diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2014-09-06 12:37:43 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2014-09-06 12:37:43 -0700 |
commit | 56c228546ed866d46cf957674f7ecb39eb2b2b56 (patch) | |
tree | 0874cb8d3bab621fc700b16899025fd67bfcf202 | |
parent | 11e9739813a753748dd54c905e779dc277efc495 (diff) | |
parent | 389710837f684b397ecea7e66a3a87f16e1542de (diff) | |
download | linux-56c228546ed866d46cf957674f7ecb39eb2b2b56.tar.bz2 |
Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Kevin Hilman:
"Another round of fixes from arm-soc land, which are mostly DT fixes
for:
- OMAP: handful of DT fixes devices on newly supported hardware
- davinci: fix 2nd EDMA channel
- ux500: extend previous pinctrl fix to another board
- at91: clock registration fixes, compatibility string precision
And one more fix for event cleanup in drivers/bus/arm-ccn"
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
bus: arm-ccn: Move event cleanup routine
ARM: at91/dt: rm9200: fix usb clock definition
ARM: at91: rm9200: fix clock registration
ARM: at91/dt: sam9g20: set at91sam9g20 pllb driver
ARM: dts: dra7-evm: Add vtt regulator support
ARM: dts: dra7-evm: Fix spi1 mux documentation
ARM: dts: am43x-epos-evm: Disable QSPI to prevent conflict with GPMC-NAND
ARM: OMAP2+: gpmc: Don't complain if wait pin is used without r/w monitoring
ARM: dts: am43xx-epos-evm: Don't use read/write wait monitoring
ARM: dts: am437x-gp-evm: Don't use read/write wait monitoring
ARM: dts: am437x-gp-evm: Use BCH16 ECC scheme instead of BCH8
ARM: dts: am43x-epos-evm: Use BCH16 ECC scheme instead of BCH8
ARM: dts: am4372: fix USB regs size
ARM: dts: am437x-gp: switch i2c0 to 100KHz
ARM: dts: dra7-evm: Fix 8th NAND partition's name
ARM: dts: dra7-evm: Fix i2c3 pinmux and frequency
ARM: ux500: disable msp2 node on Snowball
ARM: edma: Fix configuration parsing for SoCs with multiple eDMA3 CC
ARM: dts: set 'ti,set-rate-parent' for dpll4_m5x2 clock
-rw-r--r-- | arch/arm/boot/dts/am4372.dtsi | 4 | ||||
-rw-r--r-- | arch/arm/boot/dts/am437x-gp-evm.dts | 6 | ||||
-rw-r--r-- | arch/arm/boot/dts/am43x-epos-evm.dts | 9 | ||||
-rw-r--r-- | arch/arm/boot/dts/at91rm9200.dtsi | 2 | ||||
-rw-r--r-- | arch/arm/boot/dts/at91sam9g20.dtsi | 1 | ||||
-rw-r--r-- | arch/arm/boot/dts/dra7-evm.dts | 47 | ||||
-rw-r--r-- | arch/arm/boot/dts/omap3xxx-clocks.dtsi | 1 | ||||
-rw-r--r-- | arch/arm/boot/dts/ste-snowball.dts | 1 | ||||
-rw-r--r-- | arch/arm/common/edma.c | 9 | ||||
-rw-r--r-- | arch/arm/mach-at91/board-dt-rm9200.c | 11 | ||||
-rw-r--r-- | arch/arm/mach-omap2/gpmc.c | 7 | ||||
-rw-r--r-- | drivers/bus/arm-ccn.c | 51 |
12 files changed, 90 insertions, 59 deletions
diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index 9b3d2ba82f13..8689949bdba3 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -804,7 +804,7 @@ usb1: usb@48390000 { compatible = "synopsys,dwc3"; - reg = <0x48390000 0x17000>; + reg = <0x48390000 0x10000>; interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; phys = <&usb2_phy1>; phy-names = "usb2-phy"; @@ -826,7 +826,7 @@ usb2: usb@483d0000 { compatible = "synopsys,dwc3"; - reg = <0x483d0000 0x17000>; + reg = <0x483d0000 0x10000>; interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; phys = <&usb2_phy2>; phy-names = "usb2-phy"; diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts index 646a6eade788..e7ac47fa6615 100644 --- a/arch/arm/boot/dts/am437x-gp-evm.dts +++ b/arch/arm/boot/dts/am437x-gp-evm.dts @@ -260,7 +260,7 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins>; - clock-frequency = <400000>; + clock-frequency = <100000>; tps65218: tps65218@24 { reg = <0x24>; @@ -424,7 +424,7 @@ ranges = <0 0 0 0x01000000>; /* minimum GPMC partition = 16MB */ nand@0,0 { reg = <0 0 4>; /* device IO registers */ - ti,nand-ecc-opt = "bch8"; + ti,nand-ecc-opt = "bch16"; ti,elm-id = <&elm>; nand-bus-width = <8>; gpmc,device-width = <1>; @@ -443,8 +443,6 @@ gpmc,rd-cycle-ns = <40>; gpmc,wr-cycle-ns = <40>; gpmc,wait-pin = <0>; - gpmc,wait-on-read; - gpmc,wait-on-write; gpmc,bus-turnaround-ns = <0>; gpmc,cycle2cycle-delay-ns = <0>; gpmc,clk-activation-ns = <0>; diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts index ed7dd2395915..ac3e4859935f 100644 --- a/arch/arm/boot/dts/am43x-epos-evm.dts +++ b/arch/arm/boot/dts/am43x-epos-evm.dts @@ -435,13 +435,13 @@ }; &gpmc { - status = "okay"; + status = "okay"; /* Disable QSPI when enabling GPMC (NAND) */ pinctrl-names = "default"; pinctrl-0 = <&nand_flash_x8>; ranges = <0 0 0x08000000 0x10000000>; /* CS0: NAND */ nand@0,0 { reg = <0 0 0>; /* CS0, offset 0 */ - ti,nand-ecc-opt = "bch8"; + ti,nand-ecc-opt = "bch16"; ti,elm-id = <&elm>; nand-bus-width = <8>; gpmc,device-width = <1>; @@ -459,8 +459,7 @@ gpmc,access-ns = <30>; /* tCEA + 4*/ gpmc,rd-cycle-ns = <40>; gpmc,wr-cycle-ns = <40>; - gpmc,wait-on-read = "true"; - gpmc,wait-on-write = "true"; + gpmc,wait-pin = <0>; gpmc,bus-turnaround-ns = <0>; gpmc,cycle2cycle-delay-ns = <0>; gpmc,clk-activation-ns = <0>; @@ -557,7 +556,7 @@ }; &qspi { - status = "okay"; + status = "disabled"; /* Disable GPMC (NAND) when enabling QSPI */ pinctrl-names = "default"; pinctrl-0 = <&qspi1_default>; diff --git a/arch/arm/boot/dts/at91rm9200.dtsi b/arch/arm/boot/dts/at91rm9200.dtsi index 65ccf564b9a5..6c97d4af61ee 100644 --- a/arch/arm/boot/dts/at91rm9200.dtsi +++ b/arch/arm/boot/dts/at91rm9200.dtsi @@ -149,7 +149,7 @@ usb: usbck { compatible = "atmel,at91rm9200-clk-usb"; #clock-cells = <0>; - atmel,clk-divisors = <1 2>; + atmel,clk-divisors = <1 2 0 0>; clocks = <&pllb>; }; diff --git a/arch/arm/boot/dts/at91sam9g20.dtsi b/arch/arm/boot/dts/at91sam9g20.dtsi index 31f7652612fc..4e0abbd9d655 100644 --- a/arch/arm/boot/dts/at91sam9g20.dtsi +++ b/arch/arm/boot/dts/at91sam9g20.dtsi @@ -40,6 +40,7 @@ }; pllb: pllbck { + compatible = "atmel,at91sam9g20-clk-pllb"; atmel,clk-input-range = <2000000 32000000>; atmel,pll-clk-output-ranges = <30000000 100000000 0 0>; }; diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index 50f8022905a1..e03fbf3c6889 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -8,6 +8,7 @@ /dts-v1/; #include "dra74x.dtsi" +#include <dt-bindings/gpio/gpio.h> / { model = "TI DRA742"; @@ -24,9 +25,29 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; + + vtt_fixed: fixedregulator-vtt { + compatible = "regulator-fixed"; + regulator-name = "vtt_fixed"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + enable-active-high; + gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>; + }; }; &dra7_pmx_core { + pinctrl-names = "default"; + pinctrl-0 = <&vtt_pin>; + + vtt_pin: pinmux_vtt_pin { + pinctrl-single,pins = < + 0x3b4 (PIN_OUTPUT | MUX_MODE14) /* spi1_cs1.gpio7_11 */ + >; + }; + i2c1_pins: pinmux_i2c1_pins { pinctrl-single,pins = < 0x400 (PIN_INPUT | MUX_MODE0) /* i2c1_sda */ @@ -43,20 +64,19 @@ i2c3_pins: pinmux_i2c3_pins { pinctrl-single,pins = < - 0x410 (PIN_INPUT | MUX_MODE0) /* i2c3_sda */ - 0x414 (PIN_INPUT | MUX_MODE0) /* i2c3_scl */ + 0x288 (PIN_INPUT | MUX_MODE9) /* gpio6_14.i2c3_sda */ + 0x28c (PIN_INPUT | MUX_MODE9) /* gpio6_15.i2c3_scl */ >; }; mcspi1_pins: pinmux_mcspi1_pins { pinctrl-single,pins = < - 0x3a4 (PIN_INPUT | MUX_MODE0) /* spi2_clk */ - 0x3a8 (PIN_INPUT | MUX_MODE0) /* spi2_d1 */ - 0x3ac (PIN_INPUT | MUX_MODE0) /* spi2_d0 */ - 0x3b0 (PIN_INPUT_SLEW | MUX_MODE0) /* spi2_cs0 */ - 0x3b4 (PIN_INPUT_SLEW | MUX_MODE0) /* spi2_cs1 */ - 0x3b8 (PIN_INPUT_SLEW | MUX_MODE6) /* spi2_cs2 */ - 0x3bc (PIN_INPUT_SLEW | MUX_MODE6) /* spi2_cs3 */ + 0x3a4 (PIN_INPUT | MUX_MODE0) /* spi1_sclk */ + 0x3a8 (PIN_INPUT | MUX_MODE0) /* spi1_d1 */ + 0x3ac (PIN_INPUT | MUX_MODE0) /* spi1_d0 */ + 0x3b0 (PIN_INPUT_SLEW | MUX_MODE0) /* spi1_cs0 */ + 0x3b8 (PIN_INPUT_SLEW | MUX_MODE6) /* spi1_cs2.hdmi1_hpd */ + 0x3bc (PIN_INPUT_SLEW | MUX_MODE6) /* spi1_cs3.hdmi1_cec */ >; }; @@ -284,7 +304,7 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&i2c3_pins>; - clock-frequency = <3400000>; + clock-frequency = <400000>; }; &mcspi1 { @@ -483,7 +503,7 @@ reg = <0x001c0000 0x00020000>; }; partition@7 { - label = "NAND.u-boot-env"; + label = "NAND.u-boot-env.backup1"; reg = <0x001e0000 0x00020000>; }; partition@8 { @@ -504,3 +524,8 @@ &usb2_phy2 { phy-supply = <&ldousb_reg>; }; + +&gpio7 { + ti,no-reset-on-init; + ti,no-idle-on-init; +}; diff --git a/arch/arm/boot/dts/omap3xxx-clocks.dtsi b/arch/arm/boot/dts/omap3xxx-clocks.dtsi index e47ff69dcf70..5c375003bad1 100644 --- a/arch/arm/boot/dts/omap3xxx-clocks.dtsi +++ b/arch/arm/boot/dts/omap3xxx-clocks.dtsi @@ -467,6 +467,7 @@ ti,bit-shift = <0x1e>; reg = <0x0d00>; ti,set-bit-to-disable; + ti,set-rate-parent; }; dpll4_m6_ck: dpll4_m6_ck { diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts index 4a2000c620ad..3e97a669f15e 100644 --- a/arch/arm/boot/dts/ste-snowball.dts +++ b/arch/arm/boot/dts/ste-snowball.dts @@ -116,7 +116,6 @@ msp2: msp@80117000 { pinctrl-names = "default"; pinctrl-0 = <&msp2_default_mode>; - status = "okay"; }; msp3: msp@80125000 { diff --git a/arch/arm/common/edma.c b/arch/arm/common/edma.c index 88099175fc56..d86771abbf57 100644 --- a/arch/arm/common/edma.c +++ b/arch/arm/common/edma.c @@ -1443,14 +1443,14 @@ void edma_assign_channel_eventq(unsigned channel, enum dma_event_q eventq_no) EXPORT_SYMBOL(edma_assign_channel_eventq); static int edma_setup_from_hw(struct device *dev, struct edma_soc_info *pdata, - struct edma *edma_cc) + struct edma *edma_cc, int cc_id) { int i; u32 value, cccfg; s8 (*queue_priority_map)[2]; /* Decode the eDMA3 configuration from CCCFG register */ - cccfg = edma_read(0, EDMA_CCCFG); + cccfg = edma_read(cc_id, EDMA_CCCFG); value = GET_NUM_REGN(cccfg); edma_cc->num_region = BIT(value); @@ -1464,7 +1464,8 @@ static int edma_setup_from_hw(struct device *dev, struct edma_soc_info *pdata, value = GET_NUM_EVQUE(cccfg); edma_cc->num_tc = value + 1; - dev_dbg(dev, "eDMA3 HW configuration (cccfg: 0x%08x):\n", cccfg); + dev_dbg(dev, "eDMA3 CC%d HW configuration (cccfg: 0x%08x):\n", cc_id, + cccfg); dev_dbg(dev, "num_region: %u\n", edma_cc->num_region); dev_dbg(dev, "num_channel: %u\n", edma_cc->num_channels); dev_dbg(dev, "num_slot: %u\n", edma_cc->num_slots); @@ -1684,7 +1685,7 @@ static int edma_probe(struct platform_device *pdev) return -ENOMEM; /* Get eDMA3 configuration from IP */ - ret = edma_setup_from_hw(dev, info[j], edma_cc[j]); + ret = edma_setup_from_hw(dev, info[j], edma_cc[j], j); if (ret) return ret; diff --git a/arch/arm/mach-at91/board-dt-rm9200.c b/arch/arm/mach-at91/board-dt-rm9200.c index 3a185faee795..f4b6e91843e4 100644 --- a/arch/arm/mach-at91/board-dt-rm9200.c +++ b/arch/arm/mach-at91/board-dt-rm9200.c @@ -14,6 +14,7 @@ #include <linux/gpio.h> #include <linux/of.h> #include <linux/of_irq.h> +#include <linux/clk-provider.h> #include <asm/setup.h> #include <asm/irq.h> @@ -35,13 +36,21 @@ static void __init at91rm9200_dt_init_irq(void) of_irq_init(irq_of_match); } +static void __init at91rm9200_dt_timer_init(void) +{ +#if defined(CONFIG_COMMON_CLK) + of_clk_init(NULL); +#endif + at91rm9200_timer_init(); +} + static const char *at91rm9200_dt_board_compat[] __initdata = { "atmel,at91rm9200", NULL }; DT_MACHINE_START(at91rm9200_dt, "Atmel AT91RM9200 (Device Tree)") - .init_time = at91rm9200_timer_init, + .init_time = at91rm9200_dt_timer_init, .map_io = at91_map_io, .handle_irq = at91_aic_handle_irq, .init_early = at91rm9200_dt_initialize, diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index 9f42d5437fcc..2f97228f188a 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -1207,8 +1207,7 @@ int gpmc_cs_program_settings(int cs, struct gpmc_settings *p) } } - if ((p->wait_on_read || p->wait_on_write) && - (p->wait_pin > gpmc_nr_waitpins)) { + if (p->wait_pin > gpmc_nr_waitpins) { pr_err("%s: invalid wait-pin (%d)\n", __func__, p->wait_pin); return -EINVAL; } @@ -1288,8 +1287,8 @@ void gpmc_read_settings_dt(struct device_node *np, struct gpmc_settings *p) p->wait_on_write = of_property_read_bool(np, "gpmc,wait-on-write"); if (!p->wait_on_read && !p->wait_on_write) - pr_warn("%s: read/write wait monitoring not enabled!\n", - __func__); + pr_debug("%s: rd/wr wait monitoring not enabled!\n", + __func__); } } diff --git a/drivers/bus/arm-ccn.c b/drivers/bus/arm-ccn.c index 6f550d9e7a2d..a60f26400705 100644 --- a/drivers/bus/arm-ccn.c +++ b/drivers/bus/arm-ccn.c @@ -586,6 +586,30 @@ static int arm_ccn_pmu_type_eq(u32 a, u32 b) return 0; } +static void arm_ccn_pmu_event_destroy(struct perf_event *event) +{ + struct arm_ccn *ccn = pmu_to_arm_ccn(event->pmu); + struct hw_perf_event *hw = &event->hw; + + if (hw->idx == CCN_IDX_PMU_CYCLE_COUNTER) { + clear_bit(CCN_IDX_PMU_CYCLE_COUNTER, ccn->dt.pmu_counters_mask); + } else { + struct arm_ccn_component *source = + ccn->dt.pmu_counters[hw->idx].source; + + if (CCN_CONFIG_TYPE(event->attr.config) == CCN_TYPE_XP && + CCN_CONFIG_EVENT(event->attr.config) == + CCN_EVENT_WATCHPOINT) + clear_bit(hw->config_base, source->xp.dt_cmp_mask); + else + clear_bit(hw->config_base, source->pmu_events_mask); + clear_bit(hw->idx, ccn->dt.pmu_counters_mask); + } + + ccn->dt.pmu_counters[hw->idx].source = NULL; + ccn->dt.pmu_counters[hw->idx].event = NULL; +} + static int arm_ccn_pmu_event_init(struct perf_event *event) { struct arm_ccn *ccn; @@ -599,6 +623,7 @@ static int arm_ccn_pmu_event_init(struct perf_event *event) return -ENOENT; ccn = pmu_to_arm_ccn(event->pmu); + event->destroy = arm_ccn_pmu_event_destroy; if (hw->sample_period) { dev_warn(ccn->dev, "Sampling not supported!\n"); @@ -731,30 +756,6 @@ static int arm_ccn_pmu_event_init(struct perf_event *event) return 0; } -static void arm_ccn_pmu_event_free(struct perf_event *event) -{ - struct arm_ccn *ccn = pmu_to_arm_ccn(event->pmu); - struct hw_perf_event *hw = &event->hw; - - if (hw->idx == CCN_IDX_PMU_CYCLE_COUNTER) { - clear_bit(CCN_IDX_PMU_CYCLE_COUNTER, ccn->dt.pmu_counters_mask); - } else { - struct arm_ccn_component *source = - ccn->dt.pmu_counters[hw->idx].source; - - if (CCN_CONFIG_TYPE(event->attr.config) == CCN_TYPE_XP && - CCN_CONFIG_EVENT(event->attr.config) == - CCN_EVENT_WATCHPOINT) - clear_bit(hw->config_base, source->xp.dt_cmp_mask); - else - clear_bit(hw->config_base, source->pmu_events_mask); - clear_bit(hw->idx, ccn->dt.pmu_counters_mask); - } - - ccn->dt.pmu_counters[hw->idx].source = NULL; - ccn->dt.pmu_counters[hw->idx].event = NULL; -} - static u64 arm_ccn_pmu_read_counter(struct arm_ccn *ccn, int idx) { u64 res; @@ -1027,8 +1028,6 @@ static int arm_ccn_pmu_event_add(struct perf_event *event, int flags) static void arm_ccn_pmu_event_del(struct perf_event *event, int flags) { arm_ccn_pmu_event_stop(event, PERF_EF_UPDATE); - - arm_ccn_pmu_event_free(event); } static void arm_ccn_pmu_event_read(struct perf_event *event) |