diff options
author | Florian Fainelli <florian@openwrt.org> | 2012-02-29 14:00:13 +0100 |
---|---|---|
committer | John W. Linville <linville@tuxdriver.com> | 2012-02-29 14:11:32 -0500 |
commit | 02f1434d4ed8197cefde6f6c4a8b2f502144cbb5 (patch) | |
tree | a27ab84e414715159b44b475d383d5f177130a2b | |
parent | 659373d5152705b83283860364bfd4e2b1422f7a (diff) | |
download | linux-02f1434d4ed8197cefde6f6c4a8b2f502144cbb5.tar.bz2 |
zd1211rw: wait between setting hash table and powering radio on
I am running Debian testing kernel 3.1.0-1-amd64, using a 079b:0062 Sagem
XG-76NA 802.11bg stick.
Upon zd1211rw interface
bringup (ifconfig wlan0 up) I get the following timeout:
[ 950.330573] zd1211rw 1-3:1.0: phy2
[ 955.108510] zd1211rw 1-3:1.0: firmware version 4725
[ 955.148532] zd1211rw 1-3:1.0: zd1211b chip 079b:0062 v4810 high 00-19-70
AL2230_RF pa0 g--NS
[snip]
[ 955.204072] zd1211rw 1-3:1.0: error ioread32(CR_REG1): -110
A second ifconfig wlan0 up brings the interface up without problems.
After a bit more debugging, the call trace is the following:
[10241.028130] zd1211rw 1-3:1.0: zd_chip_lock_phy_regs: error
ioread32(CR_REG1): -110
[10241.028140] zd1211rw 1-3:1.0: zd_switch_radio_on: failed to lock PHY regs
[10241.028148] zd1211rw 1-3:1.0: zd_op_start: failed to set radio on
Adding a 10 milliseconds delay between the call to set_mc_hash() and
zd_chip_switch_radio_on() allows successful interface bringups in all
cases and matches what the vendor driver did.
Acked-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
-rw-r--r-- | drivers/net/wireless/zd1211rw/zd_mac.c | 12 |
1 files changed, 11 insertions, 1 deletions
diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c index 98a574a4a465..9fcde36d5013 100644 --- a/drivers/net/wireless/zd1211rw/zd_mac.c +++ b/drivers/net/wireless/zd1211rw/zd_mac.c @@ -306,9 +306,19 @@ int zd_op_start(struct ieee80211_hw *hw) r = set_mc_hash(mac); if (r) goto disable_int; + + /* Wait after setting the multicast hash table and powering on + * the radio otherwise interface bring up will fail. This matches + * what the vendor driver did. + */ + msleep(10); + r = zd_chip_switch_radio_on(chip); - if (r < 0) + if (r < 0) { + dev_err(zd_chip_dev(chip), + "%s: failed to set radio on\n", __func__); goto disable_int; + } r = zd_chip_enable_rxtx(chip); if (r < 0) goto disable_radio; |