summaryrefslogtreecommitdiffstats
path: root/drivers/tty/serial/etraxfs-uart.c
blob: a57301a6fe427027788aa2153547928597c71ed1 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
986
987
988
989
990
991
992
993
994
995
996
#include <linux/module.h>
#include <linux/init.h>
#include <linux/console.h>
#include <linux/platform_device.h>
#include <linux/serial_core.h>
#include <linux/tty_flip.h>
#include <linux/of.h>
#include <linux/gpio.h>
#include <linux/of_irq.h>
#include <linux/of_address.h>
#include <hwregs/ser_defs.h>

#define DRV_NAME "etraxfs-uart"
#define UART_NR CONFIG_ETRAX_SERIAL_PORTS

#define MODIFY_REG(instance, reg, var)				\
	do {							\
		if (REG_RD_INT(ser, instance, reg) !=		\
		    REG_TYPE_CONV(int, reg_ser_##reg, var))	\
			REG_WR(ser, instance, reg, var);	\
	} while (0)

struct uart_cris_port {
	struct uart_port port;

	int initialized;
	int irq;

	void __iomem *regi_ser;

	struct gpio_desc *dtr_pin;
	struct gpio_desc *dsr_pin;
	struct gpio_desc *ri_pin;
	struct gpio_desc *cd_pin;

	int write_ongoing;
};

static struct uart_driver etraxfs_uart_driver;
static struct uart_port *console_port;
static int console_baud = 115200;
static struct uart_cris_port *etraxfs_uart_ports[UART_NR];

static void cris_serial_port_init(struct uart_port *port, int line);
static void etraxfs_uart_stop_rx(struct uart_port *port);
static inline void etraxfs_uart_start_tx_bottom(struct uart_port *port);

#ifdef CONFIG_SERIAL_ETRAXFS_CONSOLE
static void
cris_console_write(struct console *co, const char *s, unsigned int count)
{
	struct uart_cris_port *up;
	int i;
	reg_ser_r_stat_din stat;
	reg_ser_rw_tr_dma_en tr_dma_en, old;

	up = etraxfs_uart_ports[co->index];

	if (!up)
		return;

	/* Switch to manual mode. */
	tr_dma_en = old = REG_RD(ser, up->regi_ser, rw_tr_dma_en);
	if (tr_dma_en.en == regk_ser_yes) {
		tr_dma_en.en = regk_ser_no;
		REG_WR(ser, up->regi_ser, rw_tr_dma_en, tr_dma_en);
	}

	/* Send data. */
	for (i = 0; i < count; i++) {
		/* LF -> CRLF */
		if (s[i] == '\n') {
			do {
				stat = REG_RD(ser, up->regi_ser, r_stat_din);
			} while (!stat.tr_rdy);
			REG_WR_INT(ser, up->regi_ser, rw_dout, '\r');
		}
		/* Wait until transmitter is ready and send. */
		do {
			stat = REG_RD(ser, up->regi_ser, r_stat_din);
		} while (!stat.tr_rdy);
		REG_WR_INT(ser, up->regi_ser, rw_dout, s[i]);
	}

	/* Restore mode. */
	if (tr_dma_en.en != old.en)
		REG_WR(ser, up->regi_ser, rw_tr_dma_en, old);
}

static int __init
cris_console_setup(struct console *co, char *options)
{
	struct uart_port *port;
	int baud = 115200;
	int bits = 8;
	int parity = 'n';
	int flow = 'n';

	if (co->index < 0 || co->index >= UART_NR)
		co->index = 0;
	port = &etraxfs_uart_ports[co->index]->port;
	console_port = port;

	co->flags |= CON_CONSDEV;

	if (options)
		uart_parse_options(options, &baud, &parity, &bits, &flow);
	console_baud = baud;
	cris_serial_port_init(port, co->index);
	uart_set_options(port, co, baud, parity, bits, flow);

	return 0;
}

static struct tty_driver *cris_console_device(struct console *co, int *index)
{
	struct uart_driver *p = co->data;
	*index = co->index;
	return p->tty_driver;
}

static struct console cris_console = {
	.name = "ttyS",
	.write = cris_console_write,
	.device = cris_console_device,
	.setup = cris_console_setup,
	.flags = CON_PRINTBUFFER,
	.index = -1,
	.data = &etraxfs_uart_driver,
};
#endif /* CONFIG_SERIAL_ETRAXFS_CONSOLE */

static struct uart_driver etraxfs_uart_driver = {
	.owner = THIS_MODULE,
	.driver_name = "serial",
	.dev_name = "ttyS",
	.major = TTY_MAJOR,
	.minor = 64,
	.nr = UART_NR,
#ifdef CONFIG_SERIAL_ETRAXFS_CONSOLE
	.cons = &cris_console,
#endif /* CONFIG_SERIAL_ETRAXFS_CONSOLE */
};

static inline int crisv32_serial_get_rts(struct uart_cris_port *up)
{
	void __iomem *regi_ser = up->regi_ser;
	/*
	 * Return what the user has controlled rts to or
	 * what the pin is? (if auto_rts is used it differs during tx)
	 */
	reg_ser_r_stat_din rstat = REG_RD(ser, regi_ser, r_stat_din);

	return !(rstat.rts_n == regk_ser_active);
}

/*
 * A set = 0 means 3.3V on the pin, bitvalue: 0=active, 1=inactive
 *                                            0=0V    , 1=3.3V
 */
static inline void crisv32_serial_set_rts(struct uart_cris_port *up,
					  int set, int force)
{
	void __iomem *regi_ser = up->regi_ser;

	unsigned long flags;
	reg_ser_rw_rec_ctrl rec_ctrl;

	local_irq_save(flags);
	rec_ctrl = REG_RD(ser, regi_ser, rw_rec_ctrl);

	if (set)
		rec_ctrl.rts_n = regk_ser_active;
	else
		rec_ctrl.rts_n = regk_ser_inactive;
	REG_WR(ser, regi_ser, rw_rec_ctrl, rec_ctrl);
	local_irq_restore(flags);
}

static inline int crisv32_serial_get_cts(struct uart_cris_port *up)
{
	void __iomem *regi_ser = up->regi_ser;
	reg_ser_r_stat_din rstat = REG_RD(ser, regi_ser, r_stat_din);

	return (rstat.cts_n == regk_ser_active);
}

/*
 * Send a single character for XON/XOFF purposes.  We do it in this separate
 * function instead of the alternative support port.x_char, in the ...start_tx
 * function, so we don't mix up this case with possibly enabling transmission
 * of queued-up data (in case that's disabled after *receiving* an XOFF or
 * negative CTS).  This function is used for both DMA and non-DMA case; see HW
 * docs specifically blessing sending characters manually when DMA for
 * transmission is enabled and running.  We may be asked to transmit despite
 * the transmitter being disabled by a ..._stop_tx call so we need to enable
 * it temporarily but restore the state afterwards.
 */
static void etraxfs_uart_send_xchar(struct uart_port *port, char ch)
{
	struct uart_cris_port *up = (struct uart_cris_port *)port;
	reg_ser_rw_dout dout = { .data = ch };
	reg_ser_rw_ack_intr ack_intr = { .tr_rdy = regk_ser_yes };
	reg_ser_r_stat_din rstat;
	reg_ser_rw_tr_ctrl prev_tr_ctrl, tr_ctrl;
	void __iomem *regi_ser = up->regi_ser;
	unsigned long flags;

	/*
	 * Wait for tr_rdy in case a character is already being output.  Make
	 * sure we have integrity between the register reads and the writes
	 * below, but don't busy-wait with interrupts off and the port lock
	 * taken.
	 */
	spin_lock_irqsave(&port->lock, flags);
	do {
		spin_unlock_irqrestore(&port->lock, flags);
		spin_lock_irqsave(&port->lock, flags);
		prev_tr_ctrl = tr_ctrl = REG_RD(ser, regi_ser, rw_tr_ctrl);
		rstat = REG_RD(ser, regi_ser, r_stat_din);
	} while (!rstat.tr_rdy);

	/*
	 * Ack an interrupt if one was just issued for the previous character
	 * that was output.  This is required for non-DMA as the interrupt is
	 * used as the only indicator that the transmitter is ready and it
	 * isn't while this x_char is being transmitted.
	 */
	REG_WR(ser, regi_ser, rw_ack_intr, ack_intr);

	/* Enable the transmitter in case it was disabled. */
	tr_ctrl.stop = 0;
	REG_WR(ser, regi_ser, rw_tr_ctrl, tr_ctrl);

	/*
	 * Finally, send the blessed character; nothing should stop it now,
	 * except for an xoff-detected state, which we'll handle below.
	 */
	REG_WR(ser, regi_ser, rw_dout, dout);
	up->port.icount.tx++;

	/* There might be an xoff state to clear. */
	rstat = REG_RD(ser, up->regi_ser, r_stat_din);

	/*
	 * Clear any xoff state that *may* have been there to
	 * inhibit transmission of the character.
	 */
	if (rstat.xoff_detect) {
		reg_ser_rw_xoff_clr xoff_clr = { .clr = 1 };
		reg_ser_rw_tr_dma_en tr_dma_en;

		REG_WR(ser, regi_ser, rw_xoff_clr, xoff_clr);
		tr_dma_en = REG_RD(ser, regi_ser, rw_tr_dma_en);

		/*
		 * If we had an xoff state but cleared it, instead sneak in a
		 * disabled state for the transmitter, after the character we
		 * sent.  Thus we keep the port disabled, just as if the xoff
		 * state was still in effect (or actually, as if stop_tx had
		 * been called, as we stop DMA too).
		 */
		prev_tr_ctrl.stop = 1;

		tr_dma_en.en = 0;
		REG_WR(ser, regi_ser, rw_tr_dma_en, tr_dma_en);
	}

	/* Restore "previous" enabled/disabled state of the transmitter. */
	REG_WR(ser, regi_ser, rw_tr_ctrl, prev_tr_ctrl);

	spin_unlock_irqrestore(&port->lock, flags);
}

/*
 * Do not spin_lock_irqsave or disable interrupts by other means here; it's
 * already done by the caller.
 */
static void etraxfs_uart_start_tx(struct uart_port *port)
{
	struct uart_cris_port *up = (struct uart_cris_port *)port;

	/* we have already done below if a write is ongoing */
	if (up->write_ongoing)
		return;

	/* Signal that write is ongoing */
	up->write_ongoing = 1;

	etraxfs_uart_start_tx_bottom(port);
}

static inline void etraxfs_uart_start_tx_bottom(struct uart_port *port)
{
	struct uart_cris_port *up = (struct uart_cris_port *)port;
	void __iomem *regi_ser = up->regi_ser;
	reg_ser_rw_tr_ctrl tr_ctrl;
	reg_ser_rw_intr_mask intr_mask;

	tr_ctrl = REG_RD(ser, regi_ser, rw_tr_ctrl);
	tr_ctrl.stop = regk_ser_no;
	REG_WR(ser, regi_ser, rw_tr_ctrl, tr_ctrl);
	intr_mask = REG_RD(ser, regi_ser, rw_intr_mask);
	intr_mask.tr_rdy = regk_ser_yes;
	REG_WR(ser, regi_ser, rw_intr_mask, intr_mask);
}

/*
 * This function handles both the DMA and non-DMA case by ordering the
 * transmitter to stop of after the current character.  We don't need to wait
 * for any such character to be completely transmitted; we do that where it
 * matters, like in etraxfs_uart_set_termios.  Don't busy-wait here; see
 * Documentation/serial/driver: this function is called within
 * spin_lock_irq{,save} and thus separate ones would be disastrous (when SMP).
 * There's no documented need to set the txd pin to any particular value;
 * break setting is controlled solely by etraxfs_uart_break_ctl.
 */
static void etraxfs_uart_stop_tx(struct uart_port *port)
{
	struct uart_cris_port *up = (struct uart_cris_port *)port;
	void __iomem *regi_ser = up->regi_ser;
	reg_ser_rw_tr_ctrl tr_ctrl;
	reg_ser_rw_intr_mask intr_mask;
	reg_ser_rw_tr_dma_en tr_dma_en = {0};
	reg_ser_rw_xoff_clr xoff_clr = {0};

	/*
	 * For the non-DMA case, we'd get a tr_rdy interrupt that we're not
	 * interested in as we're not transmitting any characters.  For the
	 * DMA case, that interrupt is already turned off, but no reason to
	 * waste code on conditionals here.
	 */
	intr_mask = REG_RD(ser, regi_ser, rw_intr_mask);
	intr_mask.tr_rdy = regk_ser_no;
	REG_WR(ser, regi_ser, rw_intr_mask, intr_mask);

	tr_ctrl = REG_RD(ser, regi_ser, rw_tr_ctrl);
	tr_ctrl.stop = 1;
	REG_WR(ser, regi_ser, rw_tr_ctrl, tr_ctrl);

	/*
	 * Always clear possible hardware xoff-detected state here, no need to
	 * unnecessary consider mctrl settings and when they change.  We clear
	 * it here rather than in start_tx: both functions are called as the
	 * effect of XOFF processing, but start_tx is also called when upper
	 * levels tell the driver that there are more characters to send, so
	 * avoid adding code there.
	 */
	xoff_clr.clr = 1;
	REG_WR(ser, regi_ser, rw_xoff_clr, xoff_clr);

	/*
	 * Disable transmitter DMA, so that if we're in XON/XOFF, we can send
	 * those single characters without also giving go-ahead for queued up
	 * DMA data.
	 */
	tr_dma_en.en = 0;
	REG_WR(ser, regi_ser, rw_tr_dma_en, tr_dma_en);

	/*
	 * Make sure that write_ongoing is reset when stopping tx.
	 */
	up->write_ongoing = 0;
}

static void etraxfs_uart_stop_rx(struct uart_port *port)
{
	struct uart_cris_port *up = (struct uart_cris_port *)port;
	void __iomem *regi_ser = up->regi_ser;
	reg_ser_rw_rec_ctrl rec_ctrl = REG_RD(ser, regi_ser, rw_rec_ctrl);

	rec_ctrl.en = regk_ser_no;
	REG_WR(ser, regi_ser, rw_rec_ctrl, rec_ctrl);
}

static void etraxfs_uart_enable_ms(struct uart_port *port)
{
}

static void check_modem_status(struct uart_cris_port *up)
{
}

static unsigned int etraxfs_uart_tx_empty(struct uart_port *port)
{
	struct uart_cris_port *up = (struct uart_cris_port *)port;
	unsigned long flags;
	unsigned int ret;
	reg_ser_r_stat_din rstat = {0};

	spin_lock_irqsave(&up->port.lock, flags);

	rstat = REG_RD(ser, up->regi_ser, r_stat_din);
	ret = rstat.tr_empty ? TIOCSER_TEMT : 0;

	spin_unlock_irqrestore(&up->port.lock, flags);
	return ret;
}
static unsigned int etraxfs_uart_get_mctrl(struct uart_port *port)
{
	struct uart_cris_port *up = (struct uart_cris_port *)port;
	unsigned int ret;

	ret = 0;
	if (crisv32_serial_get_rts(up))
		ret |= TIOCM_RTS;
	/* DTR is active low */
	if (up->dtr_pin && !gpiod_get_raw_value(up->dtr_pin))
		ret |= TIOCM_DTR;
	/* CD is active low */
	if (up->cd_pin && !gpiod_get_raw_value(up->cd_pin))
		ret |= TIOCM_CD;
	/* RI is active low */
	if (up->ri_pin && !gpiod_get_raw_value(up->ri_pin))
		ret |= TIOCM_RI;
	/* DSR is active low */
	if (up->dsr_pin && !gpiod_get_raw_value(up->dsr_pin))
		ret |= TIOCM_DSR;
	if (crisv32_serial_get_cts(up))
		ret |= TIOCM_CTS;
	return ret;
}

static void etraxfs_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
{
	struct uart_cris_port *up = (struct uart_cris_port *)port;

	crisv32_serial_set_rts(up, mctrl & TIOCM_RTS ? 1 : 0, 0);
	/* DTR is active low */
	if (up->dtr_pin)
		gpiod_set_raw_value(up->dtr_pin, mctrl & TIOCM_DTR ? 0 : 1);
	/* RI is active low */
	if (up->ri_pin)
		gpiod_set_raw_value(up->ri_pin, mctrl & TIOCM_RNG ? 0 : 1);
	/* CD is active low */
	if (up->cd_pin)
		gpiod_set_raw_value(up->cd_pin, mctrl & TIOCM_CD ? 0 : 1);
}

static void etraxfs_uart_break_ctl(struct uart_port *port, int break_state)
{
	struct uart_cris_port *up = (struct uart_cris_port *)port;
	unsigned long flags;
	reg_ser_rw_tr_ctrl tr_ctrl;
	reg_ser_rw_tr_dma_en tr_dma_en;
	reg_ser_rw_intr_mask intr_mask;

	spin_lock_irqsave(&up->port.lock, flags);
	tr_ctrl = REG_RD(ser, up->regi_ser, rw_tr_ctrl);
	tr_dma_en = REG_RD(ser, up->regi_ser, rw_tr_dma_en);
	intr_mask = REG_RD(ser, up->regi_ser, rw_intr_mask);

	if (break_state != 0) { /* Send break */
		/*
		 * We need to disable DMA (if used) or tr_rdy interrupts if no
		 * DMA.  No need to make this conditional on use of DMA;
		 * disabling will be a no-op for the other mode.
		 */
		intr_mask.tr_rdy = regk_ser_no;
		tr_dma_en.en = 0;

		/*
		 * Stop transmission and set the txd pin to 0 after the
		 * current character.  The txd setting will take effect after
		 * any current transmission has completed.
		 */
		tr_ctrl.stop = 1;
		tr_ctrl.txd = 0;
	} else {
		/* Re-enable the serial interrupt. */
		intr_mask.tr_rdy = regk_ser_yes;

		tr_ctrl.stop = 0;
		tr_ctrl.txd = 1;
	}
	REG_WR(ser, up->regi_ser, rw_tr_ctrl, tr_ctrl);
	REG_WR(ser, up->regi_ser, rw_tr_dma_en, tr_dma_en);
	REG_WR(ser, up->regi_ser, rw_intr_mask, intr_mask);

	spin_unlock_irqrestore(&up->port.lock, flags);
}

static void
transmit_chars_no_dma(struct uart_cris_port *up)
{
	int max_count;
	struct circ_buf *xmit = &up->port.state->xmit;

	void __iomem *regi_ser = up->regi_ser;
	reg_ser_r_stat_din rstat;
	reg_ser_rw_ack_intr ack_intr = { .tr_rdy = regk_ser_yes };

	if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) {
		/* No more to send, so disable the interrupt. */
		reg_ser_rw_intr_mask intr_mask;

		intr_mask = REG_RD(ser, regi_ser, rw_intr_mask);
		intr_mask.tr_rdy = 0;
		intr_mask.tr_empty = 0;
		REG_WR(ser, regi_ser, rw_intr_mask, intr_mask);
		up->write_ongoing = 0;
		return;
	}

	/* If the serport is fast, we send up to max_count bytes before
	   exiting the loop.  */
	max_count = 64;
	do {
		reg_ser_rw_dout dout = { .data = xmit->buf[xmit->tail] };

		REG_WR(ser, regi_ser, rw_dout, dout);
		REG_WR(ser, regi_ser, rw_ack_intr, ack_intr);
		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE-1);
		up->port.icount.tx++;
		if (xmit->head == xmit->tail)
			break;
		rstat = REG_RD(ser, regi_ser, r_stat_din);
	} while ((--max_count > 0) && rstat.tr_rdy);

	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
		uart_write_wakeup(&up->port);
}

static void receive_chars_no_dma(struct uart_cris_port *up)
{
	reg_ser_rs_stat_din stat_din;
	reg_ser_r_stat_din rstat;
	struct tty_port *port;
	struct uart_icount *icount;
	int max_count = 16;
	char flag;
	reg_ser_rw_ack_intr ack_intr = { 0 };

	rstat = REG_RD(ser, up->regi_ser, r_stat_din);
	icount = &up->port.icount;
	port = &up->port.state->port;

	do {
		stat_din = REG_RD(ser, up->regi_ser, rs_stat_din);

		flag = TTY_NORMAL;
		ack_intr.dav = 1;
		REG_WR(ser, up->regi_ser, rw_ack_intr, ack_intr);
		icount->rx++;

		if (stat_din.framing_err | stat_din.par_err | stat_din.orun) {
			if (stat_din.data == 0x00 &&
			    stat_din.framing_err) {
				/* Most likely a break. */
				flag = TTY_BREAK;
				icount->brk++;
			} else if (stat_din.par_err) {
				flag = TTY_PARITY;
				icount->parity++;
			} else if (stat_din.orun) {
				flag = TTY_OVERRUN;
				icount->overrun++;
			} else if (stat_din.framing_err) {
				flag = TTY_FRAME;
				icount->frame++;
			}
		}

		/*
		 * If this becomes important, we probably *could* handle this
		 * gracefully by keeping track of the unhandled character.
		 */
		if (!tty_insert_flip_char(port, stat_din.data, flag))
			panic("%s: No tty buffer space", __func__);
		rstat = REG_RD(ser, up->regi_ser, r_stat_din);
	} while (rstat.dav && (max_count-- > 0));
	spin_unlock(&up->port.lock);
	tty_flip_buffer_push(port);
	spin_lock(&up->port.lock);
}

static irqreturn_t
ser_interrupt(int irq, void *dev_id)
{
	struct uart_cris_port *up = (struct uart_cris_port *)dev_id;
	void __iomem *regi_ser;
	int handled = 0;

	spin_lock(&up->port.lock);

	regi_ser = up->regi_ser;

	if (regi_ser) {
		reg_ser_r_masked_intr masked_intr;

		masked_intr = REG_RD(ser, regi_ser, r_masked_intr);
		/*
		 * Check what interrupts are active before taking
		 * actions. If DMA is used the interrupt shouldn't
		 * be enabled.
		 */
		if (masked_intr.dav) {
			receive_chars_no_dma(up);
			handled = 1;
		}
		check_modem_status(up);

		if (masked_intr.tr_rdy) {
			transmit_chars_no_dma(up);
			handled = 1;
		}
	}
	spin_unlock(&up->port.lock);
	return IRQ_RETVAL(handled);
}

#ifdef CONFIG_CONSOLE_POLL
static int etraxfs_uart_get_poll_char(struct uart_port *port)
{
	reg_ser_rs_stat_din stat;
	reg_ser_rw_ack_intr ack_intr = { 0 };
	struct uart_cris_port *up = (struct uart_cris_port *)port;

	do {
		stat = REG_RD(ser, up->regi_ser, rs_stat_din);
	} while (!stat.dav);

	/* Ack the data_avail interrupt. */
	ack_intr.dav = 1;
	REG_WR(ser, up->regi_ser, rw_ack_intr, ack_intr);

	return stat.data;
}

static void etraxfs_uart_put_poll_char(struct uart_port *port,
					unsigned char c)
{
	reg_ser_r_stat_din stat;
	struct uart_cris_port *up = (struct uart_cris_port *)port;

	do {
		stat = REG_RD(ser, up->regi_ser, r_stat_din);
	} while (!stat.tr_rdy);
	REG_WR_INT(ser, up->regi_ser, rw_dout, c);
}
#endif /* CONFIG_CONSOLE_POLL */

static int etraxfs_uart_startup(struct uart_port *port)
{
	struct uart_cris_port *up = (struct uart_cris_port *)port;
	unsigned long flags;
	reg_ser_rw_intr_mask ser_intr_mask = {0};

	ser_intr_mask.dav = regk_ser_yes;

	if (request_irq(etraxfs_uart_ports[port->line]->irq, ser_interrupt,
			0, DRV_NAME, etraxfs_uart_ports[port->line]))
		panic("irq ser%d", port->line);

	spin_lock_irqsave(&up->port.lock, flags);

	REG_WR(ser, up->regi_ser, rw_intr_mask, ser_intr_mask);

	etraxfs_uart_set_mctrl(&up->port, up->port.mctrl);

	spin_unlock_irqrestore(&up->port.lock, flags);

	return 0;
}

static void etraxfs_uart_shutdown(struct uart_port *port)
{
	struct uart_cris_port *up = (struct uart_cris_port *)port;
	unsigned long flags;

	spin_lock_irqsave(&up->port.lock, flags);

	etraxfs_uart_stop_tx(port);
	etraxfs_uart_stop_rx(port);

	free_irq(etraxfs_uart_ports[port->line]->irq,
		 etraxfs_uart_ports[port->line]);

	etraxfs_uart_set_mctrl(&up->port, up->port.mctrl);

	spin_unlock_irqrestore(&up->port.lock, flags);

}

static void
etraxfs_uart_set_termios(struct uart_port *port, struct ktermios *termios,
			 struct ktermios *old)
{
	struct uart_cris_port *up = (struct uart_cris_port *)port;
	unsigned long flags;
	reg_ser_rw_xoff xoff;
	reg_ser_rw_xoff_clr xoff_clr = {0};
	reg_ser_rw_tr_ctrl tx_ctrl = {0};
	reg_ser_rw_tr_dma_en tx_dma_en = {0};
	reg_ser_rw_rec_ctrl rx_ctrl = {0};
	reg_ser_rw_tr_baud_div tx_baud_div = {0};
	reg_ser_rw_rec_baud_div rx_baud_div = {0};
	int baud;

	if (old &&
	    termios->c_cflag == old->c_cflag &&
	    termios->c_iflag == old->c_iflag)
		return;

	/* Tx: 8 bit, no/even parity, 1 stop bit, no cts. */
	tx_ctrl.base_freq = regk_ser_f29_493;
	tx_ctrl.en = 0;
	tx_ctrl.stop = 0;
	tx_ctrl.auto_rts = regk_ser_no;
	tx_ctrl.txd = 1;
	tx_ctrl.auto_cts = 0;
	/* Rx: 8 bit, no/even parity. */
	rx_ctrl.dma_err = regk_ser_stop;
	rx_ctrl.sampling = regk_ser_majority;
	rx_ctrl.timeout = 1;

	rx_ctrl.rts_n = regk_ser_inactive;

	/* Common for tx and rx: 8N1. */
	tx_ctrl.data_bits = regk_ser_bits8;
	rx_ctrl.data_bits = regk_ser_bits8;
	tx_ctrl.par = regk_ser_even;
	rx_ctrl.par = regk_ser_even;
	tx_ctrl.par_en = regk_ser_no;
	rx_ctrl.par_en = regk_ser_no;

	tx_ctrl.stop_bits = regk_ser_bits1;

	/*
	 * Change baud-rate and write it to the hardware.
	 *
	 * baud_clock = base_freq / (divisor*8)
	 * divisor = base_freq / (baud_clock * 8)
	 * base_freq is either:
	 * off, ext, 29.493MHz, 32.000 MHz, 32.768 MHz or 100 MHz
	 * 20.493MHz is used for standard baudrates
	 */

	/*
	 * For the console port we keep the original baudrate here.  Not very
	 * beautiful.
	 */
	if ((port != console_port) || old)
		baud = uart_get_baud_rate(port, termios, old, 0,
					  port->uartclk / 8);
	else
		baud = console_baud;

	tx_baud_div.div = 29493000 / (8 * baud);
	/* Rx uses same as tx. */
	rx_baud_div.div = tx_baud_div.div;
	rx_ctrl.base_freq = tx_ctrl.base_freq;

	if ((termios->c_cflag & CSIZE) == CS7) {
		/* Set 7 bit mode. */
		tx_ctrl.data_bits = regk_ser_bits7;
		rx_ctrl.data_bits = regk_ser_bits7;
	}

	if (termios->c_cflag & CSTOPB) {
		/* Set 2 stop bit mode. */
		tx_ctrl.stop_bits = regk_ser_bits2;
	}

	if (termios->c_cflag & PARENB) {
		/* Enable parity. */
		tx_ctrl.par_en = regk_ser_yes;
		rx_ctrl.par_en = regk_ser_yes;
	}

	if (termios->c_cflag & CMSPAR) {
		if (termios->c_cflag & PARODD) {
			/* Set mark parity if PARODD and CMSPAR. */
			tx_ctrl.par = regk_ser_mark;
			rx_ctrl.par = regk_ser_mark;
		} else {
			tx_ctrl.par = regk_ser_space;
			rx_ctrl.par = regk_ser_space;
		}
	} else {
		if (termios->c_cflag & PARODD) {
			/* Set odd parity. */
		       tx_ctrl.par = regk_ser_odd;
		       rx_ctrl.par = regk_ser_odd;
		}
	}

	if (termios->c_cflag & CRTSCTS) {
		/* Enable automatic CTS handling. */
		tx_ctrl.auto_cts = regk_ser_yes;
	}

	/* Make sure the tx and rx are enabled. */
	tx_ctrl.en = regk_ser_yes;
	rx_ctrl.en = regk_ser_yes;

	spin_lock_irqsave(&port->lock, flags);

	tx_dma_en.en = 0;
	REG_WR(ser, up->regi_ser, rw_tr_dma_en, tx_dma_en);

	/* Actually write the control regs (if modified) to the hardware. */
	uart_update_timeout(port, termios->c_cflag, port->uartclk/8);
	MODIFY_REG(up->regi_ser, rw_rec_baud_div, rx_baud_div);
	MODIFY_REG(up->regi_ser, rw_rec_ctrl, rx_ctrl);

	MODIFY_REG(up->regi_ser, rw_tr_baud_div, tx_baud_div);
	MODIFY_REG(up->regi_ser, rw_tr_ctrl, tx_ctrl);

	tx_dma_en.en = 0;
	REG_WR(ser, up->regi_ser, rw_tr_dma_en, tx_dma_en);

	xoff = REG_RD(ser, up->regi_ser, rw_xoff);

	if (up->port.state && up->port.state->port.tty &&
	    (up->port.state->port.tty->termios.c_iflag & IXON)) {
		xoff.chr = STOP_CHAR(up->port.state->port.tty);
		xoff.automatic = regk_ser_yes;
	} else
		xoff.automatic = regk_ser_no;

	MODIFY_REG(up->regi_ser, rw_xoff, xoff);

	/*
	 * Make sure we don't start in an automatically shut-off state due to
	 * a previous early exit.
	 */
	xoff_clr.clr = 1;
	REG_WR(ser, up->regi_ser, rw_xoff_clr, xoff_clr);

	etraxfs_uart_set_mctrl(&up->port, up->port.mctrl);
	spin_unlock_irqrestore(&up->port.lock, flags);
}

static const char *
etraxfs_uart_type(struct uart_port *port)
{
	return "CRISv32";
}

static void etraxfs_uart_release_port(struct uart_port *port)
{
}

static int etraxfs_uart_request_port(struct uart_port *port)
{
	return 0;
}

static void etraxfs_uart_config_port(struct uart_port *port, int flags)
{
	struct uart_cris_port *up = (struct uart_cris_port *)port;

	up->port.type = PORT_CRIS;
}

static const struct uart_ops etraxfs_uart_pops = {
	.tx_empty = etraxfs_uart_tx_empty,
	.set_mctrl = etraxfs_uart_set_mctrl,
	.get_mctrl = etraxfs_uart_get_mctrl,
	.stop_tx = etraxfs_uart_stop_tx,
	.start_tx = etraxfs_uart_start_tx,
	.send_xchar = etraxfs_uart_send_xchar,
	.stop_rx = etraxfs_uart_stop_rx,
	.enable_ms = etraxfs_uart_enable_ms,
	.break_ctl = etraxfs_uart_break_ctl,
	.startup = etraxfs_uart_startup,
	.shutdown = etraxfs_uart_shutdown,
	.set_termios = etraxfs_uart_set_termios,
	.type = etraxfs_uart_type,
	.release_port = etraxfs_uart_release_port,
	.request_port = etraxfs_uart_request_port,
	.config_port = etraxfs_uart_config_port,
#ifdef CONFIG_CONSOLE_POLL
	.poll_get_char = etraxfs_uart_get_poll_char,
	.poll_put_char = etraxfs_uart_put_poll_char,
#endif
};

static void cris_serial_port_init(struct uart_port *port, int line)
{
	struct uart_cris_port *up = (struct uart_cris_port *)port;

	if (up->initialized)
		return;
	up->initialized = 1;
	port->line = line;
	spin_lock_init(&port->lock);
	port->ops = &etraxfs_uart_pops;
	port->irq = up->irq;
	port->iobase = (unsigned long) up->regi_ser;
	port->uartclk = 29493000;

	/*
	 * We can't fit any more than 255 here (unsigned char), though
	 * actually UART_XMIT_SIZE characters could be pending output.
	 * At time of this writing, the definition of "fifosize" is here the
	 * amount of characters that can be pending output after a start_tx call
	 * until tx_empty returns 1: see serial_core.c:uart_wait_until_sent.
	 * This matters for timeout calculations unfortunately, but keeping
	 * larger amounts at the DMA wouldn't win much so let's just play nice.
	 */
	port->fifosize = 255;
	port->flags = UPF_BOOT_AUTOCONF;
}

static int etraxfs_uart_probe(struct platform_device *pdev)
{
	struct device_node *np = pdev->dev.of_node;
	struct uart_cris_port *up;
	int dev_id;

	if (!np)
		return -ENODEV;

	dev_id = of_alias_get_id(np, "serial");
	if (dev_id < 0)
		dev_id = 0;

	if (dev_id >= UART_NR)
		return -EINVAL;

	if (etraxfs_uart_ports[dev_id])
		return -EBUSY;

	up = devm_kzalloc(&pdev->dev, sizeof(struct uart_cris_port),
			  GFP_KERNEL);
	if (!up)
		return -ENOMEM;

	up->irq = irq_of_parse_and_map(np, 0);
	up->regi_ser = of_iomap(np, 0);
	up->dtr_pin = devm_gpiod_get_optional(&pdev->dev, "dtr");
	up->dsr_pin = devm_gpiod_get_optional(&pdev->dev, "dsr");
	up->ri_pin = devm_gpiod_get_optional(&pdev->dev, "ri");
	up->cd_pin = devm_gpiod_get_optional(&pdev->dev, "cd");
	up->port.dev = &pdev->dev;
	cris_serial_port_init(&up->port, dev_id);

	etraxfs_uart_ports[dev_id] = up;
	platform_set_drvdata(pdev, &up->port);
	uart_add_one_port(&etraxfs_uart_driver, &up->port);

	return 0;
}

static int etraxfs_uart_remove(struct platform_device *pdev)
{
	struct uart_port *port;

	port = platform_get_drvdata(pdev);
	uart_remove_one_port(&etraxfs_uart_driver, port);
	etraxfs_uart_ports[pdev->id] = NULL;

	return 0;
}

static const struct of_device_id etraxfs_uart_dt_ids[] = {
	{ .compatible = "axis,etraxfs-uart" },
	{ /* sentinel */ }
};

MODULE_DEVICE_TABLE(of, etraxfs_uart_dt_ids);

static struct platform_driver etraxfs_uart_platform_driver = {
	.driver = {
		.name   = DRV_NAME,
		.of_match_table	= of_match_ptr(etraxfs_uart_dt_ids),
	},
	.probe          = etraxfs_uart_probe,
	.remove         = etraxfs_uart_remove,
};

static int __init etraxfs_uart_init(void)
{
	int ret;

	ret = uart_register_driver(&etraxfs_uart_driver);
	if (ret)
		return ret;

	ret = platform_driver_register(&etraxfs_uart_platform_driver);
	if (ret)
		uart_unregister_driver(&etraxfs_uart_driver);

	return ret;
}

static void __exit etraxfs_uart_exit(void)
{
	platform_driver_unregister(&etraxfs_uart_platform_driver);
	uart_unregister_driver(&etraxfs_uart_driver);
}

module_init(etraxfs_uart_init);
module_exit(etraxfs_uart_exit);