m32r: Rename STI/CLI macros

The names of STI and CLI macros were derived from i386 arch historically,
but their name are incomprehensible.
So, for easy to understand, rename these macros to ENABLE_INTERRUPTS
and DISABLE_INTERRUPTS, respectively.

Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>

2 files changed, 16 insertions, 16 deletions

diff --git a/arch/m32r/kernel/entry.S b/arch/m32r/kernel/entry.S
index 42b08bfd46fe..d4eaa2fd1818 100644
--- a/arch/m32r/kernel/entry.S
+++ b/arch/m32r/kernel/entry.S
@@ -112,7 +112,7 @@
 #define nr_syscalls ((syscall_table_size)/4)
 
 #ifdef CONFIG_PREEMPT
-#define preempt_stop(x)		CLI(x)
+#define preempt_stop(x)		DISABLE_INTERRUPTS(x)
 #else
 #define preempt_stop(x)
 #define resume_kernel		restore_all
@@ -144,7 +144,7 @@ ret_from_intr:
 #endif
 	beqz	r4, resume_kernel
 ENTRY(resume_userspace)
-	CLI(r4)				; make sure we don't miss an interrupt
+	DISABLE_INTERRUPTS(r4)		; make sure we don't miss an interrupt
 					; setting need_resched or sigpending
 					; between sampling and the iret
 	GET_THREAD_INFO(r8)
@@ -168,11 +168,11 @@ need_resched:
 	beqz	r4, restore_all
 	LDIMM	(r4, PREEMPT_ACTIVE)
 	st	r4, @(TI_PRE_COUNT, r8)
-	STI(r4)
+	ENABLE_INTERRUPTS(r4)
 	bl	schedule
 	ldi	r4, #0
 	st	r4, @(TI_PRE_COUNT, r8)
-	CLI(r4)
+	DISABLE_INTERRUPTS(r4)
 	bra	need_resched
 #endif
 
@@ -180,7 +180,7 @@ need_resched:
 ENTRY(system_call)
 	SWITCH_TO_KERNEL_STACK
 	SAVE_ALL
-	STI(r4)				; Enable interrupt
+	ENABLE_INTERRUPTS(r4)		; Enable interrupt
 	st	sp, PTREGS(sp)		; implicit pt_regs parameter
 	cmpui	r7, #NR_syscalls
 	bnc	syscall_badsys
@@ -198,7 +198,7 @@ syscall_call:
 	jl	r7			; execute system call
 	st	r0, R0(sp)		; save the return value
 syscall_exit:
-	CLI(r4)				; make sure we don't miss an interrupt
+	DISABLE_INTERRUPTS(r4)		; make sure we don't miss an interrupt
 					; setting need_resched or sigpending
 					; between sampling and the iret
 	ld	r9, @(TI_FLAGS, r8)
@@ -215,7 +215,7 @@ work_pending:
 	beqz	r4, work_notifysig
 work_resched:
 	bl	schedule
-	CLI(r4)				; make sure we don't miss an interrupt
+	DISABLE_INTERRUPTS(r4)		; make sure we don't miss an interrupt
 					; setting need_resched or sigpending
 					; between sampling and the iret
 	ld	r9, @(TI_FLAGS, r8)
@@ -257,7 +257,7 @@ syscall_exit_work:
 	ld	r9, @(TI_FLAGS, r8)
 	and3	r4, r9, #_TIF_SYSCALL_TRACE
 	beqz	r4, work_pending
-	STI(r4)				; could let do_syscall_trace() call
+	ENABLE_INTERRUPTS(r4)		; could let do_syscall_trace() call
 					; schedule() instead
 	bl	do_syscall_trace
 	bra	resume_userspace
diff --git a/include/asm-m32r/assembler.h b/include/asm-m32r/assembler.h
index 47041d19d4a8..26351539b5ff 100644
--- a/include/asm-m32r/assembler.h
+++ b/include/asm-m32r/assembler.h
@@ -52,27 +52,27 @@
 	.endm
 
 #if !(defined(CONFIG_CHIP_M32102) || defined(CONFIG_CHIP_M32104))
-#define STI(reg) STI_M reg
-	.macro STI_M reg
+#define ENABLE_INTERRUPTS(reg) ENABLE_INTERRUPTS reg
+	.macro ENABLE_INTERRUPTS reg
 	setpsw  #0x40	    ->	nop
 	; WORKAROUND: "-> nop" is a workaround for the M32700(TS1).
 	.endm
 
-#define CLI(reg) CLI_M reg
-	.macro CLI_M reg
+#define DISABLE_INTERRUPTS(reg) DISABLE_INTERRUPTS reg
+	.macro DISABLE_INTERRUPTS reg
 	clrpsw  #0x40	    ->	nop
 	; WORKAROUND: "-> nop" is a workaround for the M32700(TS1).
 	.endm
 #else	/* CONFIG_CHIP_M32102 || CONFIG_CHIP_M32104 */
-#define STI(reg) STI_M reg
-	.macro STI_M reg
+#define ENABLE_INTERRUPTS(reg) ENABLE_INTERRUPTS reg
+	.macro ENABLE_INTERRUPTS reg
 	mvfc	\reg, psw
 	or3	\reg, \reg, #0x0040
 	mvtc	\reg, psw
 	.endm
 
-#define CLI(reg) CLI_M reg
-	.macro CLI_M reg
+#define DISABLE_INTERRUPTS(reg) DISABLE_INTERRUPTS reg
+	.macro DISABLE_INTERRUPTS reg
 	mvfc	\reg, psw
 	and3	\reg, \reg, #0xffbf
 	mvtc	\reg, psw