1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
|
/*
* ST SPEAr1310-miphy driver
*
* Copyright (C) 2014 ST Microelectronics
* Pratyush Anand <pratyush.anand@st.com>
* Mohit Kumar <mohit.kumar@st.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/bitops.h>
#include <linux/delay.h>
#include <linux/dma-mapping.h>
#include <linux/kernel.h>
#include <linux/mfd/syscon.h>
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/phy/phy.h>
#include <linux/regmap.h>
/* SPEAr1310 Registers */
#define SPEAR1310_PCIE_SATA_CFG 0x3A4
#define SPEAR1310_PCIE_SATA2_SEL_PCIE (0 << 31)
#define SPEAR1310_PCIE_SATA1_SEL_PCIE (0 << 30)
#define SPEAR1310_PCIE_SATA0_SEL_PCIE (0 << 29)
#define SPEAR1310_PCIE_SATA2_SEL_SATA BIT(31)
#define SPEAR1310_PCIE_SATA1_SEL_SATA BIT(30)
#define SPEAR1310_PCIE_SATA0_SEL_SATA BIT(29)
#define SPEAR1310_SATA2_CFG_TX_CLK_EN BIT(27)
#define SPEAR1310_SATA2_CFG_RX_CLK_EN BIT(26)
#define SPEAR1310_SATA2_CFG_POWERUP_RESET BIT(25)
#define SPEAR1310_SATA2_CFG_PM_CLK_EN BIT(24)
#define SPEAR1310_SATA1_CFG_TX_CLK_EN BIT(23)
#define SPEAR1310_SATA1_CFG_RX_CLK_EN BIT(22)
#define SPEAR1310_SATA1_CFG_POWERUP_RESET BIT(21)
#define SPEAR1310_SATA1_CFG_PM_CLK_EN BIT(20)
#define SPEAR1310_SATA0_CFG_TX_CLK_EN BIT(19)
#define SPEAR1310_SATA0_CFG_RX_CLK_EN BIT(18)
#define SPEAR1310_SATA0_CFG_POWERUP_RESET BIT(17)
#define SPEAR1310_SATA0_CFG_PM_CLK_EN BIT(16)
#define SPEAR1310_PCIE2_CFG_DEVICE_PRESENT BIT(11)
#define SPEAR1310_PCIE2_CFG_POWERUP_RESET BIT(10)
#define SPEAR1310_PCIE2_CFG_CORE_CLK_EN BIT(9)
#define SPEAR1310_PCIE2_CFG_AUX_CLK_EN BIT(8)
#define SPEAR1310_PCIE1_CFG_DEVICE_PRESENT BIT(7)
#define SPEAR1310_PCIE1_CFG_POWERUP_RESET BIT(6)
#define SPEAR1310_PCIE1_CFG_CORE_CLK_EN BIT(5)
#define SPEAR1310_PCIE1_CFG_AUX_CLK_EN BIT(4)
#define SPEAR1310_PCIE0_CFG_DEVICE_PRESENT BIT(3)
#define SPEAR1310_PCIE0_CFG_POWERUP_RESET BIT(2)
#define SPEAR1310_PCIE0_CFG_CORE_CLK_EN BIT(1)
#define SPEAR1310_PCIE0_CFG_AUX_CLK_EN BIT(0)
#define SPEAR1310_PCIE_CFG_MASK(x) ((0xF << (x * 4)) | BIT((x + 29)))
#define SPEAR1310_SATA_CFG_MASK(x) ((0xF << (x * 4 + 16)) | \
BIT((x + 29)))
#define SPEAR1310_PCIE_CFG_VAL(x) \
(SPEAR1310_PCIE_SATA##x##_SEL_PCIE | \
SPEAR1310_PCIE##x##_CFG_AUX_CLK_EN | \
SPEAR1310_PCIE##x##_CFG_CORE_CLK_EN | \
SPEAR1310_PCIE##x##_CFG_POWERUP_RESET | \
SPEAR1310_PCIE##x##_CFG_DEVICE_PRESENT)
#define SPEAR1310_SATA_CFG_VAL(x) \
(SPEAR1310_PCIE_SATA##x##_SEL_SATA | \
SPEAR1310_SATA##x##_CFG_PM_CLK_EN | \
SPEAR1310_SATA##x##_CFG_POWERUP_RESET | \
SPEAR1310_SATA##x##_CFG_RX_CLK_EN | \
SPEAR1310_SATA##x##_CFG_TX_CLK_EN)
#define SPEAR1310_PCIE_MIPHY_CFG_1 0x3A8
#define SPEAR1310_MIPHY_DUAL_OSC_BYPASS_EXT BIT(31)
#define SPEAR1310_MIPHY_DUAL_CLK_REF_DIV2 BIT(28)
#define SPEAR1310_MIPHY_DUAL_PLL_RATIO_TOP(x) (x << 16)
#define SPEAR1310_MIPHY_SINGLE_OSC_BYPASS_EXT BIT(15)
#define SPEAR1310_MIPHY_SINGLE_CLK_REF_DIV2 BIT(12)
#define SPEAR1310_MIPHY_SINGLE_PLL_RATIO_TOP(x) (x << 0)
#define SPEAR1310_PCIE_SATA_MIPHY_CFG_SATA_MASK (0xFFFF)
#define SPEAR1310_PCIE_SATA_MIPHY_CFG_PCIE_MASK (0xFFFF << 16)
#define SPEAR1310_PCIE_SATA_MIPHY_CFG_SATA \
(SPEAR1310_MIPHY_DUAL_OSC_BYPASS_EXT | \
SPEAR1310_MIPHY_DUAL_CLK_REF_DIV2 | \
SPEAR1310_MIPHY_DUAL_PLL_RATIO_TOP(60) | \
SPEAR1310_MIPHY_SINGLE_OSC_BYPASS_EXT | \
SPEAR1310_MIPHY_SINGLE_CLK_REF_DIV2 | \
SPEAR1310_MIPHY_SINGLE_PLL_RATIO_TOP(60))
#define SPEAR1310_PCIE_SATA_MIPHY_CFG_SATA_25M_CRYSTAL_CLK \
(SPEAR1310_MIPHY_SINGLE_PLL_RATIO_TOP(120))
#define SPEAR1310_PCIE_SATA_MIPHY_CFG_PCIE \
(SPEAR1310_MIPHY_DUAL_OSC_BYPASS_EXT | \
SPEAR1310_MIPHY_DUAL_PLL_RATIO_TOP(25) | \
SPEAR1310_MIPHY_SINGLE_OSC_BYPASS_EXT | \
SPEAR1310_MIPHY_SINGLE_PLL_RATIO_TOP(25))
#define SPEAR1310_PCIE_MIPHY_CFG_2 0x3AC
enum spear1310_miphy_mode {
SATA,
PCIE,
};
struct spear1310_miphy_priv {
/* instance id of this phy */
u32 id;
/* phy mode: 0 for SATA 1 for PCIe */
enum spear1310_miphy_mode mode;
/* regmap for any soc specific misc registers */
struct regmap *misc;
/* phy struct pointer */
struct phy *phy;
};
static int spear1310_miphy_pcie_init(struct spear1310_miphy_priv *priv)
{
u32 val;
regmap_update_bits(priv->misc, SPEAR1310_PCIE_MIPHY_CFG_1,
SPEAR1310_PCIE_SATA_MIPHY_CFG_PCIE_MASK,
SPEAR1310_PCIE_SATA_MIPHY_CFG_PCIE);
switch (priv->id) {
case 0:
val = SPEAR1310_PCIE_CFG_VAL(0);
break;
case 1:
val = SPEAR1310_PCIE_CFG_VAL(1);
break;
case 2:
val = SPEAR1310_PCIE_CFG_VAL(2);
break;
default:
return -EINVAL;
}
regmap_update_bits(priv->misc, SPEAR1310_PCIE_SATA_CFG,
SPEAR1310_PCIE_CFG_MASK(priv->id), val);
return 0;
}
static int spear1310_miphy_pcie_exit(struct spear1310_miphy_priv *priv)
{
regmap_update_bits(priv->misc, SPEAR1310_PCIE_SATA_CFG,
SPEAR1310_PCIE_CFG_MASK(priv->id), 0);
regmap_update_bits(priv->misc, SPEAR1310_PCIE_MIPHY_CFG_1,
SPEAR1310_PCIE_SATA_MIPHY_CFG_PCIE_MASK, 0);
return 0;
}
static int spear1310_miphy_init(struct phy *phy)
{
struct spear1310_miphy_priv *priv = phy_get_drvdata(phy);
int ret = 0;
if (priv->mode == PCIE)
ret = spear1310_miphy_pcie_init(priv);
return ret;
}
static int spear1310_miphy_exit(struct phy *phy)
{
struct spear1310_miphy_priv *priv = phy_get_drvdata(phy);
int ret = 0;
if (priv->mode == PCIE)
ret = spear1310_miphy_pcie_exit(priv);
return ret;
}
static const struct of_device_id spear1310_miphy_of_match[] = {
{ .compatible = "st,spear1310-miphy" },
{ },
};
MODULE_DEVICE_TABLE(of, spear1310_miphy_of_match);
static struct phy_ops spear1310_miphy_ops = {
.init = spear1310_miphy_init,
.exit = spear1310_miphy_exit,
.owner = THIS_MODULE,
};
static struct phy *spear1310_miphy_xlate(struct device *dev,
struct of_phandle_args *args)
{
struct spear1310_miphy_priv *priv = dev_get_drvdata(dev);
if (args->args_count < 1) {
dev_err(dev, "DT did not pass correct no of args\n");
return ERR_PTR(-ENODEV);
}
priv->mode = args->args[0];
if (priv->mode != SATA && priv->mode != PCIE) {
dev_err(dev, "DT did not pass correct phy mode\n");
return ERR_PTR(-ENODEV);
}
return priv->phy;
}
static int spear1310_miphy_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct spear1310_miphy_priv *priv;
struct phy_provider *phy_provider;
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
priv->misc =
syscon_regmap_lookup_by_phandle(dev->of_node, "misc");
if (IS_ERR(priv->misc)) {
dev_err(dev, "failed to find misc regmap\n");
return PTR_ERR(priv->misc);
}
if (of_property_read_u32(dev->of_node, "phy-id", &priv->id)) {
dev_err(dev, "failed to find phy id\n");
return -EINVAL;
}
priv->phy = devm_phy_create(dev, NULL, &spear1310_miphy_ops);
if (IS_ERR(priv->phy)) {
dev_err(dev, "failed to create SATA PCIe PHY\n");
return PTR_ERR(priv->phy);
}
dev_set_drvdata(dev, priv);
phy_set_drvdata(priv->phy, priv);
phy_provider =
devm_of_phy_provider_register(dev, spear1310_miphy_xlate);
if (IS_ERR(phy_provider)) {
dev_err(dev, "failed to register phy provider\n");
return PTR_ERR(phy_provider);
}
return 0;
}
static struct platform_driver spear1310_miphy_driver = {
.probe = spear1310_miphy_probe,
.driver = {
.name = "spear1310-miphy",
.of_match_table = of_match_ptr(spear1310_miphy_of_match),
},
};
module_platform_driver(spear1310_miphy_driver);
MODULE_DESCRIPTION("ST SPEAR1310-MIPHY driver");
MODULE_AUTHOR("Pratyush Anand <pratyush.anand@st.com>");
MODULE_LICENSE("GPL v2");
|
