1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
|
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Copyright (C) 2017 John Crispin <john@phrozen.org>
*
* Based on code from
* Allwinner Technology Co., Ltd. <www.allwinnertech.com>
*/
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/mfd/syscon.h>
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/of_platform.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/reset.h>
#define RT_SYSC_REG_SYSCFG1 0x014
#define RT_SYSC_REG_CLKCFG1 0x030
#define RT_SYSC_REG_USB_PHY_CFG 0x05c
#define OFS_U2_PHY_AC0 0x800
#define OFS_U2_PHY_AC1 0x804
#define OFS_U2_PHY_AC2 0x808
#define OFS_U2_PHY_ACR0 0x810
#define OFS_U2_PHY_ACR1 0x814
#define OFS_U2_PHY_ACR2 0x818
#define OFS_U2_PHY_ACR3 0x81C
#define OFS_U2_PHY_ACR4 0x820
#define OFS_U2_PHY_AMON0 0x824
#define OFS_U2_PHY_DCR0 0x860
#define OFS_U2_PHY_DCR1 0x864
#define OFS_U2_PHY_DTM0 0x868
#define OFS_U2_PHY_DTM1 0x86C
#define RT_RSTCTRL_UDEV BIT(25)
#define RT_RSTCTRL_UHST BIT(22)
#define RT_SYSCFG1_USB0_HOST_MODE BIT(10)
#define MT7620_CLKCFG1_UPHY0_CLK_EN BIT(25)
#define MT7620_CLKCFG1_UPHY1_CLK_EN BIT(22)
#define RT_CLKCFG1_UPHY1_CLK_EN BIT(20)
#define RT_CLKCFG1_UPHY0_CLK_EN BIT(18)
#define USB_PHY_UTMI_8B60M BIT(1)
#define UDEV_WAKEUP BIT(0)
struct ralink_usb_phy {
struct reset_control *rstdev;
struct reset_control *rsthost;
u32 clk;
struct phy *phy;
void __iomem *base;
struct regmap *sysctl;
};
static void u2_phy_w32(struct ralink_usb_phy *phy, u32 val, u32 reg)
{
writel(val, phy->base + reg);
}
static u32 u2_phy_r32(struct ralink_usb_phy *phy, u32 reg)
{
return readl(phy->base + reg);
}
static void ralink_usb_phy_init(struct ralink_usb_phy *phy)
{
u2_phy_r32(phy, OFS_U2_PHY_AC2);
u2_phy_r32(phy, OFS_U2_PHY_ACR0);
u2_phy_r32(phy, OFS_U2_PHY_DCR0);
u2_phy_w32(phy, 0x00ffff02, OFS_U2_PHY_DCR0);
u2_phy_r32(phy, OFS_U2_PHY_DCR0);
u2_phy_w32(phy, 0x00555502, OFS_U2_PHY_DCR0);
u2_phy_r32(phy, OFS_U2_PHY_DCR0);
u2_phy_w32(phy, 0x00aaaa02, OFS_U2_PHY_DCR0);
u2_phy_r32(phy, OFS_U2_PHY_DCR0);
u2_phy_w32(phy, 0x00000402, OFS_U2_PHY_DCR0);
u2_phy_r32(phy, OFS_U2_PHY_DCR0);
u2_phy_w32(phy, 0x0048086a, OFS_U2_PHY_AC0);
u2_phy_w32(phy, 0x4400001c, OFS_U2_PHY_AC1);
u2_phy_w32(phy, 0xc0200000, OFS_U2_PHY_ACR3);
u2_phy_w32(phy, 0x02000000, OFS_U2_PHY_DTM0);
}
static int ralink_usb_phy_power_on(struct phy *_phy)
{
struct ralink_usb_phy *phy = phy_get_drvdata(_phy);
u32 t;
/* enable the phy */
regmap_update_bits(phy->sysctl, RT_SYSC_REG_CLKCFG1,
phy->clk, phy->clk);
/* setup host mode */
regmap_update_bits(phy->sysctl, RT_SYSC_REG_SYSCFG1,
RT_SYSCFG1_USB0_HOST_MODE,
RT_SYSCFG1_USB0_HOST_MODE);
/* deassert the reset lines */
reset_control_deassert(phy->rsthost);
reset_control_deassert(phy->rstdev);
/*
* The SDK kernel had a delay of 100ms. however on device
* testing showed that 10ms is enough
*/
mdelay(10);
if (phy->base)
ralink_usb_phy_init(phy);
/* print some status info */
regmap_read(phy->sysctl, RT_SYSC_REG_USB_PHY_CFG, &t);
dev_info(&phy->phy->dev, "remote usb device wakeup %s\n",
(t & UDEV_WAKEUP) ? ("enabled") : ("disabled"));
if (t & USB_PHY_UTMI_8B60M)
dev_info(&phy->phy->dev, "UTMI 8bit 60MHz\n");
else
dev_info(&phy->phy->dev, "UTMI 16bit 30MHz\n");
return 0;
}
static int ralink_usb_phy_power_off(struct phy *_phy)
{
struct ralink_usb_phy *phy = phy_get_drvdata(_phy);
/* disable the phy */
regmap_update_bits(phy->sysctl, RT_SYSC_REG_CLKCFG1,
phy->clk, 0);
/* assert the reset lines */
reset_control_assert(phy->rstdev);
reset_control_assert(phy->rsthost);
return 0;
}
static struct phy_ops ralink_usb_phy_ops = {
.power_on = ralink_usb_phy_power_on,
.power_off = ralink_usb_phy_power_off,
.owner = THIS_MODULE,
};
static const struct of_device_id ralink_usb_phy_of_match[] = {
{
.compatible = "ralink,rt3352-usbphy",
.data = (void *)(uintptr_t)(RT_CLKCFG1_UPHY1_CLK_EN |
RT_CLKCFG1_UPHY0_CLK_EN)
},
{
.compatible = "mediatek,mt7620-usbphy",
.data = (void *)(uintptr_t)(MT7620_CLKCFG1_UPHY1_CLK_EN |
MT7620_CLKCFG1_UPHY0_CLK_EN)
},
{
.compatible = "mediatek,mt7628-usbphy",
.data = (void *)(uintptr_t)(MT7620_CLKCFG1_UPHY1_CLK_EN |
MT7620_CLKCFG1_UPHY0_CLK_EN) },
{ },
};
MODULE_DEVICE_TABLE(of, ralink_usb_phy_of_match);
static int ralink_usb_phy_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct resource *res;
struct phy_provider *phy_provider;
const struct of_device_id *match;
struct ralink_usb_phy *phy;
match = of_match_device(ralink_usb_phy_of_match, &pdev->dev);
if (!match)
return -ENODEV;
phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
if (!phy)
return -ENOMEM;
phy->clk = (uintptr_t)match->data;
phy->base = NULL;
phy->sysctl = syscon_regmap_lookup_by_phandle(dev->of_node, "ralink,sysctl");
if (IS_ERR(phy->sysctl)) {
dev_err(dev, "failed to get sysctl registers\n");
return PTR_ERR(phy->sysctl);
}
/* The MT7628 and MT7688 require extra setup of PHY registers. */
if (of_device_is_compatible(dev->of_node, "mediatek,mt7628-usbphy")) {
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
phy->base = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(phy->base)) {
dev_err(dev, "failed to remap register memory\n");
return PTR_ERR(phy->base);
}
}
phy->rsthost = devm_reset_control_get(&pdev->dev, "host");
if (IS_ERR(phy->rsthost)) {
dev_err(dev, "host reset is missing\n");
return PTR_ERR(phy->rsthost);
}
phy->rstdev = devm_reset_control_get(&pdev->dev, "device");
if (IS_ERR(phy->rstdev)) {
dev_err(dev, "device reset is missing\n");
return PTR_ERR(phy->rstdev);
}
phy->phy = devm_phy_create(dev, NULL, &ralink_usb_phy_ops);
if (IS_ERR(phy->phy)) {
dev_err(dev, "failed to create PHY\n");
return PTR_ERR(phy->phy);
}
phy_set_drvdata(phy->phy, phy);
phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
return PTR_ERR_OR_ZERO(phy_provider);
}
static struct platform_driver ralink_usb_phy_driver = {
.probe = ralink_usb_phy_probe,
.driver = {
.of_match_table = ralink_usb_phy_of_match,
.name = "ralink-usb-phy",
}
};
module_platform_driver(ralink_usb_phy_driver);
MODULE_DESCRIPTION("Ralink USB phy driver");
MODULE_AUTHOR("John Crispin <john@phrozen.org>");
MODULE_LICENSE("GPL v2");
|
