summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorBoris Brezillon <boris.brezillon@bootlin.com>2018-09-07 00:38:49 +0200
committerMiquel Raynal <miquel.raynal@bootlin.com>2018-10-03 11:12:25 +0200
commit3d4af7c195850cfccaddc2cf03b010b95236b695 (patch)
tree3eb0b6597f871f441ea07a0ff34abbb062887d68
parent348d56a8c6067f3b2f1799d6f050f3be4bf5904b (diff)
downloadlinux-3d4af7c195850cfccaddc2cf03b010b95236b695.tar.bz2
mtd: rawnand: Move legacy code to nand_legacy.c
Allows us to move a few hundred lines of deprecated code out of the core file which is quite big. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-rw-r--r--drivers/mtd/nand/raw/Makefile2
-rw-r--r--drivers/mtd/nand/raw/internals.h6
-rw-r--r--drivers/mtd/nand/raw/nand_base.c618
-rw-r--r--drivers/mtd/nand/raw/nand_legacy.c642
4 files changed, 660 insertions, 608 deletions
diff --git a/drivers/mtd/nand/raw/Makefile b/drivers/mtd/nand/raw/Makefile
index a6ef0673e29e..78f67de2e60b 100644
--- a/drivers/mtd/nand/raw/Makefile
+++ b/drivers/mtd/nand/raw/Makefile
@@ -57,7 +57,7 @@ obj-$(CONFIG_MTD_NAND_QCOM) += qcom_nandc.o
obj-$(CONFIG_MTD_NAND_MTK) += mtk_ecc.o mtk_nand.o
obj-$(CONFIG_MTD_NAND_TEGRA) += tegra_nand.o
-nand-objs := nand_base.o nand_bbt.o nand_timings.o nand_ids.o
+nand-objs := nand_base.o nand_legacy.o nand_bbt.o nand_timings.o nand_ids.o
nand-objs += nand_amd.o
nand-objs += nand_hynix.o
nand-objs += nand_macronix.o
diff --git a/drivers/mtd/nand/raw/internals.h b/drivers/mtd/nand/raw/internals.h
index 1d2edddb6127..289a4b8f7974 100644
--- a/drivers/mtd/nand/raw/internals.h
+++ b/drivers/mtd/nand/raw/internals.h
@@ -89,10 +89,16 @@ int nand_write_page_raw_notsupp(struct nand_chip *chip, const u8 *buf,
int oob_required, int page);
int nand_exit_status_op(struct nand_chip *chip);
void nand_decode_ext_id(struct nand_chip *chip);
+void panic_nand_wait(struct nand_chip *chip, unsigned long timeo);
/* BBT functions */
int nand_markbad_bbt(struct nand_chip *chip, loff_t offs);
int nand_isreserved_bbt(struct nand_chip *chip, loff_t offs);
int nand_isbad_bbt(struct nand_chip *chip, loff_t offs, int allowbbt);
+/* Legacy */
+void nand_legacy_set_defaults(struct nand_chip *chip);
+void nand_legacy_adjust_cmdfunc(struct nand_chip *chip);
+int nand_legacy_check_hooks(struct nand_chip *chip);
+
#endif /* __LINUX_RAWNAND_INTERNALS */
diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c
index d48c588d1abe..4ef00cefd5da 100644
--- a/drivers/mtd/nand/raw/nand_base.c
+++ b/drivers/mtd/nand/raw/nand_base.c
@@ -36,7 +36,6 @@
#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/mm.h>
-#include <linux/nmi.h>
#include <linux/types.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand_ecc.h>
@@ -254,150 +253,6 @@ static void nand_release_device(struct mtd_info *mtd)
}
/**
- * nand_read_byte - [DEFAULT] read one byte from the chip
- * @chip: NAND chip object
- *
- * Default read function for 8bit buswidth
- */
-static uint8_t nand_read_byte(struct nand_chip *chip)
-{
- return readb(chip->legacy.IO_ADDR_R);
-}
-
-/**
- * nand_read_byte16 - [DEFAULT] read one byte endianness aware from the chip
- * @chip: NAND chip object
- *
- * Default read function for 16bit buswidth with endianness conversion.
- *
- */
-static uint8_t nand_read_byte16(struct nand_chip *chip)
-{
- return (uint8_t) cpu_to_le16(readw(chip->legacy.IO_ADDR_R));
-}
-
-/**
- * nand_select_chip - [DEFAULT] control CE line
- * @chip: NAND chip object
- * @chipnr: chipnumber to select, -1 for deselect
- *
- * Default select function for 1 chip devices.
- */
-static void nand_select_chip(struct nand_chip *chip, int chipnr)
-{
- switch (chipnr) {
- case -1:
- chip->legacy.cmd_ctrl(chip, NAND_CMD_NONE,
- 0 | NAND_CTRL_CHANGE);
- break;
- case 0:
- break;
-
- default:
- BUG();
- }
-}
-
-/**
- * nand_write_byte - [DEFAULT] write single byte to chip
- * @chip: NAND chip object
- * @byte: value to write
- *
- * Default function to write a byte to I/O[7:0]
- */
-static void nand_write_byte(struct nand_chip *chip, uint8_t byte)
-{
- chip->legacy.write_buf(chip, &byte, 1);
-}
-
-/**
- * nand_write_byte16 - [DEFAULT] write single byte to a chip with width 16
- * @chip: NAND chip object
- * @byte: value to write
- *
- * Default function to write a byte to I/O[7:0] on a 16-bit wide chip.
- */
-static void nand_write_byte16(struct nand_chip *chip, uint8_t byte)
-{
- uint16_t word = byte;
-
- /*
- * It's not entirely clear what should happen to I/O[15:8] when writing
- * a byte. The ONFi spec (Revision 3.1; 2012-09-19, Section 2.16) reads:
- *
- * When the host supports a 16-bit bus width, only data is
- * transferred at the 16-bit width. All address and command line
- * transfers shall use only the lower 8-bits of the data bus. During
- * command transfers, the host may place any value on the upper
- * 8-bits of the data bus. During address transfers, the host shall
- * set the upper 8-bits of the data bus to 00h.
- *
- * One user of the write_byte callback is nand_set_features. The
- * four parameters are specified to be written to I/O[7:0], but this is
- * neither an address nor a command transfer. Let's assume a 0 on the
- * upper I/O lines is OK.
- */
- chip->legacy.write_buf(chip, (uint8_t *)&word, 2);
-}
-
-/**
- * nand_write_buf - [DEFAULT] write buffer to chip
- * @chip: NAND chip object
- * @buf: data buffer
- * @len: number of bytes to write
- *
- * Default write function for 8bit buswidth.
- */
-static void nand_write_buf(struct nand_chip *chip, const uint8_t *buf, int len)
-{
- iowrite8_rep(chip->legacy.IO_ADDR_W, buf, len);
-}
-
-/**
- * nand_read_buf - [DEFAULT] read chip data into buffer
- * @chip: NAND chip object
- * @buf: buffer to store date
- * @len: number of bytes to read
- *
- * Default read function for 8bit buswidth.
- */
-static void nand_read_buf(struct nand_chip *chip, uint8_t *buf, int len)
-{
- ioread8_rep(chip->legacy.IO_ADDR_R, buf, len);
-}
-
-/**
- * nand_write_buf16 - [DEFAULT] write buffer to chip
- * @chip: NAND chip object
- * @buf: data buffer
- * @len: number of bytes to write
- *
- * Default write function for 16bit buswidth.
- */
-static void nand_write_buf16(struct nand_chip *chip, const uint8_t *buf,
- int len)
-{
- u16 *p = (u16 *) buf;
-
- iowrite16_rep(chip->legacy.IO_ADDR_W, p, len >> 1);
-}
-
-/**
- * nand_read_buf16 - [DEFAULT] read chip data into buffer
- * @chip: NAND chip object
- * @buf: buffer to store date
- * @len: number of bytes to read
- *
- * Default read function for 16bit buswidth.
- */
-static void nand_read_buf16(struct nand_chip *chip, uint8_t *buf, int len)
-{
- u16 *p = (u16 *) buf;
-
- ioread16_rep(chip->legacy.IO_ADDR_R, p, len >> 1);
-}
-
-/**
* nand_block_bad - [DEFAULT] Read bad block marker from the chip
* @chip: NAND chip object
* @ofs: offset from device start
@@ -612,81 +467,6 @@ static int nand_block_checkbad(struct mtd_info *mtd, loff_t ofs, int allowbbt)
}
/**
- * panic_nand_wait_ready - [GENERIC] Wait for the ready pin after commands.
- * @mtd: MTD device structure
- * @timeo: Timeout
- *
- * Helper function for nand_wait_ready used when needing to wait in interrupt
- * context.
- */
-static void panic_nand_wait_ready(struct mtd_info *mtd, unsigned long timeo)
-{
- struct nand_chip *chip = mtd_to_nand(mtd);
- int i;
-
- /* Wait for the device to get ready */
- for (i = 0; i < timeo; i++) {
- if (chip->legacy.dev_ready(chip))
- break;
- touch_softlockup_watchdog();
- mdelay(1);
- }
-}
-
-/**
- * nand_wait_ready - [GENERIC] Wait for the ready pin after commands.
- * @chip: NAND chip object
- *
- * Wait for the ready pin after a command, and warn if a timeout occurs.
- */
-void nand_wait_ready(struct nand_chip *chip)
-{
- struct mtd_info *mtd = nand_to_mtd(chip);
- unsigned long timeo = 400;
-
- if (in_interrupt() || oops_in_progress)
- return panic_nand_wait_ready(mtd, timeo);
-
- /* Wait until command is processed or timeout occurs */
- timeo = jiffies + msecs_to_jiffies(timeo);
- do {
- if (chip->legacy.dev_ready(chip))
- return;
- cond_resched();
- } while (time_before(jiffies, timeo));
-
- if (!chip->legacy.dev_ready(chip))
- pr_warn_ratelimited("timeout while waiting for chip to become ready\n");
-}
-EXPORT_SYMBOL_GPL(nand_wait_ready);
-
-/**
- * nand_wait_status_ready - [GENERIC] Wait for the ready status after commands.
- * @mtd: MTD device structure
- * @timeo: Timeout in ms
- *
- * Wait for status ready (i.e. command done) or timeout.
- */
-static void nand_wait_status_ready(struct mtd_info *mtd, unsigned long timeo)
-{
- register struct nand_chip *chip = mtd_to_nand(mtd);
- int ret;
-
- timeo = jiffies + msecs_to_jiffies(timeo);
- do {
- u8 status;
-
- ret = nand_read_data_op(chip, &status, sizeof(status), true);
- if (ret)
- return;
-
- if (status & NAND_STATUS_READY)
- break;
- touch_softlockup_watchdog();
- } while (time_before(jiffies, timeo));
-};
-
-/**
* nand_soft_waitrdy - Poll STATUS reg until RDY bit is set to 1
* @chip: NAND chip structure
* @timeout_ms: Timeout in ms
@@ -752,275 +532,6 @@ int nand_soft_waitrdy(struct nand_chip *chip, unsigned long timeout_ms)
EXPORT_SYMBOL_GPL(nand_soft_waitrdy);
/**
- * nand_command - [DEFAULT] Send command to NAND device
- * @chip: NAND chip object
- * @command: the command to be sent
- * @column: the column address for this command, -1 if none
- * @page_addr: the page address for this command, -1 if none
- *
- * Send command to NAND device. This function is used for small page devices
- * (512 Bytes per page).
- */
-static void nand_command(struct nand_chip *chip, unsigned int command,
- int column, int page_addr)
-{
- struct mtd_info *mtd = nand_to_mtd(chip);
- int ctrl = NAND_CTRL_CLE | NAND_CTRL_CHANGE;
-
- /* Write out the command to the device */
- if (command == NAND_CMD_SEQIN) {
- int readcmd;
-
- if (column >= mtd->writesize) {
- /* OOB area */
- column -= mtd->writesize;
- readcmd = NAND_CMD_READOOB;
- } else if (column < 256) {
- /* First 256 bytes --> READ0 */
- readcmd = NAND_CMD_READ0;
- } else {
- column -= 256;
- readcmd = NAND_CMD_READ1;
- }
- chip->legacy.cmd_ctrl(chip, readcmd, ctrl);
- ctrl &= ~NAND_CTRL_CHANGE;
- }
- if (command != NAND_CMD_NONE)
- chip->legacy.cmd_ctrl(chip, command, ctrl);
-
- /* Address cycle, when necessary */
- ctrl = NAND_CTRL_ALE | NAND_CTRL_CHANGE;
- /* Serially input address */
- if (column != -1) {
- /* Adjust columns for 16 bit buswidth */
- if (chip->options & NAND_BUSWIDTH_16 &&
- !nand_opcode_8bits(command))
- column >>= 1;
- chip->legacy.cmd_ctrl(chip, column, ctrl);
- ctrl &= ~NAND_CTRL_CHANGE;
- }
- if (page_addr != -1) {
- chip->legacy.cmd_ctrl(chip, page_addr, ctrl);
- ctrl &= ~NAND_CTRL_CHANGE;
- chip->legacy.cmd_ctrl(chip, page_addr >> 8, ctrl);
- if (chip->options & NAND_ROW_ADDR_3)
- chip->legacy.cmd_ctrl(chip, page_addr >> 16, ctrl);
- }
- chip->legacy.cmd_ctrl(chip, NAND_CMD_NONE,
- NAND_NCE | NAND_CTRL_CHANGE);
-
- /*
- * Program and erase have their own busy handlers status and sequential
- * in needs no delay
- */
- switch (command) {
-
- case NAND_CMD_NONE:
- case NAND_CMD_PAGEPROG:
- case NAND_CMD_ERASE1:
- case NAND_CMD_ERASE2:
- case NAND_CMD_SEQIN:
- case NAND_CMD_STATUS:
- case NAND_CMD_READID:
- case NAND_CMD_SET_FEATURES:
- return;
-
- case NAND_CMD_RESET:
- if (chip->legacy.dev_ready)
- break;
- udelay(chip->legacy.chip_delay);
- chip->legacy.cmd_ctrl(chip, NAND_CMD_STATUS,
- NAND_CTRL_CLE | NAND_CTRL_CHANGE);
- chip->legacy.cmd_ctrl(chip, NAND_CMD_NONE,
- NAND_NCE | NAND_CTRL_CHANGE);
- /* EZ-NAND can take upto 250ms as per ONFi v4.0 */
- nand_wait_status_ready(mtd, 250);
- return;
-
- /* This applies to read commands */
- case NAND_CMD_READ0:
- /*
- * READ0 is sometimes used to exit GET STATUS mode. When this
- * is the case no address cycles are requested, and we can use
- * this information to detect that we should not wait for the
- * device to be ready.
- */
- if (column == -1 && page_addr == -1)
- return;
-
- default:
- /*
- * If we don't have access to the busy pin, we apply the given
- * command delay
- */
- if (!chip->legacy.dev_ready) {
- udelay(chip->legacy.chip_delay);
- return;
- }
- }
- /*
- * Apply this short delay always to ensure that we do wait tWB in
- * any case on any machine.
- */
- ndelay(100);
-
- nand_wait_ready(chip);
-}
-
-static void nand_ccs_delay(struct nand_chip *chip)
-{
- /*
- * The controller already takes care of waiting for tCCS when the RNDIN
- * or RNDOUT command is sent, return directly.
- */
- if (!(chip->options & NAND_WAIT_TCCS))
- return;
-
- /*
- * Wait tCCS_min if it is correctly defined, otherwise wait 500ns
- * (which should be safe for all NANDs).
- */
- if (chip->setup_data_interface)
- ndelay(chip->data_interface.timings.sdr.tCCS_min / 1000);
- else
- ndelay(500);
-}
-
-/**
- * nand_command_lp - [DEFAULT] Send command to NAND large page device
- * @chip: NAND chip object
- * @command: the command to be sent
- * @column: the column address for this command, -1 if none
- * @page_addr: the page address for this command, -1 if none
- *
- * Send command to NAND device. This is the version for the new large page
- * devices. We don't have the separate regions as we have in the small page
- * devices. We must emulate NAND_CMD_READOOB to keep the code compatible.
- */
-static void nand_command_lp(struct nand_chip *chip, unsigned int command,
- int column, int page_addr)
-{
- struct mtd_info *mtd = nand_to_mtd(chip);
-
- /* Emulate NAND_CMD_READOOB */
- if (command == NAND_CMD_READOOB) {
- column += mtd->writesize;
- command = NAND_CMD_READ0;
- }
-
- /* Command latch cycle */
- if (command != NAND_CMD_NONE)
- chip->legacy.cmd_ctrl(chip, command,
- NAND_NCE | NAND_CLE | NAND_CTRL_CHANGE);
-
- if (column != -1 || page_addr != -1) {
- int ctrl = NAND_CTRL_CHANGE | NAND_NCE | NAND_ALE;
-
- /* Serially input address */
- if (column != -1) {
- /* Adjust columns for 16 bit buswidth */
- if (chip->options & NAND_BUSWIDTH_16 &&
- !nand_opcode_8bits(command))
- column >>= 1;
- chip->legacy.cmd_ctrl(chip, column, ctrl);
- ctrl &= ~NAND_CTRL_CHANGE;
-
- /* Only output a single addr cycle for 8bits opcodes. */
- if (!nand_opcode_8bits(command))
- chip->legacy.cmd_ctrl(chip, column >> 8, ctrl);
- }
- if (page_addr != -1) {
- chip->legacy.cmd_ctrl(chip, page_addr, ctrl);
- chip->legacy.cmd_ctrl(chip, page_addr >> 8,
- NAND_NCE | NAND_ALE);
- if (chip->options & NAND_ROW_ADDR_3)
- chip->legacy.cmd_ctrl(chip, page_addr >> 16,
- NAND_NCE | NAND_ALE);
- }
- }
- chip->legacy.cmd_ctrl(chip, NAND_CMD_NONE,
- NAND_NCE | NAND_CTRL_CHANGE);
-
- /*
- * Program and erase have their own busy handlers status, sequential
- * in and status need no delay.
- */
- switch (command) {
-
- case NAND_CMD_NONE:
- case NAND_CMD_CACHEDPROG:
- case NAND_CMD_PAGEPROG:
- case NAND_CMD_ERASE1:
- case NAND_CMD_ERASE2:
- case NAND_CMD_SEQIN:
- case NAND_CMD_STATUS:
- case NAND_CMD_READID:
- case NAND_CMD_SET_FEATURES:
- return;
-
- case NAND_CMD_RNDIN:
- nand_ccs_delay(chip);
- return;
-
- case NAND_CMD_RESET:
- if (chip->legacy.dev_ready)
- break;
- udelay(chip->legacy.chip_delay);
- chip->legacy.cmd_ctrl(chip, NAND_CMD_STATUS,
- NAND_NCE | NAND_CLE | NAND_CTRL_CHANGE);
- chip->legacy.cmd_ctrl(chip, NAND_CMD_NONE,
- NAND_NCE | NAND_CTRL_CHANGE);
- /* EZ-NAND can take upto 250ms as per ONFi v4.0 */
- nand_wait_status_ready(mtd, 250);
- return;
-
- case NAND_CMD_RNDOUT:
- /* No ready / busy check necessary */
- chip->legacy.cmd_ctrl(chip, NAND_CMD_RNDOUTSTART,
- NAND_NCE | NAND_CLE | NAND_CTRL_CHANGE);
- chip->legacy.cmd_ctrl(chip, NAND_CMD_NONE,
- NAND_NCE | NAND_CTRL_CHANGE);
-
- nand_ccs_delay(chip);
- return;
-
- case NAND_CMD_READ0:
- /*
- * READ0 is sometimes used to exit GET STATUS mode. When this
- * is the case no address cycles are requested, and we can use
- * this information to detect that READSTART should not be
- * issued.
- */
- if (column == -1 && page_addr == -1)
- return;
-
- chip->legacy.cmd_ctrl(chip, NAND_CMD_READSTART,
- NAND_NCE | NAND_CLE | NAND_CTRL_CHANGE);
- chip->legacy.cmd_ctrl(chip, NAND_CMD_NONE,
- NAND_NCE | NAND_CTRL_CHANGE);
-
- /* This applies to read commands */
- default:
- /*
- * If we don't have access to the busy pin, we apply the given
- * command delay.
- */
- if (!chip->legacy.dev_ready) {
- udelay(chip->legacy.chip_delay);
- return;
- }
- }
-
- /*
- * Apply this short delay always to ensure that we do wait tWB in
- * any case on any machine.
- */
- ndelay(100);
-
- nand_wait_ready(chip);
-}
-
-/**
* panic_nand_get_device - [GENERIC] Get chip for selected access
* @chip: the nand chip descriptor
* @mtd: MTD device structure
@@ -1087,7 +598,7 @@ retry:
* we are in interrupt context. May happen when in panic and trying to write
* an oops through mtdoops.
*/
-static void panic_nand_wait(struct nand_chip *chip, unsigned long timeo)
+void panic_nand_wait(struct nand_chip *chip, unsigned long timeo)
{
int i;
for (i = 0; i < timeo; i++) {
@@ -1110,60 +621,6 @@ static void panic_nand_wait(struct nand_chip *chip, unsigned long timeo)
}
}
-/**
- * nand_wait - [DEFAULT] wait until the command is done
- * @mtd: MTD device structure
- * @chip: NAND chip structure
- *
- * Wait for command done. This applies to erase and program only.
- */
-static int nand_wait(struct nand_chip *chip)
-{
-
- unsigned long timeo = 400;
- u8 status;
- int ret;
-
- /*
- * Apply this short delay always to ensure that we do wait tWB in any
- * case on any machine.
- */
- ndelay(100);
-
- ret = nand_status_op(chip, NULL);
- if (ret)
- return ret;
-
- if (in_interrupt() || oops_in_progress)
- panic_nand_wait(chip, timeo);
- else {
- timeo = jiffies + msecs_to_jiffies(timeo);
- do {
- if (chip->legacy.dev_ready) {
- if (chip->legacy.dev_ready(chip))
- break;
- } else {
- ret = nand_read_data_op(chip, &status,
- sizeof(status), true);
- if (ret)
- return ret;
-
- if (status & NAND_STATUS_READY)
- break;
- }
- cond_resched();
- } while (time_before(jiffies, timeo));
- }
-
- ret = nand_read_data_op(chip, &status, sizeof(status), true);
- if (ret)
- return ret;
-
- /* This can happen if in case of timeout or buggy dev_ready */
- WARN_ON(!(status & NAND_STATUS_READY));
- return status;
-}
-
static bool nand_supports_get_features(struct nand_chip *chip, int addr)
{
return (chip->parameters.supports_set_get_features &&
@@ -4865,22 +4322,6 @@ static int nand_max_bad_blocks(struct mtd_info *mtd, loff_t ofs, size_t len)
}
/**
- * nand_get_set_features_notsupp - set/get features stub returning -ENOTSUPP
- * @chip: nand chip info structure
- * @addr: feature address.
- * @subfeature_param: the subfeature parameters, a four bytes array.
- *
- * Should be used by NAND controller drivers that do not support the SET/GET
- * FEATURES operations.
- */
-int nand_get_set_features_notsupp(struct nand_chip *chip, int addr,
- u8 *subfeature_param)
-{
- return -ENOTSUPP;
-}
-EXPORT_SYMBOL(nand_get_set_features_notsupp);
-
-/**
* nand_suspend - [MTD Interface] Suspend the NAND flash
* @mtd: MTD device structure
*/
@@ -4917,32 +4358,7 @@ static void nand_shutdown(struct mtd_info *mtd)
/* Set default functions */
static void nand_set_defaults(struct nand_chip *chip)
{
- unsigned int busw = chip->options & NAND_BUSWIDTH_16;
-
- /* check for proper chip_delay setup, set 20us if not */
- if (!chip->legacy.chip_delay)
- chip->legacy.chip_delay = 20;
-
- /* check, if a user supplied command function given */
- if (!chip->legacy.cmdfunc && !chip->exec_op)
- chip->legacy.cmdfunc = nand_command;
-
- /* check, if a user supplied wait function given */
- if (chip->legacy.waitfunc == NULL)
- chip->legacy.waitfunc = nand_wait;
-
- if (!chip->select_chip)
- chip->select_chip = nand_select_chip;
-
- /* If called twice, pointers that depend on busw may need to be reset */
- if (!chip->legacy.read_byte || chip->legacy.read_byte == nand_read_byte)
- chip->legacy.read_byte = busw ? nand_read_byte16 : nand_read_byte;
- if (!chip->legacy.write_buf || chip->legacy.write_buf == nand_write_buf)
- chip->legacy.write_buf = busw ? nand_write_buf16 : nand_write_buf;
- if (!chip->legacy.write_byte || chip->legacy.write_byte == nand_write_byte)
- chip->legacy.write_byte = busw ? nand_write_byte16 : nand_write_byte;
- if (!chip->legacy.read_buf || chip->legacy.read_buf == nand_read_buf)
- chip->legacy.read_buf = busw ? nand_read_buf16 : nand_read_buf;
+ nand_legacy_set_defaults(chip);
if (!chip->controller) {
chip->controller = &chip->dummy_controller;
@@ -5212,9 +4628,7 @@ static int nand_flash_detect_onfi(struct nand_chip *chip)
* chip->legacy.cmdfunc now. We do not replace user supplied
* command function.
*/
- if (mtd->writesize > 512 &&
- chip->legacy.cmdfunc == nand_command)
- chip->legacy.cmdfunc = nand_command_lp;
+ nand_legacy_adjust_cmdfunc(chip);
/* The Extended Parameter Page is supported since ONFI 2.1. */
if (nand_flash_detect_ext_param_page(chip, p))
@@ -5737,9 +5151,7 @@ ident_done:
chip->badblockbits = 8;
- /* Do not replace user supplied command function! */
- if (mtd->writesize > 512 && chip->legacy.cmdfunc == nand_command)
- chip->legacy.cmdfunc = nand_command_lp;
+ nand_legacy_adjust_cmdfunc(chip);
pr_info("device found, Manufacturer ID: 0x%02x, Chip ID: 0x%02x\n",
maf_id, dev_id);
@@ -5935,23 +5347,15 @@ static int nand_scan_ident(struct nand_chip *chip, unsigned int maxchips,
if (!mtd->name && mtd->dev.parent)
mtd->name = dev_name(mtd->dev.parent);
- /*
- * ->legacy.cmdfunc() is legacy and will only be used if ->exec_op() is
- * not populated.
- */
- if (!chip->exec_op) {
- /*
- * Default functions assigned for ->legacy.cmdfunc() and
- * ->select_chip() both expect ->legacy.cmd_ctrl() to be
- * populated.
- */
- if ((!chip->legacy.cmdfunc || !chip->select_chip) &&
- !chip->legacy.cmd_ctrl) {
- pr_err("->legacy.cmd_ctrl() should be provided\n");
- return -EINVAL;
- }
+ if (chip->exec_op && !chip->select_chip) {
+ pr_err("->select_chip() is mandatory when implementing ->exec_op()\n");
+ return -EINVAL;
}
+ ret = nand_legacy_check_hooks(chip);
+ if (ret)
+ return ret;
+
/* Set the default functions */
nand_set_defaults(chip);
diff --git a/drivers/mtd/nand/raw/nand_legacy.c b/drivers/mtd/nand/raw/nand_legacy.c
new file mode 100644
index 000000000000..c5ddc86cd98c
--- /dev/null
+++ b/drivers/mtd/nand/raw/nand_legacy.c
@@ -0,0 +1,642 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2000 Steven J. Hill (sjhill@realitydiluted.com)
+ * 2002-2006 Thomas Gleixner (tglx@linutronix.de)
+ *
+ * Credits:
+ * David Woodhouse for adding multichip support
+ *
+ * Aleph One Ltd. and Toby Churchill Ltd. for supporting the
+ * rework for 2K page size chips
+ *
+ * This file contains all legacy helpers/code that should be removed
+ * at some point.
+ */
+
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/nmi.h>
+
+#include "internals.h"
+
+/**
+ * nand_read_byte - [DEFAULT] read one byte from the chip
+ * @chip: NAND chip object
+ *
+ * Default read function for 8bit buswidth
+ */
+static uint8_t nand_read_byte(struct nand_chip *chip)
+{
+ return readb(chip->legacy.IO_ADDR_R);
+}
+
+/**
+ * nand_read_byte16 - [DEFAULT] read one byte endianness aware from the chip
+ * @chip: NAND chip object
+ *
+ * Default read function for 16bit buswidth with endianness conversion.
+ *
+ */
+static uint8_t nand_read_byte16(struct nand_chip *chip)
+{
+ return (uint8_t) cpu_to_le16(readw(chip->legacy.IO_ADDR_R));
+}
+
+/**
+ * nand_select_chip - [DEFAULT] control CE line
+ * @chip: NAND chip object
+ * @chipnr: chipnumber to select, -1 for deselect
+ *
+ * Default select function for 1 chip devices.
+ */
+static void nand_select_chip(struct nand_chip *chip, int chipnr)
+{
+ switch (chipnr) {
+ case -1:
+ chip->legacy.cmd_ctrl(chip, NAND_CMD_NONE,
+ 0 | NAND_CTRL_CHANGE);
+ break;
+ case 0:
+ break;
+
+ default:
+ BUG();
+ }
+}
+
+/**
+ * nand_write_byte - [DEFAULT] write single byte to chip
+ * @chip: NAND chip object
+ * @byte: value to write
+ *
+ * Default function to write a byte to I/O[7:0]
+ */
+static void nand_write_byte(struct nand_chip *chip, uint8_t byte)
+{
+ chip->legacy.write_buf(chip, &byte, 1);
+}
+
+/**
+ * nand_write_byte16 - [DEFAULT] write single byte to a chip with width 16
+ * @chip: NAND chip object
+ * @byte: value to write
+ *
+ * Default function to write a byte to I/O[7:0] on a 16-bit wide chip.
+ */
+static void nand_write_byte16(struct nand_chip *chip, uint8_t byte)
+{
+ uint16_t word = byte;
+
+ /*
+ * It's not entirely clear what should happen to I/O[15:8] when writing
+ * a byte. The ONFi spec (Revision 3.1; 2012-09-19, Section 2.16) reads:
+ *
+ * When the host supports a 16-bit bus width, only data is
+ * transferred at the 16-bit width. All address and command line
+ * transfers shall use only the lower 8-bits of the data bus. During
+ * command transfers, the host may place any value on the upper
+ * 8-bits of the data bus. During address transfers, the host shall
+ * set the upper 8-bits of the data bus to 00h.
+ *
+ * One user of the write_byte callback is nand_set_features. The
+ * four parameters are specified to be written to I/O[7:0], but this is
+ * neither an address nor a command transfer. Let's assume a 0 on the
+ * upper I/O lines is OK.
+ */
+ chip->legacy.write_buf(chip, (uint8_t *)&word, 2);
+}
+
+/**
+ * nand_write_buf - [DEFAULT] write buffer to chip
+ * @chip: NAND chip object
+ * @buf: data buffer
+ * @len: number of bytes to write
+ *
+ * Default write function for 8bit buswidth.
+ */
+static void nand_write_buf(struct nand_chip *chip, const uint8_t *buf, int len)
+{
+ iowrite8_rep(chip->legacy.IO_ADDR_W, buf, len);
+}
+
+/**
+ * nand_read_buf - [DEFAULT] read chip data into buffer
+ * @chip: NAND chip object
+ * @buf: buffer to store date
+ * @len: number of bytes to read
+ *
+ * Default read function for 8bit buswidth.
+ */
+static void nand_read_buf(struct nand_chip *chip, uint8_t *buf, int len)
+{
+ ioread8_rep(chip->legacy.IO_ADDR_R, buf, len);
+}
+
+/**
+ * nand_write_buf16 - [DEFAULT] write buffer to chip
+ * @chip: NAND chip object
+ * @buf: data buffer
+ * @len: number of bytes to write
+ *
+ * Default write function for 16bit buswidth.
+ */
+static void nand_write_buf16(struct nand_chip *chip, const uint8_t *buf,
+ int len)
+{
+ u16 *p = (u16 *) buf;
+
+ iowrite16_rep(chip->legacy.IO_ADDR_W, p, len >> 1);
+}
+
+/**
+ * nand_read_buf16 - [DEFAULT] read chip data into buffer
+ * @chip: NAND chip object
+ * @buf: buffer to store date
+ * @len: number of bytes to read
+ *
+ * Default read function for 16bit buswidth.
+ */
+static void nand_read_buf16(struct nand_chip *chip, uint8_t *buf, int len)
+{
+ u16 *p = (u16 *) buf;
+
+ ioread16_rep(chip->legacy.IO_ADDR_R, p, len >> 1);
+}
+
+/**
+ * panic_nand_wait_ready - [GENERIC] Wait for the ready pin after commands.
+ * @mtd: MTD device structure
+ * @timeo: Timeout
+ *
+ * Helper function for nand_wait_ready used when needing to wait in interrupt
+ * context.
+ */
+static void panic_nand_wait_ready(struct mtd_info *mtd, unsigned long timeo)
+{
+ struct nand_chip *chip = mtd_to_nand(mtd);
+ int i;
+
+ /* Wait for the device to get ready */
+ for (i = 0; i < timeo; i++) {
+ if (chip->legacy.dev_ready(chip))
+ break;
+ touch_softlockup_watchdog();
+ mdelay(1);
+ }
+}
+
+/**
+ * nand_wait_ready - [GENERIC] Wait for the ready pin after commands.
+ * @chip: NAND chip object
+ *
+ * Wait for the ready pin after a command, and warn if a timeout occurs.
+ */
+void nand_wait_ready(struct nand_chip *chip)
+{
+ struct mtd_info *mtd = nand_to_mtd(chip);
+ unsigned long timeo = 400;
+
+ if (in_interrupt() || oops_in_progress)
+ return panic_nand_wait_ready(mtd, timeo);
+
+ /* Wait until command is processed or timeout occurs */
+ timeo = jiffies + msecs_to_jiffies(timeo);
+ do {
+ if (chip->legacy.dev_ready(chip))
+ return;
+ cond_resched();
+ } while (time_before(jiffies, timeo));
+
+ if (!chip->legacy.dev_ready(chip))
+ pr_warn_ratelimited("timeout while waiting for chip to become ready\n");
+}
+EXPORT_SYMBOL_GPL(nand_wait_ready);
+
+/**
+ * nand_wait_status_ready - [GENERIC] Wait for the ready status after commands.
+ * @mtd: MTD device structure
+ * @timeo: Timeout in ms
+ *
+ * Wait for status ready (i.e. command done) or timeout.
+ */
+static void nand_wait_status_ready(struct mtd_info *mtd, unsigned long timeo)
+{
+ register struct nand_chip *chip = mtd_to_nand(mtd);
+ int ret;
+
+ timeo = jiffies + msecs_to_jiffies(timeo);
+ do {
+ u8 status;
+
+ ret = nand_read_data_op(chip, &status, sizeof(status), true);
+ if (ret)
+ return;
+
+ if (status & NAND_STATUS_READY)
+ break;
+ touch_softlockup_watchdog();
+ } while (time_before(jiffies, timeo));
+};
+
+/**
+ * nand_command - [DEFAULT] Send command to NAND device
+ * @chip: NAND chip object
+ * @command: the command to be sent
+ * @column: the column address for this command, -1 if none
+ * @page_addr: the page address for this command, -1 if none
+ *
+ * Send command to NAND device. This function is used for small page devices
+ * (512 Bytes per page).
+ */
+static void nand_command(struct nand_chip *chip, unsigned int command,
+ int column, int page_addr)
+{
+ struct mtd_info *mtd = nand_to_mtd(chip);
+ int ctrl = NAND_CTRL_CLE | NAND_CTRL_CHANGE;
+
+ /* Write out the command to the device */
+ if (command == NAND_CMD_SEQIN) {
+ int readcmd;
+
+ if (column >= mtd->writesize) {
+ /* OOB area */
+ column -= mtd->writesize;
+ readcmd = NAND_CMD_READOOB;
+ } else if (column < 256) {
+ /* First 256 bytes --> READ0 */
+ readcmd = NAND_CMD_READ0;
+ } else {
+ column -= 256;
+ readcmd = NAND_CMD_READ1;
+ }
+ chip->legacy.cmd_ctrl(chip, readcmd, ctrl);
+ ctrl &= ~NAND_CTRL_CHANGE;
+ }
+ if (command != NAND_CMD_NONE)
+ chip->legacy.cmd_ctrl(chip, command, ctrl);
+
+ /* Address cycle, when necessary */
+ ctrl = NAND_CTRL_ALE | NAND_CTRL_CHANGE;
+ /* Serially input address */
+ if (column != -1) {
+ /* Adjust columns for 16 bit buswidth */
+ if (chip->options & NAND_BUSWIDTH_16 &&
+ !nand_opcode_8bits(command))
+ column >>= 1;
+ chip->legacy.cmd_ctrl(chip, column, ctrl);
+ ctrl &= ~NAND_CTRL_CHANGE;
+ }
+ if (page_addr != -1) {
+ chip->legacy.cmd_ctrl(chip, page_addr, ctrl);
+ ctrl &= ~NAND_CTRL_CHANGE;
+ chip->legacy.cmd_ctrl(chip, page_addr >> 8, ctrl);
+ if (chip->options & NAND_ROW_ADDR_3)
+ chip->legacy.cmd_ctrl(chip, page_addr >> 16, ctrl);
+ }
+ chip->legacy.cmd_ctrl(chip, NAND_CMD_NONE,
+ NAND_NCE | NAND_CTRL_CHANGE);
+
+ /*
+ * Program and erase have their own busy handlers status and sequential
+ * in needs no delay
+ */
+ switch (command) {
+
+ case NAND_CMD_NONE:
+ case NAND_CMD_PAGEPROG:
+ case NAND_CMD_ERASE1:
+ case NAND_CMD_ERASE2:
+ case NAND_CMD_SEQIN:
+ case NAND_CMD_STATUS:
+ case NAND_CMD_READID:
+ case NAND_CMD_SET_FEATURES:
+ return;
+
+ case NAND_CMD_RESET:
+ if (chip->legacy.dev_ready)
+ break;
+ udelay(chip->legacy.chip_delay);
+ chip->legacy.cmd_ctrl(chip, NAND_CMD_STATUS,
+ NAND_CTRL_CLE | NAND_CTRL_CHANGE);
+ chip->legacy.cmd_ctrl(chip, NAND_CMD_NONE,
+ NAND_NCE | NAND_CTRL_CHANGE);
+ /* EZ-NAND can take upto 250ms as per ONFi v4.0 */
+ nand_wait_status_ready(mtd, 250);
+ return;
+
+ /* This applies to read commands */
+ case NAND_CMD_READ0:
+ /*
+ * READ0 is sometimes used to exit GET STATUS mode. When this
+ * is the case no address cycles are requested, and we can use
+ * this information to detect that we should not wait for the
+ * device to be ready.
+ */
+ if (column == -1 && page_addr == -1)
+ return;
+
+ default:
+ /*
+ * If we don't have access to the busy pin, we apply the given
+ * command delay
+ */
+ if (!chip->legacy.dev_ready) {
+ udelay(chip->legacy.chip_delay);
+ return;
+ }
+ }
+ /*
+ * Apply this short delay always to ensure that we do wait tWB in
+ * any case on any machine.
+ */
+ ndelay(100);
+
+ nand_wait_ready(chip);
+}
+
+static void nand_ccs_delay(struct nand_chip *chip)
+{
+ /*
+ * The controller already takes care of waiting for tCCS when the RNDIN
+ * or RNDOUT command is sent, return directly.
+ */
+ if (!(chip->options & NAND_WAIT_TCCS))
+ return;
+
+ /*
+ * Wait tCCS_min if it is correctly defined, otherwise wait 500ns
+ * (which should be safe for all NANDs).
+ */
+ if (chip->setup_data_interface)
+ ndelay(chip->data_interface.timings.sdr.tCCS_min / 1000);
+ else
+ ndelay(500);
+}
+
+/**
+ * nand_command_lp - [DEFAULT] Send command to NAND large page device
+ * @chip: NAND chip object
+ * @command: the command to be sent
+ * @column: the column address for this command, -1 if none
+ * @page_addr: the page address for this command, -1 if none
+ *
+ * Send command to NAND device. This is the version for the new large page
+ * devices. We don't have the separate regions as we have in the small page
+ * devices. We must emulate NAND_CMD_READOOB to keep the code compatible.
+ */
+static void nand_command_lp(struct nand_chip *chip, unsigned int command,
+ int column, int page_addr)
+{
+ struct mtd_info *mtd = nand_to_mtd(chip);
+
+ /* Emulate NAND_CMD_READOOB */
+ if (command == NAND_CMD_READOOB) {
+ column += mtd->writesize;
+ command = NAND_CMD_READ0;
+ }
+
+ /* Command latch cycle */
+ if (command != NAND_CMD_NONE)
+ chip->legacy.cmd_ctrl(chip, command,
+ NAND_NCE | NAND_CLE | NAND_CTRL_CHANGE);
+
+ if (column != -1 || page_addr != -1) {
+ int ctrl = NAND_CTRL_CHANGE | NAND_NCE | NAND_ALE;
+
+ /* Serially input address */
+ if (column != -1) {
+ /* Adjust columns for 16 bit buswidth */
+ if (chip->options & NAND_BUSWIDTH_16 &&
+ !nand_opcode_8bits(command))
+ column >>= 1;
+ chip->legacy.cmd_ctrl(chip, column, ctrl);
+ ctrl &= ~NAND_CTRL_CHANGE;
+
+ /* Only output a single addr cycle for 8bits opcodes. */
+ if (!nand_opcode_8bits(command))
+ chip->legacy.cmd_ctrl(chip, column >> 8, ctrl);
+ }
+ if (page_addr != -1) {
+ chip->legacy.cmd_ctrl(chip, page_addr, ctrl);
+ chip->legacy.cmd_ctrl(chip, page_addr >> 8,
+ NAND_NCE | NAND_ALE);
+ if (chip->options & NAND_ROW_ADDR_3)
+ chip->legacy.cmd_ctrl(chip, page_addr >> 16,
+ NAND_NCE | NAND_ALE);
+ }
+ }
+ chip->legacy.cmd_ctrl(chip, NAND_CMD_NONE,
+ NAND_NCE | NAND_CTRL_CHANGE);
+
+ /*
+ * Program and erase have their own busy handlers status, sequential
+ * in and status need no delay.
+ */
+ switch (command) {
+
+ case NAND_CMD_NONE:
+ case NAND_CMD_CACHEDPROG:
+ case NAND_CMD_PAGEPROG:
+ case NAND_CMD_ERASE1:
+ case NAND_CMD_ERASE2:
+ case NAND_CMD_SEQIN:
+ case NAND_CMD_STATUS:
+ case NAND_CMD_READID:
+ case NAND_CMD_SET_FEATURES:
+ return;
+
+ case NAND_CMD_RNDIN:
+ nand_ccs_delay(chip);
+ return;
+
+ case NAND_CMD_RESET:
+ if (chip->legacy.dev_ready)
+ break;
+ udelay(chip->legacy.chip_delay);
+ chip->legacy.cmd_ctrl(chip, NAND_CMD_STATUS,
+ NAND_NCE | NAND_CLE | NAND_CTRL_CHANGE);
+ chip->legacy.cmd_ctrl(chip, NAND_CMD_NONE,
+ NAND_NCE | NAND_CTRL_CHANGE);
+ /* EZ-NAND can take upto 250ms as per ONFi v4.0 */
+ nand_wait_status_ready(mtd, 250);
+ return;
+
+ case NAND_CMD_RNDOUT:
+ /* No ready / busy check necessary */
+ chip->legacy.cmd_ctrl(chip, NAND_CMD_RNDOUTSTART,
+ NAND_NCE | NAND_CLE | NAND_CTRL_CHANGE);
+ chip->legacy.cmd_ctrl(chip, NAND_CMD_NONE,
+ NAND_NCE | NAND_CTRL_CHANGE);
+
+ nand_ccs_delay(chip);
+ return;
+
+ case NAND_CMD_READ0:
+ /*
+ * READ0 is sometimes used to exit GET STATUS mode. When this
+ * is the case no address cycles are requested, and we can use
+ * this information to detect that READSTART should not be
+ * issued.
+ */
+ if (column == -1 && page_addr == -1)
+ return;
+
+ chip->legacy.cmd_ctrl(chip, NAND_CMD_READSTART,
+ NAND_NCE | NAND_CLE | NAND_CTRL_CHANGE);
+ chip->legacy.cmd_ctrl(chip, NAND_CMD_NONE,
+ NAND_NCE | NAND_CTRL_CHANGE);
+
+ /* This applies to read commands */
+ default:
+ /*
+ * If we don't have access to the busy pin, we apply the given
+ * command delay.
+ */
+ if (!chip->legacy.dev_ready) {
+ udelay(chip->legacy.chip_delay);
+ return;
+ }
+ }
+
+ /*
+ * Apply this short delay always to ensure that we do wait tWB in
+ * any case on any machine.
+ */
+ ndelay(100);
+
+ nand_wait_ready(chip);
+}
+
+/**
+ * nand_get_set_features_notsupp - set/get features stub returning -ENOTSUPP
+ * @chip: nand chip info structure
+ * @addr: feature address.
+ * @subfeature_param: the subfeature parameters, a four bytes array.
+ *
+ * Should be used by NAND controller drivers that do not support the SET/GET
+ * FEATURES operations.
+ */
+int nand_get_set_features_notsupp(struct nand_chip *chip, int addr,
+ u8 *subfeature_param)
+{
+ return -ENOTSUPP;
+}
+EXPORT_SYMBOL(nand_get_set_features_notsupp);
+
+/**
+ * nand_wait - [DEFAULT] wait until the command is done
+ * @mtd: MTD device structure
+ * @chip: NAND chip structure
+ *
+ * Wait for command done. This applies to erase and program only.
+ */
+static int nand_wait(struct nand_chip *chip)
+{
+
+ unsigned long timeo = 400;
+ u8 status;
+ int ret;
+
+ /*
+ * Apply this short delay always to ensure that we do wait tWB in any
+ * case on any machine.
+ */
+ ndelay(100);
+
+ ret = nand_status_op(chip, NULL);
+ if (ret)
+ return ret;
+
+ if (in_interrupt() || oops_in_progress)
+ panic_nand_wait(chip, timeo);
+ else {
+ timeo = jiffies + msecs_to_jiffies(timeo);
+ do {
+ if (chip->legacy.dev_ready) {
+ if (chip->legacy.dev_ready(chip))
+ break;
+ } else {
+ ret = nand_read_data_op(chip, &status,
+ sizeof(status), true);
+ if (ret)
+ return ret;
+
+ if (status & NAND_STATUS_READY)
+ break;
+ }
+ cond_resched();
+ } while (time_before(jiffies, timeo));
+ }
+
+ ret = nand_read_data_op(chip, &status, sizeof(status), true);
+ if (ret)
+ return ret;
+
+ /* This can happen if in case of timeout or buggy dev_ready */
+ WARN_ON(!(status & NAND_STATUS_READY));
+ return status;
+}
+
+void nand_legacy_set_defaults(struct nand_chip *chip)
+{
+ unsigned int busw = chip->options & NAND_BUSWIDTH_16;
+
+ if (chip->exec_op)
+ return;
+
+ /* check for proper chip_delay setup, set 20us if not */
+ if (!chip->legacy.chip_delay)
+ chip->legacy.chip_delay = 20;
+
+ /* check, if a user supplied command function given */
+ if (!chip->legacy.cmdfunc && !chip->exec_op)
+ chip->legacy.cmdfunc = nand_command;
+
+ /* check, if a user supplied wait function given */
+ if (chip->legacy.waitfunc == NULL)
+ chip->legacy.waitfunc = nand_wait;
+
+ if (!chip->select_chip)
+ chip->select_chip = nand_select_chip;
+
+ /* If called twice, pointers that depend on busw may need to be reset */
+ if (!chip->legacy.read_byte || chip->legacy.read_byte == nand_read_byte)
+ chip->legacy.read_byte = busw ? nand_read_byte16 : nand_read_byte;
+ if (!chip->legacy.write_buf || chip->legacy.write_buf == nand_write_buf)
+ chip->legacy.write_buf = busw ? nand_write_buf16 : nand_write_buf;
+ if (!chip->legacy.write_byte || chip->legacy.write_byte == nand_write_byte)
+ chip->legacy.write_byte = busw ? nand_write_byte16 : nand_write_byte;
+ if (!chip->legacy.read_buf || chip->legacy.read_buf == nand_read_buf)
+ chip->legacy.read_buf = busw ? nand_read_buf16 : nand_read_buf;
+}
+
+void nand_legacy_adjust_cmdfunc(struct nand_chip *chip)
+{
+ struct mtd_info *mtd = nand_to_mtd(chip);
+
+ /* Do not replace user supplied command function! */
+ if (mtd->writesize > 512 && chip->legacy.cmdfunc == nand_command)
+ chip->legacy.cmdfunc = nand_command_lp;
+}
+
+int nand_legacy_check_hooks(struct nand_chip *chip)
+{
+ /*
+ * ->legacy.cmdfunc() is legacy and will only be used if ->exec_op() is
+ * not populated.
+ */
+ if (chip->exec_op)
+ return 0;
+
+ /*
+ * Default functions assigned for ->legacy.cmdfunc() and
+ * ->select_chip() both expect ->legacy.cmd_ctrl() to be populated.
+ */
+ if ((!chip->legacy.cmdfunc || !chip->select_chip) &&
+ !chip->legacy.cmd_ctrl) {
+ pr_err("->legacy.cmd_ctrl() should be provided\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}