summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2016-05-26 09:36:10 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2016-05-26 09:36:10 -0700
commit0e77816e096c4ae27e98977fef56b6b9169f9017 (patch)
tree646a9459a6b3f67d1443145cad912cec19406a00
parentbfb764440d5bee109003295473a0b387bc799222 (diff)
parent265984b36ce82fec67957d452dd2b22e010611e4 (diff)
downloadlinux-0e77816e096c4ae27e98977fef56b6b9169f9017.tar.bz2
Merge tag 'mmc-v4.7-rc1' of git://git.linaro.org/people/ulf.hansson/mmc
Pull MMC fixes from Ulf Hansson: "Here are some mmc fixes intended for v4.7 rc1. They are based on a commit earlier in the merge window and have been tested in linux-next for a while. MMC core: - Prevent re-tuning while serving requests for RPMB partitions - Extend timeout for long read time quirk to support more eMMCs MMC host: - sdhci-acpi: Ensure connected devices are powered when probing - sdhci-pci|acpi: Remove unreliable MMC_CAP_BUS_WIDTH_TEST for Intel HWs - dw_mmc: Correct the assigning of max_blk_size - dw_mmc-rockchip: Allow RPMB partitions to be created - dw_mmc-rockchip: Set the drive phase properly" * tag 'mmc-v4.7-rc1' of git://git.linaro.org/people/ulf.hansson/mmc: mmc: sdhci-acpi: Remove MMC_CAP_BUS_WIDTH_TEST for Intel controllers mmc: sdhci-pci: Remove MMC_CAP_BUS_WIDTH_TEST for Intel controllers mmc: longer timeout for long read time quirk mmc: dw_mmc: rockchip: Set the drive phase properly mmc: dw_mmc: fix the wrong max_blk_size mmc: dw_mmc-rockchip: add MMC_CAP_CMD23 capabilities mmc: sdhci-acpi: Ensure connected devices are powered when probing ACPI / PM: Export acpi_device_fix_up_power() mmc: block: Pause re-tuning while switched to the RPMB partition mmc: block: Always switch back to main area after RPMB access mmc: core: Add a facility to "pause" re-tuning
-rw-r--r--drivers/acpi/device_pm.c1
-rw-r--r--drivers/mmc/card/block.c24
-rw-r--r--drivers/mmc/core/core.c4
-rw-r--r--drivers/mmc/core/host.c24
-rw-r--r--drivers/mmc/host/dw_mmc-rockchip.c72
-rw-r--r--drivers/mmc/host/dw_mmc.c6
-rw-r--r--drivers/mmc/host/sdhci-acpi.c13
-rw-r--r--drivers/mmc/host/sdhci-pci-core.c5
-rw-r--r--include/linux/mmc/host.h4
9 files changed, 133 insertions, 20 deletions
diff --git a/drivers/acpi/device_pm.c b/drivers/acpi/device_pm.c
index cd2c3d6d40e0..993fd31394c8 100644
--- a/drivers/acpi/device_pm.c
+++ b/drivers/acpi/device_pm.c
@@ -319,6 +319,7 @@ int acpi_device_fix_up_power(struct acpi_device *device)
return ret;
}
+EXPORT_SYMBOL_GPL(acpi_device_fix_up_power);
int acpi_device_update_power(struct acpi_device *device, int *state_p)
{
diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c
index ddc96206288a..e62fde3ac431 100644
--- a/drivers/mmc/card/block.c
+++ b/drivers/mmc/card/block.c
@@ -618,6 +618,10 @@ static int mmc_blk_ioctl_cmd(struct block_device *bdev,
ioc_err = __mmc_blk_ioctl_cmd(card, md, idata);
+ /* Always switch back to main area after RPMB access */
+ if (md->area_type & MMC_BLK_DATA_AREA_RPMB)
+ mmc_blk_part_switch(card, dev_get_drvdata(&card->dev));
+
mmc_put_card(card);
err = mmc_blk_ioctl_copy_to_user(ic_ptr, idata);
@@ -685,6 +689,10 @@ static int mmc_blk_ioctl_multi_cmd(struct block_device *bdev,
for (i = 0; i < num_of_cmds && !ioc_err; i++)
ioc_err = __mmc_blk_ioctl_cmd(card, md, idata[i]);
+ /* Always switch back to main area after RPMB access */
+ if (md->area_type & MMC_BLK_DATA_AREA_RPMB)
+ mmc_blk_part_switch(card, dev_get_drvdata(&card->dev));
+
mmc_put_card(card);
/* copy to user if data and response */
@@ -748,16 +756,25 @@ static inline int mmc_blk_part_switch(struct mmc_card *card,
if (mmc_card_mmc(card)) {
u8 part_config = card->ext_csd.part_config;
+ if (md->part_type == EXT_CSD_PART_CONFIG_ACC_RPMB)
+ mmc_retune_pause(card->host);
+
part_config &= ~EXT_CSD_PART_CONFIG_ACC_MASK;
part_config |= md->part_type;
ret = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
EXT_CSD_PART_CONFIG, part_config,
card->ext_csd.part_time);
- if (ret)
+ if (ret) {
+ if (md->part_type == EXT_CSD_PART_CONFIG_ACC_RPMB)
+ mmc_retune_unpause(card->host);
return ret;
+ }
card->ext_csd.part_config = part_config;
+
+ if (main_md->part_curr == EXT_CSD_PART_CONFIG_ACC_RPMB)
+ mmc_retune_unpause(card->host);
}
main_md->part_curr = md->part_type;
@@ -2519,11 +2536,12 @@ static const struct mmc_fixup blk_fixups[] =
MMC_QUIRK_BLK_NO_CMD23),
/*
- * Some Micron MMC cards needs longer data read timeout than
- * indicated in CSD.
+ * Some MMC cards need longer data read timeout than indicated in CSD.
*/
MMC_FIXUP(CID_NAME_ANY, CID_MANFID_MICRON, 0x200, add_quirk_mmc,
MMC_QUIRK_LONG_READ_TIME),
+ MMC_FIXUP("008GE0", CID_MANFID_TOSHIBA, CID_OEMID_ANY, add_quirk_mmc,
+ MMC_QUIRK_LONG_READ_TIME),
/*
* On these Samsung MoviNAND parts, performing secure erase or
diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index 99275e40bf2f..8b4dfd45433b 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -875,11 +875,11 @@ void mmc_set_data_timeout(struct mmc_data *data, const struct mmc_card *card)
/*
* Some cards require longer data read timeout than indicated in CSD.
* Address this by setting the read timeout to a "reasonably high"
- * value. For the cards tested, 300ms has proven enough. If necessary,
+ * value. For the cards tested, 600ms has proven enough. If necessary,
* this value can be increased if other problematic cards require this.
*/
if (mmc_card_long_read_time(card) && data->flags & MMC_DATA_READ) {
- data->timeout_ns = 300000000;
+ data->timeout_ns = 600000000;
data->timeout_clks = 0;
}
diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c
index e0a3ee16c0d3..1be42fab1a30 100644
--- a/drivers/mmc/core/host.c
+++ b/drivers/mmc/core/host.c
@@ -68,8 +68,32 @@ void mmc_retune_enable(struct mmc_host *host)
jiffies + host->retune_period * HZ);
}
+/*
+ * Pause re-tuning for a small set of operations. The pause begins after the
+ * next command and after first doing re-tuning.
+ */
+void mmc_retune_pause(struct mmc_host *host)
+{
+ if (!host->retune_paused) {
+ host->retune_paused = 1;
+ mmc_retune_needed(host);
+ mmc_retune_hold(host);
+ }
+}
+EXPORT_SYMBOL(mmc_retune_pause);
+
+void mmc_retune_unpause(struct mmc_host *host)
+{
+ if (host->retune_paused) {
+ host->retune_paused = 0;
+ mmc_retune_release(host);
+ }
+}
+EXPORT_SYMBOL(mmc_retune_unpause);
+
void mmc_retune_disable(struct mmc_host *host)
{
+ mmc_retune_unpause(host);
host->can_retune = 0;
del_timer_sync(&host->retune_timer);
host->retune_now = 0;
diff --git a/drivers/mmc/host/dw_mmc-rockchip.c b/drivers/mmc/host/dw_mmc-rockchip.c
index 8c20b81cafd8..358b0dc853b0 100644
--- a/drivers/mmc/host/dw_mmc-rockchip.c
+++ b/drivers/mmc/host/dw_mmc-rockchip.c
@@ -66,6 +66,70 @@ static void dw_mci_rk3288_set_ios(struct dw_mci *host, struct mmc_ios *ios)
/* Make sure we use phases which we can enumerate with */
if (!IS_ERR(priv->sample_clk))
clk_set_phase(priv->sample_clk, priv->default_sample_phase);
+
+ /*
+ * Set the drive phase offset based on speed mode to achieve hold times.
+ *
+ * NOTE: this is _not_ a value that is dynamically tuned and is also
+ * _not_ a value that will vary from board to board. It is a value
+ * that could vary between different SoC models if they had massively
+ * different output clock delays inside their dw_mmc IP block (delay_o),
+ * but since it's OK to overshoot a little we don't need to do complex
+ * calculations and can pick values that will just work for everyone.
+ *
+ * When picking values we'll stick with picking 0/90/180/270 since
+ * those can be made very accurately on all known Rockchip SoCs.
+ *
+ * Note that these values match values from the DesignWare Databook
+ * tables for the most part except for SDR12 and "ID mode". For those
+ * two modes the databook calculations assume a clock in of 50MHz. As
+ * seen above, we always use a clock in rate that is exactly the
+ * card's input clock (times RK3288_CLKGEN_DIV, but that gets divided
+ * back out before the controller sees it).
+ *
+ * From measurement of a single device, it appears that delay_o is
+ * about .5 ns. Since we try to leave a bit of margin, it's expected
+ * that numbers here will be fine even with much larger delay_o
+ * (the 1.4 ns assumed by the DesignWare Databook would result in the
+ * same results, for instance).
+ */
+ if (!IS_ERR(priv->drv_clk)) {
+ int phase;
+
+ /*
+ * In almost all cases a 90 degree phase offset will provide
+ * sufficient hold times across all valid input clock rates
+ * assuming delay_o is not absurd for a given SoC. We'll use
+ * that as a default.
+ */
+ phase = 90;
+
+ switch (ios->timing) {
+ case MMC_TIMING_MMC_DDR52:
+ /*
+ * Since clock in rate with MMC_DDR52 is doubled when
+ * bus width is 8 we need to double the phase offset
+ * to get the same timings.
+ */
+ if (ios->bus_width == MMC_BUS_WIDTH_8)
+ phase = 180;
+ break;
+ case MMC_TIMING_UHS_SDR104:
+ case MMC_TIMING_MMC_HS200:
+ /*
+ * In the case of 150 MHz clock (typical max for
+ * Rockchip SoCs), 90 degree offset will add a delay
+ * of 1.67 ns. That will meet min hold time of .8 ns
+ * as long as clock output delay is < .87 ns. On
+ * SoCs measured this seems to be OK, but it doesn't
+ * hurt to give margin here, so we use 180.
+ */
+ phase = 180;
+ break;
+ }
+
+ clk_set_phase(priv->drv_clk, phase);
+ }
}
#define NUM_PHASES 360
@@ -233,10 +297,10 @@ static int dw_mci_rockchip_init(struct dw_mci *host)
/* Common capabilities of RK3288 SoC */
static unsigned long dw_mci_rk3288_dwmmc_caps[4] = {
- MMC_CAP_ERASE,
- MMC_CAP_ERASE,
- MMC_CAP_ERASE,
- MMC_CAP_ERASE,
+ MMC_CAP_ERASE | MMC_CAP_CMD23,
+ MMC_CAP_ERASE | MMC_CAP_CMD23,
+ MMC_CAP_ERASE | MMC_CAP_CMD23,
+ MMC_CAP_ERASE | MMC_CAP_CMD23,
};
static const struct dw_mci_drv_data rk2928_drv_data = {
diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
index 9dd1bd358434..829a6eebcdce 100644
--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c
@@ -2595,13 +2595,13 @@ static int dw_mci_init_slot(struct dw_mci *host, unsigned int id)
/* Useful defaults if platform data is unset. */
if (host->use_dma == TRANS_MODE_IDMAC) {
mmc->max_segs = host->ring_size;
- mmc->max_blk_size = 65536;
+ mmc->max_blk_size = 65535;
mmc->max_seg_size = 0x1000;
mmc->max_req_size = mmc->max_seg_size * host->ring_size;
mmc->max_blk_count = mmc->max_req_size / 512;
} else if (host->use_dma == TRANS_MODE_EDMAC) {
mmc->max_segs = 64;
- mmc->max_blk_size = 65536;
+ mmc->max_blk_size = 65535;
mmc->max_blk_count = 65535;
mmc->max_req_size =
mmc->max_blk_size * mmc->max_blk_count;
@@ -2609,7 +2609,7 @@ static int dw_mci_init_slot(struct dw_mci *host, unsigned int id)
} else {
/* TRANS_MODE_PIO */
mmc->max_segs = 64;
- mmc->max_blk_size = 65536; /* BLKSIZ is 16 bits */
+ mmc->max_blk_size = 65535; /* BLKSIZ is 16 bits */
mmc->max_blk_count = 512;
mmc->max_req_size = mmc->max_blk_size *
mmc->max_blk_count;
diff --git a/drivers/mmc/host/sdhci-acpi.c b/drivers/mmc/host/sdhci-acpi.c
index b2d70ba6caa7..458ffb7637e5 100644
--- a/drivers/mmc/host/sdhci-acpi.c
+++ b/drivers/mmc/host/sdhci-acpi.c
@@ -274,7 +274,7 @@ static const struct sdhci_acpi_slot sdhci_acpi_slot_int_emmc = {
.chip = &sdhci_acpi_chip_int,
.caps = MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE |
MMC_CAP_HW_RESET | MMC_CAP_1_8V_DDR |
- MMC_CAP_BUS_WIDTH_TEST | MMC_CAP_WAIT_WHILE_BUSY,
+ MMC_CAP_WAIT_WHILE_BUSY,
.caps2 = MMC_CAP2_HC_ERASE_SZ,
.flags = SDHCI_ACPI_RUNTIME_PM,
.quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
@@ -289,7 +289,7 @@ static const struct sdhci_acpi_slot sdhci_acpi_slot_int_sdio = {
SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
.quirks2 = SDHCI_QUIRK2_HOST_OFF_CARD_ON,
.caps = MMC_CAP_NONREMOVABLE | MMC_CAP_POWER_OFF_CARD |
- MMC_CAP_BUS_WIDTH_TEST | MMC_CAP_WAIT_WHILE_BUSY,
+ MMC_CAP_WAIT_WHILE_BUSY,
.flags = SDHCI_ACPI_RUNTIME_PM,
.pm_caps = MMC_PM_KEEP_POWER,
.probe_slot = sdhci_acpi_sdio_probe_slot,
@@ -301,7 +301,7 @@ static const struct sdhci_acpi_slot sdhci_acpi_slot_int_sd = {
.quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
.quirks2 = SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON |
SDHCI_QUIRK2_STOP_WITH_TC,
- .caps = MMC_CAP_BUS_WIDTH_TEST | MMC_CAP_WAIT_WHILE_BUSY,
+ .caps = MMC_CAP_WAIT_WHILE_BUSY,
.probe_slot = sdhci_acpi_sd_probe_slot,
};
@@ -378,7 +378,7 @@ static int sdhci_acpi_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
acpi_handle handle = ACPI_HANDLE(dev);
- struct acpi_device *device;
+ struct acpi_device *device, *child;
struct sdhci_acpi_host *c;
struct sdhci_host *host;
struct resource *iomem;
@@ -390,6 +390,11 @@ static int sdhci_acpi_probe(struct platform_device *pdev)
if (acpi_bus_get_device(handle, &device))
return -ENODEV;
+ /* Power on the SDHCI controller and its children */
+ acpi_device_fix_up_power(device);
+ list_for_each_entry(child, &device->children, node)
+ acpi_device_fix_up_power(child);
+
if (acpi_bus_get_status(device) || !device->status.present)
return -ENODEV;
diff --git a/drivers/mmc/host/sdhci-pci-core.c b/drivers/mmc/host/sdhci-pci-core.c
index 97d4eebd6bf5..a4dbf7421edc 100644
--- a/drivers/mmc/host/sdhci-pci-core.c
+++ b/drivers/mmc/host/sdhci-pci-core.c
@@ -356,7 +356,6 @@ static int byt_emmc_probe_slot(struct sdhci_pci_slot *slot)
{
slot->host->mmc->caps |= MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE |
MMC_CAP_HW_RESET | MMC_CAP_1_8V_DDR |
- MMC_CAP_BUS_WIDTH_TEST |
MMC_CAP_WAIT_WHILE_BUSY;
slot->host->mmc->caps2 |= MMC_CAP2_HC_ERASE_SZ;
slot->hw_reset = sdhci_pci_int_hw_reset;
@@ -372,15 +371,13 @@ static int byt_emmc_probe_slot(struct sdhci_pci_slot *slot)
static int byt_sdio_probe_slot(struct sdhci_pci_slot *slot)
{
slot->host->mmc->caps |= MMC_CAP_POWER_OFF_CARD | MMC_CAP_NONREMOVABLE |
- MMC_CAP_BUS_WIDTH_TEST |
MMC_CAP_WAIT_WHILE_BUSY;
return 0;
}
static int byt_sd_probe_slot(struct sdhci_pci_slot *slot)
{
- slot->host->mmc->caps |= MMC_CAP_BUS_WIDTH_TEST |
- MMC_CAP_WAIT_WHILE_BUSY;
+ slot->host->mmc->caps |= MMC_CAP_WAIT_WHILE_BUSY;
slot->cd_con_id = NULL;
slot->cd_idx = 0;
slot->cd_override_level = true;
diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
index 85800b48241f..45cde8cd39f2 100644
--- a/include/linux/mmc/host.h
+++ b/include/linux/mmc/host.h
@@ -329,6 +329,7 @@ struct mmc_host {
unsigned int can_retune:1; /* re-tuning can be used */
unsigned int doing_retune:1; /* re-tuning in progress */
unsigned int retune_now:1; /* do re-tuning at next req */
+ unsigned int retune_paused:1; /* re-tuning is temporarily disabled */
int rescan_disable; /* disable card detection */
int rescan_entered; /* used with nonremovable devices */
@@ -526,4 +527,7 @@ static inline void mmc_retune_recheck(struct mmc_host *host)
host->retune_now = 1;
}
+void mmc_retune_pause(struct mmc_host *host);
+void mmc_retune_unpause(struct mmc_host *host);
+
#endif /* LINUX_MMC_HOST_H */