diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2022-08-04 19:41:09 -0700 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2022-08-04 19:41:09 -0700 |
| commit | 328141e51e6fc79d21168bfd4e356dddc2ec7491 (patch) | |
| tree | d96dbb769f25332d17269339873617c350c8f799 | |
| parent | eff0cb3d91c06acbb957be1134a07afa2c4978e3 (diff) | |
| parent | 527f36f5efa45b6a897190cabf982e2d207887da (diff) | |
| download | linux-328141e51e6fc79d21168bfd4e356dddc2ec7491.tar.bz2 | |
Merge tag 'mmc-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC updates from Ulf Hansson:
"MMC core:
- Add support for the asynchronous SDIO wakeup interrupts
- Skip redundant evaluation of eMMC HS400 caps when no-MMC-cap
- Add support to store error stats from host drivers
- Extend debugfs to show error stats from host drivers
- Add single I/O read support in the recovery path for 4k sector cards
MMC host:
- dw_mmc-exynos: Convert corresponding DT bindings to the dtschema
- dw_mmc-rockchip: Add support for the Rockchip RV1126 variant
- mmc_spi: Convert corresponding DT bindings to the dtschema
- mtk-sd: Extend support for interrupts/pinctrls for SDIO low-power mode
- mtk-sd: Add support for SDIO wake irqs
- mtk-sd: Add support for the Mediatek MT8188 variant
- renesas_sdhi: Drop redundant manual tap correction for newer SoCs
- renesas_sdhi: Add support for the R-Car S4-8 and generic Gen4 variants
- sdhci/cqhci: Add support to capture stats from host errors
- sdhci-brcmstb: Add ability to increase max clock rate for SDIO on 72116b0
- sdhci-msm: Add support for the MSM8998 and SM8450 variant
- sdhci-of-at91: Fixup UHS-I mode by rewriting of MC1R
- sdhci-of-dwcmshc: Add support for the Rockchip rk3588 variant
- sdhci-of-dwcmshc: Enable reset support for the Rockchip variants
- sdhci-pci-gli: Improve I/O read/write performance for GL9763E
- sdhci-s3c: Convert corresponding DT bindings to the dtschema
- tmio: Avoid glitches when resetting
MEMSTICK core:
- A couple of minor fixes and cleanups"
* tag 'mmc-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (61 commits)
mmc: mediatek: add support for SDIO eint wakup IRQ
mmc: core: Add support for SDIO wakeup interrupt
dt-bindings: mmc: mtk-sd: extend interrupts and pinctrls properties
dt-bindings: mmc: rockchip-dw-mshc: Document Rockchip RV1126
mmc: renesas_sdhi: newer SoCs don't need manual tap correction
mmc: cavium-thunderx: Add of_node_put() when breaking out of loop
mmc: cavium-octeon: Add of_node_put() when breaking out of loop
mmc: core: quirks: Add of_node_put() when breaking out of loop
mmc: sdhci-brcmstb: use clk_get_rate(base_clk) in PM resume
dt-bindings: mmc: sdhci-msm: Document the SM8450 compatible
mmc: sdhci-msm: drop redundant of_device_id entries
dt-bindings: mmc: sdhci-msm: add MSM8998
mmc: block: Add single read for 4k sector cards
mmc: mxcmmc: Use mmc_card_sdio macro
mmc: core: Use mmc_card_* macro and add a new for the sd_combo type
dt-bindings: mmc: sdhci-msm: constrain reg-names per variants
dt-bindings: mmc: sdhci-msm: fix reg-names entries
dt-bindings: mmc: Add compatible for MediaTek MT8188
dt-bindings: mmc: sdhci-msm: document resets
mmc: sdhci-of-at91: fix set_uhs_signaling rewriting of MC1R
...
49 files changed, 1152 insertions, 362 deletions
diff --git a/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.yaml b/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.yaml index 5ecdac9de484..dead421e17d6 100644 --- a/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.yaml +++ b/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.yaml @@ -10,9 +10,6 @@ maintainers: - Al Cooper <alcooperx@gmail.com> - Florian Fainelli <f.fainelli@gmail.com> -allOf: - - $ref: mmc-controller.yaml# - properties: compatible: oneOf: @@ -42,23 +39,46 @@ properties: maxItems: 1 clocks: - maxItems: 1 - description: - handle to core clock for the sdhci controller. + minItems: 1 + items: + - description: handle to core clock for the sdhci controller + - description: handle to improved 150Mhz clock for sdhci controller (Optional clock) clock-names: + minItems: 1 items: - const: sw_sdio + - const: sdio_freq # Optional clock + + clock-frequency: + description: + Maximum operating frequency of sdio_freq sdhci controller clock + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 100000000 + maximum: 150000000 sdhci,auto-cmd12: type: boolean description: Specifies that controller should use auto CMD12 +allOf: + - $ref: mmc-controller.yaml# + - if: + properties: + clock-names: + contains: + const: sdio_freq + + then: + required: + - clock-frequency + required: - compatible - reg - interrupts - clocks + - clock-names unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt deleted file mode 100644 index 753e9d7d8956..000000000000 --- a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt +++ /dev/null @@ -1,94 +0,0 @@ -* Samsung Exynos specific extensions to the Synopsys Designware Mobile - Storage Host Controller - -The Synopsys designware mobile storage host controller is used to interface -a SoC with storage medium such as eMMC or SD/MMC cards. This file documents -differences between the core Synopsys dw mshc controller properties described -by synopsys-dw-mshc.txt and the properties used by the Samsung Exynos specific -extensions to the Synopsys Designware Mobile Storage Host Controller. - -Required Properties: - -* compatible: should be - - "samsung,exynos4210-dw-mshc": for controllers with Samsung Exynos4210 - specific extensions. - - "samsung,exynos4412-dw-mshc": for controllers with Samsung Exynos4412 - specific extensions. - - "samsung,exynos5250-dw-mshc": for controllers with Samsung Exynos5250 - specific extensions. - - "samsung,exynos5420-dw-mshc": for controllers with Samsung Exynos5420 - specific extensions. - - "samsung,exynos7-dw-mshc": for controllers with Samsung Exynos7 - specific extensions. - - "samsung,exynos7-dw-mshc-smu": for controllers with Samsung Exynos7 - specific extensions having an SMU. - - "axis,artpec8-dw-mshc": for controllers with ARTPEC-8 specific - extensions. - -* samsung,dw-mshc-ciu-div: Specifies the divider value for the card interface - unit (ciu) clock. This property is applicable only for Exynos5 SoC's and - ignored for Exynos4 SoC's. The valid range of divider value is 0 to 7. - -* samsung,dw-mshc-sdr-timing: Specifies the value of CIU clock phase shift value - in transmit mode and CIU clock phase shift value in receive mode for single - data rate mode operation. Refer notes below for the order of the cells and the - valid values. - -* samsung,dw-mshc-ddr-timing: Specifies the value of CUI clock phase shift value - in transmit mode and CIU clock phase shift value in receive mode for double - data rate mode operation. Refer notes below for the order of the cells and the - valid values. -* samsung,dw-mshc-hs400-timing: Specifies the value of CIU TX and RX clock phase - shift value for hs400 mode operation. - - Notes for the sdr-timing and ddr-timing values: - - The order of the cells should be - - First Cell: CIU clock phase shift value for tx mode. - - Second Cell: CIU clock phase shift value for rx mode. - - Valid values for SDR and DDR CIU clock timing for Exynos5250: - - valid value for tx phase shift and rx phase shift is 0 to 7. - - when CIU clock divider value is set to 3, all possible 8 phase shift - values can be used. - - if CIU clock divider value is 0 (that is divide by 1), both tx and rx - phase shift clocks should be 0. - -* samsung,read-strobe-delay: RCLK (Data strobe) delay to control HS400 mode - (Latency value for delay line in Read path) - -Required properties for a slot (Deprecated - Recommend to use one slot per host): - -* gpios: specifies a list of gpios used for command, clock and data bus. The - first gpio is the command line and the second gpio is the clock line. The - rest of the gpios (depending on the bus-width property) are the data lines in - no particular order. The format of the gpio specifier depends on the gpio - controller. -(Deprecated - Refer to Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt) - -Example: - - The MSHC controller node can be split into two portions, SoC specific and - board specific portions as listed below. - - dwmmc0@12200000 { - compatible = "samsung,exynos5250-dw-mshc"; - reg = <0x12200000 0x1000>; - interrupts = <0 75 0>; - #address-cells = <1>; - #size-cells = <0>; - }; - - dwmmc0@12200000 { - cap-mmc-highspeed; - cap-sd-highspeed; - broken-cd; - fifo-depth = <0x80>; - card-detect-delay = <200>; - samsung,dw-mshc-ciu-div = <3>; - samsung,dw-mshc-sdr-timing = <2 3>; - samsung,dw-mshc-ddr-timing = <1 2>; - samsung,dw-mshc-hs400-timing = <0 2>; - samsung,read-strobe-delay = <90>; - bus-width = <8>; - }; diff --git a/Documentation/devicetree/bindings/mmc/mmc-spi-slot.txt b/Documentation/devicetree/bindings/mmc/mmc-spi-slot.txt deleted file mode 100644 index 5e74db69f581..000000000000 --- a/Documentation/devicetree/bindings/mmc/mmc-spi-slot.txt +++ /dev/null @@ -1,29 +0,0 @@ -MMC/SD/SDIO slot directly connected to a SPI bus - -This file documents differences between the core properties described -by mmc.txt and the properties used by the mmc_spi driver. - -Required properties: -- spi-max-frequency : maximum frequency for this device (Hz). - -Optional properties: -- voltage-ranges : two cells are required, first cell specifies minimum - slot voltage (mV), second cell specifies maximum slot voltage (mV). - Several ranges could be specified. If not provided, 3.2v..3.4v is assumed. -- gpios : may specify GPIOs in this order: Card-Detect GPIO, - Write-Protect GPIO. Note that this does not follow the - binding from mmc.txt, for historical reasons. - -Example: - - mmc-slot@0 { - compatible = "fsl,mpc8323rdb-mmc-slot", - "mmc-spi-slot"; - reg = <0>; - gpios = <&qe_pio_d 14 1 - &qe_pio_d 15 0>; - voltage-ranges = <3300 3300>; - spi-max-frequency = <50000000>; - interrupts = <42>; - interrupt-parent = <&PIC>; - }; diff --git a/Documentation/devicetree/bindings/mmc/mmc-spi-slot.yaml b/Documentation/devicetree/bindings/mmc/mmc-spi-slot.yaml new file mode 100644 index 000000000000..c45b91099325 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/mmc-spi-slot.yaml @@ -0,0 +1,77 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mmc/mmc-spi-slot.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MMC/SD/SDIO slot directly connected to a SPI bus + +maintainers: + - Ulf Hansson <ulf.hansson@linaro.org> + +allOf: + - $ref: "mmc-controller.yaml" + - $ref: /schemas/spi/spi-peripheral-props.yaml + +description: | + The extra properties used by an mmc connected via SPI. + +properties: + compatible: + const: mmc-spi-slot + + reg: + maxItems: 1 + + spi-max-frequency: true + + interrupts: + maxItems: 1 + + voltage-ranges: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: | + Two cells are required, first cell specifies minimum slot voltage (mV), + second cell specifies maximum slot voltage (mV). + items: + - description: | + value for minimum slot voltage in mV + default: 3200 + - description: | + value for maximum slot voltage in mV + default: 3400 + + gpios: + description: | + For historical reasons, this does not follow the generic mmc-controller + binding. + minItems: 1 + items: + - description: Card-Detect GPIO + - description: Write-Protect GPIO + +required: + - compatible + - reg + - spi-max-frequency + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + spi { + #address-cells = <1>; + #size-cells = <0>; + mmc@0 { + compatible = "mmc-spi-slot"; + reg = <0>; + gpios = <&gpio 14 GPIO_ACTIVE_LOW>, <&gpio 15 GPIO_ACTIVE_HIGH>; + voltage-ranges = <3300 3300>; + spi-max-frequency = <50000000>; + interrupts = <42>; + interrupt-parent = <&PIC>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.yaml b/Documentation/devicetree/bindings/mmc/mtk-sd.yaml index 2a2e9fa8c188..083d1ec2f661 100644 --- a/Documentation/devicetree/bindings/mmc/mtk-sd.yaml +++ b/Documentation/devicetree/bindings/mmc/mtk-sd.yaml @@ -30,13 +30,11 @@ properties: - const: mediatek,mt7623-mmc - const: mediatek,mt2701-mmc - items: - - const: mediatek,mt8186-mmc - - const: mediatek,mt8183-mmc - - items: - - const: mediatek,mt8192-mmc - - const: mediatek,mt8183-mmc - - items: - - const: mediatek,mt8195-mmc + - enum: + - mediatek,mt8186-mmc + - mediatek,mt8188-mmc + - mediatek,mt8192-mmc + - mediatek,mt8195-mmc - const: mediatek,mt8183-mmc reg: @@ -72,12 +70,27 @@ properties: - const: ahb_cg interrupts: - maxItems: 1 + description: + Should at least contain MSDC GIC interrupt. To support SDIO in-band wakeup, an extended + interrupt is required and be configured as wakeup source irq. + minItems: 1 + maxItems: 2 + + interrupt-names: + items: + - const: msdc + - const: sdio_wakeup pinctrl-names: + description: + Should at least contain default and state_uhs. To support SDIO in-band wakeup, dat1 pin + will be switched between GPIO mode and SDIO DAT1 mode, state_eint is mandatory in this + scenario. + minItems: 2 items: - const: default - const: state_uhs + - const: state_eint pinctrl-0: description: @@ -89,6 +102,11 @@ properties: should contain uhs mode pin ctrl. maxItems: 1 + pinctrl-2: + description: + should switch dat1 pin to GPIO mode. + maxItems: 1 + assigned-clocks: description: PLL of the source clock. @@ -208,4 +226,32 @@ examples: mediatek,hs400-cmd-resp-sel-rising; }; + mmc3: mmc@11260000 { + compatible = "mediatek,mt8173-mmc"; + reg = <0x11260000 0x1000>; + clock-names = "source", "hclk"; + clocks = <&pericfg CLK_PERI_MSDC30_3>, + <&topckgen CLK_TOP_MSDC50_2_H_SEL>; + interrupt-names = "msdc", "sdio_wakeup"; + interrupts-extended = <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_LOW 0>, + <&pio 23 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default", "state_uhs", "state_eint"; + pinctrl-0 = <&mmc2_pins_default>; + pinctrl-1 = <&mmc2_pins_uhs>; + pinctrl-2 = <&mmc2_pins_eint>; + bus-width = <4>; + max-frequency = <200000000>; + cap-sd-highspeed; + sd-uhs-sdr104; + keep-power-in-suspend; + wakeup-source; + cap-sdio-irq; + no-mmc; + no-sd; + non-removable; + vmmc-supply = <&sdio_fixed_3v3>; + vqmmc-supply = <&mt6397_vgp3_reg>; + mmc-pwrseq = <&wifi_pwrseq>; + }; + ... diff --git a/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml b/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml index 9ac4986988c5..14945ebc31d2 100644 --- a/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml +++ b/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml @@ -56,11 +56,15 @@ properties: - renesas,sdhi-r8a77980 # R-Car V3H - renesas,sdhi-r8a77990 # R-Car E3 - renesas,sdhi-r8a77995 # R-Car D3 - - renesas,sdhi-r8a779a0 # R-Car V3U - renesas,sdhi-r9a07g043 # RZ/G2UL - renesas,sdhi-r9a07g044 # RZ/G2{L,LC} - renesas,sdhi-r9a07g054 # RZ/V2L - const: renesas,rcar-gen3-sdhi # R-Car Gen3 or RZ/G2 + - items: + - enum: + - renesas,sdhi-r8a779a0 # R-Car V3U + - renesas,sdhi-r8a779f0 # R-Car S4-8 + - const: renesas,rcar-gen4-sdhi # R-Car Gen4 reg: maxItems: 1 @@ -141,6 +145,7 @@ allOf: enum: - renesas,rcar-gen2-sdhi - renesas,rcar-gen3-sdhi + - renesas,rcar-gen4-sdhi then: properties: clocks: diff --git a/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml b/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml index 54fb59820d2b..8d888b435817 100644 --- a/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml +++ b/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml @@ -39,6 +39,7 @@ properties: - rockchip,rk3399-dw-mshc - rockchip,rk3568-dw-mshc - rockchip,rv1108-dw-mshc + - rockchip,rv1126-dw-mshc - const: rockchip,rk3288-dw-mshc reg: diff --git a/Documentation/devicetree/bindings/mmc/samsung,exynos-dw-mshc.yaml b/Documentation/devicetree/bindings/mmc/samsung,exynos-dw-mshc.yaml new file mode 100644 index 000000000000..fdaa18481aa0 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/samsung,exynos-dw-mshc.yaml @@ -0,0 +1,160 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mmc/samsung,exynos-dw-mshc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: + Samsung Exynos SoC specific extensions to the Synopsys Designware Mobile + Storage Host Controller + +maintainers: + - Jaehoon Chung <jh80.chung@samsung.com> + - Krzysztof Kozlowski <krzk@kernel.org> + +properties: + compatible: + enum: + - samsung,exynos4210-dw-mshc + - samsung,exynos4412-dw-mshc + - samsung,exynos5250-dw-mshc + - samsung,exynos5420-dw-mshc + - samsung,exynos5420-dw-mshc-smu + - samsung,exynos7-dw-mshc + - samsung,exynos7-dw-mshc-smu + - axis,artpec8-dw-mshc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 2 + description: + Handle to "biu" and "ciu" clocks for the + bus interface unit clock and the card interface unit clock. + + clock-names: + items: + - const: biu + - const: ciu + + samsung,dw-mshc-ciu-div: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 7 + description: + The divider value for the card interface unit (ciu) clock. + + samsung,dw-mshc-ddr-timing: + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - description: CIU clock phase shift value for tx mode + minimum: 0 + maximum: 7 + - description: CIU clock phase shift value for rx mode + minimum: 0 + maximum: 7 + description: + The value of CUI clock phase shift value in transmit mode and CIU clock + phase shift value in receive mode for double data rate mode operation. + See also samsung,dw-mshc-hs400-timing property. + + samsung,dw-mshc-hs400-timing: + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - description: CIU clock phase shift value for tx mode + minimum: 0 + maximum: 7 + - description: CIU clock phase shift value for rx mode + minimum: 0 + maximum: 7 + description: | + The value of CIU TX and RX clock phase shift value for HS400 mode + operation. + Valid values for SDR and DDR CIU clock timing:: + - valid value for tx phase shift and rx phase shift is 0 to 7. + - when CIU clock divider value is set to 3, all possible 8 phase shift + values can be used. + - if CIU clock divider value is 0 (that is divide by 1), both tx and rx + phase shift clocks should be 0. + If missing, values from samsung,dw-mshc-ddr-timing property are used. + + samsung,dw-mshc-sdr-timing: + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - description: CIU clock phase shift value for tx mode + minimum: 0 + maximum: 7 + - description: CIU clock phase shift value for rx mode + minimum: 0 + maximum: 7 + description: + The value of CIU clock phase shift value in transmit mode and CIU clock + phase shift value in receive mode for single data rate mode operation. + See also samsung,dw-mshc-hs400-timing property. + + samsung,read-strobe-delay: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + RCLK (Data strobe) delay to control HS400 mode (Latency value for delay + line in Read path). If missing, default from hardware is used. + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - samsung,dw-mshc-ddr-timing + - samsung,dw-mshc-sdr-timing + +allOf: + - $ref: "synopsys-dw-mshc-common.yaml#" + - if: + properties: + compatible: + contains: + enum: + - samsung,exynos5250-dw-mshc + - samsung,exynos5420-dw-mshc + - samsung,exynos7-dw-mshc + - samsung,exynos7-dw-mshc-smu + - axis,artpec8-dw-mshc + then: + required: + - samsung,dw-mshc-ciu-div + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/exynos5420.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + mmc@12220000 { + compatible = "samsung,exynos5420-dw-mshc"; + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x12220000 0x1000>; + clocks = <&clock CLK_MMC2>, <&clock CLK_SCLK_MMC2>; + clock-names = "biu", "ciu"; + fifo-depth = <0x40>; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <0 4>; + samsung,dw-mshc-ddr-timing = <0 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_wp &sd2_bus1 &sd2_bus4>; + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <200000000>; + vmmc-supply = <&ldo19_reg>; + vqmmc-supply = <&ldo13_reg>; + sd-uhs-sdr50; + sd-uhs-sdr104; + sd-uhs-ddr50; + }; diff --git a/Documentation/devicetree/bindings/mmc/samsung,s3c6410-sdhci.yaml b/Documentation/devicetree/bindings/mmc/samsung,s3c6410-sdhci.yaml new file mode 100644 index 000000000000..5d873a60f650 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/samsung,s3c6410-sdhci.yaml @@ -0,0 +1,81 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mmc/samsung,s3c6410-sdhci.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung SoC SDHCI Controller + +maintainers: + - Jaehoon Chung <jh80.chung@samsung.com> + - Krzysztof Kozlowski <krzk@kernel.org> + +properties: + compatible: + enum: + - samsung,s3c6410-sdhci + - samsung,exynos4210-sdhci + + reg: + maxItems: 1 + + clocks: + minItems: 2 + maxItems: 5 + + clock-names: + minItems: 2 + items: + - const: hsmmc + - pattern: "^mmc_busclk.[0-3]$" + - pattern: "^mmc_busclk.[0-3]$" + - pattern: "^mmc_busclk.[0-3]$" + - pattern: "^mmc_busclk.[0-3]$" + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +allOf: + - $ref: mmc-controller.yaml# + - if: + properties: + compatible: + contains: + enum: + - samsung,exynos4210-sdhci + then: + properties: + clocks: + maxItems: 2 + clock-names: + items: + - const: hsmmc + - const: mmc_busclk.2 + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/exynos4.h> + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + mmc@12510000 { + compatible = "samsung,exynos4210-sdhci"; + reg = <0x12510000 0x100>; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_SDMMC0>, <&clock CLK_SCLK_MMC0>; + clock-names = "hsmmc", "mmc_busclk.2"; + bus-width = <4>; + cd-gpios = <&gpx3 4 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sdhci2_cd>; + pinctrl-names = "default"; + vmmc-supply = <&ldo21_reg>; + }; diff --git a/Documentation/devicetree/bindings/mmc/samsung-sdhci.txt b/Documentation/devicetree/bindings/mmc/samsung-sdhci.txt deleted file mode 100644 index 42e0a9afa100..000000000000 --- a/Documentation/devicetree/bindings/mmc/samsung-sdhci.txt +++ /dev/null @@ -1,32 +0,0 @@ -* Samsung's SDHCI Controller device tree bindings - -Samsung's SDHCI controller is used as a connectivity interface with external -MMC, SD and eMMC storage mediums. This file documents differences between the -core mmc properties described by mmc.txt and the properties used by the -Samsung implementation of the SDHCI controller. - -Required SoC Specific Properties: -- compatible: should be one of the following - - "samsung,s3c6410-sdhci": For controllers compatible with s3c6410 sdhci - controller. - - "samsung,exynos4210-sdhci": For controllers compatible with Exynos4 sdhci - controller. - -Required Board Specific Properties: -- pinctrl-0: Should specify pin control groups used for this controller. -- pinctrl-names: Should contain only one value - "default". - -Example: - sdhci@12530000 { - compatible = "samsung,exynos4210-sdhci"; - reg = <0x12530000 0x100>; - interrupts = <0 75 0>; - bus-width = <4>; - cd-gpios = <&gpk2 2 0>; - pinctrl-names = "default"; - pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4>; - }; - - Note: This example shows both SoC specific and board specific properties - in a single device node. The properties can be actually be separated - into SoC specific node and board specific node. diff --git a/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml b/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml index e4236334e748..b00578ae1dea 100644 --- a/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml +++ b/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml @@ -17,6 +17,9 @@ description: properties: compatible: oneOf: + - enum: + - qcom,sdhci-msm-v4 + deprecated: true - items: - enum: - qcom,apq8084-sdhci @@ -27,6 +30,10 @@ properties: - qcom,msm8992-sdhci - qcom,msm8994-sdhci - qcom,msm8996-sdhci + - qcom,msm8998-sdhci + - const: qcom,sdhci-msm-v4 # for sdcc versions less than 5.0 + - items: + - enum: - qcom,qcs404-sdhci - qcom,sc7180-sdhci - qcom,sc7280-sdhci @@ -38,20 +45,16 @@ properties: - qcom,sm6350-sdhci - qcom,sm8150-sdhci - qcom,sm8250-sdhci - - enum: - - qcom,sdhci-msm-v4 # for sdcc versions less than 5.0 - - qcom,sdhci-msm-v5 # for sdcc version 5.0 - - items: - - const: qcom,sdhci-msm-v4 # Deprecated (only for backward compatibility) - # for sdcc versions less than 5.0 + - qcom,sm8450-sdhci + - const: qcom,sdhci-msm-v5 # for sdcc version 5.0 reg: minItems: 1 - items: - - description: Host controller register map - - description: SD Core register map - - description: CQE register map - - description: Inline Crypto Engine register map + maxItems: 4 + + reg-names: + minItems: 1 + maxItems: 4 clocks: minItems: 3 @@ -93,6 +96,9 @@ properties: description: Should specify pin control groups used for this controller. + resets: + maxItems: 1 + qcom,ddr-config: $ref: /schemas/types.yaml#/definitions/uint32 description: platform specific settings for DDR_CONFIG reg. @@ -121,6 +127,16 @@ properties: description: A phandle to sdhci power domain node maxItems: 1 + mmc-ddr-1_8v: true + + mmc-hs200-1_8v: true + + mmc-hs400-1_8v: true + + bus-width: true + + max-frequency: true + patternProperties: '^opp-table(-[a-z0-9]+)?$': if: @@ -140,7 +156,47 @@ required: - clock-names - interrupts -additionalProperties: true +allOf: + - $ref: mmc-controller.yaml# + + - if: + properties: + compatible: + contains: + enum: + - qcom,sdhci-msm-v4 + then: + properties: + reg: + minItems: 2 + items: + - description: Host controller register map + - description: SD Core register map + - description: CQE register map + - description: Inline Crypto Engine register map + reg-names: + minItems: 2 + items: + - const: hc + - const: core + - const: cqhci + - const: ice + else: + properties: + reg: + minItems: 1 + items: + - description: Host controller register map + - description: CQE register map + - description: Inline Crypto Engine register map + reg-names: + minItems: 1 + items: + - const: hc + - const: cqhci + - const: ice + +unevaluatedProperties: false examples: - | @@ -149,7 +205,7 @@ examples: #include <dt-bindings/clock/qcom,rpmh.h> #include <dt-bindings/power/qcom-rpmpd.h> - sdhc_2: sdhci@8804000 { + sdhc_2: mmc@8804000 { compatible = "qcom,sm8250-sdhci", "qcom,sdhci-msm-v5"; reg = <0 0x08804000 0 0x1000>; diff --git a/drivers/memstick/core/ms_block.c b/drivers/memstick/core/ms_block.c index ed9a683b3ca8..ba8414519515 100644 --- a/drivers/memstick/core/ms_block.c +++ b/drivers/memstick/core/ms_block.c @@ -1341,17 +1341,17 @@ static int msb_ftl_initialize(struct msb_data *msb) msb->zone_count = msb->block_count / MS_BLOCKS_IN_ZONE; msb->logical_block_count = msb->zone_count * 496 - 2; - msb->used_blocks_bitmap = kzalloc(msb->block_count / 8, GFP_KERNEL); - msb->erased_blocks_bitmap = kzalloc(msb->block_count / 8, GFP_KERNEL); + msb->used_blocks_bitmap = bitmap_zalloc(msb->block_count, GFP_KERNEL); + msb->erased_blocks_bitmap = bitmap_zalloc(msb->block_count, GFP_KERNEL); msb->lba_to_pba_table = kmalloc_array(msb->logical_block_count, sizeof(u16), GFP_KERNEL); if (!msb->used_blocks_bitmap || !msb->lba_to_pba_table || !msb->erased_blocks_bitmap) { - kfree(msb->used_blocks_bitmap); + bitmap_free(msb->used_blocks_bitmap); + bitmap_free(msb->erased_blocks_bitmap); kfree(msb->lba_to_pba_table); - kfree(msb->erased_blocks_bitmap); return -ENOMEM; } @@ -1946,7 +1946,8 @@ static DEFINE_MUTEX(msb_disk_lock); /* protects against races in open/release */ static void msb_data_clear(struct msb_data *msb) { kfree(msb->boot_page); - kfree(msb->used_blocks_bitmap); + bitmap_free(msb->used_blocks_bitmap); + bitmap_free(msb->erased_blocks_bitmap); kfree(msb->lba_to_pba_table); kfree(msb->cache); msb->card = NULL; @@ -2243,8 +2244,8 @@ static int msb_resume(struct memstick_dev *card) goto out; if (msb->block_count != new_msb->block_count || - memcmp(msb->used_blocks_bitmap, new_msb->used_blocks_bitmap, - msb->block_count / 8)) + !bitmap_equal(msb->used_blocks_bitmap, new_msb->used_blocks_bitmap, + msb->block_count)) goto out; card_dead = false; diff --git a/drivers/mmc/core/block.c b/drivers/mmc/core/block.c index e08e22f0a7c5..ce89611a136e 100644 --- a/drivers/mmc/core/block.c +++ b/drivers/mmc/core/block.c @@ -176,7 +176,7 @@ static inline int mmc_blk_part_switch(struct mmc_card *card, unsigned int part_type); static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq, struct mmc_card *card, - int disable_multi, + int recovery_mode, struct mmc_queue *mq); static void mmc_blk_hsq_req_done(struct mmc_request *mrq); @@ -1302,7 +1302,7 @@ static void mmc_blk_eval_resp_error(struct mmc_blk_request *brq) } static void mmc_blk_data_prep(struct mmc_queue *mq, struct mmc_queue_req *mqrq, - int disable_multi, bool *do_rel_wr_p, + int recovery_mode, bool *do_rel_wr_p, bool *do_data_tag_p) { struct mmc_blk_data *md = mq->blkdata; @@ -1368,12 +1368,12 @@ static void mmc_blk_data_prep(struct mmc_queue *mq, struct mmc_queue_req *mqrq, brq->data.blocks--; /* - * After a read error, we redo the request one sector + * After a read error, we redo the request one (native) sector * at a time in order to accurately determine which * sectors can be read successfully. */ - if (disable_multi) - brq->data.blocks = 1; + if (recovery_mode) + brq->data.blocks = queue_physical_block_size(mq->queue) >> 9; /* * Some controllers have HW issues while operating @@ -1590,7 +1590,7 @@ static int mmc_blk_cqe_issue_rw_rq(struct mmc_queue *mq, struct request *req) static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq, struct mmc_card *card, - int disable_multi, + int recovery_mode, struct mmc_queue *mq) { u32 readcmd, writecmd; @@ -1599,7 +1599,7 @@ static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq, struct mmc_blk_data *md = mq->blkdata; bool do_rel_wr, do_data_tag; - mmc_blk_data_prep(mq, mqrq, disable_multi, &do_rel_wr, &do_data_tag); + mmc_blk_data_prep(mq, mqrq, recovery_mode, &do_rel_wr, &do_data_tag); brq->mrq.cmd = &brq->cmd; @@ -1690,7 +1690,7 @@ static int mmc_blk_fix_state(struct mmc_card *card, struct request *req) #define MMC_READ_SINGLE_RETRIES 2 -/* Single sector read during recovery */ +/* Single (native) sector read during recovery */ static void mmc_blk_read_single(struct mmc_queue *mq, struct request *req) { struct mmc_queue_req *mqrq = req_to_mmc_queue_req(req); @@ -1698,6 +1698,7 @@ static void mmc_blk_read_single(struct mmc_queue *mq, struct request *req) struct mmc_card *card = mq->card; struct mmc_host *host = card->host; blk_status_t error = BLK_STS_OK; + size_t bytes_per_read = queue_physical_block_size(mq->queue); do { u32 status; @@ -1732,13 +1733,13 @@ static void mmc_blk_read_single(struct mmc_queue *mq, struct request *req) else error = BLK_STS_OK; - } while (blk_update_request(req, error, 512)); + } while (blk_update_request(req, error, bytes_per_read)); return; error_exit: mrq->data->bytes_xfered = 0; - blk_update_request(req, BLK_STS_IOERR, 512); + blk_update_request(req, BLK_STS_IOERR, bytes_per_read); /* Let it try the remaining request again */ if (mqrq->retries > MMC_MAX_RETRIES - 1) mqrq->retries = MMC_MAX_RETRIES - 1; @@ -1879,10 +1880,9 @@ static void mmc_blk_mq_rw_recovery(struct mmc_queue *mq, struct request *req) return; } - /* FIXME: Missing single sector read for large sector size */ - if (!mmc_large_sector(card) && rq_data_dir(req) == READ && - brq->data.blocks > 1) { - /* Read one sector at a time */ + if (rq_data_dir(req) == READ && brq->data.blocks > + queue_physical_block_size(mq->queue) >> 9) { + /* Read one (native) sector at a time */ mmc_blk_read_single(mq, req); return; } @@ -2988,7 +2988,7 @@ static int mmc_blk_probe(struct mmc_card *card) * Don't enable runtime PM for SD-combo cards here. Leave that * decision to be taken during the SDIO init sequence instead. */ - if (card->type != MMC_TYPE_SD_COMBO) { + if (!mmc_card_sd_combo(card)) { pm_runtime_set_active(&card->dev); pm_runtime_enable(&card->dev); } @@ -3015,7 +3015,7 @@ static void mmc_blk_remove(struct mmc_card *card) mmc_blk_part_switch(card, md->part_type); mmc_release_host(card->host); } - if (card->type != MMC_TYPE_SD_COMBO) + if (!mmc_card_sd_combo(card)) pm_runtime_disable(&card->dev); pm_runtime_put_noidle(&card->dev); mmc_blk_remove_req(md); diff --git a/drivers/mmc/core/bus.c b/drivers/mmc/core/bus.c index 58a60afa650b..d8762fa3d5cd 100644 --- a/drivers/mmc/core/bus.c +++ b/drivers/mmc/core/bus.c @@ -85,7 +85,7 @@ mmc_bus_uevent(struct device *dev, struct kobj_uevent_env *env) return retval; } - if (card->type == MMC_TYPE_SDIO || card->type == MMC_TYPE_SD_COMBO) { + if (mmc_card_sdio(card) || mmc_card_sd_combo(card)) { retval = add_uevent_var(env, "SDIO_ID=%04X:%04X", card->cis.vendor, card->cis.device); if (retval) @@ -107,7 +107,7 @@ mmc_bus_uevent(struct device *dev, struct kobj_uevent_env *env) * SDIO (non-combo) cards are not handled by mmc_block driver and do not * have accessible CID register which used by mmc_card_name() function. */ - if (card->type == MMC_TYPE_SDIO) + if (mmc_card_sdio(card)) return 0; retval = add_uevent_var(env, "MMC_NAME=%s", mmc_card_name(card)); diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c index 4b70cbfc6d5d..ef53a2578824 100644 --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c @@ -943,9 +943,11 @@ int mmc_execute_tuning(struct mmc_card *card) } /* Only print error when we don't check for card removal */ - if (!host->detect_change) + if (!host->detect_change) { pr_err("%s: tuning execution failed: %d\n", mmc_hostname(host), err); + mmc_debugfs_err_stats_inc(host, MMC_ERR_TUNING); + } return err; } @@ -2244,6 +2246,12 @@ void mmc_rescan(struct work_struct *work) if (freqs[i] <= host->f_min) break; } + + /* + * Ignore the command timeout errors observed during + * the card init as those are excepted. + */ + host->err_stats[MMC_ERR_CMD_TIMEOUT] = 0; mmc_release_host(host); out: diff --git a/drivers/mmc/core/debugfs.c b/drivers/mmc/core/debugfs.c index 3fdbc801e64a..fe6808771bc7 100644 --- a/drivers/mmc/core/debugfs.c +++ b/drivers/mmc/core/debugfs.c @@ -223,6 +223,81 @@ static int mmc_clock_opt_set(void *data, u64 val) DEFINE_DEBUGFS_ATTRIBUTE(mmc_clock_fops, mmc_clock_opt_get, mmc_clock_opt_set, "%llu\n"); +static int mmc_err_state_get(void *data, u64 *val) +{ + struct mmc_host *host = data; + int i; + + if (!host) + return -EINVAL; + + *val = 0; + for (i = 0; i < MMC_ERR_MAX; i++) { + if (host->err_stats[i]) { + *val = 1; + break; + } + } + + return 0; +} + +DEFINE_DEBUGFS_ATTRIBUTE(mmc_err_state, mmc_err_state_get, NULL, "%llu\n"); + +static int mmc_err_stats_show(struct seq_file *file, void *data) +{ + struct mmc_host *host = (struct mmc_host *)file->private; + const char *desc[MMC_ERR_MAX] = { + [MMC_ERR_CMD_TIMEOUT] = "Command Timeout Occurred", + [MMC_ERR_CMD_CRC] = "Command CRC Errors Occurred", + [MMC_ERR_DAT_TIMEOUT] = "Data Timeout Occurred", + [MMC_ERR_DAT_CRC] = "Data CRC Errors Occurred", + [MMC_ERR_AUTO_CMD] = "Auto-Cmd Error Occurred", + [MMC_ERR_ADMA] = "ADMA Error Occurred", + [MMC_ERR_TUNING] = "Tuning Error Occurred", + [MMC_ERR_CMDQ_RED] = "CMDQ RED Errors", + [MMC_ERR_CMDQ_GCE] = "CMDQ GCE Errors", + [MMC_ERR_CMDQ_ICCE] = "CMDQ ICCE Errors", + [MMC_ERR_REQ_TIMEOUT] = "Request Timedout", + [MMC_ERR_CMDQ_REQ_TIMEOUT] = "CMDQ Request Timedout", + [MMC_ERR_ICE_CFG] = "ICE Config Errors", + [MMC_ERR_CTRL_TIMEOUT] = "Controller Timedout errors", + [MMC_ERR_UNEXPECTED_IRQ] = "Unexpected IRQ errors", + }; + int i; + + for (i = 0; i < MMC_ERR_MAX; i++) { + if (desc[i]) + seq_printf(file, "# %s:\t %d\n", + desc[i], host->err_stats[i]); + } + + return 0; +} + +static int mmc_err_stats_open(struct inode *inode, struct file *file) +{ + return single_open(file, mmc_err_stats_show, inode->i_private); +} + +static ssize_t mmc_err_stats_write(struct file *filp, const char __user *ubuf, + size_t cnt, loff_t *ppos) +{ + struct mmc_host *host = filp->f_mapping->host->i_private; + + pr_debug("%s: Resetting MMC error statistics\n", __func__); + memset(host->err_stats, 0, sizeof(host->err_stats)); + + return cnt; +} + +static const struct file_operations mmc_err_stats_fops = { + .open = mmc_err_stats_open, + .read = seq_read, + .write = mmc_err_stats_write, + .release = single_release, +}; + void mmc_add_host_debugfs(struct mmc_host *host) { struct dentry *root; @@ -236,6 +311,11 @@ void mmc_add_host_debugfs(struct mmc_host *host) debugfs_create_file_unsafe("clock", S_IRUSR | S_IWUSR, root, host, &mmc_clock_fops); + debugfs_create_file_unsafe("err_state", 0600, root, host, + &mmc_err_state); + debugfs_create_file("err_stats", 0600, root, host, + &mmc_err_stats_fops); + #ifdef CONFIG_FAIL_MMC_REQUEST if (fail_request) setup_fault_attr(&fail_default_attr, fail_request); diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c index 2ed2b4d5e5a5..0fd91f749b3a 100644 --- a/drivers/mmc/core/host.c +++ b/drivers/mmc/core/host.c @@ -599,7 +599,7 @@ static int mmc_validate_host_caps(struct mmc_host *host) } if (caps2 & (MMC_CAP2_HS400_ES | MMC_CAP2_HS400) && - !(caps & MMC_CAP_8_BIT_DATA)) { + !(caps & MMC_CAP_8_BIT_DATA) && !(caps2 & MMC_CAP2_NO_MMC)) { dev_warn(dev, "drop HS400 support since no 8-bit bus\n"); host->caps2 = caps2 & ~MMC_CAP2_HS400_ES & ~MMC_CAP2_HS400; } diff --git a/drivers/mmc/core/quirks.h b/drivers/mmc/core/quirks.h index f879dc63d936..be4393988086 100644 --- a/drivers/mmc/core/quirks.h +++ b/drivers/mmc/core/quirks.h @@ -163,8 +163,10 @@ static inline bool mmc_fixup_of_compatible_match(struct mmc_card *card, struct device_node *np; for_each_child_of_node(mmc_dev(card->host)->of_node, np) { - if (of_device_is_compatible(np, compatible)) + if (of_device_is_compatible(np, compatible)) { + of_node_put(np); return true; + } } return false; diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c index c5f1df6ce4c0..cee4c0b59f43 100644 --- a/drivers/mmc/core/sd.c +++ b/drivers/mmc/core/sd.c @@ -793,7 +793,7 @@ static umode_t sd_std_is_visible(struct kobject *kobj, struct attribute *attr, attr == &dev_attr_info2.attr || attr == &dev_attr_info3.attr || attr == &dev_attr_info4.attr - ) && card->type != MMC_TYPE_SD_COMBO) + ) &&!mmc_card_sd_combo(card)) return 0; return attr->mode; @@ -870,7 +870,7 @@ try_again: * the CCS bit is set as well. We deliberately deviate from the spec in * regards to this, which allows UHS-I to be supported for SDSC cards. */ - if (!mmc_host_is_spi(host) && rocr && (*rocr & 0x01000000)) { + if (!mmc_host_is_spi(host) && rocr && (*rocr & SD_ROCR_S18A)) { err = mmc_set_uhs_voltage(host, pocr); if (err == -EAGAIN) { retries--; diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c index 25799accf8a0..0b682a31cd3e 100644 --- a/drivers/mmc/core/sdio.c +++ b/drivers/mmc/core/sdio.c @@ -226,6 +226,20 @@ static int sdio_read_cccr(struct mmc_card *card, u32 ocr) card->sw_caps.sd3_drv_type |= SD_DRIVER_TYPE_C; if (data & SDIO_DRIVE_SDTD) card->sw_caps.sd3_drv_type |= SD_DRIVER_TYPE_D; + + ret = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_INTERRUPT_EXT, 0, &data); + if (ret) + goto out; + + if (data & SDIO_INTERRUPT_EXT_SAI) { + data |= SDIO_INTERRUPT_EXT_EAI; + ret = mmc_io_rw_direct(card, 1, 0, SDIO_CCCR_INTERRUPT_EXT, + data, NULL); + if (ret) + goto out; + + card->cccr.enable_async_irq = 1; + } } /* if no uhs mode ensure we check for high speed */ @@ -335,7 +349,7 @@ static int sdio_disable_4bit_bus(struct mmc_card *card) { int err; - if (card->type == MMC_TYPE_SDIO) + if (mmc_card_sdio(card)) goto out; if (!(card->host->caps & MMC_CAP_4_BIT_DATA)) @@ -360,7 +374,7 @@ static int sdio_enable_4bit_bus(struct mmc_card *card) err = sdio_enable_wide(card); if (err <= 0) return err; - if (card->type == MMC_TYPE_SDIO) + if (mmc_card_sdio(card)) goto out; if (card->scr.bus_widths & SD_SCR_BUS_WIDTH_4) { @@ -415,7 +429,7 @@ static int sdio_enable_hs(struct mmc_card *card) int ret; ret = mmc_sdio_switch_hs(card, true); - if (ret <= 0 || card->type == MMC_TYPE_SDIO) + if (ret <= 0 || mmc_card_sdio(card)) return ret; ret = mmc_sd_switch_hs(card); @@ -441,7 +455,7 @@ static unsigned mmc_sdio_get_max_clock(struct mmc_card *card) max_dtr = card->cis.max_dtr; } - if (card->type == MMC_TYPE_SD_COMBO) + if (mmc_card_sd_combo(card)) max_dtr = min(max_dtr, mmc_sd_get_max_clock(card)); return max_dtr; @@ -689,7 +703,7 @@ try_again: mmc_sd_get_cid(host, ocr & rocr, card->raw_cid, NULL) == 0) { card->type = MMC_TYPE_SD_COMBO; - if (oldcard && (oldcard->type != MMC_TYPE_SD_COMBO || + if (oldcard && (!mmc_card_sd_combo(oldcard) || memcmp(card->raw_cid, oldcard->raw_cid, sizeof(card->raw_cid)) != 0)) { err = -ENOENT; goto mismatch; @@ -697,7 +711,7 @@ try_again: } else { card->type = MMC_TYPE_SDIO; - if (oldcard && oldcard->type != MMC_TYPE_SDIO) { + if (oldcard && !mmc_card_sdio(oldcard)) { err = -ENOENT; goto mismatch; } @@ -754,7 +768,7 @@ try_again: /* * Read CSD, before selecting the card */ - if (!oldcard && card->type == MMC_TYPE_SD_COMBO) { + if (!oldcard && mmc_card_sd_combo(card)) { err = mmc_sd_get_csd(card); if (err) goto remove; @@ -827,7 +841,7 @@ try_again: mmc_fixup_device(card, sdio_fixup_methods); - if (card->type == MMC_TYPE_SD_COMBO) { + if (mmc_card_sd_combo(card)) { err = mmc_sd_setup_card(host, card, oldcard != NULL); /* handle as SDIO-only card if memory init failed */ if (err) { diff --git a/drivers/mmc/host/cavium-octeon.c b/drivers/mmc/host/cavium-octeon.c index 2c4b2df52adb..12dca91a8ef6 100644 --- a/drivers/mmc/host/cavium-octeon.c +++ b/drivers/mmc/host/cavium-octeon.c @@ -277,6 +277,7 @@ static int octeon_mmc_probe(struct platform_device *pdev) if (ret) { dev_err(&pdev->dev, "Error populating slots\n"); octeon_mmc_set_shared_power(host, 0); + of_node_put(cn); goto error; } i++; diff --git a/drivers/mmc/host/cavium-thunderx.c b/drivers/mmc/host/cavium-thunderx.c index 76013bbbcff3..202b1d6da678 100644 --- a/drivers/mmc/host/cavium-thunderx.c +++ b/drivers/mmc/host/cavium-thunderx.c @@ -142,8 +142,10 @@ static int thunder_mmc_probe(struct pci_dev *pdev, continue; ret = cvm_mmc_of_slot_probe(&host->slot_pdev[i]->dev, host); - if (ret) + if (ret) { + of_node_put(child_node); goto error; + } } i++; } diff --git a/drivers/mmc/host/cqhci-core.c b/drivers/mmc/host/cqhci-core.c index b0d30c35c390..b3d7d6d8d654 100644 --- a/drivers/mmc/host/cqhci-core.c +++ b/drivers/mmc/host/cqhci-core.c @@ -822,8 +822,15 @@ irqreturn_t cqhci_irq(struct mmc_host *mmc, u32 intmask, int cmd_error, pr_debug("%s: cqhci: IRQ status: 0x%08x\n", mmc_hostname(mmc), status); if ((status & (CQHCI_IS_RED | CQHCI_IS_GCE | CQHCI_IS_ICCE)) || - cmd_error || data_error) + cmd_error || data_error) { + if (status & CQHCI_IS_RED) + mmc_debugfs_err_stats_inc(mmc, MMC_ERR_CMDQ_RED); + if (status & CQHCI_IS_GCE) + mmc_debugfs_err_stats_inc(mmc, MMC_ERR_CMDQ_GCE); + if (status & CQHCI_IS_ICCE) + mmc_debugfs_err_stats_inc(mmc, MMC_ERR_CMDQ_ICCE); cqhci_error_irq(mmc, status, cmd_error, data_error); + } if (status & CQHCI_IS_TCC) { /* read TCN and complete the request */ diff --git a/drivers/mmc/host/dw_mmc-exynos.c b/drivers/mmc/host/dw_mmc-exynos.c index ca5be4445ae0..9f20ac524c8b 100644 --- a/drivers/mmc/host/dw_mmc-exynos.c +++ b/drivers/mmc/host/dw_mmc-exynos.c @@ -670,7 +670,9 @@ static int dw_mci_exynos_remove(struct platform_device *pdev) pm_runtime_set_suspended(&pdev->dev); pm_runtime_put_noidle(&pdev->dev); - return dw_mci_pltfm_remove(pdev); + dw_mci_pltfm_remove(pdev); + + return 0; } static const struct dev_pm_ops dw_mci_exynos_pmops = { diff --git a/drivers/mmc/host/dw_mmc-hi3798cv200.c b/drivers/mmc/host/dw_mmc-hi3798cv200.c index e9437ef8ef19..6f22fe054087 100644 --- a/drivers/mmc/host/dw_mmc-hi3798cv200.c +++ b/drivers/mmc/host/dw_mmc-hi3798cv200.c @@ -179,7 +179,9 @@ static int dw_mci_hi3798cv200_remove(struct platform_device *pdev) clk_disable_unprepare(priv->drive_clk); clk_disable_unprepare(priv->sample_clk); - return dw_mci_pltfm_remove(pdev); + dw_mci_pltfm_remove(pdev); + + return 0; } static const struct of_device_id dw_mci_hi3798cv200_match[] = { diff --git a/drivers/mmc/host/dw_mmc-rockchip.c b/drivers/mmc/host/dw_mmc-rockchip.c index f825487aa739..2a99f15f527f 100644 --- a/drivers/mmc/host/dw_mmc-rockchip.c +++ b/drivers/mmc/host/dw_mmc-rockchip.c @@ -377,7 +377,9 @@ static int dw_mci_rockchip_remove(struct platform_device *pdev) pm_runtime_disable(&pdev->dev); pm_runtime_put_noidle(&pdev->dev); - return dw_mci_pltfm_remove(pdev); + dw_mci_pltfm_remove(pdev); + + return 0; } static const struct dev_pm_ops dw_mci_rockchip_dev_pm_ops = { diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index 01159eaf8694..012aa85489d8 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -762,7 +762,7 @@ int mmci_dmae_setup(struct mmci_host *host) /* * If only an RX channel is specified, the driver will - * attempt to use it bidirectionally, however if it is + * attempt to use it bidirectionally, however if it * is specified but cannot be located, DMA will be disabled. */ if (dmae->rx_channel && !dmae->tx_channel) diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c index 9da4489dc345..4ff73d1883de 100644 --- a/drivers/mmc/host/mtk-sd.c +++ b/drivers/mmc/host/mtk-sd.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (c) 2014-2015 MediaTek Inc. + * Copyright (c) 2014-2015, 2022 MediaTek Inc. * Author: Chaotian.Jing <chaotian.jing@mediatek.com> */ @@ -20,6 +20,7 @@ #include <linux/platform_device.h> #include <linux/pm.h> #include <linux/pm_runtime.h> +#include <linux/pm_wakeirq.h> #include <linux/regulator/consumer.h> #include <linux/slab.h> #include <linux/spinlock.h> @@ -440,8 +441,10 @@ struct msdc_host { struct pinctrl *pinctrl; struct pinctrl_state *pins_default; struct pinctrl_state *pins_uhs; + struct pinctrl_state *pins_eint; struct delayed_work req_timeout; int irq; /* host interrupt */ + int eint_irq; /* interrupt from sdio device for waking up system */ struct reset_control *reset; struct clk *src_clk; /* msdc source clock */ @@ -1521,17 +1524,46 @@ static void __msdc_enable_sdio_irq(struct msdc_host *host, int enb) static void msdc_enable_sdio_irq(struct mmc_host *mmc, int enb) { - unsigned long flags; struct msdc_host *host = mmc_priv(mmc); + unsigned long flags; + int ret; spin_lock_irqsave(&host->lock, flags); __msdc_enable_sdio_irq(host, enb); spin_unlock_irqrestore(&host->lock, flags); - if (enb) - pm_runtime_get_noresume(host->dev); - else - pm_runtime_put_noidle(host->dev); + if (mmc_card_enable_async_irq(mmc->card) && host->pins_eint) { + if (enb) { + /* + * In dev_pm_set_dedicated_wake_irq_reverse(), eint pin will be set to + * GPIO mode. We need to restore it to SDIO DAT1 mode after that. + * Since the current pinstate is pins_uhs, to ensure pinctrl select take + * affect successfully, we change the pinstate to pins_eint firstly. + */ + pinctrl_select_state(host->pinctrl, host->pins_eint); + ret = dev_pm_set_dedicated_wake_irq_reverse(host->dev, host->eint_irq); + + if (ret) { + dev_err(host->dev, "Failed to register SDIO wakeup irq!\n"); + host->pins_eint = NULL; + pm_runtime_get_noresume(host->dev); + } else { + dev_dbg(host->dev, "SDIO eint irq: %d!\n", host->eint_irq); + } + + pinctrl_select_state(host->pinctrl, host->pins_uhs); + } else { + dev_pm_clear_wake_irq(host->dev); + } + } else { + if (enb) { + /* Ensure host->pins_eint is NULL */ + host->pins_eint = NULL; + pm_runtime_get_noresume(host->dev); + } else { + pm_runtime_put_noidle(host->dev); + } + } } static irqreturn_t msdc_cmdq_irq(struct msdc_host *host, u32 intsts) @@ -2319,7 +2351,7 @@ static int msdc_execute_hs400_tuning(struct mmc_host *mmc, struct mmc_card *card else val = readl(host->base + PAD_DS_TUNE); - dev_info(host->dev, "Fianl PAD_DS_TUNE: 0x%x\n", val); + dev_info(host->dev, "Final PAD_DS_TUNE: 0x%x\n", val); return 0; @@ -2635,6 +2667,20 @@ static int msdc_drv_probe(struct platform_device *pdev) goto host_free; } + /* Support for SDIO eint irq ? */ + if ((mmc->pm_caps & MMC_PM_WAKE_SDIO_IRQ) && (mmc->pm_caps & MMC_PM_KEEP_POWER)) { + host->eint_irq = platform_get_irq_byname(pdev, "sdio_wakeup"); + if (host->eint_irq > 0) { + host->pins_eint = pinctrl_lookup_state(host->pinctrl, "state_eint"); + if (IS_ERR(host->pins_eint)) { + dev_err(&pdev->dev, "Cannot find pinctrl eint!\n"); + host->pins_eint = NULL; + } else { + device_init_wakeup(&pdev->dev, true); + } + } + } + msdc_of_property_parse(pdev, host); host->dev = &pdev->dev; @@ -2849,6 +2895,15 @@ static int __maybe_unused msdc_runtime_suspend(struct device *dev) struct msdc_host *host = mmc_priv(mmc); msdc_save_reg(host); + + if (sdio_irq_claimed(mmc)) { + if (host->pins_eint) { + disable_irq(host->irq); + pinctrl_select_state(host->pinctrl, host->pins_eint); + } + + __msdc_enable_sdio_irq(host, 0); + } msdc_gate_clock(host); return 0; } @@ -2864,12 +2919,18 @@ static int __maybe_unused msdc_runtime_resume(struct device *dev) return ret; msdc_restore_reg(host); + + if (sdio_irq_claimed(mmc) && host->pins_eint) { + pinctrl_select_state(host->pinctrl, host->pins_uhs); + enable_irq(host->irq); + } return 0; } static int __maybe_unused msdc_suspend(struct device *dev) { struct mmc_host *mmc = dev_get_drvdata(dev); + struct msdc_host *host = mmc_priv(mmc); int ret; if (mmc->caps2 & MMC_CAP2_CQE) { @@ -2878,11 +2939,24 @@ static int __maybe_unused msdc_suspend(struct device *dev) return ret; } + /* + * Bump up runtime PM usage counter otherwise dev->power.needs_force_resume will + * not be marked as 1, pm_runtime_force_resume() will go out directly. + */ + if (sdio_irq_claimed(mmc) && host->pins_eint) + pm_runtime_get_noresume(dev); + return pm_runtime_force_suspend(dev); } static int __maybe_unused msdc_resume(struct device *dev) { + struct mmc_host *mmc = dev_get_drvdata(dev); + struct msdc_host *host = mmc_priv(mmc); + + if (sdio_irq_claimed(mmc) && host->pins_eint) + pm_runtime_put_noidle(dev); + return pm_runtime_force_resume(dev); } diff --git a/drivers/mmc/host/mxcmmc.c b/drivers/mmc/host/mxcmmc.c index de04b5afef2e..2cf0413407ea 100644 --- a/drivers/mmc/host/mxcmmc.c +++ b/drivers/mmc/host/mxcmmc.c @@ -923,7 +923,7 @@ static void mxcmci_init_card(struct mmc_host *host, struct mmc_card *card) * One way to prevent this is to only allow 1-bit transfers. */ - if (is_imx31_mmc(mxcmci) && card->type == MMC_TYPE_SDIO) + if (is_imx31_mmc(mxcmci) && mmc_card_sdio(card)) host->caps &= ~MMC_CAP_4_BIT_DATA; else host->caps |= MMC_CAP_4_BIT_DATA; @@ -1025,7 +1025,7 @@ static int mxcmci_probe(struct platform_device *pdev) mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count; mmc->max_seg_size = mmc->max_req_size; - host->devtype = (enum mxcmci_type)of_device_get_match_data(&pdev->dev); + host->devtype = (uintptr_t)of_device_get_match_data(&pdev->dev); /* adjust max_segs after devtype detection */ if (!is_mpc512x_mmc(host)) diff --git a/drivers/mmc/host/renesas_sdhi.h b/drivers/mmc/host/renesas_sdhi.h index 1a1e3e020a8c..c4abfee1ebae 100644 --- a/drivers/mmc/host/renesas_sdhi.h +++ b/drivers/mmc/host/renesas_sdhi.h @@ -43,6 +43,7 @@ struct renesas_sdhi_quirks { bool hs400_4taps; bool fixed_addr_mode; bool dma_one_rx_only; + bool manual_tap_correction; u32 hs400_bad_taps; const u8 (*hs400_calib_table)[SDHI_CALIB_TABLE_MAX]; }; diff --git a/drivers/mmc/host/renesas_sdhi_core.c b/drivers/mmc/host/renesas_sdhi_core.c index 4404ca1f98d8..6edbf5c161ab 100644 --- a/drivers/mmc/host/renesas_sdhi_core.c +++ b/drivers/mmc/host/renesas_sdhi_core.c @@ -49,9 +49,6 @@ #define HOST_MODE_GEN3_32BIT (HOST_MODE_GEN3_WMODE | HOST_MODE_GEN3_BUSWIDTH) #define HOST_MODE_GEN3_64BIT 0 -#define CTL_SDIF_MODE 0xe6 -#define SDIF_MODE_HS400 BIT(0) - #define SDHI_VER_GEN2_SDR50 0x490c #define SDHI_VER_RZ_A1 0x820b /* very old datasheets said 0x490c for SDR104, too. They are wrong! */ @@ -383,8 +380,7 @@ static void renesas_sdhi_hs400_complete(struct mmc_host *mmc) sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_DT2FF, priv->scc_tappos_hs400); - /* Gen3 can't do automatic tap correction with HS400, so disable it */ - if (sd_ctrl_read16(host, CTL_VERSION) == SDHI_VER_GEN3_SDMMC) + if (priv->quirks && priv->quirks->manual_tap_correction) sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_RVSCNTL, ~SH_MOBILE_SDHI_SCC_RVSCNTL_RVSEN & sd_scc_read32(host, priv, SH_MOBILE_SDHI_SCC_RVSCNTL)); @@ -562,23 +558,25 @@ static void renesas_sdhi_scc_reset(struct tmio_mmc_host *host, struct renesas_sd } /* only populated for TMIO_MMC_MIN_RCAR2 */ -static void renesas_sdhi_reset(struct tmio_mmc_host *host) +static void renesas_sdhi_reset(struct tmio_mmc_host *host, bool preserve) { struct renesas_sdhi *priv = host_to_priv(host); int ret; u16 val; - if (priv->rstc) { - reset_control_reset(priv->rstc); - /* Unknown why but without polling reset status, it will hang */ - read_poll_timeout(reset_control_status, ret, ret == 0, 1, 100, - false, priv->rstc); - /* At least SDHI_VER_GEN2_SDR50 needs manual release of reset */ - sd_ctrl_write16(host, CTL_RESET_SD, 0x0001); - priv->needs_adjust_hs400 = false; - renesas_sdhi_set_clock(host, host->clk_cache); - } else if (priv->scc_ctl) { - renesas_sdhi_scc_reset(host, priv); + if (!preserve) { + if (priv->rstc) { + reset_control_reset(priv->rstc); + /* Unknown why but without polling reset status, it will hang */ + read_poll_timeout(reset_control_status, ret, ret == 0, 1, 100, + false, priv->rstc); + /* At least SDHI_VER_GEN2_SDR50 needs manual release of reset */ + sd_ctrl_write16(host, CTL_RESET_SD, 0x0001); + priv->needs_adjust_hs400 = false; + renesas_sdhi_set_clock(host, host->clk_cache); + } else if (priv->scc_ctl) { + renesas_sdhi_scc_reset(host, priv); + } } if (sd_ctrl_read16(host, CTL_VERSION) >= SDHI_VER_GEN3_SD) { @@ -719,7 +717,7 @@ static bool renesas_sdhi_manual_correction(struct tmio_mmc_host *host, bool use_ sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_RVSREQ, 0); /* Change TAP position according to correction status */ - if (sd_ctrl_read16(host, CTL_VERSION) == SDHI_VER_GEN3_SDMMC && + if (priv->quirks && priv->quirks->manual_tap_correction && host->mmc->ios.timing == MMC_TIMING_MMC_HS400) { u32 bad_taps = priv->quirks ? priv->quirks->hs400_bad_taps : 0; /* @@ -938,6 +936,10 @@ int renesas_sdhi_probe(struct platform_device *pdev, if (IS_ERR(priv->clk_cd)) return dev_err_probe(&pdev->dev, PTR_ERR(priv->clk_cd), "cannot get cd clock"); + priv->rstc = devm_reset_control_get_optional_exclusive(&pdev->dev, NULL); + if (IS_ERR(priv->rstc)) + return PTR_ERR(priv->rstc); + priv->pinctrl = devm_pinctrl_get(&pdev->dev); if (!IS_ERR(priv->pinctrl)) { priv->pins_default = pinctrl_lookup_state(priv->pinctrl, @@ -1030,10 +1032,6 @@ int renesas_sdhi_probe(struct platform_device *pdev, if (ret) goto efree; - priv->rstc = devm_reset_control_get_optional_exclusive(&pdev->dev, NULL); - if (IS_ERR(priv->rstc)) - return PTR_ERR(priv->rstc); - ver = sd_ctrl_read16(host, CTL_VERSION); /* GEN2_SDR104 is first known SDHI to use 32bit block count */ if (ver < SDHI_VER_GEN2_SDR104 && mmc_data->max_blk_count > U16_MAX) diff --git a/drivers/mmc/host/renesas_sdhi_internal_dmac.c b/drivers/mmc/host/renesas_sdhi_internal_dmac.c index 3084b15ae2cb..42937596c4c4 100644 --- a/drivers/mmc/host/renesas_sdhi_internal_dmac.c +++ b/drivers/mmc/host/renesas_sdhi_internal_dmac.c @@ -170,6 +170,7 @@ static const struct renesas_sdhi_quirks sdhi_quirks_4tap_nohs400_one_rx = { static const struct renesas_sdhi_quirks sdhi_quirks_4tap = { .hs400_4taps = true, .hs400_bad_taps = BIT(2) | BIT(3) | BIT(6) | BIT(7), + .manual_tap_correction = true, }; static const struct renesas_sdhi_quirks sdhi_quirks_nohs400 = { @@ -182,25 +183,30 @@ static const struct renesas_sdhi_quirks sdhi_quirks_fixed_addr = { static const struct renesas_sdhi_quirks sdhi_quirks_bad_taps1357 = { .hs400_bad_taps = BIT(1) | BIT(3) | BIT(5) | BIT(7), + .manual_tap_correction = true, }; static const struct renesas_sdhi_quirks sdhi_quirks_bad_taps2367 = { .hs400_bad_taps = BIT(2) | BIT(3) | BIT(6) | BIT(7), + .manual_tap_correction = true, }; static const struct renesas_sdhi_quirks sdhi_quirks_r8a7796_es13 = { .hs400_4taps = true, .hs400_bad_taps = BIT(2) | BIT(3) | BIT(6) | BIT(7), .hs400_calib_table = r8a7796_es13_calib_table, + .manual_tap_correction = true, }; static const struct renesas_sdhi_quirks sdhi_quirks_r8a77965 = { .hs400_bad_taps = BIT(2) | BIT(3) | BIT(6) | BIT(7), .hs400_calib_table = r8a77965_calib_table, + .manual_tap_correction = true, }; static const struct renesas_sdhi_quirks sdhi_quirks_r8a77990 = { .hs400_calib_table = r8a77990_calib_table, + .manual_tap_correction = true, }; /* @@ -268,6 +274,7 @@ static const struct of_device_id renesas_sdhi_internal_dmac_of_match[] = { { .compatible = "renesas,sdhi-r8a77990", .data = &of_r8a77990_compatible, }, { .compatible = "renesas,sdhi-r8a77995", .data = &of_rcar_gen3_nohs400_compatible, }, { .compatible = "renesas,rcar-gen3-sdhi", .data = &of_rcar_gen3_compatible, }, + { .compatible = "renesas,rcar-gen4-sdhi", .data = &of_rcar_gen3_compatible, }, {}, }; MODULE_DEVICE_TABLE(of, renesas_sdhi_internal_dmac_of_match); @@ -321,7 +328,7 @@ renesas_sdhi_internal_dmac_dataend_dma(struct tmio_mmc_host *host) } /* - * renesas_sdhi_internal_dmac_map() will be called with two difference + * renesas_sdhi_internal_dmac_map() will be called with two different * sg pointers in two mmc_data by .pre_req(), but tmio host can have a single * sg_ptr only. So, renesas_sdhi_internal_dmac_{un}map() should use a sg * pointer in a mmc_data instead of host->sg_ptr. @@ -355,7 +362,7 @@ renesas_sdhi_internal_dmac_map(struct tmio_mmc_host *host, data->host_cookie = cookie; - /* This DMAC cannot handle if buffer is not 128-bytes alignment */ + /* This DMAC needs buffers to be 128-byte aligned */ if (!IS_ALIGNED(sg_dma_address(data->sg), 128)) { renesas_sdhi_internal_dmac_unmap(host, data, cookie); return false; diff --git a/drivers/mmc/host/sdhci-brcmstb.c b/drivers/mmc/host/sdhci-brcmstb.c index 8eb57de48e0c..aff36a933ebe 100644 --- a/drivers/mmc/host/sdhci-brcmstb.c +++ b/drivers/mmc/host/sdhci-brcmstb.c @@ -31,6 +31,8 @@ struct sdhci_brcmstb_priv { void __iomem *cfg_regs; unsigned int flags; + struct clk *base_clk; + u32 base_freq_hz; }; struct brcmstb_match_priv { @@ -250,9 +252,11 @@ static int sdhci_brcmstb_probe(struct platform_device *pdev) struct sdhci_pltfm_host *pltfm_host; const struct of_device_id *match; struct sdhci_brcmstb_priv *priv; + u32 actual_clock_mhz; struct sdhci_host *host; struct resource *iomem; struct clk *clk; + struct clk *base_clk = NULL; int res; match = of_match_node(sdhci_brcm_of_match, pdev->dev.of_node); @@ -330,6 +334,35 @@ static int sdhci_brcmstb_probe(struct platform_device *pdev) if (match_priv->flags & BRCMSTB_MATCH_FLAGS_BROKEN_TIMEOUT) host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL; + /* Change the base clock frequency if the DT property exists */ + if (device_property_read_u32(&pdev->dev, "clock-frequency", + &priv->base_freq_hz) != 0) + goto add_host; + + base_clk = devm_clk_get_optional(&pdev->dev, "sdio_freq"); + if (IS_ERR(base_clk)) { + dev_warn(&pdev->dev, "Clock for \"sdio_freq\" not found\n"); + goto add_host; + } + + res = clk_prepare_enable(base_clk); + if (res) + goto err; + + /* set improved clock rate */ + clk_set_rate(base_clk, priv->base_freq_hz); + actual_clock_mhz = clk_get_rate(base_clk) / 1000000; + + host->caps &= ~SDHCI_CLOCK_V3_BASE_MASK; + host->caps |= (actual_clock_mhz << SDHCI_CLOCK_BASE_SHIFT); + /* Disable presets because they are now incorrect */ + host->quirks2 |= SDHCI_QUIRK2_PRESET_VALUE_BROKEN; + + dev_dbg(&pdev->dev, "Base Clock Frequency changed to %dMHz\n", + actual_clock_mhz); + priv->base_clk = base_clk; + +add_host: res = sdhci_brcmstb_add_host(host, priv); if (res) goto err; @@ -340,6 +373,7 @@ static int sdhci_brcmstb_probe(struct platform_device *pdev) err: sdhci_pltfm_free(pdev); err_clk: + clk_disable_unprepare(base_clk); clk_disable_unprepare(clk); return res; } @@ -351,11 +385,51 @@ static void sdhci_brcmstb_shutdown(struct platform_device *pdev) MODULE_DEVICE_TABLE(of, sdhci_brcm_of_match); +#ifdef CONFIG_PM_SLEEP +static int sdhci_brcmstb_suspend(struct device *dev) +{ + struct sdhci_host *host = dev_get_drvdata(dev); + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct sdhci_brcmstb_priv *priv = sdhci_pltfm_priv(pltfm_host); + + clk_disable_unprepare(priv->base_clk); + return sdhci_pltfm_suspend(dev); +} + +static int sdhci_brcmstb_resume(struct device *dev) +{ + struct sdhci_host *host = dev_get_drvdata(dev); + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct sdhci_brcmstb_priv *priv = sdhci_pltfm_priv(pltfm_host); + int ret; + + ret = sdhci_pltfm_resume(dev); + if (!ret && priv->base_freq_hz) { + ret = clk_prepare_enable(priv->base_clk); + /* + * Note: using clk_get_rate() below as clk_get_rate() + * honors CLK_GET_RATE_NOCACHE attribute, but clk_set_rate() + * may do implicit get_rate() calls that do not honor + * CLK_GET_RATE_NOCACHE. + */ + if (!ret && + (clk_get_rate(priv->base_clk) != priv->base_freq_hz)) + ret = clk_set_rate(priv->base_clk, priv->base_freq_hz); + } + + return ret; +} +#endif + +static const struct dev_pm_ops sdhci_brcmstb_pmops = { + SET_SYSTEM_SLEEP_PM_OPS(sdhci_brcmstb_suspend, sdhci_brcmstb_resume) +}; + static struct platform_driver sdhci_brcmstb_driver = { .driver = { .name = "sdhci-brcmstb", .probe_type = PROBE_PREFER_ASYNCHRONOUS, - .pm = &sdhci_pltfm_pmops, + .pm = &sdhci_brcmstb_pmops, .of_match_table = of_match_ptr(sdhci_brcm_of_match), }, .probe = sdhci_brcmstb_probe, diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c index e395411fb6fd..dc2991422a87 100644 --- a/drivers/mmc/host/sdhci-msm.c +++ b/drivers/mmc/host/sdhci-msm.c @@ -2435,33 +2435,12 @@ static const struct sdhci_msm_variant_info sdm845_sdhci_var = { }; static const struct of_device_id sdhci_msm_dt_match[] = { - /* Following two entries are deprecated (kept only for backward compatibility) */ - {.compatible = "qcom,sdhci-msm-v4", .data = &sdhci_msm_mci_var}, - {.compatible = "qcom,sdhci-msm-v5", .data = &sdhci_msm_v5_var}, - /* Add entries for sdcc versions less than 5.0 here */ - {.compatible = "qcom,apq8084-sdhci", .data = &sdhci_msm_mci_var}, - {.compatible = "qcom,msm8226-sdhci", .data = &sdhci_msm_mci_var}, - {.compatible = "qcom,msm8916-sdhci", .data = &sdhci_msm_mci_var}, - {.compatible = "qcom,msm8953-sdhci", .data = &sdhci_msm_mci_var}, - {.compatible = "qcom,msm8974-sdhci", .data = &sdhci_msm_mci_var}, - {.compatible = "qcom,msm8992-sdhci", .data = &sdhci_msm_mci_var}, - {.compatible = "qcom,msm8994-sdhci", .data = &sdhci_msm_mci_var}, - {.compatible = "qcom,msm8996-sdhci", .data = &sdhci_msm_mci_var}, /* - * Add entries for sdcc version 5.0 here. For SDCC version 5.0.0, - * MCI registers are removed from SDCC interface and some registers - * are moved to HC. + * Do not add new variants to the driver which are compatible with + * generic ones, unless they need customization. */ - {.compatible = "qcom,qcs404-sdhci", .data = &sdhci_msm_v5_var}, - {.compatible = "qcom,sdx55-sdhci", .data = &sdhci_msm_v5_var}, - {.compatible = "qcom,sdx65-sdhci", .data = &sdhci_msm_v5_var}, - {.compatible = "qcom,sdm630-sdhci", .data = &sdhci_msm_v5_var}, - {.compatible = "qcom,sm6125-sdhci", .data = &sdhci_msm_v5_var}, - {.compatible = "qcom,sm6350-sdhci", .data = &sdhci_msm_v5_var}, - {.compatible = "qcom,sm8150-sdhci", .data = &sdhci_msm_v5_var}, - {.compatible = "qcom,sm8250-sdhci", .data = &sdhci_msm_v5_var}, - {.compatible = "qcom,sc7280-sdhci", .data = &sdhci_msm_v5_var}, - /* Add entries where soc specific handling is required, here */ + {.compatible = "qcom,sdhci-msm-v4", .data = &sdhci_msm_mci_var}, + {.compatible = "qcom,sdhci-msm-v5", .data = &sdhci_msm_v5_var}, {.compatible = "qcom,sdm845-sdhci", .data = &sdm845_sdhci_var}, {.compatible = "qcom,sc7180-sdhci", .data = &sdm845_sdhci_var}, {}, diff --git a/drivers/mmc/host/sdhci-of-arasan.c b/drivers/mmc/host/sdhci-of-arasan.c index 757801dfc308..3997cad1f793 100644 --- a/drivers/mmc/host/sdhci-of-arasan.c +++ b/drivers/mmc/host/sdhci-of-arasan.c @@ -1733,7 +1733,6 @@ err_pltfm_free: static int sdhci_arasan_remove(struct platform_device *pdev) { - int ret; struct sdhci_host *host = platform_get_drvdata(pdev); struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); struct sdhci_arasan_data *sdhci_arasan = sdhci_pltfm_priv(pltfm_host); @@ -1747,11 +1746,11 @@ static int sdhci_arasan_remove(struct platform_device *pdev) sdhci_arasan_unregister_sdclk(&pdev->dev); - ret = sdhci_pltfm_unregister(pdev); + sdhci_pltfm_unregister(pdev); clk_disable_unprepare(clk_ahb); - return ret; + return 0; } static struct platform_driver sdhci_arasan_driver = { diff --git a/drivers/mmc/host/sdhci-of-at91.c b/drivers/mmc/host/sdhci-of-at91.c index 10fb4cb2c731..cd0134580a90 100644 --- a/drivers/mmc/host/sdhci-of-at91.c +++ b/drivers/mmc/host/sdhci-of-at91.c @@ -100,8 +100,13 @@ static void sdhci_at91_set_clock(struct sdhci_host *host, unsigned int clock) static void sdhci_at91_set_uhs_signaling(struct sdhci_host *host, unsigned int timing) { - if (timing == MMC_TIMING_MMC_DDR52) - sdhci_writeb(host, SDMMC_MC1R_DDR, SDMMC_MC1R); + u8 mc1r; + + if (timing == MMC_TIMING_MMC_DDR52) { + mc1r = sdhci_readb(host, SDMMC_MC1R); + mc1r |= SDMMC_MC1R_DDR; + sdhci_writeb(host, mc1r, SDMMC_MC1R); + } sdhci_set_uhs_signaling(host, timing); } diff --git a/drivers/mmc/host/sdhci-of-dwcmshc.c b/drivers/mmc/host/sdhci-of-dwcmshc.c index bac874ab0b33..4e904850973c 100644 --- a/drivers/mmc/host/sdhci-of-dwcmshc.c +++ b/drivers/mmc/host/sdhci-of-dwcmshc.c @@ -15,6 +15,7 @@ #include <linux/module.h> #include <linux/of.h> #include <linux/of_device.h> +#include <linux/reset.h> #include <linux/sizes.h> #include "sdhci-pltfm.h" @@ -30,6 +31,7 @@ /* Offset inside the vendor area 1 */ #define DWCMSHC_HOST_CTRL3 0x8 #define DWCMSHC_EMMC_CONTROL 0x2c +#define DWCMSHC_CARD_IS_EMMC BIT(0) #define DWCMSHC_ENHANCED_STROBE BIT(8) #define DWCMSHC_EMMC_ATCTRL 0x40 @@ -38,7 +40,7 @@ #define DWCMSHC_EMMC_DLL_RXCLK 0x804 #define DWCMSHC_EMMC_DLL_TXCLK 0x808 #define DWCMSHC_EMMC_DLL_STRBIN 0x80c -#define DLL_STRBIN_TAPNUM_FROM_SW BIT(24) +#define DECMSHC_EMMC_DLL_CMDOUT 0x810 #define DWCMSHC_EMMC_DLL_STATUS0 0x840 #define DWCMSHC_EMMC_DLL_START BIT(0) #define DWCMSHC_EMMC_DLL_LOCKED BIT(8) @@ -47,22 +49,39 @@ #define DWCMSHC_EMMC_DLL_START_POINT 16 #define DWCMSHC_EMMC_DLL_INC 8 #define DWCMSHC_EMMC_DLL_DLYENA BIT(27) -#define DLL_TXCLK_TAPNUM_DEFAULT 0x8 -#define DLL_STRBIN_TAPNUM_DEFAULT 0x8 +#define DLL_TXCLK_TAPNUM_DEFAULT 0x10 +#define DLL_TXCLK_TAPNUM_90_DEGREES 0xA #define DLL_TXCLK_TAPNUM_FROM_SW BIT(24) +#define DLL_STRBIN_TAPNUM_DEFAULT 0x8 +#define DLL_STRBIN_TAPNUM_FROM_SW BIT(24) +#define DLL_STRBIN_DELAY_NUM_SEL BIT(26) +#define DLL_STRBIN_DELAY_NUM_OFFSET 16 +#define DLL_STRBIN_DELAY_NUM_DEFAULT 0x16 #define DLL_RXCLK_NO_INVERTER 1 #define DLL_RXCLK_INVERTER 0 +#define DLL_CMDOUT_TAPNUM_90_DEGREES 0x8 +#define DLL_CMDOUT_TAPNUM_FROM_SW BIT(24) +#define DLL_CMDOUT_SRC_CLK_NEG BIT(28) +#define DLL_CMDOUT_EN_SRC_CLK_NEG BIT(29) + #define DLL_LOCK_WO_TMOUT(x) \ ((((x) & DWCMSHC_EMMC_DLL_LOCKED) == DWCMSHC_EMMC_DLL_LOCKED) && \ (((x) & DWCMSHC_EMMC_DLL_TIMEOUT) == 0)) -#define RK3568_MAX_CLKS 3 +#define RK35xx_MAX_CLKS 3 #define BOUNDARY_OK(addr, len) \ ((addr | (SZ_128M - 1)) == ((addr + len - 1) | (SZ_128M - 1))) -struct rk3568_priv { +enum dwcmshc_rk_type { + DWCMSHC_RK3568, + DWCMSHC_RK3588, +}; + +struct rk35xx_priv { /* Rockchip specified optional clocks */ - struct clk_bulk_data rockchip_clks[RK3568_MAX_CLKS]; + struct clk_bulk_data rockchip_clks[RK35xx_MAX_CLKS]; + struct reset_control *reset; + enum dwcmshc_rk_type devtype; u8 txclk_tapnum; }; @@ -131,7 +150,9 @@ static void dwcmshc_request(struct mmc_host *mmc, struct mmc_request *mrq) static void dwcmshc_set_uhs_signaling(struct sdhci_host *host, unsigned int timing) { - u16 ctrl_2; + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct dwcmshc_priv *priv = sdhci_pltfm_priv(pltfm_host); + u16 ctrl, ctrl_2; ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2); /* Select Bus Speed Mode for host */ @@ -149,8 +170,15 @@ static void dwcmshc_set_uhs_signaling(struct sdhci_host *host, else if ((timing == MMC_TIMING_UHS_DDR50) || (timing == MMC_TIMING_MMC_DDR52)) ctrl_2 |= SDHCI_CTRL_UHS_DDR50; - else if (timing == MMC_TIMING_MMC_HS400) + else if (timing == MMC_TIMING_MMC_HS400) { + /* set CARD_IS_EMMC bit to enable Data Strobe for HS400 */ + ctrl = sdhci_readw(host, priv->vendor_specific_area1 + DWCMSHC_EMMC_CONTROL); + ctrl |= DWCMSHC_CARD_IS_EMMC; + sdhci_writew(host, ctrl, priv->vendor_specific_area1 + DWCMSHC_EMMC_CONTROL); + ctrl_2 |= DWCMSHC_CTRL_HS400; + } + sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2); } @@ -176,24 +204,18 @@ static void dwcmshc_rk3568_set_clock(struct sdhci_host *host, unsigned int clock { struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); struct dwcmshc_priv *dwc_priv = sdhci_pltfm_priv(pltfm_host); - struct rk3568_priv *priv = dwc_priv->priv; + struct rk35xx_priv *priv = dwc_priv->priv; u8 txclk_tapnum = DLL_TXCLK_TAPNUM_DEFAULT; u32 extra, reg; int err; host->mmc->actual_clock = 0; - /* - * DO NOT TOUCH THIS SETTING. RX clk inverter unit is enabled - * by default, but it shouldn't be enabled. We should anyway - * disable it before issuing any cmds. - */ - extra = DWCMSHC_EMMC_DLL_DLYENA | - DLL_RXCLK_NO_INVERTER << DWCMSHC_EMMC_DLL_RXCLK_SRCSEL; - sdhci_writel(host, extra, DWCMSHC_EMMC_DLL_RXCLK); - - if (clock == 0) + if (clock == 0) { + /* Disable interface clock at initial state. */ + sdhci_set_clock(host, clock); return; + } /* Rockchip platform only support 375KHz for identify mode */ if (clock <= 400000) @@ -211,9 +233,21 @@ static void dwcmshc_rk3568_set_clock(struct sdhci_host *host, unsigned int clock extra &= ~BIT(0); sdhci_writel(host, extra, reg); - if (clock <= 400000) { - /* Disable DLL to reset sample clock */ + if (clock <= 52000000) { + /* Disable DLL and reset both of sample and drive clock */ sdhci_writel(host, 0, DWCMSHC_EMMC_DLL_CTRL); + sdhci_writel(host, 0, DWCMSHC_EMMC_DLL_RXCLK); + sdhci_writel(host, 0, DWCMSHC_EMMC_DLL_TXCLK); + sdhci_writel(host, 0, DECMSHC_EMMC_DLL_CMDOUT); + /* + * Before switching to hs400es mode, the driver will enable + * enhanced strobe first. PHY needs to configure the parameters + * of enhanced strobe first. + */ + extra = DWCMSHC_EMMC_DLL_DLYENA | + DLL_STRBIN_DELAY_NUM_SEL | + DLL_STRBIN_DELAY_NUM_DEFAULT << DLL_STRBIN_DELAY_NUM_OFFSET; + sdhci_writel(host, extra, DWCMSHC_EMMC_DLL_STRBIN); return; } @@ -222,6 +256,15 @@ static void dwcmshc_rk3568_set_clock(struct sdhci_host *host, unsigned int clock udelay(1); sdhci_writel(host, 0x0, DWCMSHC_EMMC_DLL_CTRL); + /* + * We shouldn't set DLL_RXCLK_NO_INVERTER for identify mode but + * we must set it in higher speed mode. + */ + extra = DWCMSHC_EMMC_DLL_DLYENA; + if (priv->devtype == DWCMSHC_RK3568) + extra |= DLL_RXCLK_NO_INVERTER << DWCMSHC_EMMC_DLL_RXCLK_SRCSEL; + sdhci_writel(host, extra, DWCMSHC_EMMC_DLL_RXCLK); + /* Init DLL settings */ extra = 0x5 << DWCMSHC_EMMC_DLL_START_POINT | 0x2 << DWCMSHC_EMMC_DLL_INC | @@ -244,8 +287,20 @@ static void dwcmshc_rk3568_set_clock(struct sdhci_host *host, unsigned int clock host->mmc->ios.timing == MMC_TIMING_MMC_HS400) txclk_tapnum = priv->txclk_tapnum; + if ((priv->devtype == DWCMSHC_RK3588) && host->mmc->ios.timing == MMC_TIMING_MMC_HS400) { + txclk_tapnum = DLL_TXCLK_TAPNUM_90_DEGREES; + + extra = DLL_CMDOUT_SRC_CLK_NEG | + DLL_CMDOUT_EN_SRC_CLK_NEG | + DWCMSHC_EMMC_DLL_DLYENA | + DLL_CMDOUT_TAPNUM_90_DEGREES | + DLL_CMDOUT_TAPNUM_FROM_SW; + sdhci_writel(host, extra, DECMSHC_EMMC_DLL_CMDOUT); + } + extra = DWCMSHC_EMMC_DLL_DLYENA | DLL_TXCLK_TAPNUM_FROM_SW | + DLL_RXCLK_NO_INVERTER << DWCMSHC_EMMC_DLL_RXCLK_SRCSEL | txclk_tapnum; sdhci_writel(host, extra, DWCMSHC_EMMC_DLL_TXCLK); @@ -255,6 +310,21 @@ static void dwcmshc_rk3568_set_clock(struct sdhci_host *host, unsigned int clock sdhci_writel(host, extra, DWCMSHC_EMMC_DLL_STRBIN); } +static void rk35xx_sdhci_reset(struct sdhci_host *host, u8 mask) +{ + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct dwcmshc_priv *dwc_priv = sdhci_pltfm_priv(pltfm_host); + struct rk35xx_priv *priv = dwc_priv->priv; + + if (mask & SDHCI_RESET_ALL && priv->reset) { + reset_control_assert(priv->reset); + udelay(1); + reset_control_deassert(priv->reset); + } + + sdhci_reset(host, mask); +} + static const struct sdhci_ops sdhci_dwcmshc_ops = { .set_clock = sdhci_set_clock, .set_bus_width = sdhci_set_bus_width, @@ -264,12 +334,12 @@ static const struct sdhci_ops sdhci_dwcmshc_ops = { .adma_write_desc = dwcmshc_adma_write_desc, }; -static const struct sdhci_ops sdhci_dwcmshc_rk3568_ops = { +static const struct sdhci_ops sdhci_dwcmshc_rk35xx_ops = { .set_clock = dwcmshc_rk3568_set_clock, .set_bus_width = sdhci_set_bus_width, .set_uhs_signaling = dwcmshc_set_uhs_signaling, .get_max_clock = sdhci_pltfm_clk_get_max_clock, - .reset = sdhci_reset, + .reset = rk35xx_sdhci_reset, .adma_write_desc = dwcmshc_adma_write_desc, }; @@ -279,30 +349,37 @@ static const struct sdhci_pltfm_data sdhci_dwcmshc_pdata = { .quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN, }; -static const struct sdhci_pltfm_data sdhci_dwcmshc_rk3568_pdata = { - .ops = &sdhci_dwcmshc_rk3568_ops, +static const struct sdhci_pltfm_data sdhci_dwcmshc_rk35xx_pdata = { + .ops = &sdhci_dwcmshc_rk35xx_ops, .quirks = SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN | SDHCI_QUIRK_BROKEN_TIMEOUT_VAL, .quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN | SDHCI_QUIRK2_CLOCK_DIV_ZERO_BROKEN, }; -static int dwcmshc_rk3568_init(struct sdhci_host *host, struct dwcmshc_priv *dwc_priv) +static int dwcmshc_rk35xx_init(struct sdhci_host *host, struct dwcmshc_priv *dwc_priv) { int err; - struct rk3568_priv *priv = dwc_priv->priv; + struct rk35xx_priv *priv = dwc_priv->priv; + + priv->reset = devm_reset_control_array_get_optional_exclusive(mmc_dev(host->mmc)); + if (IS_ERR(priv->reset)) { + err = PTR_ERR(priv->reset); + dev_err(mmc_dev(host->mmc), "failed to get reset control %d\n", err); + return err; + } priv->rockchip_clks[0].id = "axi"; priv->rockchip_clks[1].id = "block"; priv->rockchip_clks[2].id = "timer"; - err = devm_clk_bulk_get_optional(mmc_dev(host->mmc), RK3568_MAX_CLKS, + err = devm_clk_bulk_get_optional(mmc_dev(host->mmc), RK35xx_MAX_CLKS, priv->rockchip_clks); if (err) { dev_err(mmc_dev(host->mmc), "failed to get clocks %d\n", err); return err; } - err = clk_bulk_prepare_enable(RK3568_MAX_CLKS, priv->rockchip_clks); + err = clk_bulk_prepare_enable(RK35xx_MAX_CLKS, priv->rockchip_clks); if (err) { dev_err(mmc_dev(host->mmc), "failed to enable clocks %d\n", err); return err; @@ -321,10 +398,28 @@ static int dwcmshc_rk3568_init(struct sdhci_host *host, struct dwcmshc_priv *dwc return 0; } +static void dwcmshc_rk35xx_postinit(struct sdhci_host *host, struct dwcmshc_priv *dwc_priv) +{ + /* + * Don't support highspeed bus mode with low clk speed as we + * cannot use DLL for this condition. + */ + if (host->mmc->f_max <= 52000000) { + dev_info(mmc_dev(host->mmc), "Disabling HS200/HS400, frequency too low (%d)\n", + host->mmc->f_max); + host->mmc->caps2 &= ~(MMC_CAP2_HS200 | MMC_CAP2_HS400); + host->mmc->caps &= ~(MMC_CAP_3_3V_DDR | MMC_CAP_1_8V_DDR); + } +} + static const struct of_device_id sdhci_dwcmshc_dt_ids[] = { { + .compatible = "rockchip,rk3588-dwcmshc", + .data = &sdhci_dwcmshc_rk35xx_pdata, + }, + { .compatible = "rockchip,rk3568-dwcmshc", - .data = &sdhci_dwcmshc_rk3568_pdata, + .data = &sdhci_dwcmshc_rk35xx_pdata, }, { .compatible = "snps,dwcmshc-sdhci", @@ -347,7 +442,7 @@ static int dwcmshc_probe(struct platform_device *pdev) struct sdhci_pltfm_host *pltfm_host; struct sdhci_host *host; struct dwcmshc_priv *priv; - struct rk3568_priv *rk_priv = NULL; + struct rk35xx_priv *rk_priv = NULL; const struct sdhci_pltfm_data *pltfm_data; int err; u32 extra; @@ -402,33 +497,47 @@ static int dwcmshc_probe(struct platform_device *pdev) host->mmc_host_ops.request = dwcmshc_request; host->mmc_host_ops.hs400_enhanced_strobe = dwcmshc_hs400_enhanced_strobe; - if (pltfm_data == &sdhci_dwcmshc_rk3568_pdata) { - rk_priv = devm_kzalloc(&pdev->dev, sizeof(struct rk3568_priv), GFP_KERNEL); + if (pltfm_data == &sdhci_dwcmshc_rk35xx_pdata) { + rk_priv = devm_kzalloc(&pdev->dev, sizeof(struct rk35xx_priv), GFP_KERNEL); if (!rk_priv) { err = -ENOMEM; goto err_clk; } + if (of_device_is_compatible(pdev->dev.of_node, "rockchip,rk3588-dwcmshc")) + rk_priv->devtype = DWCMSHC_RK3588; + else + rk_priv->devtype = DWCMSHC_RK3568; + priv->priv = rk_priv; - err = dwcmshc_rk3568_init(host, priv); + err = dwcmshc_rk35xx_init(host, priv); if (err) goto err_clk; } host->mmc->caps |= MMC_CAP_WAIT_WHILE_BUSY; - err = sdhci_add_host(host); + err = sdhci_setup_host(host); if (err) goto err_clk; + if (rk_priv) + dwcmshc_rk35xx_postinit(host, priv); + + err = __sdhci_add_host(host); + if (err) + goto err_setup_host; + return 0; +err_setup_host: + sdhci_cleanup_host(host); err_clk: clk_disable_unprepare(pltfm_host->clk); clk_disable_unprepare(priv->bus_clk); if (rk_priv) - clk_bulk_disable_unprepare(RK3568_MAX_CLKS, + clk_bulk_disable_unprepare(RK35xx_MAX_CLKS, rk_priv->rockchip_clks); free_pltfm: sdhci_pltfm_free(pdev); @@ -440,14 +549,14 @@ static int dwcmshc_remove(struct platform_device *pdev) struct sdhci_host *host = platform_get_drvdata(pdev); struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); struct dwcmshc_priv *priv = sdhci_pltfm_priv(pltfm_host); - struct rk3568_priv *rk_priv = priv->priv; + struct rk35xx_priv *rk_priv = priv->priv; sdhci_remove_host(host, 0); clk_disable_unprepare(pltfm_host->clk); clk_disable_unprepare(priv->bus_clk); if (rk_priv) - clk_bulk_disable_unprepare(RK3568_MAX_CLKS, + clk_bulk_disable_unprepare(RK35xx_MAX_CLKS, rk_priv->rockchip_clks); sdhci_pltfm_free(pdev); @@ -460,7 +569,7 @@ static int dwcmshc_suspend(struct device *dev) struct sdhci_host *host = dev_get_drvdata(dev); struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); struct dwcmshc_priv *priv = sdhci_pltfm_priv(pltfm_host); - struct rk3568_priv *rk_priv = priv->priv; + struct rk35xx_priv *rk_priv = priv->priv; int ret; ret = sdhci_suspend_host(host); @@ -472,7 +581,7 @@ static int dwcmshc_suspend(struct device *dev) clk_disable_unprepare(priv->bus_clk); if (rk_priv) - clk_bulk_disable_unprepare(RK3568_MAX_CLKS, + clk_bulk_disable_unprepare(RK35xx_MAX_CLKS, rk_priv->rockchip_clks); return ret; @@ -483,7 +592,7 @@ static int dwcmshc_resume(struct device *dev) struct sdhci_host *host = dev_get_drvdata(dev); struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); struct dwcmshc_priv *priv = sdhci_pltfm_priv(pltfm_host); - struct rk3568_priv *rk_priv = priv->priv; + struct rk35xx_priv *rk_priv = priv->priv; int ret; ret = clk_prepare_enable(pltfm_host->clk); @@ -497,7 +606,7 @@ static int dwcmshc_resume(struct device *dev) } if (rk_priv) { - ret = clk_bulk_prepare_enable(RK3568_MAX_CLKS, + ret = clk_bulk_prepare_enable(RK35xx_MAX_CLKS, rk_priv->rockchip_clks); if (ret) return ret; diff --git a/drivers/mmc/host/sdhci-of-esdhc.c b/drivers/mmc/host/sdhci-of-esdhc.c index d9dc41143bb3..e0266638381d 100644 --- a/drivers/mmc/host/sdhci-of-esdhc.c +++ b/drivers/mmc/host/sdhci-of-esdhc.c @@ -904,6 +904,7 @@ static int esdhc_signal_voltage_switch(struct mmc_host *mmc, scfg_node = of_find_matching_node(NULL, scfg_device_ids); if (scfg_node) scfg_base = of_iomap(scfg_node, 0); + of_node_put(scfg_node); if (scfg_base) { sdhciovselcr = SDHCIOVSELCR_TGLEN | SDHCIOVSELCR_VSELVAL; @@ -1418,7 +1419,7 @@ static int esdhc_hs400_prepare_ddr(struct mmc_host *mmc) static int sdhci_esdhc_probe(struct platform_device *pdev) { struct sdhci_host *host; - struct device_node *np; + struct device_node *np, *tp; struct sdhci_pltfm_host *pltfm_host; struct sdhci_esdhc *esdhc; int ret; @@ -1463,7 +1464,9 @@ static int sdhci_esdhc_probe(struct platform_device *pdev) if (esdhc->vendor_ver > VENDOR_V_22) host->quirks &= ~SDHCI_QUIRK_NO_BUSY_IRQ; - if (of_find_compatible_node(NULL, NULL, "fsl,p2020-esdhc")) { + tp = of_find_compatible_node(NULL, NULL, "fsl,p2020-esdhc"); + if (tp) { + of_node_put(tp); host->quirks |= SDHCI_QUIRK_RESET_AFTER_REQUEST; host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL; } diff --git a/drivers/mmc/host/sdhci-pci-gli.c b/drivers/mmc/host/sdhci-pci-gli.c index f13c08db3da5..4d509f656188 100644 --- a/drivers/mmc/host/sdhci-pci-gli.c +++ b/drivers/mmc/host/sdhci-pci-gli.c @@ -95,6 +95,9 @@ #define PCIE_GLI_9763E_SCR 0x8E0 #define GLI_9763E_SCR_AXI_REQ BIT(9) +#define PCIE_GLI_9763E_CFG 0x8A0 +#define GLI_9763E_CFG_LPSN_DIS BIT(12) + #define PCIE_GLI_9763E_CFG2 0x8A4 #define GLI_9763E_CFG2_L1DLY GENMASK(28, 19) #define GLI_9763E_CFG2_L1DLY_MID 0x54 @@ -963,12 +966,40 @@ static void gli_set_gl9763e(struct sdhci_pci_slot *slot) } #ifdef CONFIG_PM +static void gl9763e_set_low_power_negotiation(struct sdhci_pci_slot *slot, bool enable) +{ + struct pci_dev *pdev = slot->chip->pdev; + u32 value; + + pci_read_config_dword(pdev, PCIE_GLI_9763E_VHS, &value); + value &= ~GLI_9763E_VHS_REV; + value |= FIELD_PREP(GLI_9763E_VHS_REV, GLI_9763E_VHS_REV_W); + pci_write_config_dword(pdev, PCIE_GLI_9763E_VHS, value); + + pci_read_config_dword(pdev, PCIE_GLI_9763E_CFG, &value); + + if (enable) + value &= ~GLI_9763E_CFG_LPSN_DIS; + else + value |= GLI_9763E_CFG_LPSN_DIS; + + pci_write_config_dword(pdev, PCIE_GLI_9763E_CFG, value); + + pci_read_config_dword(pdev, PCIE_GLI_9763E_VHS, &value); + value &= ~GLI_9763E_VHS_REV; + value |= FIELD_PREP(GLI_9763E_VHS_REV, GLI_9763E_VHS_REV_R); + pci_write_config_dword(pdev, PCIE_GLI_9763E_VHS, value); +} + static int gl9763e_runtime_suspend(struct sdhci_pci_chip *chip) { struct sdhci_pci_slot *slot = chip->slots[0]; struct sdhci_host *host = slot->host; u16 clock; + /* Enable LPM negotiation to allow entering L1 state */ + gl9763e_set_low_power_negotiation(slot, true); + clock = sdhci_readw(host, SDHCI_CLOCK_CONTROL); clock &= ~(SDHCI_CLOCK_PLL_EN | SDHCI_CLOCK_CARD_EN); sdhci_writew(host, clock, SDHCI_CLOCK_CONTROL); @@ -1002,6 +1033,9 @@ static int gl9763e_runtime_resume(struct sdhci_pci_chip *chip) clock |= SDHCI_CLOCK_CARD_EN; sdhci_writew(host, clock, SDHCI_CLOCK_CONTROL); + /* Disable LPM negotiation to avoid entering L1 state. */ + gl9763e_set_low_power_negotiation(slot, false); + return 0; } #endif diff --git a/drivers/mmc/host/sdhci-st.c b/drivers/mmc/host/sdhci-st.c index d41582c21aa3..6415916fbd91 100644 --- a/drivers/mmc/host/sdhci-st.c +++ b/drivers/mmc/host/sdhci-st.c @@ -440,15 +440,14 @@ static int sdhci_st_remove(struct platform_device *pdev) struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); struct st_mmc_platform_data *pdata = sdhci_pltfm_priv(pltfm_host); struct reset_control *rstc = pdata->rstc; - int ret; - ret = sdhci_pltfm_unregister(pdev); + sdhci_pltfm_unregister(pdev); clk_disable_unprepare(pdata->icnclk); reset_control_assert(rstc); - return ret; + return 0; } #ifdef CONFIG_PM_SLEEP diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 22152029e14c..7689ffec5ad1 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -224,6 +224,7 @@ void sdhci_reset(struct sdhci_host *host, u8 mask) if (timedout) { pr_err("%s: Reset 0x%x never completed.\n", mmc_hostname(host->mmc), (int)mask); + sdhci_err_stats_inc(host, CTRL_TIMEOUT); sdhci_dumpregs(host); return; } @@ -1716,6 +1717,7 @@ static bool sdhci_send_command_retry(struct sdhci_host *host, if (!timeout--) { pr_err("%s: Controller never released inhibit bit(s).\n", mmc_hostname(host->mmc)); + sdhci_err_stats_inc(host, CTRL_TIMEOUT); sdhci_dumpregs(host); cmd->error = -EIO; return false; @@ -1965,6 +1967,7 @@ void sdhci_enable_clk(struct sdhci_host *host, u16 clk) if (timedout) { pr_err("%s: Internal clock never stabilised.\n", mmc_hostname(host->mmc)); + sdhci_err_stats_inc(host, CTRL_TIMEOUT); sdhci_dumpregs(host); return; } @@ -1987,6 +1990,7 @@ void sdhci_enable_clk(struct sdhci_host *host, u16 clk) if (timedout) { pr_err("%s: PLL clock never stabilised.\n", mmc_hostname(host->mmc)); + sdhci_err_stats_inc(host, CTRL_TIMEOUT); sdhci_dumpregs(host); return; } @@ -3161,6 +3165,7 @@ static void sdhci_timeout_timer(struct timer_list *t) if (host->cmd && !sdhci_data_line_cmd(host->cmd)) { pr_err("%s: Timeout waiting for hardware cmd interrupt.\n", mmc_hostname(host->mmc)); + sdhci_err_stats_inc(host, REQ_TIMEOUT); sdhci_dumpregs(host); host->cmd->error = -ETIMEDOUT; @@ -3183,6 +3188,7 @@ static void sdhci_timeout_data_timer(struct timer_list *t) (host->cmd && sdhci_data_line_cmd(host->cmd))) { pr_err("%s: Timeout waiting for hardware interrupt.\n", mmc_hostname(host->mmc)); + sdhci_err_stats_inc(host, REQ_TIMEOUT); sdhci_dumpregs(host); if (host->data) { @@ -3234,17 +3240,21 @@ static void sdhci_cmd_irq(struct sdhci_host *host, u32 intmask, u32 *intmask_p) return; pr_err("%s: Got command interrupt 0x%08x even though no command operation was in progress.\n", mmc_hostname(host->mmc), (unsigned)intmask); + sdhci_err_stats_inc(host, UNEXPECTED_IRQ); sdhci_dumpregs(host); return; } if (intmask & (SDHCI_INT_TIMEOUT | SDHCI_INT_CRC | SDHCI_INT_END_BIT | SDHCI_INT_INDEX)) { - if (intmask & SDHCI_INT_TIMEOUT) + if (intmask & SDHCI_INT_TIMEOUT) { host->cmd->error = -ETIMEDOUT; - else + sdhci_err_stats_inc(host, CMD_TIMEOUT); + } else { host->cmd->error = -EILSEQ; - + if (!mmc_op_tuning(host->cmd->opcode)) + sdhci_err_stats_inc(host, CMD_CRC); + } /* Treat data command CRC error the same as data CRC error */ if (host->cmd->data && (intmask & (SDHCI_INT_CRC | SDHCI_INT_TIMEOUT)) == @@ -3266,6 +3276,8 @@ static void sdhci_cmd_irq(struct sdhci_host *host, u32 intmask, u32 *intmask_p) -ETIMEDOUT : -EILSEQ; + sdhci_err_stats_inc(host, AUTO_CMD); + if (sdhci_auto_cmd23(host, mrq)) { mrq->sbc->error = err; __sdhci_finish_mrq(host, mrq); @@ -3342,6 +3354,7 @@ static void sdhci_data_irq(struct sdhci_host *host, u32 intmask) if (intmask & SDHCI_INT_DATA_TIMEOUT) { host->data_cmd = NULL; data_cmd->error = -ETIMEDOUT; + sdhci_err_stats_inc(host, CMD_TIMEOUT); __sdhci_finish_mrq(host, data_cmd->mrq); return; } @@ -3370,23 +3383,30 @@ static void sdhci_data_irq(struct sdhci_host *host, u32 intmask) pr_err("%s: Got data interrupt 0x%08x even though no data operation was in progress.\n", mmc_hostname(host->mmc), (unsigned)intmask); + sdhci_err_stats_inc(host, UNEXPECTED_IRQ); sdhci_dumpregs(host); return; } - if (intmask & SDHCI_INT_DATA_TIMEOUT) + if (intmask & SDHCI_INT_DATA_TIMEOUT) { host->data->error = -ETIMEDOUT; - else if (intmask & SDHCI_INT_DATA_END_BIT) + sdhci_err_stats_inc(host, DAT_TIMEOUT); + } else if (intmask & SDHCI_INT_DATA_END_BIT) { host->data->error = -EILSEQ; - else if ((intmask & SDHCI_INT_DATA_CRC) && + if (!mmc_op_tuning(SDHCI_GET_CMD(sdhci_readw(host, SDHCI_COMMAND)))) + sdhci_err_stats_inc(host, DAT_CRC); + } else if ((intmask & SDHCI_INT_DATA_CRC) && SDHCI_GET_CMD(sdhci_readw(host, SDHCI_COMMAND)) - != MMC_BUS_TEST_R) + != MMC_BUS_TEST_R) { host->data->error = -EILSEQ; - else if (intmask & SDHCI_INT_ADMA_ERROR) { + if (!mmc_op_tuning(SDHCI_GET_CMD(sdhci_readw(host, SDHCI_COMMAND)))) + sdhci_err_stats_inc(host, DAT_CRC); + } else if (intmask & SDHCI_INT_ADMA_ERROR) { pr_err("%s: ADMA error: 0x%08x\n", mmc_hostname(host->mmc), intmask); sdhci_adma_show_error(host); + sdhci_err_stats_inc(host, ADMA); host->data->error = -EIO; if (host->ops->adma_workaround) host->ops->adma_workaround(host, intmask); @@ -3584,6 +3604,7 @@ out: if (unexpected) { pr_err("%s: Unexpected interrupt 0x%08x.\n", mmc_hostname(host->mmc), unexpected); + sdhci_err_stats_inc(host, UNEXPECTED_IRQ); sdhci_dumpregs(host); } @@ -3905,20 +3926,27 @@ bool sdhci_cqe_irq(struct sdhci_host *host, u32 intmask, int *cmd_error, if (!host->cqe_on) return false; - if (intmask & (SDHCI_INT_INDEX | SDHCI_INT_END_BIT | SDHCI_INT_CRC)) + if (intmask & (SDHCI_INT_INDEX | SDHCI_INT_END_BIT | SDHCI_INT_CRC)) { *cmd_error = -EILSEQ; - else if (intmask & SDHCI_INT_TIMEOUT) + if (!mmc_op_tuning(host->cmd->opcode)) + sdhci_err_stats_inc(host, CMD_CRC); + } else if (intmask & SDHCI_INT_TIMEOUT) { *cmd_error = -ETIMEDOUT; - else + sdhci_err_stats_inc(host, CMD_TIMEOUT); + } else *cmd_error = 0; - if (intmask & (SDHCI_INT_DATA_END_BIT | SDHCI_INT_DATA_CRC)) + if (intmask & (SDHCI_INT_DATA_END_BIT | SDHCI_INT_DATA_CRC)) { *data_error = -EILSEQ; - else if (intmask & SDHCI_INT_DATA_TIMEOUT) + if (!mmc_op_tuning(host->cmd->opcode)) + sdhci_err_stats_inc(host, DAT_CRC); + } else if (intmask & SDHCI_INT_DATA_TIMEOUT) { *data_error = -ETIMEDOUT; - else if (intmask & SDHCI_INT_ADMA_ERROR) + sdhci_err_stats_inc(host, DAT_TIMEOUT); + } else if (intmask & SDHCI_INT_ADMA_ERROR) { *data_error = -EIO; - else + sdhci_err_stats_inc(host, ADMA); + } else *data_error = 0; /* Clear selected interrupts. */ @@ -3934,6 +3962,7 @@ bool sdhci_cqe_irq(struct sdhci_host *host, u32 intmask, int *cmd_error, sdhci_writel(host, intmask, SDHCI_INT_STATUS); pr_err("%s: CQE: Unexpected interrupt 0x%08x.\n", mmc_hostname(host->mmc), intmask); + sdhci_err_stats_inc(host, UNEXPECTED_IRQ); sdhci_dumpregs(host); } diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h index d7929d725730..95a08f09df30 100644 --- a/drivers/mmc/host/sdhci.h +++ b/drivers/mmc/host/sdhci.h @@ -356,6 +356,9 @@ struct sdhci_adma2_64_desc { */ #define MMC_CMD_TRANSFER_TIME (10 * NSEC_PER_MSEC) /* max 10 ms */ +#define sdhci_err_stats_inc(host, err_name) \ + mmc_debugfs_err_stats_inc((host)->mmc, MMC_ERR_##err_name) + enum sdhci_cookie { COOKIE_UNMAPPED, COOKIE_PRE_MAPPED, /* mapped by sdhci_pre_req() */ diff --git a/drivers/mmc/host/tmio_mmc.c b/drivers/mmc/host/tmio_mmc.c index b55a29c53d9c..53a2ad9a24b8 100644 --- a/drivers/mmc/host/tmio_mmc.c +++ b/drivers/mmc/host/tmio_mmc.c @@ -75,7 +75,7 @@ static void tmio_mmc_set_clock(struct tmio_mmc_host *host, tmio_mmc_clk_start(host); } -static void tmio_mmc_reset(struct tmio_mmc_host *host) +static void tmio_mmc_reset(struct tmio_mmc_host *host, bool preserve) { sd_ctrl_write16(host, CTL_RESET_SDIO, 0x0000); usleep_range(10000, 11000); diff --git a/drivers/mmc/host/tmio_mmc.h b/drivers/mmc/host/tmio_mmc.h index e754bb3f5c32..501613c74406 100644 --- a/drivers/mmc/host/tmio_mmc.h +++ b/drivers/mmc/host/tmio_mmc.h @@ -42,6 +42,7 @@ #define CTL_DMA_ENABLE 0xd8 #define CTL_RESET_SD 0xe0 #define CTL_VERSION 0xe2 +#define CTL_SDIF_MODE 0xe6 /* only known on R-Car 2+ */ /* Definitions for values the CTL_STOP_INTERNAL_ACTION register can take */ #define TMIO_STOP_STP BIT(0) @@ -98,6 +99,9 @@ /* Definitions for values the CTL_DMA_ENABLE register can take */ #define DMA_ENABLE_DMASDRW BIT(1) +/* Definitions for values the CTL_SDIF_MODE register can take */ +#define SDIF_MODE_HS400 BIT(0) /* only known on R-Car 2+ */ + /* Define some IRQ masks */ /* This is the mask used at reset by the chip */ #define TMIO_MASK_ALL 0x837f031d @@ -181,7 +185,7 @@ struct tmio_mmc_host { int (*multi_io_quirk)(struct mmc_card *card, unsigned int direction, int blk_size); int (*write16_hook)(struct tmio_mmc_host *host, int addr); - void (*reset)(struct tmio_mmc_host *host); + void (*reset)(struct tmio_mmc_host *host, bool preserve); bool (*check_retune)(struct tmio_mmc_host *host, struct mmc_request *mrq); void (*fixup_request)(struct tmio_mmc_host *host, struct mmc_request *mrq); unsigned int (*get_timeout_cycles)(struct tmio_mmc_host *host); diff --git a/drivers/mmc/host/tmio_mmc_core.c b/drivers/mmc/host/tmio_mmc_core.c index a5850d83908b..437048bb8027 100644 --- a/drivers/mmc/host/tmio_mmc_core.c +++ b/drivers/mmc/host/tmio_mmc_core.c @@ -179,8 +179,17 @@ static void tmio_mmc_set_bus_width(struct tmio_mmc_host *host, sd_ctrl_write16(host, CTL_SD_MEM_CARD_OPT, reg); } -static void tmio_mmc_reset(struct tmio_mmc_host *host) +static void tmio_mmc_reset(struct tmio_mmc_host *host, bool preserve) { + u16 card_opt, clk_ctrl, sdif_mode; + + if (preserve) { + card_opt = sd_ctrl_read16(host, CTL_SD_MEM_CARD_OPT); + clk_ctrl = sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL); + if (host->pdata->flags & TMIO_MMC_MIN_RCAR2) + sdif_mode = sd_ctrl_read16(host, CTL_SDIF_MODE); + } + /* FIXME - should we set stop clock reg here */ sd_ctrl_write16(host, CTL_RESET_SD, 0x0000); usleep_range(10000, 11000); @@ -190,7 +199,7 @@ static void tmio_mmc_reset(struct tmio_mmc_host *host) tmio_mmc_abort_dma(host); if (host->reset) - host->reset(host); + host->reset(host, preserve); sd_ctrl_write32_as_16_and_16(host, CTL_IRQ_MASK, host->sdcard_irq_mask_all); host->sdcard_irq_mask = host->sdcard_irq_mask_all; @@ -206,6 +215,13 @@ static void tmio_mmc_reset(struct tmio_mmc_host *host) sd_ctrl_write16(host, CTL_TRANSACTION_CTL, 0x0001); } + if (preserve) { + sd_ctrl_write16(host, CTL_SD_MEM_CARD_OPT, card_opt); + sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, clk_ctrl); + if (host->pdata->flags & TMIO_MMC_MIN_RCAR2) + sd_ctrl_write16(host, CTL_SDIF_MODE, sdif_mode); + } + if (host->mmc->card) mmc_retune_needed(host->mmc); } @@ -248,7 +264,7 @@ static void tmio_mmc_reset_work(struct work_struct *work) spin_unlock_irqrestore(&host->lock, flags); - tmio_mmc_reset(host); + tmio_mmc_reset(host, true); /* Ready for new calls */ host->mrq = NULL; @@ -961,7 +977,7 @@ static void tmio_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) tmio_mmc_power_off(host); /* For R-Car Gen2+, we need to reset SDHI specific SCC */ if (host->pdata->flags & TMIO_MMC_MIN_RCAR2) - tmio_mmc_reset(host); + tmio_mmc_reset(host, false); host->set_clock(host, 0); break; @@ -1189,7 +1205,7 @@ int tmio_mmc_host_probe(struct tmio_mmc_host *_host) _host->sdcard_irq_mask_all = TMIO_MASK_ALL; _host->set_clock(_host, 0); - tmio_mmc_reset(_host); + tmio_mmc_reset(_host, false); spin_lock_init(&_host->lock); mutex_init(&_host->ios_lock); @@ -1285,7 +1301,7 @@ int tmio_mmc_host_runtime_resume(struct device *dev) struct tmio_mmc_host *host = dev_get_drvdata(dev); tmio_mmc_clk_enable(host); - tmio_mmc_reset(host); + tmio_mmc_reset(host, false); if (host->clk_cache) host->set_clock(host, host->clk_cache); diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h index 37f975875102..8a30de08e913 100644 --- a/include/linux/mmc/card.h +++ b/include/linux/mmc/card.h @@ -219,7 +219,8 @@ struct sdio_cccr { wide_bus:1, high_power:1, high_speed:1, - disable_cd:1; + disable_cd:1, + enable_async_irq:1; }; struct sdio_cis { @@ -343,10 +344,16 @@ static inline bool mmc_large_sector(struct mmc_card *card) return card->ext_csd.data_sector_size == 4096; } +static inline int mmc_card_enable_async_irq(struct mmc_card *card) +{ + return card->cccr.enable_async_irq; +} + bool mmc_card_is_blockaddr(struct mmc_card *card); #define mmc_card_mmc(c) ((c)->type == MMC_TYPE_MMC) #define mmc_card_sd(c) ((c)->type == MMC_TYPE_SD) #define mmc_card_sdio(c) ((c)->type == MMC_TYPE_SDIO) +#define mmc_card_sd_combo(c) ((c)->type == MMC_TYPE_SD_COMBO) #endif /* LINUX_MMC_CARD_H */ diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index c193c50ccd78..eb8bc5b9b0b7 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -93,6 +93,25 @@ struct mmc_clk_phase_map { struct mmc_host; +enum mmc_err_stat { + MMC_ERR_CMD_TIMEOUT, + MMC_ERR_CMD_CRC, + MMC_ERR_DAT_TIMEOUT, + MMC_ERR_DAT_CRC, + MMC_ERR_AUTO_CMD, + MMC_ERR_ADMA, + MMC_ERR_TUNING, + MMC_ERR_CMDQ_RED, + MMC_ERR_CMDQ_GCE, + MMC_ERR_CMDQ_ICCE, + MMC_ERR_REQ_TIMEOUT, + MMC_ERR_CMDQ_REQ_TIMEOUT, + MMC_ERR_ICE_CFG, + MMC_ERR_CTRL_TIMEOUT, + MMC_ERR_UNEXPECTED_IRQ, + MMC_ERR_MAX, +}; + struct mmc_host_ops { /* * It is optional for the host to implement pre_req and post_req in @@ -501,6 +520,7 @@ struct mmc_host { /* Host Software Queue support */ bool hsq_enabled; + u32 err_stats[MMC_ERR_MAX]; unsigned long private[] ____cacheline_aligned; }; @@ -635,6 +655,12 @@ static inline enum dma_data_direction mmc_get_dma_dir(struct mmc_data *data) return data->flags & MMC_DATA_WRITE ? DMA_TO_DEVICE : DMA_FROM_DEVICE; } +static inline void mmc_debugfs_err_stats_inc(struct mmc_host *host, + enum mmc_err_stat stat) +{ + host->err_stats[stat] += 1; +} + int mmc_send_tuning(struct mmc_host *host, u32 opcode, int *cmd_error); int mmc_send_abort_tuning(struct mmc_host *host, u32 opcode); int mmc_get_ext_csd(struct mmc_card *card, u8 **new_ext_csd); diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h index d9a65c6a8816..9c50bc40f8ff 100644 --- a/include/linux/mmc/mmc.h +++ b/include/linux/mmc/mmc.h @@ -99,6 +99,12 @@ static inline bool mmc_op_multi(u32 opcode) opcode == MMC_READ_MULTIPLE_BLOCK; } +static inline bool mmc_op_tuning(u32 opcode) +{ + return opcode == MMC_SEND_TUNING_BLOCK || + opcode == MMC_SEND_TUNING_BLOCK_HS200; +} + /* * MMC_SWITCH argument format: * diff --git a/include/linux/mmc/sdio.h b/include/linux/mmc/sdio.h index 2a05d1ac4f0e..1ef400f28642 100644 --- a/include/linux/mmc/sdio.h +++ b/include/linux/mmc/sdio.h @@ -159,6 +159,11 @@ #define SDIO_DTSx_SET_TYPE_A (1 << SDIO_DRIVE_DTSx_SHIFT) #define SDIO_DTSx_SET_TYPE_C (2 << SDIO_DRIVE_DTSx_SHIFT) #define SDIO_DTSx_SET_TYPE_D (3 << SDIO_DRIVE_DTSx_SHIFT) + +#define SDIO_CCCR_INTERRUPT_EXT 0x16 +#define SDIO_INTERRUPT_EXT_SAI (1 << 0) +#define SDIO_INTERRUPT_EXT_EAI (1 << 1) + /* * Function Basic Registers (FBR) */ |