>;
interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
@@ -172,10 +196,26 @@
clock-names = "core", "iface";
#address-cells = <1>;
#size-cells = <0>;
+ dmas = <&blsp_dma 5>, <&blsp_dma 4>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ blsp1_spi2: spi@78b6000 { /* BLSP1 QUP2 */
+ compatible = "qcom,spi-qup-v2.2.1";
+ reg = <0x78b6000 0x600>;
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ dmas = <&blsp_dma 7>, <&blsp_dma 6>;
+ dma-names = "rx", "tx";
status = "disabled";
};
- i2c_0: i2c@78b7000 {
+ blsp1_i2c3: i2c@78b7000 { /* BLSP1 QUP3 */
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x78b7000 0x600>;
interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
@@ -184,14 +224,29 @@
clock-names = "iface", "core";
#address-cells = <1>;
#size-cells = <0>;
+ dmas = <&blsp_dma 9>, <&blsp_dma 8>;
+ dma-names = "rx", "tx";
status = "disabled";
};
+ blsp1_i2c4: i2c@78b8000 { /* BLSP1 QUP4 */
+ compatible = "qcom,i2c-qup-v2.2.1";
+ reg = <0x78b8000 0x600>;
+ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_AHB_CLK>,
+ <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>;
+ clock-names = "iface", "core";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ dmas = <&blsp_dma 11>, <&blsp_dma 10>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
cryptobam: dma@8e04000 {
compatible = "qcom,bam-v1.7.0";
reg = <0x08e04000 0x20000>;
- interrupts = <GIC_SPI 207 0>;
+ interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_CRYPTO_AHB_CLK>;
clock-names = "bam_clk";
#dma-cells = <1>;
@@ -256,10 +311,10 @@
regulator;
};
- serial@78af000 {
+ blsp1_uart1: serial@78af000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0x78af000 0x200>;
- interrupts = <0 107 0>;
+ interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
@@ -268,10 +323,10 @@
dma-names = "rx", "tx";
};
- serial@78b0000 {
+ blsp1_uart2: serial@78b0000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0x78b0000 0x200>;
- interrupts = <0 108 0>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
@@ -293,6 +348,101 @@
reg = <0x4ab000 0x4>;
};
+ pcie0: pci@40000000 {
+ compatible = "qcom,pcie-ipq4019", "snps,dw-pcie";
+ reg = <0x40000000 0xf1d
+ 0x40000f20 0xa8
+ 0x80000 0x2000
+ 0x40100000 0x1000>;
+ reg-names = "dbi", "elbi", "parf", "config";
+ device_type = "pci";
+ linux,pci-domain = <0>;
+ bus-range = <0x00 0xff>;
+ num-lanes = <1>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ ranges = <0x81000000 0 0x40200000 0x40200000 0 0x00100000
+ 0x82000000 0 0x48000000 0x48000000 0 0x10000000>;
+
+ interrupts = <GIC_SPI 141 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "msi";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &intc 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+ <0 0 0 2 &intc 0 143 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+ <0 0 0 3 &intc 0 144 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+ <0 0 0 4 &intc 0 145 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+ clocks = <&gcc GCC_PCIE_AHB_CLK>,
+ <&gcc GCC_PCIE_AXI_M_CLK>,
+ <&gcc GCC_PCIE_AXI_S_CLK>;
+ clock-names = "aux",
+ "master_bus",
+ "slave_bus";
+
+ resets = <&gcc PCIE_AXI_M_ARES>,
+ <&gcc PCIE_AXI_S_ARES>,
+ <&gcc PCIE_PIPE_ARES>,
+ <&gcc PCIE_AXI_M_VMIDMT_ARES>,
+ <&gcc PCIE_AXI_S_XPU_ARES>,
+ <&gcc PCIE_PARF_XPU_ARES>,
+ <&gcc PCIE_PHY_ARES>,
+ <&gcc PCIE_AXI_M_STICKY_ARES>,
+ <&gcc PCIE_PIPE_STICKY_ARES>,
+ <&gcc PCIE_PWR_ARES>,
+ <&gcc PCIE_AHB_ARES>,
+ <&gcc PCIE_PHY_AHB_ARES>;
+ reset-names = "axi_m",
+ "axi_s",
+ "pipe",
+ "axi_m_vmid",
+ "axi_s_xpu",
+ "parf",
+ "phy",
+ "axi_m_sticky",
+ "pipe_sticky",
+ "pwr",
+ "ahb",
+ "phy_ahb";
+
+ status = "disabled";
+ };
+
+ qpic_bam: dma@7984000 {
+ compatible = "qcom,bam-v1.7.0";
+ reg = <0x7984000 0x1a000>;
+ interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_QPIC_CLK>;
+ clock-names = "bam_clk";
+ #dma-cells = <1>;
+ qcom,ee = <0>;
+ status = "disabled";
+ };
+
+ nand: qpic-nand@79b0000 {
+ compatible = "qcom,ipq4019-nand";
+ reg = <0x79b0000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&gcc GCC_QPIC_CLK>,
+ <&gcc GCC_QPIC_AHB_CLK>;
+ clock-names = "core", "aon";
+
+ dmas = <&qpic_bam 0>,
+ <&qpic_bam 1>,
+ <&qpic_bam 2>;
+ dma-names = "tx", "rx", "cmd";
+ status = "disabled";
+
+ nand@0 {
+ reg = <0>;
+
+ nand-ecc-strength = <4>;
+ nand-ecc-step-size = <512>;
+ nand-bus-width = <8>;
+ };
+ };
+
wifi0: wifi@a000000 {
compatible = "qcom,ipq4019-wifi";
reg = <0xa000000 0x200000>;
@@ -326,7 +476,7 @@
<GIC_SPI 45 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 46 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 47 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 168 IRQ_TYPE_NONE>;
+ <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "msi0", "msi1", "msi2", "msi3",
"msi4", "msi5", "msi6", "msi7",
"msi8", "msi9", "msi10", "msi11",
@@ -368,7 +518,7 @@
<GIC_SPI 61 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 62 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 63 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 169 IRQ_TYPE_NONE>;
+ <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "msi0", "msi1", "msi2", "msi3",
"msi4", "msi5", "msi6", "msi7",
"msi8", "msi9", "msi10", "msi11",
diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi
index 33030f9419fe..70698941f64c 100644
--- a/arch/arm/boot/dts/qcom-msm8660.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8660.dtsi
@@ -452,7 +452,7 @@
clock-names = "ram";
rpmcc: clock-controller {
- compatible = "qcom,rpmcc-apq8660", "qcom,rpmcc";
+ compatible = "qcom,rpmcc-msm8660", "qcom,rpmcc";
#clock-cells = <1>;
};
diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-amami.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-amami.dts
new file mode 100644
index 000000000000..5669f5f58a86
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-amami.dts
@@ -0,0 +1,436 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "qcom-msm8974.dtsi"
+#include "qcom-pm8841.dtsi"
+#include "qcom-pm8941.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+/ {
+ model = "Sony Xperia Z1 Compact";
+ compatible = "sony,xperia-amami", "qcom,msm8974";
+
+ aliases {
+ serial0 = &blsp1_uart2;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ input-name = "gpio-keys";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio_keys_pin_a>;
+
+ volume-down {
+ label = "volume_down";
+ gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
+ linux,input-type = <1>;
+ linux,code = <KEY_VOLUMEDOWN>;
+ };
+
+ camera-snapshot {
+ label = "camera_snapshot";
+ gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>;
+ linux,input-type = <1>;
+ linux,code = <KEY_CAMERA>;
+ };
+
+ camera-focus {
+ label = "camera_focus";
+ gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>;
+ linux,input-type = <1>;
+ linux,code = <KEY_CAMERA_FOCUS>;
+ };
+
+ volume-up {
+ label = "volume_up";
+ gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
+ linux,input-type = <1>;
+ linux,code = <KEY_VOLUMEUP>;
+ };
+ };
+
+ memory@0 {
+ reg = <0 0x40000000>, <0x40000000 0x40000000>;
+ device_type = "memory";
+ };
+
+ smd {
+ rpm {
+ rpm_requests {
+ pm8841-regulators {
+ s1 {
+ regulator-min-microvolt = <675000>;
+ regulator-max-microvolt = <1050000>;
+ };
+
+ s2 {
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1050000>;
+ };
+
+ s3 {
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1050000>;
+ };
+
+ s4 {
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1050000>;
+ };
+ };
+
+ pm8941-regulators {
+ vdd_l1_l3-supply = <&pm8941_s1>;
+ vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
+ vdd_l4_l11-supply = <&pm8941_s1>;
+ vdd_l5_l7-supply = <&pm8941_s2>;
+ vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
+ vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
+ vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
+ vdd_l21-supply = <&vreg_boost>;
+
+ s1 {
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ s2 {
+ regulator-min-microvolt = <2150000>;
+ regulator-max-microvolt = <2150000>;
+ regulator-boot-on;
+ };
+
+ s3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ s4 {
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ l1 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ l2 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ l3 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ l4 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ };
+
+ l5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ l6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-boot-on;
+ };
+
+ l7 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-boot-on;
+ };
+
+ l8 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ l9 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ };
+
+ l11 {
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1350000>;
+ };
+
+ l12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ l13 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+
+ regulator-boot-on;
+ };
+
+ l14 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ l15 {
+ regulator-min-microvolt = <2050000>;
+ regulator-max-microvolt = <2050000>;
+ };
+
+ l16 {
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <2700000>;
+ };
+
+ l17 {
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <2700000>;
+ };
+
+ l18 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ };
+
+ l19 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ l20 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+
+ regulator-allow-set-load;
+ regulator-boot-on;
+ regulator-system-load = <200000>;
+ };
+
+ l21 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+
+ regulator-boot-on;
+ };
+
+ l22 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ l23 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ l24 {
+ regulator-min-microvolt = <3075000>;
+ regulator-max-microvolt = <3075000>;
+
+ regulator-boot-on;
+ };
+ };
+ };
+ };
+ };
+};
+
+&soc {
+ sdhci@f9824900 {
+ status = "ok";
+
+ vmmc-supply = <&pm8941_l20>;
+ vqmmc-supply = <&pm8941_s3>;
+
+ bus-width = <8>;
+ non-removable;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdhc1_pin_a>;
+ };
+
+ sdhci@f98a4900 {
+ status = "ok";
+
+ bus-width = <4>;
+
+ vmmc-supply = <&pm8941_l21>;
+ vqmmc-supply = <&pm8941_l13>;
+
+ cd-gpios = <&msmgpio 62 GPIO_ACTIVE_LOW>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdhc2_pin_a>, <&sdhc2_cd_pin_a>;
+ };
+
+ serial@f991e000 {
+ status = "ok";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&blsp1_uart2_pin_a>;
+ };
+
+
+ pinctrl@fd510000 {
+ blsp1_uart2_pin_a: blsp1-uart2-pin-active {
+ rx {
+ pins = "gpio5";
+ function = "blsp_uart2";
+
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ tx {
+ pins = "gpio4";
+ function = "blsp_uart2";
+
+ drive-strength = <4>;
+ bias-disable;
+ };
+ };
+
+ i2c2_pins: i2c2 {
+ mux {
+ pins = "gpio6", "gpio7";
+ function = "blsp_i2c2";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ sdhc1_pin_a: sdhc1-pin-active {
+ clk {
+ pins = "sdc1_clk";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ cmd-data {
+ pins = "sdc1_cmd", "sdc1_data";
+ drive-strength = <10>;
+ bias-pull-up;
+ };
+ };
+
+ sdhc2_cd_pin_a: sdhc2-cd-pin-active {
+ pins = "gpio62";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ sdhc2_pin_a: sdhc2-pin-active {
+ clk {
+ pins = "sdc2_clk";
+ drive-strength = <10>;
+ bias-disable;
+ };
+
+ cmd-data {
+ pins = "sdc2_cmd", "sdc2_data";
+ drive-strength = <6>;
+ bias-pull-up;
+ };
+ };
+ };
+
+ dma-controller@f9944000 {
+ qcom,controlled-remotely;
+ };
+
+ usb@f9a55000 {
+ status = "ok";
+
+ phys = <&usb_hs1_phy>;
+ phy-select = <&tcsr 0xb000 0>;
+ extcon = <&smbb>, <&usb_id>;
+ vbus-supply = <&chg_otg>;
+
+ hnp-disable;
+ srp-disable;
+ adp-disable;
+
+ ulpi {
+ phy@a {
+ status = "ok";
+
+ v1p8-supply = <&pm8941_l6>;
+ v3p3-supply = <&pm8941_l24>;
+
+ extcon = <&smbb>;
+ qcom,init-seq = /bits/ 8 <0x1 0x64>;
+ };
+ };
+ };
+};
+
+&spmi_bus {
+ pm8941@0 {
+ charger@1000 {
+ qcom,fast-charge-safe-current = <1300000>;
+ qcom,fast-charge-current-limit = <1300000>;
+ qcom,dc-current-limit = <1300000>;
+ qcom,fast-charge-safe-voltage = <4400000>;
+ qcom,fast-charge-high-threshold-voltage = <4350000>;
+ qcom,fast-charge-low-threshold-voltage = <3400000>;
+ qcom,auto-recharge-threshold-voltage = <4200000>;
+ qcom,minimum-input-voltage = <4300000>;
+ };
+
+ gpios@c000 {
+ gpio_keys_pin_a: gpio-keys-active {
+ pins = "gpio2", "gpio3", "gpio4", "gpio5";
+ function = "normal";
+
+ bias-pull-up;
+ power-source = <PM8941_GPIO_S3>;
+ };
+ };
+
+ coincell@2800 {
+ status = "ok";
+ qcom,rset-ohms = <2100>;
+ qcom,vset-millivolts = <3000>;
+ };
+ };
+
+ pm8941@1 {
+ wled@d800 {
+ status = "ok";
+
+ qcom,cs-out;
+ qcom,current-limit = <20>;
+ qcom,current-boost-limit = <805>;
+ qcom,switching-freq = <1600>;
+ qcom,ovp = <29>;
+ qcom,num-strings = <2>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/qcom-pm8941.dtsi b/arch/arm/boot/dts/qcom-pm8941.dtsi
index 1d5ef55c7ee5..2515c5c217ac 100644
--- a/arch/arm/boot/dts/qcom-pm8941.dtsi
+++ b/arch/arm/boot/dts/qcom-pm8941.dtsi
@@ -139,6 +139,9 @@
#size-cells = <0>;
#io-channel-cells = <1>;
+ bat_temp {
+ reg = <VADC_LR_MUX1_BAT_THERM>;
+ };
die_temp {
reg = <VADC_DIE_TEMP>;
};
@@ -154,6 +157,9 @@
ref_vdd {
reg = <VADC_VDD_VADC>;
};
+ vbat_sns {
+ reg = <VADC_VBAT_SNS>;
+ };
};
pm8941_iadc: iadc@3600 {
diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi
index a97458112ff6..567a6a725f9c 100644
--- a/arch/arm/boot/dts/rk3036.dtsi
+++ b/arch/arm/boot/dts/rk3036.dtsi
@@ -197,6 +197,8 @@
reg = <0x10118300 0x100>;
interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "vop_mmu";
+ clocks = <&cru ACLK_LCDC>, <&cru HCLK_LCDC>;
+ clock-names = "aclk", "iface";
#iommu-cells = <0>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/rk322x.dtsi b/arch/arm/boot/dts/rk322x.dtsi
index df1e47858675..be80e9a2c9af 100644
--- a/arch/arm/boot/dts/rk322x.dtsi
+++ b/arch/arm/boot/dts/rk322x.dtsi
@@ -584,6 +584,8 @@
reg = <0x20020800 0x100>;
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "vpu_mmu";
+ clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>;
+ clock-names = "aclk", "iface";
iommu-cells = <0>;
status = "disabled";
};
@@ -593,6 +595,8 @@
reg = <0x20030480 0x40>, <0x200304c0 0x40>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "vdec_mmu";
+ clocks = <&cru ACLK_RKVDEC>, <&cru HCLK_RKVDEC>;
+ clock-names = "aclk", "iface";
iommu-cells = <0>;
status = "disabled";
};
@@ -602,6 +606,8 @@
reg = <0x20053f00 0x100>;
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "vop_mmu";
+ clocks = <&cru ACLK_VOP>, <&cru HCLK_VOP>;
+ clock-names = "aclk", "iface";
iommu-cells = <0>;
status = "disabled";
};
@@ -611,6 +617,8 @@
reg = <0x20070800 0x100>;
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "iep_mmu";
+ clocks = <&cru ACLK_IEP>, <&cru HCLK_IEP>;
+ clock-names = "aclk", "iface";
iommu-cells = <0>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/rk3288-phycore-som.dtsi b/arch/arm/boot/dts/rk3288-phycore-som.dtsi
index f13bcb1cd3d9..aaab2d171ffe 100644
--- a/arch/arm/boot/dts/rk3288-phycore-som.dtsi
+++ b/arch/arm/boot/dts/rk3288-phycore-som.dtsi
@@ -151,6 +151,7 @@
ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
enet-phy-lane-no-swap;
+ ti,clk-output-sel = <DP83867_CLK_O_SEL_CHN_A_TCLK>;
};
};
};
diff --git a/arch/arm/boot/dts/rk3288-tinker.dts b/arch/arm/boot/dts/rk3288-tinker.dts
index 346b0d8b474d..127488f9f174 100644
--- a/arch/arm/boot/dts/rk3288-tinker.dts
+++ b/arch/arm/boot/dts/rk3288-tinker.dts
@@ -49,6 +49,10 @@
model = "Rockchip RK3288 Tinker Board";
compatible = "asus,rk3288-tinker", "rockchip,rk3288";
+ chosen {
+ stdout-path = "serial2:115200n8";
+ };
+
memory {
reg = <0x0 0x0 0x0 0x80000000>;
device_type = "memory";
diff --git a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi
index be487111d025..b16d570ff029 100644
--- a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi
+++ b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi
@@ -95,7 +95,8 @@
pinctrl-names = "default";
pinctrl-0 = <&bl_en>;
pwms = <&pwm0 0 1000000 0>;
- pwm-delay-us = <10000>;
+ post-pwm-on-delay-ms = <10>;
+ pwm-off-delay-ms = <10>;
};
gpio-charger {
diff --git a/arch/arm/boot/dts/rk3288-veyron-minnie.dts b/arch/arm/boot/dts/rk3288-veyron-minnie.dts
index 544de6027aaa..4c5307e62001 100644
--- a/arch/arm/boot/dts/rk3288-veyron-minnie.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-minnie.dts
@@ -123,6 +123,8 @@
240 241 242 243 244 245 246 247
248 249 250 251 252 253 254 255>;
power-supply = <&backlight_regulator>;
+ post-pwm-on-delay-ms = <200>;
+ pwm-off-delay-ms = <200>;
};
&emmc {
diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index 354aff45c1af..d7e49d29ace5 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -959,6 +959,8 @@
reg = <0x0 0xff900800 0x0 0x40>;
interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "iep_mmu";
+ clocks = <&cru ACLK_IEP>, <&cru HCLK_IEP>;
+ clock-names = "aclk", "iface";
#iommu-cells = <0>;
status = "disabled";
};
@@ -968,6 +970,8 @@
reg = <0x0 0xff914000 0x0 0x100>, <0x0 0xff915000 0x0 0x100>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "isp_mmu";
+ clocks = <&cru ACLK_ISP>, <&cru HCLK_ISP>;
+ clock-names = "aclk", "iface";
#iommu-cells = <0>;
rockchip,disable-mmu-reset;
status = "disabled";
@@ -1027,6 +1031,8 @@
reg = <0x0 0xff930300 0x0 0x100>;
interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "vopb_mmu";
+ clocks = <&cru ACLK_VOP0>, <&cru HCLK_VOP0>;
+ clock-names = "aclk", "iface";
power-domains = <&power RK3288_PD_VIO>;
#iommu-cells = <0>;
status = "disabled";
@@ -1075,6 +1081,8 @@
reg = <0x0 0xff940300 0x0 0x100>;
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "vopl_mmu";
+ clocks = <&cru ACLK_VOP1>, <&cru HCLK_VOP1>;
+ clock-names = "aclk", "iface";
power-domains = <&power RK3288_PD_VIO>;
#iommu-cells = <0>;
status = "disabled";
@@ -1206,6 +1214,8 @@
reg = <0x0 0xff9a0800 0x0 0x100>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "vpu_mmu";
+ clocks = <&cru ACLK_VCODEC>, <&cru HCLK_VCODEC>;
+ clock-names = "aclk", "iface";
#iommu-cells = <0>;
status = "disabled";
};
@@ -1215,6 +1225,8 @@
reg = <0x0 0xff9c0440 0x0 0x40>, <0x0 0xff9c0480 0x0 0x40>;
interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hevc_mmu";
+ clocks = <&cru ACLK_HEVC>, <&cru HCLK_HEVC>;
+ clock-names = "aclk", "iface";
#iommu-cells = <0>;
status = "disabled";
};
@@ -1848,16 +1860,16 @@
uart4 {
uart4_xfer: uart4-xfer {
- rockchip,pins = <5 12 3 &pcfg_pull_up>,
- <5 13 3 &pcfg_pull_none>;
+ rockchip,pins = <5 15 3 &pcfg_pull_up>,
+ <5 14 3 &pcfg_pull_none>;
};
uart4_cts: uart4-cts {
- rockchip,pins = <5 14 3 &pcfg_pull_up>;
+ rockchip,pins = <5 12 3 &pcfg_pull_up>;
};
uart4_rts: uart4-rts {
- rockchip,pins = <5 15 3 &pcfg_pull_none>;
+ rockchip,pins = <5 13 3 &pcfg_pull_none>;
};
};
diff --git a/arch/arm/boot/dts/s3c2416-smdk2416.dts b/arch/arm/boot/dts/s3c2416-smdk2416.dts
index a1c9d8c695cc..5164386aff3a 100644
--- a/arch/arm/boot/dts/s3c2416-smdk2416.dts
+++ b/arch/arm/boot/dts/s3c2416-smdk2416.dts
@@ -12,14 +12,13 @@
model = "SMDK2416";
compatible = "samsung,s3c2416";
- memory {
+ memory@30000000 {
+ device_type = "memory";
reg = <0x30000000 0x4000000>;
};
clocks {
compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
xti: xti {
compatible = "fixed-clock";
diff --git a/arch/arm/boot/dts/s3c2416.dtsi b/arch/arm/boot/dts/s3c2416.dtsi
index 3c7385cab248..6adf64ea3ff2 100644
--- a/arch/arm/boot/dts/s3c2416.dtsi
+++ b/arch/arm/boot/dts/s3c2416.dtsi
@@ -18,9 +18,6 @@
};
cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
cpu {
compatible = "arm,arm926ej-s";
};
@@ -30,7 +27,7 @@
compatible = "samsung,s3c2416-irq";
};
- clocks: clock-controller@0x4c000000 {
+ clocks: clock-controller@4c000000 {
compatible = "samsung,s3c2416-clock";
reg = <0x4c000000 0x40>;
#clock-cells = <1>;
@@ -69,7 +66,7 @@
<&clocks SCLK_UART>;
};
- uart_3: serial@5000C000 {
+ uart_3: serial@5000c000 {
compatible = "samsung,s3c2440-uart";
reg = <0x5000C000 0x4000>;
interrupts = <1 18 24 4>, <1 18 25 4>;
@@ -80,7 +77,7 @@
status = "disabled";
};
- sdhci_1: sdhci@4AC00000 {
+ sdhci_1: sdhci@4ac00000 {
compatible = "samsung,s3c6410-sdhci";
reg = <0x4AC00000 0x100>;
interrupts = <0 0 21 3>;
@@ -91,7 +88,7 @@
status = "disabled";
};
- sdhci_0: sdhci@4A800000 {
+ sdhci_0: sdhci@4a800000 {
compatible = "samsung,s3c6410-sdhci";
reg = <0x4A800000 0x100>;
interrupts = <0 0 20 3>;
diff --git a/arch/arm/boot/dts/s3c24xx.dtsi b/arch/arm/boot/dts/s3c24xx.dtsi
index 34c7fe6751cf..6d8dd3cdd3c0 100644
--- a/arch/arm/boot/dts/s3c24xx.dtsi
+++ b/arch/arm/boot/dts/s3c24xx.dtsi
@@ -5,11 +5,11 @@
* Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de>
*/
-#include "skeleton.dtsi"
-
/ {
compatible = "samsung,s3c24xx";
interrupt-parent = <&intc>;
+ #address-cells = <1>;
+ #size-cells = <1>;
aliases {
pinctrl0 = &pinctrl_0;
diff --git a/arch/arm/boot/dts/s3c6410-mini6410.dts b/arch/arm/boot/dts/s3c6410-mini6410.dts
index f68601bd9c91..0e159c884f97 100644
--- a/arch/arm/boot/dts/s3c6410-mini6410.dts
+++ b/arch/arm/boot/dts/s3c6410-mini6410.dts
@@ -19,7 +19,8 @@
model = "FriendlyARM Mini6410 board based on S3C6410";
compatible = "friendlyarm,mini6410", "samsung,s3c6410";
- memory {
+ memory@50000000 {
+ device_type = "memory";
reg = <0x50000000 0x10000000>;
};
diff --git a/arch/arm/boot/dts/s3c6410-smdk6410.dts b/arch/arm/boot/dts/s3c6410-smdk6410.dts
index b6b5afcd7602..a9a5689dc462 100644
--- a/arch/arm/boot/dts/s3c6410-smdk6410.dts
+++ b/arch/arm/boot/dts/s3c6410-smdk6410.dts
@@ -19,7 +19,8 @@
model = "SAMSUNG SMDK6410 board based on S3C6410";
compatible = "samsung,mini6410", "samsung,s3c6410";
- memory {
+ memory@50000000 {
+ device_type = "memory";
reg = <0x50000000 0x8000000>;
};
diff --git a/arch/arm/boot/dts/s3c64xx.dtsi b/arch/arm/boot/dts/s3c64xx.dtsi
index e2be3fbdd3f3..2e611df37911 100644
--- a/arch/arm/boot/dts/s3c64xx.dtsi
+++ b/arch/arm/boot/dts/s3c64xx.dtsi
@@ -13,10 +13,12 @@
* nodes can be added to this file.
*/
-#include "skeleton.dtsi"
#include <dt-bindings/clock/samsung,s3c64xx-clock.h>
/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
aliases {
i2c0 = &i2c0;
pinctrl0 = &pinctrl0;
diff --git a/arch/arm/boot/dts/ste-ccu8540-pinctrl.dtsi b/arch/arm/boot/dts/ste-ccu8540-pinctrl.dtsi
deleted file mode 100644
index 52dba2e39c71..000000000000
--- a/arch/arm/boot/dts/ste-ccu8540-pinctrl.dtsi
+++ /dev/null
@@ -1,196 +0,0 @@
-/*
- * Copyright 2012 ST-Ericsson
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-#include "ste-nomadik-pinctrl.dtsi"
-
-/ {
- soc {
- pinctrl {
- uart0 {
- uart0_default_mux: uart0_mux {
- default_mux {
- function = "u0";
- groups = "u0_a_1";
- };
- };
-
- uart0_default_mode: uart0_default {
- default_cfg1 {
- pins = "GPIO0", "GPIO2";
- ste,config = <&in_pu>;
- };
-
- default_cfg2 {
- pins = "GPIO1", "GPIO3";
- ste,config = <&out_hi>;
- };
- };
-
- uart0_sleep_mode: uart0_sleep {
- sleep_cfg1 {
- pins = "GPIO0", "GPIO2";
- ste,config = <&slpm_in_pu>;
- };
-
- sleep_cfg2 {
- pins = "GPIO1", "GPIO3";
- ste,config = <&slpm_out_hi>;
- };
- };
- };
-
- uart2 {
- uart2_default_mode: uart2_default {
- default_mux {
- function = "u2";
- groups = "u2txrx_a_1";
- };
-
- default_cfg1 {
- pins = "GPIO120";
- ste,config = <&in_pu>;
- };
-
- default_cfg2 {
- pins = "GPIO121";
- ste,config = <&out_hi>;
- };
- };
-
- uart2_sleep_mode: uart2_sleep {
- sleep_cfg1 {
- pins = "GPIO120";
- ste,config = <&slpm_in_pu>;
- };
-
- sleep_cfg2 {
- pins = "GPIO121";
- ste,config = <&slpm_out_hi>;
- };
- };
- };
-
- i2c0 {
- i2c0_default_mux: i2c_mux {
- default_mux {
- function = "i2c0";
- groups = "i2c0_a_1";
- };
- };
-
- i2c0_default_mode: i2c_default {
- default_cfg1 {
- pins = "GPIO147", "GPIO148";
- ste,config = <&in_pu>;
- };
- };
-
- i2c0_sleep_mode: i2c_sleep {
- sleep_cfg1 {
- pins = "GPIO147", "GPIO148";
- ste,config = <&slpm_in_pu>;
- };
- };
- };
-
- i2c1 {
- i2c1_default_mux: i2c_mux {
- default_mux {
- function = "i2c1";
- groups = "i2c1_b_2";
- };
- };
-
- i2c1_default_mode: i2c_default {
- default_cfg1 {
- pins = "GPIO16", "GPIO17";
- ste,config = <&in_pu>;
- };
- };
-
- i2c1_sleep_mode: i2c_sleep {
- sleep_cfg1 {
- pins = "GPIO16", "GPIO17";
- ste,config = <&slpm_in_pu>;
- };
- };
- };
-
- i2c2 {
- i2c2_default_mux: i2c_mux {
- default_mux {
- function = "i2c2";
- groups = "i2c2_b_2";
- };
- };
-
- i2c2_default_mode: i2c_default {
- default_cfg1 {
- pins = "GPIO10", "GPIO11";
- ste,config = <&in_pu>;
- };
- };
-
- i2c2_sleep_mode: i2c_sleep {
- sleep_cfg1 {
- pins = "GPIO11", "GPIO11";
- ste,config = <&slpm_in_pu>;
- };
- };
- };
-
- i2c4 {
- i2c4_default_mux: i2c_mux {
- default_mux {
- function = "i2c4";
- groups = "i2c4_b_2";
- };
- };
-
- i2c4_default_mode: i2c_default {
- default_cfg1 {
- pins = "GPIO122", "GPIO123";
- ste,config = <&in_pu>;
- };
- };
-
- i2c4_sleep_mode: i2c_sleep {
- sleep_cfg1 {
- pins = "GPIO122", "GPIO123";
- ste,config = <&slpm_in_pu>;
- };
- };
- };
-
- i2c5 {
- i2c5_default_mux: i2c_mux {
- default_mux {
- function = "i2c5";
- groups = "i2c5_c_2";
- };
- };
-
- i2c5_default_mode: i2c_default {
- default_cfg1 {
- pins = "GPIO118", "GPIO119";
- ste,config = <&in_pu>;
- };
- };
-
- i2c5_sleep_mode: i2c_sleep {
- sleep_cfg1 {
- pins = "GPIO118", "GPIO119";
- ste,config = <&slpm_in_pu>;
- };
- };
- };
- };
- };
-};
diff --git a/arch/arm/boot/dts/ste-ccu8540.dts b/arch/arm/boot/dts/ste-ccu8540.dts
deleted file mode 100644
index 6eaaf638e52e..000000000000
--- a/arch/arm/boot/dts/ste-ccu8540.dts
+++ /dev/null
@@ -1,94 +0,0 @@
-/*
- * Copyright 2013 ST-Ericsson AB
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "ste-dbx5x0.dtsi"
-#include "ste-ccu8540-pinctrl.dtsi"
-
-/ {
- model = "ST-Ericsson U8540 platform with Device Tree";
- compatible = "st-ericsson,ccu8540", "st-ericsson,u8540";
-
- /* This stablilizes the serial port enumeration */
- aliases {
- serial0 = &ux500_serial0;
- serial1 = &ux500_serial1;
- serial2 = &ux500_serial2;
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x20000000 0x1f000000>, <0xc0000000 0x3f000000>;
- };
-
- soc {
- pinctrl {
- compatible = "stericsson,db8540-pinctrl";
- };
-
- prcmu@80157000 {
- reg = <0x80157000 0x2000>, <0x801b0000 0x8000>, <0x801b8000 0x3000>;
- reg-names = "prcmu", "prcmu-tcpm", "prcmu-tcdm";
- };
-
- uart@80120000 {
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&uart0_default_mux>, <&uart0_default_mode>;
- pinctrl-1 = <&uart0_sleep_mode>;
- status = "okay";
- };
-
- uart@80121000 {
- status = "okay";
- };
-
- uart@80007000 {
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&uart2_default_mode>;
- pinctrl-1 = <&uart2_sleep_mode>;
- status = "okay";
- };
-
- i2c0: i2c@80004000 {
- pinctrl-names = "default","sleep";
- pinctrl-0 = <&i2c0_default_mux>, <&i2c0_default_mode>;
- pinctrl-1 = <&i2c0_sleep_mode>;
- };
-
- i2c1: i2c@80122000 {
- pinctrl-names = "default","sleep";
- pinctrl-0 = <&i2c1_default_mux>, <&i2c1_default_mode>;
- pinctrl-1 = <&i2c1_sleep_mode>;
- };
-
- i2c2: i2c@80128000 {
- pinctrl-names = "default","sleep";
- pinctrl-0 = <&i2c2_default_mux>, <&i2c2_default_mode>;
- pinctrl-1 = <&i2c2_sleep_mode>;
- };
-
- i2c3: i2c@80110000 {
- status = "disabled";
- };
-
- i2c4: i2c@8012a000 {
- pinctrl-names = "default","sleep";
- pinctrl-0 = <&i2c4_default_mux>, <&i2c4_default_mode>;
- pinctrl-1 = <&i2c4_sleep_mode>;
- };
-
- i2c5: i2c@80001000 {
- pinctrl-names = "default","sleep";
- pinctrl-0 = <&i2c5_default_mux>, <&i2c5_default_mode>;
- pinctrl-1 = <&i2c5_sleep_mode>;
- };
- };
-};
diff --git a/arch/arm/boot/dts/ste-ccu9540.dts b/arch/arm/boot/dts/ste-ccu9540.dts
deleted file mode 100644
index b3b9bb8e1aa8..000000000000
--- a/arch/arm/boot/dts/ste-ccu9540.dts
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- * Copyright 2012 ST-Ericsson AB
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "ste-dbx5x0.dtsi"
-
-/ {
- model = "ST-Ericsson CCU9540 platform with Device Tree";
- compatible = "st-ericsson,ccu9540", "st-ericsson,u9540";
-
- /* This stablilizes the serial port enumeration */
- aliases {
- serial0 = &ux500_serial0;
- serial1 = &ux500_serial1;
- serial2 = &ux500_serial2;
- };
-
- memory {
- reg = <0x00000000 0x20000000>;
- };
-
- soc {
- uart@80120000 {
- status = "okay";
- };
-
- uart@80121000 {
- status = "okay";
- };
-
- uart@80007000 {
- status = "okay";
- };
-
- // External Micro SD slot
- sdi0_per1@80126000 {
- arm,primecell-periphid = <0x10480180>;
- max-frequency = <100000000>;
- bus-width = <4>;
- cap-sd-highspeed;
- cap-mmc-highspeed;
- vmmc-supply = <&ab8500_ldo_aux3_reg>;
-
- cd-gpios = <&gpio7 6 GPIO_ACTIVE_HIGH>; // 230
- cd-inverted;
-
- status = "okay";
- };
-
-
- // WLAN SDIO channel
- sdi1_per2@80118000 {
- arm,primecell-periphid = <0x10480180>;
- max-frequency = <100000000>;
- bus-width = <4>;
-
- status = "okay";
- };
-
- // On-board eMMC
- sdi4_per2@80114000 {
- arm,primecell-periphid = <0x10480180>;
- max-frequency = <100000000>;
- bus-width = <8>;
- cap-mmc-highspeed;
- vmmc-supply = <&ab8500_ldo_aux2_reg>;
-
- status = "okay";
- };
- };
-};
diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts
index ade1d0d4e5f4..b0b94d053098 100644
--- a/arch/arm/boot/dts/ste-snowball.dts
+++ b/arch/arm/boot/dts/ste-snowball.dts
@@ -46,35 +46,35 @@
#size-cells = <0>;
button@1 {
- debounce_interval = <50>;
+ debounce-interval = <50>;
wakeup-source;
linux,code = <2>;
label = "userpb";
gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
};
button@2 {
- debounce_interval = <50>;
+ debounce-interval = <50>;
wakeup-source;
linux,code = <3>;
label = "extkb1";
gpios = <&gpio4 23 GPIO_ACTIVE_HIGH>;
};
button@3 {
- debounce_interval = <50>;
+ debounce-interval = <50>;
wakeup-source;
linux,code = <4>;
label = "extkb2";
gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>;
};
button@4 {
- debounce_interval = <50>;
+ debounce-interval = <50>;
wakeup-source;
linux,code = <5>;
label = "extkb3";
gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
};
button@5 {
- debounce_interval = <50>;
+ debounce-interval = <50>;
wakeup-source;
linux,code = <6>;
label = "extkb4";
diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi
index f7362c31de29..9e29a4499938 100644
--- a/arch/arm/boot/dts/stih407-family.dtsi
+++ b/arch/arm/boot/dts/stih407-family.dtsi
@@ -206,19 +206,19 @@
vtg_main: sti-vtg-main@8d02800 {
compatible = "st,vtg";
reg = <0x8d02800 0x200>;
- interrupts = <GIC_SPI 108 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
};
vtg_aux: sti-vtg-aux@8d00200 {
compatible = "st,vtg";
reg = <0x8d00200 0x100>;
- interrupts = <GIC_SPI 109 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
};
serial@9830000 {
compatible = "st,asc";
reg = <0x9830000 0x2c>;
- interrupts = <GIC_SPI 122 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
/* Pinctrl moved out to a per-board configuration */
@@ -228,7 +228,7 @@
serial@9831000 {
compatible = "st,asc";
reg = <0x9831000 0x2c>;
- interrupts = <GIC_SPI 123 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_serial1>;
clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
@@ -239,7 +239,7 @@
serial@9832000 {
compatible = "st,asc";
reg = <0x9832000 0x2c>;
- interrupts = <GIC_SPI 124 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_serial2>;
clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
@@ -251,7 +251,7 @@
sbc_serial0: serial@9530000 {
compatible = "st,asc";
reg = <0x9530000 0x2c>;
- interrupts = <GIC_SPI 138 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sbc_serial0>;
clocks = <&clk_sysin>;
@@ -262,7 +262,7 @@
serial@9531000 {
compatible = "st,asc";
reg = <0x9531000 0x2c>;
- interrupts = <GIC_SPI 139 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sbc_serial1>;
clocks = <&clk_sysin>;
@@ -574,7 +574,7 @@
status = "disabled";
reg = <0x09060000 0x7ff>, <0x9061008 0x20>;
reg-names = "mmc", "top-mmc-delay";
- interrupts = <GIC_SPI 92 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "mmcirq";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mmc0>;
@@ -589,7 +589,7 @@
status = "disabled";
reg = <0x09080000 0x7ff>;
reg-names = "mmc";
- interrupts = <GIC_SPI 90 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "mmcirq";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sd1>;
@@ -623,7 +623,7 @@
compatible = "st,ahci";
reg = <0x9b20000 0x1000>;
- interrupts = <GIC_SPI 159 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hostc";
phys = <&phy_port0 PHY_TYPE_SATA>;
@@ -646,7 +646,7 @@
compatible = "st,ahci";
reg = <0x9b28000 0x1000>;
- interrupts = <GIC_SPI 170 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hostc";
phys = <&phy_port1 PHY_TYPE_SATA>;
@@ -687,7 +687,7 @@
dwc3: dwc3@9900000 {
compatible = "snps,dwc3";
reg = <0x09900000 0x100000>;
- interrupts = <GIC_SPI 155 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
dr_mode = "host";
phy-names = "usb2-phy", "usb3-phy";
phys = <&usb2_picophy0>,
@@ -701,7 +701,7 @@
compatible = "st,sti-pwm";
#pwm-cells = <2>;
reg = <0x9810000 0x68>;
- interrupts = <GIC_SPI 128 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm0_chan0_default>;
clock-names = "pwm";
@@ -716,7 +716,7 @@
compatible = "st,sti-pwm";
#pwm-cells = <2>;
reg = <0x9510000 0x68>;
- interrupts = <GIC_SPI 131 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm1_chan0_default
&pinctrl_pwm1_chan1_default
@@ -755,8 +755,8 @@
resets = <&softreset STIH407_ETH1_SOFTRESET>;
reset-names = "stmmaceth";
- interrupts = <GIC_SPI 98 IRQ_TYPE_NONE>,
- <GIC_SPI 99 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "macirq", "eth_wake_irq";
/* DMA Bus Mode */
@@ -787,7 +787,7 @@
mailbox0: mailbox@8f00000 {
compatible = "st,stih407-mailbox";
reg = <0x8f00000 0x1000>;
- interrupts = <GIC_SPI 1 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
#mbox-cells = <2>;
mbox-name = "a9";
status = "okay";
@@ -857,7 +857,7 @@
<&clk_s_c0_flexgen CLK_EXT2F_A9>,
<&clk_s_c0_flexgen CLK_EXT2F_A9>,
<&clk_s_c0_flexgen CLK_EXT2F_A9>;
- interrupts = <GIC_SPI 5 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
dma-channels = <16>;
#dma-cells = <3>;
};
@@ -875,7 +875,7 @@
<&clk_s_c0_flexgen CLK_TX_ICN_DMU>,
<&clk_s_c0_flexgen CLK_EXT2F_A9>;
- interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
dma-channels = <16>;
#dma-cells = <3>;
@@ -890,7 +890,7 @@
<0x8e77000 0x1000>,
<0x8e78000 0x8000>;
reg-names = "slimcore", "dmem", "peripherals", "imem";
- interrupts = <GIC_SPI 9 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
dma-channels = <16>;
#dma-cells = <3>;
clocks = <&clk_s_c0_flexgen CLK_FDMA>,
@@ -910,7 +910,7 @@
assigned-clock-parents = <0>, <&clk_s_d0_quadfs 0>;
assigned-clock-rates = <50000000>;
reg = <0x8d80000 0x158>;
- interrupts = <GIC_SPI 84 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&fdma0 2 0 1>;
dma-names = "tx";
@@ -926,7 +926,7 @@
assigned-clock-parents = <0>, <&clk_s_d0_quadfs 1>;
assigned-clock-rates = <50000000>;
reg = <0x8d81000 0x158>;
- interrupts = <GIC_SPI 85 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&fdma0 3 0 1>;
dma-names = "tx";
@@ -942,7 +942,7 @@
assigned-clock-parents = <0>, <&clk_s_d0_quadfs 2>;
assigned-clock-rates = <50000000>;
reg = <0x8d82000 0x158>;
- interrupts = <GIC_SPI 86 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&fdma0 4 0 1>;
dma-names = "tx";
@@ -958,7 +958,7 @@
assigned-clock-parents = <0>, <&clk_s_d0_quadfs 3>;
assigned-clock-rates = <50000000>;
reg = <0x8d85000 0x158>;
- interrupts = <GIC_SPI 89 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&fdma0 7 0 1>;
dma-names = "tx";
@@ -970,7 +970,7 @@
#sound-dai-cells = <0>;
st,syscfg = <&syscfg_core>;
reg = <0x8d83000 0x158>;
- interrupts = <GIC_SPI 87 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&fdma0 5 0 1>;
dma-names = "rx";
@@ -982,7 +982,7 @@
#sound-dai-cells = <0>;
st,syscfg = <&syscfg_core>;
reg = <0x8d84000 0x158>;
- interrupts = <GIC_SPI 88 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&fdma0 6 0 1>;
dma-names = "rx";
diff --git a/arch/arm/boot/dts/stih407-pinctrl.dtsi b/arch/arm/boot/dts/stih407-pinctrl.dtsi
index 53c6888d1fc0..e393519fb84c 100644
--- a/arch/arm/boot/dts/stih407-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stih407-pinctrl.dtsi
@@ -52,7 +52,7 @@
st,syscfg = <&syscfg_sbc>;
reg = <0x0961f080 0x4>;
reg-names = "irqmux";
- interrupts = <GIC_SPI 188 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "irqmux";
ranges = <0 0x09610000 0x6000>;
@@ -376,7 +376,7 @@
st,syscfg = <&syscfg_front>;
reg = <0x0920f080 0x4>;
reg-names = "irqmux";
- interrupts = <GIC_SPI 189 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "irqmux";
ranges = <0 0x09200000 0x10000>;
@@ -936,7 +936,7 @@
st,syscfg = <&syscfg_front>;
reg = <0x0921f080 0x4>;
reg-names = "irqmux";
- interrupts = <GIC_SPI 190 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "irqmux";
ranges = <0 0x09210000 0x10000>;
@@ -969,7 +969,7 @@
st,syscfg = <&syscfg_rear>;
reg = <0x0922f080 0x4>;
reg-names = "irqmux";
- interrupts = <GIC_SPI 191 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "irqmux";
ranges = <0 0x09220000 0x6000>;
@@ -1164,7 +1164,7 @@
st,syscfg = <&syscfg_flash>;
reg = <0x0923f080 0x4>;
reg-names = "irqmux";
- interrupts = <GIC_SPI 192 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "irqmux";
ranges = <0 0x09230000 0x3000>;
diff --git a/arch/arm/boot/dts/stih407.dtsi b/arch/arm/boot/dts/stih407.dtsi
index 57efc87dec2b..5b7951ffc350 100644
--- a/arch/arm/boot/dts/stih407.dtsi
+++ b/arch/arm/boot/dts/stih407.dtsi
@@ -108,7 +108,7 @@
reg = <0x8d04000 0x1000>;
reg-names = "hdmi-reg";
#sound-dai-cells = <0>;
- interrupts = <GIC_SPI 106 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "irq";
clock-names = "pix",
"tmds",
diff --git a/arch/arm/boot/dts/stih410.dtsi b/arch/arm/boot/dts/stih410.dtsi
index 3313005ee15c..888548ea9b5c 100644
--- a/arch/arm/boot/dts/stih410.dtsi
+++ b/arch/arm/boot/dts/stih410.dtsi
@@ -43,7 +43,7 @@
ohci0: usb@9a03c00 {
compatible = "st,st-ohci-300x";
reg = <0x9a03c00 0x100>;
- interrupts = <GIC_SPI 180 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
<&clk_s_c0_flexgen CLK_RX_ICN_DISP_0>;
resets = <&powerdown STIH407_USB2_PORT0_POWERDOWN>,
@@ -58,7 +58,7 @@
ehci0: usb@9a03e00 {
compatible = "st,st-ehci-300x";
reg = <0x9a03e00 0x100>;
- interrupts = <GIC_SPI 151 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb0>;
clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
@@ -75,7 +75,7 @@
ohci1: usb@9a83c00 {
compatible = "st,st-ohci-300x";
reg = <0x9a83c00 0x100>;
- interrupts = <GIC_SPI 181 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
<&clk_s_c0_flexgen CLK_RX_ICN_DISP_0>;
resets = <&powerdown STIH407_USB2_PORT1_POWERDOWN>,
@@ -90,7 +90,7 @@
ehci1: usb@9a83e00 {
compatible = "st,st-ehci-300x";
reg = <0x9a83e00 0x100>;
- interrupts = <GIC_SPI 153 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb1>;
clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
@@ -202,7 +202,7 @@
reg = <0x8d04000 0x1000>;
reg-names = "hdmi-reg";
#sound-dai-cells = <0>;
- interrupts = <GIC_SPI 106 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "irq";
clock-names = "pix",
"tmds",
@@ -254,7 +254,7 @@
bdisp0:bdisp@9f10000 {
compatible = "st,stih407-bdisp";
reg = <0x9f10000 0x1000>;
- interrupts = <GIC_SPI 38 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "bdisp";
clocks = <&clk_s_c0_flexgen CLK_IC_BDISP_0>;
};
@@ -263,8 +263,8 @@
compatible = "st,st-hva";
reg = <0x8c85000 0x400>, <0x6000000 0x40000>;
reg-names = "hva_registers", "hva_esram";
- interrupts = <GIC_SPI 58 IRQ_TYPE_NONE>,
- <GIC_SPI 59 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "clk_hva";
clocks = <&clk_s_c0_flexgen CLK_HVA>;
};
@@ -292,7 +292,7 @@
reg = <0x94a087c 0x64>;
clocks = <&clk_sysin>;
clock-names = "cec-clk";
- interrupts = <GIC_SPI 140 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "cec-irq";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_cec0_default>;
diff --git a/arch/arm/boot/dts/stihxxx-b2120.dtsi b/arch/arm/boot/dts/stihxxx-b2120.dtsi
index c67edb1a8121..4dedfcb0fcb3 100644
--- a/arch/arm/boot/dts/stihxxx-b2120.dtsi
+++ b/arch/arm/boot/dts/stihxxx-b2120.dtsi
@@ -154,8 +154,8 @@
reg = <0x08a20000 0x10000>,
<0x08a00000 0x4000>;
reg-names = "c8sectpfe", "c8sectpfe-ram";
- interrupts = <GIC_SPI 34 IRQ_TYPE_NONE>,
- <GIC_SPI 35 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "c8sectpfe-error-irq",
"c8sectpfe-idle-irq";
pinctrl-0 = <&pinctrl_tsin0_serial>;
diff --git a/arch/arm/boot/dts/stm32f469-disco.dts b/arch/arm/boot/dts/stm32f469-disco.dts
index 2f76726bf335..3ee768cb86fc 100644
--- a/arch/arm/boot/dts/stm32f469-disco.dts
+++ b/arch/arm/boot/dts/stm32f469-disco.dts
@@ -46,7 +46,7 @@
*/
/dts-v1/;
-#include "stm32f429.dtsi"
+#include "stm32f469.dtsi"
#include "stm32f469-pinctrl.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
@@ -112,7 +112,7 @@
vcc5v_otg: vcc5v-otg-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpiob 2 0>;
+ gpio = <&gpiob 2 GPIO_ACTIVE_HIGH>;
regulator-name = "vcc5_host1";
regulator-always-on;
};
@@ -126,6 +126,55 @@
clock-frequency = <8000000>;
};
+&dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dsi_in: endpoint {
+ remote-endpoint = <&ltdc_out_dsi>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dsi_out: endpoint {
+ remote-endpoint = <&dsi_panel_in>;
+ };
+ };
+ };
+
+ panel-dsi@0 {
+ compatible = "orisetech,otm8009a";
+ reg = <0>; /* dsi virtual channel (0..3) */
+ reset-gpios = <&gpioh 7 GPIO_ACTIVE_LOW>;
+ status = "okay";
+
+ port {
+ dsi_panel_in: endpoint {
+ remote-endpoint = <&dsi_out>;
+ };
+ };
+ };
+};
+
+&ltdc {
+ dma-ranges;
+ status = "okay";
+
+ port {
+ ltdc_out_dsi: endpoint@0 {
+ remote-endpoint = <&dsi_in>;
+ };
+ };
+};
+
&rtc {
status = "okay";
};
diff --git a/arch/arm/boot/dts/stm32f469.dtsi b/arch/arm/boot/dts/stm32f469.dtsi
new file mode 100644
index 000000000000..5ae5213f68cb
--- /dev/null
+++ b/arch/arm/boot/dts/stm32f469.dtsi
@@ -0,0 +1,19 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */
+/* Copyright (C) STMicroelectronics 2017 - All Rights Reserved */
+
+#include "stm32f429.dtsi"
+
+/ {
+ soc {
+ dsi: dsi@40016c00 {
+ compatible = "st,stm32-dsi";
+ reg = <0x40016c00 0x800>;
+ interrupts = <92>;
+ resets = <&rcc STM32F4_APB2_RESET(DSI)>;
+ reset-names = "apb";
+ clocks = <&rcc 1 CLK_F469_DSI>, <&clk_hse>;
+ clock-names = "pclk", "ref";
+ status = "disabled";
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/stm32f746-disco.dts b/arch/arm/boot/dts/stm32f746-disco.dts
index be94c6ad7e94..f9ad71f7c807 100644
--- a/arch/arm/boot/dts/stm32f746-disco.dts
+++ b/arch/arm/boot/dts/stm32f746-disco.dts
@@ -90,6 +90,14 @@
clock-frequency = <25000000>;
};
+&i2c1 {
+ pinctrl-0 = <&i2c1_pins_b>;
+ pinctrl-names = "default";
+ i2c-scl-rising-time-ns = <185>;
+ i2c-scl-falling-time-ns = <20>;
+ status = "okay";
+};
+
&sdio1 {
status = "okay";
vmmc-supply = <&mmc_vcard>;
diff --git a/arch/arm/boot/dts/stm32f746.dtsi b/arch/arm/boot/dts/stm32f746.dtsi
index 4be2ee575b19..1479e3eb05fa 100644
--- a/arch/arm/boot/dts/stm32f746.dtsi
+++ b/arch/arm/boot/dts/stm32f746.dtsi
@@ -345,6 +345,42 @@
status = "disabled";
};
+ i2c2: i2c@40005800 {
+ compatible = "st,stm32f7-i2c";
+ reg = <0x40005800 0x400>;
+ interrupts = <33>,
+ <34>;
+ resets = <&rcc STM32F7_APB1_RESET(I2C2)>;
+ clocks = <&rcc 1 CLK_I2C2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@40005C00 {
+ compatible = "st,stm32f7-i2c";
+ reg = <0x40005C00 0x400>;
+ interrupts = <72>,
+ <73>;
+ resets = <&rcc STM32F7_APB1_RESET(I2C3)>;
+ clocks = <&rcc 1 CLK_I2C3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c4: i2c@40006000 {
+ compatible = "st,stm32f7-i2c";
+ reg = <0x40006000 0x400>;
+ interrupts = <95>,
+ <96>;
+ resets = <&rcc STM32F7_APB1_RESET(I2C4)>;
+ clocks = <&rcc 1 CLK_I2C4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
cec: cec@40006c00 {
compatible = "st,stm32-cec";
reg = <0x40006C00 0x400>;
diff --git a/arch/arm/boot/dts/stm32f769-disco.dts b/arch/arm/boot/dts/stm32f769-disco.dts
index 2241eecdabfe..677276ba4dbe 100644
--- a/arch/arm/boot/dts/stm32f769-disco.dts
+++ b/arch/arm/boot/dts/stm32f769-disco.dts
@@ -111,6 +111,14 @@
clock-frequency = <25000000>;
};
+&i2c1 {
+ pinctrl-0 = <&i2c1_pins_b>;
+ pinctrl-names = "default";
+ i2c-scl-rising-time-ns = <185>;
+ i2c-scl-falling-time-ns = <20>;
+ status = "okay";
+};
+
&rtc {
status = "okay";
};
diff --git a/arch/arm/boot/dts/stm32h743-pinctrl.dtsi b/arch/arm/boot/dts/stm32h743-pinctrl.dtsi
index 0f15dfb98381..24be8e63dec8 100644
--- a/arch/arm/boot/dts/stm32h743-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32h743-pinctrl.dtsi
@@ -163,6 +163,16 @@
#interrupt-cells = <2>;
};
+ i2c1_pins_a: i2c1@0 {
+ pins {
+ pinmux = <STM32_PINMUX('B', 6, AF4)>, /* I2C1_SCL */
+ <STM32_PINMUX('B', 7, AF4)>; /* I2C1_SDA */
+ bias-disable;
+ drive-open-drain;
+ slew-rate = <0>;
+ };
+ };
+
usart1_pins: usart1@0 {
pins1 {
pinmux = <STM32_PINMUX('B', 14, AF4)>; /* USART1_TX */
diff --git a/arch/arm/boot/dts/stm32h743.dtsi b/arch/arm/boot/dts/stm32h743.dtsi
index 2bb103e1194d..637beffe5067 100644
--- a/arch/arm/boot/dts/stm32h743.dtsi
+++ b/arch/arm/boot/dts/stm32h743.dtsi
@@ -86,6 +86,7 @@
pwm {
compatible = "st,stm32-pwm-lp";
+ #pwm-cells = <3>;
status = "disabled";
};
@@ -130,6 +131,42 @@
clocks = <&rcc USART2_CK>;
};
+ i2c1: i2c@40005400 {
+ compatible = "st,stm32f7-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x40005400 0x400>;
+ interrupts = <31>,
+ <32>;
+ resets = <&rcc STM32H7_APB1L_RESET(I2C1)>;
+ clocks = <&rcc I2C1_CK>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@40005800 {
+ compatible = "st,stm32f7-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x40005800 0x400>;
+ interrupts = <33>,
+ <34>;
+ resets = <&rcc STM32H7_APB1L_RESET(I2C2)>;
+ clocks = <&rcc I2C2_CK>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@40005C00 {
+ compatible = "st,stm32f7-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x40005C00 0x400>;
+ interrupts = <72>,
+ <73>;
+ resets = <&rcc STM32H7_APB1L_RESET(I2C3)>;
+ clocks = <&rcc I2C3_CK>;
+ status = "disabled";
+ };
+
dac: dac@40007400 {
compatible = "st,stm32h7-dac-core";
reg = <0x40007400 0x400>;
@@ -323,6 +360,18 @@
status = "disabled";
};
+ i2c4: i2c@58001C00 {
+ compatible = "st,stm32f7-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x58001C00 0x400>;
+ interrupts = <95>,
+ <96>;
+ resets = <&rcc STM32H7_APB4_RESET(I2C4)>;
+ clocks = <&rcc I2C4_CK>;
+ status = "disabled";
+ };
+
lptimer2: timer@58002400 {
#address-cells = <1>;
#size-cells = <0>;
@@ -334,6 +383,7 @@
pwm {
compatible = "st,stm32-pwm-lp";
+ #pwm-cells = <3>;
status = "disabled";
};
@@ -360,6 +410,7 @@
pwm {
compatible = "st,stm32-pwm-lp";
+ #pwm-cells = <3>;
status = "disabled";
};
@@ -381,6 +432,7 @@
pwm {
compatible = "st,stm32-pwm-lp";
+ #pwm-cells = <3>;
status = "disabled";
};
};
@@ -396,6 +448,7 @@
pwm {
compatible = "st,stm32-pwm-lp";
+ #pwm-cells = <3>;
status = "disabled";
};
};
diff --git a/arch/arm/boot/dts/stm32h743i-eval.dts b/arch/arm/boot/dts/stm32h743i-eval.dts
index c7187e18ea16..3f8e0c4a998d 100644
--- a/arch/arm/boot/dts/stm32h743i-eval.dts
+++ b/arch/arm/boot/dts/stm32h743i-eval.dts
@@ -92,6 +92,14 @@
clock-frequency = <25000000>;
};
+&i2c1 {
+ pinctrl-0 = <&i2c1_pins_a>;
+ pinctrl-names = "default";
+ i2c-scl-rising-time-ns = <185>;
+ i2c-scl-falling-time-ns = <20>;
+ status = "okay";
+};
+
&rtc {
status = "okay";
};
diff --git a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
index eb96ac3e6c1d..4839db146890 100644
--- a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
@@ -7,7 +7,7 @@
/ {
soc {
- pinctrl: pin-controller {
+ pinctrl: pin-controller@50002000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,stm32mp157-pinctrl";
@@ -22,7 +22,7 @@
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x0 0x400>;
- clocks = <&clk_pll3_p>;
+ clocks = <&rcc GPIOA>;
st,bank-name = "GPIOA";
ngpios = <16>;
gpio-ranges = <&pinctrl 0 0 16>;
@@ -34,7 +34,7 @@
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x1000 0x400>;
- clocks = <&clk_pll3_p>;
+ clocks = <&rcc GPIOB>;
st,bank-name = "GPIOB";
ngpios = <16>;
gpio-ranges = <&pinctrl 0 16 16>;
@@ -46,7 +46,7 @@
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x2000 0x400>;
- clocks = <&clk_pll3_p>;
+ clocks = <&rcc GPIOC>;
st,bank-name = "GPIOC";
ngpios = <16>;
gpio-ranges = <&pinctrl 0 32 16>;
@@ -58,7 +58,7 @@
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x3000 0x400>;
- clocks = <&clk_pll3_p>;
+ clocks = <&rcc GPIOD>;
st,bank-name = "GPIOD";
ngpios = <16>;
gpio-ranges = <&pinctrl 0 48 16>;
@@ -70,7 +70,7 @@
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x4000 0x400>;
- clocks = <&clk_pll3_p>;
+ clocks = <&rcc GPIOE>;
st,bank-name = "GPIOE";
ngpios = <16>;
gpio-ranges = <&pinctrl 0 64 16>;
@@ -82,7 +82,7 @@
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x5000 0x400>;
- clocks = <&clk_pll3_p>;
+ clocks = <&rcc GPIOF>;
st,bank-name = "GPIOF";
ngpios = <16>;
gpio-ranges = <&pinctrl 0 80 16>;
@@ -94,7 +94,7 @@
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x6000 0x400>;
- clocks = <&clk_pll3_p>;
+ clocks = <&rcc GPIOG>;
st,bank-name = "GPIOG";
ngpios = <16>;
gpio-ranges = <&pinctrl 0 96 16>;
@@ -106,7 +106,7 @@
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x7000 0x400>;
- clocks = <&clk_pll3_p>;
+ clocks = <&rcc GPIOH>;
st,bank-name = "GPIOH";
ngpios = <16>;
gpio-ranges = <&pinctrl 0 112 16>;
@@ -118,7 +118,7 @@
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x8000 0x400>;
- clocks = <&clk_pll3_p>;
+ clocks = <&rcc GPIOI>;
st,bank-name = "GPIOI";
ngpios = <16>;
gpio-ranges = <&pinctrl 0 128 16>;
@@ -130,7 +130,7 @@
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x9000 0x400>;
- clocks = <&clk_pll3_p>;
+ clocks = <&rcc GPIOJ>;
st,bank-name = "GPIOJ";
ngpios = <16>;
gpio-ranges = <&pinctrl 0 144 16>;
@@ -142,13 +142,124 @@
interrupt-controller;
#interrupt-cells = <2>;
reg = <0xa000 0x400>;
- clocks = <&clk_pll3_p>;
+ clocks = <&rcc GPIOK>;
st,bank-name = "GPIOK";
ngpios = <8>;
gpio-ranges = <&pinctrl 0 160 8>;
};
- uart4_pins_a: uart4@0 {
+ cec_pins_a: cec-0 {
+ pins {
+ pinmux = <STM32_PINMUX('A', 15, AF4)>;
+ bias-disable;
+ drive-open-drain;
+ slew-rate = <0>;
+ };
+ };
+
+ i2c1_pins_a: i2c1-0 {
+ pins {
+ pinmux = <STM32_PINMUX('D', 12, AF5)>, /* I2C1_SCL */
+ <STM32_PINMUX('F', 15, AF5)>; /* I2C1_SDA */
+ bias-disable;
+ drive-open-drain;
+ slew-rate = <0>;
+ };
+ };
+
+ i2c2_pins_a: i2c2-0 {
+ pins {
+ pinmux = <STM32_PINMUX('H', 4, AF4)>, /* I2C2_SCL */
+ <STM32_PINMUX('H', 5, AF4)>; /* I2C2_SDA */
+ bias-disable;
+ drive-open-drain;
+ slew-rate = <0>;
+ };
+ };
+
+ i2c5_pins_a: i2c5-0 {
+ pins {
+ pinmux = <STM32_PINMUX('A', 11, AF4)>, /* I2C5_SCL */
+ <STM32_PINMUX('A', 12, AF4)>; /* I2C5_SDA */
+ bias-disable;
+ drive-open-drain;
+ slew-rate = <0>;
+ };
+ };
+
+ pwm2_pins_a: pwm2-0 {
+ pins {
+ pinmux = <STM32_PINMUX('A', 3, AF1)>; /* TIM2_CH4 */
+ bias-pull-down;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ };
+
+ pwm8_pins_a: pwm8-0 {
+ pins {
+ pinmux = <STM32_PINMUX('I', 2, AF3)>; /* TIM8_CH4 */
+ bias-pull-down;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ };
+
+ pwm12_pins_a: pwm12-0 {
+ pins {
+ pinmux = <STM32_PINMUX('H', 6, AF2)>; /* TIM12_CH1 */
+ bias-pull-down;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ };
+
+ qspi_clk_pins_a: qspi-clk-0 {
+ pins {
+ pinmux = <STM32_PINMUX('F', 10, AF9)>; /* QSPI_CLK */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <3>;
+ };
+ };
+
+ qspi_bk1_pins_a: qspi-bk1-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('F', 8, AF10)>, /* QSPI_BK1_IO0 */
+ <STM32_PINMUX('F', 9, AF10)>, /* QSPI_BK1_IO1 */
+ <STM32_PINMUX('F', 7, AF9)>, /* QSPI_BK1_IO2 */
+ <STM32_PINMUX('F', 6, AF9)>; /* QSPI_BK1_IO3 */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <3>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('B', 6, AF10)>; /* QSPI_BK1_NCS */
+ bias-pull-up;
+ drive-push-pull;
+ slew-rate = <3>;
+ };
+ };
+
+ qspi_bk2_pins_a: qspi-bk2-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('H', 2, AF9)>, /* QSPI_BK2_IO0 */
+ <STM32_PINMUX('H', 3, AF9)>, /* QSPI_BK2_IO1 */
+ <STM32_PINMUX('G', 10, AF11)>, /* QSPI_BK2_IO2 */
+ <STM32_PINMUX('G', 7, AF11)>; /* QSPI_BK2_IO3 */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <3>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('C', 0, AF10)>; /* QSPI_BK2_NCS */
+ bias-pull-up;
+ drive-push-pull;
+ slew-rate = <3>;
+ };
+ };
+
+ uart4_pins_a: uart4-0 {
pins1 {
pinmux = <STM32_PINMUX('G', 11, AF6)>; /* UART4_TX */
bias-disable;
@@ -162,7 +273,7 @@
};
};
- pinctrl_z: pin-controller-z {
+ pinctrl_z: pin-controller-z@54004000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,stm32mp157-z-pinctrl";
@@ -178,12 +289,22 @@
interrupt-controller;
#interrupt-cells = <2>;
reg = <0 0x400>;
- clocks = <&clk_pll2_p>;
+ clocks = <&rcc GPIOZ>;
st,bank-name = "GPIOZ";
st,bank-ioport = <11>;
ngpios = <8>;
gpio-ranges = <&pinctrl_z 0 400 8>;
};
+
+ i2c4_pins_a: i2c4-0 {
+ pins {
+ pinmux = <STM32_PINMUX('Z', 4, AF6)>, /* I2C4_SCL */
+ <STM32_PINMUX('Z', 5, AF6)>; /* I2C4_SDA */
+ bias-disable;
+ drive-open-drain;
+ slew-rate = <0>;
+ };
+ };
};
};
};
diff --git a/arch/arm/boot/dts/stm32mp157c-ed1.dts b/arch/arm/boot/dts/stm32mp157c-ed1.dts
index 9f90337a22e3..ae336530b59b 100644
--- a/arch/arm/boot/dts/stm32mp157c-ed1.dts
+++ b/arch/arm/boot/dts/stm32mp157c-ed1.dts
@@ -16,13 +16,56 @@
stdout-path = "serial0:115200n8";
};
- memory {
+ memory@c0000000 {
reg = <0xC0000000 0x40000000>;
};
aliases {
serial0 = &uart4;
};
+
+ reg11: reg11 {
+ compatible = "regulator-fixed";
+ regulator-name = "reg11";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ };
+
+ reg18: reg18 {
+ compatible = "regulator-fixed";
+ regulator-name = "reg18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ vdd_usb: vdd-usb {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_usb";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+};
+
+&rng1 {
+ status = "okay";
+};
+
+&timers6 {
+ status = "okay";
+ timer@5 {
+ status = "okay";
+ };
+};
+
+&i2c4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c4_pins_a>;
+ i2c-scl-rising-time-ns = <185>;
+ i2c-scl-falling-time-ns = <20>;
+ status = "okay";
};
&uart4 {
@@ -30,3 +73,15 @@
pinctrl-0 = <&uart4_pins_a>;
status = "okay";
};
+
+&usbphyc_port0 {
+ phy-supply = <&vdd_usb>;
+ vdda1v1-supply = <&reg11>;
+ vdda1v8-supply = <&reg18>;
+};
+
+&usbphyc_port1 {
+ phy-supply = <&vdd_usb>;
+ vdda1v1-supply = <&reg11>;
+ vdda1v8-supply = <&reg18>;
+};
diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts
index 57e6dbc52e09..9382d8063031 100644
--- a/arch/arm/boot/dts/stm32mp157c-ev1.dts
+++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts
@@ -19,3 +19,90 @@
serial0 = &uart4;
};
};
+
+&cec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cec_pins_a>;
+ status = "okay";
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins_a>;
+ i2c-scl-rising-time-ns = <185>;
+ i2c-scl-falling-time-ns = <20>;
+ status = "okay";
+};
+
+&i2c5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c5_pins_a>;
+ i2c-scl-rising-time-ns = <185>;
+ i2c-scl-falling-time-ns = <20>;
+ status = "okay";
+};
+
+&qspi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a &qspi_bk2_pins_a>;
+ reg = <0x58003000 0x1000>, <0x70000000 0x4000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ flash0: mx66l51235l@0 {
+ reg = <0>;
+ spi-rx-bus-width = <4>;
+ spi-max-frequency = <108000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+
+ flash1: mx66l51235l@1 {
+ reg = <1>;
+ spi-rx-bus-width = <4>;
+ spi-max-frequency = <108000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+};
+
+&timers2 {
+ status = "disabled";
+ pwm {
+ pinctrl-0 = <&pwm2_pins_a>;
+ pinctrl-names = "default";
+ status = "okay";
+ };
+ timer@1 {
+ status = "okay";
+ };
+};
+
+&timers8 {
+ status = "disabled";
+ pwm {
+ pinctrl-0 = <&pwm8_pins_a>;
+ pinctrl-names = "default";
+ status = "okay";
+ };
+ timer@7 {
+ status = "okay";
+ };
+};
+
+&timers12 {
+ status = "disabled";
+ pwm {
+ pinctrl-0 = <&pwm12_pins_a>;
+ pinctrl-names = "default";
+ status = "okay";
+ };
+ timer@11 {
+ status = "okay";
+ };
+};
+
+&usbphyc {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/stm32mp157c.dtsi b/arch/arm/boot/dts/stm32mp157c.dtsi
index 4fa0df853c8a..7d1753893453 100644
--- a/arch/arm/boot/dts/stm32mp157c.dtsi
+++ b/arch/arm/boot/dts/stm32mp157c.dtsi
@@ -4,6 +4,8 @@
* Author: Ludovic Barre <ludovic.barre@st.com> for STMicroelectronics.
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/stm32mp1-clks.h>
+#include <dt-bindings/reset/stm32mp1-resets.h>
/ {
#address-cells = <1>;
@@ -71,12 +73,6 @@
clock-frequency = <24000000>;
};
- clk_pll_per: clk-pll-per {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <64000000>;
- };
-
clk_hsi: clk-hsi {
#clock-cells = <0>;
compatible = "fixed-clock";
@@ -100,24 +96,6 @@
compatible = "fixed-clock";
clock-frequency = <4000000>;
};
-
- clk_pclk1: clk-pclk1 {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <86000000>;
- };
-
- clk_pll3_p: clk-pll3_p {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <172000000>;
- };
-
- clk_pll2_p: clk-pll2_p {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <264000000>;
- };
};
soc {
@@ -127,60 +105,506 @@
interrupt-parent = <&intc>;
ranges;
+ timers2: timer@40000000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40000000 0x400>;
+ clocks = <&rcc TIM2_K>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+
+ timer@1 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <1>;
+ status = "disabled";
+ };
+ };
+
+ timers3: timer@40001000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40001000 0x400>;
+ clocks = <&rcc TIM3_K>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+
+ timer@2 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <2>;
+ status = "disabled";
+ };
+ };
+
+ timers4: timer@40002000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40002000 0x400>;
+ clocks = <&rcc TIM4_K>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+
+ timer@3 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <3>;
+ status = "disabled";
+ };
+ };
+
+ timers5: timer@40003000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40003000 0x400>;
+ clocks = <&rcc TIM5_K>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+
+ timer@4 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <4>;
+ status = "disabled";
+ };
+ };
+
+ timers6: timer@40004000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40004000 0x400>;
+ clocks = <&rcc TIM6_K>;
+ clock-names = "int";
+ status = "disabled";
+
+ timer@5 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <5>;
+ status = "disabled";
+ };
+ };
+
+ timers7: timer@40005000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40005000 0x400>;
+ clocks = <&rcc TIM7_K>;
+ clock-names = "int";
+ status = "disabled";
+
+ timer@6 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <6>;
+ status = "disabled";
+ };
+ };
+
+ timers12: timer@40006000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40006000 0x400>;
+ clocks = <&rcc TIM12_K>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+
+ timer@11 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <11>;
+ status = "disabled";
+ };
+ };
+
+ timers13: timer@40007000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40007000 0x400>;
+ clocks = <&rcc TIM13_K>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+
+ timer@12 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <12>;
+ status = "disabled";
+ };
+ };
+
+ timers14: timer@40008000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40008000 0x400>;
+ clocks = <&rcc TIM14_K>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+
+ timer@13 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <13>;
+ status = "disabled";
+ };
+ };
+
+ lptimer1: timer@40009000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-lptimer";
+ reg = <0x40009000 0x400>;
+ clocks = <&rcc LPTIM1_K>;
+ clock-names = "mux";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm-lp";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ trigger@0 {
+ compatible = "st,stm32-lptimer-trigger";
+ reg = <0>;
+ status = "disabled";
+ };
+
+ counter {
+ compatible = "st,stm32-lptimer-counter";
+ status = "disabled";
+ };
+ };
+
usart2: serial@4000e000 {
compatible = "st,stm32h7-uart";
reg = <0x4000e000 0x400>;
- interrupts = <GIC_SPI 38 IRQ_TYPE_NONE>;
- clocks = <&clk_pclk1>;
+ interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc USART2_K>;
status = "disabled";
};
usart3: serial@4000f000 {
compatible = "st,stm32h7-uart";
reg = <0x4000f000 0x400>;
- interrupts = <GIC_SPI 39 IRQ_TYPE_NONE>;
- clocks = <&clk_pclk1>;
+ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc USART3_K>;
status = "disabled";
};
uart4: serial@40010000 {
compatible = "st,stm32h7-uart";
reg = <0x40010000 0x400>;
- interrupts = <GIC_SPI 52 IRQ_TYPE_NONE>;
- clocks = <&clk_pclk1>;
+ interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc UART4_K>;
status = "disabled";
};
uart5: serial@40011000 {
compatible = "st,stm32h7-uart";
reg = <0x40011000 0x400>;
- interrupts = <GIC_SPI 53 IRQ_TYPE_NONE>;
- clocks = <&clk_pclk1>;
+ interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc UART5_K>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@40012000 {
+ compatible = "st,stm32f7-i2c";
+ reg = <0x40012000 0x400>;
+ interrupt-names = "event", "error";
+ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc I2C1_K>;
+ resets = <&rcc I2C1_R>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@40013000 {
+ compatible = "st,stm32f7-i2c";
+ reg = <0x40013000 0x400>;
+ interrupt-names = "event", "error";
+ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc I2C2_K>;
+ resets = <&rcc I2C2_R>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@40014000 {
+ compatible = "st,stm32f7-i2c";
+ reg = <0x40014000 0x400>;
+ interrupt-names = "event", "error";
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc I2C3_K>;
+ resets = <&rcc I2C3_R>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c5: i2c@40015000 {
+ compatible = "st,stm32f7-i2c";
+ reg = <0x40015000 0x400>;
+ interrupt-names = "event", "error";
+ interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc I2C5_K>;
+ resets = <&rcc I2C5_R>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
};
+ cec: cec@40016000 {
+ compatible = "st,stm32-cec";
+ reg = <0x40016000 0x400>;
+ interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc CEC_K>, <&clk_lse>;
+ clock-names = "cec", "hdmi-cec";
+ status = "disabled";
+ };
+
+ dac: dac@40017000 {
+ compatible = "st,stm32h7-dac-core";
+ reg = <0x40017000 0x400>;
+ clocks = <&rcc DAC12>;
+ clock-names = "pclk";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ dac1: dac@1 {
+ compatible = "st,stm32-dac";
+ #io-channels-cells = <1>;
+ reg = <1>;
+ status = "disabled";
+ };
+
+ dac2: dac@2 {
+ compatible = "st,stm32-dac";
+ #io-channels-cells = <1>;
+ reg = <2>;
+ status = "disabled";
+ };
+ };
+
uart7: serial@40018000 {
compatible = "st,stm32h7-uart";
reg = <0x40018000 0x400>;
- interrupts = <GIC_SPI 82 IRQ_TYPE_NONE>;
- clocks = <&clk_pclk1>;
+ interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc UART7_K>;
status = "disabled";
};
uart8: serial@40019000 {
compatible = "st,stm32h7-uart";
reg = <0x40019000 0x400>;
- interrupts = <GIC_SPI 83 IRQ_TYPE_NONE>;
- clocks = <&clk_pclk1>;
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc UART8_K>;
status = "disabled";
};
+ timers1: timer@44000000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x44000000 0x400>;
+ clocks = <&rcc TIM1_K>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+
+ timer@0 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <0>;
+ status = "disabled";
+ };
+ };
+
+ timers8: timer@44001000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x44001000 0x400>;
+ clocks = <&rcc TIM8_K>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+
+ timer@7 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <7>;
+ status = "disabled";
+ };
+ };
+
usart6: serial@44003000 {
compatible = "st,stm32h7-uart";
reg = <0x44003000 0x400>;
- interrupts = <GIC_SPI 71 IRQ_TYPE_NONE>;
- clocks = <&clk_pclk1>;
+ interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc USART6_K>;
+ status = "disabled";
+ };
+
+ timers15: timer@44006000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x44006000 0x400>;
+ clocks = <&rcc TIM15_K>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+
+ timer@14 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <14>;
+ status = "disabled";
+ };
+ };
+
+ timers16: timer@44007000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x44007000 0x400>;
+ clocks = <&rcc TIM16_K>;
+ clock-names = "int";
status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+ timer@15 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <15>;
+ status = "disabled";
+ };
+ };
+
+ timers17: timer@44008000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x44008000 0x400>;
+ clocks = <&rcc TIM17_K>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+
+ timer@16 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <16>;
+ status = "disabled";
+ };
+ };
+
+ dma1: dma@48000000 {
+ compatible = "st,stm32-dma";
+ reg = <0x48000000 0x400>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc DMA1>;
+ #dma-cells = <4>;
+ st,mem2mem;
+ dma-requests = <8>;
+ };
+
+ dma2: dma@48001000 {
+ compatible = "st,stm32-dma";
+ reg = <0x48001000 0x400>;
+ interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc DMA2>;
+ #dma-cells = <4>;
+ st,mem2mem;
+ dma-requests = <8>;
+ };
+
+ dmamux1: dma-router@48002000 {
+ compatible = "st,stm32h7-dmamux";
+ reg = <0x48002000 0x1c>;
+ #dma-cells = <3>;
+ dma-requests = <128>;
+ dma-masters = <&dma1 &dma2>;
+ dma-channels = <16>;
+ clocks = <&rcc DMAMUX>;
+ };
+
+ rcc: rcc@50000000 {
+ compatible = "st,stm32mp1-rcc", "syscon";
+ reg = <0x50000000 0x1000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
};
exti: interrupt-controller@5000d000 {
@@ -190,11 +614,227 @@
reg = <0x5000d000 0x400>;
};
+ lptimer2: timer@50021000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-lptimer";
+ reg = <0x50021000 0x400>;
+ clocks = <&rcc LPTIM2_K>;
+ clock-names = "mux";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm-lp";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ trigger@1 {
+ compatible = "st,stm32-lptimer-trigger";
+ reg = <1>;
+ status = "disabled";
+ };
+
+ counter {
+ compatible = "st,stm32-lptimer-counter";
+ status = "disabled";
+ };
+ };
+
+ lptimer3: timer@50022000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-lptimer";
+ reg = <0x50022000 0x400>;
+ clocks = <&rcc LPTIM3_K>;
+ clock-names = "mux";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm-lp";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ trigger@2 {
+ compatible = "st,stm32-lptimer-trigger";
+ reg = <2>;
+ status = "disabled";
+ };
+ };
+
+ lptimer4: timer@50023000 {
+ compatible = "st,stm32-lptimer";
+ reg = <0x50023000 0x400>;
+ clocks = <&rcc LPTIM4_K>;
+ clock-names = "mux";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm-lp";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+ };
+
+ lptimer5: timer@50024000 {
+ compatible = "st,stm32-lptimer";
+ reg = <0x50024000 0x400>;
+ clocks = <&rcc LPTIM5_K>;
+ clock-names = "mux";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm-lp";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+ };
+
+ vrefbuf: vrefbuf@50025000 {
+ compatible = "st,stm32-vrefbuf";
+ reg = <0x50025000 0x8>;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <2500000>;
+ clocks = <&rcc VREF>;
+ status = "disabled";
+ };
+
+ cryp1: cryp@54001000 {
+ compatible = "st,stm32mp1-cryp";
+ reg = <0x54001000 0x400>;
+ interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc CRYP1>;
+ resets = <&rcc CRYP1_R>;
+ status = "disabled";
+ };
+
+ rng1: rng@54003000 {
+ compatible = "st,stm32-rng";
+ reg = <0x54003000 0x400>;
+ clocks = <&rcc RNG1_K>;
+ resets = <&rcc RNG1_R>;
+ status = "disabled";
+ };
+
+ mdma1: dma@58000000 {
+ compatible = "st,stm32h7-mdma";
+ reg = <0x58000000 0x1000>;
+ interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc MDMA>;
+ #dma-cells = <5>;
+ dma-channels = <32>;
+ dma-requests = <48>;
+ };
+
+ qspi: qspi@58003000 {
+ compatible = "st,stm32f469-qspi";
+ reg = <0x58003000 0x1000>, <0x70000000 0x10000000>;
+ reg-names = "qspi", "qspi_mm";
+ interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc QSPI_K>;
+ resets = <&rcc QSPI_R>;
+ status = "disabled";
+ };
+
+ crc1: crc@58009000 {
+ compatible = "st,stm32f7-crc";
+ reg = <0x58009000 0x400>;
+ clocks = <&rcc CRC1>;
+ status = "disabled";
+ };
+
+ usbh_ohci: usbh-ohci@5800c000 {
+ compatible = "generic-ohci";
+ reg = <0x5800c000 0x1000>;
+ clocks = <&rcc USBH>;
+ resets = <&rcc USBH_R>;
+ interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ usbh_ehci: usbh-ehci@5800d000 {
+ compatible = "generic-ehci";
+ reg = <0x5800d000 0x1000>;
+ clocks = <&rcc USBH>;
+ resets = <&rcc USBH_R>;
+ interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+ companion = <&usbh_ohci>;
+ status = "disabled";
+ };
+
+ dsi: dsi@5a000000 {
+ compatible = "st,stm32-dsi";
+ reg = <0x5a000000 0x800>;
+ clocks = <&rcc DSI_K>, <&clk_hse>, <&rcc DSI_PX>;
+ clock-names = "pclk", "ref", "px_clk";
+ resets = <&rcc DSI_R>;
+ reset-names = "apb";
+ status = "disabled";
+ };
+
+ ltdc: display-controller@5a001000 {
+ compatible = "st,stm32-ltdc";
+ reg = <0x5a001000 0x400>;
+ interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc LTDC_PX>;
+ clock-names = "lcd";
+ resets = <&rcc LTDC_R>;
+ status = "disabled";
+ };
+
+ usbphyc: usbphyc@5a006000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32mp1-usbphyc";
+ reg = <0x5a006000 0x1000>;
+ clocks = <&rcc USBPHY_K>;
+ resets = <&rcc USBPHY_R>;
+ status = "disabled";
+
+ usbphyc_port0: usb-phy@0 {
+ #phy-cells = <0>;
+ reg = <0>;
+ };
+
+ usbphyc_port1: usb-phy@1 {
+ #phy-cells = <1>;
+ reg = <1>;
+ };
+ };
+
usart1: serial@5c000000 {
compatible = "st,stm32h7-uart";
reg = <0x5c000000 0x400>;
- interrupts = <GIC_SPI 37 IRQ_TYPE_NONE>;
- clocks = <&clk_pclk1>;
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc USART1_K>;
+ status = "disabled";
+ };
+
+ i2c4: i2c@5c002000 {
+ compatible = "st,stm32f7-i2c";
+ reg = <0x5c002000 0x400>;
+ interrupt-names = "event", "error";
+ interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc I2C4_K>;
+ resets = <&rcc I2C4_R>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c6: i2c@5c009000 {
+ compatible = "st,stm32f7-i2c";
+ reg = <0x5c009000 0x400>;
+ interrupt-names = "event", "error";
+ interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc I2C6_K>;
+ resets = <&rcc I2C6_R>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
};
};
diff --git a/arch/arm/boot/dts/sun7i-a20-olimex-som-evb-emmc.dts b/arch/arm/boot/dts/sun7i-a20-olimex-som-evb-emmc.dts
new file mode 100644
index 000000000000..81ebc97b76ee
--- /dev/null
+++ b/arch/arm/boot/dts/sun7i-a20-olimex-som-evb-emmc.dts
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Source for A20-Olimex-SOM-EVB-eMMC Board
+ *
+ * Copyright (C) 2018 Olimex Ltd.
+ * Author: Stefan Mavrodiev <stefan@olimex.com>
+ */
+
+/dts-v1/;
+#include "sun7i-a20-olimex-som-evb.dts"
+
+/ {
+
+ model = "Olimex A20-Olimex-SOM-EVB-eMMC";
+ compatible = "olimex,a20-olimex-som-evb-emmc", "allwinner,sun7i-a20";
+
+ mmc2_pwrseq: mmc2_pwrseq {
+ compatible = "mmc-pwrseq-emmc";
+ reset-gpios = <&pio 2 18 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_pins_a>;
+ vmmc-supply = <&reg_vcc3v3>;
+ mmc-pwrseq = <&mmc2_pwrseq>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+
+ emmc: emmc@0 {
+ reg = <0>;
+ compatible = "mmc-card";
+ broken-hpi;
+ };
+};
diff --git a/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts b/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts
index eae8e267b9ef..3d7b5c848fef 100644
--- a/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts
@@ -172,8 +172,7 @@
pinctrl-0 = <&mmc0_pins_a>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
- cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>;
- cd-inverted;
+ cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/sun8i-a23-a33.dtsi
index 971f9be699a7..44f3cad3de75 100644
--- a/arch/arm/boot/dts/sun8i-a23-a33.dtsi
+++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi
@@ -198,6 +198,8 @@
clock-names = "ahb", "mod";
resets = <&ccu RST_BUS_NAND>;
reset-names = "ahb";
+ pinctrl-names = "default";
+ pinctrl-0 = <&nand_pins &nand_pins_cs0 &nand_pins_rb0>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -315,6 +317,37 @@
bias-pull-up;
};
+ nand_pins: nand-pins {
+ pins = "PC0", "PC1", "PC2", "PC5",
+ "PC8", "PC9", "PC10", "PC11",
+ "PC12", "PC13", "PC14", "PC15";
+ function = "nand0";
+ };
+
+ nand_pins_cs0: nand-pins-cs0 {
+ pins = "PC4";
+ function = "nand0";
+ bias-pull-up;
+ };
+
+ nand_pins_cs1: nand-pins-cs1 {
+ pins = "PC3";
+ function = "nand0";
+ bias-pull-up;
+ };
+
+ nand_pins_rb0: nand-pins-rb0 {
+ pins = "PC6";
+ function = "nand0";
+ bias-pull-up;
+ };
+
+ nand_pins_rb1: nand-pins-rb1 {
+ pins = "PC7";
+ function = "nand0";
+ bias-pull-up;
+ };
+
pwm0_pins: pwm0 {
pins = "PH0";
function = "pwm0";
diff --git a/arch/arm/boot/dts/sun8i-a33.dtsi b/arch/arm/boot/dts/sun8i-a33.dtsi
index a21f2ed07a52..8d278ee001e9 100644
--- a/arch/arm/boot/dts/sun8i-a33.dtsi
+++ b/arch/arm/boot/dts/sun8i-a33.dtsi
@@ -236,6 +236,11 @@
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
+
+ tcon0_out_dsi: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&dsi_in_tcon0>;
+ };
};
};
};
@@ -280,6 +285,45 @@
#io-channel-cells = <0>;
};
+ dsi: dsi@1ca0000 {
+ compatible = "allwinner,sun6i-a31-mipi-dsi";
+ reg = <0x01ca0000 0x1000>;
+ interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_MIPI_DSI>,
+ <&ccu CLK_DSI_SCLK>;
+ clock-names = "bus", "mod";
+ resets = <&ccu RST_BUS_MIPI_DSI>;
+ phys = <&dphy>;
+ phy-names = "dphy";
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ dsi_in_tcon0: endpoint {
+ remote-endpoint = <&tcon0_out_dsi>;
+ };
+ };
+ };
+ };
+
+ dphy: d-phy@1ca1000 {
+ compatible = "allwinner,sun6i-a31-mipi-dphy";
+ reg = <0x01ca1000 0x1000>;
+ clocks = <&ccu CLK_BUS_MIPI_DSI>,
+ <&ccu CLK_DSI_DPHY>;
+ clock-names = "bus", "mod";
+ resets = <&ccu RST_BUS_MIPI_DSI>;
+ status = "disabled";
+ #phy-cells = <0>;
+ };
+
fe0: display-frontend@1e00000 {
compatible = "allwinner,sun8i-a33-display-frontend";
reg = <0x01e00000 0x20000>;
diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi
index 568307639be8..2be23d600957 100644
--- a/arch/arm/boot/dts/sun8i-a83t.dtsi
+++ b/arch/arm/boot/dts/sun8i-a83t.dtsi
@@ -66,6 +66,8 @@
compatible = "arm,cortex-a7";
device_type = "cpu";
operating-points-v2 = <&cpu0_opp_table>;
+ cci-control-port = <&cci_control0>;
+ enable-method = "allwinner,sun8i-a83t-smp";
reg = <0>;
};
@@ -73,6 +75,8 @@
compatible = "arm,cortex-a7";
device_type = "cpu";
operating-points-v2 = <&cpu0_opp_table>;
+ cci-control-port = <&cci_control0>;
+ enable-method = "allwinner,sun8i-a83t-smp";
reg = <1>;
};
@@ -80,6 +84,8 @@
compatible = "arm,cortex-a7";
device_type = "cpu";
operating-points-v2 = <&cpu0_opp_table>;
+ cci-control-port = <&cci_control0>;
+ enable-method = "allwinner,sun8i-a83t-smp";
reg = <2>;
};
@@ -87,6 +93,8 @@
compatible = "arm,cortex-a7";
device_type = "cpu";
operating-points-v2 = <&cpu0_opp_table>;
+ cci-control-port = <&cci_control0>;
+ enable-method = "allwinner,sun8i-a83t-smp";
reg = <3>;
};
@@ -96,6 +104,8 @@
compatible = "arm,cortex-a7";
device_type = "cpu";
operating-points-v2 = <&cpu1_opp_table>;
+ cci-control-port = <&cci_control1>;
+ enable-method = "allwinner,sun8i-a83t-smp";
reg = <0x100>;
};
@@ -103,6 +113,8 @@
compatible = "arm,cortex-a7";
device_type = "cpu";
operating-points-v2 = <&cpu1_opp_table>;
+ cci-control-port = <&cci_control1>;
+ enable-method = "allwinner,sun8i-a83t-smp";
reg = <0x101>;
};
@@ -110,6 +122,8 @@
compatible = "arm,cortex-a7";
device_type = "cpu";
operating-points-v2 = <&cpu1_opp_table>;
+ cci-control-port = <&cci_control1>;
+ enable-method = "allwinner,sun8i-a83t-smp";
reg = <0x102>;
};
@@ -117,6 +131,8 @@
compatible = "arm,cortex-a7";
device_type = "cpu";
operating-points-v2 = <&cpu1_opp_table>;
+ cci-control-port = <&cci_control1>;
+ enable-method = "allwinner,sun8i-a83t-smp";
reg = <0x103>;
};
};
@@ -349,6 +365,44 @@
};
};
+ cpucfg@1700000 {
+ compatible = "allwinner,sun8i-a83t-cpucfg";
+ reg = <0x01700000 0x400>;
+ };
+
+ cci@1790000 {
+ compatible = "arm,cci-400";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x01790000 0x10000>;
+ ranges = <0x0 0x01790000 0x10000>;
+
+ cci_control0: slave-if@4000 {
+ compatible = "arm,cci-400-ctrl-if";
+ interface-type = "ace";
+ reg = <0x4000 0x1000>;
+ };
+
+ cci_control1: slave-if@5000 {
+ compatible = "arm,cci-400-ctrl-if";
+ interface-type = "ace";
+ reg = <0x5000 0x1000>;
+ };
+
+ pmu@9000 {
+ compatible = "arm,cci-400-pmu,r1";
+ reg = <0x9000 0x5000>;
+ interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
syscon: syscon@1c00000 {
compatible = "allwinner,sun8i-a83t-system-controller",
"syscon";
@@ -492,6 +546,11 @@
#size-cells = <0>;
};
+ sid: eeprom@1c14000 {
+ compatible = "allwinner,sun8i-a83t-sid";
+ reg = <0x1c14000 0x400>;
+ };
+
usb_otg: usb@1c19000 {
compatible = "allwinner,sun8i-a83t-musb",
"allwinner,sun8i-a33-musb";
@@ -928,6 +987,11 @@
#reset-cells = <1>;
};
+ r_cpucfg@1f01c00 {
+ compatible = "allwinner,sun8i-a83t-r-cpucfg";
+ reg = <0x1f01c00 0x400>;
+ };
+
r_pio: pinctrl@1f02c00 {
compatible = "allwinner,sun8i-a83t-r-pinctrl";
reg = <0x01f02c00 0x400>;
diff --git a/arch/arm/boot/dts/sun8i-h2-plus-libretech-all-h3-cc.dts b/arch/arm/boot/dts/sun8i-h2-plus-libretech-all-h3-cc.dts
new file mode 100644
index 000000000000..4db0d4bb65eb
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-h2-plus-libretech-all-h3-cc.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2018 Chen-Yu Tsai <wens@csie.org>
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-libretech-all-h3-cc.dtsi"
+
+/ {
+ model = "Libre Computer Board ALL-H3-CC H2+";
+ compatible = "libretech,all-h3-cc-h2-plus", "allwinner,sun8i-h2-plus";
+};
diff --git a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
index 0bc031fe4c56..84cd9c061227 100644
--- a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
+++ b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
@@ -89,6 +89,23 @@
gpio = <&pio 0 20 GPIO_ACTIVE_HIGH>;
};
+ reg_vdd_cpux: vdd-cpux-regulator {
+ compatible = "regulator-gpio";
+ regulator-name = "vdd-cpux";
+ regulator-type = "voltage";
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-ramp-delay = <50>; /* 4ms */
+
+ gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
+ enable-active-high;
+ gpios-states = <1>;
+ states = <1100000 0
+ 1300000 1>;
+ };
+
wifi_pwrseq: wifi_pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>;
@@ -96,6 +113,10 @@
};
};
+&cpu0 {
+ cpu-supply = <&reg_vdd_cpux>;
+};
+
&ehci0 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun8i-h3-libretech-all-h3-cc.dts b/arch/arm/boot/dts/sun8i-h3-libretech-all-h3-cc.dts
index b20a710da7bc..a8b2f0f1c11d 100644
--- a/arch/arm/boot/dts/sun8i-h3-libretech-all-h3-cc.dts
+++ b/arch/arm/boot/dts/sun8i-h3-libretech-all-h3-cc.dts
@@ -6,213 +6,9 @@
/dts-v1/;
#include "sun8i-h3.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
+#include "sunxi-libretech-all-h3-cc.dtsi"
/ {
model = "Libre Computer Board ALL-H3-CC H3";
compatible = "libretech,all-h3-cc-h3", "allwinner,sun8i-h3";
-
- aliases {
- ethernet0 = &emac;
- serial0 = &uart0;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- connector {
- compatible = "hdmi-connector";
- type = "a";
-
- port {
- hdmi_con_in: endpoint {
- remote-endpoint = <&hdmi_out_con>;
- };
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- pwr_led {
- label = "librecomputer:green:pwr";
- gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
- default-state = "on";
- };
-
- status_led {
- label = "librecomputer:blue:status";
- gpios = <&pio 0 7 GPIO_ACTIVE_HIGH>; /* PA7 */
- };
- };
-
- gpio_keys {
- compatible = "gpio-keys";
-
- power {
- label = "power";
- linux,code = <KEY_POWER>;
- gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
- };
- };
-
- reg_vcc1v2: vcc1v2 {
- compatible = "regulator-fixed";
- regulator-name = "vcc1v2";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&reg_vcc5v0>;
- gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
- enable-active-high;
- };
-
- reg_vcc3v3: vcc3v3 {
- compatible = "regulator-fixed";
- regulator-name = "vcc3v3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&reg_vcc5v0>;
- };
-
- /* This represents the board's 5V input */
- reg_vcc5v0: vcc5v0 {
- compatible = "regulator-fixed";
- regulator-name = "vcc5v0";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- };
-
- reg_vcc_dram: vcc-dram {
- compatible = "regulator-fixed";
- regulator-name = "vcc-dram";
- regulator-min-microvolt = <1500000>;
- regulator-max-microvolt = <1500000>;
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&reg_vcc5v0>;
- gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */
- enable-active-high;
- };
-
- reg_vcc_io: vcc-io {
- compatible = "regulator-fixed";
- regulator-name = "vcc-io";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&reg_vcc3v3>;
- gpio = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL5 */
- };
-
- reg_vdd_cpux: vdd-cpux {
- compatible = "regulator-fixed";
- regulator-name = "vdd-cpux";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&reg_vcc5v0>;
- gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
- enable-active-high;
- };
-};
-
-&codec {
- allwinner,audio-routing =
- "Line Out", "LINEOUT",
- "MIC1", "Mic",
- "Mic", "MBIAS";
- status = "okay";
-};
-
-&de {
- status = "okay";
-};
-
-&ehci0 {
- status = "okay";
-};
-
-&ehci1 {
- status = "okay";
-};
-
-&ehci2 {
- status = "okay";
-};
-
-&ehci3 {
- status = "okay";
-};
-
-&emac {
- phy-handle = <&int_mii_phy>;
- phy-mode = "mii";
- allwinner,leds-active-low;
- status = "okay";
-};
-
-&hdmi {
- status = "okay";
-};
-
-&hdmi_out {
- hdmi_out_con: endpoint {
- remote-endpoint = <&hdmi_con_in>;
- };
-};
-
-&ir {
- pinctrl-names = "default";
- pinctrl-0 = <&ir_pins_a>;
- status = "okay";
-};
-
-&mmc0 {
- vmmc-supply = <&reg_vcc_io>;
- bus-width = <4>;
- cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
- status = "okay";
-};
-
-&ohci0 {
- status = "okay";
-};
-
-&ohci1 {
- status = "okay";
-};
-
-&ohci2 {
- status = "okay";
-};
-
-&ohci3 {
- status = "okay";
-};
-
-&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
- status = "okay";
-};
-
-&usb_otg {
- dr_mode = "host";
- status = "okay";
-};
-
-&usbphy {
- /* VBUS on USB ports are always on */
- usb0_vbus-supply = <&reg_vcc5v0>;
- usb1_vbus-supply = <&reg_vcc5v0>;
- usb2_vbus-supply = <&reg_vcc5v0>;
- usb3_vbus-supply = <&reg_vcc5v0>;
- status = "okay";
};
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts
index 232f124ce62c..245fd658defb 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts
@@ -99,6 +99,27 @@
gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
};
};
+
+ reg_vdd_cpux: vdd-cpux-regulator {
+ compatible = "regulator-gpio";
+ regulator-name = "vdd-cpux";
+ regulator-type = "voltage";
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-ramp-delay = <50>; /* 4ms */
+
+ gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
+ enable-active-high;
+ gpios-states = <0x1>;
+ states = <1100000 0x0
+ 1300000 0x1>;
+ };
+};
+
+&cpu0 {
+ cpu-supply = <&reg_vdd_cpux>;
};
&de {
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts
index cea4d647ecbf..46240334128f 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts
@@ -113,6 +113,10 @@
status = "okay";
};
+&cpu0 {
+ cpu-supply = <&reg_vdd_cpux>;
+};
+
&ehci0 {
status = "okay";
};
@@ -182,6 +186,30 @@
};
};
+&r_i2c {
+ status = "okay";
+
+ reg_vdd_cpux: regulator@65 {
+ compatible = "silergy,sy8106a";
+ reg = <0x65>;
+ regulator-name = "vdd-cpux";
+ silergy,fixed-microvolt = <1200000>;
+ /*
+ * The datasheet uses 1.1V as the minimum value of VDD-CPUX,
+ * however both the Armbian DVFS table and the official one
+ * have operating points with voltage under 1.1V, and both
+ * DVFS table are known to work properly at the lowest
+ * operating point.
+ *
+ * Use 1.0V as the minimum voltage instead.
+ */
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+};
+
&r_pio {
leds_r_opc: led_pins {
pins = "PL10";
diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi
index 10da8ed7db81..41d57c76f290 100644
--- a/arch/arm/boot/dts/sun8i-h3.dtsi
+++ b/arch/arm/boot/dts/sun8i-h3.dtsi
@@ -43,32 +43,62 @@
#include "sunxi-h3-h5.dtsi"
/ {
+ cpu0_opp_table: opp_table0 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp@648000000 {
+ opp-hz = /bits/ 64 <648000000>;
+ opp-microvolt = <1040000 1040000 1300000>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ };
+
+ opp@816000000 {
+ opp-hz = /bits/ 64 <816000000>;
+ opp-microvolt = <1100000 1100000 1300000>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ };
+
+ opp@1008000000 {
+ opp-hz = /bits/ 64 <1008000000>;
+ opp-microvolt = <1200000 1200000 1300000>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ };
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
- cpu@0 {
+ cpu0: cpu@0 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <0>;
+ clocks = <&ccu CLK_CPUX>;
+ clock-names = "cpu";
+ operating-points-v2 = <&cpu0_opp_table>;
+ #cooling-cells = <2>;
};
cpu@1 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <1>;
+ operating-points-v2 = <&cpu0_opp_table>;
};
cpu@2 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <2>;
+ operating-points-v2 = <&cpu0_opp_table>;
};
cpu@3 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <3>;
+ operating-points-v2 = <&cpu0_opp_table>;
};
};
diff --git a/arch/arm/boot/dts/sun8i-r16-nintendo-nes-classic.dts b/arch/arm/boot/dts/sun8i-r16-nintendo-nes-classic.dts
new file mode 100644
index 000000000000..fc0658cfa319
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-r16-nintendo-nes-classic.dts
@@ -0,0 +1,56 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/* Copyright (c) 2016 FUKAUMI Naoki <naobsd@gmail.com> */
+
+/dts-v1/;
+#include "sun8i-a33.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+/ {
+ model = "Nintendo NES Classic Edition";
+ compatible = "nintendo,nes-classic", "allwinner,sun8i-r16",
+ "allwinner,sun8i-a33";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&uart0 {
+ /*
+ * UART0 is available on two ports: PB and PF, both are accessible.
+ * PF can also be used for the SD card so PB is preferred.
+ */
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&nfc {
+ status = "okay";
+
+ /* 2Gb Macronix MX30LF2G18AC (3V) */
+ nand@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0>;
+ allwinner,rb = <0>;
+ nand-ecc-mode = "hw";
+ nand-ecc-strength = <16>;
+ nand-ecc-step-size = <1024>;
+ };
+};
+
+&usb_otg {
+ status = "okay";
+ dr_mode = "otg";
+};
+
+&usbphy {
+ /* VBUS is always on because it is wired to the power supply */
+ usb1_vbus-supply = <&reg_vcc5v0>;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-r16-nintendo-super-nes-classic.dts b/arch/arm/boot/dts/sun8i-r16-nintendo-super-nes-classic.dts
new file mode 100644
index 000000000000..80761d7904ec
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-r16-nintendo-super-nes-classic.dts
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/* Copyright (c) 2018 Miquèl RAYNAL <miquel.raynal@bootlin.com> */
+
+/dts-v1/;
+#include "sun8i-r16-nintendo-nes-classic.dts"
+
+/ {
+ model = "Nintendo SuperNES Classic Edition";
+ compatible = "nintendo,super-nes-classic", "nintendo,nes-classic",
+ "allwinner,sun8i-r16", "allwinner,sun8i-a33";
+};
diff --git a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
index 27d9ccd0ef2f..25fb048c7df2 100644
--- a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
+++ b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
@@ -51,6 +51,7 @@
compatible = "sinovoip,bpi-m2-ultra", "allwinner,sun8i-r40";
aliases {
+ ethernet0 = &gmac;
serial0 = &uart0;
};
@@ -101,6 +102,22 @@
status = "okay";
};
+&gmac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac_rgmii_pins>;
+ phy-handle = <&phy1>;
+ phy-mode = "rgmii";
+ phy-supply = <&reg_dc1sw>;
+ status = "okay";
+};
+
+&gmac_mdio {
+ phy1: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ };
+};
+
&i2c0 {
status = "okay";
@@ -114,6 +131,48 @@
#include "axp22x.dtsi"
+&mmc0 {
+ vmmc-supply = <&reg_dcdc1>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>; /* PH13 */
+ cd-inverted;
+ status = "okay";
+};
+
+&mmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pg_pins>;
+ vmmc-supply = <&reg_dldo2>;
+ vqmmc-supply = <&reg_dldo1>;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+};
+
+&mmc2 {
+ vmmc-supply = <&reg_dcdc1>;
+ vqmmc-supply = <&reg_dcdc1>;
+ bus-width = <8>;
+ non-removable;
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&ohci2 {
+ status = "okay";
+};
+
+&reg_aldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-name = "vcc-pa";
+};
+
&reg_aldo3 {
regulator-always-on;
regulator-min-microvolt = <2700000>;
@@ -121,6 +180,12 @@
regulator-name = "avcc";
};
+&reg_dc1sw {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "vcc-gmac-phy";
+};
+
&reg_dcdc1 {
regulator-always-on;
regulator-min-microvolt = <3000000>;
@@ -161,40 +226,6 @@
regulator-name = "vcc-wifi";
};
-&mmc0 {
- vmmc-supply = <&reg_dcdc1>;
- bus-width = <4>;
- cd-gpios = <&pio 7 13 GPIO_ACTIVE_LOW>; /* PH13 */
- status = "okay";
-};
-
-&mmc1 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc1_pg_pins>;
- vmmc-supply = <&reg_dldo2>;
- vqmmc-supply = <&reg_dldo1>;
- mmc-pwrseq = <&wifi_pwrseq>;
- bus-width = <4>;
- non-removable;
- status = "okay";
-};
-
-&mmc2 {
- vmmc-supply = <&reg_dcdc1>;
- vqmmc-supply = <&reg_dcdc1>;
- bus-width = <8>;
- non-removable;
- status = "okay";
-};
-
-&ohci1 {
- status = "okay";
-};
-
-&ohci2 {
- status = "okay";
-};
-
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pb_pins>;
diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-r40.dtsi
index 173dcc1652d2..bd97ca3dc2fa 100644
--- a/arch/arm/boot/dts/sun8i-r40.dtsi
+++ b/arch/arm/boot/dts/sun8i-r40.dtsi
@@ -265,6 +265,19 @@
#interrupt-cells = <3>;
#gpio-cells = <3>;
+ gmac_rgmii_pins: gmac-rgmii-pins {
+ pins = "PA0", "PA1", "PA2", "PA3",
+ "PA4", "PA5", "PA6", "PA7",
+ "PA8", "PA10", "PA11", "PA12",
+ "PA13", "PA15", "PA16";
+ function = "gmac";
+ /*
+ * data lines in RGMII mode use DDR mode
+ * and need a higher signal drive strength
+ */
+ drive-strength = <40>;
+ };
+
i2c0_pins: i2c0-pins {
pins = "PB0", "PB1";
function = "i2c0";
@@ -451,6 +464,27 @@
#size-cells = <0>;
};
+ gmac: ethernet@1c50000 {
+ compatible = "allwinner,sun8i-r40-gmac";
+ syscon = <&ccu>;
+ reg = <0x01c50000 0x10000>;
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+ resets = <&ccu RST_BUS_GMAC>;
+ reset-names = "stmmaceth";
+ clocks = <&ccu CLK_BUS_GMAC>;
+ clock-names = "stmmaceth";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ gmac_mdio: mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
gic: interrupt-controller@1c81000 {
compatible = "arm,gic-400";
reg = <0x01c81000 0x1000>,
diff --git a/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts b/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts
index a26d72c3f9b5..35859d8f3267 100644
--- a/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts
+++ b/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts
@@ -87,6 +87,11 @@
};
};
+&ehci1 {
+ /* Terminus Tech FE 1.1s 4-port USB 2.0 hub here */
+ status = "okay";
+};
+
&i2c0 {
status = "okay";
@@ -170,3 +175,8 @@
pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
+
+&usbphy {
+ usb1_vbus-supply = <&reg_vcc5v0>;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
index 1be1a02d6df2..c3bff1105e5d 100644
--- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi
+++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
@@ -822,6 +822,19 @@
status = "disabled";
};
+ r_i2c: i2c@1f02400 {
+ compatible = "allwinner,sun6i-a31-i2c";
+ reg = <0x01f02400 0x400>;
+ interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&r_i2c_pins>;
+ clocks = <&r_ccu CLK_APB0_I2C>;
+ resets = <&r_ccu RST_APB0_I2C>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
r_pio: pinctrl@1f02c00 {
compatible = "allwinner,sun8i-h3-r-pinctrl";
reg = <0x01f02c00 0x400>;
@@ -837,6 +850,11 @@
pins = "PL11";
function = "s_cir_rx";
};
+
+ r_i2c_pins: r-i2c {
+ pins = "PL0", "PL1";
+ function = "s_i2c";
+ };
};
};
};
diff --git a/arch/arm/boot/dts/sunxi-libretech-all-h3-cc.dtsi b/arch/arm/boot/dts/sunxi-libretech-all-h3-cc.dtsi
new file mode 100644
index 000000000000..f7ffdd6658a2
--- /dev/null
+++ b/arch/arm/boot/dts/sunxi-libretech-all-h3-cc.dtsi
@@ -0,0 +1,215 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2017 Chen-Yu Tsai <wens@csie.org>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ aliases {
+ ethernet0 = &emac;
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ pwr_led {
+ label = "librecomputer:green:pwr";
+ gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
+ default-state = "on";
+ };
+
+ status_led {
+ label = "librecomputer:blue:status";
+ gpios = <&pio 0 7 GPIO_ACTIVE_HIGH>; /* PA7 */
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+
+ power {
+ label = "power";
+ linux,code = <KEY_POWER>;
+ gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
+ };
+ };
+
+ reg_vcc1v2: vcc1v2 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc1v2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&reg_vcc5v0>;
+ gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
+ enable-active-high;
+ };
+
+ reg_vcc3v3: vcc3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&reg_vcc5v0>;
+ };
+
+ /* This represents the board's 5V input */
+ reg_vcc5v0: vcc5v0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ reg_vcc_dram: vcc-dram {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc-dram";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&reg_vcc5v0>;
+ gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */
+ enable-active-high;
+ };
+
+ reg_vcc_io: vcc-io {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc-io";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&reg_vcc3v3>;
+ gpio = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL5 */
+ };
+
+ reg_vdd_cpux: vdd-cpux {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd-cpux";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&reg_vcc5v0>;
+ gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
+ enable-active-high;
+ };
+};
+
+&codec {
+ allwinner,audio-routing =
+ "Line Out", "LINEOUT",
+ "MIC1", "Mic",
+ "Mic", "MBIAS";
+ status = "okay";
+};
+
+&cpu0 {
+ cpu-supply = <&reg_vdd_cpux>;
+};
+
+&de {
+ status = "okay";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&ehci2 {
+ status = "okay";
+};
+
+&ehci3 {
+ status = "okay";
+};
+
+&emac {
+ phy-handle = <&int_mii_phy>;
+ phy-mode = "mii";
+ allwinner,leds-active-low;
+ status = "okay";
+};
+
+&hdmi {
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
+&ir {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ir_pins_a>;
+ status = "okay";
+};
+
+&mmc0 {
+ vmmc-supply = <&reg_vcc_io>;
+ bus-width = <4>;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&ohci2 {
+ status = "okay";
+};
+
+&ohci3 {
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&usb_otg {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usbphy {
+ /* VBUS on USB ports are always on */
+ usb0_vbus-supply = <&reg_vcc5v0>;
+ usb1_vbus-supply = <&reg_vcc5v0>;
+ usb2_vbus-supply = <&reg_vcc5v0>;
+ usb3_vbus-supply = <&reg_vcc5v0>;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/tegra114.dtsi b/arch/arm/boot/dts/tegra114.dtsi
index 0e4a13295d8a..84c4358dacac 100644
--- a/arch/arm/boot/dts/tegra114.dtsi
+++ b/arch/arm/boot/dts/tegra114.dtsi
@@ -19,6 +19,7 @@
clocks = <&tegra_car TEGRA114_CLK_HOST1X>;
resets = <&tegra_car 28>;
reset-names = "host1x";
+ iommus = <&mc TEGRA_SWGROUP_HC>;
#address-cells = <1>;
#size-cells = <1>;
@@ -32,6 +33,8 @@
clocks = <&tegra_car TEGRA114_CLK_GR2D>;
resets = <&tegra_car 21>;
reset-names = "2d";
+
+ iommus = <&mc TEGRA_SWGROUP_G2>;
};
gr3d@54180000 {
@@ -40,6 +43,8 @@
clocks = <&tegra_car TEGRA114_CLK_GR3D>;
resets = <&tegra_car 24>;
reset-names = "3d";
+
+ iommus = <&mc TEGRA_SWGROUP_NV>;
};
dc@54200000 {
diff --git a/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi b/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi
index bb67edb016c5..3455822350c5 100644
--- a/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi
+++ b/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi
@@ -1536,15 +1536,15 @@
};
serial@70006040 {
- compatible = "nvidia,tegra124-hsuart";
+ compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart";
};
serial@70006200 {
- compatible = "nvidia,tegra124-hsuart";
+ compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart";
};
serial@70006300 {
- compatible = "nvidia,tegra124-hsuart";
+ compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart";
};
hdmi_ddc: i2c@7000c700 {
diff --git a/arch/arm/boot/dts/tegra124-apalis.dtsi b/arch/arm/boot/dts/tegra124-apalis.dtsi
index 65a2161b9b8e..9f960c84ba10 100644
--- a/arch/arm/boot/dts/tegra124-apalis.dtsi
+++ b/arch/arm/boot/dts/tegra124-apalis.dtsi
@@ -1565,15 +1565,15 @@
};
serial@70006040 {
- compatible = "nvidia,tegra124-hsuart";
+ compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart";
};
serial@70006200 {
- compatible = "nvidia,tegra124-hsuart";
+ compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart";
};
serial@70006300 {
- compatible = "nvidia,tegra124-hsuart";
+ compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart";
};
hdmi_ddc: i2c@7000c400 {
diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi
index a110cf84d85f..09087b9c5e26 100644
--- a/arch/arm/boot/dts/tegra30.dtsi
+++ b/arch/arm/boot/dts/tegra30.dtsi
@@ -112,6 +112,7 @@
clocks = <&tegra_car TEGRA30_CLK_HOST1X>;
resets = <&tegra_car 28>;
reset-names = "host1x";
+ iommus = <&mc TEGRA_SWGROUP_HC>;
#address-cells = <1>;
#size-cells = <1>;
@@ -125,6 +126,8 @@
clocks = <&tegra_car TEGRA30_CLK_MPE>;
resets = <&tegra_car 60>;
reset-names = "mpe";
+
+ iommus = <&mc TEGRA_SWGROUP_MPE>;
};
vi@54080000 {
@@ -134,6 +137,8 @@
clocks = <&tegra_car TEGRA30_CLK_VI>;
resets = <&tegra_car 20>;
reset-names = "vi";
+
+ iommus = <&mc TEGRA_SWGROUP_VI>;
};
epp@540c0000 {
@@ -143,6 +148,8 @@
clocks = <&tegra_car TEGRA30_CLK_EPP>;
resets = <&tegra_car 19>;
reset-names = "epp";
+
+ iommus = <&mc TEGRA_SWGROUP_EPP>;
};
isp@54100000 {
@@ -152,6 +159,8 @@
clocks = <&tegra_car TEGRA30_CLK_ISP>;
resets = <&tegra_car 23>;
reset-names = "isp";
+
+ iommus = <&mc TEGRA_SWGROUP_ISP>;
};
gr2d@54140000 {
@@ -161,6 +170,8 @@
clocks = <&tegra_car TEGRA30_CLK_GR2D>;
resets = <&tegra_car 21>;
reset-names = "2d";
+
+ iommus = <&mc TEGRA_SWGROUP_G2>;
};
gr3d@54180000 {
@@ -172,6 +183,9 @@
resets = <&tegra_car 24>,
<&tegra_car 98>;
reset-names = "3d", "3d2";
+
+ iommus = <&mc TEGRA_SWGROUP_NV>,
+ <&mc TEGRA_SWGROUP_NV2>;
};
dc@54200000 {
diff --git a/arch/arm/boot/dts/uniphier-pro4.dtsi b/arch/arm/boot/dts/uniphier-pro4.dtsi
index 844124bc9c9c..49539f035219 100644
--- a/arch/arm/boot/dts/uniphier-pro4.dtsi
+++ b/arch/arm/boot/dts/uniphier-pro4.dtsi
@@ -286,7 +286,7 @@
has-transaction-translator;
};
- soc-glue@5f800000 {
+ soc_glue: soc-glue@5f800000 {
compatible = "socionext,uniphier-pro4-soc-glue",
"simple-mfd", "syscon";
reg = <0x5f800000 0x2000>;
@@ -371,10 +371,14 @@
interrupts = <0 66 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ether_rgmii>;
- clocks = <&sys_clk 6>;
- resets = <&sys_rst 6>;
+ clock-names = "gio", "ether", "ether-gb", "ether-phy";
+ clocks = <&sys_clk 12>, <&sys_clk 6>, <&sys_clk 7>,
+ <&sys_clk 10>;
+ reset-names = "gio", "ether";
+ resets = <&sys_rst 12>, <&sys_rst 6>;
phy-mode = "rgmii";
local-mac-address = [00 00 00 00 00 00];
+ socionext,syscon-phy-mode = <&soc_glue 0>;
mdio: mdio {
#address-cells = <1>;
diff --git a/arch/arm/boot/dts/uniphier-pxs2.dtsi b/arch/arm/boot/dts/uniphier-pxs2.dtsi
index debcbd15c24b..641d96119d4f 100644
--- a/arch/arm/boot/dts/uniphier-pxs2.dtsi
+++ b/arch/arm/boot/dts/uniphier-pxs2.dtsi
@@ -506,10 +506,13 @@
interrupts = <0 66 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ether_rgmii>;
+ clock-names = "ether";
clocks = <&sys_clk 6>;
+ reset-names = "ether";
resets = <&sys_rst 6>;
phy-mode = "rgmii";
local-mac-address = [00 00 00 00 00 00];
+ socionext,syscon-phy-mode = <&soc_glue 0>;
mdio: mdio {
#address-cells = <1>;
diff --git a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
index 35714ff6f467..4488c8fe213a 100644
--- a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
+++ b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
@@ -17,426 +17,436 @@
* CHANGES TO vexpress-v2m.dtsi!
*/
- motherboard {
- model = "V2M-P1";
- arm,hbi = <0x190>;
- arm,vexpress,site = <0>;
- arm,v2m-memory-map = "rs1";
- compatible = "arm,vexpress,v2m-p1", "simple-bus";
- #address-cells = <2>; /* SMB chipselect number and offset */
- #size-cells = <1>;
- #interrupt-cells = <1>;
- ranges;
-
- flash@0,00000000 {
- compatible = "arm,vexpress-flash", "cfi-flash";
- reg = <0 0x00000000 0x04000000>,
- <4 0x00000000 0x04000000>;
- bank-width = <4>;
- };
+/ {
+ smb@8000000 {
+ motherboard {
+ model = "V2M-P1";
+ arm,hbi = <0x190>;
+ arm,vexpress,site = <0>;
+ arm,v2m-memory-map = "rs1";
+ compatible = "arm,vexpress,v2m-p1", "simple-bus";
+ #address-cells = <2>; /* SMB chipselect number and offset */
+ #size-cells = <1>;
+ #interrupt-cells = <1>;
+ ranges;
- psram@1,00000000 {
- compatible = "arm,vexpress-psram", "mtd-ram";
- reg = <1 0x00000000 0x02000000>;
- bank-width = <4>;
- };
+ flash@0,00000000 {
+ compatible = "arm,vexpress-flash", "cfi-flash";
+ reg = <0 0x00000000 0x04000000>,
+ <4 0x00000000 0x04000000>;
+ bank-width = <4>;
+ };
- v2m_video_ram: vram@2,00000000 {
- compatible = "arm,vexpress-vram";
- reg = <2 0x00000000 0x00800000>;
- };
+ psram@1,00000000 {
+ compatible = "arm,vexpress-psram", "mtd-ram";
+ reg = <1 0x00000000 0x02000000>;
+ bank-width = <4>;
+ };
- ethernet@2,02000000 {
- compatible = "smsc,lan9118", "smsc,lan9115";
- reg = <2 0x02000000 0x10000>;
- interrupts = <15>;
- phy-mode = "mii";
- reg-io-width = <4>;
- smsc,irq-active-high;
- smsc,irq-push-pull;
- vdd33a-supply = <&v2m_fixed_3v3>;
- vddvario-supply = <&v2m_fixed_3v3>;
- };
+ v2m_video_ram: vram@2,00000000 {
+ compatible = "arm,vexpress-vram";
+ reg = <2 0x00000000 0x00800000>;
+ };
- usb@2,03000000 {
- compatible = "nxp,usb-isp1761";
- reg = <2 0x03000000 0x20000>;
- interrupts = <16>;
- port1-otg;
- };
+ ethernet@2,02000000 {
+ compatible = "smsc,lan9118", "smsc,lan9115";
+ reg = <2 0x02000000 0x10000>;
+ interrupts = <15>;
+ phy-mode = "mii";
+ reg-io-width = <4>;
+ smsc,irq-active-high;
+ smsc,irq-push-pull;
+ vdd33a-supply = <&v2m_fixed_3v3>;
+ vddvario-supply = <&v2m_fixed_3v3>;
+ };
- iofpga@3,00000000 {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 3 0 0x200000>;
+ usb@2,03000000 {
+ compatible = "nxp,usb-isp1761";
+ reg = <2 0x03000000 0x20000>;
+ interrupts = <16>;
+ port1-otg;
+ };
- v2m_sysreg: sysreg@10000 {
- compatible = "arm,vexpress-sysreg";
- reg = <0x010000 0x1000>;
+ iofpga@3,00000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 3 0 0x200000>;
+
+ v2m_sysreg: sysreg@10000 {
+ compatible = "arm,vexpress-sysreg";
+ reg = <0x010000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x10000 0x1000>;
+
+ v2m_led_gpios: gpio@8 {
+ compatible = "arm,vexpress-sysreg,sys_led";
+ reg = <0x008 4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
- v2m_led_gpios: sys_led {
- compatible = "arm,vexpress-sysreg,sys_led";
- gpio-controller;
- #gpio-cells = <2>;
- };
+ v2m_mmc_gpios: gpio@48 {
+ compatible = "arm,vexpress-sysreg,sys_mci";
+ reg = <0x048 4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
- v2m_mmc_gpios: sys_mci {
- compatible = "arm,vexpress-sysreg,sys_mci";
- gpio-controller;
- #gpio-cells = <2>;
+ v2m_flash_gpios: gpio@4c {
+ compatible = "arm,vexpress-sysreg,sys_flash";
+ reg = <0x04c 4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
};
- v2m_flash_gpios: sys_flash {
- compatible = "arm,vexpress-sysreg,sys_flash";
- gpio-controller;
- #gpio-cells = <2>;
+ v2m_sysctl: sysctl@20000 {
+ compatible = "arm,sp810", "arm,primecell";
+ reg = <0x020000 0x1000>;
+ clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>;
+ clock-names = "refclk", "timclk", "apb_pclk";
+ #clock-cells = <1>;
+ clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
+ assigned-clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_sysctl 3>, <&v2m_sysctl 3>;
+ assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>;
};
- };
- v2m_sysctl: sysctl@20000 {
- compatible = "arm,sp810", "arm,primecell";
- reg = <0x020000 0x1000>;
- clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>;
- clock-names = "refclk", "timclk", "apb_pclk";
- #clock-cells = <1>;
- clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
- assigned-clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_sysctl 3>, <&v2m_sysctl 3>;
- assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>;
- };
+ /* PCI-E I2C bus */
+ v2m_i2c_pcie: i2c@30000 {
+ compatible = "arm,versatile-i2c";
+ reg = <0x030000 0x1000>;
- /* PCI-E I2C bus */
- v2m_i2c_pcie: i2c@30000 {
- compatible = "arm,versatile-i2c";
- reg = <0x030000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
- #address-cells = <1>;
- #size-cells = <0>;
+ pcie-switch@60 {
+ compatible = "idt,89hpes32h8";
+ reg = <0x60>;
+ };
+ };
- pcie-switch@60 {
- compatible = "idt,89hpes32h8";
- reg = <0x60>;
+ aaci@40000 {
+ compatible = "arm,pl041", "arm,primecell";
+ reg = <0x040000 0x1000>;
+ interrupts = <11>;
+ clocks = <&smbclk>;
+ clock-names = "apb_pclk";
};
- };
- aaci@40000 {
- compatible = "arm,pl041", "arm,primecell";
- reg = <0x040000 0x1000>;
- interrupts = <11>;
- clocks = <&smbclk>;
- clock-names = "apb_pclk";
- };
+ mmci@50000 {
+ compatible = "arm,pl180", "arm,primecell";
+ reg = <0x050000 0x1000>;
+ interrupts = <9 10>;
+ cd-gpios = <&v2m_mmc_gpios 0 0>;
+ wp-gpios = <&v2m_mmc_gpios 1 0>;
+ max-frequency = <12000000>;
+ vmmc-supply = <&v2m_fixed_3v3>;
+ clocks = <&v2m_clk24mhz>, <&smbclk>;
+ clock-names = "mclk", "apb_pclk";
+ };
- mmci@50000 {
- compatible = "arm,pl180", "arm,primecell";
- reg = <0x050000 0x1000>;
- interrupts = <9 10>;
- cd-gpios = <&v2m_mmc_gpios 0 0>;
- wp-gpios = <&v2m_mmc_gpios 1 0>;
- max-frequency = <12000000>;
- vmmc-supply = <&v2m_fixed_3v3>;
- clocks = <&v2m_clk24mhz>, <&smbclk>;
- clock-names = "mclk", "apb_pclk";
- };
+ kmi@60000 {
+ compatible = "arm,pl050", "arm,primecell";
+ reg = <0x060000 0x1000>;
+ interrupts = <12>;
+ clocks = <&v2m_clk24mhz>, <&smbclk>;
+ clock-names = "KMIREFCLK", "apb_pclk";
+ };
- kmi@60000 {
- compatible = "arm,pl050", "arm,primecell";
- reg = <0x060000 0x1000>;
- interrupts = <12>;
- clocks = <&v2m_clk24mhz>, <&smbclk>;
- clock-names = "KMIREFCLK", "apb_pclk";
- };
+ kmi@70000 {
+ compatible = "arm,pl050", "arm,primecell";
+ reg = <0x070000 0x1000>;
+ interrupts = <13>;
+ clocks = <&v2m_clk24mhz>, <&smbclk>;
+ clock-names = "KMIREFCLK", "apb_pclk";
+ };
- kmi@70000 {
- compatible = "arm,pl050", "arm,primecell";
- reg = <0x070000 0x1000>;
- interrupts = <13>;
- clocks = <&v2m_clk24mhz>, <&smbclk>;
- clock-names = "KMIREFCLK", "apb_pclk";
- };
+ v2m_serial0: uart@90000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x090000 0x1000>;
+ interrupts = <5>;
+ clocks = <&v2m_oscclk2>, <&smbclk>;
+ clock-names = "uartclk", "apb_pclk";
+ };
- v2m_serial0: uart@90000 {
- compatible = "arm,pl011", "arm,primecell";
- reg = <0x090000 0x1000>;
- interrupts = <5>;
- clocks = <&v2m_oscclk2>, <&smbclk>;
- clock-names = "uartclk", "apb_pclk";
- };
+ v2m_serial1: uart@a0000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0a0000 0x1000>;
+ interrupts = <6>;
+ clocks = <&v2m_oscclk2>, <&smbclk>;
+ clock-names = "uartclk", "apb_pclk";
+ };
- v2m_serial1: uart@a0000 {
- compatible = "arm,pl011", "arm,primecell";
- reg = <0x0a0000 0x1000>;
- interrupts = <6>;
- clocks = <&v2m_oscclk2>, <&smbclk>;
- clock-names = "uartclk", "apb_pclk";
- };
+ v2m_serial2: uart@b0000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0b0000 0x1000>;
+ interrupts = <7>;
+ clocks = <&v2m_oscclk2>, <&smbclk>;
+ clock-names = "uartclk", "apb_pclk";
+ };
- v2m_serial2: uart@b0000 {
- compatible = "arm,pl011", "arm,primecell";
- reg = <0x0b0000 0x1000>;
- interrupts = <7>;
- clocks = <&v2m_oscclk2>, <&smbclk>;
- clock-names = "uartclk", "apb_pclk";
- };
+ v2m_serial3: uart@c0000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0c0000 0x1000>;
+ interrupts = <8>;
+ clocks = <&v2m_oscclk2>, <&smbclk>;
+ clock-names = "uartclk", "apb_pclk";
+ };
- v2m_serial3: uart@c0000 {
- compatible = "arm,pl011", "arm,primecell";
- reg = <0x0c0000 0x1000>;
- interrupts = <8>;
- clocks = <&v2m_oscclk2>, <&smbclk>;
- clock-names = "uartclk", "apb_pclk";
- };
+ wdt@f0000 {
+ compatible = "arm,sp805", "arm,primecell";
+ reg = <0x0f0000 0x1000>;
+ interrupts = <0>;
+ clocks = <&v2m_refclk32khz>, <&smbclk>;
+ clock-names = "wdogclk", "apb_pclk";
+ };
- wdt@f0000 {
- compatible = "arm,sp805", "arm,primecell";
- reg = <0x0f0000 0x1000>;
- interrupts = <0>;
- clocks = <&v2m_refclk32khz>, <&smbclk>;
- clock-names = "wdogclk", "apb_pclk";
- };
+ v2m_timer01: timer@110000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0x110000 0x1000>;
+ interrupts = <2>;
+ clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&smbclk>;
+ clock-names = "timclken1", "timclken2", "apb_pclk";
+ };
- v2m_timer01: timer@110000 {
- compatible = "arm,sp804", "arm,primecell";
- reg = <0x110000 0x1000>;
- interrupts = <2>;
- clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&smbclk>;
- clock-names = "timclken1", "timclken2", "apb_pclk";
- };
+ v2m_timer23: timer@120000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0x120000 0x1000>;
+ interrupts = <3>;
+ clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&smbclk>;
+ clock-names = "timclken1", "timclken2", "apb_pclk";
+ };
- v2m_timer23: timer@120000 {
- compatible = "arm,sp804", "arm,primecell";
- reg = <0x120000 0x1000>;
- interrupts = <3>;
- clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&smbclk>;
- clock-names = "timclken1", "timclken2", "apb_pclk";
- };
+ /* DVI I2C bus */
+ v2m_i2c_dvi: i2c@160000 {
+ compatible = "arm,versatile-i2c";
+ reg = <0x160000 0x1000>;
- /* DVI I2C bus */
- v2m_i2c_dvi: i2c@160000 {
- compatible = "arm,versatile-i2c";
- reg = <0x160000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
- #address-cells = <1>;
- #size-cells = <0>;
+ dvi-transmitter@39 {
+ compatible = "sil,sii9022-tpi", "sil,sii9022";
+ reg = <0x39>;
+ };
- dvi-transmitter@39 {
- compatible = "sil,sii9022-tpi", "sil,sii9022";
- reg = <0x39>;
+ dvi-transmitter@60 {
+ compatible = "sil,sii9022-cpi", "sil,sii9022";
+ reg = <0x60>;
+ };
};
- dvi-transmitter@60 {
- compatible = "sil,sii9022-cpi", "sil,sii9022";
- reg = <0x60>;
+ rtc@170000 {
+ compatible = "arm,pl031", "arm,primecell";
+ reg = <0x170000 0x1000>;
+ interrupts = <4>;
+ clocks = <&smbclk>;
+ clock-names = "apb_pclk";
};
- };
- rtc@170000 {
- compatible = "arm,pl031", "arm,primecell";
- reg = <0x170000 0x1000>;
- interrupts = <4>;
- clocks = <&smbclk>;
- clock-names = "apb_pclk";
- };
-
- compact-flash@1a0000 {
- compatible = "arm,vexpress-cf", "ata-generic";
- reg = <0x1a0000 0x100
- 0x1a0100 0xf00>;
- reg-shift = <2>;
- };
-
- clcd@1f0000 {
- compatible = "arm,pl111", "arm,primecell";
- reg = <0x1f0000 0x1000>;
- interrupt-names = "combined";
- interrupts = <14>;
- clocks = <&v2m_oscclk1>, <&smbclk>;
- clock-names = "clcdclk", "apb_pclk";
- memory-region = <&v2m_video_ram>;
- max-memory-bandwidth = <50350000>; /* 16bpp @ 25.175MHz */
-
- port {
- v2m_clcd_pads: endpoint {
- remote-endpoint = <&v2m_clcd_panel>;
- arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
- };
+ compact-flash@1a0000 {
+ compatible = "arm,vexpress-cf", "ata-generic";
+ reg = <0x1a0000 0x100
+ 0x1a0100 0xf00>;
+ reg-shift = <2>;
};
- panel {
- compatible = "panel-dpi";
+ clcd@1f0000 {
+ compatible = "arm,pl111", "arm,primecell";
+ reg = <0x1f0000 0x1000>;
+ interrupt-names = "combined";
+ interrupts = <14>;
+ clocks = <&v2m_oscclk1>, <&smbclk>;
+ clock-names = "clcdclk", "apb_pclk";
+ memory-region = <&v2m_video_ram>;
+ max-memory-bandwidth = <50350000>; /* 16bpp @ 25.175MHz */
port {
- v2m_clcd_panel: endpoint {
- remote-endpoint = <&v2m_clcd_pads>;
+ v2m_clcd_pads: endpoint {
+ remote-endpoint = <&v2m_clcd_panel>;
+ arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
};
};
- panel-timing {
- clock-frequency = <25175000>;
- hactive = <640>;
- hback-porch = <40>;
- hfront-porch = <24>;
- hsync-len = <96>;
- vactive = <480>;
- vback-porch = <32>;
- vfront-porch = <11>;
- vsync-len = <2>;
+ panel {
+ compatible = "panel-dpi";
+
+ port {
+ v2m_clcd_panel: endpoint {
+ remote-endpoint = <&v2m_clcd_pads>;
+ };
+ };
+
+ panel-timing {
+ clock-frequency = <25175000>;
+ hactive = <640>;
+ hback-porch = <40>;
+ hfront-porch = <24>;
+ hsync-len = <96>;
+ vactive = <480>;
+ vback-porch = <32>;
+ vfront-porch = <11>;
+ vsync-len = <2>;
+ };
};
};
};
- };
- v2m_fixed_3v3: fixed-regulator-0 {
- compatible = "regulator-fixed";
- regulator-name = "3V3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
+ v2m_fixed_3v3: fixed-regulator-0 {
+ compatible = "regulator-fixed";
+ regulator-name = "3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
- v2m_clk24mhz: clk24mhz {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <24000000>;
- clock-output-names = "v2m:clk24mhz";
- };
+ v2m_clk24mhz: clk24mhz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24000000>;
+ clock-output-names = "v2m:clk24mhz";
+ };
- v2m_refclk1mhz: refclk1mhz {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <1000000>;
- clock-output-names = "v2m:refclk1mhz";
- };
+ v2m_refclk1mhz: refclk1mhz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <1000000>;
+ clock-output-names = "v2m:refclk1mhz";
+ };
- v2m_refclk32khz: refclk32khz {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <32768>;
- clock-output-names = "v2m:refclk32khz";
- };
+ v2m_refclk32khz: refclk32khz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-output-names = "v2m:refclk32khz";
+ };
- leds {
- compatible = "gpio-leds";
+ leds {
+ compatible = "gpio-leds";
- user1 {
- label = "v2m:green:user1";
- gpios = <&v2m_led_gpios 0 0>;
- linux,default-trigger = "heartbeat";
- };
+ user1 {
+ label = "v2m:green:user1";
+ gpios = <&v2m_led_gpios 0 0>;
+ linux,default-trigger = "heartbeat";
+ };
- user2 {
- label = "v2m:green:user2";
- gpios = <&v2m_led_gpios 1 0>;
- linux,default-trigger = "mmc0";
- };
+ user2 {
+ label = "v2m:green:user2";
+ gpios = <&v2m_led_gpios 1 0>;
+ linux,default-trigger = "mmc0";
+ };
- user3 {
- label = "v2m:green:user3";
- gpios = <&v2m_led_gpios 2 0>;
- linux,default-trigger = "cpu0";
- };
+ user3 {
+ label = "v2m:green:user3";
+ gpios = <&v2m_led_gpios 2 0>;
+ linux,default-trigger = "cpu0";
+ };
- user4 {
- label = "v2m:green:user4";
- gpios = <&v2m_led_gpios 3 0>;
- linux,default-trigger = "cpu1";
- };
+ user4 {
+ label = "v2m:green:user4";
+ gpios = <&v2m_led_gpios 3 0>;
+ linux,default-trigger = "cpu1";
+ };
- user5 {
- label = "v2m:green:user5";
- gpios = <&v2m_led_gpios 4 0>;
- linux,default-trigger = "cpu2";
- };
+ user5 {
+ label = "v2m:green:user5";
+ gpios = <&v2m_led_gpios 4 0>;
+ linux,default-trigger = "cpu2";
+ };
- user6 {
- label = "v2m:green:user6";
- gpios = <&v2m_led_gpios 5 0>;
- linux,default-trigger = "cpu3";
- };
+ user6 {
+ label = "v2m:green:user6";
+ gpios = <&v2m_led_gpios 5 0>;
+ linux,default-trigger = "cpu3";
+ };
- user7 {
- label = "v2m:green:user7";
- gpios = <&v2m_led_gpios 6 0>;
- linux,default-trigger = "cpu4";
- };
+ user7 {
+ label = "v2m:green:user7";
+ gpios = <&v2m_led_gpios 6 0>;
+ linux,default-trigger = "cpu4";
+ };
- user8 {
- label = "v2m:green:user8";
- gpios = <&v2m_led_gpios 7 0>;
- linux,default-trigger = "cpu5";
+ user8 {
+ label = "v2m:green:user8";
+ gpios = <&v2m_led_gpios 7 0>;
+ linux,default-trigger = "cpu5";
+ };
};
- };
- mcc {
- compatible = "arm,vexpress,config-bus";
- arm,vexpress,config-bridge = <&v2m_sysreg>;
+ mcc {
+ compatible = "arm,vexpress,config-bus";
+ arm,vexpress,config-bridge = <&v2m_sysreg>;
- oscclk0 {
- /* MCC static memory clock */
- compatible = "arm,vexpress-osc";
- arm,vexpress-sysreg,func = <1 0>;
- freq-range = <25000000 60000000>;
- #clock-cells = <0>;
- clock-output-names = "v2m:oscclk0";
- };
+ oscclk0 {
+ /* MCC static memory clock */
+ compatible = "arm,vexpress-osc";
+ arm,vexpress-sysreg,func = <1 0>;
+ freq-range = <25000000 60000000>;
+ #clock-cells = <0>;
+ clock-output-names = "v2m:oscclk0";
+ };
- v2m_oscclk1: oscclk1 {
- /* CLCD clock */
- compatible = "arm,vexpress-osc";
- arm,vexpress-sysreg,func = <1 1>;
- freq-range = <23750000 65000000>;
- #clock-cells = <0>;
- clock-output-names = "v2m:oscclk1";
- };
+ v2m_oscclk1: oscclk1 {
+ /* CLCD clock */
+ compatible = "arm,vexpress-osc";
+ arm,vexpress-sysreg,func = <1 1>;
+ freq-range = <23750000 65000000>;
+ #clock-cells = <0>;
+ clock-output-names = "v2m:oscclk1";
+ };
- v2m_oscclk2: oscclk2 {
- /* IO FPGA peripheral clock */
- compatible = "arm,vexpress-osc";
- arm,vexpress-sysreg,func = <1 2>;
- freq-range = <24000000 24000000>;
- #clock-cells = <0>;
- clock-output-names = "v2m:oscclk2";
- };
+ v2m_oscclk2: oscclk2 {
+ /* IO FPGA peripheral clock */
+ compatible = "arm,vexpress-osc";
+ arm,vexpress-sysreg,func = <1 2>;
+ freq-range = <24000000 24000000>;
+ #clock-cells = <0>;
+ clock-output-names = "v2m:oscclk2";
+ };
- volt-vio {
- /* Logic level voltage */
- compatible = "arm,vexpress-volt";
- arm,vexpress-sysreg,func = <2 0>;
- regulator-name = "VIO";
- regulator-always-on;
- label = "VIO";
- };
+ volt-vio {
+ /* Logic level voltage */
+ compatible = "arm,vexpress-volt";
+ arm,vexpress-sysreg,func = <2 0>;
+ regulator-name = "VIO";
+ regulator-always-on;
+ label = "VIO";
+ };
- temp-mcc {
- /* MCC internal operating temperature */
- compatible = "arm,vexpress-temp";
- arm,vexpress-sysreg,func = <4 0>;
- label = "MCC";
- };
+ temp-mcc {
+ /* MCC internal operating temperature */
+ compatible = "arm,vexpress-temp";
+ arm,vexpress-sysreg,func = <4 0>;
+ label = "MCC";
+ };
- reset {
- compatible = "arm,vexpress-reset";
- arm,vexpress-sysreg,func = <5 0>;
- };
+ reset {
+ compatible = "arm,vexpress-reset";
+ arm,vexpress-sysreg,func = <5 0>;
+ };
- muxfpga {
- compatible = "arm,vexpress-muxfpga";
- arm,vexpress-sysreg,func = <7 0>;
- };
+ muxfpga {
+ compatible = "arm,vexpress-muxfpga";
+ arm,vexpress-sysreg,func = <7 0>;
+ };
- shutdown {
- compatible = "arm,vexpress-shutdown";
- arm,vexpress-sysreg,func = <8 0>;
- };
+ shutdown {
+ compatible = "arm,vexpress-shutdown";
+ arm,vexpress-sysreg,func = <8 0>;
+ };
- reboot {
- compatible = "arm,vexpress-reboot";
- arm,vexpress-sysreg,func = <9 0>;
- };
+ reboot {
+ compatible = "arm,vexpress-reboot";
+ arm,vexpress-sysreg,func = <9 0>;
+ };
- dvimode {
- compatible = "arm,vexpress-dvimode";
- arm,vexpress-sysreg,func = <11 0>;
+ dvimode {
+ compatible = "arm,vexpress-dvimode";
+ arm,vexpress-sysreg,func = <11 0>;
+ };
};
};
};
+};
diff --git a/arch/arm/boot/dts/vexpress-v2m.dtsi b/arch/arm/boot/dts/vexpress-v2m.dtsi
index b0021a816028..4db42f6326a3 100644
--- a/arch/arm/boot/dts/vexpress-v2m.dtsi
+++ b/arch/arm/boot/dts/vexpress-v2m.dtsi
@@ -18,425 +18,435 @@
* CHANGES TO vexpress-v2m-rs1.dtsi!
*/
- motherboard {
- model = "V2M-P1";
- arm,hbi = <0x190>;
- arm,vexpress,site = <0>;
- compatible = "arm,vexpress,v2m-p1", "simple-bus";
- #address-cells = <2>; /* SMB chipselect number and offset */
- #size-cells = <1>;
- #interrupt-cells = <1>;
- ranges;
-
- flash@0,00000000 {
- compatible = "arm,vexpress-flash", "cfi-flash";
- reg = <0 0x00000000 0x04000000>,
- <1 0x00000000 0x04000000>;
- bank-width = <4>;
- };
+/ {
+ smb@4000000 {
+ motherboard {
+ model = "V2M-P1";
+ arm,hbi = <0x190>;
+ arm,vexpress,site = <0>;
+ compatible = "arm,vexpress,v2m-p1", "simple-bus";
+ #address-cells = <2>; /* SMB chipselect number and offset */
+ #size-cells = <1>;
+ #interrupt-cells = <1>;
+ ranges;
- psram@2,00000000 {
- compatible = "arm,vexpress-psram", "mtd-ram";
- reg = <2 0x00000000 0x02000000>;
- bank-width = <4>;
- };
+ flash@0,00000000 {
+ compatible = "arm,vexpress-flash", "cfi-flash";
+ reg = <0 0x00000000 0x04000000>,
+ <1 0x00000000 0x04000000>;
+ bank-width = <4>;
+ };
- v2m_video_ram: vram@3,00000000 {
- compatible = "arm,vexpress-vram";
- reg = <3 0x00000000 0x00800000>;
- };
+ psram@2,00000000 {
+ compatible = "arm,vexpress-psram", "mtd-ram";
+ reg = <2 0x00000000 0x02000000>;
+ bank-width = <4>;
+ };
- ethernet@3,02000000 {
- compatible = "smsc,lan9118", "smsc,lan9115";
- reg = <3 0x02000000 0x10000>;
- interrupts = <15>;
- phy-mode = "mii";
- reg-io-width = <4>;
- smsc,irq-active-high;
- smsc,irq-push-pull;
- vdd33a-supply = <&v2m_fixed_3v3>;
- vddvario-supply = <&v2m_fixed_3v3>;
- };
+ v2m_video_ram: vram@3,00000000 {
+ compatible = "arm,vexpress-vram";
+ reg = <3 0x00000000 0x00800000>;
+ };
- usb@3,03000000 {
- compatible = "nxp,usb-isp1761";
- reg = <3 0x03000000 0x20000>;
- interrupts = <16>;
- port1-otg;
- };
+ ethernet@3,02000000 {
+ compatible = "smsc,lan9118", "smsc,lan9115";
+ reg = <3 0x02000000 0x10000>;
+ interrupts = <15>;
+ phy-mode = "mii";
+ reg-io-width = <4>;
+ smsc,irq-active-high;
+ smsc,irq-push-pull;
+ vdd33a-supply = <&v2m_fixed_3v3>;
+ vddvario-supply = <&v2m_fixed_3v3>;
+ };
- iofpga@7,00000000 {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 7 0 0x20000>;
+ usb@3,03000000 {
+ compatible = "nxp,usb-isp1761";
+ reg = <3 0x03000000 0x20000>;
+ interrupts = <16>;
+ port1-otg;
+ };
- v2m_sysreg: sysreg@0 {
- compatible = "arm,vexpress-sysreg";
- reg = <0x00000 0x1000>;
+ iofpga@7,00000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 7 0 0x20000>;
+
+ v2m_sysreg: sysreg@0 {
+ compatible = "arm,vexpress-sysreg";
+ reg = <0x00000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0x1000>;
+
+ v2m_led_gpios: gpio@8 {
+ compatible = "arm,vexpress-sysreg,sys_led";
+ reg = <0x008 4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
- v2m_led_gpios: sys_led {
- compatible = "arm,vexpress-sysreg,sys_led";
- gpio-controller;
- #gpio-cells = <2>;
- };
+ v2m_mmc_gpios: gpio@48 {
+ compatible = "arm,vexpress-sysreg,sys_mci";
+ reg = <0x048 4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
- v2m_mmc_gpios: sys_mci {
- compatible = "arm,vexpress-sysreg,sys_mci";
- gpio-controller;
- #gpio-cells = <2>;
+ v2m_flash_gpios: gpio@4c {
+ compatible = "arm,vexpress-sysreg,sys_flash";
+ reg = <0x04c 4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
};
- v2m_flash_gpios: sys_flash {
- compatible = "arm,vexpress-sysreg,sys_flash";
- gpio-controller;
- #gpio-cells = <2>;
+ v2m_sysctl: sysctl@1000 {
+ compatible = "arm,sp810", "arm,primecell";
+ reg = <0x01000 0x1000>;
+ clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>;
+ clock-names = "refclk", "timclk", "apb_pclk";
+ #clock-cells = <1>;
+ clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
+ assigned-clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_sysctl 3>, <&v2m_sysctl 3>;
+ assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>;
};
- };
- v2m_sysctl: sysctl@1000 {
- compatible = "arm,sp810", "arm,primecell";
- reg = <0x01000 0x1000>;
- clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>;
- clock-names = "refclk", "timclk", "apb_pclk";
- #clock-cells = <1>;
- clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
- assigned-clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_sysctl 3>, <&v2m_sysctl 3>;
- assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>;
- };
+ /* PCI-E I2C bus */
+ v2m_i2c_pcie: i2c@2000 {
+ compatible = "arm,versatile-i2c";
+ reg = <0x02000 0x1000>;
- /* PCI-E I2C bus */
- v2m_i2c_pcie: i2c@2000 {
- compatible = "arm,versatile-i2c";
- reg = <0x02000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
- #address-cells = <1>;
- #size-cells = <0>;
+ pcie-switch@60 {
+ compatible = "idt,89hpes32h8";
+ reg = <0x60>;
+ };
+ };
- pcie-switch@60 {
- compatible = "idt,89hpes32h8";
- reg = <0x60>;
+ aaci@4000 {
+ compatible = "arm,pl041", "arm,primecell";
+ reg = <0x04000 0x1000>;
+ interrupts = <11>;
+ clocks = <&smbclk>;
+ clock-names = "apb_pclk";
};
- };
- aaci@4000 {
- compatible = "arm,pl041", "arm,primecell";
- reg = <0x04000 0x1000>;
- interrupts = <11>;
- clocks = <&smbclk>;
- clock-names = "apb_pclk";
- };
+ mmci@5000 {
+ compatible = "arm,pl180", "arm,primecell";
+ reg = <0x05000 0x1000>;
+ interrupts = <9 10>;
+ cd-gpios = <&v2m_mmc_gpios 0 0>;
+ wp-gpios = <&v2m_mmc_gpios 1 0>;
+ max-frequency = <12000000>;
+ vmmc-supply = <&v2m_fixed_3v3>;
+ clocks = <&v2m_clk24mhz>, <&smbclk>;
+ clock-names = "mclk", "apb_pclk";
+ };
- mmci@5000 {
- compatible = "arm,pl180", "arm,primecell";
- reg = <0x05000 0x1000>;
- interrupts = <9 10>;
- cd-gpios = <&v2m_mmc_gpios 0 0>;
- wp-gpios = <&v2m_mmc_gpios 1 0>;
- max-frequency = <12000000>;
- vmmc-supply = <&v2m_fixed_3v3>;
- clocks = <&v2m_clk24mhz>, <&smbclk>;
- clock-names = "mclk", "apb_pclk";
- };
+ kmi@6000 {
+ compatible = "arm,pl050", "arm,primecell";
+ reg = <0x06000 0x1000>;
+ interrupts = <12>;
+ clocks = <&v2m_clk24mhz>, <&smbclk>;
+ clock-names = "KMIREFCLK", "apb_pclk";
+ };
- kmi@6000 {
- compatible = "arm,pl050", "arm,primecell";
- reg = <0x06000 0x1000>;
- interrupts = <12>;
- clocks = <&v2m_clk24mhz>, <&smbclk>;
- clock-names = "KMIREFCLK", "apb_pclk";
- };
+ kmi@7000 {
+ compatible = "arm,pl050", "arm,primecell";
+ reg = <0x07000 0x1000>;
+ interrupts = <13>;
+ clocks = <&v2m_clk24mhz>, <&smbclk>;
+ clock-names = "KMIREFCLK", "apb_pclk";
+ };
- kmi@7000 {
- compatible = "arm,pl050", "arm,primecell";
- reg = <0x07000 0x1000>;
- interrupts = <13>;
- clocks = <&v2m_clk24mhz>, <&smbclk>;
- clock-names = "KMIREFCLK", "apb_pclk";
- };
+ v2m_serial0: uart@9000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x09000 0x1000>;
+ interrupts = <5>;
+ clocks = <&v2m_oscclk2>, <&smbclk>;
+ clock-names = "uartclk", "apb_pclk";
+ };
- v2m_serial0: uart@9000 {
- compatible = "arm,pl011", "arm,primecell";
- reg = <0x09000 0x1000>;
- interrupts = <5>;
- clocks = <&v2m_oscclk2>, <&smbclk>;
- clock-names = "uartclk", "apb_pclk";
- };
+ v2m_serial1: uart@a000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0a000 0x1000>;
+ interrupts = <6>;
+ clocks = <&v2m_oscclk2>, <&smbclk>;
+ clock-names = "uartclk", "apb_pclk";
+ };
- v2m_serial1: uart@a000 {
- compatible = "arm,pl011", "arm,primecell";
- reg = <0x0a000 0x1000>;
- interrupts = <6>;
- clocks = <&v2m_oscclk2>, <&smbclk>;
- clock-names = "uartclk", "apb_pclk";
- };
+ v2m_serial2: uart@b000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0b000 0x1000>;
+ interrupts = <7>;
+ clocks = <&v2m_oscclk2>, <&smbclk>;
+ clock-names = "uartclk", "apb_pclk";
+ };
- v2m_serial2: uart@b000 {
- compatible = "arm,pl011", "arm,primecell";
- reg = <0x0b000 0x1000>;
- interrupts = <7>;
- clocks = <&v2m_oscclk2>, <&smbclk>;
- clock-names = "uartclk", "apb_pclk";
- };
+ v2m_serial3: uart@c000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0c000 0x1000>;
+ interrupts = <8>;
+ clocks = <&v2m_oscclk2>, <&smbclk>;
+ clock-names = "uartclk", "apb_pclk";
+ };
- v2m_serial3: uart@c000 {
- compatible = "arm,pl011", "arm,primecell";
- reg = <0x0c000 0x1000>;
- interrupts = <8>;
- clocks = <&v2m_oscclk2>, <&smbclk>;
- clock-names = "uartclk", "apb_pclk";
- };
+ wdt@f000 {
+ compatible = "arm,sp805", "arm,primecell";
+ reg = <0x0f000 0x1000>;
+ interrupts = <0>;
+ clocks = <&v2m_refclk32khz>, <&smbclk>;
+ clock-names = "wdogclk", "apb_pclk";
+ };
- wdt@f000 {
- compatible = "arm,sp805", "arm,primecell";
- reg = <0x0f000 0x1000>;
- interrupts = <0>;
- clocks = <&v2m_refclk32khz>, <&smbclk>;
- clock-names = "wdogclk", "apb_pclk";
- };
+ v2m_timer01: timer@11000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0x11000 0x1000>;
+ interrupts = <2>;
+ clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&smbclk>;
+ clock-names = "timclken1", "timclken2", "apb_pclk";
+ };
- v2m_timer01: timer@11000 {
- compatible = "arm,sp804", "arm,primecell";
- reg = <0x11000 0x1000>;
- interrupts = <2>;
- clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&smbclk>;
- clock-names = "timclken1", "timclken2", "apb_pclk";
- };
+ v2m_timer23: timer@12000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0x12000 0x1000>;
+ interrupts = <3>;
+ clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&smbclk>;
+ clock-names = "timclken1", "timclken2", "apb_pclk";
+ };
- v2m_timer23: timer@12000 {
- compatible = "arm,sp804", "arm,primecell";
- reg = <0x12000 0x1000>;
- interrupts = <3>;
- clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&smbclk>;
- clock-names = "timclken1", "timclken2", "apb_pclk";
- };
+ /* DVI I2C bus */
+ v2m_i2c_dvi: i2c@16000 {
+ compatible = "arm,versatile-i2c";
+ reg = <0x16000 0x1000>;
- /* DVI I2C bus */
- v2m_i2c_dvi: i2c@16000 {
- compatible = "arm,versatile-i2c";
- reg = <0x16000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
- #address-cells = <1>;
- #size-cells = <0>;
+ dvi-transmitter@39 {
+ compatible = "sil,sii9022-tpi", "sil,sii9022";
+ reg = <0x39>;
+ };
- dvi-transmitter@39 {
- compatible = "sil,sii9022-tpi", "sil,sii9022";
- reg = <0x39>;
+ dvi-transmitter@60 {
+ compatible = "sil,sii9022-cpi", "sil,sii9022";
+ reg = <0x60>;
+ };
};
- dvi-transmitter@60 {
- compatible = "sil,sii9022-cpi", "sil,sii9022";
- reg = <0x60>;
+ rtc@17000 {
+ compatible = "arm,pl031", "arm,primecell";
+ reg = <0x17000 0x1000>;
+ interrupts = <4>;
+ clocks = <&smbclk>;
+ clock-names = "apb_pclk";
};
- };
- rtc@17000 {
- compatible = "arm,pl031", "arm,primecell";
- reg = <0x17000 0x1000>;
- interrupts = <4>;
- clocks = <&smbclk>;
- clock-names = "apb_pclk";
- };
-
- compact-flash@1a000 {
- compatible = "arm,vexpress-cf", "ata-generic";
- reg = <0x1a000 0x100
- 0x1a100 0xf00>;
- reg-shift = <2>;
- };
-
- clcd@1f000 {
- compatible = "arm,pl111", "arm,primecell";
- reg = <0x1f000 0x1000>;
- interrupt-names = "combined";
- interrupts = <14>;
- clocks = <&v2m_oscclk1>, <&smbclk>;
- clock-names = "clcdclk", "apb_pclk";
- memory-region = <&v2m_video_ram>;
- max-memory-bandwidth = <50350000>; /* 16bpp @ 25.175MHz */
-
- port {
- v2m_clcd_pads: endpoint {
- remote-endpoint = <&v2m_clcd_panel>;
- arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
- };
+ compact-flash@1a000 {
+ compatible = "arm,vexpress-cf", "ata-generic";
+ reg = <0x1a000 0x100
+ 0x1a100 0xf00>;
+ reg-shift = <2>;
};
- panel {
- compatible = "panel-dpi";
+ clcd@1f000 {
+ compatible = "arm,pl111", "arm,primecell";
+ reg = <0x1f000 0x1000>;
+ interrupt-names = "combined";
+ interrupts = <14>;
+ clocks = <&v2m_oscclk1>, <&smbclk>;
+ clock-names = "clcdclk", "apb_pclk";
+ memory-region = <&v2m_video_ram>;
+ max-memory-bandwidth = <50350000>; /* 16bpp @ 25.175MHz */
port {
- v2m_clcd_panel: endpoint {
- remote-endpoint = <&v2m_clcd_pads>;
+ v2m_clcd_pads: endpoint {
+ remote-endpoint = <&v2m_clcd_panel>;
+ arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
};
};
- panel-timing {
- clock-frequency = <25175000>;
- hactive = <640>;
- hback-porch = <40>;
- hfront-porch = <24>;
- hsync-len = <96>;
- vactive = <480>;
- vback-porch = <32>;
- vfront-porch = <11>;
- vsync-len = <2>;
+ panel {
+ compatible = "panel-dpi";
+
+ port {
+ v2m_clcd_panel: endpoint {
+ remote-endpoint = <&v2m_clcd_pads>;
+ };
+ };
+
+ panel-timing {
+ clock-frequency = <25175000>;
+ hactive = <640>;
+ hback-porch = <40>;
+ hfront-porch = <24>;
+ hsync-len = <96>;
+ vactive = <480>;
+ vback-porch = <32>;
+ vfront-porch = <11>;
+ vsync-len = <2>;
+ };
};
};
};
- };
- v2m_fixed_3v3: fixed-regulator-0 {
- compatible = "regulator-fixed";
- regulator-name = "3V3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
+ v2m_fixed_3v3: fixed-regulator-0 {
+ compatible = "regulator-fixed";
+ regulator-name = "3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
- v2m_clk24mhz: clk24mhz {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <24000000>;
- clock-output-names = "v2m:clk24mhz";
- };
+ v2m_clk24mhz: clk24mhz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24000000>;
+ clock-output-names = "v2m:clk24mhz";
+ };
- v2m_refclk1mhz: refclk1mhz {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <1000000>;
- clock-output-names = "v2m:refclk1mhz";
- };
+ v2m_refclk1mhz: refclk1mhz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <1000000>;
+ clock-output-names = "v2m:refclk1mhz";
+ };
- v2m_refclk32khz: refclk32khz {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <32768>;
- clock-output-names = "v2m:refclk32khz";
- };
+ v2m_refclk32khz: refclk32khz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-output-names = "v2m:refclk32khz";
+ };
- leds {
- compatible = "gpio-leds";
+ leds {
+ compatible = "gpio-leds";
- user1 {
- label = "v2m:green:user1";
- gpios = <&v2m_led_gpios 0 0>;
- linux,default-trigger = "heartbeat";
- };
+ user1 {
+ label = "v2m:green:user1";
+ gpios = <&v2m_led_gpios 0 0>;
+ linux,default-trigger = "heartbeat";
+ };
- user2 {
- label = "v2m:green:user2";
- gpios = <&v2m_led_gpios 1 0>;
- linux,default-trigger = "mmc0";
- };
+ user2 {
+ label = "v2m:green:user2";
+ gpios = <&v2m_led_gpios 1 0>;
+ linux,default-trigger = "mmc0";
+ };
- user3 {
- label = "v2m:green:user3";
- gpios = <&v2m_led_gpios 2 0>;
- linux,default-trigger = "cpu0";
- };
+ user3 {
+ label = "v2m:green:user3";
+ gpios = <&v2m_led_gpios 2 0>;
+ linux,default-trigger = "cpu0";
+ };
- user4 {
- label = "v2m:green:user4";
- gpios = <&v2m_led_gpios 3 0>;
- linux,default-trigger = "cpu1";
- };
+ user4 {
+ label = "v2m:green:user4";
+ gpios = <&v2m_led_gpios 3 0>;
+ linux,default-trigger = "cpu1";
+ };
- user5 {
- label = "v2m:green:user5";
- gpios = <&v2m_led_gpios 4 0>;
- linux,default-trigger = "cpu2";
- };
+ user5 {
+ label = "v2m:green:user5";
+ gpios = <&v2m_led_gpios 4 0>;
+ linux,default-trigger = "cpu2";
+ };
- user6 {
- label = "v2m:green:user6";
- gpios = <&v2m_led_gpios 5 0>;
- linux,default-trigger = "cpu3";
- };
+ user6 {
+ label = "v2m:green:user6";
+ gpios = <&v2m_led_gpios 5 0>;
+ linux,default-trigger = "cpu3";
+ };
- user7 {
- label = "v2m:green:user7";
- gpios = <&v2m_led_gpios 6 0>;
- linux,default-trigger = "cpu4";
- };
+ user7 {
+ label = "v2m:green:user7";
+ gpios = <&v2m_led_gpios 6 0>;
+ linux,default-trigger = "cpu4";
+ };
- user8 {
- label = "v2m:green:user8";
- gpios = <&v2m_led_gpios 7 0>;
- linux,default-trigger = "cpu5";
+ user8 {
+ label = "v2m:green:user8";
+ gpios = <&v2m_led_gpios 7 0>;
+ linux,default-trigger = "cpu5";
+ };
};
- };
- mcc {
- compatible = "arm,vexpress,config-bus";
- arm,vexpress,config-bridge = <&v2m_sysreg>;
+ mcc {
+ compatible = "arm,vexpress,config-bus";
+ arm,vexpress,config-bridge = <&v2m_sysreg>;
- oscclk0 {
- /* MCC static memory clock */
- compatible = "arm,vexpress-osc";
- arm,vexpress-sysreg,func = <1 0>;
- freq-range = <25000000 60000000>;
- #clock-cells = <0>;
- clock-output-names = "v2m:oscclk0";
- };
+ oscclk0 {
+ /* MCC static memory clock */
+ compatible = "arm,vexpress-osc";
+ arm,vexpress-sysreg,func = <1 0>;
+ freq-range = <25000000 60000000>;
+ #clock-cells = <0>;
+ clock-output-names = "v2m:oscclk0";
+ };
- v2m_oscclk1: oscclk1 {
- /* CLCD clock */
- compatible = "arm,vexpress-osc";
- arm,vexpress-sysreg,func = <1 1>;
- freq-range = <23750000 65000000>;
- #clock-cells = <0>;
- clock-output-names = "v2m:oscclk1";
- };
+ v2m_oscclk1: oscclk1 {
+ /* CLCD clock */
+ compatible = "arm,vexpress-osc";
+ arm,vexpress-sysreg,func = <1 1>;
+ freq-range = <23750000 65000000>;
+ #clock-cells = <0>;
+ clock-output-names = "v2m:oscclk1";
+ };
- v2m_oscclk2: oscclk2 {
- /* IO FPGA peripheral clock */
- compatible = "arm,vexpress-osc";
- arm,vexpress-sysreg,func = <1 2>;
- freq-range = <24000000 24000000>;
- #clock-cells = <0>;
- clock-output-names = "v2m:oscclk2";
- };
+ v2m_oscclk2: oscclk2 {
+ /* IO FPGA peripheral clock */
+ compatible = "arm,vexpress-osc";
+ arm,vexpress-sysreg,func = <1 2>;
+ freq-range = <24000000 24000000>;
+ #clock-cells = <0>;
+ clock-output-names = "v2m:oscclk2";
+ };
- volt-vio {
- /* Logic level voltage */
- compatible = "arm,vexpress-volt";
- arm,vexpress-sysreg,func = <2 0>;
- regulator-name = "VIO";
- regulator-always-on;
- label = "VIO";
- };
+ volt-vio {
+ /* Logic level voltage */
+ compatible = "arm,vexpress-volt";
+ arm,vexpress-sysreg,func = <2 0>;
+ regulator-name = "VIO";
+ regulator-always-on;
+ label = "VIO";
+ };
- temp-mcc {
- /* MCC internal operating temperature */
- compatible = "arm,vexpress-temp";
- arm,vexpress-sysreg,func = <4 0>;
- label = "MCC";
- };
+ temp-mcc {
+ /* MCC internal operating temperature */
+ compatible = "arm,vexpress-temp";
+ arm,vexpress-sysreg,func = <4 0>;
+ label = "MCC";
+ };
- reset {
- compatible = "arm,vexpress-reset";
- arm,vexpress-sysreg,func = <5 0>;
- };
+ reset {
+ compatible = "arm,vexpress-reset";
+ arm,vexpress-sysreg,func = <5 0>;
+ };
- muxfpga {
- compatible = "arm,vexpress-muxfpga";
- arm,vexpress-sysreg,func = <7 0>;
- };
+ muxfpga {
+ compatible = "arm,vexpress-muxfpga";
+ arm,vexpress-sysreg,func = <7 0>;
+ };
- shutdown {
- compatible = "arm,vexpress-shutdown";
- arm,vexpress-sysreg,func = <8 0>;
- };
+ shutdown {
+ compatible = "arm,vexpress-shutdown";
+ arm,vexpress-sysreg,func = <8 0>;
+ };
- reboot {
- compatible = "arm,vexpress-reboot";
- arm,vexpress-sysreg,func = <9 0>;
- };
+ reboot {
+ compatible = "arm,vexpress-reboot";
+ arm,vexpress-sysreg,func = <9 0>;
+ };
- dvimode {
- compatible = "arm,vexpress-dvimode";
- arm,vexpress-sysreg,func = <11 0>;
+ dvimode {
+ compatible = "arm,vexpress-dvimode";
+ arm,vexpress-sysreg,func = <11 0>;
+ };
};
};
};
+}; \ No newline at end of file
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts
index a8ac4e2ed290..3971427a105b 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts
+++ b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts
@@ -9,6 +9,7 @@
*/
/dts-v1/;
+#include "vexpress-v2m-rs1.dtsi"
/ {
model = "V2P-CA15";
@@ -278,8 +279,6 @@
<0 0 40 &gic 0 40 4>,
<0 0 41 &gic 0 41 4>,
<0 0 42 &gic 0 42 4>;
-
- /include/ "vexpress-v2m-rs1.dtsi"
};
site2: hsb@40000000 {
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
index a4c7713edfcd..ac6b90e9d806 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
+++ b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
@@ -9,6 +9,7 @@
*/
/dts-v1/;
+#include "vexpress-v2m-rs1.dtsi"
/ {
model = "V2P-CA15_CA7";
@@ -203,7 +204,7 @@
<1 10 0xf08>;
};
- pmu_a15 {
+ pmu-a15 {
compatible = "arm,cortex-a15-pmu";
interrupts = <0 68 4>,
<0 69 4>;
@@ -211,7 +212,7 @@
<&cpu1>;
};
- pmu_a7 {
+ pmu-a7 {
compatible = "arm,cortex-a7-pmu";
interrupts = <0 128 4>,
<0 129 4>,
@@ -584,7 +585,7 @@
};
};
- smb@8000000 {
+ smb: smb@8000000 {
compatible = "simple-bus";
#address-cells = <2>;
@@ -641,8 +642,6 @@
<0 0 40 &gic 0 40 4>,
<0 0 41 &gic 0 41 4>,
<0 0 42 &gic 0 42 4>;
-
- /include/ "vexpress-v2m-rs1.dtsi"
};
site2: hsb@40000000 {
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca5s.dts b/arch/arm/boot/dts/vexpress-v2p-ca5s.dts
index 32f1906ffecf..e5b4a7570a01 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca5s.dts
+++ b/arch/arm/boot/dts/vexpress-v2p-ca5s.dts
@@ -9,6 +9,7 @@
*/
/dts-v1/;
+#include "vexpress-v2m-rs1.dtsi"
/ {
model = "V2P-CA5s";
@@ -191,7 +192,7 @@
};
};
- smb@8000000 {
+ smb: smb@8000000 {
compatible = "simple-bus";
#address-cells = <2>;
@@ -248,8 +249,6 @@
<0 0 40 &gic 0 40 4>,
<0 0 41 &gic 0 41 4>,
<0 0 42 &gic 0 42 4>;
-
- /include/ "vexpress-v2m-rs1.dtsi"
};
site2: hsb@40000000 {
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca9.dts b/arch/arm/boot/dts/vexpress-v2p-ca9.dts
index 5814460e0549..fc43873cbdff 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca9.dts
+++ b/arch/arm/boot/dts/vexpress-v2p-ca9.dts
@@ -9,6 +9,7 @@
*/
/dts-v1/;
+#include "vexpress-v2m.dtsi"
/ {
model = "V2P-CA9";
@@ -301,7 +302,7 @@
};
};
- smb@4000000 {
+ smb: smb@4000000 {
compatible = "simple-bus";
#address-cells = <2>;
@@ -357,8 +358,6 @@
<0 0 40 &gic 0 40 4>,
<0 0 41 &gic 0 41 4>,
<0 0 42 &gic 0 42 4>;
-
- /include/ "vexpress-v2m.dtsi"
};
site2: hsb@e0000000 {
diff --git a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi
index d8b2972527eb..e2da122a63f4 100644
--- a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi
+++ b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi
@@ -117,7 +117,7 @@
clocks = <&clk16m>;
spi-max-frequency = <10000000>;
interrupt-parent = <&gpio1>;
- interrupts = <11 GPIO_ACTIVE_LOW>;
+ interrupts = <11 IRQ_TYPE_EDGE_RISING>;
};
};
diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts
index 782b69a3acdf..bd79e00bf615 100644
--- a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts
+++ b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts
@@ -70,8 +70,6 @@
compatible = "marvell,mv88e6085";
pinctrl-0 = <&pinctrl_gpio_switch0>;
pinctrl-names = "default";
- #address-cells = <1>;
- #size-cells = <0>;
reg = <0>;
dsa,member = <0 0>;
interrupt-parent = <&gpio0>;
@@ -156,8 +154,6 @@
compatible = "marvell,mv88e6085";
pinctrl-0 = <&pinctrl_gpio_switch1>;
pinctrl-names = "default";
- #address-cells = <1>;
- #size-cells = <0>;
reg = <0>;
dsa,member = <0 1>;
interrupt-parent = <&gpio0>;
@@ -243,8 +239,6 @@
switch2: switch@0 {
compatible = "marvell,mv88e6085";
- #address-cells = <1>;
- #size-cells = <0>;
reg = <0>;
dsa,member = <0 2>;
diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts b/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts
index c6f134c78303..0b1e94c6f25b 100644
--- a/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts
+++ b/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts
@@ -69,8 +69,6 @@
compatible = "marvell,mv88e6190";
pinctrl-0 = <&pinctrl_gpio_switch0>;
pinctrl-names = "default";
- #address-cells = <1>;
- #size-cells = <0>;
reg = <0>;
dsa,member = <0 0>;
eeprom-length = <65536>;
@@ -166,8 +164,6 @@
compatible = "marvell,mv88e6190";
pinctrl-0 = <&pinctrl_gpio_switch1>;
pinctrl-names = "default";
- #address-cells = <1>;
- #size-cells = <0>;
reg = <0>;
dsa,member = <0 1>;
eeprom-length = <65536>;
diff --git a/arch/arm/boot/dts/vf610-zii-dev.dtsi b/arch/arm/boot/dts/vf610-zii-dev.dtsi
index 4890b8a5aa44..5ae5abfe1d55 100644
--- a/arch/arm/boot/dts/vf610-zii-dev.dtsi
+++ b/arch/arm/boot/dts/vf610-zii-dev.dtsi
@@ -222,6 +222,10 @@
status = "okay";
};
+&tempsensor {
+ io-channels = <&adc0 16>;
+};
+
&iomuxc {
pinctrl_adc0_ad5: adc0ad5grp {
fsl,pins = <
diff --git a/arch/arm/boot/dts/vfxxx.dtsi b/arch/arm/boot/dts/vfxxx.dtsi
index c3f09b737924..d392794d9c13 100644
--- a/arch/arm/boot/dts/vfxxx.dtsi
+++ b/arch/arm/boot/dts/vfxxx.dtsi
@@ -84,7 +84,7 @@
mask = <0x1000>;
};
- iio-hwmon {
+ tempsensor: iio-hwmon {
compatible = "iio-hwmon";
io-channels = <&adc0 16>, <&adc1 16>;
};
diff --git a/arch/arm/mach-meson/Kconfig b/arch/arm/mach-meson/Kconfig
index d90f61e6254f..d51cfda953d4 100644
--- a/arch/arm/mach-meson/Kconfig
+++ b/arch/arm/mach-meson/Kconfig
@@ -19,14 +19,7 @@ config MACH_MESON6
select MESON6_TIMER
config MACH_MESON8
- bool "Amlogic Meson8 SoCs support"
- default ARCH_MESON
- select MESON6_TIMER
- select COMMON_CLK_MESON8B
- select MESON_IRQ_GPIO
-
-config MACH_MESON8B
- bool "Amlogic Meson8b SoCs support"
+ bool "Amlogic Meson8, Meson8b and Meson8m2 SoCs support"
default ARCH_MESON
select MESON6_TIMER
select COMMON_CLK_MESON8B
diff --git a/arch/arm/mach-meson/meson.c b/arch/arm/mach-meson/meson.c
index 4e2357178625..c8d99df32f9b 100644
--- a/arch/arm/mach-meson/meson.c
+++ b/arch/arm/mach-meson/meson.c
@@ -20,6 +20,7 @@ static const char * const meson_common_board_compat[] = {
"amlogic,meson6",
"amlogic,meson8",
"amlogic,meson8b",
+ "amlogic,meson8m2",
NULL,
};
diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile
index 4aa50b9b26bc..3543bc324553 100644
--- a/arch/arm64/boot/dts/Makefile
+++ b/arch/arm64/boot/dts/Makefile
@@ -22,5 +22,6 @@ subdir-y += renesas
subdir-y += rockchip
subdir-y += socionext
subdir-y += sprd
+subdir-y += synaptics
subdir-y += xilinx
subdir-y += zte
diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile
index 8bebe7da5ed9..c31f90a49481 100644
--- a/arch/arm64/boot/dts/allwinner/Makefile
+++ b/arch/arm64/boot/dts/allwinner/Makefile
@@ -6,10 +6,11 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-orangepi-win.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pine64-plus.dtb sun50i-a64-pine64.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-sopine-baseboard.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-teres-i.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-libretech-all-h3-cc.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo2.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo-plus2.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-pc2.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-prime.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-zero-plus.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-zero-plus2.dtb
-dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo2.dtb
-dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo-plus2.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64.dtb
diff --git a/arch/arm64/boot/dts/allwinner/axp803.dtsi b/arch/arm64/boot/dts/allwinner/axp803.dtsi
index ff8af52743ff..e5eae8bafc42 100644
--- a/arch/arm64/boot/dts/allwinner/axp803.dtsi
+++ b/arch/arm64/boot/dts/allwinner/axp803.dtsi
@@ -146,5 +146,10 @@
regulator-max-microvolt = <3000000>;
regulator-name = "rtc-ldo";
};
+
+ reg_drivevbus: drivevbus {
+ regulator-name = "drivevbus";
+ status = "disabled";
+ };
};
};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
index 2250dec9974c..0716b1441187 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
@@ -86,6 +86,10 @@
};
};
+&ehci0 {
+ status = "okay";
+};
+
&ehci1 {
status = "okay";
};
@@ -155,6 +159,10 @@
status = "okay";
};
+&ohci0 {
+ status = "okay";
+};
+
&ohci1 {
status = "okay";
};
@@ -167,6 +175,7 @@
reg = <0x3a3>;
interrupt-parent = <&r_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ x-powers,drive-vbus-en; /* set N_VBUSEN as output pin */
};
};
@@ -254,6 +263,11 @@
regulator-name = "vcc-wifi-io";
};
+&reg_drivevbus {
+ regulator-name = "usb0-vbus";
+ status = "okay";
+};
+
&reg_eldo1 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
@@ -294,6 +308,13 @@
status = "okay";
};
+&usb_otg {
+ dr_mode = "otg";
+ status = "okay";
+};
+
&usbphy {
+ usb0_id_det-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
+ usb0_vbus-supply = <&reg_drivevbus>;
status = "okay";
};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h3-cc.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h3-cc.dts
new file mode 100644
index 000000000000..95e113ce8699
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h3-cc.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2018 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+/dts-v1/;
+#include "sun50i-h5.dtsi"
+#include <arm/sunxi-libretech-all-h3-cc.dtsi>
+
+/ {
+ model = "Libre Computer Board ALL-H3-CC H5";
+ compatible = "libretech,all-h3-cc-h5", "allwinner,sun50i-h5";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
index e237c05cfdb4..62d646baac3c 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
@@ -47,7 +47,7 @@
#address-cells = <1>;
#size-cells = <0>;
- cpu@0 {
+ cpu0: cpu@0 {
compatible = "arm,cortex-a53", "arm,armv8";
device_type = "cpu";
reg = <0>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
index d36de5eb81f3..b6f2d6b2ecae 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
@@ -22,6 +22,16 @@
};
};
+&r_i2c {
+ status = "okay";
+
+ pcf8563: rtc@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ #clock-cells = <0>;
+ };
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_ph_pins>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
index 56563150d61a..c72da8cd9ef5 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
@@ -4,6 +4,8 @@
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/sun50i-h6-ccu.h>
+#include <dt-bindings/reset/sun50i-h6-ccu.h>
/ {
interrupt-parent = <&gic>;
@@ -115,7 +117,7 @@
<GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu 26>, <&osc24M>, <&osc32k>;
+ clocks = <&ccu CLK_APB1>, <&osc24M>, <&osc32k>;
clock-names = "apb", "hosc", "losc";
gpio-controller;
#gpio-cells = <3>;
@@ -134,8 +136,8 @@
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&ccu 70>;
- resets = <&ccu 21>;
+ clocks = <&ccu CLK_BUS_UART0>;
+ resets = <&ccu RST_BUS_UART0>;
status = "disabled";
};
@@ -145,8 +147,8 @@
interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&ccu 71>;
- resets = <&ccu 22>;
+ clocks = <&ccu CLK_BUS_UART1>;
+ resets = <&ccu RST_BUS_UART1>;
status = "disabled";
};
@@ -156,8 +158,8 @@
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&ccu 72>;
- resets = <&ccu 23>;
+ clocks = <&ccu CLK_BUS_UART2>;
+ resets = <&ccu RST_BUS_UART2>;
status = "disabled";
};
@@ -167,9 +169,59 @@
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&ccu 73>;
- resets = <&ccu 24>;
+ clocks = <&ccu CLK_BUS_UART3>;
+ resets = <&ccu RST_BUS_UART3>;
status = "disabled";
};
+
+ r_ccu: clock@7010000 {
+ compatible = "allwinner,sun50i-h6-r-ccu";
+ reg = <0x07010000 0x400>;
+ clocks = <&osc24M>, <&osc32k>, <&iosc>,
+ <&ccu CLK_PLL_PERIPH0>;
+ clock-names = "hosc", "losc", "iosc", "pll-periph";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ r_intc: interrupt-controller@7021000 {
+ compatible = "allwinner,sun50i-h6-r-intc",
+ "allwinner,sun6i-a31-r-intc";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x07021000 0x400>;
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ r_pio: pinctrl@7022000 {
+ compatible = "allwinner,sun50i-h6-r-pinctrl";
+ reg = <0x07022000 0x400>;
+ interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&r_ccu 2>, <&osc24M>, <&osc32k>;
+ clock-names = "apb", "hosc", "losc";
+ gpio-controller;
+ #gpio-cells = <3>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+
+ r_i2c_pins: r-i2c {
+ pins = "PL0", "PL1";
+ function = "s_i2c";
+ };
+ };
+
+ r_i2c: i2c@7081400 {
+ compatible = "allwinner,sun6i-a31-i2c";
+ reg = <0x07081400 0x400>;
+ interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&r_ccu 8>;
+ resets = <&r_ccu 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&r_i2c_pins>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
};
};
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
index 57eedced5a51..4b3331fbfe39 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
@@ -15,6 +15,53 @@
serial0 = &uart_AO;
serial1 = &uart_A;
};
+
+ vddio_boot: regulator-vddio_boot {
+ compatible = "regulator-fixed";
+ regulator-name = "VDDIO_BOOT";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vddao_3v3: regulator-vddao_3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDDAO_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ vddio_ao18: regulator-vddio_ao18 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDDIO_AO18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vcc_3v3: regulator-vcc_3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ emmc_pwrseq: emmc-pwrseq {
+ compatible = "mmc-pwrseq-emmc";
+ reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+ };
+
+ sdio_pwrseq: sdio-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&gpio GPIOX_7 GPIO_ACTIVE_LOW>;
+ clocks = <&wifi32k>;
+ clock-names = "ext_clock";
+ };
+
+ wifi32k: wifi32k {
+ compatible = "pwm-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ pwms = <&pwm_ab 0 30518 0>; /* PWM_A at 32.768KHz */
+ };
};
&ethmac {
@@ -47,3 +94,62 @@
pinctrl-0 = <&i2c1_z_pins>;
pinctrl-names = "default";
};
+
+&i2c_AO {
+ status = "okay";
+ pinctrl-0 = <&i2c_ao_sck_10_pins>, <&i2c_ao_sda_11_pins>;
+ pinctrl-names = "default";
+};
+
+&pwm_ab {
+ status = "okay";
+ pinctrl-0 = <&pwm_a_x20_pins>;
+ pinctrl-names = "default";
+};
+
+/* emmc storage */
+&sd_emmc_c {
+ status = "okay";
+ pinctrl-0 = <&emmc_pins>;
+ pinctrl-1 = <&emmc_clk_gate_pins>;
+ pinctrl-names = "default", "clk-gate";
+
+ bus-width = <8>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ max-frequency = <180000000>;
+ non-removable;
+ disable-wp;
+ mmc-ddr-1_8v;
+ mmc-hs200-1_8v;
+
+ vmmc-supply = <&vcc_3v3>;
+ vqmmc-supply = <&vddio_boot>;
+};
+
+/* wifi module */
+&sd_emmc_b {
+ status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pinctrl-0 = <&sdio_pins>;
+ pinctrl-1 = <&sdio_clk_gate_pins>;
+ pinctrl-names = "default", "clk-gate";
+
+ bus-width = <4>;
+ cap-sd-highspeed;
+ max-frequency = <100000000>;
+ non-removable;
+ disable-wp;
+
+ mmc-pwrseq = <&sdio_pwrseq>;
+
+ vmmc-supply = <&vddao_3v3>;
+ vqmmc-supply = <&vddio_boot>;
+
+ brcmf: wifi@1 {
+ reg = <1>;
+ compatible = "brcm,bcm4329-fmac";
+ };
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index b58808eb3cc8..fee87737a201 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -7,6 +7,9 @@
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/axg-clkc.h>
+#include <dt-bindings/clock/axg-aoclkc.h>
+#include <dt-bindings/gpio/meson-axg-gpio.h>
+#include <dt-bindings/reset/amlogic,meson-axg-reset.h>
/ {
compatible = "amlogic,meson-axg";
@@ -107,12 +110,51 @@
#clock-cells = <0>;
};
+ ao_alt_xtal: ao_alt_xtal-clk {
+ compatible = "fixed-clock";
+ clock-frequency = <32000000>;
+ clock-output-names = "ao_alt_xtal";
+ #clock-cells = <0>;
+ };
+
soc {
compatible = "simple-bus";
#address-cells = <2>;
#size-cells = <2>;
ranges;
+ apb: apb@ffe00000 {
+ compatible = "simple-bus";
+ reg = <0x0 0xffe00000 0x0 0x200000>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x0 0x0 0xffe00000 0x0 0x200000>;
+
+ sd_emmc_b: sd@5000 {
+ compatible = "amlogic,meson-axg-mmc";
+ reg = <0x0 0x5000 0x0 0x2000>;
+ interrupts = <GIC_SPI 217 IRQ_TYPE_EDGE_RISING>;
+ status = "disabled";
+ clocks = <&clkc CLKID_SD_EMMC_B>,
+ <&clkc CLKID_SD_EMMC_B_CLK0>,
+ <&clkc CLKID_FCLK_DIV2>;
+ clock-names = "core", "clkin0", "clkin1";
+ resets = <&reset RESET_SD_EMMC_B>;
+ };
+
+ sd_emmc_c: mmc@7000 {
+ compatible = "amlogic,meson-axg-mmc";
+ reg = <0x0 0x7000 0x0 0x2000>;
+ interrupts = <GIC_SPI 218 IRQ_TYPE_EDGE_RISING>;
+ status = "disabled";
+ clocks = <&clkc CLKID_SD_EMMC_C>,
+ <&clkc CLKID_SD_EMMC_C_CLK0>,
+ <&clkc CLKID_FCLK_DIV2>;
+ clock-names = "core", "clkin0", "clkin1";
+ resets = <&reset RESET_SD_EMMC_C>;
+ };
+ };
+
cbus: bus@ffd00000 {
compatible = "simple-bus";
reg = <0x0 0xffd00000 0x0 0x25000>;
@@ -120,6 +162,15 @@
#size-cells = <2>;
ranges = <0x0 0x0 0x0 0xffd00000 0x0 0x25000>;
+ gpio_intc: interrupt-controller@f080 {
+ compatible = "amlogic,meson-gpio-intc";
+ reg = <0x0 0xf080 0x0 0x10>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>;
+ status = "disabled";
+ };
+
pwm_ab: pwm@1b000 {
compatible = "amlogic,meson-axg-ee-pwm";
reg = <0x0 0x1b000 0x0 0x20>;
@@ -164,50 +215,42 @@
i2c0: i2c@1f000 {
compatible = "amlogic,meson-axg-i2c";
- status = "disabled";
reg = <0x0 0x1f000 0x0 0x20>;
- interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 47 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&clkc CLKID_I2C>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&clkc CLKID_I2C>;
- clock-names = "clk_i2c";
+ status = "disabled";
};
i2c1: i2c@1e000 {
compatible = "amlogic,meson-axg-i2c";
+ reg = <0x0 0x1e000 0x0 0x20>;
+ interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&clkc CLKID_I2C>;
#address-cells = <1>;
#size-cells = <0>;
- reg = <0x0 0x1e000 0x0 0x20>;
status = "disabled";
- interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 48 IRQ_TYPE_EDGE_RISING>;
- clocks = <&clkc CLKID_I2C>;
- clock-names = "clk_i2c";
};
i2c2: i2c@1d000 {
compatible = "amlogic,meson-axg-i2c";
- status = "disabled";
reg = <0x0 0x1d000 0x0 0x20>;
- interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 49 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&clkc CLKID_I2C>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&clkc CLKID_I2C>;
- clock-names = "clk_i2c";
+ status = "disabled";
};
i2c3: i2c@1c000 {
compatible = "amlogic,meson-axg-i2c";
- status = "disabled";
reg = <0x0 0x1c000 0x0 0x20>;
- interrupts = <GIC_SPI 39 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <GIC_SPI 39 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&clkc CLKID_I2C>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&clkc CLKID_I2C>;
- clock-names = "clk_i2c";
+ status = "disabled";
};
uart_A: serial@24000 {
@@ -262,10 +305,14 @@
#size-cells = <2>;
ranges = <0x0 0x0 0x0 0xff63c000 0x0 0x1c00>;
- clkc: clock-controller@0 {
- compatible = "amlogic,axg-clkc";
- #clock-cells = <1>;
- reg = <0x0 0x0 0x0 0x320>;
+ sysctrl: system-controller@0 {
+ compatible = "amlogic,meson-axg-hhi-sysctrl", "syscon", "simple-mfd";
+ reg = <0 0 0 0x400>;
+
+ clkc: clock-controller {
+ compatible = "amlogic,axg-clkc";
+ #clock-cells = <1>;
+ };
};
};
@@ -309,6 +356,57 @@
gpio-ranges = <&pinctrl_periphs 0 0 86>;
};
+ emmc_pins: emmc {
+ mux {
+ groups = "emmc_nand_d0",
+ "emmc_nand_d1",
+ "emmc_nand_d2",
+ "emmc_nand_d3",
+ "emmc_nand_d4",
+ "emmc_nand_d5",
+ "emmc_nand_d6",
+ "emmc_nand_d7",
+ "emmc_clk",
+ "emmc_cmd",
+ "emmc_ds";
+ function = "emmc";
+ };
+ };
+
+ emmc_clk_gate_pins: emmc_clk_gate {
+ mux {
+ groups = "BOOT_8";
+ function = "gpio_periphs";
+ };
+ cfg-pull-down {
+ pins = "BOOT_8";
+ bias-pull-down;
+ };
+ };
+
+ sdio_pins: sdio {
+ mux {
+ groups = "sdio_d0",
+ "sdio_d1",
+ "sdio_d2",
+ "sdio_d3",
+ "sdio_cmd",
+ "sdio_clk";
+ function = "sdio";
+ };
+ };
+
+ sdio_clk_gate_pins: sdio_clk_gate {
+ mux {
+ groups = "GPIOX_4";
+ function = "gpio_periphs";
+ };
+ cfg-pull-down {
+ pins = "GPIOX_4";
+ bias-pull-down;
+ };
+ };
+
eth_rmii_x_pins: eth-x-rmii {
mux {
groups = "eth_mdio_x",
@@ -660,6 +758,251 @@
function = "uart_ao_b_z";
};
};
+
+ mclk_b_pins: mclk_b {
+ mux {
+ groups = "mclk_b";
+ function = "mclk_b";
+ };
+ };
+
+ mclk_c_pins: mclk_c {
+ mux {
+ groups = "mclk_c";
+ function = "mclk_c";
+ };
+ };
+
+ tdma_sclk_pins: tdma_sclk {
+ mux {
+ groups = "tdma_sclk";
+ function = "tdma";
+ };
+ };
+
+ tdma_sclk_slv_pins: tdma_sclk_slv {
+ mux {
+ groups = "tdma_sclk_slv";
+ function = "tdma";
+ };
+ };
+
+ tdma_fs_pins: tdma_fs {
+ mux {
+ groups = "tdma_fs";
+ function = "tdma";
+ };
+ };
+
+ tdma_fs_slv_pins: tdma_fs_slv {
+ mux {
+ groups = "tdma_fs_slv";
+ function = "tdma";
+ };
+ };
+
+ tdma_din0_pins: tdma_din0 {
+ mux {
+ groups = "tdma_din0";
+ function = "tdma";
+ };
+ };
+
+ tdma_dout0_x14_pins: tdma_dout0_x14 {
+ mux {
+ groups = "tdma_dout0_x14";
+ function = "tdma";
+ };
+ };
+
+ tdma_dout0_x15_pins: tdma_dout0_x15 {
+ mux {
+ groups = "tdma_dout0_x15";
+ function = "tdma";
+ };
+ };
+
+ tdma_dout1_pins: tdma_dout1 {
+ mux {
+ groups = "tdma_dout1";
+ function = "tdma";
+ };
+ };
+
+ tdma_din1_pins: tdma_din1 {
+ mux {
+ groups = "tdma_din1";
+ function = "tdma";
+ };
+ };
+
+ tdmb_sclk_pins: tdmb_sclk {
+ mux {
+ groups = "tdmb_sclk";
+ function = "tdmb";
+ };
+ };
+
+ tdmb_sclk_slv_pins: tdmb_sclk_slv {
+ mux {
+ groups = "tdmb_sclk_slv";
+ function = "tdmb";
+ };
+ };
+
+ tdmb_fs_pins: tdmb_fs {
+ mux {
+ groups = "tdmb_fs";
+ function = "tdmb";
+ };
+ };
+
+ tdmb_fs_slv_pins: tdmb_fs_slv {
+ mux {
+ groups = "tdmb_fs_slv";
+ function = "tdmb";
+ };
+ };
+
+ tdmb_din0_pins: tdmb_din0 {
+ mux {
+ groups = "tdmb_din0";
+ function = "tdmb";
+ };
+ };
+
+ tdmb_dout0_pins: tdmb_dout0 {
+ mux {
+ groups = "tdmb_dout0";
+ function = "tdmb";
+ };
+ };
+
+ tdmb_din1_pins: tdmb_din1 {
+ mux {
+ groups = "tdmb_din1";
+ function = "tdmb";
+ };
+ };
+
+ tdmb_dout1_pins: tdmb_dout1 {
+ mux {
+ groups = "tdmb_dout1";
+ function = "tdmb";
+ };
+ };
+
+ tdmb_din2_pins: tdmb_din2 {
+ mux {
+ groups = "tdmb_din2";
+ function = "tdmb";
+ };
+ };
+
+ tdmb_dout2_pins: tdmb_dout2 {
+ mux {
+ groups = "tdmb_dout2";
+ function = "tdmb";
+ };
+ };
+
+ tdmb_din3_pins: tdmb_din3 {
+ mux {
+ groups = "tdmb_din3";
+ function = "tdmb";
+ };
+ };
+
+ tdmb_dout3_pins: tdmb_dout3 {
+ mux {
+ groups = "tdmb_dout3";
+ function = "tdmb";
+ };
+ };
+
+ tdmc_sclk_pins: tdmc_sclk {
+ mux {
+ groups = "tdmc_sclk";
+ function = "tdmc";
+ };
+ };
+
+ tdmc_sclk_slv_pins: tdmc_sclk_slv {
+ mux {
+ groups = "tdmc_sclk_slv";
+ function = "tdmc";
+ };
+ };
+
+ tdmc_fs_pins: tdmc_fs {
+ mux {
+ groups = "tdmc_fs";
+ function = "tdmc";
+ };
+ };
+
+ tdmc_fs_slv_pins: tdmc_fs_slv {
+ mux {
+ groups = "tdmc_fs_slv";
+ function = "tdmc";
+ };
+ };
+
+ tdmc_din0_pins: tdmc_din0 {
+ mux {
+ groups = "tdmc_din0";
+ function = "tdmc";
+ };
+ };
+
+ tdmc_dout0_pins: tdmc_dout0 {
+ mux {
+ groups = "tdmc_dout0";
+ function = "tdmc";
+ };
+ };
+
+ tdmc_din1_pins: tdmc_din1 {
+ mux {
+ groups = "tdmc_din1";
+ function = "tdmc";
+ };
+ };
+
+ tdmc_dout1_pins: tdmc_dout1 {
+ mux {
+ groups = "tdmc_dout1";
+ function = "tdmc";
+ };
+ };
+
+ tdmc_din2_pins: tdmc_din2 {
+ mux {
+ groups = "tdmc_din2";
+ function = "tdmc";
+ };
+ };
+
+ tdmc_dout2_pins: tdmc_dout2 {
+ mux {
+ groups = "tdmc_dout2";
+ function = "tdmc";
+ };
+ };
+
+ tdmc_din3_pins: tdmc_din3 {
+ mux {
+ groups = "tdmc_din3";
+ function = "tdmc";
+ };
+ };
+
+ tdmc_dout3_pins: tdmc_dout3 {
+ mux {
+ groups = "tdmc_dout3";
+ function = "tdmc";
+ };
+ };
};
};
@@ -688,6 +1031,17 @@
#size-cells = <2>;
ranges = <0x0 0x0 0x0 0xff800000 0x0 0x100000>;
+ sysctrl_AO: sys-ctrl@0 {
+ compatible = "amlogic,meson-axg-ao-sysctrl", "syscon", "simple-mfd";
+ reg = <0x0 0x0 0x0 0x100>;
+
+ clkc_AO: clock-controller {
+ compatible = "amlogic,meson-axg-aoclkc";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+ };
+
pinctrl_aobus: pinctrl@14 {
compatible = "amlogic,meson-axg-aobus-pinctrl";
#address-cells = <2>;
@@ -704,6 +1058,48 @@
gpio-ranges = <&pinctrl_aobus 0 0 15>;
};
+ i2c_ao_sck_4_pins: i2c_ao_sck_4 {
+ mux {
+ groups = "i2c_ao_sck_4";
+ function = "i2c_ao";
+ };
+ };
+
+ i2c_ao_sck_8_pins: i2c_ao_sck_8 {
+ mux {
+ groups = "i2c_ao_sck_8";
+ function = "i2c_ao";
+ };
+ };
+
+ i2c_ao_sck_10_pins: i2c_ao_sck_10 {
+ mux {
+ groups = "i2c_ao_sck_10";
+ function = "i2c_ao";
+ };
+ };
+
+ i2c_ao_sda_5_pins: i2c_ao_sda_5 {
+ mux {
+ groups = "i2c_ao_sda_5";
+ function = "i2c_ao";
+ };
+ };
+
+ i2c_ao_sda_9_pins: i2c_ao_sda_9 {
+ mux {
+ groups = "i2c_ao_sda_9";
+ function = "i2c_ao";
+ };
+ };
+
+ i2c_ao_sda_11_pins: i2c_ao_sda_11 {
+ mux {
+ groups = "i2c_ao_sda_11";
+ function = "i2c_ao";
+ };
+ };
+
remote_input_ao_pins: remote_input_ao {
mux {
groups = "remote_input_ao";
@@ -766,20 +1162,19 @@
i2c_AO: i2c@5000 {
compatible = "amlogic,meson-axg-i2c";
- status = "disabled";
reg = <0x0 0x05000 0x0 0x20>;
interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&clkc CLKID_AO_I2C>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&clkc CLKID_I2C>;
- clock-names = "clk_i2c";
+ status = "disabled";
};
uart_AO: serial@3000 {
compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart";
reg = <0x0 0x3000 0x0 0x18>;
interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>;
- clocks = <&xtal>, <&clkc CLKID_CLK81>, <&xtal>;
+ clocks = <&xtal>, <&clkc_AO CLKID_AO_UART1>, <&xtal>;
clock-names = "xtal", "pclk", "baud";
status = "disabled";
};
@@ -788,7 +1183,7 @@
compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart";
reg = <0x0 0x4000 0x0 0x18>;
interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>;
- clocks = <&xtal>, <&clkc CLKID_CLK81>, <&xtal>;
+ clocks = <&xtal>, <&clkc_AO CLKID_AO_UART2>, <&xtal>;
clock-names = "xtal", "pclk", "baud";
status = "disabled";
};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
index 562c26a0ba33..98cbba6809ca 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
@@ -307,11 +307,10 @@
clock-names = "isfr", "iahb", "venci";
};
-&hiubus {
- clkc: clock-controller@0 {
+&sysctrl {
+ clkc: clock-controller {
compatible = "amlogic,gxbb-clkc";
#clock-cells = <1>;
- reg = <0x0 0x0 0x0 0x3db>;
};
};
@@ -716,6 +715,7 @@
<&clkc CLKID_SD_EMMC_A_CLK0>,
<&clkc CLKID_FCLK_DIV2>;
clock-names = "core", "clkin0", "clkin1";
+ resets = <&reset RESET_SD_EMMC_A>;
};
&sd_emmc_b {
@@ -723,6 +723,7 @@
<&clkc CLKID_SD_EMMC_B_CLK0>,
<&clkc CLKID_FCLK_DIV2>;
clock-names = "core", "clkin0", "clkin1";
+ resets = <&reset RESET_SD_EMMC_B>;
};
&sd_emmc_c {
@@ -730,6 +731,7 @@
<&clkc CLKID_SD_EMMC_C_CLK0>,
<&clkc CLKID_FCLK_DIV2>;
clock-names = "core", "clkin0", "clkin1";
+ resets = <&reset RESET_SD_EMMC_C>;
};
&spicc {
@@ -749,12 +751,12 @@
};
&uart_AO {
- clocks = <&xtal>, <&clkc CLKID_CLK81>, <&xtal>;
+ clocks = <&xtal>, <&clkc_AO CLKID_AO_UART1>, <&xtal>;
clock-names = "xtal", "pclk", "baud";
};
&uart_AO_B {
- clocks = <&xtal>, <&clkc CLKID_CLK81>, <&xtal>;
+ clocks = <&xtal>, <&clkc_AO CLKID_AO_UART2>, <&xtal>;
clock-names = "xtal", "pclk", "baud";
};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
index dba365ed4bd5..27538eea547b 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
@@ -267,11 +267,10 @@
clock-names = "isfr", "iahb", "venci";
};
-&hiubus {
- clkc: clock-controller@0 {
- compatible = "amlogic,gxl-clkc", "amlogic,gxbb-clkc";
+&sysctrl {
+ clkc: clock-controller {
+ compatible = "amlogic,gxl-clkc";
#clock-cells = <1>;
- reg = <0x0 0x0 0x0 0x3db>;
};
};
@@ -725,13 +724,15 @@
<&clkc CLKID_SD_EMMC_A_CLK0>,
<&clkc CLKID_FCLK_DIV2>;
clock-names = "core", "clkin0", "clkin1";
+ resets = <&reset RESET_SD_EMMC_A>;
};
&sd_emmc_b {
clocks = <&clkc CLKID_SD_EMMC_B>,
<&clkc CLKID_SD_EMMC_B_CLK0>,
<&clkc CLKID_FCLK_DIV2>;
- clock-names = "core", "clkin0", "clkin1";
+ clock-names = "core", "clkin0", "clkin1";
+ resets = <&reset RESET_SD_EMMC_B>;
};
&sd_emmc_c {
@@ -739,6 +740,7 @@
<&clkc CLKID_SD_EMMC_C_CLK0>,
<&clkc CLKID_FCLK_DIV2>;
clock-names = "core", "clkin0", "clkin1";
+ resets = <&reset RESET_SD_EMMC_C>;
};
&spicc {
@@ -758,12 +760,12 @@
};
&uart_AO {
- clocks = <&xtal>, <&clkc CLKID_CLK81>, <&xtal>;
+ clocks = <&xtal>, <&clkc_AO CLKID_AO_UART1>, <&xtal>;
clock-names = "xtal", "pclk", "baud";
};
&uart_AO_B {
- clocks = <&xtal>, <&clkc CLKID_CLK81>, <&xtal>;
+ clocks = <&xtal>, <&clkc_AO CLKID_AO_UART2>, <&xtal>;
clock-names = "xtal", "pclk", "baud";
};
diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi
index eb749c50a736..ce56a4acda4f 100644
--- a/arch/arm64/boot/dts/arm/juno-base.dtsi
+++ b/arch/arm64/boot/dts/arm/juno-base.dtsi
@@ -1,5 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
#include "juno-clocks.dtsi"
+#include "juno-motherboard.dtsi"
/ {
/*
@@ -572,14 +573,14 @@
thermal-sensors = <&scpi_sensors0 3>;
};
- big_cluster_thermal_zone: big_cluster {
+ big_cluster_thermal_zone: big-cluster {
polling-delay = <1000>;
polling-delay-passive = <100>;
thermal-sensors = <&scpi_sensors0 21>;
status = "disabled";
};
- little_cluster_thermal_zone: little_cluster {
+ little_cluster_thermal_zone: little-cluster {
polling-delay = <1000>;
polling-delay-passive = <100>;
thermal-sensors = <&scpi_sensors0 22>;
@@ -677,7 +678,7 @@
clock-names = "pxlclk";
port {
- hdlcd1_output: hdlcd1-endpoint {
+ hdlcd1_output: endpoint {
remote-endpoint = <&tda998x_1_input>;
};
};
@@ -692,7 +693,7 @@
clock-names = "pxlclk";
port {
- hdlcd0_output: hdlcd0-endpoint {
+ hdlcd0_output: endpoint {
remote-endpoint = <&tda998x_0_input>;
};
};
@@ -720,7 +721,7 @@
compatible = "nxp,tda998x";
reg = <0x70>;
port {
- tda998x_0_input: tda998x-0-endpoint {
+ tda998x_0_input: endpoint {
remote-endpoint = <&hdlcd0_output>;
};
};
@@ -730,7 +731,7 @@
compatible = "nxp,tda998x";
reg = <0x71>;
port {
- tda998x_1_input: tda998x-1-endpoint {
+ tda998x_1_input: endpoint {
remote-endpoint = <&hdlcd1_output>;
};
};
@@ -795,8 +796,6 @@
<0 0 10 &gic 0 0 0 167 IRQ_TYPE_LEVEL_HIGH>,
<0 0 11 &gic 0 0 0 168 IRQ_TYPE_LEVEL_HIGH>,
<0 0 12 &gic 0 0 0 169 IRQ_TYPE_LEVEL_HIGH>;
-
- /include/ "juno-motherboard.dtsi"
};
site2: tlx@60000000 {
diff --git a/arch/arm64/boot/dts/arm/juno-motherboard.dtsi b/arch/arm64/boot/dts/arm/juno-motherboard.dtsi
index 69804c5f1197..1792b074e9a3 100644
--- a/arch/arm64/boot/dts/arm/juno-motherboard.dtsi
+++ b/arch/arm64/boot/dts/arm/juno-motherboard.dtsi
@@ -7,6 +7,8 @@
*
*/
+/ {
+ smb@8000000 {
mb_clk24mhz: clk24mhz {
compatible = "fixed-clock";
#clock-cells = <0>;
@@ -54,46 +56,46 @@
regulator-always-on;
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
power-button {
- debounce_interval = <50>;
+ debounce-interval = <50>;
wakeup-source;
linux,code = <116>;
label = "POWER";
gpios = <&iofpga_gpio0 0 0x4>;
};
home-button {
- debounce_interval = <50>;
+ debounce-interval = <50>;
wakeup-source;
linux,code = <102>;
label = "HOME";
gpios = <&iofpga_gpio0 1 0x4>;
};
rlock-button {
- debounce_interval = <50>;
+ debounce-interval = <50>;
wakeup-source;
linux,code = <152>;
label = "RLOCK";
gpios = <&iofpga_gpio0 2 0x4>;
};
vol-up-button {
- debounce_interval = <50>;
+ debounce-interval = <50>;
wakeup-source;
linux,code = <115>;
label = "VOL+";
gpios = <&iofpga_gpio0 3 0x4>;
};
vol-down-button {
- debounce_interval = <50>;
+ debounce-interval = <50>;
wakeup-source;
linux,code = <114>;
label = "VOL-";
gpios = <&iofpga_gpio0 4 0x4>;
};
nmi-button {
- debounce_interval = <50>;
+ debounce-interval = <50>;
wakeup-source;
linux,code = <99>;
label = "NMI";
@@ -287,3 +289,5 @@
};
};
};
+ };
+};
diff --git a/arch/arm64/boot/dts/arm/juno-r1.dts b/arch/arm64/boot/dts/arm/juno-r1.dts
index aed6389468c4..2c5db03f226c 100644
--- a/arch/arm64/boot/dts/arm/juno-r1.dts
+++ b/arch/arm64/boot/dts/arm/juno-r1.dts
@@ -201,7 +201,7 @@
};
};
- pmu_a57 {
+ pmu-a57 {
compatible = "arm,cortex-a57-pmu";
interrupts = <GIC_SPI 02 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 06 IRQ_TYPE_LEVEL_HIGH>;
@@ -209,7 +209,7 @@
<&A57_1>;
};
- pmu_a53 {
+ pmu-a53 {
compatible = "arm,cortex-a53-pmu";
interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
@@ -278,6 +278,10 @@
remote-endpoint = <&csys2_funnel_out_port>;
};
+&csys1_funnel_in_port0 {
+ remote-endpoint = <&stm_out_port>;
+};
+
&stm_out_port {
remote-endpoint = <&csys1_funnel_in_port0>;
};
diff --git a/arch/arm64/boot/dts/arm/juno-r2.dts b/arch/arm64/boot/dts/arm/juno-r2.dts
index b39b6d6ec5aa..c51950f4a1b6 100644
--- a/arch/arm64/boot/dts/arm/juno-r2.dts
+++ b/arch/arm64/boot/dts/arm/juno-r2.dts
@@ -201,7 +201,7 @@
};
};
- pmu_a72 {
+ pmu-a72 {
compatible = "arm,cortex-a72-pmu";
interrupts = <GIC_SPI 02 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 06 IRQ_TYPE_LEVEL_HIGH>;
@@ -209,7 +209,7 @@
<&A72_1>;
};
- pmu_a53 {
+ pmu-a53 {
compatible = "arm,cortex-a53-pmu";
interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
@@ -278,6 +278,10 @@
remote-endpoint = <&csys2_funnel_out_port>;
};
+&csys1_funnel_in_port0 {
+ remote-endpoint = <&stm_out_port>;
+};
+
&stm_out_port {
remote-endpoint = <&csys1_funnel_in_port0>;
};
diff --git a/arch/arm64/boot/dts/arm/juno.dts b/arch/arm64/boot/dts/arm/juno.dts
index c9236c4b967d..2b2bf39c30ef 100644
--- a/arch/arm64/boot/dts/arm/juno.dts
+++ b/arch/arm64/boot/dts/arm/juno.dts
@@ -200,7 +200,7 @@
};
};
- pmu_a57 {
+ pmu-a57 {
compatible = "arm,cortex-a57-pmu";
interrupts = <GIC_SPI 02 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 06 IRQ_TYPE_LEVEL_HIGH>;
@@ -208,7 +208,7 @@
<&A57_1>;
};
- pmu_a53 {
+ pmu-a53 {
compatible = "arm,cortex-a53-pmu";
interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts b/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts
index 06c8117e812a..602f63f72c37 100644
--- a/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts
+++ b/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts
@@ -12,6 +12,8 @@
/memreserve/ 0x80000000 0x00010000;
+#include "rtsm_ve-motherboard.dtsi"
+
/ {
model = "RTSM_VE_AEMv8A";
compatible = "arm,rtsm_ve,aemv8a", "arm,vexpress";
@@ -162,7 +164,5 @@
<0 0 40 &gic 0 40 4>,
<0 0 41 &gic 0 41 4>,
<0 0 42 &gic 0 42 4>;
-
- /include/ "rtsm_ve-motherboard.dtsi"
};
};
diff --git a/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi b/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi
index 1134e5d8df18..d2dbc3f39263 100644
--- a/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi
+++ b/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi
@@ -7,270 +7,273 @@
*
* VEMotherBoard.lisa
*/
-
- motherboard {
- arm,v2m-memory-map = "rs1";
- compatible = "arm,vexpress,v2m-p1", "simple-bus";
- #address-cells = <2>; /* SMB chipselect number and offset */
- #size-cells = <1>;
- #interrupt-cells = <1>;
- ranges;
-
- flash@0,00000000 {
- compatible = "arm,vexpress-flash", "cfi-flash";
- reg = <0 0x00000000 0x04000000>,
- <4 0x00000000 0x04000000>;
- bank-width = <4>;
- };
-
- v2m_video_ram: vram@2,00000000 {
- compatible = "arm,vexpress-vram";
- reg = <2 0x00000000 0x00800000>;
- };
-
- ethernet@2,02000000 {
- compatible = "smsc,lan91c111";
- reg = <2 0x02000000 0x10000>;
- interrupts = <15>;
- };
-
- v2m_clk24mhz: clk24mhz {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <24000000>;
- clock-output-names = "v2m:clk24mhz";
- };
-
- v2m_refclk1mhz: refclk1mhz {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <1000000>;
- clock-output-names = "v2m:refclk1mhz";
- };
-
- v2m_refclk32khz: refclk32khz {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <32768>;
- clock-output-names = "v2m:refclk32khz";
- };
-
- iofpga@3,00000000 {
- compatible = "simple-bus";
- #address-cells = <1>;
+/ {
+ smb@8000000 {
+ motherboard {
+ arm,v2m-memory-map = "rs1";
+ compatible = "arm,vexpress,v2m-p1", "simple-bus";
+ #address-cells = <2>; /* SMB chipselect number and offset */
#size-cells = <1>;
- ranges = <0 3 0 0x200000>;
-
- v2m_sysreg: sysreg@10000 {
- compatible = "arm,vexpress-sysreg";
- reg = <0x010000 0x1000>;
- gpio-controller;
- #gpio-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges;
+
+ flash@0,00000000 {
+ compatible = "arm,vexpress-flash", "cfi-flash";
+ reg = <0 0x00000000 0x04000000>,
+ <4 0x00000000 0x04000000>;
+ bank-width = <4>;
};
- v2m_sysctl: sysctl@20000 {
- compatible = "arm,sp810", "arm,primecell";
- reg = <0x020000 0x1000>;
- clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&v2m_clk24mhz>;
- clock-names = "refclk", "timclk", "apb_pclk";
- #clock-cells = <1>;
- clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
- assigned-clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_sysctl 3>, <&v2m_sysctl 3>;
- assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>;
+ v2m_video_ram: vram@2,00000000 {
+ compatible = "arm,vexpress-vram";
+ reg = <2 0x00000000 0x00800000>;
};
- aaci@40000 {
- compatible = "arm,pl041", "arm,primecell";
- reg = <0x040000 0x1000>;
- interrupts = <11>;
- clocks = <&v2m_clk24mhz>;
- clock-names = "apb_pclk";
+ ethernet@2,02000000 {
+ compatible = "smsc,lan91c111";
+ reg = <2 0x02000000 0x10000>;
+ interrupts = <15>;
};
- mmci@50000 {
- compatible = "arm,pl180", "arm,primecell";
- reg = <0x050000 0x1000>;
- interrupts = <9 10>;
- cd-gpios = <&v2m_sysreg 0 0>;
- wp-gpios = <&v2m_sysreg 1 0>;
- max-frequency = <12000000>;
- vmmc-supply = <&v2m_fixed_3v3>;
- clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
- clock-names = "mclk", "apb_pclk";
+ v2m_clk24mhz: clk24mhz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24000000>;
+ clock-output-names = "v2m:clk24mhz";
};
- kmi@60000 {
- compatible = "arm,pl050", "arm,primecell";
- reg = <0x060000 0x1000>;
- interrupts = <12>;
- clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
- clock-names = "KMIREFCLK", "apb_pclk";
+ v2m_refclk1mhz: refclk1mhz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <1000000>;
+ clock-output-names = "v2m:refclk1mhz";
};
- kmi@70000 {
- compatible = "arm,pl050", "arm,primecell";
- reg = <0x070000 0x1000>;
- interrupts = <13>;
- clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
- clock-names = "KMIREFCLK", "apb_pclk";
+ v2m_refclk32khz: refclk32khz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-output-names = "v2m:refclk32khz";
};
- v2m_serial0: uart@90000 {
- compatible = "arm,pl011", "arm,primecell";
- reg = <0x090000 0x1000>;
- interrupts = <5>;
- clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
- clock-names = "uartclk", "apb_pclk";
- };
+ iofpga@3,00000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 3 0 0x200000>;
+
+ v2m_sysreg: sysreg@10000 {
+ compatible = "arm,vexpress-sysreg";
+ reg = <0x010000 0x1000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
- v2m_serial1: uart@a0000 {
- compatible = "arm,pl011", "arm,primecell";
- reg = <0x0a0000 0x1000>;
- interrupts = <6>;
- clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
- clock-names = "uartclk", "apb_pclk";
- };
+ v2m_sysctl: sysctl@20000 {
+ compatible = "arm,sp810", "arm,primecell";
+ reg = <0x020000 0x1000>;
+ clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&v2m_clk24mhz>;
+ clock-names = "refclk", "timclk", "apb_pclk";
+ #clock-cells = <1>;
+ clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
+ assigned-clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_sysctl 3>, <&v2m_sysctl 3>;
+ assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>;
+ };
- v2m_serial2: uart@b0000 {
- compatible = "arm,pl011", "arm,primecell";
- reg = <0x0b0000 0x1000>;
- interrupts = <7>;
- clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
- clock-names = "uartclk", "apb_pclk";
- };
+ aaci@40000 {
+ compatible = "arm,pl041", "arm,primecell";
+ reg = <0x040000 0x1000>;
+ interrupts = <11>;
+ clocks = <&v2m_clk24mhz>;
+ clock-names = "apb_pclk";
+ };
- v2m_serial3: uart@c0000 {
- compatible = "arm,pl011", "arm,primecell";
- reg = <0x0c0000 0x1000>;
- interrupts = <8>;
- clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
- clock-names = "uartclk", "apb_pclk";
- };
+ mmci@50000 {
+ compatible = "arm,pl180", "arm,primecell";
+ reg = <0x050000 0x1000>;
+ interrupts = <9 10>;
+ cd-gpios = <&v2m_sysreg 0 0>;
+ wp-gpios = <&v2m_sysreg 1 0>;
+ max-frequency = <12000000>;
+ vmmc-supply = <&v2m_fixed_3v3>;
+ clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+ clock-names = "mclk", "apb_pclk";
+ };
- wdt@f0000 {
- compatible = "arm,sp805", "arm,primecell";
- reg = <0x0f0000 0x1000>;
- interrupts = <0>;
- clocks = <&v2m_refclk32khz>, <&v2m_clk24mhz>;
- clock-names = "wdogclk", "apb_pclk";
- };
+ kmi@60000 {
+ compatible = "arm,pl050", "arm,primecell";
+ reg = <0x060000 0x1000>;
+ interrupts = <12>;
+ clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+ clock-names = "KMIREFCLK", "apb_pclk";
+ };
- v2m_timer01: timer@110000 {
- compatible = "arm,sp804", "arm,primecell";
- reg = <0x110000 0x1000>;
- interrupts = <2>;
- clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_clk24mhz>;
- clock-names = "timclken1", "timclken2", "apb_pclk";
- };
+ kmi@70000 {
+ compatible = "arm,pl050", "arm,primecell";
+ reg = <0x070000 0x1000>;
+ interrupts = <13>;
+ clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+ clock-names = "KMIREFCLK", "apb_pclk";
+ };
- v2m_timer23: timer@120000 {
- compatible = "arm,sp804", "arm,primecell";
- reg = <0x120000 0x1000>;
- interrupts = <3>;
- clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&v2m_clk24mhz>;
- clock-names = "timclken1", "timclken2", "apb_pclk";
- };
+ v2m_serial0: uart@90000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x090000 0x1000>;
+ interrupts = <5>;
+ clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+ clock-names = "uartclk", "apb_pclk";
+ };
- rtc@170000 {
- compatible = "arm,pl031", "arm,primecell";
- reg = <0x170000 0x1000>;
- interrupts = <4>;
- clocks = <&v2m_clk24mhz>;
- clock-names = "apb_pclk";
- };
+ v2m_serial1: uart@a0000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0a0000 0x1000>;
+ interrupts = <6>;
+ clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+ clock-names = "uartclk", "apb_pclk";
+ };
- clcd@1f0000 {
- compatible = "arm,pl111", "arm,primecell";
- reg = <0x1f0000 0x1000>;
- interrupt-names = "combined";
- interrupts = <14>;
- clocks = <&v2m_oscclk1>, <&v2m_clk24mhz>;
- clock-names = "clcdclk", "apb_pclk";
- arm,pl11x,framebuffer = <0x18000000 0x00180000>;
- memory-region = <&v2m_video_ram>;
- max-memory-bandwidth = <130000000>; /* 16bpp @ 63.5MHz */
-
- port {
- v2m_clcd_pads: endpoint {
- remote-endpoint = <&v2m_clcd_panel>;
- arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
- };
+ v2m_serial2: uart@b0000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0b0000 0x1000>;
+ interrupts = <7>;
+ clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+ clock-names = "uartclk", "apb_pclk";
};
- panel {
- compatible = "panel-dpi";
+ v2m_serial3: uart@c0000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0c0000 0x1000>;
+ interrupts = <8>;
+ clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ wdt@f0000 {
+ compatible = "arm,sp805", "arm,primecell";
+ reg = <0x0f0000 0x1000>;
+ interrupts = <0>;
+ clocks = <&v2m_refclk32khz>, <&v2m_clk24mhz>;
+ clock-names = "wdogclk", "apb_pclk";
+ };
+
+ v2m_timer01: timer@110000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0x110000 0x1000>;
+ interrupts = <2>;
+ clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_clk24mhz>;
+ clock-names = "timclken1", "timclken2", "apb_pclk";
+ };
+
+ v2m_timer23: timer@120000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0x120000 0x1000>;
+ interrupts = <3>;
+ clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&v2m_clk24mhz>;
+ clock-names = "timclken1", "timclken2", "apb_pclk";
+ };
+
+ rtc@170000 {
+ compatible = "arm,pl031", "arm,primecell";
+ reg = <0x170000 0x1000>;
+ interrupts = <4>;
+ clocks = <&v2m_clk24mhz>;
+ clock-names = "apb_pclk";
+ };
+
+ clcd@1f0000 {
+ compatible = "arm,pl111", "arm,primecell";
+ reg = <0x1f0000 0x1000>;
+ interrupt-names = "combined";
+ interrupts = <14>;
+ clocks = <&v2m_oscclk1>, <&v2m_clk24mhz>;
+ clock-names = "clcdclk", "apb_pclk";
+ arm,pl11x,framebuffer = <0x18000000 0x00180000>;
+ memory-region = <&v2m_video_ram>;
+ max-memory-bandwidth = <130000000>; /* 16bpp @ 63.5MHz */
port {
- v2m_clcd_panel: endpoint {
- remote-endpoint = <&v2m_clcd_pads>;
+ v2m_clcd_pads: endpoint {
+ remote-endpoint = <&v2m_clcd_panel>;
+ arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
};
};
- panel-timing {
- clock-frequency = <63500127>;
- hactive = <1024>;
- hback-porch = <152>;
- hfront-porch = <48>;
- hsync-len = <104>;
- vactive = <768>;
- vback-porch = <23>;
- vfront-porch = <3>;
- vsync-len = <4>;
+ panel {
+ compatible = "panel-dpi";
+
+ port {
+ v2m_clcd_panel: endpoint {
+ remote-endpoint = <&v2m_clcd_pads>;
+ };
+ };
+
+ panel-timing {
+ clock-frequency = <63500127>;
+ hactive = <1024>;
+ hback-porch = <152>;
+ hfront-porch = <48>;
+ hsync-len = <104>;
+ vactive = <768>;
+ vback-porch = <23>;
+ vfront-porch = <3>;
+ vsync-len = <4>;
+ };
};
};
- };
- virtio-block@130000 {
- compatible = "virtio,mmio";
- reg = <0x130000 0x200>;
- interrupts = <42>;
+ virtio-block@130000 {
+ compatible = "virtio,mmio";
+ reg = <0x130000 0x200>;
+ interrupts = <42>;
+ };
};
- };
-
- v2m_fixed_3v3: v2m-3v3 {
- compatible = "regulator-fixed";
- regulator-name = "3V3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- mcc {
- compatible = "arm,vexpress,config-bus";
- arm,vexpress,config-bridge = <&v2m_sysreg>;
- v2m_oscclk1: oscclk1 {
- /* CLCD clock */
- compatible = "arm,vexpress-osc";
- arm,vexpress-sysreg,func = <1 1>;
- freq-range = <23750000 63500000>;
- #clock-cells = <0>;
- clock-output-names = "v2m:oscclk1";
+ v2m_fixed_3v3: v2m-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
};
- reset {
- compatible = "arm,vexpress-reset";
- arm,vexpress-sysreg,func = <5 0>;
- };
+ mcc {
+ compatible = "arm,vexpress,config-bus";
+ arm,vexpress,config-bridge = <&v2m_sysreg>;
+
+ v2m_oscclk1: oscclk1 {
+ /* CLCD clock */
+ compatible = "arm,vexpress-osc";
+ arm,vexpress-sysreg,func = <1 1>;
+ freq-range = <23750000 63500000>;
+ #clock-cells = <0>;
+ clock-output-names = "v2m:oscclk1";
+ };
- muxfpga {
- compatible = "arm,vexpress-muxfpga";
- arm,vexpress-sysreg,func = <7 0>;
- };
+ reset {
+ compatible = "arm,vexpress-reset";
+ arm,vexpress-sysreg,func = <5 0>;
+ };
- shutdown {
- compatible = "arm,vexpress-shutdown";
- arm,vexpress-sysreg,func = <8 0>;
- };
+ muxfpga {
+ compatible = "arm,vexpress-muxfpga";
+ arm,vexpress-sysreg,func = <7 0>;
+ };
- reboot {
- compatible = "arm,vexpress-reboot";
- arm,vexpress-sysreg,func = <9 0>;
- };
+ shutdown {
+ compatible = "arm,vexpress-shutdown";
+ arm,vexpress-sysreg,func = <8 0>;
+ };
+
+ reboot {
+ compatible = "arm,vexpress-reboot";
+ arm,vexpress-sysreg,func = <9 0>;
+ };
- dvimode {
- compatible = "arm,vexpress-dvimode";
- arm,vexpress-sysreg,func = <11 0>;
+ dvimode {
+ compatible = "arm,vexpress-dvimode";
+ arm,vexpress-sysreg,func = <11 0>;
+ };
};
};
};
+};
diff --git a/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts b/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts
index 1c9eadc2d71e..38880380e0fa 100644
--- a/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts
+++ b/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts
@@ -13,6 +13,7 @@
/dts-v1/;
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "vexpress-v2m-rs1.dtsi"
/ {
model = "V2F-1XV7 Cortex-A53x2 SMM";
@@ -129,7 +130,7 @@
};
};
- smb@8000000 {
+ smb: smb@8000000 {
compatible = "simple-bus";
#address-cells = <2>;
@@ -186,7 +187,5 @@
<0 0 40 &gic GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
<0 0 41 &gic GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
<0 0 42 &gic GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
-
- /include/ "vexpress-v2m-rs1.dtsi"
};
};
diff --git a/arch/arm64/boot/dts/broadcom/Makefile b/arch/arm64/boot/dts/broadcom/Makefile
index 2a2591ef1fee..1193a9e34bbb 100644
--- a/arch/arm64/boot/dts/broadcom/Makefile
+++ b/arch/arm64/boot/dts/broadcom/Makefile
@@ -1,5 +1,6 @@
# SPDX-License-Identifier: GPL-2.0
-dtb-$(CONFIG_ARCH_BCM2835) += bcm2837-rpi-3-b.dtb
+dtb-$(CONFIG_ARCH_BCM2835) += bcm2837-rpi-3-b.dtb \
+ bcm2837-rpi-3-b-plus.dtb
subdir-y += northstar2
subdir-y += stingray
diff --git a/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b-plus.dts b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b-plus.dts
new file mode 100644
index 000000000000..46ad2023cccf
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b-plus.dts
@@ -0,0 +1,2 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "arm/bcm2837-rpi-3-b-plus.dts"
diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
index 1ad8677f6a0a..038c99792ccb 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
@@ -18,8 +18,8 @@
/ {
compatible = "samsung,exynos5433";
- #address-cells = <2>;
- #size-cells = <2>;
+ #address-cells = <1>;
+ #size-cells = <1>;
interrupt-parent = <&gic>;
@@ -231,18 +231,11 @@
cpu_on = <0xC4000003>;
};
- reboot: syscon-reboot {
- compatible = "syscon-reboot";
- regmap = <&pmu_system_controller>;
- offset = <0x400>; /* SWRESET */
- mask = <0x1>;
- };
-
soc: soc {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
- ranges = <0x0 0x0 0x0 0x18000000>;
+ ranges;
arm_a53_pmu {
compatible = "arm,cortex-a53-pmu", "arm,armv8-pmuv3";
@@ -799,6 +792,13 @@
#clock-cells = <1>;
clock-names = "clkout16";
clocks = <&xxti>;
+
+ reboot: syscon-reboot {
+ compatible = "syscon-reboot";
+ regmap = <&pmu_system_controller>;
+ offset = <0x400>; /* SWRESET */
+ mask = <0x1>;
+ };
};
gic: interrupt-controller@11001000 {
@@ -829,11 +829,16 @@
<&cmu_disp CLK_ACLK_SMMU_DECON0X>,
<&cmu_disp CLK_ACLK_XIU_DECON0X>,
<&cmu_disp CLK_PCLK_SMMU_DECON0X>,
+ <&cmu_disp CLK_ACLK_SMMU_DECON1X>,
+ <&cmu_disp CLK_ACLK_XIU_DECON1X>,
+ <&cmu_disp CLK_PCLK_SMMU_DECON1X>,
<&cmu_disp CLK_SCLK_DECON_VCLK>,
<&cmu_disp CLK_SCLK_DECON_ECLK>;
clock-names = "pclk", "aclk_decon", "aclk_smmu_decon0x",
"aclk_xiu_decon0x", "pclk_smmu_decon0x",
- "sclk_decon_vclk", "sclk_decon_eclk";
+ "aclk_smmu_decon1x", "aclk_xiu_decon1x",
+ "pclk_smmu_decon1x", "sclk_decon_vclk",
+ "sclk_decon_eclk";
power-domains = <&pd_disp>;
interrupt-names = "fifo", "vsync", "lcd_sys";
interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
@@ -866,11 +871,16 @@
<&cmu_disp CLK_ACLK_SMMU_TV0X>,
<&cmu_disp CLK_ACLK_XIU_TV0X>,
<&cmu_disp CLK_PCLK_SMMU_TV0X>,
+ <&cmu_disp CLK_ACLK_SMMU_TV1X>,
+ <&cmu_disp CLK_ACLK_XIU_TV1X>,
+ <&cmu_disp CLK_PCLK_SMMU_TV1X>,
<&cmu_disp CLK_SCLK_DECON_TV_VCLK>,
<&cmu_disp CLK_SCLK_DECON_TV_ECLK>;
clock-names = "pclk", "aclk_decon", "aclk_smmu_decon0x",
"aclk_xiu_decon0x", "pclk_smmu_decon0x",
- "sclk_decon_vclk", "sclk_decon_eclk";
+ "aclk_smmu_decon1x", "aclk_xiu_decon1x",
+ "pclk_smmu_decon1x", "sclk_decon_vclk",
+ "sclk_decon_eclk";
samsung,disp-sysreg = <&syscon_disp>;
power-domains = <&pd_disp>;
interrupt-names = "fifo", "vsync", "lcd_sys";
@@ -1034,6 +1044,30 @@
power-domains = <&pd_gscl>;
};
+ scaler_0: scaler@15000000 {
+ compatible = "samsung,exynos5433-scaler";
+ reg = <0x15000000 0x1294>;
+ interrupts = <0 402 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "pclk", "aclk", "aclk_xiu";
+ clocks = <&cmu_mscl CLK_PCLK_M2MSCALER0>,
+ <&cmu_mscl CLK_ACLK_M2MSCALER0>,
+ <&cmu_mscl CLK_ACLK_XIU_MSCLX>;
+ iommus = <&sysmmu_scaler_0>;
+ power-domains = <&pd_mscl>;
+ };
+
+ scaler_1: scaler@15010000 {
+ compatible = "samsung,exynos5433-scaler";
+ reg = <0x15010000 0x1294>;
+ interrupts = <0 403 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "pclk", "aclk", "aclk_xiu";
+ clocks = <&cmu_mscl CLK_PCLK_M2MSCALER1>,
+ <&cmu_mscl CLK_ACLK_M2MSCALER1>,
+ <&cmu_mscl CLK_ACLK_XIU_MSCLX>;
+ iommus = <&sysmmu_scaler_1>;
+ power-domains = <&pd_mscl>;
+ };
+
jpeg: codec@15020000 {
compatible = "samsung,exynos5433-jpeg";
reg = <0x15020000 0x10000>;
@@ -1137,6 +1171,28 @@
power-domains = <&pd_gscl>;
};
+ sysmmu_scaler_0: sysmmu@0x15040000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x15040000 0x1000>;
+ interrupts = <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "pclk", "aclk";
+ clocks = <&cmu_mscl CLK_PCLK_SMMU_M2MSCALER0>,
+ <&cmu_mscl CLK_ACLK_SMMU_M2MSCALER0>;
+ #iommu-cells = <0>;
+ power-domains = <&pd_mscl>;
+ };
+
+ sysmmu_scaler_1: sysmmu@0x15050000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x15050000 0x1000>;
+ interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "pclk", "aclk";
+ clocks = <&cmu_mscl CLK_PCLK_SMMU_M2MSCALER1>,
+ <&cmu_mscl CLK_ACLK_SMMU_M2MSCALER1>;
+ #iommu-cells = <0>;
+ power-domains = <&pd_mscl>;
+ };
+
sysmmu_jpeg: sysmmu@15060000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x15060000 0x1000>;
diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi
index ad9dce6894ce..93a84338938a 100644
--- a/arch/arm64/boot/dts/exynos/exynos7.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi
@@ -12,8 +12,8 @@
/ {
compatible = "samsung,exynos7";
interrupt-parent = <&gic>;
- #address-cells = <2>;
- #size-cells = <2>;
+ #address-cells = <1>;
+ #size-cells = <1>;
aliases {
pinctrl0 = &pinctrl_alive;
@@ -70,7 +70,7 @@
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
- ranges = <0 0 0 0x18000000>;
+ ranges;
chipid@10000000 {
compatible = "samsung,exynos4210-chipid";
@@ -494,13 +494,13 @@
pmu_system_controller: system-controller@105c0000 {
compatible = "samsung,exynos7-pmu", "syscon";
reg = <0x105c0000 0x5000>;
- };
- reboot: syscon-reboot {
- compatible = "syscon-reboot";
- regmap = <&pmu_system_controller>;
- offset = <0x0400>;
- mask = <0x1>;
+ reboot: syscon-reboot {
+ compatible = "syscon-reboot";
+ regmap = <&pmu_system_controller>;
+ offset = <0x0400>;
+ mask = <0x1>;
+ };
};
rtc: rtc@10590000 {
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
index bb788eddf9f4..205f0f4c5df0 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
@@ -53,11 +53,11 @@
aliases {
crypto = &crypto;
- rtic_a = &rtic_a;
- rtic_b = &rtic_b;
- rtic_c = &rtic_c;
- rtic_d = &rtic_d;
- sec_mon = &sec_mon;
+ rtic-a = &rtic_a;
+ rtic-b = &rtic_b;
+ rtic-c = &rtic_c;
+ rtic-d = &rtic_d;
+ sec-mon = &sec_mon;
};
cpus {
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
index 5498c705ae6a..061647bd97b8 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
@@ -134,7 +134,7 @@
&dspi {
status = "okay";
- dflash0: n25q512a {
+ dflash0: n25q512a@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,m25p80";
diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
index ec3eb8e33a3a..8d477dcbfa58 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
@@ -7,6 +7,7 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/hi3660-clock.h>
+#include <dt-bindings/thermal/thermal.h>
/ {
compatible = "hisilicon,hi3660";
@@ -62,6 +63,10 @@
next-level-cache = <&A53_L2>;
cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_0>;
capacity-dmips-mhz = <592>;
+ clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER0>;
+ operating-points-v2 = <&cluster0_opp>;
+ #cooling-cells = <2>;
+ dynamic-power-coefficient = <110>;
};
cpu1: cpu@1 {
@@ -72,6 +77,8 @@
next-level-cache = <&A53_L2>;
cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_0>;
capacity-dmips-mhz = <592>;
+ clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER0>;
+ operating-points-v2 = <&cluster0_opp>;
};
cpu2: cpu@2 {
@@ -82,6 +89,8 @@
next-level-cache = <&A53_L2>;
cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_0>;
capacity-dmips-mhz = <592>;
+ clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER0>;
+ operating-points-v2 = <&cluster0_opp>;
};
cpu3: cpu@3 {
@@ -92,6 +101,8 @@
next-level-cache = <&A53_L2>;
cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_0>;
capacity-dmips-mhz = <592>;
+ clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER0>;
+ operating-points-v2 = <&cluster0_opp>;
};
cpu4: cpu@100 {
@@ -102,6 +113,10 @@
next-level-cache = <&A73_L2>;
cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_1>;
capacity-dmips-mhz = <1024>;
+ clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER1>;
+ operating-points-v2 = <&cluster1_opp>;
+ #cooling-cells = <2>;
+ dynamic-power-coefficient = <550>;
};
cpu5: cpu@101 {
@@ -112,6 +127,8 @@
next-level-cache = <&A73_L2>;
cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_1>;
capacity-dmips-mhz = <1024>;
+ clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER1>;
+ operating-points-v2 = <&cluster1_opp>;
};
cpu6: cpu@102 {
@@ -122,6 +139,8 @@
next-level-cache = <&A73_L2>;
cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_1>;
capacity-dmips-mhz = <1024>;
+ clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER1>;
+ operating-points-v2 = <&cluster1_opp>;
};
cpu7: cpu@103 {
@@ -132,6 +151,8 @@
next-level-cache = <&A73_L2>;
cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_1>;
capacity-dmips-mhz = <1024>;
+ clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER1>;
+ operating-points-v2 = <&cluster1_opp>;
};
idle-states {
@@ -174,6 +195,76 @@
};
};
+ cluster0_opp: opp_table0 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp00 {
+ opp-hz = /bits/ 64 <533000000>;
+ opp-microvolt = <700000>;
+ clock-latency-ns = <300000>;
+ };
+
+ opp01 {
+ opp-hz = /bits/ 64 <999000000>;
+ opp-microvolt = <800000>;
+ clock-latency-ns = <300000>;
+ };
+
+ opp02 {
+ opp-hz = /bits/ 64 <1402000000>;
+ opp-microvolt = <900000>;
+ clock-latency-ns = <300000>;
+ };
+
+ opp03 {
+ opp-hz = /bits/ 64 <1709000000>;
+ opp-microvolt = <1000000>;
+ clock-latency-ns = <300000>;
+ };
+
+ opp04 {
+ opp-hz = /bits/ 64 <1844000000>;
+ opp-microvolt = <1100000>;
+ clock-latency-ns = <300000>;
+ };
+ };
+
+ cluster1_opp: opp_table1 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp10 {
+ opp-hz = /bits/ 64 <903000000>;
+ opp-microvolt = <700000>;
+ clock-latency-ns = <300000>;
+ };
+
+ opp11 {
+ opp-hz = /bits/ 64 <1421000000>;
+ opp-microvolt = <800000>;
+ clock-latency-ns = <300000>;
+ };
+
+ opp12 {
+ opp-hz = /bits/ 64 <1805000000>;
+ opp-microvolt = <900000>;
+ clock-latency-ns = <300000>;
+ };
+
+ opp13 {
+ opp-hz = /bits/ 64 <2112000000>;
+ opp-microvolt = <1000000>;
+ clock-latency-ns = <300000>;
+ };
+
+ opp14 {
+ opp-hz = /bits/ 64 <2362000000>;
+ opp-microvolt = <1100000>;
+ clock-latency-ns = <300000>;
+ };
+ };
+
gic: interrupt-controller@e82b0000 {
compatible = "arm,gic-400";
reg = <0x0 0xe82b1000 0 0x1000>, /* GICD */
@@ -274,6 +365,21 @@
#reset-cells = <2>;
};
+ mailbox: mailbox@e896b000 {
+ compatible = "hisilicon,hi3660-mbox";
+ reg = <0x0 0xe896b000 0x0 0x1000>;
+ interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
+ #mbox-cells = <3>;
+ };
+
+ stub_clock: stub_clock@e896b500 {
+ compatible = "hisilicon,hi3660-stub-clk";
+ reg = <0x0 0xe896b500 0x0 0x0100>;
+ #clock-cells = <1>;
+ mboxes = <&mailbox 13 3 0>;
+ };
+
dual_timer0: timer@fff14000 {
compatible = "arm,sp804", "arm,primecell";
reg = <0x0 0xfff14000 0x0 0x1000>;
@@ -872,6 +978,8 @@
0x0 0x02000000>;
num-lanes = <1>;
#interrupt-cells = <1>;
+ interrupts = <0 283 4>;
+ interrupt-names = "msi";
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <0x0 0 0 1
&gic GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
@@ -972,5 +1080,44 @@
interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
#thermal-sensor-cells = <1>;
};
+
+ thermal-zones {
+
+ cls0: cls0 {
+ polling-delay = <1000>;
+ polling-delay-passive = <100>;
+ sustainable-power = <4500>;
+
+ /* sensor ID */
+ thermal-sensors = <&tsensor 1>;
+
+ trips {
+ threshold: trip-point@0 {
+ temperature = <65000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ target: trip-point@1 {
+ temperature = <75000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&target>;
+ contribution = <1024>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ map1 {
+ trip = <&target>;
+ contribution = <512>;
+ cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+ };
};
};
diff --git a/arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts b/arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts
index 4d5d644abb12..d30f6eb8a5ee 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts
@@ -11,6 +11,7 @@
#include <dt-bindings/gpio/gpio.h>
#include "hi3798cv200.dtsi"
+#include "poplar-pinctrl.dtsi"
/ {
model = "HiSilicon Poplar Development Board";
@@ -61,6 +62,33 @@
default-state = "off";
};
};
+
+ reg_pcie: regulator-pcie {
+ compatible = "regulator-fixed";
+ regulator-name = "3V3_PCIE0";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio6 7 0>;
+ enable-active-high;
+ };
+};
+
+&ehci {
+ status = "okay";
+};
+
+&emmc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_pins_1 &emmc_pins_2
+ &emmc_pins_3 &emmc_pins_4>;
+ fifo-depth = <256>;
+ clock-frequency = <200000000>;
+ cap-mmc-highspeed;
+ mmc-ddr-1_8v;
+ mmc-hs200-1_8v;
+ non-removable;
+ bus-width = <8>;
+ status = "okay";
};
&gmac1 {
@@ -146,6 +174,16 @@
status = "okay";
};
+&ohci {
+ status = "okay";
+};
+
+&pcie {
+ reset-gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>;
+ vpcie-supply = <&reg_pcie>;
+ status = "okay";
+};
+
&sd0 {
bus-width = <4>;
cap-sd-highspeed;
diff --git a/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi b/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi
index 962bd79139e4..7c0fddd7c8cf 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi
@@ -8,7 +8,9 @@
*/
#include <dt-bindings/clock/histb-clock.h>
+#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/phy/phy.h>
#include <dt-bindings/reset/ti-syscon.h>
/ {
@@ -106,6 +108,113 @@
#reset-cells = <2>;
};
+ perictrl: peripheral-controller@8a20000 {
+ compatible = "hisilicon,hi3798cv200-perictrl", "syscon",
+ "simple-mfd";
+ reg = <0x8a20000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x8a20000 0x1000>;
+
+ usb2_phy1: usb2-phy@120 {
+ compatible = "hisilicon,hi3798cv200-usb2-phy";
+ reg = <0x120 0x4>;
+ clocks = <&crg HISTB_USB2_PHY1_REF_CLK>;
+ resets = <&crg 0xbc 4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usb2_phy1_port0: phy@0 {
+ reg = <0>;
+ #phy-cells = <0>;
+ resets = <&crg 0xbc 8>;
+ };
+
+ usb2_phy1_port1: phy@1 {
+ reg = <1>;
+ #phy-cells = <0>;
+ resets = <&crg 0xbc 9>;
+ };
+ };
+
+ usb2_phy2: usb2-phy@124 {
+ compatible = "hisilicon,hi3798cv200-usb2-phy";
+ reg = <0x124 0x4>;
+ clocks = <&crg HISTB_USB2_PHY2_REF_CLK>;
+ resets = <&crg 0xbc 6>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usb2_phy2_port0: phy@0 {
+ reg = <0>;
+ #phy-cells = <0>;
+ resets = <&crg 0xbc 10>;
+ };
+ };
+
+ combphy0: phy@850 {
+ compatible = "hisilicon,hi3798cv200-combphy";
+ reg = <0x850 0x8>;
+ #phy-cells = <1>;
+ clocks = <&crg HISTB_COMBPHY0_CLK>;
+ resets = <&crg 0x188 4>;
+ assigned-clocks = <&crg HISTB_COMBPHY0_CLK>;
+ assigned-clock-rates = <100000000>;
+ hisilicon,fixed-mode = <PHY_TYPE_USB3>;
+ };
+
+ combphy1: phy@858 {
+ compatible = "hisilicon,hi3798cv200-combphy";
+ reg = <0x858 0x8>;
+ #phy-cells = <1>;
+ clocks = <&crg HISTB_COMBPHY1_CLK>;
+ resets = <&crg 0x188 12>;
+ assigned-clocks = <&crg HISTB_COMBPHY1_CLK>;
+ assigned-clock-rates = <100000000>;
+ hisilicon,mode-select-bits = <0x0008 11 (0x3 << 11)>;
+ };
+ };
+
+ pmx0: pinconf@8a21000 {
+ compatible = "pinconf-single";
+ reg = <0x8a21000 0x180>;
+ pinctrl-single,register-width = <32>;
+ pinctrl-single,function-mask = <7>;
+ pinctrl-single,gpio-range = <
+ &range 0 8 2 /* GPIO 0 */
+ &range 8 1 0 /* GPIO 1 */
+ &range 9 4 2
+ &range 13 1 0
+ &range 14 1 1
+ &range 15 1 0
+ &range 16 5 0 /* GPIO 2 */
+ &range 21 3 1
+ &range 24 4 1 /* GPIO 3 */
+ &range 28 2 2
+ &range 86 1 1
+ &range 87 1 0
+ &range 30 4 2 /* GPIO 4 */
+ &range 34 3 0
+ &range 37 1 2
+ &range 38 3 2 /* GPIO 6 */
+ &range 41 5 0
+ &range 46 8 1 /* GPIO 7 */
+ &range 54 8 1 /* GPIO 8 */
+ &range 64 7 1 /* GPIO 9 */
+ &range 71 1 0
+ &range 72 6 1 /* GPIO 10 */
+ &range 78 1 0
+ &range 79 1 1
+ &range 80 6 1 /* GPIO 11 */
+ &range 70 2 1
+ &range 88 8 0 /* GPIO 12 */
+ >;
+
+ range: gpio-range {
+ #pinctrl-single,gpio-range-cells = <3>;
+ };
+ };
+
uart0: serial@8b00000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x8b00000 0x1000>;
@@ -205,12 +314,17 @@
};
emmc: mmc@9830000 {
- compatible = "snps,dw-mshc";
+ compatible = "hisilicon,hi3798cv200-dw-mshc";
reg = <0x9830000 0x10000>;
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&crg HISTB_MMC_CIU_CLK>,
- <&crg HISTB_MMC_BIU_CLK>;
- clock-names = "ciu", "biu";
+ <&crg HISTB_MMC_BIU_CLK>,
+ <&crg HISTB_MMC_SAMPLE_CLK>,
+ <&crg HISTB_MMC_DRV_CLK>;
+ clock-names = "ciu", "biu", "ciu-sample", "ciu-drive";
+ resets = <&crg 0xa0 4>;
+ reset-names = "reset";
+ status = "disabled";
};
gpio0: gpio@8b20000 {
@@ -221,6 +335,7 @@
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
+ gpio-ranges = <&pmx0 0 0 8>;
clocks = <&crg HISTB_APB_CLK>;
clock-names = "apb_pclk";
status = "disabled";
@@ -234,6 +349,13 @@
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
+ gpio-ranges = <
+ &pmx0 0 8 1
+ &pmx0 1 9 4
+ &pmx0 5 13 1
+ &pmx0 6 14 1
+ &pmx0 7 15 1
+ >;
clocks = <&crg HISTB_APB_CLK>;
clock-names = "apb_pclk";
status = "disabled";
@@ -247,6 +369,7 @@
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
+ gpio-ranges = <&pmx0 0 16 5 &pmx0 5 21 3>;
clocks = <&crg HISTB_APB_CLK>;
clock-names = "apb_pclk";
status = "disabled";
@@ -260,6 +383,12 @@
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
+ gpio-ranges = <
+ &pmx0 0 24 4
+ &pmx0 4 28 2
+ &pmx0 6 86 1
+ &pmx0 7 87 1
+ >;
clocks = <&crg HISTB_APB_CLK>;
clock-names = "apb_pclk";
status = "disabled";
@@ -273,6 +402,7 @@
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
+ gpio-ranges = <&pmx0 0 30 4 &pmx0 4 34 3 &pmx0 7 37 1>;
clocks = <&crg HISTB_APB_CLK>;
clock-names = "apb_pclk";
status = "disabled";
@@ -299,6 +429,7 @@
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
+ gpio-ranges = <&pmx0 0 38 3 &pmx0 0 41 5>;
clocks = <&crg HISTB_APB_CLK>;
clock-names = "apb_pclk";
status = "disabled";
@@ -312,6 +443,7 @@
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
+ gpio-ranges = <&pmx0 0 46 8>;
clocks = <&crg HISTB_APB_CLK>;
clock-names = "apb_pclk";
status = "disabled";
@@ -325,6 +457,7 @@
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
+ gpio-ranges = <&pmx0 0 54 8>;
clocks = <&crg HISTB_APB_CLK>;
clock-names = "apb_pclk";
status = "disabled";
@@ -338,6 +471,7 @@
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
+ gpio-ranges = <&pmx0 0 64 7 &pmx0 71 1>;
clocks = <&crg HISTB_APB_CLK>;
clock-names = "apb_pclk";
status = "disabled";
@@ -351,6 +485,7 @@
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
+ gpio-ranges = <&pmx0 0 72 6 &pmx0 6 78 1 &pmx0 7 79 1>;
clocks = <&crg HISTB_APB_CLK>;
clock-names = "apb_pclk";
status = "disabled";
@@ -364,6 +499,7 @@
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
+ gpio-ranges = <&pmx0 0 80 6 &pmx0 6 70 2>;
clocks = <&crg HISTB_APB_CLK>;
clock-names = "apb_pclk";
status = "disabled";
@@ -377,6 +513,7 @@
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
+ gpio-ranges = <&pmx0 0 88 8>;
clocks = <&crg HISTB_APB_CLK>;
clock-names = "apb_pclk";
status = "disabled";
@@ -419,5 +556,67 @@
clocks = <&sysctrl HISTB_IR_CLK>;
status = "disabled";
};
+
+ pcie: pcie@9860000 {
+ compatible = "hisilicon,hi3798cv200-pcie";
+ reg = <0x9860000 0x1000>,
+ <0x0 0x2000>,
+ <0x2000000 0x01000000>;
+ reg-names = "control", "rc-dbi", "config";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ bus-range = <0 15>;
+ num-lanes = <1>;
+ ranges = <0x81000000 0x0 0x00000000 0x4f00000 0x0 0x100000
+ 0x82000000 0x0 0x3000000 0x3000000 0x0 0x01f00000>;
+ interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &gic 0 131 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&crg HISTB_PCIE_AUX_CLK>,
+ <&crg HISTB_PCIE_PIPE_CLK>,
+ <&crg HISTB_PCIE_SYS_CLK>,
+ <&crg HISTB_PCIE_BUS_CLK>;
+ clock-names = "aux", "pipe", "sys", "bus";
+ resets = <&crg 0x18c 6>, <&crg 0x18c 5>, <&crg 0x18c 4>;
+ reset-names = "soft", "sys", "bus";
+ phys = <&combphy1 PHY_TYPE_PCIE>;
+ phy-names = "phy";
+ status = "disabled";
+ };
+
+ ohci: ohci@9880000 {
+ compatible = "generic-ohci";
+ reg = <0x9880000 0x10000>;
+ interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&crg HISTB_USB2_BUS_CLK>,
+ <&crg HISTB_USB2_12M_CLK>,
+ <&crg HISTB_USB2_48M_CLK>;
+ clock-names = "bus", "clk12", "clk48";
+ resets = <&crg 0xb8 12>;
+ reset-names = "bus";
+ phys = <&usb2_phy1_port0>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ ehci: ehci@9890000 {
+ compatible = "generic-ehci";
+ reg = <0x9890000 0x10000>;
+ interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&crg HISTB_USB2_BUS_CLK>,
+ <&crg HISTB_USB2_PHY_CLK>,
+ <&crg HISTB_USB2_UTMI_CLK>;
+ clock-names = "bus", "phy", "utmi";
+ resets = <&crg 0xb8 12>,
+ <&crg 0xb8 16>,
+ <&crg 0xb8 13>;
+ reset-names = "bus", "phy", "utmi";
+ phys = <&usb2_phy1_port0>;
+ phy-names = "usb";
+ status = "disabled";
+ };
};
};
diff --git a/arch/arm64/boot/dts/hisilicon/hip06-d03.dts b/arch/arm64/boot/dts/hisilicon/hip06-d03.dts
index 9af633021a42..a95c6f5619bf 100644
--- a/arch/arm64/boot/dts/hisilicon/hip06-d03.dts
+++ b/arch/arm64/boot/dts/hisilicon/hip06-d03.dts
@@ -25,6 +25,14 @@
chosen { };
};
+&ipmi0 {
+ status = "ok";
+};
+
+&uart0 {
+ status = "ok";
+};
+
&eth0 {
status = "ok";
};
diff --git a/arch/arm64/boot/dts/hisilicon/hip06.dtsi b/arch/arm64/boot/dts/hisilicon/hip06.dtsi
index 35202ebe62a7..d78a6a755d03 100644
--- a/arch/arm64/boot/dts/hisilicon/hip06.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hip06.dtsi
@@ -350,6 +350,27 @@
#size-cells = <2>;
ranges;
+ isa@a01b0000 {
+ compatible = "hisilicon,hip06-lpc";
+ #size-cells = <1>;
+ #address-cells = <2>;
+ reg = <0x0 0xa01b0000 0x0 0x1000>;
+
+ ipmi0: bt@e4 {
+ compatible = "ipmi-bt";
+ device_type = "ipmi";
+ reg = <0x01 0xe4 0x04>;
+ status = "disabled";
+ };
+
+ uart0: lpc-uart@2f8 {
+ compatible = "ns16550a";
+ clock-frequency = <1843200>;
+ reg = <0x01 0x2f8 0x08>;
+ status = "disabled";
+ };
+ };
+
refclk: refclk {
compatible = "fixed-clock";
clock-frequency = <50000000>;
diff --git a/arch/arm64/boot/dts/hisilicon/hip07-d05.dts b/arch/arm64/boot/dts/hisilicon/hip07-d05.dts
index fe7c16c36025..21147e8e3f94 100644
--- a/arch/arm64/boot/dts/hisilicon/hip07-d05.dts
+++ b/arch/arm64/boot/dts/hisilicon/hip07-d05.dts
@@ -57,6 +57,10 @@
status = "ok";
};
+&ipmi0 {
+ status = "ok";
+};
+
&usb_ohci {
status = "ok";
};
diff --git a/arch/arm64/boot/dts/hisilicon/hip07.dtsi b/arch/arm64/boot/dts/hisilicon/hip07.dtsi
index 0600a6a84ab7..9c10030a07f8 100644
--- a/arch/arm64/boot/dts/hisilicon/hip07.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hip07.dtsi
@@ -1114,6 +1114,20 @@
#size-cells = <2>;
ranges;
+ isa@a01b0000 {
+ compatible = "hisilicon,hip07-lpc";
+ #size-cells = <1>;
+ #address-cells = <2>;
+ reg = <0x0 0xa01b0000 0x0 0x1000>;
+
+ ipmi0: bt@e4 {
+ compatible = "ipmi-bt";
+ device_type = "ipmi";
+ reg = <0x01 0xe4 0x04>;
+ status = "disabled";
+ };
+ };
+
uart0: uart@602b0000 {
compatible = "arm,sbsa-uart";
reg = <0x0 0x602b0000 0x0 0x1000>;
diff --git a/arch/arm64/boot/dts/hisilicon/poplar-pinctrl.dtsi b/arch/arm64/boot/dts/hisilicon/poplar-pinctrl.dtsi
new file mode 100644
index 000000000000..7bb19e4b084a
--- /dev/null
+++ b/arch/arm64/boot/dts/hisilicon/poplar-pinctrl.dtsi
@@ -0,0 +1,98 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Pinctrl dts file for HiSilicon Poplar board
+ *
+ * Copyright (c) 2016-2018 HiSilicon Technologies Co., Ltd.
+ */
+
+#include <dt-bindings/pinctrl/hisi.h>
+
+/* value, enable bits, disable bits, mask */
+#define PINCTRL_PULLDOWN(value, enable, disable, mask) \
+ (value << 13) (enable << 13) (disable << 13) (mask << 13)
+#define PINCTRL_PULLUP(value, enable, disable, mask) \
+ (value << 12) (enable << 12) (disable << 12) (mask << 12)
+#define PINCTRL_SLEW_RATE(value, mask) (value << 8) (mask << 8)
+#define PINCTRL_DRV_STRENGTH(value, mask) (value << 4) (mask << 4)
+
+&pmx0 {
+ emmc_pins_1: emmc-pins-1 {
+ pinctrl-single,pins = <
+ 0x000 MUX_M2
+ 0x004 MUX_M2
+ 0x008 MUX_M2
+ 0x00c MUX_M2
+ 0x010 MUX_M2
+ 0x014 MUX_M2
+ 0x018 MUX_M2
+ 0x01c MUX_M2
+ 0x024 MUX_M2
+ >;
+ pinctrl-single,bias-pulldown = <
+ PINCTRL_PULLDOWN(0, 1, 0, 1)
+ >;
+ pinctrl-single,bias-pullup = <
+ PINCTRL_PULLUP(0, 1, 0, 1)
+ >;
+ pinctrl-single,slew-rate = <
+ PINCTRL_SLEW_RATE(1, 1)
+ >;
+ pinctrl-single,drive-strength = <
+ PINCTRL_DRV_STRENGTH(0xb, 0xf)
+ >;
+ };
+
+ emmc_pins_2: emmc-pins-2 {
+ pinctrl-single,pins = <
+ 0x028 MUX_M2
+ >;
+ pinctrl-single,bias-pulldown = <
+ PINCTRL_PULLDOWN(0, 1, 0, 1)
+ >;
+ pinctrl-single,bias-pullup = <
+ PINCTRL_PULLUP(0, 1, 0, 1)
+ >;
+ pinctrl-single,slew-rate = <
+ PINCTRL_SLEW_RATE(1, 1)
+ >;
+ pinctrl-single,drive-strength = <
+ PINCTRL_DRV_STRENGTH(0x9, 0xf)
+ >;
+ };
+
+ emmc_pins_3: emmc-pins-3 {
+ pinctrl-single,pins = <
+ 0x02c MUX_M2
+ >;
+ pinctrl-single,bias-pulldown = <
+ PINCTRL_PULLDOWN(0, 1, 0, 1)
+ >;
+ pinctrl-single,bias-pullup = <
+ PINCTRL_PULLUP(0, 1, 0, 1)
+ >;
+ pinctrl-single,slew-rate = <
+ PINCTRL_SLEW_RATE(1, 1)
+ >;
+ pinctrl-single,drive-strength = <
+ PINCTRL_DRV_STRENGTH(3, 3)
+ >;
+ };
+
+ emmc_pins_4: emmc-pins-4 {
+ pinctrl-single,pins = <
+ 0x030 MUX_M2
+ >;
+ pinctrl-single,bias-pulldown = <
+ PINCTRL_PULLDOWN(1, 1, 0, 1)
+ >;
+ pinctrl-single,bias-pullup = <
+ PINCTRL_PULLUP(0, 1, 0, 1)
+ >;
+ pinctrl-single,slew-rate = <
+ PINCTRL_SLEW_RATE(1, 1)
+ >;
+ pinctrl-single,drive-strength = <
+ PINCTRL_DRV_STRENGTH(3, 3)
+ >;
+ };
+};
diff --git a/arch/arm64/boot/dts/marvell/Makefile b/arch/arm64/boot/dts/marvell/Makefile
index cb454beede55..ea9d49f2a911 100644
--- a/arch/arm64/boot/dts/marvell/Makefile
+++ b/arch/arm64/boot/dts/marvell/Makefile
@@ -1,8 +1,4 @@
# SPDX-License-Identifier: GPL-2.0
-# Berlin SoC Family
-dtb-$(CONFIG_ARCH_BERLIN) += berlin4ct-dmp.dtb
-dtb-$(CONFIG_ARCH_BERLIN) += berlin4ct-stb.dtb
-
# Mvebu SoC Family
dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-db.dtb
dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin.dtb
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
index ef7fd2ca2515..3ab25ad402b9 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
@@ -63,6 +63,33 @@
status = "okay";
};
+&spi0 {
+ status = "okay";
+
+ flash@0 {
+ reg = <0>;
+ compatible = "winbond,w25q32dw", "jedec,spi-flash";
+ spi-max-frequency = <104000000>;
+ m25p,fast-read;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "uboot";
+ reg = <0 0x180000>;
+ };
+
+ partition@180000 {
+ label = "ubootenv";
+ reg = <0x180000 0x10000>;
+ };
+ };
+ };
+};
+
/* Exported on the micro USB connector J5 through an FTDI */
&uart0 {
pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
index 97207a61bc79..3353252d78a0 100644
--- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
@@ -148,10 +148,13 @@
compatible = "marvell,armada3710-nb-pinctrl",
"syscon", "simple-mfd";
reg = <0x13800 0x100>, <0x13C00 0x20>;
+ /* MPP1[19:0] */
gpionb: gpio {
#gpio-cells = <2>;
gpio-ranges = <&pinctrl_nb 0 0 36>;
gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
interrupts =
<GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
@@ -209,10 +212,13 @@
compatible = "marvell,armada3710-sb-pinctrl",
"syscon", "simple-mfd";
reg = <0x18800 0x100>, <0x18C00 0x20>;
+ /* MPP2[23:0] */
gpiosb: gpio {
#gpio-cells = <2>;
gpio-ranges = <&pinctrl_sb 0 0 30>;
gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
interrupts =
<GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/arch/arm64/boot/dts/marvell/armada-7040-db.dts b/arch/arm64/boot/dts/marvell/armada-7040-db.dts
index d6bec058a30a..412efdb46e7c 100644
--- a/arch/arm64/boot/dts/marvell/armada-7040-db.dts
+++ b/arch/arm64/boot/dts/marvell/armada-7040-db.dts
@@ -242,6 +242,11 @@
phy-mode = "10gbase-kr";
/* Generic PHY, providing serdes lanes */
phys = <&cp0_comphy2 0>;
+
+ fixed-link {
+ speed = <10000>;
+ full-duplex;
+ };
};
&cp0_eth1 {
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-db.dts b/arch/arm64/boot/dts/marvell/armada-8040-db.dts
index 5689fb23bbab..1bac437369a1 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-db.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-db.dts
@@ -177,6 +177,11 @@
&cp0_eth0 {
status = "okay";
phy-mode = "10gbase-kr";
+
+ fixed-link {
+ speed = <10000>;
+ full-duplex;
+ };
};
&cp0_eth2 {
@@ -303,6 +308,11 @@
&cp1_eth0 {
status = "okay";
phy-mode = "10gbase-kr";
+
+ fixed-link {
+ speed = <10000>;
+ full-duplex;
+ };
};
&cp1_eth1 {
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
index 81de03ef860d..a66958ff4de6 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
@@ -27,6 +27,7 @@
ethernet0 = &cp0_eth0;
ethernet1 = &cp1_eth0;
ethernet2 = &cp1_eth1;
+ ethernet3 = &cp1_eth2;
};
/* Regulator labels correspond with schematics */
@@ -64,6 +65,42 @@
compatible = "usb-nop-xceiv";
vcc-supply = <&v_5v0_usb3_hst_vbus>;
};
+
+ sfp_eth0: sfp-eth0 {
+ /* CON15,16 - CPM lane 4 */
+ compatible = "sff,sfp";
+ i2c-bus = <&sfpp0_i2c>;
+ los-gpio = <&cp1_gpio1 28 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpio = <&cp1_gpio1 27 GPIO_ACTIVE_LOW>;
+ tx-disable-gpio = <&cp1_gpio1 29 GPIO_ACTIVE_HIGH>;
+ tx-fault-gpio = <&cp1_gpio1 26 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp1_sfpp0_pins>;
+ };
+
+ sfp_eth1: sfp-eth1 {
+ /* CON17,18 - CPS lane 4 */
+ compatible = "sff,sfp";
+ i2c-bus = <&sfpp1_i2c>;
+ los-gpio = <&cp1_gpio1 8 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpio = <&cp1_gpio1 11 GPIO_ACTIVE_LOW>;
+ tx-disable-gpio = <&cp1_gpio1 10 GPIO_ACTIVE_HIGH>;
+ tx-fault-gpio = <&cp0_gpio2 30 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp1_sfpp1_pins &cp0_sfpp1_pins>;
+ };
+
+ sfp_eth3: sfp-eth3 {
+ /* CON3,4 - CPS lane 5 */
+ compatible = "sff,sfp";
+ i2c-bus = <&sfp_1g_i2c>;
+ los-gpio = <&cp0_gpio2 22 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpio = <&cp0_gpio2 21 GPIO_ACTIVE_LOW>;
+ tx-disable-gpio = <&cp1_gpio1 24 GPIO_ACTIVE_HIGH>;
+ tx-fault-gpio = <&cp0_gpio2 19 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp0_sfp_1g_pins &cp1_sfp_1g_pins>;
+ };
};
&uart0 {
@@ -171,6 +208,10 @@
marvell,pins = "mpp47";
marvell,function = "gpio";
};
+ cp0_sfp_1g_pins: sfp-1g-pins {
+ marvell,pins = "mpp51", "mpp53", "mpp54";
+ marvell,function = "gpio";
+ };
cp0_pcie_pins: pcie-pins {
marvell,pins = "mpp52";
marvell,function = "gpio";
@@ -180,6 +221,10 @@
"mpp60", "mpp61";
marvell,function = "sdio";
};
+ cp0_sfpp1_pins: sfpp1-pins {
+ marvell,pins = "mpp62";
+ marvell,function = "gpio";
+ };
};
&cp0_xmdio {
@@ -188,11 +233,13 @@
phy0: ethernet-phy@0 {
compatible = "ethernet-phy-ieee802.3-c45";
reg = <0>;
+ sfp = <&sfp_eth0>;
};
phy8: ethernet-phy@8 {
compatible = "ethernet-phy-ieee802.3-c45";
reg = <8>;
+ sfp = <&sfp_eth1>;
};
};
@@ -257,7 +304,22 @@
phys = <&cp1_comphy0 1>;
};
+&cp1_eth2 {
+ /* CPS Lane 5 */
+ status = "okay";
+ /* Network PHY */
+ phy-mode = "2500base-x";
+ managed = "in-band-status";
+ /* Generic PHY, providing serdes lanes */
+ phys = <&cp1_comphy5 2>;
+ sfp = <&sfp_eth3>;
+};
+
&cp1_pinctrl {
+ cp1_sfpp1_pins: sfpp1-pins {
+ marvell,pins = "mpp8", "mpp10", "mpp11";
+ marvell,function = "gpio";
+ };
cp1_spi1_pins: spi1-pins {
marvell,pins = "mpp12", "mpp13", "mpp14", "mpp15", "mpp16";
marvell,function = "spi1";
@@ -266,6 +328,14 @@
marvell,pins = "mpp6", "mpp7";
marvell,function = "uart0";
};
+ cp1_sfp_1g_pins: sfp-1g-pins {
+ marvell,pins = "mpp24";
+ marvell,function = "gpio";
+ };
+ cp1_sfpp0_pins: sfpp0-pins {
+ marvell,pins = "mpp26", "mpp27", "mpp28", "mpp29";
+ marvell,function = "gpio";
+ };
};
/* J27 UART header */
diff --git a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi
index ed2f1237ea1e..7dabe25f6774 100644
--- a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi
@@ -236,6 +236,7 @@
compatible = "marvell,armada-8k-ahci",
"generic-ahci";
reg = <0x540000 0x30000>;
+ dma-coherent;
interrupts = <ICU_GRP_NSR 107 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&CP110_LABEL(clk) 1 15>,
<&CP110_LABEL(clk) 1 16>;
diff --git a/arch/arm64/boot/dts/marvell/berlin4ct-dmp.dts b/arch/arm64/boot/dts/marvell/berlin4ct-dmp.dts
deleted file mode 100644
index fae6c6924705..000000000000
--- a/arch/arm64/boot/dts/marvell/berlin4ct-dmp.dts
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * Copyright (C) 2015 Marvell Technology Group Ltd.
- *
- * Author: Jisheng Zhang <jszhang@marvell.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPLv2 or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-
-#include "berlin4ct.dtsi"
-
-/ {
- model = "Marvell BG4CT DMP board";
- compatible = "marvell,berlin4ct-dmp", "marvell,berlin4ct", "marvell,berlin";
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- memory@1000000 {
- device_type = "memory";
- /* the first 16MB is for firmwares' usage */
- reg = <0 0x01000000 0 0x7f000000>;
- };
-};
-
-&uart0 {
- status = "okay";
-};
diff --git a/arch/arm64/boot/dts/marvell/berlin4ct-stb.dts b/arch/arm64/boot/dts/marvell/berlin4ct-stb.dts
deleted file mode 100644
index d47edad13e68..000000000000
--- a/arch/arm64/boot/dts/marvell/berlin4ct-stb.dts
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * Copyright (C) 2015 Marvell Technology Group Ltd.
- *
- * Author: Jisheng Zhang <jszhang@marvell.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPLv2 or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-
-#include "berlin4ct.dtsi"
-
-/ {
- model = "Marvell BG4CT STB board";
- compatible = "marvell,berlin4ct-stb", "marvell,berlin4ct", "marvell,berlin";
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- memory@1000000 {
- device_type = "memory";
- /* the first 16MB is for firmwares' usage */
- reg = <0 0x01000000 0 0x7f000000>;
- };
-};
-
-&uart0 {
- status = "okay";
-};
diff --git a/arch/arm64/boot/dts/mediatek/mt2712-pinfunc.h b/arch/arm64/boot/dts/mediatek/mt2712-pinfunc.h
new file mode 100644
index 000000000000..1b4cb0c55744
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt2712-pinfunc.h
@@ -0,0 +1,1123 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018 MediaTek Inc.
+ * Author: Zhiyong Tao <zhiyong.tao@mediatek.com>
+ *
+ */
+#ifndef __DTS_MT2712_PINFUNC_H
+#define __DTS_MT2712_PINFUNC_H
+
+#include <dt-bindings/pinctrl/mt65xx.h>
+
+#define MT2712_PIN_0_EINT0__FUNC_GPIO0 (MTK_PIN_NO(0) | 0)
+#define MT2712_PIN_0_EINT0__FUNC_EINT0 (MTK_PIN_NO(0) | 1)
+#define MT2712_PIN_0_EINT0__FUNC_MBIST_DIAG_SCANOUT (MTK_PIN_NO(0) | 2)
+#define MT2712_PIN_0_EINT0__FUNC_DSIA_TE (MTK_PIN_NO(0) | 3)
+#define MT2712_PIN_0_EINT0__FUNC_DSIC_TE (MTK_PIN_NO(0) | 4)
+#define MT2712_PIN_0_EINT0__FUNC_DIN_D3 (MTK_PIN_NO(0) | 5)
+#define MT2712_PIN_0_EINT0__FUNC_PURE_HW_PROTECT (MTK_PIN_NO(0) | 6)
+
+#define MT2712_PIN_1_EINT1__FUNC_GPIO1 (MTK_PIN_NO(1) | 0)
+#define MT2712_PIN_1_EINT1__FUNC_EINT1 (MTK_PIN_NO(1) | 1)
+#define MT2712_PIN_1_EINT1__FUNC_IR_IN (MTK_PIN_NO(1) | 2)
+#define MT2712_PIN_1_EINT1__FUNC_DSIB_TE (MTK_PIN_NO(1) | 3)
+#define MT2712_PIN_1_EINT1__FUNC_DSID_TE (MTK_PIN_NO(1) | 4)
+#define MT2712_PIN_1_EINT1__FUNC_DIN_D4 (MTK_PIN_NO(1) | 5)
+
+#define MT2712_PIN_2_EINT2__FUNC_GPIO2 (MTK_PIN_NO(2) | 0)
+#define MT2712_PIN_2_EINT2__FUNC_EINT2 (MTK_PIN_NO(2) | 1)
+#define MT2712_PIN_2_EINT2__FUNC_IR_IN (MTK_PIN_NO(2) | 2)
+#define MT2712_PIN_2_EINT2__FUNC_LCM_RST1 (MTK_PIN_NO(2) | 3)
+#define MT2712_PIN_2_EINT2__FUNC_DIN_D5 (MTK_PIN_NO(2) | 5)
+
+#define MT2712_PIN_3_EINT3__FUNC_GPIO3 (MTK_PIN_NO(3) | 0)
+#define MT2712_PIN_3_EINT3__FUNC_EINT3 (MTK_PIN_NO(3) | 1)
+#define MT2712_PIN_3_EINT3__FUNC_IR_IN (MTK_PIN_NO(3) | 2)
+#define MT2712_PIN_3_EINT3__FUNC_LCM_RST0 (MTK_PIN_NO(3) | 3)
+#define MT2712_PIN_3_EINT3__FUNC_DIN_D6 (MTK_PIN_NO(3) | 5)
+
+#define MT2712_PIN_4_PWM0__FUNC_GPIO4 (MTK_PIN_NO(4) | 0)
+#define MT2712_PIN_4_PWM0__FUNC_PWM0 (MTK_PIN_NO(4) | 1)
+#define MT2712_PIN_4_PWM0__FUNC_DISP0_PWM (MTK_PIN_NO(4) | 2)
+#define MT2712_PIN_4_PWM0__FUNC_DISP1_PWM (MTK_PIN_NO(4) | 3)
+#define MT2712_PIN_4_PWM0__FUNC_DIN_CLK (MTK_PIN_NO(4) | 5)
+
+#define MT2712_PIN_5_PWM1__FUNC_GPIO5 (MTK_PIN_NO(5) | 0)
+#define MT2712_PIN_5_PWM1__FUNC_PWM1 (MTK_PIN_NO(5) | 1)
+#define MT2712_PIN_5_PWM1__FUNC_DISP1_PWM (MTK_PIN_NO(5) | 2)
+#define MT2712_PIN_5_PWM1__FUNC_DISP0_PWM (MTK_PIN_NO(5) | 3)
+#define MT2712_PIN_5_PWM1__FUNC_DIN_VSYNC (MTK_PIN_NO(5) | 5)
+
+#define MT2712_PIN_6_PWM2__FUNC_GPIO6 (MTK_PIN_NO(6) | 0)
+#define MT2712_PIN_6_PWM2__FUNC_PWM2 (MTK_PIN_NO(6) | 1)
+#define MT2712_PIN_6_PWM2__FUNC_DISP0_PWM (MTK_PIN_NO(6) | 2)
+#define MT2712_PIN_6_PWM2__FUNC_DISP1_PWM (MTK_PIN_NO(6) | 3)
+#define MT2712_PIN_6_PWM2__FUNC_DISP2_PWM (MTK_PIN_NO(6) | 4)
+#define MT2712_PIN_6_PWM2__FUNC_DIN_HSYNC (MTK_PIN_NO(6) | 5)
+
+#define MT2712_PIN_7_PWM3__FUNC_GPIO7 (MTK_PIN_NO(7) | 0)
+#define MT2712_PIN_7_PWM3__FUNC_PWM3 (MTK_PIN_NO(7) | 1)
+#define MT2712_PIN_7_PWM3__FUNC_DISP1_PWM (MTK_PIN_NO(7) | 2)
+#define MT2712_PIN_7_PWM3__FUNC_DISP0_PWM (MTK_PIN_NO(7) | 3)
+#define MT2712_PIN_7_PWM3__FUNC_LCM_RST2 (MTK_PIN_NO(7) | 4)
+#define MT2712_PIN_7_PWM3__FUNC_DIN_D0 (MTK_PIN_NO(7) | 5)
+
+#define MT2712_PIN_8_PWM4__FUNC_GPIO8 (MTK_PIN_NO(8) | 0)
+#define MT2712_PIN_8_PWM4__FUNC_PWM4 (MTK_PIN_NO(8) | 1)
+#define MT2712_PIN_8_PWM4__FUNC_DISP0_PWM (MTK_PIN_NO(8) | 2)
+#define MT2712_PIN_8_PWM4__FUNC_DISP1_PWM (MTK_PIN_NO(8) | 3)
+#define MT2712_PIN_8_PWM4__FUNC_DSIA_TE (MTK_PIN_NO(8) | 4)
+#define MT2712_PIN_8_PWM4__FUNC_DIN_D1 (MTK_PIN_NO(8) | 5)
+
+#define MT2712_PIN_9_PWM5__FUNC_GPIO9 (MTK_PIN_NO(9) | 0)
+#define MT2712_PIN_9_PWM5__FUNC_PWM5 (MTK_PIN_NO(9) | 1)
+#define MT2712_PIN_9_PWM5__FUNC_DISP1_PWM (MTK_PIN_NO(9) | 2)
+#define MT2712_PIN_9_PWM5__FUNC_DISP0_PWM (MTK_PIN_NO(9) | 3)
+#define MT2712_PIN_9_PWM5__FUNC_DSIB_TE (MTK_PIN_NO(9) | 4)
+#define MT2712_PIN_9_PWM5__FUNC_DIN_D2 (MTK_PIN_NO(9) | 5)
+
+#define MT2712_PIN_10_PWM6__FUNC_GPIO10 (MTK_PIN_NO(10) | 0)
+#define MT2712_PIN_10_PWM6__FUNC_PWM6 (MTK_PIN_NO(10) | 1)
+#define MT2712_PIN_10_PWM6__FUNC_DISP0_PWM (MTK_PIN_NO(10) | 2)
+#define MT2712_PIN_10_PWM6__FUNC_DISP1_PWM (MTK_PIN_NO(10) | 3)
+#define MT2712_PIN_10_PWM6__FUNC_LCM_RST0 (MTK_PIN_NO(10) | 4)
+
+#define MT2712_PIN_11_PWM7__FUNC_GPIO11 (MTK_PIN_NO(11) | 0)
+#define MT2712_PIN_11_PWM7__FUNC_PWM7 (MTK_PIN_NO(11) | 1)
+#define MT2712_PIN_11_PWM7__FUNC_DISP1_PWM (MTK_PIN_NO(11) | 2)
+#define MT2712_PIN_11_PWM7__FUNC_DISP0_PWM (MTK_PIN_NO(11) | 3)
+#define MT2712_PIN_11_PWM7__FUNC_LCM_RST1 (MTK_PIN_NO(11) | 4)
+
+#define MT2712_PIN_12_IDDIG_P0__FUNC_GPIO12 (MTK_PIN_NO(12) | 0)
+#define MT2712_PIN_12_IDDIG_P0__FUNC_IDDIG_A (MTK_PIN_NO(12) | 1)
+#define MT2712_PIN_12_IDDIG_P0__FUNC_DIN_D7 (MTK_PIN_NO(12) | 5)
+
+#define MT2712_PIN_13_DRV_VBUS_P0__FUNC_GPIO13 (MTK_PIN_NO(13) | 0)
+#define MT2712_PIN_13_DRV_VBUS_P0__FUNC_DRV_VBUS_A (MTK_PIN_NO(13) | 1)
+
+#define MT2712_PIN_14_IDDIG_P1__FUNC_GPIO14 (MTK_PIN_NO(14) | 0)
+#define MT2712_PIN_14_IDDIG_P1__FUNC_IDDIG_B (MTK_PIN_NO(14) | 1)
+
+#define MT2712_PIN_15_DRV_VBUS_P1__FUNC_GPIO15 (MTK_PIN_NO(15) | 0)
+#define MT2712_PIN_15_DRV_VBUS_P1__FUNC_DRV_VBUS_B (MTK_PIN_NO(15) | 1)
+
+#define MT2712_PIN_16_DRV_VBUS_P2__FUNC_GPIO16 (MTK_PIN_NO(16) | 0)
+#define MT2712_PIN_16_DRV_VBUS_P2__FUNC_DRV_VBUS_C (MTK_PIN_NO(16) | 1)
+
+#define MT2712_PIN_17_DRV_VBUS_P3__FUNC_GPIO17 (MTK_PIN_NO(17) | 0)
+#define MT2712_PIN_17_DRV_VBUS_P3__FUNC_DRV_VBUS_D (MTK_PIN_NO(17) | 1)
+
+#define MT2712_PIN_18_KPROW0__FUNC_GPIO18 (MTK_PIN_NO(18) | 0)
+#define MT2712_PIN_18_KPROW0__FUNC_KROW0 (MTK_PIN_NO(18) | 1)
+
+#define MT2712_PIN_19_KPCOL0__FUNC_GPIO19 (MTK_PIN_NO(19) | 0)
+#define MT2712_PIN_19_KPCOL0__FUNC_KCOL0 (MTK_PIN_NO(19) | 1)
+
+#define MT2712_PIN_20_KPROW1__FUNC_GPIO20 (MTK_PIN_NO(20) | 0)
+#define MT2712_PIN_20_KPROW1__FUNC_KROW1 (MTK_PIN_NO(20) | 1)
+
+#define MT2712_PIN_21_KPCOL1__FUNC_GPIO21 (MTK_PIN_NO(21) | 0)
+#define MT2712_PIN_21_KPCOL1__FUNC_KCOL1 (MTK_PIN_NO(21) | 1)
+
+#define MT2712_PIN_22_KPROW2__FUNC_GPIO22 (MTK_PIN_NO(22) | 0)
+#define MT2712_PIN_22_KPROW2__FUNC_KROW2 (MTK_PIN_NO(22) | 1)
+#define MT2712_PIN_22_KPROW2__FUNC_DISP1_PWM (MTK_PIN_NO(22) | 2)
+
+#define MT2712_PIN_23_KPCOL2__FUNC_GPIO23 (MTK_PIN_NO(23) | 0)
+#define MT2712_PIN_23_KPCOL2__FUNC_KCOL2 (MTK_PIN_NO(23) | 1)
+#define MT2712_PIN_23_KPCOL2__FUNC_DISP0_PWM (MTK_PIN_NO(23) | 2)
+
+#define MT2712_PIN_24_CMMCLK__FUNC_GPIO24 (MTK_PIN_NO(24) | 0)
+#define MT2712_PIN_24_CMMCLK__FUNC_CMMCLK (MTK_PIN_NO(24) | 1)
+#define MT2712_PIN_24_CMMCLK__FUNC_DBG_MON_A_1_ (MTK_PIN_NO(24) | 7)
+
+#define MT2712_PIN_25_CM2MCLK__FUNC_GPIO25 (MTK_PIN_NO(25) | 0)
+#define MT2712_PIN_25_CM2MCLK__FUNC_CM2MCLK (MTK_PIN_NO(25) | 1)
+#define MT2712_PIN_25_CM2MCLK__FUNC_DBG_MON_A_2_ (MTK_PIN_NO(25) | 7)
+
+#define MT2712_PIN_26_PCM_TX__FUNC_GPIO26 (MTK_PIN_NO(26) | 0)
+#define MT2712_PIN_26_PCM_TX__FUNC_PCM1_DO (MTK_PIN_NO(26) | 1)
+#define MT2712_PIN_26_PCM_TX__FUNC_MRG_TX (MTK_PIN_NO(26) | 2)
+#define MT2712_PIN_26_PCM_TX__FUNC_DAI_TX (MTK_PIN_NO(26) | 3)
+#define MT2712_PIN_26_PCM_TX__FUNC_MRG_RX (MTK_PIN_NO(26) | 4)
+#define MT2712_PIN_26_PCM_TX__FUNC_DAI_RX (MTK_PIN_NO(26) | 5)
+#define MT2712_PIN_26_PCM_TX__FUNC_PCM1_DI (MTK_PIN_NO(26) | 6)
+#define MT2712_PIN_26_PCM_TX__FUNC_DBG_MON_A_3_ (MTK_PIN_NO(26) | 7)
+
+#define MT2712_PIN_27_PCM_CLK__FUNC_GPIO27 (MTK_PIN_NO(27) | 0)
+#define MT2712_PIN_27_PCM_CLK__FUNC_PCM1_CLK (MTK_PIN_NO(27) | 1)
+#define MT2712_PIN_27_PCM_CLK__FUNC_MRG_CLK (MTK_PIN_NO(27) | 2)
+#define MT2712_PIN_27_PCM_CLK__FUNC_DAI_CLK (MTK_PIN_NO(27) | 3)
+#define MT2712_PIN_27_PCM_CLK__FUNC_DBG_MON_A_4_ (MTK_PIN_NO(27) | 7)
+
+#define MT2712_PIN_28_PCM_RX__FUNC_GPIO28 (MTK_PIN_NO(28) | 0)
+#define MT2712_PIN_28_PCM_RX__FUNC_PCM1_DI (MTK_PIN_NO(28) | 1)
+#define MT2712_PIN_28_PCM_RX__FUNC_MRG_RX (MTK_PIN_NO(28) | 2)
+#define MT2712_PIN_28_PCM_RX__FUNC_DAI_RX (MTK_PIN_NO(28) | 3)
+#define MT2712_PIN_28_PCM_RX__FUNC_MRG_TX (MTK_PIN_NO(28) | 4)
+#define MT2712_PIN_28_PCM_RX__FUNC_DAI_TX (MTK_PIN_NO(28) | 5)
+#define MT2712_PIN_28_PCM_RX__FUNC_PCM1_DO (MTK_PIN_NO(28) | 6)
+#define MT2712_PIN_28_PCM_RX__FUNC_DBG_MON_A_5_ (MTK_PIN_NO(28) | 7)
+
+#define MT2712_PIN_29_PCM_SYNC__FUNC_GPIO29 (MTK_PIN_NO(29) | 0)
+#define MT2712_PIN_29_PCM_SYNC__FUNC_PCM1_SYNC (MTK_PIN_NO(29) | 1)
+#define MT2712_PIN_29_PCM_SYNC__FUNC_MRG_SYNC (MTK_PIN_NO(29) | 2)
+#define MT2712_PIN_29_PCM_SYNC__FUNC_DAI_SYNC (MTK_PIN_NO(29) | 3)
+#define MT2712_PIN_29_PCM_SYNC__FUNC_DBG_MON_A_6_ (MTK_PIN_NO(29) | 7)
+
+#define MT2712_PIN_30_NCEB0__FUNC_GPIO30 (MTK_PIN_NO(30) | 0)
+#define MT2712_PIN_30_NCEB0__FUNC_NCEB0 (MTK_PIN_NO(30) | 1)
+#define MT2712_PIN_30_NCEB0__FUNC_USB0_FT_SDA (MTK_PIN_NO(30) | 2)
+#define MT2712_PIN_30_NCEB0__FUNC_DBG_MON_A_7_ (MTK_PIN_NO(30) | 7)
+
+#define MT2712_PIN_31_NCEB1__FUNC_GPIO31 (MTK_PIN_NO(31) | 0)
+#define MT2712_PIN_31_NCEB1__FUNC_NCEB1 (MTK_PIN_NO(31) | 1)
+#define MT2712_PIN_31_NCEB1__FUNC_USB1_FT_SCL (MTK_PIN_NO(31) | 2)
+#define MT2712_PIN_31_NCEB1__FUNC_DBG_MON_A_8_ (MTK_PIN_NO(31) | 7)
+
+#define MT2712_PIN_32_NF_DQS__FUNC_GPIO32 (MTK_PIN_NO(32) | 0)
+#define MT2712_PIN_32_NF_DQS__FUNC_NF_DQS (MTK_PIN_NO(32) | 1)
+#define MT2712_PIN_32_NF_DQS__FUNC_USB1_FT_SDA (MTK_PIN_NO(32) | 2)
+#define MT2712_PIN_32_NF_DQS__FUNC_DBG_MON_A_9_ (MTK_PIN_NO(32) | 7)
+
+#define MT2712_PIN_33_NWEB__FUNC_GPIO33 (MTK_PIN_NO(33) | 0)
+#define MT2712_PIN_33_NWEB__FUNC_NWEB (MTK_PIN_NO(33) | 1)
+#define MT2712_PIN_33_NWEB__FUNC_USB2_FT_SCL (MTK_PIN_NO(33) | 2)
+#define MT2712_PIN_33_NWEB__FUNC_DBG_MON_A_10_ (MTK_PIN_NO(33) | 7)
+
+#define MT2712_PIN_34_NREB__FUNC_GPIO34 (MTK_PIN_NO(34) | 0)
+#define MT2712_PIN_34_NREB__FUNC_NREB (MTK_PIN_NO(34) | 1)
+#define MT2712_PIN_34_NREB__FUNC_USB2_FT_SDA (MTK_PIN_NO(34) | 2)
+#define MT2712_PIN_34_NREB__FUNC_DBG_MON_A_11_ (MTK_PIN_NO(34) | 7)
+
+#define MT2712_PIN_35_NCLE__FUNC_GPIO35 (MTK_PIN_NO(35) | 0)
+#define MT2712_PIN_35_NCLE__FUNC_NCLE (MTK_PIN_NO(35) | 1)
+#define MT2712_PIN_35_NCLE__FUNC_USB3_FT_SCL (MTK_PIN_NO(35) | 2)
+#define MT2712_PIN_35_NCLE__FUNC_DBG_MON_A_12_ (MTK_PIN_NO(35) | 7)
+
+#define MT2712_PIN_36_NALE__FUNC_GPIO36 (MTK_PIN_NO(36) | 0)
+#define MT2712_PIN_36_NALE__FUNC_NALE (MTK_PIN_NO(36) | 1)
+#define MT2712_PIN_36_NALE__FUNC_USB3_FT_SDA (MTK_PIN_NO(36) | 2)
+#define MT2712_PIN_36_NALE__FUNC_DBG_MON_A_13_ (MTK_PIN_NO(36) | 7)
+
+#define MT2712_PIN_37_MSDC0E_CLK__FUNC_GPIO37 (MTK_PIN_NO(37) | 0)
+#define MT2712_PIN_37_MSDC0E_CLK__FUNC_MSDC0_CLK (MTK_PIN_NO(37) | 1)
+#define MT2712_PIN_37_MSDC0E_CLK__FUNC_USB0_FT_SCL (MTK_PIN_NO(37) | 2)
+#define MT2712_PIN_37_MSDC0E_CLK__FUNC_DBG_MON_A_0_ (MTK_PIN_NO(37) | 7)
+
+#define MT2712_PIN_38_MSDC0E_DAT7__FUNC_GPIO38 (MTK_PIN_NO(38) | 0)
+#define MT2712_PIN_38_MSDC0E_DAT7__FUNC_MSDC0_DAT7 (MTK_PIN_NO(38) | 1)
+#define MT2712_PIN_38_MSDC0E_DAT7__FUNC_NAND_ND7 (MTK_PIN_NO(38) | 2)
+#define MT2712_PIN_38_MSDC0E_DAT7__FUNC_DBG_MON_A_14_ (MTK_PIN_NO(38) | 7)
+
+#define MT2712_PIN_39_MSDC0E_DAT6__FUNC_GPIO39 (MTK_PIN_NO(39) | 0)
+#define MT2712_PIN_39_MSDC0E_DAT6__FUNC_MSDC0_DAT6 (MTK_PIN_NO(39) | 1)
+#define MT2712_PIN_39_MSDC0E_DAT6__FUNC_NAND_ND6 (MTK_PIN_NO(39) | 2)
+#define MT2712_PIN_39_MSDC0E_DAT6__FUNC_DBG_MON_A_15_ (MTK_PIN_NO(39) | 7)
+
+#define MT2712_PIN_40_MSDC0E_DAT5__FUNC_GPIO40 (MTK_PIN_NO(40) | 0)
+#define MT2712_PIN_40_MSDC0E_DAT5__FUNC_MSDC0_DAT5 (MTK_PIN_NO(40) | 1)
+#define MT2712_PIN_40_MSDC0E_DAT5__FUNC_NAND_ND5 (MTK_PIN_NO(40) | 2)
+#define MT2712_PIN_40_MSDC0E_DAT5__FUNC_DBG_MON_A_16_ (MTK_PIN_NO(40) | 7)
+
+#define MT2712_PIN_41_MSDC0E_DAT4__FUNC_GPIO41 (MTK_PIN_NO(41) | 0)
+#define MT2712_PIN_41_MSDC0E_DAT4__FUNC_MSDC0_DAT4 (MTK_PIN_NO(41) | 1)
+#define MT2712_PIN_41_MSDC0E_DAT4__FUNC_NAND_ND4 (MTK_PIN_NO(41) | 2)
+#define MT2712_PIN_41_MSDC0E_DAT4__FUNC_DBG_MON_A_17_ (MTK_PIN_NO(41) | 7)
+
+#define MT2712_PIN_42_MSDC0E_DAT3__FUNC_GPIO42 (MTK_PIN_NO(42) | 0)
+#define MT2712_PIN_42_MSDC0E_DAT3__FUNC_MSDC0_DAT3 (MTK_PIN_NO(42) | 1)
+#define MT2712_PIN_42_MSDC0E_DAT3__FUNC_NAND_ND3 (MTK_PIN_NO(42) | 2)
+#define MT2712_PIN_42_MSDC0E_DAT3__FUNC_DBG_MON_A_18_ (MTK_PIN_NO(42) | 7)
+
+#define MT2712_PIN_43_MSDC0E_DAT2__FUNC_GPIO43 (MTK_PIN_NO(43) | 0)
+#define MT2712_PIN_43_MSDC0E_DAT2__FUNC_MSDC0_DAT2 (MTK_PIN_NO(43) | 1)
+#define MT2712_PIN_43_MSDC0E_DAT2__FUNC_NAND_ND2 (MTK_PIN_NO(43) | 2)
+#define MT2712_PIN_43_MSDC0E_DAT2__FUNC_DBG_MON_A_19_ (MTK_PIN_NO(43) | 7)
+
+#define MT2712_PIN_44_MSDC0E_DAT1__FUNC_GPIO44 (MTK_PIN_NO(44) | 0)
+#define MT2712_PIN_44_MSDC0E_DAT1__FUNC_MSDC0_DAT1 (MTK_PIN_NO(44) | 1)
+#define MT2712_PIN_44_MSDC0E_DAT1__FUNC_NAND_ND1 (MTK_PIN_NO(44) | 2)
+#define MT2712_PIN_44_MSDC0E_DAT1__FUNC_DBG_MON_A_20_ (MTK_PIN_NO(44) | 7)
+
+#define MT2712_PIN_45_MSDC0E_DAT0__FUNC_GPIO45 (MTK_PIN_NO(45) | 0)
+#define MT2712_PIN_45_MSDC0E_DAT0__FUNC_MSDC0_DAT0 (MTK_PIN_NO(45) | 1)
+#define MT2712_PIN_45_MSDC0E_DAT0__FUNC_NAND_ND0 (MTK_PIN_NO(45) | 2)
+#define MT2712_PIN_45_MSDC0E_DAT0__FUNC_DBG_MON_A_21_ (MTK_PIN_NO(45) | 7)
+
+#define MT2712_PIN_46_MSDC0E_CMD__FUNC_GPIO46 (MTK_PIN_NO(46) | 0)
+#define MT2712_PIN_46_MSDC0E_CMD__FUNC_MSDC0_CMD (MTK_PIN_NO(46) | 1)
+#define MT2712_PIN_46_MSDC0E_CMD__FUNC_NAND_NRNB (MTK_PIN_NO(46) | 2)
+#define MT2712_PIN_46_MSDC0E_CMD__FUNC_DBG_MON_A_22_ (MTK_PIN_NO(46) | 7)
+
+#define MT2712_PIN_47_MSDC0E_DSL__FUNC_GPIO47 (MTK_PIN_NO(47) | 0)
+#define MT2712_PIN_47_MSDC0E_DSL__FUNC_MSDC0_DSL (MTK_PIN_NO(47) | 1)
+#define MT2712_PIN_47_MSDC0E_DSL__FUNC_DBG_MON_A_23_ (MTK_PIN_NO(47) | 7)
+
+#define MT2712_PIN_48_MSDC0E_RSTB__FUNC_GPIO48 (MTK_PIN_NO(48) | 0)
+#define MT2712_PIN_48_MSDC0E_RSTB__FUNC_MSDC0_RSTB (MTK_PIN_NO(48) | 1)
+#define MT2712_PIN_48_MSDC0E_RSTB__FUNC_DBG_MON_A_24_ (MTK_PIN_NO(48) | 7)
+
+#define MT2712_PIN_49_MSDC3_DAT3__FUNC_GPIO49 (MTK_PIN_NO(49) | 0)
+#define MT2712_PIN_49_MSDC3_DAT3__FUNC_MSDC3_DAT3 (MTK_PIN_NO(49) | 1)
+#define MT2712_PIN_49_MSDC3_DAT3__FUNC_DBG_MON_A_25_ (MTK_PIN_NO(49) | 7)
+
+#define MT2712_PIN_50_MSDC3_DAT2__FUNC_GPIO50 (MTK_PIN_NO(50) | 0)
+#define MT2712_PIN_50_MSDC3_DAT2__FUNC_MSDC3_DAT2 (MTK_PIN_NO(50) | 1)
+#define MT2712_PIN_50_MSDC3_DAT2__FUNC_DBG_MON_A_26_ (MTK_PIN_NO(50) | 7)
+
+#define MT2712_PIN_51_MSDC3_DAT1__FUNC_GPIO51 (MTK_PIN_NO(51) | 0)
+#define MT2712_PIN_51_MSDC3_DAT1__FUNC_MSDC3_DAT1 (MTK_PIN_NO(51) | 1)
+#define MT2712_PIN_51_MSDC3_DAT1__FUNC_DBG_MON_A_27_ (MTK_PIN_NO(51) | 7)
+
+#define MT2712_PIN_52_MSDC3_DAT0__FUNC_GPIO52 (MTK_PIN_NO(52) | 0)
+#define MT2712_PIN_52_MSDC3_DAT0__FUNC_MSDC3_DAT0 (MTK_PIN_NO(52) | 1)
+#define MT2712_PIN_52_MSDC3_DAT0__FUNC_DBG_MON_A_28_ (MTK_PIN_NO(52) | 7)
+
+#define MT2712_PIN_53_MSDC3_CMD__FUNC_GPIO53 (MTK_PIN_NO(53) | 0)
+#define MT2712_PIN_53_MSDC3_CMD__FUNC_MSDC3_CMD (MTK_PIN_NO(53) | 1)
+#define MT2712_PIN_53_MSDC3_CMD__FUNC_DBG_MON_A_29_ (MTK_PIN_NO(53) | 7)
+
+#define MT2712_PIN_54_MSDC3_INS__FUNC_GPIO54 (MTK_PIN_NO(54) | 0)
+#define MT2712_PIN_54_MSDC3_INS__FUNC_MSDC3_INS (MTK_PIN_NO(54) | 1)
+#define MT2712_PIN_54_MSDC3_INS__FUNC_DBG_MON_A_30_ (MTK_PIN_NO(54) | 7)
+
+#define MT2712_PIN_55_MSDC3_DSL__FUNC_GPIO55 (MTK_PIN_NO(55) | 0)
+#define MT2712_PIN_55_MSDC3_DSL__FUNC_MSDC3_DSL (MTK_PIN_NO(55) | 1)
+#define MT2712_PIN_55_MSDC3_DSL__FUNC_DBG_MON_A_31_ (MTK_PIN_NO(55) | 7)
+
+#define MT2712_PIN_56_MSDC3_CLK__FUNC_GPIO56 (MTK_PIN_NO(56) | 0)
+#define MT2712_PIN_56_MSDC3_CLK__FUNC_MSDC3_CLK (MTK_PIN_NO(56) | 1)
+#define MT2712_PIN_56_MSDC3_CLK__FUNC_DBG_MON_A_32_ (MTK_PIN_NO(56) | 7)
+
+#define MT2712_PIN_57_NOR_CS__FUNC_GPIO57 (MTK_PIN_NO(57) | 0)
+#define MT2712_PIN_57_NOR_CS__FUNC_NOR_CS (MTK_PIN_NO(57) | 1)
+
+#define MT2712_PIN_58_NOR_CK__FUNC_GPIO58 (MTK_PIN_NO(58) | 0)
+#define MT2712_PIN_58_NOR_CK__FUNC_NOR_CK (MTK_PIN_NO(58) | 1)
+
+#define MT2712_PIN_59_NOR_IO0__FUNC_GPIO59 (MTK_PIN_NO(59) | 0)
+#define MT2712_PIN_59_NOR_IO0__FUNC_NOR_IO0 (MTK_PIN_NO(59) | 1)
+
+#define MT2712_PIN_60_NOR_IO1__FUNC_GPIO60 (MTK_PIN_NO(60) | 0)
+#define MT2712_PIN_60_NOR_IO1__FUNC_NOR_IO1 (MTK_PIN_NO(60) | 1)
+
+#define MT2712_PIN_61_NOR_IO2__FUNC_GPIO61 (MTK_PIN_NO(61) | 0)
+#define MT2712_PIN_61_NOR_IO2__FUNC_NOR_IO2 (MTK_PIN_NO(61) | 1)
+
+#define MT2712_PIN_62_NOR_IO3__FUNC_GPIO62 (MTK_PIN_NO(62) | 0)
+#define MT2712_PIN_62_NOR_IO3__FUNC_NOR_IO3 (MTK_PIN_NO(62) | 1)
+
+#define MT2712_PIN_63_MSDC1_CLK__FUNC_GPIO63 (MTK_PIN_NO(63) | 0)
+#define MT2712_PIN_63_MSDC1_CLK__FUNC_MSDC1_CLK (MTK_PIN_NO(63) | 1)
+#define MT2712_PIN_63_MSDC1_CLK__FUNC_UDI_TCK (MTK_PIN_NO(63) | 2)
+
+#define MT2712_PIN_64_MSDC1_DAT3__FUNC_GPIO64 (MTK_PIN_NO(64) | 0)
+#define MT2712_PIN_64_MSDC1_DAT3__FUNC_MSDC1_DAT3 (MTK_PIN_NO(64) | 1)
+#define MT2712_PIN_64_MSDC1_DAT3__FUNC_UDI_TDI (MTK_PIN_NO(64) | 2)
+
+#define MT2712_PIN_65_MSDC1_DAT1__FUNC_GPIO65 (MTK_PIN_NO(65) | 0)
+#define MT2712_PIN_65_MSDC1_DAT1__FUNC_MSDC1_DAT1 (MTK_PIN_NO(65) | 1)
+#define MT2712_PIN_65_MSDC1_DAT1__FUNC_UDI_TMS (MTK_PIN_NO(65) | 2)
+
+#define MT2712_PIN_66_MSDC1_DAT2__FUNC_GPIO66 (MTK_PIN_NO(66) | 0)
+#define MT2712_PIN_66_MSDC1_DAT2__FUNC_MSDC1_DAT2 (MTK_PIN_NO(66) | 1)
+#define MT2712_PIN_66_MSDC1_DAT2__FUNC_UDI_TDO (MTK_PIN_NO(66) | 2)
+
+#define MT2712_PIN_67_MSDC1_PSW__FUNC_GPIO67 (MTK_PIN_NO(67) | 0)
+#define MT2712_PIN_67_MSDC1_PSW__FUNC_UDI_NTRST (MTK_PIN_NO(67) | 2)
+
+#define MT2712_PIN_68_MSDC1_DAT0__FUNC_GPIO68 (MTK_PIN_NO(68) | 0)
+#define MT2712_PIN_68_MSDC1_DAT0__FUNC_MSDC1_DAT0 (MTK_PIN_NO(68) | 1)
+
+#define MT2712_PIN_69_MSDC1_CMD__FUNC_GPIO69 (MTK_PIN_NO(69) | 0)
+#define MT2712_PIN_69_MSDC1_CMD__FUNC_MSDC1_CMD (MTK_PIN_NO(69) | 1)
+
+#define MT2712_PIN_70_MSDC1_INS__FUNC_GPIO70 (MTK_PIN_NO(70) | 0)
+
+#define MT2712_PIN_71_GBE_TXD3__FUNC_GPIO71 (MTK_PIN_NO(71) | 0)
+#define MT2712_PIN_71_GBE_TXD3__FUNC_GBE_TXD3 (MTK_PIN_NO(71) | 1)
+#define MT2712_PIN_71_GBE_TXD3__FUNC_DBG_MON_B_0_ (MTK_PIN_NO(71) | 7)
+
+#define MT2712_PIN_72_GBE_TXD2__FUNC_GPIO72 (MTK_PIN_NO(72) | 0)
+#define MT2712_PIN_72_GBE_TXD2__FUNC_GBE_TXD2 (MTK_PIN_NO(72) | 1)
+#define MT2712_PIN_72_GBE_TXD2__FUNC_DBG_MON_B_1_ (MTK_PIN_NO(72) | 7)
+
+#define MT2712_PIN_73_GBE_TXD1__FUNC_GPIO73 (MTK_PIN_NO(73) | 0)
+#define MT2712_PIN_73_GBE_TXD1__FUNC_GBE_TXD1 (MTK_PIN_NO(73) | 1)
+#define MT2712_PIN_73_GBE_TXD1__FUNC_DBG_MON_B_2_ (MTK_PIN_NO(73) | 7)
+
+#define MT2712_PIN_74_GBE_TXD0__FUNC_GPIO74 (MTK_PIN_NO(74) | 0)
+#define MT2712_PIN_74_GBE_TXD0__FUNC_GBE_TXD0 (MTK_PIN_NO(74) | 1)
+#define MT2712_PIN_74_GBE_TXD0__FUNC_DBG_MON_B_3_ (MTK_PIN_NO(74) | 7)
+
+#define MT2712_PIN_75_GBE_TXC__FUNC_GPIO75 (MTK_PIN_NO(75) | 0)
+#define MT2712_PIN_75_GBE_TXC__FUNC_GBE_TXC (MTK_PIN_NO(75) | 1)
+#define MT2712_PIN_75_GBE_TXC__FUNC_DBG_MON_B_4_ (MTK_PIN_NO(75) | 7)
+
+#define MT2712_PIN_76_GBE_TXEN__FUNC_GPIO76 (MTK_PIN_NO(76) | 0)
+#define MT2712_PIN_76_GBE_TXEN__FUNC_GBE_TXEN (MTK_PIN_NO(76) | 1)
+#define MT2712_PIN_76_GBE_TXEN__FUNC_DBG_MON_B_5_ (MTK_PIN_NO(76) | 7)
+
+#define MT2712_PIN_77_GBE_TXER__FUNC_GPIO77 (MTK_PIN_NO(77) | 0)
+#define MT2712_PIN_77_GBE_TXER__FUNC_GBE_TXER (MTK_PIN_NO(77) | 1)
+#define MT2712_PIN_77_GBE_TXER__FUNC_DBG_MON_B_6_ (MTK_PIN_NO(77) | 7)
+
+#define MT2712_PIN_78_GBE_RXD3__FUNC_GPIO78 (MTK_PIN_NO(78) | 0)
+#define MT2712_PIN_78_GBE_RXD3__FUNC_GBE_RXD3 (MTK_PIN_NO(78) | 1)
+#define MT2712_PIN_78_GBE_RXD3__FUNC_DBG_MON_B_7_ (MTK_PIN_NO(78) | 7)
+
+#define MT2712_PIN_79_GBE_RXD2__FUNC_GPIO79 (MTK_PIN_NO(79) | 0)
+#define MT2712_PIN_79_GBE_RXD2__FUNC_GBE_RXD2 (MTK_PIN_NO(79) | 1)
+#define MT2712_PIN_79_GBE_RXD2__FUNC_DBG_MON_B_8_ (MTK_PIN_NO(79) | 7)
+
+#define MT2712_PIN_80_GBE_RXD1__FUNC_GPIO80 (MTK_PIN_NO(80) | 0)
+#define MT2712_PIN_80_GBE_RXD1__FUNC_GBE_RXD1 (MTK_PIN_NO(80) | 1)
+#define MT2712_PIN_80_GBE_RXD1__FUNC_DBG_MON_B_9_ (MTK_PIN_NO(80) | 7)
+
+#define MT2712_PIN_81_GBE_RXD0__FUNC_GPIO81 (MTK_PIN_NO(81) | 0)
+#define MT2712_PIN_81_GBE_RXD0__FUNC_GBE_RXD0 (MTK_PIN_NO(81) | 1)
+#define MT2712_PIN_81_GBE_RXD0__FUNC_DBG_MON_B_10_ (MTK_PIN_NO(81) | 7)
+
+#define MT2712_PIN_82_GBE_RXDV__FUNC_GPIO82 (MTK_PIN_NO(82) | 0)
+#define MT2712_PIN_82_GBE_RXDV__FUNC_GBE_RXDV (MTK_PIN_NO(82) | 1)
+#define MT2712_PIN_82_GBE_RXDV__FUNC_DBG_MON_B_11_ (MTK_PIN_NO(82) | 7)
+
+#define MT2712_PIN_83_GBE_RXER__FUNC_GPIO83 (MTK_PIN_NO(83) | 0)
+#define MT2712_PIN_83_GBE_RXER__FUNC_GBE_RXER (MTK_PIN_NO(83) | 1)
+#define MT2712_PIN_83_GBE_RXER__FUNC_DBG_MON_B_12_ (MTK_PIN_NO(83) | 7)
+
+#define MT2712_PIN_84_GBE_RXC__FUNC_GPIO84 (MTK_PIN_NO(84) | 0)
+#define MT2712_PIN_84_GBE_RXC__FUNC_GBE_RXC (MTK_PIN_NO(84) | 1)
+#define MT2712_PIN_84_GBE_RXC__FUNC_DBG_MON_B_13_ (MTK_PIN_NO(84) | 7)
+
+#define MT2712_PIN_85_GBE_MDC__FUNC_GPIO85 (MTK_PIN_NO(85) | 0)
+#define MT2712_PIN_85_GBE_MDC__FUNC_GBE_MDC (MTK_PIN_NO(85) | 1)
+#define MT2712_PIN_85_GBE_MDC__FUNC_DBG_MON_B_14_ (MTK_PIN_NO(85) | 7)
+
+#define MT2712_PIN_86_GBE_MDIO__FUNC_GPIO86 (MTK_PIN_NO(86) | 0)
+#define MT2712_PIN_86_GBE_MDIO__FUNC_GBE_MDIO (MTK_PIN_NO(86) | 1)
+#define MT2712_PIN_86_GBE_MDIO__FUNC_DBG_MON_B_15_ (MTK_PIN_NO(86) | 7)
+
+#define MT2712_PIN_87_GBE_COL__FUNC_GPIO87 (MTK_PIN_NO(87) | 0)
+#define MT2712_PIN_87_GBE_COL__FUNC_GBE_COL (MTK_PIN_NO(87) | 1)
+#define MT2712_PIN_87_GBE_COL__FUNC_DBG_MON_B_16_ (MTK_PIN_NO(87) | 7)
+
+#define MT2712_PIN_88_GBE_INTR__FUNC_GPIO88 (MTK_PIN_NO(88) | 0)
+#define MT2712_PIN_88_GBE_INTR__FUNC_GBE_INTR (MTK_PIN_NO(88) | 1)
+#define MT2712_PIN_88_GBE_INTR__FUNC_GBE_CRS (MTK_PIN_NO(88) | 2)
+#define MT2712_PIN_88_GBE_INTR__FUNC_DBG_MON_B_17_ (MTK_PIN_NO(88) | 7)
+
+#define MT2712_PIN_89_MSDC2_CLK__FUNC_GPIO89 (MTK_PIN_NO(89) | 0)
+#define MT2712_PIN_89_MSDC2_CLK__FUNC_MSDC2_CLK (MTK_PIN_NO(89) | 1)
+#define MT2712_PIN_89_MSDC2_CLK__FUNC_DBG_MON_B_18_ (MTK_PIN_NO(89) | 7)
+
+#define MT2712_PIN_90_MSDC2_DAT3__FUNC_GPIO90 (MTK_PIN_NO(90) | 0)
+#define MT2712_PIN_90_MSDC2_DAT3__FUNC_MSDC2_DAT3 (MTK_PIN_NO(90) | 1)
+#define MT2712_PIN_90_MSDC2_DAT3__FUNC_DBG_MON_B_19_ (MTK_PIN_NO(90) | 7)
+
+#define MT2712_PIN_91_MSDC2_DAT2__FUNC_GPIO91 (MTK_PIN_NO(91) | 0)
+#define MT2712_PIN_91_MSDC2_DAT2__FUNC_MSDC2_DAT2 (MTK_PIN_NO(91) | 1)
+#define MT2712_PIN_91_MSDC2_DAT2__FUNC_DBG_MON_B_20_ (MTK_PIN_NO(91) | 7)
+
+#define MT2712_PIN_92_MSDC2_DAT1__FUNC_GPIO92 (MTK_PIN_NO(92) | 0)
+#define MT2712_PIN_92_MSDC2_DAT1__FUNC_MSDC2_DAT1 (MTK_PIN_NO(92) | 1)
+#define MT2712_PIN_92_MSDC2_DAT1__FUNC_DBG_MON_B_21_ (MTK_PIN_NO(92) | 7)
+
+#define MT2712_PIN_93_MSDC2_DAT0__FUNC_GPIO93 (MTK_PIN_NO(93) | 0)
+#define MT2712_PIN_93_MSDC2_DAT0__FUNC_MSDC2_DAT0 (MTK_PIN_NO(93) | 1)
+#define MT2712_PIN_93_MSDC2_DAT0__FUNC_DBG_MON_B_22_ (MTK_PIN_NO(93) | 7)
+
+#define MT2712_PIN_94_MSDC2_INS__FUNC_GPIO94 (MTK_PIN_NO(94) | 0)
+#define MT2712_PIN_94_MSDC2_INS__FUNC_DBG_MON_B_23_ (MTK_PIN_NO(94) | 7)
+
+#define MT2712_PIN_95_MSDC2_CMD__FUNC_GPIO95 (MTK_PIN_NO(95) | 0)
+#define MT2712_PIN_95_MSDC2_CMD__FUNC_MSDC2_CMD (MTK_PIN_NO(95) | 1)
+#define MT2712_PIN_95_MSDC2_CMD__FUNC_DBG_MON_B_24_ (MTK_PIN_NO(95) | 7)
+
+#define MT2712_PIN_96_MSDC2_PSW__FUNC_GPIO96 (MTK_PIN_NO(96) | 0)
+#define MT2712_PIN_96_MSDC2_PSW__FUNC_DBG_MON_B_25_ (MTK_PIN_NO(96) | 7)
+
+#define MT2712_PIN_97_URXD4__FUNC_GPIO97 (MTK_PIN_NO(97) | 0)
+#define MT2712_PIN_97_URXD4__FUNC_URXD4 (MTK_PIN_NO(97) | 1)
+#define MT2712_PIN_97_URXD4__FUNC_UTXD4 (MTK_PIN_NO(97) | 2)
+#define MT2712_PIN_97_URXD4__FUNC_MRG_CLK (MTK_PIN_NO(97) | 3)
+#define MT2712_PIN_97_URXD4__FUNC_PCM1_CLK (MTK_PIN_NO(97) | 4)
+#define MT2712_PIN_97_URXD4__FUNC_I2S_IQ2_SDQB (MTK_PIN_NO(97) | 5)
+#define MT2712_PIN_97_URXD4__FUNC_I2SO1_WS (MTK_PIN_NO(97) | 6)
+#define MT2712_PIN_97_URXD4__FUNC_DBG_MON_B_26_ (MTK_PIN_NO(97) | 7)
+
+#define MT2712_PIN_98_URTS4__FUNC_GPIO98 (MTK_PIN_NO(98) | 0)
+#define MT2712_PIN_98_URTS4__FUNC_URTS4 (MTK_PIN_NO(98) | 1)
+#define MT2712_PIN_98_URTS4__FUNC_UCTS4 (MTK_PIN_NO(98) | 2)
+#define MT2712_PIN_98_URTS4__FUNC_MRG_RX (MTK_PIN_NO(98) | 3)
+#define MT2712_PIN_98_URTS4__FUNC_PCM1_DI (MTK_PIN_NO(98) | 4)
+#define MT2712_PIN_98_URTS4__FUNC_I2S_IQ1_SDIB (MTK_PIN_NO(98) | 5)
+#define MT2712_PIN_98_URTS4__FUNC_I2SO1_MCK (MTK_PIN_NO(98) | 6)
+#define MT2712_PIN_98_URTS4__FUNC_DBG_MON_B_27_ (MTK_PIN_NO(98) | 7)
+
+#define MT2712_PIN_99_UTXD4__FUNC_GPIO99 (MTK_PIN_NO(99) | 0)
+#define MT2712_PIN_99_UTXD4__FUNC_UTXD4 (MTK_PIN_NO(99) | 1)
+#define MT2712_PIN_99_UTXD4__FUNC_URXD4 (MTK_PIN_NO(99) | 2)
+#define MT2712_PIN_99_UTXD4__FUNC_MRG_SYNC (MTK_PIN_NO(99) | 3)
+#define MT2712_PIN_99_UTXD4__FUNC_PCM1_SYNC (MTK_PIN_NO(99) | 4)
+#define MT2712_PIN_99_UTXD4__FUNC_I2S_IQ0_SDQB (MTK_PIN_NO(99) | 5)
+#define MT2712_PIN_99_UTXD4__FUNC_I2SO1_BCK (MTK_PIN_NO(99) | 6)
+#define MT2712_PIN_99_UTXD4__FUNC_DBG_MON_B_28_ (MTK_PIN_NO(99) | 7)
+
+#define MT2712_PIN_100_UCTS4__FUNC_GPIO100 (MTK_PIN_NO(100) | 0)
+#define MT2712_PIN_100_UCTS4__FUNC_UCTS4 (MTK_PIN_NO(100) | 1)
+#define MT2712_PIN_100_UCTS4__FUNC_URTS4 (MTK_PIN_NO(100) | 2)
+#define MT2712_PIN_100_UCTS4__FUNC_MRG_TX (MTK_PIN_NO(100) | 3)
+#define MT2712_PIN_100_UCTS4__FUNC_PCM1_DO (MTK_PIN_NO(100) | 4)
+#define MT2712_PIN_100_UCTS4__FUNC_I2S_IQ0_SDIB (MTK_PIN_NO(100) | 5)
+#define MT2712_PIN_100_UCTS4__FUNC_I2SO1_DO (MTK_PIN_NO(100) | 6)
+#define MT2712_PIN_100_UCTS4__FUNC_DBG_MON_B_29_ (MTK_PIN_NO(100) | 7)
+
+#define MT2712_PIN_101_URXD5__FUNC_GPIO101 (MTK_PIN_NO(101) | 0)
+#define MT2712_PIN_101_URXD5__FUNC_URXD5 (MTK_PIN_NO(101) | 1)
+#define MT2712_PIN_101_URXD5__FUNC_UTXD5 (MTK_PIN_NO(101) | 2)
+#define MT2712_PIN_101_URXD5__FUNC_I2SO3_WS (MTK_PIN_NO(101) | 3)
+#define MT2712_PIN_101_URXD5__FUNC_TDMIN_LRCK (MTK_PIN_NO(101) | 4)
+#define MT2712_PIN_101_URXD5__FUNC_I2SO0_WS (MTK_PIN_NO(101) | 6)
+#define MT2712_PIN_101_URXD5__FUNC_DBG_MON_B_30_ (MTK_PIN_NO(101) | 7)
+
+#define MT2712_PIN_102_URTS5__FUNC_GPIO102 (MTK_PIN_NO(102) | 0)
+#define MT2712_PIN_102_URTS5__FUNC_URTS5 (MTK_PIN_NO(102) | 1)
+#define MT2712_PIN_102_URTS5__FUNC_UCTS5 (MTK_PIN_NO(102) | 2)
+#define MT2712_PIN_102_URTS5__FUNC_I2SO3_MCK (MTK_PIN_NO(102) | 3)
+#define MT2712_PIN_102_URTS5__FUNC_TDMIN_MCLK (MTK_PIN_NO(102) | 4)
+#define MT2712_PIN_102_URTS5__FUNC_IR_IN (MTK_PIN_NO(102) | 5)
+#define MT2712_PIN_102_URTS5__FUNC_I2SO0_MCK (MTK_PIN_NO(102) | 6)
+#define MT2712_PIN_102_URTS5__FUNC_DBG_MON_B_31_ (MTK_PIN_NO(102) | 7)
+
+#define MT2712_PIN_103_UTXD5__FUNC_GPIO103 (MTK_PIN_NO(103) | 0)
+#define MT2712_PIN_103_UTXD5__FUNC_UTXD5 (MTK_PIN_NO(103) | 1)
+#define MT2712_PIN_103_UTXD5__FUNC_URXD5 (MTK_PIN_NO(103) | 2)
+#define MT2712_PIN_103_UTXD5__FUNC_I2SO3_BCK (MTK_PIN_NO(103) | 3)
+#define MT2712_PIN_103_UTXD5__FUNC_TDMIN_BCK (MTK_PIN_NO(103) | 4)
+#define MT2712_PIN_103_UTXD5__FUNC_I2SO0_BCK (MTK_PIN_NO(103) | 6)
+#define MT2712_PIN_103_UTXD5__FUNC_DBG_MON_B_32_ (MTK_PIN_NO(103) | 7)
+
+#define MT2712_PIN_104_UCTS5__FUNC_GPIO104 (MTK_PIN_NO(104) | 0)
+#define MT2712_PIN_104_UCTS5__FUNC_UCTS5 (MTK_PIN_NO(104) | 1)
+#define MT2712_PIN_104_UCTS5__FUNC_URTS5 (MTK_PIN_NO(104) | 2)
+#define MT2712_PIN_104_UCTS5__FUNC_I2SO0_DO1 (MTK_PIN_NO(104) | 3)
+#define MT2712_PIN_104_UCTS5__FUNC_TDMIN_DI (MTK_PIN_NO(104) | 4)
+#define MT2712_PIN_104_UCTS5__FUNC_IR_IN (MTK_PIN_NO(104) | 5)
+#define MT2712_PIN_104_UCTS5__FUNC_I2SO0_DO0 (MTK_PIN_NO(104) | 6)
+
+#define MT2712_PIN_105_I2C_SDA0__FUNC_GPIO105 (MTK_PIN_NO(105) | 0)
+#define MT2712_PIN_105_I2C_SDA0__FUNC_SDA0 (MTK_PIN_NO(105) | 1)
+
+#define MT2712_PIN_106_I2C_SDA1__FUNC_GPIO106 (MTK_PIN_NO(106) | 0)
+#define MT2712_PIN_106_I2C_SDA1__FUNC_SDA1 (MTK_PIN_NO(106) | 1)
+
+#define MT2712_PIN_107_I2C_SDA2__FUNC_GPIO107 (MTK_PIN_NO(107) | 0)
+#define MT2712_PIN_107_I2C_SDA2__FUNC_SDA2 (MTK_PIN_NO(107) | 1)
+
+#define MT2712_PIN_108_I2C_SDA3__FUNC_GPIO108 (MTK_PIN_NO(108) | 0)
+#define MT2712_PIN_108_I2C_SDA3__FUNC_SDA3 (MTK_PIN_NO(108) | 1)
+
+#define MT2712_PIN_109_I2C_SDA4__FUNC_GPIO109 (MTK_PIN_NO(109) | 0)
+#define MT2712_PIN_109_I2C_SDA4__FUNC_SDA4 (MTK_PIN_NO(109) | 1)
+
+#define MT2712_PIN_110_I2C_SDA5__FUNC_GPIO110 (MTK_PIN_NO(110) | 0)
+#define MT2712_PIN_110_I2C_SDA5__FUNC_SDA5 (MTK_PIN_NO(110) | 1)
+
+#define MT2712_PIN_111_I2C_SCL0__FUNC_GPIO111 (MTK_PIN_NO(111) | 0)
+#define MT2712_PIN_111_I2C_SCL0__FUNC_SCL0 (MTK_PIN_NO(111) | 1)
+
+#define MT2712_PIN_112_I2C_SCL1__FUNC_GPIO112 (MTK_PIN_NO(112) | 0)
+#define MT2712_PIN_112_I2C_SCL1__FUNC_SCL1 (MTK_PIN_NO(112) | 1)
+
+#define MT2712_PIN_113_I2C_SCL2__FUNC_GPIO113 (MTK_PIN_NO(113) | 0)
+#define MT2712_PIN_113_I2C_SCL2__FUNC_SCL2 (MTK_PIN_NO(113) | 1)
+
+#define MT2712_PIN_114_I2C_SCL3__FUNC_GPIO114 (MTK_PIN_NO(114) | 0)
+#define MT2712_PIN_114_I2C_SCL3__FUNC_SCL3 (MTK_PIN_NO(114) | 1)
+
+#define MT2712_PIN_115_I2C_SCL4__FUNC_GPIO115 (MTK_PIN_NO(115) | 0)
+#define MT2712_PIN_115_I2C_SCL4__FUNC_SCL4 (MTK_PIN_NO(115) | 1)
+
+#define MT2712_PIN_116_I2C_SCL5__FUNC_GPIO116 (MTK_PIN_NO(116) | 0)
+#define MT2712_PIN_116_I2C_SCL5__FUNC_SCL5 (MTK_PIN_NO(116) | 1)
+
+#define MT2712_PIN_117_URXD0__FUNC_GPIO117 (MTK_PIN_NO(117) | 0)
+#define MT2712_PIN_117_URXD0__FUNC_URXD0 (MTK_PIN_NO(117) | 1)
+#define MT2712_PIN_117_URXD0__FUNC_UTXD0 (MTK_PIN_NO(117) | 2)
+
+#define MT2712_PIN_118_URXD1__FUNC_GPIO118 (MTK_PIN_NO(118) | 0)
+#define MT2712_PIN_118_URXD1__FUNC_URXD1 (MTK_PIN_NO(118) | 1)
+#define MT2712_PIN_118_URXD1__FUNC_UTXD1 (MTK_PIN_NO(118) | 2)
+
+#define MT2712_PIN_119_URXD2__FUNC_GPIO119 (MTK_PIN_NO(119) | 0)
+#define MT2712_PIN_119_URXD2__FUNC_URXD2 (MTK_PIN_NO(119) | 1)
+#define MT2712_PIN_119_URXD2__FUNC_UTXD2 (MTK_PIN_NO(119) | 2)
+
+#define MT2712_PIN_120_UTXD0__FUNC_GPIO120 (MTK_PIN_NO(120) | 0)
+#define MT2712_PIN_120_UTXD0__FUNC_UTXD0 (MTK_PIN_NO(120) | 1)
+#define MT2712_PIN_120_UTXD0__FUNC_URXD0 (MTK_PIN_NO(120) | 2)
+
+#define MT2712_PIN_121_UTXD1__FUNC_GPIO121 (MTK_PIN_NO(121) | 0)
+#define MT2712_PIN_121_UTXD1__FUNC_UTXD1 (MTK_PIN_NO(121) | 1)
+#define MT2712_PIN_121_UTXD1__FUNC_URXD1 (MTK_PIN_NO(121) | 2)
+
+#define MT2712_PIN_122_UTXD2__FUNC_GPIO122 (MTK_PIN_NO(122) | 0)
+#define MT2712_PIN_122_UTXD2__FUNC_UTXD2 (MTK_PIN_NO(122) | 1)
+#define MT2712_PIN_122_UTXD2__FUNC_URXD2 (MTK_PIN_NO(122) | 2)
+
+#define MT2712_PIN_123_URXD3__FUNC_GPIO123 (MTK_PIN_NO(123) | 0)
+#define MT2712_PIN_123_URXD3__FUNC_URXD3 (MTK_PIN_NO(123) | 1)
+#define MT2712_PIN_123_URXD3__FUNC_UTXD3 (MTK_PIN_NO(123) | 2)
+#define MT2712_PIN_123_URXD3__FUNC_PURE_HW_PROTECT (MTK_PIN_NO(123) | 3)
+
+#define MT2712_PIN_124_UTXD3__FUNC_GPIO124 (MTK_PIN_NO(124) | 0)
+#define MT2712_PIN_124_UTXD3__FUNC_UTXD3 (MTK_PIN_NO(124) | 1)
+#define MT2712_PIN_124_UTXD3__FUNC_URXD3 (MTK_PIN_NO(124) | 2)
+#define MT2712_PIN_124_UTXD3__FUNC_PURE_HW_PROTECT (MTK_PIN_NO(124) | 3)
+
+#define MT2712_PIN_125_URTS3__FUNC_GPIO125 (MTK_PIN_NO(125) | 0)
+#define MT2712_PIN_125_URTS3__FUNC_URTS3 (MTK_PIN_NO(125) | 1)
+#define MT2712_PIN_125_URTS3__FUNC_UCTS3 (MTK_PIN_NO(125) | 2)
+#define MT2712_PIN_125_URTS3__FUNC_WATCH_DOG (MTK_PIN_NO(125) | 3)
+
+#define MT2712_PIN_126_UCTS3__FUNC_GPIO126 (MTK_PIN_NO(126) | 0)
+#define MT2712_PIN_126_UCTS3__FUNC_UCTS3 (MTK_PIN_NO(126) | 1)
+#define MT2712_PIN_126_UCTS3__FUNC_URTS3 (MTK_PIN_NO(126) | 2)
+#define MT2712_PIN_126_UCTS3__FUNC_SRCLKENA0 (MTK_PIN_NO(126) | 3)
+
+#define MT2712_PIN_127_SPI2_CSN__FUNC_GPIO127 (MTK_PIN_NO(127) | 0)
+#define MT2712_PIN_127_SPI2_CSN__FUNC_SPI_CS_2_ (MTK_PIN_NO(127) | 1)
+#define MT2712_PIN_127_SPI2_CSN__FUNC_SPI_CS_1_ (MTK_PIN_NO(127) | 2)
+
+#define MT2712_PIN_128_SPI2_MO__FUNC_GPIO128 (MTK_PIN_NO(128) | 0)
+#define MT2712_PIN_128_SPI2_MO__FUNC_SPI_MO_2_ (MTK_PIN_NO(128) | 1)
+#define MT2712_PIN_128_SPI2_MO__FUNC_SPI_SO_1_ (MTK_PIN_NO(128) | 2)
+
+#define MT2712_PIN_129_SPI2_MI__FUNC_GPIO129 (MTK_PIN_NO(129) | 0)
+#define MT2712_PIN_129_SPI2_MI__FUNC_SPI_MI_2_ (MTK_PIN_NO(129) | 1)
+#define MT2712_PIN_129_SPI2_MI__FUNC_SPI_SI_1_ (MTK_PIN_NO(129) | 2)
+
+#define MT2712_PIN_130_SPI2_CK__FUNC_GPIO130 (MTK_PIN_NO(130) | 0)
+#define MT2712_PIN_130_SPI2_CK__FUNC_SPI_CK_2_ (MTK_PIN_NO(130) | 1)
+#define MT2712_PIN_130_SPI2_CK__FUNC_SPI_CK_1_ (MTK_PIN_NO(130) | 2)
+
+#define MT2712_PIN_131_SPI3_CSN__FUNC_GPIO131 (MTK_PIN_NO(131) | 0)
+#define MT2712_PIN_131_SPI3_CSN__FUNC_SPI_CS_3_ (MTK_PIN_NO(131) | 1)
+
+#define MT2712_PIN_132_SPI3_MO__FUNC_GPIO132 (MTK_PIN_NO(132) | 0)
+#define MT2712_PIN_132_SPI3_MO__FUNC_SPI_MO_3_ (MTK_PIN_NO(132) | 1)
+
+#define MT2712_PIN_133_SPI3_MI__FUNC_GPIO133 (MTK_PIN_NO(133) | 0)
+#define MT2712_PIN_133_SPI3_MI__FUNC_SPI_MI_3_ (MTK_PIN_NO(133) | 1)
+
+#define MT2712_PIN_134_SPI3_CK__FUNC_GPIO134 (MTK_PIN_NO(134) | 0)
+#define MT2712_PIN_134_SPI3_CK__FUNC_SPI_CK_3_ (MTK_PIN_NO(134) | 1)
+
+#define MT2712_PIN_135_KPROW3__FUNC_GPIO135 (MTK_PIN_NO(135) | 0)
+#define MT2712_PIN_135_KPROW3__FUNC_KROW3 (MTK_PIN_NO(135) | 1)
+#define MT2712_PIN_135_KPROW3__FUNC_DSIC_TE (MTK_PIN_NO(135) | 2)
+
+#define MT2712_PIN_136_KPROW4__FUNC_GPIO136 (MTK_PIN_NO(136) | 0)
+#define MT2712_PIN_136_KPROW4__FUNC_KROW4 (MTK_PIN_NO(136) | 1)
+#define MT2712_PIN_136_KPROW4__FUNC_DSID_TE (MTK_PIN_NO(136) | 2)
+
+#define MT2712_PIN_137_KPCOL3__FUNC_GPIO137 (MTK_PIN_NO(137) | 0)
+#define MT2712_PIN_137_KPCOL3__FUNC_KCOL3 (MTK_PIN_NO(137) | 1)
+#define MT2712_PIN_137_KPCOL3__FUNC_DISP2_PWM (MTK_PIN_NO(137) | 2)
+
+#define MT2712_PIN_138_KPCOL4__FUNC_GPIO138 (MTK_PIN_NO(138) | 0)
+#define MT2712_PIN_138_KPCOL4__FUNC_KCOL4 (MTK_PIN_NO(138) | 1)
+#define MT2712_PIN_138_KPCOL4__FUNC_LCM_RST2 (MTK_PIN_NO(138) | 2)
+
+#define MT2712_PIN_139_KPCOL5__FUNC_GPIO139 (MTK_PIN_NO(139) | 0)
+#define MT2712_PIN_139_KPCOL5__FUNC_KCOL5 (MTK_PIN_NO(139) | 1)
+#define MT2712_PIN_139_KPCOL5__FUNC_DSIA_TE (MTK_PIN_NO(139) | 3)
+#define MT2712_PIN_139_KPCOL5__FUNC_PURE_HW_PROTECT (MTK_PIN_NO(139) | 4)
+
+#define MT2712_PIN_140_KPCOL6__FUNC_GPIO140 (MTK_PIN_NO(140) | 0)
+#define MT2712_PIN_140_KPCOL6__FUNC_KCOL6 (MTK_PIN_NO(140) | 1)
+#define MT2712_PIN_140_KPCOL6__FUNC_WATCH_DOG (MTK_PIN_NO(140) | 2)
+#define MT2712_PIN_140_KPCOL6__FUNC_LCM_RST1 (MTK_PIN_NO(140) | 3)
+
+#define MT2712_PIN_141_KPROW5__FUNC_GPIO141 (MTK_PIN_NO(141) | 0)
+#define MT2712_PIN_141_KPROW5__FUNC_KROW5 (MTK_PIN_NO(141) | 1)
+#define MT2712_PIN_141_KPROW5__FUNC_LCM_RST0 (MTK_PIN_NO(141) | 3)
+#define MT2712_PIN_141_KPROW5__FUNC_PURE_HW_PROTECT (MTK_PIN_NO(141) | 4)
+
+#define MT2712_PIN_142_KPROW6__FUNC_GPIO142 (MTK_PIN_NO(142) | 0)
+#define MT2712_PIN_142_KPROW6__FUNC_KROW6 (MTK_PIN_NO(142) | 1)
+#define MT2712_PIN_142_KPROW6__FUNC_SRCLKENA0 (MTK_PIN_NO(142) | 2)
+#define MT2712_PIN_142_KPROW6__FUNC_DSIB_TE (MTK_PIN_NO(142) | 3)
+
+#define MT2712_PIN_143_JTDO_ICE__FUNC_GPIO143 (MTK_PIN_NO(143) | 0)
+#define MT2712_PIN_143_JTDO_ICE__FUNC_JTDO_ICE (MTK_PIN_NO(143) | 1)
+#define MT2712_PIN_143_JTDO_ICE__FUNC_DFD_TDO (MTK_PIN_NO(143) | 3)
+
+#define MT2712_PIN_144_JTCK_ICE__FUNC_GPIO144 (MTK_PIN_NO(144) | 0)
+#define MT2712_PIN_144_JTCK_ICE__FUNC_JTCK_ICE (MTK_PIN_NO(144) | 1)
+#define MT2712_PIN_144_JTCK_ICE__FUNC_DFD_TCK (MTK_PIN_NO(144) | 3)
+
+#define MT2712_PIN_145_JTDI_ICE__FUNC_GPIO145 (MTK_PIN_NO(145) | 0)
+#define MT2712_PIN_145_JTDI_ICE__FUNC_JTDI_ICE (MTK_PIN_NO(145) | 1)
+#define MT2712_PIN_145_JTDI_ICE__FUNC_DFD_TDI (MTK_PIN_NO(145) | 3)
+
+#define MT2712_PIN_146_JTMS_ICE__FUNC_GPIO146 (MTK_PIN_NO(146) | 0)
+#define MT2712_PIN_146_JTMS_ICE__FUNC_JTMS_ICE (MTK_PIN_NO(146) | 1)
+#define MT2712_PIN_146_JTMS_ICE__FUNC_DFD_TMS (MTK_PIN_NO(146) | 3)
+
+#define MT2712_PIN_147_JTRSTB_ICE__FUNC_GPIO147 (MTK_PIN_NO(147) | 0)
+#define MT2712_PIN_147_JTRSTB_ICE__FUNC_JTRST_B_ICE (MTK_PIN_NO(147) | 1)
+#define MT2712_PIN_147_JTRSTB_ICE__FUNC_DFD_NTRST (MTK_PIN_NO(147) | 3)
+
+#define MT2712_PIN_148_GPIO148__FUNC_GPIO148 (MTK_PIN_NO(148) | 0)
+#define MT2712_PIN_148_GPIO148__FUNC_JTRSTB_CM4 (MTK_PIN_NO(148) | 1)
+#define MT2712_PIN_148_GPIO148__FUNC_DFD_NTRST (MTK_PIN_NO(148) | 3)
+
+#define MT2712_PIN_149_GPIO149__FUNC_GPIO149 (MTK_PIN_NO(149) | 0)
+#define MT2712_PIN_149_GPIO149__FUNC_JTCK_CM4 (MTK_PIN_NO(149) | 1)
+#define MT2712_PIN_149_GPIO149__FUNC_DFD_TCK (MTK_PIN_NO(149) | 3)
+
+#define MT2712_PIN_150_GPIO150__FUNC_GPIO150 (MTK_PIN_NO(150) | 0)
+#define MT2712_PIN_150_GPIO150__FUNC_JTMS_CM4 (MTK_PIN_NO(150) | 1)
+#define MT2712_PIN_150_GPIO150__FUNC_DFD_TMS (MTK_PIN_NO(150) | 3)
+
+#define MT2712_PIN_151_GPIO151__FUNC_GPIO151 (MTK_PIN_NO(151) | 0)
+#define MT2712_PIN_151_GPIO151__FUNC_JTDI_CM4 (MTK_PIN_NO(151) | 1)
+#define MT2712_PIN_151_GPIO151__FUNC_DFD_TDI (MTK_PIN_NO(151) | 3)
+
+#define MT2712_PIN_152_GPIO152__FUNC_GPIO152 (MTK_PIN_NO(152) | 0)
+#define MT2712_PIN_152_GPIO152__FUNC_JTDO_CM4 (MTK_PIN_NO(152) | 1)
+#define MT2712_PIN_152_GPIO152__FUNC_DFD_TDO (MTK_PIN_NO(152) | 3)
+
+#define MT2712_PIN_153_SPI0_CSN__FUNC_GPIO153 (MTK_PIN_NO(153) | 0)
+#define MT2712_PIN_153_SPI0_CSN__FUNC_SPI_CS_0_ (MTK_PIN_NO(153) | 1)
+#define MT2712_PIN_153_SPI0_CSN__FUNC_SRCLKENA0 (MTK_PIN_NO(153) | 2)
+#define MT2712_PIN_153_SPI0_CSN__FUNC_UTXD0 (MTK_PIN_NO(153) | 3)
+#define MT2712_PIN_153_SPI0_CSN__FUNC_I2SO0_DO1 (MTK_PIN_NO(153) | 4)
+#define MT2712_PIN_153_SPI0_CSN__FUNC_TDMO0_DATA1 (MTK_PIN_NO(153) | 6)
+#define MT2712_PIN_153_SPI0_CSN__FUNC_I2S_IQ2_SDQB (MTK_PIN_NO(153) | 7)
+
+#define MT2712_PIN_154_SPI0_MI__FUNC_GPIO154 (MTK_PIN_NO(154) | 0)
+#define MT2712_PIN_154_SPI0_MI__FUNC_SPI_MI_0_ (MTK_PIN_NO(154) | 1)
+#define MT2712_PIN_154_SPI0_MI__FUNC_SRCLKENA0 (MTK_PIN_NO(154) | 2)
+#define MT2712_PIN_154_SPI0_MI__FUNC_URXD0 (MTK_PIN_NO(154) | 3)
+#define MT2712_PIN_154_SPI0_MI__FUNC_I2SO0_DO0 (MTK_PIN_NO(154) | 4)
+#define MT2712_PIN_154_SPI0_MI__FUNC_I2SO1_DO (MTK_PIN_NO(154) | 5)
+#define MT2712_PIN_154_SPI0_MI__FUNC_TDMO0_DATA (MTK_PIN_NO(154) | 6)
+#define MT2712_PIN_154_SPI0_MI__FUNC_I2S_IQ1_SDIB (MTK_PIN_NO(154) | 7)
+
+#define MT2712_PIN_155_SPI0_CK__FUNC_GPIO155 (MTK_PIN_NO(155) | 0)
+#define MT2712_PIN_155_SPI0_CK__FUNC_SPI_CK_0_ (MTK_PIN_NO(155) | 1)
+#define MT2712_PIN_155_SPI0_CK__FUNC_SC_APBIAS_OFF (MTK_PIN_NO(155) | 2)
+#define MT2712_PIN_155_SPI0_CK__FUNC_UTXD1 (MTK_PIN_NO(155) | 3)
+#define MT2712_PIN_155_SPI0_CK__FUNC_I2SO0_BCK (MTK_PIN_NO(155) | 4)
+#define MT2712_PIN_155_SPI0_CK__FUNC_I2SO1_BCK (MTK_PIN_NO(155) | 5)
+#define MT2712_PIN_155_SPI0_CK__FUNC_TDMO0_BCK (MTK_PIN_NO(155) | 6)
+#define MT2712_PIN_155_SPI0_CK__FUNC_I2S_IQ0_SDQB (MTK_PIN_NO(155) | 7)
+
+#define MT2712_PIN_156_SPI0_MO__FUNC_GPIO156 (MTK_PIN_NO(156) | 0)
+#define MT2712_PIN_156_SPI0_MO__FUNC_SPI_MO_0_ (MTK_PIN_NO(156) | 1)
+#define MT2712_PIN_156_SPI0_MO__FUNC_SC_APBIAS_OFF (MTK_PIN_NO(156) | 2)
+#define MT2712_PIN_156_SPI0_MO__FUNC_URXD1 (MTK_PIN_NO(156) | 3)
+#define MT2712_PIN_156_SPI0_MO__FUNC_I2SO0_WS (MTK_PIN_NO(156) | 4)
+#define MT2712_PIN_156_SPI0_MO__FUNC_I2SO1_WS (MTK_PIN_NO(156) | 5)
+#define MT2712_PIN_156_SPI0_MO__FUNC_TDMO0_LRCK (MTK_PIN_NO(156) | 6)
+#define MT2712_PIN_156_SPI0_MO__FUNC_I2S_IQ0_SDIB (MTK_PIN_NO(156) | 7)
+
+#define MT2712_PIN_157_SPI5_CSN__FUNC_GPIO157 (MTK_PIN_NO(157) | 0)
+#define MT2712_PIN_157_SPI5_CSN__FUNC_SPI_CS_5_ (MTK_PIN_NO(157) | 1)
+#define MT2712_PIN_157_SPI5_CSN__FUNC_LCM_RST0 (MTK_PIN_NO(157) | 2)
+#define MT2712_PIN_157_SPI5_CSN__FUNC_UTXD2 (MTK_PIN_NO(157) | 3)
+#define MT2712_PIN_157_SPI5_CSN__FUNC_I2SO0_MCK (MTK_PIN_NO(157) | 4)
+#define MT2712_PIN_157_SPI5_CSN__FUNC_I2SO1_MCK (MTK_PIN_NO(157) | 5)
+#define MT2712_PIN_157_SPI5_CSN__FUNC_TDMO0_MCLK (MTK_PIN_NO(157) | 6)
+
+#define MT2712_PIN_158_SPI5_MI__FUNC_GPIO158 (MTK_PIN_NO(158) | 0)
+#define MT2712_PIN_158_SPI5_MI__FUNC_SPI_MI_5_ (MTK_PIN_NO(158) | 1)
+#define MT2712_PIN_158_SPI5_MI__FUNC_DSIA_TE (MTK_PIN_NO(158) | 2)
+#define MT2712_PIN_158_SPI5_MI__FUNC_URXD2 (MTK_PIN_NO(158) | 3)
+
+#define MT2712_PIN_159_SPI5_MO__FUNC_GPIO159 (MTK_PIN_NO(159) | 0)
+#define MT2712_PIN_159_SPI5_MO__FUNC_SPI_MO_5_ (MTK_PIN_NO(159) | 1)
+#define MT2712_PIN_159_SPI5_MO__FUNC_DSIB_TE (MTK_PIN_NO(159) | 2)
+#define MT2712_PIN_159_SPI5_MO__FUNC_UTXD3 (MTK_PIN_NO(159) | 3)
+
+#define MT2712_PIN_160_SPI5_CK__FUNC_GPIO160 (MTK_PIN_NO(160) | 0)
+#define MT2712_PIN_160_SPI5_CK__FUNC_SPI_CK_5_ (MTK_PIN_NO(160) | 1)
+#define MT2712_PIN_160_SPI5_CK__FUNC_LCM_RST1 (MTK_PIN_NO(160) | 2)
+#define MT2712_PIN_160_SPI5_CK__FUNC_URXD3 (MTK_PIN_NO(160) | 3)
+
+#define MT2712_PIN_161_SPI1_CSN__FUNC_GPIO161 (MTK_PIN_NO(161) | 0)
+#define MT2712_PIN_161_SPI1_CSN__FUNC_SPI_CS_1_ (MTK_PIN_NO(161) | 1)
+#define MT2712_PIN_161_SPI1_CSN__FUNC_SPI_CS_4_ (MTK_PIN_NO(161) | 2)
+#define MT2712_PIN_161_SPI1_CSN__FUNC_I2S_IQ2_SDQB (MTK_PIN_NO(161) | 4)
+#define MT2712_PIN_161_SPI1_CSN__FUNC_I2SO2_DO (MTK_PIN_NO(161) | 5)
+#define MT2712_PIN_161_SPI1_CSN__FUNC_TDMO0_DATA1 (MTK_PIN_NO(161) | 6)
+#define MT2712_PIN_161_SPI1_CSN__FUNC_I2SO0_DO1 (MTK_PIN_NO(161) | 7)
+
+#define MT2712_PIN_162_SPI1_SI__FUNC_GPIO162 (MTK_PIN_NO(162) | 0)
+#define MT2712_PIN_162_SPI1_SI__FUNC_SPI_SI_1_ (MTK_PIN_NO(162) | 1)
+#define MT2712_PIN_162_SPI1_SI__FUNC_SPI_MI_4_ (MTK_PIN_NO(162) | 2)
+#define MT2712_PIN_162_SPI1_SI__FUNC_I2S_IQ1_SDIB (MTK_PIN_NO(162) | 4)
+#define MT2712_PIN_162_SPI1_SI__FUNC_I2SO2_BCK (MTK_PIN_NO(162) | 5)
+#define MT2712_PIN_162_SPI1_SI__FUNC_TDMO0_DATA (MTK_PIN_NO(162) | 6)
+#define MT2712_PIN_162_SPI1_SI__FUNC_I2SO0_DO0 (MTK_PIN_NO(162) | 7)
+
+#define MT2712_PIN_163_SPI1_CK__FUNC_GPIO163 (MTK_PIN_NO(163) | 0)
+#define MT2712_PIN_163_SPI1_CK__FUNC_SPI_CK_1_ (MTK_PIN_NO(163) | 1)
+#define MT2712_PIN_163_SPI1_CK__FUNC_SPI_CK_4_ (MTK_PIN_NO(163) | 2)
+#define MT2712_PIN_163_SPI1_CK__FUNC_I2S_IQ0_SDQB (MTK_PIN_NO(163) | 4)
+#define MT2712_PIN_163_SPI1_CK__FUNC_I2SO2_WS (MTK_PIN_NO(163) | 5)
+#define MT2712_PIN_163_SPI1_CK__FUNC_TDMO0_BCK (MTK_PIN_NO(163) | 6)
+#define MT2712_PIN_163_SPI1_CK__FUNC_I2SO0_BCK (MTK_PIN_NO(163) | 7)
+
+#define MT2712_PIN_164_SPI1_SO__FUNC_GPIO164 (MTK_PIN_NO(164) | 0)
+#define MT2712_PIN_164_SPI1_SO__FUNC_SPI_SO_1_ (MTK_PIN_NO(164) | 1)
+#define MT2712_PIN_164_SPI1_SO__FUNC_SPI_MO_4_ (MTK_PIN_NO(164) | 2)
+#define MT2712_PIN_164_SPI1_SO__FUNC_I2S_IQ0_SDIB (MTK_PIN_NO(164) | 4)
+#define MT2712_PIN_164_SPI1_SO__FUNC_I2SO2_MCK (MTK_PIN_NO(164) | 5)
+#define MT2712_PIN_164_SPI1_SO__FUNC_TDMO0_LRCK (MTK_PIN_NO(164) | 6)
+#define MT2712_PIN_164_SPI1_SO__FUNC_I2SO0_WS (MTK_PIN_NO(164) | 7)
+
+#define MT2712_PIN_165_SPI4_CSN__FUNC_GPIO165 (MTK_PIN_NO(165) | 0)
+#define MT2712_PIN_165_SPI4_CSN__FUNC_SPI_CS_4_ (MTK_PIN_NO(165) | 1)
+#define MT2712_PIN_165_SPI4_CSN__FUNC_LCM_RST0 (MTK_PIN_NO(165) | 2)
+#define MT2712_PIN_165_SPI4_CSN__FUNC_SPI_CS_1_ (MTK_PIN_NO(165) | 3)
+#define MT2712_PIN_165_SPI4_CSN__FUNC_UTXD4 (MTK_PIN_NO(165) | 4)
+#define MT2712_PIN_165_SPI4_CSN__FUNC_I2SO1_DO (MTK_PIN_NO(165) | 5)
+#define MT2712_PIN_165_SPI4_CSN__FUNC_TDMO0_MCLK (MTK_PIN_NO(165) | 6)
+#define MT2712_PIN_165_SPI4_CSN__FUNC_I2SO0_MCK (MTK_PIN_NO(165) | 7)
+
+#define MT2712_PIN_166_SPI4_MI__FUNC_GPIO166 (MTK_PIN_NO(166) | 0)
+#define MT2712_PIN_166_SPI4_MI__FUNC_SPI_MI_4_ (MTK_PIN_NO(166) | 1)
+#define MT2712_PIN_166_SPI4_MI__FUNC_DSIA_TE (MTK_PIN_NO(166) | 2)
+#define MT2712_PIN_166_SPI4_MI__FUNC_SPI_SI_1_ (MTK_PIN_NO(166) | 3)
+#define MT2712_PIN_166_SPI4_MI__FUNC_URXD4 (MTK_PIN_NO(166) | 4)
+#define MT2712_PIN_166_SPI4_MI__FUNC_I2SO1_BCK (MTK_PIN_NO(166) | 5)
+
+#define MT2712_PIN_167_SPI4_MO__FUNC_GPIO167 (MTK_PIN_NO(167) | 0)
+#define MT2712_PIN_167_SPI4_MO__FUNC_SPI_MO_4_ (MTK_PIN_NO(167) | 1)
+#define MT2712_PIN_167_SPI4_MO__FUNC_DSIB_TE (MTK_PIN_NO(167) | 2)
+#define MT2712_PIN_167_SPI4_MO__FUNC_SPI_SO_1_ (MTK_PIN_NO(167) | 3)
+#define MT2712_PIN_167_SPI4_MO__FUNC_UTXD5 (MTK_PIN_NO(167) | 4)
+#define MT2712_PIN_167_SPI4_MO__FUNC_I2SO1_WS (MTK_PIN_NO(167) | 5)
+
+#define MT2712_PIN_168_SPI4_CK__FUNC_GPIO168 (MTK_PIN_NO(168) | 0)
+#define MT2712_PIN_168_SPI4_CK__FUNC_SPI_CK_4_ (MTK_PIN_NO(168) | 1)
+#define MT2712_PIN_168_SPI4_CK__FUNC_LCM_RST1 (MTK_PIN_NO(168) | 2)
+#define MT2712_PIN_168_SPI4_CK__FUNC_SPI_CK_1_ (MTK_PIN_NO(168) | 3)
+#define MT2712_PIN_168_SPI4_CK__FUNC_URXD5 (MTK_PIN_NO(168) | 4)
+#define MT2712_PIN_168_SPI4_CK__FUNC_I2SO1_MCK (MTK_PIN_NO(168) | 5)
+
+#define MT2712_PIN_169_I2SI0_DATA__FUNC_GPIO169 (MTK_PIN_NO(169) | 0)
+#define MT2712_PIN_169_I2SI0_DATA__FUNC_I2SI0_DI (MTK_PIN_NO(169) | 1)
+#define MT2712_PIN_169_I2SI0_DATA__FUNC_I2SI1_DI (MTK_PIN_NO(169) | 2)
+#define MT2712_PIN_169_I2SI0_DATA__FUNC_I2SI2_DI (MTK_PIN_NO(169) | 3)
+#define MT2712_PIN_169_I2SI0_DATA__FUNC_TDMIN_DI (MTK_PIN_NO(169) | 4)
+
+#define MT2712_PIN_170_I2SI0_LRCK__FUNC_GPIO170 (MTK_PIN_NO(170) | 0)
+#define MT2712_PIN_170_I2SI0_LRCK__FUNC_I2SI0_WS (MTK_PIN_NO(170) | 1)
+#define MT2712_PIN_170_I2SI0_LRCK__FUNC_I2SI1_WS (MTK_PIN_NO(170) | 2)
+#define MT2712_PIN_170_I2SI0_LRCK__FUNC_I2SI2_WS (MTK_PIN_NO(170) | 3)
+#define MT2712_PIN_170_I2SI0_LRCK__FUNC_TDMIN_LRCK (MTK_PIN_NO(170) | 4)
+#define MT2712_PIN_170_I2SI0_LRCK__FUNC_TDMO0_DATA3 (MTK_PIN_NO(170) | 5)
+#define MT2712_PIN_170_I2SI0_LRCK__FUNC_TDMO1_DATA3 (MTK_PIN_NO(170) | 6)
+
+#define MT2712_PIN_171_I2SI0_MCLK__FUNC_GPIO171 (MTK_PIN_NO(171) | 0)
+#define MT2712_PIN_171_I2SI0_MCLK__FUNC_I2SI0_MCK (MTK_PIN_NO(171) | 1)
+#define MT2712_PIN_171_I2SI0_MCLK__FUNC_I2SI1_MCK (MTK_PIN_NO(171) | 2)
+#define MT2712_PIN_171_I2SI0_MCLK__FUNC_I2SI2_MCK (MTK_PIN_NO(171) | 3)
+#define MT2712_PIN_171_I2SI0_MCLK__FUNC_TDMIN_MCLK (MTK_PIN_NO(171) | 4)
+#define MT2712_PIN_171_I2SI0_MCLK__FUNC_TDMO0_DATA2 (MTK_PIN_NO(171) | 5)
+#define MT2712_PIN_171_I2SI0_MCLK__FUNC_TDMO1_DATA2 (MTK_PIN_NO(171) | 6)
+
+#define MT2712_PIN_172_I2SI0_BCK__FUNC_GPIO172 (MTK_PIN_NO(172) | 0)
+#define MT2712_PIN_172_I2SI0_BCK__FUNC_I2SI0_BCK (MTK_PIN_NO(172) | 1)
+#define MT2712_PIN_172_I2SI0_BCK__FUNC_I2SI1_BCK (MTK_PIN_NO(172) | 2)
+#define MT2712_PIN_172_I2SI0_BCK__FUNC_I2SI2_BCK (MTK_PIN_NO(172) | 3)
+#define MT2712_PIN_172_I2SI0_BCK__FUNC_TDMIN_BCK (MTK_PIN_NO(172) | 4)
+#define MT2712_PIN_172_I2SI0_BCK__FUNC_TDMO0_DATA1 (MTK_PIN_NO(172) | 5)
+#define MT2712_PIN_172_I2SI0_BCK__FUNC_TDMO1_DATA1 (MTK_PIN_NO(172) | 6)
+
+#define MT2712_PIN_173_I2SI2_DATA__FUNC_GPIO173 (MTK_PIN_NO(173) | 0)
+#define MT2712_PIN_173_I2SI2_DATA__FUNC_I2SI2_DI (MTK_PIN_NO(173) | 1)
+#define MT2712_PIN_173_I2SI2_DATA__FUNC_I2SI0_DI (MTK_PIN_NO(173) | 2)
+#define MT2712_PIN_173_I2SI2_DATA__FUNC_I2SI1_DI (MTK_PIN_NO(173) | 3)
+#define MT2712_PIN_173_I2SI2_DATA__FUNC_PCM1_DI (MTK_PIN_NO(173) | 4)
+#define MT2712_PIN_173_I2SI2_DATA__FUNC_TDMIN_DI (MTK_PIN_NO(173) | 5)
+#define MT2712_PIN_173_I2SI2_DATA__FUNC_PCM1_DO (MTK_PIN_NO(173) | 6)
+
+#define MT2712_PIN_174_I2SI2_MCLK__FUNC_GPIO174 (MTK_PIN_NO(174) | 0)
+#define MT2712_PIN_174_I2SI2_MCLK__FUNC_I2SI2_MCK (MTK_PIN_NO(174) | 1)
+#define MT2712_PIN_174_I2SI2_MCLK__FUNC_I2SI0_MCK (MTK_PIN_NO(174) | 2)
+#define MT2712_PIN_174_I2SI2_MCLK__FUNC_I2SI1_MCK (MTK_PIN_NO(174) | 3)
+#define MT2712_PIN_174_I2SI2_MCLK__FUNC_PCM1_DO (MTK_PIN_NO(174) | 4)
+#define MT2712_PIN_174_I2SI2_MCLK__FUNC_TDMIN_MCLK (MTK_PIN_NO(174) | 5)
+#define MT2712_PIN_174_I2SI2_MCLK__FUNC_PCM1_DI (MTK_PIN_NO(174) | 6)
+#define MT2712_PIN_174_I2SI2_MCLK__FUNC_I2S_IQ2_SDQB (MTK_PIN_NO(174) | 7)
+
+#define MT2712_PIN_175_I2SI2_BCK__FUNC_GPIO175 (MTK_PIN_NO(175) | 0)
+#define MT2712_PIN_175_I2SI2_BCK__FUNC_I2SI2_BCK (MTK_PIN_NO(175) | 1)
+#define MT2712_PIN_175_I2SI2_BCK__FUNC_I2SI0_BCK (MTK_PIN_NO(175) | 2)
+#define MT2712_PIN_175_I2SI2_BCK__FUNC_I2SI1_BCK (MTK_PIN_NO(175) | 3)
+#define MT2712_PIN_175_I2SI2_BCK__FUNC_PCM1_CLK (MTK_PIN_NO(175) | 4)
+#define MT2712_PIN_175_I2SI2_BCK__FUNC_TDMIN_BCK (MTK_PIN_NO(175) | 5)
+
+#define MT2712_PIN_176_I2SI2_LRCK__FUNC_GPIO176 (MTK_PIN_NO(176) | 0)
+#define MT2712_PIN_176_I2SI2_LRCK__FUNC_I2SI2_WS (MTK_PIN_NO(176) | 1)
+#define MT2712_PIN_176_I2SI2_LRCK__FUNC_I2SI0_WS (MTK_PIN_NO(176) | 2)
+#define MT2712_PIN_176_I2SI2_LRCK__FUNC_I2SI1_WS (MTK_PIN_NO(176) | 3)
+#define MT2712_PIN_176_I2SI2_LRCK__FUNC_PCM1_SYNC (MTK_PIN_NO(176) | 4)
+#define MT2712_PIN_176_I2SI2_LRCK__FUNC_TDMIN_LRCK (MTK_PIN_NO(176) | 5)
+
+#define MT2712_PIN_177_I2SI1_DATA__FUNC_GPIO177 (MTK_PIN_NO(177) | 0)
+#define MT2712_PIN_177_I2SI1_DATA__FUNC_I2SI1_DI (MTK_PIN_NO(177) | 1)
+#define MT2712_PIN_177_I2SI1_DATA__FUNC_I2SI0_DI (MTK_PIN_NO(177) | 2)
+#define MT2712_PIN_177_I2SI1_DATA__FUNC_I2SI2_DI (MTK_PIN_NO(177) | 3)
+#define MT2712_PIN_177_I2SI1_DATA__FUNC_TDMIN_DI (MTK_PIN_NO(177) | 4)
+
+#define MT2712_PIN_178_I2SI1_BCK__FUNC_GPIO178 (MTK_PIN_NO(178) | 0)
+#define MT2712_PIN_178_I2SI1_BCK__FUNC_I2SI1_BCK (MTK_PIN_NO(178) | 1)
+#define MT2712_PIN_178_I2SI1_BCK__FUNC_I2SI0_BCK (MTK_PIN_NO(178) | 2)
+#define MT2712_PIN_178_I2SI1_BCK__FUNC_I2SI2_BCK (MTK_PIN_NO(178) | 3)
+#define MT2712_PIN_178_I2SI1_BCK__FUNC_TDMIN_BCK (MTK_PIN_NO(178) | 4)
+#define MT2712_PIN_178_I2SI1_BCK__FUNC_TDMO0_DATA3 (MTK_PIN_NO(178) | 5)
+#define MT2712_PIN_178_I2SI1_BCK__FUNC_TDMO1_DATA3 (MTK_PIN_NO(178) | 6)
+
+#define MT2712_PIN_179_I2SI1_LRCK__FUNC_GPIO179 (MTK_PIN_NO(179) | 0)
+#define MT2712_PIN_179_I2SI1_LRCK__FUNC_I2SI1_WS (MTK_PIN_NO(179) | 1)
+#define MT2712_PIN_179_I2SI1_LRCK__FUNC_I2SI0_WS (MTK_PIN_NO(179) | 2)
+#define MT2712_PIN_179_I2SI1_LRCK__FUNC_I2SI2_WS (MTK_PIN_NO(179) | 3)
+#define MT2712_PIN_179_I2SI1_LRCK__FUNC_TDMIN_LRCK (MTK_PIN_NO(179) | 4)
+#define MT2712_PIN_179_I2SI1_LRCK__FUNC_TDMO0_DATA2 (MTK_PIN_NO(179) | 5)
+#define MT2712_PIN_179_I2SI1_LRCK__FUNC_TDMO1_DATA2 (MTK_PIN_NO(179) | 6)
+
+#define MT2712_PIN_180_I2SI1_MCLK__FUNC_GPIO180 (MTK_PIN_NO(180) | 0)
+#define MT2712_PIN_180_I2SI1_MCLK__FUNC_I2SI1_MCK (MTK_PIN_NO(180) | 1)
+#define MT2712_PIN_180_I2SI1_MCLK__FUNC_I2SI0_MCK (MTK_PIN_NO(180) | 2)
+#define MT2712_PIN_180_I2SI1_MCLK__FUNC_I2SI2_MCK (MTK_PIN_NO(180) | 3)
+#define MT2712_PIN_180_I2SI1_MCLK__FUNC_TDMIN_MCLK (MTK_PIN_NO(180) | 4)
+#define MT2712_PIN_180_I2SI1_MCLK__FUNC_TDMO0_DATA1 (MTK_PIN_NO(180) | 5)
+#define MT2712_PIN_180_I2SI1_MCLK__FUNC_TDMO1_DATA1 (MTK_PIN_NO(180) | 6)
+#define MT2712_PIN_180_I2SI1_MCLK__FUNC_I2S_IQ2_SDIB (MTK_PIN_NO(180) | 7)
+
+#define MT2712_PIN_181_I2SO1_DATA0__FUNC_GPIO181 (MTK_PIN_NO(181) | 0)
+#define MT2712_PIN_181_I2SO1_DATA0__FUNC_I2SO1_DO (MTK_PIN_NO(181) | 1)
+#define MT2712_PIN_181_I2SO1_DATA0__FUNC_I2SO0_DO0 (MTK_PIN_NO(181) | 2)
+#define MT2712_PIN_181_I2SO1_DATA0__FUNC_I2SO2_DO (MTK_PIN_NO(181) | 3)
+#define MT2712_PIN_181_I2SO1_DATA0__FUNC_DAI_TX (MTK_PIN_NO(181) | 4)
+#define MT2712_PIN_181_I2SO1_DATA0__FUNC_TDMIN_MCLK (MTK_PIN_NO(181) | 5)
+#define MT2712_PIN_181_I2SO1_DATA0__FUNC_I2S_IQ2_SDIA (MTK_PIN_NO(181) | 7)
+
+#define MT2712_PIN_182_I2SO1_BCK__FUNC_GPIO182 (MTK_PIN_NO(182) | 0)
+#define MT2712_PIN_182_I2SO1_BCK__FUNC_I2SO1_BCK (MTK_PIN_NO(182) | 1)
+#define MT2712_PIN_182_I2SO1_BCK__FUNC_I2SO0_BCK (MTK_PIN_NO(182) | 2)
+#define MT2712_PIN_182_I2SO1_BCK__FUNC_I2SO2_BCK (MTK_PIN_NO(182) | 3)
+#define MT2712_PIN_182_I2SO1_BCK__FUNC_DAI_SYNC (MTK_PIN_NO(182) | 4)
+#define MT2712_PIN_182_I2SO1_BCK__FUNC_TDMIN_BCK (MTK_PIN_NO(182) | 5)
+#define MT2712_PIN_182_I2SO1_BCK__FUNC_TDMO0_DATA3 (MTK_PIN_NO(182) | 6)
+#define MT2712_PIN_182_I2SO1_BCK__FUNC_I2S_IQ2_BCK (MTK_PIN_NO(182) | 7)
+
+#define MT2712_PIN_183_I2SO1_LRCK__FUNC_GPIO183 (MTK_PIN_NO(183) | 0)
+#define MT2712_PIN_183_I2SO1_LRCK__FUNC_I2SO1_WS (MTK_PIN_NO(183) | 1)
+#define MT2712_PIN_183_I2SO1_LRCK__FUNC_I2SO0_WS (MTK_PIN_NO(183) | 2)
+#define MT2712_PIN_183_I2SO1_LRCK__FUNC_I2SO2_WS (MTK_PIN_NO(183) | 3)
+#define MT2712_PIN_183_I2SO1_LRCK__FUNC_DAI_CLK (MTK_PIN_NO(183) | 4)
+#define MT2712_PIN_183_I2SO1_LRCK__FUNC_TDMIN_DI (MTK_PIN_NO(183) | 5)
+#define MT2712_PIN_183_I2SO1_LRCK__FUNC_TDMO0_DATA2 (MTK_PIN_NO(183) | 6)
+#define MT2712_PIN_183_I2SO1_LRCK__FUNC_I2S_IQ2_WS (MTK_PIN_NO(183) | 7)
+
+#define MT2712_PIN_184_I2SO1_MCLK__FUNC_GPIO184 (MTK_PIN_NO(184) | 0)
+#define MT2712_PIN_184_I2SO1_MCLK__FUNC_I2SO1_MCK (MTK_PIN_NO(184) | 1)
+#define MT2712_PIN_184_I2SO1_MCLK__FUNC_I2SO0_MCK (MTK_PIN_NO(184) | 2)
+#define MT2712_PIN_184_I2SO1_MCLK__FUNC_I2SO2_MCK (MTK_PIN_NO(184) | 3)
+#define MT2712_PIN_184_I2SO1_MCLK__FUNC_DAI_RX (MTK_PIN_NO(184) | 4)
+#define MT2712_PIN_184_I2SO1_MCLK__FUNC_TDMIN_LRCK (MTK_PIN_NO(184) | 5)
+#define MT2712_PIN_184_I2SO1_MCLK__FUNC_TDMO0_DATA1 (MTK_PIN_NO(184) | 6)
+#define MT2712_PIN_184_I2SO1_MCLK__FUNC_I2S_IQ2_SDQA (MTK_PIN_NO(184) | 7)
+
+#define MT2712_PIN_185_AUD_EXT_CK2__FUNC_GPIO185 (MTK_PIN_NO(185) | 0)
+#define MT2712_PIN_185_AUD_EXT_CK2__FUNC_AUD_EXT_CK2 (MTK_PIN_NO(185) | 1)
+#define MT2712_PIN_185_AUD_EXT_CK2__FUNC_AUD_EXT_CK1 (MTK_PIN_NO(185) | 2)
+#define MT2712_PIN_185_AUD_EXT_CK2__FUNC_I2SO1_DO (MTK_PIN_NO(185) | 3)
+#define MT2712_PIN_185_AUD_EXT_CK2__FUNC_I2SI2_DI (MTK_PIN_NO(185) | 4)
+#define MT2712_PIN_185_AUD_EXT_CK2__FUNC_MRG_RX (MTK_PIN_NO(185) | 5)
+#define MT2712_PIN_185_AUD_EXT_CK2__FUNC_PCM1_DI (MTK_PIN_NO(185) | 6)
+#define MT2712_PIN_185_AUD_EXT_CK2__FUNC_I2S_IQ0_SDQB (MTK_PIN_NO(185) | 7)
+
+#define MT2712_PIN_186_AUD_EXT_CK1__FUNC_GPIO186 (MTK_PIN_NO(186) | 0)
+#define MT2712_PIN_186_AUD_EXT_CK1__FUNC_AUD_EXT_CK1 (MTK_PIN_NO(186) | 1)
+#define MT2712_PIN_186_AUD_EXT_CK1__FUNC_AUD_EXT_CK2 (MTK_PIN_NO(186) | 2)
+#define MT2712_PIN_186_AUD_EXT_CK1__FUNC_I2SO0_DO1 (MTK_PIN_NO(186) | 3)
+#define MT2712_PIN_186_AUD_EXT_CK1__FUNC_I2SI1_DI (MTK_PIN_NO(186) | 4)
+#define MT2712_PIN_186_AUD_EXT_CK1__FUNC_MRG_TX (MTK_PIN_NO(186) | 5)
+#define MT2712_PIN_186_AUD_EXT_CK1__FUNC_PCM1_DO (MTK_PIN_NO(186) | 6)
+#define MT2712_PIN_186_AUD_EXT_CK1__FUNC_I2S_IQ0_SDIB (MTK_PIN_NO(186) | 7)
+
+#define MT2712_PIN_187_I2SO2_BCK__FUNC_GPIO187 (MTK_PIN_NO(187) | 0)
+#define MT2712_PIN_187_I2SO2_BCK__FUNC_I2SO2_BCK (MTK_PIN_NO(187) | 1)
+#define MT2712_PIN_187_I2SO2_BCK__FUNC_I2SO0_BCK (MTK_PIN_NO(187) | 2)
+#define MT2712_PIN_187_I2SO2_BCK__FUNC_I2SO1_BCK (MTK_PIN_NO(187) | 3)
+#define MT2712_PIN_187_I2SO2_BCK__FUNC_PCM1_CLK (MTK_PIN_NO(187) | 4)
+#define MT2712_PIN_187_I2SO2_BCK__FUNC_MRG_SYNC (MTK_PIN_NO(187) | 5)
+#define MT2712_PIN_187_I2SO2_BCK__FUNC_TDMO1_DATA3 (MTK_PIN_NO(187) | 6)
+#define MT2712_PIN_187_I2SO2_BCK__FUNC_I2S_IQ0_BCK (MTK_PIN_NO(187) | 7)
+
+#define MT2712_PIN_188_I2SO2_LRCK__FUNC_GPIO188 (MTK_PIN_NO(188) | 0)
+#define MT2712_PIN_188_I2SO2_LRCK__FUNC_I2SO2_WS (MTK_PIN_NO(188) | 1)
+#define MT2712_PIN_188_I2SO2_LRCK__FUNC_I2SO0_WS (MTK_PIN_NO(188) | 2)
+#define MT2712_PIN_188_I2SO2_LRCK__FUNC_I2SO1_WS (MTK_PIN_NO(188) | 3)
+#define MT2712_PIN_188_I2SO2_LRCK__FUNC_PCM1_SYNC (MTK_PIN_NO(188) | 4)
+#define MT2712_PIN_188_I2SO2_LRCK__FUNC_MRG_CLK (MTK_PIN_NO(188) | 5)
+#define MT2712_PIN_188_I2SO2_LRCK__FUNC_TDMO1_DATA2 (MTK_PIN_NO(188) | 6)
+#define MT2712_PIN_188_I2SO2_LRCK__FUNC_I2S_IQ0_WS (MTK_PIN_NO(188) | 7)
+
+#define MT2712_PIN_189_I2SO2_MCLK__FUNC_GPIO189 (MTK_PIN_NO(189) | 0)
+#define MT2712_PIN_189_I2SO2_MCLK__FUNC_I2SO2_MCK (MTK_PIN_NO(189) | 1)
+#define MT2712_PIN_189_I2SO2_MCLK__FUNC_I2SO0_MCK (MTK_PIN_NO(189) | 2)
+#define MT2712_PIN_189_I2SO2_MCLK__FUNC_I2SO1_MCK (MTK_PIN_NO(189) | 3)
+#define MT2712_PIN_189_I2SO2_MCLK__FUNC_PCM1_DO (MTK_PIN_NO(189) | 4)
+#define MT2712_PIN_189_I2SO2_MCLK__FUNC_MRG_RX (MTK_PIN_NO(189) | 5)
+#define MT2712_PIN_189_I2SO2_MCLK__FUNC_TDMO1_DATA1 (MTK_PIN_NO(189) | 6)
+#define MT2712_PIN_189_I2SO2_MCLK__FUNC_I2S_IQ0_SDQA (MTK_PIN_NO(189) | 7)
+
+#define MT2712_PIN_190_I2SO2_DATA0__FUNC_GPIO190 (MTK_PIN_NO(190) | 0)
+#define MT2712_PIN_190_I2SO2_DATA0__FUNC_I2SO2_DO (MTK_PIN_NO(190) | 1)
+#define MT2712_PIN_190_I2SO2_DATA0__FUNC_I2SO0_DO0 (MTK_PIN_NO(190) | 2)
+#define MT2712_PIN_190_I2SO2_DATA0__FUNC_I2SO1_DO (MTK_PIN_NO(190) | 3)
+#define MT2712_PIN_190_I2SO2_DATA0__FUNC_PCM1_DI (MTK_PIN_NO(190) | 4)
+#define MT2712_PIN_190_I2SO2_DATA0__FUNC_MRG_TX (MTK_PIN_NO(190) | 5)
+#define MT2712_PIN_190_I2SO2_DATA0__FUNC_PCM1_DO (MTK_PIN_NO(190) | 6)
+#define MT2712_PIN_190_I2SO2_DATA0__FUNC_I2S_IQ0_SDIA (MTK_PIN_NO(190) | 7)
+
+#define MT2712_PIN_191_I2SO0_DATA1__FUNC_GPIO191 (MTK_PIN_NO(191) | 0)
+#define MT2712_PIN_191_I2SO0_DATA1__FUNC_I2SO0_DO1 (MTK_PIN_NO(191) | 1)
+#define MT2712_PIN_191_I2SO0_DATA1__FUNC_I2SI0_DI (MTK_PIN_NO(191) | 2)
+#define MT2712_PIN_191_I2SO0_DATA1__FUNC_I2SI1_DI (MTK_PIN_NO(191) | 3)
+#define MT2712_PIN_191_I2SO0_DATA1__FUNC_I2SI2_DI (MTK_PIN_NO(191) | 4)
+#define MT2712_PIN_191_I2SO0_DATA1__FUNC_DAI_TX (MTK_PIN_NO(191) | 5)
+#define MT2712_PIN_191_I2SO0_DATA1__FUNC_I2S_IQ0_SDQB (MTK_PIN_NO(191) | 6)
+#define MT2712_PIN_191_I2SO0_DATA1__FUNC_I2S_IQ1_SDQB (MTK_PIN_NO(191) | 7)
+
+#define MT2712_PIN_192_I2SO0_MCLK__FUNC_GPIO192 (MTK_PIN_NO(192) | 0)
+#define MT2712_PIN_192_I2SO0_MCLK__FUNC_I2SO0_MCK (MTK_PIN_NO(192) | 1)
+#define MT2712_PIN_192_I2SO0_MCLK__FUNC_I2SO1_MCK (MTK_PIN_NO(192) | 2)
+#define MT2712_PIN_192_I2SO0_MCLK__FUNC_I2SO2_MCK (MTK_PIN_NO(192) | 3)
+#define MT2712_PIN_192_I2SO0_MCLK__FUNC_USB4_FT_SCL (MTK_PIN_NO(192) | 4)
+#define MT2712_PIN_192_I2SO0_MCLK__FUNC_TDMO1_DATA3 (MTK_PIN_NO(192) | 5)
+#define MT2712_PIN_192_I2SO0_MCLK__FUNC_I2S_IQ0_SDIB (MTK_PIN_NO(192) | 6)
+#define MT2712_PIN_192_I2SO0_MCLK__FUNC_I2S_IQ1_SDQA (MTK_PIN_NO(192) | 7)
+
+#define MT2712_PIN_193_I2SO0_DATA0__FUNC_GPIO193 (MTK_PIN_NO(193) | 0)
+#define MT2712_PIN_193_I2SO0_DATA0__FUNC_I2SO0_DO0 (MTK_PIN_NO(193) | 1)
+#define MT2712_PIN_193_I2SO0_DATA0__FUNC_I2SO1_DO (MTK_PIN_NO(193) | 2)
+#define MT2712_PIN_193_I2SO0_DATA0__FUNC_I2SO2_DO (MTK_PIN_NO(193) | 3)
+#define MT2712_PIN_193_I2SO0_DATA0__FUNC_USB4_FT_SDA (MTK_PIN_NO(193) | 4)
+#define MT2712_PIN_193_I2SO0_DATA0__FUNC_I2S_IQ1_SDIA (MTK_PIN_NO(193) | 7)
+
+#define MT2712_PIN_194_I2SO0_LRCK__FUNC_GPIO194 (MTK_PIN_NO(194) | 0)
+#define MT2712_PIN_194_I2SO0_LRCK__FUNC_I2SO0_WS (MTK_PIN_NO(194) | 1)
+#define MT2712_PIN_194_I2SO0_LRCK__FUNC_I2SO1_WS (MTK_PIN_NO(194) | 2)
+#define MT2712_PIN_194_I2SO0_LRCK__FUNC_I2SO2_WS (MTK_PIN_NO(194) | 3)
+#define MT2712_PIN_194_I2SO0_LRCK__FUNC_USB5_FT_SCL (MTK_PIN_NO(194) | 4)
+#define MT2712_PIN_194_I2SO0_LRCK__FUNC_TDMO1_DATA2 (MTK_PIN_NO(194) | 5)
+#define MT2712_PIN_194_I2SO0_LRCK__FUNC_I2S_IQ1_WS (MTK_PIN_NO(194) | 7)
+
+#define MT2712_PIN_195_I2SO0_BCK__FUNC_GPIO195 (MTK_PIN_NO(195) | 0)
+#define MT2712_PIN_195_I2SO0_BCK__FUNC_I2SO0_BCK (MTK_PIN_NO(195) | 1)
+#define MT2712_PIN_195_I2SO0_BCK__FUNC_I2SO1_BCK (MTK_PIN_NO(195) | 2)
+#define MT2712_PIN_195_I2SO0_BCK__FUNC_I2SO2_BCK (MTK_PIN_NO(195) | 3)
+#define MT2712_PIN_195_I2SO0_BCK__FUNC_USB5_FT_SDA (MTK_PIN_NO(195) | 4)
+#define MT2712_PIN_195_I2SO0_BCK__FUNC_TDMO1_DATA1 (MTK_PIN_NO(195) | 5)
+#define MT2712_PIN_195_I2SO0_BCK__FUNC_I2S_IQ1_BCK (MTK_PIN_NO(195) | 7)
+
+#define MT2712_PIN_196_TDMO1_MCLK__FUNC_GPIO196 (MTK_PIN_NO(196) | 0)
+#define MT2712_PIN_196_TDMO1_MCLK__FUNC_TDMO1_MCLK (MTK_PIN_NO(196) | 1)
+#define MT2712_PIN_196_TDMO1_MCLK__FUNC_TDMO0_MCLK (MTK_PIN_NO(196) | 2)
+#define MT2712_PIN_196_TDMO1_MCLK__FUNC_TDMIN_MCLK (MTK_PIN_NO(196) | 3)
+#define MT2712_PIN_196_TDMO1_MCLK__FUNC_I2SO0_DO1 (MTK_PIN_NO(196) | 6)
+#define MT2712_PIN_196_TDMO1_MCLK__FUNC_I2S_IQ1_SDIB (MTK_PIN_NO(196) | 7)
+
+#define MT2712_PIN_197_TDMO1_LRCK__FUNC_GPIO197 (MTK_PIN_NO(197) | 0)
+#define MT2712_PIN_197_TDMO1_LRCK__FUNC_TDMO1_LRCK (MTK_PIN_NO(197) | 1)
+#define MT2712_PIN_197_TDMO1_LRCK__FUNC_TDMO0_LRCK (MTK_PIN_NO(197) | 2)
+#define MT2712_PIN_197_TDMO1_LRCK__FUNC_TDMIN_LRCK (MTK_PIN_NO(197) | 3)
+#define MT2712_PIN_197_TDMO1_LRCK__FUNC_TDMO0_DATA3 (MTK_PIN_NO(197) | 4)
+#define MT2712_PIN_197_TDMO1_LRCK__FUNC_TDMO1_DATA3 (MTK_PIN_NO(197) | 5)
+#define MT2712_PIN_197_TDMO1_LRCK__FUNC_I2SO3_MCK (MTK_PIN_NO(197) | 6)
+#define MT2712_PIN_197_TDMO1_LRCK__FUNC_TDMO1_DATA2 (MTK_PIN_NO(197) | 7)
+
+#define MT2712_PIN_198_TDMO1_BCK__FUNC_GPIO198 (MTK_PIN_NO(198) | 0)
+#define MT2712_PIN_198_TDMO1_BCK__FUNC_TDMO1_BCK (MTK_PIN_NO(198) | 1)
+#define MT2712_PIN_198_TDMO1_BCK__FUNC_TDMO0_BCK (MTK_PIN_NO(198) | 2)
+#define MT2712_PIN_198_TDMO1_BCK__FUNC_TDMIN_BCK (MTK_PIN_NO(198) | 3)
+#define MT2712_PIN_198_TDMO1_BCK__FUNC_TDMO0_DATA2 (MTK_PIN_NO(198) | 4)
+#define MT2712_PIN_198_TDMO1_BCK__FUNC_TDMO1_DATA2 (MTK_PIN_NO(198) | 5)
+#define MT2712_PIN_198_TDMO1_BCK__FUNC_I2SO3_BCK (MTK_PIN_NO(198) | 6)
+#define MT2712_PIN_198_TDMO1_BCK__FUNC_TDMO1_DATA1 (MTK_PIN_NO(198) | 7)
+
+#define MT2712_PIN_199_TDMO1_DATA__FUNC_GPIO199 (MTK_PIN_NO(199) | 0)
+#define MT2712_PIN_199_TDMO1_DATA__FUNC_TDMO1_DATA (MTK_PIN_NO(199) | 1)
+#define MT2712_PIN_199_TDMO1_DATA__FUNC_TDMO0_DATA (MTK_PIN_NO(199) | 2)
+#define MT2712_PIN_199_TDMO1_DATA__FUNC_TDMIN_DI (MTK_PIN_NO(199) | 3)
+#define MT2712_PIN_199_TDMO1_DATA__FUNC_TDMO0_DATA1 (MTK_PIN_NO(199) | 4)
+#define MT2712_PIN_199_TDMO1_DATA__FUNC_TDMO1_DATA1 (MTK_PIN_NO(199) | 5)
+#define MT2712_PIN_199_TDMO1_DATA__FUNC_I2SO3_WS (MTK_PIN_NO(199) | 6)
+
+#define MT2712_PIN_200_TDMO0_MCLK__FUNC_GPIO200 (MTK_PIN_NO(200) | 0)
+#define MT2712_PIN_200_TDMO0_MCLK__FUNC_TDMO0_MCLK0 (MTK_PIN_NO(200) | 1)
+#define MT2712_PIN_200_TDMO0_MCLK__FUNC_TDMO1_MCLK0 (MTK_PIN_NO(200) | 2)
+#define MT2712_PIN_200_TDMO0_MCLK__FUNC_PCM1_DI (MTK_PIN_NO(200) | 3)
+#define MT2712_PIN_200_TDMO0_MCLK__FUNC_TDMO0_MCLK1 (MTK_PIN_NO(200) | 4)
+#define MT2712_PIN_200_TDMO0_MCLK__FUNC_TDMO1_MCLK1 (MTK_PIN_NO(200) | 5)
+#define MT2712_PIN_200_TDMO0_MCLK__FUNC_MRG_TX (MTK_PIN_NO(200) | 6)
+#define MT2712_PIN_200_TDMO0_MCLK__FUNC_I2SO2_MCK (MTK_PIN_NO(200) | 7)
+
+#define MT2712_PIN_201_TDMO0_LRCK__FUNC_GPIO201 (MTK_PIN_NO(201) | 0)
+#define MT2712_PIN_201_TDMO0_LRCK__FUNC_TDMO0_LRCK0 (MTK_PIN_NO(201) | 1)
+#define MT2712_PIN_201_TDMO0_LRCK__FUNC_TDMO1_LRCK0 (MTK_PIN_NO(201) | 2)
+#define MT2712_PIN_201_TDMO0_LRCK__FUNC_PCM1_SYNC (MTK_PIN_NO(201) | 3)
+#define MT2712_PIN_201_TDMO0_LRCK__FUNC_TDMO0_LRCK1 (MTK_PIN_NO(201) | 4)
+#define MT2712_PIN_201_TDMO0_LRCK__FUNC_TDMO1_LRCK1 (MTK_PIN_NO(201) | 5)
+#define MT2712_PIN_201_TDMO0_LRCK__FUNC_MRG_RX (MTK_PIN_NO(201) | 6)
+#define MT2712_PIN_201_TDMO0_LRCK__FUNC_I2SO2_WS (MTK_PIN_NO(201) | 7)
+
+#define MT2712_PIN_202_TDMO0_BCK__FUNC_GPIO202 (MTK_PIN_NO(202) | 0)
+#define MT2712_PIN_202_TDMO0_BCK__FUNC_TDMO0_BCK0 (MTK_PIN_NO(202) | 1)
+#define MT2712_PIN_202_TDMO0_BCK__FUNC_TDMO1_BCK0 (MTK_PIN_NO(202) | 2)
+#define MT2712_PIN_202_TDMO0_BCK__FUNC_PCM1_CLK (MTK_PIN_NO(202) | 3)
+#define MT2712_PIN_202_TDMO0_BCK__FUNC_TDMO0_BCK1 (MTK_PIN_NO(202) | 4)
+#define MT2712_PIN_202_TDMO0_BCK__FUNC_TDMO1_BCK1 (MTK_PIN_NO(202) | 5)
+#define MT2712_PIN_202_TDMO0_BCK__FUNC_MRG_SYNC (MTK_PIN_NO(202) | 6)
+#define MT2712_PIN_202_TDMO0_BCK__FUNC_I2SO2_BCK (MTK_PIN_NO(202) | 7)
+
+#define MT2712_PIN_203_TDMO0_DATA__FUNC_GPIO203 (MTK_PIN_NO(203) | 0)
+#define MT2712_PIN_203_TDMO0_DATA__FUNC_TDMO0_DATA0 (MTK_PIN_NO(203) | 1)
+#define MT2712_PIN_203_TDMO0_DATA__FUNC_TDMO1_DATA0 (MTK_PIN_NO(203) | 2)
+#define MT2712_PIN_203_TDMO0_DATA__FUNC_PCM1_DO (MTK_PIN_NO(203) | 3)
+#define MT2712_PIN_203_TDMO0_DATA__FUNC_TDMO0_DATA1 (MTK_PIN_NO(203) | 4)
+#define MT2712_PIN_203_TDMO0_DATA__FUNC_TDMO1_DATA1 (MTK_PIN_NO(203) | 5)
+#define MT2712_PIN_203_TDMO0_DATA__FUNC_MRG_CLK (MTK_PIN_NO(203) | 6)
+#define MT2712_PIN_203_TDMO0_DATA__FUNC_I2SO2_DO (MTK_PIN_NO(203) | 7)
+
+#define MT2712_PIN_204_PERSTB_P0__FUNC_GPIO204 (MTK_PIN_NO(204) | 0)
+#define MT2712_PIN_204_PERSTB_P0__FUNC_PERST_B_P0 (MTK_PIN_NO(204) | 1)
+
+#define MT2712_PIN_205_CLKREQN_P0__FUNC_GPIO205 (MTK_PIN_NO(205) | 0)
+#define MT2712_PIN_205_CLKREQN_P0__FUNC_CLKREQ_N_P0 (MTK_PIN_NO(205) | 1)
+
+#define MT2712_PIN_206_WAKEEN_P0__FUNC_GPIO206 (MTK_PIN_NO(206) | 0)
+#define MT2712_PIN_206_WAKEEN_P0__FUNC_WAKE_EN_P0 (MTK_PIN_NO(206) | 1)
+
+#define MT2712_PIN_207_PERSTB_P1__FUNC_GPIO207 (MTK_PIN_NO(207) | 0)
+#define MT2712_PIN_207_PERSTB_P1__FUNC_PERST_B_P1 (MTK_PIN_NO(207) | 1)
+
+#define MT2712_PIN_208_CLKREQN_P1__FUNC_GPIO208 (MTK_PIN_NO(208) | 0)
+#define MT2712_PIN_208_CLKREQN_P1__FUNC_CLKREQ_N_P1 (MTK_PIN_NO(208) | 1)
+
+#define MT2712_PIN_209_WAKEEN_P1__FUNC_GPIO209 (MTK_PIN_NO(209) | 0)
+#define MT2712_PIN_209_WAKEEN_P1__FUNC_WAKE_EN_P1 (MTK_PIN_NO(209) | 1)
+
+#endif /* __DTS_MT2712_PINFUNC_H */
diff --git a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
index 9d88f41aefa0..6d8532af8346 100644
--- a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
@@ -9,6 +9,7 @@
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/power/mt2712-power.h>
+#include "mt2712-pinfunc.h"
/ {
compatible = "mediatek,mt2712";
@@ -199,6 +200,34 @@
clock-output-names = "clkaud_ext_i_2";
};
+ clki2si0_mck_i: oscillator@6 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <30000000>;
+ clock-output-names = "clki2si0_mck_i";
+ };
+
+ clki2si1_mck_i: oscillator@7 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <30000000>;
+ clock-output-names = "clki2si1_mck_i";
+ };
+
+ clki2si2_mck_i: oscillator@8 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <30000000>;
+ clock-output-names = "clki2si2_mck_i";
+ };
+
+ clktdmin_mclk_i: oscillator@9 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <30000000>;
+ clock-output-names = "clktdmin_mclk_i";
+ };
+
timer {
compatible = "arm,armv8-timer";
interrupt-parent = <&gic>;
@@ -230,6 +259,23 @@
#clock-cells = <1>;
};
+ syscfg_pctl_a: syscfg_pctl_a@10005000 {
+ compatible = "mediatek,mt2712-pctl-a-syscfg", "syscon";
+ reg = <0 0x10005000 0 0x1000>;
+ };
+
+ pio: pinctrl@10005000 {
+ compatible = "mediatek,mt2712-pinctrl";
+ reg = <0 0x1000b000 0 0x1000>;
+ mediatek,pctl-regmap = <&syscfg_pctl_a>;
+ pins-are-numbered;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
scpsys: scpsys@10006000 {
compatible = "mediatek,mt2712-scpsys", "syscon";
#power-domain-cells = <1>;
diff --git a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
index 45d8655ee423..b7837642c33a 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
@@ -18,7 +18,7 @@
compatible = "mediatek,mt7622-rfb1", "mediatek,mt7622";
chosen {
- bootargs = "console=ttyS0,115200n1";
+ bootargs = "console=ttyS0,115200n1 swiotlb=512";
};
cpus {
@@ -163,10 +163,17 @@
i2s1_pins: i2s1-pins {
mux {
function = "i2s";
- groups = "i2s_out_bclk_ws_mclk",
+ groups = "i2s_out_mclk_bclk_ws",
"i2s1_in_data",
"i2s1_out_data";
};
+
+ conf {
+ pins = "I2S1_IN", "I2S1_OUT", "I2S_BCLK",
+ "I2S_WS", "I2S_MCLK";
+ drive-strength = <12>;
+ bias-pull-down;
+ };
};
irrx_pins: irrx-pins {
diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
index e9d5130df8d1..9213c966c224 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
@@ -527,6 +527,95 @@
status = "disabled";
};
+ audsys: clock-controller@11220000 {
+ compatible = "mediatek,mt7622-audsys", "syscon";
+ reg = <0 0x11220000 0 0x2000>;
+ #clock-cells = <1>;
+
+ afe: audio-controller {
+ compatible = "mediatek,mt7622-audio";
+ interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 145 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-names = "afe", "asys";
+
+ clocks = <&infracfg CLK_INFRA_AUDIO_PD>,
+ <&topckgen CLK_TOP_AUD1_SEL>,
+ <&topckgen CLK_TOP_AUD2_SEL>,
+ <&topckgen CLK_TOP_A1SYS_HP_DIV_PD>,
+ <&topckgen CLK_TOP_A2SYS_HP_DIV_PD>,
+ <&topckgen CLK_TOP_I2S0_MCK_SEL>,
+ <&topckgen CLK_TOP_I2S1_MCK_SEL>,
+ <&topckgen CLK_TOP_I2S2_MCK_SEL>,
+ <&topckgen CLK_TOP_I2S3_MCK_SEL>,
+ <&topckgen CLK_TOP_I2S0_MCK_DIV>,
+ <&topckgen CLK_TOP_I2S1_MCK_DIV>,
+ <&topckgen CLK_TOP_I2S2_MCK_DIV>,
+ <&topckgen CLK_TOP_I2S3_MCK_DIV>,
+ <&topckgen CLK_TOP_I2S0_MCK_DIV_PD>,
+ <&topckgen CLK_TOP_I2S1_MCK_DIV_PD>,
+ <&topckgen CLK_TOP_I2S2_MCK_DIV_PD>,
+ <&topckgen CLK_TOP_I2S3_MCK_DIV_PD>,
+ <&audsys CLK_AUDIO_I2SO1>,
+ <&audsys CLK_AUDIO_I2SO2>,
+ <&audsys CLK_AUDIO_I2SO3>,
+ <&audsys CLK_AUDIO_I2SO4>,
+ <&audsys CLK_AUDIO_I2SIN1>,
+ <&audsys CLK_AUDIO_I2SIN2>,
+ <&audsys CLK_AUDIO_I2SIN3>,
+ <&audsys CLK_AUDIO_I2SIN4>,
+ <&audsys CLK_AUDIO_ASRCO1>,
+ <&audsys CLK_AUDIO_ASRCO2>,
+ <&audsys CLK_AUDIO_ASRCO3>,
+ <&audsys CLK_AUDIO_ASRCO4>,
+ <&audsys CLK_AUDIO_AFE>,
+ <&audsys CLK_AUDIO_AFE_CONN>,
+ <&audsys CLK_AUDIO_A1SYS>,
+ <&audsys CLK_AUDIO_A2SYS>;
+
+ clock-names = "infra_sys_audio_clk",
+ "top_audio_mux1_sel",
+ "top_audio_mux2_sel",
+ "top_audio_a1sys_hp",
+ "top_audio_a2sys_hp",
+ "i2s0_src_sel",
+ "i2s1_src_sel",
+ "i2s2_src_sel",
+ "i2s3_src_sel",
+ "i2s0_src_div",
+ "i2s1_src_div",
+ "i2s2_src_div",
+ "i2s3_src_div",
+ "i2s0_mclk_en",
+ "i2s1_mclk_en",
+ "i2s2_mclk_en",
+ "i2s3_mclk_en",
+ "i2so0_hop_ck",
+ "i2so1_hop_ck",
+ "i2so2_hop_ck",
+ "i2so3_hop_ck",
+ "i2si0_hop_ck",
+ "i2si1_hop_ck",
+ "i2si2_hop_ck",
+ "i2si3_hop_ck",
+ "asrc0_out_ck",
+ "asrc1_out_ck",
+ "asrc2_out_ck",
+ "asrc3_out_ck",
+ "audio_afe_pd",
+ "audio_afe_conn_pd",
+ "audio_a1sys_pd",
+ "audio_a2sys_pd";
+
+ assigned-clocks = <&topckgen CLK_TOP_A1SYS_HP_SEL>,
+ <&topckgen CLK_TOP_A2SYS_HP_SEL>,
+ <&topckgen CLK_TOP_A1SYS_HP_DIV>,
+ <&topckgen CLK_TOP_A2SYS_HP_DIV>;
+ assigned-clock-parents = <&topckgen CLK_TOP_AUD1PLL>,
+ <&topckgen CLK_TOP_AUD2PLL>;
+ assigned-clock-rates = <0>, <0>, <49152000>, <45158400>;
+ };
+ };
+
mmc0: mmc@11230000 {
compatible = "mediatek,mt7622-mmc";
reg = <0 0x11230000 0 0x1000>;
@@ -735,6 +824,16 @@
#reset-cells = <1>;
};
+ hsdma: dma-controller@1b007000 {
+ compatible = "mediatek,mt7622-hsdma";
+ reg = <0 0x1b007000 0 0x1000>;
+ interrupts = <GIC_SPI 219 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&ethsys CLK_ETH_HSDMA_EN>;
+ clock-names = "hsdma";
+ power-domains = <&scpsys MT7622_POWER_DOMAIN_ETHSYS>;
+ #dma-cells = <1>;
+ };
+
eth: ethernet@1b100000 {
compatible = "mediatek,mt7622-eth",
"mediatek,mt2701-eth",
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 55ec5ee7f7e8..9319e74b8906 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -6,3 +6,4 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8916-mtp.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8992-bullhead-rev-101.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8994-angler-rev-101.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8996-mtp.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sdm845-mtp.dtb
diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi
index 6167af955659..a6ad3d7fe655 100644
--- a/arch/arm64/boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi
@@ -4,7 +4,7 @@
&pm8994_gpios {
pinctrl-names = "default";
- pinctrl-0 = <&ls_exp_gpio_f>;
+ pinctrl-0 = <&ls_exp_gpio_f &bt_en_gpios>;
ls_exp_gpio_f: pm8994_gpio5 {
pinconf {
diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
index 4b8bb026346e..0f829db33efe 100644
--- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
@@ -117,6 +117,16 @@
pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
cd-gpios = <&msmgpio 38 0x1>;
+ vmmc-supply = <&pm8994_l21>;
+ vqmmc-supply = <&pm8994_l13>;
+ status = "okay";
+ };
+
+ phy@627000 {
+ status = "okay";
+ };
+
+ ufshc@624000 {
status = "okay";
};
@@ -169,19 +179,6 @@
pinctrl-0 = <&usb2_vbus_det_gpio>;
};
- bt_en: bt-en-1-8v {
- pinctrl-names = "default";
- pinctrl-0 = <&bt_en_gpios>;
- compatible = "regulator-fixed";
- regulator-name = "bt-en-regulator";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
-
- /* WLAN card specific delay */
- startup-delay-us = <70000>;
- enable-active-high;
- };
-
wlan_en: wlan-en-1-8v {
pinctrl-names = "default";
pinctrl-0 = <&wlan_en_gpios>;
@@ -198,19 +195,18 @@
};
agnoc@0 {
- qcom,pcie@600000 {
+ pcie@600000 {
status = "okay";
perst-gpio = <&msmgpio 35 GPIO_ACTIVE_LOW>;
- vddpe-supply = <&wlan_en>;
- vddpe1-supply = <&bt_en>;
+ vddpe-3v3-supply = <&wlan_en>;
};
- qcom,pcie@608000 {
+ pcie@608000 {
status = "okay";
perst-gpio = <&msmgpio 130 GPIO_ACTIVE_LOW>;
};
- qcom,pcie@610000 {
+ pcie@610000 {
status = "okay";
perst-gpio = <&msmgpio 114 GPIO_ACTIVE_LOW>;
};
diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
index 6a838b5d321e..c13ddee8262b 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
+++ b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
@@ -21,6 +21,7 @@
aliases {
serial0 = &blsp1_uart5;
+ serial1 = &blsp1_uart3;
};
chosen {
@@ -33,20 +34,61 @@
};
soc {
- pinctrl@1000000 {
- serial_4_pins: serial4_pinmux {
- mux {
- pins = "gpio23", "gpio24";
- function = "blsp4_uart1";
- bias-disable;
- };
+ serial@78b3000 {
+ status = "ok";
+ };
+
+ spi@78b5000 {
+ status = "ok";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
};
};
- serial@78b3000 {
- pinctrl-0 = <&serial_4_pins>;
- pinctrl-names = "default";
+ serial@78b1000 {
+ status = "ok";
+ };
+
+ i2c@78b6000 {
+ status = "ok";
+ };
+
+ dma@7984000 {
+ status = "ok";
+ };
+
+ nand@79b0000 {
+ status = "ok";
+
+ nand@0 {
+ reg = <0>;
+ nand-ecc-strength = <4>;
+ nand-ecc-step-size = <512>;
+ nand-bus-width = <8>;
+ };
+ };
+
+ phy@86000 {
+ status = "ok";
+ };
+
+ phy@8e000 {
+ status = "ok";
+ };
+
+ pci@20000000 {
+ status = "ok";
+ perst-gpio = <&tlmm 58 0x1>;
+ };
+
+ pci@10000000 {
status = "ok";
+ perst-gpio = <&tlmm 61 0x1>;
};
};
};
diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
index 2bc5dec5614d..18226980f7c3 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
@@ -24,7 +24,7 @@
ranges = <0 0 0 0xffffffff>;
compatible = "simple-bus";
- pinctrl@1000000 {
+ tlmm: pinctrl@1000000 {
compatible = "qcom,ipq8074-pinctrl";
reg = <0x1000000 0x300000>;
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
@@ -32,6 +32,45 @@
#gpio-cells = <0x2>;
interrupt-controller;
#interrupt-cells = <0x2>;
+
+ serial_4_pins: serial4-pinmux {
+ pins = "gpio23", "gpio24";
+ function = "blsp4_uart1";
+ drive-strength = <8>;
+ bias-disable;
+ };
+
+ i2c_0_pins: i2c-0-pinmux {
+ pins = "gpio42", "gpio43";
+ function = "blsp1_i2c";
+ drive-strength = <8>;
+ bias-disable;
+ };
+
+ spi_0_pins: spi-0-pins {
+ pins = "gpio38", "gpio39", "gpio40", "gpio41";
+ function = "blsp0_spi";
+ drive-strength = <8>;
+ bias-disable;
+ };
+
+ hsuart_pins: hsuart-pins {
+ pins = "gpio46", "gpio47", "gpio48", "gpio49";
+ function = "blsp2_uart";
+ drive-strength = <8>;
+ bias-disable;
+ };
+
+ qpic_pins: qpic-pins {
+ pins = "gpio1", "gpio3", "gpio4",
+ "gpio5", "gpio6", "gpio7",
+ "gpio8", "gpio10", "gpio11",
+ "gpio12", "gpio13", "gpio14",
+ "gpio15", "gpio16", "gpio17";
+ function = "qpic";
+ drive-strength = <8>;
+ bias-disable;
+ };
};
intc: interrupt-controller@b000000 {
@@ -122,6 +161,276 @@
clocks = <&gcc GCC_BLSP1_UART5_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
+ pinctrl-0 = <&serial_4_pins>;
+ pinctrl-names = "default";
+ status = "disabled";
+ };
+
+ blsp_dma: dma@7884000 {
+ compatible = "qcom,bam-v1.7.0";
+ reg = <0x7884000 0x2b000>;
+ interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "bam_clk";
+ #dma-cells = <1>;
+ qcom,ee = <0>;
+ };
+
+ blsp1_uart1: serial@78af000 {
+ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+ reg = <0x78af000 0x200>;
+ interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
+ };
+
+ blsp1_uart3: serial@78b1000 {
+ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+ reg = <0x78b1000 0x200>;
+ interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ dmas = <&blsp_dma 4>,
+ <&blsp_dma 5>;
+ dma-names = "tx", "rx";
+ pinctrl-0 = <&hsuart_pins>;
+ pinctrl-names = "default";
+ status = "disabled";
+ };
+
+ blsp1_spi1: spi@78b5000 {
+ compatible = "qcom,spi-qup-v2.2.1";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x78b5000 0x600>;
+ interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+ spi-max-frequency = <50000000>;
+ clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ dmas = <&blsp_dma 12>, <&blsp_dma 13>;
+ dma-names = "tx", "rx";
+ pinctrl-0 = <&spi_0_pins>;
+ pinctrl-names = "default";
+ status = "disabled";
+ };
+
+ blsp1_i2c2: i2c@78b6000 {
+ compatible = "qcom,i2c-qup-v2.2.1";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x78b6000 0x600>;
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_AHB_CLK>,
+ <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>;
+ clock-names = "iface", "core";
+ clock-frequency = <400000>;
+ dmas = <&blsp_dma 15>, <&blsp_dma 14>;
+ dma-names = "rx", "tx";
+ pinctrl-0 = <&i2c_0_pins>;
+ pinctrl-names = "default";
+ status = "disabled";
+ };
+
+ blsp1_i2c3: i2c@78b7000 {
+ compatible = "qcom,i2c-qup-v2.2.1";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x78b7000 0x600>;
+ interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_AHB_CLK>,
+ <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>;
+ clock-names = "iface", "core";
+ clock-frequency = <100000>;
+ dmas = <&blsp_dma 17>, <&blsp_dma 16>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ qpic_bam: dma@7984000 {
+ compatible = "qcom,bam-v1.7.0";
+ reg = <0x7984000 0x1a000>;
+ interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_QPIC_AHB_CLK>;
+ clock-names = "bam_clk";
+ #dma-cells = <1>;
+ qcom,ee = <0>;
+ status = "disabled";
+ };
+
+ qpic_nand: nand@79b0000 {
+ compatible = "qcom,ipq8074-nand";
+ reg = <0x79b0000 0x10000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&gcc GCC_QPIC_CLK>,
+ <&gcc GCC_QPIC_AHB_CLK>;
+ clock-names = "core", "aon";
+
+ dmas = <&qpic_bam 0>,
+ <&qpic_bam 1>,
+ <&qpic_bam 2>;
+ dma-names = "tx", "rx", "cmd";
+ pinctrl-0 = <&qpic_pins>;
+ pinctrl-names = "default";
+ status = "disabled";
+ };
+
+ pcie_phy0: phy@86000 {
+ compatible = "qcom,ipq8074-qmp-pcie-phy";
+ reg = <0x86000 0x1000>;
+ #phy-cells = <0>;
+ clocks = <&gcc GCC_PCIE0_PIPE_CLK>;
+ clock-names = "pipe_clk";
+ clock-output-names = "pcie20_phy0_pipe_clk";
+
+ resets = <&gcc GCC_PCIE0_PHY_BCR>,
+ <&gcc GCC_PCIE0PHY_PHY_BCR>;
+ reset-names = "phy",
+ "common";
+ status = "disabled";
+ };
+
+ pcie0: pci@20000000 {
+ compatible = "qcom,pcie-ipq8074";
+ reg = <0x20000000 0xf1d
+ 0x20000f20 0xa8
+ 0x80000 0x2000
+ 0x20100000 0x1000>;
+ reg-names = "dbi", "elbi", "parf", "config";
+ device_type = "pci";
+ linux,pci-domain = <0>;
+ bus-range = <0x00 0xff>;
+ num-lanes = <1>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ phys = <&pcie_phy0>;
+ phy-names = "pciephy";
+
+ ranges = <0x81000000 0 0x20200000 0x20200000
+ 0 0x100000 /* downstream I/O */
+ 0x82000000 0 0x20300000 0x20300000
+ 0 0xd00000>; /* non-prefetchable memory */
+
+ interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &intc 0 75
+ IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+ <0 0 0 2 &intc 0 78
+ IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+ <0 0 0 3 &intc 0 79
+ IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+ <0 0 0 4 &intc 0 83
+ IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+ clocks = <&gcc GCC_SYS_NOC_PCIE0_AXI_CLK>,
+ <&gcc GCC_PCIE0_AXI_M_CLK>,
+ <&gcc GCC_PCIE0_AXI_S_CLK>,
+ <&gcc GCC_PCIE0_AHB_CLK>,
+ <&gcc GCC_PCIE0_AUX_CLK>;
+
+ clock-names = "iface",
+ "axi_m",
+ "axi_s",
+ "ahb",
+ "aux";
+ resets = <&gcc GCC_PCIE0_PIPE_ARES>,
+ <&gcc GCC_PCIE0_SLEEP_ARES>,
+ <&gcc GCC_PCIE0_CORE_STICKY_ARES>,
+ <&gcc GCC_PCIE0_AXI_MASTER_ARES>,
+ <&gcc GCC_PCIE0_AXI_SLAVE_ARES>,
+ <&gcc GCC_PCIE0_AHB_ARES>,
+ <&gcc GCC_PCIE0_AXI_MASTER_STICKY_ARES>;
+ reset-names = "pipe",
+ "sleep",
+ "sticky",
+ "axi_m",
+ "axi_s",
+ "ahb",
+ "axi_m_sticky";
+ status = "disabled";
+ };
+
+ pcie_phy1: phy@8e000 {
+ compatible = "qcom,ipq8074-qmp-pcie-phy";
+ reg = <0x8e000 0x1000>;
+ #phy-cells = <0>;
+ clocks = <&gcc GCC_PCIE1_PIPE_CLK>;
+ clock-names = "pipe_clk";
+ clock-output-names = "pcie20_phy1_pipe_clk";
+
+ resets = <&gcc GCC_PCIE1_PHY_BCR>,
+ <&gcc GCC_PCIE1PHY_PHY_BCR>;
+ reset-names = "phy",
+ "common";
+ status = "disabled";
+ };
+
+ pcie1: pci@10000000 {
+ compatible = "qcom,pcie-ipq8074";
+ reg = <0x10000000 0xf1d
+ 0x10000f20 0xa8
+ 0x88000 0x2000
+ 0x10100000 0x1000>;
+ reg-names = "dbi", "elbi", "parf", "config";
+ device_type = "pci";
+ linux,pci-domain = <1>;
+ bus-range = <0x00 0xff>;
+ num-lanes = <1>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ phys = <&pcie_phy1>;
+ phy-names = "pciephy";
+
+ ranges = <0x81000000 0 0x10200000 0x10200000
+ 0 0x100000 /* downstream I/O */
+ 0x82000000 0 0x10300000 0x10300000
+ 0 0xd00000>; /* non-prefetchable memory */
+
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &intc 0 142
+ IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+ <0 0 0 2 &intc 0 143
+ IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+ <0 0 0 3 &intc 0 144
+ IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+ <0 0 0 4 &intc 0 145
+ IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+ clocks = <&gcc GCC_SYS_NOC_PCIE1_AXI_CLK>,
+ <&gcc GCC_PCIE1_AXI_M_CLK>,
+ <&gcc GCC_PCIE1_AXI_S_CLK>,
+ <&gcc GCC_PCIE1_AHB_CLK>,
+ <&gcc GCC_PCIE1_AUX_CLK>;
+ clock-names = "iface",
+ "axi_m",
+ "axi_s",
+ "ahb",
+ "aux";
+ resets = <&gcc GCC_PCIE1_PIPE_ARES>,
+ <&gcc GCC_PCIE1_SLEEP_ARES>,
+ <&gcc GCC_PCIE1_CORE_STICKY_ARES>,
+ <&gcc GCC_PCIE1_AXI_MASTER_ARES>,
+ <&gcc GCC_PCIE1_AXI_SLAVE_ARES>,
+ <&gcc GCC_PCIE1_AHB_ARES>,
+ <&gcc GCC_PCIE1_AXI_MASTER_STICKY_ARES>;
+ reset-names = "pipe",
+ "sleep",
+ "sticky",
+ "axi_m",
+ "axi_s",
+ "ahb",
+ "axi_m_sticky";
status = "disabled";
};
};
@@ -175,7 +484,7 @@
pmu {
compatible = "arm,armv8-pmuv3";
- interrupts = <GIC_PPI 7 GIC_CPU_MASK_SIMPLE(4)>;
+ interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
};
clocks {
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 66b318e1de80..650f356f69ca 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -179,7 +179,7 @@
pmu {
compatible = "arm,cortex-a53-pmu";
- interrupts = <GIC_PPI 7 GIC_CPU_MASK_SIMPLE(4)>;
+ interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4)| IRQ_TYPE_LEVEL_HIGH)>;
};
thermal-zones {
@@ -512,7 +512,7 @@
blsp_i2c2: i2c@78b6000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x078b6000 0x500>;
- interrupts = <GIC_SPI 96 0>;
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_AHB_CLK>,
<&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>;
clock-names = "iface", "core";
@@ -527,7 +527,7 @@
blsp_i2c4: i2c@78b8000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x078b8000 0x500>;
- interrupts = <GIC_SPI 98 0>;
+ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_AHB_CLK>,
<&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>;
clock-names = "iface", "core";
@@ -542,7 +542,7 @@
blsp_i2c6: i2c@78ba000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x078ba000 0x500>;
- interrupts = <GIC_SPI 100 0>;
+ interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_AHB_CLK>,
<&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>;
clock-names = "iface", "core";
@@ -574,7 +574,7 @@
"mi2s-bit-clk3";
#sound-dai-cells = <1>;
- interrupts = <0 160 0>;
+ interrupts = <0 160 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "lpass-irq-lpaif";
reg = <0x07708000 0x10000>;
reg-names = "lpass-lpaif";
@@ -594,7 +594,7 @@
reg = <0x07824900 0x11c>, <0x07824000 0x800>;
reg-names = "hc_mem", "core_mem";
- interrupts = <0 123 0>, <0 138 0>;
+ interrupts = <0 123 IRQ_TYPE_LEVEL_HIGH>, <0 138 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hc_irq", "pwr_irq";
clocks = <&gcc GCC_SDCC1_APPS_CLK>,
<&gcc GCC_SDCC1_AHB_CLK>,
@@ -611,7 +611,7 @@
reg = <0x07864900 0x11c>, <0x07864000 0x800>;
reg-names = "hc_mem", "core_mem";
- interrupts = <0 125 0>, <0 221 0>;
+ interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH>, <0 221 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hc_irq", "pwr_irq";
clocks = <&gcc GCC_SDCC2_APPS_CLK>,
<&gcc GCC_SDCC2_AHB_CLK>,
@@ -818,7 +818,7 @@
iommu-ctx@2000 {
compatible = "qcom,msm-iommu-v1-ns";
reg = <0x2000 0x1000>;
- interrupts = <GIC_SPI 242 0>;
+ interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>;
};
};
@@ -862,7 +862,7 @@
"bus_clk",
"vsync_clk";
- interrupts = <0 72 0>;
+ interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <1>;
diff --git a/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts b/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts
index 454213391671..8c69516f97ed 100644
--- a/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts
+++ b/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts
@@ -38,4 +38,21 @@
pinctrl-1 = <&blsp1_uart2_sleep>;
};
};
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ ramoops@1ff00000 {
+ compatible = "ramoops";
+ reg = <0x0 0x1ff00000 0x0 0x40000>;
+ console-size = <0x10000>;
+ record-size = <0x10000>;
+ ftrace-size = <0x10000>;
+ pmsg-size = <0x20000>;
+ };
+ };
};
+
+#include "msm8994-smd-rpm.dtsi"
diff --git a/arch/arm64/boot/dts/qcom/msm8992-pins.dtsi b/arch/arm64/boot/dts/qcom/msm8992-pins.dtsi
index d2a26f0f8d73..31bc9d98e31f 100644
--- a/arch/arm64/boot/dts/qcom/msm8992-pins.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8992-pins.dtsi
@@ -35,4 +35,64 @@
bias-pull-down;
};
};
+
+ /* 0-3 for sdc1 4-6 for sdc2 */
+ /* Order of pins */
+ /* SDC1: CLK -> 0, CMD -> 1, DATA -> 2, RCLK -> 3 */
+ /* SDC2: CLK -> 4, CMD -> 5, DATA -> 6 */
+ sdc1_clk_on: clk-on {
+ pinconf {
+ pins = "sdc1_clk";
+ bias-disable = <0>; /* No pull */
+ drive-strength = <16>; /* 16mA */
+ };
+ };
+
+ sdc1_clk_off: clk-off {
+ pinconf {
+ pins = "sdc1_clk";
+ bias-disable = <0>; /* No pull */
+ drive-strength = <2>; /* 2mA */
+ };
+ };
+
+ sdc1_cmd_on: cmd-on {
+ pinconf {
+ pins = "sdc1_cmd";
+ bias-pull-up;
+ drive-strength = <8>;
+ };
+ };
+
+ sdc1_cmd_off: cmd-off {
+ pinconf {
+ pins = "sdc1_cmd";
+ bias-pull-up = <0x3>; /* same as 3.10 ?? */
+ drive-strength = <2>; /* 2mA */
+ };
+ };
+
+ sdc1_data_on: data-on {
+ pinconf {
+ pins = "sdc1_data";
+ bias-pull-up;
+ drive-strength = <8>; /* 8mA */
+ };
+ };
+
+ sdc1_data_off: data-off {
+ pinconf {
+ pins = "sdc1_data";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+ };
+
+ sdc1_rclk_on: rclk-on {
+ bias-pull-down; /* pull down */
+ };
+
+ sdc1_rclk_off: rclk-off {
+ bias-pull-down; /* pull down */
+ };
};
diff --git a/arch/arm64/boot/dts/qcom/msm8992.dtsi b/arch/arm64/boot/dts/qcom/msm8992.dtsi
index 171578747ed0..cf5cacdd624d 100644
--- a/arch/arm64/boot/dts/qcom/msm8992.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8992.dtsi
@@ -202,6 +202,31 @@
reg = <0xfc400000 0x2000>;
};
+ sdhci1: mmc@f9824900 {
+ compatible = "qcom,sdhci-msm-v4";
+ reg = <0xf9824900 0x1a0>, <0xf9824000 0x800>;
+ reg-names = "hc_mem", "core_mem";
+
+ interrupts = <GIC_SPI 123 IRQ_TYPE_NONE>,
+ <GIC_SPI 138 IRQ_TYPE_NONE>;
+ interrupt-names = "hc_irq", "pwr_irq";
+
+ clocks = <&clock_gcc GCC_SDCC1_APPS_CLK>,
+ <&clock_gcc GCC_SDCC1_AHB_CLK>;
+ clock-names = "core", "iface";
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on
+ &sdc1_rclk_on>;
+ pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off
+ &sdc1_rclk_off>;
+
+ regulator-always-on;
+ bus-width = <8>;
+ mmc-hs400-1_8v;
+ status = "okay";
+ };
+
rpm_msg_ram: memory@fc428000 {
compatible = "qcom,rpm-msg-ram";
reg = <0xfc428000 0x4000>;
@@ -231,7 +256,67 @@
};
};
+ smd_rpm: smd {
+ compatible = "qcom,smd";
+ rpm {
+ interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+ qcom,ipc = <&apcs 8 0>;
+ qcom,smd-edge = <15>;
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <6>;
+
+ rpm-requests {
+ compatible = "qcom,rpm-msm8994";
+ qcom,smd-channels = "rpm_requests";
+
+ pm8994-regulators {
+ compatible = "qcom,rpm-pm8994-regulators";
+
+ pm8994_s1: s1 {};
+ pm8994_s2: s2 {};
+ pm8994_s3: s3 {};
+ pm8994_s4: s4 {};
+ pm8994_s5: s5 {};
+ pm8994_s6: s6 {};
+ pm8994_s7: s7 {};
+
+ pm8994_l1: l1 {};
+ pm8994_l2: l2 {};
+ pm8994_l3: l3 {};
+ pm8994_l4: l4 {};
+ pm8994_l6: l6 {};
+ pm8994_l8: l8 {};
+ pm8994_l9: l9 {};
+ pm8994_l10: l10 {};
+ pm8994_l11: l11 {};
+ pm8994_l12: l12 {};
+ pm8994_l13: l13 {};
+ pm8994_l14: l14 {};
+ pm8994_l15: l15 {};
+ pm8994_l16: l16 {};
+ pm8994_l17: l17 {};
+ pm8994_l18: l18 {};
+ pm8994_l19: l19 {};
+ pm8994_l20: l20 {};
+ pm8994_l21: l21 {};
+ pm8994_l22: l22 {};
+ pm8994_l23: l23 {};
+ pm8994_l24: l24 {};
+ pm8994_l25: l25 {};
+ pm8994_l26: l26 {};
+ pm8994_l27: l27 {};
+ pm8994_l28: l28 {};
+ pm8994_l29: l29 {};
+ pm8994_l30: l30 {};
+ pm8994_l31: l31 {};
+ pm8994_l32: l32 {};
+
+ pm8994_lvs1: lvs1 {};
+ pm8994_lvs2: lvs2 {};
+ };
+ };
+ };
+ };
};
-
#include "msm8992-pins.dtsi"
diff --git a/arch/arm64/boot/dts/qcom/msm8994-smd-rpm.dtsi b/arch/arm64/boot/dts/qcom/msm8994-smd-rpm.dtsi
new file mode 100644
index 000000000000..47ebd16cb680
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8994-smd-rpm.dtsi
@@ -0,0 +1,276 @@
+/* Copyright (c) 2015, LGE Inc. All rights reserved.
+ * Copyright (c) 2016, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+&smd_rpm {
+ rpm {
+ rpm_requests {
+ pm8994-regulators {
+
+ vdd_l1-supply = <&pm8994_s1>;
+ vdd_l2_26_28-supply = <&pm8994_s3>;
+ vdd_l3_11-supply = <&pm8994_s3>;
+ vdd_l4_27_31-supply = <&pm8994_s3>;
+ vdd_l5_7-supply = <&pm8994_s3>;
+ vdd_l6_12_32-supply = <&pm8994_s5>;
+ vdd_l8_16_30-supply = <&vreg_vph_pwr>;
+ vdd_l9_10_18_22-supply = <&vreg_vph_pwr>;
+ vdd_l13_19_23_24-supply = <&vreg_vph_pwr>;
+ vdd_l14_15-supply = <&pm8994_s5>;
+ vdd_l17_29-supply = <&vreg_vph_pwr>;
+ vdd_l20_21-supply = <&vreg_vph_pwr>;
+ vdd_l25-supply = <&pm8994_s5>;
+ vdd_lvs1_2 = <&pm8994_s4>;
+
+ s1 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <800000>;
+ };
+
+ s2 {
+ /* TODO */
+ };
+
+ s3 {
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1300000>;
+ };
+
+ s4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-allow-set-load;
+ regulator-system-load = <325000>;
+ };
+
+ s5 {
+ regulator-min-microvolt = <2150000>;
+ regulator-max-microvolt = <2150000>;
+ };
+
+ s7 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ };
+
+ l1 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ };
+
+ l2 {
+ regulator-min-microvolt = <1250000>;
+ regulator-max-microvolt = <1250000>;
+ };
+
+ l3 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ l4 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ };
+
+ l5 {
+ /* TODO */
+ };
+
+ l6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ l7 {
+ /* TODO */
+ };
+
+ l8 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ l9 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ l10 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ qcom,init-voltage = <1800000>;
+ };
+
+ l11 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ qcom,init-voltage = <1200000>;
+ };
+
+ l12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ qcom,init-voltage = <1800000>;
+ proxy-supply = <&pm8994_l12>;
+ qcom,proxy-consumer-enable;
+ qcom,proxy-consumer-current = <10000>;
+ status = "okay";
+ };
+
+ l13 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ qcom,init-voltage = <2950000>;
+ status = "okay";
+ };
+
+ l14 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ qcom,init-voltage = <1200000>;
+ proxy-supply = <&pm8994_l14>;
+ qcom,proxy-consumer-enable;
+ qcom,proxy-consumer-current = <10000>;
+ status = "okay";
+ };
+
+ l15 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ qcom,init-voltage = <1800000>;
+ status = "okay";
+ };
+
+ l16 {
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <2700000>;
+ qcom,init-voltage = <2700000>;
+ status = "okay";
+ };
+
+ l17 {
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <2700000>;
+ qcom,init-voltage = <2700000>;
+ status = "okay";
+ };
+
+ l18 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ qcom,init-voltage = <3000000>;
+ qcom,init-ldo-mode = <1>;
+ };
+
+ l19 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ qcom,init-voltage = <1800000>;
+ status = "okay";
+ };
+
+ l20 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-allow-set-load;
+ regulator-system-load = <570000>;
+ };
+
+ l21 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ qcom,init-voltage = <1800000>;
+ };
+
+ l22 {
+ regulator-min-microvolt = <3100000>;
+ regulator-max-microvolt = <3100000>;
+ qcom,init-voltage = <3100000>;
+ };
+
+ l23 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ qcom,init-voltage = <2800000>;
+ };
+
+ l24 {
+ regulator-min-microvolt = <3075000>;
+ regulator-max-microvolt = <3150000>;
+ qcom,init-voltage = <3075000>;
+ };
+
+ l25 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ qcom,init-voltage = <1800000>;
+ };
+
+ l26 {
+ /* TODO: value from downstream
+ regulator-min-microvolt = <987500>;
+ fails to apply */
+ };
+
+ l27 {
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ qcom,init-voltage = <1050000>;
+ };
+
+ l28 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ qcom,init-voltage = <1000000>;
+ proxy-supply = <&pm8994_l28>;
+ qcom,proxy-consumer-enable;
+ qcom,proxy-consumer-current = <10000>;
+ };
+
+ l29 {
+ /* TODO: Unsupported voltage range.
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ qcom,init-voltage = <2800000>;
+ */
+ };
+
+ l30 {
+ /* TODO: get this verified
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ qcom,init-voltage = <1800000>;
+ */
+ };
+
+ l31 {
+ regulator-min-microvolt = <1262500>;
+ regulator-max-microvolt = <1262500>;
+ qcom,init-voltage = <1262500>;
+ };
+
+ l32 {
+ /* TODO: get this verified
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ qcom,init-voltage = <1800000>;
+ */
+ };
+ };
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index f8e49d0b4681..8c7f9ca25b53 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -447,7 +447,7 @@
blsp2_i2c0: i2c@75b5000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x075b5000 0x1000>;
- interrupts = <GIC_SPI 101 0>;
+ interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP2_AHB_CLK>,
<&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>;
clock-names = "iface", "core";
@@ -478,7 +478,7 @@
blsp2_i2c1: i2c@75b6000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x075b6000 0x1000>;
- interrupts = <GIC_SPI 102 0>;
+ interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP2_AHB_CLK>,
<&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>;
clock-names = "iface", "core";
@@ -503,7 +503,7 @@
blsp1_i2c2: i2c@7577000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x07577000 0x1000>;
- interrupts = <GIC_SPI 97 0>;
+ interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_AHB_CLK>,
<&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>;
clock-names = "iface", "core";
@@ -536,7 +536,8 @@
reg = <0x74a4900 0x314>, <0x74a4000 0x800>;
reg-names = "hc_mem", "core_mem";
- interrupts = <0 125 0>, <0 221 0>;
+ interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH>,
+ <0 221 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hc_irq", "pwr_irq";
clock-names = "iface", "core", "xo";
@@ -633,6 +634,91 @@
#interrupt-cells = <4>;
};
+ ufsphy: phy@627000 {
+ compatible = "qcom,msm8996-ufs-phy-qmp-14nm";
+ reg = <0x627000 0xda8>;
+ reg-names = "phy_mem";
+ #phy-cells = <0>;
+
+ vdda-phy-supply = <&pm8994_l28>;
+ vdda-pll-supply = <&pm8994_l12>;
+
+ vdda-phy-max-microamp = <18380>;
+ vdda-pll-max-microamp = <9440>;
+
+ vddp-ref-clk-supply = <&pm8994_l25>;
+ vddp-ref-clk-max-microamp = <100>;
+ vddp-ref-clk-always-on;
+
+ clock-names = "ref_clk_src", "ref_clk";
+ clocks = <&rpmcc RPM_SMD_LN_BB_CLK>,
+ <&gcc GCC_UFS_CLKREF_CLK>;
+ status = "disabled";
+ };
+
+ ufshc@624000 {
+ compatible = "qcom,ufshc";
+ reg = <0x624000 0x2500>;
+ interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+
+ phys = <&ufsphy>;
+ phy-names = "ufsphy";
+
+ vcc-supply = <&pm8994_l20>;
+ vccq-supply = <&pm8994_l25>;
+ vccq2-supply = <&pm8994_s4>;
+
+ vcc-max-microamp = <600000>;
+ vccq-max-microamp = <450000>;
+ vccq2-max-microamp = <450000>;
+
+ power-domains = <&gcc UFS_GDSC>;
+
+ clock-names =
+ "core_clk_src",
+ "core_clk",
+ "bus_clk",
+ "bus_aggr_clk",
+ "iface_clk",
+ "core_clk_unipro_src",
+ "core_clk_unipro",
+ "core_clk_ice",
+ "ref_clk",
+ "tx_lane0_sync_clk",
+ "rx_lane0_sync_clk";
+ clocks =
+ <&gcc UFS_AXI_CLK_SRC>,
+ <&gcc GCC_UFS_AXI_CLK>,
+ <&gcc GCC_SYS_NOC_UFS_AXI_CLK>,
+ <&gcc GCC_AGGRE2_UFS_AXI_CLK>,
+ <&gcc GCC_UFS_AHB_CLK>,
+ <&gcc UFS_ICE_CORE_CLK_SRC>,
+ <&gcc GCC_UFS_UNIPRO_CORE_CLK>,
+ <&gcc GCC_UFS_ICE_CORE_CLK>,
+ <&rpmcc RPM_SMD_LN_BB_CLK>,
+ <&gcc GCC_UFS_TX_SYMBOL_0_CLK>,
+ <&gcc GCC_UFS_RX_SYMBOL_0_CLK>;
+ freq-table-hz =
+ <100000000 200000000>,
+ <0 0>,
+ <0 0>,
+ <0 0>,
+ <0 0>,
+ <150000000 300000000>,
+ <0 0>,
+ <0 0>,
+ <0 0>,
+ <0 0>,
+ <0 0>;
+
+ lanes-per-direction = <1>;
+ status = "disabled";
+
+ ufs_variant {
+ compatible = "qcom,ufs_variant";
+ };
+ };
+
mmcc: clock-controller@8c0000 {
compatible = "qcom,mmcc-msm8996";
#clock-cells = <1>;
@@ -819,7 +905,7 @@
dwc3@7600000 {
compatible = "snps,dwc3";
reg = <0x7600000 0xcc00>;
- interrupts = <0 138 0>;
+ interrupts = <0 138 IRQ_TYPE_LEVEL_HIGH>;
phys = <&hsusb_phy2>;
phy-names = "usb2-phy";
};
@@ -848,7 +934,7 @@
dwc3@6a00000 {
compatible = "snps,dwc3";
reg = <0x6a00000 0xcc00>;
- interrupts = <0 131 0>;
+ interrupts = <0 131 IRQ_TYPE_LEVEL_HIGH>;
phys = <&hsusb_phy1>, <&ssusb_phy_0>;
phy-names = "usb2-phy", "usb3-phy";
};
@@ -861,7 +947,7 @@
#size-cells = <1>;
ranges;
- pcie0: qcom,pcie@600000 {
+ pcie0: pcie@600000 {
compatible = "qcom,pcie-msm8996", "snps,dw-pcie";
status = "disabled";
power-domains = <&gcc PCIE0_GDSC>;
@@ -882,7 +968,7 @@
ranges = <0x01000000 0x0 0x0c200000 0x0c200000 0x0 0x100000>,
<0x02000000 0x0 0x0c300000 0x0c300000 0x0 0xd00000>;
- interrupts = <GIC_SPI 405 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "msi";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
@@ -914,7 +1000,7 @@
};
- pcie1: qcom,pcie@608000 {
+ pcie1: pcie@608000 {
compatible = "qcom,pcie-msm8996", "snps,dw-pcie";
power-domains = <&gcc PCIE1_GDSC>;
bus-range = <0x00 0xff>;
@@ -937,7 +1023,7 @@
ranges = <0x01000000 0x0 0x0d200000 0x0d200000 0x0 0x100000>,
<0x02000000 0x0 0x0d300000 0x0d300000 0x0 0xd00000>;
- interrupts = <GIC_SPI 413 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "msi";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
@@ -967,7 +1053,7 @@
"bus_slave";
};
- pcie2: qcom,pcie@610000 {
+ pcie2: pcie@610000 {
compatible = "qcom,pcie-msm8996", "snps,dw-pcie";
power-domains = <&gcc PCIE2_GDSC>;
bus-range = <0x00 0xff>;
@@ -990,7 +1076,7 @@
device_type = "pci";
- interrupts = <GIC_SPI 421 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "msi";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
diff --git a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
new file mode 100644
index 000000000000..979ab49913f1
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * SDM845 MTP board device tree source
+ *
+ * Copyright (c) 2018, The Linux Foundation. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "sdm845.dtsi"
+
+/ {
+ model = "Qualcomm Technologies, Inc. SDM845 MTP";
+ compatible = "qcom,sdm845-mtp";
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
new file mode 100644
index 000000000000..cdaabeb3c995
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -0,0 +1,327 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * SDM845 SoC device tree source
+ *
+ * Copyright (c) 2018, The Linux Foundation. All rights reserved.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ interrupt-parent = <&intc>;
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ chosen { };
+
+ memory@80000000 {
+ device_type = "memory";
+ /* We expect the bootloader to fill in the size */
+ reg = <0 0x80000000 0 0>;
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ memory@85fc0000 {
+ reg = <0 0x85fc0000 0 0x20000>;
+ no-map;
+ };
+
+ memory@85fe0000 {
+ compatible = "qcom,cmd-db";
+ reg = <0x0 0x85fe0000 0x0 0x20000>;
+ no-map;
+ };
+
+ smem_mem: memory@86000000 {
+ reg = <0x0 0x86000000 0x0 0x200000>;
+ no-map;
+ };
+
+ memory@86200000 {
+ reg = <0 0x86200000 0 0x2d00000>;
+ no-map;
+ };
+ };
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ CPU0: cpu@0 {
+ device_type = "cpu";
+ compatible = "qcom,kryo385";
+ reg = <0x0 0x0>;
+ enable-method = "psci";
+ next-level-cache = <&L2_0>;
+ L2_0: l2-cache {
+ compatible = "cache";
+ next-level-cache = <&L3_0>;
+ L3_0: l3-cache {
+ compatible = "cache";
+ };
+ };
+ };
+
+ CPU1: cpu@100 {
+ device_type = "cpu";
+ compatible = "qcom,kryo385";
+ reg = <0x0 0x100>;
+ enable-method = "psci";
+ next-level-cache = <&L2_100>;
+ L2_100: l2-cache {
+ compatible = "cache";
+ next-level-cache = <&L3_0>;
+ };
+ };
+
+ CPU2: cpu@200 {
+ device_type = "cpu";
+ compatible = "qcom,kryo385";
+ reg = <0x0 0x200>;
+ enable-method = "psci";
+ next-level-cache = <&L2_200>;
+ L2_200: l2-cache {
+ compatible = "cache";
+ next-level-cache = <&L3_0>;
+ };
+ };
+
+ CPU3: cpu@300 {
+ device_type = "cpu";
+ compatible = "qcom,kryo385";
+ reg = <0x0 0x300>;
+ enable-method = "psci";
+ next-level-cache = <&L2_300>;
+ L2_300: l2-cache {
+ compatible = "cache";
+ next-level-cache = <&L3_0>;
+ };
+ };
+
+ CPU4: cpu@400 {
+ device_type = "cpu";
+ compatible = "qcom,kryo385";
+ reg = <0x0 0x400>;
+ enable-method = "psci";
+ next-level-cache = <&L2_400>;
+ L2_400: l2-cache {
+ compatible = "cache";
+ next-level-cache = <&L3_0>;
+ };
+ };
+
+ CPU5: cpu@500 {
+ device_type = "cpu";
+ compatible = "qcom,kryo385";
+ reg = <0x0 0x500>;
+ enable-method = "psci";
+ next-level-cache = <&L2_500>;
+ L2_500: l2-cache {
+ compatible = "cache";
+ next-level-cache = <&L3_0>;
+ };
+ };
+
+ CPU6: cpu@600 {
+ device_type = "cpu";
+ compatible = "qcom,kryo385";
+ reg = <0x0 0x600>;
+ enable-method = "psci";
+ next-level-cache = <&L2_600>;
+ L2_600: l2-cache {
+ compatible = "cache";
+ next-level-cache = <&L3_0>;
+ };
+ };
+
+ CPU7: cpu@700 {
+ device_type = "cpu";
+ compatible = "qcom,kryo385";
+ reg = <0x0 0x700>;
+ enable-method = "psci";
+ next-level-cache = <&L2_700>;
+ L2_700: l2-cache {
+ compatible = "cache";
+ next-level-cache = <&L3_0>;
+ };
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 1 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 2 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 3 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 0 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ clocks {
+ xo_board: xo-board {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <38400000>;
+ clock-output-names = "xo_board";
+ };
+
+ sleep_clk: sleep-clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32764>;
+ };
+ };
+
+ tcsr_mutex: hwlock {
+ compatible = "qcom,tcsr-mutex";
+ syscon = <&tcsr_mutex_regs 0 0x1000>;
+ #hwlock-cells = <1>;
+ };
+
+ smem {
+ compatible = "qcom,smem";
+ memory-region = <&smem_mem>;
+ hwlocks = <&tcsr_mutex 3>;
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+
+ soc: soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0 0xffffffff>;
+ compatible = "simple-bus";
+
+ gcc: clock-controller@100000 {
+ compatible = "qcom,gcc-sdm845";
+ reg = <0x100000 0x1f0000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+
+ tcsr_mutex_regs: syscon@1f40000 {
+ compatible = "syscon";
+ reg = <0x1f40000 0x40000>;
+ };
+
+ tlmm: pinctrl@3400000 {
+ compatible = "qcom,sdm845-pinctrl";
+ reg = <0x03400000 0xc00000>;
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ spmi_bus: spmi@c440000 {
+ compatible = "qcom,spmi-pmic-arb";
+ reg = <0xc440000 0x1100>,
+ <0xc600000 0x2000000>,
+ <0xe600000 0x100000>,
+ <0xe700000 0xa0000>,
+ <0xc40a000 0x26000>;
+ reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+ interrupt-names = "periph_irq";
+ interrupts = <GIC_SPI 481 IRQ_TYPE_LEVEL_HIGH>;
+ qcom,ee = <0>;
+ qcom,channel = <0>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+ interrupt-controller;
+ #interrupt-cells = <4>;
+ cell-index = <0>;
+ };
+
+ apss_shared: mailbox@17990000 {
+ compatible = "qcom,sdm845-apss-shared";
+ reg = <0x17990000 0x1000>;
+ #mbox-cells = <1>;
+ };
+
+ intc: interrupt-controller@17a00000 {
+ compatible = "arm,gic-v3";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0x17a00000 0x10000>, /* GICD */
+ <0x17a60000 0x100000>; /* GICR * 8 */
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+ gic-its@17a40000 {
+ compatible = "arm,gic-v3-its";
+ msi-controller;
+ #msi-cells = <1>;
+ reg = <0x17a40000 0x20000>;
+ status = "disabled";
+ };
+ };
+
+ timer@17c90000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ compatible = "arm,armv7-timer-mem";
+ reg = <0x17c90000 0x1000>;
+
+ frame@17ca0000 {
+ frame-number = <0>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x17ca0000 0x1000>,
+ <0x17cb0000 0x1000>;
+ };
+
+ frame@17cc0000 {
+ frame-number = <1>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x17cc0000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@17cd0000 {
+ frame-number = <2>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x17cd0000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@17ce0000 {
+ frame-number = <3>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x17ce0000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@17cf0000 {
+ frame-number = <4>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x17cf0000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@17d00000 {
+ frame-number = <5>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x17d00000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@17d10000 {
+ frame-number = <6>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x17d10000 0x1000>;
+ status = "disabled";
+ };
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
index be2bfbc6b483..b8e9da15e00c 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
@@ -595,6 +595,8 @@
reg = <0x0 0xff330200 0 0x100>;
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "h265e_mmu";
+ clocks = <&cru ACLK_H265>, <&cru PCLK_H265>;
+ clock-names = "aclk", "iface";
#iommu-cells = <0>;
status = "disabled";
};
@@ -604,6 +606,8 @@
reg = <0x0 0xff340800 0x0 0x40>;
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "vepu_mmu";
+ clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>;
+ clock-names = "aclk", "iface";
#iommu-cells = <0>;
status = "disabled";
};
@@ -613,6 +617,8 @@
reg = <0x0 0xff350800 0x0 0x40>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "vpu_mmu";
+ clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>;
+ clock-names = "aclk", "iface";
#iommu-cells = <0>;
status = "disabled";
};
@@ -622,6 +628,8 @@
reg = <0x0 0xff360480 0x0 0x40>, <0x0 0xff3604c0 0x0 0x40>;
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "rkvdec_mmu";
+ clocks = <&cru ACLK_RKVDEC>, <&cru HCLK_RKVDEC>;
+ clock-names = "aclk", "iface";
#iommu-cells = <0>;
status = "disabled";
};
@@ -631,6 +639,8 @@
reg = <0x0 0xff373f00 0x0 0x100>;
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "vop_mmu";
+ clocks = <&cru ACLK_VOP>, <&cru HCLK_VOP>;
+ clock-names = "aclk", "iface";
#iommu-cells = <0>;
status = "disabled";
};
diff --git a/arch/arm64/boot/dts/rockchip/rk3368.dtsi b/arch/arm64/boot/dts/rockchip/rk3368.dtsi
index 03458ac44201..ad91ced78649 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3368.dtsi
@@ -742,6 +742,8 @@
reg = <0x0 0xff900800 0x0 0x100>;
interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "iep_mmu";
+ clocks = <&cru ACLK_IEP>, <&cru HCLK_IEP>;
+ clock-names = "aclk", "iface";
#iommu-cells = <0>;
status = "disabled";
};
@@ -752,6 +754,8 @@
<0x0 0xff915000 0x0 0x100>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "isp_mmu";
+ clocks = <&cru ACLK_ISP>, <&cru HCLK_ISP>;
+ clock-names = "aclk", "iface";
#iommu-cells = <0>;
rockchip,disable-mmu-reset;
status = "disabled";
@@ -762,6 +766,8 @@
reg = <0x0 0xff930300 0x0 0x100>;
interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "vop_mmu";
+ clocks = <&cru ACLK_VOP>, <&cru HCLK_VOP>;
+ clock-names = "aclk", "iface";
#iommu-cells = <0>;
status = "disabled";
};
@@ -772,6 +778,8 @@
<0x0 0xff9a0480 0x0 0x40>;
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hevc_mmu";
+ clocks = <&cru ACLK_VIDEO>, <&cru HCLK_VIDEO>;
+ clock-names = "aclk", "iface";
#iommu-cells = <0>;
status = "disabled";
};
@@ -782,6 +790,8 @@
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "vepu_mmu", "vdpu_mmu";
+ clocks = <&cru ACLK_VIDEO>, <&cru HCLK_VIDEO>;
+ clock-names = "aclk", "iface";
#iommu-cells = <0>;
status = "disabled";
};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts b/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts
index 4f28628aa091..2a352763c848 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts
@@ -662,6 +662,14 @@
status = "okay";
};
+&tcphy0 {
+ status = "okay";
+};
+
+&tcphy1 {
+ status = "okay";
+};
+
&tsadc {
/* tshut mode 0:CRU 1:GPIO */
rockchip,hw-tshut-mode = <1>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts b/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts
index 191a6bcb1704..82179125bfb7 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts
@@ -255,7 +255,7 @@ ap_i2c_dig: &i2c2 {
&ap_i2c_tp {
trackpad@4a {
- compatible = "atmel,atmel_mxt_tp";
+ compatible = "atmel,maxtouch";
reg = <0x4a>;
pinctrl-names = "default";
pinctrl-0 = <&trackpad_int_l>;
@@ -271,7 +271,7 @@ ap_i2c_dig: &i2c2 {
&ap_i2c_ts {
touchscreen@4b {
- compatible = "atmel,atmel_mxt_ts";
+ compatible = "atmel,maxtouch";
reg = <0x4b>;
pinctrl-names = "default";
pinctrl-0 = <&touch_int_l>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
index 18f546f2dfd1..f49bfab75dd0 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
@@ -588,7 +588,9 @@
<&cru ACLK_PERILP0>, <&cru HCLK_PERILP0>,
<&cru PCLK_PERILP0>, <&cru ACLK_CCI>,
<&cru HCLK_PERILP1>, <&cru PCLK_PERILP1>,
- <&cru ACLK_VIO>;
+ <&cru ACLK_VIO>, <&cru ACLK_HDCP>,
+ <&cru ACLK_GIC_PRE>,
+ <&cru PCLK_DDR>;
assigned-clock-rates =
<600000000>, <800000000>,
<1000000000>,
@@ -597,7 +599,9 @@
<100000000>, <100000000>,
<50000000>, <800000000>,
<100000000>, <50000000>,
- <400000000>;
+ <400000000>, <400000000>,
+ <200000000>,
+ <200000000>;
};
&emmc_phy {
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts b/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts
index 7d3e8bfd51dd..e0afdd8b62bd 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts
@@ -143,6 +143,11 @@
};
};
+&hdmi {
+ ddc-i2c-bus = <&i2c3>;
+ status = "okay";
+};
+
&i2c1 {
status = "okay";
clock-frequency = <400000>;
@@ -246,6 +251,10 @@
status = "okay";
};
+&tcphy0 {
+ status = "okay";
+};
+
&u2phy0 {
status = "okay";
};
@@ -281,3 +290,19 @@
&usb_host0_ohci {
status = "okay";
};
+
+&vopb {
+ status = "okay";
+};
+
+&vopb_mmu {
+ status = "okay";
+};
+
+&vopl {
+ status = "okay";
+};
+
+&vopl_mmu {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
index 4a2d06abe9c1..14a0f1998639 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
@@ -527,6 +527,10 @@
};
};
+&tcphy1 {
+ status = "okay";
+};
+
&tsadc {
rockchip,hw-tshut-mode = <1>;
rockchip,hw-tshut-polarity = <1>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts b/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts
index 56952d1a3fb8..ad7548d3b93d 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts
@@ -190,6 +190,18 @@
status = "okay";
};
+&pcie_phy {
+ status = "okay";
+};
+
+&pcie0 {
+ ep-gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_HIGH>;
+ num-lanes = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie_clkreqn_cpm>;
+ status = "okay";
+};
+
&pinctrl {
sdio-pwrseq {
wifi_enable_h: wifi-enable-h {
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi
index e5daed7d2026..941b627094d7 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi
@@ -471,21 +471,6 @@
gpio1830-supply = <&vcc_3v0>;
};
-&pcie_phy {
- status = "okay";
-};
-
-&pcie0 {
- assigned-clocks = <&cru SCLK_PCIEPHY_REF>;
- assigned-clock-parents = <&cru SCLK_PCIEPHY_REF100M>;
- assigned-clock-rates = <100000000>;
- ep-gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_HIGH>;
- num-lanes = <4>;
- pinctrl-names = "default";
- pinctrl-0 = <&pcie_clkreqn_cpm>;
- status = "okay";
-};
-
&pmu_io_domains {
pmu1830-supply = <&vcc_3v0>;
status = "okay";
@@ -560,6 +545,14 @@
status = "okay";
};
+&tcphy0 {
+ status = "okay";
+};
+
+&tcphy1 {
+ status = "okay";
+};
+
&tsadc {
/* tshut mode 0:CRU 1:GPIO */
rockchip,hw-tshut-mode = <1>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index 4550c0f82be9..e0040b648f43 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -312,6 +312,8 @@
reg = <0x0 0xfe320000 0x0 0x4000>;
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH 0>;
max-frequency = <150000000>;
+ assigned-clocks = <&cru HCLK_SD>;
+ assigned-clock-rates = <200000000>;
clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
<&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
@@ -411,8 +413,8 @@
reg = <0x0 0xfe800000 0x0 0x100000>;
interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH 0>;
dr_mode = "otg";
- phys = <&u2phy0_otg>;
- phy-names = "usb2-phy";
+ phys = <&u2phy0_otg>, <&tcphy0_usb3>;
+ phy-names = "usb2-phy", "usb3-phy";
phy_type = "utmi_wide";
snps,dis_enblslpm_quirk;
snps,dis-u2-freeclk-exists-quirk;
@@ -444,8 +446,8 @@
reg = <0x0 0xfe900000 0x0 0x100000>;
interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH 0>;
dr_mode = "otg";
- phys = <&u2phy1_otg>;
- phy-names = "usb2-phy";
+ phys = <&u2phy1_otg>, <&tcphy1_usb3>;
+ phy-names = "usb2-phy", "usb3-phy";
phy_type = "utmi_wide";
snps,dis_enblslpm_quirk;
snps,dis-u2-freeclk-exists-quirk;
@@ -461,8 +463,8 @@
compatible = "rockchip,rk3399-cdn-dp";
reg = <0x0 0xfec00000 0x0 0x100000>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH 0>;
- assigned-clocks = <&cru SCLK_DP_CORE>;
- assigned-clock-rates = <100000000>;
+ assigned-clocks = <&cru SCLK_DP_CORE>, <&cru SCLK_SPDIF_REC_DPTX>;
+ assigned-clock-rates = <100000000>, <200000000>;
clocks = <&cru SCLK_DP_CORE>, <&cru PCLK_DP_CTRL>,
<&cru SCLK_SPDIF_REC_DPTX>, <&cru PCLK_VIO_GRF>;
clock-names = "core-clk", "pclk", "spdif", "grf";
@@ -1234,6 +1236,8 @@
reg = <0x0 0xff650800 0x0 0x40>;
interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH 0>;
interrupt-names = "vpu_mmu";
+ clocks = <&cru ACLK_VCODEC>, <&cru HCLK_VCODEC>;
+ clock-names = "aclk", "iface";
#iommu-cells = <0>;
status = "disabled";
};
@@ -1243,6 +1247,8 @@
reg = <0x0 0xff660480 0x0 0x40>, <0x0 0xff6604c0 0x0 0x40>;
interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH 0>;
interrupt-names = "vdec_mmu";
+ clocks = <&cru ACLK_VDU>, <&cru HCLK_VDU>;
+ clock-names = "aclk", "iface";
#iommu-cells = <0>;
status = "disabled";
};
@@ -1252,6 +1258,8 @@
reg = <0x0 0xff670800 0x0 0x40>;
interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH 0>;
interrupt-names = "iep_mmu";
+ clocks = <&cru ACLK_IEP>, <&cru HCLK_IEP>;
+ clock-names = "aclk", "iface";
#iommu-cells = <0>;
status = "disabled";
};
@@ -1323,7 +1331,9 @@
<&cru ACLK_PERILP0>, <&cru HCLK_PERILP0>,
<&cru PCLK_PERILP0>, <&cru ACLK_CCI>,
<&cru HCLK_PERILP1>, <&cru PCLK_PERILP1>,
- <&cru ACLK_VIO>;
+ <&cru ACLK_VIO>, <&cru ACLK_HDCP>,
+ <&cru ACLK_GIC_PRE>,
+ <&cru PCLK_DDR>;
assigned-clock-rates =
<594000000>, <800000000>,
<1000000000>,
@@ -1332,7 +1342,9 @@
<100000000>, <100000000>,
<50000000>, <600000000>,
<100000000>, <50000000>,
- <400000000>;
+ <400000000>, <400000000>,
+ <200000000>,
+ <200000000>;
};
grf: syscon@ff770000 {
@@ -1599,7 +1611,7 @@
interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH 0>;
interrupt-names = "vopl_mmu";
clocks = <&cru ACLK_VOP1>, <&cru HCLK_VOP1>;
- clock-names = "aclk", "hclk";
+ clock-names = "aclk", "iface";
power-domains = <&power RK3399_PD_VOPL>;
#iommu-cells = <0>;
status = "disabled";
@@ -1656,7 +1668,7 @@
interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH 0>;
interrupt-names = "vopb_mmu";
clocks = <&cru ACLK_VOP0>, <&cru HCLK_VOP0>;
- clock-names = "aclk", "hclk";
+ clock-names = "aclk", "iface";
power-domains = <&power RK3399_PD_VOPB>;
#iommu-cells = <0>;
status = "disabled";
@@ -1667,6 +1679,8 @@
reg = <0x0 0xff914000 0x0 0x100>, <0x0 0xff915000 0x0 0x100>;
interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH 0>;
interrupt-names = "isp0_mmu";
+ clocks = <&cru ACLK_ISP0_NOC>, <&cru HCLK_ISP0_NOC>;
+ clock-names = "aclk", "iface";
#iommu-cells = <0>;
rockchip,disable-mmu-reset;
status = "disabled";
@@ -1677,6 +1691,8 @@
reg = <0x0 0xff924000 0x0 0x100>, <0x0 0xff925000 0x0 0x100>;
interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH 0>;
interrupt-names = "isp1_mmu";
+ clocks = <&cru ACLK_ISP1_NOC>, <&cru HCLK_ISP1_NOC>;
+ clock-names = "aclk", "iface";
#iommu-cells = <0>;
rockchip,disable-mmu-reset;
status = "disabled";
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi
index c32dd3419c87..d63b56e944de 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi
@@ -549,10 +549,13 @@
status = "disabled";
reg = <0x65000000 0x8500>;
interrupts = <0 66 4>;
+ clock-names = "ether";
clocks = <&sys_clk 6>;
+ reset-names = "ether";
resets = <&sys_rst 6>;
- phy-mode = "rmii";
+ phy-mode = "internal";
local-mac-address = [00 00 00 00 00 00];
+ socionext,syscon-phy-mode = <&soc_glue 0>;
mdio: mdio {
#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
index 3a5ed789c056..0298bd0d0e1a 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
@@ -604,10 +604,13 @@
interrupts = <0 66 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ether_rgmii>;
+ clock-names = "ether";
clocks = <&sys_clk 6>;
+ reset-names = "ether";
resets = <&sys_rst 6>;
phy-mode = "rgmii";
local-mac-address = [00 00 00 00 00 00];
+ socionext,syscon-phy-mode = <&soc_glue 0>;
mdio: mdio {
#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi b/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi
index e85d6ddea3c2..2a4cf427f5d3 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi
+++ b/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi
@@ -341,7 +341,7 @@
cdns,phy-dll-delay-sdclk-hsmmc = <21>;
};
- soc-glue@5f800000 {
+ soc_glue: soc-glue@5f800000 {
compatible = "socionext,uniphier-pxs3-soc-glue",
"simple-mfd", "syscon";
reg = <0x5f800000 0x2000>;
@@ -412,10 +412,13 @@
interrupts = <0 66 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ether_rgmii>;
+ clock-names = "ether";
clocks = <&sys_clk 6>;
+ reset-names = "ether";
resets = <&sys_rst 6>;
phy-mode = "rgmii";
local-mac-address = [00 00 00 00 00 00];
+ socionext,syscon-phy-mode = <&soc_glue 0>;
mdio0: mdio {
#address-cells = <1>;
@@ -430,10 +433,13 @@
interrupts = <0 67 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ether1_rgmii>;
+ clock-names = "ether";
clocks = <&sys_clk 7>;
+ reset-names = "ether";
resets = <&sys_rst 7>;
phy-mode = "rgmii";
local-mac-address = [00 00 00 00 00 00];
+ socionext,syscon-phy-mode = <&soc_glue 1>;
mdio1: mdio {
#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/sprd/sc2731.dtsi b/arch/arm64/boot/dts/sprd/sc2731.dtsi
index 4331006185bf..98d3b4fdb9ad 100644
--- a/arch/arm64/boot/dts/sprd/sc2731.dtsi
+++ b/arch/arm64/boot/dts/sprd/sc2731.dtsi
@@ -24,6 +24,17 @@
interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
};
+ pmic_eic: gpio@300 {
+ compatible = "sprd,sc27xx-eic";
+ reg = <0x300>;
+ interrupt-parent = <&sc2731_pmic>;
+ interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
regulators {
compatible = "sprd,sc27xx-regulator";
diff --git a/arch/arm64/boot/dts/sprd/sc9860.dtsi b/arch/arm64/boot/dts/sprd/sc9860.dtsi
index 5dbfb796d9f9..3f5160d2f130 100644
--- a/arch/arm64/boot/dts/sprd/sc9860.dtsi
+++ b/arch/arm64/boot/dts/sprd/sc9860.dtsi
@@ -7,6 +7,8 @@
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
#include "whale2.dtsi"
/ {
@@ -326,7 +328,7 @@
reg = <4>;
soc_funnel_in_port1: endpoint {
slave-mode;
- remote-endpioint =
+ remote-endpoint =
<&stm_out_port>;
};
};
@@ -679,5 +681,33 @@
};
};
};
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ key-volumedown {
+ label = "Volume Down Key";
+ linux,code = <KEY_VOLUMEDOWN>;
+ gpios = <&eic_debounce 2 GPIO_ACTIVE_LOW>;
+ debounce-interval = <2>;
+ wakeup-source;
+ };
+
+ key-volumeup {
+ label = "Volume Up Key";
+ linux,code = <KEY_VOLUMEUP>;
+ gpios = <&pmic_eic 10 GPIO_ACTIVE_HIGH>;
+ debounce-interval = <2>;
+ wakeup-source;
+ };
+
+ key-power {
+ label = "Power Key";
+ linux,code = <KEY_POWER>;
+ gpios = <&pmic_eic 1 GPIO_ACTIVE_HIGH>;
+ debounce-interval = <2>;
+ wakeup-source;
+ };
+ };
};
};
diff --git a/arch/arm64/boot/dts/sprd/whale2.dtsi b/arch/arm64/boot/dts/sprd/whale2.dtsi
index 66a881e6da92..e9db9108f3c0 100644
--- a/arch/arm64/boot/dts/sprd/whale2.dtsi
+++ b/arch/arm64/boot/dts/sprd/whale2.dtsi
@@ -154,6 +154,56 @@
clocks = <&aon_gate CLK_SPLK_EB>;
};
+ eic_debounce: gpio@40210000 {
+ compatible = "sprd,sc9860-eic-debounce";
+ reg = <0 0x40210000 0 0x80>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ eic_latch: gpio@40210080 {
+ compatible = "sprd,sc9860-eic-latch";
+ reg = <0 0x40210080 0 0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ eic_async: gpio@402100a0 {
+ compatible = "sprd,sc9860-eic-async";
+ reg = <0 0x402100a0 0 0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ eic_sync: gpio@402100c0 {
+ compatible = "sprd,sc9860-eic-sync";
+ reg = <0 0x402100c0 0 0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ ap_gpio: gpio@40280000 {
+ compatible = "sprd,sc9860-gpio";
+ reg = <0 0x40280000 0 0x1000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
pin_controller: pinctrl@402a0000 {
compatible = "sprd,sc9860-pinctrl";
reg = <0 0x402a0000 0 0x10000>;
@@ -164,8 +214,9 @@
reg = <0 0x40310000 0 0x1000>;
interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
timeout-sec = <12>;
- clock-names = "enable";
- clocks = <&aon_gate CLK_APCPU_WDG_EB>;
+ clock-names = "enable", "rtc_enable";
+ clocks = <&aon_gate CLK_APCPU_WDG_EB>,
+ <&aon_gate CLK_AP_WDG_RTC_EB>;
};
};
diff --git a/arch/arm64/boot/dts/synaptics/Makefile b/arch/arm64/boot/dts/synaptics/Makefile
new file mode 100644
index 000000000000..de71ddda6835
--- /dev/null
+++ b/arch/arm64/boot/dts/synaptics/Makefile
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0
+# Berlin SoC Family
+dtb-$(CONFIG_ARCH_BERLIN) += berlin4ct-dmp.dtb
+dtb-$(CONFIG_ARCH_BERLIN) += berlin4ct-stb.dtb
diff --git a/arch/arm64/boot/dts/synaptics/berlin4ct-dmp.dts b/arch/arm64/boot/dts/synaptics/berlin4ct-dmp.dts
new file mode 100644
index 000000000000..c64a179ebbb7
--- /dev/null
+++ b/arch/arm64/boot/dts/synaptics/berlin4ct-dmp.dts
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2015 Marvell Technology Group Ltd.
+ *
+ * Author: Jisheng Zhang <jszhang@marvell.com>
+ */
+
+/dts-v1/;
+
+#include "berlin4ct.dtsi"
+
+/ {
+ model = "Marvell BG4CT DMP board";
+ compatible = "marvell,berlin4ct-dmp", "marvell,berlin4ct", "marvell,berlin";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@1000000 {
+ device_type = "memory";
+ /* the first 16MB is for firmwares' usage */
+ reg = <0 0x01000000 0 0x7f000000>;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/synaptics/berlin4ct-stb.dts b/arch/arm64/boot/dts/synaptics/berlin4ct-stb.dts
new file mode 100644
index 000000000000..277dccfa05cb
--- /dev/null
+++ b/arch/arm64/boot/dts/synaptics/berlin4ct-stb.dts
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2015 Marvell Technology Group Ltd.
+ *
+ * Author: Jisheng Zhang <jszhang@marvell.com>
+ */
+
+/dts-v1/;
+
+#include "berlin4ct.dtsi"
+
+/ {
+ model = "Marvell BG4CT STB board";
+ compatible = "marvell,berlin4ct-stb", "marvell,berlin4ct", "marvell,berlin";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@1000000 {
+ device_type = "memory";
+ /* the first 16MB is for firmwares' usage */
+ reg = <0 0x01000000 0 0x7f000000>;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/marvell/berlin4ct.dtsi b/arch/arm64/boot/dts/synaptics/berlin4ct.dtsi
index d2f88b92d8e2..216767e2edf6 100644
--- a/arch/arm64/boot/dts/marvell/berlin4ct.dtsi
+++ b/arch/arm64/boot/dts/synaptics/berlin4ct.dtsi
@@ -1,45 +1,8 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
/*
* Copyright (C) 2015 Marvell Technology Group Ltd.
*
* Author: Jisheng Zhang <jszhang@marvell.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPLv2 or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>