summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2015-02-11 10:28:45 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2015-02-11 10:28:45 -0800
commit540a7c5061f10a07748c89b6741af90db1a07252 (patch)
tree27285b973326f894980e029cb5f726e8865e1443
parent718749d56214aa97015fe01b76b6d6dd0c171796 (diff)
parent9c4a6b1e42801343535ccab4c190019d9975cce8 (diff)
downloadlinux-540a7c5061f10a07748c89b6741af90db1a07252.tar.bz2
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull first round of SCSI updates from James Bottomley: "This is the usual grab bag of driver updates (hpsa, storvsc, mp2sas, megaraid_sas, ses) plus an assortment of minor updates. There's also an update to ufs which adds new phy drivers and finally a new logging infrastructure for SCSI" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (114 commits) scsi_logging: return void for dev_printk() functions scsi: print single-character strings with seq_putc scsi: merge consecutive seq_puts calls scsi: replace seq_printf with seq_puts aha152x: replace seq_printf with seq_puts advansys: replace seq_printf with seq_puts scsi: remove SPRINTF macro sg: remove an unused variable hpsa: Use local workqueues instead of system workqueues hpsa: add in P840ar controller model name hpsa: add in gen9 controller model names hpsa: detect and report failures changing controller transport modes hpsa: shorten the wait for the CISS doorbell mode change ack hpsa: refactor duplicated scan completion code into a new routine hpsa: move SG descriptor set-up out of hpsa_scatter_gather() hpsa: do not use function pointers in fast path command submission hpsa: print CDBs instead of kernel virtual addresses for uncommon errors hpsa: do not use a void pointer for scsi_cmd field of struct CommandList hpsa: return failed from device reset/abort handlers hpsa: check for ctlr lockup after command allocation in main io path ...
-rw-r--r--drivers/ata/libata-eh.c20
-rw-r--r--drivers/misc/enclosure.c108
-rw-r--r--drivers/phy/Kconfig7
-rw-r--r--drivers/phy/Makefile3
-rw-r--r--drivers/phy/phy-qcom-ufs-i.h159
-rw-r--r--drivers/phy/phy-qcom-ufs-qmp-14nm.c201
-rw-r--r--drivers/phy/phy-qcom-ufs-qmp-14nm.h177
-rw-r--r--drivers/phy/phy-qcom-ufs-qmp-20nm.c257
-rw-r--r--drivers/phy/phy-qcom-ufs-qmp-20nm.h235
-rw-r--r--drivers/phy/phy-qcom-ufs.c745
-rw-r--r--drivers/scsi/3w-9xxx.c3
-rw-r--r--drivers/scsi/BusLogic.c10
-rw-r--r--drivers/scsi/Kconfig4
-rw-r--r--drivers/scsi/Makefile6
-rw-r--r--drivers/scsi/NCR5380.c20
-rw-r--r--drivers/scsi/advansys.c142
-rw-r--r--drivers/scsi/aha152x.c295
-rw-r--r--drivers/scsi/aic7xxx/aic79xx_proc.c38
-rw-r--r--drivers/scsi/aic7xxx/aic7xxx_proc.c24
-rw-r--r--drivers/scsi/arm/fas216.c6
-rw-r--r--drivers/scsi/atari_NCR5380.c4
-rw-r--r--drivers/scsi/atp870u.c5
-rw-r--r--drivers/scsi/ch.c6
-rw-r--r--drivers/scsi/constants.c275
-rw-r--r--drivers/scsi/dc395x.c79
-rw-r--r--drivers/scsi/dpt_i2o.c2
-rw-r--r--drivers/scsi/eata_pio.c2
-rw-r--r--drivers/scsi/esas2r/esas2r_main.c2
-rw-r--r--drivers/scsi/esp_scsi.c2
-rw-r--r--drivers/scsi/gdth_proc.c24
-rw-r--r--drivers/scsi/hpsa.c1798
-rw-r--r--drivers/scsi/hpsa.h61
-rw-r--r--drivers/scsi/hpsa_cmd.h334
-rw-r--r--drivers/scsi/in2000.c18
-rw-r--r--drivers/scsi/ips.c7
-rw-r--r--drivers/scsi/lpfc/lpfc_els.c9
-rw-r--r--drivers/scsi/megaraid.c2
-rw-r--r--drivers/scsi/megaraid/megaraid_sas.h66
-rw-r--r--drivers/scsi/megaraid/megaraid_sas_base.c188
-rw-r--r--drivers/scsi/megaraid/megaraid_sas_fp.c17
-rw-r--r--drivers/scsi/megaraid/megaraid_sas_fusion.c109
-rw-r--r--drivers/scsi/megaraid/megaraid_sas_fusion.h9
-rw-r--r--drivers/scsi/mpt2sas/mpi/mpi2.h7
-rw-r--r--drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h51
-rw-r--r--drivers/scsi/mpt2sas/mpi/mpi2_ioc.h4
-rw-r--r--drivers/scsi/mpt2sas/mpi/mpi2_tool.h6
-rw-r--r--drivers/scsi/mpt2sas/mpt2sas_base.c52
-rw-r--r--drivers/scsi/mpt2sas/mpt2sas_base.h16
-rw-r--r--drivers/scsi/mpt2sas/mpt2sas_config.c39
-rw-r--r--drivers/scsi/mpt2sas/mpt2sas_ctl.c3
-rw-r--r--drivers/scsi/mpt2sas/mpt2sas_ctl.h3
-rw-r--r--drivers/scsi/mpt2sas/mpt2sas_debug.h3
-rw-r--r--drivers/scsi/mpt2sas/mpt2sas_scsih.c47
-rw-r--r--drivers/scsi/mpt2sas/mpt2sas_transport.c3
-rw-r--r--drivers/scsi/mpt3sas/mpt3sas_base.c53
-rw-r--r--drivers/scsi/mpt3sas/mpt3sas_base.h12
-rw-r--r--drivers/scsi/mpt3sas/mpt3sas_config.c39
-rw-r--r--drivers/scsi/mpt3sas/mpt3sas_ctl.c3
-rw-r--r--drivers/scsi/mpt3sas/mpt3sas_ctl.h3
-rw-r--r--drivers/scsi/mpt3sas/mpt3sas_debug.h3
-rw-r--r--drivers/scsi/mpt3sas/mpt3sas_scsih.c42
-rw-r--r--drivers/scsi/mpt3sas/mpt3sas_transport.c3
-rw-r--r--drivers/scsi/mpt3sas/mpt3sas_trigger_diag.c3
-rw-r--r--drivers/scsi/mpt3sas/mpt3sas_trigger_diag.h3
-rw-r--r--drivers/scsi/nsp32.c41
-rw-r--r--drivers/scsi/pcmcia/nsp_cs.c50
-rw-r--r--drivers/scsi/qla2xxx/qla_dfs.c8
-rw-r--r--drivers/scsi/scsi.c11
-rw-r--r--drivers/scsi/scsi_debug.c128
-rw-r--r--drivers/scsi/scsi_error.c50
-rw-r--r--drivers/scsi/scsi_logging.c485
-rw-r--r--drivers/scsi/scsi_proc.c22
-rw-r--r--drivers/scsi/scsi_scan.c54
-rw-r--r--drivers/scsi/scsi_trace.c6
-rw-r--r--drivers/scsi/sd.c7
-rw-r--r--drivers/scsi/ses.c148
-rw-r--r--drivers/scsi/sg.c17
-rw-r--r--drivers/scsi/sr_ioctl.c11
-rw-r--r--drivers/scsi/storvsc_drv.c190
-rw-r--r--drivers/scsi/ufs/Kconfig13
-rw-r--r--drivers/scsi/ufs/Makefile1
-rw-r--r--drivers/scsi/ufs/ufs-qcom.c1004
-rw-r--r--drivers/scsi/ufs/ufs-qcom.h170
-rw-r--r--drivers/scsi/ufs/ufshcd.c6
-rw-r--r--drivers/scsi/wd33c93.c18
-rw-r--r--drivers/scsi/wd7000.c41
-rw-r--r--drivers/xen/xen-scsiback.c1
-rw-r--r--include/linux/enclosure.h13
-rw-r--r--include/linux/phy/phy-qcom-ufs.h59
-rw-r--r--include/scsi/scsi.h3
-rw-r--r--include/scsi/scsi_dbg.h74
-rw-r--r--include/scsi/scsi_device.h22
92 files changed, 6295 insertions, 2235 deletions
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index a9f5aed32d39..d2029a462e2c 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -2481,7 +2481,6 @@ static void ata_eh_link_report(struct ata_link *link)
for (tag = 0; tag < ATA_MAX_QUEUE; tag++) {
struct ata_queued_cmd *qc = __ata_qc_from_tag(ap, tag);
struct ata_taskfile *cmd = &qc->tf, *res = &qc->result_tf;
- const u8 *cdb = qc->cdb;
char data_buf[20] = "";
char cdb_buf[70] = "";
@@ -2509,16 +2508,15 @@ static void ata_eh_link_report(struct ata_link *link)
}
if (ata_is_atapi(qc->tf.protocol)) {
- if (qc->scsicmd)
- scsi_print_command(qc->scsicmd);
- else
- snprintf(cdb_buf, sizeof(cdb_buf),
- "cdb %02x %02x %02x %02x %02x %02x %02x %02x "
- "%02x %02x %02x %02x %02x %02x %02x %02x\n ",
- cdb[0], cdb[1], cdb[2], cdb[3],
- cdb[4], cdb[5], cdb[6], cdb[7],
- cdb[8], cdb[9], cdb[10], cdb[11],
- cdb[12], cdb[13], cdb[14], cdb[15]);
+ const u8 *cdb = qc->cdb;
+ size_t cdb_len = qc->dev->cdb_len;
+
+ if (qc->scsicmd) {
+ cdb = qc->scsicmd->cmnd;
+ cdb_len = qc->scsicmd->cmd_len;
+ }
+ __scsi_format_command(cdb_buf, sizeof(cdb_buf),
+ cdb, cdb_len);
} else {
const char *descr = ata_get_cmd_descript(cmd->command);
if (descr)
diff --git a/drivers/misc/enclosure.c b/drivers/misc/enclosure.c
index 180a5442fd4b..38552a31304a 100644
--- a/drivers/misc/enclosure.c
+++ b/drivers/misc/enclosure.c
@@ -145,8 +145,11 @@ enclosure_register(struct device *dev, const char *name, int components,
if (err)
goto err;
- for (i = 0; i < components; i++)
+ for (i = 0; i < components; i++) {
edev->component[i].number = -1;
+ edev->component[i].slot = -1;
+ edev->component[i].power_status = 1;
+ }
mutex_lock(&container_list_lock);
list_add_tail(&edev->node, &container_list);
@@ -273,27 +276,26 @@ enclosure_component_find_by_name(struct enclosure_device *edev,
static const struct attribute_group *enclosure_component_groups[];
/**
- * enclosure_component_register - add a particular component to an enclosure
+ * enclosure_component_alloc - prepare a new enclosure component
* @edev: the enclosure to add the component
* @num: the device number
* @type: the type of component being added
* @name: an optional name to appear in sysfs (leave NULL if none)
*
- * Registers the component. The name is optional for enclosures that
- * give their components a unique name. If not, leave the field NULL
- * and a name will be assigned.
+ * The name is optional for enclosures that give their components a unique
+ * name. If not, leave the field NULL and a name will be assigned.
*
* Returns a pointer to the enclosure component or an error.
*/
struct enclosure_component *
-enclosure_component_register(struct enclosure_device *edev,
- unsigned int number,
- enum enclosure_component_type type,
- const char *name)
+enclosure_component_alloc(struct enclosure_device *edev,
+ unsigned int number,
+ enum enclosure_component_type type,
+ const char *name)
{
struct enclosure_component *ecomp;
struct device *cdev;
- int err, i;
+ int i;
char newname[COMPONENT_NAME_SIZE];
if (number >= edev->components)
@@ -327,14 +329,30 @@ enclosure_component_register(struct enclosure_device *edev,
cdev->release = enclosure_component_release;
cdev->groups = enclosure_component_groups;
+ return ecomp;
+}
+EXPORT_SYMBOL_GPL(enclosure_component_alloc);
+
+/**
+ * enclosure_component_register - publishes an initialized enclosure component
+ * @ecomp: component to add
+ *
+ * Returns 0 on successful registration, releases the component otherwise
+ */
+int enclosure_component_register(struct enclosure_component *ecomp)
+{
+ struct device *cdev;
+ int err;
+
+ cdev = &ecomp->cdev;
err = device_register(cdev);
if (err) {
ecomp->number = -1;
put_device(cdev);
- return ERR_PTR(err);
+ return err;
}
- return ecomp;
+ return 0;
}
EXPORT_SYMBOL_GPL(enclosure_component_register);
@@ -417,8 +435,21 @@ static ssize_t components_show(struct device *cdev,
}
static DEVICE_ATTR_RO(components);
+static ssize_t id_show(struct device *cdev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct enclosure_device *edev = to_enclosure_device(cdev);
+
+ if (edev->cb->show_id)
+ return edev->cb->show_id(edev, buf);
+ return -EINVAL;
+}
+static DEVICE_ATTR_RO(id);
+
static struct attribute *enclosure_class_attrs[] = {
&dev_attr_components.attr,
+ &dev_attr_id.attr,
NULL,
};
ATTRIBUTE_GROUPS(enclosure_class);
@@ -553,6 +584,40 @@ static ssize_t set_component_locate(struct device *cdev,
return count;
}
+static ssize_t get_component_power_status(struct device *cdev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct enclosure_device *edev = to_enclosure_device(cdev->parent);
+ struct enclosure_component *ecomp = to_enclosure_component(cdev);
+
+ if (edev->cb->get_power_status)
+ edev->cb->get_power_status(edev, ecomp);
+ return snprintf(buf, 40, "%s\n", ecomp->power_status ? "on" : "off");
+}
+
+static ssize_t set_component_power_status(struct device *cdev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct enclosure_device *edev = to_enclosure_device(cdev->parent);
+ struct enclosure_component *ecomp = to_enclosure_component(cdev);
+ int val;
+
+ if (strncmp(buf, "on", 2) == 0 &&
+ (buf[2] == '\n' || buf[2] == '\0'))
+ val = 1;
+ else if (strncmp(buf, "off", 3) == 0 &&
+ (buf[3] == '\n' || buf[3] == '\0'))
+ val = 0;
+ else
+ return -EINVAL;
+
+ if (edev->cb->set_power_status)
+ edev->cb->set_power_status(edev, ecomp, val);
+ return count;
+}
+
static ssize_t get_component_type(struct device *cdev,
struct device_attribute *attr, char *buf)
{
@@ -561,6 +626,20 @@ static ssize_t get_component_type(struct device *cdev,
return snprintf(buf, 40, "%s\n", enclosure_type[ecomp->type]);
}
+static ssize_t get_component_slot(struct device *cdev,
+ struct device_attribute *attr, char *buf)
+{
+ struct enclosure_component *ecomp = to_enclosure_component(cdev);
+ int slot;
+
+ /* if the enclosure does not override then use 'number' as a stand-in */
+ if (ecomp->slot >= 0)
+ slot = ecomp->slot;
+ else
+ slot = ecomp->number;
+
+ return snprintf(buf, 40, "%d\n", slot);
+}
static DEVICE_ATTR(fault, S_IRUGO | S_IWUSR, get_component_fault,
set_component_fault);
@@ -570,14 +649,19 @@ static DEVICE_ATTR(active, S_IRUGO | S_IWUSR, get_component_active,
set_component_active);
static DEVICE_ATTR(locate, S_IRUGO | S_IWUSR, get_component_locate,
set_component_locate);
+static DEVICE_ATTR(power_status, S_IRUGO | S_IWUSR, get_component_power_status,
+ set_component_power_status);
static DEVICE_ATTR(type, S_IRUGO, get_component_type, NULL);
+static DEVICE_ATTR(slot, S_IRUGO, get_component_slot, NULL);
static struct attribute *enclosure_component_attrs[] = {
&dev_attr_fault.attr,
&dev_attr_status.attr,
&dev_attr_active.attr,
&dev_attr_locate.attr,
+ &dev_attr_power_status.attr,
&dev_attr_type.attr,
+ &dev_attr_slot.attr,
NULL
};
ATTRIBUTE_GROUPS(enclosure_component);
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index ccad8809ecb1..26a7623e551e 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -277,4 +277,11 @@ config PHY_STIH41X_USB
Enable this to support the USB transceiver that is part of
STMicroelectronics STiH41x SoC series.
+config PHY_QCOM_UFS
+ tristate "Qualcomm UFS PHY driver"
+ depends on OF && ARCH_MSM
+ select GENERIC_PHY
+ help
+ Support for UFS PHY on QCOM chipsets.
+
endmenu
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index aa74f961e44e..cfbb72064516 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -34,3 +34,6 @@ obj-$(CONFIG_PHY_ST_SPEAR1340_MIPHY) += phy-spear1340-miphy.o
obj-$(CONFIG_PHY_XGENE) += phy-xgene.o
obj-$(CONFIG_PHY_STIH407_USB) += phy-stih407-usb.o
obj-$(CONFIG_PHY_STIH41X_USB) += phy-stih41x-usb.o
+obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs.o
+obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs-qmp-20nm.o
+obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs-qmp-14nm.o
diff --git a/drivers/phy/phy-qcom-ufs-i.h b/drivers/phy/phy-qcom-ufs-i.h
new file mode 100644
index 000000000000..591a39175e8a
--- /dev/null
+++ b/drivers/phy/phy-qcom-ufs-i.h
@@ -0,0 +1,159 @@
+/*
+ * Copyright (c) 2013-2015, Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef UFS_QCOM_PHY_I_H_
+#define UFS_QCOM_PHY_I_H_
+
+#include <linux/module.h>
+#include <linux/clk.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+#include <linux/phy/phy-qcom-ufs.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+
+#define readl_poll_timeout(addr, val, cond, sleep_us, timeout_us) \
+({ \
+ ktime_t timeout = ktime_add_us(ktime_get(), timeout_us); \
+ might_sleep_if(timeout_us); \
+ for (;;) { \
+ (val) = readl(addr); \
+ if (cond) \
+ break; \
+ if (timeout_us && ktime_compare(ktime_get(), timeout) > 0) { \
+ (val) = readl(addr); \
+ break; \
+ } \
+ if (sleep_us) \
+ usleep_range(DIV_ROUND_UP(sleep_us, 4), sleep_us); \
+ } \
+ (cond) ? 0 : -ETIMEDOUT; \
+})
+
+#define UFS_QCOM_PHY_CAL_ENTRY(reg, val) \
+ { \
+ .reg_offset = reg, \
+ .cfg_value = val, \
+ }
+
+#define UFS_QCOM_PHY_NAME_LEN 30
+
+enum {
+ MASK_SERDES_START = 0x1,
+ MASK_PCS_READY = 0x1,
+};
+
+enum {
+ OFFSET_SERDES_START = 0x0,
+};
+
+struct ufs_qcom_phy_stored_attributes {
+ u32 att;
+ u32 value;
+};
+
+
+struct ufs_qcom_phy_calibration {
+ u32 reg_offset;
+ u32 cfg_value;
+};
+
+struct ufs_qcom_phy_vreg {
+ const char *name;
+ struct regulator *reg;
+ int max_uA;
+ int min_uV;
+ int max_uV;
+ bool enabled;
+ bool is_always_on;
+};
+
+struct ufs_qcom_phy {
+ struct list_head list;
+ struct device *dev;
+ void __iomem *mmio;
+ void __iomem *dev_ref_clk_ctrl_mmio;
+ struct clk *tx_iface_clk;
+ struct clk *rx_iface_clk;
+ bool is_iface_clk_enabled;
+ struct clk *ref_clk_src;
+ struct clk *ref_clk_parent;
+ struct clk *ref_clk;
+ bool is_ref_clk_enabled;
+ bool is_dev_ref_clk_enabled;
+ struct ufs_qcom_phy_vreg vdda_pll;
+ struct ufs_qcom_phy_vreg vdda_phy;
+ struct ufs_qcom_phy_vreg vddp_ref_clk;
+ unsigned int quirks;
+
+ /*
+ * If UFS link is put into Hibern8 and if UFS PHY analog hardware is
+ * power collapsed (by clearing UFS_PHY_POWER_DOWN_CONTROL), Hibern8
+ * exit might fail even after powering on UFS PHY analog hardware.
+ * Enabling this quirk will help to solve above issue by doing
+ * custom PHY settings just before PHY analog power collapse.
+ */
+ #define UFS_QCOM_PHY_QUIRK_HIBERN8_EXIT_AFTER_PHY_PWR_COLLAPSE BIT(0)
+
+ u8 host_ctrl_rev_major;
+ u16 host_ctrl_rev_minor;
+ u16 host_ctrl_rev_step;
+
+ char name[UFS_QCOM_PHY_NAME_LEN];
+ struct ufs_qcom_phy_calibration *cached_regs;
+ int cached_regs_table_size;
+ bool is_powered_on;
+ struct ufs_qcom_phy_specific_ops *phy_spec_ops;
+};
+
+/**
+ * struct ufs_qcom_phy_specific_ops - set of pointers to functions which have a
+ * specific implementation per phy. Each UFS phy, should implement
+ * those functions according to its spec and requirements
+ * @calibrate_phy: pointer to a function that calibrate the phy
+ * @start_serdes: pointer to a function that starts the serdes
+ * @is_physical_coding_sublayer_ready: pointer to a function that
+ * checks pcs readiness. returns 0 for success and non-zero for error.
+ * @set_tx_lane_enable: pointer to a function that enable tx lanes
+ * @power_control: pointer to a function that controls analog rail of phy
+ * and writes to QSERDES_RX_SIGDET_CNTRL attribute
+ */
+struct ufs_qcom_phy_specific_ops {
+ int (*calibrate_phy)(struct ufs_qcom_phy *phy, bool is_rate_B);
+ void (*start_serdes)(struct ufs_qcom_phy *phy);
+ int (*is_physical_coding_sublayer_ready)(struct ufs_qcom_phy *phy);
+ void (*set_tx_lane_enable)(struct ufs_qcom_phy *phy, u32 val);
+ void (*power_control)(struct ufs_qcom_phy *phy, bool val);
+};
+
+struct ufs_qcom_phy *get_ufs_qcom_phy(struct phy *generic_phy);
+int ufs_qcom_phy_power_on(struct phy *generic_phy);
+int ufs_qcom_phy_power_off(struct phy *generic_phy);
+int ufs_qcom_phy_exit(struct phy *generic_phy);
+int ufs_qcom_phy_init_clks(struct phy *generic_phy,
+ struct ufs_qcom_phy *phy_common);
+int ufs_qcom_phy_init_vregulators(struct phy *generic_phy,
+ struct ufs_qcom_phy *phy_common);
+int ufs_qcom_phy_remove(struct phy *generic_phy,
+ struct ufs_qcom_phy *ufs_qcom_phy);
+struct phy *ufs_qcom_phy_generic_probe(struct platform_device *pdev,
+ struct ufs_qcom_phy *common_cfg,
+ struct phy_ops *ufs_qcom_phy_gen_ops,
+ struct ufs_qcom_phy_specific_ops *phy_spec_ops);
+int ufs_qcom_phy_calibrate(struct ufs_qcom_phy *ufs_qcom_phy,
+ struct ufs_qcom_phy_calibration *tbl_A, int tbl_size_A,
+ struct ufs_qcom_phy_calibration *tbl_B, int tbl_size_B,
+ bool is_rate_B);
+#endif
diff --git a/drivers/phy/phy-qcom-ufs-qmp-14nm.c b/drivers/phy/phy-qcom-ufs-qmp-14nm.c
new file mode 100644
index 000000000000..f5fc50a9fce7
--- /dev/null
+++ b/drivers/phy/phy-qcom-ufs-qmp-14nm.c
@@ -0,0 +1,201 @@
+/*
+ * Copyright (c) 2013-2015, Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include "phy-qcom-ufs-qmp-14nm.h"
+
+#define UFS_PHY_NAME "ufs_phy_qmp_14nm"
+#define UFS_PHY_VDDA_PHY_UV (925000)
+
+static
+int ufs_qcom_phy_qmp_14nm_phy_calibrate(struct ufs_qcom_phy *ufs_qcom_phy,
+ bool is_rate_B)
+{
+ int tbl_size_A = ARRAY_SIZE(phy_cal_table_rate_A);
+ int tbl_size_B = ARRAY_SIZE(phy_cal_table_rate_B);
+ int err;
+
+ err = ufs_qcom_phy_calibrate(ufs_qcom_phy, phy_cal_table_rate_A,
+ tbl_size_A, phy_cal_table_rate_B, tbl_size_B, is_rate_B);
+
+ if (err)
+ dev_err(ufs_qcom_phy->dev,
+ "%s: ufs_qcom_phy_calibrate() failed %d\n",
+ __func__, err);
+ return err;
+}
+
+static
+void ufs_qcom_phy_qmp_14nm_advertise_quirks(struct ufs_qcom_phy *phy_common)
+{
+ phy_common->quirks =
+ UFS_QCOM_PHY_QUIRK_HIBERN8_EXIT_AFTER_PHY_PWR_COLLAPSE;
+}
+
+static int ufs_qcom_phy_qmp_14nm_init(struct phy *generic_phy)
+{
+ struct ufs_qcom_phy_qmp_14nm *phy = phy_get_drvdata(generic_phy);
+ struct ufs_qcom_phy *phy_common = &phy->common_cfg;
+ int err;
+
+ err = ufs_qcom_phy_init_clks(generic_phy, phy_common);
+ if (err) {
+ dev_err(phy_common->dev, "%s: ufs_qcom_phy_init_clks() failed %d\n",
+ __func__, err);
+ goto out;
+ }
+
+ err = ufs_qcom_phy_init_vregulators(generic_phy, phy_common);
+ if (err) {
+ dev_err(phy_common->dev, "%s: ufs_qcom_phy_init_vregulators() failed %d\n",
+ __func__, err);
+ goto out;
+ }
+ phy_common->vdda_phy.max_uV = UFS_PHY_VDDA_PHY_UV;
+ phy_common->vdda_phy.min_uV = UFS_PHY_VDDA_PHY_UV;
+
+ ufs_qcom_phy_qmp_14nm_advertise_quirks(phy_common);
+
+out:
+ return err;
+}
+
+static
+void ufs_qcom_phy_qmp_14nm_power_control(struct ufs_qcom_phy *phy, bool val)
+{
+ writel_relaxed(val ? 0x1 : 0x0, phy->mmio + UFS_PHY_POWER_DOWN_CONTROL);
+ /*
+ * Before any transactions involving PHY, ensure PHY knows
+ * that it's analog rail is powered ON (or OFF).
+ */
+ mb();
+}
+
+static inline
+void ufs_qcom_phy_qmp_14nm_set_tx_lane_enable(struct ufs_qcom_phy *phy, u32 val)
+{
+ /*
+ * 14nm PHY does not have TX_LANE_ENABLE register.
+ * Implement this function so as not to propagate error to caller.
+ */
+}
+
+static inline void ufs_qcom_phy_qmp_14nm_start_serdes(struct ufs_qcom_phy *phy)
+{
+ u32 tmp;
+
+ tmp = readl_relaxed(phy->mmio + UFS_PHY_PHY_START);
+ tmp &= ~MASK_SERDES_START;
+ tmp |= (1 << OFFSET_SERDES_START);
+ writel_relaxed(tmp, phy->mmio + UFS_PHY_PHY_START);
+ /* Ensure register value is committed */
+ mb();
+}
+
+static int ufs_qcom_phy_qmp_14nm_is_pcs_ready(struct ufs_qcom_phy *phy_common)
+{
+ int err = 0;
+ u32 val;
+
+ err = readl_poll_timeout(phy_common->mmio + UFS_PHY_PCS_READY_STATUS,
+ val, (val & MASK_PCS_READY), 10, 1000000);
+ if (err)
+ dev_err(phy_common->dev, "%s: poll for pcs failed err = %d\n",
+ __func__, err);
+ return err;
+}
+
+static struct phy_ops ufs_qcom_phy_qmp_14nm_phy_ops = {
+ .init = ufs_qcom_phy_qmp_14nm_init,
+ .exit = ufs_qcom_phy_exit,
+ .power_on = ufs_qcom_phy_power_on,
+ .power_off = ufs_qcom_phy_power_off,
+ .owner = THIS_MODULE,
+};
+
+static struct ufs_qcom_phy_specific_ops phy_14nm_ops = {
+ .calibrate_phy = ufs_qcom_phy_qmp_14nm_phy_calibrate,
+ .start_serdes = ufs_qcom_phy_qmp_14nm_start_serdes,
+ .is_physical_coding_sublayer_ready = ufs_qcom_phy_qmp_14nm_is_pcs_ready,
+ .set_tx_lane_enable = ufs_qcom_phy_qmp_14nm_set_tx_lane_enable,
+ .power_control = ufs_qcom_phy_qmp_14nm_power_control,
+};
+
+static int ufs_qcom_phy_qmp_14nm_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct phy *generic_phy;
+ struct ufs_qcom_phy_qmp_14nm *phy;
+ int err = 0;
+
+ phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
+ if (!phy) {
+ dev_err(dev, "%s: failed to allocate phy\n", __func__);
+ err = -ENOMEM;
+ goto out;
+ }
+
+ generic_phy = ufs_qcom_phy_generic_probe(pdev, &phy->common_cfg,
+ &ufs_qcom_phy_qmp_14nm_phy_ops, &phy_14nm_ops);
+
+ if (!generic_phy) {
+ dev_err(dev, "%s: ufs_qcom_phy_generic_probe() failed\n",
+ __func__);
+ err = -EIO;
+ goto out;
+ }
+
+ phy_set_drvdata(generic_phy, phy);
+
+ strlcpy(phy->common_cfg.name, UFS_PHY_NAME,
+ sizeof(phy->common_cfg.name));
+
+out:
+ return err;
+}
+
+static int ufs_qcom_phy_qmp_14nm_remove(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct phy *generic_phy = to_phy(dev);
+ struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(generic_phy);
+ int err = 0;
+
+ err = ufs_qcom_phy_remove(generic_phy, ufs_qcom_phy);
+ if (err)
+ dev_err(dev, "%s: ufs_qcom_phy_remove failed = %d\n",
+ __func__, err);
+
+ return err;
+}
+
+static const struct of_device_id ufs_qcom_phy_qmp_14nm_of_match[] = {
+ {.compatible = "qcom,ufs-phy-qmp-14nm"},
+ {},
+};
+MODULE_DEVICE_TABLE(of, ufs_qcom_phy_qmp_14nm_of_match);
+
+static struct platform_driver ufs_qcom_phy_qmp_14nm_driver = {
+ .probe = ufs_qcom_phy_qmp_14nm_probe,
+ .remove = ufs_qcom_phy_qmp_14nm_remove,
+ .driver = {
+ .of_match_table = ufs_qcom_phy_qmp_14nm_of_match,
+ .name = "ufs_qcom_phy_qmp_14nm",
+ .owner = THIS_MODULE,
+ },
+};
+
+module_platform_driver(ufs_qcom_phy_qmp_14nm_driver);
+
+MODULE_DESCRIPTION("Universal Flash Storage (UFS) QCOM PHY QMP 14nm");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/phy-qcom-ufs-qmp-14nm.h b/drivers/phy/phy-qcom-ufs-qmp-14nm.h
new file mode 100644
index 000000000000..3aefdbacbcd0
--- /dev/null
+++ b/drivers/phy/phy-qcom-ufs-qmp-14nm.h
@@ -0,0 +1,177 @@
+/*
+ * Copyright (c) 2013-2015, Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef UFS_QCOM_PHY_QMP_14NM_H_
+#define UFS_QCOM_PHY_QMP_14NM_H_
+
+#include "phy-qcom-ufs-i.h"
+
+/* QCOM UFS PHY control registers */
+#define COM_OFF(x) (0x000 + x)
+#define PHY_OFF(x) (0xC00 + x)
+#define TX_OFF(n, x) (0x400 + (0x400 * n) + x)
+#define RX_OFF(n, x) (0x600 + (0x400 * n) + x)
+
+/* UFS PHY QSERDES COM registers */
+#define QSERDES_COM_BG_TIMER COM_OFF(0x0C)
+#define QSERDES_COM_BIAS_EN_CLKBUFLR_EN COM_OFF(0x34)
+#define QSERDES_COM_SYS_CLK_CTRL COM_OFF(0x3C)
+#define QSERDES_COM_LOCK_CMP1_MODE0 COM_OFF(0x4C)
+#define QSERDES_COM_LOCK_CMP2_MODE0 COM_OFF(0x50)
+#define QSERDES_COM_LOCK_CMP3_MODE0 COM_OFF(0x54)
+#define QSERDES_COM_LOCK_CMP1_MODE1 COM_OFF(0x58)
+#define QSERDES_COM_LOCK_CMP2_MODE1 COM_OFF(0x5C)
+#define QSERDES_COM_LOCK_CMP3_MODE1 COM_OFF(0x60)
+#define QSERDES_COM_CP_CTRL_MODE0 COM_OFF(0x78)
+#define QSERDES_COM_CP_CTRL_MODE1 COM_OFF(0x7C)
+#define QSERDES_COM_PLL_RCTRL_MODE0 COM_OFF(0x84)
+#define QSERDES_COM_PLL_RCTRL_MODE1 COM_OFF(0x88)
+#define QSERDES_COM_PLL_CCTRL_MODE0 COM_OFF(0x90)
+#define QSERDES_COM_PLL_CCTRL_MODE1 COM_OFF(0x94)
+#define QSERDES_COM_SYSCLK_EN_SEL COM_OFF(0xAC)
+#define QSERDES_COM_RESETSM_CNTRL COM_OFF(0xB4)
+#define QSERDES_COM_LOCK_CMP_EN COM_OFF(0xC8)
+#define QSERDES_COM_LOCK_CMP_CFG COM_OFF(0xCC)
+#define QSERDES_COM_DEC_START_MODE0 COM_OFF(0xD0)
+#define QSERDES_COM_DEC_START_MODE1 COM_OFF(0xD4)
+#define QSERDES_COM_DIV_FRAC_START1_MODE0 COM_OFF(0xDC)
+#define QSERDES_COM_DIV_FRAC_START2_MODE0 COM_OFF(0xE0)
+#define QSERDES_COM_DIV_FRAC_START3_MODE0 COM_OFF(0xE4)
+#define QSERDES_COM_DIV_FRAC_START1_MODE1 COM_OFF(0xE8)
+#define QSERDES_COM_DIV_FRAC_START2_MODE1 COM_OFF(0xEC)
+#define QSERDES_COM_DIV_FRAC_START3_MODE1 COM_OFF(0xF0)
+#define QSERDES_COM_INTEGLOOP_GAIN0_MODE0 COM_OFF(0x108)
+#define QSERDES_COM_INTEGLOOP_GAIN1_MODE0 COM_OFF(0x10C)
+#define QSERDES_COM_INTEGLOOP_GAIN0_MODE1 COM_OFF(0x110)
+#define QSERDES_COM_INTEGLOOP_GAIN1_MODE1 COM_OFF(0x114)
+#define QSERDES_COM_VCO_TUNE_CTRL COM_OFF(0x124)
+#define QSERDES_COM_VCO_TUNE_MAP COM_OFF(0x128)
+#define QSERDES_COM_VCO_TUNE1_MODE0 COM_OFF(0x12C)
+#define QSERDES_COM_VCO_TUNE2_MODE0 COM_OFF(0x130)
+#define QSERDES_COM_VCO_TUNE1_MODE1 COM_OFF(0x134)
+#define QSERDES_COM_VCO_TUNE2_MODE1 COM_OFF(0x138)
+#define QSERDES_COM_VCO_TUNE_TIMER1 COM_OFF(0x144)
+#define QSERDES_COM_VCO_TUNE_TIMER2 COM_OFF(0x148)
+#define QSERDES_COM_CLK_SELECT COM_OFF(0x174)
+#define QSERDES_COM_HSCLK_SEL COM_OFF(0x178)
+#define QSERDES_COM_CORECLK_DIV COM_OFF(0x184)
+#define QSERDES_COM_CORE_CLK_EN COM_OFF(0x18C)
+#define QSERDES_COM_CMN_CONFIG COM_OFF(0x194)
+#define QSERDES_COM_SVS_MODE_CLK_SEL COM_OFF(0x19C)
+#define QSERDES_COM_CORECLK_DIV_MODE1 COM_OFF(0x1BC)
+
+/* UFS PHY registers */
+#define UFS_PHY_PHY_START PHY_OFF(0x00)
+#define UFS_PHY_POWER_DOWN_CONTROL PHY_OFF(0x04)
+#define UFS_PHY_PCS_READY_STATUS PHY_OFF(0x168)
+
+/* UFS PHY TX registers */
+#define QSERDES_TX_HIGHZ_TRANSCEIVER_BIAS_DRVR_EN TX_OFF(0, 0x68)
+#define QSERDES_TX_LANE_MODE TX_OFF(0, 0x94)
+
+/* UFS PHY RX registers */
+#define QSERDES_RX_UCDR_FASTLOCK_FO_GAIN RX_OFF(0, 0x40)
+#define QSERDES_RX_RX_TERM_BW RX_OFF(0, 0x90)
+#define QSERDES_RX_RX_EQ_GAIN1_LSB RX_OFF(0, 0xC4)
+#define QSERDES_RX_RX_EQ_GAIN1_MSB RX_OFF(0, 0xC8)
+#define QSERDES_RX_RX_EQ_GAIN2_LSB RX_OFF(0, 0xCC)
+#define QSERDES_RX_RX_EQ_GAIN2_MSB RX_OFF(0, 0xD0)
+#define QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2 RX_OFF(0, 0xD8)
+#define QSERDES_RX_SIGDET_CNTRL RX_OFF(0, 0x114)
+#define QSERDES_RX_SIGDET_LVL RX_OFF(0, 0x118)
+#define QSERDES_RX_SIGDET_DEGLITCH_CNTRL RX_OFF(0, 0x11C)
+#define QSERDES_RX_RX_INTERFACE_MODE RX_OFF(0, 0x12C)
+
+/*
+ * This structure represents the 14nm specific phy.
+ * common_cfg MUST remain the first field in this structure
+ * in case extra fields are added. This way, when calling
+ * get_ufs_qcom_phy() of generic phy, we can extract the
+ * common phy structure (struct ufs_qcom_phy) out of it
+ * regardless of the relevant specific phy.
+ */
+struct ufs_qcom_phy_qmp_14nm {
+ struct ufs_qcom_phy common_cfg;
+};
+
+static struct ufs_qcom_phy_calibration phy_cal_table_rate_A[] = {
+ UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_POWER_DOWN_CONTROL, 0x01),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CMN_CONFIG, 0x0e),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_SYSCLK_EN_SEL, 0xd7),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CLK_SELECT, 0x30),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_SYS_CLK_CTRL, 0x06),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x08),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_BG_TIMER, 0x0a),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_HSCLK_SEL, 0x05),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CORECLK_DIV, 0x0a),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CORECLK_DIV_MODE1, 0x0a),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP_EN, 0x01),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE_CTRL, 0x10),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_RESETSM_CNTRL, 0x20),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CORE_CLK_EN, 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP_CFG, 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE_TIMER1, 0xff),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE_TIMER2, 0x3f),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE_MAP, 0x14),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_SVS_MODE_CLK_SEL, 0x05),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DEC_START_MODE0, 0x82),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START1_MODE0, 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START2_MODE0, 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CP_CTRL_MODE0, 0x0b),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_RCTRL_MODE0, 0x16),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CCTRL_MODE0, 0x28),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE1_MODE0, 0x28),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE2_MODE0, 0x02),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP1_MODE0, 0xff),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP2_MODE0, 0x0c),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP3_MODE0, 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DEC_START_MODE1, 0x98),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START1_MODE1, 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START2_MODE1, 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START3_MODE1, 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CP_CTRL_MODE1, 0x0b),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_RCTRL_MODE1, 0x16),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CCTRL_MODE1, 0x28),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_INTEGLOOP_GAIN0_MODE1, 0x80),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_INTEGLOOP_GAIN1_MODE1, 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE1_MODE1, 0xd6),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE2_MODE1, 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP1_MODE1, 0x32),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP2_MODE1, 0x0f),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP3_MODE1, 0x00),
+
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_HIGHZ_TRANSCEIVER_BIAS_DRVR_EN, 0x45),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_LANE_MODE, 0x02),
+
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_SIGDET_LVL, 0x24),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_SIGDET_CNTRL, 0x02),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_INTERFACE_MODE, 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_SIGDET_DEGLITCH_CNTRL, 0x18),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_UCDR_FASTLOCK_FO_GAIN, 0x0B),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_TERM_BW, 0x5B),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_LSB, 0xFF),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_MSB, 0x3F),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_LSB, 0xFF),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_MSB, 0x0F),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0E),
+};
+
+static struct ufs_qcom_phy_calibration phy_cal_table_rate_B[] = {
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE_MAP, 0x54),
+};
+
+#endif
diff --git a/drivers/phy/phy-qcom-ufs-qmp-20nm.c b/drivers/phy/phy-qcom-ufs-qmp-20nm.c
new file mode 100644
index 000000000000..8332f96b2c4a
--- /dev/null
+++ b/drivers/phy/phy-qcom-ufs-qmp-20nm.c
@@ -0,0 +1,257 @@
+/*
+ * Copyright (c) 2013-2015, Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include "phy-qcom-ufs-qmp-20nm.h"
+
+#define UFS_PHY_NAME "ufs_phy_qmp_20nm"
+
+static
+int ufs_qcom_phy_qmp_20nm_phy_calibrate(struct ufs_qcom_phy *ufs_qcom_phy,
+ bool is_rate_B)
+{
+ struct ufs_qcom_phy_calibration *tbl_A, *tbl_B;
+ int tbl_size_A, tbl_size_B;
+ u8 major = ufs_qcom_phy->host_ctrl_rev_major;
+ u16 minor = ufs_qcom_phy->host_ctrl_rev_minor;
+ u16 step = ufs_qcom_phy->host_ctrl_rev_step;
+ int err;
+
+ if ((major == 0x1) && (minor == 0x002) && (step == 0x0000)) {
+ tbl_size_A = ARRAY_SIZE(phy_cal_table_rate_A_1_2_0);
+ tbl_A = phy_cal_table_rate_A_1_2_0;
+ } else if ((major == 0x1) && (minor == 0x003) && (step == 0x0000)) {
+ tbl_size_A = ARRAY_SIZE(phy_cal_table_rate_A_1_3_0);
+ tbl_A = phy_cal_table_rate_A_1_3_0;
+ } else {
+ dev_err(ufs_qcom_phy->dev, "%s: Unknown UFS-PHY version, no calibration values\n",
+ __func__);
+ err = -ENODEV;
+ goto out;
+ }
+
+ tbl_size_B = ARRAY_SIZE(phy_cal_table_rate_B);
+ tbl_B = phy_cal_table_rate_B;
+
+ err = ufs_qcom_phy_calibrate(ufs_qcom_phy, tbl_A, tbl_size_A,
+ tbl_B, tbl_size_B, is_rate_B);
+
+ if (err)
+ dev_err(ufs_qcom_phy->dev, "%s: ufs_qcom_phy_calibrate() failed %d\n",
+ __func__, err);
+
+out:
+ return err;
+}
+
+static
+void ufs_qcom_phy_qmp_20nm_advertise_quirks(struct ufs_qcom_phy *phy_common)
+{
+ phy_common->quirks =
+ UFS_QCOM_PHY_QUIRK_HIBERN8_EXIT_AFTER_PHY_PWR_COLLAPSE;
+}
+
+static int ufs_qcom_phy_qmp_20nm_init(struct phy *generic_phy)
+{
+ struct ufs_qcom_phy_qmp_20nm *phy = phy_get_drvdata(generic_phy);
+ struct ufs_qcom_phy *phy_common = &phy->common_cfg;
+ int err = 0;
+
+ err = ufs_qcom_phy_init_clks(generic_phy, phy_common);
+ if (err) {
+ dev_err(phy_common->dev, "%s: ufs_qcom_phy_init_clks() failed %d\n",
+ __func__, err);
+ goto out;
+ }
+
+ err = ufs_qcom_phy_init_vregulators(generic_phy, phy_common);
+ if (err) {
+ dev_err(phy_common->dev, "%s: ufs_qcom_phy_init_vregulators() failed %d\n",
+ __func__, err);
+ goto out;
+ }
+
+ ufs_qcom_phy_qmp_20nm_advertise_quirks(phy_common);
+
+out:
+ return err;
+}
+
+static
+void ufs_qcom_phy_qmp_20nm_power_control(struct ufs_qcom_phy *phy, bool val)
+{
+ bool hibern8_exit_after_pwr_collapse = phy->quirks &
+ UFS_QCOM_PHY_QUIRK_HIBERN8_EXIT_AFTER_PHY_PWR_COLLAPSE;
+
+ if (val) {
+ writel_relaxed(0x1, phy->mmio + UFS_PHY_POWER_DOWN_CONTROL);
+ /*
+ * Before any transactions involving PHY, ensure PHY knows
+ * that it's analog rail is powered ON.
+ */
+ mb();
+
+ if (hibern8_exit_after_pwr_collapse) {
+ /*
+ * Give atleast 1us delay after restoring PHY analog
+ * power.
+ */
+ usleep_range(1, 2);
+ writel_relaxed(0x0A, phy->mmio +
+ QSERDES_COM_SYSCLK_EN_SEL_TXBAND);
+ writel_relaxed(0x08, phy->mmio +
+ QSERDES_COM_SYSCLK_EN_SEL_TXBAND);
+ /*
+ * Make sure workaround is deactivated before proceeding
+ * with normal PHY operations.
+ */
+ mb();
+ }
+ } else {
+ if (hibern8_exit_after_pwr_collapse) {
+ writel_relaxed(0x0A, phy->mmio +
+ QSERDES_COM_SYSCLK_EN_SEL_TXBAND);
+ writel_relaxed(0x02, phy->mmio +
+ QSERDES_COM_SYSCLK_EN_SEL_TXBAND);
+ /*
+ * Make sure that above workaround is activated before
+ * PHY analog power collapse.
+ */
+ mb();
+ }
+
+ writel_relaxed(0x0, phy->mmio + UFS_PHY_POWER_DOWN_CONTROL);
+ /*
+ * ensure that PHY knows its PHY analog rail is going
+ * to be powered down
+ */
+ mb();
+ }
+}
+
+static
+void ufs_qcom_phy_qmp_20nm_set_tx_lane_enable(struct ufs_qcom_phy *phy, u32 val)
+{
+ writel_relaxed(val & UFS_PHY_TX_LANE_ENABLE_MASK,
+ phy->mmio + UFS_PHY_TX_LANE_ENABLE);
+ mb();
+}
+
+static inline void ufs_qcom_phy_qmp_20nm_start_serdes(struct ufs_qcom_phy *phy)
+{
+ u32 tmp;
+
+ tmp = readl_relaxed(phy->mmio + UFS_PHY_PHY_START);
+ tmp &= ~MASK_SERDES_START;
+ tmp |= (1 << OFFSET_SERDES_START);
+ writel_relaxed(tmp, phy->mmio + UFS_PHY_PHY_START);
+ mb();
+}
+
+static int ufs_qcom_phy_qmp_20nm_is_pcs_ready(struct ufs_qcom_phy *phy_common)
+{
+ int err = 0;
+ u32 val;
+
+ err = readl_poll_timeout(phy_common->mmio + UFS_PHY_PCS_READY_STATUS,
+ val, (val & MASK_PCS_READY), 10, 1000000);
+ if (err)
+ dev_err(phy_common->dev, "%s: poll for pcs failed err = %d\n",
+ __func__, err);
+ return err;
+}
+
+static struct phy_ops ufs_qcom_phy_qmp_20nm_phy_ops = {
+ .init = ufs_qcom_phy_qmp_20nm_init,
+ .exit = ufs_qcom_phy_exit,
+ .power_on = ufs_qcom_phy_power_on,
+ .power_off = ufs_qcom_phy_power_off,
+ .owner = THIS_MODULE,
+};
+
+static struct ufs_qcom_phy_specific_ops phy_20nm_ops = {
+ .calibrate_phy = ufs_qcom_phy_qmp_20nm_phy_calibrate,
+ .start_serdes = ufs_qcom_phy_qmp_20nm_start_serdes,
+ .is_physical_coding_sublayer_ready = ufs_qcom_phy_qmp_20nm_is_pcs_ready,
+ .set_tx_lane_enable = ufs_qcom_phy_qmp_20nm_set_tx_lane_enable,
+ .power_control = ufs_qcom_phy_qmp_20nm_power_control,
+};
+
+static int ufs_qcom_phy_qmp_20nm_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct phy *generic_phy;
+ struct ufs_qcom_phy_qmp_20nm *phy;
+ int err = 0;
+
+ phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
+ if (!phy) {
+ dev_err(dev, "%s: failed to allocate phy\n", __func__);
+ err = -ENOMEM;
+ goto out;
+ }
+
+ generic_phy = ufs_qcom_phy_generic_probe(pdev, &phy->common_cfg,
+ &ufs_qcom_phy_qmp_20nm_phy_ops, &phy_20nm_ops);
+
+ if (!generic_phy) {
+ dev_err(dev, "%s: ufs_qcom_phy_generic_probe() failed\n",
+ __func__);
+ err = -EIO;
+ goto out;
+ }
+
+ phy_set_drvdata(generic_phy, phy);
+
+ strlcpy(phy->common_cfg.name, UFS_PHY_NAME,
+ sizeof(phy->common_cfg.name));
+
+out:
+ return err;
+}
+
+static int ufs_qcom_phy_qmp_20nm_remove(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct phy *generic_phy = to_phy(dev);
+ struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(generic_phy);
+ int err = 0;
+
+ err = ufs_qcom_phy_remove(generic_phy, ufs_qcom_phy);
+ if (err)
+ dev_err(dev, "%s: ufs_qcom_phy_remove failed = %d\n",
+ __func__, err);
+
+ return err;
+}
+
+static const struct of_device_id ufs_qcom_phy_qmp_20nm_of_match[] = {
+ {.compatible = "qcom,ufs-phy-qmp-20nm"},
+ {},
+};
+MODULE_DEVICE_TABLE(of, ufs_qcom_phy_qmp_20nm_of_match);
+
+static struct platform_driver ufs_qcom_phy_qmp_20nm_driver = {
+ .probe = ufs_qcom_phy_qmp_20nm_probe,
+ .remove = ufs_qcom_phy_qmp_20nm_remove,
+ .driver = {
+ .of_match_table = ufs_qcom_phy_qmp_20nm_of_match,
+ .name = "ufs_qcom_phy_qmp_20nm",
+ .owner = THIS_MODULE,
+ },
+};
+
+module_platform_driver(ufs_qcom_phy_qmp_20nm_driver);
+
+MODULE_DESCRIPTION("Universal Flash Storage (UFS) QCOM PHY QMP 20nm");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/phy-qcom-ufs-qmp-20nm.h b/drivers/phy/phy-qcom-ufs-qmp-20nm.h
new file mode 100644
index 000000000000..4f3076bb3d71
--- /dev/null
+++ b/drivers/phy/phy-qcom-ufs-qmp-20nm.h
@@ -0,0 +1,235 @@
+/*
+ * Copyright (c) 2013-2015, Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef UFS_QCOM_PHY_QMP_20NM_H_
+#define UFS_QCOM_PHY_QMP_20NM_H_
+
+#include "phy-qcom-ufs-i.h"
+
+/* QCOM UFS PHY control registers */
+
+#define COM_OFF(x) (0x000 + x)
+#define PHY_OFF(x) (0xC00 + x)
+#define TX_OFF(n, x) (0x400 + (0x400 * n) + x)
+#define RX_OFF(n, x) (0x600 + (0x400 * n) + x)
+
+/* UFS PHY PLL block registers */
+#define QSERDES_COM_SYS_CLK_CTRL COM_OFF(0x0)
+#define QSERDES_COM_PLL_VCOTAIL_EN COM_OFF(0x04)
+#define QSERDES_COM_PLL_CNTRL COM_OFF(0x14)
+#define QSERDES_COM_PLL_IP_SETI COM_OFF(0x24)
+#define QSERDES_COM_CORE_CLK_IN_SYNC_SEL COM_OFF(0x28)
+#define QSERDES_COM_BIAS_EN_CLKBUFLR_EN COM_OFF(0x30)
+#define QSERDES_COM_PLL_CP_SETI COM_OFF(0x34)
+#define QSERDES_COM_PLL_IP_SETP COM_OFF(0x38)
+#define QSERDES_COM_PLL_CP_SETP COM_OFF(0x3C)
+#define QSERDES_COM_SYSCLK_EN_SEL_TXBAND COM_OFF(0x48)
+#define QSERDES_COM_RESETSM_CNTRL COM_OFF(0x4C)
+#define QSERDES_COM_RESETSM_CNTRL2 COM_OFF(0x50)
+#define QSERDES_COM_PLLLOCK_CMP1 COM_OFF(0x90)
+#define QSERDES_COM_PLLLOCK_CMP2 COM_OFF(0x94)
+#define QSERDES_COM_PLLLOCK_CMP3 COM_OFF(0x98)
+#define QSERDES_COM_PLLLOCK_CMP_EN COM_OFF(0x9C)
+#define QSERDES_COM_BGTC COM_OFF(0xA0)
+#define QSERDES_COM_DEC_START1 COM_OFF(0xAC)
+#define QSERDES_COM_PLL_AMP_OS COM_OFF(0xB0)
+#define QSERDES_COM_RES_CODE_UP_OFFSET COM_OFF(0xD8)
+#define QSERDES_COM_RES_CODE_DN_OFFSET COM_OFF(0xDC)
+#define QSERDES_COM_DIV_FRAC_START1 COM_OFF(0x100)
+#define QSERDES_COM_DIV_FRAC_START2 COM_OFF(0x104)
+#define QSERDES_COM_DIV_FRAC_START3 COM_OFF(0x108)
+#define QSERDES_COM_DEC_START2 COM_OFF(0x10C)
+#define QSERDES_COM_PLL_RXTXEPCLK_EN COM_OFF(0x110)
+#define QSERDES_COM_PLL_CRCTRL COM_OFF(0x114)
+#define QSERDES_COM_PLL_CLKEPDIV COM_OFF(0x118)
+
+/* TX LANE n (0, 1) registers */
+#define QSERDES_TX_EMP_POST1_LVL(n) TX_OFF(n, 0x08)
+#define QSERDES_TX_DRV_LVL(n) TX_OFF(n, 0x0C)
+#define QSERDES_TX_LANE_MODE(n) TX_OFF(n, 0x54)
+
+/* RX LANE n (0, 1) registers */
+#define QSERDES_RX_CDR_CONTROL1(n) RX_OFF(n, 0x0)
+#define QSERDES_RX_CDR_CONTROL_HALF(n) RX_OFF(n, 0x8)
+#define QSERDES_RX_RX_EQ_GAIN1_LSB(n) RX_OFF(n, 0xA8)
+#define QSERDES_RX_RX_EQ_GAIN1_MSB(n) RX_OFF(n, 0xAC)
+#define QSERDES_RX_RX_EQ_GAIN2_LSB(n) RX_OFF(n, 0xB0)
+#define QSERDES_RX_RX_EQ_GAIN2_MSB(n) RX_OFF(n, 0xB4)
+#define QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2(n) RX_OFF(n, 0xBC)
+#define QSERDES_RX_CDR_CONTROL_QUARTER(n) RX_OFF(n, 0xC)
+#define QSERDES_RX_SIGDET_CNTRL(n) RX_OFF(n, 0x100)
+
+/* UFS PHY registers */
+#define UFS_PHY_PHY_START PHY_OFF(0x00)
+#define UFS_PHY_POWER_DOWN_CONTROL PHY_OFF(0x4)
+#define UFS_PHY_TX_LANE_ENABLE PHY_OFF(0x44)
+#define UFS_PHY_PWM_G1_CLK_DIVIDER PHY_OFF(0x08)
+#define UFS_PHY_PWM_G2_CLK_DIVIDER PHY_OFF(0x0C)
+#define UFS_PHY_PWM_G3_CLK_DIVIDER PHY_OFF(0x10)
+#define UFS_PHY_PWM_G4_CLK_DIVIDER PHY_OFF(0x14)
+#define UFS_PHY_CORECLK_PWM_G1_CLK_DIVIDER PHY_OFF(0x34)
+#define UFS_PHY_CORECLK_PWM_G2_CLK_DIVIDER PHY_OFF(0x38)
+#define UFS_PHY_CORECLK_PWM_G3_CLK_DIVIDER PHY_OFF(0x3C)
+#define UFS_PHY_CORECLK_PWM_G4_CLK_DIVIDER PHY_OFF(0x40)
+#define UFS_PHY_OMC_STATUS_RDVAL PHY_OFF(0x68)
+#define UFS_PHY_LINE_RESET_TIME PHY_OFF(0x28)
+#define UFS_PHY_LINE_RESET_GRANULARITY PHY_OFF(0x2C)
+#define UFS_PHY_TSYNC_RSYNC_CNTL PHY_OFF(0x48)
+#define UFS_PHY_PLL_CNTL PHY_OFF(0x50)
+#define UFS_PHY_TX_LARGE_AMP_DRV_LVL PHY_OFF(0x54)
+#define UFS_PHY_TX_SMALL_AMP_DRV_LVL PHY_OFF(0x5C)
+#define UFS_PHY_TX_LARGE_AMP_POST_EMP_LVL PHY_OFF(0x58)
+#define UFS_PHY_TX_SMALL_AMP_POST_EMP_LVL PHY_OFF(0x60)
+#define UFS_PHY_CFG_CHANGE_CNT_VAL PHY_OFF(0x64)
+#define UFS_PHY_RX_SYNC_WAIT_TIME PHY_OFF(0x6C)
+#define UFS_PHY_TX_MIN_SLEEP_NOCONFIG_TIME_CAPABILITY PHY_OFF(0xB4)
+#define UFS_PHY_RX_MIN_SLEEP_NOCONFIG_TIME_CAPABILITY PHY_OFF(0xE0)
+#define UFS_PHY_TX_MIN_STALL_NOCONFIG_TIME_CAPABILITY PHY_OFF(0xB8)
+#define UFS_PHY_RX_MIN_STALL_NOCONFIG_TIME_CAPABILITY PHY_OFF(0xE4)
+#define UFS_PHY_TX_MIN_SAVE_CONFIG_TIME_CAPABILITY PHY_OFF(0xBC)
+#define UFS_PHY_RX_MIN_SAVE_CONFIG_TIME_CAPABILITY PHY_OFF(0xE8)
+#define UFS_PHY_RX_PWM_BURST_CLOSURE_LENGTH_CAPABILITY PHY_OFF(0xFC)
+#define UFS_PHY_RX_MIN_ACTIVATETIME_CAPABILITY PHY_OFF(0x100)
+#define UFS_PHY_RX_SIGDET_CTRL3 PHY_OFF(0x14c)
+#define UFS_PHY_RMMI_ATTR_CTRL PHY_OFF(0x160)
+#define UFS_PHY_RMMI_RX_CFGUPDT_L1 (1 << 7)
+#define UFS_PHY_RMMI_TX_CFGUPDT_L1 (1 << 6)
+#define UFS_PHY_RMMI_CFGWR_L1 (1 << 5)
+#define UFS_PHY_RMMI_CFGRD_L1 (1 << 4)
+#define UFS_PHY_RMMI_RX_CFGUPDT_L0 (1 << 3)
+#define UFS_PHY_RMMI_TX_CFGUPDT_L0 (1 << 2)
+#define UFS_PHY_RMMI_CFGWR_L0 (1 << 1)
+#define UFS_PHY_RMMI_CFGRD_L0 (1 << 0)
+#define UFS_PHY_RMMI_ATTRID PHY_OFF(0x164)
+#define UFS_PHY_RMMI_ATTRWRVAL PHY_OFF(0x168)
+#define UFS_PHY_RMMI_ATTRRDVAL_L0_STATUS PHY_OFF(0x16C)
+#define UFS_PHY_RMMI_ATTRRDVAL_L1_STATUS PHY_OFF(0x170)
+#define UFS_PHY_PCS_READY_STATUS PHY_OFF(0x174)
+
+#define UFS_PHY_TX_LANE_ENABLE_MASK 0x3
+
+/*
+ * This structure represents the 20nm specific phy.
+ * common_cfg MUST remain the first field in this structure
+ * in case extra fields are added. This way, when calling
+ * get_ufs_qcom_phy() of generic phy, we can extract the
+ * common phy structure (struct ufs_qcom_phy) out of it
+ * regardless of the relevant specific phy.
+ */
+struct ufs_qcom_phy_qmp_20nm {
+ struct ufs_qcom_phy common_cfg;
+};
+
+static struct ufs_qcom_phy_calibration phy_cal_table_rate_A_1_2_0[] = {
+ UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_POWER_DOWN_CONTROL, 0x01),
+ UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_RX_SIGDET_CTRL3, 0x0D),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_VCOTAIL_EN, 0xe1),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CRCTRL, 0xcc),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_SYSCLK_EN_SEL_TXBAND, 0x08),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CLKEPDIV, 0x03),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_RXTXEPCLK_EN, 0x10),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DEC_START1, 0x82),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DEC_START2, 0x03),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START1, 0x80),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START2, 0x80),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START3, 0x40),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP1, 0xff),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP2, 0x19),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP3, 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP_EN, 0x03),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_RESETSM_CNTRL, 0x90),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_RESETSM_CNTRL2, 0x03),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL1(0), 0xf2),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL_HALF(0), 0x0c),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL_QUARTER(0), 0x12),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL1(1), 0xf2),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL_HALF(1), 0x0c),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL_QUARTER(1), 0x12),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_LSB(0), 0xff),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_MSB(0), 0xff),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_LSB(0), 0xff),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_MSB(0), 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_LSB(1), 0xff),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_MSB(1), 0xff),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_LSB(1), 0xff),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_MSB(1), 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CP_SETI, 0x3f),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_IP_SETP, 0x1b),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CP_SETP, 0x0f),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_IP_SETI, 0x01),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_EMP_POST1_LVL(0), 0x2F),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_DRV_LVL(0), 0x20),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_EMP_POST1_LVL(1), 0x2F),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_DRV_LVL(1), 0x20),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_LANE_MODE(0), 0x68),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_LANE_MODE(1), 0x68),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2(1), 0xdc),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2(0), 0xdc),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x3),
+};
+
+static struct ufs_qcom_phy_calibration phy_cal_table_rate_A_1_3_0[] = {
+ UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_POWER_DOWN_CONTROL, 0x01),
+ UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_RX_SIGDET_CTRL3, 0x0D),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_VCOTAIL_EN, 0xe1),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CRCTRL, 0xcc),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_SYSCLK_EN_SEL_TXBAND, 0x08),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CLKEPDIV, 0x03),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_RXTXEPCLK_EN, 0x10),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DEC_START1, 0x82),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DEC_START2, 0x03),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START1, 0x80),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START2, 0x80),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START3, 0x40),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP1, 0xff),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP2, 0x19),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP3, 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP_EN, 0x03),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_RESETSM_CNTRL, 0x90),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_RESETSM_CNTRL2, 0x03),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL1(0), 0xf2),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL_HALF(0), 0x0c),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL_QUARTER(0), 0x12),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL1(1), 0xf2),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL_HALF(1), 0x0c),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL_QUARTER(1), 0x12),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_LSB(0), 0xff),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_MSB(0), 0xff),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_LSB(0), 0xff),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_MSB(0), 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_LSB(1), 0xff),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_MSB(1), 0xff),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_LSB(1), 0xff),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_MSB(1), 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CP_SETI, 0x2b),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_IP_SETP, 0x38),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CP_SETP, 0x3c),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_RES_CODE_UP_OFFSET, 0x02),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_RES_CODE_DN_OFFSET, 0x02),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_IP_SETI, 0x01),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CNTRL, 0x40),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_LANE_MODE(0), 0x68),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_LANE_MODE(1), 0x68),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2(1), 0xdc),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2(0), 0xdc),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x3),
+};
+
+static struct ufs_qcom_phy_calibration phy_cal_table_rate_B[] = {
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DEC_START1, 0x98),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP1, 0x65),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP2, 0x1e),
+};
+
+#endif
diff --git a/drivers/phy/phy-qcom-ufs.c b/drivers/phy/phy-qcom-ufs.c
new file mode 100644
index 000000000000..44ee983d57fe
--- /dev/null
+++ b/drivers/phy/phy-qcom-ufs.c
@@ -0,0 +1,745 @@
+/*
+ * Copyright (c) 2013-2015, Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include "phy-qcom-ufs-i.h"
+
+#define MAX_PROP_NAME 32
+#define VDDA_PHY_MIN_UV 1000000
+#define VDDA_PHY_MAX_UV 1000000
+#define VDDA_PLL_MIN_UV 1800000
+#define VDDA_PLL_MAX_UV 1800000
+#define VDDP_REF_CLK_MIN_UV 1200000
+#define VDDP_REF_CLK_MAX_UV 1200000
+
+static int __ufs_qcom_phy_init_vreg(struct phy *, struct ufs_qcom_phy_vreg *,
+ const char *, bool);
+static int ufs_qcom_phy_init_vreg(struct phy *, struct ufs_qcom_phy_vreg *,
+ const char *);
+static int ufs_qcom_phy_base_init(struct platform_device *pdev,
+ struct ufs_qcom_phy *phy_common);
+
+int ufs_qcom_phy_calibrate(struct ufs_qcom_phy *ufs_qcom_phy,
+ struct ufs_qcom_phy_calibration *tbl_A,
+ int tbl_size_A,
+ struct ufs_qcom_phy_calibration *tbl_B,
+ int tbl_size_B, bool is_rate_B)
+{
+ int i;
+ int ret = 0;
+
+ if (!tbl_A) {
+ dev_err(ufs_qcom_phy->dev, "%s: tbl_A is NULL", __func__);
+ ret = EINVAL;
+ goto out;
+ }
+
+ for (i = 0; i < tbl_size_A; i++)
+ writel_relaxed(tbl_A[i].cfg_value,
+ ufs_qcom_phy->mmio + tbl_A[i].reg_offset);
+
+ /*
+ * In case we would like to work in rate B, we need
+ * to override a registers that were configured in rate A table
+ * with registers of rate B table.
+ * table.
+ */
+ if (is_rate_B) {
+ if (!tbl_B) {
+ dev_err(ufs_qcom_phy->dev, "%s: tbl_B is NULL",
+ __func__);
+ ret = EINVAL;
+ goto out;
+ }
+
+ for (i = 0; i < tbl_size_B; i++)
+ writel_relaxed(tbl_B[i].cfg_value,
+ ufs_qcom_phy->mmio + tbl_B[i].reg_offset);
+ }
+
+ /* flush buffered writes */
+ mb();
+
+out:
+ return ret;
+}
+
+struct phy *ufs_qcom_phy_generic_probe(struct platform_device *pdev,
+ struct ufs_qcom_phy *common_cfg,
+ struct phy_ops *ufs_qcom_phy_gen_ops,
+ struct ufs_qcom_phy_specific_ops *phy_spec_ops)
+{
+ int err;
+ struct device *dev = &pdev->dev;
+ struct phy *generic_phy = NULL;
+ struct phy_provider *phy_provider;
+
+ err = ufs_qcom_phy_base_init(pdev, common_cfg);
+ if (err) {
+ dev_err(dev, "%s: phy base init failed %d\n", __func__, err);
+ goto out;
+ }
+
+ phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+ if (IS_ERR(phy_provider)) {
+ err = PTR_ERR(phy_provider);
+ dev_err(dev, "%s: failed to register phy %d\n", __func__, err);
+ goto out;
+ }
+
+ generic_phy = devm_phy_create(dev, NULL, ufs_qcom_phy_gen_ops);
+ if (IS_ERR(generic_phy)) {
+ err = PTR_ERR(generic_phy);
+ dev_err(dev, "%s: failed to create phy %d\n", __func__, err);
+ goto out;
+ }
+
+ common_cfg->phy_spec_ops = phy_spec_ops;
+ common_cfg->dev = dev;
+
+out:
+ return generic_phy;
+}
+
+/*
+ * This assumes the embedded phy structure inside generic_phy is of type
+ * struct ufs_qcom_phy. In order to function properly it's crucial
+ * to keep the embedded struct "struct ufs_qcom_phy common_cfg"
+ * as the first inside generic_phy.
+ */
+struct ufs_qcom_phy *get_ufs_qcom_phy(struct phy *generic_phy)
+{
+ return (struct ufs_qcom_phy *)phy_get_drvdata(generic_phy);
+}
+
+static
+int ufs_qcom_phy_base_init(struct platform_device *pdev,
+ struct ufs_qcom_phy *phy_common)
+{
+ struct device *dev = &pdev->dev;
+ struct resource *res;
+ int err = 0;
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "phy_mem");
+ if (!res) {
+ dev_err(dev, "%s: phy_mem resource not found\n", __func__);
+ err = -ENOMEM;
+ goto out;
+ }
+
+ phy_common->mmio = devm_ioremap_resource(dev, res);
+ if (IS_ERR((void const *)phy_common->mmio)) {
+ err = PTR_ERR((void const *)phy_common->mmio);
+ phy_common->mmio = NULL;
+ dev_err(dev, "%s: ioremap for phy_mem resource failed %d\n",
+ __func__, err);
+ goto out;
+ }
+
+ /* "dev_ref_clk_ctrl_mem" is optional resource */
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+ "dev_ref_clk_ctrl_mem");
+ if (!res) {
+ dev_dbg(dev, "%s: dev_ref_clk_ctrl_mem resource not found\n",
+ __func__);
+ goto out;
+ }
+
+ phy_common->dev_ref_clk_ctrl_mmio = devm_ioremap_resource(dev, res);
+ if (IS_ERR((void const *)phy_common->dev_ref_clk_ctrl_mmio)) {
+ err = PTR_ERR((void const *)phy_common->dev_ref_clk_ctrl_mmio);
+ phy_common->dev_ref_clk_ctrl_mmio = NULL;
+ dev_err(dev, "%s: ioremap for dev_ref_clk_ctrl_mem resource failed %d\n",
+ __func__, err);
+ }
+
+out:
+ return err;
+}
+
+static int __ufs_qcom_phy_clk_get(struct phy *phy,
+ const char *name, struct clk **clk_out, bool err_print)
+{
+ struct clk *clk;
+ int err = 0;
+ struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(phy);
+ struct device *dev = ufs_qcom_phy->dev;
+
+ clk = devm_clk_get(dev, name);
+ if (IS_ERR(clk)) {
+ err = PTR_ERR(clk);
+ if (err_print)
+ dev_err(dev, "failed to get %s err %d", name, err);
+ } else {
+ *clk_out = clk;
+ }
+
+ return err;
+}
+
+static
+int ufs_qcom_phy_clk_get(struct phy *phy,
+ const char *name, struct clk **clk_out)
+{
+ return __ufs_qcom_phy_clk_get(phy, name, clk_out, true);
+}
+
+int
+ufs_qcom_phy_init_clks(struct phy *generic_phy,
+ struct ufs_qcom_phy *phy_common)
+{
+ int err;
+
+ err = ufs_qcom_phy_clk_get(generic_phy, "tx_iface_clk",
+ &phy_common->tx_iface_clk);
+ if (err)
+ goto out;
+
+ err = ufs_qcom_phy_clk_get(generic_phy, "rx_iface_clk",
+ &phy_common->rx_iface_clk);
+ if (err)
+ goto out;
+
+ err = ufs_qcom_phy_clk_get(generic_phy, "ref_clk_src",
+ &phy_common->ref_clk_src);
+ if (err)
+ goto out;
+
+ /*
+ * "ref_clk_parent" is optional hence don't abort init if it's not
+ * found.
+ */
+ __ufs_qcom_phy_clk_get(generic_phy, "ref_clk_parent",
+ &phy_common->ref_clk_parent, false);
+
+ err = ufs_qcom_phy_clk_get(generic_phy, "ref_clk",
+ &phy_common->ref_clk);
+
+out:
+ return err;
+}
+
+int
+ufs_qcom_phy_init_vregulators(struct phy *generic_phy,
+ struct ufs_qcom_phy *phy_common)
+{
+ int err;
+
+ err = ufs_qcom_phy_init_vreg(generic_phy, &phy_common->vdda_pll,
+ "vdda-pll");
+ if (err)
+ goto out;
+
+ err = ufs_qcom_phy_init_vreg(generic_phy, &phy_common->vdda_phy,
+ "vdda-phy");
+
+ if (err)
+ goto out;
+
+ /* vddp-ref-clk-* properties are optional */
+ __ufs_qcom_phy_init_vreg(generic_phy, &phy_common->vddp_ref_clk,
+ "vddp-ref-clk", true);
+out:
+ return err;
+}
+
+static int __ufs_qcom_phy_init_vreg(struct phy *phy,
+ struct ufs_qcom_phy_vreg *vreg, const char *name, bool optional)
+{
+ int err = 0;
+ struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(phy);
+ struct device *dev = ufs_qcom_phy->dev;
+
+ char prop_name[MAX_PROP_NAME];
+
+ vreg->name = kstrdup(name, GFP_KERNEL);
+ if (!vreg->name) {
+ err = -ENOMEM;
+ goto out;
+ }
+
+ vreg->reg = devm_regulator_get(dev, name);
+ if (IS_ERR(vreg->reg)) {
+ err = PTR_ERR(vreg->reg);
+ vreg->reg = NULL;
+ if (!optional)
+ dev_err(dev, "failed to get %s, %d\n", name, err);
+ goto out;
+ }
+
+ if (dev->of_node) {
+ snprintf(prop_name, MAX_PROP_NAME, "%s-max-microamp", name);
+ err = of_property_read_u32(dev->of_node,
+ prop_name, &vreg->max_uA);
+ if (err && err != -EINVAL) {
+ dev_err(dev, "%s: failed to read %s\n",
+ __func__, prop_name);
+ goto out;
+ } else if (err == -EINVAL || !vreg->max_uA) {
+ if (regulator_count_voltages(vreg->reg) > 0) {
+ dev_err(dev, "%s: %s is mandatory\n",
+ __func__, prop_name);
+ goto out;
+ }
+ err = 0;
+ }
+ snprintf(prop_name, MAX_PROP_NAME, "%s-always-on", name);
+ if (of_get_property(dev->of_node, prop_name, NULL))
+ vreg->is_always_on = true;
+ else
+ vreg->is_always_on = false;
+ }
+
+ if (!strcmp(name, "vdda-pll")) {
+ vreg->max_uV = VDDA_PLL_MAX_UV;
+ vreg->min_uV = VDDA_PLL_MIN_UV;
+ } else if (!strcmp(name, "vdda-phy")) {
+ vreg->max_uV = VDDA_PHY_MAX_UV;
+ vreg->min_uV = VDDA_PHY_MIN_UV;
+ } else if (!strcmp(name, "vddp-ref-clk")) {
+ vreg->max_uV = VDDP_REF_CLK_MAX_UV;
+ vreg->min_uV = VDDP_REF_CLK_MIN_UV;
+ }
+
+out:
+ if (err)
+ kfree(vreg->name);
+ return err;
+}
+
+static int ufs_qcom_phy_init_vreg(struct phy *phy,
+ struct ufs_qcom_phy_vreg *vreg, const char *name)
+{
+ return __ufs_qcom_phy_init_vreg(phy, vreg, name, false);
+}
+
+static
+int ufs_qcom_phy_cfg_vreg(struct phy *phy,
+ struct ufs_qcom_phy_vreg *vreg, bool on)
+{
+ int ret = 0;
+ struct regulator *reg = vreg->reg;
+ const char *name = vreg->name;
+ int min_uV;
+ int uA_load;
+ struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(phy);
+ struct device *dev = ufs_qcom_phy->dev;
+
+ BUG_ON(!vreg);
+
+ if (regulator_count_voltages(reg) > 0) {
+ min_uV = on ? vreg->min_uV : 0;
+ ret = regulator_set_voltage(reg, min_uV, vreg->max_uV);
+ if (ret) {
+ dev_err(dev, "%s: %s set voltage failed, err=%d\n",
+ __func__, name, ret);
+ goto out;
+ }
+ uA_load = on ? vreg->max_uA : 0;
+ ret = regulator_set_optimum_mode(reg, uA_load);
+ if (ret >= 0) {
+ /*
+ * regulator_set_optimum_mode() returns new regulator
+ * mode upon success.
+ */
+ ret = 0;
+ } else {
+ dev_err(dev, "%s: %s set optimum mode(uA_load=%d) failed, err=%d\n",
+ __func__, name, uA_load, ret);
+ goto out;
+ }
+ }
+out:
+ return ret;
+}
+
+static
+int ufs_qcom_phy_enable_vreg(struct phy *phy,
+ struct ufs_qcom_phy_vreg *vreg)
+{
+ struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(phy);
+ struct device *dev = ufs_qcom_phy->dev;
+ int ret = 0;
+
+ if (!vreg || vreg->enabled)
+ goto out;
+
+ ret = ufs_qcom_phy_cfg_vreg(phy, vreg, true);
+ if (ret) {
+ dev_err(dev, "%s: ufs_qcom_phy_cfg_vreg() failed, err=%d\n",
+ __func__, ret);
+ goto out;
+ }
+
+ ret = regulator_enable(vreg->reg);
+ if (ret) {
+ dev_err(dev, "%s: enable failed, err=%d\n",
+ __func__, ret);
+ goto out;
+ }
+
+ vreg->enabled = true;
+out:
+ return ret;
+}
+
+int ufs_qcom_phy_enable_ref_clk(struct phy *generic_phy)
+{
+ int ret = 0;
+ struct ufs_qcom_phy *phy = get_ufs_qcom_phy(generic_phy);
+
+ if (phy->is_ref_clk_enabled)
+ goto out;
+
+ /*
+ * reference clock is propagated in a daisy-chained manner from
+ * source to phy, so ungate them at each stage.
+ */
+ ret = clk_prepare_enable(phy->ref_clk_src);
+ if (ret) {
+ dev_err(phy->dev, "%s: ref_clk_src enable failed %d\n",
+ __func__, ret);
+ goto out;
+ }
+
+ /*
+ * "ref_clk_parent" is optional clock hence make sure that clk reference
+ * is available before trying to enable the clock.
+ */
+ if (phy->ref_clk_parent) {
+ ret = clk_prepare_enable(phy->ref_clk_parent);
+ if (ret) {
+ dev_err(phy->dev, "%s: ref_clk_parent enable failed %d\n",
+ __func__, ret);
+ goto out_disable_src;
+ }
+ }
+
+ ret = clk_prepare_enable(phy->ref_clk);
+ if (ret) {
+ dev_err(phy->dev, "%s: ref_clk enable failed %d\n",
+ __func__, ret);
+ goto out_disable_parent;
+ }
+
+ phy->is_ref_clk_enabled = true;
+ goto out;
+
+out_disable_parent:
+ if (phy->ref_clk_parent)
+ clk_disable_unprepare(phy->ref_clk_parent);
+out_disable_src:
+ clk_disable_unprepare(phy->ref_clk_src);
+out:
+ return ret;
+}
+
+static
+int ufs_qcom_phy_disable_vreg(struct phy *phy,
+ struct ufs_qcom_phy_vreg *vreg)
+{
+ struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(phy);
+ struct device *dev = ufs_qcom_phy->dev;
+ int ret = 0;
+
+ if (!vreg || !vreg->enabled || vreg->is_always_on)
+ goto out;
+
+ ret = regulator_disable(vreg->reg);
+
+ if (!ret) {
+ /* ignore errors on applying disable config */
+ ufs_qcom_phy_cfg_vreg(phy, vreg, false);
+ vreg->enabled = false;
+ } else {
+ dev_err(dev, "%s: %s disable failed, err=%d\n",
+ __func__, vreg->name, ret);
+ }
+out:
+ return ret;
+}
+
+void ufs_qcom_phy_disable_ref_clk(struct phy *generic_phy)
+{
+ struct ufs_qcom_phy *phy = get_ufs_qcom_phy(generic_phy);
+
+ if (phy->is_ref_clk_enabled) {
+ clk_disable_unprepare(phy->ref_clk);
+ /*
+ * "ref_clk_parent" is optional clock hence make sure that clk
+ * reference is available before trying to disable the clock.
+ */
+ if (phy->ref_clk_parent)
+ clk_disable_unprepare(phy->ref_clk_parent);
+ clk_disable_unprepare(phy->ref_clk_src);
+ phy->is_ref_clk_enabled = false;
+ }
+}
+
+#define UFS_REF_CLK_EN (1 << 5)
+
+static void ufs_qcom_phy_dev_ref_clk_ctrl(struct phy *generic_phy, bool enable)
+{
+ struct ufs_qcom_phy *phy = get_ufs_qcom_phy(generic_phy);
+
+ if (phy->dev_ref_clk_ctrl_mmio &&
+ (enable ^ phy->is_dev_ref_clk_enabled)) {
+ u32 temp = readl_relaxed(phy->dev_ref_clk_ctrl_mmio);
+
+ if (enable)
+ temp |= UFS_REF_CLK_EN;
+ else
+ temp &= ~UFS_REF_CLK_EN;
+
+ /*
+ * If we are here to disable this clock immediately after
+ * entering into hibern8, we need to make sure that device
+ * ref_clk is active atleast 1us after the hibern8 enter.
+ */
+ if (!enable)
+ udelay(1);
+
+ writel_relaxed(temp, phy->dev_ref_clk_ctrl_mmio);
+ /* ensure that ref_clk is enabled/disabled before we return */
+ wmb();
+ /*
+ * If we call hibern8 exit after this, we need to make sure that
+ * device ref_clk is stable for atleast 1us before the hibern8
+ * exit command.
+ */
+ if (enable)
+ udelay(1);
+
+ phy->is_dev_ref_clk_enabled = enable;
+ }
+}
+
+void ufs_qcom_phy_enable_dev_ref_clk(struct phy *generic_phy)
+{
+ ufs_qcom_phy_dev_ref_clk_ctrl(generic_phy, true);
+}
+
+void ufs_qcom_phy_disable_dev_ref_clk(struct phy *generic_phy)
+{
+ ufs_qcom_phy_dev_ref_clk_ctrl(generic_phy, false);
+}
+
+/* Turn ON M-PHY RMMI interface clocks */
+int ufs_qcom_phy_enable_iface_clk(struct phy *generic_phy)
+{
+ struct ufs_qcom_phy *phy = get_ufs_qcom_phy(generic_phy);
+ int ret = 0;
+
+ if (phy->is_iface_clk_enabled)
+ goto out;
+
+ ret = clk_prepare_enable(phy->tx_iface_clk);
+ if (ret) {
+ dev_err(phy->dev, "%s: tx_iface_clk enable failed %d\n",
+ __func__, ret);
+ goto out;
+ }
+ ret = clk_prepare_enable(phy->rx_iface_clk);
+ if (ret) {
+ clk_disable_unprepare(phy->tx_iface_clk);
+ dev_err(phy->dev, "%s: rx_iface_clk enable failed %d. disabling also tx_iface_clk\n",
+ __func__, ret);
+ goto out;
+ }
+ phy->is_iface_clk_enabled = true;
+
+out:
+ return ret;
+}
+
+/* Turn OFF M-PHY RMMI interface clocks */
+void ufs_qcom_phy_disable_iface_clk(struct phy *generic_phy)
+{
+ struct ufs_qcom_phy *phy = get_ufs_qcom_phy(generic_phy);
+
+ if (phy->is_iface_clk_enabled) {
+ clk_disable_unprepare(phy->tx_iface_clk);
+ clk_disable_unprepare(phy->rx_iface_clk);
+ phy->is_iface_clk_enabled = false;
+ }
+}
+
+int ufs_qcom_phy_start_serdes(struct phy *generic_phy)
+{
+ struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(generic_phy);
+ int ret = 0;
+
+ if (!ufs_qcom_phy->phy_spec_ops->start_serdes) {
+ dev_err(ufs_qcom_phy->dev, "%s: start_serdes() callback is not supported\n",
+ __func__);
+ ret = -ENOTSUPP;
+ } else {
+ ufs_qcom_phy->phy_spec_ops->start_serdes(ufs_qcom_phy);
+ }
+
+ return ret;
+}
+
+int ufs_qcom_phy_set_tx_lane_enable(struct phy *generic_phy, u32 tx_lanes)
+{
+ struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(generic_phy);
+ int ret = 0;
+
+ if (!ufs_qcom_phy->phy_spec_ops->set_tx_lane_enable) {
+ dev_err(ufs_qcom_phy->dev, "%s: set_tx_lane_enable() callback is not supported\n",
+ __func__);
+ ret = -ENOTSUPP;
+ } else {
+ ufs_qcom_phy->phy_spec_ops->set_tx_lane_enable(ufs_qcom_phy,
+ tx_lanes);
+ }
+
+ return ret;
+}
+
+void ufs_qcom_phy_save_controller_version(struct phy *generic_phy,
+ u8 major, u16 minor, u16 step)
+{
+ struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(generic_phy);
+
+ ufs_qcom_phy->host_ctrl_rev_major = major;
+ ufs_qcom_phy->host_ctrl_rev_minor = minor;
+ ufs_qcom_phy->host_ctrl_rev_step = step;
+}
+
+int ufs_qcom_phy_calibrate_phy(struct phy *generic_phy, bool is_rate_B)
+{
+ struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(generic_phy);
+ int ret = 0;
+
+ if (!ufs_qcom_phy->phy_spec_ops->calibrate_phy) {
+ dev_err(ufs_qcom_phy->dev, "%s: calibrate_phy() callback is not supported\n",
+ __func__);
+ ret = -ENOTSUPP;
+ } else {
+ ret = ufs_qcom_phy->phy_spec_ops->
+ calibrate_phy(ufs_qcom_phy, is_rate_B);
+ if (ret)
+ dev_err(ufs_qcom_phy->dev, "%s: calibrate_phy() failed %d\n",
+ __func__, ret);
+ }
+
+ return ret;
+}
+
+int ufs_qcom_phy_remove(struct phy *generic_phy,
+ struct ufs_qcom_phy *ufs_qcom_phy)
+{
+ phy_power_off(generic_phy);
+
+ kfree(ufs_qcom_phy->vdda_pll.name);
+ kfree(ufs_qcom_phy->vdda_phy.name);
+
+ return 0;
+}
+
+int ufs_qcom_phy_exit(struct phy *generic_phy)
+{
+ struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(generic_phy);
+
+ if (ufs_qcom_phy->is_powered_on)
+ phy_power_off(generic_phy);
+
+ return 0;
+}
+
+int ufs_qcom_phy_is_pcs_ready(struct phy *generic_phy)
+{
+ struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(generic_phy);
+
+ if (!ufs_qcom_phy->phy_spec_ops->is_physical_coding_sublayer_ready) {
+ dev_err(ufs_qcom_phy->dev, "%s: is_physical_coding_sublayer_ready() callback is not supported\n",
+ __func__);
+ return -ENOTSUPP;
+ }
+
+ return ufs_qcom_phy->phy_spec_ops->
+ is_physical_coding_sublayer_ready(ufs_qcom_phy);
+}
+
+int ufs_qcom_phy_power_on(struct phy *generic_phy)
+{
+ struct ufs_qcom_phy *phy_common = get_ufs_qcom_phy(generic_phy);
+ struct device *dev = phy_common->dev;
+ int err;
+
+ err = ufs_qcom_phy_enable_vreg(generic_phy, &phy_common->vdda_phy);
+ if (err) {
+ dev_err(dev, "%s enable vdda_phy failed, err=%d\n",
+ __func__, err);
+ goto out;
+ }
+
+ phy_common->phy_spec_ops->power_control(phy_common, true);
+
+ /* vdda_pll also enables ref clock LDOs so enable it first */
+ err = ufs_qcom_phy_enable_vreg(generic_phy, &phy_common->vdda_pll);
+ if (err) {
+ dev_err(dev, "%s enable vdda_pll failed, err=%d\n",
+ __func__, err);
+ goto out_disable_phy;
+ }
+
+ err = ufs_qcom_phy_enable_ref_clk(generic_phy);
+ if (err) {
+ dev_err(dev, "%s enable phy ref clock failed, err=%d\n",
+ __func__, err);
+ goto out_disable_pll;
+ }
+
+ /* enable device PHY ref_clk pad rail */
+ if (phy_common->vddp_ref_clk.reg) {
+ err = ufs_qcom_phy_enable_vreg(generic_phy,
+ &phy_common->vddp_ref_clk);
+ if (err) {
+ dev_err(dev, "%s enable vddp_ref_clk failed, err=%d\n",
+ __func__, err);
+ goto out_disable_ref_clk;
+ }
+ }
+
+ phy_common->is_powered_on = true;
+ goto out;
+
+out_disable_ref_clk:
+ ufs_qcom_phy_disable_ref_clk(generic_phy);
+out_disable_pll:
+ ufs_qcom_phy_disable_vreg(generic_phy, &phy_common->vdda_pll);
+out_disable_phy:
+ ufs_qcom_phy_disable_vreg(generic_phy, &phy_common->vdda_phy);
+out:
+ return err;
+}
+
+int ufs_qcom_phy_power_off(struct phy *generic_phy)
+{
+ struct ufs_qcom_phy *phy_common = get_ufs_qcom_phy(generic_phy);
+
+ phy_common->phy_spec_ops->power_control(phy_common, false);
+
+ if (phy_common->vddp_ref_clk.reg)
+ ufs_qcom_phy_disable_vreg(generic_phy,
+ &phy_common->vddp_ref_clk);
+ ufs_qcom_phy_disable_ref_clk(generic_phy);
+
+ ufs_qcom_phy_disable_vreg(generic_phy, &phy_common->vdda_pll);
+ ufs_qcom_phy_disable_vreg(generic_phy, &phy_common->vdda_phy);
+ phy_common->is_powered_on = false;
+
+ return 0;
+}
diff --git a/drivers/scsi/3w-9xxx.c b/drivers/scsi/3w-9xxx.c
index cd4129ff7ae4..7600639db4c4 100644
--- a/drivers/scsi/3w-9xxx.c
+++ b/drivers/scsi/3w-9xxx.c
@@ -608,7 +608,8 @@ static int twa_check_srl(TW_Device_Extension *tw_dev, int *flashed)
}
/* Load rest of compatibility struct */
- strncpy(tw_dev->tw_compat_info.driver_version, TW_DRIVER_VERSION, strlen(TW_DRIVER_VERSION));
+ strlcpy(tw_dev->tw_compat_info.driver_version, TW_DRIVER_VERSION,
+ sizeof(tw_dev->tw_compat_info.driver_version));
tw_dev->tw_compat_info.driver_srl_high = TW_CURRENT_DRIVER_SRL;
tw_dev->tw_compat_info.driver_branch_high = TW_CURRENT_DRIVER_BRANCH;
tw_dev->tw_compat_info.driver_build_high = TW_CURRENT_DRIVER_BUILD;
diff --git a/drivers/scsi/BusLogic.c b/drivers/scsi/BusLogic.c
index 8d66a6469e29..c7be7bb37209 100644
--- a/drivers/scsi/BusLogic.c
+++ b/drivers/scsi/BusLogic.c
@@ -3485,7 +3485,7 @@ static int blogic_show_info(struct seq_file *m, struct Scsi_Host *shost)
seq_printf(m, "\n\
Current Driver Queue Depth: %d\n\
Currently Allocated CCBs: %d\n", adapter->drvr_qdepth, adapter->alloc_ccbs);
- seq_printf(m, "\n\n\
+ seq_puts(m, "\n\n\
DATA TRANSFER STATISTICS\n\
\n\
Target Tagged Queuing Queue Depth Active Attempted Completed\n\
@@ -3500,7 +3500,7 @@ Target Tagged Queuing Queue Depth Active Attempted Completed\n\
seq_printf(m,
" %3d %3u %9u %9u\n", adapter->qdepth[tgt], adapter->active_cmds[tgt], tgt_stats[tgt].cmds_tried, tgt_stats[tgt].cmds_complete);
}
- seq_printf(m, "\n\
+ seq_puts(m, "\n\
Target Read Commands Write Commands Total Bytes Read Total Bytes Written\n\
====== ============= ============== =================== ===================\n");
for (tgt = 0; tgt < adapter->maxdev; tgt++) {
@@ -3517,7 +3517,7 @@ Target Read Commands Write Commands Total Bytes Read Total Bytes Written\
else
seq_printf(m, " %9u\n", tgt_stats[tgt].byteswritten.units);
}
- seq_printf(m, "\n\
+ seq_puts(m, "\n\
Target Command 0-1KB 1-2KB 2-4KB 4-8KB 8-16KB\n\
====== ======= ========= ========= ========= ========= =========\n");
for (tgt = 0; tgt < adapter->maxdev; tgt++) {
@@ -3533,7 +3533,7 @@ Target Command 0-1KB 1-2KB 2-4KB 4-8KB 8-16KB\n\
tgt_stats[tgt].write_sz_buckets[0],
tgt_stats[tgt].write_sz_buckets[1], tgt_stats[tgt].write_sz_buckets[2], tgt_stats[tgt].write_sz_buckets[3], tgt_stats[tgt].write_sz_buckets[4]);
}
- seq_printf(m, "\n\
+ seq_puts(m, "\n\
Target Command 16-32KB 32-64KB 64-128KB 128-256KB 256KB+\n\
====== ======= ========= ========= ========= ========= =========\n");
for (tgt = 0; tgt < adapter->maxdev; tgt++) {
@@ -3549,7 +3549,7 @@ Target Command 16-32KB 32-64KB 64-128KB 128-256KB 256KB+\n\
tgt_stats[tgt].write_sz_buckets[5],
tgt_stats[tgt].write_sz_buckets[6], tgt_stats[tgt].write_sz_buckets[7], tgt_stats[tgt].write_sz_buckets[8], tgt_stats[tgt].write_sz_buckets[9]);
}
- seq_printf(m, "\n\n\
+ seq_puts(m, "\n\n\
ERROR RECOVERY STATISTICS\n\
\n\
Command Aborts Bus Device Resets Host Adapter Resets\n\
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index 9c92f415229f..b021bcb88537 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -201,12 +201,12 @@ config SCSI_ENCLOSURE
certain enclosure conditions to be reported and is not required.
config SCSI_CONSTANTS
- bool "Verbose SCSI error reporting (kernel size +=12K)"
+ bool "Verbose SCSI error reporting (kernel size +=75K)"
depends on SCSI
help
The error messages regarding your SCSI hardware will be easier to
understand if you say Y here; it will enlarge your kernel by about
- 12 KB. If in doubt, say Y.
+ 75 KB. If in doubt, say Y.
config SCSI_LOGGING
bool "SCSI logging facility"
diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile
index 58158f11ed7b..dee160a4f163 100644
--- a/drivers/scsi/Makefile
+++ b/drivers/scsi/Makefile
@@ -159,15 +159,15 @@ obj-$(CONFIG_SCSI_OSD_INITIATOR) += osd/
# This goes last, so that "real" scsi devices probe earlier
obj-$(CONFIG_SCSI_DEBUG) += scsi_debug.o
-
-scsi_mod-y += scsi.o hosts.o scsi_ioctl.o constants.o \
+scsi_mod-y += scsi.o hosts.o scsi_ioctl.o \
scsicam.o scsi_error.o scsi_lib.o
+scsi_mod-$(CONFIG_SCSI_CONSTANTS) += constants.o
scsi_mod-$(CONFIG_SCSI_DMA) += scsi_lib_dma.o
scsi_mod-y += scsi_scan.o scsi_sysfs.o scsi_devinfo.o
scsi_mod-$(CONFIG_SCSI_NETLINK) += scsi_netlink.o
scsi_mod-$(CONFIG_SYSCTL) += scsi_sysctl.o
scsi_mod-$(CONFIG_SCSI_PROC_FS) += scsi_proc.o
-scsi_mod-y += scsi_trace.o
+scsi_mod-y += scsi_trace.o scsi_logging.o
scsi_mod-$(CONFIG_PM) += scsi_pm.o
hv_storvsc-y := storvsc_drv.o
diff --git a/drivers/scsi/NCR5380.c b/drivers/scsi/NCR5380.c
index 36244d63def2..8981701802ca 100644
--- a/drivers/scsi/NCR5380.c
+++ b/drivers/scsi/NCR5380.c
@@ -716,8 +716,6 @@ static int __maybe_unused NCR5380_write_info(struct Scsi_Host *instance,
}
#endif
-#undef SPRINTF
-#define SPRINTF(args...) seq_printf(m, ## args)
static
void lprint_Scsi_Cmnd(struct scsi_cmnd *cmd, struct seq_file *m);
static
@@ -734,19 +732,19 @@ static int __maybe_unused NCR5380_show_info(struct seq_file *m,
hostdata = (struct NCR5380_hostdata *) instance->hostdata;
#ifdef PSEUDO_DMA
- SPRINTF("Highwater I/O busy spin counts: write %d, read %d\n",
+ seq_printf(m, "Highwater I/O busy spin counts: write %d, read %d\n",
hostdata->spin_max_w, hostdata->spin_max_r);
#endif
spin_lock_irq(instance->host_lock);
if (!hostdata->connected)
- SPRINTF("scsi%d: no currently connected command\n", instance->host_no);
+ seq_printf(m, "scsi%d: no currently connected command\n", instance->host_no);
else
lprint_Scsi_Cmnd((struct scsi_cmnd *) hostdata->connected, m);
- SPRINTF("scsi%d: issue_queue\n", instance->host_no);
+ seq_printf(m, "scsi%d: issue_queue\n", instance->host_no);
for (ptr = (struct scsi_cmnd *) hostdata->issue_queue; ptr; ptr = (struct scsi_cmnd *) ptr->host_scribble)
lprint_Scsi_Cmnd(ptr, m);
- SPRINTF("scsi%d: disconnected_queue\n", instance->host_no);
+ seq_printf(m, "scsi%d: disconnected_queue\n", instance->host_no);
for (ptr = (struct scsi_cmnd *) hostdata->disconnected_queue; ptr; ptr = (struct scsi_cmnd *) ptr->host_scribble)
lprint_Scsi_Cmnd(ptr, m);
spin_unlock_irq(instance->host_lock);
@@ -755,8 +753,8 @@ static int __maybe_unused NCR5380_show_info(struct seq_file *m,
static void lprint_Scsi_Cmnd(struct scsi_cmnd *cmd, struct seq_file *m)
{
- SPRINTF("scsi%d : destination target %d, lun %llu\n", cmd->device->host->host_no, cmd->device->id, cmd->device->lun);
- SPRINTF(" command = ");
+ seq_printf(m, "scsi%d : destination target %d, lun %llu\n", cmd->device->host->host_no, cmd->device->id, cmd->device->lun);
+ seq_puts(m, " command = ");
lprint_command(cmd->cmnd, m);
}
@@ -765,13 +763,13 @@ static void lprint_command(unsigned char *command, struct seq_file *m)
int i, s;
lprint_opcode(command[0], m);
for (i = 1, s = COMMAND_SIZE(command[0]); i < s; ++i)
- SPRINTF("%02x ", command[i]);
- SPRINTF("\n");
+ seq_printf(m, "%02x ", command[i]);
+ seq_putc(m, '\n');
}
static void lprint_opcode(int opcode, struct seq_file *m)
{
- SPRINTF("%2d (0x%02x)", opcode, opcode);
+ seq_printf(m, "%2d (0x%02x)", opcode, opcode);
}
diff --git a/drivers/scsi/advansys.c b/drivers/scsi/advansys.c
index 2c5ce48c8f95..ae95e347f37d 100644
--- a/drivers/scsi/advansys.c
+++ b/drivers/scsi/advansys.c
@@ -2880,7 +2880,7 @@ static void asc_prt_board_devices(struct seq_file *m, struct Scsi_Host *shost)
chip_scsi_id = boardp->dvc_var.adv_dvc_var.chip_scsi_id;
}
- seq_printf(m, "Target IDs Detected:");
+ seq_puts(m, "Target IDs Detected:");
for (i = 0; i <= ADV_MAX_TID; i++) {
if (boardp->init_tidmask & ADV_TID_TO_TIDMASK(i))
seq_printf(m, " %X,", i);
@@ -2896,18 +2896,16 @@ static void asc_prt_adv_bios(struct seq_file *m, struct Scsi_Host *shost)
struct asc_board *boardp = shost_priv(shost);
ushort major, minor, letter;
- seq_printf(m, "\nROM BIOS Version: ");
+ seq_puts(m, "\nROM BIOS Version: ");
/*
* If the BIOS saved a valid signature, then fill in
* the BIOS code segment base address.
*/
if (boardp->bios_signature != 0x55AA) {
- seq_printf(m, "Disabled or Pre-3.1\n");
- seq_printf(m,
- "BIOS either disabled or Pre-3.1. If it is pre-3.1, then a newer version\n");
- seq_printf(m,
- "can be found at the ConnectCom FTP site: ftp://ftp.connectcom.net/pub\n");
+ seq_puts(m, "Disabled or Pre-3.1\n"
+ "BIOS either disabled or Pre-3.1. If it is pre-3.1, then a newer version\n"
+ "can be found at the ConnectCom FTP site: ftp://ftp.connectcom.net/pub\n");
} else {
major = (boardp->bios_version >> 12) & 0xF;
minor = (boardp->bios_version >> 8) & 0xF;
@@ -2923,10 +2921,8 @@ static void asc_prt_adv_bios(struct seq_file *m, struct Scsi_Host *shost)
*/
if (major < 3 || (major <= 3 && minor < 1) ||
(major <= 3 && minor <= 1 && letter < ('I' - 'A'))) {
- seq_printf(m,
- "Newer version of ROM BIOS is available at the ConnectCom FTP site:\n");
- seq_printf(m,
- "ftp://ftp.connectcom.net/pub\n");
+ seq_puts(m, "Newer version of ROM BIOS is available at the ConnectCom FTP site:\n"
+ "ftp://ftp.connectcom.net/pub\n");
}
}
}
@@ -3056,11 +3052,10 @@ static void asc_prt_asc_board_eeprom(struct seq_file *m, struct Scsi_Host *shost
== ASC_TRUE)
seq_printf(m, " Serial Number: %s\n", serialstr);
else if (ep->adapter_info[5] == 0xBB)
- seq_printf(m,
- " Default Settings Used for EEPROM-less Adapter.\n");
+ seq_puts(m,
+ " Default Settings Used for EEPROM-less Adapter.\n");
else
- seq_printf(m,
- " Serial Number Signature Not Present.\n");
+ seq_puts(m, " Serial Number Signature Not Present.\n");
seq_printf(m,
" Host SCSI ID: %u, Host Queue Size: %u, Device Queue Size: %u\n",
@@ -3070,34 +3065,30 @@ static void asc_prt_asc_board_eeprom(struct seq_file *m, struct Scsi_Host *shost
seq_printf(m,
" cntl 0x%x, no_scam 0x%x\n", ep->cntl, ep->no_scam);
- seq_printf(m, " Target ID: ");
+ seq_puts(m, " Target ID: ");
for (i = 0; i <= ASC_MAX_TID; i++)
seq_printf(m, " %d", i);
- seq_printf(m, "\n");
- seq_printf(m, " Disconnects: ");
+ seq_puts(m, "\n Disconnects: ");
for (i = 0; i <= ASC_MAX_TID; i++)
seq_printf(m, " %c",
(ep->disc_enable & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N');
- seq_printf(m, "\n");
- seq_printf(m, " Command Queuing: ");
+ seq_puts(m, "\n Command Queuing: ");
for (i = 0; i <= ASC_MAX_TID; i++)
seq_printf(m, " %c",
(ep->use_cmd_qng & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N');
- seq_printf(m, "\n");
- seq_printf(m, " Start Motor: ");
+ seq_puts(m, "\n Start Motor: ");
for (i = 0; i <= ASC_MAX_TID; i++)
seq_printf(m, " %c",
(ep->start_motor & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N');
- seq_printf(m, "\n");
- seq_printf(m, " Synchronous Transfer:");
+ seq_puts(m, "\n Synchronous Transfer:");
for (i = 0; i <= ASC_MAX_TID; i++)
seq_printf(m, " %c",
(ep->init_sdtr & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N');
- seq_printf(m, "\n");
+ seq_putc(m, '\n');
#ifdef CONFIG_ISA
if (asc_dvc_varp->bus_type & ASC_IS_ISA) {
@@ -3151,7 +3142,7 @@ static void asc_prt_adv_board_eeprom(struct seq_file *m, struct Scsi_Host *shost
if (asc_get_eeprom_string(wordp, serialstr) == ASC_TRUE)
seq_printf(m, " Serial Number: %s\n", serialstr);
else
- seq_printf(m, " Serial Number Signature Not Present.\n");
+ seq_puts(m, " Serial Number Signature Not Present.\n");
if (adv_dvc_varp->chip_type == ADV_CHIP_ASC3550)
seq_printf(m,
@@ -3209,10 +3200,10 @@ static void asc_prt_adv_board_eeprom(struct seq_file *m, struct Scsi_Host *shost
ep_38C1600->termination_lvd, termstr,
ep_38C1600->bios_ctrl);
- seq_printf(m, " Target ID: ");
+ seq_puts(m, " Target ID: ");
for (i = 0; i <= ADV_MAX_TID; i++)
seq_printf(m, " %X", i);
- seq_printf(m, "\n");
+ seq_putc(m, '\n');
if (adv_dvc_varp->chip_type == ADV_CHIP_ASC3550) {
word = ep_3550->disc_enable;
@@ -3221,11 +3212,11 @@ static void asc_prt_adv_board_eeprom(struct seq_file *m, struct Scsi_Host *shost
} else {
word = ep_38C1600->disc_enable;
}
- seq_printf(m, " Disconnects: ");
+ seq_puts(m, " Disconnects: ");
for (i = 0; i <= ADV_MAX_TID; i++)
seq_printf(m, " %c",
(word & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N');
- seq_printf(m, "\n");
+ seq_putc(m, '\n');
if (adv_dvc_varp->chip_type == ADV_CHIP_ASC3550) {
word = ep_3550->tagqng_able;
@@ -3234,11 +3225,11 @@ static void asc_prt_adv_board_eeprom(struct seq_file *m, struct Scsi_Host *shost
} else {
word = ep_38C1600->tagqng_able;
}
- seq_printf(m, " Command Queuing: ");
+ seq_puts(m, " Command Queuing: ");
for (i = 0; i <= ADV_MAX_TID; i++)
seq_printf(m, " %c",
(word & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N');
- seq_printf(m, "\n");
+ seq_putc(m, '\n');
if (adv_dvc_varp->chip_type == ADV_CHIP_ASC3550) {
word = ep_3550->start_motor;
@@ -3247,28 +3238,28 @@ static void asc_prt_adv_board_eeprom(struct seq_file *m, struct Scsi_Host *shost
} else {
word = ep_38C1600->start_motor;
}
- seq_printf(m, " Start Motor: ");
+ seq_puts(m, " Start Motor: ");
for (i = 0; i <= ADV_MAX_TID; i++)
seq_printf(m, " %c",
(word & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N');
- seq_printf(m, "\n");
+ seq_putc(m, '\n');
if (adv_dvc_varp->chip_type == ADV_CHIP_ASC3550) {
- seq_printf(m, " Synchronous Transfer:");
+ seq_puts(m, " Synchronous Transfer:");
for (i = 0; i <= ADV_MAX_TID; i++)
seq_printf(m, " %c",
(ep_3550->sdtr_able & ADV_TID_TO_TIDMASK(i)) ?
'Y' : 'N');
- seq_printf(m, "\n");
+ seq_putc(m, '\n');
}
if (adv_dvc_varp->chip_type == ADV_CHIP_ASC3550) {
- seq_printf(m, " Ultra Transfer: ");
+ seq_puts(m, " Ultra Transfer: ");
for (i = 0; i <= ADV_MAX_TID; i++)
seq_printf(m, " %c",
(ep_3550->ultra_able & ADV_TID_TO_TIDMASK(i))
? 'Y' : 'N');
- seq_printf(m, "\n");
+ seq_putc(m, '\n');
}
if (adv_dvc_varp->chip_type == ADV_CHIP_ASC3550) {
@@ -3278,16 +3269,15 @@ static void asc_prt_adv_board_eeprom(struct seq_file *m, struct Scsi_Host *shost
} else {
word = ep_38C1600->wdtr_able;
}
- seq_printf(m, " Wide Transfer: ");
+ seq_puts(m, " Wide Transfer: ");
for (i = 0; i <= ADV_MAX_TID; i++)
seq_printf(m, " %c",
(word & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N');
- seq_printf(m, "\n");
+ seq_putc(m, '\n');
if (adv_dvc_varp->chip_type == ADV_CHIP_ASC38C0800 ||
adv_dvc_varp->chip_type == ADV_CHIP_ASC38C1600) {
- seq_printf(m,
- " Synchronous Transfer Speed (Mhz):\n ");
+ seq_puts(m, " Synchronous Transfer Speed (Mhz):\n ");
for (i = 0; i <= ADV_MAX_TID; i++) {
char *speed_str;
@@ -3325,10 +3315,10 @@ static void asc_prt_adv_board_eeprom(struct seq_file *m, struct Scsi_Host *shost
}
seq_printf(m, "%X:%s ", i, speed_str);
if (i == 7)
- seq_printf(m, "\n ");
+ seq_puts(m, "\n ");
sdtr_speed >>= 4;
}
- seq_printf(m, "\n");
+ seq_putc(m, '\n');
}
}
@@ -3403,7 +3393,7 @@ static void asc_prt_asc_board_info(struct seq_file *m, struct Scsi_Host *shost)
seq_printf(m,
" Total Command Pending: %d\n", v->cur_total_qng);
- seq_printf(m, " Command Queuing:");
+ seq_puts(m, " Command Queuing:");
for (i = 0; i <= ASC_MAX_TID; i++) {
if ((chip_scsi_id == i) ||
((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)) == 0)) {
@@ -3413,10 +3403,9 @@ static void asc_prt_asc_board_info(struct seq_file *m, struct Scsi_Host *shost)
i,
(v->use_tagged_qng & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N');
}
- seq_printf(m, "\n");
/* Current number of commands waiting for a device. */
- seq_printf(m, " Command Queue Pending:");
+ seq_puts(m, "\n Command Queue Pending:");
for (i = 0; i <= ASC_MAX_TID; i++) {
if ((chip_scsi_id == i) ||
((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)) == 0)) {
@@ -3424,10 +3413,9 @@ static void asc_prt_asc_board_info(struct seq_file *m, struct Scsi_Host *shost)
}
seq_printf(m, " %X:%u", i, v->cur_dvc_qng[i]);
}
- seq_printf(m, "\n");
/* Current limit on number of commands that can be sent to a device. */
- seq_printf(m, " Command Queue Limit:");
+ seq_puts(m, "\n Command Queue Limit:");
for (i = 0; i <= ASC_MAX_TID; i++) {
if ((chip_scsi_id == i) ||
((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)) == 0)) {
@@ -3435,10 +3423,9 @@ static void asc_prt_asc_board_info(struct seq_file *m, struct Scsi_Host *shost)
}
seq_printf(m, " %X:%u", i, v->max_dvc_qng[i]);
}
- seq_printf(m, "\n");
/* Indicate whether the device has returned queue full status. */
- seq_printf(m, " Command Queue Full:");
+ seq_puts(m, "\n Command Queue Full:");
for (i = 0; i <= ASC_MAX_TID; i++) {
if ((chip_scsi_id == i) ||
((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)) == 0)) {
@@ -3450,9 +3437,8 @@ static void asc_prt_asc_board_info(struct seq_file *m, struct Scsi_Host *shost)
else
seq_printf(m, " %X:N", i);
}
- seq_printf(m, "\n");
- seq_printf(m, " Synchronous Transfer:");
+ seq_puts(m, "\n Synchronous Transfer:");
for (i = 0; i <= ASC_MAX_TID; i++) {
if ((chip_scsi_id == i) ||
((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)) == 0)) {
@@ -3462,7 +3448,7 @@ static void asc_prt_asc_board_info(struct seq_file *m, struct Scsi_Host *shost)
i,
(v->sdtr_done & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N');
}
- seq_printf(m, "\n");
+ seq_putc(m, '\n');
for (i = 0; i <= ASC_MAX_TID; i++) {
uchar syn_period_ix;
@@ -3476,7 +3462,7 @@ static void asc_prt_asc_board_info(struct seq_file *m, struct Scsi_Host *shost)
seq_printf(m, " %X:", i);
if ((boardp->sdtr_data[i] & ASC_SYN_MAX_OFFSET) == 0) {
- seq_printf(m, " Asynchronous");
+ seq_puts(m, " Asynchronous");
} else {
syn_period_ix =
(boardp->sdtr_data[i] >> 4) & (v->max_sdtr_index -
@@ -3494,16 +3480,15 @@ static void asc_prt_asc_board_info(struct seq_file *m, struct Scsi_Host *shost)
}
if ((v->sdtr_done & ADV_TID_TO_TIDMASK(i)) == 0) {
- seq_printf(m, "*\n");
+ seq_puts(m, "*\n");
renegotiate = 1;
} else {
- seq_printf(m, "\n");
+ seq_putc(m, '\n');
}
}
if (renegotiate) {
- seq_printf(m,
- " * = Re-negotiation pending before next command.\n");
+ seq_puts(m, " * = Re-negotiation pending before next command.\n");
}
}
@@ -3548,7 +3533,7 @@ static void asc_prt_adv_board_info(struct seq_file *m, struct Scsi_Host *shost)
c->mcode_date, c->mcode_version);
AdvReadWordLram(iop_base, ASC_MC_TAGQNG_ABLE, tagqng_able);
- seq_printf(m, " Queuing Enabled:");
+ seq_puts(m, " Queuing Enabled:");
for (i = 0; i <= ADV_MAX_TID; i++) {
if ((chip_scsi_id == i) ||
((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)) == 0)) {
@@ -3559,9 +3544,8 @@ static void asc_prt_adv_board_info(struct seq_file *m, struct Scsi_Host *shost)
i,
(tagqng_able & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N');
}
- seq_printf(m, "\n");
- seq_printf(m, " Queue Limit:");
+ seq_puts(m, "\n Queue Limit:");
for (i = 0; i <= ADV_MAX_TID; i++) {
if ((chip_scsi_id == i) ||
((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)) == 0)) {
@@ -3573,9 +3557,8 @@ static void asc_prt_adv_board_info(struct seq_file *m, struct Scsi_Host *shost)
seq_printf(m, " %X:%d", i, lrambyte);
}
- seq_printf(m, "\n");
- seq_printf(m, " Command Pending:");
+ seq_puts(m, "\n Command Pending:");
for (i = 0; i <= ADV_MAX_TID; i++) {
if ((chip_scsi_id == i) ||
((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)) == 0)) {
@@ -3587,10 +3570,10 @@ static void asc_prt_adv_board_info(struct seq_file *m, struct Scsi_Host *shost)
seq_printf(m, " %X:%d", i, lrambyte);
}
- seq_printf(m, "\n");
+ seq_putc(m, '\n');
AdvReadWordLram(iop_base, ASC_MC_WDTR_ABLE, wdtr_able);
- seq_printf(m, " Wide Enabled:");
+ seq_puts(m, " Wide Enabled:");
for (i = 0; i <= ADV_MAX_TID; i++) {
if ((chip_scsi_id == i) ||
((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)) == 0)) {
@@ -3601,10 +3584,10 @@ static void asc_prt_adv_board_info(struct seq_file *m, struct Scsi_Host *shost)
i,
(wdtr_able & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N');
}
- seq_printf(m, "\n");
+ seq_putc(m, '\n');
AdvReadWordLram(iop_base, ASC_MC_WDTR_DONE, wdtr_done);
- seq_printf(m, " Transfer Bit Width:");
+ seq_puts(m, " Transfer Bit Width:");
for (i = 0; i <= ADV_MAX_TID; i++) {
if ((chip_scsi_id == i) ||
((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)) == 0)) {
@@ -3620,14 +3603,14 @@ static void asc_prt_adv_board_info(struct seq_file *m, struct Scsi_Host *shost)
if ((wdtr_able & ADV_TID_TO_TIDMASK(i)) &&
(wdtr_done & ADV_TID_TO_TIDMASK(i)) == 0) {
- seq_printf(m, "*");
+ seq_putc(m, '*');
renegotiate = 1;
}
}
- seq_printf(m, "\n");
+ seq_putc(m, '\n');
AdvReadWordLram(iop_base, ASC_MC_SDTR_ABLE, sdtr_able);
- seq_printf(m, " Synchronous Enabled:");
+ seq_puts(m, " Synchronous Enabled:");
for (i = 0; i <= ADV_MAX_TID; i++) {
if ((chip_scsi_id == i) ||
((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)) == 0)) {
@@ -3638,7 +3621,7 @@ static void asc_prt_adv_board_info(struct seq_file *m, struct Scsi_Host *shost)
i,
(sdtr_able & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N');
}
- seq_printf(m, "\n");
+ seq_putc(m, '\n');
AdvReadWordLram(iop_base, ASC_MC_SDTR_DONE, sdtr_done);
for (i = 0; i <= ADV_MAX_TID; i++) {
@@ -3657,14 +3640,14 @@ static void asc_prt_adv_board_info(struct seq_file *m, struct Scsi_Host *shost)
seq_printf(m, " %X:", i);
if ((lramword & 0x1F) == 0) { /* Check for REQ/ACK Offset 0. */
- seq_printf(m, " Asynchronous");
+ seq_puts(m, " Asynchronous");
} else {
- seq_printf(m, " Transfer Period Factor: ");
+ seq_puts(m, " Transfer Period Factor: ");
if ((lramword & 0x1F00) == 0x1100) { /* 80 Mhz */
- seq_printf(m, "9 (80.0 Mhz),");
+ seq_puts(m, "9 (80.0 Mhz),");
} else if ((lramword & 0x1F00) == 0x1000) { /* 40 Mhz */
- seq_printf(m, "10 (40.0 Mhz),");
+ seq_puts(m, "10 (40.0 Mhz),");
} else { /* 20 Mhz or below. */
period = (((lramword >> 8) * 25) + 50) / 4;
@@ -3684,16 +3667,15 @@ static void asc_prt_adv_board_info(struct seq_file *m, struct Scsi_Host *shost)
}
if ((sdtr_done & ADV_TID_TO_TIDMASK(i)) == 0) {
- seq_printf(m, "*\n");
+ seq_puts(m, "*\n");
renegotiate = 1;
} else {
- seq_printf(m, "\n");
+ seq_putc(m, '\n');
}
}
if (renegotiate) {
- seq_printf(m,
- " * = Re-negotiation pending before next command.\n");
+ seq_puts(m, " * = Re-negotiation pending before next command.\n");
}
}
diff --git a/drivers/scsi/aha152x.c b/drivers/scsi/aha152x.c
index 2b960b326daf..e31c460a1335 100644
--- a/drivers/scsi/aha152x.c
+++ b/drivers/scsi/aha152x.c
@@ -2490,299 +2490,296 @@ static void show_queues(struct Scsi_Host *shpnt)
disp_enintr(shpnt);
}
-#undef SPRINTF
-#define SPRINTF(args...) seq_printf(m, ##args)
-
static void get_command(struct seq_file *m, Scsi_Cmnd * ptr)
{
int i;
- SPRINTF("%p: target=%d; lun=%d; cmnd=( ",
+ seq_printf(m, "%p: target=%d; lun=%d; cmnd=( ",
ptr, ptr->device->id, (u8)ptr->device->lun);
for (i = 0; i < COMMAND_SIZE(ptr->cmnd[0]); i++)
- SPRINTF("0x%02x ", ptr->cmnd[i]);
+ seq_printf(m, "0x%02x ", ptr->cmnd[i]);
- SPRINTF("); resid=%d; residual=%d; buffers=%d; phase |",
+ seq_printf(m, "); resid=%d; residual=%d; buffers=%d; phase |",
scsi_get_resid(ptr), ptr->SCp.this_residual,
ptr->SCp.buffers_residual);
if (ptr->SCp.phase & not_issued)
- SPRINTF("not issued|");
+ seq_puts(m, "not issued|");
if (ptr->SCp.phase & selecting)
- SPRINTF("selecting|");
+ seq_puts(m, "selecting|");
if (ptr->SCp.phase & disconnected)
- SPRINTF("disconnected|");
+ seq_puts(m, "disconnected|");
if (ptr->SCp.phase & aborted)
- SPRINTF("aborted|");
+ seq_puts(m, "aborted|");
if (ptr->SCp.phase & identified)
- SPRINTF("identified|");
+ seq_puts(m, "identified|");
if (ptr->SCp.phase & completed)
- SPRINTF("completed|");
+ seq_puts(m, "completed|");
if (ptr->SCp.phase & spiordy)
- SPRINTF("spiordy|");
+ seq_puts(m, "spiordy|");
if (ptr->SCp.phase & syncneg)
- SPRINTF("syncneg|");
- SPRINTF("; next=0x%p\n", SCNEXT(ptr));
+ seq_puts(m, "syncneg|");
+ seq_printf(m, "; next=0x%p\n", SCNEXT(ptr));
}
static void get_ports(struct seq_file *m, struct Scsi_Host *shpnt)
{
int s;
- SPRINTF("\n%s: %s(%s) ", CURRENT_SC ? "on bus" : "waiting", states[STATE].name, states[PREVSTATE].name);
+ seq_printf(m, "\n%s: %s(%s) ", CURRENT_SC ? "on bus" : "waiting", states[STATE].name, states[PREVSTATE].name);
s = GETPORT(SCSISEQ);
- SPRINTF("SCSISEQ( ");
+ seq_puts(m, "SCSISEQ( ");
if (s & TEMODEO)
- SPRINTF("TARGET MODE ");
+ seq_puts(m, "TARGET MODE ");
if (s & ENSELO)
- SPRINTF("SELO ");
+ seq_puts(m, "SELO ");
if (s & ENSELI)
- SPRINTF("SELI ");
+ seq_puts(m, "SELI ");
if (s & ENRESELI)
- SPRINTF("RESELI ");
+ seq_puts(m, "RESELI ");
if (s & ENAUTOATNO)
- SPRINTF("AUTOATNO ");
+ seq_puts(m, "AUTOATNO ");
if (s & ENAUTOATNI)
- SPRINTF("AUTOATNI ");
+ seq_puts(m, "AUTOATNI ");
if (s & ENAUTOATNP)
- SPRINTF("AUTOATNP ");
+ seq_puts(m, "AUTOATNP ");
if (s & SCSIRSTO)
- SPRINTF("SCSIRSTO ");
- SPRINTF(");");
+ seq_puts(m, "SCSIRSTO ");
+ seq_puts(m, ");");
- SPRINTF(" SCSISIG(");
+ seq_puts(m, " SCSISIG(");
s = GETPORT(SCSISIG);
switch (s & P_MASK) {
case P_DATAO:
- SPRINTF("DATA OUT");
+ seq_puts(m, "DATA OUT");
break;
case P_DATAI:
- SPRINTF("DATA IN");
+ seq_puts(m, "DATA IN");
break;
case P_CMD:
- SPRINTF("COMMAND");
+ seq_puts(m, "COMMAND");
break;
case P_STATUS:
- SPRINTF("STATUS");
+ seq_puts(m, "STATUS");
break;
case P_MSGO:
- SPRINTF("MESSAGE OUT");
+ seq_puts(m, "MESSAGE OUT");
break;
case P_MSGI:
- SPRINTF("MESSAGE IN");
+ seq_puts(m, "MESSAGE IN");
break;
default:
- SPRINTF("*invalid*");
+ seq_puts(m, "*invalid*");
break;
}
- SPRINTF("); ");
+ seq_puts(m, "); ");
- SPRINTF("INTSTAT (%s); ", TESTHI(DMASTAT, INTSTAT) ? "hi" : "lo");
+ seq_printf(m, "INTSTAT (%s); ", TESTHI(DMASTAT, INTSTAT) ? "hi" : "lo");
- SPRINTF("SSTAT( ");
+ seq_puts(m, "SSTAT( ");
s = GETPORT(SSTAT0);
if (s & TARGET)
- SPRINTF("TARGET ");
+ seq_puts(m, "TARGET ");
if (s & SELDO)
- SPRINTF("SELDO ");
+ seq_puts(m, "SELDO ");
if (s & SELDI)
- SPRINTF("SELDI ");
+ seq_puts(m, "SELDI ");
if (s & SELINGO)
- SPRINTF("SELINGO ");
+ seq_puts(m, "SELINGO ");
if (s & SWRAP)
- SPRINTF("SWRAP ");
+ seq_puts(m, "SWRAP ");
if (s & SDONE)
- SPRINTF("SDONE ");
+ seq_puts(m, "SDONE ");
if (s & SPIORDY)
- SPRINTF("SPIORDY ");
+ seq_puts(m, "SPIORDY ");
if (s & DMADONE)
- SPRINTF("DMADONE ");
+ seq_puts(m, "DMADONE ");
s = GETPORT(SSTAT1);
if (s & SELTO)
- SPRINTF("SELTO ");
+ seq_puts(m, "SELTO ");
if (s & ATNTARG)
- SPRINTF("ATNTARG ");
+ seq_puts(m, "ATNTARG ");
if (s & SCSIRSTI)
- SPRINTF("SCSIRSTI ");
+ seq_puts(m, "SCSIRSTI ");
if (s & PHASEMIS)
- SPRINTF("PHASEMIS ");
+ seq_puts(m, "PHASEMIS ");
if (s & BUSFREE)
- SPRINTF("BUSFREE ");
+ seq_puts(m, "BUSFREE ");
if (s & SCSIPERR)
- SPRINTF("SCSIPERR ");
+ seq_puts(m, "SCSIPERR ");
if (s & PHASECHG)
- SPRINTF("PHASECHG ");
+ seq_puts(m, "PHASECHG ");
if (s & REQINIT)
- SPRINTF("REQINIT ");
- SPRINTF("); ");
+ seq_puts(m, "REQINIT ");
+ seq_puts(m, "); ");
- SPRINTF("SSTAT( ");
+ seq_puts(m, "SSTAT( ");
s = GETPORT(SSTAT0) & GETPORT(SIMODE0);
if (s & TARGET)
- SPRINTF("TARGET ");
+ seq_puts(m, "TARGET ");
if (s & SELDO)
- SPRINTF("SELDO ");
+ seq_puts(m, "SELDO ");
if (s & SELDI)
- SPRINTF("SELDI ");
+ seq_puts(m, "SELDI ");
if (s & SELINGO)
- SPRINTF("SELINGO ");
+ seq_puts(m, "SELINGO ");
if (s & SWRAP)
- SPRINTF("SWRAP ");
+ seq_puts(m, "SWRAP ");
if (s & SDONE)
- SPRINTF("SDONE ");
+ seq_puts(m, "SDONE ");
if (s & SPIORDY)
- SPRINTF("SPIORDY ");
+ seq_puts(m, "SPIORDY ");
if (s & DMADONE)
- SPRINTF("DMADONE ");
+ seq_puts(m, "DMADONE ");
s = GETPORT(SSTAT1) & GETPORT(SIMODE1);
if (s & SELTO)
- SPRINTF("SELTO ");
+ seq_puts(m, "SELTO ");
if (s & ATNTARG)
- SPRINTF("ATNTARG ");
+ seq_puts(m, "ATNTARG ");
if (s & SCSIRSTI)
- SPRINTF("SCSIRSTI ");
+ seq_puts(m, "SCSIRSTI ");
if (s & PHASEMIS)
- SPRINTF("PHASEMIS ");
+ seq_puts(m, "PHASEMIS ");
if (s & BUSFREE)
- SPRINTF("BUSFREE ");
+ seq_puts(m, "BUSFREE ");
if (s & SCSIPERR)
- SPRINTF("SCSIPERR ");
+ seq_puts(m, "SCSIPERR ");
if (s & PHASECHG)
- SPRINTF("PHASECHG ");
+ seq_puts(m, "PHASECHG ");
if (s & REQINIT)
- SPRINTF("REQINIT ");
- SPRINTF("); ");
+ seq_puts(m, "REQINIT ");
+ seq_puts(m, "); ");
- SPRINTF("SXFRCTL0( ");
+ seq_puts(m, "SXFRCTL0( ");
s = GETPORT(SXFRCTL0);
if (s & SCSIEN)
- SPRINTF("SCSIEN ");
+ seq_puts(m, "SCSIEN ");
if (s & DMAEN)
- SPRINTF("DMAEN ");
+ seq_puts(m, "DMAEN ");
if (s & CH1)
- SPRINTF("CH1 ");
+ seq_puts(m, "CH1 ");
if (s & CLRSTCNT)
- SPRINTF("CLRSTCNT ");
+ seq_puts(m, "CLRSTCNT ");
if (s & SPIOEN)
- SPRINTF("SPIOEN ");
+ seq_puts(m, "SPIOEN ");
if (s & CLRCH1)
- SPRINTF("CLRCH1 ");
- SPRINTF("); ");
+ seq_puts(m, "CLRCH1 ");
+ seq_puts(m, "); ");
- SPRINTF("SIGNAL( ");
+ seq_puts(m, "SIGNAL( ");
s = GETPORT(SCSISIG);
if (s & SIG_ATNI)
- SPRINTF("ATNI ");
+ seq_puts(m, "ATNI ");
if (s & SIG_SELI)
- SPRINTF("SELI ");
+ seq_puts(m, "SELI ");
if (s & SIG_BSYI)
- SPRINTF("BSYI ");
+ seq_puts(m, "BSYI ");
if (s & SIG_REQI)
- SPRINTF("REQI ");
+ seq_puts(m, "REQI ");
if (s & SIG_ACKI)
- SPRINTF("ACKI ");
- SPRINTF("); ");
+ seq_puts(m, "ACKI ");
+ seq_puts(m, "); ");
- SPRINTF("SELID(%02x), ", GETPORT(SELID));
+ seq_printf(m, "SELID(%02x), ", GETPORT(SELID));
- SPRINTF("STCNT(%d), ", GETSTCNT());
+ seq_printf(m, "STCNT(%d), ", GETSTCNT());
- SPRINTF("SSTAT2( ");
+ seq_puts(m, "SSTAT2( ");
s = GETPORT(SSTAT2);
if (s & SOFFSET)
- SPRINTF("SOFFSET ");
+ seq_puts(m, "SOFFSET ");
if (s & SEMPTY)
- SPRINTF("SEMPTY ");
+ seq_puts(m, "SEMPTY ");
if (s & SFULL)
- SPRINTF("SFULL ");
- SPRINTF("); SFCNT (%d); ", s & (SFULL | SFCNT));
+ seq_puts(m, "SFULL ");
+ seq_printf(m, "); SFCNT (%d); ", s & (SFULL | SFCNT));
s = GETPORT(SSTAT3);
- SPRINTF("SCSICNT (%d), OFFCNT(%d), ", (s & 0xf0) >> 4, s & 0x0f);
+ seq_printf(m, "SCSICNT (%d), OFFCNT(%d), ", (s & 0xf0) >> 4, s & 0x0f);
- SPRINTF("SSTAT4( ");
+ seq_puts(m, "SSTAT4( ");
s = GETPORT(SSTAT4);
if (s & SYNCERR)
- SPRINTF("SYNCERR ");
+ seq_puts(m, "SYNCERR ");
if (s & FWERR)
- SPRINTF("FWERR ");
+ seq_puts(m, "FWERR ");
if (s & FRERR)
- SPRINTF("FRERR ");
- SPRINTF("); ");
+ seq_puts(m, "FRERR ");
+ seq_puts(m, "); ");
- SPRINTF("DMACNTRL0( ");
+ seq_puts(m, "DMACNTRL0( ");
s = GETPORT(DMACNTRL0);
- SPRINTF("%s ", s & _8BIT ? "8BIT" : "16BIT");
- SPRINTF("%s ", s & DMA ? "DMA" : "PIO");
- SPRINTF("%s ", s & WRITE_READ ? "WRITE" : "READ");
+ seq_printf(m, "%s ", s & _8BIT ? "8BIT" : "16BIT");
+ seq_printf(m, "%s ", s & DMA ? "DMA" : "PIO");
+ seq_printf(m, "%s ", s & WRITE_READ ? "WRITE" : "READ");
if (s & ENDMA)
- SPRINTF("ENDMA ");
+ seq_puts(m, "ENDMA ");
if (s & INTEN)
- SPRINTF("INTEN ");
+ seq_puts(m, "INTEN ");
if (s & RSTFIFO)
- SPRINTF("RSTFIFO ");
+ seq_puts(m, "RSTFIFO ");
if (s & SWINT)
- SPRINTF("SWINT ");
- SPRINTF("); ");
+ seq_puts(m, "SWINT ");
+ seq_puts(m, "); ");
- SPRINTF("DMASTAT( ");
+ seq_puts(m, "DMASTAT( ");
s = GETPORT(DMASTAT);
if (s & ATDONE)
- SPRINTF("ATDONE ");
+ seq_puts(m, "ATDONE ");
if (s & WORDRDY)
- SPRINTF("WORDRDY ");
+ seq_puts(m, "WORDRDY ");
if (s & DFIFOFULL)
- SPRINTF("DFIFOFULL ");
+ seq_puts(m, "DFIFOFULL ");
if (s & DFIFOEMP)
- SPRINTF("DFIFOEMP ");
- SPRINTF(")\n");
+ seq_puts(m, "DFIFOEMP ");
+ seq_puts(m, ")\n");
- SPRINTF("enabled interrupts( ");
+ seq_puts(m, "enabled interrupts( ");
s = GETPORT(SIMODE0);
if (s & ENSELDO)
- SPRINTF("ENSELDO ");
+ seq_puts(m, "ENSELDO ");
if (s & ENSELDI)
- SPRINTF("ENSELDI ");
+ seq_puts(m, "ENSELDI ");
if (s & ENSELINGO)
- SPRINTF("ENSELINGO ");
+ seq_puts(m, "ENSELINGO ");
if (s & ENSWRAP)
- SPRINTF("ENSWRAP ");
+ seq_puts(m, "ENSWRAP ");
if (s & ENSDONE)
- SPRINTF("ENSDONE ");
+ seq_puts(m, "ENSDONE ");
if (s & ENSPIORDY)
- SPRINTF("ENSPIORDY ");
+ seq_puts(m, "ENSPIORDY ");
if (s & ENDMADONE)
- SPRINTF("ENDMADONE ");
+ seq_puts(m, "ENDMADONE ");
s = GETPORT(SIMODE1);
if (s & ENSELTIMO)
- SPRINTF("ENSELTIMO ");
+ seq_puts(m, "ENSELTIMO ");
if (s & ENATNTARG)
- SPRINTF("ENATNTARG ");
+ seq_puts(m, "ENATNTARG ");
if (s & ENPHASEMIS)
- SPRINTF("ENPHASEMIS ");
+ seq_puts(m, "ENPHASEMIS ");
if (s & ENBUSFREE)
- SPRINTF("ENBUSFREE ");
+ seq_puts(m, "ENBUSFREE ");
if (s & ENSCSIPERR)
- SPRINTF("ENSCSIPERR ");
+ seq_puts(m, "ENSCSIPERR ");
if (s & ENPHASECHG)
- SPRINTF("ENPHASECHG ");
+ seq_puts(m, "ENPHASECHG ");
if (s & ENREQINIT)
- SPRINTF("ENREQINIT ");
- SPRINTF(")\n");
+ seq_puts(m, "ENREQINIT ");
+ seq_puts(m, ")\n");
}
static int aha152x_set_info(struct Scsi_Host *shpnt, char *buffer, int length)
@@ -2825,56 +2822,56 @@ static int aha152x_show_info(struct seq_file *m, struct Scsi_Host *shpnt)
Scsi_Cmnd *ptr;
unsigned long flags;
- SPRINTF(AHA152X_REVID "\n");
+ seq_puts(m, AHA152X_REVID "\n");
- SPRINTF("ioports 0x%04lx to 0x%04lx\n",
+ seq_printf(m, "ioports 0x%04lx to 0x%04lx\n",
shpnt->io_port, shpnt->io_port + shpnt->n_io_port - 1);
- SPRINTF("interrupt 0x%02x\n", shpnt->irq);
- SPRINTF("disconnection/reconnection %s\n",
+ seq_printf(m, "interrupt 0x%02x\n", shpnt->irq);
+ seq_printf(m, "disconnection/reconnection %s\n",
RECONNECT ? "enabled" : "disabled");
- SPRINTF("parity checking %s\n",
+ seq_printf(m, "parity checking %s\n",
PARITY ? "enabled" : "disabled");
- SPRINTF("synchronous transfers %s\n",
+ seq_printf(m, "synchronous transfers %s\n",
SYNCHRONOUS ? "enabled" : "disabled");
- SPRINTF("%d commands currently queued\n", HOSTDATA(shpnt)->commands);
+ seq_printf(m, "%d commands currently queued\n", HOSTDATA(shpnt)->commands);
if(SYNCHRONOUS) {
- SPRINTF("synchronously operating targets (tick=50 ns):\n");
+ seq_puts(m, "synchronously operating targets (tick=50 ns):\n");
for (i = 0; i < 8; i++)
if (HOSTDATA(shpnt)->syncrate[i] & 0x7f)
- SPRINTF("target %d: period %dT/%dns; req/ack offset %d\n",
+ seq_printf(m, "target %d: period %dT/%dns; req/ack offset %d\n",
i,
(((HOSTDATA(shpnt)->syncrate[i] & 0x70) >> 4) + 2),
(((HOSTDATA(shpnt)->syncrate[i] & 0x70) >> 4) + 2) * 50,
HOSTDATA(shpnt)->syncrate[i] & 0x0f);
}
- SPRINTF("\nqueue status:\n");
+ seq_puts(m, "\nqueue status:\n");
DO_LOCK(flags);
if (ISSUE_SC) {
- SPRINTF("not yet issued commands:\n");
+ seq_puts(m, "not yet issued commands:\n");
for (ptr = ISSUE_SC; ptr; ptr = SCNEXT(ptr))
get_command(m, ptr);
} else
- SPRINTF("no not yet issued commands\n");
+ seq_puts(m, "no not yet issued commands\n");
DO_UNLOCK(flags);
if (CURRENT_SC) {
- SPRINTF("current command:\n");
+ seq_puts(m, "current command:\n");
get_command(m, CURRENT_SC);
} else
- SPRINTF("no current command\n");
+ seq_puts(m, "no current command\n");
if (DISCONNECTED_SC) {
- SPRINTF("disconnected commands:\n");
+ seq_puts(m, "disconnected commands:\n");
for (ptr = DISCONNECTED_SC; ptr; ptr = SCNEXT(ptr))
get_command(m, ptr);
} else
- SPRINTF("no disconnected commands\n");
+ seq_puts(m, "no disconnected commands\n");
get_ports(m, shpnt);
#if defined(AHA152X_STAT)
- SPRINTF("statistics:\n"
+ seq_printf(m, "statistics:\n"
"total commands: %d\n"
"disconnections: %d\n"
"busfree with check condition: %d\n"
@@ -2894,7 +2891,7 @@ static int aha152x_show_info(struct seq_file *m, struct Scsi_Host *shpnt)
HOSTDATA(shpnt)->busfree_without_done_command,
HOSTDATA(shpnt)->busfree_without_any_action);
for(i=0; i<maxstate; i++) {
- SPRINTF("%-10s %-12d %-12d %-12ld\n",
+ seq_printf(m, "%-10s %-12d %-12d %-12ld\n",
states[i].name,
HOSTDATA(shpnt)->count_trans[i],
HOSTDATA(shpnt)->count[i],
diff --git a/drivers/scsi/aic7xxx/aic79xx_proc.c b/drivers/scsi/aic7xxx/aic79xx_proc.c
index 27dbfccea774..add2da581d66 100644
--- a/drivers/scsi/aic7xxx/aic79xx_proc.c
+++ b/drivers/scsi/aic7xxx/aic79xx_proc.c
@@ -97,7 +97,7 @@ ahd_format_transinfo(struct seq_file *m, struct ahd_transinfo *tinfo)
u_int mb;
if (tinfo->period == AHD_PERIOD_UNKNOWN) {
- seq_printf(m, "Renegotiation Pending\n");
+ seq_puts(m, "Renegotiation Pending\n");
return;
}
speed = 3300;
@@ -119,40 +119,38 @@ ahd_format_transinfo(struct seq_file *m, struct ahd_transinfo *tinfo)
printed_options = 0;
seq_printf(m, " (%d.%03dMHz", freq / 1000, freq % 1000);
if ((tinfo->ppr_options & MSG_EXT_PPR_RD_STRM) != 0) {
- seq_printf(m, " RDSTRM");
+ seq_puts(m, " RDSTRM");
printed_options++;
}
if ((tinfo->ppr_options & MSG_EXT_PPR_DT_REQ) != 0) {
- seq_printf(m, "%s", printed_options ? "|DT" : " DT");
+ seq_puts(m, printed_options ? "|DT" : " DT");
printed_options++;
}
if ((tinfo->ppr_options & MSG_EXT_PPR_IU_REQ) != 0) {
- seq_printf(m, "%s", printed_options ? "|IU" : " IU");
+ seq_puts(m, printed_options ? "|IU" : " IU");
printed_options++;
}
if ((tinfo->ppr_options & MSG_EXT_PPR_RTI) != 0) {
- seq_printf(m, "%s",
- printed_options ? "|RTI" : " RTI");
+ seq_puts(m, printed_options ? "|RTI" : " RTI");
printed_options++;
}
if ((tinfo->ppr_options & MSG_EXT_PPR_QAS_REQ) != 0) {
- seq_printf(m, "%s",
- printed_options ? "|QAS" : " QAS");
+ seq_puts(m, printed_options ? "|QAS" : " QAS");
printed_options++;
}
}
if (tinfo->width > 0) {
if (freq != 0) {
- seq_printf(m, ", ");
+ seq_puts(m, ", ");
} else {
- seq_printf(m, " (");
+ seq_puts(m, " (");
}
seq_printf(m, "%dbit)", 8 * (0x01 << tinfo->width));
} else if (freq != 0) {
- seq_printf(m, ")");
+ seq_putc(m, ')');
}
- seq_printf(m, "\n");
+ seq_putc(m, '\n');
}
static void
@@ -167,15 +165,15 @@ ahd_dump_target_state(struct ahd_softc *ahd, struct seq_file *m,
tinfo = ahd_fetch_transinfo(ahd, channel, our_id,
target_id, &tstate);
seq_printf(m, "Target %d Negotiation Settings\n", target_id);
- seq_printf(m, "\tUser: ");
+ seq_puts(m, "\tUser: ");
ahd_format_transinfo(m, &tinfo->user);
starget = ahd->platform_data->starget[target_id];
if (starget == NULL)
return;
- seq_printf(m, "\tGoal: ");
+ seq_puts(m, "\tGoal: ");
ahd_format_transinfo(m, &tinfo->goal);
- seq_printf(m, "\tCurr: ");
+ seq_puts(m, "\tCurr: ");
ahd_format_transinfo(m, &tinfo->curr);
for (lun = 0; lun < AHD_NUM_LUNS; lun++) {
@@ -291,19 +289,19 @@ ahd_linux_show_info(struct seq_file *m, struct Scsi_Host *shost)
max_targ = 16;
if (ahd->seep_config == NULL)
- seq_printf(m, "No Serial EEPROM\n");
+ seq_puts(m, "No Serial EEPROM\n");
else {
- seq_printf(m, "Serial EEPROM:\n");
+ seq_puts(m, "Serial EEPROM:\n");
for (i = 0; i < sizeof(*ahd->seep_config)/2; i++) {
if (((i % 8) == 0) && (i != 0)) {
- seq_printf(m, "\n");
+ seq_putc(m, '\n');
}
seq_printf(m, "0x%.4x ",
((uint16_t*)ahd->seep_config)[i]);
}
- seq_printf(m, "\n");
+ seq_putc(m, '\n');
}
- seq_printf(m, "\n");
+ seq_putc(m, '\n');
if ((ahd->features & AHD_WIDE) == 0)
max_targ = 8;
diff --git a/drivers/scsi/aic7xxx/aic7xxx_proc.c b/drivers/scsi/aic7xxx/aic7xxx_proc.c
index 64eec6c07a83..18459605d991 100644
--- a/drivers/scsi/aic7xxx/aic7xxx_proc.c
+++ b/drivers/scsi/aic7xxx/aic7xxx_proc.c
@@ -119,15 +119,15 @@ ahc_format_transinfo(struct seq_file *m, struct ahc_transinfo *tinfo)
if (tinfo->width > 0) {
if (freq != 0) {
- seq_printf(m, ", ");
+ seq_puts(m, ", ");
} else {
- seq_printf(m, " (");
+ seq_puts(m, " (");
}
seq_printf(m, "%dbit)", 8 * (0x01 << tinfo->width));
} else if (freq != 0) {
- seq_printf(m, ")");
+ seq_putc(m, ')');
}
- seq_printf(m, "\n");
+ seq_putc(m, '\n');
}
static void
@@ -145,15 +145,15 @@ ahc_dump_target_state(struct ahc_softc *ahc, struct seq_file *m,
if ((ahc->features & AHC_TWIN) != 0)
seq_printf(m, "Channel %c ", channel);
seq_printf(m, "Target %d Negotiation Settings\n", target_id);
- seq_printf(m, "\tUser: ");
+ seq_puts(m, "\tUser: ");
ahc_format_transinfo(m, &tinfo->user);
starget = ahc->platform_data->starget[target_offset];
if (!starget)
return;
- seq_printf(m, "\tGoal: ");
+ seq_puts(m, "\tGoal: ");
ahc_format_transinfo(m, &tinfo->goal);
- seq_printf(m, "\tCurr: ");
+ seq_puts(m, "\tCurr: ");
ahc_format_transinfo(m, &tinfo->curr);
for (lun = 0; lun < AHC_NUM_LUNS; lun++) {
@@ -303,19 +303,19 @@ ahc_linux_show_info(struct seq_file *m, struct Scsi_Host *shost)
if (ahc->seep_config == NULL)
- seq_printf(m, "No Serial EEPROM\n");
+ seq_puts(m, "No Serial EEPROM\n");
else {
- seq_printf(m, "Serial EEPROM:\n");
+ seq_puts(m, "Serial EEPROM:\n");
for (i = 0; i < sizeof(*ahc->seep_config)/2; i++) {
if (((i % 8) == 0) && (i != 0)) {
- seq_printf(m, "\n");
+ seq_putc(m, '\n');
}
seq_printf(m, "0x%.4x ",
((uint16_t*)ahc->seep_config)[i]);
}
- seq_printf(m, "\n");
+ seq_putc(m, '\n');
}
- seq_printf(m, "\n");
+ seq_putc(m, '\n');
max_targ = 16;
if ((ahc->features & (AHC_WIDE|AHC_TWIN)) == 0)
diff --git a/drivers/scsi/arm/fas216.c b/drivers/scsi/arm/fas216.c
index e64c3af7c1a0..decdc71b6b86 100644
--- a/drivers/scsi/arm/fas216.c
+++ b/drivers/scsi/arm/fas216.c
@@ -2990,7 +2990,7 @@ void fas216_print_devices(FAS216_Info *info, struct seq_file *m)
struct fas216_device *dev;
struct scsi_device *scd;
- seq_printf(m, "Device/Lun TaggedQ Parity Sync\n");
+ seq_puts(m, "Device/Lun TaggedQ Parity Sync\n");
shost_for_each_device(scd, info->host) {
dev = &info->device[scd->id];
@@ -3000,7 +3000,7 @@ void fas216_print_devices(FAS216_Info *info, struct seq_file *m)
scd->simple_tags ? "en" : "dis",
scd->current_tag);
else
- seq_printf(m, "unsupported ");
+ seq_puts(m, "unsupported ");
seq_printf(m, "%3sabled ", dev->parity_enabled ? "en" : "dis");
@@ -3008,7 +3008,7 @@ void fas216_print_devices(FAS216_Info *info, struct seq_file *m)
seq_printf(m, "offset %d, %d ns\n",
dev->sof, dev->period * 4);
else
- seq_printf(m, "async\n");
+ seq_puts(m, "async\n");
}
}
diff --git a/drivers/scsi/atari_NCR5380.c b/drivers/scsi/atari_NCR5380.c
index 6daed6b386d4..a70255413e7f 100644
--- a/drivers/scsi/atari_NCR5380.c
+++ b/drivers/scsi/atari_NCR5380.c
@@ -711,12 +711,12 @@ static void show_Scsi_Cmnd(struct scsi_cmnd *cmd, struct seq_file *m)
unsigned char *command;
seq_printf(m, "scsi%d: destination target %d, lun %llu\n",
H_NO(cmd), cmd->device->id, cmd->device->lun);
- seq_printf(m, " command = ");
+ seq_puts(m, " command = ");
command = cmd->cmnd;
seq_printf(m, "%2d (0x%02x)", command[0], command[0]);
for (i = 1, s = COMMAND_SIZE(command[0]); i < s; ++i)
seq_printf(m, " %02x", command[i]);
- seq_printf(m, "\n");
+ seq_putc(m, '\n');
}
static int __maybe_unused NCR5380_show_info(struct seq_file *m,
diff --git a/drivers/scsi/atp870u.c b/drivers/scsi/atp870u.c
index a795d81ef875..0836433e3a2d 100644
--- a/drivers/scsi/atp870u.c
+++ b/drivers/scsi/atp870u.c
@@ -3101,9 +3101,8 @@ static const char *atp870u_info(struct Scsi_Host *notused)
static int atp870u_show_info(struct seq_file *m, struct Scsi_Host *HBAptr)
{
- seq_printf(m, "ACARD AEC-671X Driver Version: 2.6+ac\n");
- seq_printf(m, "\n");
- seq_printf(m, "Adapter Configuration:\n");
+ seq_puts(m, "ACARD AEC-671X Driver Version: 2.6+ac\n\n"
+ "Adapter Configuration:\n");
seq_printf(m, " Base IO: %#.4lx\n", HBAptr->io_port);
seq_printf(m, " IRQ: %d\n", HBAptr->irq);
return 0;
diff --git a/drivers/scsi/ch.c b/drivers/scsi/ch.c
index 6bac8a746ee2..0045742fab7d 100644
--- a/drivers/scsi/ch.c
+++ b/drivers/scsi/ch.c
@@ -194,16 +194,10 @@ ch_do_scsi(scsi_changer *ch, unsigned char *cmd, int cmd_len,
retry:
errno = 0;
- if (debug) {
- DPRINTK("command: ");
- __scsi_print_command(cmd, cmd_len);
- }
-
result = scsi_execute_req(ch->device, cmd, direction, buffer,
buflength, &sshdr, timeout * HZ,
MAX_RETRIES, NULL);
- DPRINTK("result: 0x%x\n",result);
if (driver_byte(result) & DRIVER_SENSE) {
if (debug)
scsi_print_sense_hdr(ch->device, ch->name, &sshdr);
diff --git a/drivers/scsi/constants.c b/drivers/scsi/constants.c
index e2068a2621c4..fa09d4be2b53 100644
--- a/drivers/scsi/constants.c
+++ b/drivers/scsi/constants.c
@@ -18,14 +18,10 @@
#include <scsi/scsi_eh.h>
#include <scsi/scsi_dbg.h>
-
-
/* Commands with service actions that change the command name */
#define THIRD_PARTY_COPY_OUT 0x83
#define THIRD_PARTY_COPY_IN 0x84
-#define VENDOR_SPECIFIC_CDB 0xc0
-
struct sa_name_list {
int opcode;
const struct value_name_pair *arr;
@@ -37,7 +33,6 @@ struct value_name_pair {
const char * name;
};
-#ifdef CONFIG_SCSI_CONSTANTS
static const char * cdb_byte0_names[] = {
/* 00-03 */ "Test Unit Ready", "Rezero Unit/Rewind", NULL, "Request Sense",
/* 04-07 */ "Format Unit/Medium", "Read Block Limits", NULL,
@@ -261,28 +256,8 @@ static struct sa_name_list sa_names_arr[] = {
{0, NULL, 0},
};
-#else /* ifndef CONFIG_SCSI_CONSTANTS */
-static const char *cdb_byte0_names[0];
-
-static struct sa_name_list sa_names_arr[] = {
- {VARIABLE_LENGTH_CMD, NULL, 0},
- {MAINTENANCE_IN, NULL, 0},
- {MAINTENANCE_OUT, NULL, 0},
- {PERSISTENT_RESERVE_IN, NULL, 0},
- {PERSISTENT_RESERVE_OUT, NULL, 0},
- {SERVICE_ACTION_IN_12, NULL, 0},
- {SERVICE_ACTION_OUT_12, NULL, 0},
- {SERVICE_ACTION_BIDIRECTIONAL, NULL, 0},
- {SERVICE_ACTION_IN_16, NULL, 0},
- {SERVICE_ACTION_OUT_16, NULL, 0},
- {THIRD_PARTY_COPY_IN, NULL, 0},
- {THIRD_PARTY_COPY_OUT, NULL, 0},
- {0, NULL, 0},
-};
-#endif /* CONFIG_SCSI_CONSTANTS */
-
-static bool scsi_opcode_sa_name(int opcode, int service_action,
- const char **cdb_name, const char **sa_name)
+bool scsi_opcode_sa_name(int opcode, int service_action,
+ const char **cdb_name, const char **sa_name)
{
struct sa_name_list *sa_name_ptr;
const struct value_name_pair *arr = NULL;
@@ -315,76 +290,6 @@ static bool scsi_opcode_sa_name(int opcode, int service_action,
return true;
}
-static void print_opcode_name(const unsigned char *cdbp, size_t cdb_len)
-{
- int sa, cdb0;
- const char *cdb_name = NULL, *sa_name = NULL;
-
- cdb0 = cdbp[0];
- if (cdb0 == VARIABLE_LENGTH_CMD) {
- if (cdb_len < 10) {
- printk("short variable length command, len=%zu",
- cdb_len);
- return;
- }
- sa = (cdbp[8] << 8) + cdbp[9];
- } else
- sa = cdbp[1] & 0x1f;
-
- if (!scsi_opcode_sa_name(cdb0, sa, &cdb_name, &sa_name)) {
- if (cdb_name)
- printk("%s", cdb_name);
- else if (cdb0 >= VENDOR_SPECIFIC_CDB)
- printk("cdb[0]=0x%x (vendor)", cdb0);
- else if (cdb0 >= 0x60 && cdb0 < 0x7e)
- printk("cdb[0]=0x%x (reserved)", cdb0);
- else
- printk("cdb[0]=0x%x", cdb0);
- } else {
- if (sa_name)
- printk("%s", sa_name);
- else if (cdb_name)
- printk("%s, sa=0x%x", cdb_name, sa);
- else
- printk("cdb[0]=0x%x, sa=0x%x", cdb0, sa);
- }
-}
-
-void __scsi_print_command(const unsigned char *cdb, size_t cdb_len)
-{
- int k, len;
-
- print_opcode_name(cdb, cdb_len);
- len = scsi_command_size(cdb);
- if (cdb_len < len)
- len = cdb_len;
- /* print out all bytes in cdb */
- for (k = 0; k < len; ++k)
- printk(" %02x", cdb[k]);
- printk("\n");
-}
-EXPORT_SYMBOL(__scsi_print_command);
-
-void scsi_print_command(struct scsi_cmnd *cmd)
-{
- int k;
-
- if (cmd->cmnd == NULL)
- return;
-
- scmd_printk(KERN_INFO, cmd, "CDB: ");
- print_opcode_name(cmd->cmnd, cmd->cmd_len);
-
- /* print out all bytes in cdb */
- printk(":");
- for (k = 0; k < cmd->cmd_len; ++k)
- printk(" %02x", cmd->cmnd[k]);
- printk("\n");
-}
-EXPORT_SYMBOL(scsi_print_command);
-
-#ifdef CONFIG_SCSI_CONSTANTS
-
struct error_info {
unsigned short code12; /* 0x0302 looks better than 0x03,0x02 */
const char * text;
@@ -392,7 +297,7 @@ struct error_info {
/*
* The canonical list of T10 Additional Sense Codes is available at:
- * http://www.t10.org/lists/asc-num.txt [most recent: 20130605]
+ * http://www.t10.org/lists/asc-num.txt [most recent: 20141221]
*/
static const struct error_info additional[] =
@@ -421,6 +326,7 @@ static const struct error_info additional[] =
{0x001E, "Conflicting SA creation request"},
{0x001F, "Logical unit transitioning to another power condition"},
{0x0020, "Extended copy information available"},
+ {0x0021, "Atomic command aborted due to ACA"},
{0x0100, "No index/sector signal"},
@@ -446,6 +352,7 @@ static const struct error_info additional[] =
{0x040C, "Logical unit not accessible, target port in unavailable "
"state"},
{0x040D, "Logical unit not ready, structure check required"},
+ {0x040E, "Logical unit not ready, security session in progress"},
{0x0410, "Logical unit not ready, auxiliary memory not accessible"},
{0x0411, "Logical unit not ready, notify (enable spinup) required"},
{0x0412, "Logical unit not ready, offline"},
@@ -462,6 +369,11 @@ static const struct error_info additional[] =
{0x041C, "Logical unit not ready, additional power use not yet "
"granted"},
{0x041D, "Logical unit not ready, configuration in progress"},
+ {0x041E, "Logical unit not ready, microcode activation required"},
+ {0x041F, "Logical unit not ready, microcode download required"},
+ {0x0420, "Logical unit not ready, logical unit reset required"},
+ {0x0421, "Logical unit not ready, hard reset required"},
+ {0x0422, "Logical unit not ready, power cycle required"},
{0x0500, "Logical unit does not respond to selection"},
@@ -480,6 +392,7 @@ static const struct error_info additional[] =
{0x0902, "Focus servo failure"},
{0x0903, "Spindle servo failure"},
{0x0904, "Head select fault"},
+ {0x0905, "Vibration induced tracking error"},
{0x0A00, "Error log overflow"},
@@ -510,6 +423,7 @@ static const struct error_info additional[] =
{0x0C0D, "Write error - not enough unsolicited data"},
{0x0C0E, "Multiple write errors"},
{0x0C0F, "Defects in error window"},
+ {0x0C10, "Incomplete multiple atomic write operations"},
{0x0D00, "Error detected by third party temporary initiator"},
{0x0D01, "Third party device failure"},
@@ -635,6 +549,10 @@ static const struct error_info additional[] =
{0x2101, "Invalid element address"},
{0x2102, "Invalid address for write"},
{0x2103, "Invalid write crossing layer jump"},
+ {0x2104, "Unaligned write command"},
+ {0x2105, "Write boundary violation"},
+ {0x2106, "Attempt to read invalid data"},
+ {0x2107, "Read boundary violation"},
{0x2200, "Illegal function (use 20 00, 24 00, or 26 00)"},
@@ -691,6 +609,7 @@ static const struct error_info additional[] =
{0x2705, "Permanent write protect"},
{0x2706, "Conditional write protect"},
{0x2707, "Space allocation failed write protect"},
+ {0x2708, "Zone is read only"},
{0x2800, "Not ready to ready change, medium may have changed"},
{0x2801, "Import or export element accessed"},
@@ -743,10 +662,15 @@ static const struct error_info additional[] =
{0x2C0A, "Partition or collection contains user objects"},
{0x2C0B, "Not reserved"},
{0x2C0C, "Orwrite generation does not match"},
+ {0x2C0D, "Reset write pointer not allowed"},
+ {0x2C0E, "Zone is offline"},
{0x2D00, "Overwrite error on update in place"},
{0x2E00, "Insufficient time for operation"},
+ {0x2E01, "Command timeout before processing"},
+ {0x2E02, "Command timeout during processing"},
+ {0x2E03, "Command timeout during processing due to error recovery"},
{0x2F00, "Commands cleared by another initiator"},
{0x2F01, "Commands cleared by power loss notification"},
@@ -868,6 +792,7 @@ static const struct error_info additional[] =
{0x3F13, "iSCSI IP address removed"},
{0x3F14, "iSCSI IP address changed"},
{0x3F15, "Inspect referrals sense descriptors"},
+ {0x3F16, "Microcode has been changed without reset"},
/*
* {0x40NN, "Ram failure"},
* {0x40NN, "Diagnostic failure on component nn"},
@@ -946,6 +871,11 @@ static const struct error_info additional[] =
{0x5306, "Volume identifier missing"},
{0x5307, "Duplicate volume identifier"},
{0x5308, "Element status unknown"},
+ {0x5309, "Data transfer device error - load failed"},
+ {0x530a, "Data transfer device error - unload failed"},
+ {0x530b, "Data transfer device error - unload missing"},
+ {0x530c, "Data transfer device error - eject failed"},
+ {0x530d, "Data transfer device error - library communication failed"},
{0x5400, "Scsi to host system interface failure"},
@@ -963,6 +893,7 @@ static const struct error_info additional[] =
{0x550B, "Insufficient power for operation"},
{0x550C, "Insufficient resources to create rod"},
{0x550D, "Insufficient resources to create rod token"},
+ {0x550E, "Insufficient zone resources"},
{0x5700, "Unable to recover table-of-contents"},
@@ -1247,15 +1178,12 @@ static const char * const snstext[] = {
"Completed", /* F: command completed sense data reported,
may occur for successful command */
};
-#endif
/* Get sense key string or NULL if not available */
const char *
scsi_sense_key_string(unsigned char key) {
-#ifdef CONFIG_SCSI_CONSTANTS
if (key <= 0xE)
return snstext[key];
-#endif
return NULL;
}
EXPORT_SYMBOL(scsi_sense_key_string);
@@ -1267,7 +1195,6 @@ EXPORT_SYMBOL(scsi_sense_key_string);
const char *
scsi_extd_sense_format(unsigned char asc, unsigned char ascq, const char **fmt)
{
-#ifdef CONFIG_SCSI_CONSTANTS
int i;
unsigned short code = ((asc << 8) | ascq);
@@ -1283,122 +1210,10 @@ scsi_extd_sense_format(unsigned char asc, unsigned char ascq, const char **fmt)
return additional2[i].str;
}
}
-#else
- *fmt = NULL;
-#endif
return NULL;
}
EXPORT_SYMBOL(scsi_extd_sense_format);
-void
-scsi_show_extd_sense(const struct scsi_device *sdev, const char *name,
- unsigned char asc, unsigned char ascq)
-{
- const char *extd_sense_fmt = NULL;
- const char *extd_sense_str = scsi_extd_sense_format(asc, ascq,
- &extd_sense_fmt);
-
- if (extd_sense_str) {
- if (extd_sense_fmt)
- sdev_prefix_printk(KERN_INFO, sdev, name,
- "Add. Sense: %s (%s%x)",
- extd_sense_str, extd_sense_fmt,
- ascq);
- else
- sdev_prefix_printk(KERN_INFO, sdev, name,
- "Add. Sense: %s", extd_sense_str);
-
- } else {
- sdev_prefix_printk(KERN_INFO, sdev, name,
- "%sASC=0x%x %sASCQ=0x%x\n",
- asc >= 0x80 ? "<<vendor>> " : "", asc,
- ascq >= 0x80 ? "<<vendor>> " : "", ascq);
- }
-}
-EXPORT_SYMBOL(scsi_show_extd_sense);
-
-void
-scsi_show_sense_hdr(const struct scsi_device *sdev, const char *name,
- const struct scsi_sense_hdr *sshdr)
-{
- const char *sense_txt;
-
- sense_txt = scsi_sense_key_string(sshdr->sense_key);
- if (sense_txt)
- sdev_prefix_printk(KERN_INFO, sdev, name,
- "Sense Key : %s [%s]%s\n", sense_txt,
- scsi_sense_is_deferred(sshdr) ?
- "deferred" : "current",
- sshdr->response_code >= 0x72 ?
- " [descriptor]" : "");
- else
- sdev_prefix_printk(KERN_INFO, sdev, name,
- "Sense Key : 0x%x [%s]%s", sshdr->sense_key,
- scsi_sense_is_deferred(sshdr) ?
- "deferred" : "current",
- sshdr->response_code >= 0x72 ?
- " [descriptor]" : "");
-}
-EXPORT_SYMBOL(scsi_show_sense_hdr);
-
-/*
- * Print normalized SCSI sense header with a prefix.
- */
-void
-scsi_print_sense_hdr(const struct scsi_device *sdev, const char *name,
- const struct scsi_sense_hdr *sshdr)
-{
- scsi_show_sense_hdr(sdev, name, sshdr);
- scsi_show_extd_sense(sdev, name, sshdr->asc, sshdr->ascq);
-}
-EXPORT_SYMBOL(scsi_print_sense_hdr);
-
-static void
-scsi_dump_sense_buffer(const unsigned char *sense_buffer, int sense_len)
-{
- int k, num;
-
- num = (sense_len < 32) ? sense_len : 32;
- printk("Unrecognized sense data (in hex):");
- for (k = 0; k < num; ++k) {
- if (0 == (k % 16)) {
- printk("\n");
- printk(KERN_INFO " ");
- }
- printk("%02x ", sense_buffer[k]);
- }
- printk("\n");
- return;
-}
-
-/* Normalize and print sense buffer with name prefix */
-void __scsi_print_sense(const struct scsi_device *sdev, const char *name,
- const unsigned char *sense_buffer, int sense_len)
-{
- struct scsi_sense_hdr sshdr;
-
- if (!scsi_normalize_sense(sense_buffer, sense_len, &sshdr)) {
- scsi_dump_sense_buffer(sense_buffer, sense_len);
- return;
- }
- scsi_show_sense_hdr(sdev, name, &sshdr);
- scsi_show_extd_sense(sdev, name, sshdr.asc, sshdr.ascq);
-}
-EXPORT_SYMBOL(__scsi_print_sense);
-
-/* Normalize and print sense buffer in SCSI command */
-void scsi_print_sense(const struct scsi_cmnd *cmd)
-{
- struct gendisk *disk = cmd->request->rq_disk;
- const char *disk_name = disk ? disk->disk_name : NULL;
-
- __scsi_print_sense(cmd->device, disk_name, cmd->sense_buffer,
- SCSI_SENSE_BUFFERSIZE);
-}
-EXPORT_SYMBOL(scsi_print_sense);
-
-#ifdef CONFIG_SCSI_CONSTANTS
-
static const char * const hostbyte_table[]={
"DID_OK", "DID_NO_CONNECT", "DID_BUS_BUSY", "DID_TIME_OUT", "DID_BAD_TARGET",
"DID_ABORT", "DID_PARITY", "DID_ERROR", "DID_RESET", "DID_BAD_INTR",
@@ -1410,17 +1225,13 @@ static const char * const driverbyte_table[]={
"DRIVER_OK", "DRIVER_BUSY", "DRIVER_SOFT", "DRIVER_MEDIA", "DRIVER_ERROR",
"DRIVER_INVALID", "DRIVER_TIMEOUT", "DRIVER_HARD", "DRIVER_SENSE"};
-#endif
-
const char *scsi_hostbyte_string(int result)
{
const char *hb_string = NULL;
-#ifdef CONFIG_SCSI_CONSTANTS
int hb = host_byte(result);
if (hb < ARRAY_SIZE(hostbyte_table))
hb_string = hostbyte_table[hb];
-#endif
return hb_string;
}
EXPORT_SYMBOL(scsi_hostbyte_string);
@@ -1428,17 +1239,14 @@ EXPORT_SYMBOL(scsi_hostbyte_string);
const char *scsi_driverbyte_string(int result)
{
const char *db_string = NULL;
-#ifdef CONFIG_SCSI_CONSTANTS
int db = driver_byte(result);
if (db < ARRAY_SIZE(driverbyte_table))
db_string = driverbyte_table[db];
-#endif
return db_string;
}
EXPORT_SYMBOL(scsi_driverbyte_string);
-#ifdef CONFIG_SCSI_CONSTANTS
#define scsi_mlreturn_name(result) { result, #result }
static const struct value_name_pair scsi_mlreturn_arr[] = {
scsi_mlreturn_name(NEEDS_RETRY),
@@ -1451,11 +1259,9 @@ static const struct value_name_pair scsi_mlreturn_arr[] = {
scsi_mlreturn_name(SCSI_RETURN_NOT_HANDLED),
scsi_mlreturn_name(FAST_IO_FAIL)
};
-#endif
const char *scsi_mlreturn_string(int result)
{
-#ifdef CONFIG_SCSI_CONSTANTS
const struct value_name_pair *arr = scsi_mlreturn_arr;
int k;
@@ -1463,29 +1269,6 @@ const char *scsi_mlreturn_string(int result)
if (result == arr->value)
return arr->name;
}
-#endif
return NULL;
}
EXPORT_SYMBOL(scsi_mlreturn_string);
-
-void scsi_print_result(struct scsi_cmnd *cmd, const char *msg, int disposition)
-{
- const char *mlret_string = scsi_mlreturn_string(disposition);
- const char *hb_string = scsi_hostbyte_string(cmd->result);
- const char *db_string = scsi_driverbyte_string(cmd->result);
-
- if (hb_string || db_string)
- scmd_printk(KERN_INFO, cmd,
- "%s%s Result: hostbyte=%s driverbyte=%s",
- msg ? msg : "",
- mlret_string ? mlret_string : "UNKNOWN",
- hb_string ? hb_string : "invalid",
- db_string ? db_string : "invalid");
- else
- scmd_printk(KERN_INFO, cmd,
- "%s%s Result: hostbyte=0x%02x driverbyte=0x%02x",
- msg ? msg : "",
- mlret_string ? mlret_string : "UNKNOWN",
- host_byte(cmd->result), driver_byte(cmd->result));
-}
-EXPORT_SYMBOL(scsi_print_result);
diff --git a/drivers/scsi/dc395x.c b/drivers/scsi/dc395x.c
index 0c6be0a17f53..5ee7f44cf869 100644
--- a/drivers/scsi/dc395x.c
+++ b/drivers/scsi/dc395x.c
@@ -4610,13 +4610,10 @@ static void adapter_uninit(struct AdapterCtlBlk *acb)
}
-#undef SPRINTF
-#define SPRINTF(args...) seq_printf(m,##args)
-
#undef YESNO
#define YESNO(YN) \
- if (YN) SPRINTF(" Yes ");\
- else SPRINTF(" No ")
+ if (YN) seq_printf(m, " Yes ");\
+ else seq_printf(m, " No ")
static int dc395x_show_info(struct seq_file *m, struct Scsi_Host *host)
{
@@ -4626,47 +4623,45 @@ static int dc395x_show_info(struct seq_file *m, struct Scsi_Host *host)
unsigned long flags;
int dev;
- SPRINTF(DC395X_BANNER " PCI SCSI Host Adapter\n");
- SPRINTF(" Driver Version " DC395X_VERSION "\n");
+ seq_puts(m, DC395X_BANNER " PCI SCSI Host Adapter\n"
+ " Driver Version " DC395X_VERSION "\n");
DC395x_LOCK_IO(acb->scsi_host, flags);
- SPRINTF("SCSI Host Nr %i, ", host->host_no);
- SPRINTF("DC395U/UW/F DC315/U %s\n",
+ seq_printf(m, "SCSI Host Nr %i, ", host->host_no);
+ seq_printf(m, "DC395U/UW/F DC315/U %s\n",
(acb->config & HCC_WIDE_CARD) ? "Wide" : "");
- SPRINTF("io_port_base 0x%04lx, ", acb->io_port_base);
- SPRINTF("irq_level 0x%04x, ", acb->irq_level);
- SPRINTF(" SelTimeout %ims\n", (1638 * acb->sel_timeout) / 1000);
+ seq_printf(m, "io_port_base 0x%04lx, ", acb->io_port_base);
+ seq_printf(m, "irq_level 0x%04x, ", acb->irq_level);
+ seq_printf(m, " SelTimeout %ims\n", (1638 * acb->sel_timeout) / 1000);
- SPRINTF("MaxID %i, MaxLUN %llu, ", host->max_id, host->max_lun);
- SPRINTF("AdapterID %i\n", host->this_id);
+ seq_printf(m, "MaxID %i, MaxLUN %llu, ", host->max_id, host->max_lun);
+ seq_printf(m, "AdapterID %i\n", host->this_id);
- SPRINTF("tag_max_num %i", acb->tag_max_num);
- /*SPRINTF(", DMA_Status %i\n", DC395x_read8(acb, TRM_S1040_DMA_STATUS)); */
- SPRINTF(", FilterCfg 0x%02x",
+ seq_printf(m, "tag_max_num %i", acb->tag_max_num);
+ /*seq_printf(m, ", DMA_Status %i\n", DC395x_read8(acb, TRM_S1040_DMA_STATUS)); */
+ seq_printf(m, ", FilterCfg 0x%02x",
DC395x_read8(acb, TRM_S1040_SCSI_CONFIG1));
- SPRINTF(", DelayReset %is\n", acb->eeprom.delay_time);
- /*SPRINTF("\n"); */
+ seq_printf(m, ", DelayReset %is\n", acb->eeprom.delay_time);
+ /*seq_printf(m, "\n"); */
- SPRINTF("Nr of DCBs: %i\n", list_size(&acb->dcb_list));
- SPRINTF
- ("Map of attached LUNs: %02x %02x %02x %02x %02x %02x %02x %02x\n",
+ seq_printf(m, "Nr of DCBs: %i\n", list_size(&acb->dcb_list));
+ seq_printf(m, "Map of attached LUNs: %02x %02x %02x %02x %02x %02x %02x %02x\n",
acb->dcb_map[0], acb->dcb_map[1], acb->dcb_map[2],
acb->dcb_map[3], acb->dcb_map[4], acb->dcb_map[5],
acb->dcb_map[6], acb->dcb_map[7]);
- SPRINTF
- (" %02x %02x %02x %02x %02x %02x %02x %02x\n",
+ seq_printf(m, " %02x %02x %02x %02x %02x %02x %02x %02x\n",
acb->dcb_map[8], acb->dcb_map[9], acb->dcb_map[10],
acb->dcb_map[11], acb->dcb_map[12], acb->dcb_map[13],
acb->dcb_map[14], acb->dcb_map[15]);
- SPRINTF
- ("Un ID LUN Prty Sync Wide DsCn SndS TagQ nego_period SyncFreq SyncOffs MaxCmd\n");
+ seq_puts(m,
+ "Un ID LUN Prty Sync Wide DsCn SndS TagQ nego_period SyncFreq SyncOffs MaxCmd\n");
dev = 0;
list_for_each_entry(dcb, &acb->dcb_list, list) {
int nego_period;
- SPRINTF("%02i %02i %02i ", dev, dcb->target_id,
+ seq_printf(m, "%02i %02i %02i ", dev, dcb->target_id,
dcb->target_lun);
YESNO(dcb->dev_mode & NTC_DO_PARITY_CHK);
YESNO(dcb->sync_offset);
@@ -4676,53 +4671,53 @@ static int dc395x_show_info(struct seq_file *m, struct Scsi_Host *host)
YESNO(dcb->sync_mode & EN_TAG_QUEUEING);
nego_period = clock_period[dcb->sync_period & 0x07] << 2;
if (dcb->sync_offset)
- SPRINTF(" %03i ns ", nego_period);
+ seq_printf(m, " %03i ns ", nego_period);
else
- SPRINTF(" (%03i ns)", (dcb->min_nego_period << 2));
+ seq_printf(m, " (%03i ns)", (dcb->min_nego_period << 2));
if (dcb->sync_offset & 0x0f) {
spd = 1000 / (nego_period);
spd1 = 1000 % (nego_period);
spd1 = (spd1 * 10 + nego_period / 2) / (nego_period);
- SPRINTF(" %2i.%1i M %02i ", spd, spd1,
+ seq_printf(m, " %2i.%1i M %02i ", spd, spd1,
(dcb->sync_offset & 0x0f));
} else
- SPRINTF(" ");
+ seq_puts(m, " ");
/* Add more info ... */
- SPRINTF(" %02i\n", dcb->max_command);
+ seq_printf(m, " %02i\n", dcb->max_command);
dev++;
}
if (timer_pending(&acb->waiting_timer))
- SPRINTF("Waiting queue timer running\n");
+ seq_puts(m, "Waiting queue timer running\n");
else
- SPRINTF("\n");
+ seq_putc(m, '\n');
list_for_each_entry(dcb, &acb->dcb_list, list) {
struct ScsiReqBlk *srb;
if (!list_empty(&dcb->srb_waiting_list))
- SPRINTF("DCB (%02i-%i): Waiting: %i:",
+ seq_printf(m, "DCB (%02i-%i): Waiting: %i:",
dcb->target_id, dcb->target_lun,
list_size(&dcb->srb_waiting_list));
list_for_each_entry(srb, &dcb->srb_waiting_list, list)
- SPRINTF(" %p", srb->cmd);
+ seq_printf(m, " %p", srb->cmd);
if (!list_empty(&dcb->srb_going_list))
- SPRINTF("\nDCB (%02i-%i): Going : %i:",
+ seq_printf(m, "\nDCB (%02i-%i): Going : %i:",
dcb->target_id, dcb->target_lun,
list_size(&dcb->srb_going_list));
list_for_each_entry(srb, &dcb->srb_going_list, list)
- SPRINTF(" %p", srb->cmd);
+ seq_printf(m, " %p", srb->cmd);
if (!list_empty(&dcb->srb_waiting_list) || !list_empty(&dcb->srb_going_list))
- SPRINTF("\n");
+ seq_putc(m, '\n');
}
if (debug_enabled(DBG_1)) {
- SPRINTF("DCB list for ACB %p:\n", acb);
+ seq_printf(m, "DCB list for ACB %p:\n", acb);
list_for_each_entry(dcb, &acb->dcb_list, list) {
- SPRINTF("%p -> ", dcb);
+ seq_printf(m, "%p -> ", dcb);
}
- SPRINTF("END\n");
+ seq_puts(m, "END\n");
}
DC395x_UNLOCK_IO(acb->scsi_host, flags);
diff --git a/drivers/scsi/dpt_i2o.c b/drivers/scsi/dpt_i2o.c
index 0bf976936a10..2806cfbec2b9 100644
--- a/drivers/scsi/dpt_i2o.c
+++ b/drivers/scsi/dpt_i2o.c
@@ -568,7 +568,7 @@ static int adpt_show_info(struct seq_file *m, struct Scsi_Host *host)
seq_printf(m, "\tpost fifo size = %d\n\treply fifo size = %d\n\tsg table size = %d\n\n",
host->can_queue, (int) pHba->reply_fifo_size , host->sg_tablesize);
- seq_printf(m, "Devices:\n");
+ seq_puts(m, "Devices:\n");
for(chan = 0; chan < MAX_CHANNEL; chan++) {
for(id = 0; id < MAX_ID; id++) {
d = pHba->channel[chan].device[id];
diff --git a/drivers/scsi/eata_pio.c b/drivers/scsi/eata_pio.c
index 8319d2b417b8..ca8003f0d8a3 100644
--- a/drivers/scsi/eata_pio.c
+++ b/drivers/scsi/eata_pio.c
@@ -102,7 +102,7 @@ static int eata_pio_show_info(struct seq_file *m, struct Scsi_Host *shost)
shost->host_no, SD(shost)->name);
seq_printf(m, "Firmware revision: v%s\n",
SD(shost)->revision);
- seq_printf(m, "IO: PIO\n");
+ seq_puts(m, "IO: PIO\n");
seq_printf(m, "Base IO : %#.4x\n", (u32) shost->base);
seq_printf(m, "Host Bus: %s\n",
(SD(shost)->bustype == 'P')?"PCI ":
diff --git a/drivers/scsi/esas2r/esas2r_main.c b/drivers/scsi/esas2r/esas2r_main.c
index 7e1c21e6736b..31f8966b2e03 100644
--- a/drivers/scsi/esas2r/esas2r_main.c
+++ b/drivers/scsi/esas2r/esas2r_main.c
@@ -749,7 +749,7 @@ int esas2r_show_info(struct seq_file *m, struct Scsi_Host *sh)
if (dev_count == 0)
seq_puts(m, "none\n");
- seq_puts(m, "\n");
+ seq_putc(m, '\n');
return 0;
}
diff --git a/drivers/scsi/esp_scsi.c b/drivers/scsi/esp_scsi.c
index ce5bd52fe692..065b25df741b 100644
--- a/drivers/scsi/esp_scsi.c
+++ b/drivers/scsi/esp_scsi.c
@@ -2396,8 +2396,6 @@ int scsi_esp_register(struct esp *esp, struct device *dev)
if (!esp->num_tags)
esp->num_tags = ESP_DEFAULT_TAGS;
- else if (esp->num_tags >= ESP_MAX_TAG)
- esp->num_tags = ESP_MAX_TAG - 1;
esp->host->transportt = esp_transport_template;
esp->host->max_lun = ESP_MAX_LUN;
esp->host->cmd_per_lun = 2;
diff --git a/drivers/scsi/gdth_proc.c b/drivers/scsi/gdth_proc.c
index 9fb632684863..e66e997992e3 100644
--- a/drivers/scsi/gdth_proc.c
+++ b/drivers/scsi/gdth_proc.c
@@ -173,7 +173,7 @@ int gdth_show_info(struct seq_file *m, struct Scsi_Host *host)
/* request is i.e. "cat /proc/scsi/gdth/0" */
/* format: %-15s\t%-10s\t%-15s\t%s */
/* driver parameters */
- seq_printf(m, "Driver Parameters:\n");
+ seq_puts(m, "Driver Parameters:\n");
if (reserve_list[0] == 0xff)
strcpy(hrec, "--");
else {
@@ -192,7 +192,7 @@ int gdth_show_info(struct seq_file *m, struct Scsi_Host *host)
max_ids, hdr_channel);
/* controller information */
- seq_printf(m,"\nDisk Array Controller Information:\n");
+ seq_puts(m, "\nDisk Array Controller Information:\n");
seq_printf(m,
" Number: \t%d \tName: \t%s\n",
ha->hanum, ha->binfo.type_string);
@@ -219,7 +219,7 @@ int gdth_show_info(struct seq_file *m, struct Scsi_Host *host)
#ifdef GDTH_DMA_STATISTICS
/* controller statistics */
- seq_printf(m,"\nController Statistics:\n");
+ seq_puts(m, "\nController Statistics:\n");
seq_printf(m,
" 32-bit DMA buffer:\t%lu\t64-bit DMA buffer:\t%lu\n",
ha->dma32_cnt, ha->dma64_cnt);
@@ -227,7 +227,7 @@ int gdth_show_info(struct seq_file *m, struct Scsi_Host *host)
if (ha->more_proc) {
/* more information: 2. about physical devices */
- seq_printf(m, "\nPhysical Devices:");
+ seq_puts(m, "\nPhysical Devices:");
flag = FALSE;
buf = gdth_ioctl_alloc(ha, GDTH_SCRATCH, FALSE, &paddr);
@@ -326,10 +326,10 @@ int gdth_show_info(struct seq_file *m, struct Scsi_Host *host)
gdth_ioctl_free(ha, GDTH_SCRATCH, buf, paddr);
if (!flag)
- seq_printf(m, "\n --\n");
+ seq_puts(m, "\n --\n");
/* 3. about logical drives */
- seq_printf(m,"\nLogical Drives:");
+ seq_puts(m, "\nLogical Drives:");
flag = FALSE;
buf = gdth_ioctl_alloc(ha, GDTH_SCRATCH, FALSE, &paddr);
@@ -411,10 +411,10 @@ int gdth_show_info(struct seq_file *m, struct Scsi_Host *host)
gdth_ioctl_free(ha, GDTH_SCRATCH, buf, paddr);
if (!flag)
- seq_printf(m, "\n --\n");
+ seq_puts(m, "\n --\n");
/* 4. about array drives */
- seq_printf(m,"\nArray Drives:");
+ seq_puts(m, "\nArray Drives:");
flag = FALSE;
buf = gdth_ioctl_alloc(ha, GDTH_SCRATCH, FALSE, &paddr);
@@ -471,10 +471,10 @@ int gdth_show_info(struct seq_file *m, struct Scsi_Host *host)
gdth_ioctl_free(ha, GDTH_SCRATCH, buf, paddr);
if (!flag)
- seq_printf(m, "\n --\n");
+ seq_puts(m, "\n --\n");
/* 5. about host drives */
- seq_printf(m,"\nHost Drives:");
+ seq_puts(m, "\nHost Drives:");
flag = FALSE;
buf = gdth_ioctl_alloc(ha, sizeof(gdth_hget_str), FALSE, &paddr);
@@ -527,11 +527,11 @@ int gdth_show_info(struct seq_file *m, struct Scsi_Host *host)
}
if (!flag)
- seq_printf(m, "\n --\n");
+ seq_puts(m, "\n --\n");
}
/* controller events */
- seq_printf(m,"\nController Events:\n");
+ seq_puts(m, "\nController Events:\n");
for (id = -1;;) {
id = gdth_read_event(ha, id, estr);
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index 6bb4611b238a..95d581c45413 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -50,6 +50,7 @@
#include <linux/jiffies.h>
#include <linux/percpu-defs.h>
#include <linux/percpu.h>
+#include <asm/unaligned.h>
#include <asm/div64.h>
#include "hpsa_cmd.h"
#include "hpsa.h"
@@ -59,8 +60,11 @@
#define DRIVER_NAME "HP HPSA Driver (v " HPSA_DRIVER_VERSION ")"
#define HPSA "hpsa"
-/* How long to wait (in milliseconds) for board to go into simple mode */
-#define MAX_CONFIG_WAIT 30000
+/* How long to wait for CISS doorbell communication */
+#define CLEAR_EVENT_WAIT_INTERVAL 20 /* ms for each msleep() call */
+#define MODE_CHANGE_WAIT_INTERVAL 10 /* ms for each msleep() call */
+#define MAX_CLEAR_EVENT_WAIT 30000 /* times 20 ms = 600 s */
+#define MAX_MODE_CHANGE_WAIT 2000 /* times 10 ms = 20 s */
#define MAX_IOCTL_CONFIG_WAIT 1000
/*define how many times we will try a command because of bus resets */
@@ -164,24 +168,24 @@ static struct board_type products[] = {
{0x1926103C, "Smart Array P731m", &SA5_access},
{0x1928103C, "Smart Array P230i", &SA5_access},
{0x1929103C, "Smart Array P530", &SA5_access},
- {0x21BD103C, "Smart Array", &SA5_access},
- {0x21BE103C, "Smart Array", &SA5_access},
- {0x21BF103C, "Smart Array", &SA5_access},
- {0x21C0103C, "Smart Array", &SA5_access},
- {0x21C1103C, "Smart Array", &SA5_access},
- {0x21C2103C, "Smart Array", &SA5_access},
- {0x21C3103C, "Smart Array", &SA5_access},
+ {0x21BD103C, "Smart Array P244br", &SA5_access},
+ {0x21BE103C, "Smart Array P741m", &SA5_access},
+ {0x21BF103C, "Smart HBA H240ar", &SA5_access},
+ {0x21C0103C, "Smart Array P440ar", &SA5_access},
+ {0x21C1103C, "Smart Array P840ar", &SA5_access},
+ {0x21C2103C, "Smart Array P440", &SA5_access},
+ {0x21C3103C, "Smart Array P441", &SA5_access},
{0x21C4103C, "Smart Array", &SA5_access},
- {0x21C5103C, "Smart Array", &SA5_access},
- {0x21C6103C, "Smart Array", &SA5_access},
- {0x21C7103C, "Smart Array", &SA5_access},
- {0x21C8103C, "Smart Array", &SA5_access},
+ {0x21C5103C, "Smart Array P841", &SA5_access},
+ {0x21C6103C, "Smart HBA H244br", &SA5_access},
+ {0x21C7103C, "Smart HBA H240", &SA5_access},
+ {0x21C8103C, "Smart HBA H241", &SA5_access},
{0x21C9103C, "Smart Array", &SA5_access},
- {0x21CA103C, "Smart Array", &SA5_access},
- {0x21CB103C, "Smart Array", &SA5_access},
+ {0x21CA103C, "Smart Array P246br", &SA5_access},
+ {0x21CB103C, "Smart Array P840", &SA5_access},
{0x21CC103C, "Smart Array", &SA5_access},
{0x21CD103C, "Smart Array", &SA5_access},
- {0x21CE103C, "Smart Array", &SA5_access},
+ {0x21CE103C, "Smart HBA", &SA5_access},
{0x00761590, "HP Storage P1224 Array Controller", &SA5_access},
{0x00871590, "HP Storage P1224e Array Controller", &SA5_access},
{0x007D1590, "HP Storage P1228 Array Controller", &SA5_access},
@@ -195,8 +199,6 @@ static int number_of_controllers;
static irqreturn_t do_hpsa_intr_intx(int irq, void *dev_id);
static irqreturn_t do_hpsa_intr_msi(int irq, void *dev_id);
static int hpsa_ioctl(struct scsi_device *dev, int cmd, void __user *arg);
-static void lock_and_start_io(struct ctlr_info *h);
-static void start_io(struct ctlr_info *h, unsigned long *flags);
#ifdef CONFIG_COMPAT
static int hpsa_compat_ioctl(struct scsi_device *dev, int cmd,
@@ -204,18 +206,18 @@ static int hpsa_compat_ioctl(struct scsi_device *dev, int cmd,
#endif
static void cmd_free(struct ctlr_info *h, struct CommandList *c);
-static void cmd_special_free(struct ctlr_info *h, struct CommandList *c);
static struct CommandList *cmd_alloc(struct ctlr_info *h);
-static struct CommandList *cmd_special_alloc(struct ctlr_info *h);
static int fill_cmd(struct CommandList *c, u8 cmd, struct ctlr_info *h,
void *buff, size_t size, u16 page_code, unsigned char *scsi3addr,
int cmd_type);
+static void hpsa_free_cmd_pool(struct ctlr_info *h);
#define VPD_PAGE (1 << 8)
static int hpsa_scsi_queue_command(struct Scsi_Host *h, struct scsi_cmnd *cmd);
static void hpsa_scan_start(struct Scsi_Host *);
static int hpsa_scan_finished(struct Scsi_Host *sh,
unsigned long elapsed_time);
+static int hpsa_change_queue_depth(struct scsi_device *sdev, int qdepth);
static int hpsa_eh_device_reset_handler(struct scsi_cmnd *scsicmd);
static int hpsa_eh_abort_handler(struct scsi_cmnd *scsicmd);
@@ -229,7 +231,7 @@ static void check_ioctl_unit_attention(struct ctlr_info *h,
struct CommandList *c);
/* performant mode helper functions */
static void calc_bucket_map(int *bucket, int num_buckets,
- int nsgs, int min_blocks, int *bucket_map);
+ int nsgs, int min_blocks, u32 *bucket_map);
static void hpsa_put_ctlr_into_performant_mode(struct ctlr_info *h);
static inline u32 next_command(struct ctlr_info *h, u8 q);
static int hpsa_find_cfg_addrs(struct pci_dev *pdev, void __iomem *vaddr,
@@ -241,14 +243,15 @@ static int hpsa_lookup_board_id(struct pci_dev *pdev, u32 *board_id);
static int hpsa_wait_for_board_state(struct pci_dev *pdev, void __iomem *vaddr,
int wait_for_ready);
static inline void finish_cmd(struct CommandList *c);
-static void hpsa_wait_for_mode_change_ack(struct ctlr_info *h);
+static int hpsa_wait_for_mode_change_ack(struct ctlr_info *h);
#define BOARD_NOT_READY 0
#define BOARD_READY 1
static void hpsa_drain_accel_commands(struct ctlr_info *h);
static void hpsa_flush_cache(struct ctlr_info *h);
static int hpsa_scsi_ioaccel_queue_command(struct ctlr_info *h,
struct CommandList *c, u32 ioaccel_handle, u8 *cdb, int cdb_len,
- u8 *scsi3addr);
+ u8 *scsi3addr, struct hpsa_scsi_dev_t *phys_disk);
+static void hpsa_command_resubmit_worker(struct work_struct *work);
static inline struct ctlr_info *sdev_to_hba(struct scsi_device *sdev)
{
@@ -505,8 +508,8 @@ static inline int is_logical_dev_addr_mode(unsigned char scsi3addr[])
return (scsi3addr[3] & 0xC0) == 0x40;
}
-static const char *raid_label[] = { "0", "4", "1(1+0)", "5", "5+1", "ADG",
- "1(ADM)", "UNKNOWN"
+static const char * const raid_label[] = { "0", "4", "1(+0)", "5", "5+1", "6",
+ "1(+0)ADM", "UNKNOWN"
};
#define HPSA_RAID_0 0
#define HPSA_RAID_4 1
@@ -671,7 +674,7 @@ static struct scsi_host_template hpsa_driver_template = {
.queuecommand = hpsa_scsi_queue_command,
.scan_start = hpsa_scan_start,
.scan_finished = hpsa_scan_finished,
- .change_queue_depth = scsi_change_queue_depth,
+ .change_queue_depth = hpsa_change_queue_depth,
.this_id = -1,
.use_clustering = ENABLE_CLUSTERING,
.eh_abort_handler = hpsa_eh_abort_handler,
@@ -688,13 +691,6 @@ static struct scsi_host_template hpsa_driver_template = {
.no_write_same = 1,
};
-
-/* Enqueuing and dequeuing functions for cmdlists. */
-static inline void addQ(struct list_head *list, struct CommandList *c)
-{
- list_add_tail(&c->list, list);
-}
-
static inline u32 next_command(struct ctlr_info *h, u8 q)
{
u32 a;
@@ -828,31 +824,21 @@ static void dial_up_lockup_detection_on_fw_flash_complete(struct ctlr_info *h,
static void enqueue_cmd_and_start_io(struct ctlr_info *h,
struct CommandList *c)
{
- unsigned long flags;
-
+ dial_down_lockup_detection_during_fw_flash(h, c);
+ atomic_inc(&h->commands_outstanding);
switch (c->cmd_type) {
case CMD_IOACCEL1:
set_ioaccel1_performant_mode(h, c);
+ writel(c->busaddr, h->vaddr + SA5_REQUEST_PORT_OFFSET);
break;
case CMD_IOACCEL2:
set_ioaccel2_performant_mode(h, c);
+ writel(c->busaddr, h->vaddr + IOACCEL2_INBOUND_POSTQ_32);
break;
default:
set_performant_mode(h, c);
+ h->access.submit_command(h, c);
}
- dial_down_lockup_detection_during_fw_flash(h, c);
- spin_lock_irqsave(&h->lock, flags);
- addQ(&h->reqQ, c);
- h->Qdepth++;
- start_io(h, &flags);
- spin_unlock_irqrestore(&h->lock, flags);
-}
-
-static inline void removeQ(struct CommandList *c)
-{
- if (WARN_ON(list_empty(&c->list)))
- return;
- list_del_init(&c->list);
}
static inline int is_hba_lunid(unsigned char scsi3addr[])
@@ -919,7 +905,7 @@ static int hpsa_scsi_add_entry(struct ctlr_info *h, int hostno,
/* If this device a non-zero lun of a multi-lun device
* byte 4 of the 8-byte LUN addr will contain the logical
- * unit no, zero otherise.
+ * unit no, zero otherwise.
*/
if (device->scsi3addr[4] == 0) {
/* This is not a non-zero lun of a multi-lun device */
@@ -984,12 +970,24 @@ static void hpsa_scsi_update_entry(struct ctlr_info *h, int hostno,
/* Raid level changed. */
h->dev[entry]->raid_level = new_entry->raid_level;
- /* Raid offload parameters changed. */
+ /* Raid offload parameters changed. Careful about the ordering. */
+ if (new_entry->offload_config && new_entry->offload_enabled) {
+ /*
+ * if drive is newly offload_enabled, we want to copy the
+ * raid map data first. If previously offload_enabled and
+ * offload_config were set, raid map data had better be
+ * the same as it was before. if raid map data is changed
+ * then it had better be the case that
+ * h->dev[entry]->offload_enabled is currently 0.
+ */
+ h->dev[entry]->raid_map = new_entry->raid_map;
+ h->dev[entry]->ioaccel_handle = new_entry->ioaccel_handle;
+ wmb(); /* ensure raid map updated prior to ->offload_enabled */
+ }
h->dev[entry]->offload_config = new_entry->offload_config;
- h->dev[entry]->offload_enabled = new_entry->offload_enabled;
- h->dev[entry]->ioaccel_handle = new_entry->ioaccel_handle;
h->dev[entry]->offload_to_mirror = new_entry->offload_to_mirror;
- h->dev[entry]->raid_map = new_entry->raid_map;
+ h->dev[entry]->offload_enabled = new_entry->offload_enabled;
+ h->dev[entry]->queue_depth = new_entry->queue_depth;
dev_info(&h->pdev->dev, "%s device c%db%dt%dl%d updated.\n",
scsi_device_type(new_entry->devtype), hostno, new_entry->bus,
@@ -1115,6 +1113,8 @@ static inline int device_updated(struct hpsa_scsi_dev_t *dev1,
return 1;
if (dev1->offload_enabled != dev2->offload_enabled)
return 1;
+ if (dev1->queue_depth != dev2->queue_depth)
+ return 1;
return 0;
}
@@ -1260,6 +1260,85 @@ static void hpsa_show_volume_status(struct ctlr_info *h,
}
}
+/*
+ * Figure the list of physical drive pointers for a logical drive with
+ * raid offload configured.
+ */
+static void hpsa_figure_phys_disk_ptrs(struct ctlr_info *h,
+ struct hpsa_scsi_dev_t *dev[], int ndevices,
+ struct hpsa_scsi_dev_t *logical_drive)
+{
+ struct raid_map_data *map = &logical_drive->raid_map;
+ struct raid_map_disk_data *dd = &map->data[0];
+ int i, j;
+ int total_disks_per_row = le16_to_cpu(map->data_disks_per_row) +
+ le16_to_cpu(map->metadata_disks_per_row);
+ int nraid_map_entries = le16_to_cpu(map->row_cnt) *
+ le16_to_cpu(map->layout_map_count) *
+ total_disks_per_row;
+ int nphys_disk = le16_to_cpu(map->layout_map_count) *
+ total_disks_per_row;
+ int qdepth;
+
+ if (nraid_map_entries > RAID_MAP_MAX_ENTRIES)
+ nraid_map_entries = RAID_MAP_MAX_ENTRIES;
+
+ qdepth = 0;
+ for (i = 0; i < nraid_map_entries; i++) {
+ logical_drive->phys_disk[i] = NULL;
+ if (!logical_drive->offload_config)
+ continue;
+ for (j = 0; j < ndevices; j++) {
+ if (dev[j]->devtype != TYPE_DISK)
+ continue;
+ if (is_logical_dev_addr_mode(dev[j]->scsi3addr))
+ continue;
+ if (dev[j]->ioaccel_handle != dd[i].ioaccel_handle)
+ continue;
+
+ logical_drive->phys_disk[i] = dev[j];
+ if (i < nphys_disk)
+ qdepth = min(h->nr_cmds, qdepth +
+ logical_drive->phys_disk[i]->queue_depth);
+ break;
+ }
+
+ /*
+ * This can happen if a physical drive is removed and
+ * the logical drive is degraded. In that case, the RAID
+ * map data will refer to a physical disk which isn't actually
+ * present. And in that case offload_enabled should already
+ * be 0, but we'll turn it off here just in case
+ */
+ if (!logical_drive->phys_disk[i]) {
+ logical_drive->offload_enabled = 0;
+ logical_drive->queue_depth = h->nr_cmds;
+ }
+ }
+ if (nraid_map_entries)
+ /*
+ * This is correct for reads, too high for full stripe writes,
+ * way too high for partial stripe writes
+ */
+ logical_drive->queue_depth = qdepth;
+ else
+ logical_drive->queue_depth = h->nr_cmds;
+}
+
+static void hpsa_update_log_drive_phys_drive_ptrs(struct ctlr_info *h,
+ struct hpsa_scsi_dev_t *dev[], int ndevices)
+{
+ int i;
+
+ for (i = 0; i < ndevices; i++) {
+ if (dev[i]->devtype != TYPE_DISK)
+ continue;
+ if (!is_logical_dev_addr_mode(dev[i]->scsi3addr))
+ continue;
+ hpsa_figure_phys_disk_ptrs(h, dev, ndevices, dev[i]);
+ }
+}
+
static void adjust_hpsa_scsi_table(struct ctlr_info *h, int hostno,
struct hpsa_scsi_dev_t *sd[], int nsds)
{
@@ -1444,8 +1523,12 @@ static int hpsa_slave_alloc(struct scsi_device *sdev)
spin_lock_irqsave(&h->devlock, flags);
sd = lookup_hpsa_scsi_dev(h, sdev_channel(sdev),
sdev_id(sdev), sdev->lun);
- if (sd != NULL)
+ if (sd != NULL) {
sdev->hostdata = sd;
+ if (sd->queue_depth)
+ scsi_change_queue_depth(sdev, sd->queue_depth);
+ atomic_set(&sd->ioaccel_cmds_out, 0);
+ }
spin_unlock_irqrestore(&h->devlock, flags);
return 0;
}
@@ -1478,13 +1561,17 @@ static int hpsa_allocate_sg_chain_blocks(struct ctlr_info *h)
h->cmd_sg_list = kzalloc(sizeof(*h->cmd_sg_list) * h->nr_cmds,
GFP_KERNEL);
- if (!h->cmd_sg_list)
+ if (!h->cmd_sg_list) {
+ dev_err(&h->pdev->dev, "Failed to allocate SG list\n");
return -ENOMEM;
+ }
for (i = 0; i < h->nr_cmds; i++) {
h->cmd_sg_list[i] = kmalloc(sizeof(*h->cmd_sg_list[i]) *
h->chainsize, GFP_KERNEL);
- if (!h->cmd_sg_list[i])
+ if (!h->cmd_sg_list[i]) {
+ dev_err(&h->pdev->dev, "Failed to allocate cmd SG\n");
goto clean;
+ }
}
return 0;
@@ -1504,7 +1591,7 @@ static int hpsa_map_sg_chain_block(struct ctlr_info *h,
chain_block = h->cmd_sg_list[c->cmdindex];
chain_sg->Ext = cpu_to_le32(HPSA_SG_CHAIN);
chain_len = sizeof(*chain_sg) *
- (c->Header.SGTotal - h->max_cmd_sg_entries);
+ (le16_to_cpu(c->Header.SGTotal) - h->max_cmd_sg_entries);
chain_sg->Len = cpu_to_le32(chain_len);
temp64 = pci_map_single(h->pdev, chain_block, chain_len,
PCI_DMA_TODEVICE);
@@ -1635,7 +1722,6 @@ static void process_ioaccel2_completion(struct ctlr_info *h,
struct hpsa_scsi_dev_t *dev)
{
struct io_accel2_cmd *c2 = &h->ioaccel2_cmd_pool[c->cmdindex];
- int raid_retry = 0;
/* check for good status */
if (likely(c2->error_data.serv_response == 0 &&
@@ -1652,26 +1738,22 @@ static void process_ioaccel2_completion(struct ctlr_info *h,
if (is_logical_dev_addr_mode(dev->scsi3addr) &&
c2->error_data.serv_response ==
IOACCEL2_SERV_RESPONSE_FAILURE) {
- dev->offload_enabled = 0;
- h->drv_req_rescan = 1; /* schedule controller for a rescan */
- cmd->result = DID_SOFT_ERROR << 16;
- cmd_free(h, c);
- cmd->scsi_done(cmd);
- return;
- }
- raid_retry = handle_ioaccel_mode2_error(h, c, cmd, c2);
- /* If error found, disable Smart Path, schedule a rescan,
- * and force a retry on the standard path.
- */
- if (raid_retry) {
- dev_warn(&h->pdev->dev, "%s: Retrying on standard path.\n",
- "HP SSD Smart Path");
- dev->offload_enabled = 0; /* Disable Smart Path */
- h->drv_req_rescan = 1; /* schedule controller rescan */
- cmd->result = DID_SOFT_ERROR << 16;
+ if (c2->error_data.status ==
+ IOACCEL2_STATUS_SR_IOACCEL_DISABLED)
+ dev->offload_enabled = 0;
+ goto retry_cmd;
}
+
+ if (handle_ioaccel_mode2_error(h, c, cmd, c2))
+ goto retry_cmd;
+
cmd_free(h, c);
cmd->scsi_done(cmd);
+ return;
+
+retry_cmd:
+ INIT_WORK(&c->work, hpsa_command_resubmit_worker);
+ queue_work_on(raw_smp_processor_id(), h->resubmit_wq, &c->work);
}
static void complete_scsi_command(struct CommandList *cp)
@@ -1687,18 +1769,21 @@ static void complete_scsi_command(struct CommandList *cp)
unsigned long sense_data_size;
ei = cp->err_info;
- cmd = (struct scsi_cmnd *) cp->scsi_cmd;
+ cmd = cp->scsi_cmd;
h = cp->h;
dev = cmd->device->hostdata;
scsi_dma_unmap(cmd); /* undo the DMA mappings */
if ((cp->cmd_type == CMD_SCSI) &&
- (cp->Header.SGTotal > h->max_cmd_sg_entries))
+ (le16_to_cpu(cp->Header.SGTotal) > h->max_cmd_sg_entries))
hpsa_unmap_sg_chain_block(h, cp);
cmd->result = (DID_OK << 16); /* host byte */
cmd->result |= (COMMAND_COMPLETE << 8); /* msg byte */
+ if (cp->cmd_type == CMD_IOACCEL2 || cp->cmd_type == CMD_IOACCEL1)
+ atomic_dec(&cp->phys_disk->ioaccel_cmds_out);
+
if (cp->cmd_type == CMD_IOACCEL2)
return process_ioaccel2_completion(h, cp, cmd, dev);
@@ -1706,6 +1791,8 @@ static void complete_scsi_command(struct CommandList *cp)
scsi_set_resid(cmd, ei->ResidualCnt);
if (ei->CommandStatus == 0) {
+ if (cp->cmd_type == CMD_IOACCEL1)
+ atomic_dec(&cp->phys_disk->ioaccel_cmds_out);
cmd_free(h, cp);
cmd->scsi_done(cmd);
return;
@@ -1726,8 +1813,10 @@ static void complete_scsi_command(struct CommandList *cp)
*/
if (cp->cmd_type == CMD_IOACCEL1) {
struct io_accel1_cmd *c = &h->ioaccel_cmd_pool[cp->cmdindex];
- cp->Header.SGList = cp->Header.SGTotal = scsi_sg_count(cmd);
- cp->Request.CDBLen = c->io_flags & IOACCEL1_IOFLAGS_CDBLEN_MASK;
+ cp->Header.SGList = scsi_sg_count(cmd);
+ cp->Header.SGTotal = cpu_to_le16(cp->Header.SGList);
+ cp->Request.CDBLen = le16_to_cpu(c->io_flags) &
+ IOACCEL1_IOFLAGS_CDBLEN_MASK;
cp->Header.tag = c->tag;
memcpy(cp->Header.LUN.LunAddrBytes, c->CISS_LUN, 8);
memcpy(cp->Request.CDB, c->CDB, cp->Request.CDBLen);
@@ -1739,9 +1828,9 @@ static void complete_scsi_command(struct CommandList *cp)
if (is_logical_dev_addr_mode(dev->scsi3addr)) {
if (ei->CommandStatus == CMD_IOACCEL_DISABLED)
dev->offload_enabled = 0;
- cmd->result = DID_SOFT_ERROR << 16;
- cmd_free(h, cp);
- cmd->scsi_done(cmd);
+ INIT_WORK(&cp->work, hpsa_command_resubmit_worker);
+ queue_work_on(raw_smp_processor_id(),
+ h->resubmit_wq, &cp->work);
return;
}
}
@@ -1798,9 +1887,8 @@ static void complete_scsi_command(struct CommandList *cp)
case CMD_DATA_UNDERRUN: /* let mid layer handle it. */
break;
case CMD_DATA_OVERRUN:
- dev_warn(&h->pdev->dev, "cp %p has"
- " completed with data overrun "
- "reported\n", cp);
+ dev_warn(&h->pdev->dev,
+ "CDB %16phN data overrun\n", cp->Request.CDB);
break;
case CMD_INVALID: {
/* print_bytes(cp, sizeof(*cp), 1, 0);
@@ -1816,34 +1904,38 @@ static void complete_scsi_command(struct CommandList *cp)
break;
case CMD_PROTOCOL_ERR:
cmd->result = DID_ERROR << 16;
- dev_warn(&h->pdev->dev, "cp %p has "
- "protocol error\n", cp);
+ dev_warn(&h->pdev->dev, "CDB %16phN : protocol error\n",
+ cp->Request.CDB);
break;
case CMD_HARDWARE_ERR:
cmd->result = DID_ERROR << 16;
- dev_warn(&h->pdev->dev, "cp %p had hardware error\n", cp);
+ dev_warn(&h->pdev->dev, "CDB %16phN : hardware error\n",
+ cp->Request.CDB);
break;
case CMD_CONNECTION_LOST:
cmd->result = DID_ERROR << 16;
- dev_warn(&h->pdev->dev, "cp %p had connection lost\n", cp);
+ dev_warn(&h->pdev->dev, "CDB %16phN : connection lost\n",
+ cp->Request.CDB);
break;
case CMD_ABORTED:
cmd->result = DID_ABORT << 16;
- dev_warn(&h->pdev->dev, "cp %p was aborted with status 0x%x\n",
- cp, ei->ScsiStatus);
+ dev_warn(&h->pdev->dev, "CDB %16phN was aborted with status 0x%x\n",
+ cp->Request.CDB, ei->ScsiStatus);
break;
case CMD_ABORT_FAILED:
cmd->result = DID_ERROR << 16;
- dev_warn(&h->pdev->dev, "cp %p reports abort failed\n", cp);
+ dev_warn(&h->pdev->dev, "CDB %16phN : abort failed\n",
+ cp->Request.CDB);
break;
case CMD_UNSOLICITED_ABORT:
cmd->result = DID_SOFT_ERROR << 16; /* retry the command */
- dev_warn(&h->pdev->dev, "cp %p aborted due to an unsolicited "
- "abort\n", cp);
+ dev_warn(&h->pdev->dev, "CDB %16phN : unsolicited abort\n",
+ cp->Request.CDB);
break;
case CMD_TIMEOUT:
cmd->result = DID_TIME_OUT << 16;
- dev_warn(&h->pdev->dev, "cp %p timedout\n", cp);
+ dev_warn(&h->pdev->dev, "CDB %16phN timed out\n",
+ cp->Request.CDB);
break;
case CMD_UNABORTABLE:
cmd->result = DID_ERROR << 16;
@@ -2048,10 +2140,10 @@ static int hpsa_scsi_do_inquiry(struct ctlr_info *h, unsigned char *scsi3addr,
struct CommandList *c;
struct ErrorInfo *ei;
- c = cmd_special_alloc(h);
+ c = cmd_alloc(h);
- if (c == NULL) { /* trouble... */
- dev_warn(&h->pdev->dev, "cmd_special_alloc returned NULL!\n");
+ if (c == NULL) {
+ dev_warn(&h->pdev->dev, "cmd_alloc returned NULL!\n");
return -ENOMEM;
}
@@ -2067,7 +2159,7 @@ static int hpsa_scsi_do_inquiry(struct ctlr_info *h, unsigned char *scsi3addr,
rc = -1;
}
out:
- cmd_special_free(h, c);
+ cmd_free(h, c);
return rc;
}
@@ -2079,10 +2171,9 @@ static int hpsa_bmic_ctrl_mode_sense(struct ctlr_info *h,
struct CommandList *c;
struct ErrorInfo *ei;
- c = cmd_special_alloc(h);
-
+ c = cmd_alloc(h);
if (c == NULL) { /* trouble... */
- dev_warn(&h->pdev->dev, "cmd_special_alloc returned NULL!\n");
+ dev_warn(&h->pdev->dev, "cmd_alloc returned NULL!\n");
return -ENOMEM;
}
@@ -2098,7 +2189,7 @@ static int hpsa_bmic_ctrl_mode_sense(struct ctlr_info *h,
rc = -1;
}
out:
- cmd_special_free(h, c);
+ cmd_free(h, c);
return rc;
}
@@ -2109,10 +2200,10 @@ static int hpsa_send_reset(struct ctlr_info *h, unsigned char *scsi3addr,
struct CommandList *c;
struct ErrorInfo *ei;
- c = cmd_special_alloc(h);
+ c = cmd_alloc(h);
if (c == NULL) { /* trouble... */
- dev_warn(&h->pdev->dev, "cmd_special_alloc returned NULL!\n");
+ dev_warn(&h->pdev->dev, "cmd_alloc returned NULL!\n");
return -ENOMEM;
}
@@ -2128,7 +2219,7 @@ static int hpsa_send_reset(struct ctlr_info *h, unsigned char *scsi3addr,
hpsa_scsi_interpret_error(h, c);
rc = -1;
}
- cmd_special_free(h, c);
+ cmd_free(h, c);
return rc;
}
@@ -2191,15 +2282,13 @@ static void hpsa_debug_map_buff(struct ctlr_info *h, int rc,
le16_to_cpu(map_buff->row_cnt));
dev_info(&h->pdev->dev, "layout_map_count = %u\n",
le16_to_cpu(map_buff->layout_map_count));
- dev_info(&h->pdev->dev, "flags = %u\n",
+ dev_info(&h->pdev->dev, "flags = 0x%x\n",
le16_to_cpu(map_buff->flags));
- if (map_buff->flags & RAID_MAP_FLAG_ENCRYPT_ON)
- dev_info(&h->pdev->dev, "encrypytion = ON\n");
- else
- dev_info(&h->pdev->dev, "encrypytion = OFF\n");
+ dev_info(&h->pdev->dev, "encrypytion = %s\n",
+ le16_to_cpu(map_buff->flags) &
+ RAID_MAP_FLAG_ENCRYPT_ON ? "ON" : "OFF");
dev_info(&h->pdev->dev, "dekindex = %u\n",
le16_to_cpu(map_buff->dekindex));
-
map_cnt = le16_to_cpu(map_buff->layout_map_count);
for (map = 0; map < map_cnt; map++) {
dev_info(&h->pdev->dev, "Map%u:\n", map);
@@ -2238,26 +2327,26 @@ static int hpsa_get_raid_map(struct ctlr_info *h,
struct CommandList *c;
struct ErrorInfo *ei;
- c = cmd_special_alloc(h);
+ c = cmd_alloc(h);
if (c == NULL) {
- dev_warn(&h->pdev->dev, "cmd_special_alloc returned NULL!\n");
+ dev_warn(&h->pdev->dev, "cmd_alloc returned NULL!\n");
return -ENOMEM;
}
if (fill_cmd(c, HPSA_GET_RAID_MAP, h, &this_device->raid_map,
sizeof(this_device->raid_map), 0,
scsi3addr, TYPE_CMD)) {
dev_warn(&h->pdev->dev, "Out of memory in hpsa_get_raid_map()\n");
- cmd_special_free(h, c);
+ cmd_free(h, c);
return -ENOMEM;
}
hpsa_scsi_do_simple_cmd_with_retry(h, c, PCI_DMA_FROMDEVICE);
ei = c->err_info;
if (ei->CommandStatus != 0 && ei->CommandStatus != CMD_DATA_UNDERRUN) {
hpsa_scsi_interpret_error(h, c);
- cmd_special_free(h, c);
+ cmd_free(h, c);
return -1;
}
- cmd_special_free(h, c);
+ cmd_free(h, c);
/* @todo in the future, dynamically allocate RAID map memory */
if (le32_to_cpu(this_device->raid_map.structure_size) >
@@ -2269,6 +2358,34 @@ static int hpsa_get_raid_map(struct ctlr_info *h,
return rc;
}
+static int hpsa_bmic_id_physical_device(struct ctlr_info *h,
+ unsigned char scsi3addr[], u16 bmic_device_index,
+ struct bmic_identify_physical_device *buf, size_t bufsize)
+{
+ int rc = IO_OK;
+ struct CommandList *c;
+ struct ErrorInfo *ei;
+
+ c = cmd_alloc(h);
+ rc = fill_cmd(c, BMIC_IDENTIFY_PHYSICAL_DEVICE, h, buf, bufsize,
+ 0, RAID_CTLR_LUNID, TYPE_CMD);
+ if (rc)
+ goto out;
+
+ c->Request.CDB[2] = bmic_device_index & 0xff;
+ c->Request.CDB[9] = (bmic_device_index >> 8) & 0xff;
+
+ hpsa_scsi_do_simple_cmd_with_retry(h, c, PCI_DMA_FROMDEVICE);
+ ei = c->err_info;
+ if (ei->CommandStatus != 0 && ei->CommandStatus != CMD_DATA_UNDERRUN) {
+ hpsa_scsi_interpret_error(h, c);
+ rc = -1;
+ }
+out:
+ cmd_free(h, c);
+ return rc;
+}
+
static int hpsa_vpd_page_supported(struct ctlr_info *h,
unsigned char scsi3addr[], u8 page)
{
@@ -2369,7 +2486,7 @@ static int hpsa_get_device_id(struct ctlr_info *h, unsigned char *scsi3addr,
}
static int hpsa_scsi_do_report_luns(struct ctlr_info *h, int logical,
- struct ReportLUNdata *buf, int bufsize,
+ void *buf, int bufsize,
int extended_response)
{
int rc = IO_OK;
@@ -2377,9 +2494,9 @@ static int hpsa_scsi_do_report_luns(struct ctlr_info *h, int logical,
unsigned char scsi3addr[8];
struct ErrorInfo *ei;
- c = cmd_special_alloc(h);
+ c = cmd_alloc(h);
if (c == NULL) { /* trouble... */
- dev_err(&h->pdev->dev, "cmd_special_alloc returned NULL!\n");
+ dev_err(&h->pdev->dev, "cmd_alloc returned NULL!\n");
return -1;
}
/* address the controller */
@@ -2398,24 +2515,26 @@ static int hpsa_scsi_do_report_luns(struct ctlr_info *h, int logical,
hpsa_scsi_interpret_error(h, c);
rc = -1;
} else {
- if (buf->extended_response_flag != extended_response) {
+ struct ReportLUNdata *rld = buf;
+
+ if (rld->extended_response_flag != extended_response) {
dev_err(&h->pdev->dev,
"report luns requested format %u, got %u\n",
extended_response,
- buf->extended_response_flag);
+ rld->extended_response_flag);
rc = -1;
}
}
out:
- cmd_special_free(h, c);
+ cmd_free(h, c);
return rc;
}
static inline int hpsa_scsi_do_report_phys_luns(struct ctlr_info *h,
- struct ReportLUNdata *buf,
- int bufsize, int extended_response)
+ struct ReportExtendedLUNdata *buf, int bufsize)
{
- return hpsa_scsi_do_report_luns(h, 0, buf, bufsize, extended_response);
+ return hpsa_scsi_do_report_luns(h, 0, buf, bufsize,
+ HPSA_REPORT_PHYS_EXTENDED);
}
static inline int hpsa_scsi_do_report_log_luns(struct ctlr_info *h,
@@ -2590,6 +2709,7 @@ static int hpsa_update_device_info(struct ctlr_info *h,
this_device->offload_config = 0;
this_device->offload_enabled = 0;
this_device->volume_offline = 0;
+ this_device->queue_depth = h->nr_cmds;
}
if (is_OBDR_device) {
@@ -2732,7 +2852,6 @@ static int hpsa_get_pdisk_of_ioaccel2(struct ctlr_info *h,
{
struct ReportExtendedLUNdata *physicals = NULL;
int responsesize = 24; /* size of physical extended response */
- int extended = 2; /* flag forces reporting 'other dev info'. */
int reportsize = sizeof(*physicals) + HPSA_MAX_PHYS_LUN * responsesize;
u32 nphysicals = 0; /* number of reported physical devs */
int found = 0; /* found match (1) or not (0) */
@@ -2741,8 +2860,8 @@ static int hpsa_get_pdisk_of_ioaccel2(struct ctlr_info *h,
struct scsi_cmnd *scmd; /* scsi command within request being aborted */
struct hpsa_scsi_dev_t *d; /* device of request being aborted */
struct io_accel2_cmd *c2a; /* ioaccel2 command to abort */
- u32 it_nexus; /* 4 byte device handle for the ioaccel2 cmd */
- u32 scsi_nexus; /* 4 byte device handle for the ioaccel2 cmd */
+ __le32 it_nexus; /* 4 byte device handle for the ioaccel2 cmd */
+ __le32 scsi_nexus; /* 4 byte device handle for the ioaccel2 cmd */
if (ioaccel2_cmd_to_abort->cmd_type != CMD_IOACCEL2)
return 0; /* no match */
@@ -2761,8 +2880,8 @@ static int hpsa_get_pdisk_of_ioaccel2(struct ctlr_info *h,
return 0; /* no match */
it_nexus = cpu_to_le32(d->ioaccel_handle);
- scsi_nexus = cpu_to_le32(c2a->scsi_nexus);
- find = c2a->scsi_nexus;
+ scsi_nexus = c2a->scsi_nexus;
+ find = le32_to_cpu(c2a->scsi_nexus);
if (h->raid_offload_debug > 0)
dev_info(&h->pdev->dev,
@@ -2779,8 +2898,7 @@ static int hpsa_get_pdisk_of_ioaccel2(struct ctlr_info *h,
physicals = kzalloc(reportsize, GFP_KERNEL);
if (physicals == NULL)
return 0;
- if (hpsa_scsi_do_report_phys_luns(h, (struct ReportLUNdata *) physicals,
- reportsize, extended)) {
+ if (hpsa_scsi_do_report_phys_luns(h, physicals, reportsize)) {
dev_err(&h->pdev->dev,
"Can't lookup %s device handle: report physical LUNs failed.\n",
"HP SSD Smart Path");
@@ -2821,34 +2939,20 @@ static int hpsa_get_pdisk_of_ioaccel2(struct ctlr_info *h,
* Returns 0 on success, -1 otherwise.
*/
static int hpsa_gather_lun_info(struct ctlr_info *h,
- int reportphyslunsize, int reportloglunsize,
- struct ReportLUNdata *physdev, u32 *nphysicals, int *physical_mode,
+ struct ReportExtendedLUNdata *physdev, u32 *nphysicals,
struct ReportLUNdata *logdev, u32 *nlogicals)
{
- int physical_entry_size = 8;
-
- *physical_mode = 0;
-
- /* For I/O accelerator mode we need to read physical device handles */
- if (h->transMethod & CFGTBL_Trans_io_accel1 ||
- h->transMethod & CFGTBL_Trans_io_accel2) {
- *physical_mode = HPSA_REPORT_PHYS_EXTENDED;
- physical_entry_size = 24;
- }
- if (hpsa_scsi_do_report_phys_luns(h, physdev, reportphyslunsize,
- *physical_mode)) {
+ if (hpsa_scsi_do_report_phys_luns(h, physdev, sizeof(*physdev))) {
dev_err(&h->pdev->dev, "report physical LUNs failed.\n");
return -1;
}
- *nphysicals = be32_to_cpu(*((__be32 *)physdev->LUNListLength)) /
- physical_entry_size;
+ *nphysicals = be32_to_cpu(*((__be32 *)physdev->LUNListLength)) / 24;
if (*nphysicals > HPSA_MAX_PHYS_LUN) {
- dev_warn(&h->pdev->dev, "maximum physical LUNs (%d) exceeded."
- " %d LUNs ignored.\n", HPSA_MAX_PHYS_LUN,
- *nphysicals - HPSA_MAX_PHYS_LUN);
+ dev_warn(&h->pdev->dev, "maximum physical LUNs (%d) exceeded. %d LUNs ignored.\n",
+ HPSA_MAX_PHYS_LUN, *nphysicals - HPSA_MAX_PHYS_LUN);
*nphysicals = HPSA_MAX_PHYS_LUN;
}
- if (hpsa_scsi_do_report_log_luns(h, logdev, reportloglunsize)) {
+ if (hpsa_scsi_do_report_log_luns(h, logdev, sizeof(*logdev))) {
dev_err(&h->pdev->dev, "report logical LUNs failed.\n");
return -1;
}
@@ -2921,6 +3025,33 @@ static int hpsa_hba_mode_enabled(struct ctlr_info *h)
return hba_mode_enabled;
}
+/* get physical drive ioaccel handle and queue depth */
+static void hpsa_get_ioaccel_drive_info(struct ctlr_info *h,
+ struct hpsa_scsi_dev_t *dev,
+ u8 *lunaddrbytes,
+ struct bmic_identify_physical_device *id_phys)
+{
+ int rc;
+ struct ext_report_lun_entry *rle =
+ (struct ext_report_lun_entry *) lunaddrbytes;
+
+ dev->ioaccel_handle = rle->ioaccel_handle;
+ memset(id_phys, 0, sizeof(*id_phys));
+ rc = hpsa_bmic_id_physical_device(h, lunaddrbytes,
+ GET_BMIC_DRIVE_NUMBER(lunaddrbytes), id_phys,
+ sizeof(*id_phys));
+ if (!rc)
+ /* Reserve space for FW operations */
+#define DRIVE_CMDS_RESERVED_FOR_FW 2
+#define DRIVE_QUEUE_DEPTH 7
+ dev->queue_depth =
+ le16_to_cpu(id_phys->current_queue_depth_limit) -
+ DRIVE_CMDS_RESERVED_FOR_FW;
+ else
+ dev->queue_depth = DRIVE_QUEUE_DEPTH; /* conservative */
+ atomic_set(&dev->ioaccel_cmds_out, 0);
+}
+
static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno)
{
/* the idea here is we could get notified
@@ -2935,9 +3066,9 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno)
*/
struct ReportExtendedLUNdata *physdev_list = NULL;
struct ReportLUNdata *logdev_list = NULL;
+ struct bmic_identify_physical_device *id_phys = NULL;
u32 nphysicals = 0;
u32 nlogicals = 0;
- int physical_mode = 0;
u32 ndev_allocated = 0;
struct hpsa_scsi_dev_t **currentsd, *this_device, *tmpdevice;
int ncurrent = 0;
@@ -2950,8 +3081,10 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno)
physdev_list = kzalloc(sizeof(*physdev_list), GFP_KERNEL);
logdev_list = kzalloc(sizeof(*logdev_list), GFP_KERNEL);
tmpdevice = kzalloc(sizeof(*tmpdevice), GFP_KERNEL);
+ id_phys = kzalloc(sizeof(*id_phys), GFP_KERNEL);
- if (!currentsd || !physdev_list || !logdev_list || !tmpdevice) {
+ if (!currentsd || !physdev_list || !logdev_list ||
+ !tmpdevice || !id_phys) {
dev_err(&h->pdev->dev, "out of memory\n");
goto out;
}
@@ -2968,10 +3101,8 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno)
h->hba_mode_enabled = rescan_hba_mode;
- if (hpsa_gather_lun_info(h,
- sizeof(*physdev_list), sizeof(*logdev_list),
- (struct ReportLUNdata *) physdev_list, &nphysicals,
- &physical_mode, logdev_list, &nlogicals))
+ if (hpsa_gather_lun_info(h, physdev_list, &nphysicals,
+ logdev_list, &nlogicals))
goto out;
/* We might see up to the maximum number of logical and physical disks
@@ -3068,10 +3199,11 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno)
ncurrent++;
break;
}
- if (physical_mode == HPSA_REPORT_PHYS_EXTENDED) {
- memcpy(&this_device->ioaccel_handle,
- &lunaddrbytes[20],
- sizeof(this_device->ioaccel_handle));
+ if (h->transMethod & CFGTBL_Trans_io_accel1 ||
+ h->transMethod & CFGTBL_Trans_io_accel2) {
+ hpsa_get_ioaccel_drive_info(h, this_device,
+ lunaddrbytes, id_phys);
+ atomic_set(&this_device->ioaccel_cmds_out, 0);
ncurrent++;
}
break;
@@ -3095,6 +3227,7 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno)
if (ncurrent >= HPSA_MAX_DEVICES)
break;
}
+ hpsa_update_log_drive_phys_drive_ptrs(h, currentsd, ncurrent);
adjust_hpsa_scsi_table(h, hostno, currentsd, ncurrent);
out:
kfree(tmpdevice);
@@ -3103,9 +3236,22 @@ out:
kfree(currentsd);
kfree(physdev_list);
kfree(logdev_list);
+ kfree(id_phys);
}
-/* hpsa_scatter_gather takes a struct scsi_cmnd, (cmd), and does the pci
+static void hpsa_set_sg_descriptor(struct SGDescriptor *desc,
+ struct scatterlist *sg)
+{
+ u64 addr64 = (u64) sg_dma_address(sg);
+ unsigned int len = sg_dma_len(sg);
+
+ desc->Addr = cpu_to_le64(addr64);
+ desc->Len = cpu_to_le32(len);
+ desc->Ext = 0;
+}
+
+/*
+ * hpsa_scatter_gather takes a struct scsi_cmnd, (cmd), and does the pci
* dma mapping and fills in the scatter gather entries of the
* hpsa command, cp.
*/
@@ -3113,9 +3259,7 @@ static int hpsa_scatter_gather(struct ctlr_info *h,
struct CommandList *cp,
struct scsi_cmnd *cmd)
{
- unsigned int len;
struct scatterlist *sg;
- u64 addr64;
int use_sg, i, sg_index, chained;
struct SGDescriptor *curr_sg;
@@ -3138,13 +3282,11 @@ static int hpsa_scatter_gather(struct ctlr_info *h,
curr_sg = h->cmd_sg_list[cp->cmdindex];
sg_index = 0;
}
- addr64 = (u64) sg_dma_address(sg);
- len = sg_dma_len(sg);
- curr_sg->Addr = cpu_to_le64(addr64);
- curr_sg->Len = cpu_to_le32(len);
- curr_sg->Ext = cpu_to_le32(0);
+ hpsa_set_sg_descriptor(curr_sg, sg);
curr_sg++;
}
+
+ /* Back the pointer up to the last entry and mark it as "last". */
(--curr_sg)->Ext = cpu_to_le32(HPSA_SG_LAST);
if (use_sg + chained > h->maxSG)
@@ -3163,7 +3305,7 @@ static int hpsa_scatter_gather(struct ctlr_info *h,
sglist_finished:
cp->Header.SGList = (u8) use_sg; /* no. SGs contig in this cmd */
- cp->Header.SGTotal = cpu_to_le16(use_sg); /* total sgs in this cmd list */
+ cp->Header.SGTotal = cpu_to_le16(use_sg); /* total sgs in cmd list */
return 0;
}
@@ -3217,7 +3359,7 @@ static int fixup_ioaccel_cdb(u8 *cdb, int *cdb_len)
static int hpsa_scsi_ioaccel1_queue_command(struct ctlr_info *h,
struct CommandList *c, u32 ioaccel_handle, u8 *cdb, int cdb_len,
- u8 *scsi3addr)
+ u8 *scsi3addr, struct hpsa_scsi_dev_t *phys_disk)
{
struct scsi_cmnd *cmd = c->scsi_cmd;
struct io_accel1_cmd *cp = &h->ioaccel_cmd_pool[c->cmdindex];
@@ -3230,13 +3372,17 @@ static int hpsa_scsi_ioaccel1_queue_command(struct ctlr_info *h,
u32 control = IOACCEL1_CONTROL_SIMPLEQUEUE;
/* TODO: implement chaining support */
- if (scsi_sg_count(cmd) > h->ioaccel_maxsg)
+ if (scsi_sg_count(cmd) > h->ioaccel_maxsg) {
+ atomic_dec(&phys_disk->ioaccel_cmds_out);
return IO_ACCEL_INELIGIBLE;
+ }
BUG_ON(cmd->cmd_len > IOACCEL1_IOFLAGS_CDBLEN_MAX);
- if (fixup_ioaccel_cdb(cdb, &cdb_len))
+ if (fixup_ioaccel_cdb(cdb, &cdb_len)) {
+ atomic_dec(&phys_disk->ioaccel_cmds_out);
return IO_ACCEL_INELIGIBLE;
+ }
c->cmd_type = CMD_IOACCEL1;
@@ -3246,8 +3392,10 @@ static int hpsa_scsi_ioaccel1_queue_command(struct ctlr_info *h,
BUG_ON(c->busaddr & 0x0000007F);
use_sg = scsi_dma_map(cmd);
- if (use_sg < 0)
+ if (use_sg < 0) {
+ atomic_dec(&phys_disk->ioaccel_cmds_out);
return use_sg;
+ }
if (use_sg) {
curr_sg = cp->SG;
@@ -3284,11 +3432,11 @@ static int hpsa_scsi_ioaccel1_queue_command(struct ctlr_info *h,
c->Header.SGList = use_sg;
/* Fill out the command structure to submit */
- cp->dev_handle = ioaccel_handle & 0xFFFF;
- cp->transfer_len = total_len;
- cp->io_flags = IOACCEL1_IOFLAGS_IO_REQ |
- (cdb_len & IOACCEL1_IOFLAGS_CDBLEN_MASK);
- cp->control = control;
+ cp->dev_handle = cpu_to_le16(ioaccel_handle & 0xFFFF);
+ cp->transfer_len = cpu_to_le32(total_len);
+ cp->io_flags = cpu_to_le16(IOACCEL1_IOFLAGS_IO_REQ |
+ (cdb_len & IOACCEL1_IOFLAGS_CDBLEN_MASK));
+ cp->control = cpu_to_le32(control);
memcpy(cp->CDB, cdb, cdb_len);
memcpy(cp->CISS_LUN, scsi3addr, 8);
/* Tag was already set at init time. */
@@ -3306,8 +3454,10 @@ static int hpsa_scsi_ioaccel_direct_map(struct ctlr_info *h,
struct scsi_cmnd *cmd = c->scsi_cmd;
struct hpsa_scsi_dev_t *dev = cmd->device->hostdata;
+ c->phys_disk = dev;
+
return hpsa_scsi_ioaccel_queue_command(h, c, dev->ioaccel_handle,
- cmd->cmnd, cmd->cmd_len, dev->scsi3addr);
+ cmd->cmnd, cmd->cmd_len, dev->scsi3addr, dev);
}
/*
@@ -3321,10 +3471,8 @@ static void set_encrypt_ioaccel2(struct ctlr_info *h,
struct raid_map_data *map = &dev->raid_map;
u64 first_block;
- BUG_ON(!(dev->offload_config && dev->offload_enabled));
-
/* Are we doing encryption on this device */
- if (!(map->flags & RAID_MAP_FLAG_ENCRYPT_ON))
+ if (!(le16_to_cpu(map->flags) & RAID_MAP_FLAG_ENCRYPT_ON))
return;
/* Set the data encryption key index. */
cp->dekindex = map->dekindex;
@@ -3340,101 +3488,38 @@ static void set_encrypt_ioaccel2(struct ctlr_info *h,
/* Required? 6-byte cdbs eliminated by fixup_ioaccel_cdb */
case WRITE_6:
case READ_6:
- if (map->volume_blk_size == 512) {
- cp->tweak_lower =
- (((u32) cmd->cmnd[2]) << 8) |
- cmd->cmnd[3];
- cp->tweak_upper = 0;
- } else {
- first_block =
- (((u64) cmd->cmnd[2]) << 8) |
- cmd->cmnd[3];
- first_block = (first_block * map->volume_blk_size)/512;
- cp->tweak_lower = (u32)first_block;
- cp->tweak_upper = (u32)(first_block >> 32);
- }
+ first_block = get_unaligned_be16(&cmd->cmnd[2]);
break;
case WRITE_10:
case READ_10:
- if (map->volume_blk_size == 512) {
- cp->tweak_lower =
- (((u32) cmd->cmnd[2]) << 24) |
- (((u32) cmd->cmnd[3]) << 16) |
- (((u32) cmd->cmnd[4]) << 8) |
- cmd->cmnd[5];
- cp->tweak_upper = 0;
- } else {
- first_block =
- (((u64) cmd->cmnd[2]) << 24) |
- (((u64) cmd->cmnd[3]) << 16) |
- (((u64) cmd->cmnd[4]) << 8) |
- cmd->cmnd[5];
- first_block = (first_block * map->volume_blk_size)/512;
- cp->tweak_lower = (u32)first_block;
- cp->tweak_upper = (u32)(first_block >> 32);
- }
- break;
/* Required? 12-byte cdbs eliminated by fixup_ioaccel_cdb */
case WRITE_12:
case READ_12:
- if (map->volume_blk_size == 512) {
- cp->tweak_lower =
- (((u32) cmd->cmnd[2]) << 24) |
- (((u32) cmd->cmnd[3]) << 16) |
- (((u32) cmd->cmnd[4]) << 8) |
- cmd->cmnd[5];
- cp->tweak_upper = 0;
- } else {
- first_block =
- (((u64) cmd->cmnd[2]) << 24) |
- (((u64) cmd->cmnd[3]) << 16) |
- (((u64) cmd->cmnd[4]) << 8) |
- cmd->cmnd[5];
- first_block = (first_block * map->volume_blk_size)/512;
- cp->tweak_lower = (u32)first_block;
- cp->tweak_upper = (u32)(first_block >> 32);
- }
+ first_block = get_unaligned_be32(&cmd->cmnd[2]);
break;
case WRITE_16:
case READ_16:
- if (map->volume_blk_size == 512) {
- cp->tweak_lower =
- (((u32) cmd->cmnd[6]) << 24) |
- (((u32) cmd->cmnd[7]) << 16) |
- (((u32) cmd->cmnd[8]) << 8) |
- cmd->cmnd[9];
- cp->tweak_upper =
- (((u32) cmd->cmnd[2]) << 24) |
- (((u32) cmd->cmnd[3]) << 16) |
- (((u32) cmd->cmnd[4]) << 8) |
- cmd->cmnd[5];
- } else {
- first_block =
- (((u64) cmd->cmnd[2]) << 56) |
- (((u64) cmd->cmnd[3]) << 48) |
- (((u64) cmd->cmnd[4]) << 40) |
- (((u64) cmd->cmnd[5]) << 32) |
- (((u64) cmd->cmnd[6]) << 24) |
- (((u64) cmd->cmnd[7]) << 16) |
- (((u64) cmd->cmnd[8]) << 8) |
- cmd->cmnd[9];
- first_block = (first_block * map->volume_blk_size)/512;
- cp->tweak_lower = (u32)first_block;
- cp->tweak_upper = (u32)(first_block >> 32);
- }
+ first_block = get_unaligned_be64(&cmd->cmnd[2]);
break;
default:
dev_err(&h->pdev->dev,
- "ERROR: %s: IOACCEL request CDB size not supported for encryption\n",
- __func__);
+ "ERROR: %s: size (0x%x) not supported for encryption\n",
+ __func__, cmd->cmnd[0]);
BUG();
break;
}
+
+ if (le32_to_cpu(map->volume_blk_size) != 512)
+ first_block = first_block *
+ le32_to_cpu(map->volume_blk_size)/512;
+
+ cp->tweak_lower = cpu_to_le32(first_block);
+ cp->tweak_upper = cpu_to_le32(first_block >> 32);
}
static int hpsa_scsi_ioaccel2_queue_command(struct ctlr_info *h,
struct CommandList *c, u32 ioaccel_handle, u8 *cdb, int cdb_len,
- u8 *scsi3addr)
+ u8 *scsi3addr, struct hpsa_scsi_dev_t *phys_disk)
{
struct scsi_cmnd *cmd = c->scsi_cmd;
struct io_accel2_cmd *cp = &h->ioaccel2_cmd_pool[c->cmdindex];
@@ -3445,11 +3530,16 @@ static int hpsa_scsi_ioaccel2_queue_command(struct ctlr_info *h,
u32 len;
u32 total_len = 0;
- if (scsi_sg_count(cmd) > h->ioaccel_maxsg)
+ if (scsi_sg_count(cmd) > h->ioaccel_maxsg) {
+ atomic_dec(&phys_disk->ioaccel_cmds_out);
return IO_ACCEL_INELIGIBLE;
+ }
- if (fixup_ioaccel_cdb(cdb, &cdb_len))
+ if (fixup_ioaccel_cdb(cdb, &cdb_len)) {
+ atomic_dec(&phys_disk->ioaccel_cmds_out);
return IO_ACCEL_INELIGIBLE;
+ }
+
c->cmd_type = CMD_IOACCEL2;
/* Adjust the DMA address to point to the accelerated command buffer */
c->busaddr = (u32) h->ioaccel2_cmd_pool_dhandle +
@@ -3460,8 +3550,10 @@ static int hpsa_scsi_ioaccel2_queue_command(struct ctlr_info *h,
cp->IU_type = IOACCEL2_IU_TYPE;
use_sg = scsi_dma_map(cmd);
- if (use_sg < 0)
+ if (use_sg < 0) {
+ atomic_dec(&phys_disk->ioaccel_cmds_out);
return use_sg;
+ }
if (use_sg) {
BUG_ON(use_sg > IOACCEL2_MAXSGENTRIES);
@@ -3506,9 +3598,8 @@ static int hpsa_scsi_ioaccel2_queue_command(struct ctlr_info *h,
/* Set encryption parameters, if necessary */
set_encrypt_ioaccel2(h, c, cp);
- cp->scsi_nexus = ioaccel_handle;
- cp->Tag = (c->cmdindex << DIRECT_LOOKUP_SHIFT) |
- DIRECT_LOOKUP_BIT;
+ cp->scsi_nexus = cpu_to_le32(ioaccel_handle);
+ cp->Tag = cpu_to_le32(c->cmdindex << DIRECT_LOOKUP_SHIFT);
memcpy(cp->cdb, cdb, sizeof(cp->cdb));
/* fill in sg elements */
@@ -3528,14 +3619,22 @@ static int hpsa_scsi_ioaccel2_queue_command(struct ctlr_info *h,
*/
static int hpsa_scsi_ioaccel_queue_command(struct ctlr_info *h,
struct CommandList *c, u32 ioaccel_handle, u8 *cdb, int cdb_len,
- u8 *scsi3addr)
+ u8 *scsi3addr, struct hpsa_scsi_dev_t *phys_disk)
{
+ /* Try to honor the device's queue depth */
+ if (atomic_inc_return(&phys_disk->ioaccel_cmds_out) >
+ phys_disk->queue_depth) {
+ atomic_dec(&phys_disk->ioaccel_cmds_out);
+ return IO_ACCEL_INELIGIBLE;
+ }
if (h->transMethod & CFGTBL_Trans_io_accel1)
return hpsa_scsi_ioaccel1_queue_command(h, c, ioaccel_handle,
- cdb, cdb_len, scsi3addr);
+ cdb, cdb_len, scsi3addr,
+ phys_disk);
else
return hpsa_scsi_ioaccel2_queue_command(h, c, ioaccel_handle,
- cdb, cdb_len, scsi3addr);
+ cdb, cdb_len, scsi3addr,
+ phys_disk);
}
static void raid_map_helper(struct raid_map_data *map,
@@ -3543,21 +3642,22 @@ static void raid_map_helper(struct raid_map_data *map,
{
if (offload_to_mirror == 0) {
/* use physical disk in the first mirrored group. */
- *map_index %= map->data_disks_per_row;
+ *map_index %= le16_to_cpu(map->data_disks_per_row);
return;
}
do {
/* determine mirror group that *map_index indicates */
- *current_group = *map_index / map->data_disks_per_row;
+ *current_group = *map_index /
+ le16_to_cpu(map->data_disks_per_row);
if (offload_to_mirror == *current_group)
continue;
- if (*current_group < (map->layout_map_count - 1)) {
+ if (*current_group < le16_to_cpu(map->layout_map_count) - 1) {
/* select map index from next group */
- *map_index += map->data_disks_per_row;
+ *map_index += le16_to_cpu(map->data_disks_per_row);
(*current_group)++;
} else {
/* select map index from first group */
- *map_index %= map->data_disks_per_row;
+ *map_index %= le16_to_cpu(map->data_disks_per_row);
*current_group = 0;
}
} while (offload_to_mirror != *current_group);
@@ -3595,13 +3695,12 @@ static int hpsa_scsi_ioaccel_raid_map(struct ctlr_info *h,
u32 disk_block_cnt;
u8 cdb[16];
u8 cdb_len;
+ u16 strip_size;
#if BITS_PER_LONG == 32
u64 tmpdiv;
#endif
int offload_to_mirror;
- BUG_ON(!(dev->offload_config && dev->offload_enabled));
-
/* check for valid opcode, get LBA and block count */
switch (cmd->cmnd[0]) {
case WRITE_6:
@@ -3668,11 +3767,14 @@ static int hpsa_scsi_ioaccel_raid_map(struct ctlr_info *h,
return IO_ACCEL_INELIGIBLE;
/* check for invalid block or wraparound */
- if (last_block >= map->volume_blk_cnt || last_block < first_block)
+ if (last_block >= le64_to_cpu(map->volume_blk_cnt) ||
+ last_block < first_block)
return IO_ACCEL_INELIGIBLE;
/* calculate stripe information for the request */
- blocks_per_row = map->data_disks_per_row * map->strip_size;
+ blocks_per_row = le16_to_cpu(map->data_disks_per_row) *
+ le16_to_cpu(map->strip_size);
+ strip_size = le16_to_cpu(map->strip_size);
#if BITS_PER_LONG == 32
tmpdiv = first_block;
(void) do_div(tmpdiv, blocks_per_row);
@@ -3683,18 +3785,18 @@ static int hpsa_scsi_ioaccel_raid_map(struct ctlr_info *h,
first_row_offset = (u32) (first_block - (first_row * blocks_per_row));
last_row_offset = (u32) (last_block - (last_row * blocks_per_row));
tmpdiv = first_row_offset;
- (void) do_div(tmpdiv, map->strip_size);
+ (void) do_div(tmpdiv, strip_size);
first_column = tmpdiv;
tmpdiv = last_row_offset;
- (void) do_div(tmpdiv, map->strip_size);
+ (void) do_div(tmpdiv, strip_size);
last_column = tmpdiv;
#else
first_row = first_block / blocks_per_row;
last_row = last_block / blocks_per_row;
first_row_offset = (u32) (first_block - (first_row * blocks_per_row));
last_row_offset = (u32) (last_block - (last_row * blocks_per_row));
- first_column = first_row_offset / map->strip_size;
- last_column = last_row_offset / map->strip_size;
+ first_column = first_row_offset / strip_size;
+ last_column = last_row_offset / strip_size;
#endif
/* if this isn't a single row/column then give to the controller */
@@ -3702,10 +3804,10 @@ static int hpsa_scsi_ioaccel_raid_map(struct ctlr_info *h,
return IO_ACCEL_INELIGIBLE;
/* proceeding with driver mapping */
- total_disks_per_row = map->data_disks_per_row +
- map->metadata_disks_per_row;
+ total_disks_per_row = le16_to_cpu(map->data_disks_per_row) +
+ le16_to_cpu(map->metadata_disks_per_row);
map_row = ((u32)(first_row >> map->parity_rotation_shift)) %
- map->row_cnt;
+ le16_to_cpu(map->row_cnt);
map_index = (map_row * total_disks_per_row) + first_column;
switch (dev->raid_level) {
@@ -3716,23 +3818,24 @@ static int hpsa_scsi_ioaccel_raid_map(struct ctlr_info *h,
* (2-drive R1 and R10 with even # of drives.)
* Appropriate for SSDs, not optimal for HDDs
*/
- BUG_ON(map->layout_map_count != 2);
+ BUG_ON(le16_to_cpu(map->layout_map_count) != 2);
if (dev->offload_to_mirror)
- map_index += map->data_disks_per_row;
+ map_index += le16_to_cpu(map->data_disks_per_row);
dev->offload_to_mirror = !dev->offload_to_mirror;
break;
case HPSA_RAID_ADM:
/* Handles N-way mirrors (R1-ADM)
* and R10 with # of drives divisible by 3.)
*/
- BUG_ON(map->layout_map_count != 3);
+ BUG_ON(le16_to_cpu(map->layout_map_count) != 3);
offload_to_mirror = dev->offload_to_mirror;
raid_map_helper(map, offload_to_mirror,
&map_index, &current_group);
/* set mirror group to use next time */
offload_to_mirror =
- (offload_to_mirror >= map->layout_map_count - 1)
+ (offload_to_mirror >=
+ le16_to_cpu(map->layout_map_count) - 1)
? 0 : offload_to_mirror + 1;
dev->offload_to_mirror = offload_to_mirror;
/* Avoid direct use of dev->offload_to_mirror within this
@@ -3742,14 +3845,16 @@ static int hpsa_scsi_ioaccel_raid_map(struct ctlr_info *h,
break;
case HPSA_RAID_5:
case HPSA_RAID_6:
- if (map->layout_map_count <= 1)
+ if (le16_to_cpu(map->layout_map_count) <= 1)
break;
/* Verify first and last block are in same RAID group */
r5or6_blocks_per_row =
- map->strip_size * map->data_disks_per_row;
+ le16_to_cpu(map->strip_size) *
+ le16_to_cpu(map->data_disks_per_row);
BUG_ON(r5or6_blocks_per_row == 0);
- stripesize = r5or6_blocks_per_row * map->layout_map_count;
+ stripesize = r5or6_blocks_per_row *
+ le16_to_cpu(map->layout_map_count);
#if BITS_PER_LONG == 32
tmpdiv = first_block;
first_group = do_div(tmpdiv, stripesize);
@@ -3812,28 +3917,35 @@ static int hpsa_scsi_ioaccel_raid_map(struct ctlr_info *h,
r5or6_blocks_per_row);
first_column = r5or6_first_column =
- r5or6_first_row_offset / map->strip_size;
+ r5or6_first_row_offset / le16_to_cpu(map->strip_size);
r5or6_last_column =
- r5or6_last_row_offset / map->strip_size;
+ r5or6_last_row_offset / le16_to_cpu(map->strip_size);
#endif
if (r5or6_first_column != r5or6_last_column)
return IO_ACCEL_INELIGIBLE;
/* Request is eligible */
map_row = ((u32)(first_row >> map->parity_rotation_shift)) %
- map->row_cnt;
+ le16_to_cpu(map->row_cnt);
map_index = (first_group *
- (map->row_cnt * total_disks_per_row)) +
+ (le16_to_cpu(map->row_cnt) * total_disks_per_row)) +
(map_row * total_disks_per_row) + first_column;
break;
default:
return IO_ACCEL_INELIGIBLE;
}
+ if (unlikely(map_index >= RAID_MAP_MAX_ENTRIES))
+ return IO_ACCEL_INELIGIBLE;
+
+ c->phys_disk = dev->phys_disk[map_index];
+
disk_handle = dd[map_index].ioaccel_handle;
- disk_block = map->disk_starting_blk + (first_row * map->strip_size) +
- (first_row_offset - (first_column * map->strip_size));
+ disk_block = le64_to_cpu(map->disk_starting_blk) +
+ first_row * le16_to_cpu(map->strip_size) +
+ (first_row_offset - first_column *
+ le16_to_cpu(map->strip_size));
disk_block_cnt = block_cnt;
/* handle differing logical/physical block sizes */
@@ -3876,78 +3988,21 @@ static int hpsa_scsi_ioaccel_raid_map(struct ctlr_info *h,
cdb_len = 10;
}
return hpsa_scsi_ioaccel_queue_command(h, c, disk_handle, cdb, cdb_len,
- dev->scsi3addr);
+ dev->scsi3addr,
+ dev->phys_disk[map_index]);
}
-/*
- * Running in struct Scsi_Host->host_lock less mode using LLD internal
- * struct ctlr_info *h->lock w/ spin_lock_irqsave() protection.
- */
-static int hpsa_scsi_queue_command(struct Scsi_Host *sh, struct scsi_cmnd *cmd)
+/* Submit commands down the "normal" RAID stack path */
+static int hpsa_ciss_submit(struct ctlr_info *h,
+ struct CommandList *c, struct scsi_cmnd *cmd,
+ unsigned char scsi3addr[])
{
- struct ctlr_info *h;
- struct hpsa_scsi_dev_t *dev;
- unsigned char scsi3addr[8];
- struct CommandList *c;
- int rc = 0;
-
- /* Get the ptr to our adapter structure out of cmd->host. */
- h = sdev_to_hba(cmd->device);
- dev = cmd->device->hostdata;
- if (!dev) {
- cmd->result = DID_NO_CONNECT << 16;
- cmd->scsi_done(cmd);
- return 0;
- }
- memcpy(scsi3addr, dev->scsi3addr, sizeof(scsi3addr));
-
- if (unlikely(lockup_detected(h))) {
- cmd->result = DID_ERROR << 16;
- cmd->scsi_done(cmd);
- return 0;
- }
- c = cmd_alloc(h);
- if (c == NULL) { /* trouble... */
- dev_err(&h->pdev->dev, "cmd_alloc returned NULL!\n");
- return SCSI_MLQUEUE_HOST_BUSY;
- }
-
- /* Fill in the command list header */
- /* save c in case we have to abort it */
cmd->host_scribble = (unsigned char *) c;
-
c->cmd_type = CMD_SCSI;
c->scsi_cmd = cmd;
-
- /* Call alternate submit routine for I/O accelerated commands.
- * Retries always go down the normal I/O path.
- */
- if (likely(cmd->retries == 0 &&
- cmd->request->cmd_type == REQ_TYPE_FS &&
- h->acciopath_status)) {
- if (dev->offload_enabled) {
- rc = hpsa_scsi_ioaccel_raid_map(h, c);
- if (rc == 0)
- return 0; /* Sent on ioaccel path */
- if (rc < 0) { /* scsi_dma_map failed. */
- cmd_free(h, c);
- return SCSI_MLQUEUE_HOST_BUSY;
- }
- } else if (dev->ioaccel_handle) {
- rc = hpsa_scsi_ioaccel_direct_map(h, c);
- if (rc == 0)
- return 0; /* Sent on direct map path */
- if (rc < 0) { /* scsi_dma_map failed. */
- cmd_free(h, c);
- return SCSI_MLQUEUE_HOST_BUSY;
- }
- }
- }
-
c->Header.ReplyQueue = 0; /* unused in simple mode */
memcpy(&c->Header.LUN.LunAddrBytes[0], &scsi3addr[0], 8);
- c->Header.tag = cpu_to_le64((c->cmdindex << DIRECT_LOOKUP_SHIFT) |
- DIRECT_LOOKUP_BIT);
+ c->Header.tag = cpu_to_le64((c->cmdindex << DIRECT_LOOKUP_SHIFT));
/* Fill in the request block... */
@@ -4003,25 +4058,108 @@ static int hpsa_scsi_queue_command(struct Scsi_Host *sh, struct scsi_cmnd *cmd)
return 0;
}
-static int do_not_scan_if_controller_locked_up(struct ctlr_info *h)
+static void hpsa_command_resubmit_worker(struct work_struct *work)
{
- unsigned long flags;
+ struct scsi_cmnd *cmd;
+ struct hpsa_scsi_dev_t *dev;
+ struct CommandList *c =
+ container_of(work, struct CommandList, work);
+
+ cmd = c->scsi_cmd;
+ dev = cmd->device->hostdata;
+ if (!dev) {
+ cmd->result = DID_NO_CONNECT << 16;
+ cmd->scsi_done(cmd);
+ return;
+ }
+ if (hpsa_ciss_submit(c->h, c, cmd, dev->scsi3addr)) {
+ /*
+ * If we get here, it means dma mapping failed. Try
+ * again via scsi mid layer, which will then get
+ * SCSI_MLQUEUE_HOST_BUSY.
+ */
+ cmd->result = DID_IMM_RETRY << 16;
+ cmd->scsi_done(cmd);
+ }
+}
+
+/* Running in struct Scsi_Host->host_lock less mode */
+static int hpsa_scsi_queue_command(struct Scsi_Host *sh, struct scsi_cmnd *cmd)
+{
+ struct ctlr_info *h;
+ struct hpsa_scsi_dev_t *dev;
+ unsigned char scsi3addr[8];
+ struct CommandList *c;
+ int rc = 0;
+
+ /* Get the ptr to our adapter structure out of cmd->host. */
+ h = sdev_to_hba(cmd->device);
+ dev = cmd->device->hostdata;
+ if (!dev) {
+ cmd->result = DID_NO_CONNECT << 16;
+ cmd->scsi_done(cmd);
+ return 0;
+ }
+ memcpy(scsi3addr, dev->scsi3addr, sizeof(scsi3addr));
+
+ if (unlikely(lockup_detected(h))) {
+ cmd->result = DID_ERROR << 16;
+ cmd->scsi_done(cmd);
+ return 0;
+ }
+ c = cmd_alloc(h);
+ if (c == NULL) { /* trouble... */
+ dev_err(&h->pdev->dev, "cmd_alloc returned NULL!\n");
+ return SCSI_MLQUEUE_HOST_BUSY;
+ }
+ if (unlikely(lockup_detected(h))) {
+ cmd->result = DID_ERROR << 16;
+ cmd_free(h, c);
+ cmd->scsi_done(cmd);
+ return 0;
+ }
/*
- * Don't let rescans be initiated on a controller known
- * to be locked up. If the controller locks up *during*
- * a rescan, that thread is probably hosed, but at least
- * we can prevent new rescan threads from piling up on a
- * locked up controller.
+ * Call alternate submit routine for I/O accelerated commands.
+ * Retries always go down the normal I/O path.
*/
- if (unlikely(lockup_detected(h))) {
- spin_lock_irqsave(&h->scan_lock, flags);
- h->scan_finished = 1;
- wake_up_all(&h->scan_wait_queue);
- spin_unlock_irqrestore(&h->scan_lock, flags);
- return 1;
+ if (likely(cmd->retries == 0 &&
+ cmd->request->cmd_type == REQ_TYPE_FS &&
+ h->acciopath_status)) {
+
+ cmd->host_scribble = (unsigned char *) c;
+ c->cmd_type = CMD_SCSI;
+ c->scsi_cmd = cmd;
+
+ if (dev->offload_enabled) {
+ rc = hpsa_scsi_ioaccel_raid_map(h, c);
+ if (rc == 0)
+ return 0; /* Sent on ioaccel path */
+ if (rc < 0) { /* scsi_dma_map failed. */
+ cmd_free(h, c);
+ return SCSI_MLQUEUE_HOST_BUSY;
+ }
+ } else if (dev->ioaccel_handle) {
+ rc = hpsa_scsi_ioaccel_direct_map(h, c);
+ if (rc == 0)
+ return 0; /* Sent on direct map path */
+ if (rc < 0) { /* scsi_dma_map failed. */
+ cmd_free(h, c);
+ return SCSI_MLQUEUE_HOST_BUSY;
+ }
+ }
}
- return 0;
+ return hpsa_ciss_submit(h, c, cmd, scsi3addr);
+}
+
+static void hpsa_scan_complete(struct ctlr_info *h)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&h->scan_lock, flags);
+ h->scan_finished = 1;
+ wake_up_all(&h->scan_wait_queue);
+ spin_unlock_irqrestore(&h->scan_lock, flags);
}
static void hpsa_scan_start(struct Scsi_Host *sh)
@@ -4029,8 +4167,14 @@ static void hpsa_scan_start(struct Scsi_Host *sh)
struct ctlr_info *h = shost_to_hba(sh);
unsigned long flags;
- if (do_not_scan_if_controller_locked_up(h))
- return;
+ /*
+ * Don't let rescans be initiated on a controller known to be locked
+ * up. If the controller locks up *during* a rescan, that thread is
+ * probably hosed, but at least we can prevent new rescan threads from
+ * piling up on a locked up controller.
+ */
+ if (unlikely(lockup_detected(h)))
+ return hpsa_scan_complete(h);
/* wait until any scan already in progress is finished. */
while (1) {
@@ -4048,15 +4192,27 @@ static void hpsa_scan_start(struct Scsi_Host *sh)
h->scan_finished = 0; /* mark scan as in progress */
spin_unlock_irqrestore(&h->scan_lock, flags);
- if (do_not_scan_if_controller_locked_up(h))
- return;
+ if (unlikely(lockup_detected(h)))
+ return hpsa_scan_complete(h);
hpsa_update_scsi_devices(h, h->scsi_host->host_no);
- spin_lock_irqsave(&h->scan_lock, flags);
- h->scan_finished = 1; /* mark scan as finished. */
- wake_up_all(&h->scan_wait_queue);
- spin_unlock_irqrestore(&h->scan_lock, flags);
+ hpsa_scan_complete(h);
+}
+
+static int hpsa_change_queue_depth(struct scsi_device *sdev, int qdepth)
+{
+ struct hpsa_scsi_dev_t *logical_drive = sdev->hostdata;
+
+ if (!logical_drive)
+ return -ENODEV;
+
+ if (qdepth < 1)
+ qdepth = 1;
+ else if (qdepth > logical_drive->queue_depth)
+ qdepth = logical_drive->queue_depth;
+
+ return scsi_change_queue_depth(sdev, qdepth);
}
static int hpsa_scan_finished(struct Scsi_Host *sh,
@@ -4096,11 +4252,11 @@ static int hpsa_register_scsi(struct ctlr_info *h)
sh->max_cmd_len = MAX_COMMAND_SIZE;
sh->max_lun = HPSA_MAX_LUN;
sh->max_id = HPSA_MAX_LUN;
- sh->can_queue = h->nr_cmds;
- if (h->hba_mode_enabled)
- sh->cmd_per_lun = 7;
- else
- sh->cmd_per_lun = h->nr_cmds;
+ sh->can_queue = h->nr_cmds -
+ HPSA_CMDS_RESERVED_FOR_ABORTS -
+ HPSA_CMDS_RESERVED_FOR_DRIVER -
+ HPSA_MAX_CONCURRENT_PASSTHRUS;
+ sh->cmd_per_lun = sh->can_queue;
sh->sg_tablesize = h->maxsgentries;
h->scsi_host = sh;
sh->hostdata[0] = (unsigned long) h;
@@ -4131,7 +4287,7 @@ static int wait_for_device_to_become_ready(struct ctlr_info *h,
int waittime = 1; /* seconds */
struct CommandList *c;
- c = cmd_special_alloc(h);
+ c = cmd_alloc(h);
if (!c) {
dev_warn(&h->pdev->dev, "out of memory in "
"wait_for_device_to_become_ready.\n");
@@ -4177,7 +4333,7 @@ static int wait_for_device_to_become_ready(struct ctlr_info *h,
else
dev_warn(&h->pdev->dev, "device is ready.\n");
- cmd_special_free(h, c);
+ cmd_free(h, c);
return rc;
}
@@ -4194,6 +4350,10 @@ static int hpsa_eh_device_reset_handler(struct scsi_cmnd *scsicmd)
h = sdev_to_hba(scsicmd->device);
if (h == NULL) /* paranoia */
return FAILED;
+
+ if (lockup_detected(h))
+ return FAILED;
+
dev = scsicmd->device->hostdata;
if (!dev) {
dev_err(&h->pdev->dev, "hpsa_eh_device_reset_handler: "
@@ -4227,13 +4387,15 @@ static void swizzle_abort_tag(u8 *tag)
}
static void hpsa_get_tag(struct ctlr_info *h,
- struct CommandList *c, u32 *taglower, u32 *tagupper)
+ struct CommandList *c, __le32 *taglower, __le32 *tagupper)
{
+ u64 tag;
if (c->cmd_type == CMD_IOACCEL1) {
struct io_accel1_cmd *cm1 = (struct io_accel1_cmd *)
&h->ioaccel_cmd_pool[c->cmdindex];
- *tagupper = (u32) (cm1->tag >> 32);
- *taglower = (u32) (cm1->tag & 0x0ffffffffULL);
+ tag = le64_to_cpu(cm1->tag);
+ *tagupper = cpu_to_le32(tag >> 32);
+ *taglower = cpu_to_le32(tag);
return;
}
if (c->cmd_type == CMD_IOACCEL2) {
@@ -4244,8 +4406,9 @@ static void hpsa_get_tag(struct ctlr_info *h,
*taglower = cm2->Tag;
return;
}
- *tagupper = (u32) (c->Header.tag >> 32);
- *taglower = (u32) (c->Header.tag & 0x0ffffffffULL);
+ tag = le64_to_cpu(c->Header.tag);
+ *tagupper = cpu_to_le32(tag >> 32);
+ *taglower = cpu_to_le32(tag);
}
static int hpsa_send_abort(struct ctlr_info *h, unsigned char *scsi3addr,
@@ -4254,11 +4417,11 @@ static int hpsa_send_abort(struct ctlr_info *h, unsigned char *scsi3addr,
int rc = IO_OK;
struct CommandList *c;
struct ErrorInfo *ei;
- u32 tagupper, taglower;
+ __le32 tagupper, taglower;
- c = cmd_special_alloc(h);
+ c = cmd_alloc(h);
if (c == NULL) { /* trouble... */
- dev_warn(&h->pdev->dev, "cmd_special_alloc returned NULL!\n");
+ dev_warn(&h->pdev->dev, "cmd_alloc returned NULL!\n");
return -ENOMEM;
}
@@ -4287,62 +4450,12 @@ static int hpsa_send_abort(struct ctlr_info *h, unsigned char *scsi3addr,
rc = -1;
break;
}
- cmd_special_free(h, c);
+ cmd_free(h, c);
dev_dbg(&h->pdev->dev, "%s: Tag:0x%08x:%08x: Finished.\n",
__func__, tagupper, taglower);
return rc;
}
-/*
- * hpsa_find_cmd_in_queue
- *
- * Used to determine whether a command (find) is still present
- * in queue_head. Optionally excludes the last element of queue_head.
- *
- * This is used to avoid unnecessary aborts. Commands in h->reqQ have
- * not yet been submitted, and so can be aborted by the driver without
- * sending an abort to the hardware.
- *
- * Returns pointer to command if found in queue, NULL otherwise.
- */
-static struct CommandList *hpsa_find_cmd_in_queue(struct ctlr_info *h,
- struct scsi_cmnd *find, struct list_head *queue_head)
-{
- unsigned long flags;
- struct CommandList *c = NULL; /* ptr into cmpQ */
-
- if (!find)
- return NULL;
- spin_lock_irqsave(&h->lock, flags);
- list_for_each_entry(c, queue_head, list) {
- if (c->scsi_cmd == NULL) /* e.g.: passthru ioctl */
- continue;
- if (c->scsi_cmd == find) {
- spin_unlock_irqrestore(&h->lock, flags);
- return c;
- }
- }
- spin_unlock_irqrestore(&h->lock, flags);
- return NULL;
-}
-
-static struct CommandList *hpsa_find_cmd_in_queue_by_tag(struct ctlr_info *h,
- u8 *tag, struct list_head *queue_head)
-{
- unsigned long flags;
- struct CommandList *c;
-
- spin_lock_irqsave(&h->lock, flags);
- list_for_each_entry(c, queue_head, list) {
- if (memcmp(&c->Header.tag, tag, 8) != 0)
- continue;
- spin_unlock_irqrestore(&h->lock, flags);
- return c;
- }
- spin_unlock_irqrestore(&h->lock, flags);
- return NULL;
-}
-
/* ioaccel2 path firmware cannot handle abort task requests.
* Change abort requests to physical target reset, and send to the
* address of the physical disk used for the ioaccel 2 command.
@@ -4360,7 +4473,7 @@ static int hpsa_send_reset_as_abort_ioaccel2(struct ctlr_info *h,
unsigned char *psa = &phys_scsi3addr[0];
/* Get a pointer to the hpsa logical device. */
- scmd = (struct scsi_cmnd *) abort->scsi_cmd;
+ scmd = abort->scsi_cmd;
dev = (struct hpsa_scsi_dev_t *)(scmd->device->hostdata);
if (dev == NULL) {
dev_warn(&h->pdev->dev,
@@ -4429,10 +4542,6 @@ static int hpsa_send_reset_as_abort_ioaccel2(struct ctlr_info *h,
static int hpsa_send_abort_both_ways(struct ctlr_info *h,
unsigned char *scsi3addr, struct CommandList *abort)
{
- u8 swizzled_tag[8];
- struct CommandList *c;
- int rc = 0, rc2 = 0;
-
/* ioccelerator mode 2 commands should be aborted via the
* accelerated path, since RAID path is unaware of these commands,
* but underlying firmware can't handle abort TMF.
@@ -4441,27 +4550,8 @@ static int hpsa_send_abort_both_ways(struct ctlr_info *h,
if (abort->cmd_type == CMD_IOACCEL2)
return hpsa_send_reset_as_abort_ioaccel2(h, scsi3addr, abort);
- /* we do not expect to find the swizzled tag in our queue, but
- * check anyway just to be sure the assumptions which make this
- * the case haven't become wrong.
- */
- memcpy(swizzled_tag, &abort->Request.CDB[4], 8);
- swizzle_abort_tag(swizzled_tag);
- c = hpsa_find_cmd_in_queue_by_tag(h, swizzled_tag, &h->cmpQ);
- if (c != NULL) {
- dev_warn(&h->pdev->dev, "Unexpectedly found byte-swapped tag in completion queue.\n");
- return hpsa_send_abort(h, scsi3addr, abort, 0);
- }
- rc = hpsa_send_abort(h, scsi3addr, abort, 0);
-
- /* if the command is still in our queue, we can't conclude that it was
- * aborted (it might have just completed normally) but in any case
- * we don't need to try to abort it another way.
- */
- c = hpsa_find_cmd_in_queue(h, abort->scsi_cmd, &h->cmpQ);
- if (c)
- rc2 = hpsa_send_abort(h, scsi3addr, abort, 1);
- return rc && rc2;
+ return hpsa_send_abort(h, scsi3addr, abort, 0) &&
+ hpsa_send_abort(h, scsi3addr, abort, 1);
}
/* Send an abort for the specified command.
@@ -4475,11 +4565,11 @@ static int hpsa_eh_abort_handler(struct scsi_cmnd *sc)
struct ctlr_info *h;
struct hpsa_scsi_dev_t *dev;
struct CommandList *abort; /* pointer to command to be aborted */
- struct CommandList *found;
struct scsi_cmnd *as; /* ptr to scsi cmd inside aborted command. */
char msg[256]; /* For debug messaging. */
int ml = 0;
- u32 tagupper, taglower;
+ __le32 tagupper, taglower;
+ int refcount;
/* Find the controller of the command to be aborted */
h = sdev_to_hba(sc->device);
@@ -4487,6 +4577,9 @@ static int hpsa_eh_abort_handler(struct scsi_cmnd *sc)
"ABORT REQUEST FAILED, Controller lookup failed.\n"))
return FAILED;
+ if (lockup_detected(h))
+ return FAILED;
+
/* Check that controller supports some kind of task abort */
if (!(HPSATMF_PHYS_TASK_ABORT & h->TMFSupportFlags) &&
!(HPSATMF_LOG_TASK_ABORT & h->TMFSupportFlags))
@@ -4508,41 +4601,23 @@ static int hpsa_eh_abort_handler(struct scsi_cmnd *sc)
/* Get SCSI command to be aborted */
abort = (struct CommandList *) sc->host_scribble;
if (abort == NULL) {
- dev_err(&h->pdev->dev, "%s FAILED, Command to abort is NULL.\n",
- msg);
- return FAILED;
+ /* This can happen if the command already completed. */
+ return SUCCESS;
+ }
+ refcount = atomic_inc_return(&abort->refcount);
+ if (refcount == 1) { /* Command is done already. */
+ cmd_free(h, abort);
+ return SUCCESS;
}
hpsa_get_tag(h, abort, &taglower, &tagupper);
ml += sprintf(msg+ml, "Tag:0x%08x:%08x ", tagupper, taglower);
- as = (struct scsi_cmnd *) abort->scsi_cmd;
+ as = abort->scsi_cmd;
if (as != NULL)
ml += sprintf(msg+ml, "Command:0x%x SN:0x%lx ",
as->cmnd[0], as->serial_number);
dev_dbg(&h->pdev->dev, "%s\n", msg);
dev_warn(&h->pdev->dev, "Abort request on C%d:B%d:T%d:L%d\n",
h->scsi_host->host_no, dev->bus, dev->target, dev->lun);
-
- /* Search reqQ to See if command is queued but not submitted,
- * if so, complete the command with aborted status and remove
- * it from the reqQ.
- */
- found = hpsa_find_cmd_in_queue(h, sc, &h->reqQ);
- if (found) {
- found->err_info->CommandStatus = CMD_ABORTED;
- finish_cmd(found);
- dev_info(&h->pdev->dev, "%s Request SUCCEEDED (driver queue).\n",
- msg);
- return SUCCESS;
- }
-
- /* not in reqQ, if also not in cmpQ, must have already completed */
- found = hpsa_find_cmd_in_queue(h, sc, &h->cmpQ);
- if (!found) {
- dev_dbg(&h->pdev->dev, "%s Request SUCCEEDED (not known to driver).\n",
- msg);
- return SUCCESS;
- }
-
/*
* Command is in flight, or possibly already completed
* by the firmware (but not to the scsi mid layer) but we can't
@@ -4554,6 +4629,7 @@ static int hpsa_eh_abort_handler(struct scsi_cmnd *sc)
dev_warn(&h->pdev->dev, "FAILED abort on device C%d:B%d:T%d:L%d\n",
h->scsi_host->host_no,
dev->bus, dev->target, dev->lun);
+ cmd_free(h, abort);
return FAILED;
}
dev_info(&h->pdev->dev, "%s REQUEST SUCCEEDED.\n", msg);
@@ -4565,32 +4641,38 @@ static int hpsa_eh_abort_handler(struct scsi_cmnd *sc)
*/
#define ABORT_COMPLETE_WAIT_SECS 30
for (i = 0; i < ABORT_COMPLETE_WAIT_SECS * 10; i++) {
- found = hpsa_find_cmd_in_queue(h, sc, &h->cmpQ);
- if (!found)
+ refcount = atomic_read(&abort->refcount);
+ if (refcount < 2) {
+ cmd_free(h, abort);
return SUCCESS;
- msleep(100);
+ } else {
+ msleep(100);
+ }
}
dev_warn(&h->pdev->dev, "%s FAILED. Aborted command has not completed after %d seconds.\n",
msg, ABORT_COMPLETE_WAIT_SECS);
+ cmd_free(h, abort);
return FAILED;
}
-
/*
* For operations that cannot sleep, a command block is allocated at init,
* and managed by cmd_alloc() and cmd_free() using a simple bitmap to track
* which ones are free or in use. Lock must be held when calling this.
* cmd_free() is the complement.
*/
+
static struct CommandList *cmd_alloc(struct ctlr_info *h)
{
struct CommandList *c;
int i;
union u64bit temp64;
dma_addr_t cmd_dma_handle, err_dma_handle;
- int loopcount;
+ int refcount;
+ unsigned long offset;
- /* There is some *extremely* small but non-zero chance that that
+ /*
+ * There is some *extremely* small but non-zero chance that that
* multiple threads could get in here, and one thread could
* be scanning through the list of bits looking for a free
* one, but the free ones are always behind him, and other
@@ -4601,24 +4683,30 @@ static struct CommandList *cmd_alloc(struct ctlr_info *h)
* infrequently as to be indistinguishable from never.
*/
- loopcount = 0;
- do {
- i = find_first_zero_bit(h->cmd_pool_bits, h->nr_cmds);
- if (i == h->nr_cmds)
- i = 0;
- loopcount++;
- } while (test_and_set_bit(i & (BITS_PER_LONG - 1),
- h->cmd_pool_bits + (i / BITS_PER_LONG)) != 0 &&
- loopcount < 10);
-
- /* Thread got starved? We do not expect this to ever happen. */
- if (loopcount >= 10)
- return NULL;
-
- c = h->cmd_pool + i;
- memset(c, 0, sizeof(*c));
- cmd_dma_handle = h->cmd_pool_dhandle
- + i * sizeof(*c);
+ offset = h->last_allocation; /* benignly racy */
+ for (;;) {
+ i = find_next_zero_bit(h->cmd_pool_bits, h->nr_cmds, offset);
+ if (unlikely(i == h->nr_cmds)) {
+ offset = 0;
+ continue;
+ }
+ c = h->cmd_pool + i;
+ refcount = atomic_inc_return(&c->refcount);
+ if (unlikely(refcount > 1)) {
+ cmd_free(h, c); /* already in use */
+ offset = (i + 1) % h->nr_cmds;
+ continue;
+ }
+ set_bit(i & (BITS_PER_LONG - 1),
+ h->cmd_pool_bits + (i / BITS_PER_LONG));
+ break; /* it's ours now. */
+ }
+ h->last_allocation = i; /* benignly racy */
+
+ /* Zero out all of commandlist except the last field, refcount */
+ memset(c, 0, offsetof(struct CommandList, refcount));
+ c->Header.tag = cpu_to_le64((u64) (i << DIRECT_LOOKUP_SHIFT));
+ cmd_dma_handle = h->cmd_pool_dhandle + i * sizeof(*c);
c->err_info = h->errinfo_pool + i;
memset(c->err_info, 0, sizeof(*c->err_info));
err_dma_handle = h->errinfo_pool_dhandle
@@ -4626,45 +4714,10 @@ static struct CommandList *cmd_alloc(struct ctlr_info *h)
c->cmdindex = i;
- INIT_LIST_HEAD(&c->list);
c->busaddr = (u32) cmd_dma_handle;
temp64.val = (u64) err_dma_handle;
- c->ErrDesc.Addr = cpu_to_le64(err_dma_handle);
- c->ErrDesc.Len = cpu_to_le32(sizeof(*c->err_info));
-
- c->h = h;
- return c;
-}
-
-/* For operations that can wait for kmalloc to possibly sleep,
- * this routine can be called. Lock need not be held to call
- * cmd_special_alloc. cmd_special_free() is the complement.
- */
-static struct CommandList *cmd_special_alloc(struct ctlr_info *h)
-{
- struct CommandList *c;
- dma_addr_t cmd_dma_handle, err_dma_handle;
-
- c = pci_zalloc_consistent(h->pdev, sizeof(*c), &cmd_dma_handle);
- if (c == NULL)
- return NULL;
-
- c->cmd_type = CMD_SCSI;
- c->cmdindex = -1;
-
- c->err_info = pci_zalloc_consistent(h->pdev, sizeof(*c->err_info),
- &err_dma_handle);
-
- if (c->err_info == NULL) {
- pci_free_consistent(h->pdev,
- sizeof(*c), c, cmd_dma_handle);
- return NULL;
- }
-
- INIT_LIST_HEAD(&c->list);
- c->busaddr = (u32) cmd_dma_handle;
- c->ErrDesc.Addr = cpu_to_le64(err_dma_handle);
- c->ErrDesc.Len = cpu_to_le32(sizeof(*c->err_info));
+ c->ErrDesc.Addr = cpu_to_le64((u64) err_dma_handle);
+ c->ErrDesc.Len = cpu_to_le32((u32) sizeof(*c->err_info));
c->h = h;
return c;
@@ -4672,20 +4725,13 @@ static struct CommandList *cmd_special_alloc(struct ctlr_info *h)
static void cmd_free(struct ctlr_info *h, struct CommandList *c)
{
- int i;
-
- i = c - h->cmd_pool;
- clear_bit(i & (BITS_PER_LONG - 1),
- h->cmd_pool_bits + (i / BITS_PER_LONG));
-}
+ if (atomic_dec_and_test(&c->refcount)) {
+ int i;
-static void cmd_special_free(struct ctlr_info *h, struct CommandList *c)
-{
- pci_free_consistent(h->pdev, sizeof(*c->err_info),
- c->err_info,
- (dma_addr_t) le64_to_cpu(c->ErrDesc.Addr));
- pci_free_consistent(h->pdev, sizeof(*c),
- c, (dma_addr_t) (c->busaddr & DIRECT_LOOKUP_MASK));
+ i = c - h->cmd_pool;
+ clear_bit(i & (BITS_PER_LONG - 1),
+ h->cmd_pool_bits + (i / BITS_PER_LONG));
+ }
}
#ifdef CONFIG_COMPAT
@@ -4866,7 +4912,7 @@ static int hpsa_passthru_ioctl(struct ctlr_info *h, void __user *argp)
memset(buff, 0, iocommand.buf_size);
}
}
- c = cmd_special_alloc(h);
+ c = cmd_alloc(h);
if (c == NULL) {
rc = -ENOMEM;
goto out_kfree;
@@ -4883,8 +4929,6 @@ static int hpsa_passthru_ioctl(struct ctlr_info *h, void __user *argp)
c->Header.SGTotal = cpu_to_le16(0);
}
memcpy(&c->Header.LUN, &iocommand.LUN_info, sizeof(c->Header.LUN));
- /* use the kernel address the cmd block for tag */
- c->Header.tag = c->busaddr;
/* Fill in Request block */
memcpy(&c->Request, &iocommand.Request,
@@ -4925,7 +4969,7 @@ static int hpsa_passthru_ioctl(struct ctlr_info *h, void __user *argp)
}
}
out:
- cmd_special_free(h, c);
+ cmd_free(h, c);
out_kfree:
kfree(buff);
return rc;
@@ -4940,7 +4984,6 @@ static int hpsa_big_passthru_ioctl(struct ctlr_info *h, void __user *argp)
u64 temp64;
BYTE sg_used = 0;
int status = 0;
- int i;
u32 left;
u32 sz;
BYTE __user *data_ptr;
@@ -5004,7 +5047,7 @@ static int hpsa_big_passthru_ioctl(struct ctlr_info *h, void __user *argp)
data_ptr += sz;
sg_used++;
}
- c = cmd_special_alloc(h);
+ c = cmd_alloc(h);
if (c == NULL) {
status = -ENOMEM;
goto cleanup1;
@@ -5014,7 +5057,6 @@ static int hpsa_big_passthru_ioctl(struct ctlr_info *h, void __user *argp)
c->Header.SGList = (u8) sg_used;
c->Header.SGTotal = cpu_to_le16(sg_used);
memcpy(&c->Header.LUN, &ioc->LUN_info, sizeof(c->Header.LUN));
- c->Header.tag = c->busaddr;
memcpy(&c->Request, &ioc->Request, sizeof(c->Request));
if (ioc->buf_size > 0) {
int i;
@@ -5047,6 +5089,8 @@ static int hpsa_big_passthru_ioctl(struct ctlr_info *h, void __user *argp)
goto cleanup0;
}
if ((ioc->Request.Type.Direction & XFER_READ) && ioc->buf_size > 0) {
+ int i;
+
/* Copy the data out of the buffer we created */
BYTE __user *ptr = ioc->buf;
for (i = 0; i < sg_used; i++) {
@@ -5059,9 +5103,11 @@ static int hpsa_big_passthru_ioctl(struct ctlr_info *h, void __user *argp)
}
status = 0;
cleanup0:
- cmd_special_free(h, c);
+ cmd_free(h, c);
cleanup1:
if (buff) {
+ int i;
+
for (i = 0; i < sg_used; i++)
kfree(buff[i]);
kfree(buff);
@@ -5079,35 +5125,6 @@ static void check_ioctl_unit_attention(struct ctlr_info *h,
(void) check_for_unit_attention(h, c);
}
-static int increment_passthru_count(struct ctlr_info *h)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&h->passthru_count_lock, flags);
- if (h->passthru_count >= HPSA_MAX_CONCURRENT_PASSTHRUS) {
- spin_unlock_irqrestore(&h->passthru_count_lock, flags);
- return -1;
- }
- h->passthru_count++;
- spin_unlock_irqrestore(&h->passthru_count_lock, flags);
- return 0;
-}
-
-static void decrement_passthru_count(struct ctlr_info *h)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&h->passthru_count_lock, flags);
- if (h->passthru_count <= 0) {
- spin_unlock_irqrestore(&h->passthru_count_lock, flags);
- /* not expecting to get here. */
- dev_warn(&h->pdev->dev, "Bug detected, passthru_count seems to be incorrect.\n");
- return;
- }
- h->passthru_count--;
- spin_unlock_irqrestore(&h->passthru_count_lock, flags);
-}
-
/*
* ioctl
*/
@@ -5130,16 +5147,16 @@ static int hpsa_ioctl(struct scsi_device *dev, int cmd, void __user *arg)
case CCISS_GETDRIVVER:
return hpsa_getdrivver_ioctl(h, argp);
case CCISS_PASSTHRU:
- if (increment_passthru_count(h))
+ if (atomic_dec_if_positive(&h->passthru_cmds_avail) < 0)
return -EAGAIN;
rc = hpsa_passthru_ioctl(h, argp);
- decrement_passthru_count(h);
+ atomic_inc(&h->passthru_cmds_avail);
return rc;
case CCISS_BIG_PASSTHRU:
- if (increment_passthru_count(h))
+ if (atomic_dec_if_positive(&h->passthru_cmds_avail) < 0)
return -EAGAIN;
rc = hpsa_big_passthru_ioctl(h, argp);
- decrement_passthru_count(h);
+ atomic_inc(&h->passthru_cmds_avail);
return rc;
default:
return -ENOTTY;
@@ -5173,7 +5190,6 @@ static int fill_cmd(struct CommandList *c, u8 cmd, struct ctlr_info *h,
{
int pci_dir = XFER_NONE;
struct CommandList *a; /* for commands to be aborted */
- u32 tupper, tlower;
c->cmd_type = CMD_IOCTL_PEND;
c->Header.ReplyQueue = 0;
@@ -5184,7 +5200,6 @@ static int fill_cmd(struct CommandList *c, u8 cmd, struct ctlr_info *h,
c->Header.SGList = 0;
c->Header.SGTotal = cpu_to_le16(0);
}
- c->Header.tag = c->busaddr;
memcpy(c->Header.LUN.LunAddrBytes, scsi3addr, 8);
if (cmd_type == TYPE_CMD) {
@@ -5256,6 +5271,16 @@ static int fill_cmd(struct CommandList *c, u8 cmd, struct ctlr_info *h,
c->Request.CDB[7] = (size >> 16) & 0xFF;
c->Request.CDB[8] = (size >> 8) & 0xFF;
break;
+ case BMIC_IDENTIFY_PHYSICAL_DEVICE:
+ c->Request.CDBLen = 10;
+ c->Request.type_attr_dir =
+ TYPE_ATTR_DIR(cmd_type, ATTR_SIMPLE, XFER_READ);
+ c->Request.Timeout = 0;
+ c->Request.CDB[0] = BMIC_READ;
+ c->Request.CDB[6] = BMIC_IDENTIFY_PHYSICAL_DEVICE;
+ c->Request.CDB[7] = (size >> 16) & 0xFF;
+ c->Request.CDB[8] = (size >> 8) & 0XFF;
+ break;
default:
dev_warn(&h->pdev->dev, "unknown command 0x%c\n", cmd);
BUG();
@@ -5281,10 +5306,9 @@ static int fill_cmd(struct CommandList *c, u8 cmd, struct ctlr_info *h,
break;
case HPSA_ABORT_MSG:
a = buff; /* point to command to be aborted */
- dev_dbg(&h->pdev->dev, "Abort Tag:0x%016llx using request Tag:0x%016llx",
+ dev_dbg(&h->pdev->dev,
+ "Abort Tag:0x%016llx request Tag:0x%016llx",
a->Header.tag, c->Header.tag);
- tlower = (u32) (a->Header.tag >> 32);
- tupper = (u32) (a->Header.tag & 0x0ffffffffULL);
c->Request.CDBLen = 16;
c->Request.type_attr_dir =
TYPE_ATTR_DIR(cmd_type,
@@ -5295,14 +5319,8 @@ static int fill_cmd(struct CommandList *c, u8 cmd, struct ctlr_info *h,
c->Request.CDB[2] = 0x00; /* reserved */
c->Request.CDB[3] = 0x00; /* reserved */
/* Tag to abort goes in CDB[4]-CDB[11] */
- c->Request.CDB[4] = tlower & 0xFF;
- c->Request.CDB[5] = (tlower >> 8) & 0xFF;
- c->Request.CDB[6] = (tlower >> 16) & 0xFF;
- c->Request.CDB[7] = (tlower >> 24) & 0xFF;
- c->Request.CDB[8] = tupper & 0xFF;
- c->Request.CDB[9] = (tupper >> 8) & 0xFF;
- c->Request.CDB[10] = (tupper >> 16) & 0xFF;
- c->Request.CDB[11] = (tupper >> 24) & 0xFF;
+ memcpy(&c->Request.CDB[4], &a->Header.tag,
+ sizeof(a->Header.tag));
c->Request.CDB[12] = 0x00; /* reserved */
c->Request.CDB[13] = 0x00; /* reserved */
c->Request.CDB[14] = 0x00; /* reserved */
@@ -5349,47 +5367,6 @@ static void __iomem *remap_pci_mem(ulong base, ulong size)
return page_remapped ? (page_remapped + page_offs) : NULL;
}
-/* Takes cmds off the submission queue and sends them to the hardware,
- * then puts them on the queue of cmds waiting for completion.
- * Assumes h->lock is held
- */
-static void start_io(struct ctlr_info *h, unsigned long *flags)
-{
- struct CommandList *c;
-
- while (!list_empty(&h->reqQ)) {
- c = list_entry(h->reqQ.next, struct CommandList, list);
- /* can't do anything if fifo is full */
- if ((h->access.fifo_full(h))) {
- h->fifo_recently_full = 1;
- dev_warn(&h->pdev->dev, "fifo full\n");
- break;
- }
- h->fifo_recently_full = 0;
-
- /* Get the first entry from the Request Q */
- removeQ(c);
- h->Qdepth--;
-
- /* Put job onto the completed Q */
- addQ(&h->cmpQ, c);
- atomic_inc(&h->commands_outstanding);
- spin_unlock_irqrestore(&h->lock, *flags);
- /* Tell the controller execute command */
- h->access.submit_command(h, c);
- spin_lock_irqsave(&h->lock, *flags);
- }
-}
-
-static void lock_and_start_io(struct ctlr_info *h)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&h->lock, flags);
- start_io(h, &flags);
- spin_unlock_irqrestore(&h->lock, flags);
-}
-
static inline unsigned long get_next_completion(struct ctlr_info *h, u8 q)
{
return h->access.command_completed(h, q);
@@ -5418,53 +5395,12 @@ static inline int bad_tag(struct ctlr_info *h, u32 tag_index,
static inline void finish_cmd(struct CommandList *c)
{
- unsigned long flags;
- int io_may_be_stalled = 0;
- struct ctlr_info *h = c->h;
- int count;
-
- spin_lock_irqsave(&h->lock, flags);
- removeQ(c);
-
- /*
- * Check for possibly stalled i/o.
- *
- * If a fifo_full condition is encountered, requests will back up
- * in h->reqQ. This queue is only emptied out by start_io which is
- * only called when a new i/o request comes in. If no i/o's are
- * forthcoming, the i/o's in h->reqQ can get stuck. So we call
- * start_io from here if we detect such a danger.
- *
- * Normally, we shouldn't hit this case, but pounding on the
- * CCISS_PASSTHRU ioctl can provoke it. Only call start_io if
- * commands_outstanding is low. We want to avoid calling
- * start_io from in here as much as possible, and esp. don't
- * want to get in a cycle where we call start_io every time
- * through here.
- */
- count = atomic_read(&h->commands_outstanding);
- spin_unlock_irqrestore(&h->lock, flags);
- if (unlikely(h->fifo_recently_full) && count < 5)
- io_may_be_stalled = 1;
-
dial_up_lockup_detection_on_fw_flash_complete(c->h, c);
if (likely(c->cmd_type == CMD_IOACCEL1 || c->cmd_type == CMD_SCSI
|| c->cmd_type == CMD_IOACCEL2))
complete_scsi_command(c);
else if (c->cmd_type == CMD_IOCTL_PEND)
complete(c->waiting);
- if (unlikely(io_may_be_stalled))
- lock_and_start_io(h);
-}
-
-static inline u32 hpsa_tag_contains_index(u32 tag)
-{
- return tag & DIRECT_LOOKUP_BIT;
-}
-
-static inline u32 hpsa_tag_to_index(u32 tag)
-{
- return tag >> DIRECT_LOOKUP_SHIFT;
}
@@ -5484,34 +5420,13 @@ static inline void process_indexed_cmd(struct ctlr_info *h,
u32 tag_index;
struct CommandList *c;
- tag_index = hpsa_tag_to_index(raw_tag);
+ tag_index = raw_tag >> DIRECT_LOOKUP_SHIFT;
if (!bad_tag(h, tag_index, raw_tag)) {
c = h->cmd_pool + tag_index;
finish_cmd(c);
}
}
-/* process completion of a non-indexed command */
-static inline void process_nonindexed_cmd(struct ctlr_info *h,
- u32 raw_tag)
-{
- u32 tag;
- struct CommandList *c = NULL;
- unsigned long flags;
-
- tag = hpsa_tag_discard_error_bits(h, raw_tag);
- spin_lock_irqsave(&h->lock, flags);
- list_for_each_entry(c, &h->cmpQ, list) {
- if ((c->busaddr & 0xFFFFFFE0) == (tag & 0xFFFFFFE0)) {
- spin_unlock_irqrestore(&h->lock, flags);
- finish_cmd(c);
- return;
- }
- }
- spin_unlock_irqrestore(&h->lock, flags);
- bad_tag(h, h->nr_cmds + 1, raw_tag);
-}
-
/* Some controllers, like p400, will give us one interrupt
* after a soft reset, even if we turned interrupts off.
* Only need to check for this in the hpsa_xxx_discard_completions
@@ -5589,10 +5504,7 @@ static irqreturn_t do_hpsa_intr_intx(int irq, void *queue)
while (interrupt_pending(h)) {
raw_tag = get_next_completion(h, q);
while (raw_tag != FIFO_EMPTY) {
- if (likely(hpsa_tag_contains_index(raw_tag)))
- process_indexed_cmd(h, raw_tag);
- else
- process_nonindexed_cmd(h, raw_tag);
+ process_indexed_cmd(h, raw_tag);
raw_tag = next_command(h, q);
}
}
@@ -5608,10 +5520,7 @@ static irqreturn_t do_hpsa_intr_msi(int irq, void *queue)
h->last_intr_timestamp = get_jiffies_64();
raw_tag = get_next_completion(h, q);
while (raw_tag != FIFO_EMPTY) {
- if (likely(hpsa_tag_contains_index(raw_tag)))
- process_indexed_cmd(h, raw_tag);
- else
- process_nonindexed_cmd(h, raw_tag);
+ process_indexed_cmd(h, raw_tag);
raw_tag = next_command(h, q);
}
return IRQ_HANDLED;
@@ -5633,7 +5542,8 @@ static int hpsa_message(struct pci_dev *pdev, unsigned char opcode,
static const size_t cmd_sz = sizeof(*cmd) +
sizeof(cmd->ErrorDescriptor);
dma_addr_t paddr64;
- uint32_t paddr32, tag;
+ __le32 paddr32;
+ u32 tag;
void __iomem *vaddr;
int i, err;
@@ -5648,7 +5558,7 @@ static int hpsa_message(struct pci_dev *pdev, unsigned char opcode,
err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
if (err) {
iounmap(vaddr);
- return -ENOMEM;
+ return err;
}
cmd = pci_alloc_consistent(pdev, cmd_sz, &paddr64);
@@ -5661,12 +5571,12 @@ static int hpsa_message(struct pci_dev *pdev, unsigned char opcode,
* although there's no guarantee, we assume that the address is at
* least 4-byte aligned (most likely, it's page-aligned).
*/
- paddr32 = paddr64;
+ paddr32 = cpu_to_le32(paddr64);
cmd->CommandHeader.ReplyQueue = 0;
cmd->CommandHeader.SGList = 0;
cmd->CommandHeader.SGTotal = cpu_to_le16(0);
- cmd->CommandHeader.tag = paddr32;
+ cmd->CommandHeader.tag = cpu_to_le64(paddr64);
memset(&cmd->CommandHeader.LUN.LunAddrBytes, 0, 8);
cmd->Request.CDBLen = 16;
@@ -5677,14 +5587,14 @@ static int hpsa_message(struct pci_dev *pdev, unsigned char opcode,
cmd->Request.CDB[1] = type;
memset(&cmd->Request.CDB[2], 0, 14); /* rest of the CDB is reserved */
cmd->ErrorDescriptor.Addr =
- cpu_to_le64((paddr32 + sizeof(*cmd)));
+ cpu_to_le64((le32_to_cpu(paddr32) + sizeof(*cmd)));
cmd->ErrorDescriptor.Len = cpu_to_le32(sizeof(struct ErrorInfo));
- writel(paddr32, vaddr + SA5_REQUEST_PORT_OFFSET);
+ writel(le32_to_cpu(paddr32), vaddr + SA5_REQUEST_PORT_OFFSET);
for (i = 0; i < HPSA_MSG_SEND_RETRY_LIMIT; i++) {
tag = readl(vaddr + SA5_REPLY_PORT_OFFSET);
- if ((tag & ~HPSA_SIMPLE_ERROR_BITS) == paddr32)
+ if ((tag & ~HPSA_SIMPLE_ERROR_BITS) == paddr64)
break;
msleep(HPSA_MSG_SEND_RETRY_INTERVAL_MSECS);
}
@@ -5718,8 +5628,6 @@ static int hpsa_message(struct pci_dev *pdev, unsigned char opcode,
static int hpsa_controller_hard_reset(struct pci_dev *pdev,
void __iomem *vaddr, u32 use_doorbell)
{
- u16 pmcsr;
- int pos;
if (use_doorbell) {
/* For everything after the P600, the PCI power state method
@@ -5745,26 +5653,21 @@ static int hpsa_controller_hard_reset(struct pci_dev *pdev,
* this causes a secondary PCI reset which will reset the
* controller." */
- pos = pci_find_capability(pdev, PCI_CAP_ID_PM);
- if (pos == 0) {
- dev_err(&pdev->dev,
- "hpsa_reset_controller: "
- "PCI PM not supported\n");
- return -ENODEV;
- }
+ int rc = 0;
+
dev_info(&pdev->dev, "using PCI PM to reset controller\n");
+
/* enter the D3hot power management state */
- pci_read_config_word(pdev, pos + PCI_PM_CTRL, &pmcsr);
- pmcsr &= ~PCI_PM_CTRL_STATE_MASK;
- pmcsr |= PCI_D3hot;
- pci_write_config_word(pdev, pos + PCI_PM_CTRL, pmcsr);
+ rc = pci_set_power_state(pdev, PCI_D3hot);
+ if (rc)
+ return rc;
msleep(500);
/* enter the D0 power management state */
- pmcsr &= ~PCI_PM_CTRL_STATE_MASK;
- pmcsr |= PCI_D0;
- pci_write_config_word(pdev, pos + PCI_PM_CTRL, pmcsr);
+ rc = pci_set_power_state(pdev, PCI_D0);
+ if (rc)
+ return rc;
/*
* The P600 requires a small delay when changing states.
@@ -5858,8 +5761,12 @@ static int hpsa_kdump_hard_reset_controller(struct pci_dev *pdev)
*/
rc = hpsa_lookup_board_id(pdev, &board_id);
- if (rc < 0 || !ctlr_is_resettable(board_id)) {
- dev_warn(&pdev->dev, "Not resetting device.\n");
+ if (rc < 0) {
+ dev_warn(&pdev->dev, "Board ID not found\n");
+ return rc;
+ }
+ if (!ctlr_is_resettable(board_id)) {
+ dev_warn(&pdev->dev, "Controller not resettable\n");
return -ENODEV;
}
@@ -5892,7 +5799,7 @@ static int hpsa_kdump_hard_reset_controller(struct pci_dev *pdev)
}
rc = write_driver_ver_to_cfgtable(cfgtable);
if (rc)
- goto unmap_vaddr;
+ goto unmap_cfgtable;
/* If reset via doorbell register is supported, use that.
* There are two such methods. Favor the newest method.
@@ -5904,8 +5811,8 @@ static int hpsa_kdump_hard_reset_controller(struct pci_dev *pdev)
} else {
use_doorbell = misc_fw_support & MISC_FW_DOORBELL_RESET;
if (use_doorbell) {
- dev_warn(&pdev->dev, "Soft reset not supported. "
- "Firmware update is required.\n");
+ dev_warn(&pdev->dev,
+ "Soft reset not supported. Firmware update is required.\n");
rc = -ENOTSUPP; /* try soft reset */
goto unmap_cfgtable;
}
@@ -5925,8 +5832,7 @@ static int hpsa_kdump_hard_reset_controller(struct pci_dev *pdev)
rc = hpsa_wait_for_board_state(pdev, vaddr, BOARD_READY);
if (rc) {
dev_warn(&pdev->dev,
- "failed waiting for board to become ready "
- "after hard reset\n");
+ "Failed waiting for board to become ready after hard reset\n");
goto unmap_cfgtable;
}
@@ -5977,7 +5883,7 @@ static void print_cfg_table(struct device *dev, struct CfgTable __iomem *tb)
readl(&(tb->HostWrite.CoalIntDelay)));
dev_info(dev, " Coalesce Interrupt Count = 0x%x\n",
readl(&(tb->HostWrite.CoalIntCount)));
- dev_info(dev, " Max outstanding commands = 0x%d\n",
+ dev_info(dev, " Max outstanding commands = %d\n",
readl(&(tb->CmdsOutMax)));
dev_info(dev, " Bus Types = 0x%x\n", readl(&(tb->BusTypes)));
for (i = 0; i < 16; i++)
@@ -6025,7 +5931,7 @@ static int find_PCI_BAR_index(struct pci_dev *pdev, unsigned long pci_bar_addr)
}
/* If MSI/MSI-X is supported by the kernel we will try to enable it on
- * controllers that are capable. If not, we use IO-APIC mode.
+ * controllers that are capable. If not, we use legacy INTx mode.
*/
static void hpsa_interrupt_mode(struct ctlr_info *h)
@@ -6044,7 +5950,7 @@ static void hpsa_interrupt_mode(struct ctlr_info *h)
(h->board_id == 0x40820E11) || (h->board_id == 0x40830E11))
goto default_int_mode;
if (pci_find_capability(h->pdev, PCI_CAP_ID_MSIX)) {
- dev_info(&h->pdev->dev, "MSIX\n");
+ dev_info(&h->pdev->dev, "MSI-X capable controller\n");
h->msix_vector = MAX_REPLY_QUEUES;
if (h->msix_vector > num_online_cpus())
h->msix_vector = num_online_cpus();
@@ -6065,7 +5971,7 @@ static void hpsa_interrupt_mode(struct ctlr_info *h)
}
single_msi_mode:
if (pci_find_capability(h->pdev, PCI_CAP_ID_MSI)) {
- dev_info(&h->pdev->dev, "MSI\n");
+ dev_info(&h->pdev->dev, "MSI capable controller\n");
if (!pci_enable_msi(h->pdev))
h->msi_vector = 1;
else
@@ -6172,8 +6078,10 @@ static int hpsa_find_cfgtables(struct ctlr_info *h)
return rc;
h->cfgtable = remap_pci_mem(pci_resource_start(h->pdev,
cfg_base_addr_index) + cfg_offset, sizeof(*h->cfgtable));
- if (!h->cfgtable)
+ if (!h->cfgtable) {
+ dev_err(&h->pdev->dev, "Failed mapping cfgtable\n");
return -ENOMEM;
+ }
rc = write_driver_ver_to_cfgtable(h->cfgtable);
if (rc)
return rc;
@@ -6204,6 +6112,15 @@ static void hpsa_get_max_perf_mode_cmds(struct ctlr_info *h)
}
}
+/* If the controller reports that the total max sg entries is greater than 512,
+ * then we know that chained SG blocks work. (Original smart arrays did not
+ * support chained SG blocks and would return zero for max sg entries.)
+ */
+static int hpsa_supports_chained_sg_blocks(struct ctlr_info *h)
+{
+ return h->maxsgentries > 512;
+}
+
/* Interrogate the hardware for some limits:
* max commands, max SG elements without chaining, and with chaining,
* SG chain block size, etc.
@@ -6211,21 +6128,23 @@ static void hpsa_get_max_perf_mode_cmds(struct ctlr_info *h)
static void hpsa_find_board_params(struct ctlr_info *h)
{
hpsa_get_max_perf_mode_cmds(h);
- h->nr_cmds = h->max_commands - 4; /* Allow room for some ioctls */
+ h->nr_cmds = h->max_commands;
h->maxsgentries = readl(&(h->cfgtable->MaxScatterGatherElements));
h->fw_support = readl(&(h->cfgtable->misc_fw_support));
- /*
- * Limit in-command s/g elements to 32 save dma'able memory.
- * Howvever spec says if 0, use 31
- */
- h->max_cmd_sg_entries = 31;
- if (h->maxsgentries > 512) {
+ if (hpsa_supports_chained_sg_blocks(h)) {
+ /* Limit in-command s/g elements to 32 save dma'able memory. */
h->max_cmd_sg_entries = 32;
h->chainsize = h->maxsgentries - h->max_cmd_sg_entries;
h->maxsgentries--; /* save one for chain pointer */
} else {
- h->chainsize = 0;
+ /*
+ * Original smart arrays supported at most 31 s/g entries
+ * embedded inline in the command (trying to use more
+ * would lock up the controller)
+ */
+ h->max_cmd_sg_entries = 31;
h->maxsgentries = 31; /* default to traditional values */
+ h->chainsize = 0;
}
/* Find out what task management functions are supported and cache */
@@ -6239,7 +6158,7 @@ static void hpsa_find_board_params(struct ctlr_info *h)
static inline bool hpsa_CISS_signature_present(struct ctlr_info *h)
{
if (!check_signature(h->cfgtable->Signature, "CISS", 4)) {
- dev_warn(&h->pdev->dev, "not a valid CISS config table\n");
+ dev_err(&h->pdev->dev, "not a valid CISS config table\n");
return false;
}
return true;
@@ -6272,24 +6191,27 @@ static inline void hpsa_p600_dma_prefetch_quirk(struct ctlr_info *h)
writel(dma_prefetch, h->vaddr + I2O_DMA1_CFG);
}
-static void hpsa_wait_for_clear_event_notify_ack(struct ctlr_info *h)
+static int hpsa_wait_for_clear_event_notify_ack(struct ctlr_info *h)
{
int i;
u32 doorbell_value;
unsigned long flags;
/* wait until the clear_event_notify bit 6 is cleared by controller. */
- for (i = 0; i < MAX_CONFIG_WAIT; i++) {
+ for (i = 0; i < MAX_CLEAR_EVENT_WAIT; i++) {
spin_lock_irqsave(&h->lock, flags);
doorbell_value = readl(h->vaddr + SA5_DOORBELL);
spin_unlock_irqrestore(&h->lock, flags);
if (!(doorbell_value & DOORBELL_CLEAR_EVENTS))
- break;
+ goto done;
/* delay and try again */
- msleep(20);
+ msleep(CLEAR_EVENT_WAIT_INTERVAL);
}
+ return -ENODEV;
+done:
+ return 0;
}
-static void hpsa_wait_for_mode_change_ack(struct ctlr_info *h)
+static int hpsa_wait_for_mode_change_ack(struct ctlr_info *h)
{
int i;
u32 doorbell_value;
@@ -6299,17 +6221,21 @@ static void hpsa_wait_for_mode_change_ack(struct ctlr_info *h)
* (e.g.: hot replace a failed 144GB drive in a RAID 5 set right
* as we enter this code.)
*/
- for (i = 0; i < MAX_CONFIG_WAIT; i++) {
+ for (i = 0; i < MAX_MODE_CHANGE_WAIT; i++) {
spin_lock_irqsave(&h->lock, flags);
doorbell_value = readl(h->vaddr + SA5_DOORBELL);
spin_unlock_irqrestore(&h->lock, flags);
if (!(doorbell_value & CFGTBL_ChangeReq))
- break;
+ goto done;
/* delay and try again */
- usleep_range(10000, 20000);
+ msleep(MODE_CHANGE_WAIT_INTERVAL);
}
+ return -ENODEV;
+done:
+ return 0;
}
+/* return -ENODEV or other reason on error, 0 on success */
static int hpsa_enter_simple_mode(struct ctlr_info *h)
{
u32 trans_support;
@@ -6324,14 +6250,15 @@ static int hpsa_enter_simple_mode(struct ctlr_info *h)
writel(CFGTBL_Trans_Simple, &(h->cfgtable->HostWrite.TransportRequest));
writel(0, &h->cfgtable->HostWrite.command_pool_addr_hi);
writel(CFGTBL_ChangeReq, h->vaddr + SA5_DOORBELL);
- hpsa_wait_for_mode_change_ack(h);
+ if (hpsa_wait_for_mode_change_ack(h))
+ goto error;
print_cfg_table(&h->pdev->dev, h->cfgtable);
if (!(readl(&(h->cfgtable->TransportActive)) & CFGTBL_Trans_Simple))
goto error;
h->transMethod = CFGTBL_Trans_Simple;
return 0;
error:
- dev_warn(&h->pdev->dev, "unable to get board into simple mode\n");
+ dev_err(&h->pdev->dev, "failed to enter simple mode\n");
return -ENODEV;
}
@@ -6341,7 +6268,7 @@ static int hpsa_pci_init(struct ctlr_info *h)
prod_index = hpsa_lookup_board_id(h->pdev, &h->board_id);
if (prod_index < 0)
- return -ENODEV;
+ return prod_index;
h->product_name = products[prod_index].product_name;
h->access = *(products[prod_index].access);
@@ -6422,6 +6349,7 @@ static void hpsa_hba_inquiry(struct ctlr_info *h)
static int hpsa_init_reset_devices(struct pci_dev *pdev)
{
int rc, i;
+ void __iomem *vaddr;
if (!reset_devices)
return 0;
@@ -6445,6 +6373,14 @@ static int hpsa_init_reset_devices(struct pci_dev *pdev)
pci_set_master(pdev);
+ vaddr = pci_ioremap_bar(pdev, 0);
+ if (vaddr == NULL) {
+ rc = -ENOMEM;
+ goto out_disable;
+ }
+ writel(SA5_INTR_OFF, vaddr + SA5_REPLY_INTR_MASK_OFFSET);
+ iounmap(vaddr);
+
/* Reset the controller with a PCI power-cycle or via doorbell */
rc = hpsa_kdump_hard_reset_controller(pdev);
@@ -6453,14 +6389,11 @@ static int hpsa_init_reset_devices(struct pci_dev *pdev)
* "performant mode". Or, it might be 640x, which can't reset
* due to concerns about shared bbwc between 6402/6404 pair.
*/
- if (rc) {
- if (rc != -ENOTSUPP) /* just try to do the kdump anyhow. */
- rc = -ENODEV;
+ if (rc)
goto out_disable;
- }
/* Now try to get the controller to respond to a no-op */
- dev_warn(&pdev->dev, "Waiting for controller to respond to no-op\n");
+ dev_info(&pdev->dev, "Waiting for controller to respond to no-op\n");
for (i = 0; i < HPSA_POST_RESET_NOOP_RETRIES; i++) {
if (hpsa_noop(pdev) == 0)
break;
@@ -6490,9 +6423,12 @@ static int hpsa_allocate_cmd_pool(struct ctlr_info *h)
|| (h->cmd_pool == NULL)
|| (h->errinfo_pool == NULL)) {
dev_err(&h->pdev->dev, "out of memory in %s", __func__);
- return -ENOMEM;
+ goto clean_up;
}
return 0;
+clean_up:
+ hpsa_free_cmd_pool(h);
+ return -ENOMEM;
}
static void hpsa_free_cmd_pool(struct ctlr_info *h)
@@ -6519,16 +6455,38 @@ static void hpsa_free_cmd_pool(struct ctlr_info *h)
static void hpsa_irq_affinity_hints(struct ctlr_info *h)
{
- int i, cpu, rc;
+ int i, cpu;
cpu = cpumask_first(cpu_online_mask);
for (i = 0; i < h->msix_vector; i++) {
- rc = irq_set_affinity_hint(h->intr[i], get_cpu_mask(cpu));
+ irq_set_affinity_hint(h->intr[i], get_cpu_mask(cpu));
cpu = cpumask_next(cpu, cpu_online_mask);
}
}
-static int hpsa_request_irq(struct ctlr_info *h,
+/* clear affinity hints and free MSI-X, MSI, or legacy INTx vectors */
+static void hpsa_free_irqs(struct ctlr_info *h)
+{
+ int i;
+
+ if (!h->msix_vector || h->intr_mode != PERF_MODE_INT) {
+ /* Single reply queue, only one irq to free */
+ i = h->intr_mode;
+ irq_set_affinity_hint(h->intr[i], NULL);
+ free_irq(h->intr[i], &h->q[i]);
+ return;
+ }
+
+ for (i = 0; i < h->msix_vector; i++) {
+ irq_set_affinity_hint(h->intr[i], NULL);
+ free_irq(h->intr[i], &h->q[i]);
+ }
+ for (; i < MAX_REPLY_QUEUES; i++)
+ h->q[i] = 0;
+}
+
+/* returns 0 on success; cleans up and returns -Enn on error */
+static int hpsa_request_irqs(struct ctlr_info *h,
irqreturn_t (*msixhandler)(int, void *),
irqreturn_t (*intxhandler)(int, void *))
{
@@ -6543,10 +6501,25 @@ static int hpsa_request_irq(struct ctlr_info *h,
if (h->intr_mode == PERF_MODE_INT && h->msix_vector > 0) {
/* If performant mode and MSI-X, use multiple reply queues */
- for (i = 0; i < h->msix_vector; i++)
+ for (i = 0; i < h->msix_vector; i++) {
rc = request_irq(h->intr[i], msixhandler,
0, h->devname,
&h->q[i]);
+ if (rc) {
+ int j;
+
+ dev_err(&h->pdev->dev,
+ "failed to get irq %d for %s\n",
+ h->intr[i], h->devname);
+ for (j = 0; j < i; j++) {
+ free_irq(h->intr[j], &h->q[j]);
+ h->q[j] = 0;
+ }
+ for (; j < MAX_REPLY_QUEUES; j++)
+ h->q[j] = 0;
+ return rc;
+ }
+ }
hpsa_irq_affinity_hints(h);
} else {
/* Use single reply pool */
@@ -6592,27 +6565,9 @@ static int hpsa_kdump_soft_reset(struct ctlr_info *h)
return 0;
}
-static void free_irqs(struct ctlr_info *h)
-{
- int i;
-
- if (!h->msix_vector || h->intr_mode != PERF_MODE_INT) {
- /* Single reply queue, only one irq to free */
- i = h->intr_mode;
- irq_set_affinity_hint(h->intr[i], NULL);
- free_irq(h->intr[i], &h->q[i]);
- return;
- }
-
- for (i = 0; i < h->msix_vector; i++) {
- irq_set_affinity_hint(h->intr[i], NULL);
- free_irq(h->intr[i], &h->q[i]);
- }
-}
-
static void hpsa_free_irqs_and_disable_msix(struct ctlr_info *h)
{
- free_irqs(h);
+ hpsa_free_irqs(h);
#ifdef CONFIG_PCI_MSI
if (h->msix_vector) {
if (h->pdev->msix_enabled)
@@ -6658,16 +6613,20 @@ static void hpsa_undo_allocations_after_kdump_soft_reset(struct ctlr_info *h)
}
/* Called when controller lockup detected. */
-static void fail_all_cmds_on_list(struct ctlr_info *h, struct list_head *list)
+static void fail_all_outstanding_cmds(struct ctlr_info *h)
{
- struct CommandList *c = NULL;
+ int i, refcount;
+ struct CommandList *c;
- assert_spin_locked(&h->lock);
- /* Mark all outstanding commands as failed and complete them. */
- while (!list_empty(list)) {
- c = list_entry(list->next, struct CommandList, list);
- c->err_info->CommandStatus = CMD_HARDWARE_ERR;
- finish_cmd(c);
+ flush_workqueue(h->resubmit_wq); /* ensure all cmds are fully built */
+ for (i = 0; i < h->nr_cmds; i++) {
+ c = h->cmd_pool + i;
+ refcount = atomic_inc_return(&c->refcount);
+ if (refcount > 1) {
+ c->err_info->CommandStatus = CMD_HARDWARE_ERR;
+ finish_cmd(c);
+ }
+ cmd_free(h, c);
}
}
@@ -6704,10 +6663,7 @@ static void controller_lockup_detected(struct ctlr_info *h)
dev_warn(&h->pdev->dev, "Controller lockup detected: 0x%08x\n",
lockup_detected);
pci_disable_device(h->pdev);
- spin_lock_irqsave(&h->lock, flags);
- fail_all_cmds_on_list(h, &h->cmpQ);
- fail_all_cmds_on_list(h, &h->reqQ);
- spin_unlock_irqrestore(&h->lock, flags);
+ fail_all_outstanding_cmds(h);
}
static void detect_controller_lockup(struct ctlr_info *h)
@@ -6750,8 +6706,8 @@ static void hpsa_ack_ctlr_events(struct ctlr_info *h)
int i;
char *event_type;
- /* Clear the driver-requested rescan flag */
- h->drv_req_rescan = 0;
+ if (!(h->fw_support & MISC_FW_EVENT_NOTIFY))
+ return;
/* Ask the controller to clear the events we're handling. */
if ((h->transMethod & (CFGTBL_Trans_io_accel1
@@ -6798,9 +6754,6 @@ static void hpsa_ack_ctlr_events(struct ctlr_info *h)
*/
static int hpsa_ctlr_needs_rescan(struct ctlr_info *h)
{
- if (h->drv_req_rescan)
- return 1;
-
if (!(h->fw_support & MISC_FW_EVENT_NOTIFY))
return 0;
@@ -6834,34 +6787,60 @@ static int hpsa_offline_devices_ready(struct ctlr_info *h)
return 0;
}
-
-static void hpsa_monitor_ctlr_worker(struct work_struct *work)
+static void hpsa_rescan_ctlr_worker(struct work_struct *work)
{
unsigned long flags;
struct ctlr_info *h = container_of(to_delayed_work(work),
- struct ctlr_info, monitor_ctlr_work);
- detect_controller_lockup(h);
- if (lockup_detected(h))
+ struct ctlr_info, rescan_ctlr_work);
+
+
+ if (h->remove_in_progress)
return;
if (hpsa_ctlr_needs_rescan(h) || hpsa_offline_devices_ready(h)) {
scsi_host_get(h->scsi_host);
- h->drv_req_rescan = 0;
hpsa_ack_ctlr_events(h);
hpsa_scan_start(h->scsi_host);
scsi_host_put(h->scsi_host);
}
-
spin_lock_irqsave(&h->lock, flags);
- if (h->remove_in_progress) {
- spin_unlock_irqrestore(&h->lock, flags);
+ if (!h->remove_in_progress)
+ queue_delayed_work(h->rescan_ctlr_wq, &h->rescan_ctlr_work,
+ h->heartbeat_sample_interval);
+ spin_unlock_irqrestore(&h->lock, flags);
+}
+
+static void hpsa_monitor_ctlr_worker(struct work_struct *work)
+{
+ unsigned long flags;
+ struct ctlr_info *h = container_of(to_delayed_work(work),
+ struct ctlr_info, monitor_ctlr_work);
+
+ detect_controller_lockup(h);
+ if (lockup_detected(h))
return;
- }
- schedule_delayed_work(&h->monitor_ctlr_work,
+
+ spin_lock_irqsave(&h->lock, flags);
+ if (!h->remove_in_progress)
+ schedule_delayed_work(&h->monitor_ctlr_work,
h->heartbeat_sample_interval);
spin_unlock_irqrestore(&h->lock, flags);
}
+static struct workqueue_struct *hpsa_create_controller_wq(struct ctlr_info *h,
+ char *name)
+{
+ struct workqueue_struct *wq = NULL;
+ char wq_name[20];
+
+ snprintf(wq_name, sizeof(wq_name), "%s_%d_hpsa", name, h->ctlr);
+ wq = alloc_ordered_workqueue(wq_name, 0);
+ if (!wq)
+ dev_err(&h->pdev->dev, "failed to create %s workqueue\n", name);
+
+ return wq;
+}
+
static int hpsa_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
{
int dac, rc;
@@ -6898,13 +6877,23 @@ reinit_after_soft_reset:
h->pdev = pdev;
h->intr_mode = hpsa_simple_mode ? SIMPLE_MODE_INT : PERF_MODE_INT;
- INIT_LIST_HEAD(&h->cmpQ);
- INIT_LIST_HEAD(&h->reqQ);
INIT_LIST_HEAD(&h->offline_device_list);
spin_lock_init(&h->lock);
spin_lock_init(&h->offline_device_lock);
spin_lock_init(&h->scan_lock);
- spin_lock_init(&h->passthru_count_lock);
+ atomic_set(&h->passthru_cmds_avail, HPSA_MAX_CONCURRENT_PASSTHRUS);
+
+ h->rescan_ctlr_wq = hpsa_create_controller_wq(h, "rescan");
+ if (!h->rescan_ctlr_wq) {
+ rc = -ENOMEM;
+ goto clean1;
+ }
+
+ h->resubmit_wq = hpsa_create_controller_wq(h, "resubmit");
+ if (!h->resubmit_wq) {
+ rc = -ENOMEM;
+ goto clean1;
+ }
/* Allocate and clear per-cpu variable lockup_detected */
h->lockup_detected = alloc_percpu(u32);
@@ -6939,13 +6928,14 @@ reinit_after_soft_reset:
/* make sure the board interrupts are off */
h->access.set_intr_mask(h, HPSA_INTR_OFF);
- if (hpsa_request_irq(h, do_hpsa_intr_msi, do_hpsa_intr_intx))
+ if (hpsa_request_irqs(h, do_hpsa_intr_msi, do_hpsa_intr_intx))
goto clean2;
dev_info(&pdev->dev, "%s: <0x%x> at IRQ %d%s using DAC\n",
h->devname, pdev->device,
h->intr[h->intr_mode], dac ? "" : " not");
- if (hpsa_allocate_cmd_pool(h))
- goto clean4;
+ rc = hpsa_allocate_cmd_pool(h);
+ if (rc)
+ goto clean2_and_free_irqs;
if (hpsa_allocate_sg_chain_blocks(h))
goto clean4;
init_waitqueue_head(&h->scan_wait_queue);
@@ -6974,12 +6964,12 @@ reinit_after_soft_reset:
spin_lock_irqsave(&h->lock, flags);
h->access.set_intr_mask(h, HPSA_INTR_OFF);
spin_unlock_irqrestore(&h->lock, flags);
- free_irqs(h);
- rc = hpsa_request_irq(h, hpsa_msix_discard_completions,
+ hpsa_free_irqs(h);
+ rc = hpsa_request_irqs(h, hpsa_msix_discard_completions,
hpsa_intx_discard_completions);
if (rc) {
- dev_warn(&h->pdev->dev, "Failed to request_irq after "
- "soft reset.\n");
+ dev_warn(&h->pdev->dev,
+ "Failed to request_irq after soft reset.\n");
goto clean4;
}
@@ -7016,7 +7006,6 @@ reinit_after_soft_reset:
/* Enable Accelerated IO path at driver layer */
h->acciopath_status = 1;
- h->drv_req_rescan = 0;
/* Turn the interrupts on so we can service requests */
h->access.set_intr_mask(h, HPSA_INTR_ON);
@@ -7029,14 +7018,22 @@ reinit_after_soft_reset:
INIT_DELAYED_WORK(&h->monitor_ctlr_work, hpsa_monitor_ctlr_worker);
schedule_delayed_work(&h->monitor_ctlr_work,
h->heartbeat_sample_interval);
+ INIT_DELAYED_WORK(&h->rescan_ctlr_work, hpsa_rescan_ctlr_worker);
+ queue_delayed_work(h->rescan_ctlr_wq, &h->rescan_ctlr_work,
+ h->heartbeat_sample_interval);
return 0;
clean4:
hpsa_free_sg_chain_blocks(h);
hpsa_free_cmd_pool(h);
- free_irqs(h);
+clean2_and_free_irqs:
+ hpsa_free_irqs(h);
clean2:
clean1:
+ if (h->resubmit_wq)
+ destroy_workqueue(h->resubmit_wq);
+ if (h->rescan_ctlr_wq)
+ destroy_workqueue(h->rescan_ctlr_wq);
if (h->lockup_detected)
free_percpu(h->lockup_detected);
kfree(h);
@@ -7055,9 +7052,9 @@ static void hpsa_flush_cache(struct ctlr_info *h)
if (!flush_buf)
return;
- c = cmd_special_alloc(h);
+ c = cmd_alloc(h);
if (!c) {
- dev_warn(&h->pdev->dev, "cmd_special_alloc returned NULL!\n");
+ dev_warn(&h->pdev->dev, "cmd_alloc returned NULL!\n");
goto out_of_memory;
}
if (fill_cmd(c, HPSA_CACHE_FLUSH, h, flush_buf, 4, 0,
@@ -7069,7 +7066,7 @@ static void hpsa_flush_cache(struct ctlr_info *h)
out:
dev_warn(&h->pdev->dev,
"error flushing cache on controller\n");
- cmd_special_free(h, c);
+ cmd_free(h, c);
out_of_memory:
kfree(flush_buf);
}
@@ -7110,9 +7107,11 @@ static void hpsa_remove_one(struct pci_dev *pdev)
/* Get rid of any controller monitoring work items */
spin_lock_irqsave(&h->lock, flags);
h->remove_in_progress = 1;
- cancel_delayed_work(&h->monitor_ctlr_work);
spin_unlock_irqrestore(&h->lock, flags);
-
+ cancel_delayed_work_sync(&h->monitor_ctlr_work);
+ cancel_delayed_work_sync(&h->rescan_ctlr_work);
+ destroy_workqueue(h->rescan_ctlr_wq);
+ destroy_workqueue(h->resubmit_wq);
hpsa_unregister_scsi(h); /* unhook from SCSI subsystem */
hpsa_shutdown(pdev);
iounmap(h->vaddr);
@@ -7172,7 +7171,7 @@ static struct pci_driver hpsa_pci_driver = {
* bits of the command address.
*/
static void calc_bucket_map(int bucket[], int num_buckets,
- int nsgs, int min_blocks, int *bucket_map)
+ int nsgs, int min_blocks, u32 *bucket_map)
{
int i, j, b, size;
@@ -7193,7 +7192,8 @@ static void calc_bucket_map(int bucket[], int num_buckets,
}
}
-static void hpsa_enter_performant_mode(struct ctlr_info *h, u32 trans_support)
+/* return -ENODEV or other reason on error, 0 on success */
+static int hpsa_enter_performant_mode(struct ctlr_info *h, u32 trans_support)
{
int i;
unsigned long register_value;
@@ -7285,12 +7285,16 @@ static void hpsa_enter_performant_mode(struct ctlr_info *h, u32 trans_support)
}
}
writel(CFGTBL_ChangeReq, h->vaddr + SA5_DOORBELL);
- hpsa_wait_for_mode_change_ack(h);
+ if (hpsa_wait_for_mode_change_ack(h)) {
+ dev_err(&h->pdev->dev,
+ "performant mode problem - doorbell timeout\n");
+ return -ENODEV;
+ }
register_value = readl(&(h->cfgtable->TransportActive));
if (!(register_value & CFGTBL_Trans_Performant)) {
- dev_warn(&h->pdev->dev, "unable to get board into"
- " performant mode\n");
- return;
+ dev_err(&h->pdev->dev,
+ "performant mode problem - transport not active\n");
+ return -ENODEV;
}
/* Change the access methods to the performant access methods */
h->access = access;
@@ -7298,7 +7302,7 @@ static void hpsa_enter_performant_mode(struct ctlr_info *h, u32 trans_support)
if (!((trans_support & CFGTBL_Trans_io_accel1) ||
(trans_support & CFGTBL_Trans_io_accel2)))
- return;
+ return 0;
if (trans_support & CFGTBL_Trans_io_accel1) {
/* Set up I/O accelerator mode */
@@ -7328,12 +7332,12 @@ static void hpsa_enter_performant_mode(struct ctlr_info *h, u32 trans_support)
(i * sizeof(struct ErrorInfo)));
cp->err_info_len = sizeof(struct ErrorInfo);
cp->sgl_offset = IOACCEL1_SGLOFFSET;
- cp->host_context_flags = IOACCEL1_HCFLAGS_CISS_FORMAT;
+ cp->host_context_flags =
+ cpu_to_le16(IOACCEL1_HCFLAGS_CISS_FORMAT);
cp->timeout_sec = 0;
cp->ReplyQueue = 0;
cp->tag =
- cpu_to_le64((i << DIRECT_LOOKUP_SHIFT) |
- DIRECT_LOOKUP_BIT);
+ cpu_to_le64((i << DIRECT_LOOKUP_SHIFT));
cp->host_addr =
cpu_to_le64(h->ioaccel_cmd_pool_dhandle +
(i * sizeof(struct io_accel1_cmd)));
@@ -7362,7 +7366,12 @@ static void hpsa_enter_performant_mode(struct ctlr_info *h, u32 trans_support)
writel(bft2[i], &h->ioaccel2_bft2_regs[i]);
}
writel(CFGTBL_ChangeReq, h->vaddr + SA5_DOORBELL);
- hpsa_wait_for_mode_change_ack(h);
+ if (hpsa_wait_for_mode_change_ack(h)) {
+ dev_err(&h->pdev->dev,
+ "performant mode problem - enabling ioaccel mode\n");
+ return -ENODEV;
+ }
+ return 0;
}
static int hpsa_alloc_ioaccel_cmd_and_bft(struct ctlr_info *h)
@@ -7508,17 +7517,18 @@ static int is_accelerated_cmd(struct CommandList *c)
static void hpsa_drain_accel_commands(struct ctlr_info *h)
{
struct CommandList *c = NULL;
- unsigned long flags;
- int accel_cmds_out;
+ int i, accel_cmds_out;
+ int refcount;
- do { /* wait for all outstanding commands to drain out */
+ do { /* wait for all outstanding ioaccel commands to drain out */
accel_cmds_out = 0;
- spin_lock_irqsave(&h->lock, flags);
- list_for_each_entry(c, &h->cmpQ, list)
- accel_cmds_out += is_accelerated_cmd(c);
- list_for_each_entry(c, &h->reqQ, list)
- accel_cmds_out += is_accelerated_cmd(c);
- spin_unlock_irqrestore(&h->lock, flags);
+ for (i = 0; i < h->nr_cmds; i++) {
+ c = h->cmd_pool + i;
+ refcount = atomic_inc_return(&c->refcount);
+ if (refcount > 1) /* Command is allocated */
+ accel_cmds_out += is_accelerated_cmd(c);
+ cmd_free(h, c);
+ }
if (accel_cmds_out <= 0)
break;
msleep(100);
diff --git a/drivers/scsi/hpsa.h b/drivers/scsi/hpsa.h
index 8e06d9e280ec..657713050349 100644
--- a/drivers/scsi/hpsa.h
+++ b/drivers/scsi/hpsa.h
@@ -32,7 +32,6 @@ struct access_method {
void (*submit_command)(struct ctlr_info *h,
struct CommandList *c);
void (*set_intr_mask)(struct ctlr_info *h, unsigned long val);
- unsigned long (*fifo_full)(struct ctlr_info *h);
bool (*intr_pending)(struct ctlr_info *h);
unsigned long (*command_completed)(struct ctlr_info *h, u8 q);
};
@@ -47,6 +46,11 @@ struct hpsa_scsi_dev_t {
unsigned char model[16]; /* bytes 16-31 of inquiry data */
unsigned char raid_level; /* from inquiry page 0xC1 */
unsigned char volume_offline; /* discovered via TUR or VPD */
+ u16 queue_depth; /* max queue_depth for this device */
+ atomic_t ioaccel_cmds_out; /* Only used for physical devices
+ * counts commands sent to physical
+ * device via "ioaccel" path.
+ */
u32 ioaccel_handle;
int offload_config; /* I/O accel RAID offload configured */
int offload_enabled; /* I/O accel RAID offload enabled */
@@ -55,6 +59,15 @@ struct hpsa_scsi_dev_t {
*/
struct raid_map_data raid_map; /* I/O accelerator RAID map */
+ /*
+ * Pointers from logical drive map indices to the phys drives that
+ * make those logical drives. Note, multiple logical drives may
+ * share physical drives. You can have for instance 5 physical
+ * drives with 3 logical drives each using those same 5 physical
+ * disks. We need these pointers for counting i/o's out to physical
+ * devices in order to honor physical device queue depth limits.
+ */
+ struct hpsa_scsi_dev_t *phys_disk[RAID_MAP_MAX_ENTRIES];
};
struct reply_queue_buffer {
@@ -115,9 +128,12 @@ struct ctlr_info {
void __iomem *vaddr;
unsigned long paddr;
int nr_cmds; /* Number of commands allowed on this controller */
+#define HPSA_CMDS_RESERVED_FOR_ABORTS 2
+#define HPSA_CMDS_RESERVED_FOR_DRIVER 1
struct CfgTable __iomem *cfgtable;
int interrupts_enabled;
int max_commands;
+ int last_allocation;
atomic_t commands_outstanding;
# define PERF_MODE_INT 0
# define DOORBELL_INT 1
@@ -131,8 +147,6 @@ struct ctlr_info {
char hba_mode_enabled;
/* queue and queue Info */
- struct list_head reqQ;
- struct list_head cmpQ;
unsigned int Qdepth;
unsigned int maxSG;
spinlock_t lock;
@@ -168,9 +182,8 @@ struct ctlr_info {
unsigned long transMethod;
/* cap concurrent passthrus at some reasonable maximum */
-#define HPSA_MAX_CONCURRENT_PASSTHRUS (20)
- spinlock_t passthru_count_lock; /* protects passthru_count */
- int passthru_count;
+#define HPSA_MAX_CONCURRENT_PASSTHRUS (10)
+ atomic_t passthru_cmds_avail;
/*
* Performant mode completion buffers
@@ -194,8 +207,8 @@ struct ctlr_info {
atomic_t firmware_flash_in_progress;
u32 __percpu *lockup_detected;
struct delayed_work monitor_ctlr_work;
+ struct delayed_work rescan_ctlr_work;
int remove_in_progress;
- u32 fifo_recently_full;
/* Address of h->q[x] is passed to intr handler to know which queue */
u8 q[MAX_REPLY_QUEUES];
u32 TMFSupportFlags; /* cache what task mgmt funcs are supported. */
@@ -237,8 +250,9 @@ struct ctlr_info {
spinlock_t offline_device_lock;
struct list_head offline_device_list;
int acciopath_status;
- int drv_req_rescan; /* flag for driver to request rescan event */
int raid_offload_debug;
+ struct workqueue_struct *resubmit_wq;
+ struct workqueue_struct *rescan_ctlr_wq;
};
struct offline_device_entry {
@@ -297,6 +311,8 @@ struct offline_device_entry {
*/
#define SA5_DOORBELL 0x20
#define SA5_REQUEST_PORT_OFFSET 0x40
+#define SA5_REQUEST_PORT64_LO_OFFSET 0xC0
+#define SA5_REQUEST_PORT64_HI_OFFSET 0xC4
#define SA5_REPLY_INTR_MASK_OFFSET 0x34
#define SA5_REPLY_PORT_OFFSET 0x44
#define SA5_INTR_STATUS 0x30
@@ -353,10 +369,7 @@ static void SA5_submit_command_no_read(struct ctlr_info *h,
static void SA5_submit_command_ioaccel2(struct ctlr_info *h,
struct CommandList *c)
{
- if (c->cmd_type == CMD_IOACCEL2)
- writel(c->busaddr, h->vaddr + IOACCEL2_INBOUND_POSTQ_32);
- else
- writel(c->busaddr, h->vaddr + SA5_REQUEST_PORT_OFFSET);
+ writel(c->busaddr, h->vaddr + SA5_REQUEST_PORT_OFFSET);
}
/*
@@ -398,19 +411,19 @@ static unsigned long SA5_performant_completed(struct ctlr_info *h, u8 q)
unsigned long register_value = FIFO_EMPTY;
/* msi auto clears the interrupt pending bit. */
- if (!(h->msi_vector || h->msix_vector)) {
+ if (unlikely(!(h->msi_vector || h->msix_vector))) {
/* flush the controller write of the reply queue by reading
* outbound doorbell status register.
*/
- register_value = readl(h->vaddr + SA5_OUTDB_STATUS);
+ (void) readl(h->vaddr + SA5_OUTDB_STATUS);
writel(SA5_OUTDB_CLEAR_PERF_BIT, h->vaddr + SA5_OUTDB_CLEAR);
/* Do a read in order to flush the write to the controller
* (as per spec.)
*/
- register_value = readl(h->vaddr + SA5_OUTDB_STATUS);
+ (void) readl(h->vaddr + SA5_OUTDB_STATUS);
}
- if ((rq->head[rq->current_entry] & 1) == rq->wraparound) {
+ if ((((u32) rq->head[rq->current_entry]) & 1) == rq->wraparound) {
register_value = rq->head[rq->current_entry];
rq->current_entry++;
atomic_dec(&h->commands_outstanding);
@@ -426,14 +439,6 @@ static unsigned long SA5_performant_completed(struct ctlr_info *h, u8 q)
}
/*
- * Returns true if fifo is full.
- *
- */
-static unsigned long SA5_fifo_full(struct ctlr_info *h)
-{
- return atomic_read(&h->commands_outstanding) >= h->max_commands;
-}
-/*
* returns value read from hardware.
* returns FIFO_EMPTY if there is nothing to read
*/
@@ -473,9 +478,6 @@ static bool SA5_performant_intr_pending(struct ctlr_info *h)
if (!register_value)
return false;
- if (h->msi_vector || h->msix_vector)
- return true;
-
/* Read outbound doorbell to flush */
register_value = readl(h->vaddr + SA5_OUTDB_STATUS);
return register_value & SA5_OUTDB_STATUS_PERF_BIT;
@@ -525,7 +527,6 @@ static unsigned long SA5_ioaccel_mode1_completed(struct ctlr_info *h, u8 q)
static struct access_method SA5_access = {
SA5_submit_command,
SA5_intr_mask,
- SA5_fifo_full,
SA5_intr_pending,
SA5_completed,
};
@@ -533,7 +534,6 @@ static struct access_method SA5_access = {
static struct access_method SA5_ioaccel_mode1_access = {
SA5_submit_command,
SA5_performant_intr_mask,
- SA5_fifo_full,
SA5_ioaccel_mode1_intr_pending,
SA5_ioaccel_mode1_completed,
};
@@ -541,7 +541,6 @@ static struct access_method SA5_ioaccel_mode1_access = {
static struct access_method SA5_ioaccel_mode2_access = {
SA5_submit_command_ioaccel2,
SA5_performant_intr_mask,
- SA5_fifo_full,
SA5_performant_intr_pending,
SA5_performant_completed,
};
@@ -549,7 +548,6 @@ static struct access_method SA5_ioaccel_mode2_access = {
static struct access_method SA5_performant_access = {
SA5_submit_command,
SA5_performant_intr_mask,
- SA5_fifo_full,
SA5_performant_intr_pending,
SA5_performant_completed,
};
@@ -557,7 +555,6 @@ static struct access_method SA5_performant_access = {
static struct access_method SA5_performant_access_no_read = {
SA5_submit_command_no_read,
SA5_performant_intr_mask,
- SA5_fifo_full,
SA5_performant_intr_pending,
SA5_performant_completed,
};
diff --git a/drivers/scsi/hpsa_cmd.h b/drivers/scsi/hpsa_cmd.h
index cb988c41cad9..3a621c74b76f 100644
--- a/drivers/scsi/hpsa_cmd.h
+++ b/drivers/scsi/hpsa_cmd.h
@@ -206,27 +206,27 @@ struct raid_map_disk_data {
};
struct raid_map_data {
- u32 structure_size; /* Size of entire structure in bytes */
- u32 volume_blk_size; /* bytes / block in the volume */
- u64 volume_blk_cnt; /* logical blocks on the volume */
+ __le32 structure_size; /* Size of entire structure in bytes */
+ __le32 volume_blk_size; /* bytes / block in the volume */
+ __le64 volume_blk_cnt; /* logical blocks on the volume */
u8 phys_blk_shift; /* Shift factor to convert between
* units of logical blocks and physical
* disk blocks */
u8 parity_rotation_shift; /* Shift factor to convert between units
* of logical stripes and physical
* stripes */
- u16 strip_size; /* blocks used on each disk / stripe */
- u64 disk_starting_blk; /* First disk block used in volume */
- u64 disk_blk_cnt; /* disk blocks used by volume / disk */
- u16 data_disks_per_row; /* data disk entries / row in the map */
- u16 metadata_disks_per_row; /* mirror/parity disk entries / row
+ __le16 strip_size; /* blocks used on each disk / stripe */
+ __le64 disk_starting_blk; /* First disk block used in volume */
+ __le64 disk_blk_cnt; /* disk blocks used by volume / disk */
+ __le16 data_disks_per_row; /* data disk entries / row in the map */
+ __le16 metadata_disks_per_row;/* mirror/parity disk entries / row
* in the map */
- u16 row_cnt; /* rows in each layout map */
- u16 layout_map_count; /* layout maps (1 map per mirror/parity
+ __le16 row_cnt; /* rows in each layout map */
+ __le16 layout_map_count; /* layout maps (1 map per mirror/parity
* group) */
- u16 flags; /* Bit 0 set if encryption enabled */
+ __le16 flags; /* Bit 0 set if encryption enabled */
#define RAID_MAP_FLAG_ENCRYPT_ON 0x01
- u16 dekindex; /* Data encryption key index. */
+ __le16 dekindex; /* Data encryption key index. */
u8 reserved[16];
struct raid_map_disk_data data[RAID_MAP_MAX_ENTRIES];
};
@@ -240,6 +240,10 @@ struct ReportLUNdata {
struct ext_report_lun_entry {
u8 lunid[8];
+#define GET_BMIC_BUS(lunid) ((lunid)[7] & 0x3F)
+#define GET_BMIC_LEVEL_TWO_TARGET(lunid) ((lunid)[6])
+#define GET_BMIC_DRIVE_NUMBER(lunid) (((GET_BMIC_BUS((lunid)) - 1) << 8) + \
+ GET_BMIC_LEVEL_TWO_TARGET((lunid)))
u8 wwid[8];
u8 device_type;
u8 device_flags;
@@ -268,6 +272,7 @@ struct SenseSubsystem_info {
#define HPSA_CACHE_FLUSH 0x01 /* C2 was already being used by HPSA */
#define BMIC_FLASH_FIRMWARE 0xF7
#define BMIC_SENSE_CONTROLLER_PARAMETERS 0x64
+#define BMIC_IDENTIFY_PHYSICAL_DEVICE 0x15
/* Command List Structure */
union SCSI3Addr {
@@ -313,8 +318,8 @@ union LUNAddr {
struct CommandListHeader {
u8 ReplyQueue;
u8 SGList;
- u16 SGTotal;
- u64 tag;
+ __le16 SGTotal;
+ __le64 tag;
union LUNAddr LUN;
};
@@ -338,14 +343,14 @@ struct RequestBlock {
};
struct ErrDescriptor {
- u64 Addr;
- u32 Len;
+ __le64 Addr;
+ __le32 Len;
};
struct SGDescriptor {
- u64 Addr;
- u32 Len;
- u32 Ext;
+ __le64 Addr;
+ __le32 Len;
+ __le32 Ext;
};
union MoreErrInfo {
@@ -375,22 +380,19 @@ struct ErrorInfo {
#define CMD_IOACCEL1 0x04
#define CMD_IOACCEL2 0x05
-#define DIRECT_LOOKUP_SHIFT 5
-#define DIRECT_LOOKUP_BIT 0x10
+#define DIRECT_LOOKUP_SHIFT 4
#define DIRECT_LOOKUP_MASK (~((1 << DIRECT_LOOKUP_SHIFT) - 1))
#define HPSA_ERROR_BIT 0x02
struct ctlr_info; /* defined in hpsa.h */
-/* The size of this structure needs to be divisible by 32
- * on all architectures because low 5 bits of the addresses
+/* The size of this structure needs to be divisible by 128
+ * on all architectures. The low 4 bits of the addresses
* are used as follows:
*
* bit 0: to device, used to indicate "performant mode" command
* from device, indidcates error status.
* bit 1-3: to device, indicates block fetch table entry for
* reducing DMA in fetching commands from host memory.
- * bit 4: used to indicate whether tag is "direct lookup" (index),
- * or a bus address.
*/
#define COMMANDLIST_ALIGNMENT 128
@@ -405,9 +407,21 @@ struct CommandList {
struct ctlr_info *h;
int cmd_type;
long cmdindex;
- struct list_head list;
struct completion *waiting;
- void *scsi_cmd;
+ struct scsi_cmnd *scsi_cmd;
+ struct work_struct work;
+
+ /*
+ * For commands using either of the two "ioaccel" paths to
+ * bypass the RAID stack and go directly to the physical disk
+ * phys_disk is a pointer to the hpsa_scsi_dev_t to which the
+ * i/o is destined. We need to store that here because the command
+ * may potentially encounter TASK SET FULL and need to be resubmitted
+ * For "normal" i/o's not using the "ioaccel" paths, phys_disk is
+ * not used.
+ */
+ struct hpsa_scsi_dev_t *phys_disk;
+ atomic_t refcount; /* Must be last to avoid memset in cmd_alloc */
} __aligned(COMMANDLIST_ALIGNMENT);
/* Max S/G elements in I/O accelerator command */
@@ -420,7 +434,7 @@ struct CommandList {
*/
#define IOACCEL1_COMMANDLIST_ALIGNMENT 128
struct io_accel1_cmd {
- u16 dev_handle; /* 0x00 - 0x01 */
+ __le16 dev_handle; /* 0x00 - 0x01 */
u8 reserved1; /* 0x02 */
u8 function; /* 0x03 */
u8 reserved2[8]; /* 0x04 - 0x0B */
@@ -430,20 +444,20 @@ struct io_accel1_cmd {
u8 reserved4; /* 0x13 */
u8 sgl_offset; /* 0x14 */
u8 reserved5[7]; /* 0x15 - 0x1B */
- u32 transfer_len; /* 0x1C - 0x1F */
+ __le32 transfer_len; /* 0x1C - 0x1F */
u8 reserved6[4]; /* 0x20 - 0x23 */
- u16 io_flags; /* 0x24 - 0x25 */
+ __le16 io_flags; /* 0x24 - 0x25 */
u8 reserved7[14]; /* 0x26 - 0x33 */
u8 LUN[8]; /* 0x34 - 0x3B */
- u32 control; /* 0x3C - 0x3F */
+ __le32 control; /* 0x3C - 0x3F */
u8 CDB[16]; /* 0x40 - 0x4F */
u8 reserved8[16]; /* 0x50 - 0x5F */
- u16 host_context_flags; /* 0x60 - 0x61 */
- u16 timeout_sec; /* 0x62 - 0x63 */
+ __le16 host_context_flags; /* 0x60 - 0x61 */
+ __le16 timeout_sec; /* 0x62 - 0x63 */
u8 ReplyQueue; /* 0x64 */
u8 reserved9[3]; /* 0x65 - 0x67 */
- u64 tag; /* 0x68 - 0x6F */
- u64 host_addr; /* 0x70 - 0x77 */
+ __le64 tag; /* 0x68 - 0x6F */
+ __le64 host_addr; /* 0x70 - 0x77 */
u8 CISS_LUN[8]; /* 0x78 - 0x7F */
struct SGDescriptor SG[IOACCEL1_MAXSGENTRIES];
} __aligned(IOACCEL1_COMMANDLIST_ALIGNMENT);
@@ -470,8 +484,8 @@ struct io_accel1_cmd {
#define IOACCEL1_BUSADDR_CMDTYPE 0x00000060
struct ioaccel2_sg_element {
- u64 address;
- u32 length;
+ __le64 address;
+ __le32 length;
u8 reserved[3];
u8 chain_indicator;
#define IOACCEL2_CHAIN 0x80
@@ -526,20 +540,20 @@ struct io_accel2_cmd {
/* 0=off, 1=on */
u8 reply_queue; /* Reply Queue ID */
u8 reserved1; /* Reserved */
- u32 scsi_nexus; /* Device Handle */
- u32 Tag; /* cciss tag, lower 4 bytes only */
- u32 tweak_lower; /* Encryption tweak, lower 4 bytes */
+ __le32 scsi_nexus; /* Device Handle */
+ __le32 Tag; /* cciss tag, lower 4 bytes only */
+ __le32 tweak_lower; /* Encryption tweak, lower 4 bytes */
u8 cdb[16]; /* SCSI Command Descriptor Block */
u8 cciss_lun[8]; /* 8 byte SCSI address */
- u32 data_len; /* Total bytes to transfer */
+ __le32 data_len; /* Total bytes to transfer */
u8 cmd_priority_task_attr; /* priority and task attrs */
#define IOACCEL2_PRIORITY_MASK 0x78
#define IOACCEL2_ATTR_MASK 0x07
u8 sg_count; /* Number of sg elements */
- u16 dekindex; /* Data encryption key index */
- u64 err_ptr; /* Error Pointer */
- u32 err_len; /* Error Length*/
- u32 tweak_upper; /* Encryption tweak, upper 4 bytes */
+ __le16 dekindex; /* Data encryption key index */
+ __le64 err_ptr; /* Error Pointer */
+ __le32 err_len; /* Error Length*/
+ __le32 tweak_upper; /* Encryption tweak, upper 4 bytes */
struct ioaccel2_sg_element sg[IOACCEL2_MAXSGENTRIES];
struct io_accel2_scsi_response error_data;
} __aligned(IOACCEL2_COMMANDLIST_ALIGNMENT);
@@ -563,18 +577,18 @@ struct hpsa_tmf_struct {
u8 reserved1; /* byte 3 Reserved */
u32 it_nexus; /* SCSI I-T Nexus */
u8 lun_id[8]; /* LUN ID for TMF request */
- u64 tag; /* cciss tag associated w/ request */
- u64 abort_tag; /* cciss tag of SCSI cmd or task to abort */
- u64 error_ptr; /* Error Pointer */
- u32 error_len; /* Error Length */
+ __le64 tag; /* cciss tag associated w/ request */
+ __le64 abort_tag; /* cciss tag of SCSI cmd or TMF to abort */
+ __le64 error_ptr; /* Error Pointer */
+ __le32 error_len; /* Error Length */
};
/* Configuration Table Structure */
struct HostWrite {
- u32 TransportRequest;
- u32 command_pool_addr_hi;
- u32 CoalIntDelay;
- u32 CoalIntCount;
+ __le32 TransportRequest;
+ __le32 command_pool_addr_hi;
+ __le32 CoalIntDelay;
+ __le32 CoalIntCount;
};
#define SIMPLE_MODE 0x02
@@ -585,54 +599,54 @@ struct HostWrite {
#define DRIVER_SUPPORT_UA_ENABLE 0x00000001
struct CfgTable {
- u8 Signature[4];
- u32 SpecValence;
- u32 TransportSupport;
- u32 TransportActive;
- struct HostWrite HostWrite;
- u32 CmdsOutMax;
- u32 BusTypes;
- u32 TransMethodOffset;
- u8 ServerName[16];
- u32 HeartBeat;
- u32 driver_support;
-#define ENABLE_SCSI_PREFETCH 0x100
-#define ENABLE_UNIT_ATTN 0x01
- u32 MaxScatterGatherElements;
- u32 MaxLogicalUnits;
- u32 MaxPhysicalDevices;
- u32 MaxPhysicalDrivesPerLogicalUnit;
- u32 MaxPerformantModeCommands;
- u32 MaxBlockFetch;
- u32 PowerConservationSupport;
- u32 PowerConservationEnable;
- u32 TMFSupportFlags;
+ u8 Signature[4];
+ __le32 SpecValence;
+ __le32 TransportSupport;
+ __le32 TransportActive;
+ struct HostWrite HostWrite;
+ __le32 CmdsOutMax;
+ __le32 BusTypes;
+ __le32 TransMethodOffset;
+ u8 ServerName[16];
+ __le32 HeartBeat;
+ __le32 driver_support;
+#define ENABLE_SCSI_PREFETCH 0x100
+#define ENABLE_UNIT_ATTN 0x01
+ __le32 MaxScatterGatherElements;
+ __le32 MaxLogicalUnits;
+ __le32 MaxPhysicalDevices;
+ __le32 MaxPhysicalDrivesPerLogicalUnit;
+ __le32 MaxPerformantModeCommands;
+ __le32 MaxBlockFetch;
+ __le32 PowerConservationSupport;
+ __le32 PowerConservationEnable;
+ __le32 TMFSupportFlags;
u8 TMFTagMask[8];
u8 reserved[0x78 - 0x70];
- u32 misc_fw_support; /* offset 0x78 */
-#define MISC_FW_DOORBELL_RESET (0x02)
-#define MISC_FW_DOORBELL_RESET2 (0x010)
-#define MISC_FW_RAID_OFFLOAD_BASIC (0x020)
-#define MISC_FW_EVENT_NOTIFY (0x080)
+ __le32 misc_fw_support; /* offset 0x78 */
+#define MISC_FW_DOORBELL_RESET 0x02
+#define MISC_FW_DOORBELL_RESET2 0x010
+#define MISC_FW_RAID_OFFLOAD_BASIC 0x020
+#define MISC_FW_EVENT_NOTIFY 0x080
u8 driver_version[32];
- u32 max_cached_write_size;
- u8 driver_scratchpad[16];
- u32 max_error_info_length;
- u32 io_accel_max_embedded_sg_count;
- u32 io_accel_request_size_offset;
- u32 event_notify;
-#define HPSA_EVENT_NOTIFY_ACCEL_IO_PATH_STATE_CHANGE (1 << 30)
-#define HPSA_EVENT_NOTIFY_ACCEL_IO_PATH_CONFIG_CHANGE (1 << 31)
- u32 clear_event_notify;
+ __le32 max_cached_write_size;
+ u8 driver_scratchpad[16];
+ __le32 max_error_info_length;
+ __le32 io_accel_max_embedded_sg_count;
+ __le32 io_accel_request_size_offset;
+ __le32 event_notify;
+#define HPSA_EVENT_NOTIFY_ACCEL_IO_PATH_STATE_CHANGE (1 << 30)
+#define HPSA_EVENT_NOTIFY_ACCEL_IO_PATH_CONFIG_CHANGE (1 << 31)
+ __le32 clear_event_notify;
};
#define NUM_BLOCKFETCH_ENTRIES 8
struct TransTable_struct {
- u32 BlockFetch[NUM_BLOCKFETCH_ENTRIES];
- u32 RepQSize;
- u32 RepQCount;
- u32 RepQCtrAddrLow32;
- u32 RepQCtrAddrHigh32;
+ __le32 BlockFetch[NUM_BLOCKFETCH_ENTRIES];
+ __le32 RepQSize;
+ __le32 RepQCount;
+ __le32 RepQCtrAddrLow32;
+ __le32 RepQCtrAddrHigh32;
#define MAX_REPLY_QUEUES 64
struct vals32 RepQAddr[MAX_REPLY_QUEUES];
};
@@ -644,5 +658,137 @@ struct hpsa_pci_info {
u32 board_id;
};
+struct bmic_identify_physical_device {
+ u8 scsi_bus; /* SCSI Bus number on controller */
+ u8 scsi_id; /* SCSI ID on this bus */
+ __le16 block_size; /* sector size in bytes */
+ __le32 total_blocks; /* number for sectors on drive */
+ __le32 reserved_blocks; /* controller reserved (RIS) */
+ u8 model[40]; /* Physical Drive Model */
+ u8 serial_number[40]; /* Drive Serial Number */
+ u8 firmware_revision[8]; /* drive firmware revision */
+ u8 scsi_inquiry_bits; /* inquiry byte 7 bits */
+ u8 compaq_drive_stamp; /* 0 means drive not stamped */
+ u8 last_failure_reason;
+#define BMIC_LAST_FAILURE_TOO_SMALL_IN_LOAD_CONFIG 0x01
+#define BMIC_LAST_FAILURE_ERROR_ERASING_RIS 0x02
+#define BMIC_LAST_FAILURE_ERROR_SAVING_RIS 0x03
+#define BMIC_LAST_FAILURE_FAIL_DRIVE_COMMAND 0x04
+#define BMIC_LAST_FAILURE_MARK_BAD_FAILED 0x05
+#define BMIC_LAST_FAILURE_MARK_BAD_FAILED_IN_FINISH_REMAP 0x06
+#define BMIC_LAST_FAILURE_TIMEOUT 0x07
+#define BMIC_LAST_FAILURE_AUTOSENSE_FAILED 0x08
+#define BMIC_LAST_FAILURE_MEDIUM_ERROR_1 0x09
+#define BMIC_LAST_FAILURE_MEDIUM_ERROR_2 0x0a
+#define BMIC_LAST_FAILURE_NOT_READY_BAD_SENSE 0x0b
+#define BMIC_LAST_FAILURE_NOT_READY 0x0c
+#define BMIC_LAST_FAILURE_HARDWARE_ERROR 0x0d
+#define BMIC_LAST_FAILURE_ABORTED_COMMAND 0x0e
+#define BMIC_LAST_FAILURE_WRITE_PROTECTED 0x0f
+#define BMIC_LAST_FAILURE_SPIN_UP_FAILURE_IN_RECOVER 0x10
+#define BMIC_LAST_FAILURE_REBUILD_WRITE_ERROR 0x11
+#define BMIC_LAST_FAILURE_TOO_SMALL_IN_HOT_PLUG 0x12
+#define BMIC_LAST_FAILURE_BUS_RESET_RECOVERY_ABORTED 0x13
+#define BMIC_LAST_FAILURE_REMOVED_IN_HOT_PLUG 0x14
+#define BMIC_LAST_FAILURE_INIT_REQUEST_SENSE_FAILED 0x15
+#define BMIC_LAST_FAILURE_INIT_START_UNIT_FAILED 0x16
+#define BMIC_LAST_FAILURE_INQUIRY_FAILED 0x17
+#define BMIC_LAST_FAILURE_NON_DISK_DEVICE 0x18
+#define BMIC_LAST_FAILURE_READ_CAPACITY_FAILED 0x19
+#define BMIC_LAST_FAILURE_INVALID_BLOCK_SIZE 0x1a
+#define BMIC_LAST_FAILURE_HOT_PLUG_REQUEST_SENSE_FAILED 0x1b
+#define BMIC_LAST_FAILURE_HOT_PLUG_START_UNIT_FAILED 0x1c
+#define BMIC_LAST_FAILURE_WRITE_ERROR_AFTER_REMAP 0x1d
+#define BMIC_LAST_FAILURE_INIT_RESET_RECOVERY_ABORTED 0x1e
+#define BMIC_LAST_FAILURE_DEFERRED_WRITE_ERROR 0x1f
+#define BMIC_LAST_FAILURE_MISSING_IN_SAVE_RIS 0x20
+#define BMIC_LAST_FAILURE_WRONG_REPLACE 0x21
+#define BMIC_LAST_FAILURE_GDP_VPD_INQUIRY_FAILED 0x22
+#define BMIC_LAST_FAILURE_GDP_MODE_SENSE_FAILED 0x23
+#define BMIC_LAST_FAILURE_DRIVE_NOT_IN_48BIT_MODE 0x24
+#define BMIC_LAST_FAILURE_DRIVE_TYPE_MIX_IN_HOT_PLUG 0x25
+#define BMIC_LAST_FAILURE_DRIVE_TYPE_MIX_IN_LOAD_CFG 0x26
+#define BMIC_LAST_FAILURE_PROTOCOL_ADAPTER_FAILED 0x27
+#define BMIC_LAST_FAILURE_FAULTY_ID_BAY_EMPTY 0x28
+#define BMIC_LAST_FAILURE_FAULTY_ID_BAY_OCCUPIED 0x29
+#define BMIC_LAST_FAILURE_FAULTY_ID_INVALID_BAY 0x2a
+#define BMIC_LAST_FAILURE_WRITE_RETRIES_FAILED 0x2b
+
+#define BMIC_LAST_FAILURE_SMART_ERROR_REPORTED 0x37
+#define BMIC_LAST_FAILURE_PHY_RESET_FAILED 0x38
+#define BMIC_LAST_FAILURE_ONLY_ONE_CTLR_CAN_SEE_DRIVE 0x40
+#define BMIC_LAST_FAILURE_KC_VOLUME_FAILED 0x41
+#define BMIC_LAST_FAILURE_UNEXPECTED_REPLACEMENT 0x42
+#define BMIC_LAST_FAILURE_OFFLINE_ERASE 0x80
+#define BMIC_LAST_FAILURE_OFFLINE_TOO_SMALL 0x81
+#define BMIC_LAST_FAILURE_OFFLINE_DRIVE_TYPE_MIX 0x82
+#define BMIC_LAST_FAILURE_OFFLINE_ERASE_COMPLETE 0x83
+
+ u8 flags;
+ u8 more_flags;
+ u8 scsi_lun; /* SCSI LUN for phys drive */
+ u8 yet_more_flags;
+ u8 even_more_flags;
+ __le32 spi_speed_rules;/* SPI Speed data:Ultra disable diagnose */
+ u8 phys_connector[2]; /* connector number on controller */
+ u8 phys_box_on_bus; /* phys enclosure this drive resides */
+ u8 phys_bay_in_box; /* phys drv bay this drive resides */
+ __le32 rpm; /* Drive rotational speed in rpm */
+ u8 device_type; /* type of drive */
+ u8 sata_version; /* only valid when drive_type is SATA */
+ __le64 big_total_block_count;
+ __le64 ris_starting_lba;
+ __le32 ris_size;
+ u8 wwid[20];
+ u8 controller_phy_map[32];
+ __le16 phy_count;
+ u8 phy_connected_dev_type[256];
+ u8 phy_to_drive_bay_num[256];
+ __le16 phy_to_attached_dev_index[256];
+ u8 box_index;
+ u8 reserved;
+ __le16 extra_physical_drive_flags;
+#define BMIC_PHYS_DRIVE_SUPPORTS_GAS_GAUGE(idphydrv) \
+ (idphydrv->extra_physical_drive_flags & (1 << 10))
+ u8 negotiated_link_rate[256];
+ u8 phy_to_phy_map[256];
+ u8 redundant_path_present_map;
+ u8 redundant_path_failure_map;
+ u8 active_path_number;
+ __le16 alternate_paths_phys_connector[8];
+ u8 alternate_paths_phys_box_on_port[8];
+ u8 multi_lun_device_lun_count;
+ u8 minimum_good_fw_revision[8];
+ u8 unique_inquiry_bytes[20];
+ u8 current_temperature_degreesC;
+ u8 temperature_threshold_degreesC;
+ u8 max_temperature_degreesC;
+ u8 logical_blocks_per_phys_block_exp; /* phyblocksize = 512*2^exp */
+ __le16 current_queue_depth_limit;
+ u8 switch_name[10];
+ __le16 switch_port;
+ u8 alternate_paths_switch_name[40];
+ u8 alternate_paths_switch_port[8];
+ __le16 power_on_hours; /* valid only if gas gauge supported */
+ __le16 percent_endurance_used; /* valid only if gas gauge supported. */
+#define BMIC_PHYS_DRIVE_SSD_WEAROUT(idphydrv) \
+ ((idphydrv->percent_endurance_used & 0x80) || \
+ (idphydrv->percent_endurance_used > 10000))
+ u8 drive_authentication;
+#define BMIC_PHYS_DRIVE_AUTHENTICATED(idphydrv) \
+ (idphydrv->drive_authentication == 0x80)
+ u8 smart_carrier_authentication;
+#define BMIC_SMART_CARRIER_AUTHENTICATION_SUPPORTED(idphydrv) \
+ (idphydrv->smart_carrier_authentication != 0x0)
+#define BMIC_SMART_CARRIER_AUTHENTICATED(idphydrv) \
+ (idphydrv->smart_carrier_authentication == 0x01)
+ u8 smart_carrier_app_fw_version;
+ u8 smart_carrier_bootloader_fw_version;
+ u8 encryption_key_name[64];
+ __le32 misc_drive_flags;
+ __le16 dek_index;
+ u8 padding[112];
+};
+
#pragma pack()
#endif /* HPSA_CMD_H */
diff --git a/drivers/scsi/in2000.c b/drivers/scsi/in2000.c
index ddf0694d87f0..3882d9f519c8 100644
--- a/drivers/scsi/in2000.c
+++ b/drivers/scsi/in2000.c
@@ -2226,36 +2226,36 @@ static int in2000_show_info(struct seq_file *m, struct Scsi_Host *instance)
if (hd->proc & PR_INFO) {
seq_printf(m, "\ndip_switch=%02x: irq=%d io=%02x floppy=%s sync/DOS5=%s", (hd->dip_switch & 0x7f), instance->irq, hd->io_base, (hd->dip_switch & 0x40) ? "Yes" : "No", (hd->dip_switch & 0x20) ? "Yes" : "No");
- seq_printf(m, "\nsync_xfer[] = ");
+ seq_puts(m, "\nsync_xfer[] = ");
for (x = 0; x < 7; x++)
seq_printf(m, "\t%02x", hd->sync_xfer[x]);
- seq_printf(m, "\nsync_stat[] = ");
+ seq_puts(m, "\nsync_stat[] = ");
for (x = 0; x < 7; x++)
seq_printf(m, "\t%02x", hd->sync_stat[x]);
}
#ifdef PROC_STATISTICS
if (hd->proc & PR_STATISTICS) {
- seq_printf(m, "\ncommands issued: ");
+ seq_puts(m, "\ncommands issued: ");
for (x = 0; x < 7; x++)
seq_printf(m, "\t%ld", hd->cmd_cnt[x]);
- seq_printf(m, "\ndisconnects allowed:");
+ seq_puts(m, "\ndisconnects allowed:");
for (x = 0; x < 7; x++)
seq_printf(m, "\t%ld", hd->disc_allowed_cnt[x]);
- seq_printf(m, "\ndisconnects done: ");
+ seq_puts(m, "\ndisconnects done: ");
for (x = 0; x < 7; x++)
seq_printf(m, "\t%ld", hd->disc_done_cnt[x]);
seq_printf(m, "\ninterrupts: \t%ld", hd->int_cnt);
}
#endif
if (hd->proc & PR_CONNECTED) {
- seq_printf(m, "\nconnected: ");
+ seq_puts(m, "\nconnected: ");
if (hd->connected) {
cmd = (Scsi_Cmnd *) hd->connected;
seq_printf(m, " %d:%llu(%02x)", cmd->device->id, cmd->device->lun, cmd->cmnd[0]);
}
}
if (hd->proc & PR_INPUTQ) {
- seq_printf(m, "\ninput_Q: ");
+ seq_puts(m, "\ninput_Q: ");
cmd = (Scsi_Cmnd *) hd->input_Q;
while (cmd) {
seq_printf(m, " %d:%llu(%02x)", cmd->device->id, cmd->device->lun, cmd->cmnd[0]);
@@ -2263,7 +2263,7 @@ static int in2000_show_info(struct seq_file *m, struct Scsi_Host *instance)
}
}
if (hd->proc & PR_DISCQ) {
- seq_printf(m, "\ndisconnected_Q:");
+ seq_puts(m, "\ndisconnected_Q:");
cmd = (Scsi_Cmnd *) hd->disconnected_Q;
while (cmd) {
seq_printf(m, " %d:%llu(%02x)", cmd->device->id, cmd->device->lun, cmd->cmnd[0]);
@@ -2273,7 +2273,7 @@ static int in2000_show_info(struct seq_file *m, struct Scsi_Host *instance)
if (hd->proc & PR_TEST) {
; /* insert your own custom function here */
}
- seq_printf(m, "\n");
+ seq_putc(m, '\n');
spin_unlock_irqrestore(instance->host_lock, flags);
#endif /* PROC_INTERFACE */
return 0;
diff --git a/drivers/scsi/ips.c b/drivers/scsi/ips.c
index e5c28435d768..7542f11d3fcd 100644
--- a/drivers/scsi/ips.c
+++ b/drivers/scsi/ips.c
@@ -2038,15 +2038,14 @@ ips_host_info(ips_ha_t *ha, struct seq_file *m)
{
METHOD_TRACE("ips_host_info", 1);
- seq_printf(m, "\nIBM ServeRAID General Information:\n\n");
+ seq_puts(m, "\nIBM ServeRAID General Information:\n\n");
if ((le32_to_cpu(ha->nvram->signature) == IPS_NVRAM_P5_SIG) &&
(le16_to_cpu(ha->nvram->adapter_type) != 0))
seq_printf(m, "\tController Type : %s\n",
ips_adapter_name[ha->ad_type - 1]);
else
- seq_printf(m,
- "\tController Type : Unknown\n");
+ seq_puts(m, "\tController Type : Unknown\n");
if (ha->io_addr)
seq_printf(m,
@@ -2138,7 +2137,7 @@ ips_host_info(ips_ha_t *ha, struct seq_file *m)
seq_printf(m, "\tCurrent Active PT Commands : %d\n",
ha->num_ioctl);
- seq_printf(m, "\n");
+ seq_putc(m, '\n');
return 0;
}
diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index 4c25485aa934..c66088d0fd2a 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -2225,6 +2225,15 @@ lpfc_adisc_done(struct lpfc_vport *vport)
if ((phba->sli3_options & LPFC_SLI3_NPIV_ENABLED) &&
!(vport->fc_flag & FC_RSCN_MODE) &&
(phba->sli_rev < LPFC_SLI_REV4)) {
+ /* The ADISCs are complete. Doesn't matter if they
+ * succeeded or failed because the ADISC completion
+ * routine guarantees to call the state machine and
+ * the RPI is either unregistered (failed ADISC response)
+ * or the RPI is still valid and the node is marked
+ * mapped for a target. The exchanges should be in the
+ * correct state. This code is specific to SLI3.
+ */
+ lpfc_issue_clear_la(phba, vport);
lpfc_issue_reg_vpi(phba, vport);
return;
}
diff --git a/drivers/scsi/megaraid.c b/drivers/scsi/megaraid.c
index 2485255f3414..bc7b34c02723 100644
--- a/drivers/scsi/megaraid.c
+++ b/drivers/scsi/megaraid.c
@@ -2240,7 +2240,7 @@ proc_show_battery(struct seq_file *m, void *v)
goto free_pdev;
if( mega_adapinq(adapter, dma_handle) != 0 ) {
- seq_printf(m, "Adapter inquiry failed.\n");
+ seq_puts(m, "Adapter inquiry failed.\n");
printk(KERN_WARNING "megaraid: inquiry failed.\n");
goto free_inquiry;
}
diff --git a/drivers/scsi/megaraid/megaraid_sas.h b/drivers/scsi/megaraid/megaraid_sas.h
index 0d44d91c2fce..14e5c7cea929 100644
--- a/drivers/scsi/megaraid/megaraid_sas.h
+++ b/drivers/scsi/megaraid/megaraid_sas.h
@@ -35,7 +35,7 @@
/*
* MegaRAID SAS Driver meta data
*/
-#define MEGASAS_VERSION "06.805.06.01-rc1"
+#define MEGASAS_VERSION "06.806.08.00-rc1"
/*
* Device IDs
@@ -969,7 +969,20 @@ struct megasas_ctrl_info {
struct {
#if defined(__BIG_ENDIAN_BITFIELD)
- u32 reserved:25;
+ u32 reserved:12;
+ u32 discardCacheDuringLDDelete:1;
+ u32 supportSecurityonJBOD:1;
+ u32 supportCacheBypassModes:1;
+ u32 supportDisableSESMonitoring:1;
+ u32 supportForceFlash:1;
+ u32 supportNVDRAM:1;
+ u32 supportDrvActivityLEDSetting:1;
+ u32 supportAllowedOpsforDrvRemoval:1;
+ u32 supportHOQRebuild:1;
+ u32 supportForceTo512e:1;
+ u32 supportNVCacheErase:1;
+ u32 supportDebugQueue:1;
+ u32 supportSwZone:1;
u32 supportCrashDump:1;
u32 supportMaxExtLDs:1;
u32 supportT10RebuildAssist:1;
@@ -981,9 +994,22 @@ struct megasas_ctrl_info {
u32 supportThermalPollInterval:1;
u32 supportDisableImmediateIO:1;
u32 supportT10RebuildAssist:1;
- u32 supportMaxExtLDs:1;
- u32 supportCrashDump:1;
- u32 reserved:25;
+ u32 supportMaxExtLDs:1;
+ u32 supportCrashDump:1;
+ u32 supportSwZone:1;
+ u32 supportDebugQueue:1;
+ u32 supportNVCacheErase:1;
+ u32 supportForceTo512e:1;
+ u32 supportHOQRebuild:1;
+ u32 supportAllowedOpsforDrvRemoval:1;
+ u32 supportDrvActivityLEDSetting:1;
+ u32 supportNVDRAM:1;
+ u32 supportForceFlash:1;
+ u32 supportDisableSESMonitoring:1;
+ u32 supportCacheBypassModes:1;
+ u32 supportSecurityonJBOD:1;
+ u32 discardCacheDuringLDDelete:1;
+ u32 reserved:12;
#endif
} adapterOperations3;
@@ -1022,6 +1048,13 @@ enum MR_MFI_MPT_PTHR_FLAGS {
MFI_MPT_ATTACHED = 2,
};
+enum MR_SCSI_CMD_TYPE {
+ READ_WRITE_LDIO = 0,
+ NON_READ_WRITE_LDIO = 1,
+ READ_WRITE_SYSPDIO = 2,
+ NON_READ_WRITE_SYSPDIO = 3,
+};
+
/* Frame Type */
#define IO_FRAME 0
#define PTHRU_FRAME 1
@@ -1049,6 +1082,8 @@ enum MR_MFI_MPT_PTHR_FLAGS {
*/
#define MEGASAS_INT_CMDS 32
#define MEGASAS_SKINNY_INT_CMDS 5
+#define MEGASAS_FUSION_INTERNAL_CMDS 5
+#define MEGASAS_FUSION_IOCTL_CMDS 3
#define MEGASAS_MAX_MSIX_QUEUES 128
/*
@@ -1194,19 +1229,23 @@ union megasas_sgl_frame {
typedef union _MFI_CAPABILITIES {
struct {
#if defined(__BIG_ENDIAN_BITFIELD)
- u32 reserved:27;
+ u32 reserved:25;
+ u32 security_protocol_cmds_fw:1;
+ u32 support_core_affinity:1;
u32 support_ndrive_r1_lb:1;
u32 support_max_255lds:1;
- u32 reserved1:1;
+ u32 support_fastpath_wb:1;
u32 support_additional_msix:1;
u32 support_fp_remote_lun:1;
#else
u32 support_fp_remote_lun:1;
u32 support_additional_msix:1;
- u32 reserved1:1;
+ u32 support_fastpath_wb:1;
u32 support_max_255lds:1;
u32 support_ndrive_r1_lb:1;
- u32 reserved:27;
+ u32 support_core_affinity:1;
+ u32 security_protocol_cmds_fw:1;
+ u32 reserved:25;
#endif
} mfi_capabilities;
u32 reg;
@@ -1638,20 +1677,20 @@ struct megasas_instance {
u32 crash_dump_fw_support;
u32 crash_dump_drv_support;
u32 crash_dump_app_support;
+ u32 secure_jbod_support;
spinlock_t crashdump_lock;
struct megasas_register_set __iomem *reg_set;
u32 *reply_post_host_index_addr[MR_MAX_MSIX_REG_ARRAY];
struct megasas_pd_list pd_list[MEGASAS_MAX_PD];
struct megasas_pd_list local_pd_list[MEGASAS_MAX_PD];
- u8 ld_ids[MEGASAS_MAX_LD_IDS];
+ u8 ld_ids[MEGASAS_MAX_LD_IDS];
s8 init_id;
u16 max_num_sge;
u16 max_fw_cmds;
- /* For Fusion its num IOCTL cmds, for others MFI based its
- max_fw_cmds */
u16 max_mfi_cmds;
+ u16 max_scsi_cmds;
u32 max_sectors_per_req;
struct megasas_aen_event *ev;
@@ -1727,7 +1766,7 @@ struct megasas_instance {
u8 requestorId;
char PlasmaFW111;
char mpio;
- int throttlequeuedepth;
+ u16 throttlequeuedepth;
u8 mask_interrupts;
u8 is_imr;
};
@@ -1946,5 +1985,6 @@ void __megasas_return_cmd(struct megasas_instance *instance,
void megasas_return_mfi_mpt_pthr(struct megasas_instance *instance,
struct megasas_cmd *cmd_mfi, struct megasas_cmd_fusion *cmd_fusion);
+int megasas_cmd_type(struct scsi_cmnd *cmd);
#endif /*LSI_MEGARAID_SAS_H */
diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c
index ff283d23788a..890637fdd61e 100644
--- a/drivers/scsi/megaraid/megaraid_sas_base.c
+++ b/drivers/scsi/megaraid/megaraid_sas_base.c
@@ -78,7 +78,7 @@ static int allow_vf_ioctls;
module_param(allow_vf_ioctls, int, S_IRUGO);
MODULE_PARM_DESC(allow_vf_ioctls, "Allow ioctls in SR-IOV VF mode. Default: 0");
-static int throttlequeuedepth = MEGASAS_THROTTLE_QUEUE_DEPTH;
+static unsigned int throttlequeuedepth = MEGASAS_THROTTLE_QUEUE_DEPTH;
module_param(throttlequeuedepth, int, S_IRUGO);
MODULE_PARM_DESC(throttlequeuedepth,
"Adapter queue depth when throttled due to I/O timeout. Default: 16");
@@ -1417,16 +1417,15 @@ megasas_build_ldio(struct megasas_instance *instance, struct scsi_cmnd *scp,
}
/**
- * megasas_is_ldio - Checks if the cmd is for logical drive
+ * megasas_cmd_type - Checks if the cmd is for logical drive/sysPD
+ * and whether it's RW or non RW
* @scmd: SCSI command
*
- * Called by megasas_queue_command to find out if the command to be queued
- * is a logical drive command
*/
-inline int megasas_is_ldio(struct scsi_cmnd *cmd)
+inline int megasas_cmd_type(struct scsi_cmnd *cmd)
{
- if (!MEGASAS_IS_LOGICAL(cmd))
- return 0;
+ int ret;
+
switch (cmd->cmnd[0]) {
case READ_10:
case WRITE_10:
@@ -1436,10 +1435,14 @@ inline int megasas_is_ldio(struct scsi_cmnd *cmd)
case WRITE_6:
case READ_16:
case WRITE_16:
- return 1;
+ ret = (MEGASAS_IS_LOGICAL(cmd)) ?
+ READ_WRITE_LDIO : READ_WRITE_SYSPDIO;
+ break;
default:
- return 0;
+ ret = (MEGASAS_IS_LOGICAL(cmd)) ?
+ NON_READ_WRITE_LDIO : NON_READ_WRITE_SYSPDIO;
}
+ return ret;
}
/**
@@ -1471,7 +1474,7 @@ megasas_dump_pending_frames(struct megasas_instance *instance)
if(!cmd->scmd)
continue;
printk(KERN_ERR "megasas[%d]: Frame addr :0x%08lx : ",instance->host->host_no,(unsigned long)cmd->frame_phys_addr);
- if (megasas_is_ldio(cmd->scmd)){
+ if (megasas_cmd_type(cmd->scmd) == READ_WRITE_LDIO) {
ldio = (struct megasas_io_frame *)cmd->frame;
mfi_sgl = &ldio->sgl;
sgcount = ldio->sge_count;
@@ -1531,7 +1534,7 @@ megasas_build_and_issue_cmd(struct megasas_instance *instance,
/*
* Logical drive command
*/
- if (megasas_is_ldio(scmd))
+ if (megasas_cmd_type(scmd) == READ_WRITE_LDIO)
frame_count = megasas_build_ldio(instance, scmd, cmd);
else
frame_count = megasas_build_dcdb(instance, scmd, cmd);
@@ -1689,22 +1692,66 @@ static int megasas_slave_alloc(struct scsi_device *sdev)
return 0;
}
+/*
+* megasas_complete_outstanding_ioctls - Complete outstanding ioctls after a
+* kill adapter
+* @instance: Adapter soft state
+*
+*/
+void megasas_complete_outstanding_ioctls(struct megasas_instance *instance)
+{
+ int i;
+ struct megasas_cmd *cmd_mfi;
+ struct megasas_cmd_fusion *cmd_fusion;
+ struct fusion_context *fusion = instance->ctrl_context;
+
+ /* Find all outstanding ioctls */
+ if (fusion) {
+ for (i = 0; i < instance->max_fw_cmds; i++) {
+ cmd_fusion = fusion->cmd_list[i];
+ if (cmd_fusion->sync_cmd_idx != (u32)ULONG_MAX) {
+ cmd_mfi = instance->cmd_list[cmd_fusion->sync_cmd_idx];
+ if (cmd_mfi->sync_cmd &&
+ cmd_mfi->frame->hdr.cmd != MFI_CMD_ABORT)
+ megasas_complete_cmd(instance,
+ cmd_mfi, DID_OK);
+ }
+ }
+ } else {
+ for (i = 0; i < instance->max_fw_cmds; i++) {
+ cmd_mfi = instance->cmd_list[i];
+ if (cmd_mfi->sync_cmd && cmd_mfi->frame->hdr.cmd !=
+ MFI_CMD_ABORT)
+ megasas_complete_cmd(instance, cmd_mfi, DID_OK);
+ }
+ }
+}
+
+
void megaraid_sas_kill_hba(struct megasas_instance *instance)
{
+ /* Set critical error to block I/O & ioctls in case caller didn't */
+ instance->adprecovery = MEGASAS_HW_CRITICAL_ERROR;
+ /* Wait 1 second to ensure IO or ioctls in build have posted */
+ msleep(1000);
if ((instance->pdev->device == PCI_DEVICE_ID_LSI_SAS0073SKINNY) ||
- (instance->pdev->device == PCI_DEVICE_ID_LSI_SAS0071SKINNY) ||
- (instance->pdev->device == PCI_DEVICE_ID_LSI_FUSION) ||
- (instance->pdev->device == PCI_DEVICE_ID_LSI_PLASMA) ||
- (instance->pdev->device == PCI_DEVICE_ID_LSI_INVADER) ||
- (instance->pdev->device == PCI_DEVICE_ID_LSI_FURY)) {
- writel(MFI_STOP_ADP, &instance->reg_set->doorbell);
+ (instance->pdev->device == PCI_DEVICE_ID_LSI_SAS0071SKINNY) ||
+ (instance->pdev->device == PCI_DEVICE_ID_LSI_FUSION) ||
+ (instance->pdev->device == PCI_DEVICE_ID_LSI_PLASMA) ||
+ (instance->pdev->device == PCI_DEVICE_ID_LSI_INVADER) ||
+ (instance->pdev->device == PCI_DEVICE_ID_LSI_FURY)) {
+ writel(MFI_STOP_ADP,
+ &instance->reg_set->doorbell);
/* Flush */
readl(&instance->reg_set->doorbell);
if (instance->mpio && instance->requestorId)
memset(instance->ld_ids, 0xff, MEGASAS_MAX_LD_IDS);
} else {
- writel(MFI_STOP_ADP, &instance->reg_set->inbound_doorbell);
+ writel(MFI_STOP_ADP,
+ &instance->reg_set->inbound_doorbell);
}
+ /* Complete outstanding ioctls when adapter is killed */
+ megasas_complete_outstanding_ioctls(instance);
}
/**
@@ -1717,6 +1764,7 @@ void
megasas_check_and_restore_queue_depth(struct megasas_instance *instance)
{
unsigned long flags;
+
if (instance->flag & MEGASAS_FW_BUSY
&& time_after(jiffies, instance->last_time + 5 * HZ)
&& atomic_read(&instance->fw_outstanding) <
@@ -1724,13 +1772,8 @@ megasas_check_and_restore_queue_depth(struct megasas_instance *instance)
spin_lock_irqsave(instance->host->host_lock, flags);
instance->flag &= ~MEGASAS_FW_BUSY;
- if (instance->is_imr) {
- instance->host->can_queue =
- instance->max_fw_cmds - MEGASAS_SKINNY_INT_CMDS;
- } else
- instance->host->can_queue =
- instance->max_fw_cmds - MEGASAS_INT_CMDS;
+ instance->host->can_queue = instance->max_scsi_cmds;
spin_unlock_irqrestore(instance->host->host_lock, flags);
}
}
@@ -3028,10 +3071,9 @@ megasas_issue_pending_cmds_again(struct megasas_instance *instance)
"was tried multiple times during reset."
"Shutting down the HBA\n",
cmd, cmd->scmd, cmd->sync_cmd);
+ instance->instancet->disable_intr(instance);
+ atomic_set(&instance->fw_reset_no_pci_access, 1);
megaraid_sas_kill_hba(instance);
-
- instance->adprecovery =
- MEGASAS_HW_CRITICAL_ERROR;
return;
}
}
@@ -3165,8 +3207,8 @@ process_fw_state_change_wq(struct work_struct *work)
if (megasas_transition_to_ready(instance, 1)) {
printk(KERN_NOTICE "megaraid_sas:adapter not ready\n");
+ atomic_set(&instance->fw_reset_no_pci_access, 1);
megaraid_sas_kill_hba(instance);
- instance->adprecovery = MEGASAS_HW_CRITICAL_ERROR;
return ;
}
@@ -3547,7 +3589,6 @@ static int megasas_create_frame_pool(struct megasas_instance *instance)
int i;
u32 max_cmd;
u32 sge_sz;
- u32 sgl_sz;
u32 total_sz;
u32 frame_count;
struct megasas_cmd *cmd;
@@ -3566,24 +3607,23 @@ static int megasas_create_frame_pool(struct megasas_instance *instance)
}
/*
- * Calculated the number of 64byte frames required for SGL
- */
- sgl_sz = sge_sz * instance->max_num_sge;
- frame_count = (sgl_sz + MEGAMFI_FRAME_SIZE - 1) / MEGAMFI_FRAME_SIZE;
- frame_count = 15;
-
- /*
- * We need one extra frame for the MFI command
+ * For MFI controllers.
+ * max_num_sge = 60
+ * max_sge_sz = 16 byte (sizeof megasas_sge_skinny)
+ * Total 960 byte (15 MFI frame of 64 byte)
+ *
+ * Fusion adapter require only 3 extra frame.
+ * max_num_sge = 16 (defined as MAX_IOCTL_SGE)
+ * max_sge_sz = 12 byte (sizeof megasas_sge64)
+ * Total 192 byte (3 MFI frame of 64 byte)
*/
- frame_count++;
-
+ frame_count = instance->ctrl_context ? (3 + 1) : (15 + 1);
total_sz = MEGAMFI_FRAME_SIZE * frame_count;
/*
* Use DMA pool facility provided by PCI layer
*/
instance->frame_dma_pool = pci_pool_create("megasas frame pool",
- instance->pdev, total_sz, 64,
- 0);
+ instance->pdev, total_sz, 256, 0);
if (!instance->frame_dma_pool) {
printk(KERN_DEBUG "megasas: failed to setup frame pool\n");
@@ -4631,28 +4671,48 @@ static int megasas_init_fw(struct megasas_instance *instance)
instance->crash_dump_h);
instance->crash_dump_buf = NULL;
}
+
+ instance->secure_jbod_support =
+ ctrl_info->adapterOperations3.supportSecurityonJBOD;
+ if (instance->secure_jbod_support)
+ dev_info(&instance->pdev->dev, "Firmware supports Secure JBOD\n");
instance->max_sectors_per_req = instance->max_num_sge *
PAGE_SIZE / 512;
if (tmp_sectors && (instance->max_sectors_per_req > tmp_sectors))
instance->max_sectors_per_req = tmp_sectors;
- /* Check for valid throttlequeuedepth module parameter */
- if (instance->is_imr) {
- if (throttlequeuedepth > (instance->max_fw_cmds -
- MEGASAS_SKINNY_INT_CMDS))
- instance->throttlequeuedepth =
- MEGASAS_THROTTLE_QUEUE_DEPTH;
- else
- instance->throttlequeuedepth = throttlequeuedepth;
+ /*
+ * 1. For fusion adapters, 3 commands for IOCTL and 5 commands
+ * for driver's internal DCMDs.
+ * 2. For MFI skinny adapters, 5 commands for IOCTL + driver's
+ * internal DCMDs.
+ * 3. For rest of MFI adapters, 27 commands reserved for IOCTLs
+ * and 5 commands for drivers's internal DCMD.
+ */
+ if (instance->ctrl_context) {
+ instance->max_scsi_cmds = instance->max_fw_cmds -
+ (MEGASAS_FUSION_INTERNAL_CMDS +
+ MEGASAS_FUSION_IOCTL_CMDS);
+ sema_init(&instance->ioctl_sem, MEGASAS_FUSION_IOCTL_CMDS);
+ } else if ((instance->pdev->device == PCI_DEVICE_ID_LSI_SAS0073SKINNY) ||
+ (instance->pdev->device == PCI_DEVICE_ID_LSI_SAS0071SKINNY)) {
+ instance->max_scsi_cmds = instance->max_fw_cmds -
+ MEGASAS_SKINNY_INT_CMDS;
+ sema_init(&instance->ioctl_sem, MEGASAS_SKINNY_INT_CMDS);
} else {
- if (throttlequeuedepth > (instance->max_fw_cmds -
- MEGASAS_INT_CMDS))
- instance->throttlequeuedepth =
- MEGASAS_THROTTLE_QUEUE_DEPTH;
- else
- instance->throttlequeuedepth = throttlequeuedepth;
+ instance->max_scsi_cmds = instance->max_fw_cmds -
+ MEGASAS_INT_CMDS;
+ sema_init(&instance->ioctl_sem, (MEGASAS_INT_CMDS - 5));
}
+ /* Check for valid throttlequeuedepth module parameter */
+ if (throttlequeuedepth &&
+ throttlequeuedepth <= instance->max_scsi_cmds)
+ instance->throttlequeuedepth = throttlequeuedepth;
+ else
+ instance->throttlequeuedepth =
+ MEGASAS_THROTTLE_QUEUE_DEPTH;
+
/*
* Setup tasklet for cmd completion
*/
@@ -4947,12 +5007,7 @@ static int megasas_io_attach(struct megasas_instance *instance)
*/
host->irq = instance->pdev->irq;
host->unique_id = instance->unique_id;
- if (instance->is_imr) {
- host->can_queue =
- instance->max_fw_cmds - MEGASAS_SKINNY_INT_CMDS;
- } else
- host->can_queue =
- instance->max_fw_cmds - MEGASAS_INT_CMDS;
+ host->can_queue = instance->max_scsi_cmds;
host->this_id = instance->init_id;
host->sg_tablesize = instance->max_num_sge;
@@ -5130,8 +5185,6 @@ static int megasas_probe_one(struct pci_dev *pdev,
((1 << PAGE_SHIFT) << instance->ctrl_context_pages));
INIT_LIST_HEAD(&fusion->cmd_pool);
spin_lock_init(&fusion->mpt_pool_lock);
- memset(fusion->load_balance_info, 0,
- sizeof(struct LD_LOAD_BALANCE_INFO) * MAX_LOGICAL_DRIVES_EXT);
}
break;
default: /* For all other supported controllers */
@@ -5215,12 +5268,10 @@ static int megasas_probe_one(struct pci_dev *pdev,
instance->init_id = MEGASAS_DEFAULT_INIT_ID;
instance->ctrl_info = NULL;
+
if ((instance->pdev->device == PCI_DEVICE_ID_LSI_SAS0073SKINNY) ||
- (instance->pdev->device == PCI_DEVICE_ID_LSI_SAS0071SKINNY)) {
+ (instance->pdev->device == PCI_DEVICE_ID_LSI_SAS0071SKINNY))
instance->flag_ieee = 1;
- sema_init(&instance->ioctl_sem, MEGASAS_SKINNY_INT_CMDS);
- } else
- sema_init(&instance->ioctl_sem, (MEGASAS_INT_CMDS - 5));
megasas_dbg_lvl = 0;
instance->flag = 0;
@@ -6215,9 +6266,6 @@ static int megasas_mgmt_ioctl_fw(struct file *file, unsigned long arg)
goto out_kfree_ioc;
}
- /*
- * We will allow only MEGASAS_INT_CMDS number of parallel ioctl cmds
- */
if (down_interruptible(&instance->ioctl_sem)) {
error = -ERESTARTSYS;
goto out_kfree_ioc;
diff --git a/drivers/scsi/megaraid/megaraid_sas_fp.c b/drivers/scsi/megaraid/megaraid_sas_fp.c
index 460c6a3d4ade..4f72287860ee 100644
--- a/drivers/scsi/megaraid/megaraid_sas_fp.c
+++ b/drivers/scsi/megaraid/megaraid_sas_fp.c
@@ -172,6 +172,7 @@ void MR_PopulateDrvRaidMap(struct megasas_instance *instance)
struct MR_FW_RAID_MAP_ALL *fw_map_old = NULL;
struct MR_FW_RAID_MAP *pFwRaidMap = NULL;
int i;
+ u16 ld_count;
struct MR_DRV_RAID_MAP_ALL *drv_map =
@@ -191,9 +192,10 @@ void MR_PopulateDrvRaidMap(struct megasas_instance *instance)
fw_map_old = (struct MR_FW_RAID_MAP_ALL *)
fusion->ld_map[(instance->map_id & 1)];
pFwRaidMap = &fw_map_old->raidMap;
+ ld_count = (u16)le32_to_cpu(pFwRaidMap->ldCount);
#if VD_EXT_DEBUG
- for (i = 0; i < le16_to_cpu(pFwRaidMap->ldCount); i++) {
+ for (i = 0; i < ld_count; i++) {
dev_dbg(&instance->pdev->dev, "(%d) :Index 0x%x "
"Target Id 0x%x Seq Num 0x%x Size 0/%llx\n",
instance->unique_id, i,
@@ -205,12 +207,15 @@ void MR_PopulateDrvRaidMap(struct megasas_instance *instance)
memset(drv_map, 0, fusion->drv_map_sz);
pDrvRaidMap->totalSize = pFwRaidMap->totalSize;
- pDrvRaidMap->ldCount = (__le16)pFwRaidMap->ldCount;
+ pDrvRaidMap->ldCount = (__le16)cpu_to_le16(ld_count);
pDrvRaidMap->fpPdIoTimeoutSec = pFwRaidMap->fpPdIoTimeoutSec;
for (i = 0; i < MAX_RAIDMAP_LOGICAL_DRIVES + MAX_RAIDMAP_VIEWS; i++)
pDrvRaidMap->ldTgtIdToLd[i] =
(u8)pFwRaidMap->ldTgtIdToLd[i];
- for (i = 0; i < le16_to_cpu(pDrvRaidMap->ldCount); i++) {
+ for (i = (MAX_RAIDMAP_LOGICAL_DRIVES + MAX_RAIDMAP_VIEWS);
+ i < MAX_LOGICAL_DRIVES_EXT; i++)
+ pDrvRaidMap->ldTgtIdToLd[i] = 0xff;
+ for (i = 0; i < ld_count; i++) {
pDrvRaidMap->ldSpanMap[i] = pFwRaidMap->ldSpanMap[i];
#if VD_EXT_DEBUG
dev_dbg(&instance->pdev->dev,
@@ -252,7 +257,7 @@ u8 MR_ValidateMapInfo(struct megasas_instance *instance)
struct LD_LOAD_BALANCE_INFO *lbInfo;
PLD_SPAN_INFO ldSpanInfo;
struct MR_LD_RAID *raid;
- int ldCount, num_lds;
+ u16 ldCount, num_lds;
u16 ld;
u32 expected_size;
@@ -356,7 +361,7 @@ static int getSpanInfo(struct MR_DRV_RAID_MAP_ALL *map,
for (ldCount = 0; ldCount < MAX_LOGICAL_DRIVES_EXT; ldCount++) {
ld = MR_TargetIdToLdGet(ldCount, map);
- if (ld >= MAX_LOGICAL_DRIVES_EXT)
+ if (ld >= (MAX_LOGICAL_DRIVES_EXT - 1))
continue;
raid = MR_LdRaidGet(ld, map);
dev_dbg(&instance->pdev->dev, "LD %x: span_depth=%x\n",
@@ -1157,7 +1162,7 @@ void mr_update_span_set(struct MR_DRV_RAID_MAP_ALL *map,
for (ldCount = 0; ldCount < MAX_LOGICAL_DRIVES_EXT; ldCount++) {
ld = MR_TargetIdToLdGet(ldCount, map);
- if (ld >= MAX_LOGICAL_DRIVES_EXT)
+ if (ld >= (MAX_LOGICAL_DRIVES_EXT - 1))
continue;
raid = MR_LdRaidGet(ld, map);
for (element = 0; element < MAX_QUAD_DEPTH; element++) {
diff --git a/drivers/scsi/megaraid/megaraid_sas_fusion.c b/drivers/scsi/megaraid/megaraid_sas_fusion.c
index 71557f64bb5e..675b5e7aba94 100644
--- a/drivers/scsi/megaraid/megaraid_sas_fusion.c
+++ b/drivers/scsi/megaraid/megaraid_sas_fusion.c
@@ -63,7 +63,6 @@ extern struct megasas_cmd *megasas_get_cmd(struct megasas_instance
extern void
megasas_complete_cmd(struct megasas_instance *instance,
struct megasas_cmd *cmd, u8 alt_status);
-int megasas_is_ldio(struct scsi_cmnd *cmd);
int
wait_and_poll(struct megasas_instance *instance, struct megasas_cmd *cmd,
int seconds);
@@ -103,6 +102,8 @@ megasas_enable_intr_fusion(struct megasas_instance *instance)
{
struct megasas_register_set __iomem *regs;
regs = instance->reg_set;
+
+ instance->mask_interrupts = 0;
/* For Thunderbolt/Invader also clear intr on enable */
writel(~0, &regs->outbound_intr_status);
readl(&regs->outbound_intr_status);
@@ -111,7 +112,6 @@ megasas_enable_intr_fusion(struct megasas_instance *instance)
/* Dummy readl to force pci flush */
readl(&regs->outbound_intr_mask);
- instance->mask_interrupts = 0;
}
/**
@@ -196,6 +196,7 @@ inline void megasas_return_cmd_fusion(struct megasas_instance *instance,
cmd->scmd = NULL;
cmd->sync_cmd_idx = (u32)ULONG_MAX;
+ memset(cmd->io_request, 0, sizeof(struct MPI2_RAID_SCSI_IO_REQUEST));
list_add(&cmd->list, (&fusion->cmd_pool)->next);
spin_unlock_irqrestore(&fusion->mpt_pool_lock, flags);
@@ -689,6 +690,8 @@ megasas_ioc_init_fusion(struct megasas_instance *instance)
= 1;
init_frame->driver_operations.mfi_capabilities.support_ndrive_r1_lb
= 1;
+ init_frame->driver_operations.mfi_capabilities.security_protocol_cmds_fw
+ = 1;
/* Convert capability to LE32 */
cpu_to_le32s((u32 *)&init_frame->driver_operations.mfi_capabilities);
@@ -698,12 +701,11 @@ megasas_ioc_init_fusion(struct megasas_instance *instance)
cpu_to_le32(lower_32_bits(ioc_init_handle));
init_frame->data_xfer_len = cpu_to_le32(sizeof(struct MPI2_IOC_INIT_REQUEST));
- req_desc.Words = 0;
+ req_desc.u.low = cpu_to_le32(lower_32_bits(cmd->frame_phys_addr));
+ req_desc.u.high = cpu_to_le32(upper_32_bits(cmd->frame_phys_addr));
req_desc.MFAIo.RequestFlags =
(MEGASAS_REQ_DESCRIPT_FLAGS_MFA <<
- MEGASAS_REQ_DESCRIPT_FLAGS_TYPE_SHIFT);
- cpu_to_le32s((u32 *)&req_desc.MFAIo);
- req_desc.Words |= cpu_to_le64(cmd->frame_phys_addr);
+ MEGASAS_REQ_DESCRIPT_FLAGS_TYPE_SHIFT);
/*
* disable the intr before firing the init frame
@@ -1017,8 +1019,12 @@ megasas_init_adapter_fusion(struct megasas_instance *instance)
* does not exceed max cmds that the FW can support
*/
instance->max_fw_cmds = instance->max_fw_cmds-1;
- /* Only internal cmds (DCMD) need to have MFI frames */
- instance->max_mfi_cmds = MEGASAS_INT_CMDS;
+
+ /*
+ * Only Driver's internal DCMDs and IOCTL DCMDs needs to have MFI frames
+ */
+ instance->max_mfi_cmds =
+ MEGASAS_FUSION_INTERNAL_CMDS + MEGASAS_FUSION_IOCTL_CMDS;
max_cmd = instance->max_fw_cmds;
@@ -1285,6 +1291,7 @@ megasas_make_sgl_fusion(struct megasas_instance *instance,
sgl_ptr =
(struct MPI25_IEEE_SGE_CHAIN64 *)cmd->sg_frame;
+ memset(sgl_ptr, 0, MEGASAS_MAX_SZ_CHAIN_FRAME);
}
}
@@ -1658,6 +1665,8 @@ megasas_build_dcdb_fusion(struct megasas_instance *instance,
u32 device_id;
struct MPI2_RAID_SCSI_IO_REQUEST *io_request;
u16 pd_index = 0;
+ u16 os_timeout_value;
+ u16 timeout_limit;
struct MR_DRV_RAID_MAP_ALL *local_map_ptr;
struct fusion_context *fusion = instance->ctrl_context;
u8 span, physArm;
@@ -1674,52 +1683,66 @@ megasas_build_dcdb_fusion(struct megasas_instance *instance,
io_request->DataLength = cpu_to_le32(scsi_bufflen(scmd));
-
- /* Check if this is a system PD I/O */
if (scmd->device->channel < MEGASAS_MAX_PD_CHANNELS &&
instance->pd_list[pd_index].driveState == MR_PD_STATE_SYSTEM) {
- io_request->Function = 0;
if (fusion->fast_path_io)
io_request->DevHandle =
local_map_ptr->raidMap.devHndlInfo[device_id].curDevHdl;
- io_request->RaidContext.timeoutValue =
- local_map_ptr->raidMap.fpPdIoTimeoutSec;
- io_request->RaidContext.regLockFlags = 0;
- io_request->RaidContext.regLockRowLBA = 0;
- io_request->RaidContext.regLockLength = 0;
io_request->RaidContext.RAIDFlags =
- MR_RAID_FLAGS_IO_SUB_TYPE_SYSTEM_PD <<
- MR_RAID_CTX_RAID_FLAGS_IO_SUB_TYPE_SHIFT;
- if ((instance->pdev->device == PCI_DEVICE_ID_LSI_INVADER) ||
- (instance->pdev->device == PCI_DEVICE_ID_LSI_FURY))
- io_request->IoFlags |= cpu_to_le16(
- MPI25_SAS_DEVICE0_FLAGS_ENABLED_FAST_PATH);
- cmd->request_desc->SCSIIO.RequestFlags =
- (MPI2_REQ_DESCRIPT_FLAGS_HIGH_PRIORITY <<
- MEGASAS_REQ_DESCRIPT_FLAGS_TYPE_SHIFT);
- cmd->request_desc->SCSIIO.DevHandle =
- local_map_ptr->raidMap.devHndlInfo[device_id].curDevHdl;
+ MR_RAID_FLAGS_IO_SUB_TYPE_SYSTEM_PD
+ << MR_RAID_CTX_RAID_FLAGS_IO_SUB_TYPE_SHIFT;
+ cmd->request_desc->SCSIIO.DevHandle = io_request->DevHandle;
cmd->request_desc->SCSIIO.MSIxIndex =
instance->msix_vectors ? smp_processor_id() % instance->msix_vectors : 0;
- /*
- * If the command is for the tape device, set the
- * FP timeout to the os layer timeout value.
- */
- if (scmd->device->type == TYPE_TAPE) {
- if ((scmd->request->timeout / HZ) > 0xFFFF)
- io_request->RaidContext.timeoutValue =
- 0xFFFF;
- else
- io_request->RaidContext.timeoutValue =
- scmd->request->timeout / HZ;
+ os_timeout_value = scmd->request->timeout / HZ;
+
+ if (instance->secure_jbod_support &&
+ (megasas_cmd_type(scmd) == NON_READ_WRITE_SYSPDIO)) {
+ /* system pd firmware path */
+ io_request->Function =
+ MEGASAS_MPI2_FUNCTION_LD_IO_REQUEST;
+ cmd->request_desc->SCSIIO.RequestFlags =
+ (MPI2_REQ_DESCRIPT_FLAGS_SCSI_IO <<
+ MEGASAS_REQ_DESCRIPT_FLAGS_TYPE_SHIFT);
+ io_request->RaidContext.timeoutValue =
+ cpu_to_le16(os_timeout_value);
+ } else {
+ /* system pd Fast Path */
+ io_request->Function = MPI2_FUNCTION_SCSI_IO_REQUEST;
+ io_request->RaidContext.regLockFlags = 0;
+ io_request->RaidContext.regLockRowLBA = 0;
+ io_request->RaidContext.regLockLength = 0;
+ timeout_limit = (scmd->device->type == TYPE_DISK) ?
+ 255 : 0xFFFF;
+ io_request->RaidContext.timeoutValue =
+ cpu_to_le16((os_timeout_value > timeout_limit) ?
+ timeout_limit : os_timeout_value);
+ if ((instance->pdev->device == PCI_DEVICE_ID_LSI_INVADER) ||
+ (instance->pdev->device == PCI_DEVICE_ID_LSI_FURY))
+ io_request->IoFlags |=
+ cpu_to_le16(MPI25_SAS_DEVICE0_FLAGS_ENABLED_FAST_PATH);
+
+ cmd->request_desc->SCSIIO.RequestFlags =
+ (MPI2_REQ_DESCRIPT_FLAGS_HIGH_PRIORITY <<
+ MEGASAS_REQ_DESCRIPT_FLAGS_TYPE_SHIFT);
}
} else {
if (scmd->device->channel < MEGASAS_MAX_PD_CHANNELS)
goto NonFastPath;
+ /*
+ * For older firmware, Driver should not access ldTgtIdToLd
+ * beyond index 127 and for Extended VD firmware, ldTgtIdToLd
+ * should not go beyond 255.
+ */
+
+ if ((!fusion->fast_path_io) ||
+ (device_id >= instance->fw_supported_vd_count))
+ goto NonFastPath;
+
ld = MR_TargetIdToLdGet(device_id, local_map_ptr);
- if ((ld >= instance->fw_supported_vd_count) ||
- (!fusion->fast_path_io))
+
+ if (ld >= instance->fw_supported_vd_count)
goto NonFastPath;
raid = MR_LdRaidGet(ld, local_map_ptr);
@@ -1811,7 +1834,7 @@ megasas_build_io_fusion(struct megasas_instance *instance,
*/
io_request->IoFlags = cpu_to_le16(scp->cmd_len);
- if (megasas_is_ldio(scp))
+ if (megasas_cmd_type(scp) == READ_WRITE_LDIO)
megasas_build_ldio_fusion(instance, scp, cmd);
else
megasas_build_dcdb_fusion(instance, scp, cmd);
@@ -2612,7 +2635,6 @@ int megasas_reset_fusion(struct Scsi_Host *shost, int iotimeout)
instance->host->host_no);
megaraid_sas_kill_hba(instance);
instance->skip_heartbeat_timer_del = 1;
- instance->adprecovery = MEGASAS_HW_CRITICAL_ERROR;
retval = FAILED;
goto out;
}
@@ -2808,8 +2830,6 @@ int megasas_reset_fusion(struct Scsi_Host *shost, int iotimeout)
dev_info(&instance->pdev->dev,
"Failed from %s %d\n",
__func__, __LINE__);
- instance->adprecovery =
- MEGASAS_HW_CRITICAL_ERROR;
megaraid_sas_kill_hba(instance);
retval = FAILED;
}
@@ -2858,7 +2878,6 @@ int megasas_reset_fusion(struct Scsi_Host *shost, int iotimeout)
"adapter scsi%d.\n", instance->host->host_no);
megaraid_sas_kill_hba(instance);
instance->skip_heartbeat_timer_del = 1;
- instance->adprecovery = MEGASAS_HW_CRITICAL_ERROR;
retval = FAILED;
} else {
/* For VF: Restart HB timer if we didn't OCR */
diff --git a/drivers/scsi/megaraid/megaraid_sas_fusion.h b/drivers/scsi/megaraid/megaraid_sas_fusion.h
index 5ab7daee11be..56e6db2d5874 100644
--- a/drivers/scsi/megaraid/megaraid_sas_fusion.h
+++ b/drivers/scsi/megaraid/megaraid_sas_fusion.h
@@ -306,14 +306,9 @@ struct MPI2_RAID_SCSI_IO_REQUEST {
* MPT RAID MFA IO Descriptor.
*/
struct MEGASAS_RAID_MFA_IO_REQUEST_DESCRIPTOR {
-#if defined(__BIG_ENDIAN_BITFIELD)
- u32 MessageAddress1:24; /* bits 31:8*/
- u32 RequestFlags:8;
-#else
u32 RequestFlags:8;
- u32 MessageAddress1:24; /* bits 31:8*/
-#endif
- u32 MessageAddress2; /* bits 61:32 */
+ u32 MessageAddress1:24;
+ u32 MessageAddress2;
};
/* Default Request Descriptor */
diff --git a/drivers/scsi/mpt2sas/mpi/mpi2.h b/drivers/scsi/mpt2sas/mpi/mpi2.h
index 088eefa67da8..7fc6f23bd9dc 100644
--- a/drivers/scsi/mpt2sas/mpi/mpi2.h
+++ b/drivers/scsi/mpt2sas/mpi/mpi2.h
@@ -8,7 +8,7 @@
* scatter/gather formats.
* Creation Date: June 21, 2006
*
- * mpi2.h Version: 02.00.32
+ * mpi2.h Version: 02.00.35
*
* Version History
* ---------------
@@ -83,6 +83,9 @@
* 04-09-13 02.00.30 Bumped MPI2_HEADER_VERSION_UNIT.
* 04-17-13 02.00.31 Bumped MPI2_HEADER_VERSION_UNIT.
* 08-19-13 02.00.32 Bumped MPI2_HEADER_VERSION_UNIT.
+ * 12-05-13 02.00.33 Bumped MPI2_HEADER_VERSION_UNIT.
+ * 01-08-14 02.00.34 Bumped MPI2_HEADER_VERSION_UNIT.
+ * 06-13-14 02.00.35 Bumped MPI2_HEADER_VERSION_UNIT.
* --------------------------------------------------------------------------
*/
@@ -108,7 +111,7 @@
#define MPI2_VERSION_02_00 (0x0200)
/* versioning for this MPI header set */
-#define MPI2_HEADER_VERSION_UNIT (0x20)
+#define MPI2_HEADER_VERSION_UNIT (0x23)
#define MPI2_HEADER_VERSION_DEV (0x00)
#define MPI2_HEADER_VERSION_UNIT_MASK (0xFF00)
#define MPI2_HEADER_VERSION_UNIT_SHIFT (8)
diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h b/drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h
index 510ef0dc8d7b..ee8d2d695d55 100644
--- a/drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h
+++ b/drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h
@@ -6,7 +6,7 @@
* Title: MPI Configuration messages and pages
* Creation Date: November 10, 2006
*
- * mpi2_cnfg.h Version: 02.00.26
+ * mpi2_cnfg.h Version: 02.00.29
*
* Version History
* ---------------
@@ -157,6 +157,20 @@
* 04-09-13 02.00.25 Added MPI2_IOUNITPAGE1_ATA_SECURITY_FREEZE_LOCK.
* Fixed MPI2_IOUNITPAGE5_DMA_CAP_MASK_MAX_REQUESTS to
* match the specification.
+ * 12-05-13 02.00.27 Added MPI2_MANPAGE7_FLAG_BASE_ENCLOSURE_LEVEL for
+ * MPI2_CONFIG_PAGE_MAN_7.
+ * Added EnclosureLevel and ConnectorName fields to
+ * MPI2_CONFIG_PAGE_SAS_DEV_0.
+ * Added MPI2_SAS_DEVICE0_FLAGS_ENCL_LEVEL_VALID for
+ * MPI2_CONFIG_PAGE_SAS_DEV_0.
+ * Added EnclosureLevel field to
+ * MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0.
+ * Added MPI2_SAS_ENCLS0_FLAGS_ENCL_LEVEL_VALID for
+ * MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0.
+ * 01-08-14 02.00.28 Added more defines for the BiosOptions field of
+ * MPI2_CONFIG_PAGE_BIOS_1.
+ * 06-13-14 02.00.29 Added SSUTimeout field to MPI2_CONFIG_PAGE_BIOS_1, and
+ * more defines for the BiosOptions field.
* --------------------------------------------------------------------------
*/
@@ -706,6 +720,7 @@ typedef struct _MPI2_CONFIG_PAGE_MAN_7
#define MPI2_MANUFACTURING7_PAGEVERSION (0x01)
/* defines for the Flags field */
+#define MPI2_MANPAGE7_FLAG_BASE_ENCLOSURE_LEVEL (0x00000008)
#define MPI2_MANPAGE7_FLAG_EVENTREPLAY_SLOT_ORDER (0x00000002)
#define MPI2_MANPAGE7_FLAG_USE_SLOT_INFO (0x00000001)
@@ -1224,7 +1239,9 @@ typedef struct _MPI2_CONFIG_PAGE_BIOS_1
MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */
U32 BiosOptions; /* 0x04 */
U32 IOCSettings; /* 0x08 */
- U32 Reserved1; /* 0x0C */
+ U8 SSUTimeout; /* 0x0C */
+ U8 Reserved1; /* 0x0D */
+ U16 Reserved2; /* 0x0E */
U32 DeviceSettings; /* 0x10 */
U16 NumberOfDevices; /* 0x14 */
U16 UEFIVersion; /* 0x16 */
@@ -1235,9 +1252,24 @@ typedef struct _MPI2_CONFIG_PAGE_BIOS_1
} MPI2_CONFIG_PAGE_BIOS_1, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_BIOS_1,
Mpi2BiosPage1_t, MPI2_POINTER pMpi2BiosPage1_t;
-#define MPI2_BIOSPAGE1_PAGEVERSION (0x05)
+#define MPI2_BIOSPAGE1_PAGEVERSION (0x07)
/* values for BIOS Page 1 BiosOptions field */
+#define MPI2_BIOSPAGE1_OPTIONS_PNS_MASK (0x00003800)
+#define MPI2_BIOSPAGE1_OPTIONS_PNS_PBDHL (0x00000000)
+#define MPI2_BIOSPAGE1_OPTIONS_PNS_ENCSLOSURE (0x00000800)
+#define MPI2_BIOSPAGE1_OPTIONS_PNS_LWWID (0x00001000)
+#define MPI2_BIOSPAGE1_OPTIONS_PNS_PSENS (0x00001800)
+#define MPI2_BIOSPAGE1_OPTIONS_PNS_ESPHY (0x00002000)
+
+#define MPI2_BIOSPAGE1_OPTIONS_X86_DISABLE_BIOS (0x00000400)
+
+#define MPI2_BIOSPAGE1_OPTIONS_MASK_REGISTRATION_UEFI_BSD (0x00000300)
+#define MPI2_BIOSPAGE1_OPTIONS_USE_BIT0_REGISTRATION_UEFI_BSD (0x00000000)
+#define MPI2_BIOSPAGE1_OPTIONS_FULL_REGISTRATION_UEFI_BSD (0x00000100)
+#define MPI2_BIOSPAGE1_OPTIONS_ADAPTER_REGISTRATION_UEFI_BSD (0x00000200)
+#define MPI2_BIOSPAGE1_OPTIONS_DISABLE_REGISTRATION_UEFI_BSD (0x00000300)
+
#define MPI2_BIOSPAGE1_OPTIONS_MASK_OEM_ID (0x000000F0)
#define MPI2_BIOSPAGE1_OPTIONS_LSI_OEM_ID (0x00000000)
@@ -2420,13 +2452,13 @@ typedef struct _MPI2_CONFIG_PAGE_SAS_DEV_0
U8 PortGroups; /* 0x2C */
U8 DmaGroup; /* 0x2D */
U8 ControlGroup; /* 0x2E */
- U8 Reserved1; /* 0x2F */
- U32 Reserved2; /* 0x30 */
+ U8 EnclosureLevel; /* 0x2F */
+ U8 ConnectorName[4]; /* 0x30 */
U32 Reserved3; /* 0x34 */
} MPI2_CONFIG_PAGE_SAS_DEV_0, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SAS_DEV_0,
Mpi2SasDevicePage0_t, MPI2_POINTER pMpi2SasDevicePage0_t;
-#define MPI2_SASDEVICE0_PAGEVERSION (0x08)
+#define MPI2_SASDEVICE0_PAGEVERSION (0x09)
/* values for SAS Device Page 0 AccessStatus field */
#define MPI2_SAS_DEVICE0_ASTATUS_NO_ERRORS (0x00)
@@ -2464,6 +2496,7 @@ typedef struct _MPI2_CONFIG_PAGE_SAS_DEV_0
#define MPI2_SAS_DEVICE0_FLAGS_SATA_NCQ_SUPPORTED (0x0020)
#define MPI2_SAS_DEVICE0_FLAGS_SATA_FUA_SUPPORTED (0x0010)
#define MPI2_SAS_DEVICE0_FLAGS_PORT_SELECTOR_ATTACH (0x0008)
+#define MPI2_SAS_DEVICE0_FLAGS_ENCL_LEVEL_VALID (0x0002)
#define MPI2_SAS_DEVICE0_FLAGS_DEVICE_PRESENT (0x0001)
@@ -2732,7 +2765,8 @@ typedef struct _MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0
U16 EnclosureHandle; /* 0x16 */
U16 NumSlots; /* 0x18 */
U16 StartSlot; /* 0x1A */
- U16 Reserved2; /* 0x1C */
+ U8 Reserved2; /* 0x1C */
+ U8 EnclosureLevel; /* 0x1D */
U16 SEPDevHandle; /* 0x1E */
U32 Reserved3; /* 0x20 */
U32 Reserved4; /* 0x24 */
@@ -2740,9 +2774,10 @@ typedef struct _MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0
MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0,
Mpi2SasEnclosurePage0_t, MPI2_POINTER pMpi2SasEnclosurePage0_t;
-#define MPI2_SASENCLOSURE0_PAGEVERSION (0x03)
+#define MPI2_SASENCLOSURE0_PAGEVERSION (0x04)
/* values for SAS Enclosure Page 0 Flags field */
+#define MPI2_SAS_ENCLS0_FLAGS_ENCL_LEVEL_VALID (0x0010)
#define MPI2_SAS_ENCLS0_FLAGS_MNG_MASK (0x000F)
#define MPI2_SAS_ENCLS0_FLAGS_MNG_UNKNOWN (0x0000)
#define MPI2_SAS_ENCLS0_FLAGS_MNG_IOC_SES (0x0001)
diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_ioc.h b/drivers/scsi/mpt2sas/mpi/mpi2_ioc.h
index 2c3b0f28576b..b02de48be204 100644
--- a/drivers/scsi/mpt2sas/mpi/mpi2_ioc.h
+++ b/drivers/scsi/mpt2sas/mpi/mpi2_ioc.h
@@ -6,7 +6,7 @@
* Title: MPI IOC, Port, Event, FW Download, and FW Upload messages
* Creation Date: October 11, 2006
*
- * mpi2_ioc.h Version: 02.00.23
+ * mpi2_ioc.h Version: 02.00.24
*
* Version History
* ---------------
@@ -126,6 +126,7 @@
* Added MPI2_IOCFACTS_CAPABILITY_RDPQ_ARRAY_CAPABLE.
* Added MPI2_FW_DOWNLOAD_ITYPE_PUBLIC_KEY.
* Added Encrypted Hash Extended Image.
+ * 12-05-13 02.00.24 Added MPI25_HASH_IMAGE_TYPE_BIOS.
* --------------------------------------------------------------------------
*/
@@ -1589,6 +1590,7 @@ Mpi25EncryptedHashEntry_t, MPI2_POINTER pMpi25EncryptedHashEntry_t;
/* values for HashImageType */
#define MPI25_HASH_IMAGE_TYPE_UNUSED (0x00)
#define MPI25_HASH_IMAGE_TYPE_FIRMWARE (0x01)
+#define MPI25_HASH_IMAGE_TYPE_BIOS (0x02)
/* values for HashAlgorithm */
#define MPI25_HASH_ALGORITHM_UNUSED (0x00)
diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_tool.h b/drivers/scsi/mpt2sas/mpi/mpi2_tool.h
index 9be03ed46180..659b8ac83ceb 100644
--- a/drivers/scsi/mpt2sas/mpi/mpi2_tool.h
+++ b/drivers/scsi/mpt2sas/mpi/mpi2_tool.h
@@ -6,7 +6,7 @@
* Title: MPI diagnostic tool structures and definitions
* Creation Date: March 26, 2007
*
- * mpi2_tool.h Version: 02.00.11
+ * mpi2_tool.h Version: 02.00.12
*
* Version History
* ---------------
@@ -29,7 +29,8 @@
* MPI2_TOOLBOX_ISTWI_READ_WRITE_REQUEST.
* 07-26-12 02.00.10 Modified MPI2_TOOLBOX_DIAGNOSTIC_CLI_REQUEST so that
* it uses MPI Chain SGE as well as MPI Simple SGE.
- * 08-19-13 02.00.11 Added MPI2_TOOLBOX_TEXT_DISPLAY_TOOL and related info.
+ * 08-19-13 02.00.11 Added MPI2_TOOLBOX_TEXT_DISPLAY_TOOL and related info.
+ * 01-08-14 02.00.12 Added MPI2_TOOLBOX_CLEAN_BIT26_PRODUCT_SPECIFIC.
* --------------------------------------------------------------------------
*/
@@ -101,6 +102,7 @@ typedef struct _MPI2_TOOLBOX_CLEAN_REQUEST
#define MPI2_TOOLBOX_CLEAN_OTHER_PERSIST_PAGES (0x20000000)
#define MPI2_TOOLBOX_CLEAN_FW_CURRENT (0x10000000)
#define MPI2_TOOLBOX_CLEAN_FW_BACKUP (0x08000000)
+#define MPI2_TOOLBOX_CLEAN_BIT26_PRODUCT_SPECIFIC (0x04000000)
#define MPI2_TOOLBOX_CLEAN_MEGARAID (0x02000000)
#define MPI2_TOOLBOX_CLEAN_INITIALIZATION (0x01000000)
#define MPI2_TOOLBOX_CLEAN_FLASH (0x00000004)
diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.c b/drivers/scsi/mpt2sas/mpt2sas_base.c
index 58e45216d1ec..11248de92b3b 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_base.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_base.c
@@ -4,7 +4,8 @@
*
* This code is based on drivers/scsi/mpt2sas/mpt2_base.c
* Copyright (C) 2007-2014 LSI Corporation
- * (mailto:DL-MPTFusionLinux@lsi.com)
+ * Copyright (C) 20013-2014 Avago Technologies
+ * (mailto: MPT-FusionLinux.pdl@avagotech.com)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
@@ -639,6 +640,9 @@ _base_display_event_data(struct MPT2SAS_ADAPTER *ioc,
if (!ioc->hide_ir_msg)
desc = "Log Entry Added";
break;
+ case MPI2_EVENT_TEMP_THRESHOLD:
+ desc = "Temperature Threshold";
+ break;
}
if (!desc)
@@ -1296,6 +1300,8 @@ _base_free_irq(struct MPT2SAS_ADAPTER *ioc)
list_for_each_entry_safe(reply_q, next, &ioc->reply_queue_list, list) {
list_del(&reply_q->list);
+ irq_set_affinity_hint(reply_q->vector, NULL);
+ free_cpumask_var(reply_q->affinity_hint);
synchronize_irq(reply_q->vector);
free_irq(reply_q->vector, reply_q);
kfree(reply_q);
@@ -1325,6 +1331,11 @@ _base_request_irq(struct MPT2SAS_ADAPTER *ioc, u8 index, u32 vector)
reply_q->ioc = ioc;
reply_q->msix_index = index;
reply_q->vector = vector;
+
+ if (!alloc_cpumask_var(&reply_q->affinity_hint, GFP_KERNEL))
+ return -ENOMEM;
+ cpumask_clear(reply_q->affinity_hint);
+
atomic_set(&reply_q->busy, 0);
if (ioc->msix_enable)
snprintf(reply_q->name, MPT_NAME_LENGTH, "%s%d-msix%d",
@@ -1359,6 +1370,7 @@ static void
_base_assign_reply_queues(struct MPT2SAS_ADAPTER *ioc)
{
unsigned int cpu, nr_cpus, nr_msix, index = 0;
+ struct adapter_reply_queue *reply_q;
if (!_base_is_controller_msix_enabled(ioc))
return;
@@ -1373,20 +1385,30 @@ _base_assign_reply_queues(struct MPT2SAS_ADAPTER *ioc)
cpu = cpumask_first(cpu_online_mask);
- do {
+ list_for_each_entry(reply_q, &ioc->reply_queue_list, list) {
+
unsigned int i, group = nr_cpus / nr_msix;
+ if (cpu >= nr_cpus)
+ break;
+
if (index < nr_cpus % nr_msix)
group++;
for (i = 0 ; i < group ; i++) {
ioc->cpu_msix_table[cpu] = index;
+ cpumask_or(reply_q->affinity_hint,
+ reply_q->affinity_hint, get_cpu_mask(cpu));
cpu = cpumask_next(cpu, cpu_online_mask);
}
+ if (irq_set_affinity_hint(reply_q->vector,
+ reply_q->affinity_hint))
+ dinitprintk(ioc, pr_info(MPT2SAS_FMT
+ "error setting affinity hint for irq vector %d\n",
+ ioc->name, reply_q->vector));
index++;
-
- } while (cpu < nr_cpus);
+ }
}
/**
@@ -2338,6 +2360,7 @@ _base_static_config_pages(struct MPT2SAS_ADAPTER *ioc)
mpt2sas_config_get_ioc_pg8(ioc, &mpi_reply, &ioc->ioc_pg8);
mpt2sas_config_get_iounit_pg0(ioc, &mpi_reply, &ioc->iounit_pg0);
mpt2sas_config_get_iounit_pg1(ioc, &mpi_reply, &ioc->iounit_pg1);
+ mpt2sas_config_get_iounit_pg8(ioc, &mpi_reply, &ioc->iounit_pg8);
_base_display_ioc_capabilities(ioc);
/*
@@ -2355,6 +2378,8 @@ _base_static_config_pages(struct MPT2SAS_ADAPTER *ioc)
ioc->iounit_pg1.Flags = cpu_to_le32(iounit_pg1_flags);
mpt2sas_config_set_iounit_pg1(ioc, &mpi_reply, &ioc->iounit_pg1);
+ if (ioc->iounit_pg8.NumSensors)
+ ioc->temp_sensors_count = ioc->iounit_pg8.NumSensors;
}
/**
@@ -2486,9 +2511,13 @@ _base_allocate_memory_pools(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
/* command line tunables for max sgl entries */
if (max_sgl_entries != -1) {
- ioc->shost->sg_tablesize = (max_sgl_entries <
- MPT2SAS_SG_DEPTH) ? max_sgl_entries :
- MPT2SAS_SG_DEPTH;
+ ioc->shost->sg_tablesize = min_t(unsigned short,
+ max_sgl_entries, SCSI_MAX_SG_CHAIN_SEGMENTS);
+ if (ioc->shost->sg_tablesize > MPT2SAS_SG_DEPTH)
+ printk(MPT2SAS_WARN_FMT
+ "sg_tablesize(%u) is bigger than kernel defined"
+ " SCSI_MAX_SG_SEGMENTS(%u)\n", ioc->name,
+ ioc->shost->sg_tablesize, MPT2SAS_SG_DEPTH);
} else {
ioc->shost->sg_tablesize = MPT2SAS_SG_DEPTH;
}
@@ -3236,7 +3265,7 @@ mpt2sas_base_sas_iounit_control(struct MPT2SAS_ADAPTER *ioc,
u16 smid;
u32 ioc_state;
unsigned long timeleft;
- u8 issue_reset;
+ bool issue_reset = false;
int rc;
void *request;
u16 wait_state_count;
@@ -3300,7 +3329,7 @@ mpt2sas_base_sas_iounit_control(struct MPT2SAS_ADAPTER *ioc,
_debug_dump_mf(mpi_request,
sizeof(Mpi2SasIoUnitControlRequest_t)/4);
if (!(ioc->base_cmds.status & MPT2_CMD_RESET))
- issue_reset = 1;
+ issue_reset = true;
goto issue_host_reset;
}
if (ioc->base_cmds.status & MPT2_CMD_REPLY_VALID)
@@ -3341,7 +3370,7 @@ mpt2sas_base_scsi_enclosure_processor(struct MPT2SAS_ADAPTER *ioc,
u16 smid;
u32 ioc_state;
unsigned long timeleft;
- u8 issue_reset;
+ bool issue_reset = false;
int rc;
void *request;
u16 wait_state_count;
@@ -3398,7 +3427,7 @@ mpt2sas_base_scsi_enclosure_processor(struct MPT2SAS_ADAPTER *ioc,
_debug_dump_mf(mpi_request,
sizeof(Mpi2SepRequest_t)/4);
if (!(ioc->base_cmds.status & MPT2_CMD_RESET))
- issue_reset = 1;
+ issue_reset = true;
goto issue_host_reset;
}
if (ioc->base_cmds.status & MPT2_CMD_REPLY_VALID)
@@ -4594,6 +4623,7 @@ mpt2sas_base_attach(struct MPT2SAS_ADAPTER *ioc)
_base_unmask_events(ioc, MPI2_EVENT_IR_PHYSICAL_DISK);
_base_unmask_events(ioc, MPI2_EVENT_IR_OPERATION_STATUS);
_base_unmask_events(ioc, MPI2_EVENT_LOG_ENTRY_ADDED);
+ _base_unmask_events(ioc, MPI2_EVENT_TEMP_THRESHOLD);
r = _base_make_ioc_operational(ioc, CAN_SLEEP);
if (r)
goto out_free_resources;
diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.h b/drivers/scsi/mpt2sas/mpt2sas_base.h
index 239f169b0673..caff8d10cca4 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_base.h
+++ b/drivers/scsi/mpt2sas/mpt2sas_base.h
@@ -4,7 +4,8 @@
*
* This code is based on drivers/scsi/mpt2sas/mpt2_base.h
* Copyright (C) 2007-2014 LSI Corporation
- * (mailto:DL-MPTFusionLinux@lsi.com)
+ * Copyright (C) 20013-2014 Avago Technologies
+ * (mailto: MPT-FusionLinux.pdl@avagotech.com)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
@@ -67,10 +68,10 @@
/* driver versioning info */
#define MPT2SAS_DRIVER_NAME "mpt2sas"
-#define MPT2SAS_AUTHOR "LSI Corporation <DL-MPTFusionLinux@lsi.com>"
+#define MPT2SAS_AUTHOR "Avago Technologies <MPT-FusionLinux.pdl@avagotech.com>"
#define MPT2SAS_DESCRIPTION "LSI MPT Fusion SAS 2.0 Device Driver"
-#define MPT2SAS_DRIVER_VERSION "18.100.00.00"
-#define MPT2SAS_MAJOR_VERSION 18
+#define MPT2SAS_DRIVER_VERSION "20.100.00.00"
+#define MPT2SAS_MAJOR_VERSION 20
#define MPT2SAS_MINOR_VERSION 100
#define MPT2SAS_BUILD_VERSION 00
#define MPT2SAS_RELEASE_VERSION 00
@@ -586,6 +587,7 @@ struct adapter_reply_queue {
Mpi2ReplyDescriptorsUnion_t *reply_post_free;
char name[MPT_NAME_LENGTH];
atomic_t busy;
+ cpumask_var_t affinity_hint;
struct list_head list;
};
@@ -725,6 +727,7 @@ typedef void (*MPT2SAS_FLUSH_RUNNING_CMDS)(struct MPT2SAS_ADAPTER *ioc);
* @ioc_pg8: static ioc page 8
* @iounit_pg0: static iounit page 0
* @iounit_pg1: static iounit page 1
+ * @iounit_pg8: static iounit page 8
* @sas_hba: sas host object
* @sas_expander_list: expander object list
* @sas_node_lock:
@@ -795,6 +798,7 @@ typedef void (*MPT2SAS_FLUSH_RUNNING_CMDS)(struct MPT2SAS_ADAPTER *ioc);
* @reply_post_host_index: head index in the pool where FW completes IO
* @delayed_tr_list: target reset link list
* @delayed_tr_volume_list: volume target reset link list
+ * @@temp_sensors_count: flag to carry the number of temperature sensors
*/
struct MPT2SAS_ADAPTER {
struct list_head list;
@@ -892,6 +896,7 @@ struct MPT2SAS_ADAPTER {
Mpi2IOCPage8_t ioc_pg8;
Mpi2IOUnitPage0_t iounit_pg0;
Mpi2IOUnitPage1_t iounit_pg1;
+ Mpi2IOUnitPage8_t iounit_pg8;
struct _boot_device req_boot_device;
struct _boot_device req_alt_boot_device;
@@ -992,6 +997,7 @@ struct MPT2SAS_ADAPTER {
struct list_head delayed_tr_list;
struct list_head delayed_tr_volume_list;
+ u8 temp_sensors_count;
/* diag buffer support */
u8 *diag_buffer[MPI2_DIAG_BUF_TYPE_COUNT];
@@ -1120,6 +1126,8 @@ int mpt2sas_config_get_iounit_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
*mpi_reply, Mpi2IOUnitPage1_t *config_page);
int mpt2sas_config_set_iounit_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
*mpi_reply, Mpi2IOUnitPage1_t *config_page);
+int mpt2sas_config_get_iounit_pg8(struct MPT2SAS_ADAPTER *ioc,
+ Mpi2ConfigReply_t *mpi_reply, Mpi2IOUnitPage8_t *config_page);
int mpt2sas_config_get_iounit_pg3(struct MPT2SAS_ADAPTER *ioc,
Mpi2ConfigReply_t *mpi_reply, Mpi2IOUnitPage3_t *config_page, u16 sz);
int mpt2sas_config_get_sas_iounit_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
diff --git a/drivers/scsi/mpt2sas/mpt2sas_config.c b/drivers/scsi/mpt2sas/mpt2sas_config.c
index c72a2fff5dbb..c43815b1a485 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_config.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_config.c
@@ -3,7 +3,8 @@
*
* This code is based on drivers/scsi/mpt2sas/mpt2_base.c
* Copyright (C) 2007-2014 LSI Corporation
- * (mailto:DL-MPTFusionLinux@lsi.com)
+ * Copyright (C) 20013-2014 Avago Technologies
+ * (mailto: MPT-FusionLinux.pdl@avagotech.com)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
@@ -719,6 +720,42 @@ mpt2sas_config_get_iounit_pg3(struct MPT2SAS_ADAPTER *ioc,
}
/**
+ * mpt2sas_config_get_iounit_pg8 - obtain iounit page 8
+ * @ioc: per adapter object
+ * @mpi_reply: reply mf payload returned from firmware
+ * @config_page: contents of the config page
+ * Context: sleep.
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+int
+mpt2sas_config_get_iounit_pg8(struct MPT2SAS_ADAPTER *ioc,
+ Mpi2ConfigReply_t *mpi_reply, Mpi2IOUnitPage8_t *config_page)
+{
+ Mpi2ConfigRequest_t mpi_request;
+ int r;
+
+ memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
+ mpi_request.Function = MPI2_FUNCTION_CONFIG;
+ mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
+ mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_IO_UNIT;
+ mpi_request.Header.PageNumber = 8;
+ mpi_request.Header.PageVersion = MPI2_IOUNITPAGE8_PAGEVERSION;
+ mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE);
+ r = _config_request(ioc, &mpi_request, mpi_reply,
+ MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
+ if (r)
+ goto out;
+
+ mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
+ r = _config_request(ioc, &mpi_request, mpi_reply,
+ MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
+ sizeof(*config_page));
+ out:
+ return r;
+}
+
+/**
* mpt2sas_config_get_ioc_pg8 - obtain ioc page 8
* @ioc: per adapter object
* @mpi_reply: reply mf payload returned from firmware
diff --git a/drivers/scsi/mpt2sas/mpt2sas_ctl.c b/drivers/scsi/mpt2sas/mpt2sas_ctl.c
index ca4e563c01dd..4e509604b571 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_ctl.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_ctl.c
@@ -4,7 +4,8 @@
*
* This code is based on drivers/scsi/mpt2sas/mpt2_ctl.c
* Copyright (C) 2007-2014 LSI Corporation
- * (mailto:DL-MPTFusionLinux@lsi.com)
+ * Copyright (C) 20013-2014 Avago Technologies
+ * (mailto: MPT-FusionLinux.pdl@avagotech.com)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
diff --git a/drivers/scsi/mpt2sas/mpt2sas_ctl.h b/drivers/scsi/mpt2sas/mpt2sas_ctl.h
index 7f842c88abd2..46b2fc5b74af 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_ctl.h
+++ b/drivers/scsi/mpt2sas/mpt2sas_ctl.h
@@ -4,7 +4,8 @@
*
* This code is based on drivers/scsi/mpt2sas/mpt2_ctl.h
* Copyright (C) 2007-2014 LSI Corporation
- * (mailto:DL-MPTFusionLinux@lsi.com)
+ * Copyright (C) 20013-2014 Avago Technologies
+ * (mailto: MPT-FusionLinux.pdl@avagotech.com)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
diff --git a/drivers/scsi/mpt2sas/mpt2sas_debug.h b/drivers/scsi/mpt2sas/mpt2sas_debug.h
index cc57ef31d0fe..277120d45648 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_debug.h
+++ b/drivers/scsi/mpt2sas/mpt2sas_debug.h
@@ -3,7 +3,8 @@
*
* This code is based on drivers/scsi/mpt2sas/mpt2_debug.c
* Copyright (C) 2007-2014 LSI Corporation
- * (mailto:DL-MPTFusionLinux@lsi.com)
+ * Copyright (C) 20013-2014 Avago Technologies
+ * (mailto: MPT-FusionLinux.pdl@avagotech.com)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
index 6a1c036a6f3f..3f26147bbc64 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
@@ -3,7 +3,8 @@
*
* This code is based on drivers/scsi/mpt2sas/mpt2_scsih.c
* Copyright (C) 2007-2014 LSI Corporation
- * (mailto:DL-MPTFusionLinux@lsi.com)
+ * Copyright (C) 20013-2014 Avago Technologies
+ * (mailto: MPT-FusionLinux.pdl@avagotech.com)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
@@ -2729,9 +2730,18 @@ _scsih_host_reset(struct scsi_cmnd *scmd)
ioc->name, scmd);
scsi_print_command(scmd);
+ if (ioc->is_driver_loading) {
+ printk(MPT2SAS_INFO_FMT "Blocking the host reset\n",
+ ioc->name);
+ r = FAILED;
+ goto out;
+ }
+
retval = mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP,
FORCE_BIG_HAMMER);
r = (retval < 0) ? FAILED : SUCCESS;
+
+ out:
printk(MPT2SAS_INFO_FMT "host reset: %s scmd(%p)\n",
ioc->name, ((r == SUCCESS) ? "SUCCESS" : "FAILED"), scmd);
@@ -3647,6 +3657,31 @@ _scsih_check_volume_delete_events(struct MPT2SAS_ADAPTER *ioc,
}
/**
+ * _scsih_temp_threshold_events - display temperature threshold exceeded events
+ * @ioc: per adapter object
+ * @event_data: the temp threshold event data
+ * Context: interrupt time.
+ *
+ * Return nothing.
+ */
+static void
+_scsih_temp_threshold_events(struct MPT2SAS_ADAPTER *ioc,
+ Mpi2EventDataTemperature_t *event_data)
+{
+ if (ioc->temp_sensors_count >= event_data->SensorNum) {
+ printk(MPT2SAS_ERR_FMT "Temperature Threshold flags %s%s%s%s"
+ " exceeded for Sensor: %d !!!\n", ioc->name,
+ ((le16_to_cpu(event_data->Status) & 0x1) == 1) ? "0 " : " ",
+ ((le16_to_cpu(event_data->Status) & 0x2) == 2) ? "1 " : " ",
+ ((le16_to_cpu(event_data->Status) & 0x4) == 4) ? "2 " : " ",
+ ((le16_to_cpu(event_data->Status) & 0x8) == 8) ? "3 " : " ",
+ event_data->SensorNum);
+ printk(MPT2SAS_ERR_FMT "Current Temp In Celsius: %d\n",
+ ioc->name, event_data->CurrentTemperature);
+ }
+}
+
+/**
* _scsih_flush_running_cmds - completing outstanding commands.
* @ioc: per adapter object
*
@@ -4509,6 +4544,10 @@ _scsih_io_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply)
scmd->result = DID_TRANSPORT_DISRUPTED << 16;
goto out;
}
+ if (log_info == 0x32010081) {
+ scmd->result = DID_RESET << 16;
+ break;
+ }
scmd->result = DID_SOFT_ERROR << 16;
break;
case MPI2_IOCSTATUS_SCSI_TASK_TERMINATED:
@@ -7557,6 +7596,12 @@ mpt2sas_scsih_event_callback(struct MPT2SAS_ADAPTER *ioc, u8 msix_index,
case MPI2_EVENT_IR_PHYSICAL_DISK:
break;
+ case MPI2_EVENT_TEMP_THRESHOLD:
+ _scsih_temp_threshold_events(ioc,
+ (Mpi2EventDataTemperature_t *)
+ mpi_reply->EventData);
+ break;
+
default: /* ignore the rest */
return;
}
diff --git a/drivers/scsi/mpt2sas/mpt2sas_transport.c b/drivers/scsi/mpt2sas/mpt2sas_transport.c
index e689bf20a3ea..ff2500ab9ba4 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_transport.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_transport.c
@@ -3,7 +3,8 @@
*
* This code is based on drivers/scsi/mpt2sas/mpt2_transport.c
* Copyright (C) 2007-2014 LSI Corporation
- * (mailto:DL-MPTFusionLinux@lsi.com)
+ * Copyright (C) 20013-2014 Avago Technologies
+ * (mailto: MPT-FusionLinux.pdl@avagotech.com)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c
index 1560115079c7..14a781b6b88d 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_base.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.c
@@ -4,7 +4,8 @@
*
* This code is based on drivers/scsi/mpt3sas/mpt3sas_base.c
* Copyright (C) 2012-2014 LSI Corporation
- * (mailto:DL-MPTFusionLinux@lsi.com)
+ * Copyright (C) 2013-2014 Avago Technologies
+ * (mailto: MPT-FusionLinux.pdl@avagotech.com)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
@@ -619,6 +620,9 @@ _base_display_event_data(struct MPT3SAS_ADAPTER *ioc,
case MPI2_EVENT_LOG_ENTRY_ADDED:
desc = "Log Entry Added";
break;
+ case MPI2_EVENT_TEMP_THRESHOLD:
+ desc = "Temperature Threshold";
+ break;
}
if (!desc)
@@ -1580,6 +1584,8 @@ _base_free_irq(struct MPT3SAS_ADAPTER *ioc)
list_for_each_entry_safe(reply_q, next, &ioc->reply_queue_list, list) {
list_del(&reply_q->list);
+ irq_set_affinity_hint(reply_q->vector, NULL);
+ free_cpumask_var(reply_q->affinity_hint);
synchronize_irq(reply_q->vector);
free_irq(reply_q->vector, reply_q);
kfree(reply_q);
@@ -1609,6 +1615,11 @@ _base_request_irq(struct MPT3SAS_ADAPTER *ioc, u8 index, u32 vector)
reply_q->ioc = ioc;
reply_q->msix_index = index;
reply_q->vector = vector;
+
+ if (!alloc_cpumask_var(&reply_q->affinity_hint, GFP_KERNEL))
+ return -ENOMEM;
+ cpumask_clear(reply_q->affinity_hint);
+
atomic_set(&reply_q->busy, 0);
if (ioc->msix_enable)
snprintf(reply_q->name, MPT_NAME_LENGTH, "%s%d-msix%d",
@@ -1643,6 +1654,7 @@ static void
_base_assign_reply_queues(struct MPT3SAS_ADAPTER *ioc)
{
unsigned int cpu, nr_cpus, nr_msix, index = 0;
+ struct adapter_reply_queue *reply_q;
if (!_base_is_controller_msix_enabled(ioc))
return;
@@ -1657,20 +1669,30 @@ _base_assign_reply_queues(struct MPT3SAS_ADAPTER *ioc)
cpu = cpumask_first(cpu_online_mask);
- do {
+ list_for_each_entry(reply_q, &ioc->reply_queue_list, list) {
+
unsigned int i, group = nr_cpus / nr_msix;
+ if (cpu >= nr_cpus)
+ break;
+
if (index < nr_cpus % nr_msix)
group++;
for (i = 0 ; i < group ; i++) {
ioc->cpu_msix_table[cpu] = index;
+ cpumask_or(reply_q->affinity_hint,
+ reply_q->affinity_hint, get_cpu_mask(cpu));
cpu = cpumask_next(cpu, cpu_online_mask);
}
+ if (irq_set_affinity_hint(reply_q->vector,
+ reply_q->affinity_hint))
+ dinitprintk(ioc, pr_info(MPT3SAS_FMT
+ "error setting affinity hint for irq vector %d\n",
+ ioc->name, reply_q->vector));
index++;
-
- } while (cpu < nr_cpus);
+ }
}
/**
@@ -2500,6 +2522,7 @@ _base_static_config_pages(struct MPT3SAS_ADAPTER *ioc)
mpt3sas_config_get_ioc_pg8(ioc, &mpi_reply, &ioc->ioc_pg8);
mpt3sas_config_get_iounit_pg0(ioc, &mpi_reply, &ioc->iounit_pg0);
mpt3sas_config_get_iounit_pg1(ioc, &mpi_reply, &ioc->iounit_pg1);
+ mpt3sas_config_get_iounit_pg8(ioc, &mpi_reply, &ioc->iounit_pg8);
_base_display_ioc_capabilities(ioc);
/*
@@ -2516,6 +2539,9 @@ _base_static_config_pages(struct MPT3SAS_ADAPTER *ioc)
MPI2_IOUNITPAGE1_DISABLE_TASK_SET_FULL_HANDLING;
ioc->iounit_pg1.Flags = cpu_to_le32(iounit_pg1_flags);
mpt3sas_config_set_iounit_pg1(ioc, &mpi_reply, &ioc->iounit_pg1);
+
+ if (ioc->iounit_pg8.NumSensors)
+ ioc->temp_sensors_count = ioc->iounit_pg8.NumSensors;
}
/**
@@ -2659,8 +2685,14 @@ _base_allocate_memory_pools(struct MPT3SAS_ADAPTER *ioc, int sleep_flag)
if (sg_tablesize < MPT3SAS_MIN_PHYS_SEGMENTS)
sg_tablesize = MPT3SAS_MIN_PHYS_SEGMENTS;
- else if (sg_tablesize > MPT3SAS_MAX_PHYS_SEGMENTS)
- sg_tablesize = MPT3SAS_MAX_PHYS_SEGMENTS;
+ else if (sg_tablesize > MPT3SAS_MAX_PHYS_SEGMENTS) {
+ sg_tablesize = min_t(unsigned short, sg_tablesize,
+ SCSI_MAX_SG_CHAIN_SEGMENTS);
+ pr_warn(MPT3SAS_FMT
+ "sg_tablesize(%u) is bigger than kernel"
+ " defined SCSI_MAX_SG_SEGMENTS(%u)\n", ioc->name,
+ sg_tablesize, MPT3SAS_MAX_PHYS_SEGMENTS);
+ }
ioc->shost->sg_tablesize = sg_tablesize;
ioc->hi_priority_depth = facts->HighPriorityCredit;
@@ -3419,7 +3451,7 @@ mpt3sas_base_sas_iounit_control(struct MPT3SAS_ADAPTER *ioc,
u16 smid;
u32 ioc_state;
unsigned long timeleft;
- u8 issue_reset;
+ bool issue_reset = false;
int rc;
void *request;
u16 wait_state_count;
@@ -3483,7 +3515,7 @@ mpt3sas_base_sas_iounit_control(struct MPT3SAS_ADAPTER *ioc,
_debug_dump_mf(mpi_request,
sizeof(Mpi2SasIoUnitControlRequest_t)/4);
if (!(ioc->base_cmds.status & MPT3_CMD_RESET))
- issue_reset = 1;
+ issue_reset = true;
goto issue_host_reset;
}
if (ioc->base_cmds.status & MPT3_CMD_REPLY_VALID)
@@ -3523,7 +3555,7 @@ mpt3sas_base_scsi_enclosure_processor(struct MPT3SAS_ADAPTER *ioc,
u16 smid;
u32 ioc_state;
unsigned long timeleft;
- u8 issue_reset;
+ bool issue_reset = false;
int rc;
void *request;
u16 wait_state_count;
@@ -3581,7 +3613,7 @@ mpt3sas_base_scsi_enclosure_processor(struct MPT3SAS_ADAPTER *ioc,
_debug_dump_mf(mpi_request,
sizeof(Mpi2SepRequest_t)/4);
if (!(ioc->base_cmds.status & MPT3_CMD_RESET))
- issue_reset = 1;
+ issue_reset = false;
goto issue_host_reset;
}
if (ioc->base_cmds.status & MPT3_CMD_REPLY_VALID)
@@ -4720,6 +4752,7 @@ mpt3sas_base_attach(struct MPT3SAS_ADAPTER *ioc)
_base_unmask_events(ioc, MPI2_EVENT_IR_PHYSICAL_DISK);
_base_unmask_events(ioc, MPI2_EVENT_IR_OPERATION_STATUS);
_base_unmask_events(ioc, MPI2_EVENT_LOG_ENTRY_ADDED);
+ _base_unmask_events(ioc, MPI2_EVENT_TEMP_THRESHOLD);
r = _base_make_ioc_operational(ioc, CAN_SLEEP);
if (r)
diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h b/drivers/scsi/mpt3sas/mpt3sas_base.h
index 40926aa9b24d..afa881682bef 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_base.h
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.h
@@ -4,7 +4,8 @@
*
* This code is based on drivers/scsi/mpt3sas/mpt3sas_base.h
* Copyright (C) 2012-2014 LSI Corporation
- * (mailto:DL-MPTFusionLinux@lsi.com)
+ * Copyright (C) 2013-2014 Avago Technologies
+ * (mailto: MPT-FusionLinux.pdl@avagotech.com)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
@@ -68,7 +69,7 @@
/* driver versioning info */
#define MPT3SAS_DRIVER_NAME "mpt3sas"
-#define MPT3SAS_AUTHOR "LSI Corporation <DL-MPTFusionLinux@lsi.com>"
+#define MPT3SAS_AUTHOR "Avago Technologies <MPT-FusionLinux.pdl@avagotech.com>"
#define MPT3SAS_DESCRIPTION "LSI MPT Fusion SAS 3.0 Device Driver"
#define MPT3SAS_DRIVER_VERSION "04.100.00.00"
#define MPT3SAS_MAJOR_VERSION 4
@@ -506,6 +507,7 @@ struct adapter_reply_queue {
Mpi2ReplyDescriptorsUnion_t *reply_post_free;
char name[MPT_NAME_LENGTH];
atomic_t busy;
+ cpumask_var_t affinity_hint;
struct list_head list;
};
@@ -659,6 +661,7 @@ typedef void (*MPT3SAS_FLUSH_RUNNING_CMDS)(struct MPT3SAS_ADAPTER *ioc);
* @ioc_pg8: static ioc page 8
* @iounit_pg0: static iounit page 0
* @iounit_pg1: static iounit page 1
+ * @iounit_pg8: static iounit page 8
* @sas_hba: sas host object
* @sas_expander_list: expander object list
* @sas_node_lock:
@@ -728,6 +731,7 @@ typedef void (*MPT3SAS_FLUSH_RUNNING_CMDS)(struct MPT3SAS_ADAPTER *ioc);
* @reply_post_host_index: head index in the pool where FW completes IO
* @delayed_tr_list: target reset link list
* @delayed_tr_volume_list: volume target reset link list
+ * @@temp_sensors_count: flag to carry the number of temperature sensors
*/
struct MPT3SAS_ADAPTER {
struct list_head list;
@@ -834,6 +838,7 @@ struct MPT3SAS_ADAPTER {
Mpi2IOCPage8_t ioc_pg8;
Mpi2IOUnitPage0_t iounit_pg0;
Mpi2IOUnitPage1_t iounit_pg1;
+ Mpi2IOUnitPage8_t iounit_pg8;
struct _boot_device req_boot_device;
struct _boot_device req_alt_boot_device;
@@ -934,6 +939,7 @@ struct MPT3SAS_ADAPTER {
struct list_head delayed_tr_list;
struct list_head delayed_tr_volume_list;
+ u8 temp_sensors_count;
/* diag buffer support */
u8 *diag_buffer[MPI2_DIAG_BUF_TYPE_COUNT];
@@ -1082,6 +1088,8 @@ int mpt3sas_config_get_iounit_pg1(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t
*mpi_reply, Mpi2IOUnitPage1_t *config_page);
int mpt3sas_config_set_iounit_pg1(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t
*mpi_reply, Mpi2IOUnitPage1_t *config_page);
+int mpt3sas_config_get_iounit_pg8(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t
+ *mpi_reply, Mpi2IOUnitPage8_t *config_page);
int mpt3sas_config_get_sas_iounit_pg1(struct MPT3SAS_ADAPTER *ioc,
Mpi2ConfigReply_t *mpi_reply, Mpi2SasIOUnitPage1_t *config_page,
u16 sz);
diff --git a/drivers/scsi/mpt3sas/mpt3sas_config.c b/drivers/scsi/mpt3sas/mpt3sas_config.c
index 4472c2af9255..e45c4613ef0c 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_config.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_config.c
@@ -3,7 +3,8 @@
*
* This code is based on drivers/scsi/mpt3sas/mpt3sas_base.c
* Copyright (C) 2012-2014 LSI Corporation
- * (mailto:DL-MPTFusionLinux@lsi.com)
+ * Copyright (C) 2013-2014 Avago Technologies
+ * (mailto: MPT-FusionLinux.pdl@avagotech.com)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
@@ -871,6 +872,42 @@ mpt3sas_config_set_iounit_pg1(struct MPT3SAS_ADAPTER *ioc,
}
/**
+ * mpt3sas_config_get_iounit_pg8 - obtain iounit page 8
+ * @ioc: per adapter object
+ * @mpi_reply: reply mf payload returned from firmware
+ * @config_page: contents of the config page
+ * Context: sleep.
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_config_get_iounit_pg8(struct MPT3SAS_ADAPTER *ioc,
+ Mpi2ConfigReply_t *mpi_reply, Mpi2IOUnitPage8_t *config_page)
+{
+ Mpi2ConfigRequest_t mpi_request;
+ int r;
+
+ memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
+ mpi_request.Function = MPI2_FUNCTION_CONFIG;
+ mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
+ mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_IO_UNIT;
+ mpi_request.Header.PageNumber = 8;
+ mpi_request.Header.PageVersion = MPI2_IOUNITPAGE8_PAGEVERSION;
+ ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
+ r = _config_request(ioc, &mpi_request, mpi_reply,
+ MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
+ if (r)
+ goto out;
+
+ mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
+ r = _config_request(ioc, &mpi_request, mpi_reply,
+ MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
+ sizeof(*config_page));
+ out:
+ return r;
+}
+
+/**
* mpt3sas_config_get_ioc_pg8 - obtain ioc page 8
* @ioc: per adapter object
* @mpi_reply: reply mf payload returned from firmware
diff --git a/drivers/scsi/mpt3sas/mpt3sas_ctl.c b/drivers/scsi/mpt3sas/mpt3sas_ctl.c
index dca14877d5ab..080c8a76d23d 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_ctl.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_ctl.c
@@ -4,7 +4,8 @@
*
* This code is based on drivers/scsi/mpt3sas/mpt3sas_ctl.c
* Copyright (C) 2012-2014 LSI Corporation
- * (mailto:DL-MPTFusionLinux@lsi.com)
+ * Copyright (C) 2013-2014 Avago Technologies
+ * (mailto: MPT-FusionLinux.pdl@avagotech.com)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
diff --git a/drivers/scsi/mpt3sas/mpt3sas_ctl.h b/drivers/scsi/mpt3sas/mpt3sas_ctl.h
index 5f3d7fd7c2f8..aee99ce67e54 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_ctl.h
+++ b/drivers/scsi/mpt3sas/mpt3sas_ctl.h
@@ -4,7 +4,8 @@
*
* This code is based on drivers/scsi/mpt3sas/mpt3sas_ctl.h
* Copyright (C) 2012-2014 LSI Corporation
- * (mailto:DL-MPTFusionLinux@lsi.com)
+ * Copyright (C) 2013-2014 Avago Technologies
+ * (mailto: MPT-FusionLinux.pdl@avagotech.com)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
diff --git a/drivers/scsi/mpt3sas/mpt3sas_debug.h b/drivers/scsi/mpt3sas/mpt3sas_debug.h
index 4778e7dd98bd..4e8a63fdb304 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_debug.h
+++ b/drivers/scsi/mpt3sas/mpt3sas_debug.h
@@ -3,7 +3,8 @@
*
* This code is based on drivers/scsi/mpt3sas/mpt3sas_debug.c
* Copyright (C) 2012-2014 LSI Corporation
- * (mailto:DL-MPTFusionLinux@lsi.com)
+ * Copyright (C) 2013-2014 Avago Technologies
+ * (mailto: MPT-FusionLinux.pdl@avagotech.com)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
index 94261ee9e72d..5a97e3286719 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
@@ -3,7 +3,8 @@
*
* This code is based on drivers/scsi/mpt3sas/mpt3sas_scsih.c
* Copyright (C) 2012-2014 LSI Corporation
- * (mailto:DL-MPTFusionLinux@lsi.com)
+ * Copyright (C) 2013-2014 Avago Technologies
+ * (mailto: MPT-FusionLinux.pdl@avagotech.com)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
@@ -2392,9 +2393,17 @@ _scsih_host_reset(struct scsi_cmnd *scmd)
ioc->name, scmd);
scsi_print_command(scmd);
+ if (ioc->is_driver_loading) {
+ pr_info(MPT3SAS_FMT "Blocking the host reset\n",
+ ioc->name);
+ r = FAILED;
+ goto out;
+ }
+
retval = mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP,
FORCE_BIG_HAMMER);
r = (retval < 0) ? FAILED : SUCCESS;
+out:
pr_info(MPT3SAS_FMT "host reset: %s scmd(%p)\n",
ioc->name, ((r == SUCCESS) ? "SUCCESS" : "FAILED"), scmd);
@@ -3342,6 +3351,31 @@ _scsih_check_volume_delete_events(struct MPT3SAS_ADAPTER *ioc,
}
/**
+ * _scsih_temp_threshold_events - display temperature threshold exceeded events
+ * @ioc: per adapter object
+ * @event_data: the temp threshold event data
+ * Context: interrupt time.
+ *
+ * Return nothing.
+ */
+static void
+_scsih_temp_threshold_events(struct MPT3SAS_ADAPTER *ioc,
+ Mpi2EventDataTemperature_t *event_data)
+{
+ if (ioc->temp_sensors_count >= event_data->SensorNum) {
+ pr_err(MPT3SAS_FMT "Temperature Threshold flags %s%s%s%s"
+ " exceeded for Sensor: %d !!!\n", ioc->name,
+ ((le16_to_cpu(event_data->Status) & 0x1) == 1) ? "0 " : " ",
+ ((le16_to_cpu(event_data->Status) & 0x2) == 2) ? "1 " : " ",
+ ((le16_to_cpu(event_data->Status) & 0x4) == 4) ? "2 " : " ",
+ ((le16_to_cpu(event_data->Status) & 0x8) == 8) ? "3 " : " ",
+ event_data->SensorNum);
+ pr_err(MPT3SAS_FMT "Current Temp In Celsius: %d\n",
+ ioc->name, event_data->CurrentTemperature);
+ }
+}
+
+/**
* _scsih_flush_running_cmds - completing outstanding commands.
* @ioc: per adapter object
*
@@ -7194,6 +7228,12 @@ mpt3sas_scsih_event_callback(struct MPT3SAS_ADAPTER *ioc, u8 msix_index,
case MPI2_EVENT_IR_PHYSICAL_DISK:
break;
+ case MPI2_EVENT_TEMP_THRESHOLD:
+ _scsih_temp_threshold_events(ioc,
+ (Mpi2EventDataTemperature_t *)
+ mpi_reply->EventData);
+ break;
+
default: /* ignore the rest */
return 1;
}
diff --git a/drivers/scsi/mpt3sas/mpt3sas_transport.c b/drivers/scsi/mpt3sas/mpt3sas_transport.c
index 3637ae6c0171..efb98afc46e0 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_transport.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_transport.c
@@ -3,7 +3,8 @@
*
* This code is based on drivers/scsi/mpt3sas/mpt3sas_transport.c
* Copyright (C) 2012-2014 LSI Corporation
- * (mailto:DL-MPTFusionLinux@lsi.com)
+ * Copyright (C) 2013-2014 Avago Technologies
+ * (mailto: MPT-FusionLinux.pdl@avagotech.com)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
diff --git a/drivers/scsi/mpt3sas/mpt3sas_trigger_diag.c b/drivers/scsi/mpt3sas/mpt3sas_trigger_diag.c
index 8a2dd113f401..b60fd7a3b571 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_trigger_diag.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_trigger_diag.c
@@ -4,7 +4,8 @@
*
* This code is based on drivers/scsi/mpt3sas/mpt3sas_trigger_diag.c
* Copyright (C) 2012-2014 LSI Corporation
- * (mailto:DL-MPTFusionLinux@lsi.com)
+ * Copyright (C) 2013-2014 Avago Technologies
+ * (mailto: MPT-FusionLinux.pdl@avagotech.com)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
diff --git a/drivers/scsi/mpt3sas/mpt3sas_trigger_diag.h b/drivers/scsi/mpt3sas/mpt3sas_trigger_diag.h
index f681db56c53b..6586a463bea9 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_trigger_diag.h
+++ b/drivers/scsi/mpt3sas/mpt3sas_trigger_diag.h
@@ -5,7 +5,8 @@
*
* This code is based on drivers/scsi/mpt3sas/mpt3sas_base.h
* Copyright (C) 2012-2014 LSI Corporation
- * (mailto:DL-MPTFusionLinux@lsi.com)
+ * Copyright (C) 2013-2014 Avago Technologies
+ * (mailto: MPT-FusionLinux.pdl@avagotech.com)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
diff --git a/drivers/scsi/nsp32.c b/drivers/scsi/nsp32.c
index 90abb03c9074..c6077cefbeca 100644
--- a/drivers/scsi/nsp32.c
+++ b/drivers/scsi/nsp32.c
@@ -1441,8 +1441,6 @@ static irqreturn_t do_nsp32_isr(int irq, void *dev_id)
return IRQ_RETVAL(handled);
}
-#undef SPRINTF
-#define SPRINTF(args...) seq_printf(m, ##args)
static int nsp32_show_info(struct seq_file *m, struct Scsi_Host *host)
{
@@ -1458,64 +1456,63 @@ static int nsp32_show_info(struct seq_file *m, struct Scsi_Host *host)
data = (nsp32_hw_data *)host->hostdata;
base = host->io_port;
- SPRINTF("NinjaSCSI-32 status\n\n");
- SPRINTF("Driver version: %s, $Revision: 1.33 $\n", nsp32_release_version);
- SPRINTF("SCSI host No.: %d\n", hostno);
- SPRINTF("IRQ: %d\n", host->irq);
- SPRINTF("IO: 0x%lx-0x%lx\n", host->io_port, host->io_port + host->n_io_port - 1);
- SPRINTF("MMIO(virtual address): 0x%lx-0x%lx\n", host->base, host->base + data->MmioLength - 1);
- SPRINTF("sg_tablesize: %d\n", host->sg_tablesize);
- SPRINTF("Chip revision: 0x%x\n", (nsp32_read2(base, INDEX_REG) >> 8) & 0xff);
+ seq_puts(m, "NinjaSCSI-32 status\n\n");
+ seq_printf(m, "Driver version: %s, $Revision: 1.33 $\n", nsp32_release_version);
+ seq_printf(m, "SCSI host No.: %d\n", hostno);
+ seq_printf(m, "IRQ: %d\n", host->irq);
+ seq_printf(m, "IO: 0x%lx-0x%lx\n", host->io_port, host->io_port + host->n_io_port - 1);
+ seq_printf(m, "MMIO(virtual address): 0x%lx-0x%lx\n", host->base, host->base + data->MmioLength - 1);
+ seq_printf(m, "sg_tablesize: %d\n", host->sg_tablesize);
+ seq_printf(m, "Chip revision: 0x%x\n", (nsp32_read2(base, INDEX_REG) >> 8) & 0xff);
mode_reg = nsp32_index_read1(base, CHIP_MODE);
model = data->pci_devid->driver_data;
#ifdef CONFIG_PM
- SPRINTF("Power Management: %s\n", (mode_reg & OPTF) ? "yes" : "no");
+ seq_printf(m, "Power Management: %s\n", (mode_reg & OPTF) ? "yes" : "no");
#endif
- SPRINTF("OEM: %ld, %s\n", (mode_reg & (OEM0|OEM1)), nsp32_model[model]);
+ seq_printf(m, "OEM: %ld, %s\n", (mode_reg & (OEM0|OEM1)), nsp32_model[model]);
spin_lock_irqsave(&(data->Lock), flags);
- SPRINTF("CurrentSC: 0x%p\n\n", data->CurrentSC);
+ seq_printf(m, "CurrentSC: 0x%p\n\n", data->CurrentSC);
spin_unlock_irqrestore(&(data->Lock), flags);
- SPRINTF("SDTR status\n");
+ seq_puts(m, "SDTR status\n");
for (id = 0; id < ARRAY_SIZE(data->target); id++) {
- SPRINTF("id %d: ", id);
+ seq_printf(m, "id %d: ", id);
if (id == host->this_id) {
- SPRINTF("----- NinjaSCSI-32 host adapter\n");
+ seq_puts(m, "----- NinjaSCSI-32 host adapter\n");
continue;
}
if (data->target[id].sync_flag == SDTR_DONE) {
if (data->target[id].period == 0 &&
data->target[id].offset == ASYNC_OFFSET ) {
- SPRINTF("async");
+ seq_puts(m, "async");
} else {
- SPRINTF(" sync");
+ seq_puts(m, " sync");
}
} else {
- SPRINTF(" none");
+ seq_puts(m, " none");
}
if (data->target[id].period != 0) {
speed = 1000000 / (data->target[id].period * 4);
- SPRINTF(" transfer %d.%dMB/s, offset %d",
+ seq_printf(m, " transfer %d.%dMB/s, offset %d",
speed / 1000,
speed % 1000,
data->target[id].offset
);
}
- SPRINTF("\n");
+ seq_putc(m, '\n');
}
return 0;
}
-#undef SPRINTF
diff --git a/drivers/scsi/pcmcia/nsp_cs.c b/drivers/scsi/pcmcia/nsp_cs.c
index 34aad32829f5..1b6c8833a304 100644
--- a/drivers/scsi/pcmcia/nsp_cs.c
+++ b/drivers/scsi/pcmcia/nsp_cs.c
@@ -1364,9 +1364,6 @@ static const char *nsp_info(struct Scsi_Host *shpnt)
return data->nspinfo;
}
-#undef SPRINTF
-#define SPRINTF(args...) seq_printf(m, ##args)
-
static int nsp_show_info(struct seq_file *m, struct Scsi_Host *host)
{
int id;
@@ -1378,75 +1375,74 @@ static int nsp_show_info(struct seq_file *m, struct Scsi_Host *host)
hostno = host->host_no;
data = (nsp_hw_data *)host->hostdata;
- SPRINTF("NinjaSCSI status\n\n");
- SPRINTF("Driver version: $Revision: 1.23 $\n");
- SPRINTF("SCSI host No.: %d\n", hostno);
- SPRINTF("IRQ: %d\n", host->irq);
- SPRINTF("IO: 0x%lx-0x%lx\n", host->io_port, host->io_port + host->n_io_port - 1);
- SPRINTF("MMIO(virtual address): 0x%lx-0x%lx\n", host->base, host->base + data->MmioLength - 1);
- SPRINTF("sg_tablesize: %d\n", host->sg_tablesize);
+ seq_puts(m, "NinjaSCSI status\n\n"
+ "Driver version: $Revision: 1.23 $\n");
+ seq_printf(m, "SCSI host No.: %d\n", hostno);
+ seq_printf(m, "IRQ: %d\n", host->irq);
+ seq_printf(m, "IO: 0x%lx-0x%lx\n", host->io_port, host->io_port + host->n_io_port - 1);
+ seq_printf(m, "MMIO(virtual address): 0x%lx-0x%lx\n", host->base, host->base + data->MmioLength - 1);
+ seq_printf(m, "sg_tablesize: %d\n", host->sg_tablesize);
- SPRINTF("burst transfer mode: ");
+ seq_puts(m, "burst transfer mode: ");
switch (nsp_burst_mode) {
case BURST_IO8:
- SPRINTF("io8");
+ seq_puts(m, "io8");
break;
case BURST_IO32:
- SPRINTF("io32");
+ seq_puts(m, "io32");
break;
case BURST_MEM32:
- SPRINTF("mem32");
+ seq_puts(m, "mem32");
break;
default:
- SPRINTF("???");
+ seq_puts(m, "???");
break;
}
- SPRINTF("\n");
+ seq_putc(m, '\n');
spin_lock_irqsave(&(data->Lock), flags);
- SPRINTF("CurrentSC: 0x%p\n\n", data->CurrentSC);
+ seq_printf(m, "CurrentSC: 0x%p\n\n", data->CurrentSC);
spin_unlock_irqrestore(&(data->Lock), flags);
- SPRINTF("SDTR status\n");
+ seq_puts(m, "SDTR status\n");
for(id = 0; id < ARRAY_SIZE(data->Sync); id++) {
- SPRINTF("id %d: ", id);
+ seq_printf(m, "id %d: ", id);
if (id == host->this_id) {
- SPRINTF("----- NinjaSCSI-3 host adapter\n");
+ seq_puts(m, "----- NinjaSCSI-3 host adapter\n");
continue;
}
switch(data->Sync[id].SyncNegotiation) {
case SYNC_OK:
- SPRINTF(" sync");
+ seq_puts(m, " sync");
break;
case SYNC_NG:
- SPRINTF("async");
+ seq_puts(m, "async");
break;
case SYNC_NOT_YET:
- SPRINTF(" none");
+ seq_puts(m, " none");
break;
default:
- SPRINTF("?????");
+ seq_puts(m, "?????");
break;
}
if (data->Sync[id].SyncPeriod != 0) {
speed = 1000000 / (data->Sync[id].SyncPeriod * 4);
- SPRINTF(" transfer %d.%dMB/s, offset %d",
+ seq_printf(m, " transfer %d.%dMB/s, offset %d",
speed / 1000,
speed % 1000,
data->Sync[id].SyncOffset
);
}
- SPRINTF("\n");
+ seq_putc(m, '\n');
}
return 0;
}
-#undef SPRINTF
/*---------------------------------------------------------------*/
/* error handler */
diff --git a/drivers/scsi/qla2xxx/qla_dfs.c b/drivers/scsi/qla2xxx/qla_dfs.c
index 2ca39b8e7166..15cf074ffa3c 100644
--- a/drivers/scsi/qla2xxx/qla_dfs.c
+++ b/drivers/scsi/qla2xxx/qla_dfs.c
@@ -23,10 +23,10 @@ qla2x00_dfs_fce_show(struct seq_file *s, void *unused)
mutex_lock(&ha->fce_mutex);
- seq_printf(s, "FCE Trace Buffer\n");
+ seq_puts(s, "FCE Trace Buffer\n");
seq_printf(s, "In Pointer = %llx\n\n", (unsigned long long)ha->fce_wr);
seq_printf(s, "Base = %llx\n\n", (unsigned long long) ha->fce_dma);
- seq_printf(s, "FCE Enable Registers\n");
+ seq_puts(s, "FCE Enable Registers\n");
seq_printf(s, "%08x %08x %08x %08x %08x %08x\n",
ha->fce_mb[0], ha->fce_mb[2], ha->fce_mb[3], ha->fce_mb[4],
ha->fce_mb[5], ha->fce_mb[6]);
@@ -38,11 +38,11 @@ qla2x00_dfs_fce_show(struct seq_file *s, void *unused)
seq_printf(s, "\n%llx: ",
(unsigned long long)((cnt * 4) + fce_start));
else
- seq_printf(s, " ");
+ seq_putc(s, ' ');
seq_printf(s, "%08x", *fce++);
}
- seq_printf(s, "\nEnd\n");
+ seq_puts(s, "\nEnd\n");
mutex_unlock(&ha->fce_mutex);
diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c
index 9b3829931f40..c9c3b579eece 100644
--- a/drivers/scsi/scsi.c
+++ b/drivers/scsi/scsi.c
@@ -531,7 +531,7 @@ void scsi_log_send(struct scsi_cmnd *cmd)
*
* 3: same as 2
*
- * 4: same as 3 plus dump extra junk
+ * 4: same as 3
*/
if (unlikely(scsi_logging_level)) {
level = SCSI_LOG_LEVEL(SCSI_LOG_MLQUEUE_SHIFT,
@@ -540,13 +540,6 @@ void scsi_log_send(struct scsi_cmnd *cmd)
scmd_printk(KERN_INFO, cmd,
"Send: scmd 0x%p\n", cmd);
scsi_print_command(cmd);
- if (level > 3) {
- printk(KERN_INFO "buffer = 0x%p, bufflen = %d,"
- " queuecommand 0x%p\n",
- scsi_sglist(cmd), scsi_bufflen(cmd),
- cmd->device->host->hostt->queuecommand);
-
- }
}
}
}
@@ -572,7 +565,7 @@ void scsi_log_completion(struct scsi_cmnd *cmd, int disposition)
SCSI_LOG_MLCOMPLETE_BITS);
if (((level > 0) && (cmd->result || disposition != SUCCESS)) ||
(level > 1)) {
- scsi_print_result(cmd, "Done: ", disposition);
+ scsi_print_result(cmd, "Done", disposition);
scsi_print_command(cmd);
if (status_byte(cmd->result) & CHECK_CONDITION)
scsi_print_sense(cmd);
diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c
index 4aca1b0378c2..113232135d27 100644
--- a/drivers/scsi/scsi_debug.c
+++ b/drivers/scsi/scsi_debug.c
@@ -80,6 +80,8 @@ static const char *scsi_debug_version_date = "20141022";
#define INVALID_FIELD_IN_PARAM_LIST 0x26
#define UA_RESET_ASC 0x29
#define UA_CHANGED_ASC 0x2a
+#define TARGET_CHANGED_ASC 0x3f
+#define LUNS_CHANGED_ASCQ 0x0e
#define INSUFF_RES_ASC 0x55
#define INSUFF_RES_ASCQ 0x3
#define POWER_ON_RESET_ASCQ 0x0
@@ -91,6 +93,8 @@ static const char *scsi_debug_version_date = "20141022";
#define THRESHOLD_EXCEEDED 0x5d
#define LOW_POWER_COND_ON 0x5e
#define MISCOMPARE_VERIFY_ASC 0x1d
+#define MICROCODE_CHANGED_ASCQ 0x1 /* with TARGET_CHANGED_ASC */
+#define MICROCODE_CHANGED_WO_RESET_ASCQ 0x16
/* Additional Sense Code Qualifier (ASCQ) */
#define ACK_NAK_TO 0x3
@@ -180,7 +184,10 @@ static const char *scsi_debug_version_date = "20141022";
#define SDEBUG_UA_BUS_RESET 1
#define SDEBUG_UA_MODE_CHANGED 2
#define SDEBUG_UA_CAPACITY_CHANGED 3
-#define SDEBUG_NUM_UAS 4
+#define SDEBUG_UA_LUNS_CHANGED 4
+#define SDEBUG_UA_MICROCODE_CHANGED 5 /* simulate firmware change */
+#define SDEBUG_UA_MICROCODE_CHANGED_WO_RESET 6
+#define SDEBUG_NUM_UAS 7
/* for check_readiness() */
#define UAS_ONLY 1 /* check for UAs only */
@@ -326,6 +333,7 @@ static int resp_write_same_10(struct scsi_cmnd *, struct sdebug_dev_info *);
static int resp_write_same_16(struct scsi_cmnd *, struct sdebug_dev_info *);
static int resp_xdwriteread_10(struct scsi_cmnd *, struct sdebug_dev_info *);
static int resp_comp_write(struct scsi_cmnd *, struct sdebug_dev_info *);
+static int resp_write_buffer(struct scsi_cmnd *, struct sdebug_dev_info *);
struct opcode_info_t {
u8 num_attached; /* 0 if this is it (i.e. a leaf); use 0xff
@@ -480,8 +488,9 @@ static const struct opcode_info_t opcode_info_arr[SDEB_I_LAST_ELEMENT + 1] = {
{0, 0x53, 0, F_D_IN | F_D_OUT | FF_DIRECT_IO, resp_xdwriteread_10,
NULL, {10, 0xff, 0xff, 0xff, 0xff, 0xff, 0x1f, 0xff, 0xff, 0xc7,
0, 0, 0, 0, 0, 0} },
- {0, 0, 0, F_INV_OP | FF_RESPOND, NULL, NULL, /* WRITE_BUFFER */
- {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} },
+ {0, 0x3b, 0, F_D_OUT_MAYBE, resp_write_buffer, NULL,
+ {10, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xc7, 0, 0,
+ 0, 0, 0, 0} }, /* WRITE_BUFFER */
{1, 0x41, 0, F_D_OUT_MAYBE | FF_DIRECT_IO, resp_write_same_10,
write_same_iarr, {10, 0xff, 0xff, 0xff, 0xff, 0xff, 0x1f, 0xff,
0xff, 0xc7, 0, 0, 0, 0, 0, 0} },
@@ -782,6 +791,22 @@ static int scsi_debug_ioctl(struct scsi_device *dev, int cmd, void __user *arg)
/* return -ENOTTY; // correct return but upsets fdisk */
}
+static void clear_luns_changed_on_target(struct sdebug_dev_info *devip)
+{
+ struct sdebug_host_info *sdhp;
+ struct sdebug_dev_info *dp;
+
+ spin_lock(&sdebug_host_list_lock);
+ list_for_each_entry(sdhp, &sdebug_host_list, host_list) {
+ list_for_each_entry(dp, &sdhp->dev_info_list, dev_list) {
+ if ((devip->sdbg_host == dp->sdbg_host) &&
+ (devip->target == dp->target))
+ clear_bit(SDEBUG_UA_LUNS_CHANGED, dp->uas_bm);
+ }
+ }
+ spin_unlock(&sdebug_host_list_lock);
+}
+
static int check_readiness(struct scsi_cmnd *SCpnt, int uas_only,
struct sdebug_dev_info * devip)
{
@@ -817,6 +842,36 @@ static int check_readiness(struct scsi_cmnd *SCpnt, int uas_only,
if (debug)
cp = "capacity data changed";
break;
+ case SDEBUG_UA_MICROCODE_CHANGED:
+ mk_sense_buffer(SCpnt, UNIT_ATTENTION,
+ TARGET_CHANGED_ASC, MICROCODE_CHANGED_ASCQ);
+ if (debug)
+ cp = "microcode has been changed";
+ break;
+ case SDEBUG_UA_MICROCODE_CHANGED_WO_RESET:
+ mk_sense_buffer(SCpnt, UNIT_ATTENTION,
+ TARGET_CHANGED_ASC,
+ MICROCODE_CHANGED_WO_RESET_ASCQ);
+ if (debug)
+ cp = "microcode has been changed without reset";
+ break;
+ case SDEBUG_UA_LUNS_CHANGED:
+ /*
+ * SPC-3 behavior is to report a UNIT ATTENTION with
+ * ASC/ASCQ REPORTED LUNS DATA HAS CHANGED on every LUN
+ * on the target, until a REPORT LUNS command is
+ * received. SPC-4 behavior is to report it only once.
+ * NOTE: scsi_debug_scsi_level does not use the same
+ * values as struct scsi_device->scsi_level.
+ */
+ if (scsi_debug_scsi_level >= 6) /* SPC-4 and above */
+ clear_luns_changed_on_target(devip);
+ mk_sense_buffer(SCpnt, UNIT_ATTENTION,
+ TARGET_CHANGED_ASC,
+ LUNS_CHANGED_ASCQ);
+ if (debug)
+ cp = "reported luns data has changed";
+ break;
default:
pr_warn("%s: unexpected unit attention code=%d\n",
__func__, k);
@@ -3033,6 +3088,55 @@ resp_write_same_16(struct scsi_cmnd *scp, struct sdebug_dev_info *devip)
return resp_write_same(scp, lba, num, ei_lba, unmap, ndob);
}
+/* Note the mode field is in the same position as the (lower) service action
+ * field. For the Report supported operation codes command, SPC-4 suggests
+ * each mode of this command should be reported separately; for future. */
+static int
+resp_write_buffer(struct scsi_cmnd *scp, struct sdebug_dev_info *devip)
+{
+ u8 *cmd = scp->cmnd;
+ struct scsi_device *sdp = scp->device;
+ struct sdebug_dev_info *dp;
+ u8 mode;
+
+ mode = cmd[1] & 0x1f;
+ switch (mode) {
+ case 0x4: /* download microcode (MC) and activate (ACT) */
+ /* set UAs on this device only */
+ set_bit(SDEBUG_UA_BUS_RESET, devip->uas_bm);
+ set_bit(SDEBUG_UA_MICROCODE_CHANGED, devip->uas_bm);
+ break;
+ case 0x5: /* download MC, save and ACT */
+ set_bit(SDEBUG_UA_MICROCODE_CHANGED_WO_RESET, devip->uas_bm);
+ break;
+ case 0x6: /* download MC with offsets and ACT */
+ /* set UAs on most devices (LUs) in this target */
+ list_for_each_entry(dp,
+ &devip->sdbg_host->dev_info_list,
+ dev_list)
+ if (dp->target == sdp->id) {
+ set_bit(SDEBUG_UA_BUS_RESET, dp->uas_bm);
+ if (devip != dp)
+ set_bit(SDEBUG_UA_MICROCODE_CHANGED,
+ dp->uas_bm);
+ }
+ break;
+ case 0x7: /* download MC with offsets, save, and ACT */
+ /* set UA on all devices (LUs) in this target */
+ list_for_each_entry(dp,
+ &devip->sdbg_host->dev_info_list,
+ dev_list)
+ if (dp->target == sdp->id)
+ set_bit(SDEBUG_UA_MICROCODE_CHANGED_WO_RESET,
+ dp->uas_bm);
+ break;
+ default:
+ /* do nothing for this command for other mode values */
+ break;
+ }
+ return 0;
+}
+
static int
resp_comp_write(struct scsi_cmnd *scp, struct sdebug_dev_info *devip)
{
@@ -3229,6 +3333,7 @@ static int resp_report_luns(struct scsi_cmnd * scp,
unsigned char arr[SDEBUG_RLUN_ARR_SZ];
unsigned char * max_addr;
+ clear_luns_changed_on_target(devip);
alloc_len = cmd[9] + (cmd[8] << 8) + (cmd[7] << 16) + (cmd[6] << 24);
shortish = (alloc_len < 4);
if (shortish || (select_report > 2)) {
@@ -4369,10 +4474,27 @@ static ssize_t max_luns_store(struct device_driver *ddp, const char *buf,
size_t count)
{
int n;
+ bool changed;
if ((count > 0) && (1 == sscanf(buf, "%d", &n)) && (n >= 0)) {
+ changed = (scsi_debug_max_luns != n);
scsi_debug_max_luns = n;
sdebug_max_tgts_luns();
+ if (changed && (scsi_debug_scsi_level >= 5)) { /* >= SPC-3 */
+ struct sdebug_host_info *sdhp;
+ struct sdebug_dev_info *dp;
+
+ spin_lock(&sdebug_host_list_lock);
+ list_for_each_entry(sdhp, &sdebug_host_list,
+ host_list) {
+ list_for_each_entry(dp, &sdhp->dev_info_list,
+ dev_list) {
+ set_bit(SDEBUG_UA_LUNS_CHANGED,
+ dp->uas_bm);
+ }
+ }
+ spin_unlock(&sdebug_host_list_lock);
+ }
return count;
}
return -EINVAL;
diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c
index 8afb01604d51..4cdaffca17fc 100644
--- a/drivers/scsi/scsi_error.c
+++ b/drivers/scsi/scsi_error.c
@@ -124,41 +124,37 @@ scmd_eh_abort_handler(struct work_struct *work)
if (scsi_host_eh_past_deadline(sdev->host)) {
SCSI_LOG_ERROR_RECOVERY(3,
scmd_printk(KERN_INFO, scmd,
- "scmd %p eh timeout, not aborting\n",
- scmd));
+ "eh timeout, not aborting\n"));
} else {
SCSI_LOG_ERROR_RECOVERY(3,
scmd_printk(KERN_INFO, scmd,
- "aborting command %p\n", scmd));
+ "aborting command\n"));
rtn = scsi_try_to_abort_cmd(sdev->host->hostt, scmd);
if (rtn == SUCCESS) {
set_host_byte(scmd, DID_TIME_OUT);
if (scsi_host_eh_past_deadline(sdev->host)) {
SCSI_LOG_ERROR_RECOVERY(3,
scmd_printk(KERN_INFO, scmd,
- "scmd %p eh timeout, "
- "not retrying aborted "
- "command\n", scmd));
+ "eh timeout, not retrying "
+ "aborted command\n"));
} else if (!scsi_noretry_cmd(scmd) &&
(++scmd->retries <= scmd->allowed)) {
SCSI_LOG_ERROR_RECOVERY(3,
scmd_printk(KERN_WARNING, scmd,
- "scmd %p retry "
- "aborted command\n", scmd));
+ "retry aborted command\n"));
scsi_queue_insert(scmd, SCSI_MLQUEUE_EH_RETRY);
return;
} else {
SCSI_LOG_ERROR_RECOVERY(3,
scmd_printk(KERN_WARNING, scmd,
- "scmd %p finish "
- "aborted command\n", scmd));
+ "finish aborted command\n"));
scsi_finish_command(scmd);
return;
}
} else {
SCSI_LOG_ERROR_RECOVERY(3,
scmd_printk(KERN_INFO, scmd,
- "scmd %p abort %s\n", scmd,
+ "cmd abort %s\n",
(rtn == FAST_IO_FAIL) ?
"not send" : "failed"));
}
@@ -167,8 +163,7 @@ scmd_eh_abort_handler(struct work_struct *work)
if (!scsi_eh_scmd_add(scmd, 0)) {
SCSI_LOG_ERROR_RECOVERY(3,
scmd_printk(KERN_WARNING, scmd,
- "scmd %p terminate "
- "aborted command\n", scmd));
+ "terminate aborted command\n"));
set_host_byte(scmd, DID_TIME_OUT);
scsi_finish_command(scmd);
}
@@ -194,7 +189,7 @@ scsi_abort_command(struct scsi_cmnd *scmd)
scmd->eh_eflags &= ~SCSI_EH_ABORT_SCHEDULED;
SCSI_LOG_ERROR_RECOVERY(3,
scmd_printk(KERN_INFO, scmd,
- "scmd %p previous abort failed\n", scmd));
+ "previous abort failed\n"));
BUG_ON(delayed_work_pending(&scmd->abort_work));
return FAILED;
}
@@ -208,8 +203,7 @@ scsi_abort_command(struct scsi_cmnd *scmd)
spin_unlock_irqrestore(shost->host_lock, flags);
SCSI_LOG_ERROR_RECOVERY(3,
scmd_printk(KERN_INFO, scmd,
- "scmd %p not aborting, host in recovery\n",
- scmd));
+ "not aborting, host in recovery\n"));
return FAILED;
}
@@ -219,8 +213,7 @@ scsi_abort_command(struct scsi_cmnd *scmd)
scmd->eh_eflags |= SCSI_EH_ABORT_SCHEDULED;
SCSI_LOG_ERROR_RECOVERY(3,
- scmd_printk(KERN_INFO, scmd,
- "scmd %p abort scheduled\n", scmd));
+ scmd_printk(KERN_INFO, scmd, "abort scheduled\n"));
queue_delayed_work(shost->tmf_work_q, &scmd->abort_work, HZ / 100);
return SUCCESS;
}
@@ -737,8 +730,7 @@ static void scsi_eh_done(struct scsi_cmnd *scmd)
struct completion *eh_action;
SCSI_LOG_ERROR_RECOVERY(3, scmd_printk(KERN_INFO, scmd,
- "%s scmd: %p result: %x\n",
- __func__, scmd, scmd->result));
+ "%s result: %x\n", __func__, scmd->result));
eh_action = scmd->device->host->eh_action;
if (eh_action)
@@ -868,6 +860,7 @@ static int scsi_try_bus_device_reset(struct scsi_cmnd *scmd)
/**
* scsi_try_to_abort_cmd - Ask host to abort a SCSI command
+ * @hostt: SCSI driver host template
* @scmd: SCSI cmd used to send a target reset
*
* Return value:
@@ -1052,8 +1045,8 @@ retry:
scsi_log_completion(scmd, rtn);
SCSI_LOG_ERROR_RECOVERY(3, scmd_printk(KERN_INFO, scmd,
- "%s: scmd: %p, timeleft: %ld\n",
- __func__, scmd, timeleft));
+ "%s timeleft: %ld\n",
+ __func__, timeleft));
/*
* If there is time left scsi_eh_done got called, and we will examine
@@ -1192,8 +1185,7 @@ int scsi_eh_get_sense(struct list_head *work_q,
continue;
SCSI_LOG_ERROR_RECOVERY(3, scmd_printk(KERN_INFO, scmd,
- "sense requested for %p result %x\n",
- scmd, scmd->result));
+ "sense requested, result %x\n", scmd->result));
SCSI_LOG_ERROR_RECOVERY(3, scsi_print_sense(scmd));
rtn = scsi_decide_disposition(scmd);
@@ -1235,7 +1227,7 @@ retry_tur:
scmd->device->eh_timeout, 0);
SCSI_LOG_ERROR_RECOVERY(3, scmd_printk(KERN_INFO, scmd,
- "%s: scmd %p rtn %x\n", __func__, scmd, rtn));
+ "%s return: %x\n", __func__, rtn));
switch (rtn) {
case NEEDS_RETRY:
@@ -2092,8 +2084,8 @@ void scsi_eh_flush_done_q(struct list_head *done_q)
(++scmd->retries <= scmd->allowed)) {
SCSI_LOG_ERROR_RECOVERY(3,
scmd_printk(KERN_INFO, scmd,
- "%s: flush retry cmd: %p\n",
- current->comm, scmd));
+ "%s: flush retry cmd\n",
+ current->comm));
scsi_queue_insert(scmd, SCSI_MLQUEUE_EH_RETRY);
} else {
/*
@@ -2105,8 +2097,8 @@ void scsi_eh_flush_done_q(struct list_head *done_q)
scmd->result |= (DRIVER_TIMEOUT << 24);
SCSI_LOG_ERROR_RECOVERY(3,
scmd_printk(KERN_INFO, scmd,
- "%s: flush finish cmd: %p\n",
- current->comm, scmd));
+ "%s: flush finish cmd\n",
+ current->comm));
scsi_finish_command(scmd);
}
}
diff --git a/drivers/scsi/scsi_logging.c b/drivers/scsi/scsi_logging.c
new file mode 100644
index 000000000000..bd70339c1242
--- /dev/null
+++ b/drivers/scsi/scsi_logging.c
@@ -0,0 +1,485 @@
+/*
+ * scsi_logging.c
+ *
+ * Copyright (C) 2014 SUSE Linux Products GmbH
+ * Copyright (C) 2014 Hannes Reinecke <hare@suse.de>
+ *
+ * This file is released under the GPLv2
+ */
+
+#include <linux/kernel.h>
+#include <linux/atomic.h>
+
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_eh.h>
+#include <scsi/scsi_dbg.h>
+
+#define SCSI_LOG_SPOOLSIZE 4096
+
+#if (SCSI_LOG_SPOOLSIZE / SCSI_LOG_BUFSIZE) > BITS_PER_LONG
+#warning SCSI logging bitmask too large
+#endif
+
+struct scsi_log_buf {
+ char buffer[SCSI_LOG_SPOOLSIZE];
+ unsigned long map;
+};
+
+static DEFINE_PER_CPU(struct scsi_log_buf, scsi_format_log);
+
+static char *scsi_log_reserve_buffer(size_t *len)
+{
+ struct scsi_log_buf *buf;
+ unsigned long map_bits = sizeof(buf->buffer) / SCSI_LOG_BUFSIZE;
+ unsigned long idx = 0;
+
+ preempt_disable();
+ buf = this_cpu_ptr(&scsi_format_log);
+ idx = find_first_zero_bit(&buf->map, map_bits);
+ if (likely(idx < map_bits)) {
+ while (test_and_set_bit(idx, &buf->map)) {
+ idx = find_next_zero_bit(&buf->map, map_bits, idx);
+ if (idx >= map_bits)
+ break;
+ }
+ }
+ if (WARN_ON(idx >= map_bits)) {
+ preempt_enable();
+ return NULL;
+ }
+ *len = SCSI_LOG_BUFSIZE;
+ return buf->buffer + idx * SCSI_LOG_BUFSIZE;
+}
+
+static void scsi_log_release_buffer(char *bufptr)
+{
+ struct scsi_log_buf *buf;
+ unsigned long idx;
+ int ret;
+
+ buf = this_cpu_ptr(&scsi_format_log);
+ if (bufptr >= buf->buffer &&
+ bufptr < buf->buffer + SCSI_LOG_SPOOLSIZE) {
+ idx = (bufptr - buf->buffer) / SCSI_LOG_BUFSIZE;
+ ret = test_and_clear_bit(idx, &buf->map);
+ WARN_ON(!ret);
+ }
+ preempt_enable();
+}
+
+static inline const char *scmd_name(const struct scsi_cmnd *scmd)
+{
+ return scmd->request->rq_disk ?
+ scmd->request->rq_disk->disk_name : NULL;
+}
+
+static size_t sdev_format_header(char *logbuf, size_t logbuf_len,
+ const char *name, int tag)
+{
+ size_t off = 0;
+
+ if (name)
+ off += scnprintf(logbuf + off, logbuf_len - off,
+ "[%s] ", name);
+
+ if (WARN_ON(off >= logbuf_len))
+ return off;
+
+ if (tag >= 0)
+ off += scnprintf(logbuf + off, logbuf_len - off,
+ "tag#%d ", tag);
+ return off;
+}
+
+void sdev_prefix_printk(const char *level, const struct scsi_device *sdev,
+ const char *name, const char *fmt, ...)
+{
+ va_list args;
+ char *logbuf;
+ size_t off = 0, logbuf_len;
+
+ if (!sdev)
+ return;
+
+ logbuf = scsi_log_reserve_buffer(&logbuf_len);
+ if (!logbuf)
+ return;
+
+ if (name)
+ off += scnprintf(logbuf + off, logbuf_len - off,
+ "[%s] ", name);
+ if (!WARN_ON(off >= logbuf_len)) {
+ va_start(args, fmt);
+ off += vscnprintf(logbuf + off, logbuf_len - off, fmt, args);
+ va_end(args);
+ }
+ dev_printk(level, &sdev->sdev_gendev, "%s", logbuf);
+ scsi_log_release_buffer(logbuf);
+}
+EXPORT_SYMBOL(sdev_prefix_printk);
+
+void scmd_printk(const char *level, const struct scsi_cmnd *scmd,
+ const char *fmt, ...)
+{
+ va_list args;
+ char *logbuf;
+ size_t off = 0, logbuf_len;
+
+ if (!scmd || !scmd->cmnd)
+ return;
+
+ logbuf = scsi_log_reserve_buffer(&logbuf_len);
+ if (!logbuf)
+ return;
+ off = sdev_format_header(logbuf, logbuf_len, scmd_name(scmd),
+ scmd->request->tag);
+ if (off < logbuf_len) {
+ va_start(args, fmt);
+ off += vscnprintf(logbuf + off, logbuf_len - off, fmt, args);
+ va_end(args);
+ }
+ dev_printk(level, &scmd->device->sdev_gendev, "%s", logbuf);
+ scsi_log_release_buffer(logbuf);
+}
+EXPORT_SYMBOL(scmd_printk);
+
+static size_t scsi_format_opcode_name(char *buffer, size_t buf_len,
+ const unsigned char *cdbp)
+{
+ int sa, cdb0;
+ const char *cdb_name = NULL, *sa_name = NULL;
+ size_t off;
+
+ cdb0 = cdbp[0];
+ if (cdb0 == VARIABLE_LENGTH_CMD) {
+ int len = scsi_varlen_cdb_length(cdbp);
+
+ if (len < 10) {
+ off = scnprintf(buffer, buf_len,
+ "short variable length command, len=%d",
+ len);
+ return off;
+ }
+ sa = (cdbp[8] << 8) + cdbp[9];
+ } else
+ sa = cdbp[1] & 0x1f;
+
+ if (!scsi_opcode_sa_name(cdb0, sa, &cdb_name, &sa_name)) {
+ if (cdb_name)
+ off = scnprintf(buffer, buf_len, "%s", cdb_name);
+ else {
+ off = scnprintf(buffer, buf_len, "opcode=0x%x", cdb0);
+ if (WARN_ON(off >= buf_len))
+ return off;
+ if (cdb0 >= VENDOR_SPECIFIC_CDB)
+ off += scnprintf(buffer + off, buf_len - off,
+ " (vendor)");
+ else if (cdb0 >= 0x60 && cdb0 < 0x7e)
+ off += scnprintf(buffer + off, buf_len - off,
+ " (reserved)");
+ }
+ } else {
+ if (sa_name)
+ off = scnprintf(buffer, buf_len, "%s", sa_name);
+ else if (cdb_name)
+ off = scnprintf(buffer, buf_len, "%s, sa=0x%x",
+ cdb_name, sa);
+ else
+ off = scnprintf(buffer, buf_len,
+ "opcode=0x%x, sa=0x%x", cdb0, sa);
+ }
+ WARN_ON(off >= buf_len);
+ return off;
+}
+
+size_t __scsi_format_command(char *logbuf, size_t logbuf_len,
+ const unsigned char *cdb, size_t cdb_len)
+{
+ int len, k;
+ size_t off;
+
+ off = scsi_format_opcode_name(logbuf, logbuf_len, cdb);
+ if (off >= logbuf_len)
+ return off;
+ len = scsi_command_size(cdb);
+ if (cdb_len < len)
+ len = cdb_len;
+ /* print out all bytes in cdb */
+ for (k = 0; k < len; ++k) {
+ if (off > logbuf_len - 3)
+ break;
+ off += scnprintf(logbuf + off, logbuf_len - off,
+ " %02x", cdb[k]);
+ }
+ return off;
+}
+EXPORT_SYMBOL(__scsi_format_command);
+
+void scsi_print_command(struct scsi_cmnd *cmd)
+{
+ int k;
+ char *logbuf;
+ size_t off, logbuf_len;
+
+ if (!cmd->cmnd)
+ return;
+
+ logbuf = scsi_log_reserve_buffer(&logbuf_len);
+ if (!logbuf)
+ return;
+
+ off = sdev_format_header(logbuf, logbuf_len,
+ scmd_name(cmd), cmd->request->tag);
+ if (off >= logbuf_len)
+ goto out_printk;
+ off += scnprintf(logbuf + off, logbuf_len - off, "CDB: ");
+ if (WARN_ON(off >= logbuf_len))
+ goto out_printk;
+
+ off += scsi_format_opcode_name(logbuf + off, logbuf_len - off,
+ cmd->cmnd);
+ if (off >= logbuf_len)
+ goto out_printk;
+
+ /* print out all bytes in cdb */
+ if (cmd->cmd_len > 16) {
+ /* Print opcode in one line and use separate lines for CDB */
+ off += scnprintf(logbuf + off, logbuf_len - off, "\n");
+ dev_printk(KERN_INFO, &cmd->device->sdev_gendev, "%s", logbuf);
+ scsi_log_release_buffer(logbuf);
+ for (k = 0; k < cmd->cmd_len; k += 16) {
+ size_t linelen = min(cmd->cmd_len - k, 16);
+
+ logbuf = scsi_log_reserve_buffer(&logbuf_len);
+ if (!logbuf)
+ break;
+ off = sdev_format_header(logbuf, logbuf_len,
+ scmd_name(cmd),
+ cmd->request->tag);
+ if (!WARN_ON(off > logbuf_len - 58)) {
+ off += scnprintf(logbuf + off, logbuf_len - off,
+ "CDB[%02x]: ", k);
+ hex_dump_to_buffer(&cmd->cmnd[k], linelen,
+ 16, 1, logbuf + off,
+ logbuf_len - off, false);
+ }
+ dev_printk(KERN_INFO, &cmd->device->sdev_gendev, "%s",
+ logbuf);
+ scsi_log_release_buffer(logbuf);
+ }
+ return;
+ }
+ if (!WARN_ON(off > logbuf_len - 49)) {
+ off += scnprintf(logbuf + off, logbuf_len - off, " ");
+ hex_dump_to_buffer(cmd->cmnd, cmd->cmd_len, 16, 1,
+ logbuf + off, logbuf_len - off,
+ false);
+ }
+out_printk:
+ dev_printk(KERN_INFO, &cmd->device->sdev_gendev, "%s", logbuf);
+ scsi_log_release_buffer(logbuf);
+}
+EXPORT_SYMBOL(scsi_print_command);
+
+static size_t
+scsi_format_extd_sense(char *buffer, size_t buf_len,
+ unsigned char asc, unsigned char ascq)
+{
+ size_t off = 0;
+ const char *extd_sense_fmt = NULL;
+ const char *extd_sense_str = scsi_extd_sense_format(asc, ascq,
+ &extd_sense_fmt);
+
+ if (extd_sense_str) {
+ off = scnprintf(buffer, buf_len, "Add. Sense: %s",
+ extd_sense_str);
+ if (extd_sense_fmt)
+ off += scnprintf(buffer + off, buf_len - off,
+ "(%s%x)", extd_sense_fmt, ascq);
+ } else {
+ if (asc >= 0x80)
+ off = scnprintf(buffer, buf_len, "<<vendor>>");
+ off += scnprintf(buffer + off, buf_len - off,
+ "ASC=0x%x ", asc);
+ if (ascq >= 0x80)
+ off += scnprintf(buffer + off, buf_len - off,
+ "<<vendor>>");
+ off += scnprintf(buffer + off, buf_len - off,
+ "ASCQ=0x%x ", ascq);
+ }
+ return off;
+}
+
+static size_t
+scsi_format_sense_hdr(char *buffer, size_t buf_len,
+ const struct scsi_sense_hdr *sshdr)
+{
+ const char *sense_txt;
+ size_t off;
+
+ off = scnprintf(buffer, buf_len, "Sense Key : ");
+ sense_txt = scsi_sense_key_string(sshdr->sense_key);
+ if (sense_txt)
+ off += scnprintf(buffer + off, buf_len - off,
+ "%s ", sense_txt);
+ else
+ off += scnprintf(buffer + off, buf_len - off,
+ "0x%x ", sshdr->sense_key);
+ off += scnprintf(buffer + off, buf_len - off,
+ scsi_sense_is_deferred(sshdr) ? "[deferred] " : "[current] ");
+
+ if (sshdr->response_code >= 0x72)
+ off += scnprintf(buffer + off, buf_len - off, "[descriptor] ");
+ return off;
+}
+
+static void
+scsi_log_dump_sense(const struct scsi_device *sdev, const char *name, int tag,
+ const unsigned char *sense_buffer, int sense_len)
+{
+ char *logbuf;
+ size_t logbuf_len;
+ int i;
+
+ logbuf = scsi_log_reserve_buffer(&logbuf_len);
+ if (!logbuf)
+ return;
+
+ for (i = 0; i < sense_len; i += 16) {
+ int len = min(sense_len - i, 16);
+ size_t off;
+
+ off = sdev_format_header(logbuf, logbuf_len,
+ name, tag);
+ hex_dump_to_buffer(&sense_buffer[i], len, 16, 1,
+ logbuf + off, logbuf_len - off,
+ false);
+ dev_printk(KERN_INFO, &sdev->sdev_gendev, "%s", logbuf);
+ }
+ scsi_log_release_buffer(logbuf);
+}
+
+static void
+scsi_log_print_sense_hdr(const struct scsi_device *sdev, const char *name,
+ int tag, const struct scsi_sense_hdr *sshdr)
+{
+ char *logbuf;
+ size_t off, logbuf_len;
+
+ logbuf = scsi_log_reserve_buffer(&logbuf_len);
+ if (!logbuf)
+ return;
+ off = sdev_format_header(logbuf, logbuf_len, name, tag);
+ off += scsi_format_sense_hdr(logbuf + off, logbuf_len - off, sshdr);
+ dev_printk(KERN_INFO, &sdev->sdev_gendev, "%s", logbuf);
+ scsi_log_release_buffer(logbuf);
+
+ logbuf = scsi_log_reserve_buffer(&logbuf_len);
+ if (!logbuf)
+ return;
+ off = sdev_format_header(logbuf, logbuf_len, name, tag);
+ off += scsi_format_extd_sense(logbuf + off, logbuf_len - off,
+ sshdr->asc, sshdr->ascq);
+ dev_printk(KERN_INFO, &sdev->sdev_gendev, "%s", logbuf);
+ scsi_log_release_buffer(logbuf);
+}
+
+static void
+scsi_log_print_sense(const struct scsi_device *sdev, const char *name, int tag,
+ const unsigned char *sense_buffer, int sense_len)
+{
+ struct scsi_sense_hdr sshdr;
+
+ if (scsi_normalize_sense(sense_buffer, sense_len, &sshdr))
+ scsi_log_print_sense_hdr(sdev, name, tag, &sshdr);
+ else
+ scsi_log_dump_sense(sdev, name, tag, sense_buffer, sense_len);
+}
+
+/*
+ * Print normalized SCSI sense header with a prefix.
+ */
+void
+scsi_print_sense_hdr(const struct scsi_device *sdev, const char *name,
+ const struct scsi_sense_hdr *sshdr)
+{
+ scsi_log_print_sense_hdr(sdev, name, -1, sshdr);
+}
+EXPORT_SYMBOL(scsi_print_sense_hdr);
+
+/* Normalize and print sense buffer with name prefix */
+void __scsi_print_sense(const struct scsi_device *sdev, const char *name,
+ const unsigned char *sense_buffer, int sense_len)
+{
+ scsi_log_print_sense(sdev, name, -1, sense_buffer, sense_len);
+}
+EXPORT_SYMBOL(__scsi_print_sense);
+
+/* Normalize and print sense buffer in SCSI command */
+void scsi_print_sense(const struct scsi_cmnd *cmd)
+{
+ scsi_log_print_sense(cmd->device, scmd_name(cmd), cmd->request->tag,
+ cmd->sense_buffer, SCSI_SENSE_BUFFERSIZE);
+}
+EXPORT_SYMBOL(scsi_print_sense);
+
+void scsi_print_result(const struct scsi_cmnd *cmd, const char *msg,
+ int disposition)
+{
+ char *logbuf;
+ size_t off, logbuf_len;
+ const char *mlret_string = scsi_mlreturn_string(disposition);
+ const char *hb_string = scsi_hostbyte_string(cmd->result);
+ const char *db_string = scsi_driverbyte_string(cmd->result);
+
+ logbuf = scsi_log_reserve_buffer(&logbuf_len);
+ if (!logbuf)
+ return;
+
+ off = sdev_format_header(logbuf, logbuf_len,
+ scmd_name(cmd), cmd->request->tag);
+
+ if (off >= logbuf_len)
+ goto out_printk;
+
+ if (msg) {
+ off += scnprintf(logbuf + off, logbuf_len - off,
+ "%s: ", msg);
+ if (WARN_ON(off >= logbuf_len))
+ goto out_printk;
+ }
+ if (mlret_string)
+ off += scnprintf(logbuf + off, logbuf_len - off,
+ "%s ", mlret_string);
+ else
+ off += scnprintf(logbuf + off, logbuf_len - off,
+ "UNKNOWN(0x%02x) ", disposition);
+ if (WARN_ON(off >= logbuf_len))
+ goto out_printk;
+
+ off += scnprintf(logbuf + off, logbuf_len - off, "Result: ");
+ if (WARN_ON(off >= logbuf_len))
+ goto out_printk;
+
+ if (hb_string)
+ off += scnprintf(logbuf + off, logbuf_len - off,
+ "hostbyte=%s ", hb_string);
+ else
+ off += scnprintf(logbuf + off, logbuf_len - off,
+ "hostbyte=0x%02x ", host_byte(cmd->result));
+ if (WARN_ON(off >= logbuf_len))
+ goto out_printk;
+
+ if (db_string)
+ off += scnprintf(logbuf + off, logbuf_len - off,
+ "driverbyte=%s", db_string);
+ else
+ off += scnprintf(logbuf + off, logbuf_len - off,
+ "driverbyte=0x%02x", driver_byte(cmd->result));
+out_printk:
+ dev_printk(KERN_INFO, &cmd->device->sdev_gendev, "%s", logbuf);
+ scsi_log_release_buffer(logbuf);
+}
+EXPORT_SYMBOL(scsi_print_result);
diff --git a/drivers/scsi/scsi_proc.c b/drivers/scsi/scsi_proc.c
index 6fcefa2da503..251598eb3547 100644
--- a/drivers/scsi/scsi_proc.c
+++ b/drivers/scsi/scsi_proc.c
@@ -189,36 +189,36 @@ static int proc_print_scsidevice(struct device *dev, void *data)
sdev->host->host_no, sdev->channel, sdev->id, sdev->lun);
for (i = 0; i < 8; i++) {
if (sdev->vendor[i] >= 0x20)
- seq_printf(s, "%c", sdev->vendor[i]);
+ seq_putc(s, sdev->vendor[i]);
else
- seq_printf(s, " ");
+ seq_putc(s, ' ');
}
- seq_printf(s, " Model: ");
+ seq_puts(s, " Model: ");
for (i = 0; i < 16; i++) {
if (sdev->model[i] >= 0x20)
- seq_printf(s, "%c", sdev->model[i]);
+ seq_putc(s, sdev->model[i]);
else
- seq_printf(s, " ");
+ seq_putc(s, ' ');
}
- seq_printf(s, " Rev: ");
+ seq_puts(s, " Rev: ");
for (i = 0; i < 4; i++) {
if (sdev->rev[i] >= 0x20)
- seq_printf(s, "%c", sdev->rev[i]);
+ seq_putc(s, sdev->rev[i]);
else
- seq_printf(s, " ");
+ seq_putc(s, ' ');
}
- seq_printf(s, "\n");
+ seq_putc(s, '\n');
seq_printf(s, " Type: %s ", scsi_device_type(sdev->type));
seq_printf(s, " ANSI SCSI revision: %02x",
sdev->scsi_level - (sdev->scsi_level > 1));
if (sdev->scsi_level == 2)
- seq_printf(s, " CCS\n");
+ seq_puts(s, " CCS\n");
else
- seq_printf(s, "\n");
+ seq_putc(s, '\n');
out:
return 0;
diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index 983aed10ff2f..0deb385ad4d6 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -34,6 +34,7 @@
#include <linux/spinlock.h>
#include <linux/async.h>
#include <linux/slab.h>
+#include <asm/unaligned.h>
#include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h>
@@ -98,20 +99,6 @@ char scsi_scan_type[6] = SCSI_SCAN_TYPE_DEFAULT;
module_param_string(scan, scsi_scan_type, sizeof(scsi_scan_type), S_IRUGO);
MODULE_PARM_DESC(scan, "sync, async or none");
-/*
- * max_scsi_report_luns: the maximum number of LUNS that will be
- * returned from the REPORT LUNS command. 8 times this value must
- * be allocated. In theory this could be up to an 8 byte value, but
- * in practice, the maximum number of LUNs suppored by any device
- * is about 16k.
- */
-static unsigned int max_scsi_report_luns = 511;
-
-module_param_named(max_report_luns, max_scsi_report_luns, uint, S_IRUGO|S_IWUSR);
-MODULE_PARM_DESC(max_report_luns,
- "REPORT LUNS maximum number of LUNS received (should be"
- " between 1 and 16384)");
-
static unsigned int scsi_inq_timeout = SCSI_TIMEOUT/HZ + 18;
module_param_named(inq_timeout, scsi_inq_timeout, uint, S_IRUGO|S_IWUSR);
@@ -1367,7 +1354,6 @@ static int scsi_report_lun_scan(struct scsi_target *starget, int bflags,
unsigned int retries;
int result;
struct scsi_lun *lunp, *lun_data;
- u8 *data;
struct scsi_sense_hdr sshdr;
struct scsi_device *sdev;
struct Scsi_Host *shost = dev_to_shost(&starget->dev);
@@ -1407,16 +1393,12 @@ static int scsi_report_lun_scan(struct scsi_target *starget, int bflags,
/*
* Allocate enough to hold the header (the same size as one scsi_lun)
- * plus the max number of luns we are requesting.
- *
- * Reallocating and trying again (with the exact amount we need)
- * would be nice, but then we need to somehow limit the size
- * allocated based on the available memory and the limits of
- * kmalloc - we don't want a kmalloc() failure of a huge value to
- * prevent us from finding any LUNs on this target.
+ * plus the number of luns we are requesting. 511 was the default
+ * value of the now removed max_report_luns parameter.
*/
- length = (max_scsi_report_luns + 1) * sizeof(struct scsi_lun);
- lun_data = kmalloc(length, GFP_ATOMIC |
+ length = (511 + 1) * sizeof(struct scsi_lun);
+retry:
+ lun_data = kmalloc(length, GFP_KERNEL |
(sdev->host->unchecked_isa_dma ? __GFP_DMA : 0));
if (!lun_data) {
printk(ALLOC_FAILURE_MSG, __func__);
@@ -1433,10 +1415,7 @@ static int scsi_report_lun_scan(struct scsi_target *starget, int bflags,
/*
* bytes 6 - 9: length of the command.
*/
- scsi_cmd[6] = (unsigned char) (length >> 24) & 0xff;
- scsi_cmd[7] = (unsigned char) (length >> 16) & 0xff;
- scsi_cmd[8] = (unsigned char) (length >> 8) & 0xff;
- scsi_cmd[9] = (unsigned char) length & 0xff;
+ put_unaligned_be32(length, &scsi_cmd[6]);
scsi_cmd[10] = 0; /* reserved */
scsi_cmd[11] = 0; /* control */
@@ -1484,19 +1463,16 @@ static int scsi_report_lun_scan(struct scsi_target *starget, int bflags,
/*
* Get the length from the first four bytes of lun_data.
*/
- data = (u8 *) lun_data->scsi_lun;
- length = ((data[0] << 24) | (data[1] << 16) |
- (data[2] << 8) | (data[3] << 0));
+ if (get_unaligned_be32(lun_data->scsi_lun) +
+ sizeof(struct scsi_lun) > length) {
+ length = get_unaligned_be32(lun_data->scsi_lun) +
+ sizeof(struct scsi_lun);
+ kfree(lun_data);
+ goto retry;
+ }
+ length = get_unaligned_be32(lun_data->scsi_lun);
num_luns = (length / sizeof(struct scsi_lun));
- if (num_luns > max_scsi_report_luns) {
- sdev_printk(KERN_WARNING, sdev,
- "Only %d (max_scsi_report_luns)"
- " of %d luns reported, try increasing"
- " max_scsi_report_luns.\n",
- max_scsi_report_luns, num_luns);
- num_luns = max_scsi_report_luns;
- }
SCSI_LOG_SCAN_BUS(3, sdev_printk (KERN_INFO, sdev,
"scsi scan: REPORT LUN scan\n"));
diff --git a/drivers/scsi/scsi_trace.c b/drivers/scsi/scsi_trace.c
index 82af28b90294..08bb47b53bc3 100644
--- a/drivers/scsi/scsi_trace.c
+++ b/drivers/scsi/scsi_trace.c
@@ -143,7 +143,7 @@ scsi_trace_rw32(struct trace_seq *p, unsigned char *cdb, int len)
cmd = "WRITE_SAME";
break;
default:
- trace_seq_printf(p, "UNKNOWN");
+ trace_seq_puts(p, "UNKNOWN");
goto out;
}
@@ -204,7 +204,7 @@ scsi_trace_service_action_in(struct trace_seq *p, unsigned char *cdb, int len)
cmd = "GET_LBA_STATUS";
break;
default:
- trace_seq_printf(p, "UNKNOWN");
+ trace_seq_puts(p, "UNKNOWN");
goto out;
}
@@ -249,7 +249,7 @@ scsi_trace_misc(struct trace_seq *p, unsigned char *cdb, int len)
{
const char *ret = trace_seq_buffer_ptr(p);
- trace_seq_printf(p, "-");
+ trace_seq_putc(p, '-');
trace_seq_putc(p, 0);
return ret;
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 05ea0d49a3a3..6b78476d04bb 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -3320,11 +3320,8 @@ module_exit(exit_sd);
static void sd_print_sense_hdr(struct scsi_disk *sdkp,
struct scsi_sense_hdr *sshdr)
{
- scsi_show_sense_hdr(sdkp->device,
- sdkp->disk ? sdkp->disk->disk_name : NULL, sshdr);
- scsi_show_extd_sense(sdkp->device,
- sdkp->disk ? sdkp->disk->disk_name : NULL,
- sshdr->asc, sshdr->ascq);
+ scsi_print_sense_hdr(sdkp->device,
+ sdkp->disk ? sdkp->disk->disk_name : NULL, sshdr);
}
static void sd_print_result(const struct scsi_disk *sdkp, const char *msg,
diff --git a/drivers/scsi/ses.c b/drivers/scsi/ses.c
index b7e79e7646ad..dcb0d76d7312 100644
--- a/drivers/scsi/ses.c
+++ b/drivers/scsi/ses.c
@@ -47,7 +47,6 @@ struct ses_device {
struct ses_component {
u64 addr;
- unsigned char *desc;
};
static int ses_probe(struct device *dev)
@@ -68,6 +67,20 @@ static int ses_probe(struct device *dev)
#define SES_TIMEOUT (30 * HZ)
#define SES_RETRIES 3
+static void init_device_slot_control(unsigned char *dest_desc,
+ struct enclosure_component *ecomp,
+ unsigned char *status)
+{
+ memcpy(dest_desc, status, 4);
+ dest_desc[0] = 0;
+ /* only clear byte 1 for ENCLOSURE_COMPONENT_DEVICE */
+ if (ecomp->type == ENCLOSURE_COMPONENT_DEVICE)
+ dest_desc[1] = 0;
+ dest_desc[2] &= 0xde;
+ dest_desc[3] &= 0x3c;
+}
+
+
static int ses_recv_diag(struct scsi_device *sdev, int page_code,
void *buf, int bufflen)
{
@@ -179,14 +192,22 @@ static int ses_set_fault(struct enclosure_device *edev,
struct enclosure_component *ecomp,
enum enclosure_component_setting val)
{
- unsigned char desc[4] = {0 };
+ unsigned char desc[4];
+ unsigned char *desc_ptr;
+
+ desc_ptr = ses_get_page2_descriptor(edev, ecomp);
+
+ if (!desc_ptr)
+ return -EIO;
+
+ init_device_slot_control(desc, ecomp, desc_ptr);
switch (val) {
case ENCLOSURE_SETTING_DISABLED:
- /* zero is disabled */
+ desc[3] &= 0xdf;
break;
case ENCLOSURE_SETTING_ENABLED:
- desc[3] = 0x20;
+ desc[3] |= 0x20;
break;
default:
/* SES doesn't do the SGPIO blink settings */
@@ -220,14 +241,22 @@ static int ses_set_locate(struct enclosure_device *edev,
struct enclosure_component *ecomp,
enum enclosure_component_setting val)
{
- unsigned char desc[4] = {0 };
+ unsigned char desc[4];
+ unsigned char *desc_ptr;
+
+ desc_ptr = ses_get_page2_descriptor(edev, ecomp);
+
+ if (!desc_ptr)
+ return -EIO;
+
+ init_device_slot_control(desc, ecomp, desc_ptr);
switch (val) {
case ENCLOSURE_SETTING_DISABLED:
- /* zero is disabled */
+ desc[2] &= 0xfd;
break;
case ENCLOSURE_SETTING_ENABLED:
- desc[2] = 0x02;
+ desc[2] |= 0x02;
break;
default:
/* SES doesn't do the SGPIO blink settings */
@@ -240,15 +269,23 @@ static int ses_set_active(struct enclosure_device *edev,
struct enclosure_component *ecomp,
enum enclosure_component_setting val)
{
- unsigned char desc[4] = {0 };
+ unsigned char desc[4];
+ unsigned char *desc_ptr;
+
+ desc_ptr = ses_get_page2_descriptor(edev, ecomp);
+
+ if (!desc_ptr)
+ return -EIO;
+
+ init_device_slot_control(desc, ecomp, desc_ptr);
switch (val) {
case ENCLOSURE_SETTING_DISABLED:
- /* zero is disabled */
+ desc[2] &= 0x7f;
ecomp->active = 0;
break;
case ENCLOSURE_SETTING_ENABLED:
- desc[2] = 0x80;
+ desc[2] |= 0x80;
ecomp->active = 1;
break;
default:
@@ -258,13 +295,63 @@ static int ses_set_active(struct enclosure_device *edev,
return ses_set_page2_descriptor(edev, ecomp, desc);
}
+static int ses_show_id(struct enclosure_device *edev, char *buf)
+{
+ struct ses_device *ses_dev = edev->scratch;
+ unsigned long long id = get_unaligned_be64(ses_dev->page1+8+4);
+
+ return sprintf(buf, "%#llx\n", id);
+}
+
+static void ses_get_power_status(struct enclosure_device *edev,
+ struct enclosure_component *ecomp)
+{
+ unsigned char *desc;
+
+ desc = ses_get_page2_descriptor(edev, ecomp);
+ if (desc)
+ ecomp->power_status = (desc[3] & 0x10) ? 0 : 1;
+}
+
+static int ses_set_power_status(struct enclosure_device *edev,
+ struct enclosure_component *ecomp,
+ int val)
+{
+ unsigned char desc[4];
+ unsigned char *desc_ptr;
+
+ desc_ptr = ses_get_page2_descriptor(edev, ecomp);
+
+ if (!desc_ptr)
+ return -EIO;
+
+ init_device_slot_control(desc, ecomp, desc_ptr);
+
+ switch (val) {
+ /* power = 1 is device_off = 0 and vice versa */
+ case 0:
+ desc[3] |= 0x10;
+ break;
+ case 1:
+ desc[3] &= 0xef;
+ break;
+ default:
+ return -EINVAL;
+ }
+ ecomp->power_status = val;
+ return ses_set_page2_descriptor(edev, ecomp, desc);
+}
+
static struct enclosure_component_callbacks ses_enclosure_callbacks = {
.get_fault = ses_get_fault,
.set_fault = ses_set_fault,
.get_status = ses_get_status,
.get_locate = ses_get_locate,
.set_locate = ses_set_locate,
+ .get_power_status = ses_get_power_status,
+ .set_power_status = ses_set_power_status,
.set_active = ses_set_active,
+ .show_id = ses_show_id,
};
struct ses_host_edev {
@@ -298,19 +385,26 @@ static void ses_process_descriptor(struct enclosure_component *ecomp,
int invalid = desc[0] & 0x80;
enum scsi_protocol proto = desc[0] & 0x0f;
u64 addr = 0;
+ int slot = -1;
struct ses_component *scomp = ecomp->scratch;
unsigned char *d;
- scomp->desc = desc;
-
if (invalid)
return;
switch (proto) {
+ case SCSI_PROTOCOL_FCP:
+ if (eip) {
+ d = desc + 4;
+ slot = d[3];
+ }
+ break;
case SCSI_PROTOCOL_SAS:
- if (eip)
+ if (eip) {
+ d = desc + 4;
+ slot = d[3];
d = desc + 8;
- else
+ } else
d = desc + 4;
/* only take the phy0 addr */
addr = (u64)d[12] << 56 |
@@ -326,6 +420,7 @@ static void ses_process_descriptor(struct enclosure_component *ecomp,
/* FIXME: Need to add more protocols than just SAS */
break;
}
+ ecomp->slot = slot;
scomp->addr = addr;
}
@@ -349,7 +444,8 @@ static int ses_enclosure_find_by_addr(struct enclosure_device *edev,
if (scomp->addr != efd->addr)
continue;
- enclosure_add_device(edev, i, efd->dev);
+ if (enclosure_add_device(edev, i, efd->dev) == 0)
+ kobject_uevent(&efd->dev->kobj, KOBJ_CHANGE);
return 1;
}
return 0;
@@ -423,16 +519,24 @@ static void ses_enclosure_data_process(struct enclosure_device *edev,
type_ptr[0] == ENCLOSURE_COMPONENT_ARRAY_DEVICE) {
if (create)
- ecomp = enclosure_component_register(edev,
- components++,
- type_ptr[0],
- name);
+ ecomp = enclosure_component_alloc(
+ edev,
+ components++,
+ type_ptr[0],
+ name);
else
ecomp = &edev->component[components++];
- if (!IS_ERR(ecomp) && addl_desc_ptr)
- ses_process_descriptor(ecomp,
- addl_desc_ptr);
+ if (!IS_ERR(ecomp)) {
+ ses_get_power_status(edev, ecomp);
+ if (addl_desc_ptr)
+ ses_process_descriptor(
+ ecomp,
+ addl_desc_ptr);
+ if (create)
+ enclosure_component_register(
+ ecomp);
+ }
}
if (desc_ptr)
desc_ptr += len;
diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c
index b14f64cb9724..a668c88ea150 100644
--- a/drivers/scsi/sg.c
+++ b/drivers/scsi/sg.c
@@ -763,7 +763,7 @@ static int
sg_common_write(Sg_fd * sfp, Sg_request * srp,
unsigned char *cmnd, int timeout, int blocking)
{
- int k, data_dir, at_head;
+ int k, at_head;
Sg_device *sdp = sfp->parentdp;
sg_io_hdr_t *hp = &srp->header;
@@ -793,21 +793,6 @@ sg_common_write(Sg_fd * sfp, Sg_request * srp,
return -ENODEV;
}
- switch (hp->dxfer_direction) {
- case SG_DXFER_TO_FROM_DEV:
- case SG_DXFER_FROM_DEV:
- data_dir = DMA_FROM_DEVICE;
- break;
- case SG_DXFER_TO_DEV:
- data_dir = DMA_TO_DEVICE;
- break;
- case SG_DXFER_UNKNOWN:
- data_dir = DMA_BIDIRECTIONAL;
- break;
- default:
- data_dir = DMA_NONE;
- break;
- }
hp->duration = jiffies_to_msecs(jiffies);
if (hp->interface_id != '\0' && /* v3 (or later) interface */
(SG_FLAG_Q_AT_TAIL & hp->flags))
diff --git a/drivers/scsi/sr_ioctl.c b/drivers/scsi/sr_ioctl.c
index fb929fac22ba..03054c0e7689 100644
--- a/drivers/scsi/sr_ioctl.c
+++ b/drivers/scsi/sr_ioctl.c
@@ -245,9 +245,6 @@ int sr_do_ioctl(Scsi_CD *cd, struct packet_command *cgc)
sr_printk(KERN_INFO, cd,
"CDROM not ready. Make sure there "
"is a disc in the drive.\n");
-#ifdef DEBUG
- scsi_print_sense_hdr(cd->device, cd->cdi.name, &sshdr);
-#endif
err = -ENOMEDIUM;
break;
case ILLEGAL_REQUEST:
@@ -256,16 +253,8 @@ int sr_do_ioctl(Scsi_CD *cd, struct packet_command *cgc)
sshdr.ascq == 0x00)
/* sense: Invalid command operation code */
err = -EDRIVE_CANT_DO_THIS;
-#ifdef DEBUG
- __scsi_print_command(cgc->cmd, CDROM_PACKET_SIZE);
- scsi_print_sense_hdr(cd->device, cd->cdi.name, &sshdr);
-#endif
break;
default:
- sr_printk(KERN_ERR, cd,
- "CDROM (ioctl) error, command: ");
- __scsi_print_command(cgc->cmd, CDROM_PACKET_SIZE);
- scsi_print_sense_hdr(cd->device, cd->cdi.name, &sshdr);
err = -EIO;
}
}
diff --git a/drivers/scsi/storvsc_drv.c b/drivers/scsi/storvsc_drv.c
index 4cff0ddc2c25..efc6e446b6c8 100644
--- a/drivers/scsi/storvsc_drv.c
+++ b/drivers/scsi/storvsc_drv.c
@@ -32,7 +32,6 @@
#include <linux/module.h>
#include <linux/device.h>
#include <linux/hyperv.h>
-#include <linux/mempool.h>
#include <linux/blkdev.h>
#include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h>
@@ -309,14 +308,6 @@ enum storvsc_request_type {
* This is the end of Protocol specific defines.
*/
-
-/*
- * We setup a mempool to allocate request structures for this driver
- * on a per-lun basis. The following define specifies the number of
- * elements in the pool.
- */
-
-#define STORVSC_MIN_BUF_NR 64
static int storvsc_ringbuffer_size = (20 * PAGE_SIZE);
module_param(storvsc_ringbuffer_size, int, S_IRUGO);
@@ -346,7 +337,6 @@ static void storvsc_on_channel_callback(void *context);
#define STORVSC_IDE_MAX_CHANNELS 1
struct storvsc_cmd_request {
- struct list_head entry;
struct scsi_cmnd *cmd;
unsigned int bounce_sgl_count;
@@ -357,7 +347,6 @@ struct storvsc_cmd_request {
/* Synchronize the request/response if needed */
struct completion wait_event;
- unsigned char *sense_buffer;
struct hv_multipage_buffer data_buffer;
struct vstor_packet vstor_packet;
};
@@ -389,11 +378,6 @@ struct storvsc_device {
struct storvsc_cmd_request reset_request;
};
-struct stor_mem_pools {
- struct kmem_cache *request_pool;
- mempool_t *request_mempool;
-};
-
struct hv_host_device {
struct hv_device *dev;
unsigned int port;
@@ -426,21 +410,42 @@ done:
kfree(wrk);
}
-static void storvsc_bus_scan(struct work_struct *work)
+static void storvsc_host_scan(struct work_struct *work)
{
struct storvsc_scan_work *wrk;
- int id, order_id;
+ struct Scsi_Host *host;
+ struct scsi_device *sdev;
+ unsigned long flags;
wrk = container_of(work, struct storvsc_scan_work, work);
- for (id = 0; id < wrk->host->max_id; ++id) {
- if (wrk->host->reverse_ordering)
- order_id = wrk->host->max_id - id - 1;
- else
- order_id = id;
-
- scsi_scan_target(&wrk->host->shost_gendev, 0,
- order_id, SCAN_WILD_CARD, 1);
+ host = wrk->host;
+
+ /*
+ * Before scanning the host, first check to see if any of the
+ * currrently known devices have been hot removed. We issue a
+ * "unit ready" command against all currently known devices.
+ * This I/O will result in an error for devices that have been
+ * removed. As part of handling the I/O error, we remove the device.
+ *
+ * When a LUN is added or removed, the host sends us a signal to
+ * scan the host. Thus we are forced to discover the LUNs that
+ * may have been removed this way.
+ */
+ mutex_lock(&host->scan_mutex);
+ spin_lock_irqsave(host->host_lock, flags);
+ list_for_each_entry(sdev, &host->__devices, siblings) {
+ spin_unlock_irqrestore(host->host_lock, flags);
+ scsi_test_unit_ready(sdev, 1, 1, NULL);
+ spin_lock_irqsave(host->host_lock, flags);
+ continue;
}
+ spin_unlock_irqrestore(host->host_lock, flags);
+ mutex_unlock(&host->scan_mutex);
+ /*
+ * Now scan the host to discover LUNs that may have been added.
+ */
+ scsi_scan_host(host);
+
kfree(wrk);
}
@@ -1070,10 +1075,8 @@ static void storvsc_command_completion(struct storvsc_cmd_request *cmd_request)
{
struct scsi_cmnd *scmnd = cmd_request->cmd;
struct hv_host_device *host_dev = shost_priv(scmnd->device->host);
- void (*scsi_done_fn)(struct scsi_cmnd *);
struct scsi_sense_hdr sense_hdr;
struct vmscsi_request *vm_srb;
- struct stor_mem_pools *memp = scmnd->device->hostdata;
struct Scsi_Host *host;
struct storvsc_device *stor_dev;
struct hv_device *dev = host_dev->dev;
@@ -1109,14 +1112,7 @@ static void storvsc_command_completion(struct storvsc_cmd_request *cmd_request)
cmd_request->data_buffer.len -
vm_srb->data_transfer_length);
- scsi_done_fn = scmnd->scsi_done;
-
- scmnd->host_scribble = NULL;
- scmnd->scsi_done = NULL;
-
- scsi_done_fn(scmnd);
-
- mempool_free(cmd_request, memp->request_mempool);
+ scmnd->scsi_done(scmnd);
}
static void storvsc_on_io_completion(struct hv_device *device,
@@ -1160,7 +1156,7 @@ static void storvsc_on_io_completion(struct hv_device *device,
SRB_STATUS_AUTOSENSE_VALID) {
/* autosense data available */
- memcpy(request->sense_buffer,
+ memcpy(request->cmd->sense_buffer,
vstor_packet->vm_srb.sense_data,
vstor_packet->vm_srb.sense_info_length);
@@ -1198,7 +1194,7 @@ static void storvsc_on_receive(struct hv_device *device,
if (!work)
return;
- INIT_WORK(&work->work, storvsc_bus_scan);
+ INIT_WORK(&work->work, storvsc_host_scan);
work->host = stor_device->host;
schedule_work(&work->work);
break;
@@ -1378,55 +1374,6 @@ static int storvsc_do_io(struct hv_device *device,
return ret;
}
-static int storvsc_device_alloc(struct scsi_device *sdevice)
-{
- struct stor_mem_pools *memp;
- int number = STORVSC_MIN_BUF_NR;
-
- memp = kzalloc(sizeof(struct stor_mem_pools), GFP_KERNEL);
- if (!memp)
- return -ENOMEM;
-
- memp->request_pool =
- kmem_cache_create(dev_name(&sdevice->sdev_dev),
- sizeof(struct storvsc_cmd_request), 0,
- SLAB_HWCACHE_ALIGN, NULL);
-
- if (!memp->request_pool)
- goto err0;
-
- memp->request_mempool = mempool_create(number, mempool_alloc_slab,
- mempool_free_slab,
- memp->request_pool);
-
- if (!memp->request_mempool)
- goto err1;
-
- sdevice->hostdata = memp;
-
- return 0;
-
-err1:
- kmem_cache_destroy(memp->request_pool);
-
-err0:
- kfree(memp);
- return -ENOMEM;
-}
-
-static void storvsc_device_destroy(struct scsi_device *sdevice)
-{
- struct stor_mem_pools *memp = sdevice->hostdata;
-
- if (!memp)
- return;
-
- mempool_destroy(memp->request_mempool);
- kmem_cache_destroy(memp->request_pool);
- kfree(memp);
- sdevice->hostdata = NULL;
-}
-
static int storvsc_device_configure(struct scsi_device *sdevice)
{
scsi_change_queue_depth(sdevice, STORVSC_MAX_IO_REQUESTS);
@@ -1447,6 +1394,19 @@ static int storvsc_device_configure(struct scsi_device *sdevice)
*/
sdevice->sdev_bflags |= msft_blist_flags;
+ /*
+ * If the host is WIN8 or WIN8 R2, claim conformance to SPC-3
+ * if the device is a MSFT virtual device.
+ */
+ if (!strncmp(sdevice->vendor, "Msft", 4)) {
+ switch (vmbus_proto_version) {
+ case VERSION_WIN8:
+ case VERSION_WIN8_1:
+ sdevice->scsi_level = SCSI_SPC_3;
+ break;
+ }
+ }
+
return 0;
}
@@ -1561,13 +1521,11 @@ static int storvsc_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *scmnd)
int ret;
struct hv_host_device *host_dev = shost_priv(host);
struct hv_device *dev = host_dev->dev;
- struct storvsc_cmd_request *cmd_request;
- unsigned int request_size = 0;
+ struct storvsc_cmd_request *cmd_request = scsi_cmd_priv(scmnd);
int i;
struct scatterlist *sgl;
unsigned int sg_count = 0;
struct vmscsi_request *vm_srb;
- struct stor_mem_pools *memp = scmnd->device->hostdata;
if (vmstor_current_major <= VMSTOR_WIN8_MAJOR) {
/*
@@ -1584,25 +1542,9 @@ static int storvsc_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *scmnd)
}
}
- request_size = sizeof(struct storvsc_cmd_request);
-
- cmd_request = mempool_alloc(memp->request_mempool,
- GFP_ATOMIC);
-
- /*
- * We might be invoked in an interrupt context; hence
- * mempool_alloc() can fail.
- */
- if (!cmd_request)
- return SCSI_MLQUEUE_DEVICE_BUSY;
-
- memset(cmd_request, 0, sizeof(struct storvsc_cmd_request));
-
/* Setup the cmd request */
cmd_request->cmd = scmnd;
- scmnd->host_scribble = (unsigned char *)cmd_request;
-
vm_srb = &cmd_request->vstor_packet.vm_srb;
vm_srb->win8_extension.time_out_value = 60;
@@ -1637,9 +1579,6 @@ static int storvsc_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *scmnd)
memcpy(vm_srb->cdb, scmnd->cmnd, vm_srb->cdb_length);
- cmd_request->sense_buffer = scmnd->sense_buffer;
-
-
cmd_request->data_buffer.len = scsi_bufflen(scmnd);
if (scsi_sg_count(scmnd)) {
sgl = (struct scatterlist *)scsi_sglist(scmnd);
@@ -1651,10 +1590,8 @@ static int storvsc_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *scmnd)
create_bounce_buffer(sgl, scsi_sg_count(scmnd),
scsi_bufflen(scmnd),
vm_srb->data_in);
- if (!cmd_request->bounce_sgl) {
- ret = SCSI_MLQUEUE_HOST_BUSY;
- goto queue_error;
- }
+ if (!cmd_request->bounce_sgl)
+ return SCSI_MLQUEUE_HOST_BUSY;
cmd_request->bounce_sgl_count =
ALIGN(scsi_bufflen(scmnd), PAGE_SIZE) >>
@@ -1692,27 +1629,21 @@ static int storvsc_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *scmnd)
destroy_bounce_buffer(cmd_request->bounce_sgl,
cmd_request->bounce_sgl_count);
- ret = SCSI_MLQUEUE_DEVICE_BUSY;
- goto queue_error;
+ return SCSI_MLQUEUE_DEVICE_BUSY;
}
return 0;
-
-queue_error:
- mempool_free(cmd_request, memp->request_mempool);
- scmnd->host_scribble = NULL;
- return ret;
}
static struct scsi_host_template scsi_driver = {
.module = THIS_MODULE,
.name = "storvsc_host_t",
+ .cmd_size = sizeof(struct storvsc_cmd_request),
.bios_param = storvsc_get_chs,
.queuecommand = storvsc_queuecommand,
.eh_host_reset_handler = storvsc_host_reset_handler,
+ .proc_name = "storvsc_host",
.eh_timed_out = storvsc_eh_timed_out,
- .slave_alloc = storvsc_device_alloc,
- .slave_destroy = storvsc_device_destroy,
.slave_configure = storvsc_device_configure,
.cmd_per_lun = 255,
.can_queue = STORVSC_MAX_IO_REQUESTS*STORVSC_MAX_TARGETS,
@@ -1760,6 +1691,9 @@ static int storvsc_probe(struct hv_device *device,
bool dev_is_ide = ((dev_id->driver_data == IDE_GUID) ? true : false);
int target = 0;
struct storvsc_device *stor_device;
+ int max_luns_per_target;
+ int max_targets;
+ int max_channels;
/*
* Based on the windows host we are running on,
@@ -1773,12 +1707,18 @@ static int storvsc_probe(struct hv_device *device,
vmscsi_size_delta = sizeof(struct vmscsi_win8_extension);
vmstor_current_major = VMSTOR_WIN7_MAJOR;
vmstor_current_minor = VMSTOR_WIN7_MINOR;
+ max_luns_per_target = STORVSC_IDE_MAX_LUNS_PER_TARGET;
+ max_targets = STORVSC_IDE_MAX_TARGETS;
+ max_channels = STORVSC_IDE_MAX_CHANNELS;
break;
default:
sense_buffer_size = POST_WIN7_STORVSC_SENSE_BUFFER_SIZE;
vmscsi_size_delta = 0;
vmstor_current_major = VMSTOR_WIN8_MAJOR;
vmstor_current_minor = VMSTOR_WIN8_MINOR;
+ max_luns_per_target = STORVSC_MAX_LUNS_PER_TARGET;
+ max_targets = STORVSC_MAX_TARGETS;
+ max_channels = STORVSC_MAX_CHANNELS;
break;
}
@@ -1826,9 +1766,9 @@ static int storvsc_probe(struct hv_device *device,
break;
case SCSI_GUID:
- host->max_lun = STORVSC_MAX_LUNS_PER_TARGET;
- host->max_id = STORVSC_MAX_TARGETS;
- host->max_channel = STORVSC_MAX_CHANNELS - 1;
+ host->max_lun = max_luns_per_target;
+ host->max_id = max_targets;
+ host->max_channel = max_channels - 1;
break;
default:
diff --git a/drivers/scsi/ufs/Kconfig b/drivers/scsi/ufs/Kconfig
index 6e07b2afddeb..8a1f4b355416 100644
--- a/drivers/scsi/ufs/Kconfig
+++ b/drivers/scsi/ufs/Kconfig
@@ -70,3 +70,16 @@ config SCSI_UFSHCD_PLATFORM
If you have a controller with this interface, say Y or M here.
If unsure, say N.
+
+config SCSI_UFS_QCOM
+ bool "QCOM specific hooks to UFS controller platform driver"
+ depends on SCSI_UFSHCD_PLATFORM && ARCH_MSM
+ select PHY_QCOM_UFS
+ help
+ This selects the QCOM specific additions to UFSHCD platform driver.
+ UFS host on QCOM needs some vendor specific configuration before
+ accessing the hardware which includes PHY configuration and vendor
+ specific registers.
+
+ Select this if you have UFS controller on QCOM chipset.
+ If unsure, say N.
diff --git a/drivers/scsi/ufs/Makefile b/drivers/scsi/ufs/Makefile
index 1e5bd48457d6..8303bcce7a23 100644
--- a/drivers/scsi/ufs/Makefile
+++ b/drivers/scsi/ufs/Makefile
@@ -1,4 +1,5 @@
# UFSHCD makefile
+obj-$(CONFIG_SCSI_UFS_QCOM) += ufs-qcom.o
obj-$(CONFIG_SCSI_UFSHCD) += ufshcd.o
obj-$(CONFIG_SCSI_UFSHCD_PCI) += ufshcd-pci.o
obj-$(CONFIG_SCSI_UFSHCD_PLATFORM) += ufshcd-pltfrm.o
diff --git a/drivers/scsi/ufs/ufs-qcom.c b/drivers/scsi/ufs/ufs-qcom.c
new file mode 100644
index 000000000000..9217af9bf734
--- /dev/null
+++ b/drivers/scsi/ufs/ufs-qcom.c
@@ -0,0 +1,1004 @@
+/*
+ * Copyright (c) 2013-2015, Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/time.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/phy/phy.h>
+
+#include <linux/phy/phy-qcom-ufs.h>
+#include "ufshcd.h"
+#include "unipro.h"
+#include "ufs-qcom.h"
+#include "ufshci.h"
+
+static struct ufs_qcom_host *ufs_qcom_hosts[MAX_UFS_QCOM_HOSTS];
+
+static void ufs_qcom_get_speed_mode(struct ufs_pa_layer_attr *p, char *result);
+static int ufs_qcom_get_bus_vote(struct ufs_qcom_host *host,
+ const char *speed_mode);
+static int ufs_qcom_set_bus_vote(struct ufs_qcom_host *host, int vote);
+
+static int ufs_qcom_get_connected_tx_lanes(struct ufs_hba *hba, u32 *tx_lanes)
+{
+ int err = 0;
+
+ err = ufshcd_dme_get(hba,
+ UIC_ARG_MIB(PA_CONNECTEDTXDATALANES), tx_lanes);
+ if (err)
+ dev_err(hba->dev, "%s: couldn't read PA_CONNECTEDTXDATALANES %d\n",
+ __func__, err);
+
+ return err;
+}
+
+static int ufs_qcom_host_clk_get(struct device *dev,
+ const char *name, struct clk **clk_out)
+{
+ struct clk *clk;
+ int err = 0;
+
+ clk = devm_clk_get(dev, name);
+ if (IS_ERR(clk)) {
+ err = PTR_ERR(clk);
+ dev_err(dev, "%s: failed to get %s err %d",
+ __func__, name, err);
+ } else {
+ *clk_out = clk;
+ }
+
+ return err;
+}
+
+static int ufs_qcom_host_clk_enable(struct device *dev,
+ const char *name, struct clk *clk)
+{
+ int err = 0;
+
+ err = clk_prepare_enable(clk);
+ if (err)
+ dev_err(dev, "%s: %s enable failed %d\n", __func__, name, err);
+
+ return err;
+}
+
+static void ufs_qcom_disable_lane_clks(struct ufs_qcom_host *host)
+{
+ if (!host->is_lane_clks_enabled)
+ return;
+
+ clk_disable_unprepare(host->tx_l1_sync_clk);
+ clk_disable_unprepare(host->tx_l0_sync_clk);
+ clk_disable_unprepare(host->rx_l1_sync_clk);
+ clk_disable_unprepare(host->rx_l0_sync_clk);
+
+ host->is_lane_clks_enabled = false;
+}
+
+static int ufs_qcom_enable_lane_clks(struct ufs_qcom_host *host)
+{
+ int err = 0;
+ struct device *dev = host->hba->dev;
+
+ if (host->is_lane_clks_enabled)
+ return 0;
+
+ err = ufs_qcom_host_clk_enable(dev, "rx_lane0_sync_clk",
+ host->rx_l0_sync_clk);
+ if (err)
+ goto out;
+
+ err = ufs_qcom_host_clk_enable(dev, "tx_lane0_sync_clk",
+ host->tx_l0_sync_clk);
+ if (err)
+ goto disable_rx_l0;
+
+ err = ufs_qcom_host_clk_enable(dev, "rx_lane1_sync_clk",
+ host->rx_l1_sync_clk);
+ if (err)
+ goto disable_tx_l0;
+
+ err = ufs_qcom_host_clk_enable(dev, "tx_lane1_sync_clk",
+ host->tx_l1_sync_clk);
+ if (err)
+ goto disable_rx_l1;
+
+ host->is_lane_clks_enabled = true;
+ goto out;
+
+disable_rx_l1:
+ clk_disable_unprepare(host->rx_l1_sync_clk);
+disable_tx_l0:
+ clk_disable_unprepare(host->tx_l0_sync_clk);
+disable_rx_l0:
+ clk_disable_unprepare(host->rx_l0_sync_clk);
+out:
+ return err;
+}
+
+static int ufs_qcom_init_lane_clks(struct ufs_qcom_host *host)
+{
+ int err = 0;
+ struct device *dev = host->hba->dev;
+
+ err = ufs_qcom_host_clk_get(dev,
+ "rx_lane0_sync_clk", &host->rx_l0_sync_clk);
+ if (err)
+ goto out;
+
+ err = ufs_qcom_host_clk_get(dev,
+ "tx_lane0_sync_clk", &host->tx_l0_sync_clk);
+ if (err)
+ goto out;
+
+ err = ufs_qcom_host_clk_get(dev, "rx_lane1_sync_clk",
+ &host->rx_l1_sync_clk);
+ if (err)
+ goto out;
+
+ err = ufs_qcom_host_clk_get(dev, "tx_lane1_sync_clk",
+ &host->tx_l1_sync_clk);
+out:
+ return err;
+}
+
+static int ufs_qcom_link_startup_post_change(struct ufs_hba *hba)
+{
+ struct ufs_qcom_host *host = hba->priv;
+ struct phy *phy = host->generic_phy;
+ u32 tx_lanes;
+ int err = 0;
+
+ err = ufs_qcom_get_connected_tx_lanes(hba, &tx_lanes);
+ if (err)
+ goto out;
+
+ err = ufs_qcom_phy_set_tx_lane_enable(phy, tx_lanes);
+ if (err)
+ dev_err(hba->dev, "%s: ufs_qcom_phy_set_tx_lane_enable failed\n",
+ __func__);
+
+out:
+ return err;
+}
+
+static int ufs_qcom_check_hibern8(struct ufs_hba *hba)
+{
+ int err;
+ u32 tx_fsm_val = 0;
+ unsigned long timeout = jiffies + msecs_to_jiffies(HBRN8_POLL_TOUT_MS);
+
+ do {
+ err = ufshcd_dme_get(hba,
+ UIC_ARG_MIB(MPHY_TX_FSM_STATE), &tx_fsm_val);
+ if (err || tx_fsm_val == TX_FSM_HIBERN8)
+ break;
+
+ /* sleep for max. 200us */
+ usleep_range(100, 200);
+ } while (time_before(jiffies, timeout));
+
+ /*
+ * we might have scheduled out for long during polling so
+ * check the state again.
+ */
+ if (time_after(jiffies, timeout))
+ err = ufshcd_dme_get(hba,
+ UIC_ARG_MIB(MPHY_TX_FSM_STATE), &tx_fsm_val);
+
+ if (err) {
+ dev_err(hba->dev, "%s: unable to get TX_FSM_STATE, err %d\n",
+ __func__, err);
+ } else if (tx_fsm_val != TX_FSM_HIBERN8) {
+ err = tx_fsm_val;
+ dev_err(hba->dev, "%s: invalid TX_FSM_STATE = %d\n",
+ __func__, err);
+ }
+
+ return err;
+}
+
+static int ufs_qcom_power_up_sequence(struct ufs_hba *hba)
+{
+ struct ufs_qcom_host *host = hba->priv;
+ struct phy *phy = host->generic_phy;
+ int ret = 0;
+ u8 major;
+ u16 minor, step;
+ bool is_rate_B = (UFS_QCOM_LIMIT_HS_RATE == PA_HS_MODE_B)
+ ? true : false;
+
+ /* Assert PHY reset and apply PHY calibration values */
+ ufs_qcom_assert_reset(hba);
+ /* provide 1ms delay to let the reset pulse propagate */
+ usleep_range(1000, 1100);
+
+ ufs_qcom_get_controller_revision(hba, &major, &minor, &step);
+ ufs_qcom_phy_save_controller_version(phy, major, minor, step);
+ ret = ufs_qcom_phy_calibrate_phy(phy, is_rate_B);
+ if (ret) {
+ dev_err(hba->dev, "%s: ufs_qcom_phy_calibrate_phy() failed, ret = %d\n",
+ __func__, ret);
+ goto out;
+ }
+
+ /* De-assert PHY reset and start serdes */
+ ufs_qcom_deassert_reset(hba);
+
+ /*
+ * after reset deassertion, phy will need all ref clocks,
+ * voltage, current to settle down before starting serdes.
+ */
+ usleep_range(1000, 1100);
+ ret = ufs_qcom_phy_start_serdes(phy);
+ if (ret) {
+ dev_err(hba->dev, "%s: ufs_qcom_phy_start_serdes() failed, ret = %d\n",
+ __func__, ret);
+ goto out;
+ }
+
+ ret = ufs_qcom_phy_is_pcs_ready(phy);
+ if (ret)
+ dev_err(hba->dev, "%s: is_physical_coding_sublayer_ready() failed, ret = %d\n",
+ __func__, ret);
+
+out:
+ return ret;
+}
+
+/*
+ * The UTP controller has a number of internal clock gating cells (CGCs).
+ * Internal hardware sub-modules within the UTP controller control the CGCs.
+ * Hardware CGCs disable the clock to inactivate UTP sub-modules not involved
+ * in a specific operation, UTP controller CGCs are by default disabled and
+ * this function enables them (after every UFS link startup) to save some power
+ * leakage.
+ */
+static void ufs_qcom_enable_hw_clk_gating(struct ufs_hba *hba)
+{
+ ufshcd_writel(hba,
+ ufshcd_readl(hba, REG_UFS_CFG2) | REG_UFS_CFG2_CGC_EN_ALL,
+ REG_UFS_CFG2);
+
+ /* Ensure that HW clock gating is enabled before next operations */
+ mb();
+}
+
+static int ufs_qcom_hce_enable_notify(struct ufs_hba *hba, bool status)
+{
+ struct ufs_qcom_host *host = hba->priv;
+ int err = 0;
+
+ switch (status) {
+ case PRE_CHANGE:
+ ufs_qcom_power_up_sequence(hba);
+ /*
+ * The PHY PLL output is the source of tx/rx lane symbol
+ * clocks, hence, enable the lane clocks only after PHY
+ * is initialized.
+ */
+ err = ufs_qcom_enable_lane_clks(host);
+ break;
+ case POST_CHANGE:
+ /* check if UFS PHY moved from DISABLED to HIBERN8 */
+ err = ufs_qcom_check_hibern8(hba);
+ ufs_qcom_enable_hw_clk_gating(hba);
+
+ break;
+ default:
+ dev_err(hba->dev, "%s: invalid status %d\n", __func__, status);
+ err = -EINVAL;
+ break;
+ }
+ return err;
+}
+
+/**
+ * Returns non-zero for success (which rate of core_clk) and 0
+ * in case of a failure
+ */
+static unsigned long
+ufs_qcom_cfg_timers(struct ufs_hba *hba, u32 gear, u32 hs, u32 rate)
+{
+ struct ufs_clk_info *clki;
+ u32 core_clk_period_in_ns;
+ u32 tx_clk_cycles_per_us = 0;
+ unsigned long core_clk_rate = 0;
+ u32 core_clk_cycles_per_us = 0;
+
+ static u32 pwm_fr_table[][2] = {
+ {UFS_PWM_G1, 0x1},
+ {UFS_PWM_G2, 0x1},
+ {UFS_PWM_G3, 0x1},
+ {UFS_PWM_G4, 0x1},
+ };
+
+ static u32 hs_fr_table_rA[][2] = {
+ {UFS_HS_G1, 0x1F},
+ {UFS_HS_G2, 0x3e},
+ };
+
+ static u32 hs_fr_table_rB[][2] = {
+ {UFS_HS_G1, 0x24},
+ {UFS_HS_G2, 0x49},
+ };
+
+ if (gear == 0) {
+ dev_err(hba->dev, "%s: invalid gear = %d\n", __func__, gear);
+ goto out_error;
+ }
+
+ list_for_each_entry(clki, &hba->clk_list_head, list) {
+ if (!strcmp(clki->name, "core_clk"))
+ core_clk_rate = clk_get_rate(clki->clk);
+ }
+
+ /* If frequency is smaller than 1MHz, set to 1MHz */
+ if (core_clk_rate < DEFAULT_CLK_RATE_HZ)
+ core_clk_rate = DEFAULT_CLK_RATE_HZ;
+
+ core_clk_cycles_per_us = core_clk_rate / USEC_PER_SEC;
+ ufshcd_writel(hba, core_clk_cycles_per_us, REG_UFS_SYS1CLK_1US);
+
+ core_clk_period_in_ns = NSEC_PER_SEC / core_clk_rate;
+ core_clk_period_in_ns <<= OFFSET_CLK_NS_REG;
+ core_clk_period_in_ns &= MASK_CLK_NS_REG;
+
+ switch (hs) {
+ case FASTAUTO_MODE:
+ case FAST_MODE:
+ if (rate == PA_HS_MODE_A) {
+ if (gear > ARRAY_SIZE(hs_fr_table_rA)) {
+ dev_err(hba->dev,
+ "%s: index %d exceeds table size %zu\n",
+ __func__, gear,
+ ARRAY_SIZE(hs_fr_table_rA));
+ goto out_error;
+ }
+ tx_clk_cycles_per_us = hs_fr_table_rA[gear-1][1];
+ } else if (rate == PA_HS_MODE_B) {
+ if (gear > ARRAY_SIZE(hs_fr_table_rB)) {
+ dev_err(hba->dev,
+ "%s: index %d exceeds table size %zu\n",
+ __func__, gear,
+ ARRAY_SIZE(hs_fr_table_rB));
+ goto out_error;
+ }
+ tx_clk_cycles_per_us = hs_fr_table_rB[gear-1][1];
+ } else {
+ dev_err(hba->dev, "%s: invalid rate = %d\n",
+ __func__, rate);
+ goto out_error;
+ }
+ break;
+ case SLOWAUTO_MODE:
+ case SLOW_MODE:
+ if (gear > ARRAY_SIZE(pwm_fr_table)) {
+ dev_err(hba->dev,
+ "%s: index %d exceeds table size %zu\n",
+ __func__, gear,
+ ARRAY_SIZE(pwm_fr_table));
+ goto out_error;
+ }
+ tx_clk_cycles_per_us = pwm_fr_table[gear-1][1];
+ break;
+ case UNCHANGED:
+ default:
+ dev_err(hba->dev, "%s: invalid mode = %d\n", __func__, hs);
+ goto out_error;
+ }
+
+ /* this register 2 fields shall be written at once */
+ ufshcd_writel(hba, core_clk_period_in_ns | tx_clk_cycles_per_us,
+ REG_UFS_TX_SYMBOL_CLK_NS_US);
+ goto out;
+
+out_error:
+ core_clk_rate = 0;
+out:
+ return core_clk_rate;
+}
+
+static int ufs_qcom_link_startup_notify(struct ufs_hba *hba, bool status)
+{
+ unsigned long core_clk_rate = 0;
+ u32 core_clk_cycles_per_100ms;
+
+ switch (status) {
+ case PRE_CHANGE:
+ core_clk_rate = ufs_qcom_cfg_timers(hba, UFS_PWM_G1,
+ SLOWAUTO_MODE, 0);
+ if (!core_clk_rate) {
+ dev_err(hba->dev, "%s: ufs_qcom_cfg_timers() failed\n",
+ __func__);
+ return -EINVAL;
+ }
+ core_clk_cycles_per_100ms =
+ (core_clk_rate / MSEC_PER_SEC) * 100;
+ ufshcd_writel(hba, core_clk_cycles_per_100ms,
+ REG_UFS_PA_LINK_STARTUP_TIMER);
+ break;
+ case POST_CHANGE:
+ ufs_qcom_link_startup_post_change(hba);
+ break;
+ default:
+ break;
+ }
+
+ return 0;
+}
+
+static int ufs_qcom_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
+{
+ struct ufs_qcom_host *host = hba->priv;
+ struct phy *phy = host->generic_phy;
+ int ret = 0;
+
+ if (ufs_qcom_is_link_off(hba)) {
+ /*
+ * Disable the tx/rx lane symbol clocks before PHY is
+ * powered down as the PLL source should be disabled
+ * after downstream clocks are disabled.
+ */
+ ufs_qcom_disable_lane_clks(host);
+ phy_power_off(phy);
+
+ /* Assert PHY soft reset */
+ ufs_qcom_assert_reset(hba);
+ goto out;
+ }
+
+ /*
+ * If UniPro link is not active, PHY ref_clk, main PHY analog power
+ * rail and low noise analog power rail for PLL can be switched off.
+ */
+ if (!ufs_qcom_is_link_active(hba))
+ phy_power_off(phy);
+
+out:
+ return ret;
+}
+
+static int ufs_qcom_resume(struct ufs_hba *hba, enum ufs_pm_op pm_op)
+{
+ struct ufs_qcom_host *host = hba->priv;
+ struct phy *phy = host->generic_phy;
+ int err;
+
+ err = phy_power_on(phy);
+ if (err) {
+ dev_err(hba->dev, "%s: failed enabling regs, err = %d\n",
+ __func__, err);
+ goto out;
+ }
+
+ hba->is_sys_suspended = false;
+
+out:
+ return err;
+}
+
+struct ufs_qcom_dev_params {
+ u32 pwm_rx_gear; /* pwm rx gear to work in */
+ u32 pwm_tx_gear; /* pwm tx gear to work in */
+ u32 hs_rx_gear; /* hs rx gear to work in */
+ u32 hs_tx_gear; /* hs tx gear to work in */
+ u32 rx_lanes; /* number of rx lanes */
+ u32 tx_lanes; /* number of tx lanes */
+ u32 rx_pwr_pwm; /* rx pwm working pwr */
+ u32 tx_pwr_pwm; /* tx pwm working pwr */
+ u32 rx_pwr_hs; /* rx hs working pwr */
+ u32 tx_pwr_hs; /* tx hs working pwr */
+ u32 hs_rate; /* rate A/B to work in HS */
+ u32 desired_working_mode;
+};
+
+static int ufs_qcom_get_pwr_dev_param(struct ufs_qcom_dev_params *qcom_param,
+ struct ufs_pa_layer_attr *dev_max,
+ struct ufs_pa_layer_attr *agreed_pwr)
+{
+ int min_qcom_gear;
+ int min_dev_gear;
+ bool is_dev_sup_hs = false;
+ bool is_qcom_max_hs = false;
+
+ if (dev_max->pwr_rx == FAST_MODE)
+ is_dev_sup_hs = true;
+
+ if (qcom_param->desired_working_mode == FAST) {
+ is_qcom_max_hs = true;
+ min_qcom_gear = min_t(u32, qcom_param->hs_rx_gear,
+ qcom_param->hs_tx_gear);
+ } else {
+ min_qcom_gear = min_t(u32, qcom_param->pwm_rx_gear,
+ qcom_param->pwm_tx_gear);
+ }
+
+ /*
+ * device doesn't support HS but qcom_param->desired_working_mode is
+ * HS, thus device and qcom_param don't agree
+ */
+ if (!is_dev_sup_hs && is_qcom_max_hs) {
+ pr_err("%s: failed to agree on power mode (device doesn't support HS but requested power is HS)\n",
+ __func__);
+ return -ENOTSUPP;
+ } else if (is_dev_sup_hs && is_qcom_max_hs) {
+ /*
+ * since device supports HS, it supports FAST_MODE.
+ * since qcom_param->desired_working_mode is also HS
+ * then final decision (FAST/FASTAUTO) is done according
+ * to qcom_params as it is the restricting factor
+ */
+ agreed_pwr->pwr_rx = agreed_pwr->pwr_tx =
+ qcom_param->rx_pwr_hs;
+ } else {
+ /*
+ * here qcom_param->desired_working_mode is PWM.
+ * it doesn't matter whether device supports HS or PWM,
+ * in both cases qcom_param->desired_working_mode will
+ * determine the mode
+ */
+ agreed_pwr->pwr_rx = agreed_pwr->pwr_tx =
+ qcom_param->rx_pwr_pwm;
+ }
+
+ /*
+ * we would like tx to work in the minimum number of lanes
+ * between device capability and vendor preferences.
+ * the same decision will be made for rx
+ */
+ agreed_pwr->lane_tx = min_t(u32, dev_max->lane_tx,
+ qcom_param->tx_lanes);
+ agreed_pwr->lane_rx = min_t(u32, dev_max->lane_rx,
+ qcom_param->rx_lanes);
+
+ /* device maximum gear is the minimum between device rx and tx gears */
+ min_dev_gear = min_t(u32, dev_max->gear_rx, dev_max->gear_tx);
+
+ /*
+ * if both device capabilities and vendor pre-defined preferences are
+ * both HS or both PWM then set the minimum gear to be the chosen
+ * working gear.
+ * if one is PWM and one is HS then the one that is PWM get to decide
+ * what is the gear, as it is the one that also decided previously what
+ * pwr the device will be configured to.
+ */
+ if ((is_dev_sup_hs && is_qcom_max_hs) ||
+ (!is_dev_sup_hs && !is_qcom_max_hs))
+ agreed_pwr->gear_rx = agreed_pwr->gear_tx =
+ min_t(u32, min_dev_gear, min_qcom_gear);
+ else if (!is_dev_sup_hs)
+ agreed_pwr->gear_rx = agreed_pwr->gear_tx = min_dev_gear;
+ else
+ agreed_pwr->gear_rx = agreed_pwr->gear_tx = min_qcom_gear;
+
+ agreed_pwr->hs_rate = qcom_param->hs_rate;
+ return 0;
+}
+
+static int ufs_qcom_update_bus_bw_vote(struct ufs_qcom_host *host)
+{
+ int vote;
+ int err = 0;
+ char mode[BUS_VECTOR_NAME_LEN];
+
+ ufs_qcom_get_speed_mode(&host->dev_req_params, mode);
+
+ vote = ufs_qcom_get_bus_vote(host, mode);
+ if (vote >= 0)
+ err = ufs_qcom_set_bus_vote(host, vote);
+ else
+ err = vote;
+
+ if (err)
+ dev_err(host->hba->dev, "%s: failed %d\n", __func__, err);
+ else
+ host->bus_vote.saved_vote = vote;
+ return err;
+}
+
+static int ufs_qcom_pwr_change_notify(struct ufs_hba *hba,
+ bool status,
+ struct ufs_pa_layer_attr *dev_max_params,
+ struct ufs_pa_layer_attr *dev_req_params)
+{
+ u32 val;
+ struct ufs_qcom_host *host = hba->priv;
+ struct phy *phy = host->generic_phy;
+ struct ufs_qcom_dev_params ufs_qcom_cap;
+ int ret = 0;
+ int res = 0;
+
+ if (!dev_req_params) {
+ pr_err("%s: incoming dev_req_params is NULL\n", __func__);
+ ret = -EINVAL;
+ goto out;
+ }
+
+ switch (status) {
+ case PRE_CHANGE:
+ ufs_qcom_cap.tx_lanes = UFS_QCOM_LIMIT_NUM_LANES_TX;
+ ufs_qcom_cap.rx_lanes = UFS_QCOM_LIMIT_NUM_LANES_RX;
+ ufs_qcom_cap.hs_rx_gear = UFS_QCOM_LIMIT_HSGEAR_RX;
+ ufs_qcom_cap.hs_tx_gear = UFS_QCOM_LIMIT_HSGEAR_TX;
+ ufs_qcom_cap.pwm_rx_gear = UFS_QCOM_LIMIT_PWMGEAR_RX;
+ ufs_qcom_cap.pwm_tx_gear = UFS_QCOM_LIMIT_PWMGEAR_TX;
+ ufs_qcom_cap.rx_pwr_pwm = UFS_QCOM_LIMIT_RX_PWR_PWM;
+ ufs_qcom_cap.tx_pwr_pwm = UFS_QCOM_LIMIT_TX_PWR_PWM;
+ ufs_qcom_cap.rx_pwr_hs = UFS_QCOM_LIMIT_RX_PWR_HS;
+ ufs_qcom_cap.tx_pwr_hs = UFS_QCOM_LIMIT_TX_PWR_HS;
+ ufs_qcom_cap.hs_rate = UFS_QCOM_LIMIT_HS_RATE;
+ ufs_qcom_cap.desired_working_mode =
+ UFS_QCOM_LIMIT_DESIRED_MODE;
+
+ ret = ufs_qcom_get_pwr_dev_param(&ufs_qcom_cap,
+ dev_max_params,
+ dev_req_params);
+ if (ret) {
+ pr_err("%s: failed to determine capabilities\n",
+ __func__);
+ goto out;
+ }
+
+ break;
+ case POST_CHANGE:
+ if (!ufs_qcom_cfg_timers(hba, dev_req_params->gear_rx,
+ dev_req_params->pwr_rx,
+ dev_req_params->hs_rate)) {
+ dev_err(hba->dev, "%s: ufs_qcom_cfg_timers() failed\n",
+ __func__);
+ /*
+ * we return error code at the end of the routine,
+ * but continue to configure UFS_PHY_TX_LANE_ENABLE
+ * and bus voting as usual
+ */
+ ret = -EINVAL;
+ }
+
+ val = ~(MAX_U32 << dev_req_params->lane_tx);
+ res = ufs_qcom_phy_set_tx_lane_enable(phy, val);
+ if (res) {
+ dev_err(hba->dev, "%s: ufs_qcom_phy_set_tx_lane_enable() failed res = %d\n",
+ __func__, res);
+ ret = res;
+ }
+
+ /* cache the power mode parameters to use internally */
+ memcpy(&host->dev_req_params,
+ dev_req_params, sizeof(*dev_req_params));
+ ufs_qcom_update_bus_bw_vote(host);
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+out:
+ return ret;
+}
+
+/**
+ * ufs_qcom_advertise_quirks - advertise the known QCOM UFS controller quirks
+ * @hba: host controller instance
+ *
+ * QCOM UFS host controller might have some non standard behaviours (quirks)
+ * than what is specified by UFSHCI specification. Advertise all such
+ * quirks to standard UFS host controller driver so standard takes them into
+ * account.
+ */
+static void ufs_qcom_advertise_quirks(struct ufs_hba *hba)
+{
+ u8 major;
+ u16 minor, step;
+
+ ufs_qcom_get_controller_revision(hba, &major, &minor, &step);
+
+ /*
+ * TBD
+ * here we should be advertising controller quirks according to
+ * controller version.
+ */
+}
+
+static int ufs_qcom_get_bus_vote(struct ufs_qcom_host *host,
+ const char *speed_mode)
+{
+ struct device *dev = host->hba->dev;
+ struct device_node *np = dev->of_node;
+ int err;
+ const char *key = "qcom,bus-vector-names";
+
+ if (!speed_mode) {
+ err = -EINVAL;
+ goto out;
+ }
+
+ if (host->bus_vote.is_max_bw_needed && !!strcmp(speed_mode, "MIN"))
+ err = of_property_match_string(np, key, "MAX");
+ else
+ err = of_property_match_string(np, key, speed_mode);
+
+out:
+ if (err < 0)
+ dev_err(dev, "%s: Invalid %s mode %d\n",
+ __func__, speed_mode, err);
+ return err;
+}
+
+static int ufs_qcom_set_bus_vote(struct ufs_qcom_host *host, int vote)
+{
+ int err = 0;
+
+ if (vote != host->bus_vote.curr_vote)
+ host->bus_vote.curr_vote = vote;
+
+ return err;
+}
+
+static void ufs_qcom_get_speed_mode(struct ufs_pa_layer_attr *p, char *result)
+{
+ int gear = max_t(u32, p->gear_rx, p->gear_tx);
+ int lanes = max_t(u32, p->lane_rx, p->lane_tx);
+ int pwr;
+
+ /* default to PWM Gear 1, Lane 1 if power mode is not initialized */
+ if (!gear)
+ gear = 1;
+
+ if (!lanes)
+ lanes = 1;
+
+ if (!p->pwr_rx && !p->pwr_tx) {
+ pwr = SLOWAUTO_MODE;
+ snprintf(result, BUS_VECTOR_NAME_LEN, "MIN");
+ } else if (p->pwr_rx == FAST_MODE || p->pwr_rx == FASTAUTO_MODE ||
+ p->pwr_tx == FAST_MODE || p->pwr_tx == FASTAUTO_MODE) {
+ pwr = FAST_MODE;
+ snprintf(result, BUS_VECTOR_NAME_LEN, "%s_R%s_G%d_L%d", "HS",
+ p->hs_rate == PA_HS_MODE_B ? "B" : "A", gear, lanes);
+ } else {
+ pwr = SLOW_MODE;
+ snprintf(result, BUS_VECTOR_NAME_LEN, "%s_G%d_L%d",
+ "PWM", gear, lanes);
+ }
+}
+
+static int ufs_qcom_setup_clocks(struct ufs_hba *hba, bool on)
+{
+ struct ufs_qcom_host *host = hba->priv;
+ int err = 0;
+ int vote = 0;
+
+ /*
+ * In case ufs_qcom_init() is not yet done, simply ignore.
+ * This ufs_qcom_setup_clocks() shall be called from
+ * ufs_qcom_init() after init is done.
+ */
+ if (!host)
+ return 0;
+
+ if (on) {
+ err = ufs_qcom_phy_enable_iface_clk(host->generic_phy);
+ if (err)
+ goto out;
+
+ err = ufs_qcom_phy_enable_ref_clk(host->generic_phy);
+ if (err) {
+ dev_err(hba->dev, "%s enable phy ref clock failed, err=%d\n",
+ __func__, err);
+ ufs_qcom_phy_disable_iface_clk(host->generic_phy);
+ goto out;
+ }
+ /* enable the device ref clock */
+ ufs_qcom_phy_enable_dev_ref_clk(host->generic_phy);
+ vote = host->bus_vote.saved_vote;
+ if (vote == host->bus_vote.min_bw_vote)
+ ufs_qcom_update_bus_bw_vote(host);
+ } else {
+ /* M-PHY RMMI interface clocks can be turned off */
+ ufs_qcom_phy_disable_iface_clk(host->generic_phy);
+ if (!ufs_qcom_is_link_active(hba)) {
+ /* turn off UFS local PHY ref_clk */
+ ufs_qcom_phy_disable_ref_clk(host->generic_phy);
+ /* disable device ref_clk */
+ ufs_qcom_phy_disable_dev_ref_clk(host->generic_phy);
+ }
+ vote = host->bus_vote.min_bw_vote;
+ }
+
+ err = ufs_qcom_set_bus_vote(host, vote);
+ if (err)
+ dev_err(hba->dev, "%s: set bus vote failed %d\n",
+ __func__, err);
+
+out:
+ return err;
+}
+
+static ssize_t
+show_ufs_to_mem_max_bus_bw(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct ufs_hba *hba = dev_get_drvdata(dev);
+ struct ufs_qcom_host *host = hba->priv;
+
+ return snprintf(buf, PAGE_SIZE, "%u\n",
+ host->bus_vote.is_max_bw_needed);
+}
+
+static ssize_t
+store_ufs_to_mem_max_bus_bw(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct ufs_hba *hba = dev_get_drvdata(dev);
+ struct ufs_qcom_host *host = hba->priv;
+ uint32_t value;
+
+ if (!kstrtou32(buf, 0, &value)) {
+ host->bus_vote.is_max_bw_needed = !!value;
+ ufs_qcom_update_bus_bw_vote(host);
+ }
+
+ return count;
+}
+
+static int ufs_qcom_bus_register(struct ufs_qcom_host *host)
+{
+ int err;
+ struct device *dev = host->hba->dev;
+ struct device_node *np = dev->of_node;
+
+ err = of_property_count_strings(np, "qcom,bus-vector-names");
+ if (err < 0 ) {
+ dev_err(dev, "%s: qcom,bus-vector-names not specified correctly %d\n",
+ __func__, err);
+ goto out;
+ }
+
+ /* cache the vote index for minimum and maximum bandwidth */
+ host->bus_vote.min_bw_vote = ufs_qcom_get_bus_vote(host, "MIN");
+ host->bus_vote.max_bw_vote = ufs_qcom_get_bus_vote(host, "MAX");
+
+ host->bus_vote.max_bus_bw.show = show_ufs_to_mem_max_bus_bw;
+ host->bus_vote.max_bus_bw.store = store_ufs_to_mem_max_bus_bw;
+ sysfs_attr_init(&host->bus_vote.max_bus_bw.attr);
+ host->bus_vote.max_bus_bw.attr.name = "max_bus_bw";
+ host->bus_vote.max_bus_bw.attr.mode = S_IRUGO | S_IWUSR;
+ err = device_create_file(dev, &host->bus_vote.max_bus_bw);
+out:
+ return err;
+}
+
+#define ANDROID_BOOT_DEV_MAX 30
+static char android_boot_dev[ANDROID_BOOT_DEV_MAX];
+static int get_android_boot_dev(char *str)
+{
+ strlcpy(android_boot_dev, str, ANDROID_BOOT_DEV_MAX);
+ return 1;
+}
+__setup("androidboot.bootdevice=", get_android_boot_dev);
+
+/**
+ * ufs_qcom_init - bind phy with controller
+ * @hba: host controller instance
+ *
+ * Binds PHY with controller and powers up PHY enabling clocks
+ * and regulators.
+ *
+ * Returns -EPROBE_DEFER if binding fails, returns negative error
+ * on phy power up failure and returns zero on success.
+ */
+static int ufs_qcom_init(struct ufs_hba *hba)
+{
+ int err;
+ struct device *dev = hba->dev;
+ struct ufs_qcom_host *host;
+
+ if (strlen(android_boot_dev) && strcmp(android_boot_dev, dev_name(dev)))
+ return -ENODEV;
+
+ host = devm_kzalloc(dev, sizeof(*host), GFP_KERNEL);
+ if (!host) {
+ err = -ENOMEM;
+ dev_err(dev, "%s: no memory for qcom ufs host\n", __func__);
+ goto out;
+ }
+
+ host->hba = hba;
+ hba->priv = (void *)host;
+
+ host->generic_phy = devm_phy_get(dev, "ufsphy");
+
+ if (IS_ERR(host->generic_phy)) {
+ err = PTR_ERR(host->generic_phy);
+ dev_err(dev, "%s: PHY get failed %d\n", __func__, err);
+ goto out;
+ }
+
+ err = ufs_qcom_bus_register(host);
+ if (err)
+ goto out_host_free;
+
+ phy_init(host->generic_phy);
+ err = phy_power_on(host->generic_phy);
+ if (err)
+ goto out_unregister_bus;
+
+ err = ufs_qcom_init_lane_clks(host);
+ if (err)
+ goto out_disable_phy;
+
+ ufs_qcom_advertise_quirks(hba);
+
+ hba->caps |= UFSHCD_CAP_CLK_GATING | UFSHCD_CAP_CLK_SCALING;
+ hba->caps |= UFSHCD_CAP_AUTO_BKOPS_SUSPEND;
+
+ ufs_qcom_setup_clocks(hba, true);
+
+ if (hba->dev->id < MAX_UFS_QCOM_HOSTS)
+ ufs_qcom_hosts[hba->dev->id] = host;
+
+ goto out;
+
+out_disable_phy:
+ phy_power_off(host->generic_phy);
+out_unregister_bus:
+ phy_exit(host->generic_phy);
+out_host_free:
+ devm_kfree(dev, host);
+ hba->priv = NULL;
+out:
+ return err;
+}
+
+static void ufs_qcom_exit(struct ufs_hba *hba)
+{
+ struct ufs_qcom_host *host = hba->priv;
+
+ ufs_qcom_disable_lane_clks(host);
+ phy_power_off(host->generic_phy);
+}
+
+static
+void ufs_qcom_clk_scale_notify(struct ufs_hba *hba)
+{
+ struct ufs_qcom_host *host = hba->priv;
+ struct ufs_pa_layer_attr *dev_req_params = &host->dev_req_params;
+
+ if (!dev_req_params)
+ return;
+
+ ufs_qcom_cfg_timers(hba, dev_req_params->gear_rx,
+ dev_req_params->pwr_rx,
+ dev_req_params->hs_rate);
+}
+
+/**
+ * struct ufs_hba_qcom_vops - UFS QCOM specific variant operations
+ *
+ * The variant operations configure the necessary controller and PHY
+ * handshake during initialization.
+ */
+static const struct ufs_hba_variant_ops ufs_hba_qcom_vops = {
+ .name = "qcom",
+ .init = ufs_qcom_init,
+ .exit = ufs_qcom_exit,
+ .clk_scale_notify = ufs_qcom_clk_scale_notify,
+ .setup_clocks = ufs_qcom_setup_clocks,
+ .hce_enable_notify = ufs_qcom_hce_enable_notify,
+ .link_startup_notify = ufs_qcom_link_startup_notify,
+ .pwr_change_notify = ufs_qcom_pwr_change_notify,
+ .suspend = ufs_qcom_suspend,
+ .resume = ufs_qcom_resume,
+};
+EXPORT_SYMBOL(ufs_hba_qcom_vops);
diff --git a/drivers/scsi/ufs/ufs-qcom.h b/drivers/scsi/ufs/ufs-qcom.h
new file mode 100644
index 000000000000..9a6febd007df
--- /dev/null
+++ b/drivers/scsi/ufs/ufs-qcom.h
@@ -0,0 +1,170 @@
+/* Copyright (c) 2013-2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef UFS_QCOM_H_
+#define UFS_QCOM_H_
+
+#define MAX_UFS_QCOM_HOSTS 1
+#define MAX_U32 (~(u32)0)
+#define MPHY_TX_FSM_STATE 0x41
+#define TX_FSM_HIBERN8 0x1
+#define HBRN8_POLL_TOUT_MS 100
+#define DEFAULT_CLK_RATE_HZ 1000000
+#define BUS_VECTOR_NAME_LEN 32
+
+#define UFS_HW_VER_MAJOR_SHFT (28)
+#define UFS_HW_VER_MAJOR_MASK (0x000F << UFS_HW_VER_MAJOR_SHFT)
+#define UFS_HW_VER_MINOR_SHFT (16)
+#define UFS_HW_VER_MINOR_MASK (0x0FFF << UFS_HW_VER_MINOR_SHFT)
+#define UFS_HW_VER_STEP_SHFT (0)
+#define UFS_HW_VER_STEP_MASK (0xFFFF << UFS_HW_VER_STEP_SHFT)
+
+/* vendor specific pre-defined parameters */
+#define SLOW 1
+#define FAST 2
+
+#define UFS_QCOM_LIMIT_NUM_LANES_RX 2
+#define UFS_QCOM_LIMIT_NUM_LANES_TX 2
+#define UFS_QCOM_LIMIT_HSGEAR_RX UFS_HS_G2
+#define UFS_QCOM_LIMIT_HSGEAR_TX UFS_HS_G2
+#define UFS_QCOM_LIMIT_PWMGEAR_RX UFS_PWM_G4
+#define UFS_QCOM_LIMIT_PWMGEAR_TX UFS_PWM_G4
+#define UFS_QCOM_LIMIT_RX_PWR_PWM SLOW_MODE
+#define UFS_QCOM_LIMIT_TX_PWR_PWM SLOW_MODE
+#define UFS_QCOM_LIMIT_RX_PWR_HS FAST_MODE
+#define UFS_QCOM_LIMIT_TX_PWR_HS FAST_MODE
+#define UFS_QCOM_LIMIT_HS_RATE PA_HS_MODE_B
+#define UFS_QCOM_LIMIT_DESIRED_MODE FAST
+
+/* QCOM UFS host controller vendor specific registers */
+enum {
+ REG_UFS_SYS1CLK_1US = 0xC0,
+ REG_UFS_TX_SYMBOL_CLK_NS_US = 0xC4,
+ REG_UFS_LOCAL_PORT_ID_REG = 0xC8,
+ REG_UFS_PA_ERR_CODE = 0xCC,
+ REG_UFS_RETRY_TIMER_REG = 0xD0,
+ REG_UFS_PA_LINK_STARTUP_TIMER = 0xD8,
+ REG_UFS_CFG1 = 0xDC,
+ REG_UFS_CFG2 = 0xE0,
+ REG_UFS_HW_VERSION = 0xE4,
+
+ UFS_DBG_RD_REG_UAWM = 0x100,
+ UFS_DBG_RD_REG_UARM = 0x200,
+ UFS_DBG_RD_REG_TXUC = 0x300,
+ UFS_DBG_RD_REG_RXUC = 0x400,
+ UFS_DBG_RD_REG_DFC = 0x500,
+ UFS_DBG_RD_REG_TRLUT = 0x600,
+ UFS_DBG_RD_REG_TMRLUT = 0x700,
+ UFS_UFS_DBG_RD_REG_OCSC = 0x800,
+
+ UFS_UFS_DBG_RD_DESC_RAM = 0x1500,
+ UFS_UFS_DBG_RD_PRDT_RAM = 0x1700,
+ UFS_UFS_DBG_RD_RESP_RAM = 0x1800,
+ UFS_UFS_DBG_RD_EDTL_RAM = 0x1900,
+};
+
+/* bit definitions for REG_UFS_CFG2 register */
+#define UAWM_HW_CGC_EN (1 << 0)
+#define UARM_HW_CGC_EN (1 << 1)
+#define TXUC_HW_CGC_EN (1 << 2)
+#define RXUC_HW_CGC_EN (1 << 3)
+#define DFC_HW_CGC_EN (1 << 4)
+#define TRLUT_HW_CGC_EN (1 << 5)
+#define TMRLUT_HW_CGC_EN (1 << 6)
+#define OCSC_HW_CGC_EN (1 << 7)
+
+#define REG_UFS_CFG2_CGC_EN_ALL (UAWM_HW_CGC_EN | UARM_HW_CGC_EN |\
+ TXUC_HW_CGC_EN | RXUC_HW_CGC_EN |\
+ DFC_HW_CGC_EN | TRLUT_HW_CGC_EN |\
+ TMRLUT_HW_CGC_EN | OCSC_HW_CGC_EN)
+
+/* bit offset */
+enum {
+ OFFSET_UFS_PHY_SOFT_RESET = 1,
+ OFFSET_CLK_NS_REG = 10,
+};
+
+/* bit masks */
+enum {
+ MASK_UFS_PHY_SOFT_RESET = 0x2,
+ MASK_TX_SYMBOL_CLK_1US_REG = 0x3FF,
+ MASK_CLK_NS_REG = 0xFFFC00,
+};
+
+enum ufs_qcom_phy_init_type {
+ UFS_PHY_INIT_FULL,
+ UFS_PHY_INIT_CFG_RESTORE,
+};
+
+static inline void
+ufs_qcom_get_controller_revision(struct ufs_hba *hba,
+ u8 *major, u16 *minor, u16 *step)
+{
+ u32 ver = ufshcd_readl(hba, REG_UFS_HW_VERSION);
+
+ *major = (ver & UFS_HW_VER_MAJOR_MASK) >> UFS_HW_VER_MAJOR_SHFT;
+ *minor = (ver & UFS_HW_VER_MINOR_MASK) >> UFS_HW_VER_MINOR_SHFT;
+ *step = (ver & UFS_HW_VER_STEP_MASK) >> UFS_HW_VER_STEP_SHFT;
+};
+
+static inline void ufs_qcom_assert_reset(struct ufs_hba *hba)
+{
+ ufshcd_rmwl(hba, MASK_UFS_PHY_SOFT_RESET,
+ 1 << OFFSET_UFS_PHY_SOFT_RESET, REG_UFS_CFG1);
+
+ /*
+ * Make sure assertion of ufs phy reset is written to
+ * register before returning
+ */
+ mb();
+}
+
+static inline void ufs_qcom_deassert_reset(struct ufs_hba *hba)
+{
+ ufshcd_rmwl(hba, MASK_UFS_PHY_SOFT_RESET,
+ 0 << OFFSET_UFS_PHY_SOFT_RESET, REG_UFS_CFG1);
+
+ /*
+ * Make sure de-assertion of ufs phy reset is written to
+ * register before returning
+ */
+ mb();
+}
+
+struct ufs_qcom_bus_vote {
+ uint32_t client_handle;
+ uint32_t curr_vote;
+ int min_bw_vote;
+ int max_bw_vote;
+ int saved_vote;
+ bool is_max_bw_needed;
+ struct device_attribute max_bus_bw;
+};
+
+struct ufs_qcom_host {
+ struct phy *generic_phy;
+ struct ufs_hba *hba;
+ struct ufs_qcom_bus_vote bus_vote;
+ struct ufs_pa_layer_attr dev_req_params;
+ struct clk *rx_l0_sync_clk;
+ struct clk *tx_l0_sync_clk;
+ struct clk *rx_l1_sync_clk;
+ struct clk *tx_l1_sync_clk;
+ bool is_lane_clks_enabled;
+};
+
+#define ufs_qcom_is_link_off(hba) ufshcd_is_link_off(hba)
+#define ufs_qcom_is_link_active(hba) ufshcd_is_link_active(hba)
+#define ufs_qcom_is_link_hibern8(hba) ufshcd_is_link_hibern8(hba)
+
+#endif /* UFS_QCOM_H_ */
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 2e4614b9dddf..5d60a868830d 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -4714,10 +4714,8 @@ static int ufshcd_set_dev_pwr_mode(struct ufs_hba *hba,
sdev_printk(KERN_WARNING, sdp,
"START_STOP failed for power mode: %d, result %x\n",
pwr_mode, ret);
- if (driver_byte(ret) & DRIVER_SENSE) {
- scsi_show_sense_hdr(sdp, NULL, &sshdr);
- scsi_show_extd_sense(sdp, NULL, sshdr.asc, sshdr.ascq);
- }
+ if (driver_byte(ret) & DRIVER_SENSE)
+ scsi_print_sense_hdr(sdp, NULL, &sshdr);
}
if (!ret)
diff --git a/drivers/scsi/wd33c93.c b/drivers/scsi/wd33c93.c
index c0506de4f3b6..9e09da412b92 100644
--- a/drivers/scsi/wd33c93.c
+++ b/drivers/scsi/wd33c93.c
@@ -2143,22 +2143,22 @@ wd33c93_show_info(struct seq_file *m, struct Scsi_Host *instance)
seq_printf(m, "\nclock_freq=%02x no_sync=%02x no_dma=%d"
" dma_mode=%02x fast=%d",
hd->clock_freq, hd->no_sync, hd->no_dma, hd->dma_mode, hd->fast);
- seq_printf(m, "\nsync_xfer[] = ");
+ seq_puts(m, "\nsync_xfer[] = ");
for (x = 0; x < 7; x++)
seq_printf(m, "\t%02x", hd->sync_xfer[x]);
- seq_printf(m, "\nsync_stat[] = ");
+ seq_puts(m, "\nsync_stat[] = ");
for (x = 0; x < 7; x++)
seq_printf(m, "\t%02x", hd->sync_stat[x]);
}
#ifdef PROC_STATISTICS
if (hd->proc & PR_STATISTICS) {
- seq_printf(m, "\ncommands issued: ");
+ seq_puts(m, "\ncommands issued: ");
for (x = 0; x < 7; x++)
seq_printf(m, "\t%ld", hd->cmd_cnt[x]);
- seq_printf(m, "\ndisconnects allowed:");
+ seq_puts(m, "\ndisconnects allowed:");
for (x = 0; x < 7; x++)
seq_printf(m, "\t%ld", hd->disc_allowed_cnt[x]);
- seq_printf(m, "\ndisconnects done: ");
+ seq_puts(m, "\ndisconnects done: ");
for (x = 0; x < 7; x++)
seq_printf(m, "\t%ld", hd->disc_done_cnt[x]);
seq_printf(m,
@@ -2167,7 +2167,7 @@ wd33c93_show_info(struct seq_file *m, struct Scsi_Host *instance)
}
#endif
if (hd->proc & PR_CONNECTED) {
- seq_printf(m, "\nconnected: ");
+ seq_puts(m, "\nconnected: ");
if (hd->connected) {
cmd = (struct scsi_cmnd *) hd->connected;
seq_printf(m, " %d:%llu(%02x)",
@@ -2175,7 +2175,7 @@ wd33c93_show_info(struct seq_file *m, struct Scsi_Host *instance)
}
}
if (hd->proc & PR_INPUTQ) {
- seq_printf(m, "\ninput_Q: ");
+ seq_puts(m, "\ninput_Q: ");
cmd = (struct scsi_cmnd *) hd->input_Q;
while (cmd) {
seq_printf(m, " %d:%llu(%02x)",
@@ -2184,7 +2184,7 @@ wd33c93_show_info(struct seq_file *m, struct Scsi_Host *instance)
}
}
if (hd->proc & PR_DISCQ) {
- seq_printf(m, "\ndisconnected_Q:");
+ seq_puts(m, "\ndisconnected_Q:");
cmd = (struct scsi_cmnd *) hd->disconnected_Q;
while (cmd) {
seq_printf(m, " %d:%llu(%02x)",
@@ -2192,7 +2192,7 @@ wd33c93_show_info(struct seq_file *m, struct Scsi_Host *instance)
cmd = (struct scsi_cmnd *) cmd->host_scribble;
}
}
- seq_printf(m, "\n");
+ seq_putc(m, '\n');
spin_unlock_irq(&hd->lock);
#endif /* PROC_INTERFACE */
return 0;
diff --git a/drivers/scsi/wd7000.c b/drivers/scsi/wd7000.c
index f94d73611ab4..0c0f17b9a3eb 100644
--- a/drivers/scsi/wd7000.c
+++ b/drivers/scsi/wd7000.c
@@ -1295,9 +1295,6 @@ static void wd7000_revision(Adapter * host)
}
-#undef SPRINTF
-#define SPRINTF(args...) { seq_printf(m, ## args); }
-
static int wd7000_set_info(struct Scsi_Host *host, char *buffer, int length)
{
dprintk("Buffer = <%.*s>, length = %d\n", length, buffer, length);
@@ -1320,43 +1317,43 @@ static int wd7000_show_info(struct seq_file *m, struct Scsi_Host *host)
#endif
spin_lock_irqsave(host->host_lock, flags);
- SPRINTF("Host scsi%d: Western Digital WD-7000 (rev %d.%d)\n", host->host_no, adapter->rev1, adapter->rev2);
- SPRINTF(" IO base: 0x%x\n", adapter->iobase);
- SPRINTF(" IRQ: %d\n", adapter->irq);
- SPRINTF(" DMA channel: %d\n", adapter->dma);
- SPRINTF(" Interrupts: %d\n", adapter->int_counter);
- SPRINTF(" BUS_ON time: %d nanoseconds\n", adapter->bus_on * 125);
- SPRINTF(" BUS_OFF time: %d nanoseconds\n", adapter->bus_off * 125);
+ seq_printf(m, "Host scsi%d: Western Digital WD-7000 (rev %d.%d)\n", host->host_no, adapter->rev1, adapter->rev2);
+ seq_printf(m, " IO base: 0x%x\n", adapter->iobase);
+ seq_printf(m, " IRQ: %d\n", adapter->irq);
+ seq_printf(m, " DMA channel: %d\n", adapter->dma);
+ seq_printf(m, " Interrupts: %d\n", adapter->int_counter);
+ seq_printf(m, " BUS_ON time: %d nanoseconds\n", adapter->bus_on * 125);
+ seq_printf(m, " BUS_OFF time: %d nanoseconds\n", adapter->bus_off * 125);
#ifdef WD7000_DEBUG
ogmbs = adapter->mb.ogmb;
icmbs = adapter->mb.icmb;
- SPRINTF("\nControl port value: 0x%x\n", adapter->control);
- SPRINTF("Incoming mailbox:\n");
- SPRINTF(" size: %d\n", ICMB_CNT);
- SPRINTF(" queued messages: ");
+ seq_printf(m, "\nControl port value: 0x%x\n", adapter->control);
+ seq_puts(m, "Incoming mailbox:\n");
+ seq_printf(m, " size: %d\n", ICMB_CNT);
+ seq_puts(m, " queued messages: ");
for (i = count = 0; i < ICMB_CNT; i++)
if (icmbs[i].status) {
count++;
- SPRINTF("0x%x ", i);
+ seq_printf(m, "0x%x ", i);
}
- SPRINTF(count ? "\n" : "none\n");
+ seq_puts(m, count ? "\n" : "none\n");
- SPRINTF("Outgoing mailbox:\n");
- SPRINTF(" size: %d\n", OGMB_CNT);
- SPRINTF(" next message: 0x%x\n", adapter->next_ogmb);
- SPRINTF(" queued messages: ");
+ seq_puts(m, "Outgoing mailbox:\n");
+ seq_printf(m, " size: %d\n", OGMB_CNT);
+ seq_printf(m, " next message: 0x%x\n", adapter->next_ogmb);
+ seq_puts(m, " queued messages: ");
for (i = count = 0; i < OGMB_CNT; i++)
if (ogmbs[i].status) {
count++;
- SPRINTF("0x%x ", i);
+ seq_printf(m, "0x%x ", i);
}
- SPRINTF(count ? "\n" : "none\n");
+ seq_puts(m, count ? "\n" : "none\n");
#endif
spin_unlock_irqrestore(host->host_lock, flags);
diff --git a/drivers/xen/xen-scsiback.c b/drivers/xen/xen-scsiback.c
index ecd540a7a562..61653a03a8f5 100644
--- a/drivers/xen/xen-scsiback.c
+++ b/drivers/xen/xen-scsiback.c
@@ -47,6 +47,7 @@
#include <generated/utsrelease.h>
+#include <scsi/scsi.h>
#include <scsi/scsi_dbg.h>
#include <scsi/scsi_eh.h>
#include <scsi/scsi_tcq.h>
diff --git a/include/linux/enclosure.h b/include/linux/enclosure.h
index 9a33c5f7e126..7be22da321f3 100644
--- a/include/linux/enclosure.h
+++ b/include/linux/enclosure.h
@@ -79,6 +79,12 @@ struct enclosure_component_callbacks {
int (*set_locate)(struct enclosure_device *,
struct enclosure_component *,
enum enclosure_component_setting);
+ void (*get_power_status)(struct enclosure_device *,
+ struct enclosure_component *);
+ int (*set_power_status)(struct enclosure_device *,
+ struct enclosure_component *,
+ int);
+ int (*show_id)(struct enclosure_device *, char *buf);
};
@@ -91,7 +97,9 @@ struct enclosure_component {
int fault;
int active;
int locate;
+ int slot;
enum enclosure_status status;
+ int power_status;
};
struct enclosure_device {
@@ -120,8 +128,9 @@ enclosure_register(struct device *, const char *, int,
struct enclosure_component_callbacks *);
void enclosure_unregister(struct enclosure_device *);
struct enclosure_component *
-enclosure_component_register(struct enclosure_device *, unsigned int,
- enum enclosure_component_type, const char *);
+enclosure_component_alloc(struct enclosure_device *, unsigned int,
+ enum enclosure_component_type, const char *);
+int enclosure_component_register(struct enclosure_component *);
int enclosure_add_device(struct enclosure_device *enclosure, int component,
struct device *dev);
int enclosure_remove_device(struct enclosure_device *, struct device *);
diff --git a/include/linux/phy/phy-qcom-ufs.h b/include/linux/phy/phy-qcom-ufs.h
new file mode 100644
index 000000000000..9d18e9f948e9
--- /dev/null
+++ b/include/linux/phy/phy-qcom-ufs.h
@@ -0,0 +1,59 @@
+/*
+ * Copyright (c) 2013-2015, Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef PHY_QCOM_UFS_H_
+#define PHY_QCOM_UFS_H_
+
+#include "phy.h"
+
+/**
+ * ufs_qcom_phy_enable_ref_clk() - Enable the phy
+ * ref clock.
+ * @phy: reference to a generic phy
+ *
+ * returns 0 for success, and non-zero for error.
+ */
+int ufs_qcom_phy_enable_ref_clk(struct phy *phy);
+
+/**
+ * ufs_qcom_phy_disable_ref_clk() - Disable the phy
+ * ref clock.
+ * @phy: reference to a generic phy.
+ */
+void ufs_qcom_phy_disable_ref_clk(struct phy *phy);
+
+/**
+ * ufs_qcom_phy_enable_dev_ref_clk() - Enable the device
+ * ref clock.
+ * @phy: reference to a generic phy.
+ */
+void ufs_qcom_phy_enable_dev_ref_clk(struct phy *phy);
+
+/**
+ * ufs_qcom_phy_disable_dev_ref_clk() - Disable the device
+ * ref clock.
+ * @phy: reference to a generic phy.
+ */
+void ufs_qcom_phy_disable_dev_ref_clk(struct phy *phy);
+
+int ufs_qcom_phy_enable_iface_clk(struct phy *phy);
+void ufs_qcom_phy_disable_iface_clk(struct phy *phy);
+int ufs_qcom_phy_start_serdes(struct phy *phy);
+int ufs_qcom_phy_set_tx_lane_enable(struct phy *phy, u32 tx_lanes);
+int ufs_qcom_phy_calibrate_phy(struct phy *phy, bool is_rate_B);
+int ufs_qcom_phy_is_pcs_ready(struct phy *phy);
+void ufs_qcom_phy_save_controller_version(struct phy *phy,
+ u8 major, u16 minor, u16 step);
+
+#endif /* PHY_QCOM_UFS_H_ */
diff --git a/include/scsi/scsi.h b/include/scsi/scsi.h
index 8a7f8ad58aac..d0a66aa1868d 100644
--- a/include/scsi/scsi.h
+++ b/include/scsi/scsi.h
@@ -195,6 +195,9 @@ enum scsi_timeouts {
#define ATA_16 0x85 /* 16-byte pass-thru */
#define ATA_12 0xa1 /* 12-byte pass-thru */
+/* Vendor specific CDBs start here */
+#define VENDOR_SPECIFIC_CDB 0xc0
+
/*
* SCSI command lengths
*/
diff --git a/include/scsi/scsi_dbg.h b/include/scsi/scsi_dbg.h
index 7982795df595..f8170e90b49d 100644
--- a/include/scsi/scsi_dbg.h
+++ b/include/scsi/scsi_dbg.h
@@ -5,8 +5,11 @@ struct scsi_cmnd;
struct scsi_device;
struct scsi_sense_hdr;
+#define SCSI_LOG_BUFSIZE 128
+
extern void scsi_print_command(struct scsi_cmnd *);
-extern void __scsi_print_command(const unsigned char *, size_t);
+extern size_t __scsi_format_command(char *, size_t,
+ const unsigned char *, size_t);
extern void scsi_show_extd_sense(const struct scsi_device *, const char *,
unsigned char, unsigned char);
extern void scsi_show_sense_hdr(const struct scsi_device *, const char *,
@@ -17,12 +20,73 @@ extern void scsi_print_sense(const struct scsi_cmnd *);
extern void __scsi_print_sense(const struct scsi_device *, const char *name,
const unsigned char *sense_buffer,
int sense_len);
-extern void scsi_print_result(struct scsi_cmnd *, const char *, int);
-extern const char *scsi_hostbyte_string(int);
-extern const char *scsi_driverbyte_string(int);
-extern const char *scsi_mlreturn_string(int);
+extern void scsi_print_result(const struct scsi_cmnd *, const char *, int);
+
+#ifdef CONFIG_SCSI_CONSTANTS
+extern bool scsi_opcode_sa_name(int, int, const char **, const char **);
extern const char *scsi_sense_key_string(unsigned char);
extern const char *scsi_extd_sense_format(unsigned char, unsigned char,
const char **);
+extern const char *scsi_mlreturn_string(int);
+extern const char *scsi_hostbyte_string(int);
+extern const char *scsi_driverbyte_string(int);
+#else
+static inline bool
+scsi_opcode_sa_name(int cmd, int sa,
+ const char **cdb_name, const char **sa_name)
+{
+ *cdb_name = NULL;
+ switch (cmd) {
+ case VARIABLE_LENGTH_CMD:
+ case MAINTENANCE_IN:
+ case MAINTENANCE_OUT:
+ case PERSISTENT_RESERVE_IN:
+ case PERSISTENT_RESERVE_OUT:
+ case SERVICE_ACTION_IN_12:
+ case SERVICE_ACTION_OUT_12:
+ case SERVICE_ACTION_BIDIRECTIONAL:
+ case SERVICE_ACTION_IN_16:
+ case SERVICE_ACTION_OUT_16:
+ case EXTENDED_COPY:
+ case RECEIVE_COPY_RESULTS:
+ *sa_name = NULL;
+ return true;
+ default:
+ return false;
+ }
+}
+
+static inline const char *
+scsi_sense_key_string(unsigned char key)
+{
+ return NULL;
+}
+
+static inline const char *
+scsi_extd_sense_format(unsigned char asc, unsigned char ascq, const char **fmt)
+{
+ *fmt = NULL;
+ return NULL;
+}
+
+static inline const char *
+scsi_mlreturn_string(int result)
+{
+ return NULL;
+}
+
+static inline const char *
+scsi_hostbyte_string(int result)
+{
+ return NULL;
+}
+
+static inline const char *
+scsi_driverbyte_string(int result)
+{
+ return NULL;
+}
+
+#endif
#endif /* _SCSI_SCSI_DBG_H */
diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h
index 3a4edd1f7dbb..a4c9336811d1 100644
--- a/include/scsi/scsi_device.h
+++ b/include/scsi/scsi_device.h
@@ -230,9 +230,6 @@ struct scsi_dh_data {
#define transport_class_to_sdev(class_dev) \
to_scsi_device(class_dev->parent)
-#define sdev_printk(prefix, sdev, fmt, a...) \
- dev_printk(prefix, &(sdev)->sdev_gendev, fmt, ##a)
-
#define sdev_dbg(sdev, fmt, a...) \
dev_dbg(&(sdev)->sdev_gendev, fmt, ##a)
@@ -240,16 +237,15 @@ struct scsi_dh_data {
* like scmd_printk, but the device name is passed in
* as a string pointer
*/
-#define sdev_prefix_printk(l, sdev, p, fmt, a...) \
- (p) ? \
- sdev_printk(l, sdev, "[%s] " fmt, p, ##a) : \
- sdev_printk(l, sdev, fmt, ##a)
-
-#define scmd_printk(prefix, scmd, fmt, a...) \
- (scmd)->request->rq_disk ? \
- sdev_printk(prefix, (scmd)->device, "[%s] " fmt, \
- (scmd)->request->rq_disk->disk_name, ##a) : \
- sdev_printk(prefix, (scmd)->device, fmt, ##a)
+__printf(4, 5) void
+sdev_prefix_printk(const char *, const struct scsi_device *, const char *,
+ const char *, ...);
+
+#define sdev_printk(l, sdev, fmt, a...) \
+ sdev_prefix_printk(l, sdev, NULL, fmt, ##a)
+
+__printf(3, 4) void
+scmd_printk(const char *, const struct scsi_cmnd *, const char *, ...);
#define scmd_dbg(scmd, fmt, a...) \
do { \