bnxt: change receive ring space parameters

Modify ring header data split and jumbo parameters to account
for the fact that the design for XDP multibuffer puts close to
the first 4k of data in a page and the remaining portions of
the packet go in the aggregation ring.

v3: Simplified code around initial buffer size calculation

Signed-off-by: Andy Gospodarek <gospo@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

2 files changed, 28 insertions, 15 deletions

diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
index 6e1d43410e8c..2a919905f256 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -56,6 +56,7 @@
 #include <linux/hwmon.h>
 #include <linux/hwmon-sysfs.h>
 #include <net/page_pool.h>
+#include <linux/align.h>
 
 #include "bnxt_hsi.h"
 #include "bnxt.h"
@@ -1933,11 +1934,13 @@ static int bnxt_rx_pkt(struct bnxt *bp, struct bnxt_cp_ring_info *cpr,
 	}
 
 	if (agg_bufs) {
-		skb = bnxt_rx_agg_pages_skb(bp, cpr, skb, cp_cons, agg_bufs, false);
-		if (!skb) {
-			cpr->sw_stats.rx.rx_oom_discards += 1;
-			rc = -ENOMEM;
-			goto next_rx;
+		if (!xdp_active) {
+			skb = bnxt_rx_agg_pages_skb(bp, cpr, skb, cp_cons, agg_bufs, false);
+			if (!skb) {
+				cpr->sw_stats.rx.rx_oom_discards += 1;
+				rc = -ENOMEM;
+				goto next_rx;
+			}
 		}
 	}
 
@@ -3854,7 +3857,7 @@ void bnxt_set_ring_params(struct bnxt *bp)
 	/* 8 for CRC and VLAN */
 	rx_size = SKB_DATA_ALIGN(bp->dev->mtu + ETH_HLEN + NET_IP_ALIGN + 8);
 
-	rx_space = rx_size + NET_SKB_PAD +
+	rx_space = rx_size + ALIGN(max(NET_SKB_PAD, XDP_PACKET_HEADROOM), 8) +
 		SKB_DATA_ALIGN(sizeof(struct skb_shared_info));
 
 	bp->rx_copy_thresh = BNXT_RX_COPY_THRESH;
@@ -3895,9 +3898,15 @@ void bnxt_set_ring_params(struct bnxt *bp)
 		}
 		bp->rx_agg_ring_size = agg_ring_size;
 		bp->rx_agg_ring_mask = (bp->rx_agg_nr_pages * RX_DESC_CNT) - 1;
-		rx_size = SKB_DATA_ALIGN(BNXT_RX_COPY_THRESH + NET_IP_ALIGN);
-		rx_space = rx_size + NET_SKB_PAD +
-			SKB_DATA_ALIGN(sizeof(struct skb_shared_info));
+
+		if (BNXT_RX_PAGE_MODE(bp)) {
+			rx_space = BNXT_PAGE_MODE_BUF_SIZE;
+			rx_size = BNXT_MAX_PAGE_MODE_MTU;
+		} else {
+			rx_size = SKB_DATA_ALIGN(BNXT_RX_COPY_THRESH + NET_IP_ALIGN);
+			rx_space = rx_size + NET_SKB_PAD +
+				SKB_DATA_ALIGN(sizeof(struct skb_shared_info));
+		}
 	}
 
 	bp->rx_buf_use_size = rx_size;
@@ -5287,12 +5296,15 @@ static int bnxt_hwrm_vnic_set_hds(struct bnxt *bp, u16 vnic_id)
 	if (rc)
 		return rc;
 
-	req->flags = cpu_to_le32(VNIC_PLCMODES_CFG_REQ_FLAGS_JUMBO_PLACEMENT |
-				 VNIC_PLCMODES_CFG_REQ_FLAGS_HDS_IPV4 |
-				 VNIC_PLCMODES_CFG_REQ_FLAGS_HDS_IPV6);
-	req->enables =
-		cpu_to_le32(VNIC_PLCMODES_CFG_REQ_ENABLES_JUMBO_THRESH_VALID |
-			    VNIC_PLCMODES_CFG_REQ_ENABLES_HDS_THRESHOLD_VALID);
+	req->flags = cpu_to_le32(VNIC_PLCMODES_CFG_REQ_FLAGS_JUMBO_PLACEMENT);
+	req->enables = cpu_to_le32(VNIC_PLCMODES_CFG_REQ_ENABLES_JUMBO_THRESH_VALID);
+
+	if (BNXT_RX_PAGE_MODE(bp) && !BNXT_RX_JUMBO_MODE(bp)) {
+		req->flags |= cpu_to_le32(VNIC_PLCMODES_CFG_REQ_FLAGS_HDS_IPV4 |
+					  VNIC_PLCMODES_CFG_REQ_FLAGS_HDS_IPV6);
+		req->enables |=
+			cpu_to_le32(VNIC_PLCMODES_CFG_REQ_ENABLES_HDS_THRESHOLD_VALID);
+	}
 	/* thresholds not implemented in firmware yet */
 	req->jumbo_thresh = cpu_to_le16(bp->rx_copy_thresh);
 	req->hds_threshold = cpu_to_le16(bp->rx_copy_thresh);
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.h b/drivers/net/ethernet/broadcom/bnxt/bnxt.h
index 0f35459d5206..319d6851eecc 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.h
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.h
@@ -1819,6 +1819,7 @@ struct bnxt {
 #define BNXT_SUPPORTS_TPA(bp)	(!BNXT_CHIP_TYPE_NITRO_A0(bp) &&	\
 				 (!((bp)->flags & BNXT_FLAG_CHIP_P5) ||	\
 				  (bp)->max_tpa_v2) && !is_kdump_kernel())
+#define BNXT_RX_JUMBO_MODE(bp)	((bp)->flags & BNXT_FLAG_JUMBO)
 
 #define BNXT_CHIP_SR2(bp)			\
 	((bp)->chip_num == CHIP_NUM_58818)