Merge tag 'du-next-20180925' of git://linuxtv.org/pinchartl/media into drm-next

R-Car DU support for the D3 and E3 SoCs (v4.20)

Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3289904.RCOHkcp7u8@avalon

11 files changed, 595 insertions, 147 deletions

diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt b/Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt
index 5a4e379bb414..3aeb0ec06fd0 100644
--- a/Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt
+++ b/Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt
@@ -15,10 +15,21 @@ Required properties:
   - "renesas,r8a7796-lvds" for R8A7796 (R-Car M3-W) compatible LVDS encoders
   - "renesas,r8a77970-lvds" for R8A77970 (R-Car V3M) compatible LVDS encoders
   - "renesas,r8a77980-lvds" for R8A77980 (R-Car V3H) compatible LVDS encoders
+  - "renesas,r8a77990-lvds" for R8A77990 (R-Car E3) compatible LVDS encoders
   - "renesas,r8a77995-lvds" for R8A77995 (R-Car D3) compatible LVDS encoders
 
 - reg: Base address and length for the memory-mapped registers
-- clocks: A phandle + clock-specifier pair for the functional clock
+- clocks: A list of phandles + clock-specifier pairs, one for each entry in
+  the clock-names property.
+- clock-names: Name of the clocks. This property is model-dependent.
+  - The functional clock, which mandatory for all models, shall be listed
+    first, and shall be named "fck".
+  - On R8A77990 and R8A77995, the LVDS encoder can use the EXTAL or
+    DU_DOTCLKINx clocks. Those clocks are optional. When supplied they must be
+    named "extal" and "dclkin.x" respectively, with "x" being the DU_DOTCLKIN
+    numerical index.
+  - When the clocks property only contains the functional clock, the
+    clock-names property may be omitted.
 - resets: A phandle + reset specifier for the module reset
 
 Required nodes:
diff --git a/Documentation/devicetree/bindings/display/renesas,du.txt b/Documentation/devicetree/bindings/display/renesas,du.txt
index caae2348a292..9de67be632d1 100644
--- a/Documentation/devicetree/bindings/display/renesas,du.txt
+++ b/Documentation/devicetree/bindings/display/renesas,du.txt
@@ -16,6 +16,7 @@ Required Properties:
     - "renesas,du-r8a77965" for R8A77965 (R-Car M3-N) compatible DU
     - "renesas,du-r8a77970" for R8A77970 (R-Car V3M) compatible DU
     - "renesas,du-r8a77980" for R8A77980 (R-Car V3H) compatible DU
+    - "renesas,du-r8a77990" for R8A77990 (R-Car E3) compatible DU
     - "renesas,du-r8a77995" for R8A77995 (R-Car D3) compatible DU
 
   - reg: the memory-mapped I/O registers base address and length
@@ -63,6 +64,7 @@ corresponding to each DU output.
  R8A77965 (R-Car M3-N)  DPAD 0         HDMI 0         LVDS 0         -
  R8A77970 (R-Car V3M)   DPAD 0         LVDS 0         -              -
  R8A77980 (R-Car V3H)   DPAD 0         LVDS 0         -              -
+ R8A77990 (R-Car E3)    DPAD 0         LVDS 0         LVDS 1         -
  R8A77995 (R-Car D3)    DPAD 0         LVDS 0         LVDS 1         -
 
 
diff --git a/drivers/gpu/drm/bridge/thc63lvd1024.c b/drivers/gpu/drm/bridge/thc63lvd1024.c
index c8b9edd5a7f4..b083a740565c 100644
--- a/drivers/gpu/drm/bridge/thc63lvd1024.c
+++ b/drivers/gpu/drm/bridge/thc63lvd1024.c
@@ -45,6 +45,23 @@ static int thc63_attach(struct drm_bridge *bridge)
 	return drm_bridge_attach(bridge->encoder, thc63->next, bridge);
 }
 
+static enum drm_mode_status thc63_mode_valid(struct drm_bridge *bridge,
+					const struct drm_display_mode *mode)
+{
+	/*
+	 * The THC63LVD1024 clock frequency range is 8 to 135 MHz in single-in
+	 * mode. Note that the limits are different in dual-in, single-out mode,
+	 * and will need to be adjusted accordingly.
+	 */
+	if (mode->clock < 8000)
+		return MODE_CLOCK_LOW;
+
+	if (mode->clock > 135000)
+		return MODE_CLOCK_HIGH;
+
+	return MODE_OK;
+}
+
 static void thc63_enable(struct drm_bridge *bridge)
 {
 	struct thc63_dev *thc63 = to_thc63(bridge);
@@ -77,6 +94,7 @@ static void thc63_disable(struct drm_bridge *bridge)
 
 static const struct drm_bridge_funcs thc63_bridge_func = {
 	.attach	= thc63_attach,
+	.mode_valid = thc63_mode_valid,
 	.enable = thc63_enable,
 	.disable = thc63_disable,
 };
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_crtc.c b/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
index 6288b9ad9e24..17741843cf51 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
+++ b/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
@@ -57,46 +57,12 @@ static void rcar_du_crtc_set(struct rcar_du_crtc *rcrtc, u32 reg, u32 set)
 		      rcar_du_read(rcdu, rcrtc->mmio_offset + reg) | set);
 }
 
-static void rcar_du_crtc_clr_set(struct rcar_du_crtc *rcrtc, u32 reg,
-				 u32 clr, u32 set)
+void rcar_du_crtc_dsysr_clr_set(struct rcar_du_crtc *rcrtc, u32 clr, u32 set)
 {
 	struct rcar_du_device *rcdu = rcrtc->group->dev;
-	u32 value = rcar_du_read(rcdu, rcrtc->mmio_offset + reg);
 
-	rcar_du_write(rcdu, rcrtc->mmio_offset + reg, (value & ~clr) | set);
-}
-
-static int rcar_du_crtc_get(struct rcar_du_crtc *rcrtc)
-{
-	int ret;
-
-	ret = clk_prepare_enable(rcrtc->clock);
-	if (ret < 0)
-		return ret;
-
-	ret = clk_prepare_enable(rcrtc->extclock);
-	if (ret < 0)
-		goto error_clock;
-
-	ret = rcar_du_group_get(rcrtc->group);
-	if (ret < 0)
-		goto error_group;
-
-	return 0;
-
-error_group:
-	clk_disable_unprepare(rcrtc->extclock);
-error_clock:
-	clk_disable_unprepare(rcrtc->clock);
-	return ret;
-}
-
-static void rcar_du_crtc_put(struct rcar_du_crtc *rcrtc)
-{
-	rcar_du_group_put(rcrtc->group);
-
-	clk_disable_unprepare(rcrtc->extclock);
-	clk_disable_unprepare(rcrtc->clock);
+	rcrtc->dsysr = (rcrtc->dsysr & ~clr) | set;
+	rcar_du_write(rcdu, rcrtc->mmio_offset + DSYSR, rcrtc->dsysr);
 }
 
 /* -----------------------------------------------------------------------------
@@ -294,6 +260,14 @@ static void rcar_du_crtc_set_display_timing(struct rcar_du_crtc *rcrtc)
 		rcar_du_group_write(rcrtc->group, DPLLCR, dpllcr);
 
 		escr = ESCR_DCLKSEL_DCLKIN | div;
+	} else if (rcdu->info->lvds_clk_mask & BIT(rcrtc->index)) {
+		/*
+		 * Use the LVDS PLL output as the dot clock when outputting to
+		 * the LVDS encoder on an SoC that supports this clock routing
+		 * option. We use the clock directly in that case, without any
+		 * additional divider.
+		 */
+		escr = ESCR_DCLKSEL_DCLKIN;
 	} else {
 		struct du_clk_params params = { .diff = (unsigned long)-1 };
 
@@ -546,6 +520,51 @@ static void rcar_du_crtc_setup(struct rcar_du_crtc *rcrtc)
 	drm_crtc_vblank_on(&rcrtc->crtc);
 }
 
+static int rcar_du_crtc_get(struct rcar_du_crtc *rcrtc)
+{
+	int ret;
+
+	/*
+	 * Guard against double-get, as the function is called from both the
+	 * .atomic_enable() and .atomic_begin() handlers.
+	 */
+	if (rcrtc->initialized)
+		return 0;
+
+	ret = clk_prepare_enable(rcrtc->clock);
+	if (ret < 0)
+		return ret;
+
+	ret = clk_prepare_enable(rcrtc->extclock);
+	if (ret < 0)
+		goto error_clock;
+
+	ret = rcar_du_group_get(rcrtc->group);
+	if (ret < 0)
+		goto error_group;
+
+	rcar_du_crtc_setup(rcrtc);
+	rcrtc->initialized = true;
+
+	return 0;
+
+error_group:
+	clk_disable_unprepare(rcrtc->extclock);
+error_clock:
+	clk_disable_unprepare(rcrtc->clock);
+	return ret;
+}
+
+static void rcar_du_crtc_put(struct rcar_du_crtc *rcrtc)
+{
+	rcar_du_group_put(rcrtc->group);
+
+	clk_disable_unprepare(rcrtc->extclock);
+	clk_disable_unprepare(rcrtc->clock);
+
+	rcrtc->initialized = false;
+}
+
 static void rcar_du_crtc_start(struct rcar_du_crtc *rcrtc)
 {
 	bool interlaced;
@@ -556,9 +575,9 @@ static void rcar_du_crtc_start(struct rcar_du_crtc *rcrtc)
 	 * actively driven).
 	 */
 	interlaced = rcrtc->crtc.mode.flags & DRM_MODE_FLAG_INTERLACE;
-	rcar_du_crtc_clr_set(rcrtc, DSYSR, DSYSR_TVM_MASK | DSYSR_SCM_MASK,
-			     (interlaced ? DSYSR_SCM_INT_VIDEO : 0) |
-			     DSYSR_TVM_MASTER);
+	rcar_du_crtc_dsysr_clr_set(rcrtc, DSYSR_TVM_MASK | DSYSR_SCM_MASK,
+				   (interlaced ? DSYSR_SCM_INT_VIDEO : 0) |
+				   DSYSR_TVM_MASTER);
 
 	rcar_du_group_start_stop(rcrtc->group, true);
 }
@@ -624,8 +643,13 @@ static void rcar_du_crtc_stop(struct rcar_du_crtc *rcrtc)
 	/*
 	 * Select switch sync mode. This stops display operation and configures
 	 * the HSYNC and VSYNC signals as inputs.
+	 *
+	 * TODO: Find another way to stop the display for DUs that don't support
+	 * TVM sync.
 	 */
-	rcar_du_crtc_clr_set(rcrtc, DSYSR, DSYSR_TVM_MASK, DSYSR_TVM_SWITCH);
+	if (rcar_du_has(rcrtc->group->dev, RCAR_DU_FEATURE_TVM_SYNC))
+		rcar_du_crtc_dsysr_clr_set(rcrtc, DSYSR_TVM_MASK,
+					   DSYSR_TVM_SWITCH);
 
 	rcar_du_group_start_stop(rcrtc->group, false);
 }
@@ -639,16 +663,7 @@ static void rcar_du_crtc_atomic_enable(struct drm_crtc *crtc,
 {
 	struct rcar_du_crtc *rcrtc = to_rcar_crtc(crtc);
 
-	/*
-	 * If the CRTC has already been setup by the .atomic_begin() handler we
-	 * can skip the setup stage.
-	 */
-	if (!rcrtc->initialized) {
-		rcar_du_crtc_get(rcrtc);
-		rcar_du_crtc_setup(rcrtc);
-		rcrtc->initialized = true;
-	}
-
+	rcar_du_crtc_get(rcrtc);
 	rcar_du_crtc_start(rcrtc);
 }
 
@@ -667,7 +682,6 @@ static void rcar_du_crtc_atomic_disable(struct drm_crtc *crtc,
 	}
 	spin_unlock_irq(&crtc->dev->event_lock);
 
-	rcrtc->initialized = false;
 	rcrtc->outputs = 0;
 }
 
@@ -680,14 +694,17 @@ static void rcar_du_crtc_atomic_begin(struct drm_crtc *crtc,
 
 	/*
 	 * If a mode set is in progress we can be called with the CRTC disabled.
-	 * We then need to first setup the CRTC in order to configure planes.
-	 * The .atomic_enable() handler will notice and skip the CRTC setup.
+	 * We thus need to first get and setup the CRTC in order to configure
+	 * planes. We must *not* put the CRTC in .atomic_flush(), as it must be
+	 * kept awake until the .atomic_enable() call that will follow. The get
+	 * operation in .atomic_enable() will in that case be a no-op, and the
+	 * CRTC will be put later in .atomic_disable().
+	 *
+	 * If a mode set is not in progress the CRTC is enabled, and the
+	 * following get call will be a no-op. There is thus no need to belance
+	 * it in .atomic_flush() either.
 	 */
-	if (!rcrtc->initialized) {
-		rcar_du_crtc_get(rcrtc);
-		rcar_du_crtc_setup(rcrtc);
-		rcrtc->initialized = true;
-	}
+	rcar_du_crtc_get(rcrtc);
 
 	if (rcar_du_has(rcrtc->group->dev, RCAR_DU_FEATURE_VSP1_SOURCE))
 		rcar_du_vsp_atomic_begin(rcrtc);
@@ -1108,6 +1125,7 @@ int rcar_du_crtc_create(struct rcar_du_group *rgrp, unsigned int swindex,
 	rcrtc->group = rgrp;
 	rcrtc->mmio_offset = mmio_offsets[hwindex];
 	rcrtc->index = hwindex;
+	rcrtc->dsysr = (rcrtc->index % 2 ? 0 : DSYSR_DRES) | DSYSR_TVM_TVSYNC;
 
 	if (rcar_du_has(rcdu, RCAR_DU_FEATURE_VSP1_SOURCE))
 		primary = &rcrtc->vsp->planes[rcrtc->vsp_pipe].plane;
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_crtc.h b/drivers/gpu/drm/rcar-du/rcar_du_crtc.h
index 4990bbe9ba26..59ac6e7d22c9 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_crtc.h
+++ b/drivers/gpu/drm/rcar-du/rcar_du_crtc.h
@@ -30,6 +30,7 @@ struct rcar_du_vsp;
  * @mmio_offset: offset of the CRTC registers in the DU MMIO block
  * @index: CRTC software and hardware index
  * @initialized: whether the CRTC has been initialized and clocks enabled
+ * @dsysr: cached value of the DSYSR register
  * @vblank_enable: whether vblank events are enabled on this CRTC
  * @event: event to post when the pending page flip completes
  * @flip_wait: wait queue used to signal page flip completion
@@ -50,6 +51,8 @@ struct rcar_du_crtc {
 	unsigned int index;
 	bool initialized;
 
+	u32 dsysr;
+
 	bool vblank_enable;
 	struct drm_pending_vblank_event *event;
 	wait_queue_head_t flip_wait;
@@ -103,4 +106,6 @@ void rcar_du_crtc_route_output(struct drm_crtc *crtc,
 			       enum rcar_du_output output);
 void rcar_du_crtc_finish_page_flip(struct rcar_du_crtc *rcrtc);
 
+void rcar_du_crtc_dsysr_clr_set(struct rcar_du_crtc *rcrtc, u32 clr, u32 set);
+
 #endif /* __RCAR_DU_CRTC_H__ */
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_drv.c b/drivers/gpu/drm/rcar-du/rcar_du_drv.c
index 0954ecd2f943..084f58df4a8c 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_drv.c
+++ b/drivers/gpu/drm/rcar-du/rcar_du_drv.c
@@ -36,7 +36,8 @@ static const struct rcar_du_device_info rzg1_du_r8a7743_info = {
 	.gen = 2,
 	.features = RCAR_DU_FEATURE_CRTC_IRQ_CLOCK
 		  | RCAR_DU_FEATURE_EXT_CTRL_REGS
-		  | RCAR_DU_FEATURE_INTERLACED,
+		  | RCAR_DU_FEATURE_INTERLACED
+		  | RCAR_DU_FEATURE_TVM_SYNC,
 	.channels_mask = BIT(1) | BIT(0),
 	.routes = {
 		/*
@@ -58,7 +59,8 @@ static const struct rcar_du_device_info rzg1_du_r8a7745_info = {
 	.gen = 2,
 	.features = RCAR_DU_FEATURE_CRTC_IRQ_CLOCK
 		  | RCAR_DU_FEATURE_EXT_CTRL_REGS
-		  | RCAR_DU_FEATURE_INTERLACED,
+		  | RCAR_DU_FEATURE_INTERLACED
+		  | RCAR_DU_FEATURE_TVM_SYNC,
 	.channels_mask = BIT(1) | BIT(0),
 	.routes = {
 		/*
@@ -77,7 +79,8 @@ static const struct rcar_du_device_info rzg1_du_r8a7745_info = {
 
 static const struct rcar_du_device_info rcar_du_r8a7779_info = {
 	.gen = 2,
-	.features = RCAR_DU_FEATURE_INTERLACED,
+	.features = RCAR_DU_FEATURE_INTERLACED
+		  | RCAR_DU_FEATURE_TVM_SYNC,
 	.channels_mask = BIT(1) | BIT(0),
 	.routes = {
 		/*
@@ -99,7 +102,8 @@ static const struct rcar_du_device_info rcar_du_r8a7790_info = {
 	.gen = 2,
 	.features = RCAR_DU_FEATURE_CRTC_IRQ_CLOCK
 		  | RCAR_DU_FEATURE_EXT_CTRL_REGS
-		  | RCAR_DU_FEATURE_INTERLACED,
+		  | RCAR_DU_FEATURE_INTERLACED
+		  | RCAR_DU_FEATURE_TVM_SYNC,
 	.quirks = RCAR_DU_QUIRK_ALIGN_128B,
 	.channels_mask = BIT(2) | BIT(1) | BIT(0),
 	.routes = {
@@ -128,7 +132,8 @@ static const struct rcar_du_device_info rcar_du_r8a7791_info = {
 	.gen = 2,
 	.features = RCAR_DU_FEATURE_CRTC_IRQ_CLOCK
 		  | RCAR_DU_FEATURE_EXT_CTRL_REGS
-		  | RCAR_DU_FEATURE_INTERLACED,
+		  | RCAR_DU_FEATURE_INTERLACED
+		  | RCAR_DU_FEATURE_TVM_SYNC,
 	.channels_mask = BIT(1) | BIT(0),
 	.routes = {
 		/*
@@ -151,7 +156,8 @@ static const struct rcar_du_device_info rcar_du_r8a7792_info = {
 	.gen = 2,
 	.features = RCAR_DU_FEATURE_CRTC_IRQ_CLOCK
 		  | RCAR_DU_FEATURE_EXT_CTRL_REGS
-		  | RCAR_DU_FEATURE_INTERLACED,
+		  | RCAR_DU_FEATURE_INTERLACED
+		  | RCAR_DU_FEATURE_TVM_SYNC,
 	.channels_mask = BIT(1) | BIT(0),
 	.routes = {
 		/* R8A7792 has two RGB outputs. */
@@ -170,7 +176,8 @@ static const struct rcar_du_device_info rcar_du_r8a7794_info = {
 	.gen = 2,
 	.features = RCAR_DU_FEATURE_CRTC_IRQ_CLOCK
 		  | RCAR_DU_FEATURE_EXT_CTRL_REGS
-		  | RCAR_DU_FEATURE_INTERLACED,
+		  | RCAR_DU_FEATURE_INTERLACED
+		  | RCAR_DU_FEATURE_TVM_SYNC,
 	.channels_mask = BIT(1) | BIT(0),
 	.routes = {
 		/*
@@ -193,7 +200,8 @@ static const struct rcar_du_device_info rcar_du_r8a7795_info = {
 	.features = RCAR_DU_FEATURE_CRTC_IRQ_CLOCK
 		  | RCAR_DU_FEATURE_EXT_CTRL_REGS
 		  | RCAR_DU_FEATURE_VSP1_SOURCE
-		  | RCAR_DU_FEATURE_INTERLACED,
+		  | RCAR_DU_FEATURE_INTERLACED
+		  | RCAR_DU_FEATURE_TVM_SYNC,
 	.channels_mask = BIT(3) | BIT(2) | BIT(1) | BIT(0),
 	.routes = {
 		/*
@@ -226,7 +234,8 @@ static const struct rcar_du_device_info rcar_du_r8a7796_info = {
 	.features = RCAR_DU_FEATURE_CRTC_IRQ_CLOCK
 		  | RCAR_DU_FEATURE_EXT_CTRL_REGS
 		  | RCAR_DU_FEATURE_VSP1_SOURCE
-		  | RCAR_DU_FEATURE_INTERLACED,
+		  | RCAR_DU_FEATURE_INTERLACED
+		  | RCAR_DU_FEATURE_TVM_SYNC,
 	.channels_mask = BIT(2) | BIT(1) | BIT(0),
 	.routes = {
 		/*
@@ -255,7 +264,8 @@ static const struct rcar_du_device_info rcar_du_r8a77965_info = {
 	.features = RCAR_DU_FEATURE_CRTC_IRQ_CLOCK
 		  | RCAR_DU_FEATURE_EXT_CTRL_REGS
 		  | RCAR_DU_FEATURE_VSP1_SOURCE
-		  | RCAR_DU_FEATURE_INTERLACED,
+		  | RCAR_DU_FEATURE_INTERLACED
+		  | RCAR_DU_FEATURE_TVM_SYNC,
 	.channels_mask = BIT(3) | BIT(1) | BIT(0),
 	.routes = {
 		/*
@@ -284,7 +294,8 @@ static const struct rcar_du_device_info rcar_du_r8a77970_info = {
 	.features = RCAR_DU_FEATURE_CRTC_IRQ_CLOCK
 		  | RCAR_DU_FEATURE_EXT_CTRL_REGS
 		  | RCAR_DU_FEATURE_VSP1_SOURCE
-		  | RCAR_DU_FEATURE_INTERLACED,
+		  | RCAR_DU_FEATURE_INTERLACED
+		  | RCAR_DU_FEATURE_TVM_SYNC,
 	.channels_mask = BIT(0),
 	.routes = {
 		/* R8A77970 has one RGB output and one LVDS output. */
@@ -300,6 +311,34 @@ static const struct rcar_du_device_info rcar_du_r8a77970_info = {
 	.num_lvds = 1,
 };
 
+static const struct rcar_du_device_info rcar_du_r8a7799x_info = {
+	.gen = 3,
+	.features = RCAR_DU_FEATURE_CRTC_IRQ_CLOCK
+		  | RCAR_DU_FEATURE_EXT_CTRL_REGS
+		  | RCAR_DU_FEATURE_VSP1_SOURCE,
+	.channels_mask = BIT(1) | BIT(0),
+	.routes = {
+		/*
+		 * R8A77990 and R8A77995 have one RGB output and two LVDS
+		 * outputs.
+		 */
+		[RCAR_DU_OUTPUT_DPAD0] = {
+			.possible_crtcs = BIT(0) | BIT(1),
+			.port = 0,
+		},
+		[RCAR_DU_OUTPUT_LVDS0] = {
+			.possible_crtcs = BIT(0),
+			.port = 1,
+		},
+		[RCAR_DU_OUTPUT_LVDS1] = {
+			.possible_crtcs = BIT(1),
+			.port = 2,
+		},
+	},
+	.num_lvds = 2,
+	.lvds_clk_mask =  BIT(1) | BIT(0),
+};
+
 static const struct of_device_id rcar_du_of_table[] = {
 	{ .compatible = "renesas,du-r8a7743", .data = &rzg1_du_r8a7743_info },
 	{ .compatible = "renesas,du-r8a7745", .data = &rzg1_du_r8a7745_info },
@@ -313,6 +352,8 @@ static const struct of_device_id rcar_du_of_table[] = {
 	{ .compatible = "renesas,du-r8a7796", .data = &rcar_du_r8a7796_info },
 	{ .compatible = "renesas,du-r8a77965", .data = &rcar_du_r8a77965_info },
 	{ .compatible = "renesas,du-r8a77970", .data = &rcar_du_r8a77970_info },
+	{ .compatible = "renesas,du-r8a77990", .data = &rcar_du_r8a7799x_info },
+	{ .compatible = "renesas,du-r8a77995", .data = &rcar_du_r8a7799x_info },
 	{ }
 };
 
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_drv.h b/drivers/gpu/drm/rcar-du/rcar_du_drv.h
index fef9ea5c22f3..143c037e2c0f 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_drv.h
+++ b/drivers/gpu/drm/rcar-du/rcar_du_drv.h
@@ -27,6 +27,7 @@ struct rcar_du_device;
 #define RCAR_DU_FEATURE_EXT_CTRL_REGS	BIT(1)	/* Has extended control registers */
 #define RCAR_DU_FEATURE_VSP1_SOURCE	BIT(2)	/* Has inputs from VSP1 */
 #define RCAR_DU_FEATURE_INTERLACED	BIT(3)	/* HW supports interlaced */
+#define RCAR_DU_FEATURE_TVM_SYNC	BIT(4)	/* Has TV switch/sync modes */
 
 #define RCAR_DU_QUIRK_ALIGN_128B	BIT(0)	/* Align pitches to 128 bytes */
 
@@ -53,6 +54,7 @@ struct rcar_du_output_routing {
  * @routes: array of CRTC to output routes, indexed by output (RCAR_DU_OUTPUT_*)
  * @num_lvds: number of internal LVDS encoders
  * @dpll_mask: bit mask of DU channels equipped with a DPLL
+ * @lvds_clk_mask: bitmask of channels that can use the LVDS clock as dot clock
  */
 struct rcar_du_device_info {
 	unsigned int gen;
@@ -62,6 +64,7 @@ struct rcar_du_device_info {
 	struct rcar_du_output_routing routes[RCAR_DU_OUTPUT_MAX];
 	unsigned int num_lvds;
 	unsigned int dpll_mask;
+	unsigned int lvds_clk_mask;
 };
 
 #define RCAR_DU_MAX_CRTCS		4
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_group.c b/drivers/gpu/drm/rcar-du/rcar_du_group.c
index ef2c177afb6d..d85f0a1c1581 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_group.c
+++ b/drivers/gpu/drm/rcar-du/rcar_du_group.c
@@ -56,8 +56,6 @@ static void rcar_du_group_setup_pins(struct rcar_du_group *rgrp)
 static void rcar_du_group_setup_defr8(struct rcar_du_group *rgrp)
 {
 	struct rcar_du_device *rcdu = rgrp->dev;
-	unsigned int possible_crtcs =
-		rcdu->info->routes[RCAR_DU_OUTPUT_DPAD0].possible_crtcs;
 	u32 defr8 = DEFR8_CODE;
 
 	if (rcdu->info->gen < 3) {
@@ -69,26 +67,71 @@ static void rcar_du_group_setup_defr8(struct rcar_du_group *rgrp)
 		 * DU instances that support it.
 		 */
 		if (rgrp->index == 0) {
-			if (possible_crtcs > 1)
-				defr8 |= DEFR8_DRGBS_DU(rcdu->dpad0_source);
+			defr8 |= DEFR8_DRGBS_DU(rcdu->dpad0_source);
 			if (rgrp->dev->vspd1_sink == 2)
 				defr8 |= DEFR8_VSCS;
 		}
 	} else {
 		/*
-		 * On Gen3 VSPD routing can't be configured, but DPAD routing
-		 * needs to be set despite having a single option available.
+		 * On Gen3 VSPD routing can't be configured, and DPAD routing
+		 * is set in the group corresponding to the DPAD output (no Gen3
+		 * SoC has multiple DPAD sources belonging to separate groups).
 		 */
-		unsigned int rgb_crtc = ffs(possible_crtcs) - 1;
-		struct rcar_du_crtc *crtc = &rcdu->crtcs[rgb_crtc];
-
-		if (crtc->index / 2 == rgrp->index)
-			defr8 |= DEFR8_DRGBS_DU(crtc->index);
+		if (rgrp->index == rcdu->dpad0_source / 2)
+			defr8 |= DEFR8_DRGBS_DU(rcdu->dpad0_source);
 	}
 
 	rcar_du_group_write(rgrp, DEFR8, defr8);
 }
 
+static void rcar_du_group_setup_didsr(struct rcar_du_group *rgrp)
+{
+	struct rcar_du_device *rcdu = rgrp->dev;
+	struct rcar_du_crtc *rcrtc;
+	unsigned int num_crtcs = 0;
+	unsigned int i;
+	u32 didsr;
+
+	/*
+	 * Configure input dot clock routing with a hardcoded configuration. If
+	 * the DU channel can use the LVDS encoder output clock as the dot
+	 * clock, do so. Otherwise route DU_DOTCLKINn signal to DUn.
+	 *
+	 * Each channel can then select between the dot clock configured here
+	 * and the clock provided by the CPG through the ESCR register.
+	 */
+	if (rcdu->info->gen < 3 && rgrp->index == 0) {
+		/*
+		 * On Gen2 a single register in the first group controls dot
+		 * clock selection for all channels.
+		 */
+		rcrtc = rcdu->crtcs;
+		num_crtcs = rcdu->num_crtcs;
+	} else if (rcdu->info->gen == 3 && rgrp->num_crtcs > 1) {
+		/*
+		 * On Gen3 dot clocks are setup through per-group registers,
+		 * only available when the group has two channels.
+		 */
+		rcrtc = &rcdu->crtcs[rgrp->index * 2];
+		num_crtcs = rgrp->num_crtcs;
+	}
+
+	if (!num_crtcs)
+		return;
+
+	didsr = DIDSR_CODE;
+	for (i = 0; i < num_crtcs; ++i, ++rcrtc) {
+		if (rcdu->info->lvds_clk_mask & BIT(rcrtc->index))
+			didsr |= DIDSR_LCDS_LVDS0(i)
+			      |  DIDSR_PDCS_CLK(i, 0);
+		else
+			didsr |= DIDSR_LCDS_DCLKIN(i)
+			      |  DIDSR_PDCS_CLK(i, 0);
+	}
+
+	rcar_du_group_write(rgrp, DIDSR, didsr);
+}
+
 static void rcar_du_group_setup(struct rcar_du_group *rgrp)
 {
 	struct rcar_du_device *rcdu = rgrp->dev;
@@ -106,21 +149,7 @@ static void rcar_du_group_setup(struct rcar_du_group *rgrp)
 
 	if (rcar_du_has(rgrp->dev, RCAR_DU_FEATURE_EXT_CTRL_REGS)) {
 		rcar_du_group_setup_defr8(rgrp);
-
-		/*
-		 * Configure input dot clock routing. We currently hardcode the
-		 * configuration to routing DOTCLKINn to DUn. Register fields
-		 * depend on the DU generation, but the resulting value is 0 in
-		 * all cases.
-		 *
-		 * On Gen2 a single register in the first group controls dot
-		 * clock selection for all channels, while on Gen3 dot clocks
-		 * are setup through per-group registers, only available when
-		 * the group has two channels.
-		 */
-		if ((rcdu->info->gen < 3 && rgrp->index == 0) ||
-		    (rcdu->info->gen == 3 &&  rgrp->num_crtcs > 1))
-			rcar_du_group_write(rgrp, DIDSR, DIDSR_CODE);
+		rcar_du_group_setup_didsr(rgrp);
 	}
 
 	if (rcdu->info->gen >= 3)
@@ -173,9 +202,10 @@ void rcar_du_group_put(struct rcar_du_group *rgrp)
 
 static void __rcar_du_group_start_stop(struct rcar_du_group *rgrp, bool start)
 {
-	rcar_du_group_write(rgrp, DSYSR,
-		(rcar_du_group_read(rgrp, DSYSR) & ~(DSYSR_DRES | DSYSR_DEN)) |
-		(start ? DSYSR_DEN : DSYSR_DRES));
+	struct rcar_du_crtc *rcrtc = &rgrp->dev->crtcs[rgrp->index * 2];
+
+	rcar_du_crtc_dsysr_clr_set(rcrtc, DSYSR_DRES | DSYSR_DEN,
+				   start ? DSYSR_DEN : DSYSR_DRES);
 }
 
 void rcar_du_group_start_stop(struct rcar_du_group *rgrp, bool start)
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_kms.c b/drivers/gpu/drm/rcar-du/rcar_du_kms.c
index b5d79ecd25ea..4ebd61ecbee1 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_kms.c
+++ b/drivers/gpu/drm/rcar-du/rcar_du_kms.c
@@ -544,6 +544,7 @@ int rcar_du_modeset_init(struct rcar_du_device *rcdu)
 	struct drm_device *dev = rcdu->ddev;
 	struct drm_encoder *encoder;
 	struct drm_fbdev_cma *fbdev;
+	unsigned int dpad0_sources;
 	unsigned int num_encoders;
 	unsigned int num_groups;
 	unsigned int swindex;
@@ -666,6 +667,17 @@ int rcar_du_modeset_init(struct rcar_du_device *rcdu)
 		encoder->possible_clones = (1 << num_encoders) - 1;
 	}
 
+	/*
+	 * Initialize the default DPAD0 source to the index of the first DU
+	 * channel that can be connected to DPAD0. The exact value doesn't
+	 * matter as it should be overwritten by mode setting for the RGB
+	 * output, but it is nonetheless required to ensure a valid initial
+	 * hardware configuration on Gen3 where DU0 can't always be connected to
+	 * DPAD0.
+	 */
+	dpad0_sources = rcdu->info->routes[RCAR_DU_OUTPUT_DPAD0].possible_crtcs;
+	rcdu->dpad0_source = ffs(dpad0_sources) - 1;
+
 	drm_mode_config_reset(dev);
 
 	drm_kms_helper_poll_init(dev);
diff --git a/drivers/gpu/drm/rcar-du/rcar_lvds.c b/drivers/gpu/drm/rcar-du/rcar_lvds.c
index ce0eb68c3416..173d7ad0b991 100644
--- a/drivers/gpu/drm/rcar-du/rcar_lvds.c
+++ b/drivers/gpu/drm/rcar-du/rcar_lvds.c
@@ -24,6 +24,8 @@
 
 #include "rcar_lvds_regs.h"
 
+struct rcar_lvds;
+
 /* Keep in sync with the LVDCR0.LVMD hardware register values. */
 enum rcar_lvds_mode {
 	RCAR_LVDS_MODE_JEIDA = 0,
@@ -31,14 +33,16 @@ enum rcar_lvds_mode {
 	RCAR_LVDS_MODE_VESA = 4,
 };
 
-#define RCAR_LVDS_QUIRK_LANES	(1 << 0)	/* LVDS lanes 1 and 3 inverted */
-#define RCAR_LVDS_QUIRK_GEN2_PLLCR (1 << 1)	/* LVDPLLCR has gen2 layout */
-#define RCAR_LVDS_QUIRK_GEN3_LVEN (1 << 2)	/* LVEN bit needs to be set */
-						/* on R8A77970/R8A7799x */
+#define RCAR_LVDS_QUIRK_LANES		BIT(0)	/* LVDS lanes 1 and 3 inverted */
+#define RCAR_LVDS_QUIRK_GEN3_LVEN	BIT(1)	/* LVEN bit needs to be set on R8A77970/R8A7799x */
+#define RCAR_LVDS_QUIRK_PWD		BIT(2)	/* PWD bit available (all of Gen3 but E3) */
+#define RCAR_LVDS_QUIRK_EXT_PLL		BIT(3)	/* Has extended PLL */
+#define RCAR_LVDS_QUIRK_DUAL_LINK	BIT(4)	/* Supports dual-link operation */
 
 struct rcar_lvds_device_info {
 	unsigned int gen;
 	unsigned int quirks;
+	void (*pll_setup)(struct rcar_lvds *lvds, unsigned int freq);
 };
 
 struct rcar_lvds {
@@ -52,7 +56,11 @@ struct rcar_lvds {
 	struct drm_panel *panel;
 
 	void __iomem *mmio;
-	struct clk *clock;
+	struct {
+		struct clk *mod;		/* CPG module clock */
+		struct clk *extal;		/* External clock */
+		struct clk *dotclkin[2];	/* External DU clocks */
+	} clocks;
 	bool enabled;
 
 	struct drm_display_mode display_mode;
@@ -128,33 +136,216 @@ static const struct drm_connector_funcs rcar_lvds_conn_funcs = {
 };
 
 /* -----------------------------------------------------------------------------
- * Bridge
+ * PLL Setup
  */
 
-static u32 rcar_lvds_lvdpllcr_gen2(unsigned int freq)
+static void rcar_lvds_pll_setup_gen2(struct rcar_lvds *lvds, unsigned int freq)
 {
-	if (freq < 39000)
-		return LVDPLLCR_CEEN | LVDPLLCR_COSEL | LVDPLLCR_PLLDLYCNT_38M;
-	else if (freq < 61000)
-		return LVDPLLCR_CEEN | LVDPLLCR_COSEL | LVDPLLCR_PLLDLYCNT_60M;
-	else if (freq < 121000)
-		return LVDPLLCR_CEEN | LVDPLLCR_COSEL | LVDPLLCR_PLLDLYCNT_121M;
+	u32 val;
+
+	if (freq < 39000000)
+		val = LVDPLLCR_CEEN | LVDPLLCR_COSEL | LVDPLLCR_PLLDLYCNT_38M;
+	else if (freq < 61000000)
+		val = LVDPLLCR_CEEN | LVDPLLCR_COSEL | LVDPLLCR_PLLDLYCNT_60M;
+	else if (freq < 121000000)
+		val = LVDPLLCR_CEEN | LVDPLLCR_COSEL | LVDPLLCR_PLLDLYCNT_121M;
 	else
-		return LVDPLLCR_PLLDLYCNT_150M;
+		val = LVDPLLCR_PLLDLYCNT_150M;
+
+	rcar_lvds_write(lvds, LVDPLLCR, val);
 }
 
-static u32 rcar_lvds_lvdpllcr_gen3(unsigned int freq)
+static void rcar_lvds_pll_setup_gen3(struct rcar_lvds *lvds, unsigned int freq)
 {
-	if (freq < 42000)
-		return LVDPLLCR_PLLDIVCNT_42M;
-	else if (freq < 85000)
-		return LVDPLLCR_PLLDIVCNT_85M;
-	else if (freq < 128000)
-		return LVDPLLCR_PLLDIVCNT_128M;
+	u32 val;
+
+	if (freq < 42000000)
+		val = LVDPLLCR_PLLDIVCNT_42M;
+	else if (freq < 85000000)
+		val = LVDPLLCR_PLLDIVCNT_85M;
+	else if (freq < 128000000)
+		val = LVDPLLCR_PLLDIVCNT_128M;
 	else
-		return LVDPLLCR_PLLDIVCNT_148M;
+		val = LVDPLLCR_PLLDIVCNT_148M;
+
+	rcar_lvds_write(lvds, LVDPLLCR, val);
 }
 
+struct pll_info {
+	unsigned long diff;
+	unsigned int pll_m;
+	unsigned int pll_n;
+	unsigned int pll_e;
+	unsigned int div;
+	u32 clksel;
+};
+
+static void rcar_lvds_d3_e3_pll_calc(struct rcar_lvds *lvds, struct clk *clk,
+				     unsigned long target, struct pll_info *pll,
+				     u32 clksel)
+{
+	unsigned long output;
+	unsigned long fin;
+	unsigned int m_min;
+	unsigned int m_max;
+	unsigned int m;
+	int error;
+
+	if (!clk)
+		return;
+
+	/*
+	 * The LVDS PLL is made of a pre-divider and a multiplier (strangely
+	 * enough called M and N respectively), followed by a post-divider E.
+	 *
+	 *         ,-----.         ,-----.     ,-----.         ,-----.
+	 * Fin --> | 1/M | -Fpdf-> | PFD | --> | VCO | -Fvco-> | 1/E | --> Fout
+	 *         `-----'     ,-> |     |     `-----'   |     `-----'
+	 *                     |   `-----'               |
+	 *                     |         ,-----.         |
+	 *                     `-------- | 1/N | <-------'
+	 *                               `-----'
+	 *
+	 * The clock output by the PLL is then further divided by a programmable
+	 * divider DIV to achieve the desired target frequency. Finally, an
+	 * optional fixed /7 divider is used to convert the bit clock to a pixel
+	 * clock (as LVDS transmits 7 bits per lane per clock sample).
+	 *
+	 *          ,-------.     ,-----.     |\
+	 * Fout --> | 1/DIV | --> | 1/7 | --> | |
+	 *          `-------'  |  `-----'     | | --> dot clock
+	 *                     `------------> | |
+	 *                                    |/
+	 *
+	 * The /7 divider is optional when the LVDS PLL is used to generate a
+	 * dot clock for the DU RGB output, without using the LVDS encoder. We
+	 * don't support this configuration yet.
+	 *
+	 * The PLL allowed input frequency range is 12 MHz to 192 MHz.
+	 */
+
+	fin = clk_get_rate(clk);
+	if (fin < 12000000 || fin > 192000000)
+		return;
+
+	/*
+	 * The comparison frequency range is 12 MHz to 24 MHz, which limits the
+	 * allowed values for the pre-divider M (normal range 1-8).
+	 *
+	 * Fpfd = Fin / M
+	 */
+	m_min = max_t(unsigned int, 1, DIV_ROUND_UP(fin, 24000000));
+	m_max = min_t(unsigned int, 8, fin / 12000000);
+
+	for (m = m_min; m <= m_max; ++m) {
+		unsigned long fpfd;
+		unsigned int n_min;
+		unsigned int n_max;
+		unsigned int n;
+
+		/*
+		 * The VCO operating range is 900 Mhz to 1800 MHz, which limits
+		 * the allowed values for the multiplier N (normal range
+		 * 60-120).
+		 *
+		 * Fvco = Fin * N / M
+		 */
+		fpfd = fin / m;
+		n_min = max_t(unsigned int, 60, DIV_ROUND_UP(900000000, fpfd));
+		n_max = min_t(unsigned int, 120, 1800000000 / fpfd);
+
+		for (n = n_min; n < n_max; ++n) {
+			unsigned long fvco;
+			unsigned int e_min;
+			unsigned int e;
+
+			/*
+			 * The output frequency is limited to 1039.5 MHz,
+			 * limiting again the allowed values for the
+			 * post-divider E (normal value 1, 2 or 4).
+			 *
+			 * Fout = Fvco / E
+			 */
+			fvco = fpfd * n;
+			e_min = fvco > 1039500000 ? 1 : 0;
+
+			for (e = e_min; e < 3; ++e) {
+				unsigned long fout;
+				unsigned long diff;
+				unsigned int div;
+
+				/*
+				 * Finally we have a programable divider after
+				 * the PLL, followed by a an optional fixed /7
+				 * divider.
+				 */
+				fout = fvco / (1 << e) / 7;
+				div = DIV_ROUND_CLOSEST(fout, target);
+				diff = abs(fout / div - target);
+
+				if (diff < pll->diff) {
+					pll->diff = diff;
+					pll->pll_m = m;
+					pll->pll_n = n;
+					pll->pll_e = e;
+					pll->div = div;
+					pll->clksel = clksel;
+
+					if (diff == 0)
+						goto done;
+				}
+			}
+		}
+	}
+
+done:
+	output = fin * pll->pll_n / pll->pll_m / (1 << pll->pll_e)
+	       / 7 / pll->div;
+	error = (long)(output - target) * 10000 / (long)target;
+
+	dev_dbg(lvds->dev,
+		"%pC %lu Hz -> Fout %lu Hz (target %lu Hz, error %d.%02u%%), PLL M/N/E/DIV %u/%u/%u/%u\n",
+		clk, fin, output, target, error / 100,
+		error < 0 ? -error % 100 : error % 100,
+		pll->pll_m, pll->pll_n, pll->pll_e, pll->div);
+}
+
+static void rcar_lvds_pll_setup_d3_e3(struct rcar_lvds *lvds, unsigned int freq)
+{
+	struct pll_info pll = { .diff = (unsigned long)-1 };
+	u32 lvdpllcr;
+
+	rcar_lvds_d3_e3_pll_calc(lvds, lvds->clocks.dotclkin[0], freq, &pll,
+				 LVDPLLCR_CKSEL_DU_DOTCLKIN(0));
+	rcar_lvds_d3_e3_pll_calc(lvds, lvds->clocks.dotclkin[1], freq, &pll,
+				 LVDPLLCR_CKSEL_DU_DOTCLKIN(1));
+	rcar_lvds_d3_e3_pll_calc(lvds, lvds->clocks.extal, freq, &pll,
+				 LVDPLLCR_CKSEL_EXTAL);
+
+	lvdpllcr = LVDPLLCR_PLLON | pll.clksel | LVDPLLCR_CLKOUT
+		 | LVDPLLCR_PLLN(pll.pll_n - 1) | LVDPLLCR_PLLM(pll.pll_m - 1);
+
+	if (pll.pll_e > 0)
+		lvdpllcr |= LVDPLLCR_STP_CLKOUTE | LVDPLLCR_OUTCLKSEL
+			 |  LVDPLLCR_PLLE(pll.pll_e - 1);
+
+	rcar_lvds_write(lvds, LVDPLLCR, lvdpllcr);
+
+	if (pll.div > 1)
+		/*
+		 * The DIVRESET bit is a misnomer, setting it to 1 deasserts the
+		 * divisor reset.
+		 */
+		rcar_lvds_write(lvds, LVDDIV, LVDDIV_DIVSEL |
+				LVDDIV_DIVRESET | LVDDIV_DIV(pll.div - 1));
+	else
+		rcar_lvds_write(lvds, LVDDIV, 0);
+}
+
+/* -----------------------------------------------------------------------------
+ * Bridge
+ */
+
 static void rcar_lvds_enable(struct drm_bridge *bridge)
 {
 	struct rcar_lvds *lvds = bridge_to_rcar_lvds(bridge);
@@ -164,14 +355,13 @@ static void rcar_lvds_enable(struct drm_bridge *bridge)
 	 * do we get a state pointer?
 	 */
 	struct drm_crtc *crtc = lvds->bridge.encoder->crtc;
-	u32 lvdpllcr;
 	u32 lvdhcr;
 	u32 lvdcr0;
 	int ret;
 
 	WARN_ON(lvds->enabled);
 
-	ret = clk_prepare_enable(lvds->clock);
+	ret = clk_prepare_enable(lvds->clocks.mod);
 	if (ret < 0)
 		return;
 
@@ -196,12 +386,13 @@ static void rcar_lvds_enable(struct drm_bridge *bridge)
 
 	rcar_lvds_write(lvds, LVDCHCR, lvdhcr);
 
+	if (lvds->info->quirks & RCAR_LVDS_QUIRK_DUAL_LINK) {
+		/* Disable dual-link mode. */
+		rcar_lvds_write(lvds, LVDSTRIPE, 0);
+	}
+
 	/* PLL clock configuration. */
-	if (lvds->info->quirks & RCAR_LVDS_QUIRK_GEN2_PLLCR)
-		lvdpllcr = rcar_lvds_lvdpllcr_gen2(mode->clock);
-	else
-		lvdpllcr = rcar_lvds_lvdpllcr_gen3(mode->clock);
-	rcar_lvds_write(lvds, LVDPLLCR, lvdpllcr);
+	lvds->info->pll_setup(lvds, mode->clock * 1000);
 
 	/* Set the LVDS mode and select the input. */
 	lvdcr0 = lvds->mode << LVDCR0_LVMD_SHIFT;
@@ -220,11 +411,16 @@ static void rcar_lvds_enable(struct drm_bridge *bridge)
 		rcar_lvds_write(lvds, LVDCR0, lvdcr0);
 	}
 
-	/* Turn the PLL on. */
-	lvdcr0 |= LVDCR0_PLLON;
-	rcar_lvds_write(lvds, LVDCR0, lvdcr0);
+	if (!(lvds->info->quirks & RCAR_LVDS_QUIRK_EXT_PLL)) {
+		/*
+		 * Turn the PLL on (simple PLL only, extended PLL is fully
+		 * controlled through LVDPLLCR).
+		 */
+		lvdcr0 |= LVDCR0_PLLON;
+		rcar_lvds_write(lvds, LVDCR0, lvdcr0);
+	}
 
-	if (lvds->info->gen > 2) {
+	if (lvds->info->quirks & RCAR_LVDS_QUIRK_PWD) {
 		/* Set LVDS normal mode. */
 		lvdcr0 |= LVDCR0_PWD;
 		rcar_lvds_write(lvds, LVDCR0, lvdcr0);
@@ -236,8 +432,10 @@ static void rcar_lvds_enable(struct drm_bridge *bridge)
 		rcar_lvds_write(lvds, LVDCR0, lvdcr0);
 	}
 
-	/* Wait for the startup delay. */
-	usleep_range(100, 150);
+	if (!(lvds->info->quirks & RCAR_LVDS_QUIRK_EXT_PLL)) {
+		/* Wait for the PLL startup delay (simple PLL only). */
+		usleep_range(100, 150);
+	}
 
 	/* Turn the output on. */
 	lvdcr0 |= LVDCR0_LVRES;
@@ -264,8 +462,9 @@ static void rcar_lvds_disable(struct drm_bridge *bridge)
 
 	rcar_lvds_write(lvds, LVDCR0, 0);
 	rcar_lvds_write(lvds, LVDCR1, 0);
+	rcar_lvds_write(lvds, LVDPLLCR, 0);
 
-	clk_disable_unprepare(lvds->clock);
+	clk_disable_unprepare(lvds->clocks.mod);
 
 	lvds->enabled = false;
 }
@@ -446,6 +645,60 @@ done:
 	return ret;
 }
 
+static struct clk *rcar_lvds_get_clock(struct rcar_lvds *lvds, const char *name,
+				       bool optional)
+{
+	struct clk *clk;
+
+	clk = devm_clk_get(lvds->dev, name);
+	if (!IS_ERR(clk))
+		return clk;
+
+	if (PTR_ERR(clk) == -ENOENT && optional)
+		return NULL;
+
+	if (PTR_ERR(clk) != -EPROBE_DEFER)
+		dev_err(lvds->dev, "failed to get %s clock\n",
+			name ? name : "module");
+
+	return clk;
+}
+
+static int rcar_lvds_get_clocks(struct rcar_lvds *lvds)
+{
+	lvds->clocks.mod = rcar_lvds_get_clock(lvds, NULL, false);
+	if (IS_ERR(lvds->clocks.mod))
+		return PTR_ERR(lvds->clocks.mod);
+
+	/*
+	 * LVDS encoders without an extended PLL have no external clock inputs.
+	 */
+	if (!(lvds->info->quirks & RCAR_LVDS_QUIRK_EXT_PLL))
+		return 0;
+
+	lvds->clocks.extal = rcar_lvds_get_clock(lvds, "extal", true);
+	if (IS_ERR(lvds->clocks.extal))
+		return PTR_ERR(lvds->clocks.extal);
+
+	lvds->clocks.dotclkin[0] = rcar_lvds_get_clock(lvds, "dclkin.0", true);
+	if (IS_ERR(lvds->clocks.dotclkin[0]))
+		return PTR_ERR(lvds->clocks.dotclkin[0]);
+
+	lvds->clocks.dotclkin[1] = rcar_lvds_get_clock(lvds, "dclkin.1", true);
+	if (IS_ERR(lvds->clocks.dotclkin[1]))
+		return PTR_ERR(lvds->clocks.dotclkin[1]);
+
+	/* At least one input to the PLL must be available. */
+	if (!lvds->clocks.extal && !lvds->clocks.dotclkin[0] &&
+	    !lvds->clocks.dotclkin[1]) {
+		dev_err(lvds->dev,
+			"no input clock (extal, dclkin.0 or dclkin.1)\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
 static int rcar_lvds_probe(struct platform_device *pdev)
 {
 	struct rcar_lvds *lvds;
@@ -475,11 +728,9 @@ static int rcar_lvds_probe(struct platform_device *pdev)
 	if (IS_ERR(lvds->mmio))
 		return PTR_ERR(lvds->mmio);
 
-	lvds->clock = devm_clk_get(&pdev->dev, NULL);
-	if (IS_ERR(lvds->clock)) {
-		dev_err(&pdev->dev, "failed to get clock\n");
-		return PTR_ERR(lvds->clock);
-	}
+	ret = rcar_lvds_get_clocks(lvds);
+	if (ret < 0)
+		return ret;
 
 	drm_bridge_add(&lvds->bridge);
 
@@ -497,21 +748,39 @@ static int rcar_lvds_remove(struct platform_device *pdev)
 
 static const struct rcar_lvds_device_info rcar_lvds_gen2_info = {
 	.gen = 2,
-	.quirks = RCAR_LVDS_QUIRK_GEN2_PLLCR,
+	.pll_setup = rcar_lvds_pll_setup_gen2,
 };
 
 static const struct rcar_lvds_device_info rcar_lvds_r8a7790_info = {
 	.gen = 2,
-	.quirks = RCAR_LVDS_QUIRK_GEN2_PLLCR | RCAR_LVDS_QUIRK_LANES,
+	.quirks = RCAR_LVDS_QUIRK_LANES,
+	.pll_setup = rcar_lvds_pll_setup_gen2,
 };
 
 static const struct rcar_lvds_device_info rcar_lvds_gen3_info = {
 	.gen = 3,
+	.quirks = RCAR_LVDS_QUIRK_PWD,
+	.pll_setup = rcar_lvds_pll_setup_gen3,
 };
 
 static const struct rcar_lvds_device_info rcar_lvds_r8a77970_info = {
 	.gen = 3,
-	.quirks = RCAR_LVDS_QUIRK_GEN2_PLLCR | RCAR_LVDS_QUIRK_GEN3_LVEN,
+	.quirks = RCAR_LVDS_QUIRK_PWD | RCAR_LVDS_QUIRK_GEN3_LVEN,
+	.pll_setup = rcar_lvds_pll_setup_gen2,
+};
+
+static const struct rcar_lvds_device_info rcar_lvds_r8a77990_info = {
+	.gen = 3,
+	.quirks = RCAR_LVDS_QUIRK_GEN3_LVEN | RCAR_LVDS_QUIRK_EXT_PLL
+		| RCAR_LVDS_QUIRK_DUAL_LINK,
+	.pll_setup = rcar_lvds_pll_setup_d3_e3,
+};
+
+static const struct rcar_lvds_device_info rcar_lvds_r8a77995_info = {
+	.gen = 3,
+	.quirks = RCAR_LVDS_QUIRK_GEN3_LVEN | RCAR_LVDS_QUIRK_PWD
+		| RCAR_LVDS_QUIRK_EXT_PLL | RCAR_LVDS_QUIRK_DUAL_LINK,
+	.pll_setup = rcar_lvds_pll_setup_d3_e3,
 };
 
 static const struct of_device_id rcar_lvds_of_table[] = {
@@ -523,6 +792,8 @@ static const struct of_device_id rcar_lvds_of_table[] = {
 	{ .compatible = "renesas,r8a7796-lvds", .data = &rcar_lvds_gen3_info },
 	{ .compatible = "renesas,r8a77970-lvds", .data = &rcar_lvds_r8a77970_info },
 	{ .compatible = "renesas,r8a77980-lvds", .data = &rcar_lvds_gen3_info },
+	{ .compatible = "renesas,r8a77990-lvds", .data = &rcar_lvds_r8a77990_info },
+	{ .compatible = "renesas,r8a77995-lvds", .data = &rcar_lvds_r8a77995_info },
 	{ }
 };
 
diff --git a/drivers/gpu/drm/rcar-du/rcar_lvds_regs.h b/drivers/gpu/drm/rcar-du/rcar_lvds_regs.h
index 4870f50d9bec..87149f2f8056 100644
--- a/drivers/gpu/drm/rcar-du/rcar_lvds_regs.h
+++ b/drivers/gpu/drm/rcar-du/rcar_lvds_regs.h
@@ -18,7 +18,7 @@
 #define LVDCR0_PLLON			(1 << 4)
 #define LVDCR0_PWD			(1 << 2)		/* Gen3 only */
 #define LVDCR0_BEN			(1 << 2)		/* Gen2 only */
-#define LVDCR0_LVEN			(1 << 1)		/* Gen2 only */
+#define LVDCR0_LVEN			(1 << 1)
 #define LVDCR0_LVRES			(1 << 0)
 
 #define LVDCR1				0x0004
@@ -27,21 +27,36 @@
 #define LVDCR1_CLKSTBY			(3 << 0)
 
 #define LVDPLLCR			0x0008
+/* Gen2 & V3M */
 #define LVDPLLCR_CEEN			(1 << 14)
 #define LVDPLLCR_FBEN			(1 << 13)
 #define LVDPLLCR_COSEL			(1 << 12)
-/* Gen2 */
 #define LVDPLLCR_PLLDLYCNT_150M		(0x1bf << 0)
 #define LVDPLLCR_PLLDLYCNT_121M		(0x22c << 0)
 #define LVDPLLCR_PLLDLYCNT_60M		(0x77b << 0)
 #define LVDPLLCR_PLLDLYCNT_38M		(0x69a << 0)
 #define LVDPLLCR_PLLDLYCNT_MASK		(0x7ff << 0)
-/* Gen3 */
+/* Gen3 but V3M,D3 and E3 */
 #define LVDPLLCR_PLLDIVCNT_42M		(0x014cb << 0)
 #define LVDPLLCR_PLLDIVCNT_85M		(0x00a45 << 0)
 #define LVDPLLCR_PLLDIVCNT_128M		(0x006c3 << 0)
 #define LVDPLLCR_PLLDIVCNT_148M		(0x046c1 << 0)
 #define LVDPLLCR_PLLDIVCNT_MASK		(0x7ffff << 0)
+/* D3 and E3 */
+#define LVDPLLCR_PLLON			(1 << 22)
+#define LVDPLLCR_PLLSEL_PLL0		(0 << 20)
+#define LVDPLLCR_PLLSEL_LVX		(1 << 20)
+#define LVDPLLCR_PLLSEL_PLL1		(2 << 20)
+#define LVDPLLCR_CKSEL_LVX		(1 << 17)
+#define LVDPLLCR_CKSEL_EXTAL		(3 << 17)
+#define LVDPLLCR_CKSEL_DU_DOTCLKIN(n)	((5 + (n) * 2) << 17)
+#define LVDPLLCR_OCKSEL			(1 << 16)
+#define LVDPLLCR_STP_CLKOUTE		(1 << 14)
+#define LVDPLLCR_OUTCLKSEL		(1 << 12)
+#define LVDPLLCR_CLKOUT			(1 << 11)
+#define LVDPLLCR_PLLE(n)		((n) << 10)
+#define LVDPLLCR_PLLN(n)		((n) << 3)
+#define LVDPLLCR_PLLM(n)		((n) << 0)
 
 #define LVDCTRCR			0x000c
 #define LVDCTRCR_CTR3SEL_ZERO		(0 << 12)
@@ -71,4 +86,26 @@
 #define LVDCHCR_CHSEL_CH(n, c)		((((c) - (n)) & 3) << ((n) * 4))
 #define LVDCHCR_CHSEL_MASK(n)		(3 << ((n) * 4))
 
+/* All registers below are specific to D3 and E3 */
+#define LVDSTRIPE			0x0014
+#define LVDSTRIPE_ST_TRGSEL_DISP	(0 << 2)
+#define LVDSTRIPE_ST_TRGSEL_HSYNC_R	(1 << 2)
+#define LVDSTRIPE_ST_TRGSEL_HSYNC_F	(2 << 2)
+#define LVDSTRIPE_ST_SWAP		(1 << 1)
+#define LVDSTRIPE_ST_ON			(1 << 0)
+
+#define LVDSCR				0x0018
+#define LVDSCR_DEPTH(n)			(((n) - 1) << 29)
+#define LVDSCR_BANDSET			(1 << 28)
+#define LVDSCR_TWGCNT(n)		((((n) - 256) / 16) << 24)
+#define LVDSCR_SDIV(n)			((n) << 22)
+#define LVDSCR_MODE			(1 << 21)
+#define LVDSCR_RSTN			(1 << 20)
+
+#define LVDDIV				0x001c
+#define LVDDIV_DIVSEL			(1 << 8)
+#define LVDDIV_DIVRESET			(1 << 7)
+#define LVDDIV_DIVSTP			(1 << 6)
+#define LVDDIV_DIV(n)			((n) << 0)
+
 #endif /* __RCAR_LVDS_REGS_H__ */