summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorViresh Kumar <viresh.kumar@linaro.org>2012-10-27 15:21:37 +0530
committerLinus Walleij <linus.walleij@linaro.org>2012-11-11 19:06:00 +0100
commit604bb7da77803cc01366c85fd5bcbc88b6dbe33a (patch)
treebe4602e7ee94adf6a81284cebd7a5e71177585e4
parentf23f1516b6757c326cc638bed8c402c77e2a596e (diff)
downloadlinux-604bb7da77803cc01366c85fd5bcbc88b6dbe33a.tar.bz2
pinctrl: SPEAr: Add plgpio driver
Most of SPEAr SoCs, which support pinctrl, can configure & use pads as gpio. This patch adds plgpio driver for configuring these pads as gpio. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-rw-r--r--drivers/pinctrl/spear/Kconfig7
-rw-r--r--drivers/pinctrl/spear/Makefile1
-rw-r--r--drivers/pinctrl/spear/pinctrl-plgpio.c746
3 files changed, 754 insertions, 0 deletions
diff --git a/drivers/pinctrl/spear/Kconfig b/drivers/pinctrl/spear/Kconfig
index 91558791e766..6f9a1e8bf575 100644
--- a/drivers/pinctrl/spear/Kconfig
+++ b/drivers/pinctrl/spear/Kconfig
@@ -41,4 +41,11 @@ config PINCTRL_SPEAR1340
depends on MACH_SPEAR1340
select PINCTRL_SPEAR
+config PINCTRL_SPEAR_PLGPIO
+ bool "SPEAr SoC PLGPIO Controller"
+ depends on GPIOLIB && PINCTRL_SPEAR
+ help
+ Say yes here to support PLGPIO controller on ST Microelectronics SPEAr
+ SoCs.
+
endif
diff --git a/drivers/pinctrl/spear/Makefile b/drivers/pinctrl/spear/Makefile
index b28a7ba22443..0e400ebeb8ff 100644
--- a/drivers/pinctrl/spear/Makefile
+++ b/drivers/pinctrl/spear/Makefile
@@ -1,5 +1,6 @@
# SPEAr pinmux support
+obj-$(CONFIG_PINCTRL_SPEAR_PLGPIO) += pinctrl-plgpio.o
obj-$(CONFIG_PINCTRL_SPEAR) += pinctrl-spear.o
obj-$(CONFIG_PINCTRL_SPEAR3XX) += pinctrl-spear3xx.o
obj-$(CONFIG_PINCTRL_SPEAR300) += pinctrl-spear300.o
diff --git a/drivers/pinctrl/spear/pinctrl-plgpio.c b/drivers/pinctrl/spear/pinctrl-plgpio.c
new file mode 100644
index 000000000000..1044ad3f3c86
--- /dev/null
+++ b/drivers/pinctrl/spear/pinctrl-plgpio.c
@@ -0,0 +1,746 @@
+/*
+ * SPEAr platform PLGPIO driver
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@linaro.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/module.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/spinlock.h>
+#include <asm/mach/irq.h>
+
+#define MAX_GPIO_PER_REG 32
+#define PIN_OFFSET(pin) (pin % MAX_GPIO_PER_REG)
+#define REG_OFFSET(base, reg, pin) (base + reg + (pin / MAX_GPIO_PER_REG) \
+ * sizeof(int *))
+
+/*
+ * plgpio pins in all machines are not one to one mapped, bitwise with registers
+ * bits. These set of macros define register masks for which below functions
+ * (pin_to_offset and offset_to_pin) are required to be called.
+ */
+#define PTO_ENB_REG 0x001
+#define PTO_WDATA_REG 0x002
+#define PTO_DIR_REG 0x004
+#define PTO_IE_REG 0x008
+#define PTO_RDATA_REG 0x010
+#define PTO_MIS_REG 0x020
+
+struct plgpio_regs {
+ u32 enb; /* enable register */
+ u32 wdata; /* write data register */
+ u32 dir; /* direction set register */
+ u32 rdata; /* read data register */
+ u32 ie; /* interrupt enable register */
+ u32 mis; /* mask interrupt status register */
+ u32 eit; /* edge interrupt type */
+};
+
+/*
+ * struct plgpio: plgpio driver specific structure
+ *
+ * lock: lock for guarding gpio registers
+ * base: base address of plgpio block
+ * irq_base: irq number of plgpio0
+ * chip: gpio framework specific chip information structure
+ * p2o: function ptr for pin to offset conversion. This is required only for
+ * machines where mapping b/w pin and offset is not 1-to-1.
+ * o2p: function ptr for offset to pin conversion. This is required only for
+ * machines where mapping b/w pin and offset is not 1-to-1.
+ * p2o_regs: mask of registers for which p2o and o2p are applicable
+ * regs: register offsets
+ * csave_regs: context save registers for standby/sleep/hibernate cases
+ */
+struct plgpio {
+ spinlock_t lock;
+ void __iomem *base;
+ struct clk *clk;
+ unsigned irq_base;
+ struct irq_domain *irq_domain;
+ struct gpio_chip chip;
+ int (*p2o)(int pin); /* pin_to_offset */
+ int (*o2p)(int offset); /* offset_to_pin */
+ u32 p2o_regs;
+ struct plgpio_regs regs;
+#ifdef CONFIG_PM
+ struct plgpio_regs *csave_regs;
+#endif
+};
+
+/* register manipulation inline functions */
+static inline u32 is_plgpio_set(void __iomem *base, u32 pin, u32 reg)
+{
+ u32 offset = PIN_OFFSET(pin);
+ void __iomem *reg_off = REG_OFFSET(base, reg, pin);
+ u32 val = readl_relaxed(reg_off);
+
+ return !!(val & (1 << offset));
+}
+
+static inline void plgpio_reg_set(void __iomem *base, u32 pin, u32 reg)
+{
+ u32 offset = PIN_OFFSET(pin);
+ void __iomem *reg_off = REG_OFFSET(base, reg, pin);
+ u32 val = readl_relaxed(reg_off);
+
+ writel_relaxed(val | (1 << offset), reg_off);
+}
+
+static inline void plgpio_reg_reset(void __iomem *base, u32 pin, u32 reg)
+{
+ u32 offset = PIN_OFFSET(pin);
+ void __iomem *reg_off = REG_OFFSET(base, reg, pin);
+ u32 val = readl_relaxed(reg_off);
+
+ writel_relaxed(val & ~(1 << offset), reg_off);
+}
+
+/* gpio framework specific routines */
+static int plgpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+ struct plgpio *plgpio = container_of(chip, struct plgpio, chip);
+ unsigned long flags;
+
+ /* get correct offset for "offset" pin */
+ if (plgpio->p2o && (plgpio->p2o_regs & PTO_DIR_REG)) {
+ offset = plgpio->p2o(offset);
+ if (offset == -1)
+ return -EINVAL;
+ }
+
+ spin_lock_irqsave(&plgpio->lock, flags);
+ plgpio_reg_set(plgpio->base, offset, plgpio->regs.dir);
+ spin_unlock_irqrestore(&plgpio->lock, flags);
+
+ return 0;
+}
+
+static int plgpio_direction_output(struct gpio_chip *chip, unsigned offset,
+ int value)
+{
+ struct plgpio *plgpio = container_of(chip, struct plgpio, chip);
+ unsigned long flags;
+ unsigned dir_offset = offset, wdata_offset = offset, tmp;
+
+ /* get correct offset for "offset" pin */
+ if (plgpio->p2o && (plgpio->p2o_regs & (PTO_DIR_REG | PTO_WDATA_REG))) {
+ tmp = plgpio->p2o(offset);
+ if (tmp == -1)
+ return -EINVAL;
+
+ if (plgpio->p2o_regs & PTO_DIR_REG)
+ dir_offset = tmp;
+ if (plgpio->p2o_regs & PTO_WDATA_REG)
+ wdata_offset = tmp;
+ }
+
+ spin_lock_irqsave(&plgpio->lock, flags);
+ if (value)
+ plgpio_reg_set(plgpio->base, wdata_offset,
+ plgpio->regs.wdata);
+ else
+ plgpio_reg_reset(plgpio->base, wdata_offset,
+ plgpio->regs.wdata);
+
+ plgpio_reg_reset(plgpio->base, dir_offset, plgpio->regs.dir);
+ spin_unlock_irqrestore(&plgpio->lock, flags);
+
+ return 0;
+}
+
+static int plgpio_get_value(struct gpio_chip *chip, unsigned offset)
+{
+ struct plgpio *plgpio = container_of(chip, struct plgpio, chip);
+
+ if (offset >= chip->ngpio)
+ return -EINVAL;
+
+ /* get correct offset for "offset" pin */
+ if (plgpio->p2o && (plgpio->p2o_regs & PTO_RDATA_REG)) {
+ offset = plgpio->p2o(offset);
+ if (offset == -1)
+ return -EINVAL;
+ }
+
+ return is_plgpio_set(plgpio->base, offset, plgpio->regs.rdata);
+}
+
+static void plgpio_set_value(struct gpio_chip *chip, unsigned offset, int value)
+{
+ struct plgpio *plgpio = container_of(chip, struct plgpio, chip);
+
+ if (offset >= chip->ngpio)
+ return;
+
+ /* get correct offset for "offset" pin */
+ if (plgpio->p2o && (plgpio->p2o_regs & PTO_WDATA_REG)) {
+ offset = plgpio->p2o(offset);
+ if (offset == -1)
+ return;
+ }
+
+ if (value)
+ plgpio_reg_set(plgpio->base, offset, plgpio->regs.wdata);
+ else
+ plgpio_reg_reset(plgpio->base, offset, plgpio->regs.wdata);
+}
+
+static int plgpio_request(struct gpio_chip *chip, unsigned offset)
+{
+ struct plgpio *plgpio = container_of(chip, struct plgpio, chip);
+ int gpio = chip->base + offset;
+ unsigned long flags;
+ int ret = 0;
+
+ if (offset >= chip->ngpio)
+ return -EINVAL;
+
+ ret = pinctrl_request_gpio(gpio);
+ if (ret)
+ return ret;
+
+ if (!IS_ERR(plgpio->clk)) {
+ ret = clk_prepare_enable(plgpio->clk);
+ if (ret)
+ goto err0;
+ }
+
+ if (plgpio->regs.enb == -1)
+ return 0;
+
+ /*
+ * put gpio in IN mode before enabling it. This make enabling gpio safe
+ */
+ ret = plgpio_direction_input(chip, offset);
+ if (ret)
+ goto err1;
+
+ /* get correct offset for "offset" pin */
+ if (plgpio->p2o && (plgpio->p2o_regs & PTO_ENB_REG)) {
+ offset = plgpio->p2o(offset);
+ if (offset == -1) {
+ ret = -EINVAL;
+ goto err1;
+ }
+ }
+
+ spin_lock_irqsave(&plgpio->lock, flags);
+ plgpio_reg_set(plgpio->base, offset, plgpio->regs.enb);
+ spin_unlock_irqrestore(&plgpio->lock, flags);
+ return 0;
+
+err1:
+ clk_disable_unprepare(plgpio->clk);
+err0:
+ pinctrl_free_gpio(gpio);
+ return ret;
+}
+
+static void plgpio_free(struct gpio_chip *chip, unsigned offset)
+{
+ struct plgpio *plgpio = container_of(chip, struct plgpio, chip);
+ int gpio = chip->base + offset;
+ unsigned long flags;
+
+ if (offset >= chip->ngpio)
+ return;
+
+ if (plgpio->regs.enb == -1)
+ goto disable_clk;
+
+ /* get correct offset for "offset" pin */
+ if (plgpio->p2o && (plgpio->p2o_regs & PTO_ENB_REG)) {
+ offset = plgpio->p2o(offset);
+ if (offset == -1)
+ return;
+ }
+
+ spin_lock_irqsave(&plgpio->lock, flags);
+ plgpio_reg_reset(plgpio->base, offset, plgpio->regs.enb);
+ spin_unlock_irqrestore(&plgpio->lock, flags);
+
+disable_clk:
+ if (!IS_ERR(plgpio->clk))
+ clk_disable_unprepare(plgpio->clk);
+
+ pinctrl_free_gpio(gpio);
+}
+
+static int plgpio_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+ struct plgpio *plgpio = container_of(chip, struct plgpio, chip);
+
+ if (plgpio->irq_base < 0)
+ return -EINVAL;
+
+ return irq_find_mapping(plgpio->irq_domain, offset);
+}
+
+/* PLGPIO IRQ */
+static void plgpio_irq_disable(struct irq_data *d)
+{
+ struct plgpio *plgpio = irq_data_get_irq_chip_data(d);
+ int offset = d->irq - plgpio->irq_base;
+ unsigned long flags;
+
+ /* get correct offset for "offset" pin */
+ if (plgpio->p2o && (plgpio->p2o_regs & PTO_IE_REG)) {
+ offset = plgpio->p2o(offset);
+ if (offset == -1)
+ return;
+ }
+
+ spin_lock_irqsave(&plgpio->lock, flags);
+ plgpio_reg_set(plgpio->base, offset, plgpio->regs.ie);
+ spin_unlock_irqrestore(&plgpio->lock, flags);
+}
+
+static void plgpio_irq_enable(struct irq_data *d)
+{
+ struct plgpio *plgpio = irq_data_get_irq_chip_data(d);
+ int offset = d->irq - plgpio->irq_base;
+ unsigned long flags;
+
+ /* get correct offset for "offset" pin */
+ if (plgpio->p2o && (plgpio->p2o_regs & PTO_IE_REG)) {
+ offset = plgpio->p2o(offset);
+ if (offset == -1)
+ return;
+ }
+
+ spin_lock_irqsave(&plgpio->lock, flags);
+ plgpio_reg_reset(plgpio->base, offset, plgpio->regs.ie);
+ spin_unlock_irqrestore(&plgpio->lock, flags);
+}
+
+static int plgpio_irq_set_type(struct irq_data *d, unsigned trigger)
+{
+ struct plgpio *plgpio = irq_data_get_irq_chip_data(d);
+ int offset = d->irq - plgpio->irq_base;
+ void __iomem *reg_off;
+ unsigned int supported_type = 0, val;
+
+ if (offset >= plgpio->chip.ngpio)
+ return -EINVAL;
+
+ if (plgpio->regs.eit == -1)
+ supported_type = IRQ_TYPE_LEVEL_HIGH;
+ else
+ supported_type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
+
+ if (!(trigger & supported_type))
+ return -EINVAL;
+
+ if (plgpio->regs.eit == -1)
+ return 0;
+
+ reg_off = REG_OFFSET(plgpio->base, plgpio->regs.eit, offset);
+ val = readl_relaxed(reg_off);
+
+ offset = PIN_OFFSET(offset);
+ if (trigger & IRQ_TYPE_EDGE_RISING)
+ writel_relaxed(val | (1 << offset), reg_off);
+ else
+ writel_relaxed(val & ~(1 << offset), reg_off);
+
+ return 0;
+}
+
+static struct irq_chip plgpio_irqchip = {
+ .name = "PLGPIO",
+ .irq_enable = plgpio_irq_enable,
+ .irq_disable = plgpio_irq_disable,
+ .irq_set_type = plgpio_irq_set_type,
+};
+
+static void plgpio_irq_handler(unsigned irq, struct irq_desc *desc)
+{
+ struct plgpio *plgpio = irq_get_handler_data(irq);
+ struct irq_chip *irqchip = irq_desc_get_chip(desc);
+ int regs_count, count, pin, offset, i = 0;
+ unsigned long pending;
+
+ count = plgpio->chip.ngpio;
+ regs_count = DIV_ROUND_UP(count, MAX_GPIO_PER_REG);
+
+ chained_irq_enter(irqchip, desc);
+ /* check all plgpio MIS registers for a possible interrupt */
+ for (; i < regs_count; i++) {
+ pending = readl_relaxed(plgpio->base + plgpio->regs.mis +
+ i * sizeof(int *));
+ if (!pending)
+ continue;
+
+ /* clear interrupts */
+ writel_relaxed(~pending, plgpio->base + plgpio->regs.mis +
+ i * sizeof(int *));
+ /*
+ * clear extra bits in last register having gpios < MAX/REG
+ * ex: Suppose there are max 102 plgpios. then last register
+ * must have only (102 - MAX_GPIO_PER_REG * 3) = 6 relevant bits
+ * so, we must not take other 28 bits into consideration for
+ * checking interrupt. so clear those bits.
+ */
+ count = count - i * MAX_GPIO_PER_REG;
+ if (count < MAX_GPIO_PER_REG)
+ pending &= (1 << count) - 1;
+
+ for_each_set_bit(offset, &pending, MAX_GPIO_PER_REG) {
+ /* get correct pin for "offset" */
+ if (plgpio->o2p && (plgpio->p2o_regs & PTO_MIS_REG)) {
+ pin = plgpio->o2p(offset);
+ if (pin == -1)
+ continue;
+ } else
+ pin = offset;
+
+ /* get correct irq line number */
+ pin = i * MAX_GPIO_PER_REG + pin;
+ generic_handle_irq(plgpio_to_irq(&plgpio->chip, pin));
+ }
+ }
+ chained_irq_exit(irqchip, desc);
+}
+
+/*
+ * pin to offset and offset to pin converter functions
+ *
+ * In spear310 there is inconsistency among bit positions in plgpio regiseters,
+ * for different plgpio pins. For example: for pin 27, bit offset is 23, pin
+ * 28-33 are not supported, pin 95 has offset bit 95, bit 100 has offset bit 1
+ */
+static int spear310_p2o(int pin)
+{
+ int offset = pin;
+
+ if (pin <= 27)
+ offset += 4;
+ else if (pin <= 33)
+ offset = -1;
+ else if (pin <= 97)
+ offset -= 2;
+ else if (pin <= 101)
+ offset = 101 - pin;
+ else
+ offset = -1;
+
+ return offset;
+}
+
+int spear310_o2p(int offset)
+{
+ if (offset <= 3)
+ return 101 - offset;
+ else if (offset <= 31)
+ return offset - 4;
+ else
+ return offset + 2;
+}
+
+static int __devinit plgpio_probe_dt(struct platform_device *pdev,
+ struct plgpio *plgpio)
+{
+ struct device_node *np = pdev->dev.of_node;
+ int ret = -EINVAL;
+ u32 val;
+
+ if (of_machine_is_compatible("st,spear310")) {
+ plgpio->p2o = spear310_p2o;
+ plgpio->o2p = spear310_o2p;
+ plgpio->p2o_regs = PTO_WDATA_REG | PTO_DIR_REG | PTO_IE_REG |
+ PTO_RDATA_REG | PTO_MIS_REG;
+ }
+
+ if (!of_property_read_u32(np, "st-plgpio,ngpio", &val)) {
+ plgpio->chip.ngpio = val;
+ } else {
+ dev_err(&pdev->dev, "DT: Invalid ngpio field\n");
+ goto end;
+ }
+
+ if (!of_property_read_u32(np, "st-plgpio,enb-reg", &val))
+ plgpio->regs.enb = val;
+ else
+ plgpio->regs.enb = -1;
+
+ if (!of_property_read_u32(np, "st-plgpio,wdata-reg", &val)) {
+ plgpio->regs.wdata = val;
+ } else {
+ dev_err(&pdev->dev, "DT: Invalid wdata reg\n");
+ goto end;
+ }
+
+ if (!of_property_read_u32(np, "st-plgpio,dir-reg", &val)) {
+ plgpio->regs.dir = val;
+ } else {
+ dev_err(&pdev->dev, "DT: Invalid dir reg\n");
+ goto end;
+ }
+
+ if (!of_property_read_u32(np, "st-plgpio,ie-reg", &val)) {
+ plgpio->regs.ie = val;
+ } else {
+ dev_err(&pdev->dev, "DT: Invalid ie reg\n");
+ goto end;
+ }
+
+ if (!of_property_read_u32(np, "st-plgpio,rdata-reg", &val)) {
+ plgpio->regs.rdata = val;
+ } else {
+ dev_err(&pdev->dev, "DT: Invalid rdata reg\n");
+ goto end;
+ }
+
+ if (!of_property_read_u32(np, "st-plgpio,mis-reg", &val)) {
+ plgpio->regs.mis = val;
+ } else {
+ dev_err(&pdev->dev, "DT: Invalid mis reg\n");
+ goto end;
+ }
+
+ if (!of_property_read_u32(np, "st-plgpio,eit-reg", &val))
+ plgpio->regs.eit = val;
+ else
+ plgpio->regs.eit = -1;
+
+ return 0;
+
+end:
+ return ret;
+}
+static int __devinit plgpio_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct plgpio *plgpio;
+ struct resource *res;
+ int ret, irq, i;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(&pdev->dev, "invalid IORESOURCE_MEM\n");
+ return -EBUSY;
+ }
+
+ plgpio = devm_kzalloc(&pdev->dev, sizeof(*plgpio), GFP_KERNEL);
+ if (!plgpio) {
+ dev_err(&pdev->dev, "memory allocation fail\n");
+ return -ENOMEM;
+ }
+
+ plgpio->base = devm_request_and_ioremap(&pdev->dev, res);
+ if (!plgpio->base) {
+ dev_err(&pdev->dev, "request and ioremap fail\n");
+ return -ENOMEM;
+ }
+
+ ret = plgpio_probe_dt(pdev, plgpio);
+ if (ret) {
+ dev_err(&pdev->dev, "DT probe failed\n");
+ return ret;
+ }
+
+ plgpio->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(plgpio->clk))
+ dev_warn(&pdev->dev, "clk_get() failed, work without it\n");
+
+#ifdef CONFIG_PM
+ plgpio->csave_regs = devm_kzalloc(&pdev->dev,
+ sizeof(*plgpio->csave_regs) *
+ DIV_ROUND_UP(plgpio->chip.ngpio, MAX_GPIO_PER_REG),
+ GFP_KERNEL);
+ if (!plgpio->csave_regs) {
+ dev_err(&pdev->dev, "csave registers memory allocation fail\n");
+ return -ENOMEM;
+ }
+#endif
+
+ platform_set_drvdata(pdev, plgpio);
+ spin_lock_init(&plgpio->lock);
+
+ plgpio->irq_base = -1;
+ plgpio->chip.base = -1;
+ plgpio->chip.request = plgpio_request;
+ plgpio->chip.free = plgpio_free;
+ plgpio->chip.direction_input = plgpio_direction_input;
+ plgpio->chip.direction_output = plgpio_direction_output;
+ plgpio->chip.get = plgpio_get_value;
+ plgpio->chip.set = plgpio_set_value;
+ plgpio->chip.to_irq = plgpio_to_irq;
+ plgpio->chip.label = dev_name(&pdev->dev);
+ plgpio->chip.dev = &pdev->dev;
+ plgpio->chip.owner = THIS_MODULE;
+
+ ret = gpiochip_add(&plgpio->chip);
+ if (ret) {
+ dev_err(&pdev->dev, "unable to add gpio chip\n");
+ return ret;
+ }
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ dev_info(&pdev->dev, "irqs not supported\n");
+ return 0;
+ }
+
+ plgpio->irq_base = irq_alloc_descs(-1, 0, plgpio->chip.ngpio, 0);
+ if (IS_ERR_VALUE(plgpio->irq_base)) {
+ /* we would not support irq for gpio */
+ dev_warn(&pdev->dev, "couldn't allocate irq base\n");
+ return 0;
+ }
+
+ plgpio->irq_domain = irq_domain_add_legacy(np, plgpio->chip.ngpio,
+ plgpio->irq_base, 0, &irq_domain_simple_ops, NULL);
+ if (WARN_ON(!plgpio->irq_domain)) {
+ dev_err(&pdev->dev, "irq domain init failed\n");
+ irq_free_descs(plgpio->irq_base, plgpio->chip.ngpio);
+ ret = -ENXIO;
+ goto remove_gpiochip;
+ }
+
+ irq_set_chained_handler(irq, plgpio_irq_handler);
+ for (i = 0; i < plgpio->chip.ngpio; i++) {
+ irq_set_chip_and_handler(i + plgpio->irq_base, &plgpio_irqchip,
+ handle_simple_irq);
+ set_irq_flags(i + plgpio->irq_base, IRQF_VALID);
+ irq_set_chip_data(i + plgpio->irq_base, plgpio);
+ }
+
+ irq_set_handler_data(irq, plgpio);
+ dev_info(&pdev->dev, "PLGPIO registered with IRQs\n");
+
+ return 0;
+
+remove_gpiochip:
+ dev_info(&pdev->dev, "Remove gpiochip\n");
+ if (gpiochip_remove(&plgpio->chip))
+ dev_err(&pdev->dev, "unable to remove gpiochip\n");
+
+ return ret;
+}
+
+#ifdef CONFIG_PM
+static int plgpio_suspend(struct device *dev)
+{
+ struct plgpio *plgpio = dev_get_drvdata(dev);
+ int i, reg_count = DIV_ROUND_UP(plgpio->chip.ngpio, MAX_GPIO_PER_REG);
+ void __iomem *off;
+
+ for (i = 0; i < reg_count; i++) {
+ off = plgpio->base + i * sizeof(int *);
+
+ if (plgpio->regs.enb != -1)
+ plgpio->csave_regs[i].enb =
+ readl_relaxed(plgpio->regs.enb + off);
+ if (plgpio->regs.eit != -1)
+ plgpio->csave_regs[i].eit =
+ readl_relaxed(plgpio->regs.eit + off);
+ plgpio->csave_regs[i].wdata = readl_relaxed(plgpio->regs.wdata +
+ off);
+ plgpio->csave_regs[i].dir = readl_relaxed(plgpio->regs.dir +
+ off);
+ plgpio->csave_regs[i].ie = readl_relaxed(plgpio->regs.ie + off);
+ }
+
+ return 0;
+}
+
+/*
+ * This is used to correct the values in end registers. End registers contain
+ * extra bits that might be used for other purpose in platform. So, we shouldn't
+ * overwrite these bits. This macro, reads given register again, preserves other
+ * bit values (non-plgpio bits), and retain captured value (plgpio bits).
+ */
+#define plgpio_prepare_reg(__reg, _off, _mask, _tmp) \
+{ \
+ _tmp = readl_relaxed(plgpio->regs.__reg + _off); \
+ _tmp &= ~_mask; \
+ plgpio->csave_regs[i].__reg = \
+ _tmp | (plgpio->csave_regs[i].__reg & _mask); \
+}
+
+static int plgpio_resume(struct device *dev)
+{
+ struct plgpio *plgpio = dev_get_drvdata(dev);
+ int i, reg_count = DIV_ROUND_UP(plgpio->chip.ngpio, MAX_GPIO_PER_REG);
+ void __iomem *off;
+ u32 mask, tmp;
+
+ for (i = 0; i < reg_count; i++) {
+ off = plgpio->base + i * sizeof(int *);
+
+ if (i == reg_count - 1) {
+ mask = (1 << (plgpio->chip.ngpio - i *
+ MAX_GPIO_PER_REG)) - 1;
+
+ if (plgpio->regs.enb != -1)
+ plgpio_prepare_reg(enb, off, mask, tmp);
+
+ if (plgpio->regs.eit != -1)
+ plgpio_prepare_reg(eit, off, mask, tmp);
+
+ plgpio_prepare_reg(wdata, off, mask, tmp);
+ plgpio_prepare_reg(dir, off, mask, tmp);
+ plgpio_prepare_reg(ie, off, mask, tmp);
+ }
+
+ writel_relaxed(plgpio->csave_regs[i].wdata, plgpio->regs.wdata +
+ off);
+ writel_relaxed(plgpio->csave_regs[i].dir, plgpio->regs.dir +
+ off);
+
+ if (plgpio->regs.eit != -1)
+ writel_relaxed(plgpio->csave_regs[i].eit,
+ plgpio->regs.eit + off);
+
+ writel_relaxed(plgpio->csave_regs[i].ie, plgpio->regs.ie + off);
+
+ if (plgpio->regs.enb != -1)
+ writel_relaxed(plgpio->csave_regs[i].enb,
+ plgpio->regs.enb + off);
+ }
+
+ return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(plgpio_dev_pm_ops, plgpio_suspend, plgpio_resume);
+
+static const struct of_device_id plgpio_of_match[] = {
+ { .compatible = "st,spear-plgpio" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, plgpio_of_match);
+
+static struct platform_driver plgpio_driver = {
+ .probe = plgpio_probe,
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "spear-plgpio",
+ .pm = &plgpio_dev_pm_ops,
+ .of_match_table = of_match_ptr(plgpio_of_match),
+ },
+};
+
+static int __init plgpio_init(void)
+{
+ return platform_driver_register(&plgpio_driver);
+}
+subsys_initcall(plgpio_init);
+
+MODULE_AUTHOR("Viresh Kumar <viresh.kumar@linaro.org>");
+MODULE_DESCRIPTION("ST Microlectronics SPEAr PLGPIO driver");
+MODULE_LICENSE("GPL");