Merge tag 'for-5.1/libata-20190301' of git://git.kernel.dk/linux-block

Pull libata updates from Jens Axboe:
 "Pretty quiet round: a few small fixes, comment typo, and most notably
  a low level driver for the PATA Buddha controller"

* tag 'for-5.1/libata-20190301' of git://git.kernel.dk/linux-block:
  ata: libahci: Only warn for AHCI_HFLAG_MULTI_MSI set when genuine custom irq handler implemented
  libata: fix a typo in comment
  ata: macio: Use of_node_name_eq for node name comparisons
  ata: pata_samsung_cf: simplify getting .driver_data
  ata: pata_platform: Add IRQF_SHARED to IRQ flags
  ata: pata_of_platform: Allow to use 16-bit wide data transfer
  ata: add Buddha PATA controller driver

10 files changed, 297 insertions, 21 deletions

diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 8218db17ebdb..a6beb2c5a692 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -963,6 +963,18 @@ config PATA_GAYLE
 
 	  If unsure, say N.
 
+config PATA_BUDDHA
+	tristate "Buddha/Catweasel/X-Surf PATA support"
+	depends on ZORRO
+	help
+	  This option enables support for the IDE interfaces
+	  on the Buddha, Catweasel and X-Surf expansion boards
+	  on the Zorro expansion bus. It supports up to two
+	  interfaces on the Buddha, three on the Catweasel and
+	  two on the X-Surf.
+
+	  If unsure, say N.
+
 config PATA_ISAPNP
 	tristate "ISA Plug and Play PATA support"
 	depends on ISAPNP
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index d21cdd83f7ab..d8cc2e04a6c7 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -98,6 +98,7 @@ obj-$(CONFIG_PATA_WINBOND)	+= pata_sl82c105.o
 obj-$(CONFIG_PATA_CMD640_PCI)	+= pata_cmd640.o
 obj-$(CONFIG_PATA_FALCON)	+= pata_falcon.o
 obj-$(CONFIG_PATA_GAYLE)	+= pata_gayle.o
+obj-$(CONFIG_PATA_BUDDHA)	+= pata_buddha.o
 obj-$(CONFIG_PATA_ISAPNP)	+= pata_isapnp.o
 obj-$(CONFIG_PATA_IXP4XX_CF)	+= pata_ixp4xx_cf.o
 obj-$(CONFIG_PATA_MPIIX)	+= pata_mpiix.o
diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c
index b5f57c69c487..692782dddc0f 100644
--- a/drivers/ata/libahci.c
+++ b/drivers/ata/libahci.c
@@ -2599,7 +2599,8 @@ int ahci_host_activate(struct ata_host *host, struct scsi_host_template *sht)
 	int rc;
 
 	if (hpriv->flags & AHCI_HFLAG_MULTI_MSI) {
-		if (hpriv->irq_handler)
+		if (hpriv->irq_handler &&
+		    hpriv->irq_handler != ahci_single_level_irq_intr)
 			dev_warn(host->dev,
 			         "both AHCI_HFLAG_MULTI_MSI flag set and custom irq handler implemented\n");
 		if (!hpriv->get_irq_vector) {
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 3d4887d0e84a..c2adfd8486c4 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -2990,7 +2990,7 @@ static unsigned int atapi_xlat(struct ata_queued_cmd *qc)
 	 * This inconsistency confuses several controllers which
 	 * perform PIO using DMA such as Intel AHCIs and sil3124/32.
 	 * These controllers use actual number of transferred bytes to
-	 * update DMA poitner and transfer of 4n+2 bytes make those
+	 * update DMA pointer and transfer of 4n+2 bytes make those
 	 * controller push DMA pointer by 4n+4 bytes because SATA data
 	 * FISes are aligned to 4 bytes.  This causes data corruption
 	 * and buffer overrun.
diff --git a/drivers/ata/pata_buddha.c b/drivers/ata/pata_buddha.c
new file mode 100644
index 000000000000..11a8044ff633
--- /dev/null
+++ b/drivers/ata/pata_buddha.c
@@ -0,0 +1,257 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/*
+ * Buddha, Catweasel and X-Surf PATA controller driver
+ *
+ * Copyright (c) 2018 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Based on buddha.c:
+ *
+ *	Copyright (C) 1997, 2001 by Geert Uytterhoeven and others
+ */
+
+#include <linux/ata.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/libata.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/zorro.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_host.h>
+
+#include <asm/amigahw.h>
+#include <asm/amigaints.h>
+#include <asm/ide.h>
+#include <asm/setup.h>
+
+#define DRV_NAME "pata_buddha"
+#define DRV_VERSION "0.1.0"
+
+#define BUDDHA_BASE1	0x800
+#define BUDDHA_BASE2	0xa00
+#define BUDDHA_BASE3	0xc00
+#define XSURF_BASE1	0xb000 /* 2.5" interface */
+#define XSURF_BASE2	0xd000 /* 3.5" interface */
+#define BUDDHA_CONTROL	0x11a
+#define BUDDHA_IRQ	0xf00
+#define XSURF_IRQ	0x7e
+#define BUDDHA_IRQ_MR	0xfc0	/* master interrupt enable */
+
+enum {
+	BOARD_BUDDHA = 0,
+	BOARD_CATWEASEL,
+	BOARD_XSURF
+};
+
+static unsigned int buddha_bases[3] __initdata = {
+	BUDDHA_BASE1, BUDDHA_BASE2, BUDDHA_BASE3
+};
+
+static unsigned int xsurf_bases[2] __initdata = {
+	XSURF_BASE1, XSURF_BASE2
+};
+
+static struct scsi_host_template pata_buddha_sht = {
+	ATA_PIO_SHT(DRV_NAME),
+};
+
+/* FIXME: is this needed? */
+static unsigned int pata_buddha_data_xfer(struct ata_queued_cmd *qc,
+					 unsigned char *buf,
+					 unsigned int buflen, int rw)
+{
+	struct ata_device *dev = qc->dev;
+	struct ata_port *ap = dev->link->ap;
+	void __iomem *data_addr = ap->ioaddr.data_addr;
+	unsigned int words = buflen >> 1;
+
+	/* Transfer multiple of 2 bytes */
+	if (rw == READ)
+		raw_insw((u16 *)data_addr, (u16 *)buf, words);
+	else
+		raw_outsw((u16 *)data_addr, (u16 *)buf, words);
+
+	/* Transfer trailing byte, if any. */
+	if (unlikely(buflen & 0x01)) {
+		unsigned char pad[2] = { };
+
+		/* Point buf to the tail of buffer */
+		buf += buflen - 1;
+
+		if (rw == READ) {
+			raw_insw((u16 *)data_addr, (u16 *)pad, 1);
+			*buf = pad[0];
+		} else {
+			pad[0] = *buf;
+			raw_outsw((u16 *)data_addr, (u16 *)pad, 1);
+		}
+		words++;
+	}
+
+	return words << 1;
+}
+
+/*
+ * Provide our own set_mode() as we don't want to change anything that has
+ * already been configured..
+ */
+static int pata_buddha_set_mode(struct ata_link *link,
+				struct ata_device **unused)
+{
+	struct ata_device *dev;
+
+	ata_for_each_dev(dev, link, ENABLED) {
+		/* We don't really care */
+		dev->pio_mode = dev->xfer_mode = XFER_PIO_0;
+		dev->xfer_shift = ATA_SHIFT_PIO;
+		dev->flags |= ATA_DFLAG_PIO;
+		ata_dev_info(dev, "configured for PIO\n");
+	}
+	return 0;
+}
+
+static bool pata_buddha_irq_check(struct ata_port *ap)
+{
+	u8 ch;
+
+	ch = z_readb((unsigned long)ap->private_data);
+
+	return !!(ch & 0x80);
+}
+
+static void pata_xsurf_irq_clear(struct ata_port *ap)
+{
+	z_writeb(0, (unsigned long)ap->private_data);
+}
+
+static struct ata_port_operations pata_buddha_ops = {
+	.inherits	= &ata_sff_port_ops,
+	.sff_data_xfer	= pata_buddha_data_xfer,
+	.sff_irq_check	= pata_buddha_irq_check,
+	.cable_detect	= ata_cable_unknown,
+	.set_mode	= pata_buddha_set_mode,
+};
+
+static struct ata_port_operations pata_xsurf_ops = {
+	.inherits	= &ata_sff_port_ops,
+	.sff_data_xfer	= pata_buddha_data_xfer,
+	.sff_irq_check	= pata_buddha_irq_check,
+	.sff_irq_clear	= pata_xsurf_irq_clear,
+	.cable_detect	= ata_cable_unknown,
+	.set_mode	= pata_buddha_set_mode,
+};
+
+static int __init pata_buddha_init_one(void)
+{
+	struct zorro_dev *z = NULL;
+
+	while ((z = zorro_find_device(ZORRO_WILDCARD, z))) {
+		static const char *board_name[]
+			= { "Buddha", "Catweasel", "X-Surf" };
+		struct ata_host *host;
+		void __iomem *buddha_board;
+		unsigned long board;
+		unsigned int type, nr_ports = 2;
+		int i;
+
+		if (z->id == ZORRO_PROD_INDIVIDUAL_COMPUTERS_BUDDHA) {
+			type = BOARD_BUDDHA;
+		} else if (z->id == ZORRO_PROD_INDIVIDUAL_COMPUTERS_CATWEASEL) {
+			type = BOARD_CATWEASEL;
+			nr_ports++;
+		} else if (z->id == ZORRO_PROD_INDIVIDUAL_COMPUTERS_X_SURF) {
+			type = BOARD_XSURF;
+		} else
+			continue;
+
+		dev_info(&z->dev, "%s IDE controller\n", board_name[type]);
+
+		board = z->resource.start;
+
+		if (type != BOARD_XSURF) {
+			if (!devm_request_mem_region(&z->dev,
+						     board + BUDDHA_BASE1,
+						     0x800, DRV_NAME))
+				continue;
+		} else {
+			if (!devm_request_mem_region(&z->dev,
+						     board + XSURF_BASE1,
+						     0x1000, DRV_NAME))
+				continue;
+			if (!devm_request_mem_region(&z->dev,
+						     board + XSURF_BASE2,
+						     0x1000, DRV_NAME))
+				continue;
+		}
+
+		/* allocate host */
+		host = ata_host_alloc(&z->dev, nr_ports);
+		if (!host)
+			continue;
+
+		buddha_board = ZTWO_VADDR(board);
+
+		/* enable the board IRQ on Buddha/Catweasel */
+		if (type != BOARD_XSURF)
+			z_writeb(0, buddha_board + BUDDHA_IRQ_MR);
+
+		for (i = 0; i < nr_ports; i++) {
+			struct ata_port *ap = host->ports[i];
+			void __iomem *base, *irqport;
+			unsigned long ctl = 0;
+
+			if (type != BOARD_XSURF) {
+				ap->ops = &pata_buddha_ops;
+				base = buddha_board + buddha_bases[i];
+				ctl = BUDDHA_CONTROL;
+				irqport = buddha_board + BUDDHA_IRQ + i * 0x40;
+			} else {
+				ap->ops = &pata_xsurf_ops;
+				base = buddha_board + xsurf_bases[i];
+				/* X-Surf has no CS1* (Control/AltStat) */
+				irqport = buddha_board + XSURF_IRQ;
+			}
+
+			ap->pio_mask = ATA_PIO4;
+			ap->flags |= ATA_FLAG_SLAVE_POSS | ATA_FLAG_NO_IORDY;
+
+			ap->ioaddr.data_addr		= base;
+			ap->ioaddr.error_addr		= base + 2 + 1 * 4;
+			ap->ioaddr.feature_addr		= base + 2 + 1 * 4;
+			ap->ioaddr.nsect_addr		= base + 2 + 2 * 4;
+			ap->ioaddr.lbal_addr		= base + 2 + 3 * 4;
+			ap->ioaddr.lbam_addr		= base + 2 + 4 * 4;
+			ap->ioaddr.lbah_addr		= base + 2 + 5 * 4;
+			ap->ioaddr.device_addr		= base + 2 + 6 * 4;
+			ap->ioaddr.status_addr		= base + 2 + 7 * 4;
+			ap->ioaddr.command_addr		= base + 2 + 7 * 4;
+
+			if (ctl) {
+				ap->ioaddr.altstatus_addr = base + ctl;
+				ap->ioaddr.ctl_addr	  = base + ctl;
+			}
+
+			ap->private_data = (void *)irqport;
+
+			ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", board,
+				      ctl ? board + buddha_bases[i] + ctl : 0);
+		}
+
+		ata_host_activate(host, IRQ_AMIGA_PORTS, ata_sff_interrupt,
+				  IRQF_SHARED, &pata_buddha_sht);
+
+	}
+
+	return 0;
+}
+
+module_init(pata_buddha_init_one);
+
+MODULE_AUTHOR("Bartlomiej Zolnierkiewicz");
+MODULE_DESCRIPTION("low-level driver for Buddha/Catweasel/X-Surf PATA");
+MODULE_LICENSE("GPL v2");
+MODULE_VERSION(DRV_VERSION);
diff --git a/drivers/ata/pata_macio.c b/drivers/ata/pata_macio.c
index 9e7fc302430f..456ae7184f92 100644
--- a/drivers/ata/pata_macio.c
+++ b/drivers/ata/pata_macio.c
@@ -954,7 +954,7 @@ static void pata_macio_invariants(struct pata_macio_priv *priv)
 		priv->kind = controller_k2_ata6;
 	        priv->timings = pata_macio_kauai_timings;
 	} else if (of_device_is_compatible(priv->node, "keylargo-ata")) {
-		if (strcmp(priv->node->name, "ata-4") == 0) {
+		if (of_node_name_eq(priv->node, "ata-4")) {
 			priv->kind = controller_kl_ata4;
 			priv->timings = pata_macio_kl66_timings;
 		} else {
diff --git a/drivers/ata/pata_of_platform.c b/drivers/ata/pata_of_platform.c
index 01161c1aef4d..7a0b1759e5f0 100644
--- a/drivers/ata/pata_of_platform.c
+++ b/drivers/ata/pata_of_platform.c
@@ -32,6 +32,7 @@ static int pata_of_platform_probe(struct platform_device *ofdev)
 	unsigned int reg_shift = 0;
 	int pio_mode = 0;
 	int pio_mask;
+	bool use16bit;
 
 	ret = of_address_to_resource(dn, 0, &io_res);
 	if (ret) {
@@ -60,11 +61,14 @@ static int pata_of_platform_probe(struct platform_device *ofdev)
 		dev_info(&ofdev->dev, "pio-mode unspecified, assuming PIO0\n");
 	}
 
+	use16bit = of_property_read_bool(dn, "ata-generic,use16bit");
+
 	pio_mask = 1 << pio_mode;
 	pio_mask |= (1 << pio_mode) - 1;
 
 	return __pata_platform_probe(&ofdev->dev, &io_res, &ctl_res, irq_res,
-				     reg_shift, pio_mask, &pata_platform_sht);
+				     reg_shift, pio_mask, &pata_platform_sht,
+				     use16bit);
 }
 
 static const struct of_device_id pata_of_platform_match[] = {
diff --git a/drivers/ata/pata_platform.c b/drivers/ata/pata_platform.c
index d6f8f5406442..5aba691f09af 100644
--- a/drivers/ata/pata_platform.c
+++ b/drivers/ata/pata_platform.c
@@ -47,13 +47,6 @@ static struct scsi_host_template pata_platform_sht = {
 	ATA_PIO_SHT(DRV_NAME),
 };
 
-static struct ata_port_operations pata_platform_port_ops = {
-	.inherits		= &ata_sff_port_ops,
-	.sff_data_xfer		= ata_sff_data_xfer32,
-	.cable_detect		= ata_cable_unknown,
-	.set_mode		= pata_platform_set_mode,
-};
-
 static void pata_platform_setup_port(struct ata_ioports *ioaddr,
 				     unsigned int shift)
 {
@@ -79,6 +72,7 @@ static void pata_platform_setup_port(struct ata_ioports *ioaddr,
  *	@ioport_shift: I/O port shift
  *	@__pio_mask: PIO mask
  *	@sht: scsi_host_template to use when registering
+ *	@use16bit: Flag to indicate 16-bit IO instead of 32-bit
  *
  *	Register a platform bus IDE interface. Such interfaces are PIO and we
  *	assume do not support IRQ sharing.
@@ -101,7 +95,7 @@ static void pata_platform_setup_port(struct ata_ioports *ioaddr,
 int __pata_platform_probe(struct device *dev, struct resource *io_res,
 			  struct resource *ctl_res, struct resource *irq_res,
 			  unsigned int ioport_shift, int __pio_mask,
-			  struct scsi_host_template *sht)
+			  struct scsi_host_template *sht, bool use16bit)
 {
 	struct ata_host *host;
 	struct ata_port *ap;
@@ -120,7 +114,7 @@ int __pata_platform_probe(struct device *dev, struct resource *io_res,
 	 */
 	if (irq_res && irq_res->start > 0) {
 		irq = irq_res->start;
-		irq_flags = irq_res->flags & IRQF_TRIGGER_MASK;
+		irq_flags = (irq_res->flags & IRQF_TRIGGER_MASK) | IRQF_SHARED;
 	}
 
 	/*
@@ -131,7 +125,15 @@ int __pata_platform_probe(struct device *dev, struct resource *io_res,
 		return -ENOMEM;
 	ap = host->ports[0];
 
-	ap->ops = &pata_platform_port_ops;
+	ap->ops = devm_kzalloc(dev, sizeof(*ap->ops), GFP_KERNEL);
+	ap->ops->inherits = &ata_sff_port_ops;
+	ap->ops->cable_detect = ata_cable_unknown;
+	ap->ops->set_mode = pata_platform_set_mode;
+	if (use16bit)
+		ap->ops->sff_data_xfer = ata_sff_data_xfer;
+	else
+		ap->ops->sff_data_xfer = ata_sff_data_xfer32;
+
 	ap->pio_mask = __pio_mask;
 	ap->flags |= ATA_FLAG_SLAVE_POSS;
 
@@ -218,7 +220,7 @@ static int pata_platform_probe(struct platform_device *pdev)
 
 	return __pata_platform_probe(&pdev->dev, io_res, ctl_res, irq_res,
 				     pp_info ? pp_info->ioport_shift : 0,
-				     pio_mask, &pata_platform_sht);
+				     pio_mask, &pata_platform_sht, false);
 }
 
 static struct platform_driver pata_platform_driver = {
diff --git a/drivers/ata/pata_samsung_cf.c b/drivers/ata/pata_samsung_cf.c
index f5bd44b8bd63..1dc3361cb5a5 100644
--- a/drivers/ata/pata_samsung_cf.c
+++ b/drivers/ata/pata_samsung_cf.c
@@ -609,17 +609,15 @@ static int __exit pata_s3c_remove(struct platform_device *pdev)
 #ifdef CONFIG_PM_SLEEP
 static int pata_s3c_suspend(struct device *dev)
 {
-	struct platform_device *pdev = to_platform_device(dev);
-	struct ata_host *host = platform_get_drvdata(pdev);
+	struct ata_host *host = dev_get_drvdata(dev);
 
 	return ata_host_suspend(host, PMSG_SUSPEND);
 }
 
 static int pata_s3c_resume(struct device *dev)
 {
-	struct platform_device *pdev = to_platform_device(dev);
-	struct ata_host *host = platform_get_drvdata(pdev);
-	struct s3c_ide_platdata *pdata = dev_get_platdata(&pdev->dev);
+	struct ata_host *host = dev_get_drvdata(dev);
+	struct s3c_ide_platdata *pdata = dev_get_platdata(dev);
 	struct s3c_ide_info *info = host->private_data;
 
 	pata_s3c_hwinit(info, pdata);
diff --git a/include/linux/ata_platform.h b/include/linux/ata_platform.h
index ff2120215dec..9cafec92282d 100644
--- a/include/linux/ata_platform.h
+++ b/include/linux/ata_platform.h
@@ -19,7 +19,8 @@ extern int __pata_platform_probe(struct device *dev,
 				 struct resource *irq_res,
 				 unsigned int ioport_shift,
 				 int __pio_mask,
-				 struct scsi_host_template *sht);
+				 struct scsi_host_template *sht,
+				 bool use16bit);
 
 /*
  * Marvell SATA private data