diff options
author | Ajay Kishore <akisho@codeaurora.org> | 2020-03-27 23:32:08 +0100 |
---|---|---|
committer | Linus Walleij <linus.walleij@linaro.org> | 2020-03-28 00:36:18 +0100 |
commit | 13bec8d49bdf10aab4e1570ef42417f6bfbb6126 (patch) | |
tree | 5a96ce274b39a1ea84e22da00862908a189d3ef5 | |
parent | 1592c4b9935fa8a3b7c297955bb872a357e5a3b6 (diff) | |
download | linux-13bec8d49bdf10aab4e1570ef42417f6bfbb6126.tar.bz2 |
pinctrl: qcom: use scm_call to route GPIO irq to Apps
For IPQ806x targets, TZ protects the registers that are used to
configure the routing of interrupts to a target processor.
To resolve this, this patch uses scm call to route GPIO interrupts
to application processor. Also the scm call interface is changed.
Signed-off-by: Ajay Kishore <akisho@codeaurora.org>
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Link: https://lore.kernel.org/r/20200327223209.20409-1-ansuelsmth@gmail.com
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-rw-r--r-- | drivers/pinctrl/qcom/pinctrl-msm.c | 43 |
1 files changed, 37 insertions, 6 deletions
diff --git a/drivers/pinctrl/qcom/pinctrl-msm.c b/drivers/pinctrl/qcom/pinctrl-msm.c index 173be7d4f00c..75fee04dac53 100644 --- a/drivers/pinctrl/qcom/pinctrl-msm.c +++ b/drivers/pinctrl/qcom/pinctrl-msm.c @@ -22,6 +22,8 @@ #include <linux/reboot.h> #include <linux/pm.h> #include <linux/log2.h> +#include <linux/qcom_scm.h> +#include <linux/io.h> #include <linux/soc/qcom/irq.h> @@ -60,6 +62,8 @@ struct msm_pinctrl { struct irq_chip irq_chip; int irq; + bool intr_target_use_scm; + raw_spinlock_t lock; DECLARE_BITMAP(dual_edge_irqs, MAX_NR_GPIO); @@ -68,6 +72,7 @@ struct msm_pinctrl { const struct msm_pinctrl_soc_data *soc; void __iomem *regs[MAX_NR_TILES]; + u32 phys_base[MAX_NR_TILES]; }; #define MSM_ACCESSOR(name) \ @@ -882,11 +887,31 @@ static int msm_gpio_irq_set_type(struct irq_data *d, unsigned int type) else clear_bit(d->hwirq, pctrl->dual_edge_irqs); - /* Route interrupts to application cpu */ - val = msm_readl_intr_target(pctrl, g); - val &= ~(7 << g->intr_target_bit); - val |= g->intr_target_kpss_val << g->intr_target_bit; - msm_writel_intr_target(val, pctrl, g); + /* Route interrupts to application cpu. + * With intr_target_use_scm interrupts are routed to + * application cpu using scm calls. + */ + if (pctrl->intr_target_use_scm) { + u32 addr = pctrl->phys_base[0] + g->intr_target_reg; + int ret; + + qcom_scm_io_readl(addr, &val); + + val &= ~(7 << g->intr_target_bit); + val |= g->intr_target_kpss_val << g->intr_target_bit; + + ret = qcom_scm_io_writel(addr, val); + if (ret) + dev_err(pctrl->dev, + "Failed routing %lu interrupt to Apps proc", + d->hwirq); + } + } else { + val = msm_readl_intr_target(pctrl, g); + val &= ~(7 << g->intr_target_bit); + val |= g->intr_target_kpss_val << g->intr_target_bit; + msm_writel_intr_target(val, pctrl, g); + } /* Update configuration for gpio. * RAW_STATUS_EN is left on for all gpio irqs. Due to the @@ -1241,6 +1266,9 @@ int msm_pinctrl_probe(struct platform_device *pdev, pctrl->dev = &pdev->dev; pctrl->soc = soc_data; pctrl->chip = msm_gpio_template; + pctrl->intr_target_use_scm = of_device_is_compatible( + pctrl->dev->of_node, + "qcom,ipq8064-pinctrl"); raw_spin_lock_init(&pctrl->lock); @@ -1253,9 +1281,12 @@ int msm_pinctrl_probe(struct platform_device *pdev, return PTR_ERR(pctrl->regs[i]); } } else { - pctrl->regs[0] = devm_platform_ioremap_resource(pdev, 0); + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + pctrl->regs[0] = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(pctrl->regs[0])) return PTR_ERR(pctrl->regs[0]); + + pctrl->phys_base[0] = res->start; } msm_pinctrl_setup_pm_reset(pctrl); |