summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/arm/fas216.c
blob: e64c3af7c1a0166d47ffe18dba3b5c2754385c74 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
986
987
988
989
990
991
992
993
994
995
996
997
998
999
1000
1001
1002
1003
1004
1005
1006
1007
1008
1009
1010
1011
1012
1013
1014
1015
1016
1017
1018
1019
1020
1021
1022
1023
1024
1025
1026
1027
1028
1029
1030
1031
1032
1033
1034
1035
1036
1037
1038
1039
1040
1041
1042
1043
1044
1045
1046
1047
1048
1049
1050
1051
1052
1053
1054
1055
1056
1057
1058
1059
1060
1061
1062
1063
1064
1065
1066
1067
1068
1069
1070
1071
1072
1073
1074
1075
1076
1077
1078
1079
1080
1081
1082
1083
1084
1085
1086
1087
1088
1089
1090
1091
1092
1093
1094
1095
1096
1097
1098
1099
1100
1101
1102
1103
1104
1105
1106
1107
1108
1109
1110
1111
1112
1113
1114
1115
1116
1117
1118
1119
1120
1121
1122
1123
1124
1125
1126
1127
1128
1129
1130
1131
1132
1133
1134
1135
1136
1137
1138
1139
1140
1141
1142
1143
1144
1145
1146
1147
1148
1149
1150
1151
1152
1153
1154
1155
1156
1157
1158
1159
1160
1161
1162
1163
1164
1165
1166
1167
1168
1169
1170
1171
1172
1173
1174
1175
1176
1177
1178
1179
1180
1181
1182
1183
1184
1185
1186
1187
1188
1189
1190
1191
1192
1193
1194
1195
1196
1197
1198
1199
1200
1201
1202
1203
1204
1205
1206
1207
1208
1209
1210
1211
1212
1213
1214
1215
1216
1217
1218
1219
1220
1221
1222
1223
1224
1225
1226
1227
1228
1229
1230
1231
1232
1233
1234
1235
1236
1237
1238
1239
1240
1241
1242
1243
1244
1245
1246
1247
1248
1249
1250
1251
1252
1253
1254
1255
1256
1257
1258
1259
1260
1261
1262
1263
1264
1265
1266
1267
1268
1269
1270
1271
1272
1273
1274
1275
1276
1277
1278
1279
1280
1281
1282
1283
1284
1285
1286
1287
1288
1289
1290
1291
1292
1293
1294
1295
1296
1297
1298
1299
1300
1301
1302
1303
1304
1305
1306
1307
1308
1309
1310
1311
1312
1313
1314
1315
1316
1317
1318
1319
1320
1321
1322
1323
1324
1325
1326
1327
1328
1329
1330
1331
1332
1333
1334
1335
1336
1337
1338
1339
1340
1341
1342
1343
1344
1345
1346
1347
1348
1349
1350
1351
1352
1353
1354
1355
1356
1357
1358
1359
1360
1361
1362
1363
1364
1365
1366
1367
1368
1369
1370
1371
1372
1373
1374
1375
1376
1377
1378
1379
1380
1381
1382
1383
1384
1385
1386
1387
1388
1389
1390
1391
1392
1393
1394
1395
1396
1397
1398
1399
1400
1401
1402
1403
1404
1405
1406
1407
1408
1409
1410
1411
1412
1413
1414
1415
1416
1417
1418
1419
1420
1421
1422
1423
1424
1425
1426
1427
1428
1429
1430
1431
1432
1433
1434
1435
1436
1437
1438
1439
1440
1441
1442
1443
1444
1445
1446
1447
1448
1449
1450
1451
1452
1453
1454
1455
1456
1457
1458
1459
1460
1461
1462
1463
1464
1465
1466
1467
1468
1469
1470
1471
1472
1473
1474
1475
1476
1477
1478
1479
1480
1481
1482
1483
1484
1485
1486
1487
1488
1489
1490
1491
1492
1493
1494
1495
1496
1497
1498
1499
1500
1501
1502
1503
1504
1505
1506
1507
1508
1509
1510
1511
1512
1513
1514
1515
1516
1517
1518
1519
1520
1521
1522
1523
1524
1525
1526
1527
1528
1529
1530
1531
1532
1533
1534
1535
1536
1537
1538
1539
1540
1541
1542
1543
1544
1545
1546
1547
1548
1549
1550
1551
1552
1553
1554
1555
1556
1557
1558
1559
1560
1561
1562
1563
1564
1565
1566
1567
1568
1569
1570
1571
1572
1573
1574
1575
1576
1577
1578
1579
1580
1581
1582
1583
1584
1585
1586
1587
1588
1589
1590
1591
1592
1593
1594
1595
1596
1597
1598
1599
1600
1601
1602
1603
1604
1605
1606
1607
1608
1609
1610
1611
1612
1613
1614
1615
1616
1617
1618
1619
1620
1621
1622
1623
1624
1625
1626
1627
1628
1629
1630
1631
1632
1633
1634
1635
1636
1637
1638
1639
1640
1641
1642
1643
1644
1645
1646
1647
1648
1649
1650
1651
1652
1653
1654
1655
1656
1657
1658
1659
1660
1661
1662
1663
1664
1665
1666
1667
1668
1669
1670
1671
1672
1673
1674
1675
1676
1677
1678
1679
1680
1681
1682
1683
1684
1685
1686
1687
1688
1689
1690
1691
1692
1693
1694
1695
1696
1697
1698
1699
1700
1701
1702
1703
1704
1705
1706
1707
1708
1709
1710
1711
1712
1713
1714
1715
1716
1717
1718
1719
1720
1721
1722
1723
1724
1725
1726
1727
1728
1729
1730
1731
1732
1733
1734
1735
1736
1737
1738
1739
1740
1741
1742
1743
1744
1745
1746
1747
1748
1749
1750
1751
1752
1753
1754
1755
1756
1757
1758
1759
1760
1761
1762
1763
1764
1765
1766
1767
1768
1769
1770
1771
1772
1773
1774
1775
1776
1777
1778
1779
1780
1781
1782
1783
1784
1785
1786
1787
1788
1789
1790
1791
1792
1793
1794
1795
1796
1797
1798
1799
1800
1801
1802
1803
1804
1805
1806
1807
1808
1809
1810
1811
1812
1813
1814
1815
1816
1817
1818
1819
1820
1821
1822
1823
1824
1825
1826
1827
1828
1829
1830
1831
1832
1833
1834
1835
1836
1837
1838
1839
1840
1841
1842
1843
1844
1845
1846
1847
1848
1849
1850
1851
1852
1853
1854
1855
1856
1857
1858
1859
1860
1861
1862
1863
1864
1865
1866
1867
1868
1869
1870
1871
1872
1873
1874
1875
1876
1877
1878
1879
1880
1881
1882
1883
1884
1885
1886
1887
1888
1889
1890
1891
1892
1893
1894
1895
1896
1897
1898
1899
1900
1901
1902
1903
1904
1905
1906
1907
1908
1909
1910
1911
1912
1913
1914
1915
1916
1917
1918
1919
1920
1921
1922
1923
1924
1925
1926
1927
1928
1929
1930
1931
1932
1933
1934
1935
1936
1937
1938
1939
1940
1941
1942
1943
1944
1945
1946
1947
1948
1949
1950
1951
1952
1953
1954
1955
1956
1957
1958
1959
1960
1961
1962
1963
1964
1965
1966
1967
1968
1969
1970
1971
1972
1973
1974
1975
1976
1977
1978
1979
1980
1981
1982
1983
1984
1985
1986
1987
1988
1989
1990
1991
1992
1993
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
2025
2026
2027
2028
2029
2030
2031
2032
2033
2034
2035
2036
2037
2038
2039
2040
2041
2042
2043
2044
2045
2046
2047
2048
2049
2050
2051
2052
2053
2054
2055
2056
2057
2058
2059
2060
2061
2062
2063
2064
2065
2066
2067
2068
2069
2070
2071
2072
2073
2074
2075
2076
2077
2078
2079
2080
2081
2082
2083
2084
2085
2086
2087
2088
2089
2090
2091
2092
2093
2094
2095
2096
2097
2098
2099
2100
2101
2102
2103
2104
2105
2106
2107
2108
2109
2110
2111
2112
2113
2114
2115
2116
2117
2118
2119
2120
2121
2122
2123
2124
2125
2126
2127
2128
2129
2130
2131
2132
2133
2134
2135
2136
2137
2138
2139
2140
2141
2142
2143
2144
2145
2146
2147
2148
2149
2150
2151
2152
2153
2154
2155
2156
2157
2158
2159
2160
2161
2162
2163
2164
2165
2166
2167
2168
2169
2170
2171
2172
2173
2174
2175
2176
2177
2178
2179
2180
2181
2182
2183
2184
2185
2186
2187
2188
2189
2190
2191
2192
2193
2194
2195
2196
2197
2198
2199
2200
2201
2202
2203
2204
2205
2206
2207
2208
2209
2210
2211
2212
2213
2214
2215
2216
2217
2218
2219
2220
2221
2222
2223
2224
2225
2226
2227
2228
2229
2230
2231
2232
2233
2234
2235
2236
2237
2238
2239
2240
2241
2242
2243
2244
2245
2246
2247
2248
2249
2250
2251
2252
2253
2254
2255
2256
2257
2258
2259
2260
2261
2262
2263
2264
2265
2266
2267
2268
2269
2270
2271
2272
2273
2274
2275
2276
2277
2278
2279
2280
2281
2282
2283
2284
2285
2286
2287
2288
2289
2290
2291
2292
2293
2294
2295
2296
2297
2298
2299
2300
2301
2302
2303
2304
2305
2306
2307
2308
2309
2310
2311
2312
2313
2314
2315
2316
2317
2318
2319
2320
2321
2322
2323
2324
2325
2326
2327
2328
2329
2330
2331
2332
2333
2334
2335
2336
2337
2338
2339
2340
2341
2342
2343
2344
2345
2346
2347
2348
2349
2350
2351
2352
2353
2354
2355
2356
2357
2358
2359
2360
2361
2362
2363
2364
2365
2366
2367
2368
2369
2370
2371
2372
2373
2374
2375
2376
2377
2378
2379
2380
2381
2382
2383
2384
2385
2386
2387
2388
2389
2390
2391
2392
2393
2394
2395
2396
2397
2398
2399
2400
2401
2402
2403
2404
2405
2406
2407
2408
2409
2410
2411
2412
2413
2414
2415
2416
2417
2418
2419
2420
2421
2422
2423
2424
2425
2426
2427
2428
2429
2430
2431
2432
2433
2434
2435
2436
2437
2438
2439
2440
2441
2442
2443
2444
2445
2446
2447
2448
2449
2450
2451
2452
2453
2454
2455
2456
2457
2458
2459
2460
2461
2462
2463
2464
2465
2466
2467
2468
2469
2470
2471
2472
2473
2474
2475
2476
2477
2478
2479
2480
2481
2482
2483
2484
2485
2486
2487
2488
2489
2490
2491
2492
2493
2494
2495
2496
2497
2498
2499
2500
2501
2502
2503
2504
2505
2506
2507
2508
2509
2510
2511
2512
2513
2514
2515
2516
2517
2518
2519
2520
2521
2522
2523
2524
2525
2526
2527
2528
2529
2530
2531
2532
2533
2534
2535
2536
2537
2538
2539
2540
2541
2542
2543
2544
2545
2546
2547
2548
2549
2550
2551
2552
2553
2554
2555
2556
2557
2558
2559
2560
2561
2562
2563
2564
2565
2566
2567
2568
2569
2570
2571
2572
2573
2574
2575
2576
2577
2578
2579
2580
2581
2582
2583
2584
2585
2586
2587
2588
2589
2590
2591
2592
2593
2594
2595
2596
2597
2598
2599
2600
2601
2602
2603
2604
2605
2606
2607
2608
2609
2610
2611
2612
2613
2614
2615
2616
2617
2618
2619
2620
2621
2622
2623
2624
2625
2626
2627
2628
2629
2630
2631
2632
2633
2634
2635
2636
2637
2638
2639
2640
2641
2642
2643
2644
2645
2646
2647
2648
2649
2650
2651
2652
2653
2654
2655
2656
2657
2658
2659
2660
2661
2662
2663
2664
2665
2666
2667
2668
2669
2670
2671
2672
2673
2674
2675
2676
2677
2678
2679
2680
2681
2682
2683
2684
2685
2686
2687
2688
2689
2690
2691
2692
2693
2694
2695
2696
2697
2698
2699
2700
2701
2702
2703
2704
2705
2706
2707
2708
2709
2710
2711
2712
2713
2714
2715
2716
2717
2718
2719
2720
2721
2722
2723
2724
2725
2726
2727
2728
2729
2730
2731
2732
2733
2734
2735
2736
2737
2738
2739
2740
2741
2742
2743
2744
2745
2746
2747
2748
2749
2750
2751
2752
2753
2754
2755
2756
2757
2758
2759
2760
2761
2762
2763
2764
2765
2766
2767
2768
2769
2770
2771
2772
2773
2774
2775
2776
2777
2778
2779
2780
2781
2782
2783
2784
2785
2786
2787
2788
2789
2790
2791
2792
2793
2794
2795
2796
2797
2798
2799
2800
2801
2802
2803
2804
2805
2806
2807
2808
2809
2810
2811
2812
2813
2814
2815
2816
2817
2818
2819
2820
2821
2822
2823
2824
2825
2826
2827
2828
2829
2830
2831
2832
2833
2834
2835
2836
2837
2838
2839
2840
2841
2842
2843
2844
2845
2846
2847
2848
2849
2850
2851
2852
2853
2854
2855
2856
2857
2858
2859
2860
2861
2862
2863
2864
2865
2866
2867
2868
2869
2870
2871
2872
2873
2874
2875
2876
2877
2878
2879
2880
2881
2882
2883
2884
2885
2886
2887
2888
2889
2890
2891
2892
2893
2894
2895
2896
2897
2898
2899
2900
2901
2902
2903
2904
2905
2906
2907
2908
2909
2910
2911
2912
2913
2914
2915
2916
2917
2918
2919
2920
2921
2922
2923
2924
2925
2926
2927
2928
2929
2930
2931
2932
2933
2934
2935
2936
2937
2938
2939
2940
2941
2942
2943
2944
2945
2946
2947
2948
2949
2950
2951
2952
2953
2954
2955
2956
2957
2958
2959
2960
2961
2962
2963
2964
2965
2966
2967
2968
2969
2970
2971
2972
2973
2974
2975
2976
2977
2978
2979
2980
2981
2982
2983
2984
2985
2986
2987
2988
2989
2990
2991
2992
2993
2994
2995
2996
2997
2998
2999
3000
3001
3002
3003
3004
3005
3006
3007
3008
3009
3010
3011
3012
3013
3014
3015
3016
3017
3018
3019
3020
3021
3022
3023
3024
3025
3026
3027
3028
3029
3030
3031
3032
/*
 *  linux/drivers/acorn/scsi/fas216.c
 *
 *  Copyright (C) 1997-2003 Russell King
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 *
 * Based on information in qlogicfas.c by Tom Zerucha, Michael Griffith, and
 * other sources, including:
 *   the AMD Am53CF94 data sheet
 *   the AMD Am53C94 data sheet
 *
 * This is a generic driver.  To use it, have a look at cumana_2.c.  You
 * should define your own structure that overlays FAS216_Info, eg:
 * struct my_host_data {
 *    FAS216_Info info;
 *    ... my host specific data ...
 * };
 *
 * Changelog:
 *  30-08-1997	RMK	Created
 *  14-09-1997	RMK	Started disconnect support
 *  08-02-1998	RMK	Corrected real DMA support
 *  15-02-1998	RMK	Started sync xfer support
 *  06-04-1998	RMK	Tightened conditions for printing incomplete
 *			transfers
 *  02-05-1998	RMK	Added extra checks in fas216_reset
 *  24-05-1998	RMK	Fixed synchronous transfers with period >= 200ns
 *  27-06-1998	RMK	Changed asm/delay.h to linux/delay.h
 *  26-08-1998	RMK	Improved message support wrt MESSAGE_REJECT
 *  02-04-2000	RMK	Converted to use the new error handling, and
 *			automatically request sense data upon check
 *			condition status from targets.
 */
#include <linux/module.h>
#include <linux/blkdev.h>
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/ioport.h>
#include <linux/proc_fs.h>
#include <linux/delay.h>
#include <linux/bitops.h>
#include <linux/init.h>
#include <linux/interrupt.h>

#include <asm/dma.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/ecard.h>

#include "../scsi.h"
#include <scsi/scsi_dbg.h>
#include <scsi/scsi_host.h>
#include "fas216.h"
#include "scsi.h"

/* NOTE: SCSI2 Synchronous transfers *require* DMA according to
 *  the data sheet.  This restriction is crazy, especially when
 *  you only want to send 16 bytes!  What were the guys who
 *  designed this chip on at that time?  Did they read the SCSI2
 *  spec at all?  The following sections are taken from the SCSI2
 *  standard (s2r10) concerning this:
 *
 * > IMPLEMENTORS NOTES:
 * >   (1)  Re-negotiation at every selection is not recommended, since a
 * >   significant performance impact is likely.
 *
 * >  The implied synchronous agreement shall remain in effect until a BUS DEVICE
 * >  RESET message is received, until a hard reset condition occurs, or until one
 * >  of the two SCSI devices elects to modify the agreement.  The default data
 * >  transfer mode is asynchronous data transfer mode.  The default data transfer
 * >  mode is entered at power on, after a BUS DEVICE RESET message, or after a hard
 * >  reset condition.
 *
 *  In total, this means that once you have elected to use synchronous
 *  transfers, you must always use DMA.
 *
 *  I was thinking that this was a good chip until I found this restriction ;(
 */
#define SCSI2_SYNC
#undef  SCSI2_TAG

#undef DEBUG_CONNECT
#undef DEBUG_MESSAGES

#undef CHECK_STRUCTURE

#define LOG_CONNECT		(1 << 0)
#define LOG_BUSSERVICE		(1 << 1)
#define LOG_FUNCTIONDONE	(1 << 2)
#define LOG_MESSAGES		(1 << 3)
#define LOG_BUFFER		(1 << 4)
#define LOG_ERROR		(1 << 8)

static int level_mask = LOG_ERROR;

module_param(level_mask, int, 0644);

static int __init fas216_log_setup(char *str)
{
	char *s;

	level_mask = 0;

	while ((s = strsep(&str, ",")) != NULL) {
		switch (s[0]) {
		case 'a':
			if (strcmp(s, "all") == 0)
				level_mask |= -1;
			break;
		case 'b':
			if (strncmp(s, "bus", 3) == 0)
				level_mask |= LOG_BUSSERVICE;
			if (strncmp(s, "buf", 3) == 0)
				level_mask |= LOG_BUFFER;
			break;
		case 'c':
			level_mask |= LOG_CONNECT;
			break;
		case 'e':
			level_mask |= LOG_ERROR;
			break;
		case 'm':
			level_mask |= LOG_MESSAGES;
			break;
		case 'n':
			if (strcmp(s, "none") == 0)
				level_mask = 0;
			break;
		case 's':
			level_mask |= LOG_FUNCTIONDONE;
			break;
		}
	}
	return 1;
}

__setup("fas216_logging=", fas216_log_setup);

static inline unsigned char fas216_readb(FAS216_Info *info, unsigned int reg)
{
	unsigned int off = reg << info->scsi.io_shift;
	return readb(info->scsi.io_base + off);
}

static inline void fas216_writeb(FAS216_Info *info, unsigned int reg, unsigned int val)
{
	unsigned int off = reg << info->scsi.io_shift;
	writeb(val, info->scsi.io_base + off);
}

static void fas216_dumpstate(FAS216_Info *info)
{
	unsigned char is, stat, inst;

	is   = fas216_readb(info, REG_IS);
	stat = fas216_readb(info, REG_STAT);
	inst = fas216_readb(info, REG_INST);
	
	printk("FAS216: CTCL=%02X CTCM=%02X CMD=%02X STAT=%02X"
	       " INST=%02X IS=%02X CFIS=%02X",
		fas216_readb(info, REG_CTCL),
		fas216_readb(info, REG_CTCM),
		fas216_readb(info, REG_CMD),  stat, inst, is,
		fas216_readb(info, REG_CFIS));
	printk(" CNTL1=%02X CNTL2=%02X CNTL3=%02X CTCH=%02X\n",
		fas216_readb(info, REG_CNTL1),
		fas216_readb(info, REG_CNTL2),
		fas216_readb(info, REG_CNTL3),
		fas216_readb(info, REG_CTCH));
}

static void print_SCp(struct scsi_pointer *SCp, const char *prefix, const char *suffix)
{
	printk("%sptr %p this_residual 0x%x buffer %p buffers_residual 0x%x%s",
		prefix, SCp->ptr, SCp->this_residual, SCp->buffer,
		SCp->buffers_residual, suffix);
}

#ifdef CHECK_STRUCTURE
static void fas216_dumpinfo(FAS216_Info *info)
{
	static int used = 0;
	int i;

	if (used++)
		return;

	printk("FAS216_Info=\n");
	printk("  { magic_start=%lX host=%p SCpnt=%p origSCpnt=%p\n",
		info->magic_start, info->host, info->SCpnt,
		info->origSCpnt);
	printk("    scsi={ io_shift=%X irq=%X cfg={ %X %X %X %X }\n",
		info->scsi.io_shift, info->scsi.irq,
		info->scsi.cfg[0], info->scsi.cfg[1], info->scsi.cfg[2],
		info->scsi.cfg[3]);
	printk("           type=%p phase=%X\n",
		info->scsi.type, info->scsi.phase);
	print_SCp(&info->scsi.SCp, "           SCp={ ", " }\n");
	printk("      msgs async_stp=%X disconnectable=%d aborting=%d }\n",
		info->scsi.async_stp,
		info->scsi.disconnectable, info->scsi.aborting);
	printk("    stats={ queues=%X removes=%X fins=%X reads=%X writes=%X miscs=%X\n"
	       "            disconnects=%X aborts=%X bus_resets=%X host_resets=%X}\n",
		info->stats.queues, info->stats.removes, info->stats.fins,
		info->stats.reads, info->stats.writes, info->stats.miscs,
		info->stats.disconnects, info->stats.aborts, info->stats.bus_resets,
		info->stats.host_resets);
	printk("    ifcfg={ clockrate=%X select_timeout=%X asyncperiod=%X sync_max_depth=%X }\n",
		info->ifcfg.clockrate, info->ifcfg.select_timeout,
		info->ifcfg.asyncperiod, info->ifcfg.sync_max_depth);
	for (i = 0; i < 8; i++) {
		printk("    busyluns[%d]=%08lx dev[%d]={ disconnect_ok=%d stp=%X sof=%X sync_state=%X }\n",
			i, info->busyluns[i], i,
			info->device[i].disconnect_ok, info->device[i].stp,
			info->device[i].sof, info->device[i].sync_state);
	}
	printk("    dma={ transfer_type=%X setup=%p pseudo=%p stop=%p }\n",
		info->dma.transfer_type, info->dma.setup,
		info->dma.pseudo, info->dma.stop);
	printk("    internal_done=%X magic_end=%lX }\n",
		info->internal_done, info->magic_end);
}

static void __fas216_checkmagic(FAS216_Info *info, const char *func)
{
	int corruption = 0;
	if (info->magic_start != MAGIC) {
		printk(KERN_CRIT "FAS216 Error: magic at start corrupted\n");
		corruption++;
	}
	if (info->magic_end != MAGIC) {
		printk(KERN_CRIT "FAS216 Error: magic at end corrupted\n");
		corruption++;
	}
	if (corruption) {
		fas216_dumpinfo(info);
		panic("scsi memory space corrupted in %s", func);
	}
}
#define fas216_checkmagic(info) __fas216_checkmagic((info), __func__)
#else
#define fas216_checkmagic(info)
#endif

static const char *fas216_bus_phase(int stat)
{
	static const char *phases[] = {
		"DATA OUT", "DATA IN",
		"COMMAND", "STATUS",
		"MISC OUT", "MISC IN",
		"MESG OUT", "MESG IN"
	};

	return phases[stat & STAT_BUSMASK];
}

static const char *fas216_drv_phase(FAS216_Info *info)
{
	static const char *phases[] = {
		[PHASE_IDLE]		= "idle",
		[PHASE_SELECTION]	= "selection",
		[PHASE_COMMAND]		= "command",
		[PHASE_DATAOUT]		= "data out",
		[PHASE_DATAIN]		= "data in",
		[PHASE_MSGIN]		= "message in",
		[PHASE_MSGIN_DISCONNECT]= "disconnect",
		[PHASE_MSGOUT_EXPECT]	= "expect message out",
		[PHASE_MSGOUT]		= "message out",
		[PHASE_STATUS]		= "status",
		[PHASE_DONE]		= "done",
	};

	if (info->scsi.phase < ARRAY_SIZE(phases) &&
	    phases[info->scsi.phase])
		return phases[info->scsi.phase];
	return "???";
}

static char fas216_target(FAS216_Info *info)
{
	if (info->SCpnt)
		return '0' + info->SCpnt->device->id;
	else
		return 'H';
}

static void
fas216_do_log(FAS216_Info *info, char target, char *fmt, va_list ap)
{
	static char buf[1024];

	vsnprintf(buf, sizeof(buf), fmt, ap);
	printk("scsi%d.%c: %s", info->host->host_no, target, buf);
}

static void fas216_log_command(FAS216_Info *info, int level,
			       struct scsi_cmnd *SCpnt, char *fmt, ...)
{
	va_list args;

	if (level != 0 && !(level & level_mask))
		return;

	va_start(args, fmt);
	fas216_do_log(info, '0' + SCpnt->device->id, fmt, args);
	va_end(args);

	scsi_print_command(SCpnt);
}

static void
fas216_log_target(FAS216_Info *info, int level, int target, char *fmt, ...)
{
	va_list args;

	if (level != 0 && !(level & level_mask))
		return;

	if (target < 0)
		target = 'H';
	else
		target += '0';

	va_start(args, fmt);
	fas216_do_log(info, target, fmt, args);
	va_end(args);

	printk("\n");
}

static void fas216_log(FAS216_Info *info, int level, char *fmt, ...)
{
	va_list args;

	if (level != 0 && !(level & level_mask))
		return;

	va_start(args, fmt);
	fas216_do_log(info, fas216_target(info), fmt, args);
	va_end(args);

	printk("\n");
}

#define PH_SIZE	32

static struct { int stat, ssr, isr, ph; } ph_list[PH_SIZE];
static int ph_ptr;

static void add_debug_list(int stat, int ssr, int isr, int ph)
{
	ph_list[ph_ptr].stat = stat;
	ph_list[ph_ptr].ssr = ssr;
	ph_list[ph_ptr].isr = isr;
	ph_list[ph_ptr].ph = ph;

	ph_ptr = (ph_ptr + 1) & (PH_SIZE-1);
}

static struct { int command; void *from; } cmd_list[8];
static int cmd_ptr;

static void fas216_cmd(FAS216_Info *info, unsigned int command)
{
	cmd_list[cmd_ptr].command = command;
	cmd_list[cmd_ptr].from = __builtin_return_address(0);

	cmd_ptr = (cmd_ptr + 1) & 7;

	fas216_writeb(info, REG_CMD, command);
}

static void print_debug_list(void)
{
	int i;

	i = ph_ptr;

	printk(KERN_ERR "SCSI IRQ trail\n");
	do {
		printk(" %02x:%02x:%02x:%1x",
			ph_list[i].stat, ph_list[i].ssr,
			ph_list[i].isr, ph_list[i].ph);
		i = (i + 1) & (PH_SIZE - 1);
		if (((i ^ ph_ptr) & 7) == 0)
			printk("\n");
	} while (i != ph_ptr);
	if ((i ^ ph_ptr) & 7)
		printk("\n");

	i = cmd_ptr;
	printk(KERN_ERR "FAS216 commands: ");
	do {
		printk("%02x:%p ", cmd_list[i].command, cmd_list[i].from);
		i = (i + 1) & 7;
	} while (i != cmd_ptr);
	printk("\n");
}

static void fas216_done(FAS216_Info *info, unsigned int result);

/**
 * fas216_get_last_msg - retrive last message from the list
 * @info: interface to search
 * @pos: current fifo position
 *
 * Retrieve a last message from the list, using position in fifo.
 */
static inline unsigned short
fas216_get_last_msg(FAS216_Info *info, int pos)
{
	unsigned short packed_msg = NOP;
	struct message *msg;
	int msgnr = 0;

	while ((msg = msgqueue_getmsg(&info->scsi.msgs, msgnr++)) != NULL) {
		if (pos >= msg->fifo)
			break;
	}

	if (msg) {
		if (msg->msg[0] == EXTENDED_MESSAGE)
			packed_msg = EXTENDED_MESSAGE | msg->msg[2] << 8;
		else
			packed_msg = msg->msg[0];
	}

	fas216_log(info, LOG_MESSAGES,
		"Message: %04x found at position %02x\n", packed_msg, pos);

	return packed_msg;
}

/**
 * fas216_syncperiod - calculate STP register value
 * @info: state structure for interface connected to device
 * @ns: period in ns (between subsequent bytes)
 *
 * Calculate value to be loaded into the STP register for a given period
 * in ns. Returns a value suitable for REG_STP.
 */
static int fas216_syncperiod(FAS216_Info *info, int ns)
{
	int value = (info->ifcfg.clockrate * ns) / 1000;

	fas216_checkmagic(info);

	if (value < 4)
		value = 4;
	else if (value > 35)
		value = 35;

	return value & 31;
}

/**
 * fas216_set_sync - setup FAS216 chip for specified transfer period.
 * @info: state structure for interface connected to device
 * @target: target
 *
 * Correctly setup FAS216 chip for specified transfer period.
 * Notes   : we need to switch the chip out of FASTSCSI mode if we have
 *           a transfer period >= 200ns - otherwise the chip will violate
 *           the SCSI timings.
 */
static void fas216_set_sync(FAS216_Info *info, int target)
{
	unsigned int cntl3;

	fas216_writeb(info, REG_SOF, info->device[target].sof);
	fas216_writeb(info, REG_STP, info->device[target].stp);

	cntl3 = info->scsi.cfg[2];
	if (info->device[target].period >= (200 / 4))
		cntl3 = cntl3 & ~CNTL3_FASTSCSI;

	fas216_writeb(info, REG_CNTL3, cntl3);
}

/* Synchronous transfer support
 *
 * Note: The SCSI II r10 spec says (5.6.12):
 *
 *  (2)  Due to historical problems with early host adapters that could
 *  not accept an SDTR message, some targets may not initiate synchronous
 *  negotiation after a power cycle as required by this standard.  Host
 *  adapters that support synchronous mode may avoid the ensuing failure
 *  modes when the target is independently power cycled by initiating a
 *  synchronous negotiation on each REQUEST SENSE and INQUIRY command.
 *  This approach increases the SCSI bus overhead and is not recommended
 *  for new implementations.  The correct method is to respond to an
 *  SDTR message with a MESSAGE REJECT message if the either the
 *  initiator or target devices does not support synchronous transfers
 *  or does not want to negotiate for synchronous transfers at the time.
 *  Using the correct method assures compatibility with wide data
 *  transfers and future enhancements.
 *
 * We will always initiate a synchronous transfer negotiation request on
 * every INQUIRY or REQUEST SENSE message, unless the target itself has
 * at some point performed a synchronous transfer negotiation request, or
 * we have synchronous transfers disabled for this device.
 */

/**
 * fas216_handlesync - Handle a synchronous transfer message
 * @info: state structure for interface
 * @msg: message from target
 *
 * Handle a synchronous transfer message from the target
 */
static void fas216_handlesync(FAS216_Info *info, char *msg)
{
	struct fas216_device *dev = &info->device[info->SCpnt->device->id];
	enum { sync, async, none, reject } res = none;

#ifdef SCSI2_SYNC
	switch (msg[0]) {
	case MESSAGE_REJECT:
		/* Synchronous transfer request failed.
		 * Note: SCSI II r10:
		 *
		 *  SCSI devices that are capable of synchronous
		 *  data transfers shall not respond to an SDTR
		 *  message with a MESSAGE REJECT message.
		 *
		 * Hence, if we get this condition, we disable
		 * negotiation for this device.
		 */
		if (dev->sync_state == neg_inprogress) {
			dev->sync_state = neg_invalid;
			res = async;
		}
		break;

	case EXTENDED_MESSAGE:
		switch (dev->sync_state) {
		/* We don't accept synchronous transfer requests.
		 * Respond with a MESSAGE_REJECT to prevent a
		 * synchronous transfer agreement from being reached.
		 */
		case neg_invalid:
			res = reject;
			break;

		/* We were not negotiating a synchronous transfer,
		 * but the device sent us a negotiation request.
		 * Honour the request by sending back a SDTR
		 * message containing our capability, limited by
		 * the targets capability.
		 */
		default:
			fas216_cmd(info, CMD_SETATN);
			if (msg[4] > info->ifcfg.sync_max_depth)
				msg[4] = info->ifcfg.sync_max_depth;
			if (msg[3] < 1000 / info->ifcfg.clockrate)
				msg[3] = 1000 / info->ifcfg.clockrate;

			msgqueue_flush(&info->scsi.msgs);
			msgqueue_addmsg(&info->scsi.msgs, 5,
					EXTENDED_MESSAGE, 3, EXTENDED_SDTR,
					msg[3], msg[4]);
			info->scsi.phase = PHASE_MSGOUT_EXPECT;

			/* This is wrong.  The agreement is not in effect
			 * until this message is accepted by the device
			 */
			dev->sync_state = neg_targcomplete;
			res = sync;
			break;

		/* We initiated the synchronous transfer negotiation,
		 * and have successfully received a response from the
		 * target.  The synchronous transfer agreement has been
		 * reached.  Note: if the values returned are out of our
		 * bounds, we must reject the message.
		 */
		case neg_inprogress:
			res = reject;
			if (msg[4] <= info->ifcfg.sync_max_depth &&
			    msg[3] >= 1000 / info->ifcfg.clockrate) {
				dev->sync_state = neg_complete;
				res = sync;
			}
			break;
		}
	}
#else
	res = reject;
#endif

	switch (res) {
	case sync:
		dev->period = msg[3];
		dev->sof    = msg[4];
		dev->stp    = fas216_syncperiod(info, msg[3] * 4);
		fas216_set_sync(info, info->SCpnt->device->id);
		break;

	case reject:
		fas216_cmd(info, CMD_SETATN);
		msgqueue_flush(&info->scsi.msgs);
		msgqueue_addmsg(&info->scsi.msgs, 1, MESSAGE_REJECT);
		info->scsi.phase = PHASE_MSGOUT_EXPECT;

	case async:
		dev->period = info->ifcfg.asyncperiod / 4;
		dev->sof    = 0;
		dev->stp    = info->scsi.async_stp;
		fas216_set_sync(info, info->SCpnt->device->id);
		break;

	case none:
		break;
	}
}

/**
 * fas216_updateptrs - update data pointers after transfer suspended/paused
 * @info: interface's local pointer to update
 * @bytes_transferred: number of bytes transferred
 *
 * Update data pointers after transfer suspended/paused
 */
static void fas216_updateptrs(FAS216_Info *info, int bytes_transferred)
{
	struct scsi_pointer *SCp = &info->scsi.SCp;

	fas216_checkmagic(info);

	BUG_ON(bytes_transferred < 0);

	SCp->phase -= bytes_transferred;

	while (bytes_transferred != 0) {
		if (SCp->this_residual > bytes_transferred)
			break;
		/*
		 * We have used up this buffer.  Move on to the
		 * next buffer.
		 */
		bytes_transferred -= SCp->this_residual;
		if (!next_SCp(SCp) && bytes_transferred) {
			printk(KERN_WARNING "scsi%d.%c: out of buffers\n",
				info->host->host_no, '0' + info->SCpnt->device->id);
			return;
		}
	}

	SCp->this_residual -= bytes_transferred;
	if (SCp->this_residual)
		SCp->ptr += bytes_transferred;
	else
		SCp->ptr = NULL;
}

/**
 * fas216_pio - transfer data off of/on to card using programmed IO
 * @info: interface to transfer data to/from
 * @direction: direction to transfer data (DMA_OUT/DMA_IN)
 *
 * Transfer data off of/on to card using programmed IO.
 * Notes: this is incredibly slow.
 */
static void fas216_pio(FAS216_Info *info, fasdmadir_t direction)
{
	struct scsi_pointer *SCp = &info->scsi.SCp;

	fas216_checkmagic(info);

	if (direction == DMA_OUT)
		fas216_writeb(info, REG_FF, get_next_SCp_byte(SCp));
	else
		put_next_SCp_byte(SCp, fas216_readb(info, REG_FF));

	if (SCp->this_residual == 0)
		next_SCp(SCp);
}

static void fas216_set_stc(FAS216_Info *info, unsigned int length)
{
	fas216_writeb(info, REG_STCL, length);
	fas216_writeb(info, REG_STCM, length >> 8);
	fas216_writeb(info, REG_STCH, length >> 16);
}

static unsigned int fas216_get_ctc(FAS216_Info *info)
{
	return fas216_readb(info, REG_CTCL) +
	       (fas216_readb(info, REG_CTCM) << 8) +
	       (fas216_readb(info, REG_CTCH) << 16);
}

/**
 * fas216_cleanuptransfer - clean up after a transfer has completed.
 * @info: interface to clean up
 *
 * Update the data pointers according to the number of bytes transferred
 * on the SCSI bus.
 */
static void fas216_cleanuptransfer(FAS216_Info *info)
{
	unsigned long total, residual, fifo;
	fasdmatype_t dmatype = info->dma.transfer_type;

	info->dma.transfer_type = fasdma_none;

	/*
	 * PIO transfers do not need to be cleaned up.
	 */
	if (dmatype == fasdma_pio || dmatype == fasdma_none)
		return;

	if (dmatype == fasdma_real_all)
		total = info->scsi.SCp.phase;
	else
		total = info->scsi.SCp.this_residual;

	residual = fas216_get_ctc(info);

	fifo = fas216_readb(info, REG_CFIS) & CFIS_CF;

	fas216_log(info, LOG_BUFFER, "cleaning up from previous "
		   "transfer: length 0x%06x, residual 0x%x, fifo %d",
		   total, residual, fifo);

	/*
	 * If we were performing Data-Out, the transfer counter
	 * counts down each time a byte is transferred by the
	 * host to the FIFO.  This means we must include the
	 * bytes left in the FIFO from the transfer counter.
	 */
	if (info->scsi.phase == PHASE_DATAOUT)
		residual += fifo;

	fas216_updateptrs(info, total - residual);
}

/**
 * fas216_transfer - Perform a DMA/PIO transfer off of/on to card
 * @info: interface from which device disconnected from
 *
 * Start a DMA/PIO transfer off of/on to card
 */
static void fas216_transfer(FAS216_Info *info)
{
	fasdmadir_t direction;
	fasdmatype_t dmatype;

	fas216_log(info, LOG_BUFFER,
		   "starttransfer: buffer %p length 0x%06x reqlen 0x%06x",
		   info->scsi.SCp.ptr, info->scsi.SCp.this_residual,
		   info->scsi.SCp.phase);

	if (!info->scsi.SCp.ptr) {
		fas216_log(info, LOG_ERROR, "null buffer passed to "
			   "fas216_starttransfer");
		print_SCp(&info->scsi.SCp, "SCp: ", "\n");
		print_SCp(&info->SCpnt->SCp, "Cmnd SCp: ", "\n");
		return;
	}

	/*
	 * If we have a synchronous transfer agreement in effect, we must
	 * use DMA mode.  If we are using asynchronous transfers, we may
	 * use DMA mode or PIO mode.
	 */
	if (info->device[info->SCpnt->device->id].sof)
		dmatype = fasdma_real_all;
	else
		dmatype = fasdma_pio;

	if (info->scsi.phase == PHASE_DATAOUT)
		direction = DMA_OUT;
	else
		direction = DMA_IN;

	if (info->dma.setup)
		dmatype = info->dma.setup(info->host, &info->scsi.SCp,
					  direction, dmatype);
	info->dma.transfer_type = dmatype;

	if (dmatype == fasdma_real_all)
		fas216_set_stc(info, info->scsi.SCp.phase);
	else
		fas216_set_stc(info, info->scsi.SCp.this_residual);

	switch (dmatype) {
	case fasdma_pio:
		fas216_log(info, LOG_BUFFER, "PIO transfer");
		fas216_writeb(info, REG_SOF, 0);
		fas216_writeb(info, REG_STP, info->scsi.async_stp);
		fas216_cmd(info, CMD_TRANSFERINFO);
		fas216_pio(info, direction);
		break;

	case fasdma_pseudo:
		fas216_log(info, LOG_BUFFER, "pseudo transfer");
		fas216_cmd(info, CMD_TRANSFERINFO | CMD_WITHDMA);
		info->dma.pseudo(info->host, &info->scsi.SCp,
				 direction, info->SCpnt->transfersize);
		break;

	case fasdma_real_block:
		fas216_log(info, LOG_BUFFER, "block dma transfer");
		fas216_cmd(info, CMD_TRANSFERINFO | CMD_WITHDMA);
		break;

	case fasdma_real_all:
		fas216_log(info, LOG_BUFFER, "total dma transfer");
		fas216_cmd(info, CMD_TRANSFERINFO | CMD_WITHDMA);
		break;

	default:
		fas216_log(info, LOG_BUFFER | LOG_ERROR,
			   "invalid FAS216 DMA type");
		break;
	}
}

/**
 * fas216_stoptransfer - Stop a DMA transfer onto / off of the card
 * @info: interface from which device disconnected from
 *
 * Called when we switch away from DATA IN or DATA OUT phases.
 */
static void fas216_stoptransfer(FAS216_Info *info)
{
	fas216_checkmagic(info);

	if (info->dma.transfer_type == fasdma_real_all ||
	    info->dma.transfer_type == fasdma_real_block)
		info->dma.stop(info->host, &info->scsi.SCp);

	fas216_cleanuptransfer(info);

	if (info->scsi.phase == PHASE_DATAIN) {
		unsigned int fifo;

		/*
		 * If we were performing Data-In, then the FIFO counter
		 * contains the number of bytes not transferred via DMA
		 * from the on-board FIFO.  Read them manually.
		 */
		fifo = fas216_readb(info, REG_CFIS) & CFIS_CF;
		while (fifo && info->scsi.SCp.ptr) {
			*info->scsi.SCp.ptr = fas216_readb(info, REG_FF);
			fas216_updateptrs(info, 1);
			fifo--;
		}
	} else {
		/*
		 * After a Data-Out phase, there may be unsent
		 * bytes left in the FIFO.  Flush them out.
		 */
		fas216_cmd(info, CMD_FLUSHFIFO);
	}
}

static void fas216_aborttransfer(FAS216_Info *info)
{
	fas216_checkmagic(info);

	if (info->dma.transfer_type == fasdma_real_all ||
	    info->dma.transfer_type == fasdma_real_block)
		info->dma.stop(info->host, &info->scsi.SCp);

	info->dma.transfer_type = fasdma_none;
	fas216_cmd(info, CMD_FLUSHFIFO);
}

static void fas216_kick(FAS216_Info *info);

/**
 * fas216_disconnected_intr - handle device disconnection
 * @info: interface from which device disconnected from
 *
 * Handle device disconnection
 */
static void fas216_disconnect_intr(FAS216_Info *info)
{
	unsigned long flags;

	fas216_checkmagic(info);

	fas216_log(info, LOG_CONNECT, "disconnect phase=%02x",
		   info->scsi.phase);

	msgqueue_flush(&info->scsi.msgs);

	switch (info->scsi.phase) {
	case PHASE_SELECTION:			/* while selecting - no target		*/
	case PHASE_SELSTEPS:
		fas216_done(info, DID_NO_CONNECT);
		break;

	case PHASE_MSGIN_DISCONNECT:		/* message in - disconnecting		*/
		info->scsi.disconnectable = 1;
		info->scsi.phase = PHASE_IDLE;
		info->stats.disconnects += 1;
		spin_lock_irqsave(&info->host_lock, flags);
		if (info->scsi.phase == PHASE_IDLE)
			fas216_kick(info);
		spin_unlock_irqrestore(&info->host_lock, flags);
		break;

	case PHASE_DONE:			/* at end of command - complete		*/
		fas216_done(info, DID_OK);
		break;

	case PHASE_MSGOUT:			/* message out - possible ABORT message	*/
		if (fas216_get_last_msg(info, info->scsi.msgin_fifo) == ABORT) {
			info->scsi.aborting = 0;
			fas216_done(info, DID_ABORT);
			break;
		}

	default:				/* huh?					*/
		printk(KERN_ERR "scsi%d.%c: unexpected disconnect in phase %s\n",
			info->host->host_no, fas216_target(info), fas216_drv_phase(info));
		print_debug_list();
		fas216_stoptransfer(info);
		fas216_done(info, DID_ERROR);
		break;
	}
}

/**
 * fas216_reselected_intr - start reconnection of a device
 * @info: interface which was reselected
 *
 * Start reconnection of a device
 */
static void
fas216_reselected_intr(FAS216_Info *info)
{
	unsigned int cfis, i;
	unsigned char msg[4];
	unsigned char target, lun, tag;

	fas216_checkmagic(info);

	WARN_ON(info->scsi.phase == PHASE_SELECTION ||
		info->scsi.phase == PHASE_SELSTEPS);

	cfis = fas216_readb(info, REG_CFIS);

	fas216_log(info, LOG_CONNECT, "reconnect phase=%02x cfis=%02x",
		   info->scsi.phase, cfis);

	cfis &= CFIS_CF;

	if (cfis < 2 || cfis > 4) {
		printk(KERN_ERR "scsi%d.H: incorrect number of bytes after reselect\n",
			info->host->host_no);
		goto bad_message;
	}

	for (i = 0; i < cfis; i++)
		msg[i] = fas216_readb(info, REG_FF);

	if (!(msg[0] & (1 << info->host->this_id)) ||
	    !(msg[1] & 0x80))
		goto initiator_error;

	target = msg[0] & ~(1 << info->host->this_id);
	target = ffs(target) - 1;
	lun = msg[1] & 7;
	tag = 0;

	if (cfis >= 3) {
		if (msg[2] != SIMPLE_QUEUE_TAG)
			goto initiator_error;

		tag = msg[3];
	}

	/* set up for synchronous transfers */
	fas216_writeb(info, REG_SDID, target);
	fas216_set_sync(info, target);
	msgqueue_flush(&info->scsi.msgs);

	fas216_log(info, LOG_CONNECT, "Reconnected: target %1x lun %1x tag %02x",
		   target, lun, tag);

	if (info->scsi.disconnectable && info->SCpnt) {
		info->scsi.disconnectable = 0;
		if (info->SCpnt->device->id  == target &&
		    info->SCpnt->device->lun == lun &&
		    info->SCpnt->tag         == tag) {
			fas216_log(info, LOG_CONNECT, "reconnected previously executing command");
		} else {
			queue_add_cmd_tail(&info->queues.disconnected, info->SCpnt);
			fas216_log(info, LOG_CONNECT, "had to move command to disconnected queue");
			info->SCpnt = NULL;
		}
	}
	if (!info->SCpnt) {
		info->SCpnt = queue_remove_tgtluntag(&info->queues.disconnected,
					target, lun, tag);
		fas216_log(info, LOG_CONNECT, "had to get command");
	}

	if (info->SCpnt) {
		/*
		 * Restore data pointer from SAVED data pointer
		 */
		info->scsi.SCp = info->SCpnt->SCp;

		fas216_log(info, LOG_CONNECT, "data pointers: [%p, %X]",
			info->scsi.SCp.ptr, info->scsi.SCp.this_residual);
		info->scsi.phase = PHASE_MSGIN;
	} else {
		/*
		 * Our command structure not found - abort the
		 * command on the target.  Since we have no
		 * record of this command, we can't send
		 * an INITIATOR DETECTED ERROR message.
		 */
		fas216_cmd(info, CMD_SETATN);

#if 0
		if (tag)
			msgqueue_addmsg(&info->scsi.msgs, 2, ABORT_TAG, tag);
		else
#endif
			msgqueue_addmsg(&info->scsi.msgs, 1, ABORT);
		info->scsi.phase = PHASE_MSGOUT_EXPECT;
		info->scsi.aborting = 1;
	}

	fas216_cmd(info, CMD_MSGACCEPTED);
	return;

 initiator_error:
	printk(KERN_ERR "scsi%d.H: error during reselection: bytes",
		info->host->host_no);
	for (i = 0; i < cfis; i++)
		printk(" %02x", msg[i]);
	printk("\n");
 bad_message:
	fas216_cmd(info, CMD_SETATN);
	msgqueue_flush(&info->scsi.msgs);
	msgqueue_addmsg(&info->scsi.msgs, 1, INITIATOR_ERROR);
	info->scsi.phase = PHASE_MSGOUT_EXPECT;
	fas216_cmd(info, CMD_MSGACCEPTED);
}

static void fas216_parse_message(FAS216_Info *info, unsigned char *message, int msglen)
{
	int i;

	switch (message[0]) {
	case COMMAND_COMPLETE:
		if (msglen != 1)
			goto unrecognised;

		printk(KERN_ERR "scsi%d.%c: command complete with no "
			"status in MESSAGE_IN?\n",
			info->host->host_no, fas216_target(info));
		break;

	case SAVE_POINTERS:
		if (msglen != 1)
			goto unrecognised;

		/*
		 * Save current data pointer to SAVED data pointer
		 * SCSI II standard says that we must not acknowledge
		 * this until we have really saved pointers.
		 * NOTE: we DO NOT save the command nor status pointers
		 * as required by the SCSI II standard.  These always
		 * point to the start of their respective areas.
		 */
		info->SCpnt->SCp = info->scsi.SCp;
		info->SCpnt->SCp.sent_command = 0;
		fas216_log(info, LOG_CONNECT | LOG_MESSAGES | LOG_BUFFER,
			"save data pointers: [%p, %X]",
			info->scsi.SCp.ptr, info->scsi.SCp.this_residual);
		break;

	case RESTORE_POINTERS:
		if (msglen != 1)
			goto unrecognised;

		/*
		 * Restore current data pointer from SAVED data pointer
		 */
		info->scsi.SCp = info->SCpnt->SCp;
		fas216_log(info, LOG_CONNECT | LOG_MESSAGES | LOG_BUFFER,
			"restore data pointers: [%p, 0x%x]",
			info->scsi.SCp.ptr, info->scsi.SCp.this_residual);
		break;

	case DISCONNECT:
		if (msglen != 1)
			goto unrecognised;

		info->scsi.phase = PHASE_MSGIN_DISCONNECT;
		break;

	case MESSAGE_REJECT:
		if (msglen != 1)
			goto unrecognised;

		switch (fas216_get_last_msg(info, info->scsi.msgin_fifo)) {
		case EXTENDED_MESSAGE | EXTENDED_SDTR << 8:
			fas216_handlesync(info, message);
			break;

		default:
			fas216_log(info, 0, "reject, last message 0x%04x",
				fas216_get_last_msg(info, info->scsi.msgin_fifo));
		}
		break;

	case NOP:
		break;

	case EXTENDED_MESSAGE:
		if (msglen < 3)
			goto unrecognised;

		switch (message[2]) {
		case EXTENDED_SDTR:	/* Sync transfer negotiation request/reply */
			fas216_handlesync(info, message);
			break;

		default:
			goto unrecognised;
		}
		break;

	default:
		goto unrecognised;
	}
	return;

unrecognised:
	fas216_log(info, 0, "unrecognised message, rejecting");
	printk("scsi%d.%c: message was", info->host->host_no, fas216_target(info));
	for (i = 0; i < msglen; i++)
		printk("%s%02X", i & 31 ? " " : "\n  ", message[i]);
	printk("\n");

	/*
	 * Something strange seems to be happening here -
	 * I can't use SETATN since the chip gives me an
	 * invalid command interrupt when I do.  Weird.
	 */
fas216_cmd(info, CMD_NOP);
fas216_dumpstate(info);
	fas216_cmd(info, CMD_SETATN);
	msgqueue_flush(&info->scsi.msgs);
	msgqueue_addmsg(&info->scsi.msgs, 1, MESSAGE_REJECT);
	info->scsi.phase = PHASE_MSGOUT_EXPECT;
fas216_dumpstate(info);
}

static int fas216_wait_cmd(FAS216_Info *info, int cmd)
{
	int tout;
	int stat;

	fas216_cmd(info, cmd);

	for (tout = 1000; tout; tout -= 1) {
		stat = fas216_readb(info, REG_STAT);
		if (stat & (STAT_INT|STAT_PARITYERROR))
			break;
		udelay(1);
	}

	return stat;
}

static int fas216_get_msg_byte(FAS216_Info *info)
{
	unsigned int stat = fas216_wait_cmd(info, CMD_MSGACCEPTED);

	if ((stat & STAT_INT) == 0)
		goto timedout;

	if ((stat & STAT_BUSMASK) != STAT_MESGIN)
		goto unexpected_phase_change;

	fas216_readb(info, REG_INST);

	stat = fas216_wait_cmd(info, CMD_TRANSFERINFO);

	if ((stat & STAT_INT) == 0)
		goto timedout;

	if (stat & STAT_PARITYERROR)
		goto parity_error;

	if ((stat & STAT_BUSMASK) != STAT_MESGIN)
		goto unexpected_phase_change;

	fas216_readb(info, REG_INST);

	return fas216_readb(info, REG_FF);

timedout:
	fas216_log(info, LOG_ERROR, "timed out waiting for message byte");
	return -1;

unexpected_phase_change:
	fas216_log(info, LOG_ERROR, "unexpected phase change: status = %02x", stat);
	return -2;

parity_error:
	fas216_log(info, LOG_ERROR, "parity error during message in phase");
	return -3;
}

/**
 * fas216_message - handle a function done interrupt from FAS216 chip
 * @info: interface which caused function done interrupt
 *
 * Handle a function done interrupt from FAS216 chip
 */
static void fas216_message(FAS216_Info *info)
{
	unsigned char *message = info->scsi.message;
	unsigned int msglen = 1;
	int msgbyte = 0;

	fas216_checkmagic(info);

	message[0] = fas216_readb(info, REG_FF);

	if (message[0] == EXTENDED_MESSAGE) {
		msgbyte = fas216_get_msg_byte(info);

		if (msgbyte >= 0) {
			message[1] = msgbyte;

			for (msglen = 2; msglen < message[1] + 2; msglen++) {
				msgbyte = fas216_get_msg_byte(info);

				if (msgbyte >= 0)
					message[msglen] = msgbyte;
				else
					break;
			}
		}
	}

	if (msgbyte == -3)
		goto parity_error;

#ifdef DEBUG_MESSAGES
	{
		int i;

		printk("scsi%d.%c: message in: ",
			info->host->host_no, fas216_target(info));
		for (i = 0; i < msglen; i++)
			printk("%02X ", message[i]);
		printk("\n");
	}
#endif

	fas216_parse_message(info, message, msglen);
	fas216_cmd(info, CMD_MSGACCEPTED);
	return;

parity_error:
	fas216_cmd(info, CMD_SETATN);
	msgqueue_flush(&info->scsi.msgs);
	msgqueue_addmsg(&info->scsi.msgs, 1, MSG_PARITY_ERROR);
	info->scsi.phase = PHASE_MSGOUT_EXPECT;
	fas216_cmd(info, CMD_MSGACCEPTED);
	return;
}

/**
 * fas216_send_command - send command after all message bytes have been sent
 * @info: interface which caused bus service
 *
 * Send a command to a target after all message bytes have been sent
 */
static void fas216_send_command(FAS216_Info *info)
{
	int i;

	fas216_checkmagic(info);

	fas216_cmd(info, CMD_NOP|CMD_WITHDMA);
	fas216_cmd(info, CMD_FLUSHFIFO);

	/* load command */
	for (i = info->scsi.SCp.sent_command; i < info->SCpnt->cmd_len; i++)
		fas216_writeb(info, REG_FF, info->SCpnt->cmnd[i]);

	fas216_cmd(info, CMD_TRANSFERINFO);

	info->scsi.phase = PHASE_COMMAND;
}

/**
 * fas216_send_messageout - handle bus service to send a message
 * @info: interface which caused bus service
 *
 * Handle bus service to send a message.
 * Note: We do not allow the device to change the data direction!
 */
static void fas216_send_messageout(FAS216_Info *info, int start)
{
	unsigned int tot_msglen = msgqueue_msglength(&info->scsi.msgs);

	fas216_checkmagic(info);

	fas216_cmd(info, CMD_FLUSHFIFO);

	if (tot_msglen) {
		struct message *msg;
		int msgnr = 0;

		while ((msg = msgqueue_getmsg(&info->scsi.msgs, msgnr++)) != NULL) {
			int i;

			for (i = start; i < msg->length; i++)
				fas216_writeb(info, REG_FF, msg->msg[i]);

			msg->fifo = tot_msglen - (fas216_readb(info, REG_CFIS) & CFIS_CF);
			start = 0;
		}
	} else
		fas216_writeb(info, REG_FF, NOP);

	fas216_cmd(info, CMD_TRANSFERINFO);

	info->scsi.phase = PHASE_MSGOUT;
}

/**
 * fas216_busservice_intr - handle bus service interrupt from FAS216 chip
 * @info: interface which caused bus service interrupt
 * @stat: Status register contents
 * @is: SCSI Status register contents
 *
 * Handle a bus service interrupt from FAS216 chip
 */
static void fas216_busservice_intr(FAS216_Info *info, unsigned int stat, unsigned int is)
{
	fas216_checkmagic(info);

	fas216_log(info, LOG_BUSSERVICE,
		   "bus service: stat=%02x is=%02x phase=%02x",
		   stat, is, info->scsi.phase);

	switch (info->scsi.phase) {
	case PHASE_SELECTION:
		if ((is & IS_BITS) != IS_MSGBYTESENT)
			goto bad_is;
		break;

	case PHASE_SELSTEPS:
		switch (is & IS_BITS) {
		case IS_SELARB:
		case IS_MSGBYTESENT:
			goto bad_is;

		case IS_NOTCOMMAND:
		case IS_EARLYPHASE:
			if ((stat & STAT_BUSMASK) == STAT_MESGIN)
				break;
			goto bad_is;

		case IS_COMPLETE:
			break;
		}

	default:
		break;
	}

	fas216_cmd(info, CMD_NOP);

#define STATE(st,ph) ((ph) << 3 | (st))
	/* This table describes the legal SCSI state transitions,
	 * as described by the SCSI II spec.
	 */
	switch (STATE(stat & STAT_BUSMASK, info->scsi.phase)) {
	case STATE(STAT_DATAIN, PHASE_SELSTEPS):/* Sel w/ steps -> Data In      */
	case STATE(STAT_DATAIN, PHASE_MSGOUT):  /* Message Out  -> Data In      */
	case STATE(STAT_DATAIN, PHASE_COMMAND): /* Command      -> Data In      */
	case STATE(STAT_DATAIN, PHASE_MSGIN):   /* Message In   -> Data In      */
		info->scsi.phase = PHASE_DATAIN;
		fas216_transfer(info);
		return;

	case STATE(STAT_DATAIN, PHASE_DATAIN):  /* Data In      -> Data In      */
	case STATE(STAT_DATAOUT, PHASE_DATAOUT):/* Data Out     -> Data Out     */
		fas216_cleanuptransfer(info);
		fas216_transfer(info);
		return;

	case STATE(STAT_DATAOUT, PHASE_SELSTEPS):/* Sel w/ steps-> Data Out     */
	case STATE(STAT_DATAOUT, PHASE_MSGOUT): /* Message Out  -> Data Out     */
	case STATE(STAT_DATAOUT, PHASE_COMMAND):/* Command      -> Data Out     */
	case STATE(STAT_DATAOUT, PHASE_MSGIN):  /* Message In   -> Data Out     */
		fas216_cmd(info, CMD_FLUSHFIFO);
		info->scsi.phase = PHASE_DATAOUT;
		fas216_transfer(info);
		return;

	case STATE(STAT_STATUS, PHASE_DATAOUT): /* Data Out     -> Status       */
	case STATE(STAT_STATUS, PHASE_DATAIN):  /* Data In      -> Status       */
		fas216_stoptransfer(info);
	case STATE(STAT_STATUS, PHASE_SELSTEPS):/* Sel w/ steps -> Status       */
	case STATE(STAT_STATUS, PHASE_MSGOUT):  /* Message Out  -> Status       */
	case STATE(STAT_STATUS, PHASE_COMMAND): /* Command      -> Status       */
	case STATE(STAT_STATUS, PHASE_MSGIN):   /* Message In   -> Status       */
		fas216_cmd(info, CMD_INITCMDCOMPLETE);
		info->scsi.phase = PHASE_STATUS;
		return;

	case STATE(STAT_MESGIN, PHASE_DATAOUT): /* Data Out     -> Message In   */
	case STATE(STAT_MESGIN, PHASE_DATAIN):  /* Data In      -> Message In   */
		fas216_stoptransfer(info);
	case STATE(STAT_MESGIN, PHASE_COMMAND):	/* Command	-> Message In	*/
	case STATE(STAT_MESGIN, PHASE_SELSTEPS):/* Sel w/ steps -> Message In   */
	case STATE(STAT_MESGIN, PHASE_MSGOUT):  /* Message Out  -> Message In   */
		info->scsi.msgin_fifo = fas216_readb(info, REG_CFIS) & CFIS_CF;
		fas216_cmd(info, CMD_FLUSHFIFO);
		fas216_cmd(info, CMD_TRANSFERINFO);
		info->scsi.phase = PHASE_MSGIN;
		return;

	case STATE(STAT_MESGIN, PHASE_MSGIN):
		info->scsi.msgin_fifo = fas216_readb(info, REG_CFIS) & CFIS_CF;
		fas216_cmd(info, CMD_TRANSFERINFO);
		return;

	case STATE(STAT_COMMAND, PHASE_MSGOUT): /* Message Out  -> Command      */
	case STATE(STAT_COMMAND, PHASE_MSGIN):  /* Message In   -> Command      */
		fas216_send_command(info);
		info->scsi.phase = PHASE_COMMAND;
		return;


	/*
	 * Selection    -> Message Out
	 */
	case STATE(STAT_MESGOUT, PHASE_SELECTION):
		fas216_send_messageout(info, 1);
		return;

	/*
	 * Message Out  -> Message Out
	 */
	case STATE(STAT_MESGOUT, PHASE_SELSTEPS):
	case STATE(STAT_MESGOUT, PHASE_MSGOUT):
		/*
		 * If we get another message out phase, this usually
		 * means some parity error occurred.  Resend complete
		 * set of messages.  If we have more than one byte to
		 * send, we need to assert ATN again.
		 */
		if (info->device[info->SCpnt->device->id].parity_check) {
			/*
			 * We were testing... good, the device
			 * supports parity checking.
			 */
			info->device[info->SCpnt->device->id].parity_check = 0;
			info->device[info->SCpnt->device->id].parity_enabled = 1;
			fas216_writeb(info, REG_CNTL1, info->scsi.cfg[0]);
		}

		if (msgqueue_msglength(&info->scsi.msgs) > 1)
			fas216_cmd(info, CMD_SETATN);
		/*FALLTHROUGH*/

	/*
	 * Any          -> Message Out
	 */
	case STATE(STAT_MESGOUT, PHASE_MSGOUT_EXPECT):
		fas216_send_messageout(info, 0);
		return;

	/* Error recovery rules.
	 *   These either attempt to abort or retry the operation.
	 * TODO: we need more of these
	 */
	case STATE(STAT_COMMAND, PHASE_COMMAND):/* Command      -> Command      */
		/* error - we've sent out all the command bytes
		 * we have.
		 * NOTE: we need SAVE DATA POINTERS/RESTORE DATA POINTERS
		 * to include the command bytes sent for this to work
		 * correctly.
		 */
		printk(KERN_ERR "scsi%d.%c: "
			"target trying to receive more command bytes\n",
			info->host->host_no, fas216_target(info));
		fas216_cmd(info, CMD_SETATN);
		fas216_set_stc(info, 15);
		fas216_cmd(info, CMD_PADBYTES | CMD_WITHDMA);
		msgqueue_flush(&info->scsi.msgs);
		msgqueue_addmsg(&info->scsi.msgs, 1, INITIATOR_ERROR);
		info->scsi.phase = PHASE_MSGOUT_EXPECT;
		return;
	}

	if (info->scsi.phase == PHASE_MSGIN_DISCONNECT) {
		printk(KERN_ERR "scsi%d.%c: disconnect message received, but bus service %s?\n",
			info->host->host_no, fas216_target(info),
			fas216_bus_phase(stat));
		msgqueue_flush(&info->scsi.msgs);
		fas216_cmd(info, CMD_SETATN);
		msgqueue_addmsg(&info->scsi.msgs, 1, INITIATOR_ERROR);
		info->scsi.phase = PHASE_MSGOUT_EXPECT;
		info->scsi.aborting = 1;
		fas216_cmd(info, CMD_TRANSFERINFO);
		return;
	}
	printk(KERN_ERR "scsi%d.%c: bus phase %s after %s?\n",
		info->host->host_no, fas216_target(info),
		fas216_bus_phase(stat),
		fas216_drv_phase(info));
	print_debug_list();
	return;

bad_is:
	fas216_log(info, 0, "bus service at step %d?", is & IS_BITS);
	fas216_dumpstate(info);
	print_debug_list();

	fas216_done(info, DID_ERROR);
}

/**
 * fas216_funcdone_intr - handle a function done interrupt from FAS216 chip
 * @info: interface which caused function done interrupt
 * @stat: Status register contents
 * @is: SCSI Status register contents
 *
 * Handle a function done interrupt from FAS216 chip
 */
static void fas216_funcdone_intr(FAS216_Info *info, unsigned int stat, unsigned int is)
{
	unsigned int fifo_len = fas216_readb(info, REG_CFIS) & CFIS_CF;

	fas216_checkmagic(info);

	fas216_log(info, LOG_FUNCTIONDONE,
		   "function done: stat=%02x is=%02x phase=%02x",
		   stat, is, info->scsi.phase);

	switch (info->scsi.phase) {
	case PHASE_STATUS:			/* status phase - read status and msg	*/
		if (fifo_len != 2) {
			fas216_log(info, 0, "odd number of bytes in FIFO: %d", fifo_len);
		}
		/*
		 * Read status then message byte.
		 */
		info->scsi.SCp.Status = fas216_readb(info, REG_FF);
		info->scsi.SCp.Message = fas216_readb(info, REG_FF);
		info->scsi.phase = PHASE_DONE;
		fas216_cmd(info, CMD_MSGACCEPTED);
		break;

	case PHASE_IDLE:
	case PHASE_SELECTION:
	case PHASE_SELSTEPS:
		break;

	case PHASE_MSGIN:			/* message in phase			*/
		if ((stat & STAT_BUSMASK) == STAT_MESGIN) {
			info->scsi.msgin_fifo = fifo_len;
			fas216_message(info);
			break;
		}

	default:
		fas216_log(info, 0, "internal phase %s for function done?"
			"  What do I do with this?",
			fas216_target(info), fas216_drv_phase(info));
	}
}

static void fas216_bus_reset(FAS216_Info *info)
{
	neg_t sync_state;
	int i;

	msgqueue_flush(&info->scsi.msgs);

	sync_state = neg_invalid;

#ifdef SCSI2_SYNC
	if (info->ifcfg.capabilities & (FASCAP_DMA|FASCAP_PSEUDODMA))
		sync_state = neg_wait;
#endif

	info->scsi.phase = PHASE_IDLE;
	info->SCpnt = NULL; /* bug! */
	memset(&info->scsi.SCp, 0, sizeof(info->scsi.SCp));

	for (i = 0; i < 8; i++) {
		info->device[i].disconnect_ok	= info->ifcfg.disconnect_ok;
		info->device[i].sync_state	= sync_state;
		info->device[i].period		= info->ifcfg.asyncperiod / 4;
		info->device[i].stp		= info->scsi.async_stp;
		info->device[i].sof		= 0;
		info->device[i].wide_xfer	= 0;
	}

	info->rst_bus_status = 1;
	wake_up(&info->eh_wait);
}

/**
 * fas216_intr - handle interrupts to progress a command
 * @info: interface to service
 *
 * Handle interrupts from the interface to progress a command
 */
irqreturn_t fas216_intr(FAS216_Info *info)
{
	unsigned char inst, is, stat;
	int handled = IRQ_NONE;

	fas216_checkmagic(info);

	stat = fas216_readb(info, REG_STAT);
	is = fas216_readb(info, REG_IS);
	inst = fas216_readb(info, REG_INST);

	add_debug_list(stat, is, inst, info->scsi.phase);

	if (stat & STAT_INT) {
		if (inst & INST_BUSRESET) {
			fas216_log(info, 0, "bus reset detected");
			fas216_bus_reset(info);
			scsi_report_bus_reset(info->host, 0);
		} else if (inst & INST_ILLEGALCMD) {
			fas216_log(info, LOG_ERROR, "illegal command given\n");
			fas216_dumpstate(info);
			print_debug_list();
		} else if (inst & INST_DISCONNECT)
			fas216_disconnect_intr(info);
		else if (inst & INST_RESELECTED)	/* reselected			*/
			fas216_reselected_intr(info);
		else if (inst & INST_BUSSERVICE)	/* bus service request		*/
			fas216_busservice_intr(info, stat, is);
		else if (inst & INST_FUNCDONE)		/* function done		*/
			fas216_funcdone_intr(info, stat, is);
		else
		    	fas216_log(info, 0, "unknown interrupt received:"
				" phase %s inst %02X is %02X stat %02X",
				fas216_drv_phase(info), inst, is, stat);
		handled = IRQ_HANDLED;
	}
	return handled;
}

static void __fas216_start_command(FAS216_Info *info, struct scsi_cmnd *SCpnt)
{
	int tot_msglen;

	/* following what the ESP driver says */
	fas216_set_stc(info, 0);
	fas216_cmd(info, CMD_NOP | CMD_WITHDMA);

	/* flush FIFO */
	fas216_cmd(info, CMD_FLUSHFIFO);

	/* load bus-id and timeout */
	fas216_writeb(info, REG_SDID, BUSID(SCpnt->device->id));
	fas216_writeb(info, REG_STIM, info->ifcfg.select_timeout);

	/* synchronous transfers */
	fas216_set_sync(info, SCpnt->device->id);

	tot_msglen = msgqueue_msglength(&info->scsi.msgs);

#ifdef DEBUG_MESSAGES
	{
		struct message *msg;
		int msgnr = 0, i;

		printk("scsi%d.%c: message out: ",
			info->host->host_no, '0' + SCpnt->device->id);
		while ((msg = msgqueue_getmsg(&info->scsi.msgs, msgnr++)) != NULL) {
			printk("{ ");
			for (i = 0; i < msg->length; i++)
				printk("%02x ", msg->msg[i]);
			printk("} ");
		}
		printk("\n");
	}
#endif

	if (tot_msglen == 1 || tot_msglen == 3) {
		/*
		 * We have an easy message length to send...
		 */
		struct message *msg;
		int msgnr = 0, i;

		info->scsi.phase = PHASE_SELSTEPS;

		/* load message bytes */
		while ((msg = msgqueue_getmsg(&info->scsi.msgs, msgnr++)) != NULL) {
			for (i = 0; i < msg->length; i++)
				fas216_writeb(info, REG_FF, msg->msg[i]);
			msg->fifo = tot_msglen - (fas216_readb(info, REG_CFIS) & CFIS_CF);
		}

		/* load command */
		for (i = 0; i < SCpnt->cmd_len; i++)
			fas216_writeb(info, REG_FF, SCpnt->cmnd[i]);

		if (tot_msglen == 1)
			fas216_cmd(info, CMD_SELECTATN);
		else
			fas216_cmd(info, CMD_SELECTATN3);
	} else {
		/*
		 * We have an unusual number of message bytes to send.
		 *  Load first byte into fifo, and issue SELECT with ATN and
		 *  stop steps.
		 */
		struct message *msg = msgqueue_getmsg(&info->scsi.msgs, 0);

		fas216_writeb(info, REG_FF, msg->msg[0]);
		msg->fifo = 1;

		fas216_cmd(info, CMD_SELECTATNSTOP);
	}
}

/*
 * Decide whether we need to perform a parity test on this device.
 * Can also be used to force parity error conditions during initial
 * information transfer phase (message out) for test purposes.
 */
static int parity_test(FAS216_Info *info, int target)
{
#if 0
	if (target == 3) {
		info->device[target].parity_check = 0;
		return 1;
	}
#endif
	return info->device[target].parity_check;
}

static void fas216_start_command(FAS216_Info *info, struct scsi_cmnd *SCpnt)
{
	int disconnect_ok;

	/*
	 * claim host busy
	 */
	info->scsi.phase = PHASE_SELECTION;
	info->scsi.SCp = SCpnt->SCp;
	info->SCpnt = SCpnt;
	info->dma.transfer_type = fasdma_none;

	if (parity_test(info, SCpnt->device->id))
		fas216_writeb(info, REG_CNTL1, info->scsi.cfg[0] | CNTL1_PTE);
	else
		fas216_writeb(info, REG_CNTL1, info->scsi.cfg[0]);

	/*
	 * Don't allow request sense commands to disconnect.
	 */
	disconnect_ok = SCpnt->cmnd[0] != REQUEST_SENSE &&
			info->device[SCpnt->device->id].disconnect_ok;

	/*
	 * build outgoing message bytes
	 */
	msgqueue_flush(&info->scsi.msgs);
	msgqueue_addmsg(&info->scsi.msgs, 1, IDENTIFY(disconnect_ok, SCpnt->device->lun));

	/*
	 * add tag message if required
	 */
	if (SCpnt->tag)
		msgqueue_addmsg(&info->scsi.msgs, 2, SIMPLE_QUEUE_TAG, SCpnt->tag);

	do {
#ifdef SCSI2_SYNC
		if ((info->device[SCpnt->device->id].sync_state == neg_wait ||
		     info->device[SCpnt->device->id].sync_state == neg_complete) &&
		    (SCpnt->cmnd[0] == REQUEST_SENSE ||
		     SCpnt->cmnd[0] == INQUIRY)) {
			info->device[SCpnt->device->id].sync_state = neg_inprogress;
			msgqueue_addmsg(&info->scsi.msgs, 5,
					EXTENDED_MESSAGE, 3, EXTENDED_SDTR,
					1000 / info->ifcfg.clockrate,
					info->ifcfg.sync_max_depth);
			break;
		}
#endif
	} while (0);

	__fas216_start_command(info, SCpnt);
}

static void fas216_allocate_tag(FAS216_Info *info, struct scsi_cmnd *SCpnt)
{
#ifdef SCSI2_TAG
	/*
	 * tagged queuing - allocate a new tag to this command
	 */
	if (SCpnt->device->simple_tags && SCpnt->cmnd[0] != REQUEST_SENSE &&
	    SCpnt->cmnd[0] != INQUIRY) {
	    SCpnt->device->current_tag += 1;
		if (SCpnt->device->current_tag == 0)
		    SCpnt->device->current_tag = 1;
			SCpnt->tag = SCpnt->device->current_tag;
	} else
#endif
		set_bit(SCpnt->device->id * 8 +
			(u8)(SCpnt->device->lun & 0x7), info->busyluns);

	info->stats.removes += 1;
	switch (SCpnt->cmnd[0]) {
	case WRITE_6:
	case WRITE_10:
	case WRITE_12:
		info->stats.writes += 1;
		break;
	case READ_6:
	case READ_10:
	case READ_12:
		info->stats.reads += 1;
		break;
	default:
		info->stats.miscs += 1;
		break;
	}
}

static void fas216_do_bus_device_reset(FAS216_Info *info,
				       struct scsi_cmnd *SCpnt)
{
	struct message *msg;

	/*
	 * claim host busy
	 */
	info->scsi.phase = PHASE_SELECTION;
	info->scsi.SCp = SCpnt->SCp;
	info->SCpnt = SCpnt;
	info->dma.transfer_type = fasdma_none;

	fas216_log(info, LOG_ERROR, "sending bus device reset");

	msgqueue_flush(&info->scsi.msgs);
	msgqueue_addmsg(&info->scsi.msgs, 1, BUS_DEVICE_RESET);

	/* following what the ESP driver says */
	fas216_set_stc(info, 0);
	fas216_cmd(info, CMD_NOP | CMD_WITHDMA);

	/* flush FIFO */
	fas216_cmd(info, CMD_FLUSHFIFO);

	/* load bus-id and timeout */
	fas216_writeb(info, REG_SDID, BUSID(SCpnt->device->id));
	fas216_writeb(info, REG_STIM, info->ifcfg.select_timeout);

	/* synchronous transfers */
	fas216_set_sync(info, SCpnt->device->id);

	msg = msgqueue_getmsg(&info->scsi.msgs, 0);

	fas216_writeb(info, REG_FF, BUS_DEVICE_RESET);
	msg->fifo = 1;

	fas216_cmd(info, CMD_SELECTATNSTOP);
}

/**
 * fas216_kick - kick a command to the interface
 * @info: our host interface to kick
 *
 * Kick a command to the interface, interface should be idle.
 * Notes: Interrupts are always disabled!
 */
static void fas216_kick(FAS216_Info *info)
{
	struct scsi_cmnd *SCpnt = NULL;
#define TYPE_OTHER	0
#define TYPE_RESET	1
#define TYPE_QUEUE	2
	int where_from = TYPE_OTHER;

	fas216_checkmagic(info);

	/*
	 * Obtain the next command to process.
	 */
	do {
		if (info->rstSCpnt) {
			SCpnt = info->rstSCpnt;
			/* don't remove it */
			where_from = TYPE_RESET;
			break;
		}

		if (info->reqSCpnt) {
			SCpnt = info->reqSCpnt;
			info->reqSCpnt = NULL;
			break;
		}

		if (info->origSCpnt) {
			SCpnt = info->origSCpnt;
			info->origSCpnt = NULL;
			break;
		}

		/* retrieve next command */
		if (!SCpnt) {
			SCpnt = queue_remove_exclude(&info->queues.issue,
						     info->busyluns);
			where_from = TYPE_QUEUE;
			break;
		}
	} while (0);

	if (!SCpnt) {
		/*
		 * no command pending, so enable reselection.
		 */
		fas216_cmd(info, CMD_ENABLESEL);
		return;
	}

	/*
	 * We're going to start a command, so disable reselection
	 */
	fas216_cmd(info, CMD_DISABLESEL);

	if (info->scsi.disconnectable && info->SCpnt) {
		fas216_log(info, LOG_CONNECT,
			"moved command for %d to disconnected queue",
			info->SCpnt->device->id);
		queue_add_cmd_tail(&info->queues.disconnected, info->SCpnt);
		info->scsi.disconnectable = 0;
		info->SCpnt = NULL;
	}

	fas216_log_command(info, LOG_CONNECT | LOG_MESSAGES, SCpnt,
			   "starting");

	switch (where_from) {
	case TYPE_QUEUE:
		fas216_allocate_tag(info, SCpnt);
	case TYPE_OTHER:
		fas216_start_command(info, SCpnt);
		break;
	case TYPE_RESET:
		fas216_do_bus_device_reset(info, SCpnt);
		break;
	}

	fas216_log(info, LOG_CONNECT, "select: data pointers [%p, %X]",
		info->scsi.SCp.ptr, info->scsi.SCp.this_residual);

	/*
	 * should now get either DISCONNECT or
	 * (FUNCTION DONE with BUS SERVICE) interrupt
	 */
}

/*
 * Clean up from issuing a BUS DEVICE RESET message to a device.
 */
static void fas216_devicereset_done(FAS216_Info *info, struct scsi_cmnd *SCpnt,
				    unsigned int result)
{
	fas216_log(info, LOG_ERROR, "fas216 device reset complete");

	info->rstSCpnt = NULL;
	info->rst_dev_status = 1;
	wake_up(&info->eh_wait);
}

/**
 * fas216_rq_sns_done - Finish processing automatic request sense command
 * @info: interface that completed
 * @SCpnt: command that completed
 * @result: driver byte of result
 *
 * Finish processing automatic request sense command
 */
static void fas216_rq_sns_done(FAS216_Info *info, struct scsi_cmnd *SCpnt,
			       unsigned int result)
{
	fas216_log_target(info, LOG_CONNECT, SCpnt->device->id,
		   "request sense complete, result=0x%04x%02x%02x",
		   result, SCpnt->SCp.Message, SCpnt->SCp.Status);

	if (result != DID_OK || SCpnt->SCp.Status != GOOD)
		/*
		 * Something went wrong.  Make sure that we don't
		 * have valid data in the sense buffer that could
		 * confuse the higher levels.
		 */
		memset(SCpnt->sense_buffer, 0, sizeof(SCpnt->sense_buffer));
//printk("scsi%d.%c: sense buffer: ", info->host->host_no, '0' + SCpnt->device->id);
//{ int i; for (i = 0; i < 32; i++) printk("%02x ", SCpnt->sense_buffer[i]); printk("\n"); }
	/*
	 * Note that we don't set SCpnt->result, since that should
	 * reflect the status of the command that we were asked by
	 * the upper layers to process.  This would have been set
	 * correctly by fas216_std_done.
	 */
	scsi_eh_restore_cmnd(SCpnt, &info->ses);
	SCpnt->scsi_done(SCpnt);
}

/**
 * fas216_std_done - finish processing of standard command
 * @info: interface that completed
 * @SCpnt: command that completed
 * @result: driver byte of result
 *
 * Finish processing of standard command
 */
static void
fas216_std_done(FAS216_Info *info, struct scsi_cmnd *SCpnt, unsigned int result)
{
	info->stats.fins += 1;

	SCpnt->result = result << 16 | info->scsi.SCp.Message << 8 |
			info->scsi.SCp.Status;

	fas216_log_command(info, LOG_CONNECT, SCpnt,
		"command complete, result=0x%08x", SCpnt->result);

	/*
	 * If the driver detected an error, we're all done.
	 */
	if (host_byte(SCpnt->result) != DID_OK ||
	    msg_byte(SCpnt->result) != COMMAND_COMPLETE)
		goto done;

	/*
	 * If the command returned CHECK_CONDITION or COMMAND_TERMINATED
	 * status, request the sense information.
	 */
	if (status_byte(SCpnt->result) == CHECK_CONDITION ||
	    status_byte(SCpnt->result) == COMMAND_TERMINATED)
		goto request_sense;

	/*
	 * If the command did not complete with GOOD status,
	 * we are all done here.
	 */
	if (status_byte(SCpnt->result) != GOOD)
		goto done;

	/*
	 * We have successfully completed a command.  Make sure that
	 * we do not have any buffers left to transfer.  The world
	 * is not perfect, and we seem to occasionally hit this.
	 * It can be indicative of a buggy driver, target or the upper
	 * levels of the SCSI code.
	 */
	if (info->scsi.SCp.ptr) {
		switch (SCpnt->cmnd[0]) {
		case INQUIRY:
		case START_STOP:
		case MODE_SENSE:
			break;

		default:
			scmd_printk(KERN_ERR, SCpnt,
				    "incomplete data transfer detected: res=%08X ptr=%p len=%X\n",
				    SCpnt->result, info->scsi.SCp.ptr,
				    info->scsi.SCp.this_residual);
			scsi_print_command(SCpnt);
			set_host_byte(SCpnt, DID_ERROR);
			goto request_sense;
		}
	}

done:
	if (SCpnt->scsi_done) {
		SCpnt->scsi_done(SCpnt);
		return;
	}

	panic("scsi%d.H: null scsi_done function in fas216_done",
		info->host->host_no);


request_sense:
	if (SCpnt->cmnd[0] == REQUEST_SENSE)
		goto done;

	scsi_eh_prep_cmnd(SCpnt, &info->ses, NULL, 0, ~0);
	fas216_log_target(info, LOG_CONNECT, SCpnt->device->id,
			  "requesting sense");
	init_SCp(SCpnt);
	SCpnt->SCp.Message = 0;
	SCpnt->SCp.Status = 0;
	SCpnt->tag = 0;
	SCpnt->host_scribble = (void *)fas216_rq_sns_done;

	/*
	 * Place this command into the high priority "request
	 * sense" slot.  This will be the very next command
	 * executed, unless a target connects to us.
	 */
	if (info->reqSCpnt)
		printk(KERN_WARNING "scsi%d.%c: losing request command\n",
			info->host->host_no, '0' + SCpnt->device->id);
	info->reqSCpnt = SCpnt;
}

/**
 * fas216_done - complete processing for current command
 * @info: interface that completed
 * @result: driver byte of result
 *
 * Complete processing for current command
 */
static void fas216_done(FAS216_Info *info, unsigned int result)
{
	void (*fn)(FAS216_Info *, struct scsi_cmnd *, unsigned int);
	struct scsi_cmnd *SCpnt;
	unsigned long flags;

	fas216_checkmagic(info);

	if (!info->SCpnt)
		goto no_command;

	SCpnt = info->SCpnt;
	info->SCpnt = NULL;
    	info->scsi.phase = PHASE_IDLE;

	if (info->scsi.aborting) {
		fas216_log(info, 0, "uncaught abort - returning DID_ABORT");
		result = DID_ABORT;
		info->scsi.aborting = 0;
	}

	/*
	 * Sanity check the completion - if we have zero bytes left
	 * to transfer, we should not have a valid pointer.
	 */
	if (info->scsi.SCp.ptr && info->scsi.SCp.this_residual == 0) {
		scmd_printk(KERN_INFO, SCpnt,
			    "zero bytes left to transfer, but buffer pointer still valid: ptr=%p len=%08x\n",
			    info->scsi.SCp.ptr, info->scsi.SCp.this_residual);
		info->scsi.SCp.ptr = NULL;
		scsi_print_command(SCpnt);
	}

	/*
	 * Clear down this command as completed.  If we need to request
	 * the sense information, fas216_kick will re-assert the busy
	 * status.
	 */
	info->device[SCpnt->device->id].parity_check = 0;
	clear_bit(SCpnt->device->id * 8 +
		  (u8)(SCpnt->device->lun & 0x7), info->busyluns);

	fn = (void (*)(FAS216_Info *, struct scsi_cmnd *, unsigned int))SCpnt->host_scribble;
	fn(info, SCpnt, result);

	if (info->scsi.irq) {
		spin_lock_irqsave(&info->host_lock, flags);
		if (info->scsi.phase == PHASE_IDLE)
			fas216_kick(info);
		spin_unlock_irqrestore(&info->host_lock, flags);
	}
	return;

no_command:
	panic("scsi%d.H: null command in fas216_done",
		info->host->host_no);
}

/**
 * fas216_queue_command - queue a command for adapter to process.
 * @SCpnt: Command to queue
 * @done: done function to call once command is complete
 *
 * Queue a command for adapter to process.
 * Returns: 0 on success, else error.
 * Notes: io_request_lock is held, interrupts are disabled.
 */
static int fas216_queue_command_lck(struct scsi_cmnd *SCpnt,
			 void (*done)(struct scsi_cmnd *))
{
	FAS216_Info *info = (FAS216_Info *)SCpnt->device->host->hostdata;
	int result;

	fas216_checkmagic(info);

	fas216_log_command(info, LOG_CONNECT, SCpnt,
			   "received command (%p)", SCpnt);

	SCpnt->scsi_done = done;
	SCpnt->host_scribble = (void *)fas216_std_done;
	SCpnt->result = 0;

	init_SCp(SCpnt);

	info->stats.queues += 1;
	SCpnt->tag = 0;

	spin_lock(&info->host_lock);

	/*
	 * Add command into execute queue and let it complete under
	 * whatever scheme we're using.
	 */
	result = !queue_add_cmd_ordered(&info->queues.issue, SCpnt);

	/*
	 * If we successfully added the command,
	 * kick the interface to get it moving.
	 */
	if (result == 0 && info->scsi.phase == PHASE_IDLE)
		fas216_kick(info);
	spin_unlock(&info->host_lock);

	fas216_log_target(info, LOG_CONNECT, -1, "queue %s",
		result ? "failure" : "success");

	return result;
}

DEF_SCSI_QCMD(fas216_queue_command)

/**
 * fas216_internal_done - trigger restart of a waiting thread in fas216_noqueue_command
 * @SCpnt: Command to wake
 *
 * Trigger restart of a waiting thread in fas216_command
 */
static void fas216_internal_done(struct scsi_cmnd *SCpnt)
{
	FAS216_Info *info = (FAS216_Info *)SCpnt->device->host->hostdata;

	fas216_checkmagic(info);

	info->internal_done = 1;
}

/**
 * fas216_noqueue_command - process a command for the adapter.
 * @SCpnt: Command to queue
 *
 * Queue a command for adapter to process.
 * Returns: scsi result code.
 * Notes: io_request_lock is held, interrupts are disabled.
 */
static int fas216_noqueue_command_lck(struct scsi_cmnd *SCpnt,
			   void (*done)(struct scsi_cmnd *))
{
	FAS216_Info *info = (FAS216_Info *)SCpnt->device->host->hostdata;

	fas216_checkmagic(info);

	/*
	 * We should only be using this if we don't have an interrupt.
	 * Provide some "incentive" to use the queueing code.
	 */
	BUG_ON(info->scsi.irq);

	info->internal_done = 0;
	fas216_queue_command_lck(SCpnt, fas216_internal_done);

	/*
	 * This wastes time, since we can't return until the command is
	 * complete. We can't sleep either since we may get re-entered!
	 * However, we must re-enable interrupts, or else we'll be
	 * waiting forever.
	 */
	spin_unlock_irq(info->host->host_lock);

	while (!info->internal_done) {
		/*
		 * If we don't have an IRQ, then we must poll the card for
		 * it's interrupt, and use that to call this driver's
		 * interrupt routine.  That way, we keep the command
		 * progressing.  Maybe we can add some intelligence here
		 * and go to sleep if we know that the device is going
		 * to be some time (eg, disconnected).
		 */
		if (fas216_readb(info, REG_STAT) & STAT_INT) {
			spin_lock_irq(info->host->host_lock);
			fas216_intr(info);
			spin_unlock_irq(info->host->host_lock);
		}
	}

	spin_lock_irq(info->host->host_lock);

	done(SCpnt);

	return 0;
}

DEF_SCSI_QCMD(fas216_noqueue_command)

/*
 * Error handler timeout function.  Indicate that we timed out,
 * and wake up any error handler process so it can continue.
 */
static void fas216_eh_timer(unsigned long data)
{
	FAS216_Info *info = (FAS216_Info *)data;

	fas216_log(info, LOG_ERROR, "error handling timed out\n");

	del_timer(&info->eh_timer);

	if (info->rst_bus_status == 0)
		info->rst_bus_status = -1;
	if (info->rst_dev_status == 0)
		info->rst_dev_status = -1;

	wake_up(&info->eh_wait);
}

enum res_find {
	res_failed,		/* not found			*/
	res_success,		/* command on issue queue	*/
	res_hw_abort		/* command on disconnected dev	*/
};

/**
 * fas216_do_abort - decide how to abort a command
 * @SCpnt: command to abort
 *
 * Decide how to abort a command.
 * Returns: abort status
 */
static enum res_find fas216_find_command(FAS216_Info *info,
					 struct scsi_cmnd *SCpnt)
{
	enum res_find res = res_failed;

	if (queue_remove_cmd(&info->queues.issue, SCpnt)) {
		/*
		 * The command was on the issue queue, and has not been
		 * issued yet.  We can remove the command from the queue,
		 * and acknowledge the abort.  Neither the device nor the
		 * interface know about the command.
		 */
		printk("on issue queue ");

		res = res_success;
	} else if (queue_remove_cmd(&info->queues.disconnected, SCpnt)) {
		/*
		 * The command was on the disconnected queue.  We must
		 * reconnect with the device if possible, and send it
		 * an abort message.
		 */
		printk("on disconnected queue ");

		res = res_hw_abort;
	} else if (info->SCpnt == SCpnt) {
		printk("executing ");

		switch (info->scsi.phase) {
		/*
		 * If the interface is idle, and the command is 'disconnectable',
		 * then it is the same as on the disconnected queue.
		 */
		case PHASE_IDLE:
			if (info->scsi.disconnectable) {
				info->scsi.disconnectable = 0;
				info->SCpnt = NULL;
				res = res_hw_abort;
			}
			break;

		default:
			break;
		}
	} else if (info->origSCpnt == SCpnt) {
		/*
		 * The command will be executed next, but a command
		 * is currently using the interface.  This is similar to
		 * being on the issue queue, except the busylun bit has
		 * been set.
		 */
		info->origSCpnt = NULL;
		clear_bit(SCpnt->device->id * 8 +
			  (u8)(SCpnt->device->lun & 0x7), info->busyluns);
		printk("waiting for execution ");
		res = res_success;
	} else
		printk("unknown ");

	return res;
}

/**
 * fas216_eh_abort - abort this command
 * @SCpnt: command to abort
 *
 * Abort this command.
 * Returns: FAILED if unable to abort
 * Notes: io_request_lock is taken, and irqs are disabled
 */
int fas216_eh_abort(struct scsi_cmnd *SCpnt)
{
	FAS216_Info *info = (FAS216_Info *)SCpnt->device->host->hostdata;
	int result = FAILED;

	fas216_checkmagic(info);

	info->stats.aborts += 1;

	scmd_printk(KERN_WARNING, SCpnt, "abort command\n");

	print_debug_list();
	fas216_dumpstate(info);

	switch (fas216_find_command(info, SCpnt)) {
	/*
	 * We found the command, and cleared it out.  Either
	 * the command is still known to be executing on the
	 * target, or the busylun bit is not set.
	 */
	case res_success:
		scmd_printk(KERN_WARNING, SCpnt, "abort %p success\n", SCpnt);
		result = SUCCESS;
		break;

	/*
	 * We need to reconnect to the target and send it an
	 * ABORT or ABORT_TAG message.  We can only do this
	 * if the bus is free.
	 */
	case res_hw_abort:

	/*
	 * We are unable to abort the command for some reason.
	 */
	default:
	case res_failed:
		scmd_printk(KERN_WARNING, SCpnt, "abort %p failed\n", SCpnt);
		break;
	}

	return result;
}

/**
 * fas216_eh_device_reset - Reset the device associated with this command
 * @SCpnt: command specifing device to reset
 *
 * Reset the device associated with this command.
 * Returns: FAILED if unable to reset.
 * Notes: We won't be re-entered, so we'll only have one device
 * reset on the go at one time.
 */
int fas216_eh_device_reset(struct scsi_cmnd *SCpnt)
{
	FAS216_Info *info = (FAS216_Info *)SCpnt->device->host->hostdata;
	unsigned long flags;
	int i, res = FAILED, target = SCpnt->device->id;

	fas216_log(info, LOG_ERROR, "device reset for target %d", target);

	spin_lock_irqsave(&info->host_lock, flags);

	do {
		/*
		 * If we are currently connected to a device, and
		 * it is the device we want to reset, there is
		 * nothing we can do here.  Chances are it is stuck,
		 * and we need a bus reset.
		 */
		if (info->SCpnt && !info->scsi.disconnectable &&
		    info->SCpnt->device->id == SCpnt->device->id)
			break;

		/*
		 * We're going to be resetting this device.  Remove
		 * all pending commands from the driver.  By doing
		 * so, we guarantee that we won't touch the command
		 * structures except to process the reset request.
		 */
		queue_remove_all_target(&info->queues.issue, target);
		queue_remove_all_target(&info->queues.disconnected, target);
		if (info->origSCpnt && info->origSCpnt->device->id == target)
			info->origSCpnt = NULL;
		if (info->reqSCpnt && info->reqSCpnt->device->id == target)
			info->reqSCpnt = NULL;
		for (i = 0; i < 8; i++)
			clear_bit(target * 8 + i, info->busyluns);

		/*
		 * Hijack this SCSI command structure to send
		 * a bus device reset message to this device.
		 */
		SCpnt->host_scribble = (void *)fas216_devicereset_done;

		info->rst_dev_status = 0;
		info->rstSCpnt = SCpnt;

		if (info->scsi.phase == PHASE_IDLE)
			fas216_kick(info);

		mod_timer(&info->eh_timer, jiffies + 30 * HZ);
		spin_unlock_irqrestore(&info->host_lock, flags);

		/*
		 * Wait up to 30 seconds for the reset to complete.
		 */
		wait_event(info->eh_wait, info->rst_dev_status);

		del_timer_sync(&info->eh_timer);
		spin_lock_irqsave(&info->host_lock, flags);
		info->rstSCpnt = NULL;

		if (info->rst_dev_status == 1)
			res = SUCCESS;
	} while (0);

	SCpnt->host_scribble = NULL;
	spin_unlock_irqrestore(&info->host_lock, flags);

	fas216_log(info, LOG_ERROR, "device reset complete: %s\n",
		   res == SUCCESS ? "success" : "failed");

	return res;
}

/**
 * fas216_eh_bus_reset - Reset the bus associated with the command
 * @SCpnt: command specifing bus to reset
 *
 * Reset the bus associated with the command.
 * Returns: FAILED if unable to reset.
 * Notes: Further commands are blocked.
 */
int fas216_eh_bus_reset(struct scsi_cmnd *SCpnt)
{
	FAS216_Info *info = (FAS216_Info *)SCpnt->device->host->hostdata;
	unsigned long flags;
	struct scsi_device *SDpnt;

	fas216_checkmagic(info);
	fas216_log(info, LOG_ERROR, "resetting bus");

	info->stats.bus_resets += 1;

	spin_lock_irqsave(&info->host_lock, flags);

	/*
	 * Stop all activity on this interface.
	 */
	fas216_aborttransfer(info);
	fas216_writeb(info, REG_CNTL3, info->scsi.cfg[2]);

	/*
	 * Clear any pending interrupts.
	 */
	while (fas216_readb(info, REG_STAT) & STAT_INT)
		fas216_readb(info, REG_INST);

	info->rst_bus_status = 0;

	/*
	 * For each attached hard-reset device, clear out
	 * all command structures.  Leave the running
	 * command in place.
	 */
	shost_for_each_device(SDpnt, info->host) {
		int i;

		if (SDpnt->soft_reset)
			continue;

		queue_remove_all_target(&info->queues.issue, SDpnt->id);
		queue_remove_all_target(&info->queues.disconnected, SDpnt->id);
		if (info->origSCpnt && info->origSCpnt->device->id == SDpnt->id)
			info->origSCpnt = NULL;
		if (info->reqSCpnt && info->reqSCpnt->device->id == SDpnt->id)
			info->reqSCpnt = NULL;
		info->SCpnt = NULL;

		for (i = 0; i < 8; i++)
			clear_bit(SDpnt->id * 8 + i, info->busyluns);
	}

	info->scsi.phase = PHASE_IDLE;

	/*
	 * Reset the SCSI bus.  Device cleanup happens in
	 * the interrupt handler.
	 */
	fas216_cmd(info, CMD_RESETSCSI);

	mod_timer(&info->eh_timer, jiffies + HZ);
	spin_unlock_irqrestore(&info->host_lock, flags);

	/*
	 * Wait one second for the interrupt.
	 */
	wait_event(info->eh_wait, info->rst_bus_status);
	del_timer_sync(&info->eh_timer);

	fas216_log(info, LOG_ERROR, "bus reset complete: %s\n",
		   info->rst_bus_status == 1 ? "success" : "failed");

	return info->rst_bus_status == 1 ? SUCCESS : FAILED;
}

/**
 * fas216_init_chip - Initialise FAS216 state after reset
 * @info: state structure for interface
 *
 * Initialise FAS216 state after reset
 */
static void fas216_init_chip(FAS216_Info *info)
{
	unsigned int clock = ((info->ifcfg.clockrate - 1) / 5 + 1) & 7;
	fas216_writeb(info, REG_CLKF, clock);
	fas216_writeb(info, REG_CNTL1, info->scsi.cfg[0]);
	fas216_writeb(info, REG_CNTL2, info->scsi.cfg[1]);
	fas216_writeb(info, REG_CNTL3, info->scsi.cfg[2]);
	fas216_writeb(info, REG_STIM, info->ifcfg.select_timeout);
	fas216_writeb(info, REG_SOF, 0);
	fas216_writeb(info, REG_STP, info->scsi.async_stp);
	fas216_writeb(info, REG_CNTL1, info->scsi.cfg[0]);
}

/**
 * fas216_eh_host_reset - Reset the host associated with this command
 * @SCpnt: command specifing host to reset
 *
 * Reset the host associated with this command.
 * Returns: FAILED if unable to reset.
 * Notes: io_request_lock is taken, and irqs are disabled
 */
int fas216_eh_host_reset(struct scsi_cmnd *SCpnt)
{
	FAS216_Info *info = (FAS216_Info *)SCpnt->device->host->hostdata;

	spin_lock_irq(info->host->host_lock);

	fas216_checkmagic(info);

	fas216_log(info, LOG_ERROR, "resetting host");

	/*
	 * Reset the SCSI chip.
	 */
	fas216_cmd(info, CMD_RESETCHIP);

	/*
	 * Ugly ugly ugly!
	 * We need to release the host_lock and enable
	 * IRQs if we sleep, but we must relock and disable
	 * IRQs after the sleep.
	 */
	spin_unlock_irq(info->host->host_lock);
	msleep(50 * 1000/100);
	spin_lock_irq(info->host->host_lock);

	/*
	 * Release the SCSI reset.
	 */
	fas216_cmd(info, CMD_NOP);

	fas216_init_chip(info);

	spin_unlock_irq(info->host->host_lock);
	return SUCCESS;
}

#define TYPE_UNKNOWN	0
#define TYPE_NCR53C90	1
#define TYPE_NCR53C90A	2
#define TYPE_NCR53C9x	3
#define TYPE_Am53CF94	4
#define TYPE_EmFAS216	5
#define TYPE_QLFAS216	6

static char *chip_types[] = {
	"unknown",
	"NS NCR53C90",
	"NS NCR53C90A",
	"NS NCR53C9x",
	"AMD Am53CF94",
	"Emulex FAS216",
	"QLogic FAS216"
};

static int fas216_detect_type(FAS216_Info *info)
{
	int family, rev;

	/*
	 * Reset the chip.
	 */
	fas216_writeb(info, REG_CMD, CMD_RESETCHIP);
	udelay(50);
	fas216_writeb(info, REG_CMD, CMD_NOP);

	/*
	 * Check to see if control reg 2 is present.
	 */
	fas216_writeb(info, REG_CNTL3, 0);
	fas216_writeb(info, REG_CNTL2, CNTL2_S2FE);

	/*
	 * If we are unable to read back control reg 2
	 * correctly, it is not present, and we have a
	 * NCR53C90.
	 */
	if ((fas216_readb(info, REG_CNTL2) & (~0xe0)) != CNTL2_S2FE)
		return TYPE_NCR53C90;

	/*
	 * Now, check control register 3
	 */
	fas216_writeb(info, REG_CNTL2, 0);
	fas216_writeb(info, REG_CNTL3, 0);
	fas216_writeb(info, REG_CNTL3, 5);

	/*
	 * If we are unable to read the register back
	 * correctly, we have a NCR53C90A
	 */
	if (fas216_readb(info, REG_CNTL3) != 5)
		return TYPE_NCR53C90A;

	/*
	 * Now read the ID from the chip.
	 */
	fas216_writeb(info, REG_CNTL3, 0);

	fas216_writeb(info, REG_CNTL3, CNTL3_ADIDCHK);
	fas216_writeb(info, REG_CNTL3, 0);

	fas216_writeb(info, REG_CMD, CMD_RESETCHIP);
	udelay(50);
	fas216_writeb(info, REG_CMD, CMD_WITHDMA | CMD_NOP);

	fas216_writeb(info, REG_CNTL2, CNTL2_ENF);
	fas216_writeb(info, REG_CMD, CMD_RESETCHIP);
	udelay(50);
	fas216_writeb(info, REG_CMD, CMD_NOP);

	rev     = fas216_readb(info, REG_ID);
	family  = rev >> 3;
	rev    &= 7;

	switch (family) {
	case 0x01:
		if (rev == 4)
			return TYPE_Am53CF94;
		break;

	case 0x02:
		switch (rev) {
		case 2:
			return TYPE_EmFAS216;
		case 3:
			return TYPE_QLFAS216;
		}
		break;

	default:
		break;
	}
	printk("family %x rev %x\n", family, rev);
	return TYPE_NCR53C9x;
}

/**
 * fas216_reset_state - Initialise driver internal state
 * @info: state to initialise
 *
 * Initialise driver internal state
 */
static void fas216_reset_state(FAS216_Info *info)
{
	int i;

	fas216_checkmagic(info);

	fas216_bus_reset(info);

	/*
	 * Clear out all stale info in our state structure
	 */
	memset(info->busyluns, 0, sizeof(info->busyluns));
	info->scsi.disconnectable = 0;
	info->scsi.aborting = 0;

	for (i = 0; i < 8; i++) {
		info->device[i].parity_enabled	= 0;
		info->device[i].parity_check	= 1;
	}

	/*
	 * Drain all commands on disconnected queue
	 */
	while (queue_remove(&info->queues.disconnected) != NULL);

	/*
	 * Remove executing commands.
	 */
	info->SCpnt     = NULL;
	info->reqSCpnt  = NULL;
	info->rstSCpnt  = NULL;
	info->origSCpnt = NULL;
}

/**
 * fas216_init - initialise FAS/NCR/AMD SCSI structures.
 * @host: a driver-specific filled-out structure
 *
 * Initialise FAS/NCR/AMD SCSI structures.
 * Returns: 0 on success
 */
int fas216_init(struct Scsi_Host *host)
{
	FAS216_Info *info = (FAS216_Info *)host->hostdata;

	info->magic_start    = MAGIC;
	info->magic_end      = MAGIC;
	info->host           = host;
	info->scsi.cfg[0]    = host->this_id | CNTL1_PERE;
	info->scsi.cfg[1]    = CNTL2_ENF | CNTL2_S2FE;
	info->scsi.cfg[2]    = info->ifcfg.cntl3 |
			       CNTL3_ADIDCHK | CNTL3_QTAG | CNTL3_G2CB | CNTL3_LBTM;
	info->scsi.async_stp = fas216_syncperiod(info, info->ifcfg.asyncperiod);

	info->rst_dev_status = -1;
	info->rst_bus_status = -1;
	init_waitqueue_head(&info->eh_wait);
	init_timer(&info->eh_timer);
	info->eh_timer.data  = (unsigned long)info;
	info->eh_timer.function = fas216_eh_timer;
	
	spin_lock_init(&info->host_lock);

	memset(&info->stats, 0, sizeof(info->stats));

	msgqueue_initialise(&info->scsi.msgs);

	if (!queue_initialise(&info->queues.issue))
		return -ENOMEM;

	if (!queue_initialise(&info->queues.disconnected)) {
		queue_free(&info->queues.issue);
		return -ENOMEM;
	}

	return 0;
}

/**
 * fas216_add - initialise FAS/NCR/AMD SCSI ic.
 * @host: a driver-specific filled-out structure
 * @dev: parent device
 *
 * Initialise FAS/NCR/AMD SCSI ic.
 * Returns: 0 on success
 */
int fas216_add(struct Scsi_Host *host, struct device *dev)
{
	FAS216_Info *info = (FAS216_Info *)host->hostdata;
	int type, ret;

	if (info->ifcfg.clockrate <= 10 || info->ifcfg.clockrate > 40) {
		printk(KERN_CRIT "fas216: invalid clock rate %u MHz\n",
			info->ifcfg.clockrate);
		return -EINVAL;
	}

	fas216_reset_state(info);
	type = fas216_detect_type(info);
	info->scsi.type = chip_types[type];

	udelay(300);

	/*
	 * Initialise the chip correctly.
	 */
	fas216_init_chip(info);

	/*
	 * Reset the SCSI bus.  We don't want to see
	 * the resulting reset interrupt, so mask it
	 * out.
	 */
	fas216_writeb(info, REG_CNTL1, info->scsi.cfg[0] | CNTL1_DISR);
	fas216_writeb(info, REG_CMD, CMD_RESETSCSI);

	/*
	 * scsi standard says wait 250ms
	 */
	spin_unlock_irq(info->host->host_lock);
	msleep(100*1000/100);
	spin_lock_irq(info->host->host_lock);

	fas216_writeb(info, REG_CNTL1, info->scsi.cfg[0]);
	fas216_readb(info, REG_INST);

	fas216_checkmagic(info);

	ret = scsi_add_host(host, dev);
	if (ret)
		fas216_writeb(info, REG_CMD, CMD_RESETCHIP);
	else
		scsi_scan_host(host);

	return ret;
}

void fas216_remove(struct Scsi_Host *host)
{
	FAS216_Info *info = (FAS216_Info *)host->hostdata;

	fas216_checkmagic(info);
	scsi_remove_host(host);

	fas216_writeb(info, REG_CMD, CMD_RESETCHIP);
	scsi_host_put(host);
}

/**
 * fas216_release - release all resources for FAS/NCR/AMD SCSI ic.
 * @host: a driver-specific filled-out structure
 *
 * release all resources and put everything to bed for FAS/NCR/AMD SCSI ic.
 */
void fas216_release(struct Scsi_Host *host)
{
	FAS216_Info *info = (FAS216_Info *)host->hostdata;

	queue_free(&info->queues.disconnected);
	queue_free(&info->queues.issue);
}

void fas216_print_host(FAS216_Info *info, struct seq_file *m)
{
	seq_printf(m,
			"\n"
			"Chip    : %s\n"
			" Address: 0x%p\n"
			" IRQ    : %d\n"
			" DMA    : %d\n",
			info->scsi.type, info->scsi.io_base,
			info->scsi.irq, info->scsi.dma);
}

void fas216_print_stats(FAS216_Info *info, struct seq_file *m)
{
	seq_printf(m, "\n"
			"Command Statistics:\n"
			" Queued     : %u\n"
			" Issued     : %u\n"
			" Completed  : %u\n"
			" Reads      : %u\n"
			" Writes     : %u\n"
			" Others     : %u\n"
			" Disconnects: %u\n"
			" Aborts     : %u\n"
			" Bus resets : %u\n"
			" Host resets: %u\n",
			info->stats.queues,	 info->stats.removes,
			info->stats.fins,	 info->stats.reads,
			info->stats.writes,	 info->stats.miscs,
			info->stats.disconnects, info->stats.aborts,
			info->stats.bus_resets,	 info->stats.host_resets);
}

void fas216_print_devices(FAS216_Info *info, struct seq_file *m)
{
	struct fas216_device *dev;
	struct scsi_device *scd;

	seq_printf(m, "Device/Lun TaggedQ       Parity   Sync\n");

	shost_for_each_device(scd, info->host) {
		dev = &info->device[scd->id];
		seq_printf(m, "     %d/%llu   ", scd->id, scd->lun);
		if (scd->tagged_supported)
			seq_printf(m, "%3sabled(%3d) ",
				     scd->simple_tags ? "en" : "dis",
				     scd->current_tag);
		else
			seq_printf(m, "unsupported   ");

		seq_printf(m, "%3sabled ", dev->parity_enabled ? "en" : "dis");

		if (dev->sof)
			seq_printf(m, "offset %d, %d ns\n",
				     dev->sof, dev->period * 4);
		else
			seq_printf(m, "async\n");
	}
}

EXPORT_SYMBOL(fas216_init);
EXPORT_SYMBOL(fas216_add);
EXPORT_SYMBOL(fas216_queue_command);
EXPORT_SYMBOL(fas216_noqueue_command);
EXPORT_SYMBOL(fas216_intr);
EXPORT_SYMBOL(fas216_remove);
EXPORT_SYMBOL(fas216_release);
EXPORT_SYMBOL(fas216_eh_abort);
EXPORT_SYMBOL(fas216_eh_device_reset);
EXPORT_SYMBOL(fas216_eh_bus_reset);
EXPORT_SYMBOL(fas216_eh_host_reset);
EXPORT_SYMBOL(fas216_print_host);
EXPORT_SYMBOL(fas216_print_stats);
EXPORT_SYMBOL(fas216_print_devices);

MODULE_AUTHOR("Russell King");
MODULE_DESCRIPTION("Generic FAS216/NCR53C9x driver core");
MODULE_LICENSE("GPL");