Input: add driver for Hynitron cstxxx touchscreens

Add support for the Hynitron cst3xx controller found on devices such
as the Anbernic RG353P and RG353V (the Hynitron CST340). This driver
was built from sources provided by Hynitron to Anbernic (possibly
via Rockchip as an intermediary) and marked as GPLv2 in the code.
This driver was written strictly for the cst3xx series, but in
most places was left somewhat generic so support could be easily
added to other devices in the future.

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20221028202636.14341-4-macroalpha82@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

3 files changed, 511 insertions, 0 deletions

diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index dc90a3ea51ee..46b158c04c7b 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -422,6 +422,18 @@ config TOUCHSCREEN_HYCON_HY46XX
 	  To compile this driver as a module, choose M here: the
 	  module will be called hycon-hy46xx.
 
+config TOUCHSCREEN_HYNITRON_CSTXXX
+	tristate "Hynitron touchscreen support"
+	depends on I2C
+	help
+	  Say Y here if you have a touchscreen using a Hynitron
+	  touchscreen controller.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called hynitron-cstxxx.
+
 config TOUCHSCREEN_ILI210X
 	tristate "Ilitek ILI210X based touchscreen"
 	depends on I2C
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
index 557f84fd2075..43860ca19b98 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -47,6 +47,7 @@ obj-$(CONFIG_TOUCHSCREEN_EXC3000)	+= exc3000.o
 obj-$(CONFIG_TOUCHSCREEN_FUJITSU)	+= fujitsu_ts.o
 obj-$(CONFIG_TOUCHSCREEN_GOODIX)	+= goodix_ts.o
 obj-$(CONFIG_TOUCHSCREEN_HIDEEP)	+= hideep.o
+obj-$(CONFIG_TOUCHSCREEN_HYNITRON_CSTXXX)	+= hynitron_cstxxx.o
 obj-$(CONFIG_TOUCHSCREEN_ILI210X)	+= ili210x.o
 obj-$(CONFIG_TOUCHSCREEN_ILITEK)	+= ilitek_ts_i2c.o
 obj-$(CONFIG_TOUCHSCREEN_IMAGIS)	+= imagis.o
diff --git a/drivers/input/touchscreen/hynitron_cstxxx.c b/drivers/input/touchscreen/hynitron_cstxxx.c
new file mode 100644
index 000000000000..0b9a99c6f221
--- /dev/null
+++ b/drivers/input/touchscreen/hynitron_cstxxx.c
@@ -0,0 +1,498 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  Driver for Hynitron cstxxx Touchscreen
+ *
+ *  Copyright (c) 2022 Chris Morgan <macromorgan@hotmail.com>
+ *
+ *  This code is based on hynitron_core.c authored by Hynitron.
+ *  Note that no datasheet was available, so much of these registers
+ *  are undocumented. This is essentially a cleaned-up version of the
+ *  vendor driver with support removed for hardware I cannot test and
+ *  device-specific functions replated with generic functions wherever
+ *  possible.
+ */
+
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/input/mt.h>
+#include <linux/input/touchscreen.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/property.h>
+#include <asm/unaligned.h>
+
+/* Per chip data */
+struct hynitron_ts_chip_data {
+	unsigned int max_touch_num;
+	u32 ic_chkcode;
+	int (*firmware_info)(struct i2c_client *client);
+	int (*bootloader_enter)(struct i2c_client *client);
+	int (*init_input)(struct i2c_client *client);
+	void (*report_touch)(struct i2c_client *client);
+};
+
+/* Data generic to all (supported and non-supported) controllers. */
+struct hynitron_ts_data {
+	const struct hynitron_ts_chip_data *chip;
+	struct i2c_client *client;
+	struct input_dev *input_dev;
+	struct touchscreen_properties prop;
+	struct gpio_desc *reset_gpio;
+};
+
+/*
+ * Since I have no datasheet, these values are guessed and/or assumed
+ * based on observation and testing.
+ */
+#define CST3XX_FIRMWARE_INFO_START_CMD		0x01d1
+#define CST3XX_FIRMWARE_INFO_END_CMD		0x09d1
+#define CST3XX_FIRMWARE_CHK_CODE_REG		0xfcd1
+#define CST3XX_FIRMWARE_VERSION_REG		0x08d2
+#define CST3XX_FIRMWARE_VER_INVALID_VAL		0xa5a5a5a5
+
+#define CST3XX_BOOTLDR_PROG_CMD			0xaa01a0
+#define CST3XX_BOOTLDR_PROG_CHK_REG		0x02a0
+#define CST3XX_BOOTLDR_CHK_VAL			0xac
+
+#define CST3XX_TOUCH_DATA_PART_REG		0x00d0
+#define CST3XX_TOUCH_DATA_FULL_REG		0x07d0
+#define CST3XX_TOUCH_DATA_CHK_VAL		0xab
+#define CST3XX_TOUCH_DATA_TOUCH_VAL		0x03
+#define CST3XX_TOUCH_DATA_STOP_CMD		0xab00d0
+#define CST3XX_TOUCH_COUNT_MASK			GENMASK(6, 0)
+
+
+/*
+ * Hard coded reset delay value of 20ms not IC dependent in
+ * vendor driver.
+ */
+static void hyn_reset_proc(struct i2c_client *client, int delay)
+{
+	struct hynitron_ts_data *ts_data = i2c_get_clientdata(client);
+
+	gpiod_set_value_cansleep(ts_data->reset_gpio, 1);
+	msleep(20);
+	gpiod_set_value_cansleep(ts_data->reset_gpio, 0);
+	if (delay)
+		fsleep(delay * 1000);
+}
+
+static irqreturn_t hyn_interrupt_handler(int irq, void *dev_id)
+{
+	struct i2c_client *client = dev_id;
+	struct hynitron_ts_data *ts_data = i2c_get_clientdata(client);
+
+	ts_data->chip->report_touch(client);
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * The vendor driver would retry twice before failing to read or write
+ * to the i2c device.
+ */
+
+static int cst3xx_i2c_write(struct i2c_client *client,
+			    unsigned char *buf, int len)
+{
+	int ret;
+	int retries = 0;
+
+	while (retries < 2) {
+		ret = i2c_master_send(client, buf, len);
+		if (ret == len)
+			return 0;
+		if (ret <= 0)
+			retries++;
+		else
+			break;
+	}
+
+	return ret < 0 ? ret : -EIO;
+}
+
+static int cst3xx_i2c_read_register(struct i2c_client *client, u16 reg,
+				    u8 *val, u16 len)
+{
+	__le16 buf = cpu_to_le16(reg);
+	struct i2c_msg msgs[] = {
+		{
+			.addr = client->addr,
+			.flags = 0,
+			.len = 2,
+			.buf = (u8 *)&buf,
+		},
+		{
+			.addr = client->addr,
+			.flags = I2C_M_RD,
+			.len = len,
+			.buf = val,
+		}
+	};
+	int err;
+	int ret;
+
+	ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
+	if (ret == ARRAY_SIZE(msgs))
+		return 0;
+
+	err = ret < 0 ? ret : -EIO;
+	dev_err(&client->dev, "Error reading %d bytes from 0x%04x: %d (%d)\n",
+		len, reg, err, ret);
+
+	return err;
+}
+
+static int cst3xx_firmware_info(struct i2c_client *client)
+{
+	struct hynitron_ts_data *ts_data = i2c_get_clientdata(client);
+	int err;
+	u32 tmp;
+	unsigned char buf[4];
+
+	/*
+	 * Tests suggest this command needed to read firmware regs.
+	 */
+	put_unaligned_le16(CST3XX_FIRMWARE_INFO_START_CMD, buf);
+	err = cst3xx_i2c_write(client, buf, 2);
+	if (err)
+		return err;
+
+	usleep_range(10000, 11000);
+
+	/*
+	 * Read register for check-code to determine if device detected
+	 * correctly.
+	 */
+	err = cst3xx_i2c_read_register(client, CST3XX_FIRMWARE_CHK_CODE_REG,
+				       buf, 4);
+	if (err)
+		return err;
+
+	tmp = get_unaligned_le32(buf);
+	if ((tmp & 0xffff0000) != ts_data->chip->ic_chkcode) {
+		dev_err(&client->dev, "%s ic mismatch, chkcode is %u\n",
+			__func__, tmp);
+		return -ENODEV;
+	}
+
+	usleep_range(10000, 11000);
+
+	/* Read firmware version and test if firmware missing. */
+	err = cst3xx_i2c_read_register(client, CST3XX_FIRMWARE_VERSION_REG,
+				       buf, 4);
+	if (err)
+		return err;
+
+	tmp = get_unaligned_le32(buf);
+	if (tmp == CST3XX_FIRMWARE_VER_INVALID_VAL) {
+		dev_err(&client->dev, "Device firmware missing\n");
+		return -ENODEV;
+	}
+
+	/*
+	 * Tests suggest cmd required to exit reading firmware regs.
+	 */
+	put_unaligned_le16(CST3XX_FIRMWARE_INFO_END_CMD, buf);
+	err = cst3xx_i2c_write(client, buf, 2);
+	if (err)
+		return err;
+
+	usleep_range(5000, 6000);
+
+	return 0;
+}
+
+static int cst3xx_bootloader_enter(struct i2c_client *client)
+{
+	int err;
+	u8 retry;
+	u32 tmp;
+	unsigned char buf[3];
+
+	for (retry = 0; retry < 5; retry++) {
+		hyn_reset_proc(client, (7 + retry));
+		/* set cmd to enter program mode */
+		put_unaligned_le24(CST3XX_BOOTLDR_PROG_CMD, buf);
+		err = cst3xx_i2c_write(client, buf, 3);
+		if (err)
+			continue;
+
+		usleep_range(2000, 2500);
+
+		/* check whether in program mode */
+		err = cst3xx_i2c_read_register(client,
+					       CST3XX_BOOTLDR_PROG_CHK_REG,
+					       buf, 1);
+		if (err)
+			continue;
+
+		tmp = get_unaligned(buf);
+		if (tmp == CST3XX_BOOTLDR_CHK_VAL)
+			break;
+	}
+
+	if (tmp != CST3XX_BOOTLDR_CHK_VAL) {
+		dev_err(&client->dev, "%s unable to enter bootloader mode\n",
+			__func__);
+		return -ENODEV;
+	}
+
+	hyn_reset_proc(client, 40);
+
+	return 0;
+}
+
+static void cst3xx_report_contact(struct hynitron_ts_data *ts_data,
+				  u8 id, unsigned int x, unsigned int y, u8 w)
+{
+	input_mt_slot(ts_data->input_dev, id);
+	input_mt_report_slot_state(ts_data->input_dev, MT_TOOL_FINGER, 1);
+	touchscreen_report_pos(ts_data->input_dev, &ts_data->prop, x, y, true);
+	input_report_abs(ts_data->input_dev, ABS_MT_TOUCH_MAJOR, w);
+}
+
+static int cst3xx_finish_touch_read(struct i2c_client *client)
+{
+	unsigned char buf[3];
+	int err;
+
+	put_unaligned_le24(CST3XX_TOUCH_DATA_STOP_CMD, buf);
+	err = cst3xx_i2c_write(client, buf, 3);
+	if (err) {
+		dev_err(&client->dev,
+			"send read touch info ending failed: %d\n", err);
+		return err;
+	}
+
+	return 0;
+}
+
+/*
+ * Handle events from IRQ. Note that for cst3xx it appears that IRQ
+ * fires continuously while touched, otherwise once every 1500ms
+ * when not touched (assume touchscreen waking up periodically).
+ * Note buffer is sized for 5 fingers, if more needed buffer must
+ * be increased. The buffer contains 5 bytes for each touch point,
+ * a touch count byte, a check byte, and then a second check byte after
+ * all other touch points.
+ *
+ * For example 1 touch would look like this:
+ * touch1[5]:touch_count[1]:chk_byte[1]
+ *
+ * 3 touches would look like this:
+ * touch1[5]:touch_count[1]:chk_byte[1]:touch2[5]:touch3[5]:chk_byte[1]
+ */
+static void cst3xx_touch_report(struct i2c_client *client)
+{
+	struct hynitron_ts_data *ts_data = i2c_get_clientdata(client);
+	u8 buf[28];
+	u8 finger_id, sw, w;
+	unsigned int x, y;
+	unsigned int touch_cnt, end_byte;
+	unsigned int idx = 0;
+	unsigned int i;
+	int err;
+
+	/* Read and validate the first bits of input data. */
+	err = cst3xx_i2c_read_register(client, CST3XX_TOUCH_DATA_PART_REG,
+				       buf, 28);
+	if (err ||
+	    buf[6] != CST3XX_TOUCH_DATA_CHK_VAL ||
+	    buf[0] == CST3XX_TOUCH_DATA_CHK_VAL) {
+		dev_err(&client->dev, "cst3xx touch read failure\n");
+		return;
+	}
+
+	/* Report to the device we're done reading the touch data. */
+	err = cst3xx_finish_touch_read(client);
+	if (err)
+		return;
+
+	touch_cnt = buf[5] & CST3XX_TOUCH_COUNT_MASK;
+	/*
+	 * Check the check bit of the last touch slot. The check bit is
+	 * always present after touch point 1 for valid data, and then
+	 * appears as the last byte after all other touch data.
+	 */
+	if (touch_cnt > 1) {
+		end_byte = touch_cnt * 5 + 2;
+		if (buf[end_byte] != CST3XX_TOUCH_DATA_CHK_VAL) {
+			dev_err(&client->dev, "cst3xx touch read failure\n");
+			return;
+		}
+	}
+
+	/* Parse through the buffer to capture touch data. */
+	for (i = 0; i < touch_cnt; i++) {
+		x = ((buf[idx + 1] << 4) | ((buf[idx + 3] >> 4) & 0x0f));
+		y = ((buf[idx + 2] << 4) | (buf[idx + 3] & 0x0f));
+		w = (buf[idx + 4] >> 3);
+		sw = (buf[idx] & 0x0f) >> 1;
+		finger_id = (buf[idx] >> 4) & 0x0f;
+
+		/* Sanity check we don't have more fingers than we expect */
+		if (ts_data->chip->max_touch_num < finger_id) {
+			dev_err(&client->dev, "cst3xx touch read failure\n");
+			break;
+		}
+
+		/* sw value of 0 means no touch, 0x03 means touch */
+		if (sw == CST3XX_TOUCH_DATA_TOUCH_VAL)
+			cst3xx_report_contact(ts_data, finger_id, x, y, w);
+
+		idx += 5;
+
+		/* Skip the 2 bytes between point 1 and point 2 */
+		if (i == 0)
+			idx += 2;
+	}
+
+	input_mt_sync_frame(ts_data->input_dev);
+	input_sync(ts_data->input_dev);
+}
+
+static int cst3xx_input_dev_int(struct i2c_client *client)
+{
+	struct hynitron_ts_data *ts_data = i2c_get_clientdata(client);
+	int err;
+
+	ts_data->input_dev = devm_input_allocate_device(&client->dev);
+	if (!ts_data->input_dev) {
+		dev_err(&client->dev, "Failed to allocate input device\n");
+		return -ENOMEM;
+	}
+
+	ts_data->input_dev->name = "Hynitron cst3xx Touchscreen";
+	ts_data->input_dev->phys = "input/ts";
+	ts_data->input_dev->id.bustype = BUS_I2C;
+
+	input_set_drvdata(ts_data->input_dev, ts_data);
+
+	input_set_capability(ts_data->input_dev, EV_ABS, ABS_MT_POSITION_X);
+	input_set_capability(ts_data->input_dev, EV_ABS, ABS_MT_POSITION_Y);
+	input_set_abs_params(ts_data->input_dev, ABS_MT_TOUCH_MAJOR,
+			     0, 255, 0, 0);
+
+	touchscreen_parse_properties(ts_data->input_dev, true, &ts_data->prop);
+
+	if (!ts_data->prop.max_x || !ts_data->prop.max_y) {
+		dev_err(&client->dev,
+			"Invalid x/y (%d, %d), using defaults\n",
+			ts_data->prop.max_x, ts_data->prop.max_y);
+		ts_data->prop.max_x = 1152;
+		ts_data->prop.max_y = 1920;
+		input_abs_set_max(ts_data->input_dev,
+				  ABS_MT_POSITION_X, ts_data->prop.max_x);
+		input_abs_set_max(ts_data->input_dev,
+				  ABS_MT_POSITION_Y, ts_data->prop.max_y);
+	}
+
+	err = input_mt_init_slots(ts_data->input_dev,
+				  ts_data->chip->max_touch_num,
+				  INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED);
+	if (err) {
+		dev_err(&client->dev,
+			"Failed to initialize input slots: %d\n", err);
+		return err;
+	}
+
+	err = input_register_device(ts_data->input_dev);
+	if (err) {
+		dev_err(&client->dev,
+			"Input device registration failed: %d\n", err);
+		return err;
+	}
+
+	return 0;
+}
+
+static int hyn_probe(struct i2c_client *client)
+{
+	struct hynitron_ts_data *ts_data;
+	int err;
+
+	ts_data = devm_kzalloc(&client->dev, sizeof(*ts_data), GFP_KERNEL);
+	if (!ts_data)
+		return -ENOMEM;
+
+	ts_data->client = client;
+	i2c_set_clientdata(client, ts_data);
+
+	ts_data->chip = device_get_match_data(&client->dev);
+	if (!ts_data->chip)
+		return -EINVAL;
+
+	ts_data->reset_gpio = devm_gpiod_get(&client->dev,
+					     "reset", GPIOD_OUT_LOW);
+	err = PTR_ERR_OR_ZERO(ts_data->reset_gpio);
+	if (err) {
+		dev_err(&client->dev, "request reset gpio failed: %d\n", err);
+		return err;
+	}
+
+	hyn_reset_proc(client, 60);
+
+	err = ts_data->chip->bootloader_enter(client);
+	if (err < 0)
+		return err;
+
+	err = ts_data->chip->init_input(client);
+	if (err < 0)
+		return err;
+
+	err = ts_data->chip->firmware_info(client);
+	if (err < 0)
+		return err;
+
+	err = devm_request_threaded_irq(&client->dev, client->irq,
+					NULL, hyn_interrupt_handler,
+					IRQF_ONESHOT,
+					"Hynitron Touch Int", client);
+	if (err) {
+		dev_err(&client->dev, "failed to request IRQ: %d\n", err);
+		return err;
+	}
+
+	return 0;
+}
+
+static const struct hynitron_ts_chip_data cst3xx_data = {
+	.max_touch_num		= 5,
+	.ic_chkcode		= 0xcaca0000,
+	.firmware_info		= &cst3xx_firmware_info,
+	.bootloader_enter	= &cst3xx_bootloader_enter,
+	.init_input		= &cst3xx_input_dev_int,
+	.report_touch		= &cst3xx_touch_report,
+};
+
+static const struct i2c_device_id hyn_tpd_id[] = {
+	{ .name = "hynitron_ts", 0 },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(i2c, hyn_tpd_id);
+
+static const struct of_device_id hyn_dt_match[] = {
+	{ .compatible = "hynitron,cst340", .data = &cst3xx_data },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, hyn_dt_match);
+
+static struct i2c_driver hynitron_i2c_driver = {
+	.driver = {
+		.name = "Hynitron-TS",
+		.of_match_table = hyn_dt_match,
+		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
+	},
+	.id_table = hyn_tpd_id,
+	.probe_new = hyn_probe,
+};
+
+module_i2c_driver(hynitron_i2c_driver);
+
+MODULE_AUTHOR("Chris Morgan");
+MODULE_DESCRIPTION("Hynitron Touchscreen Driver");
+MODULE_LICENSE("GPL");