summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2014-08-10 11:13:06 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2014-08-10 11:13:06 -0700
commit64e3bbc7ef7029669c7fb23408864c60f147f7b9 (patch)
treeba958cab515ec5a8cf029e9955de27f99b1e069a
parent913847586290d5de22659e2a6195d91ff24d5aa6 (diff)
parentee34fb97a96ceac3334705ebab8b541ca291699f (diff)
downloadlinux-64e3bbc7ef7029669c7fb23408864c60f147f7b9.tar.bz2
Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson: - a short branch of OMAP fixes that we didn't merge before the window opened. - a small cleanup that sorts the rk3288 dts entries properly - a build fix due to a reference to a removed DT node on exynos * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: dts: exynos5420: remove disp_pd ARM: EXYNOS: Fix suspend/resume sequences ARM: dts: Fix the sort ordering of EHCI and HSIC in rk3288.dtsi ARM: OMAP3: Fix coding style problems in arch/arm/mach-omap2/control.c ARM: OMAP3: Fix choice of omap3_restore_es function in OMAP34XX rev3.1.2 case. ARM: OMAP2+: clock: allow omap2_dpll_round_rate() to round to next-lowest rate
-rw-r--r--arch/arm/boot/dts/exynos5420.dtsi1
-rw-r--r--arch/arm/boot/dts/rk3288.dtsi40
-rw-r--r--arch/arm/mach-exynos/pm.c163
-rw-r--r--arch/arm/mach-omap2/clkt_dpll.c28
-rw-r--r--arch/arm/mach-omap2/control.c6
-rw-r--r--arch/arm/mach-omap2/dpll3xxx.c13
-rw-r--r--drivers/cpuidle/cpuidle-exynos.c25
7 files changed, 135 insertions, 141 deletions
diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index 95ec37dff3e8..bfe056d9148c 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -525,7 +525,6 @@
compatible = "samsung,exynos5410-mipi-dsi";
reg = <0x14500000 0x10000>;
interrupts = <0 82 0>;
- samsung,power-domain = <&disp_pd>;
phys = <&mipi_phy 1>;
phy-names = "dsim";
clocks = <&clock CLK_DSIM1>, <&clock CLK_SCLK_MIPI1>;
diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index e7cb00873dd4..5950b0a53224 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -195,6 +195,26 @@
status = "disabled";
};
+ usb_host0_ehci: usb@ff500000 {
+ compatible = "generic-ehci";
+ reg = <0xff500000 0x100>;
+ interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_USBHOST0>;
+ clock-names = "usbhost";
+ status = "disabled";
+ };
+
+ /* NOTE: ohci@ff520000 doesn't actually work on hardware */
+
+ usb_hsic: usb@ff5c0000 {
+ compatible = "generic-ehci";
+ reg = <0xff5c0000 0x100>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_HSIC>;
+ clock-names = "usbhost";
+ status = "disabled";
+ };
+
i2c0: i2c@ff650000 {
compatible = "rockchip,rk3288-i2c";
reg = <0xff650000 0x1000>;
@@ -251,26 +271,6 @@
status = "disabled";
};
- usb_host0_ehci: usb@ff500000 {
- compatible = "generic-ehci";
- reg = <0xff500000 0x100>;
- interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cru HCLK_USBHOST0>;
- clock-names = "usbhost";
- status = "disabled";
- };
-
- /* NOTE: ohci@ff520000 doesn't actually work on hardware */
-
- usb_hsic: usb@ff5c0000 {
- compatible = "generic-ehci";
- reg = <0xff5c0000 0x100>;
- interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cru HCLK_HSIC>;
- clock-names = "usbhost";
- status = "disabled";
- };
-
gic: interrupt-controller@ffc01000 {
compatible = "arm,gic-400";
interrupt-controller;
diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c
index 18646b7e226b..abefacb45976 100644
--- a/arch/arm/mach-exynos/pm.c
+++ b/arch/arm/mach-exynos/pm.c
@@ -114,26 +114,6 @@ static int exynos_irq_set_wake(struct irq_data *data, unsigned int state)
#define S5P_CHECK_AFTR 0xFCBA0D10
#define S5P_CHECK_SLEEP 0x00000BAD
-/* Ext-GIC nIRQ/nFIQ is the only wakeup source in AFTR */
-static void exynos_set_wakeupmask(long mask)
-{
- pmu_raw_writel(mask, S5P_WAKEUP_MASK);
-}
-
-static void exynos_cpu_set_boot_vector(long flags)
-{
- __raw_writel(virt_to_phys(exynos_cpu_resume), EXYNOS_BOOT_VECTOR_ADDR);
- __raw_writel(flags, EXYNOS_BOOT_VECTOR_FLAG);
-}
-
-void exynos_enter_aftr(void)
-{
- exynos_set_wakeupmask(0x0000ff3e);
- exynos_cpu_set_boot_vector(S5P_CHECK_AFTR);
- /* Set value of power down register for aftr mode */
- exynos_sys_powerdown_conf(SYS_AFTR);
-}
-
/* For Cortex-A9 Diagnostic and Power control register */
static unsigned int save_arm_register[2];
@@ -173,6 +153,82 @@ static void exynos_cpu_restore_register(void)
: "cc");
}
+static void exynos_pm_central_suspend(void)
+{
+ unsigned long tmp;
+
+ /* Setting Central Sequence Register for power down mode */
+ tmp = pmu_raw_readl(S5P_CENTRAL_SEQ_CONFIGURATION);
+ tmp &= ~S5P_CENTRAL_LOWPWR_CFG;
+ pmu_raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION);
+}
+
+static int exynos_pm_central_resume(void)
+{
+ unsigned long tmp;
+
+ /*
+ * If PMU failed while entering sleep mode, WFI will be
+ * ignored by PMU and then exiting cpu_do_idle().
+ * S5P_CENTRAL_LOWPWR_CFG bit will not be set automatically
+ * in this situation.
+ */
+ tmp = pmu_raw_readl(S5P_CENTRAL_SEQ_CONFIGURATION);
+ if (!(tmp & S5P_CENTRAL_LOWPWR_CFG)) {
+ tmp |= S5P_CENTRAL_LOWPWR_CFG;
+ pmu_raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION);
+ /* clear the wakeup state register */
+ pmu_raw_writel(0x0, S5P_WAKEUP_STAT);
+ /* No need to perform below restore code */
+ return -1;
+ }
+
+ return 0;
+}
+
+/* Ext-GIC nIRQ/nFIQ is the only wakeup source in AFTR */
+static void exynos_set_wakeupmask(long mask)
+{
+ pmu_raw_writel(mask, S5P_WAKEUP_MASK);
+}
+
+static void exynos_cpu_set_boot_vector(long flags)
+{
+ __raw_writel(virt_to_phys(exynos_cpu_resume), EXYNOS_BOOT_VECTOR_ADDR);
+ __raw_writel(flags, EXYNOS_BOOT_VECTOR_FLAG);
+}
+
+static int exynos_aftr_finisher(unsigned long flags)
+{
+ exynos_set_wakeupmask(0x0000ff3e);
+ exynos_cpu_set_boot_vector(S5P_CHECK_AFTR);
+ /* Set value of power down register for aftr mode */
+ exynos_sys_powerdown_conf(SYS_AFTR);
+ cpu_do_idle();
+
+ return 1;
+}
+
+void exynos_enter_aftr(void)
+{
+ cpu_pm_enter();
+
+ exynos_pm_central_suspend();
+ if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9)
+ exynos_cpu_save_register();
+
+ cpu_suspend(0, exynos_aftr_finisher);
+
+ if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9) {
+ scu_enable(S5P_VA_SCU);
+ exynos_cpu_restore_register();
+ }
+
+ exynos_pm_central_resume();
+
+ cpu_pm_exit();
+}
+
static int exynos_cpu_suspend(unsigned long arg)
{
#ifdef CONFIG_CACHE_L2X0
@@ -217,16 +273,6 @@ static void exynos_pm_prepare(void)
pmu_raw_writel(virt_to_phys(exynos_cpu_resume), S5P_INFORM0);
}
-static void exynos_pm_central_suspend(void)
-{
- unsigned long tmp;
-
- /* Setting Central Sequence Register for power down mode */
- tmp = pmu_raw_readl(S5P_CENTRAL_SEQ_CONFIGURATION);
- tmp &= ~S5P_CENTRAL_LOWPWR_CFG;
- pmu_raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION);
-}
-
static int exynos_pm_suspend(void)
{
unsigned long tmp;
@@ -244,29 +290,6 @@ static int exynos_pm_suspend(void)
return 0;
}
-static int exynos_pm_central_resume(void)
-{
- unsigned long tmp;
-
- /*
- * If PMU failed while entering sleep mode, WFI will be
- * ignored by PMU and then exiting cpu_do_idle().
- * S5P_CENTRAL_LOWPWR_CFG bit will not be set automatically
- * in this situation.
- */
- tmp = pmu_raw_readl(S5P_CENTRAL_SEQ_CONFIGURATION);
- if (!(tmp & S5P_CENTRAL_LOWPWR_CFG)) {
- tmp |= S5P_CENTRAL_LOWPWR_CFG;
- pmu_raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION);
- /* clear the wakeup state register */
- pmu_raw_writel(0x0, S5P_WAKEUP_STAT);
- /* No need to perform below restore code */
- return -1;
- }
-
- return 0;
-}
-
static void exynos_pm_resume(void)
{
if (exynos_pm_central_resume())
@@ -369,44 +392,10 @@ static const struct platform_suspend_ops exynos_suspend_ops = {
.valid = suspend_valid_only_mem,
};
-static int exynos_cpu_pm_notifier(struct notifier_block *self,
- unsigned long cmd, void *v)
-{
- int cpu = smp_processor_id();
-
- switch (cmd) {
- case CPU_PM_ENTER:
- if (cpu == 0) {
- exynos_pm_central_suspend();
- if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9)
- exynos_cpu_save_register();
- }
- break;
-
- case CPU_PM_EXIT:
- if (cpu == 0) {
- if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9) {
- scu_enable(S5P_VA_SCU);
- exynos_cpu_restore_register();
- }
- exynos_pm_central_resume();
- }
- break;
- }
-
- return NOTIFY_OK;
-}
-
-static struct notifier_block exynos_cpu_pm_notifier_block = {
- .notifier_call = exynos_cpu_pm_notifier,
-};
-
void __init exynos_pm_init(void)
{
u32 tmp;
- cpu_pm_register_notifier(&exynos_cpu_pm_notifier_block);
-
/* Platform-specific GIC callback */
gic_arch_extn.irq_set_wake = exynos_irq_set_wake;
diff --git a/arch/arm/mach-omap2/clkt_dpll.c b/arch/arm/mach-omap2/clkt_dpll.c
index b2ff6cd7ca9f..f251a14cbf16 100644
--- a/arch/arm/mach-omap2/clkt_dpll.c
+++ b/arch/arm/mach-omap2/clkt_dpll.c
@@ -285,10 +285,13 @@ long omap2_dpll_round_rate(struct clk_hw *hw, unsigned long target_rate,
{
struct clk_hw_omap *clk = to_clk_hw_omap(hw);
int m, n, r, scaled_max_m;
+ int min_delta_m = INT_MAX, min_delta_n = INT_MAX;
unsigned long scaled_rt_rp;
unsigned long new_rate = 0;
struct dpll_data *dd;
unsigned long ref_rate;
+ long delta;
+ long prev_min_delta = LONG_MAX;
const char *clk_name;
if (!clk || !clk->dpll_data)
@@ -334,23 +337,34 @@ long omap2_dpll_round_rate(struct clk_hw *hw, unsigned long target_rate,
if (r == DPLL_MULT_UNDERFLOW)
continue;
+ /* skip rates above our target rate */
+ delta = target_rate - new_rate;
+ if (delta < 0)
+ continue;
+
+ if (delta < prev_min_delta) {
+ prev_min_delta = delta;
+ min_delta_m = m;
+ min_delta_n = n;
+ }
+
pr_debug("clock: %s: m = %d: n = %d: new_rate = %lu\n",
clk_name, m, n, new_rate);
- if (target_rate == new_rate) {
- dd->last_rounded_m = m;
- dd->last_rounded_n = n;
- dd->last_rounded_rate = target_rate;
+ if (delta == 0)
break;
- }
}
- if (target_rate != new_rate) {
+ if (prev_min_delta == LONG_MAX) {
pr_debug("clock: %s: cannot round to rate %lu\n",
clk_name, target_rate);
return ~0;
}
- return target_rate;
+ dd->last_rounded_m = min_delta_m;
+ dd->last_rounded_n = min_delta_n;
+ dd->last_rounded_rate = target_rate - prev_min_delta;
+
+ return dd->last_rounded_rate;
}
diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c
index f4796c002070..da041b4ab29c 100644
--- a/arch/arm/mach-omap2/control.c
+++ b/arch/arm/mach-omap2/control.c
@@ -280,6 +280,7 @@ void omap3_clear_scratchpad_contents(void)
u32 max_offset = OMAP343X_SCRATCHPAD_ROM_OFFSET;
void __iomem *v_addr;
u32 offset = 0;
+
v_addr = OMAP2_L4_IO_ADDRESS(OMAP343X_SCRATCHPAD_ROM);
if (omap3xxx_prm_clear_global_cold_reset()) {
for ( ; offset <= max_offset; offset += 0x4)
@@ -309,7 +310,8 @@ void omap3_save_scratchpad_contents(void)
scratchpad_contents.public_restore_ptr =
virt_to_phys(omap3_restore_3630);
else if (omap_rev() != OMAP3430_REV_ES3_0 &&
- omap_rev() != OMAP3430_REV_ES3_1)
+ omap_rev() != OMAP3430_REV_ES3_1 &&
+ omap_rev() != OMAP3430_REV_ES3_1_2)
scratchpad_contents.public_restore_ptr =
virt_to_phys(omap3_restore);
else
@@ -463,7 +465,6 @@ void omap3_control_save_context(void)
control_context.csi = omap_ctrl_readl(OMAP343X_CONTROL_CSI);
control_context.padconf_sys_nirq =
omap_ctrl_readl(OMAP343X_CONTROL_PADCONF_SYSNIRQ);
- return;
}
void omap3_control_restore_context(void)
@@ -521,7 +522,6 @@ void omap3_control_restore_context(void)
omap_ctrl_writel(control_context.csi, OMAP343X_CONTROL_CSI);
omap_ctrl_writel(control_context.padconf_sys_nirq,
OMAP343X_CONTROL_PADCONF_SYSNIRQ);
- return;
}
void omap3630_ctrl_disable_rta(void)
diff --git a/arch/arm/mach-omap2/dpll3xxx.c b/arch/arm/mach-omap2/dpll3xxx.c
index cd5f3a0b97bd..ac3d789ac3cd 100644
--- a/arch/arm/mach-omap2/dpll3xxx.c
+++ b/arch/arm/mach-omap2/dpll3xxx.c
@@ -475,6 +475,7 @@ int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate,
{
struct clk_hw_omap *clk = to_clk_hw_omap(hw);
struct clk *new_parent = NULL;
+ unsigned long rrate;
u16 freqsel = 0;
struct dpll_data *dd;
int ret;
@@ -502,8 +503,16 @@ int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate,
__clk_prepare(dd->clk_ref);
clk_enable(dd->clk_ref);
- if (dd->last_rounded_rate != rate)
- rate = __clk_round_rate(hw->clk, rate);
+ /* XXX this check is probably pointless in the CCF context */
+ if (dd->last_rounded_rate != rate) {
+ rrate = __clk_round_rate(hw->clk, rate);
+ if (rrate != rate) {
+ pr_warn("%s: %s: final rate %lu does not match desired rate %lu\n",
+ __func__, __clk_get_name(hw->clk),
+ rrate, rate);
+ rate = rrate;
+ }
+ }
if (dd->last_rounded_rate == 0)
return -EINVAL;
diff --git a/drivers/cpuidle/cpuidle-exynos.c b/drivers/cpuidle/cpuidle-exynos.c
index 7c0151263828..ba9b34b579f3 100644
--- a/drivers/cpuidle/cpuidle-exynos.c
+++ b/drivers/cpuidle/cpuidle-exynos.c
@@ -20,25 +20,6 @@
static void (*exynos_enter_aftr)(void);
-static int idle_finisher(unsigned long flags)
-{
- exynos_enter_aftr();
- cpu_do_idle();
-
- return 1;
-}
-
-static int exynos_enter_core0_aftr(struct cpuidle_device *dev,
- struct cpuidle_driver *drv,
- int index)
-{
- cpu_pm_enter();
- cpu_suspend(0, idle_finisher);
- cpu_pm_exit();
-
- return index;
-}
-
static int exynos_enter_lowpower(struct cpuidle_device *dev,
struct cpuidle_driver *drv,
int index)
@@ -51,8 +32,10 @@ static int exynos_enter_lowpower(struct cpuidle_device *dev,
if (new_index == 0)
return arm_cpuidle_simple_enter(dev, drv, new_index);
- else
- return exynos_enter_core0_aftr(dev, drv, new_index);
+
+ exynos_enter_aftr();
+
+ return new_index;
}
static struct cpuidle_driver exynos_idle_driver = {