diff options
author | Marek Vasut <marex@denx.de> | 2013-11-17 04:04:50 +0100 |
---|---|---|
committer | Shawn Guo <shawn.guo@linaro.org> | 2014-02-09 21:32:46 +0800 |
commit | 64b07f0a66bf2ce736b065c5a85cd67fa811d3cb (patch) | |
tree | 67dd4533f7af3c50d46bd2c395c8561affe0d9da | |
parent | 40b1708f72af8106f9418a8416fa77238ec29eb8 (diff) | |
download | linux-64b07f0a66bf2ce736b065c5a85cd67fa811d3cb.tar.bz2 |
ARM: dts: imx53: Add USB support for M53EVK
Add USB support for M53EVK. The configuration is such that USB Host1
port is used as Host and the USB OTG port is used as Peripheral thus
far. Once OTG is properly fixed, the OTG will be further adjusted.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-rw-r--r-- | arch/arm/boot/dts/imx53-m53evk.dts | 22 |
1 files changed, 22 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/imx53-m53evk.dts b/arch/arm/boot/dts/imx53-m53evk.dts index d466070e81ba..1a25387777fe 100644 --- a/arch/arm/boot/dts/imx53-m53evk.dts +++ b/arch/arm/boot/dts/imx53-m53evk.dts @@ -96,6 +96,15 @@ regulator-always-on; }; + reg_usbh1_vbus: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 2 0>; + enable-active-low; + }; }; sound { @@ -222,6 +231,8 @@ MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x80000000 MX53_PAD_EIM_EB3__GPIO2_31 0x80000000 MX53_PAD_PATA_DA_0__GPIO7_6 0x80000000 + MX53_PAD_GPIO_2__GPIO1_2 0x80000000 + MX53_PAD_GPIO_3__USBOH3_USBH1_OC 0x80000000 >; }; @@ -426,3 +437,14 @@ pinctrl-0 = <&pinctrl_uart3>; status = "okay"; }; + +&usbh1 { + vbus-supply = <®_usbh1_vbus>; + phy_type = "utmi"; + status = "okay"; +}; + +&usbotg { + dr_mode = "peripheral"; + status = "okay"; +}; |