summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorJesper Nilsson <jesper.nilsson@axis.com>2010-08-04 11:25:13 +0200
committerJesper Nilsson <jesper.nilsson@axis.com>2010-08-04 13:02:38 +0200
commit4f248d1cea12afd2d961509eb2ba19bd0939033f (patch)
treed320bfb5fcaca4b137534f68e96371255c418b8e
parent97a644461d9f47a0b2085d79783017d45b575325 (diff)
downloadlinux-4f248d1cea12afd2d961509eb2ba19bd0939033f.tar.bz2
CRIS: Better ARTPEC-3 support for gpio
Add PWM support, correct comment for ARTPEC-3. Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
-rw-r--r--arch/cris/include/asm/etraxgpio.h96
1 files changed, 78 insertions, 18 deletions
diff --git a/arch/cris/include/asm/etraxgpio.h b/arch/cris/include/asm/etraxgpio.h
index 38f1c8e1770c..d474818a537e 100644
--- a/arch/cris/include/asm/etraxgpio.h
+++ b/arch/cris/include/asm/etraxgpio.h
@@ -21,31 +21,35 @@
* /dev/leds minor 2, Access to leds depending on kernelconfig
*
* For ARTPEC-3 (CONFIG_CRIS_MACH_ARTPEC3):
- * /dev/gpioa minor 0, 8 bit GPIO, each bit can change direction
- * /dev/gpiob minor 1, 18 bit GPIO, each bit can change direction
- * /dev/gpioc minor 3, 18 bit GPIO, each bit can change direction
- * /dev/gpiod minor 4, 18 bit GPIO, each bit can change direction
+ * /dev/gpioa minor 0, 32 bit GPIO, each bit can change direction
+ * /dev/gpiob minor 1, 32 bit GPIO, each bit can change direction
+ * /dev/gpioc minor 3, 16 bit GPIO, each bit can change direction
+ * /dev/gpiod minor 4, 32 bit GPIO, input only
* /dev/leds minor 2, Access to leds depending on kernelconfig
* /dev/pwm0 minor 16, PWM channel 0 on PA30
* /dev/pwm1 minor 17, PWM channel 1 on PA31
* /dev/pwm2 minor 18, PWM channel 2 on PB26
+ * /dev/ppwm minor 19, PPWM channel
*
*/
#ifndef _ASM_ETRAXGPIO_H
#define _ASM_ETRAXGPIO_H
+#define GPIO_MINOR_FIRST 0
+
+#define ETRAXGPIO_IOCTYPE 43
+
/* etraxgpio _IOC_TYPE, bits 8 to 15 in ioctl cmd */
#ifdef CONFIG_ETRAX_ARCH_V10
-#define ETRAXGPIO_IOCTYPE 43
#define GPIO_MINOR_A 0
#define GPIO_MINOR_B 1
#define GPIO_MINOR_LEDS 2
#define GPIO_MINOR_G 3
#define GPIO_MINOR_LAST 3
+#define GPIO_MINOR_LAST_REAL GPIO_MINOR_LAST
#endif
#ifdef CONFIG_ETRAXFS
-#define ETRAXGPIO_IOCTYPE 43
#define GPIO_MINOR_A 0
#define GPIO_MINOR_B 1
#define GPIO_MINOR_LEDS 2
@@ -58,10 +62,10 @@
#else
#define GPIO_MINOR_LAST 5
#endif
+#define GPIO_MINOR_LAST_REAL GPIO_MINOR_LAST
#endif
#ifdef CONFIG_CRIS_MACH_ARTPEC3
-#define ETRAXGPIO_IOCTYPE 43
#define GPIO_MINOR_A 0
#define GPIO_MINOR_B 1
#define GPIO_MINOR_LEDS 2
@@ -73,12 +77,17 @@
#else
#define GPIO_MINOR_LAST 4
#endif
-#define GPIO_MINOR_PWM0 16
-#define GPIO_MINOR_PWM1 17
-#define GPIO_MINOR_PWM2 18
-#define GPIO_MINOR_LAST_PWM GPIO_MINOR_PWM2
+#define GPIO_MINOR_FIRST_PWM 16
+#define GPIO_MINOR_PWM0 (GPIO_MINOR_FIRST_PWM+0)
+#define GPIO_MINOR_PWM1 (GPIO_MINOR_FIRST_PWM+1)
+#define GPIO_MINOR_PWM2 (GPIO_MINOR_FIRST_PWM+2)
+#define GPIO_MINOR_PPWM (GPIO_MINOR_FIRST_PWM+3)
+#define GPIO_MINOR_LAST_PWM GPIO_MINOR_PPWM
+#define GPIO_MINOR_LAST_REAL GPIO_MINOR_LAST_PWM
#endif
+
+
/* supported ioctl _IOC_NR's */
#define IO_READBITS 0x1 /* read and return current port bits (obsolete) */
@@ -125,12 +134,10 @@
*/
#define IO_READ_INBITS 0x10 /* *arg is result of reading the input pins */
#define IO_READ_OUTBITS 0x11 /* *arg is result of reading the output shadow */
-#define IO_SETGET_INPUT 0x12 /* bits set in *arg is set to input,
- * *arg updated with current input pins.
- */
-#define IO_SETGET_OUTPUT 0x13 /* bits set in *arg is set to output,
- * *arg updated with current output pins.
- */
+#define IO_SETGET_INPUT 0x12 /* bits set in *arg is set to input, */
+ /* *arg updated with current input pins. */
+#define IO_SETGET_OUTPUT 0x13 /* bits set in *arg is set to output, */
+ /* *arg updated with current output pins. */
/* The following ioctl's are applicable to the PWM channels only */
@@ -140,7 +147,8 @@ enum io_pwm_mode {
PWM_OFF = 0, /* disabled, deallocated */
PWM_STANDARD = 1, /* 390 kHz, duty cycle 0..255/256 */
PWM_FAST = 2, /* variable freq, w/ 10ns active pulse len */
- PWM_VARFREQ = 3 /* individually configurable high/low periods */
+ PWM_VARFREQ = 3, /* individually configurable high/low periods */
+ PWM_SOFT = 4 /* software generated */
};
struct io_pwm_set_mode {
@@ -176,4 +184,56 @@ struct io_pwm_set_duty {
int duty; /* 0..255 */
};
+/* Returns information about the latest PWM pulse.
+ * lo: Length of the latest low period, in units of 10ns.
+ * hi: Length of the latest high period, in units of 10ns.
+ * cnt: Time since last detected edge, in units of 10ns.
+ *
+ * The input source to PWM is decied by IO_PWM_SET_INPUT_SRC.
+ *
+ * NOTE: All PWM devices is connected to the same input source.
+ */
+#define IO_PWM_GET_PERIOD 0x23
+
+struct io_pwm_get_period {
+ unsigned int lo;
+ unsigned int hi;
+ unsigned int cnt;
+};
+
+/* Sets the input source for the PWM input. For the src value see the
+ * register description for gio:rw_pwm_in_cfg.
+ *
+ * NOTE: All PWM devices is connected to the same input source.
+ */
+#define IO_PWM_SET_INPUT_SRC 0x24
+struct io_pwm_set_input_src {
+ unsigned int src; /* 0..7 */
+};
+
+/* Sets the duty cycles in steps of 1/256, 0 = 0%, 255 = 100% duty cycle */
+#define IO_PPWM_SET_DUTY 0x25
+
+struct io_ppwm_set_duty {
+ int duty; /* 0..255 */
+};
+
+/* Configuraton struct for the IO_PWMCLK_SET_CONFIG ioctl to configure
+ * PWM capable gpio pins:
+ */
+#define IO_PWMCLK_SETGET_CONFIG 0x26
+struct gpio_pwmclk_conf {
+ unsigned int gpiopin; /* The pin number based on the opened device */
+ unsigned int baseclk; /* The base clock to use, or sw will select one close*/
+ unsigned int low; /* The number of low periods of the baseclk */
+ unsigned int high; /* The number of high periods of the baseclk */
+};
+
+/* Examples:
+ * To get a symmetric 12 MHz clock without knowing anything about the hardware:
+ * baseclk = 12000000, low = 0, high = 0
+ * To just get info of current setting:
+ * baseclk = 0, low = 0, high = 0, the values will be updated by driver.
+ */
+
#endif