diff options
author | Shaik Sajida Bhanu <sbhanu@codeaurora.org> | 2021-07-13 12:36:11 +0530 |
---|---|---|
committer | Bjorn Andersson <bjorn.andersson@linaro.org> | 2021-07-20 08:58:12 -0500 |
commit | 298c81a7d44fe01b41d526ddabafcf8515c5f649 (patch) | |
tree | da2156b7d6fb025eae11d454a84bb9e21359e69e | |
parent | 12dd4ebda47abd5e3907da386b6fe1d8181ad179 (diff) | |
download | linux-298c81a7d44fe01b41d526ddabafcf8515c5f649.tar.bz2 |
arm64: dts: qcom: sc7280: Add nodes for eMMC and SD card
Add nodes for eMMC and SD card on sc7280.
Signed-off-by: Shaik Sajida Bhanu <sbhanu@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1626159971-22519-1-git-send-email-sbhanu@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
-rw-r--r-- | arch/arm64/boot/dts/qcom/sc7280-idp.dts | 71 | ||||
-rw-r--r-- | arch/arm64/boot/dts/qcom/sc7280.dtsi | 186 |
2 files changed, 257 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dts b/arch/arm64/boot/dts/qcom/sc7280-idp.dts index 3900cfc09562..1be822cef594 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dts +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dts @@ -7,6 +7,7 @@ /dts-v1/; +#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/iio/qcom,spmi-adc7-pmr735a.h> #include <dt-bindings/iio/qcom,spmi-adc7-pmr735b.h> #include <dt-bindings/iio/qcom,spmi-adc7-pm8350.h> @@ -272,6 +273,34 @@ status = "okay"; }; +&sdhc_1 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_on>; + pinctrl-1 = <&sdc1_off>; + + non-removable; + no-sd; + no-sdio; + + vmmc-supply = <&vreg_l7b_2p9>; + vqmmc-supply = <&vreg_l19b_1p8>; +}; + +&sdhc_2 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_on>; + pinctrl-1 = <&sdc2_off>; + + vmmc-supply = <&vreg_l9c_2p9>; + vqmmc-supply = <&vreg_l6c_2p9>; + + cd-gpios = <&tlmm 91 GPIO_ACTIVE_LOW>; +}; + &uart5 { status = "okay"; }; @@ -291,3 +320,45 @@ bias-pull-up; }; }; + +&sdc1_on { + clk { + bias-disable; + drive-strength = <16>; + }; + + cmd { + bias-pull-up; + drive-strength = <10>; + }; + + data { + bias-pull-up; + drive-strength = <10>; + }; + + rclk { + bias-pull-down; + }; +}; + +&sdc2_on { + clk { + bias-disable; + drive-strength = <16>; + }; + + cmd { + bias-pull-up; + drive-strength = <10>; + }; + + data { + bias-pull-up; + drive-strength = <10>; + }; + + sd-cd { + bias-pull-up; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi index a8c274ad74c4..da55adba1f8c 100644 --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi @@ -7,6 +7,7 @@ #include <dt-bindings/clock/qcom,gcc-sc7280.h> #include <dt-bindings/clock/qcom,rpmh.h> +#include <dt-bindings/interconnect/qcom,sc7280.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/mailbox/qcom-ipcc.h> #include <dt-bindings/power/qcom-aoss-qmp.h> @@ -24,6 +25,11 @@ chosen { }; + aliases { + mmc1 = &sdhc_1; + mmc2 = &sdhc_2; + }; + clocks { xo_board: xo-board { compatible = "fixed-clock"; @@ -436,6 +442,60 @@ #mbox-cells = <2>; }; + sdhc_1: sdhci@7c4000 { + compatible = "qcom,sc7280-sdhci", "qcom,sdhci-msm-v5"; + status = "disabled"; + + reg = <0 0x007c4000 0 0x1000>, + <0 0x007c5000 0 0x1000>; + reg-names = "hc", "cqhci"; + + iommus = <&apps_smmu 0xc0 0x0>; + interrupts = <GIC_SPI 652 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 656 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC1_APPS_CLK>, + <&gcc GCC_SDCC1_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "core", "iface", "xo"; + interconnects = <&aggre1_noc MASTER_SDCC_1 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_SDCC_1 0>; + interconnect-names = "sdhc-ddr","cpu-sdhc"; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&sdhc1_opp_table>; + + bus-width = <8>; + supports-cqe; + + qcom,dll-config = <0x0007642c>; + qcom,ddr-config = <0x80040868>; + + mmc-ddr-1_8v; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + + sdhc1_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <1800000 400000>; + opp-avg-kBps = <100000 0>; + }; + + opp-384000000 { + opp-hz = /bits/ 64 <384000000>; + required-opps = <&rpmhpd_opp_nom>; + opp-peak-kBps = <5400000 1600000>; + opp-avg-kBps = <390000 0>; + }; + }; + + }; + qupv3_id_0: geniqup@9c0000 { compatible = "qcom,geni-se-qup"; reg = <0 0x009c0000 0 0x2000>; @@ -1035,6 +1095,51 @@ }; }; + sdhc_2: sdhci@8804000 { + compatible = "qcom,sc7280-sdhci", "qcom,sdhci-msm-v5"; + status = "disabled"; + + reg = <0 0x08804000 0 0x1000>; + + iommus = <&apps_smmu 0x100 0x0>; + interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC2_APPS_CLK>, + <&gcc GCC_SDCC2_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "core", "iface", "xo"; + interconnects = <&aggre1_noc MASTER_SDCC_2 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_SDCC_2 0>; + interconnect-names = "sdhc-ddr","cpu-sdhc"; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&sdhc2_opp_table>; + + bus-width = <4>; + + qcom,dll-config = <0x0007642c>; + + sdhc2_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <1800000 400000>; + opp-avg-kBps = <100000 0>; + }; + + opp-202000000 { + opp-hz = /bits/ 64 <202000000>; + required-opps = <&rpmhpd_opp_nom>; + opp-peak-kBps = <5400000 1600000>; + opp-avg-kBps = <200000 0>; + }; + }; + + }; + dc_noc: interconnect@90e0000 { reg = <0 0x090e0000 0 0x5080>; compatible = "qcom,sc7280-dc-noc"; @@ -1185,6 +1290,87 @@ pins = "gpio46", "gpio47"; function = "qup13"; }; + + sdc1_on: sdc1-on { + clk { + pins = "sdc1_clk"; + }; + + cmd { + pins = "sdc1_cmd"; + }; + + data { + pins = "sdc1_data"; + }; + + rclk { + pins = "sdc1_rclk"; + }; + }; + + sdc1_off: sdc1-off { + clk { + pins = "sdc1_clk"; + drive-strength = <2>; + bias-bus-hold; + }; + + cmd { + pins = "sdc1_cmd"; + drive-strength = <2>; + bias-bus-hold; + }; + + data { + pins = "sdc1_data"; + drive-strength = <2>; + bias-bus-hold; + }; + + rclk { + pins = "sdc1_rclk"; + bias-bus-hold; + }; + }; + + sdc2_on: sdc2-on { + clk { + pins = "sdc2_clk"; + }; + + cmd { + pins = "sdc2_cmd"; + }; + + data { + pins = "sdc2_data"; + }; + + sd-cd { + pins = "gpio91"; + }; + }; + + sdc2_off: sdc2-off { + clk { + pins = "sdc2_clk"; + drive-strength = <2>; + bias-bus-hold; + }; + + cmd { + pins ="sdc2_cmd"; + drive-strength = <2>; + bias-bus-hold; + }; + + data { + pins ="sdc2_data"; + drive-strength = <2>; + bias-bus-hold; + }; + }; }; apps_smmu: iommu@15000000 { |