1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
|
// SPDX-License-Identifier: GPL-2.0
/*
* drivers/i2c/busses/i2c-mt7621.c
*
* Copyright (C) 2013 Steven Liu <steven_liu@mediatek.com>
* Copyright (C) 2016 Michael Lee <igvtee@gmail.com>
* Copyright (C) 2018 Jan Breuer <jan.breuer@jaybee.cz>
*
* Improve driver for i2cdetect from i2c-tools to detect i2c devices on the bus.
* (C) 2014 Sittisak <sittisaks@hotmail.com>
*/
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/i2c.h>
#include <linux/io.h>
#include <linux/iopoll.h>
#include <linux/module.h>
#include <linux/of_platform.h>
#include <linux/reset.h>
#define REG_SM0CFG2_REG 0x28
#define REG_SM0CTL0_REG 0x40
#define REG_SM0CTL1_REG 0x44
#define REG_SM0D0_REG 0x50
#define REG_SM0D1_REG 0x54
#define REG_PINTEN_REG 0x5c
#define REG_PINTST_REG 0x60
#define REG_PINTCL_REG 0x64
/* REG_SM0CFG2_REG */
#define SM0CFG2_IS_AUTOMODE BIT(0)
/* REG_SM0CTL0_REG */
#define SM0CTL0_ODRAIN BIT(31)
#define SM0CTL0_CLK_DIV_MASK (0x7ff << 16)
#define SM0CTL0_CLK_DIV_MAX 0x7ff
#define SM0CTL0_CS_STATUS BIT(4)
#define SM0CTL0_SCL_STATE BIT(3)
#define SM0CTL0_SDA_STATE BIT(2)
#define SM0CTL0_EN BIT(1)
#define SM0CTL0_SCL_STRETCH BIT(0)
/* REG_SM0CTL1_REG */
#define SM0CTL1_ACK_MASK (0xff << 16)
#define SM0CTL1_PGLEN_MASK (0x7 << 8)
#define SM0CTL1_PGLEN(x) ((((x) - 1) << 8) & SM0CTL1_PGLEN_MASK)
#define SM0CTL1_READ (5 << 4)
#define SM0CTL1_READ_LAST (4 << 4)
#define SM0CTL1_STOP (3 << 4)
#define SM0CTL1_WRITE (2 << 4)
#define SM0CTL1_START (1 << 4)
#define SM0CTL1_MODE_MASK (0x7 << 4)
#define SM0CTL1_TRI BIT(0)
/* timeout waiting for I2C devices to respond */
#define TIMEOUT_MS 1000
struct mtk_i2c {
void __iomem *base;
struct device *dev;
struct i2c_adapter adap;
u32 bus_freq;
u32 clk_div;
u32 flags;
struct clk *clk;
};
static int mtk_i2c_wait_idle(struct mtk_i2c *i2c)
{
int ret;
u32 val;
ret = readl_relaxed_poll_timeout(i2c->base + REG_SM0CTL1_REG,
val, !(val & SM0CTL1_TRI),
10, TIMEOUT_MS * 1000);
if (ret)
dev_dbg(i2c->dev, "idle err(%d)\n", ret);
return ret;
}
static void mtk_i2c_reset(struct mtk_i2c *i2c)
{
int ret;
ret = device_reset(i2c->adap.dev.parent);
if (ret)
dev_err(i2c->dev, "I2C reset failed!\n");
/*
* Don't set SM0CTL0_ODRAIN as its bit meaning is inverted. To
* configure open-drain mode, this bit needs to be cleared.
*/
iowrite32(((i2c->clk_div << 16) & SM0CTL0_CLK_DIV_MASK) | SM0CTL0_EN |
SM0CTL0_SCL_STRETCH, i2c->base + REG_SM0CTL0_REG);
iowrite32(0, i2c->base + REG_SM0CFG2_REG);
}
static void mtk_i2c_dump_reg(struct mtk_i2c *i2c)
{
dev_dbg(i2c->dev,
"SM0CFG2 %08x, SM0CTL0 %08x, SM0CTL1 %08x, SM0D0 %08x, SM0D1 %08x\n",
ioread32(i2c->base + REG_SM0CFG2_REG),
ioread32(i2c->base + REG_SM0CTL0_REG),
ioread32(i2c->base + REG_SM0CTL1_REG),
ioread32(i2c->base + REG_SM0D0_REG),
ioread32(i2c->base + REG_SM0D1_REG));
}
static int mtk_i2c_check_ack(struct mtk_i2c *i2c, u32 expected)
{
u32 ack = readl_relaxed(i2c->base + REG_SM0CTL1_REG);
u32 ack_expected = (expected << 16) & SM0CTL1_ACK_MASK;
return ((ack & ack_expected) == ack_expected) ? 0 : -ENXIO;
}
static int mtk_i2c_master_start(struct mtk_i2c *i2c)
{
iowrite32(SM0CTL1_START | SM0CTL1_TRI, i2c->base + REG_SM0CTL1_REG);
return mtk_i2c_wait_idle(i2c);
}
static int mtk_i2c_master_stop(struct mtk_i2c *i2c)
{
iowrite32(SM0CTL1_STOP | SM0CTL1_TRI, i2c->base + REG_SM0CTL1_REG);
return mtk_i2c_wait_idle(i2c);
}
static int mtk_i2c_master_cmd(struct mtk_i2c *i2c, u32 cmd, int page_len)
{
iowrite32(cmd | SM0CTL1_TRI | SM0CTL1_PGLEN(page_len),
i2c->base + REG_SM0CTL1_REG);
return mtk_i2c_wait_idle(i2c);
}
static int mtk_i2c_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
int num)
{
struct mtk_i2c *i2c;
struct i2c_msg *pmsg;
u16 addr;
int i, j, ret, len, page_len;
u32 cmd;
u32 data[2];
i2c = i2c_get_adapdata(adap);
for (i = 0; i < num; i++) {
pmsg = &msgs[i];
/* wait hardware idle */
ret = mtk_i2c_wait_idle(i2c);
if (ret)
goto err_timeout;
/* start sequence */
ret = mtk_i2c_master_start(i2c);
if (ret)
goto err_timeout;
/* write address */
if (pmsg->flags & I2C_M_TEN) {
/* 10 bits address */
addr = 0xf0 | ((pmsg->addr >> 7) & 0x06);
addr |= (pmsg->addr & 0xff) << 8;
if (pmsg->flags & I2C_M_RD)
addr |= 1;
iowrite32(addr, i2c->base + REG_SM0D0_REG);
ret = mtk_i2c_master_cmd(i2c, SM0CTL1_WRITE, 2);
if (ret)
goto err_timeout;
} else {
/* 7 bits address */
addr = i2c_8bit_addr_from_msg(pmsg);
iowrite32(addr, i2c->base + REG_SM0D0_REG);
ret = mtk_i2c_master_cmd(i2c, SM0CTL1_WRITE, 1);
if (ret)
goto err_timeout;
}
/* check address ACK */
if (!(pmsg->flags & I2C_M_IGNORE_NAK)) {
ret = mtk_i2c_check_ack(i2c, BIT(0));
if (ret)
goto err_ack;
}
/* transfer data */
for (len = pmsg->len, j = 0; len > 0; len -= 8, j += 8) {
page_len = (len >= 8) ? 8 : len;
if (pmsg->flags & I2C_M_RD) {
cmd = (len > 8) ?
SM0CTL1_READ : SM0CTL1_READ_LAST;
} else {
memcpy(data, &pmsg->buf[j], page_len);
iowrite32(data[0], i2c->base + REG_SM0D0_REG);
iowrite32(data[1], i2c->base + REG_SM0D1_REG);
cmd = SM0CTL1_WRITE;
}
ret = mtk_i2c_master_cmd(i2c, cmd, page_len);
if (ret)
goto err_timeout;
if (pmsg->flags & I2C_M_RD) {
data[0] = ioread32(i2c->base + REG_SM0D0_REG);
data[1] = ioread32(i2c->base + REG_SM0D1_REG);
memcpy(&pmsg->buf[j], data, page_len);
} else {
if (!(pmsg->flags & I2C_M_IGNORE_NAK)) {
ret = mtk_i2c_check_ack(i2c,
(1 << page_len)
- 1);
if (ret)
goto err_ack;
}
}
}
}
ret = mtk_i2c_master_stop(i2c);
if (ret)
goto err_timeout;
/* the return value is number of executed messages */
return i;
err_ack:
ret = mtk_i2c_master_stop(i2c);
if (ret)
goto err_timeout;
return -ENXIO;
err_timeout:
mtk_i2c_dump_reg(i2c);
mtk_i2c_reset(i2c);
return ret;
}
static u32 mtk_i2c_func(struct i2c_adapter *a)
{
return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_PROTOCOL_MANGLING;
}
static const struct i2c_algorithm mtk_i2c_algo = {
.master_xfer = mtk_i2c_master_xfer,
.functionality = mtk_i2c_func,
};
static const struct of_device_id i2c_mtk_dt_ids[] = {
{ .compatible = "mediatek,mt7621-i2c" },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, i2c_mtk_dt_ids);
static void mtk_i2c_init(struct mtk_i2c *i2c)
{
i2c->clk_div = clk_get_rate(i2c->clk) / i2c->bus_freq - 1;
if (i2c->clk_div < 99)
i2c->clk_div = 99;
if (i2c->clk_div > SM0CTL0_CLK_DIV_MAX)
i2c->clk_div = SM0CTL0_CLK_DIV_MAX;
mtk_i2c_reset(i2c);
}
static int mtk_i2c_probe(struct platform_device *pdev)
{
struct resource *res;
struct mtk_i2c *i2c;
struct i2c_adapter *adap;
int ret;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
i2c = devm_kzalloc(&pdev->dev, sizeof(struct mtk_i2c), GFP_KERNEL);
if (!i2c)
return -ENOMEM;
i2c->base = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(i2c->base))
return PTR_ERR(i2c->base);
i2c->clk = devm_clk_get(&pdev->dev, NULL);
if (IS_ERR(i2c->clk)) {
dev_err(&pdev->dev, "no clock defined\n");
return PTR_ERR(i2c->clk);
}
ret = clk_prepare_enable(i2c->clk);
if (ret) {
dev_err(&pdev->dev, "Unable to enable clock\n");
return ret;
}
i2c->dev = &pdev->dev;
if (of_property_read_u32(pdev->dev.of_node, "clock-frequency",
&i2c->bus_freq))
i2c->bus_freq = 100000;
if (i2c->bus_freq == 0) {
dev_warn(i2c->dev, "clock-frequency 0 not supported\n");
return -EINVAL;
}
adap = &i2c->adap;
adap->owner = THIS_MODULE;
adap->algo = &mtk_i2c_algo;
adap->retries = 3;
adap->dev.parent = &pdev->dev;
i2c_set_adapdata(adap, i2c);
adap->dev.of_node = pdev->dev.of_node;
strlcpy(adap->name, dev_name(&pdev->dev), sizeof(adap->name));
platform_set_drvdata(pdev, i2c);
mtk_i2c_init(i2c);
ret = i2c_add_adapter(adap);
if (ret < 0)
return ret;
dev_info(&pdev->dev, "clock %u kHz\n", i2c->bus_freq / 1000);
return ret;
}
static int mtk_i2c_remove(struct platform_device *pdev)
{
struct mtk_i2c *i2c = platform_get_drvdata(pdev);
clk_disable_unprepare(i2c->clk);
i2c_del_adapter(&i2c->adap);
return 0;
}
static struct platform_driver mtk_i2c_driver = {
.probe = mtk_i2c_probe,
.remove = mtk_i2c_remove,
.driver = {
.owner = THIS_MODULE,
.name = "i2c-mt7621",
.of_match_table = i2c_mtk_dt_ids,
},
};
module_platform_driver(mtk_i2c_driver);
MODULE_AUTHOR("Steven Liu");
MODULE_DESCRIPTION("MT7621 I2C host driver");
MODULE_LICENSE("GPL v2");
MODULE_ALIAS("platform:MT7621-I2C");
|