summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2011-05-19 17:44:13 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2011-05-19 17:44:13 -0700
commit0f1bdc1815c4cb29b3cd71a7091b478e426faa0b (patch)
treeb4d70c6a305d91bf7d1c8a6bbf87508587d55633
parent80fe02b5daf176f99d3afc8f6c9dc9dece019836 (diff)
parenta18f22a968de17b29f2310cdb7ba69163e65ec15 (diff)
downloadlinux-0f1bdc1815c4cb29b3cd71a7091b478e426faa0b.tar.bz2
Merge branch 'timers-clocksource-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'timers-clocksource-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: clocksource: convert mips to generic i8253 clocksource clocksource: convert x86 to generic i8253 clocksource clocksource: convert footbridge to generic i8253 clocksource clocksource: add common i8253 PIT clocksource blackfin: convert to clocksource_register_hz mips: convert to clocksource_register_hz/khz sparc: convert to clocksource_register_hz/khz alpha: convert to clocksource_register_hz microblaze: convert to clocksource_register_hz/khz ia64: convert to clocksource_register_hz/khz x86: Convert remaining x86 clocksources to clocksource_register_hz/khz Make clocksource name const
-rw-r--r--arch/arm/include/asm/i8253.h15
-rw-r--r--arch/arm/mach-footbridge/Kconfig2
-rw-r--r--arch/arm/mach-footbridge/isa-timer.c45
-rw-r--r--arch/blackfin/kernel/time-ts.c35
-rw-r--r--arch/ia64/kernel/cyclone.c6
-rw-r--r--arch/ia64/kernel/time.c9
-rw-r--r--arch/ia64/sn/kernel/sn2/timer.c6
-rw-r--r--arch/microblaze/kernel/timer.c6
-rw-r--r--arch/mips/Kconfig1
-rw-r--r--arch/mips/alchemy/common/time.c3
-rw-r--r--arch/mips/cavium-octeon/csrc-octeon.c3
-rw-r--r--arch/mips/include/asm/i8253.h5
-rw-r--r--arch/mips/include/asm/time.h6
-rw-r--r--arch/mips/jz4740/time.c3
-rw-r--r--arch/mips/kernel/cevt-txx9.c3
-rw-r--r--arch/mips/kernel/csrc-bcm1480.c3
-rw-r--r--arch/mips/kernel/csrc-ioasic.c4
-rw-r--r--arch/mips/kernel/csrc-powertv.c35
-rw-r--r--arch/mips/kernel/csrc-r4k.c4
-rw-r--r--arch/mips/kernel/csrc-sb1250.c3
-rw-r--r--arch/mips/kernel/i8253.c78
-rw-r--r--arch/mips/loongson/common/cs5536/cs5536_mfgpt.c5
-rw-r--r--arch/mips/sgi-ip27/ip27-timer.c3
-rw-r--r--arch/x86/Kconfig1
-rw-r--r--arch/x86/include/asm/i8253.h2
-rw-r--r--arch/x86/kernel/apb_timer.c10
-rw-r--r--arch/x86/kernel/i8253.c80
-rw-r--r--arch/x86/kernel/kvmclock.c6
-rw-r--r--arch/x86/lguest/boot.c4
-rw-r--r--arch/x86/platform/uv/uv_time.c6
-rw-r--r--arch/x86/xen/time.c6
-rw-r--r--drivers/Kconfig3
-rw-r--r--drivers/char/hpet.c6
-rw-r--r--drivers/clocksource/Kconfig2
-rw-r--r--drivers/clocksource/Makefile1
-rw-r--r--drivers/clocksource/cyclone.c10
-rw-r--r--drivers/clocksource/i8253.c88
-rw-r--r--include/linux/clocksource.h4
38 files changed, 157 insertions, 355 deletions
diff --git a/arch/arm/include/asm/i8253.h b/arch/arm/include/asm/i8253.h
new file mode 100644
index 000000000000..70656b69d5ce
--- /dev/null
+++ b/arch/arm/include/asm/i8253.h
@@ -0,0 +1,15 @@
+#ifndef __ASMARM_I8253_H
+#define __ASMARM_I8253_H
+
+/* i8253A PIT registers */
+#define PIT_MODE 0x43
+#define PIT_CH0 0x40
+
+#define PIT_LATCH ((PIT_TICK_RATE + HZ / 2) / HZ)
+
+extern raw_spinlock_t i8253_lock;
+
+#define outb_pit outb_p
+#define inb_pit inb_p
+
+#endif
diff --git a/arch/arm/mach-footbridge/Kconfig b/arch/arm/mach-footbridge/Kconfig
index bdd257921cfb..46adca068f2c 100644
--- a/arch/arm/mach-footbridge/Kconfig
+++ b/arch/arm/mach-footbridge/Kconfig
@@ -4,6 +4,7 @@ menu "Footbridge Implementations"
config ARCH_CATS
bool "CATS"
+ select CLKSRC_I8253
select FOOTBRIDGE_HOST
select ISA
select ISA_DMA
@@ -59,6 +60,7 @@ config ARCH_EBSA285_HOST
config ARCH_NETWINDER
bool "NetWinder"
+ select CLKSRC_I8253
select FOOTBRIDGE_HOST
select ISA
select ISA_DMA
diff --git a/arch/arm/mach-footbridge/isa-timer.c b/arch/arm/mach-footbridge/isa-timer.c
index 441c6ce0d555..7020f1a3feca 100644
--- a/arch/arm/mach-footbridge/isa-timer.c
+++ b/arch/arm/mach-footbridge/isa-timer.c
@@ -10,53 +10,16 @@
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/io.h>
+#include <linux/spinlock.h>
#include <linux/timex.h>
#include <asm/irq.h>
-
+#include <asm/i8253.h>
#include <asm/mach/time.h>
#include "common.h"
-#define PIT_MODE 0x43
-#define PIT_CH0 0x40
-
-#define PIT_LATCH ((PIT_TICK_RATE + HZ / 2) / HZ)
-
-static cycle_t pit_read(struct clocksource *cs)
-{
- unsigned long flags;
- static int old_count;
- static u32 old_jifs;
- int count;
- u32 jifs;
-
- raw_local_irq_save(flags);
-
- jifs = jiffies;
- outb_p(0x00, PIT_MODE); /* latch the count */
- count = inb_p(PIT_CH0); /* read the latched count */
- count |= inb_p(PIT_CH0) << 8;
-
- if (count > old_count && jifs == old_jifs)
- count = old_count;
-
- old_count = count;
- old_jifs = jifs;
-
- raw_local_irq_restore(flags);
-
- count = (PIT_LATCH - 1) - count;
-
- return (cycle_t)(jifs * PIT_LATCH) + count;
-}
-
-static struct clocksource pit_cs = {
- .name = "pit",
- .rating = 110,
- .read = pit_read,
- .mask = CLOCKSOURCE_MASK(32),
-};
+DEFINE_RAW_SPINLOCK(i8253_lock);
static void pit_set_mode(enum clock_event_mode mode,
struct clock_event_device *evt)
@@ -121,7 +84,7 @@ static void __init isa_timer_init(void)
pit_ce.max_delta_ns = clockevent_delta2ns(0x7fff, &pit_ce);
pit_ce.min_delta_ns = clockevent_delta2ns(0x000f, &pit_ce);
- clocksource_register_hz(&pit_cs, PIT_TICK_RATE);
+ clocksource_i8253_init();
setup_irq(pit_ce.irq, &pit_timer_irq);
clockevents_register_device(&pit_ce);
diff --git a/arch/blackfin/kernel/time-ts.c b/arch/blackfin/kernel/time-ts.c
index cdb4beb6bc8f..9e9b60d969dc 100644
--- a/arch/blackfin/kernel/time-ts.c
+++ b/arch/blackfin/kernel/time-ts.c
@@ -23,29 +23,6 @@
#include <asm/gptimers.h>
#include <asm/nmi.h>
-/* Accelerators for sched_clock()
- * convert from cycles(64bits) => nanoseconds (64bits)
- * basic equation:
- * ns = cycles / (freq / ns_per_sec)
- * ns = cycles * (ns_per_sec / freq)
- * ns = cycles * (10^9 / (cpu_khz * 10^3))
- * ns = cycles * (10^6 / cpu_khz)
- *
- * Then we use scaling math (suggested by george@mvista.com) to get:
- * ns = cycles * (10^6 * SC / cpu_khz) / SC
- * ns = cycles * cyc2ns_scale / SC
- *
- * And since SC is a constant power of two, we can convert the div
- * into a shift.
- *
- * We can use khz divisor instead of mhz to keep a better precision, since
- * cyc2ns_scale is limited to 10^6 * 2^10, which fits in 32 bits.
- * (mathieu.desnoyers@polymtl.ca)
- *
- * -johnstul@us.ibm.com "math is hard, lets go shopping!"
- */
-
-#define CYC2NS_SCALE_FACTOR 10 /* 2^10, carefully chosen */
#if defined(CONFIG_CYCLES_CLOCKSOURCE)
@@ -63,7 +40,6 @@ static struct clocksource bfin_cs_cycles = {
.rating = 400,
.read = bfin_read_cycles,
.mask = CLOCKSOURCE_MASK(64),
- .shift = CYC2NS_SCALE_FACTOR,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
@@ -75,10 +51,7 @@ static inline unsigned long long bfin_cs_cycles_sched_clock(void)
static int __init bfin_cs_cycles_init(void)
{
- bfin_cs_cycles.mult = \
- clocksource_hz2mult(get_cclk(), bfin_cs_cycles.shift);
-
- if (clocksource_register(&bfin_cs_cycles))
+ if (clocksource_register_hz(&bfin_cs_cycles, get_cclk()))
panic("failed to register clocksource");
return 0;
@@ -111,7 +84,6 @@ static struct clocksource bfin_cs_gptimer0 = {
.rating = 350,
.read = bfin_read_gptimer0,
.mask = CLOCKSOURCE_MASK(32),
- .shift = CYC2NS_SCALE_FACTOR,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
@@ -125,10 +97,7 @@ static int __init bfin_cs_gptimer0_init(void)
{
setup_gptimer0();
- bfin_cs_gptimer0.mult = \
- clocksource_hz2mult(get_sclk(), bfin_cs_gptimer0.shift);
-
- if (clocksource_register(&bfin_cs_gptimer0))
+ if (clocksource_register_hz(&bfin_cs_gptimer0, get_sclk()))
panic("failed to register clocksource");
return 0;
diff --git a/arch/ia64/kernel/cyclone.c b/arch/ia64/kernel/cyclone.c
index 1b811c61bdc6..f64097b5118a 100644
--- a/arch/ia64/kernel/cyclone.c
+++ b/arch/ia64/kernel/cyclone.c
@@ -31,8 +31,6 @@ static struct clocksource clocksource_cyclone = {
.rating = 300,
.read = read_cyclone,
.mask = (1LL << 40) - 1,
- .mult = 0, /*to be calculated*/
- .shift = 16,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
@@ -118,9 +116,7 @@ int __init init_cyclone_clock(void)
/* initialize last tick */
cyclone_mc = cyclone_timer;
clocksource_cyclone.fsys_mmio = cyclone_timer;
- clocksource_cyclone.mult = clocksource_hz2mult(CYCLONE_TIMER_FREQ,
- clocksource_cyclone.shift);
- clocksource_register(&clocksource_cyclone);
+ clocksource_register_hz(&clocksource_cyclone, CYCLONE_TIMER_FREQ);
return 0;
}
diff --git a/arch/ia64/kernel/time.c b/arch/ia64/kernel/time.c
index 156ad803d5b7..04440cc09b40 100644
--- a/arch/ia64/kernel/time.c
+++ b/arch/ia64/kernel/time.c
@@ -73,8 +73,6 @@ static struct clocksource clocksource_itc = {
.rating = 350,
.read = itc_get_cycles,
.mask = CLOCKSOURCE_MASK(64),
- .mult = 0, /*to be calculated*/
- .shift = 16,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
#ifdef CONFIG_PARAVIRT
.resume = paravirt_clocksource_resume,
@@ -365,11 +363,8 @@ ia64_init_itm (void)
ia64_cpu_local_tick();
if (!itc_clocksource) {
- /* Sort out mult/shift values: */
- clocksource_itc.mult =
- clocksource_hz2mult(local_cpu_data->itc_freq,
- clocksource_itc.shift);
- clocksource_register(&clocksource_itc);
+ clocksource_register_hz(&clocksource_itc,
+ local_cpu_data->itc_freq);
itc_clocksource = &clocksource_itc;
}
}
diff --git a/arch/ia64/sn/kernel/sn2/timer.c b/arch/ia64/sn/kernel/sn2/timer.c
index 21d6f09e3447..c34efda122e1 100644
--- a/arch/ia64/sn/kernel/sn2/timer.c
+++ b/arch/ia64/sn/kernel/sn2/timer.c
@@ -33,8 +33,6 @@ static struct clocksource clocksource_sn2 = {
.rating = 450,
.read = read_sn2,
.mask = (1LL << 55) - 1,
- .mult = 0,
- .shift = 10,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
@@ -57,9 +55,7 @@ ia64_sn_udelay (unsigned long usecs)
void __init sn_timer_init(void)
{
clocksource_sn2.fsys_mmio = RTC_COUNTER_ADDR;
- clocksource_sn2.mult = clocksource_hz2mult(sn_rtc_cycles_per_second,
- clocksource_sn2.shift);
- clocksource_register(&clocksource_sn2);
+ clocksource_register_hz(&clocksource_sn2, sn_rtc_cycles_per_second);
ia64_udelay = &ia64_sn_udelay;
}
diff --git a/arch/microblaze/kernel/timer.c b/arch/microblaze/kernel/timer.c
index d8a214f11ac2..e5550ce4e0eb 100644
--- a/arch/microblaze/kernel/timer.c
+++ b/arch/microblaze/kernel/timer.c
@@ -217,16 +217,12 @@ static struct clocksource clocksource_microblaze = {
.rating = 300,
.read = microblaze_read,
.mask = CLOCKSOURCE_MASK(32),
- .shift = 8, /* I can shift it */
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
static int __init microblaze_clocksource_init(void)
{
- clocksource_microblaze.mult =
- clocksource_hz2mult(timer_clock_freq,
- clocksource_microblaze.shift);
- if (clocksource_register(&clocksource_microblaze))
+ if (clocksource_register_hz(&clocksource_microblaze, timer_clock_freq))
panic("failed to register clocksource");
/* stop timer1 */
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 2d1cf9740953..cef1a854487d 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -2395,6 +2395,7 @@ config MMU
config I8253
bool
+ select CLKSRC_I8253
select MIPS_EXTERNAL_TIMER
config ZONE_DMA32
diff --git a/arch/mips/alchemy/common/time.c b/arch/mips/alchemy/common/time.c
index 2aecb2fdf982..d5da6adbf634 100644
--- a/arch/mips/alchemy/common/time.c
+++ b/arch/mips/alchemy/common/time.c
@@ -141,8 +141,7 @@ static int __init alchemy_time_init(unsigned int m2int)
goto cntr_err;
/* register counter1 clocksource and event device */
- clocksource_set_clock(&au1x_counter1_clocksource, 32768);
- clocksource_register(&au1x_counter1_clocksource);
+ clocksource_register_hz(&au1x_counter1_clocksource, 32768);
cd->shift = 32;
cd->mult = div_sc(32768, NSEC_PER_SEC, cd->shift);
diff --git a/arch/mips/cavium-octeon/csrc-octeon.c b/arch/mips/cavium-octeon/csrc-octeon.c
index 26bf71130bf8..29d56afbb02d 100644
--- a/arch/mips/cavium-octeon/csrc-octeon.c
+++ b/arch/mips/cavium-octeon/csrc-octeon.c
@@ -105,8 +105,7 @@ unsigned long long notrace sched_clock(void)
void __init plat_time_init(void)
{
clocksource_mips.rating = 300;
- clocksource_set_clock(&clocksource_mips, octeon_get_clock_rate());
- clocksource_register(&clocksource_mips);
+ clocksource_register_hz(&clocksource_mips, octeon_get_clock_rate());
}
static u64 octeon_udelay_factor;
diff --git a/arch/mips/include/asm/i8253.h b/arch/mips/include/asm/i8253.h
index 48bb82372994..9ad011366f73 100644
--- a/arch/mips/include/asm/i8253.h
+++ b/arch/mips/include/asm/i8253.h
@@ -12,8 +12,13 @@
#define PIT_CH0 0x40
#define PIT_CH2 0x42
+#define PIT_LATCH LATCH
+
extern raw_spinlock_t i8253_lock;
extern void setup_pit_timer(void);
+#define inb_pit inb_p
+#define outb_pit outb_p
+
#endif /* __ASM_I8253_H */
diff --git a/arch/mips/include/asm/time.h b/arch/mips/include/asm/time.h
index c7f1bfef1574..bc14447e69b5 100644
--- a/arch/mips/include/asm/time.h
+++ b/arch/mips/include/asm/time.h
@@ -84,12 +84,6 @@ static inline int init_mips_clocksource(void)
#endif
}
-static inline void clocksource_set_clock(struct clocksource *cs,
- unsigned int clock)
-{
- clocksource_calc_mult_shift(cs, clock, 4);
-}
-
static inline void clockevent_set_clock(struct clock_event_device *cd,
unsigned int clock)
{
diff --git a/arch/mips/jz4740/time.c b/arch/mips/jz4740/time.c
index eaa853a54af6..f83c2dd07a27 100644
--- a/arch/mips/jz4740/time.c
+++ b/arch/mips/jz4740/time.c
@@ -121,8 +121,7 @@ void __init plat_time_init(void)
clockevents_register_device(&jz4740_clockevent);
- clocksource_set_clock(&jz4740_clocksource, clk_rate);
- ret = clocksource_register(&jz4740_clocksource);
+ ret = clocksource_register_hz(&jz4740_clocksource, clk_rate);
if (ret)
printk(KERN_ERR "Failed to register clocksource: %d\n", ret);
diff --git a/arch/mips/kernel/cevt-txx9.c b/arch/mips/kernel/cevt-txx9.c
index 0b7377361e22..f0ab92a1b057 100644
--- a/arch/mips/kernel/cevt-txx9.c
+++ b/arch/mips/kernel/cevt-txx9.c
@@ -51,8 +51,7 @@ void __init txx9_clocksource_init(unsigned long baseaddr,
{
struct txx9_tmr_reg __iomem *tmrptr;
- clocksource_set_clock(&txx9_clocksource.cs, TIMER_CLK(imbusclk));
- clocksource_register(&txx9_clocksource.cs);
+ clocksource_register_hz(&txx9_clocksource.cs, TIMER_CLK(imbusclk));
tmrptr = ioremap(baseaddr, sizeof(struct txx9_tmr_reg));
__raw_writel(TCR_BASE, &tmrptr->tcr);
diff --git a/arch/mips/kernel/csrc-bcm1480.c b/arch/mips/kernel/csrc-bcm1480.c
index 51489f8a825e..f96f99c794a3 100644
--- a/arch/mips/kernel/csrc-bcm1480.c
+++ b/arch/mips/kernel/csrc-bcm1480.c
@@ -49,6 +49,5 @@ void __init sb1480_clocksource_init(void)
plldiv = G_BCM1480_SYS_PLL_DIV(__raw_readq(IOADDR(A_SCD_SYSTEM_CFG)));
zbbus = ((plldiv >> 1) * 50000000) + ((plldiv & 1) * 25000000);
- clocksource_set_clock(cs, zbbus);
- clocksource_register(cs);
+ clocksource_register_hz(cs, zbbus);
}
diff --git a/arch/mips/kernel/csrc-ioasic.c b/arch/mips/kernel/csrc-ioasic.c
index 23da108506b0..46bd7fa98d6c 100644
--- a/arch/mips/kernel/csrc-ioasic.c
+++ b/arch/mips/kernel/csrc-ioasic.c
@@ -59,7 +59,5 @@ void __init dec_ioasic_clocksource_init(void)
printk(KERN_INFO "I/O ASIC clock frequency %dHz\n", freq);
clocksource_dec.rating = 200 + freq / 10000000;
- clocksource_set_clock(&clocksource_dec, freq);
-
- clocksource_register(&clocksource_dec);
+ clocksource_register_hz(&clocksource_dec, freq);
}
diff --git a/arch/mips/kernel/csrc-powertv.c b/arch/mips/kernel/csrc-powertv.c
index a27c16c8690e..2e7c5232da8d 100644
--- a/arch/mips/kernel/csrc-powertv.c
+++ b/arch/mips/kernel/csrc-powertv.c
@@ -78,9 +78,7 @@ static void __init powertv_c0_hpt_clocksource_init(void)
clocksource_mips.rating = 200 + mips_hpt_frequency / 10000000;
- clocksource_set_clock(&clocksource_mips, mips_hpt_frequency);
-
- clocksource_register(&clocksource_mips);
+ clocksource_register_hz(&clocksource_mips, mips_hpt_frequency);
}
/**
@@ -130,43 +128,16 @@ static struct clocksource clocksource_tim_c = {
/**
* powertv_tim_c_clocksource_init - set up a clock source for the TIM_C clock
*
- * The hard part here is coming up with a constant k and shift s such that
- * the 48-bit TIM_C value multiplied by k doesn't overflow and that value,
- * when shifted right by s, yields the corresponding number of nanoseconds.
* We know that TIM_C counts at 27 MHz/8, so each cycle corresponds to
- * 1 / (27,000,000/8) seconds. Multiply that by a billion and you get the
- * number of nanoseconds. Since the TIM_C value has 48 bits and the math is
- * done in 64 bits, avoiding an overflow means that k must be less than
- * 64 - 48 = 16 bits.
+ * 1 / (27,000,000/8) seconds.
*/
static void __init powertv_tim_c_clocksource_init(void)
{
- int prescale;
- unsigned long dividend;
- unsigned long k;
- int s;
- const int max_k_bits = (64 - 48) - 1;
- const unsigned long billion = 1000000000;
const unsigned long counts_per_second = 27000000 / 8;
- prescale = BITS_PER_LONG - ilog2(billion) - 1;
- dividend = billion << prescale;
- k = dividend / counts_per_second;
- s = ilog2(k) - max_k_bits;
-
- if (s < 0)
- s = prescale;
-
- else {
- k >>= s;
- s += prescale;
- }
-
- clocksource_tim_c.mult = k;
- clocksource_tim_c.shift = s;
clocksource_tim_c.rating = 200;
- clocksource_register(&clocksource_tim_c);
+ clocksource_register_hz(&clocksource_tim_c, counts_per_second);
tim_c = (struct tim_c *) asic_reg_addr(tim_ch);
}
diff --git a/arch/mips/kernel/csrc-r4k.c b/arch/mips/kernel/csrc-r4k.c
index e95a3cd48eea..decd1fa38d55 100644
--- a/arch/mips/kernel/csrc-r4k.c
+++ b/arch/mips/kernel/csrc-r4k.c
@@ -30,9 +30,7 @@ int __init init_r4k_clocksource(void)
/* Calculate a somewhat reasonable rating value */
clocksource_mips.rating = 200 + mips_hpt_frequency / 10000000;
- clocksource_set_clock(&clocksource_mips, mips_hpt_frequency);
-
- clocksource_register(&clocksource_mips);
+ clocksource_register_hz(&clocksource_mips, mips_hpt_frequency);
return 0;
}
diff --git a/arch/mips/kernel/csrc-sb1250.c b/arch/mips/kernel/csrc-sb1250.c
index d14d3d1907fa..e9606d907685 100644
--- a/arch/mips/kernel/csrc-sb1250.c
+++ b/arch/mips/kernel/csrc-sb1250.c
@@ -65,6 +65,5 @@ void __init sb1250_clocksource_init(void)
IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM,
R_SCD_TIMER_CFG)));
- clocksource_set_clock(cs, V_SCD_TIMER_FREQ);
- clocksource_register(cs);
+ clocksource_register_hz(cs, V_SCD_TIMER_FREQ);
}
diff --git a/arch/mips/kernel/i8253.c b/arch/mips/kernel/i8253.c
index 2392a7a296d4..391221b6a6aa 100644
--- a/arch/mips/kernel/i8253.c
+++ b/arch/mips/kernel/i8253.c
@@ -125,87 +125,11 @@ void __init setup_pit_timer(void)
setup_irq(0, &irq0);
}
-/*
- * Since the PIT overflows every tick, its not very useful
- * to just read by itself. So use jiffies to emulate a free
- * running counter:
- */
-static cycle_t pit_read(struct clocksource *cs)
-{
- unsigned long flags;
- int count;
- u32 jifs;
- static int old_count;
- static u32 old_jifs;
-
- raw_spin_lock_irqsave(&i8253_lock, flags);
- /*
- * Although our caller may have the read side of xtime_lock,
- * this is now a seqlock, and we are cheating in this routine
- * by having side effects on state that we cannot undo if
- * there is a collision on the seqlock and our caller has to
- * retry. (Namely, old_jifs and old_count.) So we must treat
- * jiffies as volatile despite the lock. We read jiffies
- * before latching the timer count to guarantee that although
- * the jiffies value might be older than the count (that is,
- * the counter may underflow between the last point where
- * jiffies was incremented and the point where we latch the
- * count), it cannot be newer.
- */
- jifs = jiffies;
- outb_p(0x00, PIT_MODE); /* latch the count ASAP */
- count = inb_p(PIT_CH0); /* read the latched count */
- count |= inb_p(PIT_CH0) << 8;
-
- /* VIA686a test code... reset the latch if count > max + 1 */
- if (count > LATCH) {
- outb_p(0x34, PIT_MODE);
- outb_p(LATCH & 0xff, PIT_CH0);
- outb(LATCH >> 8, PIT_CH0);
- count = LATCH - 1;
- }
-
- /*
- * It's possible for count to appear to go the wrong way for a
- * couple of reasons:
- *
- * 1. The timer counter underflows, but we haven't handled the
- * resulting interrupt and incremented jiffies yet.
- * 2. Hardware problem with the timer, not giving us continuous time,
- * the counter does small "jumps" upwards on some Pentium systems,
- * (see c't 95/10 page 335 for Neptun bug.)
- *
- * Previous attempts to handle these cases intelligently were
- * buggy, so we just do the simple thing now.
- */
- if (count > old_count && jifs == old_jifs) {
- count = old_count;
- }
- old_count = count;
- old_jifs = jifs;
-
- raw_spin_unlock_irqrestore(&i8253_lock, flags);
-
- count = (LATCH - 1) - count;
-
- return (cycle_t)(jifs * LATCH) + count;
-}
-
-static struct clocksource clocksource_pit = {
- .name = "pit",
- .rating = 110,
- .read = pit_read,
- .mask = CLOCKSOURCE_MASK(32),
- .mult = 0,
- .shift = 20,
-};
-
static int __init init_pit_clocksource(void)
{
if (num_possible_cpus() > 1) /* PIT does not scale! */
return 0;
- clocksource_pit.mult = clocksource_hz2mult(CLOCK_TICK_RATE, 20);
- return clocksource_register(&clocksource_pit);
+ return clocksource_i8253_init();
}
arch_initcall(init_pit_clocksource);
diff --git a/arch/mips/loongson/common/cs5536/cs5536_mfgpt.c b/arch/mips/loongson/common/cs5536/cs5536_mfgpt.c
index 8c807c965199..0cb1b9760e34 100644
--- a/arch/mips/loongson/common/cs5536/cs5536_mfgpt.c
+++ b/arch/mips/loongson/common/cs5536/cs5536_mfgpt.c
@@ -201,8 +201,6 @@ static struct clocksource clocksource_mfgpt = {
.rating = 120, /* Functional for real use, but not desired */
.read = mfgpt_read,
.mask = CLOCKSOURCE_MASK(32),
- .mult = 0,
- .shift = 22,
};
int __init init_mfgpt_clocksource(void)
@@ -210,8 +208,7 @@ int __init init_mfgpt_clocksource(void)
if (num_possible_cpus() > 1) /* MFGPT does not scale! */
return 0;
- clocksource_mfgpt.mult = clocksource_hz2mult(MFGPT_TICK_RATE, 22);
- return clocksource_register(&clocksource_mfgpt);
+ return clocksource_register_hz(&clocksource_mfgpt, MFGPT_TICK_RATE);
}
arch_initcall(init_mfgpt_clocksource);
diff --git a/arch/mips/sgi-ip27/ip27-timer.c b/arch/mips/sgi-ip27/ip27-timer.c
index 3f810c9cbf83..ef74f3267f91 100644
--- a/arch/mips/sgi-ip27/ip27-timer.c
+++ b/arch/mips/sgi-ip27/ip27-timer.c
@@ -163,8 +163,7 @@ static void __init hub_rt_clocksource_init(void)
{
struct clocksource *cs = &hub_rt_clocksource;
- clocksource_set_clock(cs, CYCLES_PER_SEC);
- clocksource_register(cs);
+ clocksource_register_hz(cs, CYCLES_PER_SEC);
}
void __init plat_time_init(void)
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 650bb8c47eca..7a0ff52c73fa 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -8,6 +8,7 @@ config 64BIT
config X86_32
def_bool !64BIT
+ select CLKSRC_I8253
config X86_64
def_bool 64BIT
diff --git a/arch/x86/include/asm/i8253.h b/arch/x86/include/asm/i8253.h
index fc1f579fb965..65aaa91d5850 100644
--- a/arch/x86/include/asm/i8253.h
+++ b/arch/x86/include/asm/i8253.h
@@ -6,6 +6,8 @@
#define PIT_CH0 0x40
#define PIT_CH2 0x42
+#define PIT_LATCH LATCH
+
extern raw_spinlock_t i8253_lock;
extern struct clock_event_device *global_clock_event;
diff --git a/arch/x86/kernel/apb_timer.c b/arch/x86/kernel/apb_timer.c
index cd1ffed4ee22..289e92862fd9 100644
--- a/arch/x86/kernel/apb_timer.c
+++ b/arch/x86/kernel/apb_timer.c
@@ -177,7 +177,6 @@ static struct clocksource clocksource_apbt = {
.rating = APBT_CLOCKSOURCE_RATING,
.read = apbt_read_clocksource,
.mask = APBT_MASK,
- .shift = APBT_SHIFT,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
.resume = apbt_restart_clocksource,
};
@@ -543,14 +542,7 @@ static int apbt_clocksource_register(void)
if (t1 == apbt_read_clocksource(&clocksource_apbt))
panic("APBT counter not counting. APBT disabled\n");
- /*
- * initialize and register APBT clocksource
- * convert that to ns/clock cycle
- * mult = (ns/c) * 2^APBT_SHIFT
- */
- clocksource_apbt.mult = div_sc(MSEC_PER_SEC,
- (unsigned long) apbt_freq, APBT_SHIFT);
- clocksource_register(&clocksource_apbt);
+ clocksource_register_khz(&clocksource_apbt, (u32)apbt_freq*1000);
return 0;
}
diff --git a/arch/x86/kernel/i8253.c b/arch/x86/kernel/i8253.c
index 2dfd31597443..577e90cadaeb 100644
--- a/arch/x86/kernel/i8253.c
+++ b/arch/x86/kernel/i8253.c
@@ -117,81 +117,6 @@ void __init setup_pit_timer(void)
}
#ifndef CONFIG_X86_64
-/*
- * Since the PIT overflows every tick, its not very useful
- * to just read by itself. So use jiffies to emulate a free
- * running counter:
- */
-static cycle_t pit_read(struct clocksource *cs)
-{
- static int old_count;
- static u32 old_jifs;
- unsigned long flags;
- int count;
- u32 jifs;
-
- raw_spin_lock_irqsave(&i8253_lock, flags);
- /*
- * Although our caller may have the read side of xtime_lock,
- * this is now a seqlock, and we are cheating in this routine
- * by having side effects on state that we cannot undo if
- * there is a collision on the seqlock and our caller has to
- * retry. (Namely, old_jifs and old_count.) So we must treat
- * jiffies as volatile despite the lock. We read jiffies
- * before latching the timer count to guarantee that although
- * the jiffies value might be older than the count (that is,
- * the counter may underflow between the last point where
- * jiffies was incremented and the point where we latch the
- * count), it cannot be newer.
- */
- jifs = jiffies;
- outb_pit(0x00, PIT_MODE); /* latch the count ASAP */
- count = inb_pit(PIT_CH0); /* read the latched count */
- count |= inb_pit(PIT_CH0) << 8;
-
- /* VIA686a test code... reset the latch if count > max + 1 */
- if (count > LATCH) {
- outb_pit(0x34, PIT_MODE);
- outb_pit(LATCH & 0xff, PIT_CH0);
- outb_pit(LATCH >> 8, PIT_CH0);
- count = LATCH - 1;
- }
-
- /*
- * It's possible for count to appear to go the wrong way for a
- * couple of reasons:
- *
- * 1. The timer counter underflows, but we haven't handled the
- * resulting interrupt and incremented jiffies yet.
- * 2. Hardware problem with the timer, not giving us continuous time,
- * the counter does small "jumps" upwards on some Pentium systems,
- * (see c't 95/10 page 335 for Neptun bug.)
- *
- * Previous attempts to handle these cases intelligently were
- * buggy, so we just do the simple thing now.
- */
- if (count > old_count && jifs == old_jifs)
- count = old_count;
-
- old_count = count;
- old_jifs = jifs;
-
- raw_spin_unlock_irqrestore(&i8253_lock, flags);
-
- count = (LATCH - 1) - count;
-
- return (cycle_t)(jifs * LATCH) + count;
-}
-
-static struct clocksource pit_cs = {
- .name = "pit",
- .rating = 110,
- .read = pit_read,
- .mask = CLOCKSOURCE_MASK(32),
- .mult = 0,
- .shift = 20,
-};
-
static int __init init_pit_clocksource(void)
{
/*
@@ -205,10 +130,7 @@ static int __init init_pit_clocksource(void)
pit_ce.mode != CLOCK_EVT_MODE_PERIODIC)
return 0;
- pit_cs.mult = clocksource_hz2mult(CLOCK_TICK_RATE, pit_cs.shift);
-
- return clocksource_register(&pit_cs);
+ return clocksource_i8253_init();
}
arch_initcall(init_pit_clocksource);
-
#endif /* !CONFIG_X86_64 */
diff --git a/arch/x86/kernel/kvmclock.c b/arch/x86/kernel/kvmclock.c
index f98d3eafe07a..6389a6bca11b 100644
--- a/arch/x86/kernel/kvmclock.c
+++ b/arch/x86/kernel/kvmclock.c
@@ -26,8 +26,6 @@
#include <asm/x86_init.h>
#include <asm/reboot.h>
-#define KVM_SCALE 22
-
static int kvmclock = 1;
static int msr_kvm_system_time = MSR_KVM_SYSTEM_TIME;
static int msr_kvm_wall_clock = MSR_KVM_WALL_CLOCK;
@@ -120,8 +118,6 @@ static struct clocksource kvm_clock = {
.read = kvm_clock_get_cycles,
.rating = 400,
.mask = CLOCKSOURCE_MASK(64),
- .mult = 1 << KVM_SCALE,
- .shift = KVM_SCALE,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
@@ -203,7 +199,7 @@ void __init kvmclock_init(void)
machine_ops.crash_shutdown = kvm_crash_shutdown;
#endif
kvm_get_preset_lpj();
- clocksource_register(&kvm_clock);
+ clocksource_register_hz(&kvm_clock, NSEC_PER_SEC);
pv_info.paravirt_enabled = 1;
pv_info.name = "KVM";
diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c
index 395bf0114aad..e191c096ab90 100644
--- a/arch/x86/lguest/boot.c
+++ b/arch/x86/lguest/boot.c
@@ -913,8 +913,6 @@ static struct clocksource lguest_clock = {
.rating = 200,
.read = lguest_clock_read,
.mask = CLOCKSOURCE_MASK(64),
- .mult = 1 << 22,
- .shift = 22,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
@@ -997,7 +995,7 @@ static void lguest_time_init(void)
/* Set up the timer interrupt (0) to go to our simple timer routine */
irq_set_handler(0, lguest_time_irq);
- clocksource_register(&lguest_clock);
+ clocksource_register_hz(&lguest_clock, NSEC_PER_SEC);
/* We can't set cpumask in the initializer: damn C limitations! Set it
* here and register our timer device. */
diff --git a/arch/x86/platform/uv/uv_time.c b/arch/x86/platform/uv/uv_time.c
index 9daf5d1af9f1..0eb90184515f 100644
--- a/arch/x86/platform/uv/uv_time.c
+++ b/arch/x86/platform/uv/uv_time.c
@@ -40,7 +40,6 @@ static struct clocksource clocksource_uv = {
.rating = 400,
.read = uv_read_rtc,
.mask = (cycle_t)UVH_RTC_REAL_TIME_CLOCK_MASK,
- .shift = 10,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
@@ -372,14 +371,11 @@ static __init int uv_rtc_setup_clock(void)
if (!is_uv_system())
return -ENODEV;
- clocksource_uv.mult = clocksource_hz2mult(sn_rtc_cycles_per_second,
- clocksource_uv.shift);
-
/* If single blade, prefer tsc */
if (uv_num_possible_blades() == 1)
clocksource_uv.rating = 250;
- rc = clocksource_register(&clocksource_uv);
+ rc = clocksource_register_hz(&clocksource_uv, sn_rtc_cycles_per_second);
if (rc)
printk(KERN_INFO "UV RTC clocksource failed rc %d\n", rc);
else
diff --git a/arch/x86/xen/time.c b/arch/x86/xen/time.c
index bd4ffd7d9589..5158c505bef9 100644
--- a/arch/x86/xen/time.c
+++ b/arch/x86/xen/time.c
@@ -26,8 +26,6 @@
#include "xen-ops.h"
-#define XEN_SHIFT 22
-
/* Xen may fire a timer up to this many ns early */
#define TIMER_SLOP 100000
#define NS_PER_TICK (1000000000LL / HZ)
@@ -211,8 +209,6 @@ static struct clocksource xen_clocksource __read_mostly = {
.rating = 400,
.read = xen_clocksource_get_cycles,
.mask = ~0,
- .mult = 1<<XEN_SHIFT, /* time directly in nanoseconds */
- .shift = XEN_SHIFT,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
@@ -448,7 +444,7 @@ static void __init xen_time_init(void)
int cpu = smp_processor_id();
struct timespec tp;
- clocksource_register(&xen_clocksource);
+ clocksource_register_hz(&xen_clocksource, NSEC_PER_SEC);
if (HYPERVISOR_vcpu_op(VCPUOP_stop_periodic_timer, cpu, NULL) == 0) {
/* Successfully turned off 100Hz tick, so we have the
diff --git a/drivers/Kconfig b/drivers/Kconfig
index 177c7d156933..557a469c7aa6 100644
--- a/drivers/Kconfig
+++ b/drivers/Kconfig
@@ -119,4 +119,7 @@ source "drivers/platform/Kconfig"
source "drivers/clk/Kconfig"
source "drivers/hwspinlock/Kconfig"
+
+source "drivers/clocksource/Kconfig"
+
endmenu
diff --git a/drivers/char/hpet.c b/drivers/char/hpet.c
index 7066e801b9d3..051474c65b78 100644
--- a/drivers/char/hpet.c
+++ b/drivers/char/hpet.c
@@ -84,8 +84,6 @@ static struct clocksource clocksource_hpet = {
.rating = 250,
.read = read_hpet,
.mask = CLOCKSOURCE_MASK(64),
- .mult = 0, /* to be calculated */
- .shift = 10,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
static struct clocksource *hpet_clocksource;
@@ -934,9 +932,7 @@ int hpet_alloc(struct hpet_data *hdp)
if (!hpet_clocksource) {
hpet_mctr = (void __iomem *)&hpetp->hp_hpet->hpet_mc;
CLKSRC_FSYS_MMIO_SET(clocksource_hpet.fsys_mmio, hpet_mctr);
- clocksource_hpet.mult = clocksource_hz2mult(hpetp->hp_tick_freq,
- clocksource_hpet.shift);
- clocksource_register(&clocksource_hpet);
+ clocksource_register_hz(&clocksource_hpet, hpetp->hp_tick_freq);
hpetp->hp_clocksource = &clocksource_hpet;
hpet_clocksource = &clocksource_hpet;
}
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
new file mode 100644
index 000000000000..110aeeb52f9a
--- /dev/null
+++ b/drivers/clocksource/Kconfig
@@ -0,0 +1,2 @@
+config CLKSRC_I8253
+ bool
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index be61ece6330b..cfb6383b543a 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -6,3 +6,4 @@ obj-$(CONFIG_CS5535_CLOCK_EVENT_SRC) += cs5535-clockevt.o
obj-$(CONFIG_SH_TIMER_CMT) += sh_cmt.o
obj-$(CONFIG_SH_TIMER_MTU2) += sh_mtu2.o
obj-$(CONFIG_SH_TIMER_TMU) += sh_tmu.o
+obj-$(CONFIG_CLKSRC_I8253) += i8253.o
diff --git a/drivers/clocksource/cyclone.c b/drivers/clocksource/cyclone.c
index 64e528e8bfa6..72f811f73e9c 100644
--- a/drivers/clocksource/cyclone.c
+++ b/drivers/clocksource/cyclone.c
@@ -29,8 +29,6 @@ static struct clocksource clocksource_cyclone = {
.rating = 250,
.read = read_cyclone,
.mask = CYCLONE_TIMER_MASK,
- .mult = 10,
- .shift = 0,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
@@ -108,12 +106,8 @@ static int __init init_cyclone_clocksource(void)
}
cyclone_ptr = cyclone_timer;
- /* sort out mult/shift values: */
- clocksource_cyclone.shift = 22;
- clocksource_cyclone.mult = clocksource_hz2mult(CYCLONE_TIMER_FREQ,
- clocksource_cyclone.shift);
-
- return clocksource_register(&clocksource_cyclone);
+ return clocksource_register_hz(&clocksource_cyclone,
+ CYCLONE_TIMER_FREQ);
}
arch_initcall(init_cyclone_clocksource);
diff --git a/drivers/clocksource/i8253.c b/drivers/clocksource/i8253.c
new file mode 100644
index 000000000000..225c1761b372
--- /dev/null
+++ b/drivers/clocksource/i8253.c
@@ -0,0 +1,88 @@
+/*
+ * i8253 PIT clocksource
+ */
+#include <linux/clocksource.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/spinlock.h>
+#include <linux/timex.h>
+
+#include <asm/i8253.h>
+
+/*
+ * Since the PIT overflows every tick, its not very useful
+ * to just read by itself. So use jiffies to emulate a free
+ * running counter:
+ */
+static cycle_t i8253_read(struct clocksource *cs)
+{
+ static int old_count;
+ static u32 old_jifs;
+ unsigned long flags;
+ int count;
+ u32 jifs;
+
+ raw_spin_lock_irqsave(&i8253_lock, flags);
+ /*
+ * Although our caller may have the read side of xtime_lock,
+ * this is now a seqlock, and we are cheating in this routine
+ * by having side effects on state that we cannot undo if
+ * there is a collision on the seqlock and our caller has to
+ * retry. (Namely, old_jifs and old_count.) So we must treat
+ * jiffies as volatile despite the lock. We read jiffies
+ * before latching the timer count to guarantee that although
+ * the jiffies value might be older than the count (that is,
+ * the counter may underflow between the last point where
+ * jiffies was incremented and the point where we latch the
+ * count), it cannot be newer.
+ */
+ jifs = jiffies;
+ outb_pit(0x00, PIT_MODE); /* latch the count ASAP */
+ count = inb_pit(PIT_CH0); /* read the latched count */
+ count |= inb_pit(PIT_CH0) << 8;
+
+ /* VIA686a test code... reset the latch if count > max + 1 */
+ if (count > LATCH) {
+ outb_pit(0x34, PIT_MODE);
+ outb_pit(PIT_LATCH & 0xff, PIT_CH0);
+ outb_pit(PIT_LATCH >> 8, PIT_CH0);
+ count = PIT_LATCH - 1;
+ }
+
+ /*
+ * It's possible for count to appear to go the wrong way for a
+ * couple of reasons:
+ *
+ * 1. The timer counter underflows, but we haven't handled the
+ * resulting interrupt and incremented jiffies yet.
+ * 2. Hardware problem with the timer, not giving us continuous time,
+ * the counter does small "jumps" upwards on some Pentium systems,
+ * (see c't 95/10 page 335 for Neptun bug.)
+ *
+ * Previous attempts to handle these cases intelligently were
+ * buggy, so we just do the simple thing now.
+ */
+ if (count > old_count && jifs == old_jifs)
+ count = old_count;
+
+ old_count = count;
+ old_jifs = jifs;
+
+ raw_spin_unlock_irqrestore(&i8253_lock, flags);
+
+ count = (PIT_LATCH - 1) - count;
+
+ return (cycle_t)(jifs * PIT_LATCH) + count;
+}
+
+static struct clocksource i8253_cs = {
+ .name = "pit",
+ .rating = 110,
+ .read = i8253_read,
+ .mask = CLOCKSOURCE_MASK(32),
+};
+
+int __init clocksource_i8253_init(void)
+{
+ return clocksource_register_hz(&i8253_cs, PIT_TICK_RATE);
+}
diff --git a/include/linux/clocksource.h b/include/linux/clocksource.h
index c37b21ad5a3b..0fb0b7e79394 100644
--- a/include/linux/clocksource.h
+++ b/include/linux/clocksource.h
@@ -161,7 +161,7 @@ struct clocksource {
/*
* First part of structure is read mostly
*/
- char *name;
+ const char *name;
struct list_head list;
int rating;
cycle_t (*read)(struct clocksource *cs);
@@ -341,4 +341,6 @@ static inline void update_vsyscall_tz(void)
extern void timekeeping_notify(struct clocksource *clock);
+extern int clocksource_i8253_init(void);
+
#endif /* _LINUX_CLOCKSOURCE_H */