diff options
| author | Jiaxun Yang <jiaxun.yang@flygoat.com> | 2019-10-20 23:01:35 +0800 |
|---|---|---|
| committer | Paul Burton <paulburton@kernel.org> | 2019-11-01 14:31:28 -0700 |
| commit | 1bdb7b76705a38936e9875950587ea91c9ec0a98 (patch) | |
| tree | e1a0946643e6dcee33b9f64736bda0dd78b6ffb3 | |
| parent | 5831fdb099ddeec9849658cd534fdcbb03aa6ff9 (diff) | |
| download | linux-1bdb7b76705a38936e9875950587ea91c9ec0a98.tar.bz2 | |
MIPS: Loongson64: Cleanup unused code
Clean up legacy code after stripping out Loongson2ef code.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: paul.burton@mips.com
35 files changed, 34 insertions, 1543 deletions
diff --git a/arch/mips/include/asm/bootinfo.h b/arch/mips/include/asm/bootinfo.h index a9250f5c964f..d41a5057bc69 100644 --- a/arch/mips/include/asm/bootinfo.h +++ b/arch/mips/include/asm/bootinfo.h @@ -61,7 +61,7 @@ /* * Valid machtype for Loongson family */ -enum loongson_machine_type { +enum loongson2ef_machine_type { MACH_LOONGSON_UNKNOWN, MACH_LEMOTE_FL2E, MACH_LEMOTE_FL2F, @@ -70,7 +70,6 @@ enum loongson_machine_type { MACH_DEXXON_GDIUM2F10, MACH_LEMOTE_NAS, MACH_LEMOTE_LL2F, - MACH_LOONGSON_GENERIC, MACH_LOONGSON_END }; diff --git a/arch/mips/include/asm/mach-loongson64/cpu-feature-overrides.h b/arch/mips/include/asm/mach-loongson64/cpu-feature-overrides.h index 83ad90d8005d..895607eb81ca 100644 --- a/arch/mips/include/asm/mach-loongson64/cpu-feature-overrides.h +++ b/arch/mips/include/asm/mach-loongson64/cpu-feature-overrides.h @@ -44,10 +44,8 @@ #define cpu_has_vtag_icache 0 #define cpu_has_watch 1 -#ifdef CONFIG_CPU_LOONGSON64 #define cpu_has_wsbh 1 #define cpu_has_ic_fills_f_dc 1 #define cpu_hwrena_impl_bits 0xc0000000 -#endif #endif /* __ASM_MACH_LOONGSON64_CPU_FEATURE_OVERRIDES_H */ diff --git a/arch/mips/include/asm/mach-loongson64/cs5536/cs5536.h b/arch/mips/include/asm/mach-loongson64/cs5536/cs5536.h deleted file mode 100644 index 9795b3361532..000000000000 --- a/arch/mips/include/asm/mach-loongson64/cs5536/cs5536.h +++ /dev/null @@ -1,306 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * The header file of cs5536 south bridge. - * - * Copyright (C) 2007 Lemote, Inc. - * Author : jlliu <liujl@lemote.com> - */ - -#ifndef _CS5536_H -#define _CS5536_H - -#include <linux/types.h> - -extern void _rdmsr(u32 msr, u32 *hi, u32 *lo); -extern void _wrmsr(u32 msr, u32 hi, u32 lo); - -/* - * MSR module base - */ -#define CS5536_SB_MSR_BASE (0x00000000) -#define CS5536_GLIU_MSR_BASE (0x10000000) -#define CS5536_ILLEGAL_MSR_BASE (0x20000000) -#define CS5536_USB_MSR_BASE (0x40000000) -#define CS5536_IDE_MSR_BASE (0x60000000) -#define CS5536_DIVIL_MSR_BASE (0x80000000) -#define CS5536_ACC_MSR_BASE (0xa0000000) -#define CS5536_UNUSED_MSR_BASE (0xc0000000) -#define CS5536_GLCP_MSR_BASE (0xe0000000) - -#define SB_MSR_REG(offset) (CS5536_SB_MSR_BASE | (offset)) -#define GLIU_MSR_REG(offset) (CS5536_GLIU_MSR_BASE | (offset)) -#define ILLEGAL_MSR_REG(offset) (CS5536_ILLEGAL_MSR_BASE | (offset)) -#define USB_MSR_REG(offset) (CS5536_USB_MSR_BASE | (offset)) -#define IDE_MSR_REG(offset) (CS5536_IDE_MSR_BASE | (offset)) -#define DIVIL_MSR_REG(offset) (CS5536_DIVIL_MSR_BASE | (offset)) -#define ACC_MSR_REG(offset) (CS5536_ACC_MSR_BASE | (offset)) -#define UNUSED_MSR_REG(offset) (CS5536_UNUSED_MSR_BASE | (offset)) -#define GLCP_MSR_REG(offset) (CS5536_GLCP_MSR_BASE | (offset)) - -/* - * BAR SPACE OF VIRTUAL PCI : - * range for pci probe use, length is the actual size. - */ -/* IO space for all DIVIL modules */ -#define CS5536_IRQ_RANGE 0xffffffe0 /* USERD FOR PCI PROBE */ -#define CS5536_IRQ_LENGTH 0x20 /* THE REGS ACTUAL LENGTH */ -#define CS5536_SMB_RANGE 0xfffffff8 -#define CS5536_SMB_LENGTH 0x08 -#define CS5536_GPIO_RANGE 0xffffff00 -#define CS5536_GPIO_LENGTH 0x100 -#define CS5536_MFGPT_RANGE 0xffffffc0 -#define CS5536_MFGPT_LENGTH 0x40 -#define CS5536_ACPI_RANGE 0xffffffe0 -#define CS5536_ACPI_LENGTH 0x20 -#define CS5536_PMS_RANGE 0xffffff80 -#define CS5536_PMS_LENGTH 0x80 -/* IO space for IDE */ -#define CS5536_IDE_RANGE 0xfffffff0 -#define CS5536_IDE_LENGTH 0x10 -/* IO space for ACC */ -#define CS5536_ACC_RANGE 0xffffff80 -#define CS5536_ACC_LENGTH 0x80 -/* MEM space for ALL USB modules */ -#define CS5536_OHCI_RANGE 0xfffff000 -#define CS5536_OHCI_LENGTH 0x1000 -#define CS5536_EHCI_RANGE 0xfffff000 -#define CS5536_EHCI_LENGTH 0x1000 - -/* - * PCI MSR ACCESS - */ -#define PCI_MSR_CTRL 0xF0 -#define PCI_MSR_ADDR 0xF4 -#define PCI_MSR_DATA_LO 0xF8 -#define PCI_MSR_DATA_HI 0xFC - -/**************** MSR *****************************/ - -/* - * GLIU STANDARD MSR - */ -#define GLIU_CAP 0x00 -#define GLIU_CONFIG 0x01 -#define GLIU_SMI 0x02 -#define GLIU_ERROR 0x03 -#define GLIU_PM 0x04 -#define GLIU_DIAG 0x05 - -/* - * GLIU SPEC. MSR - */ -#define GLIU_P2D_BM0 0x20 -#define GLIU_P2D_BM1 0x21 -#define GLIU_P2D_BM2 0x22 -#define GLIU_P2D_BMK0 0x23 -#define GLIU_P2D_BMK1 0x24 -#define GLIU_P2D_BM3 0x25 -#define GLIU_P2D_BM4 0x26 -#define GLIU_COH 0x80 -#define GLIU_PAE 0x81 -#define GLIU_ARB 0x82 -#define GLIU_ASMI 0x83 -#define GLIU_AERR 0x84 -#define GLIU_DEBUG 0x85 -#define GLIU_PHY_CAP 0x86 -#define GLIU_NOUT_RESP 0x87 -#define GLIU_NOUT_WDATA 0x88 -#define GLIU_WHOAMI 0x8B -#define GLIU_SLV_DIS 0x8C -#define GLIU_IOD_BM0 0xE0 -#define GLIU_IOD_BM1 0xE1 -#define GLIU_IOD_BM2 0xE2 -#define GLIU_IOD_BM3 0xE3 -#define GLIU_IOD_BM4 0xE4 -#define GLIU_IOD_BM5 0xE5 -#define GLIU_IOD_BM6 0xE6 -#define GLIU_IOD_BM7 0xE7 -#define GLIU_IOD_BM8 0xE8 -#define GLIU_IOD_BM9 0xE9 -#define GLIU_IOD_SC0 0xEA -#define GLIU_IOD_SC1 0xEB -#define GLIU_IOD_SC2 0xEC -#define GLIU_IOD_SC3 0xED -#define GLIU_IOD_SC4 0xEE -#define GLIU_IOD_SC5 0xEF -#define GLIU_IOD_SC6 0xF0 -#define GLIU_IOD_SC7 0xF1 - -/* - * SB STANDARD - */ -#define SB_CAP 0x00 -#define SB_CONFIG 0x01 -#define SB_SMI 0x02 -#define SB_ERROR 0x03 -#define SB_MAR_ERR_EN 0x00000001 -#define SB_TAR_ERR_EN 0x00000002 -#define SB_RSVD_BIT1 0x00000004 -#define SB_EXCEP_ERR_EN 0x00000008 -#define SB_SYSE_ERR_EN 0x00000010 -#define SB_PARE_ERR_EN 0x00000020 -#define SB_TAS_ERR_EN 0x00000040 -#define SB_MAR_ERR_FLAG 0x00010000 -#define SB_TAR_ERR_FLAG 0x00020000 -#define SB_RSVD_BIT2 0x00040000 -#define SB_EXCEP_ERR_FLAG 0x00080000 -#define SB_SYSE_ERR_FLAG 0x00100000 -#define SB_PARE_ERR_FLAG 0x00200000 -#define SB_TAS_ERR_FLAG 0x00400000 -#define SB_PM 0x04 -#define SB_DIAG 0x05 - -/* - * SB SPEC. - */ -#define SB_CTRL 0x10 -#define SB_R0 0x20 -#define SB_R1 0x21 -#define SB_R2 0x22 -#define SB_R3 0x23 -#define SB_R4 0x24 -#define SB_R5 0x25 -#define SB_R6 0x26 -#define SB_R7 0x27 -#define SB_R8 0x28 -#define SB_R9 0x29 -#define SB_R10 0x2A -#define SB_R11 0x2B -#define SB_R12 0x2C -#define SB_R13 0x2D -#define SB_R14 0x2E -#define SB_R15 0x2F - -/* - * GLCP STANDARD - */ -#define GLCP_CAP 0x00 -#define GLCP_CONFIG 0x01 -#define GLCP_SMI 0x02 -#define GLCP_ERROR 0x03 -#define GLCP_PM 0x04 -#define GLCP_DIAG 0x05 - -/* - * GLCP SPEC. - */ -#define GLCP_CLK_DIS_DELAY 0x08 -#define GLCP_PM_CLK_DISABLE 0x09 -#define GLCP_GLB_PM 0x0B -#define GLCP_DBG_OUT 0x0C -#define GLCP_RSVD1 0x0D -#define GLCP_SOFT_COM 0x0E -#define SOFT_BAR_SMB_FLAG 0x00000001 -#define SOFT_BAR_GPIO_FLAG 0x00000002 -#define SOFT_BAR_MFGPT_FLAG 0x00000004 -#define SOFT_BAR_IRQ_FLAG 0x00000008 -#define SOFT_BAR_PMS_FLAG 0x00000010 -#define SOFT_BAR_ACPI_FLAG 0x00000020 -#define SOFT_BAR_IDE_FLAG 0x00000400 -#define SOFT_BAR_ACC_FLAG 0x00000800 -#define SOFT_BAR_OHCI_FLAG 0x00001000 -#define SOFT_BAR_EHCI_FLAG 0x00002000 -#define GLCP_RSVD2 0x0F -#define GLCP_CLK_OFF 0x10 -#define GLCP_CLK_ACTIVE 0x11 -#define GLCP_CLK_DISABLE 0x12 -#define GLCP_CLK4ACK 0x13 -#define GLCP_SYS_RST 0x14 -#define GLCP_RSVD3 0x15 -#define GLCP_DBG_CLK_CTRL 0x16 -#define GLCP_CHIP_REV_ID 0x17 - -/* PIC */ -#define PIC_YSEL_LOW 0x20 -#define PIC_YSEL_LOW_USB_SHIFT 8 -#define PIC_YSEL_LOW_ACC_SHIFT 16 -#define PIC_YSEL_LOW_FLASH_SHIFT 24 -#define PIC_YSEL_HIGH 0x21 -#define PIC_ZSEL_LOW 0x22 -#define PIC_ZSEL_HIGH 0x23 -#define PIC_IRQM_PRIM 0x24 -#define PIC_IRQM_LPC 0x25 -#define PIC_XIRR_STS_LOW 0x26 -#define PIC_XIRR_STS_HIGH 0x27 -#define PCI_SHDW 0x34 - -/* - * DIVIL STANDARD - */ -#define DIVIL_CAP 0x00 -#define DIVIL_CONFIG 0x01 -#define DIVIL_SMI 0x02 -#define DIVIL_ERROR 0x03 -#define DIVIL_PM 0x04 -#define DIVIL_DIAG 0x05 - -/* - * DIVIL SPEC. - */ -#define DIVIL_LBAR_IRQ 0x08 -#define DIVIL_LBAR_KEL 0x09 -#define DIVIL_LBAR_SMB 0x0B -#define DIVIL_LBAR_GPIO 0x0C -#define DIVIL_LBAR_MFGPT 0x0D -#define DIVIL_LBAR_ACPI 0x0E -#define DIVIL_LBAR_PMS 0x0F -#define DIVIL_LEG_IO 0x14 -#define DIVIL_BALL_OPTS 0x15 -#define DIVIL_SOFT_IRQ 0x16 -#define DIVIL_SOFT_RESET 0x17 - -/* MFGPT */ -#define MFGPT_IRQ 0x28 - -/* - * IDE STANDARD - */ -#define IDE_CAP 0x00 -#define IDE_CONFIG 0x01 -#define IDE_SMI 0x02 -#define IDE_ERROR 0x03 -#define IDE_PM 0x04 -#define IDE_DIAG 0x05 - -/* - * IDE SPEC. - */ -#define IDE_IO_BAR 0x08 -#define IDE_CFG 0x10 -#define IDE_DTC 0x12 -#define IDE_CAST 0x13 -#define IDE_ETC 0x14 -#define IDE_INTERNAL_PM 0x15 - -/* - * ACC STANDARD - */ -#define ACC_CAP 0x00 -#define ACC_CONFIG 0x01 -#define ACC_SMI 0x02 -#define ACC_ERROR 0x03 -#define ACC_PM 0x04 -#define ACC_DIAG 0x05 - -/* - * USB STANDARD - */ -#define USB_CAP 0x00 -#define USB_CONFIG 0x01 -#define USB_SMI 0x02 -#define USB_ERROR 0x03 -#define USB_PM 0x04 -#define USB_DIAG 0x05 - -/* - * USB SPEC. - */ -#define USB_OHCI 0x08 -#define USB_EHCI 0x09 - -/****************** NATIVE ***************************/ -/* GPIO : I/O SPACE; REG : 32BITS */ -#define GPIOL_OUT_VAL 0x00 -#define GPIOL_OUT_EN 0x04 - -#endif /* _CS5536_H */ diff --git a/arch/mips/include/asm/mach-loongson64/cs5536/cs5536_mfgpt.h b/arch/mips/include/asm/mach-loongson64/cs5536/cs5536_mfgpt.h deleted file mode 100644 index 52e8bb0fc04d..000000000000 --- a/arch/mips/include/asm/mach-loongson64/cs5536/cs5536_mfgpt.h +++ /dev/null @@ -1,36 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * cs5536 mfgpt header file - */ - -#ifndef _CS5536_MFGPT_H -#define _CS5536_MFGPT_H - -#include <cs5536/cs5536.h> -#include <cs5536/cs5536_pci.h> - -#ifdef CONFIG_CS5536_MFGPT -extern void setup_mfgpt0_timer(void); -extern void disable_mfgpt0_counter(void); -extern void enable_mfgpt0_counter(void); -#else -static inline void __maybe_unused setup_mfgpt0_timer(void) -{ -} -static inline void __maybe_unused disable_mfgpt0_counter(void) -{ -} -static inline void __maybe_unused enable_mfgpt0_counter(void) -{ -} -#endif - -#define MFGPT_TICK_RATE 14318000 -#define COMPARE ((MFGPT_TICK_RATE + HZ/2) / HZ) - -#define MFGPT_BASE mfgpt_base -#define MFGPT0_CMP2 (MFGPT_BASE + 2) -#define MFGPT0_CNT (MFGPT_BASE + 4) -#define MFGPT0_SETUP (MFGPT_BASE + 6) - -#endif /*!_CS5536_MFGPT_H */ diff --git a/arch/mips/include/asm/mach-loongson64/cs5536/cs5536_pci.h b/arch/mips/include/asm/mach-loongson64/cs5536/cs5536_pci.h deleted file mode 100644 index a0d4b752899e..000000000000 --- a/arch/mips/include/asm/mach-loongson64/cs5536/cs5536_pci.h +++ /dev/null @@ -1,153 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * the definition file of cs5536 Virtual Support Module(VSM). - * pci configuration space can be accessed through the VSM, so - * there is no need of the MSR read/write now, except the spec. - * MSR registers which are not implemented yet. - * - * Copyright (C) 2007 Lemote Inc. - * Author : jlliu, liujl@lemote.com - */ - -#ifndef _CS5536_PCI_H -#define _CS5536_PCI_H - -#include <linux/types.h> -#include <linux/pci_regs.h> - -extern void cs5536_pci_conf_write4(int function, int reg, u32 value); -extern u32 cs5536_pci_conf_read4(int function, int reg); - -#define CS5536_ACC_INTR 9 -#define CS5536_IDE_INTR 14 -#define CS5536_USB_INTR 11 -#define CS5536_MFGPT_INTR 5 -#define CS5536_UART1_INTR 4 -#define CS5536_UART2_INTR 3 - -/************** PCI BUS DEVICE FUNCTION ***************/ - -/* - * PCI bus device function - */ -#define PCI_BUS_CS5536 0 -#define PCI_IDSEL_CS5536 14 - -/********** STANDARD PCI-2.2 EXPANSION ****************/ - -/* - * PCI configuration space - * we have to virtualize the PCI configure space head, so we should - * define the necessary IDs and some others. - */ - -/* CONFIG of PCI VENDOR ID*/ -#define CFG_PCI_VENDOR_ID(mod_dev_id, sys_vendor_id) \ - (((mod_dev_id) << 16) | (sys_vendor_id)) - -/* VENDOR ID */ -#define CS5536_VENDOR_ID 0x1022 - -/* DEVICE ID */ -#define CS5536_ISA_DEVICE_ID 0x2090 -#define CS5536_IDE_DEVICE_ID 0x209a -#define CS5536_ACC_DEVICE_ID 0x2093 -#define CS5536_OHCI_DEVICE_ID 0x2094 -#define CS5536_EHCI_DEVICE_ID 0x2095 - -/* CLASS CODE : CLASS SUB-CLASS INTERFACE */ -#define CS5536_ISA_CLASS_CODE 0x060100 -#define CS5536_IDE_CLASS_CODE 0x010180 -#define CS5536_ACC_CLASS_CODE 0x040100 -#define CS5536_OHCI_CLASS_CODE 0x0C0310 -#define CS5536_EHCI_CLASS_CODE 0x0C0320 - -/* BHLC : BIST HEADER-TYPE LATENCY-TIMER CACHE-LINE-SIZE */ - -#define CFG_PCI_CACHE_LINE_SIZE(header_type, latency_timer) \ - ((PCI_NONE_BIST << 24) | ((header_type) << 16) \ - | ((latency_timer) << 8) | PCI_NORMAL_CACHE_LINE_SIZE); - -#define PCI_NONE_BIST 0x00 /* RO not implemented yet. */ -#define PCI_BRIDGE_HEADER_TYPE 0x80 /* RO */ -#define PCI_NORMAL_HEADER_TYPE 0x00 -#define PCI_NORMAL_LATENCY_TIMER 0x00 -#define PCI_NORMAL_CACHE_LINE_SIZE 0x08 /* RW */ - -/* BAR */ -#define PCI_BAR0_REG 0x10 -#define PCI_BAR1_REG 0x14 -#define PCI_BAR2_REG 0x18 -#define PCI_BAR3_REG 0x1c -#define PCI_BAR4_REG 0x20 -#define PCI_BAR5_REG 0x24 -#define PCI_BAR_RANGE_MASK 0xFFFFFFFF - -/* CARDBUS CIS POINTER */ -#define PCI_CARDBUS_CIS_POINTER 0x00000000 - -/* SUBSYSTEM VENDOR ID */ -#define CS5536_SUB_VENDOR_ID CS5536_VENDOR_ID - -/* SUBSYSTEM ID */ -#define CS5536_ISA_SUB_ID CS5536_ISA_DEVICE_ID -#define CS5536_IDE_SUB_ID CS5536_IDE_DEVICE_ID -#define CS5536_ACC_SUB_ID CS5536_ACC_DEVICE_ID -#define CS5536_OHCI_SUB_ID CS5536_OHCI_DEVICE_ID -#define CS5536_EHCI_SUB_ID CS5536_EHCI_DEVICE_ID - -/* EXPANSION ROM BAR */ -#define PCI_EXPANSION_ROM_BAR 0x00000000 - -/* CAPABILITIES POINTER */ -#define PCI_CAPLIST_POINTER 0x00000000 -#define PCI_CAPLIST_USB_POINTER 0x40 -/* INTERRUPT */ - -#define CFG_PCI_INTERRUPT_LINE(pin, mod_intr) \ - ((PCI_MAX_LATENCY << 24) | (PCI_MIN_GRANT << 16) | \ - ((pin) << 8) | (mod_intr)) - -#define PCI_MAX_LATENCY 0x40 -#define PCI_MIN_GRANT 0x00 -#define PCI_DEFAULT_PIN 0x01 - -/*********** EXPANSION PCI REG ************************/ - -/* - * ISA EXPANSION - */ -#define PCI_UART1_INT_REG 0x50 -#define PCI_UART2_INT_REG 0x54 -#define PCI_ISA_FIXUP_REG 0x58 - -/* - * IDE EXPANSION - */ -#define PCI_IDE_CFG_REG 0x40 -#define CS5536_IDE_FLASH_SIGNATURE 0xDEADBEEF -#define PCI_IDE_DTC_REG 0x48 -#define PCI_IDE_CAST_REG 0x4C -#define PCI_IDE_ETC_REG 0x50 -#define PCI_IDE_PM_REG 0x54 -#define PCI_IDE_INT_REG 0x60 - -/* - * ACC EXPANSION - */ -#define PCI_ACC_INT_REG 0x50 - -/* - * OHCI EXPANSION : INTTERUPT IS IMPLEMENTED BY THE OHCI - */ -#define PCI_OHCI_PM_REG 0x40 -#define PCI_OHCI_INT_REG 0x50 - -/* - * EHCI EXPANSION - */ -#define PCI_EHCI_LEGSMIEN_REG 0x50 -#define PCI_EHCI_LEGSMISTS_REG 0x54 -#define PCI_EHCI_FLADJ_REG 0x60 - -#endif /* _CS5536_PCI_H_ */ diff --git a/arch/mips/include/asm/mach-loongson64/cs5536/cs5536_vsm.h b/arch/mips/include/asm/mach-loongson64/cs5536/cs5536_vsm.h deleted file mode 100644 index 70d0153cccc3..000000000000 --- a/arch/mips/include/asm/mach-loongson64/cs5536/cs5536_vsm.h +++ /dev/null @@ -1,32 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * the read/write interfaces for Virtual Support Module(VSM) - * - * Copyright (C) 2009 Lemote, Inc. - * Author: Wu Zhangjin <wuzhangjin@gmail.com> - */ - -#ifndef _CS5536_VSM_H -#define _CS5536_VSM_H - -#include <linux/types.h> - -typedef void (*cs5536_pci_vsm_write)(int reg, u32 value); -typedef u32 (*cs5536_pci_vsm_read)(int reg); - -#define DECLARE_CS5536_MODULE(name) \ -extern void pci_##name##_write_reg(int reg, u32 value); \ -extern u32 pci_##name##_read_reg(int reg); - -/* ide module */ -DECLARE_CS5536_MODULE(ide) -/* acc module */ -DECLARE_CS5536_MODULE(acc) -/* ohci module */ -DECLARE_CS5536_MODULE(ohci) -/* isa module */ -DECLARE_CS5536_MODULE(isa) -/* ehci module */ -DECLARE_CS5536_MODULE(ehci) - -#endif /* _CS5536_VSM_H */ diff --git a/arch/mips/include/asm/mach-loongson64/irq.h b/arch/mips/include/asm/mach-loongson64/irq.h index 557e069c400c..73a89913dc38 100644 --- a/arch/mips/include/asm/mach-loongson64/irq.h +++ b/arch/mips/include/asm/mach-loongson64/irq.h @@ -4,8 +4,6 @@ #include <boot_param.h> -#ifdef CONFIG_CPU_LOONGSON64 - /* cpu core interrupt numbers */ #define MIPS_CPU_IRQ_BASE 56 @@ -35,8 +33,6 @@ #define LOONGSON_INT_COREx_INTy(x, y) (1<<(x) | 1<<(y+4)) /* route to int y of core x */ -#endif - extern void fixup_irqs(void); extern void loongson3_ipi_interrupt(struct pt_regs *regs); diff --git a/arch/mips/include/asm/mach-loongson64/kernel-entry-init.h b/arch/mips/include/asm/mach-loongson64/kernel-entry-init.h index 28ccb06c8289..87a5bfbf8cfe 100644 --- a/arch/mips/include/asm/mach-loongson64/kernel-entry-init.h +++ b/arch/mips/include/asm/mach-loongson64/kernel-entry-init.h @@ -17,7 +17,6 @@ * Override macros used in arch/mips/kernel/head.S. */ .macro kernel_entry_setup -#ifdef CONFIG_CPU_LOONGSON64 .set push .set mips64 /* Set LPA on LOONGSON3 config3 */ @@ -47,14 +46,12 @@ 2: _ehb .set pop -#endif .endm /* * Do SMP slave processor setup. */ .macro smp_slave_setup -#ifdef CONFIG_CPU_LOONGSON64 .set push .set mips64 /* Set LPA on LOONGSON3 config3 */ @@ -84,7 +81,6 @@ 2: _ehb .set pop -#endif .endm #endif /* __ASM_MACH_LOONGSON64_KERNEL_ENTRY_H */ diff --git a/arch/mips/include/asm/mach-loongson64/loongson.h b/arch/mips/include/asm/mach-loongson64/loongson.h index 40a24b76b874..bc00c2d88225 100644 --- a/arch/mips/include/asm/mach-loongson64/loongson.h +++ b/arch/mips/include/asm/mach-loongson64/loongson.h @@ -12,8 +12,6 @@ #include <linux/irq.h> #include <boot_param.h> -/* loongson internal northbridge initialization */ -extern void bonito_irq_init(void); /* machine-specific reboot/halt operation */ extern void mach_prepare_reboot(void); @@ -27,24 +25,9 @@ extern const struct plat_smp_ops loongson3_smp_ops; /* loongson-specific command line, env and memory initialization */ extern void __init prom_init_memory(void); extern void __init prom_init_cmdline(void); -extern void __init prom_init_machtype(void); extern void __init prom_init_env(void); -#ifdef CONFIG_LOONGSON_UART_BASE -extern unsigned long _loongson_uart_base[], loongson_uart_base[]; -extern void prom_init_loongson_uart_base(void); -#endif - -static inline void prom_init_uart_base(void) -{ -#ifdef CONFIG_LOONGSON_UART_BASE - prom_init_loongson_uart_base(); -#endif -} /* irq operation functions */ -extern void bonito_irqdispatch(void); -extern void __init bonito_irq_init(void); -extern void __init mach_init_irq(void); extern void mach_irq_dispatch(unsigned int pending); extern int mach_i8259_irq(void); @@ -64,17 +47,6 @@ extern int mach_i8259_irq(void); #define LOONGSON3_REG32(base, x) \ (*(volatile u32 *)((char *)TO_UNCAC(base) + (x))) -#define LOONGSON_IRQ_BASE 32 -#define LOONGSON2_PERFCNT_IRQ (MIPS_CPU_IRQ_BASE + 6) /* cpu perf counter */ - -#include <linux/interrupt.h> -static inline void do_perfcnt_IRQ(void) -{ -#if IS_ENABLED(CONFIG_OPROFILE) - do_IRQ(LOONGSON2_PERFCNT_IRQ); -#endif -} - #define LOONGSON_FLASH_BASE 0x1c000000 #define LOONGSON_FLASH_SIZE 0x02000000 /* 32M */ #define LOONGSON_FLASH_TOP (LOONGSON_FLASH_BASE+LOONGSON_FLASH_SIZE-1) @@ -109,11 +81,7 @@ static inline void do_perfcnt_IRQ(void) #define LOONGSON_PCICFG_SIZE 0x00000800 /* 2K */ #define LOONGSON_PCICFG_TOP (LOONGSON_PCICFG_BASE+LOONGSON_PCICFG_SIZE-1) -#ifdef CONFIG_CPU_LOONGSON64 #define LOONGSON_PCIIO_BASE loongson_sysconf.pci_io_base -#else -#define LOONGSON_PCIIO_BASE 0x1fd00000 -#endif #define LOONGSON_PCIIO_SIZE 0x00100000 /* 1M */ #define LOONGSON_PCIIO_TOP (LOONGSON_PCIIO_BASE+LOONGSON_PCIIO_SIZE-1) @@ -270,86 +238,4 @@ extern u64 loongson_freqctrl[MAX_PACKAGES]; #define LOONGSON_PCIMAP_WIN(WIN, ADDR) \ ((((ADDR)>>26) & LOONGSON_PCIMAP_PCIMAP_LO0) << ((WIN)*6)) -#ifdef CONFIG_CPU_SUPPORTS_CPUFREQ -#include <linux/cpufreq.h> -extern struct cpufreq_frequency_table loongson2_clockmod_table[]; -#endif - -/* - * address windows configuration module - * - * loongson2e do not have this module - */ -#ifdef CONFIG_CPU_SUPPORTS_ADDRWINCFG - -/* address window config module base address */ -#define LOONGSON_ADDRWINCFG_BASE 0x3ff00000ul -#define LOONGSON_ADDRWINCFG_SIZE 0x180 - -extern unsigned long _loongson_addrwincfg_base; -#define LOONGSON_ADDRWINCFG(offset) \ - (*(volatile u64 *)(_loongson_addrwincfg_base + (offset))) - -#define CPU_WIN0_BASE LOONGSON_ADDRWINCFG(0x00) -#define CPU_WIN1_BASE LOONGSON_ADDRWINCFG(0x08) -#define CPU_WIN2_BASE LOONGSON_ADDRWINCFG(0x10) -#define CPU_WIN3_BASE LOONGSON_ADDRWINCFG(0x18) - -#define CPU_WIN0_MASK LOONGSON_ADDRWINCFG(0x20) -#define CPU_WIN1_MASK LOONGSON_ADDRWINCFG(0x28) -#define CPU_WIN2_MASK LOONGSON_ADDRWINCFG(0x30) -#define CPU_WIN3_MASK LOONGSON_ADDRWINCFG(0x38) - -#define CPU_WIN0_MMAP LOONGSON_ADDRWINCFG(0x40) -#define CPU_WIN1_MMAP LOONGSON_ADDRWINCFG(0x48) -#define CPU_WIN2_MMAP LOONGSON_ADDRWINCFG(0x50) -#define CPU_WIN3_MMAP LOONGSON_ADDRWINCFG(0x58) - -#define PCIDMA_WIN0_BASE LOONGSON_ADDRWINCFG(0x60) -#define PCIDMA_WIN1_BASE LOONGSON_ADDRWINCFG(0x68) -#define PCIDMA_WIN2_BASE LOONGSON_ADDRWINCFG(0x70) -#define PCIDMA_WIN3_BASE LOONGSON_ADDRWINCFG(0x78) - -#define PCIDMA_WIN0_MASK LOONGSON_ADDRWINCFG(0x80) -#define PCIDMA_WIN1_MASK LOONGSON_ADDRWINCFG(0x88) -#define PCIDMA_WIN2_MASK LOONGSON_ADDRWINCFG(0x90) -#define PCIDMA_WIN3_MASK LOONGSON_ADDRWINCFG(0x98) - -#define PCIDMA_WIN0_MMAP LOONGSON_ADDRWINCFG(0xa0) -#define PCIDMA_WIN1_MMAP LOONGSON_ADDRWINCFG(0xa8) -#define PCIDMA_WIN2_MMAP LOONGSON_ADDRWINCFG(0xb0) -#define PCIDMA_WIN3_MMAP LOONGSON_ADDRWINCFG(0xb8) - -#define ADDRWIN_WIN0 0 -#define ADDRWIN_WIN1 1 -#define ADDRWIN_WIN2 2 -#define ADDRWIN_WIN3 3 - -#define ADDRWIN_MAP_DST_DDR 0 -#define ADDRWIN_MAP_DST_PCI 1 -#define ADDRWIN_MAP_DST_LIO 1 - -/* - * s: CPU, PCIDMA - * d: DDR, PCI, LIO - * win: 0, 1, 2, 3 - * src: map source - * dst: map destination - * size: ~mask + 1 - */ -#define LOONGSON_ADDRWIN_CFG(s, d, w, src, dst, size) do {\ - s##_WIN##w##_BASE = (src); \ - s##_WIN##w##_MMAP = (dst) | ADDRWIN_MAP_DST_##d; \ - s##_WIN##w##_MASK = ~(size-1); \ -} while (0) - -#define LOONGSON_ADDRWIN_CPUTOPCI(win, src, dst, size) \ - LOONGSON_ADDRWIN_CFG(CPU, PCI, win, src, dst, size) -#define LOONGSON_ADDRWIN_CPUTODDR(win, src, dst, size) \ - LOONGSON_ADDRWIN_CFG(CPU, DDR, win, src, dst, size) -#define LOONGSON_ADDRWIN_PCITODDR(win, src, dst, size) \ - LOONGSON_ADDRWIN_CFG(PCIDMA, DDR, win, src, dst, size) - -#endif /* ! CONFIG_CPU_SUPPORTS_ADDRWINCFG */ - #endif /* __ASM_MACH_LOONGSON64_LOONGSON_H */ diff --git a/arch/mips/include/asm/mach-loongson64/machine.h b/arch/mips/include/asm/mach-loongson64/machine.h deleted file mode 100644 index 8ef7ea94a26d..000000000000 --- a/arch/mips/include/asm/mach-loongson64/machine.h +++ /dev/null @@ -1,29 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * Copyright (C) 2009 Lemote, Inc. - * Author: Wu Zhangjin <wuzhangjin@gmail.com> - */ - -#ifndef __ASM_MACH_LOONGSON64_MACHINE_H -#define __ASM_MACH_LOONGSON64_MACHINE_H - -#ifdef CONFIG_LEMOTE_FULOONG2E - -#define LOONGSON_MACHTYPE MACH_LEMOTE_FL2E - -#endif - -/* use fuloong2f as the default machine of LEMOTE_MACH2F */ -#ifdef CONFIG_LEMOTE_MACH2F - -#define LOONGSON_MACHTYPE MACH_LEMOTE_FL2F - -#endif - -#ifdef CONFIG_LOONGSON_MACH3X - -#define LOONGSON_MACHTYPE MACH_LOONGSON_GENERIC - -#endif /* CONFIG_LOONGSON_MACH3X */ - -#endif /* __ASM_MACH_LOONGSON64_MACHINE_H */ diff --git a/arch/mips/include/asm/mach-loongson64/mem.h b/arch/mips/include/asm/mach-loongson64/mem.h deleted file mode 100644 index ce33c174c04d..000000000000 --- a/arch/mips/include/asm/mach-loongson64/mem.h +++ /dev/null @@ -1,37 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * Copyright (C) 2009 Lemote, Inc. - * Author: Wu Zhangjin <wuzhangjin@gmail.com> - */ - -#ifndef __ASM_MACH_LOONGSON64_MEM_H -#define __ASM_MACH_LOONGSON64_MEM_H - -/* - * high memory space - * - * in loongson2e, starts from 512M - * in loongson2f, starts from 2G 256M - */ -#ifdef CONFIG_CPU_LOONGSON2E -#define LOONGSON_HIGHMEM_START 0x20000000 -#else -#define LOONGSON_HIGHMEM_START 0x90000000 -#endif - -/* - * the peripheral registers(MMIO): - * - * On the Lemote Loongson 2e system, reside between 0x1000:0000 and 0x2000:0000. - * On the Lemote Loongson 2f system, reside between 0x1000:0000 and 0x8000:0000. - */ - -#define LOONGSON_MMIO_MEM_START 0x10000000 - -#ifdef CONFIG_CPU_LOONGSON2E -#define LOONGSON_MMIO_MEM_END 0x20000000 -#else -#define LOONGSON_MMIO_MEM_END 0x80000000 -#endif - -#endif /* __ASM_MACH_LOONGSON64_MEM_H */ diff --git a/arch/mips/include/asm/mach-loongson64/mmzone.h b/arch/mips/include/asm/mach-loongson64/mmzone.h index 62073d60739f..3a25dbd3b3e9 100644 --- a/arch/mips/include/asm/mach-loongson64/mmzone.h +++ b/arch/mips/include/asm/mach-loongson64/mmzone.h @@ -6,8 +6,8 @@ * Huacai Chen, chenhc@lemote.com * Xiaofu Meng, Shuangshuang Zhang */ -#ifndef _ASM_MACH_MMZONE_H -#define _ASM_MACH_MMZONE_H +#ifndef _ASM_MACH_LOONGSON64_MMZONE_H +#define _ASM_MACH_LOONGSON64_MMZONE_H #include <boot_param.h> #define NODE_ADDRSPACE_SHIFT 44 @@ -19,30 +19,9 @@ #define pa_to_nid(addr) (((addr) & 0xf00000000000) >> NODE_ADDRSPACE_SHIFT) #define nid_to_addrbase(nid) ((nid) << NODE_ADDRSPACE_SHIFT) -#define LEVELS_PER_SLICE 128 +extern struct pglist_data *__node_data[]; -struct slice_data { - unsigned long irq_enable_mask[2]; - int level_to_irq[LEVELS_PER_SLICE]; -}; - -struct hub_data { - cpumask_t h_cpus; - unsigned long slice_map; - unsigned long irq_alloc_mask[2]; - struct slice_data slice[2]; -}; - -struct node_data { - struct pglist_data pglist; - struct hub_data hub; - cpumask_t cpumask; -}; - -extern struct node_data *__node_data[]; - -#define NODE_DATA(n) (&__node_data[(n)]->pglist) -#define hub_data(n) (&__node_data[(n)]->hub) +#define NODE_DATA(n) (__node_data[n]) extern void setup_zero_pages(void); extern void __init prom_init_numa_memory(void); diff --git a/arch/mips/include/asm/mach-loongson64/pci.h b/arch/mips/include/asm/mach-loongson64/pci.h index 05cc9052772f..8b59d64a23e8 100644 --- a/arch/mips/include/asm/mach-loongson64/pci.h +++ b/arch/mips/include/asm/mach-loongson64/pci.h @@ -12,39 +12,8 @@ extern struct pci_ops loongson_pci_ops; /* this is an offset from mips_io_port_base */ #define LOONGSON_PCI_IO_START 0x00004000UL -#ifdef CONFIG_CPU_SUPPORTS_ADDRWINCFG - -/* - * we use address window2 to map cpu address space to pci space - * window2: cpu [1G, 2G] -> pci [1G, 2G] - * why not use window 0 & 1? because they are used by cpu when booting. - * window0: cpu [0, 256M] -> ddr [0, 256M] - * window1: cpu [256M, 512M] -> pci [256M, 512M] - */ - -/* the smallest LOONGSON_CPU_MEM_SRC can be 512M */ -#define LOONGSON_CPU_MEM_SRC 0x40000000ul /* 1G */ -#define LOONGSON_PCI_MEM_DST LOONGSON_CPU_MEM_SRC - -#define LOONGSON_PCI_MEM_START LOONGSON_PCI_MEM_DST -#define LOONGSON_PCI_MEM_END (0x80000000ul-1) /* 2G */ - -#define MMAP_CPUTOPCI_SIZE (LOONGSON_PCI_MEM_END - \ - LOONGSON_PCI_MEM_START + 1) - -#else /* loongson2f/32bit & loongson2e */ - -/* this pci memory space is mapped by pcimap in pci.c */ -#ifdef CONFIG_CPU_LOONGSON64 #define LOONGSON_PCI_MEM_START 0x40000000UL #define LOONGSON_PCI_MEM_END 0x7effffffUL -#else -#define LOONGSON_PCI_MEM_START LOONGSON_PCILO1_BASE -#define LOONGSON_PCI_MEM_END (LOONGSON_PCILO1_BASE + 0x04000000 * 2) -#endif -/* this is an offset from mips_io_port_base */ -#define LOONGSON_PCI_IO_START 0x00004000UL -#endif /* !CONFIG_CPU_SUPPORTS_ADDRWINCFG */ #endif /* !__ASM_MACH_LOONGSON64_PCI_H_ */ diff --git a/arch/mips/include/asm/mach-loongson64/topology.h b/arch/mips/include/asm/mach-loongson64/topology.h index 7ff819ab308a..3414a1fd1783 100644 --- a/arch/mips/include/asm/mach-loongson64/topology.h +++ b/arch/mips/include/asm/mach-loongson64/topology.h @@ -5,7 +5,9 @@ #ifdef CONFIG_NUMA #define cpu_to_node(cpu) (cpu_logical_map(cpu) >> 2) -#define cpumask_of_node(node) (&__node_data[(node)]->cpumask) + +extern cpumask_t __node_cpumask[]; +#define cpumask_of_node(node) (&__node_cpumask[node]) struct pci_bus; extern int pcibus_to_node(struct pci_bus *); diff --git a/arch/mips/loongson64/Kconfig b/arch/mips/loongson64/Kconfig index 0e99a5af6e90..3215b768bb88 100644 --- a/arch/mips/loongson64/Kconfig +++ b/arch/mips/loongson64/Kconfig @@ -20,6 +20,7 @@ config LOONGSON_MACH3X select I8259 select IRQ_MIPS_CPU select NR_CPUS_DEFAULT_4 + select USE_GENERIC_EARLY_PRINTK_8250 select SYS_HAS_CPU_LOONGSON64 select SYS_HAS_EARLY_PRINTK select SYS_SUPPORTS_SMP @@ -30,7 +31,7 @@ config LOONGSON_MACH3X select SYS_SUPPORTS_LITTLE_ENDIAN select LOONGSON_MC146818 select ZONE_DMA32 - select LEFI_FIRMWARE_INTERFACE + select NUMA help Generic Loongson 3 family machines utilize the 3A/3B revision of Loongson processor and RS780/SBX00 chipset. @@ -48,16 +49,9 @@ config RS780_HPET If unsure, say Yes. -config LOONGSON_UART_BASE - bool - default y - depends on EARLY_PRINTK || SERIAL_8250 config LOONGSON_MC146818 bool default n -config LEFI_FIRMWARE_INTERFACE - bool - endif # MACH_LOONGSON64 diff --git a/arch/mips/loongson64/Platform b/arch/mips/loongson64/Platform index 31167e568e46..a1efea6ce6bb 100644 --- a/arch/mips/loongson64/Platform +++ b/arch/mips/loongson64/Platform @@ -53,4 +53,4 @@ endif platform-$(CONFIG_MACH_LOONGSON64) += loongson64/ cflags-$(CONFIG_MACH_LOONGSON64) += -I$(srctree)/arch/mips/include/asm/mach-loongson64 -mno-branch-likely -load-$(CONFIG_LOONGSON_MACH3X) += 0xffffffff80200000 +load-$(CONFIG_CPU_LOONGSON64) += 0xffffffff80200000 diff --git a/arch/mips/loongson64/common/Makefile b/arch/mips/loongson64/common/Makefile index 85438df80950..c476401c9b13 100644 --- a/arch/mips/loongson64/common/Makefile +++ b/arch/mips/loongson64/common/Makefile @@ -3,15 +3,10 @@ # Makefile for loongson based machines. # -obj-y += setup.o init.o cmdline.o env.o time.o reset.o irq.o \ - bonito-irq.o mem.o machtype.o platform.o serial.o +obj-y += setup.o init.o cmdline.o env.o time.o reset.o + obj-$(CONFIG_PCI) += pci.o -# -# Serial port support -# -obj-$(CONFIG_EARLY_PRINTK) += early_printk.o -obj-$(CONFIG_LOONGSON_UART_BASE) += uart_base.o obj-$(CONFIG_LOONGSON_MC146818) += rtc.o # diff --git a/arch/mips/loongson64/common/bonito-irq.c b/arch/mips/loongson64/common/bonito-irq.c deleted file mode 100644 index 82352cc25e4c..000000000000 --- a/arch/mips/loongson64/common/bonito-irq.c +++ /dev/null @@ -1,49 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Copyright 2001 MontaVista Software Inc. - * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net - * Copyright (C) 2000, 2001 Ralf Baechle (ralf@gnu.org) - * - * Copyright (C) 2007 Lemote Inc. & Institute of Computing Technology - * Author: Fuxin Zhang, zhangfx@lemote.com - */ -#include <linux/interrupt.h> -#include <linux/compiler.h> - -#include <loongson.h> - -static inline void bonito_irq_enable(struct irq_data *d) -{ - LOONGSON_INTENSET = (1 << (d->irq - LOONGSON_IRQ_BASE)); - mmiowb(); -} - -static inline void bonito_irq_disable(struct irq_data *d) -{ - LOONGSON_INTENCLR = (1 << (d->irq - LOONGSON_IRQ_BASE)); - mmiowb(); -} - -static struct irq_chip bonito_irq_type = { - .name = "bonito_irq", - .irq_mask = bonito_irq_disable, - .irq_unmask = bonito_irq_enable, -}; - -static struct irqaction __maybe_unused dma_timeout_irqaction = { - .handler = no_action, - .name = "dma_timeout", -}; - -void bonito_irq_init(void) -{ - u32 i; - - for (i = LOONGSON_IRQ_BASE; i < LOONGSON_IRQ_BASE + 32; i++) - irq_set_chip_and_handler(i, &bonito_irq_type, - handle_level_irq); - -#ifdef CONFIG_CPU_LOONGSON2E - setup_irq(LOONGSON_IRQ_BASE + 10, &dma_timeout_irqaction); -#endif -} diff --git a/arch/mips/loongson64/common/cmdline.c b/arch/mips/loongson64/common/cmdline.c index a735460682cf..fb1644b01471 100644 --- a/arch/mips/loongson64/common/cmdline.c +++ b/arch/mips/loongson64/common/cmdline.c @@ -39,6 +39,4 @@ void __init prom_init_cmdline(void) strcat(arcs_cmdline, ((char *)l)); strcat(arcs_cmdline, " "); } - - prom_init_machtype(); } diff --git a/arch/mips/loongson64/common/early_printk.c b/arch/mips/loongson64/common/early_printk.c deleted file mode 100644 index 5e2a151aa30c..000000000000 --- a/arch/mips/loongson64/common/early_printk.c +++ /dev/null @@ -1,38 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* early printk support - * - * Copyright (c) 2009 Philippe Vachon <philippe@cowpig.ca> - * Copyright (c) 2009 Lemote Inc. - * Author: Wu Zhangjin, wuzhangjin@gmail.com - */ -#include <linux/serial_reg.h> -#include <asm/setup.h> - -#include <loongson.h> - -#define PORT(base, offset) (u8 *)(base + offset) - -static inline unsigned int serial_in(unsigned char *base, int offset) -{ - return readb(PORT(base, offset)); -} - -static inline void serial_out(unsigned char *base, int offset, int value) -{ - writeb(value, PORT(base, offset)); -} - -void prom_putchar(char c) -{ - int timeout; - unsigned char *uart_base; - - uart_base = (unsigned char *)_loongson_uart_base[0]; - timeout = 1024; - - while (((serial_in(uart_base, UART_LSR) & UART_LSR_THRE) == 0) && - (timeout-- > 0)) - ; - - serial_out(uart_base, UART_TX, c); -} diff --git a/arch/mips/loongson64/common/env.c b/arch/mips/loongson64/common/env.c index 09d5cf4676ca..0daeb7bcf023 100644 --- a/arch/mips/loongson64/common/env.c +++ b/arch/mips/loongson64/common/env.c @@ -30,41 +30,13 @@ u64 loongson_freqctrl[MAX_PACKAGES]; unsigned long long smp_group[4]; -#define parse_even_earlier(res, option, p) \ -do { \ - unsigned int tmp __maybe_unused; \ - \ - if (strncmp(option, (char *)p, strlen(option)) == 0) \ - tmp = kstrtou32((char *)p + strlen(option"="), 10, &res); \ -} while (0) +const char *get_system_type(void) +{ + return "Generic Loongson64 System"; +} void __init prom_init_env(void) { - /* pmon passes arguments in 32bit pointers */ - unsigned int processor_id; - -#ifndef CONFIG_LEFI_FIRMWARE_INTERFACE - int *_prom_envp; - long l; - - /* firmware arguments are initialized in head.S */ - _prom_envp = (int *)fw_arg2; - - l = (long)*_prom_envp; - while (l != 0) { - parse_even_earlier(cpu_clock_freq, "cpuclock", l); - parse_even_earlier(memsize, "memsize", l); - parse_even_earlier(highmemsize, "highmemsize", l); - _prom_envp++; - l = (long)*_prom_envp; - } - if (memsize == 0) - memsize = 256; - - loongson_sysconf.nr_uarts = 1; - - pr_info("memsize=%u, highmemsize=%u\n", memsize, highmemsize); -#else struct boot_params *boot_p; struct loongson_params *loongson_p; struct system_loongson *esys; @@ -182,31 +154,5 @@ void __init prom_init_env(void) if (loongson_sysconf.nr_sensors) memcpy(loongson_sysconf.sensors, esys->sensors, sizeof(struct sensor_device) * loongson_sysconf.nr_sensors); -#endif - if (cpu_clock_freq == 0) { - processor_id = (¤t_cpu_data)->processor_id; - switch (processor_id & PRID_REV_MASK) { - case PRID_REV_LOONGSON2E: - cpu_clock_freq = 533080000; - break; - case PRID_REV_LOONGSON2F: - cpu_clock_freq = 797000000; - break; - case PRID_REV_LOONGSON3A_R1: - case PRID_REV_LOONGSON3A_R2_0: - case PRID_REV_LOONGSON3A_R2_1: - case PRID_REV_LOONGSON3A_R3_0: - case PRID_REV_LOONGSON3A_R3_1: - cpu_clock_freq = 900000000; - break; - case PRID_REV_LOONGSON3B_R1: - case PRID_REV_LOONGSON3B_R2: - cpu_clock_freq = 1000000000; - break; - default: - cpu_clock_freq = 100000000; - break; - } - } pr_info("CpuClock = %u\n", cpu_clock_freq); } diff --git a/arch/mips/loongson64/common/init.c b/arch/mips/loongson64/common/init.c index 912fe61c4fc7..48b44f415059 100644 --- a/arch/mips/loongson64/common/init.c +++ b/arch/mips/loongson64/common/init.c @@ -12,9 +12,6 @@ #include <loongson.h> -/* Loongson CPU address windows config space base address */ -unsigned long __maybe_unused _loongson_addrwincfg_base; - static void __init mips_nmi_setup(void) { void *base; @@ -27,11 +24,6 @@ static void __init mips_nmi_setup(void) void __init prom_init(void) { -#ifdef CONFIG_CPU_SUPPORTS_ADDRWINCFG - _loongson_addrwincfg_base = (unsigned long) - ioremap(LOONGSON_ADDRWINCFG_BASE, LOONGSON_ADDRWINCFG_SIZE); -#endif - prom_init_cmdline(); prom_init_env(); @@ -39,14 +31,11 @@ void __init prom_init(void) set_io_port_base((unsigned long) ioremap(LOONGSON_PCIIO_BASE, LOONGSON_PCIIO_SIZE)); -#ifdef CONFIG_NUMA prom_init_numa_memory(); -#else - prom_init_memory(); -#endif - /*init the uart base address */ - prom_init_uart_base(); + /* Hardcode to CPU UART 0 */ + setup_8250_early_printk_port(TO_UNCAC(LOONGSON_REG_BASE + 0x1e0), 0, 1024); + register_smp_ops(&loongson3_smp_ops); board_nmi_handler_setup = mips_nmi_setup; } diff --git a/arch/mips/loongson64/common/irq.c b/arch/mips/loongson64/common/irq.c deleted file mode 100644 index 0ea93c1c0a97..000000000000 --- a/arch/mips/loongson64/common/irq.c +++ /dev/null @@ -1,63 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Copyright (C) 2007 Lemote Inc. & Institute of Computing Technology - * Author: Fuxin Zhang, zhangfx@lemote.com - */ -#include <linux/delay.h> -#include <linux/interrupt.h> - -#include <loongson.h> -/* - * the first level int-handler will jump here if it is a bonito irq - */ -void bonito_irqdispatch(void) -{ - u32 int_status; - int i; - - /* workaround the IO dma problem: let cpu looping to allow DMA finish */ - int_status = LOONGSON_INTISR; - while (int_status & (1 << 10)) { - udelay(1); - int_status = LOONGSON_INTISR; - } - - /* Get pending sources, masked by current enables */ - int_status = LOONGSON_INTISR & LOONGSON_INTEN; - - if (int_status) { - i = __ffs(int_status); - do_IRQ(LOONGSON_IRQ_BASE + i); - } -} - -asmlinkage void plat_irq_dispatch(void) -{ - unsigned int pending; - - pending = read_c0_cause() & read_c0_status() & ST0_IM; - - /* machine-specific plat_irq_dispatch */ - mach_irq_dispatch(pending); -} - -void __init arch_init_irq(void) -{ - /* - * Clear all of the interrupts while we change the able around a bit. - * int-handler is not on bootstrap - */ - clear_c0_status(ST0_IM | ST0_BEV); - - /* no steer */ - LOONGSON_INTSTEER = 0; - - /* - * Mask out all interrupt by writing "1" to all bit position in - * the interrupt reset reg. - */ - LOONGSON_INTENCLR = ~0; - - /* machine specific irq init */ - mach_init_irq(); -} diff --git a/arch/mips/loongson64/common/machtype.c b/arch/mips/loongson64/common/machtype.c deleted file mode 100644 index 4e42d929f1c7..000000000000 --- a/arch/mips/loongson64/common/machtype.c +++ /dev/null @@ -1,63 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Copyright (C) 2009 Lemote Inc. - * Author: Wu Zhangjin, wuzhangjin@gmail.com - * - * Copyright (c) 2009 Zhang Le <r0bertz@gentoo.org> - */ -#include <linux/errno.h> -#include <asm/bootinfo.h> - -#include <loongson.h> -#include <machine.h> - -/* please ensure the length of the machtype string is less than 50 */ -#define MACHTYPE_LEN 50 - -static const char *system_types[] = { - [MACH_LOONGSON_UNKNOWN] = "unknown loongson machine", - [MACH_LEMOTE_FL2E] = "lemote-fuloong-2e-box", - [MACH_LEMOTE_FL2F] = "lemote-fuloong-2f-box", - [MACH_LEMOTE_ML2F7] = "lemote-mengloong-2f-7inches", - [MACH_LEMOTE_YL2F89] = "lemote-yeeloong-2f-8.9inches", - [MACH_DEXXON_GDIUM2F10] = "dexxon-gdium-2f", - [MACH_LEMOTE_NAS] = "lemote-nas-2f", - [MACH_LEMOTE_LL2F] = "lemote-lynloong-2f", - [MACH_LOONGSON_GENERIC] = "generic-loongson-machine", - [MACH_LOONGSON_END] = NULL, -}; - -const char *get_system_type(void) -{ - return system_types[mips_machtype]; -} - -void __weak __init mach_prom_init_machtype(void) -{ -} - -void __init prom_init_machtype(void) -{ - char *p, str[MACHTYPE_LEN + 1]; - int machtype = MACH_LEMOTE_FL2E; - - mips_machtype = LOONGSON_MACHTYPE; - - p = strstr(arcs_cmdline, "machtype="); - if (!p) { - mach_prom_init_machtype(); - return; - } - p += strlen("machtype="); - strncpy(str, p, MACHTYPE_LEN); - str[MACHTYPE_LEN] = '\0'; - p = strstr(str, " "); - if (p) - *p = '\0'; - - for (; system_types[machtype]; machtype++) - if (strstr(system_types[machtype], str)) { - mips_machtype = machtype; - break; - } -} diff --git a/arch/mips/loongson64/common/mem.c b/arch/mips/loongson64/common/mem.c deleted file mode 100644 index 4254ac4ec616..000000000000 --- a/arch/mips/loongson64/common/mem.c +++ /dev/null @@ -1,157 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - */ -#include <linux/fs.h> -#include <linux/fcntl.h> -#include <linux/memblock.h> -#include <linux/mm.h> - -#include <asm/bootinfo.h> - -#include <loongson.h> -#include <boot_param.h> -#include <mem.h> -#include <pci.h> - -#ifndef CONFIG_LEFI_FIRMWARE_INTERFACE - -u32 memsize, highmemsize; - -void __init prom_init_memory(void) -{ - add_memory_region(0x0, (memsize << 20), BOOT_MEM_RAM); - - add_memory_region(memsize << 20, LOONGSON_PCI_MEM_START - (memsize << - 20), BOOT_MEM_RESERVED); - -#ifdef CONFIG_CPU_SUPPORTS_ADDRWINCFG - { - int bit; - - bit = fls(memsize + highmemsize); - if (bit != ffs(memsize + highmemsize)) - bit += 20; - else - bit = bit + 20 - 1; - - /* set cpu window3 to map CPU to DDR: 2G -> 2G */ - LOONGSON_ADDRWIN_CPUTODDR(ADDRWIN_WIN3, 0x80000000ul, - 0x80000000ul, (1 << bit)); - mmiowb(); - } -#endif /* !CONFIG_CPU_SUPPORTS_ADDRWINCFG */ - -#ifdef CONFIG_64BIT - if (highmemsize > 0) - add_memory_region(LOONGSON_HIGHMEM_START, - highmemsize << 20, BOOT_MEM_RAM); - - add_memory_region(LOONGSON_PCI_MEM_END + 1, LOONGSON_HIGHMEM_START - - LOONGSON_PCI_MEM_END - 1, BOOT_MEM_RESERVED); - -#endif /* !CONFIG_64BIT */ -} - -#else /* CONFIG_LEFI_FIRMWARE_INTERFACE */ - -void __init prom_init_memory(void) -{ - int i; - u32 node_id; - u32 mem_type; - - /* parse memory information */ - for (i = 0; i < loongson_memmap->nr_map; i++) { - node_id = loongson_memmap->map[i].node_id; - mem_type = loongson_memmap->map[i].mem_type; - - if (node_id != 0) - continue; - - switch (mem_type) { - case SYSTEM_RAM_LOW: - memblock_add(loongson_memmap->map[i].mem_start, - (u64)loongson_memmap->map[i].mem_size << 20); - break; - case SYSTEM_RAM_HIGH: - memblock_add(loongson_memmap->map[i].mem_start, - (u64)loongson_memmap->map[i].mem_size << 20); - break; - case SYSTEM_RAM_RESERVED: - memblock_reserve(loongson_memmap->map[i].mem_start, - (u64)loongson_memmap->map[i].mem_size << 20); - break; - } - } -} - -#endif /* CONFIG_LEFI_FIRMWARE_INTERFACE */ - -/* override of arch/mips/mm/cache.c: __uncached_access */ -int __uncached_access(struct file *file, unsigned long addr) -{ - if (file->f_flags & O_DSYNC) - return 1; - - return addr >= __pa(high_memory) || - ((addr >= LOONGSON_MMIO_MEM_START) && - (addr < LOONGSON_MMIO_MEM_END)); -} - -#ifdef CONFIG_CPU_SUPPORTS_UNCACHED_ACCELERATED - -#include <linux/pci.h> -#include <linux/sched.h> -#include <asm/current.h> - -static unsigned long uca_start, uca_end; - -pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn, - unsigned long size, pgprot_t vma_prot) -{ - unsigned long offset = pfn << PAGE_SHIFT; - unsigned long end = offset + size; - - if (__uncached_access(file, offset)) { - if (uca_start && (offset >= uca_start) && - (end <= uca_end)) - return __pgprot((pgprot_val(vma_prot) & - ~_CACHE_MASK) | - _CACHE_UNCACHED_ACCELERATED); - else - return pgprot_noncached(vma_prot); - } - return vma_prot; -} - -static int __init find_vga_mem_init(void) -{ - struct pci_dev *dev = 0; - struct resource *r; - int idx; - - if (uca_start) - return 0; - - for_each_pci_dev(dev) { - if ((dev->class >> 16) == PCI_BASE_CLASS_DISPLAY) { - for (idx = 0; idx < PCI_NUM_RESOURCES; idx++) { - r = &dev->resource[idx]; - if (!r->start && r->end) - continue; - if (r->flags & IORESOURCE_IO) - continue; - if (r->flags & IORESOURCE_MEM) { - uca_start = r->start; - uca_end = r->end; - return 0; - } - } - } - } - - return 0; -} - -late_initcall(find_vga_mem_init); -#endif /* !CONFIG_CPU_SUPPORTS_UNCACHED_ACCELERATED */ diff --git a/arch/mips/loongson64/common/pci.c b/arch/mips/loongson64/common/pci.c index 2d9755c49524..7bbe2388f38e 100644 --- a/arch/mips/loongson64/common/pci.c +++ b/arch/mips/loongson64/common/pci.c @@ -81,15 +81,12 @@ static int __init pcibios_init(void) setup_pcimap(); loongson_pci_controller.io_map_base = mips_io_port_base; -#ifdef CONFIG_LEFI_FIRMWARE_INTERFACE loongson_pci_mem_resource.start = loongson_sysconf.pci_mem_start_addr; loongson_pci_mem_resource.end = loongson_sysconf.pci_mem_end_addr; -#endif + register_pci_controller(&loongson_pci_controller); -#ifdef CONFIG_CPU_LOONGSON64 sbx00_acpi_init(); -#endif return 0; } diff --git a/arch/mips/loongson64/common/platform.c b/arch/mips/loongson64/common/platform.c deleted file mode 100644 index 0084820cffaa..000000000000 --- a/arch/mips/loongson64/common/platform.c +++ /dev/null @@ -1,27 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Copyright (C) 2009 Lemote Inc. - * Author: Wu Zhangjin, wuzhangjin@gmail.com - */ - -#include <linux/err.h> -#include <linux/smp.h> -#include <linux/platform_device.h> - -static struct platform_device loongson2_cpufreq_device = { - .name = "loongson2_cpufreq", - .id = -1, -}; - -static int __init loongson2_cpufreq_init(void) -{ - struct cpuinfo_mips *c = ¤t_cpu_data; - - /* Only 2F revision and it's successors support CPUFreq */ - if ((c->processor_id & PRID_REV_MASK) >= PRID_REV_LOONGSON2F) - return platform_device_register(&loongson2_cpufreq_device); - - return -ENODEV; -} - -arch_initcall(loongson2_cpufreq_init); diff --git a/arch/mips/loongson64/common/pm.c b/arch/mips/loongson64/common/pm.c index b8aed878d912..7c8556f09781 100644 --- a/arch/mips/loongson64/common/pm.c +++ b/arch/mips/loongson64/common/pm.c @@ -60,56 +60,6 @@ void __weak setup_wakeup_events(void) { } -/* - * Check wakeup events - */ -int __weak wakeup_loongson(void) -{ - return 1; -} - -/* - * If the events are really what we want to wakeup the CPU, wake it up - * otherwise put the CPU asleep again. - */ -static void wait_for_wakeup_events(void) -{ - while (!wakeup_loongson()) - LOONGSON_CHIPCFG(0) &= ~0x7; -} - -/* - * Stop all perf counters - * - * $24 is the control register of Loongson perf counter - */ -static inline void stop_perf_counters(void) -{ - __write_64bit_c0_register($24, 0, 0); -} - - -static void loongson_suspend_enter(void) -{ - static unsigned int cached_cpu_freq; - - /* setup wakeup events via enabling the IRQs */ - setup_wakeup_events(); - - stop_perf_counters(); - - cached_cpu_freq = LOONGSON_CHIPCFG(0); - - /* Put CPU into wait mode */ - LOONGSON_CHIPCFG(0) &= ~0x7; - - /* wait for the given events to wakeup cpu from wait mode */ - wait_for_wakeup_events(); - - LOONGSON_CHIPCFG(0) = cached_cpu_freq; - mmiowb(); -} - void __weak mach_suspend(void) { } @@ -122,9 +72,6 @@ static int loongson_pm_enter(suspend_state_t state) { mach_suspend(); - /* processor specific suspend */ - loongson_suspend_enter(); - mach_resume(); return 0; diff --git a/arch/mips/loongson64/common/reset.c b/arch/mips/loongson64/common/reset.c index ce39e918e4d5..88b3bd5fed25 100644 --- a/arch/mips/loongson64/common/reset.c +++ b/arch/mips/loongson64/common/reset.c @@ -17,31 +17,12 @@ static inline void loongson_reboot(void) { -#ifndef CONFIG_CPU_JUMP_WORKAROUNDS ((void (*)(void))ioremap_nocache(LOONGSON_BOOT_BASE, 4)) (); -#else - void (*func)(void); - - func = (void *)ioremap_nocache(LOONGSON_BOOT_BASE, 4); - - __asm__ __volatile__( - " .set noat \n" - " jr %[func] \n" - " .set at \n" - : /* No outputs */ - : [func] "r" (func)); -#endif } static void loongson_restart(char *command) { -#ifndef CONFIG_LEFI_FIRMWARE_INTERFACE - /* do preparation for reboot */ - mach_prepare_reboot(); - /* reboot via jumping to boot base address */ - loongson_reboot(); -#else void (*fw_restart)(void) = (void *)loongson_sysconf.restart_addr; fw_restart(); @@ -49,20 +30,10 @@ static void loongson_restart(char *command) if (cpu_wait) cpu_wait(); } -#endif } static void loongson_poweroff(void) { -#ifndef CONFIG_LEFI_FIRMWARE_INTERFACE - mach_prepare_shutdown(); - - /* - * It needs a wait loop here, but mips/kernel/reset.c already calls - * a generic delay loop, machine_hang(), so simply return. - */ - return; -#else void (*fw_poweroff)(void) = (void *)loongson_sysconf.poweroff_addr; fw_poweroff(); @@ -70,7 +41,6 @@ static void loongson_poweroff(void) if (cpu_wait) cpu_wait(); } -#endif } static void loongson_halt(void) diff --git a/arch/mips/loongson64/common/serial.c b/arch/mips/loongson64/common/serial.c deleted file mode 100644 index 98c3a7feb10f..000000000000 --- a/arch/mips/loongson64/common/serial.c +++ /dev/null @@ -1,117 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org) - * - * Copyright (C) 2009 Lemote, Inc. - * Author: Yan hua (yanhua@lemote.com) - * Author: Wu Zhangjin (wuzhangjin@gmail.com) - */ - -#include <linux/io.h> -#include <linux/module.h> -#include <linux/serial_8250.h> - -#include <asm/bootinfo.h> - -#include <loongson.h> -#include <machine.h> - -#define PORT(int, clk) \ -{ \ - .irq = int, \ - .uartclk = clk, \ - .iotype = UPIO_PORT, \ - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, \ - .regshift = 0, \ -} - -#define PORT_M(int, clk) \ -{ \ - .irq = MIPS_CPU_IRQ_BASE + (int), \ - .uartclk = clk, \ - .iotype = UPIO_MEM, \ - .membase = (void __iomem *)NULL, \ - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, \ - .regshift = 0, \ -} - -static struct plat_serial8250_port uart8250_data[][MAX_UARTS + 1] = { - [MACH_LOONGSON_UNKNOWN] = {}, - [MACH_LEMOTE_FL2E] = {PORT(4, 1843200), {} }, - [MACH_LEMOTE_FL2F] = {PORT(3, 1843200), {} }, - [MACH_LEMOTE_ML2F7] = {PORT_M(3, 3686400), {} }, - [MACH_LEMOTE_YL2F89] = {PORT_M(3, 3686400), {} }, - [MACH_DEXXON_GDIUM2F10] = {PORT_M(3, 3686400), {} }, - [MACH_LEMOTE_NAS] = {PORT_M(3, 3686400), {} }, - [MACH_LEMOTE_LL2F] = {PORT(3, 1843200), {} }, - [MACH_LOONGSON_GENERIC] = {PORT_M(2, 25000000), {} }, - [MACH_LOONGSON_END] = {}, -}; - -static struct platform_device uart8250_device = { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM, -}; - -static int __init serial_init(void) -{ - int i; - unsigned char iotype; - - iotype = uart8250_data[mips_machtype][0].iotype; - - if (UPIO_MEM == iotype) { - uart8250_data[mips_machtype][0].mapbase = - loongson_uart_base[0]; - uart8250_data[mips_machtype][0].membase = - (void __iomem *)_loongson_uart_base[0]; - } - else if (UPIO_PORT == iotype) - uart8250_data[mips_machtype][0].iobase = - loongson_uart_base[0] - LOONGSON_PCIIO_BASE; - - if (loongson_sysconf.uarts[0].uartclk) - uart8250_data[mips_machtype][0].uartclk = - loongson_sysconf.uarts[0].uartclk; - - for (i = 1; i < loongson_sysconf.nr_uarts; i++) { - iotype = loongson_sysconf.uarts[i].iotype; - uart8250_data[mips_machtype][i].iotype = iotype; - loongson_uart_base[i] = loongson_sysconf.uarts[i].uart_base; - - if (UPIO_MEM == iotype) { - uart8250_data[mips_machtype][i].irq = - MIPS_CPU_IRQ_BASE + loongson_sysconf.uarts[i].int_offset; - uart8250_data[mips_machtype][i].mapbase = - loongson_uart_base[i]; - uart8250_data[mips_machtype][i].membase = - ioremap_nocache(loongson_uart_base[i], 8); - } else if (UPIO_PORT == iotype) { - uart8250_data[mips_machtype][i].irq = - loongson_sysconf.uarts[i].int_offset; - uart8250_data[mips_machtype][i].iobase = - loongson_uart_base[i] - LOONGSON_PCIIO_BASE; - } - - uart8250_data[mips_machtype][i].uartclk = - loongson_sysconf.uarts[i].uartclk; - uart8250_data[mips_machtype][i].flags = - UPF_BOOT_AUTOCONF | UPF_SKIP_TEST; - } - - memset(&uart8250_data[mips_machtype][loongson_sysconf.nr_uarts], - 0, sizeof(struct plat_serial8250_port)); - uart8250_device.dev.platform_data = uart8250_data[mips_machtype]; - - return platform_device_register(&uart8250_device); -} -module_init(serial_init); - -static void __exit serial_exit(void) -{ - platform_device_unregister(&uart8250_device); -} -module_exit(serial_exit); diff --git a/arch/mips/loongson64/common/setup.c b/arch/mips/loongson64/common/setup.c index bc2da4c140c4..4fd27f4f90ed 100644 --- a/arch/mips/loongson64/common/setup.c +++ b/arch/mips/loongson64/common/setup.c @@ -11,11 +11,6 @@ #include <loongson.h> -#ifdef CONFIG_VT -#include <linux/console.h> -#include <linux/screen_info.h> -#endif - static void wbflush_loongson(void) { asm(".set\tpush\n\t" @@ -32,20 +27,4 @@ EXPORT_SYMBOL(__wbflush); void __init plat_mem_setup(void) { -#ifdef CONFIG_VT -#if defined(CONFIG_VGA_CONSOLE) - conswitchp = &vga_con; - - screen_info = (struct screen_info) { - .orig_x = 0, - .orig_y = 25, - .orig_video_cols = 80, - .orig_video_lines = 25, - .orig_video_isVGA = VIDEO_TYPE_VGAC, - .orig_video_points = 16, - }; -#elif defined(CONFIG_DUMMY_CONSOLE) - conswitchp = &dummy_con; -#endif -#endif } diff --git a/arch/mips/loongson64/common/time.c b/arch/mips/loongson64/common/time.c index e78760ce475b..1245f22cec84 100644 --- a/arch/mips/loongson64/common/time.c +++ b/arch/mips/loongson64/common/time.c @@ -11,7 +11,6 @@ #include <asm/hpet.h> #include <loongson.h> -#include <cs5536/cs5536_mfgpt.h> void __init plat_time_init(void) { @@ -20,8 +19,6 @@ void __init plat_time_init(void) #ifdef CONFIG_RS780_HPET setup_hpet_timer(); -#else - setup_mfgpt0_timer(); #endif } diff --git a/arch/mips/loongson64/common/uart_base.c b/arch/mips/loongson64/common/uart_base.c deleted file mode 100644 index e88d937f10fe..000000000000 --- a/arch/mips/loongson64/common/uart_base.c +++ /dev/null @@ -1,46 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Copyright (C) 2009 Lemote Inc. - * Author: Wu Zhangjin, wuzhangjin@gmail.com - */ - -#include <linux/export.h> -#include <asm/bootinfo.h> - -#include <loongson.h> - -/* raw */ -unsigned long loongson_uart_base[MAX_UARTS] = {}; -/* ioremapped */ -unsigned long _loongson_uart_base[MAX_UARTS] = {}; - -EXPORT_SYMBOL(loongson_uart_base); -EXPORT_SYMBOL(_loongson_uart_base); - -void prom_init_loongson_uart_base(void) -{ - switch (mips_machtype) { - case MACH_LOONGSON_GENERIC: - /* The CPU provided serial port (CPU) */ - loongson_uart_base[0] = LOONGSON_REG_BASE + 0x1e0; - break; - case MACH_LEMOTE_FL2E: - loongson_uart_base[0] = LOONGSON_PCIIO_BASE + 0x3f8; - break; - case MACH_LEMOTE_FL2F: - case MACH_LEMOTE_LL2F: - loongson_uart_base[0] = LOONGSON_PCIIO_BASE + 0x2f8; - break; - case MACH_LEMOTE_ML2F7: - case MACH_LEMOTE_YL2F89: - case MACH_DEXXON_GDIUM2F10: - case MACH_LEMOTE_NAS: - default: - /* The CPU provided serial port (LPC) */ - loongson_uart_base[0] = LOONGSON_LIO1_BASE + 0x3f8; - break; - } - - _loongson_uart_base[0] = - (unsigned long)ioremap_nocache(loongson_uart_base[0], 8); -} diff --git a/arch/mips/loongson64/loongson-3/irq.c b/arch/mips/loongson64/loongson-3/irq.c index 5605061f5f98..79ad797497e4 100644 --- a/arch/mips/loongson64/loongson-3/irq.c +++ b/arch/mips/loongson64/loongson-3/irq.c @@ -78,8 +78,12 @@ static void ht_irqdispatch(void) #define UNUSED_IPS (CAUSEF_IP5 | CAUSEF_IP4 | CAUSEF_IP1 | CAUSEF_IP0) -void mach_irq_dispatch(unsigned int pending) +asmlinkage void plat_irq_dispatch(void) { + unsigned int pending; + + pending = read_c0_cause() & read_c0_status() & ST0_IM; + if (pending & CAUSEF_IP7) do_IRQ(LOONGSON_TIMER_IRQ); #if defined(CONFIG_SMP) @@ -127,7 +131,7 @@ void irq_router_init(void) LOONGSON_INT_ROUTER_INTEN | (0xffff << 16) | 0x1 << 10; } -void __init mach_init_irq(void) +void __init arch_init_irq(void) { struct irq_chip *chip; diff --git a/arch/mips/loongson64/loongson-3/numa.c b/arch/mips/loongson64/loongson-3/numa.c index 8f20d2cb3767..ef94a2278561 100644 --- a/arch/mips/loongson64/loongson-3/numa.c +++ b/arch/mips/loongson64/loongson-3/numa.c @@ -26,12 +26,15 @@ #include <asm/wbflush.h> #include <boot_param.h> -static struct node_data prealloc__node_data[MAX_NUMNODES]; +static struct pglist_data prealloc__node_data[MAX_NUMNODES]; unsigned char __node_distances[MAX_NUMNODES][MAX_NUMNODES]; EXPORT_SYMBOL(__node_distances); -struct node_data *__node_data[MAX_NUMNODES]; +struct pglist_data *__node_data[MAX_NUMNODES]; EXPORT_SYMBOL(__node_data); +cpumask_t __node_cpumask[MAX_NUMNODES]; +EXPORT_SYMBOL(__node_cpumask); + static void enable_lpa(void) { unsigned long value; @@ -214,7 +217,7 @@ static __init void prom_meminit(void) if (node_online(node)) { szmem(node); node_mem_init(node); - cpumask_clear(&__node_data[(node)]->cpumask); + cpumask_clear(&__node_cpumask[node]); } } memblocks_present(); @@ -228,7 +231,7 @@ static __init void prom_meminit(void) if (loongson_sysconf.reserved_cpus_mask & (1<<cpu)) continue; - cpumask_set_cpu(active_cpu, &__node_data[(node)]->cpumask); + cpumask_set_cpu(active_cpu, &__node_cpumask[node]); pr_info("NUMA: set cpumask cpu %d on node %d\n", active_cpu, node); active_cpu++; |