diff options
author | Douglas Anderson <dianders@chromium.org> | 2022-04-26 12:41:03 -0700 |
---|---|---|
committer | Bjorn Andersson <bjorn.andersson@linaro.org> | 2022-05-05 22:36:26 -0500 |
commit | 366a0a194b3b3e3e52bc7b7b1ac35b40a1187902 (patch) | |
tree | 3bc70d2c8406d4b8e77f22d7ef831210411550b0 | |
parent | 11a3f3dc2cf8d6127aae6183a69dcf3dde026305 (diff) | |
download | linux-366a0a194b3b3e3e52bc7b7b1ac35b40a1187902.tar.bz2 |
arm64: dts: qcom: sc7280: eDP for herobrine boards
Add eDP support to herobrine boards, splitting up amongst the
different files as makes sense. Rationale for the current split of
things:
* The eDP connector itself is on qcard. However, not all devices with
a qcard will use an eDP panel. Some might use MIPI and, presumably,
someone could build a device with qcard that had no display at all.
* The qcard provides a PWM for backlight that goes to the eDP
connector. This PWM is also provided to the board and it's expected
that it would be used as the backlight PWM even for herobrine
devices with MIPI displays.
* It's currently assumed that all herobrine boards will have some sort
of display, either MIPI or eDP (but not both).
* We will assume herobrine-rev1 has eDP. The schematics allow for a
MIPI panel to be hooked up but, aside from some testing, nobody is
doing this and most boards don't have all the parts stuffed for
it. The two panels would also share a PWM for backlight, which is
weird.
* herobrine-villager and herobrine-hoglin (crd) also have eDP.
* herobrine-hoglin (crd) has slightly different regulator setup for
the backlight. It's expected that this is unique to this board. See
comments in the dts file.
* There are some regulators that are defined in the qcard schematic
but provided by the board like "vreg_edp_bl" and
"vreg_edp_3p3". While we could put references to these regulators
straight in the qcard.dtsi file, this would force someone using
qcard that didn't provide those regulators to provide a dummy or do
an ugly /delete-node/. Instead, we'll add references in
herobrine.dtsi.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220426124053.v2.1.Iedd71976a78d53c301ce0134832de95a989c9195@changeid
5 files changed, 134 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts index b06f61e9b90b..a4ac33c4fd59 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts @@ -12,6 +12,27 @@ / { model = "Qualcomm Technologies, Inc. sc7280 CRD platform (rev5+)"; compatible = "google,hoglin", "qcom,sc7280"; + + /* FIXED REGULATORS */ + + /* + * On most herobrine boards PPVAR_SYS directly provides VREG_EDP_BL. + * However, on CRD there's an extra regulator in the way. Since this + * is expected to be uncommon, we'll leave the "vreg_edp_bl" label + * in the baseboard herobrine.dtsi point at "ppvar_sys" and then + * make a "_crd" specific version here. + */ + vreg_edp_bl_crd: vreg-edp-bl-crd-regulator { + compatible = "regulator-fixed"; + regulator-name = "vreg_edp_bl_crd"; + + gpio = <&pm8350c_gpios 6 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&edp_bl_reg_en>; + + vin-supply = <&ppvar_sys>; + }; }; /* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */ @@ -81,6 +102,14 @@ ap_ts_pen_1v8: &i2c13 { }; }; +&mdss_edp { + status = "okay"; +}; + +&mdss_edp_phy { + status = "okay"; +}; + /* For nvme */ &pcie1 { status = "okay"; @@ -91,6 +120,10 @@ ap_ts_pen_1v8: &i2c13 { status = "okay"; }; +&pm8350c_pwm_backlight { + power-supply = <&vreg_edp_bl_crd>; +}; + /* For eMMC */ &sdhc_1 { status = "okay"; @@ -121,6 +154,13 @@ ap_ts_pen_1v8: &i2c13 { "PMIC_EDP_BL_EN", "PMIC_EDP_BL_PWM", ""; + + edp_bl_reg_en: edp-bl-reg-en { + pins = "gpio6"; + function = "normal"; + bias-disable; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; + }; }; &tlmm { diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts index 29c4ca095294..b69ca09d9bfb 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts @@ -100,6 +100,14 @@ ts_i2c: &i2c13 { }; }; +&mdss_edp { + status = "okay"; +}; + +&mdss_edp_phy { + status = "okay"; +}; + /* For nvme */ &pcie1 { status = "okay"; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r0.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r0.dts index 6c2b9a14535a..d3d6ffad4eff 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r0.dts +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r0.dts @@ -58,6 +58,14 @@ ap_tp_i2c: &i2c0 { status = "okay"; }; +&mdss_edp { + status = "okay"; +}; + +&mdss_edp_phy { + status = "okay"; +}; + /* For nvme */ &pcie1 { status = "okay"; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi index d58045dd7334..9cb1bc8ed6b5 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi @@ -367,6 +367,11 @@ vreg_edp_3p3: &pp3300_left_in_mlb {}; /* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */ +&edp_panel { + /* Our board provides power to the qcard for the eDP panel. */ + power-supply = <&vreg_edp_3p3>; +}; + ap_sar_sensor_i2c: &i2c1 { clock-frequency = <400000>; status = "disabled"; @@ -420,6 +425,14 @@ ap_i2c_tpm: &i2c14 { }; }; +&mdss { + status = "okay"; +}; + +&mdss_mdp { + status = "okay"; +}; + /* NVMe drive, enabled on a per-board basis */ &pcie1 { pinctrl-names = "default"; @@ -429,6 +442,17 @@ ap_i2c_tpm: &i2c14 { vddpe-3v3-supply = <&pp3300_ssd>; }; +&pm8350c_pwm { + status = "okay"; +}; + +&pm8350c_pwm_backlight { + status = "okay"; + + /* Our board provides power to the qcard for the backlight */ + power-supply = <&vreg_edp_bl>; +}; + &pmk8350_rtc { status = "disabled"; }; diff --git a/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi b/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi index 98b5cd70bca5..d59002d4492e 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi @@ -29,6 +29,16 @@ serial0 = &uart5; serial1 = &uart7; }; + + pm8350c_pwm_backlight: backlight { + compatible = "pwm-backlight"; + status = "disabled"; + + enable-gpios = <&pm8350c_gpios 7 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_edp_bl_en>; + pwms = <&pm8350c_pwm 3 65535>; + }; }; &apps_rsc { @@ -293,11 +303,50 @@ modem-init; }; +/* NOTE: Not all Qcards have eDP connector stuffed */ +&mdss_edp { + vdda-0p9-supply = <&vdd_a_edp_0_0p9>; + vdda-1p2-supply = <&vdd_a_edp_0_1p2>; + + aux-bus { + edp_panel: panel { + compatible = "edp-panel"; + + backlight = <&pm8350c_pwm_backlight>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + edp_panel_in: endpoint { + remote-endpoint = <&mdss_edp_out>; + }; + }; + }; + }; + }; +}; + +&mdss_edp_out { + remote-endpoint = <&edp_panel_in>; +}; + +&mdss_edp_phy { + vdda-pll-supply = <&vdd_a_edp_0_0p9>; + vdda-phy-supply = <&vdd_a_edp_0_1p2>; +}; + &pcie1_phy { vdda-phy-supply = <&vreg_l10c_0p88>; vdda-pll-supply = <&vreg_l6b_1p2>; }; +&pm8350c_pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pmic_edp_bl_pwm>; +}; + &pmk8350_vadc { pmk8350-die-temp@3 { reg = <PMK8350_ADC7_DIE_TEMP>; @@ -383,6 +432,11 @@ mos_bt_uart: &uart7 { * baseboard or board device tree, not here. */ +/* No external pull for eDP HPD, so set the internal one. */ +&edp_hot_plug_det { + bias-pull-down; +}; + /* * For ts_i2c * |