diff options
author | Paulius Zaleckas <paulius.zaleckas@teltonika.lt> | 2009-03-25 11:18:50 +0200 |
---|---|---|
committer | Pierre Ossman <drzeus@drzeus.cx> | 2009-04-08 20:11:59 +0200 |
commit | 34b28950168abd7ad55fe3493ea21f1340c7294a (patch) | |
tree | 0db7097f68ffdbecfe7dcda4cbf31c25636ee9f2 | |
parent | b513b6cc0fcbb0ef733eec487618da7ea2d7cc61 (diff) | |
download | linux-34b28950168abd7ad55fe3493ea21f1340c7294a.tar.bz2 |
imxmmc: move RSSR BLR
DMA request source (RSSR) needs to be set only once (in probe).
DMA burst length (BLR) need to be set only in set_ios()
This cleans up imxmci_setup_data() and should make it a little
bit faster :)
Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
-rw-r--r-- | drivers/mmc/host/imxmmc.c | 10 |
1 files changed, 3 insertions, 7 deletions
diff --git a/drivers/mmc/host/imxmmc.c b/drivers/mmc/host/imxmmc.c index 0fa7af38919b..e0be21a4a696 100644 --- a/drivers/mmc/host/imxmmc.c +++ b/drivers/mmc/host/imxmmc.c @@ -307,13 +307,6 @@ static void imxmci_setup_data(struct imxmci_host *host, struct mmc_data *data) wmb(); - if (host->actual_bus_width == MMC_BUS_WIDTH_4) - BLR(host->dma) = 0; /* burst 64 byte read / 64 bytes write */ - else - BLR(host->dma) = 16; /* burst 16 byte read / 16 bytes write */ - - RSSR(host->dma) = DMA_REQ_SDHC; - set_bit(IMXMCI_PEND_DMA_DATA_b, &host->pending_events); clear_bit(IMXMCI_PEND_CPU_DATA_b, &host->pending_events); @@ -818,9 +811,11 @@ static void imxmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) if (ios->bus_width == MMC_BUS_WIDTH_4) { host->actual_bus_width = MMC_BUS_WIDTH_4; imx_gpio_mode(PB11_PF_SD_DAT3); + BLR(host->dma) = 0; /* burst 64 byte read/write */ } else { host->actual_bus_width = MMC_BUS_WIDTH_1; imx_gpio_mode(GPIO_PORTB | GPIO_IN | GPIO_PUEN | 11); + BLR(host->dma) = 16; /* burst 16 byte read/write */ } if (host->power_mode != ios->power_mode) { @@ -1034,6 +1029,7 @@ static int __init imxmci_probe(struct platform_device *pdev) } host->dma_allocated = 1; imx_dma_setup_handlers(host->dma, imxmci_dma_irq, NULL, host); + RSSR(host->dma) = DMA_REQ_SDHC; tasklet_init(&host->tasklet, imxmci_tasklet_fnc, (unsigned long)host); host->status_reg=0; |