summaryrefslogtreecommitdiffstats
path: root/drivers/phy/broadcom/phy-bcm63xx-usbh.c
blob: 6c05ba8b08bec3a1160aa12568673ed2b554d2a1 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
// SPDX-License-Identifier: GPL-2.0-or-later
/*
 * BCM6328 USBH PHY Controller Driver
 *
 * Copyright (C) 2020 Álvaro Fernández Rojas <noltari@gmail.com>
 * Copyright (C) 2015 Simon Arlott
 *
 * Derived from bcm963xx_4.12L.06B_consumer/kernel/linux/arch/mips/bcm963xx/setup.c:
 * Copyright (C) 2002 Broadcom Corporation
 *
 * Derived from OpenWrt patches:
 * Copyright (C) 2013 Jonas Gorski <jonas.gorski@gmail.com>
 * Copyright (C) 2013 Florian Fainelli <f.fainelli@gmail.com>
 * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
 */

#include <linux/clk.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/reset.h>

/* USBH control register offsets */
enum usbh_regs {
	USBH_BRT_CONTROL1 = 0,
	USBH_BRT_CONTROL2,
	USBH_BRT_STATUS1,
	USBH_BRT_STATUS2,
	USBH_UTMI_CONTROL1,
#define   USBH_UC1_DEV_MODE_SEL		BIT(0)
	USBH_TEST_PORT_CONTROL,
	USBH_PLL_CONTROL1,
#define   USBH_PLLC_REFCLKSEL_SHIFT	0
#define   USBH_PLLC_REFCLKSEL_MASK	(0x3 << USBH_PLLC_REFCLKSEL_SHIFT)
#define   USBH_PLLC_CLKSEL_SHIFT	2
#define   USBH_PLLC_CLKSEL_MASK		(0x3 << USBH_PLLC_CLKSEL_MASK)
#define   USBH_PLLC_XTAL_PWRDWNB	BIT(4)
#define   USBH_PLLC_PLL_PWRDWNB		BIT(5)
#define   USBH_PLLC_PLL_CALEN		BIT(6)
#define   USBH_PLLC_PHYPLL_BYP		BIT(7)
#define   USBH_PLLC_PLL_RESET		BIT(8)
#define   USBH_PLLC_PLL_IDDQ_PWRDN	BIT(9)
#define   USBH_PLLC_PLL_PWRDN_DELAY	BIT(10)
#define   USBH_6318_PLLC_PLL_SUSPEND_EN	BIT(27)
#define   USBH_6318_PLLC_PHYPLL_BYP	BIT(29)
#define   USBH_6318_PLLC_PLL_RESET	BIT(30)
#define   USBH_6318_PLLC_PLL_IDDQ_PWRDN	BIT(31)
	USBH_SWAP_CONTROL,
#define   USBH_SC_OHCI_DATA_SWAP	BIT(0)
#define   USBH_SC_OHCI_ENDIAN_SWAP	BIT(1)
#define   USBH_SC_OHCI_LOGICAL_ADDR_EN	BIT(2)
#define   USBH_SC_EHCI_DATA_SWAP	BIT(3)
#define   USBH_SC_EHCI_ENDIAN_SWAP	BIT(4)
#define   USBH_SC_EHCI_LOGICAL_ADDR_EN	BIT(5)
#define   USBH_SC_USB_DEVICE_SEL	BIT(6)
	USBH_GENERIC_CONTROL,
#define   USBH_GC_PLL_SUSPEND_EN	BIT(1)
	USBH_FRAME_ADJUST_VALUE,
	USBH_SETUP,
#define   USBH_S_IOC			BIT(4)
#define   USBH_S_IPP			BIT(5)
	USBH_MDIO,
	USBH_MDIO32,
	USBH_USB_SIM_CONTROL,
#define   USBH_USC_LADDR_SEL		BIT(5)

	__USBH_ENUM_SIZE
};

struct bcm63xx_usbh_phy_variant {
	/* Registers */
	long regs[__USBH_ENUM_SIZE];

	/* PLLC bits to set/clear for power on */
	u32 power_pllc_clr;
	u32 power_pllc_set;

	/* Setup bits to set/clear for power on */
	u32 setup_clr;
	u32 setup_set;

	/* Swap Control bits to set */
	u32 swapctl_dev_set;

	/* Test Port Control value to set if non-zero */
	u32 tpc_val;

	/* USB Sim Control bits to set */
	u32 usc_set;

	/* UTMI Control 1 bits to set */
	u32 utmictl1_dev_set;
};

struct bcm63xx_usbh_phy {
	void __iomem *base;
	struct clk *usbh_clk;
	struct clk *usb_ref_clk;
	struct reset_control *reset;
	const struct bcm63xx_usbh_phy_variant *variant;
	bool device_mode;
};

static const struct bcm63xx_usbh_phy_variant usbh_bcm6318 = {
	.regs = {
		[USBH_BRT_CONTROL1] = -1,
		[USBH_BRT_CONTROL2] = -1,
		[USBH_BRT_STATUS1] = -1,
		[USBH_BRT_STATUS2] = -1,
		[USBH_UTMI_CONTROL1] = 0x2c,
		[USBH_TEST_PORT_CONTROL] = 0x1c,
		[USBH_PLL_CONTROL1] = 0x04,
		[USBH_SWAP_CONTROL] = 0x0c,
		[USBH_GENERIC_CONTROL] = -1,
		[USBH_FRAME_ADJUST_VALUE] = 0x08,
		[USBH_SETUP] = 0x00,
		[USBH_MDIO] = 0x14,
		[USBH_MDIO32] = 0x18,
		[USBH_USB_SIM_CONTROL] = 0x20,
	},
	.power_pllc_clr = USBH_6318_PLLC_PLL_IDDQ_PWRDN,
	.power_pllc_set = USBH_6318_PLLC_PLL_SUSPEND_EN,
	.setup_set = USBH_S_IOC,
	.swapctl_dev_set = USBH_SC_USB_DEVICE_SEL,
	.usc_set = USBH_USC_LADDR_SEL,
	.utmictl1_dev_set = USBH_UC1_DEV_MODE_SEL,
};

static const struct bcm63xx_usbh_phy_variant usbh_bcm6328 = {
	.regs = {
		[USBH_BRT_CONTROL1] = 0x00,
		[USBH_BRT_CONTROL2] = 0x04,
		[USBH_BRT_STATUS1] = 0x08,
		[USBH_BRT_STATUS2] = 0x0c,
		[USBH_UTMI_CONTROL1] = 0x10,
		[USBH_TEST_PORT_CONTROL] = 0x14,
		[USBH_PLL_CONTROL1] = 0x18,
		[USBH_SWAP_CONTROL] = 0x1c,
		[USBH_GENERIC_CONTROL] = 0x20,
		[USBH_FRAME_ADJUST_VALUE] = 0x24,
		[USBH_SETUP] = 0x28,
		[USBH_MDIO] = 0x2c,
		[USBH_MDIO32] = 0x30,
		[USBH_USB_SIM_CONTROL] = 0x34,
	},
	.setup_set = USBH_S_IOC,
	.swapctl_dev_set = USBH_SC_USB_DEVICE_SEL,
	.utmictl1_dev_set = USBH_UC1_DEV_MODE_SEL,
};

static const struct bcm63xx_usbh_phy_variant usbh_bcm6358 = {
	.regs = {
		[USBH_BRT_CONTROL1] = -1,
		[USBH_BRT_CONTROL2] = -1,
		[USBH_BRT_STATUS1] = -1,
		[USBH_BRT_STATUS2] = -1,
		[USBH_UTMI_CONTROL1] = -1,
		[USBH_TEST_PORT_CONTROL] = 0x24,
		[USBH_PLL_CONTROL1] = -1,
		[USBH_SWAP_CONTROL] = 0x00,
		[USBH_GENERIC_CONTROL] = -1,
		[USBH_FRAME_ADJUST_VALUE] = -1,
		[USBH_SETUP] = -1,
		[USBH_MDIO] = -1,
		[USBH_MDIO32] = -1,
		[USBH_USB_SIM_CONTROL] = -1,
	},
	/*
	 * The magic value comes for the original vendor BSP
	 * and is needed for USB to work. Datasheet does not
	 * help, so the magic value is used as-is.
	 */
	.tpc_val = 0x1c0020,
};

static const struct bcm63xx_usbh_phy_variant usbh_bcm6368 = {
	.regs = {
		[USBH_BRT_CONTROL1] = 0x00,
		[USBH_BRT_CONTROL2] = 0x04,
		[USBH_BRT_STATUS1] = 0x08,
		[USBH_BRT_STATUS2] = 0x0c,
		[USBH_UTMI_CONTROL1] = 0x10,
		[USBH_TEST_PORT_CONTROL] = 0x14,
		[USBH_PLL_CONTROL1] = 0x18,
		[USBH_SWAP_CONTROL] = 0x1c,
		[USBH_GENERIC_CONTROL] = -1,
		[USBH_FRAME_ADJUST_VALUE] = 0x24,
		[USBH_SETUP] = 0x28,
		[USBH_MDIO] = 0x2c,
		[USBH_MDIO32] = 0x30,
		[USBH_USB_SIM_CONTROL] = 0x34,
	},
	.power_pllc_clr = USBH_PLLC_PLL_IDDQ_PWRDN | USBH_PLLC_PLL_PWRDN_DELAY,
	.setup_set = USBH_S_IOC,
	.swapctl_dev_set = USBH_SC_USB_DEVICE_SEL,
	.utmictl1_dev_set = USBH_UC1_DEV_MODE_SEL,
};

static const struct bcm63xx_usbh_phy_variant usbh_bcm63268 = {
	.regs = {
		[USBH_BRT_CONTROL1] = 0x00,
		[USBH_BRT_CONTROL2] = 0x04,
		[USBH_BRT_STATUS1] = 0x08,
		[USBH_BRT_STATUS2] = 0x0c,
		[USBH_UTMI_CONTROL1] = 0x10,
		[USBH_TEST_PORT_CONTROL] = 0x14,
		[USBH_PLL_CONTROL1] = 0x18,
		[USBH_SWAP_CONTROL] = 0x1c,
		[USBH_GENERIC_CONTROL] = 0x20,
		[USBH_FRAME_ADJUST_VALUE] = 0x24,
		[USBH_SETUP] = 0x28,
		[USBH_MDIO] = 0x2c,
		[USBH_MDIO32] = 0x30,
		[USBH_USB_SIM_CONTROL] = 0x34,
	},
	.power_pllc_clr = USBH_PLLC_PLL_IDDQ_PWRDN | USBH_PLLC_PLL_PWRDN_DELAY,
	.setup_clr = USBH_S_IPP,
	.setup_set = USBH_S_IOC,
	.swapctl_dev_set = USBH_SC_USB_DEVICE_SEL,
	.utmictl1_dev_set = USBH_UC1_DEV_MODE_SEL,
};

static inline bool usbh_has_reg(struct bcm63xx_usbh_phy *usbh, int reg)
{
	return (usbh->variant->regs[reg] >= 0);
}

static inline u32 usbh_readl(struct bcm63xx_usbh_phy *usbh, int reg)
{
	return __raw_readl(usbh->base + usbh->variant->regs[reg]);
}

static inline void usbh_writel(struct bcm63xx_usbh_phy *usbh, int reg,
			       u32 value)
{
	__raw_writel(value, usbh->base + usbh->variant->regs[reg]);
}

static int bcm63xx_usbh_phy_init(struct phy *phy)
{
	struct bcm63xx_usbh_phy *usbh = phy_get_drvdata(phy);
	int ret;

	ret = clk_prepare_enable(usbh->usbh_clk);
	if (ret) {
		dev_err(&phy->dev, "unable to enable usbh clock: %d\n", ret);
		return ret;
	}

	ret = clk_prepare_enable(usbh->usb_ref_clk);
	if (ret) {
		dev_err(&phy->dev, "unable to enable usb_ref clock: %d\n", ret);
		clk_disable_unprepare(usbh->usbh_clk);
		return ret;
	}

	ret = reset_control_reset(usbh->reset);
	if (ret) {
		dev_err(&phy->dev, "unable to reset device: %d\n", ret);
		clk_disable_unprepare(usbh->usb_ref_clk);
		clk_disable_unprepare(usbh->usbh_clk);
		return ret;
	}

	/* Configure to work in native CPU endian */
	if (usbh_has_reg(usbh, USBH_SWAP_CONTROL)) {
		u32 val = usbh_readl(usbh, USBH_SWAP_CONTROL);

		val |= USBH_SC_EHCI_DATA_SWAP;
		val &= ~USBH_SC_EHCI_ENDIAN_SWAP;

		val |= USBH_SC_OHCI_DATA_SWAP;
		val &= ~USBH_SC_OHCI_ENDIAN_SWAP;

		if (usbh->device_mode && usbh->variant->swapctl_dev_set)
			val |= usbh->variant->swapctl_dev_set;

		usbh_writel(usbh, USBH_SWAP_CONTROL, val);
	}

	if (usbh_has_reg(usbh, USBH_SETUP)) {
		u32 val = usbh_readl(usbh, USBH_SETUP);

		val |= usbh->variant->setup_set;
		val &= ~usbh->variant->setup_clr;

		usbh_writel(usbh, USBH_SETUP, val);
	}

	if (usbh_has_reg(usbh, USBH_USB_SIM_CONTROL)) {
		u32 val = usbh_readl(usbh, USBH_USB_SIM_CONTROL);

		val |= usbh->variant->usc_set;

		usbh_writel(usbh, USBH_USB_SIM_CONTROL, val);
	}

	if (usbh->variant->tpc_val &&
	    usbh_has_reg(usbh, USBH_TEST_PORT_CONTROL))
		usbh_writel(usbh, USBH_TEST_PORT_CONTROL,
			    usbh->variant->tpc_val);

	if (usbh->device_mode &&
	    usbh_has_reg(usbh, USBH_UTMI_CONTROL1) &&
	    usbh->variant->utmictl1_dev_set) {
		u32 val = usbh_readl(usbh, USBH_UTMI_CONTROL1);

		val |= usbh->variant->utmictl1_dev_set;

		usbh_writel(usbh, USBH_UTMI_CONTROL1, val);
	}

	return 0;
}

static int bcm63xx_usbh_phy_power_on(struct phy *phy)
{
	struct bcm63xx_usbh_phy *usbh = phy_get_drvdata(phy);

	if (usbh_has_reg(usbh, USBH_PLL_CONTROL1)) {
		u32 val = usbh_readl(usbh, USBH_PLL_CONTROL1);

		val |= usbh->variant->power_pllc_set;
		val &= ~usbh->variant->power_pllc_clr;

		usbh_writel(usbh, USBH_PLL_CONTROL1, val);
	}

	return 0;
}

static int bcm63xx_usbh_phy_power_off(struct phy *phy)
{
	struct bcm63xx_usbh_phy *usbh = phy_get_drvdata(phy);

	if (usbh_has_reg(usbh, USBH_PLL_CONTROL1)) {
		u32 val = usbh_readl(usbh, USBH_PLL_CONTROL1);

		val &= ~usbh->variant->power_pllc_set;
		val |= usbh->variant->power_pllc_clr;

		usbh_writel(usbh, USBH_PLL_CONTROL1, val);
	}

	return 0;
}

static int bcm63xx_usbh_phy_exit(struct phy *phy)
{
	struct bcm63xx_usbh_phy *usbh = phy_get_drvdata(phy);

	clk_disable_unprepare(usbh->usbh_clk);
	clk_disable_unprepare(usbh->usb_ref_clk);

	return 0;
}

static const struct phy_ops bcm63xx_usbh_phy_ops = {
	.exit = bcm63xx_usbh_phy_exit,
	.init = bcm63xx_usbh_phy_init,
	.power_off = bcm63xx_usbh_phy_power_off,
	.power_on = bcm63xx_usbh_phy_power_on,
	.owner = THIS_MODULE,
};

static struct phy *bcm63xx_usbh_phy_xlate(struct device *dev,
					  struct of_phandle_args *args)
{
	struct bcm63xx_usbh_phy *usbh = dev_get_drvdata(dev);

	usbh->device_mode = !!args->args[0];

	return of_phy_simple_xlate(dev, args);
}

static int __init bcm63xx_usbh_phy_probe(struct platform_device *pdev)
{
	struct device *dev = &pdev->dev;
	struct bcm63xx_usbh_phy	*usbh;
	const struct bcm63xx_usbh_phy_variant *variant;
	struct phy *phy;
	struct phy_provider *phy_provider;

	usbh = devm_kzalloc(dev, sizeof(*usbh), GFP_KERNEL);
	if (!usbh)
		return -ENOMEM;

	variant = device_get_match_data(dev);
	if (!variant)
		return -EINVAL;
	usbh->variant = variant;

	usbh->base = devm_platform_ioremap_resource(pdev, 0);
	if (IS_ERR(usbh->base))
		return PTR_ERR(usbh->base);

	usbh->reset = devm_reset_control_get_exclusive(dev, NULL);
	if (IS_ERR(usbh->reset)) {
		if (PTR_ERR(usbh->reset) != -EPROBE_DEFER)
			dev_err(dev, "failed to get reset\n");
		return PTR_ERR(usbh->reset);
	}

	usbh->usbh_clk = devm_clk_get_optional(dev, "usbh");
	if (IS_ERR(usbh->usbh_clk))
		return PTR_ERR(usbh->usbh_clk);

	usbh->usb_ref_clk = devm_clk_get_optional(dev, "usb_ref");
	if (IS_ERR(usbh->usb_ref_clk))
		return PTR_ERR(usbh->usb_ref_clk);

	phy = devm_phy_create(dev, NULL, &bcm63xx_usbh_phy_ops);
	if (IS_ERR(phy)) {
		dev_err(dev, "failed to create PHY\n");
		return PTR_ERR(phy);
	}

	platform_set_drvdata(pdev, usbh);
	phy_set_drvdata(phy, usbh);

	phy_provider = devm_of_phy_provider_register(dev,
						     bcm63xx_usbh_phy_xlate);
	if (IS_ERR(phy_provider)) {
		dev_err(dev, "failed to register PHY provider\n");
		return PTR_ERR(phy_provider);
	}

	dev_dbg(dev, "Registered BCM63xx USB PHY driver\n");

	return 0;
}

static const struct of_device_id bcm63xx_usbh_phy_ids[] __initconst = {
	{ .compatible = "brcm,bcm6318-usbh-phy", .data = &usbh_bcm6318 },
	{ .compatible = "brcm,bcm6328-usbh-phy", .data = &usbh_bcm6328 },
	{ .compatible = "brcm,bcm6358-usbh-phy", .data = &usbh_bcm6358 },
	{ .compatible = "brcm,bcm6362-usbh-phy", .data = &usbh_bcm6368 },
	{ .compatible = "brcm,bcm6368-usbh-phy", .data = &usbh_bcm6368 },
	{ .compatible = "brcm,bcm63268-usbh-phy", .data = &usbh_bcm63268 },
	{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, bcm63xx_usbh_phy_ids);

static struct platform_driver bcm63xx_usbh_phy_driver __refdata = {
	.driver	= {
		.name = "bcm63xx-usbh-phy",
		.of_match_table = bcm63xx_usbh_phy_ids,
	},
	.probe	= bcm63xx_usbh_phy_probe,
};
module_platform_driver(bcm63xx_usbh_phy_driver);

MODULE_DESCRIPTION("BCM63xx USBH PHY driver");
MODULE_AUTHOR("Álvaro Fernández Rojas <noltari@gmail.com>");
MODULE_AUTHOR("Simon Arlott");
MODULE_LICENSE("GPL");